| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright 2013-2014 Freescale Semiconductor, Inc. |
| */ |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/thermal/thermal.h> |
| |
| / { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| interrupt-parent = <&gic>; |
| |
| aliases { |
| crypto = &crypto; |
| ethernet0 = &enet0; |
| ethernet1 = &enet1; |
| ethernet2 = &enet2; |
| rtc1 = &ftm_alarm0; |
| serial0 = &lpuart0; |
| serial1 = &lpuart1; |
| serial2 = &lpuart2; |
| serial3 = &lpuart3; |
| serial4 = &lpuart4; |
| serial5 = &lpuart5; |
| sysclk = &sysclk; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@f00 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| reg = <0xf00>; |
| clocks = <&clockgen 1 0>; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu1: cpu@f01 { |
| compatible = "arm,cortex-a7"; |
| device_type = "cpu"; |
| reg = <0xf01>; |
| clocks = <&clockgen 1 0>; |
| #cooling-cells = <2>; |
| }; |
| }; |
| |
| memory@0 { |
| device_type = "memory"; |
| reg = <0x0 0x0 0x0 0x0>; |
| }; |
| |
| sysclk: sysclk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <100000000>; |
| clock-output-names = "sysclk"; |
| }; |
| |
| timer { |
| compatible = "arm,armv7-timer"; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a7-pmu"; |
| interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-affinity = <&cpu0>, <&cpu1>; |
| }; |
| |
| reboot { |
| compatible = "syscon-reboot"; |
| regmap = <&dcfg>; |
| offset = <0xb0>; |
| mask = <0x02>; |
| }; |
| |
| soc { |
| compatible = "simple-bus"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| device_type = "soc"; |
| interrupt-parent = <&gic>; |
| ranges; |
| |
| ddr: memory-controller@1080000 { |
| compatible = "fsl,qoriq-memory-controller"; |
| reg = <0x0 0x1080000 0x0 0x1000>; |
| interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; |
| big-endian; |
| }; |
| |
| gic: interrupt-controller@1400000 { |
| compatible = "arm,gic-400", "arm,cortex-a7-gic"; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| reg = <0x0 0x1401000 0x0 0x1000>, |
| <0x0 0x1402000 0x0 0x2000>, |
| <0x0 0x1404000 0x0 0x2000>, |
| <0x0 0x1406000 0x0 0x2000>; |
| interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; |
| |
| }; |
| |
| msi1: msi-controller@1570e00 { |
| compatible = "fsl,ls1021a-msi"; |
| reg = <0x0 0x1570e00 0x0 0x8>; |
| msi-controller; |
| interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| msi2: msi-controller@1570e08 { |
| compatible = "fsl,ls1021a-msi"; |
| reg = <0x0 0x1570e08 0x0 0x8>; |
| msi-controller; |
| interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| ifc: memory-controller@1530000 { |
| compatible = "fsl,ifc"; |
| reg = <0x0 0x1530000 0x0 0x10000>; |
| interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| sfp: efuse@1e80000 { |
| compatible = "fsl,ls1021a-sfp"; |
| reg = <0x0 0x1e80000 0x0 0x10000>; |
| clocks = <&clockgen 4 3>; |
| clock-names = "sfp"; |
| }; |
| |
| dcfg: dcfg@1ee0000 { |
| compatible = "fsl,ls1021a-dcfg", "syscon"; |
| reg = <0x0 0x1ee0000 0x0 0x1000>; |
| big-endian; |
| }; |
| |
| qspi: spi@1550000 { |
| compatible = "fsl,ls1021a-qspi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x1550000 0x0 0x10000>, |
| <0x0 0x40000000 0x0 0x20000000>; |
| reg-names = "QuadSPI", "QuadSPI-memory"; |
| interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "qspi_en", "qspi"; |
| clocks = <&clockgen 4 1>, <&clockgen 4 1>; |
| status = "disabled"; |
| }; |
| |
| esdhc: esdhc@1560000 { |
| compatible = "fsl,ls1021a-esdhc", "fsl,esdhc"; |
| reg = <0x0 0x1560000 0x0 0x10000>; |
| interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <0>; |
| voltage-ranges = <1800 1800 3300 3300>; |
| sdhci,auto-cmd12; |
| big-endian; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| sata: sata@3200000 { |
| compatible = "fsl,ls1021a-ahci"; |
| reg = <0x0 0x3200000 0x0 0x10000>, |
| <0x0 0x20220520 0x0 0x4>; |
| reg-names = "ahci", "sata-ecc"; |
| interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clockgen 4 1>; |
| dma-coherent; |
| status = "disabled"; |
| }; |
| |
| scfg: scfg@1570000 { |
| compatible = "fsl,ls1021a-scfg", "syscon"; |
| reg = <0x0 0x1570000 0x0 0x10000>; |
| big-endian; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0x1570000 0x10000>; |
| |
| extirq: interrupt-controller@1ac { |
| compatible = "fsl,ls1021a-extirq"; |
| #interrupt-cells = <2>; |
| #address-cells = <0>; |
| interrupt-controller; |
| reg = <0x1ac 4>; |
| interrupt-map = |
| <0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, |
| <1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, |
| <2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, |
| <3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, |
| <4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, |
| <5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-map-mask = <0x7 0x0>; |
| }; |
| }; |
| |
| crypto: crypto@1700000 { |
| compatible = "fsl,sec-v5.0", "fsl,sec-v4.0"; |
| fsl,sec-era = <7>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x0 0x1700000 0x0 0x100000>; |
| ranges = <0x0 0x0 0x1700000 0x100000>; |
| interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; |
| dma-coherent; |
| |
| sec_jr0: jr@10000 { |
| compatible = "fsl,sec-v5.0-job-ring", |
| "fsl,sec-v4.0-job-ring"; |
| reg = <0x10000 0x10000>; |
| interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| sec_jr1: jr@20000 { |
| compatible = "fsl,sec-v5.0-job-ring", |
| "fsl,sec-v4.0-job-ring"; |
| reg = <0x20000 0x10000>; |
| interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| sec_jr2: jr@30000 { |
| compatible = "fsl,sec-v5.0-job-ring", |
| "fsl,sec-v4.0-job-ring"; |
| reg = <0x30000 0x10000>; |
| interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| sec_jr3: jr@40000 { |
| compatible = "fsl,sec-v5.0-job-ring", |
| "fsl,sec-v4.0-job-ring"; |
| reg = <0x40000 0x10000>; |
| interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| }; |
| |
| clockgen: clocking@1ee1000 { |
| compatible = "fsl,ls1021a-clockgen"; |
| reg = <0x0 0x1ee1000 0x0 0x1000>; |
| #clock-cells = <2>; |
| clocks = <&sysclk>; |
| }; |
| |
| tmu: tmu@1f00000 { |
| compatible = "fsl,qoriq-tmu"; |
| reg = <0x0 0x1f00000 0x0 0x10000>; |
| interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; |
| fsl,tmu-range = <0xb0000 0x9002c 0x6004e 0x30066>; |
| fsl,tmu-calibration = <0x00000000 0x00000020>, |
| <0x00000001 0x00000024>, |
| <0x00000002 0x0000002a>, |
| <0x00000003 0x00000032>, |
| <0x00000004 0x00000038>, |
| <0x00000005 0x0000003e>, |
| <0x00000006 0x00000043>, |
| <0x00000007 0x0000004a>, |
| <0x00000008 0x00000050>, |
| <0x00000009 0x00000059>, |
| <0x0000000a 0x0000005f>, |
| <0x0000000b 0x00000066>, |
| |
| <0x00010000 0x00000023>, |
| <0x00010001 0x0000002b>, |
| <0x00010002 0x00000033>, |
| <0x00010003 0x0000003a>, |
| <0x00010004 0x00000042>, |
| <0x00010005 0x0000004a>, |
| <0x00010006 0x00000054>, |
| <0x00010007 0x0000005c>, |
| <0x00010008 0x00000065>, |
| <0x00010009 0x0000006f>, |
| |
| <0x00020000 0x00000029>, |
| <0x00020001 0x00000033>, |
| <0x00020002 0x0000003d>, |
| <0x00020003 0x00000048>, |
| <0x00020004 0x00000054>, |
| <0x00020005 0x00000060>, |
