[
    {
        "BriefDescription": "Core cycles where the core was running in a manner where Turbo may be clipped to the Non-AVX turbo schedule.",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3,4,5,6,7",
        "EventCode": "0x28",
        "EventName": "CORE_POWER.LVL0_TURBO_LICENSE",
        "PublicDescription": "Core cycles where the core was running with power-delivery for baseline license level 0.  This includes non-AVX codes, SSE, AVX 128-bit, and low-current AVX 256-bit codes.",
        "SampleAfterValue": "200003",
        "UMask": "0x7"
    },
    {
        "BriefDescription": "Core cycles where the core was running in a manner where Turbo may be clipped to the AVX2 turbo schedule.",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3,4,5,6,7",
        "EventCode": "0x28",
        "EventName": "CORE_POWER.LVL1_TURBO_LICENSE",
        "PublicDescription": "Core cycles where the core was running with power-delivery for license level 1.  This includes high current AVX 256-bit instructions as well as low current AVX 512-bit instructions.",
        "SampleAfterValue": "200003",
        "UMask": "0x18"
    },
    {
        "BriefDescription": "Core cycles where the core was running in a manner where Turbo may be clipped to the AVX512 turbo schedule.",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3,4,5,6,7",
        "EventCode": "0x28",
        "EventName": "CORE_POWER.LVL2_TURBO_LICENSE",
        "PublicDescription": "Core cycles where the core was running with power-delivery for license level 2 (introduced in Skylake Server michroarchtecture).  This includes high current AVX 512-bit instructions.",
        "SampleAfterValue": "200003",
        "UMask": "0x20"
    },
    {
        "BriefDescription": "Core cycles the core was throttled due to a pending power level request.",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3,4,5,6,7",
        "EventCode": "0x28",
        "EventName": "CORE_POWER.THROTTLE",
        "PublicDescription": "Core cycles the out-of-order engine was throttled due to a pending power level request.",
        "SampleAfterValue": "200003",
        "UMask": "0x40"
    },
    {
        "BriefDescription": "Number of hardware interrupts received by the processor.",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3,4,5,6,7",
        "EventCode": "0xCB",
        "EventName": "HW_INTERRUPTS.RECEIVED",
        "PublicDescription": "Counts the number of hardware interruptions received by the processor.",
        "SampleAfterValue": "203",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts number of cache lines that are dropped and not written back to L3 as they are deemed to be less likely to be reused shortly",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3,4,5,6,7",
        "EventCode": "0xFE",
        "EventName": "IDI_MISC.WB_DOWNGRADE",
        "PublicDescription": "Counts number of cache lines that are dropped and not written back to L3 as they are deemed to be less likely to be reused shortly.",
        "SampleAfterValue": "100003",
        "UMask": "0x4"
    },
    {
        "BriefDescription": "Counts number of cache lines that are allocated and written back to L3 with the intention that they are more likely to be reused shortly",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3,4,5,6,7",
        "EventCode": "0xFE",
        "EventName": "IDI_MISC.WB_UPGRADE",
        "PublicDescription": "Counts number of cache lines that are allocated and written back to L3 with the intention that they are more likely to be reused shortly.",
        "SampleAfterValue": "100003",
        "UMask": "0x2"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.ANY_RESPONSE have any response type.",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.ANY_RESPONSE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0000010491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT.ANY_SNOOP OCR.ALL_DATA_RD.L3_HIT.ANY_SNOOP OCR.ALL_DATA_RD.L3_HIT.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.L3_HIT.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F803C0491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT.HITM_OTHER_CORE OCR.ALL_DATA_RD.L3_HIT.HITM_OTHER_CORE OCR.ALL_DATA_RD.L3_HIT.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.L3_HIT.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x10003C0491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD OCR.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD OCR.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x08003C0491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x04003C0491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT.NO_SNOOP_NEEDED OCR.ALL_DATA_RD.L3_HIT.NO_SNOOP_NEEDED OCR.ALL_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x01003C0491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x08007C0491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT.SNOOP_MISS OCR.ALL_DATA_RD.L3_HIT.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.L3_HIT.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x02003C0491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT.SNOOP_NONE OCR.ALL_DATA_RD.L3_HIT.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.L3_HIT.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x00803C0491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_E.ANY_SNOOP  OCR.ALL_DATA_RD.L3_HIT_E.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.L3_HIT_E.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80080491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_E.HITM_OTHER_CORE  OCR.ALL_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000080491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD  OCR.ALL_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800080491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD  OCR.ALL_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400080491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED  OCR.ALL_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100080491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_E.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.L3_HIT_E.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200080491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_E.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.L3_HIT_E.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080080491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_F.ANY_SNOOP  OCR.ALL_DATA_RD.L3_HIT_F.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.L3_HIT_F.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80200491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_F.HITM_OTHER_CORE  OCR.ALL_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000200491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD  OCR.ALL_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800200491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD  OCR.ALL_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400200491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED  OCR.ALL_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100200491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_F.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.L3_HIT_F.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200200491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_F.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.L3_HIT_F.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080200491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_M.ANY_SNOOP  OCR.ALL_DATA_RD.L3_HIT_M.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.L3_HIT_M.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80040491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_M.HITM_OTHER_CORE  OCR.ALL_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000040491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD  OCR.ALL_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800040491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD  OCR.ALL_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400040491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED  OCR.ALL_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100040491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_M.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.L3_HIT_M.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200040491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_M.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.L3_HIT_M.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080040491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_S.ANY_SNOOP  OCR.ALL_DATA_RD.L3_HIT_S.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.L3_HIT_S.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80100491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_S.HITM_OTHER_CORE  OCR.ALL_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000100491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD  OCR.ALL_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800100491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD  OCR.ALL_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400100491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED  OCR.ALL_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100100491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_S.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.L3_HIT_S.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200100491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_S.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.L3_HIT_S.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080100491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP OCR.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80400491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE OCR.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080400491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED OCR.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100400491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.SUPPLIER_NONE.ANY_SNOOP  OCR.ALL_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80020491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE  OCR.ALL_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000020491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD  OCR.ALL_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800020491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD  OCR.ALL_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400020491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED  OCR.ALL_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100020491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200020491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080020491",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.ANY_RESPONSE have any response type.",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.ANY_RESPONSE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0000010490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT.ANY_SNOOP OCR.ALL_PF_DATA_RD.L3_HIT.ANY_SNOOP OCR.ALL_PF_DATA_RD.L3_HIT.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F803C0490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT.HITM_OTHER_CORE OCR.ALL_PF_DATA_RD.L3_HIT.HITM_OTHER_CORE OCR.ALL_PF_DATA_RD.L3_HIT.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x10003C0490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD OCR.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD OCR.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x08003C0490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x04003C0490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT.NO_SNOOP_NEEDED OCR.ALL_PF_DATA_RD.L3_HIT.NO_SNOOP_NEEDED OCR.ALL_PF_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x01003C0490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x08007C0490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT.SNOOP_MISS OCR.ALL_PF_DATA_RD.L3_HIT.