Merge remote-tracking branch 'gpio/ib-aspeed' into upstream-ready
Merge the GPIO tree "ib-aspeed" topic branch which contains pre-requisites
for subsequent changes. This branch is also in gpio "next".
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
index 389f5f83..0b9b37d 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
@@ -52,6 +52,7 @@
compatible = "fsi-master-gpio", "fsi-master";
#address-cells = <2>;
#size-cells = <0>;
+ no-gpio-delays;
clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
index 78a511e..6560361 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
@@ -153,6 +153,7 @@
compatible = "fsi-master-gpio", "fsi-master";
#address-cells = <2>;
#size-cells = <0>;
+ no-gpio-delays;
clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
data-gpios = <&gpio ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
index ccbf645..2c5aa90 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
@@ -91,6 +91,7 @@
compatible = "fsi-master-gpio", "fsi-master";
#address-cells = <2>;
#size-cells = <0>;
+ no-gpio-delays;
trans-gpios = <&gpio ASPEED_GPIO(O, 6) GPIO_ACTIVE_HIGH>;
enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
diff --git a/drivers/fsi/Kconfig b/drivers/fsi/Kconfig
index a326ed6..9c08f46 100644
--- a/drivers/fsi/Kconfig
+++ b/drivers/fsi/Kconfig
@@ -32,4 +32,12 @@
---help---
This option enables an FSI based SCOM device driver.
+config FSI_SBEFIFO
+ tristate "SBEFIFO FSI client device driver"
+ depends on OF_ADDRESS
+ ---help---
+ This option enables an FSI based SBEFIFO device driver. The SBEFIFO is
+ a pipe-like FSI device for communicating with the self boot engine
+ (SBE) on POWER processors.
+
endif
diff --git a/drivers/fsi/Makefile b/drivers/fsi/Makefile
index 65eb99d..851182e 100644
--- a/drivers/fsi/Makefile
+++ b/drivers/fsi/Makefile
@@ -3,3 +3,4 @@
obj-$(CONFIG_FSI_MASTER_HUB) += fsi-master-hub.o
obj-$(CONFIG_FSI_MASTER_GPIO) += fsi-master-gpio.o
obj-$(CONFIG_FSI_SCOM) += fsi-scom.o
+obj-$(CONFIG_FSI_SBEFIFO) += fsi-sbefifo.o
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index 4c03d69..e9f8813 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -81,6 +81,8 @@ struct fsi_slave {
int id;
int link;
uint32_t size; /* size of slave address space */
+ u8 t_send_delay;
+ u8 t_echo_delay;
};
#define to_fsi_master(d) container_of(d, struct fsi_master, dev)
@@ -190,7 +192,7 @@ static int fsi_slave_calc_addr(struct fsi_slave *slave, uint32_t *addrp,
static int fsi_slave_report_and_clear_errors(struct fsi_slave *slave)
{
struct fsi_master *master = slave->master;
- uint32_t irq, stat;
+ __be32 irq, stat;
int rc, link;
uint8_t id;
@@ -215,7 +217,53 @@ static int fsi_slave_report_and_clear_errors(struct fsi_slave *slave)
&irq, sizeof(irq));
}
-static int fsi_slave_set_smode(struct fsi_master *master, int link, int id);
+/* Encode slave local bus echo delay */
+static inline uint32_t fsi_smode_echodly(int x)
+{
+ return (x & FSI_SMODE_ED_MASK) << FSI_SMODE_ED_SHIFT;
+}
+
+/* Encode slave local bus send delay */
+static inline uint32_t fsi_smode_senddly(int x)
+{
+ return (x & FSI_SMODE_SD_MASK) << FSI_SMODE_SD_SHIFT;
+}
+
+/* Encode slave local bus clock rate ratio */
+static inline uint32_t fsi_smode_lbcrr(int x)
+{
+ return (x & FSI_SMODE_LBCRR_MASK) << FSI_SMODE_LBCRR_SHIFT;
+}
+
+/* Encode slave ID */
+static inline uint32_t fsi_smode_sid(int x)
+{
+ return (x & FSI_SMODE_SID_MASK) << FSI_SMODE_SID_SHIFT;
+}
+
+static uint32_t fsi_slave_smode(int id, u8 t_senddly, u8 t_echodly)
+{
+ return FSI_SMODE_WSC | FSI_SMODE_ECRC
+ | fsi_smode_sid(id)
+ | fsi_smode_echodly(t_echodly - 1) | fsi_smode_senddly(t_senddly - 1)
+ | fsi_smode_lbcrr(0x8);
+}
+
+static int fsi_slave_set_smode(struct fsi_slave *slave)
+{
+ uint32_t smode;
+ __be32 data;
+
+ /* set our smode register with the slave ID field to 0; this enables
+ * extended slave addressing
+ */
+ smode = fsi_slave_smode(slave->id, slave->t_send_delay, slave->t_echo_delay);
+ data = cpu_to_be32(smode);
+
+ return fsi_master_write(slave->master, slave->link, slave->id,
+ FSI_SLAVE_BASE + FSI_SMODE,
+ &data, sizeof(data));
+}
static int fsi_slave_handle_error(struct fsi_slave *slave, bool write,
uint32_t addr, size_t size)
@@ -223,7 +271,7 @@ static int fsi_slave_handle_error(struct fsi_slave *slave, bool write,
struct fsi_master *master = slave->master;
int rc, link;
uint32_t reg;
- uint8_t id;
+ uint8_t id, send_delay, echo_delay;
if (discard_errors)
return -1;
@@ -254,15 +302,26 @@ static int fsi_slave_handle_error(struct fsi_slave *slave, bool write,
}
}
+ send_delay = slave->t_send_delay;
+ echo_delay = slave->t_echo_delay;
+
/* getting serious, reset the slave via BREAK */
rc = fsi_master_break(master, link);
if (rc)
return rc;
- rc = fsi_slave_set_smode(master, link, id);
+ slave->t_send_delay = send_delay;
+ slave->t_echo_delay = echo_delay;
+
+ rc = fsi_slave_set_smode(slave);
if (rc)
return rc;
+ if (master->link_config)
+ master->link_config(master, link,
+ slave->t_send_delay,
+ slave->t_echo_delay);
+
return fsi_slave_report_and_clear_errors(slave);
}
@@ -390,7 +449,6 @@ static struct device_node *fsi_device_find_of_node(struct fsi_device *dev)
static int fsi_slave_scan(struct fsi_slave *slave)
{
uint32_t engine_addr;
- uint32_t conf;
int rc, i;
/*
@@ -404,15 +462,17 @@ static int fsi_slave_scan(struct fsi_slave *slave)
for (i = 2; i < engine_page_size / sizeof(uint32_t); i++) {
uint8_t slots, version, type, crc;
struct fsi_device *dev;
+ uint32_t conf;
+ __be32 data;
- rc = fsi_slave_read(slave, (i + 1) * sizeof(conf),
- &conf, sizeof(conf));
+ rc = fsi_slave_read(slave, (i + 1) * sizeof(data),
+ &data, sizeof(data));
if (rc) {
dev_warn(&slave->dev,
"error reading slave registers\n");
return -1;
}
- conf = be32_to_cpu(conf);
+ conf = be32_to_cpu(data);
crc = crc4(0, conf, 32);
if (crc) {
@@ -562,52 +622,6 @@ static const struct bin_attribute fsi_slave_term_attr = {
.write = fsi_slave_sysfs_term_write,
};
-/* Encode slave local bus echo delay */
-static inline uint32_t fsi_smode_echodly(int x)
-{
- return (x & FSI_SMODE_ED_MASK) << FSI_SMODE_ED_SHIFT;
-}
-
-/* Encode slave local bus send delay */
-static inline uint32_t fsi_smode_senddly(int x)
-{
- return (x & FSI_SMODE_SD_MASK) << FSI_SMODE_SD_SHIFT;
-}
-
-/* Encode slave local bus clock rate ratio */
-static inline uint32_t fsi_smode_lbcrr(int x)
-{
- return (x & FSI_SMODE_LBCRR_MASK) << FSI_SMODE_LBCRR_SHIFT;
-}
-
-/* Encode slave ID */
-static inline uint32_t fsi_smode_sid(int x)
-{
- return (x & FSI_SMODE_SID_MASK) << FSI_SMODE_SID_SHIFT;
-}
-
-static uint32_t fsi_slave_smode(int id)
-{
- return FSI_SMODE_WSC | FSI_SMODE_ECRC
- | fsi_smode_sid(id)
- | fsi_smode_echodly(0xf) | fsi_smode_senddly(0xf)
- | fsi_smode_lbcrr(0x8);
-}
-
-static int fsi_slave_set_smode(struct fsi_master *master, int link, int id)
-{
- uint32_t smode;
-
- /* set our smode register with the slave ID field to 0; this enables
- * extended slave addressing
- */
- smode = fsi_slave_smode(id);
- smode = cpu_to_be32(smode);
-
- return fsi_master_write(master, link, id, FSI_SLAVE_BASE + FSI_SMODE,
- &smode, sizeof(smode));
-}
-
static void fsi_slave_release(struct device *dev)
{
struct fsi_slave *slave = to_fsi_slave(dev);
@@ -659,11 +673,56 @@ static struct device_node *fsi_slave_find_of_node(struct fsi_master *master,
return NULL;
}
+static ssize_t slave_send_echo_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct fsi_slave *slave = to_fsi_slave(dev);
+
+ return sprintf(buf, "%u\n", slave->t_send_delay);
+}
+
+static ssize_t slave_send_echo_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct fsi_slave *slave = to_fsi_slave(dev);
+ struct fsi_master *master = slave->master;
+ unsigned long val;
+ int rc;
+
+ if (kstrtoul(buf, 0, &val) < 0)
+ return -EINVAL;
+
+ if (val < 1 || val > 16)
+ return -EINVAL;
+
+ if (!master->link_config)
+ return -ENXIO;
+
+ /* Current HW mandates that send and echo delay are identical */
+ slave->t_send_delay = val;
+ slave->t_echo_delay = val;
+
+ rc = fsi_slave_set_smode(slave);
+ if (rc < 0)
+ return rc;
+ if (master->link_config)
+ master->link_config(master, slave->link,
+ slave->t_send_delay,
+ slave->t_echo_delay);
+
+ return count;
+}
+
+static DEVICE_ATTR(send_echo_delays, 0600,
+ slave_send_echo_show, slave_send_echo_store);
+
static int fsi_slave_init(struct fsi_master *master, int link, uint8_t id)
{
- uint32_t chip_id, llmode;
+ uint32_t chip_id;
struct fsi_slave *slave;
uint8_t crc;
+ __be32 data, llmode;
int rc;
/* Currently, we only support single slaves on a link, and use the
@@ -672,13 +731,13 @@ static int fsi_slave_init(struct fsi_master *master, int link, uint8_t id)
if (id != 0)
return -EINVAL;
- rc = fsi_master_read(master, link, id, 0, &chip_id, sizeof(chip_id));
+ rc = fsi_master_read(master, link, id, 0, &data, sizeof(data));
if (rc) {
dev_dbg(&master->dev, "can't read slave %02x:%02x %d\n",
link, id, rc);
return -ENODEV;
}
- chip_id = be32_to_cpu(chip_id);
+ chip_id = be32_to_cpu(data);
crc = crc4(0, chip_id, 32);
if (crc) {
@@ -690,14 +749,6 @@ static int fsi_slave_init(struct fsi_master *master, int link, uint8_t id)
dev_dbg(&master->dev, "fsi: found chip %08x at %02x:%02x:%02x\n",
chip_id, master->idx, link, id);
- rc = fsi_slave_set_smode(master, link, id);
- if (rc) {
- dev_warn(&master->dev,
- "can't set smode on slave:%02x:%02x %d\n",
- link, id, rc);
- return -ENODEV;
- }
-
/* If we're behind a master that doesn't provide a self-running bus
* clock, put the slave into async mode
*/
@@ -726,6 +777,21 @@ static int fsi_slave_init(struct fsi_master *master, int link, uint8_t id)
slave->link = link;
slave->id = id;
slave->size = FSI_SLAVE_SIZE_23b;
+ slave->t_send_delay = 16;
+ slave->t_echo_delay = 16;
+
+ rc = fsi_slave_set_smode(slave);
+ if (rc) {
+ dev_warn(&master->dev,
+ "can't set smode on slave:%02x:%02x %d\n",
+ link, id, rc);
+ kfree(slave);
+ return -ENODEV;
+ }
+ if (master->link_config)
+ master->link_config(master, link,
+ slave->t_send_delay,
+ slave->t_echo_delay);
dev_set_name(&slave->dev, "slave@%02x:%02x", link, id);
rc = device_register(&slave->dev);
@@ -744,6 +810,10 @@ static int fsi_slave_init(struct fsi_master *master, int link, uint8_t id)
if (rc)
dev_warn(&slave->dev, "failed to create term attr: %d\n", rc);
+ rc = device_create_file(&slave->dev, &dev_attr_send_echo_delays);
+ if (rc)
+ dev_warn(&slave->dev, "failed to create delay attr: %d\n", rc);
+
rc = fsi_slave_scan(slave);
if (rc)
dev_dbg(&master->dev, "failed during slave scan with: %d\n",
@@ -814,12 +884,16 @@ static int fsi_master_link_enable(struct fsi_master *master, int link)
*/
static int fsi_master_break(struct fsi_master *master, int link)
{
+ int rc = 0;
+
trace_fsi_master_break(master, link);
if (master->send_break)
- return master->send_break(master, link);
+ rc = master->send_break(master, link);
+ if (master->link_config)
+ master->link_config(master, link, 16, 16);
- return 0;
+ return rc;
}
static int fsi_master_scan(struct fsi_master *master)
@@ -903,9 +977,6 @@ int fsi_master_register(struct fsi_master *master)
int rc;
struct device_node *np;
- if (!master)
- return -EINVAL;
-
master->idx = ida_simple_get(&master_ida, 0, INT_MAX, GFP_KERNEL);
dev_set_name(&master->dev, "fsi%d", master->idx);
@@ -917,14 +988,14 @@ int fsi_master_register(struct fsi_master *master)
rc = device_create_file(&master->dev, &dev_attr_rescan);
if (rc) {
- device_unregister(&master->dev);
+ device_del(&master->dev);
ida_simple_remove(&master_ida, master->idx);
return rc;
}
rc = device_create_file(&master->dev, &dev_attr_break);
if (rc) {
- device_unregister(&master->dev);
+ device_del(&master->dev);
