Merge branch 'next-samsung' into for-next
Conflicts:
arch/arm/mach-s5p6440/Kconfig
arch/arm/mach-s5p6442/Kconfig
arch/arm/mach-s5pc100/Kconfig
arch/arm/mach-s5pv210/Kconfig
arch/arm/mach-s5pv210/cpu.c
arch/arm/plat-samsung/include/plat/sdhci.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3e68a93..c797a8b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -634,6 +634,7 @@
select ARCH_HAS_CPUFREQ
select HAVE_CLK
select ARCH_USES_GETTIMEOFFSET
+ select HAVE_S3C2410_I2C
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@@ -663,6 +664,8 @@
select S3C_DEV_NAND
select USB_ARCH_HAS_OHCI
select SAMSUNG_GPIOLIB_4BIT
+ select HAVE_S3C2410_I2C
+ select HAVE_S3C2410_WATCHDOG
help
Samsung S3C64XX series based systems
@@ -671,7 +674,10 @@
select CPU_V6
select GENERIC_GPIO
select HAVE_CLK
+ select HAVE_S3C2410_WATCHDOG
select ARCH_USES_GETTIMEOFFSET
+ select HAVE_S3C2410_I2C
+ select HAVE_S3C_RTC
help
Samsung S5P6440 CPU based systems
@@ -681,6 +687,7 @@
select GENERIC_GPIO
select HAVE_CLK
select ARCH_USES_GETTIMEOFFSET
+ select HAVE_S3C2410_WATCHDOG
help
Samsung S5P6442 CPU based systems
@@ -691,6 +698,9 @@
select CPU_V7
select ARM_L1_CACHE_SHIFT_6
select ARCH_USES_GETTIMEOFFSET
+ select HAVE_S3C2410_I2C
+ select HAVE_S3C_RTC
+ select HAVE_S3C2410_WATCHDOG
help
Samsung S5PC100 series based systems
@@ -701,6 +711,9 @@
select HAVE_CLK
select ARM_L1_CACHE_SHIFT_6
select ARCH_USES_GETTIMEOFFSET
+ select HAVE_S3C2410_I2C
+ select HAVE_S3C_RTC
+ select HAVE_S3C2410_WATCHDOG
help
Samsung S5PV210/S5PC110 series based systems
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index f5a5972..071e8a1 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -57,11 +57,21 @@
help
Common setup code for i2c bus 1.
+config S3C64XX_SETUP_IDE
+ bool
+ help
+ Common setup code for S3C64XX IDE.
+
config S3C64XX_SETUP_FB_24BPP
bool
help
Common setup code for S3C64XX with an 24bpp RGB display helper.
+config S3C64XX_SETUP_KEYPAD
+ bool
+ help
+ Common setup code for S3C64XX KEYPAD GPIO configurations
+
config S3C64XX_SETUP_SDHCI_GPIO
bool
help
@@ -95,15 +105,20 @@
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_I2C1
+ select SAMSUNG_DEV_IDE
select S3C_DEV_FB
+ select S3C_DEV_RTC
select SAMSUNG_DEV_TS
select S3C_DEV_USB_HOST
select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
+ select SAMSUNG_DEV_KEYPAD
select HAVE_S3C2410_WATCHDOG
select S3C64XX_SETUP_SDHCI
select S3C64XX_SETUP_I2C1
+ select S3C64XX_SETUP_IDE
select S3C64XX_SETUP_FB_24BPP
+ select S3C64XX_SETUP_KEYPAD
help
Machine support for the Samsung SMDK6410
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 9d10069..48d3dfa 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -35,6 +35,8 @@
obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S3C64XX_SETUP_IDE) += setup-ide.o
+obj-$(CONFIG_S3C64XX_SETUP_KEYPAD) += setup-keypad.o
obj-$(CONFIG_S3C64XX_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index fbd85a9..7e03f0a 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -133,6 +133,12 @@
.id = -1,
.parent = &clk_h,
}, {
+ .name = "rtc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C_CLKCON_PCLK_RTC,
+ }, {
.name = "adc",
.id = -1,
.parent = &clk_p,
@@ -165,6 +171,12 @@
.ctrlbit = S3C6410_CLKCON_PCLK_IIS2,
}, {
#endif
+ .name = "keypad",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C_CLKCON_PCLK_KEYPAD,
+ }, {
.name = "spi",
.id = 0,
.parent = &clk_p,
@@ -295,12 +307,6 @@
.enable = s3c64xx_pclk_ctrl,
.ctrlbit = S3C_CLKCON_PCLK_UART3,
}, {
- .name = "rtc",
- .id = -1,
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_RTC,
- }, {
.name = "watchdog",
.id = -1,
.parent = &clk_p,
@@ -310,6 +316,12 @@
.id = -1,
.parent = &clk_p,
.ctrlbit = S3C_CLKCON_PCLK_AC97,
+ }, {
+ .name = "cfcon",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_IHOST,
}
};
diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c
index c3e9e73..9648fbc 100644
--- a/arch/arm/mach-s3c64xx/dev-audio.c
+++ b/arch/arm/mach-s3c64xx/dev-audio.c
@@ -12,11 +12,11 @@
#include <linux/string.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <mach/irqs.h>
#include <mach/map.h>
#include <mach/dma.h>
-#include <mach/gpio.h>
#include <plat/devs.h>
#include <plat/audio.h>
diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c
index 29c32d0..a492b98 100644
--- a/arch/arm/mach-s3c64xx/dev-spi.c
+++ b/arch/arm/mach-s3c64xx/dev-spi.c
@@ -12,10 +12,10 @@
#include <linux/string.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <mach/dma.h>
#include <mach/map.h>
-#include <mach/gpio.h>
#include <mach/gpio-bank-c.h>
#include <mach/spi-clocks.h>
diff --git a/arch/arm/mach-s3c64xx/gpiolib.c b/arch/arm/mach-s3c64xx/gpiolib.c
index 60c929a..300dee4 100644
--- a/arch/arm/mach-s3c64xx/gpiolib.c
+++ b/arch/arm/mach-s3c64xx/gpiolib.c
@@ -15,9 +15,9 @@
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <linux/gpio.h>
#include <mach/map.h>
-#include <mach/gpio.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h
index e1eab3c..a1f13f0 100644
--- a/arch/arm/mach-s3c64xx/include/mach/map.h
+++ b/arch/arm/mach-s3c64xx/include/mach/map.h
@@ -67,6 +67,7 @@
#define S3C64XX_PA_USB_HSOTG (0x7C000000)
#define S3C64XX_PA_WATCHDOG (0x7E004000)
#define S3C64XX_PA_RTC (0x7E005000)
+#define S3C64XX_PA_KEYPAD (0x7E00A000)
#define S3C64XX_PA_ADC (0x7E00B000)
#define S3C64XX_PA_SYSCON (0x7E00F000)
#define S3C64XX_PA_AC97 (0x7F001000)
@@ -86,6 +87,9 @@
#define S3C64XX_SZ_GPIO SZ_4K
#define S3C64XX_PA_SDRAM (0x50000000)
+
+#define S3C64XX_PA_CFCON (0x70300000)
+
#define S3C64XX_PA_VIC0 (0x71200000)
#define S3C64XX_PA_VIC1 (0x71300000)
@@ -120,5 +124,7 @@
#define S3C_PA_WDT S3C64XX_PA_WATCHDOG
#define SAMSUNG_PA_ADC S3C64XX_PA_ADC
+#define SAMSUNG_PA_CFCON S3C64XX_PA_CFCON
+#define SAMSUNG_PA_KEYPAD S3C64XX_PA_KEYPAD
#endif /* __ASM_ARCH_6400_MAP_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
index 0114eb0..05332b9 100644
--- a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
@@ -34,6 +34,7 @@
#define S3C_SCLK_GATE S3C_CLKREG(0x38)
#define S3C_MEM0_GATE S3C_CLKREG(0x3C)
#define S3C6410_CLK_SRC2 S3C_CLKREG(0x10C)
+#define S3C_MEM_SYS_CFG S3C_CLKREG(0x120)
/* CLKDIV0 */
#define S3C6400_CLKDIV0_PCLK_MASK (0xf << 12)
@@ -154,4 +155,8 @@
#define S3C6400_CLKSRC_EPLL_MOUT_SHIFT (2)
#define S3C6400_CLKSRC_MFC (1 << 4)
+/* MEM_SYS_CFG */
+#define MEM_SYS_CFG_INDEP_CF 0x4000
+#define MEM_SYS_CFG_EBI_FIX_PRI_CFCON 0x30
+
#endif /* _PLAT_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index d9a0355..b5d7861 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -17,6 +17,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/input.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
@@ -56,6 +57,7 @@
#include <mach/regs-gpio.h>
#include <mach/regs-sys.h>
#include <mach/regs-srom.h>
+#include <plat/ata.h>
#include <plat/iic.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
@@ -66,6 +68,7 @@
#include <plat/cpu.h>
#include <plat/adc.h>
#include <plat/ts.h>
+#include <plat/keypad.h>
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
@@ -242,6 +245,29 @@
};