| <0x00020006 0x0000006c>, |
| |
| <0x00030000 0x00000025>, |
| <0x00030001 0x00000033>, |
| <0x00030002 0x00000043>, |
| <0x00030003 0x00000055>; |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| dspi0: spi@2100000 { |
| compatible = "fsl,ls1021a-v1.0-dspi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2100000 0x0 0x10000>; |
| interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "dspi"; |
| clocks = <&clockgen 4 1>; |
| spi-num-chipselects = <6>; |
| big-endian; |
| status = "disabled"; |
| }; |
| |
| dspi1: spi@2110000 { |
| compatible = "fsl,ls1021a-v1.0-dspi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2110000 0x0 0x10000>; |
| interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "dspi"; |
| clocks = <&clockgen 4 1>; |
| spi-num-chipselects = <6>; |
| big-endian; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@2180000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2180000 0x0 0x10000>; |
| interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clockgen 4 1>; |
| dma-names = "rx", "tx"; |
| dmas = <&edma0 1 38>, <&edma0 1 39>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@2190000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2190000 0x0 0x10000>; |
| interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clockgen 4 1>; |
| dma-names = "rx", "tx"; |
| dmas = <&edma0 1 36>, <&edma0 1 37>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@21a0000 { |
| compatible = "fsl,vf610-i2c"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x21a0000 0x0 0x10000>; |
| interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clockgen 4 1>; |
| dma-names = "rx", "tx"; |
| dmas = <&edma0 1 34>, <&edma0 1 35>; |
| status = "disabled"; |
| }; |
| |
| uart0: serial@21c0500 { |
| compatible = "fsl,16550-FIFO64", "ns16550a"; |
| reg = <0x0 0x21c0500 0x0 0x100>; |
| interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <0>; |
| fifo-size = <15>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@21c0600 { |
| compatible = "fsl,16550-FIFO64", "ns16550a"; |
| reg = <0x0 0x21c0600 0x0 0x100>; |
| interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <0>; |
| fifo-size = <15>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@21d0500 { |
| compatible = "fsl,16550-FIFO64", "ns16550a"; |
| reg = <0x0 0x21d0500 0x0 0x100>; |
| interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <0>; |
| fifo-size = <15>; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@21d0600 { |
| compatible = "fsl,16550-FIFO64", "ns16550a"; |
| reg = <0x0 0x21d0600 0x0 0x100>; |
| interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <0>; |
| fifo-size = <15>; |
| status = "disabled"; |
| }; |
| |
| counter0: counter@29d0000 { |
| compatible = "fsl,ftm-quaddec"; |
| reg = <0x0 0x29d0000 0x0 0x10000>; |
| big-endian; |
| status = "disabled"; |
| }; |
| |
| counter1: counter@29e0000 { |
| compatible = "fsl,ftm-quaddec"; |
| reg = <0x0 0x29e0000 0x0 0x10000>; |
| big-endian; |
| status = "disabled"; |
| }; |
| |
| counter2: counter@29f0000 { |
| compatible = "fsl,ftm-quaddec"; |
| reg = <0x0 0x29f0000 0x0 0x10000>; |
| big-endian; |
| status = "disabled"; |
| }; |
| |
| counter3: counter@2a00000 { |
| compatible = "fsl,ftm-quaddec"; |
| reg = <0x0 0x2a00000 0x0 0x10000>; |
| big-endian; |
| status = "disabled"; |
| }; |
| |
| gpio0: gpio@2300000 { |
| compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio"; |
| reg = <0x0 0x2300000 0x0 0x10000>; |
| interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio1: gpio@2310000 { |
| compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio"; |
