diff --git a/CREDITS b/CREDITS
index 939da46..2b39168 100644
--- a/CREDITS
+++ b/CREDITS
@@ -3786,14 +3786,11 @@
 
 N: David Woodhouse
 E: dwmw2@infradead.org
-D: ARCnet stuff, Applicom board driver, SO_BINDTODEVICE,
-D: some Alpha platform porting from 2.0, Memory Technology Devices,
-D: Acquire watchdog timer, PC speaker driver maintenance,
+D: JFFS2 file system, Memory Technology Device subsystem,
 D: various other stuff that annoyed me by not working.
-S: c/o Red Hat Engineering
-S: Rustat House
-S: 60 Clifton Road
-S: Cambridge. CB1 7EG
+S: c/o Intel Corporation
+S: Pipers Way
+S: Swindon. SN3 1RJ
 S: England
 
 N: Chris Wright
diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt
index b462bb1..5244169 100644
--- a/Documentation/DMA-API.txt
+++ b/Documentation/DMA-API.txt
@@ -170,16 +170,15 @@
 u64
 dma_get_required_mask(struct device *dev)
 
-After setting the mask with dma_set_mask(), this API returns the
-actual mask (within that already set) that the platform actually
-requires to operate efficiently.  Usually this means the returned mask
+This API returns the mask that the platform requires to
+operate efficiently.  Usually this means the returned mask
 is the minimum required to cover all of memory.  Examining the
 required mask gives drivers with variable descriptor sizes the
 opportunity to use smaller descriptors as necessary.
 
 Requesting the required mask does not alter the current mask.  If you
-wish to take advantage of it, you should issue another dma_set_mask()
-call to lower the mask again.
+wish to take advantage of it, you should issue a dma_set_mask()
+call to set the mask to the value returned.
 
 
 Part Id - Streaming DMA mappings
diff --git a/Documentation/accounting/getdelays.c b/Documentation/accounting/getdelays.c
index cc49400..7ea2311 100644
--- a/Documentation/accounting/getdelays.c
+++ b/Documentation/accounting/getdelays.c
@@ -392,6 +392,10 @@
 			goto err;
 		}
 	}
+	if (!maskset && !tid && !containerset) {
+		usage();
+		goto err;
+	}
 
 	do {
 		int i;
diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt
index e33ee74..d9e5d6f 100644
--- a/Documentation/cgroups/cgroups.txt
+++ b/Documentation/cgroups/cgroups.txt
@@ -1,7 +1,8 @@
 				CGROUPS
 				-------
 
-Written by Paul Menage <menage@google.com> based on Documentation/cpusets.txt
+Written by Paul Menage <menage@google.com> based on
+Documentation/cgroups/cpusets.txt
 
 Original copyright statements from cpusets.txt:
 Portions Copyright (C) 2004 BULL SA.
@@ -68,7 +69,7 @@
 tracking. The intention is that other subsystems hook into the generic
 cgroup support to provide new attributes for cgroups, such as
 accounting/limiting the resources which processes in a cgroup can
-access. For example, cpusets (see Documentation/cpusets.txt) allows
+access. For example, cpusets (see Documentation/cgroups/cpusets.txt) allows
 you to associate a set of CPUs and a set of memory nodes with the
 tasks in each cgroup.
 
diff --git a/Documentation/controllers/cpuacct.txt b/Documentation/cgroups/cpuacct.txt
similarity index 100%
rename from Documentation/controllers/cpuacct.txt
rename to Documentation/cgroups/cpuacct.txt
diff --git a/Documentation/cpusets.txt b/Documentation/cgroups/cpusets.txt
similarity index 100%
rename from Documentation/cpusets.txt
rename to Documentation/cgroups/cpusets.txt
diff --git a/Documentation/controllers/devices.txt b/Documentation/cgroups/devices.txt
similarity index 100%
rename from Documentation/controllers/devices.txt
rename to Documentation/cgroups/devices.txt
diff --git a/Documentation/controllers/memcg_test.txt b/Documentation/cgroups/memcg_test.txt
similarity index 99%
rename from Documentation/controllers/memcg_test.txt
rename to Documentation/cgroups/memcg_test.txt
index 08d4d3e..19533f9 100644
--- a/Documentation/controllers/memcg_test.txt
+++ b/Documentation/cgroups/memcg_test.txt
@@ -6,7 +6,7 @@
 is complex. This is a document for memcg's internal behavior.
 Please note that implementation details can be changed.
 
-(*) Topics on API should be in Documentation/controllers/memory.txt)
+(*) Topics on API should be in Documentation/cgroups/memory.txt)
 
 0. How to record usage ?
    2 objects are used.
diff --git a/Documentation/controllers/memory.txt b/Documentation/cgroups/memory.txt
similarity index 100%
rename from Documentation/controllers/memory.txt
rename to Documentation/cgroups/memory.txt
diff --git a/Documentation/controllers/resource_counter.txt b/Documentation/cgroups/resource_counter.txt
similarity index 100%
rename from Documentation/controllers/resource_counter.txt
rename to Documentation/cgroups/resource_counter.txt
diff --git a/Documentation/filesystems/nfs-rdma.txt b/Documentation/filesystems/nfs-rdma.txt
index 44bd766..85eaead 100644
--- a/Documentation/filesystems/nfs-rdma.txt
+++ b/Documentation/filesystems/nfs-rdma.txt
@@ -251,7 +251,7 @@
 
     Instruct the server to listen on the RDMA transport:
 
-    $ echo rdma 2050 > /proc/fs/nfsd/portlist
+    $ echo rdma 20049 > /proc/fs/nfsd/portlist
 
   - On the client system
 
@@ -263,7 +263,7 @@
     Regardless of how the client was built (module or built-in), use this
     command to mount the NFS/RDMA server:
 
-    $ mount -o rdma,port=2050 <IPoIB-server-name-or-address>:/<export> /mnt
+    $ mount -o rdma,port=20049 <IPoIB-server-name-or-address>:/<export> /mnt
 
     To verify that the mount is using RDMA, run "cat /proc/mounts" and check
     the "proto" field for the given mount.
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index d105eb45..bbebc3a 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -1371,292 +1371,8 @@
 2.4 /proc/sys/vm - The virtual memory subsystem
 -----------------------------------------------
 
-The files  in  this directory can be used to tune the operation of the virtual
-memory (VM)  subsystem  of  the  Linux  kernel.
-
-vfs_cache_pressure
-------------------
-
-Controls the tendency of the kernel to reclaim the memory which is used for
-caching of directory and inode objects.
-
-At the default value of vfs_cache_pressure=100 the kernel will attempt to
-reclaim dentries and inodes at a "fair" rate with respect to pagecache and
-swapcache reclaim.  Decreasing vfs_cache_pressure causes the kernel to prefer
-to retain dentry and inode caches.  Increasing vfs_cache_pressure beyond 100
-causes the kernel to prefer to reclaim dentries and inodes.
-
-dirty_background_bytes
-----------------------
-
-Contains the amount of dirty memory at which the pdflush background writeback
-daemon will start writeback.
-
-If dirty_background_bytes is written, dirty_background_ratio becomes a function
-of its value (dirty_background_bytes / the amount of dirtyable system memory).
-
-dirty_background_ratio
-----------------------
-
-Contains, as a percentage of the dirtyable system memory (free pages + mapped
-pages + file cache, not including locked pages and HugePages), the number of
-pages at which the pdflush background writeback daemon will start writing out
-dirty data.
-
-If dirty_background_ratio is written, dirty_background_bytes becomes a function
-of its value (dirty_background_ratio * the amount of dirtyable system memory).
-
-dirty_bytes
------------
-
-Contains the amount of dirty memory at which a process generating disk writes
-will itself start writeback.
-
-If dirty_bytes is written, dirty_ratio becomes a function of its value
-(dirty_bytes / the amount of dirtyable system memory).
-
-dirty_ratio
------------
-
-Contains, as a percentage of the dirtyable system memory (free pages + mapped
-pages + file cache, not including locked pages and HugePages), the number of
-pages at which a process which is generating disk writes will itself start
-writing out dirty data.
-
-If dirty_ratio is written, dirty_bytes becomes a function of its value
-(dirty_ratio * the amount of dirtyable system memory).
-
-dirty_writeback_centisecs
--------------------------
-
-The pdflush writeback daemons will periodically wake up and write `old' data
-out to disk.  This tunable expresses the interval between those wakeups, in
-100'ths of a second.
-
-Setting this to zero disables periodic writeback altogether.
-
-dirty_expire_centisecs
-----------------------
-
-This tunable is used to define when dirty data is old enough to be eligible
-for writeout by the pdflush daemons.  It is expressed in 100'ths of a second. 
-Data which has been dirty in-memory for longer than this interval will be
-written out next time a pdflush daemon wakes up.
-
-highmem_is_dirtyable
---------------------
-
-Only present if CONFIG_HIGHMEM is set.
-
-This defaults to 0 (false), meaning that the ratios set above are calculated
-as a percentage of lowmem only.  This protects against excessive scanning
-in page reclaim, swapping and general VM distress.
-
-Setting this to 1 can be useful on 32 bit machines where you want to make
-random changes within an MMAPed file that is larger than your available
-lowmem without causing large quantities of random IO.  Is is safe if the
-behavior of all programs running on the machine is known and memory will
-not be otherwise stressed.
-
-legacy_va_layout
-----------------
-
-If non-zero, this sysctl disables the new 32-bit mmap mmap layout - the kernel
-will use the legacy (2.4) layout for all processes.
-
-lowmem_reserve_ratio
----------------------
-
-For some specialised workloads on highmem machines it is dangerous for
-the kernel to allow process memory to be allocated from the "lowmem"
-zone.  This is because that memory could then be pinned via the mlock()
-system call, or by unavailability of swapspace.
-
-And on large highmem machines this lack of reclaimable lowmem memory
-can be fatal.
-
-So the Linux page allocator has a mechanism which prevents allocations
-which _could_ use highmem from using too much lowmem.  This means that
-a certain amount of lowmem is defended from the possibility of being
-captured into pinned user memory.
-
-(The same argument applies to the old 16 megabyte ISA DMA region.  This
-mechanism will also defend that region from allocations which could use
-highmem or lowmem).
-
-The `lowmem_reserve_ratio' tunable determines how aggressive the kernel is
-in defending these lower zones.
-
-If you have a machine which uses highmem or ISA DMA and your
-applications are using mlock(), or if you are running with no swap then
-you probably should change the lowmem_reserve_ratio setting.
-
-The lowmem_reserve_ratio is an array. You can see them by reading this file.
--
-% cat /proc/sys/vm/lowmem_reserve_ratio
-256     256     32
--
-Note: # of this elements is one fewer than number of zones. Because the highest
-      zone's value is not necessary for following calculation.
-
-But, these values are not used directly. The kernel calculates # of protection
-pages for each zones from them. These are shown as array of protection pages
-in /proc/zoneinfo like followings. (This is an example of x86-64 box).
-Each zone has an array of protection pages like this.
-
--
-Node 0, zone      DMA
-  pages free     1355
-        min      3
-        low      3
-        high     4
-	:
-	:
-    numa_other   0
-        protection: (0, 2004, 2004, 2004)
-	^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-  pagesets
-    cpu: 0 pcp: 0
-        :
--
-These protections are added to score to judge whether this zone should be used
-for page allocation or should be reclaimed.
-
-In this example, if normal pages (index=2) are required to this DMA zone and
-pages_high is used for watermark, the kernel judges this zone should not be
-used because pages_free(1355) is smaller than watermark + protection[2]
-(4 + 2004 = 2008). If this protection value is 0, this zone would be used for
-normal page requirement. If requirement is DMA zone(index=0), protection[0]
-(=0) is used.
-
-zone[i]'s protection[j] is calculated by following expression.
-
-(i < j):
-  zone[i]->protection[j]
-  = (total sums of present_pages from zone[i+1] to zone[j] on the node)
-    / lowmem_reserve_ratio[i];
-(i = j):
-   (should not be protected. = 0;
-(i > j):
-   (not necessary, but looks 0)
-
-The default values of lowmem_reserve_ratio[i] are
-    256 (if zone[i] means DMA or DMA32 zone)
-    32  (others).
-As above expression, they are reciprocal number of ratio.
-256 means 1/256. # of protection pages becomes about "0.39%" of total present
-pages of higher zones on the node.
-
-If you would like to protect more pages, smaller values are effective.
-The minimum value is 1 (1/1 -> 100%).
-
-page-cluster
-------------
-
-page-cluster controls the number of pages which are written to swap in
-a single attempt.  The swap I/O size.
-
-It is a logarithmic value - setting it to zero means "1 page", setting
-it to 1 means "2 pages", setting it to 2 means "4 pages", etc.
-
-The default value is three (eight pages at a time).  There may be some
-small benefits in tuning this to a different value if your workload is
-swap-intensive.
-
-overcommit_memory
------------------
-
-Controls overcommit of system memory, possibly allowing processes
-to allocate (but not use) more memory than is actually available.
-
-
-0	-	Heuristic overcommit handling. Obvious overcommits of
-		address space are refused. Used for a typical system. It
-		ensures a seriously wild allocation fails while allowing
-		overcommit to reduce swap usage.  root is allowed to
-		allocate slightly more memory in this mode. This is the
-		default.
-
-1	-	Always overcommit. Appropriate for some scientific
-		applications.
-
-2	-	Don't overcommit. The total address space commit
-		for the system is not permitted to exceed swap plus a
-		configurable percentage (default is 50) of physical RAM.
-		Depending on the percentage you use, in most situations
-		this means a process will not be killed while attempting
-		to use already-allocated memory but will receive errors
-		on memory allocation as	appropriate.
-
-overcommit_ratio
-----------------
-
-Percentage of physical memory size to include in overcommit calculations
-(see above.)
-
-Memory allocation limit = swapspace + physmem * (overcommit_ratio / 100)
-
-	swapspace = total size of all swap areas
-	physmem = size of physical memory in system
-
-nr_hugepages and hugetlb_shm_group
-----------------------------------
-
-nr_hugepages configures number of hugetlb page reserved for the system.
-
-hugetlb_shm_group contains group id that is allowed to create SysV shared
-memory segment using hugetlb page.
-
-hugepages_treat_as_movable
---------------------------
-
-This parameter is only useful when kernelcore= is specified at boot time to
-create ZONE_MOVABLE for pages that may be reclaimed or migrated. Huge pages
-are not movable so are not normally allocated from ZONE_MOVABLE. A non-zero
-value written to hugepages_treat_as_movable allows huge pages to be allocated
-from ZONE_MOVABLE.
-
-Once enabled, the ZONE_MOVABLE is treated as an area of memory the huge
-pages pool can easily grow or shrink within. Assuming that applications are
-not running that mlock() a lot of memory, it is likely the huge pages pool
-can grow to the size of ZONE_MOVABLE by repeatedly entering the desired value
-into nr_hugepages and triggering page reclaim.
-
-laptop_mode
------------
-
-laptop_mode is a knob that controls "laptop mode". All the things that are
-controlled by this knob are discussed in Documentation/laptops/laptop-mode.txt.
-
-block_dump
-----------
-
-block_dump enables block I/O debugging when set to a nonzero value. More
-information on block I/O debugging is in Documentation/laptops/laptop-mode.txt.
-
-swap_token_timeout
-------------------
-
-This file contains valid hold time of swap out protection token. The Linux
-VM has token based thrashing control mechanism and uses the token to prevent
-unnecessary page faults in thrashing situation. The unit of the value is
-second. The value would be useful to tune thrashing behavior.
-
-drop_caches
------------
-
-Writing to this will cause the kernel to drop clean caches, dentries and
-inodes from memory, causing that memory to become free.
-
-To free pagecache:
-	echo 1 > /proc/sys/vm/drop_caches
-To free dentries and inodes:
-	echo 2 > /proc/sys/vm/drop_caches
-To free pagecache, dentries and inodes:
-	echo 3 > /proc/sys/vm/drop_caches
-
-As this is a non-destructive operation and dirty objects are not freeable, the
-user should run `sync' first.
+Please see: Documentation/sysctls/vm.txt for a description of these
+entries.
 
 
 2.5 /proc/sys/dev - Device specific parameters
diff --git a/Documentation/hwmon/adt7475 b/Documentation/hwmon/adt7475
new file mode 100644
index 0000000..a2b1abe
--- /dev/null
+++ b/Documentation/hwmon/adt7475
@@ -0,0 +1,87 @@
+This describes the interface for the ADT7475 driver:
+
+(there are 4 fans, numbered fan1 to fan4):
+
+fanX_input		Read the current speed of the fan (in RPMs)
+fanX_min		Read/write the minimum speed of the fan.  Dropping
+			below this sets an alarm.
+
+(there are three PWMs, numbered pwm1 to pwm3):
+
+pwmX			Read/write the current duty cycle of the PWM.  Writes
+			only have effect when auto mode is turned off (see
+			below).  Range is 0 - 255.
+
+pwmX_enable		Fan speed control method:
+
+			0 - No control (fan at full speed)
+			1 - Manual fan speed control (using pwm[1-*])
+			2 - Automatic fan speed control
+
+pwmX_auto_channels_temp	Select which channels affect this PWM
+
+			1 - TEMP1 controls PWM
+			2 - TEMP2 controls PWM
+			4 - TEMP3 controls PWM
+			6 - TEMP2 and TEMP3 control PWM
+			7 - All three inputs control PWM
+
+pwmX_freq		Read/write the PWM frequency in Hz. The number
+			should be one of the following:
+
+			11 Hz
+			14 Hz
+			22 Hz
+			29 Hz
+			35 Hz
+			44 Hz
+			58 Hz
+			88 Hz
+
+pwmX_auto_point1_pwm	Read/write the minimum PWM duty cycle in automatic mode
+
+pwmX_auto_point2_pwm	Read/write the maximum PWM duty cycle in automatic mode
+
+(there are three temperature settings numbered temp1 to temp3):
+
+tempX_input		Read the current temperature.  The value is in milli
+			degrees of Celsius.
+
+tempX_max		Read/write the upper temperature limit - exceeding this
+			will cause an alarm.
+
+tempX_min		Read/write the lower temperature limit - exceeding this
+			will cause an alarm.
+
+tempX_offset		Read/write the temperature adjustment offset
+
+tempX_crit		Read/write the THERM limit for remote1.
+
+tempX_crit_hyst		Set the temperature value below crit where the
+			fans will stay on - this helps drive the temperature
+			low enough so it doesn't stay near the edge and
+			cause THERM to keep tripping.
+
+tempX_auto_point1_temp	Read/write the minimum temperature where the fans will
+			turn on in automatic mode.
+
+tempX_auto_point2_temp	Read/write the maximum temperature over which the fans
+			will run in automatic mode.  tempX_auto_point1_temp
+			and tempX_auto_point2_temp together define the
+			range of automatic control.
+
+tempX_alarm		Read a 1 if the max/min alarm is set
+tempX_fault		Read a 1 if either temp1 or temp3 diode has a fault
+
+(There are two voltage settings, in1 and in2):
+
+inX_input		Read the current voltage on VCC.  Value is in
+			millivolts.
+
+inX_min			read/write the minimum voltage limit.
+			Dropping below this causes an alarm.
+
+inX_max			read/write the maximum voltage limit.
+			Exceeding this causes an alarm.
+
+inX_alarm		Read a 1 if the max/min alarm is set.
diff --git a/Documentation/hwmon/lis3lv02d b/Documentation/hwmon/lis3lv02d
index 65dfb0c..0fcfc4a 100644
--- a/Documentation/hwmon/lis3lv02d
+++ b/Documentation/hwmon/lis3lv02d
@@ -13,18 +13,21 @@
 Description
 -----------
 
-This driver provides support for the accelerometer found in various HP laptops
-sporting the feature officially called "HP Mobile Data Protection System 3D" or
-"HP 3D DriveGuard". It detect automatically laptops with this sensor. Known models
-(for now the HP 2133, nc6420, nc2510, nc8510, nc84x0, nw9440 and nx9420) will
-have their axis automatically oriented on standard way (eg: you can directly
-play neverball).  The accelerometer data is readable via
+This driver provides support for the accelerometer found in various HP
+laptops sporting the feature officially called "HP Mobile Data
+Protection System 3D" or "HP 3D DriveGuard". It detect automatically
+laptops with this sensor. Known models (for now the HP 2133, nc6420,
+nc2510, nc8510, nc84x0, nw9440 and nx9420) will have their axis
+automatically oriented on standard way (eg: you can directly play
+neverball).  The accelerometer data is readable via
 /sys/devices/platform/lis3lv02d.
 
 Sysfs attributes under /sys/devices/platform/lis3lv02d/:
 position - 3D position that the accelerometer reports. Format: "(x,y,z)"
-calibrate - read: values (x, y, z) that are used as the base for input class device operation.
-            write: forces the base to be recalibrated with the current position.
+calibrate - read: values (x, y, z) that are used as the base for input
+		  class device operation.
+            write: forces the base to be recalibrated with the current
+		  position.
 rate - reports the sampling rate of the accelerometer device in HZ
 
 This driver also provides an absolute input class device, allowing
@@ -39,11 +42,12 @@
  * When the laptop is horizontal the position reported is about 0 for X and Y
 and a positive value for Z
  * If the left side is elevated, X increases (becomes positive)
- * If the front side (where the touchpad is) is elevated, Y decreases (becomes negative)
+ * If the front side (where the touchpad is) is elevated, Y decreases
+	(becomes negative)
  * If the laptop is put upside-down, Z becomes negative
 
-If your laptop model is not recognized (cf "dmesg"), you can send an email to the
-authors to add it to the database.  When reporting a new laptop, please include
-the output of "dmidecode" plus the value of /sys/devices/platform/lis3lv02d/position
-in these four cases.
+If your laptop model is not recognized (cf "dmesg"), you can send an
+email to the authors to add it to the database.  When reporting a new
+laptop, please include the output of "dmidecode" plus the value of
+/sys/devices/platform/lis3lv02d/position in these four cases.
 
diff --git a/Documentation/kbuild/kbuild.txt b/Documentation/kbuild/kbuild.txt
index 923f9dd..f3355b6 100644
--- a/Documentation/kbuild/kbuild.txt
+++ b/Documentation/kbuild/kbuild.txt
@@ -3,7 +3,7 @@
 KCPPFLAGS
 --------------------------------------------------
 Additional options to pass when preprocessing. The preprocessing options
-will be used in all cases where kbuild do preprocessing including
+will be used in all cases where kbuild does preprocessing including
 building C files and assembler files.
 
 KAFLAGS
@@ -16,7 +16,7 @@
 
 KBUILD_VERBOSE
 --------------------------------------------------
-Set the kbuild verbosity. Can be assinged same values as "V=...".
+Set the kbuild verbosity. Can be assigned same values as "V=...".
 See make help for the full list.
 Setting "V=..." takes precedence over KBUILD_VERBOSE.
 
@@ -35,14 +35,14 @@
 --------------------------------------------------
 Specify the output directory when building the kernel.
 The output directory can also be specificed using "O=...".
-Setting "O=..." takes precedence over KBUILD_OUTPUT
+Setting "O=..." takes precedence over KBUILD_OUTPUT.
 
 ARCH
 --------------------------------------------------
 Set ARCH to the architecture to be built.
 In most cases the name of the architecture is the same as the
 directory name found in the arch/ directory.
-But some architectures suach as x86 and sparc has aliases.
+But some architectures such as x86 and sparc have aliases.
 x86: i386 for 32 bit, x86_64 for 64 bit
 sparc: sparc for 32 bit, sparc64 for 64 bit
 
@@ -63,7 +63,7 @@
 INSTALL_PATH
 --------------------------------------------------
 INSTALL_PATH specifies where to place the updated kernel and system map
-images. Default is /boot, but you can set it to other values
+images. Default is /boot, but you can set it to other values.
 
 
 MODLIB
@@ -90,7 +90,7 @@
 
 INSTALL_FW_PATH
 --------------------------------------------------
-INSTALL_FW_PATH specify where to install the firmware blobs.
+INSTALL_FW_PATH specifies where to install the firmware blobs.
 The default value is:
 
     $(INSTALL_MOD_PATH)/lib/firmware
@@ -99,7 +99,7 @@
 
 INSTALL_HDR_PATH
 --------------------------------------------------
-INSTALL_HDR_PATH specify where to install user space headers when
+INSTALL_HDR_PATH specifies where to install user space headers when
 executing "make headers_*".
 The default value is:
 
@@ -112,22 +112,23 @@
 
 KBUILD_MODPOST_WARN
 --------------------------------------------------
-KBUILD_MODPOST_WARN can be set to avoid error out in case of undefined
-symbols in the final module linking stage.
+KBUILD_MODPOST_WARN can be set to avoid errors in case of undefined
+symbols in the final module linking stage. It changes such errors
+into warnings.
 
-KBUILD_MODPOST_FINAL
+KBUILD_MODPOST_NOFINAL
 --------------------------------------------------
 KBUILD_MODPOST_NOFINAL can be set to skip the final link of modules.
-This is solely usefull to speed up test compiles.
+This is solely useful to speed up test compiles.
 
 KBUILD_EXTRA_SYMBOLS
 --------------------------------------------------
-For modules use symbols from another modules.
+For modules that use symbols from other modules.
 See more details in modules.txt.
 
 ALLSOURCE_ARCHS
 --------------------------------------------------
-For tags/TAGS/cscope targets, you can specify more than one archs
-to be included in the databases, separated by blankspace. e.g.
+For tags/TAGS/cscope targets, you can specify more than one arch
+to be included in the databases, separated by blank space. E.g.:
 
     $ make ALLSOURCE_ARCHS="x86 mips arm" tags
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 8511d35..d8362cf 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -577,9 +577,6 @@
 			a memory unit (amount[KMG]). See also
 			Documentation/kdump/kdump.txt for a example.
 
-	cs4232=		[HW,OSS]
-			Format: <io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>
-
 	cs89x0_dma=	[HW,NET]
 			Format: <dma>
 
@@ -732,10 +729,6 @@
 			Default value is 0.
 			Value can be changed at runtime via /selinux/enforce.
 
-	es1371=		[HW,OSS]
-			Format: <spdif>,[<nomix>,[<amplifier>]]
-			See also header of sound/oss/es1371.c.
-
 	ether=		[HW,NET] Ethernet cards parameters
 			This option is obsoleted by the "netdev=" option, which
 			has equivalent usage. See its documentation for details.
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index 898b498..41bc99f 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -1,7 +1,7 @@
 		     ThinkPad ACPI Extras Driver
 
-                            Version 0.21
-                           May 29th, 2008
+                            Version 0.22
+                        November 23rd,  2008
 
                Borislav Deianov <borislav@users.sf.net>
              Henrique de Moraes Holschuh <hmh@hmh.eng.br>
@@ -16,7 +16,8 @@
 This driver used to be named ibm-acpi until kernel 2.6.21 and release
 0.13-20070314.  It used to be in the drivers/acpi tree, but it was
 moved to the drivers/misc tree and renamed to thinkpad-acpi for kernel
-2.6.22, and release 0.14.
+2.6.22, and release 0.14.  It was moved to drivers/platform/x86 for
+kernel 2.6.29 and release 0.22.
 
 The driver is named "thinkpad-acpi".  In some places, like module
 names, "thinkpad_acpi" is used because of userspace issues.
@@ -1412,6 +1413,24 @@
 	rfkill controller switch "tpacpi_wwan_sw": refer to
 	Documentation/rfkill.txt for details.
 
+EXPERIMENTAL: UWB
+-----------------
+
+This feature is marked EXPERIMENTAL because it has not been extensively
+tested and validated in various ThinkPad models yet.  The feature may not
+work as expected. USE WITH CAUTION! To use this feature, you need to supply
+the experimental=1 parameter when loading the module.
+
+sysfs rfkill class: switch "tpacpi_uwb_sw"
+
+This feature exports an rfkill controller for the UWB device, if one is
+present and enabled in the BIOS.
+
+Sysfs notes:
+
+	rfkill controller switch "tpacpi_uwb_sw": refer to
+	Documentation/rfkill.txt for details.
+
 Multiple Commands, Module Parameters
 ------------------------------------
 
diff --git a/Documentation/mips/AU1xxx_IDE.README b/Documentation/mips/AU1xxx_IDE.README
index f54962a..8ace35e 100644
--- a/Documentation/mips/AU1xxx_IDE.README
+++ b/Documentation/mips/AU1xxx_IDE.README
@@ -52,14 +52,12 @@
   b) 'drivers/ide/mips/au1xxx-ide.c'
      contains the functionality of the AU1XXX IDE driver
 
-Four configs variables are introduced:
+Following extra configs variables are introduced:
 
   CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA    - enable the PIO+DBDMA mode
   CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA  - enable the MWDMA mode
   CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON - set Burstable FIFO in DBDMA
                                            controller
-  CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ - maximum transfer size
-                                           per descriptor
 
 
 SUPPORTED IDE MODES
@@ -87,7 +85,6 @@
 CONFIG_IDEDMA_PCI_AUTO=y
 CONFIG_BLK_DEV_IDE_AU1XXX=y
 CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
-CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
 CONFIG_BLK_DEV_IDEDMA=y
 CONFIG_IDEDMA_AUTO=y
 
@@ -105,7 +102,6 @@
 CONFIG_IDEDMA_PCI_AUTO=y
 CONFIG_BLK_DEV_IDE_AU1XXX=y
 CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
-CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
 CONFIG_BLK_DEV_IDEDMA=y
 CONFIG_IDEDMA_AUTO=y
 
diff --git a/Documentation/networking/netconsole.txt b/Documentation/networking/netconsole.txt
index 3c2f2b3..8d02207 100644
--- a/Documentation/networking/netconsole.txt
+++ b/Documentation/networking/netconsole.txt
@@ -51,7 +51,8 @@
 initialized and attempts to bring up the supplied dev at the supplied
 address.
 
-The remote host can run either 'netcat -u -l -p <port>' or syslogd.
+The remote host can run either 'netcat -u -l -p <port>',
+'nc -l -u <port>' or syslogd.
 
 Dynamic reconfiguration:
 ========================
diff --git a/Documentation/scheduler/sched-design-CFS.txt b/Documentation/scheduler/sched-design-CFS.txt
index 8398ca4..6f33593 100644
--- a/Documentation/scheduler/sched-design-CFS.txt
+++ b/Documentation/scheduler/sched-design-CFS.txt
@@ -231,7 +231,7 @@
 
    This options needs CONFIG_CGROUPS to be defined, and lets the administrator
    create arbitrary groups of tasks, using the "cgroup" pseudo filesystem.  See
-   Documentation/cgroups.txt for more information about this filesystem.
+   Documentation/cgroups/cgroups.txt for more information about this filesystem.
 
 Only one of these options to group tasks can be chosen and not both.
 
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 841a936..012afd7 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -757,6 +757,9 @@
     model	- force the model name
     position_fix - Fix DMA pointer (0 = auto, 1 = use LPIB, 2 = POSBUF)
     probe_mask  - Bitmask to probe codecs (default = -1, meaning all slots)
+    		  When the bit 8 (0x100) is set, the lower 8 bits are used
+		  as the "fixed" codec slots; i.e. the driver probes the
+		  slots regardless what hardware reports back
     probe_only	- Only probing and no codec initialization (default=off);
 		  Useful to check the initial codec status for debugging
     bdl_pos_adj	- Specifies the DMA IRQ timing delay in samples.
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index 0f5d26b..0e52d27 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -56,6 +56,7 @@
   sony-assamd	Sony ASSAMD
   toshiba-s06	Toshiba S06
   toshiba-rx1	Toshiba RX1
+  tyan		Tyan Thunder n6650W (S2915-E)
   ultra		Samsung Q1 Ultra Vista model
   lenovo-3000	Lenovo 3000 y410
   nec		NEC Versa S9100
@@ -261,6 +262,7 @@
 =============
   laptop	Basic Laptop config (default)
   hp		HP Spartan laptop
+  lenovo-x200	Lenovo X200 laptop
 
 STAC9200
 ========
@@ -285,6 +287,7 @@
   dell-m42	Dell (unknown)
   dell-m43	Dell Precision
   dell-m44	Dell Inspiron
+  eapd		Keep EAPD on (e.g. Gateway T1616)
 
 STAC9220/9221
 =============
@@ -353,5 +356,4 @@
 
 STAC9872
 ========
-  vaio		Setup for VAIO FE550G/SZ110
-  vaio-ar Setup for VAIO AR
+  N/A
diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt
index 8d68fff..99f7fbb 100644
--- a/Documentation/sound/alsa/HD-Audio.txt
+++ b/Documentation/sound/alsa/HD-Audio.txt
@@ -109,6 +109,13 @@
 Since 2.6.29 kernel, the driver has a more robust probing method, so
 this error might happen rarely, though.
 
+On a machine with a broken BIOS, sometimes you need to force the
+driver to probe the codec slots the hardware doesn't report for use.
+In such a case, turn the bit 8 (0x100) of `probe_mask` option on.
+Then the rest 8 bits are passed as the codec slots to probe
+unconditionally.  For example, `probe_mask=0x103` will force to probe
+the codec slots 0 and 1 no matter what the hardware reports.
+
 
 Interrupt Handling
 ~~~~~~~~~~~~~~~~~~
@@ -461,6 +468,16 @@
 There are some other useful options.  See `--help` option output for
 details.
 
+When a probe error occurs or when the driver obviously assigns a
+mismatched model, it'd be helpful to load the driver with
+`probe_only=1` option (at best after the cold reboot) and run
+alsa-info at this state.  With this option, the driver won't configure
+the mixer and PCM but just tries to probe the codec slot.  After
+probing, the proc file is available, so you can get the raw codec
+information before modified by the driver.  Of course, the driver
+isn't usable with `probe_only=1`.  But you can continue the
+configuration via hwdep sysfs file if hda-reconfig option is enabled.
+
 
 hda-verb
 ~~~~~~~~
diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
index a341507..3197fc8 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/sysctl/vm.txt
@@ -1,12 +1,13 @@
-Documentation for /proc/sys/vm/*	kernel version 2.2.10
+Documentation for /proc/sys/vm/*	kernel version 2.6.29
 	(c) 1998, 1999,  Rik van Riel <riel@nl.linux.org>
+	(c) 2008         Peter W. Morreale <pmorreale@novell.com>
 
 For general info and legal blurb, please look in README.
 
 ==============================================================
 
 This file contains the documentation for the sysctl files in
-/proc/sys/vm and is valid for Linux kernel version 2.2.
+/proc/sys/vm and is valid for Linux kernel version 2.6.29.
 
 The files in this directory can be used to tune the operation
 of the virtual memory (VM) subsystem of the Linux kernel and
@@ -16,83 +17,244 @@
 files can be found in mm/swap.c.
 
 Currently, these files are in /proc/sys/vm:
-- overcommit_memory
-- page-cluster
-- dirty_ratio
+
+- block_dump
+- dirty_background_bytes
 - dirty_background_ratio
+- dirty_bytes
 - dirty_expire_centisecs
+- dirty_ratio
 - dirty_writeback_centisecs
-- highmem_is_dirtyable   (only if CONFIG_HIGHMEM set)
+- drop_caches
+- hugepages_treat_as_movable
+- hugetlb_shm_group
+- laptop_mode
+- legacy_va_layout
+- lowmem_reserve_ratio
 - max_map_count
 - min_free_kbytes
-- laptop_mode
-- block_dump
-- drop-caches
-- zone_reclaim_mode
-- min_unmapped_ratio
 - min_slab_ratio
-- panic_on_oom
-- oom_dump_tasks
-- oom_kill_allocating_task
-- mmap_min_address
-- numa_zonelist_order
+- min_unmapped_ratio
+- mmap_min_addr
 - nr_hugepages
 - nr_overcommit_hugepages
-- nr_trim_pages		(only if CONFIG_MMU=n)
+- nr_pdflush_threads
+- nr_trim_pages         (only if CONFIG_MMU=n)
+- numa_zonelist_order
+- oom_dump_tasks
+- oom_kill_allocating_task
+- overcommit_memory
+- overcommit_ratio
+- page-cluster
+- panic_on_oom
+- percpu_pagelist_fraction
+- stat_interval
+- swappiness
+- vfs_cache_pressure
+- zone_reclaim_mode
+
 
 ==============================================================
 
-dirty_bytes, dirty_ratio, dirty_background_bytes,
-dirty_background_ratio, dirty_expire_centisecs,
-dirty_writeback_centisecs, highmem_is_dirtyable,
-vfs_cache_pressure, laptop_mode, block_dump, swap_token_timeout,
-drop-caches, hugepages_treat_as_movable:
+block_dump
 
-See Documentation/filesystems/proc.txt
+block_dump enables block I/O debugging when set to a nonzero value. More
+information on block I/O debugging is in Documentation/laptops/laptop-mode.txt.
 
 ==============================================================
 
-overcommit_memory:
+dirty_background_bytes
 
-This value contains a flag that enables memory overcommitment.
+Contains the amount of dirty memory at which the pdflush background writeback
+daemon will start writeback.
 
-When this flag is 0, the kernel attempts to estimate the amount
-of free memory left when userspace requests more memory.
-
-When this flag is 1, the kernel pretends there is always enough
-memory until it actually runs out.
-
-When this flag is 2, the kernel uses a "never overcommit"
-policy that attempts to prevent any overcommit of memory.  
-
-This feature can be very useful because there are a lot of
-programs that malloc() huge amounts of memory "just-in-case"
-and don't use much of it.
-
-The default value is 0.
-
-See Documentation/vm/overcommit-accounting and
-security/commoncap.c::cap_vm_enough_memory() for more information.
+If dirty_background_bytes is written, dirty_background_ratio becomes a function
+of its value (dirty_background_bytes / the amount of dirtyable system memory).
 
 ==============================================================
 
-overcommit_ratio:
+dirty_background_ratio
 
-When overcommit_memory is set to 2, the committed address
-space is not permitted to exceed swap plus this percentage
-of physical RAM.  See above.
+Contains, as a percentage of total system memory, the number of pages at which
+the pdflush background writeback daemon will start writing out dirty data.
 
 ==============================================================
 
-page-cluster:
+dirty_bytes
 
-The Linux VM subsystem avoids excessive disk seeks by reading
-multiple pages on a page fault. The number of pages it reads
-is dependent on the amount of memory in your machine.
+Contains the amount of dirty memory at which a process generating disk writes
+will itself start writeback.
 
-The number of pages the kernel reads in at once is equal to
-2 ^ page-cluster. Values above 2 ^ 5 don't make much sense
-for swap because we only cluster swap data in 32-page groups.
+If dirty_bytes is written, dirty_ratio becomes a function of its value
+(dirty_bytes / the amount of dirtyable system memory).
+
+==============================================================
+
+dirty_expire_centisecs
+
+This tunable is used to define when dirty data is old enough to be eligible
+for writeout by the pdflush daemons.  It is expressed in 100'ths of a second.
+Data which has been dirty in-memory for longer than this interval will be
+written out next time a pdflush daemon wakes up.
+
+==============================================================
+
+dirty_ratio
+
+Contains, as a percentage of total system memory, the number of pages at which
+a process which is generating disk writes will itself start writing out dirty
+data.
+
+==============================================================
+
+dirty_writeback_centisecs
+
+The pdflush writeback daemons will periodically wake up and write `old' data
+out to disk.  This tunable expresses the interval between those wakeups, in
+100'ths of a second.
+
+Setting this to zero disables periodic writeback altogether.
+
+==============================================================
+
+drop_caches
+
+Writing to this will cause the kernel to drop clean caches, dentries and
+inodes from memory, causing that memory to become free.
+
+To free pagecache:
+	echo 1 > /proc/sys/vm/drop_caches
+To free dentries and inodes:
+	echo 2 > /proc/sys/vm/drop_caches
+To free pagecache, dentries and inodes:
+	echo 3 > /proc/sys/vm/drop_caches
+
+As this is a non-destructive operation and dirty objects are not freeable, the
+user should run `sync' first.
+
+==============================================================
+
+hugepages_treat_as_movable
+
+This parameter is only useful when kernelcore= is specified at boot time to
+create ZONE_MOVABLE for pages that may be reclaimed or migrated. Huge pages
+are not movable so are not normally allocated from ZONE_MOVABLE. A non-zero
+value written to hugepages_treat_as_movable allows huge pages to be allocated
+from ZONE_MOVABLE.
+
+Once enabled, the ZONE_MOVABLE is treated as an area of memory the huge
+pages pool can easily grow or shrink within. Assuming that applications are
+not running that mlock() a lot of memory, it is likely the huge pages pool
+can grow to the size of ZONE_MOVABLE by repeatedly entering the desired value
+into nr_hugepages and triggering page reclaim.
+
+==============================================================
+
+hugetlb_shm_group
+
+hugetlb_shm_group contains group id that is allowed to create SysV
+shared memory segment using hugetlb page.
+
+==============================================================
+
+laptop_mode
+
+laptop_mode is a knob that controls "laptop mode". All the things that are
+controlled by this knob are discussed in Documentation/laptops/laptop-mode.txt.
+
+==============================================================
+
+legacy_va_layout
+
+If non-zero, this sysctl disables the new 32-bit mmap mmap layout - the kernel
+will use the legacy (2.4) layout for all processes.
+
+==============================================================
+
+lowmem_reserve_ratio
+
+For some specialised workloads on highmem machines it is dangerous for
+the kernel to allow process memory to be allocated from the "lowmem"
+zone.  This is because that memory could then be pinned via the mlock()
+system call, or by unavailability of swapspace.
+
+And on large highmem machines this lack of reclaimable lowmem memory
+can be fatal.
+
+So the Linux page allocator has a mechanism which prevents allocations
+which _could_ use highmem from using too much lowmem.  This means that
+a certain amount of lowmem is defended from the possibility of being
+captured into pinned user memory.
+
+(The same argument applies to the old 16 megabyte ISA DMA region.  This
+mechanism will also defend that region from allocations which could use
+highmem or lowmem).
+
+The `lowmem_reserve_ratio' tunable determines how aggressive the kernel is
+in defending these lower zones.
+
+If you have a machine which uses highmem or ISA DMA and your
+applications are using mlock(), or if you are running with no swap then
+you probably should change the lowmem_reserve_ratio setting.
+
+The lowmem_reserve_ratio is an array. You can see them by reading this file.
+-
+% cat /proc/sys/vm/lowmem_reserve_ratio
+256     256     32
+-
+Note: # of this elements is one fewer than number of zones. Because the highest
+      zone's value is not necessary for following calculation.
+
+But, these values are not used directly. The kernel calculates # of protection
+pages for each zones from them. These are shown as array of protection pages
+in /proc/zoneinfo like followings. (This is an example of x86-64 box).
+Each zone has an array of protection pages like this.
+
+-
+Node 0, zone      DMA
+  pages free     1355
+        min      3
+        low      3
+        high     4
+	:
+	:
+    numa_other   0
+        protection: (0, 2004, 2004, 2004)
+	^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+  pagesets
+    cpu: 0 pcp: 0
+        :
+-
+These protections are added to score to judge whether this zone should be used
+for page allocation or should be reclaimed.
+
+In this example, if normal pages (index=2) are required to this DMA zone and
+pages_high is used for watermark, the kernel judges this zone should not be
+used because pages_free(1355) is smaller than watermark + protection[2]
+(4 + 2004 = 2008). If this protection value is 0, this zone would be used for
+normal page requirement. If requirement is DMA zone(index=0), protection[0]
+(=0) is used.
+
+zone[i]'s protection[j] is calculated by following expression.
+
+(i < j):
+  zone[i]->protection[j]
+  = (total sums of present_pages from zone[i+1] to zone[j] on the node)
+    / lowmem_reserve_ratio[i];
+(i = j):
+   (should not be protected. = 0;
+(i > j):
+   (not necessary, but looks 0)
+
+The default values of lowmem_reserve_ratio[i] are
+    256 (if zone[i] means DMA or DMA32 zone)
+    32  (others).
+As above expression, they are reciprocal number of ratio.
+256 means 1/256. # of protection pages becomes about "0.39%" of total present
+pages of higher zones on the node.
+
+If you would like to protect more pages, smaller values are effective.
+The minimum value is 1 (1/1 -> 100%).
 
 ==============================================================
 
@@ -113,9 +275,9 @@
 
 min_free_kbytes:
 
-This is used to force the Linux VM to keep a minimum number 
+This is used to force the Linux VM to keep a minimum number
 of kilobytes free.  The VM uses this number to compute a pages_min
-value for each lowmem zone in the system.  Each lowmem zone gets 
+value for each lowmem zone in the system.  Each lowmem zone gets
 a number of reserved free pages based proportionally on its size.
 
 Some minimal amount of memory is needed to satisfy PF_MEMALLOC
@@ -124,73 +286,6 @@
 
 Setting this too high will OOM your machine instantly.
 
-==============================================================
-
-percpu_pagelist_fraction
-
-This is the fraction of pages at most (high mark pcp->high) in each zone that
-are allocated for each per cpu page list.  The min value for this is 8.  It
-means that we don't allow more than 1/8th of pages in each zone to be
-allocated in any single per_cpu_pagelist.  This entry only changes the value
-of hot per cpu pagelists.  User can specify a number like 100 to allocate
-1/100th of each zone to each per cpu page list.
-
-The batch value of each per cpu pagelist is also updated as a result.  It is
-set to pcp->high/4.  The upper limit of batch is (PAGE_SHIFT * 8)
-
-The initial value is zero.  Kernel does not use this value at boot time to set
-the high water marks for each per cpu page list.
-
-===============================================================
-
-zone_reclaim_mode:
-
-Zone_reclaim_mode allows someone to set more or less aggressive approaches to
-reclaim memory when a zone runs out of memory. If it is set to zero then no
-zone reclaim occurs. Allocations will be satisfied from other zones / nodes
-in the system.
-
-This is value ORed together of
-
-1	= Zone reclaim on
-2	= Zone reclaim writes dirty pages out
-4	= Zone reclaim swaps pages
-
-zone_reclaim_mode is set during bootup to 1 if it is determined that pages
-from remote zones will cause a measurable performance reduction. The
-page allocator will then reclaim easily reusable pages (those page
-cache pages that are currently not used) before allocating off node pages.
-
-It may be beneficial to switch off zone reclaim if the system is
-used for a file server and all of memory should be used for caching files
-from disk. In that case the caching effect is more important than
-data locality.
-
-Allowing zone reclaim to write out pages stops processes that are
-writing large amounts of data from dirtying pages on other nodes. Zone
-reclaim will write out dirty pages if a zone fills up and so effectively
-throttle the process. This may decrease the performance of a single process
-since it cannot use all of system memory to buffer the outgoing writes
-anymore but it preserve the memory on other nodes so that the performance
-of other processes running on other nodes will not be affected.
-
-Allowing regular swap effectively restricts allocations to the local
-node unless explicitly overridden by memory policies or cpuset
-configurations.
-
-=============================================================
-
-min_unmapped_ratio:
-
-This is available only on NUMA kernels.
-
-A percentage of the total pages in each zone.  Zone reclaim will only
-occur if more than this percentage of pages are file backed and unmapped.
-This is to insure that a minimal amount of local pages is still available for
-file I/O even if the node is overallocated.
-
-The default is 1 percent.
-
 =============================================================
 
 min_slab_ratio:
@@ -211,69 +306,16 @@
 
 =============================================================
 
-panic_on_oom
+min_unmapped_ratio:
 
-This enables or disables panic on out-of-memory feature.
+This is available only on NUMA kernels.
 
-If this is set to 0, the kernel will kill some rogue process,
-called oom_killer.  Usually, oom_killer can kill rogue processes and
-system will survive.
+A percentage of the total pages in each zone.  Zone reclaim will only
+occur if more than this percentage of pages are file backed and unmapped.
+This is to insure that a minimal amount of local pages is still available for
+file I/O even if the node is overallocated.
 
-If this is set to 1, the kernel panics when out-of-memory happens.
-However, if a process limits using nodes by mempolicy/cpusets,
-and those nodes become memory exhaustion status, one process
-may be killed by oom-killer. No panic occurs in this case.
-Because other nodes' memory may be free. This means system total status
-may be not fatal yet.
-
-If this is set to 2, the kernel panics compulsorily even on the
-above-mentioned.
-
-The default value is 0.
-1 and 2 are for failover of clustering. Please select either
-according to your policy of failover.
-
-=============================================================
-
-oom_dump_tasks
-
-Enables a system-wide task dump (excluding kernel threads) to be
-produced when the kernel performs an OOM-killing and includes such
-information as pid, uid, tgid, vm size, rss, cpu, oom_adj score, and
-name.  This is helpful to determine why the OOM killer was invoked
-and to identify the rogue task that caused it.
-
-If this is set to zero, this information is suppressed.  On very
-large systems with thousands of tasks it may not be feasible to dump
-the memory state information for each one.  Such systems should not
-be forced to incur a performance penalty in OOM conditions when the
-information may not be desired.
-
-If this is set to non-zero, this information is shown whenever the
-OOM killer actually kills a memory-hogging task.
-
-The default value is 0.
-
-=============================================================
-
-oom_kill_allocating_task
-
-This enables or disables killing the OOM-triggering task in
-out-of-memory situations.
-
-If this is set to zero, the OOM killer will scan through the entire
-tasklist and select a task based on heuristics to kill.  This normally
-selects a rogue memory-hogging task that frees up a large amount of
-memory when killed.
-
-If this is set to non-zero, the OOM killer simply kills the task that
-triggered the out-of-memory condition.  This avoids the expensive
-tasklist scan.
-
-If panic_on_oom is selected, it takes precedence over whatever value
-is used in oom_kill_allocating_task.
-
-The default value is 0.
+The default is 1 percent.
 
 ==============================================================
 
@@ -290,6 +332,50 @@
 
 ==============================================================
 
+nr_hugepages
+
+Change the minimum size of the hugepage pool.
+
+See Documentation/vm/hugetlbpage.txt
+
+==============================================================
+
+nr_overcommit_hugepages
+
+Change the maximum size of the hugepage pool. The maximum is
+nr_hugepages + nr_overcommit_hugepages.
+
+See Documentation/vm/hugetlbpage.txt
+
+==============================================================
+
+nr_pdflush_threads
+
+The current number of pdflush threads.  This value is read-only.
+The value changes according to the number of dirty pages in the system.
+
+When neccessary, additional pdflush threads are created, one per second, up to
+nr_pdflush_threads_max.
+
+==============================================================
+
+nr_trim_pages
+
+This is available only on NOMMU kernels.
+
+This value adjusts the excess page trimming behaviour of power-of-2 aligned
+NOMMU mmap allocations.
+
+A value of 0 disables trimming of allocations entirely, while a value of 1
+trims excess pages aggressively. Any value >= 1 acts as the watermark where
+trimming of allocations is initiated.
+
+The default value is 1.
+
+See Documentation/nommu-mmap.txt for more information.
+
+==============================================================
+
 numa_zonelist_order
 
 This sysctl is only for NUMA.
@@ -335,34 +421,199 @@
 
 ==============================================================
 
-nr_hugepages
+oom_dump_tasks
 
-Change the minimum size of the hugepage pool.
+Enables a system-wide task dump (excluding kernel threads) to be
+produced when the kernel performs an OOM-killing and includes such
+information as pid, uid, tgid, vm size, rss, cpu, oom_adj score, and
+name.  This is helpful to determine why the OOM killer was invoked
+and to identify the rogue task that caused it.
 
-See Documentation/vm/hugetlbpage.txt
+If this is set to zero, this information is suppressed.  On very
+large systems with thousands of tasks it may not be feasible to dump
+the memory state information for each one.  Such systems should not
+be forced to incur a performance penalty in OOM conditions when the
+information may not be desired.
+
+If this is set to non-zero, this information is shown whenever the
+OOM killer actually kills a memory-hogging task.
+
+The default value is 0.
 
 ==============================================================
 
-nr_overcommit_hugepages
+oom_kill_allocating_task
 
-Change the maximum size of the hugepage pool. The maximum is
-nr_hugepages + nr_overcommit_hugepages.
+This enables or disables killing the OOM-triggering task in
+out-of-memory situations.
 
-See Documentation/vm/hugetlbpage.txt
+If this is set to zero, the OOM killer will scan through the entire
+tasklist and select a task based on heuristics to kill.  This normally
+selects a rogue memory-hogging task that frees up a large amount of
+memory when killed.
+
+If this is set to non-zero, the OOM killer simply kills the task that
+triggered the out-of-memory condition.  This avoids the expensive
+tasklist scan.
+
+If panic_on_oom is selected, it takes precedence over whatever value
+is used in oom_kill_allocating_task.
+
+The default value is 0.
 
 ==============================================================
 
-nr_trim_pages
+overcommit_memory:
 
-This is available only on NOMMU kernels.
+This value contains a flag that enables memory overcommitment.
 
-This value adjusts the excess page trimming behaviour of power-of-2 aligned
-NOMMU mmap allocations.
+When this flag is 0, the kernel attempts to estimate the amount
+of free memory left when userspace requests more memory.
 
-A value of 0 disables trimming of allocations entirely, while a value of 1
-trims excess pages aggressively. Any value >= 1 acts as the watermark where
-trimming of allocations is initiated.
+When this flag is 1, the kernel pretends there is always enough
+memory until it actually runs out.
 
-The default value is 1.
+When this flag is 2, the kernel uses a "never overcommit"
+policy that attempts to prevent any overcommit of memory.
 
-See Documentation/nommu-mmap.txt for more information.
+This feature can be very useful because there are a lot of
+programs that malloc() huge amounts of memory "just-in-case"
+and don't use much of it.
+
+The default value is 0.
+
+See Documentation/vm/overcommit-accounting and
+security/commoncap.c::cap_vm_enough_memory() for more information.
+
+==============================================================
+
+overcommit_ratio:
+
+When overcommit_memory is set to 2, the committed address
+space is not permitted to exceed swap plus this percentage
+of physical RAM.  See above.
+
+==============================================================
+
+page-cluster
+
+page-cluster controls the number of pages which are written to swap in
+a single attempt.  The swap I/O size.
+
+It is a logarithmic value - setting it to zero means "1 page", setting
+it to 1 means "2 pages", setting it to 2 means "4 pages", etc.
+
+The default value is three (eight pages at a time).  There may be some
+small benefits in tuning this to a different value if your workload is
+swap-intensive.
+
+=============================================================
+
+panic_on_oom
+
+This enables or disables panic on out-of-memory feature.
+
+If this is set to 0, the kernel will kill some rogue process,
+called oom_killer.  Usually, oom_killer can kill rogue processes and
+system will survive.
+
+If this is set to 1, the kernel panics when out-of-memory happens.
+However, if a process limits using nodes by mempolicy/cpusets,
+and those nodes become memory exhaustion status, one process
+may be killed by oom-killer. No panic occurs in this case.
+Because other nodes' memory may be free. This means system total status
+may be not fatal yet.
+
+If this is set to 2, the kernel panics compulsorily even on the
+above-mentioned.
+
+The default value is 0.
+1 and 2 are for failover of clustering. Please select either
+according to your policy of failover.
+
+=============================================================
+
+percpu_pagelist_fraction
+
+This is the fraction of pages at most (high mark pcp->high) in each zone that
+are allocated for each per cpu page list.  The min value for this is 8.  It
+means that we don't allow more than 1/8th of pages in each zone to be
+allocated in any single per_cpu_pagelist.  This entry only changes the value
+of hot per cpu pagelists.  User can specify a number like 100 to allocate
+1/100th of each zone to each per cpu page list.
+
+The batch value of each per cpu pagelist is also updated as a result.  It is
+set to pcp->high/4.  The upper limit of batch is (PAGE_SHIFT * 8)
+
+The initial value is zero.  Kernel does not use this value at boot time to set
+the high water marks for each per cpu page list.
+
+==============================================================
+
+stat_interval
+
+The time interval between which vm statistics are updated.  The default
+is 1 second.
+
+==============================================================
+
+swappiness
+
+This control is used to define how aggressive the kernel will swap
+memory pages.  Higher values will increase agressiveness, lower values
+descrease the amount of swap.
+
+The default value is 60.
+
+==============================================================
+
+vfs_cache_pressure
+------------------
+
+Controls the tendency of the kernel to reclaim the memory which is used for
+caching of directory and inode objects.
+
+At the default value of vfs_cache_pressure=100 the kernel will attempt to
+reclaim dentries and inodes at a "fair" rate with respect to pagecache and
+swapcache reclaim.  Decreasing vfs_cache_pressure causes the kernel to prefer
+to retain dentry and inode caches.  Increasing vfs_cache_pressure beyond 100
+causes the kernel to prefer to reclaim dentries and inodes.
+
+==============================================================
+
+zone_reclaim_mode:
+
+Zone_reclaim_mode allows someone to set more or less aggressive approaches to
+reclaim memory when a zone runs out of memory. If it is set to zero then no
+zone reclaim occurs. Allocations will be satisfied from other zones / nodes
+in the system.
+
+This is value ORed together of
+
+1	= Zone reclaim on
+2	= Zone reclaim writes dirty pages out
+4	= Zone reclaim swaps pages
+
+zone_reclaim_mode is set during bootup to 1 if it is determined that pages
+from remote zones will cause a measurable performance reduction. The
+page allocator will then reclaim easily reusable pages (those page
+cache pages that are currently not used) before allocating off node pages.
+
+It may be beneficial to switch off zone reclaim if the system is
+used for a file server and all of memory should be used for caching files
+from disk. In that case the caching effect is more important than
+data locality.
+
+Allowing zone reclaim to write out pages stops processes that are
+writing large amounts of data from dirtying pages on other nodes. Zone
+reclaim will write out dirty pages if a zone fills up and so effectively
+throttle the process. This may decrease the performance of a single process
+since it cannot use all of system memory to buffer the outgoing writes
+anymore but it preserve the memory on other nodes so that the performance
+of other processes running on other nodes will not be affected.
+
+Allowing regular swap effectively restricts allocations to the local
+node unless explicitly overridden by memory policies or cpuset
+configurations.
+
+============ End of Document =================================
diff --git a/Documentation/sysrq.txt b/Documentation/sysrq.txt
index 10a0263..9e592c7 100644
--- a/Documentation/sysrq.txt
+++ b/Documentation/sysrq.txt
@@ -1,6 +1,5 @@
 Linux Magic System Request Key Hacks
 Documentation for sysrq.c
-Last update: 2007-AUG-04
 
 *  What is the magic SysRq key?
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -211,6 +210,24 @@
 a lock (you are also in an interrupt handler, which means don't sleep!), so
 you must call __handle_sysrq_nolock instead.
 
+*  When I hit a SysRq key combination only the header appears on the console?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Sysrq output is subject to the same console loglevel control as all
+other console output.  This means that if the kernel was booted 'quiet'
+as is common on distro kernels the output may not appear on the actual
+console, even though it will appear in the dmesg buffer, and be accessible
+via the dmesg command and to the consumers of /proc/kmsg.  As a specific
+exception the header line from the sysrq command is passed to all console
+consumers as if the current loglevel was maximum.  If only the header
+is emitted it is almost certain that the kernel loglevel is too low.
+Should you require the output on the console channel then you will need
+to temporarily up the console loglevel using alt-sysrq-8 or:
+
+    echo 8 > /proc/sysrq-trigger
+
+Remember to return the loglevel to normal after triggering the sysrq
+command you are interested in.
+
 *  I have more questions, who can I ask?
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 And I'll answer any questions about the registration system you got, also
diff --git a/MAINTAINERS b/MAINTAINERS
index 6f65a26..d992d40 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1581,6 +1581,13 @@
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 
+EDAC-I5400
+P:	Mauro Carvalho Chehab
+M:	mchehab@redhat.com
+L:	bluesmoke-devel@lists.sourceforge.net
+W:	bluesmoke.sourceforge.net
+S:	Maintained
+
 EDAC-I82975X
 P:	Ranganathan Desikan
 P:	Arvind R.
@@ -1814,6 +1821,14 @@
 W:	ftp://ftp.openlinux.org/pub/people/hch/vxfs
 S:	Maintained
 
+FREEZER
+P:	Pavel Machek
+M:	pavel@suse.cz
+P:	Rafael J. Wysocki
+M:	rjw@sisk.pl
+L:	linux-pm@lists.linux-foundation.org
+S:	Supported
+
 FTRACE
 P:	Steven Rostedt
 M:	rostedt@goodmis.org
@@ -2087,7 +2102,8 @@
 P:	Ben Dooks (embedded platforms)
 M:	ben-linux@fluff.org
 L:	linux-i2c@vger.kernel.org
-T:	quilt http://khali.linux-fr.org/devel/linux-2.6/jdelvare-i2c/
+W:	http://i2c.wiki.kernel.org/
+T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
 S:	Maintained
 
 I2C-TINY-USB DRIVER
@@ -4842,11 +4858,11 @@
 
 XFS FILESYSTEM
 P:	Silicon Graphics Inc
-P:	Tim Shimmin
+P:	Bill O'Donnell
 M:	xfs-masters@oss.sgi.com
 L:	xfs@oss.sgi.com
 W:	http://oss.sgi.com/projects/xfs
-T:	git git://oss.sgi.com:8090/xfs/xfs-2.6.git
+T:	git://oss.sgi.com/xfs/xfs.git
 S:	Supported
 
 XILINX SYSTEMACE DRIVER
diff --git a/Makefile b/Makefile
index c06e250..7715b2c 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 29
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc3
 NAME = Erotic Pickled Herring
 
 # *DOCUMENTATION*
@@ -213,6 +213,10 @@
 # Where to locate arch specific headers
 hdr-arch  := $(SRCARCH)
 
+ifeq ($(ARCH),m68knommu)
+       hdr-arch  := m68k
+endif
+
 KCONFIG_CONFIG	?= .config
 
 # SHELL used by kbuild
@@ -606,25 +610,20 @@
 MODLIB	= $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
 export MODLIB
 
-strip-symbols := $(srctree)/scripts/strip-symbols \
-		 $(wildcard $(srctree)/arch/$(ARCH)/scripts/strip-symbols)
-
 #
-# INSTALL_MOD_STRIP, if defined, will cause modules to be stripped while
-# they get installed.  If INSTALL_MOD_STRIP is '1', then the default
-# options (see below) will be used.  Otherwise, INSTALL_MOD_STRIP will
-# be used as the option(s) to the objcopy command.
+#  INSTALL_MOD_STRIP, if defined, will cause modules to be
+#  stripped after they are installed.  If INSTALL_MOD_STRIP is '1', then
+#  the default option --strip-debug will be used.  Otherwise,
+#  INSTALL_MOD_STRIP will used as the options to the strip command.
+
 ifdef INSTALL_MOD_STRIP
 ifeq ($(INSTALL_MOD_STRIP),1)
-mod_strip_cmd = $(OBJCOPY) --strip-debug
-ifeq ($(CONFIG_KALLSYMS_ALL),$(CONFIG_KALLSYMS_STRIP_GENERATED))
-mod_strip_cmd += --wildcard $(addprefix --strip-symbols ,$(strip-symbols))
-endif
+mod_strip_cmd = $(STRIP) --strip-debug
 else
-mod_strip_cmd = $(OBJCOPY) $(INSTALL_MOD_STRIP)
+mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP)
 endif # INSTALL_MOD_STRIP=1
 else
-mod_strip_cmd = false
+mod_strip_cmd = true
 endif # INSTALL_MOD_STRIP
 export mod_strip_cmd
 
@@ -754,7 +753,6 @@
 endif
 
 kallsyms.o := .tmp_kallsyms$(last_kallsyms).o
-kallsyms.h := $(wildcard include/config/kallsyms/*.h) $(wildcard include/config/kallsyms/*/*.h)
 
 define verify_kallsyms
 	$(Q)$(if $($(quiet)cmd_sysmap),                                      \
@@ -779,41 +777,24 @@
 
 # Generate .S file with all kernel symbols
 quiet_cmd_kallsyms = KSYM    $@
-      cmd_kallsyms = { test $* -eq 0 || $(NM) -n $<; } \
-		     | $(KALLSYMS) $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) >$@
+      cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) \
+                     $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) > $@
 
-quiet_cmd_kstrip = STRIP   $@
-      cmd_kstrip = $(OBJCOPY) --wildcard $(addprefix --strip$(if $(CONFIG_RELOCATABLE),-unneeded)-symbols ,$(filter %/scripts/strip-symbols,$^)) $< $@
-
-$(foreach n,0 1 2 3,.tmp_kallsyms$(n).o): KBUILD_AFLAGS += -Wa,--strip-local-absolute
-$(foreach n,0 1 2 3,.tmp_kallsyms$(n).o): %.o: %.S scripts FORCE
+.tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE
 	$(call if_changed_dep,as_o_S)
 
-ifeq ($(CONFIG_KALLSYMS_STRIP_GENERATED),y)
-strip-ext := .stripped
-endif
-
-.tmp_kallsyms%.S: .tmp_vmlinux%$(strip-ext) $(KALLSYMS) $(kallsyms.h)
+.tmp_kallsyms%.S: .tmp_vmlinux% $(KALLSYMS)
 	$(call cmd,kallsyms)
 
-# make -jN seems to have problems with intermediate files, see bug #3330.
-.SECONDARY: $(foreach n,1 2 3,.tmp_vmlinux$(n).stripped)
-.tmp_vmlinux%.stripped: .tmp_vmlinux% $(strip-symbols) $(kallsyms.h)
-	$(call cmd,kstrip)
-
-ifneq ($(CONFIG_DEBUG_INFO),y)
-.tmp_vmlinux%: LDFLAGS_vmlinux += -S
-endif
 # .tmp_vmlinux1 must be complete except kallsyms, so update vmlinux version
-.tmp_vmlinux%: $(vmlinux-lds) $(vmlinux-all) FORCE
-	$(if $(filter 1,$*),$(call if_changed_rule,ksym_ld),$(call if_changed,vmlinux__))
+.tmp_vmlinux1: $(vmlinux-lds) $(vmlinux-all) FORCE
+	$(call if_changed_rule,ksym_ld)
 
-.tmp_vmlinux0$(strip-ext):
-	$(Q)echo "placeholder" >$@
+.tmp_vmlinux2: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms1.o FORCE
+	$(call if_changed,vmlinux__)
 
-.tmp_vmlinux1: .tmp_kallsyms0.o
-.tmp_vmlinux2: .tmp_kallsyms1.o
-.tmp_vmlinux3: .tmp_kallsyms2.o
+.tmp_vmlinux3: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms2.o FORCE
+	$(call if_changed,vmlinux__)
 
 # Needs to visit scripts/ before $(KALLSYMS) can be used.
 $(KALLSYMS): scripts ;
diff --git a/arch/Kconfig b/arch/Kconfig
index 2e13aa2..550dab2 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -62,6 +62,9 @@
 	  See Documentation/unaligned-memory-access.txt for more
 	  information on the topic of unaligned memory accesses.
 
+config HAVE_SYSCALL_WRAPPERS
+	bool
+
 config KRETPROBES
 	def_bool y
 	depends on KPROBES && HAVE_KRETPROBES
diff --git a/arch/alpha/include/asm/Kbuild b/arch/alpha/include/asm/Kbuild
index 4dad273..b7c8f18 100644
--- a/arch/alpha/include/asm/Kbuild
+++ b/arch/alpha/include/asm/Kbuild
@@ -9,4 +9,3 @@
 unifdef-y += fpu.h
 unifdef-y += sysinfo.h
 unifdef-y += compiler.h
-unifdef-y += swab.h
diff --git a/arch/alpha/include/asm/byteorder.h b/arch/alpha/include/asm/byteorder.h
index 6772f31..7368309 100644
--- a/arch/alpha/include/asm/byteorder.h
+++ b/arch/alpha/include/asm/byteorder.h
@@ -1,7 +1,6 @@
 #ifndef _ALPHA_BYTEORDER_H
 #define _ALPHA_BYTEORDER_H
 
-#include <asm/swab.h>
 #include <linux/byteorder/little_endian.h>
 
 #endif /* _ALPHA_BYTEORDER_H */
diff --git a/arch/alpha/include/asm/machvec.h b/arch/alpha/include/asm/machvec.h
index a86c083..fea4ea7 100644
--- a/arch/alpha/include/asm/machvec.h
+++ b/arch/alpha/include/asm/machvec.h
@@ -21,6 +21,7 @@
 struct pci_ops;
 struct pci_controller;
 struct _alpha_agp_info;
+struct rtc_time;
 
 struct alpha_machine_vector
 {
@@ -94,6 +95,9 @@
 
 	struct _alpha_agp_info *(*agp_info)(void);
 
+	unsigned int (*rtc_get_time)(struct rtc_time *);
+	int (*rtc_set_time)(struct rtc_time *);
+
 	const char *vector_name;
 
 	/* NUMA information */
diff --git a/arch/alpha/include/asm/pgalloc.h b/arch/alpha/include/asm/pgalloc.h
index fd09015..bc2a0da 100644
--- a/arch/alpha/include/asm/pgalloc.h
+++ b/arch/alpha/include/asm/pgalloc.h
@@ -50,7 +50,12 @@
 	free_page((unsigned long)pmd);
 }
 
-extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr);
+static inline pte_t *
+pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
+{
+	pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+	return pte;
+}
 
 static inline void
 pte_free_kernel(struct mm_struct *mm, pte_t *pte)
diff --git a/arch/alpha/include/asm/rtc.h b/arch/alpha/include/asm/rtc.h
index 4e854b1..1f7fba6 100644
--- a/arch/alpha/include/asm/rtc.h
+++ b/arch/alpha/include/asm/rtc.h
@@ -1,9 +1,15 @@
 #ifndef _ALPHA_RTC_H
 #define _ALPHA_RTC_H
 
-/*
- * Alpha uses the default access methods for the RTC.
- */
+#if defined(CONFIG_ALPHA_GENERIC)
+# define get_rtc_time		alpha_mv.rtc_get_time
+# define set_rtc_time		alpha_mv.rtc_set_time
+#else
+# if defined(CONFIG_ALPHA_MARVEL) && defined(CONFIG_SMP)
+#  define get_rtc_time		marvel_get_rtc_time
+#  define set_rtc_time		marvel_set_rtc_time
+# endif
+#endif
 
 #include <asm-generic/rtc.h>
 
diff --git a/arch/alpha/kernel/.gitignore b/arch/alpha/kernel/.gitignore
new file mode 100644
index 0000000..c5f676c
--- /dev/null
+++ b/arch/alpha/kernel/.gitignore
@@ -0,0 +1 @@
+vmlinux.lds
diff --git a/arch/alpha/kernel/core_marvel.c b/arch/alpha/kernel/core_marvel.c
index 9cd8dca..e302dae 100644
--- a/arch/alpha/kernel/core_marvel.c
+++ b/arch/alpha/kernel/core_marvel.c
@@ -658,16 +658,8 @@
 		rtc_access.data = bcd2bin(b);
 		rtc_access.function = 0x48 + !write;	/* GET/PUT_TOY */
 
-#ifdef CONFIG_SMP
-		if (smp_processor_id() != boot_cpuid)
-			smp_call_function_single(boot_cpuid,
-						 __marvel_access_rtc,
-						 &rtc_access, 1);
-		else
-			__marvel_access_rtc(&rtc_access);
-#else
 		__marvel_access_rtc(&rtc_access);
-#endif
+
 		ret = bin2bcd(rtc_access.data);
 		break;
 
diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S
index f77345b..aa2e50c 100644
--- a/arch/alpha/kernel/entry.S
+++ b/arch/alpha/kernel/entry.S
@@ -896,9 +896,9 @@
 .end sys_getxpid
 
 	.align	4
-	.globl	sys_pipe
-	.ent	sys_pipe
-sys_pipe:
+	.globl	sys_alpha_pipe
+	.ent	sys_alpha_pipe
+sys_alpha_pipe:
 	lda	$sp, -16($sp)
 	stq	$26, 0($sp)
 	.prologue 0
@@ -916,7 +916,7 @@
 	stq	$1, 80+16($sp)
 1:	lda	$sp, 16($sp)
 	ret
-.end sys_pipe
+.end sys_alpha_pipe
 
 	.align	4
 	.globl	sys_execve
diff --git a/arch/alpha/kernel/irq_srm.c b/arch/alpha/kernel/irq_srm.c
index 3221201..a03fbca 100644
--- a/arch/alpha/kernel/irq_srm.c
+++ b/arch/alpha/kernel/irq_srm.c
@@ -63,6 +63,8 @@
 {
 	long i;
 
+	if (NR_IRQS <= 16)
+		return;
 	for (i = 16; i < max; ++i) {
 		if (i < 64 && ((ignore_mask >> i) & 1))
 			continue;
diff --git a/arch/alpha/kernel/machvec_impl.h b/arch/alpha/kernel/machvec_impl.h
index 466c9df..512685f 100644
--- a/arch/alpha/kernel/machvec_impl.h
+++ b/arch/alpha/kernel/machvec_impl.h
@@ -40,7 +40,10 @@
 #define CAT1(x,y)  x##y
 #define CAT(x,y)   CAT1(x,y)
 
-#define DO_DEFAULT_RTC .rtc_port = 0x70
+#define DO_DEFAULT_RTC \
+	.rtc_port = 0x70, \
+	.rtc_get_time = common_get_rtc_time, \
+	.rtc_set_time = common_set_rtc_time
 
 #define DO_EV4_MMU							\
 	.max_asn =			EV4_MAX_ASN,			\
diff --git a/arch/alpha/kernel/proto.h b/arch/alpha/kernel/proto.h
index 708d5ca..fe14c674 100644
--- a/arch/alpha/kernel/proto.h
+++ b/arch/alpha/kernel/proto.h
@@ -145,6 +145,8 @@
 extern irqreturn_t timer_interrupt(int irq, void *dev);
 extern void common_init_rtc(void);
 extern unsigned long est_cycle_freq;
+extern unsigned int common_get_rtc_time(struct rtc_time *time);
+extern int common_set_rtc_time(struct rtc_time *time);
 
 /* smc37c93x.c */
 extern void SMC93x_Init(void);
diff --git a/arch/alpha/kernel/sys_jensen.c b/arch/alpha/kernel/sys_jensen.c
index 2c3de97..e2516f9 100644
--- a/arch/alpha/kernel/sys_jensen.c
+++ b/arch/alpha/kernel/sys_jensen.c
@@ -261,6 +261,8 @@
 	.machine_check		= jensen_machine_check,
 	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
 	.rtc_port		= 0x170,
+	.rtc_get_time		= common_get_rtc_time,
+	.rtc_set_time		= common_set_rtc_time,
 
 	.nr_irqs		= 16,
 	.device_interrupt	= jensen_device_interrupt,
diff --git a/arch/alpha/kernel/sys_marvel.c b/arch/alpha/kernel/sys_marvel.c
index 828449c..c5a1a24 100644
--- a/arch/alpha/kernel/sys_marvel.c
+++ b/arch/alpha/kernel/sys_marvel.c
@@ -23,6 +23,7 @@
 #include <asm/hwrpb.h>
 #include <asm/tlbflush.h>
 #include <asm/vga.h>
+#include <asm/rtc.h>
 
 #include "proto.h"
 #include "err_impl.h"
@@ -426,6 +427,57 @@
 	init_rtc_irq();
 }
 
+struct marvel_rtc_time {
+	struct rtc_time *time;
+	int retval;
+};
+
+#ifdef CONFIG_SMP
+static void
+smp_get_rtc_time(void *data)
+{
+	struct marvel_rtc_time *mrt = data;
+	mrt->retval = __get_rtc_time(mrt->time);
+}
+
+static void
+smp_set_rtc_time(void *data)
+{
+	struct marvel_rtc_time *mrt = data;
+	mrt->retval = __set_rtc_time(mrt->time);
+}
+#endif
+
+static unsigned int
+marvel_get_rtc_time(struct rtc_time *time)
+{
+#ifdef CONFIG_SMP
+	struct marvel_rtc_time mrt;
+
+	if (smp_processor_id() != boot_cpuid) {
+		mrt.time = time;
+		smp_call_function_single(boot_cpuid, smp_get_rtc_time, &mrt, 1);
+		return mrt.retval;
+	}
+#endif
+	return __get_rtc_time(time);
+}
+
+static int
+marvel_set_rtc_time(struct rtc_time *time)
+{
+#ifdef CONFIG_SMP
+	struct marvel_rtc_time mrt;
+
+	if (smp_processor_id() != boot_cpuid) {
+		mrt.time = time;
+		smp_call_function_single(boot_cpuid, smp_set_rtc_time, &mrt, 1);
+		return mrt.retval;
+	}
+#endif
+	return __set_rtc_time(time);
+}
+
 static void
 marvel_smp_callin(void)
 {
@@ -466,7 +518,9 @@
 struct alpha_machine_vector marvel_ev7_mv __initmv = {
 	.vector_name		= "MARVEL/EV7",
 	DO_EV7_MMU,
-	DO_DEFAULT_RTC,
+	.rtc_port		= 0x70,
+	.rtc_get_time		= marvel_get_rtc_time,
+	.rtc_set_time		= marvel_set_rtc_time,
 	DO_MARVEL_IO,
 	.machine_check		= marvel_machine_check,
 	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
diff --git a/arch/alpha/kernel/sys_nautilus.c b/arch/alpha/kernel/sys_nautilus.c
index a7f23b5..99c0f46 100644
--- a/arch/alpha/kernel/sys_nautilus.c
+++ b/arch/alpha/kernel/sys_nautilus.c
@@ -245,6 +245,10 @@
 		IRONGATE0->pci_mem = pci_mem;
 
 	pci_bus_assign_resources(bus);
+
+	/* pci_common_swizzle() relies on bus->self being NULL
+	   for the root bus, so just clear it. */
+	bus->self = NULL;
 	pci_fixup_irqs(alpha_mv.pci_swizzle, alpha_mv.pci_map_irq);
 }
 
diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S
index ba914af..9d9e3a9 100644
--- a/arch/alpha/kernel/systbls.S
+++ b/arch/alpha/kernel/systbls.S
@@ -52,7 +52,7 @@
 	.quad sys_setpgid
 	.quad alpha_ni_syscall			/* 40 */
 	.quad sys_dup
-	.quad sys_pipe
+	.quad sys_alpha_pipe
 	.quad osf_set_program_attributes
 	.quad alpha_ni_syscall
 	.quad sys_open				/* 45 */
diff --git a/arch/alpha/kernel/time.c b/arch/alpha/kernel/time.c
index e6a2314..b04e2cb 100644
--- a/arch/alpha/kernel/time.c
+++ b/arch/alpha/kernel/time.c
@@ -46,6 +46,7 @@
 #include <asm/io.h>
 #include <asm/hwrpb.h>
 #include <asm/8253pit.h>
+#include <asm/rtc.h>
 
 #include <linux/mc146818rtc.h>
 #include <linux/time.h>
@@ -180,6 +181,15 @@
 	init_rtc_irq();
 }
 
+unsigned int common_get_rtc_time(struct rtc_time *time)
+{
+	return __get_rtc_time(time);
+}
+
+int common_set_rtc_time(struct rtc_time *time)
+{
+	return __set_rtc_time(time);
+}
 
 /* Validate a computed cycle counter result against the known bounds for
    the given processor core.  There's too much brokenness in the way of
diff --git a/arch/alpha/mm/init.c b/arch/alpha/mm/init.c
index 234e42b..5d7a16e 100644
--- a/arch/alpha/mm/init.c
+++ b/arch/alpha/mm/init.c
@@ -59,13 +59,6 @@
 	return ret;
 }
 
-pte_t *
-pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
-{
-	pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
-	return pte;
-}
-
 
 /*
  * BAD_PAGE is the page that is used for page faults when linux
diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c
index 17a17b4..1037bba 100644
--- a/arch/arm/common/clkdev.c
+++ b/arch/arm/common/clkdev.c
@@ -24,6 +24,15 @@
 static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
 
+/*
+ * Find the correct struct clk for the device and connection ID.
+ * We do slightly fuzzy matching here:
+ *  An entry with a NULL ID is assumed to be a wildcard.
+ *  If an entry has a device ID, it must match
+ *  If an entry has a connection ID, it must match
+ * Then we take the most specific entry - with the following
+ * order of precidence: dev+con > dev only > con only.
+ */
 static struct clk *clk_find(const char *dev_id, const char *con_id)
 {
 	struct clk_lookup *p;
@@ -31,13 +40,17 @@
 	int match, best = 0;
 
 	list_for_each_entry(p, &clocks, node) {
-		if ((p->dev_id && !dev_id) || (p->con_id && !con_id))
-			continue;
 		match = 0;
-		if (p->dev_id)
-			match += 2 * (strcmp(p->dev_id, dev_id) == 0);
-		if (p->con_id)
-			match += 1 * (strcmp(p->con_id, con_id) == 0);
+		if (p->dev_id) {
+			if (!dev_id || strcmp(p->dev_id, dev_id))
+				continue;
+			match += 2;
+		}
+		if (p->con_id) {
+			if (!con_id || strcmp(p->con_id, con_id))
+				continue;
+			match += 1;
+		}
 		if (match == 0)
 			continue;
 
diff --git a/arch/arm/configs/afeb9260_defconfig b/arch/arm/configs/afeb9260_defconfig
index ce90958..f7a272c 100644
--- a/arch/arm/configs/afeb9260_defconfig
+++ b/arch/arm/configs/afeb9260_defconfig
@@ -719,8 +719,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_AT24=y
-# CONFIG_SENSORS_EEPROM is not set
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -744,7 +744,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=y
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/ams_delta_defconfig b/arch/arm/configs/ams_delta_defconfig
index 2c4aa11..7647325 100644
--- a/arch/arm/configs/ams_delta_defconfig
+++ b/arch/arm/configs/ams_delta_defconfig
@@ -767,7 +767,7 @@
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig
index bf97801..bc6bd9f 100644
--- a/arch/arm/configs/at91cap9adk_defconfig
+++ b/arch/arm/configs/at91cap9adk_defconfig
@@ -676,7 +676,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -703,7 +703,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig
index 868fb7b..238b218 100644
--- a/arch/arm/configs/at91rm9200dk_defconfig
+++ b/arch/arm/configs/at91rm9200dk_defconfig
@@ -636,7 +636,7 @@
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig
index de43fc6..9f7a99a 100644
--- a/arch/arm/configs/at91rm9200ek_defconfig
+++ b/arch/arm/configs/at91rm9200ek_defconfig
@@ -610,7 +610,7 @@
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig
index 38e6a0a..e0ee706 100644
--- a/arch/arm/configs/at91sam9260ek_defconfig
+++ b/arch/arm/configs/at91sam9260ek_defconfig
@@ -582,7 +582,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig
index 93b779f..01d1ef9 100644
--- a/arch/arm/configs/at91sam9261ek_defconfig
+++ b/arch/arm/configs/at91sam9261ek_defconfig
@@ -660,7 +660,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -687,7 +687,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig
index a7ddd94..036a126 100644
--- a/arch/arm/configs/at91sam9263ek_defconfig
+++ b/arch/arm/configs/at91sam9263ek_defconfig
@@ -670,7 +670,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -697,7 +697,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/at91sam9g20ek_defconfig b/arch/arm/configs/at91sam9g20ek_defconfig
index df0d6ee..7e018a0 100644
--- a/arch/arm/configs/at91sam9g20ek_defconfig
+++ b/arch/arm/configs/at91sam9g20ek_defconfig
@@ -665,7 +665,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=y
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig
index 811bebb..237a2a6 100644
--- a/arch/arm/configs/at91sam9rlek_defconfig
+++ b/arch/arm/configs/at91sam9rlek_defconfig
@@ -566,7 +566,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -593,7 +593,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig
index 85c80f7..a19e824 100644
--- a/arch/arm/configs/ateb9200_defconfig
+++ b/arch/arm/configs/ateb9200_defconfig
@@ -723,7 +723,7 @@
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig
index b2bbf21..80222fe 100644
--- a/arch/arm/configs/badge4_defconfig
+++ b/arch/arm/configs/badge4_defconfig
@@ -750,7 +750,7 @@
 # Other I2C Chip support
 #
 # CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
diff --git a/arch/arm/configs/cam60_defconfig b/arch/arm/configs/cam60_defconfig
index f945105..8448108 100644
--- a/arch/arm/configs/cam60_defconfig
+++ b/arch/arm/configs/cam60_defconfig
@@ -722,7 +722,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -749,7 +749,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig
index 46f1c9d..227da08 100644
--- a/arch/arm/configs/cm_x300_defconfig
+++ b/arch/arm/configs/cm_x300_defconfig
@@ -763,8 +763,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/colibri_defconfig b/arch/arm/configs/colibri_defconfig
index c3e3418..744086f 100644
--- a/arch/arm/configs/colibri_defconfig
+++ b/arch/arm/configs/colibri_defconfig
@@ -801,7 +801,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig
index 9876543..d6cd165 100644
--- a/arch/arm/configs/corgi_defconfig
+++ b/arch/arm/configs/corgi_defconfig
@@ -982,8 +982,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -1008,7 +1008,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig
index 67e65e4..29f68c2 100644
--- a/arch/arm/configs/csb337_defconfig
+++ b/arch/arm/configs/csb337_defconfig
@@ -679,7 +679,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig
index 9970214..f7b60ce 100644
--- a/arch/arm/configs/csb637_defconfig
+++ b/arch/arm/configs/csb637_defconfig
@@ -704,7 +704,7 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/ecbat91_defconfig b/arch/arm/configs/ecbat91_defconfig
index cfeb817..ca52073 100644
--- a/arch/arm/configs/ecbat91_defconfig
+++ b/arch/arm/configs/ecbat91_defconfig
@@ -721,7 +721,7 @@
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -747,7 +747,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 
 #
diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig
index 21aa013..3f89d5f 100644
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -681,7 +681,7 @@
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig
index 2a84d55..d5ee16e 100644
--- a/arch/arm/configs/ezx_defconfig
+++ b/arch/arm/configs/ezx_defconfig
@@ -877,7 +877,7 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -900,7 +900,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_HAVE_GPIO_LIB=y
diff --git a/arch/arm/configs/footbridge_defconfig b/arch/arm/configs/footbridge_defconfig
index 299dc22..6ace512 100644
--- a/arch/arm/configs/footbridge_defconfig
+++ b/arch/arm/configs/footbridge_defconfig
@@ -801,7 +801,7 @@
 #
 # Other I2C Chip support
 #
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
diff --git a/arch/arm/configs/iop13xx_defconfig b/arch/arm/configs/iop13xx_defconfig
index 482e570..89c1776 100644
--- a/arch/arm/configs/iop13xx_defconfig
+++ b/arch/arm/configs/iop13xx_defconfig
@@ -744,7 +744,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig
index 8612f58..d70177b 100644
--- a/arch/arm/configs/iop32x_defconfig
+++ b/arch/arm/configs/iop32x_defconfig
@@ -847,7 +847,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig
index 8b0098d..eec4882 100644
--- a/arch/arm/configs/iop33x_defconfig
+++ b/arch/arm/configs/iop33x_defconfig
@@ -746,7 +746,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/ixp2000_defconfig b/arch/arm/configs/ixp2000_defconfig
index 84680db..57526c1 100644
--- a/arch/arm/configs/ixp2000_defconfig
+++ b/arch/arm/configs/ixp2000_defconfig
@@ -768,7 +768,7 @@
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/ixp23xx_defconfig b/arch/arm/configs/ixp23xx_defconfig
index 4a2f7b2..ef97561 100644
--- a/arch/arm/configs/ixp23xx_defconfig
+++ b/arch/arm/configs/ixp23xx_defconfig
@@ -900,7 +900,7 @@
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig
index fc14932e..95cd8df 100644
--- a/arch/arm/configs/ixp4xx_defconfig
+++ b/arch/arm/configs/ixp4xx_defconfig
@@ -1083,7 +1083,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-CONFIG_SENSORS_EEPROM=y
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig
index 6dd95a2..9f92fc5 100644
--- a/arch/arm/configs/kafa_defconfig
+++ b/arch/arm/configs/kafa_defconfig
@@ -603,7 +603,7 @@
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index ab8b1e0..4bc3807 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -905,8 +905,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -930,7 +930,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/loki_defconfig b/arch/arm/configs/loki_defconfig
index 17da7c3..b720fcf 100644
--- a/arch/arm/configs/loki_defconfig
+++ b/arch/arm/configs/loki_defconfig
@@ -654,7 +654,7 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -675,7 +675,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
index 4d11678..73ba62b 100644
--- a/arch/arm/configs/magician_defconfig
+++ b/arch/arm/configs/magician_defconfig
@@ -678,7 +678,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig
index 3b4ecf2..cc3b06e 100644
--- a/arch/arm/configs/msm_defconfig
+++ b/arch/arm/configs/msm_defconfig
@@ -580,7 +580,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 CONFIG_SENSORS_PCA9633=y
diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig
index d38ebf8..83c817f 100644
--- a/arch/arm/configs/mv78xx0_defconfig
+++ b/arch/arm/configs/mv78xx0_defconfig
@@ -832,7 +832,7 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/n770_defconfig b/arch/arm/configs/n770_defconfig
index 568ef17..672f6db 100644
--- a/arch/arm/configs/n770_defconfig
+++ b/arch/arm/configs/n770_defconfig
@@ -767,7 +767,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -798,7 +798,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_TSC2101 is not set
 # CONFIG_SPI_TSC2102 is not set
 # CONFIG_SPI_TSC210X is not set
diff --git a/arch/arm/configs/neocore926_defconfig b/arch/arm/configs/neocore926_defconfig
index 325f1e1..e0e4e98 100644
--- a/arch/arm/configs/neocore926_defconfig
+++ b/arch/arm/configs/neocore926_defconfig
@@ -774,8 +774,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -798,7 +798,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/neponset_defconfig b/arch/arm/configs/neponset_defconfig
index 92ccdc6..d81ea21 100644
--- a/arch/arm/configs/neponset_defconfig
+++ b/arch/arm/configs/neponset_defconfig
@@ -737,7 +737,7 @@
 #
 # Other I2C Chip support
 #
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig
index e042d27..4c6fb7e 100644
--- a/arch/arm/configs/omap3_beagle_defconfig
+++ b/arch/arm/configs/omap3_beagle_defconfig
@@ -687,8 +687,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/arm/configs/omap3_pandora_defconfig b/arch/arm/configs/omap3_pandora_defconfig
index 09543f4..b54ad2e 100644
--- a/arch/arm/configs/omap3_pandora_defconfig
+++ b/arch/arm/configs/omap3_pandora_defconfig
@@ -713,8 +713,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -740,7 +740,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/arm/configs/omap_2430sdp_defconfig b/arch/arm/configs/omap_2430sdp_defconfig
index b0617c0..640e9af 100644
--- a/arch/arm/configs/omap_2430sdp_defconfig
+++ b/arch/arm/configs/omap_2430sdp_defconfig
@@ -710,7 +710,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -743,7 +743,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_TSC2101 is not set
 # CONFIG_SPI_TSC2102 is not set
 # CONFIG_SPI_TSC210X is not set
diff --git a/arch/arm/configs/omap_apollon_2420_defconfig b/arch/arm/configs/omap_apollon_2420_defconfig
index bb39dfc..ac7adf3 100644
--- a/arch/arm/configs/omap_apollon_2420_defconfig
+++ b/arch/arm/configs/omap_apollon_2420_defconfig
@@ -612,7 +612,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_TSC2101 is not set
 # CONFIG_SPI_TSC2102 is not set
 # CONFIG_SPI_TSC210X is not set
diff --git a/arch/arm/configs/omap_generic_1510_defconfig b/arch/arm/configs/omap_generic_1510_defconfig
index 4b1c252..ccdc661 100644
--- a/arch/arm/configs/omap_generic_1510_defconfig
+++ b/arch/arm/configs/omap_generic_1510_defconfig
@@ -637,7 +637,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/omap_generic_1610_defconfig b/arch/arm/configs/omap_generic_1610_defconfig
index fc66f01..0c42c89 100644
--- a/arch/arm/configs/omap_generic_1610_defconfig
+++ b/arch/arm/configs/omap_generic_1610_defconfig
@@ -641,7 +641,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig
index c035072..74dbdc6 100644
--- a/arch/arm/configs/omap_h2_1610_defconfig
+++ b/arch/arm/configs/omap_h2_1610_defconfig
@@ -700,7 +700,7 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -731,7 +731,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_TSC2101=y
 # CONFIG_SPI_TSC2102 is not set
 # CONFIG_SPI_TSC210X is not set
diff --git a/arch/arm/configs/omap_h4_2420_defconfig b/arch/arm/configs/omap_h4_2420_defconfig
index 5bc8918..a4aab8e 100644
--- a/arch/arm/configs/omap_h4_2420_defconfig
+++ b/arch/arm/configs/omap_h4_2420_defconfig
@@ -681,7 +681,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/omap_innovator_1510_defconfig b/arch/arm/configs/omap_innovator_1510_defconfig
index 55b2611..0cfe363 100644
--- a/arch/arm/configs/omap_innovator_1510_defconfig
+++ b/arch/arm/configs/omap_innovator_1510_defconfig
@@ -631,7 +631,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig
index b77d054..aa9d34f 100644
--- a/arch/arm/configs/omap_ldp_defconfig
+++ b/arch/arm/configs/omap_ldp_defconfig
@@ -629,8 +629,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -656,7 +656,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/arm/configs/omap_osk_5912_defconfig b/arch/arm/configs/omap_osk_5912_defconfig
index b68e014..6b3b5c6 100644
--- a/arch/arm/configs/omap_osk_5912_defconfig
+++ b/arch/arm/configs/omap_osk_5912_defconfig
@@ -711,7 +711,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig
index 418ca2f..f8701fa 100644
--- a/arch/arm/configs/onearm_defconfig
+++ b/arch/arm/configs/onearm_defconfig
@@ -698,7 +698,7 @@
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index b2456ca..a8ee698 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -886,8 +886,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/arm/configs/overo_defconfig b/arch/arm/configs/overo_defconfig
index 4920096..a57f9e4 100644
--- a/arch/arm/configs/overo_defconfig
+++ b/arch/arm/configs/overo_defconfig
@@ -858,8 +858,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=y
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -885,7 +885,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/arm/configs/palmz71_defconfig b/arch/arm/configs/palmz71_defconfig
index 6361922..08e1406 100644
--- a/arch/arm/configs/palmz71_defconfig
+++ b/arch/arm/configs/palmz71_defconfig
@@ -554,7 +554,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_TSC2101 is not set
 # CONFIG_SPI_TSC2102 is not set
 # CONFIG_SPI_TSC210X is not set
diff --git a/arch/arm/configs/palmz72_defconfig b/arch/arm/configs/palmz72_defconfig
index 3245f8f..a0dc37c 100644
--- a/arch/arm/configs/palmz72_defconfig
+++ b/arch/arm/configs/palmz72_defconfig
@@ -527,8 +527,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -552,7 +552,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=y
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/arm/configs/pcm027_defconfig b/arch/arm/configs/pcm027_defconfig
index 17b9b24..05ad96a 100644
--- a/arch/arm/configs/pcm027_defconfig
+++ b/arch/arm/configs/pcm027_defconfig
@@ -606,7 +606,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-CONFIG_SENSORS_EEPROM=y
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/pcm038_defconfig b/arch/arm/configs/pcm038_defconfig
index 6b798c2..41429a0 100644
--- a/arch/arm/configs/pcm038_defconfig
+++ b/arch/arm/configs/pcm038_defconfig
@@ -604,7 +604,7 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -626,7 +626,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_HAVE_GPIO_LIB=y
diff --git a/arch/arm/configs/picotux200_defconfig b/arch/arm/configs/picotux200_defconfig
index 59e4463..9018f0f 100644
--- a/arch/arm/configs/picotux200_defconfig
+++ b/arch/arm/configs/picotux200_defconfig
@@ -744,7 +744,7 @@
 #
 CONFIG_SENSORS_DS1337=m
 CONFIG_SENSORS_DS1374=m
-CONFIG_SENSORS_EEPROM=m
+CONFIG_EEPROM_LEGACY=m
 CONFIG_SENSORS_PCF8574=m
 CONFIG_SENSORS_PCA9539=m
 CONFIG_SENSORS_PCF8591=m
diff --git a/arch/arm/configs/pnx4008_defconfig b/arch/arm/configs/pnx4008_defconfig
index 811b8f6..67b5f1e 100644
--- a/arch/arm/configs/pnx4008_defconfig
+++ b/arch/arm/configs/pnx4008_defconfig
@@ -915,7 +915,7 @@
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=m
+CONFIG_EEPROM_LEGACY=m
 CONFIG_SENSORS_PCF8574=m
 # CONFIG_SENSORS_PCA9539 is not set
 CONFIG_SENSORS_PCF8591=m
diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig
index 5cbd8158..cd1d717 100644
--- a/arch/arm/configs/qil-a9260_defconfig
+++ b/arch/arm/configs/qil-a9260_defconfig
@@ -687,7 +687,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -714,7 +714,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/rpc_defconfig b/arch/arm/configs/rpc_defconfig
index f62d181..a29d61f 100644
--- a/arch/arm/configs/rpc_defconfig
+++ b/arch/arm/configs/rpc_defconfig
@@ -590,7 +590,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 35faaea..65a583e 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -923,7 +923,7 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_SENSORS_EEPROM=m
+CONFIG_EEPROM_LEGACY=m
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -950,7 +950,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_HAVE_GPIO_LIB=y
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index cf3c1b5..2e8fa50 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -465,8 +465,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_AT24=y
-# CONFIG_SENSORS_EEPROM is not set
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig
index 4df5b4d..745c68f 100644
--- a/arch/arm/configs/spitz_defconfig
+++ b/arch/arm/configs/spitz_defconfig
@@ -977,8 +977,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -1003,7 +1003,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/arm/configs/sx1_defconfig b/arch/arm/configs/sx1_defconfig
index 853dcdd..25b007f 100644
--- a/arch/arm/configs/sx1_defconfig
+++ b/arch/arm/configs/sx1_defconfig
@@ -610,7 +610,7 @@
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig
index 9033d14..b6f8381 100644
--- a/arch/arm/configs/trizeps4_defconfig
+++ b/arch/arm/configs/trizeps4_defconfig
@@ -948,7 +948,7 @@
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/usb-a9260_defconfig b/arch/arm/configs/usb-a9260_defconfig
index fcb4aaa..fd77740 100644
--- a/arch/arm/configs/usb-a9260_defconfig
+++ b/arch/arm/configs/usb-a9260_defconfig
@@ -676,7 +676,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/usb-a9263_defconfig b/arch/arm/configs/usb-a9263_defconfig
index b786e04..e7c19dd 100644
--- a/arch/arm/configs/usb-a9263_defconfig
+++ b/arch/arm/configs/usb-a9263_defconfig
@@ -668,7 +668,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig
index 8355f88..b11c5da 100644
--- a/arch/arm/configs/versatile_defconfig
+++ b/arch/arm/configs/versatile_defconfig
@@ -611,7 +611,7 @@
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=m
+CONFIG_EEPROM_LEGACY=m
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig
index d01fecb..30f463d 100644
--- a/arch/arm/configs/viper_defconfig
+++ b/arch/arm/configs/viper_defconfig
@@ -860,8 +860,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/arm/configs/xm_x2xx_defconfig b/arch/arm/configs/xm_x2xx_defconfig
index f891364..1039f366 100644
--- a/arch/arm/configs/xm_x2xx_defconfig
+++ b/arch/arm/configs/xm_x2xx_defconfig
@@ -1009,8 +1009,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/arm/configs/yl9200_defconfig b/arch/arm/configs/yl9200_defconfig
index a9f41c2..9192e59 100644
--- a/arch/arm/configs/yl9200_defconfig
+++ b/arch/arm/configs/yl9200_defconfig
@@ -682,7 +682,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild
index 43b0b2b..73237bd 100644
--- a/arch/arm/include/asm/Kbuild
+++ b/arch/arm/include/asm/Kbuild
@@ -1,4 +1,3 @@
 include include/asm-generic/Kbuild.asm
 
 unifdef-y += hwcap.h
-unifdef-y += swab.h
diff --git a/arch/arm/include/asm/byteorder.h b/arch/arm/include/asm/byteorder.h
index c02b6fc..7737974 100644
--- a/arch/arm/include/asm/byteorder.h
+++ b/arch/arm/include/asm/byteorder.h
@@ -15,8 +15,6 @@
 #ifndef __ASM_ARM_BYTEORDER_H
 #define __ASM_ARM_BYTEORDER_H
 
-#include <asm/swab.h>
-
 #ifdef __ARMEB__
 #include <linux/byteorder/big_endian.h>
 #else
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index 09a061c..9ca8d13f 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -98,7 +98,7 @@
 		CALL(sys_uselib)
 		CALL(sys_swapon)
 		CALL(sys_reboot)
-		CALL(OBSOLETE(old_readdir))	/* used by libc4 */
+		CALL(OBSOLETE(sys_old_readdir))	/* used by libc4 */
 /* 90 */	CALL(OBSOLETE(old_mmap))	/* used by libc4 */
 		CALL(sys_munmap)
 		CALL(sys_truncate)
diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
index fe182a8..867ead2 100644
--- a/arch/arm/mach-davinci/usb.c
+++ b/arch/arm/mach-davinci/usb.c
@@ -12,6 +12,7 @@
 
 #include <mach/common.h>
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 
 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
 static struct musb_hdrc_eps_bits musb_eps[] = {
@@ -76,29 +77,6 @@
 	.num_resources  = ARRAY_SIZE(usb_resources),
 };
 
-#ifdef CONFIG_USB_MUSB_OTG
-
-static struct otg_transceiver *xceiv;
-
-struct otg_transceiver *otg_get_transceiver(void)
-{
-	if (xceiv)
-		get_device(xceiv->dev);
-	return xceiv;
-}
-EXPORT_SYMBOL(otg_get_transceiver);
-
-int otg_set_transceiver(struct otg_transceiver *x)
-{
-	if (xceiv && x)
-		return -EBUSY;
-	xceiv = x;
-	return 0;
-}
-EXPORT_SYMBOL(otg_set_transceiver);
-
-#endif
-
 void __init setup_usb(unsigned mA, unsigned potpgt_msec)
 {
 	usb_data.power = mA / 2;
diff --git a/arch/arm/mach-imx/clock.c b/arch/arm/mach-imx/clock.c
index 7ec60fc..cf332ae 100644
--- a/arch/arm/mach-imx/clock.c
+++ b/arch/arm/mach-imx/clock.c
@@ -23,7 +23,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include <mach/imx-regs.h>
+#include <mach/hardware.h>
 
 /*
  * Very simple approach: We can't disable clocks, so we do
diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c
index fa72174..887cb21 100644
--- a/arch/arm/mach-imx/generic.c
+++ b/arch/arm/mach-imx/generic.c
@@ -245,11 +245,11 @@
 	imx_mmc_device.dev.platform_data = info;
 }
 
-static struct imxfb_mach_info imx_fb_info;
+static struct imx_fb_platform_data imx_fb_info;
 
-void __init set_imx_fb_info(struct imxfb_mach_info *hard_imx_fb_info)
+void __init set_imx_fb_info(struct imx_fb_platform_data *hard_imx_fb_info)
 {
-	memcpy(&imx_fb_info,hard_imx_fb_info,sizeof(struct imxfb_mach_info));
+	memcpy(&imx_fb_info,hard_imx_fb_info,sizeof(struct imx_fb_platform_data));
 }
 
 static struct resource imxfb_resources[] = {
diff --git a/arch/arm/mach-imx/include/mach/imx-regs.h b/arch/arm/mach-imx/include/mach/imx-regs.h
index fb9de27..490297f 100644
--- a/arch/arm/mach-imx/include/mach/imx-regs.h
+++ b/arch/arm/mach-imx/include/mach/imx-regs.h
@@ -373,110 +373,4 @@
 #define TSTAT_CAPT         (1<<1)
 #define TSTAT_COMP         (1<<0)
 
-/*
- * LCD Controller
- */
-
-#define LCDC_SSA	__REG(IMX_LCDC_BASE+0x00)
-
-#define LCDC_SIZE	__REG(IMX_LCDC_BASE+0x04)
-#define SIZE_XMAX(x)	((((x) >> 4) & 0x3f) << 20)
-#define SIZE_YMAX(y)    ( (y) & 0x1ff )
-
-#define LCDC_VPW	__REG(IMX_LCDC_BASE+0x08)
-#define VPW_VPW(x)	( (x) & 0x3ff )
-
-#define LCDC_CPOS	__REG(IMX_LCDC_BASE+0x0C)
-#define CPOS_CC1        (1<<31)
-#define CPOS_CC0        (1<<30)
-#define CPOS_OP         (1<<28)
-#define CPOS_CXP(x)     (((x) & 3ff) << 16)
-#define CPOS_CYP(y)     ((y) & 0x1ff)
-
-#define LCDC_LCWHB	__REG(IMX_LCDC_BASE+0x10)
-#define LCWHB_BK_EN     (1<<31)
-#define LCWHB_CW(w)     (((w) & 0x1f) << 24)
-#define LCWHB_CH(h)     (((h) & 0x1f) << 16)
-#define LCWHB_BD(x)     ((x) & 0xff)
-
-#define LCDC_LCHCC	__REG(IMX_LCDC_BASE+0x14)
-#define LCHCC_CUR_COL_R(r) (((r) & 0x1f) << 11)
-#define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 5)
-#define LCHCC_CUR_COL_B(b) ((b) & 0x1f)
-
-#define LCDC_PCR	__REG(IMX_LCDC_BASE+0x18)
-#define PCR_TFT         (1<<31)
-#define PCR_COLOR       (1<<30)
-#define PCR_PBSIZ_1     (0<<28)
-#define PCR_PBSIZ_2     (1<<28)
-#define PCR_PBSIZ_4     (2<<28)
-#define PCR_PBSIZ_8     (3<<28)
-#define PCR_BPIX_1      (0<<25)
-#define PCR_BPIX_2      (1<<25)
-#define PCR_BPIX_4      (2<<25)
-#define PCR_BPIX_8      (3<<25)
-#define PCR_BPIX_12     (4<<25)
-#define PCR_BPIX_16     (4<<25)
-#define PCR_PIXPOL      (1<<24)
-#define PCR_FLMPOL      (1<<23)
-#define PCR_LPPOL       (1<<22)
-#define PCR_CLKPOL      (1<<21)
-#define PCR_OEPOL       (1<<20)
-#define PCR_SCLKIDLE    (1<<19)
-#define PCR_END_SEL     (1<<18)
-#define PCR_END_BYTE_SWAP (1<<17)
-#define PCR_REV_VS      (1<<16)
-#define PCR_ACD_SEL     (1<<15)
-#define PCR_ACD(x)      (((x) & 0x7f) << 8)
-#define PCR_SCLK_SEL    (1<<7)
-#define PCR_SHARP       (1<<6)
-#define PCR_PCD(x)      ((x) & 0x3f)
-
-#define LCDC_HCR	__REG(IMX_LCDC_BASE+0x1C)
-#define HCR_H_WIDTH(x)  (((x) & 0x3f) << 26)
-#define HCR_H_WAIT_1(x) (((x) & 0xff) << 8)
-#define HCR_H_WAIT_2(x) ((x) & 0xff)
-
-#define LCDC_VCR	__REG(IMX_LCDC_BASE+0x20)
-#define VCR_V_WIDTH(x)  (((x) & 0x3f) << 26)
-#define VCR_V_WAIT_1(x) (((x) & 0xff) << 8)
-#define VCR_V_WAIT_2(x) ((x) & 0xff)
-
-#define LCDC_POS	__REG(IMX_LCDC_BASE+0x24)
-#define POS_POS(x)      ((x) & 1f)
-
-#define LCDC_LSCR1	__REG(IMX_LCDC_BASE+0x28)
-#define LSCR1_PS_RISE_DELAY(x)    (((x) & 0x7f) << 26)
-#define LSCR1_CLS_RISE_DELAY(x)   (((x) & 0x3f) << 16)
-#define LSCR1_REV_TOGGLE_DELAY(x) (((x) & 0xf) << 8)
-#define LSCR1_GRAY2(x)            (((x) & 0xf) << 4)
-#define LSCR1_GRAY1(x)            (((x) & 0xf))
-
-#define LCDC_PWMR	__REG(IMX_LCDC_BASE+0x2C)
-#define PWMR_CLS(x)     (((x) & 0x1ff) << 16)
-#define PWMR_LDMSK      (1<<15)
-#define PWMR_SCR1       (1<<10)
-#define PWMR_SCR0       (1<<9)
-#define PWMR_CC_EN      (1<<8)
-#define PWMR_PW(x)      ((x) & 0xff)
-
-#define LCDC_DMACR	__REG(IMX_LCDC_BASE+0x30)
-#define DMACR_BURST     (1<<31)
-#define DMACR_HM(x)     (((x) & 0xf) << 16)
-#define DMACR_TM(x)     ((x) &0xf)
-
-#define LCDC_RMCR	__REG(IMX_LCDC_BASE+0x34)
-#define RMCR_LCDC_EN		(1<<1)
-#define RMCR_SELF_REF		(1<<0)
-
-#define LCDC_LCDICR	__REG(IMX_LCDC_BASE+0x38)
-#define LCDICR_INT_SYN  (1<<2)
-#define LCDICR_INT_CON  (1)
-
-#define LCDC_LCDISR	__REG(IMX_LCDC_BASE+0x40)
-#define LCDISR_UDR_ERR (1<<3)
-#define LCDISR_ERR_RES (1<<2)
-#define LCDISR_EOF     (1<<1)
-#define LCDISR_BOF     (1<<0)
-
 #endif				// _IMX_REGS_H
diff --git a/arch/arm/mach-integrator/clock.h b/arch/arm/mach-integrator/clock.h
deleted file mode 100644
index e69de29..0000000
--- a/arch/arm/mach-integrator/clock.h
+++ /dev/null
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index b240c5f..0d784a7 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -37,16 +37,14 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/gpio-switch.h>
 #include <mach/mux.h>
+#include <mach/dma.h>
 #include <mach/tc.h>
 #include <mach/nand.h>
 #include <mach/irda.h>
 #include <mach/usb.h>
 #include <mach/keypad.h>
 #include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
 
 static int h2_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
@@ -292,41 +290,6 @@
 	.id		= -1,
 };
 
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
-	.spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
-	.spcr1 = RINTM(3) | RRST,
-	.rcr2  = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
-                RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1),
-	.rcr1  = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
-	.xcr2  = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
-                XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG,
-	.xcr1  = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
-	.srgr1 = FWID(15),
-	.srgr2 = GSYNC | CLKSP | FSGM | FPER(31),
-
-	.pcr0  = CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP,
-	/*.pcr0 = CLKXP | CLKRP,*/        /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
-	.name                   = "H2 TSC2101",
-	.mcbsp_regs_alsa        = &mcbsp_regs,
-	.codec_configure_dev    = NULL, /* tsc2101_configure, */
-	.codec_set_samplerate   = NULL, /* tsc2101_set_samplerate, */
-	.codec_clock_setup      = NULL, /* tsc2101_clock_setup, */
-	.codec_clock_on         = NULL, /* tsc2101_clock_on, */
-	.codec_clock_off        = NULL, /* tsc2101_clock_off, */
-	.get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */
-};
-
-static struct platform_device h2_mcbsp1_device = {
-	.name	= "omap_alsa_mcbsp",
-	.id	= 1,
-	.dev = {
-		.platform_data	= &alsa_config,
-	},
-};
-
 static struct platform_device *h2_devices[] __initdata = {
 	&h2_nor_device,
 	&h2_nand_device,
@@ -334,7 +297,6 @@
 	&h2_irda_device,
 	&h2_kp_device,
 	&h2_lcd_device,
-	&h2_mcbsp1_device,
 };
 
 static void __init h2_init_smc91x(void)
@@ -409,11 +371,6 @@
 
 #define H2_NAND_RB_GPIO_PIN	62
 
-static int h2_nand_dev_ready(struct omap_nand_platform_data *data)
-{
-	return gpio_get_value(H2_NAND_RB_GPIO_PIN);
-}
-
 static void __init h2_init(void)
 {
 	/* Here we assume the NOR boot config:  NOR on CS3 (possibly swapped
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 5157eea..bf08b6a 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -49,8 +49,6 @@
 #include <mach/keypad.h>
 #include <mach/dma.h>
 #include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
 
 #define H3_TS_GPIO	48
 
@@ -387,41 +385,6 @@
 	},
 };
 
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
-	.spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
-	.spcr1 = RINTM(3) | RRST,
-	.rcr2  = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
-                RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1),
-	.rcr1  = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
-	.xcr2  = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
-                XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG,
-	.xcr1  = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
-	.srgr1 = FWID(15),
-	.srgr2 = GSYNC | CLKSP | FSGM | FPER(31),
-
-	.pcr0  = CLKRM | SCLKME | FSXP | FSRP | CLKXP | CLKRP,
-	/*.pcr0 = CLKXP | CLKRP,*/        /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
-	.name                   = "H3 TSC2101",
-	.mcbsp_regs_alsa        = &mcbsp_regs,
-	.codec_configure_dev    = NULL, /* tsc2101_configure, */
-	.codec_set_samplerate   = NULL, /* tsc2101_set_samplerate, */
-	.codec_clock_setup      = NULL, /* tsc2101_clock_setup, */
-	.codec_clock_on         = NULL, /* tsc2101_clock_on, */
-	.codec_clock_off        = NULL, /* tsc2101_clock_off, */
-	.get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */
-};
-
-static struct platform_device h3_mcbsp1_device = {
-	.name	= "omap_alsa_mcbsp",
-	.id	= 1,
-	.dev = {
-		.platform_data	= &alsa_config,
-	},
-};
-
 static struct platform_device *devices[] __initdata = {
 	&nor_device,
 	&nand_device,
@@ -430,7 +393,6 @@
 	&h3_irda_device,
 	&h3_kp_device,
 	&h3_lcd_device,
-	&h3_mcbsp1_device,
 };
 
 static struct omap_usb_config h3_usb_config __initdata = {
@@ -472,18 +434,6 @@
 	},
 };
 
-static struct omap_gpio_switch h3_gpio_switches[] __initdata = {
-	{
-		.name			= "mmc_slot",
-		.gpio                   = OMAP_MPUIO(1),
-		.type                   = OMAP_GPIO_SWITCH_TYPE_COVER,
-		.debounce_rising        = 100,
-		.debounce_falling       = 0,
-		.notify                 = h3_mmc_slot_cover_handler,
-		.notify_data            = NULL,
-	},
-};
-
 #define H3_NAND_RB_GPIO_PIN	10
 
 static int nand_dev_ready(struct omap_nand_platform_data *data)
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index af2fb90..071cd02 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -37,8 +37,6 @@
 #include <mach/usb.h>
 #include <mach/keypad.h>
 #include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
 #include <mach/mmc.h>
 
 static int innovator_keymap[] = {
@@ -115,42 +113,6 @@
 	.resource	= &innovator_flash_resource,
 };
 
-#define DEFAULT_BITPERSAMPLE 16
-
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
-	.spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
-	.spcr1 = RINTM(3) | RRST,
-	.rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
-	    RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
-	.rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
-	.xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
-	    XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
-	.xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
-	.srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
-	.srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
-	/*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */
-	.pcr0 = CLKXP | CLKRP,  /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
-	.name			= "OMAP Innovator AIC23",
-	.mcbsp_regs_alsa	= &mcbsp_regs,
-	.codec_configure_dev	= NULL, /* aic23_configure, */
-	.codec_set_samplerate	= NULL, /* aic23_set_samplerate, */
-	.codec_clock_setup	= NULL, /* aic23_clock_setup, */
-	.codec_clock_on		= NULL, /* aic23_clock_on, */
-	.codec_clock_off	= NULL, /* aic23_clock_off, */
-	.get_default_samplerate	= NULL, /* aic23_get_default_samplerate, */
-};
-
-static struct platform_device innovator_mcbsp1_device = {
-	.name	= "omap_alsa_mcbsp",
- 	.id	= 1,
-	.dev = {
-		.platform_data	= &alsa_config,
-	},
-};
-
 static struct resource innovator_kp_resources[] = {
 	[0] = {
 		.start	= INT_KEYBOARD,
@@ -227,7 +189,6 @@
 static struct platform_device *innovator1510_devices[] __initdata = {
 	&innovator_flash_device,
 	&innovator1510_smc91x_device,
-	&innovator_mcbsp1_device,
 	&innovator_kp_device,
 	&innovator1510_lcd_device,
 	&innovator1510_spi_device,
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 4970c40..af51e0b 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -32,7 +32,6 @@
 #include <mach/keypad.h>
 #include <mach/common.h>
 #include <mach/dsp_common.h>
-#include <mach/aic23.h>
 #include <mach/omapfb.h>
 #include <mach/lcd_mipid.h>
 #include <mach/mmc.h>
@@ -261,6 +260,13 @@
  */
 static int audio_pwr_state = -1;
 
+static inline void aic23_power_up(void)
+{
+}
+static inline void aic23_power_down(void)
+{
+}
+
 /*
  * audio_pwr_up / down should be called under audio_pwr_lock
  */
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index ff9e67b..1a16ecb 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -51,8 +51,6 @@
 #include <mach/mux.h>
 #include <mach/tc.h>
 #include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
 
 static struct mtd_partition osk_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
@@ -141,47 +139,10 @@
 	.resource	= osk5912_cf_resources,
 };
 
-#define DEFAULT_BITPERSAMPLE 16
-
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
-	.spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
-	.spcr1 = RINTM(3) | RRST,
-	.rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
-	    RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
-	.rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
-	.xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
-	    XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
-	.xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
-	.srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
-	.srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
-	/*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */
-	.pcr0 = CLKXP | CLKRP,  /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
-	.name			= "OSK AIC23",
-	.mcbsp_regs_alsa	= &mcbsp_regs,
-	.codec_configure_dev	= NULL, /* aic23_configure, */
-	.codec_set_samplerate	= NULL, /* aic23_set_samplerate, */
-	.codec_clock_setup	= NULL, /* aic23_clock_setup, */
-	.codec_clock_on		= NULL, /* aic23_clock_on, */
-	.codec_clock_off	= NULL, /* aic23_clock_off, */
-	.get_default_samplerate	= NULL, /* aic23_get_default_samplerate, */
-};
-
-static struct platform_device osk5912_mcbsp1_device = {
-	.name	= "omap_alsa_mcbsp",
-	.id	= 1,
-	.dev = {
-		.platform_data	= &alsa_config,
-	},
-};
-
 static struct platform_device *osk5912_devices[] __initdata = {
 	&osk5912_flash_device,
 	&osk5912_smc91x_device,
 	&osk5912_cf_device,
-	&osk5912_mcbsp1_device,
 };
 
 static struct gpio_led tps_leds[] = {
@@ -259,8 +220,10 @@
 		.platform_data	= &tps_board,
 
 	},
+	{
+		I2C_BOARD_INFO("tlv320aic23", 0x1B),
+	},
 	/* TODO when driver support is ready:
-	 *  - aic23 audio chip at 0x1a
 	 *  - optionally on Mistral, ov9640 camera sensor at 0x30
 	 */
 };
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 75e32d3..99f2b43 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -42,8 +42,6 @@
 #include <mach/irda.h>
 #include <mach/keypad.h>
 #include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
 
 static void __init omap_palmte_init_irq(void)
 {
@@ -195,15 +193,6 @@
 	.pins[0]	= 2,
 };
 
-static struct omap_mmc_config palmte_mmc_config __initdata = {
-	.mmc[0]		= {
-		.enabled 	= 1,
-		.wp_pin		= PALMTE_MMC_WP_GPIO,
-		.power_pin	= PALMTE_MMC_POWER_GPIO,
-		.switch_pin	= PALMTE_MMC_SWITCH_GPIO,
-	},
-};
-
 static struct omap_lcd_config palmte_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
@@ -212,24 +201,6 @@
 	.enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
 };
 
-static struct omap_mcbsp_reg_cfg palmte_mcbsp1_regs = {
-	.spcr2	= FRST | GRST | XRST | XINTM(3),
-	.xcr2	= XDATDLY(1) | XFIG,
-	.xcr1	= XWDLEN1(OMAP_MCBSP_WORD_32),
-	.pcr0	= SCLKME | FSXP | CLKXP,
-};
-
-static struct omap_alsa_codec_config palmte_alsa_config = {
-	.name			= "TSC2102 audio",
-	.mcbsp_regs_alsa	= &palmte_mcbsp1_regs,
-	.codec_configure_dev	= NULL,	/* tsc2102_configure, */
-	.codec_set_samplerate	= NULL,	/* tsc2102_set_samplerate, */
-	.codec_clock_setup	= NULL,	/* tsc2102_clock_setup, */
-	.codec_clock_on		= NULL,	/* tsc2102_clock_on, */
-	.codec_clock_off	= NULL,	/* tsc2102_clock_off, */
-	.get_default_samplerate	= NULL,	/* tsc2102_get_default_samplerate, */
-};
-
 #ifdef CONFIG_APM
 /*
  * Values measured in 10 minute intervals averaged over 10 samples.
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 5c001af..1cbc127 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -30,7 +30,6 @@
 #include <asm/mach/flash.h>
 
 #include <mach/led.h>
-#include <mach/mcbsp.h>
 #include <mach/gpio.h>
 #include <mach/mux.h>
 #include <mach/usb.h>
@@ -40,7 +39,6 @@
 #include <mach/irda.h>
 #include <mach/keypad.h>
 #include <mach/common.h>
-#include <mach/omap-alsa.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
@@ -122,44 +120,6 @@
 	.resource	= &palmtt_flash_resource,
 };
 
-#define DEFAULT_BITPERSAMPLE 16
-
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
-	.spcr2		= FREE | FRST | GRST | XRST | XINTM(3),
-	.spcr1		= RINTM(3) | RRST,
-	.rcr2		= RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
-				RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
-	.rcr1		= RFRLEN1(OMAP_MCBSP_WORD_8) |
-				RWDLEN1(OMAP_MCBSP_WORD_16),
-	.xcr2		= XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
-				XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
-	.xcr1		= XFRLEN1(OMAP_MCBSP_WORD_8) |
-				XWDLEN1(OMAP_MCBSP_WORD_16),
-	.srgr1		= FWID(DEFAULT_BITPERSAMPLE - 1),
-	.srgr2		= GSYNC | CLKSP | FSGM |
-				FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
-	.pcr0		= CLKXP | CLKRP,	/* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
-	.name			= "PalmTT AIC23",
-	.mcbsp_regs_alsa	= &mcbsp_regs,
-	.codec_configure_dev	= NULL, /* aic23_configure, */
-	.codec_set_samplerate	= NULL, /* aic23_set_samplerate, */
-	.codec_clock_setup	= NULL, /* aic23_clock_setup, */
-	.codec_clock_on		= NULL, /* aic23_clock_on, */
-	.codec_clock_off	= NULL, /* aic23_clock_off, */
-	.get_default_samplerate	= NULL, /* aic23_get_default_samplerate, */
-};
-
-static struct platform_device palmtt_mcbsp1_device = {
-	.name	= "omap_alsa_mcbsp",
-	.id	= 1,
-	.dev	= {
-		.platform_data	= &alsa_config,
-	},
-};
-
 static struct resource palmtt_kp_resources[] = {
 	[0] = {
 		.start	= INT_KEYBOARD,
@@ -257,7 +217,6 @@
 
 static struct platform_device *palmtt_devices[] __initdata = {
 	&palmtt_flash_device,
-	&palmtt_mcbsp1_device,
 	&palmtt_kp_device,
 	&palmtt_lcd_device,
 	&palmtt_irda_device,
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index cc05257..baf5efb 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -32,7 +32,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <mach/mcbsp.h>
 #include <mach/gpio.h>
 #include <mach/mux.h>
 #include <mach/usb.h>
@@ -179,41 +178,6 @@
 	.id	= -1,
 };
 
-#define DEFAULT_BITPERSAMPLE 16
-
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
-	.spcr2	= FREE | FRST | GRST | XRST | XINTM(3),
-	.spcr1	= RINTM(3) | RRST,
-	.rcr2	= RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
-			RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
-	.rcr1	= RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
-	.xcr2	= XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
-			XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
-	.xcr1	= XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
-	.srgr1	= FWID(DEFAULT_BITPERSAMPLE - 1),
-	.srgr2	= GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
-	.pcr0	= CLKXP | CLKRP,	/* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
-	.name			= "PalmZ71 AIC23",
-	.mcbsp_regs_alsa	= &mcbsp_regs,
-	.codec_configure_dev	= NULL,	/* aic23_configure */
-	.codec_set_samplerate	= NULL,	/* aic23_set_samplerate */
-	.codec_clock_setup	= NULL,	/* aic23_clock_setup */
-	.codec_clock_on		= NULL,	/* aic23_clock_on */
-	.codec_clock_off	= NULL,	/* aic23_clock_off */
-	.get_default_samplerate	= NULL,	/* aic23_get_default_samplerate */
-};
-
-static struct platform_device palmz71_mcbsp1_device = {
-	.name	= "omap_alsa_mcbsp",
-	.id	= 1,
-	.dev = {
-		.platform_data = &alsa_config,
-	},
-};
-
 static struct omap_backlight_config palmz71_backlight_config = {
 	.default_intensity	= 0xa0,
 };
@@ -229,7 +193,6 @@
 static struct platform_device *devices[] __initdata = {
 	&palmz71_rom_device,
 	&palmz71_kp_device,
-	&palmz71_mcbsp1_device,
 	&palmz71_lcd_device,
 	&palmz71_irda_device,
 	&palmz71_spi_device,
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 8171fe0..28c76a1 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -34,13 +34,12 @@
 
 #include <mach/gpio.h>
 #include <mach/mux.h>
+#include <mach/dma.h>
 #include <mach/irda.h>
 #include <mach/usb.h>
 #include <mach/tc.h>
 #include <mach/board.h>
 #include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
 #include <mach/keypad.h>
 
 /* Write to I2C device */
@@ -254,35 +253,6 @@
 	.resource	= sx1_irda_resources,
 };
 
-/*----------- McBSP & Sound -------------------------*/
-
-/* Playback interface - McBSP1 */
-static struct omap_mcbsp_reg_cfg mcbsp1_regs = {
-	.spcr2	= XINTM(3),	/* SPCR2=30 */
-	.spcr1	= RINTM(3),	/* SPCR1=30 */
-	.rcr2	= 0,	/* RCR2 =00 */
-	.rcr1	= RFRLEN1(1) | RWDLEN1(OMAP_MCBSP_WORD_16),	/* RCR1=140 */
-	.xcr2	= 0,	/* XCR2 = 0 */
-	.xcr1	= XFRLEN1(1) | XWDLEN1(OMAP_MCBSP_WORD_16),	/* XCR1 = 140 */
-	.srgr1	= FWID(15) | CLKGDV(12),	/* SRGR1=0f0c */
-	.srgr2	= FSGM | FPER(31),	/* SRGR2=101f */
-	.pcr0	= FSXM | FSRM | CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP,
-						/* PCR0 =0f0f */
-};
-
-static struct omap_alsa_codec_config sx1_alsa_config = {
-	.name			= "SX1 EGold",
-	.mcbsp_regs_alsa	= &mcbsp1_regs,
-};
-
-static struct platform_device sx1_mcbsp1_device = {
-	.name	= "omap_alsa_mcbsp",
-	.id	= 1,
-	.dev = {
-		.platform_data	= &sx1_alsa_config,
-	},
-};
-
 /*----------- MTD -------------------------*/
 
 static struct mtd_partition sx1_partitions[] = {
@@ -394,7 +364,6 @@
 	&sx1_flash_device,
 	&sx1_kp_device,
 	&sx1_lcd_device,
-	&sx1_mcbsp1_device,
 	&sx1_irda_device,
 };
 /*-----------------------------------------*/
@@ -423,9 +392,9 @@
 
 	/* turn on USB power */
 	/* sx1_setusbpower(1); cant do it here because i2c is not ready */
-	omap_request_gpio(1);	/* A_IRDA_OFF */
-	omap_request_gpio(11);	/* A_SWITCH */
-	omap_request_gpio(15);	/* A_USB_ON */
+	gpio_request(1, "A_IRDA_OFF");
+	gpio_request(11, "A_SWITCH");
+	gpio_request(15, "A_USB_ON");
 	gpio_direction_output(1, 1);	/*A_IRDA_OFF = 1 */
 	gpio_direction_output(11, 0);	/*A_SWITCH = 0 */
 	gpio_direction_output(15, 0);	/*A_USB_ON = 0 */
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index c224f3c..a765354 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -22,7 +22,6 @@
 #include <linux/reboot.h>
 #include <linux/serial_8250.h>
 #include <linux/serial_reg.h>
-#include <linux/irq.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index 4474da7..ca7a0cc 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -17,6 +17,7 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 
+#include <mach/irqs.h>
 #include <mach/dma.h>
 #include <mach/irqs.h>
 #include <mach/mux.h>
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index bf1e5d3..0a7b24ba 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -22,8 +22,6 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/onenand.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/leds.h>
 #include <linux/err.h>
@@ -282,65 +280,16 @@
 {
 	/* LED0 - AA10 */
 	omap_cfg_reg(AA10_242X_GPIO13);
-	omap_request_gpio(LED0_GPIO13);
-	omap_set_gpio_direction(LED0_GPIO13, 0);
-	omap_set_gpio_dataout(LED0_GPIO13, 0);
+	gpio_request(LED0_GPIO13, "LED0");
+	gpio_direction_output(LED0_GPIO13, 0);
 	/* LED1  - AA6 */
 	omap_cfg_reg(AA6_242X_GPIO14);
-	omap_request_gpio(LED1_GPIO14);
-	omap_set_gpio_direction(LED1_GPIO14, 0);
-	omap_set_gpio_dataout(LED1_GPIO14, 0);
+	gpio_request(LED1_GPIO14, "LED1");
+	gpio_direction_output(LED1_GPIO14, 0);
 	/* LED2  - AA4 */
 	omap_cfg_reg(AA4_242X_GPIO15);
-	omap_request_gpio(LED2_GPIO15);
-	omap_set_gpio_direction(LED2_GPIO15, 0);
-	omap_set_gpio_dataout(LED2_GPIO15, 0);
-}
-
-static irqreturn_t apollon_sw_interrupt(int irq, void *ignored)
-{
-	static unsigned int led0, led1, led2;
-
-	if (irq == OMAP_GPIO_IRQ(SW_ENTER_GPIO16))
-		omap_set_gpio_dataout(LED0_GPIO13, led0 ^= 1);
-	else if (irq == OMAP_GPIO_IRQ(SW_UP_GPIO17))
-		omap_set_gpio_dataout(LED1_GPIO14, led1 ^= 1);
-	else if (irq == OMAP_GPIO_IRQ(SW_DOWN_GPIO58))
-		omap_set_gpio_dataout(LED2_GPIO15, led2 ^= 1);
-
-	return IRQ_HANDLED;
-}
-
-static void __init apollon_sw_init(void)
-{
-	/* Enter SW - Y11 */
-	omap_cfg_reg(Y11_242X_GPIO16);
-	omap_request_gpio(SW_ENTER_GPIO16);
-	gpio_direction_input(SW_ENTER_GPIO16);
-	/* Up SW - AA12 */
-	omap_cfg_reg(AA12_242X_GPIO17);
-	omap_request_gpio(SW_UP_GPIO17);
-	gpio_direction_input(SW_UP_GPIO17);
-	/* Down SW - AA8 */
-	omap_cfg_reg(AA8_242X_GPIO58);
-	omap_request_gpio(SW_DOWN_GPIO58);
-	gpio_direction_input(SW_DOWN_GPIO58);
-
-	set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQ_TYPE_EDGE_RISING);
-	if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt,
-				IRQF_SHARED, "enter sw",
-				&apollon_sw_interrupt))
-		return;
-	set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQ_TYPE_EDGE_RISING);
-	if (request_irq(OMAP_GPIO_IRQ(SW_UP_GPIO17), &apollon_sw_interrupt,
-				IRQF_SHARED, "up sw",
-				&apollon_sw_interrupt))
-		return;
-	set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQ_TYPE_EDGE_RISING);
-	if (request_irq(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), &apollon_sw_interrupt,
-				IRQF_SHARED, "down sw",
-				&apollon_sw_interrupt))
-		return;
+	gpio_request(LED2_GPIO15, "LED2");
+	gpio_direction_output(LED2_GPIO15, 0);
 }
 
 static void __init apollon_usb_init(void)
@@ -357,7 +306,6 @@
 	u32 v;
 
 	apollon_led_init();
-	apollon_sw_init();
 	apollon_flash_init();
 	apollon_usb_init();
 
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index aa69727..f6a1345 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -88,7 +88,7 @@
 
 	ldp_smc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
 
-	if (omap_request_gpio(eth_gpio) < 0) {
+	if (gpio_request(eth_gpio, "smc911x irq") < 0) {
 		printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n",
 				eth_gpio);
 		return;
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 9e5ada0..38c88fb 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -28,6 +28,8 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 
+#include <linux/i2c/twl4030.h>
+
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -120,6 +122,9 @@
 		unsigned gpio, unsigned ngpio)
 {
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
+	omap_cfg_reg(AH8_34XX_GPIO29);
+	mmc[0].gpio_cd = gpio + 0;
+	twl4030_mmc_init(mmc);
 
 	/* REVISIT: need ehci-omap hooks for external VBUS
 	 * power switch and overcurrent detect
@@ -304,10 +309,6 @@
 	omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
 	omap_serial_init();
 
-	omap_cfg_reg(AH8_34XX_GPIO29);
-	mmc[0].gpio_cd = gpio + 0;
-	twl4030_mmc_init(mmc);
-
 	omap_cfg_reg(J25_34XX_GPIO170);
 	gpio_request(170, "DVI_nPD");
 	/* REVISIT leave DVI powered down until it's needed ... */
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index acdc709..e20023c 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -17,6 +17,7 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 
+#include <mach/irqs.h>
 #include <mach/dma.h>
 #include <mach/irqs.h>
 #include <mach/mux.h>
diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
index 9307a24..9ebc93f 100644
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ b/arch/arm/mach-w90x900/mach-w90p910evb.c
@@ -29,6 +29,7 @@
 #include <asm/mach-types.h>
 
 #include <mach/regs-serial.h>
+#include <mach/map.h>
 
 #include "cpu.h"
 
diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c
index 3a69e38..bcc838f 100644
--- a/arch/arm/mach-w90x900/time.c
+++ b/arch/arm/mach-w90x900/time.c
@@ -28,7 +28,6 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
-#include <mach/system.h>
 #include <mach/map.h>
 #include <mach/regs-timer.h>
 
diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c
index bdb5fd9..1601698 100644
--- a/arch/arm/mm/copypage-v4mc.c
+++ b/arch/arm/mm/copypage-v4mc.c
@@ -68,7 +68,7 @@
 	: "r" (from), "r" (to), "I" (PAGE_SIZE / 64));
 }
 
-void v4_mc_copy_user_highpage(struct page *from, struct page *to,
+void v4_mc_copy_user_highpage(struct page *to, struct page *from,
 	unsigned long vaddr)
 {
 	void *kto = kmap_atomic(to, KM_USER1);
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 18373f7..9f88dd3 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -138,7 +138,7 @@
  */
 static void unmap_area_sections(unsigned long virt, unsigned long size)
 {
-	unsigned long addr = virt, end = virt + (size & ~SZ_1M);
+	unsigned long addr = virt, end = virt + (size & ~(SZ_1M - 1));
 	pgd_t *pgd;
 
 	flush_cache_vunmap(addr, end);
@@ -337,10 +337,7 @@
 	void *addr = (void *)(PAGE_MASK & (unsigned long)io_addr);
 #ifndef CONFIG_SMP
 	struct vm_struct **p, *tmp;
-#endif
-	unsigned int section_mapping = 0;
 
-#ifndef CONFIG_SMP
 	/*
 	 * If this is a section based mapping we need to handle it
 	 * specially as the VM subsystem does not know how to handle
@@ -352,11 +349,8 @@
 	for (p = &vmlist ; (tmp = *p) ; p = &tmp->next) {
 		if ((tmp->flags & VM_IOREMAP) && (tmp->addr == addr)) {
 			if (tmp->flags & VM_ARM_SECTION_MAPPING) {
-				*p = tmp->next;
 				unmap_area_sections((unsigned long)tmp->addr,
 						    tmp->size);
-				kfree(tmp);
-				section_mapping = 1;
 			}
 			break;
 		}
@@ -364,7 +358,6 @@
 	write_unlock(&vmlist_lock);
 #endif
 
-	if (!section_mapping)
-		vunmap(addr);
+	vunmap(addr);
 }
 EXPORT_SYMBOL(__iounmap);
diff --git a/arch/arm/mm/proc-syms.c b/arch/arm/mm/proc-syms.c
index 4ad3bf2..195e48e 100644
--- a/arch/arm/mm/proc-syms.c
+++ b/arch/arm/mm/proc-syms.c
@@ -27,6 +27,7 @@
 EXPORT_SYMBOL(__cpuc_flush_user_all);
 EXPORT_SYMBOL(__cpuc_flush_user_range);
 EXPORT_SYMBOL(__cpuc_coherent_kern_range);
+EXPORT_SYMBOL(dmac_inv_range);  /* because of flush_ioremap_region() */
 #else
 EXPORT_SYMBOL(cpu_cache);
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/ipu.h b/arch/arm/plat-mxc/include/mach/ipu.h
new file mode 100644
index 0000000..a9221f1
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/ipu.h
@@ -0,0 +1,181 @@
+/*
+ * Copyright (C) 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * Copyright (C) 2005-2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _IPU_H_
+#define _IPU_H_
+
+#include <linux/types.h>
+#include <linux/dmaengine.h>
+
+/* IPU DMA Controller channel definitions. */
+enum ipu_channel {
+	IDMAC_IC_0 = 0,		/* IC (encoding task) to memory */
+	IDMAC_IC_1 = 1,		/* IC (viewfinder task) to memory */
+	IDMAC_ADC_0 = 1,
+	IDMAC_IC_2 = 2,
+	IDMAC_ADC_1 = 2,
+	IDMAC_IC_3 = 3,
+	IDMAC_IC_4 = 4,
+	IDMAC_IC_5 = 5,
+	IDMAC_IC_6 = 6,
+	IDMAC_IC_7 = 7,		/* IC (sensor data) to memory */
+	IDMAC_IC_8 = 8,
+	IDMAC_IC_9 = 9,
+	IDMAC_IC_10 = 10,
+	IDMAC_IC_11 = 11,
+	IDMAC_IC_12 = 12,
+	IDMAC_IC_13 = 13,
+	IDMAC_SDC_0 = 14,	/* Background synchronous display data */
+	IDMAC_SDC_1 = 15,	/* Foreground data (overlay) */
+	IDMAC_SDC_2 = 16,
+	IDMAC_SDC_3 = 17,
+	IDMAC_ADC_2 = 18,
+	IDMAC_ADC_3 = 19,
+	IDMAC_ADC_4 = 20,
+	IDMAC_ADC_5 = 21,
+	IDMAC_ADC_6 = 22,
+	IDMAC_ADC_7 = 23,
+	IDMAC_PF_0 = 24,
+	IDMAC_PF_1 = 25,
+	IDMAC_PF_2 = 26,
+	IDMAC_PF_3 = 27,
+	IDMAC_PF_4 = 28,
+	IDMAC_PF_5 = 29,
+	IDMAC_PF_6 = 30,
+	IDMAC_PF_7 = 31,
+};
+
+/* Order significant! */
+enum ipu_channel_status {
+	IPU_CHANNEL_FREE,
+	IPU_CHANNEL_INITIALIZED,
+	IPU_CHANNEL_READY,
+	IPU_CHANNEL_ENABLED,
+};
+
+#define IPU_CHANNELS_NUM 32
+
+enum pixel_fmt {
+	/* 1 byte */
+	IPU_PIX_FMT_GENERIC,
+	IPU_PIX_FMT_RGB332,
+	IPU_PIX_FMT_YUV420P,
+	IPU_PIX_FMT_YUV422P,
+	IPU_PIX_FMT_YUV420P2,
+	IPU_PIX_FMT_YVU422P,
+	/* 2 bytes */
+	IPU_PIX_FMT_RGB565,
+	IPU_PIX_FMT_RGB666,
+	IPU_PIX_FMT_BGR666,
+	IPU_PIX_FMT_YUYV,
+	IPU_PIX_FMT_UYVY,
+	/* 3 bytes */
+	IPU_PIX_FMT_RGB24,
+	IPU_PIX_FMT_BGR24,
+	/* 4 bytes */
+	IPU_PIX_FMT_GENERIC_32,
+	IPU_PIX_FMT_RGB32,
+	IPU_PIX_FMT_BGR32,
+	IPU_PIX_FMT_ABGR32,
+	IPU_PIX_FMT_BGRA32,
+	IPU_PIX_FMT_RGBA32,
+};
+
+enum ipu_color_space {
+	IPU_COLORSPACE_RGB,
+	IPU_COLORSPACE_YCBCR,
+	IPU_COLORSPACE_YUV
+};
+
+/*
+ * Enumeration of IPU rotation modes
+ */
+enum ipu_rotate_mode {
+	/* Note the enum values correspond to BAM value */
+	IPU_ROTATE_NONE = 0,
+	IPU_ROTATE_VERT_FLIP = 1,
+	IPU_ROTATE_HORIZ_FLIP = 2,
+	IPU_ROTATE_180 = 3,
+	IPU_ROTATE_90_RIGHT = 4,
+	IPU_ROTATE_90_RIGHT_VFLIP = 5,
+	IPU_ROTATE_90_RIGHT_HFLIP = 6,
+	IPU_ROTATE_90_LEFT = 7,
+};
+
+struct ipu_platform_data {
+	unsigned int	irq_base;
+};
+
+/*
+ * Enumeration of DI ports for ADC.
+ */
+enum display_port {
+	DISP0,
+	DISP1,
+	DISP2,
+	DISP3
+};
+
+struct idmac_video_param {
+	unsigned short		in_width;
+	unsigned short		in_height;
+	uint32_t		in_pixel_fmt;
+	unsigned short		out_width;
+	unsigned short		out_height;
+	uint32_t		out_pixel_fmt;
+	unsigned short		out_stride;
+	bool			graphics_combine_en;
+	bool			global_alpha_en;
+	bool			key_color_en;
+	enum display_port	disp;
+	unsigned short		out_left;
+	unsigned short		out_top;
+};
+
+/*
+ * Union of initialization parameters for a logical channel. So far only video
+ * parameters are used.
+ */
+union ipu_channel_param {
+	struct idmac_video_param video;
+};
+
+struct idmac_tx_desc {
+	struct dma_async_tx_descriptor	txd;
+	struct scatterlist		*sg;	/* scatterlist for this */
+	unsigned int			sg_len;	/* tx-descriptor. */
+	struct list_head		list;
+};
+
+struct idmac_channel {
+	struct dma_chan		dma_chan;
+	dma_cookie_t		completed;	/* last completed cookie	   */
+	union ipu_channel_param	params;
+	enum ipu_channel	link;	/* input channel, linked to the output	   */
+	enum ipu_channel_status	status;
+	void			*client;	/* Only one client per channel	   */
+	unsigned int		n_tx_desc;
+	struct idmac_tx_desc	*desc;		/* allocated tx-descriptors	   */
+	struct scatterlist	*sg[2];	/* scatterlist elements in buffer-0 and -1 */
+	struct list_head	free_list;	/* free tx-descriptors		   */
+	struct list_head	queue;		/* queued tx-descriptors	   */
+	spinlock_t		lock;		/* protects sg[0,1], queue	   */
+	struct mutex		chan_mutex; /* protects status, cookie, free_list  */
+	bool			sec_chan_en;
+	int			active_buffer;
+	unsigned int		eof_irq;
+	char			eof_name[16];	/* EOF IRQ name for request_irq()  */
+};
+
+#define to_tx_desc(tx) container_of(tx, struct idmac_tx_desc, txd)
+#define to_idmac_chan(c) container_of(c, struct idmac_channel, dma_chan)
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index e06d3cb..c02b8fc 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -35,7 +35,15 @@
 #define MXC_BOARD_IRQ_START	(MXC_INTERNAL_IRQS + MXC_GPIO_IRQS)
 #define MXC_BOARD_IRQS	16
 
-#define NR_IRQS		(MXC_BOARD_IRQ_START + MXC_BOARD_IRQS)
+#define MXC_IPU_IRQ_START	(MXC_BOARD_IRQ_START + MXC_BOARD_IRQS)
+
+#ifdef CONFIG_MX3_IPU_IRQS
+#define MX3_IPU_IRQS CONFIG_MX3_IPU_IRQS
+#else
+#define MX3_IPU_IRQS 0
+#endif
+
+#define NR_IRQS			(MXC_IPU_IRQ_START + MX3_IPU_IRQS)
 
 extern void imx_irq_set_priority(unsigned char irq, unsigned char prio);
 
diff --git a/arch/arm/plat-mxc/include/mach/mx3fb.h b/arch/arm/plat-mxc/include/mach/mx3fb.h
new file mode 100644
index 0000000..e391a76
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx3fb.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MX3FB_H__
+#define __ASM_ARCH_MX3FB_H__
+
+#include <linux/device.h>
+#include <linux/fb.h>
+
+/* Proprietary FB_SYNC_ flags */
+#define FB_SYNC_OE_ACT_HIGH    0x80000000
+#define FB_SYNC_CLK_INVERT     0x40000000
+#define FB_SYNC_DATA_INVERT    0x20000000
+#define FB_SYNC_CLK_IDLE_EN    0x10000000
+#define FB_SYNC_SHARP_MODE     0x08000000
+#define FB_SYNC_SWAP_RGB       0x04000000
+#define FB_SYNC_CLK_SEL_EN     0x02000000
+
+/**
+ * struct mx3fb_platform_data - mx3fb platform data
+ *
+ * @dma_dev:   pointer to the dma-device, used for dma-slave connection
+ * @mode:      pointer to a platform-provided per mxc_register_fb() videomode
+ */
+struct mx3fb_platform_data {
+       struct device                   *dma_dev;
+       const char                      *name;
+       const struct fb_videomode       *mode;
+       int                             num_modes;
+};
+
+#endif
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 692d2b4..e77373c39 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -278,14 +278,11 @@
 		u32 val;
 
 		val = dma_read(CCR(lch));
-		val &= ~(3 << 19);
-		if (dma_trigger > 63)
-			val |= 1 << 20;
-		if (dma_trigger > 31)
-			val |= 1 << 19;
 
-		val &= ~(0x1f);
-		val |= (dma_trigger & 0x1f);
+		/* DMA_SYNCHRO_CONTROL_UPPER depends on the channel number */
+		val &= ~((3 << 19) | 0x1f);
+		val |= (dma_trigger & ~0x1f) << 14;
+		val |= dma_trigger & 0x1f;
 
 		if (sync_mode & OMAP_DMA_SYNC_FRAME)
 			val |= 1 << 5;
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 07b6968..f856a90 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -1789,6 +1789,8 @@
 /* FIXME for at least omap2, show pullup/pulldown state */
 
 			irqstat = irq_desc[irq].status;
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) ||	\
+		defined(CONFIG_ARCH_OMAP34XX)
 			if (is_in && ((bank->suspend_wakeup & mask)
 					|| irqstat & IRQ_TYPE_SENSE_MASK)) {
 				char	*trigger = NULL;
@@ -1818,6 +1820,7 @@
 						(bank->suspend_wakeup & mask)
 							? " wakeup" : "");
 			}
+#endif
 			seq_printf(s, "\n");
 		}
 
diff --git a/arch/arm/plat-omap/include/mach/aic23.h b/arch/arm/plat-omap/include/mach/aic23.h
deleted file mode 100644
index 5ccedac..0000000
--- a/arch/arm/plat-omap/include/mach/aic23.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/aic23.h
- *
- * Hardware definitions for TI TLV320AIC23 audio codec
- *
- * Copyright (C) 2002 RidgeRun, Inc.
- * Author: Steve Johnson
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_AIC23_H
-#define __ASM_ARCH_AIC23_H
-
-// Codec TLV320AIC23
-#define LEFT_LINE_VOLUME_ADDR		0x00
-#define RIGHT_LINE_VOLUME_ADDR		0x01
-#define LEFT_CHANNEL_VOLUME_ADDR	0x02
-#define RIGHT_CHANNEL_VOLUME_ADDR	0x03
-#define ANALOG_AUDIO_CONTROL_ADDR	0x04
-#define DIGITAL_AUDIO_CONTROL_ADDR	0x05
-#define POWER_DOWN_CONTROL_ADDR		0x06
-#define DIGITAL_AUDIO_FORMAT_ADDR	0x07
-#define SAMPLE_RATE_CONTROL_ADDR	0x08
-#define DIGITAL_INTERFACE_ACT_ADDR	0x09
-#define RESET_CONTROL_ADDR		0x0F
-
-// Left (right) line input volume control register
-#define LRS_ENABLED			0x0100
-#define LIM_MUTED			0x0080
-#define LIV_DEFAULT			0x0017
-#define LIV_MAX				0x001f
-#define LIV_MIN				0x0000
-
-// Left (right) channel headphone volume control register
-#define LZC_ON				0x0080
-#define LHV_DEFAULT			0x0079
-#define LHV_MAX				0x007f
-#define LHV_MIN				0x0000
-
-// Analog audio path control register
-#define STA_REG(x)			((x)<<6)
-#define STE_ENABLED			0x0020
-#define DAC_SELECTED			0x0010
-#define BYPASS_ON			0x0008
-#define INSEL_MIC			0x0004
-#define MICM_MUTED			0x0002
-#define MICB_20DB			0x0001
-
-// Digital audio path control register
-#define DACM_MUTE			0x0008
-#define DEEMP_32K			0x0002
-#define DEEMP_44K			0x0004
-#define DEEMP_48K			0x0006
-#define ADCHP_ON			0x0001
-
-// Power control down register
-#define DEVICE_POWER_OFF	  	0x0080
-#define CLK_OFF				0x0040
-#define OSC_OFF				0x0020
-#define OUT_OFF				0x0010
-#define DAC_OFF				0x0008
-#define ADC_OFF				0x0004
-#define MIC_OFF				0x0002
-#define LINE_OFF			0x0001
-
-// Digital audio interface register
-#define MS_MASTER			0x0040
-#define LRSWAP_ON			0x0020
-#define LRP_ON				0x0010
-#define IWL_16				0x0000
-#define IWL_20				0x0004
-#define IWL_24				0x0008
-#define IWL_32				0x000C
-#define FOR_I2S				0x0002
-#define FOR_DSP				0x0003
-
-// Sample rate control register
-#define CLKOUT_HALF			0x0080
-#define CLKIN_HALF			0x0040
-#define BOSR_384fs			0x0002 // BOSR_272fs when in USB mode
-#define USB_CLK_ON			0x0001
-#define SR_MASK                         0xf
-#define CLKOUT_SHIFT                    7
-#define CLKIN_SHIFT                     6
-#define SR_SHIFT                        2
-#define BOSR_SHIFT                      1
-
-// Digital interface register
-#define ACT_ON				0x0001
-
-#define TLV320AIC23ID1                  (0x1a)	// cs low
-#define TLV320AIC23ID2                  (0x1b)	// cs high
-
-void aic23_power_up(void);
-void aic23_power_down(void);
-
-#endif /* __ASM_ARCH_AIC23_H */
diff --git a/arch/arm/plat-omap/include/mach/board-h3.h b/arch/arm/plat-omap/include/mach/board-h3.h
index 14909dc..1888326 100644
--- a/arch/arm/plat-omap/include/mach/board-h3.h
+++ b/arch/arm/plat-omap/include/mach/board-h3.h
@@ -30,7 +30,9 @@
 /* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
 #define OMAP1710_ETHR_START		0x04000300
 
+#define H3_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
+#	define H3_TPS_GPIO_MMC_PWR_EN	(H3_TPS_GPIO_BASE + 4)
+
 extern void h3_mmc_init(void);
-extern void h3_mmc_slot_cover_handler(void *arg, int state);
 
 #endif /*  __ASM_ARCH_OMAP_H3_H */
diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h
index 04e68e8..8d9dfe3 100644
--- a/arch/arm/plat-omap/include/mach/gpio.h
+++ b/arch/arm/plat-omap/include/mach/gpio.h
@@ -87,16 +87,6 @@
 #include <linux/errno.h>
 #include <asm-generic/gpio.h>
 
-static inline int omap_request_gpio(int gpio)
-{
-	return gpio_request(gpio, "FIXME");
-}
-
-static inline void omap_free_gpio(int gpio)
-{
-	gpio_free(gpio);
-}
-
 static inline int gpio_get_value(unsigned gpio)
 {
 	return __gpio_get_value(gpio);
diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index 6a0d1a0..eef873d 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -87,6 +87,10 @@
 #define OMAP_MCBSP_REG_XCERG	0x3A
 #define OMAP_MCBSP_REG_XCERH	0x3C
 
+/* Dummy defines, these are not available on omap1 */
+#define OMAP_MCBSP_REG_XCCR	0x00
+#define OMAP_MCBSP_REG_RCCR	0x00
+
 #define AUDIO_MCBSP_DATAWRITE	(OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1)
 #define AUDIO_MCBSP_DATAREAD	(OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1)
 
@@ -231,11 +235,16 @@
 #define XPBBLK(value)		((value)<<7)	/* Bits 7:8 */
 
 /*********************** McBSP XCCR bit definitions *************************/
+#define EXTCLKGATE		0x8000
+#define PPCONNECT		0x4000
+#define DXENDLY(value)		((value)<<12)	/* Bits 12:13 */
+#define XFULL_CYCLE		0x0800
 #define DILB			0x0020
 #define XDMAEN			0x0008
 #define XDISABLE		0x0001
 
 /********************** McBSP RCCR bit definitions *************************/
+#define RFULL_CYCLE		0x0800
 #define RDMAEN			0x0008
 #define RDISABLE		0x0001
 
@@ -267,6 +276,8 @@
 	u16 rcerh;
 	u16 xcerg;
 	u16 xcerh;
+	u16 xccr;
+	u16 rccr;
 };
 
 typedef enum {
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index af33fc7..f2401a8 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -173,6 +173,10 @@
 	OMAP_MCBSP_WRITE(io_base, MCR2, config->mcr2);
 	OMAP_MCBSP_WRITE(io_base, MCR1, config->mcr1);
 	OMAP_MCBSP_WRITE(io_base, PCR0, config->pcr0);
+	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+		OMAP_MCBSP_WRITE(io_base, XCCR, config->xccr);
+		OMAP_MCBSP_WRITE(io_base, RCCR, config->rccr);
+	}
 }
 EXPORT_SYMBOL(omap_mcbsp_config);
 
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index add0485..e278de6 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -431,15 +431,6 @@
 
 /*-------------------------------------------------------------------------*/
 
-#if	defined(CONFIG_USB_GADGET_OMAP) || \
-	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) || \
-	(defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG))
-static void usb_release(struct device *dev)
-{
-	/* normally not freed */
-}
-#endif
-
 #ifdef	CONFIG_USB_GADGET_OMAP
 
 static struct resource udc_resources[] = {
@@ -466,7 +457,6 @@
 	.name		= "omap_udc",
 	.id		= -1,
 	.dev = {
-		.release		= usb_release,
 		.dma_mask		= &udc_dmamask,
 		.coherent_dma_mask	= 0xffffffff,
 	},
@@ -497,7 +487,6 @@
 	.name			= "ohci",
 	.id			= -1,
 	.dev = {
-		.release		= usb_release,
 		.dma_mask		= &ohci_dmamask,
 		.coherent_dma_mask	= 0xffffffff,
 	},
@@ -524,9 +513,6 @@
 static struct platform_device otg_device = {
 	.name		= "omap_otg",
 	.id		= -1,
-	.dev = {
-		.release		= usb_release,
-	},
 	.num_resources	= ARRAY_SIZE(otg_resources),
 	.resource	= otg_resources,
 };
diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig
index 164e281..574aca9 100644
--- a/arch/avr32/configs/atngw100_defconfig
+++ b/arch/avr32/configs/atngw100_defconfig
@@ -644,8 +644,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_AT24=m
-# CONFIG_SENSORS_EEPROM is not set
+CONFIG_EEPROM_AT24=m
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -670,7 +670,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/avr32/configs/atngw100_evklcd100_defconfig b/arch/avr32/configs/atngw100_evklcd100_defconfig
index b0572d21..86a45b5 100644
--- a/arch/avr32/configs/atngw100_evklcd100_defconfig
+++ b/arch/avr32/configs/atngw100_evklcd100_defconfig
@@ -671,7 +671,7 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -699,7 +699,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_HAVE_GPIO_LIB=y
diff --git a/arch/avr32/configs/atngw100_evklcd101_defconfig b/arch/avr32/configs/atngw100_evklcd101_defconfig
index c5b898d..a96b68e 100644
--- a/arch/avr32/configs/atngw100_evklcd101_defconfig
+++ b/arch/avr32/configs/atngw100_evklcd101_defconfig
@@ -671,7 +671,7 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -699,7 +699,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_HAVE_GPIO_LIB=y
diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig
index c9dc648..0abe90a 100644
--- a/arch/avr32/configs/atstk1002_defconfig
+++ b/arch/avr32/configs/atstk1002_defconfig
@@ -663,8 +663,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_AT24=m
-# CONFIG_SENSORS_EEPROM is not set
+CONFIG_EEPROM_AT24=m
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -689,7 +689,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/avr32/configs/atstk1003_defconfig b/arch/avr32/configs/atstk1003_defconfig
index 29ea132..101972f 100644
--- a/arch/avr32/configs/atstk1003_defconfig
+++ b/arch/avr32/configs/atstk1003_defconfig
@@ -611,8 +611,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_AT24=m
-# CONFIG_SENSORS_EEPROM is not set
+CONFIG_EEPROM_AT24=m
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -637,7 +637,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/avr32/configs/atstk1004_defconfig b/arch/avr32/configs/atstk1004_defconfig
index 69e6c0d..518f789 100644
--- a/arch/avr32/configs/atstk1004_defconfig
+++ b/arch/avr32/configs/atstk1004_defconfig
@@ -394,7 +394,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/avr32/configs/atstk1006_defconfig b/arch/avr32/configs/atstk1006_defconfig
index 361c31c..c1603c4 100644
--- a/arch/avr32/configs/atstk1006_defconfig
+++ b/arch/avr32/configs/atstk1006_defconfig
@@ -684,8 +684,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -710,7 +710,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/avr32/configs/favr-32_defconfig b/arch/avr32/configs/favr-32_defconfig
index e2bd998..4c3ac06 100644
--- a/arch/avr32/configs/favr-32_defconfig
+++ b/arch/avr32/configs/favr-32_defconfig
@@ -633,8 +633,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -659,7 +659,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/avr32/configs/hammerhead_defconfig b/arch/avr32/configs/hammerhead_defconfig
index 0d3d298..3970fcc 100644
--- a/arch/avr32/configs/hammerhead_defconfig
+++ b/arch/avr32/configs/hammerhead_defconfig
@@ -716,8 +716,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -742,7 +742,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/avr32/configs/mimc200_defconfig b/arch/avr32/configs/mimc200_defconfig
index 981e4f8..1a58ffb 100644
--- a/arch/avr32/configs/mimc200_defconfig
+++ b/arch/avr32/configs/mimc200_defconfig
@@ -565,8 +565,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_AT24=y
-# CONFIG_SENSORS_EEPROM is not set
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -592,7 +592,7 @@
 #
 # SPI Protocol Masters
 #
-CONFIG_SPI_AT25=y
+CONFIG_EEPROM_AT25=y
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/avr32/include/asm/Kbuild b/arch/avr32/include/asm/Kbuild
index 219822c..3136628 100644
--- a/arch/avr32/include/asm/Kbuild
+++ b/arch/avr32/include/asm/Kbuild
@@ -1,4 +1,3 @@
 include include/asm-generic/Kbuild.asm
 
-header-y	+= swab.h
 header-y	+= cachectl.h
diff --git a/arch/avr32/include/asm/byteorder.h b/arch/avr32/include/asm/byteorder.h
index 2aba64b..50abc21 100644
--- a/arch/avr32/include/asm/byteorder.h
+++ b/arch/avr32/include/asm/byteorder.h
@@ -4,7 +4,6 @@
 #ifndef __ASM_AVR32_BYTEORDER_H
 #define __ASM_AVR32_BYTEORDER_H
 
-#include <asm/swab.h>
 #include <linux/byteorder/big_endian.h>
 
 #endif /* __ASM_AVR32_BYTEORDER_H */
diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig
index e0b3f24..defb978 100644
--- a/arch/blackfin/configs/BF518F-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig
@@ -746,9 +746,9 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
+# CONFIG_EEPROM_AT24 is not set
 # CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig
index 69f66c3..992424f 100644
--- a/arch/blackfin/configs/BF526-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF526-EZBRD_defconfig
@@ -793,9 +793,9 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
+# CONFIG_EEPROM_AT24 is not set
 # CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -820,7 +820,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index f92668a..21e3c1a 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -837,9 +837,9 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
+# CONFIG_EEPROM_AT24 is not set
 # CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -864,7 +864,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
index 92afd98..0bdf20a 100644
--- a/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -719,7 +719,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index 49eabb4..2f747d6 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -743,9 +743,9 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
+# CONFIG_EEPROM_AT24 is not set
 # CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -770,7 +770,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
index 332142f..8b0a812 100644
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -794,9 +794,9 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
+# CONFIG_EEPROM_AT24 is not set
 CONFIG_SENSORS_AD5252=m
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -821,7 +821,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig
index ed15934..a1f766b 100644
--- a/arch/blackfin/configs/BF538-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF538-EZKIT_defconfig
@@ -796,9 +796,9 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
+# CONFIG_EEPROM_AT24 is not set
 # CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -823,7 +823,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index d4ed9ce..cd2da6b 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -928,9 +928,9 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
+# CONFIG_EEPROM_AT24 is not set
 # CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -955,7 +955,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
index 1ecb7a3..b398ca2 100644
--- a/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -756,7 +756,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig
index 9683b2e..3a20e28 100644
--- a/arch/blackfin/configs/BlackStamp_defconfig
+++ b/arch/blackfin/configs/BlackStamp_defconfig
@@ -691,7 +691,7 @@
 #
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -713,7 +713,7 @@
 #
 # SPI Protocol Masters
 #
-CONFIG_SPI_AT25=y
+CONFIG_EEPROM_AT25=y
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig
index a041e7e..9514694 100644
--- a/arch/blackfin/configs/CM-BF527_defconfig
+++ b/arch/blackfin/configs/CM-BF527_defconfig
@@ -715,7 +715,7 @@
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -742,7 +742,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig
index efd68bc..efe9741 100644
--- a/arch/blackfin/configs/CM-BF548_defconfig
+++ b/arch/blackfin/configs/CM-BF548_defconfig
@@ -798,7 +798,7 @@
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8575 is not set
 # CONFIG_SENSORS_PCA9543 is not set
@@ -826,7 +826,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig
index 5d3901d..bd553da 100644
--- a/arch/blackfin/configs/H8606_defconfig
+++ b/arch/blackfin/configs/H8606_defconfig
@@ -750,7 +750,7 @@
 #
 # SPI Protocol Masters
 #
-CONFIG_SPI_AT25=y
+CONFIG_EEPROM_AT25=y
 CONFIG_SPI_SPIDEV=y
 
 #
diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig
index e66f5da..eae83b5 100644
--- a/arch/blackfin/configs/IP0X_defconfig
+++ b/arch/blackfin/configs/IP0X_defconfig
@@ -803,7 +803,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 
 #
diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig
index ce5dde9d..ad09670 100644
--- a/arch/blackfin/configs/PNAV-10_defconfig
+++ b/arch/blackfin/configs/PNAV-10_defconfig
@@ -755,9 +755,9 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
+# CONFIG_EEPROM_AT24 is not set
 # CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 CONFIG_SENSORS_PCF8574=m
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -781,7 +781,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig
index 7c8250d..fa580af 100644
--- a/arch/blackfin/configs/SRV1_defconfig
+++ b/arch/blackfin/configs/SRV1_defconfig
@@ -798,7 +798,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8575 is not set
 # CONFIG_SENSORS_PCA9543 is not set
@@ -826,7 +826,7 @@
 #
 # SPI Protocol Masters
 #
-CONFIG_SPI_AT25=m
+CONFIG_EEPROM_AT25=m
 # CONFIG_SPI_SPIDEV is not set
 
 #
diff --git a/arch/blackfin/configs/TCM-BF537_defconfig b/arch/blackfin/configs/TCM-BF537_defconfig
index 9af522c..97a1f1d 100644
--- a/arch/blackfin/configs/TCM-BF537_defconfig
+++ b/arch/blackfin/configs/TCM-BF537_defconfig
@@ -533,7 +533,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
diff --git a/arch/blackfin/include/asm/Kbuild b/arch/blackfin/include/asm/Kbuild
index d0d1ac4..606ecfd 100644
--- a/arch/blackfin/include/asm/Kbuild
+++ b/arch/blackfin/include/asm/Kbuild
@@ -1,4 +1,3 @@
 include include/asm-generic/Kbuild.asm
 
 unifdef-y += fixed_code.h
-unifdef-y += swab.h
diff --git a/arch/blackfin/include/asm/byteorder.h b/arch/blackfin/include/asm/byteorder.h
index b9e797a..3e69106 100644
--- a/arch/blackfin/include/asm/byteorder.h
+++ b/arch/blackfin/include/asm/byteorder.h
@@ -1,7 +1,6 @@
 #ifndef _BLACKFIN_BYTEORDER_H
 #define _BLACKFIN_BYTEORDER_H
 
-#include <asm/swab.h>
 #include <linux/byteorder/little_endian.h>
 
 #endif				/* _BLACKFIN_BYTEORDER_H */
diff --git a/arch/cris/arch-v10/kernel/entry.S b/arch/cris/arch-v10/kernel/entry.S
index ed171d3..72f5cd3 100644
--- a/arch/cris/arch-v10/kernel/entry.S
+++ b/arch/cris/arch-v10/kernel/entry.S
@@ -691,7 +691,7 @@
 	.long sys_uselib
 	.long sys_swapon
 	.long sys_reboot
-	.long old_readdir
+	.long sys_old_readdir
 	.long old_mmap		/* 90 */
 	.long sys_munmap
 	.long sys_truncate
diff --git a/arch/cris/arch-v32/kernel/entry.S b/arch/cris/arch-v32/kernel/entry.S
index 7f6f93e..5e674c8 100644
--- a/arch/cris/arch-v32/kernel/entry.S
+++ b/arch/cris/arch-v32/kernel/entry.S
@@ -614,7 +614,7 @@
 	.long sys_uselib
 	.long sys_swapon
 	.long sys_reboot
-	.long old_readdir
+	.long sys_old_readdir
 	.long old_mmap		/* 90 */
 	.long sys_munmap
 	.long sys_truncate
diff --git a/arch/cris/include/arch-v10/arch/byteorder.h b/arch/cris/include/arch-v10/arch/byteorder.h
deleted file mode 100644
index 255b646..0000000
--- a/arch/cris/include/arch-v10/arch/byteorder.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef _CRIS_ARCH_BYTEORDER_H
-#define _CRIS_ARCH_BYTEORDER_H
-
-#include <asm/types.h>
-#include <linux/compiler.h>
-
-/* we just define these two (as we can do the swap in a single
- * asm instruction in CRIS) and the arch-independent files will put
- * them together into ntohl etc.
- */
-
-static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
-{
-	__asm__ ("swapwb %0" : "=r" (x) : "0" (x));
-  
-	return(x);
-}
-
-static inline __attribute_const__ __u16 ___arch__swab16(__u16 x)
-{
-	__asm__ ("swapb %0" : "=r" (x) : "0" (x));
-	
-	return(x);
-}
-
-#endif
diff --git a/arch/cris/include/arch-v10/arch/swab.h b/arch/cris/include/arch-v10/arch/swab.h
new file mode 100644
index 0000000..e4e847d
--- /dev/null
+++ b/arch/cris/include/arch-v10/arch/swab.h
@@ -0,0 +1,30 @@
+#ifndef _CRIS_ARCH_SWAB_H
+#define _CRIS_ARCH_SWAB_H
+
+#include <asm/types.h>
+#include <linux/compiler.h>
+
+#define __SWAB_64_THRU_32__
+
+/* we just define these two (as we can do the swap in a single
+ * asm instruction in CRIS) and the arch-independent files will put
+ * them together into ntohl etc.
+ */
+
+static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
+{
+	__asm__ ("swapwb %0" : "=r" (x) : "0" (x));
+
+	return(x);
+}
+#define __arch_swab32 __arch_swab32
+
+static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
+{
+	__asm__ ("swapb %0" : "=r" (x) : "0" (x));
+
+	return(x);
+}
+#define __arch_swab16 __arch_swab16
+
+#endif
diff --git a/arch/cris/include/arch-v32/arch/byteorder.h b/arch/cris/include/arch-v32/arch/byteorder.h
deleted file mode 100644
index 6ef8fb4..0000000
--- a/arch/cris/include/arch-v32/arch/byteorder.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _ASM_CRIS_ARCH_BYTEORDER_H
-#define _ASM_CRIS_ARCH_BYTEORDER_H
-
-#include <asm/types.h>
-
-static inline __const__ __u32
-___arch__swab32(__u32 x)
-{
-	__asm__ __volatile__ ("swapwb %0" : "=r" (x) : "0" (x));
-	return (x);
-}
-
-static inline __const__ __u16
-___arch__swab16(__u16 x)
-{
-	__asm__ __volatile__ ("swapb %0" : "=r" (x) : "0" (x));
-	return (x);
-}
-
-#endif /* _ASM_CRIS_ARCH_BYTEORDER_H */
diff --git a/arch/cris/include/arch-v32/arch/swab.h b/arch/cris/include/arch-v32/arch/swab.h
new file mode 100644
index 0000000..9a4ea5e
--- /dev/null
+++ b/arch/cris/include/arch-v32/arch/swab.h
@@ -0,0 +1,24 @@
+#ifndef _ASM_CRIS_ARCH_SWAB_H
+#define _ASM_CRIS_ARCH_SWAB_H
+
+#include <asm/types.h>
+
+#define __SWAB_64_THRU_32__
+
+static inline __const__ __u32
+__arch_swab32(__u32 x)
+{
+	__asm__ __volatile__ ("swapwb %0" : "=r" (x) : "0" (x));
+	return (x);
+}
+#define __arch_swab32 __arch_swab32
+
+static inline __const__ __u16
+__arch_swab16(__u16 x)
+{
+	__asm__ __volatile__ ("swapb %0" : "=r" (x) : "0" (x));
+	return (x);
+}
+#define __arch_swab16 __arch_swab16
+
+#endif /* _ASM_CRIS_ARCH_SWAB_H */
diff --git a/arch/cris/include/asm/byteorder.h b/arch/cris/include/asm/byteorder.h
index cc8e418..bcd1897 100644
--- a/arch/cris/include/asm/byteorder.h
+++ b/arch/cris/include/asm/byteorder.h
@@ -1,25 +1,6 @@
 #ifndef _CRIS_BYTEORDER_H
 #define _CRIS_BYTEORDER_H
 
-#ifdef __GNUC__
-
-#ifdef __KERNEL__
-#include <arch/byteorder.h>
-
-/* defines are necessary because the other files detect the presence
- * of a defined __arch_swab32, not an inline
- */
-#define __arch__swab32(x) ___arch__swab32(x)
-#define __arch__swab16(x) ___arch__swab16(x)
-#endif /* __KERNEL__ */
-
-#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-#  define __BYTEORDER_HAS_U64__
-#  define __SWAB_64_THRU_32__
-#endif
-
-#endif /* __GNUC__ */
-
 #include <linux/byteorder/little_endian.h>
 
 #endif
diff --git a/arch/cris/include/asm/swab.h b/arch/cris/include/asm/swab.h
new file mode 100644
index 0000000..80668e8
--- /dev/null
+++ b/arch/cris/include/asm/swab.h
@@ -0,0 +1,8 @@
+#ifndef _CRIS_SWAB_H
+#define _CRIS_SWAB_H
+
+#ifdef __KERNEL__
+#include <arch/swab.h>
+#endif /* __KERNEL__ */
+
+#endif /* _CRIS_SWAB_H */
diff --git a/arch/h8300/include/asm/Kbuild b/arch/h8300/include/asm/Kbuild
index 27b108a..c68e168 100644
--- a/arch/h8300/include/asm/Kbuild
+++ b/arch/h8300/include/asm/Kbuild
@@ -1,2 +1 @@
 include include/asm-generic/Kbuild.asm
-unifdef-y += swab.h
diff --git a/arch/h8300/include/asm/byteorder.h b/arch/h8300/include/asm/byteorder.h
index c36b80a..13539da 100644
--- a/arch/h8300/include/asm/byteorder.h
+++ b/arch/h8300/include/asm/byteorder.h
@@ -1,7 +1,6 @@
 #ifndef _H8300_BYTEORDER_H
 #define _H8300_BYTEORDER_H
 
-#include <asm/swab.h>
 #include <linux/byteorder/big_endian.h>
 
 #endif /* _H8300_BYTEORDER_H */
diff --git a/arch/h8300/kernel/syscalls.S b/arch/h8300/kernel/syscalls.S
index 54e21c3..4eb67fa 100644
--- a/arch/h8300/kernel/syscalls.S
+++ b/arch/h8300/kernel/syscalls.S
@@ -103,7 +103,7 @@
 	.long SYMBOL_NAME(sys_uselib)
 	.long SYMBOL_NAME(sys_swapon)
 	.long SYMBOL_NAME(sys_reboot)
-	.long SYMBOL_NAME(old_readdir)
+	.long SYMBOL_NAME(sys_old_readdir)
 	.long SYMBOL_NAME(old_mmap)		/* 90 */
 	.long SYMBOL_NAME(sys_munmap)
 	.long SYMBOL_NAME(sys_truncate)
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 3d31636..6183aec 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -17,6 +17,7 @@
 	select ACPI if (!IA64_HP_SIM)
 	select PM if (!IA64_HP_SIM)
 	select ARCH_SUPPORTS_MSI
+	select HAVE_UNSTABLE_SCHED_CLOCK
 	select HAVE_IDE
 	select HAVE_OPROFILE
 	select HAVE_KPROBES
diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig
index 6dd8655..ace4109 100644
--- a/arch/ia64/configs/bigsur_defconfig
+++ b/arch/ia64/configs/bigsur_defconfig
@@ -752,7 +752,7 @@
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig
index 27eb676..a109db3 100644
--- a/arch/ia64/configs/generic_defconfig
+++ b/arch/ia64/configs/generic_defconfig
@@ -578,7 +578,7 @@
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
+CONFIG_SATA_VITESSE=y
 # CONFIG_SATA_INIC162X is not set
 # CONFIG_PATA_ACPI is not set
 # CONFIG_PATA_ALI is not set
diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig
index 0a06b13..514f063 100644
--- a/arch/ia64/configs/zx1_defconfig
+++ b/arch/ia64/configs/zx1_defconfig
@@ -841,7 +841,7 @@
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/ia64/ia32/ia32_entry.S b/arch/ia64/ia32/ia32_entry.S
index a8cf199..a46f839 100644
--- a/arch/ia64/ia32/ia32_entry.S
+++ b/arch/ia64/ia32/ia32_entry.S
@@ -220,7 +220,7 @@
 	data8 sys_mkdir
 	data8 sys_rmdir		  /* 40 */
 	data8 sys_dup
-	data8 sys_pipe
+	data8 sys_ia64_pipe
 	data8 compat_sys_times
 	data8 sys_ni_syscall	  /* old prof syscall holder */
 	data8 sys32_brk		  /* 45 */
diff --git a/arch/ia64/include/asm/Kbuild b/arch/ia64/include/asm/Kbuild
index 3b25bd9..ccbe8ae 100644
--- a/arch/ia64/include/asm/Kbuild
+++ b/arch/ia64/include/asm/Kbuild
@@ -14,4 +14,3 @@
 unifdef-y += intrinsics.h
 unifdef-y += perfmon.h
 unifdef-y += ustack.h
-unifdef-y += swab.h
diff --git a/arch/ia64/include/asm/byteorder.h b/arch/ia64/include/asm/byteorder.h
index 0f84c5c..a8dd735 100644
--- a/arch/ia64/include/asm/byteorder.h
+++ b/arch/ia64/include/asm/byteorder.h
@@ -1,7 +1,6 @@
 #ifndef _ASM_IA64_BYTEORDER_H
 #define _ASM_IA64_BYTEORDER_H
 
-#include <asm/swab.h>
 #include <linux/byteorder/little_endian.h>
 
 #endif /* _ASM_IA64_BYTEORDER_H */
diff --git a/arch/ia64/include/asm/dma-mapping.h b/arch/ia64/include/asm/dma-mapping.h
index bbab7e2..1f912d9 100644
--- a/arch/ia64/include/asm/dma-mapping.h
+++ b/arch/ia64/include/asm/dma-mapping.h
@@ -9,6 +9,8 @@
 #include <linux/scatterlist.h>
 #include <asm/swiotlb.h>
 
+#define ARCH_HAS_DMA_GET_REQUIRED_MASK
+
 struct dma_mapping_ops {
 	int             (*mapping_error)(struct device *dev,
 					 dma_addr_t dma_addr);
diff --git a/arch/ia64/include/asm/machvec.h b/arch/ia64/include/asm/machvec.h
index 59c17e4..fe87b21 100644
--- a/arch/ia64/include/asm/machvec.h
+++ b/arch/ia64/include/asm/machvec.h
@@ -62,6 +62,7 @@
 typedef void ia64_mv_dma_unmap_single_attrs (struct device *, dma_addr_t, size_t, int, struct dma_attrs *);
 typedef int ia64_mv_dma_map_sg_attrs (struct device *, struct scatterlist *, int, int, struct dma_attrs *);
 typedef void ia64_mv_dma_unmap_sg_attrs (struct device *, struct scatterlist *, int, int, struct dma_attrs *);
+typedef u64 ia64_mv_dma_get_required_mask (struct device *);
 
 /*
  * WARNING: The legacy I/O space is _architected_.  Platforms are
@@ -159,6 +160,7 @@
 #  define platform_dma_sync_sg_for_device ia64_mv.dma_sync_sg_for_device
 #  define platform_dma_mapping_error		ia64_mv.dma_mapping_error
 #  define platform_dma_supported	ia64_mv.dma_supported
+#  define platform_dma_get_required_mask ia64_mv.dma_get_required_mask
 #  define platform_irq_to_vector	ia64_mv.irq_to_vector
 #  define platform_local_vector_to_irq	ia64_mv.local_vector_to_irq
 #  define platform_pci_get_legacy_mem	ia64_mv.pci_get_legacy_mem
@@ -213,6 +215,7 @@
 	ia64_mv_dma_sync_sg_for_device *dma_sync_sg_for_device;
 	ia64_mv_dma_mapping_error *dma_mapping_error;
 	ia64_mv_dma_supported *dma_supported;
+	ia64_mv_dma_get_required_mask *dma_get_required_mask;
 	ia64_mv_irq_to_vector *irq_to_vector;
 	ia64_mv_local_vector_to_irq *local_vector_to_irq;
 	ia64_mv_pci_get_legacy_mem_t *pci_get_legacy_mem;
@@ -263,6 +266,7 @@
 	platform_dma_sync_sg_for_device,	\
 	platform_dma_mapping_error,			\
 	platform_dma_supported,			\
+	platform_dma_get_required_mask,		\
 	platform_irq_to_vector,			\
 	platform_local_vector_to_irq,		\
 	platform_pci_get_legacy_mem,		\
@@ -366,6 +370,9 @@
 #ifndef platform_dma_supported
 # define  platform_dma_supported	swiotlb_dma_supported
 #endif
+#ifndef platform_dma_get_required_mask
+# define  platform_dma_get_required_mask	ia64_dma_get_required_mask
+#endif
 #ifndef platform_irq_to_vector
 # define platform_irq_to_vector		__ia64_irq_to_vector
 #endif
diff --git a/arch/ia64/include/asm/machvec_init.h b/arch/ia64/include/asm/machvec_init.h
index ef964b2..37a4698 100644
--- a/arch/ia64/include/asm/machvec_init.h
+++ b/arch/ia64/include/asm/machvec_init.h
@@ -3,6 +3,7 @@
 
 extern ia64_mv_send_ipi_t ia64_send_ipi;
 extern ia64_mv_global_tlb_purge_t ia64_global_tlb_purge;
+extern ia64_mv_dma_get_required_mask ia64_dma_get_required_mask;
 extern ia64_mv_irq_to_vector __ia64_irq_to_vector;
 extern ia64_mv_local_vector_to_irq __ia64_local_vector_to_irq;
 extern ia64_mv_pci_get_legacy_mem_t ia64_pci_get_legacy_mem;
diff --git a/arch/ia64/include/asm/machvec_sn2.h b/arch/ia64/include/asm/machvec_sn2.h
index 781308e..f1a6e0d 100644
--- a/arch/ia64/include/asm/machvec_sn2.h
+++ b/arch/ia64/include/asm/machvec_sn2.h
@@ -67,6 +67,7 @@
 extern ia64_mv_dma_sync_sg_for_device	sn_dma_sync_sg_for_device;
 extern ia64_mv_dma_mapping_error	sn_dma_mapping_error;
 extern ia64_mv_dma_supported		sn_dma_supported;
+extern ia64_mv_dma_get_required_mask	sn_dma_get_required_mask;
 extern ia64_mv_migrate_t		sn_migrate;
 extern ia64_mv_kernel_launch_event_t	sn_kernel_launch_event;
 extern ia64_mv_setup_msi_irq_t		sn_setup_msi_irq;
@@ -123,6 +124,7 @@
 #define platform_dma_sync_sg_for_device	sn_dma_sync_sg_for_device
 #define platform_dma_mapping_error		sn_dma_mapping_error
 #define platform_dma_supported		sn_dma_supported
+#define platform_dma_get_required_mask	sn_dma_get_required_mask
 #define platform_migrate		sn_migrate
 #define platform_kernel_launch_event    sn_kernel_launch_event
 #ifdef CONFIG_PCI_MSI
diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h
index f791576..9015979 100644
--- a/arch/ia64/include/asm/unistd.h
+++ b/arch/ia64/include/asm/unistd.h
@@ -364,7 +364,7 @@
 struct sigaction;
 long sys_execve(char __user *filename, char __user * __user *argv,
 			   char __user * __user *envp, struct pt_regs *regs);
-asmlinkage long sys_pipe(void);
+asmlinkage long sys_ia64_pipe(void);
 asmlinkage long sys_rt_sigaction(int sig,
 				 const struct sigaction __user *act,
 				 struct sigaction __user *oact,
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index d435f4a..e5341e2 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -1442,7 +1442,7 @@
 	data8 sys_mkdir				// 1055
 	data8 sys_rmdir
 	data8 sys_dup
-	data8 sys_pipe
+	data8 sys_ia64_pipe
 	data8 sys_times
 	data8 ia64_brk				// 1060
 	data8 sys_setgid
diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c
index f90be51..9adac44 100644
--- a/arch/ia64/kernel/kprobes.c
+++ b/arch/ia64/kernel/kprobes.c
@@ -870,7 +870,7 @@
 		return 1;
 
 ss_probe:
-#if !defined(CONFIG_PREEMPT) || defined(CONFIG_PM)
+#if !defined(CONFIG_PREEMPT) || defined(CONFIG_FREEZER)
 	if (p->ainsn.inst_flag == INST_FLAG_BOOSTABLE && !p->post_handler) {
 		/* Boost up -- we can execute copied instructions directly */
 		ia64_psr(regs)->ri = p->ainsn.slot;
diff --git a/arch/ia64/kernel/sys_ia64.c b/arch/ia64/kernel/sys_ia64.c
index bcbb6d87..92ed83f 100644
--- a/arch/ia64/kernel/sys_ia64.c
+++ b/arch/ia64/kernel/sys_ia64.c
@@ -154,7 +154,7 @@
  * and r9) as this is faster than doing a copy_to_user().
  */
 asmlinkage long
-sys_pipe (void)
+sys_ia64_pipe (void)
 {
 	struct pt_regs *regs = task_pt_regs(current);
 	int fd[2];
diff --git a/arch/ia64/kernel/unaligned.c b/arch/ia64/kernel/unaligned.c
index ff0e7c1..6db0859 100644
--- a/arch/ia64/kernel/unaligned.c
+++ b/arch/ia64/kernel/unaligned.c
@@ -59,6 +59,7 @@
  *  (i.e. don't allow attacker to fill up logs with unaligned accesses).
  */
 int no_unaligned_warning;
+int unaligned_dump_stack;
 static int noprint_warning;
 
 /*
@@ -1371,9 +1372,12 @@
 			}
 		}
 	} else {
-		if (within_logging_rate_limit())
+		if (within_logging_rate_limit()) {
 			printk(KERN_WARNING "kernel unaligned access to 0x%016lx, ip=0x%016lx\n",
 			       ifa, regs->cr_iip + ipsr->ri);
+			if (unaligned_dump_stack)
+				dump_stack();
+		}
 		set_fs(KERNEL_DS);
 	}
 
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index 211fcfd..61f1af5 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -19,6 +19,7 @@
 #include <linux/ioport.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
+#include <linux/bootmem.h>
 
 #include <asm/machvec.h>
 #include <asm/page.h>
@@ -748,6 +749,32 @@
 	pci_cache_line_size = (1 << cci.pcci_line_size) / 4;
 }
 
+u64 ia64_dma_get_required_mask(struct device *dev)
+{
+	u32 low_totalram = ((max_pfn - 1) << PAGE_SHIFT);
+	u32 high_totalram = ((max_pfn - 1) >> (32 - PAGE_SHIFT));
+	u64 mask;
+
+	if (!high_totalram) {
+		/* convert to mask just covering totalram */
+		low_totalram = (1 << (fls(low_totalram) - 1));
+		low_totalram += low_totalram - 1;
+		mask = low_totalram;
+	} else {
+		high_totalram = (1 << (fls(high_totalram) - 1));
+		high_totalram += high_totalram - 1;
+		mask = (((u64)high_totalram) << 32) + 0xffffffff;
+	}
+	return mask;
+}
+EXPORT_SYMBOL_GPL(ia64_dma_get_required_mask);
+
+u64 dma_get_required_mask(struct device *dev)
+{
+	return platform_dma_get_required_mask(dev);
+}
+EXPORT_SYMBOL_GPL(dma_get_required_mask);
+
 static int __init pcibios_init(void)
 {
 	set_pci_cacheline_size();
diff --git a/arch/ia64/sn/pci/pci_dma.c b/arch/ia64/sn/pci/pci_dma.c
index 53ebb64..863f5017 100644
--- a/arch/ia64/sn/pci/pci_dma.c
+++ b/arch/ia64/sn/pci/pci_dma.c
@@ -356,6 +356,12 @@
 }
 EXPORT_SYMBOL(sn_dma_mapping_error);
 
+u64 sn_dma_get_required_mask(struct device *dev)
+{
+	return DMA_64BIT_MASK;
+}
+EXPORT_SYMBOL_GPL(sn_dma_get_required_mask);
+
 char *sn_pci_get_legacy_mem(struct pci_bus *bus)
 {
 	if (!SN_PCIBUS_BUSSOFT(bus))
diff --git a/arch/ia64/xen/time.c b/arch/ia64/xen/time.c
index d15a94c..68d6204 100644
--- a/arch/ia64/xen/time.c
+++ b/arch/ia64/xen/time.c
@@ -129,8 +129,8 @@
 		blocked = stolentick;
 
 	if (stolen > 0 || blocked > 0) {
-		account_steal_time(NULL, jiffies_to_cputime(stolen));
-		account_steal_time(idle_task(cpu), jiffies_to_cputime(blocked));
+		account_steal_ticks(stolen);
+		account_idle_ticks(blocked);
 		run_local_timers();
 
 		if (rcu_pending(cpu))
diff --git a/arch/m32r/configs/m32104ut_defconfig b/arch/m32r/configs/m32104ut_defconfig
index 9b5af6c..6f54b00 100644
--- a/arch/m32r/configs/m32104ut_defconfig
+++ b/arch/m32r/configs/m32104ut_defconfig
@@ -621,7 +621,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/include/asm-m68k/Kbuild b/arch/m68k/include/asm/Kbuild
similarity index 75%
rename from include/asm-m68k/Kbuild
rename to arch/m68k/include/asm/Kbuild
index 52fd96b..1a922fa 100644
--- a/include/asm-m68k/Kbuild
+++ b/arch/m68k/include/asm/Kbuild
@@ -1,3 +1,2 @@
 include include/asm-generic/Kbuild.asm
 header-y += cachectl.h
-unifdef-y += swab.h
diff --git a/arch/m68knommu/include/asm/MC68328.h b/arch/m68k/include/asm/MC68328.h
similarity index 100%
rename from arch/m68knommu/include/asm/MC68328.h
rename to arch/m68k/include/asm/MC68328.h
diff --git a/arch/m68knommu/include/asm/MC68332.h b/arch/m68k/include/asm/MC68332.h
similarity index 100%
rename from arch/m68knommu/include/asm/MC68332.h
rename to arch/m68k/include/asm/MC68332.h
diff --git a/arch/m68knommu/include/asm/MC68EZ328.h b/arch/m68k/include/asm/MC68EZ328.h
similarity index 100%
rename from arch/m68knommu/include/asm/MC68EZ328.h
rename to arch/m68k/include/asm/MC68EZ328.h
diff --git a/arch/m68knommu/include/asm/MC68VZ328.h b/arch/m68k/include/asm/MC68VZ328.h
similarity index 100%
rename from arch/m68knommu/include/asm/MC68VZ328.h
rename to arch/m68k/include/asm/MC68VZ328.h
diff --git a/include/asm-m68k/a.out-core.h b/arch/m68k/include/asm/a.out-core.h
similarity index 100%
rename from include/asm-m68k/a.out-core.h
rename to arch/m68k/include/asm/a.out-core.h
diff --git a/include/asm-m68k/a.out.h b/arch/m68k/include/asm/a.out.h
similarity index 100%
rename from include/asm-m68k/a.out.h
rename to arch/m68k/include/asm/a.out.h
diff --git a/include/asm-m68k/adb_iop.h b/arch/m68k/include/asm/adb_iop.h
similarity index 100%
rename from include/asm-m68k/adb_iop.h
rename to arch/m68k/include/asm/adb_iop.h
diff --git a/include/asm-m68k/amigahw.h b/arch/m68k/include/asm/amigahw.h
similarity index 100%
rename from include/asm-m68k/amigahw.h
rename to arch/m68k/include/asm/amigahw.h
diff --git a/include/asm-m68k/amigaints.h b/arch/m68k/include/asm/amigaints.h
similarity index 100%
rename from include/asm-m68k/amigaints.h
rename to arch/m68k/include/asm/amigaints.h
diff --git a/include/asm-m68k/amigayle.h b/arch/m68k/include/asm/amigayle.h
similarity index 100%
rename from include/asm-m68k/amigayle.h
rename to arch/m68k/include/asm/amigayle.h
diff --git a/include/asm-m68k/amipcmcia.h b/arch/m68k/include/asm/amipcmcia.h
similarity index 100%
rename from include/asm-m68k/amipcmcia.h
rename to arch/m68k/include/asm/amipcmcia.h
diff --git a/arch/m68knommu/include/asm/anchor.h b/arch/m68k/include/asm/anchor.h
similarity index 100%
rename from arch/m68knommu/include/asm/anchor.h
rename to arch/m68k/include/asm/anchor.h
diff --git a/include/asm-m68k/apollodma.h b/arch/m68k/include/asm/apollodma.h
similarity index 100%
rename from include/asm-m68k/apollodma.h
rename to arch/m68k/include/asm/apollodma.h
diff --git a/include/asm-m68k/apollohw.h b/arch/m68k/include/asm/apollohw.h
similarity index 100%
rename from include/asm-m68k/apollohw.h
rename to arch/m68k/include/asm/apollohw.h
diff --git a/include/asm-m68k/atafd.h b/arch/m68k/include/asm/atafd.h
similarity index 100%
rename from include/asm-m68k/atafd.h
rename to arch/m68k/include/asm/atafd.h
diff --git a/include/asm-m68k/atafdreg.h b/arch/m68k/include/asm/atafdreg.h
similarity index 100%
rename from include/asm-m68k/atafdreg.h
rename to arch/m68k/include/asm/atafdreg.h
diff --git a/include/asm-m68k/atari_joystick.h b/arch/m68k/include/asm/atari_joystick.h
similarity index 100%
rename from include/asm-m68k/atari_joystick.h
rename to arch/m68k/include/asm/atari_joystick.h
diff --git a/include/asm-m68k/atari_stdma.h b/arch/m68k/include/asm/atari_stdma.h
similarity index 100%
rename from include/asm-m68k/atari_stdma.h
rename to arch/m68k/include/asm/atari_stdma.h
diff --git a/include/asm-m68k/atari_stram.h b/arch/m68k/include/asm/atari_stram.h
similarity index 100%
rename from include/asm-m68k/atari_stram.h
rename to arch/m68k/include/asm/atari_stram.h
diff --git a/include/asm-m68k/atarihw.h b/arch/m68k/include/asm/atarihw.h
similarity index 100%
rename from include/asm-m68k/atarihw.h
rename to arch/m68k/include/asm/atarihw.h
diff --git a/include/asm-m68k/atariints.h b/arch/m68k/include/asm/atariints.h
similarity index 100%
rename from include/asm-m68k/atariints.h
rename to arch/m68k/include/asm/atariints.h
diff --git a/include/asm-m68k/atarikb.h b/arch/m68k/include/asm/atarikb.h
similarity index 100%
rename from include/asm-m68k/atarikb.h
rename to arch/m68k/include/asm/atarikb.h
diff --git a/arch/m68k/include/asm/atomic.h b/arch/m68k/include/asm/atomic.h
new file mode 100644
index 0000000..8d29145
--- /dev/null
+++ b/arch/m68k/include/asm/atomic.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "atomic_no.h"
+#else
+#include "atomic_mm.h"
+#endif
diff --git a/include/asm-m68k/atomic.h b/arch/m68k/include/asm/atomic_mm.h
similarity index 100%
rename from include/asm-m68k/atomic.h
rename to arch/m68k/include/asm/atomic_mm.h
diff --git a/arch/m68knommu/include/asm/atomic.h b/arch/m68k/include/asm/atomic_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/atomic.h
rename to arch/m68k/include/asm/atomic_no.h
diff --git a/arch/m68knommu/include/asm/auxvec.h b/arch/m68k/include/asm/auxvec.h
similarity index 100%
rename from arch/m68knommu/include/asm/auxvec.h
rename to arch/m68k/include/asm/auxvec.h
diff --git a/arch/m68k/include/asm/bitops.h b/arch/m68k/include/asm/bitops.h
new file mode 100644
index 0000000..ce163ab
--- /dev/null
+++ b/arch/m68k/include/asm/bitops.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "bitops_no.h"
+#else
+#include "bitops_mm.h"
+#endif
diff --git a/include/asm-m68k/bitops.h b/arch/m68k/include/asm/bitops_mm.h
similarity index 100%
rename from include/asm-m68k/bitops.h
rename to arch/m68k/include/asm/bitops_mm.h
diff --git a/arch/m68knommu/include/asm/bitops.h b/arch/m68k/include/asm/bitops_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/bitops.h
rename to arch/m68k/include/asm/bitops_no.h
diff --git a/include/asm-m68k/blinken.h b/arch/m68k/include/asm/blinken.h
similarity index 100%
rename from include/asm-m68k/blinken.h
rename to arch/m68k/include/asm/blinken.h
diff --git a/arch/m68k/include/asm/bootinfo.h b/arch/m68k/include/asm/bootinfo.h
new file mode 100644
index 0000000..fedf3e3
--- /dev/null
+++ b/arch/m68k/include/asm/bootinfo.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "bootinfo_no.h"
+#else
+#include "bootinfo_mm.h"
+#endif
diff --git a/include/asm-m68k/bootinfo.h b/arch/m68k/include/asm/bootinfo_mm.h
similarity index 100%
rename from include/asm-m68k/bootinfo.h
rename to arch/m68k/include/asm/bootinfo_mm.h
diff --git a/arch/m68knommu/include/asm/bootinfo.h b/arch/m68k/include/asm/bootinfo_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/bootinfo.h
rename to arch/m68k/include/asm/bootinfo_no.h
diff --git a/arch/m68knommu/include/asm/bootstd.h b/arch/m68k/include/asm/bootstd.h
similarity index 100%
rename from arch/m68knommu/include/asm/bootstd.h
rename to arch/m68k/include/asm/bootstd.h
diff --git a/arch/m68k/include/asm/bug.h b/arch/m68k/include/asm/bug.h
new file mode 100644
index 0000000..997e094
--- /dev/null
+++ b/arch/m68k/include/asm/bug.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "bug_no.h"
+#else
+#include "bug_mm.h"
+#endif
diff --git a/include/asm-m68k/bug.h b/arch/m68k/include/asm/bug_mm.h
similarity index 100%
rename from include/asm-m68k/bug.h
rename to arch/m68k/include/asm/bug_mm.h
diff --git a/arch/m68knommu/include/asm/bug.h b/arch/m68k/include/asm/bug_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/bug.h
rename to arch/m68k/include/asm/bug_no.h
diff --git a/arch/m68k/include/asm/bugs.h b/arch/m68k/include/asm/bugs.h
new file mode 100644
index 0000000..01f047d
--- /dev/null
+++ b/arch/m68k/include/asm/bugs.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "bugs_no.h"
+#else
+#include "bugs_mm.h"
+#endif
diff --git a/include/asm-m68k/bugs.h b/arch/m68k/include/asm/bugs_mm.h
similarity index 100%
rename from include/asm-m68k/bugs.h
rename to arch/m68k/include/asm/bugs_mm.h
diff --git a/arch/m68knommu/include/asm/bugs.h b/arch/m68k/include/asm/bugs_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/bugs.h
rename to arch/m68k/include/asm/bugs_no.h
diff --git a/include/asm-m68k/bvme6000hw.h b/arch/m68k/include/asm/bvme6000hw.h
similarity index 100%
rename from include/asm-m68k/bvme6000hw.h
rename to arch/m68k/include/asm/bvme6000hw.h
diff --git a/include/asm-m68k/byteorder.h b/arch/m68k/include/asm/byteorder.h
similarity index 84%
rename from include/asm-m68k/byteorder.h
rename to arch/m68k/include/asm/byteorder.h
index 3008665..31b260a 100644
--- a/include/asm-m68k/byteorder.h
+++ b/arch/m68k/include/asm/byteorder.h
@@ -1,7 +1,6 @@
 #ifndef _M68K_BYTEORDER_H
 #define _M68K_BYTEORDER_H
 
-#include <asm/swab.h>
 #include <linux/byteorder/big_endian.h>
 
 #endif /* _M68K_BYTEORDER_H */
diff --git a/arch/m68k/include/asm/cache.h b/arch/m68k/include/asm/cache.h
new file mode 100644
index 0000000..599c29b
--- /dev/null
+++ b/arch/m68k/include/asm/cache.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "cache_no.h"
+#else
+#include "cache_mm.h"
+#endif
diff --git a/include/asm-m68k/cache.h b/arch/m68k/include/asm/cache_mm.h
similarity index 100%
rename from include/asm-m68k/cache.h
rename to arch/m68k/include/asm/cache_mm.h
diff --git a/arch/m68knommu/include/asm/cache.h b/arch/m68k/include/asm/cache_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/cache.h
rename to arch/m68k/include/asm/cache_no.h
diff --git a/include/asm-m68k/cachectl.h b/arch/m68k/include/asm/cachectl.h
similarity index 100%
rename from include/asm-m68k/cachectl.h
rename to arch/m68k/include/asm/cachectl.h
diff --git a/arch/m68k/include/asm/cacheflush.h b/arch/m68k/include/asm/cacheflush.h
new file mode 100644
index 0000000..a70d7319
--- /dev/null
+++ b/arch/m68k/include/asm/cacheflush.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "cacheflush_no.h"
+#else
+#include "cacheflush_mm.h"
+#endif
diff --git a/include/asm-m68k/cacheflush.h b/arch/m68k/include/asm/cacheflush_mm.h
similarity index 100%
rename from include/asm-m68k/cacheflush.h
rename to arch/m68k/include/asm/cacheflush_mm.h
diff --git a/arch/m68knommu/include/asm/cacheflush.h b/arch/m68k/include/asm/cacheflush_no.h
similarity index 89%
rename from arch/m68knommu/include/asm/cacheflush.h
rename to arch/m68k/include/asm/cacheflush_no.h
index 87e5dc04..c65f00a 100644
--- a/arch/m68knommu/include/asm/cacheflush.h
+++ b/arch/m68k/include/asm/cacheflush_no.h
@@ -51,13 +51,20 @@
 		"movec	%%d0,%%CACR\n\t"
 		: : : "d0", "a0" );
 #endif /* CONFIG_M5407 */
-#if defined(CONFIG_M527x) || defined(CONFIG_M528x)
+#if defined(CONFIG_M523x) || defined(CONFIG_M527x)
+	__asm__ __volatile__ (
+		"movel	#0x81400100, %%d0\n\t"
+		"movec	%%d0, %%CACR\n\t"
+		"nop\n\t"
+		: : : "d0" );
+#endif /* CONFIG_M523x || CONFIG_M527x */
+#if defined(CONFIG_M528x)
 	__asm__ __volatile__ (
 		"movel	#0x81000200, %%d0\n\t"
 		"movec	%%d0, %%CACR\n\t"
 		"nop\n\t"
 		: : : "d0" );
-#endif /* CONFIG_M527x || CONFIG_M528x */
+#endif /* CONFIG_M528x */
 #if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272)
 	__asm__ __volatile__ (
 		"movel	#0x81000100, %%d0\n\t"
diff --git a/arch/m68k/include/asm/checksum.h b/arch/m68k/include/asm/checksum.h
new file mode 100644
index 0000000..1cf5447
--- /dev/null
+++ b/arch/m68k/include/asm/checksum.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "checksum_no.h"
+#else
+#include "checksum_mm.h"
+#endif
diff --git a/include/asm-m68k/checksum.h b/arch/m68k/include/asm/checksum_mm.h
similarity index 100%
rename from include/asm-m68k/checksum.h
rename to arch/m68k/include/asm/checksum_mm.h
diff --git a/arch/m68knommu/include/asm/checksum.h b/arch/m68k/include/asm/checksum_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/checksum.h
rename to arch/m68k/include/asm/checksum_no.h
diff --git a/arch/m68knommu/include/asm/coldfire.h b/arch/m68k/include/asm/coldfire.h
similarity index 100%
rename from arch/m68knommu/include/asm/coldfire.h
rename to arch/m68k/include/asm/coldfire.h
diff --git a/arch/m68knommu/include/asm/commproc.h b/arch/m68k/include/asm/commproc.h
similarity index 100%
rename from arch/m68knommu/include/asm/commproc.h
rename to arch/m68k/include/asm/commproc.h
diff --git a/include/asm-m68k/contregs.h b/arch/m68k/include/asm/contregs.h
similarity index 100%
rename from include/asm-m68k/contregs.h
rename to arch/m68k/include/asm/contregs.h
diff --git a/include/asm-m68k/cputime.h b/arch/m68k/include/asm/cputime.h
similarity index 100%
rename from include/asm-m68k/cputime.h
rename to arch/m68k/include/asm/cputime.h
diff --git a/arch/m68k/include/asm/current.h b/arch/m68k/include/asm/current.h
new file mode 100644
index 0000000..51b056d
--- /dev/null
+++ b/arch/m68k/include/asm/current.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "current_no.h"
+#else
+#include "current_mm.h"
+#endif
diff --git a/include/asm-m68k/current.h b/arch/m68k/include/asm/current_mm.h
similarity index 100%
rename from include/asm-m68k/current.h
rename to arch/m68k/include/asm/current_mm.h
diff --git a/arch/m68knommu/include/asm/current.h b/arch/m68k/include/asm/current_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/current.h
rename to arch/m68k/include/asm/current_no.h
diff --git a/arch/m68knommu/include/asm/dbg.h b/arch/m68k/include/asm/dbg.h
similarity index 100%
rename from arch/m68knommu/include/asm/dbg.h
rename to arch/m68k/include/asm/dbg.h
diff --git a/arch/m68k/include/asm/delay.h b/arch/m68k/include/asm/delay.h
new file mode 100644
index 0000000..d2598e3
--- /dev/null
+++ b/arch/m68k/include/asm/delay.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "delay_no.h"
+#else
+#include "delay_mm.h"
+#endif
diff --git a/include/asm-m68k/delay.h b/arch/m68k/include/asm/delay_mm.h
similarity index 100%
rename from include/asm-m68k/delay.h
rename to arch/m68k/include/asm/delay_mm.h
diff --git a/arch/m68knommu/include/asm/delay.h b/arch/m68k/include/asm/delay_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/delay.h
rename to arch/m68k/include/asm/delay_no.h
diff --git a/arch/m68knommu/include/asm/device.h b/arch/m68k/include/asm/device.h
similarity index 100%
rename from arch/m68knommu/include/asm/device.h
rename to arch/m68k/include/asm/device.h
diff --git a/arch/m68k/include/asm/div64.h b/arch/m68k/include/asm/div64.h
new file mode 100644
index 0000000..d211d9f5
--- /dev/null
+++ b/arch/m68k/include/asm/div64.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "div64_no.h"
+#else
+#include "div64_mm.h"
+#endif
diff --git a/include/asm-m68k/div64.h b/arch/m68k/include/asm/div64_mm.h
similarity index 100%
rename from include/asm-m68k/div64.h
rename to arch/m68k/include/asm/div64_mm.h
diff --git a/arch/m68knommu/include/asm/div64.h b/arch/m68k/include/asm/div64_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/div64.h
rename to arch/m68k/include/asm/div64_no.h
diff --git a/arch/m68k/include/asm/dma-mapping.h b/arch/m68k/include/asm/dma-mapping.h
new file mode 100644
index 0000000..f4a4c76
--- /dev/null
+++ b/arch/m68k/include/asm/dma-mapping.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "dma-mapping_no.h"
+#else
+#include "dma-mapping_mm.h"
+#endif
diff --git a/include/asm-m68k/dma-mapping.h b/arch/m68k/include/asm/dma-mapping_mm.h
similarity index 100%
rename from include/asm-m68k/dma-mapping.h
rename to arch/m68k/include/asm/dma-mapping_mm.h
diff --git a/arch/m68knommu/include/asm/dma-mapping.h b/arch/m68k/include/asm/dma-mapping_no.h
similarity index 68%
rename from arch/m68knommu/include/asm/dma-mapping.h
rename to arch/m68k/include/asm/dma-mapping_no.h
index 6aeab18..1748f2b 100644
--- a/arch/m68knommu/include/asm/dma-mapping.h
+++ b/arch/m68k/include/asm/dma-mapping_no.h
@@ -1,10 +1,6 @@
 #ifndef _M68KNOMMU_DMA_MAPPING_H
 #define _M68KNOMMU_DMA_MAPPING_H
 
-#ifdef CONFIG_PCI
-#include <asm-generic/dma-mapping.h>
-#else
 #include <asm-generic/dma-mapping-broken.h>
-#endif
 
 #endif  /* _M68KNOMMU_DMA_MAPPING_H */
diff --git a/arch/m68k/include/asm/dma.h b/arch/m68k/include/asm/dma.h
new file mode 100644
index 0000000..b82e660
--- /dev/null
+++ b/arch/m68k/include/asm/dma.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "dma_no.h"
+#else
+#include "dma_mm.h"
+#endif
diff --git a/include/asm-m68k/dma.h b/arch/m68k/include/asm/dma_mm.h
similarity index 100%
rename from include/asm-m68k/dma.h
rename to arch/m68k/include/asm/dma_mm.h
diff --git a/arch/m68knommu/include/asm/dma.h b/arch/m68k/include/asm/dma_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/dma.h
rename to arch/m68k/include/asm/dma_no.h
diff --git a/include/asm-m68k/dsp56k.h b/arch/m68k/include/asm/dsp56k.h
similarity index 100%
rename from include/asm-m68k/dsp56k.h
rename to arch/m68k/include/asm/dsp56k.h
diff --git a/include/asm-m68k/dvma.h b/arch/m68k/include/asm/dvma.h
similarity index 100%
rename from include/asm-m68k/dvma.h
rename to arch/m68k/include/asm/dvma.h
diff --git a/arch/m68k/include/asm/elf.h b/arch/m68k/include/asm/elf.h
new file mode 100644
index 0000000..04ce488
--- /dev/null
+++ b/arch/m68k/include/asm/elf.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "elf_no.h"
+#else
+#include "elf_mm.h"
+#endif
diff --git a/include/asm-m68k/elf.h b/arch/m68k/include/asm/elf_mm.h
similarity index 100%
rename from include/asm-m68k/elf.h
rename to arch/m68k/include/asm/elf_mm.h
diff --git a/arch/m68knommu/include/asm/elf.h b/arch/m68k/include/asm/elf_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/elf.h
rename to arch/m68k/include/asm/elf_no.h
diff --git a/arch/m68knommu/include/asm/elia.h b/arch/m68k/include/asm/elia.h
similarity index 100%
rename from arch/m68knommu/include/asm/elia.h
rename to arch/m68k/include/asm/elia.h
diff --git a/arch/m68knommu/include/asm/emergency-restart.h b/arch/m68k/include/asm/emergency-restart.h
similarity index 100%
rename from arch/m68knommu/include/asm/emergency-restart.h
rename to arch/m68k/include/asm/emergency-restart.h
diff --git a/arch/m68k/include/asm/entry.h b/arch/m68k/include/asm/entry.h
new file mode 100644
index 0000000..876eec6
--- /dev/null
+++ b/arch/m68k/include/asm/entry.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "entry_no.h"
+#else
+#include "entry_mm.h"
+#endif
diff --git a/include/asm-m68k/entry.h b/arch/m68k/include/asm/entry_mm.h
similarity index 100%
rename from include/asm-m68k/entry.h
rename to arch/m68k/include/asm/entry_mm.h
diff --git a/arch/m68knommu/include/asm/entry.h b/arch/m68k/include/asm/entry_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/entry.h
rename to arch/m68k/include/asm/entry_no.h
diff --git a/include/asm-m68k/errno.h b/arch/m68k/include/asm/errno.h
similarity index 100%
rename from include/asm-m68k/errno.h
rename to arch/m68k/include/asm/errno.h
diff --git a/arch/m68k/include/asm/fb.h b/arch/m68k/include/asm/fb.h
new file mode 100644
index 0000000..97bcaef
--- /dev/null
+++ b/arch/m68k/include/asm/fb.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "fb_no.h"
+#else
+#include "fb_mm.h"
+#endif
diff --git a/include/asm-m68k/fb.h b/arch/m68k/include/asm/fb_mm.h
similarity index 100%
rename from include/asm-m68k/fb.h
rename to arch/m68k/include/asm/fb_mm.h
diff --git a/arch/m68knommu/include/asm/fb.h b/arch/m68k/include/asm/fb_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/fb.h
rename to arch/m68k/include/asm/fb_no.h
diff --git a/include/asm-m68k/fbio.h b/arch/m68k/include/asm/fbio.h
similarity index 100%
rename from include/asm-m68k/fbio.h
rename to arch/m68k/include/asm/fbio.h
diff --git a/include/asm-m68k/fcntl.h b/arch/m68k/include/asm/fcntl.h
similarity index 100%
rename from include/asm-m68k/fcntl.h
rename to arch/m68k/include/asm/fcntl.h
diff --git a/arch/m68knommu/include/asm/flat.h b/arch/m68k/include/asm/flat.h
similarity index 100%
rename from arch/m68knommu/include/asm/flat.h
rename to arch/m68k/include/asm/flat.h
diff --git a/include/asm-m68k/floppy.h b/arch/m68k/include/asm/floppy.h
similarity index 100%
rename from include/asm-m68k/floppy.h
rename to arch/m68k/include/asm/floppy.h
diff --git a/arch/m68k/include/asm/fpu.h b/arch/m68k/include/asm/fpu.h
new file mode 100644
index 0000000..e19bc5e
--- /dev/null
+++ b/arch/m68k/include/asm/fpu.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "fpu_no.h"
+#else
+#include "fpu_mm.h"
+#endif
diff --git a/include/asm-m68k/fpu.h b/arch/m68k/include/asm/fpu_mm.h
similarity index 100%
rename from include/asm-m68k/fpu.h
rename to arch/m68k/include/asm/fpu_mm.h
diff --git a/arch/m68knommu/include/asm/fpu.h b/arch/m68k/include/asm/fpu_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/fpu.h
rename to arch/m68k/include/asm/fpu_no.h
diff --git a/arch/m68knommu/include/asm/futex.h b/arch/m68k/include/asm/futex.h
similarity index 100%
rename from arch/m68knommu/include/asm/futex.h
rename to arch/m68k/include/asm/futex.h
diff --git a/arch/m68k/include/asm/hardirq.h b/arch/m68k/include/asm/hardirq.h
new file mode 100644
index 0000000..56d0d5d
--- /dev/null
+++ b/arch/m68k/include/asm/hardirq.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "hardirq_no.h"
+#else
+#include "hardirq_mm.h"
+#endif
diff --git a/include/asm-m68k/hardirq.h b/arch/m68k/include/asm/hardirq_mm.h
similarity index 100%
rename from include/asm-m68k/hardirq.h
rename to arch/m68k/include/asm/hardirq_mm.h
diff --git a/arch/m68knommu/include/asm/hardirq.h b/arch/m68k/include/asm/hardirq_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/hardirq.h
rename to arch/m68k/include/asm/hardirq_no.h
diff --git a/include/asm-m68k/hp300hw.h b/arch/m68k/include/asm/hp300hw.h
similarity index 100%
rename from include/asm-m68k/hp300hw.h
rename to arch/m68k/include/asm/hp300hw.h
diff --git a/arch/m68k/include/asm/hw_irq.h b/arch/m68k/include/asm/hw_irq.h
new file mode 100644
index 0000000..e195260
--- /dev/null
+++ b/arch/m68k/include/asm/hw_irq.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "hw_irq_no.h"
+#else
+#include "hw_irq_mm.h"
+#endif
diff --git a/include/asm-m68k/hw_irq.h b/arch/m68k/include/asm/hw_irq_mm.h
similarity index 100%
rename from include/asm-m68k/hw_irq.h
rename to arch/m68k/include/asm/hw_irq_mm.h
diff --git a/arch/m68knommu/include/asm/hw_irq.h b/arch/m68k/include/asm/hw_irq_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/hw_irq.h
rename to arch/m68k/include/asm/hw_irq_no.h
diff --git a/include/asm-m68k/hwtest.h b/arch/m68k/include/asm/hwtest.h
similarity index 100%
rename from include/asm-m68k/hwtest.h
rename to arch/m68k/include/asm/hwtest.h
diff --git a/include/asm-m68k/ide.h b/arch/m68k/include/asm/ide.h
similarity index 100%
rename from include/asm-m68k/ide.h
rename to arch/m68k/include/asm/ide.h
diff --git a/include/asm-m68k/idprom.h b/arch/m68k/include/asm/idprom.h
similarity index 100%
rename from include/asm-m68k/idprom.h
rename to arch/m68k/include/asm/idprom.h
diff --git a/include/asm-m68k/intersil.h b/arch/m68k/include/asm/intersil.h
similarity index 100%
rename from include/asm-m68k/intersil.h
rename to arch/m68k/include/asm/intersil.h
diff --git a/arch/m68k/include/asm/io.h b/arch/m68k/include/asm/io.h
new file mode 100644
index 0000000..c7210ba
--- /dev/null
+++ b/arch/m68k/include/asm/io.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "io_no.h"
+#else
+#include "io_mm.h"
+#endif
diff --git a/include/asm-m68k/io.h b/arch/m68k/include/asm/io_mm.h
similarity index 100%
rename from include/asm-m68k/io.h
rename to arch/m68k/include/asm/io_mm.h
diff --git a/arch/m68knommu/include/asm/io.h b/arch/m68k/include/asm/io_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/io.h
rename to arch/m68k/include/asm/io_no.h
diff --git a/arch/m68knommu/include/asm/ioctl.h b/arch/m68k/include/asm/ioctl.h
similarity index 100%
rename from arch/m68knommu/include/asm/ioctl.h
rename to arch/m68k/include/asm/ioctl.h
diff --git a/include/asm-m68k/ioctls.h b/arch/m68k/include/asm/ioctls.h
similarity index 100%
rename from include/asm-m68k/ioctls.h
rename to arch/m68k/include/asm/ioctls.h
diff --git a/include/asm-m68k/ipcbuf.h b/arch/m68k/include/asm/ipcbuf.h
similarity index 100%
rename from include/asm-m68k/ipcbuf.h
rename to arch/m68k/include/asm/ipcbuf.h
diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h
new file mode 100644
index 0000000..d031416
--- /dev/null
+++ b/arch/m68k/include/asm/irq.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "irq_no.h"
+#else
+#include "irq_mm.h"
+#endif
diff --git a/include/asm-m68k/irq.h b/arch/m68k/include/asm/irq_mm.h
similarity index 100%
rename from include/asm-m68k/irq.h
rename to arch/m68k/include/asm/irq_mm.h
diff --git a/arch/m68knommu/include/asm/irq.h b/arch/m68k/include/asm/irq_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/irq.h
rename to arch/m68k/include/asm/irq_no.h
diff --git a/arch/m68knommu/include/asm/irq_regs.h b/arch/m68k/include/asm/irq_regs.h
similarity index 100%
rename from arch/m68knommu/include/asm/irq_regs.h
rename to arch/m68k/include/asm/irq_regs.h
diff --git a/arch/m68knommu/include/asm/kdebug.h b/arch/m68k/include/asm/kdebug.h
similarity index 100%
rename from arch/m68knommu/include/asm/kdebug.h
rename to arch/m68k/include/asm/kdebug.h
diff --git a/arch/m68k/include/asm/kmap_types.h b/arch/m68k/include/asm/kmap_types.h
new file mode 100644
index 0000000..045d9fd
--- /dev/null
+++ b/arch/m68k/include/asm/kmap_types.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "kmap_types_no.h"
+#else
+#include "kmap_types_mm.h"
+#endif
diff --git a/include/asm-m68k/kmap_types.h b/arch/m68k/include/asm/kmap_types_mm.h
similarity index 100%
rename from include/asm-m68k/kmap_types.h
rename to arch/m68k/include/asm/kmap_types_mm.h
diff --git a/arch/m68knommu/include/asm/kmap_types.h b/arch/m68k/include/asm/kmap_types_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/kmap_types.h
rename to arch/m68k/include/asm/kmap_types_no.h
diff --git a/include/asm-m68k/linkage.h b/arch/m68k/include/asm/linkage.h
similarity index 100%
rename from include/asm-m68k/linkage.h
rename to arch/m68k/include/asm/linkage.h
diff --git a/include/asm-m68k/local.h b/arch/m68k/include/asm/local.h
similarity index 100%
rename from include/asm-m68k/local.h
rename to arch/m68k/include/asm/local.h
diff --git a/arch/m68knommu/include/asm/m5206sim.h b/arch/m68k/include/asm/m5206sim.h
similarity index 100%
rename from arch/m68knommu/include/asm/m5206sim.h
rename to arch/m68k/include/asm/m5206sim.h
diff --git a/arch/m68knommu/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h
similarity index 100%
rename from arch/m68knommu/include/asm/m520xsim.h
rename to arch/m68k/include/asm/m520xsim.h
diff --git a/arch/m68knommu/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h
similarity index 100%
rename from arch/m68knommu/include/asm/m523xsim.h
rename to arch/m68k/include/asm/m523xsim.h
diff --git a/arch/m68knommu/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h
similarity index 100%
rename from arch/m68knommu/include/asm/m5249sim.h
rename to arch/m68k/include/asm/m5249sim.h
diff --git a/arch/m68knommu/include/asm/m5272sim.h b/arch/m68k/include/asm/m5272sim.h
similarity index 100%
rename from arch/m68knommu/include/asm/m5272sim.h
rename to arch/m68k/include/asm/m5272sim.h
diff --git a/arch/m68knommu/include/asm/m527xsim.h b/arch/m68k/include/asm/m527xsim.h
similarity index 100%
rename from arch/m68knommu/include/asm/m527xsim.h
rename to arch/m68k/include/asm/m527xsim.h
diff --git a/arch/m68knommu/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h
similarity index 100%
rename from arch/m68knommu/include/asm/m528xsim.h
rename to arch/m68k/include/asm/m528xsim.h
diff --git a/arch/m68knommu/include/asm/m5307sim.h b/arch/m68k/include/asm/m5307sim.h
similarity index 100%
rename from arch/m68knommu/include/asm/m5307sim.h
rename to arch/m68k/include/asm/m5307sim.h
diff --git a/arch/m68knommu/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h
similarity index 100%
rename from arch/m68knommu/include/asm/m532xsim.h
rename to arch/m68k/include/asm/m532xsim.h
diff --git a/arch/m68knommu/include/asm/m5407sim.h b/arch/m68k/include/asm/m5407sim.h
similarity index 100%
rename from arch/m68knommu/include/asm/m5407sim.h
rename to arch/m68k/include/asm/m5407sim.h
diff --git a/arch/m68knommu/include/asm/m68360.h b/arch/m68k/include/asm/m68360.h
similarity index 100%
rename from arch/m68knommu/include/asm/m68360.h
rename to arch/m68k/include/asm/m68360.h
diff --git a/arch/m68knommu/include/asm/m68360_enet.h b/arch/m68k/include/asm/m68360_enet.h
similarity index 100%
rename from arch/m68knommu/include/asm/m68360_enet.h
rename to arch/m68k/include/asm/m68360_enet.h
diff --git a/arch/m68knommu/include/asm/m68360_pram.h b/arch/m68k/include/asm/m68360_pram.h
similarity index 100%
rename from arch/m68knommu/include/asm/m68360_pram.h
rename to arch/m68k/include/asm/m68360_pram.h
diff --git a/arch/m68knommu/include/asm/m68360_quicc.h b/arch/m68k/include/asm/m68360_quicc.h
similarity index 100%
rename from arch/m68knommu/include/asm/m68360_quicc.h
rename to arch/m68k/include/asm/m68360_quicc.h
diff --git a/arch/m68knommu/include/asm/m68360_regs.h b/arch/m68k/include/asm/m68360_regs.h
similarity index 100%
rename from arch/m68knommu/include/asm/m68360_regs.h
rename to arch/m68k/include/asm/m68360_regs.h
diff --git a/include/asm-m68k/mac_asc.h b/arch/m68k/include/asm/mac_asc.h
similarity index 100%
rename from include/asm-m68k/mac_asc.h
rename to arch/m68k/include/asm/mac_asc.h
diff --git a/include/asm-m68k/mac_baboon.h b/arch/m68k/include/asm/mac_baboon.h
similarity index 100%
rename from include/asm-m68k/mac_baboon.h
rename to arch/m68k/include/asm/mac_baboon.h
diff --git a/include/asm-m68k/mac_iop.h b/arch/m68k/include/asm/mac_iop.h
similarity index 100%
rename from include/asm-m68k/mac_iop.h
rename to arch/m68k/include/asm/mac_iop.h
diff --git a/include/asm-m68k/mac_mouse.h b/arch/m68k/include/asm/mac_mouse.h
similarity index 100%
rename from include/asm-m68k/mac_mouse.h
rename to arch/m68k/include/asm/mac_mouse.h
diff --git a/include/asm-m68k/mac_oss.h b/arch/m68k/include/asm/mac_oss.h
similarity index 100%
rename from include/asm-m68k/mac_oss.h
rename to arch/m68k/include/asm/mac_oss.h
diff --git a/include/asm-m68k/mac_psc.h b/arch/m68k/include/asm/mac_psc.h
similarity index 100%
rename from include/asm-m68k/mac_psc.h
rename to arch/m68k/include/asm/mac_psc.h
diff --git a/include/asm-m68k/mac_via.h b/arch/m68k/include/asm/mac_via.h
similarity index 100%
rename from include/asm-m68k/mac_via.h
rename to arch/m68k/include/asm/mac_via.h
diff --git a/arch/m68k/include/asm/machdep.h b/arch/m68k/include/asm/machdep.h
new file mode 100644
index 0000000..fc24b6f
--- /dev/null
+++ b/arch/m68k/include/asm/machdep.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "machdep_no.h"
+#else
+#include "machdep_mm.h"
+#endif
diff --git a/include/asm-m68k/machdep.h b/arch/m68k/include/asm/machdep_mm.h
similarity index 100%
rename from include/asm-m68k/machdep.h
rename to arch/m68k/include/asm/machdep_mm.h
diff --git a/arch/m68knommu/include/asm/machdep.h b/arch/m68k/include/asm/machdep_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/machdep.h
rename to arch/m68k/include/asm/machdep_no.h
diff --git a/include/asm-m68k/machines.h b/arch/m68k/include/asm/machines.h
similarity index 100%
rename from include/asm-m68k/machines.h
rename to arch/m68k/include/asm/machines.h
diff --git a/include/asm-m68k/machw.h b/arch/m68k/include/asm/machw.h
similarity index 100%
rename from include/asm-m68k/machw.h
rename to arch/m68k/include/asm/machw.h
diff --git a/include/asm-m68k/macintosh.h b/arch/m68k/include/asm/macintosh.h
similarity index 100%
rename from include/asm-m68k/macintosh.h
rename to arch/m68k/include/asm/macintosh.h
diff --git a/include/asm-m68k/macints.h b/arch/m68k/include/asm/macints.h
similarity index 100%
rename from include/asm-m68k/macints.h
rename to arch/m68k/include/asm/macints.h
diff --git a/include/asm-m68k/math-emu.h b/arch/m68k/include/asm/math-emu.h
similarity index 100%
rename from include/asm-m68k/math-emu.h
rename to arch/m68k/include/asm/math-emu.h
diff --git a/arch/m68k/include/asm/mc146818rtc.h b/arch/m68k/include/asm/mc146818rtc.h
new file mode 100644
index 0000000..fb90dcf
--- /dev/null
+++ b/arch/m68k/include/asm/mc146818rtc.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "mc146818rtc_no.h"
+#else
+#include "mc146818rtc_mm.h"
+#endif
diff --git a/include/asm-m68k/mc146818rtc.h b/arch/m68k/include/asm/mc146818rtc_mm.h
similarity index 100%
rename from include/asm-m68k/mc146818rtc.h
rename to arch/m68k/include/asm/mc146818rtc_mm.h
diff --git a/arch/m68knommu/include/asm/mc146818rtc.h b/arch/m68k/include/asm/mc146818rtc_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/mc146818rtc.h
rename to arch/m68k/include/asm/mc146818rtc_no.h
diff --git a/arch/m68knommu/include/asm/mcfcache.h b/arch/m68k/include/asm/mcfcache.h
similarity index 100%
rename from arch/m68knommu/include/asm/mcfcache.h
rename to arch/m68k/include/asm/mcfcache.h
diff --git a/arch/m68knommu/include/asm/mcfdma.h b/arch/m68k/include/asm/mcfdma.h
similarity index 100%
rename from arch/m68knommu/include/asm/mcfdma.h
rename to arch/m68k/include/asm/mcfdma.h
diff --git a/arch/m68knommu/include/asm/mcfmbus.h b/arch/m68k/include/asm/mcfmbus.h
similarity index 100%
rename from arch/m68knommu/include/asm/mcfmbus.h
rename to arch/m68k/include/asm/mcfmbus.h
diff --git a/arch/m68knommu/include/asm/mcfne.h b/arch/m68k/include/asm/mcfne.h
similarity index 100%
rename from arch/m68knommu/include/asm/mcfne.h
rename to arch/m68k/include/asm/mcfne.h
diff --git a/arch/m68knommu/include/asm/mcfpci.h b/arch/m68k/include/asm/mcfpci.h
similarity index 100%
rename from arch/m68knommu/include/asm/mcfpci.h
rename to arch/m68k/include/asm/mcfpci.h
diff --git a/arch/m68knommu/include/asm/mcfpit.h b/arch/m68k/include/asm/mcfpit.h
similarity index 100%
rename from arch/m68knommu/include/asm/mcfpit.h
rename to arch/m68k/include/asm/mcfpit.h
diff --git a/arch/m68knommu/include/asm/mcfsim.h b/arch/m68k/include/asm/mcfsim.h
similarity index 100%
rename from arch/m68knommu/include/asm/mcfsim.h
rename to arch/m68k/include/asm/mcfsim.h
diff --git a/arch/m68knommu/include/asm/mcfsmc.h b/arch/m68k/include/asm/mcfsmc.h
similarity index 100%
rename from arch/m68knommu/include/asm/mcfsmc.h
rename to arch/m68k/include/asm/mcfsmc.h
diff --git a/arch/m68knommu/include/asm/mcftimer.h b/arch/m68k/include/asm/mcftimer.h
similarity index 100%
rename from arch/m68knommu/include/asm/mcftimer.h
rename to arch/m68k/include/asm/mcftimer.h
diff --git a/arch/m68knommu/include/asm/mcfuart.h b/arch/m68k/include/asm/mcfuart.h
similarity index 100%
rename from arch/m68knommu/include/asm/mcfuart.h
rename to arch/m68k/include/asm/mcfuart.h
diff --git a/arch/m68knommu/include/asm/mcfwdebug.h b/arch/m68k/include/asm/mcfwdebug.h
similarity index 100%
rename from arch/m68knommu/include/asm/mcfwdebug.h
rename to arch/m68k/include/asm/mcfwdebug.h
diff --git a/include/asm-m68k/md.h b/arch/m68k/include/asm/md.h
similarity index 100%
rename from include/asm-m68k/md.h
rename to arch/m68k/include/asm/md.h
diff --git a/include/asm-m68k/mman.h b/arch/m68k/include/asm/mman.h
similarity index 100%
rename from include/asm-m68k/mman.h
rename to arch/m68k/include/asm/mman.h
diff --git a/arch/m68k/include/asm/mmu.h b/arch/m68k/include/asm/mmu.h
new file mode 100644
index 0000000..a81d394
--- /dev/null
+++ b/arch/m68k/include/asm/mmu.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "mmu_no.h"
+#else
+#include "mmu_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/mmu_context.h b/arch/m68k/include/asm/mmu_context.h
new file mode 100644
index 0000000..b440928
--- /dev/null
+++ b/arch/m68k/include/asm/mmu_context.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "mmu_context_no.h"
+#else
+#include "mmu_context_mm.h"
+#endif
diff --git a/include/asm-m68k/mmu_context.h b/arch/m68k/include/asm/mmu_context_mm.h
similarity index 100%
rename from include/asm-m68k/mmu_context.h
rename to arch/m68k/include/asm/mmu_context_mm.h
diff --git a/arch/m68knommu/include/asm/mmu_context.h b/arch/m68k/include/asm/mmu_context_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/mmu_context.h
rename to arch/m68k/include/asm/mmu_context_no.h
diff --git a/include/asm-m68k/mmu.h b/arch/m68k/include/asm/mmu_mm.h
similarity index 100%
rename from include/asm-m68k/mmu.h
rename to arch/m68k/include/asm/mmu_mm.h
diff --git a/arch/m68knommu/include/asm/mmu.h b/arch/m68k/include/asm/mmu_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/mmu.h
rename to arch/m68k/include/asm/mmu_no.h
diff --git a/include/asm-m68k/mmzone.h b/arch/m68k/include/asm/mmzone.h
similarity index 100%
rename from include/asm-m68k/mmzone.h
rename to arch/m68k/include/asm/mmzone.h
diff --git a/arch/m68k/include/asm/module.h b/arch/m68k/include/asm/module.h
new file mode 100644
index 0000000..79b59d1
--- /dev/null
+++ b/arch/m68k/include/asm/module.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "module_no.h"
+#else
+#include "module_mm.h"
+#endif
diff --git a/include/asm-m68k/module.h b/arch/m68k/include/asm/module_mm.h
similarity index 100%
rename from include/asm-m68k/module.h
rename to arch/m68k/include/asm/module_mm.h
diff --git a/arch/m68knommu/include/asm/module.h b/arch/m68k/include/asm/module_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/module.h
rename to arch/m68k/include/asm/module_no.h
diff --git a/include/asm-m68k/motorola_pgalloc.h b/arch/m68k/include/asm/motorola_pgalloc.h
similarity index 100%
rename from include/asm-m68k/motorola_pgalloc.h
rename to arch/m68k/include/asm/motorola_pgalloc.h
diff --git a/include/asm-m68k/motorola_pgtable.h b/arch/m68k/include/asm/motorola_pgtable.h
similarity index 100%
rename from include/asm-m68k/motorola_pgtable.h
rename to arch/m68k/include/asm/motorola_pgtable.h
diff --git a/include/asm-m68k/movs.h b/arch/m68k/include/asm/movs.h
similarity index 100%
rename from include/asm-m68k/movs.h
rename to arch/m68k/include/asm/movs.h
diff --git a/include/asm-m68k/msgbuf.h b/arch/m68k/include/asm/msgbuf.h
similarity index 100%
rename from include/asm-m68k/msgbuf.h
rename to arch/m68k/include/asm/msgbuf.h
diff --git a/arch/m68knommu/include/asm/mutex.h b/arch/m68k/include/asm/mutex.h
similarity index 100%
rename from arch/m68knommu/include/asm/mutex.h
rename to arch/m68k/include/asm/mutex.h
diff --git a/include/asm-m68k/mvme147hw.h b/arch/m68k/include/asm/mvme147hw.h
similarity index 100%
rename from include/asm-m68k/mvme147hw.h
rename to arch/m68k/include/asm/mvme147hw.h
diff --git a/include/asm-m68k/mvme16xhw.h b/arch/m68k/include/asm/mvme16xhw.h
similarity index 100%
rename from include/asm-m68k/mvme16xhw.h
rename to arch/m68k/include/asm/mvme16xhw.h
diff --git a/arch/m68knommu/include/asm/nettel.h b/arch/m68k/include/asm/nettel.h
similarity index 100%
rename from arch/m68knommu/include/asm/nettel.h
rename to arch/m68k/include/asm/nettel.h
diff --git a/include/asm-m68k/nubus.h b/arch/m68k/include/asm/nubus.h
similarity index 100%
rename from include/asm-m68k/nubus.h
rename to arch/m68k/include/asm/nubus.h
diff --git a/include/asm-m68k/openprom.h b/arch/m68k/include/asm/openprom.h
similarity index 100%
rename from include/asm-m68k/openprom.h
rename to arch/m68k/include/asm/openprom.h
diff --git a/include/asm-m68k/oplib.h b/arch/m68k/include/asm/oplib.h
similarity index 100%
rename from include/asm-m68k/oplib.h
rename to arch/m68k/include/asm/oplib.h
diff --git a/arch/m68k/include/asm/page.h b/arch/m68k/include/asm/page.h
new file mode 100644
index 0000000..f2b4480
--- /dev/null
+++ b/arch/m68k/include/asm/page.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "page_no.h"
+#else
+#include "page_mm.h"
+#endif
diff --git a/include/asm-m68k/page.h b/arch/m68k/include/asm/page_mm.h
similarity index 100%
rename from include/asm-m68k/page.h
rename to arch/m68k/include/asm/page_mm.h
diff --git a/arch/m68knommu/include/asm/page.h b/arch/m68k/include/asm/page_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/page.h
rename to arch/m68k/include/asm/page_no.h
diff --git a/arch/m68k/include/asm/page_offset.h b/arch/m68k/include/asm/page_offset.h
new file mode 100644
index 0000000..66455c8
--- /dev/null
+++ b/arch/m68k/include/asm/page_offset.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "page_offset_no.h"
+#else
+#include "page_offset_mm.h"
+#endif
diff --git a/include/asm-m68k/page_offset.h b/arch/m68k/include/asm/page_offset_mm.h
similarity index 100%
rename from include/asm-m68k/page_offset.h
rename to arch/m68k/include/asm/page_offset_mm.h
diff --git a/arch/m68knommu/include/asm/page_offset.h b/arch/m68k/include/asm/page_offset_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/page_offset.h
rename to arch/m68k/include/asm/page_offset_no.h
diff --git a/arch/m68k/include/asm/param.h b/arch/m68k/include/asm/param.h
new file mode 100644
index 0000000..40d1112
--- /dev/null
+++ b/arch/m68k/include/asm/param.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "param_no.h"
+#else
+#include "param_mm.h"
+#endif
diff --git a/include/asm-m68k/param.h b/arch/m68k/include/asm/param_mm.h
similarity index 100%
rename from include/asm-m68k/param.h
rename to arch/m68k/include/asm/param_mm.h
diff --git a/arch/m68knommu/include/asm/param.h b/arch/m68k/include/asm/param_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/param.h
rename to arch/m68k/include/asm/param_no.h
diff --git a/include/asm-m68k/parport.h b/arch/m68k/include/asm/parport.h
similarity index 100%
rename from include/asm-m68k/parport.h
rename to arch/m68k/include/asm/parport.h
diff --git a/arch/m68k/include/asm/pci.h b/arch/m68k/include/asm/pci.h
new file mode 100644
index 0000000..dbea953
--- /dev/null
+++ b/arch/m68k/include/asm/pci.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "pci_no.h"
+#else
+#include "pci_mm.h"
+#endif
diff --git a/include/asm-m68k/pci.h b/arch/m68k/include/asm/pci_mm.h
similarity index 100%
rename from include/asm-m68k/pci.h
rename to arch/m68k/include/asm/pci_mm.h
diff --git a/arch/m68knommu/include/asm/pci.h b/arch/m68k/include/asm/pci_no.h
similarity index 95%
rename from arch/m68knommu/include/asm/pci.h
rename to arch/m68k/include/asm/pci_no.h
index a13f3cc..9abbc03 100644
--- a/arch/m68knommu/include/asm/pci.h
+++ b/arch/m68k/include/asm/pci_no.h
@@ -1,7 +1,7 @@
 #ifndef M68KNOMMU_PCI_H
 #define	M68KNOMMU_PCI_H
 
-#include <asm-m68k/pci.h>
+#include <asm/pci_mm.h>
 
 #ifdef CONFIG_COMEMPCI
 /*
diff --git a/include/asm-m68k/percpu.h b/arch/m68k/include/asm/percpu.h
similarity index 100%
rename from include/asm-m68k/percpu.h
rename to arch/m68k/include/asm/percpu.h
diff --git a/arch/m68k/include/asm/pgalloc.h b/arch/m68k/include/asm/pgalloc.h
new file mode 100644
index 0000000..059cb73
--- /dev/null
+++ b/arch/m68k/include/asm/pgalloc.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "pgalloc_no.h"
+#else
+#include "pgalloc_mm.h"
+#endif
diff --git a/include/asm-m68k/pgalloc.h b/arch/m68k/include/asm/pgalloc_mm.h
similarity index 100%
rename from include/asm-m68k/pgalloc.h
rename to arch/m68k/include/asm/pgalloc_mm.h
diff --git a/arch/m68knommu/include/asm/pgalloc.h b/arch/m68k/include/asm/pgalloc_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/pgalloc.h
rename to arch/m68k/include/asm/pgalloc_no.h
diff --git a/arch/m68k/include/asm/pgtable.h b/arch/m68k/include/asm/pgtable.h
new file mode 100644
index 0000000..ee6759e
--- /dev/null
+++ b/arch/m68k/include/asm/pgtable.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "pgtable_no.h"
+#else
+#include "pgtable_mm.h"
+#endif
diff --git a/include/asm-m68k/pgtable.h b/arch/m68k/include/asm/pgtable_mm.h
similarity index 100%
rename from include/asm-m68k/pgtable.h
rename to arch/m68k/include/asm/pgtable_mm.h
diff --git a/arch/m68knommu/include/asm/pgtable.h b/arch/m68k/include/asm/pgtable_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/pgtable.h
rename to arch/m68k/include/asm/pgtable_no.h
diff --git a/include/asm-m68k/poll.h b/arch/m68k/include/asm/poll.h
similarity index 100%
rename from include/asm-m68k/poll.h
rename to arch/m68k/include/asm/poll.h
diff --git a/include/asm-m68k/posix_types.h b/arch/m68k/include/asm/posix_types.h
similarity index 100%
rename from include/asm-m68k/posix_types.h
rename to arch/m68k/include/asm/posix_types.h
diff --git a/arch/m68k/include/asm/processor.h b/arch/m68k/include/asm/processor.h
new file mode 100644
index 0000000..fc3f2c2
--- /dev/null
+++ b/arch/m68k/include/asm/processor.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "processor_no.h"
+#else
+#include "processor_mm.h"
+#endif
diff --git a/include/asm-m68k/processor.h b/arch/m68k/include/asm/processor_mm.h
similarity index 100%
rename from include/asm-m68k/processor.h
rename to arch/m68k/include/asm/processor_mm.h
diff --git a/arch/m68knommu/include/asm/processor.h b/arch/m68k/include/asm/processor_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/processor.h
rename to arch/m68k/include/asm/processor_no.h
diff --git a/arch/m68k/include/asm/ptrace.h b/arch/m68k/include/asm/ptrace.h
new file mode 100644
index 0000000..e83cd2f6
--- /dev/null
+++ b/arch/m68k/include/asm/ptrace.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "ptrace_no.h"
+#else
+#include "ptrace_mm.h"
+#endif
diff --git a/include/asm-m68k/ptrace.h b/arch/m68k/include/asm/ptrace_mm.h
similarity index 100%
rename from include/asm-m68k/ptrace.h
rename to arch/m68k/include/asm/ptrace_mm.h
diff --git a/arch/m68knommu/include/asm/ptrace.h b/arch/m68k/include/asm/ptrace_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/ptrace.h
rename to arch/m68k/include/asm/ptrace_no.h
diff --git a/include/asm-m68k/q40_master.h b/arch/m68k/include/asm/q40_master.h
similarity index 100%
rename from include/asm-m68k/q40_master.h
rename to arch/m68k/include/asm/q40_master.h
diff --git a/include/asm-m68k/q40ints.h b/arch/m68k/include/asm/q40ints.h
similarity index 100%
rename from include/asm-m68k/q40ints.h
rename to arch/m68k/include/asm/q40ints.h
diff --git a/arch/m68knommu/include/asm/quicc_simple.h b/arch/m68k/include/asm/quicc_simple.h
similarity index 100%
rename from arch/m68knommu/include/asm/quicc_simple.h
rename to arch/m68k/include/asm/quicc_simple.h
diff --git a/include/asm-m68k/raw_io.h b/arch/m68k/include/asm/raw_io.h
similarity index 100%
rename from include/asm-m68k/raw_io.h
rename to arch/m68k/include/asm/raw_io.h
diff --git a/include/asm-m68k/resource.h b/arch/m68k/include/asm/resource.h
similarity index 100%
rename from include/asm-m68k/resource.h
rename to arch/m68k/include/asm/resource.h
diff --git a/include/asm-m68k/rtc.h b/arch/m68k/include/asm/rtc.h
similarity index 100%
rename from include/asm-m68k/rtc.h
rename to arch/m68k/include/asm/rtc.h
diff --git a/include/asm-m68k/sbus.h b/arch/m68k/include/asm/sbus.h
similarity index 100%
rename from include/asm-m68k/sbus.h
rename to arch/m68k/include/asm/sbus.h
diff --git a/arch/m68k/include/asm/scatterlist.h b/arch/m68k/include/asm/scatterlist.h
new file mode 100644
index 0000000..b7e5286
--- /dev/null
+++ b/arch/m68k/include/asm/scatterlist.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "scatterlist_no.h"
+#else
+#include "scatterlist_mm.h"
+#endif
diff --git a/include/asm-m68k/scatterlist.h b/arch/m68k/include/asm/scatterlist_mm.h
similarity index 100%
rename from include/asm-m68k/scatterlist.h
rename to arch/m68k/include/asm/scatterlist_mm.h
diff --git a/arch/m68knommu/include/asm/scatterlist.h b/arch/m68k/include/asm/scatterlist_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/scatterlist.h
rename to arch/m68k/include/asm/scatterlist_no.h
diff --git a/include/asm-m68k/sections.h b/arch/m68k/include/asm/sections.h
similarity index 100%
rename from include/asm-m68k/sections.h
rename to arch/m68k/include/asm/sections.h
diff --git a/arch/m68k/include/asm/segment.h b/arch/m68k/include/asm/segment.h
new file mode 100644
index 0000000..82583bc
--- /dev/null
+++ b/arch/m68k/include/asm/segment.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "segment_no.h"
+#else
+#include "segment_mm.h"
+#endif
diff --git a/include/asm-m68k/segment.h b/arch/m68k/include/asm/segment_mm.h
similarity index 100%
rename from include/asm-m68k/segment.h
rename to arch/m68k/include/asm/segment_mm.h
diff --git a/arch/m68knommu/include/asm/segment.h b/arch/m68k/include/asm/segment_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/segment.h
rename to arch/m68k/include/asm/segment_no.h
diff --git a/include/asm-m68k/sembuf.h b/arch/m68k/include/asm/sembuf.h
similarity index 100%
rename from include/asm-m68k/sembuf.h
rename to arch/m68k/include/asm/sembuf.h
diff --git a/include/asm-m68k/serial.h b/arch/m68k/include/asm/serial.h
similarity index 100%
rename from include/asm-m68k/serial.h
rename to arch/m68k/include/asm/serial.h
diff --git a/arch/m68k/include/asm/setup.h b/arch/m68k/include/asm/setup.h
new file mode 100644
index 0000000..842f86f
--- /dev/null
+++ b/arch/m68k/include/asm/setup.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "setup_no.h"
+#else
+#include "setup_mm.h"
+#endif
diff --git a/include/asm-m68k/setup.h b/arch/m68k/include/asm/setup_mm.h
similarity index 100%
rename from include/asm-m68k/setup.h
rename to arch/m68k/include/asm/setup_mm.h
diff --git a/arch/m68knommu/include/asm/setup.h b/arch/m68k/include/asm/setup_no.h
similarity index 83%
rename from arch/m68knommu/include/asm/setup.h
rename to arch/m68k/include/asm/setup_no.h
index fb86bb2..45d286c 100644
--- a/arch/m68knommu/include/asm/setup.h
+++ b/arch/m68k/include/asm/setup_no.h
@@ -1,6 +1,6 @@
 #ifdef __KERNEL__
 
-#include <asm-m68k/setup.h>
+#include <asm/setup_mm.h>
 
 /* We have a bigger command line buffer. */
 #undef COMMAND_LINE_SIZE
diff --git a/include/asm-m68k/shm.h b/arch/m68k/include/asm/shm.h
similarity index 100%
rename from include/asm-m68k/shm.h
rename to arch/m68k/include/asm/shm.h
diff --git a/include/asm-m68k/shmbuf.h b/arch/m68k/include/asm/shmbuf.h
similarity index 100%
rename from include/asm-m68k/shmbuf.h
rename to arch/m68k/include/asm/shmbuf.h
diff --git a/include/asm-m68k/shmparam.h b/arch/m68k/include/asm/shmparam.h
similarity index 100%
rename from include/asm-m68k/shmparam.h
rename to arch/m68k/include/asm/shmparam.h
diff --git a/arch/m68k/include/asm/sigcontext.h b/arch/m68k/include/asm/sigcontext.h
new file mode 100644
index 0000000..bff6d40
--- /dev/null
+++ b/arch/m68k/include/asm/sigcontext.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "sigcontext_no.h"
+#else
+#include "sigcontext_mm.h"
+#endif
diff --git a/include/asm-m68k/sigcontext.h b/arch/m68k/include/asm/sigcontext_mm.h
similarity index 100%
rename from include/asm-m68k/sigcontext.h
rename to arch/m68k/include/asm/sigcontext_mm.h
diff --git a/arch/m68knommu/include/asm/sigcontext.h b/arch/m68k/include/asm/sigcontext_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/sigcontext.h
rename to arch/m68k/include/asm/sigcontext_no.h
diff --git a/arch/m68k/include/asm/siginfo.h b/arch/m68k/include/asm/siginfo.h
new file mode 100644
index 0000000..61219d7
--- /dev/null
+++ b/arch/m68k/include/asm/siginfo.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "siginfo_no.h"
+#else
+#include "siginfo_mm.h"
+#endif
diff --git a/include/asm-m68k/siginfo.h b/arch/m68k/include/asm/siginfo_mm.h
similarity index 100%
rename from include/asm-m68k/siginfo.h
rename to arch/m68k/include/asm/siginfo_mm.h
diff --git a/arch/m68knommu/include/asm/siginfo.h b/arch/m68k/include/asm/siginfo_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/siginfo.h
rename to arch/m68k/include/asm/siginfo_no.h
diff --git a/arch/m68k/include/asm/signal.h b/arch/m68k/include/asm/signal.h
new file mode 100644
index 0000000..3c19988
--- /dev/null
+++ b/arch/m68k/include/asm/signal.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "signal_no.h"
+#else
+#include "signal_mm.h"
+#endif
diff --git a/include/asm-m68k/signal.h b/arch/m68k/include/asm/signal_mm.h
similarity index 100%
rename from include/asm-m68k/signal.h
rename to arch/m68k/include/asm/signal_mm.h
diff --git a/arch/m68knommu/include/asm/signal.h b/arch/m68k/include/asm/signal_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/signal.h
rename to arch/m68k/include/asm/signal_no.h
diff --git a/arch/m68knommu/include/asm/smp.h b/arch/m68k/include/asm/smp.h
similarity index 100%
rename from arch/m68knommu/include/asm/smp.h
rename to arch/m68k/include/asm/smp.h
diff --git a/include/asm-m68k/socket.h b/arch/m68k/include/asm/socket.h
similarity index 100%
rename from include/asm-m68k/socket.h
rename to arch/m68k/include/asm/socket.h
diff --git a/include/asm-m68k/sockios.h b/arch/m68k/include/asm/sockios.h
similarity index 100%
rename from include/asm-m68k/sockios.h
rename to arch/m68k/include/asm/sockios.h
diff --git a/include/asm-m68k/spinlock.h b/arch/m68k/include/asm/spinlock.h
similarity index 100%
rename from include/asm-m68k/spinlock.h
rename to arch/m68k/include/asm/spinlock.h
diff --git a/include/asm-m68k/stat.h b/arch/m68k/include/asm/stat.h
similarity index 100%
rename from include/asm-m68k/stat.h
rename to arch/m68k/include/asm/stat.h
diff --git a/include/asm-m68k/statfs.h b/arch/m68k/include/asm/statfs.h
similarity index 100%
rename from include/asm-m68k/statfs.h
rename to arch/m68k/include/asm/statfs.h
diff --git a/arch/m68k/include/asm/string.h b/arch/m68k/include/asm/string.h
new file mode 100644
index 0000000..2c356f9
--- /dev/null
+++ b/arch/m68k/include/asm/string.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "string_no.h"
+#else
+#include "string_mm.h"
+#endif
diff --git a/include/asm-m68k/string.h b/arch/m68k/include/asm/string_mm.h
similarity index 100%
rename from include/asm-m68k/string.h
rename to arch/m68k/include/asm/string_mm.h
diff --git a/arch/m68knommu/include/asm/string.h b/arch/m68k/include/asm/string_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/string.h
rename to arch/m68k/include/asm/string_no.h
diff --git a/include/asm-m68k/sun3-head.h b/arch/m68k/include/asm/sun3-head.h
similarity index 100%
rename from include/asm-m68k/sun3-head.h
rename to arch/m68k/include/asm/sun3-head.h
diff --git a/include/asm-m68k/sun3_pgalloc.h b/arch/m68k/include/asm/sun3_pgalloc.h
similarity index 100%
rename from include/asm-m68k/sun3_pgalloc.h
rename to arch/m68k/include/asm/sun3_pgalloc.h
diff --git a/include/asm-m68k/sun3_pgtable.h b/arch/m68k/include/asm/sun3_pgtable.h
similarity index 100%
rename from include/asm-m68k/sun3_pgtable.h
rename to arch/m68k/include/asm/sun3_pgtable.h
diff --git a/include/asm-m68k/sun3ints.h b/arch/m68k/include/asm/sun3ints.h
similarity index 100%
rename from include/asm-m68k/sun3ints.h
rename to arch/m68k/include/asm/sun3ints.h
diff --git a/include/asm-m68k/sun3mmu.h b/arch/m68k/include/asm/sun3mmu.h
similarity index 100%
rename from include/asm-m68k/sun3mmu.h
rename to arch/m68k/include/asm/sun3mmu.h
diff --git a/include/asm-m68k/sun3x.h b/arch/m68k/include/asm/sun3x.h
similarity index 100%
rename from include/asm-m68k/sun3x.h
rename to arch/m68k/include/asm/sun3x.h
diff --git a/include/asm-m68k/sun3xflop.h b/arch/m68k/include/asm/sun3xflop.h
similarity index 100%
rename from include/asm-m68k/sun3xflop.h
rename to arch/m68k/include/asm/sun3xflop.h
diff --git a/include/asm-m68k/sun3xprom.h b/arch/m68k/include/asm/sun3xprom.h
similarity index 100%
rename from include/asm-m68k/sun3xprom.h
rename to arch/m68k/include/asm/sun3xprom.h
diff --git a/include/asm-m68k/suspend.h b/arch/m68k/include/asm/suspend.h
similarity index 100%
rename from include/asm-m68k/suspend.h
rename to arch/m68k/include/asm/suspend.h
diff --git a/arch/m68k/include/asm/swab.h b/arch/m68k/include/asm/swab.h
new file mode 100644
index 0000000..7d7dde1
--- /dev/null
+++ b/arch/m68k/include/asm/swab.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "swab_no.h"
+#else
+#include "swab_mm.h"
+#endif
diff --git a/include/asm-m68k/swab.h b/arch/m68k/include/asm/swab_mm.h
similarity index 100%
rename from include/asm-m68k/swab.h
rename to arch/m68k/include/asm/swab_mm.h
diff --git a/arch/m68knommu/include/asm/swab.h b/arch/m68k/include/asm/swab_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/swab.h
rename to arch/m68k/include/asm/swab_no.h
diff --git a/arch/m68k/include/asm/system.h b/arch/m68k/include/asm/system.h
new file mode 100644
index 0000000..ccea925
--- /dev/null
+++ b/arch/m68k/include/asm/system.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "system_no.h"
+#else
+#include "system_mm.h"
+#endif
diff --git a/include/asm-m68k/system.h b/arch/m68k/include/asm/system_mm.h
similarity index 100%
rename from include/asm-m68k/system.h
rename to arch/m68k/include/asm/system_mm.h
diff --git a/arch/m68knommu/include/asm/system.h b/arch/m68k/include/asm/system_no.h
similarity index 98%
rename from arch/m68knommu/include/asm/system.h
rename to arch/m68k/include/asm/system_no.h
index 40f49de..4496c0a 100644
--- a/arch/m68knommu/include/asm/system.h
+++ b/arch/m68k/include/asm/system_no.h
@@ -230,7 +230,7 @@
         jmp 0xf0000400;			\
         ");				\
 })
-#elif defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \
+#elif defined(CONFIG_NETtel) || \
       defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
 #define HARD_RESET_NOW() ({		\
         asm("				\
diff --git a/include/asm-m68k/termbits.h b/arch/m68k/include/asm/termbits.h
similarity index 100%
rename from include/asm-m68k/termbits.h
rename to arch/m68k/include/asm/termbits.h
diff --git a/include/asm-m68k/termios.h b/arch/m68k/include/asm/termios.h
similarity index 100%
rename from include/asm-m68k/termios.h
rename to arch/m68k/include/asm/termios.h
diff --git a/arch/m68k/include/asm/thread_info.h b/arch/m68k/include/asm/thread_info.h
new file mode 100644
index 0000000..f31a3f4
--- /dev/null
+++ b/arch/m68k/include/asm/thread_info.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "thread_info_no.h"
+#else
+#include "thread_info_mm.h"
+#endif
diff --git a/include/asm-m68k/thread_info.h b/arch/m68k/include/asm/thread_info_mm.h
similarity index 100%
rename from include/asm-m68k/thread_info.h
rename to arch/m68k/include/asm/thread_info_mm.h
diff --git a/arch/m68knommu/include/asm/thread_info.h b/arch/m68k/include/asm/thread_info_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/thread_info.h
rename to arch/m68k/include/asm/thread_info_no.h
diff --git a/arch/m68k/include/asm/timex.h b/arch/m68k/include/asm/timex.h
new file mode 100644
index 0000000..71976298
--- /dev/null
+++ b/arch/m68k/include/asm/timex.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "timex_no.h"
+#else
+#include "timex_mm.h"
+#endif
diff --git a/include/asm-m68k/timex.h b/arch/m68k/include/asm/timex_mm.h
similarity index 100%
rename from include/asm-m68k/timex.h
rename to arch/m68k/include/asm/timex_mm.h
diff --git a/arch/m68knommu/include/asm/timex.h b/arch/m68k/include/asm/timex_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/timex.h
rename to arch/m68k/include/asm/timex_no.h
diff --git a/include/asm-m68k/tlb.h b/arch/m68k/include/asm/tlb.h
similarity index 100%
rename from include/asm-m68k/tlb.h
rename to arch/m68k/include/asm/tlb.h
diff --git a/arch/m68k/include/asm/tlbflush.h b/arch/m68k/include/asm/tlbflush.h
new file mode 100644
index 0000000..b6f93b3
--- /dev/null
+++ b/arch/m68k/include/asm/tlbflush.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "tlbflush_no.h"
+#else
+#include "tlbflush_mm.h"
+#endif
diff --git a/include/asm-m68k/tlbflush.h b/arch/m68k/include/asm/tlbflush_mm.h
similarity index 100%
rename from include/asm-m68k/tlbflush.h
rename to arch/m68k/include/asm/tlbflush_mm.h
diff --git a/arch/m68knommu/include/asm/tlbflush.h b/arch/m68k/include/asm/tlbflush_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/tlbflush.h
rename to arch/m68k/include/asm/tlbflush_no.h
diff --git a/arch/m68knommu/include/asm/topology.h b/arch/m68k/include/asm/topology.h
similarity index 100%
rename from arch/m68knommu/include/asm/topology.h
rename to arch/m68k/include/asm/topology.h
diff --git a/arch/m68k/include/asm/traps.h b/arch/m68k/include/asm/traps.h
new file mode 100644
index 0000000..3011ec0
--- /dev/null
+++ b/arch/m68k/include/asm/traps.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "traps_no.h"
+#else
+#include "traps_mm.h"
+#endif
diff --git a/include/asm-m68k/traps.h b/arch/m68k/include/asm/traps_mm.h
similarity index 100%
rename from include/asm-m68k/traps.h
rename to arch/m68k/include/asm/traps_mm.h
diff --git a/arch/m68knommu/include/asm/traps.h b/arch/m68k/include/asm/traps_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/traps.h
rename to arch/m68k/include/asm/traps_no.h
diff --git a/include/asm-m68k/types.h b/arch/m68k/include/asm/types.h
similarity index 100%
rename from include/asm-m68k/types.h
rename to arch/m68k/include/asm/types.h
diff --git a/arch/m68k/include/asm/uaccess.h b/arch/m68k/include/asm/uaccess.h
new file mode 100644
index 0000000..38f92db
--- /dev/null
+++ b/arch/m68k/include/asm/uaccess.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "uaccess_no.h"
+#else
+#include "uaccess_mm.h"
+#endif
diff --git a/include/asm-m68k/uaccess.h b/arch/m68k/include/asm/uaccess_mm.h
similarity index 100%
rename from include/asm-m68k/uaccess.h
rename to arch/m68k/include/asm/uaccess_mm.h
diff --git a/arch/m68knommu/include/asm/uaccess.h b/arch/m68k/include/asm/uaccess_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/uaccess.h
rename to arch/m68k/include/asm/uaccess_no.h
diff --git a/arch/m68k/include/asm/ucontext.h b/arch/m68k/include/asm/ucontext.h
new file mode 100644
index 0000000..b53cd16
--- /dev/null
+++ b/arch/m68k/include/asm/ucontext.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "ucontext_no.h"
+#else
+#include "ucontext_mm.h"
+#endif
diff --git a/include/asm-m68k/ucontext.h b/arch/m68k/include/asm/ucontext_mm.h
similarity index 100%
rename from include/asm-m68k/ucontext.h
rename to arch/m68k/include/asm/ucontext_mm.h
diff --git a/arch/m68knommu/include/asm/ucontext.h b/arch/m68k/include/asm/ucontext_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/ucontext.h
rename to arch/m68k/include/asm/ucontext_no.h
diff --git a/arch/m68k/include/asm/unaligned.h b/arch/m68k/include/asm/unaligned.h
new file mode 100644
index 0000000..c640bba
--- /dev/null
+++ b/arch/m68k/include/asm/unaligned.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "unaligned_no.h"
+#else
+#include "unaligned_mm.h"
+#endif
diff --git a/include/asm-m68k/unaligned.h b/arch/m68k/include/asm/unaligned_mm.h
similarity index 100%
rename from include/asm-m68k/unaligned.h
rename to arch/m68k/include/asm/unaligned_mm.h
diff --git a/arch/m68knommu/include/asm/unaligned.h b/arch/m68k/include/asm/unaligned_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/unaligned.h
rename to arch/m68k/include/asm/unaligned_no.h
diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h
new file mode 100644
index 0000000..df1d9d4
--- /dev/null
+++ b/arch/m68k/include/asm/unistd.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "unistd_no.h"
+#else
+#include "unistd_mm.h"
+#endif
diff --git a/include/asm-m68k/unistd.h b/arch/m68k/include/asm/unistd_mm.h
similarity index 100%
rename from include/asm-m68k/unistd.h
rename to arch/m68k/include/asm/unistd_mm.h
diff --git a/arch/m68knommu/include/asm/unistd.h b/arch/m68k/include/asm/unistd_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/unistd.h
rename to arch/m68k/include/asm/unistd_no.h
diff --git a/include/asm-m68k/user.h b/arch/m68k/include/asm/user.h
similarity index 100%
rename from include/asm-m68k/user.h
rename to arch/m68k/include/asm/user.h
diff --git a/include/asm-m68k/virtconvert.h b/arch/m68k/include/asm/virtconvert.h
similarity index 100%
rename from include/asm-m68k/virtconvert.h
rename to arch/m68k/include/asm/virtconvert.h
diff --git a/include/asm-m68k/xor.h b/arch/m68k/include/asm/xor.h
similarity index 100%
rename from include/asm-m68k/xor.h
rename to arch/m68k/include/asm/xor.h
diff --git a/include/asm-m68k/zorro.h b/arch/m68k/include/asm/zorro.h
similarity index 100%
rename from include/asm-m68k/zorro.h
rename to arch/m68k/include/asm/zorro.h
diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S
index 5b78082..5c332f2 100644
--- a/arch/m68k/kernel/entry.S
+++ b/arch/m68k/kernel/entry.S
@@ -513,7 +513,7 @@
 	.long sys_uselib
 	.long sys_swapon
 	.long sys_reboot
-	.long old_readdir
+	.long sys_old_readdir
 	.long old_mmap		/* 90 */
 	.long sys_munmap
 	.long sys_truncate
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index 76b66fe..4beb59d 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -14,6 +14,10 @@
 	bool
 	default n
 
+config NO_DMA
+	bool
+	default y
+
 config FPU
 	bool
 	default n
@@ -398,12 +402,6 @@
 	help
 	  Support for the Motorola M5307C3 board.
 
-config eLIA
-	bool "Moreton Bay eLIA board support"
-	depends on M5307
-	help
-	  Support for the Moreton Bay eLIA board.
-
 config SECUREEDGEMP3
 	bool "SnapGear SecureEdge/MP3 platform support"
 	depends on M5307
@@ -697,25 +695,8 @@
 	depends on !M5272
 	default y
 
-menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
-
-config PCI
-	bool "PCI support"
-	help
-	  Support for PCI bus.
-
-config COMEMPCI
-	bool "CO-MEM lite PCI controller support"
-	depends on (M5307 || M5407)
-
-source "drivers/pci/Kconfig"
-
 source "drivers/pcmcia/Kconfig"
 
-source "drivers/pci/hotplug/Kconfig"
-
-endmenu
-
 menu "Executable file formats"
 
 source "fs/Kconfig.binfmt"
diff --git a/arch/m68knommu/Makefile b/arch/m68knommu/Makefile
index b63bbcf..fd0fb30 100644
--- a/arch/m68knommu/Makefile
+++ b/arch/m68knommu/Makefile
@@ -41,7 +41,6 @@
 board-$(CONFIG_M5275EVB)	:= M5275EVB
 board-$(CONFIG_M5282EVB)	:= M5282EVB
 board-$(CONFIG_ELITE)		:= eLITE
-board-$(CONFIG_eLIA)		:= eLIA
 board-$(CONFIG_NETtel)		:= NETtel
 board-$(CONFIG_SECUREEDGEMP3)	:= MP3
 board-$(CONFIG_CLEOPATRA)	:= CLEOPATRA
diff --git a/arch/m68knommu/include/asm/Kbuild b/arch/m68knommu/include/asm/Kbuild
deleted file mode 100644
index 58c02a4..0000000
--- a/arch/m68knommu/include/asm/Kbuild
+++ /dev/null
@@ -1,3 +0,0 @@
-include include/asm-generic/Kbuild.asm
-
-unifdef-y += swab.h
diff --git a/arch/m68knommu/include/asm/byteorder.h b/arch/m68knommu/include/asm/byteorder.h
deleted file mode 100644
index a6f0b8f7..0000000
--- a/arch/m68knommu/include/asm/byteorder.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef _M68KNOMMU_BYTEORDER_H
-#define _M68KNOMMU_BYTEORDER_H
-
-#include <asm/swab.h>
-#include <linux/byteorder/big_endian.h>
-
-#endif /* _M68KNOMMU_BYTEORDER_H */
diff --git a/arch/m68knommu/include/asm/cachectl.h b/arch/m68knommu/include/asm/cachectl.h
deleted file mode 100644
index bcf5a6a..0000000
--- a/arch/m68knommu/include/asm/cachectl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/cachectl.h>
diff --git a/arch/m68knommu/include/asm/cputime.h b/arch/m68knommu/include/asm/cputime.h
deleted file mode 100644
index a0c4a66..0000000
--- a/arch/m68knommu/include/asm/cputime.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __M68KNOMMU_CPUTIME_H
-#define __M68KNOMMU_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __M68KNOMMU_CPUTIME_H */
diff --git a/arch/m68knommu/include/asm/errno.h b/arch/m68knommu/include/asm/errno.h
deleted file mode 100644
index 7e8c22b..0000000
--- a/arch/m68knommu/include/asm/errno.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/errno.h>
diff --git a/arch/m68knommu/include/asm/fcntl.h b/arch/m68knommu/include/asm/fcntl.h
deleted file mode 100644
index f6a552c..0000000
--- a/arch/m68knommu/include/asm/fcntl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/fcntl.h>
diff --git a/arch/m68knommu/include/asm/hwtest.h b/arch/m68knommu/include/asm/hwtest.h
deleted file mode 100644
index 700626a..0000000
--- a/arch/m68knommu/include/asm/hwtest.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/hwtest.h>
diff --git a/arch/m68knommu/include/asm/ioctls.h b/arch/m68knommu/include/asm/ioctls.h
deleted file mode 100644
index 0b1eb4d..0000000
--- a/arch/m68knommu/include/asm/ioctls.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/ioctls.h>
diff --git a/arch/m68knommu/include/asm/ipcbuf.h b/arch/m68knommu/include/asm/ipcbuf.h
deleted file mode 100644
index e4a7be6..0000000
--- a/arch/m68knommu/include/asm/ipcbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/ipcbuf.h>
diff --git a/arch/m68knommu/include/asm/linkage.h b/arch/m68knommu/include/asm/linkage.h
deleted file mode 100644
index c288a19..0000000
--- a/arch/m68knommu/include/asm/linkage.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/linkage.h>
diff --git a/arch/m68knommu/include/asm/local.h b/arch/m68knommu/include/asm/local.h
deleted file mode 100644
index 84a39c1..0000000
--- a/arch/m68knommu/include/asm/local.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __M68KNOMMU_LOCAL_H
-#define __M68KNOMMU_LOCAL_H
-
-#include <asm-generic/local.h>
-
-#endif /* __M68KNOMMU_LOCAL_H */
diff --git a/arch/m68knommu/include/asm/math-emu.h b/arch/m68knommu/include/asm/math-emu.h
deleted file mode 100644
index 7e70905..0000000
--- a/arch/m68knommu/include/asm/math-emu.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/math-emu.h>
diff --git a/arch/m68knommu/include/asm/md.h b/arch/m68knommu/include/asm/md.h
deleted file mode 100644
index d810c78..0000000
--- a/arch/m68knommu/include/asm/md.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/md.h>
diff --git a/arch/m68knommu/include/asm/mman.h b/arch/m68knommu/include/asm/mman.h
deleted file mode 100644
index 4846c68..0000000
--- a/arch/m68knommu/include/asm/mman.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/mman.h>
diff --git a/arch/m68knommu/include/asm/movs.h b/arch/m68knommu/include/asm/movs.h
deleted file mode 100644
index 81a1677..0000000
--- a/arch/m68knommu/include/asm/movs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/movs.h>
diff --git a/arch/m68knommu/include/asm/msgbuf.h b/arch/m68knommu/include/asm/msgbuf.h
deleted file mode 100644
index bdfadec4..0000000
--- a/arch/m68knommu/include/asm/msgbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/msgbuf.h>
diff --git a/arch/m68knommu/include/asm/openprom.h b/arch/m68knommu/include/asm/openprom.h
deleted file mode 100644
index fdba795..0000000
--- a/arch/m68knommu/include/asm/openprom.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/openprom.h>
diff --git a/arch/m68knommu/include/asm/oplib.h b/arch/m68knommu/include/asm/oplib.h
deleted file mode 100644
index ce079dc..0000000
--- a/arch/m68knommu/include/asm/oplib.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/oplib.h>
diff --git a/arch/m68knommu/include/asm/percpu.h b/arch/m68knommu/include/asm/percpu.h
deleted file mode 100644
index 5de72c3..0000000
--- a/arch/m68knommu/include/asm/percpu.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ARCH_M68KNOMMU_PERCPU__
-#define __ARCH_M68KNOMMU_PERCPU__
-
-#include <asm-generic/percpu.h>
-
-#endif /* __ARCH_M68KNOMMU_PERCPU__ */
diff --git a/arch/m68knommu/include/asm/poll.h b/arch/m68knommu/include/asm/poll.h
deleted file mode 100644
index ee1b6cb..0000000
--- a/arch/m68knommu/include/asm/poll.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/poll.h>
diff --git a/arch/m68knommu/include/asm/posix_types.h b/arch/m68knommu/include/asm/posix_types.h
deleted file mode 100644
index 6205fb9..0000000
--- a/arch/m68knommu/include/asm/posix_types.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/posix_types.h>
diff --git a/arch/m68knommu/include/asm/resource.h b/arch/m68knommu/include/asm/resource.h
deleted file mode 100644
index 7fa63d5..0000000
--- a/arch/m68knommu/include/asm/resource.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/resource.h>
diff --git a/arch/m68knommu/include/asm/rtc.h b/arch/m68knommu/include/asm/rtc.h
deleted file mode 100644
index eaf18ec..0000000
--- a/arch/m68knommu/include/asm/rtc.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/rtc.h>
diff --git a/arch/m68knommu/include/asm/sections.h b/arch/m68knommu/include/asm/sections.h
deleted file mode 100644
index dd0ecb9..0000000
--- a/arch/m68knommu/include/asm/sections.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef _M68KNOMMU_SECTIONS_H
-#define _M68KNOMMU_SECTIONS_H
-
-/* nothing to see, move along */
-#include <asm-generic/sections.h>
-
-#endif
diff --git a/arch/m68knommu/include/asm/sembuf.h b/arch/m68knommu/include/asm/sembuf.h
deleted file mode 100644
index 3a634f9..0000000
--- a/arch/m68knommu/include/asm/sembuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/sembuf.h>
diff --git a/arch/m68knommu/include/asm/shm.h b/arch/m68knommu/include/asm/shm.h
deleted file mode 100644
index cc8e522..0000000
--- a/arch/m68knommu/include/asm/shm.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/shm.h>
diff --git a/arch/m68knommu/include/asm/shmbuf.h b/arch/m68knommu/include/asm/shmbuf.h
deleted file mode 100644
index bc34cf8..0000000
--- a/arch/m68knommu/include/asm/shmbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/shmbuf.h>
diff --git a/arch/m68knommu/include/asm/shmparam.h b/arch/m68knommu/include/asm/shmparam.h
deleted file mode 100644
index d7ee696..0000000
--- a/arch/m68knommu/include/asm/shmparam.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/shmparam.h>
diff --git a/arch/m68knommu/include/asm/socket.h b/arch/m68knommu/include/asm/socket.h
deleted file mode 100644
index ac5478b..0000000
--- a/arch/m68knommu/include/asm/socket.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/socket.h>
diff --git a/arch/m68knommu/include/asm/sockios.h b/arch/m68knommu/include/asm/sockios.h
deleted file mode 100644
index dcc6a89..0000000
--- a/arch/m68knommu/include/asm/sockios.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/sockios.h>
diff --git a/arch/m68knommu/include/asm/spinlock.h b/arch/m68knommu/include/asm/spinlock.h
deleted file mode 100644
index 6bb1f06..0000000
--- a/arch/m68knommu/include/asm/spinlock.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/spinlock.h>
diff --git a/arch/m68knommu/include/asm/stat.h b/arch/m68knommu/include/asm/stat.h
deleted file mode 100644
index 3d4b260..0000000
--- a/arch/m68knommu/include/asm/stat.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/stat.h>
diff --git a/arch/m68knommu/include/asm/statfs.h b/arch/m68knommu/include/asm/statfs.h
deleted file mode 100644
index 2ce99ea..0000000
--- a/arch/m68knommu/include/asm/statfs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/statfs.h>
diff --git a/arch/m68knommu/include/asm/termbits.h b/arch/m68knommu/include/asm/termbits.h
deleted file mode 100644
index 05dd6bc..0000000
--- a/arch/m68knommu/include/asm/termbits.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/termbits.h>
diff --git a/arch/m68knommu/include/asm/termios.h b/arch/m68knommu/include/asm/termios.h
deleted file mode 100644
index e733788..0000000
--- a/arch/m68knommu/include/asm/termios.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/termios.h>
diff --git a/arch/m68knommu/include/asm/tlb.h b/arch/m68knommu/include/asm/tlb.h
deleted file mode 100644
index 77a7c51..0000000
--- a/arch/m68knommu/include/asm/tlb.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/tlb.h>
diff --git a/arch/m68knommu/include/asm/types.h b/arch/m68knommu/include/asm/types.h
deleted file mode 100644
index 031238c..0000000
--- a/arch/m68knommu/include/asm/types.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/types.h>
diff --git a/arch/m68knommu/include/asm/user.h b/arch/m68knommu/include/asm/user.h
deleted file mode 100644
index a5a555b..0000000
--- a/arch/m68knommu/include/asm/user.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/user.h>
diff --git a/arch/m68knommu/kernel/Makefile b/arch/m68knommu/kernel/Makefile
index f0eab3d..37c3fc0 100644
--- a/arch/m68knommu/kernel/Makefile
+++ b/arch/m68knommu/kernel/Makefile
@@ -8,4 +8,3 @@
 	 setup.o signal.o syscalltable.o sys_m68k.o time.o traps.o
 
 obj-$(CONFIG_MODULES)	+= module.o
-obj-$(CONFIG_COMEMPCI)	+= comempci.o
diff --git a/arch/m68knommu/kernel/comempci.c b/arch/m68knommu/kernel/comempci.c
deleted file mode 100644
index 0a68b5a..0000000
--- a/arch/m68knommu/kernel/comempci.c
+++ /dev/null
@@ -1,980 +0,0 @@
-/*****************************************************************************/
-
-/*
- *	comemlite.c -- PCI access code for embedded CO-MEM Lite PCI controller.
- *
- *	(C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com).
- *	(C) Copyright 2000, Lineo (www.lineo.com)
- */
-
-/*****************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/ptrace.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/irq.h>
-#include <asm/anchor.h>
-
-#ifdef CONFIG_eLIA
-#include <asm/elia.h>
-#endif
-
-/*****************************************************************************/
-
-/*
- *	Debug configuration defines. DEBUGRES sets debugging output for
- *	the resource allocation phase. DEBUGPCI traces on pcibios_ function
- *	calls, and DEBUGIO traces all accesses to devices on the PCI bus.
- */
-/*#define	DEBUGRES	1*/
-/*#define	DEBUGPCI	1*/
-/*#define	DEBUGIO		1*/
-
-/*****************************************************************************/
-
-/*
- *	PCI markers for bus present and active slots.
- */
-int		pci_bus_is_present = 0;
-unsigned long	pci_slotmask = 0;
-
-/*
- *	We may or may not need to swap the bytes of PCI bus tranfers.
- *	The endianess is re-roder automatically by the CO-MEM, but it
- *	will get the wrong byte order for a pure data stream.
- */
-#define	pci_byteswap	0
-
-
-/*
- *	Resource tracking. The CO-MEM part creates a virtual address
- *	space that all the PCI devices live in - it is not in any way
- *	directly mapped into the ColdFire address space. So we can
- *	really assign any resources we like to devices, as long as
- *	they do not clash with other PCI devices.
- */
-unsigned int	pci_iobase = PCIBIOS_MIN_IO;	/* Arbitrary start address */
-unsigned int	pci_membase = PCIBIOS_MIN_MEM;	/* Arbitrary start address */
-
-#define	PCI_MINIO	0x100			/* 256 byte minimum I/O */
-#define	PCI_MINMEM	0x00010000		/* 64k minimum chunk */
-
-/*
- *	The CO-MEM's shared memory segment is visible inside the PCI
- *	memory address space. We need to keep track of the address that
- *	this is mapped at, to setup the bus masters pointers.
- */
-unsigned int	pci_shmemaddr;
-
-/*****************************************************************************/
-
-void	pci_interrupt(int irq, void *id, struct pt_regs *fp);
-
-/*****************************************************************************/
-
-/*
- *	Some platforms have custom ways of reseting the PCI bus.
- */
-
-void pci_resetbus(void)
-{
-#ifdef CONFIG_eLIA
-	int	i;
-
-#ifdef DEBUGPCI
-	printk(KERN_DEBUG "pci_resetbus()\n");
-#endif
-
-	*((volatile unsigned short *) (MCF_MBAR+MCFSIM_PADDR)) |= eLIA_PCIRESET;
-	for (i = 0; (i < 1000); i++) {
-		*((volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT)) = 
-			(ppdata | eLIA_PCIRESET);
-	}
-
-
-	*((volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT)) = ppdata;
-#endif
-}
-
-/*****************************************************************************/
-
-int pcibios_assign_resource_slot(int slot)
-{
-	volatile unsigned long	*rp;
-	volatile unsigned char	*ip;
-	unsigned int		idsel, addr, val, align, i;
-	int			bar;
-
-#ifdef DEBUGPCI
-	printk(KERN_INFO "pcibios_assign_resource_slot(slot=%x)\n", slot);
-#endif
-
-	rp = (volatile unsigned long *) COMEM_BASE;
-	idsel = COMEM_DA_ADDR(0x1 << (slot + 16));
-
-	/* Try to assign resource to each BAR */
-	for (bar = 0; (bar < 6); bar++) {
-		addr = COMEM_PCIBUS + PCI_BASE_ADDRESS_0 + (bar * 4);
-		rp[LREG(COMEM_DAHBASE)] = COMEM_DA_CFGRD | idsel;
-		val = rp[LREG(addr)];
-#ifdef DEBUGRES
-		printk(KERN_DEBUG "-----------------------------------"
-			"-------------------------------------\n");
-		printk(KERN_DEBUG "BAR[%d]: read=%08x ", bar, val);
-#endif
-
-		rp[LREG(COMEM_DAHBASE)] = COMEM_DA_CFGWR | idsel;
-		rp[LREG(addr)] = 0xffffffff;
-
-		rp[LREG(COMEM_DAHBASE)] = COMEM_DA_CFGRD | idsel;
-		val = rp[LREG(addr)];
-#ifdef DEBUGRES
-		printk(KERN_DEBUG "write=%08x ", val);
-#endif
-		if (val == 0) {
-#ifdef DEBUGRES
-			printk(KERN_DEBUG "\n");
-#endif
-			continue;
-		}
-
-		/* Determine space required by BAR */
-		/* FIXME: this should go backwords from 0x80000000... */
-		for (i = 0; (i < 32); i++) {
-			if ((0x1 << i) & (val & 0xfffffffc))
-				break;
-		}
-
-#ifdef DEBUGRES
-		printk(KERN_DEBUG "size=%08x(%d)\n", (0x1 << i), i);
-#endif
-		i = 0x1 << i;
-
-		/* Assign a resource */
-		if (val & PCI_BASE_ADDRESS_SPACE_IO) {
-			if (i < PCI_MINIO)
-				i = PCI_MINIO;
-#ifdef DEBUGRES
-			printk(KERN_DEBUG "BAR[%d]: IO size=%08x iobase=%08x\n",
-				bar, i, pci_iobase);
-#endif
-			if (i > 0xffff) {
-				/* Invalid size?? */
-				val = 0 | PCI_BASE_ADDRESS_SPACE_IO;
-#ifdef DEBUGRES
-				printk(KERN_DEBUG "BAR[%d]: too big for IO??\n", bar);
-#endif
-			} else {
-				/* Check for un-alignment */
-				if ((align = pci_iobase % i))
-					pci_iobase += (i - align);
-				val = pci_iobase | PCI_BASE_ADDRESS_SPACE_IO;
-				pci_iobase += i;
-			}
-		} else {
-			if (i < PCI_MINMEM)
-				i = PCI_MINMEM;
-#ifdef DEBUGRES
-			printk(KERN_DEBUG "BAR[%d]: MEMORY size=%08x membase=%08x\n",
-				bar, i, pci_membase);
-#endif
-			/* Check for un-alignment */
-			if ((align = pci_membase % i))
-				pci_membase += (i - align);
-			val = pci_membase | PCI_BASE_ADDRESS_SPACE_MEMORY;
-			pci_membase += i;
-		}
-
-		/* Write resource back into BAR register */
-		rp[LREG(COMEM_DAHBASE)] = COMEM_DA_CFGWR | idsel;
-		rp[LREG(addr)] = val;
-#ifdef DEBUGRES
-		printk(KERN_DEBUG "BAR[%d]: assigned bar=%08x\n", bar, val);
-#endif
-	}
-
-#ifdef DEBUGRES
-	printk(KERN_DEBUG "-----------------------------------"
-			"-------------------------------------\n");
-#endif
-
-	/* Assign IRQ if one is wanted... */
-	ip = (volatile unsigned char *) (COMEM_BASE + COMEM_PCIBUS);
-	rp[LREG(COMEM_DAHBASE)] = COMEM_DA_CFGRD | idsel;
-
-	addr = (PCI_INTERRUPT_PIN & 0xfc) + (~PCI_INTERRUPT_PIN & 0x03);
-	if (ip[addr]) {
-		rp[LREG(COMEM_DAHBASE)] = COMEM_DA_CFGWR | idsel;
-		addr = (PCI_INTERRUPT_LINE & 0xfc)+(~PCI_INTERRUPT_LINE & 0x03);
-		ip[addr] = 25;
-#ifdef DEBUGRES
-		printk(KERN_DEBUG "IRQ LINE=25\n");
-#endif
-	}
-
-	return(0);
-}
-
-/*****************************************************************************/
-
-int pcibios_enable_slot(int slot)
-{
-	volatile unsigned long	*rp;
-	volatile unsigned short	*wp;
-	unsigned int		idsel, addr;
-	unsigned short		cmd;
-
-#ifdef DEBUGPCI
-	printk(KERN_DEBUG "pcibios_enbale_slot(slot=%x)\n", slot);
-#endif
-
-	rp = (volatile unsigned long *) COMEM_BASE;
-	wp = (volatile unsigned short *) COMEM_BASE;
-	idsel = COMEM_DA_ADDR(0x1 << (slot + 16));
-
-	/* Get current command settings */
-	addr = COMEM_PCIBUS + PCI_COMMAND;
-	addr = (addr & ~0x3) + (~addr & 0x02);
-	rp[LREG(COMEM_DAHBASE)] = COMEM_DA_CFGRD | idsel;
-	cmd = wp[WREG(addr)];
-	/*val = ((val & 0xff) << 8) | ((val >> 8) & 0xff);*/
-
-	/* Enable I/O and memory accesses to this device */
-	rp[LREG(COMEM_DAHBASE)] = COMEM_DA_CFGWR | idsel;
-	cmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
-	wp[WREG(addr)] = cmd;
-
-	return(0);
-}
-
-/*****************************************************************************/
-
-void pcibios_assign_resources(void)
-{
-	volatile unsigned long	*rp;
-	unsigned long		sel, id;
-	int			slot;
-
-	rp = (volatile unsigned long *) COMEM_BASE;
-
-	/*
-	 *	Do a quick scan of the PCI bus and see what is here.
-	 */
-	for (slot = COMEM_MINDEV; (slot <= COMEM_MAXDEV); slot++) {
-		sel = COMEM_DA_CFGRD | COMEM_DA_ADDR(0x1 << (slot + 16));
-		rp[LREG(COMEM_DAHBASE)] = sel;
-		rp[LREG(COMEM_PCIBUS)] = 0; /* Clear bus */
-		id = rp[LREG(COMEM_PCIBUS)];
-		if ((id != 0) && ((id & 0xffff0000) != (sel & 0xffff0000))) {
-			printk(KERN_INFO "PCI: slot=%d id=%08x\n", slot, (int) id);
-			pci_slotmask |= 0x1 << slot;
-			pcibios_assign_resource_slot(slot);
-			pcibios_enable_slot(slot);
-		}
-	}
-}
-
-/*****************************************************************************/
-
-int pcibios_init(void)
-{
-	volatile unsigned long	*rp;
-	unsigned long		sel, id;
-	int			slot;
-
-#ifdef DEBUGPCI
-	printk(KERN_DEBUG "pcibios_init()\n");
-#endif
-
-	pci_resetbus();
-
-	/*
-	 *	Do some sort of basic check to see if the CO-MEM part
-	 *	is present... This works ok, but I think we really need
-	 *	something better...
-	 */
-	rp = (volatile unsigned long *) COMEM_BASE;
-	if ((rp[LREG(COMEM_LBUSCFG)] & 0xff) != 0x50) {
-		printk(KERN_INFO "PCI: no PCI bus present\n");
-		return(0);
-	}
-
-#ifdef COMEM_BRIDGEDEV
-	/*
-	 *	Setup the PCI bridge device first. It needs resources too,
-	 *	so that bus masters can get to its shared memory.
-	 */
-	slot = COMEM_BRIDGEDEV;
-	sel = COMEM_DA_CFGRD | COMEM_DA_ADDR(0x1 << (slot + 16));
-	rp[LREG(COMEM_DAHBASE)] = sel;
-	rp[LREG(COMEM_PCIBUS)] = 0; /* Clear bus */
-	id = rp[LREG(COMEM_PCIBUS)];
-	if ((id == 0) || ((id & 0xffff0000) == (sel & 0xffff0000))) {
-		printk(KERN_INFO "PCI: no PCI bus bridge present\n");
-		return(0);
-	}
-
-	printk(KERN_INFO "PCI: bridge device at slot=%d id=%08x\n", slot, (int) id);
-	pci_slotmask |= 0x1 << slot;
-	pci_shmemaddr = pci_membase;
-	pcibios_assign_resource_slot(slot);
-	pcibios_enable_slot(slot);
-#endif
-
-	pci_bus_is_present = 1;
-
-	/* Get PCI irq for local vectoring */
-	if (request_irq(COMEM_IRQ, pci_interrupt, 0, "PCI bridge", NULL)) {
-		printk(KERN_WARNING "PCI: failed to acquire interrupt %d\n", COMEM_IRQ);
-	} else {
-		mcf_autovector(COMEM_IRQ);
-	}
-
-	pcibios_assign_resources();
-
-	return(0);
-}
-
-/*****************************************************************************/
-
-char *pcibios_setup(char *option)
-{
-	/* Nothing for us to handle. */
-	return(option);
-}
-/*****************************************************************************/
-
-void pcibios_fixup_bus(struct pci_bus *b)
-{
-}
-
-/*****************************************************************************/
-
-void pcibios_align_resource(void *data, struct resource *res,
-				resource_size_t size, resource_size_t align)
-{
-}
-
-/*****************************************************************************/
-
-int pcibios_enable_device(struct pci_dev *dev, int mask)
-{
-	int slot;
-
-	slot = PCI_SLOT(dev->devfn);
-	if ((dev->bus == 0) && (pci_slotmask & (1 << slot)))
-		pcibios_enable_slot(slot);
-	return(0);
-}
-
-/*****************************************************************************/
-
-/*
- *	Local routines to interrcept the standard I/O and vector handling
- *	code. Don't include this 'till now - initialization code above needs
- *	access to the real code too.
- */
-#include <asm/mcfpci.h>
-
-/*****************************************************************************/
-
-void pci_outb(unsigned char val, unsigned int addr)
-{
-	volatile unsigned long	*rp;
-	volatile unsigned char	*bp;
-
-#ifdef DEBUGIO
-	printk(KERN_DEBUG "pci_outb(val=%02x,addr=%x)\n", val, addr);
-#endif
-
-	rp = (volatile unsigned long *) COMEM_BASE;
-	bp = (volatile unsigned char *) COMEM_BASE;
-	rp[LREG(COMEM_DAHBASE)] = COMEM_DA_IOWR | COMEM_DA_ADDR(addr);
-	addr = (addr & ~0x3) + (~addr & 0x03);
-	bp[(COMEM_PCIBUS + COMEM_DA_OFFSET(addr))] = val;
-}
-
-/*****************************************************************************/
-
-void pci_outw(unsigned short val, unsigned int addr)
-{
-	volatile unsigned long	*rp;
-	volatile unsigned short	*sp;
-
-#ifdef DEBUGIO
-	printk(KERN_DEBUG "pci_outw(val=%04x,addr=%x)\n", val, addr);
-#endif
-
-	rp = (volatile unsigned long *) COMEM_BASE;
-	sp = (volatile unsigned short *) COMEM_BASE;
-	rp[LREG(COMEM_DAHBASE)] = COMEM_DA_IOWR | COMEM_DA_ADDR(addr);
-	addr = (addr & ~0x3) + (~addr & 0x02);
-	if (pci_byteswap)
-		val = ((val & 0xff) << 8) | ((val >> 8) & 0xff);
-	sp[WREG(COMEM_PCIBUS + COMEM_DA_OFFSET(addr))] = val;
-}
-
-/*****************************************************************************/
-
-void pci_outl(unsigned int val, unsigned int addr)
-{
-	volatile unsigned long	*rp;
-	volatile unsigned int	*lp;
-
-#ifdef DEBUGIO
-	printk(KERN_DEBUG "pci_outl(val=%08x,addr=%x)\n", val, addr);
-#endif
-
-	rp = (volatile unsigned long *) COMEM_BASE;
-	lp = (volatile unsigned int *) COMEM_BASE;
-	rp[LREG(COMEM_DAHBASE)] = COMEM_DA_IOWR | COMEM_DA_ADDR(addr);
-
-	if (pci_byteswap)
-		val = (val << 24) | ((val & 0x0000ff00) << 8) |
-			((val & 0x00ff0000) >> 8) | (val >> 24);
-
-	lp[LREG(COMEM_PCIBUS + COMEM_DA_OFFSET(addr))] = val;
-}
-
-/*****************************************************************************/
-
-unsigned long	pci_blmask[] = {
-	0x000000e0,
-	0x000000d0,
-	0x000000b0,
-	0x00000070
-};
-
-unsigned char pci_inb(unsigned int addr)
-{
-	volatile unsigned long	*rp;
-	volatile unsigned char	*bp;
-	unsigned long		r;
-	unsigned char		val;
-
-#ifdef DEBUGIO
-	printk(KERN_DEBUG "pci_inb(addr=%x)\n", addr);
-#endif
-
-	rp = (volatile unsigned long *) COMEM_BASE;
-	bp = (volatile unsigned char *) COMEM_BASE;
-
-	r = COMEM_DA_IORD | COMEM_DA_ADDR(addr) | pci_blmask[(addr & 0x3)];
-	rp[LREG(COMEM_DAHBASE)] = r;
-
-	addr = (addr & ~0x3) + (~addr & 0x3);
-	val = bp[(COMEM_PCIBUS + COMEM_DA_OFFSET(addr))];
-	return(val);
-}
-
-/*****************************************************************************/
-
-unsigned long	pci_bwmask[] = {
-	0x000000c0,
-	0x000000c0,
-	0x00000030,
-	0x00000030
-};
-
-unsigned short pci_inw(unsigned int addr)
-{
-	volatile unsigned long	*rp;
-	volatile unsigned short	*sp;
-	unsigned long		r;
-	unsigned short		val;
-
-#ifdef DEBUGIO
-	printk(KERN_DEBUG "pci_inw(addr=%x)", addr);
-#endif
-
-	rp = (volatile unsigned long *) COMEM_BASE;
-	r = COMEM_DA_IORD | COMEM_DA_ADDR(addr) | pci_bwmask[(addr & 0x3)];
-	rp[LREG(COMEM_DAHBASE)] = r;
-
-	sp = (volatile unsigned short *) COMEM_BASE;
-	addr = (addr & ~0x3) + (~addr & 0x02);
-	val = sp[WREG(COMEM_PCIBUS + COMEM_DA_OFFSET(addr))];
-	if (pci_byteswap)
-		val = ((val & 0xff) << 8) | ((val >> 8) & 0xff);
-#ifdef DEBUGIO
-	printk(KERN_DEBUG "=%04x\n", val);
-#endif
-	return(val);
-}
-
-/*****************************************************************************/
-
-unsigned int pci_inl(unsigned int addr)
-{
-	volatile unsigned long	*rp;
-	volatile unsigned int	*lp;
-	unsigned int		val;
-
-#ifdef DEBUGIO
-	printk(KERN_DEBUG "pci_inl(addr=%x)", addr);
-#endif
-
-	rp = (volatile unsigned long *) COMEM_BASE;
-	lp = (volatile unsigned int *) COMEM_BASE;
-	rp[LREG(COMEM_DAHBASE)] = COMEM_DA_IORD | COMEM_DA_ADDR(addr);
-	val = lp[LREG(COMEM_PCIBUS + COMEM_DA_OFFSET(addr))];
-
-	if (pci_byteswap)
-		val = (val << 24) | ((val & 0x0000ff00) << 8) |
-			((val & 0x00ff0000) >> 8) | (val >> 24);
-
-#ifdef DEBUGIO
-	printk(KERN_DEBUG "=%08x\n", val);
-#endif
-	return(val);
-}
-
-/*****************************************************************************/
-
-void pci_outsb(void *addr, void *buf, int len)
-{
-	volatile unsigned long	*rp;
-	volatile unsigned char	*bp;
-	unsigned char		*dp = (unsigned char *) buf;
-	unsigned int		a = (unsigned int) addr;
-
-#ifdef DEBUGIO
-	printk(KERN_DEBUG "pci_outsb(addr=%x,buf=%x,len=%d)\n", (int)addr, (int)buf, len);
-#endif
-
-	rp = (volatile unsigned long *) COMEM_BASE;
-	rp[LREG(COMEM_DAHBASE)] = COMEM_DA_IOWR | COMEM_DA_ADDR(a);
-
-	a = (a & ~0x3) + (~a & 0x03);
-	bp = (volatile unsigned char *)
-		(COMEM_BASE + COMEM_PCIBUS + COMEM_DA_OFFSET(a));
-
-	while (len--)
-		*bp = *dp++;
-}
-
-/*****************************************************************************/
-
-void pci_outsw(void *addr, void *buf, int len)
-{
-	volatile unsigned long	*rp;
-	volatile unsigned short	*wp;
-	unsigned short		w, *dp = (unsigned short *) buf;
-	unsigned int		a = (unsigned int) addr;
-
-#ifdef DEBUGIO
-	printk(KERN_DEBUG "pci_outsw(addr=%x,buf=%x,len=%d)\n", (int)addr, (int)buf, len);
-#endif
-
-	rp = (volatile unsigned long *) COMEM_BASE;
-	rp[LREG(COMEM_DAHBASE)] = COMEM_DA_IOWR | COMEM_DA_ADDR(a);
-
-	a = (a & ~0x3) + (~a & 0x2);
-	wp = (volatile unsigned short *)
-		(COMEM_BASE + COMEM_PCIBUS + COMEM_DA_OFFSET(a));
-
-	while (len--) {
-		w = *dp++;
-		if (pci_byteswap)
-			w = ((w & 0xff) << 8) | ((w >> 8) & 0xff);
-		*wp = w;
-	}
-}
-
-/*****************************************************************************/
-
-void pci_outsl(void *addr, void *buf, int len)
-{
-	volatile unsigned long	*rp;
-	volatile unsigned long	*lp;
-	unsigned long		l, *dp = (unsigned long *) buf;
-	unsigned int		a = (unsigned int) addr;
-
-#ifdef DEBUGIO
-	printk(KERN_DEBUG "pci_outsl(addr=%x,buf=%x,len=%d)\n", (int)addr, (int)buf, len);
-#endif
-
-	rp = (volatile unsigned long *) COMEM_BASE;
-	rp[LREG(COMEM_DAHBASE)] = COMEM_DA_IOWR | COMEM_DA_ADDR(a);
-
-	lp = (volatile unsigned long *)
-		(COMEM_BASE + COMEM_PCIBUS + COMEM_DA_OFFSET(a));
-
-	while (len--) {
-		l = *dp++;
-		if (pci_byteswap)
-			l = (l << 24) | ((l & 0x0000ff00) << 8) |
-				((l & 0x00ff0000) >> 8) | (l >> 24);
-		*lp = l;
-	}
-}
-
-/*****************************************************************************/
-
-void pci_insb(void *addr, void *buf, int len)
-{
-	volatile unsigned long	*rp;
-	volatile unsigned char	*bp;
-	unsigned char		*dp = (unsigned char *) buf;
-	unsigned int		a = (unsigned int) addr;
-
-#ifdef DEBUGIO
-	printk(KERN_DEBUG "pci_insb(addr=%x,buf=%x,len=%d)\n", (int)addr, (int)buf, len);
-#endif
-
-	rp = (volatile unsigned long *) COMEM_BASE;
-	rp[LREG(COMEM_DAHBASE)] = COMEM_DA_IORD | COMEM_DA_ADDR(a);
-
-	a = (a & ~0x3) + (~a & 0x03);
-	bp = (volatile unsigned char *)
-		(COMEM_BASE + COMEM_PCIBUS + COMEM_DA_OFFSET(a));
-
-	while (len--)
-		*dp++ = *bp;
-}
-
-/*****************************************************************************/
-
-void pci_insw(void *addr, void *buf, int len)
-{
-	volatile unsigned long	*rp;
-	volatile unsigned short	*wp;
-	unsigned short		w, *dp = (unsigned short *) buf;
-	unsigned int		a = (unsigned int) addr;
-
-#ifdef DEBUGIO
-	printk(KERN_DEBUG "pci_insw(addr=%x,buf=%x,len=%d)\n", (int)addr, (int)buf, len);
-#endif
-
-	rp = (volatile unsigned long *) COMEM_BASE;
-	rp[LREG(COMEM_DAHBASE)] = COMEM_DA_IORD | COMEM_DA_ADDR(a);
-
-	a = (a & ~0x3) + (~a & 0x2);
-	wp = (volatile unsigned short *)
-		(COMEM_BASE + COMEM_PCIBUS + COMEM_DA_OFFSET(a));
-
-	while (len--) {
-		w = *wp;
-		if (pci_byteswap)
-			w = ((w & 0xff) << 8) | ((w >> 8) & 0xff);
-		*dp++ = w;
-	}
-}
-
-/*****************************************************************************/
-
-void pci_insl(void *addr, void *buf, int len)
-{
-	volatile unsigned long	*rp;
-	volatile unsigned long	*lp;
-	unsigned long		l, *dp = (unsigned long *) buf;
-	unsigned int		a = (unsigned int) addr;
-
-#ifdef DEBUGIO
-	printk(KERN_DEBUG "pci_insl(addr=%x,buf=%x,len=%d)\n", (int)addr, (int)buf, len);
-#endif
-
-	rp = (volatile unsigned long *) COMEM_BASE;
-	rp[LREG(COMEM_DAHBASE)] = COMEM_DA_IORD | COMEM_DA_ADDR(a);
-
-	lp = (volatile unsigned long *)
-		(COMEM_BASE + COMEM_PCIBUS + COMEM_DA_OFFSET(a));
-
-	while (len--) {
-		l = *lp;
-		if (pci_byteswap)
-			l = (l << 24) | ((l & 0x0000ff00) << 8) |
-				((l & 0x00ff0000) >> 8) | (l >> 24);
-		*dp++ = l;
-	}
-}
-
-/*****************************************************************************/
-
-struct pci_localirqlist {
-	void		(*handler)(int, void *, struct pt_regs *);
-	const char	*device;
-	void		*dev_id;
-};
-
-struct pci_localirqlist	pci_irqlist[COMEM_MAXPCI];
-
-/*****************************************************************************/
-
-int pci_request_irq(unsigned int irq,
-	void (*handler)(int, void *, struct pt_regs *),
-	unsigned long flags, const char *device, void *dev_id)
-{
-	int	i;
-
-#ifdef DEBUGIO
-	printk(KERN_DEBUG "pci_request_irq(irq=%d,handler=%x,flags=%x,device=%s,"
-		"dev_id=%x)\n", irq, (int) handler, (int) flags, device,
-		(int) dev_id);
-#endif
-
-	/* Check if this interrupt handler is already lodged */
-	for (i = 0; (i < COMEM_MAXPCI); i++) {
-		if (pci_irqlist[i].handler == handler)
-			return(0);
-	}
-
-	/* Find a free spot to put this handler */
-	for (i = 0; (i < COMEM_MAXPCI); i++) {
-		if (pci_irqlist[i].handler == 0) {
-			pci_irqlist[i].handler = handler;
-			pci_irqlist[i].device = device;
-			pci_irqlist[i].dev_id = dev_id;
-			return(0);
-		}
-	}
-
-	/* Couldn't fit?? */
-	return(1);
-}
-
-/*****************************************************************************/
-
-void pci_free_irq(unsigned int irq, void *dev_id)
-{
-	int	i;
-
-#ifdef DEBUGIO
-	printk(KERN_DEBUG "pci_free_irq(irq=%d,dev_id=%x)\n", irq, (int) dev_id);
-#endif
-
-	if (dev_id == (void *) NULL)
-		return;
-
-	/* Check if this interrupt handler is lodged */
-	for (i = 0; (i < COMEM_MAXPCI); i++) {
-		if (pci_irqlist[i].dev_id == dev_id) {
-			pci_irqlist[i].handler = NULL;
-			pci_irqlist[i].device = NULL;
-			pci_irqlist[i].dev_id = NULL;
-			break;
-		}
-	}
-}
-
-/*****************************************************************************/
-
-void pci_interrupt(int irq, void *id, struct pt_regs *fp)
-{
-	int	i;
-
-#ifdef DEBUGIO
-	printk(KERN_DEBUG "pci_interrupt(irq=%d,id=%x,fp=%x)\n", irq, (int) id, (int) fp);
-#endif
-
-	for (i = 0; (i < COMEM_MAXPCI); i++) {
-		if (pci_irqlist[i].handler)
-			(*pci_irqlist[i].handler)(irq,pci_irqlist[i].dev_id,fp);
-	}
-}
-
-/*****************************************************************************/
-
-/*
- *	The shared memory region is broken up into contiguous 512 byte
- *	regions for easy allocation... This is not an optimal solution
- *	but it makes allocation and freeing regions really easy.
- */
-
-#define	PCI_MEMSLOTSIZE		512
-#define	PCI_MEMSLOTS		(COMEM_SHMEMSIZE / PCI_MEMSLOTSIZE)
-
-char	pci_shmemmap[PCI_MEMSLOTS];
-
-
-void *pci_bmalloc(int size)
-{
-	int	i, j, nrslots;
-
-#ifdef DEBUGIO
-	printk(KERN_DEBUG "pci_bmalloc(size=%d)\n", size);
-#endif
-
-	if (size <= 0)
-		return((void *) NULL);
-
-	nrslots = (size - 1) / PCI_MEMSLOTSIZE;
-
-	for (i = 0; (i < (PCI_MEMSLOTS-nrslots)); i++) {
-		if (pci_shmemmap[i] == 0) {
-			for (j = i+1; (j < (i+nrslots)); j++) {
-				if (pci_shmemmap[j])
-					goto restart;
-			}
-
-			for (j = i; (j <= i+nrslots); j++)
-				pci_shmemmap[j] = 1;
-			break;
-		}
-restart:
-	}
-
-	return((void *) (COMEM_BASE + COMEM_SHMEM + (i * PCI_MEMSLOTSIZE)));
-}
-
-/*****************************************************************************/
-
-void pci_bmfree(void *mp, int size)
-{
-	int	i, j, nrslots;
-
-#ifdef DEBUGIO
-	printk(KERN_DEBUG "pci_bmfree(mp=%x,size=%d)\n", (int) mp, size);
-#endif
-
-	nrslots = size / PCI_MEMSLOTSIZE;
-	i = (((unsigned long) mp) - (COMEM_BASE + COMEM_SHMEM)) /
-		PCI_MEMSLOTSIZE;
-
-	for (j = i; (j < (i+nrslots)); j++)
-		pci_shmemmap[j] = 0;
-}
-
-/*****************************************************************************/
-
-unsigned long pci_virt_to_bus(volatile void *address)
-{
-	unsigned long	l;
-
-#ifdef DEBUGIO
-	printk(KERN_DEBUG "pci_virt_to_bus(address=%x)", (int) address);
-#endif
-
-	l = ((unsigned long) address) - COMEM_BASE;
-#ifdef DEBUGIO
-	printk(KERN_DEBUG "=%x\n", (int) (l+pci_shmemaddr));
-#endif
-	return(l + pci_shmemaddr);
-}
-
-/*****************************************************************************/
-
-void *pci_bus_to_virt(unsigned long address)
-{
-	unsigned long	l;
-
-#ifdef DEBUGIO
-	printk(KERN_DEBUG "pci_bus_to_virt(address=%x)", (int) address);
-#endif
-
-	l = address - pci_shmemaddr;
-#ifdef DEBUGIO
-	printk(KERN_DEBUG "=%x\n", (int) (address + COMEM_BASE));
-#endif
-	return((void *) (address + COMEM_BASE));
-}
-
-/*****************************************************************************/
-
-void pci_bmcpyto(void *dst, void *src, int len)
-{
-	unsigned long	*dp, *sp, val;
-	unsigned char	*dcp, *scp;
-	int		i, j;
-
-#ifdef DEBUGIO
-	printk(KERN_DEBUG "pci_bmcpyto(dst=%x,src=%x,len=%d)\n", (int)dst, (int)src, len);
-#endif
-
-	dp = (unsigned long *) dst;
-	sp = (unsigned long *) src;
-	i = len >> 2;
-
-#if 0
-	printk(KERN_INFO "DATA:");
-	scp = (unsigned char *) sp;
-	for (i = 0; (i < len); i++) {
-		if ((i % 16) == 0) printk(KERN_INFO "\n%04x: ", i);
-		printk(KERN_INFO "%02x ", *scp++);
-	}
-	printk(KERN_INFO "\n");
-#endif
-
-	for (j = 0; (i >= 0); i--, j++) {
-		val = *sp++;
-		val = (val << 24) | ((val & 0x0000ff00) << 8) |
-			((val & 0x00ff0000) >> 8) | (val >> 24);
-		*dp++ = val;
-	}
-
-	if (len & 0x3) {
-		dcp = (unsigned char *) dp;
-		scp = ((unsigned char *) sp) + 3;
-		for (i = 0; (i < (len & 0x3)); i++)
-			*dcp++ = *scp--;
-	}
-}
-
-/*****************************************************************************/
-
-void pci_bmcpyfrom(void *dst, void *src, int len)
-{
-	unsigned long	*dp, *sp, val;
-	unsigned char	*dcp, *scp;
-	int		i;
-
-#ifdef DEBUGIO
-	printk(KERN_DEBUG "pci_bmcpyfrom(dst=%x,src=%x,len=%d)\n",(int)dst,(int)src,len);
-#endif
-
-	dp = (unsigned long *) dst;
-	sp = (unsigned long *) src;
-	i = len >> 2;
-
-	for (; (i >= 0); i--) {
-		val = *sp++;
-		val = (val << 24) | ((val & 0x0000ff00) << 8) |
-			((val & 0x00ff0000) >> 8) | (val >> 24);
-		*dp++ = val;
-	}
-
-	if (len & 0x3) {
-		dcp = ((unsigned char *) dp) + 3;
-		scp = (unsigned char *) sp;
-		for (i = 0; (i < (len & 0x3)); i++)
-			*dcp++ = *scp--;
-	}
-
-#if 0
-	printk(KERN_INFO "DATA:");
-	dcp = (unsigned char *) dst;
-	for (i = 0; (i < len); i++) {
-		if ((i % 16) == 0) printk(KERN_INFO "\n%04x: ", i);
-		printk(KERN_INFO "%02x ", *dcp++);
-	}
-	printk(KERN_INFO "\n");
-#endif
-}
-
-/*****************************************************************************/
-
-void *pci_alloc_consistent(struct pci_dev *dev, size_t size, dma_addr_t *dma_addr)
-{
-	void *mp;
-	if ((mp = pci_bmalloc(size)) != NULL) {
-		dma_addr = mp - (COMEM_BASE + COMEM_SHMEM);
-		return(mp);
-	}
-	*dma_addr = (dma_addr_t) NULL;
-	return(NULL);
-}
-
-/*****************************************************************************/
-
-void pci_free_consistent(struct pci_dev *dev, size_t size, void *cpu_addr, dma_addr_t dma_addr)
-{
-	pci_bmfree(cpu_addr, size);
-}
-
-/*****************************************************************************/
diff --git a/arch/m68knommu/kernel/signal.c b/arch/m68knommu/kernel/signal.c
index bbfcae9..5ab6a04 100644
--- a/arch/m68knommu/kernel/signal.c
+++ b/arch/m68knommu/kernel/signal.c
@@ -279,6 +279,9 @@
 	struct sigcontext context;
 	int err = 0;
 
+	/* Always make any pending restarted system calls return -EINTR */
+	current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
 	/* get previous context */
 	if (copy_from_user(&context, usc, sizeof(context)))
 		goto badframe;
@@ -316,6 +319,9 @@
 	unsigned long usp;
 	int err;
 
+	/* Always make any pending restarted system calls return -EINTR */
+	current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
 	err = __get_user(temp, &uc->uc_mcontext.version);
 	if (temp != MCONTEXT_VERSION)
 		goto badframe;
@@ -692,6 +698,15 @@
 		regs->d0 = -EINTR;
 		break;
 
+	case -ERESTART_RESTARTBLOCK:
+		if (!has_handler) {
+			regs->d0 = __NR_restart_syscall;
+			regs->pc -= 2;
+			break;
+		}
+		regs->d0 = -EINTR;
+		break;
+
 	case -ERESTARTSYS:
 		if (has_handler && !(ka->sa.sa_flags & SA_RESTART)) {
 			regs->d0 = -EINTR;
diff --git a/arch/m68knommu/kernel/syscalltable.S b/arch/m68knommu/kernel/syscalltable.S
index 812f8d8..1017e76 100644
--- a/arch/m68knommu/kernel/syscalltable.S
+++ b/arch/m68knommu/kernel/syscalltable.S
@@ -18,7 +18,7 @@
 .text
 ALIGN
 ENTRY(sys_call_table)
-	.long sys_ni_syscall	/* 0  -  old "setup()" system call*/
+	.long sys_restart_syscall	/* 0  -  old "setup()" system call */
 	.long sys_exit
 	.long sys_fork
 	.long sys_read
@@ -107,7 +107,7 @@
 	.long sys_uselib
 	.long sys_ni_syscall	/* sys_swapon */
 	.long sys_reboot
-	.long old_readdir
+	.long sys_old_readdir
 	.long old_mmap		/* 90 */
 	.long sys_munmap
 	.long sys_truncate
diff --git a/arch/m68knommu/platform/5307/config.c b/arch/m68knommu/platform/5307/config.c
index 11cff66..724faf0 100644
--- a/arch/m68knommu/platform/5307/config.c
+++ b/arch/m68knommu/platform/5307/config.c
@@ -123,7 +123,7 @@
 {
 	mcf_setimr(MCFSIM_IMR_MASKALL);
 
-#if defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \
+#if defined(CONFIG_NETtel) || \
     defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
 	/* Copy command line from FLASH to local buffer... */
 	memcpy(commandp, (char *) 0xf0004000, size);
diff --git a/arch/m68knommu/platform/532x/config.c b/arch/m68knommu/platform/532x/config.c
index 4f44b63..a347623 100644
--- a/arch/m68knommu/platform/532x/config.c
+++ b/arch/m68knommu/platform/532x/config.c
@@ -41,15 +41,15 @@
 
 static struct mcf_platform_uart m532x_uart_platform[] = {
 	{
-		.mapbase	= MCF_MBAR + MCFUART_BASE1,
+		.mapbase	= MCFUART_BASE1,
 		.irq		= MCFINT_VECBASE + MCFINT_UART0,
 	},
 	{
-		.mapbase 	= MCF_MBAR + MCFUART_BASE2,
+		.mapbase 	= MCFUART_BASE2,
 		.irq		= MCFINT_VECBASE + MCFINT_UART1,
 	},
 	{
-		.mapbase 	= MCF_MBAR + MCFUART_BASE3,
+		.mapbase 	= MCFUART_BASE3,
 		.irq		= MCFINT_VECBASE + MCFINT_UART2,
 	},
 	{ },
@@ -108,7 +108,7 @@
 		default: irq = 32; icr = MCFSIM_ICR_TIMER1; break;
 		}
 		
-		icrp = (volatile unsigned char *) (MCF_MBAR + icr);
+		icrp = (volatile unsigned char *) (icr);
 		*icrp = level;
 		mcf_enable_irq0(irq);
 	}
diff --git a/arch/m68knommu/platform/coldfire/entry.S b/arch/m68knommu/platform/coldfire/entry.S
index 1e3c0dc..3b471c0 100644
--- a/arch/m68knommu/platform/coldfire/entry.S
+++ b/arch/m68knommu/platform/coldfire/entry.S
@@ -215,19 +215,8 @@
 	RESTORE_LOCAL
 
 ENTRY(ret_from_interrupt)
-	moveb	%sp@(PT_SR),%d0
-	andl	#0x7,%d0
-	jeq	1f
-
-	RESTORE_ALL
-
-1:
-	/* check if we need to do software interrupts */
-	movel	irq_stat+CPUSTAT_SOFTIRQ_PENDING,%d0
-	jeq	ret_from_exception
-
-	pea	ret_from_exception
-	jmp	do_softirq
+	/* the fasthandler is confusing me, haven't seen any user */
+	jmp	ret_from_exception
 
 /*
  * Beware - when entering resume, prev (the current task) is
diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
index a3bbbf0..783da85 100644
--- a/arch/mips/configs/bigsur_defconfig
+++ b/arch/mips/configs/bigsur_defconfig
@@ -959,7 +959,7 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_SENSORS_EEPROM=y
+CONFIG_EEPROM_LEGACY=y
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
 CONFIG_SENSORS_PCF8591=y
diff --git a/arch/mips/configs/emma2rh_defconfig b/arch/mips/configs/emma2rh_defconfig
index 634bb4e..fea9bc9 100644
--- a/arch/mips/configs/emma2rh_defconfig
+++ b/arch/mips/configs/emma2rh_defconfig
@@ -996,7 +996,7 @@
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/mips/configs/fulong_defconfig b/arch/mips/configs/fulong_defconfig
index b6698a2..786a9bc 100644
--- a/arch/mips/configs/fulong_defconfig
+++ b/arch/mips/configs/fulong_defconfig
@@ -1006,8 +1006,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig
index dd13db4..84d6491 100644
--- a/arch/mips/configs/msp71xx_defconfig
+++ b/arch/mips/configs/msp71xx_defconfig
@@ -929,7 +929,7 @@
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 CONFIG_PMCTWILED=y
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index db92726..8426d3b 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -1845,7 +1845,7 @@
 CONFIG_SENSORS_DS1337=m
 CONFIG_SENSORS_DS1374=m
 # CONFIG_DS1682 is not set
-CONFIG_SENSORS_EEPROM=m
+CONFIG_EEPROM_LEGACY=m
 CONFIG_SENSORS_PCF8574=m
 CONFIG_SENSORS_PCA9539=m
 CONFIG_SENSORS_PCF8591=m
@@ -1872,7 +1872,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_W1=m
diff --git a/arch/mips/configs/pnx8335-stb225_defconfig b/arch/mips/configs/pnx8335-stb225_defconfig
index d953652..2728caa 100644
--- a/arch/mips/configs/pnx8335-stb225_defconfig
+++ b/arch/mips/configs/pnx8335-stb225_defconfig
@@ -640,8 +640,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig
index c7c0864..83d5c58 100644
--- a/arch/mips/configs/rbtx49xx_defconfig
+++ b/arch/mips/configs/rbtx49xx_defconfig
@@ -522,7 +522,7 @@
 #
 # SPI Protocol Masters
 #
-CONFIG_SPI_AT25=y
+CONFIG_EEPROM_AT25=y
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_HAVE_GPIO_LIB=y
 
diff --git a/arch/mips/include/asm/Kbuild b/arch/mips/include/asm/Kbuild
index 023866c..7897f05 100644
--- a/arch/mips/include/asm/Kbuild
+++ b/arch/mips/include/asm/Kbuild
@@ -1,4 +1,3 @@
 include include/asm-generic/Kbuild.asm
 
 header-y += cachectl.h sgidefs.h sysmips.h
-header-y += swab.h
diff --git a/arch/mips/include/asm/byteorder.h b/arch/mips/include/asm/byteorder.h
index 607b718..9579051 100644
--- a/arch/mips/include/asm/byteorder.h
+++ b/arch/mips/include/asm/byteorder.h
@@ -8,8 +8,6 @@
 #ifndef _ASM_BYTEORDER_H
 #define _ASM_BYTEORDER_H
 
-#include <asm/swab.h>
-
 #if defined(__MIPSEB__)
 #include <linux/byteorder/big_endian.h>
 #elif defined(__MIPSEL__)
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index d0916a5..51d1ba4 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -398,7 +398,7 @@
 	sys	sys_uselib		1
 	sys	sys_swapon		2
 	sys	sys_reboot		3
-	sys	old_readdir		3
+	sys	sys_old_readdir		3
 	sys	old_mmap		6	/* 4090 */
 	sys	sys_munmap		2
 	sys	sys_truncate		2
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
index 62fba8a..ceeaaaa 100644
--- a/arch/mn10300/kernel/entry.S
+++ b/arch/mn10300/kernel/entry.S
@@ -478,7 +478,7 @@
 	.long sys_uselib
 	.long sys_swapon
 	.long sys_reboot
-	.long old_readdir
+	.long sys_old_readdir
 	.long old_mmap		/* 90 */
 	.long sys_munmap
 	.long sys_truncate
diff --git a/arch/parisc/include/asm/Kbuild b/arch/parisc/include/asm/Kbuild
index 2121d99..f88b252 100644
--- a/arch/parisc/include/asm/Kbuild
+++ b/arch/parisc/include/asm/Kbuild
@@ -1,4 +1,3 @@
 include include/asm-generic/Kbuild.asm
 
 unifdef-y += pdc.h
-unifdef-y += swab.h
diff --git a/arch/parisc/include/asm/byteorder.h b/arch/parisc/include/asm/byteorder.h
index da66029..58af2c5 100644
--- a/arch/parisc/include/asm/byteorder.h
+++ b/arch/parisc/include/asm/byteorder.h
@@ -1,7 +1,6 @@
 #ifndef _PARISC_BYTEORDER_H
 #define _PARISC_BYTEORDER_H
 
-#include <asm/swab.h>
 #include <linux/byteorder/big_endian.h>
 
 #endif /* _PARISC_BYTEORDER_H */
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 84b8613..74cc312 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -123,6 +123,7 @@
 	select HAVE_DMA_ATTRS if PPC64
 	select USE_GENERIC_SMP_HELPERS if SMP
 	select HAVE_OPROFILE
+	select HAVE_SYSCALL_WRAPPERS if PPC64
 
 config EARLY_PRINTK
 	bool
@@ -875,10 +876,6 @@
 
 source "fs/Kconfig"
 
-# XXX source "arch/ppc/8xx_io/Kconfig"
-
-# XXX source "arch/ppc/8260_io/Kconfig"
-
 source "arch/powerpc/sysdev/qe_lib/Kconfig"
 
 source "lib/Kconfig"
diff --git a/arch/powerpc/boot/cuboot-warp.c b/arch/powerpc/boot/cuboot-warp.c
index 2178021..806df69 100644
--- a/arch/powerpc/boot/cuboot-warp.c
+++ b/arch/powerpc/boot/cuboot-warp.c
@@ -18,57 +18,14 @@
 
 static bd_t bd;
 
-static void warp_fixup_one_nor(u32 from, u32 to)
-{
-	void *devp;
-	char name[50];
-	u32 v[2];
-
-	sprintf(name, "/plb/opb/ebc/nor_flash@0,0/partition@%x", from);
-
-	devp = finddevice(name);
-	if (!devp)
-		return;
-
-	if (getprop(devp, "reg", v, sizeof(v)) == sizeof(v)) {
-		v[0] = to;
-		setprop(devp, "reg", v, sizeof(v));
-
-		printf("NOR 64M fixup %x -> %x\r\n", from, to);
-	}
-}
-
-
 static void warp_fixups(void)
 {
 	ibm440ep_fixup_clocks(66000000, 11059200, 50000000);
 	ibm4xx_sdram_fixup_memsize();
 	ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
 	dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
-
-	/* Fixup for 64M flash on Rev A boards. */
-	if (bd.bi_flashsize == 0x4000000) {
-		void *devp;
-		u32 v[3];
-
-		devp = finddevice("/plb/opb/ebc/nor_flash@0,0");
-		if (!devp)
-			return;
-
-		/* Fixup the size */
-		if (getprop(devp, "reg", v, sizeof(v)) == sizeof(v)) {
-			v[2] = bd.bi_flashsize;
-			setprop(devp, "reg", v, sizeof(v));
-		}
-
-		/* Fixup parition offsets */
-		warp_fixup_one_nor(0x300000, 0x3f00000);
-		warp_fixup_one_nor(0x340000, 0x3f40000);
-		warp_fixup_one_nor(0x380000, 0x3f80000);
-	}
 }
 
-
 void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 		   unsigned long r6, unsigned long r7)
 {
diff --git a/arch/powerpc/boot/dts/haleakala.dts b/arch/powerpc/boot/dts/haleakala.dts
index 513bc43..5b2a494 100644
--- a/arch/powerpc/boot/dts/haleakala.dts
+++ b/arch/powerpc/boot/dts/haleakala.dts
@@ -89,8 +89,11 @@
 		clock-frequency = <0>; /* Filled in by U-Boot */
 
 		SDRAM0: memory-controller {
-			compatible = "ibm,sdram-405exr";
+			compatible = "ibm,sdram-405exr", "ibm,sdram-4xx-ddr2";
 			dcr-reg = <0x010 0x002>;
+			interrupt-parent = <&UIC2>;
+			interrupts = <0x5 0x4	/* ECC DED Error */ 
+				      0x6 0x4>;	/* ECC SEC Error */ 
 		};
 
 		MAL0: mcmal {
diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts
index dececc4..2804444 100644
--- a/arch/powerpc/boot/dts/kilauea.dts
+++ b/arch/powerpc/boot/dts/kilauea.dts
@@ -90,8 +90,11 @@
 		clock-frequency = <0>; /* Filled in by U-Boot */
 
 		SDRAM0: memory-controller {
-			compatible = "ibm,sdram-405ex";
+			compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2";
 			dcr-reg = <0x010 0x002>;
+			interrupt-parent = <&UIC2>;
+			interrupts = <0x5 0x4	/* ECC DED Error */ 
+				      0x6 0x4>;	/* ECC SEC Error */ 
 		};
 
 		MAL0: mcmal {
diff --git a/arch/powerpc/boot/dts/makalu.dts b/arch/powerpc/boot/dts/makalu.dts
index 945508c..ffc246e7 100644
--- a/arch/powerpc/boot/dts/makalu.dts
+++ b/arch/powerpc/boot/dts/makalu.dts
@@ -90,8 +90,11 @@
 		clock-frequency = <0>; /* Filled in by U-Boot */
 
 		SDRAM0: memory-controller {
-			compatible = "ibm,sdram-405ex";
+			compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2";
 			dcr-reg = <0x010 0x002>;
+			interrupt-parent = <&UIC2>;
+			interrupts = <0x5 0x4 /* ECC DED Error */
+			              0x6 0x4 /* ECC SEC Error */ >;
 		};
 
 		MAL0: mcmal {
diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts
index d4df8b6..909a89c 100644
--- a/arch/powerpc/boot/dts/mpc8313erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8313erdb.dts
@@ -185,7 +185,7 @@
 			cell-index = <0>;
 			device_type = "network";
 			model = "eTSEC";
-			compatible = "gianfar", "simple-bus";
+			compatible = "gianfar";
 			reg = <0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <37 0x8 36 0x8 35 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts
index 072c9b0..7178416 100644
--- a/arch/powerpc/boot/dts/mpc8315erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8315erdb.dts
@@ -255,7 +255,7 @@
 			device_type = "serial";
 			compatible = "ns16550";
 			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
+			clock-frequency = <133333333>;
 			interrupts = <9 0x8>;
 			interrupt-parent = <&ipic>;
 		};
@@ -265,7 +265,7 @@
 			device_type = "serial";
 			compatible = "ns16550";
 			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
+			clock-frequency = <133333333>;
 			interrupts = <10 0x8>;
 			interrupt-parent = <&ipic>;
 		};
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
index b9da421..0668d10 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -313,7 +313,7 @@
 			  0x1000000 0x0 0x0 0xe1010000 0x0 0x10000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
-		interrupts = <26 2>;
+		interrupts = <25 2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
@@ -350,7 +350,7 @@
 			  0x1000000 0x0 0x0 0xe1020000 0x0 0x10000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
-		interrupts = <25 2>;
+		interrupts = <26 2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
index 21459e1..359c3b7 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds.dts
@@ -89,7 +89,7 @@
 
 			ramdisk@0 {
 				reg = <0x0 0x03000000>;
-				readl-only;
+				read-only;
 			};
 
 			diagnostic@3000000 {
@@ -724,7 +724,7 @@
 			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x00010000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
-		interrupts = <26 2>;
+		interrupts = <25 2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
@@ -761,7 +761,7 @@
 			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x00010000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
-		interrupts = <27 2>;
+		interrupts = <26 2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
index c114c4e..fd462ef 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
@@ -457,7 +457,7 @@
 			  0x1000000 0x0 0x0 0xffc10000 0x0 0x10000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
-		interrupts = <26 2>;
+		interrupts = <25 2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
index 04ecda1..e35230f 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
@@ -208,7 +208,7 @@
 			  0x1000000 0x0 0x0 0xffc20000 0x0 0x10000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
-		interrupts = <27 2>;
+		interrupts = <26 2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts
index f4e4ba6..7e183ff 100644
--- a/arch/powerpc/boot/dts/warp.dts
+++ b/arch/powerpc/boot/dts/warp.dts
@@ -149,12 +149,17 @@
 					reg = <0x00000002 0x00004000 0x00000A00>;
 				};
 
-				nor_flash@0,0 {
+				nor@0,0 {
 					compatible = "amd,s29gl032a", "cfi-flash";
 					bank-width = <2>;
 					reg = <0x00000000 0x00000000 0x00400000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
+
+					partition@0 {
+						label = "splash";
+						reg = <0x00000000 0x00020000>;
+					};
 					partition@300000 {
 						label = "fpga";
 						reg = <0x0300000 0x00040000>;
@@ -168,6 +173,41 @@
 						reg = <0x0380000 0x00080000>;
 					};
 				};
+
+				ndfc@1,0 {
+					compatible = "ibm,ndfc";
+					reg = <0x00000001 0x00000000 0x00002000>;
+					ccr = <0x00001000>;
+					bank-settings = <0x80002222>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					nand {
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "kernel";
+							reg = <0x00000000 0x00200000>;
+						};
+						partition@200000 {
+							label = "root";
+							reg = <0x00200000 0x03E00000>;
+						};
+						partition@40000000 {
+							label = "persistent";
+							reg = <0x04000000 0x04000000>;
+						};
+						partition@80000000 {
+							label = "persistent1";
+							reg = <0x08000000 0x04000000>;
+						};
+						partition@C0000000 {
+							label = "persistent2";
+							reg = <0x0C000000 0x04000000>;
+						};
+					};
+				};
 			};
 
