| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * HID driver for Sony DualSense(TM) controller. |
| * |
| * Copyright (c) 2020 Sony Interactive Entertainment |
| */ |
| |
| #include <linux/bits.h> |
| #include <linux/crc32.h> |
| #include <linux/device.h> |
| #include <linux/hid.h> |
| #include <linux/idr.h> |
| #include <linux/input/mt.h> |
| #include <linux/leds.h> |
| #include <linux/led-class-multicolor.h> |
| #include <linux/module.h> |
| |
| #include <asm/unaligned.h> |
| |
| #include "hid-ids.h" |
| |
| /* List of connected playstation devices. */ |
| static DEFINE_MUTEX(ps_devices_lock); |
| static LIST_HEAD(ps_devices_list); |
| |
| static DEFINE_IDA(ps_player_id_allocator); |
| |
| #define HID_PLAYSTATION_VERSION_PATCH 0x8000 |
| |
| /* Base class for playstation devices. */ |
| struct ps_device { |
| struct list_head list; |
| struct hid_device *hdev; |
| spinlock_t lock; |
| |
| uint32_t player_id; |
| |
| struct power_supply_desc battery_desc; |
| struct power_supply *battery; |
| uint8_t battery_capacity; |
| int battery_status; |
| |
| const char *input_dev_name; /* Name of primary input device. */ |
| uint8_t mac_address[6]; /* Note: stored in little endian order. */ |
| uint32_t hw_version; |
| uint32_t fw_version; |
| |
| int (*parse_report)(struct ps_device *dev, struct hid_report *report, u8 *data, int size); |
| }; |
| |
| /* Calibration data for playstation motion sensors. */ |
| struct ps_calibration_data { |
| int abs_code; |
| short bias; |
| int sens_numer; |
| int sens_denom; |
| }; |
| |
| struct ps_led_info { |
| const char *name; |
| const char *color; |
| enum led_brightness (*brightness_get)(struct led_classdev *cdev); |
| int (*brightness_set)(struct led_classdev *cdev, enum led_brightness); |
| }; |
| |
| /* Seed values for DualShock4 / DualSense CRC32 for different report types. */ |
| #define PS_INPUT_CRC32_SEED 0xA1 |
| #define PS_OUTPUT_CRC32_SEED 0xA2 |
| #define PS_FEATURE_CRC32_SEED 0xA3 |
| |
| #define DS_INPUT_REPORT_USB 0x01 |
| #define DS_INPUT_REPORT_USB_SIZE 64 |
| #define DS_INPUT_REPORT_BT 0x31 |
| #define DS_INPUT_REPORT_BT_SIZE 78 |
| #define DS_OUTPUT_REPORT_USB 0x02 |
| #define DS_OUTPUT_REPORT_USB_SIZE 63 |
| #define DS_OUTPUT_REPORT_BT 0x31 |
| #define DS_OUTPUT_REPORT_BT_SIZE 78 |
| |
| #define DS_FEATURE_REPORT_CALIBRATION 0x05 |
| #define DS_FEATURE_REPORT_CALIBRATION_SIZE 41 |
| #define DS_FEATURE_REPORT_PAIRING_INFO 0x09 |
| #define DS_FEATURE_REPORT_PAIRING_INFO_SIZE 20 |
| #define DS_FEATURE_REPORT_FIRMWARE_INFO 0x20 |
| #define DS_FEATURE_REPORT_FIRMWARE_INFO_SIZE 64 |
| |
| /* Button masks for DualSense input report. */ |
| #define DS_BUTTONS0_HAT_SWITCH GENMASK(3, 0) |
| #define DS_BUTTONS0_SQUARE BIT(4) |
| #define DS_BUTTONS0_CROSS BIT(5) |
| #define DS_BUTTONS0_CIRCLE BIT(6) |
| #define DS_BUTTONS0_TRIANGLE BIT(7) |
| #define DS_BUTTONS1_L1 BIT(0) |
| #define DS_BUTTONS1_R1 BIT(1) |
| #define DS_BUTTONS1_L2 BIT(2) |
| #define DS_BUTTONS1_R2 BIT(3) |
| #define DS_BUTTONS1_CREATE BIT(4) |
| #define DS_BUTTONS1_OPTIONS BIT(5) |
| #define DS_BUTTONS1_L3 BIT(6) |
| #define DS_BUTTONS1_R3 BIT(7) |
| #define DS_BUTTONS2_PS_HOME BIT(0) |
| #define DS_BUTTONS2_TOUCHPAD BIT(1) |
| #define DS_BUTTONS2_MIC_MUTE BIT(2) |
| |
| /* Status field of DualSense input report. */ |
| #define DS_STATUS_BATTERY_CAPACITY GENMASK(3, 0) |
| #define DS_STATUS_CHARGING GENMASK(7, 4) |
| #define DS_STATUS_CHARGING_SHIFT 4 |
| |
| /* |
| * Status of a DualSense touch point contact. |
| * Contact IDs, with highest bit set are 'inactive' |
| * and any associated data is then invalid. |
| */ |
| #define DS_TOUCH_POINT_INACTIVE BIT(7) |
| |
| /* Magic value required in tag field of Bluetooth output report. */ |
| #define DS_OUTPUT_TAG 0x10 |
| /* Flags for DualSense output report. */ |
| #define DS_OUTPUT_VALID_FLAG0_COMPATIBLE_VIBRATION BIT(0) |
| #define DS_OUTPUT_VALID_FLAG0_HAPTICS_SELECT BIT(1) |
| #define DS_OUTPUT_VALID_FLAG1_MIC_MUTE_LED_CONTROL_ENABLE BIT(0) |
| #define DS_OUTPUT_VALID_FLAG1_POWER_SAVE_CONTROL_ENABLE BIT(1) |
| #define DS_OUTPUT_VALID_FLAG1_LIGHTBAR_CONTROL_ENABLE BIT(2) |
| #define DS_OUTPUT_VALID_FLAG1_RELEASE_LEDS BIT(3) |
| #define DS_OUTPUT_VALID_FLAG1_PLAYER_INDICATOR_CONTROL_ENABLE BIT(4) |
| #define DS_OUTPUT_VALID_FLAG2_LIGHTBAR_SETUP_CONTROL_ENABLE BIT(1) |
| #define DS_OUTPUT_POWER_SAVE_CONTROL_MIC_MUTE BIT(4) |
| #define DS_OUTPUT_LIGHTBAR_SETUP_LIGHT_OUT BIT(1) |
| |
| /* DualSense hardware limits */ |
| #define DS_ACC_RES_PER_G 8192 |
| #define DS_ACC_RANGE (4*DS_ACC_RES_PER_G) |
| #define DS_GYRO_RES_PER_DEG_S 1024 |
| #define DS_GYRO_RANGE (2048*DS_GYRO_RES_PER_DEG_S) |
| #define DS_TOUCHPAD_WIDTH 1920 |
| #define DS_TOUCHPAD_HEIGHT 1080 |
| |
| struct dualsense { |
| struct ps_device base; |
| struct input_dev *gamepad; |
| struct input_dev *sensors; |
| struct input_dev *touchpad; |
| |
| /* Calibration data for accelerometer and gyroscope. */ |
| struct ps_calibration_data accel_calib_data[3]; |
| struct ps_calibration_data gyro_calib_data[3]; |
| |
| /* Timestamp for sensor data */ |
| bool sensor_timestamp_initialized; |
| uint32_t prev_sensor_timestamp; |
| uint32_t sensor_timestamp_us; |
| |
| /* Compatible rumble state */ |
| bool update_rumble; |
| uint8_t motor_left; |
| uint8_t motor_right; |
| |
| /* RGB lightbar */ |
| struct led_classdev_mc lightbar; |
| bool update_lightbar; |
| uint8_t lightbar_red; |
| uint8_t lightbar_green; |
| uint8_t lightbar_blue; |
| |
| /* Microphone */ |
| bool update_mic_mute; |
| bool mic_muted; |
| bool last_btn_mic_state; |
| |
| /* Player leds */ |
| bool update_player_leds; |
| uint8_t player_leds_state; |
| struct led_classdev player_leds[5]; |
| |
| struct work_struct output_worker; |
| void *output_report_dmabuf; |
| uint8_t output_seq; /* Sequence number for output report. */ |
| }; |
| |
| struct dualsense_touch_point { |
| uint8_t contact; |
| uint8_t x_lo; |
| uint8_t x_hi:4, y_lo:4; |
| uint8_t y_hi; |
| } __packed; |
| static_assert(sizeof(struct dualsense_touch_point) == 4); |
| |
| /* Main DualSense input report excluding any BT/USB specific headers. */ |