| reg = <0x0 0x2310000 0x0 0x10000>; |
| interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio2: gpio@2320000 { |
| compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio"; |
| reg = <0x0 0x2320000 0x0 0x10000>; |
| interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio3: gpio@2330000 { |
| compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio"; |
| reg = <0x0 0x2330000 0x0 0x10000>; |
| interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| lpuart0: serial@2950000 { |
| compatible = "fsl,ls1021a-lpuart"; |
| reg = <0x0 0x2950000 0x0 0x1000>; |
| interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&sysclk>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| lpuart1: serial@2960000 { |
| compatible = "fsl,ls1021a-lpuart"; |
| reg = <0x0 0x2960000 0x0 0x1000>; |
| interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clockgen 4 1>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| lpuart2: serial@2970000 { |
| compatible = "fsl,ls1021a-lpuart"; |
| reg = <0x0 0x2970000 0x0 0x1000>; |
| interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clockgen 4 1>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| lpuart3: serial@2980000 { |
| compatible = "fsl,ls1021a-lpuart"; |
| reg = <0x0 0x2980000 0x0 0x1000>; |
| interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clockgen 4 1>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| lpuart4: serial@2990000 { |
| compatible = "fsl,ls1021a-lpuart"; |
| reg = <0x0 0x2990000 0x0 0x1000>; |
| interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clockgen 4 1>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| lpuart5: serial@29a0000 { |
| compatible = "fsl,ls1021a-lpuart"; |
| reg = <0x0 0x29a0000 0x0 0x1000>; |
| interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clockgen 4 1>; |
| clock-names = "ipg"; |
| status = "disabled"; |
| }; |
| |
| pwm0: pwm@29d0000 { |
| compatible = "fsl,vf610-ftm-pwm"; |
| #pwm-cells = <3>; |
| reg = <0x0 0x29d0000 0x0 0x10000>; |
| clock-names = "ftm_sys", "ftm_ext", |
| "ftm_fix", "ftm_cnt_clk_en"; |
| clocks = <&clockgen 4 1>, <&clockgen 4 1>, |
| <&clockgen 4 1>, <&clockgen 4 1>; |
| big-endian; |
| status = "disabled"; |
| }; |
| |
| pwm1: pwm@29e0000 { |
| compatible = "fsl,vf610-ftm-pwm"; |
| #pwm-cells = <3>; |
| reg = <0x0 0x29e0000 0x0 0x10000>; |
| clock-names = "ftm_sys", "ftm_ext", |
| "ftm_fix", "ftm_cnt_clk_en"; |
| clocks = <&clockgen 4 1>, <&clockgen 4 1>, |
| <&clockgen 4 1>, <&clockgen 4 1>; |
| big-endian; |
| status = "disabled"; |
| }; |
| |
| pwm2: pwm@29f0000 { |
| compatible = "fsl,vf610-ftm-pwm"; |
| #pwm-cells = <3>; |
| reg = <0x0 0x29f0000 0x0 0x10000>; |
| clock-names = "ftm_sys", "ftm_ext", |
| "ftm_fix", "ftm_cnt_clk_en"; |
| clocks = <&clockgen 4 1>, <&clockgen 4 1>, |
| <&clockgen 4 1>, <&clockgen 4 1>; |
| big-endian; |
| status = "disabled"; |
| }; |
| |
| pwm3: pwm@2a00000 { |
| compatible = "fsl,vf610-ftm-pwm"; |
| #pwm-cells = <3>; |
| reg = <0x0 0x2a00000 0x0 0x10000>; |
| clock-names = "ftm_sys", "ftm_ext", |
| "ftm_fix", "ftm_cnt_clk_en"; |
| clocks = <&clockgen 4 1>, <&clockgen 4 1>, |
| <&clockgen 4 1>, <&clockgen 4 1>; |
| big-endian; |
| status = "disabled"; |
| }; |
| |
| pwm4: pwm@2a10000 { |
| compatible = "fsl,vf610-ftm-pwm"; |
| #pwm-cells = <3>; |
| reg = <0x0 0x2a10000 0x0 0x10000>; |
| clock-names = "ftm_sys", "ftm_ext", |
| "ftm_fix", "ftm_cnt_clk_en"; |
| clocks = <&clockgen 4 1>, <&clockgen 4 1>, |
| <&clockgen 4 1>, <&clockgen 4 1>; |
| big-endian; |
| status = "disabled"; |
| }; |
| |
