/*
 * Copyright (C) 2015 Freescale Semiconductor, Inc.
 *
 * This file is dual-licensed: you can use it either under the terms
 * of the GPL or the X11 license, at your option. Note that this dual
 * licensing only applies to this file, and not this project as a
 * whole.
 *
 *  a) This file is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License as
 *     published by the Free Software Foundation; either version 2 of the
 *     License, or (at your option) any later version.
 *
 *     This file is distributed in the hope that it will be useful,
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *     GNU General Public License for more details.
 *
 * Or, alternatively,
 *
 *  b) Permission is hereby granted, free of charge, to any person
 *     obtaining a copy of this software and associated documentation
 *     files (the "Software"), to deal in the Software without
 *     restriction, including without limitation the rights to use,
 *     copy, modify, merge, publish, distribute, sublicense, and/or
 *     sell copies of the Software, and to permit persons to whom the
 *     Software is furnished to do so, subject to the following
 *     conditions:
 *
 *     The above copyright notice and this permission notice shall be
 *     included in all copies or substantial portions of the Software.
 *
 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 *     OTHER DEALINGS IN THE SOFTWARE.
 */

/dts-v1/;

#include <dt-bindings/input/input.h>
#include "imx7d.dtsi"

/ {
	model = "Freescale i.MX7 SabreSD Board";
	compatible = "fsl,imx7d-sdb", "fsl,imx7d";

	memory {
		reg = <0x80000000 0x80000000>;
	};

	regulators {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <0>;

		reg_usb_otg1_vbus: regulator@0 {
			compatible = "regulator-fixed";
			reg = <0>;
			regulator-name = "usb_otg1_vbus";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
			enable-active-high;
		};

		reg_usb_otg2_vbus: regulator@1 {
			compatible = "regulator-fixed";
			reg = <1>;
			regulator-name = "usb_otg2_vbus";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
			enable-active-high;
		};

		reg_can2_3v3: regulator@2 {
			compatible = "regulator-fixed";
			reg = <2>;
			regulator-name = "can2-3v3";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
		};

		reg_vref_1v8: regulator@3 {
			compatible = "regulator-fixed";
			reg = <3>;
			regulator-name = "vref-1v8";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
		};
	};
};

&cpu0 {
	arm-supply = <&sw1a_reg>;
};

&i2c1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c1>;
	status = "okay";

	pmic: pfuze3000@08 {
		compatible = "fsl,pfuze3000";
		reg = <0x08>;

		regulators {
			sw1a_reg: sw1a {
				regulator-min-microvolt = <700000>;
				regulator-max-microvolt = <1475000>;
				regulator-boot-on;
				regulator-always-on;
				regulator-ramp-delay = <6250>;
			};

			/* use sw1c_reg to align with pfuze100/pfuze200 */
			sw1c_reg: sw1b {
				regulator-min-microvolt = <700000>;
				regulator-max-microvolt = <1475000>;
				regulator-boot-on;
				regulator-always-on;
				regulator-ramp-delay = <6250>;
			};

			sw2_reg: sw2 {
				regulator-min-microvolt = <1500000>;
				regulator-max-microvolt = <1850000>;
				regulator-boot-on;
				regulator-always-on;
			};

			sw3a_reg: sw3 {
				regulator-min-microvolt = <900000>;
				regulator-max-microvolt = <1650000>;
				regulator-boot-on;
				regulator-always-on;
			};

			swbst_reg: swbst {
				regulator-min-microvolt = <5000000>;
				regulator-max-microvolt = <5150000>;
			};

			snvs_reg: vsnvs {
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <3000000>;
				regulator-boot-on;
				regulator-always-on;
			};

			vref_reg: vrefddr {
				regulator-boot-on;
				regulator-always-on;
			};

			vgen1_reg: vldo1 {
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
			};

			vgen2_reg: vldo2 {
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <1550000>;
			};

			vgen3_reg: vccsd {
				regulator-min-microvolt = <2850000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
			};

			vgen4_reg: v33 {
				regulator-min-microvolt = <2850000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
			};

			vgen5_reg: vldo3 {
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
			};

			vgen6_reg: vldo4 {
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
			};
		};
	};
};

