| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * |
| * Copyright (C) 2015 Nikolay Martynov <mar.kolya@gmail.com> |
| * Copyright (C) 2015 John Crispin <john@phrozen.org> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/sys_soc.h> |
| #include <linux/memblock.h> |
| #include <linux/pci.h> |
| #include <linux/bug.h> |
| |
| #include <asm/bootinfo.h> |
| #include <asm/mipsregs.h> |
| #include <asm/smp-ops.h> |
| #include <asm/mips-cps.h> |
| #include <asm/mach-ralink/ralink_regs.h> |
| #include <asm/mach-ralink/mt7621.h> |
| |
| #include "common.h" |
| |
| #define MT7621_MEM_TEST_PATTERN 0xaa5555aa |
| |
| static u32 detect_magic __initdata; |
| |
| int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge) |
| { |
| struct resource_entry *entry; |
| resource_size_t mask; |
| |
| entry = resource_list_first_type(&bridge->windows, IORESOURCE_MEM); |
| if (!entry) { |
| pr_err("Cannot get memory resource\n"); |
| return -EINVAL; |
| } |
| |
| if (mips_cps_numiocu(0)) { |
| /* |
| * Hardware doesn't accept mask values with 1s after |
| * 0s (e.g. 0xffef), so warn if that's happen |
| */ |
| mask = ~(entry->res->end - entry->res->start) & CM_GCR_REGn_MASK_ADDRMASK; |
| WARN_ON(mask && BIT(ffz(~mask)) - 1 != ~mask); |
| |
| write_gcr_reg1_base(entry->res->start); |
| write_gcr_reg1_mask(mask | CM_GCR_REGn_MASK_CMTGT_IOCU0); |
| pr_info("PCI coherence region base: 0x%08llx, mask/settings: 0x%08llx\n", |
| (unsigned long long)read_gcr_reg1_base(), |
| (unsigned long long)read_gcr_reg1_mask()); |
| } |
| |
| return 0; |
| } |
| |
| phys_addr_t mips_cpc_default_phys_base(void) |
| { |
| panic("Cannot detect cpc address"); |
| } |
| |
| static bool __init mt7621_addr_wraparound_test(phys_addr_t size) |
| { |
| void *dm = (void *)KSEG1ADDR(&detect_magic); |
| |
| if (CPHYSADDR(dm + size) >= MT7621_LOWMEM_MAX_SIZE) |
| return true; |
| __raw_writel(MT7621_MEM_TEST_PATTERN, dm); |
| if (__raw_readl(dm) != __raw_readl(dm + size)) |
| return false; |
| __raw_writel(~MT7621_MEM_TEST_PATTERN, dm); |
| return __raw_readl(dm) == __raw_readl(dm + size); |
| } |
| |
| static void __init mt7621_memory_detect(void) |
| { |
| phys_addr_t size; |
| |
| for (size = 32 * SZ_1M; size <= 256 * SZ_1M; size <<= 1) { |
| if (mt7621_addr_wraparound_test(size)) { |
| memblock_add(MT7621_LOWMEM_BASE, size); |
| return; |
| } |
| } |
| |
| memblock_add(MT7621_LOWMEM_BASE, MT7621_LOWMEM_MAX_SIZE); |
| memblock_add(MT7621_HIGHMEM_BASE, MT7621_HIGHMEM_SIZE); |
| } |
| |
| void __init ralink_of_remap(void) |
| { |
| rt_sysc_membase = plat_of_remap_node("mediatek,mt7621-sysc"); |
| rt_memc_membase = plat_of_remap_node("mediatek,mt7621-memc"); |
| |
| if (!rt_sysc_membase || !rt_memc_membase) |
| panic("Failed to remap core resources"); |
| } |
| |
| static void soc_dev_init(struct ralink_soc_info *soc_info, u32 rev) |
| { |
| struct soc_device *soc_dev; |
| struct soc_device_attribute *soc_dev_attr; |
| |
| soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); |
| if (!soc_dev_attr) |
| return; |
| |
| soc_dev_attr->soc_id = "mt7621"; |
| soc_dev_attr->family = "Ralink"; |
| |
| if (((rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK) == 1 && |
| (rev & CHIP_REV_ECO_MASK) == 1) |
| soc_dev_attr->revision = "E2"; |
| else |
| soc_dev_attr->revision = "E1"; |
| |
| soc_dev_attr->data = soc_info; |
| |
| soc_dev = soc_device_register(soc_dev_attr); |
| if (IS_ERR(soc_dev)) { |
| kfree(soc_dev_attr); |
| return; |
| } |
| } |
| |
| void __init prom_soc_init(struct ralink_soc_info *soc_info) |
| { |
| void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7621_SYSC_BASE); |
| unsigned char *name = NULL; |
| u32 n0; |
| u32 n1; |
| u32 rev; |
| |
| /* Early detection of CMP support */ |
| mips_cm_probe(); |
| mips_cpc_probe(); |
| |
| if (mips_cps_numiocu(0)) { |
| /* |
| * mips_cm_probe() wipes out bootloader |
| * config for CM regions and we have to configure them |
| * again. This SoC cannot talk to pamlbus devices |
| * witout proper iocu region set up. |
| * |
| * FIXME: it would be better to do this with values |
| * from DT, but we need this very early because |
| * without this we cannot talk to pretty much anything |
| * including serial. |
| */ |
| write_gcr_reg0_base(MT7621_PALMBUS_BASE); |
| write_gcr_reg0_mask(~MT7621_PALMBUS_SIZE | |
| CM_GCR_REGn_MASK_CMTGT_IOCU0); |
| __sync(); |
| } |
| |
| n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0); |
| n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1); |
| |
| if (n0 == MT7621_CHIP_NAME0 && n1 == MT7621_CHIP_NAME1) { |
| name = "MT7621"; |
| soc_info->compatible = "mediatek,mt7621-soc"; |
| } else { |
| panic("mt7621: unknown SoC, n0:%08x n1:%08x\n", n0, n1); |
| } |
| ralink_soc = MT762X_SOC_MT7621AT; |
| rev = __raw_readl(sysc + SYSC_REG_CHIP_REV); |
| |
| snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN, |
| "MediaTek %s ver:%u eco:%u", |
| name, |
| (rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK, |
| (rev & CHIP_REV_ECO_MASK)); |
| |
| soc_info->mem_detect = mt7621_memory_detect; |
| |
| soc_dev_init(soc_info, rev); |
| |
| if (!register_cps_smp_ops()) |
| return; |
| if (!register_cmp_smp_ops()) |
| return; |
| if (!register_vsmp_smp_ops()) |
| return; |
| } |