| # SPDX-License-Identifier: GPL-2.0-only |
| # |
| # HID driver configuration |
| # |
| menu "HID support" |
| depends on INPUT |
| |
| config HID |
| tristate "HID bus support" |
| depends on INPUT |
| default y |
| help |
| A human interface device (HID) is a type of computer device that |
| interacts directly with and takes input from humans. The term "HID" |
| most commonly used to refer to the USB-HID specification, but other |
| devices (such as, but not strictly limited to, Bluetooth) are |
| designed using HID specification (this involves certain keyboards, |
| mice, tablets, etc). This option adds the HID bus to the kernel, |
| together with generic HID layer code. The HID devices are added and |
| removed from the HID bus by the transport-layer drivers, such as |
| usbhid (USB_HID) and hidp (BT_HIDP). |
| |
| For docs and specs, see https://www.usb.org/developers/hidpage/ |
| |
| If unsure, say Y. |
| |
| if HID |
| |
| config HID_BATTERY_STRENGTH |
| bool "Battery level reporting for HID devices" |
| select POWER_SUPPLY |
| default n |
| help |
| This option adds support of reporting battery strength (for HID devices |
| that support this feature) through power_supply class so that userspace |
| tools, such as upower, can display it. |
| |
| config HIDRAW |
| bool "/dev/hidraw raw HID device support" |
| help |
| Say Y here if you want to support HID devices (from the USB |
| specification standpoint) that aren't strictly user interface |
| devices, like monitor controls and Uninterruptible Power Supplies. |
| |
| This module supports these devices separately using a separate |
| event interface on /dev/hidraw. |
| |
| There is also a /dev/hiddev configuration option in the USB HID |
| configuration menu. In comparison to hiddev, this device does not process |
| the hid events at all (no parsing, no lookups). This lets applications |
| to work on raw hid events when they want to, and avoid using transport-specific |
| userspace libhid/libusb libraries. |
| |
| If unsure, say Y. |
| |
| config UHID |
| tristate "User-space I/O driver support for HID subsystem" |
| default n |
| help |
| Say Y here if you want to provide HID I/O Drivers from user-space. |
| This allows to write I/O drivers in user-space and feed the data from |
| the device into the kernel. The kernel parses the HID reports, loads the |
| corresponding HID Device Driver or provides input devices on top of your |
| user-space device. |
| |
| This driver cannot be used to parse HID-reports in user-space and write |
| special HID-drivers. You should use hidraw for that. |
| Instead, this driver allows to write the transport-layer driver in |
| user-space like USB-HID and Bluetooth-HID do in kernel-space. |
| |
| If unsure, say N. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called uhid. |
| |
| config HID_GENERIC |
| tristate "Generic HID driver" |
| default HID |
| help |
| Support for generic devices on the HID bus. This includes most |
| keyboards and mice, joysticks, tablets and digitizers. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called hid-generic. |
| |
| If unsure, say Y. |
| |
| menu "Special HID drivers" |
| |
| config HID_A4TECH |
| tristate "A4TECH mice" |
| default !EXPERT |
| help |
| Support for some A4TECH mice with two scroll wheels. |
| |
| config HID_ACCUTOUCH |
| tristate "Accutouch touch device" |
| depends on USB_HID |
| help |
| This selects a driver for the Accutouch 2216 touch controller. |
| |
| The driver works around a problem in the reported device capabilities |
| which causes userspace to detect the device as a mouse rather than |
| a touchscreen. |
| |
| Say Y here if you have a Accutouch 2216 touch controller. |
| |
| config HID_ACRUX |
| tristate "ACRUX game controller support" |
| help |
| Say Y here if you want to enable support for ACRUX game controllers. |
| |
| config HID_ACRUX_FF |
