diff --git a/drivers/watchdog/i6300esb.c b/drivers/watchdog/i6300esb.c
index 4f4287d..147462f 100644
--- a/drivers/watchdog/i6300esb.c
+++ b/drivers/watchdog/i6300esb.c
@@ -23,6 +23,7 @@
  *	Ported driver to kernel 2.6
  *  20171016 Radu Rendec <rrendec@arista.com>
  *	Change driver to use the watchdog subsystem
+ *	Add support for multiple 6300ESB devices
  */
 
 /*
@@ -52,10 +53,10 @@
 #define ESB_LOCK_REG    0x68            /* WDT lock register                 */
 
 /* Memory mapped registers */
-#define ESB_TIMER1_REG (BASEADDR + 0x00)/* Timer1 value after each reset     */
-#define ESB_TIMER2_REG (BASEADDR + 0x04)/* Timer2 value after each reset     */
-#define ESB_GINTSR_REG (BASEADDR + 0x08)/* General Interrupt Status Register */
-#define ESB_RELOAD_REG (BASEADDR + 0x0c)/* Reload register                   */
+#define ESB_TIMER1_REG(w) ((w)->base + 0x00)/* Timer1 value after each reset */
+#define ESB_TIMER2_REG(w) ((w)->base + 0x04)/* Timer2 value after each reset */
+#define ESB_GINTSR_REG(w) ((w)->base + 0x08)/* General Interrupt Status Reg  */
+#define ESB_RELOAD_REG(w) ((w)->base + 0x0c)/* Reload register               */
 
 /* Lock register bits */
 #define ESB_WDT_FUNC    (0x01 << 2)   /* Watchdog functionality            */
@@ -75,11 +76,7 @@
 #define ESB_UNLOCK1     0x80            /* Step 1 to unlock reset registers  */
 #define ESB_UNLOCK2     0x86            /* Step 2 to unlock reset registers  */
 
-/* internal variables */
-static void __iomem *BASEADDR;
-static struct pci_dev *esb_pci;
-
-/* We can only use 1 card due to the /dev/watchdog restriction */
+/* Probed devices counter; used only for printing the initial info message */
 static int cards_found;
 
 /* module parameters */
@@ -97,6 +94,15 @@ MODULE_PARM_DESC(nowayout,
 		"Watchdog cannot be stopped once started (default="
 				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
+/* internal variables */
+struct esb_dev {
+	struct watchdog_device wdd;
+	void __iomem *base;
+	struct pci_dev *pdev;
+};
+
+#define to_esb_dev(wptr) container_of(wptr, struct esb_dev, wdd)
+
 /*
  * Some i6300ESB specific functions
  */
@@ -107,35 +113,37 @@ MODULE_PARM_DESC(nowayout,
  * reload register. After this the appropriate registers can be written
  * to once before they need to be unlocked again.
  */
-static inline void esb_unlock_registers(void)
+static inline void esb_unlock_registers(struct esb_dev *edev)
 {
-	writew(ESB_UNLOCK1, ESB_RELOAD_REG);
-	writew(ESB_UNLOCK2, ESB_RELOAD_REG);
+	writew(ESB_UNLOCK1, ESB_RELOAD_REG(edev));
+	writew(ESB_UNLOCK2, ESB_RELOAD_REG(edev));
 }
 
 static int esb_timer_start(struct watchdog_device *wdd)
 {
+	struct esb_dev *edev = to_esb_dev(wdd);
 	int _wdd_nowayout = test_bit(WDOG_NO_WAY_OUT, &wdd->status);
 	u8 val;
 
-	esb_unlock_registers();
-	writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
+	esb_unlock_registers(edev);
+	writew(ESB_WDT_RELOAD, ESB_RELOAD_REG(edev));
 	/* Enable or Enable + Lock? */
 	val = ESB_WDT_ENABLE | (_wdd_nowayout ? ESB_WDT_LOCK : 0x00);
-	pci_write_config_byte(esb_pci, ESB_LOCK_REG, val);
+	pci_write_config_byte(edev->pdev, ESB_LOCK_REG, val);
 	return 0;
 }
 
 static int esb_timer_stop(struct watchdog_device *wdd)
 {
+	struct esb_dev *edev = to_esb_dev(wdd);
 	u8 val;
 
 	/* First, reset timers as suggested by the docs */
-	esb_unlock_registers();
-	writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
+	esb_unlock_registers(edev);
+	writew(ESB_WDT_RELOAD, ESB_RELOAD_REG(edev));
 	/* Then disable the WDT */
-	pci_write_config_byte(esb_pci, ESB_LOCK_REG, 0x0);
-	pci_read_config_byte(esb_pci, ESB_LOCK_REG, &val);
+	pci_write_config_byte(edev->pdev, ESB_LOCK_REG, 0x0);
+	pci_read_config_byte(edev->pdev, ESB_LOCK_REG, &val);
 
