arch/arm/mach-pxa/pxa3xx.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0-only
 /*
  * linux/arch/arm/mach-pxa/pxa3xx.c
  *
  * code specific to pxa3xx aka Monahans
  *
  * Copyright (C) 2006 Marvell International Ltd.
  *
  * 2007-09-02: eric miao <eric.miao@marvell.com>
  *             initial version
  */
 #include <linux/dmaengine.h>
 #include <linux/dma/pxa-dma.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/gpio-pxa.h>
 #include <linux/pm.h>
 #include <linux/platform_device.h>
 #include <linux/irq.h>
 #include <linux/irqchip.h>
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/syscore_ops.h>
 #include <linux/platform_data/i2c-pxa.h>
 #include <linux/platform_data/mmp_dma.h>
 #include <linux/soc/pxa/cpu.h>
 #include <linux/clk/pxa.h>

 #include <asm/mach/map.h>
 #include <asm/suspend.h>
 #include "pxa3xx-regs.h"
 #include "reset.h"
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include "pm.h"
 #include "addr-map.h"
 #include "smemc.h"
 #include "irqs.h"

 #include "generic.h"
 #include "devices.h"

 #define PECR_IE(n)	((1 << ((n) * 2)) << 28)
 #define PECR_IS(n)	((1 << ((n) * 2)) << 29)

 extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int));

 /*
  * NAND NFC: DFI bus arbitration subset
  */
 #define NDCR			(*(volatile u32 __iomem*)(NAND_VIRT + 0))
 #define NDCR_ND_ARB_EN		(1 << 12)
 #define NDCR_ND_ARB_CNTL	(1 << 19)

 #define CKEN_BOOT  		11      /* < Boot rom clock enable */
 #define CKEN_TPM   		19      /* < TPM clock enable */
 #define CKEN_HSIO2 		41      /* < HSIO2 clock enable */

 #ifdef CONFIG_PM

 #define ISRAM_START	0x5c000000
 #define ISRAM_SIZE	SZ_256K

 static void __iomem *sram;
 static unsigned long wakeup_src;

 /*
  * Enter a standby mode (S0D1C2 or S0D2C2).  Upon wakeup, the dynamic
  * memory controller has to be reinitialised, so we place some code
  * in the SRAM to perform this function.
  *
  * We disable FIQs across the standby - otherwise, we might receive a
  * FIQ while the SDRAM is unavailable.
  */
 static void pxa3xx_cpu_standby(unsigned int pwrmode)
 {
 	void (*fn)(unsigned int) = (void __force *)(sram + 0x8000);

 	memcpy_toio(sram + 0x8000, pm_enter_standby_start,
 		    pm_enter_standby_end - pm_enter_standby_start);

 	AD2D0SR = ~0;
 	AD2D1SR = ~0;
 	AD2D0ER = wakeup_src;
 	AD2D1ER = 0;
 	ASCR = ASCR;
 	ARSR = ARSR;

 	local_fiq_disable();
 	fn(pwrmode);
 	local_fiq_enable();

 	AD2D0ER = 0;
 	AD2D1ER = 0;
 }

 /*
  * NOTE:  currently, the OBM (OEM Boot Module) binary comes along with
  * PXA3xx development kits assumes that the resuming process continues
  * with the address stored within the first 4 bytes of SDRAM. The PSPR
  * register is used privately by BootROM and OBM, and _must_ be set to
  * 0x5c014000 for the moment.
  */
 static void pxa3xx_cpu_pm_suspend(void)
 {
 	volatile unsigned long *p = (volatile void *)0xc0000000;
 	unsigned long saved_data = *p;
 #ifndef CONFIG_IWMMXT
 	u64 acc0;

 	asm volatile(".arch_extension xscale\n\t"
 		     "mra %Q0, %R0, acc0" : "=r" (acc0));
 #endif

 	/* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */
 	CKENA |= (1 << CKEN_BOOT) | (1 << CKEN_TPM);
 	CKENB |= 1 << (CKEN_HSIO2 & 0x1f);

 	/* clear and setup wakeup source */
 	AD3SR = ~0;
 	AD3ER = wakeup_src;
 	ASCR = ASCR;
 	ARSR = ARSR;

 	PCFR |= (1u << 13);			/* L1_DIS */
 	PCFR &= ~((1u << 12) | (1u << 1));	/* L0_EN | SL_ROD */

 	PSPR = 0x5c014000;

 	/* overwrite with the resume address */
 	*p = __pa_symbol(cpu_resume);

 	cpu_suspend(0, pxa3xx_finish_suspend);

 	*p = saved_data;

 	AD3ER = 0;

