ARM: i.MX28: dts: rename usbphy pin names
The pins have nothing todo with the phy layer. We better rename them, so
it gets clear they are routed to the ehci core not to any phy.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/imx28-cfa10037.dts
index 6729872f..e5beaa5 100644
--- a/arch/arm/boot/dts/imx28-cfa10037.dts
+++ b/arch/arm/boot/dts/imx28-cfa10037.dts
@@ -54,7 +54,7 @@
ahb@80080000 {
usb1: usb@80090000 {
vbus-supply = <®_usb1_vbus>;
- pinctrl-0 = <&usbphy1_pins_a>;
+ pinctrl-0 = <&usb1_pins_a>;
pinctrl-names = "default";
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
index 093fd7b..7d51459 100644
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -298,7 +298,7 @@
ahb@80080000 {
usb1: usb@80090000 {
vbus-supply = <®_usb1_vbus>;
- pinctrl-0 = <&usbphy1_pins_a>;
+ pinctrl-0 = <&usb1_pins_a>;
pinctrl-names = "default";
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts
index 1ebd44e..c4e00ce 100644
--- a/arch/arm/boot/dts/imx28-cfa10057.dts
+++ b/arch/arm/boot/dts/imx28-cfa10057.dts
@@ -134,7 +134,7 @@
ahb@80080000 {
usb1: usb@80090000 {
vbus-supply = <®_usb1_vbus>;
- pinctrl-0 = <&usbphy1_pins_a>;
+ pinctrl-0 = <&usb1_pins_a>;
pinctrl-names = "default";
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts
index a4f0acb..7c9cc78 100644
--- a/arch/arm/boot/dts/imx28-cfa10058.dts
+++ b/arch/arm/boot/dts/imx28-cfa10058.dts
@@ -101,7 +101,7 @@
ahb@80080000 {
usb1: usb@80090000 {
vbus-supply = <®_usb1_vbus>;
- pinctrl-0 = <&usbphy1_pins_a>;
+ pinctrl-0 = <&usb1_pins_a>;
pinctrl-names = "default";
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts
index d6e71ed..15f3b39 100644
--- a/arch/arm/boot/dts/imx28-m28cu3.dts
+++ b/arch/arm/boot/dts/imx28-m28cu3.dts
@@ -180,7 +180,7 @@
usb1: usb@80090000 {
vbus-supply = <®_usb1_vbus>;
pinctrl-names = "default";
- pinctrl-0 = <&usbphy1_pins_a>;
+ pinctrl-0 = <&usb1_pins_a>;
disable-over-current;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index e6d0fa6..8536b0d 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -248,14 +248,14 @@
usb0: usb@80080000 {
vbus-supply = <®_usb0_vbus>;
pinctrl-names = "default";
- pinctrl-0 = <&usbphy0_pins_a>;
+ pinctrl-0 = <&usb0_pins_a>;
status = "okay";
};
usb1: usb@80090000 {
vbus-supply = <®_usb1_vbus>;
pinctrl-names = "default";
- pinctrl-0 = <&usbphy1_pins_a>;
+ pinctrl-0 = <&usb1_pins_a>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts
index 2612a01..0ce3cb8 100644
--- a/arch/arm/boot/dts/imx28-sps1.dts
+++ b/arch/arm/boot/dts/imx28-sps1.dts
@@ -106,7 +106,7 @@
usb0: usb@80080000 {
vbus-supply = <®_usb0_vbus>;
pinctrl-names = "default";
- pinctrl-0 = <&usbphy0_pins_b>;
+ pinctrl-0 = <&usb0_pins_b>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index df783c2..f7deccd 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -783,7 +783,7 @@
fsl,pull-up = <MXS_PULL_DISABLE>;
};
- usbphy0_pins_a: usbphy0@0 {
+ usb0_pins_a: usb0@0 {
reg = <0>;
fsl,pinmux-ids = <
MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
@@ -793,7 +793,7 @@
fsl,pull-up = <MXS_PULL_DISABLE>;
};
- usbphy0_pins_b: usbphy0@1 {
+ usb0_pins_b: usb0@1 {
reg = <1>;
fsl,pinmux-ids = <
MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
@@ -803,7 +803,7 @@
fsl,pull-up = <MXS_PULL_DISABLE>;
};
- usbphy1_pins_a: usbphy1@0 {
+ usb1_pins_a: usb1@0 {
reg = <0>;
fsl,pinmux-ids = <
MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