ida_simple_remove(&master_ida, master->idx);
return rc;
}
diff --git a/drivers/fsi/fsi-master-gpio.c b/drivers/fsi/fsi-master-gpio.c
index 3f487449..4eb3a76 100644
--- a/drivers/fsi/fsi-master-gpio.c
+++ b/drivers/fsi/fsi-master-gpio.c
@@ -8,59 +8,31 @@
#include <linux/fsi.h>
#include <linux/gpio/consumer.h>
#include <linux/io.h>
+#include <linux/irqflags.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
-#include <linux/spinlock.h>
#include "fsi-master.h"
#define FSI_GPIO_STD_DLY 1 /* Standard pin delay in nS */
-#define FSI_ECHO_DELAY_CLOCKS 16 /* Number clocks for echo delay */
-#define FSI_PRE_BREAK_CLOCKS 50 /* Number clocks to prep for break */
-#define FSI_BREAK_CLOCKS 256 /* Number of clocks to issue break */
-#define FSI_POST_BREAK_CLOCKS 16000 /* Number clocks to set up cfam */
-#define FSI_INIT_CLOCKS 5000 /* Clock out any old data */
-#define FSI_GPIO_STD_DELAY 10 /* Standard GPIO delay in nS */
- /* todo: adjust down as low as */
- /* possible or eliminate */
-#define FSI_GPIO_CMD_DPOLL 0x2
-#define FSI_GPIO_CMD_TERM 0x3f
-#define FSI_GPIO_CMD_ABS_AR 0x4
-
-#define FSI_GPIO_DPOLL_CLOCKS 100 /* < 21 will cause slave to hang */
-
-/* Bus errors */
-#define FSI_GPIO_ERR_BUSY 1 /* Slave stuck in busy state */
-#define FSI_GPIO_RESP_ERRA 2 /* Any (misc) Error */
-#define FSI_GPIO_RESP_ERRC 3 /* Slave reports master CRC error */
-#define FSI_GPIO_MTOE 4 /* Master time out error */
-#define FSI_GPIO_CRC_INVAL 5 /* Master reports slave CRC error */
-
-/* Normal slave responses */
-#define FSI_GPIO_RESP_BUSY 1
-#define FSI_GPIO_RESP_ACK 0
-#define FSI_GPIO_RESP_ACKD 4
-
-#define FSI_GPIO_MAX_BUSY 100
-#define FSI_GPIO_MTOE_COUNT 1000
-#define FSI_GPIO_DRAIN_BITS 20
-#define FSI_GPIO_CRC_SIZE 4
-#define FSI_GPIO_MSG_ID_SIZE 2
-#define FSI_GPIO_MSG_RESPID_SIZE 2
-#define FSI_GPIO_PRIME_SLAVE_CLOCKS 100
+#define LAST_ADDR_INVALID 0x1
struct fsi_master_gpio {
struct fsi_master master;
struct device *dev;
- spinlock_t cmd_lock; /* Lock for commands */
+ struct mutex cmd_lock; /* mutex for command ordering */
struct gpio_desc *gpio_clk;
struct gpio_desc *gpio_data;
struct gpio_desc *gpio_trans; /* Voltage translator */
struct gpio_desc *gpio_enable; /* FSI enable */
struct gpio_desc *gpio_mux; /* Mux control */
bool external_mode;
+ bool no_delays;
+ uint32_t last_addr;
+ uint8_t t_send_delay;
+ uint8_t t_echo_delay;
};
#define CREATE_TRACE_POINTS
@@ -78,19 +50,31 @@ static void clock_toggle(struct fsi_master_gpio *master, int count)
int i;
for (i = 0; i < count; i++) {
- ndelay(FSI_GPIO_STD_DLY);
+ if (!master->no_delays)
+ ndelay(FSI_GPIO_STD_DLY);
gpiod_set_value(master->gpio_clk, 0);
- ndelay(FSI_GPIO_STD_DLY);
+ if (!master->no_delays)
+ ndelay(FSI_GPIO_STD_DLY);
gpiod_set_value(master->gpio_clk, 1);
}
}
-static int sda_in(struct fsi_master_gpio *master)
+static int sda_clock_in(struct fsi_master_gpio *master)
{
int in;
- ndelay(FSI_GPIO_STD_DLY);
+ if (!master->no_delays)
+ ndelay(FSI_GPIO_STD_DLY);
+ gpiod_set_value(master->gpio_clk, 0);
+
+ /* Dummy read to feed the synchronizers */
+ gpiod_get_value(master->gpio_data);
+
+ /* Actual data read */
in = gpiod_get_value(master->gpio_data);
+ if (!master->no_delays)
+ ndelay(FSI_GPIO_STD_DLY);
+ gpiod_set_value(master->gpio_clk, 1);
return in ? 1 : 0;
}
@@ -113,10 +97,17 @@ static void set_sda_output(struct fsi_master_gpio *master, int value)
static void clock_zeros(struct fsi_master_gpio *master, int count)
{
+ trace_fsi_master_gpio_clock_zeros(master, count);
set_sda_output(master, 1);
clock_toggle(master, count);
}
+static void echo_delay(struct fsi_master_gpio *master)
+{
+ clock_zeros(master, master->t_echo_delay);
+}
+
+
static void serial_in(struct fsi_master_gpio *master, struct fsi_gpio_msg *msg,
uint8_t num_bits)
{
@@ -125,8 +116,7 @@ static void serial_in(struct fsi_master_gpio *master, struct fsi_gpio_msg *msg,
set_sda_input(master);
for (bit = 0; bit < num_bits; bit++) {
- clock_toggle(master, 1);
- in_bit = sda_in(master);
+ in_bit = sda_clock_in(master);
msg->msg <<= 1;
msg->msg |= ~in_bit & 0x1; /* Data is active low */
}
@@ -191,22 +181,92 @@ static void msg_push_crc(struct fsi_gpio_msg *msg)
msg_push_bits(msg, crc, 4);
}
-/*
- * Encode an Absolute Address command
- */
-static void build_abs_ar_command(struct fsi_gpio_msg *cmd,
- uint8_t id, uint32_t addr, size_t size, const void *data)
+static bool check_same_address(struct fsi_master_gpio *master, int id,
+ uint32_t addr)
{
+ /* this will also handle LAST_ADDR_INVALID */
+ return master->last_addr == (((id & 0x3) << 21) | (addr & ~0x3));
+}
+
+static bool check_relative_address(struct fsi_master_gpio *master, int id,
+ uint32_t addr, uint32_t *rel_addrp)
+{
+ uint32_t last_addr = master->last_addr;
+ int32_t rel_addr;
+
+ if (last_addr == LAST_ADDR_INVALID)
+ return false;
+
+ /* We may be in 23-bit addressing mode, which uses the id as the
+ * top two address bits. So, if we're referencing a different ID,
+ * use absolute addresses.
+ */
+ if (((last_addr >> 21) & 0x3) != id)
+ return false;
+
+ /* remove the top two bits from any 23-bit addressing */
+ last_addr &= (1 << 21) - 1;
+
+ /* We know that the addresses are limited to 21 bits, so this won't
+ * overflow the signed rel_addr */
+ rel_addr = addr - last_addr;
+ if (rel_addr > 255 || rel_addr < -256)
+ return false;
+
+ *rel_addrp = (uint32_t)rel_addr;
+
+ return true;
+}
+
+static void last_address_update(struct fsi_master_gpio *master,
+ int id, bool valid, uint32_t addr)
+{
+ if (!valid)
+ master->last_addr = LAST_ADDR_INVALID;
+ else
+ master->last_addr = ((id & 0x3) << 21) | (addr & ~0x3);
+}
+
+/*
+ * Encode an Absolute/Relative/Same Address command
+ */
+static void build_ar_command(struct fsi_master_gpio *master,
+ struct fsi_gpio_msg *cmd, uint8_t id,
+ uint32_t addr, size_t size, const void *data)
+{
+ int i, addr_bits, opcode_bits;
bool write = !!data;
- uint8_t ds;
- int i;
+ uint8_t ds, opcode;
+ uint32_t rel_addr;
cmd->bits = 0;
cmd->msg = 0;
- msg_push_bits(cmd, id, 2);
- msg_push_bits(cmd, FSI_GPIO_CMD_ABS_AR, 3);
- msg_push_bits(cmd, write ? 0 : 1, 1);
+ /* we have 21 bits of address max */
+ addr &= ((1 << 21) - 1);
+
+ /* cmd opcodes are variable length - SAME_AR is only two bits */
+ opcode_bits = 3;
+
+ if (check_same_address(master, id, addr)) {
+ /* we still address the byte offset within the word */
+ addr_bits = 2;
+ opcode_bits = 2;
+ opcode = FSI_CMD_SAME_AR;
+ trace_fsi_master_gpio_cmd_same_addr(master);
+
+ } else if (check_relative_address(master, id, addr, &rel_addr)) {
+ /* 8 bits plus sign */
+ addr_bits = 9;
+ addr = rel_addr;
+ opcode = FSI_CMD_REL_AR;
+ trace_fsi_master_gpio_cmd_rel_addr(master, rel_addr);
+
+ } else {
+ addr_bits = 21;
+ opcode = FSI_CMD_ABS_AR;
+ trace_fsi_master_gpio_cmd_abs_addr(master, addr);
+ }
/*
* The read/write size is encoded in the lower bits of the address
@@ -223,7 +283,10 @@ static void build_abs_ar_command(struct fsi_gpio_msg *cmd,
if (size == 4)
addr |= 1;
- msg_push_bits(cmd, addr & ((1 << 21) - 1), 21);
+ msg_push_bits(cmd, id, 2);
+ msg_push_bits(cmd, opcode, opcode_bits);
+ msg_push_bits(cmd, write ? 0 : 1, 1);
+ msg_push_bits(cmd, addr, addr_bits);
msg_push_bits(cmd, ds, 1);
for (i = 0; write && i < size; i++)
msg_push_bits(cmd, ((uint8_t *)data)[i], 8);
@@ -237,14 +300,18 @@ static void build_dpoll_command(struct fsi_gpio_msg *cmd, uint8_t slave_id)
cmd->msg = 0;
msg_push_bits(cmd, slave_id, 2);
- msg_push_bits(cmd, FSI_GPIO_CMD_DPOLL, 3);
+ msg_push_bits(cmd, FSI_CMD_DPOLL, 3);
msg_push_crc(cmd);
}
-static void echo_delay(struct fsi_master_gpio *master)
+static void build_epoll_command(struct fsi_gpio_msg *cmd, uint8_t slave_id)
{
- set_sda_output(master, 1);
- clock_toggle(master, FSI_ECHO_DELAY_CLOCKS);
+ cmd->bits = 0;
+ cmd->msg = 0;
+
+ msg_push_bits(cmd, slave_id, 2);
+ msg_push_bits(cmd, FSI_CMD_EPOLL, 3);
+ msg_push_crc(cmd);
}
static void build_term_command(struct fsi_gpio_msg *cmd, uint8_t slave_id)
@@ -253,40 +320,40 @@ static void build_term_command(struct fsi_gpio_msg *cmd, uint8_t slave_id)
cmd->msg = 0;
msg_push_bits(cmd, slave_id, 2);
- msg_push_bits(cmd, FSI_GPIO_CMD_TERM, 6);
+ msg_push_bits(cmd, FSI_CMD_TERM, 6);
msg_push_crc(cmd);
}
/*
- * Store information on master errors so handler can detect and clean
- * up the bus
+ * Note: callers rely specifically on this returning -EAGAIN for
+ * a CRC error detected in the response. Use other error code
+ * for other situations. It will be converted to something else
+ * higher up the stack before it reaches userspace.
*/
-static void fsi_master_gpio_error(struct fsi_master_gpio *master, int error)
-{
-
-}
-
static int read_one_response(struct fsi_master_gpio *master,
uint8_t data_size, struct fsi_gpio_msg *msgp, uint8_t *tagp)
{
struct fsi_gpio_msg msg;
- uint8_t id, tag;
+ unsigned long flags;
uint32_t crc;
+ uint8_t tag;
int i;
+ local_irq_save(flags);
+
/* wait for the start bit */
- for (i = 0; i < FSI_GPIO_MTOE_COUNT; i++) {
+ for (i = 0; i < FSI_MASTER_MTOE_COUNT; i++) {
msg.bits = 0;
msg.msg = 0;
serial_in(master, &msg, 1);
if (msg.msg)
break;
}
- if (i == FSI_GPIO_MTOE_COUNT) {
+ if (i == FSI_MASTER_MTOE_COUNT) {
dev_dbg(master->dev,
"Master time out waiting for response\n");
- fsi_master_gpio_error(master, FSI_GPIO_MTOE);
- return -EIO;
+ local_irq_restore(flags);
+ return -ETIMEDOUT;
}
msg.bits = 0;
@@ -295,23 +362,27 @@ static int read_one_response(struct fsi_master_gpio *master,
/* Read slave ID & response tag */
serial_in(master, &msg, 4);
- id = (msg.msg >> FSI_GPIO_MSG_RESPID_SIZE) & 0x3;
tag = msg.msg & 0x3;
/* If we have an ACK and we're expecting data, clock the data in too */
- if (tag == FSI_GPIO_RESP_ACK && data_size)
+ if (tag == FSI_RESP_ACK && data_size)
serial_in(master, &msg, data_size * 8);
/* read CRC */
- serial_in(master, &msg, FSI_GPIO_CRC_SIZE);
+ serial_in(master, &msg, FSI_CRC_SIZE);
+
+ local_irq_restore(flags);
/* we have a whole message now; check CRC */
crc = crc4(0, 1, 1);
crc = crc4(crc, msg.msg, msg.bits);
if (crc) {
- dev_dbg(master->dev, "ERR response CRC\n");
- fsi_master_gpio_error(master, FSI_GPIO_CRC_INVAL);
- return -EIO;
+ /* Check if it's all 1's, that probably means the host is off */
+ if (((~msg.msg) & ((1ull << msg.bits) - 1)) == 0)
+ return -ENODEV;
+ dev_dbg(master->dev, "ERR response CRC msg: 0x%016llx (%d bits)\n",
+ msg.msg, msg.bits);
+ return -EAGAIN;
}
if (msgp)
@@ -325,19 +396,23 @@ static int read_one_response(struct fsi_master_gpio *master,
static int issue_term(struct fsi_master_gpio *master, uint8_t slave)
{
struct fsi_gpio_msg cmd;
+ unsigned long flags;
uint8_t tag;
int rc;
build_term_command(&cmd, slave);
+
+ local_irq_save(flags);
serial_out(master, &cmd);
echo_delay(master);
+ local_irq_restore(flags);
rc = read_one_response(master, 0, NULL, &tag);
if (rc < 0) {
dev_err(master->dev,
"TERM failed; lost communication with slave\n");
return -EIO;
- } else if (tag != FSI_GPIO_RESP_ACK) {
+ } else if (tag != FSI_RESP_ACK) {
dev_err(master->dev, "TERM failed; response %d\n", tag);
return -EIO;
}
@@ -350,16 +425,39 @@ static int poll_for_response(struct fsi_master_gpio *master,
{
struct fsi_gpio_msg response, cmd;
int busy_count = 0, rc, i;
+ unsigned long flags;
uint8_t tag;
uint8_t *data_byte = data;
-
+ int crc_err_retries = 0;
retry:
rc = read_one_response(master, size, &response, &tag);
- if (rc)
- return rc;
+
+ /* Handle retries on CRC errors */
+ if (rc == -EAGAIN) {
+ /* Too many retries ? */
+ if (crc_err_retries++ > FSI_CRC_ERR_RETRIES) {
+ /*
+ * Pass it up as a -EIO otherwise upper level will retry
+ * the whole command which isn't what we want here.