| bool "ACRUX force feedback support" |
| depends on HID_ACRUX |
| select INPUT_FF_MEMLESS |
| help |
| Say Y here if you want to enable force feedback support for ACRUX |
| game controllers. |
| |
| config HID_APPLE |
| tristate "Apple {i,Power,Mac}Books" |
| depends on LEDS_CLASS |
| depends on NEW_LEDS |
| default !EXPERT |
| help |
| Support for some Apple devices which less or more break |
| HID specification. |
| |
| Say Y here if you want support for keyboards of Apple iBooks, PowerBooks, |
| MacBooks, MacBook Pros and Apple Aluminum. |
| |
| config HID_APPLEIR |
| tristate "Apple infrared receiver" |
| depends on (USB_HID) |
| help |
| Support for Apple infrared remote control. All the Apple computers from |
| 2005 onwards include such a port, except the unibody Macbook (2009), |
| and Mac Pros. This receiver is also used in the Apple TV set-top box |
| prior to the 2010 model. |
| |
| Say Y here if you want support for Apple infrared remote control. |
| |
| config HID_ASUS |
| tristate "Asus" |
| depends on USB_HID |
| depends on LEDS_CLASS |
| depends on ASUS_WMI || ASUS_WMI=n |
| select POWER_SUPPLY |
| help |
| Support for Asus notebook built-in keyboard and touchpad via i2c, and |
| the Asus Republic of Gamers laptop keyboard special keys. |
| |
| Supported devices: |
| - EeeBook X205TA |
| - VivoBook E200HA |
| - GL553V series |
| - GL753V series |
| |
| config HID_AUREAL |
| tristate "Aureal" |
| help |
| Support for Aureal Cy se W-01RN Remote Controller and other Aureal derived remotes. |
| |
| config HID_BELKIN |
| tristate "Belkin Flip KVM and Wireless keyboard" |
| default !EXPERT |
| help |
| Support for Belkin Flip KVM and Wireless keyboard. |
| |
| config HID_BETOP_FF |
| tristate "Betop Production Inc. force feedback support" |
| depends on USB_HID |
| select INPUT_FF_MEMLESS |
| help |
| Say Y here if you want to enable force feedback support for devices by |
| BETOP Production Ltd. |
| Currently the following devices are known to be supported: |
| - BETOP 2185 PC & BFM MODE |
| |
| config HID_BIGBEN_FF |
| tristate "BigBen Interactive Kids' gamepad support" |
| depends on USB_HID |
| depends on NEW_LEDS |
| depends on LEDS_CLASS |
| select INPUT_FF_MEMLESS |
| help |
| Support for the "Kid-friendly Wired Controller" PS3OFMINIPAD |
| gamepad made by BigBen Interactive, originally sold as a PS3 |
| accessory. This driver fixes input mapping and adds support for |
| force feedback effects and LEDs on the device. |
| |
| config HID_CHERRY |
| tristate "Cherry Cymotion keyboard" |
| default !EXPERT |
| help |
| Support for Cherry Cymotion keyboard. |
| |
| config HID_CHICONY |
| tristate "Chicony devices" |
| depends on USB_HID |
| default !EXPERT |
| help |
| Support for Chicony Tactical pad and special keys on Chicony keyboards. |
| |
| config HID_CORSAIR |
| tristate "Corsair devices" |
| depends on USB_HID && LEDS_CLASS |
| help |
| Support for Corsair devices that are not fully compliant with the |
| HID standard. |
| |
| Supported devices: |
| - Vengeance K90 |
| - Scimitar PRO RGB |
| |
| config HID_COUGAR |
| tristate "Cougar devices" |
| help |
| Support for Cougar devices that are not fully compliant with the |
| HID standard. |
| |
| Supported devices: |
| - Cougar 500k Gaming Keyboard |
| |
| config HID_MACALLY |
| tristate "Macally devices" |
| help |
| Support for Macally devices that are not fully compliant with the |
| HID standard. |
| |
| supported devices: |
| - Macally ikey keyboard |
| |
| config HID_PRODIKEYS |
| tristate "Prodikeys PC-MIDI Keyboard support" |
| depends on USB_HID && SND |
| select SND_RAWMIDI |
| help |
| Support for Prodikeys PC-MIDI Keyboard device support. |
| Say Y here to enable support for this device. |
| - Prodikeys PC-MIDI keyboard. |
| The Prodikeys PC-MIDI acts as a USB Audio device, with one MIDI |
| input and one MIDI output. These MIDI jacks appear as |