| struct dualsense_input_report { |
| uint8_t x, y; |
| uint8_t rx, ry; |
| uint8_t z, rz; |
| uint8_t seq_number; |
| uint8_t buttons[4]; |
| uint8_t reserved[4]; |
| |
| /* Motion sensors */ |
| __le16 gyro[3]; /* x, y, z */ |
| __le16 accel[3]; /* x, y, z */ |
| __le32 sensor_timestamp; |
| uint8_t reserved2; |
| |
| /* Touchpad */ |
| struct dualsense_touch_point points[2]; |
| |
| uint8_t reserved3[12]; |
| uint8_t status; |
| uint8_t reserved4[10]; |
| } __packed; |
| /* Common input report size shared equals the size of the USB report minus 1 byte for ReportID. */ |
| static_assert(sizeof(struct dualsense_input_report) == DS_INPUT_REPORT_USB_SIZE - 1); |
| |
| /* Common data between DualSense BT/USB main output report. */ |
| struct dualsense_output_report_common { |
| uint8_t valid_flag0; |
| uint8_t valid_flag1; |
| |
| /* For DualShock 4 compatibility mode. */ |
| uint8_t motor_right; |
| uint8_t motor_left; |
| |
| /* Audio controls */ |
| uint8_t reserved[4]; |
| uint8_t mute_button_led; |
| |
| uint8_t power_save_control; |
| uint8_t reserved2[28]; |
| |
| /* LEDs and lightbar */ |
| uint8_t valid_flag2; |
| uint8_t reserved3[2]; |
| uint8_t lightbar_setup; |
| uint8_t led_brightness; |
| uint8_t player_leds; |
| uint8_t lightbar_red; |
| uint8_t lightbar_green; |
| uint8_t lightbar_blue; |
| } __packed; |
| static_assert(sizeof(struct dualsense_output_report_common) == 47); |
| |
| struct dualsense_output_report_bt { |
| uint8_t report_id; /* 0x31 */ |
| uint8_t seq_tag; |
| uint8_t tag; |
| struct dualsense_output_report_common common; |
| uint8_t reserved[24]; |
| __le32 crc32; |
| } __packed; |
| static_assert(sizeof(struct dualsense_output_report_bt) == DS_OUTPUT_REPORT_BT_SIZE); |
| |
| struct dualsense_output_report_usb { |
| uint8_t report_id; /* 0x02 */ |
| struct dualsense_output_report_common common; |
| uint8_t reserved[15]; |
| } __packed; |
| static_assert(sizeof(struct dualsense_output_report_usb) == DS_OUTPUT_REPORT_USB_SIZE); |
| |
| /* |
| * The DualSense has a main output report used to control most features. It is |
| * largely the same between Bluetooth and USB except for different headers and CRC. |
| * This structure hide the differences between the two to simplify sending output reports. |
| */ |
| struct dualsense_output_report { |
| uint8_t *data; /* Start of data */ |
| uint8_t len; /* Size of output report */ |
| |
| /* Points to Bluetooth data payload in case for a Bluetooth report else NULL. */ |
| struct dualsense_output_report_bt *bt; |
| /* Points to USB data payload in case for a USB report else NULL. */ |
| struct dualsense_output_report_usb *usb; |
| /* Points to common section of report, so past any headers. */ |
| struct dualsense_output_report_common *common; |
| }; |
| |
| /* |
| * Common gamepad buttons across DualShock 3 / 4 and DualSense. |
| * Note: for device with a touchpad, touchpad button is not included |
| * as it will be part of the touchpad device. |
| */ |
| static const int ps_gamepad_buttons[] = { |
| BTN_WEST, /* Square */ |
| BTN_NORTH, /* Triangle */ |
| BTN_EAST, /* Circle */ |
| BTN_SOUTH, /* Cross */ |
| BTN_TL, /* L1 */ |
| BTN_TR, /* R1 */ |
| BTN_TL2, /* L2 */ |
| BTN_TR2, /* R2 */ |
| BTN_SELECT, /* Create (PS5) / Share (PS4) */ |
| BTN_START, /* Option */ |
| BTN_THUMBL, /* L3 */ |
| BTN_THUMBR, /* R3 */ |
| BTN_MODE, /* PS Home */ |
| }; |
| |
| static const struct {int x; int y; } ps_gamepad_hat_mapping[] = { |
| {0, -1}, {1, -1}, {1, 0}, {1, 1}, {0, 1}, {-1, 1}, {-1, 0}, {-1, -1}, |
| {0, 0}, |
| }; |
| |
| static void dualsense_set_lightbar(struct dualsense *ds, uint8_t red, uint8_t green, uint8_t blue); |
| |
| /* |
| * Add a new ps_device to ps_devices if it doesn't exist. |
| * Return error on duplicate device, which can happen if the same |
| * device is connected using both Bluetooth and USB. |
| */ |
| static int ps_devices_list_add(struct ps_device *dev) |
| { |
| struct ps_device *entry; |
| |
| mutex_lock(&ps_devices_lock); |
| list_for_each_entry(entry, &ps_devices_list, list) { |
| if (!memcmp(entry->mac_address, dev->mac_address, sizeof(dev->mac_address))) { |
| hid_err(dev->hdev, "Duplicate device found for MAC address %pMR.\n", |
| dev->mac_address); |
| mutex_unlock(&ps_devices_lock); |
| return -EEXIST; |
| } |
| } |
| |
| list_add_tail(&dev->list, &ps_devices_list); |
| mutex_unlock(&ps_devices_lock); |
| return 0; |
| } |
| |
| static int ps_devices_list_remove(struct ps_device *dev) |
| { |
| mutex_lock(&ps_devices_lock); |
| list_del(&dev->list); |
| mutex_unlock(&ps_devices_lock); |
| return 0; |
| } |
| |
| static int ps_device_set_player_id(struct ps_device *dev) |
| { |
| int ret = ida_alloc(&ps_player_id_allocator, GFP_KERNEL); |
| |
| if (ret < 0) |
| return ret; |
| |
| dev->player_id = ret; |
| return 0; |
| } |
| |
| static void ps_device_release_player_id(struct ps_device *dev) |
| { |
| ida_free(&ps_player_id_allocator, dev->player_id); |
| |
| dev->player_id = U32_MAX; |
| } |
| |
| static struct input_dev *ps_allocate_input_dev(struct hid_device *hdev, const char *name_suffix) |
| { |
| struct input_dev *input_dev; |
| |
| input_dev = devm_input_allocate_device(&hdev->dev); |
| if (!input_dev) |
| return ERR_PTR(-ENOMEM); |
| |
| input_dev->id.bustype = hdev->bus; |
| input_dev->id.vendor = hdev->vendor; |
| input_dev->id.product = hdev->product; |
| input_dev->id.version = hdev->version; |
| input_dev->uniq = hdev->uniq; |
| |
| if (name_suffix) { |
| input_dev->name = devm_kasprintf(&hdev->dev, GFP_KERNEL, "%s %s", hdev->name, |
| name_suffix); |
| if (!input_dev->name) |
| return ERR_PTR(-ENOMEM); |
| } else { |
| input_dev->name = hdev->name; |
| } |
| |
| input_set_drvdata(input_dev, hdev); |
| |
| return input_dev; |
| } |
| |
| static enum power_supply_property ps_power_supply_props[] = { |
| POWER_SUPPLY_PROP_STATUS, |
| POWER_SUPPLY_PROP_PRESENT, |
| POWER_SUPPLY_PROP_CAPACITY, |
| POWER_SUPPLY_PROP_SCOPE, |
| }; |
| |
| static int ps_battery_get_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct ps_device *dev = power_supply_get_drvdata(psy); |