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x02003C0490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT.SNOOP_NONE OCR.ALL_PF_DATA_RD.L3_HIT.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x00803C0490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_E.ANY_SNOOP  OCR.ALL_PF_DATA_RD.L3_HIT_E.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_E.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80080490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_E.HITM_OTHER_CORE  OCR.ALL_PF_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000080490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD  OCR.ALL_PF_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800080490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400080490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED  OCR.ALL_PF_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100080490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_E.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_E.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200080490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_E.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_E.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080080490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_F.ANY_SNOOP  OCR.ALL_PF_DATA_RD.L3_HIT_F.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_F.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80200490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_F.HITM_OTHER_CORE  OCR.ALL_PF_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000200490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD  OCR.ALL_PF_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800200490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400200490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED  OCR.ALL_PF_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100200490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_F.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_F.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200200490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_F.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_F.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080200490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_M.ANY_SNOOP  OCR.ALL_PF_DATA_RD.L3_HIT_M.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_M.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80040490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_M.HITM_OTHER_CORE  OCR.ALL_PF_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000040490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD  OCR.ALL_PF_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800040490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400040490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED  OCR.ALL_PF_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100040490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_M.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_M.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200040490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_M.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_M.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080040490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_S.ANY_SNOOP  OCR.ALL_PF_DATA_RD.L3_HIT_S.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_S.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80100490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_S.HITM_OTHER_CORE  OCR.ALL_PF_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000100490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD  OCR.ALL_PF_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800100490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400100490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED  OCR.ALL_PF_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100100490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_S.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_S.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200100490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_S.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_S.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080100490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP OCR.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80400490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE OCR.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080400490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED OCR.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100400490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.ANY_SNOOP  OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80020490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE  OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000020490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD  OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800020490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400020490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED  OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100020490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200020490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080020490",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.ANY_RESPONSE have any response type.",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.ANY_RESPONSE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0000010120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT.ANY_SNOOP OCR.ALL_PF_RFO.L3_HIT.ANY_SNOOP OCR.ALL_PF_RFO.L3_HIT.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.L3_HIT.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F803C0120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT.HITM_OTHER_CORE OCR.ALL_PF_RFO.L3_HIT.HITM_OTHER_CORE OCR.ALL_PF_RFO.L3_HIT.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.L3_HIT.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x10003C0120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_FWD OCR.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_FWD OCR.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x08003C0120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x04003C0120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT.NO_SNOOP_NEEDED OCR.ALL_PF_RFO.L3_HIT.NO_SNOOP_NEEDED OCR.ALL_PF_RFO.L3_HIT.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.L3_HIT.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x01003C0120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x08007C0120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT.SNOOP_MISS OCR.ALL_PF_RFO.L3_HIT.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.L3_HIT.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x02003C0120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT.SNOOP_NONE OCR.ALL_PF_RFO.L3_HIT.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.L3_HIT.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x00803C0120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_E.ANY_SNOOP  OCR.ALL_PF_RFO.L3_HIT_E.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.L3_HIT_E.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80080120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_E.HITM_OTHER_CORE  OCR.ALL_PF_RFO.L3_HIT_E.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.L3_HIT_E.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000080120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD  OCR.ALL_PF_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800080120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400080120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_E.NO_SNOOP_NEEDED  OCR.ALL_PF_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100080120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_E.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.L3_HIT_E.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200080120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_E.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.L3_HIT_E.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080080120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_F.ANY_SNOOP  OCR.ALL_PF_RFO.L3_HIT_F.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.L3_HIT_F.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80200120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_F.HITM_OTHER_CORE  OCR.ALL_PF_RFO.L3_HIT_F.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.L3_HIT_F.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000200120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD  OCR.ALL_PF_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800200120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400200120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_F.NO_SNOOP_NEEDED  OCR.ALL_PF_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100200120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_F.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.L3_HIT_F.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200200120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_F.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.L3_HIT_F.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080200120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_M.ANY_SNOOP  OCR.ALL_PF_RFO.L3_HIT_M.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.L3_HIT_M.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80040120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_M.HITM_OTHER_CORE  OCR.ALL_PF_RFO.L3_HIT_M.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.L3_HIT_M.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000040120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD  OCR.ALL_PF_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800040120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400040120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_M.NO_SNOOP_NEEDED  OCR.ALL_PF_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100040120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_M.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.L3_HIT_M.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200040120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_M.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.L3_HIT_M.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080040120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_S.ANY_SNOOP  OCR.ALL_PF_RFO.L3_HIT_S.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.L3_HIT_S.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80100120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_S.HITM_OTHER_CORE  OCR.ALL_PF_RFO.L3_HIT_S.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.L3_HIT_S.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000100120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD  OCR.ALL_PF_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800100120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400100120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_S.NO_SNOOP_NEEDED  OCR.ALL_PF_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100100120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_S.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.L3_HIT_S.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200100120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_S.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.L3_HIT_S.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080100120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP OCR.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80400120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE OCR.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080400120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED OCR.