blob: 946dd354256c11d2e461f4810e8b094ef08117f3 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/panel/lvds.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: LVDS Display Panel
maintainers:
- Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
- Thierry Reding <thierry.reding@gmail.com>
description: |+
LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple
incompatible data link layers have been used over time to transmit image data
to LVDS panels. This bindings supports display panels compatible with the
following specifications.
[JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February
1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA)
[LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National
Semiconductor
[VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video
Electronics Standards Association (VESA)
Device compatible with those specifications have been marketed under the
FPD-Link and FlatLink brands.
allOf:
- $ref: panel-common.yaml#
properties:
compatible:
contains:
const: panel-lvds
description:
Shall contain "panel-lvds" in addition to a mandatory panel-specific
compatible string defined in individual panel bindings. The "panel-lvds"
value shall never be used on its own.
data-mapping:
enum:
- jeida-18
- jeida-24
- vesa-24
description: |
The color signals mapping order.
LVDS data mappings are defined as follows.
- "jeida-18" - 18-bit data mapping compatible with the [JEIDA], [LDI] and
[VESA] specifications. Data are transferred as follows on 3 LVDS lanes.
Slot 0 1 2 3 4 5 6
________________ _________________
Clock \_______________________/
______ ______ ______ ______ ______ ______ ______
DATA0 ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__><
DATA1 ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__><
DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__><
- "jeida-24" - 24-bit data mapping compatible with the [DSIM] and [LDI]
specifications. Data are transferred as follows on 4 LVDS lanes.
Slot 0 1 2 3 4 5 6
________________ _________________
Clock \_______________________/
______ ______ ______ ______ ______ ______ ______
DATA0 ><__G2__><__R7__><__R6__><__R5__><__R4__><__R3__><__R2__><
DATA1 ><__B3__><__B2__><__G7__><__G6__><__G5__><__G4__><__G3__><
DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B7__><__B6__><__B5__><__B4__><
DATA3 ><_CTL3_><__B1__><__B0__><__G1__><__G0__><__R1__><__R0__><
- "vesa-24" - 24-bit data mapping compatible with the [VESA] specification.
Data are transferred as follows on 4 LVDS lanes.
Slot 0 1 2 3 4 5 6
________________ _________________
Clock \_______________________/
______ ______ ______ ______ ______ ______ ______
DATA0 ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__><
DATA1 ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__><
DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__><
DATA3 ><_CTL3_><__B7__><__B6__><__G7__><__G6__><__R7__><__R6__><
Control signals are mapped as follows.
CTL0: HSync
CTL1: VSync
CTL2: Data Enable
CTL3: 0
data-mirror:
type: boolean
description:
If set, reverse the bit order described in the data mappings below on all
data lanes, transmitting bits for slots 6 to 0 instead of 0 to 6.
port: true
ports: true
required:
- compatible
- data-mapping
- width-mm
- height-mm
- panel-timing
oneOf:
- required:
- port
- required:
- ports
...