 			UART0: serial@ef600300 {
diff --git a/arch/powerpc/configs/40x/acadia_defconfig b/arch/powerpc/configs/40x/acadia_defconfig
index 25572cc..a32ec8d 100644
--- a/arch/powerpc/configs/40x/acadia_defconfig
+++ b/arch/powerpc/configs/40x/acadia_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 08:49:18 2008
+# Linux kernel version: 2.6.29-rc2
+# Tue Jan 20 08:17:46 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_4xx=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -40,7 +41,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -71,12 +72,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -89,6 +90,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -111,7 +113,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -122,7 +123,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -130,11 +130,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -151,6 +149,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
@@ -182,6 +184,7 @@
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -205,6 +208,7 @@
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -219,12 +223,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -248,6 +254,7 @@
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -272,6 +279,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -322,6 +330,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -334,6 +343,7 @@
 # CONFIG_AF_RXRPC is not set
 # CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -359,6 +369,7 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -431,6 +442,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -524,6 +541,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -576,9 +597,12 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -597,11 +621,11 @@
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -611,7 +635,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -670,7 +694,9 @@
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -704,10 +730,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -717,6 +740,7 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -757,6 +781,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -807,6 +832,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -815,18 +841,24 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -853,11 +885,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/40x/ep405_defconfig b/arch/powerpc/configs/40x/ep405_defconfig
index b80ba7a..4e9d85f 100644
--- a/arch/powerpc/configs/40x/ep405_defconfig
+++ b/arch/powerpc/configs/40x/ep405_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 08:49:20 2008
+# Linux kernel version: 2.6.29-rc2
+# Tue Jan 20 08:17:48 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_4xx=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -40,7 +41,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -71,12 +72,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -89,6 +90,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -111,7 +113,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -122,7 +123,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -130,11 +130,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -151,6 +149,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
@@ -184,6 +186,7 @@
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -207,6 +210,7 @@
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -221,12 +225,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -250,6 +256,7 @@
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -274,6 +281,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -324,6 +332,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -336,6 +345,7 @@
 # CONFIG_AF_RXRPC is not set
 # CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -361,6 +371,7 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -433,6 +444,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -464,6 +481,7 @@
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -546,6 +564,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -570,6 +589,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -629,9 +652,12 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -650,11 +676,11 @@
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -664,7 +690,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -723,6 +749,7 @@
 #
 # CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -748,11 +775,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -791,6 +818,10 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -816,7 +847,9 @@
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -850,10 +883,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -863,6 +893,7 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -903,6 +934,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -953,6 +985,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -961,18 +994,24 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -999,11 +1038,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/40x/hcu4_defconfig b/arch/powerpc/configs/40x/hcu4_defconfig
index 45dcb82..8c019d7 100644
--- a/arch/powerpc/configs/40x/hcu4_defconfig
+++ b/arch/powerpc/configs/40x/hcu4_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 08:49:22 2008
+# Linux kernel version: 2.6.29-rc2
+# Tue Jan 20 08:17:50 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_4xx=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -40,7 +41,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -71,12 +72,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -89,6 +90,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -111,7 +113,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -122,7 +123,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -130,11 +130,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -151,6 +149,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
@@ -182,6 +184,7 @@
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -205,6 +208,7 @@
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -219,12 +223,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -248,6 +254,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -272,6 +279,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -322,6 +330,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -334,6 +343,7 @@
 # CONFIG_AF_RXRPC is not set
 # CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -359,6 +369,7 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -431,6 +442,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -461,6 +478,7 @@
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -543,6 +561,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -565,6 +584,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -617,9 +640,12 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -639,11 +665,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -653,7 +679,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -712,7 +738,9 @@
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -746,10 +774,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -759,6 +784,7 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -799,6 +825,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -849,6 +876,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -857,18 +885,24 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -895,11 +929,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/40x/kilauea_defconfig b/arch/powerpc/configs/40x/kilauea_defconfig
index e2f3695..9917a09 100644
--- a/arch/powerpc/configs/40x/kilauea_defconfig
+++ b/arch/powerpc/configs/40x/kilauea_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 08:49:23 2008
+# Linux kernel version: 2.6.29-rc2
+# Tue Jan 20 08:17:52 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_4xx=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -40,7 +41,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -71,12 +72,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -89,6 +90,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -111,7 +113,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -122,7 +123,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -130,11 +130,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -151,6 +149,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
@@ -182,6 +184,7 @@
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -205,6 +208,7 @@
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -219,12 +223,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -248,6 +254,7 @@
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -272,6 +279,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -322,6 +330,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -334,6 +343,7 @@
 # CONFIG_AF_RXRPC is not set
 # CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -359,6 +369,7 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -431,6 +442,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -524,6 +541,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -576,9 +597,12 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -597,11 +621,11 @@
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -611,7 +635,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -670,7 +694,9 @@
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -704,10 +730,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -717,6 +740,7 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -757,6 +781,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -807,6 +832,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -815,18 +841,24 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -853,11 +885,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/40x/makalu_defconfig b/arch/powerpc/configs/40x/makalu_defconfig
index 413c778..58bf2ac 100644
--- a/arch/powerpc/configs/40x/makalu_defconfig
+++ b/arch/powerpc/configs/40x/makalu_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 08:49:25 2008
+# Linux kernel version: 2.6.29-rc2
+# Tue Jan 20 08:17:53 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_4xx=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -40,7 +41,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -71,12 +72,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -89,6 +90,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -111,7 +113,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -122,7 +123,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -130,11 +130,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -151,6 +149,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
@@ -182,6 +184,7 @@
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -205,6 +208,7 @@
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -219,12 +223,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -248,6 +254,7 @@
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -272,6 +279,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -322,6 +330,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -334,6 +343,7 @@
 # CONFIG_AF_RXRPC is not set
 # CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -359,6 +369,7 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -431,6 +442,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -524,6 +541,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -576,9 +597,12 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -597,11 +621,11 @@
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -611,7 +635,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -670,7 +694,9 @@
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -704,10 +730,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -717,6 +740,7 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -757,6 +781,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -807,6 +832,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -815,18 +841,24 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -853,11 +885,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/40x/virtex_defconfig b/arch/powerpc/configs/40x/virtex_defconfig
index 9a9350d..b6888384 100644
--- a/arch/powerpc/configs/40x/virtex_defconfig
+++ b/arch/powerpc/configs/40x/virtex_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc4
-# Fri Nov 14 10:49:16 2008
+# Linux kernel version: 2.6.29-rc2
+# Tue Jan 20 08:17:55 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_4xx=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -41,7 +42,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -74,8 +75,8 @@
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -113,7 +114,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -124,7 +124,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -132,11 +131,9 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -153,6 +150,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
@@ -188,6 +189,7 @@
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -205,13 +207,13 @@
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -226,12 +228,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -256,6 +260,7 @@
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -280,6 +285,8 @@
 #
 # Networking options
 #
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -423,6 +430,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -438,8 +446,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -574,6 +583,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -674,9 +687,12 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
 # CONFIG_NVRAM is not set
@@ -854,7 +870,6 @@
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -870,6 +885,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -906,10 +922,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -918,6 +931,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -997,6 +1011,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1046,6 +1061,7 @@
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1055,6 +1071,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1064,11 +1082,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1094,6 +1114,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/40x/walnut_defconfig b/arch/powerpc/configs/40x/walnut_defconfig
index 5820e0a..5ab29dd 100644
--- a/arch/powerpc/configs/40x/walnut_defconfig
+++ b/arch/powerpc/configs/40x/walnut_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 08:49:27 2008
+# Linux kernel version: 2.6.29-rc2
+# Tue Jan 20 08:17:57 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_4xx=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -40,7 +41,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -71,12 +72,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -89,6 +90,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -111,7 +113,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -122,7 +123,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -130,11 +130,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -151,6 +149,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
@@ -185,6 +187,7 @@
 # CONFIG_CPU_FREQ is not set
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_OF_RTC=y
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -208,6 +211,7 @@
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -222,12 +226,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -251,6 +257,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -275,6 +282,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -325,6 +333,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -337,6 +346,7 @@
 # CONFIG_AF_RXRPC is not set
 # CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -362,6 +372,7 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -434,6 +445,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -464,6 +481,7 @@
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -546,6 +564,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -568,6 +587,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -620,9 +643,12 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -641,11 +667,11 @@
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -655,7 +681,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -701,9 +727,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -729,7 +759,9 @@
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -763,10 +795,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -776,6 +805,7 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -816,6 +846,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -866,6 +897,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -874,18 +906,24 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -912,11 +950,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/44x/arches_defconfig b/arch/powerpc/configs/44x/arches_defconfig
index 082158d..1d72b0a 100644
--- a/arch/powerpc/configs/44x/arches_defconfig
+++ b/arch/powerpc/configs/44x/arches_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 09:16:04 2008
+# Linux kernel version: 2.6.29-rc2
+# Tue Jan 20 08:22:31 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -19,6 +19,7 @@
 CONFIG_BOOKE=y
 CONFIG_PTE_64BIT=y
 CONFIG_PHYS_64BIT=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -44,7 +45,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,8 +76,8 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -111,7 +112,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -122,7 +122,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -130,11 +129,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -151,6 +148,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
@@ -188,6 +189,7 @@
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -212,6 +214,7 @@
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -226,12 +229,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
 CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -255,6 +260,7 @@
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -279,6 +285,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -329,6 +336,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -341,6 +349,7 @@
 # CONFIG_AF_RXRPC is not set
 # CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -453,6 +462,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -505,9 +518,12 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -527,11 +543,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -541,7 +557,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -600,7 +616,9 @@
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -634,10 +652,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -646,6 +661,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -686,6 +702,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -736,6 +753,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -744,18 +762,24 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
diff --git a/arch/powerpc/configs/44x/bamboo_defconfig b/arch/powerpc/configs/44x/bamboo_defconfig
index f47c2f3..959bdc4 100644
--- a/arch/powerpc/configs/44x/bamboo_defconfig
+++ b/arch/powerpc/configs/44x/bamboo_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 09:16:06 2008
+# Linux kernel version: 2.6.29-rc2
+# Tue Jan 20 08:22:33 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -19,6 +19,7 @@
 CONFIG_BOOKE=y
 CONFIG_PTE_64BIT=y
 CONFIG_PHYS_64BIT=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -44,7 +45,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +76,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -115,7 +116,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -126,7 +126,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -134,11 +133,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -155,6 +152,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
@@ -193,6 +194,7 @@
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -216,6 +218,7 @@
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -230,12 +233,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
 CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -259,6 +264,7 @@
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -283,6 +289,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -333,6 +340,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -345,6 +353,7 @@
 # CONFIG_AF_RXRPC is not set
 # CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -394,6 +403,7 @@
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -476,6 +486,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -498,6 +509,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -550,9 +565,12 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -571,11 +589,11 @@
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -585,7 +603,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -631,9 +649,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -659,7 +681,9 @@
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -693,10 +717,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -705,6 +726,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -745,6 +767,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -795,6 +818,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -803,18 +827,24 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -841,11 +871,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/44x/canyonlands_defconfig b/arch/powerpc/configs/44x/canyonlands_defconfig
index 0694756..81cdcc4 100644
--- a/arch/powerpc/configs/44x/canyonlands_defconfig
+++ b/arch/powerpc/configs/44x/canyonlands_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 09:16:08 2008
+# Linux kernel version: 2.6.29-rc2
+# Tue Jan 20 08:22:35 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -19,6 +19,7 @@
 CONFIG_BOOKE=y
 CONFIG_PTE_64BIT=y
 CONFIG_PHYS_64BIT=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -44,7 +45,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,8 +76,8 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -111,7 +112,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -122,7 +122,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -130,11 +129,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -151,6 +148,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
@@ -188,6 +189,7 @@
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -212,6 +214,7 @@
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -226,12 +229,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
 CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -255,6 +260,7 @@
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -279,6 +285,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -329,6 +336,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -341,6 +349,7 @@
 # CONFIG_AF_RXRPC is not set
 # CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -453,6 +462,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -505,9 +518,12 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -527,11 +543,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -541,7 +557,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -600,7 +616,9 @@
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -634,10 +652,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -646,6 +661,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -686,6 +702,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -736,6 +753,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -744,18 +762,24 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
diff --git a/arch/powerpc/configs/44x/ebony_defconfig b/arch/powerpc/configs/44x/ebony_defconfig
index c993757..be64aa6 100644
--- a/arch/powerpc/configs/44x/ebony_defconfig
+++ b/arch/powerpc/configs/44x/ebony_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 09:16:09 2008
+# Linux kernel version: 2.6.29-rc2
+# Tue Jan 20 08:22:36 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -18,6 +18,7 @@
 CONFIG_BOOKE=y
 CONFIG_PTE_64BIT=y
 CONFIG_PHYS_64BIT=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -43,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -74,12 +75,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -92,6 +93,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -114,7 +116,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -125,7 +126,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -133,11 +133,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -154,6 +152,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
@@ -192,6 +194,7 @@
 # CONFIG_CPU_FREQ is not set
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_OF_RTC=y
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -215,6 +218,7 @@
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -229,12 +233,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
 CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -257,6 +263,7 @@
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -281,6 +288,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -331,6 +339,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -343,6 +352,7 @@
 # CONFIG_AF_RXRPC is not set
 # CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -368,6 +378,7 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
@@ -439,6 +450,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -469,6 +486,7 @@
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -551,6 +569,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -573,6 +592,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -625,9 +648,12 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -646,11 +672,11 @@
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -660,7 +686,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -706,9 +732,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -734,7 +764,9 @@
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -768,10 +800,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -791,6 +820,7 @@
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -831,6 +861,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -882,6 +913,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -890,18 +922,24 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -928,11 +966,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/44x/katmai_defconfig b/arch/powerpc/configs/44x/katmai_defconfig
index e326ee8..f67250b 100644
--- a/arch/powerpc/configs/44x/katmai_defconfig
+++ b/arch/powerpc/configs/44x/katmai_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 09:16:11 2008
+# Linux kernel version: 2.6.29-rc2
+# Tue Jan 20 08:22:38 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -18,6 +18,7 @@
 CONFIG_BOOKE=y
 CONFIG_PTE_64BIT=y
 CONFIG_PHYS_64BIT=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -43,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -74,8 +75,8 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -110,7 +111,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -121,7 +121,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -129,11 +128,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -150,6 +147,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
@@ -187,6 +188,7 @@
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -210,6 +212,7 @@
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -224,12 +227,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
 CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -253,6 +258,7 @@
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -277,6 +283,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -327,6 +334,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -339,6 +347,7 @@
 # CONFIG_AF_RXRPC is not set
 # CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -388,6 +397,7 @@
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -472,6 +482,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -494,6 +505,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -546,9 +561,12 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -568,11 +586,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -582,7 +600,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -628,9 +646,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -656,7 +678,9 @@
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -690,10 +714,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -702,6 +723,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -742,6 +764,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -792,6 +815,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -800,18 +824,24 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -837,11 +867,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/44x/rainier_defconfig b/arch/powerpc/configs/44x/rainier_defconfig
index 927f829..9348c12 100644
--- a/arch/powerpc/configs/44x/rainier_defconfig
+++ b/arch/powerpc/configs/44x/rainier_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 09:16:13 2008
+# Linux kernel version: 2.6.29-rc2
+# Tue Jan 20 08:22:41 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -18,6 +18,7 @@
 CONFIG_BOOKE=y
 CONFIG_PTE_64BIT=y
 CONFIG_PHYS_64BIT=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -43,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -74,12 +75,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -114,7 +115,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -125,7 +125,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -133,11 +132,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -154,6 +151,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
@@ -191,6 +192,7 @@
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -214,6 +216,7 @@
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -228,12 +231,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
 CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -257,6 +262,7 @@
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -281,6 +287,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -331,6 +338,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -343,6 +351,7 @@
 # CONFIG_AF_RXRPC is not set
 # CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -368,6 +377,7 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -440,6 +450,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -470,6 +486,7 @@
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -532,6 +549,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -554,6 +572,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -606,9 +628,12 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -627,11 +652,11 @@
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -641,7 +666,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -687,9 +712,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -715,7 +744,9 @@
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -749,10 +780,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -772,6 +800,7 @@
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -812,6 +841,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -863,6 +893,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -871,18 +902,24 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -922,11 +959,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/44x/sam440ep_defconfig b/arch/powerpc/configs/44x/sam440ep_defconfig
index 15f48e0..70d5c3f 100644
--- a/arch/powerpc/configs/44x/sam440ep_defconfig
+++ b/arch/powerpc/configs/44x/sam440ep_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 09:16:15 2008
+# Linux kernel version: 2.6.29-rc2
+# Tue Jan 20 08:22:42 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -19,6 +19,7 @@
 CONFIG_BOOKE=y
 CONFIG_PTE_64BIT=y
 CONFIG_PHYS_64BIT=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -44,7 +45,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -76,12 +77,12 @@
 CONFIG_IKCONFIG=y
 # CONFIG_IKCONFIG_PROC is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -115,7 +116,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -126,7 +126,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -134,11 +133,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -155,6 +152,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
@@ -193,6 +194,7 @@
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -216,6 +218,7 @@
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -230,12 +233,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
 CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -258,6 +263,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -282,6 +288,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -332,6 +339,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -344,6 +352,7 @@
 # CONFIG_AF_RXRPC is not set
 # CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -551,6 +560,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -605,6 +618,7 @@
 CONFIG_MOUSE_PS2_SYNAPTICS=y
 CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
@@ -661,9 +675,12 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -730,8 +747,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -751,11 +768,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -764,9 +781,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -848,12 +869,13 @@
 # CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 # CONFIG_LCD_ILI9320 is not set
 # CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_GENERIC=y
 
 #
 # Display device support
@@ -894,11 +916,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -906,12 +926,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -943,6 +966,7 @@
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -968,18 +992,17 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1027,6 +1050,10 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1065,6 +1092,7 @@
 CONFIG_RTC_DRV_M41T80_WDT=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1117,6 +1145,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1156,10 +1185,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
 # CONFIG_HFS_FS is not set
@@ -1168,6 +1194,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1245,6 +1272,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1278,12 +1306,17 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
diff --git a/arch/powerpc/configs/44x/sequoia_defconfig b/arch/powerpc/configs/44x/sequoia_defconfig
index 562beea..a921fe3 100644
--- a/arch/powerpc/configs/44x/sequoia_defconfig
+++ b/arch/powerpc/configs/44x/sequoia_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 09:16:16 2008
+# Linux kernel version: 2.6.29-rc2
+# Tue Jan 20 08:22:45 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -19,6 +19,7 @@
 CONFIG_BOOKE=y
 CONFIG_PTE_64BIT=y
 CONFIG_PHYS_64BIT=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -44,7 +45,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +76,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -115,7 +116,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -126,7 +126,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -134,11 +133,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -155,6 +152,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
@@ -192,6 +193,7 @@
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -216,6 +218,7 @@
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -230,12 +233,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
 CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -259,6 +264,7 @@
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -283,6 +289,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -333,6 +340,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -345,6 +353,7 @@
 # CONFIG_AF_RXRPC is not set
 # CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -370,6 +379,7 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -442,6 +452,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -472,6 +488,7 @@
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -554,6 +571,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -576,6 +594,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -628,9 +650,12 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -649,11 +674,11 @@
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -663,7 +688,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -709,9 +734,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -737,7 +766,9 @@
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -771,10 +802,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -794,6 +822,7 @@
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -834,6 +863,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -885,6 +915,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -893,18 +924,24 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -944,11 +981,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/44x/taishan_defconfig b/arch/powerpc/configs/44x/taishan_defconfig
index 427bb6a..8267008 100644
--- a/arch/powerpc/configs/44x/taishan_defconfig
+++ b/arch/powerpc/configs/44x/taishan_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 09:16:18 2008
+# Linux kernel version: 2.6.29-rc2
+# Tue Jan 20 08:22:47 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -18,6 +18,7 @@
 CONFIG_BOOKE=y
 CONFIG_PTE_64BIT=y
 CONFIG_PHYS_64BIT=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -43,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -74,12 +75,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -114,7 +115,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -125,7 +125,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -133,11 +132,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -154,6 +151,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
@@ -191,6 +192,7 @@
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -214,6 +216,7 @@
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -228,12 +231,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
 CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -257,6 +262,7 @@
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -281,6 +287,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -331,6 +338,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -343,6 +351,7 @@
 # CONFIG_AF_RXRPC is not set
 # CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -368,6 +377,7 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_OF_PARTS is not set
@@ -440,6 +450,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -470,6 +486,7 @@
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -554,6 +571,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -576,6 +594,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -628,9 +650,12 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -649,11 +674,11 @@
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -663,7 +688,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -709,9 +734,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -737,7 +766,9 @@
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -771,10 +802,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -784,6 +812,7 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -824,6 +853,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -874,6 +904,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -882,18 +913,24 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -920,11 +957,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/44x/virtex5_defconfig b/arch/powerpc/configs/44x/virtex5_defconfig
index 7513d36..15aab1c 100644
--- a/arch/powerpc/configs/44x/virtex5_defconfig
+++ b/arch/powerpc/configs/44x/virtex5_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc4
-# Fri Nov 14 10:31:16 2008
+# Linux kernel version: 2.6.29-rc2
+# Tue Jan 20 08:22:49 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -18,6 +18,7 @@
 CONFIG_BOOKE=y
 CONFIG_PTE_64BIT=y
 CONFIG_PHYS_64BIT=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -44,7 +45,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -77,8 +78,8 @@
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -116,7 +117,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -127,7 +127,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -135,11 +134,9 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -156,6 +153,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 # CONFIG_PPC4xx_PCI_EXPRESS is not set
 
@@ -194,6 +195,7 @@
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -211,13 +213,13 @@
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -232,12 +234,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
 CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -261,6 +265,7 @@
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -285,6 +290,8 @@
 #
 # Networking options
 #
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -428,6 +435,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -443,8 +451,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -579,6 +588,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -679,9 +692,12 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
 # CONFIG_NVRAM is not set
@@ -859,7 +875,6 @@
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -875,6 +890,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -911,10 +927,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -923,6 +936,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1002,6 +1016,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1051,6 +1066,7 @@
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1060,6 +1076,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1069,11 +1087,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1099,6 +1119,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig
index 59cbd27..3b77f09 100644
--- a/arch/powerpc/configs/44x/warp_defconfig
+++ b/arch/powerpc/configs/44x/warp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 09:16:22 2008
+# Linux kernel version: 2.6.29-rc2
+# Fri Jan 23 07:57:16 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -19,6 +19,7 @@
 CONFIG_BOOKE=y
 CONFIG_PTE_64BIT=y
 CONFIG_PHYS_64BIT=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -44,7 +45,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +76,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -113,7 +114,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -124,7 +124,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -132,11 +131,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -153,6 +150,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -190,6 +191,7 @@
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -213,6 +215,7 @@
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -227,12 +230,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
 CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -273,6 +278,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -348,6 +354,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -360,6 +367,7 @@
 # CONFIG_AF_RXRPC is not set
 # CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -380,8 +388,9 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
 
@@ -396,7 +405,7 @@
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
-CONFIG_MTD_OOPS=m
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -450,6 +459,7 @@
 CONFIG_MTD_NAND_ECC_SMC=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_NDFC=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
@@ -458,6 +468,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -480,7 +496,9 @@
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -562,6 +580,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -616,9 +638,12 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -638,7 +663,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
-# CONFIG_I2C_IBM_IIC is not set
+CONFIG_I2C_IBM_IIC=y
 # CONFIG_I2C_MPC is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -660,8 +685,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=y
+CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -679,7 +704,7 @@
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
+CONFIG_SENSORS_AD7414=y
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -687,8 +712,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -708,6 +735,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -729,13 +757,26 @@
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=y
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_PIKA_WDT=y
+# CONFIG_BOOKE_WDT is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -744,9 +785,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -802,6 +847,7 @@
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -824,18 +870,17 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -880,14 +925,18 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
-CONFIG_MMC=m
+
+#
+# OTG and related infrastructure
+#
+CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
 # MMC/SD/SDIO Card Drivers
 #
-CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK=y
 CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_SDIO_UART is not set
 # CONFIG_MMC_TEST is not set
@@ -898,7 +947,18 @@
 # CONFIG_MMC_SDHCI is not set
 # CONFIG_MMC_WBSD is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+# CONFIG_LEDS_TRIGGERS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
@@ -912,14 +972,18 @@
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -952,13 +1016,11 @@
 CONFIG_PROC_SYSCTL=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -978,6 +1040,7 @@
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1057,6 +1120,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1107,6 +1171,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1115,18 +1180,24 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1134,7 +1205,7 @@
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
 # CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
+CONFIG_IRQSTACKS=y
 # CONFIG_VIRQ_DEBUG is not set
 CONFIG_BDI_SWITCH=y
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1153,6 +1224,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig
index 3df62749..99c495a 100644
--- a/arch/powerpc/configs/52xx/cm5200_defconfig
+++ b/arch/powerpc/configs/52xx/cm5200_defconfig
@@ -629,8 +629,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig
index 5b969f9..9796220 100644
--- a/arch/powerpc/configs/52xx/lite5200b_defconfig
+++ b/arch/powerpc/configs/52xx/lite5200b_defconfig
@@ -762,8 +762,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig
index 3c0d4e5..d081e00 100644
--- a/arch/powerpc/configs/52xx/motionpro_defconfig
+++ b/arch/powerpc/configs/52xx/motionpro_defconfig
@@ -629,8 +629,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=y
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig
index 9d02077..b21b8e8 100644
--- a/arch/powerpc/configs/52xx/pcm030_defconfig
+++ b/arch/powerpc/configs/52xx/pcm030_defconfig
@@ -740,8 +740,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=m
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=m
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig
index bc19005..7995457 100644
--- a/arch/powerpc/configs/52xx/tqm5200_defconfig
+++ b/arch/powerpc/configs/52xx/tqm5200_defconfig
@@ -645,8 +645,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig
index cbecaf3..fc4a39a 100644
--- a/arch/powerpc/configs/83xx/asp8347_defconfig
+++ b/arch/powerpc/configs/83xx/asp8347_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:49 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:47 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -44,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -76,12 +76,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -114,7 +114,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -124,7 +123,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -132,11 +130,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -153,6 +149,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -199,6 +199,8 @@
 # CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 
 #
 # Kernel options
@@ -226,6 +228,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -237,12 +240,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -267,6 +272,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -289,6 +295,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -345,6 +352,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -360,8 +368,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -382,6 +391,7 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
@@ -456,6 +466,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -486,8 +502,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -536,6 +554,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -590,6 +611,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -666,8 +691,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -732,15 +759,14 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -760,8 +786,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -782,6 +810,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -827,11 +856,11 @@
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -840,18 +869,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -916,6 +940,7 @@
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
@@ -934,11 +959,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -977,6 +1002,10 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1014,6 +1043,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1061,6 +1091,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1094,10 +1125,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1117,6 +1145,7 @@
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1209,6 +1238,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1244,6 +1274,8 @@
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1251,6 +1283,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1269,11 +1302,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
index bfc32ea..9e47ae9 100644
--- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:50 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:48 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -44,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +75,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -113,7 +113,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,7 +122,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -131,11 +129,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -152,6 +148,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -198,6 +198,8 @@
 # CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 
 #
 # Kernel options
@@ -225,6 +227,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -236,12 +239,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -267,6 +272,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -289,6 +295,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -345,6 +352,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -360,8 +368,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -384,6 +393,7 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
@@ -468,6 +478,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -499,8 +515,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -543,6 +561,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -559,6 +578,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -627,6 +648,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -651,7 +675,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -661,6 +684,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -691,6 +715,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -715,6 +740,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -792,8 +821,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -858,15 +889,14 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -884,7 +914,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
@@ -902,8 +932,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -925,6 +957,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
@@ -971,11 +1004,11 @@
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -984,18 +1017,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -1080,6 +1108,7 @@
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -1106,18 +1135,17 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1177,9 +1205,11 @@
 # CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_AMD5536UDC is not set
 # CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
 CONFIG_USB_GADGET_NET2280=y
 CONFIG_USB_NET2280=y
 # CONFIG_USB_GADGET_GOKU is not set
@@ -1194,6 +1224,10 @@
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
 # CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1231,12 +1265,14 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
 # CONFIG_RTC_DRV_M41T94 is not set
 # CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1284,6 +1320,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1317,10 +1354,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1340,6 +1374,7 @@
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1397,6 +1432,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1448,6 +1484,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1457,6 +1494,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1465,11 +1504,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1496,11 +1537,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
index aad0e1a..03db97c 100644
--- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:51 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:49 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -44,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +75,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -113,7 +113,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,7 +122,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -131,11 +129,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -152,6 +148,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -198,6 +198,8 @@
 # CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 
 #
 # Kernel options
@@ -225,6 +227,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -236,12 +239,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -267,6 +272,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -289,6 +295,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -345,6 +352,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -360,8 +368,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -384,6 +393,7 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_OF_PARTS is not set
@@ -468,6 +478,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -499,8 +515,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -543,6 +561,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -559,6 +578,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -688,6 +709,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -712,7 +736,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -722,6 +745,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -752,6 +776,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -776,6 +801,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -853,8 +882,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -919,15 +950,14 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -945,7 +975,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
@@ -963,8 +993,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -986,6 +1018,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
@@ -1032,11 +1065,11 @@
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -1045,18 +1078,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -1141,6 +1169,7 @@
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -1167,18 +1196,17 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1238,9 +1266,11 @@
 # CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_AMD5536UDC is not set
 # CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
 CONFIG_USB_GADGET_NET2280=y
 CONFIG_USB_NET2280=y
 # CONFIG_USB_GADGET_GOKU is not set
@@ -1255,6 +1285,10 @@
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
 # CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1292,12 +1326,14 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
 # CONFIG_RTC_DRV_M41T94 is not set
 # CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1345,6 +1381,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1378,10 +1415,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1401,6 +1435,7 @@
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1458,6 +1493,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1509,6 +1545,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1518,6 +1555,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1526,11 +1565,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1557,11 +1598,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
index 9cb8c8b..fb17de5 100644
--- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:53 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:50 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -44,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +75,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -113,7 +113,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,7 +122,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -131,11 +129,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -152,6 +148,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -198,6 +198,8 @@
 CONFIG_QUICC_ENGINE=y
 # CONFIG_QE_GPIO is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 
 #
 # Kernel options
@@ -226,6 +228,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -237,12 +240,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -267,6 +272,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -289,6 +295,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -345,6 +352,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -360,8 +368,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -405,8 +414,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -449,6 +460,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -465,6 +477,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -523,6 +537,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -563,7 +580,6 @@
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
-# CONFIG_UGETH_FILTERING is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
@@ -572,6 +588,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -594,6 +611,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -665,8 +686,10 @@
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -730,15 +753,14 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -758,8 +780,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -780,6 +804,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -820,11 +845,11 @@
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -833,18 +858,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -900,9 +920,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -940,6 +964,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -987,6 +1012,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1020,10 +1046,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1032,6 +1055,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1087,6 +1111,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1120,6 +1145,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1127,6 +1154,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1145,11 +1173,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
index 9cc976f..a012ce2 100644
--- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:54 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:52 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -44,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +75,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -113,7 +113,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,7 +122,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -131,11 +129,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -152,6 +148,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -198,6 +198,8 @@
 CONFIG_QUICC_ENGINE=y
 # CONFIG_QE_GPIO is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 
 #
 # Kernel options
@@ -226,6 +228,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -237,12 +240,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -267,6 +272,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -289,6 +295,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -345,6 +352,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -360,8 +368,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -407,8 +416,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -451,6 +462,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -467,6 +479,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -525,6 +539,9 @@
 # CONFIG_BROADCOM_PHY is not set
 CONFIG_ICPLUS_PHY=y
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -566,7 +583,6 @@
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
-# CONFIG_UGETH_FILTERING is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
@@ -575,6 +591,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -599,6 +616,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -677,8 +698,10 @@
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -745,15 +768,14 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -770,7 +792,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
@@ -788,8 +810,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -811,6 +835,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
@@ -857,11 +882,11 @@
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -870,18 +895,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -966,6 +986,7 @@
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_EHCI_FSL is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -991,18 +1012,17 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1050,6 +1070,10 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
@@ -1099,6 +1123,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1135,10 +1160,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1147,6 +1169,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1246,6 +1269,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1279,6 +1303,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1286,6 +1312,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1304,11 +1331,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
index 07a674f..4bcc4a1 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:56 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:53 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -44,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +75,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -113,7 +113,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,7 +122,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -131,11 +129,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -152,6 +148,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -198,6 +198,8 @@
 # CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 
 #
 # Kernel options
@@ -225,6 +227,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -236,12 +239,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -266,6 +271,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -288,6 +294,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -344,6 +351,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -359,8 +367,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -381,6 +390,7 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 # CONFIG_MTD_PARTITIONS is not set
+# CONFIG_MTD_TESTS is not set
 
 #
 # User Modules And Translation Layers
@@ -426,9 +436,7 @@
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xfe000000
-CONFIG_MTD_PHYSMAP_LEN=0x1000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_PHYSMAP_OF is not set
 # CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
@@ -454,6 +462,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -485,8 +499,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -499,7 +515,6 @@
 # CONFIG_IDE_GD_ATAPI is not set
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -524,6 +539,7 @@
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -577,6 +593,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -593,6 +610,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -723,6 +742,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 CONFIG_FIXED_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 # CONFIG_NET_ETHERNET is not set
@@ -751,6 +773,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -775,6 +798,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -832,8 +859,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -898,15 +927,14 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -923,7 +951,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
@@ -953,11 +981,11 @@
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -966,18 +994,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -1041,6 +1064,7 @@
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
@@ -1059,18 +1083,17 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1117,6 +1140,10 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1154,12 +1181,14 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
 # CONFIG_RTC_DRV_M41T94 is not set
 # CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1207,6 +1236,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1243,10 +1273,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1256,6 +1283,7 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1352,6 +1380,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1385,6 +1414,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1392,6 +1423,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1410,11 +1442,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
index 426232c..9ba5518 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:57 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:55 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -44,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +75,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -113,7 +113,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,7 +122,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -131,11 +129,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -152,6 +148,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -198,6 +198,8 @@
 # CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 
 #
 # Kernel options
@@ -225,6 +227,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -236,12 +239,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -266,6 +271,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -288,6 +294,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -344,6 +351,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -359,8 +367,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -381,6 +390,7 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 # CONFIG_MTD_PARTITIONS is not set
+# CONFIG_MTD_TESTS is not set
 
 #
 # User Modules And Translation Layers
@@ -426,9 +436,7 @@
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xfe000000
-CONFIG_MTD_PHYSMAP_LEN=0x800000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_PHYSMAP_OF is not set
 # CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
@@ -454,6 +462,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -485,8 +499,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -529,6 +545,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -545,6 +562,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -603,6 +622,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 # CONFIG_NET_ETHERNET is not set
@@ -631,6 +653,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -655,6 +678,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -712,8 +739,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -778,15 +807,14 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -803,7 +831,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
@@ -833,11 +861,11 @@
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -846,18 +874,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -921,6 +944,7 @@
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
@@ -939,18 +963,17 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -996,6 +1019,10 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1033,12 +1060,14 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
 # CONFIG_RTC_DRV_M41T94 is not set
 # CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1086,6 +1115,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1122,10 +1152,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1135,6 +1162,7 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1231,6 +1259,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1264,6 +1293,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1271,6 +1302,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1289,11 +1321,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
index 36e2e93..18e4bc0 100644
--- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:58 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:56 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -44,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +75,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -113,7 +113,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,7 +122,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -131,11 +129,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -152,6 +148,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -198,6 +198,8 @@
 # CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 
 #
 # Kernel options
@@ -225,6 +227,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -236,12 +239,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -266,6 +271,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -288,6 +294,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -344,6 +351,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -359,8 +367,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -404,8 +413,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -454,6 +465,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -477,7 +491,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -487,6 +500,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -517,6 +531,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -539,6 +554,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -608,8 +627,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -673,15 +694,14 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -701,8 +721,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -723,6 +745,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -763,11 +786,11 @@
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -776,18 +799,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -843,9 +861,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -883,6 +905,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -930,6 +953,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -963,10 +987,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -975,6 +996,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1028,6 +1050,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1061,6 +1084,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1068,6 +1093,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1086,11 +1112,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
index 80eb6c9..76db813 100644
--- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:59 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:58 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -44,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +75,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -113,7 +113,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,7 +122,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -131,11 +129,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -152,6 +148,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -197,6 +197,8 @@
 CONFIG_QUICC_ENGINE=y
 # CONFIG_QE_GPIO is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 
 #
 # Kernel options
@@ -224,6 +226,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -235,12 +238,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -265,6 +270,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -287,6 +293,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -343,6 +350,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -358,8 +366,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -380,6 +389,7 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_OF_PARTS is not set
@@ -451,6 +461,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -480,8 +496,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -524,6 +542,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -540,6 +559,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -598,6 +619,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -638,7 +662,6 @@
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
-# CONFIG_UGETH_FILTERING is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
@@ -647,6 +670,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -669,6 +693,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -740,8 +768,10 @@
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -805,15 +835,14 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -833,8 +862,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -855,6 +886,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -895,11 +927,11 @@
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -908,18 +940,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -975,9 +1002,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1015,6 +1046,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1062,6 +1094,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1095,10 +1128,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1108,6 +1138,7 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1163,6 +1194,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1196,6 +1228,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1203,6 +1237,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1221,11 +1256,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
index b9b2368..0dc11c4 100644
--- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:00 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:01 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -45,7 +45,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -76,12 +76,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -114,7 +114,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -124,7 +123,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -132,11 +130,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -153,6 +149,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -198,6 +198,8 @@
 CONFIG_QUICC_ENGINE=y
 CONFIG_QE_GPIO=y
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 
 #
 # Kernel options
@@ -224,6 +226,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -235,12 +238,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -267,6 +272,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -289,6 +295,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -345,6 +352,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -360,8 +368,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -384,6 +393,7 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_OF_PARTS is not set
@@ -462,6 +472,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -493,8 +509,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -543,6 +561,9 @@
 CONFIG_BROADCOM_PHY=y
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 # CONFIG_NET_ETHERNET is not set
@@ -566,7 +587,6 @@
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
-# CONFIG_UGETH_FILTERING is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
@@ -582,6 +602,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -656,8 +680,10 @@
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_SERIAL_QE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -723,16 +749,14 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -744,12 +768,13 @@
 # SPI Master Controller Drivers
 #
 CONFIG_SPI_BITBANG=y
+# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_MPC83xx=y
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=y
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
@@ -758,6 +783,11 @@
 # CONFIG_GPIO_SYSFS is not set
 
 #
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
 # I2C GPIO expanders:
 #
 # CONFIG_GPIO_MAX732X is not set
@@ -794,11 +824,11 @@
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -807,18 +837,14 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -897,6 +923,7 @@
 # CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -962,6 +989,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -995,10 +1023,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1018,6 +1043,7 @@
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1074,6 +1100,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1109,6 +1136,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1116,6 +1145,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 CONFIG_PPC_EARLY_DEBUG=y
@@ -1145,11 +1175,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
index f6350d7..e42f6b39 100644
--- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:00 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:59 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -44,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +75,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -113,7 +113,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -124,7 +123,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -132,11 +130,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -153,6 +149,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -199,6 +199,8 @@
 # CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 
 #
 # Kernel options
@@ -225,6 +227,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -236,12 +239,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -266,6 +271,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -288,6 +294,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -344,6 +351,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -359,8 +367,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -404,8 +413,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -448,6 +459,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -464,6 +476,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -583,6 +597,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -628,6 +645,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -650,6 +668,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -720,8 +742,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -787,15 +811,14 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -815,8 +838,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -837,6 +862,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -877,11 +903,11 @@
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -890,18 +916,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -957,9 +978,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -991,6 +1016,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1024,10 +1050,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1036,6 +1059,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1093,6 +1117,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1124,6 +1149,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1131,6 +1158,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1149,11 +1177,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
index f447de1..408022f 100644
--- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:01 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:01 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -44,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +75,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -113,7 +113,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -124,7 +123,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -132,11 +130,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -153,6 +149,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -199,6 +199,8 @@
 # CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 
 #
 # Kernel options
@@ -225,6 +227,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -236,12 +239,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -266,6 +271,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -288,6 +294,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -339,6 +346,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -354,8 +362,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -400,8 +409,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -460,6 +471,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -590,6 +603,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 CONFIG_FIXED_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -644,6 +660,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -721,8 +741,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -789,15 +811,14 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -817,8 +838,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -839,6 +862,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -884,11 +908,11 @@
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -897,18 +921,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -961,11 +980,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -973,12 +990,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -1011,6 +1031,7 @@
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
@@ -1029,11 +1050,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 # CONFIG_USB_STORAGE is not set
 # CONFIG_USB_LIBUSUAL is not set
@@ -1074,6 +1095,10 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1105,6 +1130,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1138,10 +1164,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1150,6 +1173,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1207,6 +1231,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1238,6 +1263,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1245,6 +1272,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1267,11 +1295,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig
index 8d2d7ee..a0c42fb 100644
--- a/arch/powerpc/configs/83xx/sbc834x_defconfig
+++ b/arch/powerpc/configs/83xx/sbc834x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:02 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:02 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -44,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +75,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -112,7 +112,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -122,7 +121,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -130,11 +128,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -151,6 +147,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -197,6 +197,8 @@
 # CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 
 #
 # Kernel options
@@ -223,6 +225,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -234,12 +237,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -264,6 +269,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -286,6 +292,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -342,6 +349,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -357,8 +365,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -402,8 +411,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -452,6 +463,9 @@
 CONFIG_BROADCOM_PHY=y
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -504,6 +518,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -573,8 +591,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -640,15 +660,14 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -668,8 +687,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -690,6 +711,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -730,11 +752,11 @@
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -743,18 +765,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -822,6 +839,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -855,10 +873,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -867,6 +882,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -908,6 +924,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -939,6 +956,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -946,6 +965,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -964,11 +984,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig
index 1af7b9e..6479bb9 100644
--- a/arch/powerpc/configs/85xx/ksi8560_defconfig
+++ b/arch/powerpc/configs/85xx/ksi8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:03 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:03 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -21,7 +21,9 @@
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -46,7 +48,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -76,8 +78,8 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -111,7 +113,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -122,13 +123,11 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -145,6 +144,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -185,6 +188,7 @@
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -222,12 +226,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -268,6 +274,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -324,6 +331,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -339,8 +347,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -432,6 +441,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -454,6 +469,7 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -507,9 +523,12 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
-# CONFIG_MDIO_OF_GPIO is not set
+# CONFIG_MDIO_GPIO is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -534,6 +553,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -595,8 +618,10 @@
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -614,6 +639,11 @@
 # CONFIG_GPIO_SYSFS is not set
 
 #
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
 # I2C GPIO expanders:
 #
 
@@ -642,11 +672,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -656,14 +686,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -716,9 +739,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -749,6 +776,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -782,10 +810,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -795,6 +820,7 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -845,6 +871,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -895,6 +922,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -904,6 +932,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -912,11 +942,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -943,6 +975,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/85xx/mpc8536_ds_defconfig b/arch/powerpc/configs/85xx/mpc8536_ds_defconfig
index e243e14..e31b6a4 100644
--- a/arch/powerpc/configs/85xx/mpc8536_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8536_ds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:05 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:04 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -21,7 +21,9 @@
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -45,7 +47,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -78,12 +80,12 @@
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -96,6 +98,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -118,7 +121,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -129,7 +131,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -137,11 +138,9 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -158,6 +157,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -197,6 +200,7 @@
 # CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -235,12 +239,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -265,6 +271,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -288,6 +295,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -376,6 +384,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -392,8 +401,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -442,8 +452,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -487,6 +499,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -503,6 +516,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -622,6 +637,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -668,6 +686,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -692,6 +711,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -783,8 +806,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -849,8 +874,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=y
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -869,11 +894,11 @@
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -882,18 +907,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -920,6 +940,7 @@
 CONFIG_MEDIA_TUNER_MT20XX=m
 CONFIG_MEDIA_TUNER_XC2028=m
 CONFIG_MEDIA_TUNER_XC5000=m
+# CONFIG_DVB_DYNAMIC_MINORS is not set
 CONFIG_DVB_CAPTURE_DRIVERS=y
 
 #
@@ -965,6 +986,12 @@
 # CONFIG_DVB_FE_CUSTOMISE is not set
 
 #
+# Multistandard (satellite) frontends
+#
+# CONFIG_DVB_STB0899 is not set
+# CONFIG_DVB_STB6100 is not set
+
+#
 # DVB-S (satellite) frontends
 #
 # CONFIG_DVB_CX24110 is not set
@@ -976,8 +1003,10 @@
 # CONFIG_DVB_STV0299 is not set
 # CONFIG_DVB_TDA8083 is not set
 # CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_TDA8261 is not set
 # CONFIG_DVB_VES1X93 is not set
 # CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TUNER_CX24113 is not set
 # CONFIG_DVB_TDA826X is not set
 # CONFIG_DVB_TUA6100 is not set
 # CONFIG_DVB_CX24116 is not set
@@ -1018,11 +1047,17 @@
 # CONFIG_DVB_OR51132 is not set
 # CONFIG_DVB_BCM3510 is not set
 # CONFIG_DVB_LGDT330X is not set
+# CONFIG_DVB_LGDT3304 is not set
 # CONFIG_DVB_S5H1409 is not set
 # CONFIG_DVB_AU8522 is not set
 # CONFIG_DVB_S5H1411 is not set
 
 #
+# ISDB-T (terrestrial) frontends
+#
+# CONFIG_DVB_S921 is not set
+
+#
 # Digital terrestrial only tuners/PLL
 #
 # CONFIG_DVB_PLL is not set
@@ -1073,6 +1108,7 @@
 # CONFIG_SND_SEQUENCER is not set
 # CONFIG_SND_MIXER_OSS is not set
 # CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
 CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
@@ -1175,11 +1211,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -1187,12 +1221,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -1225,6 +1262,7 @@
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -1250,18 +1288,17 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1309,6 +1346,10 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1346,6 +1387,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1405,7 +1447,9 @@
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1447,10 +1491,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 CONFIG_ADFS_FS=m
 # CONFIG_ADFS_FS_RW is not set
 CONFIG_AFFS_FS=m
@@ -1461,6 +1502,7 @@
 CONFIG_BFS_FS=m
 CONFIG_EFS_FS=m
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1562,6 +1604,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1613,6 +1656,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1622,6 +1666,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1630,11 +1676,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1661,11 +1709,16 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1699,7 +1752,7 @@
 #
 # Digest
 #
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
index d790cba..905e8a3 100644
--- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:06 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:05 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -21,7 +21,9 @@
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -45,7 +47,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +77,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -114,7 +116,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -124,13 +125,11 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -147,6 +146,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -186,6 +189,7 @@
 # CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -224,12 +228,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -270,6 +276,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -326,6 +333,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -341,8 +349,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -380,6 +389,7 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -415,6 +425,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -437,6 +450,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -502,8 +519,10 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -534,11 +553,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -548,14 +567,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -608,9 +620,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -640,6 +656,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -673,10 +690,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -685,6 +699,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -735,6 +750,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -784,6 +800,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -793,6 +810,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -801,11 +820,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -831,6 +852,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
index f6cb014..f6fa0b7 100644
--- a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:08 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:07 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -21,7 +21,9 @@
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -45,7 +47,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -78,12 +80,12 @@
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -96,6 +98,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -118,7 +121,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -129,7 +131,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -137,11 +138,9 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -158,6 +157,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -197,6 +200,7 @@
 # CONFIG_CPM2 is not set
 CONFIG_FSL_ULI1575=y
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -235,12 +239,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -266,6 +272,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -289,6 +296,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -377,6 +385,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -393,8 +402,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -443,8 +453,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -488,6 +500,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -504,6 +517,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -623,6 +638,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -667,6 +685,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -691,6 +710,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -782,8 +805,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 CONFIG_NVRAM=y
@@ -848,8 +873,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=y
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -869,11 +894,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -882,18 +907,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -920,6 +940,7 @@
 CONFIG_MEDIA_TUNER_MT20XX=m
 CONFIG_MEDIA_TUNER_XC2028=m
 CONFIG_MEDIA_TUNER_XC5000=m
+# CONFIG_DVB_DYNAMIC_MINORS is not set
 CONFIG_DVB_CAPTURE_DRIVERS=y
 
 #
@@ -965,6 +986,12 @@
 # CONFIG_DVB_FE_CUSTOMISE is not set
 
 #
+# Multistandard (satellite) frontends
+#
+# CONFIG_DVB_STB0899 is not set
+# CONFIG_DVB_STB6100 is not set
+
+#
 # DVB-S (satellite) frontends
 #
 # CONFIG_DVB_CX24110 is not set
@@ -976,8 +1003,10 @@
 # CONFIG_DVB_STV0299 is not set
 # CONFIG_DVB_TDA8083 is not set
 # CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_TDA8261 is not set
 # CONFIG_DVB_VES1X93 is not set
 # CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TUNER_CX24113 is not set
 # CONFIG_DVB_TDA826X is not set
 # CONFIG_DVB_TUA6100 is not set
 # CONFIG_DVB_CX24116 is not set
@@ -1018,11 +1047,17 @@
 # CONFIG_DVB_OR51132 is not set
 # CONFIG_DVB_BCM3510 is not set
 # CONFIG_DVB_LGDT330X is not set
+# CONFIG_DVB_LGDT3304 is not set
 # CONFIG_DVB_S5H1409 is not set
 # CONFIG_DVB_AU8522 is not set
 # CONFIG_DVB_S5H1411 is not set
 
 #
+# ISDB-T (terrestrial) frontends
+#
+# CONFIG_DVB_S921 is not set
+
+#
 # Digital terrestrial only tuners/PLL
 #
 # CONFIG_DVB_PLL is not set
@@ -1075,6 +1110,7 @@
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
 CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
 CONFIG_SND_VERBOSE_PROCFS=y
@@ -1177,11 +1213,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -1189,12 +1223,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -1227,6 +1264,7 @@
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_EHCI_FSL is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -1252,18 +1290,17 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1311,6 +1348,10 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1348,6 +1389,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1406,7 +1448,9 @@
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1448,10 +1492,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 CONFIG_ADFS_FS=m
 # CONFIG_ADFS_FS_RW is not set
 CONFIG_AFFS_FS=m
@@ -1462,6 +1503,7 @@
 CONFIG_BFS_FS=m
 CONFIG_EFS_FS=m
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1563,6 +1605,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1614,6 +1657,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1623,6 +1667,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1631,11 +1677,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1661,11 +1709,16 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1699,7 +1752,7 @@
 #
 # Digest
 #
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
index 6cf9292..095e2de 100644
--- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:09 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:09 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -21,7 +21,9 @@
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -46,7 +48,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -76,12 +78,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -116,7 +118,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -127,13 +128,11 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -150,6 +149,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -190,6 +193,7 @@
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -227,12 +231,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -257,6 +263,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 CONFIG_PCI_DEBUG=y
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -280,6 +287,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -336,6 +344,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -351,8 +360,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -400,6 +410,7 @@
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -448,6 +459,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -496,6 +510,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -518,6 +533,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -583,8 +602,10 @@
 CONFIG_SERIAL_CPM_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -604,6 +625,11 @@
 # CONFIG_GPIO_SYSFS is not set
 
 #
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
 # I2C GPIO expanders:
 #
 
@@ -637,11 +663,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -651,14 +677,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -714,9 +733,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -748,6 +771,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -781,10 +805,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -793,6 +814,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -843,6 +865,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -892,6 +915,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -901,6 +925,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -909,11 +935,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -939,6 +967,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/85xx/mpc8568mds_defconfig b/arch/powerpc/configs/85xx/mpc8568mds_defconfig
index 597be84..186c101 100644
--- a/arch/powerpc/configs/85xx/mpc8568mds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8568mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:11 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:10 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -21,7 +21,9 @@
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -45,7 +47,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +77,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -113,7 +115,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,7 +124,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -131,11 +131,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -152,6 +150,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -192,6 +194,7 @@
 # CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -230,12 +233,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -260,6 +265,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -283,6 +289,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -339,6 +346,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -354,8 +362,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -401,8 +410,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -445,6 +456,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -461,6 +473,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -519,6 +533,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -564,6 +581,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -586,6 +604,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -658,8 +680,10 @@
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -723,8 +747,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -750,8 +774,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -772,6 +798,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -812,11 +839,11 @@
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -825,18 +852,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -892,9 +914,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -932,6 +958,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -979,6 +1006,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1012,10 +1040,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1024,6 +1049,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1077,6 +1103,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1126,6 +1153,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1135,6 +1163,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1143,11 +1173,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1184,11 +1216,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
index 32aeb79..813223a 100644
--- a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc8
-# Tue Dec 30 11:17:46 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:12 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -48,7 +48,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -81,12 +81,12 @@
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -99,6 +99,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -121,7 +122,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -133,7 +133,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -141,12 +140,10 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -163,6 +160,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -242,7 +243,6 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -276,6 +276,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -299,6 +300,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -387,6 +389,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -403,8 +406,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -500,6 +504,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -516,6 +521,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -635,6 +642,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -679,6 +689,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -703,6 +714,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -794,6 +809,7 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
@@ -861,8 +877,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=y
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -895,10 +911,12 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
 
 #
@@ -926,6 +944,7 @@
 CONFIG_MEDIA_TUNER_MT20XX=m
 CONFIG_MEDIA_TUNER_XC2028=m
 CONFIG_MEDIA_TUNER_XC5000=m
+# CONFIG_DVB_DYNAMIC_MINORS is not set
 CONFIG_DVB_CAPTURE_DRIVERS=y
 
 #
@@ -971,6 +990,12 @@
 # CONFIG_DVB_FE_CUSTOMISE is not set
 
 #
+# Multistandard (satellite) frontends
+#
+# CONFIG_DVB_STB0899 is not set
+# CONFIG_DVB_STB6100 is not set
+
+#
 # DVB-S (satellite) frontends
 #
 # CONFIG_DVB_CX24110 is not set
@@ -982,8 +1007,10 @@
 # CONFIG_DVB_STV0299 is not set
 # CONFIG_DVB_TDA8083 is not set
 # CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_TDA8261 is not set
 # CONFIG_DVB_VES1X93 is not set
 # CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TUNER_CX24113 is not set
 # CONFIG_DVB_TDA826X is not set
 # CONFIG_DVB_TUA6100 is not set
 # CONFIG_DVB_CX24116 is not set
@@ -1024,11 +1051,17 @@
 # CONFIG_DVB_OR51132 is not set
 # CONFIG_DVB_BCM3510 is not set
 # CONFIG_DVB_LGDT330X is not set
+# CONFIG_DVB_LGDT3304 is not set
 # CONFIG_DVB_S5H1409 is not set
 # CONFIG_DVB_AU8522 is not set
 # CONFIG_DVB_S5H1411 is not set
 
 #
+# ISDB-T (terrestrial) frontends
+#
+# CONFIG_DVB_S921 is not set
+
+#
 # Digital terrestrial only tuners/PLL
 #
 # CONFIG_DVB_PLL is not set
@@ -1081,6 +1114,7 @@
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
 CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
 CONFIG_SND_VERBOSE_PROCFS=y
@@ -1183,11 +1217,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -1195,12 +1227,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -1233,6 +1268,7 @@
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_EHCI_FSL is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -1269,7 +1305,6 @@
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1317,6 +1352,10 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1401,7 +1440,9 @@
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1443,10 +1484,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 CONFIG_ADFS_FS=m
 # CONFIG_ADFS_FS_RW is not set
 CONFIG_AFFS_FS=m
@@ -1457,6 +1495,7 @@
 CONFIG_BFS_FS=m
 CONFIG_EFS_FS=m
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1558,6 +1597,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1609,6 +1649,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1618,6 +1659,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1626,6 +1669,7 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
@@ -1700,7 +1744,7 @@
 #
 # Digest
 #
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
index 8769359..f95961c 100644
--- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:14 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:13 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -21,7 +21,9 @@
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -45,7 +47,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +77,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -115,7 +117,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -125,13 +126,11 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -148,6 +147,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -187,6 +190,7 @@
 # CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -225,12 +229,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -255,6 +261,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -278,6 +285,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -334,6 +342,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -349,8 +358,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -397,6 +407,7 @@
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -439,6 +450,7 @@
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -498,6 +510,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -542,6 +557,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -564,6 +580,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -634,8 +654,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -672,11 +694,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -686,14 +708,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -749,9 +764,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -783,6 +802,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -816,10 +836,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -828,6 +845,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -878,6 +896,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -927,6 +946,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -936,6 +956,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -944,11 +966,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -974,6 +998,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig
index bfe3c97..e68e8098 100644
--- a/arch/powerpc/configs/85xx/sbc8548_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8548_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:16 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:15 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -21,7 +21,9 @@
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -45,7 +47,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +77,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -113,7 +115,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,13 +124,11 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -146,6 +145,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -185,6 +188,7 @@
 # CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -222,12 +226,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -251,6 +257,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -274,6 +281,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -330,6 +338,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -345,8 +354,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -391,6 +401,7 @@
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -439,6 +450,9 @@
 CONFIG_BROADCOM_PHY=y
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -483,6 +497,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -505,6 +520,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -575,8 +594,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -613,11 +634,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -627,14 +648,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -693,6 +707,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -726,10 +741,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -738,6 +750,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -776,6 +789,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -807,6 +821,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -814,6 +830,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -831,6 +848,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig
index 8c507f8..b1c766e 100644
--- a/arch/powerpc/configs/85xx/sbc8560_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:17 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:17 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -21,7 +21,9 @@
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -45,7 +47,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +77,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -113,7 +115,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,13 +124,11 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -146,6 +145,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -185,6 +188,7 @@
 # CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -222,12 +226,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -268,6 +274,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -324,6 +331,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -339,8 +347,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -378,6 +387,7 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -413,6 +423,9 @@
 CONFIG_BROADCOM_PHY=y
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -435,6 +448,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -500,8 +517,10 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -530,11 +549,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -544,14 +563,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -604,9 +616,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -666,6 +682,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -699,10 +716,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -711,6 +725,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -761,6 +776,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -809,6 +825,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -818,6 +835,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -826,11 +845,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -867,6 +888,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig
index 5a0cf58..eb4ba7a 100644
--- a/arch/powerpc/configs/85xx/stx_gp3_defconfig
+++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:19 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:18 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -21,7 +21,9 @@
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -46,7 +48,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -76,12 +78,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -116,7 +118,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -128,18 +129,15 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -156,6 +154,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -196,6 +198,7 @@
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -233,12 +236,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -263,6 +268,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -286,6 +292,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -400,6 +407,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -415,8 +423,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -470,14 +479,17 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
 CONFIG_IDE_GD_ATA=y
@@ -485,7 +497,6 @@
 CONFIG_BLK_DEV_IDECD=m
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -510,6 +521,7 @@
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -564,6 +576,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -580,6 +593,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -640,6 +655,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -686,6 +704,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -708,6 +727,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -805,11 +828,13 @@
 CONFIG_SERIAL_CPM_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=m
 # CONFIG_LP_CONSOLE is not set
 # CONFIG_PPDEV is not set
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
 # CONFIG_NVRAM is not set
@@ -823,6 +848,7 @@
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=m
 
 #
 # I2C Hardware Bus support
@@ -877,13 +903,12 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -898,6 +923,11 @@
 # CONFIG_GPIO_SYSFS is not set
 
 #
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
 # I2C GPIO expanders:
 #
 # CONFIG_GPIO_MAX732X is not set
@@ -924,8 +954,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -946,6 +978,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -972,11 +1005,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -985,17 +1018,12 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -1061,9 +1089,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1096,6 +1128,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1135,10 +1168,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1147,6 +1177,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1227,6 +1258,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=m
@@ -1278,6 +1310,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1287,6 +1320,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1295,11 +1330,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1325,6 +1362,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig
index f3e4f34..f4379b1 100644
--- a/arch/powerpc/configs/85xx/tqm8540_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8540_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:20 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:19 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -21,7 +21,9 @@
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -45,7 +47,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +77,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -113,7 +115,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,13 +124,11 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -146,6 +145,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -186,6 +189,7 @@
 # CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -223,12 +227,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -252,6 +258,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -273,6 +280,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -329,6 +337,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -344,8 +353,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -435,6 +445,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -464,8 +480,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -508,6 +526,7 @@
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -567,6 +586,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -590,7 +612,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -600,6 +621,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -629,6 +651,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -651,6 +674,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -721,8 +748,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -787,8 +816,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -814,8 +843,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -836,6 +867,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -862,11 +894,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -875,18 +907,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -942,9 +969,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -976,6 +1007,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1009,10 +1041,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1032,6 +1061,7 @@
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1082,6 +1112,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1117,6 +1148,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1124,6 +1157,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1141,6 +1175,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig
index c624893..b866923 100644
--- a/arch/powerpc/configs/85xx/tqm8541_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8541_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:21 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:20 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -21,7 +21,9 @@
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -46,7 +48,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -76,12 +78,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -114,7 +116,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -125,13 +126,11 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -148,6 +147,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -189,6 +192,7 @@
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -226,12 +230,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -255,6 +261,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -276,6 +283,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -332,6 +340,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -347,8 +356,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -438,6 +448,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -468,8 +484,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -512,6 +530,7 @@
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -571,6 +590,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -594,7 +616,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -604,6 +625,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -634,6 +656,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -656,6 +679,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -728,8 +755,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -796,13 +825,12 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -816,6 +844,11 @@
 # CONFIG_GPIO_SYSFS is not set
 
 #
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
 # I2C GPIO expanders:
 #
 # CONFIG_GPIO_MAX732X is not set
@@ -842,8 +875,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -864,6 +899,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -890,11 +926,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -903,18 +939,14 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -970,9 +1002,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1004,6 +1040,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1037,10 +1074,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1060,6 +1094,7 @@
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1110,6 +1145,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1145,6 +1181,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1152,6 +1190,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1169,6 +1208,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig
index eef45b9..0bc4597 100644
--- a/arch/powerpc/configs/85xx/tqm8548_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8548_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:22 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:20 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -21,7 +21,9 @@
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -45,7 +47,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +77,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -115,7 +117,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -126,7 +127,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -134,11 +134,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -155,6 +153,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -195,6 +197,7 @@
 # CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -233,12 +236,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -265,6 +270,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -288,6 +294,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -344,6 +351,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -359,8 +367,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -383,6 +392,7 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
@@ -465,6 +475,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 CONFIG_MTD_UBI=m
@@ -502,8 +518,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -546,6 +564,7 @@
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -605,6 +624,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -649,6 +671,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -671,6 +694,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -741,8 +768,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -806,8 +835,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -833,8 +862,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -855,6 +886,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -881,11 +913,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -894,18 +926,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -961,9 +988,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1001,6 +1032,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1048,6 +1080,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1081,10 +1114,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1095,6 +1125,7 @@
 # CONFIG_JFFS2_FS is not set
 # CONFIG_UBIFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1145,6 +1176,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1194,6 +1226,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1203,6 +1236,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1211,11 +1246,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1241,6 +1278,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig
index 11b637e..d5a864d 100644
--- a/arch/powerpc/configs/85xx/tqm8555_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8555_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:23 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:21 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -21,7 +21,9 @@
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -46,7 +48,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -76,12 +78,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -114,7 +116,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -125,13 +126,11 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -148,6 +147,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -189,6 +192,7 @@
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -226,12 +230,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -255,6 +261,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -276,6 +283,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -332,6 +340,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -347,8 +356,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -438,6 +448,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -468,8 +484,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -512,6 +530,7 @@
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -571,6 +590,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -594,7 +616,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -604,6 +625,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -634,6 +656,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -656,6 +679,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -728,8 +755,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -796,13 +825,12 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -816,6 +844,11 @@
 # CONFIG_GPIO_SYSFS is not set
 
 #
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
 # I2C GPIO expanders:
 #
 # CONFIG_GPIO_MAX732X is not set
@@ -842,8 +875,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -864,6 +899,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -890,11 +926,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -903,18 +939,14 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -970,9 +1002,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1004,6 +1040,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1037,10 +1074,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1060,6 +1094,7 @@
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1110,6 +1145,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1145,6 +1181,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1152,6 +1190,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1169,6 +1208,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig
index 2519169..a250091 100644
--- a/arch/powerpc/configs/85xx/tqm8560_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:25 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:22 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -21,7 +21,9 @@
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -46,7 +48,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -76,12 +78,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -114,7 +116,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -125,13 +126,11 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -148,6 +147,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -189,6 +192,7 @@
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -226,12 +230,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -255,6 +261,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -276,6 +283,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -332,6 +340,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -347,8 +356,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -438,6 +448,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -468,8 +484,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -512,6 +530,7 @@
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -571,6 +590,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -594,7 +616,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -604,6 +625,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -634,6 +656,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -656,6 +679,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -728,8 +755,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -796,13 +825,12 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -816,6 +844,11 @@
 # CONFIG_GPIO_SYSFS is not set
 
 #
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
 # I2C GPIO expanders:
 #
 # CONFIG_GPIO_MAX732X is not set
@@ -842,8 +875,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -864,6 +899,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -890,11 +926,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -903,18 +939,14 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -970,9 +1002,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1004,6 +1040,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1037,10 +1074,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1060,6 +1094,7 @@
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1110,6 +1145,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1145,6 +1181,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1152,6 +1190,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1169,6 +1208,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
index 391874c..1ab5aba 100644
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:30 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:26 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -42,11 +42,12 @@
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -78,12 +79,12 @@
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
@@ -117,7 +118,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -129,7 +129,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -137,12 +136,10 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -159,6 +156,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -197,6 +198,7 @@
 # CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -215,7 +217,6 @@
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
@@ -225,6 +226,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -237,12 +239,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -270,6 +274,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 CONFIG_PCI_DEBUG=y
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 CONFIG_HAS_RAPIDIO=y
@@ -293,6 +298,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -502,6 +508,7 @@
 CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
+# CONFIG_NET_SCH_DRR is not set
 
 #
 # Classification
@@ -522,6 +529,7 @@
 # CONFIG_NET_CLS_ACT is not set
 # CONFIG_NET_CLS_IND is not set
 CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -538,8 +546,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -562,6 +571,7 @@
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_OF_PARTS is not set
@@ -638,10 +648,17 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -668,8 +685,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -729,6 +748,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -848,6 +869,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -902,6 +926,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -924,6 +952,7 @@
 # CONFIG_ATM_IA is not set
 # CONFIG_ATM_FORE200E is not set
 # CONFIG_ATM_HE is not set
+# CONFIG_ATM_SOLOS is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 CONFIG_PPP=m
@@ -1016,7 +1045,9 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -1055,6 +1086,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -1081,8 +1113,8 @@
 # Miscellaneous I2C Chip support
 #
 CONFIG_DS1682=y
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -1095,7 +1127,31 @@
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -1108,8 +1164,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1130,6 +1188,7 @@
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_LM92=y
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -1163,8 +1222,8 @@
 #
 # CONFIG_SOFT_WATCHDOG is not set
 # CONFIG_ALIM7101_WDT is not set
-# CONFIG_8xxx_WDT is not set
 CONFIG_GEF_WDT=y
+# CONFIG_8xxx_WDT is not set
 
 #
 # PCI-based Watchdog Cards
@@ -1176,11 +1235,11 @@
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -1189,18 +1248,14 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -1260,11 +1315,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -1272,12 +1325,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -1310,6 +1366,7 @@
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_EHCI_FSL is not set
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -1332,18 +1389,17 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1391,6 +1447,11 @@
 # CONFIG_USB_VST is not set
 # CONFIG_USB_ATM is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1478,6 +1539,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1514,10 +1576,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1527,6 +1586,7 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1613,6 +1673,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1663,6 +1724,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1672,6 +1734,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1681,11 +1745,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1706,6 +1772,7 @@
 # CONFIG_SECURITYFS is not set
 CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
+# CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_SECURITY_ROOTPLUG is not set
 CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
@@ -1716,11 +1783,16 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
index 72854a1..bbdf4bf 100644
--- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:28 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:24 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -44,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +75,12 @@
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -115,7 +115,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -126,7 +125,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -134,11 +132,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -155,6 +151,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -194,6 +194,7 @@
 # CONFIG_QUICC_ENGINE is not set
 CONFIG_FSL_ULI1575=y
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -213,7 +214,6 @@
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
@@ -221,6 +221,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -232,12 +233,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=12
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -265,6 +268,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 CONFIG_PCI_DEBUG=y
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -287,6 +291,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -360,6 +365,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -375,8 +381,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -401,6 +408,7 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_OF_PARTS is not set
@@ -481,6 +489,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -510,8 +524,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -524,7 +540,6 @@
 # CONFIG_IDE_GD_ATAPI is not set
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -549,6 +564,7 @@
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -618,6 +634,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -757,6 +775,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -841,7 +863,9 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -905,8 +929,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -926,11 +950,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -939,18 +963,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -1029,6 +1048,7 @@
 # CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -1054,6 +1074,7 @@
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
 CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
 CONFIG_SND_VERBOSE_PROCFS=y
@@ -1130,6 +1151,7 @@
 CONFIG_SND_SOC=y
 CONFIG_SND_SOC_MPC8610=y
 CONFIG_SND_SOC_MPC8610_HPCD=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
 # CONFIG_SND_SOC_ALL_CODECS is not set
 CONFIG_SND_SOC_CS4270=y
 CONFIG_SND_SOC_CS4270_VD33_ERRATA=y
@@ -1157,9 +1179,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1197,6 +1223,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1244,6 +1271,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
@@ -1276,10 +1304,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1289,6 +1314,7 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1388,6 +1414,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1438,6 +1465,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1447,6 +1475,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1455,11 +1485,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1486,6 +1518,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
index 41220ec..92acfdf 100644
--- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:29 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:25 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -45,7 +45,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -78,12 +78,12 @@
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -96,6 +96,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -118,7 +119,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -130,7 +130,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -138,12 +137,10 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -160,6 +157,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -198,6 +199,7 @@
 # CONFIG_QUICC_ENGINE is not set
 CONFIG_FSL_ULI1575=y
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -225,6 +227,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 # CONFIG_IRQ_ALL_CPUS is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -237,12 +240,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -268,6 +273,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 CONFIG_HAS_RAPIDIO=y
@@ -291,6 +297,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -379,6 +386,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -395,8 +403,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -445,8 +454,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -490,6 +501,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -506,6 +518,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -625,6 +639,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -670,6 +687,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -694,6 +712,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -785,8 +807,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
@@ -851,8 +875,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=y
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -872,11 +896,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -885,18 +909,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -923,6 +942,7 @@
 CONFIG_MEDIA_TUNER_MT20XX=m
 CONFIG_MEDIA_TUNER_XC2028=m
 CONFIG_MEDIA_TUNER_XC5000=m
+# CONFIG_DVB_DYNAMIC_MINORS is not set
 CONFIG_DVB_CAPTURE_DRIVERS=y
 
 #
@@ -968,6 +988,12 @@
 # CONFIG_DVB_FE_CUSTOMISE is not set
 
 #
+# Multistandard (satellite) frontends
+#
+# CONFIG_DVB_STB0899 is not set
+# CONFIG_DVB_STB6100 is not set
+
+#
 # DVB-S (satellite) frontends
 #
 # CONFIG_DVB_CX24110 is not set
@@ -979,8 +1005,10 @@
 # CONFIG_DVB_STV0299 is not set
 # CONFIG_DVB_TDA8083 is not set
 # CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_TDA8261 is not set
 # CONFIG_DVB_VES1X93 is not set
 # CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TUNER_CX24113 is not set
 # CONFIG_DVB_TDA826X is not set
 # CONFIG_DVB_TUA6100 is not set
 # CONFIG_DVB_CX24116 is not set
@@ -1021,11 +1049,17 @@
 # CONFIG_DVB_OR51132 is not set
 # CONFIG_DVB_BCM3510 is not set
 # CONFIG_DVB_LGDT330X is not set
+# CONFIG_DVB_LGDT3304 is not set
 # CONFIG_DVB_S5H1409 is not set
 # CONFIG_DVB_AU8522 is not set
 # CONFIG_DVB_S5H1411 is not set
 
 #
+# ISDB-T (terrestrial) frontends
+#
+# CONFIG_DVB_S921 is not set
+
+#
 # Digital terrestrial only tuners/PLL
 #
 # CONFIG_DVB_PLL is not set
@@ -1078,6 +1112,7 @@
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
 CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
 CONFIG_SND_VERBOSE_PROCFS=y
@@ -1180,11 +1215,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -1192,12 +1225,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -1230,6 +1266,7 @@
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_EHCI_FSL is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -1255,18 +1292,17 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1314,6 +1350,10 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1351,6 +1391,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1397,7 +1438,9 @@
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1439,10 +1482,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 CONFIG_ADFS_FS=m
 # CONFIG_ADFS_FS_RW is not set
 CONFIG_AFFS_FS=m
@@ -1453,6 +1493,7 @@
 CONFIG_BFS_FS=m
 CONFIG_EFS_FS=m
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1554,6 +1595,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1605,6 +1647,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1614,6 +1657,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1622,11 +1667,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1653,11 +1700,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1691,7 +1742,7 @@
 #
 # Digest
 #
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig
index a434286..04797e7 100644
--- a/arch/powerpc/configs/86xx/sbc8641d_defconfig
+++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:26 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:23 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -46,7 +46,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -78,12 +78,12 @@
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
@@ -117,7 +117,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -129,7 +128,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -137,12 +135,10 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -159,6 +155,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -197,6 +197,7 @@
 # CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -215,7 +216,6 @@
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
@@ -225,6 +225,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -237,12 +238,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -270,6 +273,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -292,6 +296,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -501,6 +506,7 @@
 CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
+# CONFIG_NET_SCH_DRR is not set
 
 #
 # Classification
@@ -521,6 +527,7 @@
 # CONFIG_NET_CLS_ACT is not set
 # CONFIG_NET_CLS_IND is not set
 CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -537,8 +544,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -561,6 +569,7 @@
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_OF_PARTS is not set
@@ -637,6 +646,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -666,8 +681,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -734,6 +751,9 @@
 CONFIG_BROADCOM_PHY=y
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -786,6 +806,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 CONFIG_ATM_DRIVERS=y
 # CONFIG_ATM_DUMMY is not set
@@ -801,6 +825,7 @@
 # CONFIG_ATM_IA is not set
 # CONFIG_ATM_FORE200E is not set
 # CONFIG_ATM_HE is not set
+# CONFIG_ATM_SOLOS is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 CONFIG_PPP=m
@@ -892,8 +917,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
 # CONFIG_NVRAM is not set
@@ -958,8 +985,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -985,8 +1012,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1007,6 +1036,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -1047,11 +1077,11 @@
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -1060,18 +1090,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -1134,9 +1159,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1182,11 +1211,18 @@
 CONFIG_OCFS2_FS_STATS=y
 CONFIG_OCFS2_DEBUG_MASKLOG=y
 # CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=m
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUOTACTL=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 # CONFIG_FUSE_FS is not set
@@ -1216,10 +1252,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1229,6 +1262,7 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=m
 # CONFIG_OMFS_FS is not set
@@ -1317,6 +1351,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1367,6 +1402,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1376,6 +1412,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1385,11 +1423,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1411,6 +1451,7 @@
 # CONFIG_SECURITYFS is not set
 CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
+# CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
 CONFIG_CRYPTO=y
@@ -1420,11 +1461,16 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig
index 024f279..aaab5cc 100644
--- a/arch/powerpc/configs/adder875_defconfig
+++ b/arch/powerpc/configs/adder875_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:32 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:24 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_8xx=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -40,7 +41,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -71,12 +72,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -109,7 +110,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -119,13 +119,11 @@
 CONFIG_HAVE_CLK=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -142,6 +140,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -187,6 +189,7 @@
 # CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -205,12 +208,12 @@
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_8XX_MINIMAL_FPEMU is not set
 # CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -225,12 +228,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -272,6 +277,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -323,6 +329,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -338,8 +345,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -428,6 +436,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -470,6 +484,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -495,6 +512,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -580,7 +601,9 @@
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -598,11 +621,11 @@
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -612,14 +635,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -674,6 +690,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
@@ -706,10 +723,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -719,6 +733,7 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -774,6 +789,7 @@
 #
 # Library routines
 #
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -821,6 +837,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -829,6 +846,8 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -837,11 +856,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
index 5078594..5103319 100644
--- a/arch/powerpc/configs/c2k_defconfig
+++ b/arch/powerpc/configs/c2k_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:34 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:26 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -45,7 +45,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -78,12 +78,12 @@
 CONFIG_AUDIT_TREE=y
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -122,6 +122,7 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
@@ -135,7 +136,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -143,11 +143,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -164,6 +162,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -221,6 +223,7 @@
 #
 # CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -243,10 +246,12 @@
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -258,12 +263,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -287,6 +294,7 @@
 CONFIG_PCI_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 CONFIG_HOTPLUG_PCI=y
 # CONFIG_HOTPLUG_PCI_FAKE is not set
@@ -314,6 +322,8 @@
 #
 # Networking options
 #
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -574,6 +584,7 @@
 CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
+# CONFIG_NET_SCH_DRR is not set
 
 #
 # Classification
@@ -594,6 +605,7 @@
 # CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_IND=y
 CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -616,8 +628,6 @@
 #
 # Bluetooth device drivers
 #
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
 # CONFIG_BT_HCIBTUSB is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
@@ -635,12 +645,9 @@
 CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -665,6 +672,7 @@
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=m
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
@@ -737,6 +745,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -834,6 +848,8 @@
 CONFIG_MEGARAID_SAS=m
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 CONFIG_SCSI_FUTURE_DOMAIN=m
@@ -852,6 +868,7 @@
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_QLA_ISCSI is not set
 CONFIG_SCSI_LPFC=m
+# CONFIG_SCSI_LPFC_DEBUG_FS is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
@@ -896,6 +913,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -949,6 +969,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -1055,7 +1079,9 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
 CONFIG_NVRAM=m
@@ -1124,8 +1150,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=m
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=m
 CONFIG_SENSORS_PCF8574=m
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -1151,8 +1177,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 CONFIG_SENSORS_ADM1031=m
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 CONFIG_SENSORS_DS1621=m
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1173,6 +1201,7 @@
 CONFIG_SENSORS_LM90=m
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 CONFIG_SENSORS_MAX1619=m
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -1218,11 +1247,11 @@
 # USB-based Watchdog Cards
 #
 CONFIG_USBPCWATCHDOG=m
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -1234,14 +1263,8 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -1298,7 +1321,7 @@
 # CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
 # CONFIG_USB_OTG is not set
-CONFIG_USB_MON=y
+CONFIG_USB_MON=m
 # CONFIG_USB_WUSB is not set
 # CONFIG_USB_WUSB_CBAF is not set
 
@@ -1310,6 +1333,7 @@
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=m
@@ -1339,18 +1363,17 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
 CONFIG_USB_STORAGE_ISD200=y
-CONFIG_USB_STORAGE_DPCM=y
 # CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
@@ -1419,12 +1442,14 @@
 # CONFIG_USB_SERIAL_HP4X is not set
 CONFIG_USB_SERIAL_SAFE=m
 CONFIG_USB_SERIAL_SAFE_PADDED=y
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
 # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
 # CONFIG_USB_SERIAL_TI is not set
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
 # CONFIG_USB_SERIAL_OPTION is not set
 CONFIG_USB_SERIAL_OMNINET=m
+# CONFIG_USB_SERIAL_OPTICON is not set
 # CONFIG_USB_SERIAL_DEBUG is not set
 
 #
@@ -1458,6 +1483,10 @@
 # CONFIG_USB_UEAGLEATM is not set
 # CONFIG_USB_XUSBATM is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1500,19 +1529,23 @@
 CONFIG_EXT3_FS_SECURITY=y
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=m
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 # CONFIG_QUOTA_NETLINK_INTERFACE is not set
 CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
 # CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
 CONFIG_QUOTACTL=y
@@ -1549,10 +1582,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_ECRYPT_FS is not set
@@ -1573,6 +1603,7 @@
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=m
+# CONFIG_SQUASHFS is not set
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1678,6 +1709,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=m
@@ -1703,7 +1735,7 @@
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
@@ -1722,6 +1754,7 @@
 # CONFIG_DEBUG_MUTEXES is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_HIGHMEM=y
 CONFIG_DEBUG_BUGVERBOSE=y
@@ -1731,6 +1764,7 @@
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1741,7 +1775,12 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
 
 #
 # Tracers
@@ -1750,11 +1789,14 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1763,6 +1805,7 @@
 # CONFIG_MSI_BITMAP_SELFTEST is not set
 # CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
+# CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 CONFIG_BOOTX_TEXT=y
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1776,6 +1819,7 @@
 # CONFIG_SECURITYFS is not set
 CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
+# CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
 CONFIG_SECURITY_SELINUX=y
@@ -1785,7 +1829,6 @@
 CONFIG_SECURITY_SELINUX_DEVELOP=y
 CONFIG_SECURITY_SELINUX_AVC_STATS=y
 CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
-# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
 # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
 CONFIG_CRYPTO=y
 
@@ -1794,11 +1837,16 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig
index c420e47..c6d2baa 100644
--- a/arch/powerpc/configs/cell_defconfig
+++ b/arch/powerpc/configs/cell_defconfig
@@ -1012,7 +1012,7 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/powerpc/configs/celleb_defconfig b/arch/powerpc/configs/celleb_defconfig
index 9ba3c6f..d212377 100644
--- a/arch/powerpc/configs/celleb_defconfig
+++ b/arch/powerpc/configs/celleb_defconfig
@@ -834,7 +834,7 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig
index 63b3c23..5094a65 100644
--- a/arch/powerpc/configs/chrp32_defconfig
+++ b/arch/powerpc/configs/chrp32_defconfig
@@ -941,8 +941,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig
index a6f1cff..add6419 100644
--- a/arch/powerpc/configs/ep8248e_defconfig
+++ b/arch/powerpc/configs/ep8248e_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:36 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:27 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -44,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -86,6 +86,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -107,7 +108,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -118,13 +118,11 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -140,6 +138,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -181,6 +183,7 @@
 CONFIG_CPM2=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -206,6 +209,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_FLATMEM=y
@@ -213,12 +217,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -243,6 +249,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -265,6 +272,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -346,6 +354,7 @@
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -360,8 +369,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 
 #
@@ -455,6 +465,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -522,9 +538,12 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
-# CONFIG_MDIO_OF_GPIO is not set
+# CONFIG_MDIO_GPIO is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
@@ -569,6 +588,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -591,6 +611,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_PPP is not set
@@ -633,6 +657,7 @@
 CONFIG_SERIAL_CPM_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -651,6 +676,11 @@
 # CONFIG_DEBUG_GPIO is not set
 
 #
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
 # I2C GPIO expanders:
 #
 
@@ -668,11 +698,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -682,14 +712,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -782,13 +805,11 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -877,6 +898,7 @@
 #
 # Library routines
 #
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -924,6 +946,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -933,6 +956,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -941,10 +966,12 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -971,11 +998,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig
index 870d289..b2fdfd9 100644
--- a/arch/powerpc/configs/ep88xc_defconfig
+++ b/arch/powerpc/configs/ep88xc_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:37 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:28 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_8xx=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -40,7 +41,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -70,12 +71,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -108,7 +109,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -118,13 +118,11 @@
 CONFIG_HAVE_CLK=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -141,6 +139,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -186,6 +188,7 @@
 # CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -205,12 +208,12 @@
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 CONFIG_8XX_MINIMAL_FPEMU=y
 # CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -225,12 +228,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -272,6 +277,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -323,6 +329,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -338,8 +345,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -428,6 +436,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -470,6 +484,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -495,6 +512,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -536,7 +557,9 @@
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -555,11 +578,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -569,14 +592,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -630,6 +646,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
@@ -662,10 +679,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -675,6 +689,7 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -730,6 +745,7 @@
 #
 # Library routines
 #
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -777,6 +793,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -785,6 +802,8 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -793,11 +812,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index f85e71c..fc90592 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -994,8 +994,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index 54fa624..aa5855a 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:38 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:29 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -43,7 +43,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -74,12 +74,12 @@
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -118,7 +118,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -129,7 +128,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -137,11 +135,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -158,6 +154,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -200,6 +200,7 @@
 # CONFIG_TAU is not set
 # CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -227,6 +228,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -238,12 +240,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -267,6 +271,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -289,6 +294,8 @@
 #
 # Networking options
 #
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -455,6 +462,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -471,12 +479,9 @@
 CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-CONFIG_IEEE80211_DEBUG=y
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -501,6 +506,7 @@
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_OF_PARTS is not set
@@ -554,9 +560,7 @@
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xffc00000
-CONFIG_MTD_PHYSMAP_LEN=0x400000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_PHYSMAP_OF is not set
 # CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
@@ -580,6 +584,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -610,8 +620,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -654,6 +666,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -670,6 +683,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -827,6 +842,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -851,6 +867,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -949,8 +969,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -1015,8 +1037,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=m
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=m
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -1042,8 +1064,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1064,6 +1088,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -1090,11 +1115,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -1103,18 +1128,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -1165,12 +1185,6 @@
 # CONFIG_HID_PID is not set
 
 #
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
 # Special HID drivers
 #
 CONFIG_HID_COMPAT=y
@@ -1202,6 +1216,7 @@
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_EHCI_FSL is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -1227,18 +1242,17 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1295,12 +1309,14 @@
 # CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
 # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
 # CONFIG_USB_SERIAL_TI is not set
 # CONFIG_USB_SERIAL_CYBERJACK is not set
 # CONFIG_USB_SERIAL_XIRCOM is not set
 # CONFIG_USB_SERIAL_OPTION is not set
 # CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
 # CONFIG_USB_SERIAL_DEBUG is not set
 
 #
@@ -1329,6 +1345,10 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1366,6 +1386,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1417,6 +1438,7 @@
 # CONFIG_XFS_RT is not set
 # CONFIG_XFS_DEBUG is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1458,10 +1480,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1471,6 +1490,7 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1561,6 +1581,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1614,6 +1635,7 @@
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1623,6 +1645,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1631,11 +1655,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1662,11 +1688,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig
index 045f1b0..8b24400 100644
--- a/arch/powerpc/configs/maple_defconfig
+++ b/arch/powerpc/configs/maple_defconfig
@@ -866,8 +866,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig
index 8d3c623..c58c38d 100644
--- a/arch/powerpc/configs/mgcoge_defconfig
+++ b/arch/powerpc/configs/mgcoge_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:38 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:30 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -44,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -89,6 +89,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -111,7 +112,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -122,13 +122,11 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -144,6 +142,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -190,6 +192,7 @@
 CONFIG_CPM2=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -215,6 +218,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_FLATMEM=y
@@ -222,12 +226,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -253,6 +259,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -275,6 +282,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -337,6 +345,7 @@
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -351,8 +360,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 
 #
@@ -451,6 +461,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -522,6 +538,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 CONFIG_FIXED_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -558,6 +577,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_PPP is not set
@@ -601,6 +624,7 @@
 CONFIG_SERIAL_CPM_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_BRIQ_PANEL is not set
@@ -621,6 +645,11 @@
 # CONFIG_DEBUG_GPIO is not set
 
 #
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
 # I2C GPIO expanders:
 #
 
@@ -638,11 +667,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -652,14 +681,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -753,10 +775,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_HFSPLUS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
@@ -768,6 +787,7 @@
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -857,6 +877,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -905,6 +926,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -914,6 +936,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -922,10 +946,12 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -953,11 +979,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
diff --git a/arch/powerpc/configs/mgsuvd_defconfig b/arch/powerpc/configs/mgsuvd_defconfig
index fbaa67f..297b5d5 100644
--- a/arch/powerpc/configs/mgsuvd_defconfig
+++ b/arch/powerpc/configs/mgsuvd_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:39 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:32 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_8xx=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -40,7 +41,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -69,12 +70,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -106,7 +107,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -117,13 +117,11 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -140,6 +138,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -186,6 +188,7 @@
 # CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -209,6 +212,7 @@
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -223,12 +227,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -269,6 +275,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -325,6 +332,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -340,8 +348,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -435,6 +444,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -489,6 +504,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 CONFIG_FIXED_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -514,6 +532,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -555,7 +577,9 @@
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -574,11 +598,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -588,14 +612,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -659,6 +676,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -692,10 +710,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -715,6 +730,7 @@
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -771,6 +787,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -802,6 +819,8 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -809,6 +828,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -827,6 +847,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index 15c5604..5ff3de2 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -844,8 +844,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig
index f80b1ca..38712e8 100644
--- a/arch/powerpc/configs/mpc7448_hpc2_defconfig
+++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:40 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:33 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -43,7 +43,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -73,12 +73,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -112,7 +112,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -122,13 +121,11 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -145,6 +142,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -184,6 +185,7 @@
 # CONFIG_CPU_FREQ is not set
 # CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -211,6 +213,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -222,12 +225,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -249,6 +254,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -271,6 +277,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -327,6 +334,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -342,8 +350,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -388,6 +397,7 @@
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -429,6 +439,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -445,6 +456,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -563,6 +576,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -586,7 +602,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -600,6 +615,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -630,6 +646,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -652,6 +669,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -722,8 +743,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -760,11 +783,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -774,14 +797,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -837,9 +853,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -870,7 +890,9 @@
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -904,10 +926,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -916,6 +935,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -970,6 +990,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1003,6 +1024,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1010,6 +1033,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1028,6 +1052,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig
index c8f5dec..d85a43c 100644
--- a/arch/powerpc/configs/mpc8272_ads_defconfig
+++ b/arch/powerpc/configs/mpc8272_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:41 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:35 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -44,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -86,6 +86,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -108,7 +109,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -119,13 +119,11 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -141,6 +139,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -183,6 +185,7 @@
 CONFIG_CPM2=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -209,6 +212,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_FLATMEM=y
@@ -216,12 +220,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -246,6 +252,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -268,6 +275,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -349,6 +357,7 @@
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -363,8 +372,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 
 #
@@ -459,6 +469,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -526,9 +542,12 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
-# CONFIG_MDIO_OF_GPIO is not set
+# CONFIG_MDIO_GPIO is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
@@ -573,6 +592,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -595,6 +615,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 CONFIG_PPP=y
@@ -690,6 +714,7 @@
 CONFIG_SERIAL_CPM_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -708,6 +733,11 @@
 # CONFIG_DEBUG_GPIO is not set
 
 #
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
 # I2C GPIO expanders:
 #
 
@@ -725,11 +755,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -739,14 +769,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -843,13 +866,11 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -940,6 +961,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -991,6 +1013,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1000,6 +1023,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1008,10 +1033,12 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1038,11 +1065,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index d582014..45f03ca 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:42 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:36 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -45,7 +45,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -77,12 +77,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -115,7 +115,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -126,7 +125,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -134,11 +132,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -155,6 +151,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -205,6 +205,8 @@
 CONFIG_QE_GPIO=y
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 
 #
 # Kernel options
@@ -232,6 +234,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -243,12 +246,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -275,6 +280,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -297,6 +303,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -353,6 +360,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -368,8 +376,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -390,6 +399,7 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
@@ -472,6 +482,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -503,8 +519,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -547,6 +565,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -563,6 +582,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -682,6 +703,9 @@
 # CONFIG_BROADCOM_PHY is not set
 CONFIG_ICPLUS_PHY=y
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 CONFIG_FIXED_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -722,7 +746,6 @@
 CONFIG_GIANFAR=y
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
-# CONFIG_UGETH_FILTERING is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
@@ -731,6 +754,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -755,6 +779,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -833,8 +861,10 @@
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -902,16 +932,14 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -923,6 +951,11 @@
 # CONFIG_GPIO_SYSFS is not set
 
 #
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
 # I2C GPIO expanders:
 #
 # CONFIG_GPIO_MAX732X is not set
@@ -949,8 +982,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -971,6 +1006,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -1016,11 +1052,11 @@
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -1029,18 +1065,14 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -1093,11 +1125,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -1105,12 +1135,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -1143,6 +1176,7 @@
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
@@ -1161,11 +1195,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 # CONFIG_USB_STORAGE is not set
 # CONFIG_USB_LIBUSUAL is not set
@@ -1206,6 +1240,11 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1237,6 +1276,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1270,10 +1310,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1283,6 +1320,7 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1342,6 +1380,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1373,6 +1412,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1380,6 +1421,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1398,11 +1440,16 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index c87b53a..fb08819 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:43 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:37 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -21,7 +21,9 @@
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -46,7 +48,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -79,12 +81,12 @@
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -97,6 +99,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -119,7 +122,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -131,7 +133,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -139,11 +140,9 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -160,6 +159,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -202,6 +205,7 @@
 CONFIG_FSL_ULI1575=y
 CONFIG_CPM=y
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -240,12 +244,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -271,6 +277,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -294,6 +301,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -382,6 +390,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -398,8 +407,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -449,8 +459,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -494,6 +506,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -510,6 +523,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -629,6 +644,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -675,6 +693,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -699,6 +718,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -792,8 +815,10 @@
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
@@ -860,13 +885,12 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=y
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -881,6 +905,11 @@
 # CONFIG_GPIO_SYSFS is not set
 
 #
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
 # I2C GPIO expanders:
 #
 # CONFIG_GPIO_MAX732X is not set
@@ -901,11 +930,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -915,18 +944,14 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -953,6 +978,7 @@
 CONFIG_MEDIA_TUNER_MT20XX=m
 CONFIG_MEDIA_TUNER_XC2028=m
 CONFIG_MEDIA_TUNER_XC5000=m
+# CONFIG_DVB_DYNAMIC_MINORS is not set
 CONFIG_DVB_CAPTURE_DRIVERS=y
 
 #
@@ -998,6 +1024,12 @@
 # CONFIG_DVB_FE_CUSTOMISE is not set
 
 #
+# Multistandard (satellite) frontends
+#
+# CONFIG_DVB_STB0899 is not set
+# CONFIG_DVB_STB6100 is not set
+
+#
 # DVB-S (satellite) frontends
 #
 # CONFIG_DVB_CX24110 is not set
@@ -1009,8 +1041,10 @@
 # CONFIG_DVB_STV0299 is not set
 # CONFIG_DVB_TDA8083 is not set
 # CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_TDA8261 is not set
 # CONFIG_DVB_VES1X93 is not set
 # CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TUNER_CX24113 is not set
 # CONFIG_DVB_TDA826X is not set
 # CONFIG_DVB_TUA6100 is not set
 # CONFIG_DVB_CX24116 is not set
@@ -1051,11 +1085,17 @@
 # CONFIG_DVB_OR51132 is not set
 # CONFIG_DVB_BCM3510 is not set
 # CONFIG_DVB_LGDT330X is not set
+# CONFIG_DVB_LGDT3304 is not set
 # CONFIG_DVB_S5H1409 is not set
 # CONFIG_DVB_AU8522 is not set
 # CONFIG_DVB_S5H1411 is not set
 
 #
+# ISDB-T (terrestrial) frontends
+#
+# CONFIG_DVB_S921 is not set
+
+#
 # Digital terrestrial only tuners/PLL
 #
 # CONFIG_DVB_PLL is not set
@@ -1108,6 +1148,7 @@
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
 CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
 CONFIG_SND_VERBOSE_PROCFS=y
@@ -1210,11 +1251,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -1222,12 +1261,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -1260,6 +1302,7 @@
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -1286,18 +1329,17 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1345,6 +1387,11 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1389,6 +1436,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1448,7 +1496,9 @@
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1490,10 +1540,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 CONFIG_ADFS_FS=m
 # CONFIG_ADFS_FS_RW is not set
 CONFIG_AFFS_FS=m
@@ -1504,6 +1551,7 @@
 CONFIG_BFS_FS=m
 CONFIG_EFS_FS=m
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1605,6 +1653,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1656,6 +1705,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1665,6 +1715,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1673,11 +1725,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1704,11 +1758,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1742,7 +1800,7 @@
 #
 # Digest
 #
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig
index 8272b1a..1793d08 100644
--- a/arch/powerpc/configs/mpc866_ads_defconfig
+++ b/arch/powerpc/configs/mpc866_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:43 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:38 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_8xx=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -40,7 +41,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -69,12 +70,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -106,7 +107,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -117,13 +117,11 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -140,6 +138,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -185,6 +187,7 @@
 # CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -209,6 +212,7 @@
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -223,12 +227,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -269,6 +275,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -325,6 +332,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -340,8 +348,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -372,6 +381,7 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -407,6 +417,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 CONFIG_FIXED_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -433,6 +446,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -518,7 +535,9 @@
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -549,11 +568,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -563,14 +582,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -623,9 +635,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -657,6 +673,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -690,10 +707,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -702,6 +716,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -758,6 +773,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -790,6 +806,8 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -797,6 +815,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -814,6 +833,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig
index 1736bbc2..adc756e 100644
--- a/arch/powerpc/configs/mpc86xx_defconfig
+++ b/arch/powerpc/configs/mpc86xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:44 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:39 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -41,11 +41,12 @@
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -78,12 +79,12 @@
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -96,6 +97,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -118,7 +120,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -130,7 +131,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -138,12 +138,10 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -160,6 +158,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -199,6 +201,7 @@
 # CONFIG_QUICC_ENGINE is not set
 CONFIG_FSL_ULI1575=y
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -226,6 +229,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 # CONFIG_IRQ_ALL_CPUS is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -238,12 +242,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -269,6 +275,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 CONFIG_HAS_RAPIDIO=y
@@ -292,6 +299,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -380,6 +388,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -396,8 +405,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -420,6 +430,7 @@
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -446,8 +457,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -491,6 +504,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -507,6 +521,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -626,6 +642,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -671,6 +690,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -695,6 +715,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -786,8 +810,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
@@ -826,6 +852,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -852,8 +879,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=y
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -866,18 +893,42 @@
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -886,18 +937,15 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -924,6 +972,7 @@
 CONFIG_MEDIA_TUNER_MT20XX=m
 CONFIG_MEDIA_TUNER_XC2028=m
 CONFIG_MEDIA_TUNER_XC5000=m
+# CONFIG_DVB_DYNAMIC_MINORS is not set
 CONFIG_DVB_CAPTURE_DRIVERS=y
 
 #
@@ -969,6 +1018,12 @@
 # CONFIG_DVB_FE_CUSTOMISE is not set
 
 #
+# Multistandard (satellite) frontends
+#
+# CONFIG_DVB_STB0899 is not set
+# CONFIG_DVB_STB6100 is not set
+
+#
 # DVB-S (satellite) frontends
 #
 # CONFIG_DVB_CX24110 is not set
@@ -980,8 +1035,10 @@
 # CONFIG_DVB_STV0299 is not set
 # CONFIG_DVB_TDA8083 is not set
 # CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_TDA8261 is not set
 # CONFIG_DVB_VES1X93 is not set
 # CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TUNER_CX24113 is not set
 # CONFIG_DVB_TDA826X is not set
 # CONFIG_DVB_TUA6100 is not set
 # CONFIG_DVB_CX24116 is not set
@@ -1022,11 +1079,17 @@
 # CONFIG_DVB_OR51132 is not set
 # CONFIG_DVB_BCM3510 is not set
 # CONFIG_DVB_LGDT330X is not set
+# CONFIG_DVB_LGDT3304 is not set
 # CONFIG_DVB_S5H1409 is not set
 # CONFIG_DVB_AU8522 is not set
 # CONFIG_DVB_S5H1411 is not set
 
 #
+# ISDB-T (terrestrial) frontends
+#
+# CONFIG_DVB_S921 is not set
+
+#
 # Digital terrestrial only tuners/PLL
 #
 # CONFIG_DVB_PLL is not set
@@ -1079,6 +1142,7 @@
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
 CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
 CONFIG_SND_VERBOSE_PROCFS=y
@@ -1181,11 +1245,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -1193,12 +1255,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -1231,6 +1296,7 @@
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_EHCI_FSL is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -1256,18 +1322,17 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1315,6 +1380,11 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1352,6 +1422,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1398,7 +1469,9 @@
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1440,10 +1513,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 CONFIG_ADFS_FS=m
 # CONFIG_ADFS_FS_RW is not set
 CONFIG_AFFS_FS=m
@@ -1454,6 +1524,7 @@
 CONFIG_BFS_FS=m
 CONFIG_EFS_FS=m
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1555,6 +1626,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1606,6 +1678,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1615,6 +1688,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1623,11 +1698,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1654,11 +1731,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1692,7 +1773,7 @@
 #
 # Digest
 #
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig
index a4283b6..4b76321 100644
--- a/arch/powerpc/configs/mpc885_ads_defconfig
+++ b/arch/powerpc/configs/mpc885_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:46 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:41 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_8xx=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -40,7 +41,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -70,12 +71,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -108,7 +109,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -118,13 +118,11 @@
 CONFIG_HAVE_CLK=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -141,6 +139,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -193,6 +195,7 @@
 # CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -212,12 +215,12 @@
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 CONFIG_8XX_MINIMAL_FPEMU=y
 # CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -232,12 +235,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -279,6 +284,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -330,6 +336,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -345,8 +352,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -439,6 +447,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -481,6 +495,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -506,6 +523,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -547,7 +568,9 @@
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -566,11 +589,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -580,14 +603,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -641,6 +657,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
@@ -673,10 +690,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -686,6 +700,7 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -741,6 +756,7 @@
 #
 # Library routines
 #
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -788,6 +804,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -796,6 +813,8 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -804,11 +823,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig
index 199e5f5..4f8681c 100644
--- a/arch/powerpc/configs/pasemi_defconfig
+++ b/arch/powerpc/configs/pasemi_defconfig
@@ -984,7 +984,7 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_SENSORS_EEPROM=y
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig
index de9b1218..5339bb4 100644
--- a/arch/powerpc/configs/pmac32_defconfig
+++ b/arch/powerpc/configs/pmac32_defconfig
@@ -1232,8 +1232,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/ppc40x_defconfig b/arch/powerpc/configs/ppc40x_defconfig
index 4256e2c..326205c 100644
--- a/arch/powerpc/configs/ppc40x_defconfig
+++ b/arch/powerpc/configs/ppc40x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc4
-# Fri Nov 14 09:54:44 2008
+# Linux kernel version: 2.6.29-rc2
+# Fri Jan 23 08:44:03 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_4xx=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -41,7 +42,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -72,12 +73,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -90,6 +91,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -112,7 +114,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -123,7 +124,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -131,11 +131,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -152,6 +150,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
@@ -192,6 +194,7 @@
 # CONFIG_CPU_FREQ is not set
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_OF_RTC=y
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -215,6 +218,7 @@
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -229,12 +233,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -258,6 +264,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -282,6 +289,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -355,6 +363,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -370,8 +379,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -397,6 +407,7 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -469,6 +480,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 CONFIG_MTD_UBI=m
@@ -593,6 +610,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -615,6 +633,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -674,9 +696,12 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -745,13 +770,12 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -803,9 +827,11 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
 
 #
@@ -904,9 +930,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -918,7 +948,6 @@
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -939,7 +968,9 @@
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -976,10 +1007,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1005,6 +1033,7 @@
 CONFIG_UBIFS_FS_ZLIB=y
 # CONFIG_UBIFS_FS_DEBUG is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1084,6 +1113,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=m
 # CONFIG_CRC_T10DIF is not set
@@ -1137,6 +1167,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1146,6 +1177,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1154,11 +1187,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1185,11 +1220,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig
index 034a1fb..5e6d55f 100644
--- a/arch/powerpc/configs/ppc44x_defconfig
+++ b/arch/powerpc/configs/ppc44x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc4
-# Fri Nov 14 10:06:19 2008
+# Linux kernel version: 2.6.29-rc2
+# Fri Jan 23 08:43:46 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -19,6 +19,7 @@
 CONFIG_BOOKE=y
 CONFIG_PTE_64BIT=y
 CONFIG_PHYS_64BIT=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -45,7 +46,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -76,12 +77,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -94,6 +95,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -116,7 +118,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -127,7 +128,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -135,11 +135,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -157,6 +155,10 @@
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_PREEMPT_NOTIFIERS=y
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
@@ -204,6 +206,7 @@
 # CONFIG_CPU_FREQ is not set
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_OF_RTC=y
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -227,6 +230,7 @@
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -241,12 +245,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
 CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -269,6 +275,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -293,6 +300,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -354,10 +362,12 @@
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
 # CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
+CONFIG_LLC=m
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
@@ -366,6 +376,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -378,6 +389,7 @@
 # CONFIG_AF_RXRPC is not set
 # CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -403,6 +415,7 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
@@ -474,6 +487,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 CONFIG_MTD_UBI=m
@@ -631,6 +650,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -655,6 +675,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -722,9 +746,12 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -794,13 +821,12 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -853,9 +879,11 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
 
 #
@@ -972,6 +1000,7 @@
 CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
 CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=m
@@ -1012,7 +1041,6 @@
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1058,6 +1086,11 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1069,7 +1102,6 @@
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -1089,7 +1121,9 @@
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1126,10 +1160,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1155,6 +1186,7 @@
 CONFIG_UBIFS_FS_ZLIB=y
 # CONFIG_UBIFS_FS_DEBUG is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1234,6 +1266,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=m
@@ -1287,6 +1320,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1296,6 +1330,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1304,11 +1340,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1333,11 +1371,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1419,5 +1461,6 @@
 CONFIG_VIRTUALIZATION=y
 CONFIG_KVM=y
 CONFIG_KVM_440=y
+# CONFIG_KVM_EXIT_TIMING is not set
 # CONFIG_VIRTIO_PCI is not set
 # CONFIG_VIRTIO_BALLOON is not set
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 069ae1b..88c6295 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -211,11 +211,28 @@
 CONFIG_PPC_PASEMI_IOMMU=y
 # CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
 CONFIG_PPC_PASEMI_MDIO=y
-# CONFIG_PPC_PS3 is not set
+CONFIG_PPC_PS3=y
+
+#
+# PS3 Platform Options
+#
+# CONFIG_PS3_ADVANCED is not set
+CONFIG_PS3_HTAB_SIZE=20
+# CONFIG_PS3_DYNAMIC_DMA is not set
+CONFIG_PS3_VUART=y
+CONFIG_PS3_PS3AV=y
+CONFIG_PS3_SYS_MANAGER=y
+CONFIG_PS3_STORAGE=m
+CONFIG_PS3_DISK=m
+CONFIG_PS3_ROM=m
+CONFIG_PS3_FLASH=m
+CONFIG_PS3_LPM=m
 CONFIG_PPC_CELL=y
+CONFIG_PPC_CELL_COMMON=y
 CONFIG_PPC_CELL_NATIVE=y
 CONFIG_PPC_IBM_CELL_BLADE=y
 CONFIG_PPC_CELLEB=y
+CONFIG_PPC_CELL_QPACE=y
 
 #
 # Cell Broadband Engine options
@@ -981,6 +998,9 @@
 CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
 CONFIG_SPIDER_NET=m
+CONFIG_GELIC_NET=m
+CONFIG_GELIC_WIRELESS=y
+# CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -1241,8 +1261,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -1370,6 +1390,8 @@
 # CONFIG_FB_PM3 is not set
 # CONFIG_FB_CARMINE is not set
 CONFIG_FB_IBM_GXT4500=y
+CONFIG_FB_PS3=m
+CONFIG_FB_PS3_DEFAULT_SIZE_M=9
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
@@ -1492,6 +1514,8 @@
 CONFIG_SND_PPC=y
 CONFIG_SND_POWERMAC=m
 CONFIG_SND_POWERMAC_AUTO_DRC=y
+CONFIG_SND_PS3=m
+CONFIG_SND_PS3_DEFAULT_START_DELAY=2000
 CONFIG_SND_AOA=m
 CONFIG_SND_AOA_FABRIC_LAYOUT=m
 CONFIG_SND_AOA_ONYX=m
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
index 01f05ec..7d044df 100644
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -1801,8 +1801,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_AT24=m
-CONFIG_SENSORS_EEPROM=m
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_LEGACY=m
 CONFIG_SENSORS_PCF8574=m
 CONFIG_PCF8575=m
 CONFIG_SENSORS_PCA9539=m
diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig
index 228099d..fdded96 100644
--- a/arch/powerpc/configs/pq2fads_defconfig
+++ b/arch/powerpc/configs/pq2fads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:47 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:42 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -44,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -87,6 +87,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -109,7 +110,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -120,13 +120,11 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -142,6 +140,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -183,6 +185,7 @@
 CONFIG_CPM2=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -209,6 +212,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_FLATMEM=y
@@ -216,12 +220,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -247,6 +253,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -269,6 +276,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -350,6 +358,7 @@
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -364,8 +373,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 
 #
@@ -460,6 +470,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -520,6 +536,7 @@
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -577,9 +594,12 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
-# CONFIG_MDIO_OF_GPIO is not set
+# CONFIG_MDIO_GPIO is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
@@ -624,6 +644,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -646,6 +667,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 CONFIG_PPP=y
@@ -743,6 +768,7 @@
 CONFIG_SERIAL_CPM_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -761,6 +787,11 @@
 # CONFIG_DEBUG_GPIO is not set
 
 #
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
 # I2C GPIO expanders:
 #
 
@@ -778,11 +809,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -792,14 +823,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -844,7 +868,7 @@
 # CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG is not set
@@ -859,10 +883,12 @@
 # CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
 CONFIG_USB_GADGET_M66592=y
 CONFIG_USB_M66592=y
 # CONFIG_USB_GADGET_AMD5536UDC is not set
 # CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
@@ -876,6 +902,11 @@
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
 # CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -938,13 +969,11 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1035,6 +1064,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1086,6 +1116,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1095,6 +1126,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1103,10 +1136,12 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1133,11 +1168,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig
index 6046dc0..e971db1 100644
--- a/arch/powerpc/configs/prpmc2800_defconfig
+++ b/arch/powerpc/configs/prpmc2800_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:48 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:44 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -45,7 +45,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +75,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -118,7 +118,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -128,13 +127,11 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -151,6 +148,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -190,6 +191,7 @@
 # CONFIG_CPU_FREQ is not set
 # CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -213,10 +215,12 @@
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -228,12 +232,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -255,6 +261,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -279,6 +286,8 @@
 #
 # Networking options
 #
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -335,6 +344,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -350,8 +360,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -445,6 +456,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -475,8 +492,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -489,7 +508,6 @@
 # CONFIG_IDE_GD_ATAPI is not set
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -519,6 +537,7 @@
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -571,6 +590,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -587,6 +607,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -707,6 +729,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -730,7 +755,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -744,6 +768,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -773,6 +798,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -797,6 +823,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -877,8 +907,10 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -943,8 +975,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -970,8 +1002,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -992,6 +1026,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -1018,11 +1053,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -1031,18 +1066,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -1101,11 +1131,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -1113,12 +1141,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
 CONFIG_THRUSTMASTER_FF=y
 CONFIG_ZEROPLUS_FF=y
 CONFIG_USB_SUPPORT=y
@@ -1148,6 +1179,7 @@
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -1170,11 +1202,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 # CONFIG_USB_STORAGE is not set
 # CONFIG_USB_LIBUSUAL is not set
@@ -1216,6 +1248,10 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1253,6 +1289,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1299,7 +1336,9 @@
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1333,10 +1372,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1346,6 +1382,7 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1400,6 +1437,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1433,6 +1471,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1440,6 +1480,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1458,6 +1499,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 1e520ab..61b1008 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -1055,8 +1055,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index b3f5671..86512c8 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:48 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:46 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -43,7 +43,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -73,12 +73,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -110,7 +110,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -120,7 +119,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -128,11 +126,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -149,6 +145,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -191,6 +191,7 @@
 # CONFIG_TAU is not set
 # CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -217,6 +218,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -228,12 +230,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -257,6 +261,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -279,6 +284,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=m
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -330,6 +336,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -345,8 +352,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -367,6 +375,7 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_OF_PARTS is not set
@@ -416,9 +425,7 @@
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xFF800000
-CONFIG_MTD_PHYSMAP_LEN=0x00800000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_PHYSMAP_OF is not set
 # CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
@@ -442,6 +449,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -468,8 +481,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -483,7 +498,6 @@
 # CONFIG_IDE_GD_ATAPI is not set
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -512,6 +526,7 @@
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -582,6 +597,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -672,6 +689,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -729,8 +750,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
 CONFIG_NVRAM=y
@@ -795,8 +818,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -816,11 +839,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -829,18 +852,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -903,6 +921,7 @@
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_EHCI_FSL is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -925,18 +944,17 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -983,6 +1001,10 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1020,6 +1042,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1070,7 +1093,9 @@
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
 # CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1104,10 +1129,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1127,6 +1149,7 @@
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1204,6 +1227,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1239,6 +1263,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1246,6 +1272,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/include/asm/Kbuild b/arch/powerpc/include/asm/Kbuild
index 9268602..5ab7d7f 100644
--- a/arch/powerpc/include/asm/Kbuild
+++ b/arch/powerpc/include/asm/Kbuild
@@ -35,4 +35,3 @@
 unifdef-y += termios.h
 unifdef-y += types.h
 unifdef-y += unistd.h
-unifdef-y += swab.h
diff --git a/arch/powerpc/include/asm/byteorder.h b/arch/powerpc/include/asm/byteorder.h
index 5cca27a..aa6cc4f 100644
--- a/arch/powerpc/include/asm/byteorder.h
+++ b/arch/powerpc/include/asm/byteorder.h
@@ -7,8 +7,6 @@
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  */
-
-#include <asm/swab.h>
 #include <linux/byteorder/big_endian.h>
 
 #endif /* _ASM_POWERPC_BYTEORDER_H */
diff --git a/arch/powerpc/include/asm/ps3.h b/arch/powerpc/include/asm/ps3.h
index eead5c6..67f1812 100644
--- a/arch/powerpc/include/asm/ps3.h
+++ b/arch/powerpc/include/asm/ps3.h
@@ -103,10 +103,10 @@
 	int (*map)(struct ps3_dma_region *,
 		   unsigned long virt_addr,
 		   unsigned long len,
-		   unsigned long *bus_addr,
+		   dma_addr_t *bus_addr,
 		   u64 iopte_pp);
 	int (*unmap)(struct ps3_dma_region *,
-		     unsigned long bus_addr,
+		     dma_addr_t bus_addr,
 		     unsigned long len);
 };
 /**
@@ -124,9 +124,9 @@
 int ps3_dma_region_create(struct ps3_dma_region *r);
 int ps3_dma_region_free(struct ps3_dma_region *r);
 int ps3_dma_map(struct ps3_dma_region *r, unsigned long virt_addr,
-	unsigned long len, unsigned long *bus_addr,
+	unsigned long len, dma_addr_t *bus_addr,
 	u64 iopte_pp);
-int ps3_dma_unmap(struct ps3_dma_region *r, unsigned long bus_addr,
+int ps3_dma_unmap(struct ps3_dma_region *r, dma_addr_t bus_addr,
 	unsigned long len);
 
 /* mmio routines */
diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h
index a0a1531..2701753 100644
--- a/arch/powerpc/include/asm/qe.h
+++ b/arch/powerpc/include/asm/qe.h
@@ -624,7 +624,7 @@
 #define UCC_GETH_UCCE_RXF1      0x00000002
 #define UCC_GETH_UCCE_RXF0      0x00000001
 
-/* UPSMR, when used as a UART */
+/* UCC Protocol Specific Mode Register (UPSMR), when used for UART */
 #define UCC_UART_UPSMR_FLC		0x8000
 #define UCC_UART_UPSMR_SL		0x4000
 #define UCC_UART_UPSMR_CL_MASK		0x3000
@@ -652,6 +652,23 @@
 #define UCC_UART_UPSMR_TPM_EVEN		0x0002
 #define UCC_UART_UPSMR_TPM_HIGH		0x0003
 
+/* UCC Protocol Specific Mode Register (UPSMR), when used for Ethernet */
+#define UCC_GETH_UPSMR_FTFE     0x80000000
+#define UCC_GETH_UPSMR_PTPE     0x40000000
+#define UCC_GETH_UPSMR_ECM      0x04000000
+#define UCC_GETH_UPSMR_HSE      0x02000000
+#define UCC_GETH_UPSMR_PRO      0x00400000
+#define UCC_GETH_UPSMR_CAP      0x00200000
+#define UCC_GETH_UPSMR_RSH      0x00100000
+#define UCC_GETH_UPSMR_RPM      0x00080000
+#define UCC_GETH_UPSMR_R10M     0x00040000
+#define UCC_GETH_UPSMR_RLPB     0x00020000
+#define UCC_GETH_UPSMR_TBIM     0x00010000
+#define UCC_GETH_UPSMR_RES1     0x00002000
+#define UCC_GETH_UPSMR_RMM      0x00001000
+#define UCC_GETH_UPSMR_CAM      0x00000400
+#define UCC_GETH_UPSMR_BRO      0x00000200
+
 /* UCC Transmit On Demand Register (UTODR) */
 #define UCC_SLOW_TOD	0x8000
 #define UCC_FAST_TOD	0x8000
diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
index e0175be..0aa0315 100644
--- a/arch/powerpc/include/asm/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
@@ -18,7 +18,7 @@
  */
 
 #define RTAS_UNKNOWN_SERVICE (-1)
-#define RTAS_INSTANTIATE_MAX (1UL<<30) /* Don't instantiate rtas at/above this value */
+#define RTAS_INSTANTIATE_MAX (1ULL<<30) /* Don't instantiate rtas at/above this value */
 
 /* Buffer size for ppc_rtas system call. */
 #define RTAS_RMOBUF_MAX (64 * 1024)
diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h
index 803def23..72353f6 100644
--- a/arch/powerpc/include/asm/systbl.h
+++ b/arch/powerpc/include/asm/systbl.h
@@ -92,7 +92,7 @@
 SYSCALL(uselib)
 SYSCALL(swapon)
 SYSCALL(reboot)
-SYSX(sys_ni_syscall,compat_sys_old_readdir,old_readdir)
+SYSX(sys_ni_syscall,compat_sys_old_readdir,sys_old_readdir)
 SYSCALL_SPU(mmap)
 SYSCALL_SPU(munmap)
 SYSCALL_SPU(truncate)
diff --git a/arch/powerpc/include/asm/types.h b/arch/powerpc/include/asm/types.h
index c004c13..7ce27a5 100644
--- a/arch/powerpc/include/asm/types.h
+++ b/arch/powerpc/include/asm/types.h
@@ -1,7 +1,12 @@
 #ifndef _ASM_POWERPC_TYPES_H
 #define _ASM_POWERPC_TYPES_H
 
-#ifdef __powerpc64__
+/*
+ * This is here because we used to use l64 for 64bit powerpc
+ * and we don't want to impact user mode with our change to ll64
+ * in the kernel.
+ */
+#if defined(__powerpc64__) && !defined(__KERNEL__)
 # include <asm-generic/int-l64.h>
 #else
 # include <asm-generic/int-ll64.h>
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 9937fe4..19ee491 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -56,6 +56,10 @@
 #include "head_booke.h"
 #endif
 
+#if defined(CONFIG_FSL_BOOKE)
+#include "../mm/mmu_decl.h"
+#endif
+
 int main(void)
 {
 	DEFINE(THREAD, offsetof(struct task_struct, thread));
@@ -382,6 +386,9 @@
 	DEFINE(PGD_T_LOG2, PGD_T_LOG2);
 	DEFINE(PTE_T_LOG2, PTE_T_LOG2);
 #endif
+#ifdef CONFIG_FSL_BOOKE
+	DEFINE(TLBCAM_SIZE, sizeof(struct tlbcam));
+#endif
 
 #ifdef CONFIG_KVM_EXIT_TIMING
 	DEFINE(VCPU_TIMING_EXIT_TBU, offsetof(struct kvm_vcpu,
diff --git a/arch/powerpc/kernel/cacheinfo.c b/arch/powerpc/kernel/cacheinfo.c
index b33f041..bb37b1d 100644
--- a/arch/powerpc/kernel/cacheinfo.c
+++ b/arch/powerpc/kernel/cacheinfo.c
@@ -113,7 +113,7 @@
 	struct cache *next_local;      /* next cache of >= level */
 };
 
-static DEFINE_PER_CPU(struct cache_dir *, cache_dir);
+static DEFINE_PER_CPU(struct cache_dir *, cache_dir_pcpu);
 
 /* traversal/modification of this list occurs only at cpu hotplug time;
  * access is serialized by cpu hotplug locking
@@ -468,9 +468,9 @@
 
 	cache_dir->kobj = kobj;
 
-	WARN_ON_ONCE(per_cpu(cache_dir, cpu_id) != NULL);
+	WARN_ON_ONCE(per_cpu(cache_dir_pcpu, cpu_id) != NULL);
 
-	per_cpu(cache_dir, cpu_id) = cache_dir;
+	per_cpu(cache_dir_pcpu, cpu_id) = cache_dir;
 
 	return cache_dir;
 err:
@@ -820,13 +820,13 @@
 
 	/* Prevent userspace from seeing inconsistent state - remove
 	 * the sysfs hierarchy first */
-	cache_dir = per_cpu(cache_dir, cpu_id);
+	cache_dir = per_cpu(cache_dir_pcpu, cpu_id);
 
 	/* careful, sysfs population may have failed */
 	if (cache_dir)
 		remove_cache_dir(cache_dir);
 
-	per_cpu(cache_dir, cpu_id) = NULL;
+	per_cpu(cache_dir_pcpu, cpu_id) = NULL;
 
 	/* clear the CPU's bit in its cache chain, possibly freeing
 	 * cache objects */
diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c
index 14183af..2983ada 100644
--- a/arch/powerpc/kernel/dma-iommu.c
+++ b/arch/powerpc/kernel/dma-iommu.c
@@ -79,10 +79,10 @@
 		       "Warning: IOMMU offset too big for device mask\n");
 		if (tbl)
 			printk(KERN_INFO
-			       "mask: 0x%08lx, table offset: 0x%08lx\n",
+			       "mask: 0x%08llx, table offset: 0x%08lx\n",
 				mask, tbl->it_offset);
 		else
-			printk(KERN_INFO "mask: 0x%08lx, table unavailable\n",
+			printk(KERN_INFO "mask: 0x%08llx, table unavailable\n",
 				mask);
 		return 0;
 	} else
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index b4bcf5a..ebaedaf 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -1518,6 +1518,15 @@
 	/* turn on 64-bit mode */
 	bl	.enable_64b_mode
 
+	li	r0,0
+	mfspr	r3,SPRN_HID4
+	rldimi	r3,r0,40,23	/* clear bit 23 (rm_ci) */
+	sync
+	mtspr	SPRN_HID4,r3
+	isync
+	sync
+	slbia
+
 	/* get TOC pointer (real address) */
 	bl	.relative_toc
 
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 11b549ac..36ffb35 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -389,10 +389,6 @@
 #endif
 #endif
 
-	mfspr	r3,SPRN_TLB1CFG
-	andi.	r3,r3,0xfff
-	lis	r4,num_tlbcam_entries@ha
-	stw	r3,num_tlbcam_entries@l(r4)
 /*
  * Decide what sort of machine this is and initialize the MMU.
  */
@@ -711,7 +707,7 @@
 	EXCEPTION(0x2060, PerformanceMonitor, performance_monitor_exception, EXC_XFER_STD)
 
 #ifdef CONFIG_PPC_E500MC
-	EXCEPTION(0x2070, Doorbell, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x2070, Doorbell, unknown_exception, EXC_XFER_STD)
 #endif
 
 	/* Debug Interrupt */
@@ -909,7 +905,7 @@
 _GLOBAL(loadcam_entry)
 	lis	r4,TLBCAM@ha
 	addi	r4,r4,TLBCAM@l
-	mulli	r5,r3,20
+	mulli	r5,r3,TLBCAM_SIZE
 	add	r3,r5,r4
 	lwz	r4,0(r3)
 	mtspr	SPRN_MAS0,r4
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index 1bfa706b..fd51578 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -239,12 +239,12 @@
 		if (printk_ratelimit()) {
 			printk(KERN_INFO "iommu_free: invalid entry\n");
 			printk(KERN_INFO "\tentry     = 0x%lx\n", entry); 
-			printk(KERN_INFO "\tdma_addr  = 0x%lx\n", (u64)dma_addr);
-			printk(KERN_INFO "\tTable     = 0x%lx\n", (u64)tbl);
-			printk(KERN_INFO "\tbus#      = 0x%lx\n", (u64)tbl->it_busno);
-			printk(KERN_INFO "\tsize      = 0x%lx\n", (u64)tbl->it_size);
-			printk(KERN_INFO "\tstartOff  = 0x%lx\n", (u64)tbl->it_offset);
-			printk(KERN_INFO "\tindex     = 0x%lx\n", (u64)tbl->it_index);
+			printk(KERN_INFO "\tdma_addr  = 0x%llx\n", (u64)dma_addr);
+			printk(KERN_INFO "\tTable     = 0x%llx\n", (u64)tbl);
+			printk(KERN_INFO "\tbus#      = 0x%llx\n", (u64)tbl->it_busno);
+			printk(KERN_INFO "\tsize      = 0x%llx\n", (u64)tbl->it_size);
+			printk(KERN_INFO "\tstartOff  = 0x%llx\n", (u64)tbl->it_offset);
+			printk(KERN_INFO "\tindex     = 0x%llx\n", (u64)tbl->it_index);
 			WARN_ON(1);
 		}
 		return;
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index d051e8c..182e0f6 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -240,7 +240,7 @@
 	if (rc)
 		return;
 
-	seq_printf(m, "partition_entitled_capacity=%ld\n",
+	seq_printf(m, "partition_entitled_capacity=%lld\n",
 	           ppp_data.entitlement);
 	seq_printf(m, "group=%d\n", ppp_data.group_num);
 	seq_printf(m, "system_active_processors=%d\n",
@@ -265,7 +265,7 @@
 		   ppp_data.unallocated_weight);
 	seq_printf(m, "capacity_weight=%d\n", ppp_data.weight);
 	seq_printf(m, "capped=%d\n", ppp_data.capped);
-	seq_printf(m, "unallocated_capacity=%ld\n",
+	seq_printf(m, "unallocated_capacity=%lld\n",
 		   ppp_data.unallocated_entitlement);
 }
 
@@ -509,10 +509,10 @@
 	} else
 		return -EINVAL;
 
-	pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
+	pr_debug("%s: current_entitled = %llu, current_weight = %u\n",
 		 __func__, ppp_data.entitlement, ppp_data.weight);
 
-	pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
+	pr_debug("%s: new_entitled = %llu, new_weight = %u\n",
 		 __func__, new_entitled, new_weight);
 
 	retval = plpar_hcall_norets(H_SET_PPP, new_entitled, new_weight);
@@ -558,7 +558,7 @@
 	pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
 	         __func__, mpp_data.entitled_mem, mpp_data.mem_weight);
 
-	pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
+	pr_debug("%s: new_entitled = %llu, new_weight = %u\n",
 		 __func__, new_entitled, new_weight);
 
 	rc = plpar_hcall_norets(H_SET_MPP, new_entitled, new_weight);
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index b3abebb..d59e2b1 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -93,10 +93,35 @@
 				KDUMP_KERNELBASE);
 
 	crashk_res.start = KDUMP_KERNELBASE;
+#else
+	if (!crashk_res.start) {
+		/*
+		 * unspecified address, choose a region of specified size
+		 * can overlap with initrd (ignoring corruption when retained)
+		 * ppc64 requires kernel and some stacks to be in first segemnt
+		 */
+		crashk_res.start = KDUMP_KERNELBASE;
+	}
+
+	crash_base = PAGE_ALIGN(crashk_res.start);
+	if (crash_base != crashk_res.start) {
+		printk("Crash kernel base must be aligned to 0x%lx\n",
+				PAGE_SIZE);
+		crashk_res.start = crash_base;
+	}
+
 #endif
 	crash_size = PAGE_ALIGN(crash_size);
 	crashk_res.end = crashk_res.start + crash_size - 1;
 
+	/* The crash region must not overlap the current kernel */
+	if (overlaps_crashkernel(__pa(_stext), _end - _stext)) {
+		printk(KERN_WARNING
+			"Crash kernel can not overlap current kernel\n");
+		crashk_res.start = crashk_res.end = 0;
+		return;
+	}
+
 	/* Crash kernel trumps memory limit */
 	if (memory_limit && memory_limit <= crashk_res.end) {
 		memory_limit = crashk_res.end + 1;
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 586962f..ea8eda8 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -470,7 +470,7 @@
 	if (bus->self) {
 		pr_debug("IO mapping for PCI-PCI bridge %s\n",
 			 pci_name(bus->self));
-		pr_debug("  virt=0x%016lx...0x%016lx\n",
+		pr_debug("  virt=0x%016llx...0x%016llx\n",
 			 bus->resource[0]->start + _IO_BASE,
 			 bus->resource[0]->end + _IO_BASE);
 		return 0;
@@ -502,7 +502,7 @@
 					      hose->io_base_phys - phys_page);
 
 	pr_debug("IO mapping for PHB %s\n", hose->dn->full_name);
-	pr_debug("  phys=0x%016lx, virt=0x%p (alloc=0x%p)\n",
+	pr_debug("  phys=0x%016llx, virt=0x%p (alloc=0x%p)\n",
 		 hose->io_base_phys, hose->io_base_virt, hose->io_base_alloc);
 	pr_debug("  size=0x%016lx (alloc=0x%016lx)\n",
 		 hose->pci_io_size, size_page);
@@ -517,7 +517,7 @@
 	hose->io_resource.start += io_virt_offset;
 	hose->io_resource.end += io_virt_offset;
 
-	pr_debug("  hose->io_resource=0x%016lx...0x%016lx\n",
+	pr_debug("  hose->io_resource=0x%016llx...0x%016llx\n",
 		 hose->io_resource.start, hose->io_resource.end);
 
 	return 0;
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index c09cffa..f00f831 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -590,6 +590,11 @@
 {
 	u32 *slb_size_ptr;
 
+	slb_size_ptr = of_get_flat_dt_prop(node, "slb-size", NULL);
+	if (slb_size_ptr != NULL) {
+		mmu_slb_size = *slb_size_ptr;
+		return;
+	}
 	slb_size_ptr = of_get_flat_dt_prop(node, "ibm,slb-size", NULL);
 	if (slb_size_ptr != NULL) {
 		mmu_slb_size = *slb_size_ptr;
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index d8bd216..2d34196 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -434,8 +434,8 @@
 	printk("Starting Linux PPC64 %s\n", init_utsname()->version);
 
 	printk("-----------------------------------------------------\n");
-	printk("ppc64_pft_size                = 0x%lx\n", ppc64_pft_size);
-	printk("physicalMemorySize            = 0x%lx\n", lmb_phys_mem_size());
+	printk("ppc64_pft_size                = 0x%llx\n", ppc64_pft_size);
+	printk("physicalMemorySize            = 0x%llx\n", lmb_phys_mem_size());
 	if (ppc64_caches.dline_size != 0x80)
 		printk("ppc64_caches.dcache_line_size = 0x%x\n",
 		       ppc64_caches.dline_size);
@@ -493,7 +493,7 @@
 	 * bringup, we need to get at them in real mode. This means they
 	 * must also be within the RMO region.
 	 */
-	limit = min(0x10000000UL, lmb.rmo_size);
+	limit = min(0x10000000ULL, lmb.rmo_size);
 
 	for_each_possible_cpu(i) {
 		unsigned long sp;
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index 94aa7b0..d369449 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -492,14 +492,14 @@
 	struct vio_dev *viodev = to_vio_dev(dev);
 	void *ret;
 
-	if (vio_cmo_alloc(viodev, roundup(size, IOMMU_PAGE_SIZE))) {
+	if (vio_cmo_alloc(viodev, roundup(size, PAGE_SIZE))) {
 		atomic_inc(&viodev->cmo.allocs_failed);
 		return NULL;
 	}
 
 	ret = dma_iommu_ops.alloc_coherent(dev, size, dma_handle, flag);
 	if (unlikely(ret == NULL)) {
-		vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE));
+		vio_cmo_dealloc(viodev, roundup(size, PAGE_SIZE));
 		atomic_inc(&viodev->cmo.allocs_failed);
 	}
 
@@ -513,7 +513,7 @@
 
 	dma_iommu_ops.free_coherent(dev, size, vaddr, dma_handle);
 
-	vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE));
+	vio_cmo_dealloc(viodev, roundup(size, PAGE_SIZE));
 }
 
 static dma_addr_t vio_dma_iommu_map_page(struct device *dev, struct page *page,
@@ -572,6 +572,7 @@
 	if (unlikely(!ret)) {
 		vio_cmo_dealloc(viodev, alloc_size);
 		atomic_inc(&viodev->cmo.allocs_failed);
+		return ret;
 	}
 
 	for (sgl = sglist, count = 0; count < ret; count++, sgl++)
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 47bf15c..161b9b9 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -87,7 +87,9 @@
 	/* The dummy segment contents for the bug workaround mentioned above
 	   near PHDRS.  */
 	.dummy : AT(ADDR(.dummy) - LOAD_OFFSET) {
-		LONG(0xf177)
+		LONG(0)
+		LONG(0)
+		LONG(0)
 	} :kernel :dummy
 
 /*
diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c
index 23cee39..1971e4ee3 100644
--- a/arch/powerpc/mm/fsl_booke_mmu.c
+++ b/arch/powerpc/mm/fsl_booke_mmu.c
@@ -56,18 +56,11 @@
 
 extern void loadcam_entry(unsigned int index);
 unsigned int tlbcam_index;
-unsigned int num_tlbcam_entries;
 static unsigned long __cam0, __cam1, __cam2;
 
 #define NUM_TLBCAMS	(16)
 
-struct tlbcam {
-   	u32	MAS0;
-	u32	MAS1;
-	u32	MAS2;
-	u32	MAS3;
-	u32	MAS7;
-} TLBCAM[NUM_TLBCAMS];
+struct tlbcam TLBCAM[NUM_TLBCAMS];
 
 struct tlbcamrange {
    	unsigned long start;
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index ad123bc..d1f9c62 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -75,6 +75,15 @@
 #endif /* CONFIG_PPC_MMU_NOHASH */
 
 #ifdef CONFIG_PPC32
+
+struct tlbcam {
+	u32	MAS0;
+	u32	MAS1;
+	u32	MAS2;
+	u32	MAS3;
+	u32	MAS7;
+};
+
 extern void mapin_ram(void);
 extern int map_page(unsigned long va, phys_addr_t pa, int flags);
 extern void setbat(int index, unsigned long virt, phys_addr_t phys,
@@ -90,8 +99,6 @@
 struct hash_pte;
 extern struct hash_pte *Hash, *Hash_end;
 extern unsigned long Hash_size, Hash_mask;
-
-extern unsigned int num_tlbcam_entries;
 #endif
 
 extern unsigned long ioremap_bot;
diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c
index 45d9253..fe65c40 100644
--- a/arch/powerpc/mm/ppc_mmu_32.c
+++ b/arch/powerpc/mm/ppc_mmu_32.c
@@ -123,9 +123,9 @@
 	int wimgxpp;
 	struct ppc_bat *bat = BATS[index];
 
-	if (((flags & _PAGE_NO_CACHE) == 0) &&
-	    cpu_has_feature(CPU_FTR_NEED_COHERENT))
-		flags |= _PAGE_COHERENT;
+	if ((flags & _PAGE_NO_CACHE) ||
+	    (cpu_has_feature(CPU_FTR_NEED_COHERENT) == 0))
+		flags &= ~_PAGE_COHERENT;
 
 	bl = (size >> 17) - 1;
 	if (PVR_VER(mfspr(SPRN_PVR)) != 1) {
diff --git a/arch/powerpc/mm/slice.c b/arch/powerpc/mm/slice.c
index db44e02..ba51948 100644
--- a/arch/powerpc/mm/slice.c
+++ b/arch/powerpc/mm/slice.c
@@ -710,9 +710,18 @@
 			   unsigned long len)
 {
 	struct slice_mask mask, available;
+	unsigned int psize = mm->context.user_psize;
 
 	mask = slice_range_to_mask(addr, len);
-	available = slice_mask_for_size(mm, mm->context.user_psize);
+	available = slice_mask_for_size(mm, psize);
+#ifdef CONFIG_PPC_64K_PAGES
+	/* We need to account for 4k slices too */
+	if (psize == MMU_PAGE_64K) {
+		struct slice_mask compat_mask;
+		compat_mask = slice_mask_for_size(mm, MMU_PAGE_4K);
+		or_mask(available, compat_mask);
+	}
+#endif
 
 #if 0 /* too verbose */
 	slice_dbg("is_hugepage_only_range(mm=%p, addr=%lx, len=%lx)\n",
diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c
index 60e6032..98cd1dc 100644
--- a/arch/powerpc/mm/stab.c
+++ b/arch/powerpc/mm/stab.c
@@ -251,8 +251,8 @@
 
 		paca[cpu].stab_addr = newstab;
 		paca[cpu].stab_real = virt_to_abs(newstab);
-		printk(KERN_INFO "Segment table for CPU %d at 0x%lx "
-		       "virtual, 0x%lx absolute\n",
+		printk(KERN_INFO "Segment table for CPU %d at 0x%llx "
+		       "virtual, 0x%llx absolute\n",
 		       cpu, paca[cpu].stab_addr, paca[cpu].stab_real);
 	}
 }
diff --git a/arch/powerpc/oprofile/op_model_pa6t.c b/arch/powerpc/oprofile/op_model_pa6t.c
index c40de46..42f778df 100644
--- a/arch/powerpc/oprofile/op_model_pa6t.c
+++ b/arch/powerpc/oprofile/op_model_pa6t.c
@@ -132,7 +132,7 @@
 	for (pmc = 0; pmc < cur_cpu_spec->num_pmcs; pmc++) {
 		/* counters are 40 bit. Move to cputable at some point? */
 		reset_value[pmc] = (0x1UL << 39) - ctr[pmc].count;
-		pr_debug("reset_value for pmc%u inited to 0x%lx\n",
+		pr_debug("reset_value for pmc%u inited to 0x%llx\n",
 				 pmc, reset_value[pmc]);
 	}
 
@@ -177,7 +177,7 @@
 
 	oprofile_running = 1;
 
-	pr_debug("start on cpu %d, mmcr0 %lx\n", smp_processor_id(), mmcr0);
+	pr_debug("start on cpu %d, mmcr0 %llx\n", smp_processor_id(), mmcr0);
 
 	return 0;
 }
@@ -193,7 +193,7 @@
 
 	oprofile_running = 0;
 
-	pr_debug("stop on cpu %d, mmcr0 %lx\n", smp_processor_id(), mmcr0);
+	pr_debug("stop on cpu %d, mmcr0 %llx\n", smp_processor_id(), mmcr0);
 }
 
 /* handle the perfmon overflow vector */
diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index 6981331..01f51da 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -3,5 +3,4 @@
 obj-$(CONFIG_EBONY)	+= ebony.o
 obj-$(CONFIG_SAM440EP) 	+= sam440ep.o
 obj-$(CONFIG_WARP)	+= warp.o
-obj-$(CONFIG_WARP)	+= warp-nand.o
 obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
diff --git a/arch/powerpc/platforms/44x/warp-nand.c b/arch/powerpc/platforms/44x/warp-nand.c
deleted file mode 100644
index 89ecd76..0000000
--- a/arch/powerpc/platforms/44x/warp-nand.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * PIKA Warp(tm) NAND flash specific routines
- *
- * Copyright (c) 2008 PIKA Technologies
- *   Sean MacLennan <smaclennan@pikatech.com>
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/ndfc.h>
-#include <linux/of.h>
-#include <asm/machdep.h>
-
-
-#ifdef CONFIG_MTD_NAND_NDFC
-
-#define CS_NAND_0	1	/* use chip select 1 for NAND device 0 */
-
-#define WARP_NAND_FLASH_REG_ADDR	0xD0000000UL
-#define WARP_NAND_FLASH_REG_SIZE	0x2000
-
-static struct resource warp_ndfc = {
-	.start = WARP_NAND_FLASH_REG_ADDR,
-	.end   = WARP_NAND_FLASH_REG_ADDR + WARP_NAND_FLASH_REG_SIZE - 1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct mtd_partition nand_parts[] = {
-	{
-		.name   = "kernel",
-		.offset = 0,
-		.size   = 0x0200000
-	},
-	{
-		.name   = "root",
-		.offset = 0x0200000,
-		.size   = 0x3E00000
-	},
-	{
-		.name   = "persistent",
-		.offset = 0x4000000,
-		.size   = 0x4000000
-	},
-	{
-		.name   = "persistent1",
-		.offset = 0x8000000,
-		.size   = 0x4000000
-	},
-	{
-		.name   = "persistent2",
-		.offset = 0xC000000,
-		.size   = 0x4000000
-	}
-};
-
-struct ndfc_controller_settings warp_ndfc_settings = {
-	.ccr_settings = (NDFC_CCR_BS(CS_NAND_0) | NDFC_CCR_ARAC1),
-	.ndfc_erpn = 0,
-};
-
-static struct ndfc_chip_settings warp_chip0_settings = {
-	.bank_settings = 0x80002222,
-};
-
-struct platform_nand_ctrl warp_nand_ctrl = {
-	.priv = &warp_ndfc_settings,
-};
-
-static struct platform_device warp_ndfc_device = {
-	.name = "ndfc-nand",
-	.id = 0,
-	.dev = {
-		.platform_data = &warp_nand_ctrl,
-	},
-	.num_resources = 1,
-	.resource = &warp_ndfc,
-};
-
-/* Do NOT set the ecclayout: let it default so it is correct for both
- * 64M and 256M flash chips.
- */
-static struct platform_nand_chip warp_nand_chip0 = {
-	.nr_chips = 1,
-	.chip_offset = CS_NAND_0,
-	.nr_partitions = ARRAY_SIZE(nand_parts),
-	.partitions = nand_parts,
-	.chip_delay = 20,
-	.priv = &warp_chip0_settings,
-};
-
-static struct platform_device warp_nand_device = {
-	.name = "ndfc-chip",
-	.id = 0,
-	.num_resources = 0,
-	.dev = {
-		.platform_data = &warp_nand_chip0,
-		.parent = &warp_ndfc_device.dev,
-	}
-};
-
-static int warp_setup_nand_flash(void)
-{
-	struct device_node *np;
-
-	/* Try to detect a rev A based on NOR size. */
-	np = of_find_compatible_node(NULL, NULL, "cfi-flash");
-	if (np) {
-		struct property *pp;
-
-		pp = of_find_property(np, "reg", NULL);
-		if (pp && (pp->length == 12)) {
-			u32 *v = pp->value;
-			if (v[2] == 0x4000000) {
-				/* Rev A = 64M NAND */
-				warp_nand_chip0.nr_partitions = 3;
-
-				nand_parts[1].size   = 0x3000000;
-				nand_parts[2].offset = 0x3200000;
-				nand_parts[2].size   = 0x0e00000;
-			}
-		}
-		of_node_put(np);
-	}
-
-	platform_device_register(&warp_ndfc_device);
-	platform_device_register(&warp_nand_device);
-
-	return 0;
-}
-machine_device_initcall(warp, warp_setup_nand_flash);
-
-#endif
diff --git a/arch/powerpc/platforms/512x/clock.c b/arch/powerpc/platforms/512x/clock.c
index f416014..1bcff94 100644
--- a/arch/powerpc/platforms/512x/clock.c
+++ b/arch/powerpc/platforms/512x/clock.c
@@ -56,12 +56,12 @@
 	int dev_match = 0;
 	int id_match = 0;
 
-	if (dev == NULL && id == NULL)
+	if (dev == NULL || id == NULL)
 		return NULL;
 
 	mutex_lock(&clocks_mutex);
 	list_for_each_entry(p, &clocks, node) {
-		if (dev && dev == p->dev)
+		if (dev == p->dev)
 			dev_match++;
 		if (strcmp(id, p->name) == 0)
 			id_match++;
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c
index 8a455eb..07f89ae 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c
@@ -363,11 +363,8 @@
 {
 	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
 	struct mpc52xx_gpt __iomem *regs = mm_gc->regs;
-	unsigned int ret;
 
 	return (in_be32(&regs->status) & (1 << (31 - 23))) ? 1 : 0;
-
-	return ret;
 }
 
 static void
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pic.c b/arch/powerpc/platforms/52xx/mpc52xx_pic.c
index 72865e8..0a093f0 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pic.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pic.c
@@ -196,6 +196,7 @@
 
 static int mpc52xx_extirq_set_type(unsigned int virq, unsigned int flow_type)
 {
+	struct irq_desc *desc = get_irq_desc(virq);
 	u32 ctrl_reg, type;
 	int irq;
 	int l2irq;
@@ -222,6 +223,11 @@
 		type = 0;
 	}
 
+	desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
+	desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
+	if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
+		desc->status |= IRQ_LEVEL;
+
 	ctrl_reg = in_be32(&intr->ctrl);
 	ctrl_reg &= ~(0x3 << (22 - (l2irq * 2)));
 	ctrl_reg |= (type << (22 - (l2irq * 2)));
@@ -231,7 +237,7 @@
 }
 
 static struct irq_chip mpc52xx_extirq_irqchip = {
-	.typename = " MPC52xx IRQ[0-3] ",
+	.typename = "MPC52xx External",
 	.mask = mpc52xx_extirq_mask,
 	.unmask = mpc52xx_extirq_unmask,
 	.ack = mpc52xx_extirq_ack,
diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile
index ba5028e..051777c 100644
--- a/arch/powerpc/platforms/83xx/Makefile
+++ b/arch/powerpc/platforms/83xx/Makefile
@@ -3,6 +3,7 @@
 #
 obj-y				:= misc.o usb.o
 obj-$(CONFIG_SUSPEND)		+= suspend.o suspend-asm.o
+obj-$(CONFIG_MCU_MPC8349EMITX)	+= mcu_mpc8349emitx.o
 obj-$(CONFIG_MPC831x_RDB)	+= mpc831x_rdb.o
 obj-$(CONFIG_MPC832x_RDB)	+= mpc832x_rdb.o
 obj-$(CONFIG_MPC834x_MDS)	+= mpc834x_mds.o
diff --git a/drivers/i2c/chips/mcu_mpc8349emitx.c b/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c
similarity index 100%
rename from drivers/i2c/chips/mcu_mpc8349emitx.c
rename to arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c
diff --git a/arch/powerpc/platforms/83xx/mpc831x_rdb.c b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
index 5177bdd..91a2c80 100644
--- a/arch/powerpc/platforms/83xx/mpc831x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
@@ -71,6 +71,7 @@
 
 static struct of_device_id __initdata of_bus_ids[] = {
 	{ .compatible = "simple-bus" },
+	{ .compatible = "gianfar" },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 47fe2be..200b9cb 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -323,4 +323,15 @@
 	  chip-selects, Ethernet/USB PHY's power and various other small
 	  on-board peripherals.
 
+config MCU_MPC8349EMITX
+	tristate "MPC8349E-mITX MCU driver"
+	depends on I2C && PPC_83xx
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Say Y here to enable soft power-off functionality on the Freescale
+	  boards with the MPC8349E-mITX-compatible MCU chips. This driver will
+	  also register MCU GPIOs with the generic GPIO API, so you'll able
+	  to use MCU pins as GPIOs.
+
 endmenu
diff --git a/arch/powerpc/platforms/cell/beat_interrupt.c b/arch/powerpc/platforms/cell/beat_interrupt.c
index 192a935..7225484 100644
--- a/arch/powerpc/platforms/cell/beat_interrupt.c
+++ b/arch/powerpc/platforms/cell/beat_interrupt.c
@@ -99,7 +99,7 @@
 	err = beat_downcount_of_interrupt(irq_plug);
 	if (err != 0) {
 		if ((err & 0xFFFFFFFF) != 0xFFFFFFF5) /* -11: wrong state */
-			panic("Failed to downcount IRQ! Error = %16lx", err);
+			panic("Failed to downcount IRQ! Error = %16llx", err);
 
 		printk(KERN_ERR "IRQ over-downcounted, plug %d\n", irq_plug);
 	}
diff --git a/arch/powerpc/platforms/cell/celleb_scc_epci.c b/arch/powerpc/platforms/cell/celleb_scc_epci.c
index 08c285b..48ec88a 100644
--- a/arch/powerpc/platforms/cell/celleb_scc_epci.c
+++ b/arch/powerpc/platforms/cell/celleb_scc_epci.c
@@ -405,7 +405,7 @@
 	hose->cfg_addr = ioremap(r.start, (r.end - r.start + 1));
 	if (!hose->cfg_addr)
 		goto error;
-	pr_debug("EPCI: cfg_addr map 0x%016lx->0x%016lx + 0x%016lx\n",
+	pr_debug("EPCI: cfg_addr map 0x%016llx->0x%016lx + 0x%016llx\n",
 		 r.start, (unsigned long)hose->cfg_addr, (r.end - r.start + 1));
 
 	if (of_address_to_resource(node, 2, &r))
@@ -413,7 +413,7 @@
 	hose->cfg_data = ioremap(r.start, (r.end - r.start + 1));
 	if (!hose->cfg_data)
 		goto error;
-	pr_debug("EPCI: cfg_data map 0x%016lx->0x%016lx + 0x%016lx\n",
+	pr_debug("EPCI: cfg_data map 0x%016llx->0x%016lx + 0x%016llx\n",
 		 r.start, (unsigned long)hose->cfg_data, (r.end - r.start + 1));
 
 	hose->ops = &celleb_epci_ops;
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 88d94b5..ee5033e 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -855,7 +855,7 @@
 	 */
 	if (np && size < lmb_end_of_DRAM()) {
 		printk(KERN_WARNING "iommu: force-enabled, dma window"
-		       " (%ldMB) smaller than total memory (%ldMB)\n",
+		       " (%ldMB) smaller than total memory (%lldMB)\n",
 		       size >> 20, lmb_end_of_DRAM() >> 20);
 		return -ENODEV;
 	}
@@ -985,7 +985,7 @@
 	addr = cell_iommu_get_fixed_address(dev) + dma_iommu_fixed_base;
 	archdata->dma_data = (void *)addr;
 
-	dev_dbg(dev, "iommu: fixed addr = %lx\n", addr);
+	dev_dbg(dev, "iommu: fixed addr = %llx\n", addr);
 }
 
 static void insert_16M_pte(unsigned long addr, unsigned long *ptab,
diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c
index 7b4cefa..5f961c4 100644
--- a/arch/powerpc/platforms/cell/ras.c
+++ b/arch/powerpc/platforms/cell/ras.c
@@ -38,16 +38,16 @@
 	/* Todo: do some nicer parsing of bits and based on them go down
 	 * to other sub-units FIRs and not only IIC
 	 */
-	printk(KERN_ERR "Global Checkstop FIR    : 0x%016lx\n",
+	printk(KERN_ERR "Global Checkstop FIR    : 0x%016llx\n",
 	       in_be64(&pregs->checkstop_fir));
-	printk(KERN_ERR "Global Recoverable FIR  : 0x%016lx\n",
+	printk(KERN_ERR "Global Recoverable FIR  : 0x%016llx\n",
 	       in_be64(&pregs->checkstop_fir));
-	printk(KERN_ERR "Global MachineCheck FIR : 0x%016lx\n",
+	printk(KERN_ERR "Global MachineCheck FIR : 0x%016llx\n",
 	       in_be64(&pregs->spec_att_mchk_fir));
 
 	if (iregs == NULL)
 		return;
-	printk(KERN_ERR "IOC FIR                 : 0x%016lx\n",
+	printk(KERN_ERR "IOC FIR                 : 0x%016llx\n",
 	       in_be64(&iregs->ioc_fir));
 
 }
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index a5bdb89..e487ad6 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -151,7 +151,7 @@
 {
 	struct spu_priv2 __iomem *priv2 = spu->priv2;
 
-	pr_debug("%s: adding SLB[%d] 0x%016lx 0x%016lx\n",
+	pr_debug("%s: adding SLB[%d] 0x%016llx 0x%016llx\n",
 			__func__, slbe, slb->vsid, slb->esid);
 
 	out_be64(&priv2->slb_index_W, slbe);
@@ -221,7 +221,7 @@
 {
 	int ret;
 
-	pr_debug("%s, %lx, %lx\n", __func__, dsisr, ea);
+	pr_debug("%s, %llx, %lx\n", __func__, dsisr, ea);
 
 	/*
 	 * Handle kernel space hash faults immediately. User hash
diff --git a/arch/powerpc/platforms/cell/spu_callbacks.c b/arch/powerpc/platforms/cell/spu_callbacks.c
index 19f6bfd..fec1495e 100644
--- a/arch/powerpc/platforms/cell/spu_callbacks.c
+++ b/arch/powerpc/platforms/cell/spu_callbacks.c
@@ -54,7 +54,7 @@
 	long (*syscall)(u64 a1, u64 a2, u64 a3, u64 a4, u64 a5, u64 a6);
 
 	if (s->nr_ret >= ARRAY_SIZE(spu_syscall_table)) {
-		pr_debug("%s: invalid syscall #%ld", __func__, s->nr_ret);
+		pr_debug("%s: invalid syscall #%lld", __func__, s->nr_ret);
 		return -ENOSYS;
 	}
 
diff --git a/arch/powerpc/platforms/cell/spufs/coredump.c b/arch/powerpc/platforms/cell/spufs/coredump.c
index af116aa..c4d4a19 100644
--- a/arch/powerpc/platforms/cell/spufs/coredump.c
+++ b/arch/powerpc/platforms/cell/spufs/coredump.c
@@ -42,7 +42,7 @@
 		return spufs_coredump_read[num].read(ctx, buffer, size, off);
 
 	data = spufs_coredump_read[num].get(ctx);
-	ret = snprintf(buffer, size, "0x%.16lx", data);
+	ret = snprintf(buffer, size, "0x%.16llx", data);
 	if (ret >= size)
 		return size;
 	return ++ret; /* count trailing NULL */
diff --git a/arch/powerpc/platforms/cell/spufs/fault.c b/arch/powerpc/platforms/cell/spufs/fault.c
index f093a58..a4dd3ae 100644
--- a/arch/powerpc/platforms/cell/spufs/fault.c
+++ b/arch/powerpc/platforms/cell/spufs/fault.c
@@ -132,7 +132,7 @@
 
 	spuctx_switch_state(ctx, SPU_UTIL_IOWAIT);
 
-	pr_debug("ctx %p: ea %016lx, dsisr %016lx state %d\n", ctx, ea,
+	pr_debug("ctx %p: ea %016llx, dsisr %016llx state %d\n", ctx, ea,
 		dsisr, ctx->state);
 
 	ctx->stats.hash_flt++;
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index 7106b63..0da7f2b 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -1654,7 +1654,7 @@
 
 static int spufs_check_valid_dma(struct mfc_dma_command *cmd)
 {
-	pr_debug("queueing DMA %x %lx %x %x %x\n", cmd->lsa,
+	pr_debug("queueing DMA %x %llx %x %x %x\n", cmd->lsa,
 		 cmd->ea, cmd->size, cmd->tag, cmd->cmd);
 
 	switch (cmd->cmd) {
@@ -1671,7 +1671,7 @@
 	}
 
 	if ((cmd->lsa & 0xf) != (cmd->ea &0xf)) {
-		pr_debug("invalid DMA alignment, ea %lx lsa %x\n",
+		pr_debug("invalid DMA alignment, ea %llx lsa %x\n",
 				cmd->ea, cmd->lsa);
 		return -EIO;
 	}
@@ -2633,7 +2633,7 @@
 	}
 
 	seq_printf(s, "%c flgs(%lx) sflgs(%lx) pri(%d) ts(%d) spu(%02d)"
-		" %c %lx %lx %lx %lx %x %x\n",
+		" %c %llx %llx %llx %llx %x %x\n",
 		ctx->state == SPU_STATE_SAVED ? 'S' : 'R',
 		ctx->flags,
 		ctx->sched_flags,
diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c
index 8c61996..1db6b9e 100644
--- a/arch/powerpc/platforms/fsl_uli1575.c
+++ b/arch/powerpc/platforms/fsl_uli1575.c
@@ -249,6 +249,7 @@
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5249, quirk_final_uli5249);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x1575, quirk_final_uli1575);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
 
 static void __devinit hpcd_quirk_uli1575(struct pci_dev *dev)
 {
diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c
index bbe828f..6ed75bf 100644
--- a/arch/powerpc/platforms/iseries/iommu.c
+++ b/arch/powerpc/platforms/iseries/iommu.c
@@ -66,7 +66,7 @@
 
 		rc = HvCallXm_setTce((u64)tbl->it_index, (u64)index, tce);
 		if (rc)
-			panic("PCI_DMA: HvCallXm_setTce failed, Rc: 0x%lx\n",
+			panic("PCI_DMA: HvCallXm_setTce failed, Rc: 0x%llx\n",
 					rc);
 		index++;
 		uaddr += TCE_PAGE_SIZE;
@@ -81,7 +81,7 @@
 	while (npages--) {
 		rc = HvCallXm_setTce((u64)tbl->it_index, (u64)index, 0);
 		if (rc)
-			panic("PCI_DMA: HvCallXm_setTce failed, Rc: 0x%lx\n",
+			panic("PCI_DMA: HvCallXm_setTce failed, Rc: 0x%llx\n",
 					rc);
 		index++;
 	}
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index 6b0711c..bd8817b 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -53,7 +53,7 @@
 #include <asm/pmac_low_i2c.h>
 #include <asm/pmac_pfunc.h>
 
-#define DEBUG
+#undef DEBUG
 
 #ifdef DEBUG
 #define DBG(fmt...) udbg_printf(fmt)
diff --git a/arch/powerpc/platforms/ps3/device-init.c b/arch/powerpc/platforms/ps3/device-init.c
index ca71a12..bb028f1 100644
--- a/arch/powerpc/platforms/ps3/device-init.c
+++ b/arch/powerpc/platforms/ps3/device-init.c
@@ -82,7 +82,7 @@
 		goto fail_rights;
 	}
 
-	pr_debug("%s:%d: pu_id %lu, rights %lu(%lxh)\n",
+	pr_debug("%s:%d: pu_id %llu, rights %llu(%llxh)\n",
 		__func__, __LINE__, dev->lpm.pu_id, dev->lpm.rights,
 		dev->lpm.rights);
 
@@ -348,7 +348,7 @@
 		return -ENODEV;
 	}
 
-	pr_debug("%s:%u: (%u:%u:%u): port %lu blk_size %lu num_blocks %lu "
+	pr_debug("%s:%u: (%u:%u:%u): port %llu blk_size %llu num_blocks %llu "
 		 "num_regions %u\n", __func__, __LINE__, repo->bus_index,
 		 repo->dev_index, repo->dev_type, port, blk_size, num_blocks,
 		 num_regions);
@@ -394,7 +394,7 @@
 			result = -ENODEV;
 			goto fail_read_region;
 		}
-		pr_debug("%s:%u: region %u: id %u start %lu size %lu\n",
+		pr_debug("%s:%u: region %u: id %u start %llu size %llu\n",
 			 __func__, __LINE__, i, id, start, size);
 
 		p->regions[i].id = id;
@@ -662,13 +662,13 @@
 		if (rem)
 			break;
 	}
-	pr_warning("%s:%u: device %lu:%lu not found\n", __func__, __LINE__,
+	pr_warning("%s:%u: device %llu:%llu not found\n", __func__, __LINE__,
 		   bus_id, dev_id);
 	return;
 
 found:
 	if (retries)
-		pr_debug("%s:%u: device %lu:%lu found after %u retries\n",
+		pr_debug("%s:%u: device %llu:%llu found after %u retries\n",
 			 __func__, __LINE__, bus_id, dev_id, retries);
 
 	ps3_setup_dynamic_device(&repo);
@@ -715,14 +715,14 @@
 	res = lv1_storage_get_async_status(PS3_NOTIFICATION_DEV_ID, &tag,
 					   &status);
 	if (tag != dev->tag)
-		pr_err("%s:%u: tag mismatch, got %lx, expected %lx\n",
+		pr_err("%s:%u: tag mismatch, got %llx, expected %llx\n",
 		       __func__, __LINE__, tag, dev->tag);
 
 	if (res) {
-		pr_err("%s:%u: res %d status 0x%lx\n", __func__, __LINE__, res,
+		pr_err("%s:%u: res %d status 0x%llx\n", __func__, __LINE__, res,
 		       status);
 	} else {
-		pr_debug("%s:%u: completed, status 0x%lx\n", __func__,
+		pr_debug("%s:%u: completed, status 0x%llx\n", __func__,
 			 __LINE__, status);
 		dev->lv1_status = status;
 		complete(&dev->done);
@@ -761,7 +761,7 @@
 	}
 
 	if (dev->lv1_status) {
-		pr_err("%s:%u: %s not completed, status 0x%lx\n", __func__,
+		pr_err("%s:%u: %s not completed, status 0x%llx\n", __func__,
 		       __LINE__, op, dev->lv1_status);
 		return -EIO;
 	}
@@ -850,16 +850,16 @@
 		if (res)
 			break;
 
-		pr_debug("%s:%u: notify event type 0x%lx bus id %lu dev id %lu"
-			 " type %lu port %lu\n", __func__, __LINE__,
+		pr_debug("%s:%u: notify event type 0x%llx bus id %llu dev id %llu"
+			 " type %llu port %llu\n", __func__, __LINE__,
 			 notify_event->event_type, notify_event->bus_id,
 			 notify_event->dev_id, notify_event->dev_type,
 			 notify_event->dev_port);
 
 		if (notify_event->event_type != notify_region_probe ||
 		    notify_event->bus_id != dev.sbd.bus_id) {
-			pr_warning("%s:%u: bad notify_event: event %lu, "
-				   "dev_id %lu, dev_type %lu\n",
+			pr_warning("%s:%u: bad notify_event: event %llu, "
+				   "dev_id %llu, dev_type %llu\n",
 				   __func__, __LINE__, notify_event->event_type,
 				   notify_event->dev_id,
 				   notify_event->dev_type);
diff --git a/arch/powerpc/platforms/ps3/htab.c b/arch/powerpc/platforms/ps3/htab.c
index 6eb1d4d..1e8a1e3 100644
--- a/arch/powerpc/platforms/ps3/htab.c
+++ b/arch/powerpc/platforms/ps3/htab.c
@@ -75,7 +75,7 @@
 
 	if (result) {
 		/* all entries bolted !*/
-		pr_info("%s:result=%d va=%lx pa=%lx ix=%lx v=%lx r=%lx\n",
+		pr_info("%s:result=%d va=%lx pa=%lx ix=%lx v=%llx r=%llx\n",
 			__func__, result, va, pa, hpte_group, hpte_v, hpte_r);
 		BUG();
 	}
diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c
index e59634f..8ec5ccf 100644
--- a/arch/powerpc/platforms/ps3/interrupt.c
+++ b/arch/powerpc/platforms/ps3/interrupt.c
@@ -60,6 +60,8 @@
  * gives a usable range of plug values of  {NUM_ISA_INTERRUPTS..63}.  Note
  * that there is no constraint on how many in this set an individual thread
  * can acquire.
+ *
+ * The mask is declared as unsigned long so we can use set/clear_bit on it.
  */
 
 #define PS3_BMP_MINALIGN 64
@@ -68,7 +70,7 @@
 	struct {
 		u64 status;
 		u64 unused_1[3];
-		u64 mask;
+		unsigned long mask;
 		u64 unused_2[3];
 	};
 	u64 ipi_debug_brk_mask;
@@ -102,7 +104,7 @@
 	struct ps3_private *pd = get_irq_chip_data(virq);
 	unsigned long flags;
 
-	pr_debug("%s:%d: thread_id %lu, virq %d\n", __func__, __LINE__,
+	pr_debug("%s:%d: thread_id %llu, virq %d\n", __func__, __LINE__,
 		pd->thread_id, virq);
 
 	local_irq_save(flags);
@@ -123,7 +125,7 @@
 	struct ps3_private *pd = get_irq_chip_data(virq);
 	unsigned long flags;
 
-	pr_debug("%s:%d: thread_id %lu, virq %d\n", __func__, __LINE__,
+	pr_debug("%s:%d: thread_id %llu, virq %d\n", __func__, __LINE__,
 		pd->thread_id, virq);
 
 	local_irq_save(flags);
@@ -221,7 +223,7 @@
 {
 	const struct ps3_private *pd = get_irq_chip_data(virq);
 
-	pr_debug("%s:%d: ppe_id %lu, thread_id %lu, virq %u\n", __func__,
+	pr_debug("%s:%d: ppe_id %llu, thread_id %llu, virq %u\n", __func__,
 		__LINE__, pd->ppe_id, pd->thread_id, virq);
 
 	set_irq_chip_data(virq, NULL);
@@ -291,7 +293,7 @@
 	int result;
 	const struct ps3_private *pd = get_irq_chip_data(virq);
 
-	pr_debug("%s:%d: ppe_id %lu, thread_id %lu, virq %u\n", __func__,
+	pr_debug("%s:%d: ppe_id %llu, thread_id %llu, virq %u\n", __func__,
 		__LINE__, pd->ppe_id, pd->thread_id, virq);
 
 	ps3_chip_mask(virq);
@@ -322,7 +324,7 @@
 int ps3_event_receive_port_setup(enum ps3_cpu_binding cpu, unsigned int *virq)
 {
 	int result;
-	unsigned long outlet;
+	u64 outlet;
 
 	result = lv1_construct_event_receive_port(&outlet);
 
@@ -468,7 +470,7 @@
 	unsigned int *virq)
 {
 	int result;
-	unsigned long outlet;
+	u64 outlet;
 
 	result = lv1_construct_io_irq_outlet(interrupt_id, &outlet);
 
@@ -525,7 +527,7 @@
 	unsigned int *virq)
 {
 	int result;
-	unsigned long outlet;
+	u64 outlet;
 	u64 lpar_addr;
 
 	BUG_ON(!is_kernel_addr((u64)virt_addr_bmp));
@@ -581,7 +583,7 @@
 	unsigned int class, unsigned int *virq)
 {
 	int result;
-	unsigned long outlet;
+	u64 outlet;
 
 	BUG_ON(class > 2);
 
@@ -691,7 +693,7 @@
 
 	pd->bmp.ipi_debug_brk_mask = 0x8000000000000000UL >> virq;
 
-	pr_debug("%s:%d: cpu %u, virq %u, mask %lxh\n", __func__, __LINE__,
+	pr_debug("%s:%d: cpu %u, virq %u, mask %llxh\n", __func__, __LINE__,
 		cpu, virq, pd->bmp.ipi_debug_brk_mask);
 }
 
@@ -710,7 +712,7 @@
 	plug &= 0x3f;
 
 	if (unlikely(plug == NO_IRQ)) {
-		pr_debug("%s:%d: no plug found: thread_id %lu\n", __func__,
+		pr_debug("%s:%d: no plug found: thread_id %llu\n", __func__,
 			__LINE__, pd->thread_id);
 		dump_bmp(&per_cpu(ps3_private, 0));
 		dump_bmp(&per_cpu(ps3_private, 1));
@@ -745,7 +747,7 @@
 		pd->thread_id = get_hard_smp_processor_id(cpu);
 		spin_lock_init(&pd->bmp.lock);
 
-		pr_debug("%s:%d: ppe_id %lu, thread_id %lu, bmp %lxh\n",
+		pr_debug("%s:%d: ppe_id %llu, thread_id %llu, bmp %lxh\n",
 			__func__, __LINE__, pd->ppe_id, pd->thread_id,
 			ps3_mm_phys_to_lpar(__pa(&pd->bmp)));
 
@@ -770,6 +772,6 @@
 	lv1_get_logical_ppe_id(&ppe_id);
 	result = lv1_configure_irq_state_bitmap(ppe_id, thread_id, 0);
 
-	DBG("%s:%d: lv1_configure_irq_state_bitmap (%lu:%lu/%d) %s\n", __func__,
+	DBG("%s:%d: lv1_configure_irq_state_bitmap (%llu:%llu/%d) %s\n", __func__,
 		__LINE__, ppe_id, thread_id, cpu, ps3_result(result));
 }
diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c
index a4d49dd..67de6bf3 100644
--- a/arch/powerpc/platforms/ps3/mm.c
+++ b/arch/powerpc/platforms/ps3/mm.c
@@ -79,8 +79,8 @@
  */
 
 struct mem_region {
-	unsigned long base;
-	unsigned long size;
+	u64 base;
+	u64 size;
 	unsigned long offset;
 };
 
@@ -103,9 +103,9 @@
  */
 
 struct map {
-	unsigned long total;
-	unsigned long vas_id;
-	unsigned long htab_size;
+	u64 total;
+	u64 vas_id;
+	u64 htab_size;
 	struct mem_region rm;
 	struct mem_region r1;
 };
@@ -114,13 +114,13 @@
 static void __maybe_unused _debug_dump_map(const struct map *m,
 	const char *func, int line)
 {
-	DBG("%s:%d: map.total     = %lxh\n", func, line, m->total);
-	DBG("%s:%d: map.rm.size   = %lxh\n", func, line, m->rm.size);
-	DBG("%s:%d: map.vas_id    = %lu\n", func, line, m->vas_id);
-	DBG("%s:%d: map.htab_size = %lxh\n", func, line, m->htab_size);
-	DBG("%s:%d: map.r1.base   = %lxh\n", func, line, m->r1.base);
+	DBG("%s:%d: map.total     = %llxh\n", func, line, m->total);
+	DBG("%s:%d: map.rm.size   = %llxh\n", func, line, m->rm.size);
+	DBG("%s:%d: map.vas_id    = %llu\n", func, line, m->vas_id);
+	DBG("%s:%d: map.htab_size = %llxh\n", func, line, m->htab_size);
+	DBG("%s:%d: map.r1.base   = %llxh\n", func, line, m->r1.base);
 	DBG("%s:%d: map.r1.offset = %lxh\n", func, line, m->r1.offset);
-	DBG("%s:%d: map.r1.size   = %lxh\n", func, line, m->r1.size);
+	DBG("%s:%d: map.r1.size   = %llxh\n", func, line, m->r1.size);
 }
 
 static struct map map;
@@ -146,11 +146,11 @@
 void __init ps3_mm_vas_create(unsigned long* htab_size)
 {
 	int result;
-	unsigned long start_address;
-	unsigned long size;
-	unsigned long access_right;
-	unsigned long max_page_size;
-	unsigned long flags;
+	u64 start_address;
+	u64 size;
+	u64 access_right;
+	u64 max_page_size;
+	u64 flags;
 
 	result = lv1_query_logical_partition_address_region_info(0,
 		&start_address, &size, &access_right, &max_page_size,
@@ -164,7 +164,7 @@
 	}
 
 	if (max_page_size < PAGE_SHIFT_16M) {
-		DBG("%s:%d: bad max_page_size %lxh\n", __func__, __LINE__,
+		DBG("%s:%d: bad max_page_size %llxh\n", __func__, __LINE__,
 			max_page_size);
 		goto fail;
 	}
@@ -208,7 +208,7 @@
 {
 	int result;
 
-	DBG("%s:%d: map.vas_id    = %lu\n", __func__, __LINE__, map.vas_id);
+	DBG("%s:%d: map.vas_id    = %llu\n", __func__, __LINE__, map.vas_id);
 
 	if (map.vas_id) {
 		result = lv1_select_virtual_address_space(0);
@@ -235,15 +235,14 @@
 static int ps3_mm_region_create(struct mem_region *r, unsigned long size)
 {
 	int result;
-	unsigned long muid;
+	u64 muid;
 
 	r->size = _ALIGN_DOWN(size, 1 << PAGE_SHIFT_16M);
 
 	DBG("%s:%d requested  %lxh\n", __func__, __LINE__, size);
-	DBG("%s:%d actual     %lxh\n", __func__, __LINE__, r->size);
-	DBG("%s:%d difference %lxh (%luMB)\n", __func__, __LINE__,
-		(unsigned long)(size - r->size),
-		(size - r->size) / 1024 / 1024);
+	DBG("%s:%d actual     %llxh\n", __func__, __LINE__, r->size);
+	DBG("%s:%d difference %llxh (%lluMB)\n", __func__, __LINE__,
+		size - r->size, (size - r->size) / 1024 / 1024);
 
 	if (r->size == 0) {
 		DBG("%s:%d: size == 0\n", __func__, __LINE__);
@@ -277,7 +276,7 @@
 {
 	int result;
 
-	DBG("%s:%d: r->base = %lxh\n", __func__, __LINE__, r->base);
+	DBG("%s:%d: r->base = %llxh\n", __func__, __LINE__, r->base);
 	if (r->base) {
 		result = lv1_release_memory(r->base);
 		BUG_ON(result);
@@ -355,7 +354,7 @@
 static void  __maybe_unused _dma_dump_region(const struct ps3_dma_region *r,
 	const char *func, int line)
 {
-	DBG("%s:%d: dev        %lu:%lu\n", func, line, r->dev->bus_id,
+	DBG("%s:%d: dev        %llu:%llu\n", func, line, r->dev->bus_id,
 		r->dev->dev_id);
 	DBG("%s:%d: page_size  %u\n", func, line, r->page_size);
 	DBG("%s:%d: bus_addr   %lxh\n", func, line, r->bus_addr);
@@ -390,7 +389,7 @@
 static void _dma_dump_chunk (const struct dma_chunk* c, const char* func,
 	int line)
 {
-	DBG("%s:%d: r.dev        %lu:%lu\n", func, line,
+	DBG("%s:%d: r.dev        %llu:%llu\n", func, line,
 		c->region->dev->bus_id, c->region->dev->dev_id);
 	DBG("%s:%d: r.bus_addr   %lxh\n", func, line, c->region->bus_addr);
 	DBG("%s:%d: r.page_size  %u\n", func, line, c->region->page_size);
@@ -596,7 +595,7 @@
 
 	/* build ioptes for the area */
 	pages = len >> r->page_size;
-	DBG("%s: pgsize=%#x len=%#lx pages=%#x iopteflag=%#lx\n", __func__,
+	DBG("%s: pgsize=%#x len=%#lx pages=%#x iopteflag=%#llx\n", __func__,
 	    r->page_size, r->len, pages, iopte_flag);
 	for (iopage = 0; iopage < pages; iopage++) {
 		offset = (1 << r->page_size) * iopage;
@@ -648,13 +647,14 @@
 static int dma_sb_region_create(struct ps3_dma_region *r)
 {
 	int result;
+	u64 bus_addr;
 
 	DBG(" -> %s:%d:\n", __func__, __LINE__);
 
 	BUG_ON(!r);
 
 	if (!r->dev->bus_id) {
-		pr_info("%s:%d: %lu:%lu no dma\n", __func__, __LINE__,
+		pr_info("%s:%d: %llu:%llu no dma\n", __func__, __LINE__,
 			r->dev->bus_id, r->dev->dev_id);
 		return 0;
 	}
@@ -671,7 +671,8 @@
 
 	result = lv1_allocate_device_dma_region(r->dev->bus_id, r->dev->dev_id,
 		roundup_pow_of_two(r->len), r->page_size, r->region_type,
-		&r->bus_addr);
+		&bus_addr);
+	r->bus_addr = bus_addr;
 
 	if (result) {
 		DBG("%s:%d: lv1_allocate_device_dma_region failed: %s\n",
@@ -685,6 +686,7 @@
 static int dma_ioc0_region_create(struct ps3_dma_region *r)
 {
 	int result;
+	u64 bus_addr;
 
 	INIT_LIST_HEAD(&r->chunk_list.head);
 	spin_lock_init(&r->chunk_list.lock);
@@ -692,7 +694,8 @@
 	result = lv1_allocate_io_segment(0,
 					 r->len,
 					 r->page_size,
-					 &r->bus_addr);
+					 &bus_addr);
+	r->bus_addr = bus_addr;
 	if (result) {
 		DBG("%s:%d: lv1_allocate_io_segment failed: %s\n",
 			__func__, __LINE__, ps3_result(result));
@@ -720,7 +723,7 @@
 	BUG_ON(!r);
 
 	if (!r->dev->bus_id) {
-		pr_info("%s:%d: %lu:%lu no dma\n", __func__, __LINE__,
+		pr_info("%s:%d: %llu:%llu no dma\n", __func__, __LINE__,
 			r->dev->bus_id, r->dev->dev_id);
 		return 0;
 	}
@@ -777,7 +780,7 @@
  */
 
 static int dma_sb_map_area(struct ps3_dma_region *r, unsigned long virt_addr,
-	   unsigned long len, unsigned long *bus_addr,
+	   unsigned long len, dma_addr_t *bus_addr,
 	   u64 iopte_flag)
 {
 	int result;
@@ -800,7 +803,7 @@
 		DBG("%s:%d lpar_addr %lxh\n", __func__, __LINE__,
 			lpar_addr);
 		DBG("%s:%d len       %lxh\n", __func__, __LINE__, len);
-		DBG("%s:%d bus_addr  %lxh (%lxh)\n", __func__, __LINE__,
+		DBG("%s:%d bus_addr  %llxh (%lxh)\n", __func__, __LINE__,
 		*bus_addr, len);
 	}
 
@@ -832,7 +835,7 @@
 }
 
 static int dma_ioc0_map_area(struct ps3_dma_region *r, unsigned long virt_addr,
-	     unsigned long len, unsigned long *bus_addr,
+	     unsigned long len, dma_addr_t *bus_addr,
 	     u64 iopte_flag)
 {
 	int result;
@@ -872,7 +875,7 @@
 		return result;
 	}
 	*bus_addr = c->bus_addr + phys_addr - aligned_phys;
-	DBG("%s: va=%#lx pa=%#lx a_pa=%#lx bus=%#lx\n", __func__,
+	DBG("%s: va=%#lx pa=%#lx a_pa=%#lx bus=%#llx\n", __func__,
 	    virt_addr, phys_addr, aligned_phys, *bus_addr);
 	c->usage_count = 1;
 
@@ -889,7 +892,7 @@
  * This is the common dma unmap routine.
  */
 
-static int dma_sb_unmap_area(struct ps3_dma_region *r, unsigned long bus_addr,
+static int dma_sb_unmap_area(struct ps3_dma_region *r, dma_addr_t bus_addr,
 	unsigned long len)
 {
 	unsigned long flags;
@@ -903,7 +906,7 @@
 			1 << r->page_size);
 		unsigned long aligned_len = _ALIGN_UP(len + bus_addr
 			- aligned_bus, 1 << r->page_size);
-		DBG("%s:%d: not found: bus_addr %lxh\n",
+		DBG("%s:%d: not found: bus_addr %llxh\n",
 			__func__, __LINE__, bus_addr);
 		DBG("%s:%d: not found: len %lxh\n",
 			__func__, __LINE__, len);
@@ -926,12 +929,12 @@
 }
 
 static int dma_ioc0_unmap_area(struct ps3_dma_region *r,
-			unsigned long bus_addr, unsigned long len)
+			dma_addr_t bus_addr, unsigned long len)
 {
 	unsigned long flags;
 	struct dma_chunk *c;
 
-	DBG("%s: start a=%#lx l=%#lx\n", __func__, bus_addr, len);
+	DBG("%s: start a=%#llx l=%#lx\n", __func__, bus_addr, len);
 	spin_lock_irqsave(&r->chunk_list.lock, flags);
 	c = dma_find_chunk(r, bus_addr, len);
 
@@ -941,7 +944,7 @@
 		unsigned long aligned_len = _ALIGN_UP(len + bus_addr
 						      - aligned_bus,
 						      1 << r->page_size);
-		DBG("%s:%d: not found: bus_addr %lxh\n",
+		DBG("%s:%d: not found: bus_addr %llxh\n",
 		    __func__, __LINE__, bus_addr);
 		DBG("%s:%d: not found: len %lxh\n",
 		    __func__, __LINE__, len);
@@ -975,7 +978,8 @@
 static int dma_sb_region_create_linear(struct ps3_dma_region *r)
 {
 	int result;
-	unsigned long virt_addr, len, tmp;
+	unsigned long virt_addr, len;
+	dma_addr_t tmp;
 
 	if (r->len > 16*1024*1024) {	/* FIXME: need proper fix */
 		/* force 16M dma pages for linear mapping */
@@ -1027,7 +1031,8 @@
 static int dma_sb_region_free_linear(struct ps3_dma_region *r)
 {
 	int result;
-	unsigned long bus_addr, len, lpar_addr;
+	dma_addr_t bus_addr;
+	unsigned long len, lpar_addr;
 
 	if (r->offset < map.rm.size) {
 		/* Unmap (part of) 1st RAM chunk */
@@ -1072,7 +1077,7 @@
  */
 
 static int dma_sb_map_area_linear(struct ps3_dma_region *r,
-	unsigned long virt_addr, unsigned long len, unsigned long *bus_addr,
+	unsigned long virt_addr, unsigned long len, dma_addr_t *bus_addr,
 	u64 iopte_flag)
 {
 	unsigned long phys_addr = is_kernel_addr(virt_addr) ? __pa(virt_addr)
@@ -1091,7 +1096,7 @@
  */
 
 static int dma_sb_unmap_area_linear(struct ps3_dma_region *r,
-	unsigned long bus_addr, unsigned long len)
+	dma_addr_t bus_addr, unsigned long len)
 {
 	return 0;
 };
@@ -1169,13 +1174,13 @@
 EXPORT_SYMBOL(ps3_dma_region_free);
 
 int ps3_dma_map(struct ps3_dma_region *r, unsigned long virt_addr,
-	unsigned long len, unsigned long *bus_addr,
+	unsigned long len, dma_addr_t *bus_addr,
 	u64 iopte_flag)
 {
 	return r->region_ops->map(r, virt_addr, len, bus_addr, iopte_flag);
 }
 
-int ps3_dma_unmap(struct ps3_dma_region *r, unsigned long bus_addr,
+int ps3_dma_unmap(struct ps3_dma_region *r, dma_addr_t bus_addr,
 	unsigned long len)
 {
 	return r->region_ops->unmap(r, bus_addr, len);
diff --git a/arch/powerpc/platforms/ps3/os-area.c b/arch/powerpc/platforms/ps3/os-area.c
index 1d20178..e1c83c2 100644
--- a/arch/powerpc/platforms/ps3/os-area.c
+++ b/arch/powerpc/platforms/ps3/os-area.c
@@ -306,7 +306,7 @@
 {
 	pr_debug("%s:%d: p.boot_flag:       %u\n", func, line, p->boot_flag);
 	pr_debug("%s:%d: p.num_params:      %u\n", func, line, p->num_params);
-	pr_debug("%s:%d: p.rtc_diff         %ld\n", func, line, p->rtc_diff);
+	pr_debug("%s:%d: p.rtc_diff         %lld\n", func, line, p->rtc_diff);
 	pr_debug("%s:%d: p.av_multi_out     %u\n", func, line, p->av_multi_out);
 	pr_debug("%s:%d: p.ctrl_button:     %u\n", func, line, p->ctrl_button);
 	pr_debug("%s:%d: p.static_ip_addr:  %u.%u.%u.%u\n", func, line,
diff --git a/arch/powerpc/platforms/ps3/repository.c b/arch/powerpc/platforms/ps3/repository.c
index 22063ad..5e304c2 100644
--- a/arch/powerpc/platforms/ps3/repository.c
+++ b/arch/powerpc/platforms/ps3/repository.c
@@ -44,7 +44,7 @@
 		s[i] = (in[i] <= 126 && in[i] >= 32) ? in[i] : '.';
 	s[i] = 0;
 
-	pr_debug("%s:%d: %s%016lx : %s\n", func, line, hdr, n, s);
+	pr_debug("%s:%d: %s%016llx : %s\n", func, line, hdr, n, s);
 #endif
 }
 
@@ -70,8 +70,8 @@
 	_dump_field("n2: ", n2, func, line);
 	_dump_field("n3: ", n3, func, line);
 	_dump_field("n4: ", n4, func, line);
-	pr_debug("%s:%d: v1: %016lx\n", func, line, v1);
-	pr_debug("%s:%d: v2: %016lx\n", func, line, v2);
+	pr_debug("%s:%d: v1: %016llx\n", func, line, v1);
+	pr_debug("%s:%d: v2: %016llx\n", func, line, v2);
 }
 
 /**
@@ -149,10 +149,10 @@
 		*_v2 = v2;
 
 	if (v1 && !_v1)
-		pr_debug("%s:%d: warning: discarding non-zero v1: %016lx\n",
+		pr_debug("%s:%d: warning: discarding non-zero v1: %016llx\n",
 			__func__, __LINE__, v1);
 	if (v2 && !_v2)
-		pr_debug("%s:%d: warning: discarding non-zero v2: %016lx\n",
+		pr_debug("%s:%d: warning: discarding non-zero v2: %016llx\n",
 			__func__, __LINE__, v2);
 
 	return 0;
@@ -327,7 +327,7 @@
 		return result;
 	}
 
-	pr_debug("%s:%d: bus_type %u, bus_index %u, bus_id %lu, num_dev %u\n",
+	pr_debug("%s:%d: bus_type %u, bus_index %u, bus_id %llu, num_dev %u\n",
 		__func__, __LINE__, tmp.bus_type, tmp.bus_index, tmp.bus_id,
 		num_dev);
 
@@ -353,7 +353,7 @@
 		return result;
 	}
 
-	pr_debug("%s:%d: found: dev_type %u, dev_index %u, dev_id %lu\n",
+	pr_debug("%s:%d: found: dev_type %u, dev_index %u, dev_id %llu\n",
 		__func__, __LINE__, tmp.dev_type, tmp.dev_index, tmp.dev_id);
 
 	*repo = tmp;
@@ -367,7 +367,7 @@
 	struct ps3_repository_device tmp;
 	unsigned int num_dev;
 
-	pr_debug(" -> %s:%u: find device by id %lu:%lu\n", __func__, __LINE__,
+	pr_debug(" -> %s:%u: find device by id %llu:%llu\n", __func__, __LINE__,
 		 bus_id, dev_id);
 
 	for (tmp.bus_index = 0; tmp.bus_index < 10; tmp.bus_index++) {
@@ -382,7 +382,7 @@
 		if (tmp.bus_id == bus_id)
 			goto found_bus;
 
-		pr_debug("%s:%u: skip, bus_id %lu\n", __func__, __LINE__,
+		pr_debug("%s:%u: skip, bus_id %llu\n", __func__, __LINE__,
 			 tmp.bus_id);
 	}
 	pr_debug(" <- %s:%u: bus not found\n", __func__, __LINE__);
@@ -416,7 +416,7 @@
 		if (tmp.dev_id == dev_id)
 			goto found_dev;
 
-		pr_debug("%s:%u: skip, dev_id %lu\n", __func__, __LINE__,
+		pr_debug("%s:%u: skip, dev_id %llu\n", __func__, __LINE__,
 			 tmp.dev_id);
 	}
 	pr_debug(" <- %s:%u: dev not found\n", __func__, __LINE__);
@@ -430,7 +430,7 @@
 		return result;
 	}
 
-	pr_debug(" <- %s:%u: found: type (%u:%u) index (%u:%u) id (%lu:%lu)\n",
+	pr_debug(" <- %s:%u: found: type (%u:%u) index (%u:%u) id (%llu:%llu)\n",
 		 __func__, __LINE__, tmp.bus_type, tmp.dev_type, tmp.bus_index,
 		 tmp.dev_index, tmp.bus_id, tmp.dev_id);
 	*repo = tmp;
diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c
index 35f3e85..3331ccb 100644
--- a/arch/powerpc/platforms/ps3/setup.c
+++ b/arch/powerpc/platforms/ps3/setup.c
@@ -186,7 +186,7 @@
 #define prealloc_ps3flash_bounce_buffer()	do { } while (0)
 #endif
 
-static int ps3_set_dabr(u64 dabr)
+static int ps3_set_dabr(unsigned long dabr)
 {
 	enum {DABR_USER = 1, DABR_KERNEL = 2,};
 
diff --git a/arch/powerpc/platforms/ps3/spu.c b/arch/powerpc/platforms/ps3/spu.c
index ccae3d4..b3c6a99 100644
--- a/arch/powerpc/platforms/ps3/spu.c
+++ b/arch/powerpc/platforms/ps3/spu.c
@@ -149,7 +149,7 @@
 
 static unsigned long get_vas_id(void)
 {
-	unsigned long id;
+	u64 id;
 
 	lv1_get_logical_ppe_id(&id);
 	lv1_get_virtual_address_space_id_of_ppe(id, &id);
@@ -160,14 +160,18 @@
 static int __init construct_spu(struct spu *spu)
 {
 	int result;
-	unsigned long unused;
+	u64 unused;
+	u64 problem_phys;
+	u64 local_store_phys;
 
 	result = lv1_construct_logical_spe(PAGE_SHIFT, PAGE_SHIFT, PAGE_SHIFT,
 		PAGE_SHIFT, PAGE_SHIFT, get_vas_id(), SPE_TYPE_LOGICAL,
-		&spu_pdata(spu)->priv2_addr, &spu->problem_phys,
-		&spu->local_store_phys, &unused,
+		&spu_pdata(spu)->priv2_addr, &problem_phys,
+		&local_store_phys, &unused,
 		&spu_pdata(spu)->shadow_addr,
 		&spu_pdata(spu)->spe_id);
+	spu->problem_phys = problem_phys;
+	spu->local_store_phys = local_store_phys;
 
 	if (result) {
 		pr_debug("%s:%d: lv1_construct_logical_spe failed: %s\n",
diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c
index ee0d229..58311a8 100644
--- a/arch/powerpc/platforms/ps3/system-bus.c
+++ b/arch/powerpc/platforms/ps3/system-bus.c
@@ -182,7 +182,7 @@
 	case PS3_MATCH_ID_SYSTEM_MANAGER:
 		pr_debug("%s:%d: unsupported match_id: %u\n", __func__,
 			__LINE__, dev->match_id);
-		pr_debug("%s:%d: bus_id: %lu\n", __func__, __LINE__,
+		pr_debug("%s:%d: bus_id: %llu\n", __func__, __LINE__,
 			dev->bus_id);
 		BUG();
 		return -EINVAL;
@@ -220,7 +220,7 @@
 	case PS3_MATCH_ID_SYSTEM_MANAGER:
 		pr_debug("%s:%d: unsupported match_id: %u\n", __func__,
 			__LINE__, dev->match_id);
-		pr_debug("%s:%d: bus_id: %lu\n", __func__, __LINE__,
+		pr_debug("%s:%d: bus_id: %llu\n", __func__, __LINE__,
 			dev->bus_id);
 		BUG();
 		return -EINVAL;
@@ -240,7 +240,7 @@
 static void _dump_mmio_region(const struct ps3_mmio_region* r,
 	const char* func, int line)
 {
-	pr_debug("%s:%d: dev       %lu:%lu\n", func, line, r->dev->bus_id,
+	pr_debug("%s:%d: dev       %llu:%llu\n", func, line, r->dev->bus_id,
 		r->dev->dev_id);
 	pr_debug("%s:%d: bus_addr  %lxh\n", func, line, r->bus_addr);
 	pr_debug("%s:%d: len       %lxh\n", func, line, r->len);
@@ -250,9 +250,11 @@
 static int ps3_sb_mmio_region_create(struct ps3_mmio_region *r)
 {
 	int result;
+	u64 lpar_addr;
 
 	result = lv1_map_device_mmio_region(r->dev->bus_id, r->dev->dev_id,
-		r->bus_addr, r->len, r->page_size, &r->lpar_addr);
+		r->bus_addr, r->len, r->page_size, &lpar_addr);
+	r->lpar_addr = lpar_addr;
 
 	if (result) {
 		pr_debug("%s:%d: lv1_map_device_mmio_region failed: %s\n",
@@ -568,7 +570,7 @@
 {
 	struct ps3_system_bus_device *dev = ps3_dev_to_system_bus_dev(_dev);
 	int result;
-	unsigned long bus_addr;
+	dma_addr_t bus_addr;
 	void *ptr = page_address(page) + offset;
 
 	result = ps3_dma_map(dev->d_region, (unsigned long)ptr, size,
@@ -590,7 +592,7 @@
 {
 	struct ps3_system_bus_device *dev = ps3_dev_to_system_bus_dev(_dev);
 	int result;
-	unsigned long bus_addr;
+	dma_addr_t bus_addr;
 	u64 iopte_flag;
 	void *ptr = page_address(page) + offset;
 
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index c90817a..3ee01b4 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -127,10 +127,10 @@
 		}
 
 		if (rc && printk_ratelimit()) {
-			printk("tce_build_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc);
-			printk("\tindex   = 0x%lx\n", (u64)tbl->it_index);
-			printk("\ttcenum  = 0x%lx\n", (u64)tcenum);
-			printk("\ttce val = 0x%lx\n", tce );
+			printk("tce_build_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc);
+			printk("\tindex   = 0x%llx\n", (u64)tbl->it_index);
+			printk("\ttcenum  = 0x%llx\n", (u64)tcenum);
+			printk("\ttce val = 0x%llx\n", tce );
 			show_stack(current, (unsigned long *)__get_SP());
 		}
 
@@ -210,10 +210,10 @@
 	}
 
 	if (rc && printk_ratelimit()) {
-		printk("tce_buildmulti_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc);
-		printk("\tindex   = 0x%lx\n", (u64)tbl->it_index);
-		printk("\tnpages  = 0x%lx\n", (u64)npages);
-		printk("\ttce[0] val = 0x%lx\n", tcep[0]);
+		printk("tce_buildmulti_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc);
+		printk("\tindex   = 0x%llx\n", (u64)tbl->it_index);
+		printk("\tnpages  = 0x%llx\n", (u64)npages);
+		printk("\ttce[0] val = 0x%llx\n", tcep[0]);
 		show_stack(current, (unsigned long *)__get_SP());
 	}
 	return ret;
@@ -227,9 +227,9 @@
 		rc = plpar_tce_put((u64)tbl->it_index, (u64)tcenum << 12, 0);
 
 		if (rc && printk_ratelimit()) {
-			printk("tce_free_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc);
-			printk("\tindex   = 0x%lx\n", (u64)tbl->it_index);
-			printk("\ttcenum  = 0x%lx\n", (u64)tcenum);
+			printk("tce_free_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc);
+			printk("\tindex   = 0x%llx\n", (u64)tbl->it_index);
+			printk("\ttcenum  = 0x%llx\n", (u64)tcenum);
 			show_stack(current, (unsigned long *)__get_SP());
 		}
 
@@ -246,9 +246,9 @@
 
 	if (rc && printk_ratelimit()) {
 		printk("tce_freemulti_pSeriesLP: plpar_tce_stuff failed\n");
-		printk("\trc      = %ld\n", rc);
-		printk("\tindex   = 0x%lx\n", (u64)tbl->it_index);
-		printk("\tnpages  = 0x%lx\n", (u64)npages);
+		printk("\trc      = %lld\n", rc);
+		printk("\tindex   = 0x%llx\n", (u64)tbl->it_index);
+		printk("\tnpages  = 0x%llx\n", (u64)npages);
 		show_stack(current, (unsigned long *)__get_SP());
 	}
 }
@@ -261,10 +261,9 @@
 	rc = plpar_tce_get((u64)tbl->it_index, (u64)tcenum << 12, &tce_ret);
 
 	if (rc && printk_ratelimit()) {
-		printk("tce_get_pSeriesLP: plpar_tce_get failed. rc=%ld\n",
-			rc);
-		printk("\tindex   = 0x%lx\n", (u64)tbl->it_index);
-		printk("\ttcenum  = 0x%lx\n", (u64)tcenum);
+		printk("tce_get_pSeriesLP: plpar_tce_get failed. rc=%lld\n", rc);
+		printk("\tindex   = 0x%llx\n", (u64)tbl->it_index);
+		printk("\ttcenum  = 0x%llx\n", (u64)tcenum);
 		show_stack(current, (unsigned long *)__get_SP());
 	}
 
diff --git a/arch/powerpc/platforms/pseries/phyp_dump.c b/arch/powerpc/platforms/pseries/phyp_dump.c
index 6cf35cd..15eb610 100644
--- a/arch/powerpc/platforms/pseries/phyp_dump.c
+++ b/arch/powerpc/platforms/pseries/phyp_dump.c
@@ -144,8 +144,8 @@
 		ph->first_offset_section);
 	printk(KERN_INFO "dump disk sections should be zero\n");
 	printk(KERN_INFO "dump disk section = %d\n", ph->dump_disk_section);
-	printk(KERN_INFO "block num = %ld\n", ph->block_num_dd);
-	printk(KERN_INFO "number of blocks = %ld\n", ph->num_of_blocks_dd);
+	printk(KERN_INFO "block num = %lld\n", ph->block_num_dd);
+	printk(KERN_INFO "number of blocks = %lld\n", ph->num_of_blocks_dd);
 	printk(KERN_INFO "dump disk offset = %d\n", ph->offset_dd);
 	printk(KERN_INFO "Max auto time= %d\n", ph->maxtime_to_auto);
 
@@ -154,33 +154,33 @@
 	printk(KERN_INFO "cpu dump_flags =%d\n", ph->cpu_data.dump_flags);
 	printk(KERN_INFO "cpu source_type =%d\n", ph->cpu_data.source_type);
 	printk(KERN_INFO "cpu error_flags =%d\n", ph->cpu_data.error_flags);
-	printk(KERN_INFO "cpu source_address =%lx\n",
+	printk(KERN_INFO "cpu source_address =%llx\n",
 		ph->cpu_data.source_address);
-	printk(KERN_INFO "cpu source_length =%lx\n",
+	printk(KERN_INFO "cpu source_length =%llx\n",
 		ph->cpu_data.source_length);
-	printk(KERN_INFO "cpu length_copied =%lx\n",
+	printk(KERN_INFO "cpu length_copied =%llx\n",
 		ph->cpu_data.length_copied);
 
 	printk(KERN_INFO " HPTE AREA \n");
 	printk(KERN_INFO "HPTE dump_flags =%d\n", ph->hpte_data.dump_flags);
 	printk(KERN_INFO "HPTE source_type =%d\n", ph->hpte_data.source_type);
 	printk(KERN_INFO "HPTE error_flags =%d\n", ph->hpte_data.error_flags);
-	printk(KERN_INFO "HPTE source_address =%lx\n",
+	printk(KERN_INFO "HPTE source_address =%llx\n",
 		ph->hpte_data.source_address);
-	printk(KERN_INFO "HPTE source_length =%lx\n",
+	printk(KERN_INFO "HPTE source_length =%llx\n",
 		ph->hpte_data.source_length);
-	printk(KERN_INFO "HPTE length_copied =%lx\n",
+	printk(KERN_INFO "HPTE length_copied =%llx\n",
 		ph->hpte_data.length_copied);
 
 	printk(KERN_INFO " SRSD AREA \n");
 	printk(KERN_INFO "SRSD dump_flags =%d\n", ph->kernel_data.dump_flags);
 	printk(KERN_INFO "SRSD source_type =%d\n", ph->kernel_data.source_type);
 	printk(KERN_INFO "SRSD error_flags =%d\n", ph->kernel_data.error_flags);
-	printk(KERN_INFO "SRSD source_address =%lx\n",
+	printk(KERN_INFO "SRSD source_address =%llx\n",
 		ph->kernel_data.source_address);
-	printk(KERN_INFO "SRSD source_length =%lx\n",
+	printk(KERN_INFO "SRSD source_length =%llx\n",
 		ph->kernel_data.source_length);
-	printk(KERN_INFO "SRSD length_copied =%lx\n",
+	printk(KERN_INFO "SRSD length_copied =%llx\n",
 		ph->kernel_data.length_copied);
 #endif
 }
@@ -367,8 +367,8 @@
 	/* total reserved size - start of scratch area */
 	second_addr_range = phyp_dump_info->init_reserve_size -
 				phyp_dump_info->reserved_scratch_size;
-	return sprintf(buf, "CPU:0x%lx-0x%lx: HPTE:0x%lx-0x%lx:"
-			    " DUMP:0x%lx-0x%lx, 0x%lx-0x%lx:\n",
+	return sprintf(buf, "CPU:0x%llx-0x%llx: HPTE:0x%llx-0x%llx:"
+			    " DUMP:0x%llx-0x%llx, 0x%lx-0x%llx:\n",
 		phdr.cpu_data.destination_address,
 		phdr.cpu_data.length_copied,
 		phdr.hpte_data.destination_address,
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index f611d03..9817f63 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -28,63 +28,104 @@
 #include <sysdev/fsl_pci.h>
 
 #if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx)
+static int __init setup_one_atmu(struct ccsr_pci __iomem *pci,
+	unsigned int index, const struct resource *res,
+	resource_size_t offset)
+{
+	resource_size_t pci_addr = res->start - offset;
+	resource_size_t phys_addr = res->start;
+	resource_size_t size = res->end - res->start + 1;
+	u32 flags = 0x80044000; /* enable & mem R/W */
+	unsigned int i;
+
+	pr_debug("PCI MEM resource start 0x%016llx, size 0x%016llx.\n",
+		(u64)res->start, (u64)size);
+
+	if (res->flags & IORESOURCE_PREFETCH)
+		flags |= 0x10000000; /* enable relaxed ordering */
+
+	for (i = 0; size > 0; i++) {
+		unsigned int bits = min(__ilog2(size),
+					__ffs(pci_addr | phys_addr));
+
+		if (index + i >= 5)
+			return -1;
+
+		out_be32(&pci->pow[index + i].potar, pci_addr >> 12);
+		out_be32(&pci->pow[index + i].potear, (u64)pci_addr >> 44);
+		out_be32(&pci->pow[index + i].powbar, phys_addr >> 12);
+		out_be32(&pci->pow[index + i].powar, flags | (bits - 1));
+
+		pci_addr += (resource_size_t)1U << bits;
+		phys_addr += (resource_size_t)1U << bits;
+		size -= (resource_size_t)1U << bits;
+	}
+
+	return i;
+}
+
 /* atmu setup for fsl pci/pcie controller */
 static void __init setup_pci_atmu(struct pci_controller *hose,
 				  struct resource *rsrc)
 {
 	struct ccsr_pci __iomem *pci;
-	int i;
+	int i, j, n;
 
 	pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n",
 		    (u64)rsrc->start, (u64)rsrc->end - (u64)rsrc->start + 1);
 	pci = ioremap(rsrc->start, rsrc->end - rsrc->start + 1);
+	if (!pci) {
+	    dev_err(hose->parent, "Unable to map ATMU registers\n");
+	    return;
+	}
 
-	/* Disable all windows (except powar0 since its ignored) */
+	/* Disable all windows (except powar0 since it's ignored) */
 	for(i = 1; i < 5; i++)
 		out_be32(&pci->pow[i].powar, 0);
 	for(i = 0; i < 3; i++)
 		out_be32(&pci->piw[i].piwar, 0);
 
 	/* Setup outbound MEM window */
-	for(i = 0; i < 3; i++)
-		if (hose->mem_resources[i].flags & IORESOURCE_MEM){
-			resource_size_t pci_addr_start =
-				 hose->mem_resources[i].start -
-				 hose->pci_mem_offset;
-			pr_debug("PCI MEM resource start 0x%016llx, size 0x%016llx.\n",
-				(u64)hose->mem_resources[i].start,
-				(u64)hose->mem_resources[i].end
-				  - (u64)hose->mem_resources[i].start + 1);
-			out_be32(&pci->pow[i+1].potar, (pci_addr_start >> 12));
-			out_be32(&pci->pow[i+1].potear, 0);
-			out_be32(&pci->pow[i+1].powbar,
-				(hose->mem_resources[i].start >> 12));
-			/* Enable, Mem R/W */
-			out_be32(&pci->pow[i+1].powar, 0x80044000
-				| (__ilog2(hose->mem_resources[i].end
-				- hose->mem_resources[i].start + 1) - 1));
-		}
+	for(i = 0, j = 1; i < 3; i++) {
+		if (!(hose->mem_resources[i].flags & IORESOURCE_MEM))
+			continue;
+
+		n = setup_one_atmu(pci, j, &hose->mem_resources[i],
+				   hose->pci_mem_offset);
+
+		if (n < 0 || j >= 5) {
+			pr_err("Ran out of outbound PCI ATMUs for resource %d!\n", i);
+			hose->mem_resources[i].flags |= IORESOURCE_DISABLED;
+		} else
+			j += n;
+	}
 
 	/* Setup outbound IO window */
-	if (hose->io_resource.flags & IORESOURCE_IO){
-		pr_debug("PCI IO resource start 0x%016llx, size 0x%016llx, "
-			 "phy base 0x%016llx.\n",
-			(u64)hose->io_resource.start,
-			(u64)hose->io_resource.end - (u64)hose->io_resource.start + 1,
-			(u64)hose->io_base_phys);
-		out_be32(&pci->pow[i+1].potar, (hose->io_resource.start >> 12));
-		out_be32(&pci->pow[i+1].potear, 0);
-		out_be32(&pci->pow[i+1].powbar, (hose->io_base_phys >> 12));
-		/* Enable, IO R/W */
-		out_be32(&pci->pow[i+1].powar, 0x80088000
-			| (__ilog2(hose->io_resource.end
-			- hose->io_resource.start + 1) - 1));
+	if (hose->io_resource.flags & IORESOURCE_IO) {
+		if (j >= 5) {
+			pr_err("Ran out of outbound PCI ATMUs for IO resource\n");
+		} else {
+			pr_debug("PCI IO resource start 0x%016llx, size 0x%016llx, "
+				 "phy base 0x%016llx.\n",
+				(u64)hose->io_resource.start,
+				(u64)hose->io_resource.end - (u64)hose->io_resource.start + 1,
+				(u64)hose->io_base_phys);
+			out_be32(&pci->pow[j].potar, (hose->io_resource.start >> 12));
+			out_be32(&pci->pow[j].potear, 0);
+			out_be32(&pci->pow[j].powbar, (hose->io_base_phys >> 12));
+			/* Enable, IO R/W */
+			out_be32(&pci->pow[j].powar, 0x80088000
+				| (__ilog2(hose->io_resource.end
+				- hose->io_resource.start + 1) - 1));
+		}
 	}
 
 	/* Setup 2G inbound Memory Window @ 1 */
 	out_be32(&pci->piw[2].pitar, 0x00000000);
 	out_be32(&pci->piw[2].piwbar,0x00000000);
 	out_be32(&pci->piw[2].piwar, PIWAR_2G);
+
+	iounmap(pci);
 }
 
 static void __init setup_pci_cmd(struct pci_controller *hose)
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 3e0d89d..a35297d 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -435,7 +435,7 @@
 		addr = addr | ((u64)readl(base + HT_MSI_ADDR_HI) << 32);
 	}
 
-	printk(KERN_DEBUG "mpic:   - HT:%02x.%x %s MSI mapping found @ 0x%lx\n",
+	printk(KERN_DEBUG "mpic:   - HT:%02x.%x %s MSI mapping found @ 0x%llx\n",
 		PCI_SLOT(devfn), PCI_FUNC(devfn),
 		flags & HT_MSI_FLAGS_ENABLE ? "enabled" : "disabled", addr);
 
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index a94a3c3..6b0a353 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -77,6 +77,7 @@
 config S390
 	def_bool y
 	select USE_GENERIC_SMP_HELPERS if SMP
+	select HAVE_SYSCALL_WRAPPERS
 	select HAVE_FUNCTION_TRACER
 	select HAVE_OPROFILE
 	select HAVE_KPROBES
diff --git a/arch/s390/include/asm/Kbuild b/arch/s390/include/asm/Kbuild
index f2af416..63a2341 100644
--- a/arch/s390/include/asm/Kbuild
+++ b/arch/s390/include/asm/Kbuild
@@ -13,4 +13,3 @@
 unifdef-y += debug.h
 unifdef-y += chpid.h
 unifdef-y += schid.h
-unifdef-y += swab.h
diff --git a/arch/s390/include/asm/byteorder.h b/arch/s390/include/asm/byteorder.h
index b95a2b2..a332e59 100644
--- a/arch/s390/include/asm/byteorder.h
+++ b/arch/s390/include/asm/byteorder.h
@@ -1,7 +1,6 @@
 #ifndef _S390_BYTEORDER_H
 #define _S390_BYTEORDER_H
 
-#include <asm/swab.h>
 #include <linux/byteorder/big_endian.h>
 
 #endif /* _S390_BYTEORDER_H */
diff --git a/arch/s390/include/asm/elf.h b/arch/s390/include/asm/elf.h
index d480f39..74d0bbb 100644
--- a/arch/s390/include/asm/elf.h
+++ b/arch/s390/include/asm/elf.h
@@ -172,14 +172,14 @@
 #ifndef __s390x__
 #define SET_PERSONALITY(ex) set_personality(PER_LINUX)
 #else /* __s390x__ */
-#define SET_PERSONALITY(ex)				\
-do {							\
-	if (current->personality != PER_LINUX32)	\
-		set_personality(PER_LINUX);		\
-	if ((ex).e_ident[EI_CLASS] == ELFCLASS32)	\
-		set_thread_flag(TIF_31BIT);		\
-	else						\
-		clear_thread_flag(TIF_31BIT);		\
+#define SET_PERSONALITY(ex)					\
+do {								\
+	if (personality(current->personality) != PER_LINUX32)	\
+		set_personality(PER_LINUX);			\
+	if ((ex).e_ident[EI_CLASS] == ELFCLASS32)		\
+		set_thread_flag(TIF_31BIT);			\
+	else							\
+		clear_thread_flag(TIF_31BIT);			\
 } while (0)
 #endif /* __s390x__ */
 
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index fc2c971..62c706e 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -547,7 +547,7 @@
 	.globl	sys32_newuname_wrapper
 sys32_newuname_wrapper:
 	llgtr	%r2,%r2			# struct new_utsname *
-	jg	s390x_newuname		# branch to system call
+	jg	sys_s390_newuname	# branch to system call
 
 	.globl	compat_sys_adjtimex_wrapper
 compat_sys_adjtimex_wrapper:
@@ -615,7 +615,7 @@
 	.globl	sys32_personality_wrapper
 sys32_personality_wrapper:
 	llgfr	%r2,%r2			# unsigned long
-	jg	s390x_personality	# branch to system call
+	jg	sys_s390_personality	# branch to system call
 
 	.globl	sys32_setfsuid16_wrapper
 sys32_setfsuid16_wrapper:
@@ -1767,3 +1767,41 @@
 sys_epoll_create1_wrapper:
 	lgfr	%r2,%r2			# int
 	jg	sys_epoll_create1	# branch to system call
+
+	.globl	sys32_readahead_wrapper
+sys32_readahead_wrapper:
+	lgfr	%r2,%r2			# int
+	llgfr	%r3,%r3			# u32
+	llgfr	%r4,%r4			# u32
+	lgfr	%r5,%r5			# s32
+	jg	sys32_readahead		# branch to system call
+
+	.globl	sys32_sendfile64_wrapper
+sys32_sendfile64_wrapper:
+	lgfr	%r2,%r2			# int
+	lgfr	%r3,%r3			# int
+	llgtr	%r4,%r4			# compat_loff_t *
+	lgfr	%r5,%r5			# s32
+	jg	sys32_sendfile64	# branch to system call
+
+	.globl	sys_tkill_wrapper
+sys_tkill_wrapper:
+	lgfr	%r2,%r2			# pid_t
+	lgfr	%r3,%r3			# int
+	jg	sys_tkill		# branch to system call
+
+	.globl	sys_tgkill_wrapper
+sys_tgkill_wrapper:
+	lgfr	%r2,%r2			# pid_t
+	lgfr	%r3,%r3			# pid_t
+	lgfr	%r4,%r4			# int
+	jg	sys_tgkill		# branch to system call
+
+	.globl	compat_sys_keyctl_wrapper
+compat_sys_keyctl_wrapper:
+	llgfr	%r2,%r2			# u32
+	llgfr	%r3,%r3			# u32
+	llgfr	%r4,%r4			# u32
+	llgfr	%r5,%r5			# u32
+	llgfr	%r6,%r6			# u32
+	jg	compat_sys_keyctl	# branch to system call
diff --git a/arch/s390/kernel/entry.h b/arch/s390/kernel/entry.h
index a65afc9..950c59c 100644
--- a/arch/s390/kernel/entry.h
+++ b/arch/s390/kernel/entry.h
@@ -30,23 +30,23 @@
 struct old_sigaction;
 struct sel_arg_struct;
 
-long sys_pipe(unsigned long __user *fildes);
 long sys_mmap2(struct mmap_arg_struct __user  *arg);
-long old_mmap(struct mmap_arg_struct __user *arg);
+long sys_s390_old_mmap(struct mmap_arg_struct __user *arg);
 long sys_ipc(uint call, int first, unsigned long second,
 	     unsigned long third, void __user *ptr);
-long s390x_newuname(struct new_utsname __user *name);
-long s390x_personality(unsigned long personality);
-long s390_fadvise64(int fd, u32 offset_high, u32 offset_low,
+long sys_s390_newuname(struct new_utsname __user *name);
+long sys_s390_personality(unsigned long personality);
+long sys_s390_fadvise64(int fd, u32 offset_high, u32 offset_low,
 		    size_t len, int advice);
-long s390_fadvise64_64(struct fadvise64_64_args __user *args);
-long s390_fallocate(int fd, int mode, loff_t offset, u32 len_high, u32 len_low);
+long sys_s390_fadvise64_64(struct fadvise64_64_args __user *args);
+long sys_s390_fallocate(int fd, int mode, loff_t offset, u32 len_high,
+			u32 len_low);
 long sys_fork(void);
 long sys_clone(void);
 long sys_vfork(void);
 void execve_tail(void);
 long sys_execve(void);
-int sys_sigsuspend(int history0, int history1, old_sigset_t mask);
+long sys_sigsuspend(int history0, int history1, old_sigset_t mask);
 long sys_sigaction(int sig, const struct old_sigaction __user *act,
 		   struct old_sigaction __user *oact);
 long sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss);
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index b6110bd..5cd38a9 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -39,6 +39,7 @@
 #include <linux/tick.h>
 #include <linux/elfcore.h>
 #include <linux/kernel_stat.h>
+#include <linux/syscalls.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -225,13 +226,13 @@
         return 0;
 }
 
-asmlinkage long sys_fork(void)
+SYSCALL_DEFINE0(fork)
 {
 	struct pt_regs *regs = task_pt_regs(current);
 	return do_fork(SIGCHLD, regs->gprs[15], regs, 0, NULL, NULL);
 }
 
-asmlinkage long sys_clone(void)
+SYSCALL_DEFINE0(clone)
 {
 	struct pt_regs *regs = task_pt_regs(current);
 	unsigned long clone_flags;
@@ -258,7 +259,7 @@
  * do not have enough call-clobbered registers to hold all
  * the information you need.
  */
-asmlinkage long sys_vfork(void)
+SYSCALL_DEFINE0(vfork)
 {
 	struct pt_regs *regs = task_pt_regs(current);
 	return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD,
@@ -278,7 +279,7 @@
 /*
  * sys_execve() executes a new program.
  */
-asmlinkage long sys_execve(void)
+SYSCALL_DEFINE0(execve)
 {
 	struct pt_regs *regs = task_pt_regs(current);
 	char *filename;
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index 8e6812a..3cf74c3 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -25,6 +25,7 @@
 #include <linux/personality.h>
 #include <linux/binfmts.h>
 #include <linux/tracehook.h>
+#include <linux/syscalls.h>
 #include <asm/ucontext.h>
 #include <asm/uaccess.h>
 #include <asm/lowcore.h>
@@ -53,8 +54,7 @@
 /*
  * Atomically swap in the new signal mask, and wait for a signal.
  */
-asmlinkage int
-sys_sigsuspend(int history0, int history1, old_sigset_t mask)
+SYSCALL_DEFINE3(sigsuspend, int, history0, int, history1, old_sigset_t, mask)
 {
 	mask &= _BLOCKABLE;
 	spin_lock_irq(&current->sighand->siglock);
@@ -70,9 +70,8 @@
 	return -ERESTARTNOHAND;
 }
 
-asmlinkage long
-sys_sigaction(int sig, const struct old_sigaction __user *act,
-	      struct old_sigaction __user *oact)
+SYSCALL_DEFINE3(sigaction, int, sig, const struct old_sigaction __user *, act,
+		struct old_sigaction __user *, oact)
 {
 	struct k_sigaction new_ka, old_ka;
 	int ret;
@@ -102,15 +101,13 @@
 	return ret;
 }
 
-asmlinkage long
-sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss)
+SYSCALL_DEFINE2(sigaltstack, const stack_t __user *, uss,
+		stack_t __user *, uoss)
 {
 	struct pt_regs *regs = task_pt_regs(current);
 	return do_sigaltstack(uss, uoss, regs->gprs[15]);
 }
 
-
-
 /* Returns non-zero on fault. */
 static int save_sigregs(struct pt_regs *regs, _sigregs __user *sregs)
 {
@@ -164,7 +161,7 @@
 	return 0;
 }
 
-asmlinkage long sys_sigreturn(void)
+SYSCALL_DEFINE0(sigreturn)
 {
 	struct pt_regs *regs = task_pt_regs(current);
 	sigframe __user *frame = (sigframe __user *)regs->gprs[15];
@@ -191,7 +188,7 @@
 	return 0;
 }
 
-asmlinkage long sys_rt_sigreturn(void)
+SYSCALL_DEFINE0(rt_sigreturn)
 {
 	struct pt_regs *regs = task_pt_regs(current);
 	rt_sigframe __user *frame = (rt_sigframe __user *)regs->gprs[15];
diff --git a/arch/s390/kernel/sys_s390.c b/arch/s390/kernel/sys_s390.c
index c34be45..c7ae4b1 100644
--- a/arch/s390/kernel/sys_s390.c
+++ b/arch/s390/kernel/sys_s390.c
@@ -29,6 +29,7 @@
 #include <linux/personality.h>
 #include <linux/unistd.h>
 #include <linux/ipc.h>
+#include <linux/syscalls.h>
 #include <asm/uaccess.h>
 #include "entry.h"
 
@@ -74,7 +75,7 @@
 	unsigned long offset;
 };
 
-asmlinkage long sys_mmap2(struct mmap_arg_struct __user  *arg)
+SYSCALL_DEFINE1(mmap2, struct mmap_arg_struct __user *, arg)
 {
 	struct mmap_arg_struct a;
 	int error = -EFAULT;
@@ -86,7 +87,7 @@
 	return error;
 }
 
-asmlinkage long old_mmap(struct mmap_arg_struct __user *arg)
+SYSCALL_DEFINE1(s390_old_mmap, struct mmap_arg_struct __user *, arg)
 {
 	struct mmap_arg_struct a;
 	long error = -EFAULT;
@@ -108,8 +109,8 @@
  *
  * This is really horribly ugly.
  */
-asmlinkage long sys_ipc(uint call, int first, unsigned long second,
-				  unsigned long third, void __user *ptr)
+SYSCALL_DEFINE5(ipc, uint, call, int, first, unsigned long, second,
+		unsigned long, third, void __user *, ptr)
 {
         struct ipc_kludge tmp;
 	int ret;
@@ -175,7 +176,7 @@
 }
 
 #ifdef CONFIG_64BIT
-asmlinkage long s390x_newuname(struct new_utsname __user *name)
+SYSCALL_DEFINE1(s390_newuname, struct new_utsname __user *, name)
 {
 	int ret = sys_newuname(name);
 
@@ -186,7 +187,7 @@
 	return ret;
 }
 
-asmlinkage long s390x_personality(unsigned long personality)
+SYSCALL_DEFINE1(s390_personality, unsigned long, personality)
 {
 	int ret;
 
@@ -205,15 +206,13 @@
  */
 #ifndef CONFIG_64BIT
 
-asmlinkage long
-s390_fadvise64(int fd, u32 offset_high, u32 offset_low, size_t len, int advice)
+SYSCALL_DEFINE5(s390_fadvise64, int, fd, u32, offset_high, u32, offset_low,
+		size_t, len, int, advice)
 {
 	return sys_fadvise64(fd, (u64) offset_high << 32 | offset_low,
 			len, advice);
 }
 
-#endif
-
 struct fadvise64_64_args {
 	int fd;
 	long long offset;
@@ -221,8 +220,7 @@
 	int advice;
 };
 
-asmlinkage long
-s390_fadvise64_64(struct fadvise64_64_args __user *args)
+SYSCALL_DEFINE1(s390_fadvise64_64, struct fadvise64_64_args __user *, args)
 {
 	struct fadvise64_64_args a;
 
@@ -231,7 +229,6 @@
 	return sys_fadvise64_64(a.fd, a.offset, a.len, a.advice);
 }
 
-#ifndef CONFIG_64BIT
 /*
  * This is a wrapper to call sys_fallocate(). For 31 bit s390 the last
  * 64 bit argument "len" is split into the upper and lower 32 bits. The
@@ -244,9 +241,19 @@
  * to
  *   %r2: fd, %r3: mode, %r4/%r5: offset, 96(%r15)-103(%r15): len
  */
-asmlinkage long s390_fallocate(int fd, int mode, loff_t offset,
+SYSCALL_DEFINE(s390_fallocate)(int fd, int mode, loff_t offset,
 			       u32 len_high, u32 len_low)
 {
 	return sys_fallocate(fd, mode, offset, ((u64)len_high << 32) | len_low);
 }
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_s390_fallocate(long fd, long mode, loff_t offset,
+				   long len_high, long len_low)
+{
+	return SYSC_s390_fallocate((int) fd, (int) mode, offset,
+				   (u32) len_high, (u32) len_low);
+}
+SYSCALL_ALIAS(sys_s390_fallocate, SyS_s390_fallocate);
+#endif
+
 #endif
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index 2d61787..fe5b25a 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -98,7 +98,7 @@
 SYSCALL(sys_swapon,sys_swapon,sys32_swapon_wrapper)
 SYSCALL(sys_reboot,sys_reboot,sys32_reboot_wrapper)
 SYSCALL(sys_ni_syscall,sys_ni_syscall,old32_readdir_wrapper)	/* old readdir syscall */
-SYSCALL(old_mmap,old_mmap,old32_mmap_wrapper)			/* 90 */
+SYSCALL(sys_s390_old_mmap,sys_s390_old_mmap,old32_mmap_wrapper)	/* 90 */
 SYSCALL(sys_munmap,sys_munmap,sys32_munmap_wrapper)
 SYSCALL(sys_truncate,sys_truncate,sys32_truncate_wrapper)
 SYSCALL(sys_ftruncate,sys_ftruncate,sys32_ftruncate_wrapper)
@@ -130,7 +130,7 @@
 SYSCALL(sys_sigreturn,sys_sigreturn,sys32_sigreturn)
 SYSCALL(sys_clone,sys_clone,sys32_clone)			/* 120 */
 SYSCALL(sys_setdomainname,sys_setdomainname,sys32_setdomainname_wrapper)
-SYSCALL(sys_newuname,s390x_newuname,sys32_newuname_wrapper)
+SYSCALL(sys_newuname,sys_s390_newuname,sys32_newuname_wrapper)
 NI_SYSCALL							/* modify_ldt for i386 */
 SYSCALL(sys_adjtimex,sys_adjtimex,compat_sys_adjtimex_wrapper)
 SYSCALL(sys_mprotect,sys_mprotect,sys32_mprotect_wrapper)	/* 125 */
@@ -144,7 +144,7 @@
 SYSCALL(sys_fchdir,sys_fchdir,sys32_fchdir_wrapper)
 SYSCALL(sys_bdflush,sys_bdflush,sys32_bdflush_wrapper)
 SYSCALL(sys_sysfs,sys_sysfs,sys32_sysfs_wrapper)		/* 135 */
-SYSCALL(sys_personality,s390x_personality,sys32_personality_wrapper)
+SYSCALL(sys_personality,sys_s390_personality,sys32_personality_wrapper)
 NI_SYSCALL							/* for afs_syscall */
 SYSCALL(sys_setfsuid16,sys_ni_syscall,sys32_setfsuid16_wrapper)	/* old setfsuid16 syscall */
 SYSCALL(sys_setfsgid16,sys_ni_syscall,sys32_setfsgid16_wrapper)	/* old setfsgid16 syscall */
@@ -194,7 +194,7 @@
 SYSCALL(sys_getcwd,sys_getcwd,sys32_getcwd_wrapper)
 SYSCALL(sys_capget,sys_capget,sys32_capget_wrapper)
 SYSCALL(sys_capset,sys_capset,sys32_capset_wrapper)		/* 185 */
-SYSCALL(sys_sigaltstack,sys_sigaltstack,sys32_sigaltstack)
+SYSCALL(sys_sigaltstack,sys_sigaltstack,sys32_sigaltstack_wrapper)
 SYSCALL(sys_sendfile,sys_sendfile64,sys32_sendfile_wrapper)
 NI_SYSCALL							/* streams1 */
 NI_SYSCALL							/* streams2 */
@@ -230,8 +230,8 @@
 SYSCALL(sys_madvise,sys_madvise,sys32_madvise_wrapper)
 SYSCALL(sys_getdents64,sys_getdents64,sys32_getdents64_wrapper)	/* 220 */
 SYSCALL(sys_fcntl64,sys_ni_syscall,compat_sys_fcntl64_wrapper)
-SYSCALL(sys_readahead,sys_readahead,sys32_readahead)
-SYSCALL(sys_sendfile64,sys_ni_syscall,sys32_sendfile64)
+SYSCALL(sys_readahead,sys_readahead,sys32_readahead_wrapper)
+SYSCALL(sys_sendfile64,sys_ni_syscall,sys32_sendfile64_wrapper)
 SYSCALL(sys_setxattr,sys_setxattr,sys32_setxattr_wrapper)
 SYSCALL(sys_lsetxattr,sys_lsetxattr,sys32_lsetxattr_wrapper)	/* 225 */
 SYSCALL(sys_fsetxattr,sys_fsetxattr,sys32_fsetxattr_wrapper)
@@ -245,11 +245,11 @@
 SYSCALL(sys_lremovexattr,sys_lremovexattr,sys32_lremovexattr_wrapper)
 SYSCALL(sys_fremovexattr,sys_fremovexattr,sys32_fremovexattr_wrapper)	/* 235 */
 SYSCALL(sys_gettid,sys_gettid,sys_gettid)
-SYSCALL(sys_tkill,sys_tkill,sys_tkill)
+SYSCALL(sys_tkill,sys_tkill,sys_tkill_wrapper)
 SYSCALL(sys_futex,sys_futex,compat_sys_futex_wrapper)
 SYSCALL(sys_sched_setaffinity,sys_sched_setaffinity,sys32_sched_setaffinity_wrapper)
 SYSCALL(sys_sched_getaffinity,sys_sched_getaffinity,sys32_sched_getaffinity_wrapper)	/* 240 */
-SYSCALL(sys_tgkill,sys_tgkill,sys_tgkill)
+SYSCALL(sys_tgkill,sys_tgkill,sys_tgkill_wrapper)
 NI_SYSCALL							/* reserved for TUX */
 SYSCALL(sys_io_setup,sys_io_setup,sys32_io_setup_wrapper)
 SYSCALL(sys_io_destroy,sys_io_destroy,sys32_io_destroy_wrapper)
@@ -261,7 +261,7 @@
 SYSCALL(sys_epoll_ctl,sys_epoll_ctl,sys_epoll_ctl_wrapper)	/* 250 */
 SYSCALL(sys_epoll_wait,sys_epoll_wait,sys_epoll_wait_wrapper)
 SYSCALL(sys_set_tid_address,sys_set_tid_address,sys32_set_tid_address_wrapper)
-SYSCALL(s390_fadvise64,sys_fadvise64_64,sys32_fadvise64_wrapper)
+SYSCALL(sys_s390_fadvise64,sys_fadvise64_64,sys32_fadvise64_wrapper)
 SYSCALL(sys_timer_create,sys_timer_create,sys32_timer_create_wrapper)
 SYSCALL(sys_timer_settime,sys_timer_settime,sys32_timer_settime_wrapper)	/* 255 */
 SYSCALL(sys_timer_gettime,sys_timer_gettime,sys32_timer_gettime_wrapper)
@@ -272,7 +272,7 @@
 SYSCALL(sys_clock_getres,sys_clock_getres,sys32_clock_getres_wrapper)
 SYSCALL(sys_clock_nanosleep,sys_clock_nanosleep,sys32_clock_nanosleep_wrapper)
 NI_SYSCALL							/* reserved for vserver */
-SYSCALL(s390_fadvise64_64,sys_ni_syscall,sys32_fadvise64_64_wrapper)
+SYSCALL(sys_s390_fadvise64_64,sys_ni_syscall,sys32_fadvise64_64_wrapper)
 SYSCALL(sys_statfs64,sys_statfs64,compat_sys_statfs64_wrapper)
 SYSCALL(sys_fstatfs64,sys_fstatfs64,compat_sys_fstatfs64_wrapper)
 SYSCALL(sys_remap_file_pages,sys_remap_file_pages,sys32_remap_file_pages_wrapper)
@@ -288,7 +288,7 @@
 SYSCALL(sys_kexec_load,sys_kexec_load,compat_sys_kexec_load_wrapper)
 SYSCALL(sys_add_key,sys_add_key,compat_sys_add_key_wrapper)
 SYSCALL(sys_request_key,sys_request_key,compat_sys_request_key_wrapper)
-SYSCALL(sys_keyctl,sys_keyctl,compat_sys_keyctl)		/* 280 */
+SYSCALL(sys_keyctl,sys_keyctl,compat_sys_keyctl_wrapper)		/* 280 */
 SYSCALL(sys_waitid,sys_waitid,compat_sys_waitid_wrapper)
 SYSCALL(sys_ioprio_set,sys_ioprio_set,sys_ioprio_set_wrapper)
 SYSCALL(sys_ioprio_get,sys_ioprio_get,sys_ioprio_get_wrapper)
@@ -322,7 +322,7 @@
 SYSCALL(sys_getcpu,sys_getcpu,sys_getcpu_wrapper)
 SYSCALL(sys_epoll_pwait,sys_epoll_pwait,compat_sys_epoll_pwait_wrapper)
 SYSCALL(sys_utimes,sys_utimes,compat_sys_utimes_wrapper)
-SYSCALL(s390_fallocate,sys_fallocate,sys_fallocate_wrapper)
+SYSCALL(sys_s390_fallocate,sys_fallocate,sys_fallocate_wrapper)
 SYSCALL(sys_utimensat,sys_utimensat,compat_sys_utimensat_wrapper)	/* 315 */
 SYSCALL(sys_signalfd,sys_signalfd,compat_sys_signalfd_wrapper)
 NI_SYSCALL						/* 317 old sys_timer_fd */
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index d649600..fc468ca 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -399,8 +399,10 @@
 
 static void __init time_init_wq(void)
 {
-	if (!time_sync_wq)
-		time_sync_wq = create_singlethread_workqueue("timesync");
+	if (time_sync_wq)
+		return;
+	time_sync_wq = create_singlethread_workqueue("timesync");
+	stop_machine_create();
 }
 
 /*
diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c
index 2fb36e4..ecf0304 100644
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@@ -516,8 +516,12 @@
  */
 void init_cpu_vtimer(void)
 {
+	struct thread_info *ti = current_thread_info();
 	struct vtimer_queue *vq;
 
+	S390_lowcore.user_timer = ti->user_timer;
+	S390_lowcore.system_timer = ti->system_timer;
+
 	/* kick the virtual timer */
 	asm volatile ("STCK %0" : "=m" (S390_lowcore.last_update_clock));
 	asm volatile ("STPT %0" : "=m" (S390_lowcore.last_update_timer));
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index f32a519..ebabe51 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -644,66 +644,25 @@
 
 menu "Bus options"
 
-# Even on SuperH devices which don't have an ISA bus,
-# this variable helps the PCMCIA modules handle
-# IRQ requesting properly -- Greg Banks.
-#
-# Though we're generally not interested in it when
-# we're not using PCMCIA, so we make it dependent on
-# PCMCIA outright. -- PFM.
-config ISA
-	def_bool y
-	depends on PCMCIA && HD6446X_SERIES
-	help
-	  Find out whether you have ISA slots on your motherboard.  ISA is the
-	  name of a bus system, i.e. the way the CPU talks to the other stuff
-	  inside your box.  Other bus systems are PCI, EISA, MicroChannel
-	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
-	  newer boards don't support it.  If you have ISA, say Y, otherwise N.
-
-config EISA
-	bool
-	---help---
-	  The Extended Industry Standard Architecture (EISA) bus was
-	  developed as an open alternative to the IBM MicroChannel bus.
-
-	  The EISA bus provided some of the features of the IBM MicroChannel
-	  bus while maintaining backward compatibility with cards made for
-	  the older ISA bus.  The EISA bus saw limited use between 1988 and
-	  1995 when it was made obsolete by the PCI bus.
-
-	  Say Y here if you are building a kernel for an EISA-based machine.
-
-	  Otherwise, say N.
-
-config MCA
-	bool
-	help
-	  MicroChannel Architecture is found in some IBM PS/2 machines and
-	  laptops.  It is a bus system similar to PCI or ISA. See
-	  <file:Documentation/mca.txt> (and especially the web page given
-	  there) before attempting to build an MCA bus kernel.
-
-config SBUS
-	bool
-
 config SUPERHYWAY
 	tristate "SuperHyway Bus support"
 	depends on CPU_SUBTYPE_SH4_202
 
 config MAPLE
-       bool "Maple Bus support"
-       depends on SH_DREAMCAST
-       help
-         The Maple Bus is SEGA's serial communication bus for peripherals
-         on the Dreamcast. Without this bus support you won't be able to
-         get your Dreamcast keyboard etc to work, so most users
-         probably want to say 'Y' here, unless you are only using the
-         Dreamcast with a serial line terminal or a remote network
-         connection.
+	bool "Maple Bus support"
+	depends on SH_DREAMCAST
+	help
+	 The Maple Bus is SEGA's serial communication bus for peripherals
+	 on the Dreamcast. Without this bus support you won't be able to
+	 get your Dreamcast keyboard etc to work, so most users
+	 probably want to say 'Y' here, unless you are only using the
+	 Dreamcast with a serial line terminal or a remote network
+	 connection.
 
 source "arch/sh/drivers/pci/Kconfig"
 
+source "drivers/pci/pcie/Kconfig"
+
 source "drivers/pci/Kconfig"
 
 source "drivers/pcmcia/Kconfig"
diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
index 1c67cba..caf4c33 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -18,8 +18,10 @@
 #include <linux/mtd/sh_flctl.h>
 #include <linux/delay.h>
 #include <linux/i2c.h>
-#include <linux/smc911x.h>
+#include <linux/smsc911x.h>
 #include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
 #include <media/soc_camera_platform.h>
 #include <media/sh_mobile_ceu.h>
 #include <video/sh_mobile_lcdc.h>
@@ -27,12 +29,14 @@
 #include <asm/clock.h>
 #include <cpu/sh7723.h>
 
-static struct smc911x_platdata smc911x_info = {
-	.flags = SMC911X_USE_32BIT,
-	.irq_flags = IRQF_TRIGGER_LOW,
+static struct smsc911x_platform_config smsc911x_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT,
 };
 
-static struct resource smc9118_resources[] = {
+static struct resource smsc9118_resources[] = {
 	[0] = {
 		.start	= 0xb6080000,
 		.end	= 0xb60fffff,
@@ -45,13 +49,13 @@
 	}
 };
 
-static struct platform_device smc9118_device = {
-	.name		= "smc911x",
+static struct platform_device smsc9118_device = {
+	.name		= "smsc911x",
 	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smc9118_resources),
-	.resource	= smc9118_resources,
+	.num_resources	= ARRAY_SIZE(smsc9118_resources),
+	.resource	= smsc9118_resources,
 	.dev		= {
-		.platform_data = &smc911x_info,
+		.platform_data = &smsc911x_config,
 	},
 };
 
@@ -315,8 +319,22 @@
 	},
 };
 
+struct spi_gpio_platform_data sdcard_cn3_platform_data = {
+	.sck = GPIO_PTD0,
+	.mosi = GPIO_PTD1,
+	.miso = GPIO_PTD2,
+	.num_chipselect = 1,
+};
+
+static struct platform_device sdcard_cn3_device = {
+	.name		= "spi_gpio",
+	.dev	= {
+		.platform_data	= &sdcard_cn3_platform_data,
+	},
+};
+
 static struct platform_device *ap325rxa_devices[] __initdata = {
-	&smc9118_device,
+	&smsc9118_device,
 	&ap325rxa_nor_flash_device,
 	&lcdc_device,
 	&ceu_device,
@@ -324,6 +342,7 @@
 	&camera_device,
 #endif
 	&nand_flash_device,
+	&sdcard_cn3_device,
 };
 
 static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {
@@ -332,6 +351,15 @@
 	},
 };
 
+static struct spi_board_info ap325rxa_spi_devices[] = {
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 5000000,
+		.chip_select = 0,
+		.controller_data = (void *) GPIO_PTD5,
+	},
+};
+
 static int __init ap325rxa_devices_setup(void)
 {
 	/* LD3 and LD4 LEDs */
@@ -429,6 +457,9 @@
 	i2c_register_board_info(0, ap325rxa_i2c_devices,
 				ARRAY_SIZE(ap325rxa_i2c_devices));
 
+	spi_register_board_info(ap325rxa_spi_devices,
+				ARRAY_SIZE(ap325rxa_spi_devices));
+
 	return platform_add_devices(ap325rxa_devices,
 				ARRAY_SIZE(ap325rxa_devices));
 }
diff --git a/arch/sh/boards/board-magicpanelr2.c b/arch/sh/boards/board-magicpanelr2.c
index 3de22cc..0a37c8b 100644
--- a/arch/sh/boards/board-magicpanelr2.c
+++ b/arch/sh/boards/board-magicpanelr2.c
@@ -14,6 +14,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/smsc911x.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
@@ -242,7 +243,7 @@
 		printk(KERN_WARNING "Ethernet not ready\n");
 }
 
-static struct resource smc911x_resources[] = {
+static struct resource smsc911x_resources[] = {
 	[0] = {
 		.start		= 0xa8000000,
 		.end		= 0xabffffff,
@@ -255,11 +256,21 @@
 	},
 };
 
-static struct platform_device smc911x_device = {
-	.name		= "smc911x",
+static struct smsc911x_platform_config smsc911x_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT,
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
 	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smc911x_resources),
-	.resource	= smc911x_resources,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
 };
 
 static struct resource heartbeat_resources[] = {
@@ -360,7 +371,7 @@
 
 static struct platform_device *mpr2_devices[] __initdata = {
 	&heartbeat_device,
-	&smc911x_device,
+	&smsc911x_device,
 	&flash_device,
 };
 
diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c
index 408bbdd..38a6496 100644
--- a/arch/sh/boards/board-sh7785lcr.c
+++ b/arch/sh/boards/board-sh7785lcr.c
@@ -18,6 +18,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c-pca-platform.h>
 #include <linux/i2c-algo-pca.h>
+#include <linux/irq.h>
 #include <asm/heartbeat.h>
 #include <mach/sh7785lcr.h>
 
diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c
index 806438b..20fe72c 100644
--- a/arch/sh/boards/mach-highlander/setup.c
+++ b/arch/sh/boards/mach-highlander/setup.c
@@ -18,6 +18,7 @@
 #include <linux/ata_platform.h>
 #include <linux/types.h>
 #include <linux/i2c.h>
+#include <linux/irq.h>
 #include <net/ax88796.h>
 #include <asm/machvec.h>
 #include <mach/highlander.h>
diff --git a/arch/sh/boards/mach-hp6xx/setup.c b/arch/sh/boards/mach-hp6xx/setup.c
index 48fece7..746742bd 100644
--- a/arch/sh/boards/mach-hp6xx/setup.c
+++ b/arch/sh/boards/mach-hp6xx/setup.c
@@ -12,9 +12,9 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/irq.h>
 #include <asm/hd64461.h>
 #include <asm/io.h>
-#include <asm/irq.h>
 #include <mach/hp6xx.h>
 #include <cpu/dac.h>
 
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index cc1408119..28e56c5 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -18,9 +18,12 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/gpio.h>
-#include <media/soc_camera_platform.h>
-#include <media/sh_mobile_ceu.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
 #include <video/sh_mobile_lcdc.h>
+#include <media/sh_mobile_ceu.h>
+#include <media/ov772x.h>
+#include <media/tw9910.h>
 #include <asm/clock.h>
 #include <asm/machvec.h>
 #include <asm/io.h>
@@ -292,9 +295,12 @@
 };
 
 static struct clk *camera_clk;
+static DEFINE_MUTEX(camera_lock);
 
-static void camera_power_on(void)
+static void camera_power_on(int is_tw)
 {
+	mutex_lock(&camera_lock);
+
 	/* Use 10 MHz VIO_CKO instead of 24 MHz to work
 	 * around signal quality issues on Panel Board V2.1.
 	 */
@@ -304,6 +310,12 @@
 
 	/* use VIO_RST to take camera out of reset */
 	mdelay(10);
+	if (is_tw) {
+		gpio_set_value(GPIO_PTT2, 0);
+		gpio_set_value(GPIO_PTT0, 0);
+	} else {
+		gpio_set_value(GPIO_PTT0, 1);
+	}
 	gpio_set_value(GPIO_PTT3, 0);
 	mdelay(10);
 	gpio_set_value(GPIO_PTT3, 1);
@@ -316,107 +328,29 @@
 	clk_put(camera_clk);
 
 	gpio_set_value(GPIO_PTT3, 0);
+	mutex_unlock(&camera_lock);
 }
 
-static void camera_power(int mode)
+static int ov7725_power(struct device *dev, int mode)
 {
 	if (mode)
-		camera_power_on();
+		camera_power_on(0);
 	else
 		camera_power_off();
+
+	return 0;
 }
 
-#ifdef CONFIG_I2C
-static unsigned char camera_ov772x_magic[] =
+static int tw9910_power(struct device *dev, int mode)
 {
-	0x09, 0x01, 0x0c, 0x20, 0x0d, 0x41, 0x0e, 0x01,
-	0x12, 0x00, 0x13, 0x8F, 0x14, 0x4A, 0x15, 0x00,
-	0x16, 0x00, 0x17, 0x23, 0x18, 0xa0, 0x19, 0x07,
-	0x1a, 0xf0, 0x1b, 0x40, 0x1f, 0x00, 0x20, 0x10,
-	0x22, 0xff, 0x23, 0x01, 0x28, 0x00, 0x29, 0xa0,
-	0x2a, 0x00, 0x2b, 0x00, 0x2c, 0xf0, 0x2d, 0x00,
-	0x2e, 0x00, 0x30, 0x80, 0x31, 0x60, 0x32, 0x00,
-	0x33, 0x00, 0x34, 0x00, 0x3d, 0x80, 0x3e, 0xe2,
-	0x3f, 0x1f, 0x42, 0x80, 0x43, 0x80, 0x44, 0x80,
-	0x45, 0x80, 0x46, 0x00, 0x47, 0x00, 0x48, 0x00,
-	0x49, 0x50, 0x4a, 0x30, 0x4b, 0x50, 0x4c, 0x50,
-	0x4d, 0x00, 0x4e, 0xef, 0x4f, 0x10, 0x50, 0x60,
-	0x51, 0x00, 0x52, 0x00, 0x53, 0x24, 0x54, 0x7a,
-	0x55, 0xfc, 0x62, 0xff, 0x63, 0xf0, 0x64, 0x1f,
-	0x65, 0x00, 0x66, 0x10, 0x67, 0x00, 0x68, 0x00,
-	0x69, 0x5c, 0x6a, 0x11, 0x6b, 0xa2, 0x6c, 0x01,
-	0x6d, 0x50, 0x6e, 0x80, 0x6f, 0x80, 0x70, 0x0f,
-	0x71, 0x00, 0x72, 0x00, 0x73, 0x0f, 0x74, 0x0f,
-	0x75, 0xff, 0x78, 0x10, 0x79, 0x70, 0x7a, 0x70,
-	0x7b, 0xf0, 0x7c, 0xf0, 0x7d, 0xf0, 0x7e, 0x0e,
-	0x7f, 0x1a, 0x80, 0x31, 0x81, 0x5a, 0x82, 0x69,
-	0x83, 0x75, 0x84, 0x7e, 0x85, 0x88, 0x86, 0x8f,
-	0x87, 0x96, 0x88, 0xa3, 0x89, 0xaf, 0x8a, 0xc4,
-	0x8b, 0xd7, 0x8c, 0xe8, 0x8d, 0x20, 0x8e, 0x00,
-	0x8f, 0x00, 0x90, 0x08, 0x91, 0x10, 0x92, 0x1f,
-	0x93, 0x01, 0x94, 0x2c, 0x95, 0x24, 0x96, 0x08,
-	0x97, 0x14, 0x98, 0x24, 0x99, 0x38, 0x9a, 0x9e,
-	0x9b, 0x00, 0x9c, 0x40, 0x9e, 0x11, 0x9f, 0x02,
-	0xa0, 0x00, 0xa1, 0x40, 0xa2, 0x40, 0xa3, 0x06,
-	0xa4, 0x00, 0xa6, 0x00, 0xa7, 0x40, 0xa8, 0x40,
-	0xa9, 0x80, 0xaa, 0x80, 0xab, 0x06, 0xac, 0xff,
-	0x12, 0x06, 0x64, 0x3f, 0x12, 0x46, 0x17, 0x3f,
-	0x18, 0x50, 0x19, 0x03, 0x1a, 0x78, 0x29, 0x50,
-	0x2c, 0x78,
-};
+	if (mode)
+		camera_power_on(1);
+	else
+		camera_power_off();
 
-static int ov772x_set_capture(struct soc_camera_platform_info *info,
-			      int enable)
-{
-	struct i2c_adapter *a = i2c_get_adapter(0);
-	struct i2c_msg msg;
-	int ret = 0;
-	int i;
-
-	if (!enable)
-		return 0; /* camera_power_off() is enough */
-
-	for (i = 0; i < ARRAY_SIZE(camera_ov772x_magic); i += 2) {
-		u_int8_t buf[8];
-
-		msg.addr = 0x21;
-		msg.buf = buf;
-		msg.len = 2;
-		msg.flags = 0;
-
-		buf[0] = camera_ov772x_magic[i];
-		buf[1] = camera_ov772x_magic[i + 1];
-
-		ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1);
-	}
-
-	return ret;
+	return 0;
 }
 
-static struct soc_camera_platform_info ov772x_info = {
-	.iface = 0,
-	.format_name = "RGB565",
-	.format_depth = 16,
-	.format = {
-		.pixelformat = V4L2_PIX_FMT_RGB565,
-		.colorspace = V4L2_COLORSPACE_SRGB,
-		.width = 320,
-		.height = 240,
-	},
-	.bus_param =  SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
-	SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
-	.power = camera_power,
-	.set_capture = ov772x_set_capture,
-};
-
-static struct platform_device migor_camera_device = {
-	.name		= "soc_camera_platform",
-	.dev	= {
-		.platform_data	= &ov772x_info,
-	},
-};
-#endif /* CONFIG_I2C */
-
 static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
 	.flags = SOCAM_MASTER | SOCAM_DATAWIDTH_8 | SOCAM_PCLK_SAMPLE_RISING \
 	| SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH,
@@ -448,16 +382,43 @@
 	},
 };
 
+static struct ov772x_camera_info ov7725_info = {
+	.buswidth  = SOCAM_DATAWIDTH_8,
+	.link = {
+		.power  = ov7725_power,
+	},
+};
+
+static struct tw9910_video_info tw9910_info = {
+	.buswidth = SOCAM_DATAWIDTH_8,
+	.mpout    = TW9910_MPO_FIELD,
+	.link = {
+		.power  = tw9910_power,
+	}
+};
+
+struct spi_gpio_platform_data sdcard_cn9_platform_data = {
+	.sck = GPIO_PTD0,
+	.mosi = GPIO_PTD1,
+	.miso = GPIO_PTD2,
+	.num_chipselect = 1,
+};
+
+static struct platform_device sdcard_cn9_device = {
+	.name		= "spi_gpio",
+	.dev	= {
+		.platform_data	= &sdcard_cn9_platform_data,
+	},
+};
+
 static struct platform_device *migor_devices[] __initdata = {
 	&smc91x_eth_device,
 	&sh_keysc_device,
 	&migor_lcdc_device,
 	&migor_ceu_device,
-#ifdef CONFIG_I2C
-	&migor_camera_device,
-#endif
 	&migor_nor_flash_device,
 	&migor_nand_flash_device,
+	&sdcard_cn9_device,
 };
 
 static struct i2c_board_info migor_i2c_devices[] = {
@@ -468,6 +429,23 @@
 		I2C_BOARD_INFO("migor_ts", 0x51),
 		.irq = 38, /* IRQ6 */
 	},
+	{
+		I2C_BOARD_INFO("ov772x", 0x21),
+		.platform_data = &ov7725_info,
+	},
+	{
+		I2C_BOARD_INFO("tw9910", 0x45),
+		.platform_data = &tw9910_info,
+	},
+};
+
+static struct spi_board_info migor_spi_devices[] = {
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 5000000,
+		.chip_select = 0,
+		.controller_data = (void *) GPIO_PTD5,
+	},
 };
 
 static int __init migor_devices_setup(void)
@@ -592,6 +570,9 @@
 	i2c_register_board_info(0, migor_i2c_devices,
 				ARRAY_SIZE(migor_i2c_devices));
 
+	spi_register_board_info(migor_spi_devices,
+				ARRAY_SIZE(migor_spi_devices));
+
 	return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
 }
 __initcall(migor_devices_setup);
diff --git a/arch/sh/boards/mach-rsk/devices-rsk7203.c b/arch/sh/boards/mach-rsk/devices-rsk7203.c
index 73f743b..d8a65ea 100644
--- a/arch/sh/boards/mach-rsk/devices-rsk7203.c
+++ b/arch/sh/boards/mach-rsk/devices-rsk7203.c
@@ -15,19 +15,21 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/map.h>
-#include <linux/smc911x.h>
+#include <linux/smsc911x.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
 #include <asm/machvec.h>
 #include <asm/io.h>
 #include <cpu/sh7203.h>
 
-static struct smc911x_platdata smc911x_info = {
-	.flags		= SMC911X_USE_16BIT,
-	.irq_flags	= IRQF_TRIGGER_LOW,
+static struct smsc911x_platform_config smsc911x_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_16BIT,
 };
 
-static struct resource smc911x_resources[] = {
+static struct resource smsc911x_resources[] = {
 	[0] = {
 		.start		= 0x24000000,
 		.end		= 0x24000000 + 0x100,
@@ -40,13 +42,13 @@
 	},
 };
 
-static struct platform_device smc911x_device = {
-	.name		= "smc911x",
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
 	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smc911x_resources),
-	.resource	= smc911x_resources,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
 	.dev		= {
-		.platform_data = &smc911x_info,
+		.platform_data = &smsc911x_config,
 	},
 };
 
@@ -87,7 +89,7 @@
 };
 
 static struct platform_device *rsk7203_devices[] __initdata = {
-	&smc911x_device,
+	&smsc911x_device,
 	&led_device,
 };
 
diff --git a/arch/sh/boards/mach-x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c
index a70d23b..a340492 100644
--- a/arch/sh/boards/mach-x3proto/setup.c
+++ b/arch/sh/boards/mach-x3proto/setup.c
@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <linux/smc91x.h>
+#include <linux/irq.h>
 #include <asm/ilsel.h>
 
 static struct resource heartbeat_resources[] = {
diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig
index 874dd97..5c423fa 100644
--- a/arch/sh/configs/ap325rxa_defconfig
+++ b/arch/sh/configs/ap325rxa_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Tue Oct 21 18:20:06 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 16:54:19 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -75,12 +77,10 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -90,7 +90,6 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -98,11 +97,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -119,6 +116,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -128,6 +129,7 @@
 CONFIG_CPU_SH4A=y
 CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -192,7 +194,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -269,7 +270,6 @@
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 
 #
@@ -293,11 +293,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -353,6 +360,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -368,8 +376,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -447,6 +455,8 @@
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -472,7 +482,15 @@
 #
 # UBI - Unsorted block images
 #
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
@@ -487,7 +505,9 @@
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -530,6 +550,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
@@ -541,13 +562,34 @@
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_SMC91X is not set
-CONFIG_SMC911X=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -630,6 +672,7 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -637,19 +680,102 @@
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_SH_MOBILE=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+# CONFIG_SPI_SH_SCI is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -658,8 +784,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -668,13 +799,47 @@
 #
 # Multimedia core support
 #
-# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+CONFIG_VIDEO_V4L1_COMPAT=y
 # CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
+CONFIG_VIDEO_MEDIA=y
 
 #
 # Multimedia drivers
 #
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_CONTIG=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+CONFIG_SOC_CAMERA=y
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+# CONFIG_SOC_CAMERA_MT9M111 is not set
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
+CONFIG_SOC_CAMERA_PLATFORM=y
+# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_VIDEO_SH_MOBILE_CEU=y
+# CONFIG_RADIO_ADAPTERS is not set
 # CONFIG_DAB is not set
 
 #
@@ -682,7 +847,34 @@
 #
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_IMAGEBLIT=y
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_SH_MOBILE_LCDC=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -694,14 +886,103 @@
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_LOGO_SUPERH_MONO=y
+CONFIG_LOGO_SUPERH_VGA16=y
+CONFIG_LOGO_SUPERH_CLUT224=y
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_SPI=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SH is not set
 # CONFIG_DMADEVICES is not set
 CONFIG_UIO=y
 # CONFIG_UIO_PDRV is not set
@@ -768,10 +1049,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -780,6 +1058,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_UBIFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -878,13 +1157,19 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -900,11 +1185,14 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -987,12 +1275,13 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
+CONFIG_CRC7=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
diff --git a/arch/sh/configs/cayman_defconfig b/arch/sh/configs/cayman_defconfig
index e21c0e8..9289501 100644
--- a/arch/sh/configs/cayman_defconfig
+++ b/arch/sh/configs/cayman_defconfig
@@ -700,8 +700,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig
index be4c2e0..2d86e04 100644
--- a/arch/sh/configs/dreamcast_defconfig
+++ b/arch/sh/configs/dreamcast_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:18:02 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 16:54:55 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -78,7 +80,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -90,7 +91,6 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -98,11 +98,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -119,6 +117,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -126,6 +128,7 @@
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -195,7 +198,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -290,7 +292,6 @@
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
 
@@ -310,6 +311,7 @@
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
@@ -322,11 +324,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -379,6 +388,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -394,8 +404,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -434,6 +444,7 @@
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -477,6 +488,7 @@
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -492,7 +504,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -506,6 +517,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -611,6 +623,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -643,11 +656,11 @@
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -657,7 +670,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -732,6 +745,7 @@
 # CONFIG_FB_SH_MOBILE_LCDC is not set
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -788,9 +802,10 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -847,10 +862,7 @@
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -901,13 +913,19 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -923,6 +941,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1006,6 +1025,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/edosk7705_defconfig b/arch/sh/configs/edosk7705_defconfig
index 8f4329f..461bfb35 100644
--- a/arch/sh/configs/edosk7705_defconfig
+++ b/arch/sh/configs/edosk7705_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc6
-# Wed Dec 17 13:53:02 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 16:55:29 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -64,7 +64,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -72,11 +71,14 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 # CONFIG_BLOCK is not set
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -151,7 +153,6 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -362,7 +363,6 @@
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -382,10 +382,7 @@
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_NLS is not set
 
 #
@@ -426,6 +423,7 @@
 #
 # Library routines
 #
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/edosk7760_defconfig b/arch/sh/configs/edosk7760_defconfig
index 1580068..14d4b35 100644
--- a/arch/sh/configs/edosk7760_defconfig
+++ b/arch/sh/configs/edosk7760_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:20:09 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 16:55:48 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -59,6 +61,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -75,13 +78,11 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -92,7 +93,6 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -100,11 +100,9 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -121,6 +119,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -128,6 +130,7 @@
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -191,7 +194,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -272,7 +274,6 @@
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
 
@@ -298,11 +299,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -353,6 +361,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -368,8 +377,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -510,6 +519,7 @@
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -592,6 +602,7 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -632,8 +643,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -651,11 +662,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -664,9 +675,12 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -693,15 +707,16 @@
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
 # CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
 # CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -716,6 +731,7 @@
 # CONFIG_FB_SH7760 is not set
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -737,6 +753,7 @@
 # CONFIG_SND_SEQUENCER is not set
 # CONFIG_SND_MIXER_OSS is not set
 # CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
 # CONFIG_SND_VERBOSE_PROCFS is not set
@@ -753,6 +770,7 @@
 #
 # SoC Audio support for SuperH
 #
+CONFIG_SND_SOC_I2C_AND_SPI=y
 # CONFIG_SND_SOC_ALL_CODECS is not set
 # CONFIG_SOUND_PRIME is not set
 # CONFIG_HID_SUPPORT is not set
@@ -823,10 +841,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -950,6 +965,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -958,17 +974,25 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
@@ -978,7 +1002,9 @@
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
+CONFIG_DUMP_CODE=y
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -994,7 +1020,11 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1077,6 +1107,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/hp6xx_defconfig b/arch/sh/configs/hp6xx_defconfig
index 1032b23..847a251 100644
--- a/arch/sh/configs/hp6xx_defconfig
+++ b/arch/sh/configs/hp6xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:23:53 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 16:56:55 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,7 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_SYS_SUPPORTS_PM=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -70,12 +71,10 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -85,13 +84,11 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -108,6 +105,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_FREEZER=y
 
 #
@@ -115,6 +116,7 @@
 #
 CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -178,7 +180,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -236,7 +237,6 @@
 #
 CONFIG_HD6446X_SERIES=y
 CONFIG_HD64461=y
-# CONFIG_HD64465 is not set
 CONFIG_HD64461_IRQ=36
 CONFIG_HD64461_IOBASE=0xb0000000
 CONFIG_HD64461_ENABLER=y
@@ -275,7 +275,6 @@
 #
 # Bus options
 #
-CONFIG_ISA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
@@ -286,9 +285,6 @@
 #
 # PC-card bridges
 #
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
-CONFIG_PCMCIA_PROBE=y
 
 #
 # Executable file formats
@@ -301,13 +297,13 @@
 #
 # Power management options (EXPERIMENTAL)
 #
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
+# CONFIG_CPU_IDLE is not set
 # CONFIG_NET is not set
 
 #
@@ -326,7 +322,6 @@
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_MTD is not set
 # CONFIG_PARPORT is not set
-# CONFIG_PNP is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
@@ -336,6 +331,7 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -375,18 +371,7 @@
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
+# CONFIG_LIBFC is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 # CONFIG_SCSI_DH is not set
@@ -395,10 +380,7 @@
 CONFIG_SATA_PMP=y
 CONFIG_ATA_SFF=y
 # CONFIG_SATA_MV is not set
-# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_PCMCIA is not set
-# CONFIG_PATA_QDI is not set
-# CONFIG_PATA_WINBOND_VLB is not set
 CONFIG_PATA_PLATFORM=y
 # CONFIG_MD is not set
 # CONFIG_PHONE is not set
@@ -438,11 +420,11 @@
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 CONFIG_TOUCHSCREEN_HP600=y
-# CONFIG_TOUCHSCREEN_HTCPEN is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
@@ -484,11 +466,11 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=64
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
 #
@@ -499,7 +481,6 @@
 # CONFIG_CARDMAN_4040 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
 # CONFIG_W1 is not set
@@ -508,11 +489,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -522,7 +503,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -552,11 +533,12 @@
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_IMAGEBLIT=y
 # CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -571,6 +553,7 @@
 CONFIG_FB_SH_MOBILE_LCDC=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 # CONFIG_LCD_ILI9320 is not set
@@ -587,7 +570,6 @@
 #
 # Console display driver support
 #
-# CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
@@ -701,10 +683,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -785,13 +764,19 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -807,11 +792,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -893,6 +882,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig
index b82dfb4..d3bbbb0 100644
--- a/arch/sh/configs/landisk_defconfig
+++ b/arch/sh/configs/landisk_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:25:51 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 16:58:46 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -76,7 +78,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -87,7 +88,6 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -95,11 +95,9 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -116,6 +114,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -123,6 +125,7 @@
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -186,7 +189,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -285,6 +287,7 @@
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 CONFIG_PCCARD=y
@@ -315,11 +318,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -401,6 +411,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -416,8 +427,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -462,6 +473,7 @@
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -478,7 +490,6 @@
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDESCSI=y
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -508,6 +519,7 @@
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -560,6 +572,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -573,6 +586,8 @@
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -634,6 +649,7 @@
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -649,7 +665,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -659,6 +674,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -687,6 +703,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -695,6 +712,7 @@
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
@@ -791,6 +809,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -832,11 +851,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -846,7 +865,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -952,11 +971,9 @@
 CONFIG_HID_A4TECH=m
 CONFIG_HID_APPLE=m
 CONFIG_HID_BELKIN=m
-CONFIG_HID_BRIGHT=m
 CONFIG_HID_CHERRY=m
 CONFIG_HID_CHICONY=m
 CONFIG_HID_CYPRESS=m
-CONFIG_HID_DELL=m
 CONFIG_HID_EZKEY=m
 CONFIG_HID_GYRATION=m
 CONFIG_HID_LOGITECH=m
@@ -964,12 +981,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=m
 CONFIG_HID_MONTEREY=m
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=m
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=m
 CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -990,6 +1010,8 @@
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -1007,6 +1029,8 @@
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -1017,11 +1041,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1119,6 +1143,7 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1192,10 +1217,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1302,14 +1324,20 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1325,6 +1353,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1408,6 +1437,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig
index c3ecedf..d5c5a1d 100644
--- a/arch/sh/configs/lboxre2_defconfig
+++ b/arch/sh/configs/lboxre2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:29:42 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:02:46 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -76,7 +78,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -87,7 +88,6 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -95,11 +95,9 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -116,6 +114,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -123,6 +125,7 @@
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -186,7 +189,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -286,6 +288,7 @@
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 CONFIG_PCCARD=y
@@ -315,11 +318,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -399,6 +409,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -414,8 +425,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -459,6 +470,7 @@
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -501,6 +513,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -514,6 +527,8 @@
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -627,6 +642,7 @@
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -642,7 +658,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -656,6 +671,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -684,6 +700,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -692,6 +709,7 @@
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
@@ -787,6 +805,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -828,11 +847,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -842,7 +861,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -902,9 +921,10 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1007,10 +1027,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1100,14 +1117,20 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1123,6 +1146,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1206,6 +1230,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/magicpanelr2_defconfig b/arch/sh/configs/magicpanelr2_defconfig
index 499ed72..125d801 100644
--- a/arch/sh/configs/magicpanelr2_defconfig
+++ b/arch/sh/configs/magicpanelr2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:32:23 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:03:37 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -58,6 +60,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -74,12 +77,10 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -90,7 +91,6 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -98,11 +98,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -119,6 +117,10 @@
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -126,6 +128,7 @@
 #
 CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -189,7 +192,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -296,11 +298,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -351,6 +360,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -366,8 +376,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -483,6 +493,7 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -502,13 +513,33 @@
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_SMC91X is not set
-CONFIG_SMC911X=y
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -618,6 +649,7 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -627,17 +659,37 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -647,7 +699,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -778,10 +830,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -912,6 +961,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -920,16 +970,24 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xa4430000
@@ -939,25 +997,9 @@
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_IRQSTACKS is not set
-CONFIG_SH_KGDB=y
-
-#
-# KGDB configuration options
-#
+CONFIG_DUMP_CODE=y
+# CONFIG_SH_NO_BSS_INIT is not set
 # CONFIG_MORE_COMPILE_OPTIONS is not set
-# CONFIG_KGDB_NMI is not set
-CONFIG_KGDB_SYSRQ=y
-
-#
-# Serial port setup
-#
-CONFIG_KGDB_DEFPORT=0
-CONFIG_KGDB_DEFBAUD=115200
-CONFIG_KGDB_DEFPARITY_N=y
-# CONFIG_KGDB_DEFPARITY_E is not set
-# CONFIG_KGDB_DEFPARITY_O is not set
-CONFIG_KGDB_DEFBITS_8=y
-# CONFIG_KGDB_DEFBITS_7 is not set
 
 #
 # Security options
@@ -972,6 +1014,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig
index b8ada8c..5a1c048 100644
--- a/arch/sh/configs/microdev_defconfig
+++ b/arch/sh/configs/microdev_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:37:41 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:06:47 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -72,12 +74,10 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -87,13 +87,11 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -110,6 +108,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -117,6 +119,7 @@
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -186,7 +189,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -265,7 +267,6 @@
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
 
@@ -292,11 +293,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_PACKET is not set
 # CONFIG_UNIX is not set
 CONFIG_XFRM=y
@@ -351,6 +359,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -366,8 +375,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -400,12 +409,14 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
 CONFIG_IDE_GD_ATA=y
@@ -445,6 +456,7 @@
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -503,6 +515,7 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -530,11 +543,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -544,7 +557,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -588,7 +601,7 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
@@ -656,10 +669,7 @@
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -761,13 +771,19 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -783,11 +799,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -869,6 +889,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index 30cac42..7758263 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Fri Oct 31 15:58:06 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:09:35 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -77,6 +79,7 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -89,18 +92,15 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -117,6 +117,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -127,6 +131,7 @@
 CONFIG_CPU_SH4AL_DSP=y
 CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -196,7 +201,6 @@
 # CONFIG_MEMORY_HOTPLUG is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_MIGRATION is not set
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -299,11 +303,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -359,6 +370,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -375,8 +387,8 @@
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -493,7 +505,9 @@
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -536,6 +550,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
@@ -554,6 +569,7 @@
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -644,6 +660,7 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -684,8 +701,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -697,17 +714,39 @@
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -716,10 +755,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -762,8 +804,11 @@
 CONFIG_SOC_CAMERA=y
 # CONFIG_SOC_CAMERA_MT9M001 is not set
 # CONFIG_SOC_CAMERA_MT9M111 is not set
+# CONFIG_SOC_CAMERA_MT9T031 is not set
 # CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
 CONFIG_SOC_CAMERA_PLATFORM=y
+# CONFIG_SOC_CAMERA_OV772X is not set
 CONFIG_VIDEO_SH_MOBILE_CEU=y
 # CONFIG_RADIO_ADAPTERS is not set
 # CONFIG_DAB is not set
@@ -806,7 +851,7 @@
 # CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -872,6 +917,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -948,10 +994,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1008,19 +1051,29 @@
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000
 CONFIG_EARLY_PRINTK=y
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1035,12 +1088,13 @@
 # Crypto core or helper
 #
 # CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1123,6 +1177,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig
index 2e65149..65b01a9 100644
--- a/arch/sh/configs/r7780mp_defconfig
+++ b/arch/sh/configs/r7780mp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 20:03:46 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:10:19 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -85,6 +87,7 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
@@ -96,7 +99,6 @@
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -104,11 +106,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -125,6 +125,10 @@
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -133,6 +137,7 @@
 CONFIG_CPU_SH4=y
 CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -203,7 +208,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -284,7 +288,6 @@
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 
 #
@@ -302,6 +305,7 @@
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
@@ -315,11 +319,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -382,6 +393,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -398,8 +410,8 @@
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -442,8 +454,10 @@
 CONFIG_EEPROM_93CX6=y
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -486,6 +500,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -499,6 +514,8 @@
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -611,6 +628,7 @@
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -626,7 +644,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -640,6 +657,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 CONFIG_VIA_RHINE=m
@@ -669,6 +687,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -677,6 +696,7 @@
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
@@ -771,6 +791,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -836,8 +857,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -861,6 +882,7 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
@@ -909,11 +931,11 @@
 CONFIG_THERMAL=y
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -922,9 +944,12 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -982,9 +1007,10 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1020,6 +1046,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1106,10 +1133,7 @@
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1228,6 +1252,7 @@
 # CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
@@ -1236,6 +1261,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1244,16 +1270,28 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 CONFIG_EARLY_PRINTK=y
@@ -1262,7 +1300,9 @@
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
+CONFIG_DUMP_CODE=y
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1278,11 +1318,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1366,6 +1410,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig
index 043a8a5..8defaa5 100644
--- a/arch/sh/configs/r7785rp_defconfig
+++ b/arch/sh/configs/r7785rp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 16:25:30 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:14:41 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,9 +13,11 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
@@ -63,6 +65,7 @@
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -84,6 +87,7 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -97,7 +101,6 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -105,11 +108,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -126,6 +127,11 @@
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 # CONFIG_CLASSIC_RCU is not set
+# CONFIG_TREE_RCU is not set
+CONFIG_PREEMPT_RCU=y
+CONFIG_RCU_TRACE=y
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_PREEMPT_RCU_TRACE=y
 # CONFIG_FREEZER is not set
 
 #
@@ -135,6 +141,7 @@
 CONFIG_CPU_SH4A=y
 CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -211,7 +218,6 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -307,8 +313,6 @@
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_RCU=y
-CONFIG_RCU_TRACE=y
 CONFIG_GUSA=y
 
 #
@@ -326,6 +330,7 @@
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
@@ -339,11 +344,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -406,6 +418,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -423,8 +436,8 @@
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -467,8 +480,10 @@
 CONFIG_EEPROM_93CX6=y
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -511,6 +526,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -524,6 +540,8 @@
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -636,6 +654,7 @@
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -671,6 +690,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -679,6 +699,7 @@
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
@@ -732,6 +753,7 @@
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
@@ -773,6 +795,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -812,6 +835,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_HIGHLANDER=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SH_MOBILE is not set
@@ -838,8 +862,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -851,6 +875,30 @@
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -863,6 +911,7 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
@@ -911,11 +960,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -924,9 +973,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -954,15 +1007,16 @@
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
 # CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
 # CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -1000,6 +1054,7 @@
 CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -1034,9 +1089,10 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1072,6 +1128,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1158,10 +1215,7 @@
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1291,6 +1345,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
@@ -1300,16 +1355,28 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 CONFIG_EARLY_PRINTK=y
@@ -1318,7 +1385,9 @@
 CONFIG_DEBUG_STACK_USAGE=y
 CONFIG_4KSTACKS=y
 # CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
+CONFIG_DUMP_CODE=y
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1334,11 +1403,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1422,6 +1495,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/rsk7201_defconfig b/arch/sh/configs/rsk7201_defconfig
index 014c18c..64ee69e 100644
--- a/arch/sh/configs/rsk7201_defconfig
+++ b/arch/sh/configs/rsk7201_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc6
-# Mon Dec  8 14:48:02 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:19:04 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -77,6 +77,7 @@
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -87,18 +88,15 @@
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -115,6 +113,10 @@
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -185,7 +187,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -563,7 +564,6 @@
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -606,10 +606,7 @@
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -658,22 +655,28 @@
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
 
 #
 # Tracers
 #
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -688,6 +691,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig
index dcdef31..8d7a597 100644
--- a/arch/sh/configs/rsk7203_defconfig
+++ b/arch/sh/configs/rsk7203_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc6
-# Mon Dec  8 14:35:03 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:20:31 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -62,6 +62,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -81,6 +82,7 @@
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -91,18 +93,15 @@
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -119,6 +118,10 @@
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -189,7 +192,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -313,6 +315,8 @@
 #
 # Networking options
 #
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_PACKET is not set
 # CONFIG_UNIX is not set
 # CONFIG_NET_KEY is not set
@@ -361,6 +365,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -376,8 +381,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -509,13 +514,33 @@
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_SMC91X is not set
-CONFIG_SMC911X=y
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -611,6 +636,26 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -685,11 +730,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -697,12 +740,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -847,7 +893,6 @@
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -890,10 +935,7 @@
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -961,6 +1003,7 @@
 # CONFIG_DEBUG_OBJECTS_SELFTEST is not set
 # CONFIG_DEBUG_OBJECTS_FREE is not set
 # CONFIG_DEBUG_OBJECTS_TIMERS is not set
+CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -970,6 +1013,7 @@
 # CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
@@ -978,6 +1022,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 CONFIG_DEBUG_LIST=y
 CONFIG_DEBUG_SG=y
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -986,9 +1031,12 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
 
 #
 # Tracers
@@ -997,9 +1045,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe8000
@@ -1008,6 +1060,9 @@
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_IRQSTACKS is not set
+CONFIG_DUMP_CODE=y
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1022,6 +1077,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig
index 7d2a9e8..d6680f4 100644
--- a/arch/sh/configs/rts7751r2d1_defconfig
+++ b/arch/sh/configs/rts7751r2d1_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:44:36 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:23:15 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -77,6 +79,7 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -89,18 +92,15 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -117,6 +117,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -124,6 +128,7 @@
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -187,7 +192,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -293,6 +297,7 @@
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
@@ -308,11 +313,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -365,6 +377,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -381,8 +394,8 @@
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -426,6 +439,7 @@
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -468,6 +482,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -481,6 +496,8 @@
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -593,6 +610,7 @@
 # CONFIG_SMC91X is not set
 # CONFIG_ENC28J60 is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -608,7 +626,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -622,6 +639,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -650,6 +668,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -658,6 +677,7 @@
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
@@ -755,6 +775,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -777,7 +798,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
@@ -805,11 +826,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -819,7 +840,7 @@
 CONFIG_MFD_SM501=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -852,11 +873,12 @@
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
 # CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -895,6 +917,7 @@
 CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -1031,11 +1054,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -1043,12 +1064,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -1069,6 +1093,8 @@
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 # CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -1084,6 +1110,8 @@
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -1094,11 +1122,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1151,6 +1179,7 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1176,6 +1205,7 @@
 #
 # CONFIG_RTC_DRV_M41T94 is not set
 # CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 CONFIG_RTC_DRV_R9701=y
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1254,10 +1284,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1343,19 +1370,29 @@
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
 CONFIG_EARLY_PRINTK=y
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1371,6 +1408,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1454,6 +1492,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig
index f680d3e..3fca10e 100644
--- a/arch/sh/configs/rts7751r2dplus_defconfig
+++ b/arch/sh/configs/rts7751r2dplus_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:47:39 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:26:10 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -77,6 +79,7 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -89,18 +92,15 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -117,6 +117,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -124,6 +128,7 @@
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -187,7 +192,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -293,6 +297,7 @@
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
@@ -308,11 +313,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -365,6 +377,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -381,8 +394,8 @@
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -426,6 +439,7 @@
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -468,6 +482,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -481,6 +496,8 @@
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -593,6 +610,7 @@
 # CONFIG_SMC91X is not set
 # CONFIG_ENC28J60 is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -608,7 +626,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -622,6 +639,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -650,6 +668,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -658,6 +677,7 @@
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
@@ -755,6 +775,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -777,7 +798,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
@@ -805,11 +826,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -819,7 +840,7 @@
 CONFIG_MFD_SM501=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -852,11 +873,12 @@
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
 # CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -895,6 +917,7 @@
 CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -1031,11 +1054,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -1043,12 +1064,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -1069,6 +1093,8 @@
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 # CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -1084,6 +1110,8 @@
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -1094,11 +1122,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1151,6 +1179,7 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1176,6 +1205,7 @@
 #
 # CONFIG_RTC_DRV_M41T94 is not set
 # CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 CONFIG_RTC_DRV_R9701=y
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1254,10 +1284,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1343,19 +1370,29 @@
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
 CONFIG_EARLY_PRINTK=y
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1371,6 +1408,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1454,6 +1492,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/sdk7780_defconfig b/arch/sh/configs/sdk7780_defconfig
index 543287b..5d6b067 100644
--- a/arch/sh/configs/sdk7780_defconfig
+++ b/arch/sh/configs/sdk7780_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:53:22 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:26:40 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -59,6 +61,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -81,7 +84,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -92,7 +94,6 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -100,11 +101,9 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -121,6 +120,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -129,6 +132,7 @@
 CONFIG_CPU_SH4=y
 CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -199,7 +203,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -282,7 +285,6 @@
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 
 #
@@ -300,6 +302,7 @@
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 CONFIG_PCI_DEBUG=y
@@ -334,11 +337,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -434,6 +444,7 @@
 # CONFIG_NET_SCH_GRED is not set
 # CONFIG_NET_SCH_DSMARK is not set
 # CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
 
 #
 # Classification
@@ -449,6 +460,7 @@
 # CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -464,8 +476,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -516,6 +528,7 @@
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
 CONFIG_IDE_GD_ATA=y
@@ -525,7 +538,6 @@
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -553,6 +565,7 @@
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -619,6 +632,8 @@
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -742,6 +757,7 @@
 # CONFIG_NET_VENDOR_3COM is not set
 CONFIG_SMC91X=y
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -826,6 +842,7 @@
 CONFIG_MOUSE_PS2_SYNAPTICS=y
 CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
@@ -875,6 +892,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_PRINTER is not set
@@ -905,11 +923,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 CONFIG_SSB=y
 CONFIG_SSB_SPROM=y
 CONFIG_SSB_PCIHOST_POSSIBLE=y
@@ -929,7 +947,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -957,15 +975,16 @@
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
 # CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
 # CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -1003,6 +1022,7 @@
 CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -1054,11 +1074,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -1066,12 +1084,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -1092,6 +1113,8 @@
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -1106,6 +1129,8 @@
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -1116,11 +1141,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1176,6 +1201,7 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
@@ -1260,10 +1286,7 @@
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1392,6 +1415,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1400,17 +1424,25 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
@@ -1419,7 +1451,9 @@
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
+CONFIG_DUMP_CODE=y
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1435,7 +1469,11 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1519,6 +1557,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
index 25717ff..e5b55b6 100644
--- a/arch/sh/configs/se7206_defconfig
+++ b/arch/sh/configs/se7206_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:57:39 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:31:27 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 # CONFIG_GENERIC_TIME is not set
 # CONFIG_GENERIC_CLOCKEVENTS is not set
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -69,6 +71,7 @@
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -84,11 +87,11 @@
 CONFIG_EVENTFD=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -99,7 +102,6 @@
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -107,11 +109,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -128,6 +128,11 @@
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 # CONFIG_CLASSIC_RCU is not set
+# CONFIG_TREE_RCU is not set
+CONFIG_PREEMPT_RCU=y
+CONFIG_RCU_TRACE=y
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_PREEMPT_RCU_TRACE=y
 # CONFIG_FREEZER is not set
 
 #
@@ -136,6 +141,7 @@
 CONFIG_CPU_SH2=y
 CONFIG_CPU_SH2A=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 CONFIG_CPU_SUBTYPE_SH7206=y
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -197,7 +203,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -281,8 +286,6 @@
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_RCU=y
-CONFIG_RCU_TRACE=y
 CONFIG_GUSA=y
 
 #
@@ -296,10 +299,6 @@
 #
 # Bus options
 #
-CONFIG_CF_ENABLER=y
-# CONFIG_CF_AREA5 is not set
-CONFIG_CF_AREA6=y
-CONFIG_CF_BASE_ADDR=0xb8000000
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
@@ -312,11 +311,19 @@
 CONFIG_BINFMT_SHARED_FLAT=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -372,6 +379,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -387,8 +395,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -500,6 +508,7 @@
 CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_93CX6=y
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -526,6 +535,7 @@
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -598,11 +608,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -612,7 +622,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -732,10 +742,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -812,6 +819,7 @@
 # CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
@@ -820,6 +828,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 CONFIG_DEBUG_LIST=y
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -827,20 +836,35 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_DEBUG_BOOTMEM is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_IRQSTACKS is not set
+CONFIG_DUMP_CODE=y
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -856,7 +880,11 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -890,7 +918,7 @@
 #
 # Digest
 #
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -939,6 +967,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig
index be246f3..3900525 100644
--- a/arch/sh/configs/se7343_defconfig
+++ b/arch/sh/configs/se7343_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc6
-# Thu Dec  4 16:40:25 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:33:53 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -78,7 +80,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -88,7 +89,6 @@
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -96,11 +96,9 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -117,6 +115,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -190,7 +192,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -280,7 +281,6 @@
 #
 # Bus options
 #
-# CONFIG_CF_ENABLER is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
@@ -291,11 +291,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -347,6 +354,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -362,8 +370,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -661,8 +669,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -693,6 +701,7 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
@@ -743,11 +752,13 @@
 # CONFIG_USB_VIDEO_CLASS is not set
 CONFIG_USB_GSPCA=m
 # CONFIG_USB_M5602 is not set
+# CONFIG_USB_STV06XX is not set
 # CONFIG_USB_GSPCA_CONEX is not set
 # CONFIG_USB_GSPCA_ETOMS is not set
 # CONFIG_USB_GSPCA_FINEPIX is not set
 # CONFIG_USB_GSPCA_MARS is not set
 # CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
 # CONFIG_USB_GSPCA_PAC207 is not set
 # CONFIG_USB_GSPCA_PAC7311 is not set
 # CONFIG_USB_GSPCA_SONIXB is not set
@@ -786,6 +797,7 @@
 # CONFIG_USB_DSBR is not set
 # CONFIG_USB_SI470X is not set
 # CONFIG_USB_MR800 is not set
+# CONFIG_RADIO_TEA5764 is not set
 # CONFIG_DAB is not set
 
 #
@@ -797,15 +809,16 @@
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
 # CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
 # CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -881,11 +894,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -893,12 +904,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 # CONFIG_THRUSTMASTER_FF is not set
 # CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
@@ -997,7 +1011,6 @@
 # CONFIG_UIO_SMX is not set
 # CONFIG_UIO_SERCOS3 is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -1051,10 +1064,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1138,11 +1148,12 @@
 #
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000
 CONFIG_EARLY_PRINTK=y
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1158,6 +1169,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1240,6 +1252,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/se7619_defconfig b/arch/sh/configs/se7619_defconfig
index db9cacd..932b023 100644
--- a/arch/sh/configs/se7619_defconfig
+++ b/arch/sh/configs/se7619_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:03:29 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:36:46 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 # CONFIG_GENERIC_TIME is not set
 # CONFIG_GENERIC_CLOCKEVENTS is not set
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -61,12 +63,10 @@
 CONFIG_EVENTFD=y
 CONFIG_AIO=y
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
@@ -74,12 +74,10 @@
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -96,6 +94,10 @@
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -103,6 +105,7 @@
 #
 CONFIG_CPU_SH2=y
 CONFIG_CPU_SUBTYPE_SH7619=y
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -164,7 +167,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -244,7 +246,6 @@
 #
 # Bus options
 #
-# CONFIG_CF_ENABLER is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
@@ -256,6 +257,12 @@
 # CONFIG_BINFMT_SHARED_FLAT is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 # CONFIG_NET is not set
 
 #
@@ -359,6 +366,7 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -439,11 +447,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -453,7 +461,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -506,7 +514,7 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
@@ -557,10 +565,7 @@
 # CONFIG_SYSFS is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -602,12 +607,19 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -621,6 +633,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/se7705_defconfig b/arch/sh/configs/se7705_defconfig
index d88190f..8574d6e 100644
--- a/arch/sh/configs/se7705_defconfig
+++ b/arch/sh/configs/se7705_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:04:52 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:37:50 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -68,12 +70,10 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -83,17 +83,14 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -110,6 +107,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -117,6 +118,7 @@
 #
 CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -180,7 +182,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -258,7 +259,6 @@
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
 
@@ -272,10 +272,6 @@
 #
 # Bus options
 #
-CONFIG_CF_ENABLER=y
-# CONFIG_CF_AREA5 is not set
-CONFIG_CF_AREA6=y
-CONFIG_CF_BASE_ADDR=0xb8000000
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
@@ -285,11 +281,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -345,6 +348,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -360,8 +364,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -465,6 +469,7 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -491,6 +496,7 @@
 CONFIG_STNIC=y
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -583,6 +589,7 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
@@ -609,11 +616,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -623,7 +630,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -677,7 +684,7 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
@@ -734,10 +741,7 @@
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -806,13 +810,19 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -827,6 +837,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -909,6 +920,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig
index 869ab17..e31ea84 100644
--- a/arch/sh/configs/se7712_defconfig
+++ b/arch/sh/configs/se7712_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:08:12 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:40:12 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -15,6 +15,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -55,6 +57,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -71,12 +74,10 @@
 # CONFIG_SHMEM is not set
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -87,18 +88,15 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=1
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -115,6 +113,10 @@
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -122,6 +124,7 @@
 #
 CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -185,7 +188,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -277,10 +279,6 @@
 #
 # Bus options
 #
-CONFIG_CF_ENABLER=y
-# CONFIG_CF_AREA5 is not set
-CONFIG_CF_AREA6=y
-CONFIG_CF_BASE_ADDR=0xb8000000
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
@@ -291,11 +289,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -376,6 +381,7 @@
 CONFIG_NET_SCH_GRED=y
 CONFIG_NET_SCH_DSMARK=y
 CONFIG_NET_SCH_NETEM=y
+# CONFIG_NET_SCH_DRR is not set
 
 #
 # Classification
@@ -394,6 +400,7 @@
 # CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_IND=y
 CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -410,8 +417,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -518,6 +525,7 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -560,6 +568,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
@@ -591,6 +600,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
 CONFIG_NET_ETHERNET=y
@@ -600,6 +612,7 @@
 CONFIG_SH_ETH=y
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -658,6 +671,7 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
@@ -672,11 +686,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -686,7 +700,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -730,7 +744,7 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
@@ -748,6 +762,7 @@
 CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_TIMER is not set
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
@@ -809,10 +824,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -902,6 +914,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -910,16 +923,24 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_DEBUG_BOOTMEM is not set
@@ -927,7 +948,9 @@
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_DUMP_CODE is not set
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -943,11 +966,16 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1030,6 +1058,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/se7721_defconfig b/arch/sh/configs/se7721_defconfig
index b52be140..ad1bace 100644
--- a/arch/sh/configs/se7721_defconfig
+++ b/arch/sh/configs/se7721_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:12:06 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:43:33 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -15,6 +15,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -59,6 +61,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -75,12 +78,10 @@
 # CONFIG_SHMEM is not set
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -91,18 +92,15 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=1
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -119,6 +117,10 @@
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -126,6 +128,7 @@
 #
 CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -189,7 +192,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -280,10 +282,6 @@
 #
 # Bus options
 #
-CONFIG_CF_ENABLER=y
-# CONFIG_CF_AREA5 is not set
-CONFIG_CF_AREA6=y
-CONFIG_CF_BASE_ADDR=0xb8000000
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
@@ -294,11 +292,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -379,6 +384,7 @@
 CONFIG_NET_SCH_GRED=y
 CONFIG_NET_SCH_DSMARK=y
 CONFIG_NET_SCH_NETEM=y
+# CONFIG_NET_SCH_DRR is not set
 
 #
 # Classification
@@ -397,6 +403,7 @@
 # CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_IND=y
 CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -413,8 +420,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -522,6 +529,7 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -673,6 +681,7 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
@@ -686,11 +695,11 @@
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -700,7 +709,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -750,11 +759,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -762,12 +769,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -788,19 +798,21 @@
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -811,11 +823,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -883,6 +895,7 @@
 CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_TIMER is not set
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
@@ -947,10 +960,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1063,6 +1073,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1071,16 +1082,24 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_DEBUG_BOOTMEM is not set
@@ -1088,7 +1107,9 @@
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_DUMP_CODE is not set
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1104,11 +1125,16 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1191,6 +1217,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/se7722_defconfig b/arch/sh/configs/se7722_defconfig
index e6df51f..abb189a 100644
--- a/arch/sh/configs/se7722_defconfig
+++ b/arch/sh/configs/se7722_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:15:10 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:46:59 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -75,13 +77,11 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -93,7 +93,6 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -101,11 +100,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -122,6 +119,10 @@
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -132,6 +133,7 @@
 CONFIG_CPU_SH4AL_DSP=y
 CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -207,7 +209,6 @@
 # CONFIG_MEMORY_HOTPLUG is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -287,7 +288,6 @@
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 
 #
@@ -300,10 +300,6 @@
 #
 # Bus options
 #
-CONFIG_CF_ENABLER=y
-# CONFIG_CF_AREA5 is not set
-CONFIG_CF_AREA6=y
-CONFIG_CF_BASE_ADDR=0xb8000000
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
@@ -314,11 +310,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -371,6 +374,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -386,8 +390,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -420,6 +424,7 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -462,6 +467,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
@@ -485,6 +491,7 @@
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -577,6 +584,7 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -604,11 +612,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -618,7 +626,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -672,7 +680,7 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
@@ -774,10 +782,7 @@
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -831,14 +836,20 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -854,6 +865,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -936,6 +948,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/se7750_defconfig b/arch/sh/configs/se7750_defconfig
index a577099..ac874f6 100644
--- a/arch/sh/configs/se7750_defconfig
+++ b/arch/sh/configs/se7750_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:17:29 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:49:22 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -72,12 +74,10 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -88,18 +88,15 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -116,6 +113,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -123,6 +124,7 @@
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -186,7 +188,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -278,10 +279,6 @@
 #
 # Bus options
 #
-CONFIG_CF_ENABLER=y
-# CONFIG_CF_AREA5 is not set
-CONFIG_CF_AREA6=y
-CONFIG_CF_BASE_ADDR=0xb8000000
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
@@ -291,11 +288,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -352,6 +356,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -367,8 +372,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -469,6 +474,7 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -481,7 +487,6 @@
 # CONFIG_IDE_GD_ATAPI is not set
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -530,6 +535,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
@@ -548,6 +554,7 @@
 CONFIG_STNIC=y
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -610,6 +617,7 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -645,11 +653,11 @@
 # CONFIG_SOFT_WATCHDOG is not set
 CONFIG_SH_WDT=y
 # CONFIG_SH_WDT_MMAP is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -659,7 +667,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -703,7 +711,7 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
@@ -761,10 +769,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -847,13 +852,19 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -869,6 +880,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -951,6 +963,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/se7751_defconfig b/arch/sh/configs/se7751_defconfig
index d99a6bd..f54ae05 100644
--- a/arch/sh/configs/se7751_defconfig
+++ b/arch/sh/configs/se7751_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:21:12 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:51:47 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -72,12 +74,10 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -88,18 +88,15 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -116,6 +113,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -123,6 +124,7 @@
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -186,7 +188,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -280,7 +281,6 @@
 #
 # Bus options
 #
-# CONFIG_CF_ENABLER is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
@@ -290,11 +290,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -370,6 +377,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -385,8 +393,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -490,6 +498,7 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -516,6 +525,7 @@
 # CONFIG_STNIC is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -570,6 +580,7 @@
 #
 # CONFIG_SERIAL_SH_SCI is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -604,11 +615,11 @@
 #
 # CONFIG_SOFT_WATCHDOG is not set
 # CONFIG_SH_WDT is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -618,7 +629,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -662,7 +673,7 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
@@ -722,10 +733,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -787,13 +795,19 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -809,6 +823,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -891,6 +906,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/se7780_defconfig b/arch/sh/configs/se7780_defconfig
index ad95b80..7504978 100644
--- a/arch/sh/configs/se7780_defconfig
+++ b/arch/sh/configs/se7780_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:27:30 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:53:50 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -74,7 +76,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -84,18 +85,15 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -111,6 +109,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -119,6 +121,7 @@
 CONFIG_CPU_SH4=y
 CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -185,7 +188,6 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -274,11 +276,11 @@
 #
 # Bus options
 #
-# CONFIG_CF_ENABLER is not set
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 
@@ -294,6 +296,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -349,6 +352,7 @@
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -363,8 +367,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 
 #
@@ -533,6 +537,8 @@
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -569,11 +575,13 @@
 # CONFIG_SATA_VIA is not set
 # CONFIG_SATA_VITESSE is not set
 # CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD64X is not set
 # CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
 # CONFIG_PATA_EFAR is not set
 # CONFIG_ATA_GENERIC is not set
 # CONFIG_PATA_HPT366 is not set
@@ -585,10 +593,15 @@
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
 # CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
@@ -627,6 +640,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -639,6 +655,7 @@
 # CONFIG_NET_VENDOR_3COM is not set
 CONFIG_SMC91X=y
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -654,7 +671,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -663,6 +679,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -754,6 +771,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
@@ -779,11 +797,11 @@
 CONFIG_THERMAL=y
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -793,7 +811,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -821,15 +839,16 @@
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
 # CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
 # CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -865,6 +884,7 @@
 CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -912,11 +932,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -924,12 +942,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -949,6 +970,7 @@
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -974,11 +996,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1094,10 +1116,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
@@ -1188,13 +1207,19 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1210,6 +1235,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
@@ -1288,6 +1314,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/sh03_defconfig b/arch/sh/configs/sh03_defconfig
index 95f0f5d..04bde1e 100644
--- a/arch/sh/configs/sh03_defconfig
+++ b/arch/sh/configs/sh03_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:31:54 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:56:46 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -79,6 +81,7 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
@@ -91,7 +94,6 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -99,11 +101,9 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -120,6 +120,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -127,6 +131,7 @@
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -190,7 +195,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -268,7 +272,6 @@
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
 
@@ -284,14 +287,11 @@
 #
 # Bus options
 #
-CONFIG_CF_ENABLER=y
-CONFIG_CF_AREA5=y
-# CONFIG_CF_AREA6 is not set
-CONFIG_CF_BASE_ADDR=0xb4000000
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
@@ -307,11 +307,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -369,6 +376,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -384,8 +392,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -427,6 +435,7 @@
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -441,7 +450,6 @@
 CONFIG_BLK_DEV_IDECD=m
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 CONFIG_BLK_DEV_IDETAPE=m
-# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -466,6 +474,7 @@
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -519,6 +528,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -532,6 +542,8 @@
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -583,6 +595,7 @@
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -598,7 +611,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -608,6 +620,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -636,6 +649,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -644,6 +658,7 @@
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
@@ -734,6 +749,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -782,11 +798,11 @@
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -796,7 +812,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -856,9 +872,10 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -883,6 +900,7 @@
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
@@ -930,10 +948,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1048,21 +1063,31 @@
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1078,11 +1103,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1166,6 +1195,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/sh7710voipgw_defconfig b/arch/sh/configs/sh7710voipgw_defconfig
index 9a768b2..1b869f4 100644
--- a/arch/sh/configs/sh7710voipgw_defconfig
+++ b/arch/sh/configs/sh7710voipgw_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:35:18 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 18:00:31 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -74,12 +76,10 @@
 # CONFIG_SHMEM is not set
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -89,7 +89,6 @@
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -97,11 +96,9 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -118,6 +115,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -125,6 +126,7 @@
 #
 CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -188,7 +190,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -287,11 +288,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -378,6 +386,7 @@
 # CONFIG_NET_SCH_GRED is not set
 # CONFIG_NET_SCH_DSMARK is not set
 # CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
 
 #
 # Classification
@@ -398,6 +407,7 @@
 # CONFIG_NET_CLS_ACT is not set
 # CONFIG_NET_CLS_IND is not set
 CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -413,8 +423,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -519,6 +529,7 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -546,6 +557,7 @@
 # CONFIG_SH_ETH is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -638,11 +650,11 @@
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -652,7 +664,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -706,7 +718,7 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
@@ -763,10 +775,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -828,13 +837,19 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -850,6 +865,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -932,6 +948,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig
index 6a77f69..ba33aca 100644
--- a/arch/sh/configs/sh7763rdp_defconfig
+++ b/arch/sh/configs/sh7763rdp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:37:12 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 18:02:28 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -79,11 +81,11 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -96,18 +98,15 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -124,6 +123,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -132,6 +135,7 @@
 CONFIG_CPU_SH4=y
 CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -199,7 +203,6 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -297,11 +300,19 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -357,6 +368,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -373,8 +385,8 @@
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -529,6 +541,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
@@ -555,6 +568,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
 CONFIG_NET_ETHERNET=y
@@ -564,6 +580,7 @@
 CONFIG_SH_ETH=y
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -655,6 +672,7 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -670,11 +688,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -684,7 +702,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -737,6 +755,7 @@
 CONFIG_FB_SH7760=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -781,19 +800,21 @@
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -804,11 +825,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -897,6 +918,7 @@
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
@@ -942,10 +964,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1038,20 +1057,30 @@
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1067,6 +1096,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1149,6 +1179,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig
index 07e33c2..1d63628 100644
--- a/arch/sh/configs/sh7785lcr_defconfig
+++ b/arch/sh/configs/sh7785lcr_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:49:23 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 18:05:18 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
@@ -86,7 +88,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -98,7 +99,6 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -106,11 +106,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -127,6 +125,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -136,6 +138,7 @@
 CONFIG_CPU_SH4A=y
 CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -206,7 +209,6 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -285,7 +287,6 @@
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 
 #
@@ -302,6 +303,7 @@
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
@@ -315,11 +317,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -380,6 +389,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -396,8 +406,8 @@
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -757,6 +767,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -823,8 +834,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -842,11 +853,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -855,9 +866,12 @@
 # CONFIG_MFD_CORE is not set
 CONFIG_MFD_SM501=y
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -889,11 +903,12 @@
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
 # CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -932,6 +947,7 @@
 CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -976,11 +992,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -988,12 +1002,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -1014,6 +1031,8 @@
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -1031,6 +1050,8 @@
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 CONFIG_USB_R8A66597_HCD=y
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -1041,11 +1062,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1100,6 +1121,7 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1135,6 +1157,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1220,10 +1243,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1353,6 +1373,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1361,17 +1382,25 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_DEBUG_BOOTMEM is not set
@@ -1379,7 +1408,9 @@
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_DUMP_CODE is not set
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1395,11 +1426,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1482,6 +1517,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/shmin_defconfig b/arch/sh/configs/shmin_defconfig
index e2b38a3..8ba10e1 100644
--- a/arch/sh/configs/shmin_defconfig
+++ b/arch/sh/configs/shmin_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:52:59 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 18:09:00 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -15,6 +15,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -65,12 +67,10 @@
 # CONFIG_SHMEM is not set
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -78,12 +78,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -100,6 +98,10 @@
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -107,6 +109,7 @@
 #
 CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -170,7 +173,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -268,11 +270,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_PACKET is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
@@ -327,6 +336,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -342,8 +352,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -448,6 +458,7 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -474,6 +485,7 @@
 # CONFIG_STNIC is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -532,6 +544,7 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -547,11 +560,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -561,7 +574,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -605,7 +618,7 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
@@ -660,10 +673,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -723,14 +733,20 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 CONFIG_EARLY_PRINTK=y
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -745,6 +761,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -826,6 +843,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/shx3_defconfig b/arch/sh/configs/shx3_defconfig
index ae5cbe2..ed90a7e 100644
--- a/arch/sh/configs/shx3_defconfig
+++ b/arch/sh/configs/shx3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Tue Oct 21 12:16:25 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 18:10:57 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -18,6 +18,8 @@
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
 CONFIG_GENERIC_LOCKBREAK=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_SMP=y
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_STACKTRACE_SUPPORT=y
@@ -79,6 +81,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -95,11 +98,11 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -113,7 +116,6 @@
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -121,12 +123,10 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -143,6 +143,11 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_CLASSIC_RCU is not set
+# CONFIG_TREE_RCU is not set
+CONFIG_PREEMPT_RCU=y
+CONFIG_RCU_TRACE=y
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_PREEMPT_RCU_TRACE=y
 CONFIG_FREEZER=y
 
 #
@@ -152,6 +157,7 @@
 CONFIG_CPU_SH4A=y
 CONFIG_CPU_SHX3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -230,7 +236,6 @@
 CONFIG_MEMORY_HOTREMOVE=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -323,8 +328,6 @@
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_RCU=y
-CONFIG_RCU_TRACE=y
 
 #
 # Boot options
@@ -347,11 +350,19 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_PACKET is not set
 # CONFIG_UNIX is not set
 CONFIG_XFRM=y
@@ -424,6 +435,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -479,7 +491,9 @@
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -522,6 +536,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
@@ -546,6 +561,7 @@
 CONFIG_SMC91X=y
 # CONFIG_ENC28J60 is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -613,6 +629,7 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -653,8 +670,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -678,7 +695,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
@@ -699,11 +716,11 @@
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -715,6 +732,7 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -763,15 +781,17 @@
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 CONFIG_USB_R8A66597_HCD=m
+# CONFIG_USB_HWA_HCD is not set
 # CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
@@ -783,11 +803,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 # CONFIG_USB_STORAGE is not set
 # CONFIG_USB_LIBUSUAL is not set
@@ -890,12 +910,14 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
 # CONFIG_RTC_DRV_M41T94 is not set
 # CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -981,10 +1003,7 @@
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1049,6 +1068,7 @@
 # CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
@@ -1057,6 +1077,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
@@ -1066,16 +1087,28 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 CONFIG_EARLY_PRINTK=y
@@ -1083,7 +1116,9 @@
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
+CONFIG_DUMP_CODE=y
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1099,6 +1134,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1181,6 +1217,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/snapgear_defconfig b/arch/sh/configs/snapgear_defconfig
index b4ca511..98377e5 100644
--- a/arch/sh/configs/snapgear_defconfig
+++ b/arch/sh/configs/snapgear_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:55:03 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 18:14:08 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -76,7 +78,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -86,13 +87,11 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -109,6 +108,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -116,6 +119,7 @@
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -179,7 +183,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -282,6 +285,7 @@
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 
@@ -292,11 +296,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_PACKET is not set
 # CONFIG_UNIX is not set
 # CONFIG_NET_KEY is not set
@@ -342,6 +353,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -357,8 +369,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -515,6 +527,7 @@
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -530,7 +543,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -544,6 +556,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -624,6 +637,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -641,11 +655,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -655,7 +669,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -689,6 +703,7 @@
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -746,10 +761,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -801,13 +813,19 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -822,6 +840,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/systemh_defconfig b/arch/sh/configs/systemh_defconfig
index 1711f0f..72703bf 100644
--- a/arch/sh/configs/systemh_defconfig
+++ b/arch/sh/configs/systemh_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:56:48 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 18:15:56 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -68,12 +70,10 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -84,7 +84,6 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -92,11 +91,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -113,6 +110,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -120,6 +121,7 @@
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -183,7 +185,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -264,7 +265,6 @@
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
 
@@ -288,6 +288,12 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 # CONFIG_NET is not set
 
 #
@@ -314,6 +320,7 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -360,6 +367,7 @@
 #
 # CONFIG_SERIAL_SH_SCI is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -387,11 +395,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -401,7 +409,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -444,7 +452,7 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
@@ -501,10 +509,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -546,13 +551,19 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -567,6 +578,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig
index ea3c5e8..01fc1de 100644
--- a/arch/sh/configs/titan_defconfig
+++ b/arch/sh/configs/titan_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:58:12 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 18:17:19 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -79,7 +81,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -90,7 +91,6 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -98,11 +98,9 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -119,6 +117,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -126,6 +128,7 @@
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -189,7 +192,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -293,6 +295,7 @@
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
@@ -309,11 +312,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -507,6 +517,7 @@
 CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
+# CONFIG_NET_SCH_DRR is not set
 CONFIG_NET_SCH_INGRESS=m
 
 #
@@ -543,6 +554,7 @@
 # CONFIG_NET_ACT_SKBEDIT is not set
 CONFIG_NET_CLS_IND=y
 CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -560,12 +572,8 @@
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_CRYPT_TKIP=y
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -695,6 +703,7 @@
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -738,6 +747,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -751,6 +761,8 @@
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -807,6 +819,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
@@ -818,6 +833,7 @@
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -833,7 +849,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -847,6 +862,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -875,6 +891,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -883,6 +900,7 @@
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
@@ -1002,6 +1020,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -1055,11 +1074,11 @@
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -1069,7 +1088,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -1145,6 +1164,8 @@
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -1162,6 +1183,8 @@
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -1172,11 +1195,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1273,6 +1296,7 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1379,10 +1403,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1530,6 +1551,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1537,16 +1559,24 @@
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_DEBUG_BOOTMEM is not set
@@ -1554,7 +1584,9 @@
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_DUMP_CODE is not set
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1570,11 +1602,16 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1659,6 +1696,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/ul2_defconfig b/arch/sh/configs/ul2_defconfig
index 9afff67..27f968a 100644
--- a/arch/sh/configs/ul2_defconfig
+++ b/arch/sh/configs/ul2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 17:35:17 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 18:22:53 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -80,7 +82,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -92,7 +93,6 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -100,11 +100,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -121,6 +119,10 @@
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -131,6 +133,7 @@
 CONFIG_CPU_SH4AL_DSP=y
 CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -206,7 +209,6 @@
 # CONFIG_MEMORY_HOTPLUG is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_MIGRATION is not set
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -283,7 +285,6 @@
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 
 #
@@ -307,11 +308,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -367,6 +375,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -380,10 +389,12 @@
 # CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
 CONFIG_NL80211=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
 CONFIG_MAC80211=y
 
 #
@@ -397,11 +408,6 @@
 # CONFIG_MAC80211_MESH is not set
 # CONFIG_MAC80211_LEDS is not set
 # CONFIG_MAC80211_DEBUG_MENU is not set
-CONFIG_IEEE80211=m
-CONFIG_IEEE80211_DEBUG=y
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -510,6 +516,7 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -552,6 +559,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
@@ -575,6 +583,7 @@
 # CONFIG_STNIC is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -714,11 +723,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -728,6 +737,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -785,7 +795,6 @@
 #
 # CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 CONFIG_USB_R8A66597_HCD=y
 # CONFIG_SUPERH_ON_CHIP_R8A66597 is not set
@@ -800,11 +809,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -937,10 +946,7 @@
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1046,13 +1052,19 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1068,11 +1080,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1155,6 +1171,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/include/asm/Kbuild b/arch/sh/include/asm/Kbuild
index f1a2a0d..43910cd 100644
--- a/arch/sh/include/asm/Kbuild
+++ b/arch/sh/include/asm/Kbuild
@@ -6,4 +6,3 @@
 unifdef-y += unistd_64.h
 unifdef-y += posix_types_32.h
 unifdef-y += posix_types_64.h
-unifdef-y += swab.h
diff --git a/arch/sh/include/asm/byteorder.h b/arch/sh/include/asm/byteorder.h
index e95c41a..db2f5d7 100644
--- a/arch/sh/include/asm/byteorder.h
+++ b/arch/sh/include/asm/byteorder.h
@@ -1,8 +1,6 @@
 #ifndef __ASM_SH_BYTEORDER_H
 #define __ASM_SH_BYTEORDER_H
 
-#include <asm/swab.h>
-
 #ifdef __LITTLE_ENDIAN__
 #include <linux/byteorder/little_endian.h>
 #else
diff --git a/arch/sh/include/asm/posix_types_32.h b/arch/sh/include/asm/posix_types_32.h
index 0a3d2f5..2172732 100644
--- a/arch/sh/include/asm/posix_types_32.h
+++ b/arch/sh/include/asm/posix_types_32.h
@@ -39,14 +39,10 @@
 #endif
 
 typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
 	int	val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
-	int	__val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
 } __kernel_fsid_t;
 
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+#if defined(__KERNEL__)
 
 #undef	__FD_SET
 static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
@@ -117,6 +113,6 @@
 	}
 }
 
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+#endif /* defined(__KERNEL__) */
 
 #endif /* __ASM_SH_POSIX_TYPES_H */
diff --git a/arch/sh/include/asm/posix_types_64.h b/arch/sh/include/asm/posix_types_64.h
index 0620317..f83e9bd 100644
--- a/arch/sh/include/asm/posix_types_64.h
+++ b/arch/sh/include/asm/posix_types_64.h
@@ -48,14 +48,10 @@
 #endif
 
 typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
 	int	val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
-	int	__val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
 } __kernel_fsid_t;
 
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+#if defined(__KERNEL__)
 
 #undef	__FD_SET
 static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
@@ -126,6 +122,6 @@
 	}
 }
 
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+#endif /* defined(__KERNEL__) */
 
 #endif /* __ASM_SH64_POSIX_TYPES_H */
diff --git a/arch/sh/include/asm/syscalls_32.h b/arch/sh/include/asm/syscalls_32.h
index 104c5e6..8b30200 100644
--- a/arch/sh/include/asm/syscalls_32.h
+++ b/arch/sh/include/asm/syscalls_32.h
@@ -36,9 +36,9 @@
 asmlinkage int sys_rt_sigreturn(unsigned long r4, unsigned long r5,
 				unsigned long r6, unsigned long r7,
 				struct pt_regs __regs);
-asmlinkage int sys_pipe(unsigned long r4, unsigned long r5,
-			unsigned long r6, unsigned long r7,
-			struct pt_regs __regs);
+asmlinkage int sys_sh_pipe(unsigned long r4, unsigned long r5,
+			   unsigned long r6, unsigned long r7,
+			   struct pt_regs __regs);
 asmlinkage ssize_t sys_pread_wrapper(unsigned int fd, char __user *buf,
 				     size_t count, long dummy, loff_t pos);
 asmlinkage ssize_t sys_pwrite_wrapper(unsigned int fd, const char __user *buf,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
index 0623e37..4ff4dc6 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
@@ -112,6 +112,34 @@
 	.num_resources	= ARRAY_SIZE(veu_resources),
 };
 
+static struct uio_info jpu_platform_data = {
+	.name = "JPU",
+	.version = "0",
+	.irq = 27,
+};
+
+static struct resource jpu_resources[] = {
+	[0] = {
+		.name	= "JPU",
+		.start	= 0xfea00000,
+		.end	= 0xfea102d3,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device jpu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &jpu_platform_data,
+	},
+	.resource	= jpu_resources,
+	.num_resources	= ARRAY_SIZE(jpu_resources),
+};
+
 static struct plat_sci_port sci_platform_data[] = {
 	{
 		.mapbase	= 0xffe00000,
@@ -152,6 +180,7 @@
 	&sci_device,
 	&vpu_device,
 	&veu_device,
+	&jpu_device,
 };
 
 static int __init sh7343_devices_setup(void)
@@ -160,9 +189,11 @@
 	clk_always_enable("xymem0"); /* XYMEM */
 	clk_always_enable("veu0"); /* VEU */
 	clk_always_enable("vpu0"); /* VPU */
+	clk_always_enable("jpu0"); /* JPU */
 
 	platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20);
 	platform_resource_setup_memory(&veu_device, "veu", 2 << 20);
+	platform_resource_setup_memory(&jpu_device, "jpu", 2 << 20);
 
 	return platform_add_devices(sh7343_devices,
 				    ARRAY_SIZE(sh7343_devices));
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index 50cf683..5146afc 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -158,7 +158,7 @@
 	[0] = {
 		.name	= "JPU",
 		.start	= 0xfea00000,
-		.end	= 0xfea102d0,
+		.end	= 0xfea102d3,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c
index a7e5f2e..c90c7e5 100644
--- a/arch/sh/kernel/process_64.c
+++ b/arch/sh/kernel/process_64.c
@@ -520,7 +520,6 @@
 	int error;
 	char *filename;
 
-	lock_kernel();
 	filename = getname((char __user *)ufilename);
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
@@ -537,7 +536,6 @@
 	}
 	putname(filename);
 out:
-	unlock_kernel();
 	return error;
 }
 
diff --git a/arch/sh/kernel/sys_sh32.c b/arch/sh/kernel/sys_sh32.c
index dbba1e1..63ba128 100644
--- a/arch/sh/kernel/sys_sh32.c
+++ b/arch/sh/kernel/sys_sh32.c
@@ -22,7 +22,7 @@
  * sys_pipe() is the normal C calling standard for creating
  * a pipe. It's not the way Unix traditionally does this, though.
  */
-asmlinkage int sys_pipe(unsigned long r4, unsigned long r5,
+asmlinkage int sys_sh_pipe(unsigned long r4, unsigned long r5,
 	unsigned long r6, unsigned long r7,
 	struct pt_regs __regs)
 {
diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S
index 0af693e..e67c173 100644
--- a/arch/sh/kernel/syscalls_32.S
+++ b/arch/sh/kernel/syscalls_32.S
@@ -58,7 +58,7 @@
 	.long sys_mkdir
 	.long sys_rmdir		/* 40 */
 	.long sys_dup
-	.long sys_pipe
+	.long sys_sh_pipe
 	.long sys_times
 	.long sys_ni_syscall	/* old prof syscall holder */
 	.long sys_brk		/* 45 */
@@ -105,7 +105,7 @@
 	.long sys_uselib
 	.long sys_swapon
 	.long sys_reboot
-	.long old_readdir
+	.long sys_old_readdir
 	.long old_mmap		/* 90 */
 	.long sys_munmap
 	.long sys_truncate
diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S
index 0b436aa..557cb91 100644
--- a/arch/sh/kernel/syscalls_64.S
+++ b/arch/sh/kernel/syscalls_64.S
@@ -109,7 +109,7 @@
 	.long sys_uselib
 	.long sys_swapon
 	.long sys_reboot
-	.long old_readdir
+	.long sys_old_readdir
 	.long old_mmap			/* 90 */
 	.long sys_munmap
 	.long sys_truncate
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index c0aa3d8..60dcf87 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -125,20 +125,18 @@
  * - userspace errors just cause EFAULT to be returned, resulting in SEGV
  * - kernel/userspace interfaces cause a jump to an appropriate handler
  * - other kernel errors are bad
- * - return 0 if fixed-up, -EFAULT if non-fatal (to the kernel) fault
  */
-static int die_if_no_fixup(const char * str, struct pt_regs * regs, long err)
+static void die_if_no_fixup(const char * str, struct pt_regs * regs, long err)
 {
 	if (!user_mode(regs)) {
 		const struct exception_table_entry *fixup;
 		fixup = search_exception_tables(regs->pc);
 		if (fixup) {
 			regs->pc = fixup->fixup;
-			return 0;
+			return;
 		}
 		die(str, regs, err);
 	}
-	return -EFAULT;
 }
 
 static inline void sign_extend(unsigned int count, unsigned char *dst)
@@ -314,7 +312,8 @@
 	/* Argh. Address not only misaligned but also non-existent.
 	 * Raise an EFAULT and see if it's trapped
 	 */
-	return die_if_no_fixup("Fault in unaligned fixup", regs, 0);
+	die_if_no_fixup("Fault in unaligned fixup", regs, 0);
+	return -EFAULT;
 }
 
 /*
diff --git a/arch/sh/mm/ioremap_64.c b/arch/sh/mm/ioremap_64.c
index 6e0be24..31e1bb5 100644
--- a/arch/sh/mm/ioremap_64.c
+++ b/arch/sh/mm/ioremap_64.c
@@ -71,9 +71,9 @@
 	 * Ok, go for it..
 	 */
 	area = get_vm_area(size, VM_IOREMAP);
-	pr_debug("Get vm_area returns %p addr %p\n",area,area->addr);
 	if (!area)
 		return NULL;
+	pr_debug("Get vm_area returns %p addr %p\n", area, area->addr);
 	area->phys_addr = phys_addr;
 	addr = area->addr;
 	if (ioremap_page_range((unsigned long)addr, (unsigned long)addr + size,
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index de58c02..c3ea215 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -36,6 +36,7 @@
 	select HAVE_KRETPROBES
 	select HAVE_KPROBES
 	select HAVE_LMB
+	select HAVE_SYSCALL_WRAPPERS
 	select USE_GENERIC_SMP_HELPERS if SMP
 	select RTC_DRV_CMOS
 	select RTC_DRV_BQ4802
diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig
index cde19ae..ade4994 100644
--- a/arch/sparc/configs/sparc64_defconfig
+++ b/arch/sparc/configs/sparc64_defconfig
@@ -867,8 +867,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/sparc/include/asm/Kbuild b/arch/sparc/include/asm/Kbuild
index 95e38a4..deeb0fb 100644
--- a/arch/sparc/include/asm/Kbuild
+++ b/arch/sparc/include/asm/Kbuild
@@ -17,4 +17,3 @@
 header-y += uctx.h
 header-y += utrap.h
 header-y += watchdog.h
-header-y += swab.h
diff --git a/arch/sparc/include/asm/byteorder.h b/arch/sparc/include/asm/byteorder.h
index 48a047c..ccc1b6b 100644
--- a/arch/sparc/include/asm/byteorder.h
+++ b/arch/sparc/include/asm/byteorder.h
@@ -1,7 +1,6 @@
 #ifndef _SPARC_BYTEORDER_H
 #define _SPARC_BYTEORDER_H
 
-#include <asm/swab.h>
 #include <linux/byteorder/big_endian.h>
 
 #endif /* _SPARC_BYTEORDER_H */
diff --git a/arch/sparc/kernel/central.c b/arch/sparc/kernel/central.c
index 05f1c91..f3b5466 100644
--- a/arch/sparc/kernel/central.c
+++ b/arch/sparc/kernel/central.c
@@ -103,6 +103,7 @@
 	p->leds_resource.name = "leds";
 
 	p->leds_pdev.name = "sunfire-clockboard-leds";
+	p->leds_pdev.id = -1;
 	p->leds_pdev.resource = &p->leds_resource;
 	p->leds_pdev.num_resources = 1;
 	p->leds_pdev.dev.parent = &op->dev;
@@ -197,6 +198,7 @@
 		p->leds_resource.name = "leds";
 
 		p->leds_pdev.name = "sunfire-fhc-leds";
+		p->leds_pdev.id = p->board_num;
 		p->leds_pdev.resource = &p->leds_resource;
 		p->leds_pdev.num_resources = 1;
 		p->leds_pdev.dev.parent = &op->dev;
diff --git a/arch/sparc/kernel/cpu.c b/arch/sparc/kernel/cpu.c
index f0b8255..32d32b4 100644
--- a/arch/sparc/kernel/cpu.c
+++ b/arch/sparc/kernel/cpu.c
@@ -239,14 +239,26 @@
 
 static void set_cpu_and_fpu(int psr_impl, int psr_vers, int fpu_vers)
 {
+	const struct manufacturer_info *manuf;
+	int i;
+
 	sparc_cpu_type = NULL;
 	sparc_fpu_type = NULL;
-	if (psr_impl < ARRAY_SIZE(manufacturer_info))
+	manuf = NULL;
+
+	for (i = 0; i < ARRAY_SIZE(manufacturer_info); i++)
+	{
+		if (psr_impl == manufacturer_info[i].psr_impl) {
+			manuf = &manufacturer_info[i];
+			break;
+		}
+	}
+	if (manuf != NULL)
 	{
 		const struct cpu_info *cpu;
 		const struct fpu_info *fpu;
 
-		cpu = &manufacturer_info[psr_impl].cpu_info[0];
+		cpu = &manuf->cpu_info[0];
 		while (cpu->psr_vers != -1)
 		{
 			if (cpu->psr_vers == psr_vers) {
@@ -256,7 +268,7 @@
 			}
 			cpu++;
 		}
-		fpu =  &manufacturer_info[psr_impl].fpu_info[0];
+		fpu =  &manuf->fpu_info[0];
 		while (fpu->fp_vers != -1)
 		{
 			if (fpu->fp_vers == fpu_vers) {
diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S
index faf9ccd..f41ecc5 100644
--- a/arch/sparc/kernel/entry.S
+++ b/arch/sparc/kernel/entry.S
@@ -1088,8 +1088,8 @@
 	 ld	[%sp + STACKFRAME_SZ + PT_I0], %o0
 
 	.align	4
-	.globl	sys_pipe
-sys_pipe:
+	.globl	sys_sparc_pipe
+sys_sparc_pipe:
 	mov	%o7, %l5
 	add	%sp, STACKFRAME_SZ, %o0		! pt_regs *regs arg
 	call	sparc_pipe
diff --git a/arch/sparc/kernel/sparc_ksyms_64.c b/arch/sparc/kernel/sparc_ksyms_64.c
index da8f804f..0f26066 100644
--- a/arch/sparc/kernel/sparc_ksyms_64.c
+++ b/arch/sparc/kernel/sparc_ksyms_64.c
@@ -9,7 +9,6 @@
 #include <linux/pci.h>
 #include <linux/init.h>
 
-#include <asm/spinlock.h>
 #include <asm/system.h>
 #include <asm/cpudata.h>
 #include <asm/uaccess.h>
@@ -23,16 +22,6 @@
 	short revents;
 };
 
-/* used by various drivers */
-#ifdef CONFIG_SMP
-/* Out of line rw-locking implementation. */
-EXPORT_SYMBOL(__read_lock);
-EXPORT_SYMBOL(__read_unlock);
-EXPORT_SYMBOL(__write_lock);
-EXPORT_SYMBOL(__write_unlock);
-EXPORT_SYMBOL(__write_trylock);
-#endif /* CONFIG_SMP */
-
 /* from helpers.S */
 EXPORT_SYMBOL(__flushw_user);
 EXPORT_SYMBOL_GPL(real_hard_smp_processor_id);
diff --git a/arch/sparc/kernel/sys_sparc_64.c b/arch/sparc/kernel/sys_sparc_64.c
index 09058fc..e2d1024 100644
--- a/arch/sparc/kernel/sys_sparc_64.c
+++ b/arch/sparc/kernel/sys_sparc_64.c
@@ -399,7 +399,7 @@
 	}
 }
 
-asmlinkage unsigned long sparc_brk(unsigned long brk)
+SYSCALL_DEFINE1(sparc_brk, unsigned long, brk)
 {
 	/* People could try to be nasty and use ta 0x6d in 32bit programs */
 	if (test_thread_flag(TIF_32BIT) && brk >= STACK_TOP32)
@@ -415,7 +415,7 @@
  * sys_pipe() is the normal C calling standard for creating
  * a pipe. It's not the way unix traditionally does this, though.
  */
-asmlinkage long sparc_pipe(struct pt_regs *regs)
+SYSCALL_DEFINE1(sparc_pipe_real, struct pt_regs *, regs)
 {
 	int fd[2];
 	int error;
@@ -435,8 +435,8 @@
  * This is really horribly ugly.
  */
 
-asmlinkage long sys_ipc(unsigned int call, int first, unsigned long second,
-			unsigned long third, void __user *ptr, long fifth)
+SYSCALL_DEFINE6(ipc, unsigned int, call, int, first, unsigned long, second,
+		unsigned long, third, void __user *, ptr, long, fifth)
 {
 	long err;
 
@@ -519,7 +519,7 @@
 	return err;
 }
 
-asmlinkage long sparc64_newuname(struct new_utsname __user *name)
+SYSCALL_DEFINE1(sparc64_newuname, struct new_utsname __user *, name)
 {
 	int ret = sys_newuname(name);
 	
@@ -530,7 +530,7 @@
 	return ret;
 }
 
-asmlinkage long sparc64_personality(unsigned long personality)
+SYSCALL_DEFINE1(sparc64_personality, unsigned long, personality)
 {
 	int ret;
 
@@ -564,9 +564,9 @@
 }
 
 /* Linux version of mmap */
-asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len,
-	unsigned long prot, unsigned long flags, unsigned long fd,
-	unsigned long off)
+SYSCALL_DEFINE6(mmap, unsigned long, addr, unsigned long, len,
+		unsigned long, prot, unsigned long, flags, unsigned long, fd,
+		unsigned long, off)
 {
 	struct file * file = NULL;
 	unsigned long retval = -EBADF;
@@ -589,7 +589,7 @@
 	return retval;
 }
 
-asmlinkage long sys64_munmap(unsigned long addr, size_t len)
+SYSCALL_DEFINE2(64_munmap, unsigned long, addr, size_t, len)
 {
 	long ret;
 
@@ -606,9 +606,9 @@
 	unsigned long old_len, unsigned long new_len,
 	unsigned long flags, unsigned long new_addr);
                 
-asmlinkage unsigned long sys64_mremap(unsigned long addr,
-	unsigned long old_len, unsigned long new_len,
-	unsigned long flags, unsigned long new_addr)
+SYSCALL_DEFINE5(64_mremap, unsigned long, addr,	unsigned long, old_len,
+		unsigned long, new_len, unsigned long, flags,
+		unsigned long, new_addr)
 {
 	unsigned long ret = -EINVAL;
 
@@ -671,7 +671,7 @@
 
 extern void check_pending(int signum);
 
-asmlinkage long sys_getdomainname(char __user *name, int len)
+SYSCALL_DEFINE2(getdomainname, char __user *, name, int, len)
 {
         int nlen, err;
 
@@ -694,11 +694,10 @@
 	return err;
 }
 
-asmlinkage long sys_utrap_install(utrap_entry_t type,
-				  utrap_handler_t new_p,
-				  utrap_handler_t new_d,
-				  utrap_handler_t __user *old_p,
-				  utrap_handler_t __user *old_d)
+SYSCALL_DEFINE5(utrap_install, utrap_entry_t, type,
+		utrap_handler_t, new_p, utrap_handler_t, new_d,
+		utrap_handler_t __user *, old_p,
+		utrap_handler_t __user *, old_d)
 {
 	if (type < UT_INSTRUCTION_EXCEPTION || type > UT_TRAP_INSTRUCTION_31)
 		return -EINVAL;
@@ -764,11 +763,9 @@
 	return 0;
 }
 
-asmlinkage long sys_rt_sigaction(int sig,
-				 const struct sigaction __user *act,
-				 struct sigaction __user *oact,
-				 void __user *restorer,
-				 size_t sigsetsize)
+SYSCALL_DEFINE5(rt_sigaction, int, sig, const struct sigaction __user *, act,
+		struct sigaction __user *, oact, void __user *, restorer,
+		size_t, sigsetsize)
 {
 	struct k_sigaction new_ka, old_ka;
 	int ret;
@@ -808,7 +805,8 @@
 	reset_pic();
 }
 
-asmlinkage long sys_perfctr(int opcode, unsigned long arg0, unsigned long arg1, unsigned long arg2)
+SYSCALL_DEFINE4(perfctr, int, opcode, unsigned long, arg0,
+		unsigned long, arg1, unsigned long, arg2)
 {
 	int err = 0;
 
diff --git a/arch/sparc/kernel/syscalls.S b/arch/sparc/kernel/syscalls.S
index 7a6786a..d150c2a 100644
--- a/arch/sparc/kernel/syscalls.S
+++ b/arch/sparc/kernel/syscalls.S
@@ -20,8 +20,8 @@
 	 add	%sp, PTREGS_OFF, %o0
 
 	.align	32
-sys_pipe:
-	ba,pt	%xcc, sparc_pipe
+sys_sparc_pipe:
+	ba,pt	%xcc, sys_sparc_pipe_real
 	 add	%sp, PTREGS_OFF, %o0
 sys_nis_syscall:
 	ba,pt	%xcc, c_sys_nis_syscall
diff --git a/arch/sparc/kernel/systbls.h b/arch/sparc/kernel/systbls.h
index bc9f5da..15c2d752 100644
--- a/arch/sparc/kernel/systbls.h
+++ b/arch/sparc/kernel/systbls.h
@@ -16,9 +16,6 @@
 			       void __user *ptr, long fifth);
 extern asmlinkage long sparc64_newuname(struct new_utsname __user *name);
 extern asmlinkage long sparc64_personality(unsigned long personality);
-extern asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len,
-					 unsigned long prot, unsigned long flags,
-					 unsigned long fd, unsigned long off);
 extern asmlinkage long sys64_munmap(unsigned long addr, size_t len);
 extern asmlinkage unsigned long sys64_mremap(unsigned long addr,
 					     unsigned long old_len,
diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S
index 7d08075..dccc95d 100644
--- a/arch/sparc/kernel/systbls_32.S
+++ b/arch/sparc/kernel/systbls_32.S
@@ -24,7 +24,7 @@
 /*25*/	.long sys_vmsplice, sys_ptrace, sys_alarm, sys_sigaltstack, sys_pause
 /*30*/	.long sys_utime, sys_lchown, sys_fchown, sys_access, sys_nice
 /*35*/	.long sys_chown, sys_sync, sys_kill, sys_newstat, sys_sendfile
-/*40*/	.long sys_newlstat, sys_dup, sys_pipe, sys_times, sys_getuid
+/*40*/	.long sys_newlstat, sys_dup, sys_sparc_pipe, sys_times, sys_getuid
 /*45*/	.long sys_umount, sys_setgid16, sys_getgid16, sys_signal, sys_geteuid16
 /*50*/	.long sys_getegid16, sys_acct, sys_nis_syscall, sys_getgid, sys_ioctl
 /*55*/	.long sys_reboot, sys_mmap2, sys_symlink, sys_readlink, sys_execve
@@ -56,7 +56,7 @@
 /*185*/	.long sys_setpgid, sys_fremovexattr, sys_tkill, sys_exit_group, sys_newuname
 /*190*/	.long sys_init_module, sys_personality, sparc_remap_file_pages, sys_epoll_create, sys_epoll_ctl
 /*195*/	.long sys_epoll_wait, sys_ioprio_set, sys_getppid, sparc_sigaction, sys_sgetmask
-/*200*/	.long sys_ssetmask, sys_sigsuspend, sys_newlstat, sys_uselib, old_readdir
+/*200*/	.long sys_ssetmask, sys_sigsuspend, sys_newlstat, sys_uselib, sys_old_readdir
 /*205*/	.long sys_readahead, sys_socketcall, sys_syslog, sys_lookup_dcookie, sys_fadvise64
 /*210*/	.long sys_fadvise64_64, sys_tgkill, sys_waitpid, sys_swapoff, sys_sysinfo
 /*215*/	.long sys_ipc, sys_sigreturn, sys_clone, sys_ioprio_get, sys_adjtimex
diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S
index 9fc78cf..f93c42a 100644
--- a/arch/sparc/kernel/systbls_64.S
+++ b/arch/sparc/kernel/systbls_64.S
@@ -21,12 +21,12 @@
 /*0*/	.word sys_restart_syscall, sys32_exit, sys_fork, sys_read, sys_write
 /*5*/	.word sys32_open, sys_close, sys32_wait4, sys32_creat, sys_link
 /*10*/  .word sys_unlink, sunos_execv, sys_chdir, sys_chown16, sys32_mknod
-/*15*/	.word sys_chmod, sys_lchown16, sparc_brk, sys32_perfctr, sys32_lseek
+/*15*/	.word sys_chmod, sys_lchown16, sys_sparc_brk, sys32_perfctr, sys32_lseek
 /*20*/	.word sys_getpid, sys_capget, sys_capset, sys_setuid16, sys_getuid16
 /*25*/	.word sys32_vmsplice, compat_sys_ptrace, sys_alarm, sys32_sigaltstack, sys_pause
 /*30*/	.word compat_sys_utime, sys_lchown, sys_fchown, sys32_access, sys32_nice
 	.word sys_chown, sys_sync, sys32_kill, compat_sys_newstat, sys32_sendfile
-/*40*/	.word compat_sys_newlstat, sys_dup, sys_pipe, compat_sys_times, sys_getuid
+/*40*/	.word compat_sys_newlstat, sys_dup, sys_sparc_pipe, compat_sys_times, sys_getuid
 	.word sys32_umount, sys_setgid16, sys_getgid16, sys32_signal, sys_geteuid16
 /*50*/	.word sys_getegid16, sys_acct, sys_nis_syscall, sys_getgid, compat_sys_ioctl
 	.word sys32_reboot, sys32_mmap2, sys_symlink, sys32_readlink, sys32_execve
@@ -55,8 +55,8 @@
 /*170*/	.word sys32_lsetxattr, sys32_fsetxattr, sys_getxattr, sys_lgetxattr, compat_sys_getdents
 	.word sys_setsid, sys_fchdir, sys32_fgetxattr, sys_listxattr, sys_llistxattr
 /*180*/	.word sys32_flistxattr, sys_removexattr, sys_lremovexattr, compat_sys_sigpending, sys_ni_syscall
-	.word sys32_setpgid, sys32_fremovexattr, sys32_tkill, sys32_exit_group, sparc64_newuname
-/*190*/	.word sys32_init_module, sparc64_personality, sys_remap_file_pages, sys32_epoll_create, sys32_epoll_ctl
+	.word sys32_setpgid, sys32_fremovexattr, sys32_tkill, sys32_exit_group, sys_sparc64_newuname
+/*190*/	.word sys32_init_module, sys_sparc64_personality, sys_remap_file_pages, sys32_epoll_create, sys32_epoll_ctl
 	.word sys32_epoll_wait, sys32_ioprio_set, sys_getppid, sys32_sigaction, sys_sgetmask
 /*200*/	.word sys32_ssetmask, sys_sigsuspend, compat_sys_newlstat, sys_uselib, compat_sys_old_readdir
 	.word sys32_readahead, sys32_socketcall, sys32_syslog, sys32_lookup_dcookie, sys32_fadvise64
@@ -95,18 +95,18 @@
 /*0*/	.word sys_restart_syscall, sparc_exit, sys_fork, sys_read, sys_write
 /*5*/	.word sys_open, sys_close, sys_wait4, sys_creat, sys_link
 /*10*/  .word sys_unlink, sys_nis_syscall, sys_chdir, sys_chown, sys_mknod
-/*15*/	.word sys_chmod, sys_lchown, sparc_brk, sys_perfctr, sys_lseek
+/*15*/	.word sys_chmod, sys_lchown, sys_sparc_brk, sys_perfctr, sys_lseek
 /*20*/	.word sys_getpid, sys_capget, sys_capset, sys_setuid, sys_getuid
 /*25*/	.word sys_vmsplice, sys_ptrace, sys_alarm, sys_sigaltstack, sys_nis_syscall
 /*30*/	.word sys_utime, sys_nis_syscall, sys_nis_syscall, sys_access, sys_nice
 	.word sys_nis_syscall, sys_sync, sys_kill, sys_newstat, sys_sendfile64
-/*40*/	.word sys_newlstat, sys_dup, sys_pipe, sys_times, sys_nis_syscall
+/*40*/	.word sys_newlstat, sys_dup, sys_sparc_pipe, sys_times, sys_nis_syscall
 	.word sys_umount, sys_setgid, sys_getgid, sys_signal, sys_geteuid
 /*50*/	.word sys_getegid, sys_acct, sys_memory_ordering, sys_nis_syscall, sys_ioctl
 	.word sys_reboot, sys_nis_syscall, sys_symlink, sys_readlink, sys_execve
 /*60*/	.word sys_umask, sys_chroot, sys_newfstat, sys_fstat64, sys_getpagesize
 	.word sys_msync, sys_vfork, sys_pread64, sys_pwrite64, sys_nis_syscall
-/*70*/	.word sys_nis_syscall, sys_mmap, sys_nis_syscall, sys64_munmap, sys_mprotect
+/*70*/	.word sys_nis_syscall, sys_mmap, sys_nis_syscall, sys_64_munmap, sys_mprotect
 	.word sys_madvise, sys_vhangup, sys_nis_syscall, sys_mincore, sys_getgroups
 /*80*/	.word sys_setgroups, sys_getpgrp, sys_nis_syscall, sys_setitimer, sys_nis_syscall
 	.word sys_swapon, sys_getitimer, sys_nis_syscall, sys_sethostname, sys_nis_syscall
@@ -129,8 +129,8 @@
 /*170*/	.word sys_lsetxattr, sys_fsetxattr, sys_getxattr, sys_lgetxattr, sys_getdents
 	.word sys_setsid, sys_fchdir, sys_fgetxattr, sys_listxattr, sys_llistxattr
 /*180*/	.word sys_flistxattr, sys_removexattr, sys_lremovexattr, sys_nis_syscall, sys_ni_syscall
-	.word sys_setpgid, sys_fremovexattr, sys_tkill, sys_exit_group, sparc64_newuname
-/*190*/	.word sys_init_module, sparc64_personality, sys_remap_file_pages, sys_epoll_create, sys_epoll_ctl
+	.word sys_setpgid, sys_fremovexattr, sys_tkill, sys_exit_group, sys_sparc64_newuname
+/*190*/	.word sys_init_module, sys_sparc64_personality, sys_remap_file_pages, sys_epoll_create, sys_epoll_ctl
 	.word sys_epoll_wait, sys_ioprio_set, sys_getppid, sys_nis_syscall, sys_sgetmask
 /*200*/	.word sys_ssetmask, sys_nis_syscall, sys_newlstat, sys_uselib, sys_nis_syscall
 	.word sys_readahead, sys_socketcall, sys_syslog, sys_lookup_dcookie, sys_fadvise64
@@ -142,7 +142,7 @@
 	.word sys_fstatfs64, sys_llseek, sys_mlock, sys_munlock, sys_mlockall
 /*240*/	.word sys_munlockall, sys_sched_setparam, sys_sched_getparam, sys_sched_setscheduler, sys_sched_getscheduler
 	.word sys_sched_yield, sys_sched_get_priority_max, sys_sched_get_priority_min, sys_sched_rr_get_interval, sys_nanosleep
-/*250*/	.word sys64_mremap, sys_sysctl, sys_getsid, sys_fdatasync, sys_nfsservctl
+/*250*/	.word sys_64_mremap, sys_sysctl, sys_getsid, sys_fdatasync, sys_nfsservctl
 	.word sys_sync_file_range, sys_clock_settime, sys_clock_gettime, sys_clock_getres, sys_clock_nanosleep
 /*260*/	.word sys_sched_getaffinity, sys_sched_setaffinity, sys_timer_settime, sys_timer_gettime, sys_timer_getoverrun
 	.word sys_timer_delete, sys_timer_create, sys_ni_syscall, sys_io_setup, sys_io_destroy
diff --git a/arch/sparc/kernel/traps_64.c b/arch/sparc/kernel/traps_64.c
index c2d153d..d809c4e 100644
--- a/arch/sparc/kernel/traps_64.c
+++ b/arch/sparc/kernel/traps_64.c
@@ -1,6 +1,6 @@
 /* arch/sparc64/kernel/traps.c
  *
- * Copyright (C) 1995,1997,2008 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1995,1997,2008,2009 David S. Miller (davem@davemloft.net)
  * Copyright (C) 1997,1999,2000 Jakub Jelinek (jakub@redhat.com)
  */
 
@@ -314,6 +314,21 @@
 		return;
 
 	if (regs->tstate & TSTATE_PRIV) {
+		/* Test if this comes from uaccess places. */
+		const struct exception_table_entry *entry;
+
+		entry = search_exception_tables(regs->tpc);
+		if (entry) {
+			/* Ouch, somebody is trying VM hole tricks on us... */
+#ifdef DEBUG_EXCEPTIONS
+			printk("Exception: PC<%016lx> faddr<UNKNOWN>\n", regs->tpc);
+			printk("EX_TABLE: insn<%016lx> fixup<%016lx>\n",
+			       regs->tpc, entry->fixup);
+#endif
+			regs->tpc = entry->fixup;
+			regs->tnpc = regs->tpc + 4;
+			return;
+		}
 		printk("sun4v_data_access_exception: ADDR[%016lx] "
 		       "CTX[%04x] TYPE[%04x], going.\n",
 		       addr, ctx, type);
diff --git a/arch/sparc/lib/Makefile b/arch/sparc/lib/Makefile
index 273fc85..e75faf0 100644
--- a/arch/sparc/lib/Makefile
+++ b/arch/sparc/lib/Makefile
@@ -18,7 +18,7 @@
 lib-y                 += rwsem_$(BITS).o
 lib-$(CONFIG_SPARC32) += muldi3.o bitext.o cmpdi2.o
 
-lib-$(CONFIG_SPARC64) += PeeCeeI.o copy_page.o clear_page.o bzero.o
+lib-$(CONFIG_SPARC64) += copy_page.o clear_page.o bzero.o
 lib-$(CONFIG_SPARC64) += csum_copy.o csum_copy_from_user.o csum_copy_to_user.o
 lib-$(CONFIG_SPARC64) += VISsave.o
 lib-$(CONFIG_SPARC64) += bitops.o
@@ -43,3 +43,4 @@
 obj-y                 += iomap.o
 obj-$(CONFIG_SPARC32) += atomic32.o
 obj-y                 += ksyms.o
+obj-$(CONFIG_SPARC64) += PeeCeeI.o
diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index b30a08e..edba00d 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -1331,8 +1331,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index 0e7dbc0..322dd27 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -1311,8 +1311,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/x86/include/asm/Kbuild b/arch/x86/include/asm/Kbuild
index a9f8a81..4a8e80c 100644
--- a/arch/x86/include/asm/Kbuild
+++ b/arch/x86/include/asm/Kbuild
@@ -22,4 +22,3 @@
 unifdef-y += unistd_64.h
 unifdef-y += vm86.h
 unifdef-y += vsyscall.h
-unifdef-y += swab.h
diff --git a/arch/x86/include/asm/bitops.h b/arch/x86/include/asm/bitops.h
index e02a359..02b47a6 100644
--- a/arch/x86/include/asm/bitops.h
+++ b/arch/x86/include/asm/bitops.h
@@ -3,6 +3,9 @@
 
 /*
  * Copyright 1992, Linus Torvalds.
+ *
+ * Note: inlines with more than a single statement should be marked
+ * __always_inline to avoid problems with older gcc's inlining heuristics.
  */
 
 #ifndef _LINUX_BITOPS_H
@@ -53,7 +56,8 @@
  * Note that @nr may be almost arbitrarily large; this function is not
  * restricted to acting on a single-word quantity.
  */
-static inline void set_bit(unsigned int nr, volatile unsigned long *addr)
+static __always_inline void
+set_bit(unsigned int nr, volatile unsigned long *addr)
 {
 	if (IS_IMMEDIATE(nr)) {
 		asm volatile(LOCK_PREFIX "orb %1,%0"
@@ -90,7 +94,8 @@
  * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
  * in order to ensure changes are visible on other processors.
  */
-static inline void clear_bit(int nr, volatile unsigned long *addr)
+static __always_inline void
+clear_bit(int nr, volatile unsigned long *addr)
 {
 	if (IS_IMMEDIATE(nr)) {
 		asm volatile(LOCK_PREFIX "andb %1,%0"
@@ -204,7 +209,8 @@
  *
  * This is the same as test_and_set_bit on x86.
  */
-static inline int test_and_set_bit_lock(int nr, volatile unsigned long *addr)
+static __always_inline int
+test_and_set_bit_lock(int nr, volatile unsigned long *addr)
 {
 	return test_and_set_bit(nr, addr);
 }
@@ -300,7 +306,7 @@
 	return oldbit;
 }
 
-static inline int constant_test_bit(unsigned int nr, const volatile unsigned long *addr)
+static __always_inline int constant_test_bit(unsigned int nr, const volatile unsigned long *addr)
 {
 	return ((1UL << (nr % BITS_PER_LONG)) &
 		(((unsigned long *)addr)[nr / BITS_PER_LONG])) != 0;
diff --git a/arch/x86/include/asm/byteorder.h b/arch/x86/include/asm/byteorder.h
index 7c49917..b13a7a8 100644
--- a/arch/x86/include/asm/byteorder.h
+++ b/arch/x86/include/asm/byteorder.h
@@ -1,7 +1,6 @@
 #ifndef _ASM_X86_BYTEORDER_H
 #define _ASM_X86_BYTEORDER_H
 
-#include <asm/swab.h>
 #include <linux/byteorder/little_endian.h>
 
 #endif /* _ASM_X86_BYTEORDER_H */
diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h
index 05cfed4..1dbbdf4 100644
--- a/arch/x86/include/asm/io.h
+++ b/arch/x86/include/asm/io.h
@@ -99,7 +99,6 @@
  * A boot-time mapping is currently limited to at most 16 pages.
  */
 extern void early_ioremap_init(void);
-extern void early_ioremap_clear(void);
 extern void early_ioremap_reset(void);
 extern void __iomem *early_ioremap(unsigned long offset, unsigned long size);
 extern void __iomem *early_memremap(unsigned long offset, unsigned long size);
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index cb58643..358acc5 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -202,6 +202,35 @@
 #define MSR_IA32_THERM_STATUS		0x0000019c
 #define MSR_IA32_MISC_ENABLE		0x000001a0
 
+/* MISC_ENABLE bits: architectural */
+#define MSR_IA32_MISC_ENABLE_FAST_STRING	(1ULL << 0)
+#define MSR_IA32_MISC_ENABLE_TCC		(1ULL << 1)
+#define MSR_IA32_MISC_ENABLE_EMON		(1ULL << 7)
+#define MSR_IA32_MISC_ENABLE_BTS_UNAVAIL	(1ULL << 11)
+#define MSR_IA32_MISC_ENABLE_PEBS_UNAVAIL	(1ULL << 12)
+#define MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP	(1ULL << 16)
+#define MSR_IA32_MISC_ENABLE_MWAIT		(1ULL << 18)
+#define MSR_IA32_MISC_ENABLE_LIMIT_CPUID	(1ULL << 22)
+#define MSR_IA32_MISC_ENABLE_XTPR_DISABLE	(1ULL << 23)
+#define MSR_IA32_MISC_ENABLE_XD_DISABLE		(1ULL << 34)
+
+/* MISC_ENABLE bits: model-specific, meaning may vary from core to core */
+#define MSR_IA32_MISC_ENABLE_X87_COMPAT		(1ULL << 2)
+#define MSR_IA32_MISC_ENABLE_TM1		(1ULL << 3)
+#define MSR_IA32_MISC_ENABLE_SPLIT_LOCK_DISABLE	(1ULL << 4)
+#define MSR_IA32_MISC_ENABLE_L3CACHE_DISABLE	(1ULL << 6)
+#define MSR_IA32_MISC_ENABLE_SUPPRESS_LOCK	(1ULL << 8)
+#define MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE	(1ULL << 9)
+#define MSR_IA32_MISC_ENABLE_FERR		(1ULL << 10)
+#define MSR_IA32_MISC_ENABLE_FERR_MULTIPLEX	(1ULL << 10)
+#define MSR_IA32_MISC_ENABLE_TM2		(1ULL << 13)
+#define MSR_IA32_MISC_ENABLE_ADJ_PREF_DISABLE	(1ULL << 19)
+#define MSR_IA32_MISC_ENABLE_SPEEDSTEP_LOCK	(1ULL << 20)
+#define MSR_IA32_MISC_ENABLE_L1D_CONTEXT	(1ULL << 24)
+#define MSR_IA32_MISC_ENABLE_DCU_PREF_DISABLE	(1ULL << 37)
+#define MSR_IA32_MISC_ENABLE_TURBO_DISABLE	(1ULL << 38)
+#define MSR_IA32_MISC_ENABLE_IP_PREF_DISABLE	(1ULL << 39)
+
 /* Intel Model 6 */
 #define MSR_P6_EVNTSEL0			0x00000186
 #define MSR_P6_EVNTSEL1			0x00000187
diff --git a/arch/x86/include/asm/pgalloc.h b/arch/x86/include/asm/pgalloc.h
index cb7c151..dd14c54 100644
--- a/arch/x86/include/asm/pgalloc.h
+++ b/arch/x86/include/asm/pgalloc.h
@@ -42,6 +42,7 @@
 
 static inline void pte_free(struct mm_struct *mm, struct page *pte)
 {
+	pgtable_page_dtor(pte);
 	__free_page(pte);
 }
 
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 83e69f4..06bbcbd 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -341,6 +341,25 @@
 
 #define canon_pgprot(p) __pgprot(pgprot_val(p) & __supported_pte_mask)
 
+static inline int is_new_memtype_allowed(unsigned long flags,
+						unsigned long new_flags)
+{
+	/*
+	 * Certain new memtypes are not allowed with certain
+	 * requested memtype:
+	 * - request is uncached, return cannot be write-back
+	 * - request is write-combine, return cannot be write-back
+	 */
+	if ((flags == _PAGE_CACHE_UC_MINUS &&
+	     new_flags == _PAGE_CACHE_WB) ||
+	    (flags == _PAGE_CACHE_WC &&
+	     new_flags == _PAGE_CACHE_WB)) {
+		return 0;
+	}
+
+	return 1;
+}
+
 #ifndef __ASSEMBLY__
 /* Indicate that x86 has its own track and untrack pfn vma functions */
 #define __HAVE_PFNMAP_TRACKING
diff --git a/arch/x86/include/asm/syscalls.h b/arch/x86/include/asm/syscalls.h
index 9c6797c..c0b0bda 100644
--- a/arch/x86/include/asm/syscalls.h
+++ b/arch/x86/include/asm/syscalls.h
@@ -40,7 +40,7 @@
 			     struct old_sigaction __user *);
 asmlinkage int sys_sigaltstack(unsigned long);
 asmlinkage unsigned long sys_sigreturn(unsigned long);
-asmlinkage int sys_rt_sigreturn(struct pt_regs);
+asmlinkage int sys_rt_sigreturn(unsigned long);
 
 /* kernel/ioport.c */
 asmlinkage long sys_iopl(unsigned long);
diff --git a/arch/x86/include/asm/timex.h b/arch/x86/include/asm/timex.h
index 1287dc1..b5c9d45 100644
--- a/arch/x86/include/asm/timex.h
+++ b/arch/x86/include/asm/timex.h
@@ -1,18 +1,13 @@
-/* x86 architecture timex specifications */
 #ifndef _ASM_X86_TIMEX_H
 #define _ASM_X86_TIMEX_H
 
 #include <asm/processor.h>
 #include <asm/tsc.h>
 
-#ifdef CONFIG_X86_ELAN
-#  define PIT_TICK_RATE 1189200 /* AMD Elan has different frequency! */
-#elif defined(CONFIG_X86_RDC321X)
-#  define PIT_TICK_RATE 1041667 /* Underlying HZ for R8610 */
-#else
-#  define PIT_TICK_RATE 1193182 /* Underlying HZ */
-#endif
-#define CLOCK_TICK_RATE	PIT_TICK_RATE
+/* The PIT ticks at this frequency (in HZ): */
+#define PIT_TICK_RATE		1193182
+
+#define CLOCK_TICK_RATE		PIT_TICK_RATE
 
 #define ARCH_HAS_READ_CURRENT_TIMER
 
diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index 0f830e4..4b6df24 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -895,6 +895,10 @@
 {
 	unsigned int value;
 
+	/* APIC hasn't been mapped yet */
+	if (!apic_phys)
+		return;
+
 	clear_local_APIC();
 
 	/*
@@ -1833,6 +1837,11 @@
 	num_processors++;
 	cpu = cpumask_next_zero(-1, cpu_present_mask);
 
+	if (version != apic_version[boot_cpu_physical_apicid])
+		WARN_ONCE(1,
+			"ACPI: apic version mismatch, bootcpu: %x cpu %d: %x\n",
+			apic_version[boot_cpu_physical_apicid], cpu, version);
+
 	physid_set(apicid, phys_cpu_present_map);
 	if (apicid == boot_cpu_physical_apicid) {
 		/*
diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index 6f11e02..4b1c319 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -145,13 +145,14 @@
 
 struct drv_cmd {
 	unsigned int type;
-	cpumask_var_t mask;
+	const struct cpumask *mask;
 	drv_addr_union addr;
 	u32 val;
 };
 
-static void do_drv_read(struct drv_cmd *cmd)
+static long do_drv_read(void *_cmd)
 {
+	struct drv_cmd *cmd = _cmd;
 	u32 h;
 
 	switch (cmd->type) {
@@ -166,10 +167,12 @@
 	default:
 		break;
 	}
+	return 0;
 }
 
-static void do_drv_write(struct drv_cmd *cmd)
+static long do_drv_write(void *_cmd)
 {
+	struct drv_cmd *cmd = _cmd;
 	u32 lo, hi;
 
 	switch (cmd->type) {
@@ -186,30 +189,23 @@
 	default:
 		break;
 	}
+	return 0;
 }
 
 static void drv_read(struct drv_cmd *cmd)
 {
-	cpumask_t saved_mask = current->cpus_allowed;
 	cmd->val = 0;
 
-	set_cpus_allowed_ptr(current, cmd->mask);
-	do_drv_read(cmd);
-	set_cpus_allowed_ptr(current, &saved_mask);
+	work_on_cpu(cpumask_any(cmd->mask), do_drv_read, cmd);
 }
 
 static void drv_write(struct drv_cmd *cmd)
 {
-	cpumask_t saved_mask = current->cpus_allowed;
 	unsigned int i;
 
 	for_each_cpu(i, cmd->mask) {
-		set_cpus_allowed_ptr(current, cpumask_of(i));
-		do_drv_write(cmd);
+		work_on_cpu(i, do_drv_write, cmd);
 	}
-
-	set_cpus_allowed_ptr(current, &saved_mask);
-	return;
 }
 
 static u32 get_cur_val(const struct cpumask *mask)
@@ -235,8 +231,7 @@
 		return 0;
 	}
 
-	cpumask_copy(cmd.mask, mask);
-
+	cmd.mask = mask;
 	drv_read(&cmd);
 
 	dprintk("get_cur_val = %u\n", cmd.val);
@@ -368,7 +363,7 @@
 	return freq;
 }
 
-static unsigned int check_freqs(const cpumask_t *mask, unsigned int freq,
+static unsigned int check_freqs(const struct cpumask *mask, unsigned int freq,
 				struct acpi_cpufreq_data *data)
 {
 	unsigned int cur_freq;
@@ -403,9 +398,6 @@
 		return -ENODEV;
 	}
 
-	if (unlikely(!alloc_cpumask_var(&cmd.mask, GFP_KERNEL)))
-		return -ENOMEM;
-
 	perf = data->acpi_data;
 	result = cpufreq_frequency_table_target(policy,
 						data->freq_table,
@@ -450,9 +442,9 @@
 
 	/* cpufreq holds the hotplug lock, so we are safe from here on */
 	if (policy->shared_type != CPUFREQ_SHARED_TYPE_ANY)
-		cpumask_and(cmd.mask, cpu_online_mask, policy->cpus);
+		cmd.mask = policy->cpus;
 	else
-		cpumask_copy(cmd.mask, cpumask_of(policy->cpu));
+		cmd.mask = cpumask_of(policy->cpu);
 
 	freqs.old = perf->states[perf->state].core_frequency * 1000;
 	freqs.new = data->freq_table[next_state].frequency;
@@ -479,7 +471,6 @@
 	perf->state = next_perf_state;
 
 out:
-	free_cpumask_var(cmd.mask);
 	return result;
 }
 
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 8ea6929..549f2ad 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -29,6 +29,19 @@
 
 static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
 {
+	/* Unmask CPUID levels if masked: */
+	if (c->x86 == 6 && c->x86_model >= 15) {
+		u64 misc_enable;
+
+		rdmsrl(MSR_IA32_MISC_ENABLE, misc_enable);
+
+		if (misc_enable & MSR_IA32_MISC_ENABLE_LIMIT_CPUID) {
+			misc_enable &= ~MSR_IA32_MISC_ENABLE_LIMIT_CPUID;
+			wrmsrl(MSR_IA32_MISC_ENABLE, misc_enable);
+			c->cpuid_level = cpuid_eax(0);
+		}
+	}
+
 	if ((c->x86 == 0xf && c->x86_model >= 0x03) ||
 		(c->x86 == 0x6 && c->x86_model >= 0x0e))
 		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index b59ddcc..0c0a455 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -33,11 +33,13 @@
 struct mtrr_state_type mtrr_state = {};
 EXPORT_SYMBOL_GPL(mtrr_state);
 
-#undef MODULE_PARAM_PREFIX
-#define MODULE_PARAM_PREFIX "mtrr."
-
-static int mtrr_show;
-module_param_named(show, mtrr_show, bool, 0);
+static int __initdata mtrr_show;
+static int __init mtrr_debug(char *opt)
+{
+	mtrr_show = 1;
+	return 0;
+}
+early_param("mtrr.show", mtrr_debug);
 
 /*
  * Returns the effective MTRR type for the region
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index d6f0490..4646902 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -1203,7 +1203,6 @@
 	pushl %eax
 	CFI_ADJUST_CFA_OFFSET 4
 	SAVE_ALL
-	TRACE_IRQS_OFF
 	xorl %edx,%edx		# zero error code
 	movl %esp,%eax		# pt_regs pointer
 	call do_nmi
@@ -1244,7 +1243,6 @@
 	pushl %eax
 	CFI_ADJUST_CFA_OFFSET 4
 	SAVE_ALL
-	TRACE_IRQS_OFF
 	FIXUP_ESPFIX_STACK		# %eax == %esp
 	xorl %edx,%edx			# zero error code
 	call do_nmi
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index cd759ad..64d5ad0 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -628,11 +628,12 @@
 
 	switch (action & 0xf) {
 	case CPU_ONLINE:
-		INIT_DELAYED_WORK(&work.work, hpet_work);
+		INIT_DELAYED_WORK_ON_STACK(&work.work, hpet_work);
 		init_completion(&work.complete);
 		/* FIXME: add schedule_work_on() */
 		schedule_delayed_work_on(cpu, &work.work, 0);
 		wait_for_completion(&work.complete);
+		destroy_timer_on_stack(&work.work.timer);
 		break;
 	case CPU_DEAD:
 		if (hdev) {
diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c
index 884d985..e948b28 100644
--- a/arch/x86/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes.c
@@ -446,7 +446,7 @@
 static void __kprobes setup_singlestep(struct kprobe *p, struct pt_regs *regs,
 				       struct kprobe_ctlblk *kcb)
 {
-#if !defined(CONFIG_PREEMPT) || defined(CONFIG_PM)
+#if !defined(CONFIG_PREEMPT) || defined(CONFIG_FREEZER)
 	if (p->ainsn.boostable == 1 && !p->post_handler) {
 		/* Boost up -- we can execute copied instructions directly */
 		reset_current_kprobe();
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 55c4607..0116107 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -136,7 +136,7 @@
 #ifdef CONFIG_X86_64
 
 /* correctly size the local cpu masks */
-static void setup_cpu_local_masks(void)
+static void __init setup_cpu_local_masks(void)
 {
 	alloc_bootmem_cpumask_var(&cpu_initialized_mask);
 	alloc_bootmem_cpumask_var(&cpu_callin_mask);
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index 89bb766..df0587f 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -632,9 +632,16 @@
 }
 
 #ifdef CONFIG_X86_32
-asmlinkage int sys_rt_sigreturn(struct pt_regs regs)
+/*
+ * Note: do not pass in pt_regs directly as with tail-call optimization
+ * GCC will incorrectly stomp on the caller's frame and corrupt user-space
+ * register state:
+ */
+asmlinkage int sys_rt_sigreturn(unsigned long __unused)
 {
-	return do_rt_sigreturn(&regs);
+	struct pt_regs *regs = (struct pt_regs *)&__unused;
+
+	return do_rt_sigreturn(regs);
 }
 #else /* !CONFIG_X86_32 */
 asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S
index d44395f..e2e86a0 100644
--- a/arch/x86/kernel/syscall_table_32.S
+++ b/arch/x86/kernel/syscall_table_32.S
@@ -88,7 +88,7 @@
 	.long sys_uselib
 	.long sys_swapon
 	.long sys_reboot
-	.long old_readdir
+	.long sys_old_readdir
 	.long old_mmap		/* 90 */
 	.long sys_munmap
 	.long sys_truncate
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index f885023..6812b82 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -200,6 +200,7 @@
 				destination_timeouts = 0;
 			}
 		}
+		cpu_relax();
 	}
 	return FLUSH_COMPLETE;
 }
diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c
index 23206ba..1d3302c 100644
--- a/arch/x86/kernel/vmi_32.c
+++ b/arch/x86/kernel/vmi_32.c
@@ -858,7 +858,7 @@
 #endif
 }
 
-void vmi_activate(void)
+void __init vmi_activate(void)
 {
 	unsigned long flags;
 
diff --git a/arch/x86/lib/usercopy_32.c b/arch/x86/lib/usercopy_32.c
index 4a20b2f..7c8ca91 100644
--- a/arch/x86/lib/usercopy_32.c
+++ b/arch/x86/lib/usercopy_32.c
@@ -56,7 +56,7 @@
 		"	jmp 2b\n"					   \
 		".previous\n"						   \
 		_ASM_EXTABLE(0b,3b)					   \
-		: "=d"(res), "=c"(count), "=&a" (__d0), "=&S" (__d1),	   \
+		: "=&d"(res), "=&c"(count), "=&a" (__d0), "=&S" (__d1),	   \
 		  "=&D" (__d2)						   \
 		: "i"(-EFAULT), "0"(count), "1"(count), "3"(src), "4"(dst) \
 		: "memory");						   \
@@ -218,7 +218,7 @@
 		"	.align 4\n"
 		"	.long 0b,2b\n"
 		".previous"
-		:"=r" (n), "=D" (s), "=a" (res), "=c" (tmp)
+		:"=&r" (n), "=&D" (s), "=&a" (res), "=&c" (tmp)
 		:"0" (n), "1" (s), "2" (0), "3" (mask)
 		:"cc");
 	return res & mask;
diff --git a/arch/x86/lib/usercopy_64.c b/arch/x86/lib/usercopy_64.c
index 64d6c84..ec13cb5 100644
--- a/arch/x86/lib/usercopy_64.c
+++ b/arch/x86/lib/usercopy_64.c
@@ -32,7 +32,7 @@
 		"	jmp 2b\n"					   \
 		".previous\n"						   \
 		_ASM_EXTABLE(0b,3b)					   \
-		: "=r"(res), "=c"(count), "=&a" (__d0), "=&S" (__d1),	   \
+		: "=&r"(res), "=&c"(count), "=&a" (__d0), "=&S" (__d1),	   \
 		  "=&D" (__d2)						   \
 		: "i"(-EFAULT), "0"(count), "1"(count), "3"(src), "4"(dst) \
 		: "memory");						   \
@@ -86,7 +86,7 @@
 		".previous\n"
 		_ASM_EXTABLE(0b,3b)
 		_ASM_EXTABLE(1b,2b)
-		: [size8] "=c"(size), [dst] "=&D" (__d0)
+		: [size8] "=&c"(size), [dst] "=&D" (__d0)
 		: [size1] "r"(size & 7), "[size8]" (size / 8), "[dst]"(addr),
 		  [zero] "r" (0UL), [eight] "r" (8UL));
 	return size;
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 88f1b10..2cef050 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -138,6 +138,47 @@
 	return pte_offset_kernel(pmd, 0);
 }
 
+static pte_t *__init page_table_kmap_check(pte_t *pte, pmd_t *pmd,
+					   unsigned long vaddr, pte_t *lastpte)
+{
+#ifdef CONFIG_HIGHMEM
+	/*
+	 * Something (early fixmap) may already have put a pte
+	 * page here, which causes the page table allocation
+	 * to become nonlinear. Attempt to fix it, and if it
+	 * is still nonlinear then we have to bug.
+	 */
+	int pmd_idx_kmap_begin = fix_to_virt(FIX_KMAP_END) >> PMD_SHIFT;
+	int pmd_idx_kmap_end = fix_to_virt(FIX_KMAP_BEGIN) >> PMD_SHIFT;
+
+	if (pmd_idx_kmap_begin != pmd_idx_kmap_end
+	    && (vaddr >> PMD_SHIFT) >= pmd_idx_kmap_begin
+	    && (vaddr >> PMD_SHIFT) <= pmd_idx_kmap_end
+	    && ((__pa(pte) >> PAGE_SHIFT) < table_start
+		|| (__pa(pte) >> PAGE_SHIFT) >= table_end)) {
+		pte_t *newpte;
+		int i;
+
+		BUG_ON(after_init_bootmem);
+		newpte = alloc_low_page();
+		for (i = 0; i < PTRS_PER_PTE; i++)
+			set_pte(newpte + i, pte[i]);
+
+		paravirt_alloc_pte(&init_mm, __pa(newpte) >> PAGE_SHIFT);
+		set_pmd(pmd, __pmd(__pa(newpte)|_PAGE_TABLE));
+		BUG_ON(newpte != pte_offset_kernel(pmd, 0));
+		__flush_tlb_all();
+
+		paravirt_release_pte(__pa(pte) >> PAGE_SHIFT);
+		pte = newpte;
+	}
+	BUG_ON(vaddr < fix_to_virt(FIX_KMAP_BEGIN - 1)
+	       && vaddr > fix_to_virt(FIX_KMAP_END)
+	       && lastpte && lastpte + PTRS_PER_PTE != pte);
+#endif
+	return pte;
+}
+
 /*
  * This function initializes a certain range of kernel virtual memory
  * with new bootmem page tables, everywhere page tables are missing in
@@ -154,6 +195,7 @@
 	unsigned long vaddr;
 	pgd_t *pgd;
 	pmd_t *pmd;
+	pte_t *pte = NULL;
 
 	vaddr = start;
 	pgd_idx = pgd_index(vaddr);
@@ -165,7 +207,8 @@
 		pmd = pmd + pmd_index(vaddr);
 		for (; (pmd_idx < PTRS_PER_PMD) && (vaddr != end);
 							pmd++, pmd_idx++) {
-			one_page_table_init(pmd);
+			pte = page_table_kmap_check(one_page_table_init(pmd),
+			                            pmd, vaddr, pte);
 
 			vaddr += PMD_SIZE;
 		}
@@ -508,7 +551,6 @@
 	 * Fixed mappings, only the page table structure has to be
 	 * created - mappings will be set by set_fixmap():
 	 */
-	early_ioremap_clear();
 	vaddr = __fix_to_virt(__end_of_fixed_addresses - 1) & PMD_MASK;
 	end = (FIXADDR_TOP + PMD_SIZE - 1) & PMD_MASK;
 	page_table_range_init(vaddr, end, pgd_base);
@@ -801,7 +843,7 @@
 	tables += PAGE_ALIGN(ptes * sizeof(pte_t));
 
 	/* for fixmap */
-	tables += PAGE_SIZE * 2;
+	tables += PAGE_ALIGN(__end_of_fixed_addresses * sizeof(pte_t));
 
 	/*
 	 * RED-PEN putting page tables only on node 0 could
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 23f68e7..e6d36b4 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -596,7 +596,7 @@
 		direct_gbpages = 0;
 }
 
-static unsigned long __init kernel_physical_mapping_init(unsigned long start,
+static unsigned long __meminit kernel_physical_mapping_init(unsigned long start,
 						unsigned long end,
 						unsigned long page_size_mask)
 {
diff --git a/arch/x86/mm/iomap_32.c b/arch/x86/mm/iomap_32.c
index d0151d8..ca53224 100644
--- a/arch/x86/mm/iomap_32.c
+++ b/arch/x86/mm/iomap_32.c
@@ -17,6 +17,7 @@
  */
 
 #include <asm/iomap.h>
+#include <asm/pat.h>
 #include <linux/module.h>
 
 /* Map 'pfn' using fixed map 'type' and protections 'prot'
@@ -29,6 +30,15 @@
 
 	pagefault_disable();
 
+	/*
+	 * For non-PAT systems, promote PAGE_KERNEL_WC to PAGE_KERNEL_UC_MINUS.
+	 * PAGE_KERNEL_WC maps to PWT, which translates to uncached if the
+	 * MTRR is UC or WC.  UC_MINUS gets the real intention, of the
+	 * user, which is "WC if the MTRR is WC, UC if you can't do that."
+	 */
+	if (!pat_enabled && pgprot_val(prot) == pgprot_val(PAGE_KERNEL_WC))
+		prot = PAGE_KERNEL_UC_MINUS;
+
 	idx = type + KM_TYPE_NR*smp_processor_id();
 	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
 	set_pte(kmap_pte-idx, pfn_pte(pfn, prot));
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index bd85d42..af750ab 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -557,34 +557,9 @@
 	}
 }
 
-void __init early_ioremap_clear(void)
-{
-	pmd_t *pmd;
-
-	if (early_ioremap_debug)
-		printk(KERN_INFO "early_ioremap_clear()\n");
-
-	pmd = early_ioremap_pmd(fix_to_virt(FIX_BTMAP_BEGIN));
-	pmd_clear(pmd);
-	paravirt_release_pte(__pa(bm_pte) >> PAGE_SHIFT);
-	__flush_tlb_all();
-}
-
 void __init early_ioremap_reset(void)
 {
-	enum fixed_addresses idx;
-	unsigned long addr, phys;
-	pte_t *pte;
-
 	after_paging_init = 1;
-	for (idx = FIX_BTMAP_BEGIN; idx >= FIX_BTMAP_END; idx--) {
-		addr = fix_to_virt(idx);
-		pte = early_ioremap_pte(addr);
-		if (pte_present(*pte)) {
-			phys = pte_val(*pte) & PAGE_MASK;
-			set_fixmap(idx, phys);
-		}
-	}
 }
 
 static void __init __early_set_fixmap(enum fixed_addresses idx,
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index e89d248..84ba748 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -534,6 +534,36 @@
 	return 0;
 }
 
+static int __cpa_process_fault(struct cpa_data *cpa, unsigned long vaddr,
+			       int primary)
+{
+	/*
+	 * Ignore all non primary paths.
+	 */
+	if (!primary)
+		return 0;
+
+	/*
+	 * Ignore the NULL PTE for kernel identity mapping, as it is expected
+	 * to have holes.
+	 * Also set numpages to '1' indicating that we processed cpa req for
+	 * one virtual address page and its pfn. TBD: numpages can be set based
+	 * on the initial value and the level returned by lookup_address().
+	 */
+	if (within(vaddr, PAGE_OFFSET,
+		   PAGE_OFFSET + (max_pfn_mapped << PAGE_SHIFT))) {
+		cpa->numpages = 1;
+		cpa->pfn = __pa(vaddr) >> PAGE_SHIFT;
+		return 0;
+	} else {
+		WARN(1, KERN_WARNING "CPA: called for zero pte. "
+			"vaddr = %lx cpa->vaddr = %lx\n", vaddr,
+			*cpa->vaddr);
+
+		return -EFAULT;
+	}
+}
+
 static int __change_page_attr(struct cpa_data *cpa, int primary)
 {
 	unsigned long address;
@@ -549,17 +579,11 @@
 repeat:
 	kpte = lookup_address(address, &level);
 	if (!kpte)
-		return 0;
+		return __cpa_process_fault(cpa, address, primary);
 
 	old_pte = *kpte;
-	if (!pte_val(old_pte)) {
-		if (!primary)
-			return 0;
-		WARN(1, KERN_WARNING "CPA: called for zero pte. "
-		       "vaddr = %lx cpa->vaddr = %lx\n", address,
-		       *cpa->vaddr);
-		return -EINVAL;
-	}
+	if (!pte_val(old_pte))
+		return __cpa_process_fault(cpa, address, primary);
 
 	if (level == PG_LEVEL_4K) {
 		pte_t new_pte;
@@ -657,12 +681,7 @@
 		vaddr = *cpa->vaddr;
 
 	if (!(within(vaddr, PAGE_OFFSET,
-		    PAGE_OFFSET + (max_low_pfn_mapped << PAGE_SHIFT))
-#ifdef CONFIG_X86_64
-		|| within(vaddr, PAGE_OFFSET + (1UL<<32),
-		    PAGE_OFFSET + (max_pfn_mapped << PAGE_SHIFT))
-#endif
-	)) {
+		    PAGE_OFFSET + (max_pfn_mapped << PAGE_SHIFT)))) {
 
 		alias_cpa = *cpa;
 		temp_cpa_vaddr = (unsigned long) __va(cpa->pfn << PAGE_SHIFT);
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 85cbd3c..7b61036 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -333,11 +333,23 @@
 					      req_type & _PAGE_CACHE_MASK);
 	}
 
-	is_range_ram = pagerange_is_ram(start, end);
-	if (is_range_ram == 1)
-		return reserve_ram_pages_type(start, end, req_type, new_type);
-	else if (is_range_ram < 0)
-		return -EINVAL;
+	if (new_type)
+		*new_type = actual_type;
+
+	/*
+	 * For legacy reasons, some parts of the physical address range in the
+	 * legacy 1MB region is treated as non-RAM (even when listed as RAM in
+	 * the e820 tables).  So we will track the memory attributes of this
+	 * legacy 1MB region using the linear memtype_list always.
+	 */
+	if (end >= ISA_END_ADDRESS) {
+		is_range_ram = pagerange_is_ram(start, end);
+		if (is_range_ram == 1)
+			return reserve_ram_pages_type(start, end, req_type,
+						      new_type);
+		else if (is_range_ram < 0)
+			return -EINVAL;
+	}
 
 	new  = kmalloc(sizeof(struct memtype), GFP_KERNEL);
 	if (!new)
@@ -347,9 +359,6 @@
 	new->end	= end;
 	new->type	= actual_type;
 
-	if (new_type)
-		*new_type = actual_type;
-
 	spin_lock(&memtype_lock);
 
 	if (cached_entry && start >= cached_start)
@@ -437,11 +446,19 @@
 	if (is_ISA_range(start, end - 1))
 		return 0;
 
-	is_range_ram = pagerange_is_ram(start, end);
-	if (is_range_ram == 1)
-		return free_ram_pages_type(start, end);
-	else if (is_range_ram < 0)
-		return -EINVAL;
+	/*
+	 * For legacy reasons, some parts of the physical address range in the
+	 * legacy 1MB region is treated as non-RAM (even when listed as RAM in
+	 * the e820 tables).  So we will track the memory attributes of this
+	 * legacy 1MB region using the linear memtype_list always.
+	 */
+	if (end >= ISA_END_ADDRESS) {
+		is_range_ram = pagerange_is_ram(start, end);
+		if (is_range_ram == 1)
+			return free_ram_pages_type(start, end);
+		else if (is_range_ram < 0)
+			return -EINVAL;
+	}
 
 	spin_lock(&memtype_lock);
 	list_for_each_entry(entry, &memtype_list, nd) {
@@ -601,12 +618,13 @@
  * Reserved non RAM regions only and after successful reserve_memtype,
  * this func also keeps identity mapping (if any) in sync with this new prot.
  */
-static int reserve_pfn_range(u64 paddr, unsigned long size, pgprot_t vma_prot)
+static int reserve_pfn_range(u64 paddr, unsigned long size, pgprot_t *vma_prot,
+				int strict_prot)
 {
 	int is_ram = 0;
 	int id_sz, ret;
 	unsigned long flags;
-	unsigned long want_flags = (pgprot_val(vma_prot) & _PAGE_CACHE_MASK);
+	unsigned long want_flags = (pgprot_val(*vma_prot) & _PAGE_CACHE_MASK);
 
 	is_ram = pagerange_is_ram(paddr, paddr + size);
 
@@ -625,15 +643,24 @@
 		return ret;
 
 	if (flags != want_flags) {
-		free_memtype(paddr, paddr + size);
-		printk(KERN_ERR
-		"%s:%d map pfn expected mapping type %s for %Lx-%Lx, got %s\n",
-			current->comm, current->pid,
-			cattr_name(want_flags),
-			(unsigned long long)paddr,
-			(unsigned long long)(paddr + size),
-			cattr_name(flags));
-		return -EINVAL;
+		if (strict_prot || !is_new_memtype_allowed(want_flags, flags)) {
+			free_memtype(paddr, paddr + size);
+			printk(KERN_ERR "%s:%d map pfn expected mapping type %s"
+				" for %Lx-%Lx, got %s\n",
+				current->comm, current->pid,
+				cattr_name(want_flags),
+				(unsigned long long)paddr,
+				(unsigned long long)(paddr + size),
+				cattr_name(flags));
+			return -EINVAL;
+		}
+		/*
+		 * We allow returning different type than the one requested in
+		 * non strict case.
+		 */
+		*vma_prot = __pgprot((pgprot_val(*vma_prot) &
+				      (~_PAGE_CACHE_MASK)) |
+				     flags);
 	}
 
 	/* Need to keep identity mapping in sync */
@@ -689,6 +716,7 @@
 	unsigned long vma_start = vma->vm_start;
 	unsigned long vma_end = vma->vm_end;
 	unsigned long vma_size = vma_end - vma_start;
+	pgprot_t pgprot;
 
 	if (!pat_enabled)
 		return 0;
@@ -702,7 +730,8 @@
 			WARN_ON_ONCE(1);
 			return -EINVAL;
 		}
-		return reserve_pfn_range(paddr, vma_size, __pgprot(prot));
+		pgprot = __pgprot(prot);
+		return reserve_pfn_range(paddr, vma_size, &pgprot, 1);
 	}
 
 	/* reserve entire vma page by page, using pfn and prot from pte */
@@ -710,7 +739,8 @@
 		if (follow_phys(vma, vma_start + i, 0, &prot, &paddr))
 			continue;
 
-		retval = reserve_pfn_range(paddr, PAGE_SIZE, __pgprot(prot));
+		pgprot = __pgprot(prot);
+		retval = reserve_pfn_range(paddr, PAGE_SIZE, &pgprot, 1);
 		if (retval)
 			goto cleanup_ret;
 	}
@@ -741,7 +771,7 @@
  * Note that this function can be called with caller trying to map only a
  * subrange/page inside the vma.
  */
-int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t prot,
+int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t *prot,
 			unsigned long pfn, unsigned long size)
 {
 	int retval = 0;
@@ -758,14 +788,14 @@
 	if (is_linear_pfn_mapping(vma)) {
 		/* reserve the whole chunk starting from vm_pgoff */
 		paddr = (resource_size_t)vma->vm_pgoff << PAGE_SHIFT;
-		return reserve_pfn_range(paddr, vma_size, prot);
+		return reserve_pfn_range(paddr, vma_size, prot, 0);
 	}
 
 	/* reserve page by page using pfn and size */
 	base_paddr = (resource_size_t)pfn << PAGE_SHIFT;
 	for (i = 0; i < size; i += PAGE_SIZE) {
 		paddr = base_paddr + i;
-		retval = reserve_pfn_range(paddr, PAGE_SIZE, prot);
+		retval = reserve_pfn_range(paddr, PAGE_SIZE, prot, 0);
 		if (retval)
 			goto cleanup_ret;
 	}
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index f884740..5ead808 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -314,17 +314,7 @@
 		return retval;
 
 	if (flags != new_flags) {
-		/*
-		 * Do not fallback to certain memory types with certain
-		 * requested type:
-		 * - request is uncached, return cannot be write-back
-		 * - request is uncached, return cannot be write-combine
-		 * - request is write-combine, return cannot be write-back
-		 */
-		if ((flags == _PAGE_CACHE_UC_MINUS &&
-		     (new_flags == _PAGE_CACHE_WB)) ||
-		    (flags == _PAGE_CACHE_WC &&
-		     new_flags == _PAGE_CACHE_WB)) {
+		if (!is_new_memtype_allowed(flags, new_flags)) {
 			free_memtype(addr, addr+len);
 			return -EINVAL;
 		}
diff --git a/arch/x86/scripts/strip-symbols b/arch/x86/scripts/strip-symbols
deleted file mode 100644
index a2f1ccb..0000000
--- a/arch/x86/scripts/strip-symbols
+++ /dev/null
@@ -1 +0,0 @@
-__cpu_vendor_dev_X86_VENDOR_*
diff --git a/arch/xtensa/include/asm/Kbuild b/arch/xtensa/include/asm/Kbuild
index 58c02a4..c68e168 100644
--- a/arch/xtensa/include/asm/Kbuild
+++ b/arch/xtensa/include/asm/Kbuild
@@ -1,3 +1 @@
 include include/asm-generic/Kbuild.asm
-
-unifdef-y += swab.h
diff --git a/arch/xtensa/include/asm/byteorder.h b/arch/xtensa/include/asm/byteorder.h
index 329b945..54eb631 100644
--- a/arch/xtensa/include/asm/byteorder.h
+++ b/arch/xtensa/include/asm/byteorder.h
@@ -1,8 +1,6 @@
 #ifndef _XTENSA_BYTEORDER_H
 #define _XTENSA_BYTEORDER_H
 
-#include <asm/swab.h>
-
 #ifdef __XTENSA_EL__
 #include <linux/byteorder/little_endian.h>
 #elif defined(__XTENSA_EB__)
diff --git a/crypto/authenc.c b/crypto/authenc.c
index 40b6e9ec..5793b64 100644
--- a/crypto/authenc.c
+++ b/crypto/authenc.c
@@ -158,16 +158,19 @@
 	dstp = sg_page(dst);
 	vdst = PageHighMem(dstp) ? NULL : page_address(dstp) + dst->offset;
 
-	sg_init_table(cipher, 2);
-	sg_set_buf(cipher, iv, ivsize);
-	authenc_chain(cipher, dst, vdst == iv + ivsize);
+	if (ivsize) {
+		sg_init_table(cipher, 2);
+		sg_set_buf(cipher, iv, ivsize);
+		authenc_chain(cipher, dst, vdst == iv + ivsize);
+		dst = cipher;
+	}
 
 	cryptlen = req->cryptlen + ivsize;
-	hash = crypto_authenc_hash(req, flags, cipher, cryptlen);
+	hash = crypto_authenc_hash(req, flags, dst, cryptlen);
 	if (IS_ERR(hash))
 		return PTR_ERR(hash);
 
-	scatterwalk_map_and_copy(hash, cipher, cryptlen,
+	scatterwalk_map_and_copy(hash, dst, cryptlen,
 				 crypto_aead_authsize(authenc), 1);
 	return 0;
 }
@@ -285,11 +288,14 @@
 	srcp = sg_page(src);
 	vsrc = PageHighMem(srcp) ? NULL : page_address(srcp) + src->offset;
 
-	sg_init_table(cipher, 2);
-	sg_set_buf(cipher, iv, ivsize);
-	authenc_chain(cipher, src, vsrc == iv + ivsize);
+	if (ivsize) {
+		sg_init_table(cipher, 2);
+		sg_set_buf(cipher, iv, ivsize);
+		authenc_chain(cipher, src, vsrc == iv + ivsize);
+		src = cipher;
+	}
 
-	return crypto_authenc_verify(req, cipher, cryptlen + ivsize);
+	return crypto_authenc_verify(req, src, cryptlen + ivsize);
 }
 
 static int crypto_authenc_decrypt(struct aead_request *req)
diff --git a/crypto/blkcipher.c b/crypto/blkcipher.c
index 4a7e65c..d70a41c 100644
--- a/crypto/blkcipher.c
+++ b/crypto/blkcipher.c
@@ -124,6 +124,7 @@
 	scatterwalk_done(&walk->in, 0, nbytes);
 	scatterwalk_done(&walk->out, 1, nbytes);
 
+err:
 	walk->total = nbytes;
 	walk->nbytes = nbytes;
 
@@ -132,7 +133,6 @@
 		return blkcipher_walk_next(desc, walk);
 	}
 
-err:
 	if (walk->iv != desc->info)
 		memcpy(desc->info, walk->iv, crypto_blkcipher_ivsize(tfm));
 	if (walk->buffer != walk->page)
diff --git a/crypto/ccm.c b/crypto/ccm.c
index 7cf7e5a..c36d654 100644
--- a/crypto/ccm.c
+++ b/crypto/ccm.c
@@ -266,6 +266,8 @@
 	if (assoclen) {
 		pctx->ilen = format_adata(idata, assoclen);
 		get_data_to_compute(cipher, pctx, req->assoc, req->assoclen);
+	} else {
+		pctx->ilen = 0;
 	}
 
 	/* compute plaintext into mac */
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index d80f4cc..65d90c7 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -19,7 +19,7 @@
 
 # sleep related files
 obj-y				+= wakeup.o
-obj-y				+= main.o
+obj-y				+= sleep.o
 obj-$(CONFIG_ACPI_SLEEP)	+= proc.o
 
 
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 8dfcbb8..a2b82c9 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -120,31 +120,6 @@
 	spinlock_t curr_lock;
 } *boot_ec, *first_ec;
 
-/* 
- * Some Asus system have exchanged ECDT data/command IO addresses.
- */
-static int print_ecdt_error(const struct dmi_system_id *id)
-{
-	printk(KERN_NOTICE PREFIX "%s detected - "
-		"ECDT has exchanged control/data I/O address\n",
-		id->ident);
-	return 0;
-}
-
-static struct dmi_system_id __cpuinitdata ec_dmi_table[] = {
-	{
-	print_ecdt_error, "Asus L4R", {
-	DMI_MATCH(DMI_BIOS_VERSION, "1008.006"),
-	DMI_MATCH(DMI_PRODUCT_NAME, "L4R"),
-	DMI_MATCH(DMI_BOARD_NAME, "L4R") }, NULL},
-	{
-	print_ecdt_error, "Asus M6R", {
-	DMI_MATCH(DMI_BIOS_VERSION, "0207"),
-	DMI_MATCH(DMI_PRODUCT_NAME, "M6R"),
-	DMI_MATCH(DMI_BOARD_NAME, "M6R") }, NULL},
-	{},
-};
-
 /* --------------------------------------------------------------------------
                              Transaction Management
    -------------------------------------------------------------------------- */
@@ -983,8 +958,8 @@
 int __init acpi_ec_ecdt_probe(void)
 {
 	acpi_status status;
+	struct acpi_ec *saved_ec = NULL;
 	struct acpi_table_ecdt *ecdt_ptr;
-	acpi_handle dummy;
 
 	boot_ec = make_acpi_ec();
 	if (!boot_ec)
@@ -998,21 +973,16 @@
 		pr_info(PREFIX "EC description table is found, configuring boot EC\n");
 		boot_ec->command_addr = ecdt_ptr->control.address;
 		boot_ec->data_addr = ecdt_ptr->data.address;
-		if (dmi_check_system(ec_dmi_table)) {
-			/*
-			 * If the board falls into ec_dmi_table, it means
-			 * that ECDT table gives the incorrect command/status
-			 * & data I/O address. Just fix it.
-			 */
-			boot_ec->data_addr = ecdt_ptr->control.address;
-			boot_ec->command_addr = ecdt_ptr->data.address;
-		}
 		boot_ec->gpe = ecdt_ptr->gpe;
 		boot_ec->handle = ACPI_ROOT_OBJECT;
 		acpi_get_handle(ACPI_ROOT_OBJECT, ecdt_ptr->id, &boot_ec->handle);
-		/* Add some basic check against completely broken table */
-		if (boot_ec->data_addr != boot_ec->command_addr)
+		/* Don't trust ECDT, which comes from ASUSTek */
+		if (!dmi_name_in_vendors("ASUS"))
 			goto install;
+		saved_ec = kmalloc(sizeof(struct acpi_ec), GFP_KERNEL);
+		if (!saved_ec)
+			return -ENOMEM;
+		memcpy(&saved_ec, boot_ec, sizeof(saved_ec));
 	/* fall through */
 	}
 	/* This workaround is needed only on some broken machines,
@@ -1023,12 +993,29 @@
 	/* Check that acpi_get_devices actually find something */
 	if (ACPI_FAILURE(status) || !boot_ec->handle)
 		goto error;
-	/* We really need to limit this workaround, the only ASUS,
-	 * which needs it, has fake EC._INI method, so use it as flag.
-	 * Keep boot_ec struct as it will be needed soon.
-	 */
-	if (ACPI_FAILURE(acpi_get_handle(boot_ec->handle, "_INI", &dummy)))
-		return -ENODEV;
+	if (saved_ec) {
+		/* try to find good ECDT from ASUSTek */
+		if (saved_ec->command_addr != boot_ec->command_addr ||
+		    saved_ec->data_addr != boot_ec->data_addr ||
+		    saved_ec->gpe != boot_ec->gpe ||
+		    saved_ec->handle != boot_ec->handle)
+			pr_info(PREFIX "ASUSTek keeps feeding us with broken "
+			"ECDT tables, which are very hard to workaround. "
+			"Trying to use DSDT EC info instead. Please send "
+			"output of acpidump to linux-acpi@vger.kernel.org\n");
+		kfree(saved_ec);
+		saved_ec = NULL;
+	} else {
+		/* We really need to limit this workaround, the only ASUS,
+		* which needs it, has fake EC._INI method, so use it as flag.
+		* Keep boot_ec struct as it will be needed soon.
+		*/
+		acpi_handle dummy;
+		if (!dmi_name_in_vendors("ASUS") ||
+		    ACPI_FAILURE(acpi_get_handle(boot_ec->handle, "_INI",
+							&dummy)))
+			return -ENODEV;
+	}
 install:
 	if (!ec_install_handlers(boot_ec)) {
 		first_ec = boot_ec;
diff --git a/drivers/acpi/main.c b/drivers/acpi/sleep.c
similarity index 100%
rename from drivers/acpi/main.c
rename to drivers/acpi/sleep.c
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 073ff09..99e6f1f 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -416,7 +416,8 @@
 	}
 
 	/* Passive (optional) */
-	if (flag & ACPI_TRIPS_PASSIVE) {
+	if (((flag & ACPI_TRIPS_PASSIVE) && tz->trips.passive.flags.valid) ||
+		(flag == ACPI_TRIPS_INIT)) {
 		valid = tz->trips.passive.flags.valid;
 		if (psv == -1) {
 			status = AE_SUPPORT;
@@ -462,8 +463,11 @@
 		memset(&devices, 0, sizeof(struct acpi_handle_list));
 		status = acpi_evaluate_reference(tz->device->handle, "_PSL",
 							NULL, &devices);
-		if (ACPI_FAILURE(status))
+		if (ACPI_FAILURE(status)) {
+			printk(KERN_WARNING PREFIX
+				"Invalid passive threshold\n");
 			tz->trips.passive.flags.valid = 0;
+		}
 		else
 			tz->trips.passive.flags.valid = 1;
 
@@ -487,7 +491,8 @@
 		if (act == -1)
 			break; /* disable all active trip points */
 
-		if (flag & ACPI_TRIPS_ACTIVE) {
+		if ((flag == ACPI_TRIPS_INIT) || ((flag & ACPI_TRIPS_ACTIVE) &&
+			tz->trips.active[i].flags.valid)) {
 			status = acpi_evaluate_integer(tz->device->handle,
 							name, NULL, &tmp);
 			if (ACPI_FAILURE(status)) {
@@ -521,8 +526,11 @@
 			memset(&devices, 0, sizeof(struct acpi_handle_list));
 			status = acpi_evaluate_reference(tz->device->handle,
 						name, NULL, &devices);
-			if (ACPI_FAILURE(status))
+			if (ACPI_FAILURE(status)) {
+				printk(KERN_WARNING PREFIX
+					"Invalid active%d threshold\n", i);
 				tz->trips.active[i].flags.valid = 0;
+			}
 			else
 				tz->trips.active[i].flags.valid = 1;
 
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 1a7be96..0bcf264 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -112,11 +112,11 @@
 	  If unsure, say N.
 
 config SATA_MV
-	tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	tristate "Marvell SATA support"
 	help
 	  This option enables support for the Marvell Serial ATA family.
-	  Currently supports 88SX[56]0[48][01] chips.
+	  Currently supports 88SX[56]0[48][01] PCI(-X) chips,
+	  as well as the newer [67]042 PCI-X/PCIe and SOC devices.
 