| a sound "card" in the ALSA sound system. |
| Note: if you say N here, this device will still function as a basic |
| multimedia keyboard, but will lack support for the musical keyboard |
| and some additional multimedia keys. |
| |
| config HID_CMEDIA |
| tristate "CMedia audio chips" |
| help |
| Support for CMedia CM6533 HID audio jack controls |
| and HS100B mute buttons. |
| |
| config HID_CP2112 |
| tristate "Silicon Labs CP2112 HID USB-to-SMBus Bridge support" |
| depends on USB_HID && HIDRAW && I2C && GPIOLIB |
| select GPIOLIB_IRQCHIP |
| help |
| Support for Silicon Labs CP2112 HID USB to SMBus Master Bridge. |
| This is a HID device driver which registers as an i2c adapter |
| and gpiochip to expose these functions of the CP2112. The |
| customizable USB descriptor fields are exposed as sysfs attributes. |
| |
| config HID_CREATIVE_SB0540 |
| tristate "Creative SB0540 infrared receiver" |
| depends on USB_HID |
| help |
| Support for Creative infrared SB0540-compatible remote controls, such |
| as the RM-1500 and RM-1800 remotes. |
| |
| Say Y here if you want support for Creative SB0540 infrared receiver. |
| |
| config HID_CYPRESS |
| tristate "Cypress mouse and barcode readers" |
| default !EXPERT |
| help |
| Support for cypress mouse and barcode readers. |
| |
| config HID_DRAGONRISE |
| tristate "DragonRise Inc. game controller" |
| help |
| Say Y here if you have DragonRise Inc. game controllers. |
| These might be branded as: |
| - Tesun USB-703 |
| - Media-tech MT1504 "Rogue" |
| - DVTech JS19 "Gear" |
| - Defender Game Master |
| |
| config DRAGONRISE_FF |
| bool "DragonRise Inc. force feedback" |
| depends on HID_DRAGONRISE |
| select INPUT_FF_MEMLESS |
| help |
| Say Y here if you want to enable force feedback support for DragonRise Inc. |
| game controllers. |
| |
| config HID_EMS_FF |
| tristate "EMS Production Inc. force feedback support" |
| select INPUT_FF_MEMLESS |
| help |
| Say Y here if you want to enable force feedback support for devices by |
| EMS Production Ltd. |
| Currently the following devices are known to be supported: |
| - Trio Linker Plus II |
| |
| config HID_ELAN |
| tristate "ELAN USB Touchpad Support" |
| depends on LEDS_CLASS && USB_HID |
| help |
| Say Y to enable support for the USB ELAN touchpad |
| Currently the following devices are known to be supported: |
| - HP Pavilion X2 10-p0XX. |
| |
| config HID_ELECOM |
| tristate "ELECOM HID devices" |
| help |
| Support for ELECOM devices: |
| - BM084 Bluetooth Mouse |
| - EX-G Trackballs (M-XT3DRBK, M-XT3URBK) |
| - DEFT Trackballs (M-DT1DRBK, M-DT1URBK, M-DT2DRBK, M-DT2URBK) |
| - HUGE Trackballs (M-HT1DRBK, M-HT1URBK) |
| |
| config HID_ELO |
| tristate "ELO USB 4000/4500 touchscreen" |
| depends on USB_HID |
| help |
| Support for the ELO USB 4000/4500 touchscreens. Note that this is for |
| different devices than those handled by CONFIG_TOUCHSCREEN_USB_ELO. |
| |
| config HID_EZKEY |
| tristate "Ezkey BTC 8193 keyboard" |
| default !EXPERT |
| help |
| Support for Ezkey BTC 8193 keyboard. |
| |
| config HID_FT260 |
| tristate "FTDI FT260 USB HID to I2C host support" |
| depends on USB_HID && HIDRAW && I2C |
| help |
| Provides I2C host adapter functionality over USB-HID through FT260 |
| device. The customizable USB descriptor fields are exposed as sysfs |
| attributes. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called hid-ft260. |
| |
| config HID_GEMBIRD |
| tristate "Gembird Joypad" |
| help |
| Support for Gembird JPD-DualForce 2. |
| |
| config HID_GFRM |
| tristate "Google Fiber TV Box remote control support" |
| help |
| Support for Google Fiber TV Box remote controls |
| |
| config HID_GLORIOUS |
| tristate "Glorious PC Gaming Race mice" |
| help |
| Support for Glorious PC Gaming Race mice such as |
| the Glorious Model O, O- and D. |
| |
| config HID_HOLTEK |
| tristate "Holtek HID devices" |