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100400120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.SUPPLIER_NONE.ANY_SNOOP  OCR.ALL_PF_RFO.SUPPLIER_NONE.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.SUPPLIER_NONE.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80020120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.SUPPLIER_NONE.HITM_OTHER_CORE  OCR.ALL_PF_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000020120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD  OCR.ALL_PF_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800020120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400020120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED  OCR.ALL_PF_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100020120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.SUPPLIER_NONE.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.SUPPLIER_NONE.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200020120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_PF_RFO.SUPPLIER_NONE.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_PF_RFO.SUPPLIER_NONE.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080020120",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.ANY_RESPONSE have any response type.",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.ANY_RESPONSE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x00000107F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.L3_HIT.ANY_SNOOP OCR.ALL_READS.L3_HIT.ANY_SNOOP OCR.ALL_READS.L3_HIT.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.L3_HIT.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F803C07F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.L3_HIT.HITM_OTHER_CORE OCR.ALL_READS.L3_HIT.HITM_OTHER_CORE OCR.ALL_READS.L3_HIT.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.L3_HIT.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x10003C07F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.L3_HIT.HIT_OTHER_CORE_FWD OCR.ALL_READS.L3_HIT.HIT_OTHER_CORE_FWD OCR.ALL_READS.L3_HIT.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.L3_HIT.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x08003C07F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.ALL_READS.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.ALL_READS.L3_HIT.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.L3_HIT.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x04003C07F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.L3_HIT.NO_SNOOP_NEEDED OCR.ALL_READS.L3_HIT.NO_SNOOP_NEEDED OCR.ALL_READS.L3_HIT.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.L3_HIT.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x01003C07F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.L3_HIT.SNOOP_HIT_WITH_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.L3_HIT.SNOOP_HIT_WITH_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x08007C07F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.L3_HIT.SNOOP_MISS OCR.ALL_READS.L3_HIT.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.L3_HIT.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x02003C07F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.L3_HIT.SNOOP_NONE OCR.ALL_READS.L3_HIT.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.L3_HIT.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x00803C07F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.L3_HIT_E.ANY_SNOOP  OCR.ALL_READS.L3_HIT_E.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.L3_HIT_E.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F800807F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.L3_HIT_E.HITM_OTHER_CORE  OCR.ALL_READS.L3_HIT_E.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.L3_HIT_E.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x10000807F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.L3_HIT_E.HIT_OTHER_CORE_FWD  OCR.ALL_READS.L3_HIT_E.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.L3_HIT_E.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x08000807F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.L3_HIT_E.HIT_OTHER_CORE_NO_FWD  OCR.ALL_READS.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x04000807F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.L3_HIT_E.NO_SNOOP_NEEDED  OCR.ALL_READS.L3_HIT_E.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.L3_HIT_E.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x01000807F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.L3_HIT_E.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.L3_HIT_E.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x02000807F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.L3_HIT_E.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.L3_HIT_E.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x00800807F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.L3_HIT_F.ANY_SNOOP  OCR.ALL_READS.L3_HIT_F.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.L3_HIT_F.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F802007F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.L3_HIT_F.HITM_OTHER_CORE  OCR.ALL_READS.L3_HIT_F.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.L3_HIT_F.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x10002007F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.L3_HIT_F.HIT_OTHER_CORE_FWD  OCR.ALL_READS.L3_HIT_F.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.L3_HIT_F.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x08002007F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.L3_HIT_F.HIT_OTHER_CORE_NO_FWD  OCR.ALL_READS.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x04002007F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.L3_HIT_F.NO_SNOOP_NEEDED  OCR.ALL_READS.L3_HIT_F.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.L3_HIT_F.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x01002007F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.L3_HIT_F.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.L3_HIT_F.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x02002007F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.L3_HIT_F.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.L3_HIT_F.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x00802007F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.L3_HIT_M.ANY_SNOOP  OCR.ALL_READS.L3_HIT_M.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.L3_HIT_M.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F800407F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.L3_HIT_M.HITM_OTHER_CORE  OCR.ALL_READS.L3_HIT_M.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.L3_HIT_M.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x10000407F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.L3_HIT_M.HIT_OTHER_CORE_FWD  OCR.ALL_READS.L3_HIT_M.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.L3_HIT_M.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x08000407F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.L3_HIT_M.HIT_OTHER_CORE_NO_FWD  OCR.ALL_READS.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x04000407F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.L3_HIT_M.NO_SNOOP_NEEDED  OCR.ALL_READS.L3_HIT_M.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.L3_HIT_M.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x01000407F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.L3_HIT_M.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.L3_HIT_M.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x02000407F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.L3_HIT_M.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.L3_HIT_M.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x00800407F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.L3_HIT_S.ANY_SNOOP  OCR.ALL_READS.L3_HIT_S.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.L3_HIT_S.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F801007F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.L3_HIT_S.HITM_OTHER_CORE  OCR.ALL_READS.L3_HIT_S.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.L3_HIT_S.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x10001007F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.L3_HIT_S.HIT_OTHER_CORE_FWD  OCR.ALL_READS.L3_HIT_S.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.L3_HIT_S.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x08001007F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.L3_HIT_S.HIT_OTHER_CORE_NO_FWD  OCR.ALL_READS.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x04001007F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.L3_HIT_S.NO_SNOOP_NEEDED  OCR.ALL_READS.L3_HIT_S.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.L3_HIT_S.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x01001007F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.L3_HIT_S.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.L3_HIT_S.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x02001007F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.L3_HIT_S.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.L3_HIT_S.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x00801007F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.PMM_HIT_LOCAL_PMM.ANY_SNOOP OCR.ALL_READS.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F804007F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.PMM_HIT_LOCAL_PMM.SNOOP_NONE OCR.ALL_READS.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x00804007F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED OCR.ALL_READS.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x01004007F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.SUPPLIER_NONE.ANY_SNOOP  OCR.ALL_READS.SUPPLIER_NONE.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.SUPPLIER_NONE.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F800207F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.SUPPLIER_NONE.HITM_OTHER_CORE  OCR.ALL_READS.SUPPLIER_NONE.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.SUPPLIER_NONE.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x10000207F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.SUPPLIER_NONE.HIT_OTHER_CORE_FWD  OCR.ALL_READS.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x08000207F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD  OCR.ALL_READS.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x04000207F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.SUPPLIER_NONE.NO_SNOOP_NEEDED  OCR.ALL_READS.SUPPLIER_NONE.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.SUPPLIER_NONE.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x01000207F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.SUPPLIER_NONE.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.SUPPLIER_NONE.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x02000207F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_READS.SUPPLIER_NONE.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_READS.SUPPLIER_NONE.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x00800207F7",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.ANY_RESPONSE have any response type.",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.ANY_RESPONSE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0000010122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.L3_HIT.ANY_SNOOP OCR.ALL_RFO.L3_HIT.ANY_SNOOP OCR.ALL_RFO.L3_HIT.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.L3_HIT.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F803C0122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.L3_HIT.HITM_OTHER_CORE OCR.ALL_RFO.L3_HIT.HITM_OTHER_CORE OCR.ALL_RFO.L3_HIT.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.L3_HIT.