| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Intel IXP4xx Ethernet driver for Linux |
| * |
| * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl> |
| * |
| * Ethernet port config (0x00 is not present on IXP42X): |
| * |
| * logical port 0x00 0x10 0x20 |
| * NPE 0 (NPE-A) 1 (NPE-B) 2 (NPE-C) |
| * physical PortId 2 0 1 |
| * TX queue 23 24 25 |
| * RX-free queue 26 27 28 |
| * TX-done queue is always 31, per-port RX and TX-ready queues are configurable |
| * |
| * Queue entries: |
| * bits 0 -> 1 - NPE ID (RX and TX-done) |
| * bits 0 -> 2 - priority (TX, per 802.1D) |
| * bits 3 -> 4 - port ID (user-set?) |
| * bits 5 -> 31 - physical descriptor address |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/dmapool.h> |
| #include <linux/etherdevice.h> |
| #include <linux/if_vlan.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/net_tstamp.h> |
| #include <linux/of.h> |
| #include <linux/of_mdio.h> |
| #include <linux/of_net.h> |
| #include <linux/phy.h> |
| #include <linux/platform_device.h> |
| #include <linux/ptp_classify.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/soc/ixp4xx/npe.h> |
| #include <linux/soc/ixp4xx/qmgr.h> |
| #include <linux/soc/ixp4xx/cpu.h> |
| #include <linux/types.h> |
| |
| #define IXP4XX_ETH_NPEA 0x00 |
| #define IXP4XX_ETH_NPEB 0x10 |
| #define IXP4XX_ETH_NPEC 0x20 |
| |
| #include "ixp46x_ts.h" |
| |
| #define DEBUG_DESC 0 |
| #define DEBUG_RX 0 |
| #define DEBUG_TX 0 |
| #define DEBUG_PKT_BYTES 0 |
| #define DEBUG_MDIO 0 |
| #define DEBUG_CLOSE 0 |
| |
| #define DRV_NAME "ixp4xx_eth" |
| |
| #define MAX_NPES 3 |
| |
| #define RX_DESCS 64 /* also length of all RX queues */ |
| #define TX_DESCS 16 /* also length of all TX queues */ |
| #define TXDONE_QUEUE_LEN 64 /* dwords */ |
| |
| #define POOL_ALLOC_SIZE (sizeof(struct desc) * (RX_DESCS + TX_DESCS)) |
| #define REGS_SIZE 0x1000 |
| |
| /* MRU is said to be 14320 in a code dump, the SW manual says that |
| * MRU/MTU is 16320 and includes VLAN and ethernet headers. |
| * See "IXP400 Software Programmer's Guide" section 10.3.2, page 161. |
| * |
| * FIXME: we have chosen the safe default (14320) but if you can test |
| * jumboframes, experiment with 16320 and see what happens! |
| */ |
| #define MAX_MRU (14320 - VLAN_ETH_HLEN) |
| #define RX_BUFF_SIZE ALIGN((NET_IP_ALIGN) + MAX_MRU, 4) |
| |
| #define NAPI_WEIGHT 16 |
| #define MDIO_INTERVAL (3 * HZ) |
| #define MAX_MDIO_RETRIES 100 /* microseconds, typically 30 cycles */ |
| #define MAX_CLOSE_WAIT 1000 /* microseconds, typically 2-3 cycles */ |
| |
| #define NPE_ID(port_id) ((port_id) >> 4) |
| #define PHYSICAL_ID(port_id) ((NPE_ID(port_id) + 2) % 3) |
| #define TX_QUEUE(port_id) (NPE_ID(port_id) + 23) |
| #define RXFREE_QUEUE(port_id) (NPE_ID(port_id) + 26) |
| #define TXDONE_QUEUE 31 |
| |
| #define PTP_SLAVE_MODE 1 |
| #define PTP_MASTER_MODE 2 |
| #define PORT2CHANNEL(p) NPE_ID(p->id) |
| |
| /* TX Control Registers */ |
| #define TX_CNTRL0_TX_EN 0x01 |
| #define TX_CNTRL0_HALFDUPLEX 0x02 |
| #define TX_CNTRL0_RETRY 0x04 |
| #define TX_CNTRL0_PAD_EN 0x08 |
| #define TX_CNTRL0_APPEND_FCS 0x10 |
| #define TX_CNTRL0_2DEFER 0x20 |
| #define TX_CNTRL0_RMII 0x40 /* reduced MII */ |
| #define TX_CNTRL1_RETRIES 0x0F /* 4 bits */ |
| |
| /* RX Control Registers */ |
| #define RX_CNTRL0_RX_EN 0x01 |
| #define RX_CNTRL0_PADSTRIP_EN 0x02 |
| #define RX_CNTRL0_SEND_FCS 0x04 |
| #define RX_CNTRL0_PAUSE_EN 0x08 |
| #define RX_CNTRL0_LOOP_EN 0x10 |
| #define RX_CNTRL0_ADDR_FLTR_EN 0x20 |
| #define RX_CNTRL0_RX_RUNT_EN 0x40 |
| #define RX_CNTRL0_BCAST_DIS 0x80 |
| #define RX_CNTRL1_DEFER_EN 0x01 |
| |
| /* Core Control Register */ |
| #define CORE_RESET 0x01 |
| #define CORE_RX_FIFO_FLUSH 0x02 |
| #define CORE_TX_FIFO_FLUSH 0x04 |
| #define CORE_SEND_JAM 0x08 |
| #define CORE_MDC_EN 0x10 /* MDIO using NPE-B ETH-0 only */ |
| |
| #define DEFAULT_TX_CNTRL0 (TX_CNTRL0_TX_EN | TX_CNTRL0_RETRY | \ |
| TX_CNTRL0_PAD_EN | TX_CNTRL0_APPEND_FCS | \ |
| TX_CNTRL0_2DEFER) |
| #define DEFAULT_RX_CNTRL0 RX_CNTRL0_RX_EN |
| #define DEFAULT_CORE_CNTRL CORE_MDC_EN |
| |
| |
| /* NPE message codes */ |
| #define NPE_GETSTATUS 0x00 |
| #define NPE_EDB_SETPORTADDRESS 0x01 |
| #define NPE_EDB_GETMACADDRESSDATABASE 0x02 |
| #define NPE_EDB_SETMACADDRESSSDATABASE 0x03 |
| #define NPE_GETSTATS 0x04 |
| #define NPE_RESETSTATS 0x05 |
| #define NPE_SETMAXFRAMELENGTHS 0x06 |
| #define NPE_VLAN_SETRXTAGMODE 0x07 |
| #define NPE_VLAN_SETDEFAULTRXVID 0x08 |
| #define NPE_VLAN_SETPORTVLANTABLEENTRY 0x09 |
| #define NPE_VLAN_SETPORTVLANTABLERANGE 0x0A |
| #define NPE_VLAN_SETRXQOSENTRY 0x0B |
| #define NPE_VLAN_SETPORTIDEXTRACTIONMODE 0x0C |
| #define NPE_STP_SETBLOCKINGSTATE 0x0D |
| #define NPE_FW_SETFIREWALLMODE 0x0E |
| #define NPE_PC_SETFRAMECONTROLDURATIONID 0x0F |
| #define NPE_PC_SETAPMACTABLE 0x11 |
| #define NPE_SETLOOPBACK_MODE 0x12 |
| #define NPE_PC_SETBSSIDTABLE 0x13 |
| #define NPE_ADDRESS_FILTER_CONFIG 0x14 |
| #define NPE_APPENDFCSCONFIG 0x15 |
| #define NPE_NOTIFY_MAC_RECOVERY_DONE 0x16 |
| #define NPE_MAC_RECOVERY_START 0x17 |
| |
| |
| #ifdef __ARMEB__ |
| typedef struct sk_buff buffer_t; |
| #define free_buffer dev_kfree_skb |
| #define free_buffer_irq dev_consume_skb_irq |
| #else |
| typedef void buffer_t; |
| #define free_buffer kfree |
| #define free_buffer_irq kfree |
| #endif |
| |
| /* Information about built-in Ethernet MAC interfaces */ |
| struct eth_plat_info { |
| u8 rxq; /* configurable, currently 0 - 31 only */ |
| u8 txreadyq; |
| u8 hwaddr[ETH_ALEN]; |
| u8 npe; /* NPE instance used by this interface */ |
| bool has_mdio; /* If this instance has an MDIO bus */ |
| }; |
| |
| struct eth_regs { |
| u32 tx_control[2], __res1[2]; /* 000 */ |
| u32 rx_control[2], __res2[2]; /* 010 */ |