+ */
+ rc = -EIO;
+ goto fail;
+ }
+ dev_dbg(master->dev,
+ "CRC error retry %d\n", crc_err_retries);
+ trace_fsi_master_gpio_crc_rsp_error(master);
+ build_epoll_command(&cmd, slave);
+ local_irq_save(flags);
+ clock_zeros(master, FSI_MASTER_EPOLL_CLOCKS);
+ serial_out(master, &cmd);
+ echo_delay(master);
+ local_irq_restore(flags);
+ goto retry;
+ } else if (rc)
+ goto fail;
switch (tag) {
- case FSI_GPIO_RESP_ACK:
+ case FSI_RESP_ACK:
if (size && data) {
uint64_t val = response.msg;
/* clear crc & mask */
@@ -372,58 +470,90 @@ static int poll_for_response(struct fsi_master_gpio *master,
}
}
break;
- case FSI_GPIO_RESP_BUSY:
+ case FSI_RESP_BUSY:
/*
* Its necessary to clock slave before issuing
* d-poll, not indicated in the hardware protocol
* spec. < 20 clocks causes slave to hang, 21 ok.
*/
- clock_zeros(master, FSI_GPIO_DPOLL_CLOCKS);
- if (busy_count++ < FSI_GPIO_MAX_BUSY) {
+ if (busy_count++ < FSI_MASTER_MAX_BUSY) {
build_dpoll_command(&cmd, slave);
+ local_irq_save(flags);
+ clock_zeros(master, FSI_MASTER_DPOLL_CLOCKS);
serial_out(master, &cmd);
echo_delay(master);
+ local_irq_restore(flags);
goto retry;
}
dev_warn(master->dev,
"ERR slave is stuck in busy state, issuing TERM\n");
+ local_irq_save(flags);
+ clock_zeros(master, FSI_MASTER_DPOLL_CLOCKS);
+ local_irq_restore(flags);
issue_term(master, slave);
rc = -EIO;
break;
- case FSI_GPIO_RESP_ERRA:
- case FSI_GPIO_RESP_ERRC:
- dev_dbg(master->dev, "ERR%c received: 0x%x\n",
- tag == FSI_GPIO_RESP_ERRA ? 'A' : 'C',
- (int)response.msg);
- fsi_master_gpio_error(master, response.msg);
+ case FSI_RESP_ERRA:
+ dev_dbg(master->dev, "ERRA received: 0x%x\n", (int)response.msg);
rc = -EIO;
break;
+ case FSI_RESP_ERRC:
+ dev_dbg(master->dev, "ERRC received: 0x%x\n", (int)response.msg);
+ trace_fsi_master_gpio_crc_cmd_error(master);
+ rc = -EAGAIN;
+ break;
}
- /* Clock the slave enough to be ready for next operation */
- clock_zeros(master, FSI_GPIO_PRIME_SLAVE_CLOCKS);
+ if (busy_count > 0)
+ trace_fsi_master_gpio_poll_response_busy(master, busy_count);
+ fail:
+ /*
+ * tSendDelay clocks, avoids signal reflections when switching
+ * from receive of response back to send of data.
+ */
+ local_irq_save(flags);
+ clock_zeros(master, master->t_send_delay);
+ local_irq_restore(flags);
+
return rc;
}
+static int send_request(struct fsi_master_gpio *master,
+ struct fsi_gpio_msg *cmd)
+{
+ unsigned long flags;
+
+ if (master->external_mode)
+ return -EBUSY;
+
+ local_irq_save(flags);
+ serial_out(master, cmd);
+ echo_delay(master);
+ local_irq_restore(flags);
+
+ return 0;
+}
+
static int fsi_master_gpio_xfer(struct fsi_master_gpio *master, uint8_t slave,
struct fsi_gpio_msg *cmd, size_t resp_len, void *resp)
{
- unsigned long flags;
- int rc;
+ int rc = -EAGAIN, retries = 0;
- spin_lock_irqsave(&master->cmd_lock, flags);
+ while ((retries++) < FSI_CRC_ERR_RETRIES) {
+ rc = send_request(master, cmd);
+ if (rc)
+ break;
+ rc = poll_for_response(master, slave, resp_len, resp);
+ if (rc != -EAGAIN)
+ break;
+ rc = -EIO;
+ dev_warn(master->dev, "ECRC retry %d\n", retries);
- if (master->external_mode) {
- spin_unlock_irqrestore(&master->cmd_lock, flags);
- return -EBUSY;
+ /* Pace it a bit before retry */
+ msleep(1);
}
- serial_out(master, cmd);
- echo_delay(master);
- rc = poll_for_response(master, slave, resp_len, resp);
- spin_unlock_irqrestore(&master->cmd_lock, flags);
-
return rc;
}
@@ -432,12 +562,18 @@ static int fsi_master_gpio_read(struct fsi_master *_master, int link,
{
struct fsi_master_gpio *master = to_fsi_master_gpio(_master);
struct fsi_gpio_msg cmd;
+ int rc;
if (link != 0)
return -ENODEV;
- build_abs_ar_command(&cmd, id, addr, size, NULL);
- return fsi_master_gpio_xfer(master, id, &cmd, size, val);
+ mutex_lock(&master->cmd_lock);
+ build_ar_command(master, &cmd, id, addr, size, NULL);
+ rc = fsi_master_gpio_xfer(master, id, &cmd, size, val);
+ last_address_update(master, id, rc == 0, addr);
+ mutex_unlock(&master->cmd_lock);
+
+ return rc;
}
static int fsi_master_gpio_write(struct fsi_master *_master, int link,
@@ -445,12 +581,18 @@ static int fsi_master_gpio_write(struct fsi_master *_master, int link,
{
struct fsi_master_gpio *master = to_fsi_master_gpio(_master);
struct fsi_gpio_msg cmd;
+ int rc;
if (link != 0)
return -ENODEV;
- build_abs_ar_command(&cmd, id, addr, size, val);
- return fsi_master_gpio_xfer(master, id, &cmd, 0, NULL);
+ mutex_lock(&master->cmd_lock);
+ build_ar_command(master, &cmd, id, addr, size, val);
+ rc = fsi_master_gpio_xfer(master, id, &cmd, 0, NULL);
+ last_address_update(master, id, rc == 0, addr);
+ mutex_unlock(&master->cmd_lock);
+
+ return rc;
}
static int fsi_master_gpio_term(struct fsi_master *_master,
@@ -458,12 +600,18 @@ static int fsi_master_gpio_term(struct fsi_master *_master,
{
struct fsi_master_gpio *master = to_fsi_master_gpio(_master);
struct fsi_gpio_msg cmd;
+ int rc;
if (link != 0)
return -ENODEV;
+ mutex_lock(&master->cmd_lock);
build_term_command(&cmd, id);
- return fsi_master_gpio_xfer(master, id, &cmd, 0, NULL);
+ rc = fsi_master_gpio_xfer(master, id, &cmd, 0, NULL);
+ last_address_update(master, id, false, 0);
+ mutex_unlock(&master->cmd_lock);
+
+ return rc;
}
static int fsi_master_gpio_break(struct fsi_master *_master, int link)
@@ -476,11 +624,14 @@ static int fsi_master_gpio_break(struct fsi_master *_master, int link)
trace_fsi_master_gpio_break(master);
- spin_lock_irqsave(&master->cmd_lock, flags);
+ mutex_lock(&master->cmd_lock);
if (master->external_mode) {
- spin_unlock_irqrestore(&master->cmd_lock, flags);
+ mutex_unlock(&master->cmd_lock);
return -EBUSY;
}
+
+ local_irq_save(flags);
+
set_sda_output(master, 1);
sda_out(master, 1);
clock_toggle(master, FSI_PRE_BREAK_CLOCKS);
@@ -489,7 +640,11 @@ static int fsi_master_gpio_break(struct fsi_master *_master, int link)
echo_delay(master);
sda_out(master, 1);
clock_toggle(master, FSI_POST_BREAK_CLOCKS);
- spin_unlock_irqrestore(&master->cmd_lock, flags);
+
+ local_irq_restore(flags);
+
+ last_address_update(master, 0, false, 0);
+ mutex_unlock(&master->cmd_lock);
/* Wait for logic reset to take effect */
udelay(200);
@@ -499,6 +654,8 @@ static int fsi_master_gpio_break(struct fsi_master *_master, int link)
static void fsi_master_gpio_init(struct fsi_master_gpio *master)
{
+ unsigned long flags;
+
gpiod_direction_output(master->gpio_mux, 1);
gpiod_direction_output(master->gpio_trans, 1);
gpiod_direction_output(master->gpio_enable, 1);
@@ -506,7 +663,9 @@ static void fsi_master_gpio_init(struct fsi_master_gpio *master)
gpiod_direction_output(master->gpio_data, 1);
/* todo: evaluate if clocks can be reduced */
+ local_irq_save(flags);
clock_zeros(master, FSI_INIT_CLOCKS);
+ local_irq_restore(flags);
}
static void fsi_master_gpio_init_external(struct fsi_master_gpio *master)
@@ -521,22 +680,37 @@ static void fsi_master_gpio_init_external(struct fsi_master_gpio *master)
static int fsi_master_gpio_link_enable(struct fsi_master *_master, int link)
{
struct fsi_master_gpio *master = to_fsi_master_gpio(_master);
- unsigned long flags;
int rc = -EBUSY;
if (link != 0)
return -ENODEV;
- spin_lock_irqsave(&master->cmd_lock, flags);
+ mutex_lock(&master->cmd_lock);
if (!master->external_mode) {
gpiod_set_value(master->gpio_enable, 1);
rc = 0;
}
- spin_unlock_irqrestore(&master->cmd_lock, flags);
+ mutex_unlock(&master->cmd_lock);
return rc;
}
+static int fsi_master_gpio_link_config(struct fsi_master *_master, int link,
+ u8 t_send_delay, u8 t_echo_delay)
+{
+ struct fsi_master_gpio *master = to_fsi_master_gpio(_master);
+
+ if (link != 0)
+ return -ENODEV;
+
+ mutex_lock(&master->cmd_lock);
+ master->t_send_delay = t_send_delay;
+ master->t_echo_delay = t_echo_delay;
+ mutex_unlock(&master->cmd_lock);
+
+ return 0;
+}
+
static ssize_t external_mode_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -550,7 +724,7 @@ static ssize_t external_mode_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct fsi_master_gpio *master = dev_get_drvdata(dev);
- unsigned long flags, val;
+ unsigned long val;
bool external_mode;
int err;
@@ -560,10 +734,10 @@ static ssize_t external_mode_store(struct device *dev,
external_mode = !!val;
- spin_lock_irqsave(&master->cmd_lock, flags);
+ mutex_lock(&master->cmd_lock);
if (external_mode == master->external_mode) {
- spin_unlock_irqrestore(&master->cmd_lock, flags);
+ mutex_unlock(&master->cmd_lock);
return count;
}
@@ -572,7 +746,8 @@ static ssize_t external_mode_store(struct device *dev,
fsi_master_gpio_init_external(master);
else
fsi_master_gpio_init(master);
- spin_unlock_irqrestore(&master->cmd_lock, flags);
+
+ mutex_unlock(&master->cmd_lock);
fsi_master_rescan(&master->master);
@@ -582,31 +757,44 @@ static ssize_t external_mode_store(struct device *dev,
static DEVICE_ATTR(external_mode, 0664,
external_mode_show, external_mode_store);
+static void fsi_master_gpio_release(struct device *dev)
+{
+ struct fsi_master_gpio *master = to_fsi_master_gpio(dev_to_fsi_master(dev));
+
+ of_node_put(dev_of_node(master->dev));
+
+ kfree(master);
+}
+
static int fsi_master_gpio_probe(struct platform_device *pdev)
{
struct fsi_master_gpio *master;
struct gpio_desc *gpio;
int rc;
- master = devm_kzalloc(&pdev->dev, sizeof(*master), GFP_KERNEL);
+ master = kzalloc(sizeof(*master), GFP_KERNEL);
if (!master)
return -ENOMEM;
master->dev = &pdev->dev;
master->master.dev.parent = master->dev;
master->master.dev.of_node = of_node_get(dev_of_node(master->dev));
+ master->master.dev.release = fsi_master_gpio_release;
+ master->last_addr = LAST_ADDR_INVALID;
gpio = devm_gpiod_get(&pdev->dev, "clock", 0);
if (IS_ERR(gpio)) {
dev_err(&pdev->dev, "failed to get clock gpio\n");
- return PTR_ERR(gpio);
+ rc = PTR_ERR(gpio);
+ goto err_free;
}
master->gpio_clk = gpio;
gpio = devm_gpiod_get(&pdev->dev, "data", 0);
if (IS_ERR(gpio)) {
dev_err(&pdev->dev, "failed to get data gpio\n");
- return PTR_ERR(gpio);
+ rc = PTR_ERR(gpio);
+ goto err_free;
}
master->gpio_data = gpio;
@@ -614,24 +802,38 @@ static int fsi_master_gpio_probe(struct platform_device *pdev)
gpio = devm_gpiod_get_optional(&pdev->dev, "trans", 0);
if (IS_ERR(gpio)) {
dev_err(&pdev->dev, "failed to get trans gpio\n");
- return PTR_ERR(gpio);
+ rc = PTR_ERR(gpio);
+ goto err_free;
}
master->gpio_trans = gpio;
gpio = devm_gpiod_get_optional(&pdev->dev, "enable", 0);
if (IS_ERR(gpio)) {
dev_err(&pdev->dev, "failed to get enable gpio\n");
- return PTR_ERR(gpio);
+ rc = PTR_ERR(gpio);
+ goto err_free;
}
master->gpio_enable = gpio;
gpio = devm_gpiod_get_optional(&pdev->dev, "mux", 0);
if (IS_ERR(gpio)) {
dev_err(&pdev->dev, "failed to get mux gpio\n");
- return PTR_ERR(gpio);
+ rc = PTR_ERR(gpio);
+ goto err_free;
}
master->gpio_mux = gpio;
+ /*
+ * Check if GPIO block is slow enought that no extra delays
+ * are necessary. This improves performance on ast2500 by
+ * an order of magnitude.