 #ifndef CONFIG_IWMMXT
 	asm volatile(".arch_extension xscale\n\t"
 		     "mar acc0, %Q0, %R0" : "=r" (acc0));
 #endif
 }

 static void pxa3xx_cpu_pm_enter(suspend_state_t state)
 {
 	/*
 	 * Don't sleep if no wakeup sources are defined
 	 */
 	if (wakeup_src == 0) {
 		printk(KERN_ERR "Not suspending: no wakeup sources\n");
 		return;
 	}

 	switch (state) {
 	case PM_SUSPEND_STANDBY:
 		pxa3xx_cpu_standby(PXA3xx_PM_S0D2C2);
 		break;

 	case PM_SUSPEND_MEM:
 		pxa3xx_cpu_pm_suspend();
 		break;
 	}
 }

 static int pxa3xx_cpu_pm_valid(suspend_state_t state)
 {
 	return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY;
 }

 static struct pxa_cpu_pm_fns pxa3xx_cpu_pm_fns = {
 	.valid		= pxa3xx_cpu_pm_valid,
 	.enter		= pxa3xx_cpu_pm_enter,
 };

 static void __init pxa3xx_init_pm(void)
 {
 	sram = ioremap(ISRAM_START, ISRAM_SIZE);
 	if (!sram) {
 		printk(KERN_ERR "Unable to map ISRAM: disabling standby/suspend\n");
 		return;
 	}

 	/*
 	 * Since we copy wakeup code into the SRAM, we need to ensure
 	 * that it is preserved over the low power modes.  Note: bit 8
 	 * is undocumented in the developer manual, but must be set.
 	 */
 	AD1R |= ADXR_L2 | ADXR_R0;
 	AD2R |= ADXR_L2 | ADXR_R0;
 	AD3R |= ADXR_L2 | ADXR_R0;

 	/*
 	 * Clear the resume enable registers.
 	 */
 	AD1D0ER = 0;
 	AD2D0ER = 0;
 	AD2D1ER = 0;
 	AD3ER = 0;

 	pxa_cpu_pm_fns = &pxa3xx_cpu_pm_fns;
 }

 static int pxa3xx_set_wake(struct irq_data *d, unsigned int on)
 {
 	unsigned long flags, mask = 0;

 	switch (d->irq) {
 	case IRQ_SSP3:
 		mask = ADXER_MFP_WSSP3;
 		break;
 	case IRQ_MSL:
 		mask = ADXER_WMSL0;
 		break;
 	case IRQ_USBH2:
 	case IRQ_USBH1:
 		mask = ADXER_WUSBH;
 		break;
 	case IRQ_KEYPAD:
 		mask = ADXER_WKP;
 		break;
 	case IRQ_AC97:
 		mask = ADXER_MFP_WAC97;
 		break;
 	case IRQ_USIM:
 		mask = ADXER_WUSIM0;
 		break;
 	case IRQ_SSP2:
 		mask = ADXER_MFP_WSSP2;
 		break;
 	case IRQ_I2C:
 		mask = ADXER_MFP_WI2C;
 		break;
 	case IRQ_STUART:
 		mask = ADXER_MFP_WUART3;
 		break;
 	case IRQ_BTUART:
 		mask = ADXER_MFP_WUART2;
 		break;
 	case IRQ_FFUART:
 		mask = ADXER_MFP_WUART1;
 		break;
 	case IRQ_MMC:
 		mask = ADXER_MFP_WMMC1;
 		break;
 	case IRQ_SSP:
 		mask = ADXER_MFP_WSSP1;
 		break;
 	case IRQ_RTCAlrm:
 		mask = ADXER_WRTC;
 		break;
 	case IRQ_SSP4:
 		mask = ADXER_MFP_WSSP4;
 		break;
 	case IRQ_TSI:
 		mask = ADXER_WTSI;
 		break;
 	case IRQ_USIM2:
 		mask = ADXER_WUSIM1;
 		break;
 	case IRQ_MMC2:
 		mask = ADXER_MFP_WMMC2;
 		break;
 	case IRQ_NAND:
 		mask = ADXER_MFP_WFLASH;
 		break;
 	case IRQ_USB2:
 		mask = ADXER_WUSB2;
 		break;
 	case IRQ_WAKEUP0:
 		mask = ADXER_WEXTWAKE0;
 		break;
 	case IRQ_WAKEUP1:
 		mask = ADXER_WEXTWAKE1;
 		break;
 	case IRQ_MMC3:
 		mask = ADXER_MFP_GEN12;
 		break;
 	default:
 		return -EINVAL;
 	}

 	local_irq_save(flags);
 	if (on)
 		wakeup_src |= mask;
 	else
 		wakeup_src &= ~mask;
 	local_irq_restore(flags);

 	return 0;
 }
 #else
 static inline void pxa3xx_init_pm(void) {}
 #define pxa3xx_set_wake	NULL
 #endif