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x10003C0122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.L3_HIT.HIT_OTHER_CORE_FWD OCR.ALL_RFO.L3_HIT.HIT_OTHER_CORE_FWD OCR.ALL_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x08003C0122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.ALL_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.ALL_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x04003C0122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.L3_HIT.NO_SNOOP_NEEDED OCR.ALL_RFO.L3_HIT.NO_SNOOP_NEEDED OCR.ALL_RFO.L3_HIT.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.L3_HIT.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x01003C0122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x08007C0122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.L3_HIT.SNOOP_MISS OCR.ALL_RFO.L3_HIT.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.L3_HIT.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x02003C0122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.L3_HIT.SNOOP_NONE OCR.ALL_RFO.L3_HIT.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.L3_HIT.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x00803C0122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.L3_HIT_E.ANY_SNOOP  OCR.ALL_RFO.L3_HIT_E.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.L3_HIT_E.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80080122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.L3_HIT_E.HITM_OTHER_CORE  OCR.ALL_RFO.L3_HIT_E.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.L3_HIT_E.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000080122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD  OCR.ALL_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800080122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD  OCR.ALL_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400080122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.L3_HIT_E.NO_SNOOP_NEEDED  OCR.ALL_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100080122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.L3_HIT_E.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.L3_HIT_E.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200080122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.L3_HIT_E.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.L3_HIT_E.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080080122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.L3_HIT_F.ANY_SNOOP  OCR.ALL_RFO.L3_HIT_F.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.L3_HIT_F.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80200122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.L3_HIT_F.HITM_OTHER_CORE  OCR.ALL_RFO.L3_HIT_F.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.L3_HIT_F.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000200122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD  OCR.ALL_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800200122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD  OCR.ALL_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400200122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.L3_HIT_F.NO_SNOOP_NEEDED  OCR.ALL_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100200122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.L3_HIT_F.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.L3_HIT_F.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200200122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.L3_HIT_F.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.L3_HIT_F.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080200122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.L3_HIT_M.ANY_SNOOP  OCR.ALL_RFO.L3_HIT_M.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.L3_HIT_M.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80040122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.L3_HIT_M.HITM_OTHER_CORE  OCR.ALL_RFO.L3_HIT_M.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.L3_HIT_M.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000040122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD  OCR.ALL_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800040122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD  OCR.ALL_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400040122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.L3_HIT_M.NO_SNOOP_NEEDED  OCR.ALL_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100040122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.L3_HIT_M.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.L3_HIT_M.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200040122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.L3_HIT_M.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.L3_HIT_M.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080040122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.L3_HIT_S.ANY_SNOOP  OCR.ALL_RFO.L3_HIT_S.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.L3_HIT_S.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80100122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.L3_HIT_S.HITM_OTHER_CORE  OCR.ALL_RFO.L3_HIT_S.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.L3_HIT_S.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000100122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD  OCR.ALL_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800100122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD  OCR.ALL_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400100122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.L3_HIT_S.NO_SNOOP_NEEDED  OCR.ALL_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100100122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.L3_HIT_S.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.L3_HIT_S.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200100122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.L3_HIT_S.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.L3_HIT_S.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080100122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP OCR.ALL_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80400122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE OCR.ALL_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080400122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED OCR.ALL_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100400122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.SUPPLIER_NONE.ANY_SNOOP  OCR.ALL_RFO.SUPPLIER_NONE.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.SUPPLIER_NONE.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80020122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.SUPPLIER_NONE.HITM_OTHER_CORE  OCR.ALL_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000020122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD  OCR.ALL_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800020122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD  OCR.ALL_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400020122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED  OCR.ALL_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100020122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.SUPPLIER_NONE.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.SUPPLIER_NONE.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200020122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "OCR.ALL_RFO.SUPPLIER_NONE.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.ALL_RFO.SUPPLIER_NONE.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080020122",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads have any response type.",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.ANY_RESPONSE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0000010004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_HIT.ANY_SNOOP OCR.DEMAND_CODE_RD.L3_HIT.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F803C0004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_HIT.HITM_OTHER_CORE OCR.DEMAND_CODE_RD.L3_HIT.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x10003C0004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_HIT.HIT_OTHER_CORE_FWD OCR.DEMAND_CODE_RD.L3_HIT.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x08003C0004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.DEMAND_CODE_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x04003C0004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_HIT.NO_SNOOP_NEEDED OCR.DEMAND_CODE_RD.L3_HIT.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x01003C0004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x08007C0004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x02003C0004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x00803C0004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_E.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_E.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80080004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_E.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_E.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000080004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800080004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400080004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_E.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_E.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100080004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_E.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200080004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_E.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080080004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_F.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_F.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80200004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_F.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_F.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000200004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800200004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400200004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_F.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_F.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100200004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_F.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200200004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_F.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080200004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_M.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_M.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80040004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_M.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_M.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000040004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800040004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400040004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_M.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_M.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100040004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_M.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200040004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_M.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080040004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_S.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_S.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80100004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_S.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_S.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000100004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800100004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400100004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_S.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_S.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100100004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_S.