blob: 17f7cee569879e5d018e8b38c9317d4b88a714d0 [file] [log] [blame]
# -*- coding: utf-8 -*-
#
# The Linux Kernel documentation build configuration file, created by
# sphinx-quickstart on Fri Feb 12 13:51:46 2016.
#
# This file is execfile()d with the current directory set to its
# containing dir.
#
# Note that not all possible configuration values are present in this
# autogenerated file.
#
# All configuration values have a default; values that are commented out
# serve to show the default.
import sys
import os
import sphinx
# Get Sphinx version
major, minor, patch = sphinx.version_info[:3]
# If extensions (or modules to document with autodoc) are in another directory,
# add these directories to sys.path here. If the directory is relative to the
# documentation root, use os.path.abspath to make it absolute, like shown here.
sys.path.insert(0, os.path.abspath('sphinx'))
from load_config import loadConfig
# -- General configuration ------------------------------------------------
# If your documentation needs a minimal Sphinx version, state it here.
needs_sphinx = '1.7'
# Add any Sphinx extension module names here, as strings. They can be
# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
# ones.
extensions = ['kerneldoc', 'rstFlatTable', 'kernel_include',
'kfigure', 'sphinx.ext.ifconfig', 'automarkup',
'maintainers_include', 'sphinx.ext.autosectionlabel',
'kernel_abi', 'kernel_feat']
if major >= 3:
if (major > 3) or (minor > 0 or patch >= 2):
# Sphinx c function parser is more pedantic with regards to type
# checking. Due to that, having macros at c:function cause problems.
# Those needed to be scaped by using c_id_attributes[] array
c_id_attributes = [
# GCC Compiler types not parsed by Sphinx:
"__restrict__",
# include/linux/compiler_types.h:
"__iomem",
"__kernel",
"noinstr",
"notrace",
"__percpu",
"__rcu",
"__user",
# include/linux/compiler_attributes.h:
"__alias",
"__aligned",
"__aligned_largest",
"__always_inline",
"__assume_aligned",
"__cold",
"__attribute_const__",
"__copy",
"__pure",
"__designated_init",
"__visible",
"__printf",
"__scanf",
"__gnu_inline",
"__malloc",
"__mode",
"__no_caller_saved_registers",
"__noclone",
"__nonstring",
"__noreturn",
"__packed",
"__pure",
"__section",
"__always_unused",
"__maybe_unused",
"__used",
"__weak",
"noinline",
# include/linux/memblock.h:
"__init_memblock",
"__meminit",
# include/linux/init.h:
"__init",
"__ref",
# include/linux/linkage.h:
"asmlinkage",
]
else:
extensions.append('cdomain')
# Ensure that autosectionlabel will produce unique names
autosectionlabel_prefix_document = True
autosectionlabel_maxdepth = 2
extensions.append("sphinx.ext.imgmath")
# Add any paths that contain templates here, relative to this directory.
templates_path = ['_templates']
# The suffix(es) of source filenames.
# You can specify multiple suffix as a list of string:
# source_suffix = ['.rst', '.md']
source_suffix = '.rst'
# The encoding of source files.
#source_encoding = 'utf-8-sig'
# The master toctree document.
master_doc = 'index'
# General information about the project.
project = 'The Linux Kernel'
copyright = 'The kernel development community'
author = 'The kernel development community'