| pwm5: pwm@2a20000 { |
| compatible = "fsl,vf610-ftm-pwm"; |
| #pwm-cells = <3>; |
| reg = <0x0 0x2a20000 0x0 0x10000>; |
| clock-names = "ftm_sys", "ftm_ext", |
| "ftm_fix", "ftm_cnt_clk_en"; |
| clocks = <&clockgen 4 1>, <&clockgen 4 1>, |
| <&clockgen 4 1>, <&clockgen 4 1>; |
| big-endian; |
| status = "disabled"; |
| }; |
| |
| pwm6: pwm@2a30000 { |
| compatible = "fsl,vf610-ftm-pwm"; |
| #pwm-cells = <3>; |
| reg = <0x0 0x2a30000 0x0 0x10000>; |
| clock-names = "ftm_sys", "ftm_ext", |
| "ftm_fix", "ftm_cnt_clk_en"; |
| clocks = <&clockgen 4 1>, <&clockgen 4 1>, |
| <&clockgen 4 1>, <&clockgen 4 1>; |
| big-endian; |
| status = "disabled"; |
| }; |
| |
| pwm7: pwm@2a40000 { |
| compatible = "fsl,vf610-ftm-pwm"; |
| #pwm-cells = <3>; |
| reg = <0x0 0x2a40000 0x0 0x10000>; |
| clock-names = "ftm_sys", "ftm_ext", |
| "ftm_fix", "ftm_cnt_clk_en"; |
| clocks = <&clockgen 4 1>, <&clockgen 4 1>, |
| <&clockgen 4 1>, <&clockgen 4 1>; |
| big-endian; |
| status = "disabled"; |
| }; |
| |
| wdog0: watchdog@2ad0000 { |
| compatible = "fsl,imx21-wdt"; |
| reg = <0x0 0x2ad0000 0x0 0x10000>; |
| interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clockgen 4 1>; |
| clock-names = "wdog-en"; |
| big-endian; |
| }; |
| |
| sai1: sai@2b50000 { |
| #sound-dai-cells = <0>; |
| compatible = "fsl,vf610-sai"; |
| reg = <0x0 0x2b50000 0x0 0x10000>; |
| interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clockgen 4 1>, <&clockgen 4 1>, |
| <&clockgen 4 1>, <&clockgen 4 1>; |
| clock-names = "bus", "mclk1", "mclk2", "mclk3"; |
| dma-names = "tx", "rx"; |
| dmas = <&edma0 1 47>, |
| <&edma0 1 46>; |
| status = "disabled"; |
| }; |
| |
| sai2: sai@2b60000 { |
| #sound-dai-cells = <0>; |
| compatible = "fsl,vf610-sai"; |
| reg = <0x0 0x2b60000 0x0 0x10000>; |
| interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clockgen 4 1>, <&clockgen 4 1>, |
| <&clockgen 4 1>, <&clockgen 4 1>; |
| clock-names = "bus", "mclk1", "mclk2", "mclk3"; |
| dma-names = "tx", "rx"; |
| dmas = <&edma0 1 45>, |
| <&edma0 1 44>; |
| status = "disabled"; |
| }; |
| |
| edma0: dma-controller@2c00000 { |
| #dma-cells = <2>; |
| compatible = "fsl,vf610-edma"; |
| reg = <0x0 0x2c00000 0x0 0x10000>, |
| <0x0 0x2c10000 0x0 0x10000>, |
| <0x0 0x2c20000 0x0 0x10000>; |
| interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "edma-tx", "edma-err"; |
| dma-channels = <32>; |
| big-endian; |
| clock-names = "dmamux0", "dmamux1"; |
| clocks = <&clockgen 4 1>, |
| <&clockgen 4 1>; |
| }; |
| |
| dcu: dcu@2ce0000 { |
| compatible = "fsl,ls1021a-dcu"; |
| reg = <0x0 0x2ce0000 0x0 0x10000>; |
| interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clockgen 4 0>, |
| <&clockgen 4 0>; |
| clock-names = "dcu", "pix"; |
| big-endian; |
| status = "disabled"; |
| }; |
| |
| mdio0: mdio@2d24000 { |
| compatible = "gianfar"; |
| device_type = "mdio"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2d24000 0x0 0x4000>, |
| <0x0 0x2d10030 0x0 0x4>; |
| }; |
| |
| mdio1: mdio@2d64000 { |
| compatible = "gianfar"; |
| device_type = "mdio"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x0 0x2d64000 0x0 0x4000>, |
| <0x0 0x2d50030 0x0 0x4>; |
| }; |
| |
| ptp_clock@2d10e00 { |
| compatible = "fsl,etsec-ptp"; |
| reg = <0x0 0x2d10e00 0x0 0xb0>; |
| interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; |
| fsl,tclk-period = <5>; |
| fsl,tmr-prsc = <2>; |
| fsl,tmr-add = <0xaaaaaaab>; |
| fsl,tmr-fiper1 = <999999995>; |
| fsl,tmr-fiper2 = <999999995>; |
| fsl,max-adj = <499999999>; |
| fsl,extts-fifo; |
| }; |
| |
| enet0: ethernet@2d10000 { |