| uint8_t battery_capacity; |
| int battery_status; |
| unsigned long flags; |
| int ret = 0; |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| battery_capacity = dev->battery_capacity; |
| battery_status = dev->battery_status; |
| spin_unlock_irqrestore(&dev->lock, flags); |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_STATUS: |
| val->intval = battery_status; |
| break; |
| case POWER_SUPPLY_PROP_PRESENT: |
| val->intval = 1; |
| break; |
| case POWER_SUPPLY_PROP_CAPACITY: |
| val->intval = battery_capacity; |
| break; |
| case POWER_SUPPLY_PROP_SCOPE: |
| val->intval = POWER_SUPPLY_SCOPE_DEVICE; |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int ps_device_register_battery(struct ps_device *dev) |
| { |
| struct power_supply *battery; |
| struct power_supply_config battery_cfg = { .drv_data = dev }; |
| int ret; |
| |
| dev->battery_desc.type = POWER_SUPPLY_TYPE_BATTERY; |
| dev->battery_desc.properties = ps_power_supply_props; |
| dev->battery_desc.num_properties = ARRAY_SIZE(ps_power_supply_props); |
| dev->battery_desc.get_property = ps_battery_get_property; |
| dev->battery_desc.name = devm_kasprintf(&dev->hdev->dev, GFP_KERNEL, |
| "ps-controller-battery-%pMR", dev->mac_address); |
| if (!dev->battery_desc.name) |
| return -ENOMEM; |
| |
| battery = devm_power_supply_register(&dev->hdev->dev, &dev->battery_desc, &battery_cfg); |
| if (IS_ERR(battery)) { |
| ret = PTR_ERR(battery); |
| hid_err(dev->hdev, "Unable to register battery device: %d\n", ret); |
| return ret; |
| } |
| dev->battery = battery; |
| |
| ret = power_supply_powers(dev->battery, &dev->hdev->dev); |
| if (ret) { |
| hid_err(dev->hdev, "Unable to activate battery device: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| /* Compute crc32 of HID data and compare against expected CRC. */ |
| static bool ps_check_crc32(uint8_t seed, uint8_t *data, size_t len, uint32_t report_crc) |
| { |
| uint32_t crc; |
| |
| crc = crc32_le(0xFFFFFFFF, &seed, 1); |
| crc = ~crc32_le(crc, data, len); |
| |
| return crc == report_crc; |
| } |
| |
| static struct input_dev *ps_gamepad_create(struct hid_device *hdev, |
| int (*play_effect)(struct input_dev *, void *, struct ff_effect *)) |
| { |
| struct input_dev *gamepad; |
| unsigned int i; |
| int ret; |
| |
| gamepad = ps_allocate_input_dev(hdev, NULL); |
| if (IS_ERR(gamepad)) |
| return ERR_CAST(gamepad); |
| |
| input_set_abs_params(gamepad, ABS_X, 0, 255, 0, 0); |
| input_set_abs_params(gamepad, ABS_Y, 0, 255, 0, 0); |
| input_set_abs_params(gamepad, ABS_Z, 0, 255, 0, 0); |
| input_set_abs_params(gamepad, ABS_RX, 0, 255, 0, 0); |
| input_set_abs_params(gamepad, ABS_RY, 0, 255, 0, 0); |
| input_set_abs_params(gamepad, ABS_RZ, 0, 255, 0, 0); |
| |
| input_set_abs_params(gamepad, ABS_HAT0X, -1, 1, 0, 0); |
| input_set_abs_params(gamepad, ABS_HAT0Y, -1, 1, 0, 0); |
| |
| for (i = 0; i < ARRAY_SIZE(ps_gamepad_buttons); i++) |
| input_set_capability(gamepad, EV_KEY, ps_gamepad_buttons[i]); |
| |
| #if IS_ENABLED(CONFIG_PLAYSTATION_FF) |
| if (play_effect) { |
| input_set_capability(gamepad, EV_FF, FF_RUMBLE); |
| input_ff_create_memless(gamepad, NULL, play_effect); |
| } |
| #endif |
| |
| ret = input_register_device(gamepad); |
| if (ret) |
| return ERR_PTR(ret); |
| |
| return gamepad; |
| } |
| |
| static int ps_get_report(struct hid_device *hdev, uint8_t report_id, uint8_t *buf, size_t size) |
| { |
| int ret; |
| |
| ret = hid_hw_raw_request(hdev, report_id, buf, size, HID_FEATURE_REPORT, |
| HID_REQ_GET_REPORT); |
| if (ret < 0) { |
| hid_err(hdev, "Failed to retrieve feature with reportID %d: %d\n", report_id, ret); |
| return ret; |
| } |
| |
| if (ret != size) { |
| hid_err(hdev, "Invalid byte count transferred, expected %zu got %d\n", size, ret); |
| return -EINVAL; |
| } |
| |
| if (buf[0] != report_id) { |
| hid_err(hdev, "Invalid reportID received, expected %d got %d\n", report_id, buf[0]); |
| return -EINVAL; |
| } |
| |
| if (hdev->bus == BUS_BLUETOOTH) { |
| /* Last 4 bytes contains crc32. */ |
| uint8_t crc_offset = size - 4; |
| uint32_t report_crc = get_unaligned_le32(&buf[crc_offset]); |
| |
| if (!ps_check_crc32(PS_FEATURE_CRC32_SEED, buf, crc_offset, report_crc)) { |
| hid_err(hdev, "CRC check failed for reportID=%d\n", report_id); |
| return -EILSEQ; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int ps_led_register(struct ps_device *ps_dev, struct led_classdev *led, |
| const struct ps_led_info *led_info) |
| { |
| int ret; |
| |
| led->name = devm_kasprintf(&ps_dev->hdev->dev, GFP_KERNEL, |
| "%s:%s:%s", ps_dev->input_dev_name, led_info->color, led_info->name); |
| |
| if (!led->name) |
| return -ENOMEM; |
| |
| led->brightness = 0; |
| led->max_brightness = 1; |
| led->flags = LED_CORE_SUSPENDRESUME; |
| led->brightness_get = led_info->brightness_get; |
| led->brightness_set_blocking = led_info->brightness_set; |
| |
| ret = devm_led_classdev_register(&ps_dev->hdev->dev, led); |
| if (ret) { |
| hid_err(ps_dev->hdev, "Failed to register LED %s: %d\n", led_info->name, ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| /* Register a DualSense/DualShock4 RGB lightbar represented by a multicolor LED. */ |
| static int ps_lightbar_register(struct ps_device *ps_dev, struct led_classdev_mc *lightbar_mc_dev, |
| int (*brightness_set)(struct led_classdev *, enum led_brightness)) |
| { |
| struct hid_device *hdev = ps_dev->hdev; |
| struct mc_subled *mc_led_info; |
| struct led_classdev *led_cdev; |
| int ret; |
| |
| mc_led_info = devm_kmalloc_array(&hdev->dev, 3, sizeof(*mc_led_info), |
| GFP_KERNEL | __GFP_ZERO); |
| if (!mc_led_info) |
| return -ENOMEM; |
| |
| mc_led_info[0].color_index = LED_COLOR_ID_RED; |
| mc_led_info[1].color_index = LED_COLOR_ID_GREEN; |
| mc_led_info[2].color_index = LED_COLOR_ID_BLUE; |
| |
| lightbar_mc_dev->subled_info = mc_led_info; |
| lightbar_mc_dev->num_colors = 3; |
| |
| led_cdev = &lightbar_mc_dev->led_cdev; |
| led_cdev->name = devm_kasprintf(&hdev->dev, GFP_KERNEL, "%s:rgb:indicator", |
| ps_dev->input_dev_name); |
| if (!led_cdev->name) |
| return -ENOMEM; |