#endif
+static struct s3c_ide_platdata smdk6410_ide_pdata __initdata = {
+ .setup_gpio = s3c64xx_ide_setup_gpio,
+};
+
+static uint32_t smdk6410_keymap[] __initdata = {
+ /* KEY(row, col, keycode) */
+ KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
+ KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
+ KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
+ KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
+};
+
+static struct matrix_keymap_data smdk6410_keymap_data __initdata = {
+ .keymap = smdk6410_keymap,
+ .keymap_size = ARRAY_SIZE(smdk6410_keymap),
+};
+
+static struct samsung_keypad_platdata smdk6410_keypad_data __initdata = {
+ .keymap_data = &smdk6410_keymap_data,
+ .rows = 2,
+ .cols = 8,
+};
+
static struct map_desc smdk6410_iodesc[] = {};
static struct platform_device *smdk6410_devices[] __initdata = {
@@ -257,6 +283,7 @@
&s3c_device_ohci,
&s3c_device_usb_hsotg,
&s3c64xx_device_iisv4,
+ &samsung_device_keypad,
#ifdef CONFIG_REGULATOR
&smdk6410_b_pwr_5v,
@@ -265,6 +292,8 @@
&smdk6410_smsc911x,
&s3c_device_adc,
+ &s3c_device_cfcon,
+ &s3c_device_rtc,
&s3c_device_ts,
&s3c_device_wdt,
};
@@ -636,6 +665,8 @@
s3c_i2c1_set_platdata(NULL);
s3c_fb_set_platdata(&smdk6410_lcd_pdata);
+ samsung_keypad_set_platdata(&smdk6410_keypad_data);
+
s3c24xx_ts_set_platdata(&s3c_ts_platform);
/* configure nCS1 width to 16 bits */
@@ -665,6 +696,8 @@
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
+ s3c_ide_set_platdata(&smdk6410_ide_pdata);
+
platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
}
diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c
index 014401c..312aa6b 100644
--- a/arch/arm/mach-s3c64xx/s3c6410.c
+++ b/arch/arm/mach-s3c64xx/s3c6410.c
@@ -37,8 +37,9 @@
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/sdhci.h>
+#include <plat/ata-core.h>
+#include <plat/adc-core.h>
#include <plat/iic-core.h>
-#include <plat/adc.h>
#include <plat/onenand-core.h>
#include <mach/s3c6400.h>
#include <mach/s3c6410.h>
@@ -54,10 +55,11 @@
s3c_i2c0_setname("s3c2440-i2c");
s3c_i2c1_setname("s3c2440-i2c");
- s3c_device_adc.name = "s3c64xx-adc";
+ s3c_adc_setname("s3c64xx-adc");
s3c_device_nand.name = "s3c6400-nand";
s3c_onenand_setname("s3c6410-onenand");
s3c64xx_onenand1_setname("s3c6410-onenand");
+ s3c_cfcon_setname("s3c64xx-pata");
}
void __init s3c6410_init_clocks(int xtal)
diff --git a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
index 8e28e44..0007368 100644
--- a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
+++ b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
@@ -15,9 +15,9 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/fb.h>
+#include <linux/gpio.h>
#include <mach/regs-fb.h>
-#include <mach/gpio.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
diff --git a/arch/arm/mach-s3c64xx/setup-i2c0.c b/arch/arm/mach-s3c64xx/setup-i2c0.c
index d1b11e6..406192a 100644
--- a/arch/arm/mach-s3c64xx/setup-i2c0.c
+++ b/arch/arm/mach-s3c64xx/setup-i2c0.c
@@ -14,10 +14,10 @@
#include <linux/kernel.h>
#include <linux/types.h>
+#include <linux/gpio.h>
struct platform_device; /* don't need the contents */
-#include <mach/gpio.h>
#include <mach/gpio-bank-b.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
diff --git a/arch/arm/mach-s3c64xx/setup-i2c1.c b/arch/arm/mach-s3c64xx/setup-i2c1.c
index 2dce57d..1ee62c9 100644
--- a/arch/arm/mach-s3c64xx/setup-i2c1.c
+++ b/arch/arm/mach-s3c64xx/setup-i2c1.c
@@ -14,10 +14,10 @@
#include <linux/kernel.h>
#include <linux/types.h>
+#include <linux/gpio.h>
struct platform_device; /* don't need the contents */
-#include <mach/gpio.h>
#include <mach/gpio-bank-b.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
diff --git a/arch/arm/mach-s3c64xx/setup-ide.c b/arch/arm/mach-s3c64xx/setup-ide.c
new file mode 100644
index 0000000..c12c315
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/setup-ide.c
@@ -0,0 +1,46 @@
+/* linux/arch/arm/mach-s3c64xx/setup-ide.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S3C64XX setup information for IDE
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <plat/gpio-cfg.h>
+
+void s3c64xx_ide_setup_gpio(void)
+{
+ u32 reg;
+ u32 gpio = 0;
+
+ reg = readl(S3C_MEM_SYS_CFG) & (~0x3f);
+
+ /* Independent CF interface, CF chip select configuration */
+ writel(reg | MEM_SYS_CFG_INDEP_CF |
+ MEM_SYS_CFG_EBI_FIX_PRI_CFCON, S3C_MEM_SYS_CFG);
+
+ s3c_gpio_cfgpin(S3C64XX_GPB(4), S3C_GPIO_SFN(4));
+
+ /* Set XhiDATA[15:0] pins as CF Data[15:0] */
+ for (gpio = S3C64XX_GPK(0); gpio <= S3C64XX_GPK(15); gpio++)
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(5));
+
+ /* Set XhiADDR[2:0] pins as CF ADDR[2:0] */
+ for (gpio = S3C64XX_GPL(0); gpio <= S3C64XX_GPL(2); gpio++)
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(6));
+
+ /* Set Xhi ctrl pins as CF ctrl pins(IORDY, IOWR, IORD, CE[0:1]) */
+ s3c_gpio_cfgpin(S3C64XX_GPM(5), S3C_GPIO_SFN(1));
+ for (gpio = S3C64XX_GPM(0); gpio <= S3C64XX_GPM(4); gpio++)
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(6));
+}
diff --git a/arch/arm/mach-s3c64xx/setup-keypad.c b/arch/arm/mach-s3c64xx/setup-keypad.c
new file mode 100644
index 0000000..abc34e4
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/setup-keypad.c
@@ -0,0 +1,34 @@
+/* linux/arch/arm/mach-s3c64xx/setup-keypad.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * GPIO configuration for S3C64XX KeyPad device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/gpio.h>
+#include <plat/gpio-cfg.h>
+
+void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
+{
+ unsigned int gpio;
+ unsigned int end;
+
+ /* Set all the necessary GPK pins to special-function 3: KP_ROW[x] */
+ end = S3C64XX_GPK(8 + rows);
+ for (gpio = S3C64XX_GPK(8); gpio < end; gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+
+ /* Set all the necessary GPL pins to special-function 3: KP_COL[x] */
+ end = S3C64XX_GPL(0 + cols);
+ for (gpio = S3C64XX_GPL(0); gpio < end; gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+}
diff --git a/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c b/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
index a58c0cc..3223595 100644
--- a/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
+++ b/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
@@ -16,12 +16,14 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/gpio.h>
-#include <mach/gpio.h>
#include <plat/gpio-cfg.h>
+#include <plat/sdhci.h>
void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
unsigned int gpio;
unsigned int end;
@@ -33,12 +35,15 @@
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
- s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
+ }
}
void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
unsigned int gpio;
unsigned int end;
@@ -50,8 +55,10 @@
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
- s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
+ }
}
void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
diff --git a/arch/arm/mach-s5p6440/Kconfig b/arch/arm/mach-s5p6440/Kconfig
index 153f8c9..6a4af7f 100644