| compatible = "fsl,etsec2"; |
| device_type = "network"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| interrupt-parent = <&gic>; |
| model = "eTSEC"; |
| fsl,magic-packet; |
| ranges; |
| dma-coherent; |
| |
| queue-group@2d10000 { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| reg = <0x0 0x2d10000 0x0 0x1000>; |
| interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| queue-group@2d14000 { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| reg = <0x0 0x2d14000 0x0 0x1000>; |
| interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| enet1: ethernet@2d50000 { |
| compatible = "fsl,etsec2"; |
| device_type = "network"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| interrupt-parent = <&gic>; |
| model = "eTSEC"; |
| ranges; |
| dma-coherent; |
| |
| queue-group@2d50000 { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| reg = <0x0 0x2d50000 0x0 0x1000>; |
| interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| queue-group@2d54000 { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| reg = <0x0 0x2d54000 0x0 0x1000>; |
| interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| enet2: ethernet@2d90000 { |
| compatible = "fsl,etsec2"; |
| device_type = "network"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| interrupt-parent = <&gic>; |
| model = "eTSEC"; |
| ranges; |
| dma-coherent; |
| |
| queue-group@2d90000 { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| reg = <0x0 0x2d90000 0x0 0x1000>; |
| interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| queue-group@2d94000 { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| reg = <0x0 0x2d94000 0x0 0x1000>; |
| interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| usb2: usb@8600000 { |
| compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr"; |
| reg = <0x0 0x8600000 0x0 0x1000>; |
| interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; |
| dr_mode = "host"; |
| phy_type = "ulpi"; |
| }; |
| |
| usb3: usb@3100000 { |
| compatible = "snps,dwc3"; |
| reg = <0x0 0x3100000 0x0 0x10000>; |
| interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; |
| dr_mode = "host"; |
| snps,quirk-frame-length-adjustment = <0x20>; |
| snps,dis_rxdet_inp3_quirk; |
| snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; |
| }; |
| |
| pcie@3400000 { |
| compatible = "fsl,ls1021a-pcie"; |
| reg = <0x00 0x03400000 0x0 0x00010000>, /* controller registers */ |
| <0x40 0x00000000 0x0 0x00002000>; /* configuration space */ |
| reg-names = "regs", "config"; |
| interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ |
| fsl,pcie-scfg = <&scfg 0>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| num-viewport = <6>; |
| bus-range = <0x0 0xff>; |
| ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000>, /* downstream I/O */ |
| <0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ |
| msi-parent = <&msi1>, <&msi2>; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 7>; |
| interrupt-map = <0000 0 0 1 &gic GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, |
| <0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, |
| <0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, |
| <0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| pcie@3500000 { |
| compatible = "fsl,ls1021a-pcie"; |
| reg = <0x00 0x03500000 0x0 0x00010000>, /* controller registers */ |
| <0x48 0x00000000 0x0 0x00002000>; /* configuration space */ |
| reg-names = "regs", "config"; |
| interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; |
| fsl,pcie-scfg = <&scfg 1>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| num-viewport = <6>; |