# The version info for the project you're documenting, acts as replacement for
# |version| and |release|, also used in various other places throughout the
# built documents.
#
# In a normal build, version and release are are set to KERNELVERSION and
# KERNELRELEASE, respectively, from the Makefile via Sphinx command line
# arguments.
#
# The following code tries to extract the information by reading the Makefile,
# when Sphinx is run directly (e.g. by Read the Docs).
try:
makefile_version = None
makefile_patchlevel = None
for line in open('../Makefile'):
key, val = [x.strip() for x in line.split('=', 2)]
if key == 'VERSION':
makefile_version = val
elif key == 'PATCHLEVEL':
makefile_patchlevel = val
if makefile_version and makefile_patchlevel:
break
except:
pass
finally:
if makefile_version and makefile_patchlevel:
version = release = makefile_version + '.' + makefile_patchlevel
else:
version = release = "unknown version"
# The language for content autogenerated by Sphinx. Refer to documentation
# for a list of supported languages.
#
# This is also used if you do content translation via gettext catalogs.
# Usually you set "language" from the command line for these cases.
language = None
# There are two options for replacing |today|: either, you set today to some
# non-false value, then it is used:
#today = ''
# Else, today_fmt is used as the format for a strftime call.
#today_fmt = '%B %d, %Y'
# List of patterns, relative to source directory, that match files and
# directories to ignore when looking for source files.
exclude_patterns = ['output']
# The reST default role (used for this markup: `text`) to use for all
# documents.
#default_role = None
# If true, '()' will be appended to :func: etc. cross-reference text.
#add_function_parentheses = True
# If true, the current module name will be prepended to all description
# unit titles (such as .. function::).
#add_module_names = True
# If true, sectionauthor and moduleauthor directives will be shown in the
# output. They are ignored by default.
#show_authors = False
# The name of the Pygments (syntax highlighting) style to use.
pygments_style = 'sphinx'
# A list of ignored prefixes for module index sorting.
#modindex_common_prefix = []
# If true, keep warnings as "system message" paragraphs in the built documents.
#keep_warnings = False
# If true, `todo` and `todoList` produce output, else they produce nothing.
todo_include_todos = False
primary_domain = 'c'
highlight_language = 'none'
# -- Options for HTML output ----------------------------------------------
# The theme to use for HTML and HTML Help pages. See the documentation for
# a list of builtin themes.
# The Read the Docs theme is available from
# - https://github.com/snide/sphinx_rtd_theme
# - https://pypi.python.org/pypi/sphinx_rtd_theme
# - python-sphinx-rtd-theme package (on Debian)
try:
import sphinx_rtd_theme
html_theme = 'sphinx_rtd_theme'
html_theme_path = [sphinx_rtd_theme.get_html_theme_path()]
except ImportError:
sys.stderr.write('Warning: The Sphinx \'sphinx_rtd_theme\' HTML theme was not found. Make sure you have the theme installed to produce pretty HTML output. Falling back to the default theme.\n')
# Theme options are theme-specific and customize the look and feel of a theme
# further. For a list of options available for each theme, see the
# documentation.
#html_theme_options = {}
# Add any paths that contain custom themes here, relative to this directory.
#html_theme_path = []
# The name for this set of Sphinx documents. If None, it defaults to
# "<project> v<release> documentation".
#html_title = None
# A shorter title for the navigation bar. Default is the same as html_title.
#html_short_title = None
# The name of an image file (relative to this directory) to place at the top
# of the sidebar.
#html_logo = None
# The name of an image file (within the static path) to use as favicon of the
# docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32
# pixels large.
#html_favicon = None
# Add any paths that contain custom static files (such as style sheets) here,
# relative to this directory. They are copied after the builtin static files,
# so a file named "default.css" will overwrite the builtin "default.css".
html_static_path = ['sphinx-static']
html_context = {
'css_files': [
'_static/theme_overrides.css',
],
}
# Add any extra paths that contain custom files (such as robots.txt or
# .htaccess) here, relative to this directory. These files are copied
# directly to the root of the documentation.
#html_extra_path = []
# If not '', a 'Last updated on:' timestamp is inserted at every page bottom,
# using the given strftime format.
#html_last_updated_fmt = '%b %d, %Y'