 static void pxa_ack_ext_wakeup(struct irq_data *d)
 {
 	PECR |= PECR_IS(d->irq - IRQ_WAKEUP0);
 }

 static void pxa_mask_ext_wakeup(struct irq_data *d)
 {
 	pxa_mask_irq(d);
 	PECR &= ~PECR_IE(d->irq - IRQ_WAKEUP0);
 }

 static void pxa_unmask_ext_wakeup(struct irq_data *d)
 {
 	pxa_unmask_irq(d);
 	PECR |= PECR_IE(d->irq - IRQ_WAKEUP0);
 }

 static int pxa_set_ext_wakeup_type(struct irq_data *d, unsigned int flow_type)
 {
 	if (flow_type & IRQ_TYPE_EDGE_RISING)
 		PWER |= 1 << (d->irq - IRQ_WAKEUP0);

 	if (flow_type & IRQ_TYPE_EDGE_FALLING)
 		PWER |= 1 << (d->irq - IRQ_WAKEUP0 + 2);

 	return 0;
 }

 static struct irq_chip pxa_ext_wakeup_chip = {
 	.name		= "WAKEUP",
 	.irq_ack	= pxa_ack_ext_wakeup,
 	.irq_mask	= pxa_mask_ext_wakeup,
 	.irq_unmask	= pxa_unmask_ext_wakeup,
 	.irq_set_type	= pxa_set_ext_wakeup_type,
 };

 static void __init pxa_init_ext_wakeup_irq(int (*fn)(struct irq_data *,
 					   unsigned int))
 {
 	int irq;

 	for (irq = IRQ_WAKEUP0; irq <= IRQ_WAKEUP1; irq++) {
 		irq_set_chip_and_handler(irq, &pxa_ext_wakeup_chip,
 					 handle_edge_irq);
 		irq_clear_status_flags(irq, IRQ_NOREQUEST);
 	}

 	pxa_ext_wakeup_chip.irq_set_wake = fn;
 }

 static void __init __pxa3xx_init_irq(void)
 {
 	/* enable CP6 access */
 	u32 value;
 	__asm__ __volatile__("mrc p15, 0, %0, c15, c1, 0\n": "=r"(value));
 	value |= (1 << 6);
 	__asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value));

 	pxa_init_ext_wakeup_irq(pxa3xx_set_wake);
 }

 void __init pxa3xx_init_irq(void)
 {
 	__pxa3xx_init_irq();
 	pxa_init_irq(56, pxa3xx_set_wake);
 }

 #ifdef CONFIG_OF
 static int __init __init
 pxa3xx_dt_init_irq(struct device_node *node, struct device_node *parent)
 {
 	__pxa3xx_init_irq();
 	pxa_dt_irq_init(pxa3xx_set_wake);
 	set_handle_irq(ichp_handle_irq);

 	return 0;
 }
 IRQCHIP_DECLARE(pxa3xx_intc, "marvell,pxa-intc", pxa3xx_dt_init_irq);
 #endif	/* CONFIG_OF */

 static struct map_desc pxa3xx_io_desc[] __initdata = {
 	{	/* Mem Ctl */
 		.virtual	= (unsigned long)SMEMC_VIRT,
 		.pfn		= __phys_to_pfn(PXA3XX_SMEMC_BASE),
 		.length		= SMEMC_SIZE,
 		.type		= MT_DEVICE
 	}, {
 		.virtual	= (unsigned long)NAND_VIRT,
 		.pfn		= __phys_to_pfn(NAND_PHYS),
 		.length		= NAND_SIZE,
 		.type		= MT_DEVICE
 	},
 };

 void __init pxa3xx_map_io(void)
 {
 	pxa_map_io();
 	iotable_init(ARRAY_AND_SIZE(pxa3xx_io_desc));
 	pxa3xx_get_clk_frequency_khz(1);
 }

 /*
  * device registration specific to PXA3xx.
  */

 void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 {
 	pxa_register_device(&pxa3xx_device_i2c_power, info);
 }

 static struct pxa_gpio_platform_data pxa3xx_gpio_pdata = {
 	.irq_base	= PXA_GPIO_TO_IRQ(0),
 };

 static struct platform_device *devices[] __initdata = {
 	&pxa27x_device_udc,
 	&pxa_device_pmu,
 	&pxa_device_i2s,
 	&pxa_device_asoc_ssp1,
 	&pxa_device_asoc_ssp2,
 	&pxa_device_asoc_ssp3,
 	&pxa_device_asoc_ssp4,
 	&pxa_device_asoc_platform,
 	&pxa_device_rtc,
 	&pxa3xx_device_ssp1,
 	&pxa3xx_device_ssp2,
 	&pxa3xx_device_ssp3,
 	&pxa3xx_device_ssp4,
 	&pxa27x_device_pwm0,
 	&pxa27x_device_pwm1,
 };