| u32 random_seed, __res3[3]; /* 020 */ |
| u32 partial_empty_threshold, __res4; /* 030 */ |
| u32 partial_full_threshold, __res5; /* 038 */ |
| u32 tx_start_bytes, __res6[3]; /* 040 */ |
| u32 tx_deferral, rx_deferral, __res7[2];/* 050 */ |
| u32 tx_2part_deferral[2], __res8[2]; /* 060 */ |
| u32 slot_time, __res9[3]; /* 070 */ |
| u32 mdio_command[4]; /* 080 */ |
| u32 mdio_status[4]; /* 090 */ |
| u32 mcast_mask[6], __res10[2]; /* 0A0 */ |
| u32 mcast_addr[6], __res11[2]; /* 0C0 */ |
| u32 int_clock_threshold, __res12[3]; /* 0E0 */ |
| u32 hw_addr[6], __res13[61]; /* 0F0 */ |
| u32 core_control; /* 1FC */ |
| }; |
| |
| struct port { |
| struct eth_regs __iomem *regs; |
| struct ixp46x_ts_regs __iomem *timesync_regs; |
| int phc_index; |
| struct npe *npe; |
| struct net_device *netdev; |
| struct napi_struct napi; |
| struct eth_plat_info *plat; |
| buffer_t *rx_buff_tab[RX_DESCS], *tx_buff_tab[TX_DESCS]; |
| struct desc *desc_tab; /* coherent */ |
| dma_addr_t desc_tab_phys; |
| int id; /* logical port ID */ |
| int speed, duplex; |
| u8 firmware[4]; |
| int hwts_tx_en; |
| int hwts_rx_en; |
| }; |
| |
| /* NPE message structure */ |
| struct msg { |
| #ifdef __ARMEB__ |
| u8 cmd, eth_id, byte2, byte3; |
| u8 byte4, byte5, byte6, byte7; |
| #else |
| u8 byte3, byte2, eth_id, cmd; |
| u8 byte7, byte6, byte5, byte4; |
| #endif |
| }; |
| |
| /* Ethernet packet descriptor */ |
| struct desc { |
| u32 next; /* pointer to next buffer, unused */ |
| |
| #ifdef __ARMEB__ |
| u16 buf_len; /* buffer length */ |
| u16 pkt_len; /* packet length */ |
| u32 data; /* pointer to data buffer in RAM */ |
| u8 dest_id; |
| u8 src_id; |
| u16 flags; |
| u8 qos; |
| u8 padlen; |
| u16 vlan_tci; |
| #else |
| u16 pkt_len; /* packet length */ |
| u16 buf_len; /* buffer length */ |
| u32 data; /* pointer to data buffer in RAM */ |
| u16 flags; |
| u8 src_id; |
| u8 dest_id; |
| u16 vlan_tci; |
| u8 padlen; |
| u8 qos; |
| #endif |
| |
| #ifdef __ARMEB__ |
| u8 dst_mac_0, dst_mac_1, dst_mac_2, dst_mac_3; |
| u8 dst_mac_4, dst_mac_5, src_mac_0, src_mac_1; |
| u8 src_mac_2, src_mac_3, src_mac_4, src_mac_5; |
| #else |
| u8 dst_mac_3, dst_mac_2, dst_mac_1, dst_mac_0; |
| u8 src_mac_1, src_mac_0, dst_mac_5, dst_mac_4; |
| u8 src_mac_5, src_mac_4, src_mac_3, src_mac_2; |
| #endif |
| }; |
| |
| |
| #define rx_desc_phys(port, n) ((port)->desc_tab_phys + \ |
| (n) * sizeof(struct desc)) |
| #define rx_desc_ptr(port, n) (&(port)->desc_tab[n]) |
| |
| #define tx_desc_phys(port, n) ((port)->desc_tab_phys + \ |
| ((n) + RX_DESCS) * sizeof(struct desc)) |
| #define tx_desc_ptr(port, n) (&(port)->desc_tab[(n) + RX_DESCS]) |
| |
| #ifndef __ARMEB__ |
| static inline void memcpy_swab32(u32 *dest, u32 *src, int cnt) |
| { |
| int i; |
| for (i = 0; i < cnt; i++) |
| dest[i] = swab32(src[i]); |
| } |
| #endif |
| |
| static DEFINE_SPINLOCK(mdio_lock); |
| static struct eth_regs __iomem *mdio_regs; /* mdio command and status only */ |
| static struct mii_bus *mdio_bus; |
| static struct device_node *mdio_bus_np; |
| static int ports_open; |
| static struct port *npe_port_tab[MAX_NPES]; |
| static struct dma_pool *dma_pool; |
| |
| static int ixp_ptp_match(struct sk_buff *skb, u16 uid_hi, u32 uid_lo, u16 seqid) |
| { |
| u8 *data = skb->data; |
| unsigned int offset; |
| u16 *hi, *id; |
| u32 lo; |
| |
| if (ptp_classify_raw(skb) != PTP_CLASS_V1_IPV4) |
| return 0; |
| |
| offset = ETH_HLEN + IPV4_HLEN(data) + UDP_HLEN; |
| |
| if (skb->len < offset + OFF_PTP_SEQUENCE_ID + sizeof(seqid)) |
| return 0; |
| |
| hi = (u16 *)(data + offset + OFF_PTP_SOURCE_UUID); |
| id = (u16 *)(data + offset + OFF_PTP_SEQUENCE_ID); |
| |
| memcpy(&lo, &hi[1], sizeof(lo)); |
| |
| return (uid_hi == ntohs(*hi) && |
| uid_lo == ntohl(lo) && |
| seqid == ntohs(*id)); |
| } |
| |
| static void ixp_rx_timestamp(struct port *port, struct sk_buff *skb) |
| { |
| struct skb_shared_hwtstamps *shhwtstamps; |
| struct ixp46x_ts_regs *regs; |
| u64 ns; |
| u32 ch, hi, lo, val; |
| u16 uid, seq; |
| |
| if (!port->hwts_rx_en) |
| return; |
| |
| ch = PORT2CHANNEL(port); |
| |
| regs = port->timesync_regs; |
| |
| val = __raw_readl(®s->channel[ch].ch_event); |
| |
| if (!(val & RX_SNAPSHOT_LOCKED)) |
| return; |
| |
| lo = __raw_readl(®s->channel[ch].src_uuid_lo); |
| hi = __raw_readl(®s->channel[ch].src_uuid_hi); |
| |
| uid = hi & 0xffff; |
| seq = (hi >> 16) & 0xffff; |
| |
| if (!ixp_ptp_match(skb, htons(uid), htonl(lo), htons(seq))) |
| goto out; |
| |
| lo = __raw_readl(®s->channel[ch].rx_snap_lo); |
| hi = __raw_readl(®s->channel[ch].rx_snap_hi); |
| ns = ((u64) hi) << 32; |
| ns |= lo; |
| ns <<= TICKS_NS_SHIFT; |
| |
| shhwtstamps = skb_hwtstamps(skb); |
| memset(shhwtstamps, 0, sizeof(*shhwtstamps)); |
| shhwtstamps->hwtstamp = ns_to_ktime(ns); |
| out: |
| __raw_writel(RX_SNAPSHOT_LOCKED, ®s->channel[ch].ch_event); |
| } |
| |
| static void ixp_tx_timestamp(struct port *port, struct sk_buff *skb) |
| { |
| struct skb_shared_hwtstamps shhwtstamps; |
| struct ixp46x_ts_regs *regs; |
| struct skb_shared_info *shtx; |
| u64 ns; |
| u32 ch, cnt, hi, lo, val; |
| |
| shtx = skb_shinfo(skb); |
| if (unlikely(shtx->tx_flags & SKBTX_HW_TSTAMP && port->hwts_tx_en)) |
| shtx->tx_flags |= SKBTX_IN_PROGRESS; |
| else |
| return; |
| |
| ch = PORT2CHANNEL(port); |
| |
| regs = port->timesync_regs; |
| |
| /* |
| * This really stinks, but we have to poll for the Tx time stamp. |
| * Usually, the time stamp is ready after 4 to 6 microseconds. |
| */ |
| for (cnt = 0; cnt < 100; cnt++) { |
| val = __raw_readl(®s->channel[ch].ch_event); |
| if (val & TX_SNAPSHOT_LOCKED) |
| break; |
| udelay(1); |
| } |
| if (!(val & TX_SNAPSHOT_LOCKED)) { |
| shtx->tx_flags &= ~SKBTX_IN_PROGRESS; |
| return; |
| } |
| |
| lo = __raw_readl(®s->channel[ch].tx_snap_lo); |