| depends on USB_HID |
| help |
| Support for Holtek based devices: |
| - Holtek On Line Grip based game controller |
| - Trust GXT 18 Gaming Keyboard |
| - Sharkoon Drakonia / Perixx MX-2000 gaming mice |
| - Tracer Sniper TRM-503 / NOVA Gaming Slider X200 / |
| Zalman ZM-GM1 |
| - SHARKOON DarkGlider Gaming mouse |
| - LEETGION Hellion Gaming Mouse |
| |
| config HOLTEK_FF |
| bool "Holtek On Line Grip force feedback support" |
| depends on HID_HOLTEK |
| select INPUT_FF_MEMLESS |
| help |
| Say Y here if you have a Holtek On Line Grip based game controller |
| and want to have force feedback support for it. |
| |
| config HID_VIVALDI_COMMON |
| tristate |
| help |
| ChromeOS Vivaldi HID parsing support library. This is a hidden |
| option so that drivers can use common code to parse the HID |
| descriptors for vivaldi function row keymap. |
| |
| config HID_GOOGLE_HAMMER |
| tristate "Google Hammer Keyboard" |
| select HID_VIVALDI_COMMON |
| select INPUT_VIVALDIFMAP |
| depends on USB_HID && LEDS_CLASS && CROS_EC |
| help |
| Say Y here if you have a Google Hammer device. |
| |
| config HID_VIVALDI |
| tristate "Vivaldi Keyboard" |
| select HID_VIVALDI_COMMON |
| select INPUT_VIVALDIFMAP |
| help |
| Say Y here if you want to enable support for Vivaldi keyboards. |
| |
| Vivaldi keyboards use a vendor-specific (Google) HID usage to report |
| how the keys in the top row are physically ordered. |
| |
| config HID_GT683R |
| tristate "MSI GT68xR LED support" |
| depends on LEDS_CLASS && USB_HID |
| help |
| Say Y here if you want to enable support for the three MSI GT68xR LEDs |
| |
| This driver support following modes: |
| - Normal: LEDs are fully on when enabled |
| - Audio: LEDs brightness depends on sound level |
| - Breathing: LEDs brightness varies at human breathing rate |
| |
| Currently the following devices are know to be supported: |
| - MSI GT683R |
| |
| config HID_KEYTOUCH |
| tristate "Keytouch HID devices" |
| help |
| Support for Keytouch HID devices not fully compliant with |
| the specification. Currently supported: |
| - Keytouch IEC 60945 |
| |
| config HID_KYE |
| tristate "KYE/Genius devices" |
| help |
| Support for KYE/Genius devices not fully compliant with HID standard: |
| - Ergo Mouse |
| - EasyPen i405X tablet |
| - MousePen i608X tablet |
| - EasyPen M610X tablet |
| |
| config HID_UCLOGIC |
| tristate "UC-Logic" |
| depends on USB_HID |
| help |
| Support for UC-Logic and Huion tablets. |
| |
| config HID_WALTOP |
| tristate "Waltop" |
| help |
| Support for Waltop tablets. |
| |
| config HID_VIEWSONIC |
| tristate "ViewSonic/Signotec" |
| help |
| Support for ViewSonic/Signotec PD1011 signature pad. |
| |
| config HID_VRC2 |
| tristate "VRC-2 Car Controller" |
| depends on HID |
| help |
| Support for VRC-2 which is a 2-axis controller often used in |
| car simulators. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called hid-vrc2. |
| |
| config HID_XIAOMI |
| tristate "Xiaomi" |
| help |
| Adds support for side buttons of Xiaomi Mi Dual Mode Wireless |
| Mouse Silent Edition. |
| |
| config HID_GYRATION |
| tristate "Gyration remote control" |
| help |
| Support for Gyration remote control. |
| |
| config HID_ICADE |
| tristate "ION iCade arcade controller" |
| help |
| Support for the ION iCade arcade controller to work as a joystick. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called hid-icade. |
| |
| config HID_ITE |
| tristate "ITE devices" |
| default !EXPERT |
| help |
| Support for ITE devices not fully compliant with HID standard. |
| |
| config HID_JABRA |
| tristate "Jabra USB HID Driver" |
| help |
| Support for Jabra USB HID devices. |
| |
| Prevents mapping of vendor defined HID usages to input events. Without |
| this driver HID reports from Jabra devices may incorrectly be seen as |
| mouse button events. |