| led_cdev->brightness = 255; |
| led_cdev->max_brightness = 255; |
| led_cdev->brightness_set_blocking = brightness_set; |
| |
| ret = devm_led_classdev_multicolor_register(&hdev->dev, lightbar_mc_dev); |
| if (ret < 0) { |
| hid_err(hdev, "Cannot register multicolor LED device\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static struct input_dev *ps_sensors_create(struct hid_device *hdev, int accel_range, int accel_res, |
| int gyro_range, int gyro_res) |
| { |
| struct input_dev *sensors; |
| int ret; |
| |
| sensors = ps_allocate_input_dev(hdev, "Motion Sensors"); |
| if (IS_ERR(sensors)) |
| return ERR_CAST(sensors); |
| |
| __set_bit(INPUT_PROP_ACCELEROMETER, sensors->propbit); |
| __set_bit(EV_MSC, sensors->evbit); |
| __set_bit(MSC_TIMESTAMP, sensors->mscbit); |
| |
| /* Accelerometer */ |
| input_set_abs_params(sensors, ABS_X, -accel_range, accel_range, 16, 0); |
| input_set_abs_params(sensors, ABS_Y, -accel_range, accel_range, 16, 0); |
| input_set_abs_params(sensors, ABS_Z, -accel_range, accel_range, 16, 0); |
| input_abs_set_res(sensors, ABS_X, accel_res); |
| input_abs_set_res(sensors, ABS_Y, accel_res); |
| input_abs_set_res(sensors, ABS_Z, accel_res); |
| |
| /* Gyroscope */ |
| input_set_abs_params(sensors, ABS_RX, -gyro_range, gyro_range, 16, 0); |
| input_set_abs_params(sensors, ABS_RY, -gyro_range, gyro_range, 16, 0); |
| input_set_abs_params(sensors, ABS_RZ, -gyro_range, gyro_range, 16, 0); |
| input_abs_set_res(sensors, ABS_RX, gyro_res); |
| input_abs_set_res(sensors, ABS_RY, gyro_res); |
| input_abs_set_res(sensors, ABS_RZ, gyro_res); |
| |
| ret = input_register_device(sensors); |
| if (ret) |
| return ERR_PTR(ret); |
| |
| return sensors; |
| } |
| |
| static struct input_dev *ps_touchpad_create(struct hid_device *hdev, int width, int height, |
| unsigned int num_contacts) |
| { |
| struct input_dev *touchpad; |
| int ret; |
| |
| touchpad = ps_allocate_input_dev(hdev, "Touchpad"); |
| if (IS_ERR(touchpad)) |
| return ERR_CAST(touchpad); |
| |
| /* Map button underneath touchpad to BTN_LEFT. */ |
| input_set_capability(touchpad, EV_KEY, BTN_LEFT); |
| __set_bit(INPUT_PROP_BUTTONPAD, touchpad->propbit); |
| |
| input_set_abs_params(touchpad, ABS_MT_POSITION_X, 0, width - 1, 0, 0); |
| input_set_abs_params(touchpad, ABS_MT_POSITION_Y, 0, height - 1, 0, 0); |
| |
| ret = input_mt_init_slots(touchpad, num_contacts, INPUT_MT_POINTER); |
| if (ret) |
| return ERR_PTR(ret); |
| |
| ret = input_register_device(touchpad); |
| if (ret) |
| return ERR_PTR(ret); |
| |
| return touchpad; |
| } |
| |
| static ssize_t firmware_version_show(struct device *dev, |
| struct device_attribute |
| *attr, char *buf) |
| { |
| struct hid_device *hdev = to_hid_device(dev); |
| struct ps_device *ps_dev = hid_get_drvdata(hdev); |
| |
| return sysfs_emit(buf, "0x%08x\n", ps_dev->fw_version); |
| } |
| |
| static DEVICE_ATTR_RO(firmware_version); |
| |
| static ssize_t hardware_version_show(struct device *dev, |
| struct device_attribute |
| *attr, char *buf) |
| { |
| struct hid_device *hdev = to_hid_device(dev); |
| struct ps_device *ps_dev = hid_get_drvdata(hdev); |
| |
| return sysfs_emit(buf, "0x%08x\n", ps_dev->hw_version); |
| } |
| |
| static DEVICE_ATTR_RO(hardware_version); |
| |
| static struct attribute *ps_device_attrs[] = { |
| &dev_attr_firmware_version.attr, |
| &dev_attr_hardware_version.attr, |
| NULL |
| }; |
| ATTRIBUTE_GROUPS(ps_device); |
| |
| static int dualsense_get_calibration_data(struct dualsense *ds) |
| { |
| short gyro_pitch_bias, gyro_pitch_plus, gyro_pitch_minus; |
| short gyro_yaw_bias, gyro_yaw_plus, gyro_yaw_minus; |
| short gyro_roll_bias, gyro_roll_plus, gyro_roll_minus; |
| short gyro_speed_plus, gyro_speed_minus; |
| short acc_x_plus, acc_x_minus; |
| short acc_y_plus, acc_y_minus; |
| short acc_z_plus, acc_z_minus; |
| int speed_2x; |
| int range_2g; |
| int ret = 0; |
| uint8_t *buf; |
| |
| buf = kzalloc(DS_FEATURE_REPORT_CALIBRATION_SIZE, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| ret = ps_get_report(ds->base.hdev, DS_FEATURE_REPORT_CALIBRATION, buf, |
| DS_FEATURE_REPORT_CALIBRATION_SIZE); |
| if (ret) { |
| hid_err(ds->base.hdev, "Failed to retrieve DualSense calibration info: %d\n", ret); |
| goto err_free; |
| } |
| |
| gyro_pitch_bias = get_unaligned_le16(&buf[1]); |
| gyro_yaw_bias = get_unaligned_le16(&buf[3]); |
| gyro_roll_bias = get_unaligned_le16(&buf[5]); |
| gyro_pitch_plus = get_unaligned_le16(&buf[7]); |
| gyro_pitch_minus = get_unaligned_le16(&buf[9]); |
| gyro_yaw_plus = get_unaligned_le16(&buf[11]); |
| gyro_yaw_minus = get_unaligned_le16(&buf[13]); |
| gyro_roll_plus = get_unaligned_le16(&buf[15]); |
| gyro_roll_minus = get_unaligned_le16(&buf[17]); |
| gyro_speed_plus = get_unaligned_le16(&buf[19]); |
| gyro_speed_minus = get_unaligned_le16(&buf[21]); |
| acc_x_plus = get_unaligned_le16(&buf[23]); |
| acc_x_minus = get_unaligned_le16(&buf[25]); |
| acc_y_plus = get_unaligned_le16(&buf[27]); |
| acc_y_minus = get_unaligned_le16(&buf[29]); |
| acc_z_plus = get_unaligned_le16(&buf[31]); |
| acc_z_minus = get_unaligned_le16(&buf[33]); |
| |
| /* |
| * Set gyroscope calibration and normalization parameters. |
| * Data values will be normalized to 1/DS_GYRO_RES_PER_DEG_S degree/s. |
| */ |
| speed_2x = (gyro_speed_plus + gyro_speed_minus); |
| ds->gyro_calib_data[0].abs_code = ABS_RX; |
| ds->gyro_calib_data[0].bias = gyro_pitch_bias; |
| ds->gyro_calib_data[0].sens_numer = speed_2x*DS_GYRO_RES_PER_DEG_S; |
| ds->gyro_calib_data[0].sens_denom = gyro_pitch_plus - gyro_pitch_minus; |
| |
| ds->gyro_calib_data[1].abs_code = ABS_RY; |
| ds->gyro_calib_data[1].bias = gyro_yaw_bias; |
| ds->gyro_calib_data[1].sens_numer = speed_2x*DS_GYRO_RES_PER_DEG_S; |
| ds->gyro_calib_data[1].sens_denom = gyro_yaw_plus - gyro_yaw_minus; |
| |
| ds->gyro_calib_data[2].abs_code = ABS_RZ; |
| ds->gyro_calib_data[2].bias = gyro_roll_bias; |
| ds->gyro_calib_data[2].sens_numer = speed_2x*DS_GYRO_RES_PER_DEG_S; |
| ds->gyro_calib_data[2].sens_denom = gyro_roll_plus - gyro_roll_minus; |
| |
| /* |