| hi = __raw_readl(®s->channel[ch].tx_snap_hi); |
| ns = ((u64) hi) << 32; |
| ns |= lo; |
| ns <<= TICKS_NS_SHIFT; |
| |
| memset(&shhwtstamps, 0, sizeof(shhwtstamps)); |
| shhwtstamps.hwtstamp = ns_to_ktime(ns); |
| skb_tstamp_tx(skb, &shhwtstamps); |
| |
| __raw_writel(TX_SNAPSHOT_LOCKED, ®s->channel[ch].ch_event); |
| } |
| |
| static int hwtstamp_set(struct net_device *netdev, struct ifreq *ifr) |
| { |
| struct hwtstamp_config cfg; |
| struct ixp46x_ts_regs *regs; |
| struct port *port = netdev_priv(netdev); |
| int ret; |
| int ch; |
| |
| if (copy_from_user(&cfg, ifr->ifr_data, sizeof(cfg))) |
| return -EFAULT; |
| |
| ret = ixp46x_ptp_find(&port->timesync_regs, &port->phc_index); |
| if (ret) |
| return ret; |
| |
| ch = PORT2CHANNEL(port); |
| regs = port->timesync_regs; |
| |
| if (cfg.tx_type != HWTSTAMP_TX_OFF && cfg.tx_type != HWTSTAMP_TX_ON) |
| return -ERANGE; |
| |
| switch (cfg.rx_filter) { |
| case HWTSTAMP_FILTER_NONE: |
| port->hwts_rx_en = 0; |
| break; |
| case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: |
| port->hwts_rx_en = PTP_SLAVE_MODE; |
| __raw_writel(0, ®s->channel[ch].ch_control); |
| break; |
| case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: |
| port->hwts_rx_en = PTP_MASTER_MODE; |
| __raw_writel(MASTER_MODE, ®s->channel[ch].ch_control); |
| break; |
| default: |
| return -ERANGE; |
| } |
| |
| port->hwts_tx_en = cfg.tx_type == HWTSTAMP_TX_ON; |
| |
| /* Clear out any old time stamps. */ |
| __raw_writel(TX_SNAPSHOT_LOCKED | RX_SNAPSHOT_LOCKED, |
| ®s->channel[ch].ch_event); |
| |
| return copy_to_user(ifr->ifr_data, &cfg, sizeof(cfg)) ? -EFAULT : 0; |
| } |
| |
| static int hwtstamp_get(struct net_device *netdev, struct ifreq *ifr) |
| { |
| struct hwtstamp_config cfg; |
| struct port *port = netdev_priv(netdev); |
| |
| cfg.flags = 0; |
| cfg.tx_type = port->hwts_tx_en ? HWTSTAMP_TX_ON : HWTSTAMP_TX_OFF; |
| |
| switch (port->hwts_rx_en) { |
| case 0: |
| cfg.rx_filter = HWTSTAMP_FILTER_NONE; |
| break; |
| case PTP_SLAVE_MODE: |
| cfg.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_SYNC; |
| break; |
| case PTP_MASTER_MODE: |
| cfg.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ; |
| break; |
| default: |
| WARN_ON_ONCE(1); |
| return -ERANGE; |
| } |
| |
| return copy_to_user(ifr->ifr_data, &cfg, sizeof(cfg)) ? -EFAULT : 0; |
| } |
| |
| static int ixp4xx_mdio_cmd(struct mii_bus *bus, int phy_id, int location, |
| int write, u16 cmd) |
| { |
| int cycles = 0; |
| |
| if (__raw_readl(&mdio_regs->mdio_command[3]) & 0x80) { |
| printk(KERN_ERR "%s: MII not ready to transmit\n", bus->name); |
| return -1; |
| } |
| |
| if (write) { |
| __raw_writel(cmd & 0xFF, &mdio_regs->mdio_command[0]); |
| __raw_writel(cmd >> 8, &mdio_regs->mdio_command[1]); |
| } |
| __raw_writel(((phy_id << 5) | location) & 0xFF, |
| &mdio_regs->mdio_command[2]); |
| __raw_writel((phy_id >> 3) | (write << 2) | 0x80 /* GO */, |
| &mdio_regs->mdio_command[3]); |
| |
| while ((cycles < MAX_MDIO_RETRIES) && |
| (__raw_readl(&mdio_regs->mdio_command[3]) & 0x80)) { |
| udelay(1); |
| cycles++; |
| } |
| |
| if (cycles == MAX_MDIO_RETRIES) { |
| printk(KERN_ERR "%s #%i: MII write failed\n", bus->name, |
| phy_id); |
| return -1; |
| } |
| |
| #if DEBUG_MDIO |
| printk(KERN_DEBUG "%s #%i: mdio_%s() took %i cycles\n", bus->name, |
| phy_id, write ? "write" : "read", cycles); |
| #endif |
| |
| if (write) |
| return 0; |
| |
| if (__raw_readl(&mdio_regs->mdio_status[3]) & 0x80) { |
| #if DEBUG_MDIO |
| printk(KERN_DEBUG "%s #%i: MII read failed\n", bus->name, |
| phy_id); |
| #endif |
| return 0xFFFF; /* don't return error */ |
| } |
| |
| return (__raw_readl(&mdio_regs->mdio_status[0]) & 0xFF) | |
| ((__raw_readl(&mdio_regs->mdio_status[1]) & 0xFF) << 8); |
| } |
| |
| static int ixp4xx_mdio_read(struct mii_bus *bus, int phy_id, int location) |
| { |
| unsigned long flags; |
| int ret; |
| |
| spin_lock_irqsave(&mdio_lock, flags); |
| ret = ixp4xx_mdio_cmd(bus, phy_id, location, 0, 0); |
| spin_unlock_irqrestore(&mdio_lock, flags); |
| #if DEBUG_MDIO |
| printk(KERN_DEBUG "%s #%i: MII read [%i] -> 0x%X\n", bus->name, |
| phy_id, location, ret); |
| #endif |
| return ret; |
| } |
| |
| static int ixp4xx_mdio_write(struct mii_bus *bus, int phy_id, int location, |
| u16 val) |
| { |
| unsigned long flags; |
| int ret; |
| |
| spin_lock_irqsave(&mdio_lock, flags); |
| ret = ixp4xx_mdio_cmd(bus, phy_id, location, 1, val); |
| spin_unlock_irqrestore(&mdio_lock, flags); |
| #if DEBUG_MDIO |
| printk(KERN_DEBUG "%s #%i: MII write [%i] <- 0x%X, err = %i\n", |
| bus->name, phy_id, location, val, ret); |
| #endif |
| return ret; |
| } |
| |
| static int ixp4xx_mdio_register(struct eth_regs __iomem *regs) |
| { |
| int err; |
| |
| if (!(mdio_bus = mdiobus_alloc())) |
| return -ENOMEM; |
| |
| mdio_regs = regs; |
| __raw_writel(DEFAULT_CORE_CNTRL, &mdio_regs->core_control); |
| mdio_bus->name = "IXP4xx MII Bus"; |
| mdio_bus->read = &ixp4xx_mdio_read; |
| mdio_bus->write = &ixp4xx_mdio_write; |
| snprintf(mdio_bus->id, MII_BUS_ID_SIZE, "ixp4xx-eth-0"); |
| |
| err = of_mdiobus_register(mdio_bus, mdio_bus_np); |
| if (err) |
| mdiobus_free(mdio_bus); |
| return err; |
| } |
| |
| static void ixp4xx_mdio_remove(void) |
| { |
| mdiobus_unregister(mdio_bus); |
| mdiobus_free(mdio_bus); |
| } |
| |
| |
| static void ixp4xx_adjust_link(struct net_device *dev) |
| { |
| struct port *port = netdev_priv(dev); |
| struct phy_device *phydev = dev->phydev; |
| |
| if (!phydev->link) { |
| if (port->speed) { |
| port->speed = 0; |
| printk(KERN_INFO "%s: link down\n", dev->name); |
| } |
| return; |
| } |
| |
| if (port->speed == phydev->speed && port->duplex == phydev->duplex) |
| return; |
| |
| port->speed = phydev->speed; |