| Say M here if you may ever plug in a Jabra USB device. |
| |
| config HID_TWINHAN |
| tristate "Twinhan IR remote control" |
| help |
| Support for Twinhan IR remote control. |
| |
| config HID_KENSINGTON |
| tristate "Kensington Slimblade Trackball" |
| default !EXPERT |
| help |
| Support for Kensington Slimblade Trackball. |
| |
| config HID_LCPOWER |
| tristate "LC-Power" |
| help |
| Support for LC-Power RC1000MCE RF remote control. |
| |
| config HID_LED |
| tristate "Simple RGB LED support" |
| depends on LEDS_CLASS |
| help |
| Support for simple RGB LED devices. Currently supported are: |
| - Riso Kagaku Webmail Notifier |
| - Dream Cheeky Webmail Notifier and Friends Alert |
| - ThingM blink(1) |
| - Delcom Visual Signal Indicator Generation 2 |
| - Greynut Luxafor |
| |
| To compile this driver as a module, choose M here: the |
| module will be called hid-led. |
| |
| config HID_LENOVO |
| tristate "Lenovo / Thinkpad devices" |
| select NEW_LEDS |
| select LEDS_CLASS |
| help |
| Support for IBM/Lenovo devices that are not fully compliant with HID standard. |
| |
| Say Y if you want support for horizontal scrolling of the IBM/Lenovo |
| Scrollpoint mice or the non-compliant features of the Lenovo Thinkpad |
| standalone keyboards, e.g: |
| - ThinkPad USB Keyboard with TrackPoint (supports extra LEDs and trackpoint |
| configuration) |
| - ThinkPad Compact Bluetooth Keyboard with TrackPoint (supports Fn keys) |
| - ThinkPad Compact USB Keyboard with TrackPoint (supports Fn keys) |
| |
| config HID_LETSKETCH |
| tristate "Letsketch WP9620N tablets" |
| depends on USB_HID |
| help |
| Driver for the LetSketch / VSON WP9620N drawing tablet. This |
| drawing tablet is also sold under other brand names such as Case U, |
| presumably this driver will work for all of them. But it has only been |
| tested with a LetSketch WP9620N model. |
| |
| These tablets also work without a special HID driver, but then only |
| part of the active area works and both the pad and stylus buttons are |
| hardwired to special key-combos. E.g. the 2 stylus buttons send right |
| mouse clicks / resp. "e" key presses. |
| |
| config HID_LOGITECH |
| tristate "Logitech devices" |
| depends on USB_HID |
| depends on LEDS_CLASS |
| default !EXPERT |
| help |
| Support for Logitech devices that are not fully compliant with HID standard. |
| |
| config HID_LOGITECH_DJ |
| tristate "Logitech receivers full support" |
| depends on USB_HID |
| depends on HIDRAW |
| depends on HID_LOGITECH |
| select HID_LOGITECH_HIDPP |
| help |
| Say Y if you want support for Logitech receivers and devices. |
| Logitech receivers are capable of pairing multiple Logitech compliant |
| devices to the same receiver. Without this driver it will be handled by |
| generic USB_HID driver and all incoming events will be multiplexed |
| into a single mouse and a single keyboard device. |
| |
| config HID_LOGITECH_HIDPP |
| tristate "Logitech HID++ devices support" |
| depends on HID_LOGITECH |
| select POWER_SUPPLY |
| help |
| Support for Logitech devices relying on the HID++ Logitech specification |
| |
| Say Y if you want support for Logitech devices relying on the HID++ |
| specification. Such devices are the various Logitech Touchpads (T650, |
| T651, TK820), some mice (Zone Touch mouse), or even keyboards (Solar |
| Keyboard). |
| |
| config LOGITECH_FF |
| bool "Logitech force feedback support" |
| depends on HID_LOGITECH |
| select INPUT_FF_MEMLESS |
| help |
| Say Y here if you have one of these devices: |
| - Logitech WingMan Cordless RumblePad |
| - Logitech WingMan Cordless RumblePad 2 |
| - Logitech WingMan Force 3D |
| |
| and if you want to enable force feedback for them. |
| Note: if you say N here, this device will still be supported, but without |
| force feedback. |
| |
| config LOGIRUMBLEPAD2_FF |
| bool "Logitech force feedback support (variant 2)" |
| depends on HID_LOGITECH |
