[PATCH] S2io: MSI/MSI-X support (runtime configurable)
This patch adds support for MSI/MSI-X feature to the driver. It is
a runtime parameter(for now, loadable parameter). Default is INTA.
Patch has been tested on IA64 platform with Xframe II adapter,
both of which support MSI-X feature. An improvement of about 7%
in throughput(both Tx and Rx) was observed and a reduction by 7%
in CPU utilization during Tx test.
Signed-off-by: Ravinandan Arakali <ravinandan.arakali@neterion.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index dd451e0..4b9f182 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -67,7 +67,7 @@
/* S2io Driver name & version. */
static char s2io_driver_name[] = "Neterion";
-static char s2io_driver_version[] = "Version 2.0.8.1";
+static char s2io_driver_version[] = "Version 2.0.9.1";
static inline int RXD_IS_UP2DT(RxD_t *rxdp)
{
@@ -307,6 +307,8 @@
#endif
/* Frequency of Rx desc syncs expressed as power of 2 */
static unsigned int rxsync_frequency = 3;
+/* Interrupt type. Values can be 0(INTA), 1(MSI), 2(MSI_X) */
+static unsigned int intr_type = 0;
/*
* S2IO device table.
@@ -1396,8 +1398,13 @@
writeq(val64, &bar0->rti_data1_mem);
val64 = RTI_DATA2_MEM_RX_UFC_A(0x1) |
- RTI_DATA2_MEM_RX_UFC_B(0x2) |
- RTI_DATA2_MEM_RX_UFC_C(0x40) | RTI_DATA2_MEM_RX_UFC_D(0x80);
+ RTI_DATA2_MEM_RX_UFC_B(0x2) ;
+ if (nic->intr_type == MSI_X)
+ val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x20) | \
+ RTI_DATA2_MEM_RX_UFC_D(0x40));
+ else
+ val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x40) | \
+ RTI_DATA2_MEM_RX_UFC_D(0x80));
writeq(val64, &bar0->rti_data2_mem);
for (i = 0; i < config->rx_ring_num; i++) {
@@ -1507,17 +1514,15 @@
#define LINK_UP_DOWN_INTERRUPT 1
#define MAC_RMAC_ERR_TIMER 2
-#if defined(CONFIG_MSI_MODE) || defined(CONFIG_MSIX_MODE)
-#define s2io_link_fault_indication(x) MAC_RMAC_ERR_TIMER
-#else
int s2io_link_fault_indication(nic_t *nic)
{
+ if (nic->intr_type != INTA)
+ return MAC_RMAC_ERR_TIMER;
if (nic->device_type == XFRAME_II_DEVICE)
return LINK_UP_DOWN_INTERRUPT;
else
return MAC_RMAC_ERR_TIMER;
}
-#endif
/**
* en_dis_able_nic_intrs - Enable or Disable the interrupts
@@ -1941,11 +1946,14 @@
}
/* Enable select interrupts */
- interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
- interruptible |= TX_PIC_INTR | RX_PIC_INTR;
- interruptible |= TX_MAC_INTR | RX_MAC_INTR;
-
- en_dis_able_nic_intrs(nic, interruptible, ENABLE_INTRS);
+ if (nic->intr_type != INTA)
+ en_dis_able_nic_intrs(nic, ENA_ALL_INTRS, DISABLE_INTRS);
+ else {
+ interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
+ interruptible |= TX_PIC_INTR | RX_PIC_INTR;
+ interruptible |= TX_MAC_INTR | RX_MAC_INTR;
+ en_dis_able_nic_intrs(nic, interruptible, ENABLE_INTRS);
+ }
/*
* With some switches, link might be already up at this point.