+ */
+ master->no_delays = device_property_present(&pdev->dev, "no-gpio-delays");
+
+ /* Default FSI command delays */
+ master->t_send_delay = FSI_SEND_DELAY_CLOCKS;
+ master->t_echo_delay = FSI_ECHO_DELAY_CLOCKS;
+
master->master.n_links = 1;
master->master.flags = FSI_MASTER_FLAG_SWCLOCK;
master->master.read = fsi_master_gpio_read;
@@ -639,34 +841,37 @@ static int fsi_master_gpio_probe(struct platform_device *pdev)
master->master.term = fsi_master_gpio_term;
master->master.send_break = fsi_master_gpio_break;
master->master.link_enable = fsi_master_gpio_link_enable;
+ master->master.link_config = fsi_master_gpio_link_config;
platform_set_drvdata(pdev, master);
- spin_lock_init(&master->cmd_lock);
+ mutex_init(&master->cmd_lock);
fsi_master_gpio_init(master);
rc = device_create_file(&pdev->dev, &dev_attr_external_mode);
if (rc)
- return rc;
+ goto err_free;
- return fsi_master_register(&master->master);
+ rc = fsi_master_register(&master->master);
+ if (rc) {
+ device_remove_file(&pdev->dev, &dev_attr_external_mode);
+ put_device(&master->master.dev);
+ return rc;
+ }
+ return 0;
+ err_free:
+ kfree(master);
+ return rc;
}
+
static int fsi_master_gpio_remove(struct platform_device *pdev)
{
struct fsi_master_gpio *master = platform_get_drvdata(pdev);
- devm_gpiod_put(&pdev->dev, master->gpio_clk);
- devm_gpiod_put(&pdev->dev, master->gpio_data);
- if (master->gpio_trans)
- devm_gpiod_put(&pdev->dev, master->gpio_trans);
- if (master->gpio_enable)
- devm_gpiod_put(&pdev->dev, master->gpio_enable);
- if (master->gpio_mux)
- devm_gpiod_put(&pdev->dev, master->gpio_mux);
- fsi_master_unregister(&master->master);
+ device_remove_file(&pdev->dev, &dev_attr_external_mode);
- of_node_put(master->master.dev.of_node);
+ fsi_master_unregister(&master->master);
return 0;
}
diff --git a/drivers/fsi/fsi-master-hub.c b/drivers/fsi/fsi-master-hub.c
index 5885fc4..b3c1e9d 100644
--- a/drivers/fsi/fsi-master-hub.c
+++ b/drivers/fsi/fsi-master-hub.c
@@ -122,7 +122,8 @@ static int hub_master_write(struct fsi_master *master, int link,
static int hub_master_break(struct fsi_master *master, int link)
{
- uint32_t addr, cmd;
+ uint32_t addr;
+ __be32 cmd;
addr = 0x4;
cmd = cpu_to_be32(0xc0de0000);
@@ -205,7 +206,7 @@ static int hub_master_init(struct fsi_master_hub *hub)
if (rc)
return rc;
- reg = ~0;
+ reg = cpu_to_be32(~0);
rc = fsi_device_write(dev, FSI_MSENP0, ®, sizeof(reg));
if (rc)
return rc;
diff --git a/drivers/fsi/fsi-master.h b/drivers/fsi/fsi-master.h
index ee0b460..f653f75 100644
--- a/drivers/fsi/fsi-master.h
+++ b/drivers/fsi/fsi-master.h
@@ -19,6 +19,39 @@
#include <linux/device.h>
+/* Various protocol delays */
+#define FSI_ECHO_DELAY_CLOCKS 16 /* Number clocks for echo delay */
+#define FSI_SEND_DELAY_CLOCKS 16 /* Number clocks for send delay */
+#define FSI_PRE_BREAK_CLOCKS 50 /* Number clocks to prep for break */
+#define FSI_BREAK_CLOCKS 256 /* Number of clocks to issue break */
+#define FSI_POST_BREAK_CLOCKS 16000 /* Number clocks to set up cfam */
+#define FSI_INIT_CLOCKS 5000 /* Clock out any old data */
+#define FSI_MASTER_DPOLL_CLOCKS 50 /* < 21 will cause slave to hang */
+#define FSI_MASTER_EPOLL_CLOCKS 50 /* Number of clocks for E_POLL retry */
+
+/* Various retry maximums */
+#define FSI_CRC_ERR_RETRIES 10
+#define FSI_MASTER_MAX_BUSY 200
+#define FSI_MASTER_MTOE_COUNT 1000
+
+/* Command encodings */
+#define FSI_CMD_DPOLL 0x2
+#define FSI_CMD_EPOLL 0x3
+#define FSI_CMD_TERM 0x3f
+#define FSI_CMD_ABS_AR 0x4
+#define FSI_CMD_REL_AR 0x5
+#define FSI_CMD_SAME_AR 0x3 /* but only a 2-bit opcode... */
+
+/* Slave responses */
+#define FSI_RESP_ACK 0 /* Success */
+#define FSI_RESP_BUSY 1 /* Slave busy */
+#define FSI_RESP_ERRA 2 /* Any (misc) Error */
+#define FSI_RESP_ERRC 3 /* Slave reports master CRC error */
+
+/* Misc */
+#define FSI_CRC_SIZE 4
+
+/* fsi-master definition and flags */
#define FSI_MASTER_FLAG_SWCLOCK 0x1
struct fsi_master {
@@ -33,6 +66,8 @@ struct fsi_master {
int (*term)(struct fsi_master *, int link, uint8_t id);
int (*send_break)(struct fsi_master *, int link);
int (*link_enable)(struct fsi_master *, int link);
+ int (*link_config)(struct fsi_master *, int link,
+ u8 t_send_delay, u8 t_echo_delay);
};
#define dev_to_fsi_master(d) container_of(d, struct fsi_master, dev)
diff --git a/drivers/fsi/fsi-sbefifo.c b/drivers/fsi/fsi-sbefifo.c
new file mode 100644
index 0000000..6b31cc24
--- /dev/null
+++ b/drivers/fsi/fsi-sbefifo.c
@@ -0,0 +1,1010 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) IBM Corporation 2017
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERGCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/fsi.h>
+#include <linux/fsi-sbefifo.h>
+#include <linux/idr.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/delay.h>
+#include <linux/uio.h>
+#include <linux/vmalloc.h>
+
+/*
+ * The SBEFIFO is a pipe-like FSI device for communicating with
+ * the self boot engine on POWER processors.
+ */
+
+#define DEVICE_NAME "sbefifo"
+#define FSI_ENGID_SBE 0x22
+
+/*
+ * Register layout
+ */
+
+/* Register banks */
+#define SBEFIFO_UP 0x00 /* FSI -> Host */
+#define SBEFIFO_DOWN 0x40 /* Host -> FSI */
+
+/* Per-bank registers */
+#define SBEFIFO_FIFO 0x00 /* The FIFO itself */
+#define SBEFIFO_STS 0x04 /* Status register */
+#define SBEFIFO_STS_PARITY_ERR 0x20000000
+#define SBEFIFO_STS_RESET_REQ 0x02000000
+#define SBEFIFO_STS_GOT_EOT 0x00800000
+#define SBEFIFO_STS_MAX_XFER_LIMIT 0x00400000
+#define SBEFIFO_STS_FULL 0x00200000
+#define SBEFIFO_STS_EMPTY 0x00100000
+#define SBEFIFO_STS_ECNT_MASK 0x000f0000
+#define SBEFIFO_STS_ECNT_SHIFT 16
+#define SBEFIFO_STS_VALID_MASK 0x0000ff00
+#define SBEFIFO_STS_VALID_SHIFT 8
+#define SBEFIFO_STS_EOT_MASK 0x000000ff
+#define SBEFIFO_STS_EOT_SHIFT 0
+#define SBEFIFO_EOT_RAISE 0x08 /* (Up only) Set End Of Transfer */
+#define SBEFIFO_REQ_RESET 0x0C /* (Up only) Reset Request */
+#define SBEFIFO_PERFORM_RESET 0x10 /* (Down only) Perform Reset */
+#define SBEFIFO_EOT_ACK 0x14 /* (Down only) Acknowledge EOT */
+#define SBEFIFO_DOWN_MAX 0x18 /* (Down only) Max transfer */
+
+/* CFAM GP Mailbox SelfBoot Message register */
+#define CFAM_GP_MBOX_SBM_ADDR 0x2824 /* Converted 0x2809 */
+
+#define CFAM_SBM_SBE_BOOTED 0x80000000
+#define CFAM_SBM_SBE_ASYNC_FFDC 0x40000000
+#define CFAM_SBM_SBE_STATE_MASK 0x00f00000
+#define CFAM_SBM_SBE_STATE_SHIFT 20
+
+enum sbe_state
+{
+ SBE_STATE_UNKNOWN = 0x0, // Unkown, initial state
+ SBE_STATE_IPLING = 0x1, // IPL'ing - autonomous mode (transient)
+ SBE_STATE_ISTEP = 0x2, // ISTEP - Running IPL by steps (transient)
+ SBE_STATE_MPIPL = 0x3, // MPIPL
+ SBE_STATE_RUNTIME = 0x4, // SBE Runtime
+ SBE_STATE_DMT = 0x5, // Dead Man Timer State (transient)
+ SBE_STATE_DUMP = 0x6, // Dumping
+ SBE_STATE_FAILURE = 0x7, // Internal SBE failure
+ SBE_STATE_QUIESCE = 0x8, // Final state - needs SBE reset to get out
+};
+
+/* FIFO depth */
+#define SBEFIFO_FIFO_DEPTH 8
+
+/* Helpers */
+#define sbefifo_empty(sts) ((sts) & SBEFIFO_STS_EMPTY)
+#define sbefifo_full(sts) ((sts) & SBEFIFO_STS_FULL)
+#define sbefifo_parity_err(sts) ((sts) & SBEFIFO_STS_PARITY_ERR)
+#define sbefifo_populated(sts) (((sts) & SBEFIFO_STS_ECNT_MASK) >> SBEFIFO_STS_ECNT_SHIFT)
+#define sbefifo_vacant(sts) (SBEFIFO_FIFO_DEPTH - sbefifo_populated(sts))
+#define sbefifo_eot_set(sts) (((sts) & SBEFIFO_STS_EOT_MASK) >> SBEFIFO_STS_EOT_SHIFT)
+
+/* Reset request timeout in ms */
+#define SBEFIFO_RESET_TIMEOUT 10000
+
+/* Timeouts for commands in ms */
+#define SBEFIFO_TIMEOUT_START_CMD 10000
+#define SBEFIFO_TIMEOUT_IN_CMD 1000
+#define SBEFIFO_TIMEOUT_START_RSP 10000
+#define SBEFIFO_TIMEOUT_IN_RSP 1000
+
+/* Other constants */
+#define SBEFIFO_MAX_CMD_LEN PAGE_SIZE
+#define SBEFIFO_RESET_MAGIC 0x52534554 /* "RSET" */
+
+struct sbefifo {
+ uint32_t magic;
+#define SBEFIFO_MAGIC 0x53424546 /* "SBEF" */
+ struct fsi_device *fsi_dev;
+ struct miscdevice mdev;
+ struct mutex lock;
+ char name[32];
+ int idx;
+ bool broken;
+ bool async_ffdc;
+};
+
+struct sbefifo_user {
+ struct sbefifo *sbefifo;
+ struct mutex file_lock;
+ void *pending_cmd;
+ size_t pending_len;
+};
+
+static DEFINE_IDA(sbefifo_ida);
+static DEFINE_MUTEX(sbefifo_ffdc_mutex);
+
+
+static void sbefifo_dump_ffdc(struct device *dev, const __be32 *ffdc,
+ size_t ffdc_sz, bool internal)
+{
+ int pack = 0;
+#define FFDC_LSIZE 60
+ static char ffdc_line[FFDC_LSIZE];
+ char *p = ffdc_line;
+
+ mutex_lock(&sbefifo_ffdc_mutex);
+ while (ffdc_sz) {
+ u32 w0, w1, w2, i;
+ if (ffdc_sz < 3) {
+ dev_err(dev, "SBE invalid FFDC package size %zd\n", ffdc_sz);
+ return;
+ }
+ w0 = be32_to_cpu(*(ffdc++));
+ w1 = be32_to_cpu(*(ffdc++));
+ w2 = be32_to_cpu(*(ffdc++));
+ ffdc_sz -= 3;
+ if ((w0 >> 16) != 0xFFDC) {
+ dev_err(dev, "SBE invalid FFDC package signature %08x %08x %08x\n",
+ w0, w1, w2);
+ break;
+ }
+ w0 &= 0xffff;
+ if (w0 > ffdc_sz) {
+ dev_err(dev, "SBE FFDC package len %d words but only %zd remaining\n",
+ w0, ffdc_sz);
+ w0 = ffdc_sz;
+ break;
+ }
+ if (internal) {
+ dev_warn(dev, "+---- SBE FFDC package %d for async err -----+\n",
+ pack++);
+ } else {
+ dev_warn(dev, "+---- SBE FFDC package %d for cmd %02x:%02x -----+\n",
+ pack++, (w1 >> 8) & 0xff, w1 & 0xff);
+ }
+ dev_warn(dev, "| Response code: %08x |\n", w2);
+ dev_warn(dev, "|-------------------------------------------|\n");
+ for (i = 0; i < w0; i++) {
+ if ((i & 3) == 0) {
+ p = ffdc_line;
+ p += sprintf(p, "| %04x:", i << 4);
+ }
+ p += sprintf(p, " %08x", be32_to_cpu(*(ffdc++)));
+ ffdc_sz--;
+ if ((i & 3) == 3 || i == (w0 - 1)) {
+ while ((i & 3) < 3) {
+ p += sprintf(p, " ");
+ i++;
+ }
+ dev_warn(dev, "%s |\n", ffdc_line);
+ }
+ }
+ dev_warn(dev, "+-------------------------------------------+\n");
+ }
+ mutex_unlock(&sbefifo_ffdc_mutex);
+}
+
+int sbefifo_parse_status(struct device *dev, u16 cmd, __be32 *response,
+ size_t resp_len, size_t *data_len)
+{
+ u32 dh, s0, s1;
+ size_t ffdc_sz;
+
+ if (resp_len < 3) {
+ pr_debug("sbefifo: cmd %04x, response too small: %zd\n",
+ cmd, resp_len);
+ return -ENXIO;
+ }
+ dh = be32_to_cpu(response[resp_len - 1]);
+ if (dh > resp_len || dh < 3) {
+ dev_err(dev, "SBE cmd %02x:%02x status offset out of range: %d/%zd\n",
+ cmd >> 8, cmd & 0xff, dh, resp_len);
+ return -ENXIO;
+ }
+ s0 = be32_to_cpu(response[resp_len - dh]);
+ s1 = be32_to_cpu(response[resp_len - dh + 1]);
+ if (((s0 >> 16) != 0xC0DE) || ((s0 & 0xffff) != cmd)) {
+ dev_err(dev, "SBE cmd %02x:%02x, status signature invalid: 0x%08x 0x%08x\n",
+ cmd >> 8, cmd & 0xff, s0, s1);
+ return -ENXIO;
+ }
+ if (s1 != 0) {
+ ffdc_sz = dh - 3;
+ dev_warn(dev, "SBE error cmd %02x:%02x status=%04x:%04x\n",
+ cmd >> 8, cmd & 0xff, s1 >> 16, s1 & 0xffff);
+ if (ffdc_sz)
+ sbefifo_dump_ffdc(dev, &response[resp_len - dh + 2],
+ ffdc_sz, false);
+ }
+ if (data_len)
+ *data_len = resp_len - dh;
+
+ /*
+ * Primary status don't have the top bit set, so can't be confused with
+ * Linux negative error codes, so return the status word whole.
