ARM/ixp4xx: Make NEED_MACH_IO_H optional
In order to create a proper PCI driver for the IXP4xx
we need to make the old PCI driver and its reliance
on <mach/io.h> optional.
Create a new Kconfig symbol for the legacy PCI driver
IXP4XX_PCI_LEGACY and only activate NEED_MACH_IO_H
for this driver.
A few files need to be adjusted to explicitly include
the <mach/hardware.h> and <mach/cpu.h> headers that
they previously obtained implicitly using <linux/io.h>
that would include <mach/io.h> and in turn include
these two headers.
This breaks our reliance on the old PCI and indirect
PCI support so we can reimplement a proper purely
DT-based driver in the PCI subsystem.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Krzysztof Halasa <khalasa@piap.pl>
Cc: Zoltan HERPAI <wigyori@uid0.hu>
Cc: Raylynn Knight <rayknight@me.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 24804f1..819f0d0 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -398,7 +398,8 @@
select HAVE_PCI
select IXP4XX_IRQ
select IXP4XX_TIMER
- select NEED_MACH_IO_H
+ # With the new PCI driver this is not needed
+ select NEED_MACH_IO_H if PCI_IXP4XX_LEGACY
select USB_EHCI_BIG_ENDIAN_DESC
select USB_EHCI_BIG_ENDIAN_MMIO
help
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 165c184..cabb372 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -20,7 +20,7 @@
config MACH_NSLU2
bool
prompt "Linksys NSLU2"
- select FORCE_PCI
+ depends on IXP4XX_PCI_LEGACY
help
Say 'Y' here if you want your kernel to support Linksys's
NSLU2 NAS device. For more information on this platform,
@@ -28,7 +28,7 @@
config MACH_AVILA
bool "Avila"
- select FORCE_PCI
+ depends on IXP4XX_PCI_LEGACY
help
Say 'Y' here if you want your kernel to support the Gateworks
Avila Network Platform. For more information on this platform,
@@ -44,7 +44,7 @@
config ARCH_ADI_COYOTE
bool "Coyote"
- select FORCE_PCI
+ depends on IXP4XX_PCI_LEGACY
help
Say 'Y' here if you want your kernel to support the ADI
Engineering Coyote Gateway Reference Platform. For more
@@ -52,7 +52,7 @@
config MACH_GATEWAY7001
bool "Gateway 7001"
- select FORCE_PCI
+ depends on IXP4XX_PCI_LEGACY
help
Say 'Y' here if you want your kernel to support Gateway's
7001 Access Point. For more information on this platform,
@@ -60,7 +60,7 @@
config MACH_WG302V2
bool "Netgear WG302 v2 / WAG302 v2"
- select FORCE_PCI
+ depends on IXP4XX_PCI_LEGACY
help
Say 'Y' here if you want your kernel to support Netgear's
WG302 v2 or WAG302 v2 Access Points. For more information
@@ -68,6 +68,7 @@
config ARCH_IXDP425
bool "IXDP425"
+ depends on IXP4XX_PCI_LEGACY
help
Say 'Y' here if you want your kernel to support Intel's
IXDP425 Development Platform (Also known as Richfield).
@@ -75,6 +76,7 @@
config MACH_IXDPG425
bool "IXDPG425"
+ depends on IXP4XX_PCI_LEGACY
help
Say 'Y' here if you want your kernel to support Intel's
IXDPG425 Development Platform (Also known as Montajade).
@@ -120,7 +122,7 @@
config MACH_NAS100D
bool
prompt "NAS100D"
- select FORCE_PCI
+ depends on IXP4XX_PCI_LEGACY
help
Say 'Y' here if you want your kernel to support Iomega's
NAS 100d device. For more information on this platform,
@@ -129,7 +131,7 @@
config MACH_DSMG600
bool
prompt "D-Link DSM-G600 RevA"
- select FORCE_PCI
+ depends on IXP4XX_PCI_LEGACY
help
Say 'Y' here if you want your kernel to support D-Link's
DSM-G600 RevA device. For more information on this platform,
@@ -143,7 +145,7 @@
config MACH_FSG
bool
prompt "Freecom FSG-3"
- select FORCE_PCI
+ depends on IXP4XX_PCI_LEGACY
help
Say 'Y' here if you want your kernel to support Freecom's
FSG-3 device. For more information on this platform,
@@ -152,7 +154,7 @@
config MACH_ARCOM_VULCAN
bool
prompt "Arcom/Eurotech Vulcan"
- select FORCE_PCI
+ depends on IXP4XX_PCI_LEGACY
help
Say 'Y' here if you want your kernel to support Arcom's
Vulcan board.