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200100004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_S.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080100004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80400004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080400004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100400004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.SUPPLIER_NONE.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.SUPPLIER_NONE.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80020004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000020004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800020004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400020004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100020004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200020004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand code reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080020004",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads have any response type.",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.ANY_RESPONSE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0000010001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_HIT.ANY_SNOOP OCR.DEMAND_DATA_RD.L3_HIT.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F803C0001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_HIT.HITM_OTHER_CORE OCR.DEMAND_DATA_RD.L3_HIT.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x10003C0001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD OCR.DEMAND_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x08003C0001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.DEMAND_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x04003C0001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_HIT.NO_SNOOP_NEEDED OCR.DEMAND_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x01003C0001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x08007C0001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x02003C0001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x00803C0001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_E.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_E.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80080001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000080001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800080001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400080001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100080001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_E.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200080001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_E.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080080001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_F.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_F.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80200001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000200001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800200001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400200001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100200001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_F.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200200001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_F.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080200001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_M.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_M.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80040001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000040001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800040001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400040001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100040001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_M.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200040001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_M.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080040001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_S.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_S.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80100001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000100001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800100001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400100001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100100001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_S.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200100001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_S.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080100001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80400001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080400001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100400001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80020001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000020001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800020001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400020001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100020001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200020001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts demand data reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080020001",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs) have any response type.",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.ANY_RESPONSE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0000010002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_HIT.ANY_SNOOP OCR.DEMAND_RFO.L3_HIT.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.L3_HIT.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F803C0002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_HIT.HITM_OTHER_CORE OCR.DEMAND_RFO.L3_HIT.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.L3_HIT.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x10003C0002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_HIT.HIT_OTHER_CORE_FWD OCR.DEMAND_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x08003C0002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.DEMAND_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x04003C0002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_HIT.NO_SNOOP_NEEDED OCR.DEMAND_RFO.L3_HIT.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.L3_HIT.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x01003C0002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs)",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x08007C0002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_HIT.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.L3_HIT.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x02003C0002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_HIT.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.L3_HIT.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x00803C0002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_E.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.L3_HIT_E.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80080002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_E.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.L3_HIT_E.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000080002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800080002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400080002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100080002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs)",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.L3_HIT_E.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200080002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs)",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.L3_HIT_E.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080080002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_F.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.L3_HIT_F.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80200002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_F.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.L3_HIT_F.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000200002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800200002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400200002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100200002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs)",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.L3_HIT_F.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200200002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs)",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.L3_HIT_F.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080200002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_M.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.L3_HIT_M.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80040002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_M.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.L3_HIT_M.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000040002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800040002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400040002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100040002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs)",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.L3_HIT_M.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200040002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs)",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.L3_HIT_M.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080040002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_S.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.L3_HIT_S.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80100002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_S.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.L3_HIT_S.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000100002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800100002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400100002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100100002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs)",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.L3_HIT_S.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200100002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs)",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.L3_HIT_S.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080100002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80400002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080400002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100400002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.SUPPLIER_NONE.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.SUPPLIER_NONE.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80020002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000020002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800020002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400020002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100020002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs)",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.SUPPLIER_NONE.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200020002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all demand data writes (RFOs)",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.DEMAND_RFO.SUPPLIER_NONE.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080020002",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests have any response type.",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.ANY_RESPONSE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0000018000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests OCR.OTHER.L3_HIT.ANY_SNOOP OCR.OTHER.L3_HIT.