| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2013 Marek Belisko <marek@goldelico.com> |
| * |
| * Based on omap3-beagle-xm.dts |
| */ |
| /dts-v1/; |
| |
| #include "omap36xx.dtsi" |
| #include <dt-bindings/input/input.h> |
| |
| / { |
| model = "OMAP3 GTA04"; |
| compatible = "ti,omap3-gta04", "ti,omap3630", "ti,omap36xx", "ti,omap3"; |
| |
| cpus { |
| cpu@0 { |
| cpu0-supply = <&vcc>; |
| }; |
| }; |
| |
| memory@80000000 { |
| device_type = "memory"; |
| reg = <0x80000000 0x20000000>; /* 512 MB */ |
| }; |
| |
| chosen { |
| stdout-path = &uart3; |
| }; |
| |
| aliases { |
| display0 = &lcd; |
| display1 = &tv0; |
| /delete-property/ mmc2; |
| /delete-property/ mmc3; |
| }; |
| |
| ldo_3v3: fixedregulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "ldo_3v3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| /* fixed 26MHz oscillator */ |
| hfclk_26m: oscillator { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <26000000>; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| |
| aux-button { |
| label = "aux"; |
| linux,code = <KEY_PHONE>; |
| gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; |
| wakeup-source; |
| }; |
| }; |
| |
| antenna-detect { |
| compatible = "gpio-keys"; |
| |
| gps_antenna_button: gps-antenna-button { |
| label = "GPS_EXT_ANT"; |
| linux,input-type = <EV_SW>; |
| linux,code = <SW_LINEIN_INSERT>; |
| gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* GPIO144 */ |
| interrupt-parent = <&gpio5>; |
| interrupts = <16 IRQ_TYPE_EDGE_BOTH>; |
| debounce-interval = <10>; |
| wakeup-source; |
| }; |
| }; |
| |
| sound { |
| compatible = "ti,omap-twl4030"; |
| ti,model = "gta04"; |
| |
| ti,mcbsp = <&mcbsp2>; |
| }; |
| |
| /* GSM audio */ |
| sound_telephony { |
| compatible = "simple-audio-card"; |
| simple-audio-card,name = "GTA04 voice"; |
| simple-audio-card,bitclock-master = <&telephony_link_master>; |
| simple-audio-card,frame-master = <&telephony_link_master>; |
| simple-audio-card,format = "i2s"; |
| simple-audio-card,bitclock-inversion; |
| simple-audio-card,frame-inversion; |
| simple-audio-card,cpu { |
| sound-dai = <&mcbsp4>; |
| }; |
| |
| telephony_link_master: simple-audio-card,codec { |
| sound-dai = <>m601_codec>; |
| }; |
| }; |
| |
| gtm601_codec: gsm_codec { |
| compatible = "option,gtm601"; |
| #sound-dai-cells = <0>; |
| }; |
| |
| spi_lcd: spi { |
| compatible = "spi-gpio"; |
| #address-cells = <0x1>; |
| #size-cells = <0x0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi_gpio_pins>; |
| |
| sck-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; |
| miso-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; |
| mosi-gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; |
| cs-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; |
| num-chipselects = <1>; |
| |
| /* lcd panel */ |
| lcd: td028ttec1@0 { |
| compatible = "tpo,td028ttec1"; |
| reg = <0>; |
| spi-max-frequency = <100000>; |
| spi-cpol; |
| spi-cpha; |
| |
| backlight = <&backlight>; |
| label = "lcd"; |
| port { |
| lcd_in: endpoint { |
| remote-endpoint = <&dpi_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| backlight: backlight { |
| compatible = "pwm-backlight"; |
| pwms = <&pwm11 0 12000000 0>; |
| pwm-names = "backlight"; |
| brightness-levels = <0 11 20 30 40 50 60 70 80 90 100>; |
| default-brightness-level = <9>; /* => 90 */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&backlight_pins>; |
| }; |
| |
| pwm11: pwm-11 { |
| compatible = "ti,omap-dmtimer-pwm"; |
| ti,timers = <&timer11>; |
| #pwm-cells = <3>; |
| ti,clock-source = <0x01>; |
| }; |
| |
| hsusb2_phy: hsusb2_phy { |
| compatible = "usb-nop-xceiv"; |
| reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; |
| #phy-cells = <0>; |
| }; |
| |
| tv0: connector { |
| compatible = "composite-video-connector"; |
| label = "tv"; |
| |
| port { |
| tv_connector_in: endpoint { |
| remote-endpoint = <&opa_out>; |
| }; |
