diff --git a/MAINTAINERS b/MAINTAINERS
index f26920f..80eebc1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5458,6 +5458,19 @@
 F:	include/uapi/linux/devlink.h
 F:	net/core/devlink.c
 
+DH ELECTRONICS IMX6 DHCOM BOARD SUPPORT
+M:	Christoph Niedermaier <cniedermaier@dh-electronics.com>
+L:	kernel@dh-electronics.com
+S:	Maintained
+F:	arch/arm/boot/dts/imx6*-dhcom-*
+
+DH ELECTRONICS STM32MP1 DHCOM/DHCOR BOARD SUPPORT
+M:	Marek Vasut <marex@denx.de>
+L:	kernel@dh-electronics.com
+S:	Maintained
+F:	arch/arm/boot/dts/stm32mp1*-dhcom-*
+F:	arch/arm/boot/dts/stm32mp1*-dhcor-*
+
 DIALOG SEMICONDUCTOR DRIVERS
 M:	Support Opensource <support.opensource@diasemi.com>
 S:	Supported
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
index 8077f17..ecb91fb 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
@@ -112,7 +112,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
index 02f8e72..05486cc 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
@@ -75,7 +75,7 @@
 	pinctrl-0 = <&emac_rgmii_pins>;
 	phy-supply = <&reg_gmac_3v3>;
 	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
index d17abb5..e99e764 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
@@ -70,7 +70,9 @@
 		regulator-name = "rst-usb-eth2";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb_eth2>;
-		gpio = <&gpio3 2 GPIO_ACTIVE_LOW>;
+		gpio = <&gpio3 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
 	};
 
 	reg_vdd_5v: regulator-5v {
@@ -95,7 +97,7 @@
 		clocks = <&osc_can>;
 		interrupt-parent = <&gpio4>;
 		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
-		spi-max-frequency = <100000>;
+		spi-max-frequency = <10000000>;
 		vdd-supply = <&reg_vdd_3v3>;
 		xceiver-supply = <&reg_vdd_5v>;
 	};
@@ -111,7 +113,7 @@
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-connection-type = "rgmii";
+	phy-connection-type = "rgmii-rxid";
 	phy-handle = <&ethphy>;
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
index 9db9b90b..42bbbb3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
@@ -91,10 +91,12 @@
 			reg_vdd_soc: BUCK1 {
 				regulator-name = "buck1";
 				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <900000>;
+				regulator-max-microvolt = <850000>;
 				regulator-boot-on;
 				regulator-always-on;
 				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <850000>;
+				nxp,dvs-standby-voltage = <800000>;
 			};
 
 			reg_vdd_arm: BUCK2 {
@@ -111,7 +113,7 @@
 			reg_vdd_dram: BUCK3 {
 				regulator-name = "buck3";
 				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <900000>;
+				regulator-max-microvolt = <950000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
@@ -150,7 +152,7 @@
 
 			reg_vdd_snvs: LDO2 {
 				regulator-name = "ldo2";
-				regulator-min-microvolt = <850000>;
+				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <900000>;
 				regulator-boot-on;
 				regulator-always-on;
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 8c15d9f..d12e4cb 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2590,9 +2590,10 @@
 			power-domains = <&dispcc MDSS_GDSC>;
 
 			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
 				 <&gcc GCC_DISP_SF_AXI_CLK>,
 				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
-			clock-names = "iface", "nrt_bus", "core";
+			clock-names = "iface", "bus", "nrt_bus", "core";
 
 			assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
 			assigned-clock-rates = <460000000>;
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index be799a5..b0056ae 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -147,8 +147,8 @@
 	bool
 
 config RESET_PISTACHIO
-	bool "Pistachio Reset Driver" if COMPILE_TEST
-	default MACH_PISTACHIO
+	bool "Pistachio Reset Driver"
+	depends on MIPS || COMPILE_TEST
 	help
 	  This enables the reset driver for ImgTec Pistachio SoCs.
 
diff --git a/drivers/reset/reset-brcmstb-rescal.c b/drivers/reset/reset-brcmstb-rescal.c
index b6f074d..433fa0c 100644
--- a/drivers/reset/reset-brcmstb-rescal.c
+++ b/drivers/reset/reset-brcmstb-rescal.c
@@ -38,7 +38,7 @@
 	}
 
 	ret = readl_poll_timeout(base + BRCM_RESCAL_STATUS, reg,
-				 !(reg & BRCM_RESCAL_STATUS_BIT), 100, 1000);
+				 (reg & BRCM_RESCAL_STATUS_BIT), 100, 1000);
 	if (ret) {
 		dev_err(data->dev, "time out on SATA/PCIe rescal\n");
 		return ret;
diff --git a/drivers/reset/reset-socfpga.c b/drivers/reset/reset-socfpga.c
index 2a72f86..8c6492e 100644
--- a/drivers/reset/reset-socfpga.c
+++ b/drivers/reset/reset-socfpga.c
@@ -92,3 +92,29 @@
 	for_each_matching_node(np, socfpga_early_reset_dt_ids)
 		a10_reset_init(np);
 }
+
+/*
+ * The early driver is problematic, because it doesn't register
+ * itself as a driver. This causes certain device links to prevent
+ * consumer devices from probing. The hacky solution is to register
+ * an empty driver, whose only job is to attach itself to the reset
+ * manager and call probe.
+ */
+static const struct of_device_id socfpga_reset_dt_ids[] = {
+	{ .compatible = "altr,rst-mgr", },
+	{ /* sentinel */ },
+};
+
+static int reset_simple_probe(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static struct platform_driver reset_socfpga_driver = {
+	.probe	= reset_simple_probe,
+	.driver = {
+		.name		= "socfpga-reset",
+		.of_match_table	= socfpga_reset_dt_ids,
+	},
+};
+builtin_platform_driver(reset_socfpga_driver);
diff --git a/drivers/reset/tegra/reset-bpmp.c b/drivers/reset/tegra/reset-bpmp.c
index 24d3395..4c5bba5 100644
--- a/drivers/reset/tegra/reset-bpmp.c
+++ b/drivers/reset/tegra/reset-bpmp.c
@@ -20,6 +20,7 @@
 	struct tegra_bpmp *bpmp = to_tegra_bpmp(rstc);
 	struct mrq_reset_request request;
 	struct tegra_bpmp_message msg;
+	int err;
 
 	memset(&request, 0, sizeof(request));
 	request.cmd = command;
@@ -30,7 +31,13 @@
 	msg.tx.data = &request;
 	msg.tx.size = sizeof(request);
 
-	return tegra_bpmp_transfer(bpmp, &msg);
+	err = tegra_bpmp_transfer(bpmp, &msg);
+	if (err)
+		return err;
+	if (msg.rx.ret)
+		return -EINVAL;
+
+	return 0;
 }
 
 static int tegra_bpmp_reset_module(struct reset_controller_dev *rstc,