@@ -2633,11 +2641,11 @@
err = txdlp->Control_1 & TXD_T_CODE;
if ((err >> 48) == 0xA) {
DBG_PRINT(TX_DBG, "TxD returned due \
- to loss of link\n");
+to loss of link\n");
}
else {
DBG_PRINT(ERR_DBG, "***TxD error \
- %llx\n", err);
+%llx\n", err);
}
}
@@ -2854,6 +2862,9 @@
/* Set swapper to enable I/O register access */
s2io_set_swapper(sp);
+ /* Restore the MSIX table entries from local variables */
+ restore_xmsi_data(sp);
+
/* Clear certain PCI/PCI-X fields after reset */
if (sp->device_type == XFRAME_II_DEVICE) {
/* Clear parity err detect bit */
@@ -2983,8 +2994,9 @@
SWAPPER_CTRL_RXD_W_FE |
SWAPPER_CTRL_RXF_W_FE |
SWAPPER_CTRL_XMSI_FE |
- SWAPPER_CTRL_XMSI_SE |
SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE);
+ if (nic->intr_type == INTA)
+ val64 |= SWAPPER_CTRL_XMSI_SE;
writeq(val64, &bar0->swapper_ctrl);
#else
/*
@@ -3005,8 +3017,9 @@
SWAPPER_CTRL_RXD_W_SE |
SWAPPER_CTRL_RXF_W_FE |
SWAPPER_CTRL_XMSI_FE |
- SWAPPER_CTRL_XMSI_SE |
SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE);
+ if (sp->intr_type == INTA)
+ val64 |= SWAPPER_CTRL_XMSI_SE;
writeq(val64, &bar0->swapper_ctrl);
#endif
val64 = readq(&bar0->swapper_ctrl);
@@ -3028,6 +3041,201 @@
return SUCCESS;
}
+int wait_for_msix_trans(nic_t *nic, int i)
+{
+ XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
+ u64 val64;
+ int ret = 0, cnt = 0;
+
+ do {
+ val64 = readq(&bar0->xmsi_access);
+ if (!(val64 & BIT(15)))
+ break;
+ mdelay(1);
+ cnt++;
+ } while(cnt < 5);
+ if (cnt == 5) {
+ DBG_PRINT(ERR_DBG, "XMSI # %d Access failed\n", i);
+ ret = 1;
+ }
+
+ return ret;
+}
+
+void restore_xmsi_data(nic_t *nic)
+{
+ XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
+ u64 val64;
+ int i;
+
+ for (i=0; i< MAX_REQUESTED_MSI_X; i++) {
+ writeq(nic->msix_info[i].addr, &bar0->xmsi_address);
+ writeq(nic->msix_info[i].data, &bar0->xmsi_data);
+ val64 = (BIT(7) | BIT(15) | vBIT(i, 26, 6));
+ writeq(val64, &bar0->xmsi_access);
+ if (wait_for_msix_trans(nic, i)) {
+ DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__);
+ continue;
+ }
+ }
+}
+
+void store_xmsi_data(nic_t *nic)
+{
+ XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
+ u64 val64, addr, data;
+ int i;
+
+ /* Store and display */
+ for (i=0; i< MAX_REQUESTED_MSI_X; i++) {
+ val64 = (BIT(15) | vBIT(i, 26, 6));
+ writeq(val64, &bar0->xmsi_access);
+ if (wait_for_msix_trans(nic, i)) {
+ DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__);
+ continue;
+ }
+ addr = readq(&bar0->xmsi_address);
+ data = readq(&bar0->xmsi_data);
+ if (addr && data) {
+ nic->msix_info[i].addr = addr;
+ nic->msix_info[i].data = data;
+ }
+ }
+}
+
+int s2io_enable_msi(nic_t *nic)
+{
+ XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
+ u16 msi_ctrl, msg_val;
+ struct config_param *config = &nic->config;
+ struct net_device *dev = nic->dev;
+ u64 val64, tx_mat, rx_mat;
+ int i, err;
+
+ val64 = readq(&bar0->pic_control);
+ val64 &= ~BIT(1);
+ writeq(val64, &bar0->pic_control);
+
+ err = pci_enable_msi(nic->pdev);
+ if (err) {
+ DBG_PRINT(ERR_DBG, "%s: enabling MSI failed\n",
+ nic->dev->name);
+ return err;
+ }
+
+ /*
+ * Enable MSI and use MSI-1 in stead of the standard MSI-0
+ * for interrupt handling.