| port->duplex = phydev->duplex; |
| |
| if (port->duplex) |
| __raw_writel(DEFAULT_TX_CNTRL0 & ~TX_CNTRL0_HALFDUPLEX, |
| &port->regs->tx_control[0]); |
| else |
| __raw_writel(DEFAULT_TX_CNTRL0 | TX_CNTRL0_HALFDUPLEX, |
| &port->regs->tx_control[0]); |
| |
| netdev_info(dev, "%s: link up, speed %u Mb/s, %s duplex\n", |
| dev->name, port->speed, port->duplex ? "full" : "half"); |
| } |
| |
| |
| static inline void debug_pkt(struct net_device *dev, const char *func, |
| u8 *data, int len) |
| { |
| #if DEBUG_PKT_BYTES |
| int i; |
| |
| netdev_debug(dev, "%s(%i) ", func, len); |
| for (i = 0; i < len; i++) { |
| if (i >= DEBUG_PKT_BYTES) |
| break; |
| printk("%s%02X", |
| ((i == 6) || (i == 12) || (i >= 14)) ? " " : "", |
| data[i]); |
| } |
| printk("\n"); |
| #endif |
| } |
| |
| |
| static inline void debug_desc(u32 phys, struct desc *desc) |
| { |
| #if DEBUG_DESC |
| printk(KERN_DEBUG "%X: %X %3X %3X %08X %2X < %2X %4X %X" |
| " %X %X %02X%02X%02X%02X%02X%02X < %02X%02X%02X%02X%02X%02X\n", |
| phys, desc->next, desc->buf_len, desc->pkt_len, |
| desc->data, desc->dest_id, desc->src_id, desc->flags, |
| desc->qos, desc->padlen, desc->vlan_tci, |
| desc->dst_mac_0, desc->dst_mac_1, desc->dst_mac_2, |
| desc->dst_mac_3, desc->dst_mac_4, desc->dst_mac_5, |
| desc->src_mac_0, desc->src_mac_1, desc->src_mac_2, |
| desc->src_mac_3, desc->src_mac_4, desc->src_mac_5); |
| #endif |
| } |
| |
| static inline int queue_get_desc(unsigned int queue, struct port *port, |
| int is_tx) |
| { |
| u32 phys, tab_phys, n_desc; |
| struct desc *tab; |
| |
| if (!(phys = qmgr_get_entry(queue))) |
| return -1; |
| |
| phys &= ~0x1F; /* mask out non-address bits */ |
| tab_phys = is_tx ? tx_desc_phys(port, 0) : rx_desc_phys(port, 0); |
| tab = is_tx ? tx_desc_ptr(port, 0) : rx_desc_ptr(port, 0); |
| n_desc = (phys - tab_phys) / sizeof(struct desc); |
| BUG_ON(n_desc >= (is_tx ? TX_DESCS : RX_DESCS)); |
| debug_desc(phys, &tab[n_desc]); |
| BUG_ON(tab[n_desc].next); |
| return n_desc; |
| } |
| |
| static inline void queue_put_desc(unsigned int queue, u32 phys, |
| struct desc *desc) |
| { |
| debug_desc(phys, desc); |
| BUG_ON(phys & 0x1F); |
| qmgr_put_entry(queue, phys); |
| /* Don't check for queue overflow here, we've allocated sufficient |
| length and queues >= 32 don't support this check anyway. */ |
| } |
| |
| |
| static inline void dma_unmap_tx(struct port *port, struct desc *desc) |
| { |
| #ifdef __ARMEB__ |
| dma_unmap_single(&port->netdev->dev, desc->data, |
| desc->buf_len, DMA_TO_DEVICE); |
| #else |
| dma_unmap_single(&port->netdev->dev, desc->data & ~3, |
| ALIGN((desc->data & 3) + desc->buf_len, 4), |
| DMA_TO_DEVICE); |
| #endif |
| } |
| |
| |
| static void eth_rx_irq(void *pdev) |
| { |
| struct net_device *dev = pdev; |
| struct port *port = netdev_priv(dev); |
| |
| #if DEBUG_RX |
| printk(KERN_DEBUG "%s: eth_rx_irq\n", dev->name); |
| #endif |
| qmgr_disable_irq(port->plat->rxq); |
| napi_schedule(&port->napi); |
| } |
| |
| static int eth_poll(struct napi_struct *napi, int budget) |
| { |
| struct port *port = container_of(napi, struct port, napi); |
| struct net_device *dev = port->netdev; |
| unsigned int rxq = port->plat->rxq, rxfreeq = RXFREE_QUEUE(port->id); |
| int received = 0; |
| |
| #if DEBUG_RX |
| netdev_debug(dev, "eth_poll\n"); |
| #endif |
| |
| while (received < budget) { |
| struct sk_buff *skb; |
| struct desc *desc; |
| int n; |
| #ifdef __ARMEB__ |
| struct sk_buff *temp; |
| u32 phys; |
| #endif |
| |
| if ((n = queue_get_desc(rxq, port, 0)) < 0) { |
| #if DEBUG_RX |
| netdev_debug(dev, "eth_poll napi_complete\n"); |
| #endif |
| napi_complete(napi); |
| qmgr_enable_irq(rxq); |
| if (!qmgr_stat_below_low_watermark(rxq) && |
| napi_schedule(napi)) { /* not empty again */ |
| #if DEBUG_RX |
| netdev_debug(dev, "eth_poll napi_schedule succeeded\n"); |
| #endif |
| qmgr_disable_irq(rxq); |
| continue; |
| } |
| #if DEBUG_RX |
| netdev_debug(dev, "eth_poll all done\n"); |
| #endif |
| return received; /* all work done */ |
| } |
| |
| desc = rx_desc_ptr(port, n); |
| |
| #ifdef __ARMEB__ |
| if ((skb = netdev_alloc_skb(dev, RX_BUFF_SIZE))) { |
| phys = dma_map_single(&dev->dev, skb->data, |
| RX_BUFF_SIZE, DMA_FROM_DEVICE); |
| if (dma_mapping_error(&dev->dev, phys)) { |
| dev_kfree_skb(skb); |
| skb = NULL; |
| } |
| } |
| #else |
| skb = netdev_alloc_skb(dev, |
| ALIGN(NET_IP_ALIGN + desc->pkt_len, 4)); |
| #endif |
| |
| if (!skb) { |
| dev->stats.rx_dropped++; |
| /* put the desc back on RX-ready queue */ |
| desc->buf_len = MAX_MRU; |
| desc->pkt_len = 0; |
| queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc); |
| continue; |
| } |
| |
| /* process received frame */ |
| #ifdef __ARMEB__ |
| temp = skb; |
| skb = port->rx_buff_tab[n]; |
| dma_unmap_single(&dev->dev, desc->data - NET_IP_ALIGN, |
| RX_BUFF_SIZE, DMA_FROM_DEVICE); |
| #else |
| dma_sync_single_for_cpu(&dev->dev, desc->data - NET_IP_ALIGN, |
| RX_BUFF_SIZE, DMA_FROM_DEVICE); |
| memcpy_swab32((u32 *)skb->data, (u32 *)port->rx_buff_tab[n], |
| ALIGN(NET_IP_ALIGN + desc->pkt_len, 4) / 4); |
| #endif |
| skb_reserve(skb, NET_IP_ALIGN); |
| skb_put(skb, desc->pkt_len); |
| |
| debug_pkt(dev, "eth_poll", skb->data, skb->len); |
| |
| ixp_rx_timestamp(port, skb); |
| skb->protocol = eth_type_trans(skb, dev); |
| dev->stats.rx_packets++; |
| dev->stats.rx_bytes += skb->len; |
| netif_receive_skb(skb); |
| |
| /* put the new buffer on RX-free queue */ |
| #ifdef __ARMEB__ |
| port->rx_buff_tab[n] = temp; |
| desc->data = phys + NET_IP_ALIGN; |
| #endif |
| desc->buf_len = MAX_MRU; |
| desc->pkt_len = 0; |
| queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc); |
| received++; |
| } |
| |
| #if DEBUG_RX |
| netdev_debug(dev, "eth_poll(): end, not all work done\n"); |
