ssb: Remove the old, now unused, data structures
The old, now unused, data structures and SPROM extraction routines
are removed.
Signed-off-by: Larry Finger<Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/ssb/pci.c b/drivers/ssb/pci.c
index 8f600fc..9777dcb 100644
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
@@ -297,62 +297,6 @@
return err;
}
-static void sprom_extract_r1(struct ssb_sprom_r1 *out, const u16 *in)
-{
- int i;
- u16 v;
-
- SPEX(pci_spid, SSB_SPROM1_SPID, 0xFFFF, 0);
- SPEX(pci_svid, SSB_SPROM1_SVID, 0xFFFF, 0);
- SPEX(pci_pid, SSB_SPROM1_PID, 0xFFFF, 0);
- for (i = 0; i < 3; i++) {
- v = in[SPOFF(SSB_SPROM1_IL0MAC) + i];
- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
- }
- for (i = 0; i < 3; i++) {
- v = in[SPOFF(SSB_SPROM1_ET0MAC) + i];
- *(((__be16 *)out->et0mac) + i) = cpu_to_be16(v);
- }
- for (i = 0; i < 3; i++) {
- v = in[SPOFF(SSB_SPROM1_ET1MAC) + i];
- *(((__be16 *)out->et1mac) + i) = cpu_to_be16(v);
- }
- SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0);
- SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A,
- SSB_SPROM1_ETHPHY_ET1A_SHIFT);
- SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14);
- SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15);
- SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0);
- SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
- SSB_SPROM1_BINF_CCODE_SHIFT);
- SPEX(antenna_a, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTA,
- SSB_SPROM1_BINF_ANTA_SHIFT);
- SPEX(antenna_bg, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTBG,
- SSB_SPROM1_BINF_ANTBG_SHIFT);
- SPEX(pa0b0, SSB_SPROM1_PA0B0, 0xFFFF, 0);
- SPEX(pa0b1, SSB_SPROM1_PA0B1, 0xFFFF, 0);
- SPEX(pa0b2, SSB_SPROM1_PA0B2, 0xFFFF, 0);
- SPEX(pa1b0, SSB_SPROM1_PA1B0, 0xFFFF, 0);
- SPEX(pa1b1, SSB_SPROM1_PA1B1, 0xFFFF, 0);
- SPEX(pa1b2, SSB_SPROM1_PA1B2, 0xFFFF, 0);
- SPEX(gpio0, SSB_SPROM1_GPIOA, SSB_SPROM1_GPIOA_P0, 0);
- SPEX(gpio1, SSB_SPROM1_GPIOA, SSB_SPROM1_GPIOA_P1,
- SSB_SPROM1_GPIOA_P1_SHIFT);
- SPEX(gpio2, SSB_SPROM1_GPIOB, SSB_SPROM1_GPIOB_P2, 0);
- SPEX(gpio3, SSB_SPROM1_GPIOB, SSB_SPROM1_GPIOB_P3,
- SSB_SPROM1_GPIOB_P3_SHIFT);
- SPEX(maxpwr_a, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_A,
- SSB_SPROM1_MAXPWR_A_SHIFT);
- SPEX(maxpwr_bg, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_BG, 0);
- SPEX(itssi_a, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_A,
- SSB_SPROM1_ITSSI_A_SHIFT);
- SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
- SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
- SPEX(antenna_gain_a, SSB_SPROM1_AGAIN, SSB_SPROM1_AGAIN_A, 0);
- SPEX(antenna_gain_bg, SSB_SPROM1_AGAIN, SSB_SPROM1_AGAIN_BG,
- SSB_SPROM1_AGAIN_BG_SHIFT);
-}
-
static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
{
int i;
@@ -414,7 +358,7 @@
int i;
u16 v;
- /* extract the r1 variables */
+ /* extract the equivalent of the r1 variables */
for (i = 0; i < 3; i++) {
v = in[SPOFF(SSB_SPROM4_IL0MAC) + i];
*(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
@@ -435,6 +379,18 @@
SPEX(antenna_gain_a, SSB_SPROM4_AGAIN, SSB_SPROM4_AGAIN_0, 0);
SPEX(antenna_gain_bg, SSB_SPROM4_AGAIN, SSB_SPROM4_AGAIN_1,
SSB_SPROM4_AGAIN_1_SHIFT);
+ SPEX(maxpwr_bg, SSB_SPROM4_MAXP_BG, SSB_SPROM4_MAXP_BG_MASK, 0);
+ SPEX(itssi_bg, SSB_SPROM4_MAXP_BG, SSB_SPROM4_ITSSI_BG,
+ SSB_SPROM4_ITSSI_BG_SHIFT);
+ SPEX(maxpwr_a, SSB_SPROM4_MAXP_A, SSB_SPROM4_MAXP_A_MASK, 0);
+ SPEX(itssi_a, SSB_SPROM4_MAXP_A, SSB_SPROM4_ITSSI_A,
+ SSB_SPROM4_ITSSI_A_SHIFT);
+ SPEX(gpio0, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P0, 0);
+ SPEX(gpio1, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P1,
+ SSB_SPROM4_GPIOA_P1_SHIFT);
+ SPEX(gpio2, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P2, 0);
+ SPEX(gpio3, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P3,
+ SSB_SPROM4_GPIOB_P3_SHIFT);
/* TODO - get remaining rev 4 stuff needed */
}
@@ -444,13 +400,13 @@
memset(out, 0, sizeof(*out));
out->revision = in[size - 1] & 0x00FF;
+ ssb_printk(KERN_INFO PFX "SPROM revision %d detected.\n", out->revision);
if ((bus->chip_id & 0xFF00) == 0x4400) {
/* Workaround: The BCM44XX chip has a stupid revision
* number stored in the SPROM.
* Always extract r1. */
out->revision = 1;
sprom_extract_r123(out, in);
- sprom_extract_r1(&out->r1, in);
} else if (bus->chip_id == 0x4321) {
/* the BCM4328 has a chipid == 0x4321 and a rev 4 SPROM */
out->revision = 4;
@@ -460,7 +416,6 @@
goto unsupported;
if (out->revision >= 1 && out->revision <= 3) {
sprom_extract_r123(out, in);
- sprom_extract_r1(&out->r1, in);
}
if (out->revision == 4)
sprom_extract_r4(out, in);
@@ -472,7 +427,7 @@
unsupported:
ssb_printk(KERN_WARNING PFX "Unsupported SPROM revision %d "
"detected. Will extract v1\n", out->revision);
- sprom_extract_r1(&out->r1, in);
+ sprom_extract_r123(out, in);
return 0;
}