 	/* Returns 0 if the timer was disabled, non-zero otherwise */
 	return val & ESB_WDT_ENABLE;
@@ -143,8 +151,10 @@ static int esb_timer_stop(struct watchdog_device *wdd)
 
 static int esb_timer_keepalive(struct watchdog_device *wdd)
 {
-	esb_unlock_registers();
-	writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
+	struct esb_dev *edev = to_esb_dev(wdd);
+
+	esb_unlock_registers(edev);
+	writew(ESB_WDT_RELOAD, ESB_RELOAD_REG(edev));
 	/* FIXME: Do we need to flush anything here? */
 	return 0;
 }
@@ -152,6 +162,7 @@ static int esb_timer_keepalive(struct watchdog_device *wdd)
 static int esb_timer_set_heartbeat(struct watchdog_device *wdd,
 		unsigned int time)
 {
+	struct esb_dev *edev = to_esb_dev(wdd);
 	u32 val;
 
 	/* We shift by 9, so if we are passed a value of 1 sec,
@@ -161,16 +172,16 @@ static int esb_timer_set_heartbeat(struct watchdog_device *wdd,
 	val = time << 9;
 
 	/* Write timer 1 */
-	esb_unlock_registers();
-	writel(val, ESB_TIMER1_REG);
+	esb_unlock_registers(edev);
+	writel(val, ESB_TIMER1_REG(edev));
 
 	/* Write timer 2 */
-	esb_unlock_registers();
-	writel(val, ESB_TIMER2_REG);
+	esb_unlock_registers(edev);
+	writel(val, ESB_TIMER2_REG(edev));
 
 	/* Reload */
-	esb_unlock_registers();
-	writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
+	esb_unlock_registers(edev);
+	writew(ESB_WDT_RELOAD, ESB_RELOAD_REG(edev));
 
 	/* FIXME: Do we need to flush everything out? */
 
@@ -196,14 +207,6 @@ static const struct watchdog_ops esb_ops = {
 	.ping = esb_timer_keepalive,
 };
 
-static struct watchdog_device esb_dev = {
-	.info = &esb_info,
-	.ops = &esb_ops,
-	.min_timeout = 1,
-	.max_timeout = 2 * 0x03ff,
-	.timeout = WATCHDOG_HEARTBEAT,
-};
-
 /*
  * Data for PCI driver interface
  */
@@ -217,38 +220,38 @@ MODULE_DEVICE_TABLE(pci, esb_pci_tbl);
  *      Init & exit routines
  */
 
-static unsigned char esb_getdevice(struct pci_dev *pdev)
+static unsigned char esb_getdevice(struct esb_dev *edev)
 {
-	if (pci_enable_device(pdev)) {
-		dev_err(&pdev->dev, "failed to enable device\n");
+	if (pci_enable_device(edev->pdev)) {
+		dev_err(&edev->pdev->dev, "failed to enable device\n");
 		goto err_devput;
 	}
 
-	if (pci_request_region(pdev, 0, ESB_MODULE_NAME)) {
-		dev_err(&pdev->dev, "failed to request region\n");
+	if (pci_request_region(edev->pdev, 0, ESB_MODULE_NAME)) {
+		dev_err(&edev->pdev->dev, "failed to request region\n");
 		goto err_disable;
 	}
 
-	BASEADDR = pci_ioremap_bar(pdev, 0);
-	if (BASEADDR == NULL) {
+	edev->base = pci_ioremap_bar(edev->pdev, 0);
+	if (edev->base == NULL) {
 		/* Something's wrong here, BASEADDR has to be set */
-		dev_err(&pdev->dev, "failed to get BASEADDR\n");
+		dev_err(&edev->pdev->dev, "failed to get BASEADDR\n");
 		goto err_release;
 	}
 
 	/* Done */
-	esb_pci = pdev;
+	dev_set_drvdata(&edev->pdev->dev, edev);
 	return 1;
 
 err_release:
-	pci_release_region(pdev, 0);
+	pci_release_region(edev->pdev, 0);
 err_disable:
-	pci_disable_device(pdev);
+	pci_disable_device(edev->pdev);
 err_devput:
 	return 0;
 }
 
-static void esb_initdevice(void)
+static void esb_initdevice(struct esb_dev *edev)
 {
 	u8 val1;
 	u16 val2;
@@ -265,33 +268,34 @@ static void esb_initdevice(void)
 	 * any interrupts as there is not much we can do with it
 	 * right now.
 	 */
-	pci_write_config_word(esb_pci, ESB_CONFIG_REG, 0x0003);
+	pci_write_config_word(edev->pdev, ESB_CONFIG_REG, 0x0003);
 
 	/* Check that the WDT isn't already locked */
-	pci_read_config_byte(esb_pci, ESB_LOCK_REG, &val1);
+	pci_read_config_byte(edev->pdev, ESB_LOCK_REG, &val1);
 	if (val1 & ESB_WDT_LOCK)
-		dev_warn(&esb_pci->dev, "nowayout already set\n");
+		dev_warn(&edev->pdev->dev, "nowayout already set\n");
 