+ */
+ return s1;
+}
+EXPORT_SYMBOL_GPL(sbefifo_parse_status);
+
+static int sbefifo_regr(struct sbefifo *sbefifo, int reg, u32 *word)
+{
+ __be32 raw_word;
+ int rc;
+
+ rc = fsi_device_read(sbefifo->fsi_dev, reg, &raw_word,
+ sizeof(raw_word));
+ if (rc)
+ return rc;
+
+ *word = be32_to_cpu(raw_word);
+
+ return 0;
+}
+
+static int sbefifo_regw(struct sbefifo *sbefifo, int reg, u32 word)
+{
+ __be32 raw_word = cpu_to_be32(word);
+
+ return fsi_device_write(sbefifo->fsi_dev, reg, &raw_word,
+ sizeof(raw_word));
+}
+
+static int sbefifo_check_sbe_state(struct sbefifo *sbefifo)
+{
+ __be32 raw_word;
+ u32 sbm;
+ int rc;
+
+ rc = fsi_slave_read(sbefifo->fsi_dev->slave, CFAM_GP_MBOX_SBM_ADDR,
+ &raw_word, sizeof(raw_word));
+ if (rc)
+ return rc;
+ sbm = be32_to_cpu(raw_word);
+
+ /* SBE booted at all ? */
+ if (!(sbm & CFAM_SBM_SBE_BOOTED))
+ return -ESHUTDOWN;
+
+ /* Check its state */
+ switch ((sbm & CFAM_SBM_SBE_STATE_MASK) >> CFAM_SBM_SBE_STATE_SHIFT) {
+ case SBE_STATE_UNKNOWN:
+ return -ESHUTDOWN;
+ case SBE_STATE_IPLING:
+ case SBE_STATE_ISTEP:
+ case SBE_STATE_MPIPL:
+ case SBE_STATE_DMT:
+ return -EBUSY;
+ case SBE_STATE_RUNTIME:
+ case SBE_STATE_DUMP: /* Not sure about that one */
+ break;
+ case SBE_STATE_FAILURE:
+ case SBE_STATE_QUIESCE:
+ return -ESHUTDOWN;
+ }
+
+ /* Is there async FFDC available ? Remember it */
+ if (sbm & CFAM_SBM_SBE_ASYNC_FFDC)
+ sbefifo->async_ffdc = true;
+
+ return 0;
+}
+
+/* Don't flip endianness of data to/from FIFO, just pass through. */
+static int sbefifo_down_read(struct sbefifo *sbefifo, __be32 *word)
+{
+ return fsi_device_read(sbefifo->fsi_dev, SBEFIFO_DOWN, word,
+ sizeof(*word));
+}
+
+static int sbefifo_up_write(struct sbefifo *sbefifo, __be32 word)
+{
+ return fsi_device_write(sbefifo->fsi_dev, SBEFIFO_UP, &word,
+ sizeof(word));
+}
+
+static int sbefifo_request_reset(struct sbefifo *sbefifo)
+{
+ struct device *dev = &sbefifo->fsi_dev->dev;
+ u32 status, timeout;
+ int rc;
+
+ dev_dbg(dev, "Requesting FIFO reset\n");
+
+ /* Mark broken first, will be cleared if reset succeeds */
+ sbefifo->broken = true;
+
+ /* Send reset request */
+ rc = sbefifo_regw(sbefifo, SBEFIFO_UP | SBEFIFO_REQ_RESET, 1);
+ if (rc) {
+ dev_err(dev, "Sending reset request failed, rc=%d\n", rc);
+ return rc;
+ }
+
+ /* Wait for it to complete */
+ for (timeout = 0; timeout < SBEFIFO_RESET_TIMEOUT; timeout++) {
+ rc = sbefifo_regr(sbefifo, SBEFIFO_UP | SBEFIFO_STS, &status);
+ if (rc) {
+ dev_err(dev, "Failed to read UP fifo status during reset"
+ " , rc=%d\n", rc);
+ return rc;
+ }
+
+ if (!(status & SBEFIFO_STS_RESET_REQ)) {
+ dev_dbg(dev, "FIFO reset done\n");
+ sbefifo->broken = false;
+ return 0;
+ }
+
+ msleep(1);
+ }
+ dev_err(dev, "FIFO reset timed out\n");
+
+ return -ETIMEDOUT;
+}
+
+static int sbefifo_cleanup_hw(struct sbefifo *sbefifo)
+{
+ struct device *dev = &sbefifo->fsi_dev->dev;
+ u32 up_status, down_status;
+ bool need_reset = false;
+ int rc;
+
+ rc = sbefifo_check_sbe_state(sbefifo);
+ if (rc) {
+ dev_dbg(dev, "SBE state=%d\n", rc);
+ return rc;
+ }
+
+ /* If broken, we don't need to look at status, go straight to reset */
+ if (sbefifo->broken)
+ goto do_reset;
+
+ rc = sbefifo_regr(sbefifo, SBEFIFO_UP | SBEFIFO_STS, &up_status);
+ if (rc) {
+ dev_err(dev, "Cleanup: Reading UP status failed, rc=%d\n", rc);
+
+ /* Will try reset again on next attempt at using it */
+ sbefifo->broken = true;
+ return rc;
+ }
+
+ rc = sbefifo_regr(sbefifo, SBEFIFO_DOWN | SBEFIFO_STS, &down_status);
+ if (rc) {
+ dev_err(dev, "Cleanup: Reading DOWN status failed, rc=%d\n", rc);
+
+ /* Will try reset again on next attempt at using it */
+ sbefifo->broken = true;
+ return rc;
+ }
+
+ /* The FIFO already contains a reset request from the SBE ? */
+ if (down_status & SBEFIFO_STS_RESET_REQ) {
+ dev_info(dev, "Cleanup: FIFO reset request set, resetting\n");
+ rc = sbefifo_regw(sbefifo, SBEFIFO_UP, SBEFIFO_PERFORM_RESET);
+ if (rc) {
+ sbefifo->broken = true;
+ dev_err(dev, "Cleanup: Reset reg write failed, rc=%d\n", rc);
+ return rc;
+ }
+ sbefifo->broken = false;
+ return 0;
+ }
+
+ /* Parity error on either FIFO ? */
+ if ((up_status | down_status) & SBEFIFO_STS_PARITY_ERR)
+ need_reset = true;
+
+ /* Either FIFO not empty ? */
+ if (!((up_status & down_status) & SBEFIFO_STS_EMPTY))
+ need_reset = true;
+
+ if (!need_reset)
+ return 0;
+
+ dev_info(dev, "Cleanup: FIFO not clean (up=0x%08x down=0x%08x)\n",
+ up_status, down_status);
+
+ do_reset:
+
+ /* Mark broken, will be cleared if/when reset succeeds */
+ return sbefifo_request_reset(sbefifo);
+}
+
+static int sbefifo_wait(struct sbefifo *sbefifo, bool up,
+ u32 *status, unsigned long timeout)
+{
+ struct device *dev = &sbefifo->fsi_dev->dev;
+ unsigned long end_time;
+ bool ready = false;
+ u32 addr, sts = 0;
+ int rc;
+
+ dev_vdbg(dev, "Wait on %s fifo...\n", up ? "up" : "down");
+
+ addr = (up ? SBEFIFO_UP : SBEFIFO_DOWN) | SBEFIFO_STS;
+
+ end_time = jiffies + timeout;
+ while (!time_after(jiffies, end_time)) {
+ cond_resched();
+ rc = sbefifo_regr(sbefifo, addr, &sts);
+ if (rc < 0) {
+ dev_err(dev, "FSI error %d reading status register\n", rc);
+ return rc;
+ }
+ if (!up && sbefifo_parity_err(sts)) {
+ dev_err(dev, "Parity error in DOWN FIFO\n");
+ return -ENXIO;
+ }
+ ready = !(up ? sbefifo_full(sts) : sbefifo_empty(sts));
+ if (ready)
+ break;
+ }
+ if (!ready) {
+ dev_err(dev, "%s FIFO Timeout ! status=%08x\n", up ? "UP" : "DOWN", sts);
+ return -ETIMEDOUT;
+ }
+ dev_vdbg(dev, "End of wait status: %08x\n", sts);
+
+ *status = sts;
+
+ return 0;
+}
+
+static int sbefifo_send_command(struct sbefifo *sbefifo,
+ const __be32 *command, size_t cmd_len)
+{
+ struct device *dev = &sbefifo->fsi_dev->dev;
+ size_t len, chunk, vacant = 0, remaining = cmd_len;
+ unsigned long timeout;
+ u32 status;
+ int rc;
+
+ dev_vdbg(dev, "sending command (%zd words, cmd=%04x)\n",
+ cmd_len, be32_to_cpu(command[1]));
+
+ /* As long as there's something to send */
+ timeout = msecs_to_jiffies(SBEFIFO_TIMEOUT_START_CMD);
+ while (remaining) {
+ /* Wait for room in the FIFO */
+ rc = sbefifo_wait(sbefifo, true, &status, timeout);
+ if (rc < 0)
+ return rc;
+ timeout = msecs_to_jiffies(SBEFIFO_TIMEOUT_IN_CMD);
+
+ vacant = sbefifo_vacant(status);
+ len = chunk = min(vacant, remaining);
+
+ dev_vdbg(dev, " status=%08x vacant=%zd chunk=%zd\n",
+ status, vacant, chunk);
+
+ /* Write as much as we can */
+ while (len--) {
+ rc = sbefifo_up_write(sbefifo, *(command++));
+ if (rc) {
+ dev_err(dev, "FSI error %d writing UP FIFO\n", rc);
+ return rc;
+ }
+ }
+ remaining -= chunk;
+ vacant -= chunk;
+ }
+
+ /* If there's no room left, wait for some to write EOT */
+ if (!vacant) {
+ rc = sbefifo_wait(sbefifo, true, &status, timeout);
+ if (rc)
+ return rc;
+ }
+
+ /* Send an EOT */
+ rc = sbefifo_regw(sbefifo, SBEFIFO_UP | SBEFIFO_EOT_RAISE, 0);
+ if (rc)
+ dev_err(dev, "FSI error %d writing EOT\n", rc);
+ return rc;
+}
+
+static int sbefifo_read_response(struct sbefifo *sbefifo, struct iov_iter *response)
+{
+ struct device *dev = &sbefifo->fsi_dev->dev;
+ u32 status, eot_set;
+ unsigned long timeout;
+ bool overflow = false;
+ __be32 data;
+ size_t len;
+ int rc;
+
+ dev_vdbg(dev, "reading response, buflen = %zd\n", iov_iter_count(response));
+
+ timeout = msecs_to_jiffies(SBEFIFO_TIMEOUT_START_RSP);
+ for (;;) {
+ /* Grab FIFO status (this will handle parity errors) */
+ rc = sbefifo_wait(sbefifo, false, &status, timeout);
+ if (rc < 0)
+ return rc;
+ timeout = msecs_to_jiffies(SBEFIFO_TIMEOUT_IN_RSP);
+
+ /* Decode status */
+ len = sbefifo_populated(status);
+ eot_set = sbefifo_eot_set(status);
+
+ dev_vdbg(dev, " chunk size %zd eot_set=0x%x\n", len, eot_set);
+
+ /* Go through the chunk */
+ while(len--) {
+ /* Read the data */
+ rc = sbefifo_down_read(sbefifo, &data);
+ if (rc < 0)
+ return rc;
+
+ /* Was it an EOT ? */
+ if (eot_set & 0x80) {
+ /*
+ * There should be nothing else in the FIFO,
+ * if there is, mark broken, this will force
+ * a reset on next use, but don't fail the
+ * command.
+ */
+ if (len) {
+ dev_warn(dev, "FIFO read hit"
+ " EOT with still %zd data\n",
+ len);
+ sbefifo->broken = true;
+ }
+
+ /* We are done */
+ rc = sbefifo_regw(sbefifo,
+ SBEFIFO_DOWN | SBEFIFO_EOT_ACK, 0);
+
+ /*
+ * If that write fail, still complete the request but mark
+ * the fifo as broken for subsequent reset (not much else
+ * we can do here).