 static const struct dma_slave_map pxa3xx_slave_map[] = {
 	/* PXA25x, PXA27x and PXA3xx common entries */
 	{ "pxa2xx-ac97", "pcm_pcm_mic_mono", PDMA_FILTER_PARAM(LOWEST, 8) },
 	{ "pxa2xx-ac97", "pcm_pcm_aux_mono_in", PDMA_FILTER_PARAM(LOWEST, 9) },
 	{ "pxa2xx-ac97", "pcm_pcm_aux_mono_out",
 	  PDMA_FILTER_PARAM(LOWEST, 10) },
 	{ "pxa2xx-ac97", "pcm_pcm_stereo_in", PDMA_FILTER_PARAM(LOWEST, 11) },
 	{ "pxa2xx-ac97", "pcm_pcm_stereo_out", PDMA_FILTER_PARAM(LOWEST, 12) },
 	{ "pxa-ssp-dai.0", "rx", PDMA_FILTER_PARAM(LOWEST, 13) },
 	{ "pxa-ssp-dai.0", "tx", PDMA_FILTER_PARAM(LOWEST, 14) },
 	{ "pxa-ssp-dai.1", "rx", PDMA_FILTER_PARAM(LOWEST, 15) },
 	{ "pxa-ssp-dai.1", "tx", PDMA_FILTER_PARAM(LOWEST, 16) },
 	{ "pxa2xx-ir", "rx", PDMA_FILTER_PARAM(LOWEST, 17) },
 	{ "pxa2xx-ir", "tx", PDMA_FILTER_PARAM(LOWEST, 18) },
 	{ "pxa2xx-mci.0", "rx", PDMA_FILTER_PARAM(LOWEST, 21) },
 	{ "pxa2xx-mci.0", "tx", PDMA_FILTER_PARAM(LOWEST, 22) },
 	{ "pxa-ssp-dai.2", "rx", PDMA_FILTER_PARAM(LOWEST, 66) },
 	{ "pxa-ssp-dai.2", "tx", PDMA_FILTER_PARAM(LOWEST, 67) },

 	/* PXA3xx specific map */
 	{ "pxa-ssp-dai.3", "rx", PDMA_FILTER_PARAM(LOWEST, 2) },
 	{ "pxa-ssp-dai.3", "tx", PDMA_FILTER_PARAM(LOWEST, 3) },
 	{ "pxa2xx-mci.1", "rx", PDMA_FILTER_PARAM(LOWEST, 93) },
 	{ "pxa2xx-mci.1", "tx", PDMA_FILTER_PARAM(LOWEST, 94) },
 	{ "pxa3xx-nand", "data", PDMA_FILTER_PARAM(LOWEST, 97) },
 	{ "pxa2xx-mci.2", "rx", PDMA_FILTER_PARAM(LOWEST, 100) },
 	{ "pxa2xx-mci.2", "tx", PDMA_FILTER_PARAM(LOWEST, 101) },
 };

 static struct mmp_dma_platdata pxa3xx_dma_pdata = {
 	.dma_channels	= 32,
 	.nb_requestors	= 100,
 	.slave_map	= pxa3xx_slave_map,
 	.slave_map_cnt	= ARRAY_SIZE(pxa3xx_slave_map),
 };

 static int __init pxa3xx_init(void)
 {
 	int ret = 0;

 	if (cpu_is_pxa3xx()) {

 		pxa_register_wdt(ARSR);

 		/*
 		 * clear RDH bit every time after reset
 		 *
 		 * Note: the last 3 bits DxS are write-1-to-clear so carefully
 		 * preserve them here in case they will be referenced later
 		 */
 		ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);

 		/*
 		 * Disable DFI bus arbitration, to prevent a system bus lock if
 		 * somebody disables the NAND clock (unused clock) while this
 		 * bit remains set.
 		 */
 		NDCR = (NDCR & ~NDCR_ND_ARB_EN) | NDCR_ND_ARB_CNTL;

 		pxa3xx_init_pm();

 		enable_irq_wake(IRQ_WAKEUP0);
 		if (cpu_is_pxa320())
 			enable_irq_wake(IRQ_WAKEUP1);