| }; |
| }; |
| |
| tv_amp: opa362 { |
| compatible = "ti,opa362"; |
| enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; /* GPIO_23 to enable video out amplifier */ |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| opa_in: endpoint { |
| remote-endpoint = <&venc_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| opa_out: endpoint { |
| remote-endpoint = <&tv_connector_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| wifi_pwrseq: wifi_pwrseq { |
| compatible = "mmc-pwrseq-simple"; |
| reset-gpios = <&tca6507 0 GPIO_ACTIVE_LOW>; /* W2CBW003 reset through tca6507 */ |
| }; |
| |
| /* devconf0 setup for mcbsp1 clock pins */ |
| pinmux_mcbsp1@48002274 { |
| compatible = "pinctrl-single"; |
| reg = <0x48002274 4>; /* CONTROL_DEVCONF0 */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-single,bit-per-mux; |
| pinctrl-single,register-width = <32>; |
| pinctrl-single,function-mask = <0x7>; /* MCBSP1 CLK pinmux */ |
| #pinctrl-cells = <2>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mcbsp1_devconf0_pins>; |
| mcbsp1_devconf0_pins: pinmux_mcbsp1_devconf0_pins { |
| /* offset bits mask */ |
| pinctrl-single,bits = <0x00 0x08 0x1c>; /* set MCBSP1_CLKR */ |
| }; |
| }; |
| |
| /* devconf1 setup for tvout pins */ |
| pinmux_tv_out@480022d8 { |
| compatible = "pinctrl-single"; |
| reg = <0x480022d8 4>; /* CONTROL_DEVCONF1 */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-single,bit-per-mux; |
| pinctrl-single,register-width = <32>; |
| pinctrl-single,function-mask = <0x81>; /* TV out pin control */ |
| #pinctrl-cells = <2>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&tv_acbias_devconf1_pins>; |
| tv_acbias_devconf1_pins: pinmux_tv_acbias_devconf1_pins { |
| /* offset bits mask */ |
| pinctrl-single,bits = <0x00 0x40800 0x40800>; /* set TVOUTBYPASS and TVOUTACEN */ |
| }; |
| }; |
| }; |
| |
| &omap3_pmx_wkup { |
| gpio1_pins: pinmux_gpio1_pins { |
| pinctrl-single,pins = < |
| OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */ |
| OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_clkout.gpio_10 */ |
| >; |
| }; |
| }; |
| |
| &omap3_pmx_core { |
| pinctrl-names = "default"; |
| pinctrl-0 = < |
| &hsusb2_pins |
| >; |
| |
| hsusb2_pins: pinmux_hsusb2_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ |
| OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ |
| OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */ |
| OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */ |
| OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */ |
| OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */ |
| >; |
| }; |
| |
| uart1_pins: pinmux_uart1_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ |
| OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */ |
| >; |
| }; |
| |
| uart2_pins: pinmux_uart2_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ |
| OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ |
| >; |
| }; |
| |
| uart3_pins: pinmux_uart3_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */ |
| OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */ |
| >; |
| }; |
| |
| mmc1_pins: pinmux_mmc1_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ |
| OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ |
| OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ |
| OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ |
| OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ |
| OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ |
| >; |
| }; |
| |
| backlight_pins: backlight_pins_pinmux { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x20ba, MUX_MODE3) /* gpt11/gpio57 */ |
| >; |
| }; |
| |
| dss_dpi_pins: pinmux_dss_dpi_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ |
| OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ |
| OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ |
| OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ |
| OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ |
| OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ |
| OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ |
| OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ |
| OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ |
| OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ |
| OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ |
| OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ |
| OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ |
| OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ |
| OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ |
| OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ |
| OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ |
| OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ |
| OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ |
| OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ |
| OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ |
| OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ |
| OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ |
| OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ |
| OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ |
| OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ |
| OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ |
| OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ |
| >; |
| }; |
| |
| gps_pins: pinmux_gps_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* gpio145 */ |
| >; |
| }; |
| |
| hdq_pins: hdq_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */ |
| >; |
| }; |
| |
| bmp085_pins: pinmux_bmp085_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x2136, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio113 */ |
| >; |
| }; |
| |
| bma180_pins: pinmux_bma180_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x213a, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio115 */ |
| >; |
| }; |
| |
| itg3200_pins: pinmux_itg3200_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x20b8, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio56 */ |
| >; |
| }; |
| |
| hmc5843_pins: pinmux_hmc5843_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x2134, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio112 */ |
| >; |
| }; |
| |
| penirq_pins: pinmux_penirq_pins { |
| pinctrl-single,pins = < |
| /* here we could enable to wakeup the cpu from suspend by a pen touch */ |
| OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio160 */ |
| >; |
| }; |
| |
| camera_pins: pinmux_camera_pins { |
| pinctrl-single,pins = < |
| /* set up parallel camera interface */ |
| OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_hs */ |
| OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_vs */ |
| OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE0) /* cam_xclka */ |
| OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_pclk */ |
| OMAP3_CORE1_IOPAD(0x2114, PIN_OUTPUT | MUX_MODE4) /* cam_fld = gpio_98 */ |
| OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d0 */ |
| OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d1 */ |
| OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d2 */ |
| OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d3 */ |
| OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d4 */ |
| OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d5 */ |
| OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d6 */ |
| OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d7 */ |
| OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d8 */ |
| OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d9 */ |
| OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */ |
| OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */ |
| OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT | MUX_MODE0) /* cam_xclkb */ |
| OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* cam_wen = gpio_167 */ |
| OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLDOWN | MUX_MODE4) /* cam_strobe */ |
| >; |
| }; |
| |
| mcbsp1_pins: pinmux_mcbsp1_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT | MUX_MODE4) /* mcbsp1_clkr.mcbsp1_clkr - gpio_156 FM interrupt */ |
| OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE0) /* mcbsp1_clkr.mcbsp1_fsr */ |
| OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dx */ |
| OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dr */ |
| /* mcbsp_clks is used as PENIRQ */ |
| /* OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT | MUX_MODE0) mcbsp_clks.mcbsp_clks */ |
| OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0) /* mcbsp_clks.mcbsp1_fsx */ |
| OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0) /* mcbsp1_clkx.mcbsp1_clkx */ |
| >; |
| }; |
| |
| mcbsp2_pins: pinmux_mcbsp2_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */ |
| OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_clkx */ |
| OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2_dr */ |
| OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2_dx */ |
| >; |
| }; |
| |
| mcbsp3_pins: pinmux_mcbsp3_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x216c, PIN_OUTPUT | MUX_MODE0) /* mcbsp3_dx.mcbsp3_dx */ |
| OMAP3_CORE1_IOPAD(0x216e, PIN_INPUT | MUX_MODE0) /* mcbsp3_dx.mcbsp3_dr */ |
| OMAP3_CORE1_IOPAD(0x2170, PIN_INPUT | MUX_MODE0) /* mcbsp3_clkx.mcbsp3_clkx */ |
| OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE0) /* mcbsp3_clkx.mcbsp3_fsx */ |
| >; |
| }; |
| |
| mcbsp4_pins: pinmux_mcbsp4_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcbsp4_clkx.mcbsp4_clkx */ |
| OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcbsp4_clkx.mcbsp4_dr */ |
| OMAP3_CORE1_IOPAD(0x218a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcbsp4_dx.mcbsp4_fsx */ |
| >; |
| }; |
| }; |
| |
| &omap3_pmx_core2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = < |
| &hsusb2_2_pins |
| >; |
| |
| hsusb2_2_pins: pinmux_hsusb2_2_pins { |
| pinctrl-single,pins = < |
| OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ |
| OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ |
| OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ |
| OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ |
| OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ |
| OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ |
| >; |
| }; |
| |
| spi_gpio_pins: spi_gpio_pinmux { |
| pinctrl-single,pins = < |
| OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE4) /* clk */ |
| OMAP3630_CORE2_IOPAD(0x25e6, PIN_OUTPUT | MUX_MODE4) /* cs */ |
| OMAP3630_CORE2_IOPAD(0x25e8, PIN_OUTPUT | MUX_MODE4) /* tx */ |
| OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE4) /* rx */ |
| >; |
| }; |
| }; |
| |
| &i2c1 { |
| clock-frequency = <2600000>; |
| |
| twl: twl@48 { |
| reg = <0x48>; |
| interrupts = <7>; /* SYS_NIRQ cascaded to intc */ |
| interrupt-parent = <&intc>; |
| |
| clocks = <&hfclk_26m>; |
| clock-names = "fck"; |
| |
| twl_audio: audio { |
| compatible = "ti,twl4030-audio"; |
| ti,enable-vibra = <1>; |
| codec { |
| ti,ramp_delay_value = <3>; |
| }; |
| }; |
| |
| twl_power: power { |
| compatible = "ti,twl4030-power-idle"; |
| ti,system-power-controller; |
| }; |
| }; |
| }; |
| |
| #include "twl4030.dtsi" |
| #include "twl4030_omap3.dtsi" |
| |
| &i2c2 { |
| clock-frequency = <400000>; |
| |
| /* pressure sensor */ |
| bmp085@77 { |
| compatible = "bosch,bmp085"; |
| reg = <0x77>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&bmp085_pins>; |
| interrupt-parent = <&gpio4>; |
| interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* GPIO_113 */ |
| vdda-supply = <&vio>; |
| vddd-supply = <&vio>; |
| }; |
| |
| /* accelerometer */ |
| bma180@41 { |
| compatible = "bosch,bma180"; |
| reg = <0x41>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&bma180_pins>; |
| interrupt-parent = <&gpio4>; |
| interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */ |
| }; |
| |
| /* gyroscope */ |
| itg3200@68 { |
| compatible = "invensense,itg3200"; |
| reg = <0x68>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&itg3200_pins>; |
| interrupt-parent = <&gpio2>; |
| interrupts = <24 IRQ_TYPE_EDGE_FALLING>; /* GPIO_56 */ |
| }; |
| |
| /* leds + gpios */ |
| tca6507: tca6507@45 { |
| compatible = "ti,tca6507"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x45>; |
| |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| gta04_led0: led@0 { |
| label = "gta04:red:aux"; |
| reg = <0x0>; |
| }; |
| |
| gta04_led1: led@1 { |
| label = "gta04:green:aux"; |
| reg = <0x1>; |
| }; |
| |
| gta04_led3: led@3 { |
| label = "gta04:red:power"; |
| reg = <0x3>; |
| linux,default-trigger = "default-on"; |
| }; |
| |
| gta04_led4: led@4 { |
| label = "gta04:green:power"; |
| reg = <0x4>; |
| }; |
| |
| wifi_reset: led@6 { |
| /* reference as <&tca_gpios 0 0> since it is currently the only GPIO */ |
| reg = <0x6>; |
| compatible = "gpio"; |
| }; |
| }; |
| |
| /* compass aka magnetometer */ |
| hmc5843@1e { |
| compatible = "honeywell,hmc5883l"; |
| reg = <0x1e>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hmc5843_pins>; |
| interrupt-parent = <&gpio4>; |
| interrupts = <16 IRQ_TYPE_EDGE_FALLING>; /* gpio112 */ |
| }; |
| |
| /* touchscreen */ |
| tsc2007@48 { |
| compatible = "ti,tsc2007"; |
| reg = <0x48>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&penirq_pins>; |
| interrupt-parent = <&gpio6>; |
| interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */ |
| gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* GPIO_160 */ |
| ti,x-plate-ohms = <600>; |
| touchscreen-size-x = <480>; |
| touchscreen-size-y = <640>; |
| touchscreen-max-pressure = <1000>; |
| touchscreen-fuzz-x = <3>; |
| touchscreen-fuzz-y = <8>; |
| touchscreen-fuzz-pressure = <10>; |
| touchscreen-inverted-y; |
| }; |
| |
| /* RFID EEPROM */ |
| m24lr64@50 { |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| }; |
| }; |
| |
| &i2c3 { |
| clock-frequency = <100000>; |
| }; |
| |
| &mcspi1 { |
| status = "disabled"; |
| }; |
| |
| &mcspi2 { |
| status = "disabled"; |
| }; |
| |
| &mcspi3 { |
| status = "disabled"; |
| }; |
| |
| &mcspi4 { |
| status = "disabled"; |
| }; |
| |
| &usb_otg_hs { |
| interface-type = <0>; |
| usb-phy = <&usb2_phy>; |
| phys = <&usb2_phy>; |
| phy-names = "usb2-phy"; |
| mode = <3>; |
| power = <50>; |
| }; |
| |
| &usbhshost { |
| port2-mode = "ehci-phy"; |
| }; |
| |
| &usbhsehci { |
| phys = <0 &hsusb2_phy>; |
| }; |
| |
| &mmc1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mmc1_pins>; |
| vmmc-supply = <&vmmc1>; |
| bus-width = <4>; |
| ti,non-removable; |
| broken-cd; /* hardware has no CD */ |
| }; |
| |
| &mmc2 { |
| vmmc-supply = <&vaux4>; |
| bus-width = <4>; |
| ti,non-removable; |
| cap-power-off-card; |
| mmc-pwrseq = <&wifi_pwrseq>; |
| }; |
| |
| &mmc3 { |
| status = "disabled"; |
| }; |
| |
| #define BIT(x) (1 << (x)) |
| &twl_gpio { |
| /* pullups: BIT(2) */ |
| ti,pullups = <BIT(2)>; |
| /* |
| * pulldowns: |
| * BIT(0), BIT(1), BIT(6), BIT(7), BIT(8), BIT(13) |
| * BIT(15), BIT(16), BIT(17) |
| */ |
| ti,pulldowns = <(BIT(0) | BIT(1) | BIT(6) | BIT(7) | BIT(8) | |
| BIT(13) | BIT(15) | BIT(16) | BIT(17))>; |
| }; |
| |
| &twl_keypad { |
| status = "disabled"; |
| }; |
| |
| &gpio1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&gpio1_pins>; |
| }; |
| |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart1_pins>; |
| }; |
| |
| &uart2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart2_pins>; |
| gnss: gnss { |
| compatible = "wi2wi,w2sg0004"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&gps_pins>; |
| sirf,onoff-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; |
| lna-supply = <&vsim>; |
| vcc-supply = <&ldo_3v3>; |
| }; |
| }; |
| |
| &uart3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart3_pins>; |
| interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; |
| }; |
| |
| &charger { |
| ti,bb-uvolt = <3200000>; |
| ti,bb-uamp = <150>; |
| }; |
| |
| /* spare */ |
| &vaux1 { |
| regulator-min-microvolt = <2500000>; |
| regulator-max-microvolt = <3000000>; |
| }; |
| |
| /* sensors */ |
| &vaux2 { |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <2800000>; |
| regulator-always-on; /* we should never switch off while vio is on! */ |
| }; |
| |
| /* camera */ |
| &vaux3 { |
| regulator-min-microvolt = <2500000>; |
| regulator-max-microvolt = <2500000>; |
| }; |
| |
| /* WLAN/BT */ |
| &vaux4 { |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <3150000>; |
| }; |
| |
| /* GPS LNA */ |
| &vsim { |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <3150000>; |
| }; |
| |
| /* Needed to power the DPI pins */ |
| |
| &vpll2 { |
| regulator-always-on; |
| }; |
| |
| &dss { |
| pinctrl-names = "default"; |
| pinctrl-0 = < &dss_dpi_pins >; |
| |
| status = "okay"; |
| vdds_dsi-supply = <&vpll2>; |
| |
| port { |
| dpi_out: endpoint { |
| remote-endpoint = <&lcd_in>; |
| data-lines = <24>; |
| }; |
| }; |
| }; |
| |
| &venc { |
| status = "okay"; |
| |
| vdda-supply = <&vdac>; |
| |
| port { |
| venc_out: endpoint { |
| remote-endpoint = <&opa_in>; |
| ti,channels = <1>; |
| ti,invert-polarity; |
| }; |
| }; |
| }; |
| |
| &gpmc { |
| ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ |
| |
| nand@0,0 { |
| compatible = "ti,omap2-nand"; |
| reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ |
| interrupt-parent = <&gpmc>; |
| interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ |
| <1 IRQ_TYPE_NONE>; /* termcount */ |
| ti,nand-ecc-opt = "ham1"; |
| rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ |
| nand-bus-width = <16>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| gpmc,device-width = <2>; |
| gpmc,cs-on-ns = <0>; |
| gpmc,cs-rd-off-ns = <44>; |
| gpmc,cs-wr-off-ns = <44>; |
| gpmc,adv-on-ns = <6>; |
| gpmc,adv-rd-off-ns = <34>; |
| gpmc,adv-wr-off-ns = <44>; |
| gpmc,oe-off-ns = <54>; |
| gpmc,we-off-ns = <40>; |
| gpmc,access-ns = <64>; |
| gpmc,rd-cycle-ns = <82>; |
| gpmc,wr-cycle-ns = <82>; |
| gpmc,wr-access-ns = <40>; |
| gpmc,wr-data-mux-bus-ns = <0>; |
| gpmc,sync-clk-ps = <0>; |
| |
| x-loader@0 { |
| label = "X-Loader"; |
| reg = <0 0x80000>; |
| }; |
| |
| bootloaders@80000 { |
| label = "U-Boot"; |
| reg = <0x80000 0x1c0000>; |
| }; |
| |
| bootloaders_env@240000 { |
| label = "U-Boot Env"; |
| reg = <0x240000 0x40000>; |
| }; |
| |
| kernel@280000 { |
| label = "Kernel"; |
| reg = <0x280000 0x600000>; |
| }; |
| |
| filesystem@880000 { |
| label = "File System"; |
| reg = <0x880000 0>; /* 0 = MTDPART_SIZ_FULL */ |
| }; |
| }; |
| }; |
| |
| &mcbsp1 { /* FM Transceiver PCM */ |
| status = "okay"; |
| #sound-dai-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mcbsp1_pins>; |
| }; |
| |
| &mcbsp2 { /* TPS65950 I2S */ |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mcbsp2_pins>; |
| }; |
| |
| &mcbsp3 { /* Bluetooth PCM */ |
| status = "okay"; |
| #sound-dai-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mcbsp3_pins>; |
| }; |
| |
| &mcbsp4 { /* GSM voice PCM */ |
| status = "okay"; |
| #sound-dai-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mcbsp4_pins>; |
| }; |
| |
| &hdqw1w { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hdq_pins>; |
| }; |
| |
| /* image signal processor within OMAP3 SoC */ |
| &isp { |
| ports { |
| port@0 { |
| reg = <0>; |
| parallel_ep: endpoint { |
| ti,isp-clock-divisor = <1>; |
| ti,strobe-mode; |
| bus-width = <8>;/* Used data lines */ |
| data-shift = <2>; /* Lines 9:2 are used */ |
| hsync-active = <0>; /* Active low */ |
| vsync-active = <1>; /* Active high */ |
| data-active = <1>;/* Active high */ |
| pclk-sample = <1>;/* Falling */ |
| }; |
| }; |
| /* port@1 and port@2 are not used by GTA04 */ |
| }; |
| }; |