--- a/arch/arm/mach-s5p6440/Kconfig
+++ b/arch/arm/mach-s5p6440/Kconfig
@@ -21,13 +21,11 @@
config MACH_SMDK6440
bool "SMDK6440"
select CPU_S5P6440
- select SAMSUNG_DEV_TS
- select SAMSUNG_DEV_ADC
- select S3C_DEV_RTC
select S3C_DEV_I2C1
+ select S3C_DEV_RTC
select S3C_DEV_WDT
- select HAVE_S3C_RTC
- select HAVE_S3C2410_WATCHDOG
+ select SAMSUNG_DEV_ADC
+ select SAMSUNG_DEV_TS
select S5P6440_SETUP_I2C1
help
Machine support for the Samsung SMDK6440
diff --git a/arch/arm/mach-s5p6440/cpu.c b/arch/arm/mach-s5p6440/cpu.c
index b2fe6a5..526f33a 100644
--- a/arch/arm/mach-s5p6440/cpu.c
+++ b/arch/arm/mach-s5p6440/cpu.c
@@ -37,6 +37,7 @@
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/s5p6440.h>
+#include <plat/adc-core.h>
static void s5p6440_idle(void)
{
@@ -61,7 +62,7 @@
void __init s5p6440_map_io(void)
{
/* initialize any device information early */
- s3c_device_adc.name = "s3c64xx-adc";
+ s3c_adc_setname("s3c64xx-adc");
}
void __init s5p6440_init_clocks(int xtal)
diff --git a/arch/arm/mach-s5p6440/dev-audio.c b/arch/arm/mach-s5p6440/dev-audio.c
index 0c53679..3ca0d2b 100644
--- a/arch/arm/mach-s5p6440/dev-audio.c
+++ b/arch/arm/mach-s5p6440/dev-audio.c
@@ -10,11 +10,11 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
#include <plat/audio.h>
-#include <mach/gpio.h>
#include <mach/map.h>
#include <mach/dma.h>
#include <mach/irqs.h>
diff --git a/arch/arm/mach-s5p6440/dev-spi.c b/arch/arm/mach-s5p6440/dev-spi.c
index 0a30280..510af44 100644
--- a/arch/arm/mach-s5p6440/dev-spi.c
+++ b/arch/arm/mach-s5p6440/dev-spi.c
@@ -10,11 +10,11 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <mach/dma.h>
#include <mach/map.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
#include <mach/spi-clocks.h>
#include <plat/s3c64xx-spi.h>
diff --git a/arch/arm/mach-s5p6440/gpio.c b/arch/arm/mach-s5p6440/gpio.c
index 92efc05..8bf6e0c 100644
--- a/arch/arm/mach-s5p6440/gpio.c
+++ b/arch/arm/mach-s5p6440/gpio.c
@@ -13,9 +13,11 @@
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <linux/gpio.h>
+
#include <mach/map.h>
-#include <mach/gpio.h>
#include <mach/regs-gpio.h>
+
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
diff --git a/arch/arm/mach-s5p6442/Kconfig b/arch/arm/mach-s5p6442/Kconfig
index 7cd2843..0fda0a5 100644
--- a/arch/arm/mach-s5p6442/Kconfig
+++ b/arch/arm/mach-s5p6442/Kconfig
@@ -20,7 +20,6 @@
bool "SMDK6442"
select CPU_S5P6442
select S3C_DEV_WDT
- select HAVE_S3C2410_WATCHDOG
help
Machine support for Samsung SMDK6442
diff --git a/arch/arm/mach-s5p6442/dev-audio.c b/arch/arm/mach-s5p6442/dev-audio.c
index cb801e1..7a4e347 100644
--- a/arch/arm/mach-s5p6442/dev-audio.c
+++ b/arch/arm/mach-s5p6442/dev-audio.c
@@ -10,11 +10,11 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
#include <plat/audio.h>
-#include <mach/gpio.h>
#include <mach/map.h>
#include <mach/dma.h>
#include <mach/irqs.h>
diff --git a/arch/arm/mach-s5p6442/dev-spi.c b/arch/arm/mach-s5p6442/dev-spi.c
index 3019952..e894651 100644
--- a/arch/arm/mach-s5p6442/dev-spi.c
+++ b/arch/arm/mach-s5p6442/dev-spi.c
@@ -10,11 +10,11 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <mach/dma.h>
#include <mach/map.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
#include <mach/spi-clocks.h>
#include <plat/s3c64xx-spi.h>
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index 25ca7c68..ab038d0 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -49,24 +49,22 @@
config MACH_SMDKC100
bool "SMDKC100"
select CPU_S5PC100
- select SAMSUNG_DEV_ADC
select S3C_DEV_FB
- select S3C_DEV_I2C1
- select SAMSUNG_DEV_IDE
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
- select SAMSUNG_DEV_KEYPAD
+ select S3C_DEV_I2C1
select S3C_DEV_RTC
- select SAMSUNG_DEV_TS
select S3C_DEV_WDT
- select HAVE_S3C2410_WATCHDOG
+ select SAMSUNG_DEV_ADC
+ select SAMSUNG_DEV_IDE
+ select SAMSUNG_DEV_KEYPAD
+ select SAMSUNG_DEV_TS
select S5PC100_SETUP_FB_24BPP
select S5PC100_SETUP_I2C1
select S5PC100_SETUP_IDE
select S5PC100_SETUP_KEYPAD
select S5PC100_SETUP_SDHCI
- select HAVE_S3C_RTC
help
Machine support for the Samsung SMDKC100
diff --git a/arch/arm/mach-s5pc100/dev-audio.c b/arch/arm/mach-s5pc100/dev-audio.c
index 18cfe9a..a699ed6a 100644
--- a/arch/arm/mach-s5pc100/dev-audio.c
+++ b/arch/arm/mach-s5pc100/dev-audio.c
@@ -10,11 +10,11 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
#include <plat/audio.h>
-#include <mach/gpio.h>
#include <mach/map.h>
#include <mach/dma.h>
#include <mach/irqs.h>
diff --git a/arch/arm/mach-s5pc100/dev-spi.c b/arch/arm/mach-s5pc100/dev-spi.c
index 14618c3..a0ef7c3 100644
--- a/arch/arm/mach-s5pc100/dev-spi.c
+++ b/arch/arm/mach-s5pc100/dev-spi.c
@@ -10,10 +10,10 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <mach/dma.h>
#include <mach/map.h>
-#include <mach/gpio.h>
#include <mach/spi-clocks.h>
#include <plat/s3c64xx-spi.h>
diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
index c018697..01b9134 100644
--- a/arch/arm/mach-s5pc100/include/mach/map.h
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -99,6 +99,10 @@
#define S5PC100_PA_FB (0xEE000000)
+#define S5PC100_PA_FIMC0 (0xEE200000)
+#define S5PC100_PA_FIMC1 (0xEE300000)
+#define S5PC100_PA_FIMC2 (0xEE400000)
+
#define S5PC100_PA_I2S0 (0xF2000000)
#define S5PC100_PA_I2S1 (0xF2100000)
#define S5PC100_PA_I2S2 (0xF2200000)
@@ -148,4 +152,8 @@
#define SAMSUNG_PA_CFCON S5PC100_PA_CFCON
#define SAMSUNG_PA_KEYPAD S5PC100_PA_KEYPAD
+#define S5P_PA_FIMC0 S5PC100_PA_FIMC0
+#define S5P_PA_FIMC1 S5PC100_PA_FIMC1
+#define S5P_PA_FIMC2 S5PC100_PA_FIMC2
+
#endif /* __ASM_ARCH_C100_MAP_H */
diff --git a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
index 7769c76..dc7208c 100644
--- a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
+++ b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
@@ -20,9 +20,11 @@
#include <plat/gpio-cfg.h>
#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
unsigned int gpio;
unsigned int end;
unsigned int num;
@@ -47,12 +49,15 @@
}
}
- s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PC100_GPG1(2), S3C_GPIO_SFN(2));
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PC100_GPG1(2), S3C_GPIO_SFN(2));
+ }
}
void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
unsigned int gpio;
unsigned int end;
@@ -64,12 +69,15 @@
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
- s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PC100_GPG2(6), S3C_GPIO_SFN(2));
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PC100_GPG2(6), S3C_GPIO_SFN(2));
+ }
}
void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
unsigned int gpio;
unsigned int end;
@@ -81,6 +89,8 @@
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
- s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PC100_GPG3(6), S3C_GPIO_SFN(2));
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PC100_GPG3(6), S3C_GPIO_SFN(2));
+ }
}
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 9b84abf..ea9d147 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -53,19 +53,24 @@
help
Common setup code for SDHCI gpio.