 	/* Set the timer to watchdog mode and disable it for now */
-	pci_write_config_byte(esb_pci, ESB_LOCK_REG, 0x00);
+	pci_write_config_byte(edev->pdev, ESB_LOCK_REG, 0x00);
 
 	/* Check if the watchdog was previously triggered */
-	esb_unlock_registers();
-	val2 = readw(ESB_RELOAD_REG);
+	esb_unlock_registers(edev);
+	val2 = readw(ESB_RELOAD_REG(edev));
 	if (val2 & ESB_WDT_TIMEOUT)
-		esb_dev.bootstatus = WDIOF_CARDRESET;
+		edev->wdd.bootstatus = WDIOF_CARDRESET;
 
 	/* Reset WDT_TIMEOUT flag and timers */
-	esb_unlock_registers();
-	writew((ESB_WDT_TIMEOUT | ESB_WDT_RELOAD), ESB_RELOAD_REG);
+	esb_unlock_registers(edev);
+	writew((ESB_WDT_TIMEOUT | ESB_WDT_RELOAD), ESB_RELOAD_REG(edev));
 
 	/* And set the correct timeout value */
-	esb_timer_set_heartbeat(&esb_dev, esb_dev.timeout);
+	esb_timer_set_heartbeat(&edev->wdd, edev->wdd.timeout);
 }
 
 static int esb_probe(struct pci_dev *pdev,
 		const struct pci_device_id *ent)
 {
+	struct esb_dev *edev;
 	int ret;
 
 	cards_found++;
@@ -299,26 +303,32 @@ static int esb_probe(struct pci_dev *pdev,
 		pr_info("Intel 6300ESB WatchDog Timer Driver v%s\n",
 			ESB_VERSION);
 
-	if (cards_found > 1) {
-		pr_err("This driver only supports 1 device\n");
-		return -ENODEV;
-	}
+	edev = devm_kzalloc(&pdev->dev, sizeof(*edev), GFP_KERNEL);
+	if (!edev)
+		return -ENOMEM;
 
 	/* Check whether or not the hardware watchdog is there */
-	if (!esb_getdevice(pdev) || esb_pci == NULL)
+	edev->pdev = pdev;
+	if (!esb_getdevice(edev))
 		return -ENODEV;
 
 	/* Initialize the watchdog and make sure it does not run */
-	if (watchdog_init_timeout(&esb_dev, heartbeat, NULL))
-		pr_info("heartbeat value must be 1<heartbeat<2046, using %u\n",
-			esb_dev.timeout);
-	watchdog_set_nowayout(&esb_dev, nowayout);
-	watchdog_stop_on_reboot(&esb_dev);
-	watchdog_stop_on_unregister(&esb_dev);
-	esb_initdevice();
+	edev->wdd.info = &esb_info;
+	edev->wdd.ops = &esb_ops;
+	edev->wdd.min_timeout = 1;
+	edev->wdd.max_timeout = 2 * 0x03ff;
+	edev->wdd.timeout = WATCHDOG_HEARTBEAT;
+	if (watchdog_init_timeout(&edev->wdd, heartbeat, NULL))
+		dev_info(&pdev->dev,
+			"heartbeat value must be 1<heartbeat<2046, using %u\n",
+			edev->wdd.timeout);
+	watchdog_set_nowayout(&edev->wdd, nowayout);
+	watchdog_stop_on_reboot(&edev->wdd);
+	watchdog_stop_on_unregister(&edev->wdd);
+	esb_initdevice(edev);
 
 	/* Register the watchdog so that userspace has access to it */
-	ret = watchdog_register_device(&esb_dev);
+	ret = watchdog_register_device(&edev->wdd);
 	if (ret != 0) {
 		dev_err(&pdev->dev,
 			"cannot register watchdog device (err=%d)\n", ret);
@@ -326,24 +336,24 @@ static int esb_probe(struct pci_dev *pdev,
 	}
 	dev_info(&pdev->dev,
 		"initialized (0x%p). heartbeat=%d sec (nowayout=%d)\n",
-		BASEADDR, esb_dev.timeout, nowayout);
+		edev->base, edev->wdd.timeout, nowayout);
 	return 0;
 
 err_unmap:
-	iounmap(BASEADDR);
-	pci_release_region(esb_pci, 0);
-	pci_disable_device(esb_pci);
-	esb_pci = NULL;
+	iounmap(edev->base);
+	pci_release_region(edev->pdev, 0);
+	pci_disable_device(edev->pdev);
 	return ret;
 }
 
 static void esb_remove(struct pci_dev *pdev)
 {
-	watchdog_unregister_device(&esb_dev);
-	iounmap(BASEADDR);
-	pci_release_region(esb_pci, 0);
-	pci_disable_device(esb_pci);
-	esb_pci = NULL;
+	struct esb_dev *edev = dev_get_drvdata(&pdev->dev);
+
+	watchdog_unregister_device(&edev->wdd);
+	iounmap(edev->base);
+	pci_release_region(edev->pdev, 0);
+	pci_disable_device(edev->pdev);
 }
 
 static struct pci_driver esb_driver = {