+ */
+ pci_read_config_word(nic->pdev, 0x4c, &msg_val);
+ msg_val ^= 0x1;
+ pci_write_config_word(nic->pdev, 0x4c, msg_val);
+ pci_read_config_word(nic->pdev, 0x4c, &msg_val);
+
+ pci_read_config_word(nic->pdev, 0x42, &msi_ctrl);
+ msi_ctrl |= 0x10;
+ pci_write_config_word(nic->pdev, 0x42, msi_ctrl);
+
+ /* program MSI-1 into all usable Tx_Mat and Rx_Mat fields */
+ tx_mat = readq(&bar0->tx_mat0_n[0]);
+ for (i=0; i<config->tx_fifo_num; i++) {
+ tx_mat |= TX_MAT_SET(i, 1);
+ }
+ writeq(tx_mat, &bar0->tx_mat0_n[0]);
+
+ rx_mat = readq(&bar0->rx_mat);
+ for (i=0; i<config->rx_ring_num; i++) {
+ rx_mat |= RX_MAT_SET(i, 1);
+ }
+ writeq(rx_mat, &bar0->rx_mat);
+
+ dev->irq = nic->pdev->irq;
+ return 0;
+}
+
+int s2io_enable_msi_x(nic_t *nic)
+{
+ XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
+ u64 tx_mat, rx_mat;
+ u16 msi_control; /* Temp variable */
+ int ret, i, j, msix_indx = 1;
+
+ nic->entries = kmalloc(MAX_REQUESTED_MSI_X * sizeof(struct msix_entry),
+ GFP_KERNEL);
+ if (nic->entries == NULL) {
+ DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n", __FUNCTION__);
+ return -ENOMEM;
+ }
+ memset(nic->entries, 0, MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
+
+ nic->s2io_entries =
+ kmalloc(MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry),
+ GFP_KERNEL);
+ if (nic->s2io_entries == NULL) {
+ DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n", __FUNCTION__);
+ kfree(nic->entries);
+ return -ENOMEM;
+ }
+ memset(nic->s2io_entries, 0,
+ MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry));
+
+ for (i=0; i< MAX_REQUESTED_MSI_X; i++) {
+ nic->entries[i].entry = i;
+ nic->s2io_entries[i].entry = i;
+ nic->s2io_entries[i].arg = NULL;
+ nic->s2io_entries[i].in_use = 0;
+ }
+
+ tx_mat = readq(&bar0->tx_mat0_n[0]);
+ for (i=0; i<nic->config.tx_fifo_num; i++, msix_indx++) {
+ tx_mat |= TX_MAT_SET(i, msix_indx);
+ nic->s2io_entries[msix_indx].arg = &nic->mac_control.fifos[i];
+ nic->s2io_entries[msix_indx].type = MSIX_FIFO_TYPE;
+ nic->s2io_entries[msix_indx].in_use = MSIX_FLG;
+ }
+ writeq(tx_mat, &bar0->tx_mat0_n[0]);
+
+ if (!nic->config.bimodal) {
+ rx_mat = readq(&bar0->rx_mat);
+ for (j=0; j<nic->config.rx_ring_num; j++, msix_indx++) {
+ rx_mat |= RX_MAT_SET(j, msix_indx);
+ nic->s2io_entries[msix_indx].arg = &nic->mac_control.rings[j];
+ nic->s2io_entries[msix_indx].type = MSIX_RING_TYPE;
+ nic->s2io_entries[msix_indx].in_use = MSIX_FLG;
+ }
+ writeq(rx_mat, &bar0->rx_mat);
+ } else {
+ tx_mat = readq(&bar0->tx_mat0_n[7]);
+ for (j=0; j<nic->config.rx_ring_num; j++, msix_indx++) {
+ tx_mat |= TX_MAT_SET(i, msix_indx);
+ nic->s2io_entries[msix_indx].arg = &nic->mac_control.rings[j];
+ nic->s2io_entries[msix_indx].type = MSIX_RING_TYPE;
+ nic->s2io_entries[msix_indx].in_use = MSIX_FLG;
