| # SPDX-License-Identifier: GPL-2.0-only |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Samsung S3C/S5P/Exynos SoC pin controller |
| |
| maintainers: |
| - Krzysztof Kozlowski <krzk@kernel.org> |
| - Sylwester Nawrocki <s.nawrocki@samsung.com> |
| - Tomasz Figa <tomasz.figa@gmail.com> |
| |
| description: | |
| This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin |
| controller. |
| |
| All the pin controller nodes should be represented in the aliases node using |
| the following format 'pinctrl{n}' where n is a unique number for the alias. |
| |
| The controller supports three types of interrupts:: |
| - External GPIO interrupts (see interrupts property in pin controller node); |
| |
| - External wake-up interrupts - multiplexed (capable of waking up the system |
| see interrupts property in external wake-up interrupt controller node - |
| samsung,pinctrl-wakeup-interrupt.yaml); |
| |
| - External wake-up interrupts - direct (capable of waking up the system, see |
| interrupts property in every bank of pin controller with external wake-up |
| interrupt controller - samsung,pinctrl-gpio-bank.yaml). |
| |
| properties: |
| $nodename: |
| pattern: "^pinctrl(@.*)?" |
| |
| compatible: |
| enum: |
| - google,gs101-pinctrl |
| - samsung,s3c2412-pinctrl |
| - samsung,s3c2416-pinctrl |
| - samsung,s3c2440-pinctrl |
| - samsung,s3c2450-pinctrl |
| - samsung,s3c64xx-pinctrl |
| - samsung,s5pv210-pinctrl |
| - samsung,exynos3250-pinctrl |
| - samsung,exynos4210-pinctrl |
| - samsung,exynos4x12-pinctrl |
| - samsung,exynos5250-pinctrl |
| - samsung,exynos5260-pinctrl |
| - samsung,exynos5410-pinctrl |
| - samsung,exynos5420-pinctrl |
| - samsung,exynos5433-pinctrl |
| - samsung,exynos7-pinctrl |
| - samsung,exynos7885-pinctrl |
| - samsung,exynos850-pinctrl |
| - samsung,exynosautov9-pinctrl |
| - samsung,exynosautov920-pinctrl |
| - tesla,fsd-pinctrl |
| |
| interrupts: |
| description: |
| Required for GPIO banks supporting external GPIO interrupts. |
| maxItems: 1 |
| |
| power-domains: |
| maxItems: 1 |
| |
| reg: |
| description: |
| Second base address of the pin controller if the specific registers of |
| the pin controller are separated into the different base address. |
| Only certain banks of certain pin controller might need it. |
| minItems: 1 |
| maxItems: 2 |
| |
| clocks: |
| maxItems: 1 |
| |
| clock-names: |
| items: |
| - const: pclk |
| |
| wakeup-interrupt-controller: |
| $ref: samsung,pinctrl-wakeup-interrupt.yaml |
| |
| patternProperties: |
| "^[a-z]+[0-9]*-gpio-bank$": |
| description: |
| Pin banks of the controller are represented by child nodes of the |
| controller node. Bank name is taken from name of the node. |
| $ref: samsung,pinctrl-gpio-bank.yaml |
| |
| "^[a-z0-9-]+-pins$": |
| oneOf: |
| - $ref: samsung,pinctrl-pins-cfg.yaml |
| required: |
| - samsung,pins |
| - type: object |
| patternProperties: |
| "^[a-z0-9-]+-pins$": |
| $ref: samsung,pinctrl-pins-cfg.yaml |
| |
| additionalProperties: false |
| |
| "^(initial|sleep)-state$": |
| type: object |
| additionalProperties: false |
| |
| patternProperties: |
| "^(pin-[a-z0-9-]+|[a-z0-9-]+-pin)$": |
| $ref: samsung,pinctrl-pins-cfg.yaml |
| |
| properties: |
| samsung,pins: |
| description: See samsung,pinctrl-pins-cfg.yaml |
| $ref: /schemas/types.yaml#/definitions/string-array |
| maxItems: 1 |
| |
| required: |
| - samsung,pins |
| |
| unevaluatedProperties: false |
| |
| required: |
| - compatible |
| - reg |
| |
| allOf: |
| - $ref: pinctrl.yaml# |
| - if: |
| properties: |
| compatible: |
| contains: |
| const: google,gs101-pinctrl |
| then: |
| required: |
| - clocks |
| - clock-names |
| else: |
| properties: |
| clocks: false |
| clock-names: false |
| |
| - if: |
| properties: |
| compatible: |
| contains: |
| const: samsung,exynos5433-pinctrl |
| then: |
| properties: |
| reg: |
| minItems: 1 |
| maxItems: 2 |
| else: |
| properties: |
| reg: |
| minItems: 1 |
| maxItems: 1 |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| pinctrl@7f008000 { |
| compatible = "samsung,s3c64xx-pinctrl"; |
| reg = <0x7f008000 0x1000>; |
| interrupt-parent = <&vic1>; |
| interrupts = <21>; |
| |
| wakeup-interrupt-controller { |
| compatible = "samsung,s3c64xx-wakeup-eint"; |
| interrupts-extended = <&vic0 0>, |
| <&vic0 1>, |
| <&vic1 0>, |