 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa3xx_mfp_syscore_ops);

 		if (of_have_populated_dt())
 			return 0;

 		pxa2xx_set_dmac_info(&pxa3xx_dma_pdata);
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
 		if (ret)
 			return ret;
 		if (cpu_is_pxa300() || cpu_is_pxa310() || cpu_is_pxa320()) {
 			platform_device_add_data(&pxa3xx_device_gpio,
 						 &pxa3xx_gpio_pdata,
 						 sizeof(pxa3xx_gpio_pdata));
 			ret = platform_device_register(&pxa3xx_device_gpio);
 		}
 	}

 	return ret;
 }

 postcore_initcall(pxa3xx_init);
	// SPDX-License-Identifier: GPL-2.0-only
	/*
	* linux/arch/arm/mach-pxa/pxa3xx.c
	*
	* code specific to pxa3xx aka Monahans
	*
	* Copyright (C) 2006 Marvell International Ltd.
	*
	* 2007-09-02: eric miao <eric.miao@marvell.com>
	* initial version
	*/
	#include <linux/dmaengine.h>
	#include <linux/dma/pxa-dma.h>
	#include <linux/module.h>
	#include <linux/kernel.h>
	#include <linux/init.h>
	#include <linux/gpio-pxa.h>
	#include <linux/pm.h>
	#include <linux/platform_device.h>
	#include <linux/irq.h>
	#include <linux/irqchip.h>
	#include <linux/io.h>
	#include <linux/of.h>
	#include <linux/syscore_ops.h>
	#include <linux/platform_data/i2c-pxa.h>
	#include <linux/platform_data/mmp_dma.h>
	#include <linux/soc/pxa/cpu.h>
	#include <linux/clk/pxa.h>

	#include <asm/mach/map.h>
	#include <asm/suspend.h>
	#include "pxa3xx-regs.h"
	#include "reset.h"
	#include <linux/platform_data/usb-ohci-pxa27x.h>
	#include "pm.h"
	#include "addr-map.h"
	#include "smemc.h"
	#include "irqs.h"

	#include "generic.h"
	#include "devices.h"

	#define PECR_IE(n) ((1 << ((n) * 2)) << 28)
	#define PECR_IS(n) ((1 << ((n) * 2)) << 29)

	extern void __init pxa_dt_irq_init(int (fn)(struct irq_data , unsigned int));

	/*
	* NAND NFC: DFI bus arbitration subset
	*/
	#define NDCR ((volatile u32 __iomem)(NAND_VIRT + 0))
	#define NDCR_ND_ARB_EN (1 << 12)
	#define NDCR_ND_ARB_CNTL (1 << 19)

	#define CKEN_BOOT 11 /* < Boot rom clock enable */
	#define CKEN_TPM 19 /* < TPM clock enable */
	#define CKEN_HSIO2 41 /* < HSIO2 clock enable */

	#ifdef CONFIG_PM

	#define ISRAM_START 0x5c000000
	#define ISRAM_SIZE SZ_256K

	static void __iomem *sram;
	static unsigned long wakeup_src;

	/*
	* Enter a standby mode (S0D1C2 or S0D2C2). Upon wakeup, the dynamic
	* memory controller has to be reinitialised, so we place some code
	* in the SRAM to perform this function.
	*
	* We disable FIQs across the standby - otherwise, we might receive a
	* FIQ while the SDRAM is unavailable.
	*/
	static void pxa3xx_cpu_standby(unsigned int pwrmode)
	{
	void (fn)(unsigned int) = (void __force )(sram + 0x8000);

	memcpy_toio(sram + 0x8000, pm_enter_standby_start,
	pm_enter_standby_end - pm_enter_standby_start);

	AD2D0SR = ~0;
	AD2D1SR = ~0;
	AD2D0ER = wakeup_src;
	AD2D1ER = 0;
	ASCR = ASCR;
	ARSR = ARSR;

	local_fiq_disable();
	fn(pwrmode);
	local_fiq_enable();

	AD2D0ER = 0;
	AD2D1ER = 0;
	}

	/*
	* NOTE: currently, the OBM (OEM Boot Module) binary comes along with
	* PXA3xx development kits assumes that the resuming process continues
	* with the address stored within the first 4 bytes of SDRAM. The PSPR
	* register is used privately by BootROM and OBM, and _must_ be set to
	* 0x5c014000 for the moment.
	*/
	static void pxa3xx_cpu_pm_suspend(void)
	{
	volatile unsigned long p = (volatile void )0xc0000000;
	unsigned long saved_data = *p;
	#ifndef CONFIG_IWMMXT
	u64 acc0;

	asm volatile(".arch_extension xscale\n\t"
	"mra %Q0, %R0, acc0" : "=r" (acc0));
	#endif

	/* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */
	CKENA \|= (1 << CKEN_BOOT) \| (1 << CKEN_TPM);
	CKENB \|= 1 << (CKEN_HSIO2 & 0x1f);

	/* clear and setup wakeup source */
	AD3SR = ~0;
	AD3ER = wakeup_src;
	ASCR = ASCR;
	ARSR = ARSR;

	PCFR \|= (1u << 13); /* L1_DIS */
	PCFR &= ~((1u << 12) \| (1u << 1)); /* L0_EN \| SL_ROD */

	PSPR = 0x5c014000;