 	  If unsure, say N.
 
@@ -698,6 +698,15 @@
 
 	  If unsure, say N.
 
+config PATA_OCTEON_CF
+	tristate "OCTEON Boot Bus Compact Flash support"
+	depends on CPU_CAVIUM_OCTEON
+	help
+	  This option enables a polled compact flash driver for use with
+	  compact flash cards attached to the OCTEON boot bus.
+
+	  If unsure, say N.
+
 config PATA_SCC
 	tristate "Toshiba's Cell Reference Set IDE support"
 	depends on PCI && PPC_CELLEB
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 674965f..7f1ecf9 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -69,6 +69,7 @@
 obj-$(CONFIG_PATA_SCC)		+= pata_scc.o
 obj-$(CONFIG_PATA_SCH)		+= pata_sch.o
 obj-$(CONFIG_PATA_BF54X)	+= pata_bf54x.o
+obj-$(CONFIG_PATA_OCTEON_CF)	+= pata_octeon_cf.o
 obj-$(CONFIG_PATA_PLATFORM)	+= pata_platform.o
 obj-$(CONFIG_PATA_OF_PLATFORM)	+= pata_of_platform.o
 obj-$(CONFIG_PATA_ICSIDE)	+= pata_icside.o
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 9603967..77bba4c 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -2548,6 +2548,32 @@
 	}
 }
 
+static bool ahci_broken_system_poweroff(struct pci_dev *pdev)
+{
+	static const struct dmi_system_id broken_systems[] = {
+		{
+			.ident = "HP Compaq nx6310",
+			.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+				DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6310"),
+			},
+			/* PCI slot number of the controller */
+			.driver_data = (void *)0x1FUL,
+		},
+
+		{ }	/* terminate list */
+	};
+	const struct dmi_system_id *dmi = dmi_first_match(broken_systems);
+
+	if (dmi) {
+		unsigned long slot = (unsigned long)dmi->driver_data;
+		/* apply the quirk only to on-board controllers */
+		return slot == PCI_SLOT(pdev->devfn);
+	}
+
+	return false;
+}
+
 static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
@@ -2647,6 +2673,12 @@
 		}
 	}
 
+	if (ahci_broken_system_poweroff(pdev)) {
+		pi.flags |= ATA_FLAG_NO_POWEROFF_SPINDOWN;
+		dev_info(&pdev->dev,
+			"quirky BIOS, skipping spindown on poweroff\n");
+	}
+
 	/* CAP.NP sometimes indicate the index of the last enabled
 	 * port, at other times, that of the last possible port, so
 	 * determining the maximum port number requires looking at
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 887d8f4..54961c0 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -1387,6 +1387,32 @@
 	}
 }
 
+static bool piix_broken_system_poweroff(struct pci_dev *pdev)
+{
+	static const struct dmi_system_id broken_systems[] = {
+		{
+			.ident = "HP Compaq 2510p",
+			.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+				DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 2510p"),
+			},
+			/* PCI slot number of the controller */
+			.driver_data = (void *)0x1FUL,
+		},
+
+		{ }	/* terminate list */
+	};
+	const struct dmi_system_id *dmi = dmi_first_match(broken_systems);
+
+	if (dmi) {
+		unsigned long slot = (unsigned long)dmi->driver_data;
+		/* apply the quirk only to on-board controllers */
+		return slot == PCI_SLOT(pdev->devfn);
+	}
+
+	return false;
+}
+
 /**
  *	piix_init_one - Register PIIX ATA PCI device with kernel services
  *	@pdev: PCI device to register
@@ -1422,6 +1448,14 @@
 	if (!in_module_init)
 		return -ENODEV;
 
+	if (piix_broken_system_poweroff(pdev)) {
+		piix_port_info[ent->driver_data].flags |=
+				ATA_FLAG_NO_POWEROFF_SPINDOWN |
+					ATA_FLAG_NO_HIBERNATE_SPINDOWN;
+		dev_info(&pdev->dev, "quirky BIOS, skipping spindown "
+				"on poweroff and hibernation\n");
+	}
+
 	port_info[0] = piix_port_info[ent->driver_data];
 	port_info[1] = piix_port_info[ent->driver_data];
 
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 71218d7..88c2428 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3029,33 +3029,33 @@
  */
 
 static const struct ata_timing ata_timing[] = {
-/*	{ XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960,   0 }, */
-	{ XFER_PIO_0,     70, 290, 240, 600, 165, 150, 600,   0 },
-	{ XFER_PIO_1,     50, 290,  93, 383, 125, 100, 383,   0 },
-	{ XFER_PIO_2,     30, 290,  40, 330, 100,  90, 240,   0 },
-	{ XFER_PIO_3,     30,  80,  70, 180,  80,  70, 180,   0 },
-	{ XFER_PIO_4,     25,  70,  25, 120,  70,  25, 120,   0 },
-	{ XFER_PIO_5,     15,  65,  25, 100,  65,  25, 100,   0 },
-	{ XFER_PIO_6,     10,  55,  20,  80,  55,  20,  80,   0 },
+/*	{ XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 0,  960,   0 }, */
+	{ XFER_PIO_0,     70, 290, 240, 600, 165, 150, 0,  600,   0 },
+	{ XFER_PIO_1,     50, 290,  93, 383, 125, 100, 0,  383,   0 },
+	{ XFER_PIO_2,     30, 290,  40, 330, 100,  90, 0,  240,   0 },
+	{ XFER_PIO_3,     30,  80,  70, 180,  80,  70, 0,  180,   0 },
+	{ XFER_PIO_4,     25,  70,  25, 120,  70,  25, 0,  120,   0 },
+	{ XFER_PIO_5,     15,  65,  25, 100,  65,  25, 0,  100,   0 },
+	{ XFER_PIO_6,     10,  55,  20,  80,  55,  20, 0,   80,   0 },
 
-	{ XFER_SW_DMA_0, 120,   0,   0,   0, 480, 480, 960,   0 },
-	{ XFER_SW_DMA_1,  90,   0,   0,   0, 240, 240, 480,   0 },
-	{ XFER_SW_DMA_2,  60,   0,   0,   0, 120, 120, 240,   0 },
+	{ XFER_SW_DMA_0, 120,   0,   0,   0, 480, 480, 50, 960,   0 },
+	{ XFER_SW_DMA_1,  90,   0,   0,   0, 240, 240, 30, 480,   0 },
+	{ XFER_SW_DMA_2,  60,   0,   0,   0, 120, 120, 20, 240,   0 },
 
-	{ XFER_MW_DMA_0,  60,   0,   0,   0, 215, 215, 480,   0 },
-	{ XFER_MW_DMA_1,  45,   0,   0,   0,  80,  50, 150,   0 },
-	{ XFER_MW_DMA_2,  25,   0,   0,   0,  70,  25, 120,   0 },
-	{ XFER_MW_DMA_3,  25,   0,   0,   0,  65,  25, 100,   0 },
-	{ XFER_MW_DMA_4,  25,   0,   0,   0,  55,  20,  80,   0 },
+	{ XFER_MW_DMA_0,  60,   0,   0,   0, 215, 215, 20, 480,   0 },
+	{ XFER_MW_DMA_1,  45,   0,   0,   0,  80,  50, 5,  150,   0 },
+	{ XFER_MW_DMA_2,  25,   0,   0,   0,  70,  25, 5,  120,   0 },
+	{ XFER_MW_DMA_3,  25,   0,   0,   0,  65,  25, 5,  100,   0 },
+	{ XFER_MW_DMA_4,  25,   0,   0,   0,  55,  20, 5,   80,   0 },
 
-/*	{ XFER_UDMA_SLOW,  0,   0,   0,   0,   0,   0,   0, 150 }, */
-	{ XFER_UDMA_0,     0,   0,   0,   0,   0,   0,   0, 120 },
-	{ XFER_UDMA_1,     0,   0,   0,   0,   0,   0,   0,  80 },
-	{ XFER_UDMA_2,     0,   0,   0,   0,   0,   0,   0,  60 },
-	{ XFER_UDMA_3,     0,   0,   0,   0,   0,   0,   0,  45 },
-	{ XFER_UDMA_4,     0,   0,   0,   0,   0,   0,   0,  30 },
-	{ XFER_UDMA_5,     0,   0,   0,   0,   0,   0,   0,  20 },
-	{ XFER_UDMA_6,     0,   0,   0,   0,   0,   0,   0,  15 },
+/*	{ XFER_UDMA_SLOW,  0,   0,   0,   0,   0,   0, 0,    0, 150 }, */
+	{ XFER_UDMA_0,     0,   0,   0,   0,   0,   0, 0,    0, 120 },
+	{ XFER_UDMA_1,     0,   0,   0,   0,   0,   0, 0,    0,  80 },
+	{ XFER_UDMA_2,     0,   0,   0,   0,   0,   0, 0,    0,  60 },
+	{ XFER_UDMA_3,     0,   0,   0,   0,   0,   0, 0,    0,  45 },
+	{ XFER_UDMA_4,     0,   0,   0,   0,   0,   0, 0,    0,  30 },
+	{ XFER_UDMA_5,     0,   0,   0,   0,   0,   0, 0,    0,  20 },
+	{ XFER_UDMA_6,     0,   0,   0,   0,   0,   0, 0,    0,  15 },
 
 	{ 0xFF }
 };
@@ -3065,14 +3065,15 @@
 
 static void ata_timing_quantize(const struct ata_timing *t, struct ata_timing *q, int T, int UT)
 {
-	q->setup   = EZ(t->setup   * 1000,  T);
-	q->act8b   = EZ(t->act8b   * 1000,  T);
-	q->rec8b   = EZ(t->rec8b   * 1000,  T);
-	q->cyc8b   = EZ(t->cyc8b   * 1000,  T);
-	q->active  = EZ(t->active  * 1000,  T);
-	q->recover = EZ(t->recover * 1000,  T);
-	q->cycle   = EZ(t->cycle   * 1000,  T);
-	q->udma    = EZ(t->udma    * 1000, UT);
+	q->setup	= EZ(t->setup      * 1000,  T);
+	q->act8b	= EZ(t->act8b      * 1000,  T);
+	q->rec8b	= EZ(t->rec8b      * 1000,  T);
+	q->cyc8b	= EZ(t->cyc8b      * 1000,  T);
+	q->active	= EZ(t->active     * 1000,  T);
+	q->recover	= EZ(t->recover    * 1000,  T);
+	q->dmack_hold	= EZ(t->dmack_hold * 1000,  T);
+	q->cycle	= EZ(t->cycle      * 1000,  T);
+	q->udma		= EZ(t->udma       * 1000, UT);
 }
 
 void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b,
@@ -3084,6 +3085,7 @@
 	if (what & ATA_TIMING_CYC8B  ) m->cyc8b   = max(a->cyc8b,   b->cyc8b);
 	if (what & ATA_TIMING_ACTIVE ) m->active  = max(a->active,  b->active);
 	if (what & ATA_TIMING_RECOVER) m->recover = max(a->recover, b->recover);
+	if (what & ATA_TIMING_DMACK_HOLD) m->dmack_hold = max(a->dmack_hold, b->dmack_hold);
 	if (what & ATA_TIMING_CYCLE  ) m->cycle   = max(a->cycle,   b->cycle);
 	if (what & ATA_TIMING_UDMA   ) m->udma    = max(a->udma,    b->udma);
 }
@@ -6638,7 +6640,6 @@
 EXPORT_SYMBOL_GPL(ata_port_disable);
 EXPORT_SYMBOL_GPL(ata_ratelimit);
 EXPORT_SYMBOL_GPL(ata_wait_register);
-EXPORT_SYMBOL_GPL(ata_scsi_ioctl);
 EXPORT_SYMBOL_GPL(ata_scsi_queuecmd);
 EXPORT_SYMBOL_GPL(ata_scsi_slave_config);
 EXPORT_SYMBOL_GPL(ata_scsi_slave_destroy);
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 9e92107..3c4c5ae 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -46,6 +46,7 @@
 #include <linux/libata.h>
 #include <linux/hdreg.h>
 #include <linux/uaccess.h>
+#include <linux/suspend.h>
 
 #include "libata.h"
 
@@ -423,9 +424,9 @@
  *	RETURNS:
  *	Zero on success, negative errno on error.
  */
-static int ata_get_identity(struct scsi_device *sdev, void __user *arg)
+static int ata_get_identity(struct ata_port *ap, struct scsi_device *sdev,
+			    void __user *arg)
 {
-	struct ata_port *ap = ata_shost_to_port(sdev->host);
 	struct ata_device *dev = ata_scsi_find_dev(ap, sdev);
 	u16 __user *dst = arg;
 	char buf[40];
@@ -645,7 +646,8 @@
 	return rc;
 }
 
-int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg)
+int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *scsidev,
+		     int cmd, void __user *arg)
 {
 	int val = -EINVAL, rc = -EINVAL;
 
@@ -663,7 +665,7 @@
 		return 0;
 
 	case HDIO_GET_IDENTITY:
-		return ata_get_identity(scsidev, arg);
+		return ata_get_identity(ap, scsidev, arg);
 
 	case HDIO_DRIVE_CMD:
 		if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
@@ -682,6 +684,14 @@
 
 	return rc;
 }
+EXPORT_SYMBOL_GPL(ata_sas_scsi_ioctl);
+
+int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg)
+{
+	return ata_sas_scsi_ioctl(ata_shost_to_port(scsidev->host),
+				scsidev, cmd, arg);
+}
+EXPORT_SYMBOL_GPL(ata_scsi_ioctl);
 
 /**
  *	ata_scsi_qc_new - acquire new ata_queued_cmd reference
@@ -1294,6 +1304,17 @@
 
 		tf->command = ATA_CMD_VERIFY;	/* READ VERIFY */
 	} else {
+		/* Some odd clown BIOSen issue spindown on power off (ACPI S4
+		 * or S5) causing some drives to spin up and down again.
+		 */
+		if ((qc->ap->flags & ATA_FLAG_NO_POWEROFF_SPINDOWN) &&
+		    system_state == SYSTEM_POWER_OFF)
+			goto skip;
+
+		if ((qc->ap->flags & ATA_FLAG_NO_HIBERNATE_SPINDOWN) &&
+		     system_entering_hibernation())
+			goto skip;
+
 		/* XXX: This is for backward compatibility, will be
 		 * removed.  Read Documentation/feature-removal-schedule.txt
 		 * for more info.
@@ -1317,8 +1338,7 @@
 				scmd->scsi_done = qc->scsidone;
 				qc->scsidone = ata_delayed_done;
 			}
-			scmd->result = SAM_STAT_GOOD;
-			return 1;
+			goto skip;
 		}
 
 		/* Issue ATA STANDBY IMMEDIATE command */
@@ -1334,10 +1354,13 @@
 
 	return 0;
 
-invalid_fld:
+ invalid_fld:
 	ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0);
 	/* "Invalid field in cbd" */
 	return 1;
+ skip:
+	scmd->result = SAM_STAT_GOOD;
+	return 1;
 }
 
 
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 0eae9b4..0b299b0 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -1013,9 +1013,12 @@
 		qc->cursg_ofs = 0;
 	}
 
-	/* consumed can be larger than count only for the last transfer */
-	WARN_ON_ONCE(qc->cursg && count != consumed);
-
+	/*
+	 * There used to be a  WARN_ON_ONCE(qc->cursg && count != consumed);
+	 * Unfortunately __atapi_pio_bytes doesn't know enough to do the WARN
+	 * check correctly as it doesn't know if it is the last request being
+	 * made. Somebody should implement a proper sanity check.
+	 */
 	if (bytes)
 		goto next_sg;
 	return 0;
@@ -1319,7 +1322,7 @@
 					 * condition.  Mark hint.
 					 */
 					ata_ehi_push_desc(ehi, "ST-ATA: "
-						"DRQ=1 with device error, "
+						"DRQ=0 without device error, "
 						"dev_stat 0x%X", status);
 					qc->err_mask |= AC_ERR_HSM |
 							AC_ERR_NODEV_HINT;
@@ -1355,6 +1358,16 @@
 					qc->err_mask |= AC_ERR_HSM;
 				}
 
+				/* There are oddball controllers with
+				 * status register stuck at 0x7f and
+				 * lbal/m/h at zero which makes it
+				 * pass all other presence detection
+				 * mechanisms we have.  Set NODEV_HINT
+				 * for it.  Kernel bz#7241.
+				 */
+				if (status == 0x7f)
+					qc->err_mask |= AC_ERR_NODEV_HINT;
+
 				/* ata_pio_sectors() might change the
 				 * state to HSM_ST_LAST. so, the state
 				 * is changed after ata_pio_sectors().
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index a7999c1..eb99dbe 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -41,7 +41,7 @@
 module_param_named(atapi_dma, ali_atapi_dma, int, 0644);
 MODULE_PARM_DESC(atapi_dma, "Enable ATAPI DMA (0=disable, 1=enable)");
 
-static struct pci_dev *isa_bridge;
+static struct pci_dev *ali_isa_bridge;
 
 /*
  *	Cable special cases
@@ -346,13 +346,13 @@
 	int port_bit = 4 << link->ap->port_no;
 
 	/* If our bridge is an ALI 1533 then do the extra work */
-	if (isa_bridge) {
+	if (ali_isa_bridge) {
 		/* Tristate and re-enable the bus signals */
-		pci_read_config_byte(isa_bridge, 0x58, &r);
+		pci_read_config_byte(ali_isa_bridge, 0x58, &r);
 		r &= ~port_bit;
-		pci_write_config_byte(isa_bridge, 0x58, r);
+		pci_write_config_byte(ali_isa_bridge, 0x58, r);
 		r |= port_bit;
-		pci_write_config_byte(isa_bridge, 0x58, r);
+		pci_write_config_byte(ali_isa_bridge, 0x58, r);
 	}
 	ata_sff_postreset(link, classes);
 }
@@ -467,14 +467,14 @@
 		pci_write_config_byte(pdev, 0x53, tmp);
 	}
 	north = pci_get_bus_and_slot(0, PCI_DEVFN(0,0));
-	if (north && north->vendor == PCI_VENDOR_ID_AL && isa_bridge) {
+	if (north && north->vendor == PCI_VENDOR_ID_AL && ali_isa_bridge) {
 		/* Configure the ALi bridge logic. For non ALi rely on BIOS.
 		   Set the south bridge enable bit */
-		pci_read_config_byte(isa_bridge, 0x79, &tmp);
+		pci_read_config_byte(ali_isa_bridge, 0x79, &tmp);
 		if (pdev->revision == 0xC2)
-			pci_write_config_byte(isa_bridge, 0x79, tmp | 0x04);
+			pci_write_config_byte(ali_isa_bridge, 0x79, tmp | 0x04);
 		else if (pdev->revision > 0xC2 && pdev->revision < 0xC5)
-			pci_write_config_byte(isa_bridge, 0x79, tmp | 0x02);
+			pci_write_config_byte(ali_isa_bridge, 0x79, tmp | 0x02);
 	}
 	pci_dev_put(north);
 	ata_pci_bmdma_clear_simplex(pdev);
@@ -571,9 +571,9 @@
 
 	ali_init_chipset(pdev);
 
-	if (isa_bridge && pdev->revision >= 0x20 && pdev->revision < 0xC2) {
+	if (ali_isa_bridge && pdev->revision >= 0x20 && pdev->revision < 0xC2) {
 		/* Are we paired with a UDMA capable chip */
-		pci_read_config_byte(isa_bridge, 0x5E, &tmp);
+		pci_read_config_byte(ali_isa_bridge, 0x5E, &tmp);
 		if ((tmp & 0x1E) == 0x12)
 	        	ppi[0] = &info_20_udma;
 	}
@@ -617,11 +617,11 @@
 static int __init ali_init(void)
 {
 	int ret;
-	isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
+	ali_isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
 
 	ret = pci_register_driver(&ali_pci_driver);
 	if (ret < 0)
-		pci_dev_put(isa_bridge);
+		pci_dev_put(ali_isa_bridge);
 	return ret;
 }
 
@@ -629,7 +629,7 @@
 static void __exit ali_exit(void)
 {
 	pci_unregister_driver(&ali_pci_driver);
-	pci_dev_put(isa_bridge);
+	pci_dev_put(ali_isa_bridge);
 }
 
 
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index 0e2cde8..506adde 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -32,21 +32,6 @@
 	ATIIXP_IDE_UDMA_MODE 	= 0x56
 };
 
-static int atiixp_pre_reset(struct ata_link *link, unsigned long deadline)
-{
-	struct ata_port *ap = link->ap;
-	static const struct pci_bits atiixp_enable_bits[] = {
-		{ 0x48, 1, 0x01, 0x00 },
-		{ 0x48, 1, 0x08, 0x00 }
-	};
-	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-
-	if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no]))
-		return -ENOENT;
-
-	return ata_sff_prereset(link, deadline);
-}
-
 static int atiixp_cable_detect(struct ata_port *ap)
 {
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
@@ -229,10 +214,9 @@
 	.cable_detect	= atiixp_cable_detect,
 	.set_piomode	= atiixp_set_piomode,
 	.set_dmamode	= atiixp_set_dmamode,
-	.prereset	= atiixp_pre_reset,
 };
 
-static int atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int atiixp_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
@@ -241,8 +225,18 @@
 		.udma_mask = 0x3F,
 		.port_ops = &atiixp_port_ops
 	};
-	const struct ata_port_info *ppi[] = { &info, NULL };
-	return ata_pci_sff_init_one(dev, ppi, &atiixp_sht, NULL);
+	static const struct pci_bits atiixp_enable_bits[] = {
+		{ 0x48, 1, 0x01, 0x00 },
+		{ 0x48, 1, 0x08, 0x00 }
+	};
+	const struct ata_port_info *ppi[] = { &info, &info };
+	int i;
+
+	for (i = 0; i < 2; i++)
+		if (!pci_test_config_bits(pdev, &atiixp_enable_bits[i]))
+			ppi[i] = &ata_dummy_port_info;
+
+	return ata_pci_sff_init_one(pdev, ppi, &atiixp_sht, NULL);
 }
 
 static const struct pci_device_id atiixp[] = {
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index f828a29..f1bb2f9 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -80,7 +80,7 @@
 
 
 #define DRV_NAME "pata_it821x"
-#define DRV_VERSION "0.4.0"
+#define DRV_VERSION "0.4.2"
 
 struct it821x_dev
 {
@@ -494,8 +494,6 @@
  *	special. In our case we need to lock the sector count to avoid
  *	blowing the brains out of the firmware with large LBA48 requests
  *
- *	FIXME: When FUA appears we need to block FUA too. And SMART and
- *	basically we need to filter commands for this chip.
  */
 
 static void it821x_dev_config(struct ata_device *adev)
@@ -890,6 +888,13 @@
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
+		.udma_mask = ATA_UDMA6,
+		.port_ops = &it821x_rdc_port_ops
+	};
+	static const struct ata_port_info info_rdc_11 = {
+		.flags = ATA_FLAG_SLAVE_POSS,
+		.pio_mask = 0x1f,
+		.mwdma_mask = 0x07,
 		/* No UDMA */
 		.port_ops = &it821x_rdc_port_ops
 	};
@@ -903,7 +908,11 @@
 		return rc;
 		
 	if (pdev->vendor == PCI_VENDOR_ID_RDC) {
-		ppi[0] = &info_rdc;
+		/* Deal with Vortex86SX */
+		if (pdev->revision == 0x11)
+			ppi[0] = &info_rdc_11;
+		else
+			ppi[0] = &info_rdc;
 	} else {
 		/* Force the card into bypass mode if so requested */
 		if (it8212_noraid) {
diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c
new file mode 100644
index 0000000..0fe4ef3
--- /dev/null
+++ b/drivers/ata/pata_octeon_cf.c
@@ -0,0 +1,965 @@
+/*
+ * Driver for the Octeon bootbus compact flash.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 - 2009 Cavium Networks
+ * Copyright (C) 2008 Wind River Systems
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/libata.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <scsi/scsi_host.h>
+
+#include <asm/octeon/octeon.h>
+
+/*
+ * The Octeon bootbus compact flash interface is connected in at least
+ * 3 different configurations on various evaluation boards:
+ *
+ * -- 8  bits no irq, no DMA
+ * -- 16 bits no irq, no DMA
+ * -- 16 bits True IDE mode with DMA, but no irq.
+ *
+ * In the last case the DMA engine can generate an interrupt when the
+ * transfer is complete.  For the first two cases only PIO is supported.
+ *
+ */
+
+#define DRV_NAME	"pata_octeon_cf"
+#define DRV_VERSION	"2.1"
+
+
+struct octeon_cf_port {
+	struct workqueue_struct *wq;
+	struct delayed_work delayed_finish;
+	struct ata_port *ap;
+	int dma_finished;
+};
+
+static struct scsi_host_template octeon_cf_sht = {
+	ATA_PIO_SHT(DRV_NAME),
+};
+
+/**
+ * Convert nanosecond based time to setting used in the
+ * boot bus timing register, based on timing multiple
+ */
+static unsigned int ns_to_tim_reg(unsigned int tim_mult, unsigned int nsecs)
+{
+	unsigned int val;
+
+	/*
+	 * Compute # of eclock periods to get desired duration in
+	 * nanoseconds.
+	 */
+	val = DIV_ROUND_UP(nsecs * (octeon_get_clock_rate() / 1000000),
+			  1000 * tim_mult);
+
+	return val;
+}
+
+static void octeon_cf_set_boot_reg_cfg(int cs)
+{
+	union cvmx_mio_boot_reg_cfgx reg_cfg;
+	reg_cfg.u64 = cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(cs));
+	reg_cfg.s.dmack = 0;	/* Don't assert DMACK on access */
+	reg_cfg.s.tim_mult = 2;	/* Timing mutiplier 2x */
+	reg_cfg.s.rd_dly = 0;	/* Sample on falling edge of BOOT_OE */
+	reg_cfg.s.sam = 0;	/* Don't combine write and output enable */
+	reg_cfg.s.we_ext = 0;	/* No write enable extension */
+	reg_cfg.s.oe_ext = 0;	/* No read enable extension */
+	reg_cfg.s.en = 1;	/* Enable this region */
+	reg_cfg.s.orbit = 0;	/* Don't combine with previous region */
+	reg_cfg.s.ale = 0;	/* Don't do address multiplexing */
+	cvmx_write_csr(CVMX_MIO_BOOT_REG_CFGX(cs), reg_cfg.u64);
+}
+
+/**
+ * Called after libata determines the needed PIO mode. This
+ * function programs the Octeon bootbus regions to support the
+ * timing requirements of the PIO mode.
+ *
+ * @ap:     ATA port information
+ * @dev:    ATA device
+ */
+static void octeon_cf_set_piomode(struct ata_port *ap, struct ata_device *dev)
+{
+	struct octeon_cf_data *ocd = ap->dev->platform_data;
+	union cvmx_mio_boot_reg_timx reg_tim;
+	int cs = ocd->base_region;
+	int T;
+	struct ata_timing timing;
+
+	int use_iordy;
+	int trh;
+	int pause;
+	/* These names are timing parameters from the ATA spec */
+	int t1;
+	int t2;
+	int t2i;
+
+	T = (int)(2000000000000LL / octeon_get_clock_rate());
+
+	if (ata_timing_compute(dev, dev->pio_mode, &timing, T, T))
+		BUG();
+
+	t1 = timing.setup;
+	if (t1)
+		t1--;
+	t2 = timing.active;
+	if (t2)
+		t2--;
+	t2i = timing.act8b;
+	if (t2i)
+		t2i--;
+
+	trh = ns_to_tim_reg(2, 20);
+	if (trh)
+		trh--;
+
+	pause = timing.cycle - timing.active - timing.setup - trh;
+	if (pause)
+		pause--;
+
+	octeon_cf_set_boot_reg_cfg(cs);
+	if (ocd->dma_engine >= 0)
+		/* True IDE mode, program both chip selects.  */
+		octeon_cf_set_boot_reg_cfg(cs + 1);
+
+
+	use_iordy = ata_pio_need_iordy(dev);
+
+	reg_tim.u64 = cvmx_read_csr(CVMX_MIO_BOOT_REG_TIMX(cs));
+	/* Disable page mode */
+	reg_tim.s.pagem = 0;
+	/* Enable dynamic timing */
+	reg_tim.s.waitm = use_iordy;
+	/* Pages are disabled */
+	reg_tim.s.pages = 0;
+	/* We don't use multiplexed address mode */
+	reg_tim.s.ale = 0;
+	/* Not used */
+	reg_tim.s.page = 0;
+	/* Time after IORDY to coninue to assert the data */
+	reg_tim.s.wait = 0;
+	/* Time to wait to complete the cycle. */
+	reg_tim.s.pause = pause;
+	/* How long to hold after a write to de-assert CE. */
+	reg_tim.s.wr_hld = trh;
+	/* How long to wait after a read to de-assert CE. */
+	reg_tim.s.rd_hld = trh;
+	/* How long write enable is asserted */
+	reg_tim.s.we = t2;
+	/* How long read enable is asserted */
+	reg_tim.s.oe = t2;
+	/* Time after CE that read/write starts */
+	reg_tim.s.ce = ns_to_tim_reg(2, 5);
+	/* Time before CE that address is valid */
+	reg_tim.s.adr = 0;
+
+	/* Program the bootbus region timing for the data port chip select. */
+	cvmx_write_csr(CVMX_MIO_BOOT_REG_TIMX(cs), reg_tim.u64);
+	if (ocd->dma_engine >= 0)
+		/* True IDE mode, program both chip selects.  */
+		cvmx_write_csr(CVMX_MIO_BOOT_REG_TIMX(cs + 1), reg_tim.u64);
+}
+
+static void octeon_cf_set_dmamode(struct ata_port *ap, struct ata_device *dev)
+{
+	struct octeon_cf_data *ocd = dev->link->ap->dev->platform_data;
+	union cvmx_mio_boot_dma_timx dma_tim;
+	unsigned int oe_a;
+	unsigned int oe_n;
+	unsigned int dma_ackh;
+	unsigned int dma_arq;
+	unsigned int pause;
+	unsigned int T0, Tkr, Td;
+	unsigned int tim_mult;
+
+	const struct ata_timing *timing;
+
+	timing = ata_timing_find_mode(dev->dma_mode);
+	T0	= timing->cycle;
+	Td	= timing->active;
+	Tkr	= timing->recover;
+	dma_ackh = timing->dmack_hold;
+
+	dma_tim.u64 = 0;
+	/* dma_tim.s.tim_mult = 0 --> 4x */
+	tim_mult = 4;
+
+	/* not spec'ed, value in eclocks, not affected by tim_mult */
+	dma_arq = 8;
+	pause = 25 - dma_arq * 1000 /
+		(octeon_get_clock_rate() / 1000000); /* Tz */
+
+	oe_a = Td;
+	/* Tkr from cf spec, lengthened to meet T0 */
+	oe_n = max(T0 - oe_a, Tkr);
+
+	dma_tim.s.dmack_pi = 1;
+
+	dma_tim.s.oe_n = ns_to_tim_reg(tim_mult, oe_n);
+	dma_tim.s.oe_a = ns_to_tim_reg(tim_mult, oe_a);
+
+	/*
+	 * This is tI, C.F. spec. says 0, but Sony CF card requires
+	 * more, we use 20 nS.
+	 */
+	dma_tim.s.dmack_s = ns_to_tim_reg(tim_mult, 20);;
+	dma_tim.s.dmack_h = ns_to_tim_reg(tim_mult, dma_ackh);
+
+	dma_tim.s.dmarq = dma_arq;
+	dma_tim.s.pause = ns_to_tim_reg(tim_mult, pause);
+
+	dma_tim.s.rd_dly = 0;	/* Sample right on edge */
+
+	/*  writes only */
+	dma_tim.s.we_n = ns_to_tim_reg(tim_mult, oe_n);
+	dma_tim.s.we_a = ns_to_tim_reg(tim_mult, oe_a);
+
+	pr_debug("ns to ticks (mult %d) of %d is: %d\n", tim_mult, 60,
+		 ns_to_tim_reg(tim_mult, 60));
+	pr_debug("oe_n: %d, oe_a: %d, dmack_s: %d, dmack_h: "
+		 "%d, dmarq: %d, pause: %d\n",
+		 dma_tim.s.oe_n, dma_tim.s.oe_a, dma_tim.s.dmack_s,
+		 dma_tim.s.dmack_h, dma_tim.s.dmarq, dma_tim.s.pause);
+
+	cvmx_write_csr(CVMX_MIO_BOOT_DMA_TIMX(ocd->dma_engine),
+		       dma_tim.u64);
+
+}
+
+/**
+ * Handle an 8 bit I/O request.
+ *
+ * @dev:        Device to access
+ * @buffer:     Data buffer
+ * @buflen:     Length of the buffer.
+ * @rw:         True to write.
+ */
+static unsigned int octeon_cf_data_xfer8(struct ata_device *dev,
+					 unsigned char *buffer,
+					 unsigned int buflen,
+					 int rw)
+{
+	struct ata_port *ap		= dev->link->ap;
+	void __iomem *data_addr		= ap->ioaddr.data_addr;
+	unsigned long words;
+	int count;
+
+	words = buflen;
+	if (rw) {
+		count = 16;
+		while (words--) {
+			iowrite8(*buffer, data_addr);
+			buffer++;
+			/*
+			 * Every 16 writes do a read so the bootbus
+			 * FIFO doesn't fill up.
+			 */
+			if (--count == 0) {
+				ioread8(ap->ioaddr.altstatus_addr);
+				count = 16;
+			}
+		}
+	} else {
+		ioread8_rep(data_addr, buffer, words);
+	}
+	return buflen;
+}
+
+/**
+ * Handle a 16 bit I/O request.
+ *
+ * @dev:        Device to access
+ * @buffer:     Data buffer
+ * @buflen:     Length of the buffer.
+ * @rw:         True to write.
+ */
+static unsigned int octeon_cf_data_xfer16(struct ata_device *dev,
+					  unsigned char *buffer,
+					  unsigned int buflen,
+					  int rw)
+{
+	struct ata_port *ap		= dev->link->ap;
+	void __iomem *data_addr		= ap->ioaddr.data_addr;
+	unsigned long words;
+	int count;
+
+	words = buflen / 2;
+	if (rw) {
+		count = 16;
+		while (words--) {
+			iowrite16(*(uint16_t *)buffer, data_addr);
+			buffer += sizeof(uint16_t);
+			/*
+			 * Every 16 writes do a read so the bootbus
+			 * FIFO doesn't fill up.
+			 */
+			if (--count == 0) {
+				ioread8(ap->ioaddr.altstatus_addr);
+				count = 16;
+			}
+		}
+	} else {
+		while (words--) {
+			*(uint16_t *)buffer = ioread16(data_addr);
+			buffer += sizeof(uint16_t);
+		}
+	}
+	/* Transfer trailing 1 byte, if any. */
+	if (unlikely(buflen & 0x01)) {
+		__le16 align_buf[1] = { 0 };
+
+		if (rw == READ) {
+			align_buf[0] = cpu_to_le16(ioread16(data_addr));
+			memcpy(buffer, align_buf, 1);
+		} else {
+			memcpy(align_buf, buffer, 1);
+			iowrite16(le16_to_cpu(align_buf[0]), data_addr);
+		}
+		words++;
+	}
+	return buflen;
+}
+
+/**
+ * Read the taskfile for 16bit non-True IDE only.
+ */
+static void octeon_cf_tf_read16(struct ata_port *ap, struct ata_taskfile *tf)
+{
+	u16 blob;
+	/* The base of the registers is at ioaddr.data_addr. */
+	void __iomem *base = ap->ioaddr.data_addr;
+
+	blob = __raw_readw(base + 0xc);
+	tf->feature = blob >> 8;
+
+	blob = __raw_readw(base + 2);
+	tf->nsect = blob & 0xff;
+	tf->lbal = blob >> 8;
+
+	blob = __raw_readw(base + 4);
+	tf->lbam = blob & 0xff;
+	tf->lbah = blob >> 8;
+
+	blob = __raw_readw(base + 6);
+	tf->device = blob & 0xff;
+	tf->command = blob >> 8;
+
+	if (tf->flags & ATA_TFLAG_LBA48) {
+		if (likely(ap->ioaddr.ctl_addr)) {
+			iowrite8(tf->ctl | ATA_HOB, ap->ioaddr.ctl_addr);
+
+			blob = __raw_readw(base + 0xc);
+			tf->hob_feature = blob >> 8;
+
+			blob = __raw_readw(base + 2);
+			tf->hob_nsect = blob & 0xff;
+			tf->hob_lbal = blob >> 8;
+
+			blob = __raw_readw(base + 4);
+			tf->hob_lbam = blob & 0xff;
+			tf->hob_lbah = blob >> 8;
+
+			iowrite8(tf->ctl, ap->ioaddr.ctl_addr);
+			ap->last_ctl = tf->ctl;
+		} else {
+			WARN_ON(1);
+		}
+	}
+}
+
+static u8 octeon_cf_check_status16(struct ata_port *ap)
+{
+	u16 blob;
+	void __iomem *base = ap->ioaddr.data_addr;
+
+	blob = __raw_readw(base + 6);
+	return blob >> 8;
+}
+
+static int octeon_cf_softreset16(struct ata_link *link, unsigned int *classes,
+				 unsigned long deadline)
+{
+	struct ata_port *ap = link->ap;
+	void __iomem *base = ap->ioaddr.data_addr;
+	int rc;
+	u8 err;
+
+	DPRINTK("about to softreset\n");
+	__raw_writew(ap->ctl, base + 0xe);
+	udelay(20);
+	__raw_writew(ap->ctl | ATA_SRST, base + 0xe);
+	udelay(20);
+	__raw_writew(ap->ctl, base + 0xe);
+
+	rc = ata_sff_wait_after_reset(link, 1, deadline);
+	if (rc) {
+		ata_link_printk(link, KERN_ERR, "SRST failed (errno=%d)\n", rc);
+		return rc;
+	}
+
+	/* determine by signature whether we have ATA or ATAPI devices */
+	classes[0] = ata_sff_dev_classify(&link->device[0], 1, &err);
+	DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]);
+	return 0;
+}
+
+/**
+ * Load the taskfile for 16bit non-True IDE only.  The device_addr is
+ * not loaded, we do this as part of octeon_cf_exec_command16.
+ */
+static void octeon_cf_tf_load16(struct ata_port *ap,
+				const struct ata_taskfile *tf)
+{
+	unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
+	/* The base of the registers is at ioaddr.data_addr. */
+	void __iomem *base = ap->ioaddr.data_addr;
+
+	if (tf->ctl != ap->last_ctl) {
+		iowrite8(tf->ctl, ap->ioaddr.ctl_addr);
+		ap->last_ctl = tf->ctl;
+		ata_wait_idle(ap);
+	}
+	if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
+		__raw_writew(tf->hob_feature << 8, base + 0xc);
+		__raw_writew(tf->hob_nsect | tf->hob_lbal << 8, base + 2);
+		__raw_writew(tf->hob_lbam | tf->hob_lbah << 8, base + 4);
+		VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
+			tf->hob_feature,
+			tf->hob_nsect,
+			tf->hob_lbal,
+			tf->hob_lbam,
+			tf->hob_lbah);
+	}
+	if (is_addr) {
+		__raw_writew(tf->feature << 8, base + 0xc);
+		__raw_writew(tf->nsect | tf->lbal << 8, base + 2);
+		__raw_writew(tf->lbam | tf->lbah << 8, base + 4);
+		VPRINTK("feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
+			tf->feature,
+			tf->nsect,
+			tf->lbal,
+			tf->lbam,
+			tf->lbah);
+	}
+	ata_wait_idle(ap);
+}
+
+
+static void octeon_cf_dev_select(struct ata_port *ap, unsigned int device)
+{
+/*  There is only one device, do nothing. */
+	return;
+}
+
+/*
+ * Issue ATA command to host controller.  The device_addr is also sent
+ * as it must be written in a combined write with the command.
+ */
+static void octeon_cf_exec_command16(struct ata_port *ap,
+				const struct ata_taskfile *tf)
+{
+	/* The base of the registers is at ioaddr.data_addr. */
+	void __iomem *base = ap->ioaddr.data_addr;
+	u16 blob;
+
+	if (tf->flags & ATA_TFLAG_DEVICE) {
+		VPRINTK("device 0x%X\n", tf->device);
+		blob = tf->device;
+	} else {
+		blob = 0;
+	}
+
+	DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
+	blob |= (tf->command << 8);
+	__raw_writew(blob, base + 6);
+
+
+	ata_wait_idle(ap);
+}
+
+static u8 octeon_cf_irq_on(struct ata_port *ap)
+{
+	return 0;
+}
+
+static void octeon_cf_irq_clear(struct ata_port *ap)
+{
+	return;
+}
+
+static void octeon_cf_dma_setup(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	struct octeon_cf_port *cf_port;
+
+	cf_port = (struct octeon_cf_port *)ap->private_data;
+	DPRINTK("ENTER\n");
+	/* issue r/w command */
+	qc->cursg = qc->sg;
+	cf_port->dma_finished = 0;
+	ap->ops->sff_exec_command(ap, &qc->tf);
+	DPRINTK("EXIT\n");
+}
+
+/**
+ * Start a DMA transfer that was already setup
+ *
+ * @qc:     Information about the DMA
+ */
+static void octeon_cf_dma_start(struct ata_queued_cmd *qc)
+{
+	struct octeon_cf_data *ocd = qc->ap->dev->platform_data;
+	union cvmx_mio_boot_dma_cfgx mio_boot_dma_cfg;
+	union cvmx_mio_boot_dma_intx mio_boot_dma_int;
+	struct scatterlist *sg;
+
+	VPRINTK("%d scatterlists\n", qc->n_elem);
+
+	/* Get the scatter list entry we need to DMA into */
+	sg = qc->cursg;
+	BUG_ON(!sg);
+
+	/*
+	 * Clear the DMA complete status.
+	 */
+	mio_boot_dma_int.u64 = 0;
+	mio_boot_dma_int.s.done = 1;
+	cvmx_write_csr(CVMX_MIO_BOOT_DMA_INTX(ocd->dma_engine),
+		       mio_boot_dma_int.u64);
+
+	/* Enable the interrupt.  */
+	cvmx_write_csr(CVMX_MIO_BOOT_DMA_INT_ENX(ocd->dma_engine),
+		       mio_boot_dma_int.u64);
+
+	/* Set the direction of the DMA */
+	mio_boot_dma_cfg.u64 = 0;
+	mio_boot_dma_cfg.s.en = 1;
+	mio_boot_dma_cfg.s.rw = ((qc->tf.flags & ATA_TFLAG_WRITE) != 0);
+
+	/*
+	 * Don't stop the DMA if the device deasserts DMARQ. Many
+	 * compact flashes deassert DMARQ for a short time between
+	 * sectors. Instead of stopping and restarting the DMA, we'll
+	 * let the hardware do it. If the DMA is really stopped early
+	 * due to an error condition, a later timeout will force us to
+	 * stop.
+	 */
+	mio_boot_dma_cfg.s.clr = 0;
+
+	/* Size is specified in 16bit words and minus one notation */
+	mio_boot_dma_cfg.s.size = sg_dma_len(sg) / 2 - 1;
+
+	/* We need to swap the high and low bytes of every 16 bits */
+	mio_boot_dma_cfg.s.swap8 = 1;
+
+	mio_boot_dma_cfg.s.adr = sg_dma_address(sg);
+
+	VPRINTK("%s %d bytes address=%p\n",
+		(mio_boot_dma_cfg.s.rw) ? "write" : "read", sg->length,
+		(void *)(unsigned long)mio_boot_dma_cfg.s.adr);
+
+	cvmx_write_csr(CVMX_MIO_BOOT_DMA_CFGX(ocd->dma_engine),
+		       mio_boot_dma_cfg.u64);
+}
+
+/**
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ *
+ */
+static unsigned int octeon_cf_dma_finished(struct ata_port *ap,
+					struct ata_queued_cmd *qc)
+{
+	struct ata_eh_info *ehi = &ap->link.eh_info;
+	struct octeon_cf_data *ocd = ap->dev->platform_data;
+	union cvmx_mio_boot_dma_cfgx dma_cfg;
+	union cvmx_mio_boot_dma_intx dma_int;
+	struct octeon_cf_port *cf_port;
+	u8 status;
+
+	VPRINTK("ata%u: protocol %d task_state %d\n",
+		ap->print_id, qc->tf.protocol, ap->hsm_task_state);
+
+
+	if (ap->hsm_task_state != HSM_ST_LAST)
+		return 0;
+
+	cf_port = (struct octeon_cf_port *)ap->private_data;
+
+	dma_cfg.u64 = cvmx_read_csr(CVMX_MIO_BOOT_DMA_CFGX(ocd->dma_engine));
+	if (dma_cfg.s.size != 0xfffff) {
+		/* Error, the transfer was not complete.  */
+		qc->err_mask |= AC_ERR_HOST_BUS;
+		ap->hsm_task_state = HSM_ST_ERR;
+	}
+
+	/* Stop and clear the dma engine.  */
+	dma_cfg.u64 = 0;
+	dma_cfg.s.size = -1;
+	cvmx_write_csr(CVMX_MIO_BOOT_DMA_CFGX(ocd->dma_engine), dma_cfg.u64);
+
+	/* Disable the interrupt.  */
+	dma_int.u64 = 0;
+	cvmx_write_csr(CVMX_MIO_BOOT_DMA_INT_ENX(ocd->dma_engine), dma_int.u64);
+
+	/* Clear the DMA complete status */
+	dma_int.s.done = 1;
+	cvmx_write_csr(CVMX_MIO_BOOT_DMA_INTX(ocd->dma_engine), dma_int.u64);
+
+	status = ap->ops->sff_check_status(ap);
+
+	ata_sff_hsm_move(ap, qc, status, 0);
+
+	if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA))
+		ata_ehi_push_desc(ehi, "DMA stat 0x%x", status);
+
+	return 1;
+}
+
+/*
+ * Check if any queued commands have more DMAs, if so start the next
+ * transfer, else do end of transfer handling.
+ */
+static irqreturn_t octeon_cf_interrupt(int irq, void *dev_instance)
+{
+	struct ata_host *host = dev_instance;
+	struct octeon_cf_port *cf_port;
+	int i;
+	unsigned int handled = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	DPRINTK("ENTER\n");
+	for (i = 0; i < host->n_ports; i++) {
+		u8 status;
+		struct ata_port *ap;
+		struct ata_queued_cmd *qc;
+		union cvmx_mio_boot_dma_intx dma_int;
+		union cvmx_mio_boot_dma_cfgx dma_cfg;
+		struct octeon_cf_data *ocd;
+
+		ap = host->ports[i];
+		ocd = ap->dev->platform_data;
+		if (!ap || (ap->flags & ATA_FLAG_DISABLED))
+			continue;
+
+		ocd = ap->dev->platform_data;
+		cf_port = (struct octeon_cf_port *)ap->private_data;
+		dma_int.u64 =
+			cvmx_read_csr(CVMX_MIO_BOOT_DMA_INTX(ocd->dma_engine));
+		dma_cfg.u64 =
+			cvmx_read_csr(CVMX_MIO_BOOT_DMA_CFGX(ocd->dma_engine));
+
+		qc = ata_qc_from_tag(ap, ap->link.active_tag);
+
+		if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) &&
+		    (qc->flags & ATA_QCFLAG_ACTIVE)) {
+			if (dma_int.s.done && !dma_cfg.s.en) {
+				if (!sg_is_last(qc->cursg)) {
+					qc->cursg = sg_next(qc->cursg);
+					handled = 1;
+					octeon_cf_dma_start(qc);
+					continue;
+				} else {
+					cf_port->dma_finished = 1;
+				}
+			}
+			if (!cf_port->dma_finished)
+				continue;
+			status = ioread8(ap->ioaddr.altstatus_addr);
+			if (status & (ATA_BUSY | ATA_DRQ)) {
+				/*
+				 * We are busy, try to handle it
+				 * later.  This is the DMA finished
+				 * interrupt, and it could take a
+				 * little while for the card to be
+				 * ready for more commands.
+				 */
+				/* Clear DMA irq. */
+				dma_int.u64 = 0;
+				dma_int.s.done = 1;
+				cvmx_write_csr(CVMX_MIO_BOOT_DMA_INTX(ocd->dma_engine),
+					       dma_int.u64);
+
+				queue_delayed_work(cf_port->wq,
+						   &cf_port->delayed_finish, 1);
+				handled = 1;
+			} else {
+				handled |= octeon_cf_dma_finished(ap, qc);
+			}
+		}
+	}
+	spin_unlock_irqrestore(&host->lock, flags);
+	DPRINTK("EXIT\n");
+	return IRQ_RETVAL(handled);
+}
+
+static void octeon_cf_delayed_finish(struct work_struct *work)
+{
+	struct octeon_cf_port *cf_port = container_of(work,
+						      struct octeon_cf_port,
+						      delayed_finish.work);
+	struct ata_port *ap = cf_port->ap;
+	struct ata_host *host = ap->host;
+	struct ata_queued_cmd *qc;
+	unsigned long flags;
+	u8 status;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	/*
+	 * If the port is not waiting for completion, it must have
+	 * handled it previously.  The hsm_task_state is
+	 * protected by host->lock.
+	 */
+	if (ap->hsm_task_state != HSM_ST_LAST || !cf_port->dma_finished)
+		goto out;
+
+	status = ioread8(ap->ioaddr.altstatus_addr);
+	if (status & (ATA_BUSY | ATA_DRQ)) {
+		/* Still busy, try again. */
+		queue_delayed_work(cf_port->wq,
+				   &cf_port->delayed_finish, 1);
+		goto out;
+	}
+	qc = ata_qc_from_tag(ap, ap->link.active_tag);
+	if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) &&
+	    (qc->flags & ATA_QCFLAG_ACTIVE))
+		octeon_cf_dma_finished(ap, qc);
+out:
+	spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static void octeon_cf_dev_config(struct ata_device *dev)
+{
+	/*
+	 * A maximum of 2^20 - 1 16 bit transfers are possible with
+	 * the bootbus DMA.  So we need to throttle max_sectors to
+	 * (2^12 - 1 == 4095) to assure that this can never happen.
+	 */
+	dev->max_sectors = min(dev->max_sectors, 4095U);
+}
+
+/*
+ * Trap if driver tries to do standard bmdma commands.  They are not
+ * supported.
+ */
+static void unreachable_qc(struct ata_queued_cmd *qc)
+{
+	BUG();
+}
+
+static u8 unreachable_port(struct ata_port *ap)
+{
+	BUG();
+}
+
+/*
+ * We don't do ATAPI DMA so return 0.
+ */
+static int octeon_cf_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+	return 0;
+}
+
+static unsigned int octeon_cf_qc_issue(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+
+	switch (qc->tf.protocol) {
+	case ATA_PROT_DMA:
+		WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING);
+
+		ap->ops->sff_tf_load(ap, &qc->tf);  /* load tf registers */
+		octeon_cf_dma_setup(qc);	    /* set up dma */
+		octeon_cf_dma_start(qc);	    /* initiate dma */
+		ap->hsm_task_state = HSM_ST_LAST;
+		break;
+
+	case ATAPI_PROT_DMA:
+		dev_err(ap->dev, "Error, ATAPI not supported\n");
+		BUG();
+
+	default:
+		return ata_sff_qc_issue(qc);
+	}
+
+	return 0;
+}
+
+static struct ata_port_operations octeon_cf_ops = {
+	.inherits		= &ata_sff_port_ops,
+	.check_atapi_dma	= octeon_cf_check_atapi_dma,
+	.qc_prep		= ata_noop_qc_prep,
+	.qc_issue		= octeon_cf_qc_issue,
+	.sff_dev_select		= octeon_cf_dev_select,
+	.sff_irq_on		= octeon_cf_irq_on,
+	.sff_irq_clear		= octeon_cf_irq_clear,
+	.bmdma_setup		= unreachable_qc,
+	.bmdma_start		= unreachable_qc,
+	.bmdma_stop		= unreachable_qc,
+	.bmdma_status		= unreachable_port,
+	.cable_detect		= ata_cable_40wire,
+	.set_piomode		= octeon_cf_set_piomode,
+	.set_dmamode		= octeon_cf_set_dmamode,
+	.dev_config		= octeon_cf_dev_config,
+};
+
+static int __devinit octeon_cf_probe(struct platform_device *pdev)
+{
+	struct resource *res_cs0, *res_cs1;
+
+	void __iomem *cs0;
+	void __iomem *cs1 = NULL;
+	struct ata_host *host;
+	struct ata_port *ap;
+	struct octeon_cf_data *ocd;
+	int irq = 0;
+	irq_handler_t irq_handler = NULL;
+	void __iomem *base;
+	struct octeon_cf_port *cf_port;
+
+	res_cs0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	if (!res_cs0)
+		return -EINVAL;
+
+	ocd = pdev->dev.platform_data;
+
+	cs0 = devm_ioremap_nocache(&pdev->dev, res_cs0->start,
+				   res_cs0->end - res_cs0->start + 1);
+
+	if (!cs0)
+		return -ENOMEM;
+
+	/* Determine from availability of DMA if True IDE mode or not */
+	if (ocd->dma_engine >= 0) {
+		res_cs1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+		if (!res_cs1)
+			return -EINVAL;
+
+		cs1 = devm_ioremap_nocache(&pdev->dev, res_cs1->start,
+					   res_cs0->end - res_cs1->start + 1);
+
+		if (!cs1)
+			return -ENOMEM;
+	}
+
+	cf_port = kzalloc(sizeof(*cf_port), GFP_KERNEL);
+	if (!cf_port)
+		return -ENOMEM;
+
+	/* allocate host */
+	host = ata_host_alloc(&pdev->dev, 1);
+	if (!host)
+		goto free_cf_port;
+
+	ap = host->ports[0];
+	ap->private_data = cf_port;
+	cf_port->ap = ap;
+	ap->ops = &octeon_cf_ops;
+	ap->pio_mask = 0x7f; /* Support PIO 0-6 */
+	ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY
+		  | ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING;
+
+	base = cs0 + ocd->base_region_bias;
+	if (!ocd->is16bit) {
+		ap->ioaddr.cmd_addr	= base;
+		ata_sff_std_ports(&ap->ioaddr);
+
+		ap->ioaddr.altstatus_addr = base + 0xe;
+		ap->ioaddr.ctl_addr	= base + 0xe;
+		octeon_cf_ops.sff_data_xfer = octeon_cf_data_xfer8;
+	} else if (cs1) {
+		/* Presence of cs1 indicates True IDE mode.  */
+		ap->ioaddr.cmd_addr	= base + (ATA_REG_CMD << 1) + 1;
+		ap->ioaddr.data_addr	= base + (ATA_REG_DATA << 1);
+		ap->ioaddr.error_addr	= base + (ATA_REG_ERR << 1) + 1;
+		ap->ioaddr.feature_addr	= base + (ATA_REG_FEATURE << 1) + 1;
+		ap->ioaddr.nsect_addr	= base + (ATA_REG_NSECT << 1) + 1;
+		ap->ioaddr.lbal_addr	= base + (ATA_REG_LBAL << 1) + 1;
+		ap->ioaddr.lbam_addr	= base + (ATA_REG_LBAM << 1) + 1;
+		ap->ioaddr.lbah_addr	= base + (ATA_REG_LBAH << 1) + 1;
+		ap->ioaddr.device_addr	= base + (ATA_REG_DEVICE << 1) + 1;
+		ap->ioaddr.status_addr	= base + (ATA_REG_STATUS << 1) + 1;
+		ap->ioaddr.command_addr	= base + (ATA_REG_CMD << 1) + 1;
+		ap->ioaddr.altstatus_addr = cs1 + (6 << 1) + 1;
+		ap->ioaddr.ctl_addr	= cs1 + (6 << 1) + 1;
+		octeon_cf_ops.sff_data_xfer = octeon_cf_data_xfer16;
+
+		ap->mwdma_mask	= 0x1f; /* Support MWDMA 0-4 */
+		irq = platform_get_irq(pdev, 0);
+		irq_handler = octeon_cf_interrupt;
+
+		/* True IDE mode needs delayed work to poll for not-busy.  */
+		cf_port->wq = create_singlethread_workqueue(DRV_NAME);
+		if (!cf_port->wq)
+			goto free_cf_port;
+		INIT_DELAYED_WORK(&cf_port->delayed_finish,
+				  octeon_cf_delayed_finish);
+
+	} else {
+		/* 16 bit but not True IDE */
+		octeon_cf_ops.sff_data_xfer	= octeon_cf_data_xfer16;
+		octeon_cf_ops.softreset		= octeon_cf_softreset16;
+		octeon_cf_ops.sff_check_status	= octeon_cf_check_status16;
+		octeon_cf_ops.sff_tf_read	= octeon_cf_tf_read16;
+		octeon_cf_ops.sff_tf_load	= octeon_cf_tf_load16;
+		octeon_cf_ops.sff_exec_command	= octeon_cf_exec_command16;
+
+		ap->ioaddr.data_addr	= base + ATA_REG_DATA;
+		ap->ioaddr.nsect_addr	= base + ATA_REG_NSECT;
+		ap->ioaddr.lbal_addr	= base + ATA_REG_LBAL;
+		ap->ioaddr.ctl_addr	= base + 0xe;
+		ap->ioaddr.altstatus_addr = base + 0xe;
+	}
+
+	ata_port_desc(ap, "cmd %p ctl %p", base, ap->ioaddr.ctl_addr);
+
+
+	dev_info(&pdev->dev, "version " DRV_VERSION" %d bit%s.\n",
+		 (ocd->is16bit) ? 16 : 8,
+		 (cs1) ? ", True IDE" : "");
+
+
+	return ata_host_activate(host, irq, irq_handler, 0, &octeon_cf_sht);
+
+free_cf_port:
+	kfree(cf_port);
+	return -ENOMEM;
+}
+
+static struct platform_driver octeon_cf_driver = {
+	.probe		= octeon_cf_probe,
+	.driver		= {
+		.name	= DRV_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init octeon_cf_init(void)
+{
+	return platform_driver_register(&octeon_cf_driver);
+}
+
+
+MODULE_AUTHOR("David Daney <ddaney@caviumnetworks.com>");
+MODULE_DESCRIPTION("low-level driver for Cavium OCTEON Compact Flash PATA");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("platform:" DRV_NAME);
+
+module_init(octeon_cf_init);
diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
index c2e6fb9..ebfcda2 100644
--- a/drivers/ata/pata_rb532_cf.c
+++ b/drivers/ata/pata_rb532_cf.c
@@ -63,8 +63,6 @@
 	   ata_sff_sync might be sufficient. */
 	ata_sff_dma_pause(ap);
 	ndelay(RB500_CF_IO_DELAY);
-
-	set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
 }
 
 static void rb532_pata_exec_command(struct ata_port *ap,
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 681169c..79a6c9a0 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -86,6 +86,10 @@
 	VIA_SATA_PATA	= 0x800, /* SATA/PATA combined configuration */
 };
 
+enum {
+	VIA_IDFLAG_SINGLE = (1 << 0), /* single channel controller) */
+};
+
 /*
  * VIA SouthBridge chips.
  */
@@ -97,8 +101,12 @@
 	u8 rev_max;
 	u16 flags;
 } via_isa_bridges[] = {
+	{ "vx855",	PCI_DEVICE_ID_VIA_VX855,    0x00, 0x2f,
+	  VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA },
 	{ "vx800",	PCI_DEVICE_ID_VIA_VX800,    0x00, 0x2f, VIA_UDMA_133 |
 	VIA_BAD_AST | VIA_SATA_PATA },
+	{ "vt8261",	PCI_DEVICE_ID_VIA_8261,     0x00, 0x2f,
+	  VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt8237s",	PCI_DEVICE_ID_VIA_8237S,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt8251",	PCI_DEVICE_ID_VIA_8251,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "cx700",	PCI_DEVICE_ID_VIA_CX700,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA },
@@ -122,6 +130,8 @@
 	{ "vt82c586",	PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, VIA_UDMA_NONE | VIA_SET_FIFO },
 	{ "vt82c576",	PCI_DEVICE_ID_VIA_82C576,   0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK },
 	{ "vt82c576",	PCI_DEVICE_ID_VIA_82C576,   0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID },
+	{ "vtxxxx",	PCI_DEVICE_ID_VIA_ANON,    0x00, 0x2f,
+	  VIA_UDMA_133 | VIA_BAD_AST },
 	{ NULL }
 };
 
@@ -460,6 +470,7 @@
 	static int printed_version;
 	u8 enable;
 	u32 timing;
+	unsigned long flags = id->driver_data;
 	int rc;
 
 	if (!printed_version++)
@@ -469,9 +480,13 @@
 	if (rc)
 		return rc;
 
+	if (flags & VIA_IDFLAG_SINGLE)
+		ppi[1] = &ata_dummy_port_info;
+
 	/* To find out how the IDE will behave and what features we
 	   actually have to look at the bridge not the IDE controller */
-	for (config = via_isa_bridges; config->id; config++)
+	for (config = via_isa_bridges; config->id != PCI_DEVICE_ID_VIA_ANON;
+	     config++)
 		if ((isa = pci_get_device(PCI_VENDOR_ID_VIA +
 			!!(config->flags & VIA_BAD_ID),
 			config->id, NULL))) {
@@ -482,10 +497,6 @@
 			pci_dev_put(isa);
 		}
 
-	if (!config->id) {
-		printk(KERN_WARNING "via: Unknown VIA SouthBridge, disabling.\n");
-		return -ENODEV;
-	}
 	pci_dev_put(isa);
 
 	if (!(config->flags & VIA_NO_ENABLES)) {
@@ -587,6 +598,7 @@
 	{ PCI_VDEVICE(VIA, 0x1571), },
 	{ PCI_VDEVICE(VIA, 0x3164), },
 	{ PCI_VDEVICE(VIA, 0x5324), },
+	{ PCI_VDEVICE(VIA, 0xC409), VIA_IDFLAG_SINGLE },
 
 	{ },
 };
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 1a56db9..55bc88c 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -1288,7 +1288,7 @@
 static int sata_fsl_probe(struct of_device *ofdev,
 			const struct of_device_id *match)
 {
-	int retval = 0;
+	int retval = -ENXIO;
 	void __iomem *hcr_base = NULL;
 	void __iomem *ssr_base = NULL;
 	void __iomem *csr_base = NULL;
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 86918634..f2d8a020 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -33,10 +33,6 @@
  *
  * --> ATAPI support (Marvell claims the 60xx/70xx chips can do it).
  *
- * --> Investigate problems with PCI Message Signalled Interrupts (MSI).
- *
- * --> Cache frequently-accessed registers in mv_port_priv to reduce overhead.
- *
  * --> Develop a low-power-consumption strategy, and implement it.
  *
  * --> [Experiment, low priority] Investigate interrupt coalescing.
@@ -72,7 +68,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_mv"
-#define DRV_VERSION	"1.24"
+#define DRV_VERSION	"1.25"
 
 enum {
 	/* BAR's are enumerated in terms of pci_resource_start() terms */
@@ -351,8 +347,6 @@
 
 	EDMA_HALTCOND_OFS	= 0x60,		/* GenIIe halt conditions */
 
-	GEN_II_NCQ_MAX_SECTORS	= 256,		/* max sects/io on Gen2 w/NCQ */
-
 	/* Host private flags (hp_flags) */
 	MV_HP_FLAG_MSI		= (1 << 0),
 	MV_HP_ERRATA_50XXB0	= (1 << 1),
@@ -883,19 +877,15 @@
 		struct mv_host_priv *hpriv = ap->host->private_data;
 		int hardport = mv_hardport_from_port(ap->port_no);
 		void __iomem *hc_mmio = mv_hc_base_from_port(
-					mv_host_base(ap->host), hardport);
-		u32 hc_irq_cause, ipending;
+					mv_host_base(ap->host), ap->port_no);
+		u32 hc_irq_cause;
 
 		/* clear EDMA event indicators, if any */
 		writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
 
-		/* clear EDMA interrupt indicator, if any */
-		hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
-		ipending = (DEV_IRQ | DMA_IRQ) << hardport;
-		if (hc_irq_cause & ipending) {
-			writelfl(hc_irq_cause & ~ipending,
-				 hc_mmio + HC_IRQ_CAUSE_OFS);
-		}
+		/* clear pending irq events */
+		hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport);
+		writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
 
 		mv_edma_cfg(ap, want_ncq);
 
@@ -1099,20 +1089,12 @@
 	 *
 	 * Gen-II does not support NCQ over a port multiplier
 	 *  (no FIS-based switching).
-	 *
-	 * We don't have hob_nsect when doing NCQ commands on Gen-II.
-	 * See mv_qc_prep() for more info.
 	 */
 	if (adev->flags & ATA_DFLAG_NCQ) {
 		if (sata_pmp_attached(adev->link->ap)) {
 			adev->flags &= ~ATA_DFLAG_NCQ;
 			ata_dev_printk(adev, KERN_INFO,
 				"NCQ disabled for command-based switching\n");
-		} else if (adev->max_sectors > GEN_II_NCQ_MAX_SECTORS) {
-			adev->max_sectors = GEN_II_NCQ_MAX_SECTORS;
-			ata_dev_printk(adev, KERN_INFO,
-				"max_sectors limited to %u for NCQ\n",
-				adev->max_sectors);
 		}
 	}
 }
@@ -1450,7 +1432,8 @@
 	 * only 11 bytes...so we must pick and choose required
 	 * registers based on the command.  So, we drop feature and
 	 * hob_feature for [RW] DMA commands, but they are needed for
-	 * NCQ.  NCQ will drop hob_nsect.
+	 * NCQ.  NCQ will drop hob_nsect, which is not needed there
+	 * (nsect is used only for the tag; feat/hob_feat hold true nsect).
 	 */
 	switch (tf->command) {
 	case ATA_CMD_READ:
@@ -2214,9 +2197,15 @@
 	struct ata_host *host = dev_instance;
 	struct mv_host_priv *hpriv = host->private_data;
 	unsigned int handled = 0;
+	int using_msi = hpriv->hp_flags & MV_HP_FLAG_MSI;
 	u32 main_irq_cause, pending_irqs;
 
 	spin_lock(&host->lock);
+
+	/* for MSI:  block new interrupts while in here */
+	if (using_msi)
+		writel(0, hpriv->main_irq_mask_addr);
+
 	main_irq_cause = readl(hpriv->main_irq_cause_addr);
 	pending_irqs   = main_irq_cause & hpriv->main_irq_mask;
 	/*
@@ -2230,6 +2219,11 @@
 			handled = mv_host_intr(host, pending_irqs);
 	}
 	spin_unlock(&host->lock);
+
+	/* for MSI: unmask; interrupt cause bits will retrigger now */
+	if (using_msi)
+		writel(hpriv->main_irq_mask, hpriv->main_irq_mask_addr);
+
 	return IRQ_RETVAL(handled);
 }
 
@@ -2821,8 +2815,7 @@
 	writel(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
 
 	/* clear pending irq events */
-	hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
-	hc_irq_cause &= ~((DEV_IRQ | DMA_IRQ) << hardport);
+	hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport);
 	writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
 
 	mv_enable_port_irqs(ap, ERR_IRQ);
@@ -3075,6 +3068,9 @@
 		hpriv->main_irq_mask_addr  = mmio + PCI_HC_MAIN_IRQ_MASK_OFS;
 	}
 
+	/* initialize shadow irq mask with register's value */
+	hpriv->main_irq_mask = readl(hpriv->main_irq_mask_addr);
+
 	/* global interrupt mask: 0 == mask everything */
 	mv_set_main_irq_mask(host, ~0, 0);
 
@@ -3430,9 +3426,9 @@
 	if (rc)
 		return rc;
 
-	/* Enable interrupts */
-	if (msi && pci_enable_msi(pdev))
-		pci_intx(pdev, 1);
+	/* Enable message-switched interrupts, if requested */
+	if (msi && pci_enable_msi(pdev) == 0)
+		hpriv->hp_flags |= MV_HP_FLAG_MSI;
 
 	mv_dump_pci_cfg(pdev, 0x68);
 	mv_print_info(host);
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 6f146061..c49ad0e 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -305,10 +305,10 @@
 static int nv_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
 static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
 
+static int nv_noclassify_hardreset(struct ata_link *link, unsigned int *class,
+				   unsigned long deadline);
 static void nv_nf2_freeze(struct ata_port *ap);
 static void nv_nf2_thaw(struct ata_port *ap);
-static int nv_nf2_hardreset(struct ata_link *link, unsigned int *class,
-			    unsigned long deadline);
 static void nv_ck804_freeze(struct ata_port *ap);
 static void nv_ck804_thaw(struct ata_port *ap);
 static int nv_adma_slave_config(struct scsi_device *sdev);
@@ -352,6 +352,7 @@
 	NFORCE3 = NFORCE2,	/* NF2 == NF3 as far as sata_nv is concerned */
 	CK804,
 	ADMA,
+	MCP5x,
 	SWNCQ,
 };
 
@@ -363,10 +364,10 @@
 	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2), CK804 },
 	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA), CK804 },
 	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2), CK804 },
-	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA), SWNCQ },
-	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2), SWNCQ },
-	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA), SWNCQ },
-	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2), SWNCQ },
+	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA), MCP5x },
+	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2), MCP5x },
+	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA), MCP5x },
+	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2), MCP5x },
 	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA), GENERIC },
 	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2), GENERIC },
 	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3), GENERIC },
@@ -432,7 +433,7 @@
 	.inherits		= &nv_common_ops,
 	.freeze			= nv_nf2_freeze,
 	.thaw			= nv_nf2_thaw,
-	.hardreset		= nv_nf2_hardreset,
+	.hardreset		= nv_noclassify_hardreset,
 };
 
 /* CK804 finally gets hardreset right */
@@ -467,8 +468,19 @@
 	.host_stop		= nv_adma_host_stop,
 };
 
+/* Kernel bz#12351 reports that when SWNCQ is enabled, for hotplug to
+ * work, hardreset should be used and hardreset can't report proper
+ * signature, which suggests that mcp5x is closer to nf2 as long as
+ * reset quirkiness is concerned.  Define separate ops for mcp5x with
+ * nv_noclassify_hardreset().
+ */
+static struct ata_port_operations nv_mcp5x_ops = {
+	.inherits		= &nv_common_ops,
+	.hardreset		= nv_noclassify_hardreset,
+};
+
 static struct ata_port_operations nv_swncq_ops = {
-	.inherits		= &nv_generic_ops,
+	.inherits		= &nv_mcp5x_ops,
 
 	.qc_defer		= ata_std_qc_defer,
 	.qc_prep		= nv_swncq_qc_prep,
@@ -531,6 +543,15 @@
 		.port_ops	= &nv_adma_ops,
 		.private_data	= NV_PI_PRIV(nv_adma_interrupt, &nv_adma_sht),
 	},
+	/* MCP5x */
+	{
+		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+		.pio_mask	= NV_PIO_MASK,
+		.mwdma_mask	= NV_MWDMA_MASK,
+		.udma_mask	= NV_UDMA_MASK,
+		.port_ops	= &nv_mcp5x_ops,
+		.private_data	= NV_PI_PRIV(nv_generic_interrupt, &nv_sht),
+	},
 	/* SWNCQ */
 	{
 		.flags	        = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
@@ -1530,6 +1551,17 @@
 	return 0;
 }
 
+static int nv_noclassify_hardreset(struct ata_link *link, unsigned int *class,
+				   unsigned long deadline)
+{
+	bool online;
+	int rc;
+
+	rc = sata_link_hardreset(link, sata_deb_timing_hotplug, deadline,
+				 &online, NULL);
+	return online ? -EAGAIN : rc;
+}
+
 static void nv_nf2_freeze(struct ata_port *ap)
 {
 	void __iomem *scr_addr = ap->host->ports[0]->ioaddr.scr_addr;
@@ -1554,17 +1586,6 @@
 	iowrite8(mask, scr_addr + NV_INT_ENABLE);
 }
 
-static int nv_nf2_hardreset(struct ata_link *link, unsigned int *class,
-			    unsigned long deadline)
-{
-	bool online;
-	int rc;
-
-	rc = sata_link_hardreset(link, sata_deb_timing_hotplug, deadline,
-				 &online, NULL);
-	return online ? -EAGAIN : rc;
-}
-
 static void nv_ck804_freeze(struct ata_port *ap)
 {
 	void __iomem *mmio_base = ap->host->iomap[NV_MMIO_BAR];
@@ -2355,14 +2376,9 @@
 	if (type == CK804 && adma_enabled) {
 		dev_printk(KERN_NOTICE, &pdev->dev, "Using ADMA mode\n");
 		type = ADMA;
-	}
-
-	if (type == SWNCQ) {
-		if (swncq_enabled)
-			dev_printk(KERN_NOTICE, &pdev->dev,
-				   "Using SWNCQ mode\n");
-		else
-			type = GENERIC;
+	} else if (type == MCP5x && swncq_enabled) {
+		dev_printk(KERN_NOTICE, &pdev->dev, "Using SWNCQ mode\n");
+		type = SWNCQ;
 	}
 
 	ppi[0] = &nv_port_info[type];
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 564c142..bfd55b0 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -695,11 +695,38 @@
 	}
 }
 
+static bool sil_broken_system_poweroff(struct pci_dev *pdev)
+{
+	static const struct dmi_system_id broken_systems[] = {
+		{
+			.ident = "HP Compaq nx6325",
+			.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+				DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6325"),
+			},
+			/* PCI slot number of the controller */
+			.driver_data = (void *)0x12UL,
+		},
+
+		{ }	/* terminate list */
+	};
+	const struct dmi_system_id *dmi = dmi_first_match(broken_systems);
+
+	if (dmi) {
+		unsigned long slot = (unsigned long)dmi->driver_data;
+		/* apply the quirk only to on-board controllers */
+		return slot == PCI_SLOT(pdev->devfn);
+	}
+
+	return false;
+}
+
 static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
 	int board_id = ent->driver_data;
-	const struct ata_port_info *ppi[] = { &sil_port_info[board_id], NULL };
+	struct ata_port_info pi = sil_port_info[board_id];
+	const struct ata_port_info *ppi[] = { &pi, NULL };
 	struct ata_host *host;
 	void __iomem *mmio_base;
 	int n_ports, rc;
@@ -713,6 +740,13 @@
 	if (board_id == sil_3114)
 		n_ports = 4;
 
+	if (sil_broken_system_poweroff(pdev)) {
+		pi.flags |= ATA_FLAG_NO_POWEROFF_SPINDOWN |
+					ATA_FLAG_NO_HIBERNATE_SPINDOWN;
+		dev_info(&pdev->dev, "quirky BIOS, skipping spindown "
+				"on poweroff and hibernation\n");
+	}
+
 	host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
 	if (!host)
 		return -ENOMEM;
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index c18935f..5c62da9 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -92,6 +92,8 @@
 	{ PCI_VDEVICE(VIA, 0x5372), vt6420 },
 	{ PCI_VDEVICE(VIA, 0x7372), vt6420 },
 	{ PCI_VDEVICE(VIA, 0x5287), vt8251 }, /* 2 sata chnls (Master/Slave) */
+	{ PCI_VDEVICE(VIA, 0x9000), vt8251 },
+	{ PCI_VDEVICE(VIA, 0x9040), vt8251 },
 
 	{ }	/* terminate list */
 };
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 8079afc..55e5309 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -777,10 +777,16 @@
 int dev_set_name(struct device *dev, const char *fmt, ...)
 {
 	va_list vargs;
+	char *s;
 
 	va_start(vargs, fmt);
 	vsnprintf(dev->bus_id, sizeof(dev->bus_id), fmt, vargs);
 	va_end(vargs);
+
+	/* ewww... some of these buggers have / in the name... */
+	while ((s = strchr(dev->bus_id, '/')))
+		*s = '!';
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(dev_set_name);
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 7bcc1d8b..34f80fa 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -406,6 +406,7 @@
 	ret = sysfs_create_file(&disk_to_dev(lo->disk)->kobj, &pid_attr.attr);
 	if (ret) {
 		printk(KERN_ERR "nbd: sysfs_create_file failed!");
+		lo->pid = 0;
 		return ret;
 	}
 
@@ -413,6 +414,7 @@
 		nbd_end_request(req);
 
 	sysfs_remove_file(&disk_to_dev(lo->disk)->kobj, &pid_attr.attr);
+	lo->pid = 0;
 	return 0;
 }
 
@@ -648,6 +650,8 @@
 		set_capacity(lo->disk, lo->bytesize >> 9);
 		return 0;
 	case NBD_DO_IT:
+		if (lo->pid)
+			return -EBUSY;
 		if (!lo->file)
 			return -EINVAL;
 		thread = kthread_create(nbd_thread, lo, lo->disk->disk_name);
diff --git a/drivers/block/ps3disk.c b/drivers/block/ps3disk.c
index 936466f..bccc42b 100644
--- a/drivers/block/ps3disk.c
+++ b/drivers/block/ps3disk.c
@@ -141,7 +141,7 @@
 
 	start_sector = req->sector * priv->blocking_factor;
 	sectors = req->nr_sectors * priv->blocking_factor;
-	dev_dbg(&dev->sbd.core, "%s:%u: %s %lu sectors starting at %lu\n",
+	dev_dbg(&dev->sbd.core, "%s:%u: %s %llu sectors starting at %llu\n",
 		__func__, __LINE__, op, sectors, start_sector);
 
 	if (write) {
@@ -178,7 +178,7 @@
 					      LV1_STORAGE_ATA_HDDOUT, 0, 0, 0,
 					      0, &dev->tag);
 	if (res) {
-		dev_err(&dev->sbd.core, "%s:%u: sync cache failed 0x%lx\n",
+		dev_err(&dev->sbd.core, "%s:%u: sync cache failed 0x%llx\n",
 			__func__, __LINE__, res);
 		end_request(req, 0);
 		return 0;
@@ -238,11 +238,11 @@
 
 	if (tag != dev->tag)
 		dev_err(&dev->sbd.core,
-			"%s:%u: tag mismatch, got %lx, expected %lx\n",
+			"%s:%u: tag mismatch, got %llx, expected %llx\n",
 			__func__, __LINE__, tag, dev->tag);
 
 	if (res) {
-		dev_err(&dev->sbd.core, "%s:%u: res=%d status=0x%lx\n",
+		dev_err(&dev->sbd.core, "%s:%u: res=%d status=0x%llx\n",
 			__func__, __LINE__, res, status);
 		return IRQ_HANDLED;
 	}
@@ -269,7 +269,7 @@
 		op = read ? "read" : "write";
 	}
 	if (status) {
-		dev_dbg(&dev->sbd.core, "%s:%u: %s failed 0x%lx\n", __func__,
+		dev_dbg(&dev->sbd.core, "%s:%u: %s failed 0x%llx\n", __func__,
 			__LINE__, op, status);
 		error = -EIO;
 	} else {
@@ -297,7 +297,7 @@
 
 	res = ps3stor_send_command(dev, LV1_STORAGE_ATA_HDDOUT, 0, 0, 0, 0);
 	if (res) {
-		dev_err(&dev->sbd.core, "%s:%u: sync cache failed 0x%lx\n",
+		dev_err(&dev->sbd.core, "%s:%u: sync cache failed 0x%llx\n",
 			__func__, __LINE__, res);
 		return -EIO;
 	}
@@ -388,7 +388,7 @@
 				   sizeof(ata_cmnd), ata_cmnd.buffer,
 				   ata_cmnd.arglen);
 	if (res) {
-		dev_err(&dev->sbd.core, "%s:%u: identify disk failed 0x%lx\n",
+		dev_err(&dev->sbd.core, "%s:%u: identify disk failed 0x%llx\n",
 			__func__, __LINE__, res);
 		return -EIO;
 	}
@@ -426,7 +426,7 @@
 
 	if (dev->blk_size < 512) {
 		dev_err(&dev->sbd.core,
-			"%s:%u: cannot handle block size %lu\n", __func__,
+			"%s:%u: cannot handle block size %llu\n", __func__,
 			__LINE__, dev->blk_size);
 		return -EINVAL;
 	}
@@ -512,7 +512,7 @@
 		     dev->regions[dev->region_idx].size*priv->blocking_factor);
 
 	dev_info(&dev->sbd.core,
-		 "%s is a %s (%lu MiB total, %lu MiB for OtherOS)\n",
+		 "%s is a %s (%llu MiB total, %lu MiB for OtherOS)\n",
 		 gendisk->disk_name, priv->model, priv->raw_capacity >> 11,
 		 get_capacity(gendisk) >> 11);
 
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index 29e1dfa..381d686 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -1206,6 +1206,7 @@
 	{ .compatible = "xlnx,opb-sysace-1.00.b", },
 	{ .compatible = "xlnx,opb-sysace-1.00.c", },
 	{ .compatible = "xlnx,xps-sysace-1.00.a", },
+	{ .compatible = "xlnx,sysace", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, ace_of_match);
diff --git a/drivers/char/bsr.c b/drivers/char/bsr.c
index 977dfb1..f6094ae 100644
--- a/drivers/char/bsr.c
+++ b/drivers/char/bsr.c
@@ -103,7 +103,7 @@
 bsr_len_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct bsr_dev *bsr_dev = dev_get_drvdata(dev);
-	return sprintf(buf, "%lu\n", bsr_dev->bsr_len);
+	return sprintf(buf, "%llu\n", bsr_dev->bsr_len);
 }
 
 static struct device_attribute bsr_dev_attrs[] = {
diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index 5a8a4c2..94e7e3c 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -318,7 +318,6 @@
 	} /* else count == 0 */
 
 	tty->driver_data = hp;
-	tty->low_latency = 1; /* Makes flushes to ldisc synchronous. */
 
 	hp->tty = tty;
 
@@ -764,13 +763,11 @@
 			return ERR_PTR(err);
 	}
 
-	hp = kmalloc(ALIGN(sizeof(*hp), sizeof(long)) + outbuf_size,
+	hp = kzalloc(ALIGN(sizeof(*hp), sizeof(long)) + outbuf_size,
 			GFP_KERNEL);
 	if (!hp)
 		return ERR_PTR(-ENOMEM);
 
-	memset(hp, 0x00, sizeof(*hp));
-
 	hp->vtermno = vtermno;
 	hp->data = data;
 	hp->ops = ops;
@@ -876,8 +873,11 @@
 		goto stop_thread;
 	}
 
-	/* FIXME: This mb() seems completely random.  Remove it. */
-	mb();
+	/*
+	 * Make sure tty is fully registered before allowing it to be
+	 * found by hvc_console_device.
+	 */
+	smp_mb();
 	hvc_driver = drv;
 	return 0;
 
diff --git a/drivers/char/hvc_irq.c b/drivers/char/hvc_irq.c
index d09e568..2623e17 100644
--- a/drivers/char/hvc_irq.c
+++ b/drivers/char/hvc_irq.c
@@ -37,7 +37,7 @@
 
 void notifier_del_irq(struct hvc_struct *hp, int irq)
 {
-	if (!irq)
+	if (!hp->irq_requested)
 		return;
 	free_irq(irq, hp);
 	hp->irq_requested = 0;
diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c
index d4e7dca..ba68a46 100644
--- a/drivers/char/hw_random/omap-rng.c
+++ b/drivers/char/hw_random/omap-rng.c
@@ -102,7 +102,7 @@
 		return -EBUSY;
 
 	if (cpu_is_omap24xx()) {
-		rng_ick = clk_get(NULL, "rng_ick");
+		rng_ick = clk_get(&pdev->dev, "rng_ick");
 		if (IS_ERR(rng_ick)) {
 			dev_err(&pdev->dev, "Could not get rng_ick\n");
 			ret = PTR_ERR(rng_ick);
diff --git a/drivers/char/ps3flash.c b/drivers/char/ps3flash.c
index 79b6f46..afbe456 100644
--- a/drivers/char/ps3flash.c
+++ b/drivers/char/ps3flash.c
@@ -44,7 +44,7 @@
 	u64 res = ps3stor_read_write_sectors(dev, lpar, start_sector, sectors,
 					     write);
 	if (res) {
-		dev_err(&dev->sbd.core, "%s:%u: %s failed 0x%lx\n", __func__,
+		dev_err(&dev->sbd.core, "%s:%u: %s failed 0x%llx\n", __func__,
 			__LINE__, write ? "write" : "read", res);
 		return -EIO;
 	}
@@ -59,7 +59,7 @@
 
 	max_sectors = dev->bounce_size / dev->blk_size;
 	if (sectors > max_sectors) {
-		dev_dbg(&dev->sbd.core, "%s:%u Limiting sectors to %lu\n",
+		dev_dbg(&dev->sbd.core, "%s:%u Limiting sectors to %llu\n",
 			__func__, __LINE__, max_sectors);
 		sectors = max_sectors;
 	}
@@ -144,7 +144,7 @@
 			goto fail;
 		}
 
-		n = min(remaining, sectors_read*dev->blk_size-offset);
+		n = min_t(u64, remaining, sectors_read*dev->blk_size-offset);
 		dev_dbg(&dev->sbd.core,
 			"%s:%u: copy %lu bytes from 0x%p to user 0x%p\n",
 			__func__, __LINE__, n, dev->bounce_buf+offset, buf);
@@ -225,7 +225,7 @@
 		if (end_read_sector >= start_read_sector) {
 			/* Merge head and tail */
 			dev_dbg(&dev->sbd.core,
-				"Merged head and tail: %lu sectors at %lu\n",
+				"Merged head and tail: %llu sectors at %llu\n",
 				chunk_sectors, start_write_sector);
 			res = ps3flash_read_sectors(dev, start_write_sector,
 						    chunk_sectors, 0);
@@ -235,7 +235,7 @@
 			if (head) {
 				/* Read head */
 				dev_dbg(&dev->sbd.core,
-					"head: %lu sectors at %lu\n", head,
+					"head: %llu sectors at %llu\n", head,
 					start_write_sector);
 				res = ps3flash_read_sectors(dev,
 							    start_write_sector,
@@ -247,7 +247,7 @@
 			    start_write_sector+chunk_sectors) {
 				/* Read tail */
 				dev_dbg(&dev->sbd.core,
-					"tail: %lu sectors at %lu\n", tail,
+					"tail: %llu sectors at %llu\n", tail,
 					start_read_sector);
 				sec_off = start_read_sector-start_write_sector;
 				res = ps3flash_read_sectors(dev,
@@ -258,7 +258,7 @@
 			}
 		}
 
-		n = min(remaining, dev->bounce_size-offset);
+		n = min_t(u64, remaining, dev->bounce_size-offset);
 		dev_dbg(&dev->sbd.core,
 			"%s:%u: copy %lu bytes from user 0x%p to 0x%p\n",
 			__func__, __LINE__, n, buf, dev->bounce_buf+offset);
@@ -299,11 +299,11 @@
 
 	if (tag != dev->tag)
 		dev_err(&dev->sbd.core,
-			"%s:%u: tag mismatch, got %lx, expected %lx\n",
+			"%s:%u: tag mismatch, got %llx, expected %llx\n",
 			__func__, __LINE__, tag, dev->tag);
 
 	if (res) {
-		dev_err(&dev->sbd.core, "%s:%u: res=%d status=0x%lx\n",
+		dev_err(&dev->sbd.core, "%s:%u: res=%d status=0x%llx\n",
 			__func__, __LINE__, res, status);
 	} else {
 		dev->lv1_status = status;
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index 53544e2..f329f45 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -1,6 +1,4 @@
 /*
- * $Id: synclink_gt.c,v 4.50 2007/07/25 19:29:25 paulkf Exp $
- *
  * Device driver for Microgate SyncLink GT serial adapters.
  *
  * written by Paul Fulghum for Microgate Corporation
@@ -91,7 +89,6 @@
  * module identification
  */
 static char *driver_name     = "SyncLink GT";
-static char *driver_version  = "$Revision: 4.50 $";
 static char *tty_driver_name = "synclink_gt";
 static char *tty_dev_prefix  = "ttySLG";
 MODULE_LICENSE("GPL");
@@ -1309,7 +1306,7 @@
 	off_t	begin = 0;
 	struct slgt_info *info;
 
-	len += sprintf(page, "synclink_gt driver:%s\n", driver_version);
+	len += sprintf(page, "synclink_gt driver\n");
 
 	info = slgt_device_list;
 	while( info ) {
@@ -2441,7 +2438,7 @@
 	info->ri_chkcount = 0;
 	info->dsr_chkcount = 0;
 
-	slgt_irq_on(info, IRQ_DCD | IRQ_CTS | IRQ_DSR);
+	slgt_irq_on(info, IRQ_DCD | IRQ_CTS | IRQ_DSR | IRQ_RI);
 	get_signals(info);
 
 	if (info->netcount ||
@@ -3576,7 +3573,7 @@
 	struct slgt_info *info;
 	struct slgt_info *tmp;
 
-	printk("unload %s %s\n", driver_name, driver_version);
+	printk(KERN_INFO "unload %s\n", driver_name);
 
 	if (serial_driver) {
 		for (info=slgt_device_list ; info != NULL ; info=info->next_device)
@@ -3619,7 +3616,7 @@
 {
 	int rc;
 
- 	printk("%s %s\n", driver_name, driver_version);
+	printk(KERN_INFO "%s\n", driver_name);
 
 	serial_driver = alloc_tty_driver(MAX_DEVICES);
 	if (!serial_driver) {
@@ -3650,9 +3647,8 @@
 		goto error;
 	}
 
- 	printk("%s %s, tty major#%d\n",
-		driver_name, driver_version,
-		serial_driver->major);
+	printk(KERN_INFO "%s, tty major#%d\n",
+	       driver_name, serial_driver->major);
 
 	slgt_device_count = 0;
 	if ((rc = pci_register_driver(&pci_driver)) < 0) {
diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c
index d41b9f6..33a9351 100644
--- a/drivers/char/sysrq.c
+++ b/drivers/char/sysrq.c
@@ -473,6 +473,12 @@
 	unsigned long flags;
 
 	spin_lock_irqsave(&sysrq_key_table_lock, flags);
+	/*
+	 * Raise the apparent loglevel to maximum so that the sysrq header
+	 * is shown to provide the user with positive feedback.  We do not
+	 * simply emit this at KERN_EMERG as that would change message
+	 * routing in the consumers of /proc/kmsg.
+	 */
 	orig_log_level = console_loglevel;
 	console_loglevel = 7;
 	printk(KERN_INFO "SysRq : ");
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index d33e5ab..bc84e12 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1817,8 +1817,10 @@
 		/* check whether we're reopening an existing tty */
 		tty = tty_driver_lookup_tty(driver, inode, index);
 
-		if (IS_ERR(tty))
+		if (IS_ERR(tty)) {
+			mutex_unlock(&tty_mutex);
 			return PTR_ERR(tty);
+		}
 	}
 
 	if (tty) {
diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c
index a408c8e..6f4c7d0 100644
--- a/drivers/char/tty_ioctl.c
+++ b/drivers/char/tty_ioctl.c
@@ -1057,7 +1057,7 @@
 	if (retval)
 		return retval;
 
-	ld = tty_ldisc_ref(tty);
+	ld = tty_ldisc_ref_wait(tty);
 	switch (arg) {
 	case TCIFLUSH:
 		if (ld && ld->ops->flush_buffer)
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index e34b064..48ea59e 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -62,6 +62,25 @@
 	---help---
 	  Enable support for the Marvell XOR engine.
 
+config MX3_IPU
+	bool "MX3x Image Processing Unit support"
+	depends on ARCH_MX3
+	select DMA_ENGINE
+	default y
+	help
+	  If you plan to use the Image Processing unit in the i.MX3x, say
+	  Y here. If unsure, select Y.
+
+config MX3_IPU_IRQS
+	int "Number of dynamically mapped interrupts for IPU"
+	depends on MX3_IPU
+	range 2 137
+	default 4
+	help
+	  Out of 137 interrupt sources on i.MX31 IPU only very few are used.
+	  To avoid bloating the irq_desc[] array we allocate a sufficient
+	  number of IRQ slots and map them dynamically to specific sources.
+
 config DMA_ENGINE
 	bool
 
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 14f5952..2e5dc96 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -7,3 +7,4 @@
 obj-$(CONFIG_FSL_DMA) += fsldma.o
 obj-$(CONFIG_MV_XOR) += mv_xor.o
 obj-$(CONFIG_DW_DMAC) += dw_dmac.o
+obj-$(CONFIG_MX3_IPU) += ipu/
diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index 403dbe7..a589930 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -329,9 +329,6 @@
 	struct dma_chan *chan;
 	int cpu;
 
-	WARN_ONCE(dmaengine_ref_count == 0,
-		  "client called %s without a reference", __func__);
-
 	cpu = get_cpu();
 	chan = per_cpu_ptr(channel_table[tx_type], cpu)->chan;
 	put_cpu();
@@ -348,9 +345,6 @@
 	struct dma_device *device;
 	struct dma_chan *chan;
 
-	WARN_ONCE(dmaengine_ref_count == 0,
-		  "client called %s without a reference", __func__);
-
 	rcu_read_lock();
 	list_for_each_entry_rcu(device, &dma_device_list, global_node) {
 		if (dma_has_cap(DMA_PRIVATE, device->cap_mask))
@@ -961,6 +955,8 @@
 	if (!dep)
 		return;
 
+	/* we'll submit tx->next now, so clear the link */
+	tx->next = NULL;
 	chan = dep->chan;
 
 	/* keep submitting up until a channel switch is detected
diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index 3603f1e..732fa1e 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -217,6 +217,10 @@
 	chan = thread->chan;
 
 	while (!kthread_should_stop()) {
+		struct dma_device *dev = chan->device;
+		struct dma_async_tx_descriptor *tx;
+		dma_addr_t dma_src, dma_dest;
+
 		total_tests++;
 
 		len = dmatest_random() % test_buf_size + 1;
@@ -226,10 +230,30 @@
 		dmatest_init_srcbuf(thread->srcbuf, src_off, len);
 		dmatest_init_dstbuf(thread->dstbuf, dst_off, len);
 
-		cookie = dma_async_memcpy_buf_to_buf(chan,
-				thread->dstbuf + dst_off,
-				thread->srcbuf + src_off,
-				len);
+		dma_src = dma_map_single(dev->dev, thread->srcbuf + src_off,
+				len, DMA_TO_DEVICE);
+		/* map with DMA_BIDIRECTIONAL to force writeback/invalidate */
+		dma_dest = dma_map_single(dev->dev, thread->dstbuf,
+				test_buf_size, DMA_BIDIRECTIONAL);
+
+		tx = dev->device_prep_dma_memcpy(chan, dma_dest + dst_off,
+				dma_src, len,
+				DMA_CTRL_ACK | DMA_COMPL_SKIP_DEST_UNMAP);
+		if (!tx) {
+			dma_unmap_single(dev->dev, dma_src, len, DMA_TO_DEVICE);
+			dma_unmap_single(dev->dev, dma_dest,
+					test_buf_size, DMA_BIDIRECTIONAL);
+			pr_warning("%s: #%u: prep error with src_off=0x%x "
+					"dst_off=0x%x len=0x%x\n",
+					thread_name, total_tests - 1,
+					src_off, dst_off, len);
+			msleep(100);
+			failed_tests++;
+			continue;
+		}
+		tx->callback = NULL;
+		cookie = tx->tx_submit(tx);
+
 		if (dma_submit_error(cookie)) {
 			pr_warning("%s: #%u: submit error %d with src_off=0x%x "
 					"dst_off=0x%x len=0x%x\n",
@@ -253,6 +277,9 @@
 			failed_tests++;
 			continue;
 		}
+		/* Unmap by myself (see DMA_COMPL_SKIP_DEST_UNMAP above) */
+		dma_unmap_single(dev->dev, dma_dest,
+				test_buf_size, DMA_BIDIRECTIONAL);
 
 		error_count = 0;
 
diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c
index ca70a21..70126a6 100644
--- a/drivers/dma/fsldma.c
+++ b/drivers/dma/fsldma.c
@@ -822,7 +822,7 @@
 	 */
 	WARN_ON(fdev->feature != new_fsl_chan->feature);
 
-	new_fsl_chan->dev = &new_fsl_chan->common.dev->device;
+	new_fsl_chan->dev = fdev->dev;
 	new_fsl_chan->reg_base = ioremap(new_fsl_chan->reg.start,
 			new_fsl_chan->reg.end - new_fsl_chan->reg.start + 1);
 
@@ -875,7 +875,8 @@
 	}
 
 	dev_info(fdev->dev, "#%d (%s), irq %d\n", new_fsl_chan->id,
-				compatible, new_fsl_chan->irq);
+		 compatible,
+		 new_fsl_chan->irq != NO_IRQ ? new_fsl_chan->irq : fdev->irq);
 
 	return 0;
 
@@ -890,7 +891,8 @@
 
 static void fsl_dma_chan_remove(struct fsl_dma_chan *fchan)
 {
-	free_irq(fchan->irq, fchan);
+	if (fchan->irq != NO_IRQ)
+		free_irq(fchan->irq, fchan);
 	list_del(&fchan->common.device_node);
 	iounmap(fchan->reg_base);
 	kfree(fchan);
diff --git a/drivers/dma/ipu/Makefile b/drivers/dma/ipu/Makefile
new file mode 100644
index 0000000..6704cf4
--- /dev/null
+++ b/drivers/dma/ipu/Makefile
@@ -0,0 +1 @@
+obj-y	+= ipu_irq.o ipu_idmac.o
diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c
new file mode 100644
index 0000000..1f154d0
--- /dev/null
+++ b/drivers/dma/ipu/ipu_idmac.c
@@ -0,0 +1,1740 @@
+/*
+ * Copyright (C) 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * Copyright (C) 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/vmalloc.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <mach/ipu.h>
+
+#include "ipu_intern.h"
+
+#define FS_VF_IN_VALID	0x00000002
+#define FS_ENC_IN_VALID	0x00000001
+
+/*
+ * There can be only one, we could allocate it dynamically, but then we'd have
+ * to add an extra parameter to some functions, and use something as ugly as
+ *	struct ipu *ipu = to_ipu(to_idmac(ichan->dma_chan.device));
+ * in the ISR
+ */
+static struct ipu ipu_data;
+
+#define to_ipu(id) container_of(id, struct ipu, idmac)
+
+static u32 __idmac_read_icreg(struct ipu *ipu, unsigned long reg)
+{
+	return __raw_readl(ipu->reg_ic + reg);
+}
+
+#define idmac_read_icreg(ipu, reg) __idmac_read_icreg(ipu, reg - IC_CONF)
+
+static void __idmac_write_icreg(struct ipu *ipu, u32 value, unsigned long reg)
+{
+	__raw_writel(value, ipu->reg_ic + reg);
+}
+
+#define idmac_write_icreg(ipu, v, reg) __idmac_write_icreg(ipu, v, reg - IC_CONF)
+
+static u32 idmac_read_ipureg(struct ipu *ipu, unsigned long reg)
+{
+	return __raw_readl(ipu->reg_ipu + reg);
+}
+
+static void idmac_write_ipureg(struct ipu *ipu, u32 value, unsigned long reg)
+{
+	__raw_writel(value, ipu->reg_ipu + reg);
+}
+
+/*****************************************************************************
+ * IPU / IC common functions
+ */
+static void dump_idmac_reg(struct ipu *ipu)
+{
+	dev_dbg(ipu->dev, "IDMAC_CONF 0x%x, IC_CONF 0x%x, IDMAC_CHA_EN 0x%x, "
+		"IDMAC_CHA_PRI 0x%x, IDMAC_CHA_BUSY 0x%x\n",
+		idmac_read_icreg(ipu, IDMAC_CONF),
+		idmac_read_icreg(ipu, IC_CONF),
+		idmac_read_icreg(ipu, IDMAC_CHA_EN),
+		idmac_read_icreg(ipu, IDMAC_CHA_PRI),
+		idmac_read_icreg(ipu, IDMAC_CHA_BUSY));
+	dev_dbg(ipu->dev, "BUF0_RDY 0x%x, BUF1_RDY 0x%x, CUR_BUF 0x%x, "
+		"DB_MODE 0x%x, TASKS_STAT 0x%x\n",
+		idmac_read_ipureg(ipu, IPU_CHA_BUF0_RDY),
+		idmac_read_ipureg(ipu, IPU_CHA_BUF1_RDY),
+		idmac_read_ipureg(ipu, IPU_CHA_CUR_BUF),
+		idmac_read_ipureg(ipu, IPU_CHA_DB_MODE_SEL),
+		idmac_read_ipureg(ipu, IPU_TASKS_STAT));
+}
+
+static uint32_t bytes_per_pixel(enum pixel_fmt fmt)
+{
+	switch (fmt) {
+	case IPU_PIX_FMT_GENERIC:	/* generic data */
+	case IPU_PIX_FMT_RGB332:
+	case IPU_PIX_FMT_YUV420P:
+	case IPU_PIX_FMT_YUV422P:
+	default:
+		return 1;
+	case IPU_PIX_FMT_RGB565:
+	case IPU_PIX_FMT_YUYV:
+	case IPU_PIX_FMT_UYVY:
+		return 2;
+	case IPU_PIX_FMT_BGR24:
+	case IPU_PIX_FMT_RGB24:
+		return 3;
+	case IPU_PIX_FMT_GENERIC_32:	/* generic data */
+	case IPU_PIX_FMT_BGR32:
+	case IPU_PIX_FMT_RGB32:
+	case IPU_PIX_FMT_ABGR32:
+		return 4;
+	}
+}
+
+/* Enable / disable direct write to memory by the Camera Sensor Interface */
+static void ipu_ic_enable_task(struct ipu *ipu, enum ipu_channel channel)
+{
+	uint32_t ic_conf, mask;
+
+	switch (channel) {
+	case IDMAC_IC_0:
+		mask = IC_CONF_PRPENC_EN;
+		break;
+	case IDMAC_IC_7:
+		mask = IC_CONF_RWS_EN | IC_CONF_PRPENC_EN;
+		break;
+	default:
+		return;
+	}
+	ic_conf = idmac_read_icreg(ipu, IC_CONF) | mask;
+	idmac_write_icreg(ipu, ic_conf, IC_CONF);
+}
+
+static void ipu_ic_disable_task(struct ipu *ipu, enum ipu_channel channel)
+{
+	uint32_t ic_conf, mask;
+
+	switch (channel) {
+	case IDMAC_IC_0:
+		mask = IC_CONF_PRPENC_EN;
+		break;
+	case IDMAC_IC_7:
+		mask = IC_CONF_RWS_EN | IC_CONF_PRPENC_EN;
+		break;
+	default:
+		return;
+	}
+	ic_conf = idmac_read_icreg(ipu, IC_CONF) & ~mask;
+	idmac_write_icreg(ipu, ic_conf, IC_CONF);
+}
+
+static uint32_t ipu_channel_status(struct ipu *ipu, enum ipu_channel channel)
+{
+	uint32_t stat = TASK_STAT_IDLE;
+	uint32_t task_stat_reg = idmac_read_ipureg(ipu, IPU_TASKS_STAT);
+
+	switch (channel) {
+	case IDMAC_IC_7:
+		stat = (task_stat_reg & TSTAT_CSI2MEM_MASK) >>
+			TSTAT_CSI2MEM_OFFSET;
+		break;
+	case IDMAC_IC_0:
+	case IDMAC_SDC_0:
+	case IDMAC_SDC_1:
+	default:
+		break;
+	}
+	return stat;
+}
+
+struct chan_param_mem_planar {
+	/* Word 0 */
+	u32	xv:10;
+	u32	yv:10;
+	u32	xb:12;
+
+	u32	yb:12;
+	u32	res1:2;
+	u32	nsb:1;
+	u32	lnpb:6;
+	u32	ubo_l:11;
+
+	u32	ubo_h:15;
+	u32	vbo_l:17;
+
+	u32	vbo_h:9;
+	u32	res2:3;
+	u32	fw:12;
+	u32	fh_l:8;
+
+	u32	fh_h:4;
+	u32	res3:28;
+
+	/* Word 1 */
+	u32	eba0;
+
+	u32	eba1;
+
+	u32	bpp:3;
+	u32	sl:14;
+	u32	pfs:3;
+	u32	bam:3;
+	u32	res4:2;
+	u32	npb:6;
+	u32	res5:1;
+
+	u32	sat:2;
+	u32	res6:30;
+} __attribute__ ((packed));
+
+struct chan_param_mem_interleaved {
+	/* Word 0 */
+	u32	xv:10;
+	u32	yv:10;
+	u32	xb:12;
+
+	u32	yb:12;
+	u32	sce:1;
+	u32	res1:1;
+	u32	nsb:1;
+	u32	lnpb:6;
+	u32	sx:10;
+	u32	sy_l:1;
+
+	u32	sy_h:9;
+	u32	ns:10;
+	u32	sm:10;
+	u32	sdx_l:3;
+
+	u32	sdx_h:2;
+	u32	sdy:5;
+	u32	sdrx:1;
+	u32	sdry:1;
+	u32	sdr1:1;
+	u32	res2:2;
+	u32	fw:12;
+	u32	fh_l:8;
+
+	u32	fh_h:4;
+	u32	res3:28;
+
+	/* Word 1 */
+	u32	eba0;
+
+	u32	eba1;
+
+	u32	bpp:3;
+	u32	sl:14;
+	u32	pfs:3;
+	u32	bam:3;
+	u32	res4:2;
+	u32	npb:6;
+	u32	res5:1;
+
+	u32	sat:2;
+	u32	scc:1;
+	u32	ofs0:5;
+	u32	ofs1:5;
+	u32	ofs2:5;
+	u32	ofs3:5;
+	u32	wid0:3;
+	u32	wid1:3;
+	u32	wid2:3;
+
+	u32	wid3:3;
+	u32	dec_sel:1;
+	u32	res6:28;
+} __attribute__ ((packed));
+
+union chan_param_mem {
+	struct chan_param_mem_planar		pp;
+	struct chan_param_mem_interleaved	ip;
+};
+
+static void ipu_ch_param_set_plane_offset(union chan_param_mem *params,
+					  u32 u_offset, u32 v_offset)
+{
+	params->pp.ubo_l = u_offset & 0x7ff;
+	params->pp.ubo_h = u_offset >> 11;
+	params->pp.vbo_l = v_offset & 0x1ffff;
+	params->pp.vbo_h = v_offset >> 17;
+}
+
+static void ipu_ch_param_set_size(union chan_param_mem *params,
+				  uint32_t pixel_fmt, uint16_t width,
+				  uint16_t height, uint16_t stride)
+{
+	u32 u_offset;
+	u32 v_offset;
+
+	params->pp.fw		= width - 1;
+	params->pp.fh_l		= height - 1;
+	params->pp.fh_h		= (height - 1) >> 8;
+	params->pp.sl		= stride - 1;
+
+	switch (pixel_fmt) {
+	case IPU_PIX_FMT_GENERIC:
+		/*Represents 8-bit Generic data */
+		params->pp.bpp	= 3;
+		params->pp.pfs	= 7;
+		params->pp.npb	= 31;
+		params->pp.sat	= 2;		/* SAT = use 32-bit access */
+		break;
+	case IPU_PIX_FMT_GENERIC_32:
+		/*Represents 32-bit Generic data */
+		params->pp.bpp	= 0;
+		params->pp.pfs	= 7;
+		params->pp.npb	= 7;
+		params->pp.sat	= 2;		/* SAT = use 32-bit access */
+		break;
+	case IPU_PIX_FMT_RGB565:
+		params->ip.bpp	= 2;
+		params->ip.pfs	= 4;
+		params->ip.npb	= 7;
+		params->ip.sat	= 2;		/* SAT = 32-bit access */
+		params->ip.ofs0	= 0;		/* Red bit offset */
+		params->ip.ofs1	= 5;		/* Green bit offset */
+		params->ip.ofs2	= 11;		/* Blue bit offset */
+		params->ip.ofs3	= 16;		/* Alpha bit offset */
+		params->ip.wid0	= 4;		/* Red bit width - 1 */
+		params->ip.wid1	= 5;		/* Green bit width - 1 */
+		params->ip.wid2	= 4;		/* Blue bit width - 1 */
+		break;
+	case IPU_PIX_FMT_BGR24:
+		params->ip.bpp	= 1;		/* 24 BPP & RGB PFS */
+		params->ip.pfs	= 4;
+		params->ip.npb	= 7;
+		params->ip.sat	= 2;		/* SAT = 32-bit access */
+		params->ip.ofs0	= 0;		/* Red bit offset */
+		params->ip.ofs1	= 8;		/* Green bit offset */
+		params->ip.ofs2	= 16;		/* Blue bit offset */
+		params->ip.ofs3	= 24;		/* Alpha bit offset */
+		params->ip.wid0	= 7;		/* Red bit width - 1 */
+		params->ip.wid1	= 7;		/* Green bit width - 1 */
+		params->ip.wid2	= 7;		/* Blue bit width - 1 */
+		break;
+	case IPU_PIX_FMT_RGB24:
+		params->ip.bpp	= 1;		/* 24 BPP & RGB PFS */
+		params->ip.pfs	= 4;
+		params->ip.npb	= 7;
+		params->ip.sat	= 2;		/* SAT = 32-bit access */
+		params->ip.ofs0	= 16;		/* Red bit offset */
+		params->ip.ofs1	= 8;		/* Green bit offset */
+		params->ip.ofs2	= 0;		/* Blue bit offset */
+		params->ip.ofs3	= 24;		/* Alpha bit offset */
+		params->ip.wid0	= 7;		/* Red bit width - 1 */
+		params->ip.wid1	= 7;		/* Green bit width - 1 */
+		params->ip.wid2	= 7;		/* Blue bit width - 1 */
+		break;
+	case IPU_PIX_FMT_BGRA32:
+	case IPU_PIX_FMT_BGR32:
+		params->ip.bpp	= 0;
+		params->ip.pfs	= 4;
+		params->ip.npb	= 7;
+		params->ip.sat	= 2;		/* SAT = 32-bit access */
+		params->ip.ofs0	= 8;		/* Red bit offset */
+		params->ip.ofs1	= 16;		/* Green bit offset */
+		params->ip.ofs2	= 24;		/* Blue bit offset */
+		params->ip.ofs3	= 0;		/* Alpha bit offset */
+		params->ip.wid0	= 7;		/* Red bit width - 1 */
+		params->ip.wid1	= 7;		/* Green bit width - 1 */
+		params->ip.wid2	= 7;		/* Blue bit width - 1 */
+		params->ip.wid3	= 7;		/* Alpha bit width - 1 */
+		break;
+	case IPU_PIX_FMT_RGBA32:
+	case IPU_PIX_FMT_RGB32:
+		params->ip.bpp	= 0;
+		params->ip.pfs	= 4;
+		params->ip.npb	= 7;
+		params->ip.sat	= 2;		/* SAT = 32-bit access */
+		params->ip.ofs0	= 24;		/* Red bit offset */
+		params->ip.ofs1	= 16;		/* Green bit offset */
+		params->ip.ofs2	= 8;		/* Blue bit offset */
+		params->ip.ofs3	= 0;		/* Alpha bit offset */
+		params->ip.wid0	= 7;		/* Red bit width - 1 */
+		params->ip.wid1	= 7;		/* Green bit width - 1 */
+		params->ip.wid2	= 7;		/* Blue bit width - 1 */
+		params->ip.wid3	= 7;		/* Alpha bit width - 1 */
+		break;
+	case IPU_PIX_FMT_ABGR32:
+		params->ip.bpp	= 0;
+		params->ip.pfs	= 4;
+		params->ip.npb	= 7;
+		params->ip.sat	= 2;		/* SAT = 32-bit access */
+		params->ip.ofs0	= 8;		/* Red bit offset */
+		params->ip.ofs1	= 16;		/* Green bit offset */
+		params->ip.ofs2	= 24;		/* Blue bit offset */
+		params->ip.ofs3	= 0;		/* Alpha bit offset */
+		params->ip.wid0	= 7;		/* Red bit width - 1 */
+		params->ip.wid1	= 7;		/* Green bit width - 1 */
+		params->ip.wid2	= 7;		/* Blue bit width - 1 */
+		params->ip.wid3	= 7;		/* Alpha bit width - 1 */
+		break;
+	case IPU_PIX_FMT_UYVY:
+		params->ip.bpp	= 2;
+		params->ip.pfs	= 6;
+		params->ip.npb	= 7;
+		params->ip.sat	= 2;		/* SAT = 32-bit access */
+		break;
+	case IPU_PIX_FMT_YUV420P2:
+	case IPU_PIX_FMT_YUV420P:
+		params->ip.bpp	= 3;
+		params->ip.pfs	= 3;
+		params->ip.npb	= 7;
+		params->ip.sat	= 2;		/* SAT = 32-bit access */
+		u_offset = stride * height;
+		v_offset = u_offset + u_offset / 4;
+		ipu_ch_param_set_plane_offset(params, u_offset, v_offset);
+		break;
+	case IPU_PIX_FMT_YVU422P:
+		params->ip.bpp	= 3;
+		params->ip.pfs	= 2;
+		params->ip.npb	= 7;
+		params->ip.sat	= 2;		/* SAT = 32-bit access */
+		v_offset = stride * height;
+		u_offset = v_offset + v_offset / 2;
+		ipu_ch_param_set_plane_offset(params, u_offset, v_offset);
+		break;
+	case IPU_PIX_FMT_YUV422P:
+		params->ip.bpp	= 3;
+		params->ip.pfs	= 2;
+		params->ip.npb	= 7;
+		params->ip.sat	= 2;		/* SAT = 32-bit access */
+		u_offset = stride * height;
+		v_offset = u_offset + u_offset / 2;
+		ipu_ch_param_set_plane_offset(params, u_offset, v_offset);
+		break;
+	default:
+		dev_err(ipu_data.dev,
+			"mxc ipu: unimplemented pixel format %d\n", pixel_fmt);
+		break;
+	}
+
+	params->pp.nsb = 1;
+}
+
+static void ipu_ch_param_set_burst_size(union chan_param_mem *params,
+					uint16_t burst_pixels)
+{
+	params->pp.npb = burst_pixels - 1;
+};
+
+static void ipu_ch_param_set_buffer(union chan_param_mem *params,
+				    dma_addr_t buf0, dma_addr_t buf1)
+{
+	params->pp.eba0 = buf0;
+	params->pp.eba1 = buf1;
+};
+
+static void ipu_ch_param_set_rotation(union chan_param_mem *params,
+				      enum ipu_rotate_mode rotate)
+{
+	params->pp.bam = rotate;
+};
+
+static void ipu_write_param_mem(uint32_t addr, uint32_t *data,
+				uint32_t num_words)
+{
+	for (; num_words > 0; num_words--) {
+		dev_dbg(ipu_data.dev,
+			"write param mem - addr = 0x%08X, data = 0x%08X\n",
+			addr, *data);
+		idmac_write_ipureg(&ipu_data, addr, IPU_IMA_ADDR);
+		idmac_write_ipureg(&ipu_data, *data++, IPU_IMA_DATA);
+		addr++;
+		if ((addr & 0x7) == 5) {
+			addr &= ~0x7;	/* set to word 0 */
+			addr += 8;	/* increment to next row */
+		}
+	}
+}
+
+static int calc_resize_coeffs(uint32_t in_size, uint32_t out_size,
+			      uint32_t *resize_coeff,
+			      uint32_t *downsize_coeff)
+{
+	uint32_t temp_size;
+	uint32_t temp_downsize;
+
+	*resize_coeff	= 1 << 13;
+	*downsize_coeff	= 1 << 13;
+
+	/* Cannot downsize more than 8:1 */
+	if (out_size << 3 < in_size)
+		return -EINVAL;
+
+	/* compute downsizing coefficient */
+	temp_downsize = 0;
+	temp_size = in_size;
+	while (temp_size >= out_size * 2 && temp_downsize < 2) {
+		temp_size >>= 1;
+		temp_downsize++;
+	}
+	*downsize_coeff = temp_downsize;
+
+	/*
+	 * compute resizing coefficient using the following formula:
+	 * resize_coeff = M*(SI -1)/(SO - 1)
+	 * where M = 2^13, SI - input size, SO - output size
+	 */
+	*resize_coeff = (8192L * (temp_size - 1)) / (out_size - 1);
+	if (*resize_coeff >= 16384L) {
+		dev_err(ipu_data.dev, "Warning! Overflow on resize coeff.\n");
+		*resize_coeff = 0x3FFF;
+	}
+
+	dev_dbg(ipu_data.dev, "resizing from %u -> %u pixels, "
+		"downsize=%u, resize=%u.%lu (reg=%u)\n", in_size, out_size,
+		*downsize_coeff, *resize_coeff >= 8192L ? 1 : 0,
+		((*resize_coeff & 0x1FFF) * 10000L) / 8192L, *resize_coeff);
+
+	return 0;
+}
+
+static enum ipu_color_space format_to_colorspace(enum pixel_fmt fmt)
+{
+	switch (fmt) {
+	case IPU_PIX_FMT_RGB565:
+	case IPU_PIX_FMT_BGR24:
+	case IPU_PIX_FMT_RGB24:
+	case IPU_PIX_FMT_BGR32:
+	case IPU_PIX_FMT_RGB32:
+		return IPU_COLORSPACE_RGB;
+	default:
+		return IPU_COLORSPACE_YCBCR;
+	}
+}
+
+static int ipu_ic_init_prpenc(struct ipu *ipu,
+			      union ipu_channel_param *params, bool src_is_csi)
+{
+	uint32_t reg, ic_conf;
+	uint32_t downsize_coeff, resize_coeff;
+	enum ipu_color_space in_fmt, out_fmt;
+
+	/* Setup vertical resizing */
+	calc_resize_coeffs(params->video.in_height,
+			    params->video.out_height,
+			    &resize_coeff, &downsize_coeff);
+	reg = (downsize_coeff << 30) | (resize_coeff << 16);
+
+	/* Setup horizontal resizing */
+	calc_resize_coeffs(params->video.in_width,
+			    params->video.out_width,
+			    &resize_coeff, &downsize_coeff);
+	reg |= (downsize_coeff << 14) | resize_coeff;
+
+	/* Setup color space conversion */
+	in_fmt = format_to_colorspace(params->video.in_pixel_fmt);
+	out_fmt = format_to_colorspace(params->video.out_pixel_fmt);
+
+	/*
+	 * Colourspace conversion unsupported yet - see _init_csc() in
+	 * Freescale sources
+	 */
+	if (in_fmt != out_fmt) {
+		dev_err(ipu->dev, "Colourspace conversion unsupported!\n");
+		return -EOPNOTSUPP;
+	}
+
+	idmac_write_icreg(ipu, reg, IC_PRP_ENC_RSC);
+
+	ic_conf = idmac_read_icreg(ipu, IC_CONF);
+
+	if (src_is_csi)
+		ic_conf &= ~IC_CONF_RWS_EN;
+	else
+		ic_conf |= IC_CONF_RWS_EN;
+
+	idmac_write_icreg(ipu, ic_conf, IC_CONF);
+
+	return 0;
+}
+
+static uint32_t dma_param_addr(uint32_t dma_ch)
+{
+	/* Channel Parameter Memory */
+	return 0x10000 | (dma_ch << 4);
+};
+
+static void ipu_channel_set_priority(struct ipu *ipu, enum ipu_channel channel,
+				     bool prio)
+{
+	u32 reg = idmac_read_icreg(ipu, IDMAC_CHA_PRI);
+
+	if (prio)
+		reg |= 1UL << channel;
+	else
+		reg &= ~(1UL << channel);
+
+	idmac_write_icreg(ipu, reg, IDMAC_CHA_PRI);
+
+	dump_idmac_reg(ipu);
+}
+
+static uint32_t ipu_channel_conf_mask(enum ipu_channel channel)
+{
+	uint32_t mask;
+
+	switch (channel) {
+	case IDMAC_IC_0:
+	case IDMAC_IC_7:
+		mask = IPU_CONF_CSI_EN | IPU_CONF_IC_EN;
+		break;
+	case IDMAC_SDC_0:
+	case IDMAC_SDC_1:
+		mask = IPU_CONF_SDC_EN | IPU_CONF_DI_EN;
+		break;
+	default:
+		mask = 0;
+		break;
+	}
+
+	return mask;
+}
+
+/**
+ * ipu_enable_channel() - enable an IPU channel.
+ * @channel:	channel ID.
+ * @return:	0 on success or negative error code on failure.
+ */
+static int ipu_enable_channel(struct idmac *idmac, struct idmac_channel *ichan)
+{
+	struct ipu *ipu = to_ipu(idmac);
+	enum ipu_channel channel = ichan->dma_chan.chan_id;
+	uint32_t reg;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ipu->lock, flags);
+
+	/* Reset to buffer 0 */
+	idmac_write_ipureg(ipu, 1UL << channel, IPU_CHA_CUR_BUF);
+	ichan->active_buffer = 0;
+	ichan->status = IPU_CHANNEL_ENABLED;
+
+	switch (channel) {
+	case IDMAC_SDC_0:
+	case IDMAC_SDC_1:
+	case IDMAC_IC_7:
+		ipu_channel_set_priority(ipu, channel, true);
+	default:
+		break;
+	}
+
+	reg = idmac_read_icreg(ipu, IDMAC_CHA_EN);
+
+	idmac_write_icreg(ipu, reg | (1UL << channel), IDMAC_CHA_EN);
+
+	ipu_ic_enable_task(ipu, channel);
+
+	spin_unlock_irqrestore(&ipu->lock, flags);
+	return 0;
+}
+
+/**
+ * ipu_init_channel_buffer() - initialize a buffer for logical IPU channel.
+ * @channel:	channel ID.
+ * @pixel_fmt:	pixel format of buffer. Pixel format is a FOURCC ASCII code.
+ * @width:	width of buffer in pixels.
+ * @height:	height of buffer in pixels.
+ * @stride:	stride length of buffer in pixels.
+ * @rot_mode:	rotation mode of buffer. A rotation setting other than
+ *		IPU_ROTATE_VERT_FLIP should only be used for input buffers of
+ *		rotation channels.
+ * @phyaddr_0:	buffer 0 physical address.
+ * @phyaddr_1:	buffer 1 physical address. Setting this to a value other than
+ *		NULL enables double buffering mode.
+ * @return:	0 on success or negative error code on failure.
+ */
+static int ipu_init_channel_buffer(struct idmac_channel *ichan,
+				   enum pixel_fmt pixel_fmt,
+				   uint16_t width, uint16_t height,
+				   uint32_t stride,
+				   enum ipu_rotate_mode rot_mode,
+				   dma_addr_t phyaddr_0, dma_addr_t phyaddr_1)
+{
+	enum ipu_channel channel = ichan->dma_chan.chan_id;
+	struct idmac *idmac = to_idmac(ichan->dma_chan.device);
+	struct ipu *ipu = to_ipu(idmac);
+	union chan_param_mem params = {};
+	unsigned long flags;
+	uint32_t reg;
+	uint32_t stride_bytes;
+
+	stride_bytes = stride * bytes_per_pixel(pixel_fmt);
+
+	if (stride_bytes % 4) {
+		dev_err(ipu->dev,
+			"Stride length must be 32-bit aligned, stride = %d, bytes = %d\n",
+			stride, stride_bytes);
+		return -EINVAL;
+	}
+
+	/* IC channel's stride must be a multiple of 8 pixels */
+	if ((channel <= 13) && (stride % 8)) {
+		dev_err(ipu->dev, "Stride must be 8 pixel multiple\n");
+		return -EINVAL;
+	}
+
+	/* Build parameter memory data for DMA channel */
+	ipu_ch_param_set_size(&params, pixel_fmt, width, height, stride_bytes);
+	ipu_ch_param_set_buffer(&params, phyaddr_0, phyaddr_1);
+	ipu_ch_param_set_rotation(&params, rot_mode);
+	/* Some channels (rotation) have restriction on burst length */
+	switch (channel) {
+	case IDMAC_IC_7:	/* Hangs with burst 8, 16, other values
+				   invalid - Table 44-30 */
+/*
+		ipu_ch_param_set_burst_size(&params, 8);
+ */
+		break;
+	case IDMAC_SDC_0:
+	case IDMAC_SDC_1:
+		/* In original code only IPU_PIX_FMT_RGB565 was setting burst */
+		ipu_ch_param_set_burst_size(&params, 16);
+		break;
+	case IDMAC_IC_0:
+	default:
+		break;
+	}
+
+	spin_lock_irqsave(&ipu->lock, flags);
+
+	ipu_write_param_mem(dma_param_addr(channel), (uint32_t *)&params, 10);
+
+	reg = idmac_read_ipureg(ipu, IPU_CHA_DB_MODE_SEL);
+
+	if (phyaddr_1)
+		reg |= 1UL << channel;
+	else
+		reg &= ~(1UL << channel);
+
+	idmac_write_ipureg(ipu, reg, IPU_CHA_DB_MODE_SEL);
+
+	ichan->status = IPU_CHANNEL_READY;
+
+	spin_unlock_irqrestore(ipu->lock, flags);
+
+	return 0;
+}
+
+/**
+ * ipu_select_buffer() - mark a channel's buffer as ready.
+ * @channel:	channel ID.
+ * @buffer_n:	buffer number to mark ready.
+ */
+static void ipu_select_buffer(enum ipu_channel channel, int buffer_n)
+{
+	/* No locking - this is a write-one-to-set register, cleared by IPU */
+	if (buffer_n == 0)
+		/* Mark buffer 0 as ready. */
+		idmac_write_ipureg(&ipu_data, 1UL << channel, IPU_CHA_BUF0_RDY);
+	else
+		/* Mark buffer 1 as ready. */
+		idmac_write_ipureg(&ipu_data, 1UL << channel, IPU_CHA_BUF1_RDY);
+}
+
+/**
+ * ipu_update_channel_buffer() - update physical address of a channel buffer.
+ * @channel:	channel ID.
+ * @buffer_n:	buffer number to update.
+ *		0 or 1 are the only valid values.
+ * @phyaddr:	buffer physical address.
+ * @return:	Returns 0 on success or negative error code on failure. This
+ *              function will fail if the buffer is set to ready.
+ */
+/* Called under spin_lock(_irqsave)(&ichan->lock) */
+static int ipu_update_channel_buffer(enum ipu_channel channel,
+				     int buffer_n, dma_addr_t phyaddr)
+{
+	uint32_t reg;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ipu_data.lock, flags);
+
+	if (buffer_n == 0) {
+		reg = idmac_read_ipureg(&ipu_data, IPU_CHA_BUF0_RDY);
+		if (reg & (1UL << channel)) {
+			spin_unlock_irqrestore(&ipu_data.lock, flags);
+			return -EACCES;
+		}
+
+		/* 44.3.3.1.9 - Row Number 1 (WORD1, offset 0) */
+		idmac_write_ipureg(&ipu_data, dma_param_addr(channel) +
+				   0x0008UL, IPU_IMA_ADDR);
+		idmac_write_ipureg(&ipu_data, phyaddr, IPU_IMA_DATA);
+	} else {
+		reg = idmac_read_ipureg(&ipu_data, IPU_CHA_BUF1_RDY);
+		if (reg & (1UL << channel)) {
+			spin_unlock_irqrestore(&ipu_data.lock, flags);
+			return -EACCES;
+		}
+
+		/* Check if double-buffering is already enabled */
+		reg = idmac_read_ipureg(&ipu_data, IPU_CHA_DB_MODE_SEL);
+
+		if (!(reg & (1UL << channel)))
+			idmac_write_ipureg(&ipu_data, reg | (1UL << channel),
+					   IPU_CHA_DB_MODE_SEL);
+
+		/* 44.3.3.1.9 - Row Number 1 (WORD1, offset 1) */
+		idmac_write_ipureg(&ipu_data, dma_param_addr(channel) +
+				   0x0009UL, IPU_IMA_ADDR);
+		idmac_write_ipureg(&ipu_data, phyaddr, IPU_IMA_DATA);
+	}
+
+	spin_unlock_irqrestore(&ipu_data.lock, flags);
+
+	return 0;
+}
+
+/* Called under spin_lock_irqsave(&ichan->lock) */
+static int ipu_submit_channel_buffers(struct idmac_channel *ichan,
+				      struct idmac_tx_desc *desc)
+{
+	struct scatterlist *sg;
+	int i, ret = 0;
+
+	for (i = 0, sg = desc->sg; i < 2 && sg; i++) {
+		if (!ichan->sg[i]) {
+			ichan->sg[i] = sg;
+
+			/*
+			 * On first invocation this shouldn't be necessary, the
+			 * call to ipu_init_channel_buffer() above will set
+			 * addresses for us, so we could make it conditional
+			 * on status >= IPU_CHANNEL_ENABLED, but doing it again
+			 * shouldn't hurt either.
+			 */
+			ret = ipu_update_channel_buffer(ichan->dma_chan.chan_id, i,
+							sg_dma_address(sg));
+			if (ret < 0)
+				return ret;
+
+			ipu_select_buffer(ichan->dma_chan.chan_id, i);
+
+			sg = sg_next(sg);
+		}
+	}
+
+	return ret;
+}
+
+static dma_cookie_t idmac_tx_submit(struct dma_async_tx_descriptor *tx)
+{
+	struct idmac_tx_desc *desc = to_tx_desc(tx);
+	struct idmac_channel *ichan = to_idmac_chan(tx->chan);
+	struct idmac *idmac = to_idmac(tx->chan->device);
+	struct ipu *ipu = to_ipu(idmac);
+	dma_cookie_t cookie;
+	unsigned long flags;
+
+	/* Sanity check */
+	if (!list_empty(&desc->list)) {
+		/* The descriptor doesn't belong to client */
+		dev_err(&ichan->dma_chan.dev->device,
+			"Descriptor %p not prepared!\n", tx);
+		return -EBUSY;
+	}
+
+	mutex_lock(&ichan->chan_mutex);
+
+	if (ichan->status < IPU_CHANNEL_READY) {
+		struct idmac_video_param *video = &ichan->params.video;
+		/*
+		 * Initial buffer assignment - the first two sg-entries from
+		 * the descriptor will end up in the IDMAC buffers
+		 */
+		dma_addr_t dma_1 = sg_is_last(desc->sg) ? 0 :
+			sg_dma_address(&desc->sg[1]);
+
+		WARN_ON(ichan->sg[0] || ichan->sg[1]);
+
+		cookie = ipu_init_channel_buffer(ichan,
+						 video->out_pixel_fmt,
+						 video->out_width,
+						 video->out_height,
+						 video->out_stride,
+						 IPU_ROTATE_NONE,
+						 sg_dma_address(&desc->sg[0]),
+						 dma_1);
+		if (cookie < 0)
+			goto out;
+	}
+
+	/* ipu->lock can be taken under ichan->lock, but not v.v. */
+	spin_lock_irqsave(&ichan->lock, flags);
+
+	/* submit_buffers() atomically verifies and fills empty sg slots */
+	cookie = ipu_submit_channel_buffers(ichan, desc);
+
+	spin_unlock_irqrestore(&ichan->lock, flags);
+
+	if (cookie < 0)
+		goto out;
+
+	cookie = ichan->dma_chan.cookie;
+
+	if (++cookie < 0)
+		cookie = 1;
+
+	/* from dmaengine.h: "last cookie value returned to client" */
+	ichan->dma_chan.cookie = cookie;
+	tx->cookie = cookie;
+	spin_lock_irqsave(&ichan->lock, flags);
+	list_add_tail(&desc->list, &ichan->queue);
+	spin_unlock_irqrestore(&ichan->lock, flags);
+
+	if (ichan->status < IPU_CHANNEL_ENABLED) {
+		int ret = ipu_enable_channel(idmac, ichan);
+		if (ret < 0) {
+			cookie = ret;
+			spin_lock_irqsave(&ichan->lock, flags);
+			list_del_init(&desc->list);
+			spin_unlock_irqrestore(&ichan->lock, flags);
+			tx->cookie = cookie;
+			ichan->dma_chan.cookie = cookie;
+		}
+	}
+
+	dump_idmac_reg(ipu);
+
+out:
+	mutex_unlock(&ichan->chan_mutex);
+
+	return cookie;
+}
+
+/* Called with ichan->chan_mutex held */
+static int idmac_desc_alloc(struct idmac_channel *ichan, int n)
+{
+	struct idmac_tx_desc *desc = vmalloc(n * sizeof(struct idmac_tx_desc));
+	struct idmac *idmac = to_idmac(ichan->dma_chan.device);
+
+	if (!desc)
+		return -ENOMEM;
+
+	/* No interrupts, just disable the tasklet for a moment */
+	tasklet_disable(&to_ipu(idmac)->tasklet);
+
+	ichan->n_tx_desc = n;
+	ichan->desc = desc;
+	INIT_LIST_HEAD(&ichan->queue);
+	INIT_LIST_HEAD(&ichan->free_list);
+
+	while (n--) {
+		struct dma_async_tx_descriptor *txd = &desc->txd;
+
+		memset(txd, 0, sizeof(*txd));
+		dma_async_tx_descriptor_init(txd, &ichan->dma_chan);
+		txd->tx_submit		= idmac_tx_submit;
+		txd->chan		= &ichan->dma_chan;
+		INIT_LIST_HEAD(&txd->tx_list);
+
+		list_add(&desc->list, &ichan->free_list);
+
+		desc++;
+	}
+
+	tasklet_enable(&to_ipu(idmac)->tasklet);
+
+	return 0;
+}
+
+/**
+ * ipu_init_channel() - initialize an IPU channel.
+ * @idmac:	IPU DMAC context.
+ * @ichan:	pointer to the channel object.
+ * @return      0 on success or negative error code on failure.
+ */
+static int ipu_init_channel(struct idmac *idmac, struct idmac_channel *ichan)
+{
+	union ipu_channel_param *params = &ichan->params;
+	uint32_t ipu_conf;
+	enum ipu_channel channel = ichan->dma_chan.chan_id;
+	unsigned long flags;
+	uint32_t reg;
+	struct ipu *ipu = to_ipu(idmac);
+	int ret = 0, n_desc = 0;
+
+	dev_dbg(ipu->dev, "init channel = %d\n", channel);
+
+	if (channel != IDMAC_SDC_0 && channel != IDMAC_SDC_1 &&
+	    channel != IDMAC_IC_7)
+		return -EINVAL;
+
+	spin_lock_irqsave(&ipu->lock, flags);
+
+	switch (channel) {
+	case IDMAC_IC_7:
+		n_desc = 16;
+		reg = idmac_read_icreg(ipu, IC_CONF);
+		idmac_write_icreg(ipu, reg & ~IC_CONF_CSI_MEM_WR_EN, IC_CONF);
+		break;
+	case IDMAC_IC_0:
+		n_desc = 16;
+		reg = idmac_read_ipureg(ipu, IPU_FS_PROC_FLOW);
+		idmac_write_ipureg(ipu, reg & ~FS_ENC_IN_VALID, IPU_FS_PROC_FLOW);
+		ret = ipu_ic_init_prpenc(ipu, params, true);
+		break;
+	case IDMAC_SDC_0:
+	case IDMAC_SDC_1:
+		n_desc = 4;
+	default:
+		break;
+	}
+
+	ipu->channel_init_mask |= 1L << channel;
+
+	/* Enable IPU sub module */
+	ipu_conf = idmac_read_ipureg(ipu, IPU_CONF) |
+		ipu_channel_conf_mask(channel);
+	idmac_write_ipureg(ipu, ipu_conf, IPU_CONF);
+
+	spin_unlock_irqrestore(&ipu->lock, flags);
+
+	if (n_desc && !ichan->desc)
+		ret = idmac_desc_alloc(ichan, n_desc);
+
+	dump_idmac_reg(ipu);
+
+	return ret;
+}
+
+/**
+ * ipu_uninit_channel() - uninitialize an IPU channel.
+ * @idmac:	IPU DMAC context.
+ * @ichan:	pointer to the channel object.
+ */
+static void ipu_uninit_channel(struct idmac *idmac, struct idmac_channel *ichan)
+{
+	enum ipu_channel channel = ichan->dma_chan.chan_id;
+	unsigned long flags;
+	uint32_t reg;
+	unsigned long chan_mask = 1UL << channel;
+	uint32_t ipu_conf;
+	struct ipu *ipu = to_ipu(idmac);
+
+	spin_lock_irqsave(&ipu->lock, flags);
+
+	if (!(ipu->channel_init_mask & chan_mask)) {
+		dev_err(ipu->dev, "Channel already uninitialized %d\n",
+			channel);
+		spin_unlock_irqrestore(&ipu->lock, flags);
+		return;
+	}
+
+	/* Reset the double buffer */
+	reg = idmac_read_ipureg(ipu, IPU_CHA_DB_MODE_SEL);
+	idmac_write_ipureg(ipu, reg & ~chan_mask, IPU_CHA_DB_MODE_SEL);
+
+	ichan->sec_chan_en = false;
+
+	switch (channel) {
+	case IDMAC_IC_7:
+		reg = idmac_read_icreg(ipu, IC_CONF);
+		idmac_write_icreg(ipu, reg & ~(IC_CONF_RWS_EN | IC_CONF_PRPENC_EN),
+			     IC_CONF);
+		break;
+	case IDMAC_IC_0:
+		reg = idmac_read_icreg(ipu, IC_CONF);
+		idmac_write_icreg(ipu, reg & ~(IC_CONF_PRPENC_EN | IC_CONF_PRPENC_CSC1),
+				  IC_CONF);
+		break;
+	case IDMAC_SDC_0:
+	case IDMAC_SDC_1:
+	default:
+		break;
+	}
+
+	ipu->channel_init_mask &= ~(1L << channel);
+
+	ipu_conf = idmac_read_ipureg(ipu, IPU_CONF) &
+		~ipu_channel_conf_mask(channel);
+	idmac_write_ipureg(ipu, ipu_conf, IPU_CONF);
+
+	spin_unlock_irqrestore(&ipu->lock, flags);
+
+	ichan->n_tx_desc = 0;
+	vfree(ichan->desc);
+	ichan->desc = NULL;
+}
+
+/**
+ * ipu_disable_channel() - disable an IPU channel.
+ * @idmac:		IPU DMAC context.
+ * @ichan:		channel object pointer.
+ * @wait_for_stop:	flag to set whether to wait for channel end of frame or
+ *			return immediately.
+ * @return:		0 on success or negative error code on failure.
+ */
+static int ipu_disable_channel(struct idmac *idmac, struct idmac_channel *ichan,
+			       bool wait_for_stop)
+{
+	enum ipu_channel channel = ichan->dma_chan.chan_id;
+	struct ipu *ipu = to_ipu(idmac);
+	uint32_t reg;
+	unsigned long flags;
+	unsigned long chan_mask = 1UL << channel;
+	unsigned int timeout;
+
+	if (wait_for_stop && channel != IDMAC_SDC_1 && channel != IDMAC_SDC_0) {
+		timeout = 40;
+		/* This waiting always fails. Related to spurious irq problem */
+		while ((idmac_read_icreg(ipu, IDMAC_CHA_BUSY) & chan_mask) ||
+		       (ipu_channel_status(ipu, channel) == TASK_STAT_ACTIVE)) {
+			timeout--;
+			msleep(10);
+
+			if (!timeout) {
+				dev_dbg(ipu->dev,
+					"Warning: timeout waiting for channel %u to "
+					"stop: buf0_rdy = 0x%08X, buf1_rdy = 0x%08X, "
+					"busy = 0x%08X, tstat = 0x%08X\n", channel,
+					idmac_read_ipureg(ipu, IPU_CHA_BUF0_RDY),
+					idmac_read_ipureg(ipu, IPU_CHA_BUF1_RDY),
+					idmac_read_icreg(ipu, IDMAC_CHA_BUSY),
+					idmac_read_ipureg(ipu, IPU_TASKS_STAT));
+				break;
+			}
+		}
+		dev_dbg(ipu->dev, "timeout = %d * 10ms\n", 40 - timeout);
+	}
+	/* SDC BG and FG must be disabled before DMA is disabled */
+	if (wait_for_stop && (channel == IDMAC_SDC_0 ||
+			      channel == IDMAC_SDC_1)) {
+		for (timeout = 5;
+		     timeout && !ipu_irq_status(ichan->eof_irq); timeout--)
+			msleep(5);
+	}
+
+	spin_lock_irqsave(&ipu->lock, flags);
+
+	/* Disable IC task */
+	ipu_ic_disable_task(ipu, channel);
+
+	/* Disable DMA channel(s) */
+	reg = idmac_read_icreg(ipu, IDMAC_CHA_EN);
+	idmac_write_icreg(ipu, reg & ~chan_mask, IDMAC_CHA_EN);
+
+	/*
+	 * Problem (observed with channel DMAIC_7): after enabling the channel
+	 * and initialising buffers, there comes an interrupt with current still
+	 * pointing at buffer 0, whereas it should use buffer 0 first and only
+	 * generate an interrupt when it is done, then current should already
+	 * point to buffer 1. This spurious interrupt also comes on channel
+	 * DMASDC_0. With DMAIC_7 normally, is we just leave the ISR after the
+	 * first interrupt, there comes the second with current correctly
+	 * pointing to buffer 1 this time. But sometimes this second interrupt
+	 * doesn't come and the channel hangs. Clearing BUFx_RDY when disabling
+	 * the channel seems to prevent the channel from hanging, but it doesn't
+	 * prevent the spurious interrupt. This might also be unsafe. Think
+	 * about the IDMAC controller trying to switch to a buffer, when we
+	 * clear the ready bit, and re-enable it a moment later.
+	 */
+	reg = idmac_read_ipureg(ipu, IPU_CHA_BUF0_RDY);
+	idmac_write_ipureg(ipu, 0, IPU_CHA_BUF0_RDY);
+	idmac_write_ipureg(ipu, reg & ~(1UL << channel), IPU_CHA_BUF0_RDY);
+
+	reg = idmac_read_ipureg(ipu, IPU_CHA_BUF1_RDY);
+	idmac_write_ipureg(ipu, 0, IPU_CHA_BUF1_RDY);
+	idmac_write_ipureg(ipu, reg & ~(1UL << channel), IPU_CHA_BUF1_RDY);
+
+	spin_unlock_irqrestore(&ipu->lock, flags);
+
+	return 0;
+}
+
+/*
+ * We have several possibilities here:
+ * current BUF		next BUF
+ *
+ * not last sg		next not last sg
+ * not last sg		next last sg
+ * last sg		first sg from next descriptor
+ * last sg		NULL
+ *
+ * Besides, the descriptor queue might be empty or not. We process all these
+ * cases carefully.
+ */
+static irqreturn_t idmac_interrupt(int irq, void *dev_id)
+{
+	struct idmac_channel *ichan = dev_id;
+	unsigned int chan_id = ichan->dma_chan.chan_id;
+	struct scatterlist **sg, *sgnext, *sgnew = NULL;
+	/* Next transfer descriptor */
+	struct idmac_tx_desc *desc = NULL, *descnew;
+	dma_async_tx_callback callback;
+	void *callback_param;
+	bool done = false;
+	u32	ready0 = idmac_read_ipureg(&ipu_data, IPU_CHA_BUF0_RDY),
+		ready1 = idmac_read_ipureg(&ipu_data, IPU_CHA_BUF1_RDY),
+		curbuf = idmac_read_ipureg(&ipu_data, IPU_CHA_CUR_BUF);
+
+	/* IDMAC has cleared the respective BUFx_RDY bit, we manage the buffer */
+
+	pr_debug("IDMAC irq %d\n", irq);
+	/* Other interrupts do not interfere with this channel */
+	spin_lock(&ichan->lock);
+
+	if (unlikely(chan_id != IDMAC_SDC_0 && chan_id != IDMAC_SDC_1 &&
+		     ((curbuf >> chan_id) & 1) == ichan->active_buffer)) {
+		int i = 100;
+
+		/* This doesn't help. See comment in ipu_disable_channel() */
+		while (--i) {
+			curbuf = idmac_read_ipureg(&ipu_data, IPU_CHA_CUR_BUF);
+			if (((curbuf >> chan_id) & 1) != ichan->active_buffer)
+				break;
+			cpu_relax();
+		}
+
+		if (!i) {
+			spin_unlock(&ichan->lock);
+			dev_dbg(ichan->dma_chan.device->dev,
+				"IRQ on active buffer on channel %x, active "
+				"%d, ready %x, %x, current %x!\n", chan_id,
+				ichan->active_buffer, ready0, ready1, curbuf);
+			return IRQ_NONE;
+		}
+	}
+
+	if (unlikely((ichan->active_buffer && (ready1 >> chan_id) & 1) ||
+		     (!ichan->active_buffer && (ready0 >> chan_id) & 1)
+		     )) {
+		spin_unlock(&ichan->lock);
+		dev_dbg(ichan->dma_chan.device->dev,
+			"IRQ with active buffer still ready on channel %x, "
+			"active %d, ready %x, %x!\n", chan_id,
+			ichan->active_buffer, ready0, ready1);
+		return IRQ_NONE;
+	}
+
+	if (unlikely(list_empty(&ichan->queue))) {
+		spin_unlock(&ichan->lock);
+		dev_err(ichan->dma_chan.device->dev,
+			"IRQ without queued buffers on channel %x, active %d, "
+			"ready %x, %x!\n", chan_id,
+			ichan->active_buffer, ready0, ready1);
+		return IRQ_NONE;
+	}
+
+	/*
+	 * active_buffer is a software flag, it shows which buffer we are
+	 * currently expecting back from the hardware, IDMAC should be
+	 * processing the other buffer already
+	 */
+	sg = &ichan->sg[ichan->active_buffer];
+	sgnext = ichan->sg[!ichan->active_buffer];
+
+	/*
+	 * if sgnext == NULL sg must be the last element in a scatterlist and
+	 * queue must be empty
+	 */
+	if (unlikely(!sgnext)) {
+		if (unlikely(sg_next(*sg))) {
+			dev_err(ichan->dma_chan.device->dev,
+				"Broken buffer-update locking on channel %x!\n",
+				chan_id);
+			/* We'll let the user catch up */
+		} else {
+			/* Underrun */
+			ipu_ic_disable_task(&ipu_data, chan_id);
+			dev_dbg(ichan->dma_chan.device->dev,
+				"Underrun on channel %x\n", chan_id);
+			ichan->status = IPU_CHANNEL_READY;
+			/* Continue to check for complete descriptor */
+		}
+	}
+
+	desc = list_entry(ichan->queue.next, struct idmac_tx_desc, list);
+
+	/* First calculate and submit the next sg element */
+	if (likely(sgnext))
+		sgnew = sg_next(sgnext);
+
+	if (unlikely(!sgnew)) {
+		/* Start a new scatterlist, if any queued */
+		if (likely(desc->list.next != &ichan->queue)) {
+			descnew = list_entry(desc->list.next,
+					     struct idmac_tx_desc, list);
+			sgnew = &descnew->sg[0];
+		}
+	}
+
+	if (unlikely(!sg_next(*sg)) || !sgnext) {
+		/*
+		 * Last element in scatterlist done, remove from the queue,
+		 * _init for debugging
+		 */
+		list_del_init(&desc->list);
+		done = true;
+	}
+
+	*sg = sgnew;
+
+	if (likely(sgnew)) {
+		int ret;
+
+		ret = ipu_update_channel_buffer(chan_id, ichan->active_buffer,
+						sg_dma_address(*sg));
+		if (ret < 0)
+			dev_err(ichan->dma_chan.device->dev,
+				"Failed to update buffer on channel %x buffer %d!\n",
+				chan_id, ichan->active_buffer);
+		else
+			ipu_select_buffer(chan_id, ichan->active_buffer);
+	}
+
+	/* Flip the active buffer - even if update above failed */
+	ichan->active_buffer = !ichan->active_buffer;
+	if (done)
+		ichan->completed = desc->txd.cookie;
+
+	callback = desc->txd.callback;
+	callback_param = desc->txd.callback_param;
+
+	spin_unlock(&ichan->lock);
+
+	if (done && (desc->txd.flags & DMA_PREP_INTERRUPT) && callback)
+		callback(callback_param);
+
+	return IRQ_HANDLED;
+}
+
+static void ipu_gc_tasklet(unsigned long arg)
+{
+	struct ipu *ipu = (struct ipu *)arg;
+	int i;
+
+	for (i = 0; i < IPU_CHANNELS_NUM; i++) {
+		struct idmac_channel *ichan = ipu->channel + i;
+		struct idmac_tx_desc *desc;
+		unsigned long flags;
+		int j;
+
+		for (j = 0; j < ichan->n_tx_desc; j++) {
+			desc = ichan->desc + j;
+			spin_lock_irqsave(&ichan->lock, flags);
+			if (async_tx_test_ack(&desc->txd)) {
+				list_move(&desc->list, &ichan->free_list);
+				async_tx_clear_ack(&desc->txd);
+			}
+			spin_unlock_irqrestore(&ichan->lock, flags);
+		}
+	}
+}
+
+/*
+ * At the time .device_alloc_chan_resources() method is called, we cannot know,
+ * whether the client will accept the channel. Thus we must only check, if we
+ * can satisfy client's request but the only real criterion to verify, whether
+ * the client has accepted our offer is the client_count. That's why we have to
+ * perform the rest of our allocation tasks on the first call to this function.
+ */
+static struct dma_async_tx_descriptor *idmac_prep_slave_sg(struct dma_chan *chan,
+		struct scatterlist *sgl, unsigned int sg_len,
+		enum dma_data_direction direction, unsigned long tx_flags)
+{
+	struct idmac_channel *ichan = to_idmac_chan(chan);
+	struct idmac_tx_desc *desc = NULL;
+	struct dma_async_tx_descriptor *txd = NULL;
+	unsigned long flags;
+
+	/* We only can handle these three channels so far */
+	if (ichan->dma_chan.chan_id != IDMAC_SDC_0 && ichan->dma_chan.chan_id != IDMAC_SDC_1 &&
+	    ichan->dma_chan.chan_id != IDMAC_IC_7)
+		return NULL;
+
+	if (direction != DMA_FROM_DEVICE && direction != DMA_TO_DEVICE) {
+		dev_err(chan->device->dev, "Invalid DMA direction %d!\n", direction);
+		return NULL;
+	}
+
+	mutex_lock(&ichan->chan_mutex);
+
+	spin_lock_irqsave(&ichan->lock, flags);
+	if (!list_empty(&ichan->free_list)) {
+		desc = list_entry(ichan->free_list.next,
+				  struct idmac_tx_desc, list);
+
+		list_del_init(&desc->list);
+
+		desc->sg_len	= sg_len;
+		desc->sg	= sgl;
+		txd		= &desc->txd;
+		txd->flags	= tx_flags;
+	}
+	spin_unlock_irqrestore(&ichan->lock, flags);
+
+	mutex_unlock(&ichan->chan_mutex);
+
+	tasklet_schedule(&to_ipu(to_idmac(chan->device))->tasklet);
+
+	return txd;
+}
+
+/* Re-select the current buffer and re-activate the channel */
+static void idmac_issue_pending(struct dma_chan *chan)
+{
+	struct idmac_channel *ichan = to_idmac_chan(chan);
+	struct idmac *idmac = to_idmac(chan->device);
+	struct ipu *ipu = to_ipu(idmac);
+	unsigned long flags;
+
+	/* This is not always needed, but doesn't hurt either */
+	spin_lock_irqsave(&ipu->lock, flags);
+	ipu_select_buffer(ichan->dma_chan.chan_id, ichan->active_buffer);
+	spin_unlock_irqrestore(&ipu->lock, flags);
+
+	/*
+	 * Might need to perform some parts of initialisation from
+	 * ipu_enable_channel(), but not all, we do not want to reset to buffer
+	 * 0, don't need to set priority again either, but re-enabling the task
+	 * and the channel might be a good idea.
+	 */
+}
+
+static void __idmac_terminate_all(struct dma_chan *chan)
+{
+	struct idmac_channel *ichan = to_idmac_chan(chan);
+	struct idmac *idmac = to_idmac(chan->device);
+	unsigned long flags;
+	int i;
+
+	ipu_disable_channel(idmac, ichan,
+			    ichan->status >= IPU_CHANNEL_ENABLED);
+
+	tasklet_disable(&to_ipu(idmac)->tasklet);
+
+	/* ichan->queue is modified in ISR, have to spinlock */
+	spin_lock_irqsave(&ichan->lock, flags);
+	list_splice_init(&ichan->queue, &ichan->free_list);
+
+	if (ichan->desc)
+		for (i = 0; i < ichan->n_tx_desc; i++) {
+			struct idmac_tx_desc *desc = ichan->desc + i;
+			if (list_empty(&desc->list))
+				/* Descriptor was prepared, but not submitted */
+				list_add(&desc->list,
+					 &ichan->free_list);
+
+			async_tx_clear_ack(&desc->txd);
+		}
+
+	ichan->sg[0] = NULL;
+	ichan->sg[1] = NULL;
+	spin_unlock_irqrestore(&ichan->lock, flags);
+
+	tasklet_enable(&to_ipu(idmac)->tasklet);
+
+	ichan->status = IPU_CHANNEL_INITIALIZED;
+}
+
+static void idmac_terminate_all(struct dma_chan *chan)
+{
+	struct idmac_channel *ichan = to_idmac_chan(chan);
+
+	mutex_lock(&ichan->chan_mutex);
+
+	__idmac_terminate_all(chan);
+
+	mutex_unlock(&ichan->chan_mutex);
+}
+
+static int idmac_alloc_chan_resources(struct dma_chan *chan)
+{
+	struct idmac_channel *ichan = to_idmac_chan(chan);
+	struct idmac *idmac = to_idmac(chan->device);
+	int ret;
+
+	/* dmaengine.c now guarantees to only offer free channels */
+	BUG_ON(chan->client_count > 1);
+	WARN_ON(ichan->status != IPU_CHANNEL_FREE);
+
+	chan->cookie		= 1;
+	ichan->completed	= -ENXIO;
+
+	ret = ipu_irq_map(ichan->dma_chan.chan_id);
+	if (ret < 0)
+		goto eimap;
+
+	ichan->eof_irq = ret;
+	ret = request_irq(ichan->eof_irq, idmac_interrupt, 0,
+			  ichan->eof_name, ichan);
+	if (ret < 0)
+		goto erirq;
+
+	ret = ipu_init_channel(idmac, ichan);
+	if (ret < 0)
+		goto eichan;
+
+	ichan->status = IPU_CHANNEL_INITIALIZED;
+
+	dev_dbg(&ichan->dma_chan.dev->device, "Found channel 0x%x, irq %d\n",
+		ichan->dma_chan.chan_id, ichan->eof_irq);
+
+	return ret;
+
+eichan:
+	free_irq(ichan->eof_irq, ichan);
+erirq:
+	ipu_irq_unmap(ichan->dma_chan.chan_id);
+eimap:
+	return ret;
+}
+
+static void idmac_free_chan_resources(struct dma_chan *chan)
+{
+	struct idmac_channel *ichan = to_idmac_chan(chan);
+	struct idmac *idmac = to_idmac(chan->device);
+
+	mutex_lock(&ichan->chan_mutex);
+
+	__idmac_terminate_all(chan);
+
+	if (ichan->status > IPU_CHANNEL_FREE) {
+		free_irq(ichan->eof_irq, ichan);
+		ipu_irq_unmap(ichan->dma_chan.chan_id);
+	}
+
+	ichan->status = IPU_CHANNEL_FREE;
+
+	ipu_uninit_channel(idmac, ichan);
+
+	mutex_unlock(&ichan->chan_mutex);
+
+	tasklet_schedule(&to_ipu(idmac)->tasklet);
+}
+
+static enum dma_status idmac_is_tx_complete(struct dma_chan *chan,
+		dma_cookie_t cookie, dma_cookie_t *done, dma_cookie_t *used)
+{
+	struct idmac_channel *ichan = to_idmac_chan(chan);
+
+	if (done)
+		*done = ichan->completed;
+	if (used)
+		*used = chan->cookie;
+	if (cookie != chan->cookie)
+		return DMA_ERROR;
+	return DMA_SUCCESS;
+}
+
+static int __init ipu_idmac_init(struct ipu *ipu)
+{
+	struct idmac *idmac = &ipu->idmac;
+	struct dma_device *dma = &idmac->dma;
+	int i;
+
+	dma_cap_set(DMA_SLAVE, dma->cap_mask);
+	dma_cap_set(DMA_PRIVATE, dma->cap_mask);
+
+	/* Compulsory common fields */
+	dma->dev				= ipu->dev;
+	dma->device_alloc_chan_resources	= idmac_alloc_chan_resources;
+	dma->device_free_chan_resources		= idmac_free_chan_resources;
+	dma->device_is_tx_complete		= idmac_is_tx_complete;
+	dma->device_issue_pending		= idmac_issue_pending;
+
+	/* Compulsory for DMA_SLAVE fields */
+	dma->device_prep_slave_sg		= idmac_prep_slave_sg;
+	dma->device_terminate_all		= idmac_terminate_all;
+
+	INIT_LIST_HEAD(&dma->channels);
+	for (i = 0; i < IPU_CHANNELS_NUM; i++) {
+		struct idmac_channel *ichan = ipu->channel + i;
+		struct dma_chan *dma_chan = &ichan->dma_chan;
+
+		spin_lock_init(&ichan->lock);
+		mutex_init(&ichan->chan_mutex);
+
+		ichan->status		= IPU_CHANNEL_FREE;
+		ichan->sec_chan_en	= false;
+		ichan->completed	= -ENXIO;
+		snprintf(ichan->eof_name, sizeof(ichan->eof_name), "IDMAC EOF %d", i);
+
+		dma_chan->device	= &idmac->dma;
+		dma_chan->cookie	= 1;
+		dma_chan->chan_id	= i;
+		list_add_tail(&ichan->dma_chan.device_node, &dma->channels);
+	}
+
+	idmac_write_icreg(ipu, 0x00000070, IDMAC_CONF);
+
+	return dma_async_device_register(&idmac->dma);
+}
+
+static void ipu_idmac_exit(struct ipu *ipu)
+{
+	int i;
+	struct idmac *idmac = &ipu->idmac;
+
+	for (i = 0; i < IPU_CHANNELS_NUM; i++) {
+		struct idmac_channel *ichan = ipu->channel + i;
+
+		idmac_terminate_all(&ichan->dma_chan);
+		idmac_prep_slave_sg(&ichan->dma_chan, NULL, 0, DMA_NONE, 0);
+	}
+
+	dma_async_device_unregister(&idmac->dma);
+}
+
+/*****************************************************************************
+ * IPU common probe / remove
+ */
+
+static int ipu_probe(struct platform_device *pdev)
+{
+	struct ipu_platform_data *pdata = pdev->dev.platform_data;
+	struct resource *mem_ipu, *mem_ic;
+	int ret;
+
+	spin_lock_init(&ipu_data.lock);
+
+	mem_ipu	= platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	mem_ic	= platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!pdata || !mem_ipu || !mem_ic)
+		return -EINVAL;
+
+	ipu_data.dev = &pdev->dev;
+
+	platform_set_drvdata(pdev, &ipu_data);
+
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0)
+		goto err_noirq;
+
+	ipu_data.irq_fn = ret;
+	ret = platform_get_irq(pdev, 1);
+	if (ret < 0)
+		goto err_noirq;
+
+	ipu_data.irq_err = ret;
+	ipu_data.irq_base = pdata->irq_base;
+
+	dev_dbg(&pdev->dev, "fn irq %u, err irq %u, irq-base %u\n",
+		ipu_data.irq_fn, ipu_data.irq_err, ipu_data.irq_base);
+
+	/* Remap IPU common registers */
+	ipu_data.reg_ipu = ioremap(mem_ipu->start,
+				   mem_ipu->end - mem_ipu->start + 1);
+	if (!ipu_data.reg_ipu) {
+		ret = -ENOMEM;
+		goto err_ioremap_ipu;
+	}
+
+	/* Remap Image Converter and Image DMA Controller registers */
+	ipu_data.reg_ic = ioremap(mem_ic->start,
+				  mem_ic->end - mem_ic->start + 1);
+	if (!ipu_data.reg_ic) {
+		ret = -ENOMEM;
+		goto err_ioremap_ic;
+	}
+
+	/* Get IPU clock */
+	ipu_data.ipu_clk = clk_get(&pdev->dev, "ipu_clk");
+	if (IS_ERR(ipu_data.ipu_clk)) {
+		ret = PTR_ERR(ipu_data.ipu_clk);
+		goto err_clk_get;
+	}
+
+	/* Make sure IPU HSP clock is running */
+	clk_enable(ipu_data.ipu_clk);
+
+	/* Disable all interrupts */
+	idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_1);
+	idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_2);
+	idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_3);
+	idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_4);
+	idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_5);
+
+	dev_dbg(&pdev->dev, "%s @ 0x%08lx, fn irq %u, err irq %u\n", pdev->name,
+		(unsigned long)mem_ipu->start, ipu_data.irq_fn, ipu_data.irq_err);
+
+	ret = ipu_irq_attach_irq(&ipu_data, pdev);
+	if (ret < 0)
+		goto err_attach_irq;
+
+	/* Initialize DMA engine */
+	ret = ipu_idmac_init(&ipu_data);
+	if (ret < 0)
+		goto err_idmac_init;
+
+	tasklet_init(&ipu_data.tasklet, ipu_gc_tasklet, (unsigned long)&ipu_data);
+
+	ipu_data.dev = &pdev->dev;
+
+	dev_dbg(ipu_data.dev, "IPU initialized\n");
+
+	return 0;
+
+err_idmac_init:
+err_attach_irq:
+	ipu_irq_detach_irq(&ipu_data, pdev);
+	clk_disable(ipu_data.ipu_clk);
+	clk_put(ipu_data.ipu_clk);
+err_clk_get:
+	iounmap(ipu_data.reg_ic);
+err_ioremap_ic:
+	iounmap(ipu_data.reg_ipu);
+err_ioremap_ipu:
+err_noirq:
+	dev_err(&pdev->dev, "Failed to probe IPU: %d\n", ret);
+	return ret;
+}
+
+static int ipu_remove(struct platform_device *pdev)
+{
+	struct ipu *ipu = platform_get_drvdata(pdev);
+
+	ipu_idmac_exit(ipu);
+	ipu_irq_detach_irq(ipu, pdev);
+	clk_disable(ipu->ipu_clk);
+	clk_put(ipu->ipu_clk);
+	iounmap(ipu->reg_ic);
+	iounmap(ipu->reg_ipu);
+	tasklet_kill(&ipu->tasklet);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+/*
+ * We need two MEM resources - with IPU-common and Image Converter registers,
+ * including PF_CONF and IDMAC_* registers, and two IRQs - function and error
+ */
+static struct platform_driver ipu_platform_driver = {
+	.driver = {
+		.name	= "ipu-core",
+		.owner	= THIS_MODULE,
+	},
+	.remove		= ipu_remove,
+};
+
+static int __init ipu_init(void)
+{
+	return platform_driver_probe(&ipu_platform_driver, ipu_probe);
+}
+subsys_initcall(ipu_init);
+
+MODULE_DESCRIPTION("IPU core driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Guennadi Liakhovetski <lg@denx.de>");
+MODULE_ALIAS("platform:ipu-core");
diff --git a/drivers/dma/ipu/ipu_intern.h b/drivers/dma/ipu/ipu_intern.h
new file mode 100644
index 0000000..545cf11
--- /dev/null
+++ b/drivers/dma/ipu/ipu_intern.h
@@ -0,0 +1,176 @@
+/*
+ * Copyright (C) 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * Copyright (C) 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _IPU_INTERN_H_
+#define _IPU_INTERN_H_
+
+#include <linux/dmaengine.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+
+/* IPU Common registers */
+#define IPU_CONF		0x00
+#define IPU_CHA_BUF0_RDY	0x04
+#define IPU_CHA_BUF1_RDY	0x08
+#define IPU_CHA_DB_MODE_SEL	0x0C
+#define IPU_CHA_CUR_BUF		0x10
+#define IPU_FS_PROC_FLOW	0x14
+#define IPU_FS_DISP_FLOW	0x18
+#define IPU_TASKS_STAT		0x1C
+#define IPU_IMA_ADDR		0x20
+#define IPU_IMA_DATA		0x24
+#define IPU_INT_CTRL_1		0x28
+#define IPU_INT_CTRL_2		0x2C
+#define IPU_INT_CTRL_3		0x30
+#define IPU_INT_CTRL_4		0x34
+#define IPU_INT_CTRL_5		0x38
+#define IPU_INT_STAT_1		0x3C
+#define IPU_INT_STAT_2		0x40
+#define IPU_INT_STAT_3		0x44
+#define IPU_INT_STAT_4		0x48
+#define IPU_INT_STAT_5		0x4C
+#define IPU_BRK_CTRL_1		0x50
+#define IPU_BRK_CTRL_2		0x54
+#define IPU_BRK_STAT		0x58
+#define IPU_DIAGB_CTRL		0x5C
+
+/* IPU_CONF Register bits */
+#define IPU_CONF_CSI_EN		0x00000001
+#define IPU_CONF_IC_EN		0x00000002
+#define IPU_CONF_ROT_EN		0x00000004
+#define IPU_CONF_PF_EN		0x00000008
+#define IPU_CONF_SDC_EN		0x00000010
+#define IPU_CONF_ADC_EN		0x00000020
+#define IPU_CONF_DI_EN		0x00000040
+#define IPU_CONF_DU_EN		0x00000080
+#define IPU_CONF_PXL_ENDIAN	0x00000100
+
+/* Image Converter Registers */
+#define IC_CONF			0x88
+#define IC_PRP_ENC_RSC		0x8C
+#define IC_PRP_VF_RSC		0x90
+#define IC_PP_RSC		0x94
+#define IC_CMBP_1		0x98
+#define IC_CMBP_2		0x9C
+#define PF_CONF			0xA0
+#define IDMAC_CONF		0xA4
+#define IDMAC_CHA_EN		0xA8
+#define IDMAC_CHA_PRI		0xAC
+#define IDMAC_CHA_BUSY		0xB0
+
+/* Image Converter Register bits */
+#define IC_CONF_PRPENC_EN	0x00000001
+#define IC_CONF_PRPENC_CSC1	0x00000002
+#define IC_CONF_PRPENC_ROT_EN	0x00000004
+#define IC_CONF_PRPVF_EN	0x00000100
+#define IC_CONF_PRPVF_CSC1	0x00000200
+#define IC_CONF_PRPVF_CSC2	0x00000400
+#define IC_CONF_PRPVF_CMB	0x00000800
+#define IC_CONF_PRPVF_ROT_EN	0x00001000
+#define IC_CONF_PP_EN		0x00010000
+#define IC_CONF_PP_CSC1		0x00020000
+#define IC_CONF_PP_CSC2		0x00040000
+#define IC_CONF_PP_CMB		0x00080000
+#define IC_CONF_PP_ROT_EN	0x00100000
+#define IC_CONF_IC_GLB_LOC_A	0x10000000
+#define IC_CONF_KEY_COLOR_EN	0x20000000
+#define IC_CONF_RWS_EN		0x40000000
+#define IC_CONF_CSI_MEM_WR_EN	0x80000000
+
+#define IDMA_CHAN_INVALID	0x000000FF
+#define IDMA_IC_0		0x00000001
+#define IDMA_IC_1		0x00000002
+#define IDMA_IC_2		0x00000004
+#define IDMA_IC_3		0x00000008
+#define IDMA_IC_4		0x00000010
+#define IDMA_IC_5		0x00000020
+#define IDMA_IC_6		0x00000040
+#define IDMA_IC_7		0x00000080
+#define IDMA_IC_8		0x00000100
+#define IDMA_IC_9		0x00000200
+#define IDMA_IC_10		0x00000400
+#define IDMA_IC_11		0x00000800
+#define IDMA_IC_12		0x00001000
+#define IDMA_IC_13		0x00002000
+#define IDMA_SDC_BG		0x00004000
+#define IDMA_SDC_FG		0x00008000
+#define IDMA_SDC_MASK		0x00010000
+#define IDMA_SDC_PARTIAL	0x00020000
+#define IDMA_ADC_SYS1_WR	0x00040000
+#define IDMA_ADC_SYS2_WR	0x00080000
+#define IDMA_ADC_SYS1_CMD	0x00100000
+#define IDMA_ADC_SYS2_CMD	0x00200000
+#define IDMA_ADC_SYS1_RD	0x00400000
+#define IDMA_ADC_SYS2_RD	0x00800000
+#define IDMA_PF_QP		0x01000000
+#define IDMA_PF_BSP		0x02000000
+#define IDMA_PF_Y_IN		0x04000000
+#define IDMA_PF_U_IN		0x08000000
+#define IDMA_PF_V_IN		0x10000000
+#define IDMA_PF_Y_OUT		0x20000000
+#define IDMA_PF_U_OUT		0x40000000
+#define IDMA_PF_V_OUT		0x80000000
+
+#define TSTAT_PF_H264_PAUSE	0x00000001
+#define TSTAT_CSI2MEM_MASK	0x0000000C
+#define TSTAT_CSI2MEM_OFFSET	2
+#define TSTAT_VF_MASK		0x00000600
+#define TSTAT_VF_OFFSET		9
+#define TSTAT_VF_ROT_MASK	0x000C0000
+#define TSTAT_VF_ROT_OFFSET	18
+#define TSTAT_ENC_MASK		0x00000180
+#define TSTAT_ENC_OFFSET	7
+#define TSTAT_ENC_ROT_MASK	0x00030000
+#define TSTAT_ENC_ROT_OFFSET	16
+#define TSTAT_PP_MASK		0x00001800
+#define TSTAT_PP_OFFSET		11
+#define TSTAT_PP_ROT_MASK	0x00300000
+#define TSTAT_PP_ROT_OFFSET	20
+#define TSTAT_PF_MASK		0x00C00000
+#define TSTAT_PF_OFFSET		22
+#define TSTAT_ADCSYS1_MASK	0x03000000
+#define TSTAT_ADCSYS1_OFFSET	24
+#define TSTAT_ADCSYS2_MASK	0x0C000000
+#define TSTAT_ADCSYS2_OFFSET	26
+
+#define TASK_STAT_IDLE		0
+#define TASK_STAT_ACTIVE	1
+#define TASK_STAT_WAIT4READY	2
+
+struct idmac {
+	struct dma_device	dma;
+};
+
+struct ipu {
+	void __iomem		*reg_ipu;
+	void __iomem		*reg_ic;
+	unsigned int		irq_fn;		/* IPU Function IRQ to the CPU */
+	unsigned int		irq_err;	/* IPU Error IRQ to the CPU */
+	unsigned int		irq_base;	/* Beginning of the IPU IRQ range */
+	unsigned long		channel_init_mask;
+	spinlock_t		lock;
+	struct clk		*ipu_clk;
+	struct device		*dev;
+	struct idmac		idmac;
+	struct idmac_channel	channel[IPU_CHANNELS_NUM];
+	struct tasklet_struct	tasklet;
+};
+
+#define to_idmac(d) container_of(d, struct idmac, dma)
+
+extern int ipu_irq_attach_irq(struct ipu *ipu, struct platform_device *dev);
+extern void ipu_irq_detach_irq(struct ipu *ipu, struct platform_device *dev);
+
+extern bool ipu_irq_status(uint32_t irq);
+extern int ipu_irq_map(unsigned int source);
+extern int ipu_irq_unmap(unsigned int source);
+
+#endif
diff --git a/drivers/dma/ipu/ipu_irq.c b/drivers/dma/ipu/ipu_irq.c
new file mode 100644
index 0000000..83f532c
--- /dev/null
+++ b/drivers/dma/ipu/ipu_irq.c
@@ -0,0 +1,413 @@
+/*
+ * Copyright (C) 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/ipu.h>
+
+#include "ipu_intern.h"
+
+/*
+ * Register read / write - shall be inlined by the compiler
+ */
+static u32 ipu_read_reg(struct ipu *ipu, unsigned long reg)
+{
+	return __raw_readl(ipu->reg_ipu + reg);
+}
+
+static void ipu_write_reg(struct ipu *ipu, u32 value, unsigned long reg)
+{
+	__raw_writel(value, ipu->reg_ipu + reg);
+}
+
+
+/*
+ * IPU IRQ chip driver
+ */
+
+#define IPU_IRQ_NR_FN_BANKS 3
+#define IPU_IRQ_NR_ERR_BANKS 2
+#define IPU_IRQ_NR_BANKS (IPU_IRQ_NR_FN_BANKS + IPU_IRQ_NR_ERR_BANKS)
+
+struct ipu_irq_bank {
+	unsigned int	control;
+	unsigned int	status;
+	spinlock_t	lock;
+	struct ipu	*ipu;
+};
+
+static struct ipu_irq_bank irq_bank[IPU_IRQ_NR_BANKS] = {
+	/* 3 groups of functional interrupts */
+	{
+		.control	= IPU_INT_CTRL_1,
+		.status		= IPU_INT_STAT_1,
+	}, {
+		.control	= IPU_INT_CTRL_2,
+		.status		= IPU_INT_STAT_2,
+	}, {
+		.control	= IPU_INT_CTRL_3,
+		.status		= IPU_INT_STAT_3,
+	},
+	/* 2 groups of error interrupts */
+	{
+		.control	= IPU_INT_CTRL_4,
+		.status		= IPU_INT_STAT_4,
+	}, {
+		.control	= IPU_INT_CTRL_5,
+		.status		= IPU_INT_STAT_5,
+	},
+};
+
+struct ipu_irq_map {
+	unsigned int		irq;
+	int			source;
+	struct ipu_irq_bank	*bank;
+	struct ipu		*ipu;
+};
+
+static struct ipu_irq_map irq_map[CONFIG_MX3_IPU_IRQS];
+/* Protects allocations from the above array of maps */
+static DEFINE_MUTEX(map_lock);
+/* Protects register accesses and individual mappings */
+static DEFINE_SPINLOCK(bank_lock);
+
+static struct ipu_irq_map *src2map(unsigned int src)
+{
+	int i;
+
+	for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++)
+		if (irq_map[i].source == src)
+			return irq_map + i;
+
+	return NULL;
+}
+
+static void ipu_irq_unmask(unsigned int irq)
+{
+	struct ipu_irq_map *map = get_irq_chip_data(irq);
+	struct ipu_irq_bank *bank;
+	uint32_t reg;
+	unsigned long lock_flags;
+
+	spin_lock_irqsave(&bank_lock, lock_flags);
+
+	bank = map->bank;
+	if (!bank) {
+		spin_unlock_irqrestore(&bank_lock, lock_flags);
+		pr_err("IPU: %s(%u) - unmapped!\n", __func__, irq);
+		return;
+	}
+
+	reg = ipu_read_reg(bank->ipu, bank->control);
+	reg |= (1UL << (map->source & 31));
+	ipu_write_reg(bank->ipu, reg, bank->control);
+
+	spin_unlock_irqrestore(&bank_lock, lock_flags);
+}
+
+static void ipu_irq_mask(unsigned int irq)
+{
+	struct ipu_irq_map *map = get_irq_chip_data(irq);
+	struct ipu_irq_bank *bank;
+	uint32_t reg;
+	unsigned long lock_flags;
+
+	spin_lock_irqsave(&bank_lock, lock_flags);
+
+	bank = map->bank;
+	if (!bank) {
+		spin_unlock_irqrestore(&bank_lock, lock_flags);
+		pr_err("IPU: %s(%u) - unmapped!\n", __func__, irq);
+		return;
+	}
+
+	reg = ipu_read_reg(bank->ipu, bank->control);
+	reg &= ~(1UL << (map->source & 31));
+	ipu_write_reg(bank->ipu, reg, bank->control);
+
+	spin_unlock_irqrestore(&bank_lock, lock_flags);
+}
+
+static void ipu_irq_ack(unsigned int irq)
+{
+	struct ipu_irq_map *map = get_irq_chip_data(irq);
+	struct ipu_irq_bank *bank;
+	unsigned long lock_flags;
+
+	spin_lock_irqsave(&bank_lock, lock_flags);
+
+	bank = map->bank;
+	if (!bank) {
+		spin_unlock_irqrestore(&bank_lock, lock_flags);
+		pr_err("IPU: %s(%u) - unmapped!\n", __func__, irq);
+		return;
+	}
+
+	ipu_write_reg(bank->ipu, 1UL << (map->source & 31), bank->status);
+	spin_unlock_irqrestore(&bank_lock, lock_flags);
+}
+
+/**
+ * ipu_irq_status() - returns the current interrupt status of the specified IRQ.
+ * @irq:	interrupt line to get status for.
+ * @return:	true if the interrupt is pending/asserted or false if the
+ *		interrupt is not pending.
+ */
+bool ipu_irq_status(unsigned int irq)
+{
+	struct ipu_irq_map *map = get_irq_chip_data(irq);
+	struct ipu_irq_bank *bank;
+	unsigned long lock_flags;
+	bool ret;
+
+	spin_lock_irqsave(&bank_lock, lock_flags);
+	bank = map->bank;
+	ret = bank && ipu_read_reg(bank->ipu, bank->status) &
+		(1UL << (map->source & 31));
+	spin_unlock_irqrestore(&bank_lock, lock_flags);
+
+	return ret;
+}
+
+/**
+ * ipu_irq_map() - map an IPU interrupt source to an IRQ number
+ * @source:	interrupt source bit position (see below)
+ * @return:	mapped IRQ number or negative error code
+ *
+ * The source parameter has to be explained further. On i.MX31 IPU has 137 IRQ
+ * sources, they are broken down in 5 32-bit registers, like 32, 32, 24, 32, 17.
+ * However, the source argument of this function is not the sequence number of
+ * the possible IRQ, but rather its bit position. So, first interrupt in fourth
+ * register has source number 96, and not 88. This makes calculations easier,
+ * and also provides forward compatibility with any future IPU implementations
+ * with any interrupt bit assignments.
+ */
+int ipu_irq_map(unsigned int source)
+{
+	int i, ret = -ENOMEM;
+	struct ipu_irq_map *map;
+
+	might_sleep();
+
+	mutex_lock(&map_lock);
+	map = src2map(source);
+	if (map) {
+		pr_err("IPU: Source %u already mapped to IRQ %u\n", source, map->irq);
+		ret = -EBUSY;
+		goto out;
+	}
+
+	for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++) {
+		if (irq_map[i].source < 0) {
+			unsigned long lock_flags;
+
+			spin_lock_irqsave(&bank_lock, lock_flags);
+			irq_map[i].source = source;
+			irq_map[i].bank = irq_bank + source / 32;
+			spin_unlock_irqrestore(&bank_lock, lock_flags);
+
+			ret = irq_map[i].irq;
+			pr_debug("IPU: mapped source %u to IRQ %u\n",
+				 source, ret);
+			break;
+		}
+	}
+out:
+	mutex_unlock(&map_lock);
+
+	if (ret < 0)
+		pr_err("IPU: couldn't map source %u: %d\n", source, ret);
+
+	return ret;
+}
+
+/**
+ * ipu_irq_map() - map an IPU interrupt source to an IRQ number
+ * @source:	interrupt source bit position (see ipu_irq_map())
+ * @return:	0 or negative error code
+ */
+int ipu_irq_unmap(unsigned int source)
+{
+	int i, ret = -EINVAL;
+
+	might_sleep();
+
+	mutex_lock(&map_lock);
+	for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++) {
+		if (irq_map[i].source == source) {
+			unsigned long lock_flags;
+
+			pr_debug("IPU: unmapped source %u from IRQ %u\n",
+				 source, irq_map[i].irq);
+
+			spin_lock_irqsave(&bank_lock, lock_flags);
+			irq_map[i].source = -EINVAL;
+			irq_map[i].bank = NULL;
+			spin_unlock_irqrestore(&bank_lock, lock_flags);
+
+			ret = 0;
+			break;
+		}
+	}
+	mutex_unlock(&map_lock);
+
+	return ret;
+}
+
+/* Chained IRQ handler for IPU error interrupt */
+static void ipu_irq_err(unsigned int irq, struct irq_desc *desc)
+{
+	struct ipu *ipu = get_irq_data(irq);
+	u32 status;
+	int i, line;
+
+	for (i = IPU_IRQ_NR_FN_BANKS; i < IPU_IRQ_NR_BANKS; i++) {
+		struct ipu_irq_bank *bank = irq_bank + i;
+
+		spin_lock(&bank_lock);
+		status = ipu_read_reg(ipu, bank->status);
+		/*
+		 * Don't think we have to clear all interrupts here, they will
+		 * be acked by ->handle_irq() (handle_level_irq). However, we
+		 * might want to clear unhandled interrupts after the loop...
+		 */
+		status &= ipu_read_reg(ipu, bank->control);
+		spin_unlock(&bank_lock);
+		while ((line = ffs(status))) {
+			struct ipu_irq_map *map;
+
+			line--;
+			status &= ~(1UL << line);
+
+			spin_lock(&bank_lock);
+			map = src2map(32 * i + line);
+			if (map)
+				irq = map->irq;
+			spin_unlock(&bank_lock);
+
+			if (!map) {
+				pr_err("IPU: Interrupt on unmapped source %u bank %d\n",
+				       line, i);
+				continue;
+			}
+			generic_handle_irq(irq);
+		}
+	}
+}
+
+/* Chained IRQ handler for IPU function interrupt */
+static void ipu_irq_fn(unsigned int irq, struct irq_desc *desc)
+{
+	struct ipu *ipu = get_irq_data(irq);
+	u32 status;
+	int i, line;
+
+	for (i = 0; i < IPU_IRQ_NR_FN_BANKS; i++) {
+		struct ipu_irq_bank *bank = irq_bank + i;
+
+		spin_lock(&bank_lock);
+		status = ipu_read_reg(ipu, bank->status);
+		/* Not clearing all interrupts, see above */
+		status &= ipu_read_reg(ipu, bank->control);
+		spin_unlock(&bank_lock);
+		while ((line = ffs(status))) {
+			struct ipu_irq_map *map;
+
+			line--;
+			status &= ~(1UL << line);
+
+			spin_lock(&bank_lock);
+			map = src2map(32 * i + line);
+			if (map)
+				irq = map->irq;
+			spin_unlock(&bank_lock);
+
+			if (!map) {
+				pr_err("IPU: Interrupt on unmapped source %u bank %d\n",
+				       line, i);
+				continue;
+			}
+			generic_handle_irq(irq);
+		}
+	}
+}
+
+static struct irq_chip ipu_irq_chip = {
+	.name	= "ipu_irq",
+	.ack	= ipu_irq_ack,
+	.mask	= ipu_irq_mask,
+	.unmask	= ipu_irq_unmask,
+};
+
+/* Install the IRQ handler */
+int ipu_irq_attach_irq(struct ipu *ipu, struct platform_device *dev)
+{
+	struct ipu_platform_data *pdata = dev->dev.platform_data;
+	unsigned int irq, irq_base, i;
+
+	irq_base = pdata->irq_base;
+
+	for (i = 0; i < IPU_IRQ_NR_BANKS; i++)
+		irq_bank[i].ipu = ipu;
+
+	for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++) {
+		int ret;
+
+		irq = irq_base + i;
+		ret = set_irq_chip(irq, &ipu_irq_chip);
+		if (ret < 0)
+			return ret;
+		ret = set_irq_chip_data(irq, irq_map + i);
+		if (ret < 0)
+			return ret;
+		irq_map[i].ipu = ipu;
+		irq_map[i].irq = irq;
+		irq_map[i].source = -EINVAL;
+		set_irq_handler(irq, handle_level_irq);
+#ifdef CONFIG_ARM
+		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+#endif
+	}
+
+	set_irq_data(ipu->irq_fn, ipu);
+	set_irq_chained_handler(ipu->irq_fn, ipu_irq_fn);
+
+	set_irq_data(ipu->irq_err, ipu);
+	set_irq_chained_handler(ipu->irq_err, ipu_irq_err);
+
+	return 0;
+}
+
+void ipu_irq_detach_irq(struct ipu *ipu, struct platform_device *dev)
+{
+	struct ipu_platform_data *pdata = dev->dev.platform_data;
+	unsigned int irq, irq_base;
+
+	irq_base = pdata->irq_base;
+
+	set_irq_chained_handler(ipu->irq_fn, NULL);
+	set_irq_data(ipu->irq_fn, NULL);
+
+	set_irq_chained_handler(ipu->irq_err, NULL);
+	set_irq_data(ipu->irq_err, NULL);
+
+	for (irq = irq_base; irq < irq_base + CONFIG_MX3_IPU_IRQS; irq++) {
+#ifdef CONFIG_ARM
+		set_irq_flags(irq, 0);
+#endif
+		set_irq_chip(irq, NULL);
+		set_irq_chip_data(irq, NULL);
+	}
+}
diff --git a/drivers/edac/cell_edac.c b/drivers/edac/cell_edac.c
index cd2e3b8..24f3ca8 100644
--- a/drivers/edac/cell_edac.c
+++ b/drivers/edac/cell_edac.c
@@ -36,7 +36,7 @@
 	struct csrow_info		*csrow = &mci->csrows[0];
 	unsigned long			address, pfn, offset, syndrome;
 
-	dev_dbg(mci->dev, "ECC CE err on node %d, channel %d, ar = 0x%016lx\n",
+	dev_dbg(mci->dev, "ECC CE err on node %d, channel %d, ar = 0x%016llx\n",
 		priv->node, chan, ar);
 
 	/* Address decoding is likely a bit bogus, to dbl check */
@@ -58,7 +58,7 @@
 	struct csrow_info		*csrow = &mci->csrows[0];
 	unsigned long			address, pfn, offset;
 
-	dev_dbg(mci->dev, "ECC UE err on node %d, channel %d, ar = 0x%016lx\n",
+	dev_dbg(mci->dev, "ECC UE err on node %d, channel %d, ar = 0x%016llx\n",
 		priv->node, chan, ar);
 
 	/* Address decoding is likely a bit bogus, to dbl check */
@@ -169,7 +169,7 @@
 
 	/* Get channel population */
 	reg = in_be64(&regs->mic_mnt_cfg);
-	dev_dbg(&pdev->dev, "MIC_MNT_CFG = 0x%016lx\n", reg);
+	dev_dbg(&pdev->dev, "MIC_MNT_CFG = 0x%016llx\n", reg);
 	chanmask = 0;
 	if (reg & CBE_MIC_MNT_CFG_CHAN_0_POP)
 		chanmask |= 0x1;
@@ -180,7 +180,7 @@
 			 "Yuck ! No channel populated ? Aborting !\n");
 		return -ENODEV;
 	}
-	dev_dbg(&pdev->dev, "Initial FIR = 0x%016lx\n",
+	dev_dbg(&pdev->dev, "Initial FIR = 0x%016llx\n",
 		in_be64(&regs->mic_fir));
 
 	/* Allocate & init EDAC MC data structure */
diff --git a/drivers/firmware/dell_rbu.c b/drivers/firmware/dell_rbu.c
index 13946eb..b4704e1 100644
--- a/drivers/firmware/dell_rbu.c
+++ b/drivers/firmware/dell_rbu.c
@@ -576,7 +576,7 @@
 {
 	int size = 0;
 	if (!pos)
-		size = sprintf(buffer, "%s\n", image_type);
+		size = scnprintf(buffer, count, "%s\n", image_type);
 	return size;
 }
 
@@ -648,7 +648,7 @@
 	int size = 0;
 	if (!pos) {
 		spin_lock(&rbu_data.lock);
-		size = sprintf(buffer, "%lu\n", rbu_data.packetsize);
+		size = scnprintf(buffer, count, "%lu\n", rbu_data.packetsize);
 		spin_unlock(&rbu_data.lock);
 	}
 	return size;
diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
index d76adfe..8f0f7c4 100644
--- a/drivers/firmware/dmi_scan.c
+++ b/drivers/firmware/dmi_scan.c
@@ -415,6 +415,29 @@
 }
 
 /**
+ *	dmi_matches - check if dmi_system_id structure matches system DMI data
+ *	@dmi: pointer to the dmi_system_id structure to check
+ */
+static bool dmi_matches(const struct dmi_system_id *dmi)
+{
+	int i;
+
+	WARN(!dmi_initialized, KERN_ERR "dmi check: not initialized yet.\n");
+
+	for (i = 0; i < ARRAY_SIZE(dmi->matches); i++) {
+		int s = dmi->matches[i].slot;
+		if (s == DMI_NONE)
+			continue;
+		if (dmi_ident[s]
+		    && strstr(dmi_ident[s], dmi->matches[i].substr))
+			continue;
+		/* No match */
+		return false;
+	}
+	return true;
+}
+
+/**
  *	dmi_check_system - check system DMI data
  *	@list: array of dmi_system_id structures to match against
  *		All non-null elements of the list must match
@@ -429,32 +452,45 @@
  */
 int dmi_check_system(const struct dmi_system_id *list)
 {
-	int i, count = 0;
-	const struct dmi_system_id *d = list;
+	int count = 0;
+	const struct dmi_system_id *d;
 
-	WARN(!dmi_initialized, KERN_ERR "dmi check: not initialized yet.\n");
-
-	while (d->ident) {
-		for (i = 0; i < ARRAY_SIZE(d->matches); i++) {
-			int s = d->matches[i].slot;
-			if (s == DMI_NONE)
-				continue;
-			if (dmi_ident[s] && strstr(dmi_ident[s], d->matches[i].substr))
-				continue;
-			/* No match */
-			goto fail;
+	for (d = list; d->ident; d++)
+		if (dmi_matches(d)) {
+			count++;
+			if (d->callback && d->callback(d))
+				break;
 		}
-		count++;
-		if (d->callback && d->callback(d))
-			break;
-fail:		d++;
-	}
 
 	return count;
 }
 EXPORT_SYMBOL(dmi_check_system);
 
 /**
+ *	dmi_first_match - find dmi_system_id structure matching system DMI data
+ *	@list: array of dmi_system_id structures to match against
+ *		All non-null elements of the list must match
+ *		their slot's (field index's) data (i.e., each
+ *		list string must be a substring of the specified
+ *		DMI slot's string data) to be considered a
+ *		successful match.
+ *
+ *	Walk the blacklist table until the first match is found.  Return the
+ *	pointer to the matching entry or NULL if there's no match.
+ */
+const struct dmi_system_id *dmi_first_match(const struct dmi_system_id *list)
+{
+	const struct dmi_system_id *d;
+
+	for (d = list; d->ident; d++)
+		if (dmi_matches(d))
+			return d;
+
+	return NULL;
+}
+EXPORT_SYMBOL(dmi_first_match);
+
+/**
  *	dmi_get_system_info - return DMI data value
  *	@field: data index (see enum dmi_field)
  *
diff --git a/drivers/gpio/max7301.c b/drivers/gpio/max7301.c
index 8b24d78..3e7f4e0 100644
--- a/drivers/gpio/max7301.c
+++ b/drivers/gpio/max7301.c
@@ -217,8 +217,10 @@
 	int i, ret;
 
 	pdata = spi->dev.platform_data;
-	if (!pdata || !pdata->base)
-		return -ENODEV;
+	if (!pdata || !pdata->base) {
+		dev_dbg(&spi->dev, "incorrect or missing platform data\n");
+		return -EINVAL;
+	}
 
 	/*
 	 * bits_per_word cannot be configured in platform data
diff --git a/drivers/gpio/max732x.c b/drivers/gpio/max732x.c
index 55ae9a4..f786824 100644
--- a/drivers/gpio/max732x.c
+++ b/drivers/gpio/max732x.c
@@ -267,8 +267,10 @@
 	int ret, nr_port;
 
 	pdata = client->dev.platform_data;
-	if (pdata == NULL)
-		return -ENODEV;
+	if (pdata == NULL) {
+		dev_dbg(&client->dev, "no platform data\n");
+		return -EINVAL;
+	}
 
 	chip = kzalloc(sizeof(struct max732x_chip), GFP_KERNEL);
 	if (chip == NULL)
diff --git a/drivers/gpio/mcp23s08.c b/drivers/gpio/mcp23s08.c
index 89c1d22..f6fae0e 100644
--- a/drivers/gpio/mcp23s08.c
+++ b/drivers/gpio/mcp23s08.c
@@ -310,8 +310,10 @@
 	unsigned			base;
 
 	pdata = spi->dev.platform_data;
-	if (!pdata || !gpio_is_valid(pdata->base))
-		return -ENODEV;
+	if (!pdata || !gpio_is_valid(pdata->base)) {
+		dev_dbg(&spi->dev, "invalid or missing platform data\n");
+		return -EINVAL;
+	}
 
 	for (addr = 0; addr < 4; addr++) {
 		if (!pdata->chip[addr].is_present)
diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c
index 37f35388..8dc0164 100644
--- a/drivers/gpio/pca953x.c
+++ b/drivers/gpio/pca953x.c
@@ -202,8 +202,10 @@
 	int ret;
 
 	pdata = client->dev.platform_data;
-	if (pdata == NULL)
-		return -ENODEV;
+	if (pdata == NULL) {
+		dev_dbg(&client->dev, "no platform data\n");
+		return -EINVAL;
+	}
 
 	chip = kzalloc(sizeof(struct pca953x_chip), GFP_KERNEL);
 	if (chip == NULL)
diff --git a/drivers/gpio/pcf857x.c b/drivers/gpio/pcf857x.c
index 4bc2070..9525724 100644
--- a/drivers/gpio/pcf857x.c
+++ b/drivers/gpio/pcf857x.c
@@ -188,8 +188,10 @@
 	int				status;
 
 	pdata = client->dev.platform_data;
-	if (!pdata)
-		return -ENODEV;
+	if (!pdata) {
+		dev_dbg(&client->dev, "no platform data\n");
+		return -EINVAL;
+	}
 
 	/* Allocate, initialize, and register this gpio_chip. */
 	gpio = kzalloc(sizeof *gpio, GFP_KERNEL);
@@ -248,8 +250,10 @@
 		else
 			status = i2c_read_le16(client);
 
-	} else
-		status = -ENODEV;
+	} else {
+		dev_dbg(&client->dev, "unsupported number of gpios\n");
+		status = -EINVAL;
+	}
 
 	if (status < 0)
 		goto fail;
diff --git a/drivers/gpu/drm/drm_agpsupport.c b/drivers/gpu/drm/drm_agpsupport.c
index 3d33b82..1479659 100644
--- a/drivers/gpu/drm/drm_agpsupport.c
+++ b/drivers/gpu/drm/drm_agpsupport.c
@@ -33,10 +33,11 @@
 
 #include "drmP.h"
 #include <linux/module.h>
-#include <asm/agp.h>
 
 #if __OS_HAS_AGP
 
+#include <asm/agp.h>
+
 /**
  * Get AGP information.
  *
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 5b2cbb7..bfce099 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -194,7 +194,6 @@
  * @type: object type
  *
  * LOCKING:
- * Caller must hold DRM mode_config lock.
  *
  * Create a unique identifier based on @ptr in @dev's identifier space.  Used
  * for tracking modes, CRTCs and connectors.
@@ -209,15 +208,15 @@
 	int new_id = 0;
 	int ret;
 
-	WARN(!mutex_is_locked(&dev->mode_config.mutex),
-	     "%s called w/o mode_config lock\n", __func__);
 again:
 	if (idr_pre_get(&dev->mode_config.crtc_idr, GFP_KERNEL) == 0) {
 		DRM_ERROR("Ran out memory getting a mode number\n");
 		return -EINVAL;
 	}
 
+	mutex_lock(&dev->mode_config.idr_mutex);
 	ret = idr_get_new_above(&dev->mode_config.crtc_idr, obj, 1, &new_id);
+	mutex_unlock(&dev->mode_config.idr_mutex);
 	if (ret == -EAGAIN)
 		goto again;
 
@@ -239,16 +238,20 @@
 static void drm_mode_object_put(struct drm_device *dev,
 				struct drm_mode_object *object)
 {
+	mutex_lock(&dev->mode_config.idr_mutex);
 	idr_remove(&dev->mode_config.crtc_idr, object->id);
+	mutex_unlock(&dev->mode_config.idr_mutex);
 }
 
 void *drm_mode_object_find(struct drm_device *dev, uint32_t id, uint32_t type)
 {
-	struct drm_mode_object *obj;
+	struct drm_mode_object *obj = NULL;
 
+	mutex_lock(&dev->mode_config.idr_mutex);
 	obj = idr_find(&dev->mode_config.crtc_idr, id);
 	if (!obj || (obj->type != type) || (obj->id != id))
-		return NULL;
+		obj = NULL;
+	mutex_unlock(&dev->mode_config.idr_mutex);
 
 	return obj;
 }
@@ -786,6 +789,7 @@
 void drm_mode_config_init(struct drm_device *dev)
 {
 	mutex_init(&dev->mode_config.mutex);
+	mutex_init(&dev->mode_config.idr_mutex);
 	INIT_LIST_HEAD(&dev->mode_config.fb_list);
 	INIT_LIST_HEAD(&dev->mode_config.fb_kernel_list);
 	INIT_LIST_HEAD(&dev->mode_config.crtc_list);
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index d8a982b..964c5eb 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -36,7 +36,7 @@
 /*
  * Detailed mode info for 800x600@60Hz
  */
-static struct drm_display_mode std_mode[] = {
+static struct drm_display_mode std_modes[] = {
 	{ DRM_MODE("800x600", DRM_MODE_TYPE_DEFAULT, 40000, 800, 840,
 		   968, 1056, 0, 600, 601, 605, 628, 0,
 		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) },
@@ -60,15 +60,18 @@
  * changes have occurred.
  *
  * FIXME: take into account monitor limits
+ *
+ * RETURNS:
+ * Number of modes found on @connector.
  */
-void drm_helper_probe_single_connector_modes(struct drm_connector *connector,
-					     uint32_t maxX, uint32_t maxY)
+int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
+					    uint32_t maxX, uint32_t maxY)
 {
 	struct drm_device *dev = connector->dev;
 	struct drm_display_mode *mode, *t;
 	struct drm_connector_helper_funcs *connector_funcs =
 		connector->helper_private;
-	int ret;
+	int count = 0;
 
 	DRM_DEBUG("%s\n", drm_get_connector_name(connector));
 	/* set all modes to the unverified state */
@@ -81,14 +84,14 @@
 		DRM_DEBUG("%s is disconnected\n",
 			  drm_get_connector_name(connector));
 		/* TODO set EDID to NULL */
-		return;
+		return 0;
 	}
 
-	ret = (*connector_funcs->get_modes)(connector);
+	count = (*connector_funcs->get_modes)(connector);
+	if (!count)
+		return 0;
 
-	if (ret) {
-		drm_mode_connector_list_update(connector);
-	}
+	drm_mode_connector_list_update(connector);
 
 	if (maxX && maxY)
 		drm_mode_validate_size(dev, &connector->modes, maxX,
@@ -102,25 +105,8 @@
 
 	drm_mode_prune_invalid(dev, &connector->modes, true);
 
-	if (list_empty(&connector->modes)) {
-		struct drm_display_mode *stdmode;
-
-		DRM_DEBUG("No valid modes on %s\n",
-			  drm_get_connector_name(connector));
-
-		/* Should we do this here ???
-		 * When no valid EDID modes are available we end up
-		 * here and bailed in the past, now we add a standard
-		 * 640x480@60Hz mode and carry on.
-		 */
-		stdmode = drm_mode_duplicate(dev, &std_mode[0]);
-		drm_mode_probed_add(connector, stdmode);
-		drm_mode_list_concat(&connector->probed_modes,
-				     &connector->modes);
-
-		DRM_DEBUG("Adding standard 640x480 @ 60Hz to %s\n",
-			  drm_get_connector_name(connector));
-	}
+	if (list_empty(&connector->modes))
+		return 0;
 
 	drm_mode_sort(&connector->modes);
 
@@ -131,20 +117,58 @@
 		drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
 		drm_mode_debug_printmodeline(mode);
 	}
+
+	return count;
 }
 EXPORT_SYMBOL(drm_helper_probe_single_connector_modes);
 
-void drm_helper_probe_connector_modes(struct drm_device *dev, uint32_t maxX,
+int drm_helper_probe_connector_modes(struct drm_device *dev, uint32_t maxX,
 				      uint32_t maxY)
 {
 	struct drm_connector *connector;
+	int count = 0;
 
 	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
-		drm_helper_probe_single_connector_modes(connector, maxX, maxY);
+		count += drm_helper_probe_single_connector_modes(connector,
+								 maxX, maxY);
 	}
+
+	return count;
 }
 EXPORT_SYMBOL(drm_helper_probe_connector_modes);
 
+static void drm_helper_add_std_modes(struct drm_device *dev,
+				     struct drm_connector *connector)
+{
+	struct drm_display_mode *mode, *t;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(std_modes); i++) {
+		struct drm_display_mode *stdmode;
+
+		/*
+		 * When no valid EDID modes are available we end up
+		 * here and bailed in the past, now we add some standard
+		 * modes and move on.
+		 */
+		stdmode = drm_mode_duplicate(dev, &std_modes[i]);
+		drm_mode_probed_add(connector, stdmode);
+		drm_mode_list_concat(&connector->probed_modes,
+				     &connector->modes);
+
+		DRM_DEBUG("Adding mode %s to %s\n", stdmode->name,
+			  drm_get_connector_name(connector));
+	}
+	drm_mode_sort(&connector->modes);
+
+	DRM_DEBUG("Added std modes on %s\n", drm_get_connector_name(connector));
+	list_for_each_entry_safe(mode, t, &connector->modes, head) {
+		mode->vrefresh = drm_mode_vrefresh(mode);
+
+		drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
+		drm_mode_debug_printmodeline(mode);
+	}
+}
 
 /**
  * drm_helper_crtc_in_use - check if a given CRTC is in a mode_config
@@ -237,6 +261,8 @@
 
 	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
 		enabled[i] = drm_connector_enabled(connector, true);
+		DRM_DEBUG("connector %d enabled? %s\n", connector->base.id,
+			  enabled[i] ? "yes" : "no");
 		any_enabled |= enabled[i];
 		i++;
 	}
@@ -265,11 +291,17 @@
 			continue;
 		}
 
+		DRM_DEBUG("looking for preferred mode on connector %d\n",
+			  connector->base.id);
+
 		modes[i] = drm_has_preferred_mode(connector, width, height);
-		if (!modes[i]) {
+		/* No preferred modes, pick one off the list */
+		if (!modes[i] && !list_empty(&connector->modes)) {
 			list_for_each_entry(modes[i], &connector->modes, head)
 				break;
 		}
+		DRM_DEBUG("found mode %s\n", modes[i] ? modes[i]->name :
+			  "none");
 		i++;
 	}
 	return true;
@@ -369,6 +401,8 @@
 	int width, height;
 	int i, ret;
 
+	DRM_DEBUG("\n");
+
 	width = dev->mode_config.max_width;
 	height = dev->mode_config.max_height;
 
@@ -390,6 +424,8 @@
 	if (!ret)
 		DRM_ERROR("Unable to find initial modes\n");
 
+	DRM_DEBUG("picking CRTCs for %dx%d config\n", width, height);
+
 	drm_pick_crtcs(dev, crtcs, modes, 0, width, height);
 
 	i = 0;
@@ -403,6 +439,8 @@
 		}
 
 		if (mode && crtc) {
+			DRM_DEBUG("desired mode %s set on crtc %d\n",
+				  mode->name, crtc->base.id);
 			crtc->desired_mode = mode;
 			connector->encoder->crtc = crtc;
 		} else
@@ -442,6 +480,7 @@
 	int saved_x, saved_y;
 	struct drm_encoder *encoder;
 	bool ret = true;
+	bool depth_changed, bpp_changed;
 
 	adjusted_mode = drm_mode_duplicate(dev, mode);
 
@@ -450,6 +489,15 @@
 	if (!crtc->enabled)
 		return true;
 
+	if (old_fb && crtc->fb) {
+		depth_changed = (old_fb->depth != crtc->fb->depth);
+		bpp_changed = (old_fb->bits_per_pixel !=
+			       crtc->fb->bits_per_pixel);
+	} else {
+		depth_changed = true;
+		bpp_changed = true;
+	}
+
 	saved_mode = crtc->mode;
 	saved_x = crtc->x;
 	saved_y = crtc->y;
@@ -462,7 +510,8 @@
 	crtc->y = y;
 
 	if (drm_mode_equal(&saved_mode, &crtc->mode)) {
-		if (saved_x != crtc->x || saved_y != crtc->y) {
+		if (saved_x != crtc->x || saved_y != crtc->y ||
+		    depth_changed || bpp_changed) {
 			crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y,
 						  old_fb);
 			goto done;
@@ -568,8 +617,8 @@
 	struct drm_encoder **save_encoders, *new_encoder;
 	struct drm_framebuffer *old_fb;
 	bool save_enabled;
-	bool changed = false;
-	bool flip_or_move = false;
+	bool mode_changed = false;
+	bool fb_changed = false;
 	struct drm_connector *connector;
 	int count = 0, ro, fail = 0;
 	struct drm_crtc_helper_funcs *crtc_funcs;
@@ -597,7 +646,10 @@
 	/* save previous config */
 	save_enabled = set->crtc->enabled;
 
-	/* this is meant to be num_connector not num_crtc */
+	/*
+	 * We do mode_config.num_connectors here since we'll look at the
+	 * CRTC and encoder associated with each connector later.
+	 */
 	save_crtcs = kzalloc(dev->mode_config.num_connector *
 			     sizeof(struct drm_crtc *), GFP_KERNEL);
 	if (!save_crtcs)
@@ -613,21 +665,25 @@
 	/* We should be able to check here if the fb has the same properties
 	 * and then just flip_or_move it */
 	if (set->crtc->fb != set->fb) {
-		/* if we have no fb then its a change not a flip */
+		/* If we have no fb then treat it as a full mode set */
 		if (set->crtc->fb == NULL)
-			changed = true;
+			mode_changed = true;
+		else if ((set->fb->bits_per_pixel !=
+			 set->crtc->fb->bits_per_pixel) ||
+			 set->fb->depth != set->crtc->fb->depth)
+			fb_changed = true;
 		else
-			flip_or_move = true;
+			fb_changed = true;
 	}
 
 	if (set->x != set->crtc->x || set->y != set->crtc->y)
-		flip_or_move = true;
+		fb_changed = true;
 
 	if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) {
 		DRM_DEBUG("modes are different\n");
 		drm_mode_debug_printmodeline(&set->crtc->mode);
 		drm_mode_debug_printmodeline(set->mode);
-		changed = true;
+		mode_changed = true;
 	}
 
 	/* a) traverse passed in connector list and get encoders for them */
@@ -650,7 +706,7 @@
 		}
 
 		if (new_encoder != connector->encoder) {
-			changed = true;
+			mode_changed = true;
 			connector->encoder = new_encoder;
 		}
 	}
@@ -677,16 +733,16 @@
 				new_crtc = set->crtc;
 		}
 		if (new_crtc != connector->encoder->crtc) {
-			changed = true;
+			mode_changed = true;
 			connector->encoder->crtc = new_crtc;
 		}
 	}
 
 	/* mode_set_base is not a required function */
-	if (flip_or_move && !crtc_funcs->mode_set_base)
-		changed = true;
+	if (fb_changed && !crtc_funcs->mode_set_base)
+		mode_changed = true;
 
-	if (changed) {
+	if (mode_changed) {
 		old_fb = set->crtc->fb;
 		set->crtc->fb = set->fb;
 		set->crtc->enabled = (set->mode != NULL);
@@ -705,7 +761,7 @@
 			set->crtc->desired_mode = set->mode;
 		}
 		drm_helper_disable_unused_functions(dev);
-	} else if (flip_or_move) {
+	} else if (fb_changed) {
 		old_fb = set->crtc->fb;
 		if (set->crtc->fb != set->fb)
 			set->crtc->fb = set->fb;
@@ -764,10 +820,31 @@
  */
 bool drm_helper_initial_config(struct drm_device *dev, bool can_grow)
 {
-	int ret = false;
+	struct drm_connector *connector;
+	int count = 0;
 
-	drm_helper_plugged_event(dev);
-	return ret;
+	count = drm_helper_probe_connector_modes(dev,
+						 dev->mode_config.max_width,
+						 dev->mode_config.max_height);
+
+	/*
+	 * None of the available connectors had any modes, so add some
+	 * and try to light them up anyway
+	 */
+	if (!count) {
+		DRM_ERROR("connectors have no modes, using standard modes\n");
+		list_for_each_entry(connector,
+				    &dev->mode_config.connector_list,
+				    head)
+			drm_helper_add_std_modes(dev, connector);
+	}
+
+	drm_setup_crtcs(dev);
+
+	/* alert the driver fb layer */
+	dev->mode_config.funcs->fb_changed(dev);
+
+	return 0;
 }
 EXPORT_SYMBOL(drm_helper_initial_config);
 
diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
index 5ff88d9..14c7a23 100644
--- a/drivers/gpu/drm/drm_drv.c
+++ b/drivers/gpu/drm/drm_drv.c
@@ -294,6 +294,7 @@
  */
 static void drm_cleanup(struct drm_device * dev)
 {
+	struct drm_map_list *r_list, *list_temp;
 	DRM_DEBUG("\n");
 
 	if (!dev) {
@@ -325,6 +326,9 @@
 	drm_ht_remove(&dev->map_hash);
 	drm_ctxbitmap_cleanup(dev);
 
+	list_for_each_entry_safe(r_list, list_temp, &dev->maplist, head)
+		drm_rmmap(dev, r_list->map);
+
 	if (drm_core_check_feature(dev, DRIVER_MODESET))
 		drm_put_minor(&dev->control);
 
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 0fbb0da..5a4d3244 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -660,7 +660,7 @@
 
 	edid = (struct edid *)drm_ddc_read(adapter);
 	if (!edid) {
-		dev_warn(&connector->dev->pdev->dev, "%s: no EDID data\n",
+		dev_info(&connector->dev->pdev->dev, "%s: no EDID data\n",
 			 drm_get_connector_name(connector));
 		return NULL;
 	}
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index 724e505..69aa0ab 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -106,8 +106,6 @@
 
 	drm_free(dev->vbl_queue, sizeof(*dev->vbl_queue) * dev->num_crtcs,
 		 DRM_MEM_DRIVER);
-	drm_free(dev->vbl_sigs, sizeof(*dev->vbl_sigs) * dev->num_crtcs,
-		 DRM_MEM_DRIVER);
 	drm_free(dev->_vblank_count, sizeof(*dev->_vblank_count) *
 		 dev->num_crtcs, DRM_MEM_DRIVER);
 	drm_free(dev->vblank_refcount, sizeof(*dev->vblank_refcount) *
@@ -132,7 +130,6 @@
 	setup_timer(&dev->vblank_disable_timer, vblank_disable_fn,
 		    (unsigned long)dev);
 	spin_lock_init(&dev->vbl_lock);
-	atomic_set(&dev->vbl_signal_pending, 0);
 	dev->num_crtcs = num_crtcs;
 
 	dev->vbl_queue = drm_alloc(sizeof(wait_queue_head_t) * num_crtcs,
@@ -140,11 +137,6 @@
 	if (!dev->vbl_queue)
 		goto err;
 
-	dev->vbl_sigs = drm_alloc(sizeof(struct list_head) * num_crtcs,
-				  DRM_MEM_DRIVER);
-	if (!dev->vbl_sigs)
-		goto err;
-
 	dev->_vblank_count = drm_alloc(sizeof(atomic_t) * num_crtcs,
 				      DRM_MEM_DRIVER);
 	if (!dev->_vblank_count)
@@ -177,7 +169,6 @@
 	/* Zero per-crtc vblank stuff */
 	for (i = 0; i < num_crtcs; i++) {
 		init_waitqueue_head(&dev->vbl_queue[i]);
-		INIT_LIST_HEAD(&dev->vbl_sigs[i]);
 		atomic_set(&dev->_vblank_count[i], 0);
 		atomic_set(&dev->vblank_refcount[i], 0);
 	}
@@ -267,7 +258,8 @@
  */
 int drm_irq_uninstall(struct drm_device * dev)
 {
-	int irq_enabled;
+	unsigned long irqflags;
+	int irq_enabled, i;
 
 	if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ))
 		return -EINVAL;
@@ -277,6 +269,16 @@
 	dev->irq_enabled = 0;
 	mutex_unlock(&dev->struct_mutex);
 
+	/*
+	 * Wake up any waiters so they don't hang.
+	 */
+	spin_lock_irqsave(&dev->vbl_lock, irqflags);
+	for (i = 0; i < dev->num_crtcs; i++) {
+		DRM_WAKEUP(&dev->vbl_queue[i]);
+		dev->vblank_enabled[i] = 0;
+	}
+	spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
+
 	if (!irq_enabled)
 		return -EINVAL;
 
@@ -529,15 +531,10 @@
  * \param data user argument, pointing to a drm_wait_vblank structure.
  * \return zero on success or a negative number on failure.
  *
- * Verifies the IRQ is installed.
- *
- * If a signal is requested checks if this task has already scheduled the same signal
- * for the same vblank sequence number - nothing to be done in
- * that case. If the number of tasks waiting for the interrupt exceeds 100 the
- * function fails. Otherwise adds a new entry to drm_device::vbl_sigs for this
- * task.
- *
- * If a signal is not requested, then calls vblank_wait().
+ * This function enables the vblank interrupt on the pipe requested, then
+ * sleeps waiting for the requested sequence number to occur, and drops
+ * the vblank interrupt refcount afterwards. (vblank irq disable follows that
+ * after a timeout with no further vblank waits scheduled).
  */
 int drm_wait_vblank(struct drm_device *dev, void *data,
 		    struct drm_file *file_priv)
@@ -549,6 +546,9 @@
 	if ((!dev->pdev->irq) || (!dev->irq_enabled))
 		return -EINVAL;
 
+	if (vblwait->request.type & _DRM_VBLANK_SIGNAL)
+		return -EINVAL;
+
 	if (vblwait->request.type &
 	    ~(_DRM_VBLANK_TYPES_MASK | _DRM_VBLANK_FLAGS_MASK)) {
 		DRM_ERROR("Unsupported type value 0x%x, supported mask 0x%x\n",
@@ -586,88 +586,26 @@
 		vblwait->request.sequence = seq + 1;
 	}
 
-	if (flags & _DRM_VBLANK_SIGNAL) {
-		unsigned long irqflags;
-		struct list_head *vbl_sigs = &dev->vbl_sigs[crtc];
-		struct drm_vbl_sig *vbl_sig;
+	DRM_DEBUG("waiting on vblank count %d, crtc %d\n",
+		  vblwait->request.sequence, crtc);
+	dev->last_vblank_wait[crtc] = vblwait->request.sequence;
+	DRM_WAIT_ON(ret, dev->vbl_queue[crtc], 3 * DRM_HZ,
+		    (((drm_vblank_count(dev, crtc) -
+		       vblwait->request.sequence) <= (1 << 23)) ||
+		     !dev->irq_enabled));
 
-		spin_lock_irqsave(&dev->vbl_lock, irqflags);
+	if (ret != -EINTR) {
+		struct timeval now;
 
-		/* Check if this task has already scheduled the same signal
-		 * for the same vblank sequence number; nothing to be done in
-		 * that case
-		 */
-		list_for_each_entry(vbl_sig, vbl_sigs, head) {
-			if (vbl_sig->sequence == vblwait->request.sequence
-			    && vbl_sig->info.si_signo ==
-			    vblwait->request.signal
-			    && vbl_sig->task == current) {
-				spin_unlock_irqrestore(&dev->vbl_lock,
-						       irqflags);
-				vblwait->reply.sequence = seq;
-				goto done;
-			}
-		}
+		do_gettimeofday(&now);
 
-		if (atomic_read(&dev->vbl_signal_pending) >= 100) {
-			spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
-			ret = -EBUSY;
-			goto done;
-		}
-
-		spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
-
-		vbl_sig = drm_calloc(1, sizeof(struct drm_vbl_sig),
-				     DRM_MEM_DRIVER);
-		if (!vbl_sig) {
-			ret = -ENOMEM;
-			goto done;
-		}
-
-		/* Get a refcount on the vblank, which will be released by
-		 * drm_vbl_send_signals().
-		 */
-		ret = drm_vblank_get(dev, crtc);
-		if (ret) {
-			drm_free(vbl_sig, sizeof(struct drm_vbl_sig),
-				 DRM_MEM_DRIVER);
-			goto done;
-		}
-
-		atomic_inc(&dev->vbl_signal_pending);
-
-		vbl_sig->sequence = vblwait->request.sequence;
-		vbl_sig->info.si_signo = vblwait->request.signal;
-		vbl_sig->task = current;
-
-		spin_lock_irqsave(&dev->vbl_lock, irqflags);
-
-		list_add_tail(&vbl_sig->head, vbl_sigs);
-
-		spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
-
-		vblwait->reply.sequence = seq;
+		vblwait->reply.tval_sec = now.tv_sec;
+		vblwait->reply.tval_usec = now.tv_usec;
+		vblwait->reply.sequence = drm_vblank_count(dev, crtc);
+		DRM_DEBUG("returning %d to client\n",
+			  vblwait->reply.sequence);
 	} else {
-		DRM_DEBUG("waiting on vblank count %d, crtc %d\n",
-			  vblwait->request.sequence, crtc);
-		dev->last_vblank_wait[crtc] = vblwait->request.sequence;
-		DRM_WAIT_ON(ret, dev->vbl_queue[crtc], 3 * DRM_HZ,
-			    ((drm_vblank_count(dev, crtc)
-			      - vblwait->request.sequence) <= (1 << 23)));
-
-		if (ret != -EINTR) {
-			struct timeval now;
-
-			do_gettimeofday(&now);
-
-			vblwait->reply.tval_sec = now.tv_sec;
-			vblwait->reply.tval_usec = now.tv_usec;
-			vblwait->reply.sequence = drm_vblank_count(dev, crtc);
-			DRM_DEBUG("returning %d to client\n",
-				  vblwait->reply.sequence);
-		} else {
-			DRM_DEBUG("vblank wait interrupted by signal\n");
-		}
+		DRM_DEBUG("vblank wait interrupted by signal\n");
 	}
 
 done:
@@ -676,46 +614,6 @@
 }
 
 /**
- * Send the VBLANK signals.
- *
- * \param dev DRM device.
- * \param crtc CRTC where the vblank event occurred
- *
- * Sends a signal for each task in drm_device::vbl_sigs and empties the list.
- *
- * If a signal is not requested, then calls vblank_wait().
- */
-static void drm_vbl_send_signals(struct drm_device *dev, int crtc)
-{
-	struct drm_vbl_sig *vbl_sig, *tmp;
-	struct list_head *vbl_sigs;
-	unsigned int vbl_seq;
-	unsigned long flags;
-
-	spin_lock_irqsave(&dev->vbl_lock, flags);
-
-	vbl_sigs = &dev->vbl_sigs[crtc];
-	vbl_seq = drm_vblank_count(dev, crtc);
-
-	list_for_each_entry_safe(vbl_sig, tmp, vbl_sigs, head) {
-	    if ((vbl_seq - vbl_sig->sequence) <= (1 << 23)) {
-		vbl_sig->info.si_code = vbl_seq;
-		send_sig_info(vbl_sig->info.si_signo,
-			      &vbl_sig->info, vbl_sig->task);
-
-		list_del(&vbl_sig->head);
-
-		drm_free(vbl_sig, sizeof(*vbl_sig),
-			 DRM_MEM_DRIVER);
-		atomic_dec(&dev->vbl_signal_pending);
-		drm_vblank_put(dev, crtc);
-	    }
-	}
-
-	spin_unlock_irqrestore(&dev->vbl_lock, flags);
-}
-
-/**
  * drm_handle_vblank - handle a vblank event
  * @dev: DRM device
  * @crtc: where this event occurred
@@ -727,6 +625,5 @@
 {
 	atomic_inc(&dev->_vblank_count[crtc]);
 	DRM_WAKEUP(&dev->vbl_queue[crtc]);
-	drm_vbl_send_signals(dev, crtc);
 }
 EXPORT_SYMBOL(drm_handle_vblank);
diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c
index 5ca132a..46bb923 100644
--- a/drivers/gpu/drm/drm_stub.c
+++ b/drivers/gpu/drm/drm_stub.c
@@ -118,12 +118,20 @@
 	struct drm_master *master = container_of(kref, struct drm_master, refcount);
 	struct drm_magic_entry *pt, *next;
 	struct drm_device *dev = master->minor->dev;
+	struct drm_map_list *r_list, *list_temp;
 
 	list_del(&master->head);
 
 	if (dev->driver->master_destroy)
 		dev->driver->master_destroy(dev, master);
 
+	list_for_each_entry_safe(r_list, list_temp, &dev->maplist, head) {
+		if (r_list->master == master) {
+			drm_rmmap_locked(dev, r_list->map);
+			r_list = NULL;
+		}
+	}
+
 	if (master->unique) {
 		drm_free(master->unique, master->unique_size, DRM_MEM_DRIVER);
 		master->unique = NULL;
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 62a4bf7..ee64b73 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -177,6 +177,14 @@
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
 
+	master_priv->sarea = drm_getsarea(dev);
+	if (master_priv->sarea) {
+		master_priv->sarea_priv = (drm_i915_sarea_t *)
+			((u8 *)master_priv->sarea->handle + init->sarea_priv_offset);
+	} else {
+		DRM_DEBUG("sarea not found assuming DRI2 userspace\n");
+	}
+
 	if (init->ring_size != 0) {
 		if (dev_priv->ring.ring_obj != NULL) {
 			i915_dma_cleanup(dev);
@@ -936,13 +944,14 @@
 	dev->mode_config.fb_base = drm_get_resource_start(dev, fb_bar) &
 		0xff000000;
 
-	DRM_DEBUG("*** fb base 0x%08lx\n", dev->mode_config.fb_base);
-
-	if (IS_MOBILE(dev) || (IS_I9XX(dev) && !IS_I965G(dev) && !IS_G33(dev)))
+	if (IS_MOBILE(dev) || IS_I9XX(dev))
 		dev_priv->cursor_needs_physical = true;
 	else
 		dev_priv->cursor_needs_physical = false;
 
+	if (IS_I965G(dev) || IS_G33(dev))
+		dev_priv->cursor_needs_physical = false;
+
 	ret = i915_probe_agp(dev, &agp_size, &prealloc_size);
 	if (ret)
 		goto kfree_devname;
@@ -1152,6 +1161,8 @@
 	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
 		intel_modeset_cleanup(dev);
 
+		i915_gem_free_all_phys_object(dev);
+
 		mutex_lock(&dev->struct_mutex);
 		i915_gem_cleanup_ringbuffer(dev);
 		mutex_unlock(&dev->struct_mutex);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 563de18..e1351825 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -72,6 +72,18 @@
 #define WATCH_INACTIVE	0
 #define WATCH_PWRITE	0
 
+#define I915_GEM_PHYS_CURSOR_0 1
+#define I915_GEM_PHYS_CURSOR_1 2
+#define I915_GEM_PHYS_OVERLAY_REGS 3
+#define I915_MAX_PHYS_OBJECT (I915_GEM_PHYS_OVERLAY_REGS)
+
+struct drm_i915_gem_phys_object {
+	int id;
+	struct page **page_list;
+	drm_dma_handle_t *handle;
+	struct drm_gem_object *cur_obj;
+};
+
 typedef struct _drm_i915_ring_buffer {
 	int tail_mask;
 	unsigned long Size;
@@ -358,6 +370,9 @@
 		uint32_t bit_6_swizzle_x;
 		/** Bit 6 swizzling required for Y tiling */
 		uint32_t bit_6_swizzle_y;
+
+		/* storage for physical objects */
+		struct drm_i915_gem_phys_object *phys_objs[I915_MAX_PHYS_OBJECT];
 	} mm;
 } drm_i915_private_t;
 
@@ -436,6 +451,9 @@
 	/** User space pin count and filp owning the pin */
 	uint32_t user_pin_count;
 	struct drm_file *pin_filp;
+
+	/** for phy allocated objects */
+	struct drm_i915_gem_phys_object *phys_obj;
 };
 
 /**
@@ -598,6 +616,11 @@
 int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf);
 int i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj,
 				      int write);
+int i915_gem_attach_phys_object(struct drm_device *dev,
+				struct drm_gem_object *obj, int id);
+void i915_gem_detach_phys_object(struct drm_device *dev,
+				 struct drm_gem_object *obj);
+void i915_gem_free_all_phys_object(struct drm_device *dev);
 
 /* i915_gem_tiling.c */
 void i915_gem_detect_bit_6_swizzle(struct drm_device *dev);
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 1384d66..debad5c 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -55,6 +55,9 @@
 static void i915_gem_object_get_fence_reg(struct drm_gem_object *obj);
 static void i915_gem_clear_fence_reg(struct drm_gem_object *obj);
 static int i915_gem_evict_something(struct drm_device *dev);
+static int i915_gem_phys_pwrite(struct drm_device *dev, struct drm_gem_object *obj,
+				struct drm_i915_gem_pwrite *args,
+				struct drm_file *file_priv);
 
 int i915_gem_do_init(struct drm_device *dev, unsigned long start,
 		     unsigned long end)
@@ -386,8 +389,10 @@
 	 * pread/pwrite currently are reading and writing from the CPU
 	 * perspective, requiring manual detiling by the client.
 	 */
-	if (obj_priv->tiling_mode == I915_TILING_NONE &&
-	    dev->gtt_total != 0)
+	if (obj_priv->phys_obj)
+		ret = i915_gem_phys_pwrite(dev, obj, args, file_priv);
+	else if (obj_priv->tiling_mode == I915_TILING_NONE &&
+		 dev->gtt_total != 0)
 		ret = i915_gem_gtt_pwrite(dev, obj, args, file_priv);
 	else
 		ret = i915_gem_shmem_pwrite(dev, obj, args, file_priv);
@@ -2858,6 +2863,9 @@
 	while (obj_priv->pin_count > 0)
 		i915_gem_object_unpin(obj);
 
+	if (obj_priv->phys_obj)
+		i915_gem_detach_phys_object(dev, obj);
+
 	i915_gem_object_unbind(obj);
 
 	list = &obj->map_list;
@@ -3293,3 +3301,180 @@
 
 	i915_gem_detect_bit_6_swizzle(dev);
 }
+
+/*
+ * Create a physically contiguous memory object for this object
+ * e.g. for cursor + overlay regs
+ */
+int i915_gem_init_phys_object(struct drm_device *dev,
+			      int id, int size)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_gem_phys_object *phys_obj;
+	int ret;
+
+	if (dev_priv->mm.phys_objs[id - 1] || !size)
+		return 0;
+
+	phys_obj = drm_calloc(1, sizeof(struct drm_i915_gem_phys_object), DRM_MEM_DRIVER);
+	if (!phys_obj)
+		return -ENOMEM;
+
+	phys_obj->id = id;
+
+	phys_obj->handle = drm_pci_alloc(dev, size, 0, 0xffffffff);
+	if (!phys_obj->handle) {
+		ret = -ENOMEM;
+		goto kfree_obj;
+	}
+#ifdef CONFIG_X86
+	set_memory_wc((unsigned long)phys_obj->handle->vaddr, phys_obj->handle->size / PAGE_SIZE);
+#endif
+
+	dev_priv->mm.phys_objs[id - 1] = phys_obj;
+
+	return 0;
+kfree_obj:
+	drm_free(phys_obj, sizeof(struct drm_i915_gem_phys_object), DRM_MEM_DRIVER);
+	return ret;
+}
+
+void i915_gem_free_phys_object(struct drm_device *dev, int id)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_gem_phys_object *phys_obj;
+
+	if (!dev_priv->mm.phys_objs[id - 1])
+		return;
+
+	phys_obj = dev_priv->mm.phys_objs[id - 1];
+	if (phys_obj->cur_obj) {
+		i915_gem_detach_phys_object(dev, phys_obj->cur_obj);
+	}
+
+#ifdef CONFIG_X86
+	set_memory_wb((unsigned long)phys_obj->handle->vaddr, phys_obj->handle->size / PAGE_SIZE);
+#endif
+	drm_pci_free(dev, phys_obj->handle);
+	kfree(phys_obj);
+	dev_priv->mm.phys_objs[id - 1] = NULL;
+}
+
+void i915_gem_free_all_phys_object(struct drm_device *dev)
+{
+	int i;
+
+	for (i = I915_GEM_PHYS_CURSOR_0; i <= I915_MAX_PHYS_OBJECT; i++)
+		i915_gem_free_phys_object(dev, i);
+}
+
+void i915_gem_detach_phys_object(struct drm_device *dev,
+				 struct drm_gem_object *obj)
+{
+	struct drm_i915_gem_object *obj_priv;
+	int i;
+	int ret;
+	int page_count;
+
+	obj_priv = obj->driver_private;
+	if (!obj_priv->phys_obj)
+		return;
+
+	ret = i915_gem_object_get_page_list(obj);
+	if (ret)
+		goto out;
+
+	page_count = obj->size / PAGE_SIZE;
+
+	for (i = 0; i < page_count; i++) {
+		char *dst = kmap_atomic(obj_priv->page_list[i], KM_USER0);
+		char *src = obj_priv->phys_obj->handle->vaddr + (i * PAGE_SIZE);
+
+		memcpy(dst, src, PAGE_SIZE);
+		kunmap_atomic(dst, KM_USER0);
+	}
+	drm_clflush_pages(obj_priv->page_list, page_count);
+	drm_agp_chipset_flush(dev);
+out:
+	obj_priv->phys_obj->cur_obj = NULL;
+	obj_priv->phys_obj = NULL;
+}
+
+int
+i915_gem_attach_phys_object(struct drm_device *dev,
+			    struct drm_gem_object *obj, int id)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_gem_object *obj_priv;
+	int ret = 0;
+	int page_count;
+	int i;
+
+	if (id > I915_MAX_PHYS_OBJECT)
+		return -EINVAL;
+
+	obj_priv = obj->driver_private;
+
+	if (obj_priv->phys_obj) {
+		if (obj_priv->phys_obj->id == id)
+			return 0;
+		i915_gem_detach_phys_object(dev, obj);
+	}
+
+
+	/* create a new object */
+	if (!dev_priv->mm.phys_objs[id - 1]) {
+		ret = i915_gem_init_phys_object(dev, id,
+						obj->size);
+		if (ret) {
+			DRM_ERROR("failed to init phys object %d size: %zu\n", id, obj->size);
+			goto out;
+		}
+	}
+
+	/* bind to the object */
+	obj_priv->phys_obj = dev_priv->mm.phys_objs[id - 1];
+	obj_priv->phys_obj->cur_obj = obj;
+
+	ret = i915_gem_object_get_page_list(obj);
+	if (ret) {
+		DRM_ERROR("failed to get page list\n");
+		goto out;
+	}
+
+	page_count = obj->size / PAGE_SIZE;
+
+	for (i = 0; i < page_count; i++) {
+		char *src = kmap_atomic(obj_priv->page_list[i], KM_USER0);
+		char *dst = obj_priv->phys_obj->handle->vaddr + (i * PAGE_SIZE);
+
+		memcpy(dst, src, PAGE_SIZE);
+		kunmap_atomic(src, KM_USER0);
+	}
+
+	return 0;
+out:
+	return ret;
+}
+
+static int
+i915_gem_phys_pwrite(struct drm_device *dev, struct drm_gem_object *obj,
+		     struct drm_i915_gem_pwrite *args,
+		     struct drm_file *file_priv)
+{
+	struct drm_i915_gem_object *obj_priv = obj->driver_private;
+	void *obj_addr;
+	int ret;
+	char __user *user_data;
+
+	user_data = (char __user *) (uintptr_t) args->data_ptr;
+	obj_addr = obj_priv->phys_obj->handle->vaddr + args->offset;
+
+	DRM_ERROR("obj_addr %p, %lld\n", obj_addr, args->size);
+	ret = copy_from_user(obj_addr, user_data, args->size);
+	if (ret)
+		return -EFAULT;
+
+	drm_agp_chipset_flush(dev);
+	return 0;
+}
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 0cadafb..6290219 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -411,6 +411,12 @@
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	unsigned long irqflags;
+	int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
+	u32 pipeconf;
+
+	pipeconf = I915_READ(pipeconf_reg);
+	if (!(pipeconf & PIPEACONF_ENABLE))
+		return -EINVAL;
 
 	spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
 	if (IS_I965G(dev))
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 8ccb9c3..31c3732 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -401,6 +401,8 @@
 	I915_WRITE(dspstride, crtc->fb->pitch);
 
 	dspcntr = I915_READ(dspcntr_reg);
+	/* Mask out pixel format bits in case we change it */
+	dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
 	switch (crtc->fb->bits_per_pixel) {
 	case 8:
 		dspcntr |= DISPPLANE_8BPP;
@@ -1014,21 +1016,25 @@
 
 	if (bo->size < width * height * 4) {
 		DRM_ERROR("buffer is to small\n");
-		drm_gem_object_unreference(bo);
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto fail;
 	}
 
-	if (dev_priv->cursor_needs_physical) {
-		addr = dev->agp->base + obj_priv->gtt_offset;
-	} else {
+	/* we only need to pin inside GTT if cursor is non-phy */
+	if (!dev_priv->cursor_needs_physical) {
+		ret = i915_gem_object_pin(bo, PAGE_SIZE);
+		if (ret) {
+			DRM_ERROR("failed to pin cursor bo\n");
+			goto fail;
+		}
 		addr = obj_priv->gtt_offset;
-	}
-
-	ret = i915_gem_object_pin(bo, PAGE_SIZE);
-	if (ret) {
-		DRM_ERROR("failed to pin cursor bo\n");
-		drm_gem_object_unreference(bo);
-		return ret;
+	} else {
+		ret = i915_gem_attach_phys_object(dev, bo, (pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1);
+		if (ret) {
+			DRM_ERROR("failed to attach phys object\n");
+			goto fail;
+		}
+		addr = obj_priv->phys_obj->handle->busaddr;
 	}
 
 	temp = 0;
@@ -1041,14 +1047,25 @@
 	I915_WRITE(base, addr);
 
 	if (intel_crtc->cursor_bo) {
-		i915_gem_object_unpin(intel_crtc->cursor_bo);
+		if (dev_priv->cursor_needs_physical) {
+			if (intel_crtc->cursor_bo != bo)
+				i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo);
+		} else
+			i915_gem_object_unpin(intel_crtc->cursor_bo);
+		mutex_lock(&dev->struct_mutex);
 		drm_gem_object_unreference(intel_crtc->cursor_bo);
+		mutex_unlock(&dev->struct_mutex);
 	}
 
 	intel_crtc->cursor_addr = addr;
 	intel_crtc->cursor_bo = bo;
 
 	return 0;
+fail:
+	mutex_lock(&dev->struct_mutex);
+	drm_gem_object_unreference(bo);
+	mutex_unlock(&dev->struct_mutex);
+	return ret;
 }
 
 static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index a5a2f53..5ee9d4c 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -137,10 +137,6 @@
 	chan->reg = reg;
 	snprintf(chan->adapter.name, I2C_NAME_SIZE, "intel drm %s", name);
 	chan->adapter.owner = THIS_MODULE;
-#ifndef I2C_HW_B_INTELFB
-#define I2C_HW_B_INTELFB I2C_HW_B_I810
-#endif
-	chan->adapter.id = I2C_HW_B_INTELFB;
 	chan->adapter.algo_data	= &chan->algo;
 	chan->adapter.dev.parent = &dev->pdev->dev;
 	chan->algo.setsda = set_data;
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index ccecfaf..6b1148f 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -340,6 +340,18 @@
 	kfree(connector);
 }
 
+static int intel_lvds_set_property(struct drm_connector *connector,
+				   struct drm_property *property,
+				   uint64_t value)
+{
+	struct drm_device *dev = connector->dev;
+
+	if (property == dev->mode_config.dpms_property && connector->encoder)
+		intel_lvds_dpms(connector->encoder, (uint32_t)(value & 0xf));
+
+	return 0;
+}
+
 static const struct drm_encoder_helper_funcs intel_lvds_helper_funcs = {
 	.dpms = intel_lvds_dpms,
 	.mode_fixup = intel_lvds_mode_fixup,
@@ -359,6 +371,7 @@
 	.restore = intel_lvds_restore,
 	.detect = intel_lvds_detect,
 	.fill_modes = drm_helper_probe_single_connector_modes,
+	.set_property = intel_lvds_set_property,
 	.destroy = intel_lvds_destroy,
 };
 
@@ -456,6 +469,13 @@
 		dev_priv->panel_fixed_mode =
 			drm_mode_duplicate(dev, dev_priv->vbt_mode);
 		mutex_unlock(&dev->mode_config.mutex);
+		if (dev_priv->panel_fixed_mode) {
+			dev_priv->panel_fixed_mode->type |=
+				DRM_MODE_TYPE_PREFERRED;
+			drm_mode_probed_add(connector,
+					    dev_priv->panel_fixed_mode);
+			goto out;
+		}
 	}
 
 	/*
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 4b33bc8..b84bf06 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -189,6 +189,16 @@
 	  This driver can also be built as a module. If so, the module
 	  will be called adt7473.
 
+config SENSORS_ADT7475
+	tristate "Analog Devices ADT7475"
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes here you get support for the Analog Devices
+	  ADT7475 hardware monitoring chips.
+
+	  This driver can also be build as a module.  If so, the module
+	  will be called adt7475.
+
 config SENSORS_K8TEMP
 	tristate "AMD Athlon64/FX or Opteron temperature sensor"
 	depends on X86 && PCI && EXPERIMENTAL
@@ -861,6 +871,8 @@
 config SENSORS_LIS3LV02D
 	tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer"
 	depends on ACPI && INPUT
+	select NEW_LEDS
+	select LEDS_CLASS
 	default n
 	help
 	  This driver provides support for the LIS3LV02Dx accelerometer. In
@@ -872,10 +884,16 @@
 	  /sys/devices/platform/lis3lv02d.
 
 	  This driver also provides an absolute input class device, allowing
-	  the laptop to act as a pinball machine-esque joystick.
+	  the laptop to act as a pinball machine-esque joystick. On HP laptops,
+	  if the led infrastructure is activated, support for a led indicating
+	  disk protection will be provided as hp:red:hddprotection.
 
-	  This driver can also be built as a module.  If so, the module
-	  will be called lis3lv02d.
+	  This driver can also be built as modules.  If so, the core module
+	  will be called lis3lv02d and a specific module for HP laptops will be
+	  called hp_accel.
+
+	  Say Y here if you have an applicable laptop and want to experience
+	  the awesome power of lis3lv02d.
 
 config SENSORS_APPLESMC
 	tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 19cb1ac..2e80f37 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -28,6 +28,8 @@
 obj-$(CONFIG_SENSORS_ADT7462)	+= adt7462.o
 obj-$(CONFIG_SENSORS_ADT7470)	+= adt7470.o
 obj-$(CONFIG_SENSORS_ADT7473)	+= adt7473.o
+obj-$(CONFIG_SENSORS_ADT7475)	+= adt7475.o
+
 obj-$(CONFIG_SENSORS_APPLESMC)	+= applesmc.o
 obj-$(CONFIG_SENSORS_AMS)	+= ams/
 obj-$(CONFIG_SENSORS_ATXP1)	+= atxp1.o
diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index 70bb854..e52b388 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -279,7 +279,7 @@
 		{ "OTES1 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0011, "AT8 32X(ATI RD580-ULI M1575)", {
+	{ 0x0011, "AT8 32X", {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 20, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -402,7 +402,7 @@
 		{ "AUX3 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0016, "AW9D-MAX       (Intel i975-ICH7)", {
+	{ 0x0016, "AW9D-MAX", {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR2",		 1, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		 2, 0, 10, 1, 0 },
@@ -482,7 +482,7 @@
 		{ "AUX3 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0019, NULL /* Unknown, need DMI string */, {
+	{ 0x0019, "IN9 32X MAX", {
 		{ "CPU Core",		 7, 0, 10, 1, 0 },
 		{ "DDR2",		13, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		14, 0, 10, 1, 0 },
@@ -509,7 +509,7 @@
 		{ "AUX3 FAN",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x001A, "IP35 Pro(Intel P35-ICH9R)", {
+	{ 0x001A, "IP35 Pro", {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR2",		 1, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		 2, 0, 10, 1, 0 },
@@ -1128,6 +1128,7 @@
 {
 	const char *board_vendor, *board_name;
 	int i, err = (force) ? 1 : -ENODEV;
+	size_t sublen;
 
 	board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
 	if (!board_vendor || strcmp(board_vendor, "http://www.abit.com.tw/"))
@@ -1137,9 +1138,20 @@
 	if (!board_name)
 		return err;
 
+	/* At the moment, we don't care about the part of the vendor
+	 * DMI string contained in brackets. Truncate the string at
+	 * the first occurrence of a bracket. Trim any trailing space
+	 * from the substring.
+	 */
+	sublen = strcspn(board_name, "(");
+	while (sublen > 0 && board_name[sublen - 1] == ' ')
+		sublen--;
+
 	for (i = 0; abituguru3_motherboards[i].id; i++) {
 		const char *dmi_name = abituguru3_motherboards[i].dmi_name;
-		if (dmi_name && !strcmp(dmi_name, board_name))
+		if (!dmi_name || strlen(dmi_name) != sublen)
+			continue;
+		if (!strncasecmp(board_name, dmi_name, sublen))
 			break;
 	}
 
@@ -1153,7 +1165,7 @@
 
 static inline int abituguru3_dmi_detect(void)
 {
-	return -ENODEV;
+	return 1;
 }
 
 #endif /* CONFIG_DMI */
diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
new file mode 100644
index 0000000..d39877a
--- /dev/null
+++ b/drivers/hwmon/adt7475.c
@@ -0,0 +1,1221 @@
+/*
+ * adt7475 - Thermal sensor driver for the ADT7475 chip and derivatives
+ * Copyright (C) 2007-2008, Advanced Micro Devices, Inc.
+ * Copyright (C) 2008 Jordan Crouse <jordan@cosmicpenguin.net>
+ * Copyright (C) 2008 Hans de Goede <hdegoede@redhat.com>
+
+ * Derived from the lm83 driver by Jean Delvare
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+
+/* Indexes for the sysfs hooks */
+
+#define INPUT		0
+#define MIN		1
+#define MAX		2
+#define CONTROL		3
+#define OFFSET		3
+#define AUTOMIN		4
+#define THERM		5
+#define HYSTERSIS	6
+
+/* These are unique identifiers for the sysfs functions - unlike the
+   numbers above, these are not also indexes into an array
+*/
+
+#define ALARM		9
+#define FAULT		10
+
+/* 7475 Common Registers */
+
+#define REG_VOLTAGE_BASE	0x21
+#define REG_TEMP_BASE		0x25
+#define REG_TACH_BASE		0x28
+#define REG_PWM_BASE		0x30
+#define REG_PWM_MAX_BASE	0x38
+
+#define REG_DEVID		0x3D
+#define REG_VENDID		0x3E
+
+#define REG_STATUS1		0x41
+#define REG_STATUS2		0x42
+
+#define REG_VOLTAGE_MIN_BASE	0x46
+#define REG_VOLTAGE_MAX_BASE	0x47
+
+#define REG_TEMP_MIN_BASE	0x4E
+#define REG_TEMP_MAX_BASE	0x4F
+
+#define REG_TACH_MIN_BASE	0x54
+
+#define REG_PWM_CONFIG_BASE	0x5C
+
+#define REG_TEMP_TRANGE_BASE	0x5F
+
+#define REG_PWM_MIN_BASE	0x64
+
+#define REG_TEMP_TMIN_BASE	0x67
+#define REG_TEMP_THERM_BASE	0x6A
+
+#define REG_REMOTE1_HYSTERSIS	0x6D
+#define REG_REMOTE2_HYSTERSIS	0x6E
+
+#define REG_TEMP_OFFSET_BASE	0x70
+
+#define REG_EXTEND1		0x76
+#define REG_EXTEND2		0x77
+#define REG_CONFIG5		0x7C
+
+#define CONFIG5_TWOSCOMP	0x01
+#define CONFIG5_TEMPOFFSET	0x02
+
+/* ADT7475 Settings */
+
+#define ADT7475_VOLTAGE_COUNT	2
+#define ADT7475_TEMP_COUNT	3
+#define ADT7475_TACH_COUNT	4
+#define ADT7475_PWM_COUNT	3
+
+/* Macro to read the registers */
+
+#define adt7475_read(reg) i2c_smbus_read_byte_data(client, (reg))
+
+/* Macros to easily index the registers */
+
+#define TACH_REG(idx) (REG_TACH_BASE + ((idx) * 2))
+#define TACH_MIN_REG(idx) (REG_TACH_MIN_BASE + ((idx) * 2))
+
+#define PWM_REG(idx) (REG_PWM_BASE + (idx))
+#define PWM_MAX_REG(idx) (REG_PWM_MAX_BASE + (idx))
+#define PWM_MIN_REG(idx) (REG_PWM_MIN_BASE + (idx))
+#define PWM_CONFIG_REG(idx) (REG_PWM_CONFIG_BASE + (idx))
+
+#define VOLTAGE_REG(idx) (REG_VOLTAGE_BASE + (idx))
+#define VOLTAGE_MIN_REG(idx) (REG_VOLTAGE_MIN_BASE + ((idx) * 2))
+#define VOLTAGE_MAX_REG(idx) (REG_VOLTAGE_MAX_BASE + ((idx) * 2))
+
+#define TEMP_REG(idx) (REG_TEMP_BASE + (idx))
+#define TEMP_MIN_REG(idx) (REG_TEMP_MIN_BASE + ((idx) * 2))
+#define TEMP_MAX_REG(idx) (REG_TEMP_MAX_BASE + ((idx) * 2))
+#define TEMP_TMIN_REG(idx) (REG_TEMP_TMIN_BASE + (idx))
+#define TEMP_THERM_REG(idx) (REG_TEMP_THERM_BASE + (idx))
+#define TEMP_OFFSET_REG(idx) (REG_TEMP_OFFSET_BASE + (idx))
+#define TEMP_TRANGE_REG(idx) (REG_TEMP_TRANGE_BASE + (idx))
+
+static unsigned short normal_i2c[] = { 0x2e, I2C_CLIENT_END };
+
+I2C_CLIENT_INSMOD_1(adt7475);
+
+static const struct i2c_device_id adt7475_id[] = {
+	{ "adt7475", adt7475 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, adt7475_id);
+
+struct adt7475_data {
+	struct device *hwmon_dev;
+	struct mutex lock;
+
+	unsigned long measure_updated;
+	unsigned long limits_updated;
+	char valid;
+
+	u8 config5;
+	u16 alarms;
+	u16 voltage[3][3];
+	u16 temp[7][3];
+	u16 tach[2][4];
+	u8 pwm[4][3];
+	u8 range[3];
+	u8 pwmctl[3];
+	u8 pwmchan[3];
+};
+
+static struct i2c_driver adt7475_driver;
+static struct adt7475_data *adt7475_update_device(struct device *dev);
+static void adt7475_read_hystersis(struct i2c_client *client);
+static void adt7475_read_pwm(struct i2c_client *client, int index);
+
+/* Given a temp value, convert it to register value */
+
+static inline u16 temp2reg(struct adt7475_data *data, long val)
+{
+	u16 ret;
+
+	if (!(data->config5 & CONFIG5_TWOSCOMP)) {
+		val = SENSORS_LIMIT(val, -64000, 191000);
+		ret = (val + 64500) / 1000;
+	} else {
+		val = SENSORS_LIMIT(val, -128000, 127000);
+		if (val < -500)
+			ret = (256500 + val) / 1000;
+		else
+			ret = (val + 500) / 1000;
+	}
+
+	return ret << 2;
+}
+
+/* Given a register value, convert it to a real temp value */
+
+static inline int reg2temp(struct adt7475_data *data, u16 reg)
+{
+	if (data->config5 & CONFIG5_TWOSCOMP) {
+		if (reg >= 512)
+			return (reg - 1024) * 250;
+		else
+			return reg * 250;
+	} else
+		return (reg - 256) * 250;
+}
+
+static inline int tach2rpm(u16 tach)
+{
+	if (tach == 0 || tach == 0xFFFF)
+		return 0;
+
+	return (90000 * 60) / tach;
+}
+
+static inline u16 rpm2tach(unsigned long rpm)
+{
+	if (rpm == 0)
+		return 0;
+
+	return SENSORS_LIMIT((90000 * 60) / rpm, 1, 0xFFFF);
+}
+
+static inline int reg2vcc(u16 reg)
+{
+	return (4296 * reg) / 1000;
+}
+
+static inline int reg2vccp(u16 reg)
+{
+	return (2929 * reg) / 1000;
+}
+
+static inline u16 vcc2reg(long vcc)
+{
+	vcc = SENSORS_LIMIT(vcc, 0, 4396);
+	return (vcc * 1000) / 4296;
+}
+
+static inline u16 vccp2reg(long vcc)
+{
+	vcc = SENSORS_LIMIT(vcc, 0, 2998);
+	return (vcc * 1000) / 2929;
+}
+
+static u16 adt7475_read_word(struct i2c_client *client, int reg)
+{
+	u16 val;
+
+	val = i2c_smbus_read_byte_data(client, reg);
+	val |= (i2c_smbus_read_byte_data(client, reg + 1) << 8);
+
+	return val;
+}
+
+static void adt7475_write_word(struct i2c_client *client, int reg, u16 val)
+{
+	i2c_smbus_write_byte_data(client, reg + 1, val >> 8);
+	i2c_smbus_write_byte_data(client, reg, val & 0xFF);
+}
+
+/* Find the nearest value in a table - used for pwm frequency and
+   auto temp range */
+static int find_nearest(long val, const int *array, int size)
+{
+	int i;
+
+	if (val < array[0])
+		return 0;
+
+	if (val > array[size - 1])
+		return size - 1;
+
+	for (i = 0; i < size - 1; i++) {
+		int a, b;
+
+		if (val > array[i + 1])
+			continue;
+
+		a = val - array[i];
+		b = array[i + 1] - val;
+
+		return (a <= b) ? i : i + 1;
+	}
+
+	return 0;
+}
+
+static ssize_t show_voltage(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct adt7475_data *data = adt7475_update_device(dev);
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	unsigned short val;
+
+	switch (sattr->nr) {
+	case ALARM:
+		return sprintf(buf, "%d\n",
+			       (data->alarms >> (sattr->index + 1)) & 1);
+	default:
+		val = data->voltage[sattr->nr][sattr->index];
+		return sprintf(buf, "%d\n",
+			       sattr->index ==
+			       0 ? reg2vccp(val) : reg2vcc(val));
+	}
+}
+
+static ssize_t set_voltage(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7475_data *data = i2c_get_clientdata(client);
+	unsigned char reg;
+	long val;
+
+	if (strict_strtol(buf, 10, &val))
+		return -EINVAL;
+
+	mutex_lock(&data->lock);
+
+	data->voltage[sattr->nr][sattr->index] =
+		sattr->index ? vcc2reg(val) : vccp2reg(val);
+
+	if (sattr->nr == MIN)
+		reg = VOLTAGE_MIN_REG(sattr->index);
+	else
+		reg = VOLTAGE_MAX_REG(sattr->index);
+
+	i2c_smbus_write_byte_data(client, reg,
+				  data->voltage[sattr->nr][sattr->index] >> 2);
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct adt7475_data *data = adt7475_update_device(dev);
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	int out;
+
+	switch (sattr->nr) {
+	case HYSTERSIS:
+		mutex_lock(&data->lock);
+		out = data->temp[sattr->nr][sattr->index];
+		if (sattr->index != 1)
+			out = (out >> 4) & 0xF;
+		else
+			out = (out & 0xF);
+		/* Show the value as an absolute number tied to
+		 * THERM */
+		out = reg2temp(data, data->temp[THERM][sattr->index]) -
+			out * 1000;
+		mutex_unlock(&data->lock);
+		break;
+
+	case OFFSET:
+		/* Offset is always 2's complement, regardless of the
+		 * setting in CONFIG5 */
+		mutex_lock(&data->lock);
+		out = (s8)data->temp[sattr->nr][sattr->index];
+		if (data->config5 & CONFIG5_TEMPOFFSET)
+			out *= 1000;
+		else
+			out *= 500;
+		mutex_unlock(&data->lock);
+		break;
+
+	case ALARM:
+		out = (data->alarms >> (sattr->index + 4)) & 1;
+		break;
+
+	case FAULT:
+		/* Note - only for remote1 and remote2 */
+		out = data->alarms & (sattr->index ? 0x8000 : 0x4000);
+		out = out ? 0 : 1;
+		break;
+
+	default:
+		/* All other temp values are in the configured format */
+		out = reg2temp(data, data->temp[sattr->nr][sattr->index]);
+	}
+
+	return sprintf(buf, "%d\n", out);
+}
+
+static ssize_t set_temp(struct device *dev, struct device_attribute *attr,
+			const char *buf, size_t count)
+{
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7475_data *data = i2c_get_clientdata(client);
+	unsigned char reg = 0;
+	u8 out;
+	int temp;
+	long val;
+
+	if (strict_strtol(buf, 10, &val))
+		return -EINVAL;
+
+	mutex_lock(&data->lock);
+
+	/* We need the config register in all cases for temp <-> reg conv. */
+	data->config5 = adt7475_read(REG_CONFIG5);
+
+	switch (sattr->nr) {
+	case OFFSET:
+		if (data->config5 & CONFIG5_TEMPOFFSET) {
+			val = SENSORS_LIMIT(val, -63000, 127000);
+			out = data->temp[OFFSET][sattr->index] = val / 1000;
+		} else {
+			val = SENSORS_LIMIT(val, -63000, 64000);
+			out = data->temp[OFFSET][sattr->index] = val / 500;
+		}
+		break;
+
+	case HYSTERSIS:
+		/* The value will be given as an absolute value, turn it
+		   into an offset based on THERM */
+
+		/* Read fresh THERM and HYSTERSIS values from the chip */
+		data->temp[THERM][sattr->index] =
+			adt7475_read(TEMP_THERM_REG(sattr->index)) << 2;
+		adt7475_read_hystersis(client);
+
+		temp = reg2temp(data, data->temp[THERM][sattr->index]);
+		val = SENSORS_LIMIT(val, temp - 15000, temp);
+		val = (temp - val) / 1000;
+
+		if (sattr->index != 1) {
+			data->temp[HYSTERSIS][sattr->index] &= 0xF0;
+			data->temp[HYSTERSIS][sattr->index] |= (val & 0xF) << 4;
+		} else {
+			data->temp[HYSTERSIS][sattr->index] &= 0x0F;
+			data->temp[HYSTERSIS][sattr->index] |= (val & 0xF);
+		}
+
+		out = data->temp[HYSTERSIS][sattr->index];
+		break;
+
+	default:
+		data->temp[sattr->nr][sattr->index] = temp2reg(data, val);
+
+		/* We maintain an extra 2 digits of precision for simplicity
+		 * - shift those back off before writing the value */
+		out = (u8) (data->temp[sattr->nr][sattr->index] >> 2);
+	}
+
+	switch (sattr->nr) {
+	case MIN:
+		reg = TEMP_MIN_REG(sattr->index);
+		break;
+	case MAX:
+		reg = TEMP_MAX_REG(sattr->index);
+		break;
+	case OFFSET:
+		reg = TEMP_OFFSET_REG(sattr->index);
+		break;
+	case AUTOMIN:
+		reg = TEMP_TMIN_REG(sattr->index);
+		break;
+	case THERM:
+		reg = TEMP_THERM_REG(sattr->index);
+		break;
+	case HYSTERSIS:
+		if (sattr->index != 2)
+			reg = REG_REMOTE1_HYSTERSIS;
+		else
+			reg = REG_REMOTE2_HYSTERSIS;
+
+		break;
+	}
+
+	i2c_smbus_write_byte_data(client, reg, out);
+
+	mutex_unlock(&data->lock);
+	return count;
+}
+
+/* Table of autorange values - the user will write the value in millidegrees,
+   and we'll convert it */
+static const int autorange_table[] = {
+	2000, 2500, 3330, 4000, 5000, 6670, 8000,
+	10000, 13330, 16000, 20000, 26670, 32000, 40000,
+	53330, 80000
+};
+
+static ssize_t show_point2(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct adt7475_data *data = adt7475_update_device(dev);
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	int out, val;
+
+	mutex_lock(&data->lock);
+	out = (data->range[sattr->index] >> 4) & 0x0F;
+	val = reg2temp(data, data->temp[AUTOMIN][sattr->index]);
+	mutex_unlock(&data->lock);
+
+	return sprintf(buf, "%d\n", val + autorange_table[out]);
+}
+
+static ssize_t set_point2(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7475_data *data = i2c_get_clientdata(client);
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	int temp;
+	long val;
+
+	if (strict_strtol(buf, 10, &val))
+		return -EINVAL;
+
+	mutex_lock(&data->lock);
+
+	/* Get a fresh copy of the needed registers */
+	data->config5 = adt7475_read(REG_CONFIG5);
+	data->temp[AUTOMIN][sattr->index] =
+		adt7475_read(TEMP_TMIN_REG(sattr->index)) << 2;
+	data->range[sattr->index] =
+		adt7475_read(TEMP_TRANGE_REG(sattr->index));
+
+	/* The user will write an absolute value, so subtract the start point
+	   to figure the range */
+	temp = reg2temp(data, data->temp[AUTOMIN][sattr->index]);
+	val = SENSORS_LIMIT(val, temp + autorange_table[0],
+		temp + autorange_table[ARRAY_SIZE(autorange_table) - 1]);
+	val -= temp;
+
+	/* Find the nearest table entry to what the user wrote */
+	val = find_nearest(val, autorange_table, ARRAY_SIZE(autorange_table));
+
+	data->range[sattr->index] &= ~0xF0;
+	data->range[sattr->index] |= val << 4;
+
+	i2c_smbus_write_byte_data(client, TEMP_TRANGE_REG(sattr->index),
+				  data->range[sattr->index]);
+
+	mutex_unlock(&data->lock);
+	return count;
+}
+
+static ssize_t show_tach(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct adt7475_data *data = adt7475_update_device(dev);
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	int out;
+
+	if (sattr->nr == ALARM)
+		out = (data->alarms >> (sattr->index + 10)) & 1;
+	else
+		out = tach2rpm(data->tach[sattr->nr][sattr->index]);
+
+	return sprintf(buf, "%d\n", out);
+}
+
+static ssize_t set_tach(struct device *dev, struct device_attribute *attr,
+			const char *buf, size_t count)
+{
+
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7475_data *data = i2c_get_clientdata(client);
+	unsigned long val;
+
+	if (strict_strtoul(buf, 10, &val))
+		return -EINVAL;
+
+	mutex_lock(&data->lock);
+
+	data->tach[MIN][sattr->index] = rpm2tach(val);
+
+	adt7475_write_word(client, TACH_MIN_REG(sattr->index),
+			   data->tach[MIN][sattr->index]);
+
+	mutex_unlock(&data->lock);
+	return count;
+}
+
+static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct adt7475_data *data = adt7475_update_device(dev);
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+
+	return sprintf(buf, "%d\n", data->pwm[sattr->nr][sattr->index]);
+}
+
+static ssize_t show_pwmchan(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct adt7475_data *data = adt7475_update_device(dev);
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+
+	return sprintf(buf, "%d\n", data->pwmchan[sattr->index]);
+}
+
+static ssize_t show_pwmctrl(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct adt7475_data *data = adt7475_update_device(dev);
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+
+	return sprintf(buf, "%d\n", data->pwmctl[sattr->index]);
+}
+
+static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
+		       const char *buf, size_t count)
+{
+
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7475_data *data = i2c_get_clientdata(client);
+	unsigned char reg = 0;
+	long val;
+
+	if (strict_strtol(buf, 10, &val))
+		return -EINVAL;
+
+	mutex_lock(&data->lock);
+
+	switch (sattr->nr) {
+	case INPUT:
+		/* Get a fresh value for CONTROL */
+		data->pwm[CONTROL][sattr->index] =
+			adt7475_read(PWM_CONFIG_REG(sattr->index));
+
+		/* If we are not in manual mode, then we shouldn't allow
+		 * the user to set the pwm speed */
+		if (((data->pwm[CONTROL][sattr->index] >> 5) & 7) != 7) {
+			mutex_unlock(&data->lock);
+			return count;
+		}
+
+		reg = PWM_REG(sattr->index);
+		break;
+
+	case MIN:
+		reg = PWM_MIN_REG(sattr->index);
+		break;
+
+	case MAX:
+		reg = PWM_MAX_REG(sattr->index);
+		break;
+	}
+
+	data->pwm[sattr->nr][sattr->index] = SENSORS_LIMIT(val, 0, 0xFF);
+	i2c_smbus_write_byte_data(client, reg,
+				  data->pwm[sattr->nr][sattr->index]);
+
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+/* Called by set_pwmctrl and set_pwmchan */
+
+static int hw_set_pwm(struct i2c_client *client, int index,
+		      unsigned int pwmctl, unsigned int pwmchan)
+{
+	struct adt7475_data *data = i2c_get_clientdata(client);
+	long val = 0;
+
+	switch (pwmctl) {
+	case 0:
+		val = 0x03;	/* Run at full speed */
+		break;
+	case 1:
+		val = 0x07;	/* Manual mode */
+		break;
+	case 2:
+		switch (pwmchan) {
+		case 1:
+			/* Remote1 controls PWM */
+			val = 0x00;
+			break;
+		case 2:
+			/* local controls PWM */
+			val = 0x01;
+			break;
+		case 4:
+			/* remote2 controls PWM */
+			val = 0x02;
+			break;
+		case 6:
+			/* local/remote2 control PWM */
+			val = 0x05;
+			break;
+		case 7:
+			/* All three control PWM */
+			val = 0x06;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	data->pwmctl[index] = pwmctl;
+	data->pwmchan[index] = pwmchan;
+
+	data->pwm[CONTROL][index] &= ~0xE0;
+	data->pwm[CONTROL][index] |= (val & 7) << 5;
+
+	i2c_smbus_write_byte_data(client, PWM_CONFIG_REG(index),
+				  data->pwm[CONTROL][index]);
+
+	return 0;
+}
+
+static ssize_t set_pwmchan(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7475_data *data = i2c_get_clientdata(client);
+	int r;
+	long val;
+
+	if (strict_strtol(buf, 10, &val))
+		return -EINVAL;
+
+	mutex_lock(&data->lock);
+	/* Read Modify Write PWM values */
+	adt7475_read_pwm(client, sattr->index);
+	r = hw_set_pwm(client, sattr->index, data->pwmctl[sattr->index], val);
+	if (r)
+		count = r;
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t set_pwmctrl(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7475_data *data = i2c_get_clientdata(client);
+	int r;
+	long val;
+
+	if (strict_strtol(buf, 10, &val))
+		return -EINVAL;
+
+	mutex_lock(&data->lock);
+	/* Read Modify Write PWM values */
+	adt7475_read_pwm(client, sattr->index);
+	r = hw_set_pwm(client, sattr->index, val, data->pwmchan[sattr->index]);
+	if (r)
+		count = r;
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+/* List of frequencies for the PWM */
+static const int pwmfreq_table[] = {
+	11, 14, 22, 29, 35, 44, 58, 88
+};
+
+static ssize_t show_pwmfreq(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct adt7475_data *data = adt7475_update_device(dev);
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+
+	return sprintf(buf, "%d\n",
+		       pwmfreq_table[data->range[sattr->index] & 7]);
+}
+
+static ssize_t set_pwmfreq(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7475_data *data = i2c_get_clientdata(client);
+	int out;
+	long val;
+
+	if (strict_strtol(buf, 10, &val))
+		return -EINVAL;
+
+	out = find_nearest(val, pwmfreq_table, ARRAY_SIZE(pwmfreq_table));
+
+	mutex_lock(&data->lock);
+
+	data->range[sattr->index] =
+		adt7475_read(TEMP_TRANGE_REG(sattr->index));
+	data->range[sattr->index] &= ~7;
+	data->range[sattr->index] |= out;
+
+	i2c_smbus_write_byte_data(client, TEMP_TRANGE_REG(sattr->index),
+				  data->range[sattr->index]);
+
+	mutex_unlock(&data->lock);
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, show_voltage, NULL, INPUT, 0);
+static SENSOR_DEVICE_ATTR_2(in1_max, S_IRUGO | S_IWUSR, show_voltage,
+			    set_voltage, MAX, 0);
+static SENSOR_DEVICE_ATTR_2(in1_min, S_IRUGO | S_IWUSR, show_voltage,
+			    set_voltage, MIN, 0);
+static SENSOR_DEVICE_ATTR_2(in1_alarm, S_IRUGO, show_voltage, NULL, ALARM, 0);
+static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO, show_voltage, NULL, INPUT, 1);
+static SENSOR_DEVICE_ATTR_2(in2_max, S_IRUGO | S_IWUSR, show_voltage,
+			    set_voltage, MAX, 1);
+static SENSOR_DEVICE_ATTR_2(in2_min, S_IRUGO | S_IWUSR, show_voltage,
+			    set_voltage, MIN, 1);
+static SENSOR_DEVICE_ATTR_2(in2_alarm, S_IRUGO, show_voltage, NULL, ALARM, 1);
+static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, INPUT, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_alarm, S_IRUGO, show_temp, NULL, ALARM, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_fault, S_IRUGO, show_temp, NULL, FAULT, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
+			    MAX, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_min, S_IRUGO | S_IWUSR, show_temp, set_temp,
+			    MIN, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_offset, S_IRUGO | S_IWUSR, show_temp,
+			    set_temp, OFFSET, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_auto_point1_temp, S_IRUGO | S_IWUSR,
+			    show_temp, set_temp, AUTOMIN, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_auto_point2_temp, S_IRUGO | S_IWUSR,
+			    show_point2, set_point2, 0, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
+			    THERM, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_crit_hyst, S_IRUGO | S_IWUSR, show_temp,
+			    set_temp, HYSTERSIS, 0);
+static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, INPUT, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_alarm, S_IRUGO, show_temp, NULL, ALARM, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
+			    MAX, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_min, S_IRUGO | S_IWUSR, show_temp, set_temp,
+			    MIN, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_offset, S_IRUGO | S_IWUSR, show_temp,
+			    set_temp, OFFSET, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_auto_point1_temp, S_IRUGO | S_IWUSR,
+			    show_temp, set_temp, AUTOMIN, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_auto_point2_temp, S_IRUGO | S_IWUSR,
+			    show_point2, set_point2, 0, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
+			    THERM, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_crit_hyst, S_IRUGO | S_IWUSR, show_temp,
+			    set_temp, HYSTERSIS, 1);
+static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, INPUT, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_alarm, S_IRUGO, show_temp, NULL, ALARM, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_fault, S_IRUGO, show_temp, NULL, FAULT, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
+			    MAX, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_min, S_IRUGO | S_IWUSR, show_temp, set_temp,
+			    MIN, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_offset, S_IRUGO | S_IWUSR, show_temp,
+			    set_temp, OFFSET, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_auto_point1_temp, S_IRUGO | S_IWUSR,
+			    show_temp, set_temp, AUTOMIN, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_auto_point2_temp, S_IRUGO | S_IWUSR,
+			    show_point2, set_point2, 0, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
+			    THERM, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_crit_hyst, S_IRUGO | S_IWUSR, show_temp,
+			    set_temp, HYSTERSIS, 2);
+static SENSOR_DEVICE_ATTR_2(fan1_input, S_IRUGO, show_tach, NULL, INPUT, 0);
+static SENSOR_DEVICE_ATTR_2(fan1_min, S_IRUGO | S_IWUSR, show_tach, set_tach,
+			    MIN, 0);
+static SENSOR_DEVICE_ATTR_2(fan1_alarm, S_IRUGO, show_tach, NULL, ALARM, 0);
+static SENSOR_DEVICE_ATTR_2(fan2_input, S_IRUGO, show_tach, NULL, INPUT, 1);
+static SENSOR_DEVICE_ATTR_2(fan2_min, S_IRUGO | S_IWUSR, show_tach, set_tach,
+			    MIN, 1);
+static SENSOR_DEVICE_ATTR_2(fan2_alarm, S_IRUGO, show_tach, NULL, ALARM, 1);
+static SENSOR_DEVICE_ATTR_2(fan3_input, S_IRUGO, show_tach, NULL, INPUT, 2);
+static SENSOR_DEVICE_ATTR_2(fan3_min, S_IRUGO | S_IWUSR, show_tach, set_tach,
+			    MIN, 2);
+static SENSOR_DEVICE_ATTR_2(fan3_alarm, S_IRUGO, show_tach, NULL, ALARM, 2);
+static SENSOR_DEVICE_ATTR_2(fan4_input, S_IRUGO, show_tach, NULL, INPUT, 3);
+static SENSOR_DEVICE_ATTR_2(fan4_min, S_IRUGO | S_IWUSR, show_tach, set_tach,
+			    MIN, 3);
+static SENSOR_DEVICE_ATTR_2(fan4_alarm, S_IRUGO, show_tach, NULL, ALARM, 3);
+static SENSOR_DEVICE_ATTR_2(pwm1, S_IRUGO | S_IWUSR, show_pwm, set_pwm, INPUT,
+			    0);
+static SENSOR_DEVICE_ATTR_2(pwm1_freq, S_IRUGO | S_IWUSR, show_pwmfreq,
+			    set_pwmfreq, INPUT, 0);
+static SENSOR_DEVICE_ATTR_2(pwm1_enable, S_IRUGO | S_IWUSR, show_pwmctrl,
+			    set_pwmctrl, INPUT, 0);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_channel_temp, S_IRUGO | S_IWUSR,
+			    show_pwmchan, set_pwmchan, INPUT, 0);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
+			    set_pwm, MIN, 0);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm,
+			    set_pwm, MAX, 0);
+static SENSOR_DEVICE_ATTR_2(pwm2, S_IRUGO | S_IWUSR, show_pwm, set_pwm, INPUT,
+			    1);
+static SENSOR_DEVICE_ATTR_2(pwm2_freq, S_IRUGO | S_IWUSR, show_pwmfreq,
+			    set_pwmfreq, INPUT, 1);
+static SENSOR_DEVICE_ATTR_2(pwm2_enable, S_IRUGO | S_IWUSR, show_pwmctrl,
+			    set_pwmctrl, INPUT, 1);
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_channel_temp, S_IRUGO | S_IWUSR,
+			    show_pwmchan, set_pwmchan, INPUT, 1);
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
+			    set_pwm, MIN, 1);
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm,
+			    set_pwm, MAX, 1);
+static SENSOR_DEVICE_ATTR_2(pwm3, S_IRUGO | S_IWUSR, show_pwm, set_pwm, INPUT,
+			    2);
+static SENSOR_DEVICE_ATTR_2(pwm3_freq, S_IRUGO | S_IWUSR, show_pwmfreq,
+			    set_pwmfreq, INPUT, 2);
+static SENSOR_DEVICE_ATTR_2(pwm3_enable, S_IRUGO | S_IWUSR, show_pwmctrl,
+			    set_pwmctrl, INPUT, 2);
+static SENSOR_DEVICE_ATTR_2(pwm3_auto_channel_temp, S_IRUGO | S_IWUSR,
+			    show_pwmchan, set_pwmchan, INPUT, 2);
+static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
+			    set_pwm, MIN, 2);
+static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm,
+			    set_pwm, MAX, 2);
+
+static struct attribute *adt7475_attrs[] = {
+	&sensor_dev_attr_in1_input.dev_attr.attr,
+	&sensor_dev_attr_in1_max.dev_attr.attr,
+	&sensor_dev_attr_in1_min.dev_attr.attr,
+	&sensor_dev_attr_in1_alarm.dev_attr.attr,
+	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_in2_max.dev_attr.attr,
+	&sensor_dev_attr_in2_min.dev_attr.attr,
+	&sensor_dev_attr_in2_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp1_fault.dev_attr.attr,
+	&sensor_dev_attr_temp1_max.dev_attr.attr,
+	&sensor_dev_attr_temp1_min.dev_attr.attr,
+	&sensor_dev_attr_temp1_offset.dev_attr.attr,
+	&sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_temp1_crit.dev_attr.attr,
+	&sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
+	&sensor_dev_attr_temp2_input.dev_attr.attr,
+	&sensor_dev_attr_temp2_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp2_max.dev_attr.attr,
+	&sensor_dev_attr_temp2_min.dev_attr.attr,
+	&sensor_dev_attr_temp2_offset.dev_attr.attr,
+	&sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_temp2_crit.dev_attr.attr,
+	&sensor_dev_attr_temp2_crit_hyst.dev_attr.attr,
+	&sensor_dev_attr_temp3_input.dev_attr.attr,
+	&sensor_dev_attr_temp3_fault.dev_attr.attr,
+	&sensor_dev_attr_temp3_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp3_max.dev_attr.attr,
+	&sensor_dev_attr_temp3_min.dev_attr.attr,
+	&sensor_dev_attr_temp3_offset.dev_attr.attr,
+	&sensor_dev_attr_temp3_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_temp3_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_temp3_crit.dev_attr.attr,
+	&sensor_dev_attr_temp3_crit_hyst.dev_attr.attr,
+	&sensor_dev_attr_fan1_input.dev_attr.attr,
+	&sensor_dev_attr_fan1_min.dev_attr.attr,
+	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan2_input.dev_attr.attr,
+	&sensor_dev_attr_fan2_min.dev_attr.attr,
+	&sensor_dev_attr_fan2_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan3_input.dev_attr.attr,
+	&sensor_dev_attr_fan3_min.dev_attr.attr,
+	&sensor_dev_attr_fan3_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan4_input.dev_attr.attr,
+	&sensor_dev_attr_fan4_min.dev_attr.attr,
+	&sensor_dev_attr_fan4_alarm.dev_attr.attr,
+	&sensor_dev_attr_pwm1.dev_attr.attr,
+	&sensor_dev_attr_pwm1_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_channel_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm2.dev_attr.attr,
+	&sensor_dev_attr_pwm2_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm2_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_channel_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm3.dev_attr.attr,
+	&sensor_dev_attr_pwm3_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm3_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_channel_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
+	NULL,
+};
+
+struct attribute_group adt7475_attr_group = { .attrs = adt7475_attrs };
+
+static int adt7475_detect(struct i2c_client *client, int kind,
+			  struct i2c_board_info *info)
+{
+	struct i2c_adapter *adapter = client->adapter;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+
+	if (kind <= 0) {
+		if (adt7475_read(REG_VENDID) != 0x41 ||
+		    adt7475_read(REG_DEVID) != 0x75) {
+			dev_err(&adapter->dev,
+				"Couldn't detect a adt7475 part at 0x%02x\n",
+				(unsigned int)client->addr);
+			return -ENODEV;
+		}
+	}
+
+	strlcpy(info->type, adt7475_id[0].name, I2C_NAME_SIZE);
+
+	return 0;
+}
+
+static int adt7475_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct adt7475_data *data;
+	int i, ret = 0;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (data == NULL)
+		return -ENOMEM;
+
+	mutex_init(&data->lock);
+	i2c_set_clientdata(client, data);
+
+	/* Call adt7475_read_pwm for all pwm's as this will reprogram any
+	   pwm's which are disabled to manual mode with 0% duty cycle */
+	for (i = 0; i < ADT7475_PWM_COUNT; i++)
+		adt7475_read_pwm(client, i);
+
+	ret = sysfs_create_group(&client->dev.kobj, &adt7475_attr_group);
+	if (ret)
+		goto efree;
+
+	data->hwmon_dev = hwmon_device_register(&client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		ret = PTR_ERR(data->hwmon_dev);
+		goto eremove;
+	}
+
+	return 0;
+
+eremove:
+	sysfs_remove_group(&client->dev.kobj, &adt7475_attr_group);
+efree:
+	kfree(data);
+	return ret;
+}
+
+static int adt7475_remove(struct i2c_client *client)
+{
+	struct adt7475_data *data = i2c_get_clientdata(client);
+
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_group(&client->dev.kobj, &adt7475_attr_group);
+	kfree(data);
+
+	return 0;
+}
+
+static struct i2c_driver adt7475_driver = {
+	.class		= I2C_CLASS_HWMON,
+	.driver = {
+		.name	= "adt7475",
+	},
+	.probe		= adt7475_probe,
+	.remove		= adt7475_remove,
+	.id_table	= adt7475_id,
+	.detect		= adt7475_detect,
+	.address_data	= &addr_data,
+};
+
+static void adt7475_read_hystersis(struct i2c_client *client)
+{
+	struct adt7475_data *data = i2c_get_clientdata(client);
+
+	data->temp[HYSTERSIS][0] = (u16) adt7475_read(REG_REMOTE1_HYSTERSIS);
+	data->temp[HYSTERSIS][1] = data->temp[HYSTERSIS][0];
+	data->temp[HYSTERSIS][2] = (u16) adt7475_read(REG_REMOTE2_HYSTERSIS);
+}
+
+static void adt7475_read_pwm(struct i2c_client *client, int index)
+{
+	struct adt7475_data *data = i2c_get_clientdata(client);
+	unsigned int v;
+
+	data->pwm[CONTROL][index] = adt7475_read(PWM_CONFIG_REG(index));
+
+	/* Figure out the internal value for pwmctrl and pwmchan
+	   based on the current settings */
+	v = (data->pwm[CONTROL][index] >> 5) & 7;
+
+	if (v == 3)
+		data->pwmctl[index] = 0;
+	else if (v == 7)
+		data->pwmctl[index] = 1;
+	else if (v == 4) {
+		/* The fan is disabled - we don't want to
+		   support that, so change to manual mode and
+		   set the duty cycle to 0 instead
+		*/
+		data->pwm[INPUT][index] = 0;
+		data->pwm[CONTROL][index] &= ~0xE0;
+		data->pwm[CONTROL][index] |= (7 << 5);
+
+		i2c_smbus_write_byte_data(client, PWM_CONFIG_REG(index),
+					  data->pwm[INPUT][index]);
+
+		i2c_smbus_write_byte_data(client, PWM_CONFIG_REG(index),
+					  data->pwm[CONTROL][index]);
+
+		data->pwmctl[index] = 1;
+	} else {
+		data->pwmctl[index] = 2;
+
+		switch (v) {
+		case 0:
+			data->pwmchan[index] = 1;
+			break;
+		case 1:
+			data->pwmchan[index] = 2;
+			break;
+		case 2:
+			data->pwmchan[index] = 4;
+			break;
+		case 5:
+			data->pwmchan[index] = 6;
+			break;
+		case 6:
+			data->pwmchan[index] = 7;
+			break;
+		}
+	}
+}
+
+static struct adt7475_data *adt7475_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7475_data *data = i2c_get_clientdata(client);
+	u8 ext;
+	int i;
+
+	mutex_lock(&data->lock);
+
+	/* Measurement values update every 2 seconds */
+	if (time_after(jiffies, data->measure_updated + HZ * 2) ||
+	    !data->valid) {
+		data->alarms = adt7475_read(REG_STATUS2) << 8;
+		data->alarms |= adt7475_read(REG_STATUS1);
+
+		ext = adt7475_read(REG_EXTEND1);
+		for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++)
+			data->voltage[INPUT][i] =
+				(adt7475_read(VOLTAGE_REG(i)) << 2) |
+				((ext >> ((i + 1) * 2)) & 3);
+
+		ext = adt7475_read(REG_EXTEND2);
+		for (i = 0; i < ADT7475_TEMP_COUNT; i++)
+			data->temp[INPUT][i] =
+				(adt7475_read(TEMP_REG(i)) << 2) |
+				((ext >> ((i + 1) * 2)) & 3);
+
+		for (i = 0; i < ADT7475_TACH_COUNT; i++)
+			data->tach[INPUT][i] =
+				adt7475_read_word(client, TACH_REG(i));
+
+		/* Updated by hw when in auto mode */
+		for (i = 0; i < ADT7475_PWM_COUNT; i++)
+			data->pwm[INPUT][i] = adt7475_read(PWM_REG(i));
+
+		data->measure_updated = jiffies;
+	}
+
+	/* Limits and settings, should never change update every 60 seconds */
+	if (time_after(jiffies, data->limits_updated + HZ * 2) ||
+	    !data->valid) {
+		data->config5 = adt7475_read(REG_CONFIG5);
+
+		for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++) {
+			/* Adjust values so they match the input precision */
+			data->voltage[MIN][i] =
+				adt7475_read(VOLTAGE_MIN_REG(i)) << 2;
+			data->voltage[MAX][i] =
+				adt7475_read(VOLTAGE_MAX_REG(i)) << 2;
+		}
+
+		for (i = 0; i < ADT7475_TEMP_COUNT; i++) {
+			/* Adjust values so they match the input precision */
+			data->temp[MIN][i] =
+				adt7475_read(TEMP_MIN_REG(i)) << 2;
+			data->temp[MAX][i] =
+				adt7475_read(TEMP_MAX_REG(i)) << 2;
+			data->temp[AUTOMIN][i] =
+				adt7475_read(TEMP_TMIN_REG(i)) << 2;
+			data->temp[THERM][i] =
+				adt7475_read(TEMP_THERM_REG(i)) << 2;
+			data->temp[OFFSET][i] =
+				adt7475_read(TEMP_OFFSET_REG(i));
+		}
+		adt7475_read_hystersis(client);
+
+		for (i = 0; i < ADT7475_TACH_COUNT; i++)
+			data->tach[MIN][i] =
+				adt7475_read_word(client, TACH_MIN_REG(i));
+
+		for (i = 0; i < ADT7475_PWM_COUNT; i++) {
+			data->pwm[MAX][i] = adt7475_read(PWM_MAX_REG(i));
+			data->pwm[MIN][i] = adt7475_read(PWM_MIN_REG(i));
+			/* Set the channel and control information */
+			adt7475_read_pwm(client, i);
+		}
+
+		data->range[0] = adt7475_read(TEMP_TRANGE_REG(0));
+		data->range[1] = adt7475_read(TEMP_TRANGE_REG(1));
+		data->range[2] = adt7475_read(TEMP_TRANGE_REG(2));
+
+		data->limits_updated = jiffies;
+		data->valid = 1;
+	}
+
+	mutex_unlock(&data->lock);
+
+	return data;
+}
+
+static int __init sensors_adt7475_init(void)
+{
+	return i2c_add_driver(&adt7475_driver);
+}
+
+static void __exit sensors_adt7475_exit(void)
+{
+	i2c_del_driver(&adt7475_driver);
+}
+
+MODULE_AUTHOR("Advanced Micro Devices, Inc");
+MODULE_DESCRIPTION("adt7475 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_adt7475_init);
+module_exit(sensors_adt7475_exit);
diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index dca47a5..e301862 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -590,6 +590,11 @@
 	}
 
 	ret = applesmc_read_key(LIGHT_SENSOR_LEFT_KEY, buffer, data_length);
+	/* newer macbooks report a single 10-bit bigendian value */
+	if (data_length == 10) {
+		left = be16_to_cpu(*(__be16 *)(buffer + 6)) >> 2;
+		goto out;
+	}
 	left = buffer[2];
 	if (ret)
 		goto out;
diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c
index bf8d405..0370524 100644
--- a/drivers/hwmon/hp_accel.c
+++ b/drivers/hwmon/hp_accel.c
@@ -3,7 +3,7 @@
  *
  *  Copyright (C) 2007-2008 Yan Burman
  *  Copyright (C) 2008 Eric Piel
- *  Copyright (C) 2008 Pavel Machek
+ *  Copyright (C) 2008-2009 Pavel Machek
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -36,6 +36,7 @@
 #include <linux/freezer.h>
 #include <linux/version.h>
 #include <linux/uaccess.h>
+#include <linux/leds.h>
 #include <acpi/acpi_drivers.h>
 #include <asm/atomic.h>
 #include "lis3lv02d.h"
@@ -43,6 +44,36 @@
 #define DRIVER_NAME     "lis3lv02d"
 #define ACPI_MDPS_CLASS "accelerometer"
 
+/* Delayed LEDs infrastructure ------------------------------------ */
+
+/* Special LED class that can defer work */
+struct delayed_led_classdev {
+	struct led_classdev led_classdev;
+	struct work_struct work;
+	enum led_brightness new_brightness;
+
+	unsigned int led;		/* For driver */
+	void (*set_brightness)(struct delayed_led_classdev *data, enum led_brightness value);
+};
+
+static inline void delayed_set_status_worker(struct work_struct *work)
+{
+	struct delayed_led_classdev *data =
+			container_of(work, struct delayed_led_classdev, work);
+
+	data->set_brightness(data, data->new_brightness);
+}
+
+static inline void delayed_sysfs_set(struct led_classdev *led_cdev,
+			      enum led_brightness brightness)
+{
+	struct delayed_led_classdev *data = container_of(led_cdev,
+			     struct delayed_led_classdev, led_classdev);
+	data->new_brightness = brightness;
+	schedule_work(&data->work);
+}
+
+/* HP-specific accelerometer driver ------------------------------------ */
 
 /* For automatic insertion of the module */
 static struct acpi_device_id lis3lv02d_device_ids[] = {
@@ -154,10 +185,33 @@
  */
 };
 
+static void hpled_set(struct delayed_led_classdev *led_cdev, enum led_brightness value)
+{
+	acpi_handle handle = adev.device->handle;
+	unsigned long long ret; /* Not used when writing */
+	union acpi_object in_obj[1];
+	struct acpi_object_list args = { 1, in_obj };
+
+	in_obj[0].type          = ACPI_TYPE_INTEGER;
+	in_obj[0].integer.value = !!value;
+
+	acpi_evaluate_integer(handle, "ALED", &args, &ret);
+}
+
+static struct delayed_led_classdev hpled_led = {
+	.led_classdev = {
+		.name			= "hp::hddprotect",
+		.default_trigger	= "none",
+		.brightness_set		= delayed_sysfs_set,
+		.flags                  = LED_CORE_SUSPENDRESUME,
+	},
+	.set_brightness = hpled_set,
+};
 
 static int lis3lv02d_add(struct acpi_device *device)
 {
 	u8 val;
+	int ret;
 
 	if (!device)
 		return -EINVAL;
@@ -183,7 +237,19 @@
 		adev.ac = lis3lv02d_axis_normal;
 	}
 
-	return lis3lv02d_init_device(&adev);
+	INIT_WORK(&hpled_led.work, delayed_set_status_worker);
+	ret = led_classdev_register(NULL, &hpled_led.led_classdev);
+	if (ret)
+		return ret;
+
+	ret = lis3lv02d_init_device(&adev);
+	if (ret) {
+		flush_work(&hpled_led.work);
+		led_classdev_unregister(&hpled_led.led_classdev);
+		return ret;
+	}
+
+	return ret;
 }
 
 static int lis3lv02d_remove(struct acpi_device *device, int type)
@@ -194,6 +260,9 @@
 	lis3lv02d_joystick_disable();
 	lis3lv02d_poweroff(device->handle);
 
+	flush_work(&hpled_led.work);
+	led_classdev_unregister(&hpled_led.led_classdev);
+
 	return lis3lv02d_remove_fs();
 }
 
@@ -256,7 +325,7 @@
 	acpi_bus_unregister_driver(&lis3lv02d_driver);
 }
 
-MODULE_DESCRIPTION("Glue between LIS3LV02Dx and HP ACPI BIOS");
+MODULE_DESCRIPTION("Glue between LIS3LV02Dx and HP ACPI BIOS and support for disk protection LED.");
 MODULE_AUTHOR("Yan Burman, Eric Piel, Pavel Machek");
 MODULE_LICENSE("GPL");
 
diff --git a/drivers/hwmon/k8temp.c b/drivers/hwmon/k8temp.c
index bd2bde0..1fe9951 100644
--- a/drivers/hwmon/k8temp.c
+++ b/drivers/hwmon/k8temp.c
@@ -31,6 +31,7 @@
 #include <linux/hwmon-sysfs.h>
 #include <linux/err.h>
 #include <linux/mutex.h>
+#include <asm/processor.h>
 
 #define TEMP_FROM_REG(val)	(((((val) >> 16) & 0xff) - 49) * 1000)
 #define REG_TEMP	0xe4
@@ -47,6 +48,8 @@
 	/* registers values */
 	u8 sensorsp;		/* sensor presence bits - SEL_CORE & SEL_PLACE */
 	u32 temp[2][2];		/* core, place */
+	u8 swap_core_select;    /* meaning of SEL_CORE is inverted */
+	u32 temp_offset;
 };
 
 static struct k8temp_data *k8temp_update_device(struct device *dev)
@@ -114,10 +117,15 @@
 	    to_sensor_dev_attr_2(devattr);
 	int core = attr->nr;
 	int place = attr->index;
+	int temp;
 	struct k8temp_data *data = k8temp_update_device(dev);
 
-	return sprintf(buf, "%d\n",
-		       TEMP_FROM_REG(data->temp[core][place]));
+	if (data->swap_core_select)
+		core = core ? 0 : 1;
+
+	temp = TEMP_FROM_REG(data->temp[core][place]) + data->temp_offset;
+
+	return sprintf(buf, "%d\n", temp);
 }
 
 /* core, place */
@@ -141,20 +149,49 @@
 	int err;
 	u8 scfg;
 	u32 temp;
+	u8 model, stepping;
 	struct k8temp_data *data;
-	u32 cpuid = cpuid_eax(1);
-
-	/* this feature should be available since SH-C0 core */
-	if ((cpuid == 0xf40) || (cpuid == 0xf50) || (cpuid == 0xf51)) {
-		err = -ENODEV;
-		goto exit;
-	}
 
 	if (!(data = kzalloc(sizeof(struct k8temp_data), GFP_KERNEL))) {
 		err = -ENOMEM;
 		goto exit;
 	}
 
+	model = boot_cpu_data.x86_model;
+	stepping = boot_cpu_data.x86_mask;
+
+	switch (boot_cpu_data.x86) {
+	case 0xf:
+		/* feature available since SH-C0, exclude older revisions */
+		if (((model == 4) && (stepping == 0)) ||
+		    ((model == 5) && (stepping <= 1))) {
+			err = -ENODEV;
+			goto exit_free;
+		}
+
+		/*
+		 * AMD NPT family 0fh, i.e. RevF and RevG:
+		 * meaning of SEL_CORE bit is inverted
+		 */
+		if (model >= 0x40) {
+			data->swap_core_select = 1;
+			dev_warn(&pdev->dev, "Temperature readouts might be "
+				 "wrong - check erratum #141\n");
+		}
+
+		if ((model >= 0x69) &&
+		    !(model == 0xc1 || model == 0x6c || model == 0x7c)) {
+			/*
+			 * RevG desktop CPUs (i.e. no socket S1G1 parts)
+			 * need additional offset, otherwise reported
+			 * temperature is below ambient temperature
+			 */
+			data->temp_offset = 21000;
+		}
+
+		break;
+	}
+
 	pci_read_config_byte(pdev, REG_TEMP, &scfg);
 	scfg &= ~(SEL_PLACE | SEL_CORE);		/* Select sensor 0, core0 */
 	pci_write_config_byte(pdev, REG_TEMP, scfg);
diff --git a/drivers/i2c/busses/i2c-acorn.c b/drivers/i2c/busses/i2c-acorn.c
index 75089fe..9fee3ca 100644
--- a/drivers/i2c/busses/i2c-acorn.c
+++ b/drivers/i2c/busses/i2c-acorn.c
@@ -83,7 +83,6 @@
 };
 
 static struct i2c_adapter ioc_ops = {
-	.id			= I2C_HW_B_IOC,
 	.algo_data		= &ioc_data,
 };
 
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index 9cead9b..981e080 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -476,7 +476,6 @@
 
 static struct i2c_adapter ali1535_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_ALI1535,
 	.class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c
index dd9e796..f70f465 100644
--- a/drivers/i2c/busses/i2c-ali1563.c
+++ b/drivers/i2c/busses/i2c-ali1563.c
@@ -386,7 +386,6 @@
 
 static struct i2c_adapter ali1563_adapter = {
 	.owner	= THIS_MODULE,
-	.id	= I2C_HW_SMBUS_ALI1563,
 	.class	= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo	= &ali1563_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
index 234fdde..39066de 100644
--- a/drivers/i2c/busses/i2c-ali15x3.c
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@@ -473,7 +473,6 @@
 
 static struct i2c_adapter ali15x3_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_ALI15X3,
 	.class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
index 36bee5b..220f4a1 100644
--- a/drivers/i2c/busses/i2c-amd756.c
+++ b/drivers/i2c/busses/i2c-amd756.c
@@ -298,7 +298,6 @@
 
 struct i2c_adapter amd756_smbus = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_AMD756,
 	.class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c
index 3972208..edab519 100644
--- a/drivers/i2c/busses/i2c-amd8111.c
+++ b/drivers/i2c/busses/i2c-amd8111.c
@@ -387,7 +387,6 @@
 	smbus->adapter.owner = THIS_MODULE;
 	snprintf(smbus->adapter.name, sizeof(smbus->adapter.name),
 		"SMBus2 AMD8111 adapter at %04x", smbus->base);
-	smbus->adapter.id = I2C_HW_SMBUS_AMD8111;
 	smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	smbus->adapter.algo = &smbus_algorithm;
 	smbus->adapter.algo_data = smbus;
diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c
index 66a04c2..f78ce52 100644
--- a/drivers/i2c/busses/i2c-au1550.c
+++ b/drivers/i2c/busses/i2c-au1550.c
@@ -400,7 +400,6 @@
 	priv->xfer_timeout = 200;
 	priv->ack_timeout = 200;
 
-	priv->adap.id = I2C_HW_AU1550_PSC;
 	priv->adap.nr = pdev->id;
 	priv->adap.algo = &au1550_algo;
 	priv->adap.algo_data = priv;
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
index 3fd2c41..fc548b3 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -651,7 +651,6 @@
 	iface->timeout_timer.data = (unsigned long)iface;
 
 	p_adap = &iface->adap;
-	p_adap->id = I2C_HW_BLACKFIN;
 	p_adap->nr = pdev->id;
 	strlcpy(p_adap->name, pdev->name, sizeof(p_adap->name));
 	p_adap->algo = &bfin_twi_algorithm;
diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c
index 0ed3ccb..448b4bf 100644
--- a/drivers/i2c/busses/i2c-elektor.c
+++ b/drivers/i2c/busses/i2c-elektor.c
@@ -202,7 +202,6 @@
 static struct i2c_adapter pcf_isa_ops = {
 	.owner		= THIS_MODULE,
 	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
-	.id		= I2C_HW_P_ELEK,
 	.algo_data	= &pcf_isa_data,
 	.name		= "i2c-elektor",
 };
diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c
index 648aa7b..bec9b84 100644
--- a/drivers/i2c/busses/i2c-hydra.c
+++ b/drivers/i2c/busses/i2c-hydra.c
@@ -102,7 +102,6 @@
 static struct i2c_adapter hydra_adap = {
 	.owner		= THIS_MODULE,
 	.name		= "Hydra i2c",
-	.id		= I2C_HW_B_HYDRA,
 	.algo_data	= &hydra_bit_data,
 };
 
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 526625e..230238d 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -556,7 +556,6 @@
 
 static struct i2c_adapter i801_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_I801,
 	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index 651f2f1..88f0db7 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -746,7 +746,6 @@
 	adap->dev.parent = &ofdev->dev;
 	strlcpy(adap->name, "IBM IIC", sizeof(adap->name));
 	i2c_set_adapdata(adap, dev);
-	adap->id = I2C_HW_OCP;
 	adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	adap->algo = &iic_algo;
 	adap->timeout = 1;
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index fc2714a..3190690 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -480,7 +480,6 @@
 	}
 
 	memcpy(new_adapter->name, pdev->name, strlen(pdev->name));
-	new_adapter->id = I2C_HW_IOP3XX;
 	new_adapter->owner = THIS_MODULE;
 	new_adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	new_adapter->dev.parent = &pdev->dev;
diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c
index 05d72e9..8e84679 100644
--- a/drivers/i2c/busses/i2c-ixp2000.c
+++ b/drivers/i2c/busses/i2c-ixp2000.c
@@ -116,7 +116,6 @@
 	drv_data->algo_data.udelay = 6;
 	drv_data->algo_data.timeout = 100;
 
-	drv_data->adapter.id = I2C_HW_B_IXP2000,
 	strlcpy(drv_data->adapter.name, plat_dev->dev.driver->name,
 		sizeof(drv_data->adapter.name));
 	drv_data->adapter.algo_data = &drv_data->algo_data,
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index a9a45fc..aedbbe6 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -310,7 +310,6 @@
 static struct i2c_adapter mpc_ops = {
 	.owner = THIS_MODULE,
 	.name = "MPC adapter",
-	.id = I2C_HW_MPC107,
 	.algo = &mpc_algo,
 	.timeout = 1,
 };
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 9e8118d..eeda276f 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -527,7 +527,6 @@
 		goto exit_unmap_regs;
 	}
 	drv_data->adapter.dev.parent = &pd->dev;
-	drv_data->adapter.id = I2C_HW_MV64XXX;
 	drv_data->adapter.algo = &mv64xxx_i2c_algo;
 	drv_data->adapter.owner = THIS_MODULE;
 	drv_data->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index 3b19bc4..05af6cd 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -355,7 +355,6 @@
 		return -EBUSY;
 	}
 	smbus->adapter.owner = THIS_MODULE;
-	smbus->adapter.id = I2C_HW_SMBUS_NFORCE2;
 	smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	smbus->adapter.algo = &smbus_algorithm;
 	smbus->adapter.algo_data = smbus;
diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c
index b2b8380..322c569 100644
--- a/drivers/i2c/busses/i2c-parport-light.c
+++ b/drivers/i2c/busses/i2c-parport-light.c
@@ -115,7 +115,6 @@
 static struct i2c_adapter parport_adapter = {
 	.owner		= THIS_MODULE,
 	.class		= I2C_CLASS_HWMON,
-	.id		= I2C_HW_B_LP,
 	.algo_data	= &parport_algo_data,
 	.name		= "Parallel port adapter (light)",
 };
diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c
index a257cd5..0d89986 100644
--- a/drivers/i2c/busses/i2c-parport.c
+++ b/drivers/i2c/busses/i2c-parport.c
@@ -164,7 +164,6 @@
 	/* Fill the rest of the structure */
 	adapter->adapter.owner = THIS_MODULE;
 	adapter->adapter.class = I2C_CLASS_HWMON;
-	adapter->adapter.id = I2C_HW_B_LP;
 	strlcpy(adapter->adapter.name, "Parallel port adapter",
 		sizeof(adapter->adapter.name));
 	adapter->algo_data = parport_algo_data;
diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c
index 9eb7626..4aa8138 100644
--- a/drivers/i2c/busses/i2c-pca-isa.c
+++ b/drivers/i2c/busses/i2c-pca-isa.c
@@ -101,7 +101,6 @@
 
 static struct i2c_adapter pca_isa_ops = {
 	.owner          = THIS_MODULE,
-	.id		= I2C_HW_A_ISA,
 	.algo_data	= &pca_isa_data,
 	.name		= "PCA9564 ISA Adapter",
 	.timeout	= 100,
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index eaa9b387..761f9dd 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -403,7 +403,6 @@
 
 static struct i2c_adapter piix4_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_PIIX4,
 	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c
index 4ddefbf..98b1ec4 100644
--- a/drivers/i2c/busses/i2c-sibyte.c
+++ b/drivers/i2c/busses/i2c-sibyte.c
@@ -155,7 +155,6 @@
 static struct i2c_adapter sibyte_board_adapter[2] = {
 	{
 		.owner		= THIS_MODULE,
-		.id		= I2C_HW_SIBYTE,
 		.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 		.algo		= NULL,
 		.algo_data	= &sibyte_board_data[0],
@@ -164,7 +163,6 @@
 	},
 	{
 		.owner		= THIS_MODULE,
-		.id		= I2C_HW_SIBYTE,
 		.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 		.algo		= NULL,
 		.algo_data	= &sibyte_board_data[1],
diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c
index 8ce2daf..f320ab2 100644
--- a/drivers/i2c/busses/i2c-sis5595.c
+++ b/drivers/i2c/busses/i2c-sis5595.c
@@ -365,7 +365,6 @@
 
 static struct i2c_adapter sis5595_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_SIS5595,
 	.class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c
index 9c9c016..50c3610 100644
--- a/drivers/i2c/busses/i2c-sis630.c
+++ b/drivers/i2c/busses/i2c-sis630.c
@@ -464,7 +464,6 @@
 
 static struct i2c_adapter sis630_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_SIS630,
 	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c
index f1bba63..7e1594b 100644
--- a/drivers/i2c/busses/i2c-sis96x.c
+++ b/drivers/i2c/busses/i2c-sis96x.c
@@ -241,7 +241,6 @@
 
 static struct i2c_adapter sis96x_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_SIS96X,
 	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c
index 29cef043..8b24f19 100644
--- a/drivers/i2c/busses/i2c-via.c
+++ b/drivers/i2c/busses/i2c-via.c
@@ -83,7 +83,6 @@
 
 static struct i2c_adapter vt586b_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_B_VIA,
 	.class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.name		= "VIA i2c",
 	.algo_data	= &bit_data,
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index 9f194d9..02e6f72 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -321,7 +321,6 @@
 
 static struct i2c_adapter vt596_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_VIA2,
 	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c
index 1d4ae26..1a474ac 100644
--- a/drivers/i2c/busses/i2c-voodoo3.c
+++ b/drivers/i2c/busses/i2c-voodoo3.c
@@ -163,7 +163,6 @@
 
 static struct i2c_adapter voodoo3_i2c_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_B_VOO,
 	.class		= I2C_CLASS_TV_ANALOG, 
 	.name		= "I2C Voodoo3/Banshee adapter",
 	.algo_data	= &voo_i2c_bit_data,
@@ -180,7 +179,6 @@
 
 static struct i2c_adapter voodoo3_ddc_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_B_VOO,
 	.class		= I2C_CLASS_DDC, 
 	.name		= "DDC Voodoo3/Banshee adapter",
 	.algo_data	= &voo_ddc_bit_data,
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index ed794b1..648ecc6 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -440,7 +440,6 @@
 	i2c_set_adapdata(adapter, iface);
 	snprintf(adapter->name, sizeof(adapter->name), "%s ACB%d", text, index);
 	adapter->owner = THIS_MODULE;
-	adapter->id = I2C_HW_SMBUS_SCX200;
 	adapter->algo = &scx200_acb_algorithm;
 	adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	adapter->dev.parent = dev;
diff --git a/drivers/i2c/busses/scx200_i2c.c b/drivers/i2c/busses/scx200_i2c.c
index e4c9853..162b74a 100644
--- a/drivers/i2c/busses/scx200_i2c.c
+++ b/drivers/i2c/busses/scx200_i2c.c
@@ -82,7 +82,6 @@
 static struct i2c_adapter scx200_i2c_ops = {
 	.owner		   = THIS_MODULE,
 	.class             = I2C_CLASS_HWMON | I2C_CLASS_SPD,
-	.id		   = I2C_HW_B_SCX200,
 	.algo_data	   = &scx200_i2c_data,
 	.name	= "NatSemi SCx200 I2C",
 };
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 59c3d23..c80312c 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -16,43 +16,6 @@
 	  This driver can also be built as a module.  If so, the module
 	  will be called ds1682.
 