# If true, SmartyPants will be used to convert quotes and dashes to
# typographically correct entities.
html_use_smartypants = False
# Custom sidebar templates, maps document names to template names.
#html_sidebars = {}
# Additional templates that should be rendered to pages, maps page names to
# template names.
#html_additional_pages = {}
# If false, no module index is generated.
#html_domain_indices = True
# If false, no index is generated.
#html_use_index = True
# If true, the index is split into individual pages for each letter.
#html_split_index = False
# If true, links to the reST sources are added to the pages.
#html_show_sourcelink = True
# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
#html_show_sphinx = True
# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
#html_show_copyright = True
# If true, an OpenSearch description file will be output, and all pages will
# contain a <link> tag referring to it. The value of this option must be the
# base URL from which the finished HTML is served.
#html_use_opensearch = ''
# This is the file name suffix for HTML files (e.g. ".xhtml").
#html_file_suffix = None
# Language to be used for generating the HTML full-text search index.
# Sphinx supports the following languages:
# 'da', 'de', 'en', 'es', 'fi', 'fr', 'h', 'it', 'ja'
# 'nl', 'no', 'pt', 'ro', 'r', 'sv', 'tr'
#html_search_language = 'en'
# A dictionary with options for the search language support, empty by default.
# Now only 'ja' uses this config value
#html_search_options = {'type': 'default'}
# The name of a javascript file (relative to the configuration directory) that
# implements a search results scorer. If empty, the default will be used.
#html_search_scorer = 'scorer.js'
# Output file base name for HTML help builder.
htmlhelp_basename = 'TheLinuxKerneldoc'
# -- Options for LaTeX output ---------------------------------------------
latex_elements = {
# The paper size ('letterpaper' or 'a4paper').
'papersize': 'a4paper',
# The font size ('10pt', '11pt' or '12pt').
'pointsize': '11pt',
# Latex figure (float) alignment
#'figure_align': 'htbp',
# Don't mangle with UTF-8 chars
'inputenc': '',
'utf8extra': '',
# Set document margins
'sphinxsetup': '''
hmargin=0.5in, vmargin=1in,
parsedliteralwraps=true,
verbatimhintsturnover=false,
''',
# For CJK One-half spacing, need to be in front of hyperref
'extrapackages': r'\usepackage{setspace}',
# Additional stuff for the LaTeX preamble.
'preamble': '''
% Prevent column squeezing of tabulary.
\\setlength{\\tymin}{20em}
% Use some font with UTF-8 support with XeLaTeX
\\usepackage{fontspec}
\\setsansfont{DejaVu Sans}
\\setromanfont{DejaVu Serif}
\\setmonofont{DejaVu Sans Mono}
% Adjust \\headheight for fancyhdr
\\addtolength{\\headheight}{1.6pt}
\\addtolength{\\topmargin}{-1.6pt}
''',
}
# Translations have Asian (CJK) characters which are only displayed if
# xeCJK is used
latex_elements['preamble'] += '''
\\IfFontExistsTF{Noto Sans CJK SC}{