+ */
+ if (rc) {
+ dev_err(dev, "FSI error %d ack'ing EOT\n", rc);
+ sbefifo->broken = true;
+ }
+
+ /* Tell whether we overflowed */
+ return overflow ? -EOVERFLOW : 0;
+ }
+
+ /* Store it if there is room */
+ if (iov_iter_count(response) >= sizeof(__be32)) {
+ if (copy_to_iter(&data, sizeof(__be32), response) < sizeof(__be32))
+ return -EFAULT;
+ } else {
+ dev_vdbg(dev, "Response overflowed !\n");
+
+ overflow = true;
+ }
+
+ /* Next EOT bit */
+ eot_set <<= 1;
+ }
+ }
+ /* Shouldn't happen */
+ return -EIO;
+}
+
+static int sbefifo_do_command(struct sbefifo *sbefifo,
+ const __be32 *command, size_t cmd_len,
+ struct iov_iter *response)
+{
+ /* Try sending the command */
+ int rc = sbefifo_send_command(sbefifo, command, cmd_len);
+ if (rc)
+ return rc;
+
+ /* Now, get the response */
+ return sbefifo_read_response(sbefifo, response);
+}
+
+static void sbefifo_collect_async_ffdc(struct sbefifo *sbefifo)
+{
+ struct device *dev = &sbefifo->fsi_dev->dev;
+ struct iov_iter ffdc_iter;
+ struct kvec ffdc_iov;
+ __be32 *ffdc;
+ size_t ffdc_sz;
+ __be32 cmd[2];
+ int rc;
+
+ sbefifo->async_ffdc = false;
+ ffdc = vmalloc(SBEFIFO_MAX_FFDC_SIZE);
+ if (!ffdc) {
+ dev_err(dev, "Failed to allocate SBE FFDC buffer\n");
+ return;
+ }
+ ffdc_iov.iov_base = ffdc;
+ ffdc_iov.iov_len = SBEFIFO_MAX_FFDC_SIZE;
+ iov_iter_kvec(&ffdc_iter, WRITE | ITER_KVEC, &ffdc_iov, 1, SBEFIFO_MAX_FFDC_SIZE);
+ cmd[0] = cpu_to_be32(2);
+ cmd[1] = cpu_to_be32(SBEFIFO_CMD_GET_SBE_FFDC);
+ rc = sbefifo_do_command(sbefifo, cmd, 2, &ffdc_iter);
+ if (rc != 0) {
+ dev_err(dev, "Error %d retrieving SBE FFDC\n", rc);
+ goto bail;
+ }
+ ffdc_sz = SBEFIFO_MAX_FFDC_SIZE - iov_iter_count(&ffdc_iter);
+ ffdc_sz /= sizeof(__be32);
+ rc = sbefifo_parse_status(dev, SBEFIFO_CMD_GET_SBE_FFDC, ffdc,
+ ffdc_sz, &ffdc_sz);
+ if (rc != 0) {
+ dev_err(dev, "Error %d decoding SBE FFDC\n", rc);
+ goto bail;
+ }
+ if (ffdc_sz > 0)
+ sbefifo_dump_ffdc(dev, ffdc, ffdc_sz, true);
+ bail:
+ vfree(ffdc);
+
+}
+
+static int __sbefifo_submit(struct sbefifo *sbefifo,
+ const __be32 *command, size_t cmd_len,
+ struct iov_iter *response)
+{
+ struct device *dev = &sbefifo->fsi_dev->dev;
+ int rc;
+
+ if (cmd_len < 2 || be32_to_cpu(command[0]) != cmd_len) {
+ dev_vdbg(dev, "Invalid command len %zd (header: %d)\n",
+ cmd_len, be32_to_cpu(command[0]));
+ return -EINVAL;
+ }
+
+ /* First ensure the HW is in a clean state */
+ rc = sbefifo_cleanup_hw(sbefifo);
+ if (rc)
+ return rc;
+
+ /* Look for async FFDC first if any */
+ if (sbefifo->async_ffdc)
+ sbefifo_collect_async_ffdc(sbefifo);
+
+ rc = sbefifo_do_command(sbefifo, command, cmd_len, response);
+ if (rc != 0 && rc != -EOVERFLOW)
+ goto fail;
+ return rc;
+ fail:
+ /*
+ * On failure, attempt a reset. Ignore the result, it will mark
+ * the fifo broken if the reset fails
+ */
+ sbefifo_request_reset(sbefifo);
+
+ /* Return original error */
+ return rc;
+}
+
+/**
+ * sbefifo_submit() - Submit and SBE fifo command and receive response
+ * @dev: The sbefifo device
+ * @command: The raw command data
+ * @cmd_len: The command size (in 32-bit words)
+ * @response: The output response buffer
+ * @resp_len: In: Response buffer size, Out: Response size
+ *
+ * This will perform the entire operation. If the reponse buffer
+ * overflows, returns -EOVERFLOW
+ */
+int sbefifo_submit(struct device *dev, const __be32 *command, size_t cmd_len,
+ __be32 *response, size_t *resp_len)
+{
+ struct sbefifo *sbefifo;
+ struct iov_iter resp_iter;
+ struct kvec resp_iov;
+ size_t rbytes;
+ int rc;
+
+ if (!dev)
+ return -ENODEV;
+ sbefifo = dev_get_drvdata(dev);
+ if (!sbefifo)
+ return -ENODEV;
+ if (WARN_ON_ONCE(sbefifo->magic != SBEFIFO_MAGIC))
+ return -ENODEV;
+ if (!resp_len || !command || !response || cmd_len > SBEFIFO_MAX_CMD_LEN)
+ return -EINVAL;
+
+ /* Prepare iov iterator */
+ rbytes = (*resp_len) * sizeof(__be32);
+ resp_iov.iov_base = response;
+ resp_iov.iov_len = rbytes;
+ iov_iter_kvec(&resp_iter, WRITE | ITER_KVEC, &resp_iov, 1, rbytes);
+
+ /* Perform the command */
+ mutex_lock(&sbefifo->lock);
+ rc = __sbefifo_submit(sbefifo, command, cmd_len, &resp_iter);
+ mutex_unlock(&sbefifo->lock);
+
+ /* Extract the response length */
+ rbytes -= iov_iter_count(&resp_iter);
+ *resp_len = rbytes / sizeof(__be32);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(sbefifo_submit);
+
+/*
+ * Char device interface
+ */
+static int sbefifo_user_open(struct inode *inode, struct file *file)
+{
+ struct sbefifo *sbefifo = container_of(file->private_data,
+ struct sbefifo, mdev);
+ struct sbefifo_user *user;
+
+ user = kzalloc(sizeof(struct sbefifo_user), GFP_KERNEL);
+ if (!user)
+ return -ENOMEM;
+
+ file->private_data = user;
+ user->sbefifo = sbefifo;
+ user->pending_cmd = (void *)__get_free_page(GFP_KERNEL);
+ if (!user->pending_cmd) {
+ kfree(user);
+ return -ENOMEM;
+ }
+ mutex_init(&user->file_lock);
+
+ return 0;
+}
+
+static ssize_t sbefifo_user_read(struct file *file, char __user *buf,
+ size_t len, loff_t *offset)
+{
+ struct sbefifo_user *user = file->private_data;
+ struct sbefifo *sbefifo;
+ struct iov_iter resp_iter;
+ struct iovec resp_iov;
+ size_t cmd_len;
+ int rc;
+
+ if (!user)
+ return -EINVAL;
+ sbefifo = user->sbefifo;
+ if (len & 3)
+ return -EINVAL;
+
+ mutex_lock(&user->file_lock);
+
+ /* Cronus relies on -EAGAIN after a short read */
+ if (user->pending_len == 0) {
+ rc = -EAGAIN;
+ goto bail;
+ }
+ if (user->pending_len < 8) {
+ rc = -EINVAL;
+ goto bail;
+ }
+ cmd_len = user->pending_len >> 2;
+
+ /* Prepare iov iterator */
+ resp_iov.iov_base = buf;
+ resp_iov.iov_len = len;
+ iov_iter_init(&resp_iter, WRITE, &resp_iov, 1, len);
+
+ /* Perform the command */
+ mutex_lock(&sbefifo->lock);
+ rc = __sbefifo_submit(sbefifo, user->pending_cmd, cmd_len, &resp_iter);
+ mutex_unlock(&sbefifo->lock);
+ if (rc < 0)
+ goto bail;
+
+ /* Extract the response length */
+ rc = len - iov_iter_count(&resp_iter);
+ bail:
+ user->pending_len = 0;
+ mutex_unlock(&user->file_lock);
+ return rc;
+}
+
+static ssize_t sbefifo_user_write(struct file *file, const char __user *buf,
+ size_t len, loff_t *offset)
+{
+ struct sbefifo_user *user = file->private_data;
+ struct sbefifo *sbefifo;
+ int rc = len;
+
+ if (!user)
+ return -EINVAL;
+ sbefifo = user->sbefifo;
+ if (len > SBEFIFO_MAX_CMD_LEN)
+ return -EINVAL;
+ if (len & 3)
+ return -EINVAL;
+
+ mutex_lock(&user->file_lock);
+
+ /* Copy the command into the staging buffer */
+ if (copy_from_user(user->pending_cmd, buf, len)) {
+ rc = -EFAULT;
+ goto bail;
+ }
+
+ /* Check for the magic reset command */
+ if (len == 4 && be32_to_cpu(*(__be32 *)user->pending_cmd) ==
+ SBEFIFO_RESET_MAGIC) {
+
+ /* Clear out any pending command */
+ user->pending_len = 0;
+
+ /* Trigger reset request */
+ mutex_lock(&sbefifo->lock);
+ rc = sbefifo_request_reset(user->sbefifo);
+ mutex_unlock(&sbefifo->lock);
+ if (rc == 0)
+ rc = 4;
+ goto bail;
+ }
+
+ /* Update the staging buffer size */
+ user->pending_len = len;
+ bail:
+ mutex_unlock(&user->file_lock);
+
+ /* And that's it, we'll issue the command on a read */
+ return rc;
+}
+
+static int sbefifo_user_release(struct inode *inode, struct file *file)
+{
+ struct sbefifo_user *user = file->private_data;
+
+ if (!user)
+ return -EINVAL;
+
+ free_page((unsigned long)user->pending_cmd);
+ kfree(user);
+
+ return 0;
+}
+
+static const struct file_operations sbefifo_fops = {
+ .owner = THIS_MODULE,
+ .open = sbefifo_user_open,
+ .read = sbefifo_user_read,
+ .write = sbefifo_user_write,
+ .release = sbefifo_user_release,
+};
+
+/*
+ * Probe/remove
+ */
+
+static int sbefifo_probe(struct device *dev)
+{
+ struct fsi_device *fsi_dev = to_fsi_dev(dev);
+ struct sbefifo *sbefifo;
+ struct device_node *np;
+ struct platform_device *child;
+ char child_name[32];
+ int rc, child_idx = 0;
+
+ dev_dbg(dev, "Found sbefifo device\n");
+
+ sbefifo = devm_kzalloc(dev, sizeof(*sbefifo), GFP_KERNEL);
+ if (!sbefifo)
+ return -ENOMEM;
+ sbefifo->magic = SBEFIFO_MAGIC;
+ sbefifo->fsi_dev = fsi_dev;
+ mutex_init(&sbefifo->lock);
+
+ /*
+ * Try cleaning up the FIFO. If this fails, we still register the
+ * driver and will try cleaning things up again on the next access.
+ */
+ rc = sbefifo_cleanup_hw(sbefifo);
+ if (rc && rc != -ESHUTDOWN)
+ dev_err(dev, "Initial HW cleanup failed, will retry later\n");
+
+ sbefifo->idx = ida_simple_get(&sbefifo_ida, 1, INT_MAX, GFP_KERNEL);
+ snprintf(sbefifo->name, sizeof(sbefifo->name), "sbefifo%d",
+ sbefifo->idx);
+
+ dev_set_drvdata(dev, sbefifo);
+
+ /* Create misc chardev for userspace access */
+ sbefifo->mdev.minor = MISC_DYNAMIC_MINOR;
+ sbefifo->mdev.fops = &sbefifo_fops;
+ sbefifo->mdev.name = sbefifo->name;
+ sbefifo->mdev.parent = dev;
+ rc = misc_register(&sbefifo->mdev);
+ if (rc) {
+ dev_err(dev, "Failed to register miscdevice: %d\n", rc);
+ ida_simple_remove(&sbefifo_ida, sbefifo->idx);
+ return rc;
+ }
+
+ /* Create platform devs for dts child nodes (occ, etc) */
+ for_each_available_child_of_node(dev->of_node, np) {
+ snprintf(child_name, sizeof(child_name), "%s-dev%d",
+ sbefifo->name, child_idx++);
+ child = of_platform_device_create(np, child_name, dev);
+ if (!child)
+ dev_warn(dev, "failed to create child %s dev\n",
+ child_name);
+ }
+
+ return 0;
+}
+
+static int sbefifo_unregister_child(struct device *dev, void *data)
+{
+ struct platform_device *child = to_platform_device(dev);
+
+ of_device_unregister(child);
+ if (dev->of_node)
+ of_node_clear_flag(dev->of_node, OF_POPULATED);
+
+ return 0;
+}
+
+static int sbefifo_remove(struct device *dev)
+{
+ struct sbefifo *sbefifo = dev_get_drvdata(dev);
+
+ dev_dbg(dev, "Removing sbefifo device...\n");
+
+ misc_deregister(&sbefifo->mdev);
+ device_for_each_child(dev, NULL, sbefifo_unregister_child);
+
+ ida_simple_remove(&sbefifo_ida, sbefifo->idx);
+
+ return 0;
+}
+
+static struct fsi_device_id sbefifo_ids[] = {
+ {
+ .engine_type = FSI_ENGID_SBE,
+ .version = FSI_VERSION_ANY,
+ },
+ { 0 }
+};
+
+static struct fsi_driver sbefifo_drv = {
+ .id_table = sbefifo_ids,
+ .drv = {
+ .name = DEVICE_NAME,
+ .bus = &fsi_bus_type,
+ .probe = sbefifo_probe,
+ .remove = sbefifo_remove,
+ }
+};
+
+static int sbefifo_init(void)
+{
+ return fsi_driver_register(&sbefifo_drv);
+}
+
+static void sbefifo_exit(void)
+{
+ fsi_driver_unregister(&sbefifo_drv);
+
+ ida_destroy(&sbefifo_ida);
+}
+
+module_init(sbefifo_init);
+module_exit(sbefifo_exit);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Brad Bishop <bradleyb@fuzziesquirrel.com>");
+MODULE_AUTHOR("Eddie James <eajames@linux.vnet.ibm.com>");
+MODULE_AUTHOR("Andrew Jeffery <andrew@aj.id.au>");
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("Linux device interface to the POWER Self Boot Engine");