-config AT24
-	tristate "EEPROMs from most vendors"
-	depends on SYSFS && EXPERIMENTAL
-	help
-	  Enable this driver to get read/write support to most I2C EEPROMs,
-	  after you configure the driver to know about each EEPROM on
-	  your target board.  Use these generic chip names, instead of
-	  vendor-specific ones like at24c64 or 24lc02:
-
-	     24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08,
-	     24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024
-
-	  Unless you like data loss puzzles, always be sure that any chip
-	  you configure as a 24c32 (32 kbit) or larger is NOT really a
-	  24c16 (16 kbit) or smaller, and vice versa. Marking the chip
-	  as read-only won't help recover from this. Also, if your chip
-	  has any software write-protect mechanism you may want to review the
-	  code to make sure this driver won't turn it on by accident.
-
-	  If you use this with an SMBus adapter instead of an I2C adapter,
-	  full functionality is not available.  Only smaller devices are
-	  supported (24c16 and below, max 4 kByte).
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called at24.
-
-config SENSORS_EEPROM
-	tristate "EEPROM reader"
-	depends on EXPERIMENTAL
-	help
-	  If you say yes here you get read-only access to the EEPROM data
-	  available on modern memory DIMMs and Sony Vaio laptops.  Such
-	  EEPROMs could theoretically be available on other devices as well.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called eeprom.
-
 config SENSORS_PCF8574
 	tristate "Philips PCF8574 and PCF8574A (DEPRECATED)"
 	depends on EXPERIMENTAL && GPIO_PCF857X = "n"
@@ -139,15 +102,4 @@
 	  This driver can also be built as a module.  If so, the module
 	  will be called tsl2550.
 
-config MCU_MPC8349EMITX
-	tristate "MPC8349E-mITX MCU driver"
-	depends on I2C && PPC_83xx
-	select GENERIC_GPIO
-	select ARCH_REQUIRE_GPIOLIB
-	help
-	  Say Y here to enable soft power-off functionality on the Freescale
-	  boards with the MPC8349E-mITX-compatible MCU chips. This driver will
-	  also register MCU GPIOs with the generic GPIO API, so you'll able
-	  to use MCU pins as GPIOs.
-
 endmenu
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index 83accaaf..d142f23 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -11,15 +11,12 @@
 #
 
 obj-$(CONFIG_DS1682)		+= ds1682.o
-obj-$(CONFIG_AT24)		+= at24.o
-obj-$(CONFIG_SENSORS_EEPROM)	+= eeprom.o
 obj-$(CONFIG_SENSORS_MAX6875)	+= max6875.o
 obj-$(CONFIG_SENSORS_PCA9539)	+= pca9539.o
 obj-$(CONFIG_SENSORS_PCF8574)	+= pcf8574.o
 obj-$(CONFIG_PCF8575)		+= pcf8575.o
 obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591.o
 obj-$(CONFIG_SENSORS_TSL2550)	+= tsl2550.o
-obj-$(CONFIG_MCU_MPC8349EMITX)	+= mcu_mpc8349emitx.o
 
 ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
 EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 3f95038..b1c6f68 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -701,11 +701,6 @@
        depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX
 endchoice
 
-config BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ
-       int "Maximum transfer size (KB) per request (up to 128)"
-       default "128"
-       depends on BLK_DEV_IDE_AU1XXX
-
 config BLK_DEV_IDE_TX4938
 	tristate "TX4938 internal IDE support"
 	depends on SOC_TX4938
diff --git a/drivers/ide/falconide.c b/drivers/ide/falconide.c
index a5ba820..a638e95 100644
--- a/drivers/ide/falconide.c
+++ b/drivers/ide/falconide.c
@@ -82,7 +82,7 @@
 
 static const struct ide_port_info falconide_port_info = {
 	.tp_ops			= &falconide_tp_ops,
-	.host_flags		= IDE_HFLAG_NO_DMA,
+	.host_flags		= IDE_HFLAG_NO_DMA | IDE_HFLAG_SERIALIZE,
 };
 
 static void __init falconide_setup_ports(hw_regs_t *hw)
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 4088a62..806760d 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -633,7 +633,7 @@
 	printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name,
 		q->max_sectors / 2);
 
-	if (ata_id_is_ssd(id) || ata_id_is_cfa(id))
+	if (ata_id_is_ssd(id))
 		queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q);
 
 	/* calculate drive capacity, and select LBA if possible */
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index e728cfe..753b92e 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -493,7 +493,7 @@
 	stat = tp_ops->read_status(hwif);
 
 	if (stat & ATA_BUSY) {
-		local_irq_save(flags);
+		local_save_flags(flags);
 		local_irq_enable_in_hardirq();
 		timeout += jiffies;
 		while ((stat = tp_ops->read_status(hwif)) & ATA_BUSY) {
diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c
index 4b3bf6a..60538d9 100644
--- a/drivers/ide/ide-pm.c
+++ b/drivers/ide/ide-pm.c
@@ -186,12 +186,10 @@
 	       blk_pm_suspend_request(rq) ? "suspend" : "resume");
 #endif
 	spin_lock_irqsave(q->queue_lock, flags);
-	if (blk_pm_suspend_request(rq)) {
+	if (blk_pm_suspend_request(rq))
 		blk_stop_queue(q);
-	} else {
+	else
 		drive->dev_flags &= ~IDE_DFLAG_BLOCKED;
-		blk_start_queue(q);
-	}
 	spin_unlock_irqrestore(q->queue_lock, flags);
 
 	drive->hwif->rq = NULL;
@@ -219,6 +217,8 @@
 		 * point.
 		 */
 		ide_hwif_t *hwif = drive->hwif;
+		struct request_queue *q = drive->queue;
+		unsigned long flags;
 		int rc;
 #ifdef DEBUG_PM
 		printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name);
@@ -231,5 +231,9 @@
 		rc = ide_wait_not_busy(hwif, 100000);
 		if (rc)
 			printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);
+
+		spin_lock_irqsave(q->queue_lock, flags);
+		blk_start_queue(q);
+		spin_unlock_irqrestore(q->queue_lock, flags);
 	}
 }
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 0ccbb44..0db1ed9 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -649,7 +649,8 @@
 	/* register with global device tree */
 	dev_set_name(&hwif->gendev, hwif->name);
 	hwif->gendev.driver_data = hwif;
-	hwif->gendev.parent = hwif->dev;
+	if (hwif->gendev.parent == NULL)
+		hwif->gendev.parent = hwif->dev;
 	hwif->gendev.release = hwif_release_dev;
 
 	ret = device_register(&hwif->gendev);
@@ -796,7 +797,7 @@
 	if (irqd)
 		disable_irq(hwif->irq);
 
-	local_irq_save(flags);
+	local_save_flags(flags);
 	local_irq_enable_in_hardirq();
 
 	if (ide_port_wait_ready(hwif) == -EBUSY)
diff --git a/drivers/ide/it821x.c b/drivers/ide/it821x.c
index 0be27ac..e1c4f54 100644
--- a/drivers/ide/it821x.c
+++ b/drivers/ide/it821x.c
@@ -68,6 +68,8 @@
 
 #define DRV_NAME "it821x"
 
+#define QUIRK_VORTEX86 1
+
 struct it821x_dev
 {
 	unsigned int smart:1,		/* Are we in smart raid mode */
@@ -79,6 +81,7 @@
 	u16	pio[2];			/* Cached PIO values */
 	u16	mwdma[2];		/* Cached MWDMA values */
 	u16	udma[2];		/* Cached UDMA values (per drive) */
+	u16	quirks;
 };
 
 #define ATA_66		0
@@ -557,8 +560,7 @@
 	 *	this is necessary.
 	 */
 
-	pci_read_config_byte(dev, 0x08, &conf);
-	if (conf == 0x10) {
+	if (dev->revision == 0x10) {
 		idev->timing10 = 1;
 		hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
 		if (idev->smart == 0)
@@ -577,6 +579,12 @@
 
 	hwif->ultra_mask = ATA_UDMA6;
 	hwif->mwdma_mask = ATA_MWDMA2;
+
+	/* Vortex86SX quirk: prevent Ultra-DMA mode to fix BadCRC issue */
+	if (idev->quirks & QUIRK_VORTEX86) {
+		if (dev->revision == 0x11)
+			hwif->ultra_mask = 0;
+	}
 }
 
 static void it8212_disable_raid(struct pci_dev *dev)
@@ -649,6 +657,8 @@
 		return -ENOMEM;
 	}
 
+	itdevs->quirks = id->driver_data;
+
 	rc = ide_pci_init_one(dev, &it821x_chipset, itdevs);
 	if (rc)
 		kfree(itdevs);
@@ -668,6 +678,7 @@
 static const struct pci_device_id it821x_pci_tbl[] = {
 	{ PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8211), 0 },
 	{ PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8212), 0 },
+	{ PCI_VDEVICE(RDC, PCI_DEVICE_ID_RDC_D1010), QUIRK_VORTEX86 },
 	{ 0, },
 };
 
diff --git a/drivers/ide/palm_bk3710.c b/drivers/ide/palm_bk3710.c
index a7ac490..f38aac7 100644
--- a/drivers/ide/palm_bk3710.c
+++ b/drivers/ide/palm_bk3710.c
@@ -346,7 +346,8 @@
 {
 	struct clk *clk;
 	struct resource *mem, *irq;
-	unsigned long base, rate;
+	void __iomem *base;
+	unsigned long rate;
 	int i, rc;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
 
@@ -382,11 +383,13 @@
 	base = IO_ADDRESS(mem->start);
 
 	/* Configure the Palm Chip controller */
-	palm_bk3710_chipinit((void __iomem *)base);
+	palm_bk3710_chipinit(base);
 
 	for (i = 0; i < IDE_NR_PORTS - 2; i++)
-		hw.io_ports_array[i] = base + IDE_PALM_ATA_PRI_REG_OFFSET + i;
-	hw.io_ports.ctl_addr = base + IDE_PALM_ATA_PRI_CTL_OFFSET;
+		hw.io_ports_array[i] = (unsigned long)
+				(base + IDE_PALM_ATA_PRI_REG_OFFSET + i);
+	hw.io_ports.ctl_addr = (unsigned long)
+			(base + IDE_PALM_ATA_PRI_CTL_OFFSET);
 	hw.irq = irq->start;
 	hw.dev = &pdev->dev;
 	hw.chipset = ide_palm3710;
diff --git a/drivers/ide/sl82c105.c b/drivers/ide/sl82c105.c
index 48cc748..6297956 100644
--- a/drivers/ide/sl82c105.c
+++ b/drivers/ide/sl82c105.c
@@ -310,10 +310,6 @@
 	.dma_ops	= &sl82c105_dma_ops,
 	.host_flags	= IDE_HFLAG_IO_32BIT |
 			  IDE_HFLAG_UNMASK_IRQS |
-/* FIXME: check for Compatibility mode in generic IDE PCI code */
-#if defined(CONFIG_LOPEC) || defined(CONFIG_SANDPOINT)
-			  IDE_HFLAG_FORCE_LEGACY_IRQS |
-#endif
 			  IDE_HFLAG_SERIALIZE_DMA |
 			  IDE_HFLAG_NO_AUTODMA,
 	.pio_mask	= ATA_PIO5,
diff --git a/drivers/ide/tx4938ide.c b/drivers/ide/tx4938ide.c
index b4ef218..d909534 100644
--- a/drivers/ide/tx4938ide.c
+++ b/drivers/ide/tx4938ide.c
@@ -202,7 +202,6 @@
 	.exec_command		= ide_exec_command,
 	.read_status		= ide_read_status,
 	.read_altstatus		= ide_read_altstatus,
-	.read_sff_dma_status	= ide_read_sff_dma_status,
 
 	.set_irq		= ide_set_irq,
 
diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c
index fecc0e0..703c3ee 100644
--- a/drivers/ide/via82cxxx.c
+++ b/drivers/ide/via82cxxx.c
@@ -432,8 +432,6 @@
 	if (via_clock < 20000 || via_clock > 50000) {
 		printk(KERN_WARNING DRV_NAME ": User given PCI clock speed "
 			"impossible (%d), using 33 MHz instead.\n", via_clock);
-		printk(KERN_WARNING DRV_NAME ": Use ide0=ata66 if you want "
-			"to assume 80-wire cable.\n");
 		via_clock = 33333;
 	}
 
diff --git a/drivers/ieee1394/pcilynx.c b/drivers/ieee1394/pcilynx.c
index dc15cad..38f7120 100644
--- a/drivers/ieee1394/pcilynx.c
+++ b/drivers/ieee1394/pcilynx.c
@@ -1419,7 +1419,6 @@
 		i2c_ad = kzalloc(sizeof(*i2c_ad), GFP_KERNEL);
         	if (!i2c_ad) FAIL("failed to allocate I2C adapter memory");
 
-		i2c_ad->id = I2C_HW_B_PCILYNX;
 		strlcpy(i2c_ad->name, "PCILynx I2C", sizeof(i2c_ad->name));
                 i2c_adapter_data = bit_data;
                 i2c_ad->algo_data = &i2c_adapter_data;
diff --git a/drivers/infiniband/hw/ehca/ehca_cq.c b/drivers/infiniband/hw/ehca/ehca_cq.c
index 2f4c28a..97e4b23 100644
--- a/drivers/infiniband/hw/ehca/ehca_cq.c
+++ b/drivers/infiniband/hw/ehca/ehca_cq.c
@@ -196,7 +196,7 @@
 
 	if (h_ret != H_SUCCESS) {
 		ehca_err(device, "hipz_h_alloc_resource_cq() failed "
-			 "h_ret=%li device=%p", h_ret, device);
+			 "h_ret=%lli device=%p", h_ret, device);
 		cq = ERR_PTR(ehca2ib_return_code(h_ret));
 		goto create_cq_exit2;
 	}
@@ -232,7 +232,7 @@
 
 		if (h_ret < H_SUCCESS) {
 			ehca_err(device, "hipz_h_register_rpage_cq() failed "
-				 "ehca_cq=%p cq_num=%x h_ret=%li counter=%i "
+				 "ehca_cq=%p cq_num=%x h_ret=%lli counter=%i "
 				 "act_pages=%i", my_cq, my_cq->cq_number,
 				 h_ret, counter, param.act_pages);
 			cq = ERR_PTR(-EINVAL);
@@ -244,7 +244,7 @@
 			if ((h_ret != H_SUCCESS) || vpage) {
 				ehca_err(device, "Registration of pages not "
 					 "complete ehca_cq=%p cq_num=%x "
-					 "h_ret=%li", my_cq, my_cq->cq_number,
+					 "h_ret=%lli", my_cq, my_cq->cq_number,
 					 h_ret);
 				cq = ERR_PTR(-EAGAIN);
 				goto create_cq_exit4;
@@ -252,7 +252,7 @@
 		} else {
 			if (h_ret != H_PAGE_REGISTERED) {
 				ehca_err(device, "Registration of page failed "
-					 "ehca_cq=%p cq_num=%x h_ret=%li "
+					 "ehca_cq=%p cq_num=%x h_ret=%lli "
 					 "counter=%i act_pages=%i",
 					 my_cq, my_cq->cq_number,
 					 h_ret, counter, param.act_pages);
@@ -266,7 +266,7 @@
 
 	gal = my_cq->galpas.kernel;
 	cqx_fec = hipz_galpa_load(gal, CQTEMM_OFFSET(cqx_fec));
-	ehca_dbg(device, "ehca_cq=%p cq_num=%x CQX_FEC=%lx",
+	ehca_dbg(device, "ehca_cq=%p cq_num=%x CQX_FEC=%llx",
 		 my_cq, my_cq->cq_number, cqx_fec);
 
 	my_cq->ib_cq.cqe = my_cq->nr_of_entries =
@@ -307,7 +307,7 @@
 	h_ret = hipz_h_destroy_cq(adapter_handle, my_cq, 1);
 	if (h_ret != H_SUCCESS)
 		ehca_err(device, "hipz_h_destroy_cq() failed ehca_cq=%p "
-			 "cq_num=%x h_ret=%li", my_cq, my_cq->cq_number, h_ret);
+			 "cq_num=%x h_ret=%lli", my_cq, my_cq->cq_number, h_ret);
 
 create_cq_exit2:
 	write_lock_irqsave(&ehca_cq_idr_lock, flags);
@@ -355,7 +355,7 @@
 	h_ret = hipz_h_destroy_cq(adapter_handle, my_cq, 0);
 	if (h_ret == H_R_STATE) {
 		/* cq in err: read err data and destroy it forcibly */
-		ehca_dbg(device, "ehca_cq=%p cq_num=%x ressource=%lx in err "
+		ehca_dbg(device, "ehca_cq=%p cq_num=%x resource=%llx in err "
 			 "state. Try to delete it forcibly.",
 			 my_cq, cq_num, my_cq->ipz_cq_handle.handle);
 		ehca_error_data(shca, my_cq, my_cq->ipz_cq_handle.handle);
@@ -365,7 +365,7 @@
 				 cq_num);
 	}
 	if (h_ret != H_SUCCESS) {
-		ehca_err(device, "hipz_h_destroy_cq() failed h_ret=%li "
+		ehca_err(device, "hipz_h_destroy_cq() failed h_ret=%lli "
 			 "ehca_cq=%p cq_num=%x", h_ret, my_cq, cq_num);
 		return ehca2ib_return_code(h_ret);
 	}
diff --git a/drivers/infiniband/hw/ehca/ehca_hca.c b/drivers/infiniband/hw/ehca/ehca_hca.c
index 4628822..9209c53 100644
--- a/drivers/infiniband/hw/ehca/ehca_hca.c
+++ b/drivers/infiniband/hw/ehca/ehca_hca.c
@@ -393,7 +393,7 @@
 	hret = hipz_h_modify_port(shca->ipz_hca_handle, port,
 				  cap, props->init_type, port_modify_mask);
 	if (hret != H_SUCCESS) {
-		ehca_err(&shca->ib_device, "Modify port failed  h_ret=%li",
+		ehca_err(&shca->ib_device, "Modify port failed  h_ret=%lli",
 			 hret);
 		ret = -EINVAL;
 	}
diff --git a/drivers/infiniband/hw/ehca/ehca_irq.c b/drivers/infiniband/hw/ehca/ehca_irq.c
index 3128a50..99bcbd7 100644
--- a/drivers/infiniband/hw/ehca/ehca_irq.c
+++ b/drivers/infiniband/hw/ehca/ehca_irq.c
@@ -99,7 +99,7 @@
 			return;
 
 		ehca_err(&shca->ib_device,
-			 "QP 0x%x (resource=%lx) has errors.",
+			 "QP 0x%x (resource=%llx) has errors.",
 			 qp->ib_qp.qp_num, resource);
 		break;
 	}
@@ -108,21 +108,21 @@
 		struct ehca_cq *cq = (struct ehca_cq *)data;
 
 		ehca_err(&shca->ib_device,
-			 "CQ 0x%x (resource=%lx) has errors.",
+			 "CQ 0x%x (resource=%llx) has errors.",
 			 cq->cq_number, resource);
 		break;
 	}
 	default:
 		ehca_err(&shca->ib_device,
-			 "Unknown error type: %lx on %s.",
+			 "Unknown error type: %llx on %s.",
 			 type, shca->ib_device.name);
 		break;
 	}
 
-	ehca_err(&shca->ib_device, "Error data is available: %lx.", resource);
+	ehca_err(&shca->ib_device, "Error data is available: %llx.", resource);
 	ehca_err(&shca->ib_device, "EHCA ----- error data begin "
 		 "---------------------------------------------------");
-	ehca_dmp(rblock, length, "resource=%lx", resource);
+	ehca_dmp(rblock, length, "resource=%llx", resource);
 	ehca_err(&shca->ib_device, "EHCA ----- error data end "
 		 "----------------------------------------------------");
 
@@ -152,7 +152,7 @@
 
 	if (ret == H_R_STATE)
 		ehca_err(&shca->ib_device,
-			 "No error data is available: %lx.", resource);
+			 "No error data is available: %llx.", resource);
 	else if (ret == H_SUCCESS) {
 		int length;
 
@@ -164,7 +164,7 @@
 		print_error_data(shca, data, rblock, length);
 	} else
 		ehca_err(&shca->ib_device,
-			 "Error data could not be fetched: %lx", resource);
+			 "Error data could not be fetched: %llx", resource);
 
 	ehca_free_fw_ctrlblock(rblock);
 
@@ -514,7 +514,7 @@
 	struct ehca_cq *cq;
 
 	eqe_value = eqe->entry;
-	ehca_dbg(&shca->ib_device, "eqe_value=%lx", eqe_value);
+	ehca_dbg(&shca->ib_device, "eqe_value=%llx", eqe_value);
 	if (EHCA_BMASK_GET(EQE_COMPLETION_EVENT, eqe_value)) {
 		ehca_dbg(&shca->ib_device, "Got completion event");
 		token = EHCA_BMASK_GET(EQE_CQ_TOKEN, eqe_value);
@@ -603,7 +603,7 @@
 		ret = hipz_h_eoi(eq->ist);
 		if (ret != H_SUCCESS)
 			ehca_err(&shca->ib_device,
-				 "bad return code EOI -rc = %ld\n", ret);
+				 "bad return code EOI -rc = %lld\n", ret);
 		ehca_dbg(&shca->ib_device, "deadman found %x eqe", eqe_cnt);
 	}
 	if (unlikely(eqe_cnt == EHCA_EQE_CACHE_SIZE))
diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c
index 3b77b67..368311c 100644
--- a/drivers/infiniband/hw/ehca/ehca_main.c
+++ b/drivers/infiniband/hw/ehca/ehca_main.c
@@ -304,7 +304,7 @@
 
 	h_ret = hipz_h_query_hca(shca->ipz_hca_handle, rblock);
 	if (h_ret != H_SUCCESS) {
-		ehca_gen_err("Cannot query device properties. h_ret=%li",
+		ehca_gen_err("Cannot query device properties. h_ret=%lli",
 			     h_ret);
 		ret = -EPERM;
 		goto sense_attributes1;
@@ -391,7 +391,7 @@
 	port = (struct hipz_query_port *)rblock;
 	h_ret = hipz_h_query_port(shca->ipz_hca_handle, 1, port);
 	if (h_ret != H_SUCCESS) {
-		ehca_gen_err("Cannot query port properties. h_ret=%li",
+		ehca_gen_err("Cannot query port properties. h_ret=%lli",
 			     h_ret);
 		ret = -EPERM;
 		goto sense_attributes1;
@@ -682,7 +682,7 @@
 {
 	struct ehca_shca *shca = dev->driver_data;
 
-	return sprintf(buf, "%lx\n", shca->ipz_hca_handle.handle);
+	return sprintf(buf, "%llx\n", shca->ipz_hca_handle.handle);
 
 }
 static DEVICE_ATTR(adapter_handle, S_IRUGO, ehca_show_adapter_handle, NULL);
@@ -955,7 +955,7 @@
 			struct ehca_eq *eq = &shca->eq;
 			int max = 3;
 			volatile u64 q_ofs, q_ofs2;
-			u64 flags;
+			unsigned long flags;
 			spin_lock_irqsave(&eq->spinlock, flags);
 			q_ofs = eq->ipz_queue.current_q_offset;
 			spin_unlock_irqrestore(&eq->spinlock, flags);
diff --git a/drivers/infiniband/hw/ehca/ehca_mcast.c b/drivers/infiniband/hw/ehca/ehca_mcast.c
index e3ef026..120aedf 100644
--- a/drivers/infiniband/hw/ehca/ehca_mcast.c
+++ b/drivers/infiniband/hw/ehca/ehca_mcast.c
@@ -88,7 +88,7 @@
 	if (h_ret != H_SUCCESS)
 		ehca_err(ibqp->device,
 			 "ehca_qp=%p qp_num=%x hipz_h_attach_mcqp() failed "
-			 "h_ret=%li", my_qp, ibqp->qp_num, h_ret);
+			 "h_ret=%lli", my_qp, ibqp->qp_num, h_ret);
 
 	return ehca2ib_return_code(h_ret);
 }
@@ -125,7 +125,7 @@
 	if (h_ret != H_SUCCESS)
 		ehca_err(ibqp->device,
 			 "ehca_qp=%p qp_num=%x hipz_h_detach_mcqp() failed "
-			 "h_ret=%li", my_qp, ibqp->qp_num, h_ret);
+			 "h_ret=%lli", my_qp, ibqp->qp_num, h_ret);
 
 	return ehca2ib_return_code(h_ret);
 }
diff --git a/drivers/infiniband/hw/ehca/ehca_mrmw.c b/drivers/infiniband/hw/ehca/ehca_mrmw.c
index f974367..72f83f7 100644
--- a/drivers/infiniband/hw/ehca/ehca_mrmw.c
+++ b/drivers/infiniband/hw/ehca/ehca_mrmw.c
@@ -204,7 +204,7 @@
 	}
 	if ((size == 0) ||
 	    (((u64)iova_start + size) < (u64)iova_start)) {
-		ehca_err(pd->device, "bad input values: size=%lx iova_start=%p",
+		ehca_err(pd->device, "bad input values: size=%llx iova_start=%p",
 			 size, iova_start);
 		ib_mr = ERR_PTR(-EINVAL);
 		goto reg_phys_mr_exit0;
@@ -309,8 +309,8 @@
 	}
 
 	if (length == 0 || virt + length < virt) {
-		ehca_err(pd->device, "bad input values: length=%lx "
-			 "virt_base=%lx", length, virt);
+		ehca_err(pd->device, "bad input values: length=%llx "
+			 "virt_base=%llx", length, virt);
 		ib_mr = ERR_PTR(-EINVAL);
 		goto reg_user_mr_exit0;
 	}
@@ -373,7 +373,7 @@
 			  &e_mr->ib.ib_mr.rkey);
 	if (ret == -EINVAL && pginfo.hwpage_size > PAGE_SIZE) {
 		ehca_warn(pd->device, "failed to register mr "
-			  "with hwpage_size=%lx", hwpage_size);
+			  "with hwpage_size=%llx", hwpage_size);
 		ehca_info(pd->device, "try to register mr with "
 			  "kpage_size=%lx", PAGE_SIZE);
 		/*
@@ -509,7 +509,7 @@
 			goto rereg_phys_mr_exit1;
 		if ((new_size == 0) ||
 		    (((u64)iova_start + new_size) < (u64)iova_start)) {
-			ehca_err(mr->device, "bad input values: new_size=%lx "
+			ehca_err(mr->device, "bad input values: new_size=%llx "
 				 "iova_start=%p", new_size, iova_start);
 			ret = -EINVAL;
 			goto rereg_phys_mr_exit1;
@@ -580,8 +580,8 @@
 
 	h_ret = hipz_h_query_mr(shca->ipz_hca_handle, e_mr, &hipzout);
 	if (h_ret != H_SUCCESS) {
-		ehca_err(mr->device, "hipz_mr_query failed, h_ret=%li mr=%p "
-			 "hca_hndl=%lx mr_hndl=%lx lkey=%x",
+		ehca_err(mr->device, "hipz_mr_query failed, h_ret=%lli mr=%p "
+			 "hca_hndl=%llx mr_hndl=%llx lkey=%x",
 			 h_ret, mr, shca->ipz_hca_handle.handle,
 			 e_mr->ipz_mr_handle.handle, mr->lkey);
 		ret = ehca2ib_return_code(h_ret);
@@ -630,8 +630,8 @@
 	/* TODO: BUSY: MR still has bound window(s) */
 	h_ret = hipz_h_free_resource_mr(shca->ipz_hca_handle, e_mr);
 	if (h_ret != H_SUCCESS) {
-		ehca_err(mr->device, "hipz_free_mr failed, h_ret=%li shca=%p "
-			 "e_mr=%p hca_hndl=%lx mr_hndl=%lx mr->lkey=%x",
+		ehca_err(mr->device, "hipz_free_mr failed, h_ret=%lli shca=%p "
+			 "e_mr=%p hca_hndl=%llx mr_hndl=%llx mr->lkey=%x",
 			 h_ret, shca, e_mr, shca->ipz_hca_handle.handle,
 			 e_mr->ipz_mr_handle.handle, mr->lkey);
 		ret = ehca2ib_return_code(h_ret);
@@ -671,8 +671,8 @@
 	h_ret = hipz_h_alloc_resource_mw(shca->ipz_hca_handle, e_mw,
 					 e_pd->fw_pd, &hipzout);
 	if (h_ret != H_SUCCESS) {
-		ehca_err(pd->device, "hipz_mw_allocate failed, h_ret=%li "
-			 "shca=%p hca_hndl=%lx mw=%p",
+		ehca_err(pd->device, "hipz_mw_allocate failed, h_ret=%lli "
+			 "shca=%p hca_hndl=%llx mw=%p",
 			 h_ret, shca, shca->ipz_hca_handle.handle, e_mw);
 		ib_mw = ERR_PTR(ehca2ib_return_code(h_ret));
 		goto alloc_mw_exit1;
@@ -713,8 +713,8 @@
 
 	h_ret = hipz_h_free_resource_mw(shca->ipz_hca_handle, e_mw);
 	if (h_ret != H_SUCCESS) {
-		ehca_err(mw->device, "hipz_free_mw failed, h_ret=%li shca=%p "
-			 "mw=%p rkey=%x hca_hndl=%lx mw_hndl=%lx",
+		ehca_err(mw->device, "hipz_free_mw failed, h_ret=%lli shca=%p "
+			 "mw=%p rkey=%x hca_hndl=%llx mw_hndl=%llx",
 			 h_ret, shca, mw, mw->rkey, shca->ipz_hca_handle.handle,
 			 e_mw->ipz_mw_handle.handle);
 		return ehca2ib_return_code(h_ret);
@@ -840,7 +840,7 @@
 		goto map_phys_fmr_exit0;
 	if (iova % e_fmr->fmr_page_size) {
 		/* only whole-numbered pages */
-		ehca_err(fmr->device, "bad iova, iova=%lx fmr_page_size=%x",
+		ehca_err(fmr->device, "bad iova, iova=%llx fmr_page_size=%x",
 			 iova, e_fmr->fmr_page_size);
 		ret = -EINVAL;
 		goto map_phys_fmr_exit0;
@@ -878,7 +878,7 @@
 map_phys_fmr_exit0:
 	if (ret)
 		ehca_err(fmr->device, "ret=%i fmr=%p page_list=%p list_len=%x "
-			 "iova=%lx", ret, fmr, page_list, list_len, iova);
+			 "iova=%llx", ret, fmr, page_list, list_len, iova);
 	return ret;
 } /* end ehca_map_phys_fmr() */
 
@@ -964,8 +964,8 @@
 
 	h_ret = hipz_h_free_resource_mr(shca->ipz_hca_handle, e_fmr);
 	if (h_ret != H_SUCCESS) {
-		ehca_err(fmr->device, "hipz_free_mr failed, h_ret=%li e_fmr=%p "
-			 "hca_hndl=%lx fmr_hndl=%lx fmr->lkey=%x",
+		ehca_err(fmr->device, "hipz_free_mr failed, h_ret=%lli e_fmr=%p "
+			 "hca_hndl=%llx fmr_hndl=%llx fmr->lkey=%x",
 			 h_ret, e_fmr, shca->ipz_hca_handle.handle,
 			 e_fmr->ipz_mr_handle.handle, fmr->lkey);
 		ret = ehca2ib_return_code(h_ret);
@@ -1007,8 +1007,8 @@
 					 (u64)iova_start, size, hipz_acl,
 					 e_pd->fw_pd, &hipzout);
 	if (h_ret != H_SUCCESS) {
-		ehca_err(&shca->ib_device, "hipz_alloc_mr failed, h_ret=%li "
-			 "hca_hndl=%lx", h_ret, shca->ipz_hca_handle.handle);
+		ehca_err(&shca->ib_device, "hipz_alloc_mr failed, h_ret=%lli "
+			 "hca_hndl=%llx", h_ret, shca->ipz_hca_handle.handle);
 		ret = ehca2ib_return_code(h_ret);
 		goto ehca_reg_mr_exit0;
 	}
@@ -1033,9 +1033,9 @@
 ehca_reg_mr_exit1:
 	h_ret = hipz_h_free_resource_mr(shca->ipz_hca_handle, e_mr);
 	if (h_ret != H_SUCCESS) {
-		ehca_err(&shca->ib_device, "h_ret=%li shca=%p e_mr=%p "
-			 "iova_start=%p size=%lx acl=%x e_pd=%p lkey=%x "
-			 "pginfo=%p num_kpages=%lx num_hwpages=%lx ret=%i",
+		ehca_err(&shca->ib_device, "h_ret=%lli shca=%p e_mr=%p "
+			 "iova_start=%p size=%llx acl=%x e_pd=%p lkey=%x "
+			 "pginfo=%p num_kpages=%llx num_hwpages=%llx ret=%i",
 			 h_ret, shca, e_mr, iova_start, size, acl, e_pd,
 			 hipzout.lkey, pginfo, pginfo->num_kpages,
 			 pginfo->num_hwpages, ret);
@@ -1045,8 +1045,8 @@
 ehca_reg_mr_exit0:
 	if (ret)
 		ehca_err(&shca->ib_device, "ret=%i shca=%p e_mr=%p "
-			 "iova_start=%p size=%lx acl=%x e_pd=%p pginfo=%p "
-			 "num_kpages=%lx num_hwpages=%lx",
+			 "iova_start=%p size=%llx acl=%x e_pd=%p pginfo=%p "
+			 "num_kpages=%llx num_hwpages=%llx",
 			 ret, shca, e_mr, iova_start, size, acl, e_pd, pginfo,
 			 pginfo->num_kpages, pginfo->num_hwpages);
 	return ret;
@@ -1116,8 +1116,8 @@
 			 */
 			if (h_ret != H_SUCCESS) {
 				ehca_err(&shca->ib_device, "last "
-					 "hipz_reg_rpage_mr failed, h_ret=%li "
-					 "e_mr=%p i=%x hca_hndl=%lx mr_hndl=%lx"
+					 "hipz_reg_rpage_mr failed, h_ret=%lli "
+					 "e_mr=%p i=%x hca_hndl=%llx mr_hndl=%llx"
 					 " lkey=%x", h_ret, e_mr, i,
 					 shca->ipz_hca_handle.handle,
 					 e_mr->ipz_mr_handle.handle,
@@ -1128,8 +1128,8 @@
 				ret = 0;
 		} else if (h_ret != H_PAGE_REGISTERED) {
 			ehca_err(&shca->ib_device, "hipz_reg_rpage_mr failed, "
-				 "h_ret=%li e_mr=%p i=%x lkey=%x hca_hndl=%lx "
-				 "mr_hndl=%lx", h_ret, e_mr, i,
+				 "h_ret=%lli e_mr=%p i=%x lkey=%x hca_hndl=%llx "
+				 "mr_hndl=%llx", h_ret, e_mr, i,
 				 e_mr->ib.ib_mr.lkey,
 				 shca->ipz_hca_handle.handle,
 				 e_mr->ipz_mr_handle.handle);
@@ -1145,7 +1145,7 @@
 ehca_reg_mr_rpages_exit0:
 	if (ret)
 		ehca_err(&shca->ib_device, "ret=%i shca=%p e_mr=%p pginfo=%p "
-			 "num_kpages=%lx num_hwpages=%lx", ret, shca, e_mr,
+			 "num_kpages=%llx num_hwpages=%llx", ret, shca, e_mr,
 			 pginfo, pginfo->num_kpages, pginfo->num_hwpages);
 	return ret;
 } /* end ehca_reg_mr_rpages() */
@@ -1184,7 +1184,7 @@
 	ret = ehca_set_pagebuf(pginfo, pginfo->num_hwpages, kpage);
 	if (ret) {
 		ehca_err(&shca->ib_device, "set pagebuf failed, e_mr=%p "
-			 "pginfo=%p type=%x num_kpages=%lx num_hwpages=%lx "
+			 "pginfo=%p type=%x num_kpages=%llx num_hwpages=%llx "
 			 "kpage=%p", e_mr, pginfo, pginfo->type,
 			 pginfo->num_kpages, pginfo->num_hwpages, kpage);
 		goto ehca_rereg_mr_rereg1_exit1;
@@ -1205,13 +1205,13 @@
 		 * (MW bound or MR is shared)
 		 */
 		ehca_warn(&shca->ib_device, "hipz_h_reregister_pmr failed "
-			  "(Rereg1), h_ret=%li e_mr=%p", h_ret, e_mr);
+			  "(Rereg1), h_ret=%lli e_mr=%p", h_ret, e_mr);
 		*pginfo = pginfo_save;
 		ret = -EAGAIN;
 	} else if ((u64 *)hipzout.vaddr != iova_start) {
 		ehca_err(&shca->ib_device, "PHYP changed iova_start in "
-			 "rereg_pmr, iova_start=%p iova_start_out=%lx e_mr=%p "
-			 "mr_handle=%lx lkey=%x lkey_out=%x", iova_start,
+			 "rereg_pmr, iova_start=%p iova_start_out=%llx e_mr=%p "
+			 "mr_handle=%llx lkey=%x lkey_out=%x", iova_start,
 			 hipzout.vaddr, e_mr, e_mr->ipz_mr_handle.handle,
 			 e_mr->ib.ib_mr.lkey, hipzout.lkey);
 		ret = -EFAULT;
@@ -1235,7 +1235,7 @@
 ehca_rereg_mr_rereg1_exit0:
 	if ( ret && (ret != -EAGAIN) )
 		ehca_err(&shca->ib_device, "ret=%i lkey=%x rkey=%x "
-			 "pginfo=%p num_kpages=%lx num_hwpages=%lx",
+			 "pginfo=%p num_kpages=%llx num_hwpages=%llx",
 			 ret, *lkey, *rkey, pginfo, pginfo->num_kpages,
 			 pginfo->num_hwpages);
 	return ret;
@@ -1263,7 +1263,7 @@
 	    (e_mr->num_hwpages > MAX_RPAGES) ||
 	    (pginfo->num_hwpages > e_mr->num_hwpages)) {
 		ehca_dbg(&shca->ib_device, "Rereg3 case, "
-			 "pginfo->num_hwpages=%lx e_mr->num_hwpages=%x",
+			 "pginfo->num_hwpages=%llx e_mr->num_hwpages=%x",
 			 pginfo->num_hwpages, e_mr->num_hwpages);
 		rereg_1_hcall = 0;
 		rereg_3_hcall = 1;
@@ -1295,7 +1295,7 @@
 		h_ret = hipz_h_free_resource_mr(shca->ipz_hca_handle, e_mr);
 		if (h_ret != H_SUCCESS) {
 			ehca_err(&shca->ib_device, "hipz_free_mr failed, "
-				 "h_ret=%li e_mr=%p hca_hndl=%lx mr_hndl=%lx "
+				 "h_ret=%lli e_mr=%p hca_hndl=%llx mr_hndl=%llx "
 				 "mr->lkey=%x",
 				 h_ret, e_mr, shca->ipz_hca_handle.handle,
 				 e_mr->ipz_mr_handle.handle,
@@ -1328,8 +1328,8 @@
 ehca_rereg_mr_exit0:
 	if (ret)
 		ehca_err(&shca->ib_device, "ret=%i shca=%p e_mr=%p "
-			 "iova_start=%p size=%lx acl=%x e_pd=%p pginfo=%p "
-			 "num_kpages=%lx lkey=%x rkey=%x rereg_1_hcall=%x "
+			 "iova_start=%p size=%llx acl=%x e_pd=%p pginfo=%p "
+			 "num_kpages=%llx lkey=%x rkey=%x rereg_1_hcall=%x "
 			 "rereg_3_hcall=%x", ret, shca, e_mr, iova_start, size,
 			 acl, e_pd, pginfo, pginfo->num_kpages, *lkey, *rkey,
 			 rereg_1_hcall, rereg_3_hcall);
@@ -1371,8 +1371,8 @@
 		 * FMRs are not shared and no MW bound to FMRs
 		 */
 		ehca_err(&shca->ib_device, "hipz_reregister_pmr failed "
-			 "(Rereg1), h_ret=%li e_fmr=%p hca_hndl=%lx "
-			 "mr_hndl=%lx lkey=%x lkey_out=%x",
+			 "(Rereg1), h_ret=%lli e_fmr=%p hca_hndl=%llx "
+			 "mr_hndl=%llx lkey=%x lkey_out=%x",
 			 h_ret, e_fmr, shca->ipz_hca_handle.handle,
 			 e_fmr->ipz_mr_handle.handle,
 			 e_fmr->ib.ib_fmr.lkey, hipzout.lkey);
@@ -1383,7 +1383,7 @@
 	h_ret = hipz_h_free_resource_mr(shca->ipz_hca_handle, e_fmr);
 	if (h_ret != H_SUCCESS) {
 		ehca_err(&shca->ib_device, "hipz_free_mr failed, "
-			 "h_ret=%li e_fmr=%p hca_hndl=%lx mr_hndl=%lx "
+			 "h_ret=%lli e_fmr=%p hca_hndl=%llx mr_hndl=%llx "
 			 "lkey=%x",
 			 h_ret, e_fmr, shca->ipz_hca_handle.handle,
 			 e_fmr->ipz_mr_handle.handle,
@@ -1447,9 +1447,9 @@
 				    (u64)iova_start, hipz_acl, e_pd->fw_pd,
 				    &hipzout);
 	if (h_ret != H_SUCCESS) {
-		ehca_err(&shca->ib_device, "hipz_reg_smr failed, h_ret=%li "
+		ehca_err(&shca->ib_device, "hipz_reg_smr failed, h_ret=%lli "
 			 "shca=%p e_origmr=%p e_newmr=%p iova_start=%p acl=%x "
-			 "e_pd=%p hca_hndl=%lx mr_hndl=%lx lkey=%x",
+			 "e_pd=%p hca_hndl=%llx mr_hndl=%llx lkey=%x",
 			 h_ret, shca, e_origmr, e_newmr, iova_start, acl, e_pd,
 			 shca->ipz_hca_handle.handle,
 			 e_origmr->ipz_mr_handle.handle,
@@ -1527,7 +1527,7 @@
 			  &e_mr->ib.ib_mr.rkey);
 	if (ret) {
 		ehca_err(&shca->ib_device, "reg of internal max MR failed, "
-			 "e_mr=%p iova_start=%p size_maxmr=%lx num_kpages=%x "
+			 "e_mr=%p iova_start=%p size_maxmr=%llx num_kpages=%x "
 			 "num_hwpages=%x", e_mr, iova_start, size_maxmr,
 			 num_kpages, num_hwpages);
 		goto ehca_reg_internal_maxmr_exit1;
@@ -1573,8 +1573,8 @@
 				    (u64)iova_start, hipz_acl, e_pd->fw_pd,
 				    &hipzout);
 	if (h_ret != H_SUCCESS) {
-		ehca_err(&shca->ib_device, "hipz_reg_smr failed, h_ret=%li "
-			 "e_origmr=%p hca_hndl=%lx mr_hndl=%lx lkey=%x",
+		ehca_err(&shca->ib_device, "hipz_reg_smr failed, h_ret=%lli "
+			 "e_origmr=%p hca_hndl=%llx mr_hndl=%llx lkey=%x",
 			 h_ret, e_origmr, shca->ipz_hca_handle.handle,
 			 e_origmr->ipz_mr_handle.handle,
 			 e_origmr->ib.ib_mr.lkey);
@@ -1651,28 +1651,28 @@
 	/* check first buffer */
 	if (((u64)iova_start & ~PAGE_MASK) != (pbuf->addr & ~PAGE_MASK)) {
 		ehca_gen_err("iova_start/addr mismatch, iova_start=%p "
-			     "pbuf->addr=%lx pbuf->size=%lx",
+			     "pbuf->addr=%llx pbuf->size=%llx",
 			     iova_start, pbuf->addr, pbuf->size);
 		return -EINVAL;
 	}
 	if (((pbuf->addr + pbuf->size) % PAGE_SIZE) &&
 	    (num_phys_buf > 1)) {
-		ehca_gen_err("addr/size mismatch in 1st buf, pbuf->addr=%lx "
-			     "pbuf->size=%lx", pbuf->addr, pbuf->size);
+		ehca_gen_err("addr/size mismatch in 1st buf, pbuf->addr=%llx "
+			     "pbuf->size=%llx", pbuf->addr, pbuf->size);
 		return -EINVAL;
 	}
 
 	for (i = 0; i < num_phys_buf; i++) {
 		if ((i > 0) && (pbuf->addr % PAGE_SIZE)) {
-			ehca_gen_err("bad address, i=%x pbuf->addr=%lx "
-				     "pbuf->size=%lx",
+			ehca_gen_err("bad address, i=%x pbuf->addr=%llx "
+				     "pbuf->size=%llx",
 				     i, pbuf->addr, pbuf->size);
 			return -EINVAL;
 		}
 		if (((i > 0) &&	/* not 1st */
 		     (i < (num_phys_buf - 1)) &&	/* not last */
 		     (pbuf->size % PAGE_SIZE)) || (pbuf->size == 0)) {
-			ehca_gen_err("bad size, i=%x pbuf->size=%lx",
+			ehca_gen_err("bad size, i=%x pbuf->size=%llx",
 				     i, pbuf->size);
 			return -EINVAL;
 		}
@@ -1705,7 +1705,7 @@
 	page = page_list;
 	for (i = 0; i < list_len; i++) {
 		if (*page % e_fmr->fmr_page_size) {
-			ehca_gen_err("bad page, i=%x *page=%lx page=%p fmr=%p "
+			ehca_gen_err("bad page, i=%x *page=%llx page=%p fmr=%p "
 				     "fmr_page_size=%x", i, *page, page, e_fmr,
 				     e_fmr->fmr_page_size);
 			return -EINVAL;
@@ -1743,9 +1743,9 @@
 					     (pginfo->next_hwpage *
 					      pginfo->hwpage_size));
 			if ( !(*kpage) ) {
-				ehca_gen_err("pgaddr=%lx "
-					     "chunk->page_list[i]=%lx "
-					     "i=%x next_hwpage=%lx",
+				ehca_gen_err("pgaddr=%llx "
+					     "chunk->page_list[i]=%llx "
+					     "i=%x next_hwpage=%llx",
 					     pgaddr, (u64)sg_dma_address(
 						     &chunk->page_list[i]),
 					     i, pginfo->next_hwpage);
@@ -1795,11 +1795,11 @@
 	for (t = start_idx; t <= end_idx; t++) {
 		u64 pgaddr = page_to_pfn(sg_page(&page_list[t])) << PAGE_SHIFT;
 		if (ehca_debug_level >= 3)
-			ehca_gen_dbg("chunk_page=%lx value=%016lx", pgaddr,
+			ehca_gen_dbg("chunk_page=%llx value=%016llx", pgaddr,
 				     *(u64 *)abs_to_virt(phys_to_abs(pgaddr)));
 		if (pgaddr - PAGE_SIZE != *prev_pgaddr) {
-			ehca_gen_err("uncontiguous page found pgaddr=%lx "
-				     "prev_pgaddr=%lx page_list_i=%x",
+			ehca_gen_err("uncontiguous page found pgaddr=%llx "
+				     "prev_pgaddr=%llx page_list_i=%x",
 				     pgaddr, *prev_pgaddr, t);
 			return -EINVAL;
 		}
@@ -1833,7 +1833,7 @@
 					   << PAGE_SHIFT );
 				*kpage = phys_to_abs(pgaddr);
 				if ( !(*kpage) ) {
-					ehca_gen_err("pgaddr=%lx i=%x",
+					ehca_gen_err("pgaddr=%llx i=%x",
 						     pgaddr, i);
 					ret = -EFAULT;
 					return ret;
@@ -1846,8 +1846,8 @@
 					if (pginfo->hwpage_cnt) {
 						ehca_gen_err(
 							"invalid alignment "
-							"pgaddr=%lx i=%x "
-							"mr_pgsize=%lx",
+							"pgaddr=%llx i=%x "
+							"mr_pgsize=%llx",
 							pgaddr, i,
 							pginfo->hwpage_size);
 						ret = -EFAULT;
@@ -1866,8 +1866,8 @@
 				if (ehca_debug_level >= 3) {
 					u64 val = *(u64 *)abs_to_virt(
 						phys_to_abs(pgaddr));
-					ehca_gen_dbg("kpage=%lx chunk_page=%lx "
-						     "value=%016lx",
+					ehca_gen_dbg("kpage=%llx chunk_page=%llx "
+						     "value=%016llx",
 						     *kpage, pgaddr, val);
 				}
 				prev_pgaddr = pgaddr;
@@ -1944,9 +1944,9 @@
 			if ((pginfo->kpage_cnt >= pginfo->num_kpages) ||
 			    (pginfo->hwpage_cnt >= pginfo->num_hwpages)) {
 				ehca_gen_err("kpage_cnt >= num_kpages, "
-					     "kpage_cnt=%lx num_kpages=%lx "
-					     "hwpage_cnt=%lx "
-					     "num_hwpages=%lx i=%x",
+					     "kpage_cnt=%llx num_kpages=%llx "
+					     "hwpage_cnt=%llx "
+					     "num_hwpages=%llx i=%x",
 					     pginfo->kpage_cnt,
 					     pginfo->num_kpages,
 					     pginfo->hwpage_cnt,
@@ -1957,8 +1957,8 @@
 				(pbuf->addr & ~(pginfo->hwpage_size - 1)) +
 				(pginfo->next_hwpage * pginfo->hwpage_size));
 			if ( !(*kpage) && pbuf->addr ) {
-				ehca_gen_err("pbuf->addr=%lx pbuf->size=%lx "
-					     "next_hwpage=%lx", pbuf->addr,
+				ehca_gen_err("pbuf->addr=%llx pbuf->size=%llx "
+					     "next_hwpage=%llx", pbuf->addr,
 					     pbuf->size, pginfo->next_hwpage);
 				return -EFAULT;
 			}
@@ -1996,8 +1996,8 @@
 		*kpage = phys_to_abs((*fmrlist & ~(pginfo->hwpage_size - 1)) +
 				     pginfo->next_hwpage * pginfo->hwpage_size);
 		if ( !(*kpage) ) {
-			ehca_gen_err("*fmrlist=%lx fmrlist=%p "
-				     "next_listelem=%lx next_hwpage=%lx",
+			ehca_gen_err("*fmrlist=%llx fmrlist=%p "
+				     "next_listelem=%llx next_hwpage=%llx",
 				     *fmrlist, fmrlist,
 				     pginfo->u.fmr.next_listelem,
 				     pginfo->next_hwpage);
@@ -2025,7 +2025,7 @@
 						    ~(pginfo->hwpage_size - 1));
 				if (prev + pginfo->u.fmr.fmr_pgsize != p) {
 					ehca_gen_err("uncontiguous fmr pages "
-						     "found prev=%lx p=%lx "
+						     "found prev=%llx p=%llx "
 						     "idx=%x", prev, p, i + j);
 					return -EINVAL;
 				}
diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c
index f161cf1..00c1081 100644
--- a/drivers/infiniband/hw/ehca/ehca_qp.c
+++ b/drivers/infiniband/hw/ehca/ehca_qp.c
@@ -331,7 +331,7 @@
 		if (cnt == (nr_q_pages - 1)) {	/* last page! */
 			if (h_ret != expected_hret) {
 				ehca_err(ib_dev, "hipz_qp_register_rpage() "
-					 "h_ret=%li", h_ret);
+					 "h_ret=%lli", h_ret);
 				ret = ehca2ib_return_code(h_ret);
 				goto init_qp_queue1;
 			}
@@ -345,7 +345,7 @@
 		} else {
 			if (h_ret != H_PAGE_REGISTERED) {
 				ehca_err(ib_dev, "hipz_qp_register_rpage() "
-					 "h_ret=%li", h_ret);
+					 "h_ret=%lli", h_ret);
 				ret = ehca2ib_return_code(h_ret);
 				goto init_qp_queue1;
 			}
@@ -709,7 +709,7 @@
 
 	h_ret = hipz_h_alloc_resource_qp(shca->ipz_hca_handle, &parms);
 	if (h_ret != H_SUCCESS) {
-		ehca_err(pd->device, "h_alloc_resource_qp() failed h_ret=%li",
+		ehca_err(pd->device, "h_alloc_resource_qp() failed h_ret=%lli",
 			 h_ret);
 		ret = ehca2ib_return_code(h_ret);
 		goto create_qp_exit1;
@@ -1010,7 +1010,7 @@
 				mqpcb, my_qp->galpas.kernel);
 	if (hret != H_SUCCESS) {
 		ehca_err(pd->device, "Could not modify SRQ to INIT "
-			 "ehca_qp=%p qp_num=%x h_ret=%li",
+			 "ehca_qp=%p qp_num=%x h_ret=%lli",
 			 my_qp, my_qp->real_qp_num, hret);
 		goto create_srq2;
 	}
@@ -1024,7 +1024,7 @@
 				mqpcb, my_qp->galpas.kernel);
 	if (hret != H_SUCCESS) {
 		ehca_err(pd->device, "Could not enable SRQ "
-			 "ehca_qp=%p qp_num=%x h_ret=%li",
+			 "ehca_qp=%p qp_num=%x h_ret=%lli",
 			 my_qp, my_qp->real_qp_num, hret);
 		goto create_srq2;
 	}
@@ -1038,7 +1038,7 @@
 				mqpcb, my_qp->galpas.kernel);
 	if (hret != H_SUCCESS) {
 		ehca_err(pd->device, "Could not modify SRQ to RTR "
-			 "ehca_qp=%p qp_num=%x h_ret=%li",
+			 "ehca_qp=%p qp_num=%x h_ret=%lli",
 			 my_qp, my_qp->real_qp_num, hret);
 		goto create_srq2;
 	}
@@ -1078,7 +1078,7 @@
 					   &bad_send_wqe_p, NULL, 2);
 	if (h_ret != H_SUCCESS) {
 		ehca_err(&shca->ib_device, "hipz_h_disable_and_get_wqe() failed"
-			 " ehca_qp=%p qp_num=%x h_ret=%li",
+			 " ehca_qp=%p qp_num=%x h_ret=%lli",
 			 my_qp, qp_num, h_ret);
 		return ehca2ib_return_code(h_ret);
 	}
@@ -1134,7 +1134,7 @@
 
 	if (ipz_queue_abs_to_offset(ipz_queue, wqe_p, &q_ofs)) {
 		ehca_gen_err("Invalid offset for calculating left cqes "
-				"wqe_p=%#lx wqe_v=%p\n", wqe_p, wqe_v);
+				"wqe_p=%#llx wqe_v=%p\n", wqe_p, wqe_v);
 		return -EFAULT;
 	}
 
@@ -1168,7 +1168,7 @@
 				&send_wqe_p, &recv_wqe_p, 4);
 		if (h_ret != H_SUCCESS) {
 			ehca_err(&shca->ib_device, "disable_and_get_wqe() "
-				 "failed ehca_qp=%p qp_num=%x h_ret=%li",
+				 "failed ehca_qp=%p qp_num=%x h_ret=%lli",
 				 my_qp, qp_num, h_ret);
 			return ehca2ib_return_code(h_ret);
 		}
@@ -1261,7 +1261,7 @@
 				mqpcb, my_qp->galpas.kernel);
 	if (h_ret != H_SUCCESS) {
 		ehca_err(ibqp->device, "hipz_h_query_qp() failed "
-			 "ehca_qp=%p qp_num=%x h_ret=%li",
+			 "ehca_qp=%p qp_num=%x h_ret=%lli",
 			 my_qp, ibqp->qp_num, h_ret);
 		ret = ehca2ib_return_code(h_ret);
 		goto modify_qp_exit1;
@@ -1690,7 +1690,7 @@
 
 	if (h_ret != H_SUCCESS) {
 		ret = ehca2ib_return_code(h_ret);
-		ehca_err(ibqp->device, "hipz_h_modify_qp() failed h_ret=%li "
+		ehca_err(ibqp->device, "hipz_h_modify_qp() failed h_ret=%lli "
 			 "ehca_qp=%p qp_num=%x", h_ret, my_qp, ibqp->qp_num);
 		goto modify_qp_exit2;
 	}
@@ -1723,7 +1723,7 @@
 			ret = ehca2ib_return_code(h_ret);
 			ehca_err(ibqp->device, "ENABLE in context of "
 				 "RESET_2_INIT failed! Maybe you didn't get "
-				 "a LID h_ret=%li ehca_qp=%p qp_num=%x",
+				 "a LID h_ret=%lli ehca_qp=%p qp_num=%x",
 				 h_ret, my_qp, ibqp->qp_num);
 			goto modify_qp_exit2;
 		}
@@ -1909,7 +1909,7 @@
 	if (h_ret != H_SUCCESS) {
 		ret = ehca2ib_return_code(h_ret);
 		ehca_err(qp->device, "hipz_h_query_qp() failed "
-			 "ehca_qp=%p qp_num=%x h_ret=%li",
+			 "ehca_qp=%p qp_num=%x h_ret=%lli",
 			 my_qp, qp->qp_num, h_ret);
 		goto query_qp_exit1;
 	}
@@ -2074,7 +2074,7 @@
 
 	if (h_ret != H_SUCCESS) {
 		ret = ehca2ib_return_code(h_ret);
-		ehca_err(ibsrq->device, "hipz_h_modify_qp() failed h_ret=%li "
+		ehca_err(ibsrq->device, "hipz_h_modify_qp() failed h_ret=%lli "
 			 "ehca_qp=%p qp_num=%x",
 			 h_ret, my_qp, my_qp->real_qp_num);
 	}
@@ -2108,7 +2108,7 @@
 	if (h_ret != H_SUCCESS) {
 		ret = ehca2ib_return_code(h_ret);
 		ehca_err(srq->device, "hipz_h_query_qp() failed "
-			 "ehca_qp=%p qp_num=%x h_ret=%li",
+			 "ehca_qp=%p qp_num=%x h_ret=%lli",
 			 my_qp, my_qp->real_qp_num, h_ret);
 		goto query_srq_exit1;
 	}
@@ -2179,7 +2179,7 @@
 
 	h_ret = hipz_h_destroy_qp(shca->ipz_hca_handle, my_qp);
 	if (h_ret != H_SUCCESS) {
-		ehca_err(dev, "hipz_h_destroy_qp() failed h_ret=%li "
+		ehca_err(dev, "hipz_h_destroy_qp() failed h_ret=%lli "
 			 "ehca_qp=%p qp_num=%x", h_ret, my_qp, qp_num);
 		return ehca2ib_return_code(h_ret);
 	}
diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c
index c711268..5a3d96f 100644
--- a/drivers/infiniband/hw/ehca/ehca_reqs.c
+++ b/drivers/infiniband/hw/ehca/ehca_reqs.c
@@ -822,7 +822,7 @@
 		offset = qmap->next_wqe_idx * ipz_queue->qe_size;
 		wqe = (struct ehca_wqe *)ipz_qeit_calc(ipz_queue, offset);
 		if (!wqe) {
-			ehca_err(cq->device, "Invalid wqe offset=%#lx on "
+			ehca_err(cq->device, "Invalid wqe offset=%#llx on "
 				 "qp_num=%#x", offset, my_qp->real_qp_num);
 			return nr;
 		}
diff --git a/drivers/infiniband/hw/ehca/ehca_sqp.c b/drivers/infiniband/hw/ehca/ehca_sqp.c
index 706d97a..44447aa 100644
--- a/drivers/infiniband/hw/ehca/ehca_sqp.c
+++ b/drivers/infiniband/hw/ehca/ehca_sqp.c
@@ -85,7 +85,7 @@
 
 		if (ret != H_SUCCESS) {
 			ehca_err(&shca->ib_device,
-				 "Can't define AQP1 for port %x. h_ret=%li",
+				 "Can't define AQP1 for port %x. h_ret=%lli",
 				 port, ret);
 			return ret;
 		}
diff --git a/drivers/infiniband/hw/ehca/ehca_tools.h b/drivers/infiniband/hw/ehca/ehca_tools.h
index 21f7d06..f09914c 100644
--- a/drivers/infiniband/hw/ehca/ehca_tools.h
+++ b/drivers/infiniband/hw/ehca/ehca_tools.h
@@ -116,7 +116,7 @@
 		unsigned char *deb = (unsigned char *)(adr); \
 		for (x = 0; x < l; x += 16) { \
 			printk(KERN_INFO "EHCA_DMP:%s " format \
-			       " adr=%p ofs=%04x %016lx %016lx\n", \
+			       " adr=%p ofs=%04x %016llx %016llx\n", \
 			       __func__, ##args, deb, x, \
 			       *((u64 *)&deb[0]), *((u64 *)&deb[8])); \
 			deb += 16; \
diff --git a/drivers/infiniband/hw/ehca/ehca_uverbs.c b/drivers/infiniband/hw/ehca/ehca_uverbs.c
index e43ed8f..3cb688d 100644
--- a/drivers/infiniband/hw/ehca/ehca_uverbs.c
+++ b/drivers/infiniband/hw/ehca/ehca_uverbs.c
@@ -114,7 +114,7 @@
 
 	physical = galpas->user.fw_handle;
 	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-	ehca_gen_dbg("vsize=%lx physical=%lx", vsize, physical);
+	ehca_gen_dbg("vsize=%llx physical=%llx", vsize, physical);
 	/* VM_IO | VM_RESERVED are set by remap_pfn_range() */
 	ret = remap_4k_pfn(vma, vma->vm_start, physical >> EHCA_PAGESHIFT,
 			   vma->vm_page_prot);
diff --git a/drivers/infiniband/hw/ehca/hcp_if.c b/drivers/infiniband/hw/ehca/hcp_if.c
index 415d3a4..d0ab0c0 100644
--- a/drivers/infiniband/hw/ehca/hcp_if.c
+++ b/drivers/infiniband/hw/ehca/hcp_if.c
@@ -226,7 +226,7 @@
 			     u32 *eq_ist)
 {
 	u64 ret;
-	u64 outs[PLPAR_HCALL9_BUFSIZE];
+	unsigned long outs[PLPAR_HCALL9_BUFSIZE];
 	u64 allocate_controls;
 
 	/* resource type */
@@ -249,7 +249,7 @@
 	*eq_ist = (u32)outs[5];
 
 	if (ret == H_NOT_ENOUGH_RESOURCES)
-		ehca_gen_err("Not enough resource - ret=%li ", ret);
+		ehca_gen_err("Not enough resource - ret=%lli ", ret);
 
 	return ret;
 }
@@ -270,7 +270,7 @@
 			     struct ehca_alloc_cq_parms *param)
 {
 	u64 ret;
-	u64 outs[PLPAR_HCALL9_BUFSIZE];
+	unsigned long outs[PLPAR_HCALL9_BUFSIZE];
 
 	ret = ehca_plpar_hcall9(H_ALLOC_RESOURCE, outs,
 				adapter_handle.handle,   /* r4  */
@@ -287,7 +287,7 @@
 		hcp_galpas_ctor(&cq->galpas, outs[5], outs[6]);
 
 	if (ret == H_NOT_ENOUGH_RESOURCES)
-		ehca_gen_err("Not enough resources. ret=%li", ret);
+		ehca_gen_err("Not enough resources. ret=%lli", ret);
 
 	return ret;
 }
@@ -297,7 +297,7 @@
 {
 	u64 ret;
 	u64 allocate_controls, max_r10_reg, r11, r12;
-	u64 outs[PLPAR_HCALL9_BUFSIZE];
+	unsigned long outs[PLPAR_HCALL9_BUFSIZE];
 
 	allocate_controls =
 		EHCA_BMASK_SET(H_ALL_RES_QP_ENHANCED_OPS, parms->ext_type)
@@ -362,7 +362,7 @@
 		hcp_galpas_ctor(&parms->galpas, outs[6], outs[6]);
 
 	if (ret == H_NOT_ENOUGH_RESOURCES)
-		ehca_gen_err("Not enough resources. ret=%li", ret);
+		ehca_gen_err("Not enough resources. ret=%lli", ret);
 
 	return ret;
 }
@@ -454,7 +454,7 @@
 			     const u64 count)
 {
 	if (count != 1) {
-		ehca_gen_err("Ppage counter=%lx", count);
+		ehca_gen_err("Ppage counter=%llx", count);
 		return H_PARAMETER;
 	}
 	return hipz_h_register_rpage(adapter_handle,
@@ -489,7 +489,7 @@
 			     const struct h_galpa gal)
 {
 	if (count != 1) {
-		ehca_gen_err("Page counter=%lx", count);
+		ehca_gen_err("Page counter=%llx", count);
 		return H_PARAMETER;
 	}
 
@@ -508,7 +508,7 @@
 			     const struct h_galpa galpa)
 {
 	if (count > 1) {
-		ehca_gen_err("Page counter=%lx", count);
+		ehca_gen_err("Page counter=%llx", count);
 		return H_PARAMETER;
 	}
 
@@ -525,7 +525,7 @@
 			       int dis_and_get_function_code)
 {
 	u64 ret;
-	u64 outs[PLPAR_HCALL9_BUFSIZE];
+	unsigned long outs[PLPAR_HCALL9_BUFSIZE];
 
 	ret = ehca_plpar_hcall9(H_DISABLE_AND_GETC, outs,
 				adapter_handle.handle,     /* r4 */
@@ -548,7 +548,7 @@
 		     struct h_galpa gal)
 {
 	u64 ret;
-	u64 outs[PLPAR_HCALL9_BUFSIZE];
+	unsigned long outs[PLPAR_HCALL9_BUFSIZE];
 	ret = ehca_plpar_hcall9(H_MODIFY_QP, outs,
 				adapter_handle.handle, /* r4 */
 				qp_handle.handle,      /* r5 */
@@ -557,7 +557,7 @@
 				0, 0, 0, 0, 0);
 
 	if (ret == H_NOT_ENOUGH_RESOURCES)
-		ehca_gen_err("Insufficient resources ret=%li", ret);
+		ehca_gen_err("Insufficient resources ret=%lli", ret);
 
 	return ret;
 }
@@ -579,7 +579,7 @@
 		      struct ehca_qp *qp)
 {
 	u64 ret;
-	u64 outs[PLPAR_HCALL9_BUFSIZE];
+	unsigned long outs[PLPAR_HCALL9_BUFSIZE];
 
 	ret = hcp_galpas_dtor(&qp->galpas);
 	if (ret) {
@@ -593,7 +593,7 @@
 				qp->ipz_qp_handle.handle,  /* r6 */
 				0, 0, 0, 0, 0, 0);
 	if (ret == H_HARDWARE)
-		ehca_gen_err("HCA not operational. ret=%li", ret);
+		ehca_gen_err("HCA not operational. ret=%lli", ret);
 
 	ret = ehca_plpar_hcall_norets(H_FREE_RESOURCE,
 				      adapter_handle.handle,     /* r4 */
@@ -601,7 +601,7 @@
 				      0, 0, 0, 0, 0);
 
 	if (ret == H_RESOURCE)
-		ehca_gen_err("Resource still in use. ret=%li", ret);
+		ehca_gen_err("Resource still in use. ret=%lli", ret);
 
 	return ret;
 }
@@ -625,7 +625,7 @@
 		       u32 * bma_qp_nr)
 {
 	u64 ret;
-	u64 outs[PLPAR_HCALL9_BUFSIZE];
+	unsigned long outs[PLPAR_HCALL9_BUFSIZE];
 
 	ret = ehca_plpar_hcall9(H_DEFINE_AQP1, outs,
 				adapter_handle.handle, /* r4 */
@@ -636,7 +636,7 @@
 	*bma_qp_nr = (u32)outs[1];
 
 	if (ret == H_ALIAS_EXIST)
-		ehca_gen_err("AQP1 already exists. ret=%li", ret);
+		ehca_gen_err("AQP1 already exists. ret=%lli", ret);
 
 	return ret;
 }
@@ -658,7 +658,7 @@
 				      0, 0);
 
 	if (ret == H_NOT_ENOUGH_RESOURCES)
-		ehca_gen_err("Not enough resources. ret=%li", ret);
+		ehca_gen_err("Not enough resources. ret=%lli", ret);
 
 	return ret;
 }
@@ -697,7 +697,7 @@
 				      0, 0, 0, 0);
 
 	if (ret == H_RESOURCE)
-		ehca_gen_err("H_FREE_RESOURCE failed ret=%li ", ret);
+		ehca_gen_err("H_FREE_RESOURCE failed ret=%lli ", ret);
 
 	return ret;
 }
@@ -719,7 +719,7 @@
 				      0, 0, 0, 0, 0);
 
 	if (ret == H_RESOURCE)
-		ehca_gen_err("Resource in use. ret=%li ", ret);
+		ehca_gen_err("Resource in use. ret=%lli ", ret);
 
 	return ret;
 }
@@ -733,7 +733,7 @@
 			     struct ehca_mr_hipzout_parms *outparms)
 {
 	u64 ret;
-	u64 outs[PLPAR_HCALL9_BUFSIZE];
+	unsigned long outs[PLPAR_HCALL9_BUFSIZE];
 
 	ret = ehca_plpar_hcall9(H_ALLOC_RESOURCE, outs,
 				adapter_handle.handle,            /* r4 */
@@ -774,9 +774,9 @@
 
 	if ((count > 1) && (logical_address_of_page & (EHCA_PAGESIZE-1))) {
 		ehca_gen_err("logical_address_of_page not on a 4k boundary "
-			     "adapter_handle=%lx mr=%p mr_handle=%lx "
+			     "adapter_handle=%llx mr=%p mr_handle=%llx "
 			     "pagesize=%x queue_type=%x "
-			     "logical_address_of_page=%lx count=%lx",
+			     "logical_address_of_page=%llx count=%llx",
 			     adapter_handle.handle, mr,
 			     mr->ipz_mr_handle.handle, pagesize, queue_type,
 			     logical_address_of_page, count);
@@ -794,7 +794,7 @@
 		    struct ehca_mr_hipzout_parms *outparms)
 {
 	u64 ret;
-	u64 outs[PLPAR_HCALL9_BUFSIZE];
+	unsigned long outs[PLPAR_HCALL9_BUFSIZE];
 
 	ret = ehca_plpar_hcall9(H_QUERY_MR, outs,
 				adapter_handle.handle,     /* r4 */
@@ -828,7 +828,7 @@
 			  struct ehca_mr_hipzout_parms *outparms)
 {
 	u64 ret;
-	u64 outs[PLPAR_HCALL9_BUFSIZE];
+	unsigned long outs[PLPAR_HCALL9_BUFSIZE];
 
 	ret = ehca_plpar_hcall9(H_REREGISTER_PMR, outs,
 				adapter_handle.handle,    /* r4 */
@@ -855,7 +855,7 @@
 			struct ehca_mr_hipzout_parms *outparms)
 {
 	u64 ret;
-	u64 outs[PLPAR_HCALL9_BUFSIZE];
+	unsigned long outs[PLPAR_HCALL9_BUFSIZE];
 
 	ret = ehca_plpar_hcall9(H_REGISTER_SMR, outs,
 				adapter_handle.handle,            /* r4 */
@@ -877,7 +877,7 @@
 			     struct ehca_mw_hipzout_parms *outparms)
 {
 	u64 ret;
-	u64 outs[PLPAR_HCALL9_BUFSIZE];
+	unsigned long outs[PLPAR_HCALL9_BUFSIZE];
 
 	ret = ehca_plpar_hcall9(H_ALLOC_RESOURCE, outs,
 				adapter_handle.handle,      /* r4 */
@@ -895,7 +895,7 @@
 		    struct ehca_mw_hipzout_parms *outparms)
 {
 	u64 ret;
-	u64 outs[PLPAR_HCALL9_BUFSIZE];
+	unsigned long outs[PLPAR_HCALL9_BUFSIZE];
 
 	ret = ehca_plpar_hcall9(H_QUERY_MW, outs,
 				adapter_handle.handle,    /* r4 */
diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c
index dcefe1f..61588bd2 100644
--- a/drivers/infiniband/hw/mlx4/main.c
+++ b/drivers/infiniband/hw/mlx4/main.c
@@ -543,14 +543,21 @@
 {
 	static int mlx4_ib_version_printed;
 	struct mlx4_ib_dev *ibdev;
+	int num_ports = 0;
 	int i;
 
-
 	if (!mlx4_ib_version_printed) {
 		printk(KERN_INFO "%s", mlx4_ib_version);
 		++mlx4_ib_version_printed;
 	}
 
+	mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_IB)
+		num_ports++;
+
+	/* No point in registering a device with no ports... */
+	if (num_ports == 0)
+		return NULL;
+
 	ibdev = (struct mlx4_ib_dev *) ib_alloc_device(sizeof *ibdev);
 	if (!ibdev) {
 		dev_err(&dev->pdev->dev, "Device struct alloc failed\n");
@@ -574,9 +581,7 @@
 	ibdev->ib_dev.owner		= THIS_MODULE;
 	ibdev->ib_dev.node_type		= RDMA_NODE_IB_CA;
 	ibdev->ib_dev.local_dma_lkey	= dev->caps.reserved_lkey;
-	ibdev->num_ports = 0;
-	mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_IB)
-		ibdev->num_ports++;
+	ibdev->num_ports		= num_ports;
 	ibdev->ib_dev.phys_port_cnt     = ibdev->num_ports;
 	ibdev->ib_dev.num_comp_vectors	= dev->caps.num_comp_vectors;
 	ibdev->ib_dev.dma_device	= &dev->pdev->dev;
diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index 39167a7..a91cb4c 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -1462,7 +1462,8 @@
 }
 
 static int build_lso_seg(struct mlx4_wqe_lso_seg *wqe, struct ib_send_wr *wr,
-			 struct mlx4_ib_qp *qp, unsigned *lso_seg_len)
+			 struct mlx4_ib_qp *qp, unsigned *lso_seg_len,
+			 __be32 *lso_hdr_sz)
 {
 	unsigned halign = ALIGN(sizeof *wqe + wr->wr.ud.hlen, 16);
 
@@ -1479,12 +1480,8 @@
 
 	memcpy(wqe->header, wr->wr.ud.header, wr->wr.ud.hlen);
 
-	/* make sure LSO header is written before overwriting stamping */
-	wmb();
-
-	wqe->mss_hdr_size = cpu_to_be32((wr->wr.ud.mss - wr->wr.ud.hlen) << 16 |
-					wr->wr.ud.hlen);
-
+	*lso_hdr_sz  = cpu_to_be32((wr->wr.ud.mss - wr->wr.ud.hlen) << 16 |
+				   wr->wr.ud.hlen);
 	*lso_seg_len = halign;
 	return 0;
 }
@@ -1518,6 +1515,9 @@
 	int uninitialized_var(stamp);
 	int uninitialized_var(size);
 	unsigned uninitialized_var(seglen);
+	__be32 dummy;
+	__be32 *lso_wqe;
+	__be32 uninitialized_var(lso_hdr_sz);
 	int i;
 
 	spin_lock_irqsave(&qp->sq.lock, flags);
@@ -1525,6 +1525,8 @@
 	ind = qp->sq_next_wqe;
 
 	for (nreq = 0; wr; ++nreq, wr = wr->next) {
+		lso_wqe = &dummy;
+
 		if (mlx4_wq_overflow(&qp->sq, nreq, qp->ibqp.send_cq)) {
 			err = -ENOMEM;
 			*bad_wr = wr;
@@ -1606,11 +1608,12 @@
 			size += sizeof (struct mlx4_wqe_datagram_seg) / 16;
 
 			if (wr->opcode == IB_WR_LSO) {
-				err = build_lso_seg(wqe, wr, qp, &seglen);
+				err = build_lso_seg(wqe, wr, qp, &seglen, &lso_hdr_sz);
 				if (unlikely(err)) {
 					*bad_wr = wr;
 					goto out;
 				}
+				lso_wqe = (__be32 *) wqe;
 				wqe  += seglen;
 				size += seglen / 16;
 			}
@@ -1652,6 +1655,14 @@
 		for (i = wr->num_sge - 1; i >= 0; --i, --dseg)
 			set_data_seg(dseg, wr->sg_list + i);
 
+		/*
+		 * Possibly overwrite stamping in cacheline with LSO
+		 * segment only after making sure all data segments
+		 * are written.
+		 */
+		wmb();
+		*lso_wqe = lso_hdr_sz;
+
 		ctrl->fence_size = (wr->send_flags & IB_SEND_FENCE ?
 				    MLX4_WQE_CTRL_FENCE : 0) | size;
 
@@ -1686,7 +1697,6 @@
 			stamp_send_wqe(qp, stamp, size * 16);
 			ind = pad_wraparound(qp, ind);
 		}
-
 	}
 
 out:
diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c
index 6ba57e9..a01b448 100644
--- a/drivers/infiniband/hw/nes/nes_cm.c
+++ b/drivers/infiniband/hw/nes/nes_cm.c
@@ -778,12 +778,13 @@
 	unsigned long flags;
 	struct list_head *hte;
 	struct nes_cm_node *cm_node;
+	__be32 tmp_addr = cpu_to_be32(loc_addr);
 
 	/* get a handle on the hte */
 	hte = &cm_core->connected_nodes;
 
 	nes_debug(NES_DBG_CM, "Searching for an owner node: %pI4:%x from core %p->%p\n",
-		  &loc_addr, loc_port, cm_core, hte);
+		  &tmp_addr, loc_port, cm_core, hte);
 
 	/* walk list and find cm_node associated with this session ID */
 	spin_lock_irqsave(&cm_core->ht_lock, flags);
@@ -816,6 +817,7 @@
 {
 	unsigned long flags;
 	struct nes_cm_listener *listen_node;
+	__be32 tmp_addr = cpu_to_be32(dst_addr);
 
 	/* walk list and find cm_node associated with this session ID */
 	spin_lock_irqsave(&cm_core->listen_list_lock, flags);
@@ -833,7 +835,7 @@
 	spin_unlock_irqrestore(&cm_core->listen_list_lock, flags);
 
 	nes_debug(NES_DBG_CM, "Unable to find listener for %pI4:%x\n",
-		  &dst_addr, dst_port);
+		  &tmp_addr, dst_port);
 
 	/* no listener */
 	return NULL;
@@ -2059,6 +2061,7 @@
 	struct tcphdr *tcph;
 	struct nes_cm_info nfo;
 	int skb_handled = 1;
+	__be32 tmp_daddr, tmp_saddr;
 
 	if (!skb)
 		return 0;
@@ -2074,8 +2077,11 @@
 	nfo.rem_addr = ntohl(iph->saddr);
 	nfo.rem_port = ntohs(tcph->source);
 
+	tmp_daddr = cpu_to_be32(iph->daddr);
+	tmp_saddr = cpu_to_be32(iph->saddr);
+
 	nes_debug(NES_DBG_CM, "Received packet: dest=%pI4:0x%04X src=%pI4:0x%04X\n",
-		  &iph->daddr, tcph->dest, &iph->saddr, tcph->source);
+		  &tmp_daddr, tcph->dest, &tmp_saddr, tcph->source);
 
 	do {
 		cm_node = find_node(cm_core,
diff --git a/drivers/infiniband/hw/nes/nes_utils.c b/drivers/infiniband/hw/nes/nes_utils.c
index aa9b734..6f3bc1b 100644
--- a/drivers/infiniband/hw/nes/nes_utils.c
+++ b/drivers/infiniband/hw/nes/nes_utils.c
@@ -655,6 +655,7 @@
 	struct nes_adapter *nesadapter = nesdev->nesadapter;
 	int arp_index;
 	int err = 0;
+	__be32 tmp_addr;
 
 	for (arp_index = 0; (u32) arp_index < nesadapter->arp_table_size; arp_index++) {
 		if (nesadapter->arp_table[arp_index].ip_addr == ip_addr)
@@ -682,8 +683,9 @@
 
 	/* DELETE or RESOLVE */
 	if (arp_index == nesadapter->arp_table_size) {
+		tmp_addr = cpu_to_be32(ip_addr);
 		nes_debug(NES_DBG_NETDEV, "MAC for %pI4 not in ARP table - cannot %s\n",
-			  &ip_addr, action == NES_ARP_RESOLVE ? "resolve" : "delete");
+			  &tmp_addr, action == NES_ARP_RESOLVE ? "resolve" : "delete");
 		return -1;
 	}
 
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index 19e06bc..0bd2a4f 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -106,23 +106,17 @@
 
 	ipoib_dbg(priv, "bringing up interface\n");
 
-	set_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags);
+	if (!test_and_set_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags))
+		napi_enable(&priv->napi);
 
 	if (ipoib_pkey_dev_delay_open(dev))
 		return 0;
 
-	napi_enable(&priv->napi);
+	if (ipoib_ib_dev_open(dev))
+		goto err_disable;
 
-	if (ipoib_ib_dev_open(dev)) {
-		napi_disable(&priv->napi);
-		return -EINVAL;
-	}
-
-	if (ipoib_ib_dev_up(dev)) {
-		ipoib_ib_dev_stop(dev, 1);
-		napi_disable(&priv->napi);
-		return -EINVAL;
-	}
+	if (ipoib_ib_dev_up(dev))
+		goto err_stop;
 
 	if (!test_bit(IPOIB_FLAG_SUBINTERFACE, &priv->flags)) {
 		struct ipoib_dev_priv *cpriv;
@@ -144,6 +138,15 @@
 	netif_start_queue(dev);
 
 	return 0;
+
+err_stop:
+	ipoib_ib_dev_stop(dev, 1);
+
+err_disable:
+	napi_disable(&priv->napi);
+	clear_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags);
+
+	return -EINVAL;
 }
 
 static int ipoib_stop(struct net_device *dev)
@@ -711,26 +714,26 @@
 
 		neigh = *to_ipoib_neigh(skb->dst->neighbour);
 
-		if (neigh->ah)
-			if (unlikely((memcmp(&neigh->dgid.raw,
-					    skb->dst->neighbour->ha + 4,
-					    sizeof(union ib_gid))) ||
-					 (neigh->dev != dev))) {
-				spin_lock_irqsave(&priv->lock, flags);
-				/*
-				 * It's safe to call ipoib_put_ah() inside
-				 * priv->lock here, because we know that
-				 * path->ah will always hold one more reference,
-				 * so ipoib_put_ah() will never do more than
-				 * decrement the ref count.
-				 */
+		if (unlikely((memcmp(&neigh->dgid.raw,
+				     skb->dst->neighbour->ha + 4,
+				     sizeof(union ib_gid))) ||
+			     (neigh->dev != dev))) {
+			spin_lock_irqsave(&priv->lock, flags);
+			/*
+			 * It's safe to call ipoib_put_ah() inside
+			 * priv->lock here, because we know that
+			 * path->ah will always hold one more reference,
+			 * so ipoib_put_ah() will never do more than
+			 * decrement the ref count.
+			 */
+			if (neigh->ah)
 				ipoib_put_ah(neigh->ah);
-				list_del(&neigh->list);
-				ipoib_neigh_free(dev, neigh);
-				spin_unlock_irqrestore(&priv->lock, flags);
-				ipoib_path_lookup(skb, dev);
-				return NETDEV_TX_OK;
-			}
+			list_del(&neigh->list);
+			ipoib_neigh_free(dev, neigh);
+			spin_unlock_irqrestore(&priv->lock, flags);
+			ipoib_path_lookup(skb, dev);
+			return NETDEV_TX_OK;
+		}
 
 		if (ipoib_cm_get(neigh)) {
 			if (ipoib_cm_up(neigh)) {
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
index a2eb3b9..425e311 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
@@ -409,7 +409,7 @@
 	}
 
 	if (mcast->logcount++ < 20) {
-		if (status == -ETIMEDOUT) {
+		if (status == -ETIMEDOUT || status == -EAGAIN) {
 			ipoib_dbg_mcast(priv, "multicast join failed for %pI6, status %d\n",
 					mcast->mcmember.mgid.raw, status);
 		} else {
@@ -529,6 +529,9 @@
 	if (!priv->broadcast) {
 		struct ipoib_mcast *broadcast;
 
+		if (!test_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags))
+			return;
+
 		broadcast = ipoib_mcast_alloc(dev, 1);
 		if (!broadcast) {
 			ipoib_warn(priv, "failed to allocate broadcast group\n");
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c
index 2cf1a40..5a76a55 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c
@@ -61,6 +61,7 @@
 
 	ppriv = netdev_priv(pdev);
 
+	rtnl_lock();
 	mutex_lock(&ppriv->vlan_mutex);
 
 	/*
@@ -111,7 +112,7 @@
 		goto device_init_failed;
 	}
 
-	result = register_netdev(priv->dev);
+	result = register_netdevice(priv->dev);
 	if (result) {
 		ipoib_warn(priv, "failed to initialize; error %i", result);
 		goto register_failed;
@@ -134,12 +135,13 @@
 	list_add_tail(&priv->list, &ppriv->child_intfs);
 
 	mutex_unlock(&ppriv->vlan_mutex);
+	rtnl_unlock();
 
 	return 0;
 
 sysfs_failed:
 	ipoib_delete_debug_files(priv->dev);
-	unregister_netdev(priv->dev);
+	unregister_netdevice(priv->dev);
 
 register_failed:
 	ipoib_dev_cleanup(priv->dev);
@@ -149,6 +151,7 @@
 
 err:
 	mutex_unlock(&ppriv->vlan_mutex);
+	rtnl_unlock();
 	return result;
 }
 
@@ -162,10 +165,11 @@
 
 	ppriv = netdev_priv(pdev);
 
+	rtnl_lock();
 	mutex_lock(&ppriv->vlan_mutex);
 	list_for_each_entry_safe(priv, tpriv, &ppriv->child_intfs, list) {
 		if (priv->pkey == pkey) {
-			unregister_netdev(priv->dev);
+			unregister_netdevice(priv->dev);
 			ipoib_dev_cleanup(priv->dev);
 			list_del(&priv->list);
 			free_netdev(priv->dev);
@@ -175,6 +179,7 @@
 		}
 	}
 	mutex_unlock(&ppriv->vlan_mutex);
+	rtnl_unlock();
 
 	return ret;
 }
diff --git a/drivers/infiniband/ulp/iser/Kconfig b/drivers/infiniband/ulp/iser/Kconfig
index 77dedba..b411c51 100644
--- a/drivers/infiniband/ulp/iser/Kconfig
+++ b/drivers/infiniband/ulp/iser/Kconfig
@@ -1,6 +1,6 @@
 config INFINIBAND_ISER
 	tristate "iSCSI Extensions for RDMA (iSER)"
-	depends on SCSI && INET
+	depends on SCSI && INET && INFINIBAND_ADDR_TRANS
 	select SCSI_ISCSI_ATTRS
 	---help---
 	  Support for the iSCSI Extensions for RDMA (iSER) Protocol
diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c
index 7c5f970..cb8943d 100644
--- a/drivers/isdn/i4l/isdn_net.c
+++ b/drivers/isdn/i4l/isdn_net.c
@@ -292,7 +292,9 @@
 	lp->dialstate = 0;
 	dev->rx_netdev[isdn_dc2minor(lp->isdn_device, lp->isdn_channel)] = NULL;
 	dev->st_netdev[isdn_dc2minor(lp->isdn_device, lp->isdn_channel)] = NULL;
-	isdn_free_channel(lp->isdn_device, lp->isdn_channel, ISDN_USAGE_NET);
+	if (lp->isdn_device != -1 && lp->isdn_channel != -1)
+		isdn_free_channel(lp->isdn_device, lp->isdn_channel,
+				  ISDN_USAGE_NET);
 	lp->flags &= ~ISDN_NET_CONNECTED;
 	lp->isdn_device = -1;
 	lp->isdn_channel = -1;
@@ -2513,7 +2515,6 @@
 	.ndo_stop	      = isdn_net_close,
 	.ndo_do_ioctl	      = isdn_net_ioctl,
 
-	.ndo_validate_addr    = NULL,
 	.ndo_start_xmit	      = isdn_net_start_xmit,
 	.ndo_get_stats	      = isdn_net_get_stats,
 	.ndo_tx_timeout	      = isdn_net_tx_timeout,
@@ -2528,12 +2529,8 @@
 
 	ether_setup(dev);
 
-	dev->flags = IFF_NOARP | IFF_POINTOPOINT;
 	/* Setup the generic properties */
-	dev->mtu = 1500;
 	dev->flags = IFF_NOARP|IFF_POINTOPOINT;
-	dev->type = ARPHRD_ETHER;
-	dev->addr_len = ETH_ALEN;
 	dev->header_ops = NULL;
 	dev->netdev_ops = &isdn_netdev_ops;
 
diff --git a/drivers/isdn/i4l/isdn_ppp.c b/drivers/isdn/i4l/isdn_ppp.c
index a3551dd..aa30b5c 100644
--- a/drivers/isdn/i4l/isdn_ppp.c
+++ b/drivers/isdn/i4l/isdn_ppp.c
@@ -431,6 +431,7 @@
 	return 0;
 }
 
+#ifdef CONFIG_IPPP_FILTER
 static int get_filter(void __user *arg, struct sock_filter **p)
 {
 	struct sock_fprog uprog;
@@ -465,6 +466,7 @@
 	*p = code;
 	return uprog.len;
 }
+#endif /* CONFIG_IPPP_FILTER */
 
 /*
  * ippp device ioctl
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index a4a1ae2..7427136 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -119,13 +119,6 @@
 	  outputs. To be useful the particular board must have LEDs
 	  and they must be connected to the GPIO lines.
 
-config LEDS_HP_DISK
-	tristate "LED Support for disk protection LED on HP notebooks"
-	depends on LEDS_CLASS && ACPI
-	help
-	  This option enable support for disk protection LED, found on
-	  newer HP notebooks.
-
 config LEDS_CLEVO_MAIL
 	tristate "Mail LED on Clevo notebook (EXPERIMENTAL)"
 	depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI && EXPERIMENTAL
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index bc247cb..9d76f0f 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -23,7 +23,6 @@
 obj-$(CONFIG_LEDS_FSG)			+= leds-fsg.o
 obj-$(CONFIG_LEDS_PCA955X)		+= leds-pca955x.o
 obj-$(CONFIG_LEDS_DA903X)		+= leds-da903x.o
-obj-$(CONFIG_LEDS_HP_DISK)		+= leds-hp-disk.o
 obj-$(CONFIG_LEDS_WM8350)		+= leds-wm8350.o
 
 # LED Triggers
diff --git a/drivers/leds/leds-hp-disk.c b/drivers/leds/leds-hp-disk.c
deleted file mode 100644
index d786adc..0000000
--- a/drivers/leds/leds-hp-disk.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- *  leds-hp-disk.c - driver for HP "hard disk protection" LED
- *
- *  Copyright (C) 2008 Pavel Machek
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/dmi.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/kthread.h>
-#include <linux/leds.h>
-#include <acpi/acpi_drivers.h>
-
-#define DRIVER_NAME     "leds-hp-disk"
-#define ACPI_MDPS_CLASS "led"
-
-/* For automatic insertion of the module */
-static struct acpi_device_id hpled_device_ids[] = {
-	{"HPQ0004", 0}, /* HP Mobile Data Protection System PNP */
-	{"", 0},
-};
-MODULE_DEVICE_TABLE(acpi, hpled_device_ids);
-
-struct acpi_hpled {
-	struct acpi_device	*device;   /* The ACPI device */
-};
-
-static struct acpi_hpled adev;
-
-static acpi_status hpled_acpi_write(acpi_handle handle, int reg)
-{
-	unsigned long long ret; /* Not used when writing */
-	union acpi_object in_obj[1];
-	struct acpi_object_list args = { 1, in_obj };
-
-	in_obj[0].type          = ACPI_TYPE_INTEGER;
-	in_obj[0].integer.value = reg;
-
-	return acpi_evaluate_integer(handle, "ALED", &args, &ret);
-}
-
-static void hpled_set(struct led_classdev *led_cdev,
-			       enum led_brightness value)
-{
-	hpled_acpi_write(adev.device->handle, !!value);
-}
-
-static struct led_classdev hpled_led = {
-	.name			= "hp:red:hddprotection",
-	.default_trigger	= "heartbeat",
-	.brightness_set		= hpled_set,
-	.flags			= LED_CORE_SUSPENDRESUME,
-};
-
-static int hpled_add(struct acpi_device *device)
-{
-	int ret;
-
-	if (!device)
-		return -EINVAL;
-
-	adev.device = device;
-	strcpy(acpi_device_name(device), DRIVER_NAME);
-	strcpy(acpi_device_class(device), ACPI_MDPS_CLASS);
-	device->driver_data = &adev;
-
-	ret = led_classdev_register(NULL, &hpled_led);
-	return ret;
-}
-
-static int hpled_remove(struct acpi_device *device, int type)
-{
-	if (!device)
-		return -EINVAL;
-
-	led_classdev_unregister(&hpled_led);
-	return 0;
-}
-
-
-
-static struct acpi_driver leds_hp_driver = {
-	.name  = DRIVER_NAME,
-	.class = ACPI_MDPS_CLASS,
-	.ids   = hpled_device_ids,
-	.ops = {
-		.add     = hpled_add,
-		.remove  = hpled_remove,
-	}
-};
-
-static int __init hpled_init_module(void)
-{
-	int ret;
-
-	if (acpi_disabled)
-		return -ENODEV;
-
-	ret = acpi_bus_register_driver(&leds_hp_driver);
-	if (ret < 0)
-		return ret;
-
-	printk(KERN_INFO DRIVER_NAME " driver loaded.\n");
-
-	return 0;
-}
-
-static void __exit hpled_exit_module(void)
-{
-	acpi_bus_unregister_driver(&leds_hp_driver);
-}
-
-MODULE_DESCRIPTION("Driver for HP disk protection LED");
-MODULE_AUTHOR("Pavel Machek <pavel@suse.cz>");
-MODULE_LICENSE("GPL");
-
-module_init(hpled_init_module);
-module_exit(hpled_exit_module);
diff --git a/drivers/message/fusion/lsi/mpi.h b/drivers/message/fusion/lsi/mpi.h
index 10b6ef7..11c0f46 100644
--- a/drivers/message/fusion/lsi/mpi.h
+++ b/drivers/message/fusion/lsi/mpi.h
@@ -6,7 +6,7 @@
  *          Title:  MPI Message independent structures and definitions
  *  Creation Date:  July 27, 2000
  *
- *    mpi.h Version:  01.05.13
+ *    mpi.h Version:  01.05.16
  *
  *  Version History
  *  ---------------
@@ -79,6 +79,9 @@
  *  03-27-06  01.05.11  Bumped MPI_HEADER_VERSION_UNIT.
  *  10-11-06  01.05.12  Bumped MPI_HEADER_VERSION_UNIT.
  *  05-24-07  01.05.13  Bumped MPI_HEADER_VERSION_UNIT.
+ *  08-07-07  01.05.14  Bumped MPI_HEADER_VERSION_UNIT.
+ *  01-15-08  01.05.15  Bumped MPI_HEADER_VERSION_UNIT.
+ *  03-28-08  01.05.16  Bumped MPI_HEADER_VERSION_UNIT.
  *  --------------------------------------------------------------------------
  */
 
@@ -109,7 +112,7 @@
 /* Note: The major versions of 0xe0 through 0xff are reserved */
 
 /* versioning for this MPI header set */
-#define MPI_HEADER_VERSION_UNIT             (0x10)
+#define MPI_HEADER_VERSION_UNIT             (0x13)
 #define MPI_HEADER_VERSION_DEV              (0x00)
 #define MPI_HEADER_VERSION_UNIT_MASK        (0xFF00)
 #define MPI_HEADER_VERSION_UNIT_SHIFT       (8)
diff --git a/drivers/message/fusion/lsi/mpi_cnfg.h b/drivers/message/fusion/lsi/mpi_cnfg.h
index b2db333..013c7d8 100644
--- a/drivers/message/fusion/lsi/mpi_cnfg.h
+++ b/drivers/message/fusion/lsi/mpi_cnfg.h
@@ -6,7 +6,7 @@
  *          Title:  MPI Config message, structures, and Pages
  *  Creation Date:  July 27, 2000
  *
- *    mpi_cnfg.h Version:  01.05.15
+ *    mpi_cnfg.h Version:  01.05.18
  *
  *  Version History
  *  ---------------
@@ -308,6 +308,20 @@
  *                      Expander Page 0 Flags field.
  *                      Fixed define for
  *                      MPI_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED.
+ *  08-07-07  01.05.16  Added MPI_IOCPAGE6_CAP_FLAGS_MULTIPORT_DRIVE_SUPPORT
+ *                      define.
+ *                      Added BIOS Page 4 structure.
+ *                      Added MPI_RAID_PHYS_DISK1_PATH_MAX define for RAID
+ *                      Physcial Disk Page 1.
+ *  01-15-07  01.05.17  Added additional bit defines for ExtFlags field of
+ *                      Manufacturing Page 4.
+ *                      Added Solid State Drives Supported bit to IOC Page 6
+ *                      Capabilities Flags.
+ *                      Added new value for AccessStatus field of SAS Device
+ *                      Page 0 (_SATA_NEEDS_INITIALIZATION).
+ *  03-28-08  01.05.18  Defined new bits in Manufacturing Page 4 ExtFlags field
+ *                      to control coercion size and the mixing of SAS and SATA
+ *                      SSD drives.
  *  --------------------------------------------------------------------------
  */
 
@@ -686,6 +700,14 @@
 #define MPI_MANPAGE4_IR_NO_MIX_SAS_SATA                 (0x01)
 
 /* defines for the ExtFlags field */
+#define MPI_MANPAGE4_EXTFLAGS_MASK_COERCION_SIZE        (0x0180)
+#define MPI_MANPAGE4_EXTFLAGS_SHIFT_COERCION_SIZE       (7)
+#define MPI_MANPAGE4_EXTFLAGS_1GB_COERCION_SIZE         (0)
+#define MPI_MANPAGE4_EXTFLAGS_128MB_COERCION_SIZE       (1)
+
+#define MPI_MANPAGE4_EXTFLAGS_NO_MIX_SSD_SAS_SATA       (0x0040)
+#define MPI_MANPAGE4_EXTFLAGS_MIX_SSD_AND_NON_SSD       (0x0020)
+#define MPI_MANPAGE4_EXTFLAGS_DUAL_PORT_SUPPORT         (0x0010)
 #define MPI_MANPAGE4_EXTFLAGS_HIDE_NON_IR_METADATA      (0x0008)
 #define MPI_MANPAGE4_EXTFLAGS_SAS_CACHE_DISABLE         (0x0004)
 #define MPI_MANPAGE4_EXTFLAGS_SATA_CACHE_DISABLE        (0x0002)
@@ -1159,6 +1181,8 @@
 
 /* IOC Page 6 Capabilities Flags */
 
+#define MPI_IOCPAGE6_CAP_FLAGS_SSD_SUPPORT              (0x00000020)
+#define MPI_IOCPAGE6_CAP_FLAGS_MULTIPORT_DRIVE_SUPPORT  (0x00000010)
 #define MPI_IOCPAGE6_CAP_FLAGS_DISABLE_SMART_POLLING    (0x00000008)
 
 #define MPI_IOCPAGE6_CAP_FLAGS_MASK_METADATA_SIZE       (0x00000006)
@@ -1428,6 +1452,15 @@
 #define MPI_BIOSPAGE2_FORM_SAS_WWN                      (0x05)
 #define MPI_BIOSPAGE2_FORM_ENCLOSURE_SLOT               (0x06)
 
+typedef struct _CONFIG_PAGE_BIOS_4
+{
+    CONFIG_PAGE_HEADER      Header;                     /* 00h */
+    U64                     ReassignmentBaseWWID;       /* 04h */
+} CONFIG_PAGE_BIOS_4, MPI_POINTER PTR_CONFIG_PAGE_BIOS_4,
+  BIOSPage4_t, MPI_POINTER pBIOSPage4_t;
+
+#define MPI_BIOSPAGE4_PAGEVERSION                       (0x00)
+
 
 /****************************************************************************
 *   SCSI Port Config Pages
@@ -2419,6 +2452,15 @@
 #define MPI_RAID_PHYSDISK1_FLAG_BROKEN          (0x0002)
 #define MPI_RAID_PHYSDISK1_FLAG_INVALID         (0x0001)
 
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check Header.PageLength or NumPhysDiskPaths at runtime.
+ */
+#ifndef MPI_RAID_PHYS_DISK1_PATH_MAX
+#define MPI_RAID_PHYS_DISK1_PATH_MAX    (1)
+#endif
+
 typedef struct _CONFIG_PAGE_RAID_PHYS_DISK_1
 {
     CONFIG_PAGE_HEADER              Header;             /* 00h */
@@ -2426,7 +2468,7 @@
     U8                              PhysDiskNum;        /* 05h */
     U16                             Reserved2;          /* 06h */
     U32                             Reserved1;          /* 08h */
-    RAID_PHYS_DISK1_PATH            Path[1];            /* 0Ch */
+    RAID_PHYS_DISK1_PATH            Path[MPI_RAID_PHYS_DISK1_PATH_MAX];/* 0Ch */
 } CONFIG_PAGE_RAID_PHYS_DISK_1, MPI_POINTER PTR_CONFIG_PAGE_RAID_PHYS_DISK_1,
   RaidPhysDiskPage1_t, MPI_POINTER pRaidPhysDiskPage1_t;
 
@@ -2844,6 +2886,7 @@
 #define MPI_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED            (0x01)
 #define MPI_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED      (0x02)
 #define MPI_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT   (0x03)
+#define MPI_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION   (0x04)
 /* specific values for SATA Init failures */
 #define MPI_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN                 (0x10)
 #define MPI_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT    (0x11)
diff --git a/drivers/message/fusion/lsi/mpi_fc.h b/drivers/message/fusion/lsi/mpi_fc.h
index 627acfb..7d663ce 100644
--- a/drivers/message/fusion/lsi/mpi_fc.h
+++ b/drivers/message/fusion/lsi/mpi_fc.h
@@ -1,5 +1,5 @@
 /*
- *  Copyright (c) 2000-2004 LSI Corporation.
+ *  Copyright (c) 2000-2008 LSI Corporation.
  *
  *
  *           Name:  mpi_fc.h
diff --git a/drivers/message/fusion/lsi/mpi_history.txt b/drivers/message/fusion/lsi/mpi_history.txt
index 3f15fcf..693e4b5 100644
--- a/drivers/message/fusion/lsi/mpi_history.txt
+++ b/drivers/message/fusion/lsi/mpi_history.txt
@@ -3,28 +3,28 @@
  MPI Header File Change History
  ==============================
 
- Copyright (c) 2000-2007 LSI Corporation.
+ Copyright (c) 2000-2008 LSI Corporation.
 
  ---------------------------------------
- Header Set Release Version:    01.05.16
- Header Set Release Date:       05-24-07
+ Header Set Release Version:    01.05.19
+ Header Set Release Date:       03-28-08
  ---------------------------------------
 
  Filename               Current version     Prior version
  ----------             ---------------     -------------
- mpi.h                  01.05.13            01.05.12
- mpi_ioc.h              01.05.14            01.05.13
- mpi_cnfg.h             01.05.15            01.05.14
+ mpi.h                  01.05.16            01.05.15
+ mpi_ioc.h              01.05.16            01.05.15
+ mpi_cnfg.h             01.05.18            01.05.17
  mpi_init.h             01.05.09            01.05.09
  mpi_targ.h             01.05.06            01.05.06
  mpi_fc.h               01.05.01            01.05.01
  mpi_lan.h              01.05.01            01.05.01
- mpi_raid.h             01.05.03            01.05.03
+ mpi_raid.h             01.05.05            01.05.05
  mpi_tool.h             01.05.03            01.05.03
  mpi_inb.h              01.05.01            01.05.01
- mpi_sas.h              01.05.04            01.05.04
+ mpi_sas.h              01.05.05            01.05.05
  mpi_type.h             01.05.02            01.05.02
- mpi_history.txt        01.05.14            01.05.14
+ mpi_history.txt        01.05.19            01.05.18
 
 
  *  Date      Version   Description
@@ -96,6 +96,9 @@
  *  03-27-06  01.05.11  Bumped MPI_HEADER_VERSION_UNIT.
  *  10-11-06  01.05.12  Bumped MPI_HEADER_VERSION_UNIT.
  *  05-24-07  01.05.13  Bumped MPI_HEADER_VERSION_UNIT.
+ *  08-07-07  01.05.14  Bumped MPI_HEADER_VERSION_UNIT.
+ *  01-15-08  01.05.15  Bumped MPI_HEADER_VERSION_UNIT.
+ *  03-28-08  01.05.16  Bumped MPI_HEADER_VERSION_UNIT.
  *  --------------------------------------------------------------------------
 
 mpi_ioc.h
@@ -127,7 +130,7 @@
  *  08-08-01  01.02.01  Original release for v1.2 work.
  *                      New format for FWVersion and ProductId in
  *                      MSG_IOC_FACTS_REPLY and MPI_FW_HEADER.
- *  08-31-01  01.02.02  Added event MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE and
+ *  08-31-01  01.02.02  Addded event MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE and
  *                      related structure and defines.
  *                      Added event MPI_EVENT_ON_BUS_TIMER_EXPIRED.
  *                      Added MPI_IOCINIT_FLAGS_DISCARD_FW_IMAGE.
@@ -187,7 +190,7 @@
  *  10-11-06  01.05.12  Added MPI_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED.
  *                      Added MaxInitiators field to PortFacts reply.
  *                      Added SAS Device Status Change ReasonCode for
- *                      asynchronous notification.
+ *                      asynchronous notificaiton.
  *                      Added MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE and event
  *                      data structure.
  *                      Added new ImageType values for FWDownload and FWUpload
@@ -199,6 +202,16 @@
  *                      added _MULTI_PORT_DOMAIN.
  *  05-24-07  01.05.14  Added Common Boot Block type to FWDownload Request.
  *                      Added Common Boot Block type to FWUpload Request.
+ *  08-07-07  01.05.15  Added MPI_EVENT_SAS_INIT_RC_REMOVED define.
+ *                      Added MPI_EVENT_IR2_RC_DUAL_PORT_ADDED and
+ *                      MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED for IR2 event data.
+ *                      Added SASAddress field to SAS Initiator Device Table
+ *                      Overflow event data structure.
+ *  03-28-08  01.05.16  Added two new ReasonCode values to SAS Device Status
+ *                      Change Event data to indicate completion of internally
+ *                      generated task management.
+ *                      Added MPI_EVENT_DSCVRY_ERR_DS_SATA_INIT_FAILURE define.
+ *                      Added MPI_EVENT_SAS_INIT_RC_INACCESSIBLE define.
  *  --------------------------------------------------------------------------
 
 mpi_cnfg.h
@@ -213,7 +226,7 @@
  *                      Added _RESPONSE_ID_MASK definition to SCSI_PORT_1
  *                      page and updated the page version.
  *                      Added Information field and _INFO_PARAMS_NEGOTIATED
- *                      definition to SCSI_DEVICE_0 page.
+ *                      definitionto SCSI_DEVICE_0 page.
  *  06-22-00  01.00.03  Removed batch controls from LAN_0 page and updated the
  *                      page version.
  *                      Added BucketsRemaining to LAN_1 page, redefined the
@@ -496,6 +509,20 @@
  *                      Expander Page 0 Flags field.
  *                      Fixed define for
  *                      MPI_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED.
+ *  08-07-07  01.05.16  Added MPI_IOCPAGE6_CAP_FLAGS_MULTIPORT_DRIVE_SUPPORT
+ *                      define.
+ *                      Added BIOS Page 4 structure.
+ *                      Added MPI_RAID_PHYS_DISK1_PATH_MAX define for RAID
+ *                      Physcial Disk Page 1.
+ *  01-15-07  01.05.17  Added additional bit defines for ExtFlags field of
+ *                      Manufacturing Page 4.
+ *                      Added Solid State Drives Supported bit to IOC Page 6
+ *                      Capabilities Flags.
+ *                      Added new value for AccessStatus field of SAS Device
+ *                      Page 0 (_SATA_NEEDS_INITIALIZATION).
+ *  03-28-08  01.05.18  Defined new bits in Manufacturing Page 4 ExtFlags field
+ *                      to control coercion size and the mixing of SAS and SATA
+ *                      SSD drives.
  *  --------------------------------------------------------------------------
 
 mpi_init.h
@@ -661,6 +688,9 @@
  *                      _SET_RESYNC_RATE and _SET_DATA_SCRUB_RATE.
  *  02-28-07  01.05.03  Added new RAID Action, Device FW Update Mode, and
  *                      associated defines.
+ *  08-07-07  01.05.04  Added Disable Full Rebuild bit to the ActionDataWord
+ *                      for the RAID Action MPI_RAID_ACTION_DISABLE_VOLUME.
+ *  01-15-08  01.05.05  Added define for MPI_RAID_ACTION_SET_VOLUME_NAME.
  *  --------------------------------------------------------------------------
 
 mpi_tool.h
@@ -694,6 +724,10 @@
  *                      reply.
  *  10-11-06  01.05.04  Fixed the name of a define for Operation field of SAS IO
  *                      Unit Control request.
+ *  01-15-08  01.05.05  Added support for MPI_SAS_OP_SET_IOC_PARAMETER,
+ *                      including adding IOCParameter and IOCParameter value
+ *                      fields to SAS IO Unit Control Request.
+ *                      Added MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC define.
  *  --------------------------------------------------------------------------
 
 mpi_type.h
@@ -709,20 +743,20 @@
 
 mpi_history.txt         Parts list history
 
-Filename    01.05.15   01.05.15
-----------  --------   --------
-mpi.h       01.05.12   01.05.13
-mpi_ioc.h   01.05.13   01.05.14
-mpi_cnfg.h  01.05.14   01.05.15
-mpi_init.h  01.05.09   01.05.09
-mpi_targ.h  01.05.06   01.05.06
-mpi_fc.h    01.05.01   01.05.01
-mpi_lan.h   01.05.01   01.05.01
-mpi_raid.h  01.05.03   01.05.03
-mpi_tool.h  01.05.03   01.05.03
-mpi_inb.h   01.05.01   01.05.01
-mpi_sas.h   01.05.04   01.05.04
-mpi_type.h  01.05.02   01.05.02
+Filename    01.05.19   01.05.18   01.05.17   01.05.16   01.05.15
+----------  --------   --------   --------   --------   --------
+mpi.h       01.05.16   01.05.15   01.05.14   01.05.13   01.05.12
+mpi_ioc.h   01.05.16   01.05.15   01.05.15   01.05.14   01.05.13
+mpi_cnfg.h  01.05.18   01.05.17   01.05.16   01.05.15   01.05.14
+mpi_init.h  01.05.09   01.05.09   01.05.09   01.05.09   01.05.09
+mpi_targ.h  01.05.06   01.05.06   01.05.06   01.05.06   01.05.06
+mpi_fc.h    01.05.01   01.05.01   01.05.01   01.05.01   01.05.01
+mpi_lan.h   01.05.01   01.05.01   01.05.01   01.05.01   01.05.01
+mpi_raid.h  01.05.05   01.05.05   01.05.04   01.05.03   01.05.03
+mpi_tool.h  01.05.03   01.05.03   01.05.03   01.05.03   01.05.03
+mpi_inb.h   01.05.01   01.05.01   01.05.01   01.05.01   01.05.01
+mpi_sas.h   01.05.05   01.05.05   01.05.04   01.05.04   01.05.04
+mpi_type.h  01.05.02   01.05.02   01.05.02   01.05.02   01.05.02
 
 Filename    01.05.14   01.05.13   01.05.12   01.05.11   01.05.10   01.05.09
 ----------  --------   --------   --------   --------   --------   --------
diff --git a/drivers/message/fusion/lsi/mpi_init.h b/drivers/message/fusion/lsi/mpi_init.h
index a9e3693..4295d06 100644
--- a/drivers/message/fusion/lsi/mpi_init.h
+++ b/drivers/message/fusion/lsi/mpi_init.h
@@ -1,5 +1,5 @@
 /*
- *  Copyright (c) 2000-2007 LSI Corporation.
+ *  Copyright (c) 2000-2008 LSI Corporation.
  *
  *
  *           Name:  mpi_init.h
diff --git a/drivers/message/fusion/lsi/mpi_ioc.h b/drivers/message/fusion/lsi/mpi_ioc.h
index 5cbb6bd..8faa4fa 100644
--- a/drivers/message/fusion/lsi/mpi_ioc.h
+++ b/drivers/message/fusion/lsi/mpi_ioc.h
@@ -1,12 +1,12 @@
 /*
- *  Copyright (c) 2000-2007 LSI Corporation.
+ *  Copyright (c) 2000-2008 LSI Corporation.
  *
  *
  *           Name:  mpi_ioc.h
  *          Title:  MPI IOC, Port, Event, FW Download, and FW Upload messages
  *  Creation Date:  August 11, 2000
  *
- *    mpi_ioc.h Version:  01.05.14
+ *    mpi_ioc.h Version:  01.05.16
  *
  *  Version History
  *  ---------------
@@ -113,6 +113,16 @@
  *                      added _MULTI_PORT_DOMAIN.
  *  05-24-07  01.05.14  Added Common Boot Block type to FWDownload Request.
  *                      Added Common Boot Block type to FWUpload Request.
+ *  08-07-07  01.05.15  Added MPI_EVENT_SAS_INIT_RC_REMOVED define.
+ *                      Added MPI_EVENT_IR2_RC_DUAL_PORT_ADDED and
+ *                      MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED for IR2 event data.
+ *                      Added SASAddress field to SAS Initiator Device Table
+ *                      Overflow event data structure.
+ *  03-28-08  01.05.16  Added two new ReasonCode values to SAS Device Status
+ *                      Change Event data to indicate completion of internally
+ *                      generated task management.
+ *                      Added MPI_EVENT_DSCVRY_ERR_DS_SATA_INIT_FAILURE define.
+ *                      Added MPI_EVENT_SAS_INIT_RC_INACCESSIBLE define.
  *  --------------------------------------------------------------------------
  */
 
@@ -612,6 +622,8 @@
 #define MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL   (0x0B)
 #define MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL       (0x0C)
 #define MPI_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION        (0x0D)
+#define MPI_EVENT_SAS_DEV_STAT_RC_CMPL_INTERNAL_DEV_RESET   (0x0E)
+#define MPI_EVENT_SAS_DEV_STAT_RC_CMPL_TASK_ABORT_INTERNAL  (0x0F)
 
 
 /* SCSI Event data for Queue Full event */
@@ -708,6 +720,8 @@
 #define MPI_EVENT_IR2_RC_PD_REMOVED                 (0x05)
 #define MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED       (0x06)
 #define MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR       (0x07)
+#define MPI_EVENT_IR2_RC_DUAL_PORT_ADDED            (0x08)
+#define MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED          (0x09)
 
 /* defines for logical disk states */
 #define MPI_LD_STATE_OPTIMAL                        (0x00)
@@ -867,6 +881,7 @@
 #define MPI_EVENT_DSCVRY_ERR_DS_UNSUPPORTED_DEVICE          (0x00000800)
 #define MPI_EVENT_DSCVRY_ERR_DS_MAX_SATA_TARGETS            (0x00001000)
 #define MPI_EVENT_DSCVRY_ERR_DS_MULTI_PORT_DOMAIN           (0x00002000)
+#define MPI_EVENT_DSCVRY_ERR_DS_SATA_INIT_FAILURE           (0x00004000)
 
 /* SAS SMP Error Event data */
 
@@ -902,6 +917,8 @@
 
 /* defines for the ReasonCode field of the SAS Initiator Device Status Change event */
 #define MPI_EVENT_SAS_INIT_RC_ADDED                 (0x01)
+#define MPI_EVENT_SAS_INIT_RC_REMOVED               (0x02)
+#define MPI_EVENT_SAS_INIT_RC_INACCESSIBLE          (0x03)
 
 /* SAS Initiator Device Table Overflow Event data */
 
@@ -910,6 +927,7 @@
     U8                      MaxInit;                    /* 00h */
     U8                      CurrentInit;                /* 01h */
     U16                     Reserved1;                  /* 02h */
+    U64                     SASAddress;                 /* 04h */
 } EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
   MPI_POINTER PTR_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
   MpiEventDataSasInitTableOverflow_t,
diff --git a/drivers/message/fusion/lsi/mpi_lan.h b/drivers/message/fusion/lsi/mpi_lan.h
index 03253b5..f41fcb6 100644
--- a/drivers/message/fusion/lsi/mpi_lan.h
+++ b/drivers/message/fusion/lsi/mpi_lan.h
@@ -1,5 +1,5 @@
 /*
- *  Copyright (c) 2000-2004 LSI Corporation.
+ *  Copyright (c) 2000-2008 LSI Corporation.
  *
  *
  *           Name:  mpi_lan.h
diff --git a/drivers/message/fusion/lsi/mpi_log_fc.h b/drivers/message/fusion/lsi/mpi_log_fc.h
index e4dafce..face6e7 100644
--- a/drivers/message/fusion/lsi/mpi_log_fc.h
+++ b/drivers/message/fusion/lsi/mpi_log_fc.h
@@ -1,5 +1,5 @@
 /*
- *  Copyright (c) 2000-2001 LSI Corporation. All rights reserved.
+ *  Copyright (c) 2000-2008 LSI Corporation. All rights reserved.
  *
  *  NAME:           fc_log.h
  *  SUMMARY:        MPI IocLogInfo definitions for the SYMFC9xx chips
diff --git a/drivers/message/fusion/lsi/mpi_log_sas.h b/drivers/message/fusion/lsi/mpi_log_sas.h
index af9da03..691620d 100644
--- a/drivers/message/fusion/lsi/mpi_log_sas.h
+++ b/drivers/message/fusion/lsi/mpi_log_sas.h
@@ -1,6 +1,6 @@
 /***************************************************************************
  *                                                                         *
- *  Copyright 2003 LSI Corporation.  All rights reserved.            *
+ *  Copyright (c) 2000-2008 LSI Corporation.  All rights reserved.         *
  *                                                                         *
  * Description                                                             *
  * ------------                                                            *
@@ -73,6 +73,8 @@
 #define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_EXACT_IO          (0x00070004)
 #define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_EXACT_IO_REQ      (0x00070005)
 
+#define IOP_LOGINFO_CODE_LOG_TIMESTAMP_EVENT                 (0x00080000)
+
 /****************************************************************************/
 /* PL LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = PL            */
 /****************************************************************************/
@@ -92,7 +94,7 @@
 #define PL_LOGINFO_SUB_CODE_OPEN_FAIL_OPEN_TIMEOUT_EXP       (0x0000000C)
 #define PL_LOGINFO_SUB_CODE_OPEN_FAIL_UNUSED_0D              (0x0000000D)
 #define PL_LOGINFO_SUB_CODE_OPEN_FAIL_DVTBLE_ACCSS_FAIL      (0x0000000E)
-#define PL_LOGINFO_SUB CODE_OPEN_FAIL_BAD_DEST               (0x00000011)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_BAD_DEST               (0x00000011)
 #define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RATE_NOT_SUPP          (0x00000012)
 #define PL_LOGINFO_SUB_CODE_OPEN_FAIL_PROT_NOT_SUPP          (0x00000013)
 #define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RESERVED_ABANDON0      (0x00000014)
@@ -159,10 +161,11 @@
 
 #define PL_LOGINFO_SUB_CODE_INVALID_SGL                      (0x00000200)
 #define PL_LOGINFO_SUB_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH    (0x00000300)
-#define PL_LOGINFO_SUB_CODE_FRAME_XFER_ERROR                 (0x00000400) /* Bits 0-3 encode Transport Status Register (offset 0x08) */
-                                                                          /* Bit 0 is Status Bit 0: FrameXferErr */
-                                                                          /* Bit 1 & 2 are Status Bits 16 and 17: FrameXmitErrStatus */
-                                                                          /* Bit 3 is Status Bit 18 WriteDataLengthGTDataLengthErr */
+#define PL_LOGINFO_SUB_CODE_FRAME_XFER_ERROR                 (0x00000400)
+/* Bits 0-3 encode Transport Status Register (offset 0x08) */
+/* Bit 0 is Status Bit 0: FrameXferErr */
+/* Bit 1 & 2 are Status Bits 16 and 17: FrameXmitErrStatus */
+/* Bit 3 is Status Bit 18 WriteDataLenghtGTDataLengthErr */
 
 #define PL_LOGINFO_SUB_CODE_TX_FM_CONNECTED_LOW              (0x00000500)
 #define PL_LOGINFO_SUB_CODE_SATA_NON_NCQ_RW_ERR_BIT_SET      (0x00000600)
@@ -177,6 +180,11 @@
 #define PL_LOGINFO_SUB_CODE_DISCOVERY_REMOTE_SEP_RESET       (0x00000E01)
 #define PL_LOGINFO_SUB_CODE_SECOND_OPEN                      (0x00000F00)
 #define PL_LOGINFO_SUB_CODE_DSCVRY_SATA_INIT_TIMEOUT         (0x00001000)
+#define PL_LOGINFO_SUB_CODE_BREAK_ON_SATA_CONNECTION         (0x00002000)
+/* not currently used in mainline */
+#define PL_LOGINFO_SUB_CODE_BREAK_ON_STUCK_LINK              (0x00003000)
+#define PL_LOGINFO_SUB_CODE_BREAK_ON_STUCK_LINK_AIP          (0x00004000)
+#define PL_LOGINFO_SUB_CODE_BREAK_ON_INCOMPLETE_BREAK_RCVD   (0x00005000)
 
 #define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_FAILURE          (0x00200000) /* Can't get SMP Frame */
 #define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR             (0x00200010) /* Error occured on SMP Read */
@@ -243,6 +251,8 @@
 #define IR_LOGINFO_VOLUME_ACTIVATE_VOLUME_FAILED               (0x00010014)
 /* Activation failed trying to import the volume */
 #define IR_LOGINFO_VOLUME_ACTIVATING_IMPORT_VOLUME_FAILED      (0x00010015)
+/* Activation failed trying to import the volume */
+#define IR_LOGINFO_VOLUME_ACTIVATING_TOO_MANY_PHYS_DISKS       (0x00010016)
 
 /* Phys Disk failed, too many phys disks */
 #define IR_LOGINFO_PHYSDISK_CREATE_TOO_MANY_DISKS              (0x00010020)
@@ -285,6 +295,21 @@
 /* Compatibility Error : IME size limited to < 2TB */
 #define IR_LOGINFO_COMPAT_ERROR_IME_VOL_NOT_CURRENTLY_SUPPORTED (0x0001003D)
 
+/* Device Firmware Update: DFU can only be started once */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_DFU_IN_PROGRESS            (0x00010050)
+/* Device Firmware Update: Volume must be Optimal/Active/non-Quiesced */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_DEVICE_IN_INVALID_STATE    (0x00010051)
+/* Device Firmware Update: DFU Timeout cannot be zero */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_INVALID_TIMEOUT            (0x00010052)
+/* Device Firmware Update: CREATE TIMER FAILED */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_NO_TIMERS                  (0x00010053)
+/* Device Firmware Update: Failed to read SAS_IO_UNIT_PG_1 */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_READING_CFG_PAGE           (0x00010054)
+/* Device Firmware Update: Invalid SAS_IO_UNIT_PG_1 value(s) */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_PORT_IO_TIMEOUTS_REQUIRED  (0x00010055)
+/* Device Firmware Update: Unable to allocate memory for page */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_ALLOC_CFG_PAGE             (0x00010056)
+
 
 /****************************************************************************/
 /* Defines for convenience                                                  */
diff --git a/drivers/message/fusion/lsi/mpi_raid.h b/drivers/message/fusion/lsi/mpi_raid.h
index 2856108..add60cc 100644
--- a/drivers/message/fusion/lsi/mpi_raid.h
+++ b/drivers/message/fusion/lsi/mpi_raid.h
@@ -1,12 +1,12 @@
 /*
- *  Copyright (c) 2001-2007 LSI Corporation.
+ *  Copyright (c) 2001-2008 LSI Corporation.
  *
  *
  *           Name:  mpi_raid.h
  *          Title:  MPI RAID message and structures
  *  Creation Date:  February 27, 2001
  *
- *    mpi_raid.h Version:  01.05.03
+ *    mpi_raid.h Version:  01.05.05
  *
  *  Version History
  *  ---------------
@@ -34,6 +34,9 @@
  *                      _SET_RESYNC_RATE and _SET_DATA_SCRUB_RATE.
  *  02-28-07  01.05.03  Added new RAID Action, Device FW Update Mode, and
  *                      associated defines.
+ *  08-07-07  01.05.04  Added Disable Full Rebuild bit to the ActionDataWord
+ *                      for the RAID Action MPI_RAID_ACTION_DISABLE_VOLUME.
+ *  01-15-08  01.05.05  Added define for MPI_RAID_ACTION_SET_VOLUME_NAME.
  *  --------------------------------------------------------------------------
  */
 
@@ -93,6 +96,7 @@
 #define MPI_RAID_ACTION_SET_RESYNC_RATE             (0x13)
 #define MPI_RAID_ACTION_SET_DATA_SCRUB_RATE         (0x14)
 #define MPI_RAID_ACTION_DEVICE_FW_UPDATE_MODE       (0x15)
+#define MPI_RAID_ACTION_SET_VOLUME_NAME             (0x16)
 
 /* ActionDataWord defines for use with MPI_RAID_ACTION_CREATE_VOLUME action */
 #define MPI_RAID_ACTION_ADATA_DO_NOT_SYNC           (0x00000001)
@@ -105,6 +109,9 @@
 #define MPI_RAID_ACTION_ADATA_KEEP_LBA0             (0x00000000)
 #define MPI_RAID_ACTION_ADATA_ZERO_LBA0             (0x00000002)
 
+/* ActionDataWord defines for use with MPI_RAID_ACTION_DISABLE_VOLUME action */
+#define MPI_RAID_ACTION_ADATA_DISABLE_FULL_REBUILD  (0x00000001)
+
 /* ActionDataWord defines for use with MPI_RAID_ACTION_ACTIVATE_VOLUME action */
 #define MPI_RAID_ACTION_ADATA_INACTIVATE_ALL        (0x00000001)
 
diff --git a/drivers/message/fusion/lsi/mpi_sas.h b/drivers/message/fusion/lsi/mpi_sas.h
index 33fca83..ab41003 100644
--- a/drivers/message/fusion/lsi/mpi_sas.h
+++ b/drivers/message/fusion/lsi/mpi_sas.h
@@ -1,12 +1,12 @@
 /*
- *  Copyright (c) 2004-2006 LSI Corporation.
+ *  Copyright (c) 2004-2008 LSI Corporation.
  *
  *
  *           Name:  mpi_sas.h
  *          Title:  MPI Serial Attached SCSI structures and definitions
  *  Creation Date:  August 19, 2004
  *
- *    mpi_sas.h Version:  01.05.04
+ *    mpi_sas.h Version:  01.05.05
  *
  *  Version History
  *  ---------------
@@ -23,6 +23,10 @@
  *                      reply.
  *  10-11-06  01.05.04  Fixed the name of a define for Operation field of SAS IO
  *                      Unit Control request.
+ *  01-15-08  01.05.05  Added support for MPI_SAS_OP_SET_IOC_PARAMETER,
+ *                      including adding IOCParameter and IOCParameter value
+ *                      fields to SAS IO Unit Control Request.
+ *                      Added MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC define.
  *  --------------------------------------------------------------------------
  */
 
@@ -60,6 +64,8 @@
  * Values for the SAS DeviceInfo field used in SAS Device Status Change Event
  * data and SAS IO Unit Configuration pages.
  */
+#define MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC    (0xF0000000)
+
 #define MPI_SAS_DEVICE_INFO_SEP                 (0x00004000)
 #define MPI_SAS_DEVICE_INFO_ATAPI_DEVICE        (0x00002000)
 #define MPI_SAS_DEVICE_INFO_LSI_DEVICE          (0x00001000)
@@ -216,7 +222,7 @@
     U8                      ChainOffset;        /* 02h */
     U8                      Function;           /* 03h */
     U16                     DevHandle;          /* 04h */
-    U8                      Reserved3;          /* 06h */
+    U8                      IOCParameter;       /* 06h */
     U8                      MsgFlags;           /* 07h */
     U32                     MsgContext;         /* 08h */
     U8                      TargetID;           /* 0Ch */
@@ -225,7 +231,7 @@
     U8                      PrimFlags;          /* 0Fh */
     U32                     Primitive;          /* 10h */
     U64                     SASAddress;         /* 14h */
-    U32                     Reserved4;          /* 1Ch */
+    U32                     IOCParameterValue;  /* 1Ch */
 } MSG_SAS_IOUNIT_CONTROL_REQUEST, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REQUEST,
   SasIoUnitControlRequest_t, MPI_POINTER pSasIoUnitControlRequest_t;
 
@@ -241,6 +247,8 @@
 #define MPI_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL  (0x0C)
 #define MPI_SAS_OP_TRANSMIT_REMOVE_DEVICE       (0x0D)  /* obsolete name */
 #define MPI_SAS_OP_REMOVE_DEVICE                (0x0D)
+#define MPI_SAS_OP_SET_IOC_PARAMETER            (0x0E)
+#define MPI_SAS_OP_PRODUCT_SPECIFIC_MIN         (0x80)
 
 /* values for the PrimFlags field */
 #define MPI_SAS_PRIMFLAGS_SINGLE                (0x08)
@@ -256,7 +264,7 @@
     U8                      MsgLength;          /* 02h */
     U8                      Function;           /* 03h */
     U16                     DevHandle;          /* 04h */
-    U8                      Reserved3;          /* 06h */
+    U8                      IOCParameter;       /* 06h */
     U8                      MsgFlags;           /* 07h */
     U32                     MsgContext;         /* 08h */
     U16                     Reserved4;          /* 0Ch */
diff --git a/drivers/message/fusion/lsi/mpi_targ.h b/drivers/message/fusion/lsi/mpi_targ.h
index ff8c37d..c3dea7f 100644
--- a/drivers/message/fusion/lsi/mpi_targ.h
+++ b/drivers/message/fusion/lsi/mpi_targ.h
@@ -1,5 +1,5 @@
 /*
- *  Copyright (c) 2000-2004 LSI Corporation.
+ *  Copyright (c) 2000-2008 LSI Corporation.
  *
  *
  *           Name:  mpi_targ.h
diff --git a/drivers/message/fusion/lsi/mpi_tool.h b/drivers/message/fusion/lsi/mpi_tool.h
index 8834ae6..53cd715 100644
--- a/drivers/message/fusion/lsi/mpi_tool.h
+++ b/drivers/message/fusion/lsi/mpi_tool.h
@@ -1,5 +1,5 @@
 /*
- *  Copyright (c) 2001-2005 LSI Corporation.
+ *  Copyright (c) 2001-2008 LSI Corporation.
  *
  *
  *           Name:  mpi_tool.h
diff --git a/drivers/message/fusion/lsi/mpi_type.h b/drivers/message/fusion/lsi/mpi_type.h
index 08dad9c..888b26d 100644
--- a/drivers/message/fusion/lsi/mpi_type.h
+++ b/drivers/message/fusion/lsi/mpi_type.h
@@ -1,12 +1,12 @@
 /*
- *  Copyright (c) 2000-2004 LSI Corporation.
+ *  Copyright (c) 2000-2008 LSI Corporation.
  *
  *
  *           Name:  mpi_type.h
  *          Title:  MPI Basic type definitions
  *  Creation Date:  June 6, 2000
  *
- *    mpi_type.h Version:  01.05.01
+ *    mpi_type.h Version:  01.05.02
  *
  *  Version History
  *  ---------------
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index c4e8b9a..96ac883 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -79,9 +79,22 @@
 /*
  *  cmd line parameters
  */
-static int mpt_msi_enable = -1;
-module_param(mpt_msi_enable, int, 0);
-MODULE_PARM_DESC(mpt_msi_enable, " MSI Support Enable (default=0)");
+
+static int mpt_msi_enable_spi;
+module_param(mpt_msi_enable_spi, int, 0);
+MODULE_PARM_DESC(mpt_msi_enable_spi, " Enable MSI Support for SPI \
+		controllers (default=0)");
+
+static int mpt_msi_enable_fc;
+module_param(mpt_msi_enable_fc, int, 0);
+MODULE_PARM_DESC(mpt_msi_enable_fc, " Enable MSI Support for FC \
+		controllers (default=0)");
+
+static int mpt_msi_enable_sas;
+module_param(mpt_msi_enable_sas, int, 1);
+MODULE_PARM_DESC(mpt_msi_enable_sas, " Enable MSI Support for SAS \
+		controllers (default=1)");
+
 
 static int mpt_channel_mapping;
 module_param(mpt_channel_mapping, int, 0);
@@ -91,7 +104,17 @@
 static int mpt_set_debug_level(const char *val, struct kernel_param *kp);
 module_param_call(mpt_debug_level, mpt_set_debug_level, param_get_int,
 		  &mpt_debug_level, 0600);
-MODULE_PARM_DESC(mpt_debug_level, " debug level - refer to mptdebug.h - (default=0)");
+MODULE_PARM_DESC(mpt_debug_level, " debug level - refer to mptdebug.h \
+	- (default=0)");
+
+int mpt_fwfault_debug;
+EXPORT_SYMBOL(mpt_fwfault_debug);
+module_param_call(mpt_fwfault_debug, param_set_int, param_get_int,
+	  &mpt_fwfault_debug, 0600);
+MODULE_PARM_DESC(mpt_fwfault_debug, "Enable detection of Firmware fault"
+	" and halt Firmware on fault - (default=0)");
+
+
 
 #ifdef MFCNT
 static int mfcounter = 0;
@@ -1751,16 +1774,25 @@
 		ioc->bus_type = SAS;
 	}
 
-	if (mpt_msi_enable == -1) {
-		/* Enable on SAS, disable on FC and SPI */
-		if (ioc->bus_type == SAS)
-			ioc->msi_enable = 1;
-		else
-			ioc->msi_enable = 0;
-	} else
-		/* follow flag: 0 - disable; 1 - enable */
-		ioc->msi_enable = mpt_msi_enable;
 
+	switch (ioc->bus_type) {
+
+	case SAS:
+		ioc->msi_enable = mpt_msi_enable_sas;
+		break;
+
+	case SPI:
+		ioc->msi_enable = mpt_msi_enable_spi;
+		break;
+
+	case FC:
+		ioc->msi_enable = mpt_msi_enable_fc;
+		break;
+
+	default:
+		ioc->msi_enable = 0;
+		break;
+	}
 	if (ioc->errata_flag_1064)
 		pci_disable_io_access(pdev);
 
@@ -6313,6 +6345,33 @@
 	*size = y;
 }
 
+
+/**
+ *	mpt_halt_firmware - Halts the firmware if it is operational and panic
+ *	the kernel
+ *	@ioc: Pointer to MPT_ADAPTER structure
+ *
+ **/
+void
+mpt_halt_firmware(MPT_ADAPTER *ioc)
+{
+	u32	 ioc_raw_state;
+
+	ioc_raw_state = mpt_GetIocState(ioc, 0);
+
+	if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
+		printk(MYIOC_s_ERR_FMT "IOC is in FAULT state (%04xh)!!!\n",
+			ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
+		panic("%s: IOC Fault (%04xh)!!!\n", ioc->name,
+			ioc_raw_state & MPI_DOORBELL_DATA_MASK);
+	} else {
+		CHIPREG_WRITE32(&ioc->chip->Doorbell, 0xC0FFEE00);
+		panic("%s: Firmware is halted due to command timeout\n",
+			ioc->name);
+	}
+}
+EXPORT_SYMBOL(mpt_halt_firmware);
+
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
  *	Reset Handling
@@ -6345,6 +6404,8 @@
 	printk(MYIOC_s_INFO_FMT "HardResetHandler Entered!\n", ioc->name);
 	printk("MF count 0x%x !\n", ioc->mfcnt);
 #endif
+	if (mpt_fwfault_debug)
+		mpt_halt_firmware(ioc);
 
 	/* Reset the adapter. Prevent more than 1 call to
 	 * mpt_do_ioc_recovery at any instant in time.
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index dff048c..b3e981d 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -922,11 +922,14 @@
 extern int	 mpt_findImVolumes(MPT_ADAPTER *ioc);
 extern int	 mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
 extern int	 mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num, pRaidPhysDiskPage0_t phys_disk);
+extern void     mpt_halt_firmware(MPT_ADAPTER *ioc);
+
 
 /*
  *  Public data decl's...
  */
 extern struct list_head	  ioc_list;
+extern int mpt_fwfault_debug;
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 #endif		/* } __KERNEL__ */
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index ee09041..e62c6bc 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -1846,6 +1846,9 @@
 	if (hd->timeouts < -1)
 		hd->timeouts++;
 
+	if (mpt_fwfault_debug)
+		mpt_halt_firmware(ioc);
+
 	/* Most important!  Set TaskMsgContext to SCpnt's MsgContext!
 	 * (the IO to be ABORT'd)
 	 *
diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c
index 074b11f..e7ab003 100644
--- a/drivers/mfd/twl4030-core.c
+++ b/drivers/mfd/twl4030-core.c
@@ -649,7 +649,7 @@
 	return e;
 }
 
-static void __init clocks_init(void)
+static void __init clocks_init(struct device *dev)
 {
 	int e = 0;
 	struct clk *osc;
@@ -658,9 +658,9 @@
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 	if (cpu_is_omap2430())
-		osc = clk_get(NULL, "osc_ck");
+		osc = clk_get(dev, "osc_ck");
 	else
-		osc = clk_get(NULL, "osc_sys_ck");
+		osc = clk_get(dev, "osc_sys_ck");
 
 	if (IS_ERR(osc)) {
 		printk(KERN_WARNING "Skipping twl4030 internal clock init and "
@@ -776,7 +776,7 @@
 	inuse = true;
 
 	/* setup clock framework */
-	clocks_init();
+	clocks_init(&client->dev);
 
 	/* Maybe init the T2 Interrupt subsystem */
 	if (client->irq
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 419c378..5607319 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -87,14 +87,6 @@
 	  If you choose to build module, its name will be phantom. If unsure,
 	  say N here.
 
-config EEPROM_93CX6
-	tristate "EEPROM 93CX6 support"
-	---help---
-	  This is a driver for the EEPROM chipsets 93c46 and 93c66.
-	  The driver supports both read as well as write commands.
-
-	  If unsure, say N.
-
 config SGI_IOC4
 	tristate "SGI IOC4 Base IO support"
 	depends on PCI
@@ -231,5 +223,6 @@
 	laptops.
 
 source "drivers/misc/c2port/Kconfig"
+source "drivers/misc/eeprom/Kconfig"
 
 endif # MISC_DEVICES
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 9cf8ae6..bc11998 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -10,14 +10,13 @@
 obj-$(CONFIG_ICS932S401)	+= ics932s401.o
 obj-$(CONFIG_LKDTM)		+= lkdtm.o
 obj-$(CONFIG_TIFM_CORE)       	+= tifm_core.o
-obj-$(CONFIG_DELL_LAPTOP)	+= dell-laptop.o
 obj-$(CONFIG_TIFM_7XX1)       	+= tifm_7xx1.o
 obj-$(CONFIG_PHANTOM)		+= phantom.o
 obj-$(CONFIG_SGI_IOC4)		+= ioc4.o
-obj-$(CONFIG_EEPROM_93CX6)	+= eeprom_93cx6.o
 obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o
 obj-$(CONFIG_KGDB_TESTS)	+= kgdbts.o
 obj-$(CONFIG_SGI_XP)		+= sgi-xp/
 obj-$(CONFIG_SGI_GRU)		+= sgi-gru/
 obj-$(CONFIG_HP_ILO)		+= hpilo.o
 obj-$(CONFIG_C2PORT)		+= c2port/
+obj-y				+= eeprom/
diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
new file mode 100644
index 0000000..c76df8c
--- /dev/null
+++ b/drivers/misc/eeprom/Kconfig
@@ -0,0 +1,59 @@
+menu "EEPROM support"
+
+config EEPROM_AT24
+	tristate "I2C EEPROMs from most vendors"
+	depends on I2C && SYSFS && EXPERIMENTAL
+	help
+	  Enable this driver to get read/write support to most I2C EEPROMs,
+	  after you configure the driver to know about each EEPROM on
+	  your target board.  Use these generic chip names, instead of
+	  vendor-specific ones like at24c64 or 24lc02:
+
+	     24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08,
+	     24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024
+
+	  Unless you like data loss puzzles, always be sure that any chip
+	  you configure as a 24c32 (32 kbit) or larger is NOT really a
+	  24c16 (16 kbit) or smaller, and vice versa. Marking the chip
+	  as read-only won't help recover from this. Also, if your chip
+	  has any software write-protect mechanism you may want to review the
+	  code to make sure this driver won't turn it on by accident.
+
+	  If you use this with an SMBus adapter instead of an I2C adapter,
+	  full functionality is not available.  Only smaller devices are
+	  supported (24c16 and below, max 4 kByte).
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called at24.
+
+config EEPROM_AT25
+	tristate "SPI EEPROMs from most vendors"
+	depends on SPI && SYSFS
+	help
+	  Enable this driver to get read/write support to most SPI EEPROMs,
+	  after you configure the board init code to know about each eeprom
+	  on your target board.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called at25.
+
+config EEPROM_LEGACY
+	tristate "Old I2C EEPROM reader"
+	depends on I2C && SYSFS
+	help
+	  If you say yes here you get read-only access to the EEPROM data
+	  available on modern memory DIMMs and Sony Vaio laptops via I2C. Such
+	  EEPROMs could theoretically be available on other devices as well.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called eeprom.
+
+config EEPROM_93CX6
+	tristate "EEPROM 93CX6 support"
+	help
+	  This is a driver for the EEPROM chipsets 93c46 and 93c66.
+	  The driver supports both read as well as write commands.
+
+	  If unsure, say N.
+
+endmenu
diff --git a/drivers/misc/eeprom/Makefile b/drivers/misc/eeprom/Makefile
new file mode 100644
index 0000000..539dd8f
--- /dev/null
+++ b/drivers/misc/eeprom/Makefile
@@ -0,0 +1,4 @@
+obj-$(CONFIG_EEPROM_AT24)	+= at24.o
+obj-$(CONFIG_EEPROM_AT25)	+= at25.o
+obj-$(CONFIG_EEPROM_LEGACY)	+= eeprom.o
+obj-$(CONFIG_EEPROM_93CX6)	+= eeprom_93cx6.o
diff --git a/drivers/i2c/chips/at24.c b/drivers/misc/eeprom/at24.c
similarity index 100%
rename from drivers/i2c/chips/at24.c
rename to drivers/misc/eeprom/at24.c
diff --git a/drivers/spi/at25.c b/drivers/misc/eeprom/at25.c
similarity index 100%
rename from drivers/spi/at25.c
rename to drivers/misc/eeprom/at25.c
diff --git a/drivers/i2c/chips/eeprom.c b/drivers/misc/eeprom/eeprom.c
similarity index 100%
rename from drivers/i2c/chips/eeprom.c
rename to drivers/misc/eeprom/eeprom.c
diff --git a/drivers/misc/eeprom_93cx6.c b/drivers/misc/eeprom/eeprom_93cx6.c
similarity index 100%
rename from drivers/misc/eeprom_93cx6.c
rename to drivers/misc/eeprom/eeprom_93cx6.c
diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c
index 73b7fb8..82fb995 100644
--- a/drivers/misc/sgi-xp/xpc_sn2.c
+++ b/drivers/misc/sgi-xp/xpc_sn2.c
@@ -899,7 +899,7 @@
 	dev_dbg(xpc_part, "  remote_vars_pa = 0x%016lx\n",
 		part_sn2->remote_vars_pa);
 
-	part->last_heartbeat = remote_vars->heartbeat;
+	part->last_heartbeat = remote_vars->heartbeat - 1;
 	dev_dbg(xpc_part, "  last_heartbeat = 0x%016lx\n",
 		part->last_heartbeat);
 
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index dfa585f..0efa3909 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -76,6 +76,16 @@
 
 	  If unsure, say N.
 
+config MMC_OMAP_HS
+	tristate "TI OMAP High Speed Multimedia Card Interface support"
+	depends on ARCH_OMAP2430 || ARCH_OMAP3
+	help
+	  This selects the TI OMAP High Speed Multimedia card Interface.
+	  If you have an OMAP2430 or OMAP3 board with a Multimedia Card slot,
+	  say Y or M here.
+
+	  If unsure, say N.
+
 config MMC_WBSD
 	tristate "Winbond W83L51xD SD/MMC Card Interface support"
 	depends on ISA_DMA_API
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index f485328..98cab84 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -15,6 +15,7 @@
 obj-$(CONFIG_MMC_WBSD)		+= wbsd.o
 obj-$(CONFIG_MMC_AU1X)		+= au1xmmc.o
 obj-$(CONFIG_MMC_OMAP)		+= omap.o
+obj-$(CONFIG_MMC_OMAP_HS)	+= omap_hsmmc.o
 obj-$(CONFIG_MMC_AT91)		+= at91_mci.o
 obj-$(CONFIG_MMC_ATMELMCI)	+= atmel-mci.o
 obj-$(CONFIG_MMC_TIFM_SD)	+= tifm_sd.o
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
new file mode 100644
index 0000000..db37490
--- /dev/null
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -0,0 +1,1242 @@
+/*
+ * drivers/mmc/host/omap_hsmmc.c
+ *
+ * Driver for OMAP2430/3430 MMC controller.
+ *
+ * Copyright (C) 2007 Texas Instruments.
+ *
+ * Authors:
+ *	Syed Mohammed Khasim	<x0khasim@ti.com>
+ *	Madhusudhan		<madhu.cr@ti.com>
+ *	Mohit Jalori		<mjalori@ti.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <linux/timer.h>
+#include <linux/clk.h>
+#include <linux/mmc/host.h>
+#include <linux/io.h>
+#include <linux/semaphore.h>
+#include <mach/dma.h>
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/mmc.h>
+#include <mach/cpu.h>
+
+/* OMAP HSMMC Host Controller Registers */
+#define OMAP_HSMMC_SYSCONFIG	0x0010
+#define OMAP_HSMMC_CON		0x002C
+#define OMAP_HSMMC_BLK		0x0104
+#define OMAP_HSMMC_ARG		0x0108
+#define OMAP_HSMMC_CMD		0x010C
+#define OMAP_HSMMC_RSP10	0x0110
+#define OMAP_HSMMC_RSP32	0x0114
+#define OMAP_HSMMC_RSP54	0x0118
+#define OMAP_HSMMC_RSP76	0x011C
+#define OMAP_HSMMC_DATA		0x0120
+#define OMAP_HSMMC_HCTL		0x0128
+#define OMAP_HSMMC_SYSCTL	0x012C
+#define OMAP_HSMMC_STAT		0x0130
+#define OMAP_HSMMC_IE		0x0134
+#define OMAP_HSMMC_ISE		0x0138
+#define OMAP_HSMMC_CAPA		0x0140
+
+#define VS18			(1 << 26)
+#define VS30			(1 << 25)
+#define SDVS18			(0x5 << 9)
+#define SDVS30			(0x6 << 9)
+#define SDVSCLR			0xFFFFF1FF
+#define SDVSDET			0x00000400
+#define AUTOIDLE		0x1
+#define SDBP			(1 << 8)
+#define DTO			0xe
+#define ICE			0x1
+#define ICS			0x2
+#define CEN			(1 << 2)
+#define CLKD_MASK		0x0000FFC0
+#define CLKD_SHIFT		6
+#define DTO_MASK		0x000F0000
+#define DTO_SHIFT		16
+#define INT_EN_MASK		0x307F0033
+#define INIT_STREAM		(1 << 1)
+#define DP_SELECT		(1 << 21)
+#define DDIR			(1 << 4)
+#define DMA_EN			0x1
+#define MSBS			(1 << 5)
+#define BCE			(1 << 1)
+#define FOUR_BIT		(1 << 1)
+#define CC			0x1
+#define TC			0x02
+#define OD			0x1
+#define ERR			(1 << 15)
+#define CMD_TIMEOUT		(1 << 16)
+#define DATA_TIMEOUT		(1 << 20)
+#define CMD_CRC			(1 << 17)
+#define DATA_CRC		(1 << 21)
+#define CARD_ERR		(1 << 28)
+#define STAT_CLEAR		0xFFFFFFFF
+#define INIT_STREAM_CMD		0x00000000
+#define DUAL_VOLT_OCR_BIT	7
+#define SRC			(1 << 25)
+#define SRD			(1 << 26)
+
+/*
+ * FIXME: Most likely all the data using these _DEVID defines should come
+ * from the platform_data, or implemented in controller and slot specific
+ * functions.
+ */
+#define OMAP_MMC1_DEVID		0
+#define OMAP_MMC2_DEVID		1
+
+#define OMAP_MMC_DATADIR_NONE	0
+#define OMAP_MMC_DATADIR_READ	1
+#define OMAP_MMC_DATADIR_WRITE	2
+#define MMC_TIMEOUT_MS		20
+#define OMAP_MMC_MASTER_CLOCK	96000000
+#define DRIVER_NAME		"mmci-omap-hs"
+
+/*
+ * One controller can have multiple slots, like on some omap boards using
+ * omap.c controller driver. Luckily this is not currently done on any known
+ * omap_hsmmc.c device.
+ */
+#define mmc_slot(host)		(host->pdata->slots[host->slot_id])
+
+/*
+ * MMC Host controller read/write API's
+ */
+#define OMAP_HSMMC_READ(base, reg)	\
+	__raw_readl((base) + OMAP_HSMMC_##reg)
+
+#define OMAP_HSMMC_WRITE(base, reg, val) \
+	__raw_writel((val), (base) + OMAP_HSMMC_##reg)
+
+struct mmc_omap_host {
+	struct	device		*dev;
+	struct	mmc_host	*mmc;
+	struct	mmc_request	*mrq;
+	struct	mmc_command	*cmd;
+	struct	mmc_data	*data;
+	struct	clk		*fclk;
+	struct	clk		*iclk;
+	struct	clk		*dbclk;
+	struct	semaphore	sem;
+	struct	work_struct	mmc_carddetect_work;
+	void	__iomem		*base;
+	resource_size_t		mapbase;
+	unsigned int		id;
+	unsigned int		dma_len;
+	unsigned int		dma_dir;
+	unsigned char		bus_mode;
+	unsigned char		datadir;
+	u32			*buffer;
+	u32			bytesleft;
+	int			suspended;
+	int			irq;
+	int			carddetect;
+	int			use_dma, dma_ch;
+	int			initstr;
+	int			slot_id;
+	int			dbclk_enabled;
+	struct	omap_mmc_platform_data	*pdata;
+};
+
+/*
+ * Stop clock to the card
+ */
+static void omap_mmc_stop_clock(struct mmc_omap_host *host)
+{
+	OMAP_HSMMC_WRITE(host->base, SYSCTL,
+		OMAP_HSMMC_READ(host->base, SYSCTL) & ~CEN);
+	if ((OMAP_HSMMC_READ(host->base, SYSCTL) & CEN) != 0x0)
+		dev_dbg(mmc_dev(host->mmc), "MMC Clock is not stoped\n");
+}
+
+/*
+ * Send init stream sequence to card
+ * before sending IDLE command
+ */
+static void send_init_stream(struct mmc_omap_host *host)
+{
+	int reg = 0;
+	unsigned long timeout;
+
+	disable_irq(host->irq);
+	OMAP_HSMMC_WRITE(host->base, CON,
+		OMAP_HSMMC_READ(host->base, CON) | INIT_STREAM);
+	OMAP_HSMMC_WRITE(host->base, CMD, INIT_STREAM_CMD);
+
+	timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS);
+	while ((reg != CC) && time_before(jiffies, timeout))
+		reg = OMAP_HSMMC_READ(host->base, STAT) & CC;
+
+	OMAP_HSMMC_WRITE(host->base, CON,
+		OMAP_HSMMC_READ(host->base, CON) & ~INIT_STREAM);
+	enable_irq(host->irq);
+}
+
+static inline
+int mmc_omap_cover_is_closed(struct mmc_omap_host *host)
+{
+	int r = 1;
+
+	if (host->pdata->slots[host->slot_id].get_cover_state)
+		r = host->pdata->slots[host->slot_id].get_cover_state(host->dev,
+			host->slot_id);
+	return r;
+}
+
+static ssize_t
+mmc_omap_show_cover_switch(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev);
+	struct mmc_omap_host *host = mmc_priv(mmc);
+
+	return sprintf(buf, "%s\n", mmc_omap_cover_is_closed(host) ? "closed" :
+		       "open");
+}
+
+static DEVICE_ATTR(cover_switch, S_IRUGO, mmc_omap_show_cover_switch, NULL);
+
+static ssize_t
+mmc_omap_show_slot_name(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev);
+	struct mmc_omap_host *host = mmc_priv(mmc);
+	struct omap_mmc_slot_data slot = host->pdata->slots[host->slot_id];
+
+	return sprintf(buf, "slot:%s\n", slot.name);
+}
+
+static DEVICE_ATTR(slot_name, S_IRUGO, mmc_omap_show_slot_name, NULL);
+
+/*
+ * Configure the response type and send the cmd.
+ */
+static void
+mmc_omap_start_command(struct mmc_omap_host *host, struct mmc_command *cmd,
+	struct mmc_data *data)
+{
+	int cmdreg = 0, resptype = 0, cmdtype = 0;
+
+	dev_dbg(mmc_dev(host->mmc), "%s: CMD%d, argument 0x%08x\n",
+		mmc_hostname(host->mmc), cmd->opcode, cmd->arg);
+	host->cmd = cmd;
+
+	/*
+	 * Clear status bits and enable interrupts
+	 */
+	OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
+	OMAP_HSMMC_WRITE(host->base, ISE, INT_EN_MASK);
+	OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK);
+
+	if (cmd->flags & MMC_RSP_PRESENT) {
+		if (cmd->flags & MMC_RSP_136)
+			resptype = 1;
+		else
+			resptype = 2;
+	}
+
+	/*
+	 * Unlike OMAP1 controller, the cmdtype does not seem to be based on
+	 * ac, bc, adtc, bcr. Only commands ending an open ended transfer need
+	 * a val of 0x3, rest 0x0.
+	 */
+	if (cmd == host->mrq->stop)
+		cmdtype = 0x3;
+
+	cmdreg = (cmd->opcode << 24) | (resptype << 16) | (cmdtype << 22);
+
+	if (data) {
+		cmdreg |= DP_SELECT | MSBS | BCE;
+		if (data->flags & MMC_DATA_READ)
+			cmdreg |= DDIR;
+		else
+			cmdreg &= ~(DDIR);
+	}
+
+	if (host->use_dma)
+		cmdreg |= DMA_EN;
+
+	OMAP_HSMMC_WRITE(host->base, ARG, cmd->arg);
+	OMAP_HSMMC_WRITE(host->base, CMD, cmdreg);
+}
+
+/*
+ * Notify the transfer complete to MMC core
+ */
+static void
+mmc_omap_xfer_done(struct mmc_omap_host *host, struct mmc_data *data)
+{
+	host->data = NULL;
+
+	if (host->use_dma && host->dma_ch != -1)
+		dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_len,
+			host->dma_dir);
+
+	host->datadir = OMAP_MMC_DATADIR_NONE;
+
+	if (!data->error)
+		data->bytes_xfered += data->blocks * (data->blksz);
+	else
+		data->bytes_xfered = 0;
+
+	if (!data->stop) {
+		host->mrq = NULL;
+		mmc_request_done(host->mmc, data->mrq);
+		return;
+	}
+	mmc_omap_start_command(host, data->stop, NULL);
+}
+
+/*
+ * Notify the core about command completion
+ */
+static void
+mmc_omap_cmd_done(struct mmc_omap_host *host, struct mmc_command *cmd)
+{
+	host->cmd = NULL;
+
+	if (cmd->flags & MMC_RSP_PRESENT) {
+		if (cmd->flags & MMC_RSP_136) {
+			/* response type 2 */
+			cmd->resp[3] = OMAP_HSMMC_READ(host->base, RSP10);
+			cmd->resp[2] = OMAP_HSMMC_READ(host->base, RSP32);
+			cmd->resp[1] = OMAP_HSMMC_READ(host->base, RSP54);
+			cmd->resp[0] = OMAP_HSMMC_READ(host->base, RSP76);
+		} else {
+			/* response types 1, 1b, 3, 4, 5, 6 */
+			cmd->resp[0] = OMAP_HSMMC_READ(host->base, RSP10);
+		}
+	}
+	if (host->data == NULL || cmd->error) {
+		host->mrq = NULL;
+		mmc_request_done(host->mmc, cmd->mrq);
+	}
+}
+
+/*
+ * DMA clean up for command errors
+ */
+static void mmc_dma_cleanup(struct mmc_omap_host *host)
+{
+	host->data->error = -ETIMEDOUT;
+
+	if (host->use_dma && host->dma_ch != -1) {
+		dma_unmap_sg(mmc_dev(host->mmc), host->data->sg, host->dma_len,
+			host->dma_dir);
+		omap_free_dma(host->dma_ch);
+		host->dma_ch = -1;
+		up(&host->sem);
+	}
+	host->data = NULL;
+	host->datadir = OMAP_MMC_DATADIR_NONE;
+}
+
+/*
+ * Readable error output
+ */
+#ifdef CONFIG_MMC_DEBUG
+static void mmc_omap_report_irq(struct mmc_omap_host *host, u32 status)
+{
+	/* --- means reserved bit without definition at documentation */
+	static const char *mmc_omap_status_bits[] = {
+		"CC", "TC", "BGE", "---", "BWR", "BRR", "---", "---", "CIRQ",
+		"OBI", "---", "---", "---", "---", "---", "ERRI", "CTO", "CCRC",
+		"CEB", "CIE", "DTO", "DCRC", "DEB", "---", "ACE", "---",
+		"---", "---", "---", "CERR", "CERR", "BADA", "---", "---", "---"
+	};
+	char res[256];
+	char *buf = res;
+	int len, i;
+
+	len = sprintf(buf, "MMC IRQ 0x%x :", status);
+	buf += len;
+
+	for (i = 0; i < ARRAY_SIZE(mmc_omap_status_bits); i++)
+		if (status & (1 << i)) {
+			len = sprintf(buf, " %s", mmc_omap_status_bits[i]);
+			buf += len;
+		}
+
+	dev_dbg(mmc_dev(host->mmc), "%s\n", res);
+}
+#endif  /* CONFIG_MMC_DEBUG */
+
+
+/*
+ * MMC controller IRQ handler
+ */
+static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
+{
+	struct mmc_omap_host *host = dev_id;
+	struct mmc_data *data;
+	int end_cmd = 0, end_trans = 0, status;
+
+	if (host->cmd == NULL && host->data == NULL) {
+		OMAP_HSMMC_WRITE(host->base, STAT,
+			OMAP_HSMMC_READ(host->base, STAT));
+		return IRQ_HANDLED;
+	}
+
+	data = host->data;
+	status = OMAP_HSMMC_READ(host->base, STAT);
+	dev_dbg(mmc_dev(host->mmc), "IRQ Status is %x\n", status);
+
+	if (status & ERR) {
+#ifdef CONFIG_MMC_DEBUG
+		mmc_omap_report_irq(host, status);
+#endif
+		if ((status & CMD_TIMEOUT) ||
+			(status & CMD_CRC)) {
+			if (host->cmd) {
+				if (status & CMD_TIMEOUT) {
+					OMAP_HSMMC_WRITE(host->base, SYSCTL,
+						OMAP_HSMMC_READ(host->base,
+								SYSCTL) | SRC);
+					while (OMAP_HSMMC_READ(host->base,
+							SYSCTL) & SRC)
+						;
+
+					host->cmd->error = -ETIMEDOUT;
+				} else {
+					host->cmd->error = -EILSEQ;
+				}
+				end_cmd = 1;
+			}
+			if (host->data)
+				mmc_dma_cleanup(host);
+		}
+		if ((status & DATA_TIMEOUT) ||
+			(status & DATA_CRC)) {
+			if (host->data) {
+				if (status & DATA_TIMEOUT)
+					mmc_dma_cleanup(host);
+				else
+					host->data->error = -EILSEQ;
+				OMAP_HSMMC_WRITE(host->base, SYSCTL,
+					OMAP_HSMMC_READ(host->base,
+							SYSCTL) | SRD);
+				while (OMAP_HSMMC_READ(host->base,
+						SYSCTL) & SRD)
+					;
+				end_trans = 1;
+			}
+		}
+		if (status & CARD_ERR) {
+			dev_dbg(mmc_dev(host->mmc),
+				"Ignoring card err CMD%d\n", host->cmd->opcode);
+			if (host->cmd)
+				end_cmd = 1;
+			if (host->data)
+				end_trans = 1;
+		}
+	}
+
+	OMAP_HSMMC_WRITE(host->base, STAT, status);
+
+	if (end_cmd || (status & CC))
+		mmc_omap_cmd_done(host, host->cmd);
+	if (end_trans || (status & TC))
+		mmc_omap_xfer_done(host, data);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Switch MMC operating voltage
+ */
+static int omap_mmc_switch_opcond(struct mmc_omap_host *host, int vdd)
+{
+	u32 reg_val = 0;
+	int ret;
+
+	/* Disable the clocks */
+	clk_disable(host->fclk);
+	clk_disable(host->iclk);
+	clk_disable(host->dbclk);
+
+	/* Turn the power off */
+	ret = mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
+	if (ret != 0)
+		goto err;
+
+	/* Turn the power ON with given VDD 1.8 or 3.0v */
+	ret = mmc_slot(host).set_power(host->dev, host->slot_id, 1, vdd);
+	if (ret != 0)
+		goto err;
+
+	clk_enable(host->fclk);
+	clk_enable(host->iclk);
+	clk_enable(host->dbclk);
+
+	OMAP_HSMMC_WRITE(host->base, HCTL,
+		OMAP_HSMMC_READ(host->base, HCTL) & SDVSCLR);
+	reg_val = OMAP_HSMMC_READ(host->base, HCTL);
+	/*
+	 * If a MMC dual voltage card is detected, the set_ios fn calls
+	 * this fn with VDD bit set for 1.8V. Upon card removal from the
+	 * slot, omap_mmc_set_ios sets the VDD back to 3V on MMC_POWER_OFF.
+	 *
+	 * Only MMC1 supports 3.0V.  MMC2 will not function if SDVS30 is
+	 * set in HCTL.
+	 */
+	if (host->id == OMAP_MMC1_DEVID && (((1 << vdd) == MMC_VDD_32_33) ||
+				((1 << vdd) == MMC_VDD_33_34)))
+		reg_val |= SDVS30;
+	if ((1 << vdd) == MMC_VDD_165_195)
+		reg_val |= SDVS18;
+
+	OMAP_HSMMC_WRITE(host->base, HCTL, reg_val);
+
+	OMAP_HSMMC_WRITE(host->base, HCTL,
+		OMAP_HSMMC_READ(host->base, HCTL) | SDBP);
+
+	return 0;
+err:
+	dev_dbg(mmc_dev(host->mmc), "Unable to switch operating voltage\n");
+	return ret;
+}
+
+/*
+ * Work Item to notify the core about card insertion/removal
+ */
+static void mmc_omap_detect(struct work_struct *work)
+{
+	struct mmc_omap_host *host = container_of(work, struct mmc_omap_host,
+						mmc_carddetect_work);
+
+	sysfs_notify(&host->mmc->class_dev.kobj, NULL, "cover_switch");
+	if (host->carddetect) {
+		mmc_detect_change(host->mmc, (HZ * 200) / 1000);
+	} else {
+		OMAP_HSMMC_WRITE(host->base, SYSCTL,
+			OMAP_HSMMC_READ(host->base, SYSCTL) | SRD);
+		while (OMAP_HSMMC_READ(host->base, SYSCTL) & SRD)
+			;
+
+		mmc_detect_change(host->mmc, (HZ * 50) / 1000);
+	}
+}
+
+/*
+ * ISR for handling card insertion and removal
+ */
+static irqreturn_t omap_mmc_cd_handler(int irq, void *dev_id)
+{
+	struct mmc_omap_host *host = (struct mmc_omap_host *)dev_id;
+
+	host->carddetect = mmc_slot(host).card_detect(irq);
+	schedule_work(&host->mmc_carddetect_work);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * DMA call back function
+ */
+static void mmc_omap_dma_cb(int lch, u16 ch_status, void *data)
+{
+	struct mmc_omap_host *host = data;
+
+	if (ch_status & OMAP2_DMA_MISALIGNED_ERR_IRQ)
+		dev_dbg(mmc_dev(host->mmc), "MISALIGNED_ADRS_ERR\n");
+
+	if (host->dma_ch < 0)
+		return;
+
+	omap_free_dma(host->dma_ch);
+	host->dma_ch = -1;
+	/*
+	 * DMA Callback: run in interrupt context.
+	 * mutex_unlock will through a kernel warning if used.
+	 */
+	up(&host->sem);
+}
+
+/*
+ * Configure dma src and destination parameters
+ */
+static int mmc_omap_config_dma_param(int sync_dir, struct mmc_omap_host *host,
+				struct mmc_data *data)
+{
+	if (sync_dir == 0) {
+		omap_set_dma_dest_params(host->dma_ch, 0,
+			OMAP_DMA_AMODE_CONSTANT,
+			(host->mapbase + OMAP_HSMMC_DATA), 0, 0);
+		omap_set_dma_src_params(host->dma_ch, 0,
+			OMAP_DMA_AMODE_POST_INC,
+			sg_dma_address(&data->sg[0]), 0, 0);
+	} else {
+		omap_set_dma_src_params(host->dma_ch, 0,
+			OMAP_DMA_AMODE_CONSTANT,
+			(host->mapbase + OMAP_HSMMC_DATA), 0, 0);
+		omap_set_dma_dest_params(host->dma_ch, 0,
+			OMAP_DMA_AMODE_POST_INC,
+			sg_dma_address(&data->sg[0]), 0, 0);
+	}
+	return 0;
+}
+/*
+ * Routine to configure and start DMA for the MMC card
+ */
+static int
+mmc_omap_start_dma_transfer(struct mmc_omap_host *host, struct mmc_request *req)
+{
+	int sync_dev, sync_dir = 0;
+	int dma_ch = 0, ret = 0, err = 1;
+	struct mmc_data *data = req->data;
+
+	/*
+	 * If for some reason the DMA transfer is still active,
+	 * we wait for timeout period and free the dma
+	 */
+	if (host->dma_ch != -1) {
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		schedule_timeout(100);
+		if (down_trylock(&host->sem)) {
+			omap_free_dma(host->dma_ch);
+			host->dma_ch = -1;
+			up(&host->sem);
+			return err;
+		}
+	} else {
+		if (down_trylock(&host->sem))
+			return err;
+	}
+
+	if (!(data->flags & MMC_DATA_WRITE)) {
+		host->dma_dir = DMA_FROM_DEVICE;
+		if (host->id == OMAP_MMC1_DEVID)
+			sync_dev = OMAP24XX_DMA_MMC1_RX;
+		else
+			sync_dev = OMAP24XX_DMA_MMC2_RX;
+	} else {
+		host->dma_dir = DMA_TO_DEVICE;
+		if (host->id == OMAP_MMC1_DEVID)
+			sync_dev = OMAP24XX_DMA_MMC1_TX;
+		else
+			sync_dev = OMAP24XX_DMA_MMC2_TX;
+	}
+
+	ret = omap_request_dma(sync_dev, "MMC/SD", mmc_omap_dma_cb,
+			host, &dma_ch);
+	if (ret != 0) {
+		dev_dbg(mmc_dev(host->mmc),
+			"%s: omap_request_dma() failed with %d\n",
+			mmc_hostname(host->mmc), ret);
+		return ret;
+	}
+
+	host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg,
+			data->sg_len, host->dma_dir);
+	host->dma_ch = dma_ch;
+
+	if (!(data->flags & MMC_DATA_WRITE))
+		mmc_omap_config_dma_param(1, host, data);
+	else
+		mmc_omap_config_dma_param(0, host, data);
+
+	if ((data->blksz % 4) == 0)
+		omap_set_dma_transfer_params(dma_ch, OMAP_DMA_DATA_TYPE_S32,
+			(data->blksz / 4), data->blocks, OMAP_DMA_SYNC_FRAME,
+			sync_dev, sync_dir);
+	else
+		/* REVISIT: The MMC buffer increments only when MSB is written.
+		 * Return error for blksz which is non multiple of four.
+		 */
+		return -EINVAL;
+
+	omap_start_dma(dma_ch);
+	return 0;
+}
+
+static void set_data_timeout(struct mmc_omap_host *host,
+			     struct mmc_request *req)
+{
+	unsigned int timeout, cycle_ns;
+	uint32_t reg, clkd, dto = 0;
+
+	reg = OMAP_HSMMC_READ(host->base, SYSCTL);
+	clkd = (reg & CLKD_MASK) >> CLKD_SHIFT;
+	if (clkd == 0)
+		clkd = 1;
+
+	cycle_ns = 1000000000 / (clk_get_rate(host->fclk) / clkd);
+	timeout = req->data->timeout_ns / cycle_ns;
+	timeout += req->data->timeout_clks;
+	if (timeout) {
+		while ((timeout & 0x80000000) == 0) {
+			dto += 1;
+			timeout <<= 1;
+		}
+		dto = 31 - dto;
+		timeout <<= 1;
+		if (timeout && dto)
+			dto += 1;
+		if (dto >= 13)
+			dto -= 13;
+		else
+			dto = 0;
+		if (dto > 14)
+			dto = 14;
+	}
+
+	reg &= ~DTO_MASK;
+	reg |= dto << DTO_SHIFT;
+	OMAP_HSMMC_WRITE(host->base, SYSCTL, reg);
+}
+
+/*
+ * Configure block length for MMC/SD cards and initiate the transfer.
+ */
+static int
+mmc_omap_prepare_data(struct mmc_omap_host *host, struct mmc_request *req)
+{
+	int ret;
+	host->data = req->data;
+
+	if (req->data == NULL) {
+		host->datadir = OMAP_MMC_DATADIR_NONE;
+		OMAP_HSMMC_WRITE(host->base, BLK, 0);
+		return 0;
+	}
+
+	OMAP_HSMMC_WRITE(host->base, BLK, (req->data->blksz)
+					| (req->data->blocks << 16));
+	set_data_timeout(host, req);
+
+	host->datadir = (req->data->flags & MMC_DATA_WRITE) ?
+			OMAP_MMC_DATADIR_WRITE : OMAP_MMC_DATADIR_READ;
+
+	if (host->use_dma) {
+		ret = mmc_omap_start_dma_transfer(host, req);
+		if (ret != 0) {
+			dev_dbg(mmc_dev(host->mmc), "MMC start dma failure\n");
+			return ret;
+		}
+	}
+	return 0;
+}
+
+/*
+ * Request function. for read/write operation
+ */
+static void omap_mmc_request(struct mmc_host *mmc, struct mmc_request *req)
+{
+	struct mmc_omap_host *host = mmc_priv(mmc);
+
+	WARN_ON(host->mrq != NULL);
+	host->mrq = req;
+	mmc_omap_prepare_data(host, req);
+	mmc_omap_start_command(host, req->cmd, req->data);
+}
+
+
+/* Routine to configure clock values. Exposed API to core */
+static void omap_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct mmc_omap_host *host = mmc_priv(mmc);
+	u16 dsor = 0;
+	unsigned long regval;
+	unsigned long timeout;
+
+	switch (ios->power_mode) {
+	case MMC_POWER_OFF:
+		mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
+		/*
+		 * Reset bus voltage to 3V if it got set to 1.8V earlier.
+		 * REVISIT: If we are able to detect cards after unplugging
+		 * a 1.8V card, this code should not be needed.
+		 */
+		if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
+			int vdd = fls(host->mmc->ocr_avail) - 1;
+			if (omap_mmc_switch_opcond(host, vdd) != 0)
+				host->mmc->ios.vdd = vdd;
+		}
+		break;
+	case MMC_POWER_UP:
+		mmc_slot(host).set_power(host->dev, host->slot_id, 1, ios->vdd);
+		break;
+	}
+
+	switch (mmc->ios.bus_width) {
+	case MMC_BUS_WIDTH_4:
+		OMAP_HSMMC_WRITE(host->base, HCTL,
+			OMAP_HSMMC_READ(host->base, HCTL) | FOUR_BIT);
+		break;
+	case MMC_BUS_WIDTH_1:
+		OMAP_HSMMC_WRITE(host->base, HCTL,
+			OMAP_HSMMC_READ(host->base, HCTL) & ~FOUR_BIT);
+		break;
+	}
+
+	if (host->id == OMAP_MMC1_DEVID) {
+		/* Only MMC1 can operate at 3V/1.8V */
+		if ((OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET) &&
+			(ios->vdd == DUAL_VOLT_OCR_BIT)) {
+				/*
+				 * The mmc_select_voltage fn of the core does
+				 * not seem to set the power_mode to
+				 * MMC_POWER_UP upon recalculating the voltage.
+				 * vdd 1.8v.
+				 */
+				if (omap_mmc_switch_opcond(host, ios->vdd) != 0)
+					dev_dbg(mmc_dev(host->mmc),
+						"Switch operation failed\n");
+		}
+	}
+
+	if (ios->clock) {
+		dsor = OMAP_MMC_MASTER_CLOCK / ios->clock;
+		if (dsor < 1)
+			dsor = 1;
+
+		if (OMAP_MMC_MASTER_CLOCK / dsor > ios->clock)
+			dsor++;
+
+		if (dsor > 250)
+			dsor = 250;
+	}
+	omap_mmc_stop_clock(host);
+	regval = OMAP_HSMMC_READ(host->base, SYSCTL);
+	regval = regval & ~(CLKD_MASK);
+	regval = regval | (dsor << 6) | (DTO << 16);
+	OMAP_HSMMC_WRITE(host->base, SYSCTL, regval);
+	OMAP_HSMMC_WRITE(host->base, SYSCTL,
+		OMAP_HSMMC_READ(host->base, SYSCTL) | ICE);
+
+	/* Wait till the ICS bit is set */
+	timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS);
+	while ((OMAP_HSMMC_READ(host->base, SYSCTL) & ICS) != 0x2
+		&& time_before(jiffies, timeout))
+		msleep(1);
+
+	OMAP_HSMMC_WRITE(host->base, SYSCTL,
+		OMAP_HSMMC_READ(host->base, SYSCTL) | CEN);
+
+	if (ios->power_mode == MMC_POWER_ON)
+		send_init_stream(host);
+
+	if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)
+		OMAP_HSMMC_WRITE(host->base, CON,
+				OMAP_HSMMC_READ(host->base, CON) | OD);
+}
+
+static int omap_hsmmc_get_cd(struct mmc_host *mmc)
+{
+	struct mmc_omap_host *host = mmc_priv(mmc);
+	struct omap_mmc_platform_data *pdata = host->pdata;
+
+	if (!pdata->slots[0].card_detect)
+		return -ENOSYS;
+	return pdata->slots[0].card_detect(pdata->slots[0].card_detect_irq);
+}
+
+static int omap_hsmmc_get_ro(struct mmc_host *mmc)
+{
+	struct mmc_omap_host *host = mmc_priv(mmc);
+	struct omap_mmc_platform_data *pdata = host->pdata;
+
+	if (!pdata->slots[0].get_ro)
+		return -ENOSYS;
+	return pdata->slots[0].get_ro(host->dev, 0);
+}
+
+static struct mmc_host_ops mmc_omap_ops = {
+	.request = omap_mmc_request,
+	.set_ios = omap_mmc_set_ios,
+	.get_cd = omap_hsmmc_get_cd,
+	.get_ro = omap_hsmmc_get_ro,
+	/* NYET -- enable_sdio_irq */
+};
+
+static int __init omap_mmc_probe(struct platform_device *pdev)
+{
+	struct omap_mmc_platform_data *pdata = pdev->dev.platform_data;
+	struct mmc_host *mmc;
+	struct mmc_omap_host *host = NULL;
+	struct resource *res;
+	int ret = 0, irq;
+	u32 hctl, capa;
+
+	if (pdata == NULL) {
+		dev_err(&pdev->dev, "Platform Data is missing\n");
+		return -ENXIO;
+	}
+
+	if (pdata->nr_slots == 0) {
+		dev_err(&pdev->dev, "No Slots\n");
+		return -ENXIO;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	irq = platform_get_irq(pdev, 0);
+	if (res == NULL || irq < 0)
+		return -ENXIO;
+
+	res = request_mem_region(res->start, res->end - res->start + 1,
+							pdev->name);
+	if (res == NULL)
+		return -EBUSY;
+
+	mmc = mmc_alloc_host(sizeof(struct mmc_omap_host), &pdev->dev);
+	if (!mmc) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	host		= mmc_priv(mmc);
+	host->mmc	= mmc;
+	host->pdata	= pdata;
+	host->dev	= &pdev->dev;
+	host->use_dma	= 1;
+	host->dev->dma_mask = &pdata->dma_mask;
+	host->dma_ch	= -1;
+	host->irq	= irq;
+	host->id	= pdev->id;
+	host->slot_id	= 0;
+	host->mapbase	= res->start;
+	host->base	= ioremap(host->mapbase, SZ_4K);
+
+	platform_set_drvdata(pdev, host);
+	INIT_WORK(&host->mmc_carddetect_work, mmc_omap_detect);
+
+	mmc->ops	= &mmc_omap_ops;
+	mmc->f_min	= 400000;
+	mmc->f_max	= 52000000;
+
+	sema_init(&host->sem, 1);
+
+	host->iclk = clk_get(&pdev->dev, "mmchs_ick");
+	if (IS_ERR(host->iclk)) {
+		ret = PTR_ERR(host->iclk);
+		host->iclk = NULL;
+		goto err1;
+	}
+	host->fclk = clk_get(&pdev->dev, "mmchs_fck");
+	if (IS_ERR(host->fclk)) {
+		ret = PTR_ERR(host->fclk);
+		host->fclk = NULL;
+		clk_put(host->iclk);
+		goto err1;
+	}
+
+	if (clk_enable(host->fclk) != 0) {
+		clk_put(host->iclk);
+		clk_put(host->fclk);
+		goto err1;
+	}
+
+	if (clk_enable(host->iclk) != 0) {
+		clk_disable(host->fclk);
+		clk_put(host->iclk);
+		clk_put(host->fclk);
+		goto err1;
+	}
+
+	host->dbclk = clk_get(&pdev->dev, "mmchsdb_fck");
+	/*
+	 * MMC can still work without debounce clock.
+	 */
+	if (IS_ERR(host->dbclk))
+		dev_warn(mmc_dev(host->mmc), "Failed to get debounce clock\n");
+	else
+		if (clk_enable(host->dbclk) != 0)
+			dev_dbg(mmc_dev(host->mmc), "Enabling debounce"
+							" clk failed\n");
+		else
+			host->dbclk_enabled = 1;
+
+#ifdef CONFIG_MMC_BLOCK_BOUNCE
+	mmc->max_phys_segs = 1;
+	mmc->max_hw_segs = 1;
+#endif
+	mmc->max_blk_size = 512;       /* Block Length at max can be 1024 */
+	mmc->max_blk_count = 0xFFFF;    /* No. of Blocks is 16 bits */
+	mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
+	mmc->max_seg_size = mmc->max_req_size;
+
+	mmc->ocr_avail = mmc_slot(host).ocr_mask;
+	mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED;
+
+	if (pdata->slots[host->slot_id].wires >= 4)
+		mmc->caps |= MMC_CAP_4_BIT_DATA;
+
+	/* Only MMC1 supports 3.0V */
+	if (host->id == OMAP_MMC1_DEVID) {
+		hctl = SDVS30;
+		capa = VS30 | VS18;
+	} else {
+		hctl = SDVS18;
+		capa = VS18;
+	}
+
+	OMAP_HSMMC_WRITE(host->base, HCTL,
+			OMAP_HSMMC_READ(host->base, HCTL) | hctl);
+
+	OMAP_HSMMC_WRITE(host->base, CAPA,
+			OMAP_HSMMC_READ(host->base, CAPA) | capa);
+
+	/* Set the controller to AUTO IDLE mode */
+	OMAP_HSMMC_WRITE(host->base, SYSCONFIG,
+			OMAP_HSMMC_READ(host->base, SYSCONFIG) | AUTOIDLE);
+
+	/* Set SD bus power bit */
+	OMAP_HSMMC_WRITE(host->base, HCTL,
+			OMAP_HSMMC_READ(host->base, HCTL) | SDBP);
+
+	/* Request IRQ for MMC operations */
+	ret = request_irq(host->irq, mmc_omap_irq, IRQF_DISABLED,
+			mmc_hostname(mmc), host);
+	if (ret) {
+		dev_dbg(mmc_dev(host->mmc), "Unable to grab HSMMC IRQ\n");
+		goto err_irq;
+	}
+
+	if (pdata->init != NULL) {
+		if (pdata->init(&pdev->dev) != 0) {
+			dev_dbg(mmc_dev(host->mmc),
+				"Unable to configure MMC IRQs\n");
+			goto err_irq_cd_init;
+		}
+	}
+
+	/* Request IRQ for card detect */
+	if ((mmc_slot(host).card_detect_irq) && (mmc_slot(host).card_detect)) {
+		ret = request_irq(mmc_slot(host).card_detect_irq,
+				  omap_mmc_cd_handler,
+				  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING
+					  | IRQF_DISABLED,
+				  mmc_hostname(mmc), host);
+		if (ret) {
+			dev_dbg(mmc_dev(host->mmc),
+				"Unable to grab MMC CD IRQ\n");
+			goto err_irq_cd;
+		}
+	}
+
+	OMAP_HSMMC_WRITE(host->base, ISE, INT_EN_MASK);
+	OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK);
+
+	mmc_add_host(mmc);
+
+	if (host->pdata->slots[host->slot_id].name != NULL) {
+		ret = device_create_file(&mmc->class_dev, &dev_attr_slot_name);
+		if (ret < 0)
+			goto err_slot_name;
+	}
+	if (mmc_slot(host).card_detect_irq && mmc_slot(host).card_detect &&
+			host->pdata->slots[host->slot_id].get_cover_state) {
+		ret = device_create_file(&mmc->class_dev,
+					&dev_attr_cover_switch);
+		if (ret < 0)
+			goto err_cover_switch;
+	}
+
+	return 0;
+
+err_cover_switch:
+	device_remove_file(&mmc->class_dev, &dev_attr_cover_switch);
+err_slot_name:
+	mmc_remove_host(mmc);
+err_irq_cd:
+	free_irq(mmc_slot(host).card_detect_irq, host);
+err_irq_cd_init:
+	free_irq(host->irq, host);
+err_irq:
+	clk_disable(host->fclk);
+	clk_disable(host->iclk);
+	clk_put(host->fclk);
+	clk_put(host->iclk);
+	if (host->dbclk_enabled) {
+		clk_disable(host->dbclk);
+		clk_put(host->dbclk);
+	}
+
+err1:
+	iounmap(host->base);
+err:
+	dev_dbg(mmc_dev(host->mmc), "Probe Failed\n");
+	release_mem_region(res->start, res->end - res->start + 1);
+	if (host)
+		mmc_free_host(mmc);
+	return ret;
+}
+
+static int omap_mmc_remove(struct platform_device *pdev)
+{
+	struct mmc_omap_host *host = platform_get_drvdata(pdev);
+	struct resource *res;
+
+	if (host) {
+		mmc_remove_host(host->mmc);
+		if (host->pdata->cleanup)
+			host->pdata->cleanup(&pdev->dev);
+		free_irq(host->irq, host);
+		if (mmc_slot(host).card_detect_irq)
+			free_irq(mmc_slot(host).card_detect_irq, host);
+		flush_scheduled_work();
+
+		clk_disable(host->fclk);
+		clk_disable(host->iclk);
+		clk_put(host->fclk);
+		clk_put(host->iclk);
+		if (host->dbclk_enabled) {
+			clk_disable(host->dbclk);
+			clk_put(host->dbclk);
+		}
+
+		mmc_free_host(host->mmc);
+		iounmap(host->base);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res)
+		release_mem_region(res->start, res->end - res->start + 1);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int omap_mmc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	int ret = 0;
+	struct mmc_omap_host *host = platform_get_drvdata(pdev);
+
+	if (host && host->suspended)
+		return 0;
+
+	if (host) {
+		ret = mmc_suspend_host(host->mmc, state);
+		if (ret == 0) {
+			host->suspended = 1;
+
+			OMAP_HSMMC_WRITE(host->base, ISE, 0);
+			OMAP_HSMMC_WRITE(host->base, IE, 0);
+
+			if (host->pdata->suspend) {
+				ret = host->pdata->suspend(&pdev->dev,
+								host->slot_id);
+				if (ret)
+					dev_dbg(mmc_dev(host->mmc),
+						"Unable to handle MMC board"
+						" level suspend\n");
+			}
+
+			if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
+				OMAP_HSMMC_WRITE(host->base, HCTL,
+					OMAP_HSMMC_READ(host->base, HCTL)
+					& SDVSCLR);
+				OMAP_HSMMC_WRITE(host->base, HCTL,
+					OMAP_HSMMC_READ(host->base, HCTL)
+					| SDVS30);
+				OMAP_HSMMC_WRITE(host->base, HCTL,
+					OMAP_HSMMC_READ(host->base, HCTL)
+					| SDBP);
+			}
+
+			clk_disable(host->fclk);
+			clk_disable(host->iclk);
+			clk_disable(host->dbclk);
+		}
+
+	}
+	return ret;
+}
+
+/* Routine to resume the MMC device */
+static int omap_mmc_resume(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct mmc_omap_host *host = platform_get_drvdata(pdev);
+
+	if (host && !host->suspended)
+		return 0;
+
+	if (host) {
+
+		ret = clk_enable(host->fclk);
+		if (ret)
+			goto clk_en_err;
+
+		ret = clk_enable(host->iclk);
+		if (ret) {
+			clk_disable(host->fclk);
+			clk_put(host->fclk);
+			goto clk_en_err;
+		}
+
+		if (clk_enable(host->dbclk) != 0)
+			dev_dbg(mmc_dev(host->mmc),
+					"Enabling debounce clk failed\n");
+
+		if (host->pdata->resume) {
+			ret = host->pdata->resume(&pdev->dev, host->slot_id);
+			if (ret)
+				dev_dbg(mmc_dev(host->mmc),
+					"Unmask interrupt failed\n");
+		}
+
+		/* Notify the core to resume the host */
+		ret = mmc_resume_host(host->mmc);
+		if (ret == 0)
+			host->suspended = 0;
+	}
+
+	return ret;
+
+clk_en_err:
+	dev_dbg(mmc_dev(host->mmc),
+		"Failed to enable MMC clocks during resume\n");
+	return ret;
+}
+
+#else
+#define omap_mmc_suspend	NULL
+#define omap_mmc_resume		NULL
+#endif
+
+static struct platform_driver omap_mmc_driver = {
+	.probe		= omap_mmc_probe,
+	.remove		= omap_mmc_remove,
+	.suspend	= omap_mmc_suspend,
+	.resume		= omap_mmc_resume,
+	.driver		= {
+		.name = DRIVER_NAME,
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init omap_mmc_init(void)
+{
+	/* Register the MMC driver */
+	return platform_driver_register(&omap_mmc_driver);
+}
+
+static void __exit omap_mmc_cleanup(void)
+{
+	/* Unregister MMC driver */
+	platform_driver_unregister(&omap_mmc_driver);
+}
+
+module_init(omap_mmc_init);
+module_exit(omap_mmc_cleanup);
+
+MODULE_DESCRIPTION("OMAP High Speed Multimedia Card driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);
+MODULE_AUTHOR("Texas Instruments Inc");
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index fcc98a4..35a98ee 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -20,7 +20,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 
-#include <asm/dma.h>
+#include <mach/dma.h>
 
 #include <mach/regs-sdi.h>
 #include <mach/regs-gpio.h>
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 65929db..1f6eb25 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -676,7 +676,7 @@
 
 	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->numchips = %d\n",
 	        chip->numchips);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->chipsize = %ld\n",
+	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->chipsize = %lld\n",
 	        chip->chipsize);
 	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->pagemask = %8x\n",
 	        chip->pagemask);
@@ -703,7 +703,7 @@
 	dev_dbg(ctrl->dev, "fsl_elbc_init: nand->ecc.layout = %p\n",
 	        chip->ecc.layout);
 	dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->flags = %08x\n", mtd->flags);
-	dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->size = %d\n", mtd->size);
+	dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->size = %lld\n", mtd->size);
 	dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->erasesize = %d\n",
 	        mtd->erasesize);
 	dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->writesize = %d\n",
@@ -932,8 +932,8 @@
 #endif
 		add_mtd_device(&priv->mtd);
 
-	printk(KERN_INFO "eLBC NAND device at 0x%zx, bank %d\n",
-	       res.start, priv->bank);
+	printk(KERN_INFO "eLBC NAND device at 0x%llx, bank %d\n",
+	       (unsigned long long)res.start, priv->bank);
 	return 0;
 
 err:
diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c
index 9bd6c9a..a8b9376 100644
--- a/drivers/mtd/nand/pasemi_nand.c
+++ b/drivers/mtd/nand/pasemi_nand.c
@@ -107,7 +107,7 @@
 	if (pasemi_nand_mtd)
 		return -ENODEV;
 
-	pr_debug("pasemi_nand at %lx-%lx\n", res.start, res.end);
+	pr_debug("pasemi_nand at %llx-%llx\n", res.start, res.end);
 
 	/* Allocate memory for MTD device structure and private data */
 	pasemi_nand_mtd = kzalloc(sizeof(struct mtd_info) +
@@ -170,7 +170,7 @@
 		goto out_lpc;
 	}
 
-	printk(KERN_INFO "PA Semi NAND flash at %08lx, control at I/O %x\n",
+	printk(KERN_INFO "PA Semi NAND flash at %08llx, control at I/O %x\n",
 	       res.start, lpcctl);
 
 	return 0;
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index 96ecc17..77a4f14 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -629,7 +629,7 @@
 	}
 
 	if (c->gpio_irq) {
-		if ((r = omap_request_gpio(c->gpio_irq)) < 0) {
+		if ((r = gpio_request(c->gpio_irq, "OneNAND irq")) < 0) {
 			dev_err(&pdev->dev,  "Failed to request GPIO%d for "
 				"OneNAND\n", c->gpio_irq);
 			goto err_iounmap;
@@ -726,7 +726,7 @@
 		free_irq(gpio_to_irq(c->gpio_irq), c);
 err_release_gpio:
 	if (c->gpio_irq)
-		omap_free_gpio(c->gpio_irq);
+		gpio_free(c->gpio_irq);
 err_iounmap:
 	iounmap(c->onenand.base);
 err_release_mem_region:
@@ -761,7 +761,7 @@
 	platform_set_drvdata(pdev, NULL);
 	if (c->gpio_irq) {
 		free_irq(gpio_to_irq(c->gpio_irq), c);
-		omap_free_gpio(c->gpio_irq);
+		gpio_free(c->gpio_irq);
 	}
 	iounmap(c->onenand.base);
 	release_mem_region(c->phys_base, ONENAND_IO_SIZE);
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 9fe8cb7..6bdfd47 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1829,7 +1829,7 @@
 
 config FEC
 	bool "FEC ethernet controller (of ColdFire CPUs)"
-	depends on M523x || M527x || M5272 || M528x || M520x
+	depends on M523x || M527x || M5272 || M528x || M520x || M532x
 	help
 	  Say Y here if you want to use the built-in 10/100 Fast ethernet
 	  controller on some Motorola ColdFire processors.
diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c
index 0c628a9..c2d012fc 100644
--- a/drivers/net/arm/am79c961a.c
+++ b/drivers/net/arm/am79c961a.c
@@ -208,9 +208,9 @@
 	/*
 	 * Stop the chip.
 	 */
-	spin_lock_irqsave(priv->chip_lock, flags);
+	spin_lock_irqsave(&priv->chip_lock, flags);
 	write_rreg (dev->base_addr, CSR0, CSR0_BABL|CSR0_CERR|CSR0_MISS|CSR0_MERR|CSR0_TINT|CSR0_RINT|CSR0_STOP);
-	spin_unlock_irqrestore(priv->chip_lock, flags);
+	spin_unlock_irqrestore(&priv->chip_lock, flags);
 
 	write_ireg (dev->base_addr, 5, 0x00a0); /* Receive address LED */
 	write_ireg (dev->base_addr, 6, 0x0081); /* Collision LED */
@@ -332,10 +332,10 @@
 	netif_stop_queue(dev);
 	netif_carrier_off(dev);
 
-	spin_lock_irqsave(priv->chip_lock, flags);
+	spin_lock_irqsave(&priv->chip_lock, flags);
 	write_rreg (dev->base_addr, CSR0, CSR0_STOP);
 	write_rreg (dev->base_addr, CSR3, CSR3_MASKALL);
-	spin_unlock_irqrestore(priv->chip_lock, flags);
+	spin_unlock_irqrestore(&priv->chip_lock, flags);
 
 	free_irq (dev->irq, dev);
 
@@ -391,7 +391,7 @@
 			am79c961_mc_hash(dmi, multi_hash);
 	}
 
-	spin_lock_irqsave(priv->chip_lock, flags);
+	spin_lock_irqsave(&priv->chip_lock, flags);
 
 	stopped = read_rreg(dev->base_addr, CSR0) & CSR0_STOP;
 
@@ -405,9 +405,9 @@
 		 * Spin waiting for chip to report suspend mode
 		 */
 		while ((read_rreg(dev->base_addr, CTRL1) & CTRL1_SPND) == 0) {
-			spin_unlock_irqrestore(priv->chip_lock, flags);
+			spin_unlock_irqrestore(&priv->chip_lock, flags);
 			nop();
-			spin_lock_irqsave(priv->chip_lock, flags);
+			spin_lock_irqsave(&priv->chip_lock, flags);
 		}
 	}
 
@@ -429,7 +429,7 @@
 		write_rreg(dev->base_addr, CTRL1, 0);
 	}
 
-	spin_unlock_irqrestore(priv->chip_lock, flags);
+	spin_unlock_irqrestore(&priv->chip_lock, flags);
 }
 
 static void am79c961_timeout(struct net_device *dev)
@@ -467,10 +467,10 @@
 	am_writeword (dev, hdraddr + 2, TMD_OWN|TMD_STP|TMD_ENP);
 	priv->txhead = head;
 
-	spin_lock_irqsave(priv->chip_lock, flags);
+	spin_lock_irqsave(&priv->chip_lock, flags);
 	write_rreg (dev->base_addr, CSR0, CSR0_TDMD|CSR0_IENA);
 	dev->trans_start = jiffies;
-	spin_unlock_irqrestore(priv->chip_lock, flags);
+	spin_unlock_irqrestore(&priv->chip_lock, flags);
 
 	/*
 	 * If the next packet is owned by the ethernet device,
diff --git a/drivers/net/arm/etherh.c b/drivers/net/arm/etherh.c
index 745ac18..d15d8b7 100644
--- a/drivers/net/arm/etherh.c
+++ b/drivers/net/arm/etherh.c
@@ -646,7 +646,7 @@
 	.ndo_get_stats		= ei_get_stats,
 	.ndo_set_multicast_list = ei_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_mac_addr	= eth_set_mac_addr,
+	.ndo_set_mac_address	= eth_set_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= ei_poll,
diff --git a/drivers/net/ax88796.c b/drivers/net/ax88796.c
index 337488e..a4eb6c4 100644
--- a/drivers/net/ax88796.c
+++ b/drivers/net/ax88796.c
@@ -37,7 +37,10 @@
 #define __ei_open       ax_ei_open
 #define __ei_close      ax_ei_close
 #define __ei_poll	ax_ei_poll
+#define __ei_start_xmit ax_ei_start_xmit
 #define __ei_tx_timeout ax_ei_tx_timeout
+#define __ei_get_stats  ax_ei_get_stats
+#define __ei_set_multicast_list ax_ei_set_multicast_list
 #define __ei_interrupt  ax_ei_interrupt
 #define ____alloc_ei_netdev ax__alloc_ei_netdev
 #define __NS8390_init   ax_NS8390_init
@@ -623,6 +626,23 @@
 }
 #endif
 
+static const struct net_device_ops ax_netdev_ops = {
+	.ndo_open		= ax_open,
+	.ndo_stop		= ax_close,
+	.ndo_do_ioctl		= ax_ioctl,
+
+	.ndo_start_xmit		= ax_ei_start_xmit,
+	.ndo_tx_timeout		= ax_ei_tx_timeout,
+	.ndo_get_stats		= ax_ei_get_stats,
+	.ndo_set_multicast_list = ax_ei_set_multicast_list,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= ax_ei_poll,
+#endif
+};
+
 /* setup code */
 
 static void ax_initial_setup(struct net_device *dev, struct ei_device *ei_local)
@@ -738,9 +758,7 @@
 	ei_status.get_8390_hdr	= &ax_get_8390_hdr;
 	ei_status.priv = 0;
 
-	dev->open		= ax_open;
-	dev->stop		= ax_close;
-	dev->do_ioctl		= ax_ioctl;
+	dev->netdev_ops		= &ax_netdev_ops;
 	dev->ethtool_ops	= &ax_ethtool_ops;
 
 	ax->msg_enable		= NETIF_MSG_LINK;
@@ -753,9 +771,6 @@
 	ax->mii.mdio_write	= ax_phy_write;
 	ax->mii.dev		= dev;
 
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	dev->poll_controller = ax_ei_poll;
-#endif
 	ax_NS8390_init(dev, 0);
 
 	if (first_init)
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index 5ae131c1..c38512e 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -679,6 +679,7 @@
 			dev_kfree_skb_any(skb);
 			return -ENOMEM;
 		}
+		bp->force_copybreak = 1;
 	}
 
 	rh = (struct rx_header *) skb->data;
@@ -800,7 +801,7 @@
 		/* Omit CRC. */
 		len -= 4;
 
-		if (len > RX_COPY_THRESHOLD) {
+		if (!bp->force_copybreak && len > RX_COPY_THRESHOLD) {
 			int skb_size;
 			skb_size = b44_alloc_rx_skb(bp, cons, bp->rx_prod);
 			if (skb_size < 0)
@@ -2152,6 +2153,7 @@
 	bp = netdev_priv(dev);
 	bp->sdev = sdev;
 	bp->dev = dev;
+	bp->force_copybreak = 0;
 
 	bp->msg_enable = netif_msg_init(b44_debug, B44_DEF_MSG_ENABLE);
 
diff --git a/drivers/net/b44.h b/drivers/net/b44.h
index 7db0c84..e678498 100644
--- a/drivers/net/b44.h
+++ b/drivers/net/b44.h
@@ -395,7 +395,7 @@
 	u32			rx_pending;
 	u32			tx_pending;
 	u8			phy_addr;
-
+	u8			force_copybreak;
 	struct mii_if_info	mii_if;
 };
 
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index fd705d1..15a5cf0 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -1,6 +1,6 @@
 /* bnx2x.h: Broadcom Everest network driver.
  *
- * Copyright (c) 2007-2008 Broadcom Corporation
+ * Copyright (c) 2007-2009 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -20,6 +20,11 @@
  * (you will need to reboot afterwards) */
 /* #define BNX2X_STOP_ON_ERROR */
 
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+#define BCM_VLAN			1
+#endif
+
+
 /* error/debug prints */
 
 #define DRV_MODULE_NAME		"bnx2x"
@@ -78,11 +83,6 @@
 #endif
 
 
-#ifdef NETIF_F_HW_VLAN_TX
-#define BCM_VLAN			1
-#endif
-
-
 #define U64_LO(x)			(u32)(((u64)(x)) & 0xffffffff)
 #define U64_HI(x)			(u32)(((u64)(x)) >> 32)
 #define HILO_U64(hi, lo)		((((u64)(hi)) << 32) + (lo))
@@ -150,6 +150,9 @@
 
 #define PAGES_PER_SGE_SHIFT		0
 #define PAGES_PER_SGE			(1 << PAGES_PER_SGE_SHIFT)
+#define SGE_PAGE_SIZE			PAGE_SIZE
+#define SGE_PAGE_SHIFT			PAGE_SHIFT
+#define SGE_PAGE_ALIGN(addr)		PAGE_ALIGN(addr)
 
 #define BCM_RX_ETH_PAYLOAD_ALIGN	64
 
@@ -268,14 +271,7 @@
 
 #define bnx2x_fp(bp, nr, var)		(bp->fp[nr].var)
 
-#define BNX2X_HAS_TX_WORK(fp) \
-			((fp->tx_pkt_prod != le16_to_cpu(*fp->tx_cons_sb)) || \
-			 (fp->tx_pkt_prod != fp->tx_pkt_cons))
-
-#define BNX2X_HAS_RX_WORK(fp) \
-			(fp->rx_comp_cons != rx_cons_sb)
-
-#define BNX2X_HAS_WORK(fp)	(BNX2X_HAS_RX_WORK(fp) || BNX2X_HAS_TX_WORK(fp))
+#define BNX2X_HAS_WORK(fp)	(bnx2x_has_rx_work(fp) || bnx2x_has_tx_work(fp))
 
 
 /* MC hsi */
@@ -736,7 +732,7 @@
 	struct bnx2x_fastpath	fp[MAX_CONTEXT];
 	void __iomem		*regview;
 	void __iomem		*doorbells;
-#define BNX2X_DB_SIZE		(16*2048)
+#define BNX2X_DB_SIZE		(16*BCM_PAGE_SIZE)
 
 	struct net_device	*dev;
 	struct pci_dev		*pdev;
@@ -801,6 +797,8 @@
 #define TPA_ENABLE_FLAG			0x80
 #define NO_MCP_FLAG			0x100
 #define BP_NOMCP(bp)			(bp->flags & NO_MCP_FLAG)
+#define HW_VLAN_TX_FLAG			0x400
+#define HW_VLAN_RX_FLAG			0x800
 
 	int			func;
 #define BP_PORT(bp)			(bp->func % PORT_MAX)
@@ -811,7 +809,7 @@
 	int			pm_cap;
 	int			pcie_cap;
 
-	struct work_struct	sp_task;
+	struct delayed_work	sp_task;
 	struct work_struct	reset_task;
 
 	struct timer_list	timer;
diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c
index fefa6ab..aea26b4 100644
--- a/drivers/net/bnx2x_link.c
+++ b/drivers/net/bnx2x_link.c
@@ -1,4 +1,4 @@
-/* Copyright 2008 Broadcom Corporation
+/* Copyright 2008-2009 Broadcom Corporation
  *
  * Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
@@ -317,6 +317,9 @@
 		val &= ~0x810;
 	EMAC_WR(bp, EMAC_REG_EMAC_MODE, val);
 
+	/* enable emac */
+	REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 1);
+
 	/* enable emac for jumbo packets */
 	EMAC_WR(bp, EMAC_REG_EMAC_RX_MTU_SIZE,
 		(EMAC_RX_MTU_SIZE_JUMBO_ENA |
@@ -1609,7 +1612,7 @@
 				      u32 gp_status)
 {
 	struct bnx2x *bp = params->bp;
-
+	u16 new_line_speed;
 	u8 rc = 0;
 	vars->link_status = 0;
 
@@ -1629,7 +1632,7 @@
 
 		switch (gp_status & GP_STATUS_SPEED_MASK) {
 		case GP_STATUS_10M:
-			vars->line_speed = SPEED_10;
+			new_line_speed = SPEED_10;
 			if (vars->duplex == DUPLEX_FULL)
 				vars->link_status |= LINK_10TFD;
 			else
@@ -1637,7 +1640,7 @@
 			break;
 
 		case GP_STATUS_100M:
-			vars->line_speed = SPEED_100;
+			new_line_speed = SPEED_100;
 			if (vars->duplex == DUPLEX_FULL)
 				vars->link_status |= LINK_100TXFD;
 			else
@@ -1646,7 +1649,7 @@
 
 		case GP_STATUS_1G:
 		case GP_STATUS_1G_KX:
-			vars->line_speed = SPEED_1000;
+			new_line_speed = SPEED_1000;
 			if (vars->duplex == DUPLEX_FULL)
 				vars->link_status |= LINK_1000TFD;
 			else
@@ -1654,7 +1657,7 @@
 			break;
 
 		case GP_STATUS_2_5G:
-			vars->line_speed = SPEED_2500;
+			new_line_speed = SPEED_2500;
 			if (vars->duplex == DUPLEX_FULL)
 				vars->link_status |= LINK_2500TFD;
 			else
@@ -1671,32 +1674,32 @@
 		case GP_STATUS_10G_KX4:
 		case GP_STATUS_10G_HIG:
 		case GP_STATUS_10G_CX4:
-			vars->line_speed = SPEED_10000;
+			new_line_speed = SPEED_10000;
 			vars->link_status |= LINK_10GTFD;
 			break;
 
 		case GP_STATUS_12G_HIG:
-			vars->line_speed = SPEED_12000;
+			new_line_speed = SPEED_12000;
 			vars->link_status |= LINK_12GTFD;
 			break;
 
 		case GP_STATUS_12_5G:
-			vars->line_speed = SPEED_12500;
+			new_line_speed = SPEED_12500;
 			vars->link_status |= LINK_12_5GTFD;
 			break;
 
 		case GP_STATUS_13G:
-			vars->line_speed = SPEED_13000;
+			new_line_speed = SPEED_13000;
 			vars->link_status |= LINK_13GTFD;
 			break;
 
 		case GP_STATUS_15G:
-			vars->line_speed = SPEED_15000;
+			new_line_speed = SPEED_15000;
 			vars->link_status |= LINK_15GTFD;
 			break;
 
 		case GP_STATUS_16G:
-			vars->line_speed = SPEED_16000;
+			new_line_speed = SPEED_16000;
 			vars->link_status |= LINK_16GTFD;
 			break;
 
@@ -1708,6 +1711,15 @@
 			break;
 		}
 
+		/* Upon link speed change set the NIG into drain mode.
+		Comes to deals with possible FIFO glitch due to clk change
+		when speed is decreased without link down indicator */
+		if (new_line_speed != vars->line_speed) {
+			REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE
+				    + params->port*4, 0);
+			msleep(1);
+		}
+		vars->line_speed = new_line_speed;
 		vars->link_status |= LINK_STATUS_SERDES_LINK;
 
 		if ((params->req_line_speed == SPEED_AUTO_NEG) &&
@@ -3571,7 +3583,7 @@
 			       (MDIO_REG_BANK_CL73_IEEEB0 +
 				(MDIO_CL73_IEEEB0_CL73_AN_CONTROL & 0xf)),
 			       0x6041);
-
+		msleep(200);
 		/* set aer mmd back */
 		bnx2x_set_aer_mmd(params, vars);
 
@@ -3870,9 +3882,15 @@
 	}
 
 	if (vars->phy_flags & PHY_XGXS_FLAG) {
-		if (params->req_line_speed &&
+		if ((params->req_line_speed &&
 		    ((params->req_line_speed == SPEED_100) ||
-		     (params->req_line_speed == SPEED_10))) {
+		     (params->req_line_speed == SPEED_10))) ||
+		    (!params->req_line_speed &&
+		     (params->speed_cap_mask >=
+		       PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) &&
+		     (params->speed_cap_mask <
+		       PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)
+		     ))  {
 			vars->phy_flags |= PHY_SGMII_FLAG;
 		} else {
 			vars->phy_flags &= ~PHY_SGMII_FLAG;
@@ -4194,6 +4212,11 @@
 	/* activate nig drain */
 	REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
 
+	/* disable emac */
+	REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0);
+
+	msleep(10);
+
 	/* reset BigMac */
 	bnx2x_bmac_rx_disable(bp, params->port);
 	REG_WR(bp, GRCBASE_MISC +
@@ -4238,6 +4261,7 @@
 
 	/* update shared memory */
 	bnx2x_update_mng(params, vars->link_status);
+	msleep(20);
 	return rc;
 }
 /* This function should called upon link interrupt */
@@ -4276,6 +4300,9 @@
 	  REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68),
 	  REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68));
 
+	/* disable emac */
+	REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0);
+
 	ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
 
 	/* Check external link change only for non-direct */
@@ -4377,10 +4404,11 @@
 			      ext_phy_addr[port],
 			      MDIO_PMA_DEVAD,
 			      MDIO_PMA_REG_ROM_VER1, &fw_ver1);
-		if (fw_ver1 == 0) {
+		if (fw_ver1 == 0 || fw_ver1 == 0x4321) {
 			DP(NETIF_MSG_LINK,
-				 "bnx2x_8073_common_init_phy port %x "
-				 "fw Download failed\n", port);
+				 "bnx2x_8073_common_init_phy port %x:"
+				 "Download failed. fw version = 0x%x\n",
+				 port, fw_ver1);
 			return -EINVAL;
 		}
 
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 4be0584..d3e7775 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -1,6 +1,6 @@
 /* bnx2x_main.c: Broadcom Everest network driver.
  *
- * Copyright (c) 2007-2008 Broadcom Corporation
+ * Copyright (c) 2007-2009 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -38,9 +38,7 @@
 #include <linux/time.h>
 #include <linux/ethtool.h>
 #include <linux/mii.h>
-#ifdef NETIF_F_HW_VLAN_TX
-	#include <linux/if_vlan.h>
-#endif
+#include <linux/if_vlan.h>
 #include <net/ip.h>
 #include <net/tcp.h>
 #include <net/checksum.h>
@@ -59,8 +57,8 @@
 #include "bnx2x.h"
 #include "bnx2x_init.h"
 
-#define DRV_MODULE_VERSION	"1.45.23"
-#define DRV_MODULE_RELDATE	"2008/11/03"
+#define DRV_MODULE_VERSION	"1.45.26"
+#define DRV_MODULE_RELDATE	"2009/01/26"
 #define BNX2X_BC_VER		0x040200
 
 /* Time in jiffies before concluding the transmitter is hung */
@@ -71,7 +69,7 @@
 	DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
 
 MODULE_AUTHOR("Eliezer Tamir");
-MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710 Driver");
+MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710/57711/57711E Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_MODULE_VERSION);
 
@@ -95,6 +93,7 @@
 module_param(use_multi, int, 0);
 MODULE_PARM_DESC(use_multi, "use per-CPU queues");
 #endif
+static struct workqueue_struct *bnx2x_wq;
 
 enum bnx2x_board_type {
 	BCM57710 = 0,
@@ -671,7 +670,8 @@
 		synchronize_irq(bp->pdev->irq);
 
 	/* make sure sp_task is not running */
-	cancel_work_sync(&bp->sp_task);
+	cancel_delayed_work(&bp->sp_task);
+	flush_workqueue(bnx2x_wq);
 }
 
 /* fast path */
@@ -733,6 +733,24 @@
  * fast path service functions
  */
 
+static inline int bnx2x_has_tx_work(struct bnx2x_fastpath *fp)
+{
+	u16 tx_cons_sb;
+
+	/* Tell compiler that status block fields can change */
+	barrier();
+	tx_cons_sb = le16_to_cpu(*fp->tx_cons_sb);
+	return (fp->tx_pkt_cons != tx_cons_sb);
+}
+
+static inline int bnx2x_has_tx_work_unload(struct bnx2x_fastpath *fp)
+{
+	/* Tell compiler that consumer and producer can change */
+	barrier();
+	return (fp->tx_pkt_prod != fp->tx_pkt_cons);
+
+}
+
 /* free skb in the packet ring at pos idx
  * return idx of last bd freed
  */
@@ -972,7 +990,7 @@
 		return;
 
 	pci_unmap_page(bp->pdev, pci_unmap_addr(sw_buf, mapping),
-		       BCM_PAGE_SIZE*PAGES_PER_SGE, PCI_DMA_FROMDEVICE);
+		       SGE_PAGE_SIZE*PAGES_PER_SGE, PCI_DMA_FROMDEVICE);
 	__free_pages(page, PAGES_PER_SGE_SHIFT);
 
 	sw_buf->page = NULL;
@@ -1000,7 +1018,7 @@
 	if (unlikely(page == NULL))
 		return -ENOMEM;
 
-	mapping = pci_map_page(bp->pdev, page, 0, BCM_PAGE_SIZE*PAGES_PER_SGE,
+	mapping = pci_map_page(bp->pdev, page, 0, SGE_PAGE_SIZE*PAGES_PER_SGE,
 			       PCI_DMA_FROMDEVICE);
 	if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) {
 		__free_pages(page, PAGES_PER_SGE_SHIFT);
@@ -1096,9 +1114,9 @@
 				  struct eth_fast_path_rx_cqe *fp_cqe)
 {
 	struct bnx2x *bp = fp->bp;
-	u16 sge_len = BCM_PAGE_ALIGN(le16_to_cpu(fp_cqe->pkt_len) -
+	u16 sge_len = SGE_PAGE_ALIGN(le16_to_cpu(fp_cqe->pkt_len) -
 				     le16_to_cpu(fp_cqe->len_on_bd)) >>
-		      BCM_PAGE_SHIFT;
+		      SGE_PAGE_SHIFT;
 	u16 last_max, last_elem, first_elem;
 	u16 delta = 0;
 	u16 i;
@@ -1203,22 +1221,22 @@
 			       u16 cqe_idx)
 {
 	struct sw_rx_page *rx_pg, old_rx_pg;
-	struct page *sge;
 	u16 len_on_bd = le16_to_cpu(fp_cqe->len_on_bd);
 	u32 i, frag_len, frag_size, pages;
 	int err;
 	int j;
 
 	frag_size = le16_to_cpu(fp_cqe->pkt_len) - len_on_bd;
-	pages = BCM_PAGE_ALIGN(frag_size) >> BCM_PAGE_SHIFT;
+	pages = SGE_PAGE_ALIGN(frag_size) >> SGE_PAGE_SHIFT;
 
 	/* This is needed in order to enable forwarding support */
 	if (frag_size)
-		skb_shinfo(skb)->gso_size = min((u32)BCM_PAGE_SIZE,
+		skb_shinfo(skb)->gso_size = min((u32)SGE_PAGE_SIZE,
 					       max(frag_size, (u32)len_on_bd));
 
 #ifdef BNX2X_STOP_ON_ERROR
-	if (pages > 8*PAGES_PER_SGE) {
+	if (pages >
+	    min((u32)8, (u32)MAX_SKB_FRAGS) * SGE_PAGE_SIZE * PAGES_PER_SGE) {
 		BNX2X_ERR("SGL length is too long: %d. CQE index is %d\n",
 			  pages, cqe_idx);
 		BNX2X_ERR("fp_cqe->pkt_len = %d  fp_cqe->len_on_bd = %d\n",
@@ -1234,9 +1252,8 @@
 
 		/* FW gives the indices of the SGE as if the ring is an array
 		   (meaning that "next" element will consume 2 indices) */
-		frag_len = min(frag_size, (u32)(BCM_PAGE_SIZE*PAGES_PER_SGE));
+		frag_len = min(frag_size, (u32)(SGE_PAGE_SIZE*PAGES_PER_SGE));
 		rx_pg = &fp->rx_page_ring[sge_idx];
-		sge = rx_pg->page;
 		old_rx_pg = *rx_pg;
 
 		/* If we fail to allocate a substitute page, we simply stop
@@ -1249,7 +1266,7 @@
 
 		/* Unmap the page as we r going to pass it to the stack */
 		pci_unmap_page(bp->pdev, pci_unmap_addr(&old_rx_pg, mapping),
-			      BCM_PAGE_SIZE*PAGES_PER_SGE, PCI_DMA_FROMDEVICE);
+			      SGE_PAGE_SIZE*PAGES_PER_SGE, PCI_DMA_FROMDEVICE);
 
 		/* Add one frag and update the appropriate fields in the skb */
 		skb_fill_page_desc(skb, j, old_rx_pg.page, 0, frag_len);
@@ -1282,6 +1299,13 @@
 	if (likely(new_skb)) {
 		/* fix ip xsum and give it to the stack */
 		/* (no need to map the new skb) */
+#ifdef BCM_VLAN
+		int is_vlan_cqe =
+			(le16_to_cpu(cqe->fast_path_cqe.pars_flags.flags) &
+			 PARSING_FLAGS_VLAN);
+		int is_not_hwaccel_vlan_cqe =
+			(is_vlan_cqe && (!(bp->flags & HW_VLAN_RX_FLAG)));
+#endif
 
 		prefetch(skb);
 		prefetch(((char *)(skb)) + 128);
@@ -1306,6 +1330,12 @@
 			struct iphdr *iph;
 
 			iph = (struct iphdr *)skb->data;
+#ifdef BCM_VLAN
+			/* If there is no Rx VLAN offloading -
+			   take VLAN tag into an account */
+			if (unlikely(is_not_hwaccel_vlan_cqe))
+				iph = (struct iphdr *)((u8 *)iph + VLAN_HLEN);
+#endif
 			iph->check = 0;
 			iph->check = ip_fast_csum((u8 *)iph, iph->ihl);
 		}
@@ -1313,9 +1343,8 @@
 		if (!bnx2x_fill_frag_skb(bp, fp, skb,
 					 &cqe->fast_path_cqe, cqe_idx)) {
 #ifdef BCM_VLAN
-			if ((bp->vlgrp != NULL) &&
-			    (le16_to_cpu(cqe->fast_path_cqe.pars_flags.flags) &
-			     PARSING_FLAGS_VLAN))
+			if ((bp->vlgrp != NULL) && is_vlan_cqe &&
+			    (!is_not_hwaccel_vlan_cqe))
 				vlan_hwaccel_receive_skb(skb, bp->vlgrp,
 						le16_to_cpu(cqe->fast_path_cqe.
 							    vlan_tag));
@@ -1355,11 +1384,23 @@
 	rx_prods.cqe_prod = rx_comp_prod;
 	rx_prods.sge_prod = rx_sge_prod;
 
+	/*
+	 * Make sure that the BD and SGE data is updated before updating the
+	 * producers since FW might read the BD/SGE right after the producer
+	 * is updated.
+	 * This is only applicable for weak-ordered memory model archs such
+	 * as IA-64. The following barrier is also mandatory since FW will
+	 * assumes BDs must have buffers.
+	 */
+	wmb();
+
 	for (i = 0; i < sizeof(struct tstorm_eth_rx_producers)/4; i++)
 		REG_WR(bp, BAR_TSTRORM_INTMEM +
 		       TSTORM_RX_PRODS_OFFSET(BP_PORT(bp), FP_CL_ID(fp)) + i*4,
 		       ((u32 *)&rx_prods)[i]);
 
+	mmiowb(); /* keep prod updates ordered */
+
 	DP(NETIF_MSG_RX_STATUS,
 	   "Wrote: bd_prod %u  cqe_prod %u  sge_prod %u\n",
 	   bd_prod, rx_comp_prod, rx_sge_prod);
@@ -1415,7 +1456,7 @@
 		DP(NETIF_MSG_RX_STATUS, "CQE type %x  err %x  status %x"
 		   "  queue %x  vlan %x  len %u\n", CQE_TYPE(cqe_fp_flags),
 		   cqe_fp_flags, cqe->fast_path_cqe.status_flags,
-		   cqe->fast_path_cqe.rss_hash_result,
+		   le32_to_cpu(cqe->fast_path_cqe.rss_hash_result),
 		   le16_to_cpu(cqe->fast_path_cqe.vlan_tag),
 		   le16_to_cpu(cqe->fast_path_cqe.pkt_len));
 
@@ -1547,7 +1588,7 @@
 		}
 
 #ifdef BCM_VLAN
-		if ((bp->vlgrp != NULL) &&
+		if ((bp->vlgrp != NULL) && (bp->flags & HW_VLAN_RX_FLAG) &&
 		    (le16_to_cpu(cqe->fast_path_cqe.pars_flags.flags) &
 		     PARSING_FLAGS_VLAN))
 			vlan_hwaccel_receive_skb(skb, bp->vlgrp,
@@ -1580,7 +1621,6 @@
 	/* Update producers */
 	bnx2x_update_rx_prod(bp, fp, bd_prod_fw, sw_comp_prod,
 			     fp->rx_sge_prod);
-	mmiowb(); /* keep prod updates ordered */
 
 	fp->rx_pkt += rx_pkt;
 	fp->rx_calls++;
@@ -1660,7 +1700,7 @@
 
 
 	if (unlikely(status & 0x1)) {
-		schedule_work(&bp->sp_task);
+		queue_delayed_work(bnx2x_wq, &bp->sp_task, 0);
 
 		status &= ~0x1;
 		if (!status)
@@ -1887,7 +1927,8 @@
 
 static void bnx2x_calc_fc_adv(struct bnx2x *bp)
 {
-	switch (bp->link_vars.ieee_fc) {
+	switch (bp->link_vars.ieee_fc &
+		MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK) {
 	case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE:
 		bp->port.advertising &= ~(ADVERTISED_Asym_Pause |
 					  ADVERTISED_Pause);
@@ -1957,10 +1998,11 @@
 		rc = bnx2x_phy_init(&bp->link_params, &bp->link_vars);
 		bnx2x_release_phy_lock(bp);
 
+		bnx2x_calc_fc_adv(bp);
+
 		if (bp->link_vars.link_up)
 			bnx2x_link_report(bp);
 
-		bnx2x_calc_fc_adv(bp);
 
 		return rc;
 	}
@@ -2220,9 +2262,7 @@
 	/* Make sure that we are synced with the current statistics */
 	bnx2x_stats_handle(bp, STATS_EVENT_STOP);
 
-	bnx2x_acquire_phy_lock(bp);
 	bnx2x_link_update(&bp->link_params, &bp->link_vars);
-	bnx2x_release_phy_lock(bp);
 
 	if (bp->link_vars.link_up) {
 
@@ -2471,6 +2511,8 @@
 	if (asserted & ATTN_HARD_WIRED_MASK) {
 		if (asserted & ATTN_NIG_FOR_FUNC) {
 
+			bnx2x_acquire_phy_lock(bp);
+
 			/* save nig interrupt mask */
 			bp->nig_mask = REG_RD(bp, nig_int_mask_addr);
 			REG_WR(bp, nig_int_mask_addr, 0);
@@ -2526,8 +2568,10 @@
 	REG_WR(bp, hc_addr, asserted);
 
 	/* now set back the mask */
-	if (asserted & ATTN_NIG_FOR_FUNC)
+	if (asserted & ATTN_NIG_FOR_FUNC) {
 		REG_WR(bp, nig_int_mask_addr, bp->nig_mask);
+		bnx2x_release_phy_lock(bp);
+	}
 }
 
 static inline void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn)
@@ -2795,8 +2839,10 @@
 static void bnx2x_attn_int(struct bnx2x *bp)
 {
 	/* read local copy of bits */
-	u32 attn_bits = bp->def_status_blk->atten_status_block.attn_bits;
-	u32 attn_ack = bp->def_status_blk->atten_status_block.attn_bits_ack;
+	u32 attn_bits = le32_to_cpu(bp->def_status_blk->atten_status_block.
+								attn_bits);
+	u32 attn_ack = le32_to_cpu(bp->def_status_blk->atten_status_block.
+								attn_bits_ack);
 	u32 attn_state = bp->attn_state;
 
 	/* look for changed bits */
@@ -2820,7 +2866,7 @@
 
 static void bnx2x_sp_task(struct work_struct *work)
 {
-	struct bnx2x *bp = container_of(work, struct bnx2x, sp_task);
+	struct bnx2x *bp = container_of(work, struct bnx2x, sp_task.work);
 	u16 status;
 
 
@@ -2844,7 +2890,7 @@
 	if (status & 0x2)
 		bp->stats_pending = 0;
 
-	bnx2x_ack_sb(bp, DEF_SB_ID, ATTENTION_ID, bp->def_att_idx,
+	bnx2x_ack_sb(bp, DEF_SB_ID, ATTENTION_ID, le16_to_cpu(bp->def_att_idx),
 		     IGU_INT_NOP, 1);
 	bnx2x_ack_sb(bp, DEF_SB_ID, USTORM_ID, le16_to_cpu(bp->def_u_idx),
 		     IGU_INT_NOP, 1);
@@ -2875,7 +2921,7 @@
 		return IRQ_HANDLED;
 #endif
 
-	schedule_work(&bp->sp_task);
+	queue_delayed_work(bnx2x_wq, &bp->sp_task, 0);
 
 	return IRQ_HANDLED;
 }
@@ -2892,7 +2938,7 @@
 #define ADD_64(s_hi, a_hi, s_lo, a_lo) \
 	do { \
 		s_lo += a_lo; \
-		s_hi += a_hi + (s_lo < a_lo) ? 1 : 0; \
+		s_hi += a_hi + ((s_lo < a_lo) ? 1 : 0); \
 	} while (0)
 
 /* difference = minuend - subtrahend */
@@ -4496,7 +4542,7 @@
 
 static void bnx2x_init_ind_table(struct bnx2x *bp)
 {
-	int port = BP_PORT(bp);
+	int func = BP_FUNC(bp);
 	int i;
 
 	if (!is_multi(bp))
@@ -4505,10 +4551,8 @@
 	DP(NETIF_MSG_IFUP, "Initializing indirection table\n");
 	for (i = 0; i < TSTORM_INDIRECTION_TABLE_SIZE; i++)
 		REG_WR8(bp, BAR_TSTRORM_INTMEM +
-			TSTORM_INDIRECTION_TABLE_OFFSET(port) + i,
-			i % bp->num_queues);
-
-	REG_WR(bp, PRS_REG_A_PRSU_20, 0xf);
+			TSTORM_INDIRECTION_TABLE_OFFSET(func) + i,
+			BP_CL_ID(bp) + (i % bp->num_queues));
 }
 
 static void bnx2x_set_client_config(struct bnx2x *bp)
@@ -4517,12 +4561,12 @@
 	int port = BP_PORT(bp);
 	int i;
 
-	tstorm_client.mtu = bp->dev->mtu + ETH_OVREHEAD;
+	tstorm_client.mtu = bp->dev->mtu;
 	tstorm_client.statistics_counter_id = BP_CL_ID(bp);
 	tstorm_client.config_flags =
 				TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE;
 #ifdef BCM_VLAN
-	if (bp->rx_mode && bp->vlgrp) {
+	if (bp->rx_mode && bp->vlgrp && (bp->flags & HW_VLAN_RX_FLAG)) {
 		tstorm_client.config_flags |=
 				TSTORM_ETH_CLIENT_CONFIG_VLAN_REMOVAL_ENABLE;
 		DP(NETIF_MSG_IFUP, "vlan removal enabled\n");
@@ -4531,7 +4575,7 @@
 
 	if (bp->flags & TPA_ENABLE_FLAG) {
 		tstorm_client.max_sges_for_packet =
-			BCM_PAGE_ALIGN(tstorm_client.mtu) >> BCM_PAGE_SHIFT;
+			SGE_PAGE_ALIGN(tstorm_client.mtu) >> SGE_PAGE_SHIFT;
 		tstorm_client.max_sges_for_packet =
 			((tstorm_client.max_sges_for_packet +
 			  PAGES_PER_SGE - 1) & (~(PAGES_PER_SGE - 1))) >>
@@ -4714,10 +4758,11 @@
 			 bp->e1hov);
 	}
 
-	/* Init CQ ring mapping and aggregation size */
-	max_agg_size = min((u32)(bp->rx_buf_size +
-				 8*BCM_PAGE_SIZE*PAGES_PER_SGE),
-			   (u32)0xffff);
+	/* Init CQ ring mapping and aggregation size, the FW limit is 8 frags */
+	max_agg_size =
+		min((u32)(min((u32)8, (u32)MAX_SKB_FRAGS) *
+			  SGE_PAGE_SIZE * PAGES_PER_SGE),
+		    (u32)0xffff);
 	for_each_queue(bp, i) {
 		struct bnx2x_fastpath *fp = &bp->fp[i];
 
@@ -4785,6 +4830,15 @@
 	bnx2x_init_context(bp);
 	bnx2x_init_internal(bp, load_code);
 	bnx2x_init_ind_table(bp);
+	bnx2x_stats_init(bp);
+
+	/* At this point, we are ready for interrupts */
+	atomic_set(&bp->intr_sem, 0);
+
+	/* flush all before enabling interrupts */
+	mb();
+	mmiowb();
+
 	bnx2x_int_enable(bp);
 }
 
@@ -5101,12 +5155,21 @@
 }
 
 
+static void bnx2x_reset_common(struct bnx2x *bp)
+{
+	/* reset_common */
+	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
+	       0xd3ffff7f);
+	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, 0x1403);
+}
+
 static int bnx2x_init_common(struct bnx2x *bp)
 {
 	u32 val, i;
 
 	DP(BNX2X_MSG_MCP, "starting common init  func %d\n", BP_FUNC(bp));
 
+	bnx2x_reset_common(bp);
 	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff);
 	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, 0xfffc);
 
@@ -5134,7 +5197,6 @@
 	REG_WR(bp, PXP2_REG_RQ_SRC_ENDIAN_M, 1);
 	REG_WR(bp, PXP2_REG_RQ_CDU_ENDIAN_M, 1);
 	REG_WR(bp, PXP2_REG_RQ_DBG_ENDIAN_M, 1);
-	REG_WR(bp, PXP2_REG_RQ_HC_ENDIAN_M, 1);
 
 /*	REG_WR(bp, PXP2_REG_RD_PBF_SWAP_MODE, 1); */
 	REG_WR(bp, PXP2_REG_RD_QM_SWAP_MODE, 1);
@@ -5212,6 +5274,7 @@
 	}
 
 	bnx2x_init_block(bp, PRS_COMMON_START, PRS_COMMON_END);
+	REG_WR(bp, PRS_REG_A_PRSU_20, 0xf);
 	/* set NIC mode */
 	REG_WR(bp, PRS_REG_NIC_MODE, 1);
 	if (CHIP_IS_E1H(bp))
@@ -6087,8 +6150,8 @@
 static void bnx2x_netif_stop(struct bnx2x *bp, int disable_hw)
 {
 	bnx2x_int_disable_sync(bp, disable_hw);
+	bnx2x_napi_disable(bp);
 	if (netif_running(bp->dev)) {
-		bnx2x_napi_disable(bp);
 		netif_tx_disable(bp->dev);
 		bp->dev->trans_start = jiffies;	/* prevent tx timeout */
 	}
@@ -6108,7 +6171,7 @@
 	 * multicast 64-127:port0 128-191:port1
 	 */
 	config->hdr.length_6b = 2;
-	config->hdr.offset = port ? 31 : 0;
+	config->hdr.offset = port ? 32 : 0;
 	config->hdr.client_id = BP_CL_ID(bp);
 	config->hdr.reserved1 = 0;
 
@@ -6272,7 +6335,7 @@
 static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 {
 	u32 load_code;
-	int i, rc;
+	int i, rc = 0;
 #ifdef BNX2X_STOP_ON_ERROR
 	if (unlikely(bp->panic))
 		return -EPERM;
@@ -6280,6 +6343,77 @@
 
 	bp->state = BNX2X_STATE_OPENING_WAIT4_LOAD;
 
+	if (use_inta) {
+		bp->num_queues = 1;
+
+	} else {
+		if ((use_multi > 1) && (use_multi <= BP_MAX_QUEUES(bp)))
+			/* user requested number */
+			bp->num_queues = use_multi;
+
+		else if (use_multi)
+			bp->num_queues = min_t(u32, num_online_cpus(),
+					       BP_MAX_QUEUES(bp));
+		else
+			bp->num_queues = 1;
+
+		DP(NETIF_MSG_IFUP,
+		   "set number of queues to %d\n", bp->num_queues);
+
+		/* if we can't use MSI-X we only need one fp,
+		 * so try to enable MSI-X with the requested number of fp's
+		 * and fallback to MSI or legacy INTx with one fp
+		 */
+		rc = bnx2x_enable_msix(bp);
+		if (rc) {
+			/* failed to enable MSI-X */
+			bp->num_queues = 1;
+			if (use_multi)
+				BNX2X_ERR("Multi requested but failed"
+					  " to enable MSI-X\n");
+		}
+	}
+
+	if (bnx2x_alloc_mem(bp))
+		return -ENOMEM;
+
+	for_each_queue(bp, i)
+		bnx2x_fp(bp, i, disable_tpa) =
+					((bp->flags & TPA_ENABLE_FLAG) == 0);
+
+	for_each_queue(bp, i)
+		netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi),
+			       bnx2x_poll, 128);
+
+#ifdef BNX2X_STOP_ON_ERROR
+	for_each_queue(bp, i) {
+		struct bnx2x_fastpath *fp = &bp->fp[i];
+
+		fp->poll_no_work = 0;
+		fp->poll_calls = 0;
+		fp->poll_max_calls = 0;
+		fp->poll_complete = 0;
+		fp->poll_exit = 0;
+	}
+#endif
+	bnx2x_napi_enable(bp);
+
+	if (bp->flags & USING_MSIX_FLAG) {
+		rc = bnx2x_req_msix_irqs(bp);
+		if (rc) {
+			pci_disable_msix(bp->pdev);
+			goto load_error1;
+		}
+		printk(KERN_INFO PFX "%s: using MSI-X\n", bp->dev->name);
+	} else {
+		bnx2x_ack_int(bp);
+		rc = bnx2x_req_irq(bp);
+		if (rc) {
+			BNX2X_ERR("IRQ request failed  rc %d, aborting\n", rc);
+			goto load_error1;
+		}
+	}
+
 	/* Send LOAD_REQUEST command to MCP
 	   Returns the type of LOAD command:
 	   if it is the first port to be initialized
@@ -6289,10 +6423,13 @@
 		load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ);
 		if (!load_code) {
 			BNX2X_ERR("MCP response failure, aborting\n");
-			return -EBUSY;
+			rc = -EBUSY;
+			goto load_error2;
 		}
-		if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED)
-			return -EBUSY; /* other port in diagnostic mode */
+		if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED) {
+			rc = -EBUSY; /* other port in diagnostic mode */
+			goto load_error2;
+		}
 
 	} else {
 		int port = BP_PORT(bp);
@@ -6318,66 +6455,11 @@
 		bp->port.pmf = 0;
 	DP(NETIF_MSG_LINK, "pmf %d\n", bp->port.pmf);
 
-	/* if we can't use MSI-X we only need one fp,
-	 * so try to enable MSI-X with the requested number of fp's
-	 * and fallback to inta with one fp
-	 */
-	if (use_inta) {
-		bp->num_queues = 1;
-
-	} else {
-		if ((use_multi > 1) && (use_multi <= BP_MAX_QUEUES(bp)))
-			/* user requested number */
-			bp->num_queues = use_multi;
-
-		else if (use_multi)
-			bp->num_queues = min_t(u32, num_online_cpus(),
-					       BP_MAX_QUEUES(bp));
-		else
-			bp->num_queues = 1;
-
-		if (bnx2x_enable_msix(bp)) {
-			/* failed to enable MSI-X */
-			bp->num_queues = 1;
-			if (use_multi)
-				BNX2X_ERR("Multi requested but failed"
-					  " to enable MSI-X\n");
-		}
-	}
-	DP(NETIF_MSG_IFUP,
-	   "set number of queues to %d\n", bp->num_queues);
-
-	if (bnx2x_alloc_mem(bp))
-		return -ENOMEM;
-
-	for_each_queue(bp, i)
-		bnx2x_fp(bp, i, disable_tpa) =
-					((bp->flags & TPA_ENABLE_FLAG) == 0);
-
-	if (bp->flags & USING_MSIX_FLAG) {
-		rc = bnx2x_req_msix_irqs(bp);
-		if (rc) {
-			pci_disable_msix(bp->pdev);
-			goto load_error;
-		}
-	} else {
-		bnx2x_ack_int(bp);
-		rc = bnx2x_req_irq(bp);
-		if (rc) {
-			BNX2X_ERR("IRQ request failed, aborting\n");
-			goto load_error;
-		}
-	}
-
-	for_each_queue(bp, i)
-		netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi),
-			       bnx2x_poll, 128);
-
 	/* Initialize HW */
 	rc = bnx2x_init_hw(bp, load_code);
 	if (rc) {
 		BNX2X_ERR("HW init failed, aborting\n");
-		goto load_int_disable;
+		goto load_error2;
 	}
 
 	/* Setup NIC internals and enable interrupts */
@@ -6389,25 +6471,16 @@
 		if (!load_code) {
 			BNX2X_ERR("MCP response failure, aborting\n");
 			rc = -EBUSY;
-			goto load_rings_free;
+			goto load_error3;
 		}
 	}
 
-	bnx2x_stats_init(bp);
-
 	bp->state = BNX2X_STATE_OPENING_WAIT4_PORT;
 
-	/* Enable Rx interrupt handling before sending the ramrod
-	   as it's completed on Rx FP queue */
-	bnx2x_napi_enable(bp);
-
-	/* Enable interrupt handling */
-	atomic_set(&bp->intr_sem, 0);
-
 	rc = bnx2x_setup_leading(bp);
 	if (rc) {
 		BNX2X_ERR("Setup leading failed!\n");
-		goto load_netif_stop;
+		goto load_error3;
 	}
 
 	if (CHIP_IS_E1H(bp))
@@ -6420,7 +6493,7 @@
 		for_each_nondefault_queue(bp, i) {
 			rc = bnx2x_setup_multi(bp, i);
 			if (rc)
-				goto load_netif_stop;
+				goto load_error3;
 		}
 
 	if (CHIP_IS_E1(bp))
@@ -6436,18 +6509,18 @@
 	case LOAD_NORMAL:
 		/* Tx queue should be only reenabled */
 		netif_wake_queue(bp->dev);
+		/* Initialize the receive filter. */
 		bnx2x_set_rx_mode(bp->dev);
 		break;
 
 	case LOAD_OPEN:
 		netif_start_queue(bp->dev);
+		/* Initialize the receive filter. */
 		bnx2x_set_rx_mode(bp->dev);
-		if (bp->flags & USING_MSIX_FLAG)
-			printk(KERN_INFO PFX "%s: using MSI-X\n",
-			       bp->dev->name);
 		break;
 
 	case LOAD_DIAG:
+		/* Initialize the receive filter. */
 		bnx2x_set_rx_mode(bp->dev);
 		bp->state = BNX2X_STATE_DIAG;
 		break;
@@ -6465,20 +6538,25 @@
 
 	return 0;
 
-load_netif_stop:
-	bnx2x_napi_disable(bp);
-load_rings_free:
+load_error3:
+	bnx2x_int_disable_sync(bp, 1);
+	if (!BP_NOMCP(bp)) {
+		bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP);
+		bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE);
+	}
+	bp->port.pmf = 0;
 	/* Free SKBs, SGEs, TPA pool and driver internals */
 	bnx2x_free_skbs(bp);
 	for_each_queue(bp, i)
 		bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
-load_int_disable:
-	bnx2x_int_disable_sync(bp, 1);
+load_error2:
 	/* Release IRQs */
 	bnx2x_free_irq(bp);
-load_error:
+load_error1:
+	bnx2x_napi_disable(bp);
+	for_each_queue(bp, i)
+		netif_napi_del(&bnx2x_fp(bp, i, napi));
 	bnx2x_free_mem(bp);
-	bp->port.pmf = 0;
 
 	/* TBD we really need to reset the chip
 	   if we want to recover from this */
@@ -6551,6 +6629,7 @@
 		}
 		cnt--;
 		msleep(1);
+		rmb(); /* Refresh the dsb_sp_prod */
 	}
 	bp->state = BNX2X_STATE_CLOSING_WAIT4_UNLOAD;
 	bp->fp[0].state = BNX2X_FP_STATE_CLOSED;
@@ -6602,14 +6681,6 @@
 	/* TODO: Close Doorbell port? */
 }
 
-static void bnx2x_reset_common(struct bnx2x *bp)
-{
-	/* reset_common */
-	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
-	       0xd3ffff7f);
-	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, 0x1403);
-}
-
 static void bnx2x_reset_chip(struct bnx2x *bp, u32 reset_code)
 {
 	DP(BNX2X_MSG_MCP, "function %d  reset_code %x\n",
@@ -6650,20 +6721,22 @@
 	bnx2x_set_storm_rx_mode(bp);
 
 	bnx2x_netif_stop(bp, 1);
-	if (!netif_running(bp->dev))
-		bnx2x_napi_disable(bp);
+
 	del_timer_sync(&bp->timer);
 	SHMEM_WR(bp, func_mb[BP_FUNC(bp)].drv_pulse_mb,
 		 (DRV_PULSE_ALWAYS_ALIVE | bp->fw_drv_pulse_wr_seq));
 	bnx2x_stats_handle(bp, STATS_EVENT_STOP);
 
+	/* Release IRQs */
+	bnx2x_free_irq(bp);
+
 	/* Wait until tx fast path tasks complete */
 	for_each_queue(bp, i) {
 		struct bnx2x_fastpath *fp = &bp->fp[i];
 
 		cnt = 1000;
 		smp_rmb();
-		while (BNX2X_HAS_TX_WORK(fp)) {
+		while (bnx2x_has_tx_work_unload(fp)) {
 
 			bnx2x_tx_int(fp, 1000);
 			if (!cnt) {
@@ -6684,9 +6757,6 @@
 	/* Give HW time to discard old tx messages */
 	msleep(1);
 
-	/* Release IRQs */
-	bnx2x_free_irq(bp);
-
 	if (CHIP_IS_E1(bp)) {
 		struct mac_configuration_cmd *config =
 						bnx2x_sp(bp, mcast_config);
@@ -6795,6 +6865,8 @@
 	bnx2x_free_skbs(bp);
 	for_each_queue(bp, i)
 		bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
+	for_each_queue(bp, i)
+		netif_napi_del(&bnx2x_fp(bp, i, napi));
 	bnx2x_free_mem(bp);
 
 	bp->state = BNX2X_STATE_CLOSED;
@@ -6847,10 +6919,6 @@
 		 */
 		bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
 		val = REG_RD(bp, DORQ_REG_NORM_CID_OFST);
-		if (val == 0x7)
-			REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0);
-		bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
-
 		if (val == 0x7) {
 			u32 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
 			/* save our func */
@@ -6858,6 +6926,9 @@
 			u32 swap_en;
 			u32 swap_val;
 
+			/* clear the UNDI indication */
+			REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0);
+
 			BNX2X_DEV_INFO("UNDI is active! reset device\n");
 
 			/* try unload UNDI on port 0 */
@@ -6883,6 +6954,9 @@
 				bnx2x_fw_command(bp, reset_code);
 			}
 
+			/* now it's safe to release the lock */
+			bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
+
 			REG_WR(bp, (BP_PORT(bp) ? HC_REG_CONFIG_1 :
 				    HC_REG_CONFIG_0), 0x1000);
 
@@ -6927,7 +7001,9 @@
 			bp->fw_seq =
 			       (SHMEM_RD(bp, func_mb[bp->func].drv_mb_header) &
 				DRV_MSG_SEQ_NUMBER_MASK);
-		}
+
+		} else
+			bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
 	}
 }
 
@@ -6944,7 +7020,7 @@
 	id |= ((val & 0xf) << 12);
 	val = REG_RD(bp, MISC_REG_CHIP_METAL);
 	id |= ((val & 0xff) << 4);
-	REG_RD(bp, MISC_REG_BOND_ID);
+	val = REG_RD(bp, MISC_REG_BOND_ID);
 	id |= (val & 0xf);
 	bp->common.chip_id = id;
 	bp->link_params.chip_id = bp->common.chip_id;
@@ -7501,7 +7577,7 @@
 
 	mutex_init(&bp->port.phy_mutex);
 
-	INIT_WORK(&bp->sp_task, bnx2x_sp_task);
+	INIT_DELAYED_WORK(&bp->sp_task, bnx2x_sp_task);
 	INIT_WORK(&bp->reset_task, bnx2x_reset_task);
 
 	rc = bnx2x_get_hwinfo(bp);
@@ -8076,6 +8152,9 @@
 	struct bnx2x *bp = netdev_priv(dev);
 	int rc;
 
+	if (!netif_running(dev))
+		return -EAGAIN;
+
 	DP(BNX2X_MSG_NVM, "ethtool_eeprom: cmd %d\n"
 	   DP_LEVEL "  magic 0x%x  offset 0x%x (%d)  len 0x%x (%d)\n",
 	   eeprom->cmd, eeprom->magic, eeprom->offset, eeprom->offset,
@@ -8678,18 +8757,17 @@
 
 	if (loopback_mode == BNX2X_MAC_LOOPBACK) {
 		bp->link_params.loopback_mode = LOOPBACK_BMAC;
-		bnx2x_acquire_phy_lock(bp);
 		bnx2x_phy_init(&bp->link_params, &bp->link_vars);
-		bnx2x_release_phy_lock(bp);
 
 	} else if (loopback_mode == BNX2X_PHY_LOOPBACK) {
+		u16 cnt = 1000;
 		bp->link_params.loopback_mode = LOOPBACK_XGXS_10;
-		bnx2x_acquire_phy_lock(bp);
 		bnx2x_phy_init(&bp->link_params, &bp->link_vars);
-		bnx2x_release_phy_lock(bp);
 		/* wait until link state is restored */
-		bnx2x_wait_for_link(bp, link_up);
-
+		if (link_up)
+			while (cnt-- && bnx2x_test_link(&bp->link_params,
+							&bp->link_vars))
+				msleep(10);
 	} else
 		return -EINVAL;
 
@@ -8727,6 +8805,8 @@
 	tx_bd->general_data = ((UNICAST_ADDRESS <<
 				ETH_TX_BD_ETH_ADDR_TYPE_SHIFT) | 1);
 
+	wmb();
+
 	fp->hw_tx_prods->bds_prod =
 		cpu_to_le16(le16_to_cpu(fp->hw_tx_prods->bds_prod) + 1);
 	mb(); /* FW restriction: must not reorder writing nbd and packets */
@@ -8778,7 +8858,6 @@
 	/* Update producers */
 	bnx2x_update_rx_prod(bp, fp, fp->rx_bd_prod, fp->rx_comp_prod,
 			     fp->rx_sge_prod);
-	mmiowb(); /* keep prod updates ordered */
 
 test_loopback_exit:
 	bp->link_params.loopback_mode = LOOPBACK_NONE;
@@ -8794,6 +8873,7 @@
 		return BNX2X_LOOPBACK_FAILED;
 
 	bnx2x_netif_stop(bp, 1);
+	bnx2x_acquire_phy_lock(bp);
 
 	if (bnx2x_run_loopback(bp, BNX2X_MAC_LOOPBACK, link_up)) {
 		DP(NETIF_MSG_PROBE, "MAC loopback failed\n");
@@ -8805,6 +8885,7 @@
 		rc |= BNX2X_PHY_LOOPBACK_FAILED;
 	}
 
+	bnx2x_release_phy_lock(bp);
 	bnx2x_netif_start(bp);
 
 	return rc;
@@ -8878,7 +8959,10 @@
 		return -ENODEV;
 
 	config->hdr.length_6b = 0;
-	config->hdr.offset = 0;
+	if (CHIP_IS_E1(bp))
+		config->hdr.offset = (BP_PORT(bp) ? 32 : 0);
+	else
+		config->hdr.offset = BP_FUNC(bp);
 	config->hdr.client_id = BP_CL_ID(bp);
 	config->hdr.reserved1 = 0;
 
@@ -9243,6 +9327,18 @@
 	return 0;
 }
 
+static inline int bnx2x_has_rx_work(struct bnx2x_fastpath *fp)
+{
+	u16 rx_cons_sb;
+
+	/* Tell compiler that status block fields can change */
+	barrier();
+	rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb);
+	if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT)
+		rx_cons_sb++;
+	return (fp->rx_comp_cons != rx_cons_sb);
+}
+
 /*
  * net_device service functions
  */
@@ -9253,7 +9349,6 @@
 						 napi);
 	struct bnx2x *bp = fp->bp;
 	int work_done = 0;
-	u16 rx_cons_sb;
 
 #ifdef BNX2X_STOP_ON_ERROR
 	if (unlikely(bp->panic))
@@ -9266,19 +9361,12 @@
 
 	bnx2x_update_fpsb_idx(fp);
 
-	if (BNX2X_HAS_TX_WORK(fp))
+	if (bnx2x_has_tx_work(fp))
 		bnx2x_tx_int(fp, budget);
 
-	rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb);
-	if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT)
-		rx_cons_sb++;
-	if (BNX2X_HAS_RX_WORK(fp))
+	if (bnx2x_has_rx_work(fp))
 		work_done = bnx2x_rx_int(fp, budget);
-
 	rmb(); /* BNX2X_HAS_WORK() reads the status block */
-	rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb);
-	if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT)
-		rx_cons_sb++;
 
 	/* must not complete if we consumed full budget */
 	if ((work_done < budget) && !BNX2X_HAS_WORK(fp)) {
@@ -9389,6 +9477,7 @@
 	return rc;
 }
 
+#if (MAX_SKB_FRAGS >= MAX_FETCH_BD - 3)
 /* check if packet requires linearization (packet is too fragmented) */
 static int bnx2x_pkt_req_lin(struct bnx2x *bp, struct sk_buff *skb,
 			     u32 xmit_type)
@@ -9466,6 +9555,7 @@
 
 	return to_copy;
 }
+#endif
 
 /* called with netif_tx_lock
  * bnx2x_tx_int() runs without netif_tx_lock unless it needs to call
@@ -9506,6 +9596,7 @@
 	   skb->ip_summed, skb->protocol, ipv6_hdr(skb)->nexthdr,
 	   ip_hdr(skb)->protocol, skb_shinfo(skb)->gso_type, xmit_type);
 
+#if (MAX_SKB_FRAGS >= MAX_FETCH_BD - 3)
 	/* First, check if we need to linearize the skb
 	   (due to FW restrictions) */
 	if (bnx2x_pkt_req_lin(bp, skb, xmit_type)) {
@@ -9518,6 +9609,7 @@
 			return NETDEV_TX_OK;
 		}
 	}
+#endif
 
 	/*
 	Please read carefully. First we use one BD which we mark as start,
@@ -9549,11 +9641,14 @@
 	   "sending pkt %u @%p  next_idx %u  bd %u @%p\n",
 	   pkt_prod, tx_buf, fp->tx_pkt_prod, bd_prod, tx_bd);
 
-	if ((bp->vlgrp != NULL) && vlan_tx_tag_present(skb)) {
+#ifdef BCM_VLAN
+	if ((bp->vlgrp != NULL) && vlan_tx_tag_present(skb) &&
+	    (bp->flags & HW_VLAN_TX_FLAG)) {
 		tx_bd->vlan = cpu_to_le16(vlan_tx_tag_get(skb));
 		tx_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_VLAN_TAG;
 		vlan_off += 4;
 	} else
+#endif
 		tx_bd->vlan = cpu_to_le16(pkt_prod);
 
 	if (xmit_type) {
@@ -9705,6 +9800,15 @@
 
 	DP(NETIF_MSG_TX_QUEUED, "doorbell: nbd %d  bd %u\n", nbd, bd_prod);
 
+	/*
+	 * Make sure that the BD data is updated before updating the producer
+	 * since FW might read the BD right after the producer is updated.
+	 * This is only applicable for weak-ordered memory model archs such
+	 * as IA-64. The following barrier is also mandatory since FW will
+	 * assumes packets must have BDs.
+	 */
+	wmb();
+
 	fp->hw_tx_prods->bds_prod =
 		cpu_to_le16(le16_to_cpu(fp->hw_tx_prods->bds_prod) + nbd);
 	mb(); /* FW restriction: must not reorder writing nbd and packets */
@@ -9718,6 +9822,9 @@
 	dev->trans_start = jiffies;
 
 	if (unlikely(bnx2x_tx_avail(fp) < MAX_SKB_FRAGS + 3)) {
+		/* We want bnx2x_tx_int to "see" the updated tx_bd_prod
+		   if we put Tx into XOFF state. */
+		smp_mb();
 		netif_stop_queue(dev);
 		bp->eth_stats.driver_xoff++;
 		if (bnx2x_tx_avail(fp) >= MAX_SKB_FRAGS + 3)
@@ -9733,6 +9840,8 @@
 {
 	struct bnx2x *bp = netdev_priv(dev);
 
+	netif_carrier_off(dev);
+
 	bnx2x_set_power_state(bp, PCI_D0);
 
 	return bnx2x_nic_load(bp, LOAD_OPEN);
@@ -9816,7 +9925,7 @@
 				for (; i < old; i++) {
 					if (CAM_IS_INVALID(config->
 							   config_table[i])) {
-						i--; /* already invalidated */
+						/* already invalidated */
 						break;
 					}
 					/* invalidate */
@@ -9987,6 +10096,16 @@
 	struct bnx2x *bp = netdev_priv(dev);
 
 	bp->vlgrp = vlgrp;
+
+	/* Set flags according to the required capabilities */
+	bp->flags &= ~(HW_VLAN_RX_FLAG | HW_VLAN_TX_FLAG);
+
+	if (dev->features & NETIF_F_HW_VLAN_TX)
+		bp->flags |= HW_VLAN_TX_FLAG;
+
+	if (dev->features & NETIF_F_HW_VLAN_RX)
+		bp->flags |= HW_VLAN_RX_FLAG;
+
 	if (netif_running(dev))
 		bnx2x_set_client_config(bp);
 }
@@ -10143,6 +10262,7 @@
 		dev->features |= NETIF_F_HIGHDMA;
 #ifdef BCM_VLAN
 	dev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX);
+	bp->flags |= (HW_VLAN_RX_FLAG | HW_VLAN_TX_FLAG);
 #endif
 	dev->features |= (NETIF_F_TSO | NETIF_F_TSO_ECN);
 	dev->features |= NETIF_F_TSO6;
@@ -10215,22 +10335,18 @@
 		return rc;
 	}
 
+	pci_set_drvdata(pdev, dev);
+
+	rc = bnx2x_init_bp(bp);
+	if (rc)
+		goto init_one_exit;
+
 	rc = register_netdev(dev);
 	if (rc) {
 		dev_err(&pdev->dev, "Cannot register net device\n");
 		goto init_one_exit;
 	}
 
-	pci_set_drvdata(pdev, dev);
-
-	rc = bnx2x_init_bp(bp);
-	if (rc) {
-		unregister_netdev(dev);
-		goto init_one_exit;
-	}
-
-	netif_carrier_off(dev);
-
 	bp->common.name = board_info[ent->driver_data].name;
 	printk(KERN_INFO "%s: %s (%c%d) PCI-E x%d %s found at mem %lx,"
 	       " IRQ %d, ", dev->name, bp->common.name,
@@ -10378,6 +10494,8 @@
 	bnx2x_free_skbs(bp);
 	for_each_queue(bp, i)
 		bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
+	for_each_queue(bp, i)
+		netif_napi_del(&bnx2x_fp(bp, i, napi));
 	bnx2x_free_mem(bp);
 
 	bp->state = BNX2X_STATE_CLOSED;
@@ -10519,12 +10637,20 @@
 
 static int __init bnx2x_init(void)
 {
+	bnx2x_wq = create_singlethread_workqueue("bnx2x");
+	if (bnx2x_wq == NULL) {
+		printk(KERN_ERR PFX "Cannot create workqueue\n");
+		return -ENOMEM;
+	}
+
 	return pci_register_driver(&bnx2x_pci_driver);
 }
 
 static void __exit bnx2x_cleanup(void)
 {
 	pci_unregister_driver(&bnx2x_pci_driver);
+
+	destroy_workqueue(bnx2x_wq);
 }
 
 module_init(bnx2x_init);
diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h
index a67b0c3..d084e5fc 100644
--- a/drivers/net/bnx2x_reg.h
+++ b/drivers/net/bnx2x_reg.h
@@ -1,6 +1,6 @@
 /* bnx2x_reg.h: Broadcom Everest network driver.
  *
- * Copyright (c) 2007-2008 Broadcom Corporation
+ * Copyright (c) 2007-2009 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index 14f9fb3..379a132 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -2104,6 +2104,7 @@
 {
 	lro_mgr->dev = qs->netdev;
 	lro_mgr->features = LRO_F_NAPI;
+	lro_mgr->frag_align_pad = NET_IP_ALIGN;
 	lro_mgr->ip_summed = CHECKSUM_UNNECESSARY;
 	lro_mgr->ip_summed_aggr = CHECKSUM_UNNECESSARY;
 	lro_mgr->max_desc = T3_MAX_LRO_SES;
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index cf43ee74..0890162 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -981,11 +981,15 @@
 		ew32(PBA_ECC, reg);
 	}
 
-	/* PCI-Ex Control Register */
+	/* PCI-Ex Control Registers */
 	if (hw->mac.type == e1000_82574) {
 		reg = er32(GCR);
 		reg |= (1 << 22);
 		ew32(GCR, reg);
+
+		reg = er32(GCR2);
+		reg |= 1;
+		ew32(GCR2, reg);
 	}
 
 	return;
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index f25e961..2d4ce04 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -206,6 +206,7 @@
 	E1000_MANC2H    = 0x05860, /* Management Control To Host - RW */
 	E1000_SW_FW_SYNC = 0x05B5C, /* Software-Firmware Synchronization - RW */
 	E1000_GCR	= 0x05B00, /* PCI-Ex Control */
+	E1000_GCR2      = 0x05B64, /* PCI-Ex Control #2 */
 	E1000_FACTPS    = 0x05B30, /* Function Active and Power State to MNG */
 	E1000_SWSM      = 0x05B50, /* SW Semaphore */
 	E1000_FWSM      = 0x05B54, /* FW Semaphore */
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index e3131ea..dfe9226 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -132,7 +132,7 @@
 	int x;
 	unsigned char *deb = adr;
 	for (x = 0; x < len; x += 16) {
-		printk(DRV_NAME " %s adr=%p ofs=%04x %016lx %016lx\n", msg,
+		printk(DRV_NAME " %s adr=%p ofs=%04x %016llx %016llx\n", msg,
 			  deb, x, *((u64 *)&deb[0]), *((u64 *)&deb[8]));
 		deb += 16;
 	}
@@ -883,7 +883,7 @@
 
 	while (eqe) {
 		qp_token = EHEA_BMASK_GET(EHEA_EQE_QP_TOKEN, eqe->entry);
-		ehea_error("QP aff_err: entry=0x%lx, token=0x%x",
+		ehea_error("QP aff_err: entry=0x%llx, token=0x%x",
 			   eqe->entry, qp_token);
 
 		qp = port->port_res[qp_token].qp;
@@ -1159,7 +1159,7 @@
 		netif_stop_queue(port->netdev);
 		break;
 	default:
-		ehea_error("unknown event code %x, eqe=0x%lX", ec, eqe);
+		ehea_error("unknown event code %x, eqe=0x%llX", ec, eqe);
 		break;
 	}
 }
@@ -1971,7 +1971,7 @@
 		}
 
 		if (dev->mc_count > port->adapter->max_mc_mac) {
-			ehea_info("Mcast registration limit reached (0x%lx). "
+			ehea_info("Mcast registration limit reached (0x%llx). "
 				  "Use ALLMULTI!",
 				  port->adapter->max_mc_mac);
 			goto out;
diff --git a/drivers/net/ehea/ehea_qmr.c b/drivers/net/ehea/ehea_qmr.c
index 225c692..49d766e 100644
--- a/drivers/net/ehea/ehea_qmr.c
+++ b/drivers/net/ehea/ehea_qmr.c
@@ -168,7 +168,7 @@
 					     cq->fw_handle, rpage, 1);
 		if (hret < H_SUCCESS) {
 			ehea_error("register_rpage_cq failed ehea_cq=%p "
-				   "hret=%lx counter=%i act_pages=%i",
+				   "hret=%llx counter=%i act_pages=%i",
 				   cq, hret, counter, cq->attr.nr_pages);
 			goto out_kill_hwq;
 		}
@@ -178,13 +178,13 @@
 
 			if ((hret != H_SUCCESS) || (vpage)) {
 				ehea_error("registration of pages not "
-					   "complete hret=%lx\n", hret);
+					   "complete hret=%llx\n", hret);
 				goto out_kill_hwq;
 			}
 		} else {
 			if (hret != H_PAGE_REGISTERED) {
 				ehea_error("CQ: registration of page failed "
-					   "hret=%lx\n", hret);
+					   "hret=%llx\n", hret);
 				goto out_kill_hwq;
 			}
 		}
@@ -986,15 +986,15 @@
 		length = EHEA_PAGESIZE;
 
 	if (type == 0x8) /* Queue Pair */
-		ehea_error("QP (resource=%lX) state: AER=0x%lX, AERR=0x%lX, "
-			   "port=%lX", resource, data[6], data[12], data[22]);
+		ehea_error("QP (resource=%llX) state: AER=0x%llX, AERR=0x%llX, "
+			   "port=%llX", resource, data[6], data[12], data[22]);
 
 	if (type == 0x4) /* Completion Queue */
-		ehea_error("CQ (resource=%lX) state: AER=0x%lX", resource,
+		ehea_error("CQ (resource=%llX) state: AER=0x%llX", resource,
 			   data[6]);
 
 	if (type == 0x3) /* Event Queue */
-		ehea_error("EQ (resource=%lX) state: AER=0x%lX", resource,
+		ehea_error("EQ (resource=%llX) state: AER=0x%llX", resource,
 			   data[6]);
 
 	ehea_dump(data, length, "error data");
@@ -1016,11 +1016,11 @@
 				rblock);
 
 	if (ret == H_R_STATE)
-		ehea_error("No error data is available: %lX.", res_handle);
+		ehea_error("No error data is available: %llX.", res_handle);
 	else if (ret == H_SUCCESS)
 		print_error_data(rblock);
 	else
-		ehea_error("Error data could not be fetched: %lX", res_handle);
+		ehea_error("Error data could not be fetched: %llX", res_handle);
 
 	kfree(rblock);
 }
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index 7e33c12..2769083 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -1698,7 +1698,7 @@
 	/*
 	 * Set MII speed to 2.5 MHz
 	 */
-	fep->phy_speed = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2;
+	fep->phy_speed = (MCF_CLK / 3) / (2500000 * 2 ) * 2;
 	fecp->fec_mii_speed = fep->phy_speed;
 
 	fec_restart(dev, 0);
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index 4e6a919..ce900e5 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -795,6 +795,7 @@
 
 	err = fs_init_phy(dev);
 	if (err) {
+		free_irq(fep->interrupt, dev);
 		if (fep->fpi->use_napi)
 			napi_disable(&fep->napi);
 		return err;
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index efcbeb6..3f7eab4 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -1423,15 +1423,11 @@
 {
 	struct gfar_private *priv = netdev_priv(dev);
 	unsigned long flags;
-	struct vlan_group *old_grp;
 	u32 tempval;
 
 	spin_lock_irqsave(&priv->rxlock, flags);
 
-	old_grp = priv->vlgrp;
-
-	if (old_grp == grp)
-		return;
+	priv->vlgrp = grp;
 
 	if (grp) {
 		/* Enable VLAN tag insertion */
@@ -1622,10 +1618,18 @@
 static void gfar_schedule_cleanup(struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->txlock, flags);
+	spin_lock(&priv->rxlock);
+
 	if (netif_rx_schedule_prep(&priv->napi)) {
 		gfar_write(&priv->regs->imask, IMASK_RTX_DISABLED);
 		__netif_rx_schedule(&priv->napi);
 	}
+
+	spin_unlock(&priv->rxlock);
+	spin_unlock_irqrestore(&priv->txlock, flags);
 }
 
 /* Interrupt Handler for Transmit complete */
diff --git a/drivers/net/ibm_newemac/mal.c b/drivers/net/ibm_newemac/mal.c
index ecf9798..2a2fc17 100644
--- a/drivers/net/ibm_newemac/mal.c
+++ b/drivers/net/ibm_newemac/mal.c
@@ -613,7 +613,9 @@
 	INIT_LIST_HEAD(&mal->list);
 	spin_lock_init(&mal->lock);
 
-	netif_napi_add(NULL, &mal->napi, mal_poll,
+	init_dummy_netdev(&mal->dummy_dev);
+
+	netif_napi_add(&mal->dummy_dev, &mal->napi, mal_poll,
 		       CONFIG_IBM_NEW_EMAC_POLL_WEIGHT);
 
 	/* Load power-on reset defaults */
diff --git a/drivers/net/ibm_newemac/mal.h b/drivers/net/ibm_newemac/mal.h
index 2f0a873..9ededfb 100644
--- a/drivers/net/ibm_newemac/mal.h
+++ b/drivers/net/ibm_newemac/mal.h
@@ -214,6 +214,8 @@
 	int			index;
 	spinlock_t		lock;
 
+	struct net_device	dummy_dev;
+
 	unsigned int features;
 };
 
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index ca3bb9f..dfa6348 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -602,7 +602,7 @@
 
 	if(lpar_rc != H_SUCCESS) {
 		ibmveth_error_printk("h_register_logical_lan failed with %ld\n", lpar_rc);
-		ibmveth_error_printk("buffer TCE:0x%lx filter TCE:0x%lx rxq desc:0x%lx MAC:0x%lx\n",
+		ibmveth_error_printk("buffer TCE:0x%llx filter TCE:0x%llx rxq desc:0x%llx MAC:0x%llx\n",
 				     adapter->buffer_list_dma,
 				     adapter->filter_list_dma,
 				     rxq_desc.desc,
@@ -1378,13 +1378,13 @@
 	seq_printf(seq, "Firmware MAC:    %pM\n", firmware_mac);
 
 	seq_printf(seq, "\nAdapter Statistics:\n");
-	seq_printf(seq, "  TX:  vio_map_single failres:      %ld\n", adapter->tx_map_failed);
-	seq_printf(seq, "       send failures:               %ld\n", adapter->tx_send_failed);
-	seq_printf(seq, "  RX:  replenish task cycles:       %ld\n", adapter->replenish_task_cycles);
-	seq_printf(seq, "       alloc_skb_failures:          %ld\n", adapter->replenish_no_mem);
-	seq_printf(seq, "       add buffer failures:         %ld\n", adapter->replenish_add_buff_failure);
-	seq_printf(seq, "       invalid buffers:             %ld\n", adapter->rx_invalid_buffer);
-	seq_printf(seq, "       no buffers:                  %ld\n", adapter->rx_no_buffer);
+	seq_printf(seq, "  TX:  vio_map_single failres:      %lld\n", adapter->tx_map_failed);
+	seq_printf(seq, "       send failures:               %lld\n", adapter->tx_send_failed);
+	seq_printf(seq, "  RX:  replenish task cycles:       %lld\n", adapter->replenish_task_cycles);
+	seq_printf(seq, "       alloc_skb_failures:          %lld\n", adapter->replenish_no_mem);
+	seq_printf(seq, "       add buffer failures:         %lld\n", adapter->replenish_add_buff_failure);
+	seq_printf(seq, "       invalid buffers:             %lld\n", adapter->rx_invalid_buffer);
+	seq_printf(seq, "       no buffers:                  %lld\n", adapter->rx_no_buffer);
 
 	return 0;
 }
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index 29118f5..3a22dc4 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -1073,7 +1073,7 @@
 {
 	unsigned int i;
 	int ret;
-	char stir421x_fw_name[11];
+	char stir421x_fw_name[12];
 	const struct firmware *fw;
 	const unsigned char *fw_version_ptr; /* pointer to version string */
 	unsigned long fw_version = 0;
diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c
index c7457f9..cb793c2 100644
--- a/drivers/net/iseries_veth.c
+++ b/drivers/net/iseries_veth.c
@@ -429,7 +429,7 @@
 SIMPLE_PORT_ATTR(num_mcast);
 CUSTOM_PORT_ATTR(lpar_map, "0x%X\n", port->lpar_map);
 CUSTOM_PORT_ATTR(stopped_map, "0x%X\n", port->stopped_map);
-CUSTOM_PORT_ATTR(mac_addr, "0x%lX\n", port->mac_addr);
+CUSTOM_PORT_ATTR(mac_addr, "0x%llX\n", port->mac_addr);
 
 #define GET_PORT_ATTR(_name)	(&veth_port_attr_##_name.attr)
 static struct attribute *veth_port_default_attrs[] = {
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index acef3c6..d2f4d5f 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -318,6 +318,9 @@
 		rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
 		rxctrl |= IXGBE_DCA_RXCTRL_DESC_DCA_EN;
 		rxctrl |= IXGBE_DCA_RXCTRL_HEAD_DCA_EN;
+		rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_RRO_EN);
+		rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_WRO_EN |
+			    IXGBE_DCA_RXCTRL_DESC_HSRO_EN);
 		IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_RXCTRL(q), rxctrl);
 		rx_ring->cpu = cpu;
 	}
@@ -1741,38 +1744,6 @@
 	IXGBE_WRITE_REG(hw, IXGBE_RXCSUM, rxcsum);
 }
 
-static void ixgbe_vlan_rx_register(struct net_device *netdev,
-                                   struct vlan_group *grp)
-{
-	struct ixgbe_adapter *adapter = netdev_priv(netdev);
-	u32 ctrl;
-
-	if (!test_bit(__IXGBE_DOWN, &adapter->state))
-		ixgbe_irq_disable(adapter);
-	adapter->vlgrp = grp;
-
-	/*
-	 * For a DCB driver, always enable VLAN tag stripping so we can
-	 * still receive traffic from a DCB-enabled host even if we're
-	 * not in DCB mode.
-	 */
-	ctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_VLNCTRL);
-	ctrl |= IXGBE_VLNCTRL_VME;
-	ctrl &= ~IXGBE_VLNCTRL_CFIEN;
-	IXGBE_WRITE_REG(&adapter->hw, IXGBE_VLNCTRL, ctrl);
-
-	if (grp) {
-		/* enable VLAN tag insert/strip */
-		ctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_VLNCTRL);
-		ctrl |= IXGBE_VLNCTRL_VME;
-		ctrl &= ~IXGBE_VLNCTRL_CFIEN;
-		IXGBE_WRITE_REG(&adapter->hw, IXGBE_VLNCTRL, ctrl);
-	}
-
-	if (!test_bit(__IXGBE_DOWN, &adapter->state))
-		ixgbe_irq_enable(adapter);
-}
-
 static void ixgbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
@@ -1799,6 +1770,39 @@
 	hw->mac.ops.set_vfta(&adapter->hw, vid, 0, false);
 }
 
+static void ixgbe_vlan_rx_register(struct net_device *netdev,
+                                   struct vlan_group *grp)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	u32 ctrl;
+
+	if (!test_bit(__IXGBE_DOWN, &adapter->state))
+		ixgbe_irq_disable(adapter);
+	adapter->vlgrp = grp;
+
+	/*
+	 * For a DCB driver, always enable VLAN tag stripping so we can
+	 * still receive traffic from a DCB-enabled host even if we're
+	 * not in DCB mode.
+	 */
+	ctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_VLNCTRL);
+	ctrl |= IXGBE_VLNCTRL_VME;
+	ctrl &= ~IXGBE_VLNCTRL_CFIEN;
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_VLNCTRL, ctrl);
+	ixgbe_vlan_rx_add_vid(netdev, 0);
+
+	if (grp) {
+		/* enable VLAN tag insert/strip */
+		ctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_VLNCTRL);
+		ctrl |= IXGBE_VLNCTRL_VME;
+		ctrl &= ~IXGBE_VLNCTRL_CFIEN;
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_VLNCTRL, ctrl);
+	}
+
+	if (!test_bit(__IXGBE_DOWN, &adapter->state))
+		ixgbe_irq_enable(adapter);
+}
+
 static void ixgbe_restore_vlan(struct ixgbe_adapter *adapter)
 {
 	ixgbe_vlan_rx_register(adapter->netdev, adapter->vlgrp);
@@ -2074,6 +2078,9 @@
 
 	ixgbe_irq_enable(adapter);
 
+	/* enable transmits */
+	netif_tx_start_all_queues(netdev);
+
 	/* bring the link up in the watchdog, this could race with our first
 	 * link up interrupt but shouldn't be a problem */
 	adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;
@@ -3475,7 +3482,6 @@
 			        (FLOW_TX ? "TX" : "None"))));
 
 			netif_carrier_on(netdev);
-			netif_tx_wake_all_queues(netdev);
 		} else {
 			/* Force detection of hung controller */
 			adapter->detect_tx_hung = true;
@@ -3487,7 +3493,6 @@
 			printk(KERN_INFO "ixgbe: %s NIC Link is Down\n",
 			       netdev->name);
 			netif_carrier_off(netdev);
-			netif_tx_stop_all_queues(netdev);
 		}
 	}
 
@@ -4218,7 +4223,6 @@
 	}
 
 	netif_carrier_off(netdev);
-	netif_tx_stop_all_queues(netdev);
 
 	strcpy(netdev->name, "eth%d");
 	err = register_netdev(netdev);
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index 83a11ff..f011c57 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -404,6 +404,9 @@
 #define IXGBE_DCA_RXCTRL_DESC_DCA_EN (1 << 5) /* DCA Rx Desc enable */
 #define IXGBE_DCA_RXCTRL_HEAD_DCA_EN (1 << 6) /* DCA Rx Desc header enable */
 #define IXGBE_DCA_RXCTRL_DATA_DCA_EN (1 << 7) /* DCA Rx Desc payload enable */
+#define IXGBE_DCA_RXCTRL_DESC_RRO_EN (1 << 9) /* DCA Rx rd Desc Relax Order */
+#define IXGBE_DCA_RXCTRL_DESC_WRO_EN (1 << 13) /* DCA Rx wr Desc Relax Order */
+#define IXGBE_DCA_RXCTRL_DESC_HSRO_EN (1 << 15) /* DCA Rx Split Header RO */
 
 #define IXGBE_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */
 #define IXGBE_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */
diff --git a/drivers/net/korina.c b/drivers/net/korina.c
index 4a5580c..75010ca 100644
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -84,7 +84,10 @@
 #define KORINA_NUM_RDS	64  /* number of receive descriptors */
 #define KORINA_NUM_TDS	64  /* number of transmit descriptors */
 
-#define KORINA_RBSIZE	536 /* size of one resource buffer = Ether MTU */
+/* KORINA_RBSIZE is the hardware's default maximum receive
+ * frame size in bytes. Having this hardcoded means that there
+ * is no support for MTU sizes greater than 1500. */
+#define KORINA_RBSIZE	1536 /* size of one resource buffer = Ether MTU */
 #define KORINA_RDS_MASK	(KORINA_NUM_RDS - 1)
 #define KORINA_TDS_MASK	(KORINA_NUM_TDS - 1)
 #define RD_RING_SIZE 	(KORINA_NUM_RDS * sizeof(struct dma_desc))
@@ -196,7 +199,7 @@
 	struct korina_private *lp = netdev_priv(dev);
 	unsigned long flags;
 	u32 length;
-	u32 chain_index;
+	u32 chain_prev, chain_next;
 	struct dma_desc *td;
 
 	spin_lock_irqsave(&lp->lock, flags);
@@ -228,8 +231,8 @@
 	/* Setup the transmit descriptor. */
 	dma_cache_inv((u32) td, sizeof(*td));
 	td->ca = CPHYSADDR(skb->data);
-	chain_index = (lp->tx_chain_tail - 1) &
-			KORINA_TDS_MASK;
+	chain_prev = (lp->tx_chain_tail - 1) & KORINA_TDS_MASK;
+	chain_next = (lp->tx_chain_tail + 1) & KORINA_TDS_MASK;
 
 	if (readl(&(lp->tx_dma_regs->dmandptr)) == 0) {
 		if (lp->tx_chain_status == desc_empty) {
@@ -237,7 +240,7 @@
 			td->control = DMA_COUNT(length) |
 					DMA_DESC_COF | DMA_DESC_IOF;
 			/* Move tail */
-			lp->tx_chain_tail = chain_index;
+			lp->tx_chain_tail = chain_next;
 			/* Write to NDPTR */
 			writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]),
 					&lp->tx_dma_regs->dmandptr);
@@ -248,12 +251,12 @@
 			td->control = DMA_COUNT(length) |
 					DMA_DESC_COF | DMA_DESC_IOF;
 			/* Link to prev */
-			lp->td_ring[chain_index].control &=
+			lp->td_ring[chain_prev].control &=
 					~DMA_DESC_COF;
 			/* Link to prev */
-			lp->td_ring[chain_index].link =  CPHYSADDR(td);
+			lp->td_ring[chain_prev].link =  CPHYSADDR(td);
 			/* Move tail */
-			lp->tx_chain_tail = chain_index;
+			lp->tx_chain_tail = chain_next;
 			/* Write to NDPTR */
 			writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]),
 					&(lp->tx_dma_regs->dmandptr));
@@ -267,17 +270,16 @@
 			td->control = DMA_COUNT(length) |
 					DMA_DESC_COF | DMA_DESC_IOF;
 			/* Move tail */
-			lp->tx_chain_tail = chain_index;
+			lp->tx_chain_tail = chain_next;
 			lp->tx_chain_status = desc_filled;
-			netif_stop_queue(dev);
 		} else {
 			/* Update tail */
 			td->control = DMA_COUNT(length) |
 					DMA_DESC_COF | DMA_DESC_IOF;
-			lp->td_ring[chain_index].control &=
+			lp->td_ring[chain_prev].control &=
 					~DMA_DESC_COF;
-			lp->td_ring[chain_index].link =  CPHYSADDR(td);
-			lp->tx_chain_tail = chain_index;
+			lp->td_ring[chain_prev].link =  CPHYSADDR(td);
+			lp->tx_chain_tail = chain_next;
 		}
 	}
 	dma_cache_wback((u32) td, sizeof(*td));
@@ -327,13 +329,13 @@
 
 	dmas = readl(&lp->rx_dma_regs->dmas);
 	if (dmas & (DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR)) {
-		netif_rx_schedule_prep(&lp->napi);
-
 		dmasm = readl(&lp->rx_dma_regs->dmasm);
 		writel(dmasm | (DMA_STAT_DONE |
 				DMA_STAT_HALT | DMA_STAT_ERR),
 				&lp->rx_dma_regs->dmasm);
 
+		netif_rx_schedule(&lp->napi);
+
 		if (dmas & DMA_STAT_ERR)
 			printk(KERN_ERR DRV_NAME "%s: DMA error\n", dev->name);
 
@@ -350,15 +352,20 @@
 	struct dma_desc *rd = &lp->rd_ring[lp->rx_next_done];
 	struct sk_buff *skb, *skb_new;
 	u8 *pkt_buf;
-	u32 devcs, pkt_len, dmas, rx_free_desc;
+	u32 devcs, pkt_len, dmas;
 	int count;
 
 	dma_cache_inv((u32)rd, sizeof(*rd));
 
 	for (count = 0; count < limit; count++) {
+		skb = lp->rx_skb[lp->rx_next_done];
+		skb_new = NULL;
 
 		devcs = rd->devcs;
 
+		if ((KORINA_RBSIZE - (u32)DMA_COUNT(rd->control)) == 0)
+			break;
+
 		/* Update statistics counters */
 		if (devcs & ETH_RX_CRC)
 			dev->stats.rx_crc_errors++;
@@ -381,63 +388,58 @@
 			 * in Rc32434 (errata ref #077) */
 			dev->stats.rx_errors++;
 			dev->stats.rx_dropped++;
-		}
-
-		while ((rx_free_desc = KORINA_RBSIZE - (u32)DMA_COUNT(rd->control)) != 0) {
-			/* init the var. used for the later
-			 * operations within the while loop */
-			skb_new = NULL;
+		} else if ((devcs & ETH_RX_ROK)) {
 			pkt_len = RCVPKT_LENGTH(devcs);
-			skb = lp->rx_skb[lp->rx_next_done];
 
-			if ((devcs & ETH_RX_ROK)) {
-				/* must be the (first and) last
-				 * descriptor then */
-				pkt_buf = (u8 *)lp->rx_skb[lp->rx_next_done]->data;
+			/* must be the (first and) last
+			 * descriptor then */
+			pkt_buf = (u8 *)lp->rx_skb[lp->rx_next_done]->data;
 
-				/* invalidate the cache */
-				dma_cache_inv((unsigned long)pkt_buf, pkt_len - 4);
+			/* invalidate the cache */
+			dma_cache_inv((unsigned long)pkt_buf, pkt_len - 4);
 
-				/* Malloc up new buffer. */
-				skb_new = netdev_alloc_skb(dev, KORINA_RBSIZE + 2);
+			/* Malloc up new buffer. */
+			skb_new = netdev_alloc_skb(dev, KORINA_RBSIZE + 2);
 
-				if (!skb_new)
-					break;
-				/* Do not count the CRC */
-				skb_put(skb, pkt_len - 4);
-				skb->protocol = eth_type_trans(skb, dev);
+			if (!skb_new)
+				break;
+			/* Do not count the CRC */
+			skb_put(skb, pkt_len - 4);
+			skb->protocol = eth_type_trans(skb, dev);
 
-				/* Pass the packet to upper layers */
-				netif_receive_skb(skb);
-				dev->stats.rx_packets++;
-				dev->stats.rx_bytes += pkt_len;
+			/* Pass the packet to upper layers */
+			netif_receive_skb(skb);
+			dev->stats.rx_packets++;
+			dev->stats.rx_bytes += pkt_len;
 
-				/* Update the mcast stats */
-				if (devcs & ETH_RX_MP)
-					dev->stats.multicast++;
+			/* Update the mcast stats */
+			if (devcs & ETH_RX_MP)
+				dev->stats.multicast++;
 
-				lp->rx_skb[lp->rx_next_done] = skb_new;
-			}
+			/* 16 bit align */
+			skb_reserve(skb_new, 2);
 
-			rd->devcs = 0;
-
-			/* Restore descriptor's curr_addr */
-			if (skb_new)
-				rd->ca = CPHYSADDR(skb_new->data);
-			else
-				rd->ca = CPHYSADDR(skb->data);
-
-			rd->control = DMA_COUNT(KORINA_RBSIZE) |
-				DMA_DESC_COD | DMA_DESC_IOD;
-			lp->rd_ring[(lp->rx_next_done - 1) &
-				KORINA_RDS_MASK].control &=
-				~DMA_DESC_COD;
-
-			lp->rx_next_done = (lp->rx_next_done + 1) & KORINA_RDS_MASK;
-			dma_cache_wback((u32)rd, sizeof(*rd));
-			rd = &lp->rd_ring[lp->rx_next_done];
-			writel(~DMA_STAT_DONE, &lp->rx_dma_regs->dmas);
+			lp->rx_skb[lp->rx_next_done] = skb_new;
 		}
+
+		rd->devcs = 0;
+
+		/* Restore descriptor's curr_addr */
+		if (skb_new)
+			rd->ca = CPHYSADDR(skb_new->data);
+		else
+			rd->ca = CPHYSADDR(skb->data);
+
+		rd->control = DMA_COUNT(KORINA_RBSIZE) |
+			DMA_DESC_COD | DMA_DESC_IOD;
+		lp->rd_ring[(lp->rx_next_done - 1) &
+			KORINA_RDS_MASK].control &=
+			~DMA_DESC_COD;
+
+		lp->rx_next_done = (lp->rx_next_done + 1) & KORINA_RDS_MASK;
+		dma_cache_wback((u32)rd, sizeof(*rd));
+		rd = &lp->rd_ring[lp->rx_next_done];
+		writel(~DMA_STAT_DONE, &lp->rx_dma_regs->dmas);
 	}
 
 	dmas = readl(&lp->rx_dma_regs->dmas);
@@ -623,12 +625,12 @@
 	dmas = readl(&lp->tx_dma_regs->dmas);
 
 	if (dmas & (DMA_STAT_FINI | DMA_STAT_ERR)) {
-		korina_tx(dev);
-
 		dmasm = readl(&lp->tx_dma_regs->dmasm);
 		writel(dmasm | (DMA_STAT_FINI | DMA_STAT_ERR),
 				&lp->tx_dma_regs->dmasm);
 
+		korina_tx(dev);
+
 		if (lp->tx_chain_status == desc_filled &&
 			(readl(&(lp->tx_dma_regs->dmandptr)) == 0)) {
 			writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]),
@@ -741,6 +743,7 @@
 static void korina_alloc_ring(struct net_device *dev)
 {
 	struct korina_private *lp = netdev_priv(dev);
+	struct sk_buff *skb;
 	int i;
 
 	/* Initialize the transmit descriptors */
@@ -756,8 +759,6 @@
 
 	/* Initialize the receive descriptors */
 	for (i = 0; i < KORINA_NUM_RDS; i++) {
-		struct sk_buff *skb = lp->rx_skb[i];
-
 		skb = dev_alloc_skb(KORINA_RBSIZE + 2);
 		if (!skb)
 			break;
@@ -770,11 +771,12 @@
 		lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[i+1]);
 	}
 
-	/* loop back */
-	lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[0]);
-	lp->rx_next_done  = 0;
+	/* loop back receive descriptors, so the last
+	 * descriptor points to the first one */
+	lp->rd_ring[i - 1].link = CPHYSADDR(&lp->rd_ring[0]);
+	lp->rd_ring[i - 1].control |= DMA_DESC_COD;
 
-	lp->rd_ring[i].control |= DMA_DESC_COD;
+	lp->rx_next_done  = 0;
 	lp->rx_chain_head = 0;
 	lp->rx_chain_tail = 0;
 	lp->rx_chain_status = desc_empty;
@@ -901,6 +903,8 @@
 
 	korina_free_ring(dev);
 
+	napi_disable(&lp->napi);
+
 	ret = korina_init(dev);
 	if (ret < 0) {
 		printk(KERN_ERR DRV_NAME "%s: cannot restart device\n",
@@ -999,14 +1003,14 @@
 	 * that handles the Done Finished
 	 * Ovr and Und Events */
 	ret = request_irq(lp->rx_irq, &korina_rx_dma_interrupt,
-		IRQF_SHARED | IRQF_DISABLED, "Korina ethernet Rx", dev);
+			IRQF_DISABLED, "Korina ethernet Rx", dev);
 	if (ret < 0) {
 		printk(KERN_ERR DRV_NAME "%s: unable to get Rx DMA IRQ %d\n",
 		    dev->name, lp->rx_irq);
 		goto err_release;
 	}
 	ret = request_irq(lp->tx_irq, &korina_tx_dma_interrupt,
-		IRQF_SHARED | IRQF_DISABLED, "Korina ethernet Tx", dev);
+			IRQF_DISABLED, "Korina ethernet Tx", dev);
 	if (ret < 0) {
 		printk(KERN_ERR DRV_NAME "%s: unable to get Tx DMA IRQ %d\n",
 		    dev->name, lp->tx_irq);
@@ -1015,7 +1019,7 @@
 
 	/* Install handler for overrun error. */
 	ret = request_irq(lp->ovr_irq, &korina_ovr_interrupt,
-			IRQF_SHARED | IRQF_DISABLED, "Ethernet Overflow", dev);
+			IRQF_DISABLED, "Ethernet Overflow", dev);
 	if (ret < 0) {
 		printk(KERN_ERR DRV_NAME"%s: unable to get OVR IRQ %d\n",
 		    dev->name, lp->ovr_irq);
@@ -1024,7 +1028,7 @@
 
 	/* Install handler for underflow error. */
 	ret = request_irq(lp->und_irq, &korina_und_interrupt,
-			IRQF_SHARED | IRQF_DISABLED, "Ethernet Underflow", dev);
+			IRQF_DISABLED, "Ethernet Underflow", dev);
 	if (ret < 0) {
 		printk(KERN_ERR DRV_NAME "%s: unable to get UND IRQ %d\n",
 		    dev->name, lp->und_irq);
@@ -1067,6 +1071,8 @@
 
 	korina_free_ring(dev);
 
+	napi_disable(&lp->napi);
+
 	free_irq(lp->rx_irq, dev);
 	free_irq(lp->tx_irq, dev);
 	free_irq(lp->ovr_irq, dev);
@@ -1089,7 +1095,6 @@
 		return -ENOMEM;
 	}
 	SET_NETDEV_DEV(dev, &pdev->dev);
-	platform_set_drvdata(pdev, dev);
 	lp = netdev_priv(dev);
 
 	bif->dev = dev;
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index a04da4e..f6c4936 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -321,6 +321,10 @@
 		printk(KERN_ERR "%s: TX underrun, resetting buffers\n",
 			bp->dev->name);
 
+		/* Transfer ongoing, disable transmitter, to avoid confusion */
+		if (status & MACB_BIT(TGO))
+			macb_writel(bp, NCR, macb_readl(bp, NCR) & ~MACB_BIT(TE));
+
 		head = bp->tx_head;
 
 		/*Mark all the buffer as used to avoid sending a lost buffer*/
@@ -343,6 +347,10 @@
 		}
 
 		bp->tx_head = bp->tx_tail = 0;
+
+		/* Enable the transmitter again */
+		if (status & MACB_BIT(TGO))
+			macb_writel(bp, NCR, macb_readl(bp, NCR) | MACB_BIT(TE));
 	}
 
 	if (!(status & MACB_BIT(COMP)))
diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c
index 710c79e..6ef2490 100644
--- a/drivers/net/mlx4/main.c
+++ b/drivers/net/mlx4/main.c
@@ -912,8 +912,8 @@
 	int i;
 
 	if (msi_x) {
-		nreq = min(dev->caps.num_eqs - dev->caps.reserved_eqs,
-			   num_possible_cpus() + 1);
+		nreq = min_t(int, dev->caps.num_eqs - dev->caps.reserved_eqs,
+			     num_possible_cpus() + 1);
 		entries = kcalloc(nreq, sizeof *entries, GFP_KERNEL);
 		if (!entries)
 			goto no_msi;
diff --git a/drivers/net/mlx4/profile.c b/drivers/net/mlx4/profile.c
index 919fb9e..cebdf32 100644
--- a/drivers/net/mlx4/profile.c
+++ b/drivers/net/mlx4/profile.c
@@ -107,9 +107,9 @@
 	profile[MLX4_RES_AUXC].num    = request->num_qp;
 	profile[MLX4_RES_SRQ].num     = request->num_srq;
 	profile[MLX4_RES_CQ].num      = request->num_cq;
-	profile[MLX4_RES_EQ].num      = min(dev_cap->max_eqs,
-					    dev_cap->reserved_eqs +
-					    num_possible_cpus() + 1);
+	profile[MLX4_RES_EQ].num      = min_t(unsigned, dev_cap->max_eqs,
+					      dev_cap->reserved_eqs +
+					      num_possible_cpus() + 1);
 	profile[MLX4_RES_DMPT].num    = request->num_mpt;
 	profile[MLX4_RES_CMPT].num    = MLX4_NUM_CMPTS;
 	profile[MLX4_RES_MTT].num     = request->num_mtt;
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index 7253a49..5f31bbb 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -136,21 +136,23 @@
 /*
  * SDMA configuration register.
  */
+#define RX_BURST_SIZE_4_64BIT		(2 << 1)
 #define RX_BURST_SIZE_16_64BIT		(4 << 1)
 #define BLM_RX_NO_SWAP			(1 << 4)
 #define BLM_TX_NO_SWAP			(1 << 5)
+#define TX_BURST_SIZE_4_64BIT		(2 << 22)
 #define TX_BURST_SIZE_16_64BIT		(4 << 22)
 
 #if defined(__BIG_ENDIAN)
 #define PORT_SDMA_CONFIG_DEFAULT_VALUE		\
-		(RX_BURST_SIZE_16_64BIT	|	\
-		TX_BURST_SIZE_16_64BIT)
+		(RX_BURST_SIZE_4_64BIT	|	\
+		 TX_BURST_SIZE_4_64BIT)
 #elif defined(__LITTLE_ENDIAN)
 #define PORT_SDMA_CONFIG_DEFAULT_VALUE		\
-		(RX_BURST_SIZE_16_64BIT	|	\
-		BLM_RX_NO_SWAP		|	\
-		BLM_TX_NO_SWAP		|	\
-		TX_BURST_SIZE_16_64BIT)
+		(RX_BURST_SIZE_4_64BIT	|	\
+		 BLM_RX_NO_SWAP		|	\
+		 BLM_TX_NO_SWAP		|	\
+		 TX_BURST_SIZE_4_64BIT)
 #else
 #error One of __BIG_ENDIAN or __LITTLE_ENDIAN must be defined
 #endif
@@ -1594,7 +1596,7 @@
 			entry = addr_crc(a);
 		}
 
-		table[entry >> 2] |= 1 << (entry & 3);
+		table[entry >> 2] |= 1 << (8 * (entry & 3));
 	}
 
 	for (i = 0; i < 0x100; i += 4) {
@@ -2210,6 +2212,7 @@
 	struct mv643xx_eth_private *mp = netdev_priv(dev);
 	int i;
 
+	wrlp(mp, INT_MASK_EXT, 0x00000000);
 	wrlp(mp, INT_MASK, 0x00000000);
 	rdlp(mp, INT_MASK);
 
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 6bb71b6..e9c1296b 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -1,7 +1,7 @@
 /*************************************************************************
  * myri10ge.c: Myricom Myri-10G Ethernet driver.
  *
- * Copyright (C) 2005 - 2007 Myricom, Inc.
+ * Copyright (C) 2005 - 2009 Myricom, Inc.
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -75,7 +75,7 @@
 #include "myri10ge_mcp.h"
 #include "myri10ge_mcp_gen_header.h"
 
-#define MYRI10GE_VERSION_STR "1.4.4-1.398"
+#define MYRI10GE_VERSION_STR "1.4.4-1.401"
 
 MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
 MODULE_AUTHOR("Maintainer: help@myri.com");
@@ -3786,7 +3786,7 @@
 	if (status != 0) {
 		dev_err(&pdev->dev, "Error %d writing PCI_EXP_DEVCTL\n",
 			status);
-		goto abort_with_netdev;
+		goto abort_with_enabled;
 	}
 
 	pci_set_master(pdev);
@@ -3801,13 +3801,13 @@
 	}
 	if (status != 0) {
 		dev_err(&pdev->dev, "Error %d setting DMA mask\n", status);
-		goto abort_with_netdev;
+		goto abort_with_enabled;
 	}
 	(void)pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
 	mgp->cmd = dma_alloc_coherent(&pdev->dev, sizeof(*mgp->cmd),
 				      &mgp->cmd_bus, GFP_KERNEL);
 	if (mgp->cmd == NULL)
-		goto abort_with_netdev;
+		goto abort_with_enabled;
 
 	mgp->board_span = pci_resource_len(pdev, 0);
 	mgp->iomem_base = pci_resource_start(pdev, 0);
@@ -3943,8 +3943,10 @@
 	dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
 			  mgp->cmd, mgp->cmd_bus);
 
-abort_with_netdev:
+abort_with_enabled:
+	pci_disable_device(pdev);
 
+abort_with_netdev:
 	free_netdev(netdev);
 	return status;
 }
@@ -3990,6 +3992,7 @@
 			  mgp->cmd, mgp->cmd_bus);
 
 	free_netdev(netdev);
+	pci_disable_device(pdev);
 	pci_set_drvdata(pdev, NULL);
 }
 
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index f8e601c..a75a310 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -146,7 +146,7 @@
 
 #define MAX_RX_BUFFER_LENGTH		1760
 #define MAX_RX_JUMBO_BUFFER_LENGTH 	8062
-#define MAX_RX_LRO_BUFFER_LENGTH	((48*1024)-512)
+#define MAX_RX_LRO_BUFFER_LENGTH	(8062)
 #define RX_DMA_MAP_LEN			(MAX_RX_BUFFER_LENGTH - 2)
 #define RX_JUMBO_DMA_MAP_LEN	\
 	(MAX_RX_JUMBO_BUFFER_LENGTH - 2)
@@ -207,11 +207,11 @@
 
 #define MAX_CMD_DESCRIPTORS		4096
 #define MAX_RCV_DESCRIPTORS		16384
-#define MAX_CMD_DESCRIPTORS_HOST	(MAX_CMD_DESCRIPTORS / 4)
-#define MAX_RCV_DESCRIPTORS_1G		(MAX_RCV_DESCRIPTORS / 4)
-#define MAX_RCV_DESCRIPTORS_10G		8192
-#define MAX_JUMBO_RCV_DESCRIPTORS	1024
-#define MAX_LRO_RCV_DESCRIPTORS		64
+#define MAX_CMD_DESCRIPTORS_HOST	1024
+#define MAX_RCV_DESCRIPTORS_1G		2048
+#define MAX_RCV_DESCRIPTORS_10G		4096
+#define MAX_JUMBO_RCV_DESCRIPTORS	512
+#define MAX_LRO_RCV_DESCRIPTORS		8
 #define MAX_RCVSTATUS_DESCRIPTORS	MAX_RCV_DESCRIPTORS
 #define MAX_JUMBO_RCV_DESC	MAX_JUMBO_RCV_DESCRIPTORS
 #define MAX_RCV_DESC		MAX_RCV_DESCRIPTORS
@@ -308,27 +308,16 @@
 #define netxen_set_cmd_desc_ctxid(cmd_desc, var)	\
 	((cmd_desc)->port_ctxid |= ((var) << 4 & 0xF0))
 
-#define netxen_set_cmd_desc_flags(cmd_desc, val)	\
-	(cmd_desc)->flags_opcode = ((cmd_desc)->flags_opcode & \
-		~cpu_to_le16(0x7f)) | cpu_to_le16((val) & 0x7f)
-#define netxen_set_cmd_desc_opcode(cmd_desc, val)	\
-	(cmd_desc)->flags_opcode = ((cmd_desc)->flags_opcode & \
-		~cpu_to_le16((u16)0x3f << 7)) | cpu_to_le16(((val) & 0x3f) << 7)
+#define netxen_set_tx_port(_desc, _port) \
+	(_desc)->port_ctxid = ((_port) & 0xf) | (((_port) << 4) & 0xf0)
 
-#define netxen_set_cmd_desc_num_of_buff(cmd_desc, val)	\
-	(cmd_desc)->num_of_buffers_total_length = \
-		((cmd_desc)->num_of_buffers_total_length & \
-		~cpu_to_le32(0xff)) | cpu_to_le32((val) & 0xff)
-#define netxen_set_cmd_desc_totallength(cmd_desc, val)	\
-	(cmd_desc)->num_of_buffers_total_length = \
-		((cmd_desc)->num_of_buffers_total_length & \
-		~cpu_to_le32((u32)0xffffff << 8)) | \
-		cpu_to_le32(((val) & 0xffffff) << 8)
+#define netxen_set_tx_flags_opcode(_desc, _flags, _opcode) \
+	(_desc)->flags_opcode = \
+	cpu_to_le16(((_flags) & 0x7f) | (((_opcode) & 0x3f) << 7))
 
-#define netxen_get_cmd_desc_opcode(cmd_desc)	\
-	((le16_to_cpu((cmd_desc)->flags_opcode) >> 7) & 0x003f)
-#define netxen_get_cmd_desc_totallength(cmd_desc)	\
-	((le32_to_cpu((cmd_desc)->num_of_buffers_total_length) >> 8) & 0xffffff)
+#define netxen_set_tx_frags_len(_desc, _frags, _len) \
+	(_desc)->num_of_buffers_total_length = \
+	cpu_to_le32(((_frags) & 0xff) | (((_len) & 0xffffff) << 8))
 
 struct cmd_desc_type0 {
 	u8 tcp_hdr_offset;	/* For LSO only */
@@ -510,7 +499,8 @@
 	NETXEN_BRDTYPE_P3_10G_SFP_CT = 0x002a,
 	NETXEN_BRDTYPE_P3_10G_SFP_QT = 0x002b,
 	NETXEN_BRDTYPE_P3_10G_CX4 = 0x0031,
-	NETXEN_BRDTYPE_P3_10G_XFP = 0x0032
+	NETXEN_BRDTYPE_P3_10G_XFP = 0x0032,
+	NETXEN_BRDTYPE_P3_10G_TP = 0x0080
 
 } netxen_brdtype_t;
 
@@ -757,7 +747,7 @@
  */
 struct netxen_skb_frag {
 	u64 dma;
-	u32 length;
+	ulong length;
 };
 
 #define _netxen_set_bits(config_word, start, bits, val)	{\
@@ -783,13 +773,7 @@
 struct netxen_cmd_buffer {
 	struct sk_buff *skb;
 	struct netxen_skb_frag frag_array[MAX_BUFFERS_PER_CMD + 1];
-	u32 total_length;
-	u32 mss;
-	u16 port;
-	u8 cmd;
-	u8 frag_count;
-	unsigned long time_stamp;
-	u32 state;
+	u32 frag_count;
 };
 
 /* In rx_buffer, we do not need multiple fragments as is a single buffer */
@@ -876,7 +860,6 @@
 	u32 skb_size;
 	struct netxen_rx_buffer *rx_buf_arr;	/* rx buffers for receive   */
 	struct list_head free_list;
-	int begin_alloc;
 };
 
 /*
@@ -995,31 +978,31 @@
  */
 
 typedef struct {
-	u64 host_phys_addr;	/* Ring base addr */
-	u32 ring_size;		/* Ring entries */
-	u16 msi_index;
-	u16 rsvd;		/* Padding */
+	__le64 host_phys_addr;	/* Ring base addr */
+	__le32 ring_size;		/* Ring entries */
+	__le16 msi_index;
+	__le16 rsvd;		/* Padding */
 } nx_hostrq_sds_ring_t;
 
 typedef struct {
-	u64 host_phys_addr;	/* Ring base addr */
-	u64 buff_size;		/* Packet buffer size */
-	u32 ring_size;		/* Ring entries */
-	u32 ring_kind;		/* Class of ring */
+	__le64 host_phys_addr;	/* Ring base addr */
+	__le64 buff_size;		/* Packet buffer size */
+	__le32 ring_size;		/* Ring entries */
+	__le32 ring_kind;		/* Class of ring */
 } nx_hostrq_rds_ring_t;
 
 typedef struct {
-	u64 host_rsp_dma_addr;	/* Response dma'd here */
-	u32 capabilities[4];	/* Flag bit vector */
-	u32 host_int_crb_mode;	/* Interrupt crb usage */
-	u32 host_rds_crb_mode;	/* RDS crb usage */
+	__le64 host_rsp_dma_addr;	/* Response dma'd here */
+	__le32 capabilities[4];	/* Flag bit vector */
+	__le32 host_int_crb_mode;	/* Interrupt crb usage */
+	__le32 host_rds_crb_mode;	/* RDS crb usage */
 	/* These ring offsets are relative to data[0] below */
-	u32 rds_ring_offset;	/* Offset to RDS config */
-	u32 sds_ring_offset;	/* Offset to SDS config */
-	u16 num_rds_rings;	/* Count of RDS rings */
-	u16 num_sds_rings;	/* Count of SDS rings */
-	u16 rsvd1;		/* Padding */
-	u16 rsvd2;		/* Padding */
+	__le32 rds_ring_offset;	/* Offset to RDS config */
+	__le32 sds_ring_offset;	/* Offset to SDS config */
+	__le16 num_rds_rings;	/* Count of RDS rings */
+	__le16 num_sds_rings;	/* Count of SDS rings */
+	__le16 rsvd1;		/* Padding */
+	__le16 rsvd2;		/* Padding */
 	u8  reserved[128]; 	/* reserve space for future expansion*/
 	/* MUST BE 64-bit aligned.
 	   The following is packed:
@@ -1029,24 +1012,24 @@
 } nx_hostrq_rx_ctx_t;
 
 typedef struct {
-	u32 host_producer_crb;	/* Crb to use */
-	u32 rsvd1;		/* Padding */
+	__le32 host_producer_crb;	/* Crb to use */
+	__le32 rsvd1;		/* Padding */
 } nx_cardrsp_rds_ring_t;
 
 typedef struct {
-	u32 host_consumer_crb;	/* Crb to use */
-	u32 interrupt_crb;	/* Crb to use */
+	__le32 host_consumer_crb;	/* Crb to use */
+	__le32 interrupt_crb;	/* Crb to use */
 } nx_cardrsp_sds_ring_t;
 
 typedef struct {
 	/* These ring offsets are relative to data[0] below */
-	u32 rds_ring_offset;	/* Offset to RDS config */
-	u32 sds_ring_offset;	/* Offset to SDS config */
-	u32 host_ctx_state;	/* Starting State */
-	u32 num_fn_per_port;	/* How many PCI fn share the port */
-	u16 num_rds_rings;	/* Count of RDS rings */
-	u16 num_sds_rings;	/* Count of SDS rings */
-	u16 context_id;		/* Handle for context */
+	__le32 rds_ring_offset;	/* Offset to RDS config */
+	__le32 sds_ring_offset;	/* Offset to SDS config */
+	__le32 host_ctx_state;	/* Starting State */
+	__le32 num_fn_per_port;	/* How many PCI fn share the port */
+	__le16 num_rds_rings;	/* Count of RDS rings */
+	__le16 num_sds_rings;	/* Count of SDS rings */
+	__le16 context_id;		/* Handle for context */
 	u8  phys_port;		/* Physical id of port */
 	u8  virt_port;		/* Virtual/Logical id of port */
 	u8  reserved[128];	/* save space for future expansion */
@@ -1072,34 +1055,34 @@
  */
 
 typedef struct {
-	u64 host_phys_addr;	/* Ring base addr */
-	u32 ring_size;		/* Ring entries */
-	u32 rsvd;		/* Padding */
+	__le64 host_phys_addr;	/* Ring base addr */
+	__le32 ring_size;		/* Ring entries */
+	__le32 rsvd;		/* Padding */
 } nx_hostrq_cds_ring_t;
 
 typedef struct {
-	u64 host_rsp_dma_addr;	/* Response dma'd here */
-	u64 cmd_cons_dma_addr;	/*  */
-	u64 dummy_dma_addr;	/*  */
-	u32 capabilities[4];	/* Flag bit vector */
-	u32 host_int_crb_mode;	/* Interrupt crb usage */
-	u32 rsvd1;		/* Padding */
-	u16 rsvd2;		/* Padding */
-	u16 interrupt_ctl;
-	u16 msi_index;
-	u16 rsvd3;		/* Padding */
+	__le64 host_rsp_dma_addr;	/* Response dma'd here */
+	__le64 cmd_cons_dma_addr;	/*  */
+	__le64 dummy_dma_addr;	/*  */
+	__le32 capabilities[4];	/* Flag bit vector */
+	__le32 host_int_crb_mode;	/* Interrupt crb usage */
+	__le32 rsvd1;		/* Padding */
+	__le16 rsvd2;		/* Padding */
+	__le16 interrupt_ctl;
+	__le16 msi_index;
+	__le16 rsvd3;		/* Padding */
 	nx_hostrq_cds_ring_t cds_ring;	/* Desc of cds ring */
 	u8  reserved[128];	/* future expansion */
 } nx_hostrq_tx_ctx_t;
 
 typedef struct {
-	u32 host_producer_crb;	/* Crb to use */
-	u32 interrupt_crb;	/* Crb to use */
+	__le32 host_producer_crb;	/* Crb to use */
+	__le32 interrupt_crb;	/* Crb to use */
 } nx_cardrsp_cds_ring_t;
 
 typedef struct {
-	u32 host_ctx_state;	/* Starting state */
-	u16 context_id;		/* Handle for context */
+	__le32 host_ctx_state;	/* Starting state */
+	__le16 context_id;		/* Handle for context */
 	u8  phys_port;		/* Physical id of port */
 	u8  virt_port;		/* Virtual/Logical id of port */
 	nx_cardrsp_cds_ring_t cds_ring;	/* Card cds settings */
@@ -1202,9 +1185,9 @@
 #define VPORT_MISS_MODE_ACCEPT_MULTI	2 /* accept unmatched multicast */
 
 typedef struct {
-	u64 qhdr;
-	u64 req_hdr;
-	u64 words[6];
+	__le64 qhdr;
+	__le64 req_hdr;
+	__le64 words[6];
 } nx_nic_req_t;
 
 typedef struct {
@@ -1486,8 +1469,6 @@
 
 void netxen_initialize_adapter_ops(struct netxen_adapter *adapter);
 int netxen_init_firmware(struct netxen_adapter *adapter);
-void netxen_tso_check(struct netxen_adapter *adapter,
-		      struct cmd_desc_type0 *desc, struct sk_buff *skb);
 void netxen_nic_clear_stats(struct netxen_adapter *adapter);
 void netxen_watchdog_task(struct work_struct *work);
 void netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ctx,
@@ -1496,6 +1477,7 @@
 u32 netxen_process_rcv_ring(struct netxen_adapter *adapter, int ctx, int max);
 void netxen_p2_nic_set_multi(struct net_device *netdev);
 void netxen_p3_nic_set_multi(struct net_device *netdev);
+void netxen_p3_free_mac_list(struct netxen_adapter *adapter);
 int netxen_p3_nic_set_promisc(struct netxen_adapter *adapter, u32);
 int netxen_config_intr_coalesce(struct netxen_adapter *adapter);
 
diff --git a/drivers/net/netxen/netxen_nic_ctx.c b/drivers/net/netxen/netxen_nic_ctx.c
index 64b5164..746bdb4 100644
--- a/drivers/net/netxen/netxen_nic_ctx.c
+++ b/drivers/net/netxen/netxen_nic_ctx.c
@@ -76,7 +76,7 @@
 static u32
 netxen_poll_rsp(struct netxen_adapter *adapter)
 {
-	u32 raw_rsp, rsp = NX_CDRP_RSP_OK;
+	u32 rsp = NX_CDRP_RSP_OK;
 	int	timeout = 0;
 
 	do {
@@ -86,10 +86,7 @@
 		if (++timeout > NX_OS_CRB_RETRY_COUNT)
 			return NX_CDRP_RSP_TIMEOUT;
 
-		netxen_nic_read_w1(adapter, NX_CDRP_CRB_OFFSET,
-				&raw_rsp);
-
-		rsp = le32_to_cpu(raw_rsp);
+		netxen_nic_read_w1(adapter, NX_CDRP_CRB_OFFSET, &rsp);
 	} while (!NX_CDRP_IS_RSP(rsp));
 
 	return rsp;
@@ -109,20 +106,16 @@
 	if (netxen_api_lock(adapter))
 		return NX_RCODE_TIMEOUT;
 
-	netxen_nic_write_w1(adapter, NX_SIGN_CRB_OFFSET,
-			cpu_to_le32(signature));
+	netxen_nic_write_w1(adapter, NX_SIGN_CRB_OFFSET, signature);
 
-	netxen_nic_write_w1(adapter, NX_ARG1_CRB_OFFSET,
-			cpu_to_le32(arg1));
+	netxen_nic_write_w1(adapter, NX_ARG1_CRB_OFFSET, arg1);
 
-	netxen_nic_write_w1(adapter, NX_ARG2_CRB_OFFSET,
-			cpu_to_le32(arg2));
+	netxen_nic_write_w1(adapter, NX_ARG2_CRB_OFFSET, arg2);
 
-	netxen_nic_write_w1(adapter, NX_ARG3_CRB_OFFSET,
-			cpu_to_le32(arg3));
+	netxen_nic_write_w1(adapter, NX_ARG3_CRB_OFFSET, arg3);
 
 	netxen_nic_write_w1(adapter, NX_CDRP_CRB_OFFSET,
-			cpu_to_le32(NX_CDRP_FORM_CMD(cmd)));
+			NX_CDRP_FORM_CMD(cmd));
 
 	rsp = netxen_poll_rsp(adapter);
 
@@ -133,7 +126,6 @@
 		rcode = NX_RCODE_TIMEOUT;
 	} else if (rsp == NX_CDRP_RSP_FAIL) {
 		netxen_nic_read_w1(adapter, NX_ARG1_CRB_OFFSET, &rcode);
-		rcode = le32_to_cpu(rcode);
 
 		printk(KERN_ERR "%s: failed card response code:0x%x\n",
 				netxen_nic_driver_name, rcode);
@@ -183,7 +175,7 @@
 
 	int i, nrds_rings, nsds_rings;
 	size_t rq_size, rsp_size;
-	u32 cap, reg;
+	u32 cap, reg, val;
 
 	int err;
 
@@ -225,11 +217,14 @@
 
 	prq->num_rds_rings = cpu_to_le16(nrds_rings);
 	prq->num_sds_rings = cpu_to_le16(nsds_rings);
-	prq->rds_ring_offset = 0;
-	prq->sds_ring_offset = prq->rds_ring_offset +
-		(sizeof(nx_hostrq_rds_ring_t) * nrds_rings);
+	prq->rds_ring_offset = cpu_to_le32(0);
 
-	prq_rds = (nx_hostrq_rds_ring_t *)(prq->data + prq->rds_ring_offset);
+	val = le32_to_cpu(prq->rds_ring_offset) +
+		(sizeof(nx_hostrq_rds_ring_t) * nrds_rings);
+	prq->sds_ring_offset = cpu_to_le32(val);
+
+	prq_rds = (nx_hostrq_rds_ring_t *)(prq->data +
+			le32_to_cpu(prq->rds_ring_offset));
 
 	for (i = 0; i < nrds_rings; i++) {
 
@@ -241,17 +236,14 @@
 		prq_rds[i].buff_size = cpu_to_le64(rds_ring->dma_size);
 	}
 
-	prq_sds = (nx_hostrq_sds_ring_t *)(prq->data + prq->sds_ring_offset);
+	prq_sds = (nx_hostrq_sds_ring_t *)(prq->data +
+			le32_to_cpu(prq->sds_ring_offset));
 
 	prq_sds[0].host_phys_addr =
 		cpu_to_le64(recv_ctx->rcv_status_desc_phys_addr);
 	prq_sds[0].ring_size = cpu_to_le32(adapter->max_rx_desc_count);
 	/* only one msix vector for now */
-	prq_sds[0].msi_index = cpu_to_le32(0);
-
-	/* now byteswap offsets */
-	prq->rds_ring_offset = cpu_to_le32(prq->rds_ring_offset);
-	prq->sds_ring_offset = cpu_to_le32(prq->sds_ring_offset);
+	prq_sds[0].msi_index = cpu_to_le16(0);
 
 	phys_addr = hostrq_phys_addr;
 	err = netxen_issue_cmd(adapter,
@@ -269,9 +261,9 @@
 
 
 	prsp_rds = ((nx_cardrsp_rds_ring_t *)
-			 &prsp->data[prsp->rds_ring_offset]);
+			 &prsp->data[le32_to_cpu(prsp->rds_ring_offset)]);
 
-	for (i = 0; i < le32_to_cpu(prsp->num_rds_rings); i++) {
+	for (i = 0; i < le16_to_cpu(prsp->num_rds_rings); i++) {
 		rds_ring = &recv_ctx->rds_rings[i];
 
 		reg = le32_to_cpu(prsp_rds[i].host_producer_crb);
@@ -279,7 +271,7 @@
 	}
 
 	prsp_sds = ((nx_cardrsp_sds_ring_t *)
-			&prsp->data[prsp->sds_ring_offset]);
+			&prsp->data[le32_to_cpu(prsp->sds_ring_offset)]);
 	reg = le32_to_cpu(prsp_sds[0].host_consumer_crb);
 	recv_ctx->crb_sts_consumer = NETXEN_NIC_REG(reg - 0x200);
 
@@ -288,7 +280,7 @@
 
 	recv_ctx->state = le32_to_cpu(prsp->host_ctx_state);
 	recv_ctx->context_id = le16_to_cpu(prsp->context_id);
-	recv_ctx->virt_port = le16_to_cpu(prsp->virt_port);
+	recv_ctx->virt_port = prsp->virt_port;
 
 out_free_rsp:
 	pci_free_consistent(adapter->pdev, rsp_size, prsp, cardrsp_phys_addr);
diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c
index e45ce29..0894a7b 100644
--- a/drivers/net/netxen/netxen_nic_ethtool.c
+++ b/drivers/net/netxen/netxen_nic_ethtool.c
@@ -136,11 +136,9 @@
 
 		ecmd->port = PORT_TP;
 
-		if (netif_running(dev)) {
-			ecmd->speed = adapter->link_speed;
-			ecmd->duplex = adapter->link_duplex;
-			ecmd->autoneg = adapter->link_autoneg;
-		}
+		ecmd->speed = adapter->link_speed;
+		ecmd->duplex = adapter->link_duplex;
+		ecmd->autoneg = adapter->link_autoneg;
 
 	} else if (adapter->ahw.board_type == NETXEN_NIC_XGBE) {
 		u32 val;
@@ -171,7 +169,7 @@
 	} else
 		return -EIO;
 
-	ecmd->phy_address = adapter->portnum;
+	ecmd->phy_address = adapter->physical_port;
 	ecmd->transceiver = XCVR_EXTERNAL;
 
 	switch ((netxen_brdtype_t) boardinfo->board_type) {
@@ -180,13 +178,13 @@
 	case NETXEN_BRDTYPE_P3_REF_QG:
 	case NETXEN_BRDTYPE_P3_4_GB:
 	case NETXEN_BRDTYPE_P3_4_GB_MM:
-	case NETXEN_BRDTYPE_P3_10000_BASE_T:
 
 		ecmd->supported |= SUPPORTED_Autoneg;
 		ecmd->advertising |= ADVERTISED_Autoneg;
 	case NETXEN_BRDTYPE_P2_SB31_10G_CX4:
 	case NETXEN_BRDTYPE_P3_10G_CX4:
 	case NETXEN_BRDTYPE_P3_10G_CX4_LP:
+	case NETXEN_BRDTYPE_P3_10000_BASE_T:
 		ecmd->supported |= SUPPORTED_TP;
 		ecmd->advertising |= ADVERTISED_TP;
 		ecmd->port = PORT_TP;
@@ -204,16 +202,33 @@
 		ecmd->port = PORT_FIBRE;
 		ecmd->autoneg = AUTONEG_DISABLE;
 		break;
-	case NETXEN_BRDTYPE_P2_SB31_10G:
 	case NETXEN_BRDTYPE_P3_10G_SFP_PLUS:
 	case NETXEN_BRDTYPE_P3_10G_SFP_CT:
 	case NETXEN_BRDTYPE_P3_10G_SFP_QT:
+		ecmd->advertising |= ADVERTISED_TP;
+		ecmd->supported |= SUPPORTED_TP;
+	case NETXEN_BRDTYPE_P2_SB31_10G:
 	case NETXEN_BRDTYPE_P3_10G_XFP:
 		ecmd->supported |= SUPPORTED_FIBRE;
 		ecmd->advertising |= ADVERTISED_FIBRE;
 		ecmd->port = PORT_FIBRE;
 		ecmd->autoneg = AUTONEG_DISABLE;
 		break;
+	case NETXEN_BRDTYPE_P3_10G_TP:
+		if (adapter->ahw.board_type == NETXEN_NIC_XGBE) {
+			ecmd->autoneg = AUTONEG_DISABLE;
+			ecmd->supported |= (SUPPORTED_FIBRE | SUPPORTED_TP);
+			ecmd->advertising |=
+				(ADVERTISED_FIBRE | ADVERTISED_TP);
+			ecmd->port = PORT_FIBRE;
+		} else {
+			ecmd->autoneg = AUTONEG_ENABLE;
+			ecmd->supported |= (SUPPORTED_TP |SUPPORTED_Autoneg);
+			ecmd->advertising |=
+				(ADVERTISED_TP | ADVERTISED_Autoneg);
+			ecmd->port = PORT_TP;
+		}
+		break;
 	default:
 		printk(KERN_ERR "netxen-nic: Unsupported board model %d\n",
 		       (netxen_brdtype_t) boardinfo->board_type);
@@ -546,7 +561,10 @@
 	}
 	ring->tx_pending = adapter->max_tx_desc_count;
 
-	ring->rx_max_pending = MAX_RCV_DESCRIPTORS;
+	if (adapter->ahw.board_type == NETXEN_NIC_GBE)
+		ring->rx_max_pending = MAX_RCV_DESCRIPTORS_1G;
+	else
+		ring->rx_max_pending = MAX_RCV_DESCRIPTORS_10G;
 	ring->tx_max_pending = MAX_CMD_DESCRIPTORS_HOST;
 	ring->rx_jumbo_max_pending = MAX_JUMBO_RCV_DESCRIPTORS;
 	ring->rx_mini_max_pending = 0;
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index aa6e603..821cff6 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -503,17 +503,15 @@
 
 	i = 0;
 