+config S5PC110_DEV_ONENAND
+ bool
+ help
+ Compile in platform device definition for OneNAND1 controller
+
menu "S5PC110 Machines"
config MACH_AQUILA
bool "Aquila"
select CPU_S5PV210
select ARCH_SPARSEMEM_ENABLE
- select S5PV210_SETUP_FB_24BPP
- select S5PV210_SETUP_SDHCI
select S3C_DEV_FB
- select S5PC110_DEV_ONENAND
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
+ select S5PC110_DEV_ONENAND
+ select S5PV210_SETUP_FB_24BPP
+ select S5PV210_SETUP_SDHCI
help
Machine support for the Samsung Aquila target based on S5PC110 SoC
@@ -73,13 +78,13 @@
bool "GONI"
select CPU_S5PV210
select ARCH_SPARSEMEM_ENABLE
- select S5PV210_SETUP_FB_24BPP
- select S5PV210_SETUP_SDHCI
select S3C_DEV_FB
- select S5PC110_DEV_ONENAND
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
+ select S5PC110_DEV_ONENAND
+ select S5PV210_SETUP_FB_24BPP
+ select S5PV210_SETUP_SDHCI
help
Machine support for Samsung GONI board
S5PC110(MCP) is one of package option of S5PV210
@@ -90,11 +95,9 @@
select ARCH_SPARSEMEM_ENABLE
select S3C_DEV_I2C1
select S3C_DEV_I2C2
- select SAMSUNG_DEV_IDE
select S3C_DEV_RTC
select S3C_DEV_WDT
- select HAVE_S3C_RTC
- select HAVE_S3C2410_WATCHDOG
+ select SAMSUNG_DEV_IDE
select S5PV210_SETUP_I2C1
select S5PV210_SETUP_I2C2
select S5PV210_SETUP_IDE
@@ -104,31 +107,24 @@
endmenu
-config S5PC110_DEV_ONENAND
- bool
- help
- Compile in platform device definition for OneNAND1 controller
-
menu "S5PV210 Machines"
config MACH_SMDKV210
bool "SMDKV210"
select CPU_S5PV210
select ARCH_SPARSEMEM_ENABLE
- select SAMSUNG_DEV_ADC
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S3C_DEV_I2C1
select S3C_DEV_I2C2
+ select S3C_DEV_RTC
+ select S3C_DEV_WDT
+ select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_IDE
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_TS
- select S3C_DEV_RTC
- select S3C_DEV_WDT
- select HAVE_S3C_RTC
- select HAVE_S3C2410_WATCHDOG
select S5PV210_SETUP_I2C1
select S5PV210_SETUP_I2C2
select S5PV210_SETUP_IDE
diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c
index ede1637..c7e0b8a 100644
--- a/arch/arm/mach-s5pv210/cpu.c
+++ b/arch/arm/mach-s5pv210/cpu.c
@@ -32,7 +32,9 @@
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/s5pv210.h>
+#include <plat/adc-core.h>
#include <plat/ata-core.h>
+#include <plat/fimc-core.h>
#include <plat/iic-core.h>
#include <plat/keypad-core.h>
#include <plat/sdhci.h>
@@ -84,9 +86,6 @@
void __init s5pv210_map_io(void)
{
-#ifdef CONFIG_S3C_DEV_ADC
- s3c_device_adc.name = "s3c64xx-adc";
-#endif
iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc));
/* initialise device information early */
@@ -95,8 +94,14 @@
s5pv210_default_sdhci2();
s5pv210_default_sdhci3();
+ s3c_adc_setname("s3c64xx-adc");
+
s3c_cfcon_setname("s5pv210-pata");
+ s3c_fimc_setname(0, "s5pv210-fimc");
+ s3c_fimc_setname(1, "s5pv210-fimc");
+ s3c_fimc_setname(2, "s5pv210-fimc");
+
/* the i2c devices are directly compatible with s3c2440 */
s3c_i2c0_setname("s3c2440-i2c");
s3c_i2c1_setname("s3c2440-i2c");
diff --git a/arch/arm/mach-s5pv210/dev-audio.c b/arch/arm/mach-s5pv210/dev-audio.c
index 6e21533..21dc6cf 100644
--- a/arch/arm/mach-s5pv210/dev-audio.c
+++ b/arch/arm/mach-s5pv210/dev-audio.c
@@ -10,11 +10,11 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
#include <plat/audio.h>
-#include <mach/gpio.h>
#include <mach/map.h>
#include <mach/dma.h>
#include <mach/irqs.h>
diff --git a/arch/arm/mach-s5pv210/dev-spi.c b/arch/arm/mach-s5pv210/dev-spi.c
index 337a62b..826cdbc 100644
--- a/arch/arm/mach-s5pv210/dev-spi.c
+++ b/arch/arm/mach-s5pv210/dev-spi.c
@@ -10,11 +10,11 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#include <mach/dma.h>
#include <mach/map.h>
#include <mach/irqs.h>
-#include <mach/gpio.h>
#include <mach/spi-clocks.h>
#include <plat/s3c64xx-spi.h>
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
index 986b285..dd4fb6b 100644
--- a/arch/arm/mach-s5pv210/include/mach/map.h
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -65,6 +65,10 @@
#define S5PV210_PA_FB (0xF8000000)
+#define S5PV210_PA_FIMC0 (0xFB200000)
+#define S5PV210_PA_FIMC1 (0xFB300000)
+#define S5PV210_PA_FIMC2 (0xFB400000)
+
#define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000))
#define S5PV210_PA_VIC0 (0xF2000000)
@@ -109,6 +113,9 @@
#define S3C_PA_FB S5PV210_PA_FB
#define S3C_PA_RTC S5PV210_PA_RTC
#define S3C_PA_WDT S5PV210_PA_WATCHDOG
+#define S5P_PA_FIMC0 S5PV210_PA_FIMC0
+#define S5P_PA_FIMC1 S5PV210_PA_FIMC1
+#define S5P_PA_FIMC2 S5PV210_PA_FIMC2
#define SAMSUNG_PA_ADC S5PV210_PA_ADC
#define SAMSUNG_PA_CFCON S5PV210_PA_CFCON
diff --git a/arch/arm/mach-s5pv210/setup-fb-24bpp.c b/arch/arm/mach-s5pv210/setup-fb-24bpp.c
index a50cbac..928cf1f 100644
--- a/arch/arm/mach-s5pv210/setup-fb-24bpp.c
+++ b/arch/arm/mach-s5pv210/setup-fb-24bpp.c
@@ -13,9 +13,9 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/fb.h>
+#include <linux/gpio.h>
#include <mach/regs-fb.h>
-#include <mach/gpio.h>
#include <mach/map.h>
#include <plat/fb.h>
#include <mach/regs-clock.h>
diff --git a/arch/arm/mach-s5pv210/setup-i2c0.c b/arch/arm/mach-s5pv210/setup-i2c0.c
index c718253c..d38f7cb 100644
--- a/arch/arm/mach-s5pv210/setup-i2c0.c
+++ b/arch/arm/mach-s5pv210/setup-i2c0.c
@@ -14,10 +14,10 @@
#include <linux/kernel.h>
#include <linux/types.h>
+#include <linux/gpio.h>
struct platform_device; /* don't need the contents */
-#include <mach/gpio.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
diff --git a/arch/arm/mach-s5pv210/setup-i2c1.c b/arch/arm/mach-s5pv210/setup-i2c1.c
index 45e0e6e..148bb78 100644
--- a/arch/arm/mach-s5pv210/setup-i2c1.c
+++ b/arch/arm/mach-s5pv210/setup-i2c1.c
@@ -14,10 +14,10 @@
#include <linux/kernel.h>
#include <linux/types.h>
+#include <linux/gpio.h>
struct platform_device; /* don't need the contents */
-#include <mach/gpio.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
diff --git a/arch/arm/mach-s5pv210/setup-i2c2.c b/arch/arm/mach-s5pv210/setup-i2c2.c
index b11b4bf..2396cb8 100644
--- a/arch/arm/mach-s5pv210/setup-i2c2.c
+++ b/arch/arm/mach-s5pv210/setup-i2c2.c
@@ -14,10 +14,10 @@
#include <linux/kernel.h>
#include <linux/types.h>
+#include <linux/gpio.h>
struct platform_device; /* don't need the contents */
-#include <mach/gpio.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
diff --git a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
index 143bfec..9f0f63d 100644
--- a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
+++ b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
@@ -15,15 +15,17 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/gpio.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
-#include <mach/gpio.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
unsigned int gpio;
/* Set all the necessary GPG0/GPG1 pins to special-function 2 */
@@ -48,12 +50,15 @@
break;
}
- s3c_gpio_setpull(S5PV210_GPG0(2), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PV210_GPG0(2), S3C_GPIO_SFN(2));
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ s3c_gpio_setpull(S5PV210_GPG0(2), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PV210_GPG0(2), S3C_GPIO_SFN(2));
+ }
}
void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
unsigned int gpio;
/* Set all the necessary GPG1[0:1] pins to special-function 2 */
@@ -68,12 +73,15 @@
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
- s3c_gpio_setpull(S5PV210_GPG1(2), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PV210_GPG1(2), S3C_GPIO_SFN(2));
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ s3c_gpio_setpull(S5PV210_GPG1(2), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PV210_GPG1(2), S3C_GPIO_SFN(2));
+ }
}
void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