	/* overwrite with the resume address */
	*p = __pa_symbol(cpu_resume);

	cpu_suspend(0, pxa3xx_finish_suspend);

	*p = saved_data;

	AD3ER = 0;

	#ifndef CONFIG_IWMMXT
	asm volatile(".arch_extension xscale\n\t"
	"mar acc0, %Q0, %R0" : "=r" (acc0));
	#endif
	}

	static void pxa3xx_cpu_pm_enter(suspend_state_t state)
	{
	/*
	* Don't sleep if no wakeup sources are defined
	*/
	if (wakeup_src == 0) {
	printk(KERN_ERR "Not suspending: no wakeup sources\n");
	return;
	}

	switch (state) {
	case PM_SUSPEND_STANDBY:
	pxa3xx_cpu_standby(PXA3xx_PM_S0D2C2);
	break;

	case PM_SUSPEND_MEM:
	pxa3xx_cpu_pm_suspend();
	break;
	}
	}

	static int pxa3xx_cpu_pm_valid(suspend_state_t state)
	{
	return state == PM_SUSPEND_MEM \|\| state == PM_SUSPEND_STANDBY;
	}

	static struct pxa_cpu_pm_fns pxa3xx_cpu_pm_fns = {
	.valid = pxa3xx_cpu_pm_valid,
	.enter = pxa3xx_cpu_pm_enter,
	};

	static void __init pxa3xx_init_pm(void)
	{
	sram = ioremap(ISRAM_START, ISRAM_SIZE);
	if (!sram) {
	printk(KERN_ERR "Unable to map ISRAM: disabling standby/suspend\n");
	return;
	}

	/*
	* Since we copy wakeup code into the SRAM, we need to ensure
	* that it is preserved over the low power modes. Note: bit 8
	* is undocumented in the developer manual, but must be set.
	*/
	AD1R \|= ADXR_L2 \| ADXR_R0;
	AD2R \|= ADXR_L2 \| ADXR_R0;
	AD3R \|= ADXR_L2 \| ADXR_R0;

	/*
	* Clear the resume enable registers.
	*/
	AD1D0ER = 0;
	AD2D0ER = 0;
	AD2D1ER = 0;
	AD3ER = 0;

	pxa_cpu_pm_fns = &pxa3xx_cpu_pm_fns;
	}

	static int pxa3xx_set_wake(struct irq_data *d, unsigned int on)
	{
	unsigned long flags, mask = 0;

	switch (d->irq) {
	case IRQ_SSP3:
	mask = ADXER_MFP_WSSP3;
	break;
	case IRQ_MSL:
	mask = ADXER_WMSL0;
	break;
	case IRQ_USBH2:
	case IRQ_USBH1:
	mask = ADXER_WUSBH;
	break;
	case IRQ_KEYPAD:
	mask = ADXER_WKP;
	break;
	case IRQ_AC97:
	mask = ADXER_MFP_WAC97;
	break;
	case IRQ_USIM:
	mask = ADXER_WUSIM0;
	break;
	case IRQ_SSP2:
	mask = ADXER_MFP_WSSP2;
	break;
	case IRQ_I2C:
	mask = ADXER_MFP_WI2C;
	break;
	case IRQ_STUART:
	mask = ADXER_MFP_WUART3;
	break;
	case IRQ_BTUART:
	mask = ADXER_MFP_WUART2;
	break;
	case IRQ_FFUART:
	mask = ADXER_MFP_WUART1;
	break;
	case IRQ_MMC:
	mask = ADXER_MFP_WMMC1;
	break;
	case IRQ_SSP:
	mask = ADXER_MFP_WSSP1;
	break;
	case IRQ_RTCAlrm:
	mask = ADXER_WRTC;
	break;
	case IRQ_SSP4:
	mask = ADXER_MFP_WSSP4;
	break;
	case IRQ_TSI:
	mask = ADXER_WTSI;
	break;
	case IRQ_USIM2:
	mask = ADXER_WUSIM1;
	break;
	case IRQ_MMC2:
	mask = ADXER_MFP_WMMC2;
	break;
	case IRQ_NAND:
	mask = ADXER_MFP_WFLASH;
	break;
	case IRQ_USB2:
	mask = ADXER_WUSB2;
	break;
	case IRQ_WAKEUP0:
	mask = ADXER_WEXTWAKE0;
	break;
	case IRQ_WAKEUP1:
	mask = ADXER_WEXTWAKE1;
	break;
	case IRQ_MMC3:
	mask = ADXER_MFP_GEN12;
	break;
	default:
	return -EINVAL;
	}

	local_irq_save(flags);
	if (on)
	wakeup_src \|= mask;
	else
	wakeup_src &= ~mask;
	local_irq_restore(flags);

	return 0;
	}
	#else
	static inline void pxa3xx_init_pm(void) {}
	#define pxa3xx_set_wake NULL
	#endif