+	netif_tx_lock_bh(adapter->netdev);
+
 	producer = adapter->cmd_producer;
 	do {
 		cmd_desc = &cmd_desc_arr[i];
 
 		pbuf = &adapter->cmd_buf_arr[producer];
-		pbuf->mss = 0;
-		pbuf->total_length = 0;
 		pbuf->skb = NULL;
-		pbuf->cmd = 0;
 		pbuf->frag_count = 0;
-		pbuf->port = 0;
 
 		/* adapter->ahw.cmd_desc_head[producer] = *cmd_desc; */
 		memcpy(&adapter->ahw.cmd_desc_head[producer],
@@ -531,6 +529,8 @@
 
 	netxen_nic_update_cmd_producer(adapter, adapter->cmd_producer);
 
+	netif_tx_unlock_bh(adapter->netdev);
+
 	return 0;
 }
 
@@ -539,16 +539,19 @@
 {
 	struct netxen_adapter *adapter = netdev_priv(dev);
 	nx_nic_req_t req;
-	nx_mac_req_t mac_req;
+	nx_mac_req_t *mac_req;
+	u64 word;
 	int rv;
 
 	memset(&req, 0, sizeof(nx_nic_req_t));
-	req.qhdr |= (NX_NIC_REQUEST << 23);
-	req.req_hdr |= NX_MAC_EVENT;
-	req.req_hdr |= ((u64)adapter->portnum << 16);
-	mac_req.op = op;
-	memcpy(&mac_req.mac_addr, addr, 6);
-	req.words[0] = cpu_to_le64(*(u64 *)&mac_req);
+	req.qhdr = cpu_to_le64(NX_NIC_REQUEST << 23);
+
+	word = NX_MAC_EVENT | ((u64)adapter->portnum << 16);
+	req.req_hdr = cpu_to_le64(word);
+
+	mac_req = (nx_mac_req_t *)&req.words[0];
+	mac_req->op = op;
+	memcpy(mac_req->mac_addr, addr, 6);
 
 	rv = netxen_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
 	if (rv != 0) {
@@ -612,18 +615,35 @@
 int netxen_p3_nic_set_promisc(struct netxen_adapter *adapter, u32 mode)
 {
 	nx_nic_req_t req;
+	u64 word;
 
 	memset(&req, 0, sizeof(nx_nic_req_t));
 
-	req.qhdr |= (NX_HOST_REQUEST << 23);
-	req.req_hdr |= NX_NIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE;
-	req.req_hdr |= ((u64)adapter->portnum << 16);
+	req.qhdr = cpu_to_le64(NX_HOST_REQUEST << 23);
+
+	word = NX_NIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE |
+			((u64)adapter->portnum << 16);
+	req.req_hdr = cpu_to_le64(word);
+
 	req.words[0] = cpu_to_le64(mode);
 
 	return netxen_send_cmd_descs(adapter,
 				(struct cmd_desc_type0 *)&req, 1);
 }
 
+void netxen_p3_free_mac_list(struct netxen_adapter *adapter)
+{
+	nx_mac_list_t *cur, *next;
+
+	cur = adapter->mac_list;
+
+	while (cur) {
+		next = cur->next;
+		kfree(cur);
+		cur = next;
+	}
+}
+
 #define	NETXEN_CONFIG_INTR_COALESCE	3
 
 /*
@@ -632,13 +652,15 @@
 int netxen_config_intr_coalesce(struct netxen_adapter *adapter)
 {
 	nx_nic_req_t req;
+	u64 word;
 	int rv;
 
 	memset(&req, 0, sizeof(nx_nic_req_t));
 
-	req.qhdr |= (NX_NIC_REQUEST << 23);
-	req.req_hdr |= NETXEN_CONFIG_INTR_COALESCE;
-	req.req_hdr |= ((u64)adapter->portnum << 16);
+	req.qhdr = cpu_to_le64(NX_NIC_REQUEST << 23);
+
+	word = NETXEN_CONFIG_INTR_COALESCE | ((u64)adapter->portnum << 16);
+	req.req_hdr = cpu_to_le64(word);
 
 	memcpy(&req.words[0], &adapter->coal, sizeof(adapter->coal));
 
@@ -772,13 +794,10 @@
 	adapter->hw_read_wx(adapter, crbaddr, &mac_lo, 4);
 	adapter->hw_read_wx(adapter, crbaddr+4, &mac_hi, 4);
 
-	mac_hi = cpu_to_le32(mac_hi);
-	mac_lo = cpu_to_le32(mac_lo);
-
 	if (pci_func & 1)
-		*mac = ((mac_lo >> 16) | ((u64)mac_hi << 16));
+		*mac = le64_to_cpu((mac_lo >> 16) | ((u64)mac_hi << 16));
 	else
-		*mac = ((mac_lo) | ((u64)mac_hi << 32));
+		*mac = le64_to_cpu((u64)mac_lo | ((u64)mac_hi << 32));
 
 	return 0;
 }
@@ -937,7 +956,7 @@
 {
 	int i;
 	u32 data, size = 0;
-	u32 flashaddr = NETXEN_BOOTLD_START, memaddr = NETXEN_BOOTLD_START;
+	u32 flashaddr = NETXEN_BOOTLD_START;
 
 	size = (NETXEN_IMAGE_START - NETXEN_BOOTLD_START)/4;
 
@@ -949,10 +968,8 @@
 		if (netxen_rom_fast_read(adapter, flashaddr, (int *)&data) != 0)
 			return -EIO;
 
-		adapter->pci_mem_write(adapter, memaddr, &data, 4);
+		adapter->pci_mem_write(adapter, flashaddr, &data, 4);
 		flashaddr += 4;
-		memaddr += 4;
-		cond_resched();
 	}
 	msleep(1);
 
@@ -2034,7 +2051,13 @@
 		rv = -1;
 	}
 
-	DPRINTK(INFO, "Discovered board type:0x%x  ", boardinfo->board_type);
+	if (boardinfo->board_type == NETXEN_BRDTYPE_P3_4_GB_MM) {
+		u32 gpio = netxen_nic_reg_read(adapter,
+				NETXEN_ROMUSB_GLB_PAD_GPIO_I);
+		if ((gpio & 0x8000) == 0)
+			boardinfo->board_type = NETXEN_BRDTYPE_P3_10G_TP;
+	}
+
 	switch ((netxen_brdtype_t) boardinfo->board_type) {
 	case NETXEN_BRDTYPE_P2_SB35_4G:
 		adapter->ahw.board_type = NETXEN_NIC_GBE;
@@ -2053,7 +2076,6 @@
 	case NETXEN_BRDTYPE_P3_10G_SFP_QT:
 	case NETXEN_BRDTYPE_P3_10G_XFP:
 	case NETXEN_BRDTYPE_P3_10000_BASE_T:
-
 		adapter->ahw.board_type = NETXEN_NIC_XGBE;
 		break;
 	case NETXEN_BRDTYPE_P1_BD:
@@ -2063,9 +2085,12 @@
 	case NETXEN_BRDTYPE_P3_REF_QG:
 	case NETXEN_BRDTYPE_P3_4_GB:
 	case NETXEN_BRDTYPE_P3_4_GB_MM:
-
 		adapter->ahw.board_type = NETXEN_NIC_GBE;
 		break;
+	case NETXEN_BRDTYPE_P3_10G_TP:
+		adapter->ahw.board_type = (adapter->portnum < 2) ?
+			NETXEN_NIC_XGBE : NETXEN_NIC_GBE;
+		break;
 	default:
 		printk("%s: Unknown(%x)\n", netxen_nic_driver_name,
 		       boardinfo->board_type);
@@ -2110,12 +2135,16 @@
 {
 	__u32 status;
 	__u32 autoneg;
-	__u32 mode;
 	__u32 port_mode;
 
-	netxen_nic_read_w0(adapter, NETXEN_NIU_MODE, &mode);
-	if (netxen_get_niu_enable_ge(mode)) {	/* Gb 10/100/1000 Mbps mode */
+	if (!netif_carrier_ok(adapter->netdev)) {
+		adapter->link_speed   = 0;
+		adapter->link_duplex  = -1;
+		adapter->link_autoneg = AUTONEG_ENABLE;
+		return;
+	}
 
+	if (adapter->ahw.board_type == NETXEN_NIC_GBE) {
 		adapter->hw_read_wx(adapter,
 				NETXEN_PORT_MODE_ADDR, &port_mode, 4);
 		if (port_mode == NETXEN_PORT_MODE_802_3_AP) {
@@ -2141,7 +2170,7 @@
 					adapter->link_speed = SPEED_1000;
 					break;
 				default:
-					adapter->link_speed = -1;
+					adapter->link_speed = 0;
 					break;
 				}
 				switch (netxen_get_phy_duplex(status)) {
@@ -2164,7 +2193,7 @@
 				goto link_down;
 		} else {
 		      link_down:
-			adapter->link_speed = -1;
+			adapter->link_speed = 0;
 			adapter->link_duplex = -1;
 		}
 	}
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index d924468..ca7c8d8 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -308,7 +308,6 @@
 			}
 			memset(rds_ring->rx_buf_arr, 0, RCV_BUFFSIZE);
 			INIT_LIST_HEAD(&rds_ring->free_list);
-			rds_ring->begin_alloc = 0;
 			/*
 			 * Now go through all of them, set reference handles
 			 * and put them in the queues.
@@ -439,6 +438,8 @@
 	long timeout = 0;
 	long done = 0;
 
+	cond_resched();
+
 	while (done == 0) {
 		done = netxen_nic_reg_read(adapter, NETXEN_ROMUSB_GLB_STATUS);
 		done &= 2;
@@ -533,12 +534,9 @@
 static int do_rom_fast_read(struct netxen_adapter *adapter,
 			    int addr, int *valp)
 {
-	cond_resched();
-
 	netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ADDRESS, addr);
-	netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 3);
-	udelay(100);		/* prevent bursting on CRB */
 	netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_DUMMY_BYTE_CNT, 0);
+	netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 3);
 	netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_INSTR_OPCODE, 0xb);
 	if (netxen_wait_rom_done(adapter)) {
 		printk("Error waiting for rom done\n");
@@ -546,7 +544,7 @@
 	}
 	/* reset abyte_cnt and dummy_byte_cnt */
 	netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 0);
-	udelay(100);		/* prevent bursting on CRB */
+	udelay(10);
 	netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_DUMMY_BYTE_CNT, 0);
 
 	*valp = netxen_nic_reg_read(adapter, NETXEN_ROMUSB_ROM_RDATA);
@@ -884,14 +882,16 @@
 int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
 {
 	int addr, val;
-	int i, init_delay = 0;
+	int i, n, init_delay = 0;
 	struct crb_addr_pair *buf;
-	unsigned offset, n;
+	unsigned offset;
 	u32 off;
 
 	/* resetall */
+	rom_lock(adapter);
 	netxen_crb_writelit_adapter(adapter, NETXEN_ROMUSB_GLB_SW_RESET,
 				    0xffffffff);
+	netxen_rom_unlock(adapter);
 
 	if (verbose) {
 		if (netxen_rom_fast_read(adapter, NETXEN_BOARDTYPE, &val) == 0)
@@ -910,7 +910,7 @@
 
 	if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
 		if (netxen_rom_fast_read(adapter, 0, &n) != 0 ||
-			(n != 0xcafecafeUL) ||
+			(n != 0xcafecafe) ||
 			netxen_rom_fast_read(adapter, 4, &n) != 0) {
 			printk(KERN_ERR "%s: ERROR Reading crb_init area: "
 					"n: %08x\n", netxen_nic_driver_name, n);
@@ -975,6 +975,14 @@
 			/* do not reset PCI */
 			if (off == (ROMUSB_GLB + 0xbc))
 				continue;
+			if (off == (ROMUSB_GLB + 0xa8))
+				continue;
+			if (off == (ROMUSB_GLB + 0xc8)) /* core clock */
+				continue;
+			if (off == (ROMUSB_GLB + 0x24)) /* MN clock */
+				continue;
+			if (off == (ROMUSB_GLB + 0x1c)) /* MS clock */
+				continue;
 			if (off == (NETXEN_CRB_PEG_NET_1 + 0x18))
 				buf[i].data = 0x1020;
 			/* skip the function enable register */
@@ -992,23 +1000,21 @@
 			continue;
 		}
 
+		init_delay = 1;
 		/* After writing this register, HW needs time for CRB */
 		/* to quiet down (else crb_window returns 0xffffffff) */
 		if (off == NETXEN_ROMUSB_GLB_SW_RESET) {
-			init_delay = 1;
+			init_delay = 1000;
 			if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
 				/* hold xdma in reset also */
 				buf[i].data = NETXEN_NIC_XDMA_RESET;
+				buf[i].data = 0x8000ff;
 			}
 		}
 
 		adapter->hw_write_wx(adapter, off, &buf[i].data, 4);
 
-		if (init_delay == 1) {
-			msleep(1000);
-			init_delay = 0;
-		}
-		msleep(1);
+		msleep(init_delay);
 	}
 	kfree(buf);
 
@@ -1277,7 +1283,7 @@
 
 		dev_kfree_skb_any(skb);
 		for (i = 0; i < nr_frags; i++) {
-			index = frag_desc->frag_handles[i];
+			index = le16_to_cpu(frag_desc->frag_handles[i]);
 			skb = netxen_process_rxbuf(adapter,
 					rds_ring, index, cksum);
 			if (skb)
@@ -1428,7 +1434,6 @@
 	struct rcv_desc *pdesc;
 	struct netxen_rx_buffer *buffer;
 	int count = 0;
-	int index = 0;
 	netxen_ctx_msg msg = 0;
 	dma_addr_t dma;
 	struct list_head *head;
@@ -1436,7 +1441,6 @@
 	rds_ring = &recv_ctx->rds_rings[ringid];
 
 	producer = rds_ring->producer;
-	index = rds_ring->begin_alloc;
 	head = &rds_ring->free_list;
 
 	/* We can start writing rx descriptors into the phantom memory. */
@@ -1444,39 +1448,37 @@
 
 		skb = dev_alloc_skb(rds_ring->skb_size);
 		if (unlikely(!skb)) {
-			rds_ring->begin_alloc = index;
 			break;
 		}
 
+		if (!adapter->ahw.cut_through)
+			skb_reserve(skb, 2);
+
+		dma = pci_map_single(pdev, skb->data,
+				rds_ring->dma_size, PCI_DMA_FROMDEVICE);
+		if (pci_dma_mapping_error(pdev, dma)) {
+			dev_kfree_skb_any(skb);
+			break;
+		}
+
+		count++;
 		buffer = list_entry(head->next, struct netxen_rx_buffer, list);
 		list_del(&buffer->list);
 
-		count++;	/* now there should be no failure */
-		pdesc = &rds_ring->desc_head[producer];
-
-		if (!adapter->ahw.cut_through)
-			skb_reserve(skb, 2);
-		/* This will be setup when we receive the
-		 * buffer after it has been filled  FSL  TBD TBD
-		 * skb->dev = netdev;
-		 */
-		dma = pci_map_single(pdev, skb->data, rds_ring->dma_size,
-				     PCI_DMA_FROMDEVICE);
-		pdesc->addr_buffer = cpu_to_le64(dma);
 		buffer->skb = skb;
 		buffer->state = NETXEN_BUFFER_BUSY;
 		buffer->dma = dma;
+
 		/* make a rcv descriptor  */
+		pdesc = &rds_ring->desc_head[producer];
+		pdesc->addr_buffer = cpu_to_le64(dma);
 		pdesc->reference_handle = cpu_to_le16(buffer->ref_handle);
 		pdesc->buffer_length = cpu_to_le32(rds_ring->dma_size);
-		DPRINTK(INFO, "done writing descripter\n");
-		producer =
-		    get_next_index(producer, rds_ring->max_rx_desc_count);
-		index = get_next_index(index, rds_ring->max_rx_desc_count);
+
+		producer = get_next_index(producer, rds_ring->max_rx_desc_count);
 	}
 	/* if we did allocate buffers, then write the count to Phantom */
 	if (count) {
-		rds_ring->begin_alloc = index;
 		rds_ring->producer = producer;
 			/* Window = 1 */
 		adapter->pci_write_normalize(adapter,
@@ -1515,49 +1517,50 @@
 	struct rcv_desc *pdesc;
 	struct netxen_rx_buffer *buffer;
 	int count = 0;
-	int index = 0;
 	struct list_head *head;
+	dma_addr_t dma;
 
 	rds_ring = &recv_ctx->rds_rings[ringid];
 
 	producer = rds_ring->producer;
-	index = rds_ring->begin_alloc;
 	head = &rds_ring->free_list;
 	/* We can start writing rx descriptors into the phantom memory. */
 	while (!list_empty(head)) {
 
 		skb = dev_alloc_skb(rds_ring->skb_size);
 		if (unlikely(!skb)) {
-			rds_ring->begin_alloc = index;
 			break;
 		}
 
+		if (!adapter->ahw.cut_through)
+			skb_reserve(skb, 2);
+
+		dma = pci_map_single(pdev, skb->data,
+				rds_ring->dma_size, PCI_DMA_FROMDEVICE);
+		if (pci_dma_mapping_error(pdev, dma)) {
+			dev_kfree_skb_any(skb);
+			break;
+		}
+
+		count++;
 		buffer = list_entry(head->next, struct netxen_rx_buffer, list);
 		list_del(&buffer->list);
 
-		count++;	/* now there should be no failure */
-		pdesc = &rds_ring->desc_head[producer];
-		if (!adapter->ahw.cut_through)
-			skb_reserve(skb, 2);
 		buffer->skb = skb;
 		buffer->state = NETXEN_BUFFER_BUSY;
-		buffer->dma = pci_map_single(pdev, skb->data,
-					     rds_ring->dma_size,
-					     PCI_DMA_FROMDEVICE);
+		buffer->dma = dma;
 
 		/* make a rcv descriptor  */
+		pdesc = &rds_ring->desc_head[producer];
 		pdesc->reference_handle = cpu_to_le16(buffer->ref_handle);
 		pdesc->buffer_length = cpu_to_le32(rds_ring->dma_size);
 		pdesc->addr_buffer = cpu_to_le64(buffer->dma);
-		producer =
-		    get_next_index(producer, rds_ring->max_rx_desc_count);
-		index = get_next_index(index, rds_ring->max_rx_desc_count);
-		buffer = &rds_ring->rx_buf_arr[index];
+
+		producer = get_next_index(producer, rds_ring->max_rx_desc_count);
 	}
 
 	/* if we did allocate buffers, then write the count to Phantom */
 	if (count) {
-		rds_ring->begin_alloc = index;
 		rds_ring->producer = producer;
 			/* Window = 1 */
 		adapter->pci_write_normalize(adapter,
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index ba01524..645d384 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -39,7 +39,9 @@
 #include "netxen_nic_phan_reg.h"
 
 #include <linux/dma-mapping.h>
+#include <linux/if_vlan.h>
 #include <net/ip.h>
+#include <linux/ipv6.h>
 
 MODULE_DESCRIPTION("NetXen Multi port (1/10) Gigabit Network Driver");
 MODULE_LICENSE("GPL");
@@ -242,7 +244,7 @@
 	case NETXEN_BRDTYPE_P3_4_GB:
 	case NETXEN_BRDTYPE_P3_4_GB_MM:
 		adapter->msix_supported = !!use_msi_x;
-		adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_10G;
+		adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_1G;
 		break;
 
 	case NETXEN_BRDTYPE_P2_SB35_4G:
@@ -251,6 +253,14 @@
 		adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_1G;
 		break;
 
+	case NETXEN_BRDTYPE_P3_10G_TP:
+		adapter->msix_supported = !!use_msi_x;
+		if (adapter->ahw.board_type == NETXEN_NIC_XGBE)
+			adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_10G;
+		else
+			adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_1G;
+		break;
+
 	default:
 		adapter->msix_supported = 0;
 		adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_1G;
@@ -271,10 +281,15 @@
 static int
 netxen_check_hw_init(struct netxen_adapter *adapter, int first_boot)
 {
-	int ret = 0;
+	u32 val, timeout;
 
 	if (first_boot == 0x55555555) {
 		/* This is the first boot after power up */
+		adapter->pci_write_normalize(adapter,
+			NETXEN_CAM_RAM(0x1fc), NETXEN_BDINFO_MAGIC);
+
+		if (!NX_IS_REVISION_P2(adapter->ahw.revision_id))
+			return 0;
 
 		/* PCI bus master workaround */
 		adapter->hw_read_wx(adapter,
@@ -294,18 +309,26 @@
 			/* clear the register for future unloads/loads */
 			adapter->pci_write_normalize(adapter,
 					NETXEN_CAM_RAM(0x1fc), 0);
-			ret = -1;
+			return -EIO;
 		}
 
-		if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
-			/* Start P2 boot loader */
-			adapter->pci_write_normalize(adapter,
-				NETXEN_CAM_RAM(0x1fc), NETXEN_BDINFO_MAGIC);
-			adapter->pci_write_normalize(adapter,
-					NETXEN_ROMUSB_GLB_PEGTUNE_DONE, 1);
-		}
+		/* Start P2 boot loader */
+		val = adapter->pci_read_normalize(adapter,
+				NETXEN_ROMUSB_GLB_PEGTUNE_DONE);
+		adapter->pci_write_normalize(adapter,
+				NETXEN_ROMUSB_GLB_PEGTUNE_DONE, val | 0x1);
+		timeout = 0;
+		do {
+			msleep(1);
+			val = adapter->pci_read_normalize(adapter,
+					NETXEN_CAM_RAM(0x1fc));
+
+			if (++timeout > 5000)
+				return -EIO;
+
+		} while (val == NETXEN_BDINFO_MAGIC);
 	}
-	return ret;
+	return 0;
 }
 
 static void netxen_set_port_mode(struct netxen_adapter *adapter)
@@ -712,17 +735,18 @@
 
 	SET_ETHTOOL_OPS(netdev, &netxen_nic_ethtool_ops);
 
-	/* ScatterGather support */
-	netdev->features = NETIF_F_SG;
-	netdev->features |= NETIF_F_IP_CSUM;
-	netdev->features |= NETIF_F_TSO;
+	netdev->features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO);
+	netdev->vlan_features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO);
+
 	if (NX_IS_REVISION_P3(revision_id)) {
-		netdev->features |= NETIF_F_IPV6_CSUM;
-		netdev->features |= NETIF_F_TSO6;
+		netdev->features |= (NETIF_F_IPV6_CSUM | NETIF_F_TSO6);
+		netdev->vlan_features |= (NETIF_F_IPV6_CSUM | NETIF_F_TSO6);
 	}
 
-	if (adapter->pci_using_dac)
+	if (adapter->pci_using_dac) {
 		netdev->features |= NETIF_F_HIGHDMA;
+		netdev->vlan_features |= NETIF_F_HIGHDMA;
+	}
 
 	/*
 	 * Set the CRB window to invalid. If any register in window 0 is
@@ -784,8 +808,8 @@
 						CRB_CMDPEG_STATE, 0);
 			netxen_pinit_from_rom(adapter, 0);
 			msleep(1);
-			netxen_load_firmware(adapter);
 		}
+		netxen_load_firmware(adapter);
 
 		if (NX_IS_REVISION_P3(revision_id))
 			netxen_pcie_strap_init(adapter);
@@ -801,13 +825,6 @@
 
 		}
 
-		if ((first_boot == 0x55555555) &&
-			(NX_IS_REVISION_P2(revision_id))) {
-			/* Unlock the HW, prompting the boot sequence */
-			adapter->pci_write_normalize(adapter,
-					NETXEN_ROMUSB_GLB_PEGTUNE_DONE, 1);
-		}
-
 		err = netxen_initialize_adapter_offload(adapter);
 		if (err)
 			goto err_out_iounmap;
@@ -821,7 +838,9 @@
 		adapter->pci_write_normalize(adapter, CRB_DRIVER_VERSION, i);
 
 		/* Handshake with the card before we register the devices. */
-		netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
+		err = netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
+		if (err)
+			goto err_out_free_offload;
 
 	}	/* first_driver */
 
@@ -925,6 +944,7 @@
 	if (adapter->flags & NETXEN_NIC_MSI_ENABLED)
 		pci_disable_msi(pdev);
 
+err_out_free_offload:
 	if (first_driver)
 		netxen_free_adapter_offload(adapter);
 
@@ -968,6 +988,9 @@
 		netxen_free_hw_resources(adapter);
 		netxen_release_rx_buffers(adapter);
 		netxen_free_sw_resources(adapter);
+
+		if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+			netxen_p3_free_mac_list(adapter);
 	}
 
 	if (adapter->portnum == 0)
@@ -983,8 +1006,10 @@
 
 	iounmap(adapter->ahw.db_base);
 	iounmap(adapter->ahw.pci_base0);
-	iounmap(adapter->ahw.pci_base1);
-	iounmap(adapter->ahw.pci_base2);
+	if (adapter->ahw.pci_base1 != NULL)
+		iounmap(adapter->ahw.pci_base1);
+	if (adapter->ahw.pci_base2 != NULL)
+		iounmap(adapter->ahw.pci_base2);
 
 	pci_release_regions(pdev);
 	pci_disable_device(pdev);
@@ -1137,29 +1162,72 @@
 	return 0;
 }
 
-void netxen_tso_check(struct netxen_adapter *adapter,
+static bool netxen_tso_check(struct net_device *netdev,
 		      struct cmd_desc_type0 *desc, struct sk_buff *skb)
 {
-	if (desc->mss) {
-		desc->total_hdr_length = (sizeof(struct ethhdr) +
-					  ip_hdrlen(skb) + tcp_hdrlen(skb));
+	bool tso = false;
+	u8 opcode = TX_ETHER_PKT;
+	__be16 protocol = skb->protocol;
+	u16 flags = 0;
 
-		if ((NX_IS_REVISION_P3(adapter->ahw.revision_id)) &&
-				(skb->protocol == htons(ETH_P_IPV6)))
-			netxen_set_cmd_desc_opcode(desc, TX_TCP_LSO6);
-		else
-			netxen_set_cmd_desc_opcode(desc, TX_TCP_LSO);
+	if (protocol == __constant_htons(ETH_P_8021Q)) {
+		struct vlan_ethhdr *vh = (struct vlan_ethhdr *)skb->data;
+		protocol = vh->h_vlan_encapsulated_proto;
+		flags = FLAGS_VLAN_TAGGED;
+	}
+
+	if ((netdev->features & (NETIF_F_TSO | NETIF_F_TSO6)) &&
+			skb_shinfo(skb)->gso_size > 0) {
+
+		desc->mss = cpu_to_le16(skb_shinfo(skb)->gso_size);
+		desc->total_hdr_length =
+			skb_transport_offset(skb) + tcp_hdrlen(skb);
+
+		opcode = (protocol == __constant_htons(ETH_P_IPV6)) ?
+				TX_TCP_LSO6 : TX_TCP_LSO;
+		tso = true;
 
 	} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
-		if (ip_hdr(skb)->protocol == IPPROTO_TCP)
-			netxen_set_cmd_desc_opcode(desc, TX_TCP_PKT);
-		else if (ip_hdr(skb)->protocol == IPPROTO_UDP)
-			netxen_set_cmd_desc_opcode(desc, TX_UDP_PKT);
-		else
-			return;
+		u8 l4proto;
+
+		if (protocol == __constant_htons(ETH_P_IP)) {
+			l4proto = ip_hdr(skb)->protocol;
+
+			if (l4proto == IPPROTO_TCP)
+				opcode = TX_TCP_PKT;
+			else if(l4proto == IPPROTO_UDP)
+				opcode = TX_UDP_PKT;
+		} else if (protocol == __constant_htons(ETH_P_IPV6)) {
+			l4proto = ipv6_hdr(skb)->nexthdr;
+
+			if (l4proto == IPPROTO_TCP)
+				opcode = TX_TCPV6_PKT;
+			else if(l4proto == IPPROTO_UDP)
+				opcode = TX_UDPV6_PKT;
+		}
 	}
 	desc->tcp_hdr_offset = skb_transport_offset(skb);
 	desc->ip_hdr_offset = skb_network_offset(skb);
+	netxen_set_tx_flags_opcode(desc, flags, opcode);
+	return tso;
+}
+
+static void
+netxen_clean_tx_dma_mapping(struct pci_dev *pdev,
+		struct netxen_cmd_buffer *pbuf, int last)
+{
+	int k;
+	struct netxen_skb_frag *buffrag;
+
+	buffrag = &pbuf->frag_array[0];
+	pci_unmap_single(pdev, buffrag->dma,
+			buffrag->length, PCI_DMA_TODEVICE);
+
+	for (k = 1; k < last; k++) {
+		buffrag = &pbuf->frag_array[k];
+		pci_unmap_page(pdev, buffrag->dma,
+			buffrag->length, PCI_DMA_TODEVICE);
+	}
 }
 
 static int netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
@@ -1167,33 +1235,22 @@
 	struct netxen_adapter *adapter = netdev_priv(netdev);
 	struct netxen_hardware_context *hw = &adapter->ahw;
 	unsigned int first_seg_len = skb->len - skb->data_len;
+	struct netxen_cmd_buffer *pbuf;
 	struct netxen_skb_frag *buffrag;
-	unsigned int i;
+	struct cmd_desc_type0 *hwdesc;
+	struct pci_dev *pdev = adapter->pdev;
+	dma_addr_t temp_dma;
+	int i, k;
 
 	u32 producer, consumer;
-	u32 saved_producer = 0;
-	struct cmd_desc_type0 *hwdesc;
-	int k;
-	struct netxen_cmd_buffer *pbuf = NULL;
-	int frag_count;
-	int no_of_desc;
+	int frag_count, no_of_desc;
 	u32 num_txd = adapter->max_tx_desc_count;
+	bool is_tso = false;
 
 	frag_count = skb_shinfo(skb)->nr_frags + 1;
 
 	/* There 4 fragments per descriptor */
 	no_of_desc = (frag_count + 3) >> 2;
-	if (netdev->features & (NETIF_F_TSO | NETIF_F_TSO6)) {
-		if (skb_shinfo(skb)->gso_size > 0) {
-
-			no_of_desc++;
-			if ((ip_hdrlen(skb) + tcp_hdrlen(skb) +
-			     sizeof(struct ethhdr)) >
-			    (sizeof(struct cmd_desc_type0) - 2)) {
-				no_of_desc++;
-			}
-		}
-	}
 
 	producer = adapter->cmd_producer;
 	smp_mb();
@@ -1205,34 +1262,26 @@
 	}
 
 	/* Copy the descriptors into the hardware    */
-	saved_producer = producer;
 	hwdesc = &hw->cmd_desc_head[producer];
 	memset(hwdesc, 0, sizeof(struct cmd_desc_type0));
 	/* Take skb->data itself */
 	pbuf = &adapter->cmd_buf_arr[producer];
-	if ((netdev->features & (NETIF_F_TSO | NETIF_F_TSO6)) &&
-			skb_shinfo(skb)->gso_size > 0) {
-		pbuf->mss = skb_shinfo(skb)->gso_size;
-		hwdesc->mss = cpu_to_le16(skb_shinfo(skb)->gso_size);
-	} else {
-		pbuf->mss = 0;
-		hwdesc->mss = 0;
-	}
-	pbuf->total_length = skb->len;
-	pbuf->skb = skb;
-	pbuf->cmd = TX_ETHER_PKT;
-	pbuf->frag_count = frag_count;
-	pbuf->port = adapter->portnum;
-	buffrag = &pbuf->frag_array[0];
-	buffrag->dma = pci_map_single(adapter->pdev, skb->data, first_seg_len,
-				      PCI_DMA_TODEVICE);
-	buffrag->length = first_seg_len;
-	netxen_set_cmd_desc_totallength(hwdesc, skb->len);
-	netxen_set_cmd_desc_num_of_buff(hwdesc, frag_count);
-	netxen_set_cmd_desc_opcode(hwdesc, TX_ETHER_PKT);
 
-	netxen_set_cmd_desc_port(hwdesc, adapter->portnum);
-	netxen_set_cmd_desc_ctxid(hwdesc, adapter->portnum);
+	is_tso = netxen_tso_check(netdev, hwdesc, skb);
+
+	pbuf->skb = skb;
+	pbuf->frag_count = frag_count;
+	buffrag = &pbuf->frag_array[0];
+	temp_dma = pci_map_single(pdev, skb->data, first_seg_len,
+				      PCI_DMA_TODEVICE);
+	if (pci_dma_mapping_error(pdev, temp_dma))
+		goto drop_packet;
+
+	buffrag->dma = temp_dma;
+	buffrag->length = first_seg_len;
+	netxen_set_tx_frags_len(hwdesc, frag_count, skb->len);
+	netxen_set_tx_port(hwdesc, adapter->portnum);
+
 	hwdesc->buffer1_length = cpu_to_le16(first_seg_len);
 	hwdesc->addr_buffer1 = cpu_to_le64(buffrag->dma);
 
@@ -1240,7 +1289,6 @@
 		struct skb_frag_struct *frag;
 		int len, temp_len;
 		unsigned long offset;
-		dma_addr_t temp_dma;
 
 		/* move to next desc. if there is a need */
 		if ((i & 0x3) == 0) {
@@ -1256,8 +1304,12 @@
 		offset = frag->page_offset;
 
 		temp_len = len;
-		temp_dma = pci_map_page(adapter->pdev, frag->page, offset,
+		temp_dma = pci_map_page(pdev, frag->page, offset,
 					len, PCI_DMA_TODEVICE);
+		if (pci_dma_mapping_error(pdev, temp_dma)) {
+			netxen_clean_tx_dma_mapping(pdev, pbuf, i);
+			goto drop_packet;
+		}
 
 		buffrag++;
 		buffrag->dma = temp_dma;
@@ -1285,16 +1337,12 @@
 	}
 	producer = get_next_index(producer, num_txd);
 
-	/* might change opcode to TX_TCP_LSO */
-	netxen_tso_check(adapter, &hw->cmd_desc_head[saved_producer], skb);
-
 	/* For LSO, we need to copy the MAC/IP/TCP headers into
 	 * the descriptor ring
 	 */
-	if (netxen_get_cmd_desc_opcode(&hw->cmd_desc_head[saved_producer])
-	    == TX_TCP_LSO) {
+	if (is_tso) {
 		int hdr_len, first_hdr_len, more_hdr;
-		hdr_len = hw->cmd_desc_head[saved_producer].total_hdr_length;
+		hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
 		if (hdr_len > (sizeof(struct cmd_desc_type0) - 2)) {
 			first_hdr_len = sizeof(struct cmd_desc_type0) - 2;
 			more_hdr = 1;
@@ -1336,6 +1384,11 @@
 	netdev->trans_start = jiffies;
 
 	return NETDEV_TX_OK;
+
+drop_packet:
+	adapter->stats.txdropped++;
+	dev_kfree_skb_any(skb);
+	return NETDEV_TX_OK;
 }
 
 static int netxen_nic_check_temp(struct netxen_adapter *adapter)
@@ -1407,6 +1460,8 @@
 			netif_carrier_off(netdev);
 			netif_stop_queue(netdev);
 		}
+
+		netxen_nic_set_link_parameters(adapter);
 	} else if (!adapter->ahw.linkup && linkup) {
 		printk(KERN_INFO "%s: %s NIC Link is up\n",
 		       netxen_nic_driver_name, netdev->name);
@@ -1415,6 +1470,8 @@
 			netif_carrier_on(netdev);
 			netif_wake_queue(netdev);
 		}
+
+		netxen_nic_set_link_parameters(adapter);
 	}
 }
 
diff --git a/drivers/net/pasemi_mac.c b/drivers/net/pasemi_mac.c
index 5b7a574..d0349e7 100644
--- a/drivers/net/pasemi_mac.c
+++ b/drivers/net/pasemi_mac.c
@@ -712,7 +712,7 @@
 	rcmdsta = read_dma_reg(PAS_DMA_RXINT_RCMDSTA(mac->dma_if));
 	ccmdsta = read_dma_reg(PAS_DMA_RXCHAN_CCMDSTA(chan->chno));
 
-	printk(KERN_ERR "pasemi_mac: rx error. macrx %016lx, rx status %lx\n",
+	printk(KERN_ERR "pasemi_mac: rx error. macrx %016llx, rx status %llx\n",
 		macrx, *chan->status);
 
 	printk(KERN_ERR "pasemi_mac: rcmdsta %08x ccmdsta %08x\n",
@@ -730,8 +730,8 @@
 
 	cmdsta = read_dma_reg(PAS_DMA_TXCHAN_TCMDSTA(chan->chno));
 
-	printk(KERN_ERR "pasemi_mac: tx error. mactx 0x%016lx, "\
-		"tx status 0x%016lx\n", mactx, *chan->status);
+	printk(KERN_ERR "pasemi_mac: tx error. mactx 0x%016llx, "\
+		"tx status 0x%016llx\n", mactx, *chan->status);
 
 	printk(KERN_ERR "pasemi_mac: tcmdsta 0x%08x\n", cmdsta);
 }
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 11adf6e..811a63769 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -296,9 +296,8 @@
 	struct phy_driver *phydrv = to_phy_driver(drv);
 	struct phy_device *phydev = to_phy_device(dev);
 
-	if ((!device_may_wakeup(phydev->dev.parent)) &&
-		(phydrv && phydrv->suspend))
-			ret = phydrv->suspend(phydev);
+	if (drv && phydrv->suspend && !device_may_wakeup(phydev->dev.parent))
+		ret = phydrv->suspend(phydev);
 
 	return ret;
 }
@@ -310,8 +309,7 @@
 	struct phy_driver *phydrv = to_phy_driver(drv);
 	struct phy_device *phydev = to_phy_device(dev);
 
-	if ((!device_may_wakeup(phydev->dev.parent)) &&
-		(phydrv && phydrv->resume))
+	if (drv && phydrv->resume && !device_may_wakeup(phydev->dev.parent))
 		ret = phydrv->resume(phydev);
 
 	return ret;
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index e354601..0a06e4f 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -231,15 +231,6 @@
 	if ((phy_id & 0x1fffffff) == 0x1fffffff)
 		return NULL;
 
-	/*
-	 * Broken hardware is sometimes missing the pull-up resistor on the
-	 * MDIO line, which results in reads to non-existent devices returning
-	 * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent
-	 * device as well.
-	 */
-	if (phy_id == 0)
-		return NULL;
-
 	dev = phy_device_create(bus, addr, phy_id);
 
 	return dev;
diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index c05d38d..13871875 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -81,6 +81,9 @@
 	.ack_interrupt	= smsc_phy_ack_interrupt,
 	.config_intr	= smsc_phy_config_intr,
 
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+
 	.driver		= { .owner = THIS_MODULE, }
 };
 
@@ -102,6 +105,9 @@
 	.ack_interrupt	= smsc_phy_ack_interrupt,
 	.config_intr	= smsc_phy_config_intr,
 
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+
 	.driver		= { .owner = THIS_MODULE, }
 };
 
@@ -123,6 +129,9 @@
 	.ack_interrupt	= smsc_phy_ack_interrupt,
 	.config_intr	= smsc_phy_config_intr,
 
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+
 	.driver		= { .owner = THIS_MODULE, }
 };
 
@@ -144,6 +153,9 @@
 	.ack_interrupt	= smsc_phy_ack_interrupt,
 	.config_intr	= smsc_phy_config_intr,
 
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+
 	.driver		= { .owner = THIS_MODULE, }
 };
 
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index 06b4482..7b2728b 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -250,6 +250,7 @@
 static int ppp_disconnect_channel(struct channel *pch);
 static void ppp_destroy_channel(struct channel *pch);
 static int unit_get(struct idr *p, void *ptr);
+static int unit_set(struct idr *p, void *ptr, int n);
 static void unit_put(struct idr *p, int n);
 static void *unit_find(struct idr *p, int n);
 
@@ -2432,11 +2433,18 @@
 	} else {
 		if (unit_find(&ppp_units_idr, unit))
 			goto out2; /* unit already exists */
-		else {
-			/* darn, someone is cheating us? */
-			*retp = -EINVAL;
+		/*
+		 * if caller need a specified unit number
+		 * lets try to satisfy him, otherwise --
+		 * he should better ask us for new unit number
+		 *
+		 * NOTE: yes I know that returning EEXIST it's not
+		 * fair but at least pppd will ask us to allocate
+		 * new unit in this case so user is happy :)
+		 */
+		unit = unit_set(&ppp_units_idr, ppp, unit);
+		if (unit < 0)
 			goto out2;
-		}
 	}
 
 	/* Initialize the new ppp unit */
@@ -2677,14 +2685,37 @@
  * by holding all_ppp_mutex
  */
 
+/* associate pointer with specified number */
+static int unit_set(struct idr *p, void *ptr, int n)
+{
+	int unit, err;
+
+again:
+	if (!idr_pre_get(p, GFP_KERNEL)) {
+		printk(KERN_ERR "PPP: No free memory for idr\n");
+		return -ENOMEM;
+	}
+
+	err = idr_get_new_above(p, ptr, n, &unit);
+	if (err == -EAGAIN)
+		goto again;
+
+	if (unit != n) {
+		idr_remove(p, unit);
+		return -EINVAL;
+	}
+
+	return unit;
+}
+
 /* get new free unit number and associate pointer with it */
 static int unit_get(struct idr *p, void *ptr)
 {
 	int unit, err;
 
 again:
-	if (idr_pre_get(p, GFP_KERNEL) == 0) {
-		printk(KERN_ERR "Out of memory expanding drawable idr\n");
+	if (!idr_pre_get(p, GFP_KERNEL)) {
+		printk(KERN_ERR "PPP: No free memory for idr\n");
 		return -ENOMEM;
 	}
 
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 6cbefca..be4465bc 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -509,10 +509,10 @@
 	else
 		ret = sis900_get_mac_addr(pci_dev, net_dev);
 
-	if (ret == 0) {
-		printk(KERN_WARNING "%s: Cannot read MAC address.\n", dev_name);
-		ret = -ENODEV;
-		goto err_unmap_rx;
+	if (!ret || !is_valid_ether_addr(net_dev->dev_addr)) {
+		random_ether_addr(net_dev->dev_addr);
+		printk(KERN_WARNING "%s: Unreadable or invalid MAC address,"
+				"using random generated one\n", dev_name);
 	}
 
 	/* 630ET : set the mii access mode as software-mode */
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 5e2dbae..8b3f846 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -7535,11 +7535,58 @@
 	return err;
 }
 
+static int tg3_request_firmware(struct tg3 *tp)
+{
+	const __be32 *fw_data;
+
+	if (request_firmware(&tp->fw, tp->fw_needed, &tp->pdev->dev)) {
+		printk(KERN_ERR "%s: Failed to load firmware \"%s\"\n",
+		       tp->dev->name, tp->fw_needed);
+		return -ENOENT;
+	}
+
+	fw_data = (void *)tp->fw->data;
+
+	/* Firmware blob starts with version numbers, followed by
+	 * start address and _full_ length including BSS sections
+	 * (which must be longer than the actual data, of course
+	 */
+
+	tp->fw_len = be32_to_cpu(fw_data[2]);	/* includes bss */
+	if (tp->fw_len < (tp->fw->size - 12)) {
+		printk(KERN_ERR "%s: bogus length %d in \"%s\"\n",
+		       tp->dev->name, tp->fw_len, tp->fw_needed);
+		release_firmware(tp->fw);
+		tp->fw = NULL;
+		return -EINVAL;
+	}
+
+	/* We no longer need firmware; we have it. */
+	tp->fw_needed = NULL;
+	return 0;
+}
+
 static int tg3_open(struct net_device *dev)
 {
 	struct tg3 *tp = netdev_priv(dev);
 	int err;
 
+	if (tp->fw_needed) {
+		err = tg3_request_firmware(tp);
+		if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0) {
+			if (err)
+				return err;
+		} else if (err) {
+			printk(KERN_WARNING "%s: TSO capability disabled.\n",
+			       tp->dev->name);
+			tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE;
+		} else if (!(tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE)) {
+			printk(KERN_NOTICE "%s: TSO capability restored.\n",
+			       tp->dev->name);
+			tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE;
+		}
+	}
+
 	netif_carrier_off(tp->dev);
 
 	err = tg3_set_power_state(tp, PCI_D0);
@@ -12934,7 +12981,6 @@
 	struct net_device *dev;
 	struct tg3 *tp;
 	int err, pm_cap;
-	const char *fw_name = NULL;
 	char str[40];
 	u64 dma_mask, persist_dma_mask;
 
@@ -13091,7 +13137,7 @@
 	tg3_init_bufmgr_config(tp);
 
 	if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0)
-		fw_name = FIRMWARE_TG3;
+		tp->fw_needed = FIRMWARE_TG3;
 
 	if (tp->tg3_flags2 & TG3_FLG2_HW_TSO) {
 		tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE;
@@ -13104,37 +13150,10 @@
 		tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE;
 	} else {
 		tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE | TG3_FLG2_TSO_BUG;
-	}
-	if (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) {
 		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705)
-			fw_name = FIRMWARE_TG3TSO5;
+			tp->fw_needed = FIRMWARE_TG3TSO5;
 		else
-			fw_name = FIRMWARE_TG3TSO;
-	}
-
-	if (fw_name) {
-		const __be32 *fw_data;
-
-		err = request_firmware(&tp->fw, fw_name, &tp->pdev->dev);
-		if (err) {
-			printk(KERN_ERR "tg3: Failed to load firmware \"%s\"\n",
-			       fw_name);
-			goto err_out_iounmap;
-		}
-
-		fw_data = (void *)tp->fw->data;
-
-		/* Firmware blob starts with version numbers, followed by
-		   start address and _full_ length including BSS sections
-		   (which must be longer than the actual data, of course */
-
-		tp->fw_len = be32_to_cpu(fw_data[2]);	/* includes bss */
-		if (tp->fw_len < (tp->fw->size - 12)) {
-			printk(KERN_ERR "tg3: bogus length %d in \"%s\"\n",
-			       tp->fw_len, fw_name);
-			err = -EINVAL;
-			goto err_out_fw;
-		}
+			tp->fw_needed = FIRMWARE_TG3TSO;
 	}
 
 	/* TSO is on by default on chips that support hardware TSO.
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index ae5da60..508def3 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2764,6 +2764,7 @@
 	struct ethtool_coalesce		coal;
 
 	/* firmware info */
+	const char			*fw_needed;
 	const struct firmware		*fw;
 	u32				fw_len; /* includes BSS */
 };
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index c4918b8..0d0fa91 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -1297,6 +1297,7 @@
 	/* setup */
 	spin_lock_irq(&serial->serial_lock);
 	tty->driver_data = serial;
+	tty_kref_put(serial->tty);
 	serial->tty = tty_kref_get(tty);
 	spin_unlock_irq(&serial->serial_lock);
 
@@ -1792,8 +1793,8 @@
 
 	/* initialize */
 	ctrl_req->wValue = 0;
-	ctrl_req->wIndex = hso_port_to_mux(port);
-	ctrl_req->wLength = size;
+	ctrl_req->wIndex = cpu_to_le16(hso_port_to_mux(port));
+	ctrl_req->wLength = cpu_to_le16(size);
 
 	if (type == USB_CDC_GET_ENCAPSULATED_RESPONSE) {
 		/* Reading command */
@@ -2043,9 +2044,8 @@
 		return -2;
 	}
 
-	spin_lock(&serial->serial_lock);
+	/* All callers to put_rxbuf_data hold serial_lock */
 	tty = tty_kref_get(serial->tty);
-	spin_unlock(&serial->serial_lock);
 
 	/* Push data to tty */
 	if (tty) {
@@ -2053,8 +2053,10 @@
 			serial->curr_rx_urb_offset;
 		D1("data to push to tty");
 		while (write_length_remaining) {
-			if (test_bit(TTY_THROTTLED, &tty->flags))
+			if (test_bit(TTY_THROTTLED, &tty->flags)) {
+				tty_kref_put(tty);
 				return -1;
+			}
 			curr_write_len =  tty_insert_flip_string
 				(tty, urb->transfer_buffer +
 				 serial->curr_rx_urb_offset,
diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c
index 5385d66..ced8f36e 100644
--- a/drivers/net/usb/mcs7830.c
+++ b/drivers/net/usb/mcs7830.c
@@ -94,10 +94,18 @@
 {
 	struct usb_device *xdev = dev->udev;
 	int ret;
+	void *buffer;
+
+	buffer = kmalloc(size, GFP_NOIO);
+	if (buffer == NULL)
+		return -ENOMEM;
 
 	ret = usb_control_msg(xdev, usb_rcvctrlpipe(xdev, 0), MCS7830_RD_BREQ,
-			      MCS7830_RD_BMREQ, 0x0000, index, data,
+			      MCS7830_RD_BMREQ, 0x0000, index, buffer,
 			      size, MCS7830_CTRL_TIMEOUT);
+	memcpy(data, buffer, size);
+	kfree(buffer);
+
 	return ret;
 }
 
@@ -105,10 +113,18 @@
 {
 	struct usb_device *xdev = dev->udev;
 	int ret;
+	void *buffer;
+
+	buffer = kmalloc(size, GFP_NOIO);
+	if (buffer == NULL)
+		return -ENOMEM;
+
+	memcpy(buffer, data, size);
 
 	ret = usb_control_msg(xdev, usb_sndctrlpipe(xdev, 0), MCS7830_WR_BREQ,
-			      MCS7830_WR_BMREQ, 0x0000, index, data,
+			      MCS7830_WR_BMREQ, 0x0000, index, buffer,
 			      size, MCS7830_CTRL_TIMEOUT);
+	kfree(buffer);
 	return ret;
 }
 
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index a75f91d..c5691fd 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -1302,7 +1302,7 @@
 static int velocity_init_td_ring(struct velocity_info *vptr)
 {
 	dma_addr_t curr;
-	unsigned int j;
+	int j;
 
 	/* Init the TD ring entries */
 	for (j = 0; j < vptr->tx.numq; j++) {
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 43f6523c..63ef2a8 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -24,6 +24,7 @@
 #include <linux/virtio.h>
 #include <linux/virtio_net.h>
 #include <linux/scatterlist.h>
+#include <linux/if_vlan.h>
 
 static int napi_weight = 128;
 module_param(napi_weight, int, 0444);
@@ -33,7 +34,7 @@
 module_param(gso, bool, 0444);
 
 /* FIXME: MTU in config. */
-#define MAX_PACKET_LEN (ETH_HLEN+ETH_DATA_LEN)
+#define MAX_PACKET_LEN (ETH_HLEN + VLAN_HLEN + ETH_DATA_LEN)
 #define GOOD_COPY_LEN	128
 
 struct virtnet_info
diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
index 2dc2416..0dbd85b 100644
--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c
@@ -622,7 +622,7 @@
 	printk(KERN_DEBUG "%s: hss_hdlc_rx_irq\n", dev->name);
 #endif
 	qmgr_disable_irq(queue_ids[port->id].rx);
-	netif_rx_schedule(dev, &port->napi);
+	netif_rx_schedule(&port->napi);
 }
 
 static int hss_hdlc_poll(struct napi_struct *napi, int budget)
@@ -651,7 +651,7 @@
 			printk(KERN_DEBUG "%s: hss_hdlc_poll"
 			       " netif_rx_complete\n", dev->name);
 #endif
-			netif_rx_complete(dev, napi);
+			netif_rx_complete(napi);
 			qmgr_enable_irq(rxq);
 			if (!qmgr_stat_empty(rxq) &&
 			    netif_rx_reschedule(napi)) {
@@ -1069,7 +1069,7 @@
 	hss_start_hdlc(port);
 
 	/* we may already have RX data, enables IRQ */
-	netif_rx_schedule(dev, &port->napi);
+	netif_rx_schedule(&port->napi);
 	return 0;
 
 err_unlock:
diff --git a/drivers/net/wimax/i2400m/control.c b/drivers/net/wimax/i2400m/control.c
index d3d37fe..15d9f51 100644
--- a/drivers/net/wimax/i2400m/control.c
+++ b/drivers/net/wimax/i2400m/control.c
@@ -609,7 +609,7 @@
 	spin_lock_irqsave(&i2400m->rx_lock, flags);
 	ack_skb = i2400m->ack_skb;
 	if (ack_skb && !IS_ERR(ack_skb))
-		kfree(ack_skb);
+		kfree_skb(ack_skb);
 	i2400m->ack_skb = ERR_PTR(code);
 	spin_unlock_irqrestore(&i2400m->rx_lock, flags);
 }
diff --git a/drivers/net/wimax/i2400m/usb-rx.c b/drivers/net/wimax/i2400m/usb-rx.c
index 074cc1f..a314799 100644
--- a/drivers/net/wimax/i2400m/usb-rx.c
+++ b/drivers/net/wimax/i2400m/usb-rx.c
@@ -184,6 +184,8 @@
  *   NOTE: this function might realloc the skb (if it is too small),
  *   so always update with the one returned.
  *   ERR_PTR() is < 0 on error.
+ *   Will return NULL if it cannot reallocate -- this can be
+ *   considered a transient retryable error.
  */
 static
 struct sk_buff *i2400mu_rx(struct i2400mu *i2400mu, struct sk_buff *rx_skb)
@@ -243,8 +245,8 @@
 			if (printk_ratelimit())
 				dev_err(dev, "RX: Can't reallocate skb to %d; "
 					"RX dropped\n", rx_size);
-			kfree(rx_skb);
-			result = 0;
+			kfree_skb(rx_skb);
+			rx_skb = NULL;
 			goto out;	/* drop it...*/
 		}
 		kfree_skb(rx_skb);
@@ -344,7 +346,8 @@
 		if (IS_ERR(rx_skb))
 			goto out;
 		atomic_dec(&i2400mu->rx_pending_count);
-		if (rx_skb->len == 0) {	/* some ignorable condition */
+		if (rx_skb == NULL || rx_skb->len == 0) {
+			/* some "ignorable" condition */
 			kfree_skb(rx_skb);
 			continue;
 		}
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index ea543fc..e4f9f74 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -111,7 +111,7 @@
 	  lets you choose drivers.
 
 config PCMCIA_RAYCS
-	tristate "Aviator/Raytheon 2.4MHz wireless support"
+	tristate "Aviator/Raytheon 2.4GHz wireless support"
 	depends on PCMCIA && WLAN_80211
 	select WIRELESS_EXT
 	---help---
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index 4af2607..8ef8735 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -2644,7 +2644,7 @@
 		if (skb_headroom(skb) < padsize) {
 			ATH5K_ERR(sc, "tx hdrlen not %%4: %d not enough"
 				  " headroom to pad %d\n", hdrlen, padsize);
-			return -1;
+			return NETDEV_TX_BUSY;
 		}
 		skb_push(skb, padsize);
 		memmove(skb->data, skb->data+padsize, hdrlen);
@@ -2655,7 +2655,7 @@
 		ATH5K_ERR(sc, "no further txbuf available, dropping packet\n");
 		spin_unlock_irqrestore(&sc->txbuflock, flags);
 		ieee80211_stop_queue(hw, skb_get_queue_mapping(skb));
-		return -1;
+		return NETDEV_TX_BUSY;
 	}
 	bf = list_first_entry(&sc->txbuf, struct ath5k_buf, list);
 	list_del(&bf->list);
@@ -2673,10 +2673,10 @@
 		sc->txbuf_len++;
 		spin_unlock_irqrestore(&sc->txbuflock, flags);
 		dev_kfree_skb_any(skb);
-		return 0;
+		return NETDEV_TX_OK;
 	}
 
-	return 0;
+	return NETDEV_TX_OK;
 }
 
 static int
diff --git a/drivers/net/wireless/ath5k/pcu.c b/drivers/net/wireless/ath5k/pcu.c
index 0cac05c..75eb9f4 100644
--- a/drivers/net/wireless/ath5k/pcu.c
+++ b/drivers/net/wireless/ath5k/pcu.c
@@ -65,7 +65,7 @@
 		if (ah->ah_version == AR5K_AR5210)
 			pcu_reg |= AR5K_STA_ID1_NO_PSPOLL;
 		else
-			AR5K_REG_DISABLE_BITS(ah, AR5K_CFG, AR5K_CFG_ADHOC);
+			AR5K_REG_ENABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS);
 		break;
 
 	case NL80211_IFTYPE_AP:
@@ -75,7 +75,7 @@
 		if (ah->ah_version == AR5K_AR5210)
 			pcu_reg |= AR5K_STA_ID1_NO_PSPOLL;
 		else
-			AR5K_REG_ENABLE_BITS(ah, AR5K_CFG, AR5K_CFG_ADHOC);
+			AR5K_REG_DISABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS);
 		break;
 
 	case NL80211_IFTYPE_STATION:
diff --git a/drivers/net/wireless/ath5k/reg.h b/drivers/net/wireless/ath5k/reg.h
index 91aaeaf..9189ab1 100644
--- a/drivers/net/wireless/ath5k/reg.h
+++ b/drivers/net/wireless/ath5k/reg.h
@@ -73,7 +73,7 @@
 #define	AR5K_CFG_SWRD		0x00000004	/* Byte-swap RX descriptor */
 #define	AR5K_CFG_SWRB		0x00000008	/* Byte-swap RX buffer */
 #define	AR5K_CFG_SWRG		0x00000010	/* Byte-swap Register access */
-#define AR5K_CFG_ADHOC		0x00000020 	/* AP/Adhoc indication [5211+] */
+#define AR5K_CFG_IBSS		0x00000020 	/* 0-BSS, 1-IBSS [5211+] */
 #define AR5K_CFG_PHY_OK		0x00000100	/* [5211+] */
 #define AR5K_CFG_EEBS		0x00000200	/* EEPROM is busy */
 #define	AR5K_CFG_CLKGD		0x00000400	/* Clock gated (Disable dynamic clock) */
diff --git a/drivers/net/wireless/ath9k/Kconfig b/drivers/net/wireless/ath9k/Kconfig
index c43bd32..90a8dd8 100644
--- a/drivers/net/wireless/ath9k/Kconfig
+++ b/drivers/net/wireless/ath9k/Kconfig
@@ -1,6 +1,7 @@
 config ATH9K
 	tristate "Atheros 802.11n wireless cards support"
 	depends on PCI && MAC80211 && WLAN_80211
+	depends on RFKILL || RFKILL=n
 	select MAC80211_LEDS
 	select LEDS_CLASS
 	select NEW_LEDS
diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
index 191eec5..727f067 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -2164,13 +2164,13 @@
 						    conf->ht.channel_type);
 		}
 
+		ath_update_chainmask(sc, conf->ht.enabled);
+
 		if (ath_set_channel(sc, &sc->sc_ah->ah_channels[pos]) < 0) {
 			DPRINTF(sc, ATH_DBG_FATAL, "Unable to set channel\n");
 			mutex_unlock(&sc->mutex);
 			return -EINVAL;
 		}
-
-		ath_update_chainmask(sc, conf->ht.enabled);
 	}
 
 	if (changed & IEEE80211_CONF_CHANGE_POWER)
diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c
index 04ab457..1b71b93 100644
--- a/drivers/net/wireless/ath9k/rc.c
+++ b/drivers/net/wireless/ath9k/rc.c
@@ -490,7 +490,7 @@
 
 static int ath_rc_valid_phyrate(u32 phy, u32 capflag, int ignore_cw)
 {
-	if (WLAN_RC_PHY_HT(phy) & !(capflag & WLAN_RC_HT_FLAG))
+	if (WLAN_RC_PHY_HT(phy) && !(capflag & WLAN_RC_HT_FLAG))
 		return 0;
 	if (WLAN_RC_PHY_DS(phy) && !(capflag & WLAN_RC_DS_FLAG))
 		return 0;
diff --git a/drivers/net/wireless/ath9k/regd_common.h b/drivers/net/wireless/ath9k/regd_common.h
index 9112c03..6df1b3b 100644
--- a/drivers/net/wireless/ath9k/regd_common.h
+++ b/drivers/net/wireless/ath9k/regd_common.h
@@ -228,7 +228,7 @@
 };
 
 #define REG_DOMAIN_2GHZ_MASK    (REQ_MASK & \
-	(!(ADHOC_NO_11A | DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB)))
+	(~(ADHOC_NO_11A | DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB)))
 #define REG_DOMAIN_5GHZ_MASK    REQ_MASK
 
 static struct reg_dmn_pair_mapping regDomainPairs[] = {
diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c
index 3bfc3b9..c92f0c6 100644
--- a/drivers/net/wireless/ath9k/xmit.c
+++ b/drivers/net/wireless/ath9k/xmit.c
@@ -126,15 +126,7 @@
 		tx_info->flags |= IEEE80211_TX_STAT_ACK;
 	}
 
-	tx_info->status.rates[0].count = tx_status->retries;
-	if (tx_info->status.rates[0].flags & IEEE80211_TX_RC_MCS) {
-		/* Change idx from internal table index to MCS index */
-		int idx = tx_info->status.rates[0].idx;
-		struct ath_rate_table *rate_table = sc->cur_rate_table;
-		if (idx >= 0 && idx < rate_table->rate_cnt)
-			tx_info->status.rates[0].idx =
-				rate_table->info[idx].ratecode & 0x7f;
-	}
+	tx_info->status.rates[0].count = tx_status->retries + 1;
 
 	hdrlen = ieee80211_get_hdrlen_from_skb(skb);
 	padsize = hdrlen & 3;
@@ -264,25 +256,22 @@
 	}
 
 	/* Get seqno */
-
-	if (ieee80211_is_data(fc) && !is_pae(skb)) {
-		/* For HT capable stations, we save tidno for later use.
-		 * We also override seqno set by upper layer with the one
-		 * in tx aggregation state.
-		 *
-		 * If fragmentation is on, the sequence number is
-		 * not overridden, since it has been
-		 * incremented by the fragmentation routine.
-		 *
-		 * FIXME: check if the fragmentation threshold exceeds
-		 * IEEE80211 max.
-		 */
-		tid = ATH_AN_2_TID(an, bf->bf_tidno);
-		hdr->seq_ctrl = cpu_to_le16(tid->seq_next <<
-					    IEEE80211_SEQ_SEQ_SHIFT);
-		bf->bf_seqno = tid->seq_next;
-		INCR(tid->seq_next, IEEE80211_SEQ_MAX);
-	}
+	/* For HT capable stations, we save tidno for later use.
+	 * We also override seqno set by upper layer with the one
+	 * in tx aggregation state.
+	 *
+	 * If fragmentation is on, the sequence number is
+	 * not overridden, since it has been
+	 * incremented by the fragmentation routine.
+	 *
+	 * FIXME: check if the fragmentation threshold exceeds
+	 * IEEE80211 max.
+	 */
+	tid = ATH_AN_2_TID(an, bf->bf_tidno);
+	hdr->seq_ctrl = cpu_to_le16(tid->seq_next <<
+			IEEE80211_SEQ_SEQ_SHIFT);
+	bf->bf_seqno = tid->seq_next;
+	INCR(tid->seq_next, IEEE80211_SEQ_MAX);
 }
 
 static int setup_tx_flags(struct ath_softc *sc, struct sk_buff *skb,
@@ -1718,11 +1707,10 @@
 
 	/* Assign seqno, tidno */
 
-	if (bf_isht(bf) && (sc->sc_flags & SC_OP_TXAGGR))
+	if (ieee80211_is_data_qos(fc) && (sc->sc_flags & SC_OP_TXAGGR))
 		assign_aggr_tid_seqno(skb, bf);
 
 	/* DMA setup */
-
 	bf->bf_mpdu = skb;
 
 	bf->bf_dmacontext = pci_map_single(sc->pdev, skb->data,
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 7b31a32..c788bad 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -3261,7 +3261,7 @@
 	struct b43_wldev *down_dev;
 	struct b43_wldev *d;
 	int err;
-	bool gmode;
+	bool uninitialized_var(gmode);
 	int prev_status;
 
 	/* Find a device and PHY which supports the band. */
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index c1324e3..fb996c2 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -2465,7 +2465,7 @@
 static int b43legacy_switch_phymode(struct b43legacy_wl *wl,
 				      unsigned int new_mode)
 {
-	struct b43legacy_wldev *up_dev;
+	struct b43legacy_wldev *uninitialized_var(up_dev);
 	struct b43legacy_wldev *down_dev;
 	int err;
 	bool gmode = 0;
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
index 9b60a0c..21c8418 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
@@ -638,12 +638,16 @@
 	s8 scale_action = 0;
 	unsigned long flags;
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
-	u16 fc, rate_mask;
+	u16 fc;
+	u16 rate_mask = 0;
 	struct iwl3945_priv *priv = (struct iwl3945_priv *)priv_r;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 
 	IWL_DEBUG_RATE("enter\n");
 
+	if (sta)
+		rate_mask = sta->supp_rates[sband->band];
+
 	/* Send management frames and broadcast/multicast data using lowest
 	 * rate. */
 	fc = le16_to_cpu(hdr->frame_control);
@@ -651,11 +655,15 @@
 	    is_multicast_ether_addr(hdr->addr1) ||
 	    !sta || !priv_sta) {
 		IWL_DEBUG_RATE("leave: No STA priv data to update!\n");
-		info->control.rates[0].idx = rate_lowest_index(sband, sta);
+		if (!rate_mask)
+			info->control.rates[0].idx =
+					rate_lowest_index(sband, NULL);
+		else
+			info->control.rates[0].idx =
+					rate_lowest_index(sband, sta);
 		return;
 	}
 
-	rate_mask = sta->supp_rates[sband->band];
 	index = min(rs_sta->last_txrate_idx & 0xffff, IWL_RATE_COUNT - 1);
 
 	if (sband->band == IEEE80211_BAND_5GHZ)
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index 8fdb342..45cfa1cf 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -2219,7 +2219,7 @@
 		/* set tx power value for all OFDM rates */
 		for (rate_index = 0; rate_index < IWL_OFDM_RATES;
 		     rate_index++) {
-			s32 power_idx;
+			s32 uninitialized_var(power_idx);
 			int rc;
 
 			/* use channel group's clip-power table,
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
index f3f1792..27f5047 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -944,7 +944,8 @@
 	}
 
 	/* See if there's a better rate or modulation mode to try. */
-	rs_rate_scale_perform(priv, hdr, sta, lq_sta);
+	if (sta && sta->supp_rates[sband->band])
+		rs_rate_scale_perform(priv, hdr, sta, lq_sta);
 out:
 	return;
 }
@@ -2101,14 +2102,23 @@
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct iwl_lq_sta *lq_sta = priv_sta;
 	int rate_idx;
+	u64 mask_bit = 0;
 
 	IWL_DEBUG_RATE_LIMIT("rate scale calculate new rate for skb\n");
 
+	if (sta)
+		mask_bit = sta->supp_rates[sband->band];
+
 	/* Send management frames and broadcast/multicast data using lowest
 	 * rate. */
 	if (!ieee80211_is_data(hdr->frame_control) ||
 	    is_multicast_ether_addr(hdr->addr1) || !sta || !lq_sta) {
-		info->control.rates[0].idx = rate_lowest_index(sband, sta);
+		if (!mask_bit)
+			info->control.rates[0].idx =
+					rate_lowest_index(sband, NULL);
+		else
+			info->control.rates[0].idx =
+					rate_lowest_index(sband, sta);
 		return;
 	}
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 5da6b35..0dc8eed 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2482,7 +2482,7 @@
 		dev_kfree_skb_any(skb);
 
 	IWL_DEBUG_MACDUMP("leave\n");
-	return 0;
+	return NETDEV_TX_OK;
 }
 
 static int iwl_mac_add_interface(struct ieee80211_hw *hw,
diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index 52966ff..ba99720 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -255,7 +255,7 @@
  *        0x3)  54 Mbps
  *
  * Legacy CCK rate format for bits 7:0 (bit 8 must be "0", bit 9 "1"):
- *  3-0:   10)  1 Mbps
+ *  6-0:   10)  1 Mbps
  *         20)  2 Mbps
  *         55)  5.5 Mbps
  *        110)  11 Mbps
diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
index 01a2169..4b35b30 100644
--- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c
+++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
@@ -51,6 +51,7 @@
 		IWL_CMD(REPLY_REMOVE_STA);
 		IWL_CMD(REPLY_REMOVE_ALL_STA);
 		IWL_CMD(REPLY_WEPKEY);
+		IWL_CMD(REPLY_3945_RX);
 		IWL_CMD(REPLY_TX);
 		IWL_CMD(REPLY_RATE_SCALE);
 		IWL_CMD(REPLY_LEDS_CMD);
@@ -223,7 +224,7 @@
 		IWL_ERROR("Error: Response NULL in '%s'\n",
 			  get_cmd_string(cmd->id));
 		ret = -EIO;
-		goto out;
+		goto cancel;
 	}
 
 	ret = 0;
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index d645808..95d0198 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -745,7 +745,7 @@
 		IWL_ERROR("Error: Response NULL in '%s'\n",
 			  get_cmd_string(cmd->id));
 		ret = -EIO;
-		goto out;
+		goto cancel;
 	}
 
 	ret = 0;
@@ -6538,7 +6538,7 @@
 		dev_kfree_skb_any(skb);
 
 	IWL_DEBUG_MAC80211("leave\n");
-	return 0;
+	return NETDEV_TX_OK;
 }
 
 static int iwl3945_mac_add_interface(struct ieee80211_hw *hw,
diff --git a/drivers/net/wireless/libertas/hostcmd.h b/drivers/net/wireless/libertas/hostcmd.h
index e173b1b..f6a79a6 100644
--- a/drivers/net/wireless/libertas/hostcmd.h
+++ b/drivers/net/wireless/libertas/hostcmd.h
@@ -32,7 +32,7 @@
 	u8 pktdelay_2ms;
 	/* reserved */
 	u8 reserved1;
-};
+} __attribute__ ((packed));
 
 /* RxPD Descriptor */
 struct rxpd {
@@ -63,7 +63,7 @@
 	/* Pkt Priority */
 	u8 priority;
 	u8 reserved[3];
-};
+} __attribute__ ((packed));
 
 struct cmd_header {
 	__le16 command;
@@ -97,7 +97,7 @@
 struct lbs_offset_value {
 	u32 offset;
 	u32 value;
-};
+} __attribute__ ((packed));
 
 /* Define general data structure */
 /* cmd_DS_GEN */
@@ -107,7 +107,7 @@
 	__le16 seqnum;
 	__le16 result;
 	void *cmdresp[0];
-};
+} __attribute__ ((packed));
 
 #define S_DS_GEN sizeof(struct cmd_ds_gen)
 
@@ -163,7 +163,7 @@
 	 * bump this up a bit.
 	 */
 	uint8_t tlv[128];
-};
+} __attribute__ ((packed));
 
 /*
  * This scan handle Country Information IE(802.11d compliant)
@@ -180,7 +180,7 @@
 	mrvlietypes_chanlistparamset_t ChanListParamSet;
 	mrvlietypes_ratesparamset_t OpRateSet;
 #endif
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_scan_rsp {
 	struct cmd_header hdr;
@@ -188,7 +188,7 @@
 	__le16 bssdescriptsize;
 	uint8_t nr_sets;
 	uint8_t bssdesc_and_tlvbuffer[0];
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_get_log {
 	struct cmd_header hdr;
@@ -206,33 +206,33 @@
 	__le32 fcserror;
 	__le32 txframe;
 	__le32 wepundecryptable;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_mac_control {
 	struct cmd_header hdr;
 	__le16 action;
 	u16 reserved;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_mac_multicast_adr {
 	struct cmd_header hdr;
 	__le16 action;
 	__le16 nr_of_adrs;
 	u8 maclist[ETH_ALEN * MRVDRV_MAX_MULTICAST_LIST_SIZE];
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_authenticate {
 	u8 macaddr[ETH_ALEN];
 	u8 authtype;
 	u8 reserved[10];
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_deauthenticate {
 	struct cmd_header hdr;
 
 	u8 macaddr[ETH_ALEN];
 	__le16 reasoncode;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_associate {
 	u8 peerstaaddr[6];
@@ -251,7 +251,7 @@
 
 struct cmd_ds_802_11_associate_rsp {
 	struct ieeetypes_assocrsp assocRsp;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_set_wep {
 	struct cmd_header hdr;
@@ -265,7 +265,7 @@
 	/* 40, 128bit or TXWEP */
 	uint8_t keytype[4];
 	uint8_t keymaterial[4][16];
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_3_get_stat {
 	__le32 xmitok;
@@ -274,7 +274,7 @@
 	__le32 rcverror;
 	__le32 rcvnobuffer;
 	__le32 rcvcrcerror;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_get_stat {
 	__le32 txfragmentcnt;
@@ -294,7 +294,7 @@
 	__le32 txbeacon;
 	__le32 rxbeacon;
 	__le32 wepundecryptable;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_snmp_mib {
 	struct cmd_header hdr;
@@ -303,58 +303,58 @@
 	__le16 oid;
 	__le16 bufsize;
 	u8 value[128];
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_mac_reg_map {
 	__le16 buffersize;
 	u8 regmap[128];
 	__le16 reserved;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_bbp_reg_map {
 	__le16 buffersize;
 	u8 regmap[128];
 	__le16 reserved;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_rf_reg_map {
 	__le16 buffersize;
 	u8 regmap[64];
 	__le16 reserved;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_mac_reg_access {
 	__le16 action;
 	__le16 offset;
 	__le32 value;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_bbp_reg_access {
 	__le16 action;
 	__le16 offset;
 	u8 value;
 	u8 reserved[3];
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_rf_reg_access {
 	__le16 action;
 	__le16 offset;
 	u8 value;
 	u8 reserved[3];
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_radio_control {
 	struct cmd_header hdr;
 
 	__le16 action;
 	__le16 control;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_beacon_control {
 	__le16 action;
 	__le16 beacon_enable;
 	__le16 beacon_period;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_sleep_params {
 	struct cmd_header hdr;
@@ -379,7 +379,7 @@
 
 	/* reserved field, should be set to zero */
 	__le16 reserved;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_inactivity_timeout {
 	struct cmd_header hdr;
@@ -389,7 +389,7 @@
 
 	/* Inactivity timeout in msec */
 	__le16 timeout;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_rf_channel {
 	struct cmd_header hdr;
@@ -399,7 +399,7 @@
 	__le16 rftype;      /* unused */
 	__le16 reserved;    /* unused */
 	u8 channellist[32]; /* unused */
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_rssi {
 	/* weighting factor */
@@ -408,21 +408,21 @@
 	__le16 reserved_0;
 	__le16 reserved_1;
 	__le16 reserved_2;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_rssi_rsp {
 	__le16 SNR;
 	__le16 noisefloor;
 	__le16 avgSNR;
 	__le16 avgnoisefloor;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_mac_address {
 	struct cmd_header hdr;
 
 	__le16 action;
 	u8 macadd[ETH_ALEN];
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_rf_tx_power {
 	struct cmd_header hdr;
@@ -431,7 +431,7 @@
 	__le16 curlevel;
 	s8 maxlevel;
 	s8 minlevel;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_rf_antenna {
 	__le16 action;
@@ -439,33 +439,33 @@
 	/* Number of antennas or 0xffff(diversity) */
 	__le16 antennamode;
 
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_monitor_mode {
 	__le16 action;
 	__le16 mode;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_set_boot2_ver {
 	struct cmd_header hdr;
 
 	__le16 action;
 	__le16 version;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_fw_wake_method {
 	struct cmd_header hdr;
 
 	__le16 action;
 	__le16 method;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_sleep_period {
 	struct cmd_header hdr;
 
 	__le16 action;
 	__le16 period;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_ps_mode {
 	__le16 action;
@@ -473,7 +473,7 @@
 	__le16 multipledtim;
 	__le16 reserved;
 	__le16 locallisteninterval;
-};
+} __attribute__ ((packed));
 
 struct cmd_confirm_sleep {
 	struct cmd_header hdr;
@@ -483,7 +483,7 @@
 	__le16 multipledtim;
 	__le16 reserved;
 	__le16 locallisteninterval;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_data_rate {
 	struct cmd_header hdr;
@@ -491,14 +491,14 @@
 	__le16 action;
 	__le16 reserved;
 	u8 rates[MAX_RATES];
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_rate_adapt_rateset {
 	struct cmd_header hdr;
 	__le16 action;
 	__le16 enablehwauto;
 	__le16 bitmap;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_ad_hoc_start {
 	struct cmd_header hdr;
@@ -520,7 +520,7 @@
 
 	u8 pad[3];
 	u8 bssid[ETH_ALEN];
-};
+} __attribute__ ((packed));
 
 struct adhoc_bssdesc {
 	u8 bssid[ETH_ALEN];
@@ -578,7 +578,7 @@
 
 	/* key material of size keylen */
 	u8 key[32];
-};
+} __attribute__ ((packed));
 
 #define MAX_WOL_RULES 		16
 
@@ -590,7 +590,7 @@
 	__le16 reserve;
 	__be32 sig_mask;
 	__be32 signature;
-};
+} __attribute__ ((packed));
 
 struct wol_config {
 	uint8_t action;
@@ -598,8 +598,7 @@
 	uint8_t no_rules_in_cmd;
 	uint8_t result;
 	struct host_wol_rule rule[MAX_WOL_RULES];
-};
-
+} __attribute__ ((packed));
 
 struct cmd_ds_host_sleep {
 	struct cmd_header hdr;
diff --git a/drivers/net/wireless/libertas_tf/main.c b/drivers/net/wireless/libertas_tf/main.c
index d1fc305..e7289e2 100644
--- a/drivers/net/wireless/libertas_tf/main.c
+++ b/drivers/net/wireless/libertas_tf/main.c
@@ -206,7 +206,7 @@
 	 * there are no buffered multicast frames to send
 	 */
 	ieee80211_stop_queues(priv->hw);
-	return 0;
+	return NETDEV_TX_OK;
 }
 
 static void lbtf_tx_work(struct work_struct *work)
diff --git a/drivers/net/wireless/orinoco/orinoco.c b/drivers/net/wireless/orinoco/orinoco.c
index bc84e27..45a04fa 100644
--- a/drivers/net/wireless/orinoco/orinoco.c
+++ b/drivers/net/wireless/orinoco/orinoco.c
@@ -1610,6 +1610,16 @@
 	struct orinoco_rx_data *rx_data, *temp;
 	struct hermes_rx_descriptor *desc;
 	struct sk_buff *skb;
+	unsigned long flags;
+
+	/* orinoco_rx requires the driver lock, and we also need to
+	 * protect priv->rx_list, so just hold the lock over the
+	 * lot.
+	 *
+	 * If orinoco_lock fails, we've unplugged the card. In this
+	 * case just abort. */
+	if (orinoco_lock(priv, &flags) != 0)
+		return;
 
 	/* extract desc and skb from queue */
 	list_for_each_entry_safe(rx_data, temp, &priv->rx_list, list) {
@@ -1622,6 +1632,8 @@
 
 		kfree(desc);
 	}
+
+	orinoco_unlock(priv, &flags);
 }
 
 /********************************************************************/
@@ -1661,7 +1673,7 @@
 		s = "UNKNOWN";
 	}
 	
-	printk(KERN_INFO "%s: New link status: %s (%04x)\n",
+	printk(KERN_DEBUG "%s: New link status: %s (%04x)\n",
 	       dev->name, s, status);
 }
 
@@ -3645,12 +3657,22 @@
 void free_orinocodev(struct net_device *dev)
 {
 	struct orinoco_private *priv = netdev_priv(dev);
+	struct orinoco_rx_data *rx_data, *temp;
 
-	/* No need to empty priv->rx_list: if the tasklet is scheduled
-	 * when we call tasklet_kill it will run one final time,
-	 * emptying the list */
+	/* If the tasklet is scheduled when we call tasklet_kill it
+	 * will run one final time. However the tasklet will only
+	 * drain priv->rx_list if the hw is still available. */
 	tasklet_kill(&priv->rx_tasklet);
 
+	/* Explicitly drain priv->rx_list */
+	list_for_each_entry_safe(rx_data, temp, &priv->rx_list, list) {
+		list_del(&rx_data->list);
+
+		dev_kfree_skb(rx_data->skb);
+		kfree(rx_data->desc);
+		kfree(rx_data);
+	}
+
 	unregister_pm_notifier(&priv->pm_notifier);
 	orinoco_uncache_fw(priv);
 
@@ -5046,33 +5068,30 @@
 	struct orinoco_private *priv = netdev_priv(dev);
 	u8 *buf;
 	unsigned long flags;
-	int err = 0;
 
 	/* cut off at IEEE80211_MAX_DATA_LEN */
 	if ((wrqu->data.length > IEEE80211_MAX_DATA_LEN) ||
 	    (wrqu->data.length && (extra == NULL)))
 		return -EINVAL;
 
-	if (orinoco_lock(priv, &flags) != 0)
-		return -EBUSY;
-
 	if (wrqu->data.length) {
 		buf = kmalloc(wrqu->data.length, GFP_KERNEL);
-		if (buf == NULL) {
-			err = -ENOMEM;
-			goto out;
-		}
+		if (buf == NULL)
+			return -ENOMEM;
 
 		memcpy(buf, extra, wrqu->data.length);
-		kfree(priv->wpa_ie);
-		priv->wpa_ie = buf;
-		priv->wpa_ie_len = wrqu->data.length;
-	} else {
-		kfree(priv->wpa_ie);
-		priv->wpa_ie = NULL;
-		priv->wpa_ie_len = 0;
+	} else
+		buf = NULL;
+
+	if (orinoco_lock(priv, &flags) != 0) {
+		kfree(buf);
+		return -EBUSY;
 	}
 
+	kfree(priv->wpa_ie);
+	priv->wpa_ie = buf;
+	priv->wpa_ie_len = wrqu->data.length;
+
 	if (priv->wpa_ie) {
 		/* Looks like wl_lkm wants to check the auth alg, and
 		 * somehow pass it to the firmware.
@@ -5081,9 +5100,8 @@
 		 */
 	}
 
-out:
 	orinoco_unlock(priv, &flags);
-	return err;
+	return 0;
 }
 
 static int orinoco_ioctl_get_genie(struct net_device *dev,
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index f127602..0b32215 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -435,6 +435,7 @@
 	PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */
 	PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), /* AirWay 802.11 Adapter (PCMCIA) */
 	PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), /* ARtem Onair */
+	PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0003), /* ARtem Onair Comcard 11 */
 	PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), /* Buffalo WLI-PCM-S11 */
 	PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */
 	PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index 82354b9..34561e6 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -138,6 +138,7 @@
 	u8 *fw_version = NULL;
 	size_t len;
 	int i;
+	int maxlen;
 
 	if (priv->rx_start)
 		return 0;
@@ -195,6 +196,16 @@
 			else
 				priv->rx_mtu = (size_t)
 					0x620 - priv->tx_hdr_len;
+			maxlen = priv->tx_hdr_len + /* USB devices */
+				 sizeof(struct p54_rx_data) +
+				 4 + /* rx alignment */
+				 IEEE80211_MAX_FRAG_THRESHOLD;
+			if (priv->rx_mtu > maxlen && PAGE_SIZE == 4096) {
+				printk(KERN_INFO "p54: rx_mtu reduced from %d "
+					         "to %d\n", priv->rx_mtu,
+						 maxlen);
+				priv->rx_mtu = maxlen;
+			}
 			break;
 			}
 		case BR_CODE_EXPOSED_IF:
@@ -440,8 +451,8 @@
 			}
 			if (err)
 				goto err;
-
-		}
+			}
+			break;
 		case PDR_PRISM_ZIF_TX_IQ_CALIBRATION:
 			priv->iq_autocal = kmalloc(data_len, GFP_KERNEL);
 			if (!priv->iq_autocal) {
@@ -575,6 +586,7 @@
 	u16 freq = le16_to_cpu(hdr->freq);
 	size_t header_len = sizeof(*hdr);
 	u32 tsf32;
+	u8 rate = hdr->rate & 0xf;
 
 	/*
 	 * If the device is in a unspecified state we have to
@@ -603,8 +615,11 @@
 	rx_status.qual = (100 * hdr->rssi) / 127;
 	if (hdr->rate & 0x10)
 		rx_status.flag |= RX_FLAG_SHORTPRE;
-	rx_status.rate_idx = (dev->conf.channel->band == IEEE80211_BAND_2GHZ ?
-			hdr->rate : (hdr->rate - 4)) & 0xf;
+	if (dev->conf.channel->band == IEEE80211_BAND_5GHZ)
+		rx_status.rate_idx = (rate < 4) ? 0 : rate - 4;
+	else
+		rx_status.rate_idx = rate;
+
 	rx_status.freq = freq;
 	rx_status.band =  dev->conf.channel->band;
 	rx_status.antenna = hdr->antenna;
@@ -730,7 +745,7 @@
 		struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry);
 		struct p54_hdr *entry_hdr;
 		struct p54_tx_data *entry_data;
-		int pad = 0;
+		unsigned int pad = 0, frame_len;
 
 		range = (void *)info->rate_driver_data;
 		if (range->start_addr != addr) {
@@ -753,6 +768,7 @@
 		__skb_unlink(entry, &priv->tx_queue);
 		spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
 
+		frame_len = entry->len;
 		entry_hdr = (struct p54_hdr *) entry->data;
 		entry_data = (struct p54_tx_data *) entry_hdr->data;
 		priv->tx_stats[entry_data->hw_queue].len--;
@@ -798,6 +814,29 @@
 			info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
 		info->status.ack_signal = p54_rssi_to_dbm(dev,
 				(int)payload->ack_rssi);
+
+		/* Undo all changes to the frame. */
+		switch (entry_data->key_type) {
+		case P54_CRYPTO_TKIPMICHAEL: {
+			u8 *iv = (u8 *)(entry_data->align + pad +
+					entry_data->crypt_offset);
+
+			/* Restore the original TKIP IV. */
+			iv[2] = iv[0];
+			iv[0] = iv[1];
+			iv[1] = (iv[0] | 0x20) & 0x7f;	/* WEPSeed - 8.3.2.2 */
+
+			frame_len -= 12; /* remove TKIP_MMIC + TKIP_ICV */
+			break;
+			}
+		case P54_CRYPTO_AESCCMP:
+			frame_len -= 8; /* remove CCMP_MIC */
+			break;
+		case P54_CRYPTO_WEP:
+			frame_len -= 4; /* remove WEP_ICV */
+			break;
+		}
+		skb_trim(entry, frame_len);
 		skb_pull(entry, sizeof(*hdr) + pad + sizeof(*entry_data));
 		ieee80211_tx_status_irqsafe(dev, entry);
 		goto out;
@@ -1122,7 +1161,7 @@
 
 	skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL_OPSET,
 		      sizeof(struct p54_hdr) + sizeof(*tim),
-		      P54_CONTROL_TYPE_TIM, GFP_KERNEL);
+		      P54_CONTROL_TYPE_TIM, GFP_ATOMIC);
 	if (!skb)
 		return -ENOMEM;
 
@@ -1383,7 +1422,6 @@
 	hdr->tries = ridx;
 	txhdr->rts_rate_idx = 0;
 	if (info->control.hw_key) {
-		crypt_offset += info->control.hw_key->iv_len;
 		txhdr->key_type = p54_convert_algo(info->control.hw_key->alg);
 		txhdr->key_len = min((u8)16, info->control.hw_key->keylen);
 		memcpy(txhdr->key, info->control.hw_key->key, txhdr->key_len);
@@ -1397,6 +1435,8 @@
 		}
 		/* reserve some space for ICV */
 		len += info->control.hw_key->icv_len;
+		memset(skb_put(skb, info->control.hw_key->icv_len), 0,
+		       info->control.hw_key->icv_len);
 	} else {
 		txhdr->key_type = 0;
 		txhdr->key_len = 0;
@@ -1584,7 +1624,7 @@
 
  err:
 	printk(KERN_ERR "%s: frequency change failed\n", wiphy_name(dev->wiphy));
-	kfree_skb(skb);
+	p54_free_skb(dev, skb);
 	return -EINVAL;
 }
 
@@ -1824,7 +1864,7 @@
 
 static int p54_config(struct ieee80211_hw *dev, u32 changed)
 {
-	int ret;
+	int ret = 0;
 	struct p54_common *priv = dev->priv;
 	struct ieee80211_conf *conf = &dev->conf;
 
@@ -2051,7 +2091,7 @@
 			algo = P54_CRYPTO_AESCCMP;
 			break;
 		default:
-			return -EINVAL;
+			return -EOPNOTSUPP;
 		}
 	}
 
diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index c44a200..5de2ebf 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -56,6 +56,7 @@
 	{USB_DEVICE(0x050d, 0x7050)},	/* Belkin F5D7050 ver 1000 */
 	{USB_DEVICE(0x0572, 0x2000)},	/* Cohiba Proto board */
 	{USB_DEVICE(0x0572, 0x2002)},	/* Cohiba Proto board */
+	{USB_DEVICE(0x06b9, 0x0121)},	/* Thomson SpeedTouch 121g */
 	{USB_DEVICE(0x0707, 0xee13)},   /* SMC 2862W-G version 2 */
 	{USB_DEVICE(0x083a, 0x4521)},   /* Siemens Gigaset USB Adapter 54 version 2 */
 	{USB_DEVICE(0x0846, 0x4240)},	/* Netgear WG111 (v2) */
@@ -143,11 +144,8 @@
 	struct sk_buff *skb = urb->context;
 	struct ieee80211_hw *dev = (struct ieee80211_hw *)
 		usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
-	struct p54u_priv *priv = dev->priv;
 
-	skb_pull(skb, priv->common.tx_hdr_len);
-	if (FREE_AFTER_TX(skb))
-		p54_free_skb(dev, skb);
+	p54_free_skb(dev, skb);
 }
 
 static void p54u_tx_dummy_cb(struct urb *urb) { }
@@ -229,7 +227,10 @@
 			  p54u_tx_dummy_cb, dev);
 	usb_fill_bulk_urb(data_urb, priv->udev,
 			  usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA),
-			  skb->data, skb->len, p54u_tx_cb, skb);
+			  skb->data, skb->len, FREE_AFTER_TX(skb) ?
+			  p54u_tx_cb : p54u_tx_dummy_cb, skb);
+	addr_urb->transfer_flags |= URB_ZERO_PACKET;
+	data_urb->transfer_flags |= URB_ZERO_PACKET;
 
 	usb_anchor_urb(addr_urb, &priv->submitted);
 	err = usb_submit_urb(addr_urb, GFP_ATOMIC);
@@ -238,7 +239,7 @@
 		goto out;
 	}
 
-	usb_anchor_urb(addr_urb, &priv->submitted);
+	usb_anchor_urb(data_urb, &priv->submitted);
 	err = usb_submit_urb(data_urb, GFP_ATOMIC);
 	if (err)
 		usb_unanchor_urb(data_urb);
@@ -268,27 +269,24 @@
 {
 	struct p54u_priv *priv = dev->priv;
 	struct urb *data_urb;
-	struct lm87_tx_hdr *hdr;
-	__le32 checksum;
-	__le32 addr = ((struct p54_hdr *)skb->data)->req_id;
+	struct lm87_tx_hdr *hdr = (void *)skb->data - sizeof(*hdr);
 
 	data_urb = usb_alloc_urb(0, GFP_ATOMIC);
 	if (!data_urb)
 		return;
 
-	checksum = p54u_lm87_chksum((__le32 *)skb->data, skb->len);
-	hdr = (struct lm87_tx_hdr *)skb_push(skb, sizeof(*hdr));
-	hdr->chksum = checksum;
-	hdr->device_addr = addr;
+	hdr->chksum = p54u_lm87_chksum((__le32 *)skb->data, skb->len);
+	hdr->device_addr = ((struct p54_hdr *)skb->data)->req_id;
 
 	usb_fill_bulk_urb(data_urb, priv->udev,
 			  usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA),
-			  skb->data, skb->len, p54u_tx_cb, skb);
+			  hdr, skb->len + sizeof(*hdr),  FREE_AFTER_TX(skb) ?
+			  p54u_tx_cb : p54u_tx_dummy_cb, skb);
+	data_urb->transfer_flags |= URB_ZERO_PACKET;
 
 	usb_anchor_urb(data_urb, &priv->submitted);
 	if (usb_submit_urb(data_urb, GFP_ATOMIC)) {
 		usb_unanchor_urb(data_urb);
-		skb_pull(skb, sizeof(*hdr));
 		p54_free_skb(dev, skb);
 	}
 	usb_free_urb(data_urb);
@@ -298,11 +296,9 @@
 {
 	struct p54u_priv *priv = dev->priv;
 	struct urb *int_urb, *data_urb;
-	struct net2280_tx_hdr *hdr;
+	struct net2280_tx_hdr *hdr = (void *)skb->data - sizeof(*hdr);
 	struct net2280_reg_write *reg;
 	int err = 0;
-	__le32 addr = ((struct p54_hdr *) skb->data)->req_id;
-	__le16 len = cpu_to_le16(skb->len);
 
 	reg = kmalloc(sizeof(*reg), GFP_ATOMIC);
 	if (!reg)
@@ -325,10 +321,9 @@
 	reg->addr = cpu_to_le32(P54U_DEV_BASE);
 	reg->val = cpu_to_le32(ISL38XX_DEV_INT_DATA);
 
-	hdr = (void *)skb_push(skb, sizeof(*hdr));
 	memset(hdr, 0, sizeof(*hdr));
-	hdr->len = len;
-	hdr->device_addr = addr;
+	hdr->len = cpu_to_le16(skb->len);
+	hdr->device_addr = ((struct p54_hdr *) skb->data)->req_id;
 
 	usb_fill_bulk_urb(int_urb, priv->udev,
 		usb_sndbulkpipe(priv->udev, P54U_PIPE_DEV), reg, sizeof(*reg),
@@ -339,11 +334,13 @@
 	 * free what's inside the transfer_buffer after the callback routine
 	 * has completed.
 	 */
-	int_urb->transfer_flags |= URB_FREE_BUFFER;
+	int_urb->transfer_flags |= URB_FREE_BUFFER | URB_ZERO_PACKET;
 
 	usb_fill_bulk_urb(data_urb, priv->udev,
 			  usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA),
-			  skb->data, skb->len, p54u_tx_cb, skb);
+			  hdr, skb->len + sizeof(*hdr), FREE_AFTER_TX(skb) ?
+			  p54u_tx_cb : p54u_tx_dummy_cb, skb);
+	data_urb->transfer_flags |= URB_ZERO_PACKET;
 
 	usb_anchor_urb(int_urb, &priv->submitted);
 	err = usb_submit_urb(int_urb, GFP_ATOMIC);
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index 607ce9f..ed93ac4 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -1649,9 +1649,7 @@
 				  char *end_buf,
 				  struct ndis_80211_bssid_ex *bssid)
 {
-#ifdef DEBUG
 	struct usbnet *usbdev = netdev_priv(dev);
-#endif
 	u8 *ie;
 	char *current_val;
 	int bssid_len, ie_len, i;
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 30028e2..af6b584 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -38,7 +38,7 @@
 /*
  * Allow hardware encryption to be disabled.
  */
-static int modparam_nohwcrypt = 1;
+static int modparam_nohwcrypt = 0;
 module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
 
@@ -376,11 +376,11 @@
 
 		/*
 		 * The driver does not support the IV/EIV generation
-		 * in hardware. However it doesn't support the IV/EIV
-		 * inside the ieee80211 frame either, but requires it
-		 * to be provided seperately for the descriptor.
-		 * rt2x00lib will cut the IV/EIV data out of all frames
-		 * given to us by mac80211, but we must tell mac80211
+		 * in hardware. However it demands the data to be provided
+		 * both seperately as well as inside the frame.
+		 * We already provided the CONFIG_CRYPTO_COPY_IV to rt2x00lib
+		 * to ensure rt2x00lib will not strip the data from the
+		 * frame after the copy, now we must tell mac80211
 		 * to generate the IV/EIV data.
 		 */
 		key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
@@ -1181,7 +1181,7 @@
 			   test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags));
 	rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
 	rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len);
-	rt2x00_set_field32(&word, TXD_W0_CIPHER, txdesc->cipher);
+	rt2x00_set_field32(&word, TXD_W0_CIPHER, !!txdesc->cipher);
 	rt2x00_set_field32(&word, TXD_W0_KEY_ID, txdesc->key_idx);
 	rt2x00_desc_write(txd, 0, word);
 }
@@ -1334,14 +1334,7 @@
 
 		/* ICV is located at the end of frame */
 
-		/*
-		 * Hardware has stripped IV/EIV data from 802.11 frame during
-		 * decryption. It has provided the data seperately but rt2x00lib
-		 * should decide if it should be reinserted.
-		 */
-		rxdesc->flags |= RX_FLAG_IV_STRIPPED;
-		if (rxdesc->cipher != CIPHER_TKIP)
-			rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
+		rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
 		if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
 			rxdesc->flags |= RX_FLAG_DECRYPTED;
 		else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 6d92542..87c0f2c 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -807,13 +807,11 @@
 {
 	entry->flags = 0;
 	entry->bitrate = rate->bitrate;
-	entry->hw_value = rt2x00_create_rate_hw_value(index, 0);
-	entry->hw_value_short = entry->hw_value;
+	entry->hw_value =index;
+	entry->hw_value_short = index;
 
-	if (rate->flags & DEV_RATE_SHORT_PREAMBLE) {
+	if (rate->flags & DEV_RATE_SHORT_PREAMBLE)
 		entry->flags |= IEEE80211_RATE_SHORT_PREAMBLE;
-		entry->hw_value_short |= rt2x00_create_rate_hw_value(index, 1);
-	}
 }
 
 static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
diff --git a/drivers/net/wireless/rt2x00/rt2x00leds.c b/drivers/net/wireless/rt2x00/rt2x00leds.c
index 68f4e0fc..a0cd35b 100644
--- a/drivers/net/wireless/rt2x00/rt2x00leds.c
+++ b/drivers/net/wireless/rt2x00/rt2x00leds.c
@@ -97,7 +97,7 @@
 
 void rt2x00leds_led_radio(struct rt2x00_dev *rt2x00dev, bool enabled)
 {
-	if (rt2x00dev->led_radio.type == LED_TYPE_ASSOC)
+	if (rt2x00dev->led_radio.type == LED_TYPE_RADIO)
 		rt2x00led_led_simple(&rt2x00dev->led_radio, enabled);
 }
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index 0302432..86cd26f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -52,22 +52,11 @@
 
 extern const struct rt2x00_rate rt2x00_supported_rates[12];
 
-static inline u16 rt2x00_create_rate_hw_value(const u16 index,
-					      const u16 short_preamble)
-{
-	return (short_preamble << 8) | (index & 0xff);
-}
-
 static inline const struct rt2x00_rate *rt2x00_get_rate(const u16 hw_value)
 {
 	return &rt2x00_supported_rates[hw_value & 0xff];
 }
 
-static inline int rt2x00_get_rate_preamble(const u16 hw_value)
-{
-	return (hw_value & 0xff00);
-}
-
 /*
  * Radio control handlers.
  */
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index eaec6bd9..0709dec 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -154,6 +154,7 @@
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data;
+	struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0];
 	struct ieee80211_rate *rate =
 	    ieee80211_get_tx_rate(rt2x00dev->hw, tx_info);
 	const struct rt2x00_rate *hwrate;
@@ -313,7 +314,7 @@
 		 * When preamble is enabled we should set the
 		 * preamble bit for the signal.
 		 */
-		if (rt2x00_get_rate_preamble(rate->hw_value))
+		if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
 			txdesc->signal |= 0x08;
 	}
 }
diff --git a/drivers/net/wireless/rt2x00/rt2x00rfkill.c b/drivers/net/wireless/rt2x00/rt2x00rfkill.c
index c3f53a9..3298cae 100644
--- a/drivers/net/wireless/rt2x00/rt2x00rfkill.c
+++ b/drivers/net/wireless/rt2x00/rt2x00rfkill.c
@@ -162,7 +162,7 @@
 
 void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev)
 {
-	if (!test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->flags))
+	if (!test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state))
 		return;
 
 	cancel_delayed_work_sync(&rt2x00dev->rfkill_work);
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index 83df312..0b29d76 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -434,11 +434,11 @@
 
 		if (usb_endpoint_is_bulk_in(ep_desc)) {
 			rt2x00usb_assign_endpoint(rt2x00dev->rx, ep_desc);
-		} else if (usb_endpoint_is_bulk_out(ep_desc)) {
+		} else if (usb_endpoint_is_bulk_out(ep_desc) &&
+			   (queue != queue_end(rt2x00dev))) {
 			rt2x00usb_assign_endpoint(queue, ep_desc);
+			queue = queue_next(queue);
 
-			if (queue != queue_end(rt2x00dev))
-				queue = queue_next(queue);
 			tx_ep_desc = ep_desc;
 		}
 	}
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index d638a8a..96a8d69 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2321,6 +2321,7 @@
 	/* Linksys */
 	{ USB_DEVICE(0x13b1, 0x0020), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x13b1, 0x0023), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x13b1, 0x0028), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* MSI */
 	{ USB_DEVICE(0x0db0, 0x6877), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x0db0, 0x6874), USB_DEVICE_DATA(&rt73usb_ops) },
diff --git a/drivers/net/wireless/rtl818x/rtl8180_dev.c b/drivers/net/wireless/rtl818x/rtl8180_dev.c
index 5f887fb..387c133 100644
--- a/drivers/net/wireless/rtl818x/rtl8180_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180_dev.c
@@ -897,6 +897,7 @@
 	dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
 		     IEEE80211_HW_RX_INCLUDES_FCS |
 		     IEEE80211_HW_SIGNAL_UNSPEC;
+	dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
 	dev->queues = 1;
 	dev->max_signal = 65;
 
diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c
index 00ce3ef..22bc07e 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c
@@ -213,7 +213,7 @@
 	urb = usb_alloc_urb(0, GFP_ATOMIC);
 	if (!urb) {
 		kfree_skb(skb);
-		return -ENOMEM;
+		return NETDEV_TX_OK;
 	}
 
 	flags = skb->len;
@@ -273,6 +273,7 @@
 
 	usb_fill_bulk_urb(urb, priv->udev, usb_sndbulkpipe(priv->udev, ep),
 			  buf, skb->len, rtl8187_tx_cb, skb);
+	urb->transfer_flags |= URB_ZERO_PACKET;
 	usb_anchor_urb(urb, &priv->anchored);
 	rc = usb_submit_urb(urb, GFP_ATOMIC);
 	if (rc < 0) {
@@ -281,7 +282,7 @@
 	}
 	usb_free_urb(urb);
 
-	return rc;
+	return NETDEV_TX_OK;
 }
 
 static void rtl8187_rx_cb(struct urb *urb)
@@ -1471,6 +1472,7 @@
 	ieee80211_unregister_hw(dev);
 
 	priv = dev->priv;
+	usb_reset_device(priv->udev);
 	usb_put_dev(interface_to_usbdev(intf));
 	ieee80211_free_hw(dev);
 }
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index b5db57d..17527f7 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -84,6 +84,7 @@
 	{ USB_DEVICE(0x0586, 0x340a), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x0471, 0x1237), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x07fa, 0x1196), .driver_info = DEVICE_ZD1211B },
+	{ USB_DEVICE(0x0df6, 0x0036), .driver_info = DEVICE_ZD1211B },
 	/* "Driverless" devices that need ejecting */
 	{ USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER },
 	{ USB_DEVICE(0x0ace, 0x20ff), .driver_info = DEVICE_INSTALLER },
diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c
index e1b0ad6..fa65a2b 100644
--- a/drivers/of/of_i2c.c
+++ b/drivers/of/of_i2c.c
@@ -66,4 +66,23 @@
 }
 EXPORT_SYMBOL(of_register_i2c_devices);
 
+static int of_dev_node_match(struct device *dev, void *data)
+{
+        return dev_archdata_get_node(&dev->archdata) == data;
+}
+
+/* must call put_device() when done with returned i2c_client device */
+struct i2c_client *of_find_i2c_device_by_node(struct device_node *node)
+{
+	struct device *dev;
+
+	dev = bus_find_device(&i2c_bus_type, NULL, node,
+					 of_dev_node_match);
+	if (!dev)
+		return NULL;
+
+	return to_i2c_client(dev);
+}
+EXPORT_SYMBOL(of_find_i2c_device_by_node);
+
 MODULE_LICENSE("GPL");
diff --git a/drivers/oprofile/cpu_buffer.c b/drivers/oprofile/cpu_buffer.c
index 2e03b6d..e76d715 100644
--- a/drivers/oprofile/cpu_buffer.c
+++ b/drivers/oprofile/cpu_buffer.c
@@ -393,16 +393,21 @@
 	return;
 
 fail:
+	entry->event = NULL;
 	cpu_buf->sample_lost_overflow++;
 }
 
 int oprofile_add_data(struct op_entry *entry, unsigned long val)
 {
+	if (!entry->event)
+		return 0;
 	return op_cpu_buffer_add_data(entry, val);
 }
 
 int oprofile_write_commit(struct op_entry *entry)
 {
+	if (!entry->event)
+		return -EINVAL;
 	return op_cpu_buffer_write_commit(entry);
 }
 
diff --git a/drivers/oprofile/cpu_buffer.h b/drivers/oprofile/cpu_buffer.h
index 63f81c4..272995d 100644
--- a/drivers/oprofile/cpu_buffer.h
+++ b/drivers/oprofile/cpu_buffer.h
@@ -66,6 +66,13 @@
 	cpu_buf->last_task = NULL;
 }
 
+/*
+ * op_cpu_buffer_add_data() and op_cpu_buffer_write_commit() may be
+ * called only if op_cpu_buffer_write_reserve() did not return NULL or
+ * entry->event != NULL, otherwise entry->size or entry->event will be
+ * used uninitialized.
+ */
+
 struct op_sample
 *op_cpu_buffer_write_reserve(struct op_entry *entry, unsigned long size);
 int op_cpu_buffer_write_commit(struct op_entry *entry);
diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c
index 1e93c83..4fa3bb2 100644
--- a/drivers/parisc/superio.c
+++ b/drivers/parisc/superio.c
@@ -405,7 +405,6 @@
 	serial_port.type	= PORT_16550A;
 	serial_port.uartclk	= 115200*16;
 	serial_port.fifosize	= 16;
-	spin_lock_init(&serial_port.lock);
 
 	/* serial port #1 */
 	serial_port.iobase	= sio_dev.sp1_base;
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index f09b101..803d9dd 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -266,6 +266,8 @@
 	int found = acpi_pci_detect_ejectable(pbus);
 	if (!found) {
 		acpi_handle bridge_handle = acpi_pci_get_bridge_handle(pbus);
+		if (!bridge_handle)
+			return 0;
 		acpi_walk_namespace(ACPI_TYPE_DEVICE, bridge_handle, (u32)1,
 				    is_pci_dock_device, (void *)&found, NULL);
 	}
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index 5482d4e..c248554 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -126,8 +126,10 @@
 	mutex_lock(&slot->ctrl->crit_sect);
 
 	/* has it been >1 sec since our last toggle? */
-	if ((get_seconds() - slot->last_emi_toggle) < 1)
+	if ((get_seconds() - slot->last_emi_toggle) < 1) {
+		mutex_unlock(&slot->ctrl->crit_sect);
 		return -EINVAL;
+	}
 
 	/* see what our current state is */
 	retval = get_lock_status(hotplug_slot, &value);
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index 235fb7a..3dfecb2 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -438,7 +438,8 @@
 			continue;
 
 		for (i = 0; i < drhd->devices_cnt; i++)
-			if (drhd->devices[i]->bus->number == bus &&
+			if (drhd->devices[i] &&
+			    drhd->devices[i]->bus->number == bus &&
 			    drhd->devices[i]->devfn == devfn)
 				return drhd->iommu;
 
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index b4a90ba..896a15d 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -398,21 +398,19 @@
 	entry->msi_attrib.masked = 1;
 	entry->msi_attrib.default_irq = dev->irq;	/* Save IOAPIC IRQ */
 	entry->msi_attrib.pos = pos;
-	if (entry->msi_attrib.maskbit) {
-		entry->mask_base = (void __iomem *)(long)msi_mask_bits_reg(pos,
-				entry->msi_attrib.is_64);
-	}
 	entry->dev = dev;
 	if (entry->msi_attrib.maskbit) {
-		unsigned int maskbits, temp;
+		unsigned int base, maskbits, temp;
+
+		base = msi_mask_bits_reg(pos, entry->msi_attrib.is_64);
+		entry->mask_base = (void __iomem *)(long)base;
+
 		/* All MSIs are unmasked by default, Mask them all */
-		pci_read_config_dword(dev,
-			msi_mask_bits_reg(pos, entry->msi_attrib.is_64),
-			&maskbits);
+		pci_read_config_dword(dev, base, &maskbits);
 		temp = (1 << multi_msi_capable(control));
 		temp = ((temp - 1) & ~temp);
 		maskbits |= temp;
-		pci_write_config_dword(dev, entry->msi_attrib.is_64, maskbits);
+		pci_write_config_dword(dev, base, maskbits);
 		entry->msi_attrib.maskbits_mask = temp;
 	}
 	list_add_tail(&entry->list, &dev->msi_list);
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index c697f26..9de07b7 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -355,17 +355,27 @@
 	int i = 0;
 
 	if (drv && drv->suspend) {
+		pci_dev->state_saved = false;
+
 		i = drv->suspend(pci_dev, state);
 		suspend_report_result(drv->suspend, i);
-	} else {
-		pci_save_state(pci_dev);
-		/*
-		 * This is for compatibility with existing code with legacy PM
-		 * support.
-		 */
-		pci_pm_set_unknown_state(pci_dev);
+		if (i)
+			return i;
+
+		if (pci_dev->state_saved)
+			goto Fixup;
+
+		if (WARN_ON_ONCE(pci_dev->current_state != PCI_D0))
+			goto Fixup;
 	}
 
+	pci_save_state(pci_dev);
+	/*
+	 * This is for compatibility with existing code with legacy PM support.
+	 */
+	pci_pm_set_unknown_state(pci_dev);
+
+ Fixup:
 	pci_fixup_device(pci_fixup_suspend, pci_dev);
 
 	return i;
@@ -386,81 +396,34 @@
 
 static int pci_legacy_resume_early(struct device *dev)
 {
-	int error = 0;
 	struct pci_dev * pci_dev = to_pci_dev(dev);
 	struct pci_driver * drv = pci_dev->driver;
 
-	pci_fixup_device(pci_fixup_resume_early, pci_dev);
-
-	if (drv && drv->resume_early)
-		error = drv->resume_early(pci_dev);
-	return error;
+	return drv && drv->resume_early ?
+			drv->resume_early(pci_dev) : 0;
 }
 
 static int pci_legacy_resume(struct device *dev)
 {
-	int error;
 	struct pci_dev * pci_dev = to_pci_dev(dev);
 	struct pci_driver * drv = pci_dev->driver;
 
 	pci_fixup_device(pci_fixup_resume, pci_dev);
 
-	if (drv && drv->resume) {
-		error = drv->resume(pci_dev);
-	} else {
-		/* restore the PCI config space */
-		pci_restore_state(pci_dev);
-		error = pci_pm_reenable_device(pci_dev);
-	}
-	return error;
+	return drv && drv->resume ?
+			drv->resume(pci_dev) : pci_pm_reenable_device(pci_dev);
 }
 
 /* Auxiliary functions used by the new power management framework */
 
-static int pci_restore_standard_config(struct pci_dev *pci_dev)
-{
-	struct pci_dev *parent = pci_dev->bus->self;
-	int error = 0;
-
-	/* Check if the device's bus is operational */
-	if (!parent || parent->current_state == PCI_D0) {
-		pci_restore_state(pci_dev);
-		pci_update_current_state(pci_dev, PCI_D0);
-	} else {
-		dev_warn(&pci_dev->dev, "unable to restore config, "
-			"bridge %s in low power state D%d\n", pci_name(parent),
-			parent->current_state);
-		pci_dev->current_state = PCI_UNKNOWN;
-		error = -EAGAIN;
-	}
-
-	return error;
-}
-
-static bool pci_is_bridge(struct pci_dev *pci_dev)
-{
-	return !!(pci_dev->subordinate);
-}
-
 static void pci_pm_default_resume_noirq(struct pci_dev *pci_dev)
 {
-	if (pci_restore_standard_config(pci_dev))
-		pci_fixup_device(pci_fixup_resume_early, pci_dev);
+	pci_restore_standard_config(pci_dev);
+	pci_fixup_device(pci_fixup_resume_early, pci_dev);
 }
 
 static int pci_pm_default_resume(struct pci_dev *pci_dev)
 {
-	/*
-	 * pci_restore_standard_config() should have been called once already,
-	 * but it would have failed if the device's parent bridge had not been
-	 * in power state D0 at that time.  Check it and try again if necessary.
-	 */
-	if (pci_dev->current_state == PCI_UNKNOWN) {
-		int error = pci_restore_standard_config(pci_dev);
-		if (error)
-			return error;
-	}
-
 	pci_fixup_device(pci_fixup_resume, pci_dev);
 
 	if (!pci_is_bridge(pci_dev))
@@ -575,11 +538,11 @@
 	struct device_driver *drv = dev->driver;
 	int error = 0;
 
+	pci_pm_default_resume_noirq(pci_dev);
+
 	if (pci_has_legacy_pm_support(pci_dev))
 		return pci_legacy_resume_early(dev);
 
-	pci_pm_default_resume_noirq(pci_dev);
-
 	if (drv && drv->pm && drv->pm->resume_noirq)
 		error = drv->pm->resume_noirq(dev);
 
@@ -730,11 +693,11 @@
 	struct device_driver *drv = dev->driver;
 	int error = 0;
 
+	pci_pm_default_resume_noirq(pci_dev);
+
 	if (pci_has_legacy_pm_support(pci_dev))
 		return pci_legacy_resume_early(dev);
 
-	pci_pm_default_resume_noirq(pci_dev);
-
 	if (drv && drv->pm && drv->pm->restore_noirq)
 		error = drv->pm->restore_noirq(dev);
 
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index c12f6c7..17bd9325 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -22,7 +22,7 @@
 #include <asm/dma.h>	/* isa_dma_bridge_buggy */
 #include "pci.h"
 
-unsigned int pci_pm_d3_delay = 10;
+unsigned int pci_pm_d3_delay = PCI_PM_D3_WAIT;
 
 #ifdef CONFIG_PCI_DOMAINS
 int pci_domains_supported = 1;
@@ -426,6 +426,7 @@
  *                           given PCI device
  * @dev: PCI device to handle.
  * @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
+ * @wait: If 'true', wait for the device to change its power state
  *
  * RETURN VALUE:
  * -EINVAL if the requested state is invalid.
@@ -435,7 +436,7 @@
  * 0 if device's power state has been successfully changed.
  */
 static int
-pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
+pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state, bool wait)
 {
 	u16 pmcsr;
 	bool need_restore = false;
@@ -480,8 +481,10 @@
 		break;
 	case PCI_UNKNOWN: /* Boot-up */
 		if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot
-		 && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET))
+		 && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET)) {
 			need_restore = true;
+			wait = true;
+		}
 		/* Fall-through: force to D0 */
 	default:
 		pmcsr = 0;
@@ -491,12 +494,15 @@
 	/* enter specified state */
 	pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr);
 
+	if (!wait)
+		return 0;
+
 	/* Mandatory power management transition delays */
 	/* see PCI PM 1.1 5.6.1 table 18 */
 	if (state == PCI_D3hot || dev->current_state == PCI_D3hot)
 		msleep(pci_pm_d3_delay);
 	else if (state == PCI_D2 || dev->current_state == PCI_D2)
-		udelay(200);
+		udelay(PCI_PM_D2_DELAY);
 
 	dev->current_state = state;
 
@@ -515,7 +521,7 @@
 	if (need_restore)
 		pci_restore_bars(dev);
 
-	if (dev->bus->self)
+	if (wait && dev->bus->self)
 		pcie_aspm_pm_state_change(dev->bus->self);
 
 	return 0;
@@ -585,7 +591,7 @@
 	if (state == PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3))
 		return 0;
 
-	error = pci_raw_set_power_state(dev, state);
+	error = pci_raw_set_power_state(dev, state, true);
 
 	if (state > PCI_D0 && platform_pci_power_manageable(dev)) {
 		/* Allow the platform to finalize the transition */
@@ -730,6 +736,7 @@
 	/* XXX: 100% dword access ok here? */
 	for (i = 0; i < 16; i++)
 		pci_read_config_dword(dev, i * 4,&dev->saved_config_space[i]);
+	dev->state_saved = true;
 	if ((i = pci_save_pcie_state(dev)) != 0)
 		return i;
 	if ((i = pci_save_pcix_state(dev)) != 0)
@@ -1260,15 +1267,14 @@
 	/* find PCI PM capability in list */
 	pm = pci_find_capability(dev, PCI_CAP_ID_PM);
 	if (!pm)
-		goto Exit;
-
+		return;
 	/* Check device's ability to generate PME# */
 	pci_read_config_word(dev, pm + PCI_PM_PMC, &pmc);
 
 	if ((pmc & PCI_PM_CAP_VER_MASK) > 3) {
 		dev_err(&dev->dev, "unsupported PM cap regs version (%u)\n",
 			pmc & PCI_PM_CAP_VER_MASK);
-		goto Exit;
+		return;
 	}
 
 	dev->pm_cap = pm;
@@ -1307,9 +1313,6 @@
 	} else {
 		dev->pme_support = 0;
 	}
-
- Exit:
-	pci_update_current_state(dev, PCI_D0);
 }
 
 /**
@@ -1378,6 +1381,50 @@
 }
 
 /**
+ * pci_restore_standard_config - restore standard config registers of PCI device
+ * @dev: PCI device to handle
+ *
+ * This function assumes that the device's configuration space is accessible.
+ * If the device needs to be powered up, the function will wait for it to
+ * change the state.
+ */
+int pci_restore_standard_config(struct pci_dev *dev)
+{
+	pci_power_t prev_state;
+	int error;
+
+	pci_restore_state(dev);
+	pci_update_current_state(dev, PCI_D0);
+
+	prev_state = dev->current_state;
+	if (prev_state == PCI_D0)
+		return 0;
+
+	error = pci_raw_set_power_state(dev, PCI_D0, false);
+	if (error)
+		return error;
+
+	if (pci_is_bridge(dev)) {
+		if (prev_state > PCI_D1)
+			mdelay(PCI_PM_BUS_WAIT);
+	} else {
+		switch(prev_state) {
+		case PCI_D3cold:
+		case PCI_D3hot:
+			mdelay(pci_pm_d3_delay);
+			break;
+		case PCI_D2:
+			udelay(PCI_PM_D2_DELAY);
+			break;
+		}
+	}
+
+	dev->current_state = PCI_D0;
+
+	return 0;
+}
+
+/**
  * pci_enable_ari - enable ARI forwarding if hardware support it
  * @dev: the PCI device
  */
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 1351bb4..26ddf78a 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -49,6 +49,12 @@
 extern void pci_pm_init(struct pci_dev *dev);
 extern void platform_pci_wakeup_init(struct pci_dev *dev);
 extern void pci_allocate_cap_save_buffers(struct pci_dev *dev);
+extern int pci_restore_standard_config(struct pci_dev *dev);
+
+static inline bool pci_is_bridge(struct pci_dev *pci_dev)
+{
+	return !!(pci_dev->subordinate);
+}
 
 extern int pci_user_read_config_byte(struct pci_dev *dev, int where, u8 *val);
 extern int pci_user_read_config_word(struct pci_dev *dev, int where, u16 *val);
diff --git a/drivers/pci/syscall.c b/drivers/pci/syscall.c
index 645d7a6..ec22284 100644
--- a/drivers/pci/syscall.c
+++ b/drivers/pci/syscall.c
@@ -14,10 +14,8 @@
 #include <asm/uaccess.h>
 #include "pci.h"
 
-asmlinkage long
-sys_pciconfig_read(unsigned long bus, unsigned long dfn,
-		   unsigned long off, unsigned long len,
-		   void __user *buf)
+SYSCALL_DEFINE5(pciconfig_read, unsigned long, bus, unsigned long, dfn,
+		unsigned long, off, unsigned long, len, void __user *, buf)
 {
 	struct pci_dev *dev;
 	u8 byte;
@@ -86,10 +84,8 @@
 	return err;
 }
 
-asmlinkage long
-sys_pciconfig_write(unsigned long bus, unsigned long dfn,
-		    unsigned long off, unsigned long len,
-		    void __user *buf)
+SYSCALL_DEFINE5(pciconfig_write, unsigned long, bus, unsigned long, dfn,
+		unsigned long, off, unsigned long, len, void __user *, buf)
 {
 	struct pci_dev *dev;
 	u8 byte;
diff --git a/drivers/pcmcia/electra_cf.c b/drivers/pcmcia/electra_cf.c
index a34284b1..d187ba4 100644
--- a/drivers/pcmcia/electra_cf.c
+++ b/drivers/pcmcia/electra_cf.c
@@ -297,7 +297,7 @@
 		goto fail3;
 	}
 
-	dev_info(device, "at mem 0x%lx io 0x%lx irq %d\n",
+	dev_info(device, "at mem 0x%lx io 0x%llx irq %d\n",
 		 cf->mem_phys, io.start, cf->irq);
 
 	cf->active = 1;
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index e65448e..1a266d4 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -54,6 +54,18 @@
 
 	  If you have an ACPI-compatible ASUS laptop, say Y or M here.
 
+config DELL_LAPTOP
+	tristate "Dell Laptop Extras (EXPERIMENTAL)"
+	depends on X86
+	depends on DCDBAS
+	depends on EXPERIMENTAL
+	depends on BACKLIGHT_CLASS_DEVICE
+	depends on RFKILL
+	default n
+	---help---
+	This driver adds support for rfkill and backlight control to Dell
+	laptops.
+
 config FUJITSU_LAPTOP
 	tristate "Fujitsu Laptop Extras"
 	depends on ACPI
@@ -192,6 +204,17 @@
 
 	  If you have an IBM or Lenovo ThinkPad laptop, say Y or M here.
 
+config THINKPAD_ACPI_DEBUGFACILITIES
+	bool "Maintainer debug facilities"
+	depends on THINKPAD_ACPI
+	default n
+	---help---
+	  Enables extra stuff in the thinkpad-acpi which is completely useless
+	  for normal use.  Read the driver source to find out what it does.
+
+	  Say N here, unless you were told by a kernel maintainer to do
+	  otherwise.
+
 config THINKPAD_ACPI_DEBUG
 	bool "Verbose debug mode"
 	depends on THINKPAD_ACPI
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index 1e9de2a..e290651 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -6,6 +6,7 @@
 obj-$(CONFIG_EEEPC_LAPTOP)	+= eeepc-laptop.o
 obj-$(CONFIG_MSI_LAPTOP)	+= msi-laptop.o
 obj-$(CONFIG_COMPAL_LAPTOP)	+= compal-laptop.o
+obj-$(CONFIG_DELL_LAPTOP)	+= dell-laptop.o
 obj-$(CONFIG_ACER_WMI)		+= acer-wmi.o
 obj-$(CONFIG_HP_WMI)		+= hp-wmi.o
 obj-$(CONFIG_TC1100_WMI)	+= tc1100-wmi.o
diff --git a/drivers/misc/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
similarity index 99%
rename from drivers/misc/dell-laptop.c
rename to drivers/platform/x86/dell-laptop.c
index 4d33a20..16e11c2 100644
--- a/drivers/misc/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -22,7 +22,7 @@
 #include <linux/rfkill.h>
 #include <linux/power_supply.h>
 #include <linux/acpi.h>
-#include "../firmware/dcdbas.h"
+#include "../../firmware/dcdbas.h"
 
 #define BRIGHTNESS_TOKEN 0x7d
 
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 02fe2b8..9d93cb9 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -90,7 +90,7 @@
 };
 
 static const char *cm_getv[] = {
-	"WLDG", NULL, NULL, NULL,
+	"WLDG", "BTHG", NULL, NULL,
 	"CAMG", NULL, NULL, NULL,
 	NULL, "PBLG", NULL, NULL,
 	"CFVG", NULL, NULL, NULL,
@@ -99,7 +99,7 @@
 };
 
 static const char *cm_setv[] = {
-	"WLDS", NULL, NULL, NULL,
+	"WLDS", "BTHS", NULL, NULL,
 	"CAMS", NULL, NULL, NULL,
 	"SDSP", "PBLS", "HDPS", NULL,
 	"CFVS", NULL, NULL, NULL,
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 3478453..bcbc051 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -21,7 +21,7 @@
  *  02110-1301, USA.
  */
 
-#define TPACPI_VERSION "0.21"
+#define TPACPI_VERSION "0.22"
 #define TPACPI_SYSFS_VERSION 0x020200
 
 /*
@@ -122,6 +122,27 @@
 #define TPACPI_HKEY_INPUT_PRODUCT	0x5054 /* "TP" */
 #define TPACPI_HKEY_INPUT_VERSION	0x4101
 
+/* ACPI \WGSV commands */
+enum {
+	TP_ACPI_WGSV_GET_STATE		= 0x01, /* Get state information */
+	TP_ACPI_WGSV_PWR_ON_ON_RESUME	= 0x02, /* Resume WWAN powered on */
+	TP_ACPI_WGSV_PWR_OFF_ON_RESUME	= 0x03,	/* Resume WWAN powered off */
+	TP_ACPI_WGSV_SAVE_STATE		= 0x04, /* Save state for S4/S5 */
+};
+
+/* TP_ACPI_WGSV_GET_STATE bits */
+enum {
+	TP_ACPI_WGSV_STATE_WWANEXIST	= 0x0001, /* WWAN hw available */
+	TP_ACPI_WGSV_STATE_WWANPWR	= 0x0002, /* WWAN radio enabled */
+	TP_ACPI_WGSV_STATE_WWANPWRRES	= 0x0004, /* WWAN state at resume */
+	TP_ACPI_WGSV_STATE_WWANBIOSOFF	= 0x0008, /* WWAN disabled in BIOS */
+	TP_ACPI_WGSV_STATE_BLTHEXIST	= 0x0001, /* BLTH hw available */
+	TP_ACPI_WGSV_STATE_BLTHPWR	= 0x0002, /* BLTH radio enabled */
+	TP_ACPI_WGSV_STATE_BLTHPWRRES	= 0x0004, /* BLTH state at resume */
+	TP_ACPI_WGSV_STATE_BLTHBIOSOFF	= 0x0008, /* BLTH disabled in BIOS */
+	TP_ACPI_WGSV_STATE_UWBEXIST	= 0x0010, /* UWB hw available */
+	TP_ACPI_WGSV_STATE_UWBPWR	= 0x0020, /* UWB radio enabled */
+};
 
 /****************************************************************************
  * Main driver
@@ -148,14 +169,17 @@
 enum {
 	TPACPI_RFK_BLUETOOTH_SW_ID = 0,
 	TPACPI_RFK_WWAN_SW_ID,
+	TPACPI_RFK_UWB_SW_ID,
 };
 
 /* Debugging */
 #define TPACPI_LOG TPACPI_FILE ": "
-#define TPACPI_ERR	   KERN_ERR    TPACPI_LOG
-#define TPACPI_NOTICE KERN_NOTICE TPACPI_LOG
-#define TPACPI_INFO   KERN_INFO   TPACPI_LOG
-#define TPACPI_DEBUG  KERN_DEBUG  TPACPI_LOG
+#define TPACPI_ALERT	KERN_ALERT  TPACPI_LOG
+#define TPACPI_CRIT	KERN_CRIT   TPACPI_LOG
+#define TPACPI_ERR	KERN_ERR    TPACPI_LOG
+#define TPACPI_NOTICE	KERN_NOTICE TPACPI_LOG
+#define TPACPI_INFO	KERN_INFO   TPACPI_LOG
+#define TPACPI_DEBUG	KERN_DEBUG  TPACPI_LOG
 
 #define TPACPI_DBG_ALL		0xffff
 #define TPACPI_DBG_INIT		0x0001
@@ -201,6 +225,7 @@
 	void (*exit) (void);
 	void (*resume) (void);
 	void (*suspend) (pm_message_t state);
+	void (*shutdown) (void);
 
 	struct list_head all_drivers;
 
@@ -239,6 +264,7 @@
 	u32 bright_16levels:1;
 	u32 bright_acpimode:1;
 	u32 wan:1;
+	u32 uwb:1;
 	u32 fan_ctrl_status_undef:1;
 	u32 input_device_registered:1;
 	u32 platform_drv_registered:1;
@@ -288,6 +314,18 @@
 	unsigned int led;
 };
 
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+static int dbg_wlswemul;
+static int tpacpi_wlsw_emulstate;
+static int dbg_bluetoothemul;
+static int tpacpi_bluetooth_emulstate;
+static int dbg_wwanemul;
+static int tpacpi_wwan_emulstate;
+static int dbg_uwbemul;
+static int tpacpi_uwb_emulstate;
+#endif
+
+
 /****************************************************************************
  ****************************************************************************
  *
@@ -728,6 +766,18 @@
 	return 0;
 }
 
+static void tpacpi_shutdown_handler(struct platform_device *pdev)
+{
+	struct ibm_struct *ibm, *itmp;
+
+	list_for_each_entry_safe(ibm, itmp,
+				 &tpacpi_all_drivers,
+				 all_drivers) {
+		if (ibm->shutdown)
+			(ibm->shutdown)();
+	}
+}
+
 static struct platform_driver tpacpi_pdriver = {
 	.driver = {
 		.name = TPACPI_DRVR_NAME,
@@ -735,6 +785,7 @@
 	},
 	.suspend = tpacpi_suspend_handler,
 	.resume = tpacpi_resume_handler,
+	.shutdown = tpacpi_shutdown_handler,
 };
 
 static struct platform_driver tpacpi_hwmon_pdriver = {
@@ -922,11 +973,27 @@
 			struct rfkill **rfk,
 			const enum rfkill_type rfktype,
 			const char *name,
+			const bool set_default,
 			int (*toggle_radio)(void *, enum rfkill_state),
 			int (*get_state)(void *, enum rfkill_state *))
 {
 	int res;
-	enum rfkill_state initial_state;
+	enum rfkill_state initial_state = RFKILL_STATE_SOFT_BLOCKED;
+
+	res = get_state(NULL, &initial_state);
+	if (res < 0) {
+		printk(TPACPI_ERR
+			"failed to read initial state for %s, error %d; "
+			"will turn radio off\n", name, res);
+	} else if (set_default) {
+		/* try to set the initial state as the default for the rfkill
+		 * type, since we ask the firmware to preserve it across S5 in
+		 * NVRAM */
+		rfkill_set_default(rfktype,
+				(initial_state == RFKILL_STATE_UNBLOCKED) ?
+					RFKILL_STATE_UNBLOCKED :
+					RFKILL_STATE_SOFT_BLOCKED);
+	}
 
 	*rfk = rfkill_allocate(&tpacpi_pdev->dev, rfktype);
 	if (!*rfk) {
@@ -938,9 +1005,7 @@
 	(*rfk)->name = name;
 	(*rfk)->get_state = get_state;
 	(*rfk)->toggle_radio = toggle_radio;
-
-	if (!get_state(NULL, &initial_state))
-		(*rfk)->state = initial_state;
+	(*rfk)->state = initial_state;
 
 	res = rfkill_register(*rfk);
 	if (res < 0) {
@@ -1006,6 +1071,119 @@
 
 /* --------------------------------------------------------------------- */
 
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+
+static void tpacpi_send_radiosw_update(void);
+
+/* wlsw_emulstate ------------------------------------------------------ */
+static ssize_t tpacpi_driver_wlsw_emulstate_show(struct device_driver *drv,
+						char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%d\n", !!tpacpi_wlsw_emulstate);
+}
+
+static ssize_t tpacpi_driver_wlsw_emulstate_store(struct device_driver *drv,
+						const char *buf, size_t count)
+{
+	unsigned long t;
+
+	if (parse_strtoul(buf, 1, &t))
+		return -EINVAL;
+
+	if (tpacpi_wlsw_emulstate != t) {
+		tpacpi_wlsw_emulstate = !!t;
+		tpacpi_send_radiosw_update();
+	} else
+		tpacpi_wlsw_emulstate = !!t;
+
+	return count;
+}
+
+static DRIVER_ATTR(wlsw_emulstate, S_IWUSR | S_IRUGO,
+		tpacpi_driver_wlsw_emulstate_show,
+		tpacpi_driver_wlsw_emulstate_store);
+
+/* bluetooth_emulstate ------------------------------------------------- */
+static ssize_t tpacpi_driver_bluetooth_emulstate_show(
+					struct device_driver *drv,
+					char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%d\n", !!tpacpi_bluetooth_emulstate);
+}
+
+static ssize_t tpacpi_driver_bluetooth_emulstate_store(
+					struct device_driver *drv,
+					const char *buf, size_t count)
+{
+	unsigned long t;
+
+	if (parse_strtoul(buf, 1, &t))
+		return -EINVAL;
+
+	tpacpi_bluetooth_emulstate = !!t;
+
+	return count;
+}
+
+static DRIVER_ATTR(bluetooth_emulstate, S_IWUSR | S_IRUGO,
+		tpacpi_driver_bluetooth_emulstate_show,
+		tpacpi_driver_bluetooth_emulstate_store);
+
+/* wwan_emulstate ------------------------------------------------- */
+static ssize_t tpacpi_driver_wwan_emulstate_show(
+					struct device_driver *drv,
+					char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%d\n", !!tpacpi_wwan_emulstate);
+}
+
+static ssize_t tpacpi_driver_wwan_emulstate_store(
+					struct device_driver *drv,
+					const char *buf, size_t count)
+{
+	unsigned long t;
+
+	if (parse_strtoul(buf, 1, &t))
+		return -EINVAL;
+
+	tpacpi_wwan_emulstate = !!t;
+
+	return count;
+}
+
+static DRIVER_ATTR(wwan_emulstate, S_IWUSR | S_IRUGO,
+		tpacpi_driver_wwan_emulstate_show,
+		tpacpi_driver_wwan_emulstate_store);
+
+/* uwb_emulstate ------------------------------------------------- */
+static ssize_t tpacpi_driver_uwb_emulstate_show(
+					struct device_driver *drv,
+					char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%d\n", !!tpacpi_uwb_emulstate);
+}
+
+static ssize_t tpacpi_driver_uwb_emulstate_store(
+					struct device_driver *drv,
+					const char *buf, size_t count)
+{
+	unsigned long t;
+
+	if (parse_strtoul(buf, 1, &t))
+		return -EINVAL;
+
+	tpacpi_uwb_emulstate = !!t;
+
+	return count;
+}
+
+static DRIVER_ATTR(uwb_emulstate, S_IWUSR | S_IRUGO,
+		tpacpi_driver_uwb_emulstate_show,
+		tpacpi_driver_uwb_emulstate_store);
+#endif
+
+/* --------------------------------------------------------------------- */
+
 static struct driver_attribute *tpacpi_driver_attributes[] = {
 	&driver_attr_debug_level, &driver_attr_version,
 	&driver_attr_interface_version,
@@ -1022,6 +1200,17 @@
 		i++;
 	}
 
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+	if (!res && dbg_wlswemul)
+		res = driver_create_file(drv, &driver_attr_wlsw_emulstate);
+	if (!res && dbg_bluetoothemul)
+		res = driver_create_file(drv, &driver_attr_bluetooth_emulstate);
+	if (!res && dbg_wwanemul)
+		res = driver_create_file(drv, &driver_attr_wwan_emulstate);
+	if (!res && dbg_uwbemul)
+		res = driver_create_file(drv, &driver_attr_uwb_emulstate);
+#endif
+
 	return res;
 }
 
@@ -1031,6 +1220,13 @@
 
 	for (i = 0; i < ARRAY_SIZE(tpacpi_driver_attributes); i++)
 		driver_remove_file(drv, tpacpi_driver_attributes[i]);
+
+#ifdef THINKPAD_ACPI_DEBUGFACILITIES
+	driver_remove_file(drv, &driver_attr_wlsw_emulstate);
+	driver_remove_file(drv, &driver_attr_bluetooth_emulstate);
+	driver_remove_file(drv, &driver_attr_wwan_emulstate);
+	driver_remove_file(drv, &driver_attr_uwb_emulstate);
+#endif
 }
 
 /****************************************************************************
@@ -1216,6 +1412,12 @@
 
 static int hotkey_get_wlsw(int *status)
 {
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+	if (dbg_wlswemul) {
+		*status = !!tpacpi_wlsw_emulstate;
+		return 0;
+	}
+#endif
 	if (!acpi_evalf(hkey_handle, status, "WLSW", "d"))
 		return -EIO;
 	return 0;
@@ -1678,7 +1880,7 @@
 {
 	int res;
 
-	if (mutex_lock_interruptible(&hotkey_mutex))
+	if (mutex_lock_killable(&hotkey_mutex))
 		return -ERESTARTSYS;
 	res = hotkey_mask_get();
 	mutex_unlock(&hotkey_mutex);
@@ -1697,7 +1899,7 @@
 	if (parse_strtoul(buf, 0xffffffffUL, &t))
 		return -EINVAL;
 
-	if (mutex_lock_interruptible(&hotkey_mutex))
+	if (mutex_lock_killable(&hotkey_mutex))
 		return -ERESTARTSYS;
 
 	res = hotkey_mask_set(t);
@@ -1783,7 +1985,7 @@
 		((t & ~TPACPI_HKEY_NVRAM_KNOWN_MASK) != 0))
 		return -EINVAL;
 
-	if (mutex_lock_interruptible(&hotkey_mutex))
+	if (mutex_lock_killable(&hotkey_mutex))
 		return -ERESTARTSYS;
 
 	HOTKEY_CONFIG_CRITICAL_START
@@ -1818,7 +2020,7 @@
 	if (parse_strtoul(buf, 25, &t))
 		return -EINVAL;
 
-	if (mutex_lock_interruptible(&hotkey_mutex))
+	if (mutex_lock_killable(&hotkey_mutex))
 		return -ERESTARTSYS;
 
 	hotkey_poll_freq = t;
@@ -1958,6 +2160,7 @@
 
 static void bluetooth_update_rfk(void);
 static void wan_update_rfk(void);
+static void uwb_update_rfk(void);
 static void tpacpi_send_radiosw_update(void)
 {
 	int wlsw;
@@ -1967,6 +2170,8 @@
 		bluetooth_update_rfk();
 	if (tp_features.wan)
 		wan_update_rfk();
+	if (tp_features.uwb)
+		uwb_update_rfk();
 
 	if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&wlsw)) {
 		mutex_lock(&tpacpi_inputdev_send_mutex);
@@ -2222,6 +2427,13 @@
 		    hotkey_source_mask, hotkey_poll_freq);
 #endif
 
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+	if (dbg_wlswemul) {
+		tp_features.hotkey_wlsw = 1;
+		printk(TPACPI_INFO
+			"radio switch emulation enabled\n");
+	} else
+#endif
 	/* Not all thinkpads have a hardware radio switch */
 	if (acpi_evalf(hkey_handle, &status, "WLSW", "qd")) {
 		tp_features.hotkey_wlsw = 1;
@@ -2361,13 +2573,154 @@
 	return (res < 0)? res : 1;
 }
 
+static bool hotkey_notify_hotkey(const u32 hkey,
+				 bool *send_acpi_ev,
+				 bool *ignore_acpi_ev)
+{
+	/* 0x1000-0x1FFF: key presses */
+	unsigned int scancode = hkey & 0xfff;
+	*send_acpi_ev = true;
+	*ignore_acpi_ev = false;
+
+	if (scancode > 0 && scancode < 0x21) {
+		scancode--;
+		if (!(hotkey_source_mask & (1 << scancode))) {
+			tpacpi_input_send_key(scancode);
+			*send_acpi_ev = false;
+		} else {
+			*ignore_acpi_ev = true;
+		}
+		return true;
+	}
+	return false;
+}
+
+static bool hotkey_notify_wakeup(const u32 hkey,
+				 bool *send_acpi_ev,
+				 bool *ignore_acpi_ev)
+{
+	/* 0x2000-0x2FFF: Wakeup reason */
+	*send_acpi_ev = true;
+	*ignore_acpi_ev = false;
+
+	switch (hkey) {
+	case 0x2304: /* suspend, undock */
+	case 0x2404: /* hibernation, undock */
+		hotkey_wakeup_reason = TP_ACPI_WAKEUP_UNDOCK;
+		*ignore_acpi_ev = true;
+		break;
+
+	case 0x2305: /* suspend, bay eject */
+	case 0x2405: /* hibernation, bay eject */
+		hotkey_wakeup_reason = TP_ACPI_WAKEUP_BAYEJ;
+		*ignore_acpi_ev = true;
+		break;
+
+	case 0x2313: /* Battery on critical low level (S3) */
+	case 0x2413: /* Battery on critical low level (S4) */
+		printk(TPACPI_ALERT
+			"EMERGENCY WAKEUP: battery almost empty\n");
+		/* how to auto-heal: */
+		/* 2313: woke up from S3, go to S4/S5 */
+		/* 2413: woke up from S4, go to S5 */
+		break;
+
+	default:
+		return false;
+	}
+
+	if (hotkey_wakeup_reason != TP_ACPI_WAKEUP_NONE) {
+		printk(TPACPI_INFO
+		       "woke up due to a hot-unplug "
+		       "request...\n");
+		hotkey_wakeup_reason_notify_change();
+	}
+	return true;
+}
+
+static bool hotkey_notify_usrevent(const u32 hkey,
+				 bool *send_acpi_ev,
+				 bool *ignore_acpi_ev)
+{
+	/* 0x5000-0x5FFF: human interface helpers */
+	*send_acpi_ev = true;
+	*ignore_acpi_ev = false;
+
+	switch (hkey) {
+	case 0x5010: /* Lenovo new BIOS: brightness changed */
+	case 0x500b: /* X61t: tablet pen inserted into bay */
+	case 0x500c: /* X61t: tablet pen removed from bay */
+		return true;
+
+	case 0x5009: /* X41t-X61t: swivel up (tablet mode) */
+	case 0x500a: /* X41t-X61t: swivel down (normal mode) */
+		tpacpi_input_send_tabletsw();
+		hotkey_tablet_mode_notify_change();
+		*send_acpi_ev = false;
+		return true;
+
+	case 0x5001:
+	case 0x5002:
+		/* LID switch events.  Do not propagate */
+		*ignore_acpi_ev = true;
+		return true;
+
+	default:
+		return false;
+	}
+}
+
+static bool hotkey_notify_thermal(const u32 hkey,
+				 bool *send_acpi_ev,
+				 bool *ignore_acpi_ev)
+{
+	/* 0x6000-0x6FFF: thermal alarms */
+	*send_acpi_ev = true;
+	*ignore_acpi_ev = false;
+
+	switch (hkey) {
+	case 0x6011:
+		printk(TPACPI_CRIT
+			"THERMAL ALARM: battery is too hot!\n");
+		/* recommended action: warn user through gui */
+		return true;
+	case 0x6012:
+		printk(TPACPI_ALERT
+			"THERMAL EMERGENCY: battery is extremely hot!\n");
+		/* recommended action: immediate sleep/hibernate */
+		return true;
+	case 0x6021:
+		printk(TPACPI_CRIT
+			"THERMAL ALARM: "
+			"a sensor reports something is too hot!\n");
+		/* recommended action: warn user through gui, that */
+		/* some internal component is too hot */
+		return true;
+	case 0x6022:
+		printk(TPACPI_ALERT
+			"THERMAL EMERGENCY: "
+			"a sensor reports something is extremely hot!\n");
+		/* recommended action: immediate sleep/hibernate */
+		return true;
+	case 0x6030:
+		printk(TPACPI_INFO
+			"EC reports that Thermal Table has changed\n");
+		/* recommended action: do nothing, we don't have
+		 * Lenovo ATM information */
+		return true;
+	default:
+		printk(TPACPI_ALERT
+			 "THERMAL ALERT: unknown thermal alarm received\n");
+		return false;
+	}
+}
+
 static void hotkey_notify(struct ibm_struct *ibm, u32 event)
 {
 	u32 hkey;
-	unsigned int scancode;
-	int send_acpi_ev;
-	int ignore_acpi_ev;
-	int unk_ev;
+	bool send_acpi_ev;
+	bool ignore_acpi_ev;
+	bool known_ev;
 
 	if (event != 0x80) {
 		printk(TPACPI_ERR
@@ -2375,7 +2728,7 @@
 		/* forward it to userspace, maybe it knows how to handle it */
 		acpi_bus_generate_netlink_event(
 					ibm->acpi->device->pnp.device_class,
-					ibm->acpi->device->dev.bus_id,
+					dev_name(&ibm->acpi->device->dev),
 					event, 0);
 		return;
 	}
@@ -2391,107 +2744,72 @@
 			return;
 		}
 
-		send_acpi_ev = 1;
-		ignore_acpi_ev = 0;
-		unk_ev = 0;
+		send_acpi_ev = true;
+		ignore_acpi_ev = false;
 
 		switch (hkey >> 12) {
 		case 1:
 			/* 0x1000-0x1FFF: key presses */
-			scancode = hkey & 0xfff;
-			if (scancode > 0 && scancode < 0x21) {
-				scancode--;
-				if (!(hotkey_source_mask & (1 << scancode))) {
-					tpacpi_input_send_key(scancode);
-					send_acpi_ev = 0;
-				} else {
-					ignore_acpi_ev = 1;
-				}
-			} else {
-				unk_ev = 1;
-			}
+			known_ev = hotkey_notify_hotkey(hkey, &send_acpi_ev,
+						 &ignore_acpi_ev);
 			break;
 		case 2:
-			/* Wakeup reason */
-			switch (hkey) {
-			case 0x2304: /* suspend, undock */
-			case 0x2404: /* hibernation, undock */
-				hotkey_wakeup_reason = TP_ACPI_WAKEUP_UNDOCK;
-				ignore_acpi_ev = 1;
-				break;
-			case 0x2305: /* suspend, bay eject */
-			case 0x2405: /* hibernation, bay eject */
-				hotkey_wakeup_reason = TP_ACPI_WAKEUP_BAYEJ;
-				ignore_acpi_ev = 1;
-				break;
-			default:
-				unk_ev = 1;
-			}
-			if (hotkey_wakeup_reason != TP_ACPI_WAKEUP_NONE) {
-				printk(TPACPI_INFO
-				       "woke up due to a hot-unplug "
-				       "request...\n");
-				hotkey_wakeup_reason_notify_change();
-			}
+			/* 0x2000-0x2FFF: Wakeup reason */
+			known_ev = hotkey_notify_wakeup(hkey, &send_acpi_ev,
+						 &ignore_acpi_ev);
 			break;
 		case 3:
-			/* bay-related wakeups */
+			/* 0x3000-0x3FFF: bay-related wakeups */
 			if (hkey == 0x3003) {
 				hotkey_autosleep_ack = 1;
 				printk(TPACPI_INFO
 				       "bay ejected\n");
 				hotkey_wakeup_hotunplug_complete_notify_change();
+				known_ev = true;
 			} else {
-				unk_ev = 1;
+				known_ev = false;
 			}
 			break;
 		case 4:
-			/* dock-related wakeups */
+			/* 0x4000-0x4FFF: dock-related wakeups */
 			if (hkey == 0x4003) {
 				hotkey_autosleep_ack = 1;
 				printk(TPACPI_INFO
 				       "undocked\n");
 				hotkey_wakeup_hotunplug_complete_notify_change();
+				known_ev = true;
 			} else {
-				unk_ev = 1;
+				known_ev = false;
 			}
 			break;
 		case 5:
 			/* 0x5000-0x5FFF: human interface helpers */
-			switch (hkey) {
-			case 0x5010: /* Lenovo new BIOS: brightness changed */
-			case 0x500b: /* X61t: tablet pen inserted into bay */
-			case 0x500c: /* X61t: tablet pen removed from bay */
-				break;
-			case 0x5009: /* X41t-X61t: swivel up (tablet mode) */
-			case 0x500a: /* X41t-X61t: swivel down (normal mode) */
-				tpacpi_input_send_tabletsw();
-				hotkey_tablet_mode_notify_change();
-				send_acpi_ev = 0;
-				break;
-			case 0x5001:
-			case 0x5002:
-				/* LID switch events.  Do not propagate */
-				ignore_acpi_ev = 1;
-				break;
-			default:
-				unk_ev = 1;
-			}
+			known_ev = hotkey_notify_usrevent(hkey, &send_acpi_ev,
+						 &ignore_acpi_ev);
+			break;
+		case 6:
+			/* 0x6000-0x6FFF: thermal alarms */
+			known_ev = hotkey_notify_thermal(hkey, &send_acpi_ev,
+						 &ignore_acpi_ev);
 			break;
 		case 7:
 			/* 0x7000-0x7FFF: misc */
 			if (tp_features.hotkey_wlsw && hkey == 0x7000) {
 				tpacpi_send_radiosw_update();
 				send_acpi_ev = 0;
+				known_ev = true;
 				break;
 			}
 			/* fallthrough to default */
 		default:
-			unk_ev = 1;
+			known_ev = false;
 		}
-		if (unk_ev) {
+		if (!known_ev) {
 			printk(TPACPI_NOTICE
 			       "unhandled HKEY event 0x%04x\n", hkey);
+			printk(TPACPI_NOTICE
+			       "please report the conditions when this "
+			       "event happened to %s\n", TPACPI_MAIL);
 		}
 
 		/* Legacy events */
@@ -2505,7 +2823,7 @@
 		if (!ignore_acpi_ev && send_acpi_ev) {
 			acpi_bus_generate_netlink_event(
 					ibm->acpi->device->pnp.device_class,
-					ibm->acpi->device->dev.bus_id,
+					dev_name(&ibm->acpi->device->dev),
 					event, hkey);
 		}
 	}
@@ -2544,7 +2862,7 @@
 		return len;
 	}
 
-	if (mutex_lock_interruptible(&hotkey_mutex))
+	if (mutex_lock_killable(&hotkey_mutex))
 		return -ERESTARTSYS;
 	res = hotkey_status_get(&status);
 	if (!res)
@@ -2575,7 +2893,7 @@
 	if (!tp_features.hotkey)
 		return -ENODEV;
 
-	if (mutex_lock_interruptible(&hotkey_mutex))
+	if (mutex_lock_killable(&hotkey_mutex))
 		return -ERESTARTSYS;
 
 	status = -1;
@@ -2640,11 +2958,28 @@
 	/* ACPI GBDC/SBDC bits */
 	TP_ACPI_BLUETOOTH_HWPRESENT	= 0x01,	/* Bluetooth hw available */
 	TP_ACPI_BLUETOOTH_RADIOSSW	= 0x02,	/* Bluetooth radio enabled */
-	TP_ACPI_BLUETOOTH_UNK		= 0x04,	/* unknown function */
+	TP_ACPI_BLUETOOTH_RESUMECTRL	= 0x04,	/* Bluetooth state at resume:
+						   off / last state */
+};
+
+enum {
+	/* ACPI \BLTH commands */
+	TP_ACPI_BLTH_GET_ULTRAPORT_ID	= 0x00, /* Get Ultraport BT ID */
+	TP_ACPI_BLTH_GET_PWR_ON_RESUME	= 0x01, /* Get power-on-resume state */
+	TP_ACPI_BLTH_PWR_ON_ON_RESUME	= 0x02, /* Resume powered on */
+	TP_ACPI_BLTH_PWR_OFF_ON_RESUME	= 0x03,	/* Resume powered off */
+	TP_ACPI_BLTH_SAVE_STATE		= 0x05, /* Save state for S4/S5 */
 };
 
 static struct rfkill *tpacpi_bluetooth_rfkill;
 
+static void bluetooth_suspend(pm_message_t state)
+{
+	/* Try to make sure radio will resume powered off */
+	acpi_evalf(NULL, NULL, "\\BLTH", "vd",
+		   TP_ACPI_BLTH_PWR_OFF_ON_RESUME);
+}
+
 static int bluetooth_get_radiosw(void)
 {
 	int status;
@@ -2656,6 +2991,12 @@
 	if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&status) && !status)
 		return RFKILL_STATE_HARD_BLOCKED;
 
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+	if (dbg_bluetoothemul)
+		return (tpacpi_bluetooth_emulstate) ?
+			RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED;
+#endif
+
 	if (!acpi_evalf(hkey_handle, &status, "GBDC", "d"))
 		return -EIO;
 
@@ -2689,12 +3030,20 @@
 	    && radio_on)
 		return -EPERM;
 
-	if (!acpi_evalf(hkey_handle, &status, "GBDC", "d"))
-		return -EIO;
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+	if (dbg_bluetoothemul) {
+		tpacpi_bluetooth_emulstate = !!radio_on;
+		if (update_rfk)
+			bluetooth_update_rfk();
+		return 0;
+	}
+#endif
+
+	/* We make sure to keep TP_ACPI_BLUETOOTH_RESUMECTRL off */
 	if (radio_on)
-		status |= TP_ACPI_BLUETOOTH_RADIOSSW;
+		status = TP_ACPI_BLUETOOTH_RADIOSSW;
 	else
-		status &= ~TP_ACPI_BLUETOOTH_RADIOSSW;
+		status = 0;
 	if (!acpi_evalf(hkey_handle, NULL, "SBDC", "vd", status))
 		return -EIO;
 
@@ -2765,8 +3114,19 @@
 	return bluetooth_set_radiosw((state == RFKILL_STATE_UNBLOCKED), 0);
 }
 
+static void bluetooth_shutdown(void)
+{
+	/* Order firmware to save current state to NVRAM */
+	if (!acpi_evalf(NULL, NULL, "\\BLTH", "vd",
+			TP_ACPI_BLTH_SAVE_STATE))
+		printk(TPACPI_NOTICE
+			"failed to save bluetooth state to NVRAM\n");
+}
+
 static void bluetooth_exit(void)
 {
+	bluetooth_shutdown();
+
 	if (tpacpi_bluetooth_rfkill)
 		rfkill_unregister(tpacpi_bluetooth_rfkill);
 
@@ -2792,6 +3152,13 @@
 		str_supported(tp_features.bluetooth),
 		status);
 
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+	if (dbg_bluetoothemul) {
+		tp_features.bluetooth = 1;
+		printk(TPACPI_INFO
+			"bluetooth switch emulation enabled\n");
+	} else
+#endif
 	if (tp_features.bluetooth &&
 	    !(status & TP_ACPI_BLUETOOTH_HWPRESENT)) {
 		/* no bluetooth hardware present in system */
@@ -2812,6 +3179,7 @@
 				&tpacpi_bluetooth_rfkill,
 				RFKILL_TYPE_BLUETOOTH,
 				"tpacpi_bluetooth_sw",
+				true,
 				tpacpi_bluetooth_rfk_set,
 				tpacpi_bluetooth_rfk_get);
 	if (res) {
@@ -2864,6 +3232,8 @@
 	.read = bluetooth_read,
 	.write = bluetooth_write,
 	.exit = bluetooth_exit,
+	.suspend = bluetooth_suspend,
+	.shutdown = bluetooth_shutdown,
 };
 
 /*************************************************************************
@@ -2874,11 +3244,19 @@
 	/* ACPI GWAN/SWAN bits */
 	TP_ACPI_WANCARD_HWPRESENT	= 0x01,	/* Wan hw available */
 	TP_ACPI_WANCARD_RADIOSSW	= 0x02,	/* Wan radio enabled */
-	TP_ACPI_WANCARD_UNK		= 0x04,	/* unknown function */
+	TP_ACPI_WANCARD_RESUMECTRL	= 0x04,	/* Wan state at resume:
+						   off / last state */
 };
 
 static struct rfkill *tpacpi_wan_rfkill;
 
+static void wan_suspend(pm_message_t state)
+{
+	/* Try to make sure radio will resume powered off */
+	acpi_evalf(NULL, NULL, "\\WGSV", "qvd",
+		   TP_ACPI_WGSV_PWR_OFF_ON_RESUME);
+}
+
 static int wan_get_radiosw(void)
 {
 	int status;
@@ -2890,6 +3268,12 @@
 	if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&status) && !status)
 		return RFKILL_STATE_HARD_BLOCKED;
 
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+	if (dbg_wwanemul)
+		return (tpacpi_wwan_emulstate) ?
+			RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED;
+#endif
+
 	if (!acpi_evalf(hkey_handle, &status, "GWAN", "d"))
 		return -EIO;
 
@@ -2923,12 +3307,20 @@
 	    && radio_on)
 		return -EPERM;
 
-	if (!acpi_evalf(hkey_handle, &status, "GWAN", "d"))
-		return -EIO;
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+	if (dbg_wwanemul) {
+		tpacpi_wwan_emulstate = !!radio_on;
+		if (update_rfk)
+			wan_update_rfk();
+		return 0;
+	}
+#endif
+
+	/* We make sure to keep TP_ACPI_WANCARD_RESUMECTRL off */
 	if (radio_on)
-		status |= TP_ACPI_WANCARD_RADIOSSW;
+		status = TP_ACPI_WANCARD_RADIOSSW;
 	else
-		status &= ~TP_ACPI_WANCARD_RADIOSSW;
+		status = 0;
 	if (!acpi_evalf(hkey_handle, NULL, "SWAN", "vd", status))
 		return -EIO;
 
@@ -2999,8 +3391,19 @@
 	return wan_set_radiosw((state == RFKILL_STATE_UNBLOCKED), 0);
 }
 
+static void wan_shutdown(void)
+{
+	/* Order firmware to save current state to NVRAM */
+	if (!acpi_evalf(NULL, NULL, "\\WGSV", "vd",
+			TP_ACPI_WGSV_SAVE_STATE))
+		printk(TPACPI_NOTICE
+			"failed to save WWAN state to NVRAM\n");
+}
+
 static void wan_exit(void)
 {
+	wan_shutdown();
+
 	if (tpacpi_wan_rfkill)
 		rfkill_unregister(tpacpi_wan_rfkill);
 
@@ -3024,6 +3427,13 @@
 		str_supported(tp_features.wan),
 		status);
 
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+	if (dbg_wwanemul) {
+		tp_features.wan = 1;
+		printk(TPACPI_INFO
+			"wwan switch emulation enabled\n");
+	} else
+#endif
 	if (tp_features.wan &&
 	    !(status & TP_ACPI_WANCARD_HWPRESENT)) {
 		/* no wan hardware present in system */
@@ -3044,6 +3454,7 @@
 				&tpacpi_wan_rfkill,
 				RFKILL_TYPE_WWAN,
 				"tpacpi_wwan_sw",
+				true,
 				tpacpi_wan_rfk_set,
 				tpacpi_wan_rfk_get);
 	if (res) {
@@ -3096,6 +3507,164 @@
 	.read = wan_read,
 	.write = wan_write,
 	.exit = wan_exit,
+	.suspend = wan_suspend,
+	.shutdown = wan_shutdown,
+};
+
+/*************************************************************************
+ * UWB subdriver
+ */
+
+enum {
+	/* ACPI GUWB/SUWB bits */
+	TP_ACPI_UWB_HWPRESENT	= 0x01,	/* UWB hw available */
+	TP_ACPI_UWB_RADIOSSW	= 0x02,	/* UWB radio enabled */
+};
+
+static struct rfkill *tpacpi_uwb_rfkill;
+
+static int uwb_get_radiosw(void)
+{
+	int status;
+
+	if (!tp_features.uwb)
+		return -ENODEV;
+
+	/* WLSW overrides UWB in firmware/hardware, reflect that */
+	if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&status) && !status)
+		return RFKILL_STATE_HARD_BLOCKED;
+
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+	if (dbg_uwbemul)
+		return (tpacpi_uwb_emulstate) ?
+			RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED;
+#endif
+
+	if (!acpi_evalf(hkey_handle, &status, "GUWB", "d"))
+		return -EIO;
+
+	return ((status & TP_ACPI_UWB_RADIOSSW) != 0) ?
+		RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED;
+}
+
+static void uwb_update_rfk(void)
+{
+	int status;
+
+	if (!tpacpi_uwb_rfkill)
+		return;
+
+	status = uwb_get_radiosw();
+	if (status < 0)
+		return;
+	rfkill_force_state(tpacpi_uwb_rfkill, status);
+}
+
+static int uwb_set_radiosw(int radio_on, int update_rfk)
+{
+	int status;
+
+	if (!tp_features.uwb)
+		return -ENODEV;
+
+	/* WLSW overrides UWB in firmware/hardware, but there is no
+	 * reason to risk weird behaviour. */
+	if (tp_features.hotkey_wlsw && !hotkey_get_wlsw(&status) && !status
+	    && radio_on)
+		return -EPERM;
+
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+	if (dbg_uwbemul) {
+		tpacpi_uwb_emulstate = !!radio_on;
+		if (update_rfk)
+			uwb_update_rfk();
+		return 0;
+	}
+#endif
+
+	status = (radio_on) ? TP_ACPI_UWB_RADIOSSW : 0;
+	if (!acpi_evalf(hkey_handle, NULL, "SUWB", "vd", status))
+		return -EIO;
+
+	if (update_rfk)
+		uwb_update_rfk();
+
+	return 0;
+}
+
+/* --------------------------------------------------------------------- */
+
+static int tpacpi_uwb_rfk_get(void *data, enum rfkill_state *state)
+{
+	int uwbs = uwb_get_radiosw();
+
+	if (uwbs < 0)
+		return uwbs;
+
+	*state = uwbs;
+	return 0;
+}
+
+static int tpacpi_uwb_rfk_set(void *data, enum rfkill_state state)
+{
+	return uwb_set_radiosw((state == RFKILL_STATE_UNBLOCKED), 0);
+}
+
+static void uwb_exit(void)
+{
+	if (tpacpi_uwb_rfkill)
+		rfkill_unregister(tpacpi_uwb_rfkill);
+}
+
+static int __init uwb_init(struct ibm_init_struct *iibm)
+{
+	int res;
+	int status = 0;
+
+	vdbg_printk(TPACPI_DBG_INIT, "initializing uwb subdriver\n");
+
+	TPACPI_ACPIHANDLE_INIT(hkey);
+
+	tp_features.uwb = hkey_handle &&
+	    acpi_evalf(hkey_handle, &status, "GUWB", "qd");
+
+	vdbg_printk(TPACPI_DBG_INIT, "uwb is %s, status 0x%02x\n",
+		str_supported(tp_features.uwb),
+		status);
+
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+	if (dbg_uwbemul) {
+		tp_features.uwb = 1;
+		printk(TPACPI_INFO
+			"uwb switch emulation enabled\n");
+	} else
+#endif
+	if (tp_features.uwb &&
+	    !(status & TP_ACPI_UWB_HWPRESENT)) {
+		/* no uwb hardware present in system */
+		tp_features.uwb = 0;
+		dbg_printk(TPACPI_DBG_INIT,
+			   "uwb hardware not installed\n");
+	}
+
+	if (!tp_features.uwb)
+		return 1;
+
+	res = tpacpi_new_rfkill(TPACPI_RFK_UWB_SW_ID,
+				&tpacpi_uwb_rfkill,
+				RFKILL_TYPE_UWB,
+				"tpacpi_uwb_sw",
+				false,
+				tpacpi_uwb_rfk_set,
+				tpacpi_uwb_rfk_get);
+
+	return res;
+}
+
+static struct ibm_struct uwb_driver_data = {
+	.name = "uwb",
+	.exit = uwb_exit,
+	.flags.experimental = 1,
 };
 
 /*************************************************************************
@@ -3724,7 +4293,7 @@
 	}
 	acpi_bus_generate_proc_event(ibm->acpi->device, event, data);
 	acpi_bus_generate_netlink_event(ibm->acpi->device->pnp.device_class,
-					  ibm->acpi->device->dev.bus_id,
+					  dev_name(&ibm->acpi->device->dev),
 					  event, data);
 }
 
@@ -3826,7 +4395,7 @@
 {
 	acpi_bus_generate_proc_event(ibm->acpi->device, event, 0);
 	acpi_bus_generate_netlink_event(ibm->acpi->device->pnp.device_class,
-					  ibm->acpi->device->dev.bus_id,
+					  dev_name(&ibm->acpi->device->dev),
 					  event, 0);
 }
 
@@ -4850,7 +5419,7 @@
 	    value < 0)
 		return -EINVAL;
 
-	res = mutex_lock_interruptible(&brightness_mutex);
+	res = mutex_lock_killable(&brightness_mutex);
 	if (res < 0)
 		return res;
 
@@ -5334,6 +5903,60 @@
 	   );			/* all others */
 
 /*
+ * Unitialized HFSP quirk: ACPI DSDT and EC fail to initialize the
+ * HFSP register at boot, so it contains 0x07 but the Thinkpad could
+ * be in auto mode (0x80).
+ *
+ * This is corrected by any write to HFSP either by the driver, or
+ * by the firmware.
+ *
+ * We assume 0x07 really means auto mode while this quirk is active,
+ * as this is far more likely than the ThinkPad being in level 7,
+ * which is only used by the firmware during thermal emergencies.
+ */
+
+static void fan_quirk1_detect(void)
+{
+	/* In some ThinkPads, neither the EC nor the ACPI
+	 * DSDT initialize the HFSP register, and it ends up
+	 * being initially set to 0x07 when it *could* be
+	 * either 0x07 or 0x80.
+	 *
+	 * Enable for TP-1Y (T43), TP-78 (R51e),
+	 * TP-76 (R52), TP-70 (T43, R52), which are known
+	 * to be buggy. */
+	if (fan_control_initial_status == 0x07) {
+		switch (thinkpad_id.ec_model) {
+		case 0x5931: /* TP-1Y */
+		case 0x3837: /* TP-78 */
+		case 0x3637: /* TP-76 */
+		case 0x3037: /* TP-70 */
+			printk(TPACPI_NOTICE
+			       "fan_init: initial fan status is unknown, "
+			       "assuming it is in auto mode\n");
+			tp_features.fan_ctrl_status_undef = 1;
+			;;
+		}
+	}
+}
+
+static void fan_quirk1_handle(u8 *fan_status)
+{
+	if (unlikely(tp_features.fan_ctrl_status_undef)) {
+		if (*fan_status != fan_control_initial_status) {
+			/* something changed the HFSP regisnter since
+			 * driver init time, so it is not undefined
+			 * anymore */
+			tp_features.fan_ctrl_status_undef = 0;
+		} else {
+			/* Return most likely status. In fact, it
+			 * might be the only possible status */
+			*fan_status = TP_EC_FAN_AUTO;
+		}
+	}
+}
+
+/*
  * Call with fan_mutex held
  */
 static void fan_update_desired_level(u8 status)
@@ -5371,8 +5994,10 @@
 		if (unlikely(!acpi_ec_read(fan_status_offset, &s)))
 			return -EIO;
 
-		if (likely(status))
+		if (likely(status)) {
 			*status = s;
+			fan_quirk1_handle(status);
+		}
 
 		break;
 
@@ -5388,7 +6013,7 @@
 	int rc;
 	u8 s;
 
-	if (mutex_lock_interruptible(&fan_mutex))
+	if (mutex_lock_killable(&fan_mutex))
 		return -ERESTARTSYS;
 	rc = fan_get_status(&s);
 	if (!rc)
@@ -5471,7 +6096,7 @@
 	if (!fan_control_allowed)
 		return -EPERM;
 
-	if (mutex_lock_interruptible(&fan_mutex))
+	if (mutex_lock_killable(&fan_mutex))
 		return -ERESTARTSYS;
 
 	if (level == TPACPI_FAN_LAST_LEVEL)
@@ -5493,7 +6118,7 @@
 	if (!fan_control_allowed)
 		return -EPERM;
 
-	if (mutex_lock_interruptible(&fan_mutex))
+	if (mutex_lock_killable(&fan_mutex))
 		return -ERESTARTSYS;
 
 	switch (fan_control_access_mode) {
@@ -5548,7 +6173,7 @@
 	if (!fan_control_allowed)
 		return -EPERM;
 
-	if (mutex_lock_interruptible(&fan_mutex))
+	if (mutex_lock_killable(&fan_mutex))
 		return -ERESTARTSYS;
 
 	rc = 0;
@@ -5586,7 +6211,7 @@
 	if (!fan_control_allowed)
 		return -EPERM;
 
-	if (mutex_lock_interruptible(&fan_mutex))
+	if (mutex_lock_killable(&fan_mutex))
 		return -ERESTARTSYS;
 
 	rc = 0;
@@ -5682,16 +6307,6 @@
 	if (res)
 		return res;
 
-	if (unlikely(tp_features.fan_ctrl_status_undef)) {
-		if (status != fan_control_initial_status) {
-			tp_features.fan_ctrl_status_undef = 0;
-		} else {
-			/* Return most likely status. In fact, it
-			 * might be the only possible status */
-			status = TP_EC_FAN_AUTO;
-		}
-	}
-
 	if (status & TP_EC_FAN_FULLSPEED) {
 		mode = 0;
 	} else if (status & TP_EC_FAN_AUTO) {
@@ -5756,14 +6371,6 @@
 	if (res)
 		return res;
 
-	if (unlikely(tp_features.fan_ctrl_status_undef)) {
-		if (status != fan_control_initial_status) {
-			tp_features.fan_ctrl_status_undef = 0;
-		} else {
-			status = TP_EC_FAN_AUTO;
-		}
-	}
-
 	if ((status &
 	     (TP_EC_FAN_AUTO | TP_EC_FAN_FULLSPEED)) != 0)
 		status = fan_control_desired_level;
@@ -5788,7 +6395,7 @@
 	/* scale down from 0-255 to 0-7 */
 	newlevel = (s >> 5) & 0x07;
 
-	if (mutex_lock_interruptible(&fan_mutex))
+	if (mutex_lock_killable(&fan_mutex))
 		return -ERESTARTSYS;
 
 	rc = fan_get_status(&status);
@@ -5895,29 +6502,7 @@
 		if (likely(acpi_ec_read(fan_status_offset,
 					&fan_control_initial_status))) {
 			fan_status_access_mode = TPACPI_FAN_RD_TPEC;
-
-			/* In some ThinkPads, neither the EC nor the ACPI
-			 * DSDT initialize the fan status, and it ends up
-			 * being set to 0x07 when it *could* be either
-			 * 0x07 or 0x80.
-			 *
-			 * Enable for TP-1Y (T43), TP-78 (R51e),
-			 * TP-76 (R52), TP-70 (T43, R52), which are known
-			 * to be buggy. */
-			if (fan_control_initial_status == 0x07) {
-				switch (thinkpad_id.ec_model) {
-				case 0x5931: /* TP-1Y */
-				case 0x3837: /* TP-78 */
-				case 0x3637: /* TP-76 */
-				case 0x3037: /* TP-70 */
-					printk(TPACPI_NOTICE
-					       "fan_init: initial fan status "
-					       "is unknown, assuming it is "
-					       "in auto mode\n");
-					tp_features.fan_ctrl_status_undef = 1;
-					;;
-				}
-			}
+			fan_quirk1_detect();
 		} else {
 			printk(TPACPI_ERR
 			       "ThinkPad ACPI EC access misbehaving, "
@@ -6106,15 +6691,6 @@
 		if (rc < 0)
 			return rc;
 
-		if (unlikely(tp_features.fan_ctrl_status_undef)) {
-			if (status != fan_control_initial_status)
-				tp_features.fan_ctrl_status_undef = 0;
-			else
-				/* Return most likely status. In fact, it
-				 * might be the only possible status */
-				status = TP_EC_FAN_AUTO;
-		}
-
 		len += sprintf(p + len, "status:\t\t%s\n",
 			       (status != 0) ? "enabled" : "disabled");
 
@@ -6563,6 +7139,10 @@
 		.init = wan_init,
 		.data = &wan_driver_data,
 	},
+	{
+		.init = uwb_init,
+		.data = &uwb_driver_data,
+	},
 #ifdef CONFIG_THINKPAD_ACPI_VIDEO
 	{
 		.init = video_init,
@@ -6701,6 +7281,32 @@
 TPACPI_PARAM(volume);
 TPACPI_PARAM(fan);
 
+#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
+module_param(dbg_wlswemul, uint, 0);
+MODULE_PARM_DESC(dbg_wlswemul, "Enables WLSW emulation");
+module_param_named(wlsw_state, tpacpi_wlsw_emulstate, bool, 0);
+MODULE_PARM_DESC(wlsw_state,
+		 "Initial state of the emulated WLSW switch");
+
+module_param(dbg_bluetoothemul, uint, 0);
+MODULE_PARM_DESC(dbg_bluetoothemul, "Enables bluetooth switch emulation");
+module_param_named(bluetooth_state, tpacpi_bluetooth_emulstate, bool, 0);
+MODULE_PARM_DESC(bluetooth_state,
+		 "Initial state of the emulated bluetooth switch");
+
+module_param(dbg_wwanemul, uint, 0);
+MODULE_PARM_DESC(dbg_wwanemul, "Enables WWAN switch emulation");
+module_param_named(wwan_state, tpacpi_wwan_emulstate, bool, 0);
+MODULE_PARM_DESC(wwan_state,
+		 "Initial state of the emulated WWAN switch");
+
+module_param(dbg_uwbemul, uint, 0);
+MODULE_PARM_DESC(dbg_uwbemul, "Enables UWB switch emulation");
+module_param_named(uwb_state, tpacpi_uwb_emulstate, bool, 0);
+MODULE_PARM_DESC(uwb_state,
+		 "Initial state of the emulated UWB switch");
+#endif
+
 static void thinkpad_acpi_module_exit(void)
 {
 	struct ibm_struct *ibm, *itmp;
diff --git a/drivers/power/pda_power.c b/drivers/power/pda_power.c
index d30bb76..b56a704 100644
--- a/drivers/power/pda_power.c
+++ b/drivers/power/pda_power.c
@@ -20,7 +20,7 @@
 
 static inline unsigned int get_irq_flags(struct resource *res)
 {
-	unsigned int flags = IRQF_DISABLED | IRQF_SHARED;
+	unsigned int flags = IRQF_SAMPLE_RANDOM | IRQF_SHARED;
 
 	flags |= res->flags & IRQF_TRIGGER_MASK;
 
diff --git a/drivers/ps3/ps3-lpm.c b/drivers/ps3/ps3-lpm.c
index 204158c..fe96793 100644
--- a/drivers/ps3/ps3-lpm.c
+++ b/drivers/ps3/ps3-lpm.c
@@ -732,7 +732,7 @@
 	case 8:
 		return pm_translate_signal_group_number_on_island8(subgroup);
 	default:
-		dev_dbg(sbd_core(), "%s:%u: island not found: %lu\n", __func__,
+		dev_dbg(sbd_core(), "%s:%u: island not found: %llu\n", __func__,
 			__LINE__, group);
 		BUG();
 		break;
@@ -765,7 +765,7 @@
 				 signal_select, attr1, attr2, attr3);
 	if (ret)
 		dev_err(sbd_core(),
-			"%s:%u: error:%d 0x%lx 0x%lx 0x%lx 0x%lx 0x%lx 0x%lx\n",
+			"%s:%u: error:%d 0x%llx 0x%llx 0x%llx 0x%llx 0x%llx 0x%llx\n",
 			__func__, __LINE__, ret, lv1_signal_group, bus_select,
 			signal_select, attr1, attr2, attr3);
 
@@ -908,7 +908,7 @@
 
 	lpm_priv->tb_count = tmp;
 
-	dev_dbg(sbd_core(), "%s:%u: tb_count %lu (%lxh)\n", __func__, __LINE__,
+	dev_dbg(sbd_core(), "%s:%u: tb_count %llu (%llxh)\n", __func__, __LINE__,
 		lpm_priv->tb_count, lpm_priv->tb_count);
 }
 EXPORT_SYMBOL_GPL(ps3_disable_pm);
@@ -938,7 +938,7 @@
 	if (offset >= lpm_priv->tb_count)
 		return 0;
 
-	count = min(count, lpm_priv->tb_count - offset);
+	count = min_t(u64, count, lpm_priv->tb_count - offset);
 
 	while (*bytes_copied < count) {
 		const unsigned long request = count - *bytes_copied;
@@ -993,7 +993,7 @@
 	if (offset >= lpm_priv->tb_count)
 		return 0;
 
-	count = min(count, lpm_priv->tb_count - offset);
+	count = min_t(u64, count, lpm_priv->tb_count - offset);
 
 	while (*bytes_copied < count) {
 		const unsigned long request = count - *bytes_copied;
@@ -1013,7 +1013,7 @@
 		result = copy_to_user(buf, lpm_priv->tb_cache, tmp);
 
 		if (result) {
-			dev_dbg(sbd_core(), "%s:%u: 0x%lx bytes at 0x%p\n",
+			dev_dbg(sbd_core(), "%s:%u: 0x%llx bytes at 0x%p\n",
 				__func__, __LINE__, tmp, buf);
 			dev_err(sbd_core(), "%s:%u: copy_to_user failed: %d\n",
 				__func__, __LINE__, result);
@@ -1148,8 +1148,8 @@
 	lpm_priv->shadow.group_control = PS3_LPM_SHADOW_REG_INIT;
 	lpm_priv->shadow.debug_bus_control = PS3_LPM_SHADOW_REG_INIT;
 
-	dev_dbg(sbd_core(), "%s:%u: lpm_id 0x%lx, outlet_id 0x%lx, "
-		"tb_size 0x%lx\n", __func__, __LINE__, lpm_priv->lpm_id,
+	dev_dbg(sbd_core(), "%s:%u: lpm_id 0x%llx, outlet_id 0x%llx, "
+		"tb_size 0x%llx\n", __func__, __LINE__, lpm_priv->lpm_id,
 		lpm_priv->outlet_id, tb_size);
 
 	return 0;
diff --git a/drivers/ps3/ps3-vuart.c b/drivers/ps3/ps3-vuart.c
index 90c097a..e4ad5ba 100644
--- a/drivers/ps3/ps3-vuart.c
+++ b/drivers/ps3/ps3-vuart.c
@@ -114,7 +114,7 @@
 static void __maybe_unused _dump_ports_bmp(
 	const struct ports_bmp *bmp, const char *func, int line)
 {
-	pr_debug("%s:%d: ports_bmp: %016lxh\n", func, line, bmp->status);
+	pr_debug("%s:%d: ports_bmp: %016llxh\n", func, line, bmp->status);
 }
 
 #define dump_port_params(_b) _dump_port_params(_b, __func__, __LINE__)
@@ -159,11 +159,13 @@
 	struct vuart_triggers *trig)
 {
 	int result;
-	unsigned long size;
-	unsigned long val;
+	u64 size;
+	u64 val;
+	u64 tx;
 
 	result = lv1_get_virtual_uart_param(dev->port_number,
-		PARAM_TX_TRIGGER, &trig->tx);
+		PARAM_TX_TRIGGER, &tx);
+	trig->tx = tx;
 
 	if (result) {
 		dev_dbg(&dev->core, "%s:%d: tx_trigger failed: %s\n",
@@ -201,7 +203,7 @@
 	unsigned int rx)
 {
 	int result;
-	unsigned long size;
+	u64 size;
 
 	result = lv1_set_virtual_uart_param(dev->port_number,
 		PARAM_TX_TRIGGER, tx);
@@ -248,7 +250,7 @@
 		dev_dbg(&dev->core, "%s:%d: rx_bytes failed: %s\n",
 			__func__, __LINE__, ps3_result(result));
 
-	dev_dbg(&dev->core, "%s:%d: %lxh\n", __func__, __LINE__,
+	dev_dbg(&dev->core, "%s:%d: %llxh\n", __func__, __LINE__,
 		*bytes_waiting);
 	return result;
 }
@@ -295,7 +297,7 @@
 
 	*status = tmp & priv->interrupt_mask;
 
-	dev_dbg(&dev->core, "%s:%d: m %lxh, s %lxh, m&s %lxh\n",
+	dev_dbg(&dev->core, "%s:%d: m %llxh, s %llxh, m&s %lxh\n",
 		__func__, __LINE__, priv->interrupt_mask, tmp, *status);
 
 	return result;
@@ -363,7 +365,7 @@
  */
 
 static int ps3_vuart_raw_write(struct ps3_system_bus_device *dev,
-	const void *buf, unsigned int bytes, unsigned long *bytes_written)
+	const void *buf, unsigned int bytes, u64 *bytes_written)
 {
 	int result;
 	struct ps3_vuart_port_priv *priv = to_port_priv(dev);
@@ -379,7 +381,7 @@
 
 	priv->stats.bytes_written += *bytes_written;
 
-	dev_dbg(&dev->core, "%s:%d: wrote %lxh/%xh=>%lxh\n", __func__, __LINE__,
+	dev_dbg(&dev->core, "%s:%d: wrote %llxh/%xh=>%lxh\n", __func__, __LINE__,
 		*bytes_written, bytes, priv->stats.bytes_written);
 
 	return result;
@@ -393,7 +395,7 @@
  */
 
 static int ps3_vuart_raw_read(struct ps3_system_bus_device *dev, void *buf,
-	unsigned int bytes, unsigned long *bytes_read)
+	unsigned int bytes, u64 *bytes_read)
 {
 	int result;
 	struct ps3_vuart_port_priv *priv = to_port_priv(dev);
@@ -411,7 +413,7 @@
 
 	priv->stats.bytes_read += *bytes_read;
 
-	dev_dbg(&dev->core, "%s:%d: read %lxh/%xh=>%lxh\n", __func__, __LINE__,
+	dev_dbg(&dev->core, "%s:%d: read %llxh/%xh=>%lxh\n", __func__, __LINE__,
 		*bytes_read, bytes, priv->stats.bytes_read);
 
 	return result;
@@ -500,7 +502,7 @@
 	spin_lock_irqsave(&priv->tx_list.lock, flags);
 
 	if (list_empty(&priv->tx_list.head)) {
-		unsigned long bytes_written;
+		u64 bytes_written;
 
 		result = ps3_vuart_raw_write(dev, buf, bytes, &bytes_written);
 
@@ -592,7 +594,7 @@
 	list_add_tail(&lb->link, &priv->rx_list.head);
 	priv->rx_list.bytes_held += bytes;
 
-	dev_dbg(&dev->core, "%s:%d: buf_%lu: queued %lxh bytes\n",
+	dev_dbg(&dev->core, "%s:%d: buf_%lu: queued %llxh bytes\n",
 		__func__, __LINE__, lb->dbg_number, bytes);
 
 	*bytes_queued = bytes;
@@ -745,7 +747,7 @@
 
 	list_for_each_entry_safe(lb, n, &priv->tx_list.head, link) {
 
-		unsigned long bytes_written;
+		u64 bytes_written;
 
 		result = ps3_vuart_raw_write(dev, lb->head, lb->tail - lb->head,
 			&bytes_written);
@@ -762,7 +764,7 @@
 		if (bytes_written < lb->tail - lb->head) {
 			lb->head += bytes_written;
 			dev_dbg(&dev->core,
-				"%s:%d cleared buf_%lu, %lxh bytes\n",
+				"%s:%d cleared buf_%lu, %llxh bytes\n",
 				__func__, __LINE__, lb->dbg_number,
 				bytes_written);
 			goto port_full;
diff --git a/drivers/ps3/ps3stor_lib.c b/drivers/ps3/ps3stor_lib.c
index 55955f1..18066d5 100644
--- a/drivers/ps3/ps3stor_lib.c
+++ b/drivers/ps3/ps3stor_lib.c
@@ -70,7 +70,7 @@
 			 __func__, __LINE__, n);
 	dev->region_idx = __ffs(dev->accessible_regions);
 	dev_info(&dev->sbd.core,
-		 "First accessible region has index %u start %lu size %lu\n",
+		 "First accessible region has index %u start %llu size %llu\n",
 		 dev->region_idx, dev->regions[dev->region_idx].start,
 		 dev->regions[dev->region_idx].size);
 
@@ -220,7 +220,7 @@
 	const char *op = write ? "write" : "read";
 	int res;
 
-	dev_dbg(&dev->sbd.core, "%s:%u: %s %lu sectors starting at %lu\n",
+	dev_dbg(&dev->sbd.core, "%s:%u: %s %llu sectors starting at %llu\n",
 		__func__, __LINE__, op, sectors, start_sector);
 
 	init_completion(&dev->done);
@@ -238,7 +238,7 @@
 
 	wait_for_completion(&dev->done);
 	if (dev->lv1_status) {
-		dev_dbg(&dev->sbd.core, "%s:%u: %s failed 0x%lx\n", __func__,
+		dev_dbg(&dev->sbd.core, "%s:%u: %s failed 0x%llx\n", __func__,
 			__LINE__, op, dev->lv1_status);
 		return dev->lv1_status;
 	}
@@ -268,7 +268,7 @@
 {
 	int res;
 
-	dev_dbg(&dev->sbd.core, "%s:%u: send device command 0x%lx\n", __func__,
+	dev_dbg(&dev->sbd.core, "%s:%u: send device command 0x%llx\n", __func__,
 		__LINE__, cmd);
 
 	init_completion(&dev->done);
@@ -277,19 +277,19 @@
 					      arg2, arg3, arg4, &dev->tag);
 	if (res) {
 		dev_err(&dev->sbd.core,
-			"%s:%u: send_device_command 0x%lx failed %d\n",
+			"%s:%u: send_device_command 0x%llx failed %d\n",
 			__func__, __LINE__, cmd, res);
 		return -1;
 	}
 
 	wait_for_completion(&dev->done);
 	if (dev->lv1_status) {
-		dev_dbg(&dev->sbd.core, "%s:%u: command 0x%lx failed 0x%lx\n",
+		dev_dbg(&dev->sbd.core, "%s:%u: command 0x%llx failed 0x%llx\n",
 			__func__, __LINE__, cmd, dev->lv1_status);
 		return dev->lv1_status;
 	}
 
-	dev_dbg(&dev->sbd.core, "%s:%u: command 0x%lx completed\n", __func__,
+	dev_dbg(&dev->sbd.core, "%s:%u: command 0x%llx completed\n", __func__,
 		__LINE__, cmd);
 
 	return 0;
diff --git a/drivers/regulator/wm8400-regulator.c b/drivers/regulator/wm8400-regulator.c
index 48b372e..56e23d4 100644
--- a/drivers/regulator/wm8400-regulator.c
+++ b/drivers/regulator/wm8400-regulator.c
@@ -289,7 +289,7 @@
 	},
 };
 
-static int __init wm8400_regulator_probe(struct platform_device *pdev)
+static int __devinit wm8400_regulator_probe(struct platform_device *pdev)
 {
 	struct regulator_dev *rdev;
 
diff --git a/drivers/rtc/rtc-pxa.c b/drivers/rtc/rtc-pxa.c
index cc7eb87..bd56a03 100644
--- a/drivers/rtc/rtc-pxa.c
+++ b/drivers/rtc/rtc-pxa.c
@@ -27,6 +27,8 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 
+#include <mach/hardware.h>
+
 #define TIMER_FREQ		CLOCK_TICK_RATE
 #define RTC_DEF_DIVIDER		(32768 - 1)
 #define RTC_DEF_TRIM		0
diff --git a/drivers/rtc/rtc-twl4030.c b/drivers/rtc/rtc-twl4030.c
index 8ce5f74..ad35f76 100644
--- a/drivers/rtc/rtc-twl4030.c
+++ b/drivers/rtc/rtc-twl4030.c
@@ -120,7 +120,7 @@
 static unsigned char rtc_irq_bits;
 
 /*
- * Enable timer and/or alarm interrupts.
+ * Enable 1/second update and/or alarm interrupts.
  */
 static int set_rtc_irq_bit(unsigned char bit)
 {
@@ -128,6 +128,7 @@
 	int ret;
 
 	val = rtc_irq_bits | bit;
+	val &= ~BIT_RTC_INTERRUPTS_REG_EVERY_M;
 	ret = twl4030_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG);
 	if (ret == 0)
 		rtc_irq_bits = val;
@@ -136,7 +137,7 @@
 }
 
 /*
- * Disable timer and/or alarm interrupts.
+ * Disable update and/or alarm interrupts.
  */
 static int mask_rtc_irq_bit(unsigned char bit)
 {
@@ -151,7 +152,7 @@
 	return ret;
 }
 
-static inline int twl4030_rtc_alarm_irq_set_state(int enabled)
+static int twl4030_rtc_alarm_irq_enable(struct device *dev, unsigned enabled)
 {
 	int ret;
 
@@ -163,7 +164,7 @@
 	return ret;
 }
 
-static inline int twl4030_rtc_irq_set_state(int enabled)
+static int twl4030_rtc_update_irq_enable(struct device *dev, unsigned enabled)
 {
 	int ret;
 
@@ -292,7 +293,7 @@
 	unsigned char alarm_data[ALL_TIME_REGS + 1];
 	int ret;
 
-	ret = twl4030_rtc_alarm_irq_set_state(0);
+	ret = twl4030_rtc_alarm_irq_enable(dev, 0);
 	if (ret)
 		goto out;
 
@@ -312,35 +313,11 @@
 	}
 
 	if (alm->enabled)
-		ret = twl4030_rtc_alarm_irq_set_state(1);
+		ret = twl4030_rtc_alarm_irq_enable(dev, 1);
 out:
 	return ret;
 }
 
-#ifdef	CONFIG_RTC_INTF_DEV
-
-static int twl4030_rtc_ioctl(struct device *dev, unsigned int cmd,
-			     unsigned long arg)
-{
-	switch (cmd) {
-	case RTC_AIE_OFF:
-		return twl4030_rtc_alarm_irq_set_state(0);
-	case RTC_AIE_ON:
-		return twl4030_rtc_alarm_irq_set_state(1);
-	case RTC_UIE_OFF:
-		return twl4030_rtc_irq_set_state(0);
-	case RTC_UIE_ON:
-		return twl4030_rtc_irq_set_state(1);
-
-	default:
-		return -ENOIOCTLCMD;
-	}
-}
-
-#else
-#define	twl4030_rtc_ioctl	NULL
-#endif
-
 static irqreturn_t twl4030_rtc_interrupt(int irq, void *rtc)
 {
 	unsigned long events = 0;
@@ -400,11 +377,12 @@
 }
 
 static struct rtc_class_ops twl4030_rtc_ops = {
-	.ioctl		= twl4030_rtc_ioctl,
 	.read_time	= twl4030_rtc_read_time,
 	.set_time	= twl4030_rtc_set_time,
 	.read_alarm	= twl4030_rtc_read_alarm,
 	.set_alarm	= twl4030_rtc_set_alarm,
+	.alarm_irq_enable = twl4030_rtc_alarm_irq_enable,
+	.update_irq_enable = twl4030_rtc_update_irq_enable,
 };
 
 /*----------------------------------------------------------------------*/
@@ -422,7 +400,7 @@
 	rtc = rtc_device_register(pdev->name,
 				  &pdev->dev, &twl4030_rtc_ops, THIS_MODULE);
 	if (IS_ERR(rtc)) {
-		ret = -EINVAL;
+		ret = PTR_ERR(rtc);
 		dev_err(&pdev->dev, "can't register RTC device, err %ld\n",
 			PTR_ERR(rtc));
 		goto out0;
@@ -432,7 +410,6 @@
 	platform_set_drvdata(pdev, rtc);
 
 	ret = twl4030_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG);
-
 	if (ret < 0)
 		goto out1;
 
@@ -475,7 +452,6 @@
 
 	return ret;
 
-
 out2:
 	free_irq(irq, rtc);
 out1:
@@ -506,8 +482,9 @@
 
 static void twl4030_rtc_shutdown(struct platform_device *pdev)
 {
-	mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M |
-			 BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
+	/* mask timer interrupts, but leave alarm interrupts on to enable
+	   power-on when alarm is triggered */
+	mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c
index acca667..49c3bfa 100644
--- a/drivers/s390/net/lcs.c
+++ b/drivers/s390/net/lcs.c
@@ -70,7 +70,9 @@
 static void lcs_tasklet(unsigned long);
 static void lcs_start_kernel_thread(struct work_struct *);
 static void lcs_get_frames_cb(struct lcs_channel *, struct lcs_buffer *);
+#ifdef CONFIG_IP_MULTICAST
 static int lcs_send_delipm(struct lcs_card *, struct lcs_ipm_list *);
+#endif /* CONFIG_IP_MULTICAST */
 static int lcs_recovery(void *ptr);
 
 /**
@@ -1285,6 +1287,8 @@
 	lcs_clear_thread_running_bit(card, LCS_SET_MC_THREAD);
 	return 0;
 }
+#endif /* CONFIG_IP_MULTICAST */
+
 /**
  * function called by net device to
  * handle multicast address relevant things
@@ -1292,6 +1296,7 @@
 static void
 lcs_set_multicast_list(struct net_device *dev)
 {
+#ifdef CONFIG_IP_MULTICAST
         struct lcs_card *card;
 
         LCS_DBF_TEXT(4, trace, "setmulti");
@@ -1299,9 +1304,8 @@
 
         if (!lcs_set_thread_start_bit(card, LCS_SET_MC_THREAD))
 		schedule_work(&card->kernel_thread_starter);
-}
-
 #endif /* CONFIG_IP_MULTICAST */
+}
 
 static long
 lcs_check_irb_error(struct ccw_device *cdev, struct irb *irb)
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index ee0739b..a1a511b 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -933,7 +933,7 @@
 			fc_host_speed(shost) = FC_PORTSPEED_16GBIT;
 			break;
 		default:
-			ibmvfc_log(vhost, 3, "Unknown port speed: %ld Gbit\n",
+			ibmvfc_log(vhost, 3, "Unknown port speed: %lld Gbit\n",
 				   vhost->login_buf->resp.link_speed / 100);
 			fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;
 			break;
@@ -1322,7 +1322,9 @@
 					       &evt->ext_list_token);
 
 		if (!evt->ext_list) {
-			scmd_printk(KERN_ERR, scmd, "Can't allocate memory for scatterlist\n");
+			scsi_dma_unmap(scmd);
+			if (vhost->log_level > IBMVFC_DEFAULT_LOG_LEVEL)
+				scmd_printk(KERN_ERR, scmd, "Can't allocate memory for scatterlist\n");
 			return -ENOMEM;
 		}
 	}
@@ -2149,8 +2151,8 @@
 {
 	const char *desc = ibmvfc_get_ae_desc(crq->event);
 
-	ibmvfc_log(vhost, 3, "%s event received. scsi_id: %lx, wwpn: %lx,"
-		   " node_name: %lx\n", desc, crq->scsi_id, crq->wwpn, crq->node_name);
+	ibmvfc_log(vhost, 3, "%s event received. scsi_id: %llx, wwpn: %llx,"
+		   " node_name: %llx\n", desc, crq->scsi_id, crq->wwpn, crq->node_name);
 
 	switch (crq->event) {
 	case IBMVFC_AE_LINK_UP:
@@ -2184,7 +2186,7 @@
 		ibmvfc_link_down(vhost, IBMVFC_HALTED);
 		break;
 	default:
-		dev_err(vhost->dev, "Unknown async event received: %ld\n", crq->event);
+		dev_err(vhost->dev, "Unknown async event received: %lld\n", crq->event);
 		break;
 	};
 }
@@ -2261,13 +2263,13 @@
 	 * actually sent
 	 */
 	if (unlikely(!ibmvfc_valid_event(&vhost->pool, evt))) {
-		dev_err(vhost->dev, "Returned correlation_token 0x%08lx is invalid!\n",
+		dev_err(vhost->dev, "Returned correlation_token 0x%08llx is invalid!\n",
 			crq->ioba);
 		return;
 	}
 
 	if (unlikely(atomic_read(&evt->free))) {
-		dev_err(vhost->dev, "Received duplicate correlation_token 0x%08lx!\n",
+		dev_err(vhost->dev, "Received duplicate correlation_token 0x%08llx!\n",
 			crq->ioba);
 		return;
 	}
@@ -3259,7 +3261,7 @@
 
 	tgt = mempool_alloc(vhost->tgt_pool, GFP_KERNEL);
 	if (!tgt) {
-		dev_err(vhost->dev, "Target allocation failure for scsi id %08lx\n",
+		dev_err(vhost->dev, "Target allocation failure for scsi id %08llx\n",
 			scsi_id);
 		return -ENOMEM;
 	}
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.h b/drivers/scsi/ibmvscsi/ibmvfc.h
index babdf3d..87dafd0 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.h
+++ b/drivers/scsi/ibmvscsi/ibmvfc.h
@@ -691,13 +691,13 @@
 #define DBG_CMD(CMD) do { if (ibmvfc_debug) CMD; } while (0)
 
 #define tgt_dbg(t, fmt, ...)			\
-	DBG_CMD(dev_info((t)->vhost->dev, "%lX: " fmt, (t)->scsi_id, ##__VA_ARGS__))
+	DBG_CMD(dev_info((t)->vhost->dev, "%llX: " fmt, (t)->scsi_id, ##__VA_ARGS__))
 
 #define tgt_info(t, fmt, ...)		\
-	dev_info((t)->vhost->dev, "%lX: " fmt, (t)->scsi_id, ##__VA_ARGS__)
+	dev_info((t)->vhost->dev, "%llX: " fmt, (t)->scsi_id, ##__VA_ARGS__)
 
 #define tgt_err(t, fmt, ...)		\
-	dev_err((t)->vhost->dev, "%lX: " fmt, (t)->scsi_id, ##__VA_ARGS__)
+	dev_err((t)->vhost->dev, "%llX: " fmt, (t)->scsi_id, ##__VA_ARGS__)
 
 #define ibmvfc_dbg(vhost, ...) \
 	DBG_CMD(dev_info((vhost)->dev, ##__VA_ARGS__))
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 5c541f7..74d07d1 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -1061,7 +1061,7 @@
 	}
 
 	sdev_printk(KERN_INFO, cmd->device,
-                    "aborting command. lun 0x%lx, tag 0x%lx\n",
+                    "aborting command. lun 0x%llx, tag 0x%llx\n",
 		    (((u64) lun) << 48), (u64) found_evt);
 
 	wait_for_completion(&evt->comp);
@@ -1082,7 +1082,7 @@
 	if (rsp_rc) {
 		if (printk_ratelimit())
 			sdev_printk(KERN_WARNING, cmd->device,
-				    "abort code %d for task tag 0x%lx\n",
+				    "abort code %d for task tag 0x%llx\n",
 				    rsp_rc, tsk_mgmt->task_tag);
 		return FAILED;
 	}
@@ -1102,12 +1102,12 @@
 
 	if (found_evt == NULL) {
 		spin_unlock_irqrestore(hostdata->host->host_lock, flags);
-		sdev_printk(KERN_INFO, cmd->device, "aborted task tag 0x%lx completed\n",
+		sdev_printk(KERN_INFO, cmd->device, "aborted task tag 0x%llx completed\n",
 			    tsk_mgmt->task_tag);
 		return SUCCESS;
 	}
 
-	sdev_printk(KERN_INFO, cmd->device, "successfully aborted task tag 0x%lx\n",
+	sdev_printk(KERN_INFO, cmd->device, "successfully aborted task tag 0x%llx\n",
 		    tsk_mgmt->task_tag);
 
 	cmd->result = (DID_ABORT << 16);
@@ -1182,7 +1182,7 @@
 		return FAILED;
 	}
 
-	sdev_printk(KERN_INFO, cmd->device, "resetting device. lun 0x%lx\n",
+	sdev_printk(KERN_INFO, cmd->device, "resetting device. lun 0x%llx\n",
 		    (((u64) lun) << 48));
 
 	wait_for_completion(&evt->comp);
@@ -1203,7 +1203,7 @@
 	if (rsp_rc) {
 		if (printk_ratelimit())
 			sdev_printk(KERN_WARNING, cmd->device,
-				    "reset code %d for task tag 0x%lx\n",
+				    "reset code %d for task tag 0x%llx\n",
 				    rsp_rc, tsk_mgmt->task_tag);
 		return FAILED;
 	}
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 841f460..0782900 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -4912,7 +4912,7 @@
 	if (res && ipr_is_gata(res)) {
 		if (cmd == HDIO_GET_IDENTITY)
 			return -ENOTTY;
-		return ata_scsi_ioctl(sdev, cmd, arg);
+		return ata_sas_scsi_ioctl(res->sata_port->ap, sdev, cmd, arg);
 	}
 
 	return -EINVAL;
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 7225b6e..257c241 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -1981,6 +1981,7 @@
 		kfree(q->pool[i]);
 	if (q->pool)
 		kfree(q->pool);
+	kfree(q->queue);
 }
 EXPORT_SYMBOL_GPL(iscsi_pool_free);
 
diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c
index a745f91..e7705d3 100644
--- a/drivers/scsi/libiscsi_tcp.c
+++ b/drivers/scsi/libiscsi_tcp.c
@@ -177,7 +177,6 @@
 			   struct iscsi_segment *segment, int recv,
 			   unsigned copied)
 {
-	static unsigned char padbuf[ISCSI_PAD_LEN];
 	struct scatterlist sg;
 	unsigned int pad;
 
@@ -233,7 +232,7 @@
 			debug_tcp("consume %d pad bytes\n", pad);
 			segment->total_size += pad;
 			segment->size = pad;
-			segment->data = padbuf;
+			segment->data = segment->padbuf;
 			return 0;
 		}
 	}
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index 7448387..1c558d3 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -717,7 +717,7 @@
 	struct domain_device *dev = sdev_to_domain_dev(sdev);
 
 	if (dev_is_sata(dev))
-		return ata_scsi_ioctl(sdev, cmd, arg);
+		return ata_sas_scsi_ioctl(dev->sata_dev.ap, sdev, cmd, arg);
 
 	return -EINVAL;
 }
diff --git a/drivers/scsi/ps3rom.c b/drivers/scsi/ps3rom.c
index ce48e2d..ca0dd33 100644
--- a/drivers/scsi/ps3rom.c
+++ b/drivers/scsi/ps3rom.c
@@ -290,11 +290,11 @@
 
 	if (tag != dev->tag)
 		dev_err(&dev->sbd.core,
-			"%s:%u: tag mismatch, got %lx, expected %lx\n",
+			"%s:%u: tag mismatch, got %llx, expected %llx\n",
 			__func__, __LINE__, tag, dev->tag);
 
 	if (res) {
-		dev_err(&dev->sbd.core, "%s:%u: res=%d status=0x%lx\n",
+		dev_err(&dev->sbd.core, "%s:%u: res=%d status=0x%llx\n",
 			__func__, __LINE__, res, status);
 		return IRQ_HANDLED;
 	}
@@ -364,7 +364,7 @@
 
 	if (dev->blk_size != CD_FRAMESIZE) {
 		dev_err(&dev->sbd.core,
-			"%s:%u: cannot handle block size %lu\n", __func__,
+			"%s:%u: cannot handle block size %llu\n", __func__,
 			__LINE__, dev->blk_size);
 		return -EINVAL;
 	}
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index c7acef5..33a3c13 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1016,6 +1016,9 @@
 	struct Scsi_Host *host = rport_to_shost(rport);
 	fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
 
+	if (!fcport)
+		return;
+
 	qla2x00_abort_fcport_cmds(fcport);
 
 	/*
@@ -1033,6 +1036,9 @@
 {
 	fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
 
+	if (!fcport)
+		return;
+
 	/*
 	 * At this point all fcport's software-states are cleared.  Perform any
 	 * final cleanup of firmware resources (PCBs and XCBs).
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index ba49133..a336b4b 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -34,6 +34,7 @@
 extern void qla81xx_update_fw_options(scsi_qla_host_t *);
 extern int qla2x00_load_risc(struct scsi_qla_host *, uint32_t *);
 extern int qla24xx_load_risc(scsi_qla_host_t *, uint32_t *);
+extern int qla81xx_load_risc(scsi_qla_host_t *, uint32_t *);
 
 extern int qla2x00_loop_resync(scsi_qla_host_t *);
 
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 2d4f32b..f6368a1 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1258,35 +1258,48 @@
 {
 	int	rval;
 	unsigned long flags = 0;
-	int cnt;
+	int cnt, que;
 	struct qla_hw_data *ha = vha->hw;
-	struct req_que *req = ha->req_q_map[0];
-	struct rsp_que *rsp = ha->rsp_q_map[0];
+	struct req_que *req;
+	struct rsp_que *rsp;
+	struct scsi_qla_host *vp;
 	struct mid_init_cb_24xx *mid_init_cb =
 	    (struct mid_init_cb_24xx *) ha->init_cb;
 
 	spin_lock_irqsave(&ha->hardware_lock, flags);
 
 	/* Clear outstanding commands array. */
-	for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS; cnt++)
-		req->outstanding_cmds[cnt] = NULL;
+	for (que = 0; que < ha->max_queues; que++) {
+		req = ha->req_q_map[que];
+		if (!req)
+			continue;
+		for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS; cnt++)
+			req->outstanding_cmds[cnt] = NULL;
 
-	req->current_outstanding_cmd = 0;
+		req->current_outstanding_cmd = 0;
+
+		/* Initialize firmware. */
+		req->ring_ptr  = req->ring;
+		req->ring_index    = 0;
+		req->cnt      = req->length;
+	}
+
+	for (que = 0; que < ha->max_queues; que++) {
+		rsp = ha->rsp_q_map[que];
+		if (!rsp)
+			continue;
+		rsp->ring_ptr = rsp->ring;
+		rsp->ring_index    = 0;
+
+		/* Initialize response queue entries */
+		qla2x00_init_response_q_entries(rsp);
+	}
 
 	/* Clear RSCN queue. */
-	vha->rscn_in_ptr = 0;
-	vha->rscn_out_ptr = 0;
-
-	/* Initialize firmware. */
-	req->ring_ptr  = req->ring;
-	req->ring_index    = 0;
-	req->cnt      = req->length;
-	rsp->ring_ptr = rsp->ring;
-	rsp->ring_index    = 0;
-
-	/* Initialize response queue entries */
-	qla2x00_init_response_q_entries(rsp);
-
+	list_for_each_entry(vp, &ha->vp_list, list) {
+		vp->rscn_in_ptr = 0;
+		vp->rscn_out_ptr = 0;
+	}
 	ha->isp_ops->config_rings(vha);
 
 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
@@ -3212,8 +3225,8 @@
 	int rval = QLA_SUCCESS;
 	uint32_t wait_time;
 	struct qla_hw_data *ha = vha->hw;
-	struct req_que *req = ha->req_q_map[0];
-	struct rsp_que *rsp = ha->rsp_q_map[0];
+	struct req_que *req = ha->req_q_map[vha->req_ques[0]];
+	struct rsp_que *rsp = req->rsp;
 
 	atomic_set(&vha->loop_state, LOOP_UPDATE);
 	clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags);
@@ -3492,6 +3505,7 @@
 		}
 		req = ha->req_q_map[i];
 		if (req) {
+		/* Clear outstanding commands array. */
 			req->options &= ~BIT_0;
 			ret = qla25xx_init_req_que(base_vha, req, req->options);
 			if (ret != QLA_SUCCESS)
@@ -3500,7 +3514,7 @@
 						req->id));
 			else
 				DEBUG2_17(printk(KERN_WARNING
-					"%s Rsp que:%d inited\n", __func__,
+					"%s Req que:%d inited\n", __func__,
 						req->id));
 		}
 	}
@@ -3548,6 +3562,9 @@
 	WRT_REG_DWORD(&reg->hccr, HCCRX_REL_RISC_PAUSE);
 	RD_REG_DWORD(&reg->hccr);
 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+	if (IS_NOPOLLING_TYPE(ha))
+		ha->isp_ops->enable_intrs(ha);
 }
 
 /* On sparc systems, obtain port and node WWN from firmware
@@ -3833,6 +3850,10 @@
 	uint32_t i;
 	struct qla_hw_data *ha = vha->hw;
 	struct req_que *req = ha->req_q_map[0];
+
+	qla_printk(KERN_INFO, ha,
+	    "FW: Loading from flash (%x)...\n", ha->flt_region_fw);
+
 	rval = QLA_SUCCESS;
 
 	segments = FA_RISC_CODE_SEGMENTS;
@@ -4008,8 +4029,8 @@
 	return QLA_FUNCTION_FAILED;
 }
 
-int
-qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
+static int
+qla24xx_load_risc_blob(scsi_qla_host_t *vha, uint32_t *srisc_addr)
 {
 	int	rval;
 	int	segments, fragment;
@@ -4029,12 +4050,12 @@
 		qla_printk(KERN_ERR, ha, "Firmware images can be retrieved "
 		    "from: " QLA_FW_URL ".\n");
 
-		/* Try to load RISC code from flash. */
-		qla_printk(KERN_ERR, ha, "Attempting to load (potentially "
-		    "outdated) firmware from flash.\n");
-		return qla24xx_load_risc_flash(vha, srisc_addr);
+		return QLA_FUNCTION_FAILED;
 	}
 
+	qla_printk(KERN_INFO, ha,
+	    "FW: Loading via request-firmware...\n");
+
 	rval = QLA_SUCCESS;
 
 	segments = FA_RISC_CODE_SEGMENTS;
@@ -4119,6 +4140,40 @@
 	return QLA_FUNCTION_FAILED;
 }
 
+int
+qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
+{
+	int rval;
+
+	/*
+	 * FW Load priority:
+	 * 1) Firmware via request-firmware interface (.bin file).
+	 * 2) Firmware residing in flash.
+	 */
+	rval = qla24xx_load_risc_blob(vha, srisc_addr);
+	if (rval == QLA_SUCCESS)
+		return rval;
+
+	return qla24xx_load_risc_flash(vha, srisc_addr);
+}
+
+int
+qla81xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
+{
+	int rval;
+
+	/*
+	 * FW Load priority:
+	 * 1) Firmware residing in flash.
+	 * 2) Firmware via request-firmware interface (.bin file).
+	 */
+	rval = qla24xx_load_risc_flash(vha, srisc_addr);
+	if (rval == QLA_SUCCESS)
+		return rval;
+
+	return qla24xx_load_risc_blob(vha, srisc_addr);
+}
+
 void
 qla2x00_try_to_stop_firmware(scsi_qla_host_t *vha)
 {
@@ -4151,8 +4206,8 @@
 	uint16_t mb[MAILBOX_REGISTER_COUNT];
 	struct qla_hw_data *ha = vha->hw;
 	struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);
-	struct req_que *req = ha->req_q_map[0];
-	struct rsp_que *rsp = ha->rsp_q_map[0];
+	struct req_que *req = ha->req_q_map[vha->req_ques[0]];
+	struct rsp_que *rsp = req->rsp;
 
 	if (!vha->vp_idx)
 		return -EINVAL;
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 789fc57..e28ad81 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1868,6 +1868,7 @@
 static int
 qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp)
 {
+#define MIN_MSIX_COUNT	2
 	int i, ret;
 	struct msix_entry *entries;
 	struct qla_msix_entry *qentry;
@@ -1883,12 +1884,16 @@
 
 	ret = pci_enable_msix(ha->pdev, entries, ha->msix_count);
 	if (ret) {
+		if (ret < MIN_MSIX_COUNT)
+			goto msix_failed;
+
 		qla_printk(KERN_WARNING, ha,
 			"MSI-X: Failed to enable support -- %d/%d\n"
 			" Retry with %d vectors\n", ha->msix_count, ret, ret);
 		ha->msix_count = ret;
 		ret = pci_enable_msix(ha->pdev, entries, ha->msix_count);
 		if (ret) {
+msix_failed:
 			qla_printk(KERN_WARNING, ha, "MSI-X: Failed to enable"
 				" support, giving up -- %d/%d\n",
 				ha->msix_count, ret);
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index db4df45..f94ffbb 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -58,14 +58,11 @@
 	 * seconds. This is to serialize actual issuing of mailbox cmds during
 	 * non ISP abort time.
 	 */
-	if (!abort_active) {
-		if (!wait_for_completion_timeout(&ha->mbx_cmd_comp,
-		    mcp->tov * HZ)) {
-			/* Timeout occurred. Return error. */
-			DEBUG2_3_11(printk("%s(%ld): cmd access timeout. "
-			    "Exiting.\n", __func__, base_vha->host_no));
-			return QLA_FUNCTION_TIMEOUT;
-		}
+	if (!wait_for_completion_timeout(&ha->mbx_cmd_comp, mcp->tov * HZ)) {
+		/* Timeout occurred. Return error. */
+		DEBUG2_3_11(printk("%s(%ld): cmd access timeout. "
+		    "Exiting.\n", __func__, base_vha->host_no));
+		return QLA_FUNCTION_TIMEOUT;
 	}
 
 	ha->flags.mbox_busy = 1;
@@ -265,8 +262,7 @@
 	}
 
 	/* Allow next mbx cmd to come in. */
-	if (!abort_active)
-		complete(&ha->mbx_cmd_comp);
+	complete(&ha->mbx_cmd_comp);
 
 	if (rval) {
 		DEBUG2_3_11(printk("%s(%ld): **** FAILED. mbx0=%x, mbx1=%x, "
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index 8863231..f53179c4 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -629,6 +629,7 @@
 	req->ring_index = 0;
 	req->cnt = req->length;
 	req->id = que_id;
+	req->max_q_depth = ha->req_q_map[0]->max_q_depth;
 	mutex_unlock(&ha->vport_lock);
 
 	ret = qla25xx_init_req_que(base_vha, req, options);
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 4a71f52..c11f872 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -65,8 +65,6 @@
 
 static void qla2x00_free_device(scsi_qla_host_t *);
 
-static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha);
-
 int ql2xfdmienable=1;
 module_param(ql2xfdmienable, int, S_IRUGO|S_IRUSR);
 MODULE_PARM_DESC(ql2xfdmienable,
@@ -800,6 +798,7 @@
 		if (ha->isp_ops->abort_command(vha, sp, req)) {
 			DEBUG2(printk("%s(%ld): abort_command "
 			"mbx failed.\n", __func__, vha->host_no));
+			ret = FAILED;
 		} else {
 			DEBUG3(printk("%s(%ld): abort_command "
 			"mbx success.\n", __func__, vha->host_no));
@@ -1158,8 +1157,8 @@
 	struct req_que *req;
 
 	spin_lock_irqsave(&ha->hardware_lock, flags);
-	for (que = 0; que < QLA_MAX_HOST_QUES; que++) {
-		req = ha->req_q_map[vha->req_ques[que]];
+	for (que = 0; que < ha->max_queues; que++) {
+		req = ha->req_q_map[que];
 		if (!req)
 			continue;
 		for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
@@ -1193,7 +1192,7 @@
 	scsi_qla_host_t *vha = shost_priv(sdev->host);
 	struct qla_hw_data *ha = vha->hw;
 	struct fc_rport *rport = starget_to_rport(sdev->sdev_target);
-	struct req_que *req = ha->req_q_map[0];
+	struct req_que *req = ha->req_q_map[vha->req_ques[0]];
 
 	if (sdev->tagged_supported)
 		scsi_activate_tcq(sdev, req->max_q_depth);
@@ -1241,9 +1240,8 @@
  * supported addressing method.
  */
 static void
-qla2x00_config_dma_addressing(scsi_qla_host_t *vha)
+qla2x00_config_dma_addressing(struct qla_hw_data *ha)
 {
-	struct qla_hw_data *ha = vha->hw;
 	/* Assume a 32bit DMA mask. */
 	ha->flags.enable_64bit_addressing = 0;
 
@@ -1480,7 +1478,7 @@
 	.reset_adapter		= qla24xx_reset_adapter,
 	.nvram_config		= qla81xx_nvram_config,
 	.update_fw_options	= qla81xx_update_fw_options,
-	.load_risc		= qla24xx_load_risc,
+	.load_risc		= qla81xx_load_risc,
 	.pci_info_str		= qla24xx_pci_info_str,
 	.fw_version_str		= qla24xx_fw_version_str,
 	.intr_handler		= qla24xx_intr_handler,
@@ -1869,6 +1867,7 @@
 
 	set_bit(0, (unsigned long *) ha->vp_idx_map);
 
+	qla2x00_config_dma_addressing(ha);
 	ret = qla2x00_mem_alloc(ha, req_length, rsp_length, &req, &rsp);
 	if (!ret) {
 		qla_printk(KERN_WARNING, ha,
@@ -1888,13 +1887,13 @@
 		    "[ERROR] Failed to allocate memory for scsi_host\n");
 
 		ret = -ENOMEM;
+		qla2x00_mem_free(ha);
+		qla2x00_free_que(ha, req, rsp);
 		goto probe_hw_failed;
 	}
 
 	pci_set_drvdata(pdev, base_vha);
 
-	qla2x00_config_dma_addressing(base_vha);
-
 	host = base_vha->host;
 	base_vha->req_ques[0] = req->id;
 	host->can_queue = req->length + 128;
@@ -1917,14 +1916,13 @@
 	/* Set up the irqs */
 	ret = qla2x00_request_irqs(ha, rsp);
 	if (ret)
-		goto probe_failed;
-
+		goto probe_init_failed;
 	/* Alloc arrays of request and response ring ptrs */
 	if (!qla2x00_alloc_queues(ha)) {
 		qla_printk(KERN_WARNING, ha,
 		"[ERROR] Failed to allocate memory for queue"
 		" pointers\n");
-		goto probe_failed;
+		goto probe_init_failed;
 	}
 	ha->rsp_q_map[0] = rsp;
 	ha->req_q_map[0] = req;
@@ -1997,8 +1995,11 @@
 
 	return 0;
 
-probe_failed:
+probe_init_failed:
 	qla2x00_free_que(ha, req, rsp);
+	ha->max_queues = 0;
+
+probe_failed:
 	qla2x00_free_device(base_vha);
 
 	scsi_host_put(base_vha->host);
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index 303f8ee..9c3b694 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -944,9 +944,9 @@
 	if (!ha->fdt_wrt_disable)
 		return;
 
-	/* Disable flash write-protection. */
+	/* Disable flash write-protection, first clear SR protection bit */
 	qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0);
-	/* Some flash parts need an additional zero-write to clear bits.*/
+	/* Then write zero again to clear remaining SR bits.*/
 	qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0);
 }
 
@@ -980,12 +980,11 @@
     uint32_t dwords)
 {
 	int ret;
-	uint32_t liter, miter;
+	uint32_t liter;
 	uint32_t sec_mask, rest_addr;
-	uint32_t fdata, findex;
+	uint32_t fdata;
 	dma_addr_t optrom_dma;
 	void *optrom = NULL;
-	uint32_t *s, *d;
 	struct qla_hw_data *ha = vha->hw;
 
 	ret = QLA_SUCCESS;
@@ -1003,17 +1002,15 @@
 	}
 
 	rest_addr = (ha->fdt_block_size >> 2) - 1;
-	sec_mask = (ha->optrom_size >> 2) - (ha->fdt_block_size >> 2);
+	sec_mask = ~rest_addr;
 
 	qla24xx_unprotect_flash(ha);
 
 	for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) {
-
-		findex = faddr;
-		fdata = (findex & sec_mask) << 2;
+		fdata = (faddr & sec_mask) << 2;
 
 		/* Are we at the beginning of a sector? */
-		if ((findex & rest_addr) == 0) {
+		if ((faddr & rest_addr) == 0) {
 			/* Do sector unprotect. */
 			if (ha->fdt_unprotect_sec_cmd)
 				qla24xx_write_flash_dword(ha,
@@ -1024,7 +1021,7 @@
 			    (fdata & 0xff00) |((fdata << 16) &
 			    0xff0000) | ((fdata >> 16) & 0xff));
 			if (ret != QLA_SUCCESS) {
-				DEBUG9(qla_printk("Unable to flash sector: "
+				DEBUG9(qla_printk("Unable to erase sector: "
 				    "address=%x.\n", faddr));
 				break;
 			}
@@ -1033,9 +1030,7 @@
 		/* Go with burst-write. */
 		if (optrom && (liter + OPTROM_BURST_DWORDS) <= dwords) {
 			/* Copy data to DMA'ble buffer. */
-			for (miter = 0, s = optrom, d = dwptr;
-			    miter < OPTROM_BURST_DWORDS; miter++, s++, d++)
-				*s = cpu_to_le32(*d);
+			memcpy(optrom, dwptr, OPTROM_BURST_SIZE);
 
 			ret = qla2x00_load_ram(vha, optrom_dma,
 			    flash_data_addr(ha, faddr),
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 808bab6..cfa4c11 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.03.00-k1"
+#define QLA2XXX_VERSION      "8.03.00-k2"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	3
diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h
index d6be076..b586f27 100644
--- a/drivers/scsi/qla4xxx/ql4_def.h
+++ b/drivers/scsi/qla4xxx/ql4_def.h
@@ -244,6 +244,7 @@
 	uint8_t ip_addr[ISCSI_IPADDR_SIZE];
 	uint8_t iscsi_name[ISCSI_NAME_SIZE];	/* 72 x48 */
 	uint8_t iscsi_alias[0x20];
+	uint8_t isid[6];
 };
 
 /*
diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c
index 109c5f5..af8c323 100644
--- a/drivers/scsi/qla4xxx/ql4_init.c
+++ b/drivers/scsi/qla4xxx/ql4_init.c
@@ -342,8 +342,12 @@
 	DEBUG2(printk("scsi%ld: %s: Looking for ddb[%d]\n", ha->host_no,
 		      __func__, fw_ddb_index));
 	list_for_each_entry(ddb_entry, &ha->ddb_list, list) {
-		if (memcmp(ddb_entry->iscsi_name, fw_ddb_entry->iscsi_name,
-			   ISCSI_NAME_SIZE) == 0) {
+		if ((memcmp(ddb_entry->iscsi_name, fw_ddb_entry->iscsi_name,
+			   ISCSI_NAME_SIZE) == 0) &&
+			(ddb_entry->tpgt ==
+				le32_to_cpu(fw_ddb_entry->tgt_portal_grp)) &&
+			(memcmp(ddb_entry->isid, fw_ddb_entry->isid,
+				sizeof(ddb_entry->isid)) == 0)) {
 			found++;
 			break;
 		}
@@ -430,6 +434,8 @@
 
 	ddb_entry->port = le16_to_cpu(fw_ddb_entry->port);
 	ddb_entry->tpgt = le32_to_cpu(fw_ddb_entry->tgt_portal_grp);
+	memcpy(ddb_entry->isid, fw_ddb_entry->isid, sizeof(ddb_entry->isid));
+
 	memcpy(&ddb_entry->iscsi_name[0], &fw_ddb_entry->iscsi_name[0],
 	       min(sizeof(ddb_entry->iscsi_name),
 		   sizeof(fw_ddb_entry->iscsi_name)));
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 42e72a2..cbcd3f6 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -1095,7 +1095,8 @@
  * Description: Looks up the scsi_device with the specified @lun for a given
  * @starget.  The returned scsi_device does not have an additional
  * reference.  You must hold the host's host_lock over this call and
- * any access to the returned scsi_device.
+ * any access to the returned scsi_device. A scsi_device in state
+ * SDEV_DEL is skipped.
  *
  * Note:  The only reason why drivers should use this is because
  * they need to access the device list in irq context.  Otherwise you
@@ -1107,6 +1108,8 @@
 	struct scsi_device *sdev;
 
 	list_for_each_entry(sdev, &starget->devices, same_target_siblings) {
+		if (sdev->sdev_state == SDEV_DEL)
+			continue;
 		if (sdev->lun ==lun)
 			return sdev;
 	}
diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c
index 4969e4e..099b545 100644
--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -224,6 +224,7 @@
 	{"SGI", "TP9100", "*", BLIST_REPORTLUN2},
 	{"SGI", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},
 	{"IBM", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},
+	{"SUN", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},
 	{"SMSC", "USB 2 HS-CF", NULL, BLIST_SPARSELUN | BLIST_INQUIRY_36},
 	{"SONY", "CD-ROM CDU-8001", NULL, BLIST_BORKEN},
 	{"SONY", "TSL", NULL, BLIST_FORCELUN},		/* DDS3 & DDS4 autoloaders */
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 1889a63..0d934bf 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2839,6 +2839,8 @@
 	p->flags        = port->flags;
 	p->mapbase      = port->mapbase;
 	p->private_data = port->private_data;
+	p->type		= port->type;
+	p->line		= port->line;
 
 	set_io_from_upio(p);
 	if (port->serial_in)
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index c088146..536d8e5 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -602,6 +602,10 @@
 	/* subdevice 0x00PS means <P> parallel, <S> serial */
 	unsigned int num_serial = dev->subsystem_device & 0xf;
 
+	if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
+			dev->subsystem_device == 0x0299)
+		return 0;
+
 	if (num_serial == 0)
 		return -ENODEV;
 	return num_serial;
@@ -802,6 +806,8 @@
 #define PCI_SUBDEVICE_ID_OCTPRO422	0x0208
 #define PCI_SUBDEVICE_ID_POCTAL232	0x0308
 #define PCI_SUBDEVICE_ID_POCTAL422	0x0408
+#define PCI_VENDOR_ID_ADVANTECH		0x13fe
+#define PCI_DEVICE_ID_ADVANTECH_PCI3620	0x3620
 
 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584	0x1584
@@ -2148,6 +2154,10 @@
 #endif
 
 static struct pci_device_id serial_pci_tbl[] = {
+	/* Advantech use PCI_DEVICE_ID_ADVANTECH_PCI3620 (0x3620) as 'PCI_SUBVENDOR_ID' */
+	{	PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620,
+		PCI_DEVICE_ID_ADVANTECH_PCI3620, 0x0001, 0, 0,
+		pbn_b2_8_921600 },
 	{	PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
 		PCI_SUBVENDOR_ID_CONNECT_TECH,
 		PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
@@ -3096,6 +3106,10 @@
 		0,
 		pbn_b0_8_115200 },
 
+	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
+		PCI_VENDOR_ID_IBM, 0x0299,
+		0, 0, pbn_b0_bt_2_115200 },
+
 	/*
 	 * These entries match devices with class COMMUNICATION_SERIAL,
 	 * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c
index fde7f9c..bbcfc26 100644
--- a/drivers/serial/8250_pnp.c
+++ b/drivers/serial/8250_pnp.c
@@ -270,6 +270,8 @@
 	{       "RSS0250",              0       },
 	/* SupraExpress 28.8 Data/Fax PnP modem */
 	{	"SUP1310",		0	},
+	/* SupraExpress 336i PnP Voice Modem */
+	{	"SUP1381",		0	},
 	/* SupraExpress 33.6 Data/Fax PnP modem */
 	{	"SUP1421",		0	},
 	/* SupraExpress 33.6 Data/Fax PnP modem */
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 3e525e3..7d7f576 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -982,7 +982,7 @@
 
 config SERIAL_PNX8XXX
 	bool "Enable PNX8XXX SoCs' UART Support"
-	depends on MIPS && SOC_PNX8550
+	depends on MIPS && (SOC_PNX8550 || SOC_PNX833X)
 	select SERIAL_CORE
 	help
 	  If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index d5efd6c..89362d7 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -579,7 +579,7 @@
 	/* disable PDC transmit */
 	UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
 
-	if (!uart_circ_empty(xmit)) {
+	if (!uart_circ_empty(xmit) && !uart_tx_stopped(port)) {
 		dma_sync_single_for_device(port->dev,
 					   pdc->dma_addr,
 					   pdc->dma_size,
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index 338cf8a..92187e2 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -180,7 +180,7 @@
 	return rc;
 }
 
-static void jsm_remove_one(struct pci_dev *pdev)
+static void __devexit jsm_remove_one(struct pci_dev *pdev)
 {
 	struct jsm_board *brd = pci_get_drvdata(pdev);
 	int i = 0;
diff --git a/drivers/serial/mcf.c b/drivers/serial/mcf.c
index b2001c5..56841fe 100644
--- a/drivers/serial/mcf.c
+++ b/drivers/serial/mcf.c
@@ -212,10 +212,18 @@
 {
 	unsigned long flags;
 	unsigned int baud, baudclk;
+#if defined(CONFIG_M5272)
+	unsigned int baudfr;
+#endif
 	unsigned char mr1, mr2;
 
 	baud = uart_get_baud_rate(port, termios, old, 0, 230400);
+#if defined(CONFIG_M5272)
+	baudclk = (MCF_BUSCLK / baud) / 32;
+	baudfr = (((MCF_BUSCLK / baud) + 1) / 2) % 16;
+#else
 	baudclk = ((MCF_BUSCLK / baud) + 16) / 32;
+#endif
 
 	mr1 = MCFUART_MR1_RXIRQRDY | MCFUART_MR1_RXERRCHAR;
 	mr2 = 0;
@@ -262,6 +270,9 @@
 	writeb(mr2, port->membase + MCFUART_UMR);
 	writeb((baudclk & 0xff00) >> 8, port->membase + MCFUART_UBG1);
 	writeb((baudclk & 0xff), port->membase + MCFUART_UBG2);
+#if defined(CONFIG_M5272)
+	writeb((baudfr & 0x0f), port->membase + MCFUART_UFPD);
+#endif
 	writeb(MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER,
 		port->membase + MCFUART_UCSR);
 	writeb(MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE,
diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c
index a821e3a..14f8fa9 100644
--- a/drivers/serial/of_serial.c
+++ b/drivers/serial/of_serial.c
@@ -163,6 +163,7 @@
 	{ .type = "serial", .compatible = "ns16450",  .data = (void *)PORT_16450, },
 	{ .type = "serial", .compatible = "ns16550",  .data = (void *)PORT_16550, },
 	{ .type = "serial", .compatible = "ns16750",  .data = (void *)PORT_16750, },
+	{ .type = "serial", .compatible = "ns16850",  .data = (void *)PORT_16850, },
 #ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
 	{ .type = "serial", .compatible = "ibm,qpace-nwp-serial",
 					.data = (void *)PORT_NWPSERIAL, },
diff --git a/drivers/serial/pnx8xxx_uart.c b/drivers/serial/pnx8xxx_uart.c
index 22e30d2..1bb8f1b 100644
--- a/drivers/serial/pnx8xxx_uart.c
+++ b/drivers/serial/pnx8xxx_uart.c
@@ -187,7 +187,7 @@
 	status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) |
 		 ISTAT_TO_SM(serial_in(sport, PNX8XXX_ISTAT));
 	while (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFIFO)) {
-		ch = serial_in(sport, PNX8XXX_FIFO);
+		ch = serial_in(sport, PNX8XXX_FIFO) & 0xff;
 
 		sport->port.icount.rx++;
 
@@ -198,9 +198,16 @@
 		 * out of the main execution path
 		 */
 		if (status & (FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE |
-					PNX8XXX_UART_FIFO_RXPAR) |
+					PNX8XXX_UART_FIFO_RXPAR |
+					PNX8XXX_UART_FIFO_RXBRK) |
 			      ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN))) {
-			if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR))
+			if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXBRK)) {
+				status &= ~(FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) |
+					FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR));
+				sport->port.icount.brk++;
+				if (uart_handle_break(&sport->port))
+					goto ignore_char;
+			} else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR))
 				sport->port.icount.parity++;
 			else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE))
 				sport->port.icount.frame++;
@@ -284,14 +291,8 @@
 	/* Get the interrupts */
 	status  = serial_in(sport, PNX8XXX_ISTAT) & serial_in(sport, PNX8XXX_IEN);
 
-	/* Break signal received */
-	if (status & PNX8XXX_UART_INT_BREAK) {
-		sport->port.icount.brk++;
-		uart_handle_break(&sport->port);
-	}
-
-	/* Byte received */
-	if (status & PNX8XXX_UART_INT_RX)
+	/* Byte or break signal received */
+	if (status & (PNX8XXX_UART_INT_RX | PNX8XXX_UART_INT_BREAK))
 		pnx8xxx_rx_chars(sport);
 
 	/* TX holding register empty - transmit a byte */
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index 38c600c..3599828 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -32,7 +32,9 @@
 #elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \
       defined(CONFIG_CPU_SUBTYPE_SH7721)
 # define SCSCR_INIT(port)  0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
-#define SCIF_ORER    0x0200   /* overrun error bit */
+# define PORT_PTCR	   0xA405011EUL
+# define PORT_PVCR	   0xA4050122UL
+# define SCIF_ORER	   0x0200   /* overrun error bit */
 #elif defined(CONFIG_SH_RTS7751R2D)
 # define SCSPTR1 0xFFE0001C /* 8 bit SCIF */
 # define SCSPTR2 0xFFE80020 /* 16 bit SCIF */
@@ -393,6 +395,7 @@
 SCIx_FNS(SCxTDR, 0x20,  8, 0x0c,  8)
 SCIx_FNS(SCxSR,  0x14, 16, 0x10, 16)
 SCIx_FNS(SCxRDR, 0x24,  8, 0x14,  8)
+SCIx_FNS(SCSPTR, 0,     0,    0,  0)
 SCIF_FNS(SCTDSR, 0x0c,  8)
 SCIF_FNS(SCFER,  0x10, 16)
 SCIF_FNS(SCFCR,  0x18, 16)
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 4a6fe01..83a185d 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -230,17 +230,6 @@
 #
 comment "SPI Protocol Masters"
 
-config SPI_AT25
-	tristate "SPI EEPROMs from most vendors"
-	depends on SYSFS
-	help
-	  Enable this driver to get read/write support to most SPI EEPROMs,
-	  after you configure the board init code to know about each eeprom
-	  on your target board.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called at25.
-
 config SPI_SPIDEV
 	tristate "User mode SPI device driver support"
 	depends on EXPERIMENTAL
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 5e9f521..5d04519 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -33,7 +33,6 @@
 # 	... add above this line ...
 
 # SPI protocol drivers (device/link on bus)
-obj-$(CONFIG_SPI_AT25)		+= at25.o
 obj-$(CONFIG_SPI_SPIDEV)	+= spidev.o
 obj-$(CONFIG_SPI_TLE62X0)	+= tle62x0.o
 # 	... add above this line ...
diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
index 5e39bac..56ff3e6 100644
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -670,8 +670,7 @@
 	dev_dbg(controller, "new message %p submitted for %s\n",
 			msg, spi->dev.bus_id);
 
-	if (unlikely(list_empty(&msg->transfers)
-			|| !spi->max_speed_hz))
+	if (unlikely(list_empty(&msg->transfers)))
 		return -EINVAL;
 
 	if (as->stopping)
diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c
index 68d6f4988..fe7e5f3 100644
--- a/drivers/spi/xilinx_spi.c
+++ b/drivers/spi/xilinx_spi.c
@@ -15,12 +15,15 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+
+#include <linux/of_platform.h>
+#include <linux/of_device.h>
+#include <linux/of_spi.h>
+
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
 #include <linux/io.h>
 
-#include <syslib/virtex_devices.h>
-
 #define XILINX_SPI_NAME "xilinx_spi"
 
 /* Register definitions as per "OPB Serial Peripheral Interface (SPI) (v1.00e)
@@ -144,23 +147,14 @@
 		struct spi_transfer *t)
 {
 	u8 bits_per_word;
-	u32 hz;
-	struct xilinx_spi *xspi = spi_master_get_devdata(spi->master);
 
 	bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word;
-	hz = (t) ? t->speed_hz : spi->max_speed_hz;
 	if (bits_per_word != 8) {
 		dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
 			__func__, bits_per_word);
 		return -EINVAL;
 	}
 
-	if (hz && xspi->speed_hz > hz) {
-		dev_err(&spi->dev, "%s, unsupported clock rate %uHz\n",
-			__func__, hz);
-		return -EINVAL;
-	}
-
 	return 0;
 }
 
@@ -304,32 +298,38 @@
 	return IRQ_HANDLED;
 }
 
-static int __init xilinx_spi_probe(struct platform_device *dev)
+static int __init xilinx_spi_of_probe(struct of_device *ofdev,
+					const struct of_device_id *match)
 {
-	int ret = 0;
 	struct spi_master *master;
 	struct xilinx_spi *xspi;
-	struct xspi_platform_data *pdata;
-	struct resource *r;
+	struct resource r_irq_struct;
+	struct resource r_mem_struct;
+
+	struct resource *r_irq = &r_irq_struct;
+	struct resource *r_mem = &r_mem_struct;
+	int rc = 0;
+	const u32 *prop;
+	int len;
 
 	/* Get resources(memory, IRQ) associated with the device */
-	master = spi_alloc_master(&dev->dev, sizeof(struct xilinx_spi));
+	master = spi_alloc_master(&ofdev->dev, sizeof(struct xilinx_spi));
 
 	if (master == NULL) {
 		return -ENOMEM;
 	}
 
-	platform_set_drvdata(dev, master);
-	pdata = dev->dev.platform_data;
+	dev_set_drvdata(&ofdev->dev, master);
 
-	if (pdata == NULL) {
-		ret = -ENODEV;
+	rc = of_address_to_resource(ofdev->node, 0, r_mem);
+	if (rc) {
+		dev_warn(&ofdev->dev, "invalid address\n");
 		goto put_master;
 	}
 
-	r = platform_get_resource(dev, IORESOURCE_MEM, 0);
-	if (r == NULL) {
-		ret = -ENODEV;
+	rc = of_irq_to_resource(ofdev->node, 0, r_irq);
+	if (rc == NO_IRQ) {
+		dev_warn(&ofdev->dev, "no IRQ found\n");
 		goto put_master;
 	}
 
@@ -341,47 +341,57 @@
 	xspi->bitbang.master->setup = xilinx_spi_setup;
 	init_completion(&xspi->done);
 
-	if (!request_mem_region(r->start,
-			r->end - r->start + 1, XILINX_SPI_NAME)) {
-		ret = -ENXIO;
+	xspi->irq = r_irq->start;
+
+	if (!request_mem_region(r_mem->start,
+			r_mem->end - r_mem->start + 1, XILINX_SPI_NAME)) {
+		rc = -ENXIO;
+		dev_warn(&ofdev->dev, "memory request failure\n");
 		goto put_master;
 	}
 
-	xspi->regs = ioremap(r->start, r->end - r->start + 1);
+	xspi->regs = ioremap(r_mem->start, r_mem->end - r_mem->start + 1);
 	if (xspi->regs == NULL) {
-		ret = -ENOMEM;
+		rc = -ENOMEM;
+		dev_warn(&ofdev->dev, "ioremap failure\n");
 		goto put_master;
 	}
+	xspi->irq = r_irq->start;
 
-	ret = platform_get_irq(dev, 0);
-	if (ret < 0) {
-		ret = -ENXIO;
-		goto unmap_io;
+	/* dynamic bus assignment */
+	master->bus_num = -1;
+
+	/* number of slave select bits is required */
+	prop = of_get_property(ofdev->node, "xlnx,num-ss-bits", &len);
+	if (!prop || len < sizeof(*prop)) {
+		dev_warn(&ofdev->dev, "no 'xlnx,num-ss-bits' property\n");
+		goto put_master;
 	}
-	xspi->irq = ret;
-
-	master->bus_num = pdata->bus_num;
-	master->num_chipselect = pdata->num_chipselect;
-	xspi->speed_hz = pdata->speed_hz;
+	master->num_chipselect = *prop;
 
 	/* SPI controller initializations */
 	xspi_init_hw(xspi->regs);
 
 	/* Register for SPI Interrupt */
-	ret = request_irq(xspi->irq, xilinx_spi_irq, 0, XILINX_SPI_NAME, xspi);
-	if (ret != 0)
+	rc = request_irq(xspi->irq, xilinx_spi_irq, 0, XILINX_SPI_NAME, xspi);
+	if (rc != 0) {
+		dev_warn(&ofdev->dev, "irq request failure: %d\n", xspi->irq);
 		goto unmap_io;
+	}
 
-	ret = spi_bitbang_start(&xspi->bitbang);
-	if (ret != 0) {
-		dev_err(&dev->dev, "spi_bitbang_start FAILED\n");
+	rc = spi_bitbang_start(&xspi->bitbang);
+	if (rc != 0) {
+		dev_err(&ofdev->dev, "spi_bitbang_start FAILED\n");
 		goto free_irq;
 	}
 
-	dev_info(&dev->dev, "at 0x%08X mapped to 0x%08X, irq=%d\n",
-			r->start, (u32)xspi->regs, xspi->irq);
+	dev_info(&ofdev->dev, "at 0x%08X mapped to 0x%08X, irq=%d\n",
+			(unsigned int)r_mem->start, (u32)xspi->regs, xspi->irq);
 
-	return ret;
+	/* Add any subnodes on the SPI bus */
+	of_register_spi_devices(master, ofdev->node);
+
+	return rc;
 
 free_irq:
 	free_irq(xspi->irq, xspi);
@@ -389,21 +399,21 @@
 	iounmap(xspi->regs);
 put_master:
 	spi_master_put(master);
-	return ret;
+	return rc;
 }
 
-static int __devexit xilinx_spi_remove(struct platform_device *dev)
+static int __devexit xilinx_spi_remove(struct of_device *ofdev)
 {
 	struct xilinx_spi *xspi;
 	struct spi_master *master;
 
-	master = platform_get_drvdata(dev);
+	master = platform_get_drvdata(ofdev);
 	xspi = spi_master_get_devdata(master);
 
 	spi_bitbang_stop(&xspi->bitbang);
 	free_irq(xspi->irq, xspi);
 	iounmap(xspi->regs);
-	platform_set_drvdata(dev, 0);
+	dev_set_drvdata(&ofdev->dev, 0);
 	spi_master_put(xspi->bitbang.master);
 
 	return 0;
@@ -412,27 +422,42 @@
 /* work with hotplug and coldplug */
 MODULE_ALIAS("platform:" XILINX_SPI_NAME);
 
-static struct platform_driver xilinx_spi_driver = {
-	.probe	= xilinx_spi_probe,
-	.remove	= __devexit_p(xilinx_spi_remove),
+static int __exit xilinx_spi_of_remove(struct of_device *op)
+{
+	return xilinx_spi_remove(op);
+}
+
+static struct of_device_id xilinx_spi_of_match[] = {
+	{ .compatible = "xlnx,xps-spi-2.00.a", },
+	{ .compatible = "xlnx,xps-spi-2.00.b", },
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, xilinx_spi_of_match);
+
+static struct of_platform_driver xilinx_spi_of_driver = {
+	.owner = THIS_MODULE,
+	.name = "xilinx-xps-spi",
+	.match_table = xilinx_spi_of_match,
+	.probe = xilinx_spi_of_probe,
+	.remove = __exit_p(xilinx_spi_of_remove),
 	.driver = {
-		.name = XILINX_SPI_NAME,
+		.name = "xilinx-xps-spi",
 		.owner = THIS_MODULE,
 	},
 };
 
 static int __init xilinx_spi_init(void)
 {
-	return platform_driver_register(&xilinx_spi_driver);
+	return of_register_platform_driver(&xilinx_spi_of_driver);
 }
 module_init(xilinx_spi_init);
 
 static void __exit xilinx_spi_exit(void)
 {
-	platform_driver_unregister(&xilinx_spi_driver);
+	of_unregister_platform_driver(&xilinx_spi_of_driver);
 }
 module_exit(xilinx_spi_exit);
-
 MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
 MODULE_DESCRIPTION("Xilinx SPI driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 8b7c419..8bcde8c 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -13,6 +13,7 @@
 obj-$(CONFIG_USB_ISP116X_HCD)	+= host/
 obj-$(CONFIG_USB_OHCI_HCD)	+= host/
 obj-$(CONFIG_USB_UHCI_HCD)	+= host/
+obj-$(CONFIG_USB_FHCI_HCD)	+= host/
 obj-$(CONFIG_USB_SL811_HCD)	+= host/
 obj-$(CONFIG_USB_U132_HCD)	+= host/
 obj-$(CONFIG_USB_R8A66597_HCD)	+= host/
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 00b47ea..97ba4a9 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1349,6 +1349,12 @@
 	{ USB_DEVICE(0x0e8d, 0x0003), /* FIREFLY, MediaTek Inc; andrey.arapov@gmail.com */
 	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
 	},
+	{ USB_DEVICE(0x0e8d, 0x3329), /* i-blue 747, Qstarz BT-Q1000, Holux M-241 */
+	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+	},
+	{ USB_DEVICE(0x0e8d, 0x3329), /* MediaTek Inc GPS */
+	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+	},
 	{ USB_DEVICE(0x0482, 0x0203), /* KYOCERA AH-K3001V */
 	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
 	},
@@ -1370,6 +1376,9 @@
 	{ USB_DEVICE(0x0572, 0x1321), /* Conexant USB MODEM CX93010 */
 	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
 	},
+	{ USB_DEVICE(0x0572, 0x1324), /* Conexant USB MODEM RD02-D400 */
+	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+	},
 
 	/* control interfaces with various AT-command sets */
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index b5775af..3f3ee13 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -226,6 +226,7 @@
 	{ 0x0409, 0xf0be, USBLP_QUIRK_BIDIR }, /* NEC Picty920 (HP OEM) */
 	{ 0x0409, 0xf1be, USBLP_QUIRK_BIDIR }, /* NEC Picty800 (HP OEM) */
 	{ 0x0482, 0x0010, USBLP_QUIRK_BIDIR }, /* Kyocera Mita FS 820, by zut <kernel@zut.de> */
+	{ 0x04f9, 0x000d, USBLP_QUIRK_BIDIR }, /* Brother Industries, Ltd HL-1440 Laser Printer */
 	{ 0x04b8, 0x0202, USBLP_QUIRK_BAD_CLASS }, /* Seiko Epson Receipt Printer M129C */
 	{ 0, 0 }
 };
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 26fece1..7513bb0 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -1700,7 +1700,7 @@
 	.release =	usbdev_release,
 };
 
-void usb_fs_classdev_common_remove(struct usb_device *udev)
+static void usbdev_remove(struct usb_device *udev)
 {
 	struct dev_state *ps;
 	struct siginfo sinfo;
@@ -1742,10 +1742,15 @@
 {
 	if (dev->usb_classdev)
 		device_unregister(dev->usb_classdev);
-	usb_fs_classdev_common_remove(dev);
 }
 
-static int usb_classdev_notify(struct notifier_block *self,
+#else
+#define usb_classdev_add(dev)		0
+#define usb_classdev_remove(dev)	do {} while (0)
+
+#endif
+
+static int usbdev_notify(struct notifier_block *self,
 			       unsigned long action, void *dev)
 {
 	switch (action) {
@@ -1755,15 +1760,15 @@
 		break;
 	case USB_DEVICE_REMOVE:
 		usb_classdev_remove(dev);
+		usbdev_remove(dev);
 		break;
 	}
 	return NOTIFY_OK;
 }
 
 static struct notifier_block usbdev_nb = {
-	.notifier_call = 	usb_classdev_notify,
+	.notifier_call = 	usbdev_notify,
 };
-#endif
 
 static struct cdev usb_device_cdev;
 
@@ -1798,9 +1803,8 @@
 	 * to /sys/dev
 	 */
 	usb_classdev_class->dev_kobj = NULL;
-
-	usb_register_notify(&usbdev_nb);
 #endif
+	usb_register_notify(&usbdev_nb);
 out:
 	return retval;
 
@@ -1811,8 +1815,8 @@
 
 void usb_devio_cleanup(void)
 {
-#ifdef CONFIG_USB_DEVICE_CLASS
 	usb_unregister_notify(&usbdev_nb);
+#ifdef CONFIG_USB_DEVICE_CLASS
 	class_destroy(usb_classdev_class);
 #endif
 	cdev_del(&usb_device_cdev);
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 9876055..d0a21a5 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -284,7 +284,7 @@
 	 * supports "soft" unbinding.
 	 */
 	if (!driver->soft_unbind)
-		usb_disable_interface(udev, intf);
+		usb_disable_interface(udev, intf, false);
 
 	driver->disconnect(intf);
 	usb_cancel_queued_reset(intf);
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 507741e..c54fc404 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -128,7 +128,6 @@
 	}
 
 	pci_set_master(dev);
-	device_set_wakeup_enable(&dev->dev, 1);
 
 	retval = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED);
 	if (retval != 0)
@@ -201,6 +200,7 @@
 	struct usb_hcd		*hcd = pci_get_drvdata(dev);
 	int			retval = 0;
 	int			wake, w;
+	int			has_pci_pm;
 
 	/* Root hub suspend should have stopped all downstream traffic,
 	 * and all bus master traffic.  And done so for both the interface
@@ -230,6 +230,15 @@
 
 	synchronize_irq(dev->irq);
 
+	/* Downstream ports from this root hub should already be quiesced, so
+	 * there will be no DMA activity.  Now we can shut down the upstream
+	 * link (except maybe for PME# resume signaling) and enter some PCI
+	 * low power state, if the hardware allows.
+	 */
+	pci_disable_device(dev);
+
+	pci_save_state(dev);
+
 	/* Don't fail on error to enable wakeup.  We rely on pci code
 	 * to reject requests the hardware can't implement, rather
 	 * than coding the same thing.
@@ -241,35 +250,6 @@
 		wake = w;
 	dev_dbg(&dev->dev, "wakeup: %d\n", wake);
 
-	/* Downstream ports from this root hub should already be quiesced, so
-	 * there will be no DMA activity.  Now we can shut down the upstream
-	 * link (except maybe for PME# resume signaling) and enter some PCI
-	 * low power state, if the hardware allows.
-	 */
-	pci_disable_device(dev);
- done:
-	return retval;
-}
-EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend);
-
-/**
- * usb_hcd_pci_suspend_late - suspend a PCI-based HCD after IRQs are disabled
- * @dev: USB Host Controller being suspended
- * @message: Power Management message describing this state transition
- *
- * Store this function in the HCD's struct pci_driver as .suspend_late.
- */
-int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t message)
-{
-	int			retval = 0;
-	int			has_pci_pm;
-
-	/* We might already be suspended (runtime PM -- not yet written) */
-	if (dev->current_state != PCI_D0)
-		goto done;
-
-	pci_save_state(dev);
-
 	/* Don't change state if we don't need to */
 	if (message.event == PM_EVENT_FREEZE ||
 			message.event == PM_EVENT_PRETHAW) {
@@ -315,7 +295,7 @@
  done:
 	return retval;
 }
-EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend_late);
+EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend);
 
 /**
  * usb_hcd_pci_resume_early - resume a PCI-based HCD before IRQs are enabled
@@ -325,65 +305,8 @@
  */
 int usb_hcd_pci_resume_early(struct pci_dev *dev)
 {
-	int		retval = 0;
-	pci_power_t	state = dev->current_state;
-
-#ifdef CONFIG_PPC_PMAC
-	/* Reenable ASIC clocks for USB */
-	if (machine_is(powermac)) {
-		struct device_node *of_node;
-
-		of_node = pci_device_to_OF_node(dev);
-		if (of_node)
-			pmac_call_feature(PMAC_FTR_USB_ENABLE,
-						of_node, 0, 1);
-	}
-#endif
-
-	/* NOTE:  chip docs cover clean "real suspend" cases (what Linux
-	 * calls "standby", "suspend to RAM", and so on).  There are also
-	 * dirty cases when swsusp fakes a suspend in "shutdown" mode.
-	 */
-	if (state != PCI_D0) {
-#ifdef	DEBUG
-		int	pci_pm;
-		u16	pmcr;
-
-		pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM);
-		pci_read_config_word(dev, pci_pm + PCI_PM_CTRL, &pmcr);
-		pmcr &= PCI_PM_CTRL_STATE_MASK;
-		if (pmcr) {
-			/* Clean case:  power to USB and to HC registers was
-			 * maintained; remote wakeup is easy.
-			 */
-			dev_dbg(&dev->dev, "resume from PCI D%d\n", pmcr);
-		} else {
-			/* Clean:  HC lost Vcc power, D0 uninitialized
-			 *   + Vaux may have preserved port and transceiver
-			 *     state ... for remote wakeup from D3cold
-			 *   + or not; HCD must reinit + re-enumerate
-			 *
-			 * Dirty: D0 semi-initialized cases with swsusp
-			 *   + after BIOS init
-			 *   + after Linux init (HCD statically linked)
-			 */
-			dev_dbg(&dev->dev, "resume from previous PCI D%d\n",
-					state);
-		}
-#endif
-
-		retval = pci_set_power_state(dev, PCI_D0);
-	} else {
-		/* Same basic cases: clean (powered/not), dirty */
-		dev_dbg(&dev->dev, "PCI legacy resume\n");
-	}
-
-	if (retval < 0)
-		dev_err(&dev->dev, "can't resume: %d\n", retval);
-	else
-		pci_restore_state(dev);
-
-	return retval;
+	pci_restore_state(dev);
+	return 0;
 }
 EXPORT_SYMBOL_GPL(usb_hcd_pci_resume_early);
 
@@ -398,6 +321,18 @@
 	struct usb_hcd		*hcd;
 	int			retval;
 
+#ifdef CONFIG_PPC_PMAC
+	/* Reenable ASIC clocks for USB */
+	if (machine_is(powermac)) {
+		struct device_node *of_node;
+
+		of_node = pci_device_to_OF_node(dev);
+		if (of_node)
+			pmac_call_feature(PMAC_FTR_USB_ENABLE,
+						of_node, 0, 1);
+	}
+#endif
+
 	hcd = pci_get_drvdata(dev);
 	if (hcd->state != HC_STATE_SUSPENDED) {
 		dev_dbg(hcd->self.controller,
@@ -405,6 +340,8 @@
 		return 0;
 	}
 
+	pci_enable_wake(dev, PCI_D0, false);
+
 	retval = pci_enable_device(dev);
 	if (retval < 0) {
 		dev_err(&dev->dev, "can't re-enable after resume, %d!\n",
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index 572d2cf..5b94a56 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -257,7 +257,6 @@
 
 #ifdef CONFIG_PM
 extern int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t msg);
-extern int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t msg);
 extern int usb_hcd_pci_resume_early(struct pci_dev *dev);
 extern int usb_hcd_pci_resume(struct pci_dev *dev);
 #endif /* CONFIG_PM */
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index d5d0e40..cd50d86 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1554,7 +1554,7 @@
 		 * (Includes HNP test device.)
 		 */
 		if (udev->bus->b_hnp_enable || udev->bus->is_b_host) {
-			err = usb_port_suspend(udev);
+			err = usb_port_suspend(udev, PMSG_SUSPEND);
 			if (err < 0)
 				dev_dbg(&udev->dev, "HNP fail, %d\n", err);
 		}
@@ -2382,8 +2382,8 @@
 
 void usb_ep0_reinit(struct usb_device *udev)
 {
-	usb_disable_endpoint(udev, 0 + USB_DIR_IN);
-	usb_disable_endpoint(udev, 0 + USB_DIR_OUT);
+	usb_disable_endpoint(udev, 0 + USB_DIR_IN, true);
+	usb_disable_endpoint(udev, 0 + USB_DIR_OUT, true);
 	usb_enable_endpoint(udev, &udev->ep0, true);
 }
 EXPORT_SYMBOL_GPL(usb_ep0_reinit);
diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c
index 2a129cb..dff5760 100644
--- a/drivers/usb/core/inode.c
+++ b/drivers/usb/core/inode.c
@@ -717,7 +717,6 @@
 		fs_remove_file (dev->usbfs_dentry);
 		dev->usbfs_dentry = NULL;
 	}
-	usb_fs_classdev_common_remove(dev);
 }
 
 static int usbfs_notify(struct notifier_block *self, unsigned long action, void *dev)
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index de51667..31fb204 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1039,14 +1039,15 @@
  * @dev: the device whose endpoint is being disabled
  * @epaddr: the endpoint's address.  Endpoint number for output,
  *	endpoint number + USB_DIR_IN for input
+ * @reset_hardware: flag to erase any endpoint state stored in the
+ *	controller hardware
  *
- * Deallocates hcd/hardware state for this endpoint ... and nukes all
- * pending urbs.
- *
- * If the HCD hasn't registered a disable() function, this sets the
- * endpoint's maxpacket size to 0 to prevent further submissions.
+ * Disables the endpoint for URB submission and nukes all pending URBs.
+ * If @reset_hardware is set then also deallocates hcd/hardware state
+ * for the endpoint.
  */
-void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr)
+void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr,
+		bool reset_hardware)
 {
 	unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK;
 	struct usb_host_endpoint *ep;
@@ -1056,15 +1057,18 @@
 
 	if (usb_endpoint_out(epaddr)) {
 		ep = dev->ep_out[epnum];
-		dev->ep_out[epnum] = NULL;
+		if (reset_hardware)
+			dev->ep_out[epnum] = NULL;
 	} else {
 		ep = dev->ep_in[epnum];
-		dev->ep_in[epnum] = NULL;
+		if (reset_hardware)
+			dev->ep_in[epnum] = NULL;
 	}
 	if (ep) {
 		ep->enabled = 0;
 		usb_hcd_flush_endpoint(dev, ep);
-		usb_hcd_disable_endpoint(dev, ep);
+		if (reset_hardware)
+			usb_hcd_disable_endpoint(dev, ep);
 	}
 }
 
@@ -1072,17 +1076,21 @@
  * usb_disable_interface -- Disable all endpoints for an interface
  * @dev: the device whose interface is being disabled
  * @intf: pointer to the interface descriptor
+ * @reset_hardware: flag to erase any endpoint state stored in the
+ *	controller hardware
  *
  * Disables all the endpoints for the interface's current altsetting.
  */
-void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf)
+void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf,
+		bool reset_hardware)
 {
 	struct usb_host_interface *alt = intf->cur_altsetting;
 	int i;
 
 	for (i = 0; i < alt->desc.bNumEndpoints; ++i) {
 		usb_disable_endpoint(dev,
-				alt->endpoint[i].desc.bEndpointAddress);
+				alt->endpoint[i].desc.bEndpointAddress,
+				reset_hardware);
 	}
 }
 
@@ -1103,8 +1111,8 @@
 	dev_dbg(&dev->dev, "%s nuking %s URBs\n", __func__,
 		skip_ep0 ? "non-ep0" : "all");
 	for (i = skip_ep0; i < 16; ++i) {
-		usb_disable_endpoint(dev, i);
-		usb_disable_endpoint(dev, i + USB_DIR_IN);
+		usb_disable_endpoint(dev, i, true);
+		usb_disable_endpoint(dev, i + USB_DIR_IN, true);
 	}
 	dev->toggle[0] = dev->toggle[1] = 0;
 
@@ -1274,7 +1282,7 @@
 		remove_intf_ep_devs(iface);
 		usb_remove_sysfs_intf_files(iface);
 	}
-	usb_disable_interface(dev, iface);
+	usb_disable_interface(dev, iface, true);
 
 	iface->cur_altsetting = alt;
 
@@ -1353,8 +1361,8 @@
 	 */
 
 	for (i = 1; i < 16; ++i) {
-		usb_disable_endpoint(dev, i);
-		usb_disable_endpoint(dev, i + USB_DIR_IN);
+		usb_disable_endpoint(dev, i, true);
+		usb_disable_endpoint(dev, i + USB_DIR_IN, true);
 	}
 
 	config = dev->actconfig;
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 3861778..79d8a9e 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -15,9 +15,10 @@
 		struct usb_host_endpoint *ep, bool reset_toggle);
 extern void usb_enable_interface(struct usb_device *dev,
 		struct usb_interface *intf, bool reset_toggles);
-extern void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr);
+extern void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr,
+		bool reset_hardware);
 extern void usb_disable_interface(struct usb_device *dev,
-		struct usb_interface *intf);
+		struct usb_interface *intf, bool reset_hardware);
 extern void usb_release_interface_cache(struct kref *ref);
 extern void usb_disable_device(struct usb_device *dev, int skip_ep0);
 extern int usb_deauthorize_device(struct usb_device *);
@@ -151,7 +152,6 @@
 extern const struct file_operations usbfs_devices_fops;
 extern const struct file_operations usbdev_file_operations;
 extern void usbfs_conn_disc_event(void);
-extern void usb_fs_classdev_common_remove(struct usb_device *udev);
 
 extern int usb_devio_init(void);
 extern void usb_devio_cleanup(void);
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index f2da026..5d11c29 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -683,6 +683,7 @@
 	struct usb_request		*req = cdev->req;
 	int				value = -EOPNOTSUPP;
 	u16				w_index = le16_to_cpu(ctrl->wIndex);
+	u8				intf = w_index & 0xFF;
 	u16				w_value = le16_to_cpu(ctrl->wValue);
 	u16				w_length = le16_to_cpu(ctrl->wLength);
 	struct usb_function		*f = NULL;
@@ -769,10 +770,10 @@
 			goto unknown;
 		if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES)
 			break;
-		f = cdev->config->interface[w_index];
+		f = cdev->config->interface[intf];
 		if (!f)
 			break;
-		if (w_value && !f->get_alt)
+		if (w_value && !f->set_alt)
 			break;
 		value = f->set_alt(f, w_index, w_value);
 		break;
@@ -781,7 +782,7 @@
 			goto unknown;
 		if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES)
 			break;
-		f = cdev->config->interface[w_index];
+		f = cdev->config->interface[intf];
 		if (!f)
 			break;
 		/* lots of interfaces only need altsetting zero... */
@@ -808,7 +809,7 @@
 		 */
 		if ((ctrl->bRequestType & USB_RECIP_MASK)
 				== USB_RECIP_INTERFACE) {
-			f = cdev->config->interface[w_index];
+			f = cdev->config->interface[intf];
 			if (f && f->setup)
 				value = f->setup(f, ctrl);
 			else
diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c
index cde8fdf..77c5d0a 100644
--- a/drivers/usb/gadget/imx_udc.c
+++ b/drivers/usb/gadget/imx_udc.c
@@ -297,7 +297,7 @@
 
 		for (i = 0; i < 100; i ++) {
 			temp = __raw_readl(imx_usb->base + USB_EP_STAT(EP_NO(imx_ep)));
-	 		if (!temp & EPSTAT_STALL)
+			if (!(temp & EPSTAT_STALL))
 	 			break;
 	 		udelay(20);
 	 	}
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 2b476b6..2c63bfb 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -140,6 +140,7 @@
 	tristate "OHCI HCD support"
 	depends on USB && USB_ARCH_HAS_OHCI
 	select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
+	select USB_OTG_UTILS if ARCH_OMAP
 	---help---
 	  The Open Host Controller Interface (OHCI) is a standard for accessing
 	  USB 1.1 host controller hardware.  It does more in hardware than Intel's
@@ -238,6 +239,23 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called uhci-hcd.
 
+config USB_FHCI_HCD
+	tristate "Freescale QE USB Host Controller support"
+	depends on USB && OF_GPIO && QE_GPIO && QUICC_ENGINE
+	select FSL_GTM
+	select QE_USB
+	help
+	  This driver enables support for Freescale QE USB Host Controller
+	  (as found on MPC8360 and MPC8323 processors), the driver supports
+	  Full and Low Speed USB.
+
+config FHCI_DEBUG
+	bool "Freescale QE USB Host Controller debug support"
+	depends on USB_FHCI_HCD && DEBUG_FS
+	help
+	  Say "y" to see some FHCI debug information and statistics
+	  throught debugfs.
+
 config USB_U132_HCD
 	tristate "Elan U132 Adapter Host Controller"
 	depends on USB && USB_FTDI_ELAN
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index e5f3f20..f163571 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -7,6 +7,11 @@
 endif
 
 isp1760-objs := isp1760-hcd.o isp1760-if.o
+fhci-objs := fhci-hcd.o fhci-hub.o fhci-q.o fhci-mem.o \
+	     fhci-tds.o fhci-sched.o
+ifeq ($(CONFIG_FHCI_DEBUG),y)
+fhci-objs += fhci-dbg.o
+endif
 
 obj-$(CONFIG_USB_WHCI_HCD)	+= whci/
 
@@ -17,6 +22,7 @@
 obj-$(CONFIG_USB_ISP116X_HCD)	+= isp116x-hcd.o
 obj-$(CONFIG_USB_OHCI_HCD)	+= ohci-hcd.o
 obj-$(CONFIG_USB_UHCI_HCD)	+= uhci-hcd.o
+obj-$(CONFIG_USB_FHCI_HCD)	+= fhci.o
 obj-$(CONFIG_USB_SL811_HCD)	+= sl811-hcd.o
 obj-$(CONFIG_USB_SL811_CS)	+= sl811_cs.o
 obj-$(CONFIG_USB_U132_HCD)	+= u132-hcd.o
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index bdc6e86..bb21fb0 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -230,7 +230,7 @@
 		pci_read_config_word(pdev, 0x62, &port_wake);
 		if (port_wake & 0x0001) {
 			dev_warn(&pdev->dev, "Enabling legacy PCI PM\n");
-			device_init_wakeup(&pdev->dev, 1);
+			device_set_wakeup_capable(&pdev->dev, 1);
 		}
 	}
 
@@ -432,7 +432,6 @@
 
 #ifdef	CONFIG_PM
 	.suspend =	usb_hcd_pci_suspend,
-	.suspend_late =	usb_hcd_pci_suspend_late,
 	.resume_early =	usb_hcd_pci_resume_early,
 	.resume =	usb_hcd_pci_resume,
 #endif
diff --git a/drivers/usb/host/fhci-dbg.c b/drivers/usb/host/fhci-dbg.c
new file mode 100644
index 0000000..34e14ed
--- /dev/null
+++ b/drivers/usb/host/fhci-dbg.c
@@ -0,0 +1,139 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/usb.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er)
+{
+	int i;
+
+	if (usb_er == -1) {
+		fhci->usb_irq_stat[12]++;
+		return;
+	}
+
+	for (i = 0; i < 12; ++i) {
+		if (usb_er & (1 << i))
+			fhci->usb_irq_stat[i]++;
+	}
+}
+
+static int fhci_dfs_regs_show(struct seq_file *s, void *v)
+{
+	struct fhci_hcd *fhci = s->private;
+	struct fhci_regs __iomem *regs = fhci->regs;
+
+	seq_printf(s,
+		"mode: 0x%x\n" "addr: 0x%x\n"
+		"command: 0x%x\n" "ep0: 0x%x\n"
+		"event: 0x%x\n" "mask: 0x%x\n"
+		"status: 0x%x\n" "SOF timer: %d\n"
+		"frame number: %d\n"
+		"lines status: 0x%x\n",
+		in_8(&regs->usb_mod), in_8(&regs->usb_addr),
+		in_8(&regs->usb_comm), in_be16(&regs->usb_ep[0]),
+		in_be16(&regs->usb_event), in_be16(&regs->usb_mask),
+		in_8(&regs->usb_status), in_be16(&regs->usb_sof_tmr),
+		in_be16(&regs->usb_frame_num),
+		fhci_ioports_check_bus_state(fhci));
+
+	return 0;
+}
+
+static int fhci_dfs_irq_stat_show(struct seq_file *s, void *v)
+{
+	struct fhci_hcd *fhci = s->private;
+	int *usb_irq_stat = fhci->usb_irq_stat;
+
+	seq_printf(s,
+		"RXB: %d\n" "TXB: %d\n" "BSY: %d\n"
+		"SOF: %d\n" "TXE0: %d\n" "TXE1: %d\n"
+		"TXE2: %d\n" "TXE3: %d\n" "IDLE: %d\n"
+		"RESET: %d\n" "SFT: %d\n" "MSF: %d\n"
+		"IDLE_ONLY: %d\n",
+		usb_irq_stat[0], usb_irq_stat[1], usb_irq_stat[2],
+		usb_irq_stat[3], usb_irq_stat[4], usb_irq_stat[5],
+		usb_irq_stat[6], usb_irq_stat[7], usb_irq_stat[8],
+		usb_irq_stat[9], usb_irq_stat[10], usb_irq_stat[11],
+		usb_irq_stat[12]);
+
+	return 0;
+}
+
+static int fhci_dfs_regs_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, fhci_dfs_regs_show, inode->i_private);
+}
+
+static int fhci_dfs_irq_stat_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, fhci_dfs_irq_stat_show, inode->i_private);
+}
+
+static const struct file_operations fhci_dfs_regs_fops = {
+	.open = fhci_dfs_regs_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static const struct file_operations fhci_dfs_irq_stat_fops = {
+	.open = fhci_dfs_irq_stat_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+void fhci_dfs_create(struct fhci_hcd *fhci)
+{
+	struct device *dev = fhci_to_hcd(fhci)->self.controller;
+
+	fhci->dfs_root = debugfs_create_dir(dev->bus_id, NULL);
+	if (!fhci->dfs_root) {
+		WARN_ON(1);
+		return;
+	}
+
+	fhci->dfs_regs = debugfs_create_file("regs", S_IFREG | S_IRUGO,
+		fhci->dfs_root, fhci, &fhci_dfs_regs_fops);
+
+	fhci->dfs_irq_stat = debugfs_create_file("irq_stat",
+		S_IFREG | S_IRUGO, fhci->dfs_root, fhci,
+		&fhci_dfs_irq_stat_fops);
+
+	WARN_ON(!fhci->dfs_regs || !fhci->dfs_irq_stat);
+}
+
+void fhci_dfs_destroy(struct fhci_hcd *fhci)
+{
+	if (!fhci->dfs_root)
+		return;
+
+	if (fhci->dfs_irq_stat)
+		debugfs_remove(fhci->dfs_irq_stat);
+
+	if (fhci->dfs_regs)
+		debugfs_remove(fhci->dfs_regs);
+
+	debugfs_remove(fhci->dfs_root);
+}
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
new file mode 100644
index 0000000..ba622cc
--- /dev/null
+++ b/drivers/usb/host/fhci-hcd.c
@@ -0,0 +1,836 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/usb.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
+#include <asm/qe.h>
+#include <asm/fsl_gtm.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+void fhci_start_sof_timer(struct fhci_hcd *fhci)
+{
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	/* clear frame_n */
+	out_be16(&fhci->pram->frame_num, 0);
+
+	out_be16(&fhci->regs->usb_sof_tmr, 0);
+	setbits8(&fhci->regs->usb_mod, USB_MODE_SFTE);
+
+	fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+void fhci_stop_sof_timer(struct fhci_hcd *fhci)
+{
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	clrbits8(&fhci->regs->usb_mod, USB_MODE_SFTE);
+	gtm_stop_timer16(fhci->timer);
+
+	fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+u16 fhci_get_sof_timer_count(struct fhci_usb *usb)
+{
+	return be16_to_cpu(in_be16(&usb->fhci->regs->usb_sof_tmr) / 12);
+}
+
+/* initialize the endpoint zero */
+static u32 endpoint_zero_init(struct fhci_usb *usb,
+			      enum fhci_mem_alloc data_mem,
+			      u32 ring_len)
+{
+	u32 rc;
+
+	rc = fhci_create_ep(usb, data_mem, ring_len);
+	if (rc)
+		return rc;
+
+	/* inilialize endpoint registers */
+	fhci_init_ep_registers(usb, usb->ep0, data_mem);
+
+	return 0;
+}
+
+/* enable the USB interrupts */
+void fhci_usb_enable_interrupt(struct fhci_usb *usb)
+{
+	struct fhci_hcd *fhci = usb->fhci;
+
+	if (usb->intr_nesting_cnt == 1) {
+		/* initialize the USB interrupt */
+		enable_irq(fhci_to_hcd(fhci)->irq);
+
+		/* initialize the event register and mask register */
+		out_be16(&usb->fhci->regs->usb_event, 0xffff);
+		out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk);
+
+		/* enable the timer interrupts */
+		enable_irq(fhci->timer->irq);
+	} else if (usb->intr_nesting_cnt > 1)
+		fhci_info(fhci, "unbalanced USB interrupts nesting\n");
+	usb->intr_nesting_cnt--;
+}
+
+/* diable the usb interrupt */
+void fhci_usb_disable_interrupt(struct fhci_usb *usb)
+{
+	struct fhci_hcd *fhci = usb->fhci;
+
+	if (usb->intr_nesting_cnt == 0) {
+		/* diable the timer interrupt */
+		disable_irq_nosync(fhci->timer->irq);
+
+		/* disable the usb interrupt */
+		disable_irq_nosync(fhci_to_hcd(fhci)->irq);
+		out_be16(&usb->fhci->regs->usb_mask, 0);
+	}
+	usb->intr_nesting_cnt++;
+}
+
+/* enable the USB controller */
+static u32 fhci_usb_enable(struct fhci_hcd *fhci)
+{
+	struct fhci_usb *usb = fhci->usb_lld;
+
+	out_be16(&usb->fhci->regs->usb_event, 0xffff);
+	out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk);
+	setbits8(&usb->fhci->regs->usb_mod, USB_MODE_EN);
+
+	mdelay(100);
+
+	return 0;
+}
+
+/* disable the USB controller */
+static u32 fhci_usb_disable(struct fhci_hcd *fhci)
+{
+	struct fhci_usb *usb = fhci->usb_lld;
+
+	fhci_usb_disable_interrupt(usb);
+	fhci_port_disable(fhci);
+
+	/* disable the usb controller */
+	if (usb->port_status == FHCI_PORT_FULL ||
+			usb->port_status == FHCI_PORT_LOW)
+		fhci_device_disconnected_interrupt(fhci);
+
+	clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_EN);
+
+	return 0;
+}
+
+/* check the bus state by polling the QE bit on the IO ports */
+int fhci_ioports_check_bus_state(struct fhci_hcd *fhci)
+{
+	u8 bits = 0;
+
+	/* check USBOE,if transmitting,exit */
+	if (!gpio_get_value(fhci->gpios[GPIO_USBOE]))
+		return -1;
+
+	/* check USBRP */
+	if (gpio_get_value(fhci->gpios[GPIO_USBRP]))
+		bits |= 0x2;
+
+	/* check USBRN */
+	if (gpio_get_value(fhci->gpios[GPIO_USBRN]))
+		bits |= 0x1;
+
+	return bits;
+}
+
+static void fhci_mem_free(struct fhci_hcd *fhci)
+{
+	struct ed *ed;
+	struct ed *next_ed;
+	struct td *td;
+	struct td *next_td;
+
+	list_for_each_entry_safe(ed, next_ed, &fhci->empty_eds, node) {
+		list_del(&ed->node);
+		kfree(ed);
+	}
+
+	list_for_each_entry_safe(td, next_td, &fhci->empty_tds, node) {
+		list_del(&td->node);
+		kfree(td);
+	}
+
+	kfree(fhci->vroot_hub);
+	fhci->vroot_hub = NULL;
+
+	kfree(fhci->hc_list);
+	fhci->hc_list = NULL;
+}
+
+static int fhci_mem_init(struct fhci_hcd *fhci)
+{
+	int i;
+
+	fhci->hc_list = kzalloc(sizeof(*fhci->hc_list), GFP_KERNEL);
+	if (!fhci->hc_list)
+		goto err;
+
+	INIT_LIST_HEAD(&fhci->hc_list->ctrl_list);
+	INIT_LIST_HEAD(&fhci->hc_list->bulk_list);
+	INIT_LIST_HEAD(&fhci->hc_list->iso_list);
+	INIT_LIST_HEAD(&fhci->hc_list->intr_list);
+	INIT_LIST_HEAD(&fhci->hc_list->done_list);
+
+	fhci->vroot_hub = kzalloc(sizeof(*fhci->vroot_hub), GFP_KERNEL);
+	if (!fhci->vroot_hub)
+		goto err;
+
+	INIT_LIST_HEAD(&fhci->empty_eds);
+	INIT_LIST_HEAD(&fhci->empty_tds);
+
+	/* initialize work queue to handle done list */
+	fhci_tasklet.data = (unsigned long)fhci;
+	fhci->process_done_task = &fhci_tasklet;
+
+	for (i = 0; i < MAX_TDS; i++) {
+		struct td *td;
+
+		td = kmalloc(sizeof(*td), GFP_KERNEL);
+		if (!td)
+			goto err;
+		fhci_recycle_empty_td(fhci, td);
+	}
+	for (i = 0; i < MAX_EDS; i++) {
+		struct ed *ed;
+
+		ed = kmalloc(sizeof(*ed), GFP_KERNEL);
+		if (!ed)
+			goto err;
+		fhci_recycle_empty_ed(fhci, ed);
+	}
+
+	fhci->active_urbs = 0;
+	return 0;
+err:
+	fhci_mem_free(fhci);
+	return -ENOMEM;
+}
+
+/* destroy the fhci_usb structure */
+static void fhci_usb_free(void *lld)
+{
+	struct fhci_usb *usb = lld;
+	struct fhci_hcd *fhci = usb->fhci;
+
+	if (usb) {
+		fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF);
+		fhci_ep0_free(usb);
+		kfree(usb->actual_frame);
+		kfree(usb);
+	}
+}
+
+/* initialize the USB */
+static int fhci_usb_init(struct fhci_hcd *fhci)
+{
+	struct fhci_usb *usb = fhci->usb_lld;
+
+	memset_io(usb->fhci->pram, 0, FHCI_PRAM_SIZE);
+
+	usb->port_status = FHCI_PORT_DISABLED;
+	usb->max_frame_usage = FRAME_TIME_USAGE;
+	usb->sw_transaction_time = SW_FIX_TIME_BETWEEN_TRANSACTION;
+
+	usb->actual_frame = kzalloc(sizeof(*usb->actual_frame), GFP_KERNEL);
+	if (!usb->actual_frame) {
+		fhci_usb_free(usb);
+		return -ENOMEM;
+	}
+
+	INIT_LIST_HEAD(&usb->actual_frame->tds_list);
+
+	/* initializing registers on chip, clear frame number */
+	out_be16(&fhci->pram->frame_num, 0);
+
+	/* clear rx state */
+	out_be32(&fhci->pram->rx_state, 0);
+
+	/* set mask register */
+	usb->saved_msk = (USB_E_TXB_MASK |
+			  USB_E_TXE1_MASK |
+			  USB_E_IDLE_MASK |
+			  USB_E_RESET_MASK | USB_E_SFT_MASK | USB_E_MSF_MASK);
+
+	out_8(&usb->fhci->regs->usb_mod, USB_MODE_HOST | USB_MODE_EN);
+
+	/* clearing the mask register */
+	out_be16(&usb->fhci->regs->usb_mask, 0);
+
+	/* initialing the event register */
+	out_be16(&usb->fhci->regs->usb_event, 0xffff);
+
+	if (endpoint_zero_init(usb, DEFAULT_DATA_MEM, DEFAULT_RING_LEN) != 0) {
+		fhci_usb_free(usb);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* initialize the fhci_usb struct and the corresponding data staruct */
+static struct fhci_usb *fhci_create_lld(struct fhci_hcd *fhci)
+{
+	struct fhci_usb *usb;
+
+	/* allocate memory for SCC data structure */
+	usb = kzalloc(sizeof(*usb), GFP_KERNEL);
+	if (!usb) {
+		fhci_err(fhci, "no memory for SCC data struct\n");
+		return NULL;
+	}
+
+	usb->fhci = fhci;
+	usb->hc_list = fhci->hc_list;
+	usb->vroot_hub = fhci->vroot_hub;
+
+	usb->transfer_confirm = fhci_transfer_confirm_callback;
+
+	return usb;
+}
+
+static int fhci_start(struct usb_hcd *hcd)
+{
+	int ret;
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+
+	ret = fhci_mem_init(fhci);
+	if (ret) {
+		fhci_err(fhci, "failed to allocate memory\n");
+		goto err;
+	}
+
+	fhci->usb_lld = fhci_create_lld(fhci);
+	if (!fhci->usb_lld) {
+		fhci_err(fhci, "low level driver config failed\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	ret = fhci_usb_init(fhci);
+	if (ret) {
+		fhci_err(fhci, "low level driver initialize failed\n");
+		goto err;
+	}
+
+	spin_lock_init(&fhci->lock);
+
+	/* connect the virtual root hub */
+	fhci->vroot_hub->dev_num = 1;	/* this field may be needed to fix */
+	fhci->vroot_hub->hub.wHubStatus = 0;
+	fhci->vroot_hub->hub.wHubChange = 0;
+	fhci->vroot_hub->port.wPortStatus = 0;
+	fhci->vroot_hub->port.wPortChange = 0;
+
+	hcd->state = HC_STATE_RUNNING;
+
+	/*
+	 * From here on, khubd concurrently accesses the root
+	 * hub; drivers will be talking to enumerated devices.
+	 * (On restart paths, khubd already knows about the root
+	 * hub and could find work as soon as we wrote FLAG_CF.)
+	 *
+	 * Before this point the HC was idle/ready.  After, khubd
+	 * and device drivers may start it running.
+	 */
+	fhci_usb_enable(fhci);
+	return 0;
+err:
+	fhci_mem_free(fhci);
+	return ret;
+}
+
+static void fhci_stop(struct usb_hcd *hcd)
+{
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+
+	fhci_usb_disable_interrupt(fhci->usb_lld);
+	fhci_usb_disable(fhci);
+
+	fhci_usb_free(fhci->usb_lld);
+	fhci->usb_lld = NULL;
+	fhci_mem_free(fhci);
+}
+
+static int fhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
+			    gfp_t mem_flags)
+{
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+	u32 pipe = urb->pipe;
+	int ret;
+	int i;
+	int size = 0;
+	struct urb_priv *urb_priv;
+	unsigned long flags;
+
+	switch (usb_pipetype(pipe)) {
+	case PIPE_CONTROL:
+		/* 1 td fro setup,1 for ack */
+		size = 2;
+	case PIPE_BULK:
+		/* one td for every 4096 bytes(can be upto 8k) */
+		size += urb->transfer_buffer_length / 4096;
+		/* ...add for any remaining bytes... */
+		if ((urb->transfer_buffer_length % 4096) != 0)
+			size++;
+		/* ..and maybe a zero length packet to wrap it up */
+		if (size == 0)
+			size++;
+		else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0
+			 && (urb->transfer_buffer_length
+			     % usb_maxpacket(urb->dev, pipe,
+					     usb_pipeout(pipe))) != 0)
+			size++;
+		break;
+	case PIPE_ISOCHRONOUS:
+		size = urb->number_of_packets;
+		if (size <= 0)
+			return -EINVAL;
+		for (i = 0; i < urb->number_of_packets; i++) {
+			urb->iso_frame_desc[i].actual_length = 0;
+			urb->iso_frame_desc[i].status = (u32) (-EXDEV);
+		}
+		break;
+	case PIPE_INTERRUPT:
+		size = 1;
+	}
+
+	/* allocate the private part of the URB */
+	urb_priv = kzalloc(sizeof(*urb_priv), mem_flags);
+	if (!urb_priv)
+		return -ENOMEM;
+
+	/* allocate the private part of the URB */
+	urb_priv->tds = kzalloc(size * sizeof(struct td), mem_flags);
+	if (!urb_priv->tds) {
+		kfree(urb_priv);
+		return -ENOMEM;
+	}
+
+	spin_lock_irqsave(&fhci->lock, flags);
+
+	ret = usb_hcd_link_urb_to_ep(hcd, urb);
+	if (ret)
+		goto err;
+
+	/* fill the private part of the URB */
+	urb_priv->num_of_tds = size;
+
+	urb->status = -EINPROGRESS;
+	urb->actual_length = 0;
+	urb->error_count = 0;
+	urb->hcpriv = urb_priv;
+
+	fhci_queue_urb(fhci, urb);
+err:
+	if (ret) {
+		kfree(urb_priv->tds);
+		kfree(urb_priv);
+	}
+	spin_unlock_irqrestore(&fhci->lock, flags);
+	return ret;
+}
+
+/* dequeue FHCI URB */
+static int fhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+	struct fhci_usb *usb = fhci->usb_lld;
+	int ret = -EINVAL;
+	unsigned long flags;
+
+	if (!urb || !urb->dev || !urb->dev->bus)
+		goto out;
+
+	spin_lock_irqsave(&fhci->lock, flags);
+
+	ret = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (ret)
+		goto out2;
+
+	if (usb->port_status != FHCI_PORT_DISABLED) {
+		struct urb_priv *urb_priv;
+
+		/*
+		 * flag the urb's data for deletion in some upcoming
+		 * SF interrupt's delete list processing
+		 */
+		urb_priv = urb->hcpriv;
+
+		if (!urb_priv || (urb_priv->state == URB_DEL))
+			goto out2;
+
+		urb_priv->state = URB_DEL;
+
+		/* already pending? */
+		urb_priv->ed->state = FHCI_ED_URB_DEL;
+	} else {
+		fhci_urb_complete_free(fhci, urb);
+	}
+
+out2:
+	spin_unlock_irqrestore(&fhci->lock, flags);
+out:
+	return ret;
+}
+
+static void fhci_endpoint_disable(struct usb_hcd *hcd,
+				  struct usb_host_endpoint *ep)
+{
+	struct fhci_hcd *fhci;
+	struct ed *ed;
+	unsigned long flags;
+
+	fhci = hcd_to_fhci(hcd);
+	spin_lock_irqsave(&fhci->lock, flags);
+	ed = ep->hcpriv;
+	if (ed) {
+		while (ed->td_head != NULL) {
+			struct td *td = fhci_remove_td_from_ed(ed);
+			fhci_urb_complete_free(fhci, td->urb);
+		}
+		fhci_recycle_empty_ed(fhci, ed);
+		ep->hcpriv = NULL;
+	}
+	spin_unlock_irqrestore(&fhci->lock, flags);
+}
+
+static int fhci_get_frame_number(struct usb_hcd *hcd)
+{
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+
+	return get_frame_num(fhci);
+}
+
+static const struct hc_driver fhci_driver = {
+	.description = "fsl,usb-fhci",
+	.product_desc = "FHCI HOST Controller",
+	.hcd_priv_size = sizeof(struct fhci_hcd),
+
+	/* generic hardware linkage */
+	.irq = fhci_irq,
+	.flags = HCD_USB11 | HCD_MEMORY,
+
+	/* basic lifecycle operation */
+	.start = fhci_start,
+	.stop = fhci_stop,
+
+	/* managing i/o requests and associated device resources */
+	.urb_enqueue = fhci_urb_enqueue,
+	.urb_dequeue = fhci_urb_dequeue,
+	.endpoint_disable = fhci_endpoint_disable,
+
+	/* scheduling support */
+	.get_frame_number = fhci_get_frame_number,
+
+	/* root hub support */
+	.hub_status_data = fhci_hub_status_data,
+	.hub_control = fhci_hub_control,
+};
+
+static int __devinit of_fhci_probe(struct of_device *ofdev,
+				   const struct of_device_id *ofid)
+{
+	struct device *dev = &ofdev->dev;
+	struct device_node *node = ofdev->node;
+	struct usb_hcd *hcd;
+	struct fhci_hcd *fhci;
+	struct resource usb_regs;
+	unsigned long pram_addr;
+	unsigned int usb_irq;
+	const char *sprop;
+	const u32 *iprop;
+	int size;
+	int ret;
+	int i;
+	int j;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	sprop = of_get_property(node, "mode", NULL);
+	if (sprop && strcmp(sprop, "host"))
+		return -ENODEV;
+
+	hcd = usb_create_hcd(&fhci_driver, dev, dev->bus_id);
+	if (!hcd) {
+		dev_err(dev, "could not create hcd\n");
+		return -ENOMEM;
+	}
+
+	fhci = hcd_to_fhci(hcd);
+	hcd->self.controller = dev;
+	dev_set_drvdata(dev, hcd);
+
+	iprop = of_get_property(node, "hub-power-budget", &size);
+	if (iprop && size == sizeof(*iprop))
+		hcd->power_budget = *iprop;
+
+	/* FHCI registers. */
+	ret = of_address_to_resource(node, 0, &usb_regs);
+	if (ret) {
+		dev_err(dev, "could not get regs\n");
+		goto err_regs;
+	}
+
+	hcd->regs = ioremap(usb_regs.start, usb_regs.end - usb_regs.start + 1);
+	if (!hcd->regs) {
+		dev_err(dev, "could not ioremap regs\n");
+		ret = -ENOMEM;
+		goto err_regs;
+	}
+	fhci->regs = hcd->regs;
+
+	/* Parameter RAM. */
+	iprop = of_get_property(node, "reg", &size);
+	if (!iprop || size < sizeof(*iprop) * 4) {
+		dev_err(dev, "can't get pram offset\n");
+		ret = -EINVAL;
+		goto err_pram;
+	}
+
+	pram_addr = cpm_muram_alloc_fixed(iprop[2], FHCI_PRAM_SIZE);
+	if (IS_ERR_VALUE(pram_addr)) {
+		dev_err(dev, "failed to allocate usb pram\n");
+		ret = -ENOMEM;
+		goto err_pram;
+	}
+	fhci->pram = cpm_muram_addr(pram_addr);
+
+	/* GPIOs and pins */
+	for (i = 0; i < NUM_GPIOS; i++) {
+		int gpio;
+		enum of_gpio_flags flags;
+
+		gpio = of_get_gpio_flags(node, i, &flags);
+		fhci->gpios[i] = gpio;
+		fhci->alow_gpios[i] = flags & OF_GPIO_ACTIVE_LOW;
+
+		if (!gpio_is_valid(gpio)) {
+			if (i < GPIO_SPEED) {
+				dev_err(dev, "incorrect GPIO%d: %d\n",
+					i, gpio);
+				goto err_gpios;
+			} else {
+				dev_info(dev, "assuming board doesn't have "
+					"%s gpio\n", i == GPIO_SPEED ?
+					"speed" : "power");
+				continue;
+			}
+		}
+
+		ret = gpio_request(gpio, dev->bus_id);
+		if (ret) {
+			dev_err(dev, "failed to request gpio %d", i);
+			goto err_gpios;
+		}
+
+		if (i >= GPIO_SPEED) {
+			ret = gpio_direction_output(gpio, 0);
+			if (ret) {
+				dev_err(dev, "failed to set gpio %d as "
+					"an output\n", i);
+				i++;
+				goto err_gpios;
+			}
+		}
+	}
+
+	for (j = 0; j < NUM_PINS; j++) {
+		fhci->pins[j] = qe_pin_request(ofdev->node, j);
+		if (IS_ERR(fhci->pins[j])) {
+			ret = PTR_ERR(fhci->pins[j]);
+			dev_err(dev, "can't get pin %d: %d\n", j, ret);
+			goto err_pins;
+		}
+	}
+
+	/* Frame limit timer and its interrupt. */
+	fhci->timer = gtm_get_timer16();
+	if (IS_ERR(fhci->timer)) {
+		ret = PTR_ERR(fhci->timer);
+		dev_err(dev, "failed to request qe timer: %i", ret);
+		goto err_get_timer;
+	}
+
+	ret = request_irq(fhci->timer->irq, fhci_frame_limit_timer_irq,
+			  IRQF_DISABLED, "qe timer (usb)", hcd);
+	if (ret) {
+		dev_err(dev, "failed to request timer irq");
+		goto err_timer_irq;
+	}
+
+	/* USB Host interrupt. */
+	usb_irq = irq_of_parse_and_map(node, 0);
+	if (usb_irq == NO_IRQ) {
+		dev_err(dev, "could not get usb irq\n");
+		ret = -EINVAL;
+		goto err_usb_irq;
+	}
+
+	/* Clocks. */
+	sprop = of_get_property(node, "fsl,fullspeed-clock", NULL);
+	if (sprop) {
+		fhci->fullspeed_clk = qe_clock_source(sprop);
+		if (fhci->fullspeed_clk == QE_CLK_DUMMY) {
+			dev_err(dev, "wrong fullspeed-clock\n");
+			ret = -EINVAL;
+			goto err_clocks;
+		}
+	}
+
+	sprop = of_get_property(node, "fsl,lowspeed-clock", NULL);
+	if (sprop) {
+		fhci->lowspeed_clk = qe_clock_source(sprop);
+		if (fhci->lowspeed_clk == QE_CLK_DUMMY) {
+			dev_err(dev, "wrong lowspeed-clock\n");
+			ret = -EINVAL;
+			goto err_clocks;
+		}
+	}
+
+	if (fhci->fullspeed_clk == QE_CLK_NONE &&
+			fhci->lowspeed_clk == QE_CLK_NONE) {
+		dev_err(dev, "no clocks specified\n");
+		ret = -EINVAL;
+		goto err_clocks;
+	}
+
+	dev_info(dev, "at 0x%p, irq %d\n", hcd->regs, usb_irq);
+
+	fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF);
+
+	/* Start with full-speed, if possible. */
+	if (fhci->fullspeed_clk != QE_CLK_NONE) {
+		fhci_config_transceiver(fhci, FHCI_PORT_FULL);
+		qe_usb_clock_set(fhci->fullspeed_clk, USB_CLOCK);
+	} else {
+		fhci_config_transceiver(fhci, FHCI_PORT_LOW);
+		qe_usb_clock_set(fhci->lowspeed_clk, USB_CLOCK >> 3);
+	}
+
+	/* Clear and disable any pending interrupts. */
+	out_be16(&fhci->regs->usb_event, 0xffff);
+	out_be16(&fhci->regs->usb_mask, 0);
+
+	ret = usb_add_hcd(hcd, usb_irq, IRQF_DISABLED);
+	if (ret < 0)
+		goto err_add_hcd;
+
+	fhci_dfs_create(fhci);
+
+	return 0;
+
+err_add_hcd:
+err_clocks:
+	irq_dispose_mapping(usb_irq);
+err_usb_irq:
+	free_irq(fhci->timer->irq, hcd);
+err_timer_irq:
+	gtm_put_timer16(fhci->timer);
+err_get_timer:
+err_pins:
+	while (--j >= 0)
+		qe_pin_free(fhci->pins[j]);
+err_gpios:
+	while (--i >= 0) {
+		if (gpio_is_valid(fhci->gpios[i]))
+			gpio_free(fhci->gpios[i]);
+	}
+	cpm_muram_free(pram_addr);
+err_pram:
+	iounmap(hcd->regs);
+err_regs:
+	usb_put_hcd(hcd);
+	return ret;
+}
+
+static int __devexit fhci_remove(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+	int i;
+	int j;
+
+	usb_remove_hcd(hcd);
+	free_irq(fhci->timer->irq, hcd);
+	gtm_put_timer16(fhci->timer);
+	cpm_muram_free(cpm_muram_offset(fhci->pram));
+	for (i = 0; i < NUM_GPIOS; i++) {
+		if (!gpio_is_valid(fhci->gpios[i]))
+			continue;
+		gpio_free(fhci->gpios[i]);
+	}
+	for (j = 0; j < NUM_PINS; j++)
+		qe_pin_free(fhci->pins[j]);
+	fhci_dfs_destroy(fhci);
+	usb_put_hcd(hcd);
+	return 0;
+}
+
+static int __devexit of_fhci_remove(struct of_device *ofdev)
+{
+	return fhci_remove(&ofdev->dev);
+}
+
+static struct of_device_id of_fhci_match[] = {
+	{ .compatible = "fsl,mpc8323-qe-usb", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, of_fhci_match);
+
+static struct of_platform_driver of_fhci_driver = {
+	.name		= "fsl,usb-fhci",
+	.match_table	= of_fhci_match,
+	.probe		= of_fhci_probe,
+	.remove		= __devexit_p(of_fhci_remove),
+};
+
+static int __init fhci_module_init(void)
+{
+	return of_register_platform_driver(&of_fhci_driver);
+}
+module_init(fhci_module_init);
+
+static void __exit fhci_module_exit(void)
+{
+	of_unregister_platform_driver(&of_fhci_driver);
+}
+module_exit(fhci_module_exit);
+
+MODULE_DESCRIPTION("USB Freescale Host Controller Interface Driver");
+MODULE_AUTHOR("Shlomi Gridish <gridish@freescale.com>, "
+	      "Jerry Huang <Chang-Ming.Huang@freescale.com>, "
+	      "Anton Vorontsov <avorontsov@ru.mvista.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/fhci-hub.c b/drivers/usb/host/fhci-hub.c
new file mode 100644
index 0000000..0cfaedc
--- /dev/null
+++ b/drivers/usb/host/fhci-hub.c
@@ -0,0 +1,345 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/usb.h>
+#include <linux/gpio.h>
+#include <asm/qe.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+/* virtual root hub specific descriptor */
+static u8 root_hub_des[] = {
+	0x09, /* blength */
+	0x29, /* bDescriptorType;hub-descriptor */
+	0x01, /* bNbrPorts */
+	0x00, /* wHubCharacteristics */
+	0x00,
+	0x01, /* bPwrOn2pwrGood;2ms */
+	0x00, /* bHubContrCurrent;0mA */
+	0x00, /* DeviceRemoveable */
+	0xff, /* PortPwrCtrlMask */
+};
+
+static void fhci_gpio_set_value(struct fhci_hcd *fhci, int gpio_nr, bool on)
+{
+	int gpio = fhci->gpios[gpio_nr];
+	bool alow = fhci->alow_gpios[gpio_nr];
+
+	if (!gpio_is_valid(gpio))
+		return;
+
+	gpio_set_value(gpio, on ^ alow);
+	mdelay(5);
+}
+
+void fhci_config_transceiver(struct fhci_hcd *fhci,
+			     enum fhci_port_status status)
+{
+	fhci_dbg(fhci, "-> %s: %d\n", __func__, status);
+
+	switch (status) {
+	case FHCI_PORT_POWER_OFF:
+		fhci_gpio_set_value(fhci, GPIO_POWER, false);
+		break;
+	case FHCI_PORT_DISABLED:
+	case FHCI_PORT_WAITING:
+		fhci_gpio_set_value(fhci, GPIO_POWER, true);
+		break;
+	case FHCI_PORT_LOW:
+		fhci_gpio_set_value(fhci, GPIO_SPEED, false);
+		break;
+	case FHCI_PORT_FULL:
+		fhci_gpio_set_value(fhci, GPIO_SPEED, true);
+		break;
+	default:
+		WARN_ON(1);
+		break;
+	}
+
+	fhci_dbg(fhci, "<- %s: %d\n", __func__, status);
+}
+
+/* disable the USB port by clearing the EN bit in the USBMOD register */
+void fhci_port_disable(struct fhci_hcd *fhci)
+{
+	struct fhci_usb *usb = (struct fhci_usb *)fhci->usb_lld;
+	enum fhci_port_status port_status;
+
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	fhci_stop_sof_timer(fhci);
+
+	fhci_flush_all_transmissions(usb);
+
+	fhci_usb_disable_interrupt((struct fhci_usb *)fhci->usb_lld);
+	port_status = usb->port_status;
+	usb->port_status = FHCI_PORT_DISABLED;
+
+	/* Enable IDLE since we want to know if something comes along */
+	usb->saved_msk |= USB_E_IDLE_MASK;
+	out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk);
+
+	/* check if during the disconnection process attached new device */
+	if (port_status == FHCI_PORT_WAITING)
+		fhci_device_connected_interrupt(fhci);
+	usb->vroot_hub->port.wPortStatus &= ~USB_PORT_STAT_ENABLE;
+	usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_ENABLE;
+	fhci_usb_enable_interrupt((struct fhci_usb *)fhci->usb_lld);
+
+	fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+/* enable the USB port by setting the EN bit in the USBMOD register */
+void fhci_port_enable(void *lld)
+{
+	struct fhci_usb *usb = (struct fhci_usb *)lld;
+	struct fhci_hcd *fhci = usb->fhci;
+
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	fhci_config_transceiver(fhci, usb->port_status);
+
+	if ((usb->port_status != FHCI_PORT_FULL) &&
+			(usb->port_status != FHCI_PORT_LOW))
+		fhci_start_sof_timer(fhci);
+
+	usb->vroot_hub->port.wPortStatus |= USB_PORT_STAT_ENABLE;
+	usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_ENABLE;
+
+	fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+void fhci_io_port_generate_reset(struct fhci_hcd *fhci)
+{
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	gpio_direction_output(fhci->gpios[GPIO_USBOE], 0);
+	gpio_direction_output(fhci->gpios[GPIO_USBTP], 0);
+	gpio_direction_output(fhci->gpios[GPIO_USBTN], 0);
+
+	mdelay(5);
+
+	qe_pin_set_dedicated(fhci->pins[PIN_USBOE]);
+	qe_pin_set_dedicated(fhci->pins[PIN_USBTP]);
+	qe_pin_set_dedicated(fhci->pins[PIN_USBTN]);
+
+	fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+/* generate the RESET condition on the bus */
+void fhci_port_reset(void *lld)
+{
+	struct fhci_usb *usb = (struct fhci_usb *)lld;
+	struct fhci_hcd *fhci = usb->fhci;
+	u8 mode;
+	u16 mask;
+
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	fhci_stop_sof_timer(fhci);
+	/* disable the USB controller */
+	mode = in_8(&fhci->regs->usb_mod);
+	out_8(&fhci->regs->usb_mod, mode & (~USB_MODE_EN));
+
+	/* disable idle interrupts */
+	mask = in_be16(&fhci->regs->usb_mask);
+	out_be16(&fhci->regs->usb_mask, mask & (~USB_E_IDLE_MASK));
+
+	fhci_io_port_generate_reset(fhci);
+
+	/* enable interrupt on this endpoint */
+	out_be16(&fhci->regs->usb_mask, mask);
+
+	/* enable the USB controller */
+	mode = in_8(&fhci->regs->usb_mod);
+	out_8(&fhci->regs->usb_mod, mode | USB_MODE_EN);
+	fhci_start_sof_timer(fhci);
+
+	fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+int fhci_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+	int ret = 0;
+	unsigned long flags;
+
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	spin_lock_irqsave(&fhci->lock, flags);
+
+	if (fhci->vroot_hub->port.wPortChange & (USB_PORT_STAT_C_CONNECTION |
+			USB_PORT_STAT_C_ENABLE | USB_PORT_STAT_C_SUSPEND |
+			USB_PORT_STAT_C_RESET | USB_PORT_STAT_C_OVERCURRENT)) {
+		*buf = 1 << 1;
+		ret = 1;
+		fhci_dbg(fhci, "-- %s\n", __func__);
+	}
+
+	spin_unlock_irqrestore(&fhci->lock, flags);
+
+	fhci_dbg(fhci, "<- %s\n", __func__);
+
+	return ret;
+}
+
+int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+			    u16 wIndex, char *buf, u16 wLength)
+{
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+	int retval = 0;
+	int len = 0;
+	struct usb_hub_status *hub_status;
+	struct usb_port_status *port_status;
+	unsigned long flags;
+
+	spin_lock_irqsave(&fhci->lock, flags);
+
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	switch (typeReq) {
+	case ClearHubFeature:
+		switch (wValue) {
+		case C_HUB_LOCAL_POWER:
+		case C_HUB_OVER_CURRENT:
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case ClearPortFeature:
+		fhci->vroot_hub->feature &= (1 << wValue);
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			fhci->vroot_hub->port.wPortStatus &=
+			    ~USB_PORT_STAT_ENABLE;
+			fhci_port_disable(fhci);
+			break;
+		case USB_PORT_FEAT_C_ENABLE:
+			fhci->vroot_hub->port.wPortChange &=
+			    ~USB_PORT_STAT_C_ENABLE;
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			fhci->vroot_hub->port.wPortStatus &=
+			    ~USB_PORT_STAT_SUSPEND;
+			fhci_stop_sof_timer(fhci);
+			break;
+		case USB_PORT_FEAT_C_SUSPEND:
+			fhci->vroot_hub->port.wPortChange &=
+			    ~USB_PORT_STAT_C_SUSPEND;
+			break;
+		case USB_PORT_FEAT_POWER:
+			fhci->vroot_hub->port.wPortStatus &=
+			    ~USB_PORT_STAT_POWER;
+			fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF);
+			break;
+		case USB_PORT_FEAT_C_CONNECTION:
+			fhci->vroot_hub->port.wPortChange &=
+			    ~USB_PORT_STAT_C_CONNECTION;
+			break;
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			fhci->vroot_hub->port.wPortChange &=
+			    ~USB_PORT_STAT_C_OVERCURRENT;
+			break;
+		case USB_PORT_FEAT_C_RESET:
+			fhci->vroot_hub->port.wPortChange &=
+			    ~USB_PORT_STAT_C_RESET;
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case GetHubDescriptor:
+		memcpy(buf, root_hub_des, sizeof(root_hub_des));
+		buf[3] = 0x11; /* per-port power, no ovrcrnt */
+		len = (buf[0] < wLength) ? buf[0] : wLength;
+		break;
+	case GetHubStatus:
+		hub_status = (struct usb_hub_status *)buf;
+		hub_status->wHubStatus =
+		    cpu_to_le16(fhci->vroot_hub->hub.wHubStatus);
+		hub_status->wHubChange =
+		    cpu_to_le16(fhci->vroot_hub->hub.wHubChange);
+		len = 4;
+		break;
+	case GetPortStatus:
+		port_status = (struct usb_port_status *)buf;
+		port_status->wPortStatus =
+		    cpu_to_le16(fhci->vroot_hub->port.wPortStatus);
+		port_status->wPortChange =
+		    cpu_to_le16(fhci->vroot_hub->port.wPortChange);
+		len = 4;
+		break;
+	case SetHubFeature:
+		switch (wValue) {
+		case C_HUB_OVER_CURRENT:
+		case C_HUB_LOCAL_POWER:
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case SetPortFeature:
+		fhci->vroot_hub->feature |= (1 << wValue);
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			fhci->vroot_hub->port.wPortStatus |=
+			    USB_PORT_STAT_ENABLE;
+			fhci_port_enable(fhci->usb_lld);
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			fhci->vroot_hub->port.wPortStatus |=
+			    USB_PORT_STAT_SUSPEND;
+			fhci_stop_sof_timer(fhci);
+			break;
+		case USB_PORT_FEAT_RESET:
+			fhci->vroot_hub->port.wPortStatus |=
+			    USB_PORT_STAT_RESET;
+			fhci_port_reset(fhci->usb_lld);
+			fhci->vroot_hub->port.wPortStatus |=
+			    USB_PORT_STAT_ENABLE;
+			fhci->vroot_hub->port.wPortStatus &=
+			    ~USB_PORT_STAT_RESET;
+			break;
+		case USB_PORT_FEAT_POWER:
+			fhci->vroot_hub->port.wPortStatus |=
+			    USB_PORT_STAT_POWER;
+			fhci_config_transceiver(fhci, FHCI_PORT_WAITING);
+			break;
+		default:
+			goto error;
+		}
+		break;
+	default:
+error:
+		retval = -EPIPE;
+	}
+
+	fhci_dbg(fhci, "<- %s\n", __func__);
+
+	spin_unlock_irqrestore(&fhci->lock, flags);
+
+	return retval;
+}
diff --git a/drivers/usb/host/fhci-mem.c b/drivers/usb/host/fhci-mem.c
new file mode 100644
index 0000000..2c0736c
--- /dev/null
+++ b/drivers/usb/host/fhci-mem.c
@@ -0,0 +1,113 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+static void init_td(struct td *td)
+{
+	memset(td, 0, sizeof(*td));
+	INIT_LIST_HEAD(&td->node);
+	INIT_LIST_HEAD(&td->frame_lh);
+}
+
+static void init_ed(struct ed *ed)
+{
+	memset(ed, 0, sizeof(*ed));
+	INIT_LIST_HEAD(&ed->td_list);
+	INIT_LIST_HEAD(&ed->node);
+}
+
+static struct td *get_empty_td(struct fhci_hcd *fhci)
+{
+	struct td *td;
+
+	if (!list_empty(&fhci->empty_tds)) {
+		td = list_entry(fhci->empty_tds.next, struct td, node);
+		list_del(fhci->empty_tds.next);
+	} else {
+		td = kmalloc(sizeof(*td), GFP_ATOMIC);
+		if (!td)
+			fhci_err(fhci, "No memory to allocate to TD\n");
+		else
+			init_td(td);
+	}
+
+	return td;
+}
+
+void fhci_recycle_empty_td(struct fhci_hcd *fhci, struct td *td)
+{
+	init_td(td);
+	list_add(&td->node, &fhci->empty_tds);
+}
+
+struct ed *fhci_get_empty_ed(struct fhci_hcd *fhci)
+{
+	struct ed *ed;
+
+	if (!list_empty(&fhci->empty_eds)) {
+		ed = list_entry(fhci->empty_eds.next, struct ed, node);
+		list_del(fhci->empty_eds.next);
+	} else {
+		ed = kmalloc(sizeof(*ed), GFP_ATOMIC);
+		if (!ed)
+			fhci_err(fhci, "No memory to allocate to ED\n");
+		else
+			init_ed(ed);
+	}
+
+	return ed;
+}
+
+void fhci_recycle_empty_ed(struct fhci_hcd *fhci, struct ed *ed)
+{
+	init_ed(ed);
+	list_add(&ed->node, &fhci->empty_eds);
+}
+
+struct td *fhci_td_fill(struct fhci_hcd *fhci, struct urb *urb,
+			struct urb_priv *urb_priv, struct ed *ed, u16 index,
+			enum fhci_ta_type type, int toggle, u8 *data, u32 len,
+			u16 interval, u16 start_frame, bool ioc)
+{
+	struct td *td = get_empty_td(fhci);
+
+	if (!td)
+		return NULL;
+
+	td->urb = urb;
+	td->ed = ed;
+	td->type = type;
+	td->toggle = toggle;
+	td->data = data;
+	td->len = len;
+	td->iso_index = index;
+	td->interval = interval;
+	td->start_frame = start_frame;
+	td->ioc = ioc;
+	td->status = USB_TD_OK;
+
+	urb_priv->tds[index] = td;
+
+	return td;
+}
diff --git a/drivers/usb/host/fhci-q.c b/drivers/usb/host/fhci-q.c
new file mode 100644
index 0000000..b0a1446
--- /dev/null
+++ b/drivers/usb/host/fhci-q.c
@@ -0,0 +1,284 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+/* maps the hardware error code to the USB error code */
+static int status_to_error(u32 status)
+{
+	if (status == USB_TD_OK)
+		return 0;
+	else if (status & USB_TD_RX_ER_CRC)
+		return -EILSEQ;
+	else if (status & USB_TD_RX_ER_NONOCT)
+		return -EPROTO;
+	else if (status & USB_TD_RX_ER_OVERUN)
+		return -ECOMM;
+	else if (status & USB_TD_RX_ER_BITSTUFF)
+		return -EPROTO;
+	else if (status & USB_TD_RX_ER_PID)
+		return -EILSEQ;
+	else if (status & (USB_TD_TX_ER_NAK | USB_TD_TX_ER_TIMEOUT))
+		return -ETIMEDOUT;
+	else if (status & USB_TD_TX_ER_STALL)
+		return -EPIPE;
+	else if (status & USB_TD_TX_ER_UNDERUN)
+		return -ENOSR;
+	else if (status & USB_TD_RX_DATA_UNDERUN)
+		return -EREMOTEIO;
+	else if (status & USB_TD_RX_DATA_OVERUN)
+		return -EOVERFLOW;
+	else
+		return -EINVAL;
+}
+
+void fhci_add_td_to_frame(struct fhci_time_frame *frame, struct td *td)
+{
+	list_add_tail(&td->frame_lh, &frame->tds_list);
+}
+
+void fhci_add_tds_to_ed(struct ed *ed, struct td **td_list, int number)
+{
+	int i;
+
+	for (i = 0; i < number; i++) {
+		struct td *td = td_list[i];
+		list_add_tail(&td->node, &ed->td_list);
+	}
+	if (ed->td_head == NULL)
+		ed->td_head = td_list[0];
+}
+
+static struct td *peek_td_from_ed(struct ed *ed)
+{
+	struct td *td;
+
+	if (!list_empty(&ed->td_list))
+		td = list_entry(ed->td_list.next, struct td, node);
+	else
+		td = NULL;
+
+	return td;
+}
+
+struct td *fhci_remove_td_from_frame(struct fhci_time_frame *frame)
+{
+	struct td *td;
+
+	if (!list_empty(&frame->tds_list)) {
+		td = list_entry(frame->tds_list.next, struct td, frame_lh);
+		list_del_init(frame->tds_list.next);
+	} else
+		td = NULL;
+
+	return td;
+}
+
+struct td *fhci_peek_td_from_frame(struct fhci_time_frame *frame)
+{
+	struct td *td;
+
+	if (!list_empty(&frame->tds_list))
+		td = list_entry(frame->tds_list.next, struct td, frame_lh);
+	else
+		td = NULL;
+
+	return td;
+}
+
+struct td *fhci_remove_td_from_ed(struct ed *ed)
+{
+	struct td *td;
+
+	if (!list_empty(&ed->td_list)) {
+		td = list_entry(ed->td_list.next, struct td, node);
+		list_del_init(ed->td_list.next);
+
+		/* if this TD was the ED's head, find next TD */
+		if (!list_empty(&ed->td_list))
+			ed->td_head = list_entry(ed->td_list.next, struct td,
+						 node);
+		else
+			ed->td_head = NULL;
+	} else
+		td = NULL;
+
+	return td;
+}
+
+struct td *fhci_remove_td_from_done_list(struct fhci_controller_list *p_list)
+{
+	struct td *td;
+
+	if (!list_empty(&p_list->done_list)) {
+		td = list_entry(p_list->done_list.next, struct td, node);
+		list_del_init(p_list->done_list.next);
+	} else
+		td = NULL;
+
+	return td;
+}
+
+void fhci_move_td_from_ed_to_done_list(struct fhci_usb *usb, struct ed *ed)
+{
+	struct td *td;
+
+	td = ed->td_head;
+	list_del_init(&td->node);
+
+	/* If this TD was the ED's head,find next TD */
+	if (!list_empty(&ed->td_list))
+		ed->td_head = list_entry(ed->td_list.next, struct td, node);
+	else {
+		ed->td_head = NULL;
+		ed->state = FHCI_ED_SKIP;
+	}
+	ed->toggle_carry = td->toggle;
+	list_add_tail(&td->node, &usb->hc_list->done_list);
+	if (td->ioc)
+		usb->transfer_confirm(usb->fhci);
+}
+
+/* free done FHCI URB resource such as ED and TD */
+static void free_urb_priv(struct fhci_hcd *fhci, struct urb *urb)
+{
+	int i;
+	struct urb_priv *urb_priv = urb->hcpriv;
+	struct ed *ed = urb_priv->ed;
+
+	for (i = 0; i < urb_priv->num_of_tds; i++) {
+		list_del_init(&urb_priv->tds[i]->node);
+		fhci_recycle_empty_td(fhci, urb_priv->tds[i]);
+	}
+
+	/* if this TD was the ED's head,find the next TD */
+	if (!list_empty(&ed->td_list))
+		ed->td_head = list_entry(ed->td_list.next, struct td, node);
+	else
+		ed->td_head = NULL;
+
+	kfree(urb_priv->tds);
+	kfree(urb_priv);
+	urb->hcpriv = NULL;
+
+	/* if this TD was the ED's head,find next TD */
+	if (ed->td_head == NULL)
+		list_del_init(&ed->node);
+	fhci->active_urbs--;
+}
+
+/* this routine called to complete and free done URB */
+void fhci_urb_complete_free(struct fhci_hcd *fhci, struct urb *urb)
+{
+	free_urb_priv(fhci, urb);
+
+	if (urb->status == -EINPROGRESS) {
+		if (urb->actual_length != urb->transfer_buffer_length &&
+				urb->transfer_flags & URB_SHORT_NOT_OK)
+			urb->status = -EREMOTEIO;
+		else
+			urb->status = 0;
+	}
+
+	usb_hcd_unlink_urb_from_ep(fhci_to_hcd(fhci), urb);
+
+	spin_unlock(&fhci->lock);
+
+	usb_hcd_giveback_urb(fhci_to_hcd(fhci), urb, urb->status);
+
+	spin_lock(&fhci->lock);
+}
+
+/*
+ * caculate transfer length/stats and update the urb
+ * Precondition: irqsafe(only for urb-?status locking)
+ */
+void fhci_done_td(struct urb *urb, struct td *td)
+{
+	struct ed *ed = td->ed;
+	u32 cc = td->status;
+
+	/* ISO...drivers see per-TD length/status */
+	if (ed->mode == FHCI_TF_ISO) {
+		u32 len;
+		if (!(urb->transfer_flags & URB_SHORT_NOT_OK &&
+				cc == USB_TD_RX_DATA_UNDERUN))
+			cc = USB_TD_OK;
+
+		if (usb_pipeout(urb->pipe))
+			len = urb->iso_frame_desc[td->iso_index].length;
+		else
+			len = td->actual_len;
+
+		urb->actual_length += len;
+		urb->iso_frame_desc[td->iso_index].actual_length = len;
+		urb->iso_frame_desc[td->iso_index].status =
+			status_to_error(cc);
+	}
+
+	/* BULK,INT,CONTROL... drivers see aggregate length/status,
+	 * except that "setup" bytes aren't counted and "short" transfers
+	 * might not be reported as errors.
+	 */
+	else {
+		if (td->error_cnt >= 3)
+			urb->error_count = 3;
+
+		/* control endpoint only have soft stalls */
+
+		/* update packet status if needed(short may be ok) */
+		if (!(urb->transfer_flags & URB_SHORT_NOT_OK) &&
+				cc == USB_TD_RX_DATA_UNDERUN) {
+			ed->state = FHCI_ED_OPER;
+			cc = USB_TD_OK;
+		}
+		if (cc != USB_TD_OK) {
+			if (urb->status == -EINPROGRESS)
+				urb->status = status_to_error(cc);
+		}
+
+		/* count all non-empty packets except control SETUP packet */
+		if (td->type != FHCI_TA_SETUP || td->iso_index != 0)
+			urb->actual_length += td->actual_len;
+	}
+}
+
+/* there are some pedning request to unlink */
+void fhci_del_ed_list(struct fhci_hcd *fhci, struct ed *ed)
+{
+	struct td *td = peek_td_from_ed(ed);
+	struct urb *urb = td->urb;
+	struct urb_priv *urb_priv = urb->hcpriv;
+
+	if (urb_priv->state == URB_DEL) {
+		td = fhci_remove_td_from_ed(ed);
+		/* HC may have partly processed this TD */
+		if (td->status != USB_TD_INPROGRESS)
+			fhci_done_td(urb, td);
+
+		/* URB is done;clean up */
+		if (++(urb_priv->tds_cnt) == urb_priv->num_of_tds)
+			fhci_urb_complete_free(fhci, urb);
+	}
+}
diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c
new file mode 100644
index 0000000..bb63b68
--- /dev/null
+++ b/drivers/usb/host/fhci-sched.c
@@ -0,0 +1,888 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/usb.h>
+#include <asm/qe.h>
+#include <asm/fsl_gtm.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+static void recycle_frame(struct fhci_usb *usb, struct packet *pkt)
+{
+	pkt->data = NULL;
+	pkt->len = 0;
+	pkt->status = USB_TD_OK;
+	pkt->info = 0;
+	pkt->priv_data = NULL;
+
+	cq_put(usb->ep0->empty_frame_Q, pkt);
+}
+
+/* confirm submitted packet */
+void fhci_transaction_confirm(struct fhci_usb *usb, struct packet *pkt)
+{
+	struct td *td;
+	struct packet *td_pkt;
+	struct ed *ed;
+	u32 trans_len;
+	bool td_done = false;
+
+	td = fhci_remove_td_from_frame(usb->actual_frame);
+	td_pkt = td->pkt;
+	trans_len = pkt->len;
+	td->status = pkt->status;
+	if (td->type == FHCI_TA_IN && td_pkt->info & PKT_DUMMY_PACKET) {
+		if ((td->data + td->actual_len) && trans_len)
+			memcpy(td->data + td->actual_len, pkt->data,
+			       trans_len);
+		cq_put(usb->ep0->dummy_packets_Q, pkt->data);
+	}
+
+	recycle_frame(usb, pkt);
+
+	ed = td->ed;
+	if (ed->mode == FHCI_TF_ISO) {
+		if (ed->td_list.next->next != &ed->td_list) {
+			struct td *td_next =
+			    list_entry(ed->td_list.next->next, struct td,
+				       node);
+
+			td_next->start_frame = usb->actual_frame->frame_num;
+		}
+		td->actual_len = trans_len;
+		td_done = true;
+	} else if ((td->status & USB_TD_ERROR) &&
+			!(td->status & USB_TD_TX_ER_NAK)) {
+		/*
+		 * There was an error on the transaction (but not NAK).
+		 * If it is fatal error (data underrun, stall, bad pid or 3
+		 * errors exceeded), mark this TD as done.
+		 */
+		if ((td->status & USB_TD_RX_DATA_UNDERUN) ||
+				(td->status & USB_TD_TX_ER_STALL) ||
+				(td->status & USB_TD_RX_ER_PID) ||
+				(++td->error_cnt >= 3)) {
+			ed->state = FHCI_ED_HALTED;
+			td_done = true;
+
+			if (td->status & USB_TD_RX_DATA_UNDERUN) {
+				fhci_dbg(usb->fhci, "td err fu\n");
+				td->toggle = !td->toggle;
+				td->actual_len += trans_len;
+			} else {
+				fhci_dbg(usb->fhci, "td err f!u\n");
+			}
+		} else {
+			fhci_dbg(usb->fhci, "td err !f\n");
+			/* it is not a fatal error -retry this transaction */
+			td->nak_cnt = 0;
+			td->error_cnt++;
+			td->status = USB_TD_OK;
+		}
+	} else if (td->status & USB_TD_TX_ER_NAK) {
+		/* there was a NAK response */
+		fhci_vdbg(usb->fhci, "td nack\n");
+		td->nak_cnt++;
+		td->error_cnt = 0;
+		td->status = USB_TD_OK;
+	} else {
+		/* there was no error on transaction */
+		td->error_cnt = 0;
+		td->nak_cnt = 0;
+		td->toggle = !td->toggle;
+		td->actual_len += trans_len;
+
+		if (td->len == td->actual_len)
+			td_done = true;
+	}
+
+	if (td_done)
+		fhci_move_td_from_ed_to_done_list(usb, ed);
+}
+
+/*
+ * Flush all transmitted packets from BDs
+ * This routine is called when disabling the USB port to flush all
+ * transmissions that are allready scheduled in the BDs
+ */
+void fhci_flush_all_transmissions(struct fhci_usb *usb)
+{
+	u8 mode;
+	struct td *td;
+
+	mode = in_8(&usb->fhci->regs->usb_mod);
+	clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_EN);
+
+	fhci_flush_bds(usb);
+
+	while ((td = fhci_peek_td_from_frame(usb->actual_frame)) != NULL) {
+		struct packet *pkt = td->pkt;
+
+		pkt->status = USB_TD_TX_ER_TIMEOUT;
+		fhci_transaction_confirm(usb, pkt);
+	}
+
+	usb->actual_frame->frame_status = FRAME_END_TRANSMISSION;
+
+	/* reset the event register */
+	out_be16(&usb->fhci->regs->usb_event, 0xffff);
+	/* enable the USB controller */
+	out_8(&usb->fhci->regs->usb_mod, mode | USB_MODE_EN);
+}
+
+/*
+ * This function forms the packet and transmit the packet. This function
+ * will handle all endpoint type:ISO,interrupt,control and bulk
+ */
+static int add_packet(struct fhci_usb *usb, struct ed *ed, struct td *td)
+{
+	u32 fw_transaction_time, len = 0;
+	struct packet *pkt;
+	u8 *data = NULL;
+
+	/* calcalate data address,len and toggle and then add the transaction */
+	if (td->toggle == USB_TD_TOGGLE_CARRY)
+		td->toggle = ed->toggle_carry;
+
+	switch (ed->mode) {
+	case FHCI_TF_ISO:
+		len = td->len;
+		if (td->type != FHCI_TA_IN)
+			data = td->data;
+		break;
+	case FHCI_TF_CTRL:
+	case FHCI_TF_BULK:
+		len = min(td->len - td->actual_len, ed->max_pkt_size);
+		if (!((td->type == FHCI_TA_IN) &&
+		      ((len + td->actual_len) == td->len)))
+			data = td->data + td->actual_len;
+		break;
+	case FHCI_TF_INTR:
+		len = min(td->len, ed->max_pkt_size);
+		if (!((td->type == FHCI_TA_IN) &&
+		      ((td->len + CRC_SIZE) >= ed->max_pkt_size)))
+			data = td->data;
+		break;
+	default:
+		break;
+	}
+
+	if (usb->port_status == FHCI_PORT_FULL)
+		fw_transaction_time = (((len + PROTOCOL_OVERHEAD) * 11) >> 4);
+	else
+		fw_transaction_time = ((len + PROTOCOL_OVERHEAD) * 6);
+
+	/* check if there's enough space in this frame to submit this TD */
+	if (usb->actual_frame->total_bytes + len + PROTOCOL_OVERHEAD >=
+			usb->max_bytes_per_frame) {
+		fhci_vdbg(usb->fhci, "not enough space in this frame: "
+			  "%d %d %d\n", usb->actual_frame->total_bytes, len,
+			  usb->max_bytes_per_frame);
+		return -1;
+	}
+
+	/* check if there's enough time in this frame to submit this TD */
+	if (usb->actual_frame->frame_status != FRAME_IS_PREPARED &&
+	    (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION ||
+	     (fw_transaction_time + usb->sw_transaction_time >=
+	      1000 - fhci_get_sof_timer_count(usb)))) {
+		fhci_dbg(usb->fhci, "not enough time in this frame\n");
+		return -1;
+	}
+
+	/* update frame object fields before transmitting */
+	pkt = cq_get(usb->ep0->empty_frame_Q);
+	if (!pkt) {
+		fhci_dbg(usb->fhci, "there is no empty frame\n");
+		return -1;
+	}
+	td->pkt = pkt;
+
+	pkt->info = 0;
+	if (data == NULL) {
+		data = cq_get(usb->ep0->dummy_packets_Q);
+		BUG_ON(!data);
+		pkt->info = PKT_DUMMY_PACKET;
+	}
+	pkt->data = data;
+	pkt->len = len;
+	pkt->status = USB_TD_OK;
+	/* update TD status field before transmitting */
+	td->status = USB_TD_INPROGRESS;
+	/* update actual frame time object with the actual transmission */
+	usb->actual_frame->total_bytes += (len + PROTOCOL_OVERHEAD);
+	fhci_add_td_to_frame(usb->actual_frame, td);
+
+	if (usb->port_status != FHCI_PORT_FULL &&
+			usb->port_status != FHCI_PORT_LOW) {
+		pkt->status = USB_TD_TX_ER_TIMEOUT;
+		pkt->len = 0;
+		fhci_transaction_confirm(usb, pkt);
+	} else if (fhci_host_transaction(usb, pkt, td->type, ed->dev_addr,
+			ed->ep_addr, ed->mode, ed->speed, td->toggle)) {
+		/* remove TD from actual frame */
+		list_del_init(&td->frame_lh);
+		td->status = USB_TD_OK;
+		if (pkt->info & PKT_DUMMY_PACKET)
+			cq_put(usb->ep0->dummy_packets_Q, pkt->data);
+		recycle_frame(usb, pkt);
+		usb->actual_frame->total_bytes -= (len + PROTOCOL_OVERHEAD);
+		fhci_err(usb->fhci, "host transaction failed\n");
+		return -1;
+	}
+
+	return len;
+}
+
+static void move_head_to_tail(struct list_head *list)
+{
+	struct list_head *node = list->next;
+
+	if (!list_empty(list)) {
+		list_del(node);
+		list_add_tail(node, list);
+	}
+}
+
+/*
+ * This function goes through the endpoint list and schedules the
+ * transactions within this list
+ */
+static int scan_ed_list(struct fhci_usb *usb,
+			struct list_head *list, enum fhci_tf_mode list_type)
+{
+	static const int frame_part[4] = {
+		[FHCI_TF_CTRL] = MAX_BYTES_PER_FRAME,
+		[FHCI_TF_ISO] = (MAX_BYTES_PER_FRAME *
+				 MAX_PERIODIC_FRAME_USAGE) / 100,
+		[FHCI_TF_BULK] = MAX_BYTES_PER_FRAME,
+		[FHCI_TF_INTR] = (MAX_BYTES_PER_FRAME *
+				  MAX_PERIODIC_FRAME_USAGE) / 100
+	};
+	struct ed *ed;
+	struct td *td;
+	int ans = 1;
+	u32 save_transaction_time = usb->sw_transaction_time;
+
+	list_for_each_entry(ed, list, node) {
+		td = ed->td_head;
+
+		if (!td || (td && td->status == USB_TD_INPROGRESS))
+			continue;
+
+		if (ed->state != FHCI_ED_OPER) {
+			if (ed->state == FHCI_ED_URB_DEL) {
+				td->status = USB_TD_OK;
+				fhci_move_td_from_ed_to_done_list(usb, ed);
+				ed->state = FHCI_ED_SKIP;
+			}
+			continue;
+		}
+
+		/*
+		 * if it isn't interrupt pipe or it is not iso pipe and the
+		 * interval time passed
+		 */
+		if ((list_type == FHCI_TF_INTR || list_type == FHCI_TF_ISO) &&
+				(((usb->actual_frame->frame_num -
+				   td->start_frame) & 0x7ff) < td->interval))
+			continue;
+
+		if (add_packet(usb, ed, td) < 0)
+			continue;
+
+		/* update time stamps in the TD */
+		td->start_frame = usb->actual_frame->frame_num;
+		usb->sw_transaction_time += save_transaction_time;
+
+		if (usb->actual_frame->total_bytes >=
+					usb->max_bytes_per_frame) {
+			usb->actual_frame->frame_status =
+				FRAME_DATA_END_TRANSMISSION;
+			fhci_push_dummy_bd(usb->ep0);
+			ans = 0;
+			break;
+		}
+
+		if (usb->actual_frame->total_bytes >= frame_part[list_type])
+			break;
+	}
+
+	/* be fair to each ED(move list head around) */
+	move_head_to_tail(list);
+	usb->sw_transaction_time = save_transaction_time;
+
+	return ans;
+}
+
+static u32 rotate_frames(struct fhci_usb *usb)
+{
+	struct fhci_hcd *fhci = usb->fhci;
+
+	if (!list_empty(&usb->actual_frame->tds_list)) {
+		if ((((in_be16(&fhci->pram->frame_num) & 0x07ff) -
+		      usb->actual_frame->frame_num) & 0x7ff) > 5)
+			fhci_flush_actual_frame(usb);
+		else
+			return -EINVAL;
+	}
+
+	usb->actual_frame->frame_status = FRAME_IS_PREPARED;
+	usb->actual_frame->frame_num = in_be16(&fhci->pram->frame_num) & 0x7ff;
+	usb->actual_frame->total_bytes = 0;
+
+	return 0;
+}
+
+/*
+ * This function schedule the USB transaction and will process the
+ * endpoint in the following order: iso, interrupt, control and bulk.
+ */
+void fhci_schedule_transactions(struct fhci_usb *usb)
+{
+	int left = 1;
+
+	if (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION)
+		if (rotate_frames(usb) != 0)
+			return;
+
+	if (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION)
+		return;
+
+	if (usb->actual_frame->total_bytes == 0) {
+		/*
+		 * schedule the next available ISO transfer
+		 *or next stage of the ISO transfer
+		 */
+		scan_ed_list(usb, &usb->hc_list->iso_list, FHCI_TF_ISO);
+
+		/*
+		 * schedule the next available interrupt transfer or
+		 * the next stage of the interrupt transfer
+		 */
+		scan_ed_list(usb, &usb->hc_list->intr_list, FHCI_TF_INTR);
+
+		/*
+		 * schedule the next available control transfer
+		 * or the next stage of the control transfer
+		 */
+		left = scan_ed_list(usb, &usb->hc_list->ctrl_list,
+				    FHCI_TF_CTRL);
+	}
+
+	/*
+	 * schedule the next available bulk transfer or the next stage of the
+	 * bulk transfer
+	 */
+	if (left > 0)
+		scan_ed_list(usb, &usb->hc_list->bulk_list, FHCI_TF_BULK);
+}
+
+/* Handles SOF interrupt */
+static void sof_interrupt(struct fhci_hcd *fhci)
+{
+	struct fhci_usb *usb = fhci->usb_lld;
+
+	if ((usb->port_status == FHCI_PORT_DISABLED) &&
+	    (usb->vroot_hub->port.wPortStatus & USB_PORT_STAT_CONNECTION) &&
+	    !(usb->vroot_hub->port.wPortChange & USB_PORT_STAT_C_CONNECTION)) {
+		if (usb->vroot_hub->port.wPortStatus & USB_PORT_STAT_LOW_SPEED)
+			usb->port_status = FHCI_PORT_LOW;
+		else
+			usb->port_status = FHCI_PORT_FULL;
+		/* Disable IDLE */
+		usb->saved_msk &= ~USB_E_IDLE_MASK;
+		out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk);
+	}
+
+	gtm_set_exact_timer16(fhci->timer, usb->max_frame_usage, false);
+
+	fhci_host_transmit_actual_frame(usb);
+	usb->actual_frame->frame_status = FRAME_IS_TRANSMITTED;
+
+	fhci_schedule_transactions(usb);
+}
+
+/* Handles device disconnected interrupt on port */
+void fhci_device_disconnected_interrupt(struct fhci_hcd *fhci)
+{
+	struct fhci_usb *usb = fhci->usb_lld;
+
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	fhci_usb_disable_interrupt(usb);
+	clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_LSS);
+	usb->port_status = FHCI_PORT_DISABLED;
+
+	fhci_stop_sof_timer(fhci);
+
+	/* Enable IDLE since we want to know if something comes along */
+	usb->saved_msk |= USB_E_IDLE_MASK;
+	out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk);
+
+	usb->vroot_hub->port.wPortStatus &= ~USB_PORT_STAT_CONNECTION;
+	usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_CONNECTION;
+	usb->max_bytes_per_frame = 0;
+	fhci_usb_enable_interrupt(usb);
+
+	fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+/* detect a new device connected on the USB port */
+void fhci_device_connected_interrupt(struct fhci_hcd *fhci)
+{
+
+	struct fhci_usb *usb = fhci->usb_lld;
+	int state;
+	int ret;
+
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	fhci_usb_disable_interrupt(usb);
+	state = fhci_ioports_check_bus_state(fhci);
+
+	/* low-speed device was connected to the USB port */
+	if (state == 1) {
+		ret = qe_usb_clock_set(fhci->lowspeed_clk, USB_CLOCK >> 3);
+		if (ret) {
+			fhci_warn(fhci, "Low-Speed device is not supported, "
+				  "try use BRGx\n");
+			goto out;
+		}
+
+		usb->port_status = FHCI_PORT_LOW;
+		setbits8(&usb->fhci->regs->usb_mod, USB_MODE_LSS);
+		usb->vroot_hub->port.wPortStatus |=
+		    (USB_PORT_STAT_LOW_SPEED |
+		     USB_PORT_STAT_CONNECTION);
+		usb->vroot_hub->port.wPortChange |=
+		    USB_PORT_STAT_C_CONNECTION;
+		usb->max_bytes_per_frame =
+		    (MAX_BYTES_PER_FRAME >> 3) - 7;
+		fhci_port_enable(usb);
+	} else if (state == 2) {
+		ret = qe_usb_clock_set(fhci->fullspeed_clk, USB_CLOCK);
+		if (ret) {
+			fhci_warn(fhci, "Full-Speed device is not supported, "
+				  "try use CLKx\n");
+			goto out;
+		}
+
+		usb->port_status = FHCI_PORT_FULL;
+		clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_LSS);
+		usb->vroot_hub->port.wPortStatus &=
+		    ~USB_PORT_STAT_LOW_SPEED;
+		usb->vroot_hub->port.wPortStatus |=
+		    USB_PORT_STAT_CONNECTION;
+		usb->vroot_hub->port.wPortChange |=
+		    USB_PORT_STAT_C_CONNECTION;
+		usb->max_bytes_per_frame = (MAX_BYTES_PER_FRAME - 15);
+		fhci_port_enable(usb);
+	}
+out:
+	fhci_usb_enable_interrupt(usb);
+	fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+irqreturn_t fhci_frame_limit_timer_irq(int irq, void *_hcd)
+{
+	struct usb_hcd *hcd = _hcd;
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+	struct fhci_usb *usb = fhci->usb_lld;
+
+	spin_lock(&fhci->lock);
+
+	gtm_set_exact_timer16(fhci->timer, 1000, false);
+
+	if (usb->actual_frame->frame_status == FRAME_IS_TRANSMITTED) {
+		usb->actual_frame->frame_status = FRAME_TIMER_END_TRANSMISSION;
+		fhci_push_dummy_bd(usb->ep0);
+	}
+
+	fhci_schedule_transactions(usb);
+
+	spin_unlock(&fhci->lock);
+
+	return IRQ_HANDLED;
+}
+
+/* Cancel transmission on the USB endpoint */
+static void abort_transmission(struct fhci_usb *usb)
+{
+	fhci_dbg(usb->fhci, "-> %s\n", __func__);
+	/* issue stop Tx command */
+	qe_issue_cmd(QE_USB_STOP_TX, QE_CR_SUBBLOCK_USB, EP_ZERO, 0);
+	/* flush Tx FIFOs */
+	out_8(&usb->fhci->regs->usb_comm, USB_CMD_FLUSH_FIFO | EP_ZERO);
+	udelay(1000);
+	/* reset Tx BDs */
+	fhci_flush_bds(usb);
+	/* issue restart Tx command */
+	qe_issue_cmd(QE_USB_RESTART_TX, QE_CR_SUBBLOCK_USB, EP_ZERO, 0);
+	fhci_dbg(usb->fhci, "<- %s\n", __func__);
+}
+
+irqreturn_t fhci_irq(struct usb_hcd *hcd)
+{
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+	struct fhci_usb *usb;
+	u16 usb_er = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&fhci->lock, flags);
+
+	usb = fhci->usb_lld;
+
+	usb_er |= in_be16(&usb->fhci->regs->usb_event) &
+		  in_be16(&usb->fhci->regs->usb_mask);
+
+	/* clear event bits for next time */
+	out_be16(&usb->fhci->regs->usb_event, usb_er);
+
+	fhci_dbg_isr(fhci, usb_er);
+
+	if (usb_er & USB_E_RESET_MASK) {
+		if ((usb->port_status == FHCI_PORT_FULL) ||
+				(usb->port_status == FHCI_PORT_LOW)) {
+			fhci_device_disconnected_interrupt(fhci);
+			usb_er &= ~USB_E_IDLE_MASK;
+		} else if (usb->port_status == FHCI_PORT_WAITING) {
+			usb->port_status = FHCI_PORT_DISCONNECTING;
+
+			/* Turn on IDLE since we want to disconnect */
+			usb->saved_msk |= USB_E_IDLE_MASK;
+			out_be16(&usb->fhci->regs->usb_event,
+				 usb->saved_msk);
+		} else if (usb->port_status == FHCI_PORT_DISABLED) {
+			if (fhci_ioports_check_bus_state(fhci) == 1 &&
+					usb->port_status != FHCI_PORT_LOW &&
+					usb->port_status != FHCI_PORT_FULL)
+				fhci_device_connected_interrupt(fhci);
+		}
+		usb_er &= ~USB_E_RESET_MASK;
+	}
+
+	if (usb_er & USB_E_MSF_MASK) {
+		abort_transmission(fhci->usb_lld);
+		usb_er &= ~USB_E_MSF_MASK;
+	}
+
+	if (usb_er & (USB_E_SOF_MASK | USB_E_SFT_MASK)) {
+		sof_interrupt(fhci);
+		usb_er &= ~(USB_E_SOF_MASK | USB_E_SFT_MASK);
+	}
+
+	if (usb_er & USB_E_TXB_MASK) {
+		fhci_tx_conf_interrupt(fhci->usb_lld);
+		usb_er &= ~USB_E_TXB_MASK;
+	}
+
+	if (usb_er & USB_E_TXE1_MASK) {
+		fhci_tx_conf_interrupt(fhci->usb_lld);
+		usb_er &= ~USB_E_TXE1_MASK;
+	}
+
+	if (usb_er & USB_E_IDLE_MASK) {
+		if (usb->port_status == FHCI_PORT_DISABLED &&
+				usb->port_status != FHCI_PORT_LOW &&
+				usb->port_status != FHCI_PORT_FULL) {
+			usb_er &= ~USB_E_RESET_MASK;
+			fhci_device_connected_interrupt(fhci);
+		} else if (usb->port_status ==
+				FHCI_PORT_DISCONNECTING) {
+			/* XXX usb->port_status = FHCI_PORT_WAITING; */
+			/* Disable IDLE */
+			usb->saved_msk &= ~USB_E_IDLE_MASK;
+			out_be16(&usb->fhci->regs->usb_mask,
+				 usb->saved_msk);
+		} else {
+			fhci_dbg_isr(fhci, -1);
+		}
+
+		usb_er &= ~USB_E_IDLE_MASK;
+	}
+
+	spin_unlock_irqrestore(&fhci->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+
+/*
+ * Process normal completions(error or sucess) and clean the schedule.
+ *
+ * This is the main path for handing urbs back to drivers. The only other patth
+ * is process_del_list(),which unlinks URBs by scanning EDs,instead of scanning
+ * the (re-reversed) done list as this does.
+ */
+static void process_done_list(unsigned long data)
+{
+	struct urb *urb;
+	struct ed *ed;
+	struct td *td;
+	struct urb_priv *urb_priv;
+	struct fhci_hcd *fhci = (struct fhci_hcd *)data;
+
+	disable_irq(fhci->timer->irq);
+	disable_irq(fhci_to_hcd(fhci)->irq);
+	spin_lock(&fhci->lock);
+
+	td = fhci_remove_td_from_done_list(fhci->hc_list);
+	while (td != NULL) {
+		urb = td->urb;
+		urb_priv = urb->hcpriv;
+		ed = td->ed;
+
+		/* update URB's length and status from TD */
+		fhci_done_td(urb, td);
+		urb_priv->tds_cnt++;
+
+		/*
+		 * if all this urb's TDs are done, call complete()
+		 * Interrupt transfers are the onley special case:
+		 * they are reissued,until "deleted" by usb_unlink_urb
+		 * (real work done in a SOF intr, by process_del_list)
+		 */
+		if (urb_priv->tds_cnt == urb_priv->num_of_tds) {
+			fhci_urb_complete_free(fhci, urb);
+		} else if (urb_priv->state == URB_DEL &&
+				ed->state == FHCI_ED_SKIP) {
+			fhci_del_ed_list(fhci, ed);
+			ed->state = FHCI_ED_OPER;
+		} else if (ed->state == FHCI_ED_HALTED) {
+			urb_priv->state = URB_DEL;
+			ed->state = FHCI_ED_URB_DEL;
+			fhci_del_ed_list(fhci, ed);
+			ed->state = FHCI_ED_OPER;
+		}
+
+		td = fhci_remove_td_from_done_list(fhci->hc_list);
+	}
+
+	spin_unlock(&fhci->lock);
+	enable_irq(fhci->timer->irq);
+	enable_irq(fhci_to_hcd(fhci)->irq);
+}
+
+DECLARE_TASKLET(fhci_tasklet, process_done_list, 0);
+
+/* transfer complted callback */
+u32 fhci_transfer_confirm_callback(struct fhci_hcd *fhci)
+{
+	if (!fhci->process_done_task->state)
+		tasklet_schedule(fhci->process_done_task);
+	return 0;
+}
+
+/*
+ * adds urb to the endpoint descriptor list
+ * arguments:
+ * fhci		data structure for the Low level host controller
+ * ep		USB Host endpoint data structure
+ * urb		USB request block data structure
+ */
+void fhci_queue_urb(struct fhci_hcd *fhci, struct urb *urb)
+{
+	struct ed *ed = urb->ep->hcpriv;
+	struct urb_priv *urb_priv = urb->hcpriv;
+	u32 data_len = urb->transfer_buffer_length;
+	int urb_state = 0;
+	int toggle = 0;
+	struct td *td;
+	u8 *data;
+	u16 cnt = 0;
+
+	if (ed == NULL) {
+		ed = fhci_get_empty_ed(fhci);
+		ed->dev_addr = usb_pipedevice(urb->pipe);
+		ed->ep_addr = usb_pipeendpoint(urb->pipe);
+		switch (usb_pipetype(urb->pipe)) {
+		case PIPE_CONTROL:
+			ed->mode = FHCI_TF_CTRL;
+			break;
+		case PIPE_BULK:
+			ed->mode = FHCI_TF_BULK;
+			break;
+		case PIPE_INTERRUPT:
+			ed->mode = FHCI_TF_INTR;
+			break;
+		case PIPE_ISOCHRONOUS:
+			ed->mode = FHCI_TF_ISO;
+			break;
+		default:
+			break;
+		}
+		ed->speed = (urb->dev->speed == USB_SPEED_LOW) ?
+			FHCI_LOW_SPEED : FHCI_FULL_SPEED;
+		ed->max_pkt_size = usb_maxpacket(urb->dev,
+			urb->pipe, usb_pipeout(urb->pipe));
+		urb->ep->hcpriv = ed;
+		fhci_dbg(fhci, "new ep speed=%d max_pkt_size=%d\n",
+			 ed->speed, ed->max_pkt_size);
+	}
+
+	/* for ISO transfer calculate start frame index */
+	if (ed->mode == FHCI_TF_ISO && urb->transfer_flags & URB_ISO_ASAP)
+		urb->start_frame = ed->td_head ? ed->last_iso + 1 :
+						 get_frame_num(fhci);
+
+	/*
+	 * OHCI handles the DATA toggle itself,we just use the USB
+	 * toggle bits
+	 */
+	if (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+			  usb_pipeout(urb->pipe)))
+		toggle = USB_TD_TOGGLE_CARRY;
+	else {
+		toggle = USB_TD_TOGGLE_DATA0;
+		usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+			      usb_pipeout(urb->pipe), 1);
+	}
+
+	urb_priv->tds_cnt = 0;
+	urb_priv->ed = ed;
+	if (data_len > 0)
+		data = urb->transfer_buffer;
+	else
+		data = NULL;
+
+	switch (ed->mode) {
+	case FHCI_TF_BULK:
+		if (urb->transfer_flags & URB_ZERO_PACKET &&
+				urb->transfer_buffer_length > 0 &&
+				((urb->transfer_buffer_length %
+				usb_maxpacket(urb->dev, urb->pipe,
+				usb_pipeout(urb->pipe))) == 0))
+			urb_state = US_BULK0;
+		while (data_len > 4096) {
+			td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt,
+				usb_pipeout(urb->pipe) ? FHCI_TA_OUT :
+							 FHCI_TA_IN,
+				cnt ? USB_TD_TOGGLE_CARRY :
+				      toggle,
+				data, 4096, 0, 0, true);
+			data += 4096;
+			data_len -= 4096;
+			cnt++;
+		}
+
+		td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt,
+			usb_pipeout(urb->pipe) ? FHCI_TA_OUT : FHCI_TA_IN,
+			cnt ? USB_TD_TOGGLE_CARRY : toggle,
+			data, data_len, 0, 0, true);
+		cnt++;
+
+		if (urb->transfer_flags & URB_ZERO_PACKET &&
+				cnt < urb_priv->num_of_tds) {
+			td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt,
+				usb_pipeout(urb->pipe) ? FHCI_TA_OUT :
+							 FHCI_TA_IN,
+				USB_TD_TOGGLE_CARRY, NULL, 0, 0, 0, true);
+			cnt++;
+		}
+		break;
+	case FHCI_TF_INTR:
+		urb->start_frame = get_frame_num(fhci) + 1;
+		td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++,
+			usb_pipeout(urb->pipe) ? FHCI_TA_OUT : FHCI_TA_IN,
+			USB_TD_TOGGLE_DATA0, data, data_len,
+			urb->interval, urb->start_frame, true);
+		break;
+	case FHCI_TF_CTRL:
+		ed->dev_addr = usb_pipedevice(urb->pipe);
+		ed->max_pkt_size = usb_maxpacket(urb->dev, urb->pipe,
+			usb_pipeout(urb->pipe));
+		td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++, FHCI_TA_SETUP,
+			USB_TD_TOGGLE_DATA0, urb->setup_packet, 8, 0, 0, true);
+
+		if (data_len > 0) {
+			td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++,
+				usb_pipeout(urb->pipe) ? FHCI_TA_OUT :
+							 FHCI_TA_IN,
+				USB_TD_TOGGLE_DATA1, data, data_len, 0, 0,
+				true);
+		}
+		td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++,
+			usb_pipeout(urb->pipe) ? FHCI_TA_IN : FHCI_TA_OUT,
+			USB_TD_TOGGLE_DATA1, data, 0, 0, 0, true);
+		urb_state = US_CTRL_SETUP;
+		break;
+	case FHCI_TF_ISO:
+		for (cnt = 0; cnt < urb->number_of_packets; cnt++) {
+			u16 frame = urb->start_frame;
+
+			/*
+			 * FIXME scheduling should handle frame counter
+			 * roll-around ... exotic case (and OHCI has
+			 * a 2^16 iso range, vs other HCs max of 2^10)
+			 */
+			frame += cnt * urb->interval;
+			frame &= 0x07ff;
+			td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt,
+				usb_pipeout(urb->pipe) ? FHCI_TA_OUT :
+							 FHCI_TA_IN,
+				USB_TD_TOGGLE_DATA0,
+				data + urb->iso_frame_desc[cnt].offset,
+				urb->iso_frame_desc[cnt].length,
+				urb->interval, frame, true);
+		}
+		break;
+	default:
+		break;
+	}
+
+	/*
+	 * set the state of URB
+	 * control pipe:3 states -- setup,data,status
+	 * interrupt and bulk pipe:1 state -- data
+	 */
+	urb->pipe &= ~0x1f;
+	urb->pipe |= urb_state & 0x1f;
+
+	urb_priv->state = URB_INPROGRESS;
+
+	if (!ed->td_head) {
+		ed->state = FHCI_ED_OPER;
+		switch (ed->mode) {
+		case FHCI_TF_CTRL:
+			list_add(&ed->node, &fhci->hc_list->ctrl_list);
+			break;
+		case FHCI_TF_BULK:
+			list_add(&ed->node, &fhci->hc_list->bulk_list);
+			break;
+		case FHCI_TF_INTR:
+			list_add(&ed->node, &fhci->hc_list->intr_list);
+			break;
+		case FHCI_TF_ISO:
+			list_add(&ed->node, &fhci->hc_list->iso_list);
+			break;
+		default:
+			break;
+		}
+	}
+
+	fhci_add_tds_to_ed(ed, urb_priv->tds, urb_priv->num_of_tds);
+	fhci->active_urbs++;
+}
diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c
new file mode 100644
index 0000000..b403322
--- /dev/null
+++ b/drivers/usb/host/fhci-tds.c
@@ -0,0 +1,626 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/usb.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+#define DUMMY_BD_BUFFER  0xdeadbeef
+#define DUMMY2_BD_BUFFER 0xbaadf00d
+
+/* Transaction Descriptors bits */
+#define TD_R		0x8000 /* ready bit */
+#define TD_W		0x2000 /* wrap bit */
+#define TD_I		0x1000 /* interrupt on completion */
+#define TD_L		0x0800 /* last */
+#define TD_TC		0x0400 /* transmit CRC */
+#define TD_CNF		0x0200 /* CNF - Must be always 1 */
+#define TD_LSP		0x0100 /* Low-speed transaction */
+#define TD_PID		0x00c0 /* packet id */
+#define TD_RXER		0x0020 /* Rx error or not */
+
+#define TD_NAK		0x0010 /* No ack. */
+#define TD_STAL		0x0008 /* Stall recieved */
+#define TD_TO		0x0004 /* time out */
+#define TD_UN		0x0002 /* underrun */
+#define TD_NO		0x0010 /* Rx Non Octet Aligned Packet */
+#define TD_AB		0x0008 /* Frame Aborted */
+#define TD_CR		0x0004 /* CRC Error */
+#define TD_OV		0x0002 /* Overrun */
+#define TD_BOV		0x0001 /* Buffer Overrun */
+
+#define TD_ERRORS	(TD_NAK | TD_STAL | TD_TO | TD_UN | \
+			 TD_NO | TD_AB | TD_CR | TD_OV | TD_BOV)
+
+#define TD_PID_DATA0	0x0080 /* Data 0 toggle */
+#define TD_PID_DATA1	0x00c0 /* Data 1 toggle */
+#define TD_PID_TOGGLE	0x00c0 /* Data 0/1 toggle mask */
+
+#define TD_TOK_SETUP	0x0000
+#define TD_TOK_OUT	0x4000
+#define TD_TOK_IN	0x8000
+#define TD_ISO		0x1000
+#define TD_ENDP		0x0780
+#define TD_ADDR		0x007f
+
+#define TD_ENDP_SHIFT 7
+
+struct usb_td {
+	__be16 status;
+	__be16 length;
+	__be32 buf_ptr;
+	__be16 extra;
+	__be16 reserved;
+};
+
+static struct usb_td __iomem *next_bd(struct usb_td __iomem *base,
+				      struct usb_td __iomem *td,
+				      u16 status)
+{
+	if (status & TD_W)
+		return base;
+	else
+		return ++td;
+}
+
+void fhci_push_dummy_bd(struct endpoint *ep)
+{
+	if (ep->already_pushed_dummy_bd == false) {
+		u16 td_status = in_be16(&ep->empty_td->status);
+
+		out_be32(&ep->empty_td->buf_ptr, DUMMY_BD_BUFFER);
+		/* get the next TD in the ring */
+		ep->empty_td = next_bd(ep->td_base, ep->empty_td, td_status);
+		ep->already_pushed_dummy_bd = true;
+	}
+}
+
+/* destroy an USB endpoint */
+void fhci_ep0_free(struct fhci_usb *usb)
+{
+	struct endpoint *ep;
+	int size;
+
+	ep = usb->ep0;
+	if (ep) {
+		if (ep->td_base)
+			cpm_muram_free(cpm_muram_offset(ep->td_base));
+
+		if (ep->conf_frame_Q) {
+			size = cq_howmany(ep->conf_frame_Q);
+			for (; size; size--) {
+				struct packet *pkt = cq_get(ep->conf_frame_Q);
+
+				kfree(pkt);
+			}
+			cq_delete(ep->conf_frame_Q);
+		}
+
+		if (ep->empty_frame_Q) {
+			size = cq_howmany(ep->empty_frame_Q);
+			for (; size; size--) {
+				struct packet *pkt = cq_get(ep->empty_frame_Q);
+
+				kfree(pkt);
+			}
+			cq_delete(ep->empty_frame_Q);
+		}
+
+		if (ep->dummy_packets_Q) {
+			size = cq_howmany(ep->dummy_packets_Q);
+			for (; size; size--) {
+				u8 *buff = cq_get(ep->dummy_packets_Q);
+
+				kfree(buff);
+			}
+			cq_delete(ep->dummy_packets_Q);
+		}
+
+		kfree(ep);
+		usb->ep0 = NULL;
+	}
+}
+
+/*
+ * create the endpoint structure
+ *
+ * arguments:
+ * usb		A pointer to the data structure of the USB
+ * data_mem	The data memory partition(BUS)
+ * ring_len	TD ring length
+ */
+u32 fhci_create_ep(struct fhci_usb *usb, enum fhci_mem_alloc data_mem,
+			   u32 ring_len)
+{
+	struct endpoint *ep;
+	struct usb_td __iomem *td;
+	unsigned long ep_offset;
+	char *err_for = "enpoint PRAM";
+	int ep_mem_size;
+	u32 i;
+
+	/* we need at least 3 TDs in the ring */
+	if (!(ring_len > 2)) {
+		fhci_err(usb->fhci, "illegal TD ring length parameters\n");
+		return -EINVAL;
+	}
+
+	ep = kzalloc(sizeof(*ep), GFP_KERNEL);
+	if (!ep)
+		return -ENOMEM;
+
+	ep_mem_size = ring_len * sizeof(*td) + sizeof(struct fhci_ep_pram);
+	ep_offset = cpm_muram_alloc(ep_mem_size, 32);
+	if (IS_ERR_VALUE(ep_offset))
+		goto err;
+	ep->td_base = cpm_muram_addr(ep_offset);
+
+	/* zero all queue pointers */
+	ep->conf_frame_Q = cq_new(ring_len + 2);
+	ep->empty_frame_Q = cq_new(ring_len + 2);
+	ep->dummy_packets_Q = cq_new(ring_len + 2);
+	if (!ep->conf_frame_Q || !ep->empty_frame_Q || !ep->dummy_packets_Q) {
+		err_for = "frame_queues";
+		goto err;
+	}
+
+	for (i = 0; i < (ring_len + 1); i++) {
+		struct packet *pkt;
+		u8 *buff;
+
+		pkt = kmalloc(sizeof(*pkt), GFP_KERNEL);
+		if (!pkt) {
+			err_for = "frame";
+			goto err;
+		}
+
+		buff = kmalloc(1028 * sizeof(*buff), GFP_KERNEL);
+		if (!buff) {
+			kfree(pkt);
+			err_for = "buffer";
+			goto err;
+		}
+		cq_put(ep->empty_frame_Q, pkt);
+		cq_put(ep->dummy_packets_Q, buff);
+	}
+
+	/* we put the endpoint parameter RAM right behind the TD ring */
+	ep->ep_pram_ptr = (void __iomem *)ep->td_base + sizeof(*td) * ring_len;
+
+	ep->conf_td = ep->td_base;
+	ep->empty_td = ep->td_base;
+
+	ep->already_pushed_dummy_bd = false;
+
+	/* initialize tds */
+	td = ep->td_base;
+	for (i = 0; i < ring_len; i++) {
+		out_be32(&td->buf_ptr, 0);
+		out_be16(&td->status, 0);
+		out_be16(&td->length, 0);
+		out_be16(&td->extra, 0);
+		td++;
+	}
+	td--;
+	out_be16(&td->status, TD_W); /* for last TD set Wrap bit */
+	out_be16(&td->length, 0);
+
+	/* endpoint structure has been created */
+	usb->ep0 = ep;
+
+	return 0;
+err:
+	fhci_ep0_free(usb);
+	kfree(ep);
+	fhci_err(usb->fhci, "no memory for the %s\n", err_for);
+	return -ENOMEM;
+}
+
+/*
+ * initialize the endpoint register according to the given parameters
+ *
+ * artuments:
+ * usb		A pointer to the data strucutre of the USB
+ * ep		A pointer to the endpoint structre
+ * data_mem	The data memory partition(BUS)
+ */
+void fhci_init_ep_registers(struct fhci_usb *usb, struct endpoint *ep,
+			    enum fhci_mem_alloc data_mem)
+{
+	u8 rt;
+
+	/* set the endpoint registers according to the endpoint */
+	out_be16(&usb->fhci->regs->usb_ep[0],
+		 USB_TRANS_CTR | USB_EP_MF | USB_EP_RTE);
+	out_be16(&usb->fhci->pram->ep_ptr[0],
+		 cpm_muram_offset(ep->ep_pram_ptr));
+
+	rt = (BUS_MODE_BO_BE | BUS_MODE_GBL);
+#ifdef MULTI_DATA_BUS
+	if (data_mem == MEM_SECONDARY)
+		rt |= BUS_MODE_DTB;
+#endif
+	out_8(&ep->ep_pram_ptr->rx_func_code, rt);
+	out_8(&ep->ep_pram_ptr->tx_func_code, rt);
+	out_be16(&ep->ep_pram_ptr->rx_buff_len, 1028);
+	out_be16(&ep->ep_pram_ptr->rx_base, 0);
+	out_be16(&ep->ep_pram_ptr->tx_base, cpm_muram_offset(ep->td_base));
+	out_be16(&ep->ep_pram_ptr->rx_bd_ptr, 0);
+	out_be16(&ep->ep_pram_ptr->tx_bd_ptr, cpm_muram_offset(ep->td_base));
+	out_be32(&ep->ep_pram_ptr->tx_state, 0);
+}
+
+/*
+ * Collect the submitted frames and inform the application about them
+ * It is also prepearing the TDs for new frames. If the Tx interrupts
+ * are diabled, the application should call that routine to get
+ * confirmation about the submitted frames. Otherwise, the routine is
+ * called frome the interrupt service routine during the Tx interrupt.
+ * In that case the application is informed by calling the application
+ * specific 'fhci_transaction_confirm' routine
+ */
+static void fhci_td_transaction_confirm(struct fhci_usb *usb)
+{
+	struct endpoint *ep = usb->ep0;
+	struct packet *pkt;
+	struct usb_td __iomem *td;
+	u16 extra_data;
+	u16 td_status;
+	u16 td_length;
+	u32 buf;
+
+	/*
+	 * collect transmitted BDs from the chip. The routine clears all BDs
+	 * with R bit = 0 and the pointer to data buffer is not NULL, that is
+	 * BDs which point to the transmitted data buffer
+	 */
+	while (1) {
+		td = ep->conf_td;
+		td_status = in_be16(&td->status);
+		td_length = in_be16(&td->length);
+		buf = in_be32(&td->buf_ptr);
+		extra_data = in_be16(&td->extra);
+
+		/* check if the TD is empty */
+		if (!(!(td_status & TD_R) && ((td_status & ~TD_W) || buf)))
+			break;
+		/* check if it is a dummy buffer */
+		else if ((buf == DUMMY_BD_BUFFER) && !(td_status & ~TD_W))
+			break;
+
+		/* mark TD as empty */
+		clrbits16(&td->status, ~TD_W);
+		out_be16(&td->length, 0);
+		out_be32(&td->buf_ptr, 0);
+		out_be16(&td->extra, 0);
+		/* advance the TD pointer */
+		ep->conf_td = next_bd(ep->td_base, ep->conf_td, td_status);
+
+		/* check if it is a dummy buffer(type2) */
+		if ((buf == DUMMY2_BD_BUFFER) && !(td_status & ~TD_W))
+			continue;
+
+		pkt = cq_get(ep->conf_frame_Q);
+		if (!pkt)
+			fhci_err(usb->fhci, "no frame to confirm\n");
+
+		if (td_status & TD_ERRORS) {
+			if (td_status & TD_RXER) {
+				if (td_status & TD_CR)
+					pkt->status = USB_TD_RX_ER_CRC;
+				else if (td_status & TD_AB)
+					pkt->status = USB_TD_RX_ER_BITSTUFF;
+				else if (td_status & TD_OV)
+					pkt->status = USB_TD_RX_ER_OVERUN;
+				else if (td_status & TD_BOV)
+					pkt->status = USB_TD_RX_DATA_OVERUN;
+				else if (td_status & TD_NO)
+					pkt->status = USB_TD_RX_ER_NONOCT;
+				else
+					fhci_err(usb->fhci, "illegal error "
+						 "occured\n");
+			} else if (td_status & TD_NAK)
+				pkt->status = USB_TD_TX_ER_NAK;
+			else if (td_status & TD_TO)
+				pkt->status = USB_TD_TX_ER_TIMEOUT;
+			else if (td_status & TD_UN)
+				pkt->status = USB_TD_TX_ER_UNDERUN;
+			else if (td_status & TD_STAL)
+				pkt->status = USB_TD_TX_ER_STALL;
+			else
+				fhci_err(usb->fhci, "illegal error occured\n");
+		} else if ((extra_data & TD_TOK_IN) &&
+				pkt->len > td_length - CRC_SIZE) {
+			pkt->status = USB_TD_RX_DATA_UNDERUN;
+		}
+
+		if (extra_data & TD_TOK_IN)
+			pkt->len = td_length - CRC_SIZE;
+		else if (pkt->info & PKT_ZLP)
+			pkt->len = 0;
+		else
+			pkt->len = td_length;
+
+		fhci_transaction_confirm(usb, pkt);
+	}
+}
+
+/*
+ * Submitting a data frame to a specified endpoint of a USB device
+ * The frame is put in the driver's transmit queue for this endpoint
+ *
+ * Arguments:
+ * usb          A pointer to the USB structure
+ * pkt          A pointer to the user frame structure
+ * trans_type   Transaction tyep - IN,OUT or SETUP
+ * dest_addr    Device address - 0~127
+ * dest_ep      Endpoint number of the device - 0~16
+ * trans_mode   Pipe type - ISO,Interrupt,bulk or control
+ * dest_speed   USB speed - Low speed or FULL speed
+ * data_toggle  Data sequence toggle - 0 or 1
+ */
+u32 fhci_host_transaction(struct fhci_usb *usb,
+			  struct packet *pkt,
+			  enum fhci_ta_type trans_type,
+			  u8 dest_addr,
+			  u8 dest_ep,
+			  enum fhci_tf_mode trans_mode,
+			  enum fhci_speed dest_speed, u8 data_toggle)
+{
+	struct endpoint *ep = usb->ep0;
+	struct usb_td __iomem *td;
+	u16 extra_data;
+	u16 td_status;
+
+	fhci_usb_disable_interrupt(usb);
+	/* start from the next BD that should be filled */
+	td = ep->empty_td;
+	td_status = in_be16(&td->status);
+
+	if (td_status & TD_R && in_be16(&td->length)) {
+		/* if the TD is not free */
+		fhci_usb_enable_interrupt(usb);
+		return -1;
+	}
+
+	/* get the next TD in the ring */
+	ep->empty_td = next_bd(ep->td_base, ep->empty_td, td_status);
+	fhci_usb_enable_interrupt(usb);
+	pkt->priv_data = td;
+	out_be32(&td->buf_ptr, virt_to_phys(pkt->data));
+	/* sets up transaction parameters - addr,endp,dir,and type */
+	extra_data = (dest_ep << TD_ENDP_SHIFT) | dest_addr;
+	switch (trans_type) {
+	case FHCI_TA_IN:
+		extra_data |= TD_TOK_IN;
+		break;
+	case FHCI_TA_OUT:
+		extra_data |= TD_TOK_OUT;
+		break;
+	case FHCI_TA_SETUP:
+		extra_data |= TD_TOK_SETUP;
+		break;
+	}
+	if (trans_mode == FHCI_TF_ISO)
+		extra_data |= TD_ISO;
+	out_be16(&td->extra, extra_data);
+
+	/* sets up the buffer descriptor */
+	td_status = ((td_status & TD_W) | TD_R | TD_L | TD_I | TD_CNF);
+	if (!(pkt->info & PKT_NO_CRC))
+		td_status |= TD_TC;
+
+	switch (trans_type) {
+	case FHCI_TA_IN:
+		if (data_toggle)
+			pkt->info |= PKT_PID_DATA1;
+		else
+			pkt->info |= PKT_PID_DATA0;
+		break;
+	default:
+		if (data_toggle) {
+			td_status |= TD_PID_DATA1;
+			pkt->info |= PKT_PID_DATA1;
+		} else {
+			td_status |= TD_PID_DATA0;
+			pkt->info |= PKT_PID_DATA0;
+		}
+		break;
+	}
+
+	if ((dest_speed == FHCI_LOW_SPEED) &&
+	    (usb->port_status == FHCI_PORT_FULL))
+		td_status |= TD_LSP;
+
+	out_be16(&td->status, td_status);
+
+	/* set up buffer length */
+	if (trans_type == FHCI_TA_IN)
+		out_be16(&td->length, pkt->len + CRC_SIZE);
+	else
+		out_be16(&td->length, pkt->len);
+
+	/* put the frame to the confirmation queue */
+	cq_put(ep->conf_frame_Q, pkt);
+
+	if (cq_howmany(ep->conf_frame_Q) == 1)
+		out_8(&usb->fhci->regs->usb_comm, USB_CMD_STR_FIFO);
+
+	return 0;
+}
+
+/* Reset the Tx BD ring */
+void fhci_flush_bds(struct fhci_usb *usb)
+{
+	u16 extra_data;
+	u16 td_status;
+	u32 buf;
+	struct usb_td __iomem *td;
+	struct endpoint *ep = usb->ep0;
+
+	td = ep->td_base;
+	while (1) {
+		td_status = in_be16(&td->status);
+		buf = in_be32(&td->buf_ptr);
+		extra_data = in_be16(&td->extra);
+
+		/* if the TD is not empty - we'll confirm it as Timeout */
+		if (td_status & TD_R)
+			out_be16(&td->status, (td_status & ~TD_R) | TD_TO);
+		/* if this TD is dummy - let's skip this TD */
+		else if (in_be32(&td->buf_ptr) == DUMMY_BD_BUFFER)
+			out_be32(&td->buf_ptr, DUMMY2_BD_BUFFER);
+		/* if this is the last TD - break */
+		if (td_status & TD_W)
+			break;
+
+		td++;
+	}
+
+	fhci_td_transaction_confirm(usb);
+
+	td = ep->td_base;
+	do {
+		out_be16(&td->status, 0);
+		out_be16(&td->length, 0);
+		out_be32(&td->buf_ptr, 0);
+		out_be16(&td->extra, 0);
+		td++;
+	} while (!(in_be16(&td->status) & TD_W));
+	out_be16(&td->status, TD_W); /* for last TD set Wrap bit */
+	out_be16(&td->length, 0);
+	out_be32(&td->buf_ptr, 0);
+	out_be16(&td->extra, 0);
+
+	out_be16(&ep->ep_pram_ptr->tx_bd_ptr,
+		 in_be16(&ep->ep_pram_ptr->tx_base));
+	out_be32(&ep->ep_pram_ptr->tx_state, 0);
+	out_be16(&ep->ep_pram_ptr->tx_cnt, 0);
+	ep->empty_td = ep->td_base;
+	ep->conf_td = ep->td_base;
+}
+
+/*
+ * Flush all transmitted packets from TDs in the actual frame.
+ * This routine is called when something wrong with the controller and
+ * we want to get rid of the actual frame and start again next frame
+ */
+void fhci_flush_actual_frame(struct fhci_usb *usb)
+{
+	u8 mode;
+	u16 tb_ptr;
+	u16 extra_data;
+	u16 td_status;
+	u32 buf_ptr;
+	struct usb_td __iomem *td;
+	struct endpoint *ep = usb->ep0;
+
+	/* disable the USB controller */
+	mode = in_8(&usb->fhci->regs->usb_mod);
+	out_8(&usb->fhci->regs->usb_mod, mode & ~USB_MODE_EN);
+
+	tb_ptr = in_be16(&ep->ep_pram_ptr->tx_bd_ptr);
+	td = cpm_muram_addr(tb_ptr);
+	td_status = in_be16(&td->status);
+	buf_ptr = in_be32(&td->buf_ptr);
+	extra_data = in_be16(&td->extra);
+	do {
+		if (td_status & TD_R) {
+			out_be16(&td->status, (td_status & ~TD_R) | TD_TO);
+		} else {
+			out_be32(&td->buf_ptr, 0);
+			ep->already_pushed_dummy_bd = false;
+			break;
+		}
+
+		/* advance the TD pointer */
+		td = next_bd(ep->td_base, td, td_status);
+		td_status = in_be16(&td->status);
+		buf_ptr = in_be32(&td->buf_ptr);
+		extra_data = in_be16(&td->extra);
+	} while ((td_status & TD_R) || buf_ptr);
+
+	fhci_td_transaction_confirm(usb);
+
+	out_be16(&ep->ep_pram_ptr->tx_bd_ptr,
+		 in_be16(&ep->ep_pram_ptr->tx_base));
+	out_be32(&ep->ep_pram_ptr->tx_state, 0);
+	out_be16(&ep->ep_pram_ptr->tx_cnt, 0);
+	ep->empty_td = ep->td_base;
+	ep->conf_td = ep->td_base;
+
+	usb->actual_frame->frame_status = FRAME_TIMER_END_TRANSMISSION;
+
+	/* reset the event register */
+	out_be16(&usb->fhci->regs->usb_event, 0xffff);
+	/* enable the USB controller */
+	out_8(&usb->fhci->regs->usb_mod, mode | USB_MODE_EN);
+}
+
+/* handles Tx confirm and Tx error interrupt */
+void fhci_tx_conf_interrupt(struct fhci_usb *usb)
+{
+	fhci_td_transaction_confirm(usb);
+
+	/*
+	 * Schedule another transaction to this frame only if we have
+	 * already confirmed all transaction in the frame.
+	 */
+	if (((fhci_get_sof_timer_count(usb) < usb->max_frame_usage) ||
+	     (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION)) &&
+	    (list_empty(&usb->actual_frame->tds_list)))
+		fhci_schedule_transactions(usb);
+}
+
+void fhci_host_transmit_actual_frame(struct fhci_usb *usb)
+{
+	u16 tb_ptr;
+	u16 td_status;
+	struct usb_td __iomem *td;
+	struct endpoint *ep = usb->ep0;
+
+	tb_ptr = in_be16(&ep->ep_pram_ptr->tx_bd_ptr);
+	td = cpm_muram_addr(tb_ptr);
+
+	if (in_be32(&td->buf_ptr) == DUMMY_BD_BUFFER) {
+		struct usb_td __iomem *old_td = td;
+
+		ep->already_pushed_dummy_bd = false;
+		td_status = in_be16(&td->status);
+		/* gets the next TD in the ring */
+		td = next_bd(ep->td_base, td, td_status);
+		tb_ptr = cpm_muram_offset(td);
+		out_be16(&ep->ep_pram_ptr->tx_bd_ptr, tb_ptr);
+
+		/* start transmit only if we have something in the TDs */
+		if (in_be16(&td->status) & TD_R)
+			out_8(&usb->fhci->regs->usb_comm, USB_CMD_STR_FIFO);
+
+		if (in_be32(&ep->conf_td->buf_ptr) == DUMMY_BD_BUFFER) {
+			out_be32(&old_td->buf_ptr, 0);
+			ep->conf_td = next_bd(ep->td_base, ep->conf_td,
+					      td_status);
+		} else {
+			out_be32(&old_td->buf_ptr, DUMMY2_BD_BUFFER);
+		}
+	}
+}
diff --git a/drivers/usb/host/fhci.h b/drivers/usb/host/fhci.h
new file mode 100644
index 0000000..7116284
--- /dev/null
+++ b/drivers/usb/host/fhci.h
@@ -0,0 +1,607 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __FHCI_H
+#define __FHCI_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/kfifo.h>
+#include <linux/io.h>
+#include <linux/usb.h>
+#include <asm/qe.h>
+#include "../core/hcd.h"
+
+#define USB_CLOCK	48000000
+
+#define FHCI_PRAM_SIZE 0x100
+
+#define MAX_EDS		32
+#define MAX_TDS		32
+
+
+/* CRC16 field size */
+#define CRC_SIZE 2
+
+/* USB protocol overhead for each frame transmitted from the host */
+#define PROTOCOL_OVERHEAD 7
+
+/* Packet structure, info field */
+#define PKT_PID_DATA0		0x80000000 /* PID - Data toggle zero */
+#define PKT_PID_DATA1		0x40000000 /* PID - Data toggle one  */
+#define PKT_PID_SETUP		0x20000000 /* PID - Setup bit */
+#define PKT_SETUP_STATUS	0x10000000 /* Setup status bit */
+#define PKT_SETADDR_STATUS	0x08000000 /* Set address status bit */
+#define PKT_SET_HOST_LAST	0x04000000 /* Last data packet */
+#define PKT_HOST_DATA		0x02000000 /* Data packet */
+#define PKT_FIRST_IN_FRAME	0x01000000 /* First packet in the frame */
+#define PKT_TOKEN_FRAME		0x00800000 /* Token packet */
+#define PKT_ZLP			0x00400000 /* Zero length packet */
+#define PKT_IN_TOKEN_FRAME	0x00200000 /* IN token packet */
+#define PKT_OUT_TOKEN_FRAME	0x00100000 /* OUT token packet */
+#define PKT_SETUP_TOKEN_FRAME	0x00080000 /* SETUP token packet */
+#define PKT_STALL_FRAME		0x00040000 /* STALL packet */
+#define PKT_NACK_FRAME		0x00020000 /* NACK packet */
+#define PKT_NO_PID		0x00010000 /* No PID */
+#define PKT_NO_CRC		0x00008000 /* don't append CRC */
+#define PKT_HOST_COMMAND	0x00004000 /* Host command packet */
+#define PKT_DUMMY_PACKET	0x00002000 /* Dummy packet, used for mmm */
+#define PKT_LOW_SPEED_PACKET	0x00001000 /* Low-Speed packet */
+
+#define TRANS_OK		(0)
+#define TRANS_INPROGRESS	(-1)
+#define TRANS_DISCARD		(-2)
+#define TRANS_FAIL		(-3)
+
+#define PS_INT		0
+#define PS_DISCONNECTED	1
+#define PS_CONNECTED	2
+#define PS_READY	3
+#define PS_MISSING	4
+
+/* Transfer Descriptor status field */
+#define USB_TD_OK		0x00000000 /* TD transmited or received ok */
+#define USB_TD_INPROGRESS	0x80000000 /* TD is being transmitted */
+#define USB_TD_RX_ER_NONOCT	0x40000000 /* Tx Non Octet Aligned Packet */
+#define USB_TD_RX_ER_BITSTUFF	0x20000000 /* Frame Aborted-Received pkt */
+#define USB_TD_RX_ER_CRC	0x10000000 /* CRC error */
+#define USB_TD_RX_ER_OVERUN	0x08000000 /* Over - run occured */
+#define USB_TD_RX_ER_PID	0x04000000 /* wrong PID received */
+#define USB_TD_RX_DATA_UNDERUN	0x02000000 /* shorter than expected */
+#define USB_TD_RX_DATA_OVERUN	0x01000000 /* longer than expected */
+#define USB_TD_TX_ER_NAK	0x00800000 /* NAK handshake */
+#define USB_TD_TX_ER_STALL	0x00400000 /* STALL handshake */
+#define USB_TD_TX_ER_TIMEOUT	0x00200000 /* transmit time out */
+#define USB_TD_TX_ER_UNDERUN	0x00100000 /* transmit underrun */
+
+#define USB_TD_ERROR (USB_TD_RX_ER_NONOCT | USB_TD_RX_ER_BITSTUFF | \
+		USB_TD_RX_ER_CRC | USB_TD_RX_ER_OVERUN | USB_TD_RX_ER_PID | \
+		USB_TD_RX_DATA_UNDERUN | USB_TD_RX_DATA_OVERUN | \
+		USB_TD_TX_ER_NAK | USB_TD_TX_ER_STALL | \
+		USB_TD_TX_ER_TIMEOUT | USB_TD_TX_ER_UNDERUN)
+
+/* Transfer Descriptor toggle field */
+#define USB_TD_TOGGLE_DATA0	0
+#define USB_TD_TOGGLE_DATA1	1
+#define USB_TD_TOGGLE_CARRY	2
+
+/* #define MULTI_DATA_BUS */
+
+/* Bus mode register RBMR/TBMR */
+#define BUS_MODE_GBL	0x20	/* Global snooping */
+#define BUS_MODE_BO	0x18	/* Byte ordering */
+#define BUS_MODE_BO_BE	0x10	/* Byte ordering - Big-endian */
+#define BUS_MODE_DTB	0x02	/* Data bus */
+
+/* FHCI QE USB Register Description */
+
+/* USB Mode Register bit define */
+#define USB_MODE_EN		0x01
+#define USB_MODE_HOST		0x02
+#define USB_MODE_TEST		0x04
+#define USB_MODE_SFTE		0x08
+#define USB_MODE_RESUME		0x40
+#define USB_MODE_LSS		0x80
+
+/* USB Slave Address Register Mask */
+#define USB_SLVADDR_MASK	0x7F
+
+/* USB Endpoint register define */
+#define USB_EPNUM_MASK		0xF000
+#define USB_EPNUM_SHIFT		12
+
+#define USB_TRANS_MODE_SHIFT	8
+#define USB_TRANS_CTR		0x0000
+#define USB_TRANS_INT		0x0100
+#define USB_TRANS_BULK		0x0200
+#define USB_TRANS_ISO		0x0300
+
+#define USB_EP_MF		0x0020
+#define USB_EP_RTE		0x0010
+
+#define USB_THS_SHIFT		2
+#define USB_THS_MASK		0x000c
+#define USB_THS_NORMAL		0x0
+#define USB_THS_IGNORE_IN	0x0004
+#define USB_THS_NACK		0x0008
+#define USB_THS_STALL		0x000c
+
+#define USB_RHS_SHIFT   	0
+#define USB_RHS_MASK		0x0003
+#define USB_RHS_NORMAL  	0x0
+#define USB_RHS_IGNORE_OUT	0x0001
+#define USB_RHS_NACK		0x0002
+#define USB_RHS_STALL		0x0003
+
+#define USB_RTHS_MASK		0x000f
+
+/* USB Command Register define */
+#define USB_CMD_STR_FIFO	0x80
+#define USB_CMD_FLUSH_FIFO	0x40
+#define USB_CMD_ISFT		0x20
+#define USB_CMD_DSFT		0x10
+#define USB_CMD_EP_MASK		0x03
+
+/* USB Event and Mask Register define */
+#define USB_E_MSF_MASK		0x0800
+#define USB_E_SFT_MASK		0x0400
+#define USB_E_RESET_MASK	0x0200
+#define USB_E_IDLE_MASK		0x0100
+#define USB_E_TXE4_MASK		0x0080
+#define USB_E_TXE3_MASK		0x0040
+#define USB_E_TXE2_MASK		0x0020
+#define USB_E_TXE1_MASK		0x0010
+#define USB_E_SOF_MASK		0x0008
+#define USB_E_BSY_MASK		0x0004
+#define USB_E_TXB_MASK		0x0002
+#define USB_E_RXB_MASK		0x0001
+
+/* Freescale USB Host controller registers */
+struct fhci_regs {
+	u8 usb_mod;		/* mode register */
+	u8 usb_addr;		/* address register */
+	u8 usb_comm;		/* command register */
+	u8 reserved1[1];
+	__be16 usb_ep[4];	/* endpoint register */
+	u8 reserved2[4];
+	__be16 usb_event;	/* event register */
+	u8 reserved3[2];
+	__be16 usb_mask;	/* mask register */
+	u8 reserved4[1];
+	u8 usb_status;		/* status register */
+	__be16 usb_sof_tmr;	/* Start Of Frame timer */
+	u8 reserved5[2];
+	__be16 usb_frame_num;	/* frame number register */
+	u8 reserved6[1];
+};
+
+/* Freescale USB HOST */
+struct fhci_pram {
+	__be16 ep_ptr[4];	/* Endpoint porter reg */
+	__be32 rx_state;	/* Rx internal state */
+	__be32 rx_ptr;		/* Rx internal data pointer */
+	__be16 frame_num;	/* Frame number */
+	__be16 rx_cnt;		/* Rx byte count */
+	__be32 rx_temp;		/* Rx temp */
+	__be32 rx_data_temp;	/* Rx data temp */
+	__be16 rx_u_ptr;	/* Rx microcode return address temp */
+	u8 reserved1[2];	/* reserved area */
+	__be32 sof_tbl;		/* SOF lookup table pointer */
+	u8 sof_u_crc_temp;	/* SOF micorcode CRC5 temp reg */
+	u8 reserved2[0xdb];
+};
+
+/* Freescale USB Endpoint*/
+struct fhci_ep_pram {
+	__be16 rx_base;		/* Rx BD base address */
+	__be16 tx_base;		/* Tx BD base address */
+	u8 rx_func_code;	/* Rx function code */
+	u8 tx_func_code;	/* Tx function code */
+	__be16 rx_buff_len;	/* Rx buffer length */
+	__be16 rx_bd_ptr;	/* Rx BD pointer */
+	__be16 tx_bd_ptr;	/* Tx BD pointer */
+	__be32 tx_state;	/* Tx internal state */
+	__be32 tx_ptr;		/* Tx internal data pointer */
+	__be16 tx_crc;		/* temp transmit CRC */
+	__be16 tx_cnt;		/* Tx byte count */
+	__be32 tx_temp;		/* Tx temp */
+	__be16 tx_u_ptr;	/* Tx microcode return address temp */
+	__be16 reserved;
+};
+
+struct fhci_controller_list {
+	struct list_head ctrl_list;	/* control endpoints */
+	struct list_head bulk_list;	/* bulk endpoints */
+	struct list_head iso_list;	/* isochronous endpoints */
+	struct list_head intr_list;	/* interruput endpoints */
+	struct list_head done_list;	/* done transfers */
+};
+
+struct virtual_root_hub {
+	int dev_num;	/* USB address of the root hub */
+	u32 feature;	/* indicates what feature has been set */
+	struct usb_hub_status hub;
+	struct usb_port_status port;
+};
+
+enum fhci_gpios {
+	GPIO_USBOE = 0,
+	GPIO_USBTP,
+	GPIO_USBTN,
+	GPIO_USBRP,
+	GPIO_USBRN,
+	/* these are optional */
+	GPIO_SPEED,
+	GPIO_POWER,
+	NUM_GPIOS,
+};
+
+enum fhci_pins {
+	PIN_USBOE = 0,
+	PIN_USBTP,
+	PIN_USBTN,
+	NUM_PINS,
+};
+
+struct fhci_hcd {
+	enum qe_clock fullspeed_clk;
+	enum qe_clock lowspeed_clk;
+	struct qe_pin *pins[NUM_PINS];
+	int gpios[NUM_GPIOS];
+	bool alow_gpios[NUM_GPIOS];
+
+	struct fhci_regs __iomem *regs;	/* I/O memory used to communicate */
+	struct fhci_pram __iomem *pram;	/* Parameter RAM */
+	struct gtm_timer *timer;
+
+	spinlock_t lock;
+	struct fhci_usb *usb_lld; /* Low-level driver */
+	struct virtual_root_hub *vroot_hub; /* the virtual root hub */
+	int active_urbs;
+	struct fhci_controller_list *hc_list;
+	struct tasklet_struct *process_done_task; /* tasklet for done list */
+
+	struct list_head empty_eds;
+	struct list_head empty_tds;
+
+#ifdef CONFIG_FHCI_DEBUG
+	int usb_irq_stat[13];
+	struct dentry *dfs_root;
+	struct dentry *dfs_regs;
+	struct dentry *dfs_irq_stat;
+#endif
+};
+
+#define USB_FRAME_USAGE 90
+#define FRAME_TIME_USAGE (USB_FRAME_USAGE*10)	/* frame time usage */
+#define SW_FIX_TIME_BETWEEN_TRANSACTION 150	/* SW */
+#define MAX_BYTES_PER_FRAME (USB_FRAME_USAGE*15)
+#define MAX_PERIODIC_FRAME_USAGE 90
+
+/* transaction type */
+enum fhci_ta_type {
+	FHCI_TA_IN = 0,	/* input transaction */
+	FHCI_TA_OUT,	/* output transaction */
+	FHCI_TA_SETUP,	/* setup transaction */
+};
+
+/* transfer mode */
+enum fhci_tf_mode {
+	FHCI_TF_CTRL = 0,
+	FHCI_TF_ISO,
+	FHCI_TF_BULK,
+	FHCI_TF_INTR,
+};
+
+enum fhci_speed {
+	FHCI_FULL_SPEED,
+	FHCI_LOW_SPEED,
+};
+
+/* endpoint state */
+enum fhci_ed_state {
+	FHCI_ED_NEW = 0, /* pipe is new */
+	FHCI_ED_OPER,    /* pipe is operating */
+	FHCI_ED_URB_DEL, /* pipe is in hold because urb is being deleted */
+	FHCI_ED_SKIP,    /* skip this pipe */
+	FHCI_ED_HALTED,  /* pipe is halted */
+};
+
+enum fhci_port_status {
+	FHCI_PORT_POWER_OFF = 0,
+	FHCI_PORT_DISABLED,
+	FHCI_PORT_DISCONNECTING,
+	FHCI_PORT_WAITING,	/* waiting for connection */
+	FHCI_PORT_FULL,		/* full speed connected */
+	FHCI_PORT_LOW,		/* low speed connected */
+};
+
+enum fhci_mem_alloc {
+	MEM_CACHABLE_SYS = 0x00000001,	/* primary DDR,cachable */
+	MEM_NOCACHE_SYS = 0x00000004,	/* primary DDR,non-cachable */
+	MEM_SECONDARY = 0x00000002,	/* either secondary DDR or SDRAM */
+	MEM_PRAM = 0x00000008,		/* multi-user RAM identifier */
+};
+
+/* USB default parameters*/
+#define DEFAULT_RING_LEN	8
+#define DEFAULT_DATA_MEM	MEM_CACHABLE_SYS
+
+struct ed {
+	u8 dev_addr;		/* device address */
+	u8 ep_addr;		/* endpoint address */
+	enum fhci_tf_mode mode;	/* USB transfer mode */
+	enum fhci_speed speed;
+	unsigned int max_pkt_size;
+	enum fhci_ed_state state;
+	struct list_head td_list; /* a list of all queued TD to this pipe */
+	struct list_head node;
+
+	/* read only parameters, should be cleared upon initialization */
+	u8 toggle_carry;	/* toggle carry from the last TD submitted */
+	u32 last_iso;		/* time stamp of last queued ISO transfer */
+	struct td *td_head;	/* a pointer to the current TD handled */
+};
+
+struct td {
+	void *data;		 /* a pointer to the data buffer */
+	unsigned int len;	 /* length of the data to be submitted */
+	unsigned int actual_len; /* actual bytes transfered on this td */
+	enum fhci_ta_type type;	 /* transaction type */
+	u8 toggle;		 /* toggle for next trans. within this TD */
+	u16 iso_index;		 /* ISO transaction index */
+	u16 start_frame;	 /* start frame time stamp */
+	u16 interval;		 /* interval between trans. (for ISO/Intr) */
+	u32 status;		 /* status of the TD */
+	struct ed *ed;		 /* a handle to the corresponding ED */
+	struct urb *urb;	 /* a handle to the corresponding URB */
+	bool ioc;		 /* Inform On Completion */
+	struct list_head node;
+
+	/* read only parameters should be cleared upon initialization */
+	struct packet *pkt;
+	int nak_cnt;
+	int error_cnt;
+	struct list_head frame_lh;
+};
+
+struct packet {
+	u8 *data;	/* packet data */
+	u32 len;	/* packet length */
+	u32 status;	/* status of the packet - equivalent to the status
+			 * field for the corresponding structure td */
+	u32 info;	/* packet information */
+	void __iomem *priv_data; /* private data of the driver (TDs or BDs) */
+};
+
+/* struct for each URB */
+#define URB_INPROGRESS	0
+#define URB_DEL		1
+
+/* URB states (state field) */
+#define US_BULK		0
+#define US_BULK0	1
+
+/* three setup states */
+#define US_CTRL_SETUP	2
+#define US_CTRL_DATA	1
+#define US_CTRL_ACK	0
+
+#define EP_ZERO	0
+
+struct urb_priv {
+	int num_of_tds;
+	int tds_cnt;
+	int state;
+
+	struct td **tds;
+	struct ed *ed;
+	struct timer_list time_out;
+};
+
+struct endpoint {
+	/* Pointer to ep parameter RAM */
+	struct fhci_ep_pram __iomem *ep_pram_ptr;
+
+	/* Host transactions */
+	struct usb_td __iomem *td_base; /* first TD in the ring */
+	struct usb_td __iomem *conf_td; /* next TD for confirm after transac */
+	struct usb_td __iomem *empty_td;/* next TD for new transaction req. */
+	struct kfifo *empty_frame_Q;  /* Empty frames list to use */
+	struct kfifo *conf_frame_Q;   /* frames passed to TDs,waiting for tx */
+	struct kfifo *dummy_packets_Q;/* dummy packets for the CRC overun */
+
+	bool already_pushed_dummy_bd;
+};
+
+/* struct for each 1mSec frame time */
+#define FRAME_IS_TRANSMITTED		0x00
+#define FRAME_TIMER_END_TRANSMISSION	0x01
+#define FRAME_DATA_END_TRANSMISSION	0x02
+#define FRAME_END_TRANSMISSION		0x03
+#define FRAME_IS_PREPARED		0x04
+
+struct fhci_time_frame {
+	u16 frame_num;	 /* frame number */
+	u16 total_bytes; /* total bytes submitted within this frame */
+	u8 frame_status; /* flag that indicates to stop fill this frame */
+	struct list_head tds_list; /* all tds of this frame */
+};
+
+/* internal driver structure*/
+struct fhci_usb {
+	u16 saved_msk;		 /* saving of the USB mask register */
+	struct endpoint *ep0;	 /* pointer for endpoint0 structure */
+	int intr_nesting_cnt;	 /* interrupt nesting counter */
+	u16 max_frame_usage;	 /* max frame time usage,in micro-sec */
+	u16 max_bytes_per_frame; /* max byte can be tx in one time frame */
+	u32 sw_transaction_time; /* sw complete trans time,in micro-sec */
+	struct fhci_time_frame *actual_frame;
+	struct fhci_controller_list *hc_list;	/* main structure for hc */
+	struct virtual_root_hub *vroot_hub;
+	enum fhci_port_status port_status;	/* v_rh port status */
+
+	u32 (*transfer_confirm)(struct fhci_hcd *fhci);
+
+	struct fhci_hcd *fhci;
+};
+
+/*
+ * Various helpers and prototypes below.
+ */
+
+static inline u16 get_frame_num(struct fhci_hcd *fhci)
+{
+	return in_be16(&fhci->pram->frame_num) & 0x07ff;
+}
+
+#define fhci_dbg(fhci, fmt, args...) \
+		dev_dbg(fhci_to_hcd(fhci)->self.controller, fmt, ##args)
+#define fhci_vdbg(fhci, fmt, args...) \
+		dev_vdbg(fhci_to_hcd(fhci)->self.controller, fmt, ##args)
+#define fhci_err(fhci, fmt, args...) \
+		dev_err(fhci_to_hcd(fhci)->self.controller, fmt, ##args)
+#define fhci_info(fhci, fmt, args...) \
+		dev_info(fhci_to_hcd(fhci)->self.controller, fmt, ##args)
+#define fhci_warn(fhci, fmt, args...) \
+		dev_warn(fhci_to_hcd(fhci)->self.controller, fmt, ##args)
+
+static inline struct fhci_hcd *hcd_to_fhci(struct usb_hcd *hcd)
+{
+	return (struct fhci_hcd *)hcd->hcd_priv;
+}
+
+static inline struct usb_hcd *fhci_to_hcd(struct fhci_hcd *fhci)
+{
+	return container_of((void *)fhci, struct usb_hcd, hcd_priv);
+}
+
+/* fifo of pointers */
+static inline struct kfifo *cq_new(int size)
+{
+	return kfifo_alloc(size * sizeof(void *), GFP_KERNEL, NULL);
+}
+
+static inline void cq_delete(struct kfifo *kfifo)
+{
+	kfifo_free(kfifo);
+}
+
+static inline unsigned int cq_howmany(struct kfifo *kfifo)
+{
+	return __kfifo_len(kfifo) / sizeof(void *);
+}
+
+static inline int cq_put(struct kfifo *kfifo, void *p)
+{
+	return __kfifo_put(kfifo, (void *)&p, sizeof(p));
+}
+
+static inline void *cq_get(struct kfifo *kfifo)
+{
+	void *p = NULL;
+
+	__kfifo_get(kfifo, (void *)&p, sizeof(p));
+	return p;
+}
+
+/* fhci-hcd.c */
+void fhci_start_sof_timer(struct fhci_hcd *fhci);
+void fhci_stop_sof_timer(struct fhci_hcd *fhci);
+u16 fhci_get_sof_timer_count(struct fhci_usb *usb);
+void fhci_usb_enable_interrupt(struct fhci_usb *usb);
+void fhci_usb_disable_interrupt(struct fhci_usb *usb);
+int fhci_ioports_check_bus_state(struct fhci_hcd *fhci);
+
+/* fhci-mem.c */
+void fhci_recycle_empty_td(struct fhci_hcd *fhci, struct td *td);
+void fhci_recycle_empty_ed(struct fhci_hcd *fhci, struct ed *ed);
+struct ed *fhci_get_empty_ed(struct fhci_hcd *fhci);
+struct td *fhci_td_fill(struct fhci_hcd *fhci, struct urb *urb,
+			struct urb_priv *urb_priv, struct ed *ed, u16 index,
+			enum fhci_ta_type type, int toggle, u8 *data, u32 len,
+			u16 interval, u16 start_frame, bool ioc);
+void fhci_add_tds_to_ed(struct ed *ed, struct td **td_list, int number);
+
+/* fhci-hub.c */
+void fhci_config_transceiver(struct fhci_hcd *fhci,
+			enum fhci_port_status status);
+void fhci_port_disable(struct fhci_hcd *fhci);
+void fhci_port_enable(void *lld);
+void fhci_io_port_generate_reset(struct fhci_hcd *fhci);
+void fhci_port_reset(void *lld);
+int fhci_hub_status_data(struct usb_hcd *hcd, char *buf);
+int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+		     u16 wIndex, char *buf, u16 wLength);
+
+/* fhci-tds.c */
+void fhci_flush_bds(struct fhci_usb *usb);
+void fhci_flush_actual_frame(struct fhci_usb *usb);
+u32 fhci_host_transaction(struct fhci_usb *usb, struct packet *pkt,
+			  enum fhci_ta_type trans_type, u8 dest_addr,
+			  u8 dest_ep, enum fhci_tf_mode trans_mode,
+			  enum fhci_speed dest_speed, u8 data_toggle);
+void fhci_host_transmit_actual_frame(struct fhci_usb *usb);
+void fhci_tx_conf_interrupt(struct fhci_usb *usb);
+void fhci_push_dummy_bd(struct endpoint *ep);
+u32 fhci_create_ep(struct fhci_usb *usb, enum fhci_mem_alloc data_mem,
+		   u32 ring_len);
+void fhci_init_ep_registers(struct fhci_usb *usb,
+			    struct endpoint *ep,
+			    enum fhci_mem_alloc data_mem);
+void fhci_ep0_free(struct fhci_usb *usb);
+
+/* fhci-sched.c */
+extern struct tasklet_struct fhci_tasklet;
+void fhci_transaction_confirm(struct fhci_usb *usb, struct packet *pkt);
+void fhci_flush_all_transmissions(struct fhci_usb *usb);
+void fhci_schedule_transactions(struct fhci_usb *usb);
+void fhci_device_connected_interrupt(struct fhci_hcd *fhci);
+void fhci_device_disconnected_interrupt(struct fhci_hcd *fhci);
+void fhci_queue_urb(struct fhci_hcd *fhci, struct urb *urb);
+u32 fhci_transfer_confirm_callback(struct fhci_hcd *fhci);
+irqreturn_t fhci_irq(struct usb_hcd *hcd);
+irqreturn_t fhci_frame_limit_timer_irq(int irq, void *_hcd);
+
+/* fhci-q.h */
+void fhci_urb_complete_free(struct fhci_hcd *fhci, struct urb *urb);
+struct td *fhci_remove_td_from_ed(struct ed *ed);
+struct td *fhci_remove_td_from_frame(struct fhci_time_frame *frame);
+void fhci_move_td_from_ed_to_done_list(struct fhci_usb *usb, struct ed *ed);
+struct td *fhci_peek_td_from_frame(struct fhci_time_frame *frame);
+void fhci_add_td_to_frame(struct fhci_time_frame *frame, struct td *td);
+struct td *fhci_remove_td_from_done_list(struct fhci_controller_list *p_list);
+void fhci_done_td(struct urb *urb, struct td *td);
+void fhci_del_ed_list(struct fhci_hcd *fhci, struct ed *ed);
+
+#ifdef CONFIG_FHCI_DEBUG
+
+void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er);
+void fhci_dfs_destroy(struct fhci_hcd *fhci);
+void fhci_dfs_create(struct fhci_hcd *fhci);
+
+#else
+
+static inline void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er) {}
+static inline void fhci_dfs_destroy(struct fhci_hcd *fhci) {}
+static inline void fhci_dfs_create(struct fhci_hcd *fhci) {}
+
+#endif /* CONFIG_FHCI_DEBUG */
+
+#endif /* __FHCI_H */
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 65a9609..5cf5f1e 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -593,12 +593,10 @@
 	 * to be checked in case boot firmware (BIOS/SMM/...) has set up
 	 * wakeup in a way the bus isn't aware of (e.g., legacy PCI PM).
 	 * If the bus glue detected wakeup capability then it should
-	 * already be enabled.  Either way, if wakeup should be enabled
-	 * but isn't, we'll enable it now.
+	 * already be enabled; if so we'll just enable it again.
 	 */
-	if ((ohci->hc_control & OHCI_CTRL_RWC) != 0
-			&& !device_can_wakeup(hcd->self.controller))
-		device_init_wakeup(hcd->self.controller, 1);
+	if ((ohci->hc_control & OHCI_CTRL_RWC) != 0)
+		device_set_wakeup_capable(hcd->self.controller, 1);
 