% This is needed for translations
\\usepackage{xeCJK}
\\IfFontExistsTF{Noto Serif CJK SC}{
\\setCJKmainfont{Noto Serif CJK SC}[AutoFakeSlant]
}{
\\setCJKmainfont{Noto Sans CJK SC}[AutoFakeSlant]
}
\\setCJKsansfont{Noto Sans CJK SC}[AutoFakeSlant]
\\setCJKmonofont{Noto Sans Mono CJK SC}[AutoFakeSlant]
% CJK Language-specific font choices
\\IfFontExistsTF{Noto Serif CJK SC}{
\\newCJKfontfamily[SCmain]\\scmain{Noto Serif CJK SC}[AutoFakeSlant]
\\newCJKfontfamily[SCserif]\\scserif{Noto Serif CJK SC}[AutoFakeSlant]
}{
\\newCJKfontfamily[SCmain]\\scmain{Noto Sans CJK SC}[AutoFakeSlant]
\\newCJKfontfamily[SCserif]\\scserif{Noto Sans CJK SC}[AutoFakeSlant]
}
\\newCJKfontfamily[SCsans]\\scsans{Noto Sans CJK SC}[AutoFakeSlant]
\\newCJKfontfamily[SCmono]\\scmono{Noto Sans Mono CJK SC}[AutoFakeSlant]
\\IfFontExistsTF{Noto Serif CJK TC}{
\\newCJKfontfamily[TCmain]\\tcmain{Noto Serif CJK TC}[AutoFakeSlant]
\\newCJKfontfamily[TCserif]\\tcserif{Noto Serif CJK TC}[AutoFakeSlant]
}{
\\newCJKfontfamily[TCmain]\\tcmain{Noto Sans CJK TC}[AutoFakeSlant]
\\newCJKfontfamily[TCserif]\\tcserif{Noto Sans CJK TC}[AutoFakeSlant]
}
\\newCJKfontfamily[TCsans]\\tcsans{Noto Sans CJK TC}[AutoFakeSlant]
\\newCJKfontfamily[TCmono]\\tcmono{Noto Sans Mono CJK TC}[AutoFakeSlant]
\\IfFontExistsTF{Noto Serif CJK KR}{
\\newCJKfontfamily[KRmain]\\krmain{Noto Serif CJK KR}[AutoFakeSlant]
\\newCJKfontfamily[KRserif]\\krserif{Noto Serif CJK KR}[AutoFakeSlant]
}{
\\newCJKfontfamily[KRmain]\\krmain{Noto Sans CJK KR}[AutoFakeSlant]
\\newCJKfontfamily[KRserif]\\krserif{Noto Sans CJK KR}[AutoFakeSlant]
}
\\newCJKfontfamily[KRsans]\\krsans{Noto Sans CJK KR}[AutoFakeSlant]
\\newCJKfontfamily[KRmono]\\krmono{Noto Sans Mono CJK KR}[AutoFakeSlant]
\\IfFontExistsTF{Noto Serif CJK JP}{
\\newCJKfontfamily[JPmain]\\jpmain{Noto Serif CJK JP}[AutoFakeSlant]
\\newCJKfontfamily[JPserif]\\jpserif{Noto Serif CJK JP}[AutoFakeSlant]
}{
\\newCJKfontfamily[JPmain]\\jpmain{Noto Sans CJK JP}[AutoFakeSlant]
\\newCJKfontfamily[JPserif]\\jpserif{Noto Sans CJK JP}[AutoFakeSlant]
}
\\newCJKfontfamily[JPsans]\\jpsans{Noto Sans CJK JP}[AutoFakeSlant]
\\newCJKfontfamily[JPmono]\\jpmono{Noto Sans Mono CJK JP}[AutoFakeSlant]
% Dummy commands for Sphinx < 2.3 (no 'extrapackages' support)
\\providecommand{\\onehalfspacing}{}
\\providecommand{\\singlespacing}{}
% Define custom macros to on/off CJK
\\newcommand{\\kerneldocCJKon}{\\makexeCJKactive\\onehalfspacing}
\\newcommand{\\kerneldocCJKoff}{\\makexeCJKinactive\\singlespacing}
\\newcommand{\\kerneldocBeginSC}{%
\\begingroup%
\\scmain%
}
\\newcommand{\\kerneldocEndSC}{\\endgroup}
\\newcommand{\\kerneldocBeginTC}{%
\\begingroup%
\\tcmain%
\\renewcommand{\\CJKrmdefault}{TCserif}%
\\renewcommand{\\CJKsfdefault}{TCsans}%
\\renewcommand{\\CJKttdefault}{TCmono}%
}
\\newcommand{\\kerneldocEndTC}{\\endgroup}
\\newcommand{\\kerneldocBeginKR}{%
\\begingroup%
\\xeCJKDeclareCharClass{HalfLeft}{`“,`‘}%
\\xeCJKDeclareCharClass{HalfRight}{`”,`’}%
\\krmain%