+ }
+ writeq(tx_mat, &bar0->tx_mat0_n[7]);
+ }
+
+ ret = pci_enable_msix(nic->pdev, nic->entries, MAX_REQUESTED_MSI_X);
+ if (ret) {
+ DBG_PRINT(ERR_DBG, "%s: Enabling MSIX failed\n", nic->dev->name);
+ kfree(nic->entries);
+ kfree(nic->s2io_entries);
+ nic->entries = NULL;
+ nic->s2io_entries = NULL;
+ return -ENOMEM;
+ }
+
+ /*
+ * To enable MSI-X, MSI also needs to be enabled, due to a bug
+ * in the herc NIC. (Temp change, needs to be removed later)
+ */
+ pci_read_config_word(nic->pdev, 0x42, &msi_control);
+ msi_control |= 0x1; /* Enable MSI */
+ pci_write_config_word(nic->pdev, 0x42, msi_control);
+
+ return 0;
+}
+
/* ********************************************************* *
* Functions defined below concern the OS part of the driver *
* ********************************************************* */
@@ -3048,6 +3256,8 @@
{
nic_t *sp = dev->priv;
int err = 0;
+ int i;
+ u16 msi_control; /* Temp variable */
/*
* Make sure you have link off by default every time
@@ -3064,13 +3274,55 @@
goto hw_init_failed;
}
+ /* Store the values of the MSIX table in the nic_t structure */
+ store_xmsi_data(sp);
+
/* After proper initialization of H/W, register ISR */
- err = request_irq((int) sp->pdev->irq, s2io_isr, SA_SHIRQ,
- sp->name, dev);
- if (err) {
- DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",
- dev->name);
- goto isr_registration_failed;
+ if (sp->intr_type == MSI) {
+ err = request_irq((int) sp->pdev->irq, s2io_msi_handle,
+ SA_SHIRQ, sp->name, dev);
+ if (err) {
+ DBG_PRINT(ERR_DBG, "%s: MSI registration \
+failed\n", dev->name);
+ goto isr_registration_failed;
+ }
+ }
+ if (sp->intr_type == MSI_X) {
+ for (i=1; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) {
+ if (sp->s2io_entries[i].type == MSIX_FIFO_TYPE) {
+ sprintf(sp->desc1, "%s:MSI-X-%d-TX",
+ dev->name, i);
+ err = request_irq(sp->entries[i].vector,
+ s2io_msix_fifo_handle, 0, sp->desc1,
+ sp->s2io_entries[i].arg);
+ DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc1,
+ sp->msix_info[i].addr);
+ } else {
+ sprintf(sp->desc2, "%s:MSI-X-%d-RX",
+ dev->name, i);
+ err = request_irq(sp->entries[i].vector,
+ s2io_msix_ring_handle, 0, sp->desc2,
+ sp->s2io_entries[i].arg);
+ DBG_PRINT(ERR_DBG, "%s @ 0x%llx\n", sp->desc2,
+ sp->msix_info[i].addr);
+ }
+ if (err) {
+ DBG_PRINT(ERR_DBG, "%s: MSI-X-%d registration \
+failed\n", dev->name, i);
+ DBG_PRINT(ERR_DBG, "Returned: %d\n", err);
+ goto isr_registration_failed;
+ }
+ sp->s2io_entries[i].in_use = MSIX_REGISTERED_SUCCESS;
+ }
+ }
+ if (sp->intr_type == INTA) {
+ err = request_irq((int) sp->pdev->irq, s2io_isr, SA_SHIRQ,
+ sp->name, dev);
+ if (err) {
+ DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",
+ dev->name);
+ goto isr_registration_failed;
+ }
}