 	switch (ohci->hc_control & OHCI_CTRL_HCFS) {
 	case OHCI_USB_OPER:
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 4bbddb7..f3aaba3 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -315,14 +315,14 @@
 		return -ENODEV;
 	}
 
-	usb_host_ck = clk_get(0, "usb_hhc_ck");
+	usb_host_ck = clk_get(&pdev->dev, "usb_hhc_ck");
 	if (IS_ERR(usb_host_ck))
 		return PTR_ERR(usb_host_ck);
 
 	if (!cpu_is_omap15xx())
-		usb_dc_ck = clk_get(0, "usb_dc_ck");
+		usb_dc_ck = clk_get(&pdev->dev, "usb_dc_ck");
 	else
-		usb_dc_ck = clk_get(0, "lb_ck");
+		usb_dc_ck = clk_get(&pdev->dev, "lb_ck");
 
 	if (IS_ERR(usb_dc_ck)) {
 		clk_put(usb_host_ck);
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 8b28ae7..5d625c3 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -487,7 +487,6 @@
 
 #ifdef	CONFIG_PM
 	.suspend =	usb_hcd_pci_suspend,
-	.suspend_late =	usb_hcd_pci_suspend_late,
 	.resume_early =	usb_hcd_pci_resume_early,
 	.resume =	usb_hcd_pci_resume,
 #endif
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 4e22106..944f7e0 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -942,7 +942,6 @@
 
 #ifdef	CONFIG_PM
 	.suspend =	usb_hcd_pci_suspend,
-	.suspend_late =	usb_hcd_pci_suspend_late,
 	.resume_early =	usb_hcd_pci_resume_early,
 	.resume =	usb_hcd_pci_resume,
 #endif	/* PM */
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index 189a9db..ad4fb15 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -57,7 +57,6 @@
 #define USB_DEVICE_ID_LD_MACHINETEST	0x2040	/* USB Product ID of Machine Test System */
 
 #define USB_VENDOR_ID_VERNIER		0x08f7
-#define USB_DEVICE_ID_VERNIER_LABPRO	0x0001
 #define USB_DEVICE_ID_VERNIER_GOTEMP	0x0002
 #define USB_DEVICE_ID_VERNIER_SKIP	0x0003
 #define USB_DEVICE_ID_VERNIER_CYCLOPS	0x0004
@@ -85,7 +84,6 @@
 	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_NETWORKANALYSER) },
 	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POWERCONTROL) },
 	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MACHINETEST) },
-	{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO) },
 	{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) },
 	{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) },
 	{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS) },
diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c
index e06810a..4cf27c7 100644
--- a/drivers/usb/mon/mon_bin.c
+++ b/drivers/usb/mon/mon_bin.c
@@ -37,6 +37,7 @@
 #define MON_IOCX_GET   _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get)
 #define MON_IOCX_MFETCH _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch)
 #define MON_IOCH_MFLUSH _IO(MON_IOC_MAGIC, 8)
+
 #ifdef CONFIG_COMPAT
 #define MON_IOCX_GET32 _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get32)
 #define MON_IOCX_MFETCH32 _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch32)
@@ -921,21 +922,6 @@
 		}
 		break;
 
-#ifdef CONFIG_COMPAT
-	case MON_IOCX_GET32: {
-		struct mon_bin_get32 getb;
-
-		if (copy_from_user(&getb, (void __user *)arg,
-					    sizeof(struct mon_bin_get32)))
-			return -EFAULT;
-
-		ret = mon_bin_get_event(file, rp,
-		    compat_ptr(getb.hdr32), compat_ptr(getb.data32),
-		    getb.alloc32);
-		}
-		break;
-#endif
-
 	case MON_IOCX_MFETCH:
 		{
 		struct mon_bin_mfetch mfetch;
@@ -962,35 +948,6 @@
 		}
 		break;
 
-#ifdef CONFIG_COMPAT
-	case MON_IOCX_MFETCH32:
-		{
-		struct mon_bin_mfetch32 mfetch;
-		struct mon_bin_mfetch32 __user *uptr;
-
-		uptr = (struct mon_bin_mfetch32 __user *) compat_ptr(arg);
-
-		if (copy_from_user(&mfetch, uptr, sizeof(mfetch)))
-			return -EFAULT;
-
-		if (mfetch.nflush32) {
-			ret = mon_bin_flush(rp, mfetch.nflush32);
-			if (ret < 0)
-				return ret;
-			if (put_user(ret, &uptr->nflush32))
-				return -EFAULT;
-		}
-		ret = mon_bin_fetch(file, rp, compat_ptr(mfetch.offvec32),
-		    mfetch.nfetch32);
-		if (ret < 0)
-			return ret;
-		if (put_user(ret, &uptr->nfetch32))
-			return -EFAULT;
-		ret = 0;
-		}
-		break;
-#endif
-
 	case MON_IOCG_STATS: {
 		struct mon_bin_stats __user *sp;
 		unsigned int nevents;
@@ -1018,6 +975,73 @@
 	return ret;
 }
 
+#ifdef CONFIG_COMPAT
+static long mon_bin_compat_ioctl(struct file *file,
+    unsigned int cmd, unsigned long arg)
+{
+	struct mon_reader_bin *rp = file->private_data;
+	int ret;
+
+	switch (cmd) {
+
+	case MON_IOCX_GET32: {
+		struct mon_bin_get32 getb;
+
+		if (copy_from_user(&getb, (void __user *)arg,
+					    sizeof(struct mon_bin_get32)))
+			return -EFAULT;
+
+		ret = mon_bin_get_event(file, rp,
+		    compat_ptr(getb.hdr32), compat_ptr(getb.data32),
+		    getb.alloc32);
+		if (ret < 0)
+			return ret;
+		}
+		return 0;
+
+	case MON_IOCX_MFETCH32:
+		{
+		struct mon_bin_mfetch32 mfetch;
+		struct mon_bin_mfetch32 __user *uptr;
+
+		uptr = (struct mon_bin_mfetch32 __user *) compat_ptr(arg);
+
+		if (copy_from_user(&mfetch, uptr, sizeof(mfetch)))
+			return -EFAULT;
+
+		if (mfetch.nflush32) {
+			ret = mon_bin_flush(rp, mfetch.nflush32);
+			if (ret < 0)
+				return ret;
+			if (put_user(ret, &uptr->nflush32))
+				return -EFAULT;
+		}
+		ret = mon_bin_fetch(file, rp, compat_ptr(mfetch.offvec32),
+		    mfetch.nfetch32);
+		if (ret < 0)
+			return ret;
+		if (put_user(ret, &uptr->nfetch32))
+			return -EFAULT;
+		}
+		return 0;
+
+	case MON_IOCG_STATS:
+		return mon_bin_ioctl(NULL, file, cmd,
+					    (unsigned long) compat_ptr(arg));
+
+	case MON_IOCQ_URB_LEN:
+	case MON_IOCQ_RING_SIZE:
+	case MON_IOCT_RING_SIZE:
+	case MON_IOCH_MFLUSH:
+		return mon_bin_ioctl(NULL, file, cmd, arg);
+
+	default:
+		;
+	}
+	return -ENOTTY;
+}
+#endif /* CONFIG_COMPAT */
+
 static unsigned int
 mon_bin_poll(struct file *file, struct poll_table_struct *wait)
 {
@@ -1094,6 +1118,9 @@
 	/* .write =	mon_text_write, */
 	.poll =		mon_bin_poll,
 	.ioctl =	mon_bin_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl =	mon_bin_compat_ioctl,
+#endif
 	.release =	mon_bin_release,
 	.mmap =		mon_bin_mmap,
 };
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 5af7379..9985db0 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -11,6 +11,7 @@
 	depends on (USB || USB_GADGET) && HAVE_CLK
 	depends on !SUPERH
 	select TWL4030_USB if MACH_OMAP_3430SDP
+	select USB_OTG_UTILS
 	tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
 	help
 	  Say Y here if your system has a dual role high speed USB
@@ -49,7 +50,7 @@
 	depends on USB_MUSB_HDRC && ARCH_OMAP34XX
 
 comment "Blackfin high speed USB Support"
-	depends on USB_MUSB_HDRC && (BF54x && !BF544) || (BF52x && !BF522 && !BF523)
+	depends on USB_MUSB_HDRC && ((BF54x && !BF544) || (BF52x && !BF522 && !BF523))
 
 config USB_TUSB6010
 	boolean "TUSB 6010 support"
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index 5ad6d08..569ef0f 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -9,6 +9,7 @@
 #include <linux/usb.h>
 
 #include "musb_core.h"
+#include "musb_debug.h"
 #include "cppi_dma.h"
 
 
@@ -423,6 +424,7 @@
 	}
 }
 
+#ifdef CONFIG_USB_MUSB_DEBUG
 static void cppi_dump_rxbd(const char *tag, struct cppi_descriptor *bd)
 {
 	pr_debug("RXBD/%s %08x: "
@@ -431,10 +433,11 @@
 			bd->hw_next, bd->hw_bufp, bd->hw_off_len,
 			bd->hw_options);
 }
+#endif
 
 static void cppi_dump_rxq(int level, const char *tag, struct cppi_channel *rx)
 {
-#if MUSB_DEBUG > 0
+#ifdef CONFIG_USB_MUSB_DEBUG
 	struct cppi_descriptor	*bd;
 
 	if (!_dbg_level(level))
@@ -881,12 +884,14 @@
 	bd->hw_options |= CPPI_SOP_SET;
 	tail->hw_options |= CPPI_EOP_SET;
 
-	if (debug >= 5) {
+#ifdef CONFIG_USB_MUSB_DEBUG
+	if (_dbg_level(5)) {
 		struct cppi_descriptor	*d;
 
 		for (d = rx->head; d; d = d->next)
 			cppi_dump_rxbd("S", d);
 	}
+#endif
 
 	/* in case the preceding transfer left some state... */
 	tail = rx->last_processed;
@@ -990,6 +995,7 @@
 	cppi_ch->offset = 0;
 	cppi_ch->maxpacket = maxpacket;
 	cppi_ch->buf_len = len;
+	cppi_ch->channel.actual_len = 0;
 
 	/* TX channel? or RX? */
 	if (cppi_ch->transmit)
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 0d566dc..5a8fd5d 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -32,9 +32,10 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 
-#include <mach/arch/hardware.h>
-#include <mach/arch/memory.h>
-#include <mach/arch/gpio.h>
+#include <mach/hardware.h>
+#include <mach/memory.h>
+#include <mach/gpio.h>
+
 #include <asm/mach-types.h>
 
 #include "musb_core.h"
@@ -370,12 +371,6 @@
 	return -EIO;
 }
 
-int musb_platform_set_mode(struct musb *musb, u8 mode)
-{
-       /* EVM can't do this (right?) */
-       return -EIO;
-}
-
 int __init musb_platform_init(struct musb *musb)
 {
 	void __iomem	*tibase = musb->ctrl_base;
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 6c7faac..2cc34fa 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1824,8 +1824,9 @@
 	musb_gadget_cleanup(musb);
 #endif
 
-	if (musb->nIrq >= 0 && musb->irq_wake) {
-		disable_irq_wake(musb->nIrq);
+	if (musb->nIrq >= 0) {
+		if (musb->irq_wake)
+			disable_irq_wake(musb->nIrq);
 		free_irq(musb->nIrq, musb);
 	}
 	if (is_dma_capable() && musb->dma_controller) {
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 6197dae..4ea3053 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -874,10 +874,10 @@
 		status = -EBUSY;
 		goto fail;
 	}
-	musb_ep->type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+	musb_ep->type = usb_endpoint_type(desc);
 
 	/* check direction and (later) maxpacket size against endpoint */
-	if ((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != epnum)
+	if (usb_endpoint_num(desc) != epnum)
 		goto fail;
 
 	/* REVISIT this rules out high bandwidth periodic transfers */
@@ -890,7 +890,7 @@
 	 * packet size (or fail), set the mode, clear the fifo
 	 */
 	musb_ep_select(mbase, epnum);
-	if (desc->bEndpointAddress & USB_DIR_IN) {
+	if (usb_endpoint_dir_in(desc)) {
 		u16 int_txe = musb_readw(mbase, MUSB_INTRTXE);
 
 		if (hw_ep->is_shared_fifo)
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 99fa612..a035cec 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1847,8 +1847,8 @@
 		goto done;
 	}
 
-	qh->epnum = epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
-	qh->type = epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+	qh->epnum = usb_endpoint_num(epd);
+	qh->type = usb_endpoint_type(epd);
 
 	/* NOTE: urb->dev->devnum is wrong during SET_ADDRESS */
 	qh->addr_reg = (u8) usb_pipedevice(urb->pipe);
diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
index 52f7f29..7e073a0 100644
--- a/drivers/usb/musb/tusb6010_omap.c
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -15,8 +15,8 @@
 #include <linux/usb.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/mux.h>
+#include <mach/dma.h>
+#include <mach/mux.h>
 
 #include "musb_core.h"
 
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 8e8dbdb..ee55b44 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -6,14 +6,14 @@
 
 comment "OTG and related infrastructure"
 
-if USB || USB_GADGET
-
 config USB_OTG_UTILS
 	bool
 	help
 	  Select this to make sure the build includes objects from
 	  the OTG infrastructure directory.
 
+if USB || USB_GADGET
+
 #
 # USB Transceiver Drivers
 #
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index cfaf1f0..027f4b7 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -85,6 +85,8 @@
 	{ USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
 	{ USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
 	{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
+	{ USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
+	{ USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */
 	{ USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
 	{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
 	{ USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index ef6cfa5..7559733 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -660,6 +660,8 @@
 	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
+	{ USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
+	{ USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
@@ -2030,7 +2032,7 @@
 			spin_unlock_irqrestore(&priv->rx_lock, flags);
 			dbg("%s - deferring remainder until unthrottled",
 					__func__);
-			return;
+			goto out;
 		}
 		spin_unlock_irqrestore(&priv->rx_lock, flags);
 		/* if the port is closed stop trying to read */
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 373ee09..1b62eff 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -854,6 +854,10 @@
 #define FTDI_DOMINTELL_DGQG_PID	0xEF50	/* Master */
 #define FTDI_DOMINTELL_DUSB_PID	0xEF51	/* DUSB01 module */
 
+/* Alti-2 products  http://www.alti-2.com */
+#define ALTI2_VID	0x1BC9
+#define ALTI2_N3_PID	0x6001	/* Neptune 3 */
+
 /* Commands */
 #define FTDI_SIO_RESET 		0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL 	1 /* Set the modem control register */
@@ -881,6 +885,11 @@
 #define RATOC_PRODUCT_ID_USB60F	0xb020
 
 /*
+ * DIEBOLD BCS SE923
+ */
+#define DIEBOLD_BCS_SE923_PID	0xfb99
+
+/*
  *   BmRequestType:  1100 0000b
  *   bRequest:       FTDI_E2_READ
  *   wValue:         0
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 5ed1834..6c89da9 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -158,6 +158,13 @@
 #define HUAWEI_PRODUCT_E143E			0x143E
 #define HUAWEI_PRODUCT_E143F			0x143F
 
+#define QUANTA_VENDOR_ID			0x0408
+#define QUANTA_PRODUCT_Q101			0xEA02
+#define QUANTA_PRODUCT_Q111			0xEA03
+#define QUANTA_PRODUCT_GLX			0xEA04
+#define QUANTA_PRODUCT_GKE			0xEA05
+#define QUANTA_PRODUCT_GLE			0xEA06
+
 #define NOVATELWIRELESS_VENDOR_ID		0x1410
 
 /* YISO PRODUCTS */
@@ -224,7 +231,7 @@
 #define ONDA_VENDOR_ID				0x19d2
 #define ONDA_PRODUCT_MSA501HS			0x0001
 #define ONDA_PRODUCT_ET502HS			0x0002
-#define ONDA_PRODUCT_MT503HS			0x0200
+#define ONDA_PRODUCT_MT503HS			0x2000
 
 #define BANDRICH_VENDOR_ID			0x1A8D
 #define BANDRICH_PRODUCT_C100_1			0x1002
@@ -298,6 +305,11 @@
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_GT) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_EX) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_MODEM) },
+	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_Q101) },
+	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_Q111) },
+	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLX) },
+	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GKE) },
+	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLE) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) },
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 3cf41df..baf5911 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -184,6 +184,7 @@
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) },
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) },
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) },
+	{ USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
 };
 
 static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = {
@@ -191,6 +192,7 @@
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
+	{ USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
 };
 
 static struct usb_device_id ti_id_table_combined[6+2*TI_EXTRA_VID_PID_COUNT+1] = {
@@ -205,6 +207,7 @@
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
+	{ USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
 	{ }
 };
 
diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h
index 7e4752f..b7ea5db 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.h
+++ b/drivers/usb/serial/ti_usb_3410_5052.h
@@ -27,7 +27,9 @@
 
 /* Vendor and product ids */
 #define TI_VENDOR_ID			0x0451
+#define IBM_VENDOR_ID			0x04b3
 #define TI_3410_PRODUCT_ID		0x3410
+#define IBM_4543_PRODUCT_ID		0x4543
 #define TI_3410_EZ430_ID		0xF430  /* TI ez430 development tool */
 #define TI_5052_BOOT_PRODUCT_ID		0x5052	/* no EEPROM, no firmware */
 #define TI_5152_BOOT_PRODUCT_ID		0x5152	/* no EEPROM, no firmware */
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index a7f9513..69269f7 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -995,6 +995,16 @@
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64),
 
+/* Reported by Jean-Baptiste Onofre <jb@nanthrax.net>
+ * Support the following product :
+ *    "Dane-Elec MediaTouch"
+ */
+UNUSUAL_DEV(  0x071b, 0x32bb, 0x0000, 0x0000,
+		"RockChip",
+		"MTP",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64),
+
 /* Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com>
  * This USB MP3/AVI player device fails and disconnects if more than 128
  * sectors (64kB) are read/written in a single command, and may be present
@@ -1251,6 +1261,13 @@
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY),
 
+/* Reported by Martijn Hijdra <martijn.hijdra@gmail.com> */
+UNUSUAL_DEV( 0x0840, 0x0085, 0x0001, 0x0001,
+		"Argosy",
+		"Storage",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY),
+
 /* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
  * Flag will support Bulk devices which use a standards-violating 32-byte
  * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with
@@ -1589,6 +1606,13 @@
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_NO_WP_DETECT ),
 
+/* Reported by The Solutor <thesolutor@gmail.com> */
+UNUSUAL_DEV(  0x0fce, 0xd0e1, 0x0000, 0x0000,
+		"Sony Ericsson",
+		"MD400",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_IGNORE_DEVICE),
+
 /* Reported by Jan Mate <mate@fiit.stuba.sk>
  * and by Soeren Sonnenburg <kernel@nn7.de> */
 UNUSUAL_DEV(  0x0fce, 0xe030, 0x0000, 0x0000,
@@ -2031,15 +2055,11 @@
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
-/* Reported by Mauro Andreolini <andreoli@weblab.ing.unimo.it>
- * This entry is needed to bypass the ZeroCD mechanism
- * and to properly load as a modem device.
- */
-UNUSUAL_DEV(  0x19d2, 0x2000, 0x0000, 0x0000,
-		"Onda ET502HS",
-		"USB MMC Storage",
+UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001,
+		"ST",
+		"2A",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
-		US_FL_IGNORE_DEVICE),
+		US_FL_FIX_CAPACITY),
 
 /* patch submitted by Davide Perini <perini.davide@dpsoftware.org>
  * and Renato Perini <rperini@email.it>
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 6372f8b..c94f719 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2123,6 +2123,18 @@
 	  Select this option if display contents should be inherited as set by
 	  the bootloader.
 
+config FB_MX3
+       tristate "MX3 Framebuffer support"
+       depends on FB && MX3_IPU
+       select FB_CFB_FILLRECT
+       select FB_CFB_COPYAREA
+       select FB_CFB_IMAGEBLIT
+       default y
+       help
+         This is a framebuffer device for the i.MX31 LCD Controller. So
+         far only synchronous displays are supported. If you plan to use
+         an LCD display with your i.MX31 system, say Y here.
+
 source "drivers/video/omap/Kconfig"
 
 source "drivers/video/backlight/Kconfig"
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index be2b657..2a998ca 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -132,6 +132,7 @@
 obj-$(CONFIG_FB_OF)               += offb.o
 obj-$(CONFIG_FB_BF54X_LQ043)	  += bf54x-lq043fb.o
 obj-$(CONFIG_FB_BFIN_T350MCQB)	  += bfin-t350mcqb-fb.o
+obj-$(CONFIG_FB_MX3)              += mx3fb.o
 
 # the test framebuffer is last
 obj-$(CONFIG_FB_VIRTUAL)          += vfb.o
diff --git a/drivers/video/aty/radeon_i2c.c b/drivers/video/aty/radeon_i2c.c
index 2c55671..359fc64 100644
--- a/drivers/video/aty/radeon_i2c.c
+++ b/drivers/video/aty/radeon_i2c.c
@@ -72,7 +72,6 @@
 	snprintf(chan->adapter.name, sizeof(chan->adapter.name),
 		 "radeonfb %s", name);
 	chan->adapter.owner		= THIS_MODULE;
-	chan->adapter.id		= I2C_HW_B_RADEON;
 	chan->adapter.algo_data		= &chan->algo;
 	chan->adapter.dev.parent	= &chan->rinfo->pdev->dev;
 	chan->algo.setsda		= radeon_gpio_setsda;
diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/bf54x-lq043fb.c
index 7644ed2..37e60b1 100644
--- a/drivers/video/bf54x-lq043fb.c
+++ b/drivers/video/bf54x-lq043fb.c
@@ -335,7 +335,20 @@
 				   struct fb_info *info)
 {
 
-	if (var->bits_per_pixel != LCD_BPP) {
+	switch (var->bits_per_pixel) {
+	case 24:/* TRUECOLOUR, 16m */
+		var->red.offset = 16;
+		var->green.offset = 8;
+		var->blue.offset = 0;
+		var->red.length = var->green.length = var->blue.length = 8;
+		var->transp.offset = 0;
+		var->transp.length = 0;
+		var->transp.msb_right = 0;
+		var->red.msb_right = 0;
+		var->green.msb_right = 0;
+		var->blue.msb_right = 0;
+		break;
+	default:
 		pr_debug("%s: depth not supported: %u BPP\n", __func__,
 			 var->bits_per_pixel);
 		return -EINVAL;
diff --git a/drivers/video/bfin-t350mcqb-fb.c b/drivers/video/bfin-t350mcqb-fb.c
index a9b3ada..2a423d3 100644
--- a/drivers/video/bfin-t350mcqb-fb.c
+++ b/drivers/video/bfin-t350mcqb-fb.c
@@ -254,7 +254,20 @@
 				   struct fb_info *info)
 {
 
-	if (var->bits_per_pixel != LCD_BPP) {
+	switch (var->bits_per_pixel) {
+	case 24:/* TRUECOLOUR, 16m */
+		var->red.offset = 0;
+		var->green.offset = 8;
+		var->blue.offset = 16;
+		var->red.length = var->green.length = var->blue.length = 8;
+		var->transp.offset = 0;
+		var->transp.length = 0;
+		var->transp.msb_right = 0;
+		var->red.msb_right = 0;
+		var->green.msb_right = 0;
+		var->blue.msb_right = 0;
+		break;
+	default:
 		pr_debug("%s: depth not supported: %u BPP\n", __func__,
 			 var->bits_per_pixel);
 		return -EINVAL;
diff --git a/drivers/video/i810/i810-i2c.c b/drivers/video/i810/i810-i2c.c
index 7787c33..9dd55e5 100644
--- a/drivers/video/i810/i810-i2c.c
+++ b/drivers/video/i810/i810-i2c.c
@@ -90,7 +90,6 @@
         chan->adapter.owner             = THIS_MODULE;
         chan->adapter.algo_data         = &chan->algo;
         chan->adapter.dev.parent        = &chan->par->dev->dev;
-	chan->adapter.id                = I2C_HW_B_I810;
 	chan->algo.setsda               = i810i2c_setsda;
 	chan->algo.setscl               = i810i2c_setscl;
 	chan->algo.getsda               = i810i2c_getsda;
diff --git a/drivers/video/intelfb/intelfb_i2c.c b/drivers/video/intelfb/intelfb_i2c.c
index 5d896b8..b306549 100644
--- a/drivers/video/intelfb/intelfb_i2c.c
+++ b/drivers/video/intelfb/intelfb_i2c.c
@@ -111,7 +111,6 @@
 		 "intelfb %s", name);
 	chan->adapter.class		= class;
 	chan->adapter.owner		= THIS_MODULE;
-	chan->adapter.id		= I2C_HW_B_INTELFB;
 	chan->adapter.algo_data		= &chan->algo;
 	chan->adapter.dev.parent	= &chan->dinfo->pdev->dev;
 	chan->algo.setsda		= intelfb_gpio_setsda;
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
new file mode 100644
index 0000000..8a75d05
--- /dev/null
+++ b/drivers/video/mx3fb.c
@@ -0,0 +1,1555 @@
+/*
+ * Copyright (C) 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/console.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+
+#include <mach/hardware.h>
+#include <mach/ipu.h>
+#include <mach/mx3fb.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+#define MX3FB_NAME             "mx3_sdc_fb"
+
+#define MX3FB_REG_OFFSET       0xB4
+
+/* SDC Registers */
+#define SDC_COM_CONF           (0xB4 - MX3FB_REG_OFFSET)
+#define SDC_GW_CTRL            (0xB8 - MX3FB_REG_OFFSET)
+#define SDC_FG_POS             (0xBC - MX3FB_REG_OFFSET)
+#define SDC_BG_POS             (0xC0 - MX3FB_REG_OFFSET)
+#define SDC_CUR_POS            (0xC4 - MX3FB_REG_OFFSET)
+#define SDC_PWM_CTRL           (0xC8 - MX3FB_REG_OFFSET)
+#define SDC_CUR_MAP            (0xCC - MX3FB_REG_OFFSET)
+#define SDC_HOR_CONF           (0xD0 - MX3FB_REG_OFFSET)
+#define SDC_VER_CONF           (0xD4 - MX3FB_REG_OFFSET)
+#define SDC_SHARP_CONF_1       (0xD8 - MX3FB_REG_OFFSET)
+#define SDC_SHARP_CONF_2       (0xDC - MX3FB_REG_OFFSET)
+
+/* Register bits */
+#define SDC_COM_TFT_COLOR      0x00000001UL
+#define SDC_COM_FG_EN          0x00000010UL
+#define SDC_COM_GWSEL          0x00000020UL
+#define SDC_COM_GLB_A          0x00000040UL
+#define SDC_COM_KEY_COLOR_G    0x00000080UL
+#define SDC_COM_BG_EN          0x00000200UL
+#define SDC_COM_SHARP          0x00001000UL
+
+#define SDC_V_SYNC_WIDTH_L     0x00000001UL
+
+/* Display Interface registers */
+#define DI_DISP_IF_CONF                (0x0124 - MX3FB_REG_OFFSET)
+#define DI_DISP_SIG_POL                (0x0128 - MX3FB_REG_OFFSET)
+#define DI_SER_DISP1_CONF      (0x012C - MX3FB_REG_OFFSET)
+#define DI_SER_DISP2_CONF      (0x0130 - MX3FB_REG_OFFSET)
+#define DI_HSP_CLK_PER         (0x0134 - MX3FB_REG_OFFSET)
+#define DI_DISP0_TIME_CONF_1   (0x0138 - MX3FB_REG_OFFSET)
+#define DI_DISP0_TIME_CONF_2   (0x013C - MX3FB_REG_OFFSET)
+#define DI_DISP0_TIME_CONF_3   (0x0140 - MX3FB_REG_OFFSET)
+#define DI_DISP1_TIME_CONF_1   (0x0144 - MX3FB_REG_OFFSET)
+#define DI_DISP1_TIME_CONF_2   (0x0148 - MX3FB_REG_OFFSET)
+#define DI_DISP1_TIME_CONF_3   (0x014C - MX3FB_REG_OFFSET)
+#define DI_DISP2_TIME_CONF_1   (0x0150 - MX3FB_REG_OFFSET)
+#define DI_DISP2_TIME_CONF_2   (0x0154 - MX3FB_REG_OFFSET)
+#define DI_DISP2_TIME_CONF_3   (0x0158 - MX3FB_REG_OFFSET)
+#define DI_DISP3_TIME_CONF     (0x015C - MX3FB_REG_OFFSET)
+#define DI_DISP0_DB0_MAP       (0x0160 - MX3FB_REG_OFFSET)
+#define DI_DISP0_DB1_MAP       (0x0164 - MX3FB_REG_OFFSET)
+#define DI_DISP0_DB2_MAP       (0x0168 - MX3FB_REG_OFFSET)
+#define DI_DISP0_CB0_MAP       (0x016C - MX3FB_REG_OFFSET)
+#define DI_DISP0_CB1_MAP       (0x0170 - MX3FB_REG_OFFSET)
+#define DI_DISP0_CB2_MAP       (0x0174 - MX3FB_REG_OFFSET)
+#define DI_DISP1_DB0_MAP       (0x0178 - MX3FB_REG_OFFSET)
+#define DI_DISP1_DB1_MAP       (0x017C - MX3FB_REG_OFFSET)
+#define DI_DISP1_DB2_MAP       (0x0180 - MX3FB_REG_OFFSET)
+#define DI_DISP1_CB0_MAP       (0x0184 - MX3FB_REG_OFFSET)
+#define DI_DISP1_CB1_MAP       (0x0188 - MX3FB_REG_OFFSET)
+#define DI_DISP1_CB2_MAP       (0x018C - MX3FB_REG_OFFSET)
+#define DI_DISP2_DB0_MAP       (0x0190 - MX3FB_REG_OFFSET)
+#define DI_DISP2_DB1_MAP       (0x0194 - MX3FB_REG_OFFSET)
+#define DI_DISP2_DB2_MAP       (0x0198 - MX3FB_REG_OFFSET)
+#define DI_DISP2_CB0_MAP       (0x019C - MX3FB_REG_OFFSET)
+#define DI_DISP2_CB1_MAP       (0x01A0 - MX3FB_REG_OFFSET)
+#define DI_DISP2_CB2_MAP       (0x01A4 - MX3FB_REG_OFFSET)
+#define DI_DISP3_B0_MAP                (0x01A8 - MX3FB_REG_OFFSET)
+#define DI_DISP3_B1_MAP                (0x01AC - MX3FB_REG_OFFSET)
+#define DI_DISP3_B2_MAP                (0x01B0 - MX3FB_REG_OFFSET)
+#define DI_DISP_ACC_CC         (0x01B4 - MX3FB_REG_OFFSET)
+#define DI_DISP_LLA_CONF       (0x01B8 - MX3FB_REG_OFFSET)
+#define DI_DISP_LLA_DATA       (0x01BC - MX3FB_REG_OFFSET)
+
+/* DI_DISP_SIG_POL bits */
+#define DI_D3_VSYNC_POL_SHIFT          28
+#define DI_D3_HSYNC_POL_SHIFT          27
+#define DI_D3_DRDY_SHARP_POL_SHIFT     26
+#define DI_D3_CLK_POL_SHIFT            25
+#define DI_D3_DATA_POL_SHIFT           24
+
+/* DI_DISP_IF_CONF bits */
+#define DI_D3_CLK_IDLE_SHIFT           26
+#define DI_D3_CLK_SEL_SHIFT            25
+#define DI_D3_DATAMSK_SHIFT            24
+
+enum ipu_panel {
+       IPU_PANEL_SHARP_TFT,
+       IPU_PANEL_TFT,
+};
+
+struct ipu_di_signal_cfg {
+       unsigned datamask_en:1;
+       unsigned clksel_en:1;
+       unsigned clkidle_en:1;
+       unsigned data_pol:1;    /* true = inverted */
+       unsigned clk_pol:1;     /* true = rising edge */
+       unsigned enable_pol:1;
+       unsigned Hsync_pol:1;   /* true = active high */
+       unsigned Vsync_pol:1;
+};
+
+static const struct fb_videomode mx3fb_modedb[] = {
+       {
+               /* 240x320 @ 60 Hz */
+               .name           = "Sharp-QVGA",
+               .refresh        = 60,
+               .xres           = 240,
+               .yres           = 320,
+               .pixclock       = 185925,
+               .left_margin    = 9,
+               .right_margin   = 16,
+               .upper_margin   = 7,
+               .lower_margin   = 9,
+               .hsync_len      = 1,
+               .vsync_len      = 1,
+               .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
+                                 FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT |
+                                 FB_SYNC_CLK_IDLE_EN,
+               .vmode          = FB_VMODE_NONINTERLACED,
+               .flag           = 0,
+       }, {
+               /* 240x33 @ 60 Hz */
+               .name           = "Sharp-CLI",
+               .refresh        = 60,
+               .xres           = 240,
+               .yres           = 33,
+               .pixclock       = 185925,
+               .left_margin    = 9,
+               .right_margin   = 16,
+               .upper_margin   = 7,
+               .lower_margin   = 9 + 287,
+               .hsync_len      = 1,
+               .vsync_len      = 1,
+               .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
+                                 FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT |
+                                 FB_SYNC_CLK_IDLE_EN,
+               .vmode          = FB_VMODE_NONINTERLACED,
+               .flag           = 0,
+       }, {
+               /* 640x480 @ 60 Hz */
+               .name           = "NEC-VGA",
+               .refresh        = 60,
+               .xres           = 640,
+               .yres           = 480,
+               .pixclock       = 38255,
+               .left_margin    = 144,
+               .right_margin   = 0,
+               .upper_margin   = 34,
+               .lower_margin   = 40,
+               .hsync_len      = 1,
+               .vsync_len      = 1,
+               .sync           = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+               .vmode          = FB_VMODE_NONINTERLACED,
+               .flag           = 0,
+       }, {
+               /* NTSC TV output */
+               .name           = "TV-NTSC",
+               .refresh        = 60,
+               .xres           = 640,
+               .yres           = 480,
+               .pixclock       = 37538,
+               .left_margin    = 38,
+               .right_margin   = 858 - 640 - 38 - 3,
+               .upper_margin   = 36,
+               .lower_margin   = 518 - 480 - 36 - 1,
+               .hsync_len      = 3,
+               .vsync_len      = 1,
+               .sync           = 0,
+               .vmode          = FB_VMODE_NONINTERLACED,
+               .flag           = 0,
+       }, {
+               /* PAL TV output */
+               .name           = "TV-PAL",
+               .refresh        = 50,
+               .xres           = 640,
+               .yres           = 480,
+               .pixclock       = 37538,
+               .left_margin    = 38,
+               .right_margin   = 960 - 640 - 38 - 32,
+               .upper_margin   = 32,
+               .lower_margin   = 555 - 480 - 32 - 3,
+               .hsync_len      = 32,
+               .vsync_len      = 3,
+               .sync           = 0,
+               .vmode          = FB_VMODE_NONINTERLACED,
+               .flag           = 0,
+       }, {
+               /* TV output VGA mode, 640x480 @ 65 Hz */
+               .name           = "TV-VGA",
+               .refresh        = 60,
+               .xres           = 640,
+               .yres           = 480,
+               .pixclock       = 40574,
+               .left_margin    = 35,
+               .right_margin   = 45,
+               .upper_margin   = 9,
+               .lower_margin   = 1,
+               .hsync_len      = 46,
+               .vsync_len      = 5,
+               .sync           = 0,
+               .vmode          = FB_VMODE_NONINTERLACED,
+               .flag           = 0,
+       },
+};
+
+struct mx3fb_data {
+       struct fb_info          *fbi;
+       int                     backlight_level;
+       void __iomem            *reg_base;
+       spinlock_t              lock;
+       struct device           *dev;
+
+       uint32_t                h_start_width;
+       uint32_t                v_start_width;
+};
+
+struct dma_chan_request {
+       struct mx3fb_data       *mx3fb;
+       enum ipu_channel        id;
+};
+
+/* MX3 specific framebuffer information. */
+struct mx3fb_info {
+       int                             blank;
+       enum ipu_channel                ipu_ch;
+       uint32_t                        cur_ipu_buf;
+
+       u32                             pseudo_palette[16];
+
+       struct completion               flip_cmpl;
+       struct mutex                    mutex;  /* Protects fb-ops */
+       struct mx3fb_data               *mx3fb;
+       struct idmac_channel            *idmac_channel;
+       struct dma_async_tx_descriptor  *txd;
+       dma_cookie_t                    cookie;
+       struct scatterlist              sg[2];
+
+       u32                             sync;   /* preserve var->sync flags */
+};
+
+static void mx3fb_dma_done(void *);
+
+/* Used fb-mode and bpp. Can be set on kernel command line, therefore file-static. */
+static const char *fb_mode;
+static unsigned long default_bpp = 16;
+
+static u32 mx3fb_read_reg(struct mx3fb_data *mx3fb, unsigned long reg)
+{
+       return __raw_readl(mx3fb->reg_base + reg);
+}
+
+static void mx3fb_write_reg(struct mx3fb_data *mx3fb, u32 value, unsigned long reg)
+{
+       __raw_writel(value, mx3fb->reg_base + reg);
+}
+
+static const uint32_t di_mappings[] = {
+       0x1600AAAA, 0x00E05555, 0x00070000, 3,  /* RGB888 */
+       0x0005000F, 0x000B000F, 0x0011000F, 1,  /* RGB666 */
+       0x0011000F, 0x000B000F, 0x0005000F, 1,  /* BGR666 */
+       0x0004003F, 0x000A000F, 0x000F003F, 1   /* RGB565 */
+};
+
+static void sdc_fb_init(struct mx3fb_info *fbi)
+{
+       struct mx3fb_data *mx3fb = fbi->mx3fb;
+       uint32_t reg;
+
+       reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+
+       mx3fb_write_reg(mx3fb, reg | SDC_COM_BG_EN, SDC_COM_CONF);
+}
+
+/* Returns enabled flag before uninit */
+static uint32_t sdc_fb_uninit(struct mx3fb_info *fbi)
+{
+       struct mx3fb_data *mx3fb = fbi->mx3fb;
+       uint32_t reg;
+
+       reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+
+       mx3fb_write_reg(mx3fb, reg & ~SDC_COM_BG_EN, SDC_COM_CONF);
+
+       return reg & SDC_COM_BG_EN;
+}
+
+static void sdc_enable_channel(struct mx3fb_info *mx3_fbi)
+{
+       struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+       struct idmac_channel *ichan = mx3_fbi->idmac_channel;
+       struct dma_chan *dma_chan = &ichan->dma_chan;
+       unsigned long flags;
+       dma_cookie_t cookie;
+
+       dev_dbg(mx3fb->dev, "mx3fbi %p, desc %p, sg %p\n", mx3_fbi,
+               to_tx_desc(mx3_fbi->txd), to_tx_desc(mx3_fbi->txd)->sg);
+
+       /* This enables the channel */
+       if (mx3_fbi->cookie < 0) {
+               mx3_fbi->txd = dma_chan->device->device_prep_slave_sg(dma_chan,
+                     &mx3_fbi->sg[0], 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT);
+               if (!mx3_fbi->txd) {
+                       dev_err(mx3fb->dev, "Cannot allocate descriptor on %d\n",
+                               dma_chan->chan_id);
+                       return;
+               }
+
+               mx3_fbi->txd->callback_param    = mx3_fbi->txd;
+               mx3_fbi->txd->callback          = mx3fb_dma_done;
+
+               cookie = mx3_fbi->txd->tx_submit(mx3_fbi->txd);
+               dev_dbg(mx3fb->dev, "%d: Submit %p #%d [%c]\n", __LINE__,
+                      mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+');
+       } else {
+               if (!mx3_fbi->txd || !mx3_fbi->txd->tx_submit) {
+                       dev_err(mx3fb->dev, "Cannot enable channel %d\n",
+                               dma_chan->chan_id);
+                       return;
+               }
+
+               /* Just re-activate the same buffer */
+               dma_async_issue_pending(dma_chan);
+               cookie = mx3_fbi->cookie;
+               dev_dbg(mx3fb->dev, "%d: Re-submit %p #%d [%c]\n", __LINE__,
+                      mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+');
+       }
+
+       if (cookie >= 0) {
+               spin_lock_irqsave(&mx3fb->lock, flags);
+               sdc_fb_init(mx3_fbi);
+               mx3_fbi->cookie = cookie;
+               spin_unlock_irqrestore(&mx3fb->lock, flags);
+       }
+
+       /*
+        * Attention! Without this msleep the channel keeps generating
+        * interrupts. Next sdc_set_brightness() is going to be called
+        * from mx3fb_blank().
+        */
+       msleep(2);
+}
+
+static void sdc_disable_channel(struct mx3fb_info *mx3_fbi)
+{
+       struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+       uint32_t enabled;
+       unsigned long flags;
+
+       spin_lock_irqsave(&mx3fb->lock, flags);
+
+       enabled = sdc_fb_uninit(mx3_fbi);
+
+       spin_unlock_irqrestore(&mx3fb->lock, flags);
+
+       mx3_fbi->txd->chan->device->device_terminate_all(mx3_fbi->txd->chan);
+       mx3_fbi->txd = NULL;
+       mx3_fbi->cookie = -EINVAL;
+}
+
+/**
+ * sdc_set_window_pos() - set window position of the respective plane.
+ * @mx3fb:     mx3fb context.
+ * @channel:   IPU DMAC channel ID.
+ * @x_pos:     X coordinate relative to the top left corner to place window at.
+ * @y_pos:     Y coordinate relative to the top left corner to place window at.
+ * @return:    0 on success or negative error code on failure.
+ */
+static int sdc_set_window_pos(struct mx3fb_data *mx3fb, enum ipu_channel channel,
+                             int16_t x_pos, int16_t y_pos)
+{
+       x_pos += mx3fb->h_start_width;
+       y_pos += mx3fb->v_start_width;
+
+       if (channel != IDMAC_SDC_0)
+               return -EINVAL;
+
+       mx3fb_write_reg(mx3fb, (x_pos << 16) | y_pos, SDC_BG_POS);
+       return 0;
+}
+
+/**
+ * sdc_init_panel() - initialize a synchronous LCD panel.
+ * @mx3fb:             mx3fb context.
+ * @panel:             panel type.
+ * @pixel_clk:         desired pixel clock frequency in Hz.
+ * @width:             width of panel in pixels.
+ * @height:            height of panel in pixels.
+ * @pixel_fmt:         pixel format of buffer as FOURCC ASCII code.
+ * @h_start_width:     number of pixel clocks between the HSYNC signal pulse
+ *                     and the start of valid data.
+ * @h_sync_width:      width of the HSYNC signal in units of pixel clocks.
+ * @h_end_width:       number of pixel clocks between the end of valid data
+ *                     and the HSYNC signal for next line.
+ * @v_start_width:     number of lines between the VSYNC signal pulse and the
+ *                     start of valid data.
+ * @v_sync_width:      width of the VSYNC signal in units of lines
+ * @v_end_width:       number of lines between the end of valid data and the
+ *                     VSYNC signal for next frame.
+ * @sig:               bitfield of signal polarities for LCD interface.
+ * @return:            0 on success or negative error code on failure.
+ */
+static int sdc_init_panel(struct mx3fb_data *mx3fb, enum ipu_panel panel,
+                         uint32_t pixel_clk,
+                         uint16_t width, uint16_t height,
+                         enum pixel_fmt pixel_fmt,
+                         uint16_t h_start_width, uint16_t h_sync_width,
+                         uint16_t h_end_width, uint16_t v_start_width,
+                         uint16_t v_sync_width, uint16_t v_end_width,
+                         struct ipu_di_signal_cfg sig)
+{
+       unsigned long lock_flags;
+       uint32_t reg;
+       uint32_t old_conf;
+       uint32_t div;
+       struct clk *ipu_clk;
+
+       dev_dbg(mx3fb->dev, "panel size = %d x %d", width, height);
+
+       if (v_sync_width == 0 || h_sync_width == 0)
+               return -EINVAL;
+
+       /* Init panel size and blanking periods */
+       reg = ((uint32_t) (h_sync_width - 1) << 26) |
+               ((uint32_t) (width + h_start_width + h_end_width - 1) << 16);
+       mx3fb_write_reg(mx3fb, reg, SDC_HOR_CONF);
+
+#ifdef DEBUG
+       printk(KERN_CONT " hor_conf %x,", reg);
+#endif
+
+       reg = ((uint32_t) (v_sync_width - 1) << 26) | SDC_V_SYNC_WIDTH_L |
+           ((uint32_t) (height + v_start_width + v_end_width - 1) << 16);
+       mx3fb_write_reg(mx3fb, reg, SDC_VER_CONF);
+
+#ifdef DEBUG
+       printk(KERN_CONT " ver_conf %x\n", reg);
+#endif
+
+       mx3fb->h_start_width = h_start_width;
+       mx3fb->v_start_width = v_start_width;
+
+       switch (panel) {
+       case IPU_PANEL_SHARP_TFT:
+               mx3fb_write_reg(mx3fb, 0x00FD0102L, SDC_SHARP_CONF_1);
+               mx3fb_write_reg(mx3fb, 0x00F500F4L, SDC_SHARP_CONF_2);
+               mx3fb_write_reg(mx3fb, SDC_COM_SHARP | SDC_COM_TFT_COLOR, SDC_COM_CONF);
+               break;
+       case IPU_PANEL_TFT:
+               mx3fb_write_reg(mx3fb, SDC_COM_TFT_COLOR, SDC_COM_CONF);
+               break;
+       default:
+               return -EINVAL;
+       }
+
+       /* Init clocking */
+
+       /*
+        * Calculate divider: fractional part is 4 bits so simply multiple by
+        * 24 to get fractional part, as long as we stay under ~250MHz and on
+        * i.MX31 it (HSP_CLK) is <= 178MHz. Currently 128.267MHz
+        */
+       dev_dbg(mx3fb->dev, "pixel clk = %d\n", pixel_clk);
+
+       ipu_clk = clk_get(mx3fb->dev, "ipu_clk");
+       div = clk_get_rate(ipu_clk) * 16 / pixel_clk;
+       clk_put(ipu_clk);
+
+       if (div < 0x40) {       /* Divider less than 4 */
+               dev_dbg(mx3fb->dev,
+                       "InitPanel() - Pixel clock divider less than 4\n");
+               div = 0x40;
+       }
+
+       spin_lock_irqsave(&mx3fb->lock, lock_flags);
+
+       /*
+        * DISP3_IF_CLK_DOWN_WR is half the divider value and 2 fraction bits
+        * fewer. Subtract 1 extra from DISP3_IF_CLK_DOWN_WR based on timing
+        * debug. DISP3_IF_CLK_UP_WR is 0
+        */
+       mx3fb_write_reg(mx3fb, (((div / 8) - 1) << 22) | div, DI_DISP3_TIME_CONF);
+
+       /* DI settings */
+       old_conf = mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF) & 0x78FFFFFF;
+       old_conf |= sig.datamask_en << DI_D3_DATAMSK_SHIFT |
+           sig.clksel_en << DI_D3_CLK_SEL_SHIFT |
+           sig.clkidle_en << DI_D3_CLK_IDLE_SHIFT;
+       mx3fb_write_reg(mx3fb, old_conf, DI_DISP_IF_CONF);
+
+       old_conf = mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL) & 0xE0FFFFFF;
+       old_conf |= sig.data_pol << DI_D3_DATA_POL_SHIFT |
+           sig.clk_pol << DI_D3_CLK_POL_SHIFT |
+           sig.enable_pol << DI_D3_DRDY_SHARP_POL_SHIFT |
+           sig.Hsync_pol << DI_D3_HSYNC_POL_SHIFT |
+           sig.Vsync_pol << DI_D3_VSYNC_POL_SHIFT;
+       mx3fb_write_reg(mx3fb, old_conf, DI_DISP_SIG_POL);
+
+       switch (pixel_fmt) {
+       case IPU_PIX_FMT_RGB24:
+               mx3fb_write_reg(mx3fb, di_mappings[0], DI_DISP3_B0_MAP);
+               mx3fb_write_reg(mx3fb, di_mappings[1], DI_DISP3_B1_MAP);
+               mx3fb_write_reg(mx3fb, di_mappings[2], DI_DISP3_B2_MAP);
+               mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
+                            ((di_mappings[3] - 1) << 12), DI_DISP_ACC_CC);
+               break;
+       case IPU_PIX_FMT_RGB666:
+               mx3fb_write_reg(mx3fb, di_mappings[4], DI_DISP3_B0_MAP);
+               mx3fb_write_reg(mx3fb, di_mappings[5], DI_DISP3_B1_MAP);
+               mx3fb_write_reg(mx3fb, di_mappings[6], DI_DISP3_B2_MAP);
+               mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
+                            ((di_mappings[7] - 1) << 12), DI_DISP_ACC_CC);
+               break;
+       case IPU_PIX_FMT_BGR666:
+               mx3fb_write_reg(mx3fb, di_mappings[8], DI_DISP3_B0_MAP);
+               mx3fb_write_reg(mx3fb, di_mappings[9], DI_DISP3_B1_MAP);
+               mx3fb_write_reg(mx3fb, di_mappings[10], DI_DISP3_B2_MAP);
+               mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
+                            ((di_mappings[11] - 1) << 12), DI_DISP_ACC_CC);
+               break;
+       default:
+               mx3fb_write_reg(mx3fb, di_mappings[12], DI_DISP3_B0_MAP);
+               mx3fb_write_reg(mx3fb, di_mappings[13], DI_DISP3_B1_MAP);
+               mx3fb_write_reg(mx3fb, di_mappings[14], DI_DISP3_B2_MAP);
+               mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
+                            ((di_mappings[15] - 1) << 12), DI_DISP_ACC_CC);
+               break;
+       }
+
+       spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
+
+       dev_dbg(mx3fb->dev, "DI_DISP_IF_CONF = 0x%08X\n",
+               mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF));
+       dev_dbg(mx3fb->dev, "DI_DISP_SIG_POL = 0x%08X\n",
+               mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL));
+       dev_dbg(mx3fb->dev, "DI_DISP3_TIME_CONF = 0x%08X\n",
+               mx3fb_read_reg(mx3fb, DI_DISP3_TIME_CONF));
+
+       return 0;
+}
+
+/**
+ * sdc_set_color_key() - set the transparent color key for SDC graphic plane.
+ * @mx3fb:     mx3fb context.
+ * @channel:   IPU DMAC channel ID.
+ * @enable:    boolean to enable or disable color keyl.
+ * @color_key: 24-bit RGB color to use as transparent color key.
+ * @return:    0 on success or negative error code on failure.
+ */
+static int sdc_set_color_key(struct mx3fb_data *mx3fb, enum ipu_channel channel,
+                            bool enable, uint32_t color_key)
+{
+       uint32_t reg, sdc_conf;
+       unsigned long lock_flags;
+
+       spin_lock_irqsave(&mx3fb->lock, lock_flags);
+
+       sdc_conf = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+       if (channel == IDMAC_SDC_0)
+               sdc_conf &= ~SDC_COM_GWSEL;
+       else
+               sdc_conf |= SDC_COM_GWSEL;
+
+       if (enable) {
+               reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0xFF000000L;
+               mx3fb_write_reg(mx3fb, reg | (color_key & 0x00FFFFFFL),
+                            SDC_GW_CTRL);
+
+               sdc_conf |= SDC_COM_KEY_COLOR_G;
+       } else {
+               sdc_conf &= ~SDC_COM_KEY_COLOR_G;
+       }
+       mx3fb_write_reg(mx3fb, sdc_conf, SDC_COM_CONF);
+
+       spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
+
+       return 0;
+}
+
+/**
+ * sdc_set_global_alpha() - set global alpha blending modes.
+ * @mx3fb:     mx3fb context.
+ * @enable:    boolean to enable or disable global alpha blending. If disabled,
+ *             per pixel blending is used.
+ * @alpha:     global alpha value.
+ * @return:    0 on success or negative error code on failure.
+ */
+static int sdc_set_global_alpha(struct mx3fb_data *mx3fb, bool enable, uint8_t alpha)
+{
+       uint32_t reg;
+       unsigned long lock_flags;
+
+       spin_lock_irqsave(&mx3fb->lock, lock_flags);
+
+       if (enable) {
+               reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0x00FFFFFFL;
+               mx3fb_write_reg(mx3fb, reg | ((uint32_t) alpha << 24), SDC_GW_CTRL);
+
+               reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+               mx3fb_write_reg(mx3fb, reg | SDC_COM_GLB_A, SDC_COM_CONF);
+       } else {
+               reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+               mx3fb_write_reg(mx3fb, reg & ~SDC_COM_GLB_A, SDC_COM_CONF);
+       }
+
+       spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
+
+       return 0;
+}
+
+static void sdc_set_brightness(struct mx3fb_data *mx3fb, uint8_t value)
+{
+       /* This might be board-specific */
+       mx3fb_write_reg(mx3fb, 0x03000000UL | value << 16, SDC_PWM_CTRL);
+       return;
+}
+
+static uint32_t bpp_to_pixfmt(int bpp)
+{
+       uint32_t pixfmt = 0;
+       switch (bpp) {
+       case 24:
+               pixfmt = IPU_PIX_FMT_BGR24;
+               break;
+       case 32:
+               pixfmt = IPU_PIX_FMT_BGR32;
+               break;
+       case 16:
+               pixfmt = IPU_PIX_FMT_RGB565;
+               break;
+       }
+       return pixfmt;
+}
+
+static int mx3fb_blank(int blank, struct fb_info *fbi);
+static int mx3fb_map_video_memory(struct fb_info *fbi);
+static int mx3fb_unmap_video_memory(struct fb_info *fbi);
+
+/**
+ * mx3fb_set_fix() - set fixed framebuffer parameters from variable settings.
+ * @info:      framebuffer information pointer
+ * @return:    0 on success or negative error code on failure.
+ */
+static int mx3fb_set_fix(struct fb_info *fbi)
+{
+       struct fb_fix_screeninfo *fix = &fbi->fix;
+       struct fb_var_screeninfo *var = &fbi->var;
+
+       strncpy(fix->id, "DISP3 BG", 8);
+
+       fix->line_length = var->xres_virtual * var->bits_per_pixel / 8;
+
+       fix->type = FB_TYPE_PACKED_PIXELS;
+       fix->accel = FB_ACCEL_NONE;
+       fix->visual = FB_VISUAL_TRUECOLOR;
+       fix->xpanstep = 1;
+       fix->ypanstep = 1;
+
+       return 0;
+}
+
+static void mx3fb_dma_done(void *arg)
+{
+       struct idmac_tx_desc *tx_desc = to_tx_desc(arg);
+       struct dma_chan *chan = tx_desc->txd.chan;
+       struct idmac_channel *ichannel = to_idmac_chan(chan);
+       struct mx3fb_data *mx3fb = ichannel->client;
+       struct mx3fb_info *mx3_fbi = mx3fb->fbi->par;
+
+       dev_dbg(mx3fb->dev, "irq %d callback\n", ichannel->eof_irq);
+
+       /* We only need one interrupt, it will be re-enabled as needed */
+       disable_irq(ichannel->eof_irq);
+
+       complete(&mx3_fbi->flip_cmpl);
+}
+
+/**
+ * mx3fb_set_par() - set framebuffer parameters and change the operating mode.
+ * @fbi:       framebuffer information pointer.
+ * @return:    0 on success or negative error code on failure.
+ */
+static int mx3fb_set_par(struct fb_info *fbi)
+{
+       u32 mem_len;
+       struct ipu_di_signal_cfg sig_cfg;
+       enum ipu_panel mode = IPU_PANEL_TFT;
+       struct mx3fb_info *mx3_fbi = fbi->par;
+       struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+       struct idmac_channel *ichan = mx3_fbi->idmac_channel;
+       struct idmac_video_param *video = &ichan->params.video;
+       struct scatterlist *sg = mx3_fbi->sg;
+       size_t screen_size;
+
+       dev_dbg(mx3fb->dev, "%s [%c]\n", __func__, list_empty(&ichan->queue) ? '-' : '+');
+
+       mutex_lock(&mx3_fbi->mutex);
+
+       /* Total cleanup */
+       if (mx3_fbi->txd)
+               sdc_disable_channel(mx3_fbi);
+
+       mx3fb_set_fix(fbi);
+
+       mem_len = fbi->var.yres_virtual * fbi->fix.line_length;
+       if (mem_len > fbi->fix.smem_len) {
+               if (fbi->fix.smem_start)
+                       mx3fb_unmap_video_memory(fbi);
+
+               fbi->fix.smem_len = mem_len;
+               if (mx3fb_map_video_memory(fbi) < 0) {
+                       mutex_unlock(&mx3_fbi->mutex);
+                       return -ENOMEM;
+               }
+       }
+
+       screen_size = fbi->fix.line_length * fbi->var.yres;
+
+       sg_init_table(&sg[0], 1);
+       sg_init_table(&sg[1], 1);
+
+       sg_dma_address(&sg[0])  = fbi->fix.smem_start;
+       sg_set_page(&sg[0], virt_to_page(fbi->screen_base),
+                   fbi->fix.smem_len,
+                   offset_in_page(fbi->screen_base));
+
+       if (mx3_fbi->ipu_ch == IDMAC_SDC_0) {
+               memset(&sig_cfg, 0, sizeof(sig_cfg));
+               if (fbi->var.sync & FB_SYNC_HOR_HIGH_ACT)
+                       sig_cfg.Hsync_pol = true;
+               if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT)
+                       sig_cfg.Vsync_pol = true;
+               if (fbi->var.sync & FB_SYNC_CLK_INVERT)
+                       sig_cfg.clk_pol = true;
+               if (fbi->var.sync & FB_SYNC_DATA_INVERT)
+                       sig_cfg.data_pol = true;
+               if (fbi->var.sync & FB_SYNC_OE_ACT_HIGH)
+                       sig_cfg.enable_pol = true;
+               if (fbi->var.sync & FB_SYNC_CLK_IDLE_EN)
+                       sig_cfg.clkidle_en = true;
+               if (fbi->var.sync & FB_SYNC_CLK_SEL_EN)
+                       sig_cfg.clksel_en = true;
+               if (fbi->var.sync & FB_SYNC_SHARP_MODE)
+                       mode = IPU_PANEL_SHARP_TFT;
+
+               dev_dbg(fbi->device, "pixclock = %ul Hz\n",
+                       (u32) (PICOS2KHZ(fbi->var.pixclock) * 1000UL));
+
+               if (sdc_init_panel(mx3fb, mode,
+                                  (PICOS2KHZ(fbi->var.pixclock)) * 1000UL,
+                                  fbi->var.xres, fbi->var.yres,
+                                  (fbi->var.sync & FB_SYNC_SWAP_RGB) ?
+                                  IPU_PIX_FMT_BGR666 : IPU_PIX_FMT_RGB666,
+                                  fbi->var.left_margin,
+                                  fbi->var.hsync_len,
+                                  fbi->var.right_margin +
+                                  fbi->var.hsync_len,
+                                  fbi->var.upper_margin,
+                                  fbi->var.vsync_len,
+                                  fbi->var.lower_margin +
+                                  fbi->var.vsync_len, sig_cfg) != 0) {
+                       mutex_unlock(&mx3_fbi->mutex);
+                       dev_err(fbi->device,
+                               "mx3fb: Error initializing panel.\n");
+                       return -EINVAL;
+               }
+       }
+
+       sdc_set_window_pos(mx3fb, mx3_fbi->ipu_ch, 0, 0);
+
+       mx3_fbi->cur_ipu_buf    = 0;
+
+       video->out_pixel_fmt    = bpp_to_pixfmt(fbi->var.bits_per_pixel);
+       video->out_width        = fbi->var.xres;
+       video->out_height       = fbi->var.yres;
+       video->out_stride       = fbi->var.xres_virtual;
+
+       if (mx3_fbi->blank == FB_BLANK_UNBLANK)
+               sdc_enable_channel(mx3_fbi);
+
+       mutex_unlock(&mx3_fbi->mutex);
+
+       return 0;
+}
+
+/**
+ * mx3fb_check_var() - check and adjust framebuffer variable parameters.
+ * @var:       framebuffer variable parameters
+ * @fbi:       framebuffer information pointer
+ */
+static int mx3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi)
+{
+       struct mx3fb_info *mx3_fbi = fbi->par;
+       u32 vtotal;
+       u32 htotal;
+
+       dev_dbg(fbi->device, "%s\n", __func__);
+
+       if (var->xres_virtual < var->xres)
+               var->xres_virtual = var->xres;
+       if (var->yres_virtual < var->yres)
+               var->yres_virtual = var->yres;
+
+       if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) &&
+           (var->bits_per_pixel != 16))
+               var->bits_per_pixel = default_bpp;
+
+       switch (var->bits_per_pixel) {
+       case 16:
+               var->red.length = 5;
+               var->red.offset = 11;
+               var->red.msb_right = 0;
+
+               var->green.length = 6;
+               var->green.offset = 5;
+               var->green.msb_right = 0;
+
+               var->blue.length = 5;
+               var->blue.offset = 0;
+               var->blue.msb_right = 0;
+
+               var->transp.length = 0;
+               var->transp.offset = 0;
+               var->transp.msb_right = 0;
+               break;
+       case 24:
+               var->red.length = 8;
+               var->red.offset = 16;
+               var->red.msb_right = 0;
+
+               var->green.length = 8;
+               var->green.offset = 8;
+               var->green.msb_right = 0;
+
+               var->blue.length = 8;
+               var->blue.offset = 0;
+               var->blue.msb_right = 0;
+
+               var->transp.length = 0;
+               var->transp.offset = 0;
+               var->transp.msb_right = 0;
+               break;
+       case 32:
+               var->red.length = 8;
+               var->red.offset = 16;
+               var->red.msb_right = 0;
+
+               var->green.length = 8;
+               var->green.offset = 8;
+               var->green.msb_right = 0;
+
+               var->blue.length = 8;
+               var->blue.offset = 0;
+               var->blue.msb_right = 0;
+
+               var->transp.length = 8;
+               var->transp.offset = 24;
+               var->transp.msb_right = 0;
+               break;
+       }
+
+       if (var->pixclock < 1000) {
+               htotal = var->xres + var->right_margin + var->hsync_len +
+                   var->left_margin;
+               vtotal = var->yres + var->lower_margin + var->vsync_len +
+                   var->upper_margin;
+               var->pixclock = (vtotal * htotal * 6UL) / 100UL;
+               var->pixclock = KHZ2PICOS(var->pixclock);
+               dev_dbg(fbi->device, "pixclock set for 60Hz refresh = %u ps\n",
+                       var->pixclock);
+       }
+
+       var->height = -1;
+       var->width = -1;
+       var->grayscale = 0;
+
+       /* Preserve sync flags */
+       var->sync |= mx3_fbi->sync;
+       mx3_fbi->sync |= var->sync;
+
+       return 0;
+}
+
+static u32 chan_to_field(unsigned int chan, struct fb_bitfield *bf)
+{
+       chan &= 0xffff;
+       chan >>= 16 - bf->length;
+       return chan << bf->offset;
+}
+
+static int mx3fb_setcolreg(unsigned int regno, unsigned int red,
+                          unsigned int green, unsigned int blue,
+                          unsigned int trans, struct fb_info *fbi)
+{
+       struct mx3fb_info *mx3_fbi = fbi->par;
+       u32 val;
+       int ret = 1;
+
+       dev_dbg(fbi->device, "%s\n", __func__);
+
+       mutex_lock(&mx3_fbi->mutex);
+       /*
+        * If greyscale is true, then we convert the RGB value
+        * to greyscale no matter what visual we are using.
+        */
+       if (fbi->var.grayscale)
+               red = green = blue = (19595 * red + 38470 * green +
+                                     7471 * blue) >> 16;
+       switch (fbi->fix.visual) {
+       case FB_VISUAL_TRUECOLOR:
+               /*
+                * 16-bit True Colour.  We encode the RGB value
+                * according to the RGB bitfield information.
+                */
+               if (regno < 16) {
+                       u32 *pal = fbi->pseudo_palette;
+
+                       val = chan_to_field(red, &fbi->var.red);
+                       val |= chan_to_field(green, &fbi->var.green);
+                       val |= chan_to_field(blue, &fbi->var.blue);
+
+                       pal[regno] = val;
+
+                       ret = 0;
+               }
+               break;
+
+       case FB_VISUAL_STATIC_PSEUDOCOLOR:
+       case FB_VISUAL_PSEUDOCOLOR:
+               break;
+       }
+       mutex_unlock(&mx3_fbi->mutex);
+
+       return ret;
+}
+
+/**
+ * mx3fb_blank() - blank the display.
+ */
+static int mx3fb_blank(int blank, struct fb_info *fbi)
+{
+       struct mx3fb_info *mx3_fbi = fbi->par;
+       struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+
+       dev_dbg(fbi->device, "%s\n", __func__);
+
+       dev_dbg(fbi->device, "blank = %d\n", blank);
+
+       if (mx3_fbi->blank == blank)
+               return 0;
+
+       mutex_lock(&mx3_fbi->mutex);
+       mx3_fbi->blank = blank;
+
+       switch (blank) {
+       case FB_BLANK_POWERDOWN:
+       case FB_BLANK_VSYNC_SUSPEND:
+       case FB_BLANK_HSYNC_SUSPEND:
+       case FB_BLANK_NORMAL:
+               sdc_disable_channel(mx3_fbi);
+               sdc_set_brightness(mx3fb, 0);
+               break;
+       case FB_BLANK_UNBLANK:
+               sdc_enable_channel(mx3_fbi);
+               sdc_set_brightness(mx3fb, mx3fb->backlight_level);
+               break;
+       }
+       mutex_unlock(&mx3_fbi->mutex);
+
+       return 0;
+}
+
+/**
+ * mx3fb_pan_display() - pan or wrap the display
+ * @var:       variable screen buffer information.
+ * @info:      framebuffer information pointer.
+ *
+ * We look only at xoffset, yoffset and the FB_VMODE_YWRAP flag
+ */
+static int mx3fb_pan_display(struct fb_var_screeninfo *var,
+                            struct fb_info *fbi)
+{
+       struct mx3fb_info *mx3_fbi = fbi->par;
+       u32 y_bottom;
+       unsigned long base;
+       off_t offset;
+       dma_cookie_t cookie;
+       struct scatterlist *sg = mx3_fbi->sg;
+       struct dma_chan *dma_chan = &mx3_fbi->idmac_channel->dma_chan;
+       struct dma_async_tx_descriptor *txd;
+       int ret;
+
+       dev_dbg(fbi->device, "%s [%c]\n", __func__,
+               list_empty(&mx3_fbi->idmac_channel->queue) ? '-' : '+');
+
+       if (var->xoffset > 0) {
+               dev_dbg(fbi->device, "x panning not supported\n");
+               return -EINVAL;
+       }
+
+       if (fbi->var.xoffset == var->xoffset &&
+           fbi->var.yoffset == var->yoffset)
+               return 0;       /* No change, do nothing */
+
+       y_bottom = var->yoffset;
+
+       if (!(var->vmode & FB_VMODE_YWRAP))
+               y_bottom += var->yres;
+
+       if (y_bottom > fbi->var.yres_virtual)
+               return -EINVAL;
+
+       mutex_lock(&mx3_fbi->mutex);
+
+       offset = (var->yoffset * var->xres_virtual + var->xoffset) *
+               (var->bits_per_pixel / 8);
+       base = fbi->fix.smem_start + offset;
+
+       dev_dbg(fbi->device, "Updating SDC BG buf %d address=0x%08lX\n",
+               mx3_fbi->cur_ipu_buf, base);
+
+       /*
+        * We enable the End of Frame interrupt, which will free a tx-descriptor,
+        * which we will need for the next device_prep_slave_sg(). The
+        * IRQ-handler will disable the IRQ again.
+        */
+       init_completion(&mx3_fbi->flip_cmpl);
+       enable_irq(mx3_fbi->idmac_channel->eof_irq);
+
+       ret = wait_for_completion_timeout(&mx3_fbi->flip_cmpl, HZ / 10);
+       if (ret <= 0) {
+               mutex_unlock(&mx3_fbi->mutex);
+               dev_info(fbi->device, "Panning failed due to %s\n", ret < 0 ?
+                        "user interrupt" : "timeout");
+               return ret ? : -ETIMEDOUT;
+       }
+
+       mx3_fbi->cur_ipu_buf = !mx3_fbi->cur_ipu_buf;
+
+       sg_dma_address(&sg[mx3_fbi->cur_ipu_buf]) = base;
+       sg_set_page(&sg[mx3_fbi->cur_ipu_buf],
+                   virt_to_page(fbi->screen_base + offset), fbi->fix.smem_len,
+                   offset_in_page(fbi->screen_base + offset));
+
+       txd = dma_chan->device->device_prep_slave_sg(dma_chan, sg +
+               mx3_fbi->cur_ipu_buf, 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT);
+       if (!txd) {
+               dev_err(fbi->device,
+                       "Error preparing a DMA transaction descriptor.\n");
+               mutex_unlock(&mx3_fbi->mutex);
+               return -EIO;
+       }
+
+       txd->callback_param     = txd;
+       txd->callback           = mx3fb_dma_done;
+
+       /*
+        * Emulate original mx3fb behaviour: each new call to idmac_tx_submit()
+        * should switch to another buffer
+        */
+       cookie = txd->tx_submit(txd);
+       dev_dbg(fbi->device, "%d: Submit %p #%d\n", __LINE__, txd, cookie);
+       if (cookie < 0) {
+               dev_err(fbi->device,
+                       "Error updating SDC buf %d to address=0x%08lX\n",
+                       mx3_fbi->cur_ipu_buf, base);
+               mutex_unlock(&mx3_fbi->mutex);
+               return -EIO;
+       }
+
+       if (mx3_fbi->txd)
+               async_tx_ack(mx3_fbi->txd);
+       mx3_fbi->txd = txd;
+
+       fbi->var.xoffset = var->xoffset;
+       fbi->var.yoffset = var->yoffset;
+
+       if (var->vmode & FB_VMODE_YWRAP)
+               fbi->var.vmode |= FB_VMODE_YWRAP;
+       else
+               fbi->var.vmode &= ~FB_VMODE_YWRAP;
+
+       mutex_unlock(&mx3_fbi->mutex);
+
+       dev_dbg(fbi->device, "Update complete\n");
+
+       return 0;
+}
+
+/*
+ * This structure contains the pointers to the control functions that are
+ * invoked by the core framebuffer driver to perform operations like
+ * blitting, rectangle filling, copy regions and cursor definition.
+ */
+static struct fb_ops mx3fb_ops = {
+       .owner = THIS_MODULE,
+       .fb_set_par = mx3fb_set_par,
+       .fb_check_var = mx3fb_check_var,
+       .fb_setcolreg = mx3fb_setcolreg,
+       .fb_pan_display = mx3fb_pan_display,
+       .fb_fillrect = cfb_fillrect,
+       .fb_copyarea = cfb_copyarea,
+       .fb_imageblit = cfb_imageblit,
+       .fb_blank = mx3fb_blank,
+};
+
+#ifdef CONFIG_PM
+/*
+ * Power management hooks.      Note that we won't be called from IRQ context,
+ * unlike the blank functions above, so we may sleep.
+ */
+
+/*
+ * Suspends the framebuffer and blanks the screen. Power management support
+ */
+static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state)
+{
+       struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
+       struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
+
+       acquire_console_sem();
+       fb_set_suspend(drv_data->fbi, 1);
+       release_console_sem();
+
+       if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
+               sdc_disable_channel(mx3_fbi);
+               sdc_set_brightness(mx3fb, 0);
+
+       }
+       return 0;
+}
+
+/*
+ * Resumes the framebuffer and unblanks the screen. Power management support
+ */
+static int mx3fb_resume(struct platform_device *pdev)
+{
+       struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
+       struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
+
+       if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
+               sdc_enable_channel(mx3_fbi);
+               sdc_set_brightness(mx3fb, drv_data->backlight_level);
+       }
+
+       acquire_console_sem();
+       fb_set_suspend(drv_data->fbi, 0);
+       release_console_sem();
+
+       return 0;
+}
+#else
+#define mx3fb_suspend   NULL
+#define mx3fb_resume    NULL
+#endif
+
+/*
+ * Main framebuffer functions
+ */
+
+/**
+ * mx3fb_map_video_memory() - allocates the DRAM memory for the frame buffer.
+ * @fbi:       framebuffer information pointer
+ * @return:    Error code indicating success or failure
+ *
+ * This buffer is remapped into a non-cached, non-buffered, memory region to
+ * allow palette and pixel writes to occur without flushing the cache. Once this
+ * area is remapped, all virtual memory access to the video memory should occur
+ * at the new region.
+ */
+static int mx3fb_map_video_memory(struct fb_info *fbi)
+{
+       int retval = 0;
+       dma_addr_t addr;
+
+       fbi->screen_base = dma_alloc_writecombine(fbi->device,
+                                                 fbi->fix.smem_len,
+                                                 &addr, GFP_DMA);
+
+       if (!fbi->screen_base) {
+               dev_err(fbi->device, "Cannot allocate %u bytes framebuffer memory\n",
+                       fbi->fix.smem_len);
+               retval = -EBUSY;
+               goto err0;
+       }
+
+       fbi->fix.smem_start = addr;
+
+       dev_dbg(fbi->device, "allocated fb @ p=0x%08x, v=0x%p, size=%d.\n",
+               (uint32_t) fbi->fix.smem_start, fbi->screen_base, fbi->fix.smem_len);
+
+       fbi->screen_size = fbi->fix.smem_len;
+
+       /* Clear the screen */
+       memset((char *)fbi->screen_base, 0, fbi->fix.smem_len);
+
+       return 0;
+
+err0:
+       fbi->fix.smem_len = 0;
+       fbi->fix.smem_start = 0;
+       fbi->screen_base = NULL;
+       return retval;
+}
+
+/**
+ * mx3fb_unmap_video_memory() - de-allocate frame buffer memory.
+ * @fbi:       framebuffer information pointer
+ * @return:    error code indicating success or failure
+ */
+static int mx3fb_unmap_video_memory(struct fb_info *fbi)
+{
+       dma_free_writecombine(fbi->device, fbi->fix.smem_len,
+                             fbi->screen_base, fbi->fix.smem_start);
+
+       fbi->screen_base = 0;
+       fbi->fix.smem_start = 0;
+       fbi->fix.smem_len = 0;
+       return 0;
+}
+
+/**
+ * mx3fb_init_fbinfo() - initialize framebuffer information object.
+ * @return:    initialized framebuffer structure.
+ */
+static struct fb_info *mx3fb_init_fbinfo(struct device *dev, struct fb_ops *ops)
+{
+       struct fb_info *fbi;
+       struct mx3fb_info *mx3fbi;
+       int ret;
+
+       /* Allocate sufficient memory for the fb structure */
+       fbi = framebuffer_alloc(sizeof(struct mx3fb_info), dev);
+       if (!fbi)
+               return NULL;
+
+       mx3fbi                  = fbi->par;
+       mx3fbi->cookie          = -EINVAL;
+       mx3fbi->cur_ipu_buf     = 0;
+
+       fbi->var.activate       = FB_ACTIVATE_NOW;
+
+       fbi->fbops              = ops;
+       fbi->flags              = FBINFO_FLAG_DEFAULT;
+       fbi->pseudo_palette     = mx3fbi->pseudo_palette;
+
+       mutex_init(&mx3fbi->mutex);
+
+       /* Allocate colormap */
+       ret = fb_alloc_cmap(&fbi->cmap, 16, 0);
+       if (ret < 0) {
+               framebuffer_release(fbi);
+               return NULL;
+       }
+
+       return fbi;
+}
+
+static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
+{
+       struct device *dev = mx3fb->dev;
+       struct mx3fb_platform_data *mx3fb_pdata = dev->platform_data;
+       const char *name = mx3fb_pdata->name;
+       unsigned int irq;
+       struct fb_info *fbi;
+       struct mx3fb_info *mx3fbi;
+       const struct fb_videomode *mode;
+       int ret, num_modes;
+
+       ichan->client = mx3fb;
+       irq = ichan->eof_irq;
+
+       if (ichan->dma_chan.chan_id != IDMAC_SDC_0)
+               return -EINVAL;
+
+       fbi = mx3fb_init_fbinfo(dev, &mx3fb_ops);
+       if (!fbi)
+               return -ENOMEM;
+
+       if (!fb_mode)
+               fb_mode = name;
+
+       if (!fb_mode) {
+               ret = -EINVAL;
+               goto emode;
+       }
+
+       if (mx3fb_pdata->mode && mx3fb_pdata->num_modes) {
+               mode = mx3fb_pdata->mode;
+               num_modes = mx3fb_pdata->num_modes;
+       } else {
+               mode = mx3fb_modedb;
+               num_modes = ARRAY_SIZE(mx3fb_modedb);
+       }
+
+       if (!fb_find_mode(&fbi->var, fbi, fb_mode, mode,
+                         num_modes, NULL, default_bpp)) {
+               ret = -EBUSY;
+               goto emode;
+       }
+
+       fb_videomode_to_modelist(mode, num_modes, &fbi->modelist);
+
+       /* Default Y virtual size is 2x panel size */
+       fbi->var.yres_virtual = fbi->var.yres * 2;
+
+       mx3fb->fbi = fbi;
+
+       /* set Display Interface clock period */
+       mx3fb_write_reg(mx3fb, 0x00100010L, DI_HSP_CLK_PER);
+       /* Might need to trigger HSP clock change - see 44.3.3.8.5 */
+
+       sdc_set_brightness(mx3fb, 255);
+       sdc_set_global_alpha(mx3fb, true, 0xFF);
+       sdc_set_color_key(mx3fb, IDMAC_SDC_0, false, 0);
+
+       mx3fbi                  = fbi->par;
+       mx3fbi->idmac_channel   = ichan;
+       mx3fbi->ipu_ch          = ichan->dma_chan.chan_id;
+       mx3fbi->mx3fb           = mx3fb;
+       mx3fbi->blank           = FB_BLANK_NORMAL;
+
+       init_completion(&mx3fbi->flip_cmpl);
+       disable_irq(ichan->eof_irq);
+       dev_dbg(mx3fb->dev, "disabling irq %d\n", ichan->eof_irq);
+       ret = mx3fb_set_par(fbi);
+       if (ret < 0)
+               goto esetpar;
+
+       mx3fb_blank(FB_BLANK_UNBLANK, fbi);
+
+       dev_info(dev, "mx3fb: fb registered, using mode %s\n", fb_mode);
+
+       ret = register_framebuffer(fbi);
+       if (ret < 0)
+               goto erfb;
+
+       return 0;
+
+erfb:
+esetpar:
+emode:
+       fb_dealloc_cmap(&fbi->cmap);
+       framebuffer_release(fbi);
+
+       return ret;
+}
+
+static bool chan_filter(struct dma_chan *chan, void *arg)
+{
+       struct dma_chan_request *rq = arg;
+       struct device *dev;
+       struct mx3fb_platform_data *mx3fb_pdata;
+
+       if (!rq)
+               return false;
+
+       dev = rq->mx3fb->dev;
+       mx3fb_pdata = dev->platform_data;
+
+       return rq->id == chan->chan_id &&
+               mx3fb_pdata->dma_dev == chan->device->dev;
+}
+
+static void release_fbi(struct fb_info *fbi)
+{
+       mx3fb_unmap_video_memory(fbi);
+
+       fb_dealloc_cmap(&fbi->cmap);
+
+       unregister_framebuffer(fbi);
+       framebuffer_release(fbi);
+}
+
+static int mx3fb_probe(struct platform_device *pdev)
+{
+       struct device *dev = &pdev->dev;
+       int ret;
+       struct resource *sdc_reg;
+       struct mx3fb_data *mx3fb;
+       dma_cap_mask_t mask;
+       struct dma_chan *chan;
+       struct dma_chan_request rq;
+
+       /*
+        * Display Interface (DI) and Synchronous Display Controller (SDC)
+        * registers
+        */
+       sdc_reg = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       if (!sdc_reg)
+               return -EINVAL;
+
+       mx3fb = kzalloc(sizeof(*mx3fb), GFP_KERNEL);
+       if (!mx3fb)
+               return -ENOMEM;
+
+       spin_lock_init(&mx3fb->lock);
+
+       mx3fb->reg_base = ioremap(sdc_reg->start, resource_size(sdc_reg));
+       if (!mx3fb->reg_base) {
+               ret = -ENOMEM;
+               goto eremap;
+       }
+
+       pr_debug("Remapped %x to %x at %p\n", sdc_reg->start, sdc_reg->end,
+                mx3fb->reg_base);
+
+       /* IDMAC interface */
+       dmaengine_get();
+
+       mx3fb->dev = dev;
+       platform_set_drvdata(pdev, mx3fb);
+
+       rq.mx3fb = mx3fb;
+
+       dma_cap_zero(mask);
+       dma_cap_set(DMA_SLAVE, mask);
+       dma_cap_set(DMA_PRIVATE, mask);
+       rq.id = IDMAC_SDC_0;
+       chan = dma_request_channel(mask, chan_filter, &rq);
+       if (!chan) {
+               ret = -EBUSY;
+               goto ersdc0;
+       }
+
+       ret = init_fb_chan(mx3fb, to_idmac_chan(chan));
+       if (ret < 0)
+               goto eisdc0;
+
+       mx3fb->backlight_level = 255;
+
+       return 0;
+
+eisdc0:
+       dma_release_channel(chan);
+ersdc0:
+       dmaengine_put();
+       iounmap(mx3fb->reg_base);
+eremap:
+       kfree(mx3fb);
+       dev_err(dev, "mx3fb: failed to register fb\n");
+       return ret;
+}
+
+static int mx3fb_remove(struct platform_device *dev)
+{
+       struct mx3fb_data *mx3fb = platform_get_drvdata(dev);
+       struct fb_info *fbi = mx3fb->fbi;
+       struct mx3fb_info *mx3_fbi = fbi->par;
+       struct dma_chan *chan;
+
+       chan = &mx3_fbi->idmac_channel->dma_chan;
+       release_fbi(fbi);
+
+       dma_release_channel(chan);
+       dmaengine_put();
+
+       iounmap(mx3fb->reg_base);
+       kfree(mx3fb);
+       return 0;
+}
+
+static struct platform_driver mx3fb_driver = {
+       .driver = {
+                  .name = MX3FB_NAME,
+       },
+       .probe = mx3fb_probe,
+       .remove = mx3fb_remove,
+       .suspend = mx3fb_suspend,
+       .resume = mx3fb_resume,
+};
+
+/*
+ * Parse user specified options (`video=mx3fb:')
+ * example:
+ *     video=mx3fb:bpp=16
+ */
+static int mx3fb_setup(void)
+{
+#ifndef MODULE
+       char *opt, *options = NULL;
+
+       if (fb_get_options("mx3fb", &options))
+               return -ENODEV;
+
+       if (!options || !*options)
+               return 0;
+
+       while ((opt = strsep(&options, ",")) != NULL) {
+               if (!*opt)
+                       continue;
+               if (!strncmp(opt, "bpp=", 4))
+                       default_bpp = simple_strtoul(opt + 4, NULL, 0);
+               else
+                       fb_mode = opt;
+       }
+#endif
+
+       return 0;
+}
+
+static int __init mx3fb_init(void)
+{
+       int ret = mx3fb_setup();
+
+       if (ret < 0)
+               return ret;
+
+       ret = platform_driver_register(&mx3fb_driver);
+       return ret;
+}
+
+static void __exit mx3fb_exit(void)
+{
+       platform_driver_unregister(&mx3fb_driver);
+}
+
+module_init(mx3fb_init);
+module_exit(mx3fb_exit);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("MX3 framebuffer driver");
+MODULE_ALIAS("platform:" MX3FB_NAME);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/video/nvidia/nv_i2c.c b/drivers/video/nvidia/nv_i2c.c
index 6fd7cb8..6aaddb4 100644
--- a/drivers/video/nvidia/nv_i2c.c
+++ b/drivers/video/nvidia/nv_i2c.c
@@ -87,7 +87,6 @@
 
 	strcpy(chan->adapter.name, name);
 	chan->adapter.owner = THIS_MODULE;
-	chan->adapter.id = I2C_HW_B_NVIDIA;
 	chan->adapter.class = i2c_class;
 	chan->adapter.algo_data = &chan->algo;
 	chan->adapter.dev.parent = &chan->par->pci_dev->dev;
diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c
index 6e2ea75..ab39492 100644
--- a/drivers/video/omap/lcdc.c
+++ b/drivers/video/omap/lcdc.c
@@ -800,14 +800,14 @@
 	/* FIXME:
 	 * According to errata some platforms have a clock rate limitiation
 	 */
-	lcdc.lcd_ck = clk_get(NULL, "lcd_ck");
+	lcdc.lcd_ck = clk_get(fbdev->dev, "lcd_ck");
 	if (IS_ERR(lcdc.lcd_ck)) {
 		dev_err(fbdev->dev, "unable to access LCD clock\n");
 		r = PTR_ERR(lcdc.lcd_ck);
 		goto fail0;
 	}
 
-	tc_ck = clk_get(NULL, "tc_ck");
+	tc_ck = clk_get(fbdev->dev, "tc_ck");
 	if (IS_ERR(tc_ck)) {
 		dev_err(fbdev->dev, "unable to access TC clock\n");
 		r = PTR_ERR(tc_ck);
diff --git a/drivers/video/ps3fb.c b/drivers/video/ps3fb.c
index 38ac805..87f826e 100644
--- a/drivers/video/ps3fb.c
+++ b/drivers/video/ps3fb.c
@@ -1006,7 +1006,7 @@
 			__func__, status);
 		return -ENXIO;
 	}
-	dev_dbg(dev, "video:%p ioif:%lx lpar:%lx size:%lx\n",
+	dev_dbg(dev, "video:%p ioif:%lx lpar:%llx size:%lx\n",
 		ps3fb_videomemory.address, GPU_IOIF, xdr_lpar,
 		ps3fb_videomemory.size);
 
@@ -1133,7 +1133,7 @@
 			__func__, status);
 		goto err;
 	}
-	dev_dbg(&dev->core, "ddr:lpar:0x%lx\n", ddr_lpar);
+	dev_dbg(&dev->core, "ddr:lpar:0x%llx\n", ddr_lpar);
 
 	status = lv1_gpu_context_allocate(ps3fb.memory_handle, 0,
 					  &ps3fb.context_handle,
diff --git a/drivers/video/savage/savagefb-i2c.c b/drivers/video/savage/savagefb-i2c.c
index 783d4ad..574b29e 100644
--- a/drivers/video/savage/savagefb-i2c.c
+++ b/drivers/video/savage/savagefb-i2c.c
@@ -137,7 +137,6 @@
 	if (chan->par) {
 		strcpy(chan->adapter.name, name);
 		chan->adapter.owner		= THIS_MODULE;
-		chan->adapter.id		= I2C_HW_B_SAVAGE;
 		chan->adapter.algo_data		= &chan->algo;
 		chan->adapter.dev.parent	= &chan->par->pcidev->dev;
 		chan->algo.udelay		= 10;
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 3efa12f..09a3d55 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -187,10 +187,10 @@
 
 config OMAP_WATCHDOG
 	tristate "OMAP Watchdog"
-	depends on ARCH_OMAP16XX || ARCH_OMAP24XX
+	depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
 	help
-	  Support for TI OMAP1610/OMAP1710/OMAP2420 watchdog.  Say 'Y' here to
-	  enable the OMAP1610/OMAP1710 watchdog timer.
+	  Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog.  Say 'Y'
+	  here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog timer.
 
 config PNX4008_WATCHDOG
 	tristate "PNX4008 Watchdog"
diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c
index 993e5f5..5531691 100644
--- a/drivers/watchdog/at91rm9200_wdt.c
+++ b/drivers/watchdog/at91rm9200_wdt.c
@@ -13,6 +13,7 @@
 #include <linux/errno.h>
 #include <linux/fs.h>
 #include <linux/init.h>
+#include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/miscdevice.h>
 #include <linux/module.h>
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index 8dc7109..2ba8f95 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -298,6 +298,14 @@
 		frame_list[i] = pfn_to_mfn(pfn);
 
 		scrub_page(page);
+
+		if (!PageHighMem(page)) {
+			ret = HYPERVISOR_update_va_mapping(
+				(unsigned long)__va(pfn << PAGE_SHIFT),
+				__pte_ma(0), 0);
+			BUG_ON(ret);
+                }
+
 	}
 
 	/* Ensure that ballooned highmem pages don't have kmaps. */
diff --git a/drivers/xen/xenfs/xenbus.c b/drivers/xen/xenfs/xenbus.c
index 875a4c5..a9592d9 100644
--- a/drivers/xen/xenfs/xenbus.c
+++ b/drivers/xen/xenfs/xenbus.c
@@ -291,7 +291,7 @@
 static int xenbus_write_transaction(unsigned msg_type,
 				    struct xenbus_file_priv *u)
 {
-	int rc, ret;
+	int rc;
 	void *reply;
 	struct xenbus_transaction_holder *trans = NULL;
 	LIST_HEAD(staging_q);
@@ -326,15 +326,14 @@
 	}
 
 	mutex_lock(&u->reply_mutex);
-	ret = queue_reply(&staging_q, &u->u.msg, sizeof(u->u.msg));
-	if (!ret)
-		ret = queue_reply(&staging_q, reply, u->u.msg.len);
-	if (!ret) {
+	rc = queue_reply(&staging_q, &u->u.msg, sizeof(u->u.msg));
+	if (!rc)
+		rc = queue_reply(&staging_q, reply, u->u.msg.len);
+	if (!rc) {
 		list_splice_tail(&staging_q, &u->read_buffers);
 		wake_up(&u->read_waitq);
 	} else {
 		queue_cleanup(&staging_q);
-		rc = ret;
 	}
 	mutex_unlock(&u->reply_mutex);
 
diff --git a/fs/9p/Kconfig b/fs/9p/Kconfig
new file mode 100644
index 0000000..74e0723
--- /dev/null
+++ b/fs/9p/Kconfig
@@ -0,0 +1,10 @@
+config 9P_FS
+	tristate "Plan 9 Resource Sharing Support (9P2000) (Experimental)"
+	depends on INET && NET_9P && EXPERIMENTAL
+	help
+	  If you say Y here, you will get experimental support for
+	  Plan 9 resource sharing via the 9P2000 protocol.
+
+	  See <http://v9fs.sf.net> for more information.
+
+	  If unsure, say N.
diff --git a/fs/Kconfig b/fs/Kconfig
index 51307b0..93945dd 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -27,141 +27,8 @@
 	default y if EXT4_FS=y && EXT4_FS_XATTR
 	default m if EXT2_FS_XATTR || EXT3_FS_XATTR || EXT4_FS_XATTR
 
-config REISERFS_FS
-	tristate "Reiserfs support"
-	help
-	  Stores not just filenames but the files themselves in a balanced
-	  tree.  Uses journalling.
-
-	  Balanced trees are more efficient than traditional file system
-	  architectural foundations.
-
-	  In general, ReiserFS is as fast as ext2, but is very efficient with
-	  large directories and small files.  Additional patches are needed
-	  for NFS and quotas, please see <http://www.namesys.com/> for links.
-
-	  It is more easily extended to have features currently found in
-	  database and keyword search systems than block allocation based file
-	  systems are.  The next version will be so extended, and will support
-	  plugins consistent with our motto ``It takes more than a license to
-	  make source code open.''
-
-	  Read <http://www.namesys.com/> to learn more about reiserfs.
-
-	  Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com.
-
-	  If you like it, you can pay us to add new features to it that you
-	  need, buy a support contract, or pay us to port it to another OS.
-
-config REISERFS_CHECK
-	bool "Enable reiserfs debug mode"
-	depends on REISERFS_FS
-	help
-	  If you set this to Y, then ReiserFS will perform every check it can
-	  possibly imagine of its internal consistency throughout its
-	  operation.  It will also go substantially slower.  More than once we
-	  have forgotten that this was on, and then gone despondent over the
-	  latest benchmarks.:-) Use of this option allows our team to go all
-	  out in checking for consistency when debugging without fear of its
-	  effect on end users.  If you are on the verge of sending in a bug
-	  report, say Y and you might get a useful error message.  Almost
-	  everyone should say N.
-
-config REISERFS_PROC_INFO
-	bool "Stats in /proc/fs/reiserfs"
-	depends on REISERFS_FS && PROC_FS
-	help
-	  Create under /proc/fs/reiserfs a hierarchy of files, displaying
-	  various ReiserFS statistics and internal data at the expense of
-	  making your kernel or module slightly larger (+8 KB). This also
-	  increases the amount of kernel memory required for each mount.
-	  Almost everyone but ReiserFS developers and people fine-tuning
-	  reiserfs or tracing problems should say N.
-
-config REISERFS_FS_XATTR
-	bool "ReiserFS extended attributes"
-	depends on REISERFS_FS
-	help
-	  Extended attributes are name:value pairs associated with inodes by
-	  the kernel or by users (see the attr(5) manual page, or visit
-	  <http://acl.bestbits.at/> for details).
-
-	  If unsure, say N.
-
-config REISERFS_FS_POSIX_ACL
-	bool "ReiserFS POSIX Access Control Lists"
-	depends on REISERFS_FS_XATTR
-	select FS_POSIX_ACL
-	help
-	  Posix Access Control Lists (ACLs) support permissions for users and
-	  groups beyond the owner/group/world scheme.
-
-	  To learn more about Access Control Lists, visit the Posix ACLs for
-	  Linux website <http://acl.bestbits.at/>.
-
-	  If you don't know what Access Control Lists are, say N
-
-config REISERFS_FS_SECURITY
-	bool "ReiserFS Security Labels"
-	depends on REISERFS_FS_XATTR
-	help
-	  Security labels support alternative access control models
-	  implemented by security modules like SELinux.  This option
-	  enables an extended attribute handler for file security
-	  labels in the ReiserFS filesystem.
-
-	  If you are not using a security module that requires using
-	  extended attributes for file security labels, say N.
-
-config JFS_FS
-	tristate "JFS filesystem support"
-	select NLS
-	help
-	  This is a port of IBM's Journaled Filesystem .  More information is
-	  available in the file <file:Documentation/filesystems/jfs.txt>.
-
-	  If you do not intend to use the JFS filesystem, say N.
-
-config JFS_POSIX_ACL
-	bool "JFS POSIX Access Control Lists"
-	depends on JFS_FS
-	select FS_POSIX_ACL
-	help
-	  Posix Access Control Lists (ACLs) support permissions for users and
-	  groups beyond the owner/group/world scheme.
-
-	  To learn more about Access Control Lists, visit the Posix ACLs for
-	  Linux website <http://acl.bestbits.at/>.
-
-	  If you don't know what Access Control Lists are, say N
-
-config JFS_SECURITY
-	bool "JFS Security Labels"
-	depends on JFS_FS
-	help
-	  Security labels support alternative access control models
-	  implemented by security modules like SELinux.  This option
-	  enables an extended attribute handler for file security
-	  labels in the jfs filesystem.
-
-	  If you are not using a security module that requires using
-	  extended attributes for file security labels, say N.
-
-config JFS_DEBUG
-	bool "JFS debugging"
-	depends on JFS_FS
-	help
-	  If you are experiencing any problems with the JFS filesystem, say
-	  Y here.  This will result in additional debugging messages to be
-	  written to the system log.  Under normal circumstances, this
-	  results in very little overhead.
-
-config JFS_STATISTICS
-	bool "JFS statistics"
-	depends on JFS_FS
-	help
-	  Enabling this option will cause statistics from the JFS file system
-	  to be made available to the user in the /proc/fs/jfs/ directory.
+source "fs/reiserfs/Kconfig"
+source "fs/jfs/Kconfig"
 
 config FS_POSIX_ACL
 # Posix ACL utility routines (for now, only ext2/ext3/jfs/reiserfs/nfs4)
@@ -182,111 +49,8 @@
 
 source "fs/xfs/Kconfig"
 source "fs/gfs2/Kconfig"
-
-config OCFS2_FS
-	tristate "OCFS2 file system support"
-	depends on NET && SYSFS
-	select CONFIGFS_FS
-	select JBD2
-	select CRC32
-	select QUOTA
-	select QUOTA_TREE
-	help
-	  OCFS2 is a general purpose extent based shared disk cluster file
-	  system with many similarities to ext3. It supports 64 bit inode
-	  numbers, and has automatically extending metadata groups which may
-	  also make it attractive for non-clustered use.
-
-	  You'll want to install the ocfs2-tools package in order to at least
-	  get "mount.ocfs2".
-
-	  Project web page:    http://oss.oracle.com/projects/ocfs2
-	  Tools web page:      http://oss.oracle.com/projects/ocfs2-tools
-	  OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
-
-	  For more information on OCFS2, see the file
-	  <file:Documentation/filesystems/ocfs2.txt>.
-
-config OCFS2_FS_O2CB
-	tristate "O2CB Kernelspace Clustering"
-	depends on OCFS2_FS
-	default y
-	help
-	  OCFS2 includes a simple kernelspace clustering package, the OCFS2
-	  Cluster Base.  It only requires a very small userspace component
-	  to configure it. This comes with the standard ocfs2-tools package.
-	  O2CB is limited to maintaining a cluster for OCFS2 file systems.
-	  It cannot manage any other cluster applications.
-
-	  It is always safe to say Y here, as the clustering method is
-	  run-time selectable.
-
-config OCFS2_FS_USERSPACE_CLUSTER
-	tristate "OCFS2 Userspace Clustering"
-	depends on OCFS2_FS && DLM
-	default y
-	help
-	  This option will allow OCFS2 to use userspace clustering services
-	  in conjunction with the DLM in fs/dlm.  If you are using a
-	  userspace cluster manager, say Y here.
-
-	  It is safe to say Y, as the clustering method is run-time
-	  selectable.
-
-config OCFS2_FS_STATS
-	bool "OCFS2 statistics"
-	depends on OCFS2_FS
-	default y
-	help
-	  This option allows some fs statistics to be captured. Enabling
-	  this option may increase the memory consumption.
-
-config OCFS2_DEBUG_MASKLOG
-	bool "OCFS2 logging support"
-	depends on OCFS2_FS
-	default y
-	help
-	  The ocfs2 filesystem has an extensive logging system.  The system
-	  allows selection of events to log via files in /sys/o2cb/logmask/.
-	  This option will enlarge your kernel, but it allows debugging of
-	  ocfs2 filesystem issues.
-
-config OCFS2_DEBUG_FS
-	bool "OCFS2 expensive checks"
-	depends on OCFS2_FS
-	default n
-	help
-	  This option will enable expensive consistency checks. Enable
-	  this option for debugging only as it is likely to decrease
-	  performance of the filesystem.
-
-config OCFS2_FS_POSIX_ACL
-	bool "OCFS2 POSIX Access Control Lists"
-	depends on OCFS2_FS
-	select FS_POSIX_ACL
-	default n
-	help
-	  Posix Access Control Lists (ACLs) support permissions for users and
-	  groups beyond the owner/group/world scheme.
-
-config BTRFS_FS
-	tristate "Btrfs filesystem (EXPERIMENTAL) Unstable disk format"
-	depends on EXPERIMENTAL
-	select LIBCRC32C
-	select ZLIB_INFLATE
-	select ZLIB_DEFLATE
-	help
-	  Btrfs is a new filesystem with extents, writable snapshotting,
-	  support for multiple devices and many more features.
-
-	  Btrfs is highly experimental, and THE DISK FORMAT IS NOT YET
-	  FINALIZED.  You should say N here unless you are interested in
-	  testing Btrfs with non-critical data.
-
-	  To compile this file system support as a module, choose M here. The
-	  module will be called btrfs.
-
-	  If unsure, say N.
+source "fs/ocfs2/Kconfig"
+source "fs/btrfs/Kconfig"
 
 endif # BLOCK
 
@@ -348,64 +112,9 @@
 	depends on XFS_QUOTA || QUOTA
 	default y
 
-config AUTOFS_FS
-	tristate "Kernel automounter support"
-	help
-	  The automounter is a tool to automatically mount remote file systems
-	  on demand. This implementation is partially kernel-based to reduce
-	  overhead in the already-mounted case; this is unlike the BSD
-	  automounter (amd), which is a pure user space daemon.
-
-	  To use the automounter you need the user-space tools from the autofs
-	  package; you can find the location in <file:Documentation/Changes>.
-	  You also want to answer Y to "NFS file system support", below.
-
-	  If you want to use the newer version of the automounter with more
-	  features, say N here and say Y to "Kernel automounter v4 support",
-	  below.
-
-	  To compile this support as a module, choose M here: the module will be
-	  called autofs.
-
-	  If you are not a part of a fairly large, distributed network, you
-	  probably do not need an automounter, and can say N here.
-
-config AUTOFS4_FS
-	tristate "Kernel automounter version 4 support (also supports v3)"
-	help
-	  The automounter is a tool to automatically mount remote file systems
-	  on demand. This implementation is partially kernel-based to reduce
-	  overhead in the already-mounted case; this is unlike the BSD
-	  automounter (amd), which is a pure user space daemon.
-
-	  To use the automounter you need the user-space tools from
-	  <ftp://ftp.kernel.org/pub/linux/daemons/autofs/v4/>; you also
-	  want to answer Y to "NFS file system support", below.
-
-	  To compile this support as a module, choose M here: the module will be
-	  called autofs4.  You will need to add "alias autofs autofs4" to your
-	  modules configuration file.
-
-	  If you are not a part of a fairly large, distributed network or
-	  don't have a laptop which needs to dynamically reconfigure to the
-	  local network, you probably do not need an automounter, and can say
-	  N here.
-
-config FUSE_FS
-	tristate "FUSE (Filesystem in Userspace) support"
-	help
-	  With FUSE it is possible to implement a fully functional filesystem
-	  in a userspace program.
-
-	  There's also companion library: libfuse.  This library along with
-	  utilities is available from the FUSE homepage:
-	  <http://fuse.sourceforge.net/>
-
-	  See <file:Documentation/filesystems/fuse.txt> for more information.
-	  See <file:Documentation/Changes> for needed library/utility version.
-
-	  If you want to develop a userspace FS, or if you want to use
-	  a filesystem based on FUSE, answer Y or M.
+source "fs/autofs/Kconfig"
+source "fs/autofs4/Kconfig"
+source "fs/fuse/Kconfig"
 
 config GENERIC_ACL
 	bool
@@ -414,64 +123,8 @@
 if BLOCK
 menu "CD-ROM/DVD Filesystems"
 
-config ISO9660_FS
-	tristate "ISO 9660 CDROM file system support"
-	help
-	  This is the standard file system used on CD-ROMs.  It was previously
-	  known as "High Sierra File System" and is called "hsfs" on other
-	  Unix systems.  The so-called Rock-Ridge extensions which allow for
-	  long Unix filenames and symbolic links are also supported by this
-	  driver.  If you have a CD-ROM drive and want to do more with it than
-	  just listen to audio CDs and watch its LEDs, say Y (and read
-	  <file:Documentation/filesystems/isofs.txt> and the CD-ROM-HOWTO,
-	  available from <http://www.tldp.org/docs.html#howto>), thereby
-	  enlarging your kernel by about 27 KB; otherwise say N.
-
-	  To compile this file system support as a module, choose M here: the
-	  module will be called isofs.
-
-config JOLIET
-	bool "Microsoft Joliet CDROM extensions"
-	depends on ISO9660_FS
-	select NLS
-	help
-	  Joliet is a Microsoft extension for the ISO 9660 CD-ROM file system
-	  which allows for long filenames in unicode format (unicode is the
-	  new 16 bit character code, successor to ASCII, which encodes the
-	  characters of almost all languages of the world; see
-	  <http://www.unicode.org/> for more information).  Say Y here if you
-	  want to be able to read Joliet CD-ROMs under Linux.
-
-config ZISOFS
-	bool "Transparent decompression extension"
-	depends on ISO9660_FS
-	select ZLIB_INFLATE
-	help
-	  This is a Linux-specific extension to RockRidge which lets you store
-	  data in compressed form on a CD-ROM and have it transparently
-	  decompressed when the CD-ROM is accessed.  See
-	  <http://www.kernel.org/pub/linux/utils/fs/zisofs/> for the tools
-	  necessary to create such a filesystem.  Say Y here if you want to be
-	  able to read such compressed CD-ROMs.
-
-config UDF_FS
-	tristate "UDF file system support"
-	select CRC_ITU_T
-	help
-	  This is the new file system used on some CD-ROMs and DVDs. Say Y if
-	  you intend to mount DVD discs or CDRW's written in packet mode, or
-	  if written to by other UDF utilities, such as DirectCD.
-	  Please read <file:Documentation/filesystems/udf.txt>.
-
-	  To compile this file system support as a module, choose M here: the
-	  module will be called udf.
-
-	  If unsure, say N.
-
-config UDF_NLS
-	bool
-	default y
-	depends on (UDF_FS=m && NLS) || (UDF_FS=y && NLS=y)
+source "fs/isofs/Kconfig"
+source "fs/udf/Kconfig"
 
 endmenu
 endif # BLOCK
@@ -479,182 +132,8 @@
 if BLOCK
 menu "DOS/FAT/NT Filesystems"
 
-config FAT_FS
-	tristate
-	select NLS
-	help
-	  If you want to use one of the FAT-based file systems (the MS-DOS and
-	  VFAT (Windows 95) file systems), then you must say Y or M here
-	  to include FAT support. You will then be able to mount partitions or
-	  diskettes with FAT-based file systems and transparently access the
-	  files on them, i.e. MSDOS files will look and behave just like all
-	  other Unix files.
-
-	  This FAT support is not a file system in itself, it only provides
-	  the foundation for the other file systems. You will have to say Y or
-	  M to at least one of "MSDOS fs support" or "VFAT fs support" in
-	  order to make use of it.
-
-	  Another way to read and write MSDOS floppies and hard drive
-	  partitions from within Linux (but not transparently) is with the
-	  mtools ("man mtools") program suite. You don't need to say Y here in
-	  order to do that.
-
-	  If you need to move large files on floppies between a DOS and a
-	  Linux box, say Y here, mount the floppy under Linux with an MSDOS
-	  file system and use GNU tar's M option. GNU tar is a program
-	  available for Unix and DOS ("man tar" or "info tar").
-
-	  The FAT support will enlarge your kernel by about 37 KB. If unsure,
-	  say Y.
-
-	  To compile this as a module, choose M here: the module will be called
-	  fat.  Note that if you compile the FAT support as a module, you
-	  cannot compile any of the FAT-based file systems into the kernel
-	  -- they will have to be modules as well.
-
-config MSDOS_FS
-	tristate "MSDOS fs support"
-	select FAT_FS
-	help
-	  This allows you to mount MSDOS partitions of your hard drive (unless
-	  they are compressed; to access compressed MSDOS partitions under
-	  Linux, you can either use the DOS emulator DOSEMU, described in the
-	  DOSEMU-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>, or try dmsdosfs in
-	  <ftp://ibiblio.org/pub/Linux/system/filesystems/dosfs/>. If you
-	  intend to use dosemu with a non-compressed MSDOS partition, say Y
-	  here) and MSDOS floppies. This means that file access becomes
-	  transparent, i.e. the MSDOS files look and behave just like all
-	  other Unix files.
-
-	  If you have Windows 95 or Windows NT installed on your MSDOS
-	  partitions, you should use the VFAT file system (say Y to "VFAT fs
-	  support" below), or you will not be able to see the long filenames
-	  generated by Windows 95 / Windows NT.
-
-	  This option will enlarge your kernel by about 7 KB. If unsure,
-	  answer Y. This will only work if you said Y to "DOS FAT fs support"
-	  as well. To compile this as a module, choose M here: the module will
-	  be called msdos.
-
-config VFAT_FS
-	tristate "VFAT (Windows-95) fs support"
-	select FAT_FS
-	help
-	  This option provides support for normal Windows file systems with
-	  long filenames.  That includes non-compressed FAT-based file systems
-	  used by Windows 95, Windows 98, Windows NT 4.0, and the Unix
-	  programs from the mtools package.
-
-	  The VFAT support enlarges your kernel by about 10 KB and it only
-	  works if you said Y to the "DOS FAT fs support" above.  Please read
-	  the file <file:Documentation/filesystems/vfat.txt> for details.  If
-	  unsure, say Y.
-
-	  To compile this as a module, choose M here: the module will be called
-	  vfat.
-
-config FAT_DEFAULT_CODEPAGE
-	int "Default codepage for FAT"
-	depends on MSDOS_FS || VFAT_FS
-	default 437
-	help
-	  This option should be set to the codepage of your FAT filesystems.
-	  It can be overridden with the "codepage" mount option.
-	  See <file:Documentation/filesystems/vfat.txt> for more information.
-
-config FAT_DEFAULT_IOCHARSET
-	string "Default iocharset for FAT"
-	depends on VFAT_FS
-	default "iso8859-1"
-	help
-	  Set this to the default input/output character set you'd
-	  like FAT to use. It should probably match the character set
-	  that most of your FAT filesystems use, and can be overridden
-	  with the "iocharset" mount option for FAT filesystems.
-	  Note that "utf8" is not recommended for FAT filesystems.
-	  If unsure, you shouldn't set "utf8" here.
-	  See <file:Documentation/filesystems/vfat.txt> for more information.
-
-config NTFS_FS
-	tristate "NTFS file system support"
-	select NLS
-	help
-	  NTFS is the file system of Microsoft Windows NT, 2000, XP and 2003.
-
-	  Saying Y or M here enables read support.  There is partial, but
-	  safe, write support available.  For write support you must also
-	  say Y to "NTFS write support" below.
-
-	  There are also a number of user-space tools available, called
-	  ntfsprogs.  These include ntfsundelete and ntfsresize, that work
-	  without NTFS support enabled in the kernel.
-
-	  This is a rewrite from scratch of Linux NTFS support and replaced
-	  the old NTFS code starting with Linux 2.5.11.  A backport to
-	  the Linux 2.4 kernel series is separately available as a patch
-	  from the project web site.
-
-	  For more information see <file:Documentation/filesystems/ntfs.txt>
-	  and <http://www.linux-ntfs.org/>.
-
-	  To compile this file system support as a module, choose M here: the
-	  module will be called ntfs.
-
-	  If you are not using Windows NT, 2000, XP or 2003 in addition to
-	  Linux on your computer it is safe to say N.
-
-config NTFS_DEBUG
-	bool "NTFS debugging support"
-	depends on NTFS_FS
-	help
-	  If you are experiencing any problems with the NTFS file system, say
-	  Y here.  This will result in additional consistency checks to be
-	  performed by the driver as well as additional debugging messages to
-	  be written to the system log.  Note that debugging messages are
-	  disabled by default.  To enable them, supply the option debug_msgs=1
-	  at the kernel command line when booting the kernel or as an option
-	  to insmod when loading the ntfs module.  Once the driver is active,
-	  you can enable debugging messages by doing (as root):
-	  echo 1 > /proc/sys/fs/ntfs-debug
-	  Replacing the "1" with "0" would disable debug messages.
-
-	  If you leave debugging messages disabled, this results in little
-	  overhead, but enabling debug messages results in very significant
-	  slowdown of the system.
-
-	  When reporting bugs, please try to have available a full dump of
-	  debugging messages while the misbehaviour was occurring.
-
-config NTFS_RW
-	bool "NTFS write support"
-	depends on NTFS_FS
-	help
-	  This enables the partial, but safe, write support in the NTFS driver.
-
-	  The only supported operation is overwriting existing files, without
-	  changing the file length.  No file or directory creation, deletion or
-	  renaming is possible.  Note only non-resident files can be written to
-	  so you may find that some very small files (<500 bytes or so) cannot
-	  be written to.
-
-	  While we cannot guarantee that it will not damage any data, we have
-	  so far not received a single report where the driver would have
-	  damaged someones data so we assume it is perfectly safe to use.
-
-	  Note:  While write support is safe in this version (a rewrite from
-	  scratch of the NTFS support), it should be noted that the old NTFS
-	  write support, included in Linux 2.5.10 and before (since 1997),
-	  is not safe.
-
-	  This is currently useful with TopologiLinux.  TopologiLinux is run
-	  on top of any DOS/Microsoft Windows system without partitioning your
-	  hard disk.  Unlike other Linux distributions TopologiLinux does not
-	  need its own partition.  For more information see
-	  <http://topologi-linux.sourceforge.net/>
-
-	  It is perfectly safe to say N here.
+source "fs/fat/Kconfig"
+source "fs/ntfs/Kconfig"
 
 endmenu
 endif # BLOCK
@@ -662,30 +141,7 @@
 menu "Pseudo filesystems"
 
 source "fs/proc/Kconfig"
-
-config SYSFS
-	bool "sysfs file system support" if EMBEDDED
-	default y
-	help
-	The sysfs filesystem is a virtual filesystem that the kernel uses to
-	export internal kernel objects, their attributes, and their
-	relationships to one another.
-
-	Users can use sysfs to ascertain useful information about the running
-	kernel, such as the devices the kernel has discovered on each bus and
-	which driver each is bound to. sysfs can also be used to tune devices
-	and other kernel subsystems.
-
-	Some system agents rely on the information in sysfs to operate.
-	/sbin/hotplug uses device and object attributes in sysfs to assist in
-	delegating policy decisions, like persistently naming devices.
-
-	sysfs is currently used by the block subsystem to mount the root
-	partition.  If sysfs is disabled you must specify the boot device on
-	the kernel boot command line via its major and minor numbers.  For
-	example, "root=03:01" for /dev/hda1.
-
-	Designers of embedded systems may wish to say N here to conserve space.
+source "fs/sysfs/Kconfig"
 
 config TMPFS
 	bool "Virtual memory file system support (former shm fs)"
@@ -726,17 +182,7 @@
 config HUGETLB_PAGE
 	def_bool HUGETLBFS
 
-config CONFIGFS_FS
-	tristate "Userspace-driven configuration filesystem"
-	depends on SYSFS
-	help
-	  configfs is a ram-based filesystem that provides the converse
-	  of sysfs's functionality. Where sysfs is a filesystem-based
-	  view of kernel objects, configfs is a filesystem-based manager
-	  of kernel objects, or config_items.
-
-	  Both sysfs and configfs can and should exist together on the
-	  same system. One is not a replacement for the other.
+source "fs/configfs/Kconfig"
 
 endmenu
 
@@ -755,425 +201,27 @@
 
 if MISC_FILESYSTEMS
 
-config ADFS_FS
-	tristate "ADFS file system support (EXPERIMENTAL)"
-	depends on BLOCK && EXPERIMENTAL
-	help
-	  The Acorn Disc Filing System is the standard file system of the
-	  RiscOS operating system which runs on Acorn's ARM-based Risc PC
-	  systems and the Acorn Archimedes range of machines. If you say Y
-	  here, Linux will be able to read from ADFS partitions on hard drives
-	  and from ADFS-formatted floppy discs. If you also want to be able to
-	  write to those devices, say Y to "ADFS write support" below.
-
-	  The ADFS partition should be the first partition (i.e.,
-	  /dev/[hs]d?1) on each of your drives. Please read the file
-	  <file:Documentation/filesystems/adfs.txt> for further details.
-
-	  To compile this code as a module, choose M here: the module will be
-	  called adfs.
-
-	  If unsure, say N.
-
-config ADFS_FS_RW
-	bool "ADFS write support (DANGEROUS)"
-	depends on ADFS_FS
-	help
-	  If you say Y here, you will be able to write to ADFS partitions on
-	  hard drives and ADFS-formatted floppy disks. This is experimental
-	  codes, so if you're unsure, say N.
-
-config AFFS_FS
-	tristate "Amiga FFS file system support (EXPERIMENTAL)"
-	depends on BLOCK && EXPERIMENTAL
-	help
-	  The Fast File System (FFS) is the common file system used on hard
-	  disks by Amiga(tm) systems since AmigaOS Version 1.3 (34.20).  Say Y
-	  if you want to be able to read and write files from and to an Amiga
-	  FFS partition on your hard drive.  Amiga floppies however cannot be
-	  read with this driver due to an incompatibility of the floppy
-	  controller used in an Amiga and the standard floppy controller in
-	  PCs and workstations. Read <file:Documentation/filesystems/affs.txt>
-	  and <file:fs/affs/Changes>.
-
-	  With this driver you can also mount disk files used by Bernd
-	  Schmidt's Un*X Amiga Emulator
-	  (<http://www.freiburg.linux.de/~uae/>).
-	  If you want to do this, you will also need to say Y or M to "Loop
-	  device support", above.
-
-	  To compile this file system support as a module, choose M here: the
-	  module will be called affs.  If unsure, say N.
-
-config ECRYPT_FS
-	tristate "eCrypt filesystem layer support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && KEYS && CRYPTO && NET
-	help
-	  Encrypted filesystem that operates on the VFS layer.  See
-	  <file:Documentation/filesystems/ecryptfs.txt> to learn more about
-	  eCryptfs.  Userspace components are required and can be
-	  obtained from <http://ecryptfs.sf.net>.
-
-	  To compile this file system support as a module, choose M here: the
-	  module will be called ecryptfs.
-
-config HFS_FS
-	tristate "Apple Macintosh file system support (EXPERIMENTAL)"
-	depends on BLOCK && EXPERIMENTAL
-	select NLS
-	help
-	  If you say Y here, you will be able to mount Macintosh-formatted
-	  floppy disks and hard drive partitions with full read-write access.
-	  Please read <file:Documentation/filesystems/hfs.txt> to learn about
-	  the available mount options.
-
-	  To compile this file system support as a module, choose M here: the
-	  module will be called hfs.
-
-config HFSPLUS_FS
-	tristate "Apple Extended HFS file system support"
-	depends on BLOCK
-	select NLS
-	select NLS_UTF8
-	help
-	  If you say Y here, you will be able to mount extended format
-	  Macintosh-formatted hard drive partitions with full read-write access.
-
-	  This file system is often called HFS+ and was introduced with
-	  MacOS 8. It includes all Mac specific filesystem data such as
-	  data forks and creator codes, but it also has several UNIX
-	  style features such as file ownership and permissions.
-
-config BEFS_FS
-	tristate "BeOS file system (BeFS) support (read only) (EXPERIMENTAL)"
-	depends on BLOCK && EXPERIMENTAL
-	select NLS
-	help
-	  The BeOS File System (BeFS) is the native file system of Be, Inc's
-	  BeOS. Notable features include support for arbitrary attributes
-	  on files and directories, and database-like indices on selected
-	  attributes. (Also note that this driver doesn't make those features
-	  available at this time). It is a 64 bit filesystem, so it supports
-	  extremely large volumes and files.
-
-	  If you use this filesystem, you should also say Y to at least one
-	  of the NLS (native language support) options below.
-
-	  If you don't know what this is about, say N.
-
-	  To compile this as a module, choose M here: the module will be
-	  called befs.
-
-config BEFS_DEBUG
-	bool "Debug BeFS"
-	depends on BEFS_FS
-	help
-	  If you say Y here, you can use the 'debug' mount option to enable
-	  debugging output from the driver.
-
-config BFS_FS
-	tristate "BFS file system support (EXPERIMENTAL)"
-	depends on BLOCK && EXPERIMENTAL
-	help
-	  Boot File System (BFS) is a file system used under SCO UnixWare to
-	  allow the bootloader access to the kernel image and other important
-	  files during the boot process.  It is usually mounted under /stand
-	  and corresponds to the slice marked as "STAND" in the UnixWare
-	  partition.  You should say Y if you want to read or write the files
-	  on your /stand slice from within Linux.  You then also need to say Y
-	  to "UnixWare slices support", below.  More information about the BFS
-	  file system is contained in the file
-	  <file:Documentation/filesystems/bfs.txt>.
-
-	  If you don't know what this is about, say N.
-
-	  To compile this as a module, choose M here: the module will be called
-	  bfs.  Note that the file system of your root partition (the one
-	  containing the directory /) cannot be compiled as a module.
-
-
-
-config EFS_FS
-	tristate "EFS file system support (read only) (EXPERIMENTAL)"
-	depends on BLOCK && EXPERIMENTAL
-	help
-	  EFS is an older file system used for non-ISO9660 CD-ROMs and hard
-	  disk partitions by SGI's IRIX operating system (IRIX 6.0 and newer
-	  uses the XFS file system for hard disk partitions however).
-
-	  This implementation only offers read-only access. If you don't know
-	  what all this is about, it's safe to say N. For more information
-	  about EFS see its home page at <http://aeschi.ch.eu.org/efs/>.
-
-	  To compile the EFS file system support as a module, choose M here: the
-	  module will be called efs.
-
+source "fs/adfs/Kconfig"
+source "fs/affs/Kconfig"
+source "fs/ecryptfs/Kconfig"
+source "fs/hfs/Kconfig"
+source "fs/hfsplus/Kconfig"
+source "fs/befs/Kconfig"
+source "fs/bfs/Kconfig"
+source "fs/efs/Kconfig"
 source "fs/jffs2/Kconfig"
 # UBIFS File system configuration
 source "fs/ubifs/Kconfig"
-
-config CRAMFS
-	tristate "Compressed ROM file system support (cramfs)"
-	depends on BLOCK
-	select ZLIB_INFLATE
-	help
-	  Saying Y here includes support for CramFs (Compressed ROM File
-	  System).  CramFs is designed to be a simple, small, and compressed
-	  file system for ROM based embedded systems.  CramFs is read-only,
-	  limited to 256MB file systems (with 16MB files), and doesn't support
-	  16/32 bits uid/gid, hard links and timestamps.
-
-	  See <file:Documentation/filesystems/cramfs.txt> and
-	  <file:fs/cramfs/README> for further information.
-
-	  To compile this as a module, choose M here: the module will be called
-	  cramfs.  Note that the root file system (the one containing the
-	  directory /) cannot be compiled as a module.
-
-	  If unsure, say N.
-
-config SQUASHFS
-	tristate "SquashFS 4.0 - Squashed file system support"
-	depends on BLOCK
-	select ZLIB_INFLATE
-	help
-	  Saying Y here includes support for SquashFS 4.0 (a Compressed
-	  Read-Only File System).  Squashfs is a highly compressed read-only
-	  filesystem for Linux.  It uses zlib compression to compress both
-	  files, inodes and directories.  Inodes in the system are very small
-	  and all blocks are packed to minimise data overhead. Block sizes
-	  greater than 4K are supported up to a maximum of 1 Mbytes (default
-	  block size 128K).  SquashFS 4.0 supports 64 bit filesystems and files
-	  (larger than 4GB), full uid/gid information, hard links and
-	  timestamps.  
-
-	  Squashfs is intended for general read-only filesystem use, for
-	  archival use (i.e. in cases where a .tar.gz file may be used), and in
-	  embedded systems where low overhead is needed.  Further information
-	  and tools are available from http://squashfs.sourceforge.net.
-
-	  If you want to compile this as a module ( = code which can be
-	  inserted in and removed from the running kernel whenever you want),
-	  say M here and read <file:Documentation/modules.txt>.  The module
-	  will be called squashfs.  Note that the root file system (the one
-	  containing the directory /) cannot be compiled as a module.
-
-	  If unsure, say N.
-
-config SQUASHFS_EMBEDDED
-
-	bool "Additional option for memory-constrained systems" 
-	depends on SQUASHFS
-	default n
-	help
-	  Saying Y here allows you to specify cache size.
-
-	  If unsure, say N.
-
-config SQUASHFS_FRAGMENT_CACHE_SIZE
-	int "Number of fragments cached" if SQUASHFS_EMBEDDED
-	depends on SQUASHFS
-	default "3"
-	help
-	  By default SquashFS caches the last 3 fragments read from
-	  the filesystem.  Increasing this amount may mean SquashFS
-	  has to re-read fragments less often from disk, at the expense
-	  of extra system memory.  Decreasing this amount will mean
-	  SquashFS uses less memory at the expense of extra reads from disk.
-
-	  Note there must be at least one cached fragment.  Anything
-	  much more than three will probably not make much difference.
-
-config VXFS_FS
-	tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)"
-	depends on BLOCK
-	help
-	  FreeVxFS is a file system driver that support the VERITAS VxFS(TM)
-	  file system format.  VERITAS VxFS(TM) is the standard file system
-	  of SCO UnixWare (and possibly others) and optionally available
-	  for Sunsoft Solaris, HP-UX and many other operating systems.
-	  Currently only readonly access is supported.
-
-	  NOTE: the file system type as used by mount(1), mount(2) and
-	  fstab(5) is 'vxfs' as it describes the file system format, not
-	  the actual driver.
-
-	  To compile this as a module, choose M here: the module will be
-	  called freevxfs.  If unsure, say N.
-
-config MINIX_FS
-	tristate "Minix file system support"
-	depends on BLOCK
-	help
-	  Minix is a simple operating system used in many classes about OS's.
-	  The minix file system (method to organize files on a hard disk
-	  partition or a floppy disk) was the original file system for Linux,
-	  but has been superseded by the second extended file system ext2fs.
-	  You don't want to use the minix file system on your hard disk
-	  because of certain built-in restrictions, but it is sometimes found
-	  on older Linux floppy disks.  This option will enlarge your kernel
-	  by about 28 KB. If unsure, say N.
-
-	  To compile this file system support as a module, choose M here: the
-	  module will be called minix.  Note that the file system of your root
-	  partition (the one containing the directory /) cannot be compiled as
-	  a module.
-
-config OMFS_FS
-	tristate "SonicBlue Optimized MPEG File System support"
-	depends on BLOCK
-	select CRC_ITU_T
-	help
-	  This is the proprietary file system used by the Rio Karma music
-	  player and ReplayTV DVR.  Despite the name, this filesystem is not
-	  more efficient than a standard FS for MPEG files, in fact likely
-	  the opposite is true.  Say Y if you have either of these devices
-	  and wish to mount its disk.
-
-	  To compile this file system support as a module, choose M here: the
-	  module will be called omfs.  If unsure, say N.
-
-config HPFS_FS
-	tristate "OS/2 HPFS file system support"
-	depends on BLOCK
-	help
-	  OS/2 is IBM's operating system for PC's, the same as Warp, and HPFS
-	  is the file system used for organizing files on OS/2 hard disk
-	  partitions. Say Y if you want to be able to read files from and
-	  write files to an OS/2 HPFS partition on your hard drive. OS/2
-	  floppies however are in regular MSDOS format, so you don't need this
-	  option in order to be able to read them. Read
-	  <file:Documentation/filesystems/hpfs.txt>.
-
-	  To compile this file system support as a module, choose M here: the
-	  module will be called hpfs.  If unsure, say N.
-
-
-config QNX4FS_FS
-	tristate "QNX4 file system support (read only)"
-	depends on BLOCK
-	help
-	  This is the file system used by the real-time operating systems
-	  QNX 4 and QNX 6 (the latter is also called QNX RTP).
-	  Further information is available at <http://www.qnx.com/>.
-	  Say Y if you intend to mount QNX hard disks or floppies.
-	  Unless you say Y to "QNX4FS read-write support" below, you will
-	  only be able to read these file systems.
-
-	  To compile this file system support as a module, choose M here: the
-	  module will be called qnx4.
-
-	  If you don't know whether you need it, then you don't need it:
-	  answer N.
-
-config QNX4FS_RW
-	bool "QNX4FS write support (DANGEROUS)"
-	depends on QNX4FS_FS && EXPERIMENTAL && BROKEN
-	help
-	  Say Y if you want to test write support for QNX4 file systems.
-
-	  It's currently broken, so for now:
-	  answer N.
-
-config ROMFS_FS
-	tristate "ROM file system support"
-	depends on BLOCK
-	---help---
-	  This is a very small read-only file system mainly intended for
-	  initial ram disks of installation disks, but it could be used for
-	  other read-only media as well.  Read
-	  <file:Documentation/filesystems/romfs.txt> for details.
-
-	  To compile this file system support as a module, choose M here: the
-	  module will be called romfs.  Note that the file system of your
-	  root partition (the one containing the directory /) cannot be a
-	  module.
-
-	  If you don't know whether you need it, then you don't need it:
-	  answer N.
-
-
-config SYSV_FS
-	tristate "System V/Xenix/V7/Coherent file system support"
-	depends on BLOCK
-	help
-	  SCO, Xenix and Coherent are commercial Unix systems for Intel
-	  machines, and Version 7 was used on the DEC PDP-11. Saying Y
-	  here would allow you to read from their floppies and hard disk
-	  partitions.
-
-	  If you have floppies or hard disk partitions like that, it is likely
-	  that they contain binaries from those other Unix systems; in order
-	  to run these binaries, you will want to install linux-abi which is
-	  a set of kernel modules that lets you run SCO, Xenix, Wyse,
-	  UnixWare, Dell Unix and System V programs under Linux.  It is
-	  available via FTP (user: ftp) from
-	  <ftp://ftp.openlinux.org/pub/people/hch/linux-abi/>).
-	  NOTE: that will work only for binaries from Intel-based systems;
-	  PDP ones will have to wait until somebody ports Linux to -11 ;-)
-
-	  If you only intend to mount files from some other Unix over the
-	  network using NFS, you don't need the System V file system support
-	  (but you need NFS file system support obviously).
-
-	  Note that this option is generally not needed for floppies, since a
-	  good portable way to transport files and directories between unixes
-	  (and even other operating systems) is given by the tar program ("man
-	  tar" or preferably "info tar").  Note also that this option has
-	  nothing whatsoever to do with the option "System V IPC". Read about
-	  the System V file system in
-	  <file:Documentation/filesystems/sysv-fs.txt>.
-	  Saying Y here will enlarge your kernel by about 27 KB.
-
-	  To compile this as a module, choose M here: the module will be called
-	  sysv.
-
-	  If you haven't heard about all of this before, it's safe to say N.
-
-
-config UFS_FS
-	tristate "UFS file system support (read only)"
-	depends on BLOCK
-	help
-	  BSD and derivate versions of Unix (such as SunOS, FreeBSD, NetBSD,
-	  OpenBSD and NeXTstep) use a file system called UFS. Some System V
-	  Unixes can create and mount hard disk partitions and diskettes using
-	  this file system as well. Saying Y here will allow you to read from
-	  these partitions; if you also want to write to them, say Y to the
-	  experimental "UFS file system write support", below. Please read the
-	  file <file:Documentation/filesystems/ufs.txt> for more information.
-
-          The recently released UFS2 variant (used in FreeBSD 5.x) is
-          READ-ONLY supported.
-
-	  Note that this option is generally not needed for floppies, since a
-	  good portable way to transport files and directories between unixes
-	  (and even other operating systems) is given by the tar program ("man
-	  tar" or preferably "info tar").
-
-	  When accessing NeXTstep files, you may need to convert them from the
-	  NeXT character set to the Latin1 character set; use the program
-	  recode ("info recode") for this purpose.
-
-	  To compile the UFS file system support as a module, choose M here: the
-	  module will be called ufs.
-
-	  If you haven't heard about all of this before, it's safe to say N.
-
-config UFS_FS_WRITE
-	bool "UFS file system write support (DANGEROUS)"
-	depends on UFS_FS && EXPERIMENTAL
-	help
-	  Say Y here if you want to try writing to UFS partitions. This is
-	  experimental, so you should back up your UFS partitions beforehand.
-
-config UFS_DEBUG
-	bool "UFS debugging"
-	depends on UFS_FS
-	help
-	  If you are experiencing any problems with the UFS filesystem, say
-	  Y here.  This will result in _many_ additional debugging messages to be
-	  written to the system log.
+source "fs/cramfs/Kconfig"
+source "fs/squashfs/Kconfig"
+source "fs/freevxfs/Kconfig"
+source "fs/minix/Kconfig"
+source "fs/omfs/Kconfig"
+source "fs/hpfs/Kconfig"
+source "fs/qnx4/Kconfig"
+source "fs/romfs/Kconfig"
+source "fs/sysv/Kconfig"
+source "fs/ufs/Kconfig"
 
 endif # MISC_FILESYSTEMS
 
@@ -1193,173 +241,8 @@
 
 if NETWORK_FILESYSTEMS
 
-config NFS_FS
-	tristate "NFS client support"
-	depends on INET
-	select LOCKD
-	select SUNRPC
-	select NFS_ACL_SUPPORT if NFS_V3_ACL
-	help
-	  Choose Y here if you want to access files residing on other
-	  computers using Sun's Network File System protocol.  To compile
-	  this file system support as a module, choose M here: the module
-	  will be called nfs.
-
-	  To mount file systems exported by NFS servers, you also need to
-	  install the user space mount.nfs command which can be found in
-	  the Linux nfs-utils package, available from http://linux-nfs.org/.
-	  Information about using the mount command is available in the
-	  mount(8) man page.  More detail about the Linux NFS client
-	  implementation is available via the nfs(5) man page.
-
-	  Below you can choose which versions of the NFS protocol are
-	  available in the kernel to mount NFS servers.  Support for NFS
-	  version 2 (RFC 1094) is always available when NFS_FS is selected.
-
-	  To configure a system which mounts its root file system via NFS
-	  at boot time, say Y here, select "Kernel level IP
-	  autoconfiguration" in the NETWORK menu, and select "Root file
-	  system on NFS" below.  You cannot compile this file system as a
-	  module in this case.
-
-	  If unsure, say N.
-
-config NFS_V3
-	bool "NFS client support for NFS version 3"
-	depends on NFS_FS
-	help
-	  This option enables support for version 3 of the NFS protocol
-	  (RFC 1813) in the kernel's NFS client.
-
-	  If unsure, say Y.
-
-config NFS_V3_ACL
-	bool "NFS client support for the NFSv3 ACL protocol extension"
-	depends on NFS_V3
-	help
-	  Some NFS servers support an auxiliary NFSv3 ACL protocol that
-	  Sun added to Solaris but never became an official part of the
-	  NFS version 3 protocol.  This protocol extension allows
-	  applications on NFS clients to manipulate POSIX Access Control
-	  Lists on files residing on NFS servers.  NFS servers enforce
-	  ACLs on local files whether this protocol is available or not.
-
-	  Choose Y here if your NFS server supports the Solaris NFSv3 ACL
-	  protocol extension and you want your NFS client to allow
-	  applications to access and modify ACLs on files on the server.
-
-	  Most NFS servers don't support the Solaris NFSv3 ACL protocol
-	  extension.  You can choose N here or specify the "noacl" mount
-	  option to prevent your NFS client from trying to use the NFSv3
-	  ACL protocol.
-
-	  If unsure, say N.
-
-config NFS_V4
-	bool "NFS client support for NFS version 4 (EXPERIMENTAL)"
-	depends on NFS_FS && EXPERIMENTAL
-	select RPCSEC_GSS_KRB5
-	help
-	  This option enables support for version 4 of the NFS protocol
-	  (RFC 3530) in the kernel's NFS client.
-
-	  To mount NFS servers using NFSv4, you also need to install user
-	  space programs which can be found in the Linux nfs-utils package,
-	  available from http://linux-nfs.org/.
-
-	  If unsure, say N.
-
-config ROOT_NFS
-	bool "Root file system on NFS"
-	depends on NFS_FS=y && IP_PNP
-	help
-	  If you want your system to mount its root file system via NFS,
-	  choose Y here.  This is common practice for managing systems
-	  without local permanent storage.  For details, read
-	  <file:Documentation/filesystems/nfsroot.txt>.
-
-	  Most people say N here.
-
-config NFSD
-	tristate "NFS server support"
-	depends on INET
-	select LOCKD
-	select SUNRPC
-	select EXPORTFS
-	select NFS_ACL_SUPPORT if NFSD_V2_ACL
-	help
-	  Choose Y here if you want to allow other computers to access
-	  files residing on this system using Sun's Network File System
-	  protocol.  To compile the NFS server support as a module,
-	  choose M here: the module will be called nfsd.
-
-	  You may choose to use a user-space NFS server instead, in which
-	  case you can choose N here.
-
-	  To export local file systems using NFS, you also need to install
-	  user space programs which can be found in the Linux nfs-utils
-	  package, available from http://linux-nfs.org/.  More detail about
-	  the Linux NFS server implementation is available via the
-	  exports(5) man page.
-
-	  Below you can choose which versions of the NFS protocol are
-	  available to clients mounting the NFS server on this system.
-	  Support for NFS version 2 (RFC 1094) is always available when
-	  CONFIG_NFSD is selected.
-
-	  If unsure, say N.
-
-config NFSD_V2_ACL
-	bool
-	depends on NFSD
-
-config NFSD_V3
-	bool "NFS server support for NFS version 3"
-	depends on NFSD
-	help
-	  This option enables support in your system's NFS server for
-	  version 3 of the NFS protocol (RFC 1813).
-
-	  If unsure, say Y.
-
-config NFSD_V3_ACL
-	bool "NFS server support for the NFSv3 ACL protocol extension"
-	depends on NFSD_V3
-	select NFSD_V2_ACL
-	help
-	  Solaris NFS servers support an auxiliary NFSv3 ACL protocol that
-	  never became an official part of the NFS version 3 protocol.
-	  This protocol extension allows applications on NFS clients to
-	  manipulate POSIX Access Control Lists on files residing on NFS
-	  servers.  NFS servers enforce POSIX ACLs on local files whether
-	  this protocol is available or not.
-
-	  This option enables support in your system's NFS server for the
-	  NFSv3 ACL protocol extension allowing NFS clients to manipulate
-	  POSIX ACLs on files exported by your system's NFS server.  NFS
-	  clients which support the Solaris NFSv3 ACL protocol can then
-	  access and modify ACLs on your NFS server.
-
-	  To store ACLs on your NFS server, you also need to enable ACL-
-	  related CONFIG options for your local file systems of choice.
-
-	  If unsure, say N.
-
-config NFSD_V4
-	bool "NFS server support for NFS version 4 (EXPERIMENTAL)"
-	depends on NFSD && PROC_FS && EXPERIMENTAL
-	select NFSD_V3
-	select FS_POSIX_ACL
-	select RPCSEC_GSS_KRB5
-	help
-	  This option enables support in your system's NFS server for
-	  version 4 of the NFS protocol (RFC 3530).
-
-	  To export files using NFSv4, you need to install additional user
-	  space programs which can be found in the Linux nfs-utils package,
-	  available from http://linux-nfs.org/.
-
-	  If unsure, say N.
+source "fs/nfs/Kconfig"
+source "fs/nfsd/Kconfig"
 
 config LOCKD
 	tristate
@@ -1381,221 +264,13 @@
 	depends on NFSD || NFS_FS
 	default y
 
-config SUNRPC
-	tristate
-
-config SUNRPC_GSS
-	tristate
-
-config SUNRPC_XPRT_RDMA
-	tristate
-	depends on SUNRPC && INFINIBAND && EXPERIMENTAL
-	default SUNRPC && INFINIBAND
-	help
-	  This option enables an RPC client transport capability that
-	  allows the NFS client to mount servers via an RDMA-enabled
-	  transport.
-
-	  To compile RPC client RDMA transport support as a module,
-	  choose M here: the module will be called xprtrdma.
-
-	  If unsure, say N.
-
-config SUNRPC_REGISTER_V4
-	bool "Register local RPC services via rpcbind v4 (EXPERIMENTAL)"
-	depends on SUNRPC && EXPERIMENTAL
-	default n
-	help
-	  Sun added support for registering RPC services at an IPv6
-	  address by creating two new versions of the rpcbind protocol
-	  (RFC 1833).
-
-	  This option enables support in the kernel RPC server for
-	  registering kernel RPC services via version 4 of the rpcbind
-	  protocol.  If you enable this option, you must run a portmapper
-	  daemon that supports rpcbind protocol version 4.
-
-	  Serving NFS over IPv6 from knfsd (the kernel's NFS server)
-	  requires that you enable this option and use a portmapper that
-	  supports rpcbind version 4.
-
-	  If unsure, say N to get traditional behavior (register kernel
-	  RPC services using only rpcbind version 2).  Distributions
-	  using the legacy Linux portmapper daemon must say N here.
-
-config RPCSEC_GSS_KRB5
-	tristate "Secure RPC: Kerberos V mechanism (EXPERIMENTAL)"
-	depends on SUNRPC && EXPERIMENTAL
-	select SUNRPC_GSS
-	select CRYPTO
-	select CRYPTO_MD5
-	select CRYPTO_DES
-	select CRYPTO_CBC
-	help
-	  Choose Y here to enable Secure RPC using the Kerberos version 5
-	  GSS-API mechanism (RFC 1964).
-
-	  Secure RPC calls with Kerberos require an auxiliary user-space
-	  daemon which may be found in the Linux nfs-utils package
-	  available from http://linux-nfs.org/.  In addition, user-space
-	  Kerberos support should be installed.
-
-	  If unsure, say N.
-
-config RPCSEC_GSS_SPKM3
-	tristate "Secure RPC: SPKM3 mechanism (EXPERIMENTAL)"
-	depends on SUNRPC && EXPERIMENTAL
-	select SUNRPC_GSS
-	select CRYPTO
-	select CRYPTO_MD5
-	select CRYPTO_DES
-	select CRYPTO_CAST5
-	select CRYPTO_CBC
-	help
-	  Choose Y here to enable Secure RPC using the SPKM3 public key
-	  GSS-API mechansim (RFC 2025).
-
-	  Secure RPC calls with SPKM3 require an auxiliary userspace
-	  daemon which may be found in the Linux nfs-utils package
-	  available from http://linux-nfs.org/.
-
-	  If unsure, say N.
-
-config SMB_FS
-	tristate "SMB file system support (OBSOLETE, please use CIFS)"
-	depends on INET
-	select NLS
-	help
-	  SMB (Server Message Block) is the protocol Windows for Workgroups
-	  (WfW), Windows 95/98, Windows NT and OS/2 Lan Manager use to share
-	  files and printers over local networks.  Saying Y here allows you to
-	  mount their file systems (often called "shares" in this context) and
-	  access them just like any other Unix directory.  Currently, this
-	  works only if the Windows machines use TCP/IP as the underlying
-	  transport protocol, and not NetBEUI.  For details, read
-	  <file:Documentation/filesystems/smbfs.txt> and the SMB-HOWTO,
-	  available from <http://www.tldp.org/docs.html#howto>.
-
-	  Note: if you just want your box to act as an SMB *server* and make
-	  files and printing services available to Windows clients (which need
-	  to have a TCP/IP stack), you don't need to say Y here; you can use
-	  the program SAMBA (available from <ftp://ftp.samba.org/pub/samba/>)
-	  for that.
-
-	  General information about how to connect Linux, Windows machines and
-	  Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
-
-	  To compile the SMB support as a module, choose M here:
-	  the module will be called smbfs.  Most people say N, however.
-
-config SMB_NLS_DEFAULT
-	bool "Use a default NLS"
-	depends on SMB_FS
-	help
-	  Enabling this will make smbfs use nls translations by default. You
-	  need to specify the local charset (CONFIG_NLS_DEFAULT) in the nls
-	  settings and you need to give the default nls for the SMB server as
-	  CONFIG_SMB_NLS_REMOTE.
-
-	  The nls settings can be changed at mount time, if your smbmount
-	  supports that, using the codepage and iocharset parameters.
-
-	  smbmount from samba 2.2.0 or later supports this.
-
-config SMB_NLS_REMOTE
-	string "Default Remote NLS Option"
-	depends on SMB_NLS_DEFAULT
-	default "cp437"
-	help
-	  This setting allows you to specify a default value for which
-	  codepage the server uses. If this field is left blank no
-	  translations will be done by default. The local codepage/charset
-	  default to CONFIG_NLS_DEFAULT.
-
-	  The nls settings can be changed at mount time, if your smbmount
-	  supports that, using the codepage and iocharset parameters.
-
-	  smbmount from samba 2.2.0 or later supports this.
-
+source "net/sunrpc/Kconfig"
+source "fs/smbfs/Kconfig"
 source "fs/cifs/Kconfig"
-
-config NCP_FS
-	tristate "NCP file system support (to mount NetWare volumes)"
-	depends on IPX!=n || INET
-	help
-	  NCP (NetWare Core Protocol) is a protocol that runs over IPX and is
-	  used by Novell NetWare clients to talk to file servers.  It is to
-	  IPX what NFS is to TCP/IP, if that helps.  Saying Y here allows you
-	  to mount NetWare file server volumes and to access them just like
-	  any other Unix directory.  For details, please read the file
-	  <file:Documentation/filesystems/ncpfs.txt> in the kernel source and
-	  the IPX-HOWTO from <http://www.tldp.org/docs.html#howto>.
-
-	  You do not have to say Y here if you want your Linux box to act as a
-	  file *server* for Novell NetWare clients.
-
-	  General information about how to connect Linux, Windows machines and
-	  Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
-
-	  To compile this as a module, choose M here: the module will be called
-	  ncpfs.  Say N unless you are connected to a Novell network.
-
 source "fs/ncpfs/Kconfig"
-
-config CODA_FS
-	tristate "Coda file system support (advanced network fs)"
-	depends on INET
-	help
-	  Coda is an advanced network file system, similar to NFS in that it
-	  enables you to mount file systems of a remote server and access them
-	  with regular Unix commands as if they were sitting on your hard
-	  disk.  Coda has several advantages over NFS: support for
-	  disconnected operation (e.g. for laptops), read/write server
-	  replication, security model for authentication and encryption,
-	  persistent client caches and write back caching.
-
-	  If you say Y here, your Linux box will be able to act as a Coda
-	  *client*.  You will need user level code as well, both for the
-	  client and server.  Servers are currently user level, i.e. they need
-	  no kernel support.  Please read
-	  <file:Documentation/filesystems/coda.txt> and check out the Coda
-	  home page <http://www.coda.cs.cmu.edu/>.
-
-	  To compile the coda client support as a module, choose M here: the
-	  module will be called coda.
-
-config AFS_FS
-	tristate "Andrew File System support (AFS) (EXPERIMENTAL)"
-	depends on INET && EXPERIMENTAL
-	select AF_RXRPC
-	help
-	  If you say Y here, you will get an experimental Andrew File System
-	  driver. It currently only supports unsecured read-only AFS access.
-
-	  See <file:Documentation/filesystems/afs.txt> for more information.
-
-	  If unsure, say N.
-
-config AFS_DEBUG
-	bool "AFS dynamic debugging"
-	depends on AFS_FS
-	help
-	  Say Y here to make runtime controllable debugging messages appear.
-
-	  See <file:Documentation/filesystems/afs.txt> for more information.
-
-	  If unsure, say N.
-
-config 9P_FS
-	tristate "Plan 9 Resource Sharing Support (9P2000) (Experimental)"
-	depends on INET && NET_9P && EXPERIMENTAL
-	help
-	  If you say Y here, you will get experimental support for
-	  Plan 9 resource sharing via the 9P2000 protocol.
-
-	  See <http://v9fs.sf.net> for more information.
-
-	  If unsure, say N.
+source "fs/coda/Kconfig"
+source "fs/afs/Kconfig"
+source "fs/9p/Kconfig"
 
 endif # NETWORK_FILESYSTEMS
 
diff --git a/fs/adfs/Kconfig b/fs/adfs/Kconfig
new file mode 100644
index 0000000..e55182a
--- /dev/null
+++ b/fs/adfs/Kconfig
@@ -0,0 +1,27 @@
+config ADFS_FS
+	tristate "ADFS file system support (EXPERIMENTAL)"
+	depends on BLOCK && EXPERIMENTAL
+	help
+	  The Acorn Disc Filing System is the standard file system of the
+	  RiscOS operating system which runs on Acorn's ARM-based Risc PC
+	  systems and the Acorn Archimedes range of machines. If you say Y
+	  here, Linux will be able to read from ADFS partitions on hard drives
+	  and from ADFS-formatted floppy discs. If you also want to be able to
+	  write to those devices, say Y to "ADFS write support" below.
+
+	  The ADFS partition should be the first partition (i.e.,
+	  /dev/[hs]d?1) on each of your drives. Please read the file
+	  <file:Documentation/filesystems/adfs.txt> for further details.
+
+	  To compile this code as a module, choose M here: the module will be
+	  called adfs.
+
+	  If unsure, say N.
+
+config ADFS_FS_RW
+	bool "ADFS write support (DANGEROUS)"
+	depends on ADFS_FS
+	help
+	  If you say Y here, you will be able to write to ADFS partitions on
+	  hard drives and ADFS-formatted floppy disks. This is experimental
+	  codes, so if you're unsure, say N.
diff --git a/fs/affs/Kconfig b/fs/affs/Kconfig
new file mode 100644
index 0000000..cfad9af
--- /dev/null
+++ b/fs/affs/Kconfig
@@ -0,0 +1,21 @@
+config AFFS_FS
+	tristate "Amiga FFS file system support (EXPERIMENTAL)"
+	depends on BLOCK && EXPERIMENTAL
+	help
+	  The Fast File System (FFS) is the common file system used on hard
+	  disks by Amiga(tm) systems since AmigaOS Version 1.3 (34.20).  Say Y
+	  if you want to be able to read and write files from and to an Amiga
+	  FFS partition on your hard drive.  Amiga floppies however cannot be
+	  read with this driver due to an incompatibility of the floppy
+	  controller used in an Amiga and the standard floppy controller in
+	  PCs and workstations. Read <file:Documentation/filesystems/affs.txt>
+	  and <file:fs/affs/Changes>.
+
+	  With this driver you can also mount disk files used by Bernd
+	  Schmidt's Un*X Amiga Emulator
+	  (<http://www.freiburg.linux.de/~uae/>).
+	  If you want to do this, you will also need to say Y or M to "Loop
+	  device support", above.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called affs.  If unsure, say N.
diff --git a/fs/afs/Kconfig b/fs/afs/Kconfig
new file mode 100644
index 0000000..e7b522f
--- /dev/null
+++ b/fs/afs/Kconfig
@@ -0,0 +1,21 @@
+config AFS_FS
+	tristate "Andrew File System support (AFS) (EXPERIMENTAL)"
+	depends on INET && EXPERIMENTAL
+	select AF_RXRPC
+	help
+	  If you say Y here, you will get an experimental Andrew File System
+	  driver. It currently only supports unsecured read-only AFS access.
+
+	  See <file:Documentation/filesystems/afs.txt> for more information.
+
+	  If unsure, say N.
+
+config AFS_DEBUG
+	bool "AFS dynamic debugging"
+	depends on AFS_FS
+	help
+	  Say Y here to make runtime controllable debugging messages appear.
+
+	  See <file:Documentation/filesystems/afs.txt> for more information.
+
+	  If unsure, say N.
diff --git a/fs/aio.c b/fs/aio.c
index d6f89d3..8fa77e2 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -1270,7 +1270,7 @@
  *	pointer is passed for ctxp.  Will fail with -ENOSYS if not
  *	implemented.
  */
-asmlinkage long sys_io_setup(unsigned nr_events, aio_context_t __user *ctxp)
+SYSCALL_DEFINE2(io_setup, unsigned, nr_events, aio_context_t __user *, ctxp)
 {
 	struct kioctx *ioctx = NULL;
 	unsigned long ctx;
@@ -1308,7 +1308,7 @@
  *	implemented.  May fail with -EFAULT if the context pointed to
  *	is invalid.
  */
-asmlinkage long sys_io_destroy(aio_context_t ctx)
+SYSCALL_DEFINE1(io_destroy, aio_context_t, ctx)
 {
 	struct kioctx *ioctx = lookup_ioctx(ctx);
 	if (likely(NULL != ioctx)) {
@@ -1662,8 +1662,8 @@
  *	are available to queue any iocbs.  Will return 0 if nr is 0.  Will
  *	fail with -ENOSYS if not implemented.
  */
-asmlinkage long sys_io_submit(aio_context_t ctx_id, long nr,
-			      struct iocb __user * __user *iocbpp)
+SYSCALL_DEFINE3(io_submit, aio_context_t, ctx_id, long, nr,
+		struct iocb __user * __user *, iocbpp)
 {
 	struct kioctx *ctx;
 	long ret = 0;
@@ -1737,8 +1737,8 @@
  *	invalid.  May fail with -EAGAIN if the iocb specified was not
  *	cancelled.  Will fail with -ENOSYS if not implemented.
  */
-asmlinkage long sys_io_cancel(aio_context_t ctx_id, struct iocb __user *iocb,
-			      struct io_event __user *result)
+SYSCALL_DEFINE3(io_cancel, aio_context_t, ctx_id, struct iocb __user *, iocb,
+		struct io_event __user *, result)
 {
 	int (*cancel)(struct kiocb *iocb, struct io_event *res);
 	struct kioctx *ctx;
@@ -1799,11 +1799,11 @@
  *	will be updated if not NULL and the operation blocks.  Will fail
  *	with -ENOSYS if not implemented.
  */
-asmlinkage long sys_io_getevents(aio_context_t ctx_id,
-				 long min_nr,
-				 long nr,
-				 struct io_event __user *events,
-				 struct timespec __user *timeout)
+SYSCALL_DEFINE5(io_getevents, aio_context_t, ctx_id,
+		long, min_nr,
+		long, nr,
+		struct io_event __user *, events,
+		struct timespec __user *, timeout)
 {
 	struct kioctx *ioctx = lookup_ioctx(ctx_id);
 	long ret = -EINVAL;
diff --git a/fs/autofs/Kconfig b/fs/autofs/Kconfig
new file mode 100644
index 0000000..5f3bea9
--- /dev/null
+++ b/fs/autofs/Kconfig
@@ -0,0 +1,21 @@
+config AUTOFS_FS
+	tristate "Kernel automounter support"
+	help
+	  The automounter is a tool to automatically mount remote file systems
+	  on demand. This implementation is partially kernel-based to reduce
+	  overhead in the already-mounted case; this is unlike the BSD
+	  automounter (amd), which is a pure user space daemon.
+
+	  To use the automounter you need the user-space tools from the autofs
+	  package; you can find the location in <file:Documentation/Changes>.
+	  You also want to answer Y to "NFS file system support", below.
+
+	  If you want to use the newer version of the automounter with more
+	  features, say N here and say Y to "Kernel automounter v4 support",
+	  below.
+
+	  To compile this support as a module, choose M here: the module will be
+	  called autofs.
+
+	  If you are not a part of a fairly large, distributed network, you
+	  probably do not need an automounter, and can say N here.
diff --git a/fs/autofs4/Kconfig b/fs/autofs4/Kconfig
new file mode 100644
index 0000000..1204d63
--- /dev/null
+++ b/fs/autofs4/Kconfig
@@ -0,0 +1,20 @@
+config AUTOFS4_FS
+	tristate "Kernel automounter version 4 support (also supports v3)"
+	help
+	  The automounter is a tool to automatically mount remote file systems
+	  on demand. This implementation is partially kernel-based to reduce
+	  overhead in the already-mounted case; this is unlike the BSD
+	  automounter (amd), which is a pure user space daemon.
+
+	  To use the automounter you need the user-space tools from
+	  <ftp://ftp.kernel.org/pub/linux/daemons/autofs/v4/>; you also
+	  want to answer Y to "NFS file system support", below.
+
+	  To compile this support as a module, choose M here: the module will be
+	  called autofs4.  You will need to add "alias autofs autofs4" to your
+	  modules configuration file.
+
+	  If you are not a part of a fairly large, distributed network or
+	  don't have a laptop which needs to dynamically reconfigure to the
+	  local network, you probably do not need an automounter, and can say
+	  N here.
diff --git a/fs/befs/Kconfig b/fs/befs/Kconfig
new file mode 100644
index 0000000..7835d30
--- /dev/null
+++ b/fs/befs/Kconfig
@@ -0,0 +1,26 @@
+config BEFS_FS
+	tristate "BeOS file system (BeFS) support (read only) (EXPERIMENTAL)"
+	depends on BLOCK && EXPERIMENTAL
+	select NLS
+	help
+	  The BeOS File System (BeFS) is the native file system of Be, Inc's
+	  BeOS. Notable features include support for arbitrary attributes
+	  on files and directories, and database-like indices on selected
+	  attributes. (Also note that this driver doesn't make those features
+	  available at this time). It is a 64 bit filesystem, so it supports
+	  extremely large volumes and files.
+
+	  If you use this filesystem, you should also say Y to at least one
+	  of the NLS (native language support) options below.
+
+	  If you don't know what this is about, say N.
+
+	  To compile this as a module, choose M here: the module will be
+	  called befs.
+
+config BEFS_DEBUG
+	bool "Debug BeFS"
+	depends on BEFS_FS
+	help
+	  If you say Y here, you can use the 'debug' mount option to enable
+	  debugging output from the driver.
diff --git a/fs/bfs/Kconfig b/fs/bfs/Kconfig
new file mode 100644
index 0000000..c2336c6
--- /dev/null
+++ b/fs/bfs/Kconfig
@@ -0,0 +1,19 @@
+config BFS_FS
+	tristate "BFS file system support (EXPERIMENTAL)"
+	depends on BLOCK && EXPERIMENTAL
+	help
+	  Boot File System (BFS) is a file system used under SCO UnixWare to
+	  allow the bootloader access to the kernel image and other important
+	  files during the boot process.  It is usually mounted under /stand
+	  and corresponds to the slice marked as "STAND" in the UnixWare
+	  partition.  You should say Y if you want to read or write the files
+	  on your /stand slice from within Linux.  You then also need to say Y
+	  to "UnixWare slices support", below.  More information about the BFS
+	  file system is contained in the file
+	  <file:Documentation/filesystems/bfs.txt>.
+
+	  If you don't know what this is about, say N.
+
+	  To compile this as a module, choose M here: the module will be called
+	  bfs.  Note that the file system of your root partition (the one
+	  containing the directory /) cannot be compiled as a module.
diff --git a/fs/btrfs/Kconfig b/fs/btrfs/Kconfig
new file mode 100644
index 0000000..f8fcf99
--- /dev/null
+++ b/fs/btrfs/Kconfig
@@ -0,0 +1,18 @@
+config BTRFS_FS
+	tristate "Btrfs filesystem (EXPERIMENTAL) Unstable disk format"
+	depends on EXPERIMENTAL
+	select LIBCRC32C
+	select ZLIB_INFLATE
+	select ZLIB_DEFLATE
+	help
+	  Btrfs is a new filesystem with extents, writable snapshotting,
+	  support for multiple devices and many more features.
+
+	  Btrfs is highly experimental, and THE DISK FORMAT IS NOT YET
+	  FINALIZED.  You should say N here unless you are interested in
+	  testing Btrfs with non-critical data.
+
+	  To compile this file system support as a module, choose M here. The
+	  module will be called btrfs.
+
+	  If unsure, say N.
diff --git a/fs/btrfs/ioctl.h b/fs/btrfs/ioctl.h
index 78049ea..b320b10 100644
--- a/fs/btrfs/ioctl.h
+++ b/fs/btrfs/ioctl.h
@@ -22,13 +22,20 @@
 
 #define BTRFS_IOCTL_MAGIC 0x94
 #define BTRFS_VOL_NAME_MAX 255
-#define BTRFS_PATH_NAME_MAX 3072
+#define BTRFS_PATH_NAME_MAX 4087
 
+/* this should be 4k */
 struct btrfs_ioctl_vol_args {
 	__s64 fd;
 	char name[BTRFS_PATH_NAME_MAX + 1];
 };
 
+struct btrfs_ioctl_clone_range_args {
+  __s64 src_fd;
+  __u64 src_offset, src_length;
+  __u64 dest_offset;
+};
+
 #define BTRFS_IOC_SNAP_CREATE _IOW(BTRFS_IOCTL_MAGIC, 1, \
 				   struct btrfs_ioctl_vol_args)
 #define BTRFS_IOC_DEFRAG _IOW(BTRFS_IOCTL_MAGIC, 2, \
@@ -52,11 +59,6 @@
 				   struct btrfs_ioctl_vol_args)
 #define BTRFS_IOC_BALANCE _IOW(BTRFS_IOCTL_MAGIC, 12, \
 				   struct btrfs_ioctl_vol_args)
-struct btrfs_ioctl_clone_range_args {
-  __s64 src_fd;
-  __u64 src_offset, src_length;
-  __u64 dest_offset;
-};
 
 #define BTRFS_IOC_CLONE_RANGE _IOW(BTRFS_IOCTL_MAGIC, 13, \
 				  struct btrfs_ioctl_clone_range_args)
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 0a14b49..db9fb3b 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -38,6 +38,7 @@
 #include <linux/namei.h>
 #include <linux/miscdevice.h>
 #include <linux/version.h>
+#include <linux/magic.h>
 #include "compat.h"
 #include "ctree.h"
 #include "disk-io.h"
@@ -51,7 +52,6 @@
 #include "export.h"
 #include "compression.h"
 
-#define BTRFS_SUPER_MAGIC 0x9123683E
 
 static struct super_operations btrfs_super_ops;
 
@@ -582,7 +582,7 @@
 {
 	struct btrfs_ioctl_vol_args *vol;
 	struct btrfs_fs_devices *fs_devices;
-	int ret = 0;
+	int ret = -ENOTTY;
 	int len;
 
 	if (!capable(CAP_SYS_ADMIN))
@@ -594,6 +594,7 @@
 		goto out;
 	}
 	len = strnlen(vol->name, BTRFS_PATH_NAME_MAX);
+
 	switch (cmd) {
 	case BTRFS_IOC_SCAN_DEV:
 		ret = btrfs_scan_one_device(vol->name, FMODE_READ,
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index b187b53..3451e1c 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -220,6 +220,7 @@
 				tail->bi_next = old_head;
 			else
 				device->pending_bio_tail = tail;
+			device->running_pending = 0;
 
 			spin_unlock(&device->io_lock);
 			btrfs_requeue_work(&device->work);
diff --git a/fs/buffer.c b/fs/buffer.c
index b6e8b86..b58208f 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -3243,7 +3243,7 @@
  * Use of bdflush() is deprecated and will be removed in a future kernel.
  * The `pdflush' kernel threads fully replace bdflush daemons and this call.
  */
-asmlinkage long sys_bdflush(int func, long data)
+SYSCALL_DEFINE2(bdflush, int, func, long, data)
 {
 	static int msg_count;
 
diff --git a/fs/coda/Kconfig b/fs/coda/Kconfig
new file mode 100644
index 0000000..c0e5a7f
--- /dev/null
+++ b/fs/coda/Kconfig
@@ -0,0 +1,21 @@
+config CODA_FS
+	tristate "Coda file system support (advanced network fs)"
+	depends on INET
+	help
+	  Coda is an advanced network file system, similar to NFS in that it
+	  enables you to mount file systems of a remote server and access them
+	  with regular Unix commands as if they were sitting on your hard
+	  disk.  Coda has several advantages over NFS: support for
+	  disconnected operation (e.g. for laptops), read/write server
+	  replication, security model for authentication and encryption,
+	  persistent client caches and write back caching.
+
+	  If you say Y here, your Linux box will be able to act as a Coda
+	  *client*.  You will need user level code as well, both for the
+	  client and server.  Servers are currently user level, i.e. they need
+	  no kernel support.  Please read
+	  <file:Documentation/filesystems/coda.txt> and check out the Coda
+	  home page <http://www.coda.cs.cmu.edu/>.
+
+	  To compile the coda client support as a module, choose M here: the
+	  module will be called coda.
diff --git a/fs/compat.c b/fs/compat.c
index 30f2faa..65a070e 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -1709,7 +1709,7 @@
 }
 
 #ifdef HAVE_SET_RESTORE_SIGMASK
-asmlinkage long compat_sys_pselect7(int n, compat_ulong_t __user *inp,
+static long do_compat_pselect(int n, compat_ulong_t __user *inp,
 	compat_ulong_t __user *outp, compat_ulong_t __user *exp,
 	struct compat_timespec __user *tsp, compat_sigset_t __user *sigmask,
 	compat_size_t sigsetsize)
@@ -1775,8 +1775,8 @@
 				(compat_size_t __user *)(sig+sizeof(up))))
 			return -EFAULT;
 	}
-	return compat_sys_pselect7(n, inp, outp, exp, tsp, compat_ptr(up),
-					sigsetsize);
+	return do_compat_pselect(n, inp, outp, exp, tsp, compat_ptr(up),
+				 sigsetsize);
 }
 
 asmlinkage long compat_sys_ppoll(struct pollfd __user *ufds,
diff --git a/fs/configfs/Kconfig b/fs/configfs/Kconfig
new file mode 100644
index 0000000..13587cc
--- /dev/null
+++ b/fs/configfs/Kconfig
@@ -0,0 +1,11 @@
+config CONFIGFS_FS
+	tristate "Userspace-driven configuration filesystem"
+	depends on SYSFS
+	help
+	  configfs is a ram-based filesystem that provides the converse
+	  of sysfs's functionality. Where sysfs is a filesystem-based
+	  view of kernel objects, configfs is a filesystem-based manager
+	  of kernel objects, or config_items.
+
+	  Both sysfs and configfs can and should exist together on the
+	  same system. One is not a replacement for the other.
diff --git a/fs/cramfs/Kconfig b/fs/cramfs/Kconfig
new file mode 100644
index 0000000..cd06466
--- /dev/null
+++ b/fs/cramfs/Kconfig
@@ -0,0 +1,19 @@
+config CRAMFS
+	tristate "Compressed ROM file system support (cramfs)"
+	depends on BLOCK
+	select ZLIB_INFLATE
+	help
+	  Saying Y here includes support for CramFs (Compressed ROM File
+	  System).  CramFs is designed to be a simple, small, and compressed
+	  file system for ROM based embedded systems.  CramFs is read-only,
+	  limited to 256MB file systems (with 16MB files), and doesn't support
+	  16/32 bits uid/gid, hard links and timestamps.
+
+	  See <file:Documentation/filesystems/cramfs.txt> and
+	  <file:fs/cramfs/README> for further information.
+
+	  To compile this as a module, choose M here: the module will be called
+	  cramfs.  Note that the root file system (the one containing the
+	  directory /) cannot be compiled as a module.
+
+	  If unsure, say N.
diff --git a/fs/dcache.c b/fs/dcache.c
index 4547f66..937df0f 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -2092,7 +2092,7 @@
  *		return NULL;
  *	}
  */
-asmlinkage long sys_getcwd(char __user *buf, unsigned long size)
+SYSCALL_DEFINE2(getcwd, char __user *, buf, unsigned long, size)
 {
 	int error;
 	struct path pwd, root;
diff --git a/fs/dcookies.c b/fs/dcookies.c
index 180e9fe..a21cabd 100644
--- a/fs/dcookies.c
+++ b/fs/dcookies.c
@@ -145,7 +145,7 @@
 /* And here is where the userspace process can look up the cookie value
  * to retrieve the path.
  */
-asmlinkage long sys_lookup_dcookie(u64 cookie64, char __user * buf, size_t len)
+SYSCALL_DEFINE(lookup_dcookie)(u64 cookie64, char __user * buf, size_t len)
 {
 	unsigned long cookie = (unsigned long)cookie64;
 	int err = -EINVAL;
@@ -198,7 +198,13 @@
 	mutex_unlock(&dcookie_mutex);
 	return err;
 }
-
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_lookup_dcookie(u64 cookie64, long buf, long len)
+{
+	return SYSC_lookup_dcookie(cookie64, (char __user *) buf, (size_t) len);
+}
+SYSCALL_ALIAS(sys_lookup_dcookie, SyS_lookup_dcookie);
+#endif
 
 static int dcookie_init(void)
 {
diff --git a/fs/dlm/plock.c b/fs/dlm/plock.c
index eba87ff..894a32d 100644
--- a/fs/dlm/plock.c
+++ b/fs/dlm/plock.c
@@ -168,7 +168,7 @@
 	notify = xop->callback;
 
 	if (op->info.rv) {
-		notify(flc, NULL, op->info.rv);
+		notify(fl, NULL, op->info.rv);
 		goto out;
 	}
 
@@ -187,7 +187,7 @@
 			  (unsigned long long)op->info.number, file, fl);
 	}
 
-	rv = notify(flc, NULL, 0);
+	rv = notify(fl, NULL, 0);
 	if (rv) {
 		/* XXX: We need to cancel the fs lock here: */
 		log_print("dlm_plock_callback: lock granted after lock request "
@@ -304,7 +304,9 @@
 	if (rv == -ENOENT)
 		rv = 0;
 	else if (rv > 0) {
+		locks_init_lock(fl);
 		fl->fl_type = (op->info.ex) ? F_WRLCK : F_RDLCK;
+		fl->fl_flags = FL_POSIX;
 		fl->fl_pid = op->info.pid;
 		fl->fl_start = op->info.start;
 		fl->fl_end = op->info.end;
diff --git a/fs/dquot.c b/fs/dquot.c
index 48c0571..bca3cac 100644
--- a/fs/dquot.c
+++ b/fs/dquot.c
@@ -87,14 +87,17 @@
 #define __DQUOT_PARANOIA
 
 /*
- * There are two quota SMP locks. dq_list_lock protects all lists with quotas
- * and quota formats and also dqstats structure containing statistics about the
- * lists. dq_data_lock protects data from dq_dqb and also mem_dqinfo structures
- * and also guards consistency of dquot->dq_dqb with inode->i_blocks, i_bytes.
+ * There are three quota SMP locks. dq_list_lock protects all lists with quotas
+ * and quota formats, dqstats structure containing statistics about the lists
+ * dq_data_lock protects data from dq_dqb and also mem_dqinfo structures and
+ * also guards consistency of dquot->dq_dqb with inode->i_blocks, i_bytes.
  * i_blocks and i_bytes updates itself are guarded by i_lock acquired directly
- * in inode_add_bytes() and inode_sub_bytes().
+ * in inode_add_bytes() and inode_sub_bytes(). dq_state_lock protects
+ * modifications of quota state (on quotaon and quotaoff) and readers who care
+ * about latest values take it as well.
  *
- * The spinlock ordering is hence: dq_data_lock > dq_list_lock > i_lock
+ * The spinlock ordering is hence: dq_data_lock > dq_list_lock > i_lock,
+ *   dq_list_lock > dq_state_lock
  *
  * Note that some things (eg. sb pointer, type, id) doesn't change during
  * the life of the dquot structure and so needn't to be protected by a lock
@@ -103,12 +106,7 @@
  * operation is just reading pointers from inode (or not using them at all) the
  * read lock is enough. If pointers are altered function must hold write lock
  * (these locking rules also apply for S_NOQUOTA flag in the inode - note that
- * for altering the flag i_mutex is also needed).  If operation is holding
- * reference to dquot in other way (e.g. quotactl ops) it must be guarded by
- * dqonoff_mutex.
- * This locking assures that:
- *   a) update/access to dquot pointers in inode is serialized
- *   b) everyone is guarded against invalidate_dquots()
+ * for altering the flag i_mutex is also needed).
  *
  * Each dquot has its dq_lock mutex. Locked dquots might not be referenced
  * from inodes (dquot_alloc_space() and such don't check the dq_lock).
@@ -122,10 +120,17 @@
  * Lock ordering (including related VFS locks) is the following:
  *   i_mutex > dqonoff_sem > journal_lock > dqptr_sem > dquot->dq_lock >
  *   dqio_mutex
+ * The lock ordering of dqptr_sem imposed by quota code is only dqonoff_sem >
+ * dqptr_sem. But filesystem has to count with the fact that functions such as
+ * dquot_alloc_space() acquire dqptr_sem and they usually have to be called
+ * from inside a transaction to keep filesystem consistency after a crash. Also
+ * filesystems usually want to do some IO on dquot from ->mark_dirty which is
+ * called with dqptr_sem held.
  * i_mutex on quota files is special (it's below dqio_mutex)
  */
 
 static DEFINE_SPINLOCK(dq_list_lock);
+static DEFINE_SPINLOCK(dq_state_lock);
 DEFINE_SPINLOCK(dq_data_lock);
 
 static char *quotatypes[] = INITQFNAMES;
@@ -428,7 +433,7 @@
  * quota is disabled and pointers from inodes removed so there cannot be new
  * quota users. There can still be some users of quotas due to inodes being
  * just deleted or pruned by prune_icache() (those are not attached to any
- * list). We have to wait for such users.
+ * list) or parallel quotactl call. We have to wait for such users.
  */
 static void invalidate_dquots(struct super_block *sb, int type)
 {
@@ -600,7 +605,6 @@
 /*
  * Put reference to dquot
  * NOTE: If you change this function please check whether dqput_blocks() works right...
- * MUST be called with either dqptr_sem or dqonoff_mutex held
  */
 void dqput(struct dquot *dquot)
 {
@@ -697,36 +701,30 @@
 }
 
 /*
- * Check whether dquot is in memory.
- * MUST be called with either dqptr_sem or dqonoff_mutex held
- */
-int dquot_is_cached(struct super_block *sb, unsigned int id, int type)
-{
-	unsigned int hashent = hashfn(sb, id, type);
-	int ret = 0;
-
-        if (!sb_has_quota_active(sb, type))
-		return 0;
-	spin_lock(&dq_list_lock);
-	if (find_dquot(hashent, sb, id, type) != NODQUOT)
-		ret = 1;
-	spin_unlock(&dq_list_lock);
-	return ret;
-}
-
-/*
  * Get reference to dquot
- * MUST be called with either dqptr_sem or dqonoff_mutex held
+ *
+ * Locking is slightly tricky here. We are guarded from parallel quotaoff()
+ * destroying our dquot by:
+ *   a) checking for quota flags under dq_list_lock and
+ *   b) getting a reference to dquot before we release dq_list_lock
  */
 struct dquot *dqget(struct super_block *sb, unsigned int id, int type)
 {
 	unsigned int hashent = hashfn(sb, id, type);
-	struct dquot *dquot, *empty = NODQUOT;
+	struct dquot *dquot = NODQUOT, *empty = NODQUOT;
 
         if (!sb_has_quota_active(sb, type))
 		return NODQUOT;
 we_slept:
 	spin_lock(&dq_list_lock);
+	spin_lock(&dq_state_lock);
+	if (!sb_has_quota_active(sb, type)) {
+		spin_unlock(&dq_state_lock);
+		spin_unlock(&dq_list_lock);
+		goto out;
+	}
+	spin_unlock(&dq_state_lock);
+
 	if ((dquot = find_dquot(hashent, sb, id, type)) == NODQUOT) {
 		if (empty == NODQUOT) {
 			spin_unlock(&dq_list_lock);
@@ -735,6 +733,7 @@
 			goto we_slept;
 		}
 		dquot = empty;
+		empty = NODQUOT;
 		dquot->dq_id = id;
 		/* all dquots go on the inuse_list */
 		put_inuse(dquot);
@@ -749,8 +748,6 @@
 		dqstats.cache_hits++;
 		dqstats.lookups++;
 		spin_unlock(&dq_list_lock);
-		if (empty)
-			do_destroy_dquot(empty);
 	}
 	/* Wait for dq_lock - after this we know that either dquot_release() is already
 	 * finished or it will be canceled due to dq_count > 1 test */
@@ -758,11 +755,15 @@
 	/* Read the dquot and instantiate it (everything done only if needed) */
 	if (!test_bit(DQ_ACTIVE_B, &dquot->dq_flags) && sb->dq_op->acquire_dquot(dquot) < 0) {
 		dqput(dquot);
-		return NODQUOT;
+		dquot = NODQUOT;
+		goto out;
 	}
 #ifdef __DQUOT_PARANOIA
 	BUG_ON(!dquot->dq_sb);	/* Has somebody invalidated entry under us? */
 #endif
+out:
+	if (empty)
+		do_destroy_dquot(empty);
 
 	return dquot;
 }
@@ -1198,63 +1199,76 @@
 }
 /*
  *	Initialize quota pointers in inode
- *	Transaction must be started at entry
+ *	We do things in a bit complicated way but by that we avoid calling
+ *	dqget() and thus filesystem callbacks under dqptr_sem.
  */
 int dquot_initialize(struct inode *inode, int type)
 {
 	unsigned int id = 0;
 	int cnt, ret = 0;
+	struct dquot *got[MAXQUOTAS] = { NODQUOT, NODQUOT };
+	struct super_block *sb = inode->i_sb;
 
 	/* First test before acquiring mutex - solves deadlocks when we
          * re-enter the quota code and are already holding the mutex */
 	if (IS_NOQUOTA(inode))
 		return 0;
-	down_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
+
+	/* First get references to structures we might need. */
+	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
+		if (type != -1 && cnt != type)
+			continue;
+		switch (cnt) {
+		case USRQUOTA:
+			id = inode->i_uid;
+			break;
+		case GRPQUOTA:
+			id = inode->i_gid;
+			break;
+		}
+		got[cnt] = dqget(sb, id, cnt);
+	}
+
+	down_write(&sb_dqopt(sb)->dqptr_sem);
 	/* Having dqptr_sem we know NOQUOTA flags can't be altered... */
 	if (IS_NOQUOTA(inode))
 		goto out_err;
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
 		if (type != -1 && cnt != type)
 			continue;
+		/* Avoid races with quotaoff() */
+		if (!sb_has_quota_active(sb, cnt))
+			continue;
 		if (inode->i_dquot[cnt] == NODQUOT) {
-			switch (cnt) {
-				case USRQUOTA:
-					id = inode->i_uid;
-					break;
-				case GRPQUOTA:
-					id = inode->i_gid;
-					break;
-			}
-			inode->i_dquot[cnt] = dqget(inode->i_sb, id, cnt);
+			inode->i_dquot[cnt] = got[cnt];
+			got[cnt] = NODQUOT;
 		}
 	}
 out_err:
-	up_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
+	up_write(&sb_dqopt(sb)->dqptr_sem);
+	/* Drop unused references */
+	for (cnt = 0; cnt < MAXQUOTAS; cnt++)
+		dqput(got[cnt]);
 	return ret;
 }
 
 /*
  * 	Release all quotas referenced by inode
- *	Transaction must be started at an entry
  */
-int dquot_drop_locked(struct inode *inode)
-{
-	int cnt;
-
-	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		if (inode->i_dquot[cnt] != NODQUOT) {
-			dqput(inode->i_dquot[cnt]);
-			inode->i_dquot[cnt] = NODQUOT;
-		}
-	}
-	return 0;
-}
-
 int dquot_drop(struct inode *inode)
 {
+	int cnt;
+	struct dquot *put[MAXQUOTAS];
+
 	down_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
-	dquot_drop_locked(inode);
+	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
+		put[cnt] = inode->i_dquot[cnt];
+		inode->i_dquot[cnt] = NODQUOT;
+	}
 	up_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
+
+	for (cnt = 0; cnt < MAXQUOTAS; cnt++)
+		dqput(put[cnt]);
 	return 0;
 }
 
@@ -1470,8 +1484,9 @@
 	qsize_t space;
 	struct dquot *transfer_from[MAXQUOTAS];
 	struct dquot *transfer_to[MAXQUOTAS];
-	int cnt, ret = NO_QUOTA, chuid = (iattr->ia_valid & ATTR_UID) && inode->i_uid != iattr->ia_uid,
-	    chgid = (iattr->ia_valid & ATTR_GID) && inode->i_gid != iattr->ia_gid;
+	int cnt, ret = QUOTA_OK;
+	int chuid = iattr->ia_valid & ATTR_UID && inode->i_uid != iattr->ia_uid,
+	    chgid = iattr->ia_valid & ATTR_GID && inode->i_gid != iattr->ia_gid;
 	char warntype_to[MAXQUOTAS];
 	char warntype_from_inodes[MAXQUOTAS], warntype_from_space[MAXQUOTAS];
 
@@ -1479,21 +1494,11 @@
          * re-enter the quota code and are already holding the mutex */
 	if (IS_NOQUOTA(inode))
 		return QUOTA_OK;
-	/* Clear the arrays */
+	/* Initialize the arrays */
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		transfer_to[cnt] = transfer_from[cnt] = NODQUOT;
+		transfer_from[cnt] = NODQUOT;
+		transfer_to[cnt] = NODQUOT;
 		warntype_to[cnt] = QUOTA_NL_NOWARN;
-	}
-	down_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
-	/* Now recheck reliably when holding dqptr_sem */
-	if (IS_NOQUOTA(inode)) {	/* File without quota accounting? */
-		up_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
-		return QUOTA_OK;
-	}
-	/* First build the transfer_to list - here we can block on
-	 * reading/instantiating of dquots.  We know that the transaction for
-	 * us was already started so we don't violate lock ranking here */
-	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
 		switch (cnt) {
 			case USRQUOTA:
 				if (!chuid)
@@ -1507,6 +1512,13 @@
 				break;
 		}
 	}
+
+	down_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
+	/* Now recheck reliably when holding dqptr_sem */
+	if (IS_NOQUOTA(inode)) {	/* File without quota accounting? */
+		up_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
+		goto put_all;
+	}
 	spin_lock(&dq_data_lock);
 	space = inode_get_bytes(inode);
 	/* Build the transfer_from list and check the limits */
@@ -1517,7 +1529,7 @@
 		if (check_idq(transfer_to[cnt], 1, warntype_to + cnt) ==
 		    NO_QUOTA || check_bdq(transfer_to[cnt], space, 0,
 		    warntype_to + cnt) == NO_QUOTA)
-			goto warn_put_all;
+			goto over_quota;
 	}
 
 	/*
@@ -1545,28 +1557,37 @@
 
 		inode->i_dquot[cnt] = transfer_to[cnt];
 	}
-	ret = QUOTA_OK;
-warn_put_all:
 	spin_unlock(&dq_data_lock);
+	up_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
+
 	/* Dirtify all the dquots - this can block when journalling */
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
 		if (transfer_from[cnt])
 			mark_dquot_dirty(transfer_from[cnt]);
-		if (transfer_to[cnt])
+		if (transfer_to[cnt]) {
 			mark_dquot_dirty(transfer_to[cnt]);
+			/* The reference we got is transferred to the inode */
+			transfer_to[cnt] = NODQUOT;
+		}
 	}
+warn_put_all:
 	flush_warnings(transfer_to, warntype_to);
 	flush_warnings(transfer_from, warntype_from_inodes);
 	flush_warnings(transfer_from, warntype_from_space);
-	
+put_all:
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		if (ret == QUOTA_OK && transfer_from[cnt] != NODQUOT)
-			dqput(transfer_from[cnt]);
-		if (ret == NO_QUOTA && transfer_to[cnt] != NODQUOT)
-			dqput(transfer_to[cnt]);
+		dqput(transfer_from[cnt]);
+		dqput(transfer_to[cnt]);
 	}
-	up_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
 	return ret;
+over_quota:
+	spin_unlock(&dq_data_lock);
+	up_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
+	/* Clear dquot pointers we don't want to dqput() */
+	for (cnt = 0; cnt < MAXQUOTAS; cnt++)
+		transfer_from[cnt] = NODQUOT;
+	ret = NO_QUOTA;
+	goto warn_put_all;
 }
 
 /* Wrapper for transferring ownership of an inode */
@@ -1651,19 +1672,24 @@
 			continue;
 
 		if (flags & DQUOT_SUSPENDED) {
+			spin_lock(&dq_state_lock);
 			dqopt->flags |=
 				dquot_state_flag(DQUOT_SUSPENDED, cnt);
+			spin_unlock(&dq_state_lock);
 		} else {
+			spin_lock(&dq_state_lock);
 			dqopt->flags &= ~dquot_state_flag(flags, cnt);
 			/* Turning off suspended quotas? */
 			if (!sb_has_quota_loaded(sb, cnt) &&
 			    sb_has_quota_suspended(sb, cnt)) {
 				dqopt->flags &=	~dquot_state_flag(
 							DQUOT_SUSPENDED, cnt);
+				spin_unlock(&dq_state_lock);
 				iput(dqopt->files[cnt]);
 				dqopt->files[cnt] = NULL;
 				continue;
 			}
+			spin_unlock(&dq_state_lock);
 		}
 
 		/* We still have to keep quota loaded? */
@@ -1830,7 +1856,9 @@
 	}
 	mutex_unlock(&dqopt->dqio_mutex);
 	mutex_unlock(&inode->i_mutex);
+	spin_lock(&dq_state_lock);
 	dqopt->flags |= dquot_state_flag(flags, type);
+	spin_unlock(&dq_state_lock);
 
 	add_dquot_ref(sb, type);
 	mutex_unlock(&dqopt->dqonoff_mutex);
@@ -1872,9 +1900,11 @@
 	}
 	inode = dqopt->files[type];
 	dqopt->files[type] = NULL;
+	spin_lock(&dq_state_lock);
 	flags = dqopt->flags & dquot_state_flag(DQUOT_USAGE_ENABLED |
 						DQUOT_LIMITS_ENABLED, type);
 	dqopt->flags &= ~dquot_state_flag(DQUOT_STATE_FLAGS, type);
+	spin_unlock(&dq_state_lock);
 	mutex_unlock(&dqopt->dqonoff_mutex);
 
 	flags = dquot_generic_flag(flags, type);
@@ -1952,7 +1982,9 @@
 			ret = -EBUSY;
 			goto out_lock;
 		}
+		spin_lock(&dq_state_lock);
 		sb_dqopt(sb)->flags |= dquot_state_flag(flags, type);
+		spin_unlock(&dq_state_lock);
 out_lock:
 		mutex_unlock(&dqopt->dqonoff_mutex);
 		return ret;
@@ -2039,14 +2071,12 @@
 {
 	struct dquot *dquot;
 
-	mutex_lock(&sb_dqopt(sb)->dqonoff_mutex);
-	if (!(dquot = dqget(sb, id, type))) {
-		mutex_unlock(&sb_dqopt(sb)->dqonoff_mutex);
+	dquot = dqget(sb, id, type);
+	if (dquot == NODQUOT)
 		return -ESRCH;
-	}
 	do_get_dqblk(dquot, di);
 	dqput(dquot);
-	mutex_unlock(&sb_dqopt(sb)->dqonoff_mutex);
+
 	return 0;
 }
 
@@ -2130,7 +2160,6 @@
 	struct dquot *dquot;
 	int rc;
 
-	mutex_lock(&sb_dqopt(sb)->dqonoff_mutex);
 	dquot = dqget(sb, id, type);
 	if (!dquot) {
 		rc = -ESRCH;
@@ -2139,7 +2168,6 @@
 	rc = do_set_dqblk(dquot, di);
 	dqput(dquot);
 out:
-	mutex_unlock(&sb_dqopt(sb)->dqonoff_mutex);
 	return rc;
 }
 
@@ -2370,11 +2398,9 @@
 EXPORT_SYMBOL(dquot_mark_dquot_dirty);
 EXPORT_SYMBOL(dquot_initialize);
 EXPORT_SYMBOL(dquot_drop);
-EXPORT_SYMBOL(dquot_drop_locked);
 EXPORT_SYMBOL(vfs_dq_drop);
 EXPORT_SYMBOL(dqget);
 EXPORT_SYMBOL(dqput);
-EXPORT_SYMBOL(dquot_is_cached);
 EXPORT_SYMBOL(dquot_alloc_space);
 EXPORT_SYMBOL(dquot_alloc_inode);
 EXPORT_SYMBOL(dquot_free_space);
diff --git a/fs/ecryptfs/Kconfig b/fs/ecryptfs/Kconfig
new file mode 100644
index 0000000..0c754e6
--- /dev/null
+++ b/fs/ecryptfs/Kconfig
@@ -0,0 +1,11 @@
+config ECRYPT_FS
+	tristate "eCrypt filesystem layer support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && KEYS && CRYPTO && NET
+	help
+	  Encrypted filesystem that operates on the VFS layer.  See
+	  <file:Documentation/filesystems/ecryptfs.txt> to learn more about
+	  eCryptfs.  Userspace components are required and can be
+	  obtained from <http://ecryptfs.sf.net>.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called ecryptfs.
diff --git a/fs/efs/Kconfig b/fs/efs/Kconfig
new file mode 100644
index 0000000..6ebfc1c
--- /dev/null
+++ b/fs/efs/Kconfig
@@ -0,0 +1,14 @@
+config EFS_FS
+	tristate "EFS file system support (read only) (EXPERIMENTAL)"
+	depends on BLOCK && EXPERIMENTAL
+	help
+	  EFS is an older file system used for non-ISO9660 CD-ROMs and hard
+	  disk partitions by SGI's IRIX operating system (IRIX 6.0 and newer
+	  uses the XFS file system for hard disk partitions however).
+
+	  This implementation only offers read-only access. If you don't know
+	  what all this is about, it's safe to say N. For more information
+	  about EFS see its home page at <http://aeschi.ch.eu.org/efs/>.
+
+	  To compile the EFS file system support as a module, choose M here: the
+	  module will be called efs.
diff --git a/fs/eventfd.c b/fs/eventfd.c
index 08bf558..5de2c2d 100644
--- a/fs/eventfd.c
+++ b/fs/eventfd.c
@@ -198,7 +198,7 @@
 	return file;
 }
 
-asmlinkage long sys_eventfd2(unsigned int count, int flags)
+SYSCALL_DEFINE2(eventfd2, unsigned int, count, int, flags)
 {
 	int fd;
 	struct eventfd_ctx *ctx;
@@ -228,8 +228,7 @@
 	return fd;
 }
 
-asmlinkage long sys_eventfd(unsigned int count)
+SYSCALL_DEFINE1(eventfd, unsigned int, count)
 {
 	return sys_eventfd2(count, 0);
 }
-
diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index 96355d50..ba2f9ec 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -1110,7 +1110,7 @@
 /*
  * Open an eventpoll file descriptor.
  */
-asmlinkage long sys_epoll_create1(int flags)
+SYSCALL_DEFINE1(epoll_create1, int, flags)
 {
 	int error, fd = -1;
 	struct eventpoll *ep;
@@ -1150,7 +1150,7 @@
 	return fd;
 }
 
-asmlinkage long sys_epoll_create(int size)
+SYSCALL_DEFINE1(epoll_create, int, size)
 {
 	if (size < 0)
 		return -EINVAL;
@@ -1163,8 +1163,8 @@
  * the eventpoll file that enables the insertion/removal/change of
  * file descriptors inside the interest set.
  */
-asmlinkage long sys_epoll_ctl(int epfd, int op, int fd,
-			      struct epoll_event __user *event)
+SYSCALL_DEFINE4(epoll_ctl, int, epfd, int, op, int, fd,
+		struct epoll_event __user *, event)
 {
 	int error;
 	struct file *file, *tfile;
@@ -1261,8 +1261,8 @@
  * Implement the event wait interface for the eventpoll file. It is the kernel
  * part of the user space epoll_wait(2).
  */
-asmlinkage long sys_epoll_wait(int epfd, struct epoll_event __user *events,
-			       int maxevents, int timeout)
+SYSCALL_DEFINE4(epoll_wait, int, epfd, struct epoll_event __user *, events,
+		int, maxevents, int, timeout)
 {
 	int error;
 	struct file *file;
@@ -1319,9 +1319,9 @@
  * Implement the event wait interface for the eventpoll file. It is the kernel
  * part of the user space epoll_pwait(2).
  */
-asmlinkage long sys_epoll_pwait(int epfd, struct epoll_event __user *events,
-		int maxevents, int timeout, const sigset_t __user *sigmask,
-		size_t sigsetsize)
+SYSCALL_DEFINE6(epoll_pwait, int, epfd, struct epoll_event __user *, events,
+		int, maxevents, int, timeout, const sigset_t __user *, sigmask,
+		size_t, sigsetsize)
 {
 	int error;
 	sigset_t ksigmask, sigsaved;
diff --git a/fs/exec.c b/fs/exec.c
index 71a6efe..0dd60a0 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -99,7 +99,7 @@
  *
  * Also note that we take the address to load from from the file itself.
  */
-asmlinkage long sys_uselib(const char __user * library)
+SYSCALL_DEFINE1(uselib, const char __user *, library)
 {
 	struct file *file;
 	struct nameidata nd;
diff --git a/fs/ext2/dir.c b/fs/ext2/dir.c
index 9a0fc40..2999d72 100644
--- a/fs/ext2/dir.c
+++ b/fs/ext2/dir.c
@@ -95,10 +95,13 @@
 		mark_inode_dirty(dir);
 	}
 
-	if (IS_DIRSYNC(dir))
+	if (IS_DIRSYNC(dir)) {
 		err = write_one_page(page, 1);
-	else
+		if (!err)
+			err = ext2_sync_inode(dir);
+	} else {
 		unlock_page(page);
+	}
 
 	return err;
 }
diff --git a/fs/fat/Kconfig b/fs/fat/Kconfig
new file mode 100644
index 0000000..d0a69ff
--- /dev/null
+++ b/fs/fat/Kconfig
@@ -0,0 +1,97 @@
+config FAT_FS
+	tristate
+	select NLS
+	help
+	  If you want to use one of the FAT-based file systems (the MS-DOS and
+	  VFAT (Windows 95) file systems), then you must say Y or M here
+	  to include FAT support. You will then be able to mount partitions or
+	  diskettes with FAT-based file systems and transparently access the
+	  files on them, i.e. MSDOS files will look and behave just like all
+	  other Unix files.
+
+	  This FAT support is not a file system in itself, it only provides
+	  the foundation for the other file systems. You will have to say Y or
+	  M to at least one of "MSDOS fs support" or "VFAT fs support" in
+	  order to make use of it.
+
+	  Another way to read and write MSDOS floppies and hard drive
+	  partitions from within Linux (but not transparently) is with the
+	  mtools ("man mtools") program suite. You don't need to say Y here in
+	  order to do that.
+
+	  If you need to move large files on floppies between a DOS and a
+	  Linux box, say Y here, mount the floppy under Linux with an MSDOS
+	  file system and use GNU tar's M option. GNU tar is a program
+	  available for Unix and DOS ("man tar" or "info tar").
+
+	  The FAT support will enlarge your kernel by about 37 KB. If unsure,
+	  say Y.
+
+	  To compile this as a module, choose M here: the module will be called
+	  fat.  Note that if you compile the FAT support as a module, you
+	  cannot compile any of the FAT-based file systems into the kernel
+	  -- they will have to be modules as well.
+
+config MSDOS_FS
+	tristate "MSDOS fs support"
+	select FAT_FS
+	help
+	  This allows you to mount MSDOS partitions of your hard drive (unless
+	  they are compressed; to access compressed MSDOS partitions under
+	  Linux, you can either use the DOS emulator DOSEMU, described in the
+	  DOSEMU-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>, or try dmsdosfs in
+	  <ftp://ibiblio.org/pub/Linux/system/filesystems/dosfs/>. If you
+	  intend to use dosemu with a non-compressed MSDOS partition, say Y
+	  here) and MSDOS floppies. This means that file access becomes
+	  transparent, i.e. the MSDOS files look and behave just like all
+	  other Unix files.
+
+	  If you have Windows 95 or Windows NT installed on your MSDOS
+	  partitions, you should use the VFAT file system (say Y to "VFAT fs
+	  support" below), or you will not be able to see the long filenames
+	  generated by Windows 95 / Windows NT.
+
+	  This option will enlarge your kernel by about 7 KB. If unsure,
+	  answer Y. This will only work if you said Y to "DOS FAT fs support"
+	  as well. To compile this as a module, choose M here: the module will
+	  be called msdos.
+
+config VFAT_FS
+	tristate "VFAT (Windows-95) fs support"
+	select FAT_FS
+	help
+	  This option provides support for normal Windows file systems with
+	  long filenames.  That includes non-compressed FAT-based file systems
+	  used by Windows 95, Windows 98, Windows NT 4.0, and the Unix
+	  programs from the mtools package.
+
+	  The VFAT support enlarges your kernel by about 10 KB and it only
+	  works if you said Y to the "DOS FAT fs support" above.  Please read
+	  the file <file:Documentation/filesystems/vfat.txt> for details.  If
+	  unsure, say Y.
+
+	  To compile this as a module, choose M here: the module will be called
+	  vfat.
+
+config FAT_DEFAULT_CODEPAGE
+	int "Default codepage for FAT"
+	depends on MSDOS_FS || VFAT_FS
+	default 437
+	help
+	  This option should be set to the codepage of your FAT filesystems.
+	  It can be overridden with the "codepage" mount option.
+	  See <file:Documentation/filesystems/vfat.txt> for more information.
+
+config FAT_DEFAULT_IOCHARSET
+	string "Default iocharset for FAT"
+	depends on VFAT_FS
+	default "iso8859-1"
+	help
+	  Set this to the default input/output character set you'd
+	  like FAT to use. It should probably match the character set
+	  that most of your FAT filesystems use, and can be overridden
+	  with the "iocharset" mount option for FAT filesystems.
+	  Note that "utf8" is not recommended for FAT filesystems.
+	  If unsure, you shouldn't set "utf8" here.
+	  See <file:Documentation/filesystems/vfat.txt> for more information.
diff --git a/fs/fcntl.c b/fs/fcntl.c
index cdc1419..bd215cc 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -50,7 +50,7 @@
 	return res;
 }
 
-asmlinkage long sys_dup3(unsigned int oldfd, unsigned int newfd, int flags)
+SYSCALL_DEFINE3(dup3, unsigned int, oldfd, unsigned int, newfd, int, flags)
 {
 	int err = -EBADF;
 	struct file * file, *tofree;
@@ -113,7 +113,7 @@
 	return err;
 }
 
-asmlinkage long sys_dup2(unsigned int oldfd, unsigned int newfd)
+SYSCALL_DEFINE2(dup2, unsigned int, oldfd, unsigned int, newfd)
 {
 	if (unlikely(newfd == oldfd)) { /* corner case */
 		struct files_struct *files = current->files;
@@ -126,7 +126,7 @@
 	return sys_dup3(oldfd, newfd, 0);
 }
 
-asmlinkage long sys_dup(unsigned int fildes)
+SYSCALL_DEFINE1(dup, unsigned int, fildes)
 {
 	int ret = -EBADF;
 	struct file *file = fget(fildes);
@@ -335,7 +335,7 @@
 	return err;
 }
 
-asmlinkage long sys_fcntl(unsigned int fd, unsigned int cmd, unsigned long arg)
+SYSCALL_DEFINE3(fcntl, unsigned int, fd, unsigned int, cmd, unsigned long, arg)
 {	
 	struct file *filp;
 	long err = -EBADF;
@@ -358,7 +358,8 @@
 }
 
 #if BITS_PER_LONG == 32
-asmlinkage long sys_fcntl64(unsigned int fd, unsigned int cmd, unsigned long arg)
+SYSCALL_DEFINE3(fcntl64, unsigned int, fd, unsigned int, cmd,
+		unsigned long, arg)
 {	
 	struct file * filp;
 	long err;
diff --git a/fs/filesystems.c b/fs/filesystems.c
index d488dcd..1aa7026 100644
--- a/fs/filesystems.c
+++ b/fs/filesystems.c
@@ -179,7 +179,7 @@
 /*
  * Whee.. Weird sysv syscall. 
  */
-asmlinkage long sys_sysfs(int option, unsigned long arg1, unsigned long arg2)
+SYSCALL_DEFINE3(sysfs, int, option, unsigned long, arg1, unsigned long, arg2)
 {
 	int retval = -EINVAL;
 
diff --git a/fs/freevxfs/Kconfig b/fs/freevxfs/Kconfig
new file mode 100644
index 0000000..8dc1cd5
--- /dev/null
+++ b/fs/freevxfs/Kconfig
@@ -0,0 +1,16 @@
+config VXFS_FS
+	tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)"
+	depends on BLOCK
+	help
+	  FreeVxFS is a file system driver that support the VERITAS VxFS(TM)
+	  file system format.  VERITAS VxFS(TM) is the standard file system
+	  of SCO UnixWare (and possibly others) and optionally available
+	  for Sunsoft Solaris, HP-UX and many other operating systems.
+	  Currently only readonly access is supported.
+
+	  NOTE: the file system type as used by mount(1), mount(2) and
+	  fstab(5) is 'vxfs' as it describes the file system format, not
+	  the actual driver.
+
+	  To compile this as a module, choose M here: the module will be
+	  called freevxfs.  If unsure, say N.
diff --git a/fs/fuse/Kconfig b/fs/fuse/Kconfig
new file mode 100644
index 0000000..0cf160a
--- /dev/null
+++ b/fs/fuse/Kconfig
@@ -0,0 +1,15 @@
+config FUSE_FS
+	tristate "FUSE (Filesystem in Userspace) support"
+	help
+	  With FUSE it is possible to implement a fully functional filesystem
+	  in a userspace program.
+
+	  There's also companion library: libfuse.  This library along with
+	  utilities is available from the FUSE homepage:
+	  <http://fuse.sourceforge.net/>
+
+	  See <file:Documentation/filesystems/fuse.txt> for more information.
+	  See <file:Documentation/Changes> for needed library/utility version.
+
+	  If you want to develop a userspace FS, or if you want to use
+	  a filesystem based on FUSE, answer Y or M.
diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index e0c7ada..ba76b68 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -281,7 +281,8 @@
 			fc->blocked = 0;
 			wake_up_all(&fc->blocked_waitq);
 		}
-		if (fc->num_background == FUSE_CONGESTION_THRESHOLD) {
+		if (fc->num_background == FUSE_CONGESTION_THRESHOLD &&
+		    fc->connected) {
 			clear_bdi_congested(&fc->bdi, READ);
 			clear_bdi_congested(&fc->bdi, WRITE);
 		}
@@ -825,16 +826,21 @@
 			    struct fuse_copy_state *cs)
 {
 	struct fuse_notify_poll_wakeup_out outarg;
-	int err;
+	int err = -EINVAL;
 
 	if (size != sizeof(outarg))
-		return -EINVAL;
+		goto err;
 
 	err = fuse_copy_one(cs, &outarg, sizeof(outarg));
 	if (err)
-		return err;
+		goto err;
 
+	fuse_copy_finish(cs);
 	return fuse_notify_poll_wakeup(fc, &outarg);
+
+err:
+	fuse_copy_finish(cs);
+	return err;
 }
 
 static int fuse_notify(struct fuse_conn *fc, enum fuse_notify_code code,
@@ -845,6 +851,7 @@
 		return fuse_notify_poll(fc, size, cs);
 
 	default:
+		fuse_copy_finish(cs);
 		return -EINVAL;
 	}
 }
@@ -923,7 +930,6 @@
 	 */
 	if (!oh.unique) {
 		err = fuse_notify(fc, oh.error, nbytes - sizeof(oh), &cs);
-		fuse_copy_finish(&cs);
 		return err ? err : nbytes;
 	}
 
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index e816264..d9fdb7c 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -54,7 +54,7 @@
 		ff->reserved_req = fuse_request_alloc();
 		if (!ff->reserved_req) {
 			kfree(ff);
-			ff = NULL;
+			return NULL;
 		} else {
 			INIT_LIST_HEAD(&ff->write_entry);
 			atomic_set(&ff->count, 0);
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 47c96fd..459b73d 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -292,6 +292,7 @@
 	list_del(&fc->entry);
 	fuse_ctl_remove_conn(fc);
 	mutex_unlock(&fuse_mutex);
+	bdi_destroy(&fc->bdi);
 	fuse_conn_put(fc);
 }
 
@@ -532,7 +533,6 @@
 		if (fc->destroy_req)
 			fuse_request_free(fc->destroy_req);
 		mutex_destroy(&fc->inst_mutex);
-		bdi_destroy(&fc->bdi);
 		fc->release(fc);
 	}
 }
@@ -805,16 +805,18 @@
 	int err;
 	int is_bdev = sb->s_bdev != NULL;
 
+	err = -EINVAL;
 	if (sb->s_flags & MS_MANDLOCK)
-		return -EINVAL;
+		goto err;
 
 	if (!parse_fuse_opt((char *) data, &d, is_bdev))
-		return -EINVAL;
+		goto err;
 
 	if (is_bdev) {
 #ifdef CONFIG_BLOCK
+		err = -EINVAL;
 		if (!sb_set_blocksize(sb, d.blksize))
-			return -EINVAL;
+			goto err;
 #endif
 	} else {
 		sb->s_blocksize = PAGE_CACHE_SIZE;
@@ -826,20 +828,22 @@
 	sb->s_export_op = &fuse_export_operations;
 
 	file = fget(d.fd);
+	err = -EINVAL;
 	if (!file)
-		return -EINVAL;
+		goto err;
 
 	if (file->f_op != &fuse_dev_operations)
-		return -EINVAL;
+		goto err_fput;
 
 	fc = kmalloc(sizeof(*fc), GFP_KERNEL);
+	err = -ENOMEM;
 	if (!fc)
-		return -ENOMEM;
+		goto err_fput;
 
 	err = fuse_conn_init(fc, sb);
 	if (err) {
 		kfree(fc);
-		return err;
+		goto err_fput;
 	}
 
 	fc->release = fuse_free_conn;
@@ -854,12 +858,12 @@
 	err = -ENOMEM;
 	root = fuse_get_root_inode(sb, d.rootmode);
 	if (!root)
-		goto err;
+		goto err_put_conn;
 
 	root_dentry = d_alloc_root(root);
 	if (!root_dentry) {
 		iput(root);
-		goto err;
+		goto err_put_conn;
 	}
 
 	init_req = fuse_request_alloc();
@@ -903,9 +907,11 @@
 	fuse_request_free(init_req);
  err_put_root:
 	dput(root_dentry);
- err:
-	fput(file);
+ err_put_conn:
 	fuse_conn_put(fc);
+ err_fput:
+	fput(file);
+ err:
 	return err;
 }
 
diff --git a/fs/hfs/Kconfig b/fs/hfs/Kconfig
new file mode 100644
index 0000000..b77c5bc
--- /dev/null
+++ b/fs/hfs/Kconfig
@@ -0,0 +1,12 @@
+config HFS_FS
+	tristate "Apple Macintosh file system support (EXPERIMENTAL)"
+	depends on BLOCK && EXPERIMENTAL
+	select NLS
+	help
+	  If you say Y here, you will be able to mount Macintosh-formatted
+	  floppy disks and hard drive partitions with full read-write access.
+	  Please read <file:Documentation/filesystems/hfs.txt> to learn about
+	  the available mount options.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called hfs.
diff --git a/fs/hfsplus/Kconfig b/fs/hfsplus/Kconfig
new file mode 100644
index 0000000..a633718
--- /dev/null
+++ b/fs/hfsplus/Kconfig
@@ -0,0 +1,13 @@
+config HFSPLUS_FS
+	tristate "Apple Extended HFS file system support"
+	depends on BLOCK
+	select NLS
+	select NLS_UTF8
+	help
+	  If you say Y here, you will be able to mount extended format
+	  Macintosh-formatted hard drive partitions with full read-write access.
+
+	  This file system is often called HFS+ and was introduced with
+	  MacOS 8. It includes all Mac specific filesystem data such as
+	  data forks and creator codes, but it also has several UNIX
+	  style features such as file ownership and permissions.
diff --git a/fs/hpfs/Kconfig b/fs/hpfs/Kconfig
new file mode 100644
index 0000000..56bd15c
--- /dev/null
+++ b/fs/hpfs/Kconfig
@@ -0,0 +1,14 @@
+config HPFS_FS
+	tristate "OS/2 HPFS file system support"
+	depends on BLOCK
+	help
+	  OS/2 is IBM's operating system for PC's, the same as Warp, and HPFS
+	  is the file system used for organizing files on OS/2 hard disk
+	  partitions. Say Y if you want to be able to read files from and
+	  write files to an OS/2 HPFS partition on your hard drive. OS/2
+	  floppies however are in regular MSDOS format, so you don't need this
+	  option in order to be able to read them. Read
+	  <file:Documentation/filesystems/hpfs.txt>.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called hpfs.  If unsure, say N.
diff --git a/fs/ioctl.c b/fs/ioctl.c
index 20b0a8a..240ec639 100644
--- a/fs/ioctl.c
+++ b/fs/ioctl.c
@@ -542,7 +542,7 @@
 	return error;
 }
 
-asmlinkage long sys_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg)
+SYSCALL_DEFINE3(ioctl, unsigned int, fd, unsigned int, cmd, unsigned long, arg)
 {
 	struct file *filp;
 	int error = -EBADF;
diff --git a/fs/ioprio.c b/fs/ioprio.c
index 1a39ac3..c7c0b28 100644
--- a/fs/ioprio.c
+++ b/fs/ioprio.c
@@ -72,7 +72,7 @@
 }
 EXPORT_SYMBOL_GPL(set_task_ioprio);
 
-asmlinkage long sys_ioprio_set(int which, int who, int ioprio)
+SYSCALL_DEFINE3(ioprio_set, int, which, int, who, int, ioprio)
 {
 	int class = IOPRIO_PRIO_CLASS(ioprio);
 	int data = IOPRIO_PRIO_DATA(ioprio);
@@ -188,7 +188,7 @@
 		return aprio;
 }
 
-asmlinkage long sys_ioprio_get(int which, int who)
+SYSCALL_DEFINE2(ioprio_get, int, which, int, who)
 {
 	struct task_struct *g, *p;
 	struct user_struct *user;
@@ -252,4 +252,3 @@
 	read_unlock(&tasklist_lock);
 	return ret;
 }
-
diff --git a/fs/isofs/Kconfig b/fs/isofs/Kconfig
new file mode 100644
index 0000000..8ab9878
--- /dev/null
+++ b/fs/isofs/Kconfig
@@ -0,0 +1,39 @@
+config ISO9660_FS
+	tristate "ISO 9660 CDROM file system support"
+	help
+	  This is the standard file system used on CD-ROMs.  It was previously
+	  known as "High Sierra File System" and is called "hsfs" on other
+	  Unix systems.  The so-called Rock-Ridge extensions which allow for
+	  long Unix filenames and symbolic links are also supported by this
+	  driver.  If you have a CD-ROM drive and want to do more with it than
+	  just listen to audio CDs and watch its LEDs, say Y (and read
+	  <file:Documentation/filesystems/isofs.txt> and the CD-ROM-HOWTO,
+	  available from <http://www.tldp.org/docs.html#howto>), thereby
+	  enlarging your kernel by about 27 KB; otherwise say N.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called isofs.
+
+config JOLIET
+	bool "Microsoft Joliet CDROM extensions"
+	depends on ISO9660_FS
+	select NLS
+	help
+	  Joliet is a Microsoft extension for the ISO 9660 CD-ROM file system
+	  which allows for long filenames in unicode format (unicode is the
+	  new 16 bit character code, successor to ASCII, which encodes the
+	  characters of almost all languages of the world; see
+	  <http://www.unicode.org/> for more information).  Say Y here if you
+	  want to be able to read Joliet CD-ROMs under Linux.
+
+config ZISOFS
+	bool "Transparent decompression extension"
+	depends on ISO9660_FS
+	select ZLIB_INFLATE
+	help
+	  This is a Linux-specific extension to RockRidge which lets you store
+	  data in compressed form on a CD-ROM and have it transparently
+	  decompressed when the CD-ROM is accessed.  See
+	  <http://www.kernel.org/pub/linux/utils/fs/zisofs/> for the tools
+	  necessary to create such a filesystem.  Say Y here if you want to be
+	  able to read such compressed CD-ROMs.
diff --git a/fs/jfs/Kconfig b/fs/jfs/Kconfig
new file mode 100644
index 0000000..9ff619a
--- /dev/null
+++ b/fs/jfs/Kconfig
@@ -0,0 +1,49 @@
+config JFS_FS
+	tristate "JFS filesystem support"
+	select NLS
+	help
+	  This is a port of IBM's Journaled Filesystem .  More information is
+	  available in the file <file:Documentation/filesystems/jfs.txt>.
+
+	  If you do not intend to use the JFS filesystem, say N.
+
+config JFS_POSIX_ACL
+	bool "JFS POSIX Access Control Lists"
+	depends on JFS_FS
+	select FS_POSIX_ACL
+	help
+	  Posix Access Control Lists (ACLs) support permissions for users and
+	  groups beyond the owner/group/world scheme.
+
+	  To learn more about Access Control Lists, visit the Posix ACLs for
+	  Linux website <http://acl.bestbits.at/>.
+
+	  If you don't know what Access Control Lists are, say N
+
+config JFS_SECURITY
+	bool "JFS Security Labels"
+	depends on JFS_FS
+	help
+	  Security labels support alternative access control models
+	  implemented by security modules like SELinux.  This option
+	  enables an extended attribute handler for file security
+	  labels in the jfs filesystem.
+
+	  If you are not using a security module that requires using
+	  extended attributes for file security labels, say N.
+
+config JFS_DEBUG
+	bool "JFS debugging"
+	depends on JFS_FS
+	help
+	  If you are experiencing any problems with the JFS filesystem, say
+	  Y here.  This will result in additional debugging messages to be
+	  written to the system log.  Under normal circumstances, this
+	  results in very little overhead.
+
+config JFS_STATISTICS
+	bool "JFS statistics"
+	depends on JFS_FS
+	help
+	  Enabling this option will cause statistics from the JFS file system
+	  to be made available to the user in the /proc/fs/jfs/ directory.
diff --git a/fs/locks.c b/fs/locks.c
index 46a2e12..ec3deea 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -1564,7 +1564,7 @@
  *	%LOCK_MAND can be combined with %LOCK_READ or %LOCK_WRITE to allow other
  *	processes read and write access respectively.
  */
-asmlinkage long sys_flock(unsigned int fd, unsigned int cmd)
+SYSCALL_DEFINE2(flock, unsigned int, fd, unsigned int, cmd)
 {
 	struct file *filp;
 	struct file_lock *lock;
diff --git a/fs/minix/Kconfig b/fs/minix/Kconfig
new file mode 100644
index 0000000..0fd7ca9
--- /dev/null
+++ b/fs/minix/Kconfig
@@ -0,0 +1,17 @@
+config MINIX_FS
+	tristate "Minix file system support"
+	depends on BLOCK
+	help
+	  Minix is a simple operating system used in many classes about OS's.
+	  The minix file system (method to organize files on a hard disk
+	  partition or a floppy disk) was the original file system for Linux,
+	  but has been superseded by the second extended file system ext2fs.
+	  You don't want to use the minix file system on your hard disk
+	  because of certain built-in restrictions, but it is sometimes found
+	  on older Linux floppy disks.  This option will enlarge your kernel
+	  by about 28 KB. If unsure, say N.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called minix.  Note that the file system of your root
+	  partition (the one containing the directory /) cannot be compiled as
+	  a module.
diff --git a/fs/namei.c b/fs/namei.c
index f05bed2..bbc15c2 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -1962,8 +1962,8 @@
 	}
 }
 
-asmlinkage long sys_mknodat(int dfd, const char __user *filename, int mode,
-				unsigned dev)
+SYSCALL_DEFINE4(mknodat, int, dfd, const char __user *, filename, int, mode,
+		unsigned, dev)
 {
 	int error;
 	char *tmp;
@@ -2017,7 +2017,7 @@
 	return error;
 }
 
-asmlinkage long sys_mknod(const char __user *filename, int mode, unsigned dev)
+SYSCALL_DEFINE3(mknod, const char __user *, filename, int, mode, unsigned, dev)
 {
 	return sys_mknodat(AT_FDCWD, filename, mode, dev);
 }
@@ -2044,7 +2044,7 @@
 	return error;
 }
 
-asmlinkage long sys_mkdirat(int dfd, const char __user *pathname, int mode)
+SYSCALL_DEFINE3(mkdirat, int, dfd, const char __user *, pathname, int, mode)
 {
 	int error = 0;
 	char * tmp;
@@ -2081,7 +2081,7 @@
 	return error;
 }
 
-asmlinkage long sys_mkdir(const char __user *pathname, int mode)
+SYSCALL_DEFINE2(mkdir, const char __user *, pathname, int, mode)
 {
 	return sys_mkdirat(AT_FDCWD, pathname, mode);
 }
@@ -2195,7 +2195,7 @@
 	return error;
 }
 
-asmlinkage long sys_rmdir(const char __user *pathname)
+SYSCALL_DEFINE1(rmdir, const char __user *, pathname)
 {
 	return do_rmdir(AT_FDCWD, pathname);
 }
@@ -2291,7 +2291,7 @@
 	goto exit2;
 }
 
-asmlinkage long sys_unlinkat(int dfd, const char __user *pathname, int flag)
+SYSCALL_DEFINE3(unlinkat, int, dfd, const char __user *, pathname, int, flag)
 {
 	if ((flag & ~AT_REMOVEDIR) != 0)
 		return -EINVAL;
@@ -2302,7 +2302,7 @@
 	return do_unlinkat(dfd, pathname);
 }
 
-asmlinkage long sys_unlink(const char __user *pathname)
+SYSCALL_DEFINE1(unlink, const char __user *, pathname)
 {
 	return do_unlinkat(AT_FDCWD, pathname);
 }
@@ -2328,8 +2328,8 @@
 	return error;
 }
 
-asmlinkage long sys_symlinkat(const char __user *oldname,
-			      int newdfd, const char __user *newname)
+SYSCALL_DEFINE3(symlinkat, const char __user *, oldname,
+		int, newdfd, const char __user *, newname)
 {
 	int error;
 	char *from;
@@ -2370,7 +2370,7 @@
 	return error;
 }
 
-asmlinkage long sys_symlink(const char __user *oldname, const char __user *newname)
+SYSCALL_DEFINE2(symlink, const char __user *, oldname, const char __user *, newname)
 {
 	return sys_symlinkat(oldname, AT_FDCWD, newname);
 }
@@ -2422,9 +2422,8 @@
  * with linux 2.0, and to avoid hard-linking to directories
  * and other special files.  --ADM
  */
-asmlinkage long sys_linkat(int olddfd, const char __user *oldname,
-			   int newdfd, const char __user *newname,
-			   int flags)
+SYSCALL_DEFINE5(linkat, int, olddfd, const char __user *, oldname,
+		int, newdfd, const char __user *, newname, int, flags)
 {
 	struct dentry *new_dentry;
 	struct nameidata nd;
@@ -2473,7 +2472,7 @@
 	return error;
 }
 
-asmlinkage long sys_link(const char __user *oldname, const char __user *newname)
+SYSCALL_DEFINE2(link, const char __user *, oldname, const char __user *, newname)
 {
 	return sys_linkat(AT_FDCWD, oldname, AT_FDCWD, newname, 0);
 }
@@ -2624,8 +2623,8 @@
 	return error;
 }
 
-asmlinkage long sys_renameat(int olddfd, const char __user *oldname,
-			     int newdfd, const char __user *newname)
+SYSCALL_DEFINE4(renameat, int, olddfd, const char __user *, oldname,
+		int, newdfd, const char __user *, newname)
 {
 	struct dentry *old_dir, *new_dir;
 	struct dentry *old_dentry, *new_dentry;
@@ -2718,7 +2717,7 @@
 	return error;
 }
 
-asmlinkage long sys_rename(const char __user *oldname, const char __user *newname)
+SYSCALL_DEFINE2(rename, const char __user *, oldname, const char __user *, newname)
 {
 	return sys_renameat(AT_FDCWD, oldname, AT_FDCWD, newname);
 }
diff --git a/fs/namespace.c b/fs/namespace.c
index a40685d..228d8c4 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1128,7 +1128,7 @@
  * unixes. Our API is identical to OSF/1 to avoid making a mess of AMD
  */
 
-asmlinkage long sys_umount(char __user * name, int flags)
+SYSCALL_DEFINE2(umount, char __user *, name, int, flags)
 {
 	struct path path;
 	int retval;
@@ -1160,7 +1160,7 @@
 /*
  *	The 2.0 compatible umount. No flags.
  */
-asmlinkage long sys_oldumount(char __user * name)
+SYSCALL_DEFINE1(oldumount, char __user *, name)
 {
 	return sys_umount(name, 0);
 }
@@ -2045,9 +2045,8 @@
 	return new_ns;
 }
 
-asmlinkage long sys_mount(char __user * dev_name, char __user * dir_name,
-			  char __user * type, unsigned long flags,
-			  void __user * data)
+SYSCALL_DEFINE5(mount, char __user *, dev_name, char __user *, dir_name,
+		char __user *, type, unsigned long, flags, void __user *, data)
 {
 	int retval;
 	unsigned long data_page;
@@ -2172,8 +2171,8 @@
  *    though, so you may need to say mount --bind /nfs/my_root /nfs/my_root
  *    first.
  */
-asmlinkage long sys_pivot_root(const char __user * new_root,
-			       const char __user * put_old)
+SYSCALL_DEFINE2(pivot_root, const char __user *, new_root,
+		const char __user *, put_old)
 {
 	struct vfsmount *tmp;
 	struct path new, old, parent_path, root_parent, root;
diff --git a/fs/ncpfs/Kconfig b/fs/ncpfs/Kconfig
index 1428084..c931cf2 100644
--- a/fs/ncpfs/Kconfig
+++ b/fs/ncpfs/Kconfig
@@ -1,6 +1,27 @@
 #
 # NCP Filesystem configuration
 #
+config NCP_FS
+	tristate "NCP file system support (to mount NetWare volumes)"
+	depends on IPX!=n || INET
+	help
+	  NCP (NetWare Core Protocol) is a protocol that runs over IPX and is
+	  used by Novell NetWare clients to talk to file servers.  It is to
+	  IPX what NFS is to TCP/IP, if that helps.  Saying Y here allows you
+	  to mount NetWare file server volumes and to access them just like
+	  any other Unix directory.  For details, please read the file
+	  <file:Documentation/filesystems/ncpfs.txt> in the kernel source and
+	  the IPX-HOWTO from <http://www.tldp.org/docs.html#howto>.
+
+	  You do not have to say Y here if you want your Linux box to act as a
+	  file *server* for Novell NetWare clients.
+
+	  General information about how to connect Linux, Windows machines and
+	  Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
+
+	  To compile this as a module, choose M here: the module will be called
+	  ncpfs.  Say N unless you are connected to a Novell network.
+
 config NCPFS_PACKET_SIGNING
 	bool "Packet signatures"
 	depends on NCP_FS
diff --git a/fs/nfs/Kconfig b/fs/nfs/Kconfig
new file mode 100644
index 0000000..36fe20d
--- /dev/null
+++ b/fs/nfs/Kconfig
@@ -0,0 +1,86 @@
+config NFS_FS
+	tristate "NFS client support"
+	depends on INET
+	select LOCKD
+	select SUNRPC
+	select NFS_ACL_SUPPORT if NFS_V3_ACL
+	help
+	  Choose Y here if you want to access files residing on other
+	  computers using Sun's Network File System protocol.  To compile
+	  this file system support as a module, choose M here: the module
+	  will be called nfs.
+
+	  To mount file systems exported by NFS servers, you also need to
+	  install the user space mount.nfs command which can be found in
+	  the Linux nfs-utils package, available from http://linux-nfs.org/.
+	  Information about using the mount command is available in the
+	  mount(8) man page.  More detail about the Linux NFS client
+	  implementation is available via the nfs(5) man page.
+
+	  Below you can choose which versions of the NFS protocol are
+	  available in the kernel to mount NFS servers.  Support for NFS
+	  version 2 (RFC 1094) is always available when NFS_FS is selected.
+
+	  To configure a system which mounts its root file system via NFS
+	  at boot time, say Y here, select "Kernel level IP
+	  autoconfiguration" in the NETWORK menu, and select "Root file
+	  system on NFS" below.  You cannot compile this file system as a
+	  module in this case.
+
+	  If unsure, say N.
+
+config NFS_V3
+	bool "NFS client support for NFS version 3"
+	depends on NFS_FS
+	help
+	  This option enables support for version 3 of the NFS protocol
+	  (RFC 1813) in the kernel's NFS client.
+
+	  If unsure, say Y.
+
+config NFS_V3_ACL
+	bool "NFS client support for the NFSv3 ACL protocol extension"
+	depends on NFS_V3
+	help
+	  Some NFS servers support an auxiliary NFSv3 ACL protocol that
+	  Sun added to Solaris but never became an official part of the
+	  NFS version 3 protocol.  This protocol extension allows
+	  applications on NFS clients to manipulate POSIX Access Control
+	  Lists on files residing on NFS servers.  NFS servers enforce
+	  ACLs on local files whether this protocol is available or not.
+
+	  Choose Y here if your NFS server supports the Solaris NFSv3 ACL
+	  protocol extension and you want your NFS client to allow
+	  applications to access and modify ACLs on files on the server.
+
+	  Most NFS servers don't support the Solaris NFSv3 ACL protocol
+	  extension.  You can choose N here or specify the "noacl" mount
+	  option to prevent your NFS client from trying to use the NFSv3
+	  ACL protocol.
+
+	  If unsure, say N.
+
+config NFS_V4
+	bool "NFS client support for NFS version 4 (EXPERIMENTAL)"
+	depends on NFS_FS && EXPERIMENTAL
+	select RPCSEC_GSS_KRB5
+	help
+	  This option enables support for version 4 of the NFS protocol
+	  (RFC 3530) in the kernel's NFS client.
+
+	  To mount NFS servers using NFSv4, you also need to install user
+	  space programs which can be found in the Linux nfs-utils package,
+	  available from http://linux-nfs.org/.
+
+	  If unsure, say N.
+
+config ROOT_NFS
+	bool "Root file system on NFS"
+	depends on NFS_FS=y && IP_PNP
+	help
+	  If you want your system to mount its root file system via NFS,
+	  choose Y here.  This is common practice for managing systems
+	  without local permanent storage.  For details, read
+	  <file:Documentation/filesystems/nfsroot.txt>.
+
+	  Most people say N here.
diff --git a/fs/nfsctl.c b/fs/nfsctl.c
index b274519..8f9a205 100644
--- a/fs/nfsctl.c
+++ b/fs/nfsctl.c
@@ -86,8 +86,8 @@
 	},
 };
 
-long
-asmlinkage sys_nfsservctl(int cmd, struct nfsctl_arg __user *arg, void __user *res)
+SYSCALL_DEFINE3(nfsservctl, int, cmd, struct nfsctl_arg __user *, arg,
+		void __user *, res)
 {
 	struct file *file;
 	void __user *p = &arg->u;
diff --git a/fs/nfsd/Kconfig b/fs/nfsd/Kconfig
new file mode 100644
index 0000000..44d7d04
--- /dev/null
+++ b/fs/nfsd/Kconfig
@@ -0,0 +1,80 @@
+config NFSD
+	tristate "NFS server support"
+	depends on INET
+	select LOCKD
+	select SUNRPC
+	select EXPORTFS
+	select NFS_ACL_SUPPORT if NFSD_V2_ACL
+	help
+	  Choose Y here if you want to allow other computers to access
+	  files residing on this system using Sun's Network File System
+	  protocol.  To compile the NFS server support as a module,
+	  choose M here: the module will be called nfsd.
+
+	  You may choose to use a user-space NFS server instead, in which
+	  case you can choose N here.
+
+	  To export local file systems using NFS, you also need to install
+	  user space programs which can be found in the Linux nfs-utils
+	  package, available from http://linux-nfs.org/.  More detail about
+	  the Linux NFS server implementation is available via the
+	  exports(5) man page.
+
+	  Below you can choose which versions of the NFS protocol are
+	  available to clients mounting the NFS server on this system.
+	  Support for NFS version 2 (RFC 1094) is always available when
+	  CONFIG_NFSD is selected.
+
+	  If unsure, say N.
+
+config NFSD_V2_ACL
+	bool
+	depends on NFSD
+
+config NFSD_V3
+	bool "NFS server support for NFS version 3"
+	depends on NFSD
+	help
+	  This option enables support in your system's NFS server for
+	  version 3 of the NFS protocol (RFC 1813).
+
+	  If unsure, say Y.
+
+config NFSD_V3_ACL
+	bool "NFS server support for the NFSv3 ACL protocol extension"
+	depends on NFSD_V3
+	select NFSD_V2_ACL
+	help
+	  Solaris NFS servers support an auxiliary NFSv3 ACL protocol that
+	  never became an official part of the NFS version 3 protocol.
+	  This protocol extension allows applications on NFS clients to
+	  manipulate POSIX Access Control Lists on files residing on NFS
+	  servers.  NFS servers enforce POSIX ACLs on local files whether
+	  this protocol is available or not.
+
+	  This option enables support in your system's NFS server for the
+	  NFSv3 ACL protocol extension allowing NFS clients to manipulate
+	  POSIX ACLs on files exported by your system's NFS server.  NFS
+	  clients which support the Solaris NFSv3 ACL protocol can then
+	  access and modify ACLs on your NFS server.
+
+	  To store ACLs on your NFS server, you also need to enable ACL-
+	  related CONFIG options for your local file systems of choice.
+
+	  If unsure, say N.
+
+config NFSD_V4
+	bool "NFS server support for NFS version 4 (EXPERIMENTAL)"
+	depends on NFSD && PROC_FS && EXPERIMENTAL
+	select NFSD_V3
+	select FS_POSIX_ACL
+	select RPCSEC_GSS_KRB5
+	help
+	  This option enables support in your system's NFS server for
+	  version 4 of the NFS protocol (RFC 3530).
+
+	  To export files using NFSv4, you need to install additional user
+	  space programs which can be found in the Linux nfs-utils package,
+	  available from http://linux-nfs.org/.
+
+	  If unsure, say N.
diff --git a/fs/nfsd/auth.c b/fs/nfsd/auth.c
index c903e04..5573508 100644
--- a/fs/nfsd/auth.c
+++ b/fs/nfsd/auth.c
@@ -49,6 +49,8 @@
 		new->fsuid = exp->ex_anon_uid;
 		new->fsgid = exp->ex_anon_gid;
 		gi = groups_alloc(0);
+		if (!gi)
+			goto oom;
 	} else if (flags & NFSEXP_ROOTSQUASH) {
 		if (!new->fsuid)
 			new->fsuid = exp->ex_anon_uid;
@@ -85,6 +87,7 @@
 		new->cap_effective = cap_raise_nfsd_set(new->cap_effective,
 							new->cap_permitted);
 	put_cred(override_creds(new));
+	put_cred(new);
 	return 0;
 
 oom:
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index 88db7d3..b6f60f4 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -2871,7 +2871,6 @@
 		file_lock.fl_owner = (fl_owner_t)lockt->lt_stateowner;
 	file_lock.fl_pid = current->tgid;
 	file_lock.fl_flags = FL_POSIX;
-	file_lock.fl_lmops = &nfsd_posix_mng_ops;
 
 	file_lock.fl_start = lockt->lt_offset;
 	file_lock.fl_end = last_byte_offset(lockt->lt_offset, lockt->lt_length);
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index 81b8644..bed766e 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -427,10 +427,61 @@
 	return ret;
 }
 
+/*
+ * Get an inotify_kernel_event if one exists and is small
+ * enough to fit in "count". Return an error pointer if
+ * not large enough.
+ *
+ * Called with the device ev_mutex held.
+ */
+static struct inotify_kernel_event *get_one_event(struct inotify_device *dev,
+						  size_t count)
+{
+	size_t event_size = sizeof(struct inotify_event);
+	struct inotify_kernel_event *kevent;
+
+	if (list_empty(&dev->events))
+		return NULL;
+
+	kevent = inotify_dev_get_event(dev);
+	if (kevent->name)
+		event_size += kevent->event.len;
+
+	if (event_size > count)
+		return ERR_PTR(-EINVAL);
+
+	remove_kevent(dev, kevent);
+	return kevent;
+}
+
+/*
+ * Copy an event to user space, returning how much we copied.
+ *
+ * We already checked that the event size is smaller than the
+ * buffer we had in "get_one_event()" above.
+ */
+static ssize_t copy_event_to_user(struct inotify_kernel_event *kevent,
+				  char __user *buf)
+{
+	size_t event_size = sizeof(struct inotify_event);
+
+	if (copy_to_user(buf, &kevent->event, event_size))
+		return -EFAULT;
+
+	if (kevent->name) {
+		buf += event_size;
+
+		if (copy_to_user(buf, kevent->name, kevent->event.len))
+			return -EFAULT;
+
+		event_size += kevent->event.len;
+	}
+	return event_size;
+}
+
 static ssize_t inotify_read(struct file *file, char __user *buf,
 			    size_t count, loff_t *pos)
 {
-	size_t event_size = sizeof (struct inotify_event);
 	struct inotify_device *dev;
 	char __user *start;
 	int ret;
@@ -440,81 +491,43 @@
 	dev = file->private_data;
 
 	while (1) {
+		struct inotify_kernel_event *kevent;
 
 		prepare_to_wait(&dev->wq, &wait, TASK_INTERRUPTIBLE);
 
 		mutex_lock(&dev->ev_mutex);
-		if (!list_empty(&dev->events)) {
-			ret = 0;
-			break;
-		}
+		kevent = get_one_event(dev, count);
 		mutex_unlock(&dev->ev_mutex);
 
-		if (file->f_flags & O_NONBLOCK) {
-			ret = -EAGAIN;
-			break;
+		if (kevent) {
+			ret = PTR_ERR(kevent);
+			if (IS_ERR(kevent))
+				break;
+			ret = copy_event_to_user(kevent, buf);
+			free_kevent(kevent);
+			if (ret < 0)
+				break;
+			buf += ret;
+			count -= ret;
+			continue;
 		}
 
-		if (signal_pending(current)) {
-			ret = -EINTR;
+		ret = -EAGAIN;
+		if (file->f_flags & O_NONBLOCK)
 			break;
-		}
+		ret = -EINTR;
+		if (signal_pending(current))
+			break;
+
+		if (start != buf)
+			break;
 
 		schedule();
 	}
 
 	finish_wait(&dev->wq, &wait);
-	if (ret)
-		return ret;
-
-	while (1) {
-		struct inotify_kernel_event *kevent;
-
+	if (start != buf && ret != -EFAULT)
 		ret = buf - start;
-		if (list_empty(&dev->events))
-			break;
-
-		kevent = inotify_dev_get_event(dev);
-		if (event_size + kevent->event.len > count) {
-			if (ret == 0 && count > 0) {
-				/*
-				 * could not get a single event because we
-				 * didn't have enough buffer space.
-				 */
-				ret = -EINVAL;
-			}
-			break;
-		}
-		remove_kevent(dev, kevent);
-
-		/*
-		 * Must perform the copy_to_user outside the mutex in order
-		 * to avoid a lock order reversal with mmap_sem.
-		 */
-		mutex_unlock(&dev->ev_mutex);
-
-		if (copy_to_user(buf, &kevent->event, event_size)) {
-			ret = -EFAULT;
-			break;
-		}
-		buf += event_size;
-		count -= event_size;
-
-		if (kevent->name) {
-			if (copy_to_user(buf, kevent->name, kevent->event.len)){
-				ret = -EFAULT;
-				break;
-			}
-			buf += kevent->event.len;
-			count -= kevent->event.len;
-		}
-
-		free_kevent(kevent);
-
-		mutex_lock(&dev->ev_mutex);
-	}
-	mutex_unlock(&dev->ev_mutex);
-
 	return ret;
 }
 
@@ -576,7 +589,7 @@
 	.destroy_watch	= free_inotify_user_watch,
 };
 
-asmlinkage long sys_inotify_init1(int flags)
+SYSCALL_DEFINE1(inotify_init1, int, flags)
 {
 	struct inotify_device *dev;
 	struct inotify_handle *ih;
@@ -655,12 +668,13 @@
 	return ret;
 }
 
-asmlinkage long sys_inotify_init(void)
+SYSCALL_DEFINE0(inotify_init)
 {
 	return sys_inotify_init1(0);
 }
 
-asmlinkage long sys_inotify_add_watch(int fd, const char __user *pathname, u32 mask)
+SYSCALL_DEFINE3(inotify_add_watch, int, fd, const char __user *, pathname,
+		u32, mask)
 {
 	struct inode *inode;
 	struct inotify_device *dev;
@@ -704,7 +718,7 @@
 	return ret;
 }
 
-asmlinkage long sys_inotify_rm_watch(int fd, __s32 wd)
+SYSCALL_DEFINE2(inotify_rm_watch, int, fd, __s32, wd)
 {
 	struct file *filp;
 	struct inotify_device *dev;
diff --git a/fs/ntfs/Kconfig b/fs/ntfs/Kconfig
new file mode 100644
index 0000000..f5a868c
--- /dev/null
+++ b/fs/ntfs/Kconfig
@@ -0,0 +1,78 @@
+config NTFS_FS
+	tristate "NTFS file system support"
+	select NLS
+	help
+	  NTFS is the file system of Microsoft Windows NT, 2000, XP and 2003.
+
+	  Saying Y or M here enables read support.  There is partial, but
+	  safe, write support available.  For write support you must also
+	  say Y to "NTFS write support" below.
+
+	  There are also a number of user-space tools available, called
+	  ntfsprogs.  These include ntfsundelete and ntfsresize, that work
+	  without NTFS support enabled in the kernel.
+
+	  This is a rewrite from scratch of Linux NTFS support and replaced
+	  the old NTFS code starting with Linux 2.5.11.  A backport to
+	  the Linux 2.4 kernel series is separately available as a patch
+	  from the project web site.
+
+	  For more information see <file:Documentation/filesystems/ntfs.txt>
+	  and <http://www.linux-ntfs.org/>.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called ntfs.
+
+	  If you are not using Windows NT, 2000, XP or 2003 in addition to
+	  Linux on your computer it is safe to say N.
+
+config NTFS_DEBUG
+	bool "NTFS debugging support"
+	depends on NTFS_FS
+	help
+	  If you are experiencing any problems with the NTFS file system, say
+	  Y here.  This will result in additional consistency checks to be
+	  performed by the driver as well as additional debugging messages to
+	  be written to the system log.  Note that debugging messages are
+	  disabled by default.  To enable them, supply the option debug_msgs=1
+	  at the kernel command line when booting the kernel or as an option
+	  to insmod when loading the ntfs module.  Once the driver is active,
+	  you can enable debugging messages by doing (as root):
+	  echo 1 > /proc/sys/fs/ntfs-debug
+	  Replacing the "1" with "0" would disable debug messages.
+
+	  If you leave debugging messages disabled, this results in little
+	  overhead, but enabling debug messages results in very significant
+	  slowdown of the system.
+
+	  When reporting bugs, please try to have available a full dump of
+	  debugging messages while the misbehaviour was occurring.
+
+config NTFS_RW
+	bool "NTFS write support"
+	depends on NTFS_FS
+	help
+	  This enables the partial, but safe, write support in the NTFS driver.
+
+	  The only supported operation is overwriting existing files, without
+	  changing the file length.  No file or directory creation, deletion or
+	  renaming is possible.  Note only non-resident files can be written to
+	  so you may find that some very small files (<500 bytes or so) cannot
+	  be written to.
+
+	  While we cannot guarantee that it will not damage any data, we have
+	  so far not received a single report where the driver would have
+	  damaged someones data so we assume it is perfectly safe to use.
+
+	  Note:  While write support is safe in this version (a rewrite from
+	  scratch of the NTFS support), it should be noted that the old NTFS
+	  write support, included in Linux 2.5.10 and before (since 1997),
+	  is not safe.
+
+	  This is currently useful with TopologiLinux.  TopologiLinux is run
+	  on top of any DOS/Microsoft Windows system without partitioning your
+	  hard disk.  Unlike other Linux distributions TopologiLinux does not
+	  need its own partition.  For more information see
+	  <http://topologi-linux.sourceforge.net/>
+
+	  It is perfectly safe to say N here.
diff --git a/fs/ocfs2/Kconfig b/fs/ocfs2/Kconfig
new file mode 100644
index 0000000..701b7a3
--- /dev/null
+++ b/fs/ocfs2/Kconfig
@@ -0,0 +1,85 @@
+config OCFS2_FS
+	tristate "OCFS2 file system support"
+	depends on NET && SYSFS
+	select CONFIGFS_FS
+	select JBD2
+	select CRC32
+	select QUOTA
+	select QUOTA_TREE
+	help
+	  OCFS2 is a general purpose extent based shared disk cluster file
+	  system with many similarities to ext3. It supports 64 bit inode
+	  numbers, and has automatically extending metadata groups which may
+	  also make it attractive for non-clustered use.
+
+	  You'll want to install the ocfs2-tools package in order to at least
+	  get "mount.ocfs2".
+
+	  Project web page:    http://oss.oracle.com/projects/ocfs2
+	  Tools web page:      http://oss.oracle.com/projects/ocfs2-tools
+	  OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
+
+	  For more information on OCFS2, see the file
+	  <file:Documentation/filesystems/ocfs2.txt>.
+
+config OCFS2_FS_O2CB
+	tristate "O2CB Kernelspace Clustering"
+	depends on OCFS2_FS
+	default y
+	help
+	  OCFS2 includes a simple kernelspace clustering package, the OCFS2
+	  Cluster Base.  It only requires a very small userspace component
+	  to configure it. This comes with the standard ocfs2-tools package.
+	  O2CB is limited to maintaining a cluster for OCFS2 file systems.
+	  It cannot manage any other cluster applications.
+
+	  It is always safe to say Y here, as the clustering method is
+	  run-time selectable.
+
+config OCFS2_FS_USERSPACE_CLUSTER
+	tristate "OCFS2 Userspace Clustering"
+	depends on OCFS2_FS && DLM
+	default y
+	help
+	  This option will allow OCFS2 to use userspace clustering services
+	  in conjunction with the DLM in fs/dlm.  If you are using a
+	  userspace cluster manager, say Y here.
+
+	  It is safe to say Y, as the clustering method is run-time
+	  selectable.
+
+config OCFS2_FS_STATS
+	bool "OCFS2 statistics"
+	depends on OCFS2_FS
+	default y
+	help
+	  This option allows some fs statistics to be captured. Enabling
+	  this option may increase the memory consumption.
+
+config OCFS2_DEBUG_MASKLOG
+	bool "OCFS2 logging support"
+	depends on OCFS2_FS
+	default y
+	help
+	  The ocfs2 filesystem has an extensive logging system.  The system
+	  allows selection of events to log via files in /sys/o2cb/logmask/.
+	  This option will enlarge your kernel, but it allows debugging of
+	  ocfs2 filesystem issues.
+
+config OCFS2_DEBUG_FS
+	bool "OCFS2 expensive checks"
+	depends on OCFS2_FS
+	default n
+	help
+	  This option will enable expensive consistency checks. Enable
+	  this option for debugging only as it is likely to decrease
+	  performance of the filesystem.
+
+config OCFS2_FS_POSIX_ACL
+	bool "OCFS2 POSIX Access Control Lists"
+	depends on OCFS2_FS
+	select FS_POSIX_ACL
+	default n
+	help
+	  Posix Access Control Lists (ACLs) support permissions for users and
+	  groups beyond the owner/group/world scheme.
diff --git a/fs/ocfs2/quota_global.c b/fs/ocfs2/quota_global.c
index 6aff8f2..f4efa89 100644
--- a/fs/ocfs2/quota_global.c
+++ b/fs/ocfs2/quota_global.c
@@ -810,171 +810,6 @@
 	return status;
 }
 
-/* This is difficult. We have to lock quota inode and start transaction
- * in this function but we don't want to take the penalty of exlusive
- * quota file lock when we are just going to use cached structures. So
- * we just take read lock check whether we have dquot cached and if so,
- * we don't have to take the write lock... */
-static int ocfs2_dquot_initialize(struct inode *inode, int type)
-{
-	handle_t *handle = NULL;
-	int status = 0;
-	struct super_block *sb = inode->i_sb;
-	struct ocfs2_mem_dqinfo *oinfo;
-	int exclusive = 0;
-	int cnt;
-	qid_t id;
-
-	mlog_entry_void();
-
-	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		if (type != -1 && cnt != type)
-			continue;
-		if (!sb_has_quota_active(sb, cnt))
-			continue;
-		oinfo = sb_dqinfo(sb, cnt)->dqi_priv;
-		status = ocfs2_lock_global_qf(oinfo, 0);
-		if (status < 0)
-			goto out;
-		/* This is just a performance optimization not a reliable test.
-		 * Since we hold an inode lock, noone can actually release
-		 * the structure until we are finished with initialization. */
-		if (inode->i_dquot[cnt] != NODQUOT) {
-			ocfs2_unlock_global_qf(oinfo, 0);
-			continue;
-		}
-		/* When we have inode lock, we know that no dquot_release() can
-		 * run and thus we can safely check whether we need to
-		 * read+modify global file to get quota information or whether
-		 * our node already has it. */
-		if (cnt == USRQUOTA)
-			id = inode->i_uid;
-		else if (cnt == GRPQUOTA)
-			id = inode->i_gid;
-		else
-			BUG();
-		/* Obtain exclusion from quota off... */
-		down_write(&sb_dqopt(sb)->dqptr_sem);
-		exclusive = !dquot_is_cached(sb, id, cnt);
-		up_write(&sb_dqopt(sb)->dqptr_sem);
-		if (exclusive) {
-			status = ocfs2_lock_global_qf(oinfo, 1);
-			if (status < 0) {
-				exclusive = 0;
-				mlog_errno(status);
-				goto out_ilock;
-			}
-			handle = ocfs2_start_trans(OCFS2_SB(sb),
-					ocfs2_calc_qinit_credits(sb, cnt));
-			if (IS_ERR(handle)) {
-				status = PTR_ERR(handle);
-				mlog_errno(status);
-				goto out_ilock;
-			}
-		}
-		dquot_initialize(inode, cnt);
-		if (exclusive) {
-			ocfs2_commit_trans(OCFS2_SB(sb), handle);
-			ocfs2_unlock_global_qf(oinfo, 1);
-		}
-		ocfs2_unlock_global_qf(oinfo, 0);
-	}
-	mlog_exit(0);
-	return 0;
-out_ilock:
-	if (exclusive)
-		ocfs2_unlock_global_qf(oinfo, 1);
-	ocfs2_unlock_global_qf(oinfo, 0);
-out:
-	mlog_exit(status);
-	return status;
-}
-
-static int ocfs2_dquot_drop_slow(struct inode *inode)
-{
-	int status = 0;
-	int cnt;
-	int got_lock[MAXQUOTAS] = {0, 0};
-	handle_t *handle;
-	struct super_block *sb = inode->i_sb;
-	struct ocfs2_mem_dqinfo *oinfo;
-
-	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		if (!sb_has_quota_active(sb, cnt))
-			continue;
-		oinfo = sb_dqinfo(sb, cnt)->dqi_priv;
-		status = ocfs2_lock_global_qf(oinfo, 1);
-		if (status < 0)
-			goto out;
-		got_lock[cnt] = 1;
-	}
-	handle = ocfs2_start_trans(OCFS2_SB(sb),
-			ocfs2_calc_qinit_credits(sb, USRQUOTA) +
-			ocfs2_calc_qinit_credits(sb, GRPQUOTA));
-	if (IS_ERR(handle)) {
-		status = PTR_ERR(handle);
-		mlog_errno(status);
-		goto out;
-	}
-	dquot_drop(inode);
-	ocfs2_commit_trans(OCFS2_SB(sb), handle);
-out:
-	for (cnt = 0; cnt < MAXQUOTAS; cnt++)
-		if (got_lock[cnt]) {
-			oinfo = sb_dqinfo(sb, cnt)->dqi_priv;
-			ocfs2_unlock_global_qf(oinfo, 1);
-		}
-	return status;
-}
-
-/* See the comment before ocfs2_dquot_initialize. */
-static int ocfs2_dquot_drop(struct inode *inode)
-{
-	int status = 0;
-	struct super_block *sb = inode->i_sb;
-	struct ocfs2_mem_dqinfo *oinfo;
-	int exclusive = 0;
-	int cnt;
-	int got_lock[MAXQUOTAS] = {0, 0};
-
-	mlog_entry_void();
-	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		if (!sb_has_quota_active(sb, cnt))
-			continue;
-		oinfo = sb_dqinfo(sb, cnt)->dqi_priv;
-		status = ocfs2_lock_global_qf(oinfo, 0);
-		if (status < 0)
-			goto out;
-		got_lock[cnt] = 1;
-	}
-	/* Lock against anyone releasing references so that when when we check
-	 * we know we are not going to be last ones to release dquot */
-	down_write(&sb_dqopt(sb)->dqptr_sem);
-	/* Urgh, this is a terrible hack :( */
-	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		if (inode->i_dquot[cnt] != NODQUOT &&
-		    atomic_read(&inode->i_dquot[cnt]->dq_count) > 1) {
-			exclusive = 1;
-			break;
-		}
-	}
-	if (!exclusive)
-		dquot_drop_locked(inode);
-	up_write(&sb_dqopt(sb)->dqptr_sem);
-out:
-	for (cnt = 0; cnt < MAXQUOTAS; cnt++)
-		if (got_lock[cnt]) {
-			oinfo = sb_dqinfo(sb, cnt)->dqi_priv;
-			ocfs2_unlock_global_qf(oinfo, 0);
-		}
-	/* In case we bailed out because we had to do expensive locking
-	 * do it now... */
-	if (exclusive)
-		status = ocfs2_dquot_drop_slow(inode);
-	mlog_exit(status);
-	return status;
-}
-
 static struct dquot *ocfs2_alloc_dquot(struct super_block *sb, int type)
 {
 	struct ocfs2_dquot *dquot =
@@ -991,8 +826,8 @@
 }
 
 struct dquot_operations ocfs2_quota_operations = {
-	.initialize	= ocfs2_dquot_initialize,
-	.drop		= ocfs2_dquot_drop,
+	.initialize	= dquot_initialize,
+	.drop		= dquot_drop,
 	.alloc_space	= dquot_alloc_space,
 	.alloc_inode	= dquot_alloc_inode,
 	.free_space	= dquot_free_space,
diff --git a/fs/omfs/Kconfig b/fs/omfs/Kconfig
new file mode 100644
index 0000000..b1b9a0a
--- /dev/null
+++ b/fs/omfs/Kconfig
@@ -0,0 +1,13 @@
+config OMFS_FS
+	tristate "SonicBlue Optimized MPEG File System support"
+	depends on BLOCK
+	select CRC_ITU_T
+	help
+	  This is the proprietary file system used by the Rio Karma music
+	  player and ReplayTV DVR.  Despite the name, this filesystem is not
+	  more efficient than a standard FS for MPEG files, in fact likely
+	  the opposite is true.  Say Y if you have either of these devices
+	  and wish to mount its disk.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called omfs.  If unsure, say N.
diff --git a/fs/open.c b/fs/open.c
index d882fd2..a3a78ce 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -122,7 +122,7 @@
 	return 0;
 }
 
-asmlinkage long sys_statfs(const char __user *pathname, struct statfs __user * buf)
+SYSCALL_DEFINE2(statfs, const char __user *, pathname, struct statfs __user *, buf)
 {
 	struct path path;
 	int error;
@@ -138,8 +138,7 @@
 	return error;
 }
 
-
-asmlinkage long sys_statfs64(const char __user *pathname, size_t sz, struct statfs64 __user *buf)
+SYSCALL_DEFINE3(statfs64, const char __user *, pathname, size_t, sz, struct statfs64 __user *, buf)
 {
 	struct path path;
 	long error;
@@ -157,8 +156,7 @@
 	return error;
 }
 
-
-asmlinkage long sys_fstatfs(unsigned int fd, struct statfs __user * buf)
+SYSCALL_DEFINE2(fstatfs, unsigned int, fd, struct statfs __user *, buf)
 {
 	struct file * file;
 	struct statfs tmp;
@@ -176,7 +174,7 @@
 	return error;
 }
 
-asmlinkage long sys_fstatfs64(unsigned int fd, size_t sz, struct statfs64 __user *buf)
+SYSCALL_DEFINE3(fstatfs64, unsigned int, fd, size_t, sz, struct statfs64 __user *, buf)
 {
 	struct file * file;
 	struct statfs64 tmp;
@@ -289,7 +287,7 @@
 	return error;
 }
 
-asmlinkage long sys_truncate(const char __user * path, unsigned long length)
+SYSCALL_DEFINE2(truncate, const char __user *, path, unsigned long, length)
 {
 	/* on 32-bit boxen it will cut the range 2^31--2^32-1 off */
 	return do_sys_truncate(path, (long)length);
@@ -341,7 +339,7 @@
 	return error;
 }
 
-asmlinkage long sys_ftruncate(unsigned int fd, unsigned long length)
+SYSCALL_DEFINE2(ftruncate, unsigned int, fd, unsigned long, length)
 {
 	long ret = do_sys_ftruncate(fd, length, 1);
 	/* avoid REGPARM breakage on x86: */
@@ -351,21 +349,35 @@
 
 /* LFS versions of truncate are only needed on 32 bit machines */
 #if BITS_PER_LONG == 32
-asmlinkage long sys_truncate64(const char __user * path, loff_t length)
+SYSCALL_DEFINE(truncate64)(const char __user * path, loff_t length)
 {
 	return do_sys_truncate(path, length);
 }
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_truncate64(long path, loff_t length)
+{
+	return SYSC_truncate64((const char __user *) path, length);
+}
+SYSCALL_ALIAS(sys_truncate64, SyS_truncate64);
+#endif
 
-asmlinkage long sys_ftruncate64(unsigned int fd, loff_t length)
+SYSCALL_DEFINE(ftruncate64)(unsigned int fd, loff_t length)
 {
 	long ret = do_sys_ftruncate(fd, length, 0);
 	/* avoid REGPARM breakage on x86: */
 	asmlinkage_protect(2, ret, fd, length);
 	return ret;
 }
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_ftruncate64(long fd, loff_t length)
+{
+	return SYSC_ftruncate64((unsigned int) fd, length);
+}
+SYSCALL_ALIAS(sys_ftruncate64, SyS_ftruncate64);
 #endif
+#endif /* BITS_PER_LONG == 32 */
 
-asmlinkage long sys_fallocate(int fd, int mode, loff_t offset, loff_t len)
+SYSCALL_DEFINE(fallocate)(int fd, int mode, loff_t offset, loff_t len)
 {
 	struct file *file;
 	struct inode *inode;
@@ -422,13 +434,20 @@
 out:
 	return ret;
 }
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_fallocate(long fd, long mode, loff_t offset, loff_t len)
+{
+	return SYSC_fallocate((int)fd, (int)mode, offset, len);
+}
+SYSCALL_ALIAS(sys_fallocate, SyS_fallocate);
+#endif
 
 /*
  * access() needs to use the real uid/gid, not the effective uid/gid.
  * We do this by temporarily clearing all FS-related capabilities and
  * switching the fsuid/fsgid around to the real ones.
  */
-asmlinkage long sys_faccessat(int dfd, const char __user *filename, int mode)
+SYSCALL_DEFINE3(faccessat, int, dfd, const char __user *, filename, int, mode)
 {
 	const struct cred *old_cred;
 	struct cred *override_cred;
@@ -498,12 +517,12 @@
 	return res;
 }
 
-asmlinkage long sys_access(const char __user *filename, int mode)
+SYSCALL_DEFINE2(access, const char __user *, filename, int, mode)
 {
 	return sys_faccessat(AT_FDCWD, filename, mode);
 }
 
-asmlinkage long sys_chdir(const char __user * filename)
+SYSCALL_DEFINE1(chdir, const char __user *, filename)
 {
 	struct path path;
 	int error;
@@ -524,7 +543,7 @@
 	return error;
 }
 
-asmlinkage long sys_fchdir(unsigned int fd)
+SYSCALL_DEFINE1(fchdir, unsigned int, fd)
 {
 	struct file *file;
 	struct inode *inode;
@@ -550,7 +569,7 @@
 	return error;
 }
 
-asmlinkage long sys_chroot(const char __user * filename)
+SYSCALL_DEFINE1(chroot, const char __user *, filename)
 {
 	struct path path;
 	int error;
@@ -575,7 +594,7 @@
 	return error;
 }
 
-asmlinkage long sys_fchmod(unsigned int fd, mode_t mode)
+SYSCALL_DEFINE2(fchmod, unsigned int, fd, mode_t, mode)
 {
 	struct inode * inode;
 	struct dentry * dentry;
@@ -609,8 +628,7 @@
 	return err;
 }
 
-asmlinkage long sys_fchmodat(int dfd, const char __user *filename,
-			     mode_t mode)
+SYSCALL_DEFINE3(fchmodat, int, dfd, const char __user *, filename, mode_t, mode)
 {
 	struct path path;
 	struct inode *inode;
@@ -639,7 +657,7 @@
 	return error;
 }
 
-asmlinkage long sys_chmod(const char __user *filename, mode_t mode)
+SYSCALL_DEFINE2(chmod, const char __user *, filename, mode_t, mode)
 {
 	return sys_fchmodat(AT_FDCWD, filename, mode);
 }
@@ -669,7 +687,7 @@
 	return error;
 }
 
-asmlinkage long sys_chown(const char __user * filename, uid_t user, gid_t group)
+SYSCALL_DEFINE3(chown, const char __user *, filename, uid_t, user, gid_t, group)
 {
 	struct path path;
 	int error;
@@ -688,8 +706,8 @@
 	return error;
 }
 
-asmlinkage long sys_fchownat(int dfd, const char __user *filename, uid_t user,
-			     gid_t group, int flag)
+SYSCALL_DEFINE5(fchownat, int, dfd, const char __user *, filename, uid_t, user,
+		gid_t, group, int, flag)
 {
 	struct path path;
 	int error = -EINVAL;
@@ -713,7 +731,7 @@
 	return error;
 }
 
-asmlinkage long sys_lchown(const char __user * filename, uid_t user, gid_t group)
+SYSCALL_DEFINE3(lchown, const char __user *, filename, uid_t, user, gid_t, group)
 {
 	struct path path;
 	int error;
@@ -732,8 +750,7 @@
 	return error;
 }
 
-
-asmlinkage long sys_fchown(unsigned int fd, uid_t user, gid_t group)
+SYSCALL_DEFINE3(fchown, unsigned int, fd, uid_t, user, gid_t, group)
 {
 	struct file * file;
 	int error = -EBADF;
@@ -1029,7 +1046,7 @@
 	return fd;
 }
 
-asmlinkage long sys_open(const char __user *filename, int flags, int mode)
+SYSCALL_DEFINE3(open, const char __user *, filename, int, flags, int, mode)
 {
 	long ret;
 
@@ -1042,8 +1059,8 @@
 	return ret;
 }
 
-asmlinkage long sys_openat(int dfd, const char __user *filename, int flags,
-			   int mode)
+SYSCALL_DEFINE4(openat, int, dfd, const char __user *, filename, int, flags,
+		int, mode)
 {
 	long ret;
 
@@ -1062,7 +1079,7 @@
  * For backward compatibility?  Maybe this should be moved
  * into arch/i386 instead?
  */
-asmlinkage long sys_creat(const char __user * pathname, int mode)
+SYSCALL_DEFINE2(creat, const char __user *, pathname, int, mode)
 {
 	return sys_open(pathname, O_CREAT | O_WRONLY | O_TRUNC, mode);
 }
@@ -1098,7 +1115,7 @@
  * releasing the fd. This ensures that one clone task can't release
  * an fd while another clone is opening it.
  */
-asmlinkage long sys_close(unsigned int fd)
+SYSCALL_DEFINE1(close, unsigned int, fd)
 {
 	struct file * filp;
 	struct files_struct *files = current->files;
@@ -1131,14 +1148,13 @@
 	spin_unlock(&files->file_lock);
 	return -EBADF;
 }
-
 EXPORT_SYMBOL(sys_close);
 
 /*
  * This routine simulates a hangup on the tty, to arrange that users
  * are given clean terminals at login time.
  */
-asmlinkage long sys_vhangup(void)
+SYSCALL_DEFINE0(vhangup)
 {
 	if (capable(CAP_SYS_TTY_CONFIG)) {
 		tty_vhangup_self();
diff --git a/fs/pipe.c b/fs/pipe.c
index 8916971..3a48ba5 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -1043,7 +1043,7 @@
  * sys_pipe() is the normal C calling standard for creating
  * a pipe. It's not the way Unix traditionally does this, though.
  */
-asmlinkage long __weak sys_pipe2(int __user *fildes, int flags)
+SYSCALL_DEFINE2(pipe2, int __user *, fildes, int, flags)
 {
 	int fd[2];
 	int error;
@@ -1059,7 +1059,7 @@
 	return error;
 }
 
-asmlinkage long __weak sys_pipe(int __user *fildes)
+SYSCALL_DEFINE1(pipe, int __user *, fildes)
 {
 	return sys_pipe2(fildes, 0);
 }
diff --git a/fs/qnx4/Kconfig b/fs/qnx4/Kconfig
new file mode 100644
index 0000000..be8e0e1
--- /dev/null
+++ b/fs/qnx4/Kconfig
@@ -0,0 +1,25 @@
+config QNX4FS_FS
+	tristate "QNX4 file system support (read only)"
+	depends on BLOCK
+	help
+	  This is the file system used by the real-time operating systems
+	  QNX 4 and QNX 6 (the latter is also called QNX RTP).
+	  Further information is available at <http://www.qnx.com/>.
+	  Say Y if you intend to mount QNX hard disks or floppies.
+	  Unless you say Y to "QNX4FS read-write support" below, you will
+	  only be able to read these file systems.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called qnx4.
+
+	  If you don't know whether you need it, then you don't need it:
+	  answer N.
+
+config QNX4FS_RW
+	bool "QNX4FS write support (DANGEROUS)"
+	depends on QNX4FS_FS && EXPERIMENTAL && BROKEN
+	help
+	  Say Y if you want to test write support for QNX4 file systems.
+
+	  It's currently broken, so for now:
+	  answer N.
diff --git a/fs/quota.c b/fs/quota.c
index 4a8c94f..d76ada9 100644
--- a/fs/quota.c
+++ b/fs/quota.c
@@ -371,7 +371,8 @@
  * calls. Maybe we need to add the process quotas etc. in the future,
  * but we probably should use rlimits for that.
  */
-asmlinkage long sys_quotactl(unsigned int cmd, const char __user *special, qid_t id, void __user *addr)
+SYSCALL_DEFINE4(quotactl, unsigned int, cmd, const char __user *, special,
+		qid_t, id, void __user *, addr)
 {
 	uint cmds, type;
 	struct super_block *sb = NULL;
diff --git a/fs/read_write.c b/fs/read_write.c
index 5cc6924..400fe81 100644
--- a/fs/read_write.c
+++ b/fs/read_write.c
@@ -147,7 +147,7 @@
 }
 EXPORT_SYMBOL(vfs_llseek);
 
-asmlinkage off_t sys_lseek(unsigned int fd, off_t offset, unsigned int origin)
+SYSCALL_DEFINE3(lseek, unsigned int, fd, off_t, offset, unsigned int, origin)
 {
 	off_t retval;
 	struct file * file;
@@ -171,9 +171,9 @@
 }
 
 #ifdef __ARCH_WANT_SYS_LLSEEK
-asmlinkage long sys_llseek(unsigned int fd, unsigned long offset_high,
-			   unsigned long offset_low, loff_t __user * result,
-			   unsigned int origin)
+SYSCALL_DEFINE5(llseek, unsigned int, fd, unsigned long, offset_high,
+		unsigned long, offset_low, loff_t __user *, result,
+		unsigned int, origin)
 {
 	int retval;
 	struct file * file;
@@ -369,7 +369,7 @@
 	file->f_pos = pos;
 }
 
-asmlinkage ssize_t sys_read(unsigned int fd, char __user * buf, size_t count)
+SYSCALL_DEFINE3(read, unsigned int, fd, char __user *, buf, size_t, count)
 {
 	struct file *file;
 	ssize_t ret = -EBADF;
@@ -386,7 +386,8 @@
 	return ret;
 }
 
-asmlinkage ssize_t sys_write(unsigned int fd, const char __user * buf, size_t count)
+SYSCALL_DEFINE3(write, unsigned int, fd, const char __user *, buf,
+		size_t, count)
 {
 	struct file *file;
 	ssize_t ret = -EBADF;
@@ -403,8 +404,8 @@
 	return ret;
 }
 
-asmlinkage ssize_t sys_pread64(unsigned int fd, char __user *buf,
-			     size_t count, loff_t pos)
+SYSCALL_DEFINE(pread64)(unsigned int fd, char __user *buf,
+			size_t count, loff_t pos)
 {
 	struct file *file;
 	ssize_t ret = -EBADF;
@@ -423,9 +424,17 @@
 
 	return ret;
 }
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_pread64(long fd, long buf, long count, loff_t pos)
+{
+	return SYSC_pread64((unsigned int) fd, (char __user *) buf,
+			    (size_t) count, pos);
+}
+SYSCALL_ALIAS(sys_pread64, SyS_pread64);
+#endif
 
-asmlinkage ssize_t sys_pwrite64(unsigned int fd, const char __user *buf,
-			      size_t count, loff_t pos)
+SYSCALL_DEFINE(pwrite64)(unsigned int fd, const char __user *buf,
+			 size_t count, loff_t pos)
 {
 	struct file *file;
 	ssize_t ret = -EBADF;
@@ -444,6 +453,14 @@
 
 	return ret;
 }
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_pwrite64(long fd, long buf, long count, loff_t pos)
+{
+	return SYSC_pwrite64((unsigned int) fd, (const char __user *) buf,
+			     (size_t) count, pos);
+}
+SYSCALL_ALIAS(sys_pwrite64, SyS_pwrite64);
+#endif
 
 /*
  * Reduce an iovec's length in-place.  Return the resulting number of segments
@@ -672,8 +689,8 @@
 
 EXPORT_SYMBOL(vfs_writev);
 
-asmlinkage ssize_t
-sys_readv(unsigned long fd, const struct iovec __user *vec, unsigned long vlen)
+SYSCALL_DEFINE3(readv, unsigned long, fd, const struct iovec __user *, vec,
+		unsigned long, vlen)
 {
 	struct file *file;
 	ssize_t ret = -EBADF;
@@ -693,8 +710,8 @@
 	return ret;
 }
 
-asmlinkage ssize_t
-sys_writev(unsigned long fd, const struct iovec __user *vec, unsigned long vlen)
+SYSCALL_DEFINE3(writev, unsigned long, fd, const struct iovec __user *, vec,
+		unsigned long, vlen)
 {
 	struct file *file;
 	ssize_t ret = -EBADF;
@@ -812,7 +829,7 @@
 	return retval;
 }
 
-asmlinkage ssize_t sys_sendfile(int out_fd, int in_fd, off_t __user *offset, size_t count)
+SYSCALL_DEFINE4(sendfile, int, out_fd, int, in_fd, off_t __user *, offset, size_t, count)
 {
 	loff_t pos;
 	off_t off;
@@ -831,7 +848,7 @@
 	return do_sendfile(out_fd, in_fd, NULL, count, 0);
 }
 
-asmlinkage ssize_t sys_sendfile64(int out_fd, int in_fd, loff_t __user *offset, size_t count)
+SYSCALL_DEFINE4(sendfile64, int, out_fd, int, in_fd, loff_t __user *, offset, size_t, count)
 {
 	loff_t pos;
 	ssize_t ret;
diff --git a/fs/readdir.c b/fs/readdir.c
index b318d9b..7723401 100644
--- a/fs/readdir.c
+++ b/fs/readdir.c
@@ -102,7 +102,8 @@
 	return -EFAULT;
 }
 
-asmlinkage long old_readdir(unsigned int fd, struct old_linux_dirent __user * dirent, unsigned int count)
+SYSCALL_DEFINE3(old_readdir, unsigned int, fd,
+		struct old_linux_dirent __user *, dirent, unsigned int, count)
 {
 	int error;
 	struct file * file;
@@ -187,7 +188,8 @@
 	return -EFAULT;
 }
 
-asmlinkage long sys_getdents(unsigned int fd, struct linux_dirent __user * dirent, unsigned int count)
+SYSCALL_DEFINE3(getdents, unsigned int, fd,
+		struct linux_dirent __user *, dirent, unsigned int, count)
 {
 	struct file * file;
 	struct linux_dirent __user * lastdirent;
@@ -268,7 +270,8 @@
 	return -EFAULT;
 }
 
-asmlinkage long sys_getdents64(unsigned int fd, struct linux_dirent64 __user * dirent, unsigned int count)
+SYSCALL_DEFINE3(getdents64, unsigned int, fd,
+		struct linux_dirent64 __user *, dirent, unsigned int, count)
 {
 	struct file * file;
 	struct linux_dirent64 __user * lastdirent;
diff --git a/fs/reiserfs/Kconfig b/fs/reiserfs/Kconfig
new file mode 100644
index 0000000..949b8c6
--- /dev/null
+++ b/fs/reiserfs/Kconfig
@@ -0,0 +1,85 @@
+config REISERFS_FS
+	tristate "Reiserfs support"
+	help
+	  Stores not just filenames but the files themselves in a balanced
+	  tree.  Uses journalling.
+
+	  Balanced trees are more efficient than traditional file system
+	  architectural foundations.
+
+	  In general, ReiserFS is as fast as ext2, but is very efficient with
+	  large directories and small files.  Additional patches are needed
+	  for NFS and quotas, please see <http://www.namesys.com/> for links.
+
+	  It is more easily extended to have features currently found in
+	  database and keyword search systems than block allocation based file
+	  systems are.  The next version will be so extended, and will support
+	  plugins consistent with our motto ``It takes more than a license to
+	  make source code open.''
+
+	  Read <http://www.namesys.com/> to learn more about reiserfs.
+
+	  Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com.
+
+	  If you like it, you can pay us to add new features to it that you
+	  need, buy a support contract, or pay us to port it to another OS.
+
+config REISERFS_CHECK
+	bool "Enable reiserfs debug mode"
+	depends on REISERFS_FS
+	help
+	  If you set this to Y, then ReiserFS will perform every check it can
+	  possibly imagine of its internal consistency throughout its
+	  operation.  It will also go substantially slower.  More than once we
+	  have forgotten that this was on, and then gone despondent over the
+	  latest benchmarks.:-) Use of this option allows our team to go all
+	  out in checking for consistency when debugging without fear of its
+	  effect on end users.  If you are on the verge of sending in a bug
+	  report, say Y and you might get a useful error message.  Almost
+	  everyone should say N.
+
+config REISERFS_PROC_INFO
+	bool "Stats in /proc/fs/reiserfs"
+	depends on REISERFS_FS && PROC_FS
+	help
+	  Create under /proc/fs/reiserfs a hierarchy of files, displaying
+	  various ReiserFS statistics and internal data at the expense of
+	  making your kernel or module slightly larger (+8 KB). This also
+	  increases the amount of kernel memory required for each mount.
+	  Almost everyone but ReiserFS developers and people fine-tuning
+	  reiserfs or tracing problems should say N.
+
+config REISERFS_FS_XATTR
+	bool "ReiserFS extended attributes"
+	depends on REISERFS_FS
+	help
+	  Extended attributes are name:value pairs associated with inodes by
+	  the kernel or by users (see the attr(5) manual page, or visit
+	  <http://acl.bestbits.at/> for details).
+
+	  If unsure, say N.
+
+config REISERFS_FS_POSIX_ACL
+	bool "ReiserFS POSIX Access Control Lists"
+	depends on REISERFS_FS_XATTR
+	select FS_POSIX_ACL
+	help
+	  Posix Access Control Lists (ACLs) support permissions for users and
+	  groups beyond the owner/group/world scheme.
+
+	  To learn more about Access Control Lists, visit the Posix ACLs for
+	  Linux website <http://acl.bestbits.at/>.
+
+	  If you don't know what Access Control Lists are, say N
+
+config REISERFS_FS_SECURITY
+	bool "ReiserFS Security Labels"
+	depends on REISERFS_FS_XATTR
+	help
+	  Security labels support alternative access control models
+	  implemented by security modules like SELinux.  This option
+	  enables an extended attribute handler for file security
+	  labels in the ReiserFS filesystem.
+
+	  If you are not using a security module that requires using
+	  extended attributes for file security labels, say N.
diff --git a/fs/romfs/Kconfig b/fs/romfs/Kconfig
new file mode 100644
index 0000000..1a17020
--- /dev/null
+++ b/fs/romfs/Kconfig
@@ -0,0 +1,16 @@
+config ROMFS_FS
+	tristate "ROM file system support"
+	depends on BLOCK
+	---help---
+	  This is a very small read-only file system mainly intended for
+	  initial ram disks of installation disks, but it could be used for
+	  other read-only media as well.  Read
+	  <file:Documentation/filesystems/romfs.txt> for details.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called romfs.  Note that the file system of your
+	  root partition (the one containing the directory /) cannot be a
+	  module.
+
+	  If you don't know whether you need it, then you don't need it:
+	  answer N.
diff --git a/fs/select.c b/fs/select.c
index 08b91be..0fe0e14 100644
--- a/fs/select.c
+++ b/fs/select.c
@@ -557,8 +557,8 @@
 	return ret;
 }
 