| #endif |
| return received; /* not all work done */ |
| } |
| |
| |
| static void eth_txdone_irq(void *unused) |
| { |
| u32 phys; |
| |
| #if DEBUG_TX |
| printk(KERN_DEBUG DRV_NAME ": eth_txdone_irq\n"); |
| #endif |
| while ((phys = qmgr_get_entry(TXDONE_QUEUE)) != 0) { |
| u32 npe_id, n_desc; |
| struct port *port; |
| struct desc *desc; |
| int start; |
| |
| npe_id = phys & 3; |
| BUG_ON(npe_id >= MAX_NPES); |
| port = npe_port_tab[npe_id]; |
| BUG_ON(!port); |
| phys &= ~0x1F; /* mask out non-address bits */ |
| n_desc = (phys - tx_desc_phys(port, 0)) / sizeof(struct desc); |
| BUG_ON(n_desc >= TX_DESCS); |
| desc = tx_desc_ptr(port, n_desc); |
| debug_desc(phys, desc); |
| |
| if (port->tx_buff_tab[n_desc]) { /* not the draining packet */ |
| port->netdev->stats.tx_packets++; |
| port->netdev->stats.tx_bytes += desc->pkt_len; |
| |
| dma_unmap_tx(port, desc); |
| #if DEBUG_TX |
| printk(KERN_DEBUG "%s: eth_txdone_irq free %p\n", |
| port->netdev->name, port->tx_buff_tab[n_desc]); |
| #endif |
| free_buffer_irq(port->tx_buff_tab[n_desc]); |
| port->tx_buff_tab[n_desc] = NULL; |
| } |
| |
| start = qmgr_stat_below_low_watermark(port->plat->txreadyq); |
| queue_put_desc(port->plat->txreadyq, phys, desc); |
| if (start) { /* TX-ready queue was empty */ |
| #if DEBUG_TX |
| printk(KERN_DEBUG "%s: eth_txdone_irq xmit ready\n", |
| port->netdev->name); |
| #endif |
| netif_wake_queue(port->netdev); |
| } |
| } |
| } |
| |
| static netdev_tx_t eth_xmit(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct port *port = netdev_priv(dev); |
| unsigned int txreadyq = port->plat->txreadyq; |
| int len, offset, bytes, n; |
| void *mem; |
| u32 phys; |
| struct desc *desc; |
| |
| #if DEBUG_TX |
| netdev_debug(dev, "eth_xmit\n"); |
| #endif |
| |
| if (unlikely(skb->len > MAX_MRU)) { |
| dev_kfree_skb(skb); |
| dev->stats.tx_errors++; |
| return NETDEV_TX_OK; |
| } |
| |
| debug_pkt(dev, "eth_xmit", skb->data, skb->len); |
| |
| len = skb->len; |
| #ifdef __ARMEB__ |
| offset = 0; /* no need to keep alignment */ |
| bytes = len; |
| mem = skb->data; |
| #else |
| offset = (uintptr_t)skb->data & 3; /* keep 32-bit alignment */ |
| bytes = ALIGN(offset + len, 4); |
| if (!(mem = kmalloc(bytes, GFP_ATOMIC))) { |
| dev_kfree_skb(skb); |
| dev->stats.tx_dropped++; |
| return NETDEV_TX_OK; |
| } |
| memcpy_swab32(mem, (u32 *)((uintptr_t)skb->data & ~3), bytes / 4); |
| #endif |
| |
| phys = dma_map_single(&dev->dev, mem, bytes, DMA_TO_DEVICE); |
| if (dma_mapping_error(&dev->dev, phys)) { |
| dev_kfree_skb(skb); |
| #ifndef __ARMEB__ |
| kfree(mem); |
| #endif |
| dev->stats.tx_dropped++; |
| return NETDEV_TX_OK; |
| } |
| |
| n = queue_get_desc(txreadyq, port, 1); |
| BUG_ON(n < 0); |
| desc = tx_desc_ptr(port, n); |
| |
| #ifdef __ARMEB__ |
| port->tx_buff_tab[n] = skb; |
| #else |
| port->tx_buff_tab[n] = mem; |
| #endif |
| desc->data = phys + offset; |
| desc->buf_len = desc->pkt_len = len; |
| |
| /* NPE firmware pads short frames with zeros internally */ |
| wmb(); |
| queue_put_desc(TX_QUEUE(port->id), tx_desc_phys(port, n), desc); |
| |
| if (qmgr_stat_below_low_watermark(txreadyq)) { /* empty */ |
| #if DEBUG_TX |
| netdev_debug(dev, "eth_xmit queue full\n"); |
| #endif |
| netif_stop_queue(dev); |
| /* we could miss TX ready interrupt */ |
| /* really empty in fact */ |
| if (!qmgr_stat_below_low_watermark(txreadyq)) { |
| #if DEBUG_TX |
| netdev_debug(dev, "eth_xmit ready again\n"); |
| #endif |
| netif_wake_queue(dev); |
| } |
| } |
| |
| #if DEBUG_TX |
| netdev_debug(dev, "eth_xmit end\n"); |
| #endif |
| |
| ixp_tx_timestamp(port, skb); |
| skb_tx_timestamp(skb); |
| |
| #ifndef __ARMEB__ |
| dev_kfree_skb(skb); |
| #endif |
| return NETDEV_TX_OK; |
| } |
| |
| |
| static void eth_set_mcast_list(struct net_device *dev) |
| { |
| struct port *port = netdev_priv(dev); |
| struct netdev_hw_addr *ha; |
| u8 diffs[ETH_ALEN], *addr; |
| int i; |
| static const u8 allmulti[] = { 0x01, 0x00, 0x00, 0x00, 0x00, 0x00 }; |
| |
| if ((dev->flags & IFF_ALLMULTI) && !(dev->flags & IFF_PROMISC)) { |
| for (i = 0; i < ETH_ALEN; i++) { |
| __raw_writel(allmulti[i], &port->regs->mcast_addr[i]); |
| __raw_writel(allmulti[i], &port->regs->mcast_mask[i]); |
| } |
| __raw_writel(DEFAULT_RX_CNTRL0 | RX_CNTRL0_ADDR_FLTR_EN, |
| &port->regs->rx_control[0]); |
| return; |
| } |
| |
| if ((dev->flags & IFF_PROMISC) || netdev_mc_empty(dev)) { |
| __raw_writel(DEFAULT_RX_CNTRL0 & ~RX_CNTRL0_ADDR_FLTR_EN, |
| &port->regs->rx_control[0]); |
| return; |
| } |
| |
| eth_zero_addr(diffs); |
| |
| addr = NULL; |
| netdev_for_each_mc_addr(ha, dev) { |
| if (!addr) |
| addr = ha->addr; /* first MAC address */ |
| for (i = 0; i < ETH_ALEN; i++) |
| diffs[i] |= addr[i] ^ ha->addr[i]; |
| } |
| |
| for (i = 0; i < ETH_ALEN; i++) { |
| __raw_writel(addr[i], &port->regs->mcast_addr[i]); |
| __raw_writel(~diffs[i], &port->regs->mcast_mask[i]); |
| } |
| |
| __raw_writel(DEFAULT_RX_CNTRL0 | RX_CNTRL0_ADDR_FLTR_EN, |
| &port->regs->rx_control[0]); |
| } |
| |
| |
| static int eth_ioctl(struct net_device *dev, struct ifreq *req, int cmd) |
| { |
| if (!netif_running(dev)) |
| return -EINVAL; |
| |
| if (cpu_is_ixp46x()) { |
| if (cmd == SIOCSHWTSTAMP) |
| return hwtstamp_set(dev, req); |
| if (cmd == SIOCGHWTSTAMP) |
| return hwtstamp_get(dev, req); |
| } |
| |
| return phy_mii_ioctl(dev->phydev, req, cmd); |
| } |
| |
| /* ethtool support */ |
| |
| static void ixp4xx_get_drvinfo(struct net_device *dev, |
| struct ethtool_drvinfo *info) |
| { |
| struct port *port = netdev_priv(dev); |
| |
| strscpy(info->driver, DRV_NAME, sizeof(info->driver)); |
| snprintf(info->fw_version, sizeof(info->fw_version), "%u:%u:%u:%u", |
| port->firmware[0], port->firmware[1], |