diff --git a/drivers/fsi/fsi-scom.c b/drivers/fsi/fsi-scom.c
index e13353a..39c7435 100644
--- a/drivers/fsi/fsi-scom.c
+++ b/drivers/fsi/fsi-scom.c
@@ -24,25 +24,63 @@
#include <linux/list.h>
#include <linux/idr.h>
-#define FSI_ENGID_SCOM 0x5
+#include <uapi/linux/fsi.h>
-#define SCOM_FSI2PIB_DELAY 50
+#define FSI_ENGID_SCOM 0x5
/* SCOM engine register set */
#define SCOM_DATA0_REG 0x00
#define SCOM_DATA1_REG 0x04
#define SCOM_CMD_REG 0x08
-#define SCOM_RESET_REG 0x1C
+#define SCOM_FSI2PIB_RESET_REG 0x18
+#define SCOM_STATUS_REG 0x1C /* Read */
+#define SCOM_PIB_RESET_REG 0x1C /* Write */
-#define SCOM_RESET_CMD 0x80000000
+/* Command register */
#define SCOM_WRITE_CMD 0x80000000
+#define SCOM_READ_CMD 0x00000000
+
+/* Status register bits */
+#define SCOM_STATUS_ERR_SUMMARY 0x80000000
+#define SCOM_STATUS_PROTECTION 0x01000000
+#define SCOM_STATUS_PARITY 0x04000000
+#define SCOM_STATUS_PIB_ABORT 0x00100000
+#define SCOM_STATUS_PIB_RESP_MASK 0x00007000
+#define SCOM_STATUS_PIB_RESP_SHIFT 12
+
+#define SCOM_STATUS_ANY_ERR (SCOM_STATUS_ERR_SUMMARY | \
+ SCOM_STATUS_PROTECTION | \
+ SCOM_STATUS_PARITY | \
+ SCOM_STATUS_PIB_ABORT | \
+ SCOM_STATUS_PIB_RESP_MASK)
+/* SCOM address encodings */
+#define XSCOM_ADDR_IND_FLAG BIT_ULL(63)
+#define XSCOM_ADDR_INF_FORM1 BIT_ULL(60)
+
+/* SCOM indirect stuff */
+#define XSCOM_ADDR_DIRECT_PART 0x7fffffffull
+#define XSCOM_ADDR_INDIRECT_PART 0x000fffff00000000ull
+#define XSCOM_DATA_IND_READ BIT_ULL(63)
+#define XSCOM_DATA_IND_COMPLETE BIT_ULL(31)
+#define XSCOM_DATA_IND_ERR_MASK 0x70000000ull
+#define XSCOM_DATA_IND_ERR_SHIFT 28
+#define XSCOM_DATA_IND_DATA 0x0000ffffull
+#define XSCOM_DATA_IND_FORM1_DATA 0x000fffffffffffffull
+#define XSCOM_ADDR_FORM1_LOW 0x000ffffffffull
+#define XSCOM_ADDR_FORM1_HI 0xfff00000000ull
+#define XSCOM_ADDR_FORM1_HI_SHIFT 20
+
+/* Retries */
+#define SCOM_MAX_RETRIES 100 /* Retries on busy */
+#define SCOM_MAX_IND_RETRIES 10 /* Retries indirect not ready */
struct scom_device {
struct list_head link;
struct fsi_device *fsi_dev;
struct miscdevice mdev;
+ struct mutex lock;
char name[32];
- int idx;
+ int idx;
};
#define to_scom_dev(x) container_of((x), struct scom_device, mdev)
@@ -51,11 +89,11 @@ static struct list_head scom_devices;
static DEFINE_IDA(scom_ida);
-static int put_scom(struct scom_device *scom_dev, uint64_t value,
- uint32_t addr)
+static int __put_scom(struct scom_device *scom_dev, uint64_t value,
+ uint32_t addr, uint32_t *status)
{
+ __be32 data, raw_status;
int rc;
- uint32_t data;
data = cpu_to_be32((value >> 32) & 0xffffffff);
rc = fsi_device_write(scom_dev->fsi_dev, SCOM_DATA0_REG, &data,
@@ -70,53 +108,285 @@ static int put_scom(struct scom_device *scom_dev, uint64_t value,
return rc;
data = cpu_to_be32(SCOM_WRITE_CMD | addr);
- return fsi_device_write(scom_dev->fsi_dev, SCOM_CMD_REG, &data,
- sizeof(uint32_t));
-}
-
-static int get_scom(struct scom_device *scom_dev, uint64_t *value,
- uint32_t addr)
-{
- uint32_t result, data;
- int rc;
-
- *value = 0ULL;
- data = cpu_to_be32(addr);
rc = fsi_device_write(scom_dev->fsi_dev, SCOM_CMD_REG, &data,
sizeof(uint32_t));
if (rc)
return rc;
-
- rc = fsi_device_read(scom_dev->fsi_dev, SCOM_DATA0_REG, &result,
- sizeof(uint32_t));
+ rc = fsi_device_read(scom_dev->fsi_dev, SCOM_STATUS_REG, &raw_status,
+ sizeof(uint32_t));
if (rc)
return rc;
-
- *value |= (uint64_t)cpu_to_be32(result) << 32;
- rc = fsi_device_read(scom_dev->fsi_dev, SCOM_DATA1_REG, &result,
- sizeof(uint32_t));
- if (rc)
- return rc;
-
- *value |= cpu_to_be32(result);
+ *status = be32_to_cpu(raw_status);
return 0;
}
-static ssize_t scom_read(struct file *filep, char __user *buf, size_t len,
- loff_t *offset)
+static int __get_scom(struct scom_device *scom_dev, uint64_t *value,
+ uint32_t addr, uint32_t *status)
{
+ __be32 data, raw_status;
int rc;
+
+
+ *value = 0ULL;
+ data = cpu_to_be32(SCOM_READ_CMD | addr);
+ rc = fsi_device_write(scom_dev->fsi_dev, SCOM_CMD_REG, &data,
+ sizeof(uint32_t));
+ if (rc)
+ return rc;
+ rc = fsi_device_read(scom_dev->fsi_dev, SCOM_STATUS_REG, &raw_status,
+ sizeof(uint32_t));
+ if (rc)
+ return rc;
+
+ /*
+ * Read the data registers even on error, so we don't have
+ * to interpret the status register here.
+ */
+ rc = fsi_device_read(scom_dev->fsi_dev, SCOM_DATA0_REG, &data,
+ sizeof(uint32_t));
+ if (rc)
+ return rc;
+ *value |= (uint64_t)be32_to_cpu(data) << 32;
+ rc = fsi_device_read(scom_dev->fsi_dev, SCOM_DATA1_REG, &data,
+ sizeof(uint32_t));
+ if (rc)
+ return rc;
+ *value |= be32_to_cpu(data);
+ *status = be32_to_cpu(raw_status);
+
+ return rc;
+}
+
+static int put_indirect_scom_form0(struct scom_device *scom, uint64_t value,
+ uint64_t addr, uint32_t *status)
+{
+ uint64_t ind_data, ind_addr;
+ int rc, retries, err = 0;
+
+ if (value & ~XSCOM_DATA_IND_DATA)
+ return -EINVAL;
+
+ ind_addr = addr & XSCOM_ADDR_DIRECT_PART;
+ ind_data = (addr & XSCOM_ADDR_INDIRECT_PART) | value;
+ rc = __put_scom(scom, ind_data, ind_addr, status);
+ if (rc || (*status & SCOM_STATUS_ANY_ERR))
+ return rc;
+
+ for (retries = 0; retries < SCOM_MAX_IND_RETRIES; retries++) {
+ rc = __get_scom(scom, &ind_data, addr, status);
+ if (rc || (*status & SCOM_STATUS_ANY_ERR))
+ return rc;
+
+ err = (ind_data & XSCOM_DATA_IND_ERR_MASK) >> XSCOM_DATA_IND_ERR_SHIFT;
+ *status = err << SCOM_STATUS_PIB_RESP_SHIFT;
+ if ((ind_data & XSCOM_DATA_IND_COMPLETE) || (err != SCOM_PIB_BLOCKED))
+ return 0;
+
+ msleep(1);
+ }
+ return rc;
+}
+
+static int put_indirect_scom_form1(struct scom_device *scom, uint64_t value,
+ uint64_t addr, uint32_t *status)
+{
+ uint64_t ind_data, ind_addr;
+
+ if (value & ~XSCOM_DATA_IND_FORM1_DATA)
+ return -EINVAL;
+
+ ind_addr = addr & XSCOM_ADDR_FORM1_LOW;
+ ind_data = value | (addr & XSCOM_ADDR_FORM1_HI) << XSCOM_ADDR_FORM1_HI_SHIFT;
+ return __put_scom(scom, ind_data, ind_addr, status);
+}
+
+static int get_indirect_scom_form0(struct scom_device *scom, uint64_t *value,
+ uint64_t addr, uint32_t *status)
+{
+ uint64_t ind_data, ind_addr;
+ int rc, retries, err = 0;
+
+ ind_addr = addr & XSCOM_ADDR_DIRECT_PART;
+ ind_data = (addr & XSCOM_ADDR_INDIRECT_PART) | XSCOM_DATA_IND_READ;
+ rc = __put_scom(scom, ind_data, ind_addr, status);
+ if (rc || (*status & SCOM_STATUS_ANY_ERR))
+ return rc;
+
+ for (retries = 0; retries < SCOM_MAX_IND_RETRIES; retries++) {
+ rc = __get_scom(scom, &ind_data, addr, status);
+ if (rc || (*status & SCOM_STATUS_ANY_ERR))
+ return rc;
+
+ err = (ind_data & XSCOM_DATA_IND_ERR_MASK) >> XSCOM_DATA_IND_ERR_SHIFT;
+ *status = err << SCOM_STATUS_PIB_RESP_SHIFT;
+ *value = ind_data & XSCOM_DATA_IND_DATA;
+
+ if ((ind_data & XSCOM_DATA_IND_COMPLETE) || (err != SCOM_PIB_BLOCKED))
+ return 0;
+
+ msleep(1);
+ }
+ return rc;
+}
+
+static int raw_put_scom(struct scom_device *scom, uint64_t value,
+ uint64_t addr, uint32_t *status)
+{
+ if (addr & XSCOM_ADDR_IND_FLAG) {
+ if (addr & XSCOM_ADDR_INF_FORM1)
+ return put_indirect_scom_form1(scom, value, addr, status);
+ else
+ return put_indirect_scom_form0(scom, value, addr, status);
+ } else
+ return __put_scom(scom, value, addr, status);
+}
+
+static int raw_get_scom(struct scom_device *scom, uint64_t *value,
+ uint64_t addr, uint32_t *status)
+{
+ if (addr & XSCOM_ADDR_IND_FLAG) {
+ if (addr & XSCOM_ADDR_INF_FORM1)
+ return -ENXIO;
+ return get_indirect_scom_form0(scom, value, addr, status);
+ } else
+ return __get_scom(scom, value, addr, status);
+}
+
+static int handle_fsi2pib_status(struct scom_device *scom, uint32_t status)
+{
+ uint32_t dummy = -1;
+
+ if (status & SCOM_STATUS_PROTECTION)
+ return -EPERM;
+ if (status & SCOM_STATUS_PARITY) {
+ fsi_device_write(scom->fsi_dev, SCOM_FSI2PIB_RESET_REG, &dummy,
+ sizeof(uint32_t));
+ return -EIO;
+ }
+ /* Return -EBUSY on PIB abort to force a retry */
+ if (status & SCOM_STATUS_PIB_ABORT)
+ return -EBUSY;
+ if (status & SCOM_STATUS_ERR_SUMMARY) {
+ fsi_device_write(scom->fsi_dev, SCOM_FSI2PIB_RESET_REG, &dummy,
+ sizeof(uint32_t));
+ return -EIO;
+ }
+ return 0;
+}
+
+static int handle_pib_status(struct scom_device *scom, uint8_t status)
+{
+ uint32_t dummy = -1;
+
+ if (status == SCOM_PIB_SUCCESS)
+ return 0;
+ if (status == SCOM_PIB_BLOCKED)
+ return -EBUSY;
+
+ /* Reset the bridge */
+ fsi_device_write(scom->fsi_dev, SCOM_FSI2PIB_RESET_REG, &dummy,
+ sizeof(uint32_t));
+
+ switch(status) {
+ case SCOM_PIB_OFFLINE:
+ return -ENODEV;
+ case SCOM_PIB_BAD_ADDR:
+ return -ENXIO;
+ case SCOM_PIB_TIMEOUT:
+ return -ETIMEDOUT;
+ case SCOM_PIB_PARTIAL:
+ case SCOM_PIB_CLK_ERR:
+ case SCOM_PIB_PARITY_ERR:
+ default:
+ return -EIO;
+ }
+}
+
+static int put_scom(struct scom_device *scom, uint64_t value,
+ uint64_t addr)
+{
+ uint32_t status, dummy = -1;
+ int rc, retries;
+
+ for (retries = 0; retries < SCOM_MAX_RETRIES; retries++) {
+ rc = raw_put_scom(scom, value, addr, &status);
+ if (rc) {
+ /* Try resetting the bridge if FSI fails */
+ if (rc != -ENODEV && retries == 0) {
+ fsi_device_write(scom->fsi_dev, SCOM_FSI2PIB_RESET_REG,
+ &dummy, sizeof(uint32_t));
+ rc = -EBUSY;
+ } else
+ return rc;
+ } else
+ rc = handle_fsi2pib_status(scom, status);
+ if (rc && rc != -EBUSY)
+ break;
+ if (rc == 0) {
+ rc = handle_pib_status(scom,
+ (status & SCOM_STATUS_PIB_RESP_MASK)
+ >> SCOM_STATUS_PIB_RESP_SHIFT);
+ if (rc && rc != -EBUSY)
+ break;
+ }
+ if (rc == 0)
+ break;
+ msleep(1);
+ }
+ return rc;
+}
+
+static int get_scom(struct scom_device *scom, uint64_t *value,
+ uint64_t addr)
+{
+ uint32_t status, dummy = -1;
+ int rc, retries;
+
+ for (retries = 0; retries < SCOM_MAX_RETRIES; retries++) {
+ rc = raw_get_scom(scom, value, addr, &status);
+ if (rc) {
+ /* Try resetting the bridge if FSI fails */
+ if (rc != -ENODEV && retries == 0) {
+ fsi_device_write(scom->fsi_dev, SCOM_FSI2PIB_RESET_REG,
+ &dummy, sizeof(uint32_t));
+ rc = -EBUSY;
+ } else
+ return rc;
+ } else
+ rc = handle_fsi2pib_status(scom, status);
+ if (rc && rc != -EBUSY)
+ break;
+ if (rc == 0) {
+ rc = handle_pib_status(scom,
+ (status & SCOM_STATUS_PIB_RESP_MASK)
+ >> SCOM_STATUS_PIB_RESP_SHIFT);
+ if (rc && rc != -EBUSY)
+ break;
+ }
+ if (rc == 0)
+ break;
+ msleep(1);
+ }
+ return rc;
+}
+
+static ssize_t scom_read(struct file *filep, char __user *buf, size_t len,
+ loff_t *offset)
+{
struct miscdevice *mdev =
(struct miscdevice *)filep->private_data;
struct scom_device *scom = to_scom_dev(mdev);
struct device *dev = &scom->fsi_dev->dev;
uint64_t val;
+ int rc;
if (len != sizeof(uint64_t))
return -EINVAL;
+ mutex_lock(&scom->lock);
rc = get_scom(scom, &val, *offset);
+ mutex_unlock(&scom->lock);
if (rc) {
dev_dbg(dev, "get_scom fail:%d\n", rc);
return rc;
@@ -130,7 +400,7 @@ static ssize_t scom_read(struct file *filep, char __user *buf, size_t len,
}
static ssize_t scom_write(struct file *filep, const char __user *buf,
