[ARM] 5311/1: ep93xx: add core support for built in i2c bus
Allow the ep93xx platform init code to register the built-in i2c bus.
The EP93xx processor has two GPIO pins dedicated for an I2C bus. This
patch registers the platform supplied i2c_board_info and the necessary
platform_device information for the i2c-gpio driver to use these pins.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 48345fb..61da67f 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -34,6 +34,8 @@
#include <linux/amba/bus.h>
#include <linux/amba/serial.h>
#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
#include <asm/types.h>
#include <asm/setup.h>
@@ -497,6 +499,26 @@
platform_device_register(&ep93xx_eth_device);
}
+static struct i2c_gpio_platform_data ep93xx_i2c_data = {
+ .sda_pin = EP93XX_GPIO_LINE_EEDAT,
+ .sda_is_open_drain = 0,
+ .scl_pin = EP93XX_GPIO_LINE_EECLK,
+ .scl_is_open_drain = 0,
+ .udelay = 2,
+};
+
+static struct platform_device ep93xx_i2c_device = {
+ .name = "i2c-gpio",
+ .id = 0,
+ .dev.platform_data = &ep93xx_i2c_data,
+};
+
+void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num)
+{
+ i2c_register_board_info(0, devices, num);
+ platform_device_register(&ep93xx_i2c_device);
+}
+
extern void ep93xx_gpio_init(void);
void __init ep93xx_init_devices(void)