unsigned int gpio;
/* Set all the necessary GPG2[0:1] pins to special-function 2 */
@@ -99,8 +107,10 @@
break;
}
- s3c_gpio_setpull(S5PV210_GPG2(2), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S5PV210_GPG2(2), S3C_GPIO_SFN(2));
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ s3c_gpio_setpull(S5PV210_GPG2(2), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PV210_GPG2(2), S3C_GPIO_SFN(2));
+ }
}
void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width)
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
index 7e34194..b2e0296 100644
--- a/arch/arm/plat-s5p/Makefile
+++ b/arch/arm/plat-s5p/Makefile
@@ -19,3 +19,8 @@
obj-y += irq.o
obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o
+# devices
+
+obj-$(CONFIG_S5P_DEV_FIMC0) += dev-fimc0.o
+obj-$(CONFIG_S5P_DEV_FIMC1) += dev-fimc1.o
+obj-$(CONFIG_S5P_DEV_FIMC2) += dev-fimc2.o
diff --git a/arch/arm/plat-s5p/dev-fimc0.c b/arch/arm/plat-s5p/dev-fimc0.c
new file mode 100644
index 0000000..d3f1a9b
--- /dev/null
+++ b/arch/arm/plat-s5p/dev-fimc0.c
@@ -0,0 +1,36 @@
+/* linux/arch/arm/plat-s5p/dev-fimc0.c
+ *
+ * Copyright (c) 2010 Samsung Electronics
+ *
+ * Base S5P FIMC0 resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <mach/map.h>
+
+static struct resource s5p_fimc0_resource[] = {
+ [0] = {
+ .start = S5P_PA_FIMC0,
+ .end = S5P_PA_FIMC0 + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_FIMC0,
+ .end = IRQ_FIMC0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device s5p_device_fimc0 = {
+ .name = "s5p-fimc",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s5p_fimc0_resource),
+ .resource = s5p_fimc0_resource,
+};
diff --git a/arch/arm/plat-s5p/dev-fimc1.c b/arch/arm/plat-s5p/dev-fimc1.c
new file mode 100644
index 0000000..41bd698
--- /dev/null
+++ b/arch/arm/plat-s5p/dev-fimc1.c
@@ -0,0 +1,36 @@
+/* linux/arch/arm/plat-s5p/dev-fimc1.c
+ *
+ * Copyright (c) 2010 Samsung Electronics
+ *
+ * Base S5P FIMC1 resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <mach/map.h>
+
+static struct resource s5p_fimc1_resource[] = {
+ [0] = {
+ .start = S5P_PA_FIMC1,
+ .end = S5P_PA_FIMC1 + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_FIMC1,
+ .end = IRQ_FIMC1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device s5p_device_fimc1 = {
+ .name = "s5p-fimc",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s5p_fimc1_resource),
+ .resource = s5p_fimc1_resource,
+};
diff --git a/arch/arm/plat-s5p/dev-fimc2.c b/arch/arm/plat-s5p/dev-fimc2.c
new file mode 100644
index 0000000..dfddeda
--- /dev/null
+++ b/arch/arm/plat-s5p/dev-fimc2.c
@@ -0,0 +1,36 @@
+/* linux/arch/arm/plat-s5p/dev-fimc2.c
+ *
+ * Copyright (c) 2010 Samsung Electronics
+ *
+ * Base S5P FIMC2 resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <mach/map.h>
+
+static struct resource s5p_fimc2_resource[] = {
+ [0] = {
+ .start = S5P_PA_FIMC2,
+ .end = S5P_PA_FIMC2 + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_FIMC2,
+ .end = IRQ_FIMC2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device s5p_device_fimc2 = {
+ .name = "s5p-fimc",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(s5p_fimc2_resource),
+ .resource = s5p_fimc2_resource,
+};
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 2753fb3..4529dd6 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -160,6 +160,11 @@
help
Compile in platform device definitions for HSMMC channel 2
+config S3C_DEV_HSMMC3
+ bool
+ help
+ Compile in platform device definitions for HSMMC channel 3
+
config S3C_DEV_HWMON
bool
help
@@ -216,6 +221,11 @@
help
Compile in platform device definition for ADC controller
+config SAMSUNG_DEV_IDE
+ bool
+ help
+ Compile in platform device definitions for IDE
+
config S3C64XX_DEV_SPI
bool
help
@@ -227,6 +237,11 @@
help
Common in platform device definitions for touchscreen device
+config SAMSUNG_DEV_KEYPAD
+ bool
+ help
+ Compile in platform device definitions for keypad
+
# DMA
config S3C_DMA
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 0d5bf8a..4d8ff92 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -30,9 +30,12 @@
# devices
+obj-y += platformdata.o
+
obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o
obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o
obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o
+obj-$(CONFIG_S3C_DEV_HSMMC3) += dev-hsmmc3.o
obj-$(CONFIG_S3C_DEV_HWMON) += dev-hwmon.o
obj-y += dev-i2c0.o
obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o
@@ -47,7 +50,9 @@
obj-$(CONFIG_S3C_DEV_RTC) += dev-rtc.o
obj-$(CONFIG_SAMSUNG_DEV_ADC) += dev-adc.o
+obj-$(CONFIG_SAMSUNG_DEV_IDE) += dev-ide.o
obj-$(CONFIG_SAMSUNG_DEV_TS) += dev-ts.o
+obj-$(CONFIG_SAMSUNG_DEV_KEYPAD) += dev-keypad.o
# DMA support
diff --git a/arch/arm/plat-samsung/dev-hsmmc.c b/arch/arm/plat-samsung/dev-hsmmc.c
index 4c05b39..b0f93f1 100644
--- a/arch/arm/plat-samsung/dev-hsmmc.c
+++ b/arch/arm/plat-samsung/dev-hsmmc.c
@@ -60,6 +60,11 @@
struct s3c_sdhci_platdata *set = &s3c_hsmmc0_def_platdata;
set->max_width = pd->max_width;
+ set->cd_type = pd->cd_type;
+ set->ext_cd_init = pd->ext_cd_init;
+ set->ext_cd_cleanup = pd->ext_cd_cleanup;
+ set->ext_cd_gpio = pd->ext_cd_gpio;
+ set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
if (pd->cfg_gpio)
set->cfg_gpio = pd->cfg_gpio;
diff --git a/arch/arm/plat-samsung/dev-hsmmc1.c b/arch/arm/plat-samsung/dev-hsmmc1.c
index e49bc4c..1504fd8 100644
--- a/arch/arm/plat-samsung/dev-hsmmc1.c
+++ b/arch/arm/plat-samsung/dev-hsmmc1.c
@@ -60,6 +60,11 @@
struct s3c_sdhci_platdata *set = &s3c_hsmmc1_def_platdata;
set->max_width = pd->max_width;
+ set->cd_type = pd->cd_type;
+ set->ext_cd_init = pd->ext_cd_init;
+ set->ext_cd_cleanup = pd->ext_cd_cleanup;
+ set->ext_cd_gpio = pd->ext_cd_gpio;
+ set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
if (pd->cfg_gpio)
set->cfg_gpio = pd->cfg_gpio;
diff --git a/arch/arm/plat-samsung/dev-hsmmc2.c b/arch/arm/plat-samsung/dev-hsmmc2.c
index 824580b..b28ef17 100644
--- a/arch/arm/plat-samsung/dev-hsmmc2.c
+++ b/arch/arm/plat-samsung/dev-hsmmc2.c
@@ -61,6 +61,11 @@
struct s3c_sdhci_platdata *set = &s3c_hsmmc2_def_platdata;
set->max_width = pd->max_width;
+ set->cd_type = pd->cd_type;
+ set->ext_cd_init = pd->ext_cd_init;
+ set->ext_cd_cleanup = pd->ext_cd_cleanup;
+ set->ext_cd_gpio = pd->ext_cd_gpio;
+ set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
if (pd->cfg_gpio)
set->cfg_gpio = pd->cfg_gpio;
diff --git a/arch/arm/plat-samsung/dev-hsmmc3.c b/arch/arm/plat-samsung/dev-hsmmc3.c
new file mode 100644
index 0000000..85aaf0f2
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-hsmmc3.c
@@ -0,0 +1,77 @@
+/* linux/arch/arm/plat-samsung/dev-hsmmc3.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * Based on arch/arm/plat-samsung/dev-hsmmc1.c
+ *
+ * Samsung device definition for hsmmc device 3
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+
+#include <mach/map.h>
+#include <plat/sdhci.h>
+#include <plat/devs.h>
+
+#define S3C_SZ_HSMMC (0x1000)
+
+static struct resource s3c_hsmmc3_resource[] = {
+ [0] = {
+ .start = S3C_PA_HSMMC3,
+ .end = S3C_PA_HSMMC3 + S3C_SZ_HSMMC - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_MMC3,
+ .end = IRQ_MMC3,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 s3c_device_hsmmc3_dmamask = 0xffffffffUL;
+
+struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata = {
+ .max_width = 4,
+ .host_caps = (MMC_CAP_4_BIT_DATA |
+ MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+};
+
+struct platform_device s3c_device_hsmmc3 = {
+ .name = "s3c-sdhci",
+ .id = 3,
+ .num_resources = ARRAY_SIZE(s3c_hsmmc3_resource),
+ .resource = s3c_hsmmc3_resource,
+ .dev = {