- size_t len, loff_t *offset)
+ size_t len, loff_t *offset)
{
int rc;
struct miscdevice *mdev = filep->private_data;
@@ -147,7 +417,9 @@ static ssize_t scom_write(struct file *filep, const char __user *buf,
return -EINVAL;
}
+ mutex_lock(&scom->lock);
rc = put_scom(scom, val, *offset);
+ mutex_unlock(&scom->lock);
if (rc) {
dev_dbg(dev, "put_scom failed with:%d\n", rc);
return rc;
@@ -171,16 +443,129 @@ static loff_t scom_llseek(struct file *file, loff_t offset, int whence)
return offset;
}
+static void raw_convert_status(struct scom_access *acc, uint32_t status)
+{
+ acc->pib_status = (status & SCOM_STATUS_PIB_RESP_MASK) >>
+ SCOM_STATUS_PIB_RESP_SHIFT;
+ acc->intf_errors = 0;
+
+ if (status & SCOM_STATUS_PROTECTION)
+ acc->intf_errors |= SCOM_INTF_ERR_PROTECTION;
+ else if (status & SCOM_STATUS_PARITY)
+ acc->intf_errors |= SCOM_INTF_ERR_PARITY;
+ else if (status & SCOM_STATUS_PIB_ABORT)
+ acc->intf_errors |= SCOM_INTF_ERR_ABORT;
+ else if (status & SCOM_STATUS_ERR_SUMMARY)
+ acc->intf_errors |= SCOM_INTF_ERR_UNKNOWN;
+}
+
+static int scom_raw_read(struct scom_device *scom, void __user *argp)
+{
+ struct scom_access acc;
+ uint32_t status;
+ int rc;
+
+ if (copy_from_user(&acc, argp, sizeof(struct scom_access)))
+ return -EFAULT;
+
+ rc = raw_get_scom(scom, &acc.data, acc.addr, &status);
+ if (rc)
+ return rc;
+ raw_convert_status(&acc, status);
+ if (copy_to_user(argp, &acc, sizeof(struct scom_access)))
+ return -EFAULT;
+ return 0;
+}
+
+static int scom_raw_write(struct scom_device *scom, void __user *argp)
+{
+ u64 prev_data, mask, data;
+ struct scom_access acc;
+ uint32_t status;
+ int rc;
+
+ if (copy_from_user(&acc, argp, sizeof(struct scom_access)))
+ return -EFAULT;
+
+ if (acc.mask) {
+ rc = raw_get_scom(scom, &prev_data, acc.addr, &status);
+ if (rc)
+ return rc;
+ if (status & SCOM_STATUS_ANY_ERR)
+ goto fail;
+ mask = acc.mask;
+ } else {
+ prev_data = mask = -1ull;
+ }
+ data = (prev_data & ~mask) | (acc.data & mask);
+ rc = raw_put_scom(scom, data, acc.addr, &status);
+ if (rc)
+ return rc;
+ fail:
+ raw_convert_status(&acc, status);
+ if (copy_to_user(argp, &acc, sizeof(struct scom_access)))
+ return -EFAULT;
+ return 0;
+}
+
+static int scom_reset(struct scom_device *scom, void __user *argp)
+{
+ uint32_t flags, dummy = -1;
+ int rc = 0;
+
+ if (get_user(flags, (__u32 __user *)argp))
+ return -EFAULT;
+ if (flags & SCOM_RESET_PIB)
+ rc = fsi_device_write(scom->fsi_dev, SCOM_PIB_RESET_REG, &dummy,
+ sizeof(uint32_t));
+ if (!rc && (flags & (SCOM_RESET_PIB | SCOM_RESET_INTF)))
+ rc = fsi_device_write(scom->fsi_dev, SCOM_FSI2PIB_RESET_REG, &dummy,
+ sizeof(uint32_t));
+ return rc;
+}
+
+static int scom_check(struct scom_device *scom, void __user *argp)
+{
+ /* Still need to find out how to get "protected" */
+ return put_user(SCOM_CHECK_SUPPORTED, (__u32 __user *)argp);
+}
+
+static long scom_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ struct miscdevice *mdev = file->private_data;
+ struct scom_device *scom = to_scom_dev(mdev);
+ void __user *argp = (void __user *)arg;
+ int rc = -ENOTTY;
+
+ mutex_lock(&scom->lock);
+ switch(cmd) {
+ case FSI_SCOM_CHECK:
+ rc = scom_check(scom, argp);
+ break;
+ case FSI_SCOM_READ:
+ rc = scom_raw_read(scom, argp);
+ break;
+ case FSI_SCOM_WRITE:
+ rc = scom_raw_write(scom, argp);
+ break;
+ case FSI_SCOM_RESET:
+ rc = scom_reset(scom, argp);
+ break;
+ }
+ mutex_unlock(&scom->lock);
+ return rc;
+}
+
static const struct file_operations scom_fops = {
- .owner = THIS_MODULE,
- .llseek = scom_llseek,
- .read = scom_read,
- .write = scom_write,
+ .owner = THIS_MODULE,
+ .llseek = scom_llseek,
+ .read = scom_read,
+ .write = scom_write,
+ .unlocked_ioctl = scom_ioctl,
};
static int scom_probe(struct device *dev)
{
- uint32_t data;
struct fsi_device *fsi_dev = to_fsi_dev(dev);
struct scom_device *scom;
@@ -188,6 +573,7 @@ static int scom_probe(struct device *dev)
if (!scom)
return -ENOMEM;
+ mutex_init(&scom->lock);
scom->idx = ida_simple_get(&scom_ida, 1, INT_MAX, GFP_KERNEL);
snprintf(scom->name, sizeof(scom->name), "scom%d", scom->idx);
scom->fsi_dev = fsi_dev;
@@ -197,9 +583,6 @@ static int scom_probe(struct device *dev)
scom->mdev.parent = dev;
list_add(&scom->link, &scom_devices);
- data = cpu_to_be32(SCOM_RESET_CMD);
- fsi_device_write(fsi_dev, SCOM_RESET_REG, &data, sizeof(uint32_t));
-
return misc_register(&scom->mdev);
}
diff --git a/include/linux/fsi-sbefifo.h b/include/linux/fsi-sbefifo.h
new file mode 100644
index 0000000..13f9ebea
--- /dev/null
+++ b/include/linux/fsi-sbefifo.h
@@ -0,0 +1,33 @@
+/*
+ * SBEFIFO FSI Client device driver
+ *
+ * Copyright (C) IBM Corporation 2017
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERGCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef LINUX_FSI_SBEFIFO_H
+#define LINUX_FSI_SBEFIFO_H
+
+#define SBEFIFO_CMD_PUT_OCC_SRAM 0xa404
+#define SBEFIFO_CMD_GET_OCC_SRAM 0xa403
+#define SBEFIFO_CMD_GET_SBE_FFDC 0xa801
+
+#define SBEFIFO_MAX_FFDC_SIZE 0x2000
+
+struct device;
+
+int sbefifo_submit(struct device *dev, const __be32 *command, size_t cmd_len,
+ __be32 *response, size_t *resp_len);
+
+int sbefifo_parse_status(struct device *dev, u16 cmd, __be32 *response,
+ size_t resp_len, size_t *data_len);
+
+#endif /* LINUX_FSI_SBEFIFO_H */
diff --git a/include/trace/events/fsi_master_gpio.h b/include/trace/events/fsi_master_gpio.h
index f95cf32..70ef66e 100644
--- a/include/trace/events/fsi_master_gpio.h
+++ b/include/trace/events/fsi_master_gpio.h
@@ -50,6 +50,22 @@ TRACE_EVENT(fsi_master_gpio_out,
)
);
+TRACE_EVENT(fsi_master_gpio_clock_zeros,
+ TP_PROTO(const struct fsi_master_gpio *master, int clocks),
+ TP_ARGS(master, clocks),
+ TP_STRUCT__entry(
+ __field(int, master_idx)
+ __field(int, clocks)
+ ),
+ TP_fast_assign(
+ __entry->master_idx = master->master.idx;
+ __entry->clocks = clocks;
+ ),
+ TP_printk("fsi-gpio%d clock %d zeros",
+ __entry->master_idx, __entry->clocks
+ )
+);
+
TRACE_EVENT(fsi_master_gpio_break,
TP_PROTO(const struct fsi_master_gpio *master),
TP_ARGS(master),
@@ -64,6 +80,92 @@ TRACE_EVENT(fsi_master_gpio_break,
)
);
+TRACE_EVENT(fsi_master_gpio_crc_cmd_error,
+ TP_PROTO(const struct fsi_master_gpio *master),
+ TP_ARGS(master),
+ TP_STRUCT__entry(
+ __field(int, master_idx)
+ ),
+ TP_fast_assign(
+ __entry->master_idx = master->master.idx;
+ ),
+ TP_printk("fsi-gpio%d ----CRC command retry---",
+ __entry->master_idx
+ )
+);
+
+TRACE_EVENT(fsi_master_gpio_crc_rsp_error,
+ TP_PROTO(const struct fsi_master_gpio *master),
+ TP_ARGS(master),
+ TP_STRUCT__entry(
+ __field(int, master_idx)
+ ),
+ TP_fast_assign(
+ __entry->master_idx = master->master.idx;
+ ),
+ TP_printk("fsi-gpio%d ----CRC response---",
+ __entry->master_idx
+ )
+);
+
+TRACE_EVENT(fsi_master_gpio_poll_response_busy,
+ TP_PROTO(const struct fsi_master_gpio *master, int busy),
+ TP_ARGS(master, busy),
+ TP_STRUCT__entry(
+ __field(int, master_idx)
+ __field(int, busy)
+ ),
+ TP_fast_assign(
+ __entry->master_idx = master->master.idx;
+ __entry->busy = busy;
+ ),
+ TP_printk("fsi-gpio%d: device reported busy %d times",
+ __entry->master_idx, __entry->busy)
+);
+
+TRACE_EVENT(fsi_master_gpio_cmd_abs_addr,
+ TP_PROTO(const struct fsi_master_gpio *master, u32 addr),
+ TP_ARGS(master, addr),
+ TP_STRUCT__entry(
+ __field(int, master_idx)
+ __field(u32, addr)
+ ),
+ TP_fast_assign(
+ __entry->master_idx = master->master.idx;
+ __entry->addr = addr;
+ ),
+ TP_printk("fsi-gpio%d: Sending ABS_ADR %06x",
+ __entry->master_idx, __entry->addr)
+);
+
+TRACE_EVENT(fsi_master_gpio_cmd_rel_addr,
+ TP_PROTO(const struct fsi_master_gpio *master, u32 rel_addr),
+ TP_ARGS(master, rel_addr),
+ TP_STRUCT__entry(
+ __field(int, master_idx)
+ __field(u32, rel_addr)
+ ),
+ TP_fast_assign(
+ __entry->master_idx = master->master.idx;
+ __entry->rel_addr = rel_addr;
+ ),
+ TP_printk("fsi-gpio%d: Sending REL_ADR %03x",
+ __entry->master_idx, __entry->rel_addr)
+);
+
+TRACE_EVENT(fsi_master_gpio_cmd_same_addr,
+ TP_PROTO(const struct fsi_master_gpio *master),
+ TP_ARGS(master),
+ TP_STRUCT__entry(
+ __field(int, master_idx)
+ ),
+ TP_fast_assign(
+ __entry->master_idx = master->master.idx;
+ ),
+ TP_printk("fsi-gpio%d: Sending SAME_ADR",
+ __entry->master_idx)
+);
+
#endif /* _TRACE_FSI_MASTER_GPIO_H */
#include <trace/define_trace.h>
diff --git a/include/uapi/linux/fsi.h b/include/uapi/linux/fsi.h
new file mode 100644
index 0000000..da577ec
--- /dev/null
+++ b/include/uapi/linux/fsi.h
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+#ifndef _UAPI_LINUX_FSI_H
+#define _UAPI_LINUX_FSI_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+/*
+ * /dev/scom "raw" ioctl interface
+ *
+ * The driver supports a high level "read/write" interface which
+ * handles retries and converts the status to Linux error codes,
+ * however low level tools an debugger need to access the "raw"
+ * HW status information and interpret it themselves, so this
+ * ioctl interface is also provided for their use case.
+ */
+
+/* Structure for SCOM read/write */
+struct scom_access {
+ __u64 addr; /* SCOM address, supports indirect */
+ __u64 data; /* SCOM data (in for write, out for read) */
+ __u64 mask; /* Data mask for writes */
+ __u32 intf_errors; /* Interface error flags */
+#define SCOM_INTF_ERR_PARITY 0x00000001 /* Parity error */
+#define SCOM_INTF_ERR_PROTECTION 0x00000002 /* Blocked by secure boot */
+#define SCOM_INTF_ERR_ABORT 0x00000004 /* PIB reset during access */
+#define SCOM_INTF_ERR_UNKNOWN 0x80000000 /* Unknown error */
+ /*
+ * Note: Any other bit set in intf_errors need to be considered as an
+ * error. Future implementations may define new error conditions. The
+ * pib_status below is only valid if intf_errors is 0.
+ */
+ __u8 pib_status; /* 3-bit PIB status */
+#define SCOM_PIB_SUCCESS 0 /* Access successful */
+#define SCOM_PIB_BLOCKED 1 /* PIB blocked, pls retry */
+#define SCOM_PIB_OFFLINE 2 /* Chiplet offline */
+#define SCOM_PIB_PARTIAL 3 /* Partial good */
+#define SCOM_PIB_BAD_ADDR 4 /* Invalid address */
+#define SCOM_PIB_CLK_ERR 5 /* Clock error */
+#define SCOM_PIB_PARITY_ERR 6 /* Parity error on the PIB bus */
+#define SCOM_PIB_TIMEOUT 7 /* Bus timeout */
+ __u8 pad;
+};
+
+/* Flags for SCOM check */
+#define SCOM_CHECK_SUPPORTED 0x00000001 /* Interface supported */
+#define SCOM_CHECK_PROTECTED 0x00000002 /* Interface blocked by secure boot */
+
+/* Flags for SCOM reset */
+#define SCOM_RESET_INTF 0x00000001 /* Reset interface */
+#define SCOM_RESET_PIB 0x00000002 /* Reset PIB */
+
+#define FSI_SCOM_CHECK _IOR('s', 0x00, __u32)
+#define FSI_SCOM_READ _IOWR('s', 0x01, struct scom_access)
+#define FSI_SCOM_WRITE _IOWR('s', 0x02, struct scom_access)
+#define FSI_SCOM_RESET _IOW('s', 0x03, __u32)
+
+#endif /* _UAPI_LINUX_FSI_H */