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.L3_HIT.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F803C8000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests OCR.OTHER.L3_HIT.HITM_OTHER_CORE OCR.OTHER.L3_HIT.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.L3_HIT.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x10003C8000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests OCR.OTHER.L3_HIT.HIT_OTHER_CORE_FWD OCR.OTHER.L3_HIT.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.L3_HIT.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x08003C8000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests OCR.OTHER.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.OTHER.L3_HIT.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.L3_HIT.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x04003C8000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests OCR.OTHER.L3_HIT.NO_SNOOP_NEEDED OCR.OTHER.L3_HIT.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.L3_HIT.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x01003C8000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.L3_HIT.SNOOP_HIT_WITH_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x08007C8000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests OCR.OTHER.L3_HIT.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.L3_HIT.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x02003C8000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests OCR.OTHER.L3_HIT.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.L3_HIT.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x00803C8000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_E.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.L3_HIT_E.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80088000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_E.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.L3_HIT_E.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000088000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_E.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.L3_HIT_E.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800088000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400088000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_E.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.L3_HIT_E.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100088000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.L3_HIT_E.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200088000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.L3_HIT_E.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080088000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_F.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.L3_HIT_F.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80208000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_F.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.L3_HIT_F.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000208000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_F.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.L3_HIT_F.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800208000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400208000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_F.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.L3_HIT_F.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100208000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.L3_HIT_F.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200208000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.L3_HIT_F.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080208000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_M.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.L3_HIT_M.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80048000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_M.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.L3_HIT_M.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000048000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_M.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.L3_HIT_M.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800048000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400048000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_M.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.L3_HIT_M.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100048000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.L3_HIT_M.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200048000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.L3_HIT_M.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080048000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_S.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.L3_HIT_S.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80108000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_S.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.L3_HIT_S.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000108000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_S.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.L3_HIT_S.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800108000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400108000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_S.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.L3_HIT_S.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100108000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.L3_HIT_S.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200108000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.L3_HIT_S.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080108000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests OCR.OTHER.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80408000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests OCR.OTHER.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080408000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests OCR.OTHER.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100408000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests  OCR.OTHER.SUPPLIER_NONE.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.SUPPLIER_NONE.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80028000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests  OCR.OTHER.SUPPLIER_NONE.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.SUPPLIER_NONE.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000028000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests  OCR.OTHER.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800028000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests  OCR.OTHER.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400028000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests  OCR.OTHER.SUPPLIER_NONE.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.SUPPLIER_NONE.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100028000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.SUPPLIER_NONE.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200028000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts any other requests",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.OTHER.SUPPLIER_NONE.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080028000",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests have any response type.",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.ANY_RESPONSE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0000010400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_HIT.ANY_SNOOP OCR.PF_L1D_AND_SW.L3_HIT.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F803C0400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_HIT.HITM_OTHER_CORE OCR.PF_L1D_AND_SW.L3_HIT.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x10003C0400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_HIT.HIT_OTHER_CORE_FWD OCR.PF_L1D_AND_SW.L3_HIT.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x08003C0400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.PF_L1D_AND_SW.L3_HIT.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x04003C0400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_HIT.NO_SNOOP_NEEDED OCR.PF_L1D_AND_SW.L3_HIT.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x01003C0400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT.SNOOP_HIT_WITH_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x08007C0400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_HIT.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x02003C0400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_HIT.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x00803C0400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_E.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_E.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80080400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_E.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_E.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000080400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_E.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_E.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800080400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400080400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_E.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_E.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100080400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_E.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200080400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_E.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080080400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_F.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_F.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80200400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_F.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_F.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000200400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_F.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_F.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800200400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400200400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_F.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_F.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100200400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_F.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200200400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_F.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080200400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_M.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_M.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80040400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_M.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_M.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000040400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_M.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_M.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800040400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400040400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_M.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_M.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100040400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_M.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200040400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_M.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080040400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_S.