+ .dma_mask = &s3c_device_hsmmc3_dmamask,
+ .coherent_dma_mask = 0xffffffffUL,
+ .platform_data = &s3c_hsmmc3_def_platdata,
+ },
+};
+
+void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd)
+{
+ struct s3c_sdhci_platdata *set = &s3c_hsmmc3_def_platdata;
+
+ set->max_width = pd->max_width;
+ set->cd_type = pd->cd_type;
+ set->ext_cd_init = pd->ext_cd_init;
+ set->ext_cd_cleanup = pd->ext_cd_cleanup;
+ set->ext_cd_gpio = pd->ext_cd_gpio;
+ set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
+
+ if (pd->cfg_gpio)
+ set->cfg_gpio = pd->cfg_gpio;
+ if (pd->cfg_card)
+ set->cfg_card = pd->cfg_card;
+}
diff --git a/arch/arm/plat-samsung/dev-ide.c b/arch/arm/plat-samsung/dev-ide.c
new file mode 100644
index 0000000..b497982
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-ide.c
@@ -0,0 +1,44 @@
+/* linux/arch/arm/plat-samsung/dev-ide.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Samsung CF-ATA device definition.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <mach/map.h>
+#include <plat/ata.h>
+#include <plat/devs.h>
+
+static struct resource s3c_cfcon_resource[] = {
+ [0] = {
+ .start = SAMSUNG_PA_CFCON,
+ .end = SAMSUNG_PA_CFCON + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_CFCON,
+ .end = IRQ_CFCON,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device s3c_device_cfcon = {
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s3c_cfcon_resource),
+ .resource = s3c_cfcon_resource,
+};
+
+void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata)
+{
+ s3c_set_platdata(pdata, sizeof(struct s3c_ide_platdata),
+ &s3c_device_cfcon);
+}
diff --git a/arch/arm/plat-samsung/dev-keypad.c b/arch/arm/plat-samsung/dev-keypad.c
new file mode 100644
index 0000000..677c2d7
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-keypad.c
@@ -0,0 +1,50 @@
+/*
+ * linux/arch/arm/plat-samsung/dev-keypad.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <mach/irqs.h>
+#include <mach/map.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/keypad.h>
+
+static struct resource samsung_keypad_resources[] = {
+ [0] = {
+ .start = SAMSUNG_PA_KEYPAD,
+ .end = SAMSUNG_PA_KEYPAD + 0x20 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_KEYPAD,
+ .end = IRQ_KEYPAD,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device samsung_device_keypad = {
+ .name = "samsung-keypad",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(samsung_keypad_resources),
+ .resource = samsung_keypad_resources,
+};
+
+void __init samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd)
+{
+ struct samsung_keypad_platdata *npd;
+
+ npd = s3c_set_platdata(pd, sizeof(struct samsung_keypad_platdata),
+ &samsung_device_keypad);
+
+ if (!npd->cfg_gpio)
+ npd->cfg_gpio = samsung_keypad_cfg_gpio;
+}
diff --git a/arch/arm/plat-samsung/dev-wdt.c b/arch/arm/plat-samsung/dev-wdt.c
index 5efca87..019b5b8 100644
--- a/arch/arm/plat-samsung/dev-wdt.c
+++ b/arch/arm/plat-samsung/dev-wdt.c
@@ -21,7 +21,7 @@
static struct resource s3c_wdt_resource[] = {
[0] = {
.start = S3C_PA_WDT,
- .end = S3C_PA_WDT + SZ_1M - 1,
+ .end = S3C_PA_WDT + SZ_1K,
.flags = IORESOURCE_MEM,
},
[1] = {
diff --git a/arch/arm/plat-samsung/gpiolib.c b/arch/arm/plat-samsung/gpiolib.c
index 8a8ba8b..c354089 100644
--- a/arch/arm/plat-samsung/gpiolib.c
+++ b/arch/arm/plat-samsung/gpiolib.c
@@ -18,7 +18,7 @@
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/io.h>
-#include <mach/gpio.h>
+#include <linux/gpio.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
diff --git a/arch/arm/plat-samsung/include/plat/adc-core.h b/arch/arm/plat-samsung/include/plat/adc-core.h
new file mode 100644
index 0000000..a281568
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/adc-core.h
@@ -0,0 +1,28 @@
+/* linux/arch/arm/plat-samsung/include/plat/adc-core.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Samsung ADC Controller core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_ADC_CORE_H
+#define __ASM_PLAT_ADC_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c_adc_setname(char *name)
+{
+#ifdef CONFIG_SAMSUNG_DEV_ADC
+ s3c_device_adc.name = name;
+#endif
+}
+
+#endif /* __ASM_PLAT_ADC_CORE_H */
diff --git a/arch/arm/plat-samsung/include/plat/ata-core.h b/arch/arm/plat-samsung/include/plat/ata-core.h
new file mode 100644
index 0000000..f5a4ec7
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/ata-core.h
@@ -0,0 +1,28 @@
+/* linux/arch/arm/plat-samsung/include/plat/ata-core.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Samsung CF-ATA Controller core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_ATA_CORE_H
+#define __ASM_PLAT_ATA_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+*/
+
+/* re-define device name depending on support. */
+static inline void s3c_cfcon_setname(char *name)
+{
+#ifdef CONFIG_SAMSUNG_DEV_IDE
+ s3c_device_cfcon.name = name;
+#endif
+}
+
+#endif /* __ASM_PLAT_ATA_CORE_H */
diff --git a/arch/arm/plat-samsung/include/plat/ata.h b/arch/arm/plat-samsung/include/plat/ata.h
new file mode 100644
index 0000000..2a3855a
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/ata.h
@@ -0,0 +1,36 @@
+/* linux/arch/arm/plat-samsung/include/plat/ata.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Samsung CF-ATA platform_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_ATA_H
+#define __ASM_PLAT_ATA_H __FILE__
+
+/**
+ * struct s3c_ide_platdata - S3C IDE driver platform data.
+ * @setup_gpio: Setup the external GPIO pins to the right state for data
+ * transfer in true-ide mode.
+ */
+struct s3c_ide_platdata {
+ void (*setup_gpio)(void);
+};
+
+/*
+ * s3c_ide_set_platdata() - Setup the platform specifc data for IDE driver.
+ * @pdata: Platform data for IDE driver.
+ */
+extern void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata);
+
+/* architecture-specific IDE configuration */
+extern void s3c64xx_ide_setup_gpio(void);
+extern void s5pc100_ide_setup_gpio(void);
+extern void s5pv210_ide_setup_gpio(void);
+
+#endif /*__ASM_PLAT_ATA_H */
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index e6144e4..85f6f23 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -54,6 +54,8 @@
extern struct platform_device s3c_device_hsmmc0;
extern struct platform_device s3c_device_hsmmc1;
extern struct platform_device s3c_device_hsmmc2;
+extern struct platform_device s3c_device_hsmmc3;
+extern struct platform_device s3c_device_cfcon;
extern struct platform_device s3c_device_spi0;
extern struct platform_device s3c_device_spi1;
@@ -100,6 +102,12 @@
extern struct platform_device s5pc100_device_iis1;
extern struct platform_device s5pc100_device_iis2;
+extern struct platform_device samsung_device_keypad;
+
+extern struct platform_device s5p_device_fimc0;
+extern struct platform_device s5p_device_fimc1;
+extern struct platform_device s5p_device_fimc2;
+
/* s3c2440 specific devices */
#ifdef CONFIG_CPU_S3C2440
@@ -108,3 +116,15 @@
extern struct platform_device s3c_device_ac97;
#endif
+
+/**
+ * s3c_set_platdata() - helper for setting platform data
+ * @pd: The default platform data for this device.
+ * @pdsize: The size of the platform data.
+ * @pdev: Pointer to the device to fill in.
+ *
+ * This helper replaces a number of calls that copy and then set the
+ * platform data of the device.
+ */
+extern void *s3c_set_platdata(void *pd, size_t pdsize,
+ struct platform_device *pdev);
diff --git a/arch/arm/plat-samsung/include/plat/fimc-core.h b/arch/arm/plat-samsung/include/plat/fimc-core.h
new file mode 100644
index 0000000..81a3bfe
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/fimc-core.h
@@ -0,0 +1,44 @@
+/*
+ * arch/arm/plat-samsung/include/plat/fimc-core.h
+ *
+ * Copyright 2010 Samsung Electronics Co., Ltd.
