| // SPDX-License-Identifier: GPL-2.0-only |
| /* Copyright(c) 2022 Intel Corporation. All rights reserved. */ |
| #include <linux/device.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| |
| #include "cxlmem.h" |
| #include "cxlpci.h" |
| |
| /** |
| * DOC: cxl port |
| * |
| * The port driver enumerates dport via PCI and scans for HDM |
| * (Host-managed-Device-Memory) decoder resources via the |
| * @component_reg_phys value passed in by the agent that registered the |
| * port. All descendant ports of a CXL root port (described by platform |
| * firmware) are managed in this drivers context. Each driver instance |
| * is responsible for tearing down the driver context of immediate |
| * descendant ports. The locking for this is validated by |
| * CONFIG_PROVE_CXL_LOCKING. |
| * |
| * The primary service this driver provides is presenting APIs to other |
| * drivers to utilize the decoders, and indicating to userspace (via bind |
| * status) the connectivity of the CXL.mem protocol throughout the |
| * PCIe topology. |
| */ |
| |
| static void schedule_detach(void *cxlmd) |
| { |
| schedule_cxl_memdev_detach(cxlmd); |
| } |
| |
| static int discover_region(struct device *dev, void *root) |
| { |
| struct cxl_endpoint_decoder *cxled; |
| int rc; |
| |
| if (!is_endpoint_decoder(dev)) |
| return 0; |
| |
| cxled = to_cxl_endpoint_decoder(dev); |
| if ((cxled->cxld.flags & CXL_DECODER_F_ENABLE) == 0) |
| return 0; |
| |
| if (cxled->state != CXL_DECODER_STATE_AUTO) |
| return 0; |
| |
| /* |
| * Region enumeration is opportunistic, if this add-event fails, |
| * continue to the next endpoint decoder. |
| */ |
| rc = cxl_add_to_region(root, cxled); |
| if (rc) |
| dev_dbg(dev, "failed to add to region: %#llx-%#llx\n", |
| cxled->cxld.hpa_range.start, cxled->cxld.hpa_range.end); |
| |
| return 0; |
| } |
| |
| static int cxl_switch_port_probe(struct cxl_port *port) |
| { |
| struct cxl_hdm *cxlhdm; |
| int rc; |
| |
| /* Cache the data early to ensure is_visible() works */ |
| read_cdat_data(port); |
| |
| rc = devm_cxl_port_enumerate_dports(port); |
| if (rc < 0) |
| return rc; |
| |
| cxl_switch_parse_cdat(port); |
| |
| cxlhdm = devm_cxl_setup_hdm(port, NULL); |
| if (!IS_ERR(cxlhdm)) |
| return devm_cxl_enumerate_decoders(cxlhdm, NULL); |
| |
| if (PTR_ERR(cxlhdm) != -ENODEV) { |
| dev_err(&port->dev, "Failed to map HDM decoder capability\n"); |
| return PTR_ERR(cxlhdm); |
| } |
| |
| if (rc == 1) { |
| dev_dbg(&port->dev, "Fallback to passthrough decoder\n"); |
| return devm_cxl_add_passthrough_decoder(port); |
| } |
| |
| dev_err(&port->dev, "HDM decoder capability not found\n"); |
| return -ENXIO; |
| } |
| |
| static int cxl_endpoint_port_probe(struct cxl_port *port) |
| { |
| struct cxl_endpoint_dvsec_info info = { .port = port }; |
| struct cxl_memdev *cxlmd = to_cxl_memdev(port->uport_dev); |
| struct cxl_dev_state *cxlds = cxlmd->cxlds; |
| struct cxl_hdm *cxlhdm; |
| struct cxl_port *root; |
| int rc; |
| |
| rc = cxl_dvsec_rr_decode(cxlds->dev, port, &info); |
| if (rc < 0) |
| return rc; |
| |
| cxlhdm = devm_cxl_setup_hdm(port, &info); |
| if (IS_ERR(cxlhdm)) { |
| if (PTR_ERR(cxlhdm) == -ENODEV) |
| dev_err(&port->dev, "HDM decoder registers not found\n"); |