| * Set accelerometer calibration and normalization parameters. |
| * Data values will be normalized to 1/DS_ACC_RES_PER_G g. |
| */ |
| range_2g = acc_x_plus - acc_x_minus; |
| ds->accel_calib_data[0].abs_code = ABS_X; |
| ds->accel_calib_data[0].bias = acc_x_plus - range_2g / 2; |
| ds->accel_calib_data[0].sens_numer = 2*DS_ACC_RES_PER_G; |
| ds->accel_calib_data[0].sens_denom = range_2g; |
| |
| range_2g = acc_y_plus - acc_y_minus; |
| ds->accel_calib_data[1].abs_code = ABS_Y; |
| ds->accel_calib_data[1].bias = acc_y_plus - range_2g / 2; |
| ds->accel_calib_data[1].sens_numer = 2*DS_ACC_RES_PER_G; |
| ds->accel_calib_data[1].sens_denom = range_2g; |
| |
| range_2g = acc_z_plus - acc_z_minus; |
| ds->accel_calib_data[2].abs_code = ABS_Z; |
| ds->accel_calib_data[2].bias = acc_z_plus - range_2g / 2; |
| ds->accel_calib_data[2].sens_numer = 2*DS_ACC_RES_PER_G; |
| ds->accel_calib_data[2].sens_denom = range_2g; |
| |
| err_free: |
| kfree(buf); |
| return ret; |
| } |
| |
| static int dualsense_get_firmware_info(struct dualsense *ds) |
| { |
| uint8_t *buf; |
| int ret; |
| |
| buf = kzalloc(DS_FEATURE_REPORT_FIRMWARE_INFO_SIZE, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| ret = ps_get_report(ds->base.hdev, DS_FEATURE_REPORT_FIRMWARE_INFO, buf, |
| DS_FEATURE_REPORT_FIRMWARE_INFO_SIZE); |
| if (ret) { |
| hid_err(ds->base.hdev, "Failed to retrieve DualSense firmware info: %d\n", ret); |
| goto err_free; |
| } |
| |
| ds->base.hw_version = get_unaligned_le32(&buf[24]); |
| ds->base.fw_version = get_unaligned_le32(&buf[28]); |
| |
| err_free: |
| kfree(buf); |
| return ret; |
| } |
| |
| static int dualsense_get_mac_address(struct dualsense *ds) |
| { |
| uint8_t *buf; |
| int ret = 0; |
| |
| buf = kzalloc(DS_FEATURE_REPORT_PAIRING_INFO_SIZE, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| ret = ps_get_report(ds->base.hdev, DS_FEATURE_REPORT_PAIRING_INFO, buf, |
| DS_FEATURE_REPORT_PAIRING_INFO_SIZE); |
| if (ret) { |
| hid_err(ds->base.hdev, "Failed to retrieve DualSense pairing info: %d\n", ret); |
| goto err_free; |
| } |
| |
| memcpy(ds->base.mac_address, &buf[1], sizeof(ds->base.mac_address)); |
| |
| err_free: |
| kfree(buf); |
| return ret; |
| } |
| |
| static int dualsense_lightbar_set_brightness(struct led_classdev *cdev, |
| enum led_brightness brightness) |
| { |
| struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(cdev); |
| struct dualsense *ds = container_of(mc_cdev, struct dualsense, lightbar); |
| uint8_t red, green, blue; |
| |
| led_mc_calc_color_components(mc_cdev, brightness); |
| red = mc_cdev->subled_info[0].brightness; |
| green = mc_cdev->subled_info[1].brightness; |
| blue = mc_cdev->subled_info[2].brightness; |
| |
| dualsense_set_lightbar(ds, red, green, blue); |
| return 0; |
| } |
| |
| static enum led_brightness dualsense_player_led_get_brightness(struct led_classdev *led) |
| { |
| struct hid_device *hdev = to_hid_device(led->dev->parent); |
| struct dualsense *ds = hid_get_drvdata(hdev); |
| |
| return !!(ds->player_leds_state & BIT(led - ds->player_leds)); |
| } |
| |
| static int dualsense_player_led_set_brightness(struct led_classdev *led, enum led_brightness value) |
| { |
| struct hid_device *hdev = to_hid_device(led->dev->parent); |
| struct dualsense *ds = hid_get_drvdata(hdev); |
| unsigned long flags; |
| unsigned int led_index; |
| |
| spin_lock_irqsave(&ds->base.lock, flags); |
| |
| led_index = led - ds->player_leds; |
| if (value == LED_OFF) |
| ds->player_leds_state &= ~BIT(led_index); |
| else |
| ds->player_leds_state |= BIT(led_index); |
| |
| ds->update_player_leds = true; |
| spin_unlock_irqrestore(&ds->base.lock, flags); |
| |
| schedule_work(&ds->output_worker); |
| |
| return 0; |
| } |
| |
| static void dualsense_init_output_report(struct dualsense *ds, struct dualsense_output_report *rp, |
| void *buf) |
| { |
| struct hid_device *hdev = ds->base.hdev; |
| |
| if (hdev->bus == BUS_BLUETOOTH) { |
| struct dualsense_output_report_bt *bt = buf; |
| |
| memset(bt, 0, sizeof(*bt)); |
| bt->report_id = DS_OUTPUT_REPORT_BT; |
| bt->tag = DS_OUTPUT_TAG; /* Tag must be set. Exact meaning is unclear. */ |
| |
| /* |
| * Highest 4-bit is a sequence number, which needs to be increased |
| * every report. Lowest 4-bit is tag and can be zero for now. |
| */ |
| bt->seq_tag = (ds->output_seq << 4) | 0x0; |
| if (++ds->output_seq == 16) |
| ds->output_seq = 0; |
| |
| rp->data = buf; |
| rp->len = sizeof(*bt); |
| rp->bt = bt; |
| rp->usb = NULL; |
| rp->common = &bt->common; |
| } else { /* USB */ |
| struct dualsense_output_report_usb *usb = buf; |
| |
| memset(usb, 0, sizeof(*usb)); |
| usb->report_id = DS_OUTPUT_REPORT_USB; |
| |
| rp->data = buf; |
| rp->len = sizeof(*usb); |
| rp->bt = NULL; |
| rp->usb = usb; |
| rp->common = &usb->common; |
| } |
| } |
| |
| /* |
| * Helper function to send DualSense output reports. Applies a CRC at the end of a report |
| * for Bluetooth reports. |
| */ |
| static void dualsense_send_output_report(struct dualsense *ds, |
| struct dualsense_output_report *report) |
| { |
| struct hid_device *hdev = ds->base.hdev; |
| |
| /* Bluetooth packets need to be signed with a CRC in the last 4 bytes. */ |
| if (report->bt) { |
| uint32_t crc; |
| uint8_t seed = PS_OUTPUT_CRC32_SEED; |
| |
| crc = crc32_le(0xFFFFFFFF, &seed, 1); |
| crc = ~crc32_le(crc, report->data, report->len - 4); |
| |
| report->bt->crc32 = cpu_to_le32(crc); |
| } |
| |
| hid_hw_output_report(hdev, report->data, report->len); |
| } |
| |
| static void dualsense_output_worker(struct work_struct *work) |
| { |
| struct dualsense *ds = container_of(work, struct dualsense, output_worker); |
| struct dualsense_output_report report; |
| struct dualsense_output_report_common *common; |
| unsigned long flags; |
| |
| dualsense_init_output_report(ds, &report, ds->output_report_dmabuf); |
| common = report.common; |
| |
| spin_lock_irqsave(&ds->base.lock, flags); |
| |
| if (ds->update_rumble) { |
| /* Select classic rumble style haptics and enable it. */ |
| common->valid_flag0 |= DS_OUTPUT_VALID_FLAG0_HAPTICS_SELECT; |