+ * Sylwester Nawrocki <s.nawrocki@samsung.com>
+ *
+ * Samsung camera interface driver core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_PLAT_FIMC_CORE_H
+#define __ASM_PLAT_FIMC_CORE_H __FILE__
+
+/*
+ * These functions are only for use with the core support code, such as
+ * the CPU-specific initialization code.
+ */
+
+/* Re-define device name to differentiate the subsystem in various SoCs. */
+static inline void s3c_fimc_setname(int id, char *name)
+{
+ switch (id) {
+#ifdef CONFIG_S5P_DEV_FIMC0
+ case 0:
+ s5p_device_fimc0.name = name;
+ break;
+#endif
+#ifdef CONFIG_S5P_DEV_FIMC1
+ case 1:
+ s5p_device_fimc1.name = name;
+ break;
+#endif
+#ifdef CONFIG_S5P_DEV_FIMC2
+ case 2:
+ s5p_device_fimc2.name = name;
+ break;
+#endif
+ }
+}
+
+#endif /* __ASM_PLAT_FIMC_CORE_H */
diff --git a/arch/arm/plat-samsung/include/plat/keypad.h b/arch/arm/plat-samsung/include/plat/keypad.h
new file mode 100644
index 0000000..b59a648
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/keypad.h
@@ -0,0 +1,56 @@
+/*
+ * Samsung Platform - Keypad platform data definitions
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PLAT_SAMSUNG_KEYPAD_H
+#define __PLAT_SAMSUNG_KEYPAD_H
+
+#include <linux/input/matrix_keypad.h>
+
+#define SAMSUNG_MAX_ROWS 8
+#define SAMSUNG_MAX_COLS 8
+
+/**
+ * struct samsung_keypad_platdata - Platform device data for Samsung Keypad.
+ * @keymap_data: pointer to &matrix_keymap_data.
+ * @rows: number of keypad row supported.
+ * @cols: number of keypad col supported.
+ * @no_autorepeat: disable key autorepeat.
+ * @wakeup: controls whether the device should be set up as wakeup source.
+ * @cfg_gpio: configure the GPIO.
+ *
+ * Initialisation data specific to either the machine or the platform
+ * for the device driver to use or call-back when configuring gpio.
+ */
+struct samsung_keypad_platdata {
+ const struct matrix_keymap_data *keymap_data;
+ unsigned int rows;
+ unsigned int cols;
+ bool no_autorepeat;
+ bool wakeup;
+
+ void (*cfg_gpio)(unsigned int rows, unsigned int cols);
+};
+
+/**
+ * samsung_keypad_set_platdata - Set platform data for Samsung Keypad device.
+ * @pd: Platform data to register to device.
+ *
+ * Register the given platform data for use with Samsung Keypad device.
+ * The call will copy the platform data, so the board definitions can
+ * make the structure itself __initdata.
+ */
+extern void samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd);
+
+/* defined by architecture to configure gpio. */
+extern void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols);
+
+#endif /* __PLAT_SAMSUNG_KEYPAD_H */
diff --git a/arch/arm/plat-samsung/include/plat/regs-ata.h b/arch/arm/plat-samsung/include/plat/regs-ata.h
new file mode 100644
index 0000000..f5df92f
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/regs-ata.h
@@ -0,0 +1,56 @@
+/* linux/arch/arm/plat-samsung/include/plat/regs-ata.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Samsung CF-ATA register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_REGS_ATA_H
+#define __ASM_PLAT_REGS_ATA_H __FILE__
+
+#define S3C_CFATA_REG(x) (x)
+
+#define S3C_CFATA_MUX S3C_CFATA_REG(0x0)
+
+#define S3C_ATA_CTRL S3C_CFATA_REG(0x0)
+#define S3C_ATA_STATUS S3C_CFATA_REG(0x4)
+#define S3C_ATA_CMD S3C_CFATA_REG(0x8)
+#define S3C_ATA_SWRST S3C_CFATA_REG(0xc)
+#define S3C_ATA_IRQ S3C_CFATA_REG(0x10)
+#define S3C_ATA_IRQ_MSK S3C_CFATA_REG(0x14)
+#define S3C_ATA_CFG S3C_CFATA_REG(0x18)
+
+#define S3C_ATA_MDMA_TIME S3C_CFATA_REG(0x28)
+#define S3C_ATA_PIO_TIME S3C_CFATA_REG(0x2c)
+#define S3C_ATA_UDMA_TIME S3C_CFATA_REG(0x30)
+#define S3C_ATA_XFR_NUM S3C_CFATA_REG(0x34)
+#define S3C_ATA_XFR_CNT S3C_CFATA_REG(0x38)
+#define S3C_ATA_TBUF_START S3C_CFATA_REG(0x3c)
+#define S3C_ATA_TBUF_SIZE S3C_CFATA_REG(0x40)
+#define S3C_ATA_SBUF_START S3C_CFATA_REG(0x44)
+#define S3C_ATA_SBUF_SIZE S3C_CFATA_REG(0x48)
+#define S3C_ATA_CADR_TBUF S3C_CFATA_REG(0x4c)
+#define S3C_ATA_CADR_SBUF S3C_CFATA_REG(0x50)
+#define S3C_ATA_PIO_DTR S3C_CFATA_REG(0x54)
+#define S3C_ATA_PIO_FED S3C_CFATA_REG(0x58)
+#define S3C_ATA_PIO_SCR S3C_CFATA_REG(0x5c)
+#define S3C_ATA_PIO_LLR S3C_CFATA_REG(0x60)
+#define S3C_ATA_PIO_LMR S3C_CFATA_REG(0x64)
+#define S3C_ATA_PIO_LHR S3C_CFATA_REG(0x68)
+#define S3C_ATA_PIO_DVR S3C_CFATA_REG(0x6c)
+#define S3C_ATA_PIO_CSD S3C_CFATA_REG(0x70)
+#define S3C_ATA_PIO_DAD S3C_CFATA_REG(0x74)
+#define S3C_ATA_PIO_READY S3C_CFATA_REG(0x78)
+#define S3C_ATA_PIO_RDATA S3C_CFATA_REG(0x7c)
+
+#define S3C_CFATA_MUX_TRUEIDE 0x01
+
+#define S3C_ATA_CFG_SWAP 0x40
+#define S3C_ATA_CFG_IORDYEN 0x02
+
+#endif /* __ASM_PLAT_REGS_ATA_H */
diff --git a/arch/arm/plat-samsung/include/plat/regs-rtc.h b/arch/arm/plat-samsung/include/plat/regs-rtc.h
index 65c190d..30b7cc1 100644
--- a/arch/arm/plat-samsung/include/plat/regs-rtc.h
+++ b/arch/arm/plat-samsung/include/plat/regs-rtc.h
@@ -14,6 +14,9 @@
#define __ASM_ARCH_REGS_RTC_H __FILE__
#define S3C2410_RTCREG(x) (x)
+#define S3C2410_INTP S3C2410_RTCREG(0x30)
+#define S3C2410_INTP_ALM (1 << 1)
+#define S3C2410_INTP_TIC (1 << 0)
#define S3C2410_RTCCON S3C2410_RTCREG(0x40)
#define S3C2410_RTCCON_RTCEN (1<<0)
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index 1041372..30844c2 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -20,10 +20,31 @@
struct mmc_card;
struct mmc_ios;
+enum cd_types {
+ S3C_SDHCI_CD_INTERNAL, /* use mmc internal CD line */
+ S3C_SDHCI_CD_EXTERNAL, /* use external callback */
+ S3C_SDHCI_CD_GPIO, /* use external gpio pin for CD line */
+ S3C_SDHCI_CD_NONE, /* no CD line, use polling to detect card */
+ S3C_SDHCI_CD_PERMANENT, /* no CD line, card permanently wired to host */
+};
+
/**
* struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI
* @max_width: The maximum number of data bits supported.
* @host_caps: Standard MMC host capabilities bit field.
+ * @cd_type: Type of Card Detection method (see cd_types enum above)
+ * @ext_cd_init: Initialize external card detect subsystem. Called on
+ * sdhci-s3c driver probe when cd_type == S3C_SDHCI_CD_EXTERNAL.
+ * notify_func argument is a callback to the sdhci-s3c driver
+ * that triggers the card detection event. Callback arguments:
+ * dev is pointer to platform device of the host controller,
+ * state is new state of the card (0 - removed, 1 - inserted).
+ * @ext_cd_cleanup: Cleanup external card detect subsystem. Called on
+ * sdhci-s3c driver remove when cd_type == S3C_SDHCI_CD_EXTERNAL.
+ * notify_func argument is the same callback as for ext_cd_init.