| bus-range = <0x0 0xff>; |
| ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000>, /* downstream I/O */ |
| <0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ |
| msi-parent = <&msi1>, <&msi2>; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 7>; |
| interrupt-map = <0000 0 0 1 &gic GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, |
| <0000 0 0 2 &gic GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, |
| <0000 0 0 3 &gic GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, |
| <0000 0 0 4 &gic GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| can0: can@2a70000 { |
| compatible = "fsl,ls1021ar2-flexcan"; |
| reg = <0x0 0x2a70000 0x0 0x1000>; |
| interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clockgen 4 1>, <&clockgen 4 1>; |
| clock-names = "ipg", "per"; |
| big-endian; |
| }; |
| |
| can1: can@2a80000 { |
| compatible = "fsl,ls1021ar2-flexcan"; |
| reg = <0x0 0x2a80000 0x0 0x1000>; |
| interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clockgen 4 1>, <&clockgen 4 1>; |
| clock-names = "ipg", "per"; |
| big-endian; |
| }; |
| |
| can2: can@2a90000 { |
| compatible = "fsl,ls1021ar2-flexcan"; |
| reg = <0x0 0x2a90000 0x0 0x1000>; |
| interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clockgen 4 1>, <&clockgen 4 1>; |
| clock-names = "ipg", "per"; |
| big-endian; |
| }; |
| |
| can3: can@2aa0000 { |
| compatible = "fsl,ls1021ar2-flexcan"; |
| reg = <0x0 0x2aa0000 0x0 0x1000>; |
| interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clockgen 4 1>, <&clockgen 4 1>; |
| clock-names = "ipg", "per"; |
| big-endian; |
| }; |
| |
| ocram1: sram@10000000 { |
| compatible = "mmio-sram"; |
| reg = <0x0 0x10000000 0x0 0x10000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0x10000000 0x10000>; |
| }; |
| |
| ocram2: sram@10010000 { |
| compatible = "mmio-sram"; |
| reg = <0x0 0x10010000 0x0 0x10000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0x10010000 0x10000>; |
| }; |
| |
| qdma: dma-controller@8390000 { |
| compatible = "fsl,ls1021a-qdma"; |
| reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */ |
| <0x0 0x8389000 0x0 0x1000>, /* Status regs */ |
| <0x0 0x838a000 0x0 0x2000>; /* Block regs */ |
| interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "qdma-error", |
| "qdma-queue0", "qdma-queue1"; |
| #dma-cells = <2>; |
| dma-channels = <8>; |
| block-number = <1>; |
| block-offset = <0x1000>; |
| fsl,dma-queues = <2>; |
| status-sizes = <64>; |
| queue-sizes = <64 64>; |
| big-endian; |
| }; |
| |
| rcpm: power-controller@1ee2140 { |
| compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+"; |
| reg = <0x0 0x1ee2140 0x0 0x8>; |
| #fsl,rcpm-wakeup-cells = <2>; |
| #power-domain-cells = <0>; |
| }; |
| |
| ftm_alarm0: timer0@29d0000 { |
| compatible = "fsl,ls1021a-ftm-alarm"; |
| reg = <0x0 0x29d0000 0x0 0x10000>; |
| reg-names = "ftm"; |
| fsl,rcpm-wakeup = <&rcpm 0x0 0x20000000>; |
| interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; |
| big-endian; |
| }; |
| }; |
| |
| thermal-zones { |
| cpu_thermal: cpu-thermal { |
| polling-delay-passive = <1000>; |
| polling-delay = <5000>; |
| |
| thermal-sensors = <&tmu 0>; |
| |
| trips { |
| cpu_alert: cpu-alert { |
| temperature = <85000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| cpu_crit: cpu-crit { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&cpu_alert>; |
| cooling-device = |
| <&cpu0 THERMAL_NO_LIMIT |
| THERMAL_NO_LIMIT>, |
| <&cpu1 THERMAL_NO_LIMIT |
| THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| }; |
| }; |