if (s2io_set_mac_addr(dev, dev->dev_addr) == FAILURE) {
@@ -3083,11 +3335,37 @@
return 0;
setting_mac_address_failed:
- free_irq(sp->pdev->irq, dev);
+ if (sp->intr_type != MSI_X)
+ free_irq(sp->pdev->irq, dev);
isr_registration_failed:
del_timer_sync(&sp->alarm_timer);
+ if (sp->intr_type == MSI_X) {
+ if (sp->device_type == XFRAME_II_DEVICE) {
+ for (i=1; (sp->s2io_entries[i].in_use ==
+ MSIX_REGISTERED_SUCCESS); i++) {
+ int vector = sp->entries[i].vector;
+ void *arg = sp->s2io_entries[i].arg;
+
+ free_irq(vector, arg);
+ }
+ pci_disable_msix(sp->pdev);
+
+ /* Temp */
+ pci_read_config_word(sp->pdev, 0x42, &msi_control);
+ msi_control &= 0xFFFE; /* Disable MSI */
+ pci_write_config_word(sp->pdev, 0x42, msi_control);
+ }
+ }
+ else if (sp->intr_type == MSI)
+ pci_disable_msi(sp->pdev);
s2io_reset(sp);
hw_init_failed:
+ if (sp->intr_type == MSI_X) {
+ if (sp->entries)
+ kfree(sp->entries);
+ if (sp->s2io_entries)
+ kfree(sp->s2io_entries);
+ }
return err;
}
@@ -3107,12 +3385,35 @@
int s2io_close(struct net_device *dev)
{
nic_t *sp = dev->priv;
+ int i;
+ u16 msi_control;
+
flush_scheduled_work();
netif_stop_queue(dev);
/* Reset card, kill tasklet and free Tx and Rx buffers. */
s2io_card_down(sp);
- free_irq(sp->pdev->irq, dev);
+ if (sp->intr_type == MSI_X) {
+ if (sp->device_type == XFRAME_II_DEVICE) {
+ for (i=1; (sp->s2io_entries[i].in_use ==
+ MSIX_REGISTERED_SUCCESS); i++) {
+ int vector = sp->entries[i].vector;
+ void *arg = sp->s2io_entries[i].arg;
+
+ free_irq(vector, arg);
+ }
+ pci_read_config_word(sp->pdev, 0x42, &msi_control);
+ msi_control &= 0xFFFE; /* Disable MSI */
+ pci_write_config_word(sp->pdev, 0x42, msi_control);
+
+ pci_disable_msix(sp->pdev);
+ }
+ }
+ else {
+ free_irq(sp->pdev->irq, dev);
+ if (sp->intr_type == MSI)
+ pci_disable_msi(sp->pdev);
+ }
sp->device_close_flag = TRUE; /* Device is shut down. */
return 0;
}
@@ -3278,6 +3579,104 @@
mod_timer(&sp->alarm_timer, jiffies + HZ / 2);
}
+static irqreturn_t
+s2io_msi_handle(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = (struct net_device *) dev_id;
+ nic_t *sp = dev->priv;
+ int i;
+ int ret;
+ mac_info_t *mac_control;
+ struct config_param *config;
+
+ atomic_inc(&sp->isr_cnt);
+ mac_control = &sp->mac_control;
+ config = &sp->config;
+ DBG_PRINT(INTR_DBG, "%s: MSI handler\n", __FUNCTION__);
+
+ /* If Intr is because of Rx Traffic */
+ for (i = 0; i < config->rx_ring_num; i++)
+ rx_intr_handler(&mac_control->rings[i]);
+
+ /* If Intr is because of Tx Traffic */
+ for (i = 0; i < config->tx_fifo_num; i++)
+ tx_intr_handler(&mac_control->fifos[i]);
+
+ /*
+ * If the Rx buffer count is below the panic threshold then
+ * reallocate the buffers from the interrupt handler itself,
+ * else schedule a tasklet to reallocate the buffers.