| port->firmware[2], port->firmware[3]); |
| strscpy(info->bus_info, "internal", sizeof(info->bus_info)); |
| } |
| |
| static int ixp4xx_get_ts_info(struct net_device *dev, |
| struct kernel_ethtool_ts_info *info) |
| { |
| struct port *port = netdev_priv(dev); |
| |
| if (port->phc_index < 0) |
| ixp46x_ptp_find(&port->timesync_regs, &port->phc_index); |
| |
| info->phc_index = port->phc_index; |
| |
| if (info->phc_index < 0) { |
| info->so_timestamping = |
| SOF_TIMESTAMPING_TX_SOFTWARE; |
| return 0; |
| } |
| info->so_timestamping = |
| SOF_TIMESTAMPING_TX_HARDWARE | |
| SOF_TIMESTAMPING_RX_HARDWARE | |
| SOF_TIMESTAMPING_RAW_HARDWARE; |
| info->tx_types = |
| (1 << HWTSTAMP_TX_OFF) | |
| (1 << HWTSTAMP_TX_ON); |
| info->rx_filters = |
| (1 << HWTSTAMP_FILTER_NONE) | |
| (1 << HWTSTAMP_FILTER_PTP_V1_L4_SYNC) | |
| (1 << HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ); |
| return 0; |
| } |
| |
| static const struct ethtool_ops ixp4xx_ethtool_ops = { |
| .get_drvinfo = ixp4xx_get_drvinfo, |
| .nway_reset = phy_ethtool_nway_reset, |
| .get_link = ethtool_op_get_link, |
| .get_ts_info = ixp4xx_get_ts_info, |
| .get_link_ksettings = phy_ethtool_get_link_ksettings, |
| .set_link_ksettings = phy_ethtool_set_link_ksettings, |
| }; |
| |
| |
| static int request_queues(struct port *port) |
| { |
| int err; |
| |
| err = qmgr_request_queue(RXFREE_QUEUE(port->id), RX_DESCS, 0, 0, |
| "%s:RX-free", port->netdev->name); |
| if (err) |
| return err; |
| |
| err = qmgr_request_queue(port->plat->rxq, RX_DESCS, 0, 0, |
| "%s:RX", port->netdev->name); |
| if (err) |
| goto rel_rxfree; |
| |
| err = qmgr_request_queue(TX_QUEUE(port->id), TX_DESCS, 0, 0, |
| "%s:TX", port->netdev->name); |
| if (err) |
| goto rel_rx; |
| |
| err = qmgr_request_queue(port->plat->txreadyq, TX_DESCS, 0, 0, |
| "%s:TX-ready", port->netdev->name); |
| if (err) |
| goto rel_tx; |
| |
| /* TX-done queue handles skbs sent out by the NPEs */ |
| if (!ports_open) { |
| err = qmgr_request_queue(TXDONE_QUEUE, TXDONE_QUEUE_LEN, 0, 0, |
| "%s:TX-done", DRV_NAME); |
| if (err) |
| goto rel_txready; |
| } |
| return 0; |
| |
| rel_txready: |
| qmgr_release_queue(port->plat->txreadyq); |
| rel_tx: |
| qmgr_release_queue(TX_QUEUE(port->id)); |
| rel_rx: |
| qmgr_release_queue(port->plat->rxq); |
| rel_rxfree: |
| qmgr_release_queue(RXFREE_QUEUE(port->id)); |
| printk(KERN_DEBUG "%s: unable to request hardware queues\n", |
| port->netdev->name); |
| return err; |
| } |
| |
| static void release_queues(struct port *port) |
| { |
| qmgr_release_queue(RXFREE_QUEUE(port->id)); |
| qmgr_release_queue(port->plat->rxq); |
| qmgr_release_queue(TX_QUEUE(port->id)); |
| qmgr_release_queue(port->plat->txreadyq); |
| |
| if (!ports_open) |
| qmgr_release_queue(TXDONE_QUEUE); |
| } |
| |
| static int init_queues(struct port *port) |
| { |
| int i; |
| |
| if (!ports_open) { |
| dma_pool = dma_pool_create(DRV_NAME, &port->netdev->dev, |
| POOL_ALLOC_SIZE, 32, 0); |
| if (!dma_pool) |
| return -ENOMEM; |
| } |
| |
| port->desc_tab = dma_pool_zalloc(dma_pool, GFP_KERNEL, &port->desc_tab_phys); |
| if (!port->desc_tab) |
| return -ENOMEM; |
| memset(port->rx_buff_tab, 0, sizeof(port->rx_buff_tab)); /* tables */ |
| memset(port->tx_buff_tab, 0, sizeof(port->tx_buff_tab)); |
| |
| /* Setup RX buffers */ |
| for (i = 0; i < RX_DESCS; i++) { |
| struct desc *desc = rx_desc_ptr(port, i); |
| buffer_t *buff; /* skb or kmalloc()ated memory */ |
| void *data; |
| #ifdef __ARMEB__ |
| if (!(buff = netdev_alloc_skb(port->netdev, RX_BUFF_SIZE))) |
| return -ENOMEM; |
| data = buff->data; |
| #else |
| if (!(buff = kmalloc(RX_BUFF_SIZE, GFP_KERNEL))) |
| return -ENOMEM; |
| data = buff; |
| #endif |
| desc->buf_len = MAX_MRU; |
| desc->data = dma_map_single(&port->netdev->dev, data, |
| RX_BUFF_SIZE, DMA_FROM_DEVICE); |
| if (dma_mapping_error(&port->netdev->dev, desc->data)) { |
| free_buffer(buff); |
| return -EIO; |
| } |
| desc->data += NET_IP_ALIGN; |
| port->rx_buff_tab[i] = buff; |
| } |
| |
| return 0; |
| } |
| |
| static void destroy_queues(struct port *port) |
| { |
| int i; |
| |
| if (port->desc_tab) { |
| for (i = 0; i < RX_DESCS; i++) { |
| struct desc *desc = rx_desc_ptr(port, i); |
| buffer_t *buff = port->rx_buff_tab[i]; |
| if (buff) { |
| dma_unmap_single(&port->netdev->dev, |
| desc->data - NET_IP_ALIGN, |
| RX_BUFF_SIZE, DMA_FROM_DEVICE); |
| free_buffer(buff); |
| } |
| } |
| for (i = 0; i < TX_DESCS; i++) { |
| struct desc *desc = tx_desc_ptr(port, i); |
| buffer_t *buff = port->tx_buff_tab[i]; |
| if (buff) { |
| dma_unmap_tx(port, desc); |
| free_buffer(buff); |
| } |
| } |
| dma_pool_free(dma_pool, port->desc_tab, port->desc_tab_phys); |
| port->desc_tab = NULL; |
| } |
| |
| if (!ports_open && dma_pool) { |
| dma_pool_destroy(dma_pool); |
| dma_pool = NULL; |
| } |
| } |
| |
| static int ixp4xx_do_change_mtu(struct net_device *dev, int new_mtu) |
| { |
| struct port *port = netdev_priv(dev); |
| struct npe *npe = port->npe; |
| int framesize, chunks; |
| struct msg msg = {}; |
| |
| /* adjust for ethernet headers */ |
| framesize = new_mtu + VLAN_ETH_HLEN; |
| /* max rx/tx 64 byte chunks */ |
| chunks = DIV_ROUND_UP(framesize, 64); |
| |
| msg.cmd = NPE_SETMAXFRAMELENGTHS; |
| msg.eth_id = port->id; |
| |
| /* Firmware wants to know buffer size in 64 byte chunks */ |
| msg.byte2 = chunks << 8; |
| msg.byte3 = chunks << 8; |
| |
| msg.byte4 = msg.byte6 = framesize >> 8; |
| msg.byte5 = msg.byte7 = framesize & 0xff; |
| |
| if (npe_send_recv_message(npe, &msg, "ETH_SET_MAX_FRAME_LENGTH")) |
| return -EIO; |
| netdev_dbg(dev, "set MTU on NPE %s to %d bytes\n", |
| npe_name(npe), new_mtu); |
| |
| return 0; |
| } |
| |
| static int ixp4xx_eth_change_mtu(struct net_device *dev, int new_mtu) |
| { |
| int ret; |