| <&vic1 1>; |
| }; |
| |
| /* Pin bank with external GPIO or muxed external wake-up interrupts */ |
| gpa-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| // ... |
| |
| uart0-data-pins { |
| samsung,pins = "gpa-0", "gpa-1"; |
| samsung,pin-function = <2>; |
| samsung,pin-pud = <0>; |
| }; |
| |
| // ... |
| }; |
| |
| - | |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| pinctrl@11400000 { |
| compatible = "samsung,exynos4210-pinctrl"; |
| reg = <0x11400000 0x1000>; |
| interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&sleep0>; |
| |
| /* Pin bank with external GPIO or muxed external wake-up interrupts */ |
| gpa0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| // ... |
| |
| uart0-data-pins { |
| samsung,pins = "gpa0-0", "gpa0-1"; |
| samsung,pin-function = <2>; |
| samsung,pin-pud = <0>; |
| samsung,pin-drv = <0>; |
| }; |
| |
| // ... |
| |
| sleep0: sleep-state { |
| gpa0-0-pin { |
| samsung,pins = "gpa0-0"; |
| samsung,pin-con-pdn = <2>; |
| samsung,pin-pud-pdn = <0>; |
| }; |
| |
| gpa0-1-pin { |
| samsung,pins = "gpa0-1"; |
| samsung,pin-con-pdn = <0>; |
| samsung,pin-pud-pdn = <0>; |
| }; |
| |
| // ... |
| }; |
| }; |
| |
| - | |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| pinctrl@11000000 { |
| compatible = "samsung,exynos4210-pinctrl"; |
| reg = <0x11000000 0x1000>; |
| interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; |
| |
| wakeup-interrupt-controller { |
| compatible = "samsung,exynos4210-wakeup-eint"; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| /* Pin bank with external GPIO or muxed external wake-up interrupts */ |
| gpj0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| /* Pin bank without external interrupts */ |
| gpy0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| /* Pin bank with external direct wake-up interrupts */ |
| gpx0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; |
| #interrupt-cells = <2>; |
| }; |
| |
| // ... |
| |
| sd0-clk-pins { |
| samsung,pins = "gpk0-0"; |
| samsung,pin-function = <2>; |
| samsung,pin-pud = <0>; |
| samsung,pin-drv = <3>; |
| }; |
| |
| sd4-bus-width8-pins { |
| part-1-pins { |
| samsung,pins = "gpk0-3", "gpk0-4", |
| "gpk0-5", "gpk0-6"; |
| samsung,pin-function = <3>; |
| samsung,pin-pud = <3>; |
| samsung,pin-drv = <3>; |
| }; |
| |
| part-2-pins { |
| samsung,pins = "gpk1-3", "gpk1-4", |
| "gpk1-5", "gpk1-6"; |
| samsung,pin-function = <4>; |
| samsung,pin-pud = <3>; |
| samsung,pin-drv = <3>; |
| }; |
| }; |
| |
| // ... |
| |
| otg-gp-pins { |
| samsung,pins = "gpx3-3"; |
| samsung,pin-function = <1>; |
| samsung,pin-pud = <0>; |
| samsung,pin-drv = <0>; |
| samsung,pin-val = <0>; |
| }; |
| }; |
| |
| - | |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| pinctrl@10580000 { |
| compatible = "samsung,exynos5433-pinctrl"; |
| reg = <0x10580000 0x1a20>, <0x11090000 0x100>; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&initial_alive>; |
| |
| wakeup-interrupt-controller { |
| compatible = "samsung,exynos5433-wakeup-eint", |
| "samsung,exynos7-wakeup-eint"; |
| interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| /* Pin bank with external direct wake-up interrupts */ |
| gpa0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| interrupt-controller; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| #interrupt-cells = <2>; |
| }; |
| |
| // ... |
| |
| te-irq-pins { |
| samsung,pins = "gpf1-3"; |
| samsung,pin-function = <0xf>; |
| }; |
| |
| // .. |
| |
| initial_alive: initial-state { |
| gpa0-0-pin { |
| samsung,pins = "gpa0-0"; |
| samsung,pin-function = <0>; |
| samsung,pin-pud = <1>; |
| samsung,pin-drv = <0>; |
| }; |
| |
| // ... |
| }; |
| }; |
| |
| - | |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| pinctrl@114b0000 { |
| compatible = "samsung,exynos5433-pinctrl"; |
| reg = <0x114b0000 0x1000>; |
| interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&pd_aud>; |
| |
| /* Pin bank with external GPIO or muxed external wake-up interrupts */ |
| gpz0-gpio-bank { |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| // ... |
| |
| i2s0-bus-pins { |
| samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3", |
| "gpz0-4", "gpz0-5", "gpz0-6"; |
| samsung,pin-function = <2>; |
| samsung,pin-pud = <0>; |
| samsung,pin-drv = <0>; |
| }; |
| |
| // ... |
| }; |