+ */
+ for (i = 0; i < config->rx_ring_num; i++) {
+ int rxb_size = atomic_read(&sp->rx_bufs_left[i]);
+ int level = rx_buffer_level(sp, rxb_size, i);
+
+ if ((level == PANIC) && (!TASKLET_IN_USE)) {
+ DBG_PRINT(INTR_DBG, "%s: Rx BD hit ", dev->name);
+ DBG_PRINT(INTR_DBG, "PANIC levels\n");
+ if ((ret = fill_rx_buffers(sp, i)) == -ENOMEM) {
+ DBG_PRINT(ERR_DBG, "%s:Out of memory",
+ dev->name);
+ DBG_PRINT(ERR_DBG, " in ISR!!\n");
+ clear_bit(0, (&sp->tasklet_status));
+ atomic_dec(&sp->isr_cnt);
+ return IRQ_HANDLED;
+ }
+ clear_bit(0, (&sp->tasklet_status));
+ } else if (level == LOW) {
+ tasklet_schedule(&sp->task);
+ }
+ }
+
+ atomic_dec(&sp->isr_cnt);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t
+s2io_msix_ring_handle(int irq, void *dev_id, struct pt_regs *regs)
+{
+ ring_info_t *ring = (ring_info_t *)dev_id;
+ nic_t *sp = ring->nic;
+ int rxb_size, level, rng_n;
+
+ atomic_inc(&sp->isr_cnt);
+ rx_intr_handler(ring);
+
+ rng_n = ring->ring_no;
+ rxb_size = atomic_read(&sp->rx_bufs_left[rng_n]);
+ level = rx_buffer_level(sp, rxb_size, rng_n);
+
+ if ((level == PANIC) && (!TASKLET_IN_USE)) {
+ int ret;
+ DBG_PRINT(INTR_DBG, "%s: Rx BD hit ", __FUNCTION__);
+ DBG_PRINT(INTR_DBG, "PANIC levels\n");
+ if ((ret = fill_rx_buffers(sp, rng_n)) == -ENOMEM) {
+ DBG_PRINT(ERR_DBG, "Out of memory in %s",
+ __FUNCTION__);
+ clear_bit(0, (&sp->tasklet_status));
+ return IRQ_HANDLED;
+ }
+ clear_bit(0, (&sp->tasklet_status));
+ } else if (level == LOW) {
+ tasklet_schedule(&sp->task);
+ }
+ atomic_dec(&sp->isr_cnt);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t
+s2io_msix_fifo_handle(int irq, void *dev_id, struct pt_regs *regs)
+{
+ fifo_info_t *fifo = (fifo_info_t *)dev_id;
+ nic_t *sp = fifo->nic;
+
+ atomic_inc(&sp->isr_cnt);
+ tx_intr_handler(fifo);
+ atomic_dec(&sp->isr_cnt);
+ return IRQ_HANDLED;
+}
+
static void s2io_txpic_intr_handle(nic_t *sp)
{
XENA_dev_config_t __iomem *bar0 = sp->bar0;
@@ -4932,7 +5331,7 @@
static int s2io_card_up(nic_t * sp)
{
- int i, ret;
+ int i, ret = 0;
mac_info_t *mac_control;
struct config_param *config;
struct net_device *dev = (struct net_device *) sp->dev;
@@ -4944,6 +5343,15 @@
return -ENODEV;
}
+ if (sp->intr_type == MSI)
+ ret = s2io_enable_msi(sp);
+ else if (sp->intr_type == MSI_X)
+ ret = s2io_enable_msi_x(sp);
+ if (ret) {
+ DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name);
+ sp->intr_type = INTA;
+ }
+
/*
* Initializing the Rx buffers. For now we are considering only 1
* Rx ring and initializing buffers into 30 Rx blocks
@@ -5245,6 +5653,7 @@
module_param(indicate_max_pkts, int, 0);
#endif
module_param(rxsync_frequency, int, 0);
+module_param(intr_type, int, 0);
/**
* s2io_init_nic - Initialization of the adapter .
@@ -5274,9 +5683,16 @@
mac_info_t *mac_control;
struct config_param *config;
int mode;
+ u8 dev_intr_type = intr_type;
#ifdef CONFIG_S2IO_NAPI
- DBG_PRINT(ERR_DBG, "NAPI support has been enabled\n");
+ if (dev_intr_type != INTA) {
+ DBG_PRINT(ERR_DBG, "NAPI cannot be enabled when MSI/MSI-X \
+is enabled. Defaulting to INTA\n");
+ dev_intr_type = INTA;
+ }
+ else
+ DBG_PRINT(ERR_DBG, "NAPI support has been enabled\n");
#endif
if ((ret = pci_enable_device(pdev))) {
@@ -5303,10 +5719,35 @@