	static void pxa_ack_ext_wakeup(struct irq_data *d)
	{
	PECR \|= PECR_IS(d->irq - IRQ_WAKEUP0);
	}

	static void pxa_mask_ext_wakeup(struct irq_data *d)
	{
	pxa_mask_irq(d);
	PECR &= ~PECR_IE(d->irq - IRQ_WAKEUP0);
	}

	static void pxa_unmask_ext_wakeup(struct irq_data *d)
	{
	pxa_unmask_irq(d);
	PECR \|= PECR_IE(d->irq - IRQ_WAKEUP0);
	}

	static int pxa_set_ext_wakeup_type(struct irq_data *d, unsigned int flow_type)
	{
	if (flow_type & IRQ_TYPE_EDGE_RISING)
	PWER \|= 1 << (d->irq - IRQ_WAKEUP0);

	if (flow_type & IRQ_TYPE_EDGE_FALLING)
	PWER \|= 1 << (d->irq - IRQ_WAKEUP0 + 2);

	return 0;
	}

	static struct irq_chip pxa_ext_wakeup_chip = {
	.name = "WAKEUP",
	.irq_ack = pxa_ack_ext_wakeup,
	.irq_mask = pxa_mask_ext_wakeup,
	.irq_unmask = pxa_unmask_ext_wakeup,
	.irq_set_type = pxa_set_ext_wakeup_type,
	};

	static void __init pxa_init_ext_wakeup_irq(int (fn)(struct irq_data ,
	unsigned int))
	{
	int irq;

	for (irq = IRQ_WAKEUP0; irq <= IRQ_WAKEUP1; irq++) {
	irq_set_chip_and_handler(irq, &pxa_ext_wakeup_chip,
	handle_edge_irq);
	irq_clear_status_flags(irq, IRQ_NOREQUEST);
	}

	pxa_ext_wakeup_chip.irq_set_wake = fn;
	}

	static void __init __pxa3xx_init_irq(void)
	{
	/* enable CP6 access */
	u32 value;
	__asm__ __volatile__("mrc p15, 0, %0, c15, c1, 0\n": "=r"(value));
	value \|= (1 << 6);
	__asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value));

	pxa_init_ext_wakeup_irq(pxa3xx_set_wake);
	}

	void __init pxa3xx_init_irq(void)
	{
	__pxa3xx_init_irq();
	pxa_init_irq(56, pxa3xx_set_wake);
	}

	#ifdef CONFIG_OF
	static int __init __init
	pxa3xx_dt_init_irq(struct device_node node, struct device_node parent)
	{
	__pxa3xx_init_irq();
	pxa_dt_irq_init(pxa3xx_set_wake);
	set_handle_irq(ichp_handle_irq);

	return 0;
	}
	IRQCHIP_DECLARE(pxa3xx_intc, "marvell,pxa-intc", pxa3xx_dt_init_irq);
	#endif /* CONFIG_OF */

	static struct map_desc pxa3xx_io_desc[] __initdata = {
	{ /* Mem Ctl */
	.virtual = (unsigned long)SMEMC_VIRT,
	.pfn = __phys_to_pfn(PXA3XX_SMEMC_BASE),
	.length = SMEMC_SIZE,
	.type = MT_DEVICE
	}, {
	.virtual = (unsigned long)NAND_VIRT,
	.pfn = __phys_to_pfn(NAND_PHYS),
	.length = NAND_SIZE,
	.type = MT_DEVICE
	},
	};

	void __init pxa3xx_map_io(void)
	{
	pxa_map_io();
	iotable_init(ARRAY_AND_SIZE(pxa3xx_io_desc));
	pxa3xx_get_clk_frequency_khz(1);
	}

	/*
	* device registration specific to PXA3xx.
	*/

	void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)
	{
	pxa_register_device(&pxa3xx_device_i2c_power, info);
	}

	static struct pxa_gpio_platform_data pxa3xx_gpio_pdata = {
	.irq_base = PXA_GPIO_TO_IRQ(0),
	};

	static struct platform_device *devices[] __initdata = {
	&pxa27x_device_udc,
	&pxa_device_pmu,
	&pxa_device_i2s,
	&pxa_device_asoc_ssp1,
	&pxa_device_asoc_ssp2,
	&pxa_device_asoc_ssp3,
	&pxa_device_asoc_ssp4,
	&pxa_device_asoc_platform,
	&pxa_device_rtc,
	&pxa3xx_device_ssp1,
	&pxa3xx_device_ssp2,
	&pxa3xx_device_ssp3,
	&pxa3xx_device_ssp4,
	&pxa27x_device_pwm0,
	&pxa27x_device_pwm1,
	};