| common->valid_flag0 |= DS_OUTPUT_VALID_FLAG0_COMPATIBLE_VIBRATION; |
| common->motor_left = ds->motor_left; |
| common->motor_right = ds->motor_right; |
| ds->update_rumble = false; |
| } |
| |
| if (ds->update_lightbar) { |
| common->valid_flag1 |= DS_OUTPUT_VALID_FLAG1_LIGHTBAR_CONTROL_ENABLE; |
| common->lightbar_red = ds->lightbar_red; |
| common->lightbar_green = ds->lightbar_green; |
| common->lightbar_blue = ds->lightbar_blue; |
| |
| ds->update_lightbar = false; |
| } |
| |
| if (ds->update_player_leds) { |
| common->valid_flag1 |= DS_OUTPUT_VALID_FLAG1_PLAYER_INDICATOR_CONTROL_ENABLE; |
| common->player_leds = ds->player_leds_state; |
| |
| ds->update_player_leds = false; |
| } |
| |
| if (ds->update_mic_mute) { |
| common->valid_flag1 |= DS_OUTPUT_VALID_FLAG1_MIC_MUTE_LED_CONTROL_ENABLE; |
| common->mute_button_led = ds->mic_muted; |
| |
| if (ds->mic_muted) { |
| /* Disable microphone */ |
| common->valid_flag1 |= DS_OUTPUT_VALID_FLAG1_POWER_SAVE_CONTROL_ENABLE; |
| common->power_save_control |= DS_OUTPUT_POWER_SAVE_CONTROL_MIC_MUTE; |
| } else { |
| /* Enable microphone */ |
| common->valid_flag1 |= DS_OUTPUT_VALID_FLAG1_POWER_SAVE_CONTROL_ENABLE; |
| common->power_save_control &= ~DS_OUTPUT_POWER_SAVE_CONTROL_MIC_MUTE; |
| } |
| |
| ds->update_mic_mute = false; |
| } |
| |
| spin_unlock_irqrestore(&ds->base.lock, flags); |
| |
| dualsense_send_output_report(ds, &report); |
| } |
| |
| static int dualsense_parse_report(struct ps_device *ps_dev, struct hid_report *report, |
| u8 *data, int size) |
| { |
| struct hid_device *hdev = ps_dev->hdev; |
| struct dualsense *ds = container_of(ps_dev, struct dualsense, base); |
| struct dualsense_input_report *ds_report; |
| uint8_t battery_data, battery_capacity, charging_status, value; |
| int battery_status; |
| uint32_t sensor_timestamp; |
| bool btn_mic_state; |
| unsigned long flags; |
| int i; |
| |
| /* |
| * DualSense in USB uses the full HID report for reportID 1, but |
| * Bluetooth uses a minimal HID report for reportID 1 and reports |
| * the full report using reportID 49. |
| */ |
| if (hdev->bus == BUS_USB && report->id == DS_INPUT_REPORT_USB && |
| size == DS_INPUT_REPORT_USB_SIZE) { |
| ds_report = (struct dualsense_input_report *)&data[1]; |
| } else if (hdev->bus == BUS_BLUETOOTH && report->id == DS_INPUT_REPORT_BT && |
| size == DS_INPUT_REPORT_BT_SIZE) { |
| /* Last 4 bytes of input report contain crc32 */ |
| uint32_t report_crc = get_unaligned_le32(&data[size - 4]); |
| |
| if (!ps_check_crc32(PS_INPUT_CRC32_SEED, data, size - 4, report_crc)) { |
| hid_err(hdev, "DualSense input CRC's check failed\n"); |
| return -EILSEQ; |
| } |
| |
| ds_report = (struct dualsense_input_report *)&data[2]; |
| } else { |
| hid_err(hdev, "Unhandled reportID=%d\n", report->id); |
| return -1; |
| } |
| |
| input_report_abs(ds->gamepad, ABS_X, ds_report->x); |
| input_report_abs(ds->gamepad, ABS_Y, ds_report->y); |
| input_report_abs(ds->gamepad, ABS_RX, ds_report->rx); |
| input_report_abs(ds->gamepad, ABS_RY, ds_report->ry); |
| input_report_abs(ds->gamepad, ABS_Z, ds_report->z); |
| input_report_abs(ds->gamepad, ABS_RZ, ds_report->rz); |
| |
| value = ds_report->buttons[0] & DS_BUTTONS0_HAT_SWITCH; |
| if (value >= ARRAY_SIZE(ps_gamepad_hat_mapping)) |
| value = 8; /* center */ |
| input_report_abs(ds->gamepad, ABS_HAT0X, ps_gamepad_hat_mapping[value].x); |
| input_report_abs(ds->gamepad, ABS_HAT0Y, ps_gamepad_hat_mapping[value].y); |
| |
| input_report_key(ds->gamepad, BTN_WEST, ds_report->buttons[0] & DS_BUTTONS0_SQUARE); |
| input_report_key(ds->gamepad, BTN_SOUTH, ds_report->buttons[0] & DS_BUTTONS0_CROSS); |
| input_report_key(ds->gamepad, BTN_EAST, ds_report->buttons[0] & DS_BUTTONS0_CIRCLE); |
| input_report_key(ds->gamepad, BTN_NORTH, ds_report->buttons[0] & DS_BUTTONS0_TRIANGLE); |
| input_report_key(ds->gamepad, BTN_TL, ds_report->buttons[1] & DS_BUTTONS1_L1); |
| input_report_key(ds->gamepad, BTN_TR, ds_report->buttons[1] & DS_BUTTONS1_R1); |
| input_report_key(ds->gamepad, BTN_TL2, ds_report->buttons[1] & DS_BUTTONS1_L2); |
| input_report_key(ds->gamepad, BTN_TR2, ds_report->buttons[1] & DS_BUTTONS1_R2); |
| input_report_key(ds->gamepad, BTN_SELECT, ds_report->buttons[1] & DS_BUTTONS1_CREATE); |
| input_report_key(ds->gamepad, BTN_START, ds_report->buttons[1] & DS_BUTTONS1_OPTIONS); |
| input_report_key(ds->gamepad, BTN_THUMBL, ds_report->buttons[1] & DS_BUTTONS1_L3); |
| input_report_key(ds->gamepad, BTN_THUMBR, ds_report->buttons[1] & DS_BUTTONS1_R3); |
| input_report_key(ds->gamepad, BTN_MODE, ds_report->buttons[2] & DS_BUTTONS2_PS_HOME); |
| input_sync(ds->gamepad); |
| |
| /* |
| * The DualSense has an internal microphone, which can be muted through a mute button |
| * on the device. The driver is expected to read the button state and program the device |
| * to mute/unmute audio at the hardware level. |
| */ |
| btn_mic_state = !!(ds_report->buttons[2] & DS_BUTTONS2_MIC_MUTE); |
| if (btn_mic_state && !ds->last_btn_mic_state) { |
| spin_lock_irqsave(&ps_dev->lock, flags); |
| ds->update_mic_mute = true; |
| ds->mic_muted = !ds->mic_muted; /* toggle */ |
| spin_unlock_irqrestore(&ps_dev->lock, flags); |
| |
| /* Schedule updating of microphone state at hardware level. */ |
| schedule_work(&ds->output_worker); |
| } |
| ds->last_btn_mic_state = btn_mic_state; |
| |
| /* Parse and calibrate gyroscope data. */ |
| for (i = 0; i < ARRAY_SIZE(ds_report->gyro); i++) { |
| int raw_data = (short)le16_to_cpu(ds_report->gyro[i]); |
| int calib_data = mult_frac(ds->gyro_calib_data[i].sens_numer, |
| raw_data - ds->gyro_calib_data[i].bias, |
| ds->gyro_calib_data[i].sens_denom); |
| |
| input_report_abs(ds->sensors, ds->gyro_calib_data[i].abs_code, calib_data); |
| } |
| |
| /* Parse and calibrate accelerometer data. */ |
| for (i = 0; i < ARRAY_SIZE(ds_report->accel); i++) { |
| int raw_data = (short)le16_to_cpu(ds_report->accel[i]); |
| int calib_data = mult_frac(ds->accel_calib_data[i].sens_numer, |
| raw_data - ds->accel_calib_data[i].bias, |
| ds->accel_calib_data[i].sens_denom); |
| |