\\renewcommand{\\CJKrmdefault}{KRserif}%
\\renewcommand{\\CJKsfdefault}{KRsans}%
\\renewcommand{\\CJKttdefault}{KRmono}%
\\xeCJKsetup{CJKspace = true} % For inter-phrase space
}
\\newcommand{\\kerneldocEndKR}{\\endgroup}
\\newcommand{\\kerneldocBeginJP}{%
\\begingroup%
\\xeCJKDeclareCharClass{HalfLeft}{`“,`‘}%
\\xeCJKDeclareCharClass{HalfRight}{`”,`’}%
\\jpmain%
\\renewcommand{\\CJKrmdefault}{JPserif}%
\\renewcommand{\\CJKsfdefault}{JPsans}%
\\renewcommand{\\CJKttdefault}{JPmono}%
}
\\newcommand{\\kerneldocEndJP}{\\endgroup}
% Single spacing in literal blocks
\\fvset{baselinestretch=1}
% To customize \\sphinxtableofcontents
\\usepackage{etoolbox}
% Inactivate CJK after tableofcontents
\\apptocmd{\\sphinxtableofcontents}{\\kerneldocCJKoff}{}{}
}{ % No CJK font found
% Custom macros to on/off CJK (Dummy)
\\newcommand{\\kerneldocCJKon}{}
\\newcommand{\\kerneldocCJKoff}{}
\\newcommand{\\kerneldocBeginSC}{}
\\newcommand{\\kerneldocEndSC}{}
\\newcommand{\\kerneldocBeginTC}{}
\\newcommand{\\kerneldocEndTC}{}
\\newcommand{\\kerneldocBeginKR}{}
\\newcommand{\\kerneldocEndKR}{}
\\newcommand{\\kerneldocBeginJP}{}
\\newcommand{\\kerneldocEndJP}{}
}
'''
# Fix reference escape troubles with Sphinx 1.4.x
if major == 1:
latex_elements['preamble'] += '\\renewcommand*{\\DUrole}[2]{ #2 }\n'
# With Sphinx 1.6, it is possible to change the Bg color directly
# by using:
# \definecolor{sphinxnoteBgColor}{RGB}{204,255,255}
# \definecolor{sphinxwarningBgColor}{RGB}{255,204,204}
# \definecolor{sphinxattentionBgColor}{RGB}{255,255,204}
# \definecolor{sphinximportantBgColor}{RGB}{192,255,204}
#
# However, it require to use sphinx heavy box with:
#
# \renewenvironment{sphinxlightbox} {%
# \\begin{sphinxheavybox}
# }
# \\end{sphinxheavybox}
# }
#
# Unfortunately, the implementation is buggy: if a note is inside a
# table, it isn't displayed well. So, for now, let's use boring
# black and white notes.
# Grouping the document tree into LaTeX files. List of tuples
# (source start file, target name, title,
# author, documentclass [howto, manual, or own class]).
# Sorted in alphabetical order
latex_documents = [
]
# Add all other index files from Documentation/ subdirectories
for fn in os.listdir('.'):
doc = os.path.join(fn, "index")
if os.path.exists(doc + ".rst"):
has = False
for l in latex_documents:
if l[0] == doc:
has = True
break
if not has:
latex_documents.append((doc, fn + '.tex',
'Linux %s Documentation' % fn.capitalize(),
'The kernel development community',
'manual'))
# The name of an image file (relative to this directory) to place at the top of
# the title page.
#latex_logo = None
# For "manual" documents, if this is true, then toplevel headings are parts,
# not chapters.
#latex_use_parts = False
# If true, show page references after internal links.
#latex_show_pagerefs = False
# If true, show URL addresses after external links.
#latex_show_urls = False
# Documents to append as an appendix to all manuals.
#latex_appendices = []