	static const struct dma_slave_map pxa3xx_slave_map[] = {
	/* PXA25x, PXA27x and PXA3xx common entries */
	{ "pxa2xx-ac97", "pcm_pcm_mic_mono", PDMA_FILTER_PARAM(LOWEST, 8) },
	{ "pxa2xx-ac97", "pcm_pcm_aux_mono_in", PDMA_FILTER_PARAM(LOWEST, 9) },
	{ "pxa2xx-ac97", "pcm_pcm_aux_mono_out",
	PDMA_FILTER_PARAM(LOWEST, 10) },
	{ "pxa2xx-ac97", "pcm_pcm_stereo_in", PDMA_FILTER_PARAM(LOWEST, 11) },
	{ "pxa2xx-ac97", "pcm_pcm_stereo_out", PDMA_FILTER_PARAM(LOWEST, 12) },
	{ "pxa-ssp-dai.0", "rx", PDMA_FILTER_PARAM(LOWEST, 13) },
	{ "pxa-ssp-dai.0", "tx", PDMA_FILTER_PARAM(LOWEST, 14) },
	{ "pxa-ssp-dai.1", "rx", PDMA_FILTER_PARAM(LOWEST, 15) },
	{ "pxa-ssp-dai.1", "tx", PDMA_FILTER_PARAM(LOWEST, 16) },
	{ "pxa2xx-ir", "rx", PDMA_FILTER_PARAM(LOWEST, 17) },
	{ "pxa2xx-ir", "tx", PDMA_FILTER_PARAM(LOWEST, 18) },
	{ "pxa2xx-mci.0", "rx", PDMA_FILTER_PARAM(LOWEST, 21) },
	{ "pxa2xx-mci.0", "tx", PDMA_FILTER_PARAM(LOWEST, 22) },
	{ "pxa-ssp-dai.2", "rx", PDMA_FILTER_PARAM(LOWEST, 66) },
	{ "pxa-ssp-dai.2", "tx", PDMA_FILTER_PARAM(LOWEST, 67) },

	/* PXA3xx specific map */
	{ "pxa-ssp-dai.3", "rx", PDMA_FILTER_PARAM(LOWEST, 2) },
	{ "pxa-ssp-dai.3", "tx", PDMA_FILTER_PARAM(LOWEST, 3) },
	{ "pxa2xx-mci.1", "rx", PDMA_FILTER_PARAM(LOWEST, 93) },
	{ "pxa2xx-mci.1", "tx", PDMA_FILTER_PARAM(LOWEST, 94) },
	{ "pxa3xx-nand", "data", PDMA_FILTER_PARAM(LOWEST, 97) },
	{ "pxa2xx-mci.2", "rx", PDMA_FILTER_PARAM(LOWEST, 100) },
	{ "pxa2xx-mci.2", "tx", PDMA_FILTER_PARAM(LOWEST, 101) },
	};

	static struct mmp_dma_platdata pxa3xx_dma_pdata = {
	.dma_channels = 32,
	.nb_requestors = 100,
	.slave_map = pxa3xx_slave_map,
	.slave_map_cnt = ARRAY_SIZE(pxa3xx_slave_map),
	};

	static int __init pxa3xx_init(void)
	{
	int ret = 0;

	if (cpu_is_pxa3xx()) {

	pxa_register_wdt(ARSR);

	/*
	* clear RDH bit every time after reset
	*
	* Note: the last 3 bits DxS are write-1-to-clear so carefully
	* preserve them here in case they will be referenced later
	*/
	ASCR &= ~(ASCR_RDH \| ASCR_D1S \| ASCR_D2S \| ASCR_D3S);

	/*
	* Disable DFI bus arbitration, to prevent a system bus lock if
	* somebody disables the NAND clock (unused clock) while this
	* bit remains set.
	*/
	NDCR = (NDCR & ~NDCR_ND_ARB_EN) \| NDCR_ND_ARB_CNTL;

	pxa3xx_init_pm();

	enable_irq_wake(IRQ_WAKEUP0);
	if (cpu_is_pxa320())
	enable_irq_wake(IRQ_WAKEUP1);

	register_syscore_ops(&pxa_irq_syscore_ops);
	register_syscore_ops(&pxa3xx_mfp_syscore_ops);

	if (of_have_populated_dt())
	return 0;

	pxa2xx_set_dmac_info(&pxa3xx_dma_pdata);
	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
	if (ret)
	return ret;
	if (cpu_is_pxa300() \|\| cpu_is_pxa310() \|\| cpu_is_pxa320()) {
	platform_device_add_data(&pxa3xx_device_gpio,
	&pxa3xx_gpio_pdata,
	sizeof(pxa3xx_gpio_pdata));
	ret = platform_device_register(&pxa3xx_device_gpio);
	}
	}

	return ret;
	}

	postcore_initcall(pxa3xx_init);