USB: ark3116.c: remove dbg() usage
dbg() is a usb-serial specific macro. This patch converts
the ark3116.c driver to use dev_dbg() instead to tie into the
dynamic debug infrastructure.
CC: Rusty Russell <rusty@rustcorp.com.au>
CC: Alan Stern <stern@rowland.harvard.edu>
CC: Mauro Carvalho Chehab <mchehab@redhat.com>
CC: Bart Hartgers <bart.hartgers@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 9413b74..f8ce97d 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -265,7 +265,7 @@
hcr = (cflag & CRTSCTS) ? 0x03 : 0x00;
/* calc baudrate */
- dbg("%s - setting bps to %d", __func__, bps);
+ dev_dbg(&port->dev, "%s - setting bps to %d\n", __func__, bps);
eval = 0;
switch (bps) {
case 0:
@@ -292,8 +292,8 @@
/* keep old LCR_SBC bit */
lcr |= (priv->lcr & UART_LCR_SBC);
- dbg("%s - setting hcr:0x%02x,lcr:0x%02x,quot:%d",
- __func__, hcr, lcr, quot);
+ dev_dbg(&port->dev, "%s - setting hcr:0x%02x,lcr:0x%02x,quot:%d\n",
+ __func__, hcr, lcr, quot);
/* handshake control */
if (priv->hcr != hcr) {
@@ -375,8 +375,9 @@
result = usb_serial_generic_open(tty, port);
if (result) {
- dbg("%s - usb_serial_generic_open failed: %d",
- __func__, result);
+ dev_dbg(&port->dev,
+ "%s - usb_serial_generic_open failed: %d\n",
+ __func__, result);
goto err_out;
}
@@ -622,24 +623,26 @@
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d",
- __func__, status);
+ dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
+ __func__, status);
return;
default:
- dbg("%s - nonzero urb status received: %d",
- __func__, status);
+ dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
+ __func__, status);
break;
case 0: /* success */
/* discovered this by trail and error... */
if ((urb->actual_length == 4) && (data[0] == 0xe8)) {
const __u8 id = data[1]&UART_IIR_ID;
- dbg("%s: iir=%02x", __func__, data[1]);
+ dev_dbg(&port->dev, "%s: iir=%02x\n", __func__, data[1]);
if (id == UART_IIR_MSI) {
- dbg("%s: msr=%02x", __func__, data[3]);
+ dev_dbg(&port->dev, "%s: msr=%02x\n",
+ __func__, data[3]);
ark3116_update_msr(port, data[3]);
break;
} else if (id == UART_IIR_RLSI) {
- dbg("%s: lsr=%02x", __func__, data[2]);
+ dev_dbg(&port->dev, "%s: lsr=%02x\n",
+ __func__, data[2]);
ark3116_update_lsr(port, data[2]);
break;
}