-asmlinkage long sys_select(int n, fd_set __user *inp, fd_set __user *outp,
-			fd_set __user *exp, struct timeval __user *tvp)
+SYSCALL_DEFINE5(select, int, n, fd_set __user *, inp, fd_set __user *, outp,
+		fd_set __user *, exp, struct timeval __user *, tvp)
 {
 	struct timespec end_time, *to = NULL;
 	struct timeval tv;
@@ -582,9 +582,9 @@
 }
 
 #ifdef HAVE_SET_RESTORE_SIGMASK
-asmlinkage long sys_pselect7(int n, fd_set __user *inp, fd_set __user *outp,
-		fd_set __user *exp, struct timespec __user *tsp,
-		const sigset_t __user *sigmask, size_t sigsetsize)
+static long do_pselect(int n, fd_set __user *inp, fd_set __user *outp,
+		       fd_set __user *exp, struct timespec __user *tsp,
+		       const sigset_t __user *sigmask, size_t sigsetsize)
 {
 	sigset_t ksigmask, sigsaved;
 	struct timespec ts, end_time, *to = NULL;
@@ -610,7 +610,7 @@
 		sigprocmask(SIG_SETMASK, &ksigmask, &sigsaved);
 	}
 
-	ret = core_sys_select(n, inp, outp, exp, &end_time);
+	ret = core_sys_select(n, inp, outp, exp, to);
 	ret = poll_select_copy_remaining(&end_time, tsp, 0, ret);
 
 	if (ret == -ERESTARTNOHAND) {
@@ -636,8 +636,9 @@
  * which has a pointer to the sigset_t itself followed by a size_t containing
  * the sigset size.
  */
-asmlinkage long sys_pselect6(int n, fd_set __user *inp, fd_set __user *outp,
-	fd_set __user *exp, struct timespec __user *tsp, void __user *sig)
+SYSCALL_DEFINE6(pselect6, int, n, fd_set __user *, inp, fd_set __user *, outp,
+		fd_set __user *, exp, struct timespec __user *, tsp,
+		void __user *, sig)
 {
 	size_t sigsetsize = 0;
 	sigset_t __user *up = NULL;
@@ -650,7 +651,7 @@
 			return -EFAULT;
 	}
 
-	return sys_pselect7(n, inp, outp, exp, tsp, up, sigsetsize);
+	return do_pselect(n, inp, outp, exp, tsp, up, sigsetsize);
 }
 #endif /* HAVE_SET_RESTORE_SIGMASK */
 
@@ -854,8 +855,8 @@
 	return ret;
 }
 
-asmlinkage long sys_poll(struct pollfd __user *ufds, unsigned int nfds,
-			long timeout_msecs)
+SYSCALL_DEFINE3(poll, struct pollfd __user *, ufds, unsigned int, nfds,
+		long, timeout_msecs)
 {
 	struct timespec end_time, *to = NULL;
 	int ret;
@@ -889,9 +890,9 @@
 }
 
 #ifdef HAVE_SET_RESTORE_SIGMASK
-asmlinkage long sys_ppoll(struct pollfd __user *ufds, unsigned int nfds,
-	struct timespec __user *tsp, const sigset_t __user *sigmask,
-	size_t sigsetsize)
+SYSCALL_DEFINE5(ppoll, struct pollfd __user *, ufds, unsigned int, nfds,
+		struct timespec __user *, tsp, const sigset_t __user *, sigmask,
+		size_t, sigsetsize)
 {
 	sigset_t ksigmask, sigsaved;
 	struct timespec ts, end_time, *to = NULL;
diff --git a/fs/signalfd.c b/fs/signalfd.c
index 9c39bc7..b07565c 100644
--- a/fs/signalfd.c
+++ b/fs/signalfd.c
@@ -205,8 +205,8 @@
 	.read		= signalfd_read,
 };
 
-asmlinkage long sys_signalfd4(int ufd, sigset_t __user *user_mask,
-			      size_t sizemask, int flags)
+SYSCALL_DEFINE4(signalfd4, int, ufd, sigset_t __user *, user_mask,
+		size_t, sizemask, int, flags)
 {
 	sigset_t sigmask;
 	struct signalfd_ctx *ctx;
@@ -259,8 +259,8 @@
 	return ufd;
 }
 
-asmlinkage long sys_signalfd(int ufd, sigset_t __user *user_mask,
-			     size_t sizemask)
+SYSCALL_DEFINE3(signalfd, int, ufd, sigset_t __user *, user_mask,
+		size_t, sizemask)
 {
 	return sys_signalfd4(ufd, user_mask, sizemask, 0);
 }
diff --git a/fs/smbfs/Kconfig b/fs/smbfs/Kconfig
new file mode 100644
index 0000000..e668127
--- /dev/null
+++ b/fs/smbfs/Kconfig
@@ -0,0 +1,55 @@
+config SMB_FS
+	tristate "SMB file system support (OBSOLETE, please use CIFS)"
+	depends on INET
+	select NLS
+	help
+	  SMB (Server Message Block) is the protocol Windows for Workgroups
+	  (WfW), Windows 95/98, Windows NT and OS/2 Lan Manager use to share
+	  files and printers over local networks.  Saying Y here allows you to
+	  mount their file systems (often called "shares" in this context) and
+	  access them just like any other Unix directory.  Currently, this
+	  works only if the Windows machines use TCP/IP as the underlying
+	  transport protocol, and not NetBEUI.  For details, read
+	  <file:Documentation/filesystems/smbfs.txt> and the SMB-HOWTO,
+	  available from <http://www.tldp.org/docs.html#howto>.
+
+	  Note: if you just want your box to act as an SMB *server* and make
+	  files and printing services available to Windows clients (which need
+	  to have a TCP/IP stack), you don't need to say Y here; you can use
+	  the program SAMBA (available from <ftp://ftp.samba.org/pub/samba/>)
+	  for that.
+
+	  General information about how to connect Linux, Windows machines and
+	  Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
+
+	  To compile the SMB support as a module, choose M here:
+	  the module will be called smbfs.  Most people say N, however.
+
+config SMB_NLS_DEFAULT
+	bool "Use a default NLS"
+	depends on SMB_FS
+	help
+	  Enabling this will make smbfs use nls translations by default. You
+	  need to specify the local charset (CONFIG_NLS_DEFAULT) in the nls
+	  settings and you need to give the default nls for the SMB server as
+	  CONFIG_SMB_NLS_REMOTE.
+
+	  The nls settings can be changed at mount time, if your smbmount
+	  supports that, using the codepage and iocharset parameters.
+
+	  smbmount from samba 2.2.0 or later supports this.
+
+config SMB_NLS_REMOTE
+	string "Default Remote NLS Option"
+	depends on SMB_NLS_DEFAULT
+	default "cp437"
+	help
+	  This setting allows you to specify a default value for which
+	  codepage the server uses. If this field is left blank no
+	  translations will be done by default. The local codepage/charset
+	  default to CONFIG_NLS_DEFAULT.
+
+	  The nls settings can be changed at mount time, if your smbmount
+	  supports that, using the codepage and iocharset parameters.
+
+	  smbmount from samba 2.2.0 or later supports this.
diff --git a/fs/splice.c b/fs/splice.c
index a54b3e3..4ed0ba4 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -1435,8 +1435,8 @@
  * Currently we punt and implement it as a normal copy, see pipe_to_user().
  *
  */
-asmlinkage long sys_vmsplice(int fd, const struct iovec __user *iov,
-			     unsigned long nr_segs, unsigned int flags)
+SYSCALL_DEFINE4(vmsplice, int, fd, const struct iovec __user *, iov,
+		unsigned long, nr_segs, unsigned int, flags)
 {
 	struct file *file;
 	long error;
@@ -1461,9 +1461,9 @@
 	return error;
 }
 
-asmlinkage long sys_splice(int fd_in, loff_t __user *off_in,
-			   int fd_out, loff_t __user *off_out,
-			   size_t len, unsigned int flags)
+SYSCALL_DEFINE6(splice, int, fd_in, loff_t __user *, off_in,
+		int, fd_out, loff_t __user *, off_out,
+		size_t, len, unsigned int, flags)
 {
 	long error;
 	struct file *in, *out;
@@ -1685,7 +1685,7 @@
 	return ret;
 }
 
-asmlinkage long sys_tee(int fdin, int fdout, size_t len, unsigned int flags)
+SYSCALL_DEFINE4(tee, int, fdin, int, fdout, size_t, len, unsigned int, flags)
 {
 	struct file *in;
 	int error, fput_in;
diff --git a/fs/squashfs/Kconfig b/fs/squashfs/Kconfig
new file mode 100644
index 0000000..25a00d1
--- /dev/null
+++ b/fs/squashfs/Kconfig
@@ -0,0 +1,51 @@
+config SQUASHFS
+	tristate "SquashFS 4.0 - Squashed file system support"
+	depends on BLOCK
+	select ZLIB_INFLATE
+	help
+	  Saying Y here includes support for SquashFS 4.0 (a Compressed
+	  Read-Only File System).  Squashfs is a highly compressed read-only
+	  filesystem for Linux.  It uses zlib compression to compress both
+	  files, inodes and directories.  Inodes in the system are very small
+	  and all blocks are packed to minimise data overhead. Block sizes
+	  greater than 4K are supported up to a maximum of 1 Mbytes (default
+	  block size 128K).  SquashFS 4.0 supports 64 bit filesystems and files
+	  (larger than 4GB), full uid/gid information, hard links and
+	  timestamps.  
+
+	  Squashfs is intended for general read-only filesystem use, for
+	  archival use (i.e. in cases where a .tar.gz file may be used), and in
+	  embedded systems where low overhead is needed.  Further information
+	  and tools are available from http://squashfs.sourceforge.net.
+
+	  If you want to compile this as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want),
+	  say M here and read <file:Documentation/modules.txt>.  The module
+	  will be called squashfs.  Note that the root file system (the one
+	  containing the directory /) cannot be compiled as a module.
+
+	  If unsure, say N.
+
+config SQUASHFS_EMBEDDED
+
+	bool "Additional option for memory-constrained systems" 
+	depends on SQUASHFS
+	default n
+	help
+	  Saying Y here allows you to specify cache size.
+
+	  If unsure, say N.
+
+config SQUASHFS_FRAGMENT_CACHE_SIZE
+	int "Number of fragments cached" if SQUASHFS_EMBEDDED
+	depends on SQUASHFS
+	default "3"
+	help
+	  By default SquashFS caches the last 3 fragments read from
+	  the filesystem.  Increasing this amount may mean SquashFS
+	  has to re-read fragments less often from disk, at the expense
+	  of extra system memory.  Decreasing this amount will mean
+	  SquashFS uses less memory at the expense of extra reads from disk.
+
+	  Note there must be at least one cached fragment.  Anything
+	  much more than three will probably not make much difference.
diff --git a/fs/squashfs/squashfs_fs.h b/fs/squashfs/squashfs_fs.h
index 6840da1..283daaf 100644
--- a/fs/squashfs/squashfs_fs.h
+++ b/fs/squashfs/squashfs_fs.h
@@ -26,7 +26,6 @@
 #define SQUASHFS_CACHED_FRAGMENTS	CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE
 #define SQUASHFS_MAJOR			4
 #define SQUASHFS_MINOR			0
-#define SQUASHFS_MAGIC			0x73717368
 #define SQUASHFS_START			0
 
 /* size of metadata (inode and directory) blocks */
diff --git a/fs/squashfs/super.c b/fs/squashfs/super.c
index a0466d7..071df5b 100644
--- a/fs/squashfs/super.c
+++ b/fs/squashfs/super.c
@@ -35,6 +35,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/zlib.h>
+#include <linux/magic.h>
 
 #include "squashfs_fs.h"
 #include "squashfs_fs_sb.h"
diff --git a/fs/stat.c b/fs/stat.c
index 7e12a6f8..2db740a 100644
--- a/fs/stat.c
+++ b/fs/stat.c
@@ -152,7 +152,7 @@
 	return copy_to_user(statbuf,&tmp,sizeof(tmp)) ? -EFAULT : 0;
 }
 
-asmlinkage long sys_stat(char __user * filename, struct __old_kernel_stat __user * statbuf)
+SYSCALL_DEFINE2(stat, char __user *, filename, struct __old_kernel_stat __user *, statbuf)
 {
 	struct kstat stat;
 	int error = vfs_stat_fd(AT_FDCWD, filename, &stat);
@@ -162,7 +162,8 @@
 
 	return error;
 }
-asmlinkage long sys_lstat(char __user * filename, struct __old_kernel_stat __user * statbuf)
+
+SYSCALL_DEFINE2(lstat, char __user *, filename, struct __old_kernel_stat __user *, statbuf)
 {
 	struct kstat stat;
 	int error = vfs_lstat_fd(AT_FDCWD, filename, &stat);
@@ -172,7 +173,8 @@
 
 	return error;
 }
-asmlinkage long sys_fstat(unsigned int fd, struct __old_kernel_stat __user * statbuf)
+
+SYSCALL_DEFINE2(fstat, unsigned int, fd, struct __old_kernel_stat __user *, statbuf)
 {
 	struct kstat stat;
 	int error = vfs_fstat(fd, &stat);
@@ -235,7 +237,7 @@
 	return copy_to_user(statbuf,&tmp,sizeof(tmp)) ? -EFAULT : 0;
 }
 
-asmlinkage long sys_newstat(char __user *filename, struct stat __user *statbuf)
+SYSCALL_DEFINE2(newstat, char __user *, filename, struct stat __user *, statbuf)
 {
 	struct kstat stat;
 	int error = vfs_stat_fd(AT_FDCWD, filename, &stat);
@@ -246,7 +248,7 @@
 	return error;
 }
 
-asmlinkage long sys_newlstat(char __user *filename, struct stat __user *statbuf)
+SYSCALL_DEFINE2(newlstat, char __user *, filename, struct stat __user *, statbuf)
 {
 	struct kstat stat;
 	int error = vfs_lstat_fd(AT_FDCWD, filename, &stat);
@@ -258,8 +260,8 @@
 }
 
 #if !defined(__ARCH_WANT_STAT64) || defined(__ARCH_WANT_SYS_NEWFSTATAT)
-asmlinkage long sys_newfstatat(int dfd, char __user *filename,
-				struct stat __user *statbuf, int flag)
+SYSCALL_DEFINE4(newfstatat, int, dfd, char __user *, filename,
+		struct stat __user *, statbuf, int, flag)
 {
 	struct kstat stat;
 	int error = -EINVAL;
@@ -280,7 +282,7 @@
 }
 #endif
 
-asmlinkage long sys_newfstat(unsigned int fd, struct stat __user *statbuf)
+SYSCALL_DEFINE2(newfstat, unsigned int, fd, struct stat __user *, statbuf)
 {
 	struct kstat stat;
 	int error = vfs_fstat(fd, &stat);
@@ -291,8 +293,8 @@
 	return error;
 }
 
-asmlinkage long sys_readlinkat(int dfd, const char __user *pathname,
-				char __user *buf, int bufsiz)
+SYSCALL_DEFINE4(readlinkat, int, dfd, const char __user *, pathname,
+		char __user *, buf, int, bufsiz)
 {
 	struct path path;
 	int error;
@@ -318,8 +320,8 @@
 	return error;
 }
 
-asmlinkage long sys_readlink(const char __user *path, char __user *buf,
-				int bufsiz)
+SYSCALL_DEFINE3(readlink, const char __user *, path, char __user *, buf,
+		int, bufsiz)
 {
 	return sys_readlinkat(AT_FDCWD, path, buf, bufsiz);
 }
@@ -365,7 +367,7 @@
 	return copy_to_user(statbuf,&tmp,sizeof(tmp)) ? -EFAULT : 0;
 }
 
-asmlinkage long sys_stat64(char __user * filename, struct stat64 __user * statbuf)
+SYSCALL_DEFINE2(stat64, char __user *, filename, struct stat64 __user *, statbuf)
 {
 	struct kstat stat;
 	int error = vfs_stat(filename, &stat);
@@ -375,7 +377,8 @@
 
 	return error;
 }
-asmlinkage long sys_lstat64(char __user * filename, struct stat64 __user * statbuf)
+
+SYSCALL_DEFINE2(lstat64, char __user *, filename, struct stat64 __user *, statbuf)
 {
 	struct kstat stat;
 	int error = vfs_lstat(filename, &stat);
@@ -385,7 +388,8 @@
 
 	return error;
 }
-asmlinkage long sys_fstat64(unsigned long fd, struct stat64 __user * statbuf)
+
+SYSCALL_DEFINE2(fstat64, unsigned long, fd, struct stat64 __user *, statbuf)
 {
 	struct kstat stat;
 	int error = vfs_fstat(fd, &stat);
@@ -396,8 +400,8 @@
 	return error;
 }
 
-asmlinkage long sys_fstatat64(int dfd, char __user *filename,
-			       struct stat64 __user *statbuf, int flag)
+SYSCALL_DEFINE4(fstatat64, int, dfd, char __user *, filename,
+		struct stat64 __user *, statbuf, int, flag)
 {
 	struct kstat stat;
 	int error = -EINVAL;
diff --git a/fs/super.c b/fs/super.c
index ed080c4..645e540 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -544,7 +544,7 @@
 	return NULL;
 }
 
-asmlinkage long sys_ustat(unsigned dev, struct ustat __user * ubuf)
+SYSCALL_DEFINE2(ustat, unsigned, dev, struct ustat __user *, ubuf)
 {
         struct super_block *s;
         struct ustat tmp;
diff --git a/fs/sync.c b/fs/sync.c
index ac02b56..a16d53e 100644
--- a/fs/sync.c
+++ b/fs/sync.c
@@ -36,7 +36,7 @@
 		laptop_sync_completion();
 }
 
-asmlinkage long sys_sync(void)
+SYSCALL_DEFINE0(sync)
 {
 	do_sync(1);
 	return 0;
@@ -144,12 +144,12 @@
 	return ret;
 }
 
-asmlinkage long sys_fsync(unsigned int fd)
+SYSCALL_DEFINE1(fsync, unsigned int, fd)
 {
 	return do_fsync(fd, 0);
 }
 
-asmlinkage long sys_fdatasync(unsigned int fd)
+SYSCALL_DEFINE1(fdatasync, unsigned int, fd)
 {
 	return do_fsync(fd, 1);
 }
@@ -201,8 +201,8 @@
  * already-instantiated disk blocks, there are no guarantees here that the data
  * will be available after a crash.
  */
-asmlinkage long sys_sync_file_range(int fd, loff_t offset, loff_t nbytes,
-					unsigned int flags)
+SYSCALL_DEFINE(sync_file_range)(int fd, loff_t offset, loff_t nbytes,
+				unsigned int flags)
 {
 	int ret;
 	struct file *file;
@@ -262,14 +262,32 @@
 out:
 	return ret;
 }
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_sync_file_range(long fd, loff_t offset, loff_t nbytes,
+				    long flags)
+{
+	return SYSC_sync_file_range((int) fd, offset, nbytes,
+				    (unsigned int) flags);
+}
+SYSCALL_ALIAS(sys_sync_file_range, SyS_sync_file_range);
+#endif
 
 /* It would be nice if people remember that not all the world's an i386
    when they introduce new system calls */
-asmlinkage long sys_sync_file_range2(int fd, unsigned int flags,
-				     loff_t offset, loff_t nbytes)
+SYSCALL_DEFINE(sync_file_range2)(int fd, unsigned int flags,
+				 loff_t offset, loff_t nbytes)
 {
 	return sys_sync_file_range(fd, offset, nbytes, flags);
 }
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_sync_file_range2(long fd, long flags,
+				     loff_t offset, loff_t nbytes)
+{
+	return SYSC_sync_file_range2((int) fd, (unsigned int) flags,
+				     offset, nbytes);
+}
+SYSCALL_ALIAS(sys_sync_file_range2, SyS_sync_file_range2);
+#endif
 
 /*
  * `endbyte' is inclusive
diff --git a/fs/sysfs/Kconfig b/fs/sysfs/Kconfig
new file mode 100644
index 0000000..f4b6758
--- /dev/null
+++ b/fs/sysfs/Kconfig
@@ -0,0 +1,23 @@
+config SYSFS
+	bool "sysfs file system support" if EMBEDDED
+	default y
+	help
+	The sysfs filesystem is a virtual filesystem that the kernel uses to
+	export internal kernel objects, their attributes, and their
+	relationships to one another.
+
+	Users can use sysfs to ascertain useful information about the running
+	kernel, such as the devices the kernel has discovered on each bus and
+	which driver each is bound to. sysfs can also be used to tune devices
+	and other kernel subsystems.
+
+	Some system agents rely on the information in sysfs to operate.
+	/sbin/hotplug uses device and object attributes in sysfs to assist in
+	delegating policy decisions, like persistently naming devices.
+
+	sysfs is currently used by the block subsystem to mount the root
+	partition.  If sysfs is disabled you must specify the boot device on
+	the kernel boot command line via its major and minor numbers.  For
+	example, "root=03:01" for /dev/hda1.
+
+	Designers of embedded systems may wish to say N here to conserve space.
diff --git a/fs/sysfs/bin.c b/fs/sysfs/bin.c
index 66f6e58..f2c478c 100644
--- a/fs/sysfs/bin.c
+++ b/fs/sysfs/bin.c
@@ -63,6 +63,9 @@
 	int count = min_t(size_t, bytes, PAGE_SIZE);
 	char *temp;
 
+	if (!bytes)
+		return 0;
+
 	if (size) {
 		if (offs > size)
 			return 0;
@@ -131,6 +134,9 @@
 	int count = min_t(size_t, bytes, PAGE_SIZE);
 	char *temp;
 
+	if (!bytes)
+		return 0;
+
 	if (size) {
 		if (offs > size)
 			return 0;
diff --git a/fs/sysv/Kconfig b/fs/sysv/Kconfig
new file mode 100644
index 0000000..33aeb4b
--- /dev/null
+++ b/fs/sysv/Kconfig
@@ -0,0 +1,36 @@
+config SYSV_FS
+	tristate "System V/Xenix/V7/Coherent file system support"
+	depends on BLOCK
+	help
+	  SCO, Xenix and Coherent are commercial Unix systems for Intel
+	  machines, and Version 7 was used on the DEC PDP-11. Saying Y
+	  here would allow you to read from their floppies and hard disk
+	  partitions.
+
+	  If you have floppies or hard disk partitions like that, it is likely
+	  that they contain binaries from those other Unix systems; in order
+	  to run these binaries, you will want to install linux-abi which is
+	  a set of kernel modules that lets you run SCO, Xenix, Wyse,
+	  UnixWare, Dell Unix and System V programs under Linux.  It is
+	  available via FTP (user: ftp) from
+	  <ftp://ftp.openlinux.org/pub/people/hch/linux-abi/>).
+	  NOTE: that will work only for binaries from Intel-based systems;
+	  PDP ones will have to wait until somebody ports Linux to -11 ;-)
+
+	  If you only intend to mount files from some other Unix over the
+	  network using NFS, you don't need the System V file system support
+	  (but you need NFS file system support obviously).
+
+	  Note that this option is generally not needed for floppies, since a
+	  good portable way to transport files and directories between unixes
+	  (and even other operating systems) is given by the tar program ("man
+	  tar" or preferably "info tar").  Note also that this option has
+	  nothing whatsoever to do with the option "System V IPC". Read about
+	  the System V file system in
+	  <file:Documentation/filesystems/sysv-fs.txt>.
+	  Saying Y here will enlarge your kernel by about 27 KB.
+
+	  To compile this as a module, choose M here: the module will be called
+	  sysv.
+
+	  If you haven't heard about all of this before, it's safe to say N.
diff --git a/fs/timerfd.c b/fs/timerfd.c
index 0862f0e..6a123b8 100644
--- a/fs/timerfd.c
+++ b/fs/timerfd.c
@@ -177,7 +177,7 @@
 	return file;
 }
 
-asmlinkage long sys_timerfd_create(int clockid, int flags)
+SYSCALL_DEFINE2(timerfd_create, int, clockid, int, flags)
 {
 	int ufd;
 	struct timerfd_ctx *ctx;
@@ -208,9 +208,9 @@
 	return ufd;
 }
 
-asmlinkage long sys_timerfd_settime(int ufd, int flags,
-				    const struct itimerspec __user *utmr,
-				    struct itimerspec __user *otmr)
+SYSCALL_DEFINE4(timerfd_settime, int, ufd, int, flags,
+		const struct itimerspec __user *, utmr,
+		struct itimerspec __user *, otmr)
 {
 	struct file *file;
 	struct timerfd_ctx *ctx;
@@ -265,7 +265,7 @@
 	return 0;
 }
 
-asmlinkage long sys_timerfd_gettime(int ufd, struct itimerspec __user *otmr)
+SYSCALL_DEFINE2(timerfd_gettime, int, ufd, struct itimerspec __user *, otmr)
 {
 	struct file *file;
 	struct timerfd_ctx *ctx;
diff --git a/fs/udf/Kconfig b/fs/udf/Kconfig
new file mode 100644
index 0000000..0e0e99b
--- /dev/null
+++ b/fs/udf/Kconfig
@@ -0,0 +1,18 @@
+config UDF_FS
+	tristate "UDF file system support"
+	select CRC_ITU_T
+	help
+	  This is the new file system used on some CD-ROMs and DVDs. Say Y if
+	  you intend to mount DVD discs or CDRW's written in packet mode, or
+	  if written to by other UDF utilities, such as DirectCD.
+	  Please read <file:Documentation/filesystems/udf.txt>.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called udf.
+
+	  If unsure, say N.
+
+config UDF_NLS
+	bool
+	default y
+	depends on (UDF_FS=m && NLS) || (UDF_FS=y && NLS=y)
diff --git a/fs/ufs/Kconfig b/fs/ufs/Kconfig
new file mode 100644
index 0000000..e4f10a4
--- /dev/null
+++ b/fs/ufs/Kconfig
@@ -0,0 +1,43 @@
+config UFS_FS
+	tristate "UFS file system support (read only)"
+	depends on BLOCK
+	help
+	  BSD and derivate versions of Unix (such as SunOS, FreeBSD, NetBSD,
+	  OpenBSD and NeXTstep) use a file system called UFS. Some System V
+	  Unixes can create and mount hard disk partitions and diskettes using
+	  this file system as well. Saying Y here will allow you to read from
+	  these partitions; if you also want to write to them, say Y to the
+	  experimental "UFS file system write support", below. Please read the
+	  file <file:Documentation/filesystems/ufs.txt> for more information.
+
+          The recently released UFS2 variant (used in FreeBSD 5.x) is
+          READ-ONLY supported.
+
+	  Note that this option is generally not needed for floppies, since a
+	  good portable way to transport files and directories between unixes
+	  (and even other operating systems) is given by the tar program ("man
+	  tar" or preferably "info tar").
+
+	  When accessing NeXTstep files, you may need to convert them from the
+	  NeXT character set to the Latin1 character set; use the program
+	  recode ("info recode") for this purpose.
+
+	  To compile the UFS file system support as a module, choose M here: the
+	  module will be called ufs.
+
+	  If you haven't heard about all of this before, it's safe to say N.
+
+config UFS_FS_WRITE
+	bool "UFS file system write support (DANGEROUS)"
+	depends on UFS_FS && EXPERIMENTAL
+	help
+	  Say Y here if you want to try writing to UFS partitions. This is
+	  experimental, so you should back up your UFS partitions beforehand.
+
+config UFS_DEBUG
+	bool "UFS debugging"
+	depends on UFS_FS
+	help
+	  If you are experiencing any problems with the UFS filesystem, say
+	  Y here.  This will result in _many_ additional debugging messages to be
+	  written to the system log.
diff --git a/fs/utimes.c b/fs/utimes.c
index 6929e3e..e4c75db 100644
--- a/fs/utimes.c
+++ b/fs/utimes.c
@@ -24,7 +24,7 @@
  * must be owner or have write permission.
  * Else, update from *times, must be owner or super user.
  */
-asmlinkage long sys_utime(char __user *filename, struct utimbuf __user *times)
+SYSCALL_DEFINE2(utime, char __user *, filename, struct utimbuf __user *, times)
 {
 	struct timespec tv[2];
 
@@ -170,7 +170,8 @@
 	return error;
 }
 
-asmlinkage long sys_utimensat(int dfd, char __user *filename, struct timespec __user *utimes, int flags)
+SYSCALL_DEFINE4(utimensat, int, dfd, char __user *, filename,
+		struct timespec __user *, utimes, int, flags)
 {
 	struct timespec tstimes[2];
 
@@ -187,7 +188,8 @@
 	return do_utimes(dfd, filename, utimes ? tstimes : NULL, flags);
 }
 
-asmlinkage long sys_futimesat(int dfd, char __user *filename, struct timeval __user *utimes)
+SYSCALL_DEFINE3(futimesat, int, dfd, char __user *, filename,
+		struct timeval __user *, utimes)
 {
 	struct timeval times[2];
 	struct timespec tstimes[2];
@@ -214,7 +216,8 @@
 	return do_utimes(dfd, filename, utimes ? tstimes : NULL, 0);
 }
 
-asmlinkage long sys_utimes(char __user *filename, struct timeval __user *utimes)
+SYSCALL_DEFINE2(utimes, char __user *, filename,
+		struct timeval __user *, utimes)
 {
 	return sys_futimesat(AT_FDCWD, filename, utimes);
 }
diff --git a/fs/xattr.c b/fs/xattr.c
index 237804c..197c4fc 100644
--- a/fs/xattr.c
+++ b/fs/xattr.c
@@ -251,9 +251,9 @@
 	return error;
 }
 
-asmlinkage long
-sys_setxattr(const char __user *pathname, const char __user *name,
-	     const void __user *value, size_t size, int flags)
+SYSCALL_DEFINE5(setxattr, const char __user *, pathname,
+		const char __user *, name, const void __user *, value,
+		size_t, size, int, flags)
 {
 	struct path path;
 	int error;
@@ -270,9 +270,9 @@
 	return error;
 }
 
-asmlinkage long
-sys_lsetxattr(const char __user *pathname, const char __user *name,
-	      const void __user *value, size_t size, int flags)
+SYSCALL_DEFINE5(lsetxattr, const char __user *, pathname,
+		const char __user *, name, const void __user *, value,
+		size_t, size, int, flags)
 {
 	struct path path;
 	int error;
@@ -289,9 +289,8 @@
 	return error;
 }
 
-asmlinkage long
-sys_fsetxattr(int fd, const char __user *name, const void __user *value,
-	      size_t size, int flags)
+SYSCALL_DEFINE5(fsetxattr, int, fd, const char __user *, name,
+		const void __user *,value, size_t, size, int, flags)
 {
 	struct file *f;
 	struct dentry *dentry;
@@ -349,9 +348,8 @@
 	return error;
 }
 
-asmlinkage ssize_t
-sys_getxattr(const char __user *pathname, const char __user *name,
-	     void __user *value, size_t size)
+SYSCALL_DEFINE4(getxattr, const char __user *, pathname,
+		const char __user *, name, void __user *, value, size_t, size)
 {
 	struct path path;
 	ssize_t error;
@@ -364,9 +362,8 @@
 	return error;
 }
 
-asmlinkage ssize_t
-sys_lgetxattr(const char __user *pathname, const char __user *name, void __user *value,
-	      size_t size)
+SYSCALL_DEFINE4(lgetxattr, const char __user *, pathname,
+		const char __user *, name, void __user *, value, size_t, size)
 {
 	struct path path;
 	ssize_t error;
@@ -379,8 +376,8 @@
 	return error;
 }
 
-asmlinkage ssize_t
-sys_fgetxattr(int fd, const char __user *name, void __user *value, size_t size)
+SYSCALL_DEFINE4(fgetxattr, int, fd, const char __user *, name,
+		void __user *, value, size_t, size)
 {
 	struct file *f;
 	ssize_t error = -EBADF;
@@ -424,8 +421,8 @@
 	return error;
 }
 
-asmlinkage ssize_t
-sys_listxattr(const char __user *pathname, char __user *list, size_t size)
+SYSCALL_DEFINE3(listxattr, const char __user *, pathname, char __user *, list,
+		size_t, size)
 {
 	struct path path;
 	ssize_t error;
@@ -438,8 +435,8 @@
 	return error;
 }
 
-asmlinkage ssize_t
-sys_llistxattr(const char __user *pathname, char __user *list, size_t size)
+SYSCALL_DEFINE3(llistxattr, const char __user *, pathname, char __user *, list,
+		size_t, size)
 {
 	struct path path;
 	ssize_t error;
@@ -452,8 +449,7 @@
 	return error;
 }
 
-asmlinkage ssize_t
-sys_flistxattr(int fd, char __user *list, size_t size)
+SYSCALL_DEFINE3(flistxattr, int, fd, char __user *, list, size_t, size)
 {
 	struct file *f;
 	ssize_t error = -EBADF;
@@ -485,8 +481,8 @@
 	return vfs_removexattr(d, kname);
 }
 
-asmlinkage long
-sys_removexattr(const char __user *pathname, const char __user *name)
+SYSCALL_DEFINE2(removexattr, const char __user *, pathname,
+		const char __user *, name)
 {
 	struct path path;
 	int error;
@@ -503,8 +499,8 @@
 	return error;
 }
 
-asmlinkage long
-sys_lremovexattr(const char __user *pathname, const char __user *name)
+SYSCALL_DEFINE2(lremovexattr, const char __user *, pathname,
+		const char __user *, name)
 {
 	struct path path;
 	int error;
@@ -521,8 +517,7 @@
 	return error;
 }
 
-asmlinkage long
-sys_fremovexattr(int fd, const char __user *name)
+SYSCALL_DEFINE2(fremovexattr, int, fd, const char __user *, name)
 {
 	struct file *f;
 	struct dentry *dentry;
diff --git a/fs/xfs/Kconfig b/fs/xfs/Kconfig
index 3f53dd1..29228f5 100644
--- a/fs/xfs/Kconfig
+++ b/fs/xfs/Kconfig
@@ -1,6 +1,7 @@
 config XFS_FS
 	tristate "XFS filesystem support"
 	depends on BLOCK
+	select EXPORTFS
 	help
 	  XFS is a high performance journaling filesystem which originated
 	  on the SGI IRIX platform.  It is completely multi-threaded, can
diff --git a/fs/xfs/linux-2.6/xfs_aops.h b/fs/xfs/linux-2.6/xfs_aops.h
index 7b26f5f..1dd5288 100644
--- a/fs/xfs/linux-2.6/xfs_aops.h
+++ b/fs/xfs/linux-2.6/xfs_aops.h
@@ -21,8 +21,6 @@
 extern struct workqueue_struct *xfsdatad_workqueue;
 extern mempool_t *xfs_ioend_pool;
 
-typedef void (*xfs_ioend_func_t)(void *);
-
 /*
  * xfs_ioend struct manages large extent writes for XFS.
  * It can manage several multi-page bio's at once.
diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c
index cb329ed..d71dc44 100644
--- a/fs/xfs/linux-2.6/xfs_buf.c
+++ b/fs/xfs/linux-2.6/xfs_buf.c
@@ -166,75 +166,6 @@
 }
 
 /*
- *	Mapping of multi-page buffers into contiguous virtual space
- */
-
-typedef struct a_list {
-	void		*vm_addr;
-	struct a_list	*next;
-} a_list_t;
-
-static a_list_t		*as_free_head;
-static int		as_list_len;
-static DEFINE_SPINLOCK(as_lock);
-
-/*
- *	Try to batch vunmaps because they are costly.
- */
-STATIC void
-free_address(
-	void		*addr)
-{
-	a_list_t	*aentry;
-
-#ifdef CONFIG_XEN
-	/*
-	 * Xen needs to be able to make sure it can get an exclusive
-	 * RO mapping of pages it wants to turn into a pagetable.  If
-	 * a newly allocated page is also still being vmap()ed by xfs,
-	 * it will cause pagetable construction to fail.  This is a
-	 * quick workaround to always eagerly unmap pages so that Xen
-	 * is happy.
-	 */
-	vunmap(addr);
-	return;
-#endif
-
-	aentry = kmalloc(sizeof(a_list_t), GFP_NOWAIT);
-	if (likely(aentry)) {
-		spin_lock(&as_lock);
-		aentry->next = as_free_head;
-		aentry->vm_addr = addr;
-		as_free_head = aentry;
-		as_list_len++;
-		spin_unlock(&as_lock);
-	} else {
-		vunmap(addr);
-	}
-}
-
-STATIC void
-purge_addresses(void)
-{
-	a_list_t	*aentry, *old;
-
-	if (as_free_head == NULL)
-		return;
-
-	spin_lock(&as_lock);
-	aentry = as_free_head;
-	as_free_head = NULL;
-	as_list_len = 0;
-	spin_unlock(&as_lock);
-
-	while ((old = aentry) != NULL) {
-		vunmap(aentry->vm_addr);
-		aentry = aentry->next;
-		kfree(old);
-	}
-}
-
-/*
  *	Internal xfs_buf_t object manipulation
  */
 
@@ -333,7 +264,7 @@
 		uint		i;
 
 		if ((bp->b_flags & XBF_MAPPED) && (bp->b_page_count > 1))
-			free_address(bp->b_addr - bp->b_offset);
+                       vm_unmap_ram(bp->b_addr - bp->b_offset, bp->b_page_count);
 
 		for (i = 0; i < bp->b_page_count; i++) {
 			struct page	*page = bp->b_pages[i];
@@ -455,10 +386,8 @@
 		bp->b_addr = page_address(bp->b_pages[0]) + bp->b_offset;
 		bp->b_flags |= XBF_MAPPED;
 	} else if (flags & XBF_MAPPED) {
-		if (as_list_len > 64)
-			purge_addresses();
-		bp->b_addr = vmap(bp->b_pages, bp->b_page_count,
-					VM_MAP, PAGE_KERNEL);
+               bp->b_addr = vm_map_ram(bp->b_pages, bp->b_page_count,
+                                       -1, PAGE_KERNEL);
 		if (unlikely(bp->b_addr == NULL))
 			return -ENOMEM;
 		bp->b_addr += bp->b_offset;
@@ -1743,8 +1672,6 @@
 			count++;
 		}
 
-		if (as_list_len > 0)
-			purge_addresses();
 		if (count)
 			blk_run_address_space(target->bt_mapping);
 
diff --git a/fs/xfs/linux-2.6/xfs_export.c b/fs/xfs/linux-2.6/xfs_export.c
index 595751f..87b8cbd 100644
--- a/fs/xfs/linux-2.6/xfs_export.c
+++ b/fs/xfs/linux-2.6/xfs_export.c
@@ -126,11 +126,26 @@
 	if (ino == 0)
 		return ERR_PTR(-ESTALE);
 
-	error = xfs_iget(mp, NULL, ino, 0, XFS_ILOCK_SHARED, &ip, 0);
-	if (error)
+	/*
+	 * The XFS_IGET_BULKSTAT means that an invalid inode number is just
+	 * fine and not an indication of a corrupted filesystem.  Because
+	 * clients can send any kind of invalid file handle, e.g. after
+	 * a restore on the server we have to deal with this case gracefully.
+	 */
+	error = xfs_iget(mp, NULL, ino, XFS_IGET_BULKSTAT,
+			 XFS_ILOCK_SHARED, &ip, 0);
+	if (error) {
+		/*
+		 * EINVAL means the inode cluster doesn't exist anymore.
+		 * This implies the filehandle is stale, so we should
+		 * translate it here.
+		 * We don't use ESTALE directly down the chain to not
+		 * confuse applications using bulkstat that expect EINVAL.
+		 */
+		if (error == EINVAL)
+			error = ESTALE;
 		return ERR_PTR(-error);
-	if (!ip)
-		return ERR_PTR(-EIO);
+	}
 
 	if (ip->i_d.di_gen != generation) {
 		xfs_iput_new(ip, XFS_ILOCK_SHARED);
diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c
index e5be1e0..4bd1123 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl.c
+++ b/fs/xfs/linux-2.6/xfs_ioctl.c
@@ -50,12 +50,14 @@
 #include "xfs_vnodeops.h"
 #include "xfs_quota.h"
 #include "xfs_inode_item.h"
+#include "xfs_export.h"
 
 #include <linux/capability.h>
 #include <linux/dcache.h>
 #include <linux/mount.h>
 #include <linux/namei.h>
 #include <linux/pagemap.h>
+#include <linux/exportfs.h>
 
 /*
  * xfs_find_handle maps from userspace xfs_fsop_handlereq structure to
@@ -164,97 +166,69 @@
 	return 0;
 }
 
-
 /*
- * Convert userspace handle data into inode.
- *
- * We use the fact that all the fsop_handlereq ioctl calls have a data
- * structure argument whose first component is always a xfs_fsop_handlereq_t,
- * so we can pass that sub structure into this handy, shared routine.
- *
- * If no error, caller must always iput the returned inode.
+ * No need to do permission checks on the various pathname components
+ * as the handle operations are privileged.
  */
 STATIC int
-xfs_vget_fsop_handlereq(
-	xfs_mount_t		*mp,
-	struct inode		*parinode,	/* parent inode pointer    */
-	xfs_fsop_handlereq_t	*hreq,
-	struct inode		**inode)
+xfs_handle_acceptable(
+	void			*context,
+	struct dentry		*dentry)
 {
-	void			__user *hanp;
-	size_t			hlen;
-	xfs_fid_t		*xfid;
-	xfs_handle_t		*handlep;
+	return 1;
+}
+
+/*
+ * Convert userspace handle data into a dentry.
+ */
+struct dentry *
+xfs_handle_to_dentry(
+	struct file		*parfilp,
+	void __user		*uhandle,
+	u32			hlen)
+{
 	xfs_handle_t		handle;
-	xfs_inode_t		*ip;
-	xfs_ino_t		ino;
-	__u32			igen;
-	int			error;
+	struct xfs_fid64	fid;
 
 	/*
 	 * Only allow handle opens under a directory.
 	 */
-	if (!S_ISDIR(parinode->i_mode))
-		return XFS_ERROR(ENOTDIR);
+	if (!S_ISDIR(parfilp->f_path.dentry->d_inode->i_mode))
+		return ERR_PTR(-ENOTDIR);
 
-	hanp = hreq->ihandle;
-	hlen = hreq->ihandlen;
-	handlep = &handle;
+	if (hlen != sizeof(xfs_handle_t))
+		return ERR_PTR(-EINVAL);
+	if (copy_from_user(&handle, uhandle, hlen))
+		return ERR_PTR(-EFAULT);
+	if (handle.ha_fid.fid_len !=
+	    sizeof(handle.ha_fid) - sizeof(handle.ha_fid.fid_len))
+		return ERR_PTR(-EINVAL);
 
-	if (hlen < sizeof(handlep->ha_fsid) || hlen > sizeof(*handlep))
-		return XFS_ERROR(EINVAL);
-	if (copy_from_user(handlep, hanp, hlen))
-		return XFS_ERROR(EFAULT);
-	if (hlen < sizeof(*handlep))
-		memset(((char *)handlep) + hlen, 0, sizeof(*handlep) - hlen);
-	if (hlen > sizeof(handlep->ha_fsid)) {
-		if (handlep->ha_fid.fid_len !=
-		    (hlen - sizeof(handlep->ha_fsid) -
-		            sizeof(handlep->ha_fid.fid_len)) ||
-		    handlep->ha_fid.fid_pad)
-			return XFS_ERROR(EINVAL);
-	}
+	memset(&fid, 0, sizeof(struct fid));
+	fid.ino = handle.ha_fid.fid_ino;
+	fid.gen = handle.ha_fid.fid_gen;
 
-	/*
-	 * Crack the handle, obtain the inode # & generation #
-	 */
-	xfid = (struct xfs_fid *)&handlep->ha_fid;
-	if (xfid->fid_len == sizeof(*xfid) - sizeof(xfid->fid_len)) {
-		ino  = xfid->fid_ino;
-		igen = xfid->fid_gen;
-	} else {
-		return XFS_ERROR(EINVAL);
-	}
+	return exportfs_decode_fh(parfilp->f_path.mnt, (struct fid *)&fid, 3,
+			FILEID_INO32_GEN | XFS_FILEID_TYPE_64FLAG,
+			xfs_handle_acceptable, NULL);
+}
 
-	/*
-	 * Get the XFS inode, building a Linux inode to go with it.
-	 */
-	error = xfs_iget(mp, NULL, ino, 0, XFS_ILOCK_SHARED, &ip, 0);
-	if (error)
-		return error;
-	if (ip == NULL)
-		return XFS_ERROR(EIO);
-	if (ip->i_d.di_gen != igen) {
-		xfs_iput_new(ip, XFS_ILOCK_SHARED);
-		return XFS_ERROR(ENOENT);
-	}
-
-	xfs_iunlock(ip, XFS_ILOCK_SHARED);
-
-	*inode = VFS_I(ip);
-	return 0;
+STATIC struct dentry *
+xfs_handlereq_to_dentry(
+	struct file		*parfilp,
+	xfs_fsop_handlereq_t	*hreq)
+{
+	return xfs_handle_to_dentry(parfilp, hreq->ihandle, hreq->ihandlen);
 }
 
 int
 xfs_open_by_handle(
-	xfs_mount_t		*mp,
-	xfs_fsop_handlereq_t	*hreq,
 	struct file		*parfilp,
-	struct inode		*parinode)
+	xfs_fsop_handlereq_t	*hreq)
 {
 	const struct cred	*cred = current_cred();
 	int			error;
-	int			new_fd;
+	int			fd;
 	int			permflag;
 	struct file		*filp;
 	struct inode		*inode;
@@ -263,19 +237,21 @@
 	if (!capable(CAP_SYS_ADMIN))
 		return -XFS_ERROR(EPERM);
 
-	error = xfs_vget_fsop_handlereq(mp, parinode, hreq, &inode);
-	if (error)
-		return -error;
+	dentry = xfs_handlereq_to_dentry(parfilp, hreq);
+	if (IS_ERR(dentry))
+		return PTR_ERR(dentry);
+	inode = dentry->d_inode;
 
 	/* Restrict xfs_open_by_handle to directories & regular files. */
 	if (!(S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode))) {
-		iput(inode);
-		return -XFS_ERROR(EINVAL);
+		error = -XFS_ERROR(EPERM);
+		goto out_dput;
 	}
 
 #if BITS_PER_LONG != 32
 	hreq->oflags |= O_LARGEFILE;
 #endif
+
 	/* Put open permission in namei format. */
 	permflag = hreq->oflags;
 	if ((permflag+1) & O_ACCMODE)
@@ -285,50 +261,45 @@
 
 	if ((!(permflag & O_APPEND) || (permflag & O_TRUNC)) &&
 	    (permflag & FMODE_WRITE) && IS_APPEND(inode)) {
-		iput(inode);
-		return -XFS_ERROR(EPERM);
+		error = -XFS_ERROR(EPERM);
+		goto out_dput;
 	}
 
 	if ((permflag & FMODE_WRITE) && IS_IMMUTABLE(inode)) {
-		iput(inode);
-		return -XFS_ERROR(EACCES);
+		error = -XFS_ERROR(EACCES);
+		goto out_dput;
 	}
 
 	/* Can't write directories. */
-	if ( S_ISDIR(inode->i_mode) && (permflag & FMODE_WRITE)) {
-		iput(inode);
-		return -XFS_ERROR(EISDIR);
+	if (S_ISDIR(inode->i_mode) && (permflag & FMODE_WRITE)) {
+		error = -XFS_ERROR(EISDIR);
+		goto out_dput;
 	}
 
-	if ((new_fd = get_unused_fd()) < 0) {
-		iput(inode);
-		return new_fd;
+	fd = get_unused_fd();
+	if (fd < 0) {
+		error = fd;
+		goto out_dput;
 	}
 
-	dentry = d_obtain_alias(inode);
-	if (IS_ERR(dentry)) {
-		put_unused_fd(new_fd);
-		return PTR_ERR(dentry);
-	}
-
-	/* Ensure umount returns EBUSY on umounts while this file is open. */
-	mntget(parfilp->f_path.mnt);
-
-	/* Create file pointer. */
-	filp = dentry_open(dentry, parfilp->f_path.mnt, hreq->oflags, cred);
+	filp = dentry_open(dentry, mntget(parfilp->f_path.mnt),
+			   hreq->oflags, cred);
 	if (IS_ERR(filp)) {
-		put_unused_fd(new_fd);
-		return -XFS_ERROR(-PTR_ERR(filp));
+		put_unused_fd(fd);
+		return PTR_ERR(filp);
 	}
 
 	if (inode->i_mode & S_IFREG) {
-		/* invisible operation should not change atime */
 		filp->f_flags |= O_NOATIME;
 		filp->f_mode |= FMODE_NOCMTIME;
 	}
 
-	fd_install(new_fd, filp);
-	return new_fd;
+	fd_install(fd, filp);
+	return fd;
+
+ out_dput:
+	dput(dentry);
+	return error;
 }
 
 /*
@@ -359,11 +330,10 @@
 
 int
 xfs_readlink_by_handle(
-	xfs_mount_t		*mp,
-	xfs_fsop_handlereq_t	*hreq,
-	struct inode		*parinode)
+	struct file		*parfilp,
+	xfs_fsop_handlereq_t	*hreq)
 {
-	struct inode		*inode;
+	struct dentry		*dentry;
 	__u32			olen;
 	void			*link;
 	int			error;
@@ -371,26 +341,28 @@
 	if (!capable(CAP_SYS_ADMIN))
 		return -XFS_ERROR(EPERM);
 
-	error = xfs_vget_fsop_handlereq(mp, parinode, hreq, &inode);
-	if (error)
-		return -error;
+	dentry = xfs_handlereq_to_dentry(parfilp, hreq);
+	if (IS_ERR(dentry))
+		return PTR_ERR(dentry);
 
 	/* Restrict this handle operation to symlinks only. */
-	if (!S_ISLNK(inode->i_mode)) {
+	if (!S_ISLNK(dentry->d_inode->i_mode)) {
 		error = -XFS_ERROR(EINVAL);
-		goto out_iput;
+		goto out_dput;
 	}
 
 	if (copy_from_user(&olen, hreq->ohandlen, sizeof(__u32))) {
 		error = -XFS_ERROR(EFAULT);
-		goto out_iput;
+		goto out_dput;
 	}
 
 	link = kmalloc(MAXPATHLEN+1, GFP_KERNEL);
-	if (!link)
-		goto out_iput;
+	if (!link) {
+		error = -XFS_ERROR(ENOMEM);
+		goto out_dput;
+	}
 
-	error = -xfs_readlink(XFS_I(inode), link);
+	error = -xfs_readlink(XFS_I(dentry->d_inode), link);
 	if (error)
 		goto out_kfree;
 	error = do_readlink(hreq->ohandle, olen, link);
@@ -399,32 +371,31 @@
 
  out_kfree:
 	kfree(link);
- out_iput:
-	iput(inode);
+ out_dput:
+	dput(dentry);
 	return error;
 }
 
 STATIC int
 xfs_fssetdm_by_handle(
-	xfs_mount_t		*mp,
-	void			__user *arg,
-	struct inode		*parinode)
+	struct file		*parfilp,
+	void			__user *arg)
 {
 	int			error;
 	struct fsdmidata	fsd;
 	xfs_fsop_setdm_handlereq_t dmhreq;
-	struct inode		*inode;
+	struct dentry		*dentry;
 
 	if (!capable(CAP_MKNOD))
 		return -XFS_ERROR(EPERM);
 	if (copy_from_user(&dmhreq, arg, sizeof(xfs_fsop_setdm_handlereq_t)))
 		return -XFS_ERROR(EFAULT);
 
-	error = xfs_vget_fsop_handlereq(mp, parinode, &dmhreq.hreq, &inode);
-	if (error)
-		return -error;
+	dentry = xfs_handlereq_to_dentry(parfilp, &dmhreq.hreq);
+	if (IS_ERR(dentry))
+		return PTR_ERR(dentry);
 
-	if (IS_IMMUTABLE(inode) || IS_APPEND(inode)) {
+	if (IS_IMMUTABLE(dentry->d_inode) || IS_APPEND(dentry->d_inode)) {
 		error = -XFS_ERROR(EPERM);
 		goto out;
 	}
@@ -434,24 +405,23 @@
 		goto out;
 	}
 
-	error = -xfs_set_dmattrs(XFS_I(inode), fsd.fsd_dmevmask,
+	error = -xfs_set_dmattrs(XFS_I(dentry->d_inode), fsd.fsd_dmevmask,
 				 fsd.fsd_dmstate);
 
  out:
-	iput(inode);
+	dput(dentry);
 	return error;
 }
 
 STATIC int
 xfs_attrlist_by_handle(
-	xfs_mount_t		*mp,
-	void			__user *arg,
-	struct inode		*parinode)
+	struct file		*parfilp,
+	void			__user *arg)
 {
-	int			error;
+	int			error = -ENOMEM;
 	attrlist_cursor_kern_t	*cursor;
 	xfs_fsop_attrlist_handlereq_t al_hreq;
-	struct inode		*inode;
+	struct dentry		*dentry;
 	char			*kbuf;
 
 	if (!capable(CAP_SYS_ADMIN))
@@ -467,16 +437,16 @@
 	if (al_hreq.flags & ~(ATTR_ROOT | ATTR_SECURE))
 		return -XFS_ERROR(EINVAL);
 
-	error = xfs_vget_fsop_handlereq(mp, parinode, &al_hreq.hreq, &inode);
-	if (error)
-		goto out;
+	dentry = xfs_handlereq_to_dentry(parfilp, &al_hreq.hreq);
+	if (IS_ERR(dentry))
+		return PTR_ERR(dentry);
 
 	kbuf = kmalloc(al_hreq.buflen, GFP_KERNEL);
 	if (!kbuf)
-		goto out_vn_rele;
+		goto out_dput;
 
 	cursor = (attrlist_cursor_kern_t *)&al_hreq.pos;
-	error = xfs_attr_list(XFS_I(inode), kbuf, al_hreq.buflen,
+	error = -xfs_attr_list(XFS_I(dentry->d_inode), kbuf, al_hreq.buflen,
 					al_hreq.flags, cursor);
 	if (error)
 		goto out_kfree;
@@ -486,10 +456,9 @@
 
  out_kfree:
 	kfree(kbuf);
- out_vn_rele:
-	iput(inode);
- out:
-	return -error;
+ out_dput:
+	dput(dentry);
+	return error;
 }
 
 int
@@ -564,15 +533,13 @@
 
 STATIC int
 xfs_attrmulti_by_handle(
-	xfs_mount_t		*mp,
-	void			__user *arg,
 	struct file		*parfilp,
-	struct inode		*parinode)
+	void			__user *arg)
 {
 	int			error;
 	xfs_attr_multiop_t	*ops;
 	xfs_fsop_attrmulti_handlereq_t am_hreq;
-	struct inode		*inode;
+	struct dentry		*dentry;
 	unsigned int		i, size;
 	char			*attr_name;
 
@@ -581,19 +548,19 @@
 	if (copy_from_user(&am_hreq, arg, sizeof(xfs_fsop_attrmulti_handlereq_t)))
 		return -XFS_ERROR(EFAULT);
 
-	error = xfs_vget_fsop_handlereq(mp, parinode, &am_hreq.hreq, &inode);
-	if (error)
-		goto out;
+	dentry = xfs_handlereq_to_dentry(parfilp, &am_hreq.hreq);
+	if (IS_ERR(dentry))
+		return PTR_ERR(dentry);
 
 	error = E2BIG;
 	size = am_hreq.opcount * sizeof(xfs_attr_multiop_t);
 	if (!size || size > 16 * PAGE_SIZE)
-		goto out_vn_rele;
+		goto out_dput;
 
 	error = ENOMEM;
 	ops = kmalloc(size, GFP_KERNEL);
 	if (!ops)
-		goto out_vn_rele;
+		goto out_dput;
 
 	error = EFAULT;
 	if (copy_from_user(ops, am_hreq.ops, size))
@@ -615,25 +582,28 @@
 
 		switch (ops[i].am_opcode) {
 		case ATTR_OP_GET:
-			ops[i].am_error = xfs_attrmulti_attr_get(inode,
-					attr_name, ops[i].am_attrvalue,
-					&ops[i].am_length, ops[i].am_flags);
+			ops[i].am_error = xfs_attrmulti_attr_get(
+					dentry->d_inode, attr_name,
+					ops[i].am_attrvalue, &ops[i].am_length,
+					ops[i].am_flags);
 			break;
 		case ATTR_OP_SET:
 			ops[i].am_error = mnt_want_write(parfilp->f_path.mnt);
 			if (ops[i].am_error)
 				break;
-			ops[i].am_error = xfs_attrmulti_attr_set(inode,
-					attr_name, ops[i].am_attrvalue,
-					ops[i].am_length, ops[i].am_flags);
+			ops[i].am_error = xfs_attrmulti_attr_set(
+					dentry->d_inode, attr_name,
+					ops[i].am_attrvalue, ops[i].am_length,
+					ops[i].am_flags);
 			mnt_drop_write(parfilp->f_path.mnt);
 			break;
 		case ATTR_OP_REMOVE:
 			ops[i].am_error = mnt_want_write(parfilp->f_path.mnt);
 			if (ops[i].am_error)
 				break;
-			ops[i].am_error = xfs_attrmulti_attr_remove(inode,
-					attr_name, ops[i].am_flags);
+			ops[i].am_error = xfs_attrmulti_attr_remove(
+					dentry->d_inode, attr_name,
+					ops[i].am_flags);
 			mnt_drop_write(parfilp->f_path.mnt);
 			break;
 		default:
@@ -647,9 +617,8 @@
 	kfree(attr_name);
  out_kfree_ops:
 	kfree(ops);
- out_vn_rele:
-	iput(inode);
- out:
+ out_dput:
+	dput(dentry);
 	return -error;
 }
 
@@ -1440,23 +1409,23 @@
 
 		if (copy_from_user(&hreq, arg, sizeof(xfs_fsop_handlereq_t)))
 			return -XFS_ERROR(EFAULT);
-		return xfs_open_by_handle(mp, &hreq, filp, inode);
+		return xfs_open_by_handle(filp, &hreq);
 	}
 	case XFS_IOC_FSSETDM_BY_HANDLE:
-		return xfs_fssetdm_by_handle(mp, arg, inode);
+		return xfs_fssetdm_by_handle(filp, arg);
 
 	case XFS_IOC_READLINK_BY_HANDLE: {
 		xfs_fsop_handlereq_t	hreq;
 
 		if (copy_from_user(&hreq, arg, sizeof(xfs_fsop_handlereq_t)))
 			return -XFS_ERROR(EFAULT);
-		return xfs_readlink_by_handle(mp, &hreq, inode);
+		return xfs_readlink_by_handle(filp, &hreq);
 	}
 	case XFS_IOC_ATTRLIST_BY_HANDLE:
-		return xfs_attrlist_by_handle(mp, arg, inode);
+		return xfs_attrlist_by_handle(filp, arg);
 
 	case XFS_IOC_ATTRMULTI_BY_HANDLE:
-		return xfs_attrmulti_by_handle(mp, arg, filp, inode);
+		return xfs_attrmulti_by_handle(filp, arg);
 
 	case XFS_IOC_SWAPEXT: {
 		struct xfs_swapext	sxp;
diff --git a/fs/xfs/linux-2.6/xfs_ioctl.h b/fs/xfs/linux-2.6/xfs_ioctl.h
index 8c16bf2..7bd7c6a 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl.h
+++ b/fs/xfs/linux-2.6/xfs_ioctl.h
@@ -34,16 +34,13 @@
 
 extern int
 xfs_open_by_handle(
-	xfs_mount_t		*mp,
-	xfs_fsop_handlereq_t	*hreq,
 	struct file		*parfilp,
-	struct inode		*parinode);
+	xfs_fsop_handlereq_t	*hreq);
 
 extern int
 xfs_readlink_by_handle(
-	xfs_mount_t		*mp,
-	xfs_fsop_handlereq_t	*hreq,
-	struct inode		*parinode);
+	struct file		*parfilp,
+	xfs_fsop_handlereq_t	*hreq);
 
 extern int
 xfs_attrmulti_attr_get(
@@ -67,6 +64,12 @@
 	char			*name,
 	__uint32_t		flags);
 
+extern struct dentry *
+xfs_handle_to_dentry(
+	struct file		*parfilp,
+	void __user		*uhandle,
+	u32			hlen);
+
 extern long
 xfs_file_ioctl(
 	struct file		*filp,
diff --git a/fs/xfs/linux-2.6/xfs_ioctl32.c b/fs/xfs/linux-2.6/xfs_ioctl32.c
index 50903ad..c70c4e3 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl32.c
+++ b/fs/xfs/linux-2.6/xfs_ioctl32.c
@@ -17,6 +17,7 @@
  */
 #include <linux/compat.h>
 #include <linux/ioctl.h>
+#include <linux/mount.h>
 #include <asm/uaccess.h>
 #include "xfs.h"
 #include "xfs_fs.h"
@@ -340,96 +341,24 @@
 	return 0;
 }
 
-/*
- * Convert userspace handle data into inode.
- *
- * We use the fact that all the fsop_handlereq ioctl calls have a data
- * structure argument whose first component is always a xfs_fsop_handlereq_t,
- * so we can pass that sub structure into this handy, shared routine.
- *
- * If no error, caller must always iput the returned inode.
- */
-STATIC int
-xfs_vget_fsop_handlereq_compat(
-	xfs_mount_t		*mp,
-	struct inode		*parinode,	/* parent inode pointer    */
-	compat_xfs_fsop_handlereq_t	*hreq,
-	struct inode		**inode)
+STATIC struct dentry *
+xfs_compat_handlereq_to_dentry(
+	struct file		*parfilp,
+	compat_xfs_fsop_handlereq_t *hreq)
 {
-	void			__user *hanp;
-	size_t			hlen;
-	xfs_fid_t		*xfid;
-	xfs_handle_t		*handlep;
-	xfs_handle_t		handle;
-	xfs_inode_t		*ip;
-	xfs_ino_t		ino;
-	__u32			igen;
-	int			error;
-
-	/*
-	 * Only allow handle opens under a directory.
-	 */
-	if (!S_ISDIR(parinode->i_mode))
-		return XFS_ERROR(ENOTDIR);
-
-	hanp = compat_ptr(hreq->ihandle);
-	hlen = hreq->ihandlen;
-	handlep = &handle;
-
-	if (hlen < sizeof(handlep->ha_fsid) || hlen > sizeof(*handlep))
-		return XFS_ERROR(EINVAL);
-	if (copy_from_user(handlep, hanp, hlen))
-		return XFS_ERROR(EFAULT);
-	if (hlen < sizeof(*handlep))
-		memset(((char *)handlep) + hlen, 0, sizeof(*handlep) - hlen);
-	if (hlen > sizeof(handlep->ha_fsid)) {
-		if (handlep->ha_fid.fid_len !=
-		    (hlen - sizeof(handlep->ha_fsid) -
-			    sizeof(handlep->ha_fid.fid_len)) ||
-		    handlep->ha_fid.fid_pad)
-			return XFS_ERROR(EINVAL);
-	}
-
-	/*
-	 * Crack the handle, obtain the inode # & generation #
-	 */
-	xfid = (struct xfs_fid *)&handlep->ha_fid;
-	if (xfid->fid_len == sizeof(*xfid) - sizeof(xfid->fid_len)) {
-		ino  = xfid->fid_ino;
-		igen = xfid->fid_gen;
-	} else {
-		return XFS_ERROR(EINVAL);
-	}
-
-	/*
-	 * Get the XFS inode, building a Linux inode to go with it.
-	 */
-	error = xfs_iget(mp, NULL, ino, 0, XFS_ILOCK_SHARED, &ip, 0);
-	if (error)
-		return error;
-	if (ip == NULL)
-		return XFS_ERROR(EIO);
-	if (ip->i_d.di_gen != igen) {
-		xfs_iput_new(ip, XFS_ILOCK_SHARED);
-		return XFS_ERROR(ENOENT);
-	}
-
-	xfs_iunlock(ip, XFS_ILOCK_SHARED);
-
-	*inode = VFS_I(ip);
-	return 0;
+	return xfs_handle_to_dentry(parfilp,
+			compat_ptr(hreq->ihandle), hreq->ihandlen);
 }
 
 STATIC int
 xfs_compat_attrlist_by_handle(
-	xfs_mount_t		*mp,
-	void			__user *arg,
-	struct inode		*parinode)
+	struct file		*parfilp,
+	void			__user *arg)
 {
 	int			error;
 	attrlist_cursor_kern_t	*cursor;
 	compat_xfs_fsop_attrlist_handlereq_t al_hreq;
-	struct inode		*inode;
+	struct dentry		*dentry;
 	char			*kbuf;
 
 	if (!capable(CAP_SYS_ADMIN))
@@ -446,17 +375,17 @@
 	if (al_hreq.flags & ~(ATTR_ROOT | ATTR_SECURE))
 		return -XFS_ERROR(EINVAL);
 
-	error = xfs_vget_fsop_handlereq_compat(mp, parinode, &al_hreq.hreq,
-					       &inode);
-	if (error)
-		goto out;
+	dentry = xfs_compat_handlereq_to_dentry(parfilp, &al_hreq.hreq);
+	if (IS_ERR(dentry))
+		return PTR_ERR(dentry);
 
+	error = -ENOMEM;
 	kbuf = kmalloc(al_hreq.buflen, GFP_KERNEL);
 	if (!kbuf)
-		goto out_vn_rele;
+		goto out_dput;
 
 	cursor = (attrlist_cursor_kern_t *)&al_hreq.pos;
-	error = xfs_attr_list(XFS_I(inode), kbuf, al_hreq.buflen,
+	error = -xfs_attr_list(XFS_I(dentry->d_inode), kbuf, al_hreq.buflen,
 					al_hreq.flags, cursor);
 	if (error)
 		goto out_kfree;
@@ -466,22 +395,20 @@
 
  out_kfree:
 	kfree(kbuf);
- out_vn_rele:
-	iput(inode);
- out:
-	return -error;
+ out_dput:
+	dput(dentry);
+	return error;
 }
 
 STATIC int
 xfs_compat_attrmulti_by_handle(
-	xfs_mount_t				*mp,
-	void					__user *arg,
-	struct inode				*parinode)
+	struct file				*parfilp,
+	void					__user *arg)
 {
 	int					error;
 	compat_xfs_attr_multiop_t		*ops;
 	compat_xfs_fsop_attrmulti_handlereq_t	am_hreq;
-	struct inode				*inode;
+	struct dentry				*dentry;
 	unsigned int				i, size;
 	char					*attr_name;
 
@@ -491,20 +418,19 @@
 			   sizeof(compat_xfs_fsop_attrmulti_handlereq_t)))
 		return -XFS_ERROR(EFAULT);
 
-	error = xfs_vget_fsop_handlereq_compat(mp, parinode, &am_hreq.hreq,
-					       &inode);
-	if (error)
-		goto out;
+	dentry = xfs_compat_handlereq_to_dentry(parfilp, &am_hreq.hreq);
+	if (IS_ERR(dentry))
+		return PTR_ERR(dentry);
 
 	error = E2BIG;
 	size = am_hreq.opcount * sizeof(compat_xfs_attr_multiop_t);
 	if (!size || size > 16 * PAGE_SIZE)
-		goto out_vn_rele;
+		goto out_dput;
 
 	error = ENOMEM;
 	ops = kmalloc(size, GFP_KERNEL);
 	if (!ops)
-		goto out_vn_rele;
+		goto out_dput;
 
 	error = EFAULT;
 	if (copy_from_user(ops, compat_ptr(am_hreq.ops), size))
@@ -527,20 +453,29 @@
 
 		switch (ops[i].am_opcode) {
 		case ATTR_OP_GET:
-			ops[i].am_error = xfs_attrmulti_attr_get(inode,
-					attr_name,
+			ops[i].am_error = xfs_attrmulti_attr_get(
+					dentry->d_inode, attr_name,
 					compat_ptr(ops[i].am_attrvalue),
 					&ops[i].am_length, ops[i].am_flags);
 			break;
 		case ATTR_OP_SET:
-			ops[i].am_error = xfs_attrmulti_attr_set(inode,
-					attr_name,
+			ops[i].am_error = mnt_want_write(parfilp->f_path.mnt);
+			if (ops[i].am_error)
+				break;
+			ops[i].am_error = xfs_attrmulti_attr_set(
+					dentry->d_inode, attr_name,
 					compat_ptr(ops[i].am_attrvalue),
 					ops[i].am_length, ops[i].am_flags);
+			mnt_drop_write(parfilp->f_path.mnt);
 			break;
 		case ATTR_OP_REMOVE:
-			ops[i].am_error = xfs_attrmulti_attr_remove(inode,
-					attr_name, ops[i].am_flags);
+			ops[i].am_error = mnt_want_write(parfilp->f_path.mnt);
+			if (ops[i].am_error)
+				break;
+			ops[i].am_error = xfs_attrmulti_attr_remove(
+					dentry->d_inode, attr_name,
+					ops[i].am_flags);
+			mnt_drop_write(parfilp->f_path.mnt);
 			break;
 		default:
 			ops[i].am_error = EINVAL;
@@ -553,22 +488,20 @@
 	kfree(attr_name);
  out_kfree_ops:
 	kfree(ops);
- out_vn_rele:
-	iput(inode);
- out:
+ out_dput:
+	dput(dentry);
 	return -error;
 }
 
 STATIC int
 xfs_compat_fssetdm_by_handle(
-	xfs_mount_t		*mp,
-	void			__user *arg,
-	struct inode		*parinode)
+	struct file		*parfilp,
+	void			__user *arg)
 {
 	int			error;
 	struct fsdmidata	fsd;
 	compat_xfs_fsop_setdm_handlereq_t dmhreq;
-	struct inode		*inode;
+	struct dentry		*dentry;
 
 	if (!capable(CAP_MKNOD))
 		return -XFS_ERROR(EPERM);
@@ -576,12 +509,11 @@
 			   sizeof(compat_xfs_fsop_setdm_handlereq_t)))
 		return -XFS_ERROR(EFAULT);
 
-	error = xfs_vget_fsop_handlereq_compat(mp, parinode, &dmhreq.hreq,
-					       &inode);
-	if (error)
-		return -error;
+	dentry = xfs_compat_handlereq_to_dentry(parfilp, &dmhreq.hreq);
+	if (IS_ERR(dentry))
+		return PTR_ERR(dentry);
 
-	if (IS_IMMUTABLE(inode) || IS_APPEND(inode)) {
+	if (IS_IMMUTABLE(dentry->d_inode) || IS_APPEND(dentry->d_inode)) {
 		error = -XFS_ERROR(EPERM);
 		goto out;
 	}
@@ -591,11 +523,11 @@
 		goto out;
 	}
 
-	error = -xfs_set_dmattrs(XFS_I(inode), fsd.fsd_dmevmask,
+	error = -xfs_set_dmattrs(XFS_I(dentry->d_inode), fsd.fsd_dmevmask,
 				 fsd.fsd_dmstate);
 
 out:
-	iput(inode);
+	dput(dentry);
 	return error;
 }
 
@@ -722,21 +654,21 @@
 
 		if (xfs_compat_handlereq_copyin(&hreq, arg))
 			return -XFS_ERROR(EFAULT);
-		return xfs_open_by_handle(mp, &hreq, filp, inode);
+		return xfs_open_by_handle(filp, &hreq);
 	}
 	case XFS_IOC_READLINK_BY_HANDLE_32: {
 		struct xfs_fsop_handlereq	hreq;
 
 		if (xfs_compat_handlereq_copyin(&hreq, arg))
 			return -XFS_ERROR(EFAULT);
-		return xfs_readlink_by_handle(mp, &hreq, inode);
+		return xfs_readlink_by_handle(filp, &hreq);
 	}
 	case XFS_IOC_ATTRLIST_BY_HANDLE_32:
-		return xfs_compat_attrlist_by_handle(mp, arg, inode);
+		return xfs_compat_attrlist_by_handle(filp, arg);
 	case XFS_IOC_ATTRMULTI_BY_HANDLE_32:
-		return xfs_compat_attrmulti_by_handle(mp, arg, inode);
+		return xfs_compat_attrmulti_by_handle(filp, arg);
 	case XFS_IOC_FSSETDM_BY_HANDLE_32:
-		return xfs_compat_fssetdm_by_handle(mp, arg, inode);
+		return xfs_compat_fssetdm_by_handle(filp, arg);
 	default:
 		return -XFS_ERROR(ENOIOCTLCMD);
 	}
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index 95a9710..c71e226 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -1197,6 +1197,7 @@
 	struct xfs_mount	*mp = XFS_M(sb);
 	substring_t		args[MAX_OPT_ARGS];
 	char			*p;
+	int			error;
 
 	while ((p = strsep(&options, ",")) != NULL) {
 		int token;
@@ -1247,11 +1248,25 @@
 		}
 	}
 
-	/* rw/ro -> rw */
+	/* ro -> rw */
 	if ((mp->m_flags & XFS_MOUNT_RDONLY) && !(*flags & MS_RDONLY)) {
 		mp->m_flags &= ~XFS_MOUNT_RDONLY;
 		if (mp->m_flags & XFS_MOUNT_BARRIER)
 			xfs_mountfs_check_barriers(mp);
+
+		/*
+		 * If this is the first remount to writeable state we
+		 * might have some superblock changes to update.
+		 */
+		if (mp->m_update_flags) {
+			error = xfs_mount_log_sb(mp, mp->m_update_flags);
+			if (error) {
+				cmn_err(CE_WARN,
+					"XFS: failed to write sb changes");
+				return error;
+			}
+			mp->m_update_flags = 0;
+		}
 	}
 
 	/* rw -> ro */
diff --git a/fs/xfs/quota/xfs_dquot.c b/fs/xfs/quota/xfs_dquot.c
index 591ca660..6543c0b 100644
--- a/fs/xfs/quota/xfs_dquot.c
+++ b/fs/xfs/quota/xfs_dquot.c
@@ -73,6 +73,8 @@
 int xfs_dqerror_mod = 33;
 #endif
 
+static struct lock_class_key xfs_dquot_other_class;
+
 /*
  * Allocate and initialize a dquot. We don't always allocate fresh memory;
  * we try to reclaim a free dquot if the number of incore dquots are above
@@ -139,7 +141,15 @@
 		 ASSERT(dqp->q_trace);
 		 xfs_dqtrace_entry(dqp, "DQRECLAIMED_INIT");
 #endif
-	 }
+	}
+
+	/*
+	 * In either case we need to make sure group quotas have a different
+	 * lock class than user quotas, to make sure lockdep knows we can
+	 * locks of one of each at the same time.
+	 */
+	if (!(type & XFS_DQ_USER))
+		lockdep_set_class(&dqp->q_qlock, &xfs_dquot_other_class);
 
 	/*
 	 * log item gets initialized later
@@ -421,7 +431,7 @@
 	/*
 	 * Initialize the bmap freelist prior to calling bmapi code.
 	 */
-	XFS_BMAP_INIT(&flist, &firstblock);
+	xfs_bmap_init(&flist, &firstblock);
 	xfs_ilock(quotip, XFS_ILOCK_EXCL);
 	/*
 	 * Return if this type of quotas is turned off while we didn't
@@ -1383,6 +1393,12 @@
 	mutex_unlock(&(dqp->q_qlock));
 }
 
+/*
+ * Lock two xfs_dquot structures.
+ *
+ * To avoid deadlocks we always lock the quota structure with
+ * the lowerd id first.
+ */
 void
 xfs_dqlock2(
 	xfs_dquot_t	*d1,
@@ -1392,18 +1408,16 @@
 		ASSERT(d1 != d2);
 		if (be32_to_cpu(d1->q_core.d_id) >
 		    be32_to_cpu(d2->q_core.d_id)) {
-			xfs_dqlock(d2);
-			xfs_dqlock(d1);
+			mutex_lock(&d2->q_qlock);
+			mutex_lock_nested(&d1->q_qlock, XFS_QLOCK_NESTED);
 		} else {
-			xfs_dqlock(d1);
-			xfs_dqlock(d2);
+			mutex_lock(&d1->q_qlock);
+			mutex_lock_nested(&d2->q_qlock, XFS_QLOCK_NESTED);
 		}
-	} else {
-		if (d1) {
-			xfs_dqlock(d1);
-		} else if (d2) {
-			xfs_dqlock(d2);
-		}
+	} else if (d1) {
+		mutex_lock(&d1->q_qlock);
+	} else if (d2) {
+		mutex_lock(&d2->q_qlock);
 	}
 }
 
diff --git a/fs/xfs/quota/xfs_dquot.h b/fs/xfs/quota/xfs_dquot.h
index 7e455337..d443e93 100644
--- a/fs/xfs/quota/xfs_dquot.h
+++ b/fs/xfs/quota/xfs_dquot.h
@@ -97,6 +97,16 @@
 #define dq_hashlist	q_lists.dqm_hashlist
 #define dq_flags	q_lists.dqm_flags
 
+/*
+ * Lock hierachy for q_qlock:
+ *	XFS_QLOCK_NORMAL is the implicit default,
+ * 	XFS_QLOCK_NESTED is the dquot with the higher id in xfs_dqlock2
+ */
+enum {
+	XFS_QLOCK_NORMAL = 0,
+	XFS_QLOCK_NESTED,
+};
+
 #define XFS_DQHOLD(dqp)		((dqp)->q_nrefs++)
 
 #ifdef DEBUG
diff --git a/fs/xfs/quota/xfs_qm.c b/fs/xfs/quota/xfs_qm.c
index 6b13960..7a2beb6 100644
--- a/fs/xfs/quota/xfs_qm.c
+++ b/fs/xfs/quota/xfs_qm.c
@@ -1070,6 +1070,13 @@
 	return 0;
 }
 
+/*
+ * The hash chains and the mplist use the same xfs_dqhash structure as
+ * their list head, but we can take the mplist qh_lock and one of the
+ * hash qh_locks at the same time without any problem as they aren't
+ * related.
+ */
+static struct lock_class_key xfs_quota_mplist_class;
 
 /*
  * This initializes all the quota information that's kept in the
@@ -1105,6 +1112,8 @@
 	}
 
 	xfs_qm_list_init(&qinf->qi_dqlist, "mpdqlist", 0);
+	lockdep_set_class(&qinf->qi_dqlist.qh_lock, &xfs_quota_mplist_class);
+
 	qinf->qi_dqreclaims = 0;
 
 	/* mutex used to serialize quotaoffs */
diff --git a/fs/xfs/xfs_acl.h b/fs/xfs/xfs_acl.h
index a4e293b..642f1db 100644
--- a/fs/xfs/xfs_acl.h
+++ b/fs/xfs/xfs_acl.h
@@ -22,7 +22,6 @@
  * Access Control Lists
  */
 typedef __uint16_t	xfs_acl_perm_t;
-typedef __int32_t	xfs_acl_type_t;
 typedef __int32_t	xfs_acl_tag_t;
 typedef __int32_t	xfs_acl_id_t;
 
diff --git a/fs/xfs/xfs_ag.h b/fs/xfs/xfs_ag.h
index f2e2181..143d63e 100644
--- a/fs/xfs/xfs_ag.h
+++ b/fs/xfs/xfs_ag.h
@@ -231,7 +231,7 @@
 #define	XFS_FSB_TO_AGNO(mp,fsbno)	\
 	((xfs_agnumber_t)((fsbno) >> (mp)->m_sb.sb_agblklog))
 #define	XFS_FSB_TO_AGBNO(mp,fsbno)	\
-	((xfs_agblock_t)((fsbno) & XFS_MASK32LO((mp)->m_sb.sb_agblklog)))
+	((xfs_agblock_t)((fsbno) & xfs_mask32lo((mp)->m_sb.sb_agblklog)))
 #define	XFS_AGB_TO_DADDR(mp,agno,agbno)	\
 	((xfs_daddr_t)XFS_FSB_TO_BB(mp, \
 		(xfs_fsblock_t)(agno) * (mp)->m_sb.sb_agblocks + (agbno)))
@@ -244,8 +244,8 @@
 #define	XFS_AG_CHECK_DADDR(mp,d,len)	\
 	((len) == 1 ? \
 	    ASSERT((d) == XFS_SB_DADDR || \
-		   XFS_DADDR_TO_AGBNO(mp, d) != XFS_SB_DADDR) : \
-	    ASSERT(XFS_DADDR_TO_AGNO(mp, d) == \
-		   XFS_DADDR_TO_AGNO(mp, (d) + (len) - 1)))
+		   xfs_daddr_to_agbno(mp, d) != XFS_SB_DADDR) : \
+	    ASSERT(xfs_daddr_to_agno(mp, d) == \
+		   xfs_daddr_to_agno(mp, (d) + (len) - 1)))
 
 #endif	/* __XFS_AG_H__ */
diff --git a/fs/xfs/xfs_alloc_btree.c b/fs/xfs/xfs_alloc_btree.c
index 733cb75..c10c3a2 100644
--- a/fs/xfs/xfs_alloc_btree.c
+++ b/fs/xfs/xfs_alloc_btree.c
@@ -115,7 +115,7 @@
 	xfs_agblock_t		bno;
 	int			error;
 
-	bno = XFS_DADDR_TO_AGBNO(cur->bc_mp, XFS_BUF_ADDR(bp));
+	bno = xfs_daddr_to_agbno(cur->bc_mp, XFS_BUF_ADDR(bp));
 	error = xfs_alloc_put_freelist(cur->bc_tp, agbp, NULL, bno, 1);
 	if (error)
 		return error;
diff --git a/fs/xfs/xfs_attr.c b/fs/xfs/xfs_attr.c
index f7cdc28..5fde165 100644
--- a/fs/xfs/xfs_attr.c
+++ b/fs/xfs/xfs_attr.c
@@ -374,7 +374,7 @@
 		 * It won't fit in the shortform, transform to a leaf block.
 		 * GROT: another possible req'mt for a double-split btree op.
 		 */
-		XFS_BMAP_INIT(args.flist, args.firstblock);
+		xfs_bmap_init(args.flist, args.firstblock);
 		error = xfs_attr_shortform_to_leaf(&args);
 		if (!error) {
 			error = xfs_bmap_finish(&args.trans, args.flist,
@@ -956,7 +956,7 @@
 		 * Commit that transaction so that the node_addname() call
 		 * can manage its own transactions.
 		 */
-		XFS_BMAP_INIT(args->flist, args->firstblock);
+		xfs_bmap_init(args->flist, args->firstblock);
 		error = xfs_attr_leaf_to_node(args);
 		if (!error) {
 			error = xfs_bmap_finish(&args->trans, args->flist,
@@ -1057,7 +1057,7 @@
 		 * If the result is small enough, shrink it all into the inode.
 		 */
 		if ((forkoff = xfs_attr_shortform_allfit(bp, dp))) {
-			XFS_BMAP_INIT(args->flist, args->firstblock);
+			xfs_bmap_init(args->flist, args->firstblock);
 			error = xfs_attr_leaf_to_shortform(bp, args, forkoff);
 			/* bp is gone due to xfs_da_shrink_inode */
 			if (!error) {
@@ -1135,7 +1135,7 @@
 	 * If the result is small enough, shrink it all into the inode.
 	 */
 	if ((forkoff = xfs_attr_shortform_allfit(bp, dp))) {
-		XFS_BMAP_INIT(args->flist, args->firstblock);
+		xfs_bmap_init(args->flist, args->firstblock);
 		error = xfs_attr_leaf_to_shortform(bp, args, forkoff);
 		/* bp is gone due to xfs_da_shrink_inode */
 		if (!error) {
@@ -1290,7 +1290,7 @@
 			 * have been a b-tree.
 			 */
 			xfs_da_state_free(state);
-			XFS_BMAP_INIT(args->flist, args->firstblock);
+			xfs_bmap_init(args->flist, args->firstblock);
 			error = xfs_attr_leaf_to_node(args);
 			if (!error) {
 				error = xfs_bmap_finish(&args->trans,
@@ -1331,7 +1331,7 @@
 		 * in the index/blkno/rmtblkno/rmtblkcnt fields and
 		 * in the index2/blkno2/rmtblkno2/rmtblkcnt2 fields.
 		 */
-		XFS_BMAP_INIT(args->flist, args->firstblock);
+		xfs_bmap_init(args->flist, args->firstblock);
 		error = xfs_da_split(state);
 		if (!error) {
 			error = xfs_bmap_finish(&args->trans, args->flist,
@@ -1443,7 +1443,7 @@
 		 * Check to see if the tree needs to be collapsed.
 		 */
 		if (retval && (state->path.active > 1)) {
-			XFS_BMAP_INIT(args->flist, args->firstblock);
+			xfs_bmap_init(args->flist, args->firstblock);
 			error = xfs_da_join(state);
 			if (!error) {
 				error = xfs_bmap_finish(&args->trans,
@@ -1579,7 +1579,7 @@
 	 * Check to see if the tree needs to be collapsed.
 	 */
 	if (retval && (state->path.active > 1)) {
-		XFS_BMAP_INIT(args->flist, args->firstblock);
+		xfs_bmap_init(args->flist, args->firstblock);
 		error = xfs_da_join(state);
 		if (!error) {
 			error = xfs_bmap_finish(&args->trans, args->flist,
@@ -1630,7 +1630,7 @@
 						       == XFS_ATTR_LEAF_MAGIC);
 
 		if ((forkoff = xfs_attr_shortform_allfit(bp, dp))) {
-			XFS_BMAP_INIT(args->flist, args->firstblock);
+			xfs_bmap_init(args->flist, args->firstblock);
 			error = xfs_attr_leaf_to_shortform(bp, args, forkoff);
 			/* bp is gone due to xfs_da_shrink_inode */
 			if (!error) {
@@ -2069,7 +2069,7 @@
 		/*
 		 * Allocate a single extent, up to the size of the value.
 		 */
-		XFS_BMAP_INIT(args->flist, args->firstblock);
+		xfs_bmap_init(args->flist, args->firstblock);
 		nmap = 1;
 		error = xfs_bmapi(args->trans, dp, (xfs_fileoff_t)lblkno,
 				  blkcnt,
@@ -2123,7 +2123,7 @@
 		/*
 		 * Try to remember where we decided to put the value.
 		 */
-		XFS_BMAP_INIT(args->flist, args->firstblock);
+		xfs_bmap_init(args->flist, args->firstblock);
 		nmap = 1;
 		error = xfs_bmapi(NULL, dp, (xfs_fileoff_t)lblkno,
 				  args->rmtblkcnt,
@@ -2188,7 +2188,7 @@
 		/*
 		 * Try to remember where we decided to put the value.
 		 */
-		XFS_BMAP_INIT(args->flist, args->firstblock);
+		xfs_bmap_init(args->flist, args->firstblock);
 		nmap = 1;
 		error = xfs_bmapi(NULL, args->dp, (xfs_fileoff_t)lblkno,
 					args->rmtblkcnt,
@@ -2229,7 +2229,7 @@
 	blkcnt = args->rmtblkcnt;
 	done = 0;
 	while (!done) {
-		XFS_BMAP_INIT(args->flist, args->firstblock);
+		xfs_bmap_init(args->flist, args->firstblock);
 		error = xfs_bunmapi(args->trans, args->dp, lblkno, blkcnt,
 				    XFS_BMAPI_ATTRFORK | XFS_BMAPI_METADATA,
 				    1, args->firstblock, args->flist,
diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c
index 79da6b2..6c323f8 100644
--- a/fs/xfs/xfs_attr_leaf.c
+++ b/fs/xfs/xfs_attr_leaf.c
@@ -736,7 +736,7 @@
 			continue;		/* don't copy partial entries */
 		if (!(entry->flags & XFS_ATTR_LOCAL))
 			return(0);
-		name_loc = XFS_ATTR_LEAF_NAME_LOCAL(leaf, i);
+		name_loc = xfs_attr_leaf_name_local(leaf, i);
 		if (name_loc->namelen >= XFS_ATTR_SF_ENTSIZE_MAX)
 			return(0);
 		if (be16_to_cpu(name_loc->valuelen) >= XFS_ATTR_SF_ENTSIZE_MAX)
@@ -823,7 +823,7 @@
 		if (!entry->nameidx)
 			continue;
 		ASSERT(entry->flags & XFS_ATTR_LOCAL);
-		name_loc = XFS_ATTR_LEAF_NAME_LOCAL(leaf, i);
+		name_loc = xfs_attr_leaf_name_local(leaf, i);
 		nargs.name = (char *)name_loc->nameval;
 		nargs.namelen = name_loc->namelen;
 		nargs.value = (char *)&name_loc->nameval[nargs.namelen];
@@ -1141,14 +1141,14 @@
 	 * as part of this transaction (a split operation for example).
 	 */
 	if (entry->flags & XFS_ATTR_LOCAL) {
-		name_loc = XFS_ATTR_LEAF_NAME_LOCAL(leaf, args->index);
+		name_loc = xfs_attr_leaf_name_local(leaf, args->index);
 		name_loc->namelen = args->namelen;
 		name_loc->valuelen = cpu_to_be16(args->valuelen);
 		memcpy((char *)name_loc->nameval, args->name, args->namelen);
 		memcpy((char *)&name_loc->nameval[args->namelen], args->value,
 				   be16_to_cpu(name_loc->valuelen));
 	} else {
-		name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf, args->index);
+		name_rmt = xfs_attr_leaf_name_remote(leaf, args->index);
 		name_rmt->namelen = args->namelen;
 		memcpy((char *)name_rmt->name, args->name, args->namelen);
 		entry->flags |= XFS_ATTR_INCOMPLETE;
@@ -1159,7 +1159,7 @@
 		args->rmtblkcnt = XFS_B_TO_FSB(mp, args->valuelen);
 	}
 	xfs_da_log_buf(args->trans, bp,
-	     XFS_DA_LOGRANGE(leaf, XFS_ATTR_LEAF_NAME(leaf, args->index),
+	     XFS_DA_LOGRANGE(leaf, xfs_attr_leaf_name(leaf, args->index),
 				   xfs_attr_leaf_entsize(leaf, args->index)));
 
 	/*
@@ -1749,10 +1749,10 @@
 	/*
 	 * Compress the remaining entries and zero out the removed stuff.
 	 */
-	memset(XFS_ATTR_LEAF_NAME(leaf, args->index), 0, entsize);
+	memset(xfs_attr_leaf_name(leaf, args->index), 0, entsize);
 	be16_add_cpu(&hdr->usedbytes, -entsize);
 	xfs_da_log_buf(args->trans, bp,
-	     XFS_DA_LOGRANGE(leaf, XFS_ATTR_LEAF_NAME(leaf, args->index),
+	     XFS_DA_LOGRANGE(leaf, xfs_attr_leaf_name(leaf, args->index),
 				   entsize));
 
 	tmp = (be16_to_cpu(hdr->count) - args->index)
@@ -1985,7 +1985,7 @@
 			continue;
 		}
 		if (entry->flags & XFS_ATTR_LOCAL) {
-			name_loc = XFS_ATTR_LEAF_NAME_LOCAL(leaf, probe);
+			name_loc = xfs_attr_leaf_name_local(leaf, probe);
 			if (name_loc->namelen != args->namelen)
 				continue;
 			if (memcmp(args->name, (char *)name_loc->nameval, args->namelen) != 0)
@@ -1995,7 +1995,7 @@
 			args->index = probe;
 			return(XFS_ERROR(EEXIST));
 		} else {
-			name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf, probe);
+			name_rmt = xfs_attr_leaf_name_remote(leaf, probe);
 			if (name_rmt->namelen != args->namelen)
 				continue;
 			if (memcmp(args->name, (char *)name_rmt->name,
@@ -2035,7 +2035,7 @@
 
 	entry = &leaf->entries[args->index];
 	if (entry->flags & XFS_ATTR_LOCAL) {
-		name_loc = XFS_ATTR_LEAF_NAME_LOCAL(leaf, args->index);
+		name_loc = xfs_attr_leaf_name_local(leaf, args->index);
 		ASSERT(name_loc->namelen == args->namelen);
 		ASSERT(memcmp(args->name, name_loc->nameval, args->namelen) == 0);
 		valuelen = be16_to_cpu(name_loc->valuelen);
@@ -2050,7 +2050,7 @@
 		args->valuelen = valuelen;
 		memcpy(args->value, &name_loc->nameval[args->namelen], valuelen);
 	} else {
-		name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf, args->index);
+		name_rmt = xfs_attr_leaf_name_remote(leaf, args->index);
 		ASSERT(name_rmt->namelen == args->namelen);
 		ASSERT(memcmp(args->name, name_rmt->name, args->namelen) == 0);
 		valuelen = be32_to_cpu(name_rmt->valuelen);
@@ -2143,7 +2143,7 @@
 		 * off for 6.2, should be revisited later.
 		 */
 		if (entry_s->flags & XFS_ATTR_INCOMPLETE) { /* skip partials? */
-			memset(XFS_ATTR_LEAF_NAME(leaf_s, start_s + i), 0, tmp);
+			memset(xfs_attr_leaf_name(leaf_s, start_s + i), 0, tmp);
 			be16_add_cpu(&hdr_s->usedbytes, -tmp);
 			be16_add_cpu(&hdr_s->count, -1);
 			entry_d--;	/* to compensate for ++ in loop hdr */
@@ -2160,11 +2160,11 @@
 			entry_d->flags = entry_s->flags;
 			ASSERT(be16_to_cpu(entry_d->nameidx) + tmp
 							<= XFS_LBSIZE(mp));
-			memmove(XFS_ATTR_LEAF_NAME(leaf_d, desti),
-				XFS_ATTR_LEAF_NAME(leaf_s, start_s + i), tmp);
+			memmove(xfs_attr_leaf_name(leaf_d, desti),
+				xfs_attr_leaf_name(leaf_s, start_s + i), tmp);
 			ASSERT(be16_to_cpu(entry_s->nameidx) + tmp
 							<= XFS_LBSIZE(mp));
-			memset(XFS_ATTR_LEAF_NAME(leaf_s, start_s + i), 0, tmp);
+			memset(xfs_attr_leaf_name(leaf_s, start_s + i), 0, tmp);
 			be16_add_cpu(&hdr_s->usedbytes, -tmp);
 			be16_add_cpu(&hdr_d->usedbytes, tmp);
 			be16_add_cpu(&hdr_s->count, -1);
@@ -2276,12 +2276,12 @@
 
 	ASSERT(be16_to_cpu(leaf->hdr.info.magic) == XFS_ATTR_LEAF_MAGIC);
 	if (leaf->entries[index].flags & XFS_ATTR_LOCAL) {
-		name_loc = XFS_ATTR_LEAF_NAME_LOCAL(leaf, index);
-		size = XFS_ATTR_LEAF_ENTSIZE_LOCAL(name_loc->namelen,
+		name_loc = xfs_attr_leaf_name_local(leaf, index);
+		size = xfs_attr_leaf_entsize_local(name_loc->namelen,
 						   be16_to_cpu(name_loc->valuelen));
 	} else {
-		name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf, index);
-		size = XFS_ATTR_LEAF_ENTSIZE_REMOTE(name_rmt->namelen);
+		name_rmt = xfs_attr_leaf_name_remote(leaf, index);
+		size = xfs_attr_leaf_entsize_remote(name_rmt->namelen);
 	}
 	return(size);
 }
@@ -2297,13 +2297,13 @@
 {
 	int size;
 
-	size = XFS_ATTR_LEAF_ENTSIZE_LOCAL(namelen, valuelen);
-	if (size < XFS_ATTR_LEAF_ENTSIZE_LOCAL_MAX(blocksize)) {
+	size = xfs_attr_leaf_entsize_local(namelen, valuelen);
+	if (size < xfs_attr_leaf_entsize_local_max(blocksize)) {
 		if (local) {
 			*local = 1;
 		}
 	} else {
-		size = XFS_ATTR_LEAF_ENTSIZE_REMOTE(namelen);
+		size = xfs_attr_leaf_entsize_remote(namelen);
 		if (local) {
 			*local = 0;
 		}
@@ -2372,7 +2372,7 @@
 
 		if (entry->flags & XFS_ATTR_LOCAL) {
 			xfs_attr_leaf_name_local_t *name_loc =
-				XFS_ATTR_LEAF_NAME_LOCAL(leaf, i);
+				xfs_attr_leaf_name_local(leaf, i);
 
 			retval = context->put_listent(context,
 						entry->flags,
@@ -2384,7 +2384,7 @@
 				return retval;
 		} else {
 			xfs_attr_leaf_name_remote_t *name_rmt =
-				XFS_ATTR_LEAF_NAME_REMOTE(leaf, i);
+				xfs_attr_leaf_name_remote(leaf, i);
 
 			int valuelen = be32_to_cpu(name_rmt->valuelen);
 
@@ -2468,11 +2468,11 @@
 
 #ifdef DEBUG
 	if (entry->flags & XFS_ATTR_LOCAL) {
-		name_loc = XFS_ATTR_LEAF_NAME_LOCAL(leaf, args->index);
+		name_loc = xfs_attr_leaf_name_local(leaf, args->index);
 		namelen = name_loc->namelen;
 		name = (char *)name_loc->nameval;
 	} else {
-		name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf, args->index);
+		name_rmt = xfs_attr_leaf_name_remote(leaf, args->index);
 		namelen = name_rmt->namelen;
 		name = (char *)name_rmt->name;
 	}
@@ -2487,7 +2487,7 @@
 
 	if (args->rmtblkno) {
 		ASSERT((entry->flags & XFS_ATTR_LOCAL) == 0);
-		name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf, args->index);
+		name_rmt = xfs_attr_leaf_name_remote(leaf, args->index);
 		name_rmt->valueblk = cpu_to_be32(args->rmtblkno);
 		name_rmt->valuelen = cpu_to_be32(args->valuelen);
 		xfs_da_log_buf(args->trans, bp,
@@ -2534,7 +2534,7 @@
 	xfs_da_log_buf(args->trans, bp,
 			XFS_DA_LOGRANGE(leaf, entry, sizeof(*entry)));
 	if ((entry->flags & XFS_ATTR_LOCAL) == 0) {
-		name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf, args->index);
+		name_rmt = xfs_attr_leaf_name_remote(leaf, args->index);
 		name_rmt->valueblk = 0;
 		name_rmt->valuelen = 0;
 		xfs_da_log_buf(args->trans, bp,
@@ -2607,20 +2607,20 @@
 
 #ifdef DEBUG
 	if (entry1->flags & XFS_ATTR_LOCAL) {
-		name_loc = XFS_ATTR_LEAF_NAME_LOCAL(leaf1, args->index);
+		name_loc = xfs_attr_leaf_name_local(leaf1, args->index);
 		namelen1 = name_loc->namelen;
 		name1 = (char *)name_loc->nameval;
 	} else {
-		name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf1, args->index);
+		name_rmt = xfs_attr_leaf_name_remote(leaf1, args->index);
 		namelen1 = name_rmt->namelen;
 		name1 = (char *)name_rmt->name;
 	}
 	if (entry2->flags & XFS_ATTR_LOCAL) {
-		name_loc = XFS_ATTR_LEAF_NAME_LOCAL(leaf2, args->index2);
+		name_loc = xfs_attr_leaf_name_local(leaf2, args->index2);
 		namelen2 = name_loc->namelen;
 		name2 = (char *)name_loc->nameval;
 	} else {
-		name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf2, args->index2);
+		name_rmt = xfs_attr_leaf_name_remote(leaf2, args->index2);
 		namelen2 = name_rmt->namelen;
 		name2 = (char *)name_rmt->name;
 	}
@@ -2637,7 +2637,7 @@
 			  XFS_DA_LOGRANGE(leaf1, entry1, sizeof(*entry1)));
 	if (args->rmtblkno) {
 		ASSERT((entry1->flags & XFS_ATTR_LOCAL) == 0);
-		name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf1, args->index);
+		name_rmt = xfs_attr_leaf_name_remote(leaf1, args->index);
 		name_rmt->valueblk = cpu_to_be32(args->rmtblkno);
 		name_rmt->valuelen = cpu_to_be32(args->valuelen);
 		xfs_da_log_buf(args->trans, bp1,
@@ -2648,7 +2648,7 @@
 	xfs_da_log_buf(args->trans, bp2,
 			  XFS_DA_LOGRANGE(leaf2, entry2, sizeof(*entry2)));
 	if ((entry2->flags & XFS_ATTR_LOCAL) == 0) {
-		name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf2, args->index2);
+		name_rmt = xfs_attr_leaf_name_remote(leaf2, args->index2);
 		name_rmt->valueblk = 0;
 		name_rmt->valuelen = 0;
 		xfs_da_log_buf(args->trans, bp2,
@@ -2855,7 +2855,7 @@
 	for (i = 0; i < be16_to_cpu(leaf->hdr.count); entry++, i++) {
 		if (be16_to_cpu(entry->nameidx) &&
 		    ((entry->flags & XFS_ATTR_LOCAL) == 0)) {
-			name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf, i);
+			name_rmt = xfs_attr_leaf_name_remote(leaf, i);
 			if (name_rmt->valueblk)
 				count++;
 		}
@@ -2883,7 +2883,7 @@
 	for (i = 0; i < be16_to_cpu(leaf->hdr.count); entry++, i++) {
 		if (be16_to_cpu(entry->nameidx) &&
 		    ((entry->flags & XFS_ATTR_LOCAL) == 0)) {
-			name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf, i);
+			name_rmt = xfs_attr_leaf_name_remote(leaf, i);
 			if (name_rmt->valueblk) {
 				lp->valueblk = be32_to_cpu(name_rmt->valueblk);
 				lp->valuelen = XFS_B_TO_FSB(dp->i_mount,
diff --git a/fs/xfs/xfs_attr_leaf.h b/fs/xfs/xfs_attr_leaf.h
index 83e9af4..9c7d22f 100644
--- a/fs/xfs/xfs_attr_leaf.h
+++ b/fs/xfs/xfs_attr_leaf.h
@@ -151,8 +151,6 @@
 /*
  * Cast typed pointers for "local" and "remote" name/value structs.
  */
-#define XFS_ATTR_LEAF_NAME_REMOTE(leafp,idx)	\
-	xfs_attr_leaf_name_remote(leafp,idx)
 static inline xfs_attr_leaf_name_remote_t *
 xfs_attr_leaf_name_remote(xfs_attr_leafblock_t *leafp, int idx)
 {
@@ -160,8 +158,6 @@
 		&((char *)leafp)[be16_to_cpu(leafp->entries[idx].nameidx)];
 }
 
-#define XFS_ATTR_LEAF_NAME_LOCAL(leafp,idx)	\
-	xfs_attr_leaf_name_local(leafp,idx)
 static inline xfs_attr_leaf_name_local_t *
 xfs_attr_leaf_name_local(xfs_attr_leafblock_t *leafp, int idx)
 {
@@ -169,8 +165,6 @@
 		&((char *)leafp)[be16_to_cpu(leafp->entries[idx].nameidx)];
 }
 
-#define XFS_ATTR_LEAF_NAME(leafp,idx)		\
-	xfs_attr_leaf_name(leafp,idx)
 static inline char *xfs_attr_leaf_name(xfs_attr_leafblock_t *leafp, int idx)
 {
 	return &((char *)leafp)[be16_to_cpu(leafp->entries[idx].nameidx)];
@@ -181,24 +175,18 @@
  * a "local" name/value structure, a "remote" name/value structure, and
  * a pointer which might be either.
  */
-#define XFS_ATTR_LEAF_ENTSIZE_REMOTE(nlen)	\
-	xfs_attr_leaf_entsize_remote(nlen)
 static inline int xfs_attr_leaf_entsize_remote(int nlen)
 {
 	return ((uint)sizeof(xfs_attr_leaf_name_remote_t) - 1 + (nlen) + \
 		XFS_ATTR_LEAF_NAME_ALIGN - 1) & ~(XFS_ATTR_LEAF_NAME_ALIGN - 1);
 }
 
-#define XFS_ATTR_LEAF_ENTSIZE_LOCAL(nlen,vlen)	\
-	xfs_attr_leaf_entsize_local(nlen,vlen)
 static inline int xfs_attr_leaf_entsize_local(int nlen, int vlen)
 {
 	return ((uint)sizeof(xfs_attr_leaf_name_local_t) - 1 + (nlen) + (vlen) +
 		XFS_ATTR_LEAF_NAME_ALIGN - 1) & ~(XFS_ATTR_LEAF_NAME_ALIGN - 1);
 }
 
-#define XFS_ATTR_LEAF_ENTSIZE_LOCAL_MAX(bsize)	\
-	xfs_attr_leaf_entsize_local_max(bsize)
 static inline int xfs_attr_leaf_entsize_local_max(int bsize)
 {
 	return (((bsize) >> 1) + ((bsize) >> 2));
diff --git a/fs/xfs/xfs_bit.h b/fs/xfs/xfs_bit.h
index bca7b24..f1e3c90 100644
--- a/fs/xfs/xfs_bit.h
+++ b/fs/xfs/xfs_bit.h
@@ -23,24 +23,16 @@
  */
 
 /*
- * masks with n high/low bits set, 32-bit values & 64-bit values
+ * masks with n high/low bits set, 64-bit values
  */
-#define	XFS_MASK32HI(n)		xfs_mask32hi(n)
-static inline __uint32_t xfs_mask32hi(int n)
-{
-	return (__uint32_t)-1 << (32 - (n));
-}
-#define	XFS_MASK64HI(n)		xfs_mask64hi(n)
 static inline __uint64_t xfs_mask64hi(int n)
 {
 	return (__uint64_t)-1 << (64 - (n));
 }
-#define	XFS_MASK32LO(n)		xfs_mask32lo(n)
 static inline __uint32_t xfs_mask32lo(int n)
 {
 	return ((__uint32_t)1 << (n)) - 1;
 }
-#define	XFS_MASK64LO(n)		xfs_mask64lo(n)
 static inline __uint64_t xfs_mask64lo(int n)
 {
 	return ((__uint64_t)1 << (n)) - 1;
diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c
index 138308e..c852cd6 100644
--- a/fs/xfs/xfs_bmap.c
+++ b/fs/xfs/xfs_bmap.c
@@ -595,9 +595,9 @@
 		xfs_iext_insert(ifp, 0, 1, new);
 		ASSERT(cur == NULL);
 		ifp->if_lastex = 0;
-		if (!ISNULLSTARTBLOCK(new->br_startblock)) {
+		if (!isnullstartblock(new->br_startblock)) {
 			XFS_IFORK_NEXT_SET(ip, whichfork, 1);
-			logflags = XFS_ILOG_CORE | XFS_ILOG_FEXT(whichfork);
+			logflags = XFS_ILOG_CORE | xfs_ilog_fext(whichfork);
 		} else
 			logflags = 0;
 		/* DELTA: single new extent */
@@ -613,7 +613,7 @@
 	/*
 	 * Any kind of new delayed allocation goes here.
 	 */
-	else if (ISNULLSTARTBLOCK(new->br_startblock)) {
+	else if (isnullstartblock(new->br_startblock)) {
 		if (cur)
 			ASSERT((cur->bc_private.b.flags &
 				XFS_BTCUR_BPRV_WASDEL) == 0);
@@ -644,11 +644,11 @@
 		 * in a delayed or unwritten allocation with a real one, or
 		 * converting real back to unwritten.
 		 */
-		if (!ISNULLSTARTBLOCK(new->br_startblock) &&
+		if (!isnullstartblock(new->br_startblock) &&
 		    new->br_startoff + new->br_blockcount > prev.br_startoff) {
 			if (prev.br_state != XFS_EXT_UNWRITTEN &&
-			    ISNULLSTARTBLOCK(prev.br_startblock)) {
-				da_old = STARTBLOCKVAL(prev.br_startblock);
+			    isnullstartblock(prev.br_startblock)) {
+				da_old = startblockval(prev.br_startblock);
 				if (cur)
 					ASSERT(cur->bc_private.b.flags &
 						XFS_BTCUR_BPRV_WASDEL);
@@ -803,7 +803,7 @@
 	 */
 	if (STATE_SET_TEST(LEFT_VALID, idx > 0)) {
 		xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx - 1), &LEFT);
-		STATE_SET(LEFT_DELAY, ISNULLSTARTBLOCK(LEFT.br_startblock));
+		STATE_SET(LEFT_DELAY, isnullstartblock(LEFT.br_startblock));
 	}
 	STATE_SET(LEFT_CONTIG,
 		STATE_TEST(LEFT_VALID) && !STATE_TEST(LEFT_DELAY) &&
@@ -820,7 +820,7 @@
 			idx <
 			ip->i_df.if_bytes / (uint)sizeof(xfs_bmbt_rec_t) - 1)) {
 		xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx + 1), &RIGHT);
-		STATE_SET(RIGHT_DELAY, ISNULLSTARTBLOCK(RIGHT.br_startblock));
+		STATE_SET(RIGHT_DELAY, isnullstartblock(RIGHT.br_startblock));
 	}
 	STATE_SET(RIGHT_CONTIG,
 		STATE_TEST(RIGHT_VALID) && !STATE_TEST(RIGHT_DELAY) &&
@@ -1019,8 +1019,8 @@
 				goto done;
 		}
 		temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp),
-			STARTBLOCKVAL(PREV.br_startblock));
-		xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp));
+			startblockval(PREV.br_startblock));
+		xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
 		XFS_BMAP_TRACE_POST_UPDATE("LF|LC", ip, idx, XFS_DATA_FORK);
 		*dnew = temp;
 		/* DELTA: The boundary between two in-core extents moved. */
@@ -1067,10 +1067,10 @@
 				goto done;
 		}
 		temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp),
-			STARTBLOCKVAL(PREV.br_startblock) -
+			startblockval(PREV.br_startblock) -
 			(cur ? cur->bc_private.b.allocated : 0));
 		ep = xfs_iext_get_ext(ifp, idx + 1);
-		xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp));
+		xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
 		XFS_BMAP_TRACE_POST_UPDATE("LF", ip, idx + 1, XFS_DATA_FORK);
 		*dnew = temp;
 		/* DELTA: One in-core extent is split in two. */
@@ -1110,8 +1110,8 @@
 				goto done;
 		}
 		temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp),
-			STARTBLOCKVAL(PREV.br_startblock));
-		xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp));
+			startblockval(PREV.br_startblock));
+		xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
 		XFS_BMAP_TRACE_POST_UPDATE("RF|RC", ip, idx, XFS_DATA_FORK);
 		*dnew = temp;
 		/* DELTA: The boundary between two in-core extents moved. */
@@ -1157,10 +1157,10 @@
 				goto done;
 		}
 		temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp),
-			STARTBLOCKVAL(PREV.br_startblock) -
+			startblockval(PREV.br_startblock) -
 			(cur ? cur->bc_private.b.allocated : 0));
 		ep = xfs_iext_get_ext(ifp, idx);
-		xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp));
+		xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
 		XFS_BMAP_TRACE_POST_UPDATE("RF", ip, idx, XFS_DATA_FORK);
 		*dnew = temp;
 		/* DELTA: One in-core extent is split in two. */
@@ -1213,7 +1213,7 @@
 		}
 		temp = xfs_bmap_worst_indlen(ip, temp);
 		temp2 = xfs_bmap_worst_indlen(ip, temp2);
-		diff = (int)(temp + temp2 - STARTBLOCKVAL(PREV.br_startblock) -
+		diff = (int)(temp + temp2 - startblockval(PREV.br_startblock) -
 			(cur ? cur->bc_private.b.allocated : 0));
 		if (diff > 0 &&
 		    xfs_mod_incore_sb(ip->i_mount, XFS_SBS_FDBLOCKS, -((int64_t)diff), rsvd)) {
@@ -1241,11 +1241,11 @@
 			}
 		}
 		ep = xfs_iext_get_ext(ifp, idx);
-		xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp));
+		xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
 		XFS_BMAP_TRACE_POST_UPDATE("0", ip, idx, XFS_DATA_FORK);
 		XFS_BMAP_TRACE_PRE_UPDATE("0", ip, idx + 2, XFS_DATA_FORK);
 		xfs_bmbt_set_startblock(xfs_iext_get_ext(ifp, idx + 2),
-			NULLSTARTBLOCK((int)temp2));
+			nullstartblock((int)temp2));
 		XFS_BMAP_TRACE_POST_UPDATE("0", ip, idx + 2, XFS_DATA_FORK);
 		*dnew = temp + temp2;
 		/* DELTA: One in-core extent is split in three. */
@@ -1365,7 +1365,7 @@
 	 */
 	if (STATE_SET_TEST(LEFT_VALID, idx > 0)) {
 		xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx - 1), &LEFT);
-		STATE_SET(LEFT_DELAY, ISNULLSTARTBLOCK(LEFT.br_startblock));
+		STATE_SET(LEFT_DELAY, isnullstartblock(LEFT.br_startblock));
 	}
 	STATE_SET(LEFT_CONTIG,
 		STATE_TEST(LEFT_VALID) && !STATE_TEST(LEFT_DELAY) &&
@@ -1382,7 +1382,7 @@
 			idx <
 			ip->i_df.if_bytes / (uint)sizeof(xfs_bmbt_rec_t) - 1)) {
 		xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx + 1), &RIGHT);
-		STATE_SET(RIGHT_DELAY, ISNULLSTARTBLOCK(RIGHT.br_startblock));
+		STATE_SET(RIGHT_DELAY, isnullstartblock(RIGHT.br_startblock));
 	}
 	STATE_SET(RIGHT_CONTIG,
 		STATE_TEST(RIGHT_VALID) && !STATE_TEST(RIGHT_DELAY) &&
@@ -1889,13 +1889,13 @@
 	ifp = XFS_IFORK_PTR(ip, XFS_DATA_FORK);
 	ep = xfs_iext_get_ext(ifp, idx);
 	state = 0;
-	ASSERT(ISNULLSTARTBLOCK(new->br_startblock));
+	ASSERT(isnullstartblock(new->br_startblock));
 	/*
 	 * Check and set flags if this segment has a left neighbor
 	 */
 	if (STATE_SET_TEST(LEFT_VALID, idx > 0)) {
 		xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx - 1), &left);
-		STATE_SET(LEFT_DELAY, ISNULLSTARTBLOCK(left.br_startblock));
+		STATE_SET(LEFT_DELAY, isnullstartblock(left.br_startblock));
 	}
 	/*
 	 * Check and set flags if the current (right) segment exists.
@@ -1905,7 +1905,7 @@
 			   idx <
 			   ip->i_df.if_bytes / (uint)sizeof(xfs_bmbt_rec_t))) {
 		xfs_bmbt_get_all(ep, &right);
-		STATE_SET(RIGHT_DELAY, ISNULLSTARTBLOCK(right.br_startblock));
+		STATE_SET(RIGHT_DELAY, isnullstartblock(right.br_startblock));
 	}
 	/*
 	 * Set contiguity flags on the left and right neighbors.
@@ -1938,12 +1938,12 @@
 		XFS_BMAP_TRACE_PRE_UPDATE("LC|RC", ip, idx - 1,
 			XFS_DATA_FORK);
 		xfs_bmbt_set_blockcount(xfs_iext_get_ext(ifp, idx - 1), temp);
-		oldlen = STARTBLOCKVAL(left.br_startblock) +
-			STARTBLOCKVAL(new->br_startblock) +
-			STARTBLOCKVAL(right.br_startblock);
+		oldlen = startblockval(left.br_startblock) +
+			startblockval(new->br_startblock) +
+			startblockval(right.br_startblock);
 		newlen = xfs_bmap_worst_indlen(ip, temp);
 		xfs_bmbt_set_startblock(xfs_iext_get_ext(ifp, idx - 1),
-			NULLSTARTBLOCK((int)newlen));
+			nullstartblock((int)newlen));
 		XFS_BMAP_TRACE_POST_UPDATE("LC|RC", ip, idx - 1,
 			XFS_DATA_FORK);
 		XFS_BMAP_TRACE_DELETE("LC|RC", ip, idx, 1, XFS_DATA_FORK);
@@ -1964,11 +1964,11 @@
 		XFS_BMAP_TRACE_PRE_UPDATE("LC", ip, idx - 1,
 			XFS_DATA_FORK);
 		xfs_bmbt_set_blockcount(xfs_iext_get_ext(ifp, idx - 1), temp);
-		oldlen = STARTBLOCKVAL(left.br_startblock) +
-			STARTBLOCKVAL(new->br_startblock);
+		oldlen = startblockval(left.br_startblock) +
+			startblockval(new->br_startblock);
 		newlen = xfs_bmap_worst_indlen(ip, temp);
 		xfs_bmbt_set_startblock(xfs_iext_get_ext(ifp, idx - 1),
-			NULLSTARTBLOCK((int)newlen));
+			nullstartblock((int)newlen));
 		XFS_BMAP_TRACE_POST_UPDATE("LC", ip, idx - 1,
 			XFS_DATA_FORK);
 		ip->i_df.if_lastex = idx - 1;
@@ -1985,11 +1985,11 @@
 		 */
 		XFS_BMAP_TRACE_PRE_UPDATE("RC", ip, idx, XFS_DATA_FORK);
 		temp = new->br_blockcount + right.br_blockcount;
-		oldlen = STARTBLOCKVAL(new->br_startblock) +
-			STARTBLOCKVAL(right.br_startblock);
+		oldlen = startblockval(new->br_startblock) +
+			startblockval(right.br_startblock);
 		newlen = xfs_bmap_worst_indlen(ip, temp);
 		xfs_bmbt_set_allf(ep, new->br_startoff,
-			NULLSTARTBLOCK((int)newlen), temp, right.br_state);
+			nullstartblock((int)newlen), temp, right.br_state);
 		XFS_BMAP_TRACE_POST_UPDATE("RC", ip, idx, XFS_DATA_FORK);
 		ip->i_df.if_lastex = idx;
 		/* DELTA: One in-core extent grew into a hole. */
@@ -2085,7 +2085,7 @@
 	 */
 	if (STATE_SET_TEST(LEFT_VALID, idx > 0)) {
 		xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx - 1), &left);
-		STATE_SET(LEFT_DELAY, ISNULLSTARTBLOCK(left.br_startblock));
+		STATE_SET(LEFT_DELAY, isnullstartblock(left.br_startblock));
 	}
 	/*
 	 * Check and set flags if this segment has a current value.
@@ -2095,7 +2095,7 @@
 			   idx <
 			   ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t))) {
 		xfs_bmbt_get_all(ep, &right);
-		STATE_SET(RIGHT_DELAY, ISNULLSTARTBLOCK(right.br_startblock));
+		STATE_SET(RIGHT_DELAY, isnullstartblock(right.br_startblock));
 	}
 	/*
 	 * We're inserting a real allocation between "left" and "right".
@@ -2143,7 +2143,7 @@
 		XFS_IFORK_NEXT_SET(ip, whichfork,
 			XFS_IFORK_NEXTENTS(ip, whichfork) - 1);
 		if (cur == NULL) {
-			rval = XFS_ILOG_CORE | XFS_ILOG_FEXT(whichfork);
+			rval = XFS_ILOG_CORE | xfs_ilog_fext(whichfork);
 		} else {
 			rval = XFS_ILOG_CORE;
 			if ((error = xfs_bmbt_lookup_eq(cur,
@@ -2185,7 +2185,7 @@
 		XFS_BMAP_TRACE_POST_UPDATE("LC", ip, idx - 1, whichfork);
 		ifp->if_lastex = idx - 1;
 		if (cur == NULL) {
-			rval = XFS_ILOG_FEXT(whichfork);
+			rval = xfs_ilog_fext(whichfork);
 		} else {
 			rval = 0;
 			if ((error = xfs_bmbt_lookup_eq(cur,
@@ -2220,7 +2220,7 @@
 		XFS_BMAP_TRACE_POST_UPDATE("RC", ip, idx, whichfork);
 		ifp->if_lastex = idx;
 		if (cur == NULL) {
-			rval = XFS_ILOG_FEXT(whichfork);
+			rval = xfs_ilog_fext(whichfork);
 		} else {
 			rval = 0;
 			if ((error = xfs_bmbt_lookup_eq(cur,
@@ -2254,7 +2254,7 @@
 		XFS_IFORK_NEXT_SET(ip, whichfork,
 			XFS_IFORK_NEXTENTS(ip, whichfork) + 1);
 		if (cur == NULL) {
-			rval = XFS_ILOG_CORE | XFS_ILOG_FEXT(whichfork);
+			rval = XFS_ILOG_CORE | xfs_ilog_fext(whichfork);
 		} else {
 			rval = XFS_ILOG_CORE;
 			if ((error = xfs_bmbt_lookup_eq(cur,
@@ -2482,7 +2482,7 @@
 	 * try to use it's last block as our starting point.
 	 */
 	if (ap->eof && ap->prevp->br_startoff != NULLFILEOFF &&
-	    !ISNULLSTARTBLOCK(ap->prevp->br_startblock) &&
+	    !isnullstartblock(ap->prevp->br_startblock) &&
 	    ISVALID(ap->prevp->br_startblock + ap->prevp->br_blockcount,
 		    ap->prevp->br_startblock)) {
 		ap->rval = ap->prevp->br_startblock + ap->prevp->br_blockcount;
@@ -2511,7 +2511,7 @@
 		 * start block based on it.
 		 */
 		if (ap->prevp->br_startoff != NULLFILEOFF &&
-		    !ISNULLSTARTBLOCK(ap->prevp->br_startblock) &&
+		    !isnullstartblock(ap->prevp->br_startblock) &&
 		    (prevbno = ap->prevp->br_startblock +
 			       ap->prevp->br_blockcount) &&
 		    ISVALID(prevbno, ap->prevp->br_startblock)) {
@@ -2552,7 +2552,7 @@
 		 * If there's a following (right) block, select a requested
 		 * start block based on it.
 		 */
-		if (!ISNULLSTARTBLOCK(ap->gotp->br_startblock)) {
+		if (!isnullstartblock(ap->gotp->br_startblock)) {
 			/*
 			 * Calculate gap to start of next block.
 			 */
@@ -3082,7 +3082,7 @@
 	ASSERT(ifp->if_broot == NULL);
 	ASSERT((ifp->if_flags & XFS_IFBROOT) == 0);
 	XFS_IFORK_FMT_SET(ip, whichfork, XFS_DINODE_FMT_EXTENTS);
-	*logflagsp = XFS_ILOG_CORE | XFS_ILOG_FEXT(whichfork);
+	*logflagsp = XFS_ILOG_CORE | xfs_ilog_fext(whichfork);
 	return 0;
 }
 
@@ -3136,8 +3136,8 @@
 	del_endoff = del->br_startoff + del->br_blockcount;
 	got_endoff = got.br_startoff + got.br_blockcount;
 	ASSERT(got_endoff >= del_endoff);
-	delay = ISNULLSTARTBLOCK(got.br_startblock);
-	ASSERT(ISNULLSTARTBLOCK(del->br_startblock) == delay);
+	delay = isnullstartblock(got.br_startblock);
+	ASSERT(isnullstartblock(del->br_startblock) == delay);
 	flags = 0;
 	qfield = 0;
 	error = 0;
@@ -3189,7 +3189,7 @@
 		}
 		da_old = da_new = 0;
 	} else {
-		da_old = STARTBLOCKVAL(got.br_startblock);
+		da_old = startblockval(got.br_startblock);
 		da_new = 0;
 		nblks = 0;
 		do_fx = 0;
@@ -3213,7 +3213,7 @@
 			XFS_IFORK_NEXTENTS(ip, whichfork) - 1);
 		flags |= XFS_ILOG_CORE;
 		if (!cur) {
-			flags |= XFS_ILOG_FEXT(whichfork);
+			flags |= xfs_ilog_fext(whichfork);
 			break;
 		}
 		if ((error = xfs_btree_delete(cur, &i)))
@@ -3233,7 +3233,7 @@
 		if (delay) {
 			temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp),
 				da_old);
-			xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp));
+			xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
 			XFS_BMAP_TRACE_POST_UPDATE("2", ip, idx,
 				whichfork);
 			da_new = temp;
@@ -3242,7 +3242,7 @@
 		xfs_bmbt_set_startblock(ep, del_endblock);
 		XFS_BMAP_TRACE_POST_UPDATE("2", ip, idx, whichfork);
 		if (!cur) {
-			flags |= XFS_ILOG_FEXT(whichfork);
+			flags |= xfs_ilog_fext(whichfork);
 			break;
 		}
 		if ((error = xfs_bmbt_update(cur, del_endoff, del_endblock,
@@ -3262,7 +3262,7 @@
 		if (delay) {
 			temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp),
 				da_old);
-			xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp));
+			xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
 			XFS_BMAP_TRACE_POST_UPDATE("1", ip, idx,
 				whichfork);
 			da_new = temp;
@@ -3270,7 +3270,7 @@
 		}
 		XFS_BMAP_TRACE_POST_UPDATE("1", ip, idx, whichfork);
 		if (!cur) {
-			flags |= XFS_ILOG_FEXT(whichfork);
+			flags |= xfs_ilog_fext(whichfork);
 			break;
 		}
 		if ((error = xfs_bmbt_update(cur, got.br_startoff,
@@ -3345,22 +3345,22 @@
 				}
 				XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			} else
-				flags |= XFS_ILOG_FEXT(whichfork);
+				flags |= xfs_ilog_fext(whichfork);
 			XFS_IFORK_NEXT_SET(ip, whichfork,
 				XFS_IFORK_NEXTENTS(ip, whichfork) + 1);
 		} else {
 			ASSERT(whichfork == XFS_DATA_FORK);
 			temp = xfs_bmap_worst_indlen(ip, temp);
-			xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp));
+			xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
 			temp2 = xfs_bmap_worst_indlen(ip, temp2);
-			new.br_startblock = NULLSTARTBLOCK((int)temp2);
+			new.br_startblock = nullstartblock((int)temp2);
 			da_new = temp + temp2;
 			while (da_new > da_old) {
 				if (temp) {
 					temp--;
 					da_new--;
 					xfs_bmbt_set_startblock(ep,
-						NULLSTARTBLOCK((int)temp));
+						nullstartblock((int)temp));
 				}
 				if (da_new == da_old)
 					break;
@@ -3368,7 +3368,7 @@
 					temp2--;
 					da_new--;
 					new.br_startblock =
-						NULLSTARTBLOCK((int)temp2);
+						nullstartblock((int)temp2);
 				}
 			}
 		}
@@ -3545,7 +3545,7 @@
 	nextents = ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t);
 	for (cnt = i = 0; i < nextents; i++) {
 		ep = xfs_iext_get_ext(ifp, i);
-		if (!ISNULLSTARTBLOCK(xfs_bmbt_get_startblock(ep))) {
+		if (!isnullstartblock(xfs_bmbt_get_startblock(ep))) {
 			arp->l0 = cpu_to_be64(ep->l0);
 			arp->l1 = cpu_to_be64(ep->l1);
 			arp++; cnt++;
@@ -3572,7 +3572,7 @@
 	xfs_btree_log_recs(cur, abp, 1, be16_to_cpu(ablock->bb_numrecs));
 	ASSERT(*curp == NULL);
 	*curp = cur;
-	*logflagsp = XFS_ILOG_CORE | XFS_ILOG_FBROOT(whichfork);
+	*logflagsp = XFS_ILOG_CORE | xfs_ilog_fbroot(whichfork);
 	return 0;
 }
 
@@ -3676,7 +3676,7 @@
 		ip->i_d.di_nblocks = 1;
 		XFS_TRANS_MOD_DQUOT_BYINO(args.mp, tp, ip,
 			XFS_TRANS_DQ_BCOUNT, 1L);
-		flags |= XFS_ILOG_FEXT(whichfork);
+		flags |= xfs_ilog_fext(whichfork);
 	} else {
 		ASSERT(XFS_IFORK_NEXTENTS(ip, whichfork) == 0);
 		xfs_bmap_forkoff_reset(ip->i_mount, ip, whichfork);
@@ -4082,7 +4082,7 @@
 		XFS_IFORK_ASIZE(ip) / (uint)sizeof(xfs_bmbt_rec_t);
 	ip->i_afp->if_flags = XFS_IFEXTENTS;
 	logflags = 0;
-	XFS_BMAP_INIT(&flist, &firstblock);
+	xfs_bmap_init(&flist, &firstblock);
 	switch (ip->i_d.di_format) {
 	case XFS_DINODE_FMT_LOCAL:
 		error = xfs_bmap_add_attrfork_local(tp, ip, &firstblock, &flist,
@@ -4162,7 +4162,7 @@
 	ASSERT(bno != NULLFSBLOCK);
 	ASSERT(len > 0);
 	ASSERT(len <= MAXEXTLEN);
-	ASSERT(!ISNULLSTARTBLOCK(bno));
+	ASSERT(!isnullstartblock(bno));
 	agno = XFS_FSB_TO_AGNO(mp, bno);
 	agbno = XFS_FSB_TO_AGBNO(mp, bno);
 	ASSERT(agno < mp->m_sb.sb_agcount);
@@ -4909,7 +4909,7 @@
 			got.br_startoff = end;
 		inhole = eof || got.br_startoff > bno;
 		wasdelay = wr && !inhole && !(flags & XFS_BMAPI_DELAY) &&
-			ISNULLSTARTBLOCK(got.br_startblock);
+			isnullstartblock(got.br_startblock);
 		/*
 		 * First, deal with the hole before the allocated space
 		 * that we found, if any.
@@ -5028,7 +5028,7 @@
 				}
 
 				ip->i_delayed_blks += alen;
-				abno = NULLSTARTBLOCK(indlen);
+				abno = nullstartblock(indlen);
 			} else {
 				/*
 				 * If first time, allocate and fill in
@@ -5144,8 +5144,8 @@
 				aoff + alen);
 #ifdef DEBUG
 			if (flags & XFS_BMAPI_DELAY) {
-				ASSERT(ISNULLSTARTBLOCK(got.br_startblock));
-				ASSERT(STARTBLOCKVAL(got.br_startblock) > 0);
+				ASSERT(isnullstartblock(got.br_startblock));
+				ASSERT(startblockval(got.br_startblock) > 0);
 			}
 			ASSERT(got.br_state == XFS_EXT_NORM ||
 			       got.br_state == XFS_EXT_UNWRITTEN);
@@ -5179,7 +5179,7 @@
 			ASSERT((bno >= obno) || (n == 0));
 			ASSERT(bno < end);
 			mval->br_startoff = bno;
-			if (ISNULLSTARTBLOCK(got.br_startblock)) {
+			if (isnullstartblock(got.br_startblock)) {
 				ASSERT(!wr || (flags & XFS_BMAPI_DELAY));
 				mval->br_startblock = DELAYSTARTBLOCK;
 			} else
@@ -5201,7 +5201,7 @@
 			ASSERT(mval->br_blockcount <= len);
 		} else {
 			*mval = got;
-			if (ISNULLSTARTBLOCK(mval->br_startblock)) {
+			if (isnullstartblock(mval->br_startblock)) {
 				ASSERT(!wr || (flags & XFS_BMAPI_DELAY));
 				mval->br_startblock = DELAYSTARTBLOCK;
 			}
@@ -5329,12 +5329,12 @@
 	 * Log everything.  Do this after conversion, there's no point in
 	 * logging the extent records if we've converted to btree format.
 	 */
-	if ((logflags & XFS_ILOG_FEXT(whichfork)) &&
+	if ((logflags & xfs_ilog_fext(whichfork)) &&
 	    XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_EXTENTS)
-		logflags &= ~XFS_ILOG_FEXT(whichfork);
-	else if ((logflags & XFS_ILOG_FBROOT(whichfork)) &&
+		logflags &= ~xfs_ilog_fext(whichfork);
+	else if ((logflags & xfs_ilog_fbroot(whichfork)) &&
 		 XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_BTREE)
-		logflags &= ~XFS_ILOG_FBROOT(whichfork);
+		logflags &= ~xfs_ilog_fbroot(whichfork);
 	/*
 	 * Log whatever the flags say, even if error.  Otherwise we might miss
 	 * detecting a case where the data is changed, there's an error,
@@ -5411,7 +5411,7 @@
 		*fsb = NULLFSBLOCK;
 		return 0;
 	}
-	ASSERT(!ISNULLSTARTBLOCK(got.br_startblock));
+	ASSERT(!isnullstartblock(got.br_startblock));
 	ASSERT(bno < got.br_startoff + got.br_blockcount);
 	*fsb = got.br_startblock + (bno - got.br_startoff);
 	ifp->if_lastex = lastx;
@@ -5543,7 +5543,7 @@
 		 */
 		ASSERT(ep != NULL);
 		del = got;
-		wasdel = ISNULLSTARTBLOCK(del.br_startblock);
+		wasdel = isnullstartblock(del.br_startblock);
 		if (got.br_startoff < start) {
 			del.br_startoff = start;
 			del.br_blockcount -= start - got.br_startoff;
@@ -5638,7 +5638,7 @@
 				xfs_bmbt_get_all(xfs_iext_get_ext(ifp,
 						lastx - 1), &prev);
 				ASSERT(prev.br_state == XFS_EXT_NORM);
-				ASSERT(!ISNULLSTARTBLOCK(prev.br_startblock));
+				ASSERT(!isnullstartblock(prev.br_startblock));
 				ASSERT(del.br_startblock ==
 				       prev.br_startblock + prev.br_blockcount);
 				if (prev.br_startoff < start) {
@@ -5666,7 +5666,7 @@
 			}
 		}
 		if (wasdel) {
-			ASSERT(STARTBLOCKVAL(del.br_startblock) > 0);
+			ASSERT(startblockval(del.br_startblock) > 0);
 			/* Update realtime/data freespace, unreserve quota */
 			if (isrt) {
 				xfs_filblks_t rtexts;
@@ -5782,12 +5782,12 @@
 	 * Log everything.  Do this after conversion, there's no point in
 	 * logging the extent records if we've converted to btree format.
 	 */
-	if ((logflags & XFS_ILOG_FEXT(whichfork)) &&
+	if ((logflags & xfs_ilog_fext(whichfork)) &&
 	    XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_EXTENTS)
-		logflags &= ~XFS_ILOG_FEXT(whichfork);
-	else if ((logflags & XFS_ILOG_FBROOT(whichfork)) &&
+		logflags &= ~xfs_ilog_fext(whichfork);
+	else if ((logflags & xfs_ilog_fbroot(whichfork)) &&
 		 XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_BTREE)
-		logflags &= ~XFS_ILOG_FBROOT(whichfork);
+		logflags &= ~xfs_ilog_fbroot(whichfork);
 	/*
 	 * Log inode even in the error case, if the transaction
 	 * is dirty we'll need to shut down the filesystem.
@@ -5838,7 +5838,7 @@
 		if (startblock == DELAYSTARTBLOCK)
 			out->bmv_block = -2;
 		else
-			out->bmv_block = XFS_FSB_TO_DB(ip, startblock);
+			out->bmv_block = xfs_fsb_to_db(ip, startblock);
 		fileblock = XFS_BB_TO_FSB(ip->i_mount, out->bmv_offset);
 		ifp = XFS_IFORK_PTR(ip, XFS_DATA_FORK);
 		if (xfs_iext_bno_to_ext(ifp, fileblock, &lastx) &&
@@ -5979,7 +5979,7 @@
 	if (nex > XFS_IFORK_NEXTENTS(ip, whichfork) * 2 + 1)
 		nex = XFS_IFORK_NEXTENTS(ip, whichfork) * 2 + 1;
 
-	bmapi_flags = XFS_BMAPI_AFLAG(whichfork) |
+	bmapi_flags = xfs_bmapi_aflag(whichfork) |
 			((iflags & BMV_IF_PREALLOC) ? 0 : XFS_BMAPI_IGSTATE);
 
 	/*
@@ -6098,7 +6098,7 @@
 	 */
 	*aeof = (off >= s.br_startoff &&
 		 off < s.br_startoff + s.br_blockcount &&
-		 ISNULLSTARTBLOCK(s.br_startblock)) ||
+		 isnullstartblock(s.br_startblock)) ||
 		off >= s.br_startoff + s.br_blockcount;
 	return 0;
 }
diff --git a/fs/xfs/xfs_bmap.h b/fs/xfs/xfs_bmap.h
index 284571c..be2979d 100644
--- a/fs/xfs/xfs_bmap.h
+++ b/fs/xfs/xfs_bmap.h
@@ -95,7 +95,6 @@
 					/* need write cache flushing and no */
 					/* additional allocation alignments */
 
-#define	XFS_BMAPI_AFLAG(w)	xfs_bmapi_aflag(w)
 static inline int xfs_bmapi_aflag(int w)
 {
 	return (w == XFS_ATTR_FORK ? XFS_BMAPI_ATTRFORK : 0);
@@ -107,7 +106,6 @@
 #define	DELAYSTARTBLOCK		((xfs_fsblock_t)-1LL)
 #define	HOLESTARTBLOCK		((xfs_fsblock_t)-2LL)
 
-#define	XFS_BMAP_INIT(flp,fbp)	xfs_bmap_init(flp,fbp)
 static inline void xfs_bmap_init(xfs_bmap_free_t *flp, xfs_fsblock_t *fbp)
 {
 	((flp)->xbf_first = NULL, (flp)->xbf_count = 0, \
diff --git a/fs/xfs/xfs_bmap_btree.c b/fs/xfs/xfs_bmap_btree.c
index 8f1ec73..0760d352 100644
--- a/fs/xfs/xfs_bmap_btree.c
+++ b/fs/xfs/xfs_bmap_btree.c
@@ -110,25 +110,25 @@
 
 	ext_flag = (int)(l0 >> (64 - BMBT_EXNTFLAG_BITLEN));
 	s->br_startoff = ((xfs_fileoff_t)l0 &
-			   XFS_MASK64LO(64 - BMBT_EXNTFLAG_BITLEN)) >> 9;
+			   xfs_mask64lo(64 - BMBT_EXNTFLAG_BITLEN)) >> 9;
 #if XFS_BIG_BLKNOS
-	s->br_startblock = (((xfs_fsblock_t)l0 & XFS_MASK64LO(9)) << 43) |
+	s->br_startblock = (((xfs_fsblock_t)l0 & xfs_mask64lo(9)) << 43) |
 			   (((xfs_fsblock_t)l1) >> 21);
 #else
 #ifdef DEBUG
 	{
 		xfs_dfsbno_t	b;
 
-		b = (((xfs_dfsbno_t)l0 & XFS_MASK64LO(9)) << 43) |
+		b = (((xfs_dfsbno_t)l0 & xfs_mask64lo(9)) << 43) |
 		    (((xfs_dfsbno_t)l1) >> 21);
-		ASSERT((b >> 32) == 0 || ISNULLDSTARTBLOCK(b));
+		ASSERT((b >> 32) == 0 || isnulldstartblock(b));
 		s->br_startblock = (xfs_fsblock_t)b;
 	}
 #else	/* !DEBUG */
 	s->br_startblock = (xfs_fsblock_t)(((xfs_dfsbno_t)l1) >> 21);
 #endif	/* DEBUG */
 #endif	/* XFS_BIG_BLKNOS */
-	s->br_blockcount = (xfs_filblks_t)(l1 & XFS_MASK64LO(21));
+	s->br_blockcount = (xfs_filblks_t)(l1 & xfs_mask64lo(21));
 	/* This is xfs_extent_state() in-line */
 	if (ext_flag) {
 		ASSERT(s->br_blockcount != 0);	/* saved for DMIG */
@@ -153,7 +153,7 @@
 xfs_bmbt_get_blockcount(
 	xfs_bmbt_rec_host_t	*r)
 {
-	return (xfs_filblks_t)(r->l1 & XFS_MASK64LO(21));
+	return (xfs_filblks_t)(r->l1 & xfs_mask64lo(21));
 }
 
 /*
@@ -164,15 +164,15 @@
 	xfs_bmbt_rec_host_t	*r)
 {
 #if XFS_BIG_BLKNOS
-	return (((xfs_fsblock_t)r->l0 & XFS_MASK64LO(9)) << 43) |
+	return (((xfs_fsblock_t)r->l0 & xfs_mask64lo(9)) << 43) |
 	       (((xfs_fsblock_t)r->l1) >> 21);
 #else
 #ifdef DEBUG
 	xfs_dfsbno_t	b;
 
-	b = (((xfs_dfsbno_t)r->l0 & XFS_MASK64LO(9)) << 43) |
+	b = (((xfs_dfsbno_t)r->l0 & xfs_mask64lo(9)) << 43) |
 	    (((xfs_dfsbno_t)r->l1) >> 21);
-	ASSERT((b >> 32) == 0 || ISNULLDSTARTBLOCK(b));
+	ASSERT((b >> 32) == 0 || isnulldstartblock(b));
 	return (xfs_fsblock_t)b;
 #else	/* !DEBUG */
 	return (xfs_fsblock_t)(((xfs_dfsbno_t)r->l1) >> 21);
@@ -188,7 +188,7 @@
 	xfs_bmbt_rec_host_t	*r)
 {
 	return ((xfs_fileoff_t)r->l0 &
-		 XFS_MASK64LO(64 - BMBT_EXNTFLAG_BITLEN)) >> 9;
+		 xfs_mask64lo(64 - BMBT_EXNTFLAG_BITLEN)) >> 9;
 }
 
 xfs_exntst_t
@@ -219,7 +219,7 @@
 xfs_bmbt_disk_get_blockcount(
 	xfs_bmbt_rec_t	*r)
 {
-	return (xfs_filblks_t)(be64_to_cpu(r->l1) & XFS_MASK64LO(21));
+	return (xfs_filblks_t)(be64_to_cpu(r->l1) & xfs_mask64lo(21));
 }
 
 /*
@@ -230,7 +230,7 @@
 	xfs_bmbt_rec_t	*r)
 {
 	return ((xfs_fileoff_t)be64_to_cpu(r->l0) &
-		 XFS_MASK64LO(64 - BMBT_EXNTFLAG_BITLEN)) >> 9;
+		 xfs_mask64lo(64 - BMBT_EXNTFLAG_BITLEN)) >> 9;
 }
 
 
@@ -248,33 +248,33 @@
 	int		extent_flag = (state == XFS_EXT_NORM) ? 0 : 1;
 
 	ASSERT(state == XFS_EXT_NORM || state == XFS_EXT_UNWRITTEN);
-	ASSERT((startoff & XFS_MASK64HI(64-BMBT_STARTOFF_BITLEN)) == 0);
-	ASSERT((blockcount & XFS_MASK64HI(64-BMBT_BLOCKCOUNT_BITLEN)) == 0);
+	ASSERT((startoff & xfs_mask64hi(64-BMBT_STARTOFF_BITLEN)) == 0);
+	ASSERT((blockcount & xfs_mask64hi(64-BMBT_BLOCKCOUNT_BITLEN)) == 0);
 
 #if XFS_BIG_BLKNOS
-	ASSERT((startblock & XFS_MASK64HI(64-BMBT_STARTBLOCK_BITLEN)) == 0);
+	ASSERT((startblock & xfs_mask64hi(64-BMBT_STARTBLOCK_BITLEN)) == 0);
 
 	r->l0 = ((xfs_bmbt_rec_base_t)extent_flag << 63) |
 		((xfs_bmbt_rec_base_t)startoff << 9) |
 		((xfs_bmbt_rec_base_t)startblock >> 43);
 	r->l1 = ((xfs_bmbt_rec_base_t)startblock << 21) |
 		((xfs_bmbt_rec_base_t)blockcount &
-		(xfs_bmbt_rec_base_t)XFS_MASK64LO(21));
+		(xfs_bmbt_rec_base_t)xfs_mask64lo(21));
 #else	/* !XFS_BIG_BLKNOS */
-	if (ISNULLSTARTBLOCK(startblock)) {
+	if (isnullstartblock(startblock)) {
 		r->l0 = ((xfs_bmbt_rec_base_t)extent_flag << 63) |
 			((xfs_bmbt_rec_base_t)startoff << 9) |
-			 (xfs_bmbt_rec_base_t)XFS_MASK64LO(9);
-		r->l1 = XFS_MASK64HI(11) |
+			 (xfs_bmbt_rec_base_t)xfs_mask64lo(9);
+		r->l1 = xfs_mask64hi(11) |
 			  ((xfs_bmbt_rec_base_t)startblock << 21) |
 			  ((xfs_bmbt_rec_base_t)blockcount &
-			   (xfs_bmbt_rec_base_t)XFS_MASK64LO(21));
+			   (xfs_bmbt_rec_base_t)xfs_mask64lo(21));
 	} else {
 		r->l0 = ((xfs_bmbt_rec_base_t)extent_flag << 63) |
 			((xfs_bmbt_rec_base_t)startoff << 9);
 		r->l1 = ((xfs_bmbt_rec_base_t)startblock << 21) |
 			 ((xfs_bmbt_rec_base_t)blockcount &
-			 (xfs_bmbt_rec_base_t)XFS_MASK64LO(21));
+			 (xfs_bmbt_rec_base_t)xfs_mask64lo(21));
 	}
 #endif	/* XFS_BIG_BLKNOS */
 }
@@ -306,11 +306,11 @@
 	int			extent_flag = (state == XFS_EXT_NORM) ? 0 : 1;
 
 	ASSERT(state == XFS_EXT_NORM || state == XFS_EXT_UNWRITTEN);
-	ASSERT((startoff & XFS_MASK64HI(64-BMBT_STARTOFF_BITLEN)) == 0);
-	ASSERT((blockcount & XFS_MASK64HI(64-BMBT_BLOCKCOUNT_BITLEN)) == 0);
+	ASSERT((startoff & xfs_mask64hi(64-BMBT_STARTOFF_BITLEN)) == 0);
+	ASSERT((blockcount & xfs_mask64hi(64-BMBT_BLOCKCOUNT_BITLEN)) == 0);
 
 #if XFS_BIG_BLKNOS
-	ASSERT((startblock & XFS_MASK64HI(64-BMBT_STARTBLOCK_BITLEN)) == 0);
+	ASSERT((startblock & xfs_mask64hi(64-BMBT_STARTBLOCK_BITLEN)) == 0);
 
 	r->l0 = cpu_to_be64(
 		((xfs_bmbt_rec_base_t)extent_flag << 63) |
@@ -319,17 +319,17 @@
 	r->l1 = cpu_to_be64(
 		((xfs_bmbt_rec_base_t)startblock << 21) |
 		 ((xfs_bmbt_rec_base_t)blockcount &
-		  (xfs_bmbt_rec_base_t)XFS_MASK64LO(21)));
+		  (xfs_bmbt_rec_base_t)xfs_mask64lo(21)));
 #else	/* !XFS_BIG_BLKNOS */
-	if (ISNULLSTARTBLOCK(startblock)) {
+	if (isnullstartblock(startblock)) {
 		r->l0 = cpu_to_be64(
 			((xfs_bmbt_rec_base_t)extent_flag << 63) |
 			 ((xfs_bmbt_rec_base_t)startoff << 9) |
-			  (xfs_bmbt_rec_base_t)XFS_MASK64LO(9));
-		r->l1 = cpu_to_be64(XFS_MASK64HI(11) |
+			  (xfs_bmbt_rec_base_t)xfs_mask64lo(9));
+		r->l1 = cpu_to_be64(xfs_mask64hi(11) |
 			  ((xfs_bmbt_rec_base_t)startblock << 21) |
 			  ((xfs_bmbt_rec_base_t)blockcount &
-			   (xfs_bmbt_rec_base_t)XFS_MASK64LO(21)));
+			   (xfs_bmbt_rec_base_t)xfs_mask64lo(21)));
 	} else {
 		r->l0 = cpu_to_be64(
 			((xfs_bmbt_rec_base_t)extent_flag << 63) |
@@ -337,7 +337,7 @@
 		r->l1 = cpu_to_be64(
 			((xfs_bmbt_rec_base_t)startblock << 21) |
 			 ((xfs_bmbt_rec_base_t)blockcount &
-			  (xfs_bmbt_rec_base_t)XFS_MASK64LO(21)));
+			  (xfs_bmbt_rec_base_t)xfs_mask64lo(21)));
 	}
 #endif	/* XFS_BIG_BLKNOS */
 }
@@ -362,9 +362,9 @@
 	xfs_bmbt_rec_host_t *r,
 	xfs_filblks_t	v)
 {
-	ASSERT((v & XFS_MASK64HI(43)) == 0);
-	r->l1 = (r->l1 & (xfs_bmbt_rec_base_t)XFS_MASK64HI(43)) |
-		  (xfs_bmbt_rec_base_t)(v & XFS_MASK64LO(21));
+	ASSERT((v & xfs_mask64hi(43)) == 0);
+	r->l1 = (r->l1 & (xfs_bmbt_rec_base_t)xfs_mask64hi(43)) |
+		  (xfs_bmbt_rec_base_t)(v & xfs_mask64lo(21));
 }
 
 /*
@@ -376,21 +376,21 @@
 	xfs_fsblock_t	v)
 {
 #if XFS_BIG_BLKNOS
-	ASSERT((v & XFS_MASK64HI(12)) == 0);
-	r->l0 = (r->l0 & (xfs_bmbt_rec_base_t)XFS_MASK64HI(55)) |
+	ASSERT((v & xfs_mask64hi(12)) == 0);
+	r->l0 = (r->l0 & (xfs_bmbt_rec_base_t)xfs_mask64hi(55)) |
 		  (xfs_bmbt_rec_base_t)(v >> 43);
-	r->l1 = (r->l1 & (xfs_bmbt_rec_base_t)XFS_MASK64LO(21)) |
+	r->l1 = (r->l1 & (xfs_bmbt_rec_base_t)xfs_mask64lo(21)) |
 		  (xfs_bmbt_rec_base_t)(v << 21);
 #else	/* !XFS_BIG_BLKNOS */
-	if (ISNULLSTARTBLOCK(v)) {
-		r->l0 |= (xfs_bmbt_rec_base_t)XFS_MASK64LO(9);
-		r->l1 = (xfs_bmbt_rec_base_t)XFS_MASK64HI(11) |
+	if (isnullstartblock(v)) {
+		r->l0 |= (xfs_bmbt_rec_base_t)xfs_mask64lo(9);
+		r->l1 = (xfs_bmbt_rec_base_t)xfs_mask64hi(11) |
 			  ((xfs_bmbt_rec_base_t)v << 21) |
-			  (r->l1 & (xfs_bmbt_rec_base_t)XFS_MASK64LO(21));
+			  (r->l1 & (xfs_bmbt_rec_base_t)xfs_mask64lo(21));
 	} else {
-		r->l0 &= ~(xfs_bmbt_rec_base_t)XFS_MASK64LO(9);
+		r->l0 &= ~(xfs_bmbt_rec_base_t)xfs_mask64lo(9);
 		r->l1 = ((xfs_bmbt_rec_base_t)v << 21) |
-			  (r->l1 & (xfs_bmbt_rec_base_t)XFS_MASK64LO(21));
+			  (r->l1 & (xfs_bmbt_rec_base_t)xfs_mask64lo(21));
 	}
 #endif	/* XFS_BIG_BLKNOS */
 }
@@ -403,10 +403,10 @@
 	xfs_bmbt_rec_host_t *r,
 	xfs_fileoff_t	v)
 {
-	ASSERT((v & XFS_MASK64HI(9)) == 0);
-	r->l0 = (r->l0 & (xfs_bmbt_rec_base_t) XFS_MASK64HI(1)) |
+	ASSERT((v & xfs_mask64hi(9)) == 0);
+	r->l0 = (r->l0 & (xfs_bmbt_rec_base_t) xfs_mask64hi(1)) |
 		((xfs_bmbt_rec_base_t)v << 9) |
-		  (r->l0 & (xfs_bmbt_rec_base_t)XFS_MASK64LO(9));
+		  (r->l0 & (xfs_bmbt_rec_base_t)xfs_mask64lo(9));
 }
 
 /*
@@ -419,9 +419,9 @@
 {
 	ASSERT(v == XFS_EXT_NORM || v == XFS_EXT_UNWRITTEN);
 	if (v == XFS_EXT_NORM)
-		r->l0 &= XFS_MASK64LO(64 - BMBT_EXNTFLAG_BITLEN);
+		r->l0 &= xfs_mask64lo(64 - BMBT_EXNTFLAG_BITLEN);
 	else
-		r->l0 |= XFS_MASK64HI(BMBT_EXNTFLAG_BITLEN);
+		r->l0 |= xfs_mask64hi(BMBT_EXNTFLAG_BITLEN);
 }
 
 /*
diff --git a/fs/xfs/xfs_bmap_btree.h b/fs/xfs/xfs_bmap_btree.h
index a4555ab..0e8df00 100644
--- a/fs/xfs/xfs_bmap_btree.h
+++ b/fs/xfs/xfs_bmap_btree.h
@@ -76,26 +76,22 @@
 #define DSTARTBLOCKMASK		\
 	(((((xfs_dfsbno_t)1) << DSTARTBLOCKMASKBITS) - 1) << STARTBLOCKVALBITS)
 
-#define ISNULLSTARTBLOCK(x)	isnullstartblock(x)
 static inline int isnullstartblock(xfs_fsblock_t x)
 {
 	return ((x) & STARTBLOCKMASK) == STARTBLOCKMASK;
 }
 
-#define ISNULLDSTARTBLOCK(x)	isnulldstartblock(x)
 static inline int isnulldstartblock(xfs_dfsbno_t x)
 {
 	return ((x) & DSTARTBLOCKMASK) == DSTARTBLOCKMASK;
 }
 
-#define NULLSTARTBLOCK(k)	nullstartblock(k)
 static inline xfs_fsblock_t nullstartblock(int k)
 {
 	ASSERT(k < (1 << STARTBLOCKVALBITS));
 	return STARTBLOCKMASK | (k);
 }
 
-#define STARTBLOCKVAL(x)	startblockval(x)
 static inline xfs_filblks_t startblockval(xfs_fsblock_t x)
 {
 	return (xfs_filblks_t)((x) & ~STARTBLOCKMASK);
diff --git a/fs/xfs/xfs_btree.c b/fs/xfs/xfs_btree.c
index 7ed5926..e73c332 100644
--- a/fs/xfs/xfs_btree.c
+++ b/fs/xfs/xfs_btree.c
@@ -730,8 +730,8 @@
 	struct xfs_btree_block	*block)
 {
 	int			rval = 0;
-	xfs_fsblock_t		left = be64_to_cpu(block->bb_u.l.bb_leftsib);
-	xfs_fsblock_t		right = be64_to_cpu(block->bb_u.l.bb_rightsib);
+	xfs_dfsbno_t		left = be64_to_cpu(block->bb_u.l.bb_leftsib);
+	xfs_dfsbno_t		right = be64_to_cpu(block->bb_u.l.bb_rightsib);
 
 	if ((lr & XFS_BTCUR_LEFTRA) && left != NULLDFSBNO) {
 		xfs_btree_reada_bufl(cur->bc_mp, left, 1);
@@ -843,7 +843,7 @@
 	union xfs_btree_ptr	*ptr)
 {
 	if (cur->bc_flags & XFS_BTREE_LONG_PTRS)
-		return be64_to_cpu(ptr->l) == NULLFSBLOCK;
+		return be64_to_cpu(ptr->l) == NULLDFSBNO;
 	else
 		return be32_to_cpu(ptr->s) == NULLAGBLOCK;
 }
@@ -854,7 +854,7 @@
 	union xfs_btree_ptr	*ptr)
 {
 	if (cur->bc_flags & XFS_BTREE_LONG_PTRS)
-		ptr->l = cpu_to_be64(NULLFSBLOCK);
+		ptr->l = cpu_to_be64(NULLDFSBNO);
 	else
 		ptr->s = cpu_to_be32(NULLAGBLOCK);
 }
@@ -918,8 +918,8 @@
 	new->bb_numrecs = cpu_to_be16(numrecs);
 
 	if (cur->bc_flags & XFS_BTREE_LONG_PTRS) {
-		new->bb_u.l.bb_leftsib = cpu_to_be64(NULLFSBLOCK);
-		new->bb_u.l.bb_rightsib = cpu_to_be64(NULLFSBLOCK);
+		new->bb_u.l.bb_leftsib = cpu_to_be64(NULLDFSBNO);
+		new->bb_u.l.bb_rightsib = cpu_to_be64(NULLDFSBNO);
 	} else {
 		new->bb_u.s.bb_leftsib = cpu_to_be32(NULLAGBLOCK);
 		new->bb_u.s.bb_rightsib = cpu_to_be32(NULLAGBLOCK);
@@ -960,7 +960,7 @@
 		ptr->l = cpu_to_be64(XFS_DADDR_TO_FSB(cur->bc_mp,
 					XFS_BUF_ADDR(bp)));
 	else {
-		ptr->s = cpu_to_be32(XFS_DADDR_TO_AGBNO(cur->bc_mp,
+		ptr->s = cpu_to_be32(xfs_daddr_to_agbno(cur->bc_mp,
 					XFS_BUF_ADDR(bp)));
 	}
 }
@@ -971,7 +971,7 @@
 	union xfs_btree_ptr	*ptr)
 {
 	if (cur->bc_flags & XFS_BTREE_LONG_PTRS) {
-		ASSERT(be64_to_cpu(ptr->l) != NULLFSBLOCK);
+		ASSERT(be64_to_cpu(ptr->l) != NULLDFSBNO);
 
 		return XFS_FSB_TO_DADDR(cur->bc_mp, be64_to_cpu(ptr->l));
 	} else {
@@ -2454,7 +2454,7 @@
 	xfs_btree_log_ptrs(cur, cbp, 1, be16_to_cpu(cblock->bb_numrecs));
 
 	*logflags |=
-		XFS_ILOG_CORE | XFS_ILOG_FBROOT(cur->bc_private.b.whichfork);
+		XFS_ILOG_CORE | xfs_ilog_fbroot(cur->bc_private.b.whichfork);
 	*stat = 1;
 	XFS_BTREE_TRACE_CURSOR(cur, XBT_EXIT);
 	return 0;
@@ -3048,7 +3048,7 @@
 	cur->bc_bufs[level - 1] = NULL;
 	be16_add_cpu(&block->bb_level, -1);
 	xfs_trans_log_inode(cur->bc_tp, ip,
-		XFS_ILOG_CORE | XFS_ILOG_FBROOT(cur->bc_private.b.whichfork));
+		XFS_ILOG_CORE | xfs_ilog_fbroot(cur->bc_private.b.whichfork));
 	cur->bc_nlevels--;
 out0:
 	XFS_BTREE_TRACE_CURSOR(cur, XBT_EXIT);
diff --git a/fs/xfs/xfs_da_btree.c b/fs/xfs/xfs_da_btree.c
index a11a839..c45f74f 100644
--- a/fs/xfs/xfs_da_btree.c
+++ b/fs/xfs/xfs_da_btree.c
@@ -1597,7 +1597,7 @@
 	nmap = 1;
 	ASSERT(args->firstblock != NULL);
 	if ((error = xfs_bmapi(tp, dp, bno, count,
-			XFS_BMAPI_AFLAG(w)|XFS_BMAPI_WRITE|XFS_BMAPI_METADATA|
+			xfs_bmapi_aflag(w)|XFS_BMAPI_WRITE|XFS_BMAPI_METADATA|
 			XFS_BMAPI_CONTIG,
 			args->firstblock, args->total, &map, &nmap,
 			args->flist, NULL))) {
@@ -1618,7 +1618,7 @@
 			nmap = MIN(XFS_BMAP_MAX_NMAP, count);
 			c = (int)(bno + count - b);
 			if ((error = xfs_bmapi(tp, dp, b, c,
-					XFS_BMAPI_AFLAG(w)|XFS_BMAPI_WRITE|
+					xfs_bmapi_aflag(w)|XFS_BMAPI_WRITE|
 					XFS_BMAPI_METADATA,
 					args->firstblock, args->total,
 					&mapp[mapi], &nmap, args->flist,
@@ -1882,7 +1882,7 @@
 		 * the last block to the place we want to kill.
 		 */
 		if ((error = xfs_bunmapi(tp, dp, dead_blkno, count,
-				XFS_BMAPI_AFLAG(w)|XFS_BMAPI_METADATA,
+				xfs_bmapi_aflag(w)|XFS_BMAPI_METADATA,
 				0, args->firstblock, args->flist, NULL,
 				&done)) == ENOSPC) {
 			if (w != XFS_DATA_FORK)
@@ -1987,7 +1987,7 @@
 			if ((error = xfs_bmapi(trans, dp, (xfs_fileoff_t)bno,
 					nfsb,
 					XFS_BMAPI_METADATA |
-						XFS_BMAPI_AFLAG(whichfork),
+						xfs_bmapi_aflag(whichfork),
 					NULL, 0, mapp, &nmap, NULL, NULL)))
 				goto exit0;
 		}
diff --git a/fs/xfs/xfs_dir2_block.c b/fs/xfs/xfs_dir2_block.c
index e2fa0a1..e1f0a06 100644
--- a/fs/xfs/xfs_dir2_block.c
+++ b/fs/xfs/xfs_dir2_block.c
@@ -517,9 +517,9 @@
 		/*
 		 * If it didn't fit, set the final offset to here & return.
 		 */
-		if (filldir(dirent, dep->name, dep->namelen, cook,
+		if (filldir(dirent, dep->name, dep->namelen, cook & 0x7fffffff,
 			    ino, DT_UNKNOWN)) {
-			*offset = cook;
+			*offset = cook & 0x7fffffff;
 			xfs_da_brelse(NULL, bp);
 			return 0;
 		}
@@ -529,7 +529,8 @@
 	 * Reached the end of the block.
 	 * Set the offset to a non-existent block 1 and return.
 	 */
-	*offset = xfs_dir2_db_off_to_dataptr(mp, mp->m_dirdatablk + 1, 0);
+	*offset = xfs_dir2_db_off_to_dataptr(mp, mp->m_dirdatablk + 1, 0) &
+			0x7fffffff;
 	xfs_da_brelse(NULL, bp);
 	return 0;
 }
diff --git a/fs/xfs/xfs_dir2_leaf.c b/fs/xfs/xfs_dir2_leaf.c
index 9353599..ef805a3 100644
--- a/fs/xfs/xfs_dir2_leaf.c
+++ b/fs/xfs/xfs_dir2_leaf.c
@@ -1092,7 +1092,7 @@
 		 * Won't fit.  Return to caller.
 		 */
 		if (filldir(dirent, dep->name, dep->namelen,
-			    xfs_dir2_byte_to_dataptr(mp, curoff),
+			    xfs_dir2_byte_to_dataptr(mp, curoff) & 0x7fffffff,
 			    ino, DT_UNKNOWN))
 			break;
 
@@ -1108,9 +1108,9 @@
 	 * All done.  Set output offset value to current offset.
 	 */
 	if (curoff > xfs_dir2_dataptr_to_byte(mp, XFS_DIR2_MAX_DATAPTR))
-		*offset = XFS_DIR2_MAX_DATAPTR;
+		*offset = XFS_DIR2_MAX_DATAPTR & 0x7fffffff;
 	else
-		*offset = xfs_dir2_byte_to_dataptr(mp, curoff);
+		*offset = xfs_dir2_byte_to_dataptr(mp, curoff) & 0x7fffffff;
 	kmem_free(map);
 	if (bp)
 		xfs_da_brelse(NULL, bp);
diff --git a/fs/xfs/xfs_dir2_sf.c b/fs/xfs/xfs_dir2_sf.c
index b46af00..a8a8a6e 100644
--- a/fs/xfs/xfs_dir2_sf.c
+++ b/fs/xfs/xfs_dir2_sf.c
@@ -752,8 +752,8 @@
 #if XFS_BIG_INUMS
 		ino += mp->m_inoadd;
 #endif
-		if (filldir(dirent, ".", 1, dot_offset, ino, DT_DIR)) {
-			*offset = dot_offset;
+		if (filldir(dirent, ".", 1, dot_offset & 0x7fffffff, ino, DT_DIR)) {
+			*offset = dot_offset & 0x7fffffff;
 			return 0;
 		}
 	}
@@ -766,8 +766,8 @@
 #if XFS_BIG_INUMS
 		ino += mp->m_inoadd;
 #endif
-		if (filldir(dirent, "..", 2, dotdot_offset, ino, DT_DIR)) {
-			*offset = dotdot_offset;
+		if (filldir(dirent, "..", 2, dotdot_offset & 0x7fffffff, ino, DT_DIR)) {
+			*offset = dotdot_offset & 0x7fffffff;
 			return 0;
 		}
 	}
@@ -791,14 +791,15 @@
 #endif
 
 		if (filldir(dirent, sfep->name, sfep->namelen,
-					    off, ino, DT_UNKNOWN)) {
-			*offset = off;
+			    off & 0x7fffffff, ino, DT_UNKNOWN)) {
+			*offset = off & 0x7fffffff;
 			return 0;
 		}
 		sfep = xfs_dir2_sf_nextentry(sfp, sfep);
 	}
 
-	*offset = xfs_dir2_db_off_to_dataptr(mp, mp->m_dirdatablk + 1, 0);
+	*offset = xfs_dir2_db_off_to_dataptr(mp, mp->m_dirdatablk + 1, 0) &
+			0x7fffffff;
 	return 0;
 }
 
diff --git a/fs/xfs/xfs_ialloc.c b/fs/xfs/xfs_ialloc.c
index e6ebbaeb..ab016e5 100644
--- a/fs/xfs/xfs_ialloc.c
+++ b/fs/xfs/xfs_ialloc.c
@@ -357,7 +357,7 @@
 			int	ioffset = i << args.mp->m_sb.sb_inodelog;
 			uint	isize = sizeof(struct xfs_dinode);
 
-			free = XFS_MAKE_IPTR(args.mp, fbuf, i);
+			free = xfs_make_iptr(args.mp, fbuf, i);
 			free->di_magic = cpu_to_be16(XFS_DINODE_MAGIC);
 			free->di_version = version;
 			free->di_gen = cpu_to_be32(gen);
@@ -937,7 +937,7 @@
 			}
 		}
 	}
-	offset = XFS_IALLOC_FIND_FREE(&rec.ir_free);
+	offset = xfs_ialloc_find_free(&rec.ir_free);
 	ASSERT(offset >= 0);
 	ASSERT(offset < XFS_INODES_PER_CHUNK);
 	ASSERT((XFS_AGINO_TO_OFFSET(mp, rec.ir_startino) %
@@ -1279,7 +1279,7 @@
 		offset = XFS_INO_TO_OFFSET(mp, ino);
 		ASSERT(offset < mp->m_sb.sb_inopblock);
 
-		cluster_agbno = XFS_DADDR_TO_AGBNO(mp, imap->im_blkno);
+		cluster_agbno = xfs_daddr_to_agbno(mp, imap->im_blkno);
 		offset += (agbno - cluster_agbno) * mp->m_sb.sb_inopblock;
 
 		imap->im_len = XFS_FSB_TO_BB(mp, blks_per_cluster);
diff --git a/fs/xfs/xfs_ialloc.h b/fs/xfs/xfs_ialloc.h
index 50f558a4..aeee827 100644
--- a/fs/xfs/xfs_ialloc.h
+++ b/fs/xfs/xfs_ialloc.h
@@ -39,7 +39,6 @@
 /*
  * Make an inode pointer out of the buffer/offset.
  */
-#define	XFS_MAKE_IPTR(mp,b,o)		xfs_make_iptr(mp,b,o)
 static inline struct xfs_dinode *
 xfs_make_iptr(struct xfs_mount *mp, struct xfs_buf *b, int o)
 {
@@ -50,7 +49,6 @@
 /*
  * Find a free (set) bit in the inode bitmask.
  */
-#define	XFS_IALLOC_FIND_FREE(fp)	xfs_ialloc_find_free(fp)
 static inline int xfs_ialloc_find_free(xfs_inofree_t *fp)
 {
 	return xfs_lowbit64(*fp);
diff --git a/fs/xfs/xfs_ialloc_btree.h b/fs/xfs/xfs_ialloc_btree.h
index 37e5dd0..5580e25 100644
--- a/fs/xfs/xfs_ialloc_btree.h
+++ b/fs/xfs/xfs_ialloc_btree.h
@@ -36,7 +36,6 @@
 #define	XFS_INODES_PER_CHUNK_LOG	(XFS_NBBYLOG + 3)
 #define	XFS_INOBT_ALL_FREE	((xfs_inofree_t)-1)
 
-#define	XFS_INOBT_MASKN(i,n)		xfs_inobt_maskn(i,n)
 static inline xfs_inofree_t xfs_inobt_maskn(int i, int n)
 {
 	return (((n) >= XFS_INODES_PER_CHUNK ? \
diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index 5a5e035..e7ae08d1 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -424,6 +424,19 @@
 	case XFS_DINODE_FMT_LOCAL:
 		atp = (xfs_attr_shortform_t *)XFS_DFORK_APTR(dip);
 		size = be16_to_cpu(atp->hdr.totsize);
+
+		if (unlikely(size < sizeof(struct xfs_attr_sf_hdr))) {
+			xfs_fs_repair_cmn_err(CE_WARN, ip->i_mount,
+				"corrupt inode %Lu "
+				"(bad attr fork size %Ld).",
+				(unsigned long long) ip->i_ino,
+				(long long) size);
+			XFS_CORRUPTION_ERROR("xfs_iformat(8)",
+					     XFS_ERRLEVEL_LOW,
+					     ip->i_mount, dip);
+			return XFS_ERROR(EFSCORRUPTED);
+		}
+
 		error = xfs_iformat_local(ip, dip, XFS_ATTR_FORK, size);
 		break;
 	case XFS_DINODE_FMT_EXTENTS:
@@ -1601,10 +1614,10 @@
 		 * in this file with garbage in them once recovery
 		 * runs.
 		 */
-		XFS_BMAP_INIT(&free_list, &first_block);
+		xfs_bmap_init(&free_list, &first_block);
 		error = xfs_bunmapi(ntp, ip,
 				    first_unmap_block, unmap_len,
-				    XFS_BMAPI_AFLAG(fork) |
+				    xfs_bmapi_aflag(fork) |
 				      (sync ? 0 : XFS_BMAPI_ASYNC),
 				    XFS_ITRUNC_MAX_EXTENTS,
 				    &first_block, &free_list,
@@ -2557,7 +2570,7 @@
 	for (i = 0; i < nrecs; i++) {
 		xfs_bmbt_rec_host_t *ep = xfs_iext_get_ext(ifp, i);
 		start_block = xfs_bmbt_get_startblock(ep);
-		if (ISNULLSTARTBLOCK(start_block)) {
+		if (isnullstartblock(start_block)) {
 			/*
 			 * It's a delayed allocation extent, so skip it.
 			 */
diff --git a/fs/xfs/xfs_inode_item.h b/fs/xfs/xfs_inode_item.h
index 1ff04cc..9957d06 100644
--- a/fs/xfs/xfs_inode_item.h
+++ b/fs/xfs/xfs_inode_item.h
@@ -111,20 +111,16 @@
 
 #define	XFS_ILI_IOLOCKED_ANY   (XFS_ILI_IOLOCKED_EXCL | XFS_ILI_IOLOCKED_SHARED)
 
-
-#define	XFS_ILOG_FBROOT(w)	xfs_ilog_fbroot(w)
 static inline int xfs_ilog_fbroot(int w)
 {
 	return (w == XFS_DATA_FORK ? XFS_ILOG_DBROOT : XFS_ILOG_ABROOT);
 }
 
-#define	XFS_ILOG_FEXT(w)	xfs_ilog_fext(w)
 static inline int xfs_ilog_fext(int w)
 {
 	return (w == XFS_DATA_FORK ? XFS_ILOG_DEXT : XFS_ILOG_AEXT);
 }
 
-#define	XFS_ILOG_FDATA(w)	xfs_ilog_fdata(w)
 static inline int xfs_ilog_fdata(int w)
 {
 	return (w == XFS_DATA_FORK ? XFS_ILOG_DDATA : XFS_ILOG_ADATA);
diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
index 911062c..08ce723 100644
--- a/fs/xfs/xfs_iomap.c
+++ b/fs/xfs/xfs_iomap.c
@@ -155,7 +155,7 @@
 			iomapp->iomap_bn = IOMAP_DADDR_NULL;
 			iomapp->iomap_flags |= IOMAP_DELAY;
 		} else {
-			iomapp->iomap_bn = XFS_FSB_TO_DB(ip, start_block);
+			iomapp->iomap_bn = xfs_fsb_to_db(ip, start_block);
 			if (ISUNWRITTEN(imap))
 				iomapp->iomap_flags |= IOMAP_UNWRITTEN;
 		}
@@ -261,7 +261,7 @@
 		xfs_iunlock(ip, lockmode);
 		lockmode = 0;
 
-		if (nimaps && !ISNULLSTARTBLOCK(imap.br_startblock)) {
+		if (nimaps && !isnullstartblock(imap.br_startblock)) {
 			xfs_iomap_map_trace(XFS_IOMAP_WRITE_MAP, ip,
 					offset, count, iomapp, &imap, flags);
 			break;
@@ -491,7 +491,7 @@
 	/*
 	 * Issue the xfs_bmapi() call to allocate the blocks
 	 */
-	XFS_BMAP_INIT(&free_list, &firstfsb);
+	xfs_bmap_init(&free_list, &firstfsb);
 	nimaps = 1;
 	error = xfs_bmapi(tp, ip, offset_fsb, count_fsb, bmapi_flag,
 		&firstfsb, 0, &imap, &nimaps, &free_list, NULL);
@@ -751,7 +751,7 @@
 			xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
 			xfs_trans_ihold(tp, ip);
 
-			XFS_BMAP_INIT(&free_list, &first_block);
+			xfs_bmap_init(&free_list, &first_block);
 
 			/*
 			 * it is possible that the extents have changed since
@@ -911,7 +911,7 @@
 		/*
 		 * Modify the unwritten extent state of the buffer.
 		 */
-		XFS_BMAP_INIT(&free_list, &firstfsb);
+		xfs_bmap_init(&free_list, &firstfsb);
 		nimaps = 1;
 		error = xfs_bmapi(tp, ip, offset_fsb, count_fsb,
 				  XFS_BMAPI_WRITE|XFS_BMAPI_CONVERT, &firstfsb,
diff --git a/fs/xfs/xfs_itable.c b/fs/xfs/xfs_itable.c
index e19d0a8..cf98a805 100644
--- a/fs/xfs/xfs_itable.c
+++ b/fs/xfs/xfs_itable.c
@@ -453,7 +453,7 @@
 			    (chunkidx = agino - gino + 1) <
 				    XFS_INODES_PER_CHUNK &&
 					/* there are some left allocated */
-			    XFS_INOBT_MASKN(chunkidx,
+			    xfs_inobt_maskn(chunkidx,
 				    XFS_INODES_PER_CHUNK - chunkidx) & ~gfree) {
 				/*
 				 * Grab the chunk record.  Mark all the
@@ -464,7 +464,7 @@
 					if (XFS_INOBT_MASK(i) & ~gfree)
 						gcnt++;
 				}
-				gfree |= XFS_INOBT_MASKN(0, chunkidx);
+				gfree |= xfs_inobt_maskn(0, chunkidx);
 				irbp->ir_startino = gino;
 				irbp->ir_freecount = gcnt;
 				irbp->ir_free = gfree;
@@ -535,7 +535,7 @@
 				     chunkidx < XFS_INODES_PER_CHUNK;
 				     chunkidx += nicluster,
 				     agbno += nbcluster) {
-					if (XFS_INOBT_MASKN(chunkidx,
+					if (xfs_inobt_maskn(chunkidx,
 							    nicluster) & ~gfree)
 						xfs_btree_reada_bufs(mp, agno,
 							agbno, nbcluster);
diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c
index 3c97c64..3530025 100644
--- a/fs/xfs/xfs_mount.c
+++ b/fs/xfs/xfs_mount.c
@@ -45,7 +45,6 @@
 #include "xfs_fsops.h"
 #include "xfs_utils.h"
 
-STATIC int	xfs_mount_log_sb(xfs_mount_t *, __int64_t);
 STATIC int	xfs_uuid_mount(xfs_mount_t *);
 STATIC void	xfs_unmountfs_wait(xfs_mount_t *);
 
@@ -682,7 +681,7 @@
  * Update alignment values based on mount options and sb values
  */
 STATIC int
-xfs_update_alignment(xfs_mount_t *mp, __uint64_t *update_flags)
+xfs_update_alignment(xfs_mount_t *mp)
 {
 	xfs_sb_t	*sbp = &(mp->m_sb);
 
@@ -736,11 +735,11 @@
 		if (xfs_sb_version_hasdalign(sbp)) {
 			if (sbp->sb_unit != mp->m_dalign) {
 				sbp->sb_unit = mp->m_dalign;
-				*update_flags |= XFS_SB_UNIT;
+				mp->m_update_flags |= XFS_SB_UNIT;
 			}
 			if (sbp->sb_width != mp->m_swidth) {
 				sbp->sb_width = mp->m_swidth;
-				*update_flags |= XFS_SB_WIDTH;
+				mp->m_update_flags |= XFS_SB_WIDTH;
 			}
 		}
 	} else if ((mp->m_flags & XFS_MOUNT_NOALIGN) != XFS_MOUNT_NOALIGN &&
@@ -905,7 +904,6 @@
 	xfs_sb_t	*sbp = &(mp->m_sb);
 	xfs_inode_t	*rip;
 	__uint64_t	resblks;
-	__int64_t	update_flags = 0LL;
 	uint		quotamount, quotaflags;
 	int		uuid_mounted = 0;
 	int		error = 0;
@@ -933,7 +931,7 @@
 			"XFS: correcting sb_features alignment problem");
 		sbp->sb_features2 |= sbp->sb_bad_features2;
 		sbp->sb_bad_features2 = sbp->sb_features2;
-		update_flags |= XFS_SB_FEATURES2 | XFS_SB_BAD_FEATURES2;
+		mp->m_update_flags |= XFS_SB_FEATURES2 | XFS_SB_BAD_FEATURES2;
 
 		/*
 		 * Re-check for ATTR2 in case it was found in bad_features2
@@ -947,11 +945,11 @@
 	if (xfs_sb_version_hasattr2(&mp->m_sb) &&
 	   (mp->m_flags & XFS_MOUNT_NOATTR2)) {
 		xfs_sb_version_removeattr2(&mp->m_sb);
-		update_flags |= XFS_SB_FEATURES2;
+		mp->m_update_flags |= XFS_SB_FEATURES2;
 
 		/* update sb_versionnum for the clearing of the morebits */
 		if (!sbp->sb_features2)
-			update_flags |= XFS_SB_VERSIONNUM;
+			mp->m_update_flags |= XFS_SB_VERSIONNUM;
 	}
 
 	/*
@@ -960,7 +958,7 @@
 	 * allocator alignment is within an ag, therefore ag has
 	 * to be aligned at stripe boundary.
 	 */
-	error = xfs_update_alignment(mp, &update_flags);
+	error = xfs_update_alignment(mp);
 	if (error)
 		goto error1;
 
@@ -1137,10 +1135,12 @@
 	}
 
 	/*
-	 * If fs is not mounted readonly, then update the superblock changes.
+	 * If this is a read-only mount defer the superblock updates until
+	 * the next remount into writeable mode.  Otherwise we would never
+	 * perform the update e.g. for the root filesystem.
 	 */
-	if (update_flags && !(mp->m_flags & XFS_MOUNT_RDONLY)) {
-		error = xfs_mount_log_sb(mp, update_flags);
+	if (mp->m_update_flags && !(mp->m_flags & XFS_MOUNT_RDONLY)) {
+		error = xfs_mount_log_sb(mp, mp->m_update_flags);
 		if (error) {
 			cmn_err(CE_WARN, "XFS: failed to write sb changes");
 			goto error4;
@@ -1820,7 +1820,7 @@
  * be altered by the mount options, as well as any potential sb_features2
  * fixup. Only the first superblock is updated.
  */
-STATIC int
+int
 xfs_mount_log_sb(
 	xfs_mount_t	*mp,
 	__int64_t	fields)
diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h
index c1e0284..f5e9937 100644
--- a/fs/xfs/xfs_mount.h
+++ b/fs/xfs/xfs_mount.h
@@ -44,9 +44,9 @@
 
 #ifndef __KERNEL__
 
-#define XFS_DADDR_TO_AGNO(mp,d) \
+#define xfs_daddr_to_agno(mp,d) \
 	((xfs_agnumber_t)(XFS_BB_TO_FSBT(mp, d) / (mp)->m_sb.sb_agblocks))
-#define XFS_DADDR_TO_AGBNO(mp,d) \
+#define xfs_daddr_to_agbno(mp,d) \
 	((xfs_agblock_t)(XFS_BB_TO_FSBT(mp, d) % (mp)->m_sb.sb_agblocks))
 
 #else /* __KERNEL__ */
@@ -327,6 +327,8 @@
 	spinlock_t		m_sync_lock;	/* work item list lock */
 	int			m_sync_seq;	/* sync thread generation no. */
 	wait_queue_head_t	m_wait_single_sync_task;
+	__int64_t		m_update_flags;	/* sb flags we need to update
+						   on the next remount,rw */
 } xfs_mount_t;
 
 /*
@@ -439,7 +441,6 @@
  */
 #define XFS_MFSI_QUIET		0x40	/* Be silent if mount errors found */
 
-#define XFS_DADDR_TO_AGNO(mp,d)         xfs_daddr_to_agno(mp,d)
 static inline xfs_agnumber_t
 xfs_daddr_to_agno(struct xfs_mount *mp, xfs_daddr_t d)
 {
@@ -448,7 +449,6 @@
 	return (xfs_agnumber_t) ld;
 }
 
-#define XFS_DADDR_TO_AGBNO(mp,d)        xfs_daddr_to_agbno(mp,d)
 static inline xfs_agblock_t
 xfs_daddr_to_agbno(struct xfs_mount *mp, xfs_daddr_t d)
 {
@@ -514,6 +514,7 @@
 			int64_t, int);
 extern int	xfs_mod_incore_sb_batch(xfs_mount_t *, xfs_mod_sb_t *,
 			uint, int);
+extern int	xfs_mount_log_sb(xfs_mount_t *, __int64_t);
 extern struct xfs_buf *xfs_getsb(xfs_mount_t *, int);
 extern int	xfs_readsb(xfs_mount_t *, int);
 extern void	xfs_freesb(xfs_mount_t *);
diff --git a/fs/xfs/xfs_rename.c b/fs/xfs/xfs_rename.c
index 86471bb..58f85e9 100644
--- a/fs/xfs/xfs_rename.c
+++ b/fs/xfs/xfs_rename.c
@@ -147,7 +147,7 @@
 	xfs_sort_for_rename(src_dp, target_dp, src_ip, target_ip,
 				inodes, &num_inodes);
 
-	XFS_BMAP_INIT(&free_list, &first_block);
+	xfs_bmap_init(&free_list, &first_block);
 	tp = xfs_trans_alloc(mp, XFS_TRANS_RENAME);
 	cancel_flags = XFS_TRANS_RELEASE_LOG_RES;
 	spaceres = XFS_RENAME_SPACE_RES(mp, target_name->len);
diff --git a/fs/xfs/xfs_rtalloc.c b/fs/xfs/xfs_rtalloc.c
index edf12c7..c5bb86f 100644
--- a/fs/xfs/xfs_rtalloc.c
+++ b/fs/xfs/xfs_rtalloc.c
@@ -120,7 +120,7 @@
 		if ((error = xfs_trans_iget(mp, tp, ino, 0,
 						XFS_ILOCK_EXCL, &ip)))
 			goto error_cancel;
-		XFS_BMAP_INIT(&flist, &firstblock);
+		xfs_bmap_init(&flist, &firstblock);
 		/*
 		 * Allocate blocks to the bitmap file.
 		 */
diff --git a/fs/xfs/xfs_rw.h b/fs/xfs/xfs_rw.h
index f87db53..f76c003 100644
--- a/fs/xfs/xfs_rw.h
+++ b/fs/xfs/xfs_rw.h
@@ -28,7 +28,6 @@
  * file is a real time file or not, because the bmap code
  * does.
  */
-#define	XFS_FSB_TO_DB(ip,fsb)	xfs_fsb_to_db(ip,fsb)
 static inline xfs_daddr_t
 xfs_fsb_to_db(struct xfs_inode *ip, xfs_fsblock_t fsb)
 {
diff --git a/fs/xfs/xfs_sb.h b/fs/xfs/xfs_sb.h
index 1ed7191..1b017c6 100644
--- a/fs/xfs/xfs_sb.h
+++ b/fs/xfs/xfs_sb.h
@@ -505,7 +505,7 @@
 
 #define	XFS_HDR_BLOCK(mp,d)	((xfs_agblock_t)XFS_BB_TO_FSBT(mp,d))
 #define	XFS_DADDR_TO_FSB(mp,d)	XFS_AGB_TO_FSB(mp, \
-			XFS_DADDR_TO_AGNO(mp,d), XFS_DADDR_TO_AGBNO(mp,d))
+			xfs_daddr_to_agno(mp,d), xfs_daddr_to_agbno(mp,d))
 #define	XFS_FSB_TO_DADDR(mp,fsbno)	XFS_AGB_TO_DADDR(mp, \
 			XFS_FSB_TO_AGNO(mp,fsbno), XFS_FSB_TO_AGBNO(mp,fsbno))
 
diff --git a/fs/xfs/xfs_types.h b/fs/xfs/xfs_types.h
index 0f51916..b2f7245 100644
--- a/fs/xfs/xfs_types.h
+++ b/fs/xfs/xfs_types.h
@@ -45,7 +45,7 @@
 typedef __uint32_t		inst_t;		/* an instruction */
 
 typedef __s64			xfs_off_t;	/* <file offset> type */
-typedef __u64			xfs_ino_t;	/* <inode> type */
+typedef unsigned long long	xfs_ino_t;	/* <inode> type */
 typedef __s64			xfs_daddr_t;	/* <disk address> type */
 typedef char *			xfs_caddr_t;	/* <core address> type */
 typedef __u32			xfs_dev_t;
@@ -111,8 +111,6 @@
 typedef __int64_t	xfs_sfiloff_t;	/* signed block number in a file */
 typedef __uint64_t	xfs_filblks_t;	/* number of blocks in a file */
 
-typedef __uint8_t	xfs_arch_t;	/* architecture of an xfs fs */
-
 /*
  * Null values for the types.
  */
diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index f07bf87..0e55c5d 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -862,7 +862,7 @@
 	 * Find the block(s) so we can inval and unmap them.
 	 */
 	done = 0;
-	XFS_BMAP_INIT(&free_list, &first_block);
+	xfs_bmap_init(&free_list, &first_block);
 	nmaps = ARRAY_SIZE(mval);
 	if ((error = xfs_bmapi(tp, ip, 0, XFS_B_TO_FSB(mp, size),
 			XFS_BMAPI_METADATA, &first_block, 0, mval, &nmaps,
@@ -1288,7 +1288,7 @@
 	/*
 	 * Free the inode.
 	 */
-	XFS_BMAP_INIT(&free_list, &first_block);
+	xfs_bmap_init(&free_list, &first_block);
 	error = xfs_ifree(tp, ip, &free_list);
 	if (error) {
 		/*
@@ -1461,7 +1461,7 @@
 	xfs_ilock(dp, XFS_ILOCK_EXCL | XFS_ILOCK_PARENT);
 	unlock_dp_on_error = B_TRUE;
 
-	XFS_BMAP_INIT(&free_list, &first_block);
+	xfs_bmap_init(&free_list, &first_block);
 
 	ASSERT(ip == NULL);
 
@@ -1879,7 +1879,7 @@
 		}
 	}
 
-	XFS_BMAP_INIT(&free_list, &first_block);
+	xfs_bmap_init(&free_list, &first_block);
 	error = xfs_dir_removename(tp, dp, name, ip->i_ino,
 					&first_block, &free_list, resblks);
 	if (error) {
@@ -2059,7 +2059,7 @@
 	if (error)
 		goto error_return;
 
-	XFS_BMAP_INIT(&free_list, &first_block);
+	xfs_bmap_init(&free_list, &first_block);
 
 	error = xfs_dir_createname(tp, tdp, target_name, sip->i_ino,
 					&first_block, &free_list, resblks);
@@ -2231,7 +2231,7 @@
 	xfs_trans_ijoin(tp, dp, XFS_ILOCK_EXCL);
 	unlock_dp_on_error = B_FALSE;
 
-	XFS_BMAP_INIT(&free_list, &first_block);
+	xfs_bmap_init(&free_list, &first_block);
 
 	error = xfs_dir_createname(tp, dp, dir_name, cdp->i_ino,
 					&first_block, &free_list, resblks ?
@@ -2438,7 +2438,7 @@
 	 * Initialize the bmap freelist prior to calling either
 	 * bmapi or the directory create code.
 	 */
-	XFS_BMAP_INIT(&free_list, &first_block);
+	xfs_bmap_init(&free_list, &first_block);
 
 	/*
 	 * Allocate an inode for the symlink.
@@ -2860,7 +2860,7 @@
 		/*
 		 * Issue the xfs_bmapi() call to allocate the blocks
 		 */
-		XFS_BMAP_INIT(&free_list, &firstfsb);
+		xfs_bmap_init(&free_list, &firstfsb);
 		error = xfs_bmapi(tp, ip, startoffset_fsb,
 				  allocatesize_fsb, bmapi_flag,
 				  &firstfsb, 0, imapp, &nimaps,
@@ -2980,7 +2980,7 @@
 		XFS_BUF_UNDONE(bp);
 		XFS_BUF_UNWRITE(bp);
 		XFS_BUF_READ(bp);
-		XFS_BUF_SET_ADDR(bp, XFS_FSB_TO_DB(ip, imap.br_startblock));
+		XFS_BUF_SET_ADDR(bp, xfs_fsb_to_db(ip, imap.br_startblock));
 		xfsbdstrat(mp, bp);
 		error = xfs_iowait(bp);
 		if (error) {
@@ -3186,7 +3186,7 @@
 		/*
 		 * issue the bunmapi() call to free the blocks
 		 */
-		XFS_BMAP_INIT(&free_list, &firstfsb);
+		xfs_bmap_init(&free_list, &firstfsb);
 		error = xfs_bunmapi(tp, ip, startoffset_fsb,
 				  endoffset_fsb - startoffset_fsb,
 				  0, 2, &firstfsb, &free_list, NULL, &done);
diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h
index 813e4b6..bf8d4cf 100644
--- a/include/acpi/actbl.h
+++ b/include/acpi/actbl.h
@@ -245,7 +245,7 @@
 #define ACPI_FADT_POWER_BUTTON      (1<<4)	/* 04: Power button is handled as a generic feature */
 #define ACPI_FADT_SLEEP_BUTTON      (1<<5)	/* 05: Sleep button is handled as a generic feature, or  not present */
 #define ACPI_FADT_FIXED_RTC         (1<<6)	/* 06: RTC wakeup stat not in fixed register space */
-#define ACPI_FADT_S4_RTC_WAKE       (1<<7)	/* 07: RTC wakeup stat not possible from S4 */
+#define ACPI_FADT_S4_RTC_WAKE       (1<<7)	/* 07: RTC wakeup possible from S4 */
 #define ACPI_FADT_32BIT_TIMER       (1<<8)	/* 08: tmr_val is 32 bits 0=24-bits */
 #define ACPI_FADT_DOCKING_SUPPORTED (1<<9)	/* 09: Docking supported */
 #define ACPI_FADT_RESET_REGISTER    (1<<10)	/* 10: System reset via the FADT RESET_REG supported */
diff --git a/include/asm-frv/Kbuild b/include/asm-frv/Kbuild
index 1f44e7c..0f8956d 100644
--- a/include/asm-frv/Kbuild
+++ b/include/asm-frv/Kbuild
@@ -3,4 +3,3 @@
 header-y += registers.h
 
 unifdef-y += termios.h
-unifdef-y += swab.h
diff --git a/include/asm-frv/byteorder.h b/include/asm-frv/byteorder.h
index 1187e51..f29b759 100644
--- a/include/asm-frv/byteorder.h
+++ b/include/asm-frv/byteorder.h
@@ -1,7 +1,6 @@
 #ifndef _ASM_BYTEORDER_H
 #define _ASM_BYTEORDER_H
 
-#include <asm/swab.h>
 #include <linux/byteorder/big_endian.h>
 
 #endif /* _ASM_BYTEORDER_H */
diff --git a/include/asm-generic/Kbuild.asm b/include/asm-generic/Kbuild.asm
index 1870d5e..70d1855 100644
--- a/include/asm-generic/Kbuild.asm
+++ b/include/asm-generic/Kbuild.asm
@@ -31,6 +31,7 @@
 unifdef-y += sockios.h
 unifdef-y += stat.h
 unifdef-y += statfs.h
+unifdef-y += swab.h
 unifdef-y += termbits.h
 unifdef-y += termios.h
 unifdef-y += types.h
diff --git a/include/asm-generic/bitops/__ffs.h b/include/asm-generic/bitops/__ffs.h
index 9a3274a..937d7c4 100644
--- a/include/asm-generic/bitops/__ffs.h
+++ b/include/asm-generic/bitops/__ffs.h
@@ -9,7 +9,7 @@
  *
  * Undefined if no bit exists, so code should check against 0 first.
  */
-static inline unsigned long __ffs(unsigned long word)
+static __always_inline unsigned long __ffs(unsigned long word)
 {
 	int num = 0;
 
diff --git a/include/asm-generic/bitops/__fls.h b/include/asm-generic/bitops/__fls.h
index be24465..a60a7cc 100644
--- a/include/asm-generic/bitops/__fls.h
+++ b/include/asm-generic/bitops/__fls.h
@@ -9,7 +9,7 @@
  *
  * Undefined if no set bit exists, so code should check against 0 first.
  */
-static inline unsigned long __fls(unsigned long word)
+static __always_inline unsigned long __fls(unsigned long word)
 {
 	int num = BITS_PER_LONG - 1;
 
diff --git a/include/asm-generic/bitops/fls.h b/include/asm-generic/bitops/fls.h
index 850859b..0576d1f 100644
--- a/include/asm-generic/bitops/fls.h
+++ b/include/asm-generic/bitops/fls.h
@@ -9,7 +9,7 @@
  * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
  */
 
-static inline int fls(int x)
+static __always_inline int fls(int x)
 {
 	int r = 32;
 
diff --git a/include/asm-generic/bitops/fls64.h b/include/asm-generic/bitops/fls64.h
index 86d403f..b097cf8 100644
--- a/include/asm-generic/bitops/fls64.h
+++ b/include/asm-generic/bitops/fls64.h
@@ -15,7 +15,7 @@
  * at position 64.
  */
 #if BITS_PER_LONG == 32
-static inline int fls64(__u64 x)
+static __always_inline int fls64(__u64 x)
 {
 	__u32 h = x >> 32;
 	if (h)
@@ -23,7 +23,7 @@
 	return fls(x);
 }
 #elif BITS_PER_LONG == 64
-static inline int fls64(__u64 x)
+static __always_inline int fls64(__u64 x)
 {
 	if (x == 0)
 		return 0;
diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h
index 72ebe91..8e6d0ca 100644
--- a/include/asm-generic/pgtable.h
+++ b/include/asm-generic/pgtable.h
@@ -301,7 +301,7 @@
  * track_pfn_vma_new is called when a _new_ pfn mapping is being established
  * for physical range indicated by pfn and size.
  */
-static inline int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t prot,
+static inline int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t *prot,
 					unsigned long pfn, unsigned long size)
 {
 	return 0;
@@ -332,7 +332,7 @@
 {
 }
 #else
-extern int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t prot,
+extern int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t *prot,
 				unsigned long pfn, unsigned long size);
 extern int track_pfn_vma_copy(struct vm_area_struct *vma);
 extern void untrack_pfn_vma(struct vm_area_struct *vma, unsigned long pfn,
diff --git a/include/asm-generic/rtc.h b/include/asm-generic/rtc.h
index 89061c1..763e3b0 100644
--- a/include/asm-generic/rtc.h
+++ b/include/asm-generic/rtc.h
@@ -42,7 +42,7 @@
 	return uip;
 }
 
-static inline unsigned int get_rtc_time(struct rtc_time *time)
+static inline unsigned int __get_rtc_time(struct rtc_time *time)
 {
 	unsigned char ctrl;
 	unsigned long flags;
@@ -108,8 +108,12 @@
 	return RTC_24H;
 }
 
+#ifndef get_rtc_time
+#define get_rtc_time	__get_rtc_time
+#endif
+
 /* Set the current date and time in the real time clock. */
-static inline int set_rtc_time(struct rtc_time *time)
+static inline int __set_rtc_time(struct rtc_time *time)
 {
 	unsigned long flags;
 	unsigned char mon, day, hrs, min, sec;
@@ -190,11 +194,15 @@
 	return 0;
 }
 
+#ifndef set_rtc_time
+#define set_rtc_time	__set_rtc_time
+#endif
+
 static inline unsigned int get_rtc_ss(void)
 {
 	struct rtc_time h;
 
-	get_rtc_time(&h);
+	__get_rtc_time(&h);
 	return h.tm_sec;
 }
 
diff --git a/include/asm-m32r/Kbuild b/include/asm-m32r/Kbuild
index 27b108a..c68e168 100644
--- a/include/asm-m32r/Kbuild
+++ b/include/asm-m32r/Kbuild
@@ -1,2 +1 @@
 include include/asm-generic/Kbuild.asm
-unifdef-y += swab.h
diff --git a/include/asm-m32r/byteorder.h b/include/asm-m32r/byteorder.h
index 61ff9cf..21855d8 100644
--- a/include/asm-m32r/byteorder.h
+++ b/include/asm-m32r/byteorder.h
@@ -1,8 +1,6 @@
 #ifndef _ASM_M32R_BYTEORDER_H
 #define _ASM_M32R_BYTEORDER_H
 
-#include <asm/swab.h>
-
 #if defined(__LITTLE_ENDIAN__)
 #  include <linux/byteorder/little_endian.h>
 #else
diff --git a/include/asm-m68k/auxvec.h b/include/asm-m68k/auxvec.h
deleted file mode 100644
index 844d6d5..0000000
--- a/include/asm-m68k/auxvec.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __ASMm68k_AUXVEC_H
-#define __ASMm68k_AUXVEC_H
-
-#endif
diff --git a/include/asm-m68k/device.h b/include/asm-m68k/device.h
deleted file mode 100644
index d8f9872..0000000
--- a/include/asm-m68k/device.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#include <asm-generic/device.h>
-
diff --git a/include/asm-m68k/emergency-restart.h b/include/asm-m68k/emergency-restart.h
deleted file mode 100644
index 108d8c4..0000000
--- a/include/asm-m68k/emergency-restart.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/include/asm-m68k/futex.h b/include/asm-m68k/futex.h
deleted file mode 100644
index 6a332a9..0000000
--- a/include/asm-m68k/futex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
-
-#include <asm-generic/futex.h>
-
-#endif
diff --git a/include/asm-m68k/ioctl.h b/include/asm-m68k/ioctl.h
deleted file mode 100644
index b279fe0..0000000
--- a/include/asm-m68k/ioctl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ioctl.h>
diff --git a/include/asm-m68k/irq_regs.h b/include/asm-m68k/irq_regs.h
deleted file mode 100644
index 3dd9c0b..0000000
--- a/include/asm-m68k/irq_regs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>
diff --git a/include/asm-m68k/kdebug.h b/include/asm-m68k/kdebug.h
deleted file mode 100644
index 6ece1b0..0000000
--- a/include/asm-m68k/kdebug.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/kdebug.h>
diff --git a/include/asm-m68k/mutex.h b/include/asm-m68k/mutex.h
deleted file mode 100644
index 458c1f7..0000000
--- a/include/asm-m68k/mutex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * Pull in the generic implementation for the mutex fastpath.
- *
- * TODO: implement optimized primitives instead, or leave the generic
- * implementation in place, or pick the atomic_xchg() based generic
- * implementation. (see asm-generic/mutex-xchg.h for details)
- */
-
-#include <asm-generic/mutex-dec.h>
diff --git a/include/asm-m68k/topology.h b/include/asm-m68k/topology.h
deleted file mode 100644
index ca173e9..0000000
--- a/include/asm-m68k/topology.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_M68K_TOPOLOGY_H
-#define _ASM_M68K_TOPOLOGY_H
-
-#include <asm-generic/topology.h>
-
-#endif /* _ASM_M68K_TOPOLOGY_H */
diff --git a/include/asm-mn10300/Kbuild b/include/asm-mn10300/Kbuild
index 27b108a..c68e168 100644
--- a/include/asm-mn10300/Kbuild
+++ b/include/asm-mn10300/Kbuild
@@ -1,2 +1 @@
 include include/asm-generic/Kbuild.asm
-unifdef-y += swab.h
diff --git a/include/asm-mn10300/byteorder.h b/include/asm-mn10300/byteorder.h
index 45b18de..5dd0bdd 100644
--- a/include/asm-mn10300/byteorder.h
+++ b/include/asm-mn10300/byteorder.h
@@ -1,7 +1,6 @@
 #ifndef _ASM_BYTEORDER_H
 #define _ASM_BYTEORDER_H
 
-#include <asm/swab.h>
 #include <linux/byteorder/little_endian.h>
 
 #endif /* _ASM_BYTEORDER_H */
diff --git a/include/drm/drm.h b/include/drm/drm.h
index 32e5096..8e77357 100644
--- a/include/drm/drm.h
+++ b/include/drm/drm.h
@@ -458,7 +458,7 @@
 	_DRM_VBLANK_FLIP = 0x8000000,   /**< Scheduled buffer swap should flip */
 	_DRM_VBLANK_NEXTONMISS = 0x10000000,	/**< If missed, wait for next vblank */
 	_DRM_VBLANK_SECONDARY = 0x20000000,	/**< Secondary display controller */
-	_DRM_VBLANK_SIGNAL = 0x40000000	/**< Send signal instead of blocking */
+	_DRM_VBLANK_SIGNAL = 0x40000000	/**< Send signal instead of blocking, unsupported */
 };
 
 #define _DRM_VBLANK_TYPES_MASK (_DRM_VBLANK_ABSOLUTE | _DRM_VBLANK_RELATIVE)
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
index afb7858..8190b9b 100644
--- a/include/drm/drmP.h
+++ b/include/drm/drmP.h
@@ -545,13 +545,6 @@
 	struct drm_file *tag;		/**< associated fd private data */
 };
 
-struct drm_vbl_sig {
-	struct list_head head;
-	unsigned int sequence;
-	struct siginfo info;
-	struct task_struct *task;
-};
-
 /* location of GART table */
 #define DRM_ATI_GART_MAIN 1
 #define DRM_ATI_GART_FB   2
@@ -903,8 +896,6 @@
 	wait_queue_head_t *vbl_queue;   /**< VBLANK wait queue */
 	atomic_t *_vblank_count;        /**< number of VBLANK interrupts (driver must alloc the right number of counters) */
 	spinlock_t vbl_lock;
-	struct list_head *vbl_sigs;	/**< signal list to send on VBLANK */
-	atomic_t vbl_signal_pending;    /* number of signals pending on all crtcs*/
 	atomic_t *vblank_refcount;      /* number of users of vblank interruptsper crtc */
 	u32 *last_vblank;               /* protected by dev->vbl_lock, used */
 					/* for wraparound handling */
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 0acb07f..d54de24 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -395,7 +395,7 @@
 	void (*save)(struct drm_connector *connector);
 	void (*restore)(struct drm_connector *connector);
 	enum drm_connector_status (*detect)(struct drm_connector *connector);
-	void (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height);
+	int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height);
 	int (*set_property)(struct drm_connector *connector, struct drm_property *property,
 			     uint64_t val);
 	void (*destroy)(struct drm_connector *connector);
@@ -528,7 +528,8 @@
  *
  */
 struct drm_mode_config {
-	struct mutex mutex; /* protects configuration and IDR */
+	struct mutex mutex; /* protects configuration (mode lists etc.) */
+	struct mutex idr_mutex; /* for IDR management */
 	struct idr crtc_idr; /* use this idr for all IDs, fb, crtc, connector, modes - just makes life easier */
 	/* this is limited to one for now */
 	int num_fb;
diff --git a/include/drm/drm_crtc_helper.h b/include/drm/drm_crtc_helper.h
index 4bc04cf..0c6f0e1 100644
--- a/include/drm/drm_crtc_helper.h
+++ b/include/drm/drm_crtc_helper.h
@@ -88,7 +88,7 @@
 	struct drm_encoder *(*best_encoder)(struct drm_connector *connector);
 };
 
-extern void drm_helper_probe_single_connector_modes(struct drm_connector *connector, uint32_t maxX, uint32_t maxY);
+extern int drm_helper_probe_single_connector_modes(struct drm_connector *connector, uint32_t maxX, uint32_t maxY);
 extern void drm_helper_disable_unused_functions(struct drm_device *dev);
 extern int drm_helper_hotplug_stage_two(struct drm_device *dev);
 extern bool drm_helper_initial_config(struct drm_device *dev, bool can_grow);
diff --git a/include/linux/agpgart.h b/include/linux/agpgart.h
index c8fdb6e..110c600 100644
--- a/include/linux/agpgart.h
+++ b/include/linux/agpgart.h
@@ -52,7 +52,6 @@
 
 #ifndef __KERNEL__
 #include <linux/types.h>
-#include <asm/types.h>
 
 struct agp_version {
 	__u16 major;
diff --git a/include/linux/atm_idt77105.h b/include/linux/atm_idt77105.h
index 05621cf..8b72400 100644
--- a/include/linux/atm_idt77105.h
+++ b/include/linux/atm_idt77105.h
@@ -7,7 +7,7 @@
 #ifndef LINUX_ATM_IDT77105_H
 #define LINUX_ATM_IDT77105_H
 
-#include <asm/types.h>
+#include <linux/types.h>
 #include <linux/atmioc.h>
 #include <linux/atmdev.h>
 
diff --git a/include/linux/capi.h b/include/linux/capi.h
index fdebaaa..65100d6 100644
--- a/include/linux/capi.h
+++ b/include/linux/capi.h
@@ -12,7 +12,7 @@
 #ifndef __LINUX_CAPI_H__
 #define __LINUX_CAPI_H__
 
-#include <asm/types.h>
+#include <linux/types.h>
 #include <linux/ioctl.h>
 #ifndef __KERNEL__
 #include <linux/kernelcapi.h>
diff --git a/include/linux/compat.h b/include/linux/compat.h
index e88f3ec..3fd2194 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -280,5 +280,18 @@
 asmlinkage long compat_sys_timerfd_gettime(int ufd,
 				   struct compat_itimerspec __user *otmr);
 
+asmlinkage long compat_sys_move_pages(pid_t pid, unsigned long nr_page,
+				      __u32 __user *pages,
+				      const int __user *nodes,
+				      int __user *status,
+				      int flags);
+asmlinkage long compat_sys_futimesat(unsigned int dfd, char __user *filename,
+				     struct compat_timeval __user *t);
+asmlinkage long compat_sys_newfstatat(unsigned int dfd, char __user * filename,
+				      struct compat_stat __user *statbuf,
+				      int flag);
+asmlinkage long compat_sys_openat(unsigned int dfd, const char __user *filename,
+				  int flags, int mode);
+
 #endif /* CONFIG_COMPAT */
 #endif /* _LINUX_COMPAT_H */
diff --git a/include/linux/connector.h b/include/linux/connector.h
index 5c7f946..34f2789 100644
--- a/include/linux/connector.h
+++ b/include/linux/connector.h
@@ -22,7 +22,7 @@
 #ifndef __CONNECTOR_H
 #define __CONNECTOR_H
 
-#include <asm/types.h>
+#include <linux/types.h>
 
 #define CN_IDX_CONNECTOR		0xffffffff
 #define CN_VAL_CONNECTOR		0xffffffff
diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h
index 2d3d1e0..d06fbf2 100644
--- a/include/linux/cyclades.h
+++ b/include/linux/cyclades.h
@@ -150,8 +150,6 @@
  *	architectures and compilers.
  */
 
-#include <asm/types.h>
-
 typedef __u64  ucdouble;		/* 64 bits, unsigned */
 typedef __u32  uclong;			/* 32 bits, unsigned */
 typedef __u16  ucshort;		/* 16 bits, unsigned */
diff --git a/include/linux/debugfs.h b/include/linux/debugfs.h
index 23936b1..af0e01d 100644
--- a/include/linux/debugfs.h
+++ b/include/linux/debugfs.h
@@ -162,6 +162,13 @@
 	return ERR_PTR(-ENODEV);
 }
 
+static inline struct dentry *debugfs_create_size_t(const char *name, mode_t mode,
+				     struct dentry *parent,
+				     size_t *value)
+{
+	return ERR_PTR(-ENODEV);
+}
+
 static inline struct dentry *debugfs_create_bool(const char *name, mode_t mode,
 						 struct dentry *parent,
 						 u32 *value)
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index c73f1e2..3e0f64c 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -297,6 +297,11 @@
 	tx->flags |= DMA_CTRL_ACK;
 }
 
+static inline void async_tx_clear_ack(struct dma_async_tx_descriptor *tx)
+{
+	tx->flags &= ~DMA_CTRL_ACK;
+}
+
 static inline bool async_tx_test_ack(struct dma_async_tx_descriptor *tx)
 {
 	return (tx->flags & DMA_CTRL_ACK) == DMA_CTRL_ACK;
@@ -400,11 +405,16 @@
 enum dma_status dma_sync_wait(struct dma_chan *chan, dma_cookie_t cookie);
 #ifdef CONFIG_DMA_ENGINE
 enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx);
+void dma_issue_pending_all(void);
 #else
 static inline enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx)
 {
 	return DMA_SUCCESS;
 }
+static inline void dma_issue_pending_all(void)
+{
+	do { } while (0);
+}
 #endif
 
 /* --- DMA device --- */
@@ -413,7 +423,6 @@
 void dma_async_device_unregister(struct dma_device *device);
 void dma_run_dependencies(struct dma_async_tx_descriptor *tx);
 struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type);
-void dma_issue_pending_all(void);
 #define dma_request_channel(mask, x, y) __dma_request_channel(&(mask), x, y)
 struct dma_chan *__dma_request_channel(dma_cap_mask_t *mask, dma_filter_fn fn, void *fn_param);
 void dma_release_channel(struct dma_chan *chan);
diff --git a/include/linux/dmi.h b/include/linux/dmi.h
index 3416190..d741b9c 100644
--- a/include/linux/dmi.h
+++ b/include/linux/dmi.h
@@ -38,6 +38,7 @@
 #ifdef CONFIG_DMI
 
 extern int dmi_check_system(const struct dmi_system_id *list);
+const struct dmi_system_id *dmi_first_match(const struct dmi_system_id *list);
 extern const char * dmi_get_system_info(int field);
 extern const struct dmi_device * dmi_find_device(int type, const char *name,
 	const struct dmi_device *from);
@@ -64,6 +65,8 @@
 	{ return -1; }
 static inline bool dmi_match(enum dmi_field f, const char *str)
 	{ return false; }
+static inline const struct dmi_system_id *
+	dmi_first_match(const struct dmi_system_id *list) { return NULL; }
 
 #endif
 
diff --git a/include/linux/fb.h b/include/linux/fb.h
index 1ee63df..818fe21 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -1,7 +1,7 @@
 #ifndef _LINUX_FB_H
 #define _LINUX_FB_H
 
-#include <asm/types.h>
+#include <linux/types.h>
 #include <linux/i2c.h>
 
 struct dentry;
diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h
index 01d67ba..1ffc23bc 100644
--- a/include/linux/i2c-id.h
+++ b/include/linux/i2c-id.h
@@ -40,9 +40,7 @@
 #define I2C_DRIVERID_SAA7185B	13	/* video encoder		*/
 #define I2C_DRIVERID_SAA7110	22	/* video decoder		*/
 #define I2C_DRIVERID_SAA5249	24	/* SAA5249 and compatibles	*/
-#define I2C_DRIVERID_PCF8583	25	/* real time clock		*/
 #define I2C_DRIVERID_TDA7432	27	/* Stereo sound processor	*/
-#define I2C_DRIVERID_TVMIXER    28      /* Mixer driver for tv cards    */
 #define I2C_DRIVERID_TVAUDIO    29      /* Generic TV sound driver      */
 #define I2C_DRIVERID_TDA9875    32      /* TV sound decoder chip        */
 #define I2C_DRIVERID_BT819	40     /* video decoder			*/
@@ -54,7 +52,6 @@
 #define I2C_DRIVERID_SAA7191	57	/* video decoder		*/
 #define I2C_DRIVERID_INDYCAM	58	/* SGI IndyCam			*/
 #define I2C_DRIVERID_OVCAMCHIP	61	/* OmniVision CMOS image sens.	*/
-#define I2C_DRIVERID_MAX6900	63	/* MAX6900 real-time clock	*/
 #define I2C_DRIVERID_SAA6752HS	67	/* MPEG2 encoder		*/
 #define I2C_DRIVERID_TVEEPROM	68	/* TV EEPROM			*/
 #define I2C_DRIVERID_WM8775	69	/* wm8775 audio processor	*/
@@ -62,23 +59,16 @@
 #define I2C_DRIVERID_CX25840	71	/* cx2584x video encoder	*/
 #define I2C_DRIVERID_SAA7127	72	/* saa7127 video encoder	*/
 #define I2C_DRIVERID_SAA711X	73	/* saa711x video encoders	*/
-#define I2C_DRIVERID_AKITAIOEXP	74	/* IO Expander on Sharp SL-C1000 */
 #define I2C_DRIVERID_INFRARED	75	/* I2C InfraRed on Video boards */
 #define I2C_DRIVERID_TVP5150	76	/* TVP5150 video decoder        */
 #define I2C_DRIVERID_WM8739	77	/* wm8739 audio processor	*/
 #define I2C_DRIVERID_UPD64083	78	/* upd64083 video processor	*/
 #define I2C_DRIVERID_UPD64031A	79	/* upd64031a video processor	*/
 #define I2C_DRIVERID_SAA717X	80	/* saa717x video encoder	*/
-#define I2C_DRIVERID_DS1672	81	/* Dallas/Maxim DS1672 RTC	*/
 #define I2C_DRIVERID_BT866	85	/* Conexant bt866 video encoder */
 #define I2C_DRIVERID_KS0127	86	/* Samsung ks0127 video decoder */
 #define I2C_DRIVERID_TLV320AIC23B 87	/* TI TLV320AIC23B audio codec  */
-#define I2C_DRIVERID_WM8731	89	/* Wolfson WM8731 audio codec */
-#define I2C_DRIVERID_WM8750	90	/* Wolfson WM8750 audio codec */
-#define I2C_DRIVERID_WM8753	91	/* Wolfson WM8753 audio codec */
-#define I2C_DRIVERID_LM4857 	92 	/* LM4857 Audio Amplifier */
 #define I2C_DRIVERID_VP27SMPX	93	/* Panasonic VP27s tuner internal MPX */
-#define I2C_DRIVERID_CS4270	94	/* Cirrus Logic 4270 audio codec */
 #define I2C_DRIVERID_M52790 	95      /* Mitsubishi M52790SP/FP AV switch */
 #define I2C_DRIVERID_CS5345	96	/* cs5345 audio processor	*/
 
@@ -89,74 +79,23 @@
  */
 
 /* --- Bit algorithm adapters						*/
-#define I2C_HW_B_LP		0x010000 /* Parallel port Philips style */
 #define I2C_HW_B_BT848		0x010005 /* BT848 video boards */
-#define I2C_HW_B_VIA		0x010007 /* Via vt82c586b */
-#define I2C_HW_B_HYDRA		0x010008 /* Apple Hydra Mac I/O */
-#define I2C_HW_B_I810		0x01000a /* Intel I810 */
-#define I2C_HW_B_VOO		0x01000b /* 3dfx Voodoo 3 / Banshee */
-#define I2C_HW_B_SCX200		0x01000e /* Nat'l Semi SCx200 I2C */
 #define I2C_HW_B_RIVA		0x010010 /* Riva based graphics cards */
-#define I2C_HW_B_IOC		0x010011 /* IOC bit-wiggling */
-#define I2C_HW_B_IXP2000	0x010016 /* GPIO on IXP2000 systems */
 #define I2C_HW_B_ZR36067	0x010019 /* Zoran-36057/36067 based boards */
-#define I2C_HW_B_PCILYNX	0x01001a /* TI PCILynx I2C adapter */
 #define I2C_HW_B_CX2388x	0x01001b /* connexant 2388x based tv cards */
-#define I2C_HW_B_NVIDIA		0x01001c /* nvidia framebuffer driver */
-#define I2C_HW_B_SAVAGE		0x01001d /* savage framebuffer driver */
-#define I2C_HW_B_RADEON		0x01001e /* radeon framebuffer driver */
 #define I2C_HW_B_EM28XX		0x01001f /* em28xx video capture cards */
 #define I2C_HW_B_CX2341X	0x010020 /* Conexant CX2341X MPEG encoder cards */
-#define I2C_HW_B_INTELFB	0x010021 /* intel framebuffer driver */
 #define I2C_HW_B_CX23885	0x010022 /* conexant 23885 based tv cards (bus1) */
 #define I2C_HW_B_AU0828		0x010023 /* auvitek au0828 usb bridge */
 
-/* --- PCF 8584 based algorithms					*/
-#define I2C_HW_P_ELEK		0x020002 /* Elektor ISA Bus inteface card */
-
-/* --- PCA 9564 based algorithms */
-#define I2C_HW_A_ISA		0x1a0000 /* generic ISA Bus interface card */
-
-/* --- PowerPC on-chip adapters						*/
-#define I2C_HW_OCP		0x120000 /* IBM on-chip I2C adapter */
-
-/* --- Broadcom SiByte adapters						*/
-#define I2C_HW_SIBYTE		0x150000
-
 /* --- SGI adapters							*/
 #define I2C_HW_SGI_VINO		0x160000
 
-/* --- XSCALE on-chip adapters                          */
-#define I2C_HW_IOP3XX		0x140000
-
-/* --- Au1550 PSC adapters adapters					*/
-#define I2C_HW_AU1550_PSC	0x1b0000
-
 /* --- SMBus only adapters						*/
-#define I2C_HW_SMBUS_PIIX4	0x040000
-#define I2C_HW_SMBUS_ALI15X3	0x040001
-#define I2C_HW_SMBUS_VIA2	0x040002
-#define I2C_HW_SMBUS_I801	0x040004
-#define I2C_HW_SMBUS_AMD756	0x040005
-#define I2C_HW_SMBUS_SIS5595	0x040006
-#define I2C_HW_SMBUS_ALI1535	0x040007
-#define I2C_HW_SMBUS_SIS630	0x040008
-#define I2C_HW_SMBUS_SIS96X	0x040009
-#define I2C_HW_SMBUS_AMD8111	0x04000a
-#define I2C_HW_SMBUS_SCX200	0x04000b
-#define I2C_HW_SMBUS_NFORCE2	0x04000c
 #define I2C_HW_SMBUS_W9968CF	0x04000d
 #define I2C_HW_SMBUS_OV511	0x04000e /* OV511(+) USB 1.1 webcam ICs */
 #define I2C_HW_SMBUS_OV518	0x04000f /* OV518(+) USB 1.1 webcam ICs */
 #define I2C_HW_SMBUS_CAFE	0x040012 /* Marvell 88ALP01 "CAFE" cam  */
-#define I2C_HW_SMBUS_ALI1563	0x040013
-
-/* --- MCP107 adapter */
-#define I2C_HW_MPC107		0x0d0000
-
-/* --- Embedded adapters */
-#define I2C_HW_MV64XXX		0x190000
-#define I2C_HW_BLACKFIN		0x190001 /* ADI Blackfin I2C TWI driver */
 
 /* --- Miscellaneous adapters */
 #define I2C_HW_SAA7146		0x060000 /* SAA7146 video decoder bus */
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 20873d4..fcfbfea 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -151,7 +151,7 @@
 	 * has been dynamically allocated by the driver in the function above,
 	 * it must be freed here.  (LEGACY I2C DRIVERS ONLY)
 	 */
-	int (*detach_client)(struct i2c_client *);
+	int (*detach_client)(struct i2c_client *) __deprecated;
 
 	/* Standard driver model interfaces, for "new style" i2c drivers.
 	 * With the driver model, device enumeration is NEVER done by drivers;
@@ -429,8 +429,10 @@
 	return i2c_register_driver(THIS_MODULE, driver);
 }
 
-extern int i2c_attach_client(struct i2c_client *);
-extern int i2c_detach_client(struct i2c_client *);
+/* These are deprecated, your driver should use the standard .probe()
+ * and .remove() methods instead. */
+extern int __deprecated i2c_attach_client(struct i2c_client *);
+extern int __deprecated i2c_detach_client(struct i2c_client *);
 
 extern struct i2c_client *i2c_use_client(struct i2c_client *client);
 extern void i2c_release_client(struct i2c_client *client);
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 3644f63..194da5a 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -871,7 +871,7 @@
 	ide_hwif_t	*cur_port;	/* for hosts requiring serialization */
 
 	/* used for hosts requiring serialization */
-	volatile long	host_busy;
+	volatile unsigned long	host_busy;
 };
 
 #define IDE_HOST_BUSY 0
diff --git a/include/linux/if_frad.h b/include/linux/if_frad.h
index 5c34240..60e16a5 100644
--- a/include/linux/if_frad.h
+++ b/include/linux/if_frad.h
@@ -26,8 +26,6 @@
 
 #include <linux/if.h>
 
-#if defined(CONFIG_DLCI) || defined(CONFIG_DLCI_MODULE)
-
 /* Structures and constants associated with the DLCI device driver */
 
 struct dlci_add
@@ -127,6 +125,8 @@
 
 #ifdef __KERNEL__
 
+#if defined(CONFIG_DLCI) || defined(CONFIG_DLCI_MODULE)
+
 /* these are the fields of an RFC 1490 header */
 struct frhdr
 {
@@ -190,12 +190,10 @@
    int               buffer;		/* current buffer for S508 firmware */
 };
 
-#endif /* __KERNEL__ */
-
 #endif /* CONFIG_DLCI || CONFIG_DLCI_MODULE */
 
-#ifdef __KERNEL__
 extern void dlci_ioctl_set(int (*hook)(unsigned int, void __user *));
-#endif
+
+#endif /* __KERNEL__ */
 
 #endif
diff --git a/include/linux/if_pppol2tp.h b/include/linux/if_pppol2tp.h
index a7d6a22..c7a6688 100644
--- a/include/linux/if_pppol2tp.h
+++ b/include/linux/if_pppol2tp.h
@@ -15,7 +15,7 @@
 #ifndef __LINUX_IF_PPPOL2TP_H
 #define __LINUX_IF_PPPOL2TP_H
 
-#include <asm/types.h>
+#include <linux/types.h>
 
 #ifdef __KERNEL__
 #include <linux/in.h>
diff --git a/include/linux/if_pppox.h b/include/linux/if_pppox.h
index 6fb7f17..30c88b2 100644
--- a/include/linux/if_pppox.h
+++ b/include/linux/if_pppox.h
@@ -17,7 +17,7 @@
 #define __LINUX_IF_PPPOX_H
 
 
-#include <asm/types.h>
+#include <linux/types.h>
 #include <asm/byteorder.h>
 
 #ifdef  __KERNEL__
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index 2f3c2d4..ea0ea1a 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -48,6 +48,12 @@
 	.posix_timers	 = LIST_HEAD_INIT(sig.posix_timers),		\
 	.cpu_timers	= INIT_CPU_TIMERS(sig.cpu_timers),		\
 	.rlim		= INIT_RLIMITS,					\
+	.cputime	= { .totals = {					\
+		.utime = cputime_zero,					\
+		.stime = cputime_zero,					\
+		.sum_exec_runtime = 0,					\
+		.lock = __SPIN_LOCK_UNLOCKED(sig.cputime.totals.lock),	\
+	}, },								\
 }
 
 extern struct nsproxy init_nsproxy;
diff --git a/include/linux/input.h b/include/linux/input.h
index 9a6355f..1249a0c 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -16,7 +16,7 @@
 #include <sys/time.h>
 #include <sys/ioctl.h>
 #include <sys/types.h>
-#include <asm/types.h>
+#include <linux/types.h>
 #endif
 
 /*
diff --git a/include/linux/ioport.h b/include/linux/ioport.h
index f6bb2ca..32e4b2f 100644
--- a/include/linux/ioport.h
+++ b/include/linux/ioport.h
@@ -143,7 +143,8 @@
 
 extern struct resource * __request_region(struct resource *,
 					resource_size_t start,
-					resource_size_t n, const char *name, int relaxed);
+					resource_size_t n,
+					const char *name, int flags);
 
 /* Compatibility cruft */
 #define release_region(start,n)	__release_region(&ioport_resource, (start), (n))
diff --git a/include/linux/jbd.h b/include/linux/jbd.h
index 6384b19..64246dc 100644
--- a/include/linux/jbd.h
+++ b/include/linux/jbd.h
@@ -614,6 +614,8 @@
  * @j_wbufsize: maximum number of buffer_heads allowed in j_wbuf, the
  *	number that will fit in j_blocksize
  * @j_last_sync_writer: most recent pid which did a synchronous write
+ * @j_average_commit_time: the average amount of time in nanoseconds it
+ *	takes to commit a transaction to the disk.
  * @j_private: An opaque pointer to fs-private information.
  */
 
diff --git a/include/linux/joystick.h b/include/linux/joystick.h
index b5e0512..9e20c29 100644
--- a/include/linux/joystick.h
+++ b/include/linux/joystick.h
@@ -27,7 +27,7 @@
  * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic
  */
 
-#include <asm/types.h>
+#include <linux/types.h>
 #include <linux/input.h>
 
 /*
diff --git a/include/linux/klist.h b/include/linux/klist.h
index d5a27af..e91a4e5 100644
--- a/include/linux/klist.h
+++ b/include/linux/klist.h
@@ -22,7 +22,7 @@
 	struct list_head	k_list;
 	void			(*get)(struct klist_node *);
 	void			(*put)(struct klist_node *);
-};
+} __attribute__ ((aligned (4)));
 
 #define KLIST_INIT(_name, _get, _put)					\
 	{ .k_lock	= __SPIN_LOCK_UNLOCKED(_name.k_lock),		\
diff --git a/include/linux/kvm.h b/include/linux/kvm.h
index 35525ac..5715f19 100644
--- a/include/linux/kvm.h
+++ b/include/linux/kvm.h
@@ -7,7 +7,7 @@
  * Note: you must update KVM_API_VERSION if you change this interface.
  */
 
-#include <asm/types.h>
+#include <linux/types.h>
 #include <linux/compiler.h>
 #include <linux/ioctl.h>
 #include <asm/kvm.h>
diff --git a/include/linux/libata.h b/include/linux/libata.h
index b6b8a7f..bca3ba2 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -187,6 +187,8 @@
 	ATA_FLAG_PIO_POLLING	= (1 << 9), /* use polling PIO if LLD
 					     * doesn't handle PIO interrupts */
 	ATA_FLAG_NCQ		= (1 << 10), /* host supports NCQ */
+	ATA_FLAG_NO_POWEROFF_SPINDOWN = (1 << 11), /* don't spindown before poweroff */
+	ATA_FLAG_NO_HIBERNATE_SPINDOWN = (1 << 12), /* don't spindown before hibernation */
 	ATA_FLAG_DEBUGMSG	= (1 << 13),
 	ATA_FLAG_IGN_SIMPLEX	= (1 << 15), /* ignore SIMPLEX */
 	ATA_FLAG_NO_IORDY	= (1 << 16), /* controller lacks iordy */
@@ -401,12 +403,14 @@
 				  ATA_TIMING_CYC8B,
 	ATA_TIMING_ACTIVE	= (1 << 4),
 	ATA_TIMING_RECOVER	= (1 << 5),
-	ATA_TIMING_CYCLE	= (1 << 6),
-	ATA_TIMING_UDMA		= (1 << 7),
+	ATA_TIMING_DMACK_HOLD	= (1 << 6),
+	ATA_TIMING_CYCLE	= (1 << 7),
+	ATA_TIMING_UDMA		= (1 << 8),
 	ATA_TIMING_ALL		= ATA_TIMING_SETUP | ATA_TIMING_ACT8B |
 				  ATA_TIMING_REC8B | ATA_TIMING_CYC8B |
 				  ATA_TIMING_ACTIVE | ATA_TIMING_RECOVER |
-				  ATA_TIMING_CYCLE | ATA_TIMING_UDMA,
+				  ATA_TIMING_DMACK_HOLD | ATA_TIMING_CYCLE |
+				  ATA_TIMING_UDMA,
 };
 
 enum ata_xfer_mask {
@@ -866,6 +870,7 @@
 	unsigned short cyc8b;		/* t0 for 8-bit I/O */
 	unsigned short active;		/* t2 or tD */
 	unsigned short recover;		/* t2i or tK */
+	unsigned short dmack_hold;	/* tj */
 	unsigned short cycle;		/* t0 */
 	unsigned short udma;		/* t2CYCTYP/2 */
 };
@@ -927,6 +932,8 @@
 extern int ata_scsi_detect(struct scsi_host_template *sht);
 extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg);
 extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *));
+extern int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *dev,
+			    int cmd, void __user *arg);
 extern void ata_sas_port_destroy(struct ata_port *);
 extern struct ata_port *ata_sas_port_alloc(struct ata_host *,
 					   struct ata_port_info *, struct Scsi_Host *);
diff --git a/include/linux/loop.h b/include/linux/loop.h
index 46169a7..6ffd6db 100644
--- a/include/linux/loop.h
+++ b/include/linux/loop.h
@@ -80,7 +80,7 @@
 };
 
 #include <asm/posix_types.h>	/* for __kernel_old_dev_t */
-#include <asm/types.h>		/* for __u64 */
+#include <linux/types.h>	/* for __u64 */
 
 /* Backwards compatibility version */
 struct loop_info {
diff --git a/include/linux/magic.h b/include/linux/magic.h
index 439f6f3..0b4df7e 100644
--- a/include/linux/magic.h
+++ b/include/linux/magic.h
@@ -10,11 +10,13 @@
 #define SYSFS_MAGIC		0x62656572
 #define SECURITYFS_MAGIC	0x73636673
 #define TMPFS_MAGIC		0x01021994
+#define SQUASHFS_MAGIC		0x73717368
 #define EFS_SUPER_MAGIC		0x414A53
 #define EXT2_SUPER_MAGIC	0xEF53
 #define EXT3_SUPER_MAGIC	0xEF53
 #define XENFS_SUPER_MAGIC	0xabba1974
 #define EXT4_SUPER_MAGIC	0xEF53
+#define BTRFS_SUPER_MAGIC	0x9123683E
 #define HPFS_SUPER_MAGIC	0xf995e849
 #define ISOFS_SUPER_MAGIC	0x9660
 #define JFFS2_SUPER_MAGIC	0x72b6
diff --git a/include/linux/matroxfb.h b/include/linux/matroxfb.h
index ae5b094..404f678 100644
--- a/include/linux/matroxfb.h
+++ b/include/linux/matroxfb.h
@@ -2,7 +2,7 @@
 #define __LINUX_MATROXFB_H__
 
 #include <asm/ioctl.h>
-#include <asm/types.h>
+#include <linux/types.h>
 #include <linux/videodev2.h>
 
 struct matroxioc_output_mode {
diff --git a/include/linux/mm.h b/include/linux/mm.h
index b91a73f..e8ddc98 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -260,7 +260,6 @@
  */
 static inline int get_page_unless_zero(struct page *page)
 {
-	VM_BUG_ON(PageTail(page));
 	return atomic_inc_not_zero(&page->_count);
 }
 
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 97b91d1..fde8667 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -443,6 +443,13 @@
 	struct dmi_strmatch matches[4];
 	void *driver_data;
 };
+/*
+ * struct dmi_device_id appears during expansion of
+ * "MODULE_DEVICE_TABLE(dmi, x)". Compiler doesn't look inside it
+ * but this is enough for gcc 3.4.6 to error out:
+ *	error: storage size of '__mod_dmi_device_table' isn't known
+ */
+#define dmi_device_id dmi_system_id
 #endif
 
 #define DMI_MATCH(a, b)	{ a, b }
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index f245568..ec54785 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -467,7 +467,7 @@
  *     This function is called when network device transistions to the down
  *     state.
  *
- * int (*ndo_hard_start_xmit)(struct sk_buff *skb, struct net_device *dev);
+ * int (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev);
  *	Called when a packet needs to be transmitted.
  *	Must return NETDEV_TX_OK , NETDEV_TX_BUSY, or NETDEV_TX_LOCKED,
  *	Required can not be NULL.
@@ -795,6 +795,7 @@
 	       NETREG_UNREGISTERING,	/* called unregister_netdevice */
 	       NETREG_UNREGISTERED,	/* completed unregister todo */
 	       NETREG_RELEASED,		/* called free_netdev */
+	       NETREG_DUMMY,		/* dummy device for NAPI poll */
 	} reg_state;
 
 	/* Called from unregister, can be used to call free_netdev */
@@ -1077,6 +1078,8 @@
 extern void		synchronize_net(void);
 extern int 		register_netdevice_notifier(struct notifier_block *nb);
 extern int		unregister_netdevice_notifier(struct notifier_block *nb);
+extern int		init_dummy_netdev(struct net_device *dev);
+
 extern int call_netdevice_notifiers(unsigned long val, struct net_device *dev);
 extern struct net_device	*dev_get_by_index(struct net *net, int ifindex);
 extern struct net_device	*__dev_get_by_index(struct net *net, int ifindex);
diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h
index e52ce47..c7ee874 100644
--- a/include/linux/netfilter/x_tables.h
+++ b/include/linux/netfilter/x_tables.h
@@ -270,6 +270,7 @@
 	struct list_head list;
 
 	const char name[XT_FUNCTION_MAXNAMELEN-1];
+	u_int8_t revision;
 
 	/* Return true or false: return FALSE and set *hotdrop = 1 to
            force immediate packet drop. */
@@ -302,7 +303,6 @@
 	unsigned short proto;
 
 	unsigned short family;
-	u_int8_t revision;
 };
 
 /* Registration hooks for targets. */
diff --git a/include/linux/of_i2c.h b/include/linux/of_i2c.h
index bd2a870..34974b5 100644
--- a/include/linux/of_i2c.h
+++ b/include/linux/of_i2c.h
@@ -17,4 +17,7 @@
 void of_register_i2c_devices(struct i2c_adapter *adap,
 			     struct device_node *adap_node);
 
+/* must call put_device() when done with returned i2c_client device */
+struct i2c_client *of_find_i2c_device_by_node(struct device_node *node);
+
 #endif /* __LINUX_OF_I2C_H */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 80f8b8b..48890cf 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -117,6 +117,10 @@
 #define PCI_UNKNOWN	((pci_power_t __force) 5)
 #define PCI_POWER_ERROR	((pci_power_t __force) -1)
 
+#define PCI_PM_D2_DELAY	200
+#define PCI_PM_D3_WAIT	10
+#define PCI_PM_BUS_WAIT	50
+
 /** The pci_channel state describes connectivity between the CPU and
  *  the pci device.  If some PCI bus between here and the pci device
  *  has crashed or locked up, this info is reflected here.
@@ -252,6 +256,7 @@
 	unsigned int	ari_enabled:1;	/* ARI forwarding */
 	unsigned int	is_managed:1;
 	unsigned int	is_pcie:1;
+	unsigned int	state_saved:1;
 	pci_dev_flags_t dev_flags;
 	atomic_t	enable_cnt;	/* pci_enable_device has been called */
 
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index d543365..88152e5 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1357,6 +1357,7 @@
 #define PCI_DEVICE_ID_VIA_8783_0	0x3208
 #define PCI_DEVICE_ID_VIA_8237		0x3227
 #define PCI_DEVICE_ID_VIA_8251		0x3287
+#define PCI_DEVICE_ID_VIA_8261		0x3402
 #define PCI_DEVICE_ID_VIA_8237A		0x3337
 #define PCI_DEVICE_ID_VIA_8237S		0x3372
 #define PCI_DEVICE_ID_VIA_SATA_EIDE	0x5324
@@ -1366,10 +1367,13 @@
 #define PCI_DEVICE_ID_VIA_CX700		0x8324
 #define PCI_DEVICE_ID_VIA_CX700_IDE	0x0581
 #define PCI_DEVICE_ID_VIA_VX800		0x8353
+#define PCI_DEVICE_ID_VIA_VX855		0x8409
 #define PCI_DEVICE_ID_VIA_8371_1	0x8391
 #define PCI_DEVICE_ID_VIA_82C598_1	0x8598
 #define PCI_DEVICE_ID_VIA_838X_1	0xB188
 #define PCI_DEVICE_ID_VIA_83_87XX_1	0xB198
+#define PCI_DEVICE_ID_VIA_C409_IDE	0XC409
+#define PCI_DEVICE_ID_VIA_ANON		0xFFFF
 
 #define PCI_VENDOR_ID_SIEMENS           0x110A
 #define PCI_DEVICE_ID_SIEMENS_DSCC4     0x2102
@@ -2106,6 +2110,8 @@
 #define PCI_DEVICE_ID_MELLANOX_SINAI_OLD 0x5e8c
 #define PCI_DEVICE_ID_MELLANOX_SINAI	0x6274
 
+#define PCI_VENDOR_ID_DFI		0x15bd
+
 #define PCI_VENDOR_ID_QUICKNET		0x15e2
 #define PCI_DEVICE_ID_QUICKNET_XJ	0x0500
 
@@ -2174,6 +2180,7 @@
 #define PCI_DEVICE_ID_RDC_R6040		0x6040
 #define PCI_DEVICE_ID_RDC_R6060		0x6060
 #define PCI_DEVICE_ID_RDC_R6061		0x6061
+#define PCI_DEVICE_ID_RDC_D1010		0x1010
 
 #define PCI_VENDOR_ID_LENOVO		0x17aa
 
diff --git a/include/linux/phantom.h b/include/linux/phantom.h
index 02268c5..94dd664 100644
--- a/include/linux/phantom.h
+++ b/include/linux/phantom.h
@@ -10,7 +10,7 @@
 #ifndef __PHANTOM_H
 #define __PHANTOM_H
 
-#include <asm/types.h>
+#include <linux/types.h>
 
 /* PHN_(G/S)ET_REG param */
 struct phm_reg {
diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h
index 21b781a..0b35b3a 100644
--- a/include/linux/quotaops.h
+++ b/include/linux/quotaops.h
@@ -24,10 +24,8 @@
 
 int dquot_initialize(struct inode *inode, int type);
 int dquot_drop(struct inode *inode);
-int dquot_drop_locked(struct inode *inode);
 struct dquot *dqget(struct super_block *sb, unsigned int id, int type);
 void dqput(struct dquot *dquot);
-int dquot_is_cached(struct super_block *sb, unsigned int id, int type);
 int dquot_scan_active(struct super_block *sb,
 		      int (*fn)(struct dquot *dquot, unsigned long priv),
 		      unsigned long priv);
diff --git a/include/linux/radeonfb.h b/include/linux/radeonfb.h
index 5bd8975..8c4bbde 100644
--- a/include/linux/radeonfb.h
+++ b/include/linux/radeonfb.h
@@ -2,7 +2,7 @@
 #define __LINUX_RADEONFB_H__
 
 #include <asm/ioctl.h>
-#include <asm/types.h>
+#include <linux/types.h>
 
 #define ATY_RADEON_LCD_ON	0x00000001
 #define ATY_RADEON_CRT_ON	0x00000002
diff --git a/include/linux/res_counter.h b/include/linux/res_counter.h
index dede0a2..4c5bcf6 100644
--- a/include/linux/res_counter.h
+++ b/include/linux/res_counter.h
@@ -9,7 +9,7 @@
  *
  * Author: Pavel Emelianov <xemul@openvz.org>
  *
- * See Documentation/controllers/resource_counter.txt for more
+ * See Documentation/cgroups/resource_counter.txt for more
  * info about what this counter is.
  */
 
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 4cae9b8..02e16d2 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -293,6 +293,9 @@
 extern void softlockup_tick(void);
 extern void touch_softlockup_watchdog(void);
 extern void touch_all_softlockup_watchdogs(void);
+extern int proc_dosoftlockup_thresh(struct ctl_table *table, int write,
+				    struct file *filp, void __user *buffer,
+				    size_t *lenp, loff_t *ppos);
 extern unsigned int  softlockup_panic;
 extern unsigned long sysctl_hung_task_check_count;
 extern unsigned long sysctl_hung_task_timeout_secs;
@@ -450,6 +453,7 @@
 	cputime_t utime;
 	cputime_t stime;
 	unsigned long long sum_exec_runtime;
+	spinlock_t lock;
 };
 /* Alternate field names when used to cache expirations. */
 #define prof_exp	stime
@@ -465,7 +469,7 @@
  * used for thread group CPU clock calculations.
  */
 struct thread_group_cputime {
-	struct task_cputime *totals;
+	struct task_cputime totals;
 };
 
 /*
@@ -2180,24 +2184,30 @@
  * Thread group CPU time accounting.
  */
 
-extern int thread_group_cputime_alloc(struct task_struct *);
-extern void thread_group_cputime(struct task_struct *, struct task_cputime *);
+static inline
+void thread_group_cputime(struct task_struct *tsk, struct task_cputime *times)
+{
+	struct task_cputime *totals = &tsk->signal->cputime.totals;
+	unsigned long flags;
+
+	spin_lock_irqsave(&totals->lock, flags);
+	*times = *totals;
+	spin_unlock_irqrestore(&totals->lock, flags);
+}
 
 static inline void thread_group_cputime_init(struct signal_struct *sig)
 {
-	sig->cputime.totals = NULL;
-}
+	sig->cputime.totals = (struct task_cputime){
+		.utime = cputime_zero,
+		.stime = cputime_zero,
+		.sum_exec_runtime = 0,
+	};
 
-static inline int thread_group_cputime_clone_thread(struct task_struct *curr)
-{
-	if (curr->signal->cputime.totals)
-		return 0;
-	return thread_group_cputime_alloc(curr);
+	spin_lock_init(&sig->cputime.totals.lock);
 }
 
 static inline void thread_group_cputime_free(struct signal_struct *sig)
 {
-	free_percpu(sig->cputime.totals);
 }
 
 /*
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index 2b409c4..c7d9bb18 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -237,6 +237,7 @@
 extern void hibernate_nvs_free(void);
 extern void hibernate_nvs_save(void);
 extern void hibernate_nvs_restore(void);
+extern bool system_entering_hibernation(void);
 #else /* CONFIG_HIBERNATION */
 static inline int swsusp_page_is_forbidden(struct page *p) { return 0; }
 static inline void swsusp_set_page_free(struct page *p) {}
@@ -252,6 +253,7 @@
 static inline void hibernate_nvs_free(void) {}
 static inline void hibernate_nvs_save(void) {}
 static inline void hibernate_nvs_restore(void) {}
+static inline bool system_entering_hibernation(void) { return false; }
 #endif /* CONFIG_HIBERNATION */
 
 #ifdef CONFIG_PM_SLEEP
diff --git a/include/linux/swab.h b/include/linux/swab.h
index be5284d..ea0c02f 100644
--- a/include/linux/swab.h
+++ b/include/linux/swab.h
@@ -3,7 +3,7 @@
 
 #include <linux/types.h>
 #include <linux/compiler.h>
-#include <asm/byteorder.h>
+#include <asm/swab.h>
 
 /*
  * casts are necessary for constants, because we never know how for sure
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 18d0a24..16875f8 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -54,6 +54,7 @@
 struct compat_timeval;
 struct robust_list_head;
 struct getcpu_cache;
+struct old_linux_dirent;
 
 #include <linux/types.h>
 #include <linux/aio_abi.h>
@@ -65,6 +66,74 @@
 #include <linux/quota.h>
 #include <linux/key.h>
 
+#define __SC_DECL1(t1, a1)	t1 a1
+#define __SC_DECL2(t2, a2, ...) t2 a2, __SC_DECL1(__VA_ARGS__)
+#define __SC_DECL3(t3, a3, ...) t3 a3, __SC_DECL2(__VA_ARGS__)
+#define __SC_DECL4(t4, a4, ...) t4 a4, __SC_DECL3(__VA_ARGS__)
+#define __SC_DECL5(t5, a5, ...) t5 a5, __SC_DECL4(__VA_ARGS__)
+#define __SC_DECL6(t6, a6, ...) t6 a6, __SC_DECL5(__VA_ARGS__)
+
+#define __SC_LONG1(t1, a1) 	long a1
+#define __SC_LONG2(t2, a2, ...) long a2, __SC_LONG1(__VA_ARGS__)
+#define __SC_LONG3(t3, a3, ...) long a3, __SC_LONG2(__VA_ARGS__)
+#define __SC_LONG4(t4, a4, ...) long a4, __SC_LONG3(__VA_ARGS__)
+#define __SC_LONG5(t5, a5, ...) long a5, __SC_LONG4(__VA_ARGS__)
+#define __SC_LONG6(t6, a6, ...) long a6, __SC_LONG5(__VA_ARGS__)
+
+#define __SC_CAST1(t1, a1)	(t1) a1
+#define __SC_CAST2(t2, a2, ...) (t2) a2, __SC_CAST1(__VA_ARGS__)
+#define __SC_CAST3(t3, a3, ...) (t3) a3, __SC_CAST2(__VA_ARGS__)
+#define __SC_CAST4(t4, a4, ...) (t4) a4, __SC_CAST3(__VA_ARGS__)
+#define __SC_CAST5(t5, a5, ...) (t5) a5, __SC_CAST4(__VA_ARGS__)
+#define __SC_CAST6(t6, a6, ...) (t6) a6, __SC_CAST5(__VA_ARGS__)
+
+#define __SC_TEST(type)		BUILD_BUG_ON(sizeof(type) > sizeof(long))
+#define __SC_TEST1(t1, a1)	__SC_TEST(t1)
+#define __SC_TEST2(t2, a2, ...)	__SC_TEST(t2); __SC_TEST1(__VA_ARGS__)
+#define __SC_TEST3(t3, a3, ...)	__SC_TEST(t3); __SC_TEST2(__VA_ARGS__)
+#define __SC_TEST4(t4, a4, ...)	__SC_TEST(t4); __SC_TEST3(__VA_ARGS__)
+#define __SC_TEST5(t5, a5, ...)	__SC_TEST(t5); __SC_TEST4(__VA_ARGS__)
+#define __SC_TEST6(t6, a6, ...)	__SC_TEST(t6); __SC_TEST5(__VA_ARGS__)
+
+#define SYSCALL_DEFINE0(name)   asmlinkage long sys_##name(void)
+#define SYSCALL_DEFINE1(...)    SYSCALL_DEFINEx(1, __VA_ARGS__)
+#define SYSCALL_DEFINE2(...)    SYSCALL_DEFINEx(2, __VA_ARGS__)
+#define SYSCALL_DEFINE3(...)    SYSCALL_DEFINEx(3, __VA_ARGS__)
+#define SYSCALL_DEFINE4(...)    SYSCALL_DEFINEx(4, __VA_ARGS__)
+#define SYSCALL_DEFINE5(...)    SYSCALL_DEFINEx(5, __VA_ARGS__)
+#define SYSCALL_DEFINE6(...)    SYSCALL_DEFINEx(6, __VA_ARGS__)
+
+#ifdef CONFIG_PPC64
+#define SYSCALL_ALIAS(alias, name)					\
+	asm ("\t.globl " #alias "\n\t.set " #alias ", " #name "\n"	\
+	     "\t.globl ." #alias "\n\t.set ." #alias ", ." #name)
+#else
+#define SYSCALL_ALIAS(alias, name)					\
+	asm ("\t.globl " #alias "\n\t.set " #alias ", " #name)
+#endif
+
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+
+#define SYSCALL_DEFINE(name) static inline long SYSC_##name
+#define SYSCALL_DEFINEx(x, name, ...)					\
+	asmlinkage long sys_##name(__SC_DECL##x(__VA_ARGS__));		\
+	static inline long SYSC_##name(__SC_DECL##x(__VA_ARGS__));	\
+	asmlinkage long SyS_##name(__SC_LONG##x(__VA_ARGS__))		\
+	{								\
+		__SC_TEST##x(__VA_ARGS__);				\
+		return (long) SYSC_##name(__SC_CAST##x(__VA_ARGS__));	\
+	}								\
+	SYSCALL_ALIAS(sys_##name, SyS_##name);				\
+	static inline long SYSC_##name(__SC_DECL##x(__VA_ARGS__))
+
+#else /* CONFIG_HAVE_SYSCALL_WRAPPERS */
+
+#define SYSCALL_DEFINE(name) asmlinkage long sys_##name
+#define SYSCALL_DEFINEx(x, name, ...)					\
+	asmlinkage long sys_##name(__SC_DECL##x(__VA_ARGS__))
+
+#endif /* CONFIG_HAVE_SYSCALL_WRAPPERS */
+
 asmlinkage long sys_time(time_t __user *tloc);
 asmlinkage long sys_stime(time_t __user *tptr);
 asmlinkage long sys_gettimeofday(struct timeval __user *tv,
@@ -77,7 +146,7 @@
 
 asmlinkage long sys_gettid(void);
 asmlinkage long sys_nanosleep(struct timespec __user *rqtp, struct timespec __user *rmtp);
-asmlinkage unsigned long sys_alarm(unsigned int seconds);
+asmlinkage long sys_alarm(unsigned int seconds);
 asmlinkage long sys_getpid(void);
 asmlinkage long sys_getppid(void);
 asmlinkage long sys_getuid(void);
@@ -166,7 +235,7 @@
 				unsigned long flags);
 
 asmlinkage long sys_exit(int error_code);
-asmlinkage void sys_exit_group(int error_code);
+asmlinkage long sys_exit_group(int error_code);
 asmlinkage long sys_wait4(pid_t pid, int __user *stat_addr,
 				int options, struct rusage __user *ru);
 asmlinkage long sys_waitid(int which, pid_t pid,
@@ -196,7 +265,7 @@
 asmlinkage long sys_rt_sigqueueinfo(int pid, int sig, siginfo_t __user *uinfo);
 asmlinkage long sys_sgetmask(void);
 asmlinkage long sys_ssetmask(int newmask);
-asmlinkage unsigned long sys_signal(int sig, __sighandler_t handler);
+asmlinkage long sys_signal(int sig, __sighandler_t handler);
 asmlinkage long sys_pause(void);
 
 asmlinkage long sys_sync(void);
@@ -246,29 +315,29 @@
 			      const void __user *value, size_t size, int flags);
 asmlinkage long sys_fsetxattr(int fd, const char __user *name,
 			      const void __user *value, size_t size, int flags);
-asmlinkage ssize_t sys_getxattr(const char __user *path, const char __user *name,
-				void __user *value, size_t size);
-asmlinkage ssize_t sys_lgetxattr(const char __user *path, const char __user *name,
-				void __user *value, size_t size);
-asmlinkage ssize_t sys_fgetxattr(int fd, const char __user *name,
-				void __user *value, size_t size);
-asmlinkage ssize_t sys_listxattr(const char __user *path, char __user *list,
-				size_t size);
-asmlinkage ssize_t sys_llistxattr(const char __user *path, char __user *list,
-				size_t size);
-asmlinkage ssize_t sys_flistxattr(int fd, char __user *list, size_t size);
+asmlinkage long sys_getxattr(const char __user *path, const char __user *name,
+			     void __user *value, size_t size);
+asmlinkage long sys_lgetxattr(const char __user *path, const char __user *name,
+			      void __user *value, size_t size);
+asmlinkage long sys_fgetxattr(int fd, const char __user *name,
+			      void __user *value, size_t size);
+asmlinkage long sys_listxattr(const char __user *path, char __user *list,
+			      size_t size);
+asmlinkage long sys_llistxattr(const char __user *path, char __user *list,
+			       size_t size);
+asmlinkage long sys_flistxattr(int fd, char __user *list, size_t size);
 asmlinkage long sys_removexattr(const char __user *path,
 				const char __user *name);
 asmlinkage long sys_lremovexattr(const char __user *path,
 				 const char __user *name);
 asmlinkage long sys_fremovexattr(int fd, const char __user *name);
 
-asmlinkage unsigned long sys_brk(unsigned long brk);
+asmlinkage long sys_brk(unsigned long brk);
 asmlinkage long sys_mprotect(unsigned long start, size_t len,
 				unsigned long prot);
-asmlinkage unsigned long sys_mremap(unsigned long addr,
-				unsigned long old_len, unsigned long new_len,
-				unsigned long flags, unsigned long new_addr);
+asmlinkage long sys_mremap(unsigned long addr,
+			   unsigned long old_len, unsigned long new_len,
+			   unsigned long flags, unsigned long new_addr);
 asmlinkage long sys_remap_file_pages(unsigned long start, unsigned long size,
 			unsigned long prot, unsigned long pgoff,
 			unsigned long flags);
@@ -321,10 +390,10 @@
 				struct iocb __user * __user *);
 asmlinkage long sys_io_cancel(aio_context_t ctx_id, struct iocb __user *iocb,
 			      struct io_event __user *result);
-asmlinkage ssize_t sys_sendfile(int out_fd, int in_fd,
-				off_t __user *offset, size_t count);
-asmlinkage ssize_t sys_sendfile64(int out_fd, int in_fd,
-				loff_t __user *offset, size_t count);
+asmlinkage long sys_sendfile(int out_fd, int in_fd,
+			     off_t __user *offset, size_t count);
+asmlinkage long sys_sendfile64(int out_fd, int in_fd,
+			       loff_t __user *offset, size_t count);
 asmlinkage long sys_readlink(const char __user *path,
 				char __user *buf, int bufsiz);
 asmlinkage long sys_creat(const char __user *pathname, int mode);
@@ -368,26 +437,25 @@
 				struct utimbuf __user *times);
 asmlinkage long sys_utimes(char __user *filename,
 				struct timeval __user *utimes);
-asmlinkage off_t sys_lseek(unsigned int fd, off_t offset,
-				unsigned int origin);
+asmlinkage long sys_lseek(unsigned int fd, off_t offset,
+			  unsigned int origin);
 asmlinkage long sys_llseek(unsigned int fd, unsigned long offset_high,
 			unsigned long offset_low, loff_t __user *result,
 			unsigned int origin);
-asmlinkage ssize_t sys_read(unsigned int fd, char __user *buf,
-				size_t count);
-asmlinkage ssize_t sys_readahead(int fd, loff_t offset, size_t count);
-asmlinkage ssize_t sys_readv(unsigned long fd,
-				const struct iovec __user *vec,
-				unsigned long vlen);
-asmlinkage ssize_t sys_write(unsigned int fd, const char __user *buf,
-				size_t count);
-asmlinkage ssize_t sys_writev(unsigned long fd,
-				const struct iovec __user *vec,
-				unsigned long vlen);
-asmlinkage ssize_t sys_pread64(unsigned int fd, char __user *buf,
-				size_t count, loff_t pos);
-asmlinkage ssize_t sys_pwrite64(unsigned int fd, const char __user *buf,
-				size_t count, loff_t pos);
+asmlinkage long sys_read(unsigned int fd, char __user *buf, size_t count);
+asmlinkage long sys_readahead(int fd, loff_t offset, size_t count);
+asmlinkage long sys_readv(unsigned long fd,
+			  const struct iovec __user *vec,
+			  unsigned long vlen);
+asmlinkage long sys_write(unsigned int fd, const char __user *buf,
+			  size_t count);
+asmlinkage long sys_writev(unsigned long fd,
+			   const struct iovec __user *vec,
+			   unsigned long vlen);
+asmlinkage long sys_pread64(unsigned int fd, char __user *buf,
+			    size_t count, loff_t pos);
+asmlinkage long sys_pwrite64(unsigned int fd, const char __user *buf,
+			     size_t count, loff_t pos);
 asmlinkage long sys_getcwd(char __user *buf, unsigned long size);
 asmlinkage long sys_mkdir(const char __user *pathname, int mode);
 asmlinkage long sys_chdir(const char __user *filename);
@@ -476,7 +544,7 @@
 asmlinkage long sys_mq_open(const char __user *name, int oflag, mode_t mode, struct mq_attr __user *attr);
 asmlinkage long sys_mq_unlink(const char __user *name);
 asmlinkage long sys_mq_timedsend(mqd_t mqdes, const char __user *msg_ptr, size_t msg_len, unsigned int msg_prio, const struct timespec __user *abs_timeout);
-asmlinkage ssize_t sys_mq_timedreceive(mqd_t mqdes, char __user *msg_ptr, size_t msg_len, unsigned int __user *msg_prio, const struct timespec __user *abs_timeout);
+asmlinkage long sys_mq_timedreceive(mqd_t mqdes, char __user *msg_ptr, size_t msg_len, unsigned int __user *msg_prio, const struct timespec __user *abs_timeout);
 asmlinkage long sys_mq_notify(mqd_t mqdes, const struct sigevent __user *notification);
 asmlinkage long sys_mq_getsetattr(mqd_t mqdes, const struct mq_attr __user *mqstat, struct mq_attr __user *omqstat);
 
@@ -530,11 +598,6 @@
 				const int __user *nodes,
 				int __user *status,
 				int flags);
-asmlinkage long compat_sys_move_pages(pid_t pid, unsigned long nr_page,
-				__u32 __user *pages,
-				const int __user *nodes,
-				int __user *status,
-				int flags);
 asmlinkage long sys_mbind(unsigned long start, unsigned long len,
 				unsigned long mode,
 				unsigned long __user *nmask,
@@ -583,13 +646,6 @@
 			       int bufsiz);
 asmlinkage long sys_utimensat(int dfd, char __user *filename,
 				struct timespec __user *utimes, int flags);
-asmlinkage long compat_sys_futimesat(unsigned int dfd, char __user *filename,
-				     struct compat_timeval __user *t);
-asmlinkage long compat_sys_newfstatat(unsigned int dfd, char __user * filename,
-				      struct compat_stat __user *statbuf,
-				      int flag);
-asmlinkage long compat_sys_openat(unsigned int dfd, const char __user *filename,
-				   int flags, int mode);
 asmlinkage long sys_unshare(unsigned long unshare_flags);
 
 asmlinkage long sys_splice(int fd_in, loff_t __user *off_in,
@@ -621,6 +677,15 @@
 asmlinkage long sys_eventfd(unsigned int count);
 asmlinkage long sys_eventfd2(unsigned int count, int flags);
 asmlinkage long sys_fallocate(int fd, int mode, loff_t offset, loff_t len);
+asmlinkage long sys_old_readdir(unsigned int, struct old_linux_dirent __user *, unsigned int);
+asmlinkage long sys_pselect6(int, fd_set __user *, fd_set __user *,
+			     fd_set __user *, struct timespec __user *,
+			     void __user *);
+asmlinkage long sys_ppoll(struct pollfd __user *, unsigned int,
+			  struct timespec __user *, const sigset_t __user *,
+			  size_t);
+asmlinkage long sys_pipe2(int __user *, int);
+asmlinkage long sys_pipe(int __user *);
 
 int kernel_execve(const char *filename, char *const argv[], char *const envp[]);
 
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 85ee9be..88079fd 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -418,6 +418,8 @@
  * @autosuspend_disabled: autosuspend disabled by the user
  * @autoresume_disabled: autoresume disabled by the user
  * @skip_sys_resume: skip the next system resume
+ * @wusb_dev: if this is a Wireless USB device, link to the WUSB
+ *	specific data for the device.
  *
  * Notes:
  * Usbcore drivers should not set usbdev->state directly.  Instead use
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
index ba09fe8..7d38222 100644
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@@ -197,7 +197,9 @@
 #define devdbg(usbnet, fmt, arg...) \
 	printk(KERN_DEBUG "%s: " fmt "\n" , (usbnet)->net->name , ## arg)
 #else
-#define devdbg(usbnet, fmt, arg...) do {} while(0)
+#define devdbg(usbnet, fmt, arg...) \
+	({ if (0) printk(KERN_DEBUG "%s: " fmt "\n" , (usbnet)->net->name , \
+		## arg); 0; })
 #endif
 
 #define deverr(usbnet, fmt, arg...) \
diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h
index b362911..3cd51e5 100644
--- a/include/linux/workqueue.h
+++ b/include/linux/workqueue.h
@@ -118,12 +118,24 @@
 		init_timer(&(_work)->timer);			\
 	} while (0)
 
+#define INIT_DELAYED_WORK_ON_STACK(_work, _func)		\
+	do {							\
+		INIT_WORK(&(_work)->work, (_func));		\
+		init_timer_on_stack(&(_work)->timer);		\
+	} while (0)
+
 #define INIT_DELAYED_WORK_DEFERRABLE(_work, _func)			\
 	do {							\
 		INIT_WORK(&(_work)->work, (_func));		\
 		init_timer_deferrable(&(_work)->timer);		\
 	} while (0)
 
+#define INIT_DELAYED_WORK_ON_STACK(_work, _func)		\
+	do {							\
+		INIT_WORK(&(_work)->work, (_func));		\
+		init_timer_on_stack(&(_work)->timer);		\
+	} while (0)
+
 /**
  * work_pending - Find out whether a work item is currently pending
  * @work: The work item in question
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index b3bd00a..559422f 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -322,7 +322,6 @@
  * @control: union for control data
  * @status: union for status data
  * @driver_data: array of driver_data pointers
- * @retry_count: number of retries
  * @ampdu_ack_len: number of aggregated frames.
  * 	relevant only if IEEE80211_TX_STATUS_AMPDU was set.
  * @ampdu_ack_map: block ack bit map for the aggregation.
diff --git a/include/net/sctp/checksum.h b/include/net/sctp/checksum.h
index b799fb21..2fec3c3 100644
--- a/include/net/sctp/checksum.h
+++ b/include/net/sctp/checksum.h
@@ -79,5 +79,5 @@
 
 static inline __be32 sctp_end_cksum(__be32 crc32)
 {
-	return ~crc32;
+	return (__force __be32)~cpu_to_le32((__force u32)crc32);
 }
diff --git a/include/scsi/libiscsi_tcp.h b/include/scsi/libiscsi_tcp.h
index 83e32f6..9e3182e 100644
--- a/include/scsi/libiscsi_tcp.h
+++ b/include/scsi/libiscsi_tcp.h
@@ -39,6 +39,7 @@
 	unsigned int		total_copied;
 
 	struct hash_desc	*hash;
+	unsigned char		padbuf[ISCSI_PAD_LEN];
 	unsigned char		recv_digest[ISCSI_DIGEST_SIZE];
 	unsigned char		digest[ISCSI_DIGEST_SIZE];
 	unsigned int		digest_len;
diff --git a/include/sound/core.h b/include/sound/core.h
index f632484..f67952a 100644
--- a/include/sound/core.h
+++ b/include/sound/core.h
@@ -446,21 +446,33 @@
 struct snd_pci_quirk {
 	unsigned short subvendor;	/* PCI subvendor ID */
 	unsigned short subdevice;	/* PCI subdevice ID */
+	unsigned short subdevice_mask;	/* bitmask to match */
 	int value;			/* value */
 #ifdef CONFIG_SND_DEBUG_VERBOSE
 	const char *name;		/* name of the device (optional) */
 #endif
 };
 
-#define _SND_PCI_QUIRK_ID(vend,dev) \
-	.subvendor = (vend), .subdevice = (dev)
+#define _SND_PCI_QUIRK_ID_MASK(vend, mask, dev)	\
+	.subvendor = (vend), .subdevice = (dev), .subdevice_mask = (mask)
+#define _SND_PCI_QUIRK_ID(vend, dev) \
+	_SND_PCI_QUIRK_ID_MASK(vend, 0xffff, dev)
 #define SND_PCI_QUIRK_ID(vend,dev) {_SND_PCI_QUIRK_ID(vend, dev)}
 #ifdef CONFIG_SND_DEBUG_VERBOSE
 #define SND_PCI_QUIRK(vend,dev,xname,val) \
 	{_SND_PCI_QUIRK_ID(vend, dev), .value = (val), .name = (xname)}
+#define SND_PCI_QUIRK_VENDOR(vend, xname, val)			\
+	{_SND_PCI_QUIRK_ID_MASK(vend, 0, 0), .value = (val), .name = (xname)}
+#define SND_PCI_QUIRK_MASK(vend, mask, dev, xname, val)			\
+	{_SND_PCI_QUIRK_ID_MASK(vend, mask, dev),			\
+			.value = (val), .name = (xname)}
 #else
 #define SND_PCI_QUIRK(vend,dev,xname,val) \
 	{_SND_PCI_QUIRK_ID(vend, dev), .value = (val)}
+#define SND_PCI_QUIRK_MASK(vend, mask, dev, xname, val)			\
+	{_SND_PCI_QUIRK_ID_MASK(vend, mask, dev), .value = (val)}
+#define SND_PCI_QUIRK_VENDOR(vend, xname, val)			\
+	{_SND_PCI_QUIRK_ID_MASK(vend, 0, 0), .value = (val)}
 #endif
 
 const struct snd_pci_quirk *
diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h
index 93a4edb..dfa8049 100644
--- a/include/sound/soc-dapm.h
+++ b/include/sound/soc-dapm.h
@@ -108,7 +108,7 @@
 #define SND_SOC_DAPM_SWITCH_E(wname, wreg, wshift, winvert, wcontrols, \
 	wevent, wflags) \
 {	.id = snd_soc_dapm_switch, .name = wname, .reg = wreg, .shift = wshift, \
-	.invert = winvert, .kcontrols = wcontrols, .num_kcontrols = 1 \
+	.invert = winvert, .kcontrols = wcontrols, .num_kcontrols = 1, \
 	.event = wevent, .event_flags = wflags}
 #define SND_SOC_DAPM_MUX_E(wname, wreg, wshift, winvert, wcontrols, \
 	wevent, wflags) \
diff --git a/init/Kconfig b/init/Kconfig
index a724a14..f068071 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -238,6 +238,98 @@
 	def_bool y
 	depends on AUDITSYSCALL && INOTIFY
 
+menu "RCU Subsystem"
+
+choice
+	prompt "RCU Implementation"
+	default CLASSIC_RCU
+
+config CLASSIC_RCU
+	bool "Classic RCU"
+	help
+	  This option selects the classic RCU implementation that is
+	  designed for best read-side performance on non-realtime
+	  systems.
+
+	  Select this option if you are unsure.
+
+config TREE_RCU
+	bool "Tree-based hierarchical RCU"
+	help
+	  This option selects the RCU implementation that is
+	  designed for very large SMP system with hundreds or
+	  thousands of CPUs.
+
+config PREEMPT_RCU
+	bool "Preemptible RCU"
+	depends on PREEMPT
+	help
+	  This option reduces the latency of the kernel by making certain
+	  RCU sections preemptible. Normally RCU code is non-preemptible, if
+	  this option is selected then read-only RCU sections become
+	  preemptible. This helps latency, but may expose bugs due to
+	  now-naive assumptions about each RCU read-side critical section
+	  remaining on a given CPU through its execution.
+
+endchoice
+
+config RCU_TRACE
+	bool "Enable tracing for RCU"
+	depends on TREE_RCU || PREEMPT_RCU
+	help
+	  This option provides tracing in RCU which presents stats
+	  in debugfs for debugging RCU implementation.
+
+	  Say Y here if you want to enable RCU tracing
+	  Say N if you are unsure.
+
+config RCU_FANOUT
+	int "Tree-based hierarchical RCU fanout value"
+	range 2 64 if 64BIT
+	range 2 32 if !64BIT
+	depends on TREE_RCU
+	default 64 if 64BIT
+	default 32 if !64BIT
+	help
+	  This option controls the fanout of hierarchical implementations
+	  of RCU, allowing RCU to work efficiently on machines with
+	  large numbers of CPUs.  This value must be at least the cube
+	  root of NR_CPUS, which allows NR_CPUS up to 32,768 for 32-bit
+	  systems and up to 262,144 for 64-bit systems.
+
+	  Select a specific number if testing RCU itself.
+	  Take the default if unsure.
+
+config RCU_FANOUT_EXACT
+	bool "Disable tree-based hierarchical RCU auto-balancing"
+	depends on TREE_RCU
+	default n
+	help
+	  This option forces use of the exact RCU_FANOUT value specified,
+	  regardless of imbalances in the hierarchy.  This is useful for
+	  testing RCU itself, and might one day be useful on systems with
+	  strong NUMA behavior.
+
+	  Without RCU_FANOUT_EXACT, the code will balance the hierarchy.
+
+	  Say N if unsure.
+
+config TREE_RCU_TRACE
+	def_bool RCU_TRACE && TREE_RCU
+	select DEBUG_FS
+	help
+	  This option provides tracing for the TREE_RCU implementation,
+	  permitting Makefile to trivially select kernel/rcutree_trace.c.
+
+config PREEMPT_RCU_TRACE
+	def_bool RCU_TRACE && PREEMPT_RCU
+	select DEBUG_FS
+	help
+	  This option provides tracing for the PREEMPT_RCU implementation,
+	  permitting Makefile to trivially select kernel/rcupreempt_trace.c.
+
+endmenu # "RCU Subsystem"
+
 config IKCONFIG
 	tristate "Kernel .config support"
 	---help---
@@ -323,26 +415,26 @@
 	  This option allows you to create arbitrary task groups
 	  using the "cgroup" pseudo filesystem and control
 	  the cpu bandwidth allocated to each such task group.
-	  Refer to Documentation/cgroups.txt for more information
-	  on "cgroup" pseudo filesystem.
+	  Refer to Documentation/cgroups/cgroups.txt for more
+	  information on "cgroup" pseudo filesystem.
 
 endchoice
 
-menu "Control Group support"
-config CGROUPS
-	bool "Control Group support"
+menuconfig CGROUPS
+	boolean "Control Group support"
 	help
-	  This option add support for grouping sets of processes together, for
+	  This option adds support for grouping sets of processes together, for
 	  use with process control subsystems such as Cpusets, CFS, memory
 	  controls or device isolation.
 	  See
-		- Documentation/cpusets.txt	(Cpusets)
 		- Documentation/scheduler/sched-design-CFS.txt	(CFS)
-		- Documentation/cgroups/ (features for grouping, isolation)
-		- Documentation/controllers/ (features for resource control)
+		- Documentation/cgroups/ (features for grouping, isolation
+					  and resource control)
 
 	  Say N if unsure.
 
+if CGROUPS
+
 config CGROUP_DEBUG
 	bool "Example debug cgroup subsystem"
 	depends on CGROUPS
@@ -350,24 +442,24 @@
 	help
 	  This option enables a simple cgroup subsystem that
 	  exports useful debugging information about the cgroups
-	  framework
+	  framework.
 
-	  Say N if unsure
+	  Say N if unsure.
 
 config CGROUP_NS
-        bool "Namespace cgroup subsystem"
-        depends on CGROUPS
-        help
-          Provides a simple namespace cgroup subsystem to
-          provide hierarchical naming of sets of namespaces,
-          for instance virtual servers and checkpoint/restart
-          jobs.
+	bool "Namespace cgroup subsystem"
+	depends on CGROUPS
+	help
+	  Provides a simple namespace cgroup subsystem to
+	  provide hierarchical naming of sets of namespaces,
+	  for instance virtual servers and checkpoint/restart
+	  jobs.
 
 config CGROUP_FREEZER
-        bool "control group freezer subsystem"
-        depends on CGROUPS
-        help
-          Provides a way to freeze and unfreeze all tasks in a
+	bool "Freezer cgroup subsystem"
+	depends on CGROUPS
+	help
+	  Provides a way to freeze and unfreeze all tasks in a
 	  cgroup.
 
 config CGROUP_DEVICE
@@ -388,18 +480,23 @@
 
 	  Say N if unsure.
 
+config PROC_PID_CPUSET
+	bool "Include legacy /proc/<pid>/cpuset file"
+	depends on CPUSETS
+	default y
+
 config CGROUP_CPUACCT
 	bool "Simple CPU accounting cgroup subsystem"
 	depends on CGROUPS
 	help
 	  Provides a simple Resource Controller for monitoring the
-	  total CPU consumed by the tasks in a cgroup
+	  total CPU consumed by the tasks in a cgroup.
 
 config RESOURCE_COUNTERS
 	bool "Resource counters"
 	help
 	  This option enables controller independent resource accounting
-          infrastructure that works with cgroups
+	  infrastructure that works with cgroups.
 	depends on CGROUPS
 
 config CGROUP_MEM_RES_CTLR
@@ -425,9 +522,6 @@
 	  This config option also selects MM_OWNER config option, which
 	  could in turn add some fork/exit overhead.
 
-config MM_OWNER
-	bool
-
 config CGROUP_MEM_RES_CTLR_SWAP
 	bool "Memory Resource Controller Swap Extension(EXPERIMENTAL)"
 	depends on CGROUP_MEM_RES_CTLR && SWAP && EXPERIMENTAL
@@ -444,8 +538,10 @@
 	  there will be no overhead from this. Even when you set this config=y,
 	  if boot option "noswapaccount" is set, swap will not be accounted.
 
+endif # CGROUPS
 
-endmenu
+config MM_OWNER
+	bool
 
 config SYSFS_DEPRECATED
 	bool
@@ -483,11 +579,6 @@
 	  if the original kernel, that came with your distribution, has
 	  this option set to N.
 
-config PROC_PID_CPUSET
-	bool "Include legacy /proc/<pid>/cpuset file"
-	depends on CPUSETS
-	default y
-
 config RELAY
 	bool "Kernel->user space relay support (formerly relayfs)"
 	help
@@ -542,6 +633,14 @@
 	  Unless you want to work with an experimental feature
 	  say N here.
 
+config NET_NS
+	bool "Network namespace"
+	default n
+	depends on NAMESPACES && EXPERIMENTAL && NET
+	help
+	  Allow user space to create what appear to be multiple instances
+	  of the network stack.
+
 config BLK_DEV_INITRD
 	bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
 	depends on BROKEN || !FRV
@@ -626,13 +725,6 @@
 
 	   Say N.
 
-config KALLSYMS_STRIP_GENERATED
-	bool "Strip machine generated symbols from kallsyms"
-	depends on KALLSYMS_ALL
-	default y
-	help
-	  Say N if you want kallsyms to retain even machine generated symbols.
-
 config KALLSYMS_EXTRA_PASS
 	bool "Do an extra kallsyms pass"
 	depends on KALLSYMS
@@ -973,90 +1065,3 @@
 config PREEMPT_NOTIFIERS
 	bool
 
-choice
-	prompt "RCU Implementation"
-	default CLASSIC_RCU
-
-config CLASSIC_RCU
-	bool "Classic RCU"
-	help
-	  This option selects the classic RCU implementation that is
-	  designed for best read-side performance on non-realtime
-	  systems.
-
-	  Select this option if you are unsure.
-
-config TREE_RCU
-	bool "Tree-based hierarchical RCU"
-	help
-	  This option selects the RCU implementation that is
-	  designed for very large SMP system with hundreds or
-	  thousands of CPUs.
-
-config PREEMPT_RCU
-	bool "Preemptible RCU"
-	depends on PREEMPT
-	help
-	  This option reduces the latency of the kernel by making certain
-	  RCU sections preemptible. Normally RCU code is non-preemptible, if
-	  this option is selected then read-only RCU sections become
-	  preemptible. This helps latency, but may expose bugs due to
-	  now-naive assumptions about each RCU read-side critical section
-	  remaining on a given CPU through its execution.
-
-endchoice
-
-config RCU_TRACE
-	bool "Enable tracing for RCU"
-	depends on TREE_RCU || PREEMPT_RCU
-	help
-	  This option provides tracing in RCU which presents stats
-	  in debugfs for debugging RCU implementation.
-
-	  Say Y here if you want to enable RCU tracing
-	  Say N if you are unsure.
-
-config RCU_FANOUT
-	int "Tree-based hierarchical RCU fanout value"
-	range 2 64 if 64BIT
-	range 2 32 if !64BIT
-	depends on TREE_RCU
-	default 64 if 64BIT
-	default 32 if !64BIT
-	help
-	  This option controls the fanout of hierarchical implementations
-	  of RCU, allowing RCU to work efficiently on machines with
-	  large numbers of CPUs.  This value must be at least the cube
-	  root of NR_CPUS, which allows NR_CPUS up to 32,768 for 32-bit
-	  systems and up to 262,144 for 64-bit systems.
-
-	  Select a specific number if testing RCU itself.
-	  Take the default if unsure.
-
-config RCU_FANOUT_EXACT
-	bool "Disable tree-based hierarchical RCU auto-balancing"
-	depends on TREE_RCU
-	default n
-	help
-	  This option forces use of the exact RCU_FANOUT value specified,
-	  regardless of imbalances in the hierarchy.  This is useful for
-	  testing RCU itself, and might one day be useful on systems with
-	  strong NUMA behavior.
-
-	  Without RCU_FANOUT_EXACT, the code will balance the hierarchy.
-
-	  Say N if unsure.
-
-config TREE_RCU_TRACE
-	def_bool RCU_TRACE && TREE_RCU
-	select DEBUG_FS
-	help
-	  This option provides tracing for the TREE_RCU implementation,
-	  permitting Makefile to trivially select kernel/rcutree_trace.c.
-
-config PREEMPT_RCU_TRACE
-	def_bool RCU_TRACE && PREEMPT_RCU
-	select DEBUG_FS
-	help
-	  This option provides tracing for the PREEMPT_RCU implementation,
-	  permitting Makefile to trivially select kernel/rcupreempt_trace.c.
diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index 23fdb84..54b4077 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -650,8 +650,8 @@
 	return dentry_open(dentry, mqueue_mnt, oflag, cred);
 }
 
-asmlinkage long sys_mq_open(const char __user *u_name, int oflag, mode_t mode,
-				struct mq_attr __user *u_attr)
+SYSCALL_DEFINE4(mq_open, const char __user *, u_name, int, oflag, mode_t, mode,
+		struct mq_attr __user *, u_attr)
 {
 	struct dentry *dentry;
 	struct file *filp;
@@ -721,7 +721,7 @@
 	return fd;
 }
 
-asmlinkage long sys_mq_unlink(const char __user *u_name)
+SYSCALL_DEFINE1(mq_unlink, const char __user *, u_name)
 {
 	int err;
 	char *name;
@@ -814,9 +814,9 @@
 	sender->state = STATE_READY;
 }
 
-asmlinkage long sys_mq_timedsend(mqd_t mqdes, const char __user *u_msg_ptr,
-	size_t msg_len, unsigned int msg_prio,
-	const struct timespec __user *u_abs_timeout)
+SYSCALL_DEFINE5(mq_timedsend, mqd_t, mqdes, const char __user *, u_msg_ptr,
+		size_t, msg_len, unsigned int, msg_prio,
+		const struct timespec __user *, u_abs_timeout)
 {
 	struct file *filp;
 	struct inode *inode;
@@ -907,9 +907,9 @@
 	return ret;
 }
 
-asmlinkage ssize_t sys_mq_timedreceive(mqd_t mqdes, char __user *u_msg_ptr,
-	size_t msg_len, unsigned int __user *u_msg_prio,
-	const struct timespec __user *u_abs_timeout)
+SYSCALL_DEFINE5(mq_timedreceive, mqd_t, mqdes, char __user *, u_msg_ptr,
+		size_t, msg_len, unsigned int __user *, u_msg_prio,
+		const struct timespec __user *, u_abs_timeout)
 {
 	long timeout;
 	ssize_t ret;
@@ -997,8 +997,8 @@
  * and he isn't currently owner of notification, will be silently discarded.
  * It isn't explicitly defined in the POSIX.
  */
-asmlinkage long sys_mq_notify(mqd_t mqdes,
-				const struct sigevent __user *u_notification)
+SYSCALL_DEFINE2(mq_notify, mqd_t, mqdes,
+		const struct sigevent __user *, u_notification)
 {
 	int ret;
 	struct file *filp;
@@ -1123,9 +1123,9 @@
 	return ret;
 }
 
-asmlinkage long sys_mq_getsetattr(mqd_t mqdes,
-			const struct mq_attr __user *u_mqstat,
-			struct mq_attr __user *u_omqstat)
+SYSCALL_DEFINE3(mq_getsetattr, mqd_t, mqdes,
+		const struct mq_attr __user *, u_mqstat,
+		struct mq_attr __user *, u_omqstat)
 {
 	int ret;
 	struct mq_attr mqstat, omqstat;
diff --git a/ipc/msg.c b/ipc/msg.c
index b4eee1c..2ceab7f 100644
--- a/ipc/msg.c
+++ b/ipc/msg.c
@@ -309,7 +309,7 @@
 	return security_msg_queue_associate(msq, msgflg);
 }
 
-asmlinkage long sys_msgget(key_t key, int msgflg)
+SYSCALL_DEFINE2(msgget, key_t, key, int, msgflg)
 {
 	struct ipc_namespace *ns;
 	struct ipc_ops msg_ops;
@@ -466,7 +466,7 @@
 	return err;
 }
 
-asmlinkage long sys_msgctl(int msqid, int cmd, struct msqid_ds __user *buf)
+SYSCALL_DEFINE3(msgctl, int, msqid, int, cmd, struct msqid_ds __user *, buf)
 {
 	struct msg_queue *msq;
 	int err, version;
@@ -723,8 +723,8 @@
 	return err;
 }
 
-asmlinkage long
-sys_msgsnd(int msqid, struct msgbuf __user *msgp, size_t msgsz, int msgflg)
+SYSCALL_DEFINE4(msgsnd, int, msqid, struct msgbuf __user *, msgp, size_t, msgsz,
+		int, msgflg)
 {
 	long mtype;
 
@@ -904,8 +904,8 @@
 	return msgsz;
 }
 
-asmlinkage long sys_msgrcv(int msqid, struct msgbuf __user *msgp, size_t msgsz,
-			   long msgtyp, int msgflg)
+SYSCALL_DEFINE5(msgrcv, int, msqid, struct msgbuf __user *, msgp, size_t, msgsz,
+		long, msgtyp, int, msgflg)
 {
 	long err, mtype;
 
diff --git a/ipc/sem.c b/ipc/sem.c
index c68cd3f..16a2189 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -308,7 +308,7 @@
 	return 0;
 }
 
-asmlinkage long sys_semget(key_t key, int nsems, int semflg)
+SYSCALL_DEFINE3(semget, key_t, key, int, nsems, int, semflg)
 {
 	struct ipc_namespace *ns;
 	struct ipc_ops sem_ops;
@@ -887,7 +887,7 @@
 	return err;
 }
 
-asmlinkage long sys_semctl (int semid, int semnum, int cmd, union semun arg)
+SYSCALL_DEFINE(semctl)(int semid, int semnum, int cmd, union semun arg)
 {
 	int err = -EINVAL;
 	int version;
@@ -923,6 +923,13 @@
 		return -EINVAL;
 	}
 }
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_semctl(int semid, int semnum, int cmd, union semun arg)
+{
+	return SYSC_semctl((int) semid, (int) semnum, (int) cmd, arg);
+}
+SYSCALL_ALIAS(sys_semctl, SyS_semctl);
+#endif
 
 /* If the task doesn't already have a undo_list, then allocate one
  * here.  We guarantee there is only one thread using this undo list,
@@ -1048,8 +1055,8 @@
 	return un;
 }
 
-asmlinkage long sys_semtimedop(int semid, struct sembuf __user *tsops,
-			unsigned nsops, const struct timespec __user *timeout)
+SYSCALL_DEFINE4(semtimedop, int, semid, struct sembuf __user *, tsops,
+		unsigned, nsops, const struct timespec __user *, timeout)
 {
 	int error = -EINVAL;
 	struct sem_array *sma;
@@ -1225,7 +1232,8 @@
 	return error;
 }
 
-asmlinkage long sys_semop (int semid, struct sembuf __user *tsops, unsigned nsops)
+SYSCALL_DEFINE3(semop, int, semid, struct sembuf __user *, tsops,
+		unsigned, nsops)
 {
 	return sys_semtimedop(semid, tsops, nsops, NULL);
 }
diff --git a/ipc/shm.c b/ipc/shm.c
index d0ab552..a9e09ad 100644
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -440,7 +440,7 @@
 	return 0;
 }
 
-asmlinkage long sys_shmget (key_t key, size_t size, int shmflg)
+SYSCALL_DEFINE3(shmget, key_t, key, size_t, size, int, shmflg)
 {
 	struct ipc_namespace *ns;
 	struct ipc_ops shm_ops;
@@ -621,7 +621,7 @@
 	return err;
 }
 
-asmlinkage long sys_shmctl(int shmid, int cmd, struct shmid_ds __user *buf)
+SYSCALL_DEFINE3(shmctl, int, shmid, int, cmd, struct shmid_ds __user *, buf)
 {
 	struct shmid_kernel *shp;
 	int err, version;
@@ -939,7 +939,7 @@
 	goto out_nattch;
 }
 
-asmlinkage long sys_shmat(int shmid, char __user *shmaddr, int shmflg)
+SYSCALL_DEFINE3(shmat, int, shmid, char __user *, shmaddr, int, shmflg)
 {
 	unsigned long ret;
 	long err;
@@ -955,7 +955,7 @@
  * detach and kill segment if marked destroyed.
  * The work is done in shm_close.
  */
-asmlinkage long sys_shmdt(char __user *shmaddr)
+SYSCALL_DEFINE1(shmdt, char __user *, shmaddr)
 {
 	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma, *next;
diff --git a/kernel/Makefile b/kernel/Makefile
index 2aebc4c..170a921 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -40,9 +40,8 @@
 obj-$(CONFIG_DEBUG_RT_MUTEXES) += rtmutex-debug.o
 obj-$(CONFIG_RT_MUTEX_TESTER) += rtmutex-tester.o
 obj-$(CONFIG_GENERIC_ISA_DMA) += dma.o
-ifeq ($(CONFIG_USE_GENERIC_SMP_HELPERS),y)
-obj-y += smp.o
-else
+obj-$(CONFIG_USE_GENERIC_SMP_HELPERS) += smp.o
+ifneq ($(CONFIG_SMP),y)
 obj-y += up.o
 endif
 obj-$(CONFIG_SMP) += spinlock.o
diff --git a/kernel/acct.c b/kernel/acct.c
index d57b7cb..7afa315 100644
--- a/kernel/acct.c
+++ b/kernel/acct.c
@@ -277,7 +277,7 @@
  * should be written. If the filename is NULL, accounting will be
  * shutdown.
  */
-asmlinkage long sys_acct(const char __user *name)
+SYSCALL_DEFINE1(acct, const char __user *, name)
 {
 	int error;
 
diff --git a/kernel/capability.c b/kernel/capability.c
index 688926e..4e17041 100644
--- a/kernel/capability.c
+++ b/kernel/capability.c
@@ -161,7 +161,7 @@
  *
  * Returns 0 on success and < 0 on error.
  */
-asmlinkage long sys_capget(cap_user_header_t header, cap_user_data_t dataptr)
+SYSCALL_DEFINE2(capget, cap_user_header_t, header, cap_user_data_t, dataptr)
 {
 	int ret = 0;
 	pid_t pid;
@@ -235,7 +235,7 @@
  *
  * Returns 0 on success and < 0 on error.
  */
-asmlinkage long sys_capset(cap_user_header_t header, const cap_user_data_t data)
+SYSCALL_DEFINE2(capset, cap_user_header_t, header, const cap_user_data_t, data)
 {
 	struct __user_cap_data_struct kdata[_KERNEL_CAPABILITY_U32S];
 	unsigned i, tocopy;
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 647c77a..a856788 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -568,7 +568,7 @@
  * load balancing domains (sched domains) as specified by that partial
  * partition.
  *
- * See "What is sched_load_balance" in Documentation/cpusets.txt
+ * See "What is sched_load_balance" in Documentation/cgroups/cpusets.txt
  * for a background explanation of this.
  *
  * Does not return errors, on the theory that the callers of this
diff --git a/kernel/dma-coherent.c b/kernel/dma-coherent.c
index 0387074..962a3b5 100644
--- a/kernel/dma-coherent.c
+++ b/kernel/dma-coherent.c
@@ -98,7 +98,7 @@
  * @size:	size of requested memory area
  * @dma_handle:	This will be filled with the correct dma handle
  * @ret:	This pointer will be filled with the virtual address
- * 		to allocated area.
+ *		to allocated area.
  *
  * This function should be only called from per-arch dma_alloc_coherent()
  * to support allocation from per-device coherent memory pools.
@@ -118,31 +118,32 @@
 	mem = dev->dma_mem;
 	if (!mem)
 		return 0;
-	if (unlikely(size > mem->size))
- 		return 0;
+
+	*ret = NULL;
+
+	if (unlikely(size > (mem->size << PAGE_SHIFT)))
+		goto err;
 
 	pageno = bitmap_find_free_region(mem->bitmap, mem->size, order);
-	if (pageno >= 0) {
-		/*
-		 * Memory was found in the per-device arena.
-		 */
-		*dma_handle = mem->device_base + (pageno << PAGE_SHIFT);
-		*ret = mem->virt_base + (pageno << PAGE_SHIFT);
-		memset(*ret, 0, size);
-	} else if (mem->flags & DMA_MEMORY_EXCLUSIVE) {
-		/*
-		 * The per-device arena is exhausted and we are not
-		 * permitted to fall back to generic memory.
-		 */
-		*ret = NULL;
-	} else {
-		/*
-		 * The per-device arena is exhausted and we are
-		 * permitted to fall back to generic memory.
-		 */
-		 return 0;
-	}
+	if (unlikely(pageno < 0))
+		goto err;
+
+	/*
+	 * Memory was found in the per-device area.
+	 */
+	*dma_handle = mem->device_base + (pageno << PAGE_SHIFT);
+	*ret = mem->virt_base + (pageno << PAGE_SHIFT);
+	memset(*ret, 0, size);
+
 	return 1;
+
+err:
+	/*
+	 * In the case where the allocation can not be satisfied from the
+	 * per-device area, try to fall back to generic memory if the
+	 * constraints allow it.
+	 */
+	return mem->flags & DMA_MEMORY_EXCLUSIVE;
 }
 EXPORT_SYMBOL(dma_alloc_from_coherent);
 
diff --git a/kernel/exec_domain.c b/kernel/exec_domain.c
index 0511716..667c841 100644
--- a/kernel/exec_domain.c
+++ b/kernel/exec_domain.c
@@ -209,8 +209,7 @@
 module_init(proc_execdomains_init);
 #endif
 
-asmlinkage long
-sys_personality(u_long personality)
+SYSCALL_DEFINE1(personality, u_long, personality)
 {
 	u_long old = current->personality;
 
diff --git a/kernel/exit.c b/kernel/exit.c
index c7740fa..f80dec3 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -1141,7 +1141,7 @@
 
 EXPORT_SYMBOL(complete_and_exit);
 
-asmlinkage long sys_exit(int error_code)
+SYSCALL_DEFINE1(exit, int, error_code)
 {
 	do_exit((error_code&0xff)<<8);
 }
@@ -1182,9 +1182,11 @@
  * wait4()-ing process will get the correct exit code - even if this
  * thread is not the thread group leader.
  */
-asmlinkage void sys_exit_group(int error_code)
+SYSCALL_DEFINE1(exit_group, int, error_code)
 {
 	do_group_exit((error_code & 0xff) << 8);
+	/* NOTREACHED */
+	return 0;
 }
 
 static struct pid *task_pid_type(struct task_struct *task, enum pid_type type)
@@ -1752,9 +1754,8 @@
 	return retval;
 }
 
-asmlinkage long sys_waitid(int which, pid_t upid,
-			   struct siginfo __user *infop, int options,
-			   struct rusage __user *ru)
+SYSCALL_DEFINE5(waitid, int, which, pid_t, upid, struct siginfo __user *,
+		infop, int, options, struct rusage __user *, ru)
 {
 	struct pid *pid = NULL;
 	enum pid_type type;
@@ -1793,8 +1794,8 @@
 	return ret;
 }
 
-asmlinkage long sys_wait4(pid_t upid, int __user *stat_addr,
-			  int options, struct rusage __user *ru)
+SYSCALL_DEFINE4(wait4, pid_t, upid, int __user *, stat_addr,
+		int, options, struct rusage __user *, ru)
 {
 	struct pid *pid = NULL;
 	enum pid_type type;
@@ -1831,7 +1832,7 @@
  * sys_waitpid() remains for compatibility. waitpid() should be
  * implemented by calling sys_wait4() from libc.a.
  */
-asmlinkage long sys_waitpid(pid_t pid, int __user *stat_addr, int options)
+SYSCALL_DEFINE3(waitpid, pid_t, pid, int __user *, stat_addr, int, options)
 {
 	return sys_wait4(pid, stat_addr, options, NULL);
 }
diff --git a/kernel/fork.c b/kernel/fork.c
index 1d68f12..242a706 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -817,17 +817,17 @@
 static int copy_signal(unsigned long clone_flags, struct task_struct *tsk)
 {
 	struct signal_struct *sig;
-	int ret;
 
 	if (clone_flags & CLONE_THREAD) {
-		ret = thread_group_cputime_clone_thread(current);
-		if (likely(!ret)) {
-			atomic_inc(&current->signal->count);
-			atomic_inc(&current->signal->live);
-		}
-		return ret;
+		atomic_inc(&current->signal->count);
+		atomic_inc(&current->signal->live);
+		return 0;
 	}
 	sig = kmem_cache_alloc(signal_cachep, GFP_KERNEL);
+
+	if (sig)
+		posix_cpu_timers_init_group(sig);
+
 	tsk->signal = sig;
 	if (!sig)
 		return -ENOMEM;
@@ -864,8 +864,6 @@
 	memcpy(sig->rlim, current->signal->rlim, sizeof sig->rlim);
 	task_unlock(current->group_leader);
 
-	posix_cpu_timers_init_group(sig);
-
 	acct_init_pacct(&sig->pacct);
 
 	tty_audit_fork(sig);
@@ -901,7 +899,7 @@
 	clear_freeze_flag(p);
 }
 
-asmlinkage long sys_set_tid_address(int __user *tidptr)
+SYSCALL_DEFINE1(set_tid_address, int __user *, tidptr)
 {
 	current->clear_child_tid = tidptr;
 
@@ -1603,7 +1601,7 @@
  * constructed. Here we are modifying the current, active,
  * task_struct.
  */
-asmlinkage long sys_unshare(unsigned long unshare_flags)
+SYSCALL_DEFINE1(unshare, unsigned long, unshare_flags)
 {
 	int err = 0;
 	struct fs_struct *fs, *new_fs = NULL;
diff --git a/kernel/futex.c b/kernel/futex.c
index 002aa18..f89d373 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -1733,9 +1733,8 @@
  * @head: pointer to the list-head
  * @len: length of the list-head, as userspace expects
  */
-asmlinkage long
-sys_set_robust_list(struct robust_list_head __user *head,
-		    size_t len)
+SYSCALL_DEFINE2(set_robust_list, struct robust_list_head __user *, head,
+		size_t, len)
 {
 	if (!futex_cmpxchg_enabled)
 		return -ENOSYS;
@@ -1756,9 +1755,9 @@
  * @head_ptr: pointer to a list-head pointer, the kernel fills it in
  * @len_ptr: pointer to a length field, the kernel fills in the header size
  */
-asmlinkage long
-sys_get_robust_list(int pid, struct robust_list_head __user * __user *head_ptr,
-		    size_t __user *len_ptr)
+SYSCALL_DEFINE3(get_robust_list, int, pid,
+		struct robust_list_head __user * __user *, head_ptr,
+		size_t __user *, len_ptr)
 {
 	struct robust_list_head __user *head;
 	unsigned long ret;
@@ -1978,9 +1977,9 @@
 }
 
 
-asmlinkage long sys_futex(u32 __user *uaddr, int op, u32 val,
-			  struct timespec __user *utime, u32 __user *uaddr2,
-			  u32 val3)
+SYSCALL_DEFINE6(futex, u32 __user *, uaddr, int, op, u32, val,
+		struct timespec __user *, utime, u32 __user *, uaddr2,
+		u32, val3)
 {
 	struct timespec ts;
 	ktime_t t, *tp = NULL;
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index 1455b76..f33afb0 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -614,7 +614,9 @@
  */
 void hres_timers_resume(void)
 {
-	/* Retrigger the CPU local events: */
+	WARN_ONCE(!irqs_disabled(),
+		  KERN_INFO "hres_timers_resume() called with IRQs enabled!");
+
 	retrigger_next_event(NULL);
 }
 
@@ -1467,8 +1469,8 @@
 	return ret;
 }
 
-asmlinkage long
-sys_nanosleep(struct timespec __user *rqtp, struct timespec __user *rmtp)
+SYSCALL_DEFINE2(nanosleep, struct timespec __user *, rqtp,
+		struct timespec __user *, rmtp)
 {
 	struct timespec tu;
 
diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c
index c20db0b..3aba8d1 100644
--- a/kernel/irq/handle.c
+++ b/kernel/irq/handle.c
@@ -39,6 +39,18 @@
 	ack_bad_irq(irq);
 }
 
+#if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS)
+static void __init init_irq_default_affinity(void)
+{
+	alloc_bootmem_cpumask_var(&irq_default_affinity);
+	cpumask_setall(irq_default_affinity);
+}
+#else
+static void __init init_irq_default_affinity(void)
+{
+}
+#endif
+
 /*
  * Linux has a controller-independent interrupt architecture.
  * Every controller has a 'controller-template', that is used
@@ -134,6 +146,8 @@
 	int legacy_count;
 	int i;
 
+	init_irq_default_affinity();
+
 	desc = irq_desc_legacy;
 	legacy_count = ARRAY_SIZE(irq_desc_legacy);
 
@@ -219,6 +233,8 @@
 	int count;
 	int i;
 
+	init_irq_default_affinity();
+
 	desc = irq_desc;
 	count = ARRAY_SIZE(irq_desc);
 
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index cd0cd8d..291f036 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -15,17 +15,9 @@
 
 #include "internals.h"
 
-#ifdef CONFIG_SMP
+#if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS)
 cpumask_var_t irq_default_affinity;
 
-static int init_irq_default_affinity(void)
-{
-	alloc_cpumask_var(&irq_default_affinity, GFP_KERNEL);
-	cpumask_setall(irq_default_affinity);
-	return 0;
-}
-core_initcall(init_irq_default_affinity);
-
 /**
  *	synchronize_irq - wait for pending IRQ handlers (on other CPUs)
  *	@irq: interrupt number to wait for
diff --git a/kernel/itimer.c b/kernel/itimer.c
index db7c358..6a5fe93 100644
--- a/kernel/itimer.c
+++ b/kernel/itimer.c
@@ -100,7 +100,7 @@
 	return 0;
 }
 
-asmlinkage long sys_getitimer(int which, struct itimerval __user *value)
+SYSCALL_DEFINE2(getitimer, int, which, struct itimerval __user *, value)
 {
 	int error = -EFAULT;
 	struct itimerval get_buffer;
@@ -260,9 +260,8 @@
 	return it_old.it_value.tv_sec;
 }
 
-asmlinkage long sys_setitimer(int which,
-			      struct itimerval __user *value,
-			      struct itimerval __user *ovalue)
+SYSCALL_DEFINE3(setitimer, int, which, struct itimerval __user *, value,
+		struct itimerval __user *, ovalue)
 {
 	struct itimerval set_buffer, get_buffer;
 	int error;
diff --git a/kernel/kallsyms.c b/kernel/kallsyms.c
index e694afa..7b8b0f2 100644
--- a/kernel/kallsyms.c
+++ b/kernel/kallsyms.c
@@ -30,19 +30,20 @@
 #define all_var 0
 #endif
 
-extern const unsigned long kallsyms_addresses[];
-extern const u8 kallsyms_names[];
+/* These will be re-linked against their real values during the second link stage */
+extern const unsigned long kallsyms_addresses[] __attribute__((weak));
+extern const u8 kallsyms_names[] __attribute__((weak));
 
 /* tell the compiler that the count isn't in the small data section if the arch
  * has one (eg: FRV)
  */
 extern const unsigned long kallsyms_num_syms
-	__attribute__((__section__(".rodata")));
+__attribute__((weak, section(".rodata")));
 
-extern const u8 kallsyms_token_table[];
-extern const u16 kallsyms_token_index[];
+extern const u8 kallsyms_token_table[] __attribute__((weak));
+extern const u16 kallsyms_token_index[] __attribute__((weak));
 
-extern const unsigned long kallsyms_markers[];
+extern const unsigned long kallsyms_markers[] __attribute__((weak));
 
 static inline int is_kernel_inittext(unsigned long addr)
 {
@@ -167,6 +168,9 @@
 	unsigned long symbol_start = 0, symbol_end = 0;
 	unsigned long i, low, high, mid;
 
+	/* This kernel should never had been booted. */
+	BUG_ON(!kallsyms_addresses);
+
 	/* do a binary search on the sorted kallsyms_addresses array */
 	low = 0;
 	high = kallsyms_num_syms;
diff --git a/kernel/kexec.c b/kernel/kexec.c
index 3fb855a..8a6d7b0 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -934,9 +934,8 @@
 
 static DEFINE_MUTEX(kexec_mutex);
 
-asmlinkage long sys_kexec_load(unsigned long entry, unsigned long nr_segments,
-				struct kexec_segment __user *segments,
-				unsigned long flags)
+SYSCALL_DEFINE4(kexec_load, unsigned long, entry, unsigned long, nr_segments,
+		struct kexec_segment __user *, segments, unsigned long, flags)
 {
 	struct kimage **dest_image, *image;
 	int result;
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index 1b9cbdc..7ba8cd9 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -123,7 +123,7 @@
 static int __kprobes check_safety(void)
 {
 	int ret = 0;
-#if defined(CONFIG_PREEMPT) && defined(CONFIG_PM)
+#if defined(CONFIG_PREEMPT) && defined(CONFIG_FREEZER)
 	ret = freeze_processes();
 	if (ret == 0) {
 		struct task_struct *p, *q;
diff --git a/kernel/module.c b/kernel/module.c
index c9332c9..e8b51d4 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -743,8 +743,8 @@
 	mutex_lock(&module_mutex);
 }
 
-asmlinkage long
-sys_delete_module(const char __user *name_user, unsigned int flags)
+SYSCALL_DEFINE2(delete_module, const char __user *, name_user,
+		unsigned int, flags)
 {
 	struct module *mod;
 	char name[MODULE_NAME_LEN];
@@ -2296,10 +2296,8 @@
 }
 
 /* This is where the real work happens */
-asmlinkage long
-sys_init_module(void __user *umod,
-		unsigned long len,
-		const char __user *uargs)
+SYSCALL_DEFINE3(init_module, void __user *, umod,
+		unsigned long, len, const char __user *, uargs)
 {
 	struct module *mod;
 	int ret = 0;
diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c
index 157de3a..fa07da9 100644
--- a/kernel/posix-cpu-timers.c
+++ b/kernel/posix-cpu-timers.c
@@ -10,76 +10,6 @@
 #include <linux/kernel_stat.h>
 
 /*
- * Allocate the thread_group_cputime structure appropriately and fill in the
- * current values of the fields.  Called from copy_signal() via
- * thread_group_cputime_clone_thread() when adding a second or subsequent
- * thread to a thread group.  Assumes interrupts are enabled when called.
- */
-int thread_group_cputime_alloc(struct task_struct *tsk)
-{
-	struct signal_struct *sig = tsk->signal;
-	struct task_cputime *cputime;
-
-	/*
-	 * If we have multiple threads and we don't already have a
-	 * per-CPU task_cputime struct (checked in the caller), allocate
-	 * one and fill it in with the times accumulated so far.  We may
-	 * race with another thread so recheck after we pick up the sighand
-	 * lock.
-	 */
-	cputime = alloc_percpu(struct task_cputime);
-	if (cputime == NULL)
-		return -ENOMEM;
-	spin_lock_irq(&tsk->sighand->siglock);
-	if (sig->cputime.totals) {
-		spin_unlock_irq(&tsk->sighand->siglock);
-		free_percpu(cputime);
-		return 0;
-	}
-	sig->cputime.totals = cputime;
-	cputime = per_cpu_ptr(sig->cputime.totals, smp_processor_id());
-	cputime->utime = tsk->utime;
-	cputime->stime = tsk->stime;
-	cputime->sum_exec_runtime = tsk->se.sum_exec_runtime;
-	spin_unlock_irq(&tsk->sighand->siglock);
-	return 0;
-}
-
-/**
- * thread_group_cputime - Sum the thread group time fields across all CPUs.
- *
- * @tsk:	The task we use to identify the thread group.
- * @times:	task_cputime structure in which we return the summed fields.
- *
- * Walk the list of CPUs to sum the per-CPU time fields in the thread group
- * time structure.
- */
-void thread_group_cputime(
-	struct task_struct *tsk,
-	struct task_cputime *times)
-{
-	struct task_cputime *totals, *tot;
-	int i;
-
-	totals = tsk->signal->cputime.totals;
-	if (!totals) {
-		times->utime = tsk->utime;
-		times->stime = tsk->stime;
-		times->sum_exec_runtime = tsk->se.sum_exec_runtime;
-		return;
-	}
-
-	times->stime = times->utime = cputime_zero;
-	times->sum_exec_runtime = 0;
-	for_each_possible_cpu(i) {
-		tot = per_cpu_ptr(totals, i);
-		times->utime = cputime_add(times->utime, tot->utime);
-		times->stime = cputime_add(times->stime, tot->stime);
-		times->sum_exec_runtime += tot->sum_exec_runtime;
-	}
-}
-
-/*
  * Called after updating RLIMIT_CPU to set timer expiration if necessary.
  */
 void update_rlimit_cpu(unsigned long rlim_new)
diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c
index 887c637..052ec4d 100644
--- a/kernel/posix-timers.c
+++ b/kernel/posix-timers.c
@@ -477,10 +477,9 @@
 
 /* Create a POSIX.1b interval timer. */
 
-asmlinkage long
-sys_timer_create(const clockid_t which_clock,
-		 struct sigevent __user *timer_event_spec,
-		 timer_t __user * created_timer_id)
+SYSCALL_DEFINE3(timer_create, const clockid_t, which_clock,
+		struct sigevent __user *, timer_event_spec,
+		timer_t __user *, created_timer_id)
 {
 	struct k_itimer *new_timer;
 	int error, new_timer_id;
@@ -661,8 +660,8 @@
 }
 
 /* Get the time remaining on a POSIX.1b interval timer. */
-asmlinkage long
-sys_timer_gettime(timer_t timer_id, struct itimerspec __user *setting)
+SYSCALL_DEFINE2(timer_gettime, timer_t, timer_id,
+		struct itimerspec __user *, setting)
 {
 	struct k_itimer *timr;
 	struct itimerspec cur_setting;
@@ -691,8 +690,7 @@
  * the call back to do_schedule_next_timer().  So all we need to do is
  * to pick up the frozen overrun.
  */
-asmlinkage long
-sys_timer_getoverrun(timer_t timer_id)
+SYSCALL_DEFINE1(timer_getoverrun, timer_t, timer_id)
 {
 	struct k_itimer *timr;
 	int overrun;
@@ -760,10 +758,9 @@
 }
 
 /* Set a POSIX.1b interval timer */
-asmlinkage long
-sys_timer_settime(timer_t timer_id, int flags,
-		  const struct itimerspec __user *new_setting,
-		  struct itimerspec __user *old_setting)
+SYSCALL_DEFINE4(timer_settime, timer_t, timer_id, int, flags,
+		const struct itimerspec __user *, new_setting,
+		struct itimerspec __user *, old_setting)
 {
 	struct k_itimer *timr;
 	struct itimerspec new_spec, old_spec;
@@ -816,8 +813,7 @@
 }
 
 /* Delete a POSIX.1b interval timer. */
-asmlinkage long
-sys_timer_delete(timer_t timer_id)
+SYSCALL_DEFINE1(timer_delete, timer_t, timer_id)
 {
 	struct k_itimer *timer;
 	unsigned long flags;
@@ -903,8 +899,8 @@
 }
 EXPORT_SYMBOL_GPL(do_posix_clock_nonanosleep);
 
-asmlinkage long sys_clock_settime(const clockid_t which_clock,
-				  const struct timespec __user *tp)
+SYSCALL_DEFINE2(clock_settime, const clockid_t, which_clock,
+		const struct timespec __user *, tp)
 {
 	struct timespec new_tp;
 
@@ -916,8 +912,8 @@
 	return CLOCK_DISPATCH(which_clock, clock_set, (which_clock, &new_tp));
 }
 
-asmlinkage long
-sys_clock_gettime(const clockid_t which_clock, struct timespec __user *tp)
+SYSCALL_DEFINE2(clock_gettime, const clockid_t, which_clock,
+		struct timespec __user *,tp)
 {
 	struct timespec kernel_tp;
 	int error;
@@ -933,8 +929,8 @@
 
 }
 
-asmlinkage long
-sys_clock_getres(const clockid_t which_clock, struct timespec __user *tp)
+SYSCALL_DEFINE2(clock_getres, const clockid_t, which_clock,
+		struct timespec __user *, tp)
 {
 	struct timespec rtn_tp;
 	int error;
@@ -963,10 +959,9 @@
 				 which_clock);
 }
 
-asmlinkage long
-sys_clock_nanosleep(const clockid_t which_clock, int flags,
-		    const struct timespec __user *rqtp,
-		    struct timespec __user *rmtp)
+SYSCALL_DEFINE4(clock_nanosleep, const clockid_t, which_clock, int, flags,
+		const struct timespec __user *, rqtp,
+		struct timespec __user *, rmtp)
 {
 	struct timespec t;
 
diff --git a/kernel/power/Makefile b/kernel/power/Makefile
index 597823b..d7a1016 100644
--- a/kernel/power/Makefile
+++ b/kernel/power/Makefile
@@ -4,7 +4,8 @@
 endif
 
 obj-y				:= main.o
-obj-$(CONFIG_PM_SLEEP)		+= process.o console.o
+obj-$(CONFIG_PM_SLEEP)		+= console.o
+obj-$(CONFIG_FREEZER)		+= process.o
 obj-$(CONFIG_HIBERNATION)	+= swsusp.o disk.o snapshot.o swap.o user.o
 
 obj-$(CONFIG_MAGIC_SYSRQ)	+= poweroff.o
diff --git a/kernel/power/disk.c b/kernel/power/disk.c
index 45e8541..432ee57 100644
--- a/kernel/power/disk.c
+++ b/kernel/power/disk.c
@@ -71,6 +71,14 @@
 	mutex_unlock(&pm_mutex);
 }
 
+static bool entering_platform_hibernation;
+
+bool system_entering_hibernation(void)
+{
+	return entering_platform_hibernation;
+}
+EXPORT_SYMBOL(system_entering_hibernation);
+
 #ifdef CONFIG_PM_DEBUG
 static void hibernation_debug_sleep(void)
 {
@@ -411,6 +419,7 @@
 	if (error)
 		goto Close;
 
+	entering_platform_hibernation = true;
 	suspend_console();
 	error = device_suspend(PMSG_HIBERNATE);
 	if (error) {
@@ -445,6 +454,7 @@
  Finish:
 	hibernation_ops->finish();
  Resume_devices:
+	entering_platform_hibernation = false;
 	device_resume(PMSG_RESTORE);
 	resume_console();
  Close:
diff --git a/kernel/printk.c b/kernel/printk.c
index 7015733..69188f2 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -382,7 +382,7 @@
 	return error;
 }
 
-asmlinkage long sys_syslog(int type, char __user *buf, int len)
+SYSCALL_DEFINE3(syslog, int, type, char __user *, buf, int, len)
 {
 	return do_syslog(type, buf, len);
 }
@@ -742,11 +742,6 @@
 
 #else
 
-asmlinkage long sys_syslog(int type, char __user *buf, int len)
-{
-	return -ENOSYS;
-}
-
 static void call_console_drivers(unsigned start, unsigned end)
 {
 }
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 29dc700..c9cf48b 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -574,7 +574,7 @@
 #define arch_ptrace_attach(child)	do { } while (0)
 #endif
 
-asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
+SYSCALL_DEFINE4(ptrace, long, request, long, pid, long, addr, long, data)
 {
 	struct task_struct *child;
 	long ret;
diff --git a/kernel/rcuclassic.c b/kernel/rcuclassic.c
index 490934f..bd5a900 100644
--- a/kernel/rcuclassic.c
+++ b/kernel/rcuclassic.c
@@ -716,7 +716,7 @@
 	raise_rcu_softirq();
 }
 
-static void rcu_init_percpu_data(int cpu, struct rcu_ctrlblk *rcp,
+static void __cpuinit rcu_init_percpu_data(int cpu, struct rcu_ctrlblk *rcp,
 						struct rcu_data *rdp)
 {
 	unsigned long flags;
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index f2d8638..b2fd602 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -1314,7 +1314,7 @@
  * access due to the fact that this CPU cannot possibly have any RCU
  * callbacks in flight yet.
  */
-static void
+static void __cpuinit
 rcu_init_percpu_data(int cpu, struct rcu_state *rsp)
 {
 	unsigned long flags;
diff --git a/kernel/relay.c b/kernel/relay.c
index 09ac200..9d79b78 100644
--- a/kernel/relay.c
+++ b/kernel/relay.c
@@ -663,8 +663,10 @@
 
 	mutex_lock(&relay_channels_mutex);
 	/* Is chan already set up? */
-	if (unlikely(chan->has_base_filename))
+	if (unlikely(chan->has_base_filename)) {
+		mutex_unlock(&relay_channels_mutex);
 		return -EEXIST;
+	}
 	chan->has_base_filename = 1;
 	chan->parent = parent;
 	curr_cpu = get_cpu();
diff --git a/kernel/resource.c b/kernel/resource.c
index ca6a153..fd5d7d5 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -620,6 +620,7 @@
  * @start: resource start address
  * @n: resource region size
  * @name: reserving caller's ID string
+ * @flags: IO resource flags
  */
 struct resource * __request_region(struct resource *parent,
 				   resource_size_t start, resource_size_t n,
diff --git a/kernel/sched.c b/kernel/sched.c
index 8be2c13..52bbf1c 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -1323,8 +1323,8 @@
  * slice expiry etc.
  */
 
-#define WEIGHT_IDLEPRIO		2
-#define WMULT_IDLEPRIO		(1 << 31)
+#define WEIGHT_IDLEPRIO                3
+#define WMULT_IDLEPRIO         1431655765
 
 /*
  * Nice levels are multiplicative, with a gentle 10% change for every
@@ -4440,7 +4440,7 @@
 	/*
 	 * Underflow?
 	 */
-       if (DEBUG_LOCKS_WARN_ON(val > preempt_count() - (!!kernel_locked())))
+	if (DEBUG_LOCKS_WARN_ON(val > preempt_count()))
 		return;
 	/*
 	 * Is the spinlock portion underflowing?
@@ -5126,7 +5126,7 @@
  * sys_setpriority is a more generic, but much slower function that
  * does similar things.
  */
-asmlinkage long sys_nice(int increment)
+SYSCALL_DEFINE1(nice, int, increment)
 {
 	long nice, retval;
 
@@ -5433,8 +5433,8 @@
  * @policy: new policy.
  * @param: structure containing the new RT priority.
  */
-asmlinkage long
-sys_sched_setscheduler(pid_t pid, int policy, struct sched_param __user *param)
+SYSCALL_DEFINE3(sched_setscheduler, pid_t, pid, int, policy,
+		struct sched_param __user *, param)
 {
 	/* negative values for policy are not valid */
 	if (policy < 0)
@@ -5448,7 +5448,7 @@
  * @pid: the pid in question.
  * @param: structure containing the new RT priority.
  */
-asmlinkage long sys_sched_setparam(pid_t pid, struct sched_param __user *param)
+SYSCALL_DEFINE2(sched_setparam, pid_t, pid, struct sched_param __user *, param)
 {
 	return do_sched_setscheduler(pid, -1, param);
 }
@@ -5457,7 +5457,7 @@
  * sys_sched_getscheduler - get the policy (scheduling class) of a thread
  * @pid: the pid in question.
  */
-asmlinkage long sys_sched_getscheduler(pid_t pid)
+SYSCALL_DEFINE1(sched_getscheduler, pid_t, pid)
 {
 	struct task_struct *p;
 	int retval;
@@ -5482,7 +5482,7 @@
  * @pid: the pid in question.
  * @param: structure containing the RT priority.
  */
-asmlinkage long sys_sched_getparam(pid_t pid, struct sched_param __user *param)
+SYSCALL_DEFINE2(sched_getparam, pid_t, pid, struct sched_param __user *, param)
 {
 	struct sched_param lp;
 	struct task_struct *p;
@@ -5600,8 +5600,8 @@
  * @len: length in bytes of the bitmask pointed to by user_mask_ptr
  * @user_mask_ptr: user-space pointer to the new cpu mask
  */
-asmlinkage long sys_sched_setaffinity(pid_t pid, unsigned int len,
-				      unsigned long __user *user_mask_ptr)
+SYSCALL_DEFINE3(sched_setaffinity, pid_t, pid, unsigned int, len,
+		unsigned long __user *, user_mask_ptr)
 {
 	cpumask_var_t new_mask;
 	int retval;
@@ -5648,8 +5648,8 @@
  * @len: length in bytes of the bitmask pointed to by user_mask_ptr
  * @user_mask_ptr: user-space pointer to hold the current cpu mask
  */
-asmlinkage long sys_sched_getaffinity(pid_t pid, unsigned int len,
-				      unsigned long __user *user_mask_ptr)
+SYSCALL_DEFINE3(sched_getaffinity, pid_t, pid, unsigned int, len,
+		unsigned long __user *, user_mask_ptr)
 {
 	int ret;
 	cpumask_var_t mask;
@@ -5678,7 +5678,7 @@
  * This function yields the current CPU to other tasks. If there are no
  * other threads running on this CPU then this function will return.
  */
-asmlinkage long sys_sched_yield(void)
+SYSCALL_DEFINE0(sched_yield)
 {
 	struct rq *rq = this_rq_lock();
 
@@ -5819,7 +5819,7 @@
  * this syscall returns the maximum rt_priority that can be used
  * by a given scheduling class.
  */
-asmlinkage long sys_sched_get_priority_max(int policy)
+SYSCALL_DEFINE1(sched_get_priority_max, int, policy)
 {
 	int ret = -EINVAL;
 
@@ -5844,7 +5844,7 @@
  * this syscall returns the minimum rt_priority that can be used
  * by a given scheduling class.
  */
-asmlinkage long sys_sched_get_priority_min(int policy)
+SYSCALL_DEFINE1(sched_get_priority_min, int, policy)
 {
 	int ret = -EINVAL;
 
@@ -5869,8 +5869,8 @@
  * this syscall writes the default timeslice value of a given process
  * into the user-space timespec buffer. A value of '0' means infinity.
  */
-asmlinkage
-long sys_sched_rr_get_interval(pid_t pid, struct timespec __user *interval)
+SYSCALL_DEFINE2(sched_rr_get_interval, pid_t, pid,
+		struct timespec __user *, interval)
 {
 	struct task_struct *p;
 	unsigned int time_slice;
@@ -9050,6 +9050,13 @@
 		runtime = d->rt_runtime;
 	}
 
+#ifdef CONFIG_USER_SCHED
+	if (tg == &root_task_group) {
+		period = global_rt_period();
+		runtime = global_rt_runtime();
+	}
+#endif
+
 	/*
 	 * Cannot have more runtime than the period.
 	 */
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index 8e1352c..5cc1c16 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -283,7 +283,7 @@
 						   struct sched_entity,
 						   run_node);
 
-		if (vruntime == cfs_rq->min_vruntime)
+		if (!cfs_rq->curr)
 			vruntime = se->vruntime;
 		else
 			vruntime = min_vruntime(vruntime, se->vruntime);
@@ -429,7 +429,10 @@
 	u64 slice = __sched_period(cfs_rq->nr_running + !se->on_rq);
 
 	for_each_sched_entity(se) {
-		struct load_weight *load = &cfs_rq->load;
+		struct load_weight *load;
+
+		cfs_rq = cfs_rq_of(se);
+		load = &cfs_rq->load;
 
 		if (unlikely(!se->on_rq)) {
 			struct load_weight lw = cfs_rq->load;
@@ -677,9 +680,13 @@
 			unsigned long thresh = sysctl_sched_latency;
 
 			/*
-			 * convert the sleeper threshold into virtual time
+			 * Convert the sleeper threshold into virtual time.
+			 * SCHED_IDLE is a special sub-class.  We care about
+			 * fairness only relative to other SCHED_IDLE tasks,
+			 * all of which have the same weight.
 			 */
-			if (sched_feat(NORMALIZED_SLEEPER))
+			if (sched_feat(NORMALIZED_SLEEPER) &&
+					task_of(se)->policy != SCHED_IDLE)
 				thresh = calc_delta_fair(thresh, se);
 
 			vruntime -= thresh;
@@ -1340,14 +1347,18 @@
 
 static void set_last_buddy(struct sched_entity *se)
 {
-	for_each_sched_entity(se)
-		cfs_rq_of(se)->last = se;
+	if (likely(task_of(se)->policy != SCHED_IDLE)) {
+		for_each_sched_entity(se)
+			cfs_rq_of(se)->last = se;
+	}
 }
 
 static void set_next_buddy(struct sched_entity *se)
 {
-	for_each_sched_entity(se)
-		cfs_rq_of(se)->next = se;
+	if (likely(task_of(se)->policy != SCHED_IDLE)) {
+		for_each_sched_entity(se)
+			cfs_rq_of(se)->next = se;
+	}
 }
 
 /*
@@ -1393,12 +1404,18 @@
 		return;
 
 	/*
-	 * Batch tasks do not preempt (their preemption is driven by
+	 * Batch and idle tasks do not preempt (their preemption is driven by
 	 * the tick):
 	 */
-	if (unlikely(p->policy == SCHED_BATCH))
+	if (unlikely(p->policy != SCHED_NORMAL))
 		return;
 
+	/* Idle tasks are by definition preempted by everybody. */
+	if (unlikely(curr->policy == SCHED_IDLE)) {
+		resched_task(curr);
+		return;
+	}
+
 	if (!sched_feat(WAKEUP_PREEMPT))
 		return;
 
diff --git a/kernel/sched_stats.h b/kernel/sched_stats.h
index f2773b5..8ab0cef 100644
--- a/kernel/sched_stats.h
+++ b/kernel/sched_stats.h
@@ -296,6 +296,7 @@
 static inline void account_group_user_time(struct task_struct *tsk,
 					   cputime_t cputime)
 {
+	struct task_cputime *times;
 	struct signal_struct *sig;
 
 	/* tsk == current, ensure it is safe to use ->signal */
@@ -303,13 +304,11 @@
 		return;
 
 	sig = tsk->signal;
-	if (sig->cputime.totals) {
-		struct task_cputime *times;
+	times = &sig->cputime.totals;
 
-		times = per_cpu_ptr(sig->cputime.totals, get_cpu());
-		times->utime = cputime_add(times->utime, cputime);
-		put_cpu_no_resched();
-	}
+	spin_lock(&times->lock);
+	times->utime = cputime_add(times->utime, cputime);
+	spin_unlock(&times->lock);
 }
 
 /**
@@ -325,6 +324,7 @@
 static inline void account_group_system_time(struct task_struct *tsk,
 					     cputime_t cputime)
 {
+	struct task_cputime *times;
 	struct signal_struct *sig;
 
 	/* tsk == current, ensure it is safe to use ->signal */
@@ -332,13 +332,11 @@
 		return;
 
 	sig = tsk->signal;
-	if (sig->cputime.totals) {
-		struct task_cputime *times;
+	times = &sig->cputime.totals;
 
-		times = per_cpu_ptr(sig->cputime.totals, get_cpu());
-		times->stime = cputime_add(times->stime, cputime);
-		put_cpu_no_resched();
-	}
+	spin_lock(&times->lock);
+	times->stime = cputime_add(times->stime, cputime);
+	spin_unlock(&times->lock);
 }
 
 /**
@@ -354,6 +352,7 @@
 static inline void account_group_exec_runtime(struct task_struct *tsk,
 					      unsigned long long ns)
 {
+	struct task_cputime *times;
 	struct signal_struct *sig;
 
 	sig = tsk->signal;
@@ -362,11 +361,9 @@
 	if (unlikely(!sig))
 		return;
 
-	if (sig->cputime.totals) {
-		struct task_cputime *times;
+	times = &sig->cputime.totals;
 
-		times = per_cpu_ptr(sig->cputime.totals, get_cpu());
-		times->sum_exec_runtime += ns;
-		put_cpu_no_resched();
-	}
+	spin_lock(&times->lock);
+	times->sum_exec_runtime += ns;
+	spin_unlock(&times->lock);
 }
diff --git a/kernel/signal.c b/kernel/signal.c
index 3152ac3..e737597 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1961,7 +1961,7 @@
  * System call entry points.
  */
 
-asmlinkage long sys_restart_syscall(void)
+SYSCALL_DEFINE0(restart_syscall)
 {
 	struct restart_block *restart = &current_thread_info()->restart_block;
 	return restart->fn(restart);
@@ -2014,8 +2014,8 @@
 	return error;
 }
 
-asmlinkage long
-sys_rt_sigprocmask(int how, sigset_t __user *set, sigset_t __user *oset, size_t sigsetsize)
+SYSCALL_DEFINE4(rt_sigprocmask, int, how, sigset_t __user *, set,
+		sigset_t __user *, oset, size_t, sigsetsize)
 {
 	int error = -EINVAL;
 	sigset_t old_set, new_set;
@@ -2074,8 +2074,7 @@
 	return error;
 }	
 
-asmlinkage long
-sys_rt_sigpending(sigset_t __user *set, size_t sigsetsize)
+SYSCALL_DEFINE2(rt_sigpending, sigset_t __user *, set, size_t, sigsetsize)
 {
 	return do_sigpending(set, sigsetsize);
 }
@@ -2146,11 +2145,9 @@
 
 #endif
 
-asmlinkage long
-sys_rt_sigtimedwait(const sigset_t __user *uthese,
-		    siginfo_t __user *uinfo,
-		    const struct timespec __user *uts,
-		    size_t sigsetsize)
+SYSCALL_DEFINE4(rt_sigtimedwait, const sigset_t __user *, uthese,
+		siginfo_t __user *, uinfo, const struct timespec __user *, uts,
+		size_t, sigsetsize)
 {
 	int ret, sig;
 	sigset_t these;
@@ -2223,8 +2220,7 @@
 	return ret;
 }
 
-asmlinkage long
-sys_kill(pid_t pid, int sig)
+SYSCALL_DEFINE2(kill, pid_t, pid, int, sig)
 {
 	struct siginfo info;
 
@@ -2283,7 +2279,7 @@
  *  exists but it's not belonging to the target process anymore. This
  *  method solves the problem of threads exiting and PIDs getting reused.
  */
-asmlinkage long sys_tgkill(pid_t tgid, pid_t pid, int sig)
+SYSCALL_DEFINE3(tgkill, pid_t, tgid, pid_t, pid, int, sig)
 {
 	/* This is only valid for single tasks */
 	if (pid <= 0 || tgid <= 0)
@@ -2295,8 +2291,7 @@
 /*
  *  Send a signal to only one task, even if it's a CLONE_THREAD task.
  */
-asmlinkage long
-sys_tkill(pid_t pid, int sig)
+SYSCALL_DEFINE2(tkill, pid_t, pid, int, sig)
 {
 	/* This is only valid for single tasks */
 	if (pid <= 0)
@@ -2305,8 +2300,8 @@
 	return do_tkill(0, pid, sig);
 }
 
-asmlinkage long
-sys_rt_sigqueueinfo(pid_t pid, int sig, siginfo_t __user *uinfo)
+SYSCALL_DEFINE3(rt_sigqueueinfo, pid_t, pid, int, sig,
+		siginfo_t __user *, uinfo)
 {
 	siginfo_t info;
 
@@ -2434,8 +2429,7 @@
 
 #ifdef __ARCH_WANT_SYS_SIGPENDING
 
-asmlinkage long
-sys_sigpending(old_sigset_t __user *set)
+SYSCALL_DEFINE1(sigpending, old_sigset_t __user *, set)
 {
 	return do_sigpending(set, sizeof(*set));
 }
@@ -2446,8 +2440,8 @@
 /* Some platforms have their own version with special arguments others
    support only sys_rt_sigprocmask.  */
 
-asmlinkage long
-sys_sigprocmask(int how, old_sigset_t __user *set, old_sigset_t __user *oset)
+SYSCALL_DEFINE3(sigprocmask, int, how, old_sigset_t __user *, set,
+		old_sigset_t __user *, oset)
 {
 	int error;
 	old_sigset_t old_set, new_set;
@@ -2497,11 +2491,10 @@
 #endif /* __ARCH_WANT_SYS_SIGPROCMASK */
 
 #ifdef __ARCH_WANT_SYS_RT_SIGACTION
-asmlinkage long
-sys_rt_sigaction(int sig,
-		 const struct sigaction __user *act,
-		 struct sigaction __user *oact,
-		 size_t sigsetsize)
+SYSCALL_DEFINE4(rt_sigaction, int, sig,
+		const struct sigaction __user *, act,
+		struct sigaction __user *, oact,
+		size_t, sigsetsize)
 {
 	struct k_sigaction new_sa, old_sa;
 	int ret = -EINVAL;
@@ -2531,15 +2524,13 @@
 /*
  * For backwards compatibility.  Functionality superseded by sigprocmask.
  */
-asmlinkage long
-sys_sgetmask(void)
+SYSCALL_DEFINE0(sgetmask)
 {
 	/* SMP safe */
 	return current->blocked.sig[0];
 }
 
-asmlinkage long
-sys_ssetmask(int newmask)
+SYSCALL_DEFINE1(ssetmask, int, newmask)
 {
 	int old;
 
@@ -2559,8 +2550,7 @@
 /*
  * For backwards compatibility.  Functionality superseded by sigaction.
  */
-asmlinkage unsigned long
-sys_signal(int sig, __sighandler_t handler)
+SYSCALL_DEFINE2(signal, int, sig, __sighandler_t, handler)
 {
 	struct k_sigaction new_sa, old_sa;
 	int ret;
@@ -2577,8 +2567,7 @@
 
 #ifdef __ARCH_WANT_SYS_PAUSE
 
-asmlinkage long
-sys_pause(void)
+SYSCALL_DEFINE0(pause)
 {
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -2588,7 +2577,7 @@
 #endif
 
 #ifdef __ARCH_WANT_SYS_RT_SIGSUSPEND
-asmlinkage long sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize)
+SYSCALL_DEFINE2(rt_sigsuspend, sigset_t __user *, unewset, size_t, sigsetsize)
 {
 	sigset_t newset;
 
diff --git a/kernel/softlockup.c b/kernel/softlockup.c
index d9188c6..85d5a24 100644
--- a/kernel/softlockup.c
+++ b/kernel/softlockup.c
@@ -16,6 +16,7 @@
 #include <linux/lockdep.h>
 #include <linux/notifier.h>
 #include <linux/module.h>
+#include <linux/sysctl.h>
 
 #include <asm/irq_regs.h>
 
@@ -88,6 +89,14 @@
 }
 EXPORT_SYMBOL(touch_all_softlockup_watchdogs);
 
+int proc_dosoftlockup_thresh(struct ctl_table *table, int write,
+			     struct file *filp, void __user *buffer,
+			     size_t *lenp, loff_t *ppos)
+{
+	touch_all_softlockup_watchdogs();
+	return proc_dointvec_minmax(table, write, filp, buffer, lenp, ppos);
+}
+
 /*
  * This callback runs from the timer interrupt, and checks
  * whether the watchdog thread has hung or not:
diff --git a/kernel/sys.c b/kernel/sys.c
index 763c3c1..e7dc0e1 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -143,7 +143,7 @@
 	return error;
 }
 
-asmlinkage long sys_setpriority(int which, int who, int niceval)
+SYSCALL_DEFINE3(setpriority, int, which, int, who, int, niceval)
 {
 	struct task_struct *g, *p;
 	struct user_struct *user;
@@ -208,7 +208,7 @@
  * has been offset by 20 (ie it returns 40..1 instead of -20..19)
  * to stay compatible.
  */
-asmlinkage long sys_getpriority(int which, int who)
+SYSCALL_DEFINE2(getpriority, int, which, int, who)
 {
 	struct task_struct *g, *p;
 	struct user_struct *user;
@@ -355,7 +355,8 @@
  *
  * reboot doesn't sync: do that yourself before calling this.
  */
-asmlinkage long sys_reboot(int magic1, int magic2, unsigned int cmd, void __user * arg)
+SYSCALL_DEFINE4(reboot, int, magic1, int, magic2, unsigned int, cmd,
+		void __user *, arg)
 {
 	char buffer[256];
 
@@ -478,7 +479,7 @@
  * SMP: There are not races, the GIDs are checked only by filesystem
  *      operations (as far as semantic preservation is concerned).
  */
-asmlinkage long sys_setregid(gid_t rgid, gid_t egid)
+SYSCALL_DEFINE2(setregid, gid_t, rgid, gid_t, egid)
 {
 	const struct cred *old;
 	struct cred *new;
@@ -529,7 +530,7 @@
  *
  * SMP: Same implicit races as above.
  */
-asmlinkage long sys_setgid(gid_t gid)
+SYSCALL_DEFINE1(setgid, gid_t, gid)
 {
 	const struct cred *old;
 	struct cred *new;
@@ -597,7 +598,7 @@
  * 100% compatible with BSD.  A program which uses just setuid() will be
  * 100% compatible with POSIX with saved IDs. 
  */
-asmlinkage long sys_setreuid(uid_t ruid, uid_t euid)
+SYSCALL_DEFINE2(setreuid, uid_t, ruid, uid_t, euid)
 {
 	const struct cred *old;
 	struct cred *new;
@@ -661,7 +662,7 @@
  * will allow a root program to temporarily drop privileges and be able to
  * regain them by swapping the real and effective uid.  
  */
-asmlinkage long sys_setuid(uid_t uid)
+SYSCALL_DEFINE1(setuid, uid_t, uid)
 {
 	const struct cred *old;
 	struct cred *new;
@@ -705,7 +706,7 @@
  * This function implements a generic ability to update ruid, euid,
  * and suid.  This allows you to implement the 4.4 compatible seteuid().
  */
-asmlinkage long sys_setresuid(uid_t ruid, uid_t euid, uid_t suid)
+SYSCALL_DEFINE3(setresuid, uid_t, ruid, uid_t, euid, uid_t, suid)
 {
 	const struct cred *old;
 	struct cred *new;
@@ -756,7 +757,7 @@
 	return retval;
 }
 
-asmlinkage long sys_getresuid(uid_t __user *ruid, uid_t __user *euid, uid_t __user *suid)
+SYSCALL_DEFINE3(getresuid, uid_t __user *, ruid, uid_t __user *, euid, uid_t __user *, suid)
 {
 	const struct cred *cred = current_cred();
 	int retval;
@@ -771,7 +772,7 @@
 /*
  * Same as above, but for rgid, egid, sgid.
  */
-asmlinkage long sys_setresgid(gid_t rgid, gid_t egid, gid_t sgid)
+SYSCALL_DEFINE3(setresgid, gid_t, rgid, gid_t, egid, gid_t, sgid)
 {
 	const struct cred *old;
 	struct cred *new;
@@ -814,7 +815,7 @@
 	return retval;
 }
 
-asmlinkage long sys_getresgid(gid_t __user *rgid, gid_t __user *egid, gid_t __user *sgid)
+SYSCALL_DEFINE3(getresgid, gid_t __user *, rgid, gid_t __user *, egid, gid_t __user *, sgid)
 {
 	const struct cred *cred = current_cred();
 	int retval;
@@ -833,7 +834,7 @@
  * whatever uid it wants to). It normally shadows "euid", except when
  * explicitly set by setfsuid() or for access..
  */
-asmlinkage long sys_setfsuid(uid_t uid)
+SYSCALL_DEFINE1(setfsuid, uid_t, uid)
 {
 	const struct cred *old;
 	struct cred *new;
@@ -870,7 +871,7 @@
 /*
  * Samma på svenska..
  */
-asmlinkage long sys_setfsgid(gid_t gid)
+SYSCALL_DEFINE1(setfsgid, gid_t, gid)
 {
 	const struct cred *old;
 	struct cred *new;
@@ -919,7 +920,7 @@
 	tms->tms_cstime = cputime_to_clock_t(cstime);
 }
 
-asmlinkage long sys_times(struct tms __user * tbuf)
+SYSCALL_DEFINE1(times, struct tms __user *, tbuf)
 {
 	if (tbuf) {
 		struct tms tmp;
@@ -944,7 +945,7 @@
  * Auch. Had to add the 'did_exec' flag to conform completely to POSIX.
  * LBT 04.03.94
  */
-asmlinkage long sys_setpgid(pid_t pid, pid_t pgid)
+SYSCALL_DEFINE2(setpgid, pid_t, pid, pid_t, pgid)
 {
 	struct task_struct *p;
 	struct task_struct *group_leader = current->group_leader;
@@ -1015,7 +1016,7 @@
 	return err;
 }
 
-asmlinkage long sys_getpgid(pid_t pid)
+SYSCALL_DEFINE1(getpgid, pid_t, pid)
 {
 	struct task_struct *p;
 	struct pid *grp;
@@ -1045,14 +1046,14 @@
 
 #ifdef __ARCH_WANT_SYS_GETPGRP
 
-asmlinkage long sys_getpgrp(void)
+SYSCALL_DEFINE0(getpgrp)
 {
 	return sys_getpgid(0);
 }
 
 #endif
 
-asmlinkage long sys_getsid(pid_t pid)
+SYSCALL_DEFINE1(getsid, pid_t, pid)
 {
 	struct task_struct *p;
 	struct pid *sid;
@@ -1080,7 +1081,7 @@
 	return retval;
 }
 
-asmlinkage long sys_setsid(void)
+SYSCALL_DEFINE0(setsid)
 {
 	struct task_struct *group_leader = current->group_leader;
 	struct pid *sid = task_pid(group_leader);
@@ -1311,7 +1312,7 @@
 
 EXPORT_SYMBOL(set_current_groups);
 
-asmlinkage long sys_getgroups(int gidsetsize, gid_t __user *grouplist)
+SYSCALL_DEFINE2(getgroups, int, gidsetsize, gid_t __user *, grouplist)
 {
 	const struct cred *cred = current_cred();
 	int i;
@@ -1340,7 +1341,7 @@
  *	without another task interfering.
  */
  
-asmlinkage long sys_setgroups(int gidsetsize, gid_t __user *grouplist)
+SYSCALL_DEFINE2(setgroups, int, gidsetsize, gid_t __user *, grouplist)
 {
 	struct group_info *group_info;
 	int retval;
@@ -1394,7 +1395,7 @@
 
 DECLARE_RWSEM(uts_sem);
 
-asmlinkage long sys_newuname(struct new_utsname __user * name)
+SYSCALL_DEFINE1(newuname, struct new_utsname __user *, name)
 {
 	int errno = 0;
 
@@ -1405,7 +1406,7 @@
 	return errno;
 }
 
-asmlinkage long sys_sethostname(char __user *name, int len)
+SYSCALL_DEFINE2(sethostname, char __user *, name, int, len)
 {
 	int errno;
 	char tmp[__NEW_UTS_LEN];
@@ -1429,7 +1430,7 @@
 
 #ifdef __ARCH_WANT_SYS_GETHOSTNAME
 
-asmlinkage long sys_gethostname(char __user *name, int len)
+SYSCALL_DEFINE2(gethostname, char __user *, name, int, len)
 {
 	int i, errno;
 	struct new_utsname *u;
@@ -1454,7 +1455,7 @@
  * Only setdomainname; getdomainname can be implemented by calling
  * uname()
  */
-asmlinkage long sys_setdomainname(char __user *name, int len)
+SYSCALL_DEFINE2(setdomainname, char __user *, name, int, len)
 {
 	int errno;
 	char tmp[__NEW_UTS_LEN];
@@ -1477,7 +1478,7 @@
 	return errno;
 }
 
-asmlinkage long sys_getrlimit(unsigned int resource, struct rlimit __user *rlim)
+SYSCALL_DEFINE2(getrlimit, unsigned int, resource, struct rlimit __user *, rlim)
 {
 	if (resource >= RLIM_NLIMITS)
 		return -EINVAL;
@@ -1496,7 +1497,8 @@
  *	Back compatibility for getrlimit. Needed for some apps.
  */
  
-asmlinkage long sys_old_getrlimit(unsigned int resource, struct rlimit __user *rlim)
+SYSCALL_DEFINE2(old_getrlimit, unsigned int, resource,
+		struct rlimit __user *, rlim)
 {
 	struct rlimit x;
 	if (resource >= RLIM_NLIMITS)
@@ -1514,7 +1516,7 @@
 
 #endif
 
-asmlinkage long sys_setrlimit(unsigned int resource, struct rlimit __user *rlim)
+SYSCALL_DEFINE2(setrlimit, unsigned int, resource, struct rlimit __user *, rlim)
 {
 	struct rlimit new_rlim, *old_rlim;
 	int retval;
@@ -1687,7 +1689,7 @@
 	return copy_to_user(ru, &r, sizeof(r)) ? -EFAULT : 0;
 }
 
-asmlinkage long sys_getrusage(int who, struct rusage __user *ru)
+SYSCALL_DEFINE2(getrusage, int, who, struct rusage __user *, ru)
 {
 	if (who != RUSAGE_SELF && who != RUSAGE_CHILDREN &&
 	    who != RUSAGE_THREAD)
@@ -1695,14 +1697,14 @@
 	return getrusage(current, who, ru);
 }
 
-asmlinkage long sys_umask(int mask)
+SYSCALL_DEFINE1(umask, int, mask)
 {
 	mask = xchg(&current->fs->umask, mask & S_IRWXUGO);
 	return mask;
 }
 
-asmlinkage long sys_prctl(int option, unsigned long arg2, unsigned long arg3,
-			  unsigned long arg4, unsigned long arg5)
+SYSCALL_DEFINE5(prctl, int, option, unsigned long, arg2, unsigned long, arg3,
+		unsigned long, arg4, unsigned long, arg5)
 {
 	struct task_struct *me = current;
 	unsigned char comm[sizeof(me->comm)];
@@ -1815,8 +1817,8 @@
 	return error;
 }
 
-asmlinkage long sys_getcpu(unsigned __user *cpup, unsigned __user *nodep,
-			   struct getcpu_cache __user *unused)
+SYSCALL_DEFINE3(getcpu, unsigned __user *, cpup, unsigned __user *, nodep,
+		struct getcpu_cache __user *, unused)
 {
 	int err = 0;
 	int cpu = raw_smp_processor_id();
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index e14a232..27dad29 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -131,6 +131,7 @@
 cond_syscall(sys_io_submit);
 cond_syscall(sys_io_cancel);
 cond_syscall(sys_io_getevents);
+cond_syscall(sys_syslog);
 
 /* arch-specific weak syscall entries */
 cond_syscall(sys_pciconfig_read);
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 89d7443..790f9d7 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -144,6 +144,7 @@
 
 #ifdef CONFIG_IA64
 extern int no_unaligned_warning;
+extern int unaligned_dump_stack;
 #endif
 
 #ifdef CONFIG_RT_MUTEXES
@@ -781,6 +782,14 @@
 	 	.mode		= 0644,
 		.proc_handler	= &proc_dointvec,
 	},
+	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "unaligned-dump-stack",
+		.data		= &unaligned_dump_stack,
+		.maxlen		= sizeof (int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec,
+	},
 #endif
 #ifdef CONFIG_DETECT_SOFTLOCKUP
 	{
@@ -800,7 +809,7 @@
 		.data		= &softlockup_thresh,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
+		.proc_handler	= &proc_dosoftlockup_thresh,
 		.strategy	= &sysctl_intvec,
 		.extra1		= &neg_one,
 		.extra2		= &sixty,
@@ -1688,7 +1697,7 @@
 	return error;
 }
 
-asmlinkage long sys_sysctl(struct __sysctl_args __user *args)
+SYSCALL_DEFINE1(sysctl, struct __sysctl_args __user *, args)
 {
 	struct __sysctl_args tmp;
 	int error;
@@ -2989,7 +2998,7 @@
 #else /* CONFIG_SYSCTL_SYSCALL */
 
 
-asmlinkage long sys_sysctl(struct __sysctl_args __user *args)
+SYSCALL_DEFINE1(sysctl, struct __sysctl_args __user *, args)
 {
 	struct __sysctl_args tmp;
 	int error;
diff --git a/kernel/time.c b/kernel/time.c
index 4886e3c..2951194 100644
--- a/kernel/time.c
+++ b/kernel/time.c
@@ -60,7 +60,7 @@
  * why not move it into the appropriate arch directory (for those
  * architectures that need it).
  */
-asmlinkage long sys_time(time_t __user * tloc)
+SYSCALL_DEFINE1(time, time_t __user *, tloc)
 {
 	time_t i = get_seconds();
 
@@ -79,7 +79,7 @@
  * architectures that need it).
  */
 
-asmlinkage long sys_stime(time_t __user *tptr)
+SYSCALL_DEFINE1(stime, time_t __user *, tptr)
 {
 	struct timespec tv;
 	int err;
@@ -99,8 +99,8 @@
 
 #endif /* __ARCH_WANT_SYS_TIME */
 
-asmlinkage long sys_gettimeofday(struct timeval __user *tv,
-				 struct timezone __user *tz)
+SYSCALL_DEFINE2(gettimeofday, struct timeval __user *, tv,
+		struct timezone __user *, tz)
 {
 	if (likely(tv != NULL)) {
 		struct timeval ktv;
@@ -184,8 +184,8 @@
 	return 0;
 }
 
-asmlinkage long sys_settimeofday(struct timeval __user *tv,
-				struct timezone __user *tz)
+SYSCALL_DEFINE2(settimeofday, struct timeval __user *, tv,
+		struct timezone __user *, tz)
 {
 	struct timeval user_tv;
 	struct timespec	new_ts;
@@ -205,7 +205,7 @@
 	return do_sys_settimeofday(tv ? &new_ts : NULL, tz ? &new_tz : NULL);
 }
 
-asmlinkage long sys_adjtimex(struct timex __user *txc_p)
+SYSCALL_DEFINE1(adjtimex, struct timex __user *, txc_p)
 {
 	struct timex txc;		/* Local copy of parameter */
 	int ret;
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index 1b6c05b..d3f1ef4 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -134,7 +134,7 @@
  * value. We do this unconditionally on any cpu, as we don't know whether the
  * cpu, which has the update task assigned is in a long sleep.
  */
-void tick_nohz_update_jiffies(void)
+static void tick_nohz_update_jiffies(void)
 {
 	int cpu = smp_processor_id();
 	struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu);
diff --git a/kernel/timer.c b/kernel/timer.c
index dee3f64..13dd64f 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -1129,7 +1129,7 @@
  * For backwards compatibility?  This can be done in libc so Alpha
  * and all newer ports shouldn't need it.
  */
-asmlinkage unsigned long sys_alarm(unsigned int seconds)
+SYSCALL_DEFINE1(alarm, unsigned int, seconds)
 {
 	return alarm_setitimer(seconds);
 }
@@ -1152,7 +1152,7 @@
  *
  * This is SMP safe as current->tgid does not change.
  */
-asmlinkage long sys_getpid(void)
+SYSCALL_DEFINE0(getpid)
 {
 	return task_tgid_vnr(current);
 }
@@ -1163,7 +1163,7 @@
  * value of ->real_parent under rcu_read_lock(), see
  * release_task()->call_rcu(delayed_put_task_struct).
  */
-asmlinkage long sys_getppid(void)
+SYSCALL_DEFINE0(getppid)
 {
 	int pid;
 
@@ -1174,25 +1174,25 @@
 	return pid;
 }
 
-asmlinkage long sys_getuid(void)
+SYSCALL_DEFINE0(getuid)
 {
 	/* Only we change this so SMP safe */
 	return current_uid();
 }
 
-asmlinkage long sys_geteuid(void)
+SYSCALL_DEFINE0(geteuid)
 {
 	/* Only we change this so SMP safe */
 	return current_euid();
 }
 
-asmlinkage long sys_getgid(void)
+SYSCALL_DEFINE0(getgid)
 {
 	/* Only we change this so SMP safe */
 	return current_gid();
 }
 
-asmlinkage long sys_getegid(void)
+SYSCALL_DEFINE0(getegid)
 {
 	/* Only we change this so SMP safe */
 	return  current_egid();
@@ -1308,7 +1308,7 @@
 EXPORT_SYMBOL(schedule_timeout_uninterruptible);
 
 /* Thread ID - the internal kernel "pid" */
-asmlinkage long sys_gettid(void)
+SYSCALL_DEFINE0(gettid)
 {
 	return task_pid_vnr(current);
 }
@@ -1400,7 +1400,7 @@
 	return 0;
 }
 
-asmlinkage long sys_sysinfo(struct sysinfo __user *info)
+SYSCALL_DEFINE1(sysinfo, struct sysinfo __user *, info)
 {
 	struct sysinfo val;
 
diff --git a/kernel/uid16.c b/kernel/uid16.c
index 2460c31..0314501 100644
--- a/kernel/uid16.c
+++ b/kernel/uid16.c
@@ -17,7 +17,7 @@
 
 #include <asm/uaccess.h>
 
-asmlinkage long sys_chown16(const char __user * filename, old_uid_t user, old_gid_t group)
+SYSCALL_DEFINE3(chown16, const char __user *, filename, old_uid_t, user, old_gid_t, group)
 {
 	long ret = sys_chown(filename, low2highuid(user), low2highgid(group));
 	/* avoid REGPARM breakage on x86: */
@@ -25,7 +25,7 @@
 	return ret;
 }
 
-asmlinkage long sys_lchown16(const char __user * filename, old_uid_t user, old_gid_t group)
+SYSCALL_DEFINE3(lchown16, const char __user *, filename, old_uid_t, user, old_gid_t, group)
 {
 	long ret = sys_lchown(filename, low2highuid(user), low2highgid(group));
 	/* avoid REGPARM breakage on x86: */
@@ -33,7 +33,7 @@
 	return ret;
 }
 
-asmlinkage long sys_fchown16(unsigned int fd, old_uid_t user, old_gid_t group)
+SYSCALL_DEFINE3(fchown16, unsigned int, fd, old_uid_t, user, old_gid_t, group)
 {
 	long ret = sys_fchown(fd, low2highuid(user), low2highgid(group));
 	/* avoid REGPARM breakage on x86: */
@@ -41,7 +41,7 @@
 	return ret;
 }
 
-asmlinkage long sys_setregid16(old_gid_t rgid, old_gid_t egid)
+SYSCALL_DEFINE2(setregid16, old_gid_t, rgid, old_gid_t, egid)
 {
 	long ret = sys_setregid(low2highgid(rgid), low2highgid(egid));
 	/* avoid REGPARM breakage on x86: */
@@ -49,7 +49,7 @@
 	return ret;
 }
 
-asmlinkage long sys_setgid16(old_gid_t gid)
+SYSCALL_DEFINE1(setgid16, old_gid_t, gid)
 {
 	long ret = sys_setgid(low2highgid(gid));
 	/* avoid REGPARM breakage on x86: */
@@ -57,7 +57,7 @@
 	return ret;
 }
 
-asmlinkage long sys_setreuid16(old_uid_t ruid, old_uid_t euid)
+SYSCALL_DEFINE2(setreuid16, old_uid_t, ruid, old_uid_t, euid)
 {
 	long ret = sys_setreuid(low2highuid(ruid), low2highuid(euid));
 	/* avoid REGPARM breakage on x86: */
@@ -65,7 +65,7 @@
 	return ret;
 }
 
-asmlinkage long sys_setuid16(old_uid_t uid)
+SYSCALL_DEFINE1(setuid16, old_uid_t, uid)
 {
 	long ret = sys_setuid(low2highuid(uid));
 	/* avoid REGPARM breakage on x86: */
@@ -73,7 +73,7 @@
 	return ret;
 }
 
-asmlinkage long sys_setresuid16(old_uid_t ruid, old_uid_t euid, old_uid_t suid)
+SYSCALL_DEFINE3(setresuid16, old_uid_t, ruid, old_uid_t, euid, old_uid_t, suid)
 {
 	long ret = sys_setresuid(low2highuid(ruid), low2highuid(euid),
 				 low2highuid(suid));
@@ -82,7 +82,7 @@
 	return ret;
 }
 
-asmlinkage long sys_getresuid16(old_uid_t __user *ruid, old_uid_t __user *euid, old_uid_t __user *suid)
+SYSCALL_DEFINE3(getresuid16, old_uid_t __user *, ruid, old_uid_t __user *, euid, old_uid_t __user *, suid)
 {
 	const struct cred *cred = current_cred();
 	int retval;
@@ -94,7 +94,7 @@
 	return retval;
 }
 
-asmlinkage long sys_setresgid16(old_gid_t rgid, old_gid_t egid, old_gid_t sgid)
+SYSCALL_DEFINE3(setresgid16, old_gid_t, rgid, old_gid_t, egid, old_gid_t, sgid)
 {
 	long ret = sys_setresgid(low2highgid(rgid), low2highgid(egid),
 				 low2highgid(sgid));
@@ -103,7 +103,8 @@
 	return ret;
 }
 
-asmlinkage long sys_getresgid16(old_gid_t __user *rgid, old_gid_t __user *egid, old_gid_t __user *sgid)
+
+SYSCALL_DEFINE3(getresgid16, old_gid_t __user *, rgid, old_gid_t __user *, egid, old_gid_t __user *, sgid)
 {
 	const struct cred *cred = current_cred();
 	int retval;
@@ -115,7 +116,7 @@
 	return retval;
 }
 
-asmlinkage long sys_setfsuid16(old_uid_t uid)
+SYSCALL_DEFINE1(setfsuid16, old_uid_t, uid)
 {
 	long ret = sys_setfsuid(low2highuid(uid));
 	/* avoid REGPARM breakage on x86: */
@@ -123,7 +124,7 @@
 	return ret;
 }
 
-asmlinkage long sys_setfsgid16(old_gid_t gid)
+SYSCALL_DEFINE1(setfsgid16, old_gid_t, gid)
 {
 	long ret = sys_setfsgid(low2highgid(gid));
 	/* avoid REGPARM breakage on x86: */
@@ -161,7 +162,7 @@
 	return 0;
 }
 
-asmlinkage long sys_getgroups16(int gidsetsize, old_gid_t __user *grouplist)
+SYSCALL_DEFINE2(getgroups16, int, gidsetsize, old_gid_t __user *, grouplist)
 {
 	const struct cred *cred = current_cred();
 	int i;
@@ -184,7 +185,7 @@
 	return i;
 }
 
-asmlinkage long sys_setgroups16(int gidsetsize, old_gid_t __user *grouplist)
+SYSCALL_DEFINE2(setgroups16, int, gidsetsize, old_gid_t __user *, grouplist)
 {
 	struct group_info *group_info;
 	int retval;
@@ -209,22 +210,22 @@
 	return retval;
 }
 
-asmlinkage long sys_getuid16(void)
+SYSCALL_DEFINE0(getuid16)
 {
 	return high2lowuid(current_uid());
 }
 
-asmlinkage long sys_geteuid16(void)
+SYSCALL_DEFINE0(geteuid16)
 {
 	return high2lowuid(current_euid());
 }
 
-asmlinkage long sys_getgid16(void)
+SYSCALL_DEFINE0(getgid16)
 {
 	return high2lowgid(current_gid());
 }
 
-asmlinkage long sys_getegid16(void)
+SYSCALL_DEFINE0(getegid16)
 {
 	return high2lowgid(current_egid());
 }
diff --git a/kernel/up.c b/kernel/up.c
index c04b9dc..1ff27a2 100644
--- a/kernel/up.c
+++ b/kernel/up.c
@@ -2,6 +2,7 @@
  * Uniprocessor-only support functions.  The counterpart to kernel/smp.c
  */
 
+#include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/smp.h>
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 2f44583..1f0c509 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -971,6 +971,8 @@
 }
 
 #ifdef CONFIG_SMP
+static struct workqueue_struct *work_on_cpu_wq __read_mostly;
+
 struct work_for_cpu {
 	struct work_struct work;
 	long (*fn)(void *);
@@ -991,8 +993,8 @@
  * @fn: the function to run
  * @arg: the function arg
  *
- * This will return -EINVAL in the cpu is not online, or the return value
- * of @fn otherwise.
+ * This will return the value @fn returns.
+ * It is up to the caller to ensure that the cpu doesn't go offline.
  */
 long work_on_cpu(unsigned int cpu, long (*fn)(void *), void *arg)
 {
@@ -1001,14 +1003,8 @@
 	INIT_WORK(&wfc.work, do_work_for_cpu);
 	wfc.fn = fn;
 	wfc.arg = arg;
-	get_online_cpus();
-	if (unlikely(!cpu_online(cpu)))
-		wfc.ret = -EINVAL;
-	else {
-		schedule_work_on(cpu, &wfc.work);
-		flush_work(&wfc.work);
-	}
-	put_online_cpus();
+	queue_work_on(cpu, work_on_cpu_wq, &wfc.work);
+	flush_work(&wfc.work);
 
 	return wfc.ret;
 }
@@ -1025,4 +1021,8 @@
 	hotcpu_notifier(workqueue_cpu_callback, 0);
 	keventd_wq = create_workqueue("events");
 	BUG_ON(!keventd_wq);
+#ifdef CONFIG_SMP
+	work_on_cpu_wq = create_workqueue("work_on_cpu");
+	BUG_ON(!work_on_cpu_wq);
+#endif
 }
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 4c9ae60..29044f5 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -570,6 +570,15 @@
 	  This is a relatively cheap check but if you care about maximum
 	  performance, say N.
 