| |
| /* MTU can only be changed when the interface is up. We also |
| * set the MTU from dev->mtu when opening the device. |
| */ |
| if (dev->flags & IFF_UP) { |
| ret = ixp4xx_do_change_mtu(dev, new_mtu); |
| if (ret < 0) |
| return ret; |
| } |
| |
| WRITE_ONCE(dev->mtu, new_mtu); |
| |
| return 0; |
| } |
| |
| static int eth_open(struct net_device *dev) |
| { |
| struct port *port = netdev_priv(dev); |
| struct npe *npe = port->npe; |
| struct msg msg; |
| int i, err; |
| |
| if (!npe_running(npe)) { |
| err = npe_load_firmware(npe, npe_name(npe), &dev->dev); |
| if (err) |
| return err; |
| |
| if (npe_recv_message(npe, &msg, "ETH_GET_STATUS")) { |
| netdev_err(dev, "%s not responding\n", npe_name(npe)); |
| return -EIO; |
| } |
| port->firmware[0] = msg.byte4; |
| port->firmware[1] = msg.byte5; |
| port->firmware[2] = msg.byte6; |
| port->firmware[3] = msg.byte7; |
| } |
| |
| memset(&msg, 0, sizeof(msg)); |
| msg.cmd = NPE_VLAN_SETRXQOSENTRY; |
| msg.eth_id = port->id; |
| msg.byte5 = port->plat->rxq | 0x80; |
| msg.byte7 = port->plat->rxq << 4; |
| for (i = 0; i < 8; i++) { |
| msg.byte3 = i; |
| if (npe_send_recv_message(port->npe, &msg, "ETH_SET_RXQ")) |
| return -EIO; |
| } |
| |
| msg.cmd = NPE_EDB_SETPORTADDRESS; |
| msg.eth_id = PHYSICAL_ID(port->id); |
| msg.byte2 = dev->dev_addr[0]; |
| msg.byte3 = dev->dev_addr[1]; |
| msg.byte4 = dev->dev_addr[2]; |
| msg.byte5 = dev->dev_addr[3]; |
| msg.byte6 = dev->dev_addr[4]; |
| msg.byte7 = dev->dev_addr[5]; |
| if (npe_send_recv_message(port->npe, &msg, "ETH_SET_MAC")) |
| return -EIO; |
| |
| memset(&msg, 0, sizeof(msg)); |
| msg.cmd = NPE_FW_SETFIREWALLMODE; |
| msg.eth_id = port->id; |
| if (npe_send_recv_message(port->npe, &msg, "ETH_SET_FIREWALL_MODE")) |
| return -EIO; |
| |
| ixp4xx_do_change_mtu(dev, dev->mtu); |
| |
| if ((err = request_queues(port)) != 0) |
| return err; |
| |
| if ((err = init_queues(port)) != 0) { |
| destroy_queues(port); |
| release_queues(port); |
| return err; |
| } |
| |
| port->speed = 0; /* force "link up" message */ |
| phy_start(dev->phydev); |
| |
| for (i = 0; i < ETH_ALEN; i++) |
| __raw_writel(dev->dev_addr[i], &port->regs->hw_addr[i]); |
| __raw_writel(0x08, &port->regs->random_seed); |
| __raw_writel(0x12, &port->regs->partial_empty_threshold); |
| __raw_writel(0x30, &port->regs->partial_full_threshold); |
| __raw_writel(0x08, &port->regs->tx_start_bytes); |
| __raw_writel(0x15, &port->regs->tx_deferral); |
| __raw_writel(0x08, &port->regs->tx_2part_deferral[0]); |
| __raw_writel(0x07, &port->regs->tx_2part_deferral[1]); |
| __raw_writel(0x80, &port->regs->slot_time); |
| __raw_writel(0x01, &port->regs->int_clock_threshold); |
| |
| /* Populate queues with buffers, no failure after this point */ |
| for (i = 0; i < TX_DESCS; i++) |
| queue_put_desc(port->plat->txreadyq, |
| tx_desc_phys(port, i), tx_desc_ptr(port, i)); |
| |
| for (i = 0; i < RX_DESCS; i++) |
| queue_put_desc(RXFREE_QUEUE(port->id), |
| rx_desc_phys(port, i), rx_desc_ptr(port, i)); |
| |
| __raw_writel(TX_CNTRL1_RETRIES, &port->regs->tx_control[1]); |
| __raw_writel(DEFAULT_TX_CNTRL0, &port->regs->tx_control[0]); |
| __raw_writel(0, &port->regs->rx_control[1]); |
| __raw_writel(DEFAULT_RX_CNTRL0, &port->regs->rx_control[0]); |
| |
| napi_enable(&port->napi); |
| eth_set_mcast_list(dev); |
| netif_start_queue(dev); |
| |
| qmgr_set_irq(port->plat->rxq, QUEUE_IRQ_SRC_NOT_EMPTY, |
| eth_rx_irq, dev); |
| if (!ports_open) { |
| qmgr_set_irq(TXDONE_QUEUE, QUEUE_IRQ_SRC_NOT_EMPTY, |
| eth_txdone_irq, NULL); |
| qmgr_enable_irq(TXDONE_QUEUE); |
| } |
| ports_open++; |
| /* we may already have RX data, enables IRQ */ |
| napi_schedule(&port->napi); |
| return 0; |
| } |
| |
| static int eth_close(struct net_device *dev) |
| { |
| struct port *port = netdev_priv(dev); |
| struct msg msg; |
| int buffs = RX_DESCS; /* allocated RX buffers */ |
| int i; |
| |
| ports_open--; |
| qmgr_disable_irq(port->plat->rxq); |
| napi_disable(&port->napi); |
| netif_stop_queue(dev); |
| |
| while (queue_get_desc(RXFREE_QUEUE(port->id), port, 0) >= 0) |
| buffs--; |
| |
| memset(&msg, 0, sizeof(msg)); |
| msg.cmd = NPE_SETLOOPBACK_MODE; |
| msg.eth_id = port->id; |
| msg.byte3 = 1; |
| if (npe_send_recv_message(port->npe, &msg, "ETH_ENABLE_LOOPBACK")) |
| netdev_crit(dev, "unable to enable loopback\n"); |
| |
| i = 0; |
| do { /* drain RX buffers */ |
| while (queue_get_desc(port->plat->rxq, port, 0) >= 0) |
| buffs--; |
| if (!buffs) |
| break; |
| if (qmgr_stat_empty(TX_QUEUE(port->id))) { |
| /* we have to inject some packet */ |
| struct desc *desc; |
| u32 phys; |
| int n = queue_get_desc(port->plat->txreadyq, port, 1); |
| BUG_ON(n < 0); |
| desc = tx_desc_ptr(port, n); |
| phys = tx_desc_phys(port, n); |
| desc->buf_len = desc->pkt_len = 1; |
| wmb(); |
| queue_put_desc(TX_QUEUE(port->id), phys, desc); |
| } |
| udelay(1); |
| } while (++i < MAX_CLOSE_WAIT); |
| |
| if (buffs) |
| netdev_crit(dev, "unable to drain RX queue, %i buffer(s)" |
| " left in NPE\n", buffs); |
| #if DEBUG_CLOSE |
| if (!buffs) |
| netdev_debug(dev, "draining RX queue took %i cycles\n", i); |
| #endif |
| |
| buffs = TX_DESCS; |
| while (queue_get_desc(TX_QUEUE(port->id), port, 1) >= 0) |
| buffs--; /* cancel TX */ |
| |
| i = 0; |
| do { |
| while (queue_get_desc(port->plat->txreadyq, port, 1) >= 0) |
| buffs--; |
| if (!buffs) |
| break; |
| } while (++i < MAX_CLOSE_WAIT); |
| |
| if (buffs) |
| netdev_crit(dev, "unable to drain TX queue, %i buffer(s) " |
| "left in NPE\n", buffs); |
| #if DEBUG_CLOSE |
| if (!buffs) |
| netdev_debug(dev, "draining TX queues took %i cycles\n", i); |
| #endif |
| |
| msg.byte3 = 0; |
| if (npe_send_recv_message(port->npe, &msg, "ETH_DISABLE_LOOPBACK")) |
| netdev_crit(dev, "unable to disable loopback\n"); |