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_S.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80100400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_S.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_S.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000100400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_S.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_S.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800100400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400100400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_S.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_S.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100100400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_S.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200100400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_S.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080100400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80400400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080400400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100400400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.SUPPLIER_NONE.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.SUPPLIER_NONE.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80020400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.SUPPLIER_NONE.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.SUPPLIER_NONE.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000020400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800020400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400020400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.SUPPLIER_NONE.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.SUPPLIER_NONE.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100020400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.SUPPLIER_NONE.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200020400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L1D_AND_SW.SUPPLIER_NONE.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080020400",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads have any response type.",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.ANY_RESPONSE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0000010010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_HIT.ANY_SNOOP OCR.PF_L2_DATA_RD.L3_HIT.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F803C0010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_HIT.HITM_OTHER_CORE OCR.PF_L2_DATA_RD.L3_HIT.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x10003C0010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD OCR.PF_L2_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x08003C0010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.PF_L2_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x04003C0010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_HIT.NO_SNOOP_NEEDED OCR.PF_L2_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x01003C0010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x08007C0010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_HIT.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x02003C0010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_HIT.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x00803C0010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_E.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_E.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80080010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000080010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800080010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400080010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100080010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_E.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200080010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_E.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080080010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_F.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_F.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80200010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000200010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800200010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400200010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100200010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_F.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200200010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_F.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080200010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_M.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_M.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80040010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000040010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800040010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400040010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100040010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_M.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200040010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_M.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080040010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_S.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_S.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80100010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000100010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800100010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400100010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100100010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_S.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200100010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_S.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080100010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80400010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080400010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100400010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80020010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000020010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800020010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400020010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100020010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200020010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080020010",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs have any response type.",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.ANY_RESPONSE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0000010020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_HIT.ANY_SNOOP OCR.PF_L2_RFO.L3_HIT.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.L3_HIT.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F803C0020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_HIT.HITM_OTHER_CORE OCR.PF_L2_RFO.L3_HIT.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.L3_HIT.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x10003C0020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_HIT.HIT_OTHER_CORE_FWD OCR.PF_L2_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x08003C0020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.PF_L2_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x04003C0020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_HIT.NO_SNOOP_NEEDED OCR.PF_L2_RFO.L3_HIT.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.L3_HIT.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x01003C0020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x08007C0020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_HIT.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.L3_HIT.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x02003C0020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_HIT.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.L3_HIT.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x00803C0020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_E.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.L3_HIT_E.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80080020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_E.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.L3_HIT_E.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000080020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800080020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400080020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100080020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.L3_HIT_E.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200080020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.L3_HIT_E.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080080020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_F.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.L3_HIT_F.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80200020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_F.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.L3_HIT_F.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000200020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800200020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400200020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100200020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.L3_HIT_F.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200200020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.L3_HIT_F.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080200020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_M.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.L3_HIT_M.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80040020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_M.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.L3_HIT_M.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000040020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800040020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400040020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100040020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.L3_HIT_M.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200040020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.L3_HIT_M.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080040020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_S.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.L3_HIT_S.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80100020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_S.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.L3_HIT_S.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000100020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800100020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400100020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100100020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.L3_HIT_S.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200100020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.L3_HIT_S.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080100020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80400020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080400020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100400020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.SUPPLIER_NONE.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.SUPPLIER_NONE.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80020020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000020020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800020020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400020020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100020020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.SUPPLIER_NONE.