# If false, no module index is generated.
#latex_domain_indices = True
# -- Options for manual page output ---------------------------------------
# One entry per manual page. List of tuples
# (source start file, name, description, authors, manual section).
man_pages = [
(master_doc, 'thelinuxkernel', 'The Linux Kernel Documentation',
[author], 1)
]
# If true, show URL addresses after external links.
#man_show_urls = False
# -- Options for Texinfo output -------------------------------------------
# Grouping the document tree into Texinfo files. List of tuples
# (source start file, target name, title, author,
# dir menu entry, description, category)
texinfo_documents = [
(master_doc, 'TheLinuxKernel', 'The Linux Kernel Documentation',
author, 'TheLinuxKernel', 'One line description of project.',
'Miscellaneous'),
]
# Documents to append as an appendix to all manuals.
#texinfo_appendices = []
# If false, no module index is generated.
#texinfo_domain_indices = True
# How to display URL addresses: 'footnote', 'no', or 'inline'.
#texinfo_show_urls = 'footnote'
# If true, do not generate a @detailmenu in the "Top" node's menu.
#texinfo_no_detailmenu = False
# -- Options for Epub output ----------------------------------------------
# Bibliographic Dublin Core info.
epub_title = project
epub_author = author
epub_publisher = author
epub_copyright = copyright
# The basename for the epub file. It defaults to the project name.
#epub_basename = project
# The HTML theme for the epub output. Since the default themes are not
# optimized for small screen space, using the same theme for HTML and epub
# output is usually not wise. This defaults to 'epub', a theme designed to save
# visual space.
#epub_theme = 'epub'
# The language of the text. It defaults to the language option
# or 'en' if the language is not set.
#epub_language = ''
# The scheme of the identifier. Typical schemes are ISBN or URL.
#epub_scheme = ''
# The unique identifier of the text. This can be a ISBN number
# or the project homepage.
#epub_identifier = ''
# A unique identification for the text.
#epub_uid = ''
# A tuple containing the cover image and cover page html template filenames.
#epub_cover = ()
# A sequence of (type, uri, title) tuples for the guide element of content.opf.
#epub_guide = ()
# HTML files that should be inserted before the pages created by sphinx.
# The format is a list of tuples containing the path and title.
#epub_pre_files = []
# HTML files that should be inserted after the pages created by sphinx.
# The format is a list of tuples containing the path and title.
#epub_post_files = []
# A list of files that should not be packed into the epub file.
epub_exclude_files = ['search.html']
# The depth of the table of contents in toc.ncx.
#epub_tocdepth = 3
# Allow duplicate toc entries.
#epub_tocdup = True
# Choose between 'default' and 'includehidden'.
#epub_tocscope = 'default'
# Fix unsupported image types using the Pillow.
#epub_fix_images = False
# Scale large images.
#epub_max_image_width = 0
# How to display URL addresses: 'footnote', 'no', or 'inline'.
#epub_show_urls = 'inline'
# If false, no index is generated.
#epub_use_index = True
#=======
# rst2pdf
#
# Grouping the document tree into PDF files. List of tuples
# (source start file, target name, title, author, options).
#
# See the Sphinx chapter of https://ralsina.me/static/manual.pdf
#
# FIXME: Do not add the index file here; the result will be too big. Adding
# multiple PDF files here actually tries to get the cross-referencing right
# *between* PDF files.
pdf_documents = [
('kernel-documentation', u'Kernel', u'Kernel', u'J. Random Bozo'),
]
# kernel-doc extension configuration for running Sphinx directly (e.g. by Read
# the Docs). In a normal build, these are supplied from the Makefile via command
# line arguments.
kerneldoc_bin = '../scripts/kernel-doc'
kerneldoc_srctree = '..'
# ------------------------------------------------------------------------------
# Since loadConfig overwrites settings from the global namespace, it has to be
# the last statement in the conf.py file
# ------------------------------------------------------------------------------
loadConfig(globals())