| input_report_abs(ds->sensors, ds->accel_calib_data[i].abs_code, calib_data); |
| } |
| |
| /* Convert timestamp (in 0.33us unit) to timestamp_us */ |
| sensor_timestamp = le32_to_cpu(ds_report->sensor_timestamp); |
| if (!ds->sensor_timestamp_initialized) { |
| ds->sensor_timestamp_us = DIV_ROUND_CLOSEST(sensor_timestamp, 3); |
| ds->sensor_timestamp_initialized = true; |
| } else { |
| uint32_t delta; |
| |
| if (ds->prev_sensor_timestamp > sensor_timestamp) |
| delta = (U32_MAX - ds->prev_sensor_timestamp + sensor_timestamp + 1); |
| else |
| delta = sensor_timestamp - ds->prev_sensor_timestamp; |
| ds->sensor_timestamp_us += DIV_ROUND_CLOSEST(delta, 3); |
| } |
| ds->prev_sensor_timestamp = sensor_timestamp; |
| input_event(ds->sensors, EV_MSC, MSC_TIMESTAMP, ds->sensor_timestamp_us); |
| input_sync(ds->sensors); |
| |
| for (i = 0; i < ARRAY_SIZE(ds_report->points); i++) { |
| struct dualsense_touch_point *point = &ds_report->points[i]; |
| bool active = (point->contact & DS_TOUCH_POINT_INACTIVE) ? false : true; |
| |
| input_mt_slot(ds->touchpad, i); |
| input_mt_report_slot_state(ds->touchpad, MT_TOOL_FINGER, active); |
| |
| if (active) { |
| int x = (point->x_hi << 8) | point->x_lo; |
| int y = (point->y_hi << 4) | point->y_lo; |
| |
| input_report_abs(ds->touchpad, ABS_MT_POSITION_X, x); |
| input_report_abs(ds->touchpad, ABS_MT_POSITION_Y, y); |
| } |
| } |
| input_mt_sync_frame(ds->touchpad); |
| input_report_key(ds->touchpad, BTN_LEFT, ds_report->buttons[2] & DS_BUTTONS2_TOUCHPAD); |
| input_sync(ds->touchpad); |
| |
| battery_data = ds_report->status & DS_STATUS_BATTERY_CAPACITY; |
| charging_status = (ds_report->status & DS_STATUS_CHARGING) >> DS_STATUS_CHARGING_SHIFT; |
| |
| switch (charging_status) { |
| case 0x0: |
| /* |
| * Each unit of battery data corresponds to 10% |
| * 0 = 0-9%, 1 = 10-19%, .. and 10 = 100% |
| */ |
| battery_capacity = min(battery_data * 10 + 5, 100); |
| battery_status = POWER_SUPPLY_STATUS_DISCHARGING; |
| break; |
| case 0x1: |
| battery_capacity = min(battery_data * 10 + 5, 100); |
| battery_status = POWER_SUPPLY_STATUS_CHARGING; |
| break; |
| case 0x2: |
| battery_capacity = 100; |
| battery_status = POWER_SUPPLY_STATUS_FULL; |
| break; |
| case 0xa: /* voltage or temperature out of range */ |
| case 0xb: /* temperature error */ |
| battery_capacity = 0; |
| battery_status = POWER_SUPPLY_STATUS_NOT_CHARGING; |
| break; |
| case 0xf: /* charging error */ |
| default: |
| battery_capacity = 0; |
| battery_status = POWER_SUPPLY_STATUS_UNKNOWN; |
| } |
| |
| spin_lock_irqsave(&ps_dev->lock, flags); |
| ps_dev->battery_capacity = battery_capacity; |
| ps_dev->battery_status = battery_status; |
| spin_unlock_irqrestore(&ps_dev->lock, flags); |
| |
| return 0; |
| } |
| |
| static int dualsense_play_effect(struct input_dev *dev, void *data, struct ff_effect *effect) |
| { |
| struct hid_device *hdev = input_get_drvdata(dev); |
| struct dualsense *ds = hid_get_drvdata(hdev); |
| unsigned long flags; |
| |
| if (effect->type != FF_RUMBLE) |
| return 0; |
| |
| spin_lock_irqsave(&ds->base.lock, flags); |
| ds->update_rumble = true; |
| ds->motor_left = effect->u.rumble.strong_magnitude / 256; |
| ds->motor_right = effect->u.rumble.weak_magnitude / 256; |
| spin_unlock_irqrestore(&ds->base.lock, flags); |
| |
| schedule_work(&ds->output_worker); |
| return 0; |
| } |
| |
| static int dualsense_reset_leds(struct dualsense *ds) |
| { |
| struct dualsense_output_report report; |
| uint8_t *buf; |
| |
| buf = kzalloc(sizeof(struct dualsense_output_report_bt), GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| dualsense_init_output_report(ds, &report, buf); |
| /* |
| * On Bluetooth the DualSense outputs an animation on the lightbar |
| * during startup and maintains a color afterwards. We need to explicitly |
| * reconfigure the lightbar before we can do any programming later on. |
| * In USB the lightbar is not on by default, but redoing the setup there |
| * doesn't hurt. |
| */ |
| report.common->valid_flag2 = DS_OUTPUT_VALID_FLAG2_LIGHTBAR_SETUP_CONTROL_ENABLE; |
| report.common->lightbar_setup = DS_OUTPUT_LIGHTBAR_SETUP_LIGHT_OUT; /* Fade light out. */ |
| dualsense_send_output_report(ds, &report); |
| |
| kfree(buf); |
| return 0; |
| } |
| |
| static void dualsense_set_lightbar(struct dualsense *ds, uint8_t red, uint8_t green, uint8_t blue) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&ds->base.lock, flags); |
| ds->update_lightbar = true; |
| ds->lightbar_red = red; |
| ds->lightbar_green = green; |
| ds->lightbar_blue = blue; |
| spin_unlock_irqrestore(&ds->base.lock, flags); |
| |
| schedule_work(&ds->output_worker); |
| } |
| |
| static void dualsense_set_player_leds(struct dualsense *ds) |
| { |
| /* |
| * The DualSense controller has a row of 5 LEDs used for player ids. |
| * Behavior on the PlayStation 5 console is to center the player id |
| * across the LEDs, so e.g. player 1 would be "--x--" with x being 'on'. |
| * Follow a similar mapping here. |
| */ |
| static const int player_ids[5] = { |
| BIT(2), |
| BIT(3) | BIT(1), |
| BIT(4) | BIT(2) | BIT(0), |
| BIT(4) | BIT(3) | BIT(1) | BIT(0), |
| BIT(4) | BIT(3) | BIT(2) | BIT(1) | BIT(0) |
| }; |
| |
| uint8_t player_id = ds->base.player_id % ARRAY_SIZE(player_ids); |
| |
| ds->update_player_leds = true; |
| ds->player_leds_state = player_ids[player_id]; |
| schedule_work(&ds->output_worker); |
| } |
| |
| static struct ps_device *dualsense_create(struct hid_device *hdev) |
| { |
| struct dualsense *ds; |
| struct ps_device *ps_dev; |
| uint8_t max_output_report_size; |
| int i, ret; |
| |
| static const struct ps_led_info player_leds_info[] = { |
| { LED_FUNCTION_PLAYER1, "white", dualsense_player_led_get_brightness, |
| dualsense_player_led_set_brightness }, |
| { LED_FUNCTION_PLAYER2, "white", dualsense_player_led_get_brightness, |
| dualsense_player_led_set_brightness }, |
| { LED_FUNCTION_PLAYER3, "white", dualsense_player_led_get_brightness, |
| dualsense_player_led_set_brightness }, |
| { LED_FUNCTION_PLAYER4, "white", dualsense_player_led_get_brightness, |
| dualsense_player_led_set_brightness }, |