| select INPUT_FF_MEMLESS |
| help |
| Say Y here if you want to enable force feedback support for: |
| - Logitech RumblePad |
| - Logitech Rumblepad 2 |
| - Logitech Formula Vibration Feedback Wheel |
| |
| config LOGIG940_FF |
| bool "Logitech Flight System G940 force feedback support" |
| depends on HID_LOGITECH |
| select INPUT_FF_MEMLESS |
| help |
| Say Y here if you want to enable force feedback support for Logitech |
| Flight System G940 devices. |
| |
| config LOGIWHEELS_FF |
| bool "Logitech wheels configuration and force feedback support" |
| depends on HID_LOGITECH |
| select INPUT_FF_MEMLESS |
| default LOGITECH_FF |
| help |
| Say Y here if you want to enable force feedback and range setting(*) |
| support for following Logitech wheels: |
| - Logitech G25 (*) |
| - Logitech G27 (*) |
| - Logitech G29 (*) |
| - Logitech Driving Force |
| - Logitech Driving Force Pro (*) |
| - Logitech Driving Force GT (*) |
| - Logitech Driving Force EX/RX |
| - Logitech Driving Force Wireless |
| - Logitech Speed Force Wireless |
| - Logitech MOMO Force |
| - Logitech MOMO Racing Force |
| - Logitech Formula Force GP |
| - Logitech Formula Force EX/RX |
| - Logitech Wingman Formula Force GP |
| |
| config HID_MAGICMOUSE |
| tristate "Apple Magic Mouse/Trackpad multi-touch support" |
| help |
| Support for the Apple Magic Mouse/Trackpad multi-touch. |
| |
| Say Y here if you want support for the multi-touch features of the |
| Apple Wireless "Magic" Mouse and the Apple Wireless "Magic" Trackpad. |
| |
| config HID_MALTRON |
| tristate "Maltron L90 keyboard" |
| help |
| Adds support for the volume up, volume down, mute, and play/pause buttons |
| of the Maltron L90 keyboard. |
| |
| config HID_MAYFLASH |
| tristate "Mayflash game controller adapter force feedback" |
| select INPUT_FF_MEMLESS |
| help |
| Say Y here if you have HJZ Mayflash PS3 game controller adapters |
| and want to enable force feedback support. |
| |
| config HID_MEGAWORLD_FF |
| tristate "Mega World based game controller force feedback support" |
| depends on USB_HID |
| select INPUT_FF_MEMLESS |
| help |
| Say Y here if you have a Mega World based game controller and want |
| to have force feedback support for it. |
| |
| config HID_REDRAGON |
| tristate "Redragon keyboards" |
| default !EXPERT |
| help |
| Support for Redragon keyboards that need fix-ups to work properly. |
| |
| config HID_MICROSOFT |
| tristate "Microsoft non-fully HID-compliant devices" |
| default !EXPERT |
| select INPUT_FF_MEMLESS |
| help |
| Support for Microsoft devices that are not fully compliant with HID standard. |
| |
| config HID_MONTEREY |
| tristate "Monterey Genius KB29E keyboard" |
| default !EXPERT |
| help |
| Support for Monterey Genius KB29E. |
| |
| config HID_MULTITOUCH |
| tristate "HID Multitouch panels" |
| help |
| Generic support for HID multitouch panels. |
| |
| Say Y here if you have one of the following devices: |
| - 3M PCT touch screens |
| - ActionStar dual touch panels |
| - Atmel panels |
| - Cando dual touch panels |
| - Chunghwa panels |
| - CJTouch panels |
| - CVTouch panels |
| - Cypress TrueTouch panels |
| - Elan Microelectronics touch panels |
| - Elo TouchSystems IntelliTouch Plus panels |
| - GeneralTouch 'Sensing Win7-TwoFinger' panels |
| - GoodTouch panels |
| - Hanvon dual touch panels |
| - Ilitek dual touch panels |
| - IrTouch Infrared USB panels |
| - LG Display panels (Dell ST2220Tc) |
| - Lumio CrystalTouch panels |
| - MosArt dual-touch panels |
| - Panasonic multitouch panels |
| - PenMount dual touch panels |
| - Perixx Peripad 701 touchpad |
| - PixArt optical touch screen |
| - Pixcir dual touch panels |
| - Quanta panels |
| - eGalax dual-touch panels, including the Joojoo and Wetab tablets |
| - SiS multitouch panels |
| - Stantum multitouch panels |
| - Touch International Panels |
| - Unitec Panels |