&i2c2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c2>;
	status = "okay";
};

&i2c3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c3>;
	status = "okay";
};

&i2c4 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c4>;
	status = "okay";

	codec: wm8960@1a {
		compatible = "wlf,wm8960";
		reg = <0x1a>;
		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
		clock-names = "mclk";
		wlf,shared-lrclk;
	};
};

&uart1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart1>;
	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
	status = "okay";
};

&usdhc1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usdhc1>;
	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
	wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
	enable-sdio-wakeup;
	keep-power-in-suspend;
	status = "okay";
};

&iomuxc {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_hog>;

	imx7d-sdb {
		pinctrl_hog: hoggrp {
			fsl,pins = <
				MX7D_PAD_UART3_CTS_B__GPIO4_IO7		0x14
				MX7D_PAD_ECSPI2_SS0__GPIO4_IO23		0x34  /* bt reg on */
			>;
		};

		pinctrl_i2c1: i2c1grp {
			fsl,pins = <
				MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
				MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
			>;
		};

		pinctrl_i2c2: i2c2grp {
			fsl,pins = <
				MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
				MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
			>;
		};

		pinctrl_i2c3: i2c3grp {
			fsl,pins = <
				MX7D_PAD_I2C3_SDA__I2C3_SDA		0x4000007f
				MX7D_PAD_I2C3_SCL__I2C3_SCL		0x4000007f
			>;
		};

		pinctrl_i2c4: i2c4grp {
			fsl,pins = <
				MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA		0x4000007f
				MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL		0x4000007f
			>;
		};


		pinctrl_uart1: uart1grp {
			fsl,pins = <
				MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
				MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
			>;
		};

		pinctrl_uart5: uart5grp {
			fsl,pins = <
				MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX	0x79
				MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX	0x79
				MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS	0x79
				MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS	0x79
			>;
		};

		pinctrl_uart6: uart6grp {
			fsl,pins = <
				MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX	0x79
				MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX	0x79
				MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS	0x79
				MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS	0x79
			>;
		};

		pinctrl_usdhc1: usdhc1grp {
			fsl,pins = <
				MX7D_PAD_SD1_CMD__SD1_CMD		0x59
				MX7D_PAD_SD1_CLK__SD1_CLK		0x19
				MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
				MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
				MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
				MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
				MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x59 /* CD */
				MX7D_PAD_SD1_WP__GPIO5_IO1		0x59 /* WP */
				MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0x59 /* vmmc */
			>;
		};

		pinctrl_usdhc2: usdhc2grp {
			fsl,pins = <
				MX7D_PAD_SD2_CMD__SD2_CMD		0x59
				MX7D_PAD_SD2_CLK__SD2_CLK		0x19
				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
				MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
				MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
				MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
				MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21	0x59 /* WL_REG_ON */
			>;
		};

		pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
			fsl,pins = <
				MX7D_PAD_SD2_CMD__SD2_CMD		0x5a
				MX7D_PAD_SD2_CLK__SD2_CLK		0x1a
				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5a
				MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5a
				MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5a
				MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5a
			>;
		};

		pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
			fsl,pins = <
				MX7D_PAD_SD2_CMD__SD2_CMD		0x5b
				MX7D_PAD_SD2_CLK__SD2_CLK		0x1b
				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5b
				MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5b
				MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5b
				MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5b
			>;
		};


		pinctrl_usdhc3: usdhc3grp {
			fsl,pins = <
				MX7D_PAD_SD3_CMD__SD3_CMD		0x59
				MX7D_PAD_SD3_CLK__SD3_CLK		0x19
				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
				MX7D_PAD_SD3_STROBE__SD3_STROBE		0x19
			>;
		};

		pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
			fsl,pins = <
				MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
				MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
				MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1a
			>;
		};

		pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
			fsl,pins = <
				MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
				MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
				MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1b
			>;
		};

	};
};