+ * @ext_cd_gpio: gpio pin used for external CD line, valid only if
+ * cd_type == S3C_SDHCI_CD_GPIO
+ * @ext_cd_gpio_invert: invert values for external CD gpio line
* @cfg_gpio: Configure the GPIO for a specific card bit-width
* @cfg_card: Configure the interface for a specific card and speed. This
* is necessary the controllers and/or GPIO blocks require the
@@ -37,9 +58,17 @@
struct s3c_sdhci_platdata {
unsigned int max_width;
unsigned int host_caps;
+ enum cd_types cd_type;
char **clocks; /* set of clock sources */
+ int ext_cd_gpio;
+ bool ext_cd_gpio_invert;
+ int (*ext_cd_init)(void (*notify_func)(struct platform_device *,
+ int state));
+ int (*ext_cd_cleanup)(void (*notify_func)(struct platform_device *,
+ int state));
+
void (*cfg_gpio)(struct platform_device *dev, int width);
void (*cfg_card)(struct platform_device *dev,
void __iomem *regbase,
@@ -58,6 +87,7 @@
extern void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd);
extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd);
extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd);
+extern void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd);
/* Default platform data, exported so that per-cpu initialisation can
* set the correct one when there are more than one cpu type selected.
@@ -66,6 +96,7 @@
extern struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata;
extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata;
extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata;
+extern struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata;
/* Helper function availablity */
@@ -80,12 +111,11 @@
extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
extern void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
-/* S3C6400 SDHCI setup */
+/* S3C64XX SDHCI setup */
#ifdef CONFIG_S3C64XX_SETUP_SDHCI
extern char *s3c64xx_hsmmc_clksrcs[4];
-#ifdef CONFIG_S3C_DEV_HSMMC
extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
void __iomem *r,
struct mmc_ios *ios,
@@ -93,76 +123,62 @@
static inline void s3c6400_default_sdhci0(void)
{
+#ifdef CONFIG_S3C_DEV_HSMMC
s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
s3c_hsmmc0_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+#endif
}
-#else
-static inline void s3c6400_default_sdhci0(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC */
-
-#ifdef CONFIG_S3C_DEV_HSMMC1
static inline void s3c6400_default_sdhci1(void)
{
+#ifdef CONFIG_S3C_DEV_HSMMC1
s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
s3c_hsmmc1_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+#endif
}
-#else
-static inline void s3c6400_default_sdhci1(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
-#ifdef CONFIG_S3C_DEV_HSMMC2
static inline void s3c6400_default_sdhci2(void)
{
+#ifdef CONFIG_S3C_DEV_HSMMC2
s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
s3c_hsmmc2_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+#endif
}
-#else
-static inline void s3c6400_default_sdhci2(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC2 */
-
-/* S3C6410 SDHCI setup */
extern void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev,
void __iomem *r,
struct mmc_ios *ios,
struct mmc_card *card);
-#ifdef CONFIG_S3C_DEV_HSMMC
static inline void s3c6410_default_sdhci0(void)
{
+#ifdef CONFIG_S3C_DEV_HSMMC
s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
+#endif
}
-#else
-static inline void s3c6410_default_sdhci0(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC */
-#ifdef CONFIG_S3C_DEV_HSMMC1
static inline void s3c6410_default_sdhci1(void)
{
+#ifdef CONFIG_S3C_DEV_HSMMC1
s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
+#endif
}
-#else
-static inline void s3c6410_default_sdhci1(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
-#ifdef CONFIG_S3C_DEV_HSMMC2
static inline void s3c6410_default_sdhci2(void)
{
+#ifdef CONFIG_S3C_DEV_HSMMC2
s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
+#endif
}
-#else
-static inline void s3c6410_default_sdhci2(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC2 */
#else
static inline void s3c6410_default_sdhci0(void) { }
@@ -184,48 +200,42 @@
struct mmc_ios *ios,
struct mmc_card *card);
-#ifdef CONFIG_S3C_DEV_HSMMC
static inline void s5pc100_default_sdhci0(void)
{
+#ifdef CONFIG_S3C_DEV_HSMMC
s3c_hsmmc0_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio;
s3c_hsmmc0_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
+#endif
}
-#else
-static inline void s5pc100_default_sdhci0(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC */
-#ifdef CONFIG_S3C_DEV_HSMMC1
static inline void s5pc100_default_sdhci1(void)
{
+#ifdef CONFIG_S3C_DEV_HSMMC1
s3c_hsmmc1_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio;
s3c_hsmmc1_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
+#endif
}
-#else
-static inline void s5pc100_default_sdhci1(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
-#ifdef CONFIG_S3C_DEV_HSMMC2
static inline void s5pc100_default_sdhci2(void)
{
+#ifdef CONFIG_S3C_DEV_HSMMC2
s3c_hsmmc2_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio;
s3c_hsmmc2_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
+#endif
}
-#else
-static inline void s5pc100_default_sdhci2(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
-
#else
static inline void s5pc100_default_sdhci0(void) { }
static inline void s5pc100_default_sdhci1(void) { }
static inline void s5pc100_default_sdhci2(void) { }
+
#endif /* CONFIG_S5PC100_SETUP_SDHCI */
+/* S5PV210 SDHCI setup */
-/* S5PC110 SDHCI setup */
#ifdef CONFIG_S5PV210_SETUP_SDHCI
extern char *s5pv210_hsmmc_clksrcs[4];
@@ -234,58 +244,48 @@
struct mmc_ios *ios,
struct mmc_card *card);
-#ifdef CONFIG_S3C_DEV_HSMMC
static inline void s5pv210_default_sdhci0(void)
{
+#ifdef CONFIG_S3C_DEV_HSMMC
s3c_hsmmc0_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s5pv210_setup_sdhci0_cfg_gpio;
s3c_hsmmc0_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
+#endif
}
-#else
-static inline void s5pv210_default_sdhci0(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC */
-#ifdef CONFIG_S3C_DEV_HSMMC1
static inline void s5pv210_default_sdhci1(void)
{
+#ifdef CONFIG_S3C_DEV_HSMMC1
s3c_hsmmc1_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s5pv210_setup_sdhci1_cfg_gpio;
s3c_hsmmc1_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
+#endif
}
-#else
-static inline void s5pv210_default_sdhci1(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
-#ifdef CONFIG_S3C_DEV_HSMMC2
static inline void s5pv210_default_sdhci2(void)
{
+#ifdef CONFIG_S3C_DEV_HSMMC2
s3c_hsmmc2_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = s5pv210_setup_sdhci2_cfg_gpio;
s3c_hsmmc2_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
+#endif
}
-#else
-static inline void s5pv210_default_sdhci2(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC2 */
-#ifdef CONFIG_S3C_DEV_HSMMC3
static inline void s5pv210_default_sdhci3(void)
{
+#ifdef CONFIG_S3C_DEV_HSMMC3
s3c_hsmmc3_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
s3c_hsmmc3_def_platdata.cfg_gpio = s5pv210_setup_sdhci3_cfg_gpio;
s3c_hsmmc3_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
+#endif
}
-#else
-static inline void s5pv210_default_sdhci3(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC3 */
#else
static inline void s5pv210_default_sdhci0(void) { }
static inline void s5pv210_default_sdhci1(void) { }
static inline void s5pv210_default_sdhci2(void) { }
static inline void s5pv210_default_sdhci3(void) { }
-#endif /* CONFIG_S5PC100_SETUP_SDHCI */
-
-
+#endif /* CONFIG_S5PV210_SETUP_SDHCI */
#endif /* __PLAT_S3C_SDHCI_H */
diff --git a/arch/arm/plat-samsung/platformdata.c b/arch/arm/plat-samsung/platformdata.c
new file mode 100644
index 0000000..7cf2e1e
--- /dev/null
+++ b/arch/arm/plat-samsung/platformdata.c
@@ -0,0 +1,37 @@
+/* linux/arch/arm/plat-samsung/platformdata.c
+ *
+ * Copyright 2010 Ben Dooks <ben-linux <at> fluff.org>
+ *
+ * Helper for platform data setting
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <plat/devs.h>
+
+void __init *s3c_set_platdata(void *pd, size_t pdsize,
+ struct platform_device *pdev)
+{
+ void *npd;
+
+ if (!pd) {
+ /* too early to use dev_name(), may not be registered */
+ printk(KERN_ERR "%s: no platform data supplied\n", pdev->name);
+ return NULL;
+ }
+
+ npd = kmemdup(pd, pdsize, GFP_KERNEL);
+ if (!npd) {
+ printk(KERN_ERR "%s: cannot clone platform data\n", pdev->name);
+ return NULL;
+ }
+
+ pdev->dev.platform_data = npd;
+ return npd;
+}