| return PTR_ERR(cxlhdm); |
| } |
| |
| /* Cache the data early to ensure is_visible() works */ |
| read_cdat_data(port); |
| cxl_endpoint_parse_cdat(port); |
| |
| get_device(&cxlmd->dev); |
| rc = devm_add_action_or_reset(&port->dev, schedule_detach, cxlmd); |
| if (rc) |
| return rc; |
| |
| rc = cxl_hdm_decode_init(cxlds, cxlhdm, &info); |
| if (rc) |
| return rc; |
| |
| rc = devm_cxl_enumerate_decoders(cxlhdm, &info); |
| if (rc) |
| return rc; |
| |
| /* |
| * This can't fail in practice as CXL root exit unregisters all |
| * descendant ports and that in turn synchronizes with cxl_port_probe() |
| */ |
| struct cxl_root *cxl_root __free(put_cxl_root) = find_cxl_root(port); |
| |
| root = &cxl_root->port; |
| |
| /* |
| * Now that all endpoint decoders are successfully enumerated, try to |
| * assemble regions from committed decoders |
| */ |
| device_for_each_child(&port->dev, root, discover_region); |
| |
| return 0; |
| } |
| |
| static int cxl_port_probe(struct device *dev) |
| { |
| struct cxl_port *port = to_cxl_port(dev); |
| |
| if (is_cxl_endpoint(port)) |
| return cxl_endpoint_port_probe(port); |
| return cxl_switch_port_probe(port); |
| } |
| |
| static ssize_t CDAT_read(struct file *filp, struct kobject *kobj, |
| struct bin_attribute *bin_attr, char *buf, |
| loff_t offset, size_t count) |
| { |
| struct device *dev = kobj_to_dev(kobj); |
| struct cxl_port *port = to_cxl_port(dev); |
| |
| if (!port->cdat_available) |
| return -ENXIO; |
| |
| if (!port->cdat.table) |
| return 0; |
| |
| return memory_read_from_buffer(buf, count, &offset, |
| port->cdat.table, |
| port->cdat.length); |
| } |
| |
| static BIN_ATTR_ADMIN_RO(CDAT, 0); |
| |
| static umode_t cxl_port_bin_attr_is_visible(struct kobject *kobj, |
| struct bin_attribute *attr, int i) |
| { |
| struct device *dev = kobj_to_dev(kobj); |
| struct cxl_port *port = to_cxl_port(dev); |
| |
| if ((attr == &bin_attr_CDAT) && port->cdat_available) |
| return attr->attr.mode; |
| |
| return 0; |
| } |
| |
| static struct bin_attribute *cxl_cdat_bin_attributes[] = { |
| &bin_attr_CDAT, |
| NULL, |
| }; |
| |
| static struct attribute_group cxl_cdat_attribute_group = { |
| .bin_attrs = cxl_cdat_bin_attributes, |
| .is_bin_visible = cxl_port_bin_attr_is_visible, |
| }; |
| |
| static const struct attribute_group *cxl_port_attribute_groups[] = { |
| &cxl_cdat_attribute_group, |
| NULL, |
| }; |
| |
| static struct cxl_driver cxl_port_driver = { |
| .name = "cxl_port", |
| .probe = cxl_port_probe, |
| .id = CXL_DEVICE_PORT, |
| .drv = { |
| .dev_groups = cxl_port_attribute_groups, |
| }, |
| }; |
| |
| static int __init cxl_port_init(void) |
| { |
| return cxl_driver_register(&cxl_port_driver); |
| } |
| /* |
| * Be ready to immediately enable ports emitted by the platform CXL root |
| * (e.g. cxl_acpi) when CONFIG_CXL_PORT=y. |
| */ |
| subsys_initcall(cxl_port_init); |
| |
| static void __exit cxl_port_exit(void) |
| { |
| cxl_driver_unregister(&cxl_port_driver); |
| } |
| module_exit(cxl_port_exit); |
| |
| MODULE_DESCRIPTION("CXL: Port enumeration and services"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_IMPORT_NS(CXL); |
| MODULE_ALIAS_CXL(CXL_DEVICE_PORT); |