| - Wistron optical touch panels |
| - XAT optical touch panels |
| - Xiroku optical touch panels |
| - Zytronic touch panels |
| |
| If unsure, say N. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called hid-multitouch. |
| |
| config HID_NINTENDO |
| tristate "Nintendo Joy-Con and Pro Controller support" |
| depends on NEW_LEDS |
| depends on LEDS_CLASS |
| select POWER_SUPPLY |
| help |
| Adds support for the Nintendo Switch Joy-Cons and Pro Controller. |
| All controllers support bluetooth, and the Pro Controller also supports |
| its USB mode. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called hid-nintendo. |
| |
| config NINTENDO_FF |
| bool "Nintendo Switch controller force feedback support" |
| depends on HID_NINTENDO |
| select INPUT_FF_MEMLESS |
| help |
| Say Y here if you have a Nintendo Switch controller and want to enable |
| force feedback support for it. This works for both joy-cons and the pro |
| controller. For the pro controller, both rumble motors can be controlled |
| individually. |
| |
| config HID_NTI |
| tristate "NTI keyboard adapters" |
| help |
| Support for the "extra" Sun keyboard keys on keyboards attached |
| through Network Technologies USB-SUN keyboard adapters. |
| |
| config HID_NTRIG |
| tristate "N-Trig touch screen" |
| depends on USB_HID |
| help |
| Support for N-Trig touch screen. |
| |
| config HID_ORTEK |
| tristate "Ortek PKB-1700/WKB-2000/Skycable wireless keyboard and mouse trackpad" |
| help |
| There are certain devices which have LogicalMaximum wrong in the keyboard |
| usage page of their report descriptor. The most prevailing ones so far |
| are manufactured by Ortek, thus the name of the driver. Currently |
| supported devices by this driver are |
| |
| - Ortek PKB-1700 |
| - Ortek WKB-2000 |
| - Skycable wireless presenter |
| |
| config HID_PANTHERLORD |
| tristate "Pantherlord/GreenAsia game controller" |
| help |
| Say Y here if you have a PantherLord/GreenAsia based game controller |
| or adapter. |
| |
| config PANTHERLORD_FF |
| bool "Pantherlord force feedback support" |
| depends on HID_PANTHERLORD |
| select INPUT_FF_MEMLESS |
| help |
| Say Y here if you have a PantherLord/GreenAsia based game controller |
| or adapter and want to enable force feedback support for it. |
| |
| config HID_PENMOUNT |
| tristate "Penmount touch device" |
| depends on USB_HID |
| help |
| This selects a driver for the PenMount 6000 touch controller. |
| |
| The driver works around a problem in the report descript allowing |
| the userspace to touch events instead of mouse events. |
| |
| Say Y here if you have a Penmount based touch controller. |
| |
| config HID_PETALYNX |
| tristate "Petalynx Maxter remote control" |
| help |
| Support for Petalynx Maxter remote control. |
| |
| config HID_PICOLCD |
| tristate "PicoLCD (graphic version)" |
| help |
| This provides support for Minibox PicoLCD devices, currently |
| only the graphical ones are supported. |
| |
| This includes support for the following device features: |
| - Keypad |
| - Switching between Firmware and Flash mode |
| - EEProm / Flash access (via debugfs) |
| Features selectively enabled: |
| - Framebuffer for monochrome 256x64 display |
| - Backlight control |
| - Contrast control |
| - General purpose outputs |
| Features that are not (yet) supported: |
| - IR |
| |
| config HID_PICOLCD_FB |
| bool "Framebuffer support" if EXPERT |
| default !EXPERT |
| depends on HID_PICOLCD |
| depends on HID_PICOLCD=FB || FB=y |
| select FB_DEFERRED_IO |
| select FB_SYS_FILLRECT |
| select FB_SYS_COPYAREA |
| select FB_SYS_IMAGEBLIT |
| select FB_SYS_FOPS |
| help |
| Provide access to PicoLCD's 256x64 monochrome display via a |
| framebuffer device. |
| |
| config HID_PICOLCD_BACKLIGHT |
| bool "Backlight control" if EXPERT |
| default !EXPERT |
| depends on HID_PICOLCD |
| depends on HID_PICOLCD=BACKLIGHT_