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200020020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L2_RFO.SUPPLIER_NONE.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080020020",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads have any response type.",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.ANY_RESPONSE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0000010080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_HIT.ANY_SNOOP OCR.PF_L3_DATA_RD.L3_HIT.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F803C0080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_HIT.HITM_OTHER_CORE OCR.PF_L3_DATA_RD.L3_HIT.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x10003C0080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD OCR.PF_L3_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x08003C0080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.PF_L3_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x04003C0080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_HIT.NO_SNOOP_NEEDED OCR.PF_L3_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x01003C0080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x08007C0080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_HIT.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x02003C0080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_HIT.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x00803C0080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_E.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_E.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80080080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000080080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800080080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400080080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100080080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_E.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200080080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_E.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080080080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_F.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_F.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80200080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000200080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800200080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400200080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100200080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_F.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200200080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_F.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080200080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_M.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_M.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80040080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000040080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800040080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400040080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100040080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_M.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200040080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_M.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080040080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_S.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_S.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80100080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000100080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800100080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400100080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100100080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_S.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200100080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_S.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080100080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80400080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080400080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100400080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80020080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000020080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800020080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400020080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100020080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200020080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080020080",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs have any response type.",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.ANY_RESPONSE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0000010100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_HIT.ANY_SNOOP OCR.PF_L3_RFO.L3_HIT.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.L3_HIT.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F803C0100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_HIT.HITM_OTHER_CORE OCR.PF_L3_RFO.L3_HIT.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.L3_HIT.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x10003C0100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_HIT.HIT_OTHER_CORE_FWD OCR.PF_L3_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x08003C0100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.PF_L3_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x04003C0100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_HIT.NO_SNOOP_NEEDED OCR.PF_L3_RFO.L3_HIT.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.L3_HIT.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x01003C0100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x08007C0100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_HIT.SNOOP_MISS",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.L3_HIT.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x02003C0100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_HIT.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.L3_HIT.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x00803C0100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_E.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.L3_HIT_E.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80080100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_E.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.L3_HIT_E.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000080100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800080100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400080100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100080100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.L3_HIT_E.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200080100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.L3_HIT_E.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080080100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_F.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.L3_HIT_F.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80200100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_F.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.L3_HIT_F.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000200100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800200100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400200100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100200100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.L3_HIT_F.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200200100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.L3_HIT_F.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080200100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_M.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.L3_HIT_M.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80040100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_M.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.L3_HIT_M.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000040100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800040100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400040100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100040100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.L3_HIT_M.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200040100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.L3_HIT_M.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080040100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_S.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.L3_HIT_S.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80100100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_S.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.L3_HIT_S.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000100100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800100100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400100100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100100100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.L3_HIT_S.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200100100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.L3_HIT_S.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080100100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80400100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080400100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100400100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.SUPPLIER_NONE.ANY_SNOOP",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.SUPPLIER_NONE.ANY_SNOOP",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x3F80020100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x1000020100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0800020100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0400020100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0100020100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.SUPPLIER_NONE.SNOOP_MISS",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0200020100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3",
        "EventCode": "0xB7, 0xBB",
        "EventName": "OCR.PF_L3_RFO.SUPPLIER_NONE.SNOOP_NONE",
        "MSRIndex": "0x1a6,0x1a7",
        "MSRValue": "0x0080020100",
        "Offcore": "1",
        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
        "SampleAfterValue": "100003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Number of PREFETCHNTA instructions executed.",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3,4,5,6,7",
        "EventCode": "0x32",
        "EventName": "SW_PREFETCH_ACCESS.NTA",
        "SampleAfterValue": "2000003",
        "UMask": "0x1"
    },
    {
        "BriefDescription": "Number of PREFETCHW instructions executed.",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3,4,5,6,7",
        "EventCode": "0x32",
        "EventName": "SW_PREFETCH_ACCESS.PREFETCHW",
        "SampleAfterValue": "2000003",
        "UMask": "0x8"
    },
    {
        "BriefDescription": "Number of PREFETCHT0 instructions executed.",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3,4,5,6,7",
        "EventCode": "0x32",
        "EventName": "SW_PREFETCH_ACCESS.T0",
        "SampleAfterValue": "2000003",
        "UMask": "0x2"
    },
    {
        "BriefDescription": "Number of PREFETCHT1 or PREFETCHT2 instructions executed.",
        "Counter": "0,1,2,3",
        "CounterHTOff": "0,1,2,3,4,5,6,7",
        "EventCode": "0x32",
        "EventName": "SW_PREFETCH_ACCESS.T1_T2",
        "SampleAfterValue": "2000003",
        "UMask": "0x4"
    }
]