@@ -173,7 +175,7 @@
config MACH_GTWX5715
bool "Gemtek WX5715 (Linksys WRV54G)"
depends on ARCH_IXP4XX
- select FORCE_PCI
+ depends on IXP4XX_PCI_LEGACY
help
This board is currently inside the Linksys WRV54G Gateways.
@@ -196,7 +198,7 @@
config MACH_MICCPT
bool "Omicron MICCPT"
- select FORCE_PCI
+ depends on IXP4XX_PCI_LEGACY
help
Say 'Y' here if you want your kernel to support the MICCPT
board from OMICRON electronics GmbH.
@@ -209,9 +211,16 @@
comment "IXP4xx Options"
+config IXP4XX_PCI_LEGACY
+ bool "IXP4xx legacy PCI driver support"
+ depends on PCI
+ help
+ Selects legacy PCI driver.
+ Not recommended for new development.
+
config IXP4XX_INDIRECT_PCI
bool "Use indirect PCI memory access"
- depends on PCI
+ depends on IXP4XX_PCI_LEGACY
help
IXP4xx provides two methods of accessing PCI memory space:
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 000f672..431da1b 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -32,7 +32,6 @@
#include <linux/dma-map-ops.h>
#include <mach/udc.h>
#include <mach/hardware.h>
-#include <mach/io.h>
#include <linux/uaccess.h>
#include <asm/page.h>
#include <asm/exception.h>
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index 507ee38..844329c 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -28,6 +28,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
+#include <mach/hardware.h>
#include "irqs.h"
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index 6959ad2..6133cf0 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -33,6 +33,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
+#include <mach/hardware.h>
#include "irqs.h"
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index a428bb9..8526a70 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -31,6 +31,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/time.h>
+#include <mach/hardware.h>
#include "irqs.h"
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index 43215a4..073c4e2 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -18,6 +18,7 @@
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <scsi/scsi_host.h>
+#include <mach/hardware.h>
#define DRV_NAME "pata_ixp4xx_cf"
#define DRV_VERSION "0.2"
diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c
index cb89323..3624d92 100644
--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
@@ -37,6 +37,7 @@
#include <linux/module.h>
#include <linux/soc/ixp4xx/npe.h>
#include <linux/soc/ixp4xx/qmgr.h>
+#include <mach/hardware.h>
#include "ixp46x_ts.h"
diff --git a/drivers/soc/ixp4xx/ixp4xx-npe.c b/drivers/soc/ixp4xx/ixp4xx-npe.c
index ec90b44..0a16ac4 100644
--- a/drivers/soc/ixp4xx/ixp4xx-npe.c
+++ b/drivers/soc/ixp4xx/ixp4xx-npe.c
@@ -20,6 +20,8 @@
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/soc/ixp4xx/npe.h>
+#include <mach/hardware.h>
+#include <mach/cpu.h>
#define DEBUG_MSG 0
#define DEBUG_FW 0
diff --git a/drivers/soc/ixp4xx/ixp4xx-qmgr.c b/drivers/soc/ixp4xx/ixp4xx-qmgr.c
index 8c96838..1b1631a 100644
--- a/drivers/soc/ixp4xx/ixp4xx-qmgr.c
+++ b/drivers/soc/ixp4xx/ixp4xx-qmgr.c
@@ -12,6 +12,8 @@
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/soc/ixp4xx/qmgr.h>
+#include <mach/hardware.h>
+#include <mach/cpu.h>
static struct qmgr_regs __iomem *qmgr_regs;
static int qmgr_irq_1;