return -ENOMEM;
}
- if (pci_request_regions(pdev, s2io_driver_name)) {
- DBG_PRINT(ERR_DBG, "Request Regions failed\n"),
- pci_disable_device(pdev);
- return -ENODEV;
+ if ((dev_intr_type == MSI_X) &&
+ ((pdev->device != PCI_DEVICE_ID_HERC_WIN) &&
+ (pdev->device != PCI_DEVICE_ID_HERC_UNI))) {
+ DBG_PRINT(ERR_DBG, "Xframe I does not support MSI_X. \
+Defaulting to INTA\n");
+ dev_intr_type = INTA;
+ }
+ if (dev_intr_type != MSI_X) {
+ if (pci_request_regions(pdev, s2io_driver_name)) {
+ DBG_PRINT(ERR_DBG, "Request Regions failed\n"),
+ pci_disable_device(pdev);
+ return -ENODEV;
+ }
+ }
+ else {
+ if (!(request_mem_region(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0), s2io_driver_name))) {
+ DBG_PRINT(ERR_DBG, "bar0 Request Regions failed\n");
+ pci_disable_device(pdev);
+ return -ENODEV;
+ }
+ if (!(request_mem_region(pci_resource_start(pdev, 2),
+ pci_resource_len(pdev, 2), s2io_driver_name))) {
+ DBG_PRINT(ERR_DBG, "bar1 Request Regions failed\n");
+ release_mem_region(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ pci_disable_device(pdev);
+ return -ENODEV;
+ }
}
dev = alloc_etherdev(sizeof(nic_t));
@@ -5329,6 +5770,7 @@
sp->pdev = pdev;
sp->high_dma_flag = dma_flag;
sp->device_enabled_once = FALSE;
+ sp->intr_type = dev_intr_type;
if ((pdev->device == PCI_DEVICE_ID_HERC_WIN) ||
(pdev->device == PCI_DEVICE_ID_HERC_UNI))
@@ -5336,6 +5778,7 @@
else
sp->device_type = XFRAME_I_DEVICE;
+
/* Initialize some PCI/PCI-X fields of the NIC. */
s2io_init_pci(sp);
@@ -5577,6 +6020,17 @@
#ifdef CONFIG_2BUFF_MODE
DBG_PRINT(ERR_DBG, ", Buffer mode %d",2);
#endif
+ switch(sp->intr_type) {
+ case INTA:
+ DBG_PRINT(ERR_DBG, ", Intr type INTA");
+ break;
+ case MSI:
+ DBG_PRINT(ERR_DBG, ", Intr type MSI");
+ break;
+ case MSI_X:
+ DBG_PRINT(ERR_DBG, ", Intr type MSI-X");
+ break;
+ }
DBG_PRINT(ERR_DBG, "\nCopyright(c) 2002-2005 Neterion Inc.\n");
DBG_PRINT(ERR_DBG, "MAC ADDR: %02x:%02x:%02x:%02x:%02x:%02x\n",
@@ -5601,6 +6055,17 @@
#ifdef CONFIG_2BUFF_MODE
DBG_PRINT(ERR_DBG, ", Buffer mode %d",2);
#endif
+ switch(sp->intr_type) {
+ case INTA:
+ DBG_PRINT(ERR_DBG, ", Intr type INTA");
+ break;
+ case MSI:
+ DBG_PRINT(ERR_DBG, ", Intr type MSI");
+ break;
+ case MSI_X:
+ DBG_PRINT(ERR_DBG, ", Intr type MSI-X");
+ break;
+ }
DBG_PRINT(ERR_DBG, "\nCopyright(c) 2002-2005 Neterion Inc.\n");
DBG_PRINT(ERR_DBG, "MAC ADDR: %02x:%02x:%02x:%02x:%02x:%02x\n",
sp->def_mac_addr[0].mac_addr[0],
@@ -5644,7 +6109,14 @@
mem_alloc_failed:
free_shared_mem(sp);
pci_disable_device(pdev);
- pci_release_regions(pdev);
+ if (dev_intr_type != MSI_X)
+ pci_release_regions(pdev);
+ else {
+ release_mem_region(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ release_mem_region(pci_resource_start(pdev, 2),
+ pci_resource_len(pdev, 2));
+ }
pci_set_drvdata(pdev, NULL);
free_netdev(dev);
@@ -5678,7 +6150,14 @@
iounmap(sp->bar0);
iounmap(sp->bar1);
pci_disable_device(pdev);
- pci_release_regions(pdev);
+ if (sp->intr_type != MSI_X)
+ pci_release_regions(pdev);
+ else {
+ release_mem_region(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ release_mem_region(pci_resource_start(pdev, 2),
+ pci_resource_len(pdev, 2));
+ }
pci_set_drvdata(pdev, NULL);
free_netdev(dev);
}