| |
| phy_stop(dev->phydev); |
| |
| if (!ports_open) |
| qmgr_disable_irq(TXDONE_QUEUE); |
| destroy_queues(port); |
| release_queues(port); |
| return 0; |
| } |
| |
| static const struct net_device_ops ixp4xx_netdev_ops = { |
| .ndo_open = eth_open, |
| .ndo_stop = eth_close, |
| .ndo_change_mtu = ixp4xx_eth_change_mtu, |
| .ndo_start_xmit = eth_xmit, |
| .ndo_set_rx_mode = eth_set_mcast_list, |
| .ndo_eth_ioctl = eth_ioctl, |
| .ndo_set_mac_address = eth_mac_addr, |
| .ndo_validate_addr = eth_validate_addr, |
| }; |
| |
| static struct eth_plat_info *ixp4xx_of_get_platdata(struct device *dev) |
| { |
| struct device_node *np = dev->of_node; |
| struct of_phandle_args queue_spec; |
| struct of_phandle_args npe_spec; |
| struct device_node *mdio_np; |
| struct eth_plat_info *plat; |
| u8 mac[ETH_ALEN]; |
| int ret; |
| |
| plat = devm_kzalloc(dev, sizeof(*plat), GFP_KERNEL); |
| if (!plat) |
| return NULL; |
| |
| ret = of_parse_phandle_with_fixed_args(np, "intel,npe-handle", 1, 0, |
| &npe_spec); |
| if (ret) { |
| dev_err(dev, "no NPE engine specified\n"); |
| return NULL; |
| } |
| /* NPE ID 0x00, 0x10, 0x20... */ |
| plat->npe = (npe_spec.args[0] << 4); |
| |
| /* Check if this device has an MDIO bus */ |
| mdio_np = of_get_child_by_name(np, "mdio"); |
| if (mdio_np) { |
| plat->has_mdio = true; |
| mdio_bus_np = mdio_np; |
| /* DO NOT put the mdio_np, it will be used */ |
| } |
| |
| /* Get the rx queue as a resource from queue manager */ |
| ret = of_parse_phandle_with_fixed_args(np, "queue-rx", 1, 0, |
| &queue_spec); |
| if (ret) { |
| dev_err(dev, "no rx queue phandle\n"); |
| return NULL; |
| } |
| plat->rxq = queue_spec.args[0]; |
| |
| /* Get the txready queue as resource from queue manager */ |
| ret = of_parse_phandle_with_fixed_args(np, "queue-txready", 1, 0, |
| &queue_spec); |
| if (ret) { |
| dev_err(dev, "no txready queue phandle\n"); |
| return NULL; |
| } |
| plat->txreadyq = queue_spec.args[0]; |
| |
| ret = of_get_mac_address(np, mac); |
| if (!ret) { |
| dev_info(dev, "Setting macaddr from DT %pM\n", mac); |
| memcpy(plat->hwaddr, mac, ETH_ALEN); |
| } |
| |
| return plat; |
| } |
| |
| static int ixp4xx_eth_probe(struct platform_device *pdev) |
| { |
| struct phy_device *phydev = NULL; |
| struct device *dev = &pdev->dev; |
| struct device_node *np = dev->of_node; |
| struct eth_plat_info *plat; |
| struct net_device *ndev; |
| struct port *port; |
| int err; |
| |
| plat = ixp4xx_of_get_platdata(dev); |
| if (!plat) |
| return -ENODEV; |
| |
| if (!(ndev = devm_alloc_etherdev(dev, sizeof(struct port)))) |
| return -ENOMEM; |
| |
| SET_NETDEV_DEV(ndev, dev); |
| port = netdev_priv(ndev); |
| port->netdev = ndev; |
| port->id = plat->npe; |
| port->phc_index = -1; |
| |
| /* Get the port resource and remap */ |
| port->regs = devm_platform_get_and_ioremap_resource(pdev, 0, NULL); |
| if (IS_ERR(port->regs)) |
| return PTR_ERR(port->regs); |
| |
| /* Register the MDIO bus if we have it */ |
| if (plat->has_mdio) { |
| err = ixp4xx_mdio_register(port->regs); |
| if (err) { |
| dev_err(dev, "failed to register MDIO bus\n"); |
| return err; |
| } |
| } |
| /* If the instance with the MDIO bus has not yet appeared, |
| * defer probing until it gets probed. |
| */ |
| if (!mdio_bus) |
| return -EPROBE_DEFER; |
| |
| ndev->netdev_ops = &ixp4xx_netdev_ops; |
| ndev->ethtool_ops = &ixp4xx_ethtool_ops; |
| ndev->tx_queue_len = 100; |
| /* Inherit the DMA masks from the platform device */ |
| ndev->dev.dma_mask = dev->dma_mask; |
| ndev->dev.coherent_dma_mask = dev->coherent_dma_mask; |
| |
| ndev->min_mtu = ETH_MIN_MTU; |
| ndev->max_mtu = MAX_MRU; |
| |
| netif_napi_add_weight(ndev, &port->napi, eth_poll, NAPI_WEIGHT); |
| |
| if (!(port->npe = npe_request(NPE_ID(port->id)))) |
| return -EIO; |
| |
| port->plat = plat; |
| npe_port_tab[NPE_ID(port->id)] = port; |
| if (is_valid_ether_addr(plat->hwaddr)) |
| eth_hw_addr_set(ndev, plat->hwaddr); |
| else |
| eth_hw_addr_random(ndev); |
| |
| platform_set_drvdata(pdev, ndev); |
| |
| __raw_writel(DEFAULT_CORE_CNTRL | CORE_RESET, |
| &port->regs->core_control); |
| udelay(50); |
| __raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control); |
| udelay(50); |
| |
| phydev = of_phy_get_and_connect(ndev, np, ixp4xx_adjust_link); |
| if (!phydev) { |
| err = -ENODEV; |
| dev_err(dev, "no phydev\n"); |
| goto err_free_mem; |
| } |
| |
| phydev->irq = PHY_POLL; |
| |
| if ((err = register_netdev(ndev))) |
| goto err_phy_dis; |
| |
| netdev_info(ndev, "%s: MII PHY %s on %s\n", ndev->name, phydev_name(phydev), |
| npe_name(port->npe)); |
| |
| return 0; |
| |
| err_phy_dis: |
| phy_disconnect(phydev); |
| err_free_mem: |
| npe_port_tab[NPE_ID(port->id)] = NULL; |
| npe_release(port->npe); |
| return err; |
| } |
| |
| static void ixp4xx_eth_remove(struct platform_device *pdev) |
| { |
| struct net_device *ndev = platform_get_drvdata(pdev); |
| struct phy_device *phydev = ndev->phydev; |
| struct port *port = netdev_priv(ndev); |
| |
| unregister_netdev(ndev); |
| phy_disconnect(phydev); |
| ixp4xx_mdio_remove(); |
| npe_port_tab[NPE_ID(port->id)] = NULL; |
| npe_release(port->npe); |
| } |
| |
| static const struct of_device_id ixp4xx_eth_of_match[] = { |
| { |
| .compatible = "intel,ixp4xx-ethernet", |
| }, |
| { }, |
| }; |
| |
| static struct platform_driver ixp4xx_eth_driver = { |
| .driver = { |
| .name = DRV_NAME, |
| .of_match_table = of_match_ptr(ixp4xx_eth_of_match), |
| }, |
| .probe = ixp4xx_eth_probe, |
| .remove_new = ixp4xx_eth_remove, |
| }; |
| module_platform_driver(ixp4xx_eth_driver); |
| |
| MODULE_AUTHOR("Krzysztof Halasa"); |
| MODULE_DESCRIPTION("Intel IXP4xx Ethernet driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:ixp4xx_eth"); |