| { LED_FUNCTION_PLAYER5, "white", dualsense_player_led_get_brightness, |
| dualsense_player_led_set_brightness } |
| }; |
| |
| ds = devm_kzalloc(&hdev->dev, sizeof(*ds), GFP_KERNEL); |
| if (!ds) |
| return ERR_PTR(-ENOMEM); |
| |
| /* |
| * Patch version to allow userspace to distinguish between |
| * hid-generic vs hid-playstation axis and button mapping. |
| */ |
| hdev->version |= HID_PLAYSTATION_VERSION_PATCH; |
| |
| ps_dev = &ds->base; |
| ps_dev->hdev = hdev; |
| spin_lock_init(&ps_dev->lock); |
| ps_dev->battery_capacity = 100; /* initial value until parse_report. */ |
| ps_dev->battery_status = POWER_SUPPLY_STATUS_UNKNOWN; |
| ps_dev->parse_report = dualsense_parse_report; |
| INIT_WORK(&ds->output_worker, dualsense_output_worker); |
| hid_set_drvdata(hdev, ds); |
| |
| max_output_report_size = sizeof(struct dualsense_output_report_bt); |
| ds->output_report_dmabuf = devm_kzalloc(&hdev->dev, max_output_report_size, GFP_KERNEL); |
| if (!ds->output_report_dmabuf) |
| return ERR_PTR(-ENOMEM); |
| |
| ret = dualsense_get_mac_address(ds); |
| if (ret) { |
| hid_err(hdev, "Failed to get MAC address from DualSense\n"); |
| return ERR_PTR(ret); |
| } |
| snprintf(hdev->uniq, sizeof(hdev->uniq), "%pMR", ds->base.mac_address); |
| |
| ret = dualsense_get_firmware_info(ds); |
| if (ret) { |
| hid_err(hdev, "Failed to get firmware info from DualSense\n"); |
| return ERR_PTR(ret); |
| } |
| |
| ret = ps_devices_list_add(ps_dev); |
| if (ret) |
| return ERR_PTR(ret); |
| |
| ret = dualsense_get_calibration_data(ds); |
| if (ret) { |
| hid_err(hdev, "Failed to get calibration data from DualSense\n"); |
| goto err; |
| } |
| |
| ds->gamepad = ps_gamepad_create(hdev, dualsense_play_effect); |
| if (IS_ERR(ds->gamepad)) { |
| ret = PTR_ERR(ds->gamepad); |
| goto err; |
| } |
| /* Use gamepad input device name as primary device name for e.g. LEDs */ |
| ps_dev->input_dev_name = dev_name(&ds->gamepad->dev); |
| |
| ds->sensors = ps_sensors_create(hdev, DS_ACC_RANGE, DS_ACC_RES_PER_G, |
| DS_GYRO_RANGE, DS_GYRO_RES_PER_DEG_S); |
| if (IS_ERR(ds->sensors)) { |
| ret = PTR_ERR(ds->sensors); |
| goto err; |
| } |
| |
| ds->touchpad = ps_touchpad_create(hdev, DS_TOUCHPAD_WIDTH, DS_TOUCHPAD_HEIGHT, 2); |
| if (IS_ERR(ds->touchpad)) { |
| ret = PTR_ERR(ds->touchpad); |
| goto err; |
| } |
| |
| ret = ps_device_register_battery(ps_dev); |
| if (ret) |
| goto err; |
| |
| /* |
| * The hardware may have control over the LEDs (e.g. in Bluetooth on startup). |
| * Reset the LEDs (lightbar, mute, player leds), so we can control them |
| * from software. |
| */ |
| ret = dualsense_reset_leds(ds); |
| if (ret) |
| goto err; |
| |
| ret = ps_lightbar_register(ps_dev, &ds->lightbar, dualsense_lightbar_set_brightness); |
| if (ret) |
| goto err; |
| |
| /* Set default lightbar color. */ |
| dualsense_set_lightbar(ds, 0, 0, 128); /* blue */ |
| |
| for (i = 0; i < ARRAY_SIZE(player_leds_info); i++) { |
| const struct ps_led_info *led_info = &player_leds_info[i]; |
| |
| ret = ps_led_register(ps_dev, &ds->player_leds[i], led_info); |
| if (ret < 0) |
| goto err; |
| } |
| |
| ret = ps_device_set_player_id(ps_dev); |
| if (ret) { |
| hid_err(hdev, "Failed to assign player id for DualSense: %d\n", ret); |
| goto err; |
| } |
| |
| /* Set player LEDs to our player id. */ |
| dualsense_set_player_leds(ds); |
| |
| /* |
| * Reporting hardware and firmware is important as there are frequent updates, which |
| * can change behavior. |
| */ |
| hid_info(hdev, "Registered DualSense controller hw_version=0x%08x fw_version=0x%08x\n", |
| ds->base.hw_version, ds->base.fw_version); |
| |
| return &ds->base; |
| |
| err: |
| ps_devices_list_remove(ps_dev); |
| return ERR_PTR(ret); |
| } |
| |
| static int ps_raw_event(struct hid_device *hdev, struct hid_report *report, |
| u8 *data, int size) |
| { |
| struct ps_device *dev = hid_get_drvdata(hdev); |
| |
| if (dev && dev->parse_report) |
| return dev->parse_report(dev, report, data, size); |
| |
| return 0; |
| } |
| |
| static int ps_probe(struct hid_device *hdev, const struct hid_device_id *id) |
| { |
| struct ps_device *dev; |
| int ret; |
| |
| ret = hid_parse(hdev); |
| if (ret) { |
| hid_err(hdev, "Parse failed\n"); |
| return ret; |
| } |
| |
| ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW); |
| if (ret) { |
| hid_err(hdev, "Failed to start HID device\n"); |
| return ret; |
| } |
| |
| ret = hid_hw_open(hdev); |
| if (ret) { |
| hid_err(hdev, "Failed to open HID device\n"); |
| goto err_stop; |
| } |
| |
| if (hdev->product == USB_DEVICE_ID_SONY_PS5_CONTROLLER) { |
| dev = dualsense_create(hdev); |
| if (IS_ERR(dev)) { |
| hid_err(hdev, "Failed to create dualsense.\n"); |
| ret = PTR_ERR(dev); |
| goto err_close; |
| } |
| } |
| |
| return ret; |
| |
| err_close: |
| hid_hw_close(hdev); |
| err_stop: |
| hid_hw_stop(hdev); |
| return ret; |
| } |
| |
| static void ps_remove(struct hid_device *hdev) |
| { |
| struct ps_device *dev = hid_get_drvdata(hdev); |
| |
| ps_devices_list_remove(dev); |
| ps_device_release_player_id(dev); |
| |
| hid_hw_close(hdev); |
| hid_hw_stop(hdev); |
| } |
| |
| static const struct hid_device_id ps_devices[] = { |
| { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS5_CONTROLLER) }, |
| { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS5_CONTROLLER) }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(hid, ps_devices); |
| |
| static struct hid_driver ps_driver = { |
| .name = "playstation", |
| .id_table = ps_devices, |
| .probe = ps_probe, |
| .remove = ps_remove, |
| .raw_event = ps_raw_event, |
| .driver = { |
| .dev_groups = ps_device_groups, |
| }, |
| }; |
| |
| static int __init ps_init(void) |
| { |
| return hid_register_driver(&ps_driver); |
| } |
| |
| static void __exit ps_exit(void) |
| { |
| hid_unregister_driver(&ps_driver); |
| ida_destroy(&ps_player_id_allocator); |
| } |
| |
| module_init(ps_init); |
| module_exit(ps_exit); |
| |
| MODULE_AUTHOR("Sony Interactive Entertainment"); |
| MODULE_DESCRIPTION("HID Driver for PlayStation peripherals."); |
| MODULE_LICENSE("GPL"); |