+#
+# Select this config option from the architecture Kconfig, if it
+# it is preferred to always offer frame pointers as a config
+# option on the architecture (regardless of KERNEL_DEBUG):
+#
+config ARCH_WANT_FRAME_POINTERS
+	bool
+	help
+
 config FRAME_POINTER
 	bool "Compile the kernel with frame pointers"
 	depends on DEBUG_KERNEL && \
@@ -633,19 +642,6 @@
 
 config RCU_CPU_STALL_DETECTOR
 	bool "Check for stalled CPUs delaying RCU grace periods"
-	depends on CLASSIC_RCU
-	default n
-	help
-	  This option causes RCU to printk information on which
-	  CPUs are delaying the current grace period, but only when
-	  the grace period extends for excessive time periods.
-
-	  Say Y if you want RCU to perform such checks.
-
-	  Say N if you are unsure.
-
-config RCU_CPU_STALL_DETECTOR
-	bool "Check for stalled CPUs delaying RCU grace periods"
 	depends on CLASSIC_RCU || TREE_RCU
 	default n
 	help
diff --git a/lib/idr.c b/lib/idr.c
index 1c4f928..c11c576 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -121,7 +121,7 @@
 {
 	while (idp->id_free_cnt < IDR_FREE_MAX) {
 		struct idr_layer *new;
-		new = kmem_cache_alloc(idr_layer_cache, gfp_mask);
+		new = kmem_cache_zalloc(idr_layer_cache, gfp_mask);
 		if (new == NULL)
 			return (0);
 		move_to_free_list(idp, new);
@@ -292,7 +292,7 @@
  * and go back to the idr_pre_get() call.  If the idr is full, it will
  * return -ENOSPC.
  *
- * @id returns a value in the range 0 ... 0x7fffffff
+ * @id returns a value in the range @starting_id ... 0x7fffffff
  */
 int idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id)
 {
@@ -623,16 +623,10 @@
 }
 EXPORT_SYMBOL(idr_replace);
 
-static void idr_cache_ctor(void *idr_layer)
-{
-	memset(idr_layer, 0, sizeof(struct idr_layer));
-}
-
 void __init idr_init_cache(void)
 {
 	idr_layer_cache = kmem_cache_create("idr_layer_cache",
-				sizeof(struct idr_layer), 0, SLAB_PANIC,
-				idr_cache_ctor);
+				sizeof(struct idr_layer), 0, SLAB_PANIC, NULL);
 }
 
 /**
@@ -723,7 +717,7 @@
  * and go back to the ida_pre_get() call.  If the ida is full, it will
  * return -ENOSPC.
  *
- * @p_id returns a value in the range 0 ... 0x7fffffff.
+ * @p_id returns a value in the range @starting_id ... 0x7fffffff.
  */
 int ida_get_new_above(struct ida *ida, int starting_id, int *p_id)
 {
diff --git a/mm/fadvise.c b/mm/fadvise.c
index a1da969..54a0f80 100644
--- a/mm/fadvise.c
+++ b/mm/fadvise.c
@@ -24,7 +24,7 @@
  * POSIX_FADV_WILLNEED could set PG_Referenced, and POSIX_FADV_NOREUSE could
  * deactivate the pages and clear PG_Referenced.
  */
-asmlinkage long sys_fadvise64_64(int fd, loff_t offset, loff_t len, int advice)
+SYSCALL_DEFINE(fadvise64_64)(int fd, loff_t offset, loff_t len, int advice)
 {
 	struct file *file = fget(fd);
 	struct address_space *mapping;
@@ -126,12 +126,26 @@
 	fput(file);
 	return ret;
 }
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_fadvise64_64(long fd, loff_t offset, loff_t len, long advice)
+{
+	return SYSC_fadvise64_64((int) fd, offset, len, (int) advice);
+}
+SYSCALL_ALIAS(sys_fadvise64_64, SyS_fadvise64_64);
+#endif
 
 #ifdef __ARCH_WANT_SYS_FADVISE64
 
-asmlinkage long sys_fadvise64(int fd, loff_t offset, size_t len, int advice)
+SYSCALL_DEFINE(fadvise64)(int fd, loff_t offset, size_t len, int advice)
 {
 	return sys_fadvise64_64(fd, offset, len, advice);
 }
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_fadvise64(long fd, loff_t offset, long len, long advice)
+{
+	return SYSC_fadvise64((int) fd, offset, (size_t)len, (int)advice);
+}
+SYSCALL_ALIAS(sys_fadvise64, SyS_fadvise64);
+#endif
 
 #endif
diff --git a/mm/filemap.c b/mm/filemap.c
index ceba0bd..23acefe 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -1374,7 +1374,7 @@
 	return 0;
 }
 
-asmlinkage ssize_t sys_readahead(int fd, loff_t offset, size_t count)
+SYSCALL_DEFINE(readahead)(int fd, loff_t offset, size_t count)
 {
 	ssize_t ret;
 	struct file *file;
@@ -1393,6 +1393,13 @@
 	}
 	return ret;
 }
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_readahead(long fd, loff_t offset, long count)
+{
+	return SYSC_readahead((int) fd, offset, (size_t) count);
+}
+SYSCALL_ALIAS(sys_readahead, SyS_readahead);
+#endif
 
 #ifdef CONFIG_MMU
 /**
diff --git a/mm/fremap.c b/mm/fremap.c
index 62d5bbd..736ba7f 100644
--- a/mm/fremap.c
+++ b/mm/fremap.c
@@ -120,8 +120,8 @@
  * and the vma's default protection is used. Arbitrary protections
  * might be implemented in the future.
  */
-asmlinkage long sys_remap_file_pages(unsigned long start, unsigned long size,
-	unsigned long prot, unsigned long pgoff, unsigned long flags)
+SYSCALL_DEFINE5(remap_file_pages, unsigned long, start, unsigned long, size,
+		unsigned long, prot, unsigned long, pgoff, unsigned long, flags)
 {
 	struct mm_struct *mm = current->mm;
 	struct address_space *mapping;
diff --git a/mm/madvise.c b/mm/madvise.c
index f9349c18..b9ce574 100644
--- a/mm/madvise.c
+++ b/mm/madvise.c
@@ -281,7 +281,7 @@
  *  -EBADF  - map exists, but area maps something that isn't a file.
  *  -EAGAIN - a kernel resource was temporarily unavailable.
  */
-asmlinkage long sys_madvise(unsigned long start, size_t len_in, int behavior)
+SYSCALL_DEFINE3(madvise, unsigned long, start, size_t, len_in, int, behavior)
 {
 	unsigned long end, tmp;
 	struct vm_area_struct * vma, *prev;
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index e2996b8..4d0ea3c 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -358,6 +358,10 @@
 		return;
 
 	pc = lookup_page_cgroup(page);
+	/*
+	 * Used bit is set without atomic ops but after smp_wmb().
+	 * For making pc->mem_cgroup visible, insert smp_rmb() here.
+	 */
 	smp_rmb();
 	/* unused page is not rotated. */
 	if (!PageCgroupUsed(pc))
@@ -374,7 +378,10 @@
 	if (mem_cgroup_disabled())
 		return;
 	pc = lookup_page_cgroup(page);
-	/* barrier to sync with "charge" */
+	/*
+	 * Used bit is set without atomic ops but after smp_wmb().
+	 * For making pc->mem_cgroup visible, insert smp_rmb() here.
+	 */
 	smp_rmb();
 	if (!PageCgroupUsed(pc))
 		return;
@@ -559,6 +566,14 @@
 		return NULL;
 
 	pc = lookup_page_cgroup(page);
+	/*
+	 * Used bit is set without atomic ops but after smp_wmb().
+	 * For making pc->mem_cgroup visible, insert smp_rmb() here.
+	 */
+	smp_rmb();
+	if (!PageCgroupUsed(pc))
+		return NULL;
+
 	mz = page_cgroup_zoneinfo(pc);
 	if (!mz)
 		return NULL;
@@ -618,7 +633,7 @@
  * called with hierarchy_mutex held
  */
 static struct mem_cgroup *
-mem_cgroup_get_next_node(struct mem_cgroup *curr, struct mem_cgroup *root_mem)
+__mem_cgroup_get_next_node(struct mem_cgroup *curr, struct mem_cgroup *root_mem)
 {
 	struct cgroup *cgroup, *curr_cgroup, *root_cgroup;
 
@@ -629,19 +644,16 @@
 		/*
 		 * Walk down to children
 		 */
-		mem_cgroup_put(curr);
 		cgroup = list_entry(curr_cgroup->children.next,
 						struct cgroup, sibling);
 		curr = mem_cgroup_from_cont(cgroup);
-		mem_cgroup_get(curr);
 		goto done;
 	}
 
 visit_parent:
 	if (curr_cgroup == root_cgroup) {
-		mem_cgroup_put(curr);
-		curr = root_mem;
-		mem_cgroup_get(curr);
+		/* caller handles NULL case */
+		curr = NULL;
 		goto done;
 	}
 
@@ -649,11 +661,9 @@
 	 * Goto next sibling
 	 */
 	if (curr_cgroup->sibling.next != &curr_cgroup->parent->children) {
-		mem_cgroup_put(curr);
 		cgroup = list_entry(curr_cgroup->sibling.next, struct cgroup,
 						sibling);
 		curr = mem_cgroup_from_cont(cgroup);
-		mem_cgroup_get(curr);
 		goto done;
 	}
 
@@ -664,7 +674,6 @@
 	goto visit_parent;
 
 done:
-	root_mem->last_scanned_child = curr;
 	return curr;
 }
 
@@ -674,40 +683,46 @@
  * that to reclaim free pages from.
  */
 static struct mem_cgroup *
-mem_cgroup_get_first_node(struct mem_cgroup *root_mem)
+mem_cgroup_get_next_node(struct mem_cgroup *root_mem)
 {
 	struct cgroup *cgroup;
-	struct mem_cgroup *ret;
+	struct mem_cgroup *orig, *next;
 	bool obsolete;
 
-	obsolete = mem_cgroup_is_obsolete(root_mem->last_scanned_child);
-
 	/*
 	 * Scan all children under the mem_cgroup mem
 	 */
 	mutex_lock(&mem_cgroup_subsys.hierarchy_mutex);
+
+	orig = root_mem->last_scanned_child;
+	obsolete = mem_cgroup_is_obsolete(orig);
+
 	if (list_empty(&root_mem->css.cgroup->children)) {
-		ret = root_mem;
+		/*
+		 * root_mem might have children before and last_scanned_child
+		 * may point to one of them. We put it later.
+		 */
+		if (orig)
+			VM_BUG_ON(!obsolete);
+		next = NULL;
 		goto done;
 	}
 
-	if (!root_mem->last_scanned_child || obsolete) {
-
-		if (obsolete && root_mem->last_scanned_child)
-			mem_cgroup_put(root_mem->last_scanned_child);
-
+	if (!orig || obsolete) {
 		cgroup = list_first_entry(&root_mem->css.cgroup->children,
 				struct cgroup, sibling);
-		ret = mem_cgroup_from_cont(cgroup);
-		mem_cgroup_get(ret);
+		next = mem_cgroup_from_cont(cgroup);
 	} else
-		ret = mem_cgroup_get_next_node(root_mem->last_scanned_child,
-						root_mem);
+		next = __mem_cgroup_get_next_node(orig, root_mem);
 
 done:
-	root_mem->last_scanned_child = ret;
+	if (next)
+		mem_cgroup_get(next);
+	root_mem->last_scanned_child = next;
+	if (orig)
+		mem_cgroup_put(orig);
 	mutex_unlock(&mem_cgroup_subsys.hierarchy_mutex);
-	return ret;
+	return (next) ? next : root_mem;
 }
 
 static bool mem_cgroup_check_under_limit(struct mem_cgroup *mem)
@@ -758,28 +773,25 @@
 	 * but there might be left over accounting, even after children
 	 * have left.
 	 */
-	ret = try_to_free_mem_cgroup_pages(root_mem, gfp_mask, noswap,
+	ret += try_to_free_mem_cgroup_pages(root_mem, gfp_mask, noswap,
 					   get_swappiness(root_mem));
 	if (mem_cgroup_check_under_limit(root_mem))
-		return 0;
+		return 1;	/* indicate reclaim has succeeded */
 	if (!root_mem->use_hierarchy)
 		return ret;
 
-	next_mem = mem_cgroup_get_first_node(root_mem);
+	next_mem = mem_cgroup_get_next_node(root_mem);
 
 	while (next_mem != root_mem) {
 		if (mem_cgroup_is_obsolete(next_mem)) {
-			mem_cgroup_put(next_mem);
-			next_mem = mem_cgroup_get_first_node(root_mem);
+			next_mem = mem_cgroup_get_next_node(root_mem);
 			continue;
 		}
-		ret = try_to_free_mem_cgroup_pages(next_mem, gfp_mask, noswap,
+		ret += try_to_free_mem_cgroup_pages(next_mem, gfp_mask, noswap,
 						   get_swappiness(next_mem));
 		if (mem_cgroup_check_under_limit(root_mem))
-			return 0;
-		mutex_lock(&mem_cgroup_subsys.hierarchy_mutex);
-		next_mem = mem_cgroup_get_next_node(next_mem, root_mem);
-		mutex_unlock(&mem_cgroup_subsys.hierarchy_mutex);
+			return 1;	/* indicate reclaim has succeeded */
+		next_mem = mem_cgroup_get_next_node(root_mem);
 	}
 	return ret;
 }
@@ -863,6 +875,8 @@
 
 		ret = mem_cgroup_hierarchical_reclaim(mem_over_limit, gfp_mask,
 							noswap);
+		if (ret)
+			continue;
 
 		/*
 		 * try_to_free_mem_cgroup_pages() might not give us a full
@@ -979,14 +993,15 @@
 	if (pc->mem_cgroup != from)
 		goto out;
 
-	css_put(&from->css);
 	res_counter_uncharge(&from->res, PAGE_SIZE);
 	mem_cgroup_charge_statistics(from, pc, false);
 	if (do_swap_account)
 		res_counter_uncharge(&from->memsw, PAGE_SIZE);
+	css_put(&from->css);
+
+	css_get(&to->css);
 	pc->mem_cgroup = to;
 	mem_cgroup_charge_statistics(to, pc, true);
-	css_get(&to->css);
 	ret = 0;
 out:
 	unlock_page_cgroup(pc);
@@ -1019,8 +1034,10 @@
 	if (ret || !parent)
 		return ret;
 
-	if (!get_page_unless_zero(page))
-		return -EBUSY;
+	if (!get_page_unless_zero(page)) {
+		ret = -EBUSY;
+		goto uncharge;
+	}
 
 	ret = isolate_lru_page(page);
 
@@ -1029,19 +1046,23 @@
 
 	ret = mem_cgroup_move_account(pc, child, parent);
 
-	/* drop extra refcnt by try_charge() (move_account increment one) */
-	css_put(&parent->css);
 	putback_lru_page(page);
 	if (!ret) {
 		put_page(page);
+		/* drop extra refcnt by try_charge() */
+		css_put(&parent->css);
 		return 0;
 	}
-	/* uncharge if move fails */
+
 cancel:
+	put_page(page);
+uncharge:
+	/* drop extra refcnt by try_charge() */
+	css_put(&parent->css);
+	/* uncharge if move fails */
 	res_counter_uncharge(&parent->res, PAGE_SIZE);
 	if (do_swap_account)
 		res_counter_uncharge(&parent->memsw, PAGE_SIZE);
-	put_page(page);
 	return ret;
 }
 
@@ -1971,6 +1992,7 @@
 {
 	struct mem_cgroup *memcg = mem_cgroup_from_cont(cgrp);
 	struct mem_cgroup *parent;
+
 	if (val > 100)
 		return -EINVAL;
 
@@ -1978,15 +2000,22 @@
 		return -EINVAL;
 
 	parent = mem_cgroup_from_cont(cgrp->parent);
+
+	cgroup_lock();
+
 	/* If under hierarchy, only empty-root can set this value */
 	if ((parent->use_hierarchy) ||
-	    (memcg->use_hierarchy && !list_empty(&cgrp->children)))
+	    (memcg->use_hierarchy && !list_empty(&cgrp->children))) {
+		cgroup_unlock();
 		return -EINVAL;
+	}
 
 	spin_lock(&memcg->reclaim_param_lock);
 	memcg->swappiness = val;
 	spin_unlock(&memcg->reclaim_param_lock);
 
+	cgroup_unlock();
+
 	return 0;
 }
 
@@ -2181,7 +2210,7 @@
 }
 #endif
 
-static struct cgroup_subsys_state *
+static struct cgroup_subsys_state * __ref
 mem_cgroup_create(struct cgroup_subsys *ss, struct cgroup *cont)
 {
 	struct mem_cgroup *mem, *parent;
@@ -2232,7 +2261,14 @@
 static void mem_cgroup_destroy(struct cgroup_subsys *ss,
 				struct cgroup *cont)
 {
-	mem_cgroup_put(mem_cgroup_from_cont(cont));
+	struct mem_cgroup *mem = mem_cgroup_from_cont(cont);
+	struct mem_cgroup *last_scanned_child = mem->last_scanned_child;
+
+	if (last_scanned_child) {
+		VM_BUG_ON(!mem_cgroup_is_obsolete(last_scanned_child));
+		mem_cgroup_put(last_scanned_child);
+	}
+	mem_cgroup_put(mem);
 }
 
 static int mem_cgroup_populate(struct cgroup_subsys *ss,
diff --git a/mm/memory.c b/mm/memory.c
index e009ce8..22bfa7a 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1511,6 +1511,7 @@
 			unsigned long pfn)
 {
 	int ret;
+	pgprot_t pgprot = vma->vm_page_prot;
 	/*
 	 * Technically, architectures with pte_special can avoid all these
 	 * restrictions (same for remap_pfn_range).  However we would like
@@ -1525,10 +1526,10 @@
 
 	if (addr < vma->vm_start || addr >= vma->vm_end)
 		return -EFAULT;
-	if (track_pfn_vma_new(vma, vma->vm_page_prot, pfn, PAGE_SIZE))
+	if (track_pfn_vma_new(vma, &pgprot, pfn, PAGE_SIZE))
 		return -EINVAL;
 
-	ret = insert_pfn(vma, addr, pfn, vma->vm_page_prot);
+	ret = insert_pfn(vma, addr, pfn, pgprot);
 
 	if (ret)
 		untrack_pfn_vma(vma, pfn, PAGE_SIZE);
@@ -1671,9 +1672,15 @@
 
 	vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP;
 
-	err = track_pfn_vma_new(vma, prot, pfn, PAGE_ALIGN(size));
-	if (err)
+	err = track_pfn_vma_new(vma, &prot, pfn, PAGE_ALIGN(size));
+	if (err) {
+		/*
+		 * To indicate that track_pfn related cleanup is not
+		 * needed from higher level routine calling unmap_vmas
+		 */
+		vma->vm_flags &= ~(VM_IO | VM_RESERVED | VM_PFNMAP);
 		return -EINVAL;
+	}
 
 	BUG_ON(addr >= end);
 	pfn -= addr >> PAGE_SHIFT;
@@ -3165,6 +3172,15 @@
 #ifdef CONFIG_PROVE_LOCKING
 void might_fault(void)
 {
+	/*
+	 * Some code (nfs/sunrpc) uses socket ops on kernel memory while
+	 * holding the mmap_sem, this is safe because kernel memory doesn't
+	 * get paged out, therefore we'll never actually fault, and the
+	 * below annotations will generate false positives.
+	 */
+	if (segment_eq(get_fs(), KERNEL_DS))
+		return;
+
 	might_sleep();
 	/*
 	 * it would be nicer only to annotate paths which are not under
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index e412ffa..3eb4a6f 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -1068,10 +1068,9 @@
 	return copy_to_user(mask, nodes_addr(*nodes), copy) ? -EFAULT : 0;
 }
 
-asmlinkage long sys_mbind(unsigned long start, unsigned long len,
-			unsigned long mode,
-			unsigned long __user *nmask, unsigned long maxnode,
-			unsigned flags)
+SYSCALL_DEFINE6(mbind, unsigned long, start, unsigned long, len,
+		unsigned long, mode, unsigned long __user *, nmask,
+		unsigned long, maxnode, unsigned, flags)
 {
 	nodemask_t nodes;
 	int err;
@@ -1091,8 +1090,8 @@
 }
 
 /* Set the process memory policy */
-asmlinkage long sys_set_mempolicy(int mode, unsigned long __user *nmask,
-		unsigned long maxnode)
+SYSCALL_DEFINE3(set_mempolicy, int, mode, unsigned long __user *, nmask,
+		unsigned long, maxnode)
 {
 	int err;
 	nodemask_t nodes;
@@ -1110,9 +1109,9 @@
 	return do_set_mempolicy(mode, flags, &nodes);
 }
 
-asmlinkage long sys_migrate_pages(pid_t pid, unsigned long maxnode,
-		const unsigned long __user *old_nodes,
-		const unsigned long __user *new_nodes)
+SYSCALL_DEFINE4(migrate_pages, pid_t, pid, unsigned long, maxnode,
+		const unsigned long __user *, old_nodes,
+		const unsigned long __user *, new_nodes)
 {
 	const struct cred *cred = current_cred(), *tcred;
 	struct mm_struct *mm;
@@ -1185,10 +1184,9 @@
 
 
 /* Retrieve NUMA policy */
-asmlinkage long sys_get_mempolicy(int __user *policy,
-				unsigned long __user *nmask,
-				unsigned long maxnode,
-				unsigned long addr, unsigned long flags)
+SYSCALL_DEFINE5(get_mempolicy, int __user *, policy,
+		unsigned long __user *, nmask, unsigned long, maxnode,
+		unsigned long, addr, unsigned long, flags)
 {
 	int err;
 	int uninitialized_var(pval);
diff --git a/mm/migrate.c b/mm/migrate.c
index a30ea5f..2bb4e1d 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -1055,10 +1055,10 @@
  * Move a list of pages in the address space of the currently executing
  * process.
  */
-asmlinkage long sys_move_pages(pid_t pid, unsigned long nr_pages,
-			const void __user * __user *pages,
-			const int __user *nodes,
-			int __user *status, int flags)
+SYSCALL_DEFINE6(move_pages, pid_t, pid, unsigned long, nr_pages,
+		const void __user * __user *, pages,
+		const int __user *, nodes,
+		int __user *, status, int, flags)
 {
 	const struct cred *cred = current_cred(), *tcred;
 	struct task_struct *task;
diff --git a/mm/mincore.c b/mm/mincore.c
index 5178800..8cb508f 100644
--- a/mm/mincore.c
+++ b/mm/mincore.c
@@ -177,8 +177,8 @@
  *		mapped
  *  -EAGAIN - A kernel resource was temporarily unavailable.
  */
-asmlinkage long sys_mincore(unsigned long start, size_t len,
-	unsigned char __user * vec)
+SYSCALL_DEFINE3(mincore, unsigned long, start, size_t, len,
+		unsigned char __user *, vec)
 {
 	long retval;
 	unsigned long pages;
diff --git a/mm/mlock.c b/mm/mlock.c
index e125156..2904a34 100644
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -530,7 +530,7 @@
 	return error;
 }
 
-asmlinkage long sys_mlock(unsigned long start, size_t len)
+SYSCALL_DEFINE2(mlock, unsigned long, start, size_t, len)
 {
 	unsigned long locked;
 	unsigned long lock_limit;
@@ -558,7 +558,7 @@
 	return error;
 }
 
-asmlinkage long sys_munlock(unsigned long start, size_t len)
+SYSCALL_DEFINE2(munlock, unsigned long, start, size_t, len)
 {
 	int ret;
 
@@ -595,7 +595,7 @@
 	return 0;
 }
 
-asmlinkage long sys_mlockall(int flags)
+SYSCALL_DEFINE1(mlockall, int, flags)
 {
 	unsigned long lock_limit;
 	int ret = -EINVAL;
@@ -623,7 +623,7 @@
 	return ret;
 }
 
-asmlinkage long sys_munlockall(void)
+SYSCALL_DEFINE0(munlockall)
 {
 	int ret;
 
diff --git a/mm/mmap.c b/mm/mmap.c
index 74962319..8d95902 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -245,7 +245,7 @@
 	return next;
 }
 
-asmlinkage unsigned long sys_brk(unsigned long brk)
+SYSCALL_DEFINE1(brk, unsigned long, brk)
 {
 	unsigned long rlim, retval;
 	unsigned long newbrk, oldbrk;
@@ -1948,7 +1948,7 @@
 
 EXPORT_SYMBOL(do_munmap);
 
-asmlinkage long sys_munmap(unsigned long addr, size_t len)
+SYSCALL_DEFINE2(munmap, unsigned long, addr, size_t, len)
 {
 	int ret;
 	struct mm_struct *mm = current->mm;
diff --git a/mm/mprotect.c b/mm/mprotect.c
index d0f6e7c..abe2694 100644
--- a/mm/mprotect.c
+++ b/mm/mprotect.c
@@ -217,8 +217,8 @@
 	return error;
 }
 
-asmlinkage long
-sys_mprotect(unsigned long start, size_t len, unsigned long prot)
+SYSCALL_DEFINE3(mprotect, unsigned long, start, size_t, len,
+		unsigned long, prot)
 {
 	unsigned long vm_flags, nstart, end, tmp, reqprot;
 	struct vm_area_struct *vma, *prev;
diff --git a/mm/mremap.c b/mm/mremap.c
index 646de95..a39b7b9 100644
--- a/mm/mremap.c
+++ b/mm/mremap.c
@@ -420,9 +420,9 @@
 	return ret;
 }
 
-asmlinkage unsigned long sys_mremap(unsigned long addr,
-	unsigned long old_len, unsigned long new_len,
-	unsigned long flags, unsigned long new_addr)
+SYSCALL_DEFINE5(mremap, unsigned long, addr, unsigned long, old_len,
+		unsigned long, new_len, unsigned long, flags,
+		unsigned long, new_addr)
 {
 	unsigned long ret;
 
diff --git a/mm/msync.c b/mm/msync.c
index 07dae08..4083209 100644
--- a/mm/msync.c
+++ b/mm/msync.c
@@ -28,7 +28,7 @@
  * So by _not_ starting I/O in MS_ASYNC we provide complete flexibility to
  * applications.
  */
-asmlinkage long sys_msync(unsigned long start, size_t len, int flags)
+SYSCALL_DEFINE3(msync, unsigned long, start, size_t, len, int, flags)
 {
 	unsigned long end;
 	struct mm_struct *mm = current->mm;
diff --git a/mm/nommu.c b/mm/nommu.c
index 60ed837..2fcf47d 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -10,7 +10,7 @@
  *  Copyright (c) 2000-2003 David McCullough <davidm@snapgear.com>
  *  Copyright (c) 2000-2001 D Jeff Dionne <jeff@uClinux.org>
  *  Copyright (c) 2002      Greg Ungerer <gerg@snapgear.com>
- *  Copyright (c) 2007-2008 Paul Mundt <lethal@linux-sh.org>
+ *  Copyright (c) 2007-2009 Paul Mundt <lethal@linux-sh.org>
  */
 
 #include <linux/module.h>
@@ -394,6 +394,24 @@
 }
 EXPORT_SYMBOL(vunmap);
 
+void *vm_map_ram(struct page **pages, unsigned int count, int node, pgprot_t prot)
+{
+	BUG();
+	return NULL;
+}
+EXPORT_SYMBOL(vm_map_ram);
+
+void vm_unmap_ram(const void *mem, unsigned int count)
+{
+	BUG();
+}
+EXPORT_SYMBOL(vm_unmap_ram);
+
+void vm_unmap_aliases(void)
+{
+}
+EXPORT_SYMBOL_GPL(vm_unmap_aliases);
+
 /*
  * Implement a stub for vmalloc_sync_all() if the architecture chose not to
  * have one.
@@ -416,7 +434,7 @@
  *  to a regular file.  in this case, the unmapping will need
  *  to invoke file system routines that need the global lock.
  */
-asmlinkage unsigned long sys_brk(unsigned long brk)
+SYSCALL_DEFINE1(brk, unsigned long, brk)
 {
 	struct mm_struct *mm = current->mm;
 
@@ -1143,8 +1161,8 @@
 	return ret;
 
 enomem:
-	printk("Allocation of length %lu from process %d failed\n",
-	       len, current->pid);
+	printk("Allocation of length %lu from process %d (%s) failed\n",
+	       len, current->pid, current->comm);
 	show_free_areas();
 	return -ENOMEM;
 }
@@ -1573,7 +1591,7 @@
 }
 EXPORT_SYMBOL(do_munmap);
 
-asmlinkage long sys_munmap(unsigned long addr, size_t len)
+SYSCALL_DEFINE2(munmap, unsigned long, addr, size_t, len)
 {
 	int ret;
 	struct mm_struct *mm = current->mm;
@@ -1657,10 +1675,9 @@
 }
 EXPORT_SYMBOL(do_mremap);
 
-asmlinkage
-unsigned long sys_mremap(unsigned long addr,
-			 unsigned long old_len, unsigned long new_len,
-			 unsigned long flags, unsigned long new_addr)
+SYSCALL_DEFINE5(mremap, unsigned long, addr, unsigned long, old_len,
+		unsigned long, new_len, unsigned long, flags,
+		unsigned long, new_addr)
 {
 	unsigned long ret;
 
diff --git a/mm/swapfile.c b/mm/swapfile.c
index da422c4..f48b831 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -1377,7 +1377,7 @@
 	return ret;
 }
 
-asmlinkage long sys_swapoff(const char __user * specialfile)
+SYSCALL_DEFINE1(swapoff, const char __user *, specialfile)
 {
 	struct swap_info_struct * p = NULL;
 	unsigned short *swap_map;
@@ -1633,7 +1633,7 @@
  *
  * The swapon system call
  */
-asmlinkage long sys_swapon(const char __user * specialfile, int swap_flags)
+SYSCALL_DEFINE2(swapon, const char __user *, specialfile, int, swap_flags)
 {
 	struct swap_info_struct * p;
 	char *name = NULL;
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index c5db9a7..75f49d3 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -14,7 +14,6 @@
 #include <linux/highmem.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
-#include <linux/mutex.h>
 #include <linux/interrupt.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
@@ -24,6 +23,7 @@
 #include <linux/rbtree.h>
 #include <linux/radix-tree.h>
 #include <linux/rcupdate.h>
+#include <linux/bootmem.h>
 
 #include <asm/atomic.h>
 #include <asm/uaccess.h>
@@ -495,7 +495,7 @@
 static void __purge_vmap_area_lazy(unsigned long *start, unsigned long *end,
 					int sync, int force_flush)
 {
-	static DEFINE_MUTEX(purge_lock);
+	static DEFINE_SPINLOCK(purge_lock);
 	LIST_HEAD(valist);
 	struct vmap_area *va;
 	int nr = 0;
@@ -506,10 +506,10 @@
 	 * the case that isn't actually used at the moment anyway.
 	 */
 	if (!sync && !force_flush) {
-		if (!mutex_trylock(&purge_lock))
+		if (!spin_trylock(&purge_lock))
 			return;
 	} else
-		mutex_lock(&purge_lock);
+		spin_lock(&purge_lock);
 
 	rcu_read_lock();
 	list_for_each_entry_rcu(va, &vmap_area_list, list) {
@@ -541,7 +541,7 @@
 			__free_vmap_area(va);
 		spin_unlock(&vmap_area_lock);
 	}
-	mutex_unlock(&purge_lock);
+	spin_unlock(&purge_lock);
 }
 
 /*
@@ -984,6 +984,8 @@
 
 void __init vmalloc_init(void)
 {
+	struct vmap_area *va;
+	struct vm_struct *tmp;
 	int i;
 
 	for_each_possible_cpu(i) {
@@ -996,6 +998,14 @@
 		vbq->nr_dirty = 0;
 	}
 
+	/* Import existing vmlist entries. */
+	for (tmp = vmlist; tmp; tmp = tmp->next) {
+		va = alloc_bootmem(sizeof(struct vmap_area));
+		va->flags = tmp->flags | VM_VM_AREA;
+		va->va_start = (unsigned long)tmp->addr;
+		va->va_end = va->va_start + tmp->size;
+		__insert_vmap_area(va);
+	}
 	vmap_initialized = true;
 }
 
diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c
index 6c13239..e9db889 100644
--- a/net/8021q/vlan_core.c
+++ b/net/8021q/vlan_core.c
@@ -62,13 +62,13 @@
 {
 	return vlan_dev_info(dev)->real_dev;
 }
-EXPORT_SYMBOL_GPL(vlan_dev_real_dev);
+EXPORT_SYMBOL(vlan_dev_real_dev);
 
 u16 vlan_dev_vlan_id(const struct net_device *dev)
 {
 	return vlan_dev_info(dev)->vlan_id;
 }
-EXPORT_SYMBOL_GPL(vlan_dev_vlan_id);
+EXPORT_SYMBOL(vlan_dev_vlan_id);
 
 static int vlan_gro_common(struct napi_struct *napi, struct vlan_group *grp,
 			   unsigned int vlan_tci, struct sk_buff *skb)
diff --git a/net/9p/Kconfig b/net/9p/Kconfig
index 0663f99..7ed75c7 100644
--- a/net/9p/Kconfig
+++ b/net/9p/Kconfig
@@ -23,7 +23,7 @@
 	  guest partitions and a host partition.
 
 config NET_9P_RDMA
-	depends on INET && INFINIBAND && EXPERIMENTAL
+	depends on INET && INFINIBAND && INFINIBAND_ADDR_TRANS && EXPERIMENTAL
 	tristate "9P RDMA Transport (Experimental)"
 	help
 	  This builds support for an RDMA transport.
diff --git a/net/9p/client.c b/net/9p/client.c
index 821f1ec..1eb580c 100644
--- a/net/9p/client.c
+++ b/net/9p/client.c
@@ -618,7 +618,7 @@
 		return ERR_PTR(-ENOMEM);
 
 	ret = p9_idpool_get(clnt->fidpool);
-	if (fid->fid < 0) {
+	if (ret < 0) {
 		ret = -ENOSPC;
 		goto error;
 	}
diff --git a/net/Kconfig b/net/Kconfig
index bf27760..cdb8fde 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -24,14 +24,6 @@
 
 menu "Networking options"
 
-config NET_NS
-	bool "Network namespace support"
-	default n
-	depends on EXPERIMENTAL && NAMESPACES
-	help
-	  Allow user space to create what appear to be multiple instances
-	  of the network stack.
-
 config COMPAT_NET_DEV_OPS
        def_bool y
 
diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c
index a65e43a..cf754ac 100644
--- a/net/bridge/br_netfilter.c
+++ b/net/bridge/br_netfilter.c
@@ -58,11 +58,11 @@
 static int brnf_call_iptables __read_mostly = 1;
 static int brnf_call_ip6tables __read_mostly = 1;
 static int brnf_call_arptables __read_mostly = 1;
-static int brnf_filter_vlan_tagged __read_mostly = 1;
-static int brnf_filter_pppoe_tagged __read_mostly = 1;
+static int brnf_filter_vlan_tagged __read_mostly = 0;
+static int brnf_filter_pppoe_tagged __read_mostly = 0;
 #else
-#define brnf_filter_vlan_tagged 1
-#define brnf_filter_pppoe_tagged 1
+#define brnf_filter_vlan_tagged 0
+#define brnf_filter_pppoe_tagged 0
 #endif
 
 static inline __be16 vlan_proto(const struct sk_buff *skb)
@@ -686,8 +686,11 @@
 	if (skb->protocol == htons(ETH_P_IP) || IS_VLAN_IP(skb) ||
 	    IS_PPPOE_IP(skb))
 		pf = PF_INET;
-	else
+	else if (skb->protocol == htons(ETH_P_IPV6) || IS_VLAN_IPV6(skb) ||
+		 IS_PPPOE_IPV6(skb))
 		pf = PF_INET6;
+	else
+		return NF_ACCEPT;
 
 	nf_bridge_pull_encap_header(skb);
 
@@ -828,8 +831,11 @@
 	if (skb->protocol == htons(ETH_P_IP) || IS_VLAN_IP(skb) ||
 	    IS_PPPOE_IP(skb))
 		pf = PF_INET;
-	else
+	else if (skb->protocol == htons(ETH_P_IPV6) || IS_VLAN_IPV6(skb) ||
+		 IS_PPPOE_IPV6(skb))
 		pf = PF_INET6;
+	else
+		return NF_ACCEPT;
 
 #ifdef CONFIG_NETFILTER_DEBUG
 	if (skb->dst == NULL) {
diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c
index 8a8743d..820252a 100644
--- a/net/bridge/netfilter/ebtables.c
+++ b/net/bridge/netfilter/ebtables.c
@@ -79,7 +79,7 @@
 {
 	par->match     = m->u.match;
 	par->matchinfo = m->data;
-	return m->u.match->match(skb, par);
+	return m->u.match->match(skb, par) ? EBT_MATCH : EBT_NOMATCH;
 }
 
 static inline int ebt_dev_check(char *entry, const struct net_device *device)
diff --git a/net/can/bcm.c b/net/can/bcm.c
index 1649c8a..b7c7d46 100644
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -347,16 +347,42 @@
 	struct bcm_op *op = (struct bcm_op *)data;
 	struct bcm_msg_head msg_head;
 
-	/* create notification to user */
-	msg_head.opcode  = TX_EXPIRED;
-	msg_head.flags   = op->flags;
-	msg_head.count   = op->count;
-	msg_head.ival1   = op->ival1;
-	msg_head.ival2   = op->ival2;
-	msg_head.can_id  = op->can_id;
-	msg_head.nframes = 0;
+	if (op->kt_ival1.tv64 && (op->count > 0)) {
 
-	bcm_send_to_user(op, &msg_head, NULL, 0);
+		op->count--;
+		if (!op->count && (op->flags & TX_COUNTEVT)) {
+
+			/* create notification to user */
+			msg_head.opcode  = TX_EXPIRED;
+			msg_head.flags   = op->flags;
+			msg_head.count   = op->count;
+			msg_head.ival1   = op->ival1;
+			msg_head.ival2   = op->ival2;
+			msg_head.can_id  = op->can_id;
+			msg_head.nframes = 0;
+
+			bcm_send_to_user(op, &msg_head, NULL, 0);
+		}
+	}
+
+	if (op->kt_ival1.tv64 && (op->count > 0)) {
+
+		/* send (next) frame */
+		bcm_can_tx(op);
+		hrtimer_start(&op->timer,
+			      ktime_add(ktime_get(), op->kt_ival1),
+			      HRTIMER_MODE_ABS);
+
+	} else {
+		if (op->kt_ival2.tv64) {
+
+			/* send (next) frame */
+			bcm_can_tx(op);
+			hrtimer_start(&op->timer,
+				      ktime_add(ktime_get(), op->kt_ival2),
+				      HRTIMER_MODE_ABS);
+		}
+	}
 }
 
 /*
@@ -365,33 +391,10 @@
 static enum hrtimer_restart bcm_tx_timeout_handler(struct hrtimer *hrtimer)
 {
 	struct bcm_op *op = container_of(hrtimer, struct bcm_op, timer);
-	enum hrtimer_restart ret = HRTIMER_NORESTART;
 
-	if (op->kt_ival1.tv64 && (op->count > 0)) {
+	tasklet_schedule(&op->tsklet);
 
-		op->count--;
-		if (!op->count && (op->flags & TX_COUNTEVT))
-			tasklet_schedule(&op->tsklet);
-	}
-
-	if (op->kt_ival1.tv64 && (op->count > 0)) {
-
-		/* send (next) frame */
-		bcm_can_tx(op);
-		hrtimer_forward(hrtimer, ktime_get(), op->kt_ival1);
-		ret = HRTIMER_RESTART;
-
-	} else {
-		if (op->kt_ival2.tv64) {
-
-			/* send (next) frame */
-			bcm_can_tx(op);
-			hrtimer_forward(hrtimer, ktime_get(), op->kt_ival2);
-			ret = HRTIMER_RESTART;
-		}
-	}
-
-	return ret;
+	return HRTIMER_NORESTART;
 }
 
 /*
diff --git a/net/core/dev.c b/net/core/dev.c
index b715a55..5379b0c 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1534,7 +1534,19 @@
 	skb->mac_len = skb->network_header - skb->mac_header;
 	__skb_pull(skb, skb->mac_len);
 
-	if (WARN_ON(skb->ip_summed != CHECKSUM_PARTIAL)) {
+	if (unlikely(skb->ip_summed != CHECKSUM_PARTIAL)) {
+		struct net_device *dev = skb->dev;
+		struct ethtool_drvinfo info = {};
+
+		if (dev && dev->ethtool_ops && dev->ethtool_ops->get_drvinfo)
+			dev->ethtool_ops->get_drvinfo(dev, &info);
+
+		WARN(1, "%s: caps=(0x%lx, 0x%lx) len=%d data_len=%d "
+			"ip_summed=%d",
+		     info.driver, dev ? dev->features : 0L,
+		     skb->sk ? skb->sk->sk_route_caps : 0L,
+		     skb->len, skb->data_len, skb->ip_summed);
+
 		if (skb_header_cloned(skb) &&
 		    (err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC)))
 			return ERR_PTR(err);
@@ -2392,6 +2404,9 @@
 	if (!(skb->dev->features & NETIF_F_GRO))
 		goto normal;
 
+	if (skb_is_gso(skb) || skb_shinfo(skb)->frag_list)
+		goto normal;
+
 	rcu_read_lock();
 	list_for_each_entry_rcu(ptype, head, list) {
 		struct sk_buff *p;
@@ -2488,12 +2503,6 @@
 
 void napi_reuse_skb(struct napi_struct *napi, struct sk_buff *skb)
 {
-	skb_shinfo(skb)->nr_frags = 0;
-
-	skb->len -= skb->data_len;
-	skb->truesize -= skb->data_len;
-	skb->data_len = 0;
-
 	__skb_pull(skb, skb_headlen(skb));
 	skb_reserve(skb, NET_IP_ALIGN - skb_headroom(skb));
 
@@ -2527,6 +2536,7 @@
 
 	if (!pskb_may_pull(skb, ETH_HLEN)) {
 		napi_reuse_skb(napi, skb);
+		skb = NULL;
 		goto out;
 	}
 
@@ -4434,6 +4444,45 @@
 }
 
 /**
+ *	init_dummy_netdev	- init a dummy network device for NAPI
+ *	@dev: device to init
+ *
+ *	This takes a network device structure and initialize the minimum
+ *	amount of fields so it can be used to schedule NAPI polls without
+ *	registering a full blown interface. This is to be used by drivers
+ *	that need to tie several hardware interfaces to a single NAPI
+ *	poll scheduler due to HW limitations.
+ */
+int init_dummy_netdev(struct net_device *dev)
+{
+	/* Clear everything. Note we don't initialize spinlocks
+	 * are they aren't supposed to be taken by any of the
+	 * NAPI code and this dummy netdev is supposed to be
+	 * only ever used for NAPI polls
+	 */
+	memset(dev, 0, sizeof(struct net_device));
+
+	/* make sure we BUG if trying to hit standard
+	 * register/unregister code path
+	 */
+	dev->reg_state = NETREG_DUMMY;
+
+	/* initialize the ref count */
+	atomic_set(&dev->refcnt, 1);
+
+	/* NAPI wants this */
+	INIT_LIST_HEAD(&dev->napi_list);
+
+	/* a dummy interface is started by default */
+	set_bit(__LINK_STATE_PRESENT, &dev->state);
+	set_bit(__LINK_STATE_START, &dev->state);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(init_dummy_netdev);
+
+
+/**
  *	register_netdev	- register a network device
  *	@dev: device to register
  *
diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c
index 55cffad..55151fa 100644
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -341,8 +341,8 @@
 	rv = register_pernet_operations(first_device, ops);
 	if (rv < 0)
 		ida_remove(&net_generic_ids, *id);
-	mutex_unlock(&net_mutex);
 out:
+	mutex_unlock(&net_mutex);
 	return rv;
 }
 EXPORT_SYMBOL_GPL(register_pernet_gen_subsys);
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 5110b35..2e5f2ca 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -73,17 +73,13 @@
 static void sock_pipe_buf_release(struct pipe_inode_info *pipe,
 				  struct pipe_buffer *buf)
 {
-	struct sk_buff *skb = (struct sk_buff *) buf->private;
-
-	kfree_skb(skb);
+	put_page(buf->page);
 }
 
 static void sock_pipe_buf_get(struct pipe_inode_info *pipe,
 				struct pipe_buffer *buf)
 {
-	struct sk_buff *skb = (struct sk_buff *) buf->private;
-
-	skb_get(skb);
+	get_page(buf->page);
 }
 
 static int sock_pipe_buf_steal(struct pipe_inode_info *pipe,
@@ -1334,9 +1330,19 @@
  */
 static void sock_spd_release(struct splice_pipe_desc *spd, unsigned int i)
 {
-	struct sk_buff *skb = (struct sk_buff *) spd->partial[i].private;
+	put_page(spd->pages[i]);
+}
 
-	kfree_skb(skb);
+static inline struct page *linear_to_page(struct page *page, unsigned int len,
+					  unsigned int offset)
+{
+	struct page *p = alloc_pages(GFP_KERNEL, 0);
+
+	if (!p)
+		return NULL;
+	memcpy(page_address(p) + offset, page_address(page) + offset, len);
+
+	return p;
 }
 
 /*
@@ -1344,16 +1350,23 @@
  */
 static inline int spd_fill_page(struct splice_pipe_desc *spd, struct page *page,
 				unsigned int len, unsigned int offset,
-				struct sk_buff *skb)
+				struct sk_buff *skb, int linear)
 {
 	if (unlikely(spd->nr_pages == PIPE_BUFFERS))
 		return 1;
 
+	if (linear) {
+		page = linear_to_page(page, len, offset);
+		if (!page)
+			return 1;
+	} else
+		get_page(page);
+
 	spd->pages[spd->nr_pages] = page;
 	spd->partial[spd->nr_pages].len = len;
 	spd->partial[spd->nr_pages].offset = offset;
-	spd->partial[spd->nr_pages].private = (unsigned long) skb_get(skb);
 	spd->nr_pages++;
+
 	return 0;
 }
 
@@ -1369,7 +1382,7 @@
 static inline int __splice_segment(struct page *page, unsigned int poff,
 				   unsigned int plen, unsigned int *off,
 				   unsigned int *len, struct sk_buff *skb,
-				   struct splice_pipe_desc *spd)
+				   struct splice_pipe_desc *spd, int linear)
 {
 	if (!*len)
 		return 1;
@@ -1392,7 +1405,7 @@
 		/* the linear region may spread across several pages  */
 		flen = min_t(unsigned int, flen, PAGE_SIZE - poff);
 
-		if (spd_fill_page(spd, page, flen, poff, skb))
+		if (spd_fill_page(spd, page, flen, poff, skb, linear))
 			return 1;
 
 		__segment_seek(&page, &poff, &plen, flen);
@@ -1419,7 +1432,7 @@
 	if (__splice_segment(virt_to_page(skb->data),
 			     (unsigned long) skb->data & (PAGE_SIZE - 1),
 			     skb_headlen(skb),
-			     offset, len, skb, spd))
+			     offset, len, skb, spd, 1))
 		return 1;
 
 	/*
@@ -1429,7 +1442,7 @@
 		const skb_frag_t *f = &skb_shinfo(skb)->frags[seg];
 
 		if (__splice_segment(f->page, f->page_offset, f->size,
-				     offset, len, skb, spd))
+				     offset, len, skb, spd, 0))
 			return 1;
 	}
 
@@ -1442,7 +1455,7 @@
  * the frag list, if such a thing exists. We'd probably need to recurse to
  * handle that cleanly.
  */
-int skb_splice_bits(struct sk_buff *__skb, unsigned int offset,
+int skb_splice_bits(struct sk_buff *skb, unsigned int offset,
 		    struct pipe_inode_info *pipe, unsigned int tlen,
 		    unsigned int flags)
 {
@@ -1455,16 +1468,6 @@
 		.ops = &sock_pipe_buf_ops,
 		.spd_release = sock_spd_release,
 	};
-	struct sk_buff *skb;
-
-	/*
-	 * I'd love to avoid the clone here, but tcp_read_sock()
-	 * ignores reference counts and unconditonally kills the sk_buff
-	 * on return from the actor.
-	 */
-	skb = skb_clone(__skb, GFP_KERNEL);
-	if (unlikely(!skb))
-		return -ENOMEM;
 
 	/*
 	 * __skb_splice_bits() only fails if the output has no room left,
@@ -1488,15 +1491,9 @@
 	}
 
 done:
-	/*
-	 * drop our reference to the clone, the pipe consumption will
-	 * drop the rest.
-	 */
-	kfree_skb(skb);
-
 	if (spd.nr_pages) {
+		struct sock *sk = skb->sk;
 		int ret;
-		struct sock *sk = __skb->sk;
 
 		/*
 		 * Drop the socket lock, otherwise we have reverse
@@ -2588,8 +2585,9 @@
 	struct sk_buff *nskb;
 	unsigned int headroom;
 	unsigned int hlen = p->data - skb_mac_header(p);
+	unsigned int len = skb->len;
 
-	if (hlen + p->len + skb->len >= 65536)
+	if (hlen + p->len + len >= 65536)
 		return -E2BIG;
 
 	if (skb_shinfo(p)->frag_list)
@@ -2602,6 +2600,12 @@
 		       skb_shinfo(skb)->nr_frags * sizeof(skb_frag_t));
 
 		skb_shinfo(p)->nr_frags += skb_shinfo(skb)->nr_frags;
+		skb_shinfo(skb)->nr_frags = 0;
+
+		skb->truesize -= skb->data_len;
+		skb->len -= skb->data_len;
+		skb->data_len = 0;
+
 		NAPI_GRO_CB(skb)->free = 1;
 		goto done;
 	}
@@ -2645,9 +2649,9 @@
 
 done:
 	NAPI_GRO_CB(p)->count++;
-	p->data_len += skb->len;
-	p->truesize += skb->len;
-	p->len += skb->len;
+	p->data_len += len;
+	p->truesize += len;
+	p->len += len;
 
 	NAPI_GRO_CB(skb)->same_flow = 1;
 	return 0;
diff --git a/net/ipv4/netfilter/iptable_filter.c b/net/ipv4/netfilter/iptable_filter.c
index c922431..52cb693 100644
--- a/net/ipv4/netfilter/iptable_filter.c
+++ b/net/ipv4/netfilter/iptable_filter.c
@@ -93,13 +93,8 @@
 {
 	/* root is playing with raw sockets. */
 	if (skb->len < sizeof(struct iphdr) ||
-	    ip_hdrlen(skb) < sizeof(struct iphdr)) {
-		if (net_ratelimit())
-			printk("iptable_filter: ignoring short SOCK_RAW "
-			       "packet.\n");
+	    ip_hdrlen(skb) < sizeof(struct iphdr))
 		return NF_ACCEPT;
-	}
-
 	return ipt_do_table(skb, hook, in, out,
 			    dev_net(out)->ipv4.iptable_filter);
 }
diff --git a/net/ipv4/netfilter/iptable_mangle.c b/net/ipv4/netfilter/iptable_mangle.c
index 69f2c42..3929d20 100644
--- a/net/ipv4/netfilter/iptable_mangle.c
+++ b/net/ipv4/netfilter/iptable_mangle.c
@@ -132,12 +132,8 @@
 
 	/* root is playing with raw sockets. */
 	if (skb->len < sizeof(struct iphdr)
-	    || ip_hdrlen(skb) < sizeof(struct iphdr)) {
-		if (net_ratelimit())
-			printk("iptable_mangle: ignoring short SOCK_RAW "
-			       "packet.\n");
+	    || ip_hdrlen(skb) < sizeof(struct iphdr))
 		return NF_ACCEPT;
-	}
 
 	/* Save things which could affect route */
 	mark = skb->mark;
diff --git a/net/ipv4/netfilter/iptable_raw.c b/net/ipv4/netfilter/iptable_raw.c
index 8faebfe..7f65d1833 100644
--- a/net/ipv4/netfilter/iptable_raw.c
+++ b/net/ipv4/netfilter/iptable_raw.c
@@ -65,12 +65,8 @@
 {
 	/* root is playing with raw sockets. */
 	if (skb->len < sizeof(struct iphdr) ||
-	    ip_hdrlen(skb) < sizeof(struct iphdr)) {
-		if (net_ratelimit())
-			printk("iptable_raw: ignoring short SOCK_RAW "
-			       "packet.\n");
+	    ip_hdrlen(skb) < sizeof(struct iphdr))
 		return NF_ACCEPT;
-	}
 	return ipt_do_table(skb, hook, in, out,
 			    dev_net(out)->ipv4.iptable_raw);
 }
diff --git a/net/ipv4/netfilter/iptable_security.c b/net/ipv4/netfilter/iptable_security.c
index 36f3be3..a52a35f 100644
--- a/net/ipv4/netfilter/iptable_security.c
+++ b/net/ipv4/netfilter/iptable_security.c
@@ -96,12 +96,8 @@
 {
 	/* Somebody is playing with raw sockets. */
 	if (skb->len < sizeof(struct iphdr)
-	    || ip_hdrlen(skb) < sizeof(struct iphdr)) {
-		if (net_ratelimit())
-			printk(KERN_INFO "iptable_security: ignoring short "
-			       "SOCK_RAW packet.\n");
+	    || ip_hdrlen(skb) < sizeof(struct iphdr))
 		return NF_ACCEPT;
-	}
 	return ipt_do_table(skb, hook, in, out,
 			    dev_net(out)->ipv4.iptable_security);
 }
diff --git a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
index b2141e1..4beb04f 100644
--- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
+++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
@@ -145,11 +145,8 @@
 {
 	/* root is playing with raw sockets. */
 	if (skb->len < sizeof(struct iphdr) ||
-	    ip_hdrlen(skb) < sizeof(struct iphdr)) {
-		if (net_ratelimit())
-			printk("ipt_hook: happy cracking.\n");
+	    ip_hdrlen(skb) < sizeof(struct iphdr))
 		return NF_ACCEPT;
-	}
 	return nf_conntrack_in(dev_net(out), PF_INET, hooknum, skb);
 }
 
diff --git a/net/ipv4/netfilter/nf_conntrack_proto_icmp.c b/net/ipv4/netfilter/nf_conntrack_proto_icmp.c
index 1fd3ef7..2a8bee2 100644
--- a/net/ipv4/netfilter/nf_conntrack_proto_icmp.c
+++ b/net/ipv4/netfilter/nf_conntrack_proto_icmp.c
@@ -20,7 +20,7 @@
 #include <net/netfilter/nf_conntrack_core.h>
 #include <net/netfilter/nf_log.h>
 
-static unsigned long nf_ct_icmp_timeout __read_mostly = 30*HZ;
+static unsigned int nf_ct_icmp_timeout __read_mostly = 30*HZ;
 
 static bool icmp_pkt_to_tuple(const struct sk_buff *skb, unsigned int dataoff,
 			      struct nf_conntrack_tuple *tuple)
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index ce572f9..0cd71b8 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -522,8 +522,12 @@
 				unsigned int offset, size_t len)
 {
 	struct tcp_splice_state *tss = rd_desc->arg.data;
+	int ret;
 
-	return skb_splice_bits(skb, offset, tss->pipe, tss->len, tss->flags);
+	ret = skb_splice_bits(skb, offset, tss->pipe, rd_desc->count, tss->flags);
+	if (ret > 0)
+		rd_desc->count -= ret;
+	return ret;
 }
 
 static int __tcp_splice_read(struct sock *sk, struct tcp_splice_state *tss)
@@ -531,6 +535,7 @@
 	/* Store TCP splice context information in read_descriptor_t. */
 	read_descriptor_t rd_desc = {
 		.arg.data = tss,
+		.count	  = tss->len,
 	};
 
 	return tcp_read_sock(sk, &rd_desc, tcp_splice_data_recv);
@@ -611,11 +616,13 @@
 		tss.len -= ret;
 		spliced += ret;
 
+		if (!timeo)
+			break;
 		release_sock(sk);
 		lock_sock(sk);
 
 		if (sk->sk_err || sk->sk_state == TCP_CLOSE ||
-		    (sk->sk_shutdown & RCV_SHUTDOWN) || !timeo ||
+		    (sk->sk_shutdown & RCV_SHUTDOWN) ||
 		    signal_pending(current))
 			break;
 	}
@@ -2382,7 +2389,7 @@
 	unsigned int seq;
 	__be32 delta;
 	unsigned int oldlen;
-	unsigned int len;
+	unsigned int mss;
 
 	if (!pskb_may_pull(skb, sizeof(*th)))
 		goto out;
@@ -2398,10 +2405,13 @@
 	oldlen = (u16)~skb->len;
 	__skb_pull(skb, thlen);
 
+	mss = skb_shinfo(skb)->gso_size;
+	if (unlikely(skb->len <= mss))
+		goto out;
+
 	if (skb_gso_ok(skb, features | NETIF_F_GSO_ROBUST)) {
 		/* Packet is from an untrusted source, reset gso_segs. */
 		int type = skb_shinfo(skb)->gso_type;
-		int mss;
 
 		if (unlikely(type &
 			     ~(SKB_GSO_TCPV4 |
@@ -2412,7 +2422,6 @@
 			     !(type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6))))
 			goto out;
 
-		mss = skb_shinfo(skb)->gso_size;
 		skb_shinfo(skb)->gso_segs = DIV_ROUND_UP(skb->len, mss);
 
 		segs = NULL;
@@ -2423,8 +2432,7 @@
 	if (IS_ERR(segs))
 		goto out;
 
-	len = skb_shinfo(skb)->gso_size;
-	delta = htonl(oldlen + (thlen + len));
+	delta = htonl(oldlen + (thlen + mss));
 
 	skb = segs;
 	th = tcp_hdr(skb);
@@ -2440,7 +2448,7 @@
 			     csum_fold(csum_partial(skb_transport_header(skb),
 						    thlen, skb->csum));
 
-		seq += len;
+		seq += mss;
 		skb = skb->next;
 		th = tcp_hdr(skb);
 
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index 94f74f5..c802bc1 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -797,6 +797,7 @@
 	unsigned int nlen;
 	int flush = 1;
 	int proto;
+	__wsum csum;
 
 	if (unlikely(!pskb_may_pull(skb, sizeof(*iph))))
 		goto out;
@@ -808,6 +809,7 @@
 
 	rcu_read_lock();
 	proto = ipv6_gso_pull_exthdrs(skb, iph->nexthdr);
+	iph = ipv6_hdr(skb);
 	IPV6_GRO_CB(skb)->proto = proto;
 	ops = rcu_dereference(inet6_protos[proto]);
 	if (!ops || !ops->gro_receive)
@@ -839,8 +841,13 @@
 
 	NAPI_GRO_CB(skb)->flush |= flush;
 
+	csum = skb->csum;
+	skb_postpull_rcsum(skb, iph, skb_network_header_len(skb));
+
 	pp = ops->gro_receive(head, skb);
 
+	skb->csum = csum;
+
 out_unlock:
 	rcu_read_unlock();
 
diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c
index 29c7c99..52ee1dc 100644
--- a/net/ipv6/ip6_fib.c
+++ b/net/ipv6/ip6_fib.c
@@ -298,6 +298,10 @@
 	struct fib6_walker_t *w = (void*)cb->args[2];
 
 	if (w) {
+		if (cb->args[4]) {
+			cb->args[4] = 0;
+			fib6_walker_unlink(w);
+		}
 		cb->args[2] = 0;
 		kfree(w);
 	}
@@ -330,15 +334,12 @@
 		read_lock_bh(&table->tb6_lock);
 		res = fib6_walk_continue(w);
 		read_unlock_bh(&table->tb6_lock);
-		if (res != 0) {
-			if (res < 0)
-				fib6_walker_unlink(w);
-			goto end;
+		if (res <= 0) {
+			fib6_walker_unlink(w);
+			cb->args[4] = 0;
 		}
-		fib6_walker_unlink(w);
-		cb->args[4] = 0;
 	}
-end:
+
 	return res;
 }
 
diff --git a/net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c b/net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c
index bd52151..c455cf4 100644
--- a/net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c
+++ b/net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c
@@ -26,7 +26,7 @@
 #include <net/netfilter/ipv6/nf_conntrack_icmpv6.h>
 #include <net/netfilter/nf_log.h>
 
-static unsigned long nf_ct_icmpv6_timeout __read_mostly = 30*HZ;
+static unsigned int nf_ct_icmpv6_timeout __read_mostly = 30*HZ;
 
 static bool icmpv6_pkt_to_tuple(const struct sk_buff *skb,
 				unsigned int dataoff,
diff --git a/net/key/af_key.c b/net/key/af_key.c
index f8bd8df..7dcbde3 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -1285,6 +1285,7 @@
 				ext_hdrs[SADB_X_EXT_NAT_T_DPORT-1];
 			natt->encap_dport = n_port->sadb_x_nat_t_port_port;
 		}
+		memset(&natt->encap_oa, 0, sizeof(natt->encap_oa));
 	}
 
 	err = xfrm_init_state(x);
diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c
index 5f510a1..c5c0c52 100644
--- a/net/mac80211/ht.c
+++ b/net/mac80211/ht.c
@@ -469,7 +469,7 @@
 	struct ieee80211_sub_if_data *sdata;
 	u16 start_seq_num;
 	u8 *state;
-	int ret;
+	int ret = 0;
 
 	if ((tid >= STA_TID_NUM) || !(hw->flags & IEEE80211_HW_AMPDU_AGGREGATION))
 		return -EINVAL;
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 5abbc3f..b907482 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -699,7 +699,8 @@
 		return 0;
 
 	/* Setting ad-hoc mode on non-IBSS channel is not supported. */
-	if (sdata->local->oper_channel->flags & IEEE80211_CHAN_NO_IBSS)
+	if (sdata->local->oper_channel->flags & IEEE80211_CHAN_NO_IBSS &&
+	    type == NL80211_IFTYPE_ADHOC)
 		return -EOPNOTSUPP;
 
 	/*
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index 929ba54..1159bdb 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -107,6 +107,7 @@
 
 	sta->flags = WLAN_STA_AUTHORIZED;
 	sta->sta.supp_rates[local->hw.conf.channel->band] = rates;
+	rate_control_rate_init(sta);
 
 	return sta;
 }
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 5ba721b..2b890af 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -620,8 +620,8 @@
 	if (use_short_slot != bss_conf->use_short_slot) {
 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
 		if (net_ratelimit()) {
-			printk(KERN_DEBUG "%s: switched to %s slot"
-			       " (BSSID=%s)\n",
+			printk(KERN_DEBUG "%s: switched to %s slot time"
+			       " (BSSID=%pM)\n",
 			       sdata->dev->name,
 			       use_short_slot ? "short" : "long",
 			       ifsta->bssid);
diff --git a/net/mac80211/rc80211_minstrel.c b/net/mac80211/rc80211_minstrel.c
index 2b3b490..3824990 100644
--- a/net/mac80211/rc80211_minstrel.c
+++ b/net/mac80211/rc80211_minstrel.c
@@ -395,13 +395,15 @@
 {
 	struct minstrel_sta_info *mi = priv_sta;
 	struct minstrel_priv *mp = priv;
-	struct minstrel_rate *mr_ctl;
+	struct ieee80211_local *local = hw_to_local(mp->hw);
+	struct ieee80211_rate *ctl_rate;
 	unsigned int i, n = 0;
 	unsigned int t_slot = 9; /* FIXME: get real slot time */
 
 	mi->lowest_rix = rate_lowest_index(sband, sta);
-	mr_ctl = &mi->r[rix_to_ndx(mi, mi->lowest_rix)];
-	mi->sp_ack_dur = mr_ctl->ack_time;
+	ctl_rate = &sband->bitrates[mi->lowest_rix];
+	mi->sp_ack_dur = ieee80211_frame_duration(local, 10, ctl_rate->bitrate,
+				!!(ctl_rate->flags & IEEE80211_RATE_ERP_G), 1);
 
 	for (i = 0; i < sband->n_bitrates; i++) {
 		struct minstrel_rate *mr = &mi->r[n];
@@ -416,7 +418,7 @@
 
 		mr->rix = i;
 		mr->bitrate = sband->bitrates[i].bitrate / 5;
-		calc_rate_durations(mi, hw_to_local(mp->hw), mr,
+		calc_rate_durations(mi, local, mr,
 				&sband->bitrates[i]);
 
 		/* calculate maximum number of retransmissions before
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index dc2606d..e49a5b9 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -195,7 +195,6 @@
  * @tx_packets: number of RX/TX MSDUs
  * @tx_bytes: number of bytes transmitted to this STA
  * @tx_fragments: number of transmitted MPDUs
- * @last_txrate: description of the last used transmit rate
  * @tid_seq: per-TID sequence numbers for sending to this STA
  * @ampdu_mlme: A-MPDU state machine state
  * @timer_to_tid: identity mapping to ID timers
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index a4af3a124..4278e54 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1307,8 +1307,10 @@
 		if (is_multicast_ether_addr(hdr->addr3))
 			memcpy(hdr->addr1, hdr->addr3, ETH_ALEN);
 		else
-			if (mesh_nexthop_lookup(skb, osdata))
-				return  0;
+			if (mesh_nexthop_lookup(skb, osdata)) {
+				dev_put(odev);
+				return 0;
+			}
 		if (memcmp(odev->dev_addr, hdr->addr4, ETH_ALEN) != 0)
 			IEEE80211_IFSTA_MESH_CTR_INC(&osdata->u.mesh,
 							    fwded_frames);
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index 7e83f74c..90ce9dd 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -469,7 +469,7 @@
 				   const struct nf_conntrack_tuple *repl,
 				   gfp_t gfp)
 {
-	struct nf_conn *ct = NULL;
+	struct nf_conn *ct;
 
 	if (unlikely(!nf_conntrack_hash_rnd_initted)) {
 		get_random_bytes(&nf_conntrack_hash_rnd, 4);
@@ -551,7 +551,7 @@
 	}
 
 	ct = nf_conntrack_alloc(net, tuple, &repl_tuple, GFP_ATOMIC);
-	if (ct == NULL || IS_ERR(ct)) {
+	if (IS_ERR(ct)) {
 		pr_debug("Can't allocate conntrack.\n");
 		return (struct nf_conntrack_tuple_hash *)ct;
 	}
diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index 00e8c27..c32a7e8 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -831,13 +831,16 @@
 	if (!parse_nat_setup) {
 #ifdef CONFIG_MODULES
 		rcu_read_unlock();
+		spin_unlock_bh(&nf_conntrack_lock);
 		nfnl_unlock();
 		if (request_module("nf-nat-ipv4") < 0) {
 			nfnl_lock();
+			spin_lock_bh(&nf_conntrack_lock);
 			rcu_read_lock();
 			return -EOPNOTSUPP;
 		}
 		nfnl_lock();
+		spin_lock_bh(&nf_conntrack_lock);
 		rcu_read_lock();
 		if (nfnetlink_parse_nat_setup_hook)
 			return -EAGAIN;
@@ -1134,7 +1137,7 @@
 	struct nf_conntrack_helper *helper;
 
 	ct = nf_conntrack_alloc(&init_net, otuple, rtuple, GFP_ATOMIC);
-	if (ct == NULL || IS_ERR(ct))
+	if (IS_ERR(ct))
 		return -ENOMEM;
 
 	if (!cda[CTA_TIMEOUT])
diff --git a/net/netfilter/x_tables.c b/net/netfilter/x_tables.c
index 89837a4..bfbf521 100644
--- a/net/netfilter/x_tables.c
+++ b/net/netfilter/x_tables.c
@@ -273,6 +273,10 @@
 				have_rev = 1;
 		}
 	}
+
+	if (af != NFPROTO_UNSPEC && !have_rev)
+		return match_revfn(NFPROTO_UNSPEC, name, revision, bestp);
+
 	return have_rev;
 }
 
@@ -289,6 +293,10 @@
 				have_rev = 1;
 		}
 	}
+
+	if (af != NFPROTO_UNSPEC && !have_rev)
+		return target_revfn(NFPROTO_UNSPEC, name, revision, bestp);
+
 	return have_rev;
 }
 
diff --git a/net/netfilter/xt_time.c b/net/netfilter/xt_time.c
index 29375ba..93acaa5 100644
--- a/net/netfilter/xt_time.c
+++ b/net/netfilter/xt_time.c
@@ -243,6 +243,17 @@
 
 static int __init time_mt_init(void)
 {
+	int minutes = sys_tz.tz_minuteswest;
+
+	if (minutes < 0) /* east of Greenwich */
+		printk(KERN_INFO KBUILD_MODNAME
+		       ": kernel timezone is +%02d%02d\n",
+		       -minutes / 60, -minutes % 60);
+	else /* west of Greenwich */
+		printk(KERN_INFO KBUILD_MODNAME
+		       ": kernel timezone is -%02d%02d\n",
+		       minutes / 60, minutes % 60);
+
 	return xt_register_match(&xt_time_mt_reg);
 }
 
diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c
index 5070643..2f0f0b0 100644
--- a/net/sched/sch_htb.c
+++ b/net/sched/sch_htb.c
@@ -661,12 +661,13 @@
  * next pending event (0 for no event in pq).
  * Note: Applied are events whose have cl->pq_key <= q->now.
  */
-static psched_time_t htb_do_events(struct htb_sched *q, int level)
+static psched_time_t htb_do_events(struct htb_sched *q, int level,
+				   unsigned long start)
 {
 	/* don't run for longer than 2 jiffies; 2 is used instead of
 	   1 to simplify things when jiffy is going to be incremented
 	   too soon */
-	unsigned long stop_at = jiffies + 2;
+	unsigned long stop_at = start + 2;
 	while (time_before(jiffies, stop_at)) {
 		struct htb_class *cl;
 		long diff;
@@ -685,8 +686,8 @@
 		if (cl->cmode != HTB_CAN_SEND)
 			htb_add_to_wait_tree(q, cl, diff);
 	}
-	/* too much load - let's continue on next jiffie */
-	return q->now + PSCHED_TICKS_PER_SEC / HZ;
+	/* too much load - let's continue on next jiffie (including above) */
+	return q->now + 2 * PSCHED_TICKS_PER_SEC / HZ;
 }
 
 /* Returns class->node+prio from id-tree where classe's id is >= id. NULL
@@ -845,6 +846,7 @@
 	struct htb_sched *q = qdisc_priv(sch);
 	int level;
 	psched_time_t next_event;
+	unsigned long start_at;
 
 	/* try to dequeue direct packets as high prio (!) to minimize cpu work */
 	skb = __skb_dequeue(&q->direct_queue);
@@ -857,6 +859,7 @@
 	if (!sch->q.qlen)
 		goto fin;
 	q->now = psched_get_time();
+	start_at = jiffies;
 
 	next_event = q->now + 5 * PSCHED_TICKS_PER_SEC;
 
@@ -866,14 +869,14 @@
 		psched_time_t event;
 
 		if (q->now >= q->near_ev_cache[level]) {
-			event = htb_do_events(q, level);
+			event = htb_do_events(q, level, start_at);
 			if (!event)
 				event = q->now + PSCHED_TICKS_PER_SEC;
 			q->near_ev_cache[level] = event;
 		} else
 			event = q->near_ev_cache[level];
 
-		if (event && next_event > event)
+		if (next_event > event)
 			next_event = event;
 
 		m = ~q->row_mask[level];
diff --git a/net/sctp/input.c b/net/sctp/input.c
index bf612d9..2e4a864 100644
--- a/net/sctp/input.c
+++ b/net/sctp/input.c
@@ -249,6 +249,19 @@
 	 */
 	sctp_bh_lock_sock(sk);
 
+	if (sk != rcvr->sk) {
+		/* Our cached sk is different from the rcvr->sk.  This is
+		 * because migrate()/accept() may have moved the association
+		 * to a new socket and released all the sockets.  So now we
+		 * are holding a lock on the old socket while the user may
+		 * be doing something with the new socket.  Switch our veiw
+		 * of the current sk.
+		 */
+		sctp_bh_unlock_sock(sk);
+		sk = rcvr->sk;
+		sctp_bh_lock_sock(sk);
+	}
+
 	if (sock_owned_by_user(sk)) {
 		SCTP_INC_STATS_BH(SCTP_MIB_IN_PKT_BACKLOG);
 		sctp_add_backlog(sk, skb);
diff --git a/net/sctp/output.c b/net/sctp/output.c
index c3f417f..7363935 100644
--- a/net/sctp/output.c
+++ b/net/sctp/output.c
@@ -324,14 +324,16 @@
 	switch (chunk->chunk_hdr->type) {
 	    case SCTP_CID_DATA:
 		retval = sctp_packet_append_data(packet, chunk);
+		if (SCTP_XMIT_OK != retval)
+			goto finish;
 		/* Disallow SACK bundling after DATA. */
 		packet->has_sack = 1;
 		/* Disallow AUTH bundling after DATA */
 		packet->has_auth = 1;
 		/* Let it be knows that packet has DATA in it */
 		packet->has_data = 1;
-		if (SCTP_XMIT_OK != retval)
-			goto finish;
+		/* timestamp the chunk for rtx purposes */
+		chunk->sent_at = jiffies;
 		break;
 	    case SCTP_CID_COOKIE_ECHO:
 		packet->has_cookie_echo = 1;
@@ -470,7 +472,6 @@
 			} else
 				chunk->resent = 1;
 
-			chunk->sent_at = jiffies;
 			has_data = 1;
 		}
 
diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c
index 247ebc9..bc411c8 100644
--- a/net/sctp/outqueue.c
+++ b/net/sctp/outqueue.c
@@ -929,7 +929,6 @@
 		}
 
 		/* Finally, transmit new packets.  */
-		start_timer = 0;
 		while ((chunk = sctp_outq_dequeue_data(q)) != NULL) {
 			/* RFC 2960 6.5 Every DATA chunk MUST carry a valid
 			 * stream identifier.
@@ -1028,7 +1027,7 @@
 			list_add_tail(&chunk->transmitted_list,
 				      &transport->transmitted);
 
-			sctp_transport_reset_timers(transport, start_timer-1);
+			sctp_transport_reset_timers(transport, 0);
 
 			q->empty = 0;
 
diff --git a/net/socket.c b/net/socket.c
index 06603d7..35dd737 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -1214,7 +1214,7 @@
 	return __sock_create(&init_net, family, type, protocol, res, 1);
 }
 
-asmlinkage long sys_socket(int family, int type, int protocol)
+SYSCALL_DEFINE3(socket, int, family, int, type, int, protocol)
 {
 	int retval;
 	struct socket *sock;
@@ -1255,8 +1255,8 @@
  *	Create a pair of connected sockets.
  */
 
-asmlinkage long sys_socketpair(int family, int type, int protocol,
-			       int __user *usockvec)
+SYSCALL_DEFINE4(socketpair, int, family, int, type, int, protocol,
+		int __user *, usockvec)
 {
 	struct socket *sock1, *sock2;
 	int fd1, fd2, err;
@@ -1356,7 +1356,7 @@
  *	the protocol layer (having also checked the address is ok).
  */
 
-asmlinkage long sys_bind(int fd, struct sockaddr __user *umyaddr, int addrlen)
+SYSCALL_DEFINE3(bind, int, fd, struct sockaddr __user *, umyaddr, int, addrlen)
 {
 	struct socket *sock;
 	struct sockaddr_storage address;
@@ -1385,7 +1385,7 @@
  *	ready for listening.
  */
 
-asmlinkage long sys_listen(int fd, int backlog)
+SYSCALL_DEFINE2(listen, int, fd, int, backlog)
 {
 	struct socket *sock;
 	int err, fput_needed;
@@ -1418,8 +1418,8 @@
  *	clean when we restucture accept also.
  */
 
-asmlinkage long sys_accept4(int fd, struct sockaddr __user *upeer_sockaddr,
-			    int __user *upeer_addrlen, int flags)
+SYSCALL_DEFINE4(accept4, int, fd, struct sockaddr __user *, upeer_sockaddr,
+		int __user *, upeer_addrlen, int, flags)
 {
 	struct socket *sock, *newsock;
 	struct file *newfile;
@@ -1502,8 +1502,8 @@
 	goto out_put;
 }
 
-asmlinkage long sys_accept(int fd, struct sockaddr __user *upeer_sockaddr,
-			   int __user *upeer_addrlen)
+SYSCALL_DEFINE3(accept, int, fd, struct sockaddr __user *, upeer_sockaddr,
+		int __user *, upeer_addrlen)
 {
 	return sys_accept4(fd, upeer_sockaddr, upeer_addrlen, 0);
 }
@@ -1520,8 +1520,8 @@
  *	include the -EINPROGRESS status for such sockets.
  */
 
-asmlinkage long sys_connect(int fd, struct sockaddr __user *uservaddr,
-			    int addrlen)
+SYSCALL_DEFINE3(connect, int, fd, struct sockaddr __user *, uservaddr,
+		int, addrlen)
 {
 	struct socket *sock;
 	struct sockaddr_storage address;
@@ -1552,8 +1552,8 @@
  *	name to user space.
  */
 
-asmlinkage long sys_getsockname(int fd, struct sockaddr __user *usockaddr,
-				int __user *usockaddr_len)
+SYSCALL_DEFINE3(getsockname, int, fd, struct sockaddr __user *, usockaddr,
+		int __user *, usockaddr_len)
 {
 	struct socket *sock;
 	struct sockaddr_storage address;
@@ -1583,8 +1583,8 @@
  *	name to user space.
  */
 
-asmlinkage long sys_getpeername(int fd, struct sockaddr __user *usockaddr,
-				int __user *usockaddr_len)
+SYSCALL_DEFINE3(getpeername, int, fd, struct sockaddr __user *, usockaddr,
+		int __user *, usockaddr_len)
 {
 	struct socket *sock;
 	struct sockaddr_storage address;
@@ -1615,9 +1615,9 @@
  *	the protocol.
  */
 
-asmlinkage long sys_sendto(int fd, void __user *buff, size_t len,
-			   unsigned flags, struct sockaddr __user *addr,
-			   int addr_len)
+SYSCALL_DEFINE6(sendto, int, fd, void __user *, buff, size_t, len,
+		unsigned, flags, struct sockaddr __user *, addr,
+		int, addr_len)
 {
 	struct socket *sock;
 	struct sockaddr_storage address;
@@ -1660,7 +1660,8 @@
  *	Send a datagram down a socket.
  */
 
-asmlinkage long sys_send(int fd, void __user *buff, size_t len, unsigned flags)
+SYSCALL_DEFINE4(send, int, fd, void __user *, buff, size_t, len,
+		unsigned, flags)
 {
 	return sys_sendto(fd, buff, len, flags, NULL, 0);
 }
@@ -1671,9 +1672,9 @@
  *	sender address from kernel to user space.
  */
 
-asmlinkage long sys_recvfrom(int fd, void __user *ubuf, size_t size,
-			     unsigned flags, struct sockaddr __user *addr,
-			     int __user *addr_len)
+SYSCALL_DEFINE6(recvfrom, int, fd, void __user *, ubuf, size_t, size,
+		unsigned, flags, struct sockaddr __user *, addr,
+		int __user *, addr_len)
 {
 	struct socket *sock;
 	struct iovec iov;
@@ -1725,8 +1726,8 @@
  *	to pass the user mode parameter for the protocols to sort out.
  */
 
-asmlinkage long sys_setsockopt(int fd, int level, int optname,
-			       char __user *optval, int optlen)
+SYSCALL_DEFINE5(setsockopt, int, fd, int, level, int, optname,
+		char __user *, optval, int, optlen)
 {
 	int err, fput_needed;
 	struct socket *sock;
@@ -1759,8 +1760,8 @@
  *	to pass a user mode parameter for the protocols to sort out.
  */
 
-asmlinkage long sys_getsockopt(int fd, int level, int optname,
-			       char __user *optval, int __user *optlen)
+SYSCALL_DEFINE5(getsockopt, int, fd, int, level, int, optname,
+		char __user *, optval, int __user *, optlen)
 {
 	int err, fput_needed;
 	struct socket *sock;
@@ -1789,7 +1790,7 @@
  *	Shutdown a socket.
  */
 
-asmlinkage long sys_shutdown(int fd, int how)
+SYSCALL_DEFINE2(shutdown, int, fd, int, how)
 {
 	int err, fput_needed;
 	struct socket *sock;
@@ -1815,7 +1816,7 @@
  *	BSD sendmsg interface
  */
 
-asmlinkage long sys_sendmsg(int fd, struct msghdr __user *msg, unsigned flags)
+SYSCALL_DEFINE3(sendmsg, int, fd, struct msghdr __user *, msg, unsigned, flags)
 {
 	struct compat_msghdr __user *msg_compat =
 	    (struct compat_msghdr __user *)msg;
@@ -1921,8 +1922,8 @@
  *	BSD recvmsg interface
  */
 
-asmlinkage long sys_recvmsg(int fd, struct msghdr __user *msg,
-			    unsigned int flags)
+SYSCALL_DEFINE3(recvmsg, int, fd, struct msghdr __user *, msg,
+		unsigned int, flags)
 {
 	struct compat_msghdr __user *msg_compat =
 	    (struct compat_msghdr __user *)msg;
@@ -2045,7 +2046,7 @@
  *  it is set by the callees.
  */
 
-asmlinkage long sys_socketcall(int call, unsigned long __user *args)
+SYSCALL_DEFINE2(socketcall, int, call, unsigned long __user *, args)
 {
 	unsigned long a[6];
 	unsigned long a0, a1;
diff --git a/net/sunrpc/Kconfig b/net/sunrpc/Kconfig
new file mode 100644
index 0000000..dcef600
--- /dev/null
+++ b/net/sunrpc/Kconfig
@@ -0,0 +1,78 @@
+config SUNRPC
+	tristate
+
+config SUNRPC_GSS
+	tristate
+
+config SUNRPC_XPRT_RDMA
+	tristate
+	depends on SUNRPC && INFINIBAND && EXPERIMENTAL
+	default SUNRPC && INFINIBAND
+	help
+	  This option allows the NFS client and server to support
+	  an RDMA-enabled transport.
+
+	  To compile RPC client RDMA transport support as a module,
+	  choose M here: the module will be called xprtrdma.
+
+	  If unsure, say N.
+
+config SUNRPC_REGISTER_V4
+	bool "Register local RPC services via rpcbind v4 (EXPERIMENTAL)"
+	depends on SUNRPC && EXPERIMENTAL
+	default n
+	help
+	  Sun added support for registering RPC services at an IPv6
+	  address by creating two new versions of the rpcbind protocol
+	  (RFC 1833).
+
+	  This option enables support in the kernel RPC server for
+	  registering kernel RPC services via version 4 of the rpcbind
+	  protocol.  If you enable this option, you must run a portmapper
+	  daemon that supports rpcbind protocol version 4.
+
+	  Serving NFS over IPv6 from knfsd (the kernel's NFS server)
+	  requires that you enable this option and use a portmapper that
+	  supports rpcbind version 4.
+
+	  If unsure, say N to get traditional behavior (register kernel
+	  RPC services using only rpcbind version 2).  Distributions
+	  using the legacy Linux portmapper daemon must say N here.
+
+config RPCSEC_GSS_KRB5
+	tristate "Secure RPC: Kerberos V mechanism (EXPERIMENTAL)"
+	depends on SUNRPC && EXPERIMENTAL
+	select SUNRPC_GSS
+	select CRYPTO
+	select CRYPTO_MD5
+	select CRYPTO_DES
+	select CRYPTO_CBC
+	help
+	  Choose Y here to enable Secure RPC using the Kerberos version 5
+	  GSS-API mechanism (RFC 1964).
+
+	  Secure RPC calls with Kerberos require an auxiliary user-space
+	  daemon which may be found in the Linux nfs-utils package
+	  available from http://linux-nfs.org/.  In addition, user-space
+	  Kerberos support should be installed.
+
+	  If unsure, say N.
+
+config RPCSEC_GSS_SPKM3
+	tristate "Secure RPC: SPKM3 mechanism (EXPERIMENTAL)"
+	depends on SUNRPC && EXPERIMENTAL
+	select SUNRPC_GSS
+	select CRYPTO
+	select CRYPTO_MD5
+	select CRYPTO_DES
+	select CRYPTO_CAST5
+	select CRYPTO_CBC
+	help
+	  Choose Y here to enable Secure RPC using the SPKM3 public key
+	  GSS-API mechansim (RFC 2025).
+
+	  Secure RPC calls with SPKM3 require an auxiliary userspace
+	  daemon which may be found in the Linux nfs-utils package
+	  available from http://linux-nfs.org/.
+
+	  If unsure, say N.
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 4f87753..bc494ce 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -421,6 +421,31 @@
 	return 0;
 }
 
+/**
+ * freq_in_rule_band - tells us if a frequency is in a frequency band
+ * @freq_range: frequency rule we want to query
+ * @freq_khz: frequency we are inquiring about
+ *
+ * This lets us know if a specific frequency rule is or is not relevant to
+ * a specific frequency's band. Bands are device specific and artificial
+ * definitions (the "2.4 GHz band" and the "5 GHz band"), however it is
+ * safe for now to assume that a frequency rule should not be part of a
+ * frequency's band if the start freq or end freq are off by more than 2 GHz.
+ * This resolution can be lowered and should be considered as we add
+ * regulatory rule support for other "bands".
+ **/
+static bool freq_in_rule_band(const struct ieee80211_freq_range *freq_range,
+	u32 freq_khz)
+{
+#define ONE_GHZ_IN_KHZ	1000000
+	if (abs(freq_khz - freq_range->start_freq_khz) <= (2 * ONE_GHZ_IN_KHZ))
+		return true;
+	if (abs(freq_khz - freq_range->end_freq_khz) <= (2 * ONE_GHZ_IN_KHZ))
+		return true;
+	return false;
+#undef ONE_GHZ_IN_KHZ
+}
+
 /* Converts a country IE to a regulatory domain. A regulatory domain
  * structure has a lot of information which the IE doesn't yet have,
  * so for the other values we use upper max values as we will intersect
@@ -538,6 +563,7 @@
 
 	/* This time around we fill in the rd */
 	while (country_ie_len >= 3) {
+		int end_channel = 0;
 		struct ieee80211_country_ie_triplet *triplet =
 			(struct ieee80211_country_ie_triplet *) country_ie;
 		struct ieee80211_reg_rule *reg_rule = NULL;
@@ -559,6 +585,23 @@
 
 		reg_rule->flags = flags;
 
+		/* 2 GHz */
+		if (triplet->chans.first_channel <= 14)
+			end_channel = triplet->chans.first_channel +
+				triplet->chans.num_channels;
+		else
+			/*
+			 * 5 GHz -- For example in country IEs if the first
+			 * channel given is 36 and the number of channels is 4
+			 * then the individual channel numbers defined for the
+			 * 5 GHz PHY by these parameters are: 36, 40, 44, and 48
+			 * and not 36, 37, 38, 39.
+			 *
+			 * See: http://tinyurl.com/11d-clarification
+			 */
+			end_channel =  triplet->chans.first_channel +
+				(4 * (triplet->chans.num_channels - 1));
+
 		/* The +10 is since the regulatory domain expects
 		 * the actual band edge, not the center of freq for
 		 * its start and end freqs, assuming 20 MHz bandwidth on
@@ -568,8 +611,7 @@
 				triplet->chans.first_channel) - 10);
 		freq_range->end_freq_khz =
 			MHZ_TO_KHZ(ieee80211_channel_to_frequency(
-				triplet->chans.first_channel +
-					triplet->chans.num_channels) + 10);
+				end_channel) + 10);
 
 		/* Large arbitrary values, we intersect later */
 		/* Increment this if we ever support >= 40 MHz channels
@@ -748,12 +790,23 @@
  * 	this value to the maximum allowed bandwidth.
  * @reg_rule: the regulatory rule which we have for this frequency
  *
- * Use this function to get the regulatory rule for a specific frequency.
+ * Use this function to get the regulatory rule for a specific frequency on
+ * a given wireless device. If the device has a specific regulatory domain
+ * it wants to follow we respect that unless a country IE has been received
+ * and processed already.
+ *
+ * Returns 0 if it was able to find a valid regulatory rule which does
+ * apply to the given center_freq otherwise it returns non-zero. It will
+ * also return -ERANGE if we determine the given center_freq does not even have
+ * a regulatory rule for a frequency range in the center_freq's band. See
+ * freq_in_rule_band() for our current definition of a band -- this is purely
+ * subjective and right now its 802.11 specific.
  */
 static int freq_reg_info(u32 center_freq, u32 *bandwidth,
 			 const struct ieee80211_reg_rule **reg_rule)
 {
 	int i;
+	bool band_rule_found = false;
 	u32 max_bandwidth = 0;
 
 	if (!cfg80211_regdomain)
@@ -767,7 +820,15 @@
 		rr = &cfg80211_regdomain->reg_rules[i];
 		fr = &rr->freq_range;
 		pr = &rr->power_rule;
+
+		/* We only need to know if one frequency rule was
+		 * was in center_freq's band, that's enough, so lets
+		 * not overwrite it once found */
+		if (!band_rule_found)
+			band_rule_found = freq_in_rule_band(fr, center_freq);
+
 		max_bandwidth = freq_max_bandwidth(fr, center_freq);
+
 		if (max_bandwidth && *bandwidth <= max_bandwidth) {
 			*reg_rule = rr;
 			*bandwidth = max_bandwidth;
@@ -775,23 +836,64 @@
 		}
 	}
 
+	if (!band_rule_found)
+		return -ERANGE;
+
 	return !max_bandwidth;
 }
 
-static void handle_channel(struct ieee80211_channel *chan)
+static void handle_channel(struct wiphy *wiphy, enum ieee80211_band band,
+			   unsigned int chan_idx)
 {
 	int r;
-	u32 flags = chan->orig_flags;
+	u32 flags;
 	u32 max_bandwidth = 0;
 	const struct ieee80211_reg_rule *reg_rule = NULL;
 	const struct ieee80211_power_rule *power_rule = NULL;
+	struct ieee80211_supported_band *sband;
+	struct ieee80211_channel *chan;
+
+	sband = wiphy->bands[band];
+	BUG_ON(chan_idx >= sband->n_channels);
+	chan = &sband->channels[chan_idx];
+
+	flags = chan->orig_flags;
 
 	r = freq_reg_info(MHZ_TO_KHZ(chan->center_freq),
 		&max_bandwidth, &reg_rule);
 
 	if (r) {
-		flags |= IEEE80211_CHAN_DISABLED;
-		chan->flags = flags;
+		/* This means no regulatory rule was found in the country IE
+		 * with a frequency range on the center_freq's band, since
+		 * IEEE-802.11 allows for a country IE to have a subset of the
+		 * regulatory information provided in a country we ignore
+		 * disabling the channel unless at least one reg rule was
+		 * found on the center_freq's band. For details see this
+		 * clarification:
+		 *
+		 * http://tinyurl.com/11d-clarification
+		 */
+		if (r == -ERANGE &&
+		    last_request->initiator == REGDOM_SET_BY_COUNTRY_IE) {
+#ifdef CONFIG_CFG80211_REG_DEBUG
+			printk(KERN_DEBUG "cfg80211: Leaving channel %d MHz "
+				"intact on %s - no rule found in band on "
+				"Country IE\n",
+				chan->center_freq, wiphy_name(wiphy));
+#endif
+		} else {
+		/* In this case we know the country IE has at least one reg rule
+		 * for the band so we respect its band definitions */
+#ifdef CONFIG_CFG80211_REG_DEBUG
+			if (last_request->initiator == REGDOM_SET_BY_COUNTRY_IE)
+				printk(KERN_DEBUG "cfg80211: Disabling "
+					"channel %d MHz on %s due to "
+					"Country IE\n",
+					chan->center_freq, wiphy_name(wiphy));
+#endif
+			flags |= IEEE80211_CHAN_DISABLED;
+			chan->flags = flags;
+		}
 		return;
 	}
 
@@ -808,12 +910,16 @@
 		chan->max_power = (int) MBM_TO_DBM(power_rule->max_eirp);
 }
 
-static void handle_band(struct ieee80211_supported_band *sband)
+static void handle_band(struct wiphy *wiphy, enum ieee80211_band band)
 {
-	int i;
+	unsigned int i;
+	struct ieee80211_supported_band *sband;
+
+	BUG_ON(!wiphy->bands[band]);
+	sband = wiphy->bands[band];
 
 	for (i = 0; i < sband->n_channels; i++)
-		handle_channel(&sband->channels[i]);
+		handle_channel(wiphy, band, i);
 }
 
 static bool ignore_reg_update(struct wiphy *wiphy, enum reg_set_by setby)
@@ -840,7 +946,7 @@
 	enum ieee80211_band band;
 	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
 		if (wiphy->bands[band])
-			handle_band(wiphy->bands[band]);
+			handle_band(wiphy, band);
 		if (wiphy->reg_notifier)
 			wiphy->reg_notifier(wiphy, setby);
 	}
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 5d90030..c7de8b3 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -151,16 +151,16 @@
 $(obj)/%.i: $(src)/%.c FORCE
 	$(call if_changed_dep,cc_i_c)
 
-cmd_genksyms =                                                              \
+cmd_gensymtypes =                                                           \
     $(CPP) -D__GENKSYMS__ $(c_flags) $< |                                   \
-    $(GENKSYMS) -T $@ -A -a $(ARCH)                                         \
+    $(GENKSYMS) -T $@ -a $(ARCH)                                            \
      $(if $(KBUILD_PRESERVE),-p)                                            \
      $(if $(1),-r $(firstword $(wildcard $(@:.symtypes=.symref) /dev/null)))
 
 quiet_cmd_cc_symtypes_c = SYM $(quiet_modtag) $@
 cmd_cc_symtypes_c =                                                         \
     set -e;                                                                 \
-    $(call cmd_genksyms, true) >/dev/null;                                  \
+    $(call cmd_gensymtypes, true) >/dev/null;                               \
     test -s $@ || rm -f $@
 
 $(obj)/%.symtypes : $(src)/%.c FORCE
@@ -177,38 +177,28 @@
 
 else
 # When module versioning is enabled the following steps are executed:
-# o compile a .tmp_<file>.s from <file>.c
-# o if .tmp_<file>.s doesn't contain a __ksymtab version, i.e. does
-#   not export symbols, we just assemble .tmp_<file>.s to <file>.o and
+# o compile a .tmp_<file>.o from <file>.c
+# o if .tmp_<file>.o doesn't contain a __ksymtab version, i.e. does
+#   not export symbols, we just rename .tmp_<file>.o to <file>.o and
 #   are done.
 # o otherwise, we calculate symbol versions using the good old
 #   genksyms on the preprocessed source and postprocess them in a way
-#   that they are usable as assembly source
-# o assemble <file>.o from .tmp_<file>.s forcing inclusion of directives
-#   defining the actual values of __crc_*, followed by objcopy-ing them
-#   to force these symbols to be local to permit stripping them later.
-s_file = $(@D)/.tmp_$(@F:.o=.s)
-v_file = $(@D)/.tmp_$(@F:.o=.v)
-tmp_o_file = $(@D)/.tmp_$(@F)
-no_g_c_flags = $(filter-out -g%,$(c_flags))
+#   that they are usable as a linker script
+# o generate <file>.o from .tmp_<file>.o using the linker to
+#   replace the unresolved symbols __crc_exported_symbol with
+#   the actual value of the checksum generated by genksyms
 
-cmd_cc_o_c = $(CC) $(c_flags) -S -o $(s_file) $<
-
+cmd_cc_o_c = $(CC) $(c_flags) -c -o $(@D)/.tmp_$(@F) $<
 cmd_modversions =							\
-	if grep -q __ksymtab $(s_file); then				\
-		if $(call cmd_genksyms, $(KBUILD_SYMTYPES)) > $(v_file) \
-		   && $(CC) $(no_g_c_flags) -c -Wa,$(v_file)		\
-			    -o $(tmp_o_file) $(s_file)			\
-		   && $(OBJCOPY) -L '__crc_*' -L '___crc_*' -w		\
-				 $(tmp_o_file) $@;			\
-		then							\
-			: ;						\
-		else							\
-			rm -f $@; exit 1;				\
-		fi;							\
+	if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then	\
+		$(call cmd_gensymtypes, $(KBUILD_SYMTYPES))		\
+		    > $(@D)/.tmp_$(@F:.o=.ver);				\
+									\
+		$(LD) $(LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F) 		\
+			-T $(@D)/.tmp_$(@F:.o=.ver);			\
+		rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver);	\
 	else								\
-		rm -f $(v_file);					\
-		$(CC) $(no_g_c_flags) -c -o $@ $(s_file);		\
+		mv -f $(@D)/.tmp_$(@F) $@;				\
 	fi;
 endif
 
@@ -225,12 +215,7 @@
 	$(cmd_record_mcount)						  \
 	scripts/basic/fixdep $(depfile) $@ '$(call make-cmd,cc_o_c)' >    \
 	                                              $(dot-target).tmp;  \
-	if [ -r $(@D)/.tmp_$(@F:.o=.v) ]; then				  \
-		echo >> $(dot-target).tmp;				  \
-		echo '$@: $(GENKSYMS)' >> $(dot-target).tmp;		  \
-		echo '$(GENKSYMS):: ;' >> $(dot-target).tmp;		  \
-	fi;								  \
-	rm -f $(depfile) $(@D)/.tmp_$(@F:.o=.?);			  \
+	rm -f $(depfile);						  \
 	mv -f $(dot-target).tmp $(dot-target).cmd
 endef
 
diff --git a/scripts/Makefile.modinst b/scripts/Makefile.modinst
index a5122dc..efa5d94 100644
--- a/scripts/Makefile.modinst
+++ b/scripts/Makefile.modinst
@@ -17,8 +17,7 @@
 	@:
 
 quiet_cmd_modules_install = INSTALL $@
-      cmd_modules_install = mkdir -p $(2); \
-			    $(mod_strip_cmd) $@ $(2)/$(notdir $@) || cp $@ $(2)
+      cmd_modules_install = mkdir -p $(2); cp $@ $(2) ; $(mod_strip_cmd) $(2)/$(notdir $@)
 
 # Modules built outside the kernel source tree go into extra by default
 INSTALL_MOD_DIR ?= extra
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 7bed4ed..45eb0ae 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -10,7 +10,7 @@
 my $P = $0;
 $P =~ s@.*/@@g;
 
-my $V = '0.26';
+my $V = '0.27';
 
 use Getopt::Long qw(:config no_auto_abbrev);
 
@@ -411,13 +411,15 @@
 
 	my $type = '';
 	my $level = 0;
-	my @stack = ([$type, $level]);
+	my @stack = ();
 	my $p;
 	my $c;
 	my $len = 0;
 
 	my $remainder;
 	while (1) {
+		@stack = (['', 0]) if ($#stack == -1);
+
 		#warn "CSB: blk<$blk> remain<$remain>\n";
 		# If we are about to drop off the end, pull in more
 		# context.
@@ -1663,7 +1665,7 @@
 			# Should not end with a space.
 			$to =~ s/\s+$//;
 			# '*'s should not have spaces between.
-			while ($to =~ s/(.)\s\*/$1\*/) {
+			while ($to =~ s/\*\s+\*/\*\*/) {
 			}
 
 			#print "from<$from> to<$to>\n";
@@ -1678,7 +1680,7 @@
 			# Should not end with a space.
 			$to =~ s/\s+$//;
 			# '*'s should not have spaces between.
-			while ($to =~ s/(.)\s\*/$1\*/) {
+			while ($to =~ s/\*\s+\*/\*\*/) {
 			}
 			# Modifiers should have spaces.
 			$to =~ s/(\b$Modifier$)/$1 /;
@@ -2014,7 +2016,11 @@
 
 			# Flatten any parentheses
 			$value =~ s/\)\(/\) \(/g;
-			while ($value !~ /(?:$Ident|-?$Constant)\s*$Compare\s*(?:$Ident|-?$Constant)/ && $value =~ s/\([^\(\)]*\)/1/) {
+			while ($value =~ s/\[[^\{\}]*\]/1/ ||
+			       $value !~ /(?:$Ident|-?$Constant)\s*
+					     $Compare\s*
+					     (?:$Ident|-?$Constant)/x &&
+			       $value =~ s/\([^\(\)]*\)/1/) {
 			}
 
 			if ($value =~ /^(?:$Ident|-?$Constant)$/) {
@@ -2102,6 +2108,11 @@
 				ERROR("trailing statements should be on next line\n" . $herecurr);
 			}
 		}
+# if should not continue a brace
+		if ($line =~ /}\s*if\b/) {
+			ERROR("trailing statements should be on next line\n" .
+				$herecurr);
+		}
 # case and default should not have general statements after them
 		if ($line =~ /^.\s*(?:case\s*.*|default\s*):/g &&
 		    $line !~ /\G(?:
@@ -2516,9 +2527,10 @@
 			WARN("please use device_initcall() instead of __initcall()\n" . $herecurr);
 		}
 # check for struct file_operations, ensure they are const.
-		if ($line =~ /\bstruct\s+file_operations\b/ &&
-		    $line !~ /\bconst\b/) {
-			WARN("struct file_operations should normally be const\n" . $herecurr);
+		if ($line !~ /\bconst\b/ &&
+		    $line =~ /\bstruct\s+(file_operations|seq_operations)\b/) {
+			WARN("struct $1 should normally be const\n" .
+				$herecurr);
 		}
 
 # use of NR_CPUS is usually wrong
diff --git a/scripts/config b/scripts/config
index 68b9761..db6084b 100755
--- a/scripts/config
+++ b/scripts/config
@@ -60,6 +60,10 @@
 	FN=.config
 fi
 
+if [ "$1" = "" ] ; then
+	usage
+fi
+
 while [ "$1" != "" ] ; do
 	CMD="$1"
 	shift
diff --git a/scripts/genksyms/genksyms.c b/scripts/genksyms/genksyms.c
index f8bb4ca..3a8297b 100644
--- a/scripts/genksyms/genksyms.c
+++ b/scripts/genksyms/genksyms.c
@@ -43,7 +43,7 @@
 char *cur_filename;
 
 static int flag_debug, flag_dump_defs, flag_reference, flag_dump_types,
-	   flag_preserve, flag_warnings, flag_asm;
+	   flag_preserve, flag_warnings;
 static const char *arch = "";
 static const char *mod_prefix = "";
 
@@ -610,11 +610,8 @@
 		if (flag_dump_defs)
 			fputs(">\n", debugfile);
 
-		/* Used as assembly source or a linker script. */
-		printf(flag_asm
-		       ? ".equiv %s__crc_%s, %#08lx\n"
-		       : "%s__crc_%s = %#08lx ;\n",
-		       mod_prefix, name, crc);
+		/* Used as a linker script. */
+		printf("%s__crc_%s = 0x%08lx ;\n", mod_prefix, name, crc);
 	}
 }
 
@@ -651,10 +648,9 @@
 
 static void genksyms_usage(void)
 {
-	fputs("Usage:\n" "genksyms [-aAdDTwqhV] > /path/to/.tmp_obj.ver\n" "\n"
+	fputs("Usage:\n" "genksyms [-adDTwqhV] > /path/to/.tmp_obj.ver\n" "\n"
 #ifdef __GNU_LIBRARY__
 	      "  -a, --arch            Select architecture\n"
-	      "  -A, --asm             Generate assembly rather than linker script\n"
 	      "  -d, --debug           Increment the debug level (repeatable)\n"
 	      "  -D, --dump            Dump expanded symbol defs (for debugging only)\n"
 	      "  -r, --reference file  Read reference symbols from a file\n"
@@ -666,7 +662,6 @@
 	      "  -V, --version         Print the release version\n"
 #else				/* __GNU_LIBRARY__ */
 	      "  -a                    Select architecture\n"
-	      "  -A                    Generate assembly rather than linker script\n"
 	      "  -d                    Increment the debug level (repeatable)\n"
 	      "  -D                    Dump expanded symbol defs (for debugging only)\n"
 	      "  -r file               Read reference symbols from a file\n"
@@ -688,7 +683,6 @@
 #ifdef __GNU_LIBRARY__
 	struct option long_opts[] = {
 		{"arch", 1, 0, 'a'},
-		{"asm", 0, 0, 'A'},
 		{"debug", 0, 0, 'd'},
 		{"warnings", 0, 0, 'w'},
 		{"quiet", 0, 0, 'q'},
@@ -701,10 +695,10 @@
 		{0, 0, 0, 0}
 	};
 
-	while ((o = getopt_long(argc, argv, "a:dwqVADr:T:ph",
+	while ((o = getopt_long(argc, argv, "a:dwqVDr:T:ph",
 				&long_opts[0], NULL)) != EOF)
 #else				/* __GNU_LIBRARY__ */
-	while ((o = getopt(argc, argv, "a:dwqVADr:T:ph")) != EOF)
+	while ((o = getopt(argc, argv, "a:dwqVDr:T:ph")) != EOF)
 #endif				/* __GNU_LIBRARY__ */
 		switch (o) {
 		case 'a':
@@ -722,9 +716,6 @@
 		case 'V':
 			fputs("genksyms version 2.5.60\n", stderr);
 			break;
-		case 'A':
-			flag_asm = 1;
-			break;
 		case 'D':
 			flag_dump_defs = 1;
 			break;
diff --git a/scripts/genksyms/keywords.c_shipped b/scripts/genksyms/keywords.c_shipped
index 83484fe..971e011 100644
--- a/scripts/genksyms/keywords.c_shipped
+++ b/scripts/genksyms/keywords.c_shipped
@@ -1,4 +1,4 @@
-/* ANSI-C code produced by gperf version 3.0.1 */
+/* ANSI-C code produced by gperf version 3.0.2 */
 /* Command-line: gperf -L ANSI-C -a -C -E -g -H is_reserved_hash -k '1,3,$' -N is_reserved_word -p -t scripts/genksyms/keywords.gperf  */
 
 #if !((' ' == 32) && ('!' == 33) && ('"' == 34) && ('#' == 35) \
@@ -32,7 +32,7 @@
 
 #line 3 "scripts/genksyms/keywords.gperf"
 struct resword { const char *name; int token; };
-/* maximum key range = 64, duplicates = 0 */
+/* maximum key range = 62, duplicates = 0 */
 
 #ifdef __GNUC__
 __inline
@@ -46,32 +46,32 @@
 {
   static const unsigned char asso_values[] =
     {
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67,  0,
-      67, 67, 67, 67, 67, 67, 15, 67, 67, 67,
-       0, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67,  0, 67,  0, 67,  5,
-      25, 20, 15, 30, 67, 15, 67, 67, 10,  0,
-      10, 40, 20, 67, 10,  5,  0, 10, 15, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65,  5,
+      65, 65, 65, 65, 65, 65, 35, 65, 65, 65,
+       0, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65,  0, 65,  0, 65,  5,
+      20, 15, 10, 30, 65, 15, 65, 65, 20,  0,
+      10, 35, 20, 65, 10,  5,  0, 10,  5, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65
     };
   return len + asso_values[(unsigned char)str[2]] + asso_values[(unsigned char)str[0]] + asso_values[(unsigned char)str[len - 1]];
 }
@@ -84,119 +84,116 @@
 {
   enum
     {
-      TOTAL_KEYWORDS = 45,
+      TOTAL_KEYWORDS = 43,
       MIN_WORD_LENGTH = 3,
       MAX_WORD_LENGTH = 24,
       MIN_HASH_VALUE = 3,
-      MAX_HASH_VALUE = 66
+      MAX_HASH_VALUE = 64
     };
 
   static const struct resword wordlist[] =
     {
       {""}, {""}, {""},
-#line 28 "scripts/genksyms/keywords.gperf"
+#line 26 "scripts/genksyms/keywords.gperf"
       {"asm", ASM_KEYW},
       {""},
-#line 10 "scripts/genksyms/keywords.gperf"
+#line 8 "scripts/genksyms/keywords.gperf"
       {"__asm", ASM_KEYW},
       {""},
-#line 11 "scripts/genksyms/keywords.gperf"
+#line 9 "scripts/genksyms/keywords.gperf"
       {"__asm__", ASM_KEYW},
       {""}, {""},
-#line 54 "scripts/genksyms/keywords.gperf"
+#line 52 "scripts/genksyms/keywords.gperf"
       {"__typeof__", TYPEOF_KEYW},
       {""},
-#line 14 "scripts/genksyms/keywords.gperf"
-      {"__const", CONST_KEYW},
-#line 13 "scripts/genksyms/keywords.gperf"
-      {"__attribute__", ATTRIBUTE_KEYW},
-#line 15 "scripts/genksyms/keywords.gperf"
-      {"__const__", CONST_KEYW},
-#line 20 "scripts/genksyms/keywords.gperf"
-      {"__signed__", SIGNED_KEYW},
-#line 46 "scripts/genksyms/keywords.gperf"
-      {"static", STATIC_KEYW},
-      {""},
-#line 41 "scripts/genksyms/keywords.gperf"
-      {"int", INT_KEYW},
-#line 34 "scripts/genksyms/keywords.gperf"
-      {"char", CHAR_KEYW},
-#line 35 "scripts/genksyms/keywords.gperf"
-      {"const", CONST_KEYW},
-#line 47 "scripts/genksyms/keywords.gperf"
-      {"struct", STRUCT_KEYW},
-#line 26 "scripts/genksyms/keywords.gperf"
-      {"__restrict__", RESTRICT_KEYW},
-#line 27 "scripts/genksyms/keywords.gperf"
-      {"restrict", RESTRICT_KEYW},
-#line 7 "scripts/genksyms/keywords.gperf"
-      {"EXPORT_SYMBOL_GPL_FUTURE", EXPORT_SYMBOL_KEYW},
-#line 18 "scripts/genksyms/keywords.gperf"
-      {"__inline__", INLINE_KEYW},
-      {""},
-#line 22 "scripts/genksyms/keywords.gperf"
-      {"__volatile__", VOLATILE_KEYW},
-#line 5 "scripts/genksyms/keywords.gperf"
-      {"EXPORT_SYMBOL", EXPORT_SYMBOL_KEYW},
-#line 25 "scripts/genksyms/keywords.gperf"
-      {"_restrict", RESTRICT_KEYW},
-      {""},
 #line 12 "scripts/genksyms/keywords.gperf"
-      {"__attribute", ATTRIBUTE_KEYW},
-#line 6 "scripts/genksyms/keywords.gperf"
-      {"EXPORT_SYMBOL_GPL", EXPORT_SYMBOL_KEYW},
+      {"__const", CONST_KEYW},
+#line 11 "scripts/genksyms/keywords.gperf"
+      {"__attribute__", ATTRIBUTE_KEYW},
+#line 13 "scripts/genksyms/keywords.gperf"
+      {"__const__", CONST_KEYW},
+#line 18 "scripts/genksyms/keywords.gperf"
+      {"__signed__", SIGNED_KEYW},
+#line 44 "scripts/genksyms/keywords.gperf"
+      {"static", STATIC_KEYW},
+#line 20 "scripts/genksyms/keywords.gperf"
+      {"__volatile__", VOLATILE_KEYW},
+#line 39 "scripts/genksyms/keywords.gperf"
+      {"int", INT_KEYW},
+#line 32 "scripts/genksyms/keywords.gperf"
+      {"char", CHAR_KEYW},
+#line 33 "scripts/genksyms/keywords.gperf"
+      {"const", CONST_KEYW},
+#line 45 "scripts/genksyms/keywords.gperf"
+      {"struct", STRUCT_KEYW},
+#line 24 "scripts/genksyms/keywords.gperf"
+      {"__restrict__", RESTRICT_KEYW},
+#line 25 "scripts/genksyms/keywords.gperf"
+      {"restrict", RESTRICT_KEYW},
+#line 23 "scripts/genksyms/keywords.gperf"
+      {"_restrict", RESTRICT_KEYW},
 #line 16 "scripts/genksyms/keywords.gperf"
+      {"__inline__", INLINE_KEYW},
+#line 10 "scripts/genksyms/keywords.gperf"
+      {"__attribute", ATTRIBUTE_KEYW},
+      {""},
+#line 14 "scripts/genksyms/keywords.gperf"
       {"__extension__", EXTENSION_KEYW},
-#line 37 "scripts/genksyms/keywords.gperf"
+#line 35 "scripts/genksyms/keywords.gperf"
       {"enum", ENUM_KEYW},
-#line 8 "scripts/genksyms/keywords.gperf"
-      {"EXPORT_UNUSED_SYMBOL", EXPORT_SYMBOL_KEYW},
-#line 38 "scripts/genksyms/keywords.gperf"
+#line 19 "scripts/genksyms/keywords.gperf"
+      {"__volatile", VOLATILE_KEYW},
+#line 36 "scripts/genksyms/keywords.gperf"
       {"extern", EXTERN_KEYW},
       {""},
-#line 19 "scripts/genksyms/keywords.gperf"
-      {"__signed", SIGNED_KEYW},
-#line 9 "scripts/genksyms/keywords.gperf"
-      {"EXPORT_UNUSED_SYMBOL_GPL", EXPORT_SYMBOL_KEYW},
-#line 49 "scripts/genksyms/keywords.gperf"
-      {"union", UNION_KEYW},
-#line 53 "scripts/genksyms/keywords.gperf"
-      {"typeof", TYPEOF_KEYW},
-#line 48 "scripts/genksyms/keywords.gperf"
-      {"typedef", TYPEDEF_KEYW},
 #line 17 "scripts/genksyms/keywords.gperf"
+      {"__signed", SIGNED_KEYW},
+#line 7 "scripts/genksyms/keywords.gperf"
+      {"EXPORT_SYMBOL_GPL_FUTURE", EXPORT_SYMBOL_KEYW},
+      {""},
+#line 51 "scripts/genksyms/keywords.gperf"
+      {"typeof", TYPEOF_KEYW},
+#line 46 "scripts/genksyms/keywords.gperf"
+      {"typedef", TYPEDEF_KEYW},
+#line 15 "scripts/genksyms/keywords.gperf"
       {"__inline", INLINE_KEYW},
-#line 33 "scripts/genksyms/keywords.gperf"
+#line 31 "scripts/genksyms/keywords.gperf"
       {"auto", AUTO_KEYW},
-#line 21 "scripts/genksyms/keywords.gperf"
-      {"__volatile", VOLATILE_KEYW},
+#line 47 "scripts/genksyms/keywords.gperf"
+      {"union", UNION_KEYW},
+      {""}, {""},
+#line 48 "scripts/genksyms/keywords.gperf"
+      {"unsigned", UNSIGNED_KEYW},
+#line 49 "scripts/genksyms/keywords.gperf"
+      {"void", VOID_KEYW},
+#line 42 "scripts/genksyms/keywords.gperf"
+      {"short", SHORT_KEYW},
       {""}, {""},
 #line 50 "scripts/genksyms/keywords.gperf"
-      {"unsigned", UNSIGNED_KEYW},
-      {""},
-#line 44 "scripts/genksyms/keywords.gperf"
-      {"short", SHORT_KEYW},
-#line 40 "scripts/genksyms/keywords.gperf"
-      {"inline", INLINE_KEYW},
-      {""},
-#line 52 "scripts/genksyms/keywords.gperf"
       {"volatile", VOLATILE_KEYW},
-#line 42 "scripts/genksyms/keywords.gperf"
-      {"long", LONG_KEYW},
-#line 24 "scripts/genksyms/keywords.gperf"
-      {"_Bool", BOOL_KEYW},
-      {""}, {""},
-#line 43 "scripts/genksyms/keywords.gperf"
-      {"register", REGISTER_KEYW},
-#line 51 "scripts/genksyms/keywords.gperf"
-      {"void", VOID_KEYW},
-#line 39 "scripts/genksyms/keywords.gperf"
+      {""},
+#line 37 "scripts/genksyms/keywords.gperf"
       {"float", FLOAT_KEYW},
-#line 36 "scripts/genksyms/keywords.gperf"
+#line 34 "scripts/genksyms/keywords.gperf"
       {"double", DOUBLE_KEYW},
-      {""}, {""}, {""}, {""},
-#line 45 "scripts/genksyms/keywords.gperf"
-      {"signed", SIGNED_KEYW}
+      {""},
+#line 5 "scripts/genksyms/keywords.gperf"
+      {"EXPORT_SYMBOL", EXPORT_SYMBOL_KEYW},
+      {""}, {""},
+#line 38 "scripts/genksyms/keywords.gperf"
+      {"inline", INLINE_KEYW},
+#line 6 "scripts/genksyms/keywords.gperf"
+      {"EXPORT_SYMBOL_GPL", EXPORT_SYMBOL_KEYW},
+#line 41 "scripts/genksyms/keywords.gperf"
+      {"register", REGISTER_KEYW},
+      {""},
+#line 22 "scripts/genksyms/keywords.gperf"
+      {"_Bool", BOOL_KEYW},
+#line 43 "scripts/genksyms/keywords.gperf"
+      {"signed", SIGNED_KEYW},
+      {""}, {""},
+#line 40 "scripts/genksyms/keywords.gperf"
+      {"long", LONG_KEYW}
     };
 
   if (len <= MAX_WORD_LENGTH && len >= MIN_WORD_LENGTH)
diff --git a/scripts/genksyms/keywords.gperf b/scripts/genksyms/keywords.gperf
index 8abe7ab..5ef3733 100644
--- a/scripts/genksyms/keywords.gperf
+++ b/scripts/genksyms/keywords.gperf
@@ -5,8 +5,6 @@
 EXPORT_SYMBOL, EXPORT_SYMBOL_KEYW
 EXPORT_SYMBOL_GPL, EXPORT_SYMBOL_KEYW
 EXPORT_SYMBOL_GPL_FUTURE, EXPORT_SYMBOL_KEYW
-EXPORT_UNUSED_SYMBOL, EXPORT_SYMBOL_KEYW
-EXPORT_UNUSED_SYMBOL_GPL, EXPORT_SYMBOL_KEYW
 __asm, ASM_KEYW
 __asm__, ASM_KEYW
 __attribute, ATTRIBUTE_KEYW
diff --git a/scripts/kallsyms.c b/scripts/kallsyms.c
index 9275812..ad2434b 100644
--- a/scripts/kallsyms.c
+++ b/scripts/kallsyms.c
@@ -130,9 +130,18 @@
 static int symbol_valid(struct sym_entry *s)
 {
 	/* Symbols which vary between passes.  Passes 1 and 2 must have
-	 * identical symbol lists.
+	 * identical symbol lists.  The kallsyms_* symbols below are only added
+	 * after pass 1, they would be included in pass 2 when --all-symbols is
+	 * specified so exclude them to get a stable symbol list.
 	 */
 	static char *special_symbols[] = {
+		"kallsyms_addresses",
+		"kallsyms_num_syms",
+		"kallsyms_names",
+		"kallsyms_markers",
+		"kallsyms_token_table",
+		"kallsyms_token_index",
+
 	/* Exclude linker generated symbols which vary between passes */
 		"_SDA_BASE_",		/* ppc */
 		"_SDA2_BASE_",		/* ppc */
@@ -164,9 +173,7 @@
 	}
 
 	/* Exclude symbols which vary between passes. */
-	if (strstr((char *)s->sym + offset, "_compiled.") ||
-	    strncmp((char*)s->sym + offset, "__compound_literal.", 19) == 0 ||
-	    strncmp((char*)s->sym + offset, "__compound_literal$", 19) == 0)
+	if (strstr((char *)s->sym + offset, "_compiled."))
 		return 0;
 
 	for (i = 0; special_symbols[i]; i++)
@@ -543,10 +550,8 @@
 		usage();
 
 	read_map(stdin);
-	if (table_cnt) {
-		sort_symbols();
-		optimize_token_table();
-	}
+	sort_symbols();
+	optimize_token_table();
 	write_src();
 
 	return 0;
diff --git a/scripts/mksysmap b/scripts/mksysmap
index 1db316a..6e133a0 100644
--- a/scripts/mksysmap
+++ b/scripts/mksysmap
@@ -37,6 +37,9 @@
 
 # readprofile starts reading symbols when _stext is found, and
 # continue until it finds a symbol which is not either of 'T', 't',
-# 'W' or 'w'.
+# 'W' or 'w'. __crc_ are 'A' and placed in the middle
+# so we just ignore them to let readprofile continue to work.
+# (At least sparc64 has __crc_ in the middle).
 
-$NM -n $1 | grep -v '\( [aNUw] \)\|\( \$[adt]\)' > $2
+$NM -n $1 | grep -v '\( [aNUw] \)\|\(__crc_\)\|\( \$[adt]\)' > $2
+
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index d4dc222..491b8b1 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -366,11 +366,17 @@
 
 	for (i = 0; i < count; i++) {
 		const char *id = (char *)devs[i].id;
+		char acpi_id[sizeof(devs[0].id)];
+		int j;
 
 		buf_printf(&mod->dev_table_buf,
 			   "MODULE_ALIAS(\"pnp:d%s*\");\n", id);
+
+		/* fix broken pnp bus lowercasing */
+		for (j = 0; j < sizeof(acpi_id); j++)
+			acpi_id[j] = toupper(id[j]);
 		buf_printf(&mod->dev_table_buf,
-			   "MODULE_ALIAS(\"acpi*:%s:*\");\n", id);
+			   "MODULE_ALIAS(\"acpi*:%s:*\");\n", acpi_id);
 	}
 }
 
@@ -416,10 +422,17 @@
 
 			/* add an individual alias for every device entry */
 			if (!dup) {
+				char acpi_id[sizeof(card->devs[0].id)];
+				int k;
+
 				buf_printf(&mod->dev_table_buf,
 					   "MODULE_ALIAS(\"pnp:d%s*\");\n", id);
+
+				/* fix broken pnp bus lowercasing */
+				for (k = 0; k < sizeof(acpi_id); k++)
+					acpi_id[k] = toupper(id[k]);
 				buf_printf(&mod->dev_table_buf,
-					   "MODULE_ALIAS(\"acpi*:%s:*\");\n", id);
+					   "MODULE_ALIAS(\"acpi*:%s:*\");\n", acpi_id);
 			}
 		}
 	}
diff --git a/scripts/strip-symbols b/scripts/strip-symbols
deleted file mode 100644
index 29ee8c1..0000000
--- a/scripts/strip-symbols
+++ /dev/null
@@ -1,22 +0,0 @@
-<*>
-*.h
-__compound_literal[$.][0-9]*
-__crc_[a-zA-Z_]*
-__exitcall_[a-zA-Z_]*
-__func__[$.][0-9]*
-__FUNCTION__[$.][0-9]*
-gcc[0-9]_compiled[$.]
-__initcall_[a-zA-Z_]*
-__kcrctab_[a-zA-Z_]*
-__kstrtab_[a-zA-Z_]*
-__ksymtab_[a-zA-Z_]*
-__mod_[a-zA-Z_]*[0-9]
-__module_depends
-__param_[a-zA-Z_]*
-__pci_fixup_*PCI_ANY_IDPCI_ANY_ID*
-__pci_fixup_*PCI_ANY_IDPCI_DEVICE_ID_*
-__pci_fixup_*PCI_VENDOR_ID_*PCI_ANY_ID*
-__pci_fixup_*PCI_VENDOR_ID_*PCI_DEVICE_ID_*
-__PRETTY_FUNCTION__[$.][0-9]*
-__setup_[a-zA-Z_]*
-____versions
diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index 0979679..b1ec3b4 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -54,11 +54,11 @@
  * - returns the new key's serial number
  * - implements add_key()
  */
-asmlinkage long sys_add_key(const char __user *_type,
-			    const char __user *_description,
-			    const void __user *_payload,
-			    size_t plen,
-			    key_serial_t ringid)
+SYSCALL_DEFINE5(add_key, const char __user *, _type,
+		const char __user *, _description,
+		const void __user *, _payload,
+		size_t, plen,
+		key_serial_t, ringid)
 {
 	key_ref_t keyring_ref, key_ref;
 	char type[32], *description;
@@ -146,10 +146,10 @@
  *   - if the _callout_info string is empty, it will be rendered as "-"
  * - implements request_key()
  */
-asmlinkage long sys_request_key(const char __user *_type,
-				const char __user *_description,
-				const char __user *_callout_info,
-				key_serial_t destringid)
+SYSCALL_DEFINE4(request_key, const char __user *, _type,
+		const char __user *, _description,
+		const char __user *, _callout_info,
+		key_serial_t, destringid)
 {
 	struct key_type *ktype;
 	struct key *key;
@@ -270,6 +270,7 @@
 
 	/* join the session */
 	ret = join_session_keyring(name);
+	kfree(name);
 
  error:
 	return ret;
@@ -1216,8 +1217,8 @@
 /*
  * the key control system call
  */
-asmlinkage long sys_keyctl(int option, unsigned long arg2, unsigned long arg3,
-			   unsigned long arg4, unsigned long arg5)
+SYSCALL_DEFINE5(keyctl, int, option, unsigned long, arg2, unsigned long, arg3,
+		unsigned long, arg4, unsigned long, arg5)
 {
 	switch (option) {
 	case KEYCTL_GET_KEYRING_ID:
diff --git a/security/smack/smackfs.c b/security/smack/smackfs.c
index 71e2b91..8e42800 100644
--- a/security/smack/smackfs.c
+++ b/security/smack/smackfs.c
@@ -334,7 +334,7 @@
 		break;
 	case 'a':
 	case 'A':
-		rule.smk_access |= MAY_READ;
+		rule.smk_access |= MAY_APPEND;
 		break;
 	default:
 		goto out;
diff --git a/sound/core/misc.c b/sound/core/misc.c
index 38524f6..a9710e0 100644
--- a/sound/core/misc.c
+++ b/sound/core/misc.c
@@ -95,12 +95,14 @@
 {
 	const struct snd_pci_quirk *q;
 
-	for (q = list; q->subvendor; q++)
-		if (q->subvendor == pci->subsystem_vendor &&
-		    (!q->subdevice || q->subdevice == pci->subsystem_device))
+	for (q = list; q->subvendor; q++) {
+		if (q->subvendor != pci->subsystem_vendor)
+			continue;
+		if (!q->subdevice ||
+		    (pci->subsystem_device & q->subdevice_mask) == q->subdevice)
 			return q;
+	}
 	return NULL;
 }
-
 EXPORT_SYMBOL(snd_pci_quirk_lookup);
 #endif
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
index 6e3a184..82b9bdd 100644
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -744,8 +744,8 @@
 	select SND_OXYGEN_LIB
 	help
 	  Say Y here to include support for sound cards based on the
-	  Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2, D2X and
-	  HDAV1.3 (Deluxe).
+	  Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2 and D2X.
+	  Support for the HDAV1.3 (Deluxe) is very experimental.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-virtuoso.
diff --git a/sound/pci/hda/hda_beep.c b/sound/pci/hda/hda_beep.c
index 960fd79..4de5bac 100644
--- a/sound/pci/hda/hda_beep.c
+++ b/sound/pci/hda/hda_beep.c
@@ -138,6 +138,7 @@
 
 		input_unregister_device(beep->dev);
 		kfree(beep);
+		codec->beep = NULL;
 	}
 }
 EXPORT_SYMBOL_HDA(snd_hda_detach_beep_device);
diff --git a/sound/pci/hda/hda_beep.h b/sound/pci/hda/hda_beep.h
index b9679f0..51bf6a5 100644
--- a/sound/pci/hda/hda_beep.h
+++ b/sound/pci/hda/hda_beep.h
@@ -39,7 +39,7 @@
 int snd_hda_attach_beep_device(struct hda_codec *codec, int nid);
 void snd_hda_detach_beep_device(struct hda_codec *codec);
 #else
-#define snd_hda_attach_beep_device(...)
+#define snd_hda_attach_beep_device(...)		0
 #define snd_hda_detach_beep_device(...)
 #endif
 #endif
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index d03f992..98884bc 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -1120,6 +1120,7 @@
 	u16 nid = get_amp_nid(kcontrol);
 	u8 chs = get_amp_channels(kcontrol);
 	int dir = get_amp_direction(kcontrol);
+	unsigned int ofs = get_amp_offset(kcontrol);
 	u32 caps;
 
 	caps = query_amp_caps(codec, nid, dir);
@@ -1131,6 +1132,8 @@
 		       kcontrol->id.name);
 		return -EINVAL;
 	}
+	if (ofs < caps)
+		caps -= ofs;
 	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
 	uinfo->count = chs == 3 ? 2 : 1;
 	uinfo->value.integer.min = 0;
@@ -1139,6 +1142,32 @@
 }
 EXPORT_SYMBOL_HDA(snd_hda_mixer_amp_volume_info);
 
+
+static inline unsigned int
+read_amp_value(struct hda_codec *codec, hda_nid_t nid,
+	       int ch, int dir, int idx, unsigned int ofs)
+{
+	unsigned int val;
+	val = snd_hda_codec_amp_read(codec, nid, ch, dir, idx);
+	val &= HDA_AMP_VOLMASK;
+	if (val >= ofs)
+		val -= ofs;
+	else
+		val = 0;
+	return val;
+}
+
+static inline int
+update_amp_value(struct hda_codec *codec, hda_nid_t nid,
+		 int ch, int dir, int idx, unsigned int ofs,
+		 unsigned int val)
+{
+	if (val > 0)
+		val += ofs;
+	return snd_hda_codec_amp_update(codec, nid, ch, dir, idx,
+					HDA_AMP_VOLMASK, val);
+}
+
 int snd_hda_mixer_amp_volume_get(struct snd_kcontrol *kcontrol,
 				 struct snd_ctl_elem_value *ucontrol)
 {
@@ -1147,14 +1176,13 @@
 	int chs = get_amp_channels(kcontrol);
 	int dir = get_amp_direction(kcontrol);
 	int idx = get_amp_index(kcontrol);
+	unsigned int ofs = get_amp_offset(kcontrol);
 	long *valp = ucontrol->value.integer.value;
 
 	if (chs & 1)
-		*valp++ = snd_hda_codec_amp_read(codec, nid, 0, dir, idx)
-			& HDA_AMP_VOLMASK;
+		*valp++ = read_amp_value(codec, nid, 0, dir, idx, ofs);
 	if (chs & 2)
-		*valp = snd_hda_codec_amp_read(codec, nid, 1, dir, idx)
-			& HDA_AMP_VOLMASK;
+		*valp = read_amp_value(codec, nid, 1, dir, idx, ofs);
 	return 0;
 }
 EXPORT_SYMBOL_HDA(snd_hda_mixer_amp_volume_get);
@@ -1167,18 +1195,17 @@
 	int chs = get_amp_channels(kcontrol);
 	int dir = get_amp_direction(kcontrol);
 	int idx = get_amp_index(kcontrol);
+	unsigned int ofs = get_amp_offset(kcontrol);
 	long *valp = ucontrol->value.integer.value;
 	int change = 0;
 
 	snd_hda_power_up(codec);
 	if (chs & 1) {
-		change = snd_hda_codec_amp_update(codec, nid, 0, dir, idx,
-						  0x7f, *valp);
+		change = update_amp_value(codec, nid, 0, dir, idx, ofs, *valp);
 		valp++;
 	}
 	if (chs & 2)
-		change |= snd_hda_codec_amp_update(codec, nid, 1, dir, idx,
-						   0x7f, *valp);
+		change |= update_amp_value(codec, nid, 1, dir, idx, ofs, *valp);
 	snd_hda_power_down(codec);
 	return change;
 }
@@ -1190,6 +1217,7 @@
 	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
 	hda_nid_t nid = get_amp_nid(kcontrol);
 	int dir = get_amp_direction(kcontrol);
+	unsigned int ofs = get_amp_offset(kcontrol);
 	u32 caps, val1, val2;
 
 	if (size < 4 * sizeof(unsigned int))
@@ -1198,6 +1226,7 @@
 	val2 = (caps & AC_AMPCAP_STEP_SIZE) >> AC_AMPCAP_STEP_SIZE_SHIFT;
 	val2 = (val2 + 1) * 25;
 	val1 = -((caps & AC_AMPCAP_OFFSET) >> AC_AMPCAP_OFFSET_SHIFT);
+	val1 += ofs;
 	val1 = ((int)val1) * ((int)val2);
 	if (put_user(SNDRV_CTL_TLVT_DB_SCALE, _tlv))
 		return -EFAULT;
@@ -1955,6 +1984,8 @@
 	}
 	for (dig_mix = dig_in_ctls; dig_mix->name; dig_mix++) {
 		kctl = snd_ctl_new1(dig_mix, codec);
+		if (!kctl)
+			return -ENOMEM;
 		kctl->private_value = nid;
 		err = snd_hda_ctl_add(codec, kctl);
 		if (err < 0)
@@ -2614,7 +2645,7 @@
 		int dev;
 
 		if (!cpcm->stream[0].substreams && !cpcm->stream[1].substreams)
-			return 0; /* no substreams assigned */
+			continue; /* no substreams assigned */
 
 		if (!cpcm->pcm) {
 			dev = get_empty_pcm_device(codec->bus, cpcm->pcm_type);
@@ -3401,10 +3432,22 @@
 			cfg->input_pins[AUTO_PIN_AUX] = nid;
 			break;
 		case AC_JACK_SPDIF_OUT:
-			cfg->dig_out_pin = nid;
+		case AC_JACK_DIG_OTHER_OUT:
+			if (cfg->dig_outs >= ARRAY_SIZE(cfg->dig_out_pins))
+				continue;
+			cfg->dig_out_pins[cfg->dig_outs] = nid;
+			cfg->dig_out_type[cfg->dig_outs] =
+				(loc == AC_JACK_LOC_HDMI) ?
+				HDA_PCM_TYPE_HDMI : HDA_PCM_TYPE_SPDIF;
+			cfg->dig_outs++;
 			break;
 		case AC_JACK_SPDIF_IN:
+		case AC_JACK_DIG_OTHER_IN:
 			cfg->dig_in_pin = nid;
+			if (loc == AC_JACK_LOC_HDMI)
+				cfg->dig_in_type = HDA_PCM_TYPE_HDMI;
+			else
+				cfg->dig_in_type = HDA_PCM_TYPE_SPDIF;
 			break;
 		}
 	}
@@ -3510,6 +3553,9 @@
 		   cfg->hp_pins[1], cfg->hp_pins[2],
 		   cfg->hp_pins[3], cfg->hp_pins[4]);
 	snd_printd("   mono: mono_out=0x%x\n", cfg->mono_out_pin);
+	if (cfg->dig_outs)
+		snd_printd("   dig-out=0x%x/0x%x\n",
+			   cfg->dig_out_pins[0], cfg->dig_out_pins[1]);
 	snd_printd("   inputs: mic=0x%x, fmic=0x%x, line=0x%x, fline=0x%x,"
 		   " cd=0x%x, aux=0x%x\n",
 		   cfg->input_pins[AUTO_PIN_MIC],
@@ -3518,6 +3564,8 @@
 		   cfg->input_pins[AUTO_PIN_FRONT_LINE],
 		   cfg->input_pins[AUTO_PIN_CD],
 		   cfg->input_pins[AUTO_PIN_AUX]);
+	if (cfg->dig_in_pin)
+		snd_printd("   dig-in=0x%x\n", cfg->dig_in_pin);
 
 	return 0;
 }
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 11e791b..e853e4a 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -381,6 +381,7 @@
 
 	/* HD codec */
 	unsigned short codec_mask;
+	int  codec_probe_mask; /* copied from probe_mask option */
 	struct hda_bus *bus;
 
 	/* CORB/RIRB */
@@ -1228,7 +1229,6 @@
 };
 
 static int __devinit azx_codec_create(struct azx *chip, const char *model,
-				      unsigned int codec_probe_mask,
 				      int no_init)
 {
 	struct hda_bus_template bus_temp;
@@ -1261,7 +1261,7 @@
 
 	/* First try to probe all given codec slots */
 	for (c = 0; c < max_slots; c++) {
-		if ((chip->codec_mask & (1 << c)) & codec_probe_mask) {
+		if ((chip->codec_mask & (1 << c)) & chip->codec_probe_mask) {
 			if (probe_codec(chip, c) < 0) {
 				/* Some BIOSen give you wrong codec addresses
 				 * that don't exist
@@ -1285,7 +1285,7 @@
 
 	/* Then create codec instances */
 	for (c = 0; c < max_slots; c++) {
-		if ((chip->codec_mask & (1 << c)) & codec_probe_mask) {
+		if ((chip->codec_mask & (1 << c)) & chip->codec_probe_mask) {
 			struct hda_codec *codec;
 			err = snd_hda_codec_new(chip->bus, c, !no_init, &codec);
 			if (err < 0)
@@ -2098,23 +2098,36 @@
 	SND_PCI_QUIRK(0x1028, 0x20ac, "Dell Studio Desktop", 0x01),
 	/* including bogus ALC268 in slot#2 that conflicts with ALC888 */
 	SND_PCI_QUIRK(0x17c0, 0x4085, "Medion MD96630", 0x01),
+	/* forced codec slots */
+	SND_PCI_QUIRK(0x1046, 0x1262, "ASUS W5F", 0x103),
 	{}
 };
 
+#define AZX_FORCE_CODEC_MASK	0x100
+
 static void __devinit check_probe_mask(struct azx *chip, int dev)
 {
 	const struct snd_pci_quirk *q;
 
-	if (probe_mask[dev] == -1) {
+	chip->codec_probe_mask = probe_mask[dev];
+	if (chip->codec_probe_mask == -1) {
 		q = snd_pci_quirk_lookup(chip->pci, probe_mask_list);
 		if (q) {
 			printk(KERN_INFO
 			       "hda_intel: probe_mask set to 0x%x "
 			       "for device %04x:%04x\n",
 			       q->value, q->subvendor, q->subdevice);
-			probe_mask[dev] = q->value;
+			chip->codec_probe_mask = q->value;
 		}
 	}
+
+	/* check forced option */
+	if (chip->codec_probe_mask != -1 &&
+	    (chip->codec_probe_mask & AZX_FORCE_CODEC_MASK)) {
+		chip->codec_mask = chip->codec_probe_mask & 0xff;
+		printk(KERN_INFO "hda_intel: codec_mask forced to 0x%x\n",
+		       chip->codec_mask);
+	}
 }
 
 
@@ -2347,8 +2360,7 @@
 	card->private_data = chip;
 
 	/* create codec instances */
-	err = azx_codec_create(chip, model[dev], probe_mask[dev],
-			       probe_only[dev]);
+	err = azx_codec_create(chip, model[dev], probe_only[dev]);
 	if (err < 0)
 		goto out_free;
 
diff --git a/sound/pci/hda/hda_local.h b/sound/pci/hda/hda_local.h
index 44f189c..84e2cf6 100644
--- a/sound/pci/hda/hda_local.h
+++ b/sound/pci/hda/hda_local.h
@@ -26,8 +26,10 @@
 /*
  * for mixer controls
  */
+#define HDA_COMPOSE_AMP_VAL_OFS(nid,chs,idx,dir,ofs)		\
+	((nid) | ((chs)<<16) | ((dir)<<18) | ((idx)<<19) | ((ofs)<<23))
 #define HDA_COMPOSE_AMP_VAL(nid,chs,idx,dir) \
-	((nid) | ((chs)<<16) | ((dir)<<18) | ((idx)<<19))
+	HDA_COMPOSE_AMP_VAL_OFS(nid, chs, idx, dir, 0)
 /* mono volume with index (index=0,1,...) (channel=1,2) */
 #define HDA_CODEC_VOLUME_MONO_IDX(xname, xcidx, nid, channel, xindex, direction) \
 	{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xcidx,  \
@@ -227,6 +229,7 @@
 	hda_nid_t hp_nid;	/* optional DAC for HP, 0 when not exists */
 	hda_nid_t extra_out_nid[3];	/* optional DACs, 0 when not exists */
 	hda_nid_t dig_out_nid;	/* digital out audio widget */
+	hda_nid_t *slave_dig_outs;
 	int max_channels;	/* currently supported analog channels */
 	int dig_out_used;	/* current usage of digital out (HDA_DIG_XXX) */
 	int no_share_stream;	/* don't share a stream with multiple pins */
@@ -354,9 +357,12 @@
 	int line_out_type;	/* AUTO_PIN_XXX_OUT */
 	hda_nid_t hp_pins[AUTO_CFG_MAX_OUTS];
 	hda_nid_t input_pins[AUTO_PIN_LAST];
-	hda_nid_t dig_out_pin;
+	int dig_outs;
+	hda_nid_t dig_out_pins[2];
 	hda_nid_t dig_in_pin;
 	hda_nid_t mono_out_pin;
+	int dig_out_type[2]; /* HDA_PCM_TYPE_XXX */
+	int dig_in_type; /* HDA_PCM_TYPE_XXX */
 };
 
 #define get_defcfg_connect(cfg) \
@@ -458,6 +464,7 @@
 #define get_amp_channels(kc)	(((kc)->private_value >> 16) & 0x3)
 #define get_amp_direction(kc)	(((kc)->private_value >> 18) & 0x1)
 #define get_amp_index(kc)	(((kc)->private_value >> 19) & 0xf)
+#define get_amp_offset(kc)	(((kc)->private_value >> 23) & 0x3f)
 
 /*
  * CEA Short Audio Descriptor data
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index e4861232..af6b003 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -27,11 +27,12 @@
 #include <sound/core.h>
 #include "hda_codec.h"
 #include "hda_local.h"
+#include "hda_beep.h"
 
 struct ad198x_spec {
 	struct snd_kcontrol_new *mixers[5];
 	int num_mixers;
-
+	unsigned int beep_amp;	/* beep amp value, set via set_beep_amp() */
 	const struct hda_verb *init_verbs[5];	/* initialization verbs
 						 * don't forget NULL termination!
 						 */
@@ -154,6 +155,16 @@
 
 static void ad198x_free_kctls(struct hda_codec *codec);
 
+/* additional beep mixers; the actual parameters are overwritten at build */
+static struct snd_kcontrol_new ad_beep_mixer[] = {
+	HDA_CODEC_VOLUME("Beep Playback Volume", 0, 0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Beep Playback Switch", 0, 0, HDA_OUTPUT),
+	{ } /* end */
+};
+
+#define set_beep_amp(spec, nid, idx, dir) \
+	((spec)->beep_amp = HDA_COMPOSE_AMP_VAL(nid, 1, idx, dir)) /* mono */
+
 static int ad198x_build_controls(struct hda_codec *codec)
 {
 	struct ad198x_spec *spec = codec->spec;
@@ -181,6 +192,21 @@
 			return err;
 	}
 
+	/* create beep controls if needed */
+	if (spec->beep_amp) {
+		struct snd_kcontrol_new *knew;
+		for (knew = ad_beep_mixer; knew->name; knew++) {
+			struct snd_kcontrol *kctl;
+			kctl = snd_ctl_new1(knew, codec);
+			if (!kctl)
+				return -ENOMEM;
+			kctl->private_value = spec->beep_amp;
+			err = snd_hda_ctl_add(codec, kctl);
+			if (err < 0)
+				return err;
+		}
+	}
+
 	/* if we have no master control, let's create it */
 	if (!snd_hda_find_mixer_ctl(codec, "Master Playback Volume")) {
 		unsigned int vmaster_tlv[4];
@@ -406,7 +432,8 @@
 		return;
 
 	ad198x_free_kctls(codec);
-	kfree(codec->spec);
+	kfree(spec);
+	snd_hda_detach_beep_device(codec);
 }
 
 static struct hda_codec_ops ad198x_patch_ops = {
@@ -545,8 +572,6 @@
 	HDA_CODEC_VOLUME("Mic Playback Volume", 0x13, 0x0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Mic Playback Switch", 0x13, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME("Mic Boost", 0x0f, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x18, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x18, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME("Mono Playback Volume", 0x1e, 0x0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Mono Playback Switch", 0x1e, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME("Capture Volume", 0x12, 0x0, HDA_OUTPUT),
@@ -610,8 +635,7 @@
 	HDA_CODEC_VOLUME("Mic Playback Volume", 0x13, 0x0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Mic Playback Switch", 0x13, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME("Mic Boost", 0x0f, 0x0, HDA_OUTPUT),
-	/* HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x18, 0x0, HDA_OUTPUT),
-	   HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x18, 0x0, HDA_OUTPUT),
+	/* 
 	   HDA_CODEC_VOLUME("Mono Playback Volume", 0x1e, 0x0, HDA_OUTPUT),
 	   HDA_CODEC_MUTE("Mono Playback Switch", 0x1e, 0x0, HDA_OUTPUT), */
 	HDA_CODEC_VOLUME("Capture Volume", 0x12, 0x0, HDA_OUTPUT),
@@ -809,8 +833,6 @@
 	HDA_CODEC_VOLUME("Mic Playback Volume", 0x13, 0x0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Mic Playback Switch", 0x13, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME("Mic Boost", 0x0f, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME("Beep Playback Volume", 0x18, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Beep Playback Switch", 0x18, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME("Capture Volume", 0x12, 0x0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Capture Switch", 0x12, 0x0, HDA_OUTPUT),
 	{
@@ -1002,10 +1024,8 @@
 	SND_PCI_QUIRK(0x1179, 0xff40, "Toshiba", AD1986A_LAPTOP_EAPD),
 	SND_PCI_QUIRK(0x144d, 0xb03c, "Samsung R55", AD1986A_3STACK),
 	SND_PCI_QUIRK(0x144d, 0xc01e, "FSC V2060", AD1986A_LAPTOP),
-	SND_PCI_QUIRK(0x144d, 0xc023, "Samsung X60", AD1986A_SAMSUNG),
-	SND_PCI_QUIRK(0x144d, 0xc024, "Samsung R65", AD1986A_SAMSUNG),
-	SND_PCI_QUIRK(0x144d, 0xc026, "Samsung X11", AD1986A_SAMSUNG),
 	SND_PCI_QUIRK(0x144d, 0xc027, "Samsung Q1", AD1986A_ULTRA),
+	SND_PCI_QUIRK_MASK(0x144d, 0xff00, 0xc000, "Samsung", AD1986A_SAMSUNG),
 	SND_PCI_QUIRK(0x144d, 0xc504, "Samsung Q35", AD1986A_3STACK),
 	SND_PCI_QUIRK(0x17aa, 0x1011, "Lenovo M55", AD1986A_LAPTOP),
 	SND_PCI_QUIRK(0x17aa, 0x1017, "Lenovo A60", AD1986A_3STACK),
@@ -1035,7 +1055,7 @@
 static int patch_ad1986a(struct hda_codec *codec)
 {
 	struct ad198x_spec *spec;
-	int board_config;
+	int err, board_config;
 
 	spec = kzalloc(sizeof(*spec), GFP_KERNEL);
 	if (spec == NULL)
@@ -1043,6 +1063,13 @@
 
 	codec->spec = spec;
 
+	err = snd_hda_attach_beep_device(codec, 0x19);
+	if (err < 0) {
+		ad198x_free(codec);
+		return err;
+	}
+	set_beep_amp(spec, 0x18, 0, HDA_OUTPUT);
+
 	spec->multiout.max_channels = 6;
 	spec->multiout.num_dacs = ARRAY_SIZE(ad1986a_dac_nids);
 	spec->multiout.dac_nids = ad1986a_dac_nids;
@@ -1222,8 +1249,6 @@
 	HDA_CODEC_MUTE("Mic Playback Switch", 0x12, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME("Line Playback Volume", 0x13, 0x0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Line Playback Switch", 0x13, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME_MONO("PC Speaker Playback Volume", 0x10, 1, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE_MONO("PC Speaker Playback Switch", 0x10, 1, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME("Mic Boost", 0x0c, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME("Capture Volume", 0x15, 0x0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Capture Switch", 0x15, 0x0, HDA_OUTPUT),
@@ -1294,6 +1319,7 @@
 static int patch_ad1983(struct hda_codec *codec)
 {
 	struct ad198x_spec *spec;
+	int err;
 
 	spec = kzalloc(sizeof(*spec), GFP_KERNEL);
 	if (spec == NULL)
@@ -1301,6 +1327,13 @@
 
 	codec->spec = spec;
 
+	err = snd_hda_attach_beep_device(codec, 0x10);
+	if (err < 0) {
+		ad198x_free(codec);
+		return err;
+	}
+	set_beep_amp(spec, 0x10, 0, HDA_OUTPUT);
+
 	spec->multiout.max_channels = 2;
 	spec->multiout.num_dacs = ARRAY_SIZE(ad1983_dac_nids);
 	spec->multiout.dac_nids = ad1983_dac_nids;
@@ -1370,8 +1403,6 @@
 	HDA_CODEC_MUTE("Mic Playback Switch", 0x1c, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME("CD Playback Volume", 0x1d, 0x0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("CD Playback Switch", 0x1d, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME_MONO("PC Speaker Playback Volume", 0x0d, 1, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE_MONO("PC Speaker Playback Switch", 0x0d, 1, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME("Front Mic Boost", 0x08, 0x0, HDA_INPUT),
 	HDA_CODEC_VOLUME("Mic Boost", 0x18, 0x0, HDA_INPUT),
 	HDA_CODEC_VOLUME("Capture Volume", 0x15, 0x0, HDA_OUTPUT),
@@ -1416,8 +1447,8 @@
 	{0x1e, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
 	{0x1f, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080},
 	/* Mic boost: 0dB */
-	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
-	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
+	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
 	/* Record selector: Front mic */
 	{0x15, AC_VERB_SET_CONNECT_SEL, 0x0},
 	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080},
@@ -1682,10 +1713,10 @@
 	SND_PCI_QUIRK(0x1014, 0x0597, "Lenovo Z60", AD1981_THINKPAD),
 	SND_PCI_QUIRK(0x1014, 0x05b7, "Lenovo Z60m", AD1981_THINKPAD),
 	/* All HP models */
-	SND_PCI_QUIRK(0x103c, 0, "HP nx", AD1981_HP),
+	SND_PCI_QUIRK_VENDOR(0x103c, "HP nx", AD1981_HP),
 	SND_PCI_QUIRK(0x1179, 0x0001, "Toshiba U205", AD1981_TOSHIBA),
 	/* Lenovo Thinkpad T60/X60/Z6xx */
-	SND_PCI_QUIRK(0x17aa, 0, "Lenovo Thinkpad", AD1981_THINKPAD),
+	SND_PCI_QUIRK_VENDOR(0x17aa, "Lenovo Thinkpad", AD1981_THINKPAD),
 	/* HP nx6320 (reversed SSID, H/W bug) */
 	SND_PCI_QUIRK(0x30b0, 0x103c, "HP nx6320", AD1981_HP),
 	{}
@@ -1694,7 +1725,7 @@
 static int patch_ad1981(struct hda_codec *codec)
 {
 	struct ad198x_spec *spec;
-	int board_config;
+	int err, board_config;
 
 	spec = kzalloc(sizeof(*spec), GFP_KERNEL);
 	if (spec == NULL)
@@ -1702,6 +1733,13 @@
 
 	codec->spec = spec;
 
+	err = snd_hda_attach_beep_device(codec, 0x10);
+	if (err < 0) {
+		ad198x_free(codec);
+		return err;
+	}
+	set_beep_amp(spec, 0x0d, 0, HDA_OUTPUT);
+
 	spec->multiout.max_channels = 2;
 	spec->multiout.num_dacs = ARRAY_SIZE(ad1981_dac_nids);
 	spec->multiout.dac_nids = ad1981_dac_nids;
@@ -1988,9 +2026,6 @@
 	HDA_CODEC_VOLUME("Mic Playback Volume", 0x20, 0x4, HDA_INPUT),
 	HDA_CODEC_MUTE("Mic Playback Switch", 0x20, 0x4, HDA_INPUT),
 
-	HDA_CODEC_VOLUME("Beep Playback Volume", 0x10, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Beep Playback Switch", 0x10, 0x0, HDA_OUTPUT),
-
 	HDA_CODEC_VOLUME("Analog Mix Playback Volume", 0x21, 0x0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Analog Mix Playback Switch", 0x21, 0x0, HDA_OUTPUT),
 
@@ -2034,9 +2069,6 @@
 	HDA_CODEC_VOLUME("Mic Playback Volume", 0x20, 0x4, HDA_INPUT),
 	HDA_CODEC_MUTE("Mic Playback Switch", 0x20, 0x4, HDA_INPUT),
 
-	HDA_CODEC_VOLUME("Beep Playback Volume", 0x10, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Beep Playback Switch", 0x10, 0x0, HDA_OUTPUT),
-
 	HDA_CODEC_VOLUME("Analog Mix Playback Volume", 0x21, 0x0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Analog Mix Playback Switch", 0x21, 0x0, HDA_OUTPUT),
 
@@ -2066,9 +2098,6 @@
 	HDA_CODEC_VOLUME("Line Playback Volume", 0x20, 0x1, HDA_INPUT),
 	HDA_CODEC_MUTE("Line Playback Switch", 0x20, 0x1, HDA_INPUT),
 
-	HDA_CODEC_VOLUME("Beep Playback Volume", 0x10, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Beep Playback Switch", 0x10, 0x0, HDA_OUTPUT),
-
 	HDA_CODEC_VOLUME("Analog Mix Playback Volume", 0x21, 0x0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Analog Mix Playback Switch", 0x21, 0x0, HDA_OUTPUT),
 
@@ -2297,10 +2326,6 @@
 	{0x0c, AC_VERB_SET_CONNECT_SEL, 0x1},
 	{0x0d, AC_VERB_SET_CONNECT_SEL, 0x1},
 	{0x0e, AC_VERB_SET_CONNECT_SEL, 0x1},
-	/* ADCs; muted */
-	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
 
 	{ }
 };
@@ -2408,10 +2433,6 @@
 	{0x0c, AC_VERB_SET_CONNECT_SEL, 0x1},
 	{0x0d, AC_VERB_SET_CONNECT_SEL, 0x1},
 	{0x0e, AC_VERB_SET_CONNECT_SEL, 0x1},
-	/* ADCs; muted */
-	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
 	/* Analog Mix output amp */
 	{0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE | 0x1f}, /* 0dB */
 	{ }
@@ -2483,10 +2504,6 @@
 	{0x0c, AC_VERB_SET_CONNECT_SEL, 0x1},
 	{0x0d, AC_VERB_SET_CONNECT_SEL, 0x1},
 	{0x0e, AC_VERB_SET_CONNECT_SEL, 0x1},
-	/* ADCs; muted */
-	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
 	/* Analog Mix output amp */
 	{0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE | 0x1f}, /* 0dB */
 	{ }
@@ -2890,7 +2907,7 @@
 
 	spec->multiout.max_channels = spec->multiout.num_dacs * 2;
 
-	if (spec->autocfg.dig_out_pin)
+	if (spec->autocfg.dig_outs)
 		spec->multiout.dig_out_nid = AD1988_SPDIF_OUT;
 	if (spec->autocfg.dig_in_pin)
 		spec->dig_in_nid = AD1988_SPDIF_IN;
@@ -2940,7 +2957,7 @@
 static int patch_ad1988(struct hda_codec *codec)
 {
 	struct ad198x_spec *spec;
-	int board_config;
+	int err, board_config;
 
 	spec = kzalloc(sizeof(*spec), GFP_KERNEL);
 	if (spec == NULL)
@@ -2960,7 +2977,7 @@
 
 	if (board_config == AD1988_AUTO) {
 		/* automatic parse from the BIOS config */
-		int err = ad1988_parse_auto_config(codec);
+		err = ad1988_parse_auto_config(codec);
 		if (err < 0) {
 			ad198x_free(codec);
 			return err;
@@ -2970,6 +2987,13 @@
 		}
 	}
 
+	err = snd_hda_attach_beep_device(codec, 0x10);
+	if (err < 0) {
+		ad198x_free(codec);
+		return err;
+	}
+	set_beep_amp(spec, 0x10, 0, HDA_OUTPUT);
+
 	switch (board_config) {
 	case AD1988_6STACK:
 	case AD1988_6STACK_DIG:
@@ -3126,12 +3150,6 @@
 	HDA_CODEC_MUTE("Mic Playback Switch", 0x20, 0x01, HDA_INPUT),
 	HDA_CODEC_VOLUME("CD Playback Volume", 0x20, 0x02, HDA_INPUT),
 	HDA_CODEC_MUTE("CD Playback Switch", 0x20, 0x02, HDA_INPUT),
-	/*
-	HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x20, 0x03, HDA_INPUT),
-	HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x20, 0x03, HDA_INPUT),
-	HDA_CODEC_VOLUME("Digital Beep Playback Volume", 0x10, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Digital Beep Playback Switch", 0x10, 0x0, HDA_OUTPUT),
-	*/
 	HDA_CODEC_VOLUME("Mic Boost", 0x15, 0x0, HDA_INPUT),
 	HDA_CODEC_VOLUME("Front Mic Boost", 0x14, 0x0, HDA_INPUT),
 	HDA_CODEC_VOLUME("Capture Volume", 0x0c, 0x0, HDA_OUTPUT),
@@ -3204,10 +3222,10 @@
 	{0x0e, AC_VERB_SET_CONNECT_SEL, 0x1},
 	/* Port-B (front mic) pin */
 	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
 	/* Port-C (rear mic) pin */
 	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
 	/* Analog mixer; mute as default */
 	{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
 	{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
@@ -3240,7 +3258,7 @@
 	"CD Playback Volume",
 	"Internal Mic Playback Volume",
 	"Docking Mic Playback Volume"
-	"Beep Playback Volume",
+	/* "Beep Playback Volume", */
 	"IEC958 Playback Volume",
 	NULL
 };
@@ -3248,6 +3266,7 @@
 static int patch_ad1884(struct hda_codec *codec)
 {
 	struct ad198x_spec *spec;
+	int err;
 
 	spec = kzalloc(sizeof(*spec), GFP_KERNEL);
 	if (spec == NULL)
@@ -3255,6 +3274,13 @@
 
 	codec->spec = spec;
 
+	err = snd_hda_attach_beep_device(codec, 0x10);
+	if (err < 0) {
+		ad198x_free(codec);
+		return err;
+	}
+	set_beep_amp(spec, 0x10, 0, HDA_OUTPUT);
+
 	spec->multiout.max_channels = 2;
 	spec->multiout.num_dacs = ARRAY_SIZE(ad1884_dac_nids);
 	spec->multiout.dac_nids = ad1884_dac_nids;
@@ -3321,8 +3347,6 @@
 	HDA_CODEC_VOLUME("Mic Boost", 0x14, 0x0, HDA_INPUT),
 	HDA_CODEC_VOLUME("Internal Mic Boost", 0x15, 0x0, HDA_INPUT),
 	HDA_CODEC_VOLUME("Docking Mic Boost", 0x25, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME("Beep Playback Volume", 0x20, 0x03, HDA_INPUT),
-	HDA_CODEC_MUTE("Beep Playback Switch", 0x20, 0x03, HDA_INPUT),
 	HDA_CODEC_VOLUME("Capture Volume", 0x0c, 0x0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Capture Switch", 0x0c, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x0d, 0x0, HDA_OUTPUT),
@@ -3358,7 +3382,7 @@
 	{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
 	{0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
 	/* docking mic boost */
-	{0x25, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+	{0x25, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
 	/* Analog mixer - docking mic; mute as default */
 	{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
 	/* enable EAPD bit */
@@ -3379,10 +3403,6 @@
 	HDA_CODEC_MUTE("Front Mic Playback Switch", 0x20, 0x00, HDA_INPUT),
 	HDA_CODEC_VOLUME("Line-In Playback Volume", 0x20, 0x01, HDA_INPUT),
 	HDA_CODEC_MUTE("Line-In Playback Switch", 0x20, 0x01, HDA_INPUT),
-	/*
-	HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x20, 0x03, HDA_INPUT),
-	HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x20, 0x03, HDA_INPUT),
-	*/
 	HDA_CODEC_VOLUME("Line-In Boost", 0x15, 0x0, HDA_INPUT),
 	HDA_CODEC_VOLUME("Front Mic Boost", 0x14, 0x0, HDA_INPUT),
 	HDA_CODEC_VOLUME("Capture Volume", 0x0c, 0x0, HDA_OUTPUT),
@@ -3468,7 +3488,7 @@
 
 static struct snd_pci_quirk ad1984_cfg_tbl[] = {
 	/* Lenovo Thinkpad T61/X61 */
-	SND_PCI_QUIRK(0x17aa, 0, "Lenovo Thinkpad", AD1984_THINKPAD),
+	SND_PCI_QUIRK_VENDOR(0x17aa, "Lenovo Thinkpad", AD1984_THINKPAD),
 	SND_PCI_QUIRK(0x1028, 0x0214, "Dell T3400", AD1984_DELL_DESKTOP),
 	{}
 };
@@ -3561,8 +3581,6 @@
 	HDA_CODEC_MUTE("Mic Playback Switch", 0x20, 0x04, HDA_INPUT),
 	HDA_CODEC_VOLUME("CD Playback Volume", 0x20, 0x02, HDA_INPUT),
 	HDA_CODEC_MUTE("CD Playback Switch", 0x20, 0x02, HDA_INPUT),
-	HDA_CODEC_VOLUME("Beep Playback Volume", 0x20, 0x03, HDA_INPUT),
-	HDA_CODEC_MUTE("Beep Playback Switch", 0x20, 0x03, HDA_INPUT),
 	HDA_CODEC_VOLUME("Front Mic Boost", 0x14, 0x0, HDA_INPUT),
 	HDA_CODEC_VOLUME("Line Boost", 0x15, 0x0, HDA_INPUT),
 	HDA_CODEC_VOLUME("Mic Boost", 0x25, 0x0, HDA_OUTPUT),
@@ -3622,10 +3640,10 @@
 	{0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
 	/* Port-B (front mic) pin */
 	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
 	/* Port-C (rear line-in) pin */
 	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
 	/* Port-E (rear mic) pin */
 	{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
 	{0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
@@ -3695,8 +3713,6 @@
 	HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x20, 0x01, HDA_INPUT),
 	HDA_CODEC_VOLUME("Dock Mic Playback Volume", 0x20, 0x04, HDA_INPUT),
 	HDA_CODEC_MUTE("Dock Mic Playback Switch", 0x20, 0x04, HDA_INPUT),
-	HDA_CODEC_VOLUME("Beep Playback Volume", 0x20, 0x03, HDA_INPUT),
-	HDA_CODEC_MUTE("Beep Playback Switch", 0x20, 0x03, HDA_INPUT),
 	HDA_CODEC_VOLUME("Mic Boost", 0x14, 0x0, HDA_INPUT),
 	HDA_CODEC_VOLUME("Internal Mic Boost", 0x15, 0x0, HDA_INPUT),
 	HDA_CODEC_VOLUME("Dock Mic Boost", 0x25, 0x0, HDA_OUTPUT),
@@ -3724,8 +3740,6 @@
 	HDA_CODEC_MUTE("Master Playback Switch", 0x21, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME("PCM Playback Volume", 0x20, 0x5, HDA_INPUT),
 	HDA_CODEC_MUTE("PCM Playback Switch", 0x20, 0x5, HDA_INPUT),
-	HDA_CODEC_VOLUME("Beep Playback Volume", 0x20, 0x03, HDA_INPUT),
-	HDA_CODEC_MUTE("Beep Playback Switch", 0x20, 0x03, HDA_INPUT),
 	HDA_CODEC_VOLUME("Mic Capture Volume", 0x14, 0x0, HDA_INPUT),
 	HDA_CODEC_VOLUME("Internal Mic Capture Volume", 0x15, 0x0, HDA_INPUT),
 	HDA_CODEC_VOLUME("Capture Volume", 0x0c, 0x0, HDA_OUTPUT),
@@ -3836,8 +3850,6 @@
 	HDA_CODEC_MUTE("PCM Playback Switch", 0x20, 0x5, HDA_INPUT),
 	HDA_CODEC_VOLUME("Mic Playback Volume", 0x20, 0x00, HDA_INPUT),
 	HDA_CODEC_MUTE("Mic Playback Switch", 0x20, 0x00, HDA_INPUT),
-	HDA_CODEC_VOLUME("Beep Playback Volume", 0x20, 0x03, HDA_INPUT),
-	HDA_CODEC_MUTE("Beep Playback Switch", 0x20, 0x03, HDA_INPUT),
 	HDA_CODEC_VOLUME("Mic Boost", 0x14, 0x0, HDA_INPUT),
 	HDA_CODEC_VOLUME("Internal Mic Boost", 0x17, 0x0, HDA_INPUT),
 	HDA_CODEC_VOLUME("Capture Volume", 0x0c, 0x0, HDA_OUTPUT),
@@ -3911,6 +3923,8 @@
 	SND_PCI_QUIRK(0x103c, 0x3030, "HP", AD1884A_MOBILE),
 	SND_PCI_QUIRK(0x103c, 0x3037, "HP 2230s", AD1884A_LAPTOP),
 	SND_PCI_QUIRK(0x103c, 0x3056, "HP", AD1884A_MOBILE),
+	SND_PCI_QUIRK(0x103c, 0x3072, "HP", AD1884A_LAPTOP),
+	SND_PCI_QUIRK(0x103c, 0x3077, "HP", AD1884A_LAPTOP),
 	SND_PCI_QUIRK(0x103c, 0x30e6, "HP 6730b", AD1884A_LAPTOP),
 	SND_PCI_QUIRK(0x103c, 0x30e7, "HP EliteBook 8530p", AD1884A_LAPTOP),
 	SND_PCI_QUIRK(0x103c, 0x3614, "HP 6730s", AD1884A_LAPTOP),
@@ -3921,7 +3935,7 @@
 static int patch_ad1884a(struct hda_codec *codec)
 {
 	struct ad198x_spec *spec;
-	int board_config;
+	int err, board_config;
 
 	spec = kzalloc(sizeof(*spec), GFP_KERNEL);
 	if (spec == NULL)
@@ -3929,6 +3943,13 @@
 
 	codec->spec = spec;
 
+	err = snd_hda_attach_beep_device(codec, 0x10);
+	if (err < 0) {
+		ad198x_free(codec);
+		return err;
+	}
+	set_beep_amp(spec, 0x10, 0, HDA_OUTPUT);
+
 	spec->multiout.max_channels = 2;
 	spec->multiout.num_dacs = ARRAY_SIZE(ad1884a_dac_nids);
 	spec->multiout.dac_nids = ad1884a_dac_nids;
@@ -4083,8 +4104,6 @@
 	HDA_CODEC_MUTE("Line Playback Switch", 0x20, 0x04, HDA_INPUT),
 	HDA_CODEC_VOLUME("CD Playback Volume", 0x20, 0x06, HDA_INPUT),
 	HDA_CODEC_MUTE("CD Playback Switch", 0x20, 0x06, HDA_INPUT),
-	HDA_CODEC_VOLUME("Beep Playback Volume", 0x20, 0x07, HDA_INPUT),
-	HDA_CODEC_MUTE("Beep Playback Switch", 0x20, 0x07, HDA_INPUT),
 	{ } /* end */
 };
 
@@ -4097,8 +4116,6 @@
 	HDA_CODEC_MUTE("Line Playback Switch", 0x20, 0x01, HDA_INPUT),
 	HDA_CODEC_VOLUME("CD Playback Volume", 0x20, 0x06, HDA_INPUT),
 	HDA_CODEC_MUTE("CD Playback Switch", 0x20, 0x06, HDA_INPUT),
-	HDA_CODEC_VOLUME("Beep Playback Volume", 0x20, 0x07, HDA_INPUT),
-	HDA_CODEC_MUTE("Beep Playback Switch", 0x20, 0x07, HDA_INPUT),
 	HDA_CODEC_VOLUME("Digital Mic Boost", 0x1f, 0x0, HDA_INPUT),
 	{ } /* end */
 };
@@ -4257,7 +4274,7 @@
 static int patch_ad1882(struct hda_codec *codec)
 {
 	struct ad198x_spec *spec;
-	int board_config;
+	int err, board_config;
 
 	spec = kzalloc(sizeof(*spec), GFP_KERNEL);
 	if (spec == NULL)
@@ -4265,6 +4282,13 @@
 
 	codec->spec = spec;
 
+	err = snd_hda_attach_beep_device(codec, 0x10);
+	if (err < 0) {
+		ad198x_free(codec);
+		return err;
+	}
+	set_beep_amp(spec, 0x10, 0, HDA_OUTPUT);
+
 	spec->multiout.max_channels = 6;
 	spec->multiout.num_dacs = 3;
 	spec->multiout.dac_nids = ad1882_dac_nids;
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 0177ef8..b8de73ec 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -1002,15 +1002,9 @@
 };
 
 static struct snd_pci_quirk cxt5045_cfg_tbl[] = {
-	SND_PCI_QUIRK(0x103c, 0x30a5, "HP", CXT5045_LAPTOP_HPSENSE),
-	SND_PCI_QUIRK(0x103c, 0x30b2, "HP DV Series", CXT5045_LAPTOP_HPSENSE),
-	SND_PCI_QUIRK(0x103c, 0x30b5, "HP DV2120", CXT5045_LAPTOP_HPSENSE),
-	SND_PCI_QUIRK(0x103c, 0x30b7, "HP DV6000Z", CXT5045_LAPTOP_HPSENSE),
-	SND_PCI_QUIRK(0x103c, 0x30bb, "HP DV8000", CXT5045_LAPTOP_HPSENSE),
-	SND_PCI_QUIRK(0x103c, 0x30cd, "HP DV Series", CXT5045_LAPTOP_HPSENSE),
-	SND_PCI_QUIRK(0x103c, 0x30cf, "HP DV9533EG", CXT5045_LAPTOP_HPSENSE),
 	SND_PCI_QUIRK(0x103c, 0x30d5, "HP 530", CXT5045_LAPTOP_HP530),
-	SND_PCI_QUIRK(0x103c, 0x30d9, "HP Spartan", CXT5045_LAPTOP_HPSENSE),
+	SND_PCI_QUIRK_MASK(0x103c, 0xff00, 0x3000, "HP DV Series",
+			   CXT5045_LAPTOP_HPSENSE),
 	SND_PCI_QUIRK(0x1179, 0xff31, "Toshiba P105", CXT5045_LAPTOP_MICSENSE),
 	SND_PCI_QUIRK(0x152d, 0x0753, "Benq R55E", CXT5045_BENQ),
 	SND_PCI_QUIRK(0x1734, 0x10ad, "Fujitsu Si1520", CXT5045_LAPTOP_MICSENSE),
@@ -1020,8 +1014,8 @@
 	SND_PCI_QUIRK(0x1509, 0x1e40, "FIC", CXT5045_LAPTOP_HPMICSENSE),
 	SND_PCI_QUIRK(0x1509, 0x2f05, "FIC", CXT5045_LAPTOP_HPMICSENSE),
 	SND_PCI_QUIRK(0x1509, 0x2f06, "FIC", CXT5045_LAPTOP_HPMICSENSE),
-	SND_PCI_QUIRK(0x1631, 0xc106, "Packard Bell", CXT5045_LAPTOP_HPMICSENSE),
-	SND_PCI_QUIRK(0x1631, 0xc107, "Packard Bell", CXT5045_LAPTOP_HPMICSENSE),
+	SND_PCI_QUIRK_MASK(0x1631, 0xff00, 0xc100, "Packard Bell",
+			   CXT5045_LAPTOP_HPMICSENSE),
 	SND_PCI_QUIRK(0x8086, 0x2111, "Conexant Reference board", CXT5045_LAPTOP_HPSENSE),
 	{}
 };
@@ -1571,11 +1565,9 @@
 };
 
 static struct snd_pci_quirk cxt5047_cfg_tbl[] = {
-	SND_PCI_QUIRK(0x103c, 0x30a0, "HP DV1000", CXT5047_LAPTOP),
 	SND_PCI_QUIRK(0x103c, 0x30a5, "HP DV5200T/DV8000T", CXT5047_LAPTOP_HP),
-	SND_PCI_QUIRK(0x103c, 0x30b2, "HP DV2000T/DV3000T", CXT5047_LAPTOP),
-	SND_PCI_QUIRK(0x103c, 0x30b5, "HP DV2000Z", CXT5047_LAPTOP),
-	SND_PCI_QUIRK(0x103c, 0x30cf, "HP DV6700", CXT5047_LAPTOP),
+	SND_PCI_QUIRK_MASK(0x103c, 0xff00, 0x3000, "HP DV Series",
+			   CXT5047_LAPTOP),
 	SND_PCI_QUIRK(0x1179, 0xff31, "Toshiba P100", CXT5047_LAPTOP_EAPD),
 	{}
 };
@@ -1806,6 +1798,40 @@
 	{ } /* end */
 };
 
+static struct hda_verb cxt5051_lenovo_x200_init_verbs[] = {
+	/* Line in, Mic */
+	{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0) | 0x03},
+	{0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0) | 0x03},
+	{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+	{0x1d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	{0x1d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0) | 0x03},
+	/* SPK  */
+	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x1a, AC_VERB_SET_CONNECT_SEL, 0x00},
+	/* HP, Amp  */
+	{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+	{0x16, AC_VERB_SET_CONNECT_SEL, 0x00},
+	/* Docking HP */
+	{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+	{0x19, AC_VERB_SET_CONNECT_SEL, 0x00},
+	/* DAC1 */
+	{0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	/* Record selector: Int mic */
+	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0) | 0x44},
+	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1) | 0x44},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0) | 0x44},
+	/* SPDIF route: PCM */
+	{0x1c, AC_VERB_SET_CONNECT_SEL, 0x0},
+	/* EAPD */
+	{0x1a, AC_VERB_SET_EAPD_BTLENABLE, 0x2}, /* default on */
+	{0x16, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN|CONEXANT_HP_EVENT},
+	{0x17, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN|CXT5051_PORTB_EVENT},
+	{0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN|CXT5051_PORTC_EVENT},
+	{0x19, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN|CONEXANT_HP_EVENT},
+	{ } /* end */
+};
+
 /* initialize jack-sensing, too */
 static int cxt5051_init(struct hda_codec *codec)
 {
@@ -1823,18 +1849,21 @@
 enum {
 	CXT5051_LAPTOP,	 /* Laptops w/ EAPD support */
 	CXT5051_HP,	/* no docking */
+	CXT5051_LENOVO_X200,	/* Lenovo X200 laptop */
 	CXT5051_MODELS
 };
 
 static const char *cxt5051_models[CXT5051_MODELS] = {
 	[CXT5051_LAPTOP]	= "laptop",
 	[CXT5051_HP]		= "hp",
+	[CXT5051_LENOVO_X200]	= "lenovo-x200",
 };
 
 static struct snd_pci_quirk cxt5051_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x14f1, 0x0101, "Conexant Reference board",
 		      CXT5051_LAPTOP),
 	SND_PCI_QUIRK(0x14f1, 0x5051, "HP Spartan 1.1", CXT5051_HP),
+	SND_PCI_QUIRK(0x17aa, 0x20f2, "Lenovo X200", CXT5051_LENOVO_X200),
 	{}
 };
 
@@ -1875,6 +1904,9 @@
 		codec->patch_ops.unsol_event = cxt5051_hp_unsol_event;
 		spec->mixers[0] = cxt5051_hp_mixers;
 		break;
+	case CXT5051_LENOVO_X200:
+		spec->init_verbs[0] = cxt5051_lenovo_x200_init_verbs;
+		/* fallthru */
 	default:
 	case CXT5051_LAPTOP:
 		codec->patch_ops.unsol_event = cxt5051_hp_unsol_event;
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index ed8fcbd..2306cca 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -30,6 +30,7 @@
 #include <sound/core.h>
 #include "hda_codec.h"
 #include "hda_local.h"
+#include "hda_beep.h"
 
 #define ALC880_FRONT_EVENT		0x01
 #define ALC880_DCVOL_EVENT		0x02
@@ -103,6 +104,7 @@
 	ALC262_NEC,
 	ALC262_TOSHIBA_S06,
 	ALC262_TOSHIBA_RX1,
+	ALC262_TYAN,
 	ALC262_AUTO,
 	ALC262_MODEL_LAST /* last tag */
 };
@@ -238,6 +240,13 @@
 	ALC883_MODEL_LAST,
 };
 
+/* styles of capture selection */
+enum {
+	CAPT_MUX = 0,	/* only mux based */
+	CAPT_MIX,	/* only mixer based */
+	CAPT_1MUX_MIX,	/* first mux and other mixers */
+};
+
 /* for GPIO Poll */
 #define GPIO_MASK	0x03
 
@@ -246,6 +255,7 @@
 	struct snd_kcontrol_new *mixers[5];	/* mixer arrays */
 	unsigned int num_mixers;
 	struct snd_kcontrol_new *cap_mixer;	/* capture mixer */
+	unsigned int beep_amp;	/* beep amp value, set via set_beep_amp() */
 
 	const struct hda_verb *init_verbs[5];	/* initialization verbs
 						 * don't forget NULL
@@ -269,13 +279,14 @@
 					 * dig_out_nid and hp_nid are optional
 					 */
 	hda_nid_t alt_dac_nid;
+	int dig_out_type;
 
 	/* capture */
 	unsigned int num_adc_nids;
 	hda_nid_t *adc_nids;
 	hda_nid_t *capsrc_nids;
 	hda_nid_t dig_in_nid;		/* digital-in NID; optional */
-	unsigned char is_mix_capture;	/* matrix-style capture (non-mux) */
+	int capture_style;		/* capture style (CAPT_*) */
 
 	/* capture source */
 	unsigned int num_mux_defs;
@@ -293,7 +304,7 @@
 	/* dynamic controls, init_verbs and input_mux */
 	struct auto_pin_cfg autocfg;
 	struct snd_array kctls;
-	struct hda_input_mux private_imux;
+	struct hda_input_mux private_imux[3];
 	hda_nid_t private_dac_nids[AUTO_CFG_MAX_OUTS];
 
 	/* hooks */
@@ -305,6 +316,9 @@
 	unsigned int jack_present: 1;
 	unsigned int master_sw: 1;
 
+	/* other flags */
+	unsigned int no_analog :1; /* digital I/O only */
+
 	/* for virtual master */
 	hda_nid_t vmaster_nid;
 #ifdef CONFIG_SND_HDA_POWER_SAVE
@@ -336,6 +350,7 @@
 	hda_nid_t *dac_nids;
 	hda_nid_t dig_out_nid;		/* optional */
 	hda_nid_t hp_nid;		/* optional */
+	hda_nid_t *slave_dig_outs;
 	unsigned int num_adc_nids;
 	hda_nid_t *adc_nids;
 	hda_nid_t *capsrc_nids;
@@ -392,7 +407,8 @@
 	mux_idx = adc_idx >= spec->num_mux_defs ? 0 : adc_idx;
 	imux = &spec->input_mux[mux_idx];
 
-	if (spec->is_mix_capture) {
+	if (spec->capture_style &&
+	    !(spec->capture_style == CAPT_1MUX_MIX && !adc_idx)) {
 		/* Matrix-mixer style (e.g. ALC882) */
 		unsigned int *cur_val = &spec->cur_mux[adc_idx];
 		unsigned int i, idx;
@@ -810,6 +826,7 @@
 	spec->multiout.num_dacs = preset->num_dacs;
 	spec->multiout.dac_nids = preset->dac_nids;
 	spec->multiout.dig_out_nid = preset->dig_out_nid;
+	spec->multiout.slave_dig_outs = preset->slave_dig_outs;
 	spec->multiout.hp_nid = preset->hp_nid;
 
 	spec->num_mux_defs = preset->num_mux_defs;
@@ -921,7 +938,7 @@
 			 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
 }
 #else
-#define alc_mic_automute(codec) /* NOP */
+#define alc_mic_automute(codec) do {} while(0) /* NOP */
 #endif /* disabled */
 
 /* unsolicited event for HP jack sensing */
@@ -1375,8 +1392,6 @@
 	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
 	HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
 	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
-	HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
-	HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
 	{ } /* end */
 };
 
@@ -1483,8 +1498,6 @@
 	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
 	HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x3, HDA_INPUT),
 	HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x3, HDA_INPUT),
-	HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
-	HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
 	HDA_CODEC_MUTE("Headphone Playback Switch", 0x19, 0x0, HDA_OUTPUT),
 	{
 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
@@ -1706,8 +1719,6 @@
 	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
 	HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
 	HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
-	HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
-	HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
 	{
 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 		.name = "Channel Mode",
@@ -1884,13 +1895,6 @@
 	{ } /* end */
 };
 
-/* additional mixers to alc880_asus_mixer */
-static struct snd_kcontrol_new alc880_pcbeep_mixer[] = {
-	HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
-	HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
-	{ } /* end */
-};
-
 /* TCL S700 */
 static struct snd_kcontrol_new alc880_tcl_s700_mixer[] = {
 	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
@@ -1923,8 +1927,6 @@
 	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
 	HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
 	HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
-	HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
-	HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
 	{
 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 		.name = "Channel Mode",
@@ -1999,6 +2001,13 @@
 
 static void alc_free_kctls(struct hda_codec *codec);
 
+/* additional beep mixers; the actual parameters are overwritten at build */
+static struct snd_kcontrol_new alc_beep_mixer[] = {
+	HDA_CODEC_VOLUME("Beep Playback Volume", 0, 0, HDA_INPUT),
+	HDA_CODEC_MUTE("Beep Playback Switch", 0, 0, HDA_INPUT),
+	{ } /* end */
+};
+
 static int alc_build_controls(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
@@ -2020,11 +2029,13 @@
 						    spec->multiout.dig_out_nid);
 		if (err < 0)
 			return err;
-		err = snd_hda_create_spdif_share_sw(codec,
-						    &spec->multiout);
-		if (err < 0)
-			return err;
-		spec->multiout.share_spdif = 1;
+		if (!spec->no_analog) {
+			err = snd_hda_create_spdif_share_sw(codec,
+							    &spec->multiout);
+			if (err < 0)
+				return err;
+			spec->multiout.share_spdif = 1;
+		}
 	}
 	if (spec->dig_in_nid) {
 		err = snd_hda_create_spdif_in_ctls(codec, spec->dig_in_nid);
@@ -2032,8 +2043,24 @@
 			return err;
 	}
 
+	/* create beep controls if needed */
+	if (spec->beep_amp) {
+		struct snd_kcontrol_new *knew;
+		for (knew = alc_beep_mixer; knew->name; knew++) {
+			struct snd_kcontrol *kctl;
+			kctl = snd_ctl_new1(knew, codec);
+			if (!kctl)
+				return -ENOMEM;
+			kctl->private_value = spec->beep_amp;
+			err = snd_hda_ctl_add(codec, kctl);
+			if (err < 0)
+				return err;
+		}
+	}
+
 	/* if we have no master control, let's create it */
-	if (!snd_hda_find_mixer_ctl(codec, "Master Playback Volume")) {
+	if (!spec->no_analog &&
+	    !snd_hda_find_mixer_ctl(codec, "Master Playback Volume")) {
 		unsigned int vmaster_tlv[4];
 		snd_hda_set_vmaster_tlv(codec, spec->vmaster_nid,
 					HDA_OUTPUT, vmaster_tlv);
@@ -2042,7 +2069,8 @@
 		if (err < 0)
 			return err;
 	}
-	if (!snd_hda_find_mixer_ctl(codec, "Master Playback Switch")) {
+	if (!spec->no_analog &&
+	    !snd_hda_find_mixer_ctl(codec, "Master Playback Switch")) {
 		err = snd_hda_add_vmaster(codec, "Master Playback Switch",
 					  NULL, alc_slave_sws);
 		if (err < 0)
@@ -3061,6 +3089,9 @@
 	codec->num_pcms = 1;
 	codec->pcm_info = info;
 
+	if (spec->no_analog)
+		goto skip_analog;
+
 	info->name = spec->stream_name_analog;
 	if (spec->stream_analog_playback) {
 		if (snd_BUG_ON(!spec->multiout.dac_nids))
@@ -3084,12 +3115,17 @@
 		}
 	}
 
+ skip_analog:
 	/* SPDIF for stream index #1 */
 	if (spec->multiout.dig_out_nid || spec->dig_in_nid) {
 		codec->num_pcms = 2;
+	        codec->slave_dig_outs = spec->multiout.slave_dig_outs;
 		info = spec->pcm_rec + 1;
 		info->name = spec->stream_name_digital;
-		info->pcm_type = HDA_PCM_TYPE_SPDIF;
+		if (spec->dig_out_type)
+			info->pcm_type = spec->dig_out_type;
+		else
+			info->pcm_type = HDA_PCM_TYPE_SPDIF;
 		if (spec->multiout.dig_out_nid &&
 		    spec->stream_digital_playback) {
 			info->stream[SNDRV_PCM_STREAM_PLAYBACK] = *(spec->stream_digital_playback);
@@ -3104,6 +3140,9 @@
 		codec->spdif_status_reset = 1;
 	}
 
+	if (spec->no_analog)
+		return 0;
+
 	/* If the use of more than one ADC is requested for the current
 	 * model, configure a second analog capture-only PCM.
 	 */
@@ -3162,7 +3201,7 @@
 
 	alc_free_kctls(codec);
 	kfree(spec);
-	codec->spec = NULL; /* to be sure */
+	snd_hda_detach_beep_device(codec);
 }
 
 #ifdef SND_HDA_NEEDS_RESUME
@@ -3559,7 +3598,7 @@
 	SND_PCI_QUIRK(0x1043, 0x8181, "ASUS P4GPL", ALC880_ASUS_DIG),
 	SND_PCI_QUIRK(0x1043, 0x8196, "ASUS P5GD1", ALC880_6ST),
 	SND_PCI_QUIRK(0x1043, 0x81b4, "ASUS", ALC880_6ST),
-	SND_PCI_QUIRK(0x1043, 0, "ASUS", ALC880_ASUS), /* default ASUS */
+	SND_PCI_QUIRK_VENDOR(0x1043, "ASUS", ALC880_ASUS), /* default ASUS */
 	SND_PCI_QUIRK(0x104d, 0x81a0, "Sony", ALC880_3ST),
 	SND_PCI_QUIRK(0x104d, 0x81d6, "Sony", ALC880_3ST),
 	SND_PCI_QUIRK(0x107b, 0x3032, "Gateway", ALC880_5ST),
@@ -3602,7 +3641,8 @@
 	SND_PCI_QUIRK(0x8086, 0xe400, "Intel mobo", ALC880_5ST_DIG),
 	SND_PCI_QUIRK(0x8086, 0xe401, "Intel mobo", ALC880_5ST_DIG),
 	SND_PCI_QUIRK(0x8086, 0xe402, "Intel mobo", ALC880_5ST_DIG),
-	SND_PCI_QUIRK(0x8086, 0, "Intel mobo", ALC880_3ST), /* default Intel */
+	/* default Intel */
+	SND_PCI_QUIRK_VENDOR(0x8086, "Intel mobo", ALC880_3ST),
 	SND_PCI_QUIRK(0xa0a0, 0x0560, "AOpen i915GMm-HFS", ALC880_5ST_DIG),
 	SND_PCI_QUIRK(0xe803, 0x1019, NULL, ALC880_6ST_DIG),
 	{}
@@ -3782,7 +3822,7 @@
 		.input_mux = &alc880_capture_source,
 	},
 	[ALC880_UNIWILL_DIG] = {
-		.mixers = { alc880_asus_mixer, alc880_pcbeep_mixer },
+		.mixers = { alc880_asus_mixer },
 		.init_verbs = { alc880_volume_init_verbs,
 				alc880_pin_asus_init_verbs },
 		.num_dacs = ARRAY_SIZE(alc880_asus_dac_nids),
@@ -3820,8 +3860,7 @@
 		.init_hook = alc880_uniwill_p53_hp_automute,
 	},
 	[ALC880_FUJITSU] = {
-		.mixers = { alc880_fujitsu_mixer,
-			    alc880_pcbeep_mixer, },
+		.mixers = { alc880_fujitsu_mixer },
 		.init_verbs = { alc880_volume_init_verbs,
 				alc880_uniwill_p53_init_verbs,
 	       			alc880_beep_init_verbs },
@@ -4114,7 +4153,7 @@
 static int alc880_auto_create_analog_input_ctls(struct alc_spec *spec,
 						const struct auto_pin_cfg *cfg)
 {
-	struct hda_input_mux *imux = &spec->private_imux;
+	struct hda_input_mux *imux = &spec->private_imux[0];
 	int i, err, idx;
 
 	for (i = 0; i < AUTO_PIN_LAST; i++) {
@@ -4252,7 +4291,7 @@
 
 	spec->multiout.max_channels = spec->multiout.num_dacs * 2;
 
-	if (spec->autocfg.dig_out_pin)
+	if (spec->autocfg.dig_outs)
 		spec->multiout.dig_out_nid = ALC880_DIGOUT_NID;
 	if (spec->autocfg.dig_in_pin)
 		spec->dig_in_nid = ALC880_DIGIN_NID;
@@ -4263,7 +4302,7 @@
 	add_verb(spec, alc880_volume_init_verbs);
 
 	spec->num_mux_defs = 1;
-	spec->input_mux = &spec->private_imux;
+	spec->input_mux = &spec->private_imux[0];
 
 	store_pin_configs(codec);
 	return 1;
@@ -4280,10 +4319,6 @@
 		alc_inithook(codec);
 }
 
-/*
- * OK, here we have finally the patch for ALC880
- */
-
 static void set_capture_mixer(struct alc_spec *spec)
 {
 	static struct snd_kcontrol_new *caps[3] = {
@@ -4295,6 +4330,13 @@
 		spec->cap_mixer = caps[spec->num_adc_nids - 1];
 }
 
+#define set_beep_amp(spec, nid, idx, dir) \
+	((spec)->beep_amp = HDA_COMPOSE_AMP_VAL(nid, 3, idx, dir))
+
+/*
+ * OK, here we have finally the patch for ALC880
+ */
+
 static int patch_alc880(struct hda_codec *codec)
 {
 	struct alc_spec *spec;
@@ -4330,6 +4372,12 @@
 		}
 	}
 
+	err = snd_hda_attach_beep_device(codec, 0x1);
+	if (err < 0) {
+		alc_free(codec);
+		return err;
+	}
+
 	if (board_config != ALC880_AUTO)
 		setup_preset(spec, &alc880_presets[board_config]);
 
@@ -4356,6 +4404,7 @@
 		}
 	}
 	set_capture_mixer(spec);
+	set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
 
 	spec->vmaster_nid = 0x0c;
 
@@ -4505,12 +4554,6 @@
 	{ } /* end */
 };
 
-static struct snd_kcontrol_new alc260_pc_beep_mixer[] = {
-	HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x07, 0x05, HDA_INPUT),
-	HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x07, 0x05, HDA_INPUT),
-	{ } /* end */
-};
-
 /* update HP, line and mono out pins according to the master switch */
 static void alc260_hp_master_update(struct hda_codec *codec,
 				    hda_nid_t hp, hda_nid_t line,
@@ -4702,8 +4745,6 @@
 	HDA_CODEC_VOLUME("Mic/Line Playback Volume", 0x07, 0x0, HDA_INPUT),
 	HDA_CODEC_MUTE("Mic/Line Playback Switch", 0x07, 0x0, HDA_INPUT),
 	ALC_PIN_MODE("Mic/Line Jack Mode", 0x12, ALC_PIN_DIR_IN),
-	HDA_CODEC_VOLUME("Beep Playback Volume", 0x07, 0x05, HDA_INPUT),
-	HDA_CODEC_MUTE("Beep Playback Switch", 0x07, 0x05, HDA_INPUT),
 	HDA_CODEC_VOLUME("Speaker Playback Volume", 0x09, 0x0, HDA_OUTPUT),
 	HDA_BIND_MUTE("Speaker Playback Switch", 0x09, 2, HDA_INPUT),
 	{ } /* end */
@@ -4748,8 +4789,6 @@
 	HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
 	HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
 	ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
-	HDA_CODEC_VOLUME("Beep Playback Volume", 0x07, 0x05, HDA_INPUT),
-	HDA_CODEC_MUTE("Beep Playback Switch", 0x07, 0x05, HDA_INPUT),
 	{ } /* end */
 };
 
@@ -4767,8 +4806,6 @@
 	ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
 	HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
 	HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
-	HDA_CODEC_VOLUME("Beep Playback Volume", 0x07, 0x05, HDA_INPUT),
-	HDA_CODEC_MUTE("Beep Playback Switch", 0x07, 0x05, HDA_INPUT),
 	{ } /* end */
 };
 
@@ -5272,8 +5309,6 @@
 	HDA_CODEC_MUTE("LINE2 Playback Switch", 0x07, 0x03, HDA_INPUT),
 	HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
 	HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
-	HDA_CODEC_VOLUME("Beep Playback Volume", 0x07, 0x05, HDA_INPUT),
-	HDA_CODEC_MUTE("Beep Playback Switch", 0x07, 0x05, HDA_INPUT),
 	HDA_CODEC_VOLUME("LINE-OUT loopback Playback Volume", 0x07, 0x06, HDA_INPUT),
 	HDA_CODEC_MUTE("LINE-OUT loopback Playback Switch", 0x07, 0x06, HDA_INPUT),
 	HDA_CODEC_VOLUME("HP-OUT loopback Playback Volume", 0x07, 0x7, HDA_INPUT),
@@ -5471,7 +5506,7 @@
 static int alc260_auto_create_analog_input_ctls(struct alc_spec *spec,
 						const struct auto_pin_cfg *cfg)
 {
-	struct hda_input_mux *imux = &spec->private_imux;
+	struct hda_input_mux *imux = &spec->private_imux[0];
 	int i, err, idx;
 
 	for (i = 0; i < AUTO_PIN_LAST; i++) {
@@ -5623,7 +5658,7 @@
 
 	spec->multiout.max_channels = 2;
 
-	if (spec->autocfg.dig_out_pin)
+	if (spec->autocfg.dig_outs)
 		spec->multiout.dig_out_nid = ALC260_DIGOUT_NID;
 	if (spec->kctls.list)
 		add_mixer(spec, spec->kctls.list);
@@ -5631,7 +5666,7 @@
 	add_verb(spec, alc260_volume_init_verbs);
 
 	spec->num_mux_defs = 1;
-	spec->input_mux = &spec->private_imux;
+	spec->input_mux = &spec->private_imux[0];
 
 	store_pin_configs(codec);
 	return 1;
@@ -5701,8 +5736,7 @@
 static struct alc_config_preset alc260_presets[] = {
 	[ALC260_BASIC] = {
 		.mixers = { alc260_base_output_mixer,
-			    alc260_input_mixer,
-			    alc260_pc_beep_mixer },
+			    alc260_input_mixer },
 		.init_verbs = { alc260_init_verbs },
 		.num_dacs = ARRAY_SIZE(alc260_dac_nids),
 		.dac_nids = alc260_dac_nids,
@@ -5857,6 +5891,12 @@
 		}
 	}
 
+	err = snd_hda_attach_beep_device(codec, 0x1);
+	if (err < 0) {
+		alc_free(codec);
+		return err;
+	}
+
 	if (board_config != ALC260_AUTO)
 		setup_preset(spec, &alc260_presets[board_config]);
 
@@ -5882,6 +5922,7 @@
 		}
 	}
 	set_capture_mixer(spec);
+	set_beep_amp(spec, 0x07, 0x05, HDA_INPUT);
 
 	spec->vmaster_nid = 0x08;
 
@@ -6053,8 +6094,6 @@
 	HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
 	HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT),
 	HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
-	HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
-	HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
 	{ } /* end */
 };
 
@@ -6081,8 +6120,6 @@
 	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
 	HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
 	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
-	HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
-	HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
 	{ } /* end */
 };
 
@@ -6134,8 +6171,6 @@
 	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
 	HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
 	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
-	HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
-	HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
 	{ } /* end */
 };
 
@@ -6244,8 +6279,10 @@
 	HDA_CODEC_MUTE("Headphone Playback Switch", 0x18, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x01, HDA_INPUT),
 	HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x01, HDA_INPUT),
+	/* FIXME: this looks suspicious...
 	HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x02, HDA_INPUT),
 	HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x02, HDA_INPUT),
+	*/
 	{ } /* end */
 };
 
@@ -6900,18 +6937,21 @@
 static void alc882_auto_init_input_src(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
-	const struct hda_input_mux *imux = spec->input_mux;
 	int c;
 
 	for (c = 0; c < spec->num_adc_nids; c++) {
 		hda_nid_t conn_list[HDA_MAX_NUM_INPUTS];
 		hda_nid_t nid = spec->capsrc_nids[c];
+		unsigned int mux_idx;
+		const struct hda_input_mux *imux;
 		int conns, mute, idx, item;
 
 		conns = snd_hda_get_connections(codec, nid, conn_list,
 						ARRAY_SIZE(conn_list));
 		if (conns < 0)
 			continue;
+		mux_idx = c >= spec->num_mux_defs ? 0 : c;
+		imux = &spec->input_mux[mux_idx];
 		for (idx = 0; idx < conns; idx++) {
 			/* if the current connection is the selected one,
 			 * unmute it as default - otherwise mute it
@@ -6924,8 +6964,20 @@
 					break;
 				}
 			}
-			snd_hda_codec_write(codec, nid, 0,
-					    AC_VERB_SET_AMP_GAIN_MUTE, mute);
+			/* check if we have a selector or mixer
+			 * we could check for the widget type instead, but
+			 * just check for Amp-In presence (in case of mixer
+			 * without amp-in there is something wrong, this
+			 * function shouldn't be used or capsrc nid is wrong)
+			 */
+			if (get_wcaps(codec, nid) & AC_WCAP_IN_AMP)
+				snd_hda_codec_write(codec, nid, 0,
+						    AC_VERB_SET_AMP_GAIN_MUTE,
+						    mute);
+			else if (mute != AMP_IN_MUTE(idx))
+				snd_hda_codec_write(codec, nid, 0,
+						    AC_VERB_SET_CONNECT_SEL,
+						    idx);
 		}
 	}
 }
@@ -7053,6 +7105,12 @@
 		}
 	}
 
+	err = snd_hda_attach_beep_device(codec, 0x1);
+	if (err < 0) {
+		alc_free(codec);
+		return err;
+	}
+
 	if (board_config != ALC882_AUTO)
 		setup_preset(spec, &alc882_presets[board_config]);
 
@@ -7073,7 +7131,7 @@
 	spec->stream_digital_playback = &alc882_pcm_digital_playback;
 	spec->stream_digital_capture = &alc882_pcm_digital_capture;
 
-	spec->is_mix_capture = 1; /* matrix-style capture */
+	spec->capture_style = CAPT_MIX; /* matrix-style capture */
 	if (!spec->adc_nids && spec->input_mux) {
 		/* check whether NID 0x07 is valid */
 		unsigned int wcap = get_wcaps(codec, 0x07);
@@ -7090,6 +7148,7 @@
 		}
 	}
 	set_capture_mixer(spec);
+	set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
 
 	spec->vmaster_nid = 0x0c;
 
@@ -7141,10 +7200,14 @@
 	0x09, 0x08
 };
 
+#define alc889_adc_nids		alc880_adc_nids
+
 static hda_nid_t alc883_capsrc_nids[2] = { 0x23, 0x22 };
 
 static hda_nid_t alc883_capsrc_nids_rev[2] = { 0x22, 0x23 };
 
+#define alc889_capsrc_nids	alc882_capsrc_nids
+
 /* input MUX */
 /* FIXME: should be a matrix-type input source selection */
 
@@ -7362,8 +7425,6 @@
 	HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
 	HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT),
 	HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
-	HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
-	HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
 	{ } /* end */
 };
 
@@ -7426,8 +7487,6 @@
 	HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
 	HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT),
 	HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
-	HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
-	HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
 	{ } /* end */
 };
 
@@ -7451,8 +7510,6 @@
 	HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
 	HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT),
 	HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
-	HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
-	HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
 	{ } /* end */
 };
 
@@ -7477,8 +7534,6 @@
 	HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
 	HDA_CODEC_VOLUME("Front Mic Boost", 0x18, 0, HDA_INPUT),
 	HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
-	HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
-	HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
 	{ } /* end */
 };
 
@@ -7502,8 +7557,6 @@
 	HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
 	HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT),
 	HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
-	HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
-	HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
 	{ } /* end */
 };
 
@@ -8201,7 +8254,7 @@
 {
 	switch (res >> 26) {
 	case ALC880_HP_EVENT:
-		printk("hp_event\n");
+		/* printk(KERN_DEBUG "hp_event\n"); */
 		alc888_6st_dell_front_automute(codec);
 		break;
 	}
@@ -8467,9 +8520,11 @@
 		ALC888_ACER_ASPIRE_4930G),
 	SND_PCI_QUIRK(0x1025, 0x013f, "Acer Aspire 5930G",
 		ALC888_ACER_ASPIRE_4930G),
+	SND_PCI_QUIRK(0x1025, 0x0158, "Acer AX1700-U3700A", ALC883_AUTO),
 	SND_PCI_QUIRK(0x1025, 0x015e, "Acer Aspire 6930G",
 		ALC888_ACER_ASPIRE_4930G),
-	SND_PCI_QUIRK(0x1025, 0, "Acer laptop", ALC883_ACER), /* default Acer */
+	/* default Acer */
+	SND_PCI_QUIRK_VENDOR(0x1025, "Acer laptop", ALC883_ACER),
 	SND_PCI_QUIRK(0x1028, 0x020d, "Dell Inspiron 530", ALC888_6ST_DELL),
 	SND_PCI_QUIRK(0x103c, 0x2a3d, "HP Pavillion", ALC883_6ST_DIG),
 	SND_PCI_QUIRK(0x103c, 0x2a4f, "HP Samba", ALC888_3ST_HP),
@@ -8515,7 +8570,7 @@
 	SND_PCI_QUIRK(0x147b, 0x1083, "Abit IP35-PRO", ALC883_6ST_DIG),
 	SND_PCI_QUIRK(0x1558, 0x0721, "Clevo laptop M720R", ALC883_CLEVO_M720),
 	SND_PCI_QUIRK(0x1558, 0x0722, "Clevo laptop M720SR", ALC883_CLEVO_M720),
-	SND_PCI_QUIRK(0x1558, 0, "Clevo laptop", ALC883_LAPTOP_EAPD),
+	SND_PCI_QUIRK_VENDOR(0x1558, "Clevo laptop", ALC883_LAPTOP_EAPD),
 	SND_PCI_QUIRK(0x15d9, 0x8780, "Supermicro PDSBA", ALC883_3ST_6ch),
 	SND_PCI_QUIRK(0x161f, 0x2054, "Medion laptop", ALC883_MEDION),
 	SND_PCI_QUIRK(0x1734, 0x1107, "FSC AMILO Xi2550",
@@ -8540,6 +8595,10 @@
 	{}
 };
 
+static hda_nid_t alc1200_slave_dig_outs[] = {
+	ALC883_DIGOUT_NID, 0,
+};
+
 static struct alc_config_preset alc883_presets[] = {
 	[ALC883_3ST_2ch_DIG] = {
 		.mixers = { alc883_3ST_2ch_mixer },
@@ -8880,6 +8939,7 @@
 		.dac_nids = alc883_dac_nids,
 		.dig_out_nid = ALC1200_DIGOUT_NID,
 		.dig_in_nid = ALC883_DIGIN_NID,
+		.slave_dig_outs = alc1200_slave_dig_outs,
 		.num_channel_mode = ARRAY_SIZE(alc883_sixstack_modes),
 		.channel_mode = alc883_sixstack_modes,
 		.input_mux = &alc883_capture_source,
@@ -8966,6 +9026,8 @@
 {
 	struct alc_spec *spec = codec->spec;
 	int err = alc880_parse_auto_config(codec);
+	struct auto_pin_cfg *cfg = &spec->autocfg;
+	int i;
 
 	if (err < 0)
 		return err;
@@ -8979,6 +9041,26 @@
 	/* hack - override the init verbs */
 	spec->init_verbs[0] = alc883_auto_init_verbs;
 
+	/* setup input_mux for ALC889 */
+	if (codec->vendor_id == 0x10ec0889) {
+		/* digital-mic input pin is excluded in alc880_auto_create..()
+		 * because it's under 0x18
+		 */
+		if (cfg->input_pins[AUTO_PIN_MIC] == 0x12 ||
+		    cfg->input_pins[AUTO_PIN_FRONT_MIC] == 0x12) {
+			struct hda_input_mux *imux = &spec->private_imux[0];
+			for (i = 1; i < 3; i++)
+				memcpy(&spec->private_imux[i],
+				       &spec->private_imux[0],
+				       sizeof(spec->private_imux[0]));
+			imux->items[imux->num_items].label = "Int DMic";
+			imux->items[imux->num_items].index = 0x0b;
+			imux->num_items++;
+			spec->num_mux_defs = 3;
+			spec->input_mux = spec->private_imux;
+		}
+	}
+
 	return 1; /* config found */
 }
 
@@ -9030,6 +9112,12 @@
 		}
 	}
 
+	err = snd_hda_attach_beep_device(codec, 0x1);
+	if (err < 0) {
+		alc_free(codec);
+		return err;
+	}
+
 	if (board_config != ALC883_AUTO)
 		setup_preset(spec, &alc883_presets[board_config]);
 
@@ -9042,14 +9130,36 @@
 			spec->stream_name_analog = "ALC888 Analog";
 			spec->stream_name_digital = "ALC888 Digital";
 		}
+		if (!spec->num_adc_nids) {
+			spec->num_adc_nids = ARRAY_SIZE(alc883_adc_nids);
+			spec->adc_nids = alc883_adc_nids;
+		}
+		if (!spec->capsrc_nids)
+			spec->capsrc_nids = alc883_capsrc_nids;
+		spec->capture_style = CAPT_MIX; /* matrix-style capture */
 		break;
 	case 0x10ec0889:
 		spec->stream_name_analog = "ALC889 Analog";
 		spec->stream_name_digital = "ALC889 Digital";
+		if (!spec->num_adc_nids) {
+			spec->num_adc_nids = ARRAY_SIZE(alc889_adc_nids);
+			spec->adc_nids = alc889_adc_nids;
+		}
+		if (!spec->capsrc_nids)
+			spec->capsrc_nids = alc889_capsrc_nids;
+		spec->capture_style = CAPT_1MUX_MIX; /* 1mux/Nmix-style
+							capture */
 		break;
 	default:
 		spec->stream_name_analog = "ALC883 Analog";
 		spec->stream_name_digital = "ALC883 Digital";
+		if (!spec->num_adc_nids) {
+			spec->num_adc_nids = ARRAY_SIZE(alc883_adc_nids);
+			spec->adc_nids = alc883_adc_nids;
+		}
+		if (!spec->capsrc_nids)
+			spec->capsrc_nids = alc883_capsrc_nids;
+		spec->capture_style = CAPT_MIX; /* matrix-style capture */
 		break;
 	}
 
@@ -9060,15 +9170,9 @@
 	spec->stream_digital_playback = &alc883_pcm_digital_playback;
 	spec->stream_digital_capture = &alc883_pcm_digital_capture;
 
-	if (!spec->num_adc_nids) {
-		spec->num_adc_nids = ARRAY_SIZE(alc883_adc_nids);
-		spec->adc_nids = alc883_adc_nids;
-	}
-	if (!spec->capsrc_nids)
-		spec->capsrc_nids = alc883_capsrc_nids;
-	spec->is_mix_capture = 1; /* matrix-style capture */
 	if (!spec->cap_mixer)
 		set_capture_mixer(spec);
+	set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
 
 	spec->vmaster_nid = 0x0c;
 
@@ -9121,8 +9225,6 @@
 	HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
 	HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
 	HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT),
-	/* HDA_CODEC_VOLUME("PC Beep Playback Volume", 0x0b, 0x05, HDA_INPUT),
-	   HDA_CODEC_MUTE("PC Beep Playback Switch", 0x0b, 0x05, HDA_INPUT), */
 	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0D, 0x0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
@@ -9143,8 +9245,6 @@
 	HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
 	HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
 	HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT),
-	/* HDA_CODEC_VOLUME("PC Beep Playback Volume", 0x0b, 0x05, HDA_INPUT),
-	   HDA_CODEC_MUTE("PC Beep Playback Switch", 0x0b, 0x05, HDA_INPUT), */
 	/*HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0D, 0x0, HDA_OUTPUT),*/
 	HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
 	{ } /* end */
@@ -9253,8 +9353,6 @@
 	HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
 	HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
 	HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
-	HDA_CODEC_VOLUME("PC Beep Playback Volume", 0x0b, 0x05, HDA_INPUT),
-	HDA_CODEC_MUTE("PC Beep Playback Switch", 0x0b, 0x05, HDA_INPUT),
 	HDA_CODEC_VOLUME("AUX IN Playback Volume", 0x0b, 0x06, HDA_INPUT),
 	HDA_CODEC_MUTE("AUX IN Playback Switch", 0x0b, 0x06, HDA_INPUT),
 	{ } /* end */
@@ -9283,8 +9381,6 @@
 	HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x01, HDA_INPUT),
 	HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
 	HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
-	HDA_CODEC_VOLUME("PC Beep Playback Volume", 0x0b, 0x05, HDA_INPUT),
-	HDA_CODEC_MUTE("PC Beep Playback Switch", 0x0b, 0x05, HDA_INPUT),
 	{ } /* end */
 };
 
@@ -9432,6 +9528,67 @@
 	{ } /* end */
 };
 
+static struct snd_kcontrol_new alc262_tyan_mixer[] = {
+	HDA_CODEC_VOLUME("Master Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+	HDA_BIND_MUTE("Master Playback Switch", 0x0c, 2, HDA_INPUT),
+	HDA_CODEC_VOLUME("Aux Playback Volume", 0x0b, 0x06, HDA_INPUT),
+	HDA_CODEC_MUTE("Aux Playback Switch", 0x0b, 0x06, HDA_INPUT),
+	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
+	HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
+	HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
+	HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT),
+	{ } /* end */
+};
+
+static struct hda_verb alc262_tyan_verbs[] = {
+	/* Headphone automute */
+	{0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
+	{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+	{0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
+
+	/* P11 AUX_IN, white 4-pin connector */
+	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	{0x14, AC_VERB_SET_CONFIG_DEFAULT_BYTES_1, 0xe1},
+	{0x14, AC_VERB_SET_CONFIG_DEFAULT_BYTES_2, 0x93},
+	{0x14, AC_VERB_SET_CONFIG_DEFAULT_BYTES_3, 0x19},
+
+	{}
+};
+
+/* unsolicited event for HP jack sensing */
+static void alc262_tyan_automute(struct hda_codec *codec)
+{
+	unsigned int mute;
+	unsigned int present;
+
+	snd_hda_codec_read(codec, 0x1b, 0, AC_VERB_SET_PIN_SENSE, 0);
+	present = snd_hda_codec_read(codec, 0x1b, 0,
+				     AC_VERB_GET_PIN_SENSE, 0);
+	present = (present & 0x80000000) != 0;
+	if (present) {
+		/* mute line output on ATX panel */
+		snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
+					 HDA_AMP_MUTE, HDA_AMP_MUTE);
+	} else {
+		/* unmute line output if necessary */
+		mute = snd_hda_codec_amp_read(codec, 0x1b, 0, HDA_OUTPUT, 0);
+		snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
+					 HDA_AMP_MUTE, mute);
+	}
+}
+
+static void alc262_tyan_unsol_event(struct hda_codec *codec,
+				       unsigned int res)
+{
+	if ((res >> 26) != ALC880_HP_EVENT)
+		return;
+	alc262_tyan_automute(codec);
+}
+
 #define alc262_capture_mixer		alc882_capture_mixer
 #define alc262_capture_alt_mixer	alc882_capture_alt_mixer
 
@@ -9898,8 +10055,6 @@
 	},
 	HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
 	HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
-	HDA_CODEC_VOLUME("PC Speaker Volume", 0x0b, 0x05, HDA_INPUT),
-	HDA_CODEC_MUTE("PC Speaker Switch", 0x0b, 0x05, HDA_INPUT),
 	HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
 	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
 	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
@@ -10471,8 +10626,14 @@
 					   alc262_ignore);
 	if (err < 0)
 		return err;
-	if (!spec->autocfg.line_outs)
+	if (!spec->autocfg.line_outs) {
+		if (spec->autocfg.dig_outs || spec->autocfg.dig_in_pin) {
+			spec->multiout.max_channels = 2;
+			spec->no_analog = 1;
+			goto dig_only;
+		}
 		return 0; /* can't find valid BIOS pin config */
+	}
 	err = alc262_auto_create_multi_out_ctls(spec, &spec->autocfg);
 	if (err < 0)
 		return err;
@@ -10482,8 +10643,11 @@
 
 	spec->multiout.max_channels = spec->multiout.num_dacs * 2;
 
-	if (spec->autocfg.dig_out_pin)
+ dig_only:
+	if (spec->autocfg.dig_outs) {
 		spec->multiout.dig_out_nid = ALC262_DIGOUT_NID;
+		spec->dig_out_type = spec->autocfg.dig_out_type[0];
+	}
 	if (spec->autocfg.dig_in_pin)
 		spec->dig_in_nid = ALC262_DIGIN_NID;
 
@@ -10492,7 +10656,7 @@
 
 	add_verb(spec, alc262_volume_init_verbs);
 	spec->num_mux_defs = 1;
-	spec->input_mux = &spec->private_imux;
+	spec->input_mux = &spec->private_imux[0];
 
 	err = alc_auto_add_mic_boost(codec);
 	if (err < 0)
@@ -10540,20 +10704,17 @@
 	[ALC262_ULTRA]		= "ultra",
 	[ALC262_LENOVO_3000]	= "lenovo-3000",
 	[ALC262_NEC]		= "nec",
+	[ALC262_TYAN]		= "tyan",
 	[ALC262_AUTO]		= "auto",
 };
 
 static struct snd_pci_quirk alc262_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x1002, 0x437b, "Hippo", ALC262_HIPPO),
 	SND_PCI_QUIRK(0x1033, 0x8895, "NEC Versa S9100", ALC262_NEC),
-	SND_PCI_QUIRK(0x103c, 0x12fe, "HP xw9400", ALC262_HP_BPC),
-	SND_PCI_QUIRK(0x103c, 0x12ff, "HP xw4550", ALC262_HP_BPC),
-	SND_PCI_QUIRK(0x103c, 0x1306, "HP xw8600", ALC262_HP_BPC),
-	SND_PCI_QUIRK(0x103c, 0x1307, "HP xw6600", ALC262_HP_BPC),
-	SND_PCI_QUIRK(0x103c, 0x1308, "HP xw4600", ALC262_HP_BPC),
-	SND_PCI_QUIRK(0x103c, 0x1309, "HP xw4*00", ALC262_HP_BPC),
-	SND_PCI_QUIRK(0x103c, 0x130a, "HP xw6*00", ALC262_HP_BPC),
-	SND_PCI_QUIRK(0x103c, 0x130b, "HP xw8*00", ALC262_HP_BPC),
+	SND_PCI_QUIRK_MASK(0x103c, 0xff00, 0x1200, "HP xw series",
+			   ALC262_HP_BPC),
+	SND_PCI_QUIRK_MASK(0x103c, 0xff00, 0x1300, "HP xw series",
+			   ALC262_HP_BPC),
 	SND_PCI_QUIRK(0x103c, 0x2800, "HP D7000", ALC262_HP_BPC_D7000_WL),
 	SND_PCI_QUIRK(0x103c, 0x2801, "HP D7000", ALC262_HP_BPC_D7000_WF),
 	SND_PCI_QUIRK(0x103c, 0x2802, "HP D7000", ALC262_HP_BPC_D7000_WL),
@@ -10580,8 +10741,9 @@
 	SND_PCI_QUIRK(0x1179, 0xff7b, "Toshiba S06", ALC262_TOSHIBA_S06),
 	SND_PCI_QUIRK(0x10cf, 0x1397, "Fujitsu", ALC262_FUJITSU),
 	SND_PCI_QUIRK(0x10cf, 0x142d, "Fujitsu Lifebook E8410", ALC262_FUJITSU),
-	SND_PCI_QUIRK(0x144d, 0xc032, "Samsung Q1 Ultra", ALC262_ULTRA),
-	SND_PCI_QUIRK(0x144d, 0xc039, "Samsung Q1U EL", ALC262_ULTRA),
+	SND_PCI_QUIRK(0x10f1, 0x2915, "Tyan Thunder n6650W", ALC262_TYAN),
+	SND_PCI_QUIRK_MASK(0x144d, 0xff00, 0xc032, "Samsung Q1",
+			   ALC262_ULTRA),
 	SND_PCI_QUIRK(0x144d, 0xc510, "Samsung Q45", ALC262_HIPPO),
 	SND_PCI_QUIRK(0x17aa, 0x384e, "Lenovo 3000 y410", ALC262_LENOVO_3000),
 	SND_PCI_QUIRK(0x17ff, 0x0560, "Benq ED8", ALC262_BENQ_ED8),
@@ -10798,6 +10960,19 @@
 		.unsol_event = alc262_hippo_unsol_event,
 		.init_hook = alc262_hippo_automute,
 	},
+	[ALC262_TYAN] = {
+		.mixers = { alc262_tyan_mixer },
+		.init_verbs = { alc262_init_verbs, alc262_tyan_verbs},
+		.num_dacs = ARRAY_SIZE(alc262_dac_nids),
+		.dac_nids = alc262_dac_nids,
+		.hp_nid = 0x02,
+		.dig_out_nid = ALC262_DIGOUT_NID,
+		.num_channel_mode = ARRAY_SIZE(alc262_modes),
+		.channel_mode = alc262_modes,
+		.input_mux = &alc262_capture_source,
+		.unsol_event = alc262_tyan_unsol_event,
+		.init_hook = alc262_tyan_automute,
+	},
 };
 
 static int patch_alc262(struct hda_codec *codec)
@@ -10850,6 +11025,12 @@
 		}
 	}
 
+	err = snd_hda_attach_beep_device(codec, 0x1);
+	if (err < 0) {
+		alc_free(codec);
+		return err;
+	}
+
 	if (board_config != ALC262_AUTO)
 		setup_preset(spec, &alc262_presets[board_config]);
 
@@ -10861,7 +11042,7 @@
 	spec->stream_digital_playback = &alc262_pcm_digital_playback;
 	spec->stream_digital_capture = &alc262_pcm_digital_capture;
 
-	spec->is_mix_capture = 1;
+	spec->capture_style = CAPT_MIX;
 	if (!spec->adc_nids && spec->input_mux) {
 		/* check whether NID 0x07 is valid */
 		unsigned int wcap = get_wcaps(codec, 0x07);
@@ -10878,8 +11059,9 @@
 			spec->capsrc_nids = alc262_capsrc_nids;
 		}
 	}
-	if (!spec->cap_mixer)
+	if (!spec->cap_mixer && !spec->no_analog)
 		set_capture_mixer(spec);
+	set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
 
 	spec->vmaster_nid = 0x0c;
 
@@ -11259,19 +11441,13 @@
 static struct hda_verb alc268_base_init_verbs[] = {
 	/* Unmute DAC0-1 and set vol = 0 */
 	{0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	{0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-	{0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
 	{0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	{0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-	{0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
 
 	/*
 	 * Set up output mixers (0x0c - 0x0e)
 	 */
 	/* set vol=0 to output mixers */
 	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
         {0x0e, AC_VERB_SET_CONNECT_SEL, 0x00},
 
 	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
@@ -11290,9 +11466,7 @@
 	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
 	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
 	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
 	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	{0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
 
 	/* set PCBEEP vol = 0, mute connections */
 	{0x1d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
@@ -11314,10 +11488,8 @@
  */
 static struct hda_verb alc268_volume_init_verbs[] = {
 	/* set output DAC */
-	{0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-	{0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-	{0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-	{0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	{0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+	{0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
 
 	{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
 	{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
@@ -11325,16 +11497,12 @@
 	{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
 	{0x1d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
 
-	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
 	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
 	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
 	{0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
 
 	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
 	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	{0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
 
 	/* set PCBEEP vol = 0, mute connections */
 	{0x1d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
@@ -11533,7 +11701,7 @@
 static int alc268_auto_create_analog_input_ctls(struct alc_spec *spec,
 						const struct auto_pin_cfg *cfg)
 {
-	struct hda_input_mux *imux = &spec->private_imux;
+	struct hda_input_mux *imux = &spec->private_imux[0];
 	int i, idx1;
 
 	for (i = 0; i < AUTO_PIN_LAST; i++) {
@@ -11640,7 +11808,7 @@
 	spec->multiout.max_channels = 2;
 
 	/* digital only support output */
-	if (spec->autocfg.dig_out_pin)
+	if (spec->autocfg.dig_outs)
 		spec->multiout.dig_out_nid = ALC268_DIGOUT_NID;
 
 	if (spec->kctls.list)
@@ -11651,7 +11819,7 @@
 
 	add_verb(spec, alc268_volume_init_verbs);
 	spec->num_mux_defs = 1;
-	spec->input_mux = &spec->private_imux;
+	spec->input_mux = &spec->private_imux[0];
 
 	err = alc_auto_add_mic_boost(codec);
 	if (err < 0)
@@ -11719,7 +11887,7 @@
 
 static struct alc_config_preset alc268_presets[] = {
 	[ALC267_QUANTA_IL1] = {
-		.mixers = { alc267_quanta_il1_mixer },
+		.mixers = { alc267_quanta_il1_mixer, alc268_beep_mixer },
 		.init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs,
 				alc267_quanta_il1_verbs },
 		.num_dacs = ARRAY_SIZE(alc268_dac_nids),
@@ -11801,7 +11969,8 @@
 	},
 	[ALC268_ACER_ASPIRE_ONE] = {
 		.mixers = { alc268_acer_aspire_one_mixer,
-				alc268_capture_alt_mixer },
+			    alc268_beep_mixer,
+			    alc268_capture_alt_mixer },
 		.init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs,
 				alc268_acer_aspire_one_verbs },
 		.num_dacs = ARRAY_SIZE(alc268_dac_nids),
@@ -11870,7 +12039,7 @@
 {
 	struct alc_spec *spec;
 	int board_config;
-	int err;
+	int i, has_beep, err;
 
 	spec = kcalloc(1, sizeof(*spec), GFP_KERNEL);
 	if (spec == NULL)
@@ -11902,6 +12071,12 @@
 		}
 	}
 
+	err = snd_hda_attach_beep_device(codec, 0x1);
+	if (err < 0) {
+		alc_free(codec);
+		return err;
+	}
+
 	if (board_config != ALC268_AUTO)
 		setup_preset(spec, &alc268_presets[board_config]);
 
@@ -11919,13 +12094,28 @@
 
 	spec->stream_digital_playback = &alc268_pcm_digital_playback;
 
-	if (!query_amp_caps(codec, 0x1d, HDA_INPUT))
-		/* override the amp caps for beep generator */
-		snd_hda_override_amp_caps(codec, 0x1d, HDA_INPUT,
+	has_beep = 0;
+	for (i = 0; i < spec->num_mixers; i++) {
+		if (spec->mixers[i] == alc268_beep_mixer) {
+			has_beep = 1;
+			break;
+		}
+	}
+
+	if (has_beep) {
+		err = snd_hda_attach_beep_device(codec, 0x1);
+		if (err < 0) {
+			alc_free(codec);
+			return err;
+		}
+		if (!query_amp_caps(codec, 0x1d, HDA_INPUT))
+			/* override the amp caps for beep generator */
+			snd_hda_override_amp_caps(codec, 0x1d, HDA_INPUT,
 					  (0x0c << AC_AMPCAP_OFFSET_SHIFT) |
 					  (0x0c << AC_AMPCAP_NUM_STEPS_SHIFT) |
 					  (0x07 << AC_AMPCAP_STEP_SIZE_SHIFT) |
 					  (0 << AC_AMPCAP_MUTE_SHIFT));
+	}
 
 	if (!spec->adc_nids && spec->input_mux) {
 		/* check whether NID 0x07 is valid */
@@ -12008,8 +12198,6 @@
 	HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
 	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
 	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
-	HDA_CODEC_VOLUME("Beep Playback Volume", 0x0b, 0x4, HDA_INPUT),
-	HDA_CODEC_MUTE("Beep Playback Switch", 0x0b, 0x4, HDA_INPUT),
 	HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
 	HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
 	HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
@@ -12036,8 +12224,6 @@
 	HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
 	HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
 	HDA_CODEC_VOLUME("Internal Mic Boost", 0x19, 0, HDA_INPUT),
-	HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x04, HDA_INPUT),
-	HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x04, HDA_INPUT),
 	{ }
 };
 
@@ -12061,8 +12247,6 @@
 	HDA_CODEC_VOLUME("Dock Mic Playback Volume", 0x0b, 0x03, HDA_INPUT),
 	HDA_CODEC_MUTE("Dock Mic Playback Switch", 0x0b, 0x03, HDA_INPUT),
 	HDA_CODEC_VOLUME("Dock Mic Boost", 0x1b, 0, HDA_INPUT),
-	HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x04, HDA_INPUT),
-	HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x04, HDA_INPUT),
 	{ }
 };
 
@@ -12099,13 +12283,6 @@
 	{ } /* end */
 };
 
-/* beep control */
-static struct snd_kcontrol_new alc269_beep_mixer[] = {
-	HDA_CODEC_VOLUME("Beep Playback Volume", 0x0b, 0x4, HDA_INPUT),
-	HDA_CODEC_MUTE("Beep Playback Switch", 0x0b, 0x4, HDA_INPUT),
-	{ } /* end */
-};
-
 static struct hda_verb alc269_quanta_fl1_verbs[] = {
 	{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
 	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
@@ -12505,7 +12682,7 @@
 	 */
 	if (cfg->input_pins[AUTO_PIN_MIC] == 0x12 ||
 	    cfg->input_pins[AUTO_PIN_FRONT_MIC] == 0x12) {
-		struct hda_input_mux *imux = &spec->private_imux;
+		struct hda_input_mux *imux = &spec->private_imux[0];
 		imux->items[imux->num_items].label = "Int Mic";
 		imux->items[imux->num_items].index = 0x05;
 		imux->num_items++;
@@ -12529,7 +12706,7 @@
 static int alc269_parse_auto_config(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
-	int i, err;
+	int err;
 	static hda_nid_t alc269_ignore[] = { 0x1d, 0 };
 
 	err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
@@ -12546,22 +12723,15 @@
 
 	spec->multiout.max_channels = spec->multiout.num_dacs * 2;
 
-	if (spec->autocfg.dig_out_pin)
+	if (spec->autocfg.dig_outs)
 		spec->multiout.dig_out_nid = ALC269_DIGOUT_NID;
 
 	if (spec->kctls.list)
 		add_mixer(spec, spec->kctls.list);
 
-	/* create a beep mixer control if the pin 0x1d isn't assigned */
-	for (i = 0; i < ARRAY_SIZE(spec->autocfg.input_pins); i++)
-		if (spec->autocfg.input_pins[i] == 0x1d)
-			break;
-	if (i >= ARRAY_SIZE(spec->autocfg.input_pins))
-		add_mixer(spec, alc269_beep_mixer);
-
 	add_verb(spec, alc269_init_verbs);
 	spec->num_mux_defs = 1;
-	spec->input_mux = &spec->private_imux;
+	spec->input_mux = &spec->private_imux[0];
 	/* set default input source */
 	snd_hda_codec_write_cache(codec, alc269_capsrc_nids[0],
 				  0, AC_VERB_SET_CONNECT_SEL,
@@ -12671,7 +12841,7 @@
 		.init_hook = alc269_eeepc_dmic_inithook,
 	},
 	[ALC269_FUJITSU] = {
-		.mixers = { alc269_fujitsu_mixer, alc269_beep_mixer },
+		.mixers = { alc269_fujitsu_mixer },
 		.cap_mixer = alc269_epc_capture_mixer,
 		.init_verbs = { alc269_init_verbs,
 				alc269_eeepc_dmic_init_verbs },
@@ -12736,6 +12906,12 @@
 		}
 	}
 
+	err = snd_hda_attach_beep_device(codec, 0x1);
+	if (err < 0) {
+		alc_free(codec);
+		return err;
+	}
+
 	if (board_config != ALC269_AUTO)
 		setup_preset(spec, &alc269_presets[board_config]);
 
@@ -12752,6 +12928,7 @@
 	spec->capsrc_nids = alc269_capsrc_nids;
 	if (!spec->cap_mixer)
 		set_capture_mixer(spec);
+	set_beep_amp(spec, 0x0b, 0x04, HDA_INPUT);
 
 	codec->patch_ops = alc_patch_ops;
 	if (board_config == ALC269_AUTO)
@@ -13002,8 +13179,6 @@
 static struct snd_kcontrol_new alc861_asus_laptop_mixer[] = {
 	HDA_CODEC_VOLUME("CD Playback Volume", 0x15, 0x0, HDA_INPUT),
 	HDA_CODEC_MUTE("CD Playback Switch", 0x15, 0x0, HDA_INPUT),
-	HDA_CODEC_VOLUME("PC Beep Playback Volume", 0x23, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("PC Beep Playback Switch", 0x23, 0x0, HDA_OUTPUT),
 	{ }
 };
 
@@ -13477,7 +13652,7 @@
 static int alc861_auto_create_analog_input_ctls(struct alc_spec *spec,
 						const struct auto_pin_cfg *cfg)
 {
-	struct hda_input_mux *imux = &spec->private_imux;
+	struct hda_input_mux *imux = &spec->private_imux[0];
 	int i, err, idx, idx1;
 
 	for (i = 0; i < AUTO_PIN_LAST; i++) {
@@ -13605,7 +13780,7 @@
 
 	spec->multiout.max_channels = spec->multiout.num_dacs * 2;
 
-	if (spec->autocfg.dig_out_pin)
+	if (spec->autocfg.dig_outs)
 		spec->multiout.dig_out_nid = ALC861_DIGOUT_NID;
 
 	if (spec->kctls.list)
@@ -13614,7 +13789,7 @@
 	add_verb(spec, alc861_auto_init_verbs);
 
 	spec->num_mux_defs = 1;
-	spec->input_mux = &spec->private_imux;
+	spec->input_mux = &spec->private_imux[0];
 
 	spec->adc_nids = alc861_adc_nids;
 	spec->num_adc_nids = ARRAY_SIZE(alc861_adc_nids);
@@ -13829,6 +14004,12 @@
 		}
 	}
 
+	err = snd_hda_attach_beep_device(codec, 0x23);
+	if (err < 0) {
+		alc_free(codec);
+		return err;
+	}
+
 	if (board_config != ALC861_AUTO)
 		setup_preset(spec, &alc861_presets[board_config]);
 
@@ -13840,6 +14021,8 @@
 	spec->stream_digital_playback = &alc861_pcm_digital_playback;
 	spec->stream_digital_capture = &alc861_pcm_digital_capture;
 
+	set_beep_amp(spec, 0x23, 0, HDA_OUTPUT);
+
 	spec->vmaster_nid = 0x03;
 
 	codec->patch_ops = alc_patch_ops;
@@ -13996,9 +14179,6 @@
 	HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
 	HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
 
-	HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
-	HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
-
 	{ } /* end */
 };
 
@@ -14022,9 +14202,6 @@
 	HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
 	HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
 
-	HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
-	HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
-
 	{ } /* end */
 };
 
@@ -14063,8 +14240,6 @@
 	HDA_CODEC_VOLUME("Int Mic Boost", 0x19, 0, HDA_INPUT),
 	HDA_CODEC_VOLUME("Int Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
 	HDA_CODEC_MUTE("Int Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
-	HDA_CODEC_VOLUME("PC Beep Volume", 0x0b, 0x05, HDA_INPUT),
-	HDA_CODEC_MUTE("PC Beep Switch", 0x0b, 0x05, HDA_INPUT),
 	{ } /* end */
 };
 
@@ -14375,9 +14550,7 @@
 	SND_PCI_QUIRK(0x1179, 0xff03, "Toshiba P205", ALC861VD_LENOVO),
 	SND_PCI_QUIRK(0x1179, 0xff31, "Toshiba L30-149", ALC861VD_DALLAS),
 	SND_PCI_QUIRK(0x1565, 0x820d, "Biostar NF61S SE", ALC861VD_6ST_DIG),
-	SND_PCI_QUIRK(0x17aa, 0x2066, "Lenovo", ALC861VD_LENOVO),
-	SND_PCI_QUIRK(0x17aa, 0x3802, "Lenovo 3000 C200", ALC861VD_LENOVO),
-	SND_PCI_QUIRK(0x17aa, 0x384e, "Lenovo 3000 N200", ALC861VD_LENOVO),
+	SND_PCI_QUIRK_VENDOR(0x17aa, "Lenovo", ALC861VD_LENOVO),
 	SND_PCI_QUIRK(0x1849, 0x0862, "ASRock K8NF6G-VSTA", ALC861VD_6ST_DIG),
 	{}
 };
@@ -14709,7 +14882,7 @@
 
 	spec->multiout.max_channels = spec->multiout.num_dacs * 2;
 
-	if (spec->autocfg.dig_out_pin)
+	if (spec->autocfg.dig_outs)
 		spec->multiout.dig_out_nid = ALC861VD_DIGOUT_NID;
 
 	if (spec->kctls.list)
@@ -14718,7 +14891,7 @@
 	add_verb(spec, alc861vd_volume_init_verbs);
 
 	spec->num_mux_defs = 1;
-	spec->input_mux = &spec->private_imux;
+	spec->input_mux = &spec->private_imux[0];
 
 	err = alc_auto_add_mic_boost(codec);
 	if (err < 0)
@@ -14775,6 +14948,12 @@
 		}
 	}
 
+	err = snd_hda_attach_beep_device(codec, 0x23);
+	if (err < 0) {
+		alc_free(codec);
+		return err;
+	}
+
 	if (board_config != ALC861VD_AUTO)
 		setup_preset(spec, &alc861vd_presets[board_config]);
 
@@ -14797,9 +14976,10 @@
 	spec->adc_nids = alc861vd_adc_nids;
 	spec->num_adc_nids = ARRAY_SIZE(alc861vd_adc_nids);
 	spec->capsrc_nids = alc861vd_capsrc_nids;
-	spec->is_mix_capture = 1;
+	spec->capture_style = CAPT_MIX;
 
 	set_capture_mixer(spec);
+	set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
 
 	spec->vmaster_nid = 0x02;
 
@@ -14988,8 +15168,6 @@
 	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
 	HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
 	HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
-	HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
-	HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
 	{ } /* end */
 };
 
@@ -15011,8 +15189,6 @@
 	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
 	HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
 	HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
-	HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
-	HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
 	{ } /* end */
 };
 
@@ -15988,56 +16164,55 @@
 };
 
 static struct snd_pci_quirk alc662_cfg_tbl[] = {
+	SND_PCI_QUIRK(0x1019, 0x9087, "ECS", ALC662_ECS),
+	SND_PCI_QUIRK(0x1043, 0x1000, "ASUS N50Vm", ALC663_ASUS_MODE1),
+	SND_PCI_QUIRK(0x1043, 0x1092, "ASUS NB", ALC663_ASUS_MODE3),
+	SND_PCI_QUIRK(0x1043, 0x11c3, "ASUS M70V", ALC663_ASUS_MODE3),
+	SND_PCI_QUIRK(0x1043, 0x11d3, "ASUS NB", ALC663_ASUS_MODE1),
+	SND_PCI_QUIRK(0x1043, 0x11f3, "ASUS NB", ALC662_ASUS_MODE2),
+	SND_PCI_QUIRK(0x1043, 0x1203, "ASUS NB", ALC663_ASUS_MODE1),
+	SND_PCI_QUIRK(0x1043, 0x1339, "ASUS NB", ALC662_ASUS_MODE2),
+	SND_PCI_QUIRK(0x1043, 0x16c3, "ASUS NB", ALC662_ASUS_MODE2),
+	SND_PCI_QUIRK(0x1043, 0x1753, "ASUS NB", ALC662_ASUS_MODE2),
+	SND_PCI_QUIRK(0x1043, 0x1763, "ASUS NB", ALC663_ASUS_MODE6),
+	SND_PCI_QUIRK(0x1043, 0x1765, "ASUS NB", ALC663_ASUS_MODE6),
+	SND_PCI_QUIRK(0x1043, 0x1783, "ASUS NB", ALC662_ASUS_MODE2),
+	SND_PCI_QUIRK(0x1043, 0x1813, "ASUS NB", ALC662_ASUS_MODE2),
+	SND_PCI_QUIRK(0x1043, 0x1823, "ASUS NB", ALC663_ASUS_MODE5),
+	SND_PCI_QUIRK(0x1043, 0x1833, "ASUS NB", ALC663_ASUS_MODE6),
+	SND_PCI_QUIRK(0x1043, 0x1843, "ASUS NB", ALC662_ASUS_MODE2),
+	SND_PCI_QUIRK(0x1043, 0x1864, "ASUS NB", ALC662_ASUS_MODE2),
+	SND_PCI_QUIRK(0x1043, 0x1876, "ASUS NB", ALC662_ASUS_MODE2),
 	SND_PCI_QUIRK(0x1043, 0x1878, "ASUS M51VA", ALC663_ASUS_M51VA),
+	/*SND_PCI_QUIRK(0x1043, 0x1878, "ASUS M50Vr", ALC663_ASUS_MODE1),*/
+	SND_PCI_QUIRK(0x1043, 0x1893, "ASUS M50Vm", ALC663_ASUS_MODE3),
+	SND_PCI_QUIRK(0x1043, 0x1894, "ASUS X55", ALC663_ASUS_MODE3),
+	SND_PCI_QUIRK(0x1043, 0x1903, "ASUS F5GL", ALC663_ASUS_MODE1),
+	SND_PCI_QUIRK(0x1043, 0x1913, "ASUS NB", ALC662_ASUS_MODE2),
+	SND_PCI_QUIRK(0x1043, 0x1933, "ASUS F80Q", ALC662_ASUS_MODE2),
+	SND_PCI_QUIRK(0x1043, 0x1953, "ASUS NB", ALC663_ASUS_MODE1),
+	SND_PCI_QUIRK(0x1043, 0x1963, "ASUS X71C", ALC663_ASUS_MODE3),
+	SND_PCI_QUIRK(0x1043, 0x1993, "ASUS N20", ALC663_ASUS_MODE1),
 	SND_PCI_QUIRK(0x1043, 0x19a3, "ASUS G50V", ALC663_ASUS_G50V),
+	/*SND_PCI_QUIRK(0x1043, 0x19a3, "ASUS NB", ALC663_ASUS_MODE1),*/
+	SND_PCI_QUIRK(0x1043, 0x19b3, "ASUS F7Z", ALC663_ASUS_MODE1),
+	SND_PCI_QUIRK(0x1043, 0x19c3, "ASUS F5Z/F6x", ALC662_ASUS_MODE2),
+	SND_PCI_QUIRK(0x1043, 0x19e3, "ASUS NB", ALC663_ASUS_MODE1),
+	SND_PCI_QUIRK(0x1043, 0x19f3, "ASUS NB", ALC663_ASUS_MODE4),
 	SND_PCI_QUIRK(0x1043, 0x8290, "ASUS P5GC-MX", ALC662_3ST_6ch_DIG),
 	SND_PCI_QUIRK(0x1043, 0x82a1, "ASUS Eeepc", ALC662_ASUS_EEEPC_P701),
 	SND_PCI_QUIRK(0x1043, 0x82d1, "ASUS Eeepc EP20", ALC662_ASUS_EEEPC_EP20),
-	SND_PCI_QUIRK(0x1043, 0x1903, "ASUS F5GL", ALC663_ASUS_MODE1),
-	SND_PCI_QUIRK(0x1043, 0x1878, "ASUS M50Vr", ALC663_ASUS_MODE1),
-	SND_PCI_QUIRK(0x1043, 0x1000, "ASUS N50Vm", ALC663_ASUS_MODE1),
-	SND_PCI_QUIRK(0x1043, 0x19b3, "ASUS F7Z", ALC663_ASUS_MODE1),
-	SND_PCI_QUIRK(0x1043, 0x1953, "ASUS NB", ALC663_ASUS_MODE1),
-	SND_PCI_QUIRK(0x1043, 0x19a3, "ASUS NB", ALC663_ASUS_MODE1),
-	SND_PCI_QUIRK(0x1043, 0x11d3, "ASUS NB", ALC663_ASUS_MODE1),
-	SND_PCI_QUIRK(0x1043, 0x1203, "ASUS NB", ALC663_ASUS_MODE1),
-	SND_PCI_QUIRK(0x1043, 0x19e3, "ASUS NB", ALC663_ASUS_MODE1),
-	SND_PCI_QUIRK(0x1043, 0x1993, "ASUS N20", ALC663_ASUS_MODE1),
-	SND_PCI_QUIRK(0x1043, 0x19c3, "ASUS F5Z/F6x", ALC662_ASUS_MODE2),
-	SND_PCI_QUIRK(0x1043, 0x1339, "ASUS NB", ALC662_ASUS_MODE2),
-	SND_PCI_QUIRK(0x1043, 0x1913, "ASUS NB", ALC662_ASUS_MODE2),
-	SND_PCI_QUIRK(0x1043, 0x1843, "ASUS NB", ALC662_ASUS_MODE2),
-	SND_PCI_QUIRK(0x1043, 0x1813, "ASUS NB", ALC662_ASUS_MODE2),
-	SND_PCI_QUIRK(0x1043, 0x11f3, "ASUS NB", ALC662_ASUS_MODE2),
-	SND_PCI_QUIRK(0x1043, 0x1876, "ASUS NB", ALC662_ASUS_MODE2),
-	SND_PCI_QUIRK(0x1043, 0x1864, "ASUS NB", ALC662_ASUS_MODE2),
-	SND_PCI_QUIRK(0x1043, 0x1783, "ASUS NB", ALC662_ASUS_MODE2),
-	SND_PCI_QUIRK(0x1043, 0x1753, "ASUS NB", ALC662_ASUS_MODE2),
-	SND_PCI_QUIRK(0x1043, 0x16c3, "ASUS NB", ALC662_ASUS_MODE2),
-	SND_PCI_QUIRK(0x1043, 0x1933, "ASUS F80Q", ALC662_ASUS_MODE2),
-	SND_PCI_QUIRK(0x1043, 0x1893, "ASUS M50Vm", ALC663_ASUS_MODE3),
-	SND_PCI_QUIRK(0x1043, 0x11c3, "ASUS M70V", ALC663_ASUS_MODE3),
-	SND_PCI_QUIRK(0x1043, 0x1963, "ASUS X71C", ALC663_ASUS_MODE3),
-	SND_PCI_QUIRK(0x1043, 0x1894, "ASUS X55", ALC663_ASUS_MODE3),
-	SND_PCI_QUIRK(0x1043, 0x1092, "ASUS NB", ALC663_ASUS_MODE3),
-	SND_PCI_QUIRK(0x1043, 0x19f3, "ASUS NB", ALC663_ASUS_MODE4),
-	SND_PCI_QUIRK(0x1043, 0x1823, "ASUS NB", ALC663_ASUS_MODE5),
-	SND_PCI_QUIRK(0x1043, 0x1833, "ASUS NB", ALC663_ASUS_MODE6),
-	SND_PCI_QUIRK(0x1043, 0x1763, "ASUS NB", ALC663_ASUS_MODE6),
-	SND_PCI_QUIRK(0x1043, 0x1765, "ASUS NB", ALC663_ASUS_MODE6),
+	SND_PCI_QUIRK(0x105b, 0x0cd6, "Foxconn", ALC662_ECS),
 	SND_PCI_QUIRK(0x105b, 0x0d47, "Foxconn 45CMX/45GMX/45CMX-K",
 		      ALC662_3ST_6ch_DIG),
-	SND_PCI_QUIRK(0x17aa, 0x101e, "Lenovo", ALC662_LENOVO_101E),
-	SND_PCI_QUIRK(0x1019, 0x9087, "ECS", ALC662_ECS),
-	SND_PCI_QUIRK(0x105b, 0x0cd6, "Foxconn", ALC662_ECS),
 	SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte 945GCM-S2L",
 		      ALC662_3ST_6ch_DIG),
 	SND_PCI_QUIRK(0x1565, 0x820f, "Biostar TA780G M2+", ALC662_3ST_6ch_DIG),
+	SND_PCI_QUIRK(0x17aa, 0x101e, "Lenovo", ALC662_LENOVO_101E),
 	SND_PCI_QUIRK(0x1849, 0x3662, "ASROCK K10N78FullHD-hSLI R3.0",
 					ALC662_3ST_6ch_DIG),
-	SND_PCI_QUIRK(0x1854, 0x2000, "ASUS H13-2000", ALC663_ASUS_H13),
-	SND_PCI_QUIRK(0x1854, 0x2001, "ASUS H13-2001", ALC663_ASUS_H13),
-	SND_PCI_QUIRK(0x1854, 0x2002, "ASUS H13-2002", ALC663_ASUS_H13),
+	SND_PCI_QUIRK_MASK(0x1854, 0xf000, 0x2000, "ASUS H13-200x",
+			   ALC663_ASUS_H13),
 	{}
 };
 
@@ -16357,7 +16532,7 @@
 
 	if (alc880_is_fixed_pin(pin)) {
 		nid = alc880_idx_to_dac(alc880_fixed_pin_idx(pin));
-                /* printk("DAC nid=%x\n",nid); */
+		/* printk(KERN_DEBUG "DAC nid=%x\n",nid); */
 		/* specify the DAC as the extra output */
 		if (!spec->multiout.hp_nid)
 			spec->multiout.hp_nid = nid;
@@ -16391,7 +16566,7 @@
 static int alc662_auto_create_analog_input_ctls(struct alc_spec *spec,
 						const struct auto_pin_cfg *cfg)
 {
-	struct hda_input_mux *imux = &spec->private_imux;
+	struct hda_input_mux *imux = &spec->private_imux[0];
 	int i, err, idx;
 
 	for (i = 0; i < AUTO_PIN_LAST; i++) {
@@ -16515,14 +16690,14 @@
 
 	spec->multiout.max_channels = spec->multiout.num_dacs * 2;
 
-	if (spec->autocfg.dig_out_pin)
+	if (spec->autocfg.dig_outs)
 		spec->multiout.dig_out_nid = ALC880_DIGOUT_NID;
 
 	if (spec->kctls.list)
 		add_mixer(spec, spec->kctls.list);
 
 	spec->num_mux_defs = 1;
-	spec->input_mux = &spec->private_imux;
+	spec->input_mux = &spec->private_imux[0];
 
 	add_verb(spec, alc662_auto_init_verbs);
 	if (codec->vendor_id == 0x10ec0663)
@@ -16584,6 +16759,12 @@
 		}
 	}
 
+	err = snd_hda_attach_beep_device(codec, 0x1);
+	if (err < 0) {
+		alc_free(codec);
+		return err;
+	}
+
 	if (board_config != ALC662_AUTO)
 		setup_preset(spec, &alc662_presets[board_config]);
 
@@ -16607,10 +16788,11 @@
 	spec->adc_nids = alc662_adc_nids;
 	spec->num_adc_nids = ARRAY_SIZE(alc662_adc_nids);
 	spec->capsrc_nids = alc662_capsrc_nids;
-	spec->is_mix_capture = 1;
+	spec->capture_style = CAPT_MIX;
 
 	if (!spec->cap_mixer)
 		set_capture_mixer(spec);
+	set_beep_amp(spec, 0x0b, 0x05, HDA_INPUT);
 
 	spec->vmaster_nid = 0x02;
 
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 8027edf..aeb5d21 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -66,6 +66,7 @@
 	STAC_9205_DELL_M42,
 	STAC_9205_DELL_M43,
 	STAC_9205_DELL_M44,
+	STAC_9205_EAPD,
 	STAC_9205_MODELS
 };
 
@@ -82,6 +83,7 @@
 enum {
 	STAC_92HD83XXX_REF,
 	STAC_92HD83XXX_PWR_REF,
+	STAC_DELL_S14,
 	STAC_92HD83XXX_MODELS
 };
 
@@ -167,6 +169,7 @@
 	unsigned int alt_switch: 1;
 	unsigned int hp_detect: 1;
 	unsigned int spdif_mute: 1;
+	unsigned int check_volume_offset:1;
 
 	/* gpio lines */
 	unsigned int eapd_mask;
@@ -203,6 +206,8 @@
 	hda_nid_t hp_dacs[5];
 	hda_nid_t speaker_dacs[5];
 
+	int volume_offset;
+
 	/* capture */
 	hda_nid_t *adc_nids;
 	unsigned int num_adcs;
@@ -400,6 +405,10 @@
         0x12, 0x13,
 };
 
+static hda_nid_t stac927x_slave_dig_outs[2] = {
+	0x1f, 0,
+};
+
 static hda_nid_t stac927x_adc_nids[3] = {
         0x07, 0x08, 0x09
 };
@@ -472,15 +481,21 @@
 	0x14, 0x22, 0x23
 };
 
-static hda_nid_t stac92hd83xxx_pin_nids[14] = {
+static hda_nid_t stac92hd83xxx_pin_nids[10] = {
 	0x0a, 0x0b, 0x0c, 0x0d, 0x0e,
-	0x0f, 0x10, 0x11, 0x12, 0x13,
-	0x1d, 0x1e, 0x1f, 0x20
+	0x0f, 0x10, 0x11, 0x1f, 0x20,
 };
-static hda_nid_t stac92hd71bxx_pin_nids[11] = {
+
+#define STAC92HD71BXX_NUM_PINS 13
+static hda_nid_t stac92hd71bxx_pin_nids_4port[STAC92HD71BXX_NUM_PINS] = {
+	0x0a, 0x0b, 0x0c, 0x0d, 0x00,
+	0x00, 0x14, 0x18, 0x19, 0x1e,
+	0x1f, 0x20, 0x27
+};
+static hda_nid_t stac92hd71bxx_pin_nids_6port[STAC92HD71BXX_NUM_PINS] = {
 	0x0a, 0x0b, 0x0c, 0x0d, 0x0e,
 	0x0f, 0x14, 0x18, 0x19, 0x1e,
-	0x1f,
+	0x1f, 0x20, 0x27
 };
 
 static hda_nid_t stac927x_pin_nids[14] = {
@@ -842,9 +857,9 @@
 };
 
 static struct hda_verb stac92hd83xxx_core_init[] = {
-	{ 0xa, AC_VERB_SET_CONNECT_SEL, 0x0},
-	{ 0xb, AC_VERB_SET_CONNECT_SEL, 0x0},
-	{ 0xd, AC_VERB_SET_CONNECT_SEL, 0x1},
+	{ 0xa, AC_VERB_SET_CONNECT_SEL, 0x1},
+	{ 0xb, AC_VERB_SET_CONNECT_SEL, 0x1},
+	{ 0xd, AC_VERB_SET_CONNECT_SEL, 0x0},
 
 	/* power state controls amps */
 	{ 0x01, AC_VERB_SET_EAPD, 1 << 2},
@@ -854,26 +869,25 @@
 static struct hda_verb stac92hd71bxx_core_init[] = {
 	/* set master volume and direct control */
 	{ 0x28, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
-	/* unmute right and left channels for nodes 0x0a, 0xd, 0x0f */
-	{ 0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-	{ 0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-	{ 0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
 	{}
 };
 
-#define HD_DISABLE_PORTF 2
+#define HD_DISABLE_PORTF 1
 static struct hda_verb stac92hd71bxx_analog_core_init[] = {
 	/* start of config #1 */
 
 	/* connect port 0f to audio mixer */
 	{ 0x0f, AC_VERB_SET_CONNECT_SEL, 0x2},
-	/* unmute right and left channels for node 0x0f */
-	{ 0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
 	/* start of config #2 */
 
 	/* set master volume and direct control */
 	{ 0x28, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
-	/* unmute right and left channels for nodes 0x0a, 0xd */
+	{}
+};
+
+static struct hda_verb stac92hd71bxx_unmute_core_init[] = {
+	/* unmute right and left channels for nodes 0x0f, 0xa, 0x0d */
+	{ 0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
 	{ 0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
 	{ 0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
 	{}
@@ -954,16 +968,6 @@
 		.private_value = HDA_COMPOSE_AMP_VAL(nid, chs, idx, dir) \
 	}
 
-#define STAC_INPUT_SOURCE(cnt) \
-	{ \
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
-		.name = "Input Source", \
-		.count = cnt, \
-		.info = stac92xx_mux_enum_info, \
-		.get = stac92xx_mux_enum_get, \
-		.put = stac92xx_mux_enum_put, \
-	}
-
 #define STAC_ANALOG_LOOPBACK(verb_read, verb_write, cnt) \
 	{ \
 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
@@ -978,7 +982,6 @@
 static struct snd_kcontrol_new stac9200_mixer[] = {
 	HDA_CODEC_VOLUME("Master Playback Volume", 0xb, 0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Master Playback Switch", 0xb, 0, HDA_OUTPUT),
-	STAC_INPUT_SOURCE(1),
 	HDA_CODEC_VOLUME("Capture Volume", 0x0a, 0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Capture Switch", 0x0a, 0, HDA_OUTPUT),
 	{ } /* end */
@@ -1094,7 +1097,6 @@
 };
 
 static struct snd_kcontrol_new stac92hd71bxx_analog_mixer[] = {
-	STAC_INPUT_SOURCE(2),
 	STAC_ANALOG_LOOPBACK(0xFA0, 0x7A0, 2),
 
 	HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x1c, 0x0, HDA_OUTPUT),
@@ -1123,7 +1125,6 @@
 };
 
 static struct snd_kcontrol_new stac92hd71bxx_mixer[] = {
-	STAC_INPUT_SOURCE(2),
 	STAC_ANALOG_LOOPBACK(0xFA0, 0x7A0, 2),
 
 	HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x1c, 0x0, HDA_OUTPUT),
@@ -1137,14 +1138,12 @@
 static struct snd_kcontrol_new stac925x_mixer[] = {
 	HDA_CODEC_VOLUME("Master Playback Volume", 0x0e, 0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Master Playback Switch", 0x0e, 0, HDA_OUTPUT),
-	STAC_INPUT_SOURCE(1),
 	HDA_CODEC_VOLUME("Capture Volume", 0x09, 0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Capture Switch", 0x14, 0, HDA_OUTPUT),
 	{ } /* end */
 };
 
 static struct snd_kcontrol_new stac9205_mixer[] = {
-	STAC_INPUT_SOURCE(2),
 	STAC_ANALOG_LOOPBACK(0xFE0, 0x7E0, 1),
 
 	HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x1b, 0x0, HDA_INPUT),
@@ -1157,7 +1156,6 @@
 
 /* This needs to be generated dynamically based on sequence */
 static struct snd_kcontrol_new stac922x_mixer[] = {
-	STAC_INPUT_SOURCE(2),
 	HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x17, 0x0, HDA_INPUT),
 	HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x17, 0x0, HDA_INPUT),
 
@@ -1168,7 +1166,6 @@
 
 
 static struct snd_kcontrol_new stac927x_mixer[] = {
-	STAC_INPUT_SOURCE(3),
 	STAC_ANALOG_LOOPBACK(0xFEB, 0x7EB, 1),
 
 	HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x18, 0x0, HDA_INPUT),
@@ -1294,6 +1291,8 @@
 		unsigned int vmaster_tlv[4];
 		snd_hda_set_vmaster_tlv(codec, spec->multiout.dac_nids[0],
 					HDA_OUTPUT, vmaster_tlv);
+		/* correct volume offset */
+		vmaster_tlv[2] += vmaster_tlv[3] * spec->volume_offset;
 		err = snd_hda_add_vmaster(codec, "Master Playback Volume",
 					  vmaster_tlv, slave_vols);
 		if (err < 0)
@@ -1511,6 +1510,8 @@
 	/* SigmaTel reference board */
 	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668,
 		      "DFI LanParty", STAC_REF),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101,
+		      "DFI LanParty", STAC_REF),
 	/* Dell laptops have BIOS problem */
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01a8,
 		      "unknown Dell", STAC_9200_DELL_D21),
@@ -1660,6 +1661,7 @@
 static struct snd_pci_quirk stac925x_cfg_tbl[] = {
 	/* SigmaTel reference board */
 	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668, "DFI LanParty", STAC_REF),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101, "DFI LanParty", STAC_REF),
 	SND_PCI_QUIRK(0x8384, 0x7632, "Stac9202 Reference Board", STAC_REF),
 
 	/* Default table for unknown ID */
@@ -1703,6 +1705,8 @@
 	/* SigmaTel reference board */
 	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668,
 				"DFI LanParty", STAC_92HD73XX_REF),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101,
+				"DFI LanParty", STAC_92HD73XX_REF),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0254,
 				"Dell Studio 1535", STAC_DELL_M6_DMIC),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0255,
@@ -1726,52 +1730,67 @@
 	{} /* terminator */
 };
 
-static unsigned int ref92hd83xxx_pin_configs[14] = {
+static unsigned int ref92hd83xxx_pin_configs[10] = {
 	0x02214030, 0x02211010, 0x02a19020, 0x02170130,
 	0x01014050, 0x01819040, 0x01014020, 0x90a3014e,
-	0x40f000f0, 0x40f000f0, 0x40f000f0, 0x40f000f0,
 	0x01451160, 0x98560170,
 };
 
+static unsigned int dell_s14_pin_configs[10] = {
+	0x02214030, 0x02211010, 0x02a19020, 0x01014050,
+	0x40f000f0, 0x01819040, 0x40f000f0, 0x90a60160,
+	0x40f000f0, 0x40f000f0,
+};
+
 static unsigned int *stac92hd83xxx_brd_tbl[STAC_92HD83XXX_MODELS] = {
 	[STAC_92HD83XXX_REF] = ref92hd83xxx_pin_configs,
 	[STAC_92HD83XXX_PWR_REF] = ref92hd83xxx_pin_configs,
+	[STAC_DELL_S14] = dell_s14_pin_configs,
 };
 
 static const char *stac92hd83xxx_models[STAC_92HD83XXX_MODELS] = {
 	[STAC_92HD83XXX_REF] = "ref",
 	[STAC_92HD83XXX_PWR_REF] = "mic-ref",
+	[STAC_DELL_S14] = "dell-s14",
 };
 
 static struct snd_pci_quirk stac92hd83xxx_cfg_tbl[] = {
 	/* SigmaTel reference board */
 	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668,
 		      "DFI LanParty", STAC_92HD83XXX_REF),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101,
+		      "DFI LanParty", STAC_92HD83XXX_REF),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02ba,
+		      "unknown Dell", STAC_DELL_S14),
 	{} /* terminator */
 };
 
-static unsigned int ref92hd71bxx_pin_configs[11] = {
+static unsigned int ref92hd71bxx_pin_configs[STAC92HD71BXX_NUM_PINS] = {
 	0x02214030, 0x02a19040, 0x01a19020, 0x01014010,
 	0x0181302e, 0x01014010, 0x01019020, 0x90a000f0,
-	0x90a000f0, 0x01452050, 0x01452050,
+	0x90a000f0, 0x01452050, 0x01452050, 0x00000000,
+	0x00000000
 };
 
-static unsigned int dell_m4_1_pin_configs[11] = {
+static unsigned int dell_m4_1_pin_configs[STAC92HD71BXX_NUM_PINS] = {
 	0x0421101f, 0x04a11221, 0x40f000f0, 0x90170110,
 	0x23a1902e, 0x23014250, 0x40f000f0, 0x90a000f0,
-	0x40f000f0, 0x4f0000f0, 0x4f0000f0,
+	0x40f000f0, 0x4f0000f0, 0x4f0000f0, 0x00000000,
+	0x00000000
 };
 
-static unsigned int dell_m4_2_pin_configs[11] = {
+static unsigned int dell_m4_2_pin_configs[STAC92HD71BXX_NUM_PINS] = {
 	0x0421101f, 0x04a11221, 0x90a70330, 0x90170110,
 	0x23a1902e, 0x23014250, 0x40f000f0, 0x40f000f0,
-	0x40f000f0, 0x044413b0, 0x044413b0,
+	0x40f000f0, 0x044413b0, 0x044413b0, 0x00000000,
+	0x00000000
 };
 
-static unsigned int dell_m4_3_pin_configs[11] = {
+static unsigned int dell_m4_3_pin_configs[STAC92HD71BXX_NUM_PINS] = {
 	0x0421101f, 0x04a11221, 0x90a70330, 0x90170110,
 	0x40f000f0, 0x40f000f0, 0x40f000f0, 0x90a000f0,
-	0x40f000f0, 0x044413b0, 0x044413b0,
+	0x40f000f0, 0x044413b0, 0x044413b0, 0x00000000,
+	0x00000000
 };
 
 static unsigned int *stac92hd71bxx_brd_tbl[STAC_92HD71BXX_MODELS] = {
@@ -1796,6 +1815,8 @@
 	/* SigmaTel reference board */
 	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668,
 		      "DFI LanParty", STAC_92HD71BXX_REF),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101,
+		      "DFI LanParty", STAC_92HD71BXX_REF),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30f2,
 		      "HP dv5", STAC_HP_M4),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30f4,
@@ -1988,6 +2009,8 @@
 	/* SigmaTel reference board */
 	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668,
 		      "DFI LanParty", STAC_D945_REF),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101,
+		      "DFI LanParty", STAC_D945_REF),
 	/* Intel 945G based systems */
 	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x0101,
 		      "Intel D945G", STAC_D945GTP3),
@@ -2041,6 +2064,9 @@
 		      "Intel D945P", STAC_D945GTP3),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x0707,
 		      "Intel D945P", STAC_D945GTP5),
+	/* other intel */
+	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x0204,
+		      "Intel D945", STAC_D945_REF),
 	/* other systems  */
 	/* Apple Intel Mac (Mac Mini, MacBook, MacBook Pro...) */
 	SND_PCI_QUIRK(0x8384, 0x7680,
@@ -2065,31 +2091,7 @@
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01d7,
 		      "Dell XPS M1210", STAC_922X_DELL_M82),
 	/* ECS/PC Chips boards */
-	SND_PCI_QUIRK(0x1019, 0x2144,
-		      "ECS/PC chips", STAC_ECS_202),
-	SND_PCI_QUIRK(0x1019, 0x2608,
-		      "ECS/PC chips", STAC_ECS_202),
-	SND_PCI_QUIRK(0x1019, 0x2633,
-		      "ECS/PC chips P17G/1333", STAC_ECS_202),
-	SND_PCI_QUIRK(0x1019, 0x2811,
-		      "ECS/PC chips", STAC_ECS_202),
-	SND_PCI_QUIRK(0x1019, 0x2812,
-		      "ECS/PC chips", STAC_ECS_202),
-	SND_PCI_QUIRK(0x1019, 0x2813,
-		      "ECS/PC chips", STAC_ECS_202),
-	SND_PCI_QUIRK(0x1019, 0x2814,
-		      "ECS/PC chips", STAC_ECS_202),
-	SND_PCI_QUIRK(0x1019, 0x2815,
-		      "ECS/PC chips", STAC_ECS_202),
-	SND_PCI_QUIRK(0x1019, 0x2816,
-		      "ECS/PC chips", STAC_ECS_202),
-	SND_PCI_QUIRK(0x1019, 0x2817,
-		      "ECS/PC chips", STAC_ECS_202),
-	SND_PCI_QUIRK(0x1019, 0x2818,
-		      "ECS/PC chips", STAC_ECS_202),
-	SND_PCI_QUIRK(0x1019, 0x2819,
-		      "ECS/PC chips", STAC_ECS_202),
-	SND_PCI_QUIRK(0x1019, 0x2820,
+	SND_PCI_QUIRK_MASK(0x1019, 0xf000, 0x2000,
 		      "ECS/PC chips", STAC_ECS_202),
 	{} /* terminator */
 };
@@ -2144,26 +2146,16 @@
 	/* SigmaTel reference board */
 	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668,
 		      "DFI LanParty", STAC_D965_REF),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101,
+		      "DFI LanParty", STAC_D965_REF),
 	 /* Intel 946 based systems */
 	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x3d01, "Intel D946", STAC_D965_3ST),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0xa301, "Intel D946", STAC_D965_3ST),
 	/* 965 based 3 stack systems */
-	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2116, "Intel D965", STAC_D965_3ST),
-	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2115, "Intel D965", STAC_D965_3ST),
-	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2114, "Intel D965", STAC_D965_3ST),
-	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2113, "Intel D965", STAC_D965_3ST),
-	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2112, "Intel D965", STAC_D965_3ST),
-	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2111, "Intel D965", STAC_D965_3ST),
-	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2110, "Intel D965", STAC_D965_3ST),
-	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2009, "Intel D965", STAC_D965_3ST),
-	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2008, "Intel D965", STAC_D965_3ST),
-	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2007, "Intel D965", STAC_D965_3ST),
-	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2006, "Intel D965", STAC_D965_3ST),
-	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2005, "Intel D965", STAC_D965_3ST),
-	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2004, "Intel D965", STAC_D965_3ST),
-	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2003, "Intel D965", STAC_D965_3ST),
-	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2002, "Intel D965", STAC_D965_3ST),
-	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2001, "Intel D965", STAC_D965_3ST),
+	SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_INTEL, 0xff00, 0x2100,
+			   "Intel D965", STAC_D965_3ST),
+	SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_INTEL, 0xff00, 0x2000,
+			   "Intel D965", STAC_D965_3ST),
 	/* Dell 3 stack systems */
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL,  0x01f7, "Dell XPS M1730", STAC_DELL_3ST),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL,  0x01dd, "Dell Dimension E520", STAC_DELL_3ST),
@@ -2179,15 +2171,10 @@
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL,  0x02ff, "Dell     ", STAC_DELL_BIOS),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL,  0x0209, "Dell XPS 1330", STAC_DELL_BIOS),
 	/* 965 based 5 stack systems */
-	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2301, "Intel D965", STAC_D965_5ST),
-	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2302, "Intel D965", STAC_D965_5ST),
-	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2303, "Intel D965", STAC_D965_5ST),
-	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2304, "Intel D965", STAC_D965_5ST),
-	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2305, "Intel D965", STAC_D965_5ST),
-	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2501, "Intel D965", STAC_D965_5ST),
-	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2502, "Intel D965", STAC_D965_5ST),
-	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2503, "Intel D965", STAC_D965_5ST),
-	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2504, "Intel D965", STAC_D965_5ST),
+	SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_INTEL, 0xff00, 0x2300,
+			   "Intel D965", STAC_D965_5ST),
+	SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_INTEL, 0xff00, 0x2500,
+			   "Intel D965", STAC_D965_5ST),
 	{} /* terminator */
 };
 
@@ -2240,6 +2227,7 @@
 	[STAC_9205_DELL_M42] = dell_9205_m42_pin_configs,
 	[STAC_9205_DELL_M43] = dell_9205_m43_pin_configs,
 	[STAC_9205_DELL_M44] = dell_9205_m44_pin_configs,
+	[STAC_9205_EAPD] = NULL,
 };
 
 static const char *stac9205_models[STAC_9205_MODELS] = {
@@ -2247,12 +2235,16 @@
 	[STAC_9205_DELL_M42] = "dell-m42",
 	[STAC_9205_DELL_M43] = "dell-m43",
 	[STAC_9205_DELL_M44] = "dell-m44",
+	[STAC_9205_EAPD] = "eapd",
 };
 
 static struct snd_pci_quirk stac9205_cfg_tbl[] = {
 	/* SigmaTel reference board */
 	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668,
 		      "DFI LanParty", STAC_9205_REF),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101,
+		      "DFI LanParty", STAC_9205_REF),
+	/* Dell */
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01f1,
 		      "unknown Dell", STAC_9205_DELL_M42),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01f2,
@@ -2283,6 +2275,8 @@
 		      "Dell Inspiron", STAC_9205_DELL_M44),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0228,
 		      "Dell Vostro 1500", STAC_9205_DELL_M42),
+	/* Gateway */
+	SND_PCI_QUIRK(0x107b, 0x0565, "Gateway T1616", STAC_9205_EAPD),
 	{} /* terminator */
 };
 
@@ -2300,7 +2294,9 @@
 	for (i = 0; i < spec->num_pins; i++) {
 		hda_nid_t nid = spec->pin_nids[i];
 		unsigned int pin_cfg;
-		
+
+		if (!nid)
+			continue;
 		pin_cfg = snd_hda_codec_read(codec, nid, 0, 
 			AC_VERB_GET_CONFIG_DEFAULT, 0x00);	
 		snd_printdd(KERN_INFO "hda_codec: pin nid %2.2x bios pin config %8.8x\n",
@@ -2343,8 +2339,9 @@
  		return;
 
 	for (i = 0; i < spec->num_pins; i++)
-		stac92xx_set_config_reg(codec, spec->pin_nids[i],
-					spec->pin_configs[i]);
+		if (spec->pin_nids[i] && spec->pin_configs[i])
+			stac92xx_set_config_reg(codec, spec->pin_nids[i],
+						spec->pin_configs[i]);
 }
 
 static int stac_save_pin_cfgs(struct hda_codec *codec, unsigned int *pins)
@@ -2567,7 +2564,7 @@
 		codec->num_pcms++;
 		info++;
 		info->name = "STAC92xx Digital";
-		info->pcm_type = HDA_PCM_TYPE_SPDIF;
+		info->pcm_type = spec->autocfg.dig_out_type[0];
 		if (spec->multiout.dig_out_nid) {
 			info->stream[SNDRV_PCM_STREAM_PLAYBACK] = stac92xx_pcm_digital_playback;
 			info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->multiout.dig_out_nid;
@@ -2759,22 +2756,37 @@
 };
 
 /* add dynamic controls */
-static int stac92xx_add_control_temp(struct sigmatel_spec *spec,
-				     struct snd_kcontrol_new *ktemp,
-				     int idx, const char *name,
-				     unsigned long val)
+static struct snd_kcontrol_new *
+stac_control_new(struct sigmatel_spec *spec,
+		 struct snd_kcontrol_new *ktemp,
+		 const char *name)
 {
 	struct snd_kcontrol_new *knew;
 
 	snd_array_init(&spec->kctls, sizeof(*knew), 32);
 	knew = snd_array_new(&spec->kctls);
 	if (!knew)
-		return -ENOMEM;
+		return NULL;
 	*knew = *ktemp;
-	knew->index = idx;
 	knew->name = kstrdup(name, GFP_KERNEL);
-	if (!knew->name)
+	if (!knew->name) {
+		/* roolback */
+		memset(knew, 0, sizeof(*knew));
+		spec->kctls.alloced--;
+		return NULL;
+	}
+	return knew;
+}
+
+static int stac92xx_add_control_temp(struct sigmatel_spec *spec,
+				     struct snd_kcontrol_new *ktemp,
+				     int idx, const char *name,
+				     unsigned long val)
+{
+	struct snd_kcontrol_new *knew = stac_control_new(spec, ktemp, name);
+	if (!knew)
 		return -ENOMEM;
+	knew->index = idx;
 	knew->private_value = val;
 	return 0;
 }
@@ -2796,6 +2808,29 @@
 	return stac92xx_add_control_idx(spec, type, 0, name, val);
 }
 
+static struct snd_kcontrol_new stac_input_src_temp = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "Input Source",
+	.info = stac92xx_mux_enum_info,
+	.get = stac92xx_mux_enum_get,
+	.put = stac92xx_mux_enum_put,
+};
+
+static int stac92xx_add_input_source(struct sigmatel_spec *spec)
+{
+	struct snd_kcontrol_new *knew;
+	struct hda_input_mux *imux = &spec->private_imux;
+
+	if (!spec->num_adcs || imux->num_items <= 1)
+		return 0; /* no need for input source control */
+	knew = stac_control_new(spec, &stac_input_src_temp,
+				stac_input_src_temp.name);
+	if (!knew)
+		return -ENOMEM;
+	knew->count = spec->num_adcs;
+	return 0;
+}
+
 /* check whether the line-input can be used as line-out */
 static hda_nid_t check_line_out_switch(struct hda_codec *codec)
 {
@@ -2994,14 +3029,34 @@
 }
 
 /* create volume control/switch for the given prefx type */
-static int create_controls(struct sigmatel_spec *spec, const char *pfx, hda_nid_t nid, int chs)
+static int create_controls(struct hda_codec *codec, const char *pfx,
+			   hda_nid_t nid, int chs)
 {
+	struct sigmatel_spec *spec = codec->spec;
 	char name[32];
 	int err;
 
+	if (!spec->check_volume_offset) {
+		unsigned int caps, step, nums, db_scale;
+		caps = query_amp_caps(codec, nid, HDA_OUTPUT);
+		step = (caps & AC_AMPCAP_STEP_SIZE) >>
+			AC_AMPCAP_STEP_SIZE_SHIFT;
+		step = (step + 1) * 25; /* in .01dB unit */
+		nums = (caps & AC_AMPCAP_NUM_STEPS) >>
+			AC_AMPCAP_NUM_STEPS_SHIFT;
+		db_scale = nums * step;
+		/* if dB scale is over -64dB, and finer enough,
+		 * let's reduce it to half
+		 */
+		if (db_scale > 6400 && nums >= 0x1f)
+			spec->volume_offset = nums / 2;
+		spec->check_volume_offset = 1;
+	}
+
 	sprintf(name, "%s Playback Volume", pfx);
 	err = stac92xx_add_control(spec, STAC_CTL_WIDGET_VOL, name,
-				   HDA_COMPOSE_AMP_VAL(nid, chs, 0, HDA_OUTPUT));
+		HDA_COMPOSE_AMP_VAL_OFS(nid, chs, 0, HDA_OUTPUT,
+					spec->volume_offset));
 	if (err < 0)
 		return err;
 	sprintf(name, "%s Playback Switch", pfx);
@@ -3067,10 +3122,10 @@
 		nid = spec->multiout.dac_nids[i];
 		if (i == 2) {
 			/* Center/LFE */
-			err = create_controls(spec, "Center", nid, 1);
+			err = create_controls(codec, "Center", nid, 1);
 			if (err < 0)
 				return err;
-			err = create_controls(spec, "LFE", nid, 2);
+			err = create_controls(codec, "LFE", nid, 2);
 			if (err < 0)
 				return err;
 
@@ -3098,7 +3153,7 @@
 					break;
 				}
 			}
-			err = create_controls(spec, name, nid, 3);
+			err = create_controls(codec, name, nid, 3);
 			if (err < 0)
 				return err;
 		}
@@ -3153,7 +3208,7 @@
 		nid = spec->hp_dacs[i];
 		if (!nid)
 			continue;
-		err = create_controls(spec, pfxs[nums++], nid, 3);
+		err = create_controls(codec, pfxs[nums++], nid, 3);
 		if (err < 0)
 			return err;
 	}
@@ -3167,7 +3222,7 @@
 		nid = spec->speaker_dacs[i];
 		if (!nid)
 			continue;
-		err = create_controls(spec, pfxs[nums++], nid, 3);
+		err = create_controls(codec, pfxs[nums++], nid, 3);
 		if (err < 0)
 			return err;
 	}
@@ -3661,11 +3716,15 @@
 			return err;
 	}
 
+	err = stac92xx_add_input_source(spec);
+	if (err < 0)
+		return err;
+
 	spec->multiout.max_channels = spec->multiout.num_dacs * 2;
 	if (spec->multiout.max_channels > 2)
 		spec->surr_switch = 1;
 
-	if (spec->autocfg.dig_out_pin)
+	if (spec->autocfg.dig_outs)
 		spec->multiout.dig_out_nid = dig_out;
 	if (dig_in && spec->autocfg.dig_in_pin)
 		spec->dig_in_nid = dig_in;
@@ -3743,7 +3802,7 @@
 	}
 
 	if (lfe_pin) {
-		err = create_controls(spec, "LFE", lfe_pin, 1);
+		err = create_controls(codec, "LFE", lfe_pin, 1);
 		if (err < 0)
 			return err;
 	}
@@ -3774,7 +3833,11 @@
 			return err;
 	}
 
-	if (spec->autocfg.dig_out_pin)
+	err = stac92xx_add_input_source(spec);
+	if (err < 0)
+		return err;
+
+	if (spec->autocfg.dig_outs)
 		spec->multiout.dig_out_nid = 0x05;
 	if (spec->autocfg.dig_in_pin)
 		spec->dig_in_nid = 0x04;
@@ -4024,8 +4087,8 @@
 	for (i = 0; i < spec->num_dmics; i++)
 		stac92xx_auto_set_pinctl(codec, spec->dmic_nids[i],
 					AC_PINCTL_IN_EN);
-	if (cfg->dig_out_pin)
-		stac92xx_auto_set_pinctl(codec, cfg->dig_out_pin,
+	if (cfg->dig_out_pins[0])
+		stac92xx_auto_set_pinctl(codec, cfg->dig_out_pins[0],
 					 AC_PINCTL_OUT_EN);
 	if (cfg->dig_in_pin)
 		stac92xx_auto_set_pinctl(codec, cfg->dig_in_pin,
@@ -4119,7 +4182,9 @@
 static void stac92xx_set_pinctl(struct hda_codec *codec, hda_nid_t nid,
 				unsigned int flag)
 {
-	unsigned int pin_ctl = snd_hda_codec_read(codec, nid,
+	unsigned int old_ctl, pin_ctl;
+
+	pin_ctl = snd_hda_codec_read(codec, nid,
 			0, AC_VERB_GET_PIN_WIDGET_CONTROL, 0x00);
 
 	if (pin_ctl & AC_PINCTL_IN_EN) {
@@ -4133,14 +4198,17 @@
 			return;
 	}
 
+	old_ctl = pin_ctl;
 	/* if setting pin direction bits, clear the current
 	   direction bits first */
 	if (flag & (AC_PINCTL_IN_EN | AC_PINCTL_OUT_EN))
 		pin_ctl &= ~(AC_PINCTL_IN_EN | AC_PINCTL_OUT_EN);
 	
-	snd_hda_codec_write_cache(codec, nid, 0,
-			AC_VERB_SET_PIN_WIDGET_CONTROL,
-			pin_ctl | flag);
+	pin_ctl |= flag;
+	if (old_ctl != pin_ctl)
+		snd_hda_codec_write_cache(codec, nid, 0,
+					  AC_VERB_SET_PIN_WIDGET_CONTROL,
+					  pin_ctl);
 }
 
 static void stac92xx_reset_pinctl(struct hda_codec *codec, hda_nid_t nid,
@@ -4148,9 +4216,10 @@
 {
 	unsigned int pin_ctl = snd_hda_codec_read(codec, nid,
 			0, AC_VERB_GET_PIN_WIDGET_CONTROL, 0x00);
-	snd_hda_codec_write_cache(codec, nid, 0,
-			AC_VERB_SET_PIN_WIDGET_CONTROL,
-			pin_ctl & ~flag);
+	if (pin_ctl & flag)
+		snd_hda_codec_write_cache(codec, nid, 0,
+					  AC_VERB_SET_PIN_WIDGET_CONTROL,
+					  pin_ctl & ~flag);
 }
 
 static int get_pin_presence(struct hda_codec *codec, hda_nid_t nid)
@@ -4771,6 +4840,7 @@
 	hda_nid_t conn[STAC92HD83_DAC_COUNT + 1];
 	int err;
 	int num_dacs;
+	hda_nid_t nid;
 
 	spec  = kzalloc(sizeof(*spec), GFP_KERNEL);
 	if (spec == NULL)
@@ -4789,15 +4859,6 @@
 	spec->num_pwrs = ARRAY_SIZE(stac92hd83xxx_pwr_nids);
 	spec->multiout.dac_nids = spec->dac_nids;
 
-
-	/* set port 0xe to select the last DAC
-	 */
-	num_dacs = snd_hda_get_connections(codec, 0x0e,
-		conn, STAC92HD83_DAC_COUNT + 1) - 1;
-
-	snd_hda_codec_write_cache(codec, 0xe, 0,
-		AC_VERB_SET_CONNECT_SEL, num_dacs);
-
 	spec->init = stac92hd83xxx_core_init;
 	spec->mixer = stac92hd83xxx_mixer;
 	spec->num_pins = ARRAY_SIZE(stac92hd83xxx_pin_nids);
@@ -4849,6 +4910,23 @@
 		return err;
 	}
 
+	switch (spec->board_config) {
+	case STAC_DELL_S14:
+		nid = 0xf;
+		break;
+	default:
+		nid = 0xe;
+		break;
+	}
+
+	num_dacs = snd_hda_get_connections(codec, nid,
+				conn, STAC92HD83_DAC_COUNT + 1) - 1;
+
+	/* set port X to select the last DAC
+	 */
+	snd_hda_codec_write_cache(codec, nid, 0,
+			AC_VERB_SET_CONNECT_SEL, num_dacs);
+
 	codec->patch_ops = stac92xx_patch_ops;
 
 	codec->proc_widget_hook = stac92hd_proc_hook;
@@ -4856,7 +4934,16 @@
 	return 0;
 }
 
-static struct hda_input_mux stac92hd71bxx_dmux = {
+static struct hda_input_mux stac92hd71bxx_dmux_nomixer = {
+	.num_items = 3,
+	.items = {
+		{ "Analog Inputs", 0x00 },
+		{ "Digital Mic 1", 0x02 },
+		{ "Digital Mic 2", 0x03 },
+	}
+};
+
+static struct hda_input_mux stac92hd71bxx_dmux_amixer = {
 	.num_items = 4,
 	.items = {
 		{ "Analog Inputs", 0x00 },
@@ -4866,10 +4953,57 @@
 	}
 };
 
+static int stac92hd71bxx_connected_ports(struct hda_codec *codec,
+					 hda_nid_t *nids, int num_nids)
+{
+	struct sigmatel_spec *spec = codec->spec;
+	int idx, num;
+	unsigned int def_conf;
+
+	for (num = 0; num < num_nids; num++) {
+		for (idx = 0; idx < spec->num_pins; idx++)
+			if (spec->pin_nids[idx] == nids[num])
+				break;
+		if (idx >= spec->num_pins)
+			break;
+		def_conf = get_defcfg_connect(spec->pin_configs[idx]);
+		if (def_conf == AC_JACK_PORT_NONE)
+			break;
+	}
+	return num;
+}
+
+static int stac92hd71bxx_connected_smuxes(struct hda_codec *codec,
+					  hda_nid_t dig0pin)
+{
+	struct sigmatel_spec *spec = codec->spec;
+	int idx;
+
+	for (idx = 0; idx < spec->num_pins; idx++)
+		if (spec->pin_nids[idx] == dig0pin)
+			break;
+	if ((idx + 2) >= spec->num_pins)
+		return 0;
+
+	/* dig1pin case */
+	if (get_defcfg_connect(spec->pin_configs[idx+1]) != AC_JACK_PORT_NONE)
+		return 2;
+
+	/* dig0pin + dig2pin case */
+	if (get_defcfg_connect(spec->pin_configs[idx+2]) != AC_JACK_PORT_NONE)
+		return 2;
+	if (get_defcfg_connect(spec->pin_configs[idx]) != AC_JACK_PORT_NONE)
+		return 1;
+	else
+		return 0;
+}
+
 static int patch_stac92hd71bxx(struct hda_codec *codec)
 {
 	struct sigmatel_spec *spec;
+	struct hda_verb *unmute_init = stac92hd71bxx_unmute_core_init;
 	int err = 0;
+	unsigned int ndmic_nids = 0;
 
 	spec  = kzalloc(sizeof(*spec), GFP_KERNEL);
 	if (spec == NULL)
@@ -4877,11 +5011,21 @@
 
 	codec->spec = spec;
 	codec->patch_ops = stac92xx_patch_ops;
-	spec->num_pins = ARRAY_SIZE(stac92hd71bxx_pin_nids);
+	spec->num_pins = STAC92HD71BXX_NUM_PINS;
+	switch (codec->vendor_id) {
+	case 0x111d76b6:
+	case 0x111d76b7:
+		spec->pin_nids = stac92hd71bxx_pin_nids_4port;
+		break;
+	case 0x111d7603:
+	case 0x111d7608:
+		/* On 92HD75Bx 0x27 isn't a pin nid */
+		spec->num_pins--;
+		/* fallthrough */
+	default:
+		spec->pin_nids = stac92hd71bxx_pin_nids_6port;
+	}
 	spec->num_pwrs = ARRAY_SIZE(stac92hd71bxx_pwr_nids);
-	spec->pin_nids = stac92hd71bxx_pin_nids;
-	memcpy(&spec->private_dimux, &stac92hd71bxx_dmux,
-			sizeof(stac92hd71bxx_dmux));
 	spec->board_config = snd_hda_check_board_config(codec,
 							STAC_92HD71BXX_MODELS,
 							stac92hd71bxx_models,
@@ -4906,16 +5050,34 @@
 		spec->gpio_data = 0x01;
 	}
 
+	spec->dmic_nids = stac92hd71bxx_dmic_nids;
+	spec->dmux_nids = stac92hd71bxx_dmux_nids;
+
 	switch (codec->vendor_id) {
 	case 0x111d76b6: /* 4 Port without Analog Mixer */
 	case 0x111d76b7:
+		unmute_init++;
+		/* fallthru */
 	case 0x111d76b4: /* 6 Port without Analog Mixer */
 	case 0x111d76b5:
+		memcpy(&spec->private_dimux, &stac92hd71bxx_dmux_nomixer,
+		       sizeof(stac92hd71bxx_dmux_nomixer));
 		spec->mixer = stac92hd71bxx_mixer;
 		spec->init = stac92hd71bxx_core_init;
 		codec->slave_dig_outs = stac92hd71bxx_slave_dig_outs;
+		spec->num_dmics = stac92hd71bxx_connected_ports(codec,
+					stac92hd71bxx_dmic_nids,
+					STAC92HD71BXX_NUM_DMICS);
+		if (spec->num_dmics) {
+			spec->num_dmuxes = ARRAY_SIZE(stac92hd71bxx_dmux_nids);
+			spec->dinput_mux = &spec->private_dimux;
+			ndmic_nids = ARRAY_SIZE(stac92hd71bxx_dmic_nids) - 1;
+		}
 		break;
 	case 0x111d7608: /* 5 Port with Analog Mixer */
+		memcpy(&spec->private_dimux, &stac92hd71bxx_dmux_amixer,
+		       sizeof(stac92hd71bxx_dmux_amixer));
+		spec->private_dimux.num_items--;
 		switch (spec->board_config) {
 		case STAC_HP_M4:
 			/* Enable VREF power saving on GPIO1 detect */
@@ -4942,7 +5104,15 @@
 
 		/* disable VSW */
 		spec->init = &stac92hd71bxx_analog_core_init[HD_DISABLE_PORTF];
-		stac_change_pin_config(codec, 0xf, 0x40f000f0);
+		unmute_init++;
+		stac_change_pin_config(codec, 0x0f, 0x40f000f0);
+		stac_change_pin_config(codec, 0x19, 0x40f000f3);
+		stac92hd71bxx_dmic_nids[STAC92HD71BXX_NUM_DMICS - 1] = 0;
+		spec->num_dmics = stac92hd71bxx_connected_ports(codec,
+					stac92hd71bxx_dmic_nids,
+					STAC92HD71BXX_NUM_DMICS - 1);
+		spec->num_dmuxes = ARRAY_SIZE(stac92hd71bxx_dmux_nids);
+		ndmic_nids = ARRAY_SIZE(stac92hd71bxx_dmic_nids) - 2;
 		break;
 	case 0x111d7603: /* 6 Port with Analog Mixer */
 		if ((codec->revision_id & 0xf) == 1)
@@ -4952,12 +5122,22 @@
 		spec->num_pwrs = 0;
 		/* fallthru */
 	default:
+		memcpy(&spec->private_dimux, &stac92hd71bxx_dmux_amixer,
+		       sizeof(stac92hd71bxx_dmux_amixer));
 		spec->dinput_mux = &spec->private_dimux;
 		spec->mixer = stac92hd71bxx_analog_mixer;
 		spec->init = stac92hd71bxx_analog_core_init;
 		codec->slave_dig_outs = stac92hd71bxx_slave_dig_outs;
+		spec->num_dmics = stac92hd71bxx_connected_ports(codec,
+					stac92hd71bxx_dmic_nids,
+					STAC92HD71BXX_NUM_DMICS);
+		spec->num_dmuxes = ARRAY_SIZE(stac92hd71bxx_dmux_nids);
+		ndmic_nids = ARRAY_SIZE(stac92hd71bxx_dmic_nids) - 1;
 	}
 
+	if (get_wcaps(codec, 0xa) & AC_WCAP_IN_AMP)
+		snd_hda_sequence_write_cache(codec, unmute_init);
+
 	spec->aloopback_mask = 0x50;
 	spec->aloopback_shift = 0;
 
@@ -4965,13 +5145,12 @@
 	spec->digbeep_nid = 0x26;
 	spec->mux_nids = stac92hd71bxx_mux_nids;
 	spec->adc_nids = stac92hd71bxx_adc_nids;
-	spec->dmic_nids = stac92hd71bxx_dmic_nids;
-	spec->dmux_nids = stac92hd71bxx_dmux_nids;
 	spec->smux_nids = stac92hd71bxx_smux_nids;
 	spec->pwr_nids = stac92hd71bxx_pwr_nids;
 
 	spec->num_muxes = ARRAY_SIZE(stac92hd71bxx_mux_nids);
 	spec->num_adcs = ARRAY_SIZE(stac92hd71bxx_adc_nids);
+	spec->num_smuxes = stac92hd71bxx_connected_smuxes(codec, 0x1e);
 
 	switch (spec->board_config) {
 	case STAC_HP_M4:
@@ -4991,19 +5170,13 @@
 		spec->num_smuxes = 0;
 		spec->num_dmuxes = 0;
 		break;
-	default:
-		spec->num_dmics = STAC92HD71BXX_NUM_DMICS;
-		spec->num_smuxes = ARRAY_SIZE(stac92hd71bxx_smux_nids);
-		spec->num_dmuxes = ARRAY_SIZE(stac92hd71bxx_dmux_nids);
 	};
 
 	spec->multiout.dac_nids = spec->dac_nids;
 	if (spec->dinput_mux)
-		spec->private_dimux.num_items +=
-			spec->num_dmics -
-				(ARRAY_SIZE(stac92hd71bxx_dmic_nids) - 1);
+		spec->private_dimux.num_items += spec->num_dmics - ndmic_nids;
 
-	err = stac92xx_parse_auto_config(codec, 0x21, 0x23);
+	err = stac92xx_parse_auto_config(codec, 0x21, 0);
 	if (!err) {
 		if (spec->board_config < 0) {
 			printk(KERN_WARNING "hda_codec: No auto-config is "
@@ -5139,16 +5312,16 @@
 		return -ENOMEM;
 
 	codec->spec = spec;
+	codec->slave_dig_outs = stac927x_slave_dig_outs;
 	spec->num_pins = ARRAY_SIZE(stac927x_pin_nids);
 	spec->pin_nids = stac927x_pin_nids;
 	spec->board_config = snd_hda_check_board_config(codec, STAC_927X_MODELS,
 							stac927x_models,
 							stac927x_cfg_tbl);
  again:
-	if (spec->board_config < 0 || !stac927x_brd_tbl[spec->board_config]) {
-		if (spec->board_config < 0)
-			snd_printdd(KERN_INFO "hda_codec: Unknown model for"
-				    "STAC927x, using BIOS defaults\n");
+	if (spec->board_config < 0) {
+		snd_printdd(KERN_INFO "hda_codec: Unknown model for"
+			    "STAC927x, using BIOS defaults\n");
 		err = stac92xx_save_bios_config_regs(codec);
 	} else
 		err = stac_save_pin_cfgs(codec,
@@ -5307,7 +5480,9 @@
 
 	spec->aloopback_mask = 0x40;
 	spec->aloopback_shift = 0;
-	spec->eapd_switch = 1;
+	/* Turn on/off EAPD per HP plugging */
+	if (spec->board_config != STAC_9205_EAPD)
+		spec->eapd_switch = 1;
 	spec->multiout.dac_nids = spec->dac_nids;
 	
 	switch (spec->board_config){
@@ -5371,223 +5546,64 @@
  * STAC9872 hack
  */
 
-/* static config for Sony VAIO FE550G and Sony VAIO AR */
-static hda_nid_t vaio_dacs[] = { 0x2 };
-#define VAIO_HP_DAC	0x5
-static hda_nid_t vaio_adcs[] = { 0x8 /*,0x6*/ };
-static hda_nid_t vaio_mux_nids[] = { 0x15 };
-
-static struct hda_input_mux vaio_mux = {
-	.num_items = 3,
-	.items = {
-		/* { "HP", 0x0 }, */
-		{ "Mic Jack", 0x1 },
-		{ "Internal Mic", 0x2 },
-		{ "PCM", 0x3 },
-	}
-};
-
-static struct hda_verb vaio_init[] = {
-	{0x0a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP }, /* HP <- 0x2 */
-	{0x0a, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | STAC_HP_EVENT},
-	{0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, /* Speaker <- 0x5 */
-	{0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, /* Mic? (<- 0x2) */
-	{0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN }, /* CD */
-	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, /* Mic? */
+static struct hda_verb stac9872_core_init[] = {
 	{0x15, AC_VERB_SET_CONNECT_SEL, 0x1}, /* mic-sel: 0a,0d,14,02 */
-	{0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* HP */
-	{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* Speaker */
-	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* capture sw/vol -> 0x8 */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, /* CD-in -> 0x6 */
 	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Mic-in -> 0x9 */
 	{}
 };
 
-static struct hda_verb vaio_ar_init[] = {
-	{0x0a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP }, /* HP <- 0x2 */
-	{0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, /* Speaker <- 0x5 */
-	{0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, /* Mic? (<- 0x2) */
-	{0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN }, /* CD */
-/*	{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },*/ /* Optical Out */
-	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, /* Mic? */
-	{0x15, AC_VERB_SET_CONNECT_SEL, 0x1}, /* mic-sel: 0a,0d,14,02 */
-	{0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* HP */
-	{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* Speaker */
-/*	{0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},*/ /* Optical Out */
-	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* capture sw/vol -> 0x8 */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, /* CD-in -> 0x6 */
-	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Mic-in -> 0x9 */
-	{}
-};
-
-static struct snd_kcontrol_new vaio_mixer[] = {
-	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x02, 0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Headphone Playback Switch", 0x02, 0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME("Speaker Playback Volume", 0x05, 0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Speaker Playback Switch", 0x05, 0, HDA_OUTPUT),
-	/* HDA_CODEC_VOLUME("CD Capture Volume", 0x07, 0, HDA_INPUT), */
+static struct snd_kcontrol_new stac9872_mixer[] = {
 	HDA_CODEC_VOLUME("Capture Volume", 0x09, 0, HDA_INPUT),
 	HDA_CODEC_MUTE("Capture Switch", 0x09, 0, HDA_INPUT),
-	{
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = "Capture Source",
-		.count = 1,
-		.info = stac92xx_mux_enum_info,
-		.get = stac92xx_mux_enum_get,
-		.put = stac92xx_mux_enum_put,
-	},
-	{}
+	{ } /* end */
 };
 
-static struct snd_kcontrol_new vaio_ar_mixer[] = {
-	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x02, 0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Headphone Playback Switch", 0x02, 0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME("Speaker Playback Volume", 0x05, 0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Speaker Playback Switch", 0x05, 0, HDA_OUTPUT),
-	/* HDA_CODEC_VOLUME("CD Capture Volume", 0x07, 0, HDA_INPUT), */
-	HDA_CODEC_VOLUME("Capture Volume", 0x09, 0, HDA_INPUT),
-	HDA_CODEC_MUTE("Capture Switch", 0x09, 0, HDA_INPUT),
-	/*HDA_CODEC_MUTE("Optical Out Switch", 0x10, 0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME("Optical Out Volume", 0x10, 0, HDA_OUTPUT),*/
-	{
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = "Capture Source",
-		.count = 1,
-		.info = stac92xx_mux_enum_info,
-		.get = stac92xx_mux_enum_get,
-		.put = stac92xx_mux_enum_put,
-	},
-	{}
+static hda_nid_t stac9872_pin_nids[] = {
+	0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
+	0x11, 0x13, 0x14,
 };
 
-static struct hda_codec_ops stac9872_patch_ops = {
-	.build_controls = stac92xx_build_controls,
-	.build_pcms = stac92xx_build_pcms,
-	.init = stac92xx_init,
-	.free = stac92xx_free,
-#ifdef SND_HDA_NEEDS_RESUME
-	.resume = stac92xx_resume,
-#endif
+static hda_nid_t stac9872_adc_nids[] = {
+	0x8 /*,0x6*/
 };
 
-static int stac9872_vaio_init(struct hda_codec *codec)
-{
-	int err;
-
-	err = stac92xx_init(codec);
-	if (err < 0)
-		return err;
-	if (codec->patch_ops.unsol_event)
-		codec->patch_ops.unsol_event(codec, STAC_HP_EVENT << 26);
-	return 0;
-}
-
-static void stac9872_vaio_hp_detect(struct hda_codec *codec, unsigned int res)
-{
-	if (get_pin_presence(codec, 0x0a)) {
-		stac92xx_reset_pinctl(codec, 0x0f, AC_PINCTL_OUT_EN);
-		stac92xx_set_pinctl(codec, 0x0a, AC_PINCTL_OUT_EN);
-	} else {
-		stac92xx_reset_pinctl(codec, 0x0a, AC_PINCTL_OUT_EN);
-		stac92xx_set_pinctl(codec, 0x0f, AC_PINCTL_OUT_EN);
-	}
-} 
-
-static void stac9872_vaio_unsol_event(struct hda_codec *codec, unsigned int res)
-{
-	switch (res >> 26) {
-	case STAC_HP_EVENT:
-		stac9872_vaio_hp_detect(codec, res);
-		break;
-	}
-}
-
-static struct hda_codec_ops stac9872_vaio_patch_ops = {
-	.build_controls = stac92xx_build_controls,
-	.build_pcms = stac92xx_build_pcms,
-	.init = stac9872_vaio_init,
-	.free = stac92xx_free,
-	.unsol_event = stac9872_vaio_unsol_event,
-#ifdef CONFIG_PM
-	.resume = stac92xx_resume,
-#endif
-};
-
-enum { /* FE and SZ series. id=0x83847661 and subsys=0x104D0700 or 104D1000. */
-       CXD9872RD_VAIO,
-       /* Unknown. id=0x83847662 and subsys=0x104D1200 or 104D1000. */
-       STAC9872AK_VAIO, 
-       /* Unknown. id=0x83847661 and subsys=0x104D1200. */
-       STAC9872K_VAIO,
-       /* AR Series. id=0x83847664 and subsys=104D1300 */
-       CXD9872AKD_VAIO,
-       STAC_9872_MODELS,
-};
-
-static const char *stac9872_models[STAC_9872_MODELS] = {
-	[CXD9872RD_VAIO]	= "vaio",
-	[CXD9872AKD_VAIO]	= "vaio-ar",
-};
-
-static struct snd_pci_quirk stac9872_cfg_tbl[] = {
-	SND_PCI_QUIRK(0x104d, 0x81e6, "Sony VAIO F/S", CXD9872RD_VAIO),
-	SND_PCI_QUIRK(0x104d, 0x81ef, "Sony VAIO F/S", CXD9872RD_VAIO),
-	SND_PCI_QUIRK(0x104d, 0x81fd, "Sony VAIO AR", CXD9872AKD_VAIO),
-	SND_PCI_QUIRK(0x104d, 0x8205, "Sony VAIO AR", CXD9872AKD_VAIO),
-	{}
+static hda_nid_t stac9872_mux_nids[] = {
+	0x15
 };
 
 static int patch_stac9872(struct hda_codec *codec)
 {
 	struct sigmatel_spec *spec;
-	int board_config;
+	int err;
 
-	board_config = snd_hda_check_board_config(codec, STAC_9872_MODELS,
-						  stac9872_models,
-						  stac9872_cfg_tbl);
-	if (board_config < 0)
-		/* unknown config, let generic-parser do its job... */
-		return snd_hda_parse_generic_codec(codec);
-	
 	spec  = kzalloc(sizeof(*spec), GFP_KERNEL);
 	if (spec == NULL)
 		return -ENOMEM;
-
 	codec->spec = spec;
-	switch (board_config) {
-	case CXD9872RD_VAIO:
-	case STAC9872AK_VAIO:
-	case STAC9872K_VAIO:
-		spec->mixer = vaio_mixer;
-		spec->init = vaio_init;
-		spec->multiout.max_channels = 2;
-		spec->multiout.num_dacs = ARRAY_SIZE(vaio_dacs);
-		spec->multiout.dac_nids = vaio_dacs;
-		spec->multiout.hp_nid = VAIO_HP_DAC;
-		spec->num_adcs = ARRAY_SIZE(vaio_adcs);
-		spec->adc_nids = vaio_adcs;
-		spec->num_pwrs = 0;
-		spec->input_mux = &vaio_mux;
-		spec->mux_nids = vaio_mux_nids;
-		codec->patch_ops = stac9872_vaio_patch_ops;
-		break;
-	
-	case CXD9872AKD_VAIO:
-		spec->mixer = vaio_ar_mixer;
-		spec->init = vaio_ar_init;
-		spec->multiout.max_channels = 2;
-		spec->multiout.num_dacs = ARRAY_SIZE(vaio_dacs);
-		spec->multiout.dac_nids = vaio_dacs;
-		spec->multiout.hp_nid = VAIO_HP_DAC;
-		spec->num_adcs = ARRAY_SIZE(vaio_adcs);
-		spec->num_pwrs = 0;
-		spec->adc_nids = vaio_adcs;
-		spec->input_mux = &vaio_mux;
-		spec->mux_nids = vaio_mux_nids;
-		codec->patch_ops = stac9872_patch_ops;
-		break;
-	}
 
+#if 0 /* no model right now */
+	spec->board_config = snd_hda_check_board_config(codec, STAC_9872_MODELS,
+							stac9872_models,
+							stac9872_cfg_tbl);
+#endif
+
+	spec->num_pins = ARRAY_SIZE(stac9872_pin_nids);
+	spec->pin_nids = stac9872_pin_nids;
+	spec->multiout.dac_nids = spec->dac_nids;
+	spec->num_adcs = ARRAY_SIZE(stac9872_adc_nids);
+	spec->adc_nids = stac9872_adc_nids;
+	spec->num_muxes = ARRAY_SIZE(stac9872_mux_nids);
+	spec->mux_nids = stac9872_mux_nids;
+	spec->mixer = stac9872_mixer;
+	spec->init = stac9872_core_init;
+
+	err = stac92xx_parse_auto_config(codec, 0x10, 0x12);
+	if (err < 0) {
+		stac92xx_free(codec);
+		return -EINVAL;
+	}
+	spec->input_mux = &spec->private_imux;
+	codec->patch_ops = stac92xx_patch_ops;
 	return 0;
 }
 
diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c
index c761394..639b2ff 100644
--- a/sound/pci/hda/patch_via.c
+++ b/sound/pci/hda/patch_via.c
@@ -1354,7 +1354,7 @@
 
 	spec->multiout.max_channels = spec->multiout.num_dacs * 2;
 
-	if (spec->autocfg.dig_out_pin)
+	if (spec->autocfg.dig_outs)
 		spec->multiout.dig_out_nid = VT1708_DIGOUT_NID;
 	if (spec->autocfg.dig_in_pin)
 		spec->dig_in_nid = VT1708_DIGIN_NID;
@@ -1827,7 +1827,7 @@
 
 	spec->multiout.max_channels = spec->multiout.num_dacs * 2;
 
-	if (spec->autocfg.dig_out_pin)
+	if (spec->autocfg.dig_outs)
 		spec->multiout.dig_out_nid = VT1709_DIGOUT_NID;
 	if (spec->autocfg.dig_in_pin)
 		spec->dig_in_nid = VT1709_DIGIN_NID;
@@ -2371,7 +2371,7 @@
 
 	spec->multiout.max_channels = spec->multiout.num_dacs * 2;
 
-	if (spec->autocfg.dig_out_pin)
+	if (spec->autocfg.dig_outs)
 		spec->multiout.dig_out_nid = VT1708B_DIGOUT_NID;
 	if (spec->autocfg.dig_in_pin)
 		spec->dig_in_nid = VT1708B_DIGIN_NID;
@@ -2836,7 +2836,7 @@
 
 	spec->multiout.max_channels = spec->multiout.num_dacs * 2;
 
-	if (spec->autocfg.dig_out_pin)
+	if (spec->autocfg.dig_outs)
 		spec->multiout.dig_out_nid = VT1708S_DIGOUT_NID;
 
 	spec->extra_dig_out_nid = 0x15;
@@ -3155,7 +3155,7 @@
 
 	spec->multiout.max_channels = spec->multiout.num_dacs * 2;
 
-	if (spec->autocfg.dig_out_pin)
+	if (spec->autocfg.dig_outs)
 		spec->multiout.dig_out_nid = VT1702_DIGOUT_NID;
 
 	spec->extra_dig_out_nid = 0x1B;
diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c
index 98c6a8c..18c7c91 100644
--- a/sound/pci/oxygen/virtuoso.c
+++ b/sound/pci/oxygen/virtuoso.c
@@ -26,7 +26,7 @@
  * SPI 0 -> 1st PCM1796 (front)
  * SPI 1 -> 2nd PCM1796 (surround)
  * SPI 2 -> 3rd PCM1796 (center/LFE)
- * SPI 4 -> 4th PCM1796 (back)
+ * SPI 4 -> 4th PCM1796 (back) and EEPROM self-destruct (do not use!)
  *
  * GPIO 2 -> M0 of CS5381
  * GPIO 3 -> M1 of CS5381
@@ -207,6 +207,12 @@
 static inline void pcm1796_write_spi(struct oxygen *chip, unsigned int codec,
 				     u8 reg, u8 value)
 {
+	/*
+	 * We don't want to do writes on SPI 4 because the EEPROM, which shares
+	 * the same pin, might get confused and broken.  We'd better take care
+	 * that the driver works with the default register values ...
+	 */
+#if 0
 	/* maps ALSA channel pair number to SPI output */
 	static const u8 codec_map[4] = {
 		0, 1, 2, 4
@@ -217,6 +223,7 @@
 			 (codec_map[codec] << OXYGEN_SPI_CODEC_SHIFT) |
 			 OXYGEN_SPI_CEN_LATCH_CLOCK_HI,
 			 (reg << 8) | value);
+#endif
 }
 
 static inline void pcm1796_write_i2c(struct oxygen *chip, unsigned int codec,
@@ -676,7 +683,7 @@
 	if (chip->uart_input_count >= 2 &&
 	    chip->uart_input[chip->uart_input_count - 2] == 'O' &&
 	    chip->uart_input[chip->uart_input_count - 1] == 'K') {
-		printk(KERN_DEBUG "message from Xonar HDAV HDMI chip received:");
+		printk(KERN_DEBUG "message from Xonar HDAV HDMI chip received:\n");
 		print_hex_dump_bytes("", DUMP_PREFIX_OFFSET,
 				     chip->uart_input, chip->uart_input_count);
 		chip->uart_input_count = 0;
@@ -750,6 +757,9 @@
 
 static int xonar_d2_control_filter(struct snd_kcontrol_new *template)
 {
+	if (!strncmp(template->name, "Master Playback ", 16))
+		/* disable volume/mute because they would require SPI writes */
+		return 1;
 	if (!strncmp(template->name, "CD Capture ", 11))
 		/* CD in is actually connected to the video in pin */
 		template->private_value ^= AC97_CD ^ AC97_VIDEO;
@@ -840,9 +850,8 @@
 	.dac_volume_min = 0x0f,
 	.dac_volume_max = 0xff,
 	.misc_flags = OXYGEN_MISC_MIDI,
-	.function_flags = OXYGEN_FUNCTION_SPI |
-			  OXYGEN_FUNCTION_ENABLE_SPI_4_5,
-	.dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
+	.function_flags = OXYGEN_FUNCTION_SPI,
+	.dac_i2s_format = OXYGEN_I2S_FORMAT_I2S,
 	.adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
 };
 
@@ -899,6 +908,7 @@
 	.dac_channels = 8,
 	.dac_volume_min = 0x0f,
 	.dac_volume_max = 0xff,
+	.misc_flags = OXYGEN_MISC_MIDI,
 	.function_flags = OXYGEN_FUNCTION_2WIRE,
 	.dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
 	.adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
diff --git a/sound/ppc/snd_ps3.c b/sound/ppc/snd_ps3.c
index 8f9e385..ff32111 100644
--- a/sound/ppc/snd_ps3.c
+++ b/sound/ppc/snd_ps3.c
@@ -477,7 +477,7 @@
 		card->dma_start_bus_addr[SND_PS3_CH_R] =
 			runtime->dma_addr + (runtime->dma_bytes / 2);
 
-		pr_debug("%s: vaddr=%p bus=%#lx\n", __func__,
+		pr_debug("%s: vaddr=%p bus=%#llx\n", __func__,
 			 card->dma_start_vaddr[SND_PS3_CH_L],
 			 card->dma_start_bus_addr[SND_PS3_CH_L]);
 
@@ -1030,7 +1030,7 @@
 		pr_info("%s: nullbuffer alloc failed\n", __func__);
 		goto clean_preallocate;
 	}
-	pr_debug("%s: null vaddr=%p dma=%#lx\n", __func__,
+	pr_debug("%s: null vaddr=%p dma=%#llx\n", __func__,
 		 the_card.null_buffer_start_vaddr,
 		 the_card.null_buffer_start_dma_addr);
 	/* set default sample rate/word width */
diff --git a/sound/soc/atmel/atmel-pcm.c b/sound/soc/atmel/atmel-pcm.c
index 1fac5ef..3dcdc4e3 100644
--- a/sound/soc/atmel/atmel-pcm.c
+++ b/sound/soc/atmel/atmel-pcm.c
@@ -44,8 +44,6 @@
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
 
-#include <mach/hardware.h>
-
 #include "atmel-pcm.h"
 
 
diff --git a/sound/soc/fsl/mpc8610_hpcd.c b/sound/soc/fsl/mpc8610_hpcd.c
index bcec3f6..acf39a6 100644
--- a/sound/soc/fsl/mpc8610_hpcd.c
+++ b/sound/soc/fsl/mpc8610_hpcd.c
@@ -183,16 +183,6 @@
 };
 
 /**
- * mpc8610_hpcd_machine: ASoC machine data
- */
-static struct snd_soc_card mpc8610_hpcd_machine = {
-	.probe = mpc8610_hpcd_machine_probe,
-	.remove = mpc8610_hpcd_machine_remove,
-	.name = "MPC8610 HPCD",
-	.num_links = 1,
-};
-
-/**
  * mpc8610_hpcd_probe: OF probe function for the fabric driver
  *
  * This function gets called when an SSI node is found in the device tree.
@@ -455,7 +445,11 @@
 	machine_data->dai.codec_dai = &cs4270_dai; /* The codec_dai we want */
 	machine_data->dai.ops = &mpc8610_hpcd_ops;
 
-	mpc8610_hpcd_machine.dai_link = &machine_data->dai;
+	machine_data->machine.probe = mpc8610_hpcd_machine_probe;
+	machine_data->machine.remove = mpc8610_hpcd_machine_remove;
+	machine_data->machine.name = "MPC8610 HPCD";
+	machine_data->machine.num_links = 1;
+	machine_data->machine.dai_link = &machine_data->dai;
 
 	/* Allocate a new audio platform device structure */
 	sound_device = platform_device_alloc("soc-audio", -1);
@@ -465,7 +459,7 @@
 		goto error;
 	}
 
-	machine_data->sound_devdata.card = &mpc8610_hpcd_machine;
+	machine_data->sound_devdata.card = &machine_data->machine;
 	machine_data->sound_devdata.codec_dev = &soc_codec_device_cs4270;
 	machine_data->machine.platform = &fsl_soc_platform;
 
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 493a4e8..a2f1da8 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -720,7 +720,8 @@
 	struct snd_soc_dapm_path *path;
 	int found = 0;
 
-	if (widget->id != snd_soc_dapm_mux)
+	if (widget->id != snd_soc_dapm_mux &&
+	    widget->id != snd_soc_dapm_value_mux)
 		return -ENODEV;
 
 	if (!snd_soc_test_bits(widget->codec, e->reg, mask, val))
diff --git a/sound/usb/usbquirks.h b/sound/usb/usbquirks.h
index 9211575..5d8ef09 100644
--- a/sound/usb/usbquirks.h
+++ b/sound/usb/usbquirks.h
@@ -128,6 +128,14 @@
 	.bInterfaceClass = USB_CLASS_AUDIO,
 	.bInterfaceSubClass = USB_SUBCLASS_AUDIO_CONTROL
 },
+{
+	USB_DEVICE(0x046d, 0x0990),
+	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+		.vendor_name = "Logitech, Inc.",
+		.product_name = "QuickCam Pro 9000",
+		.ifnum = QUIRK_NO_INTERFACE
+	}
+},
 
 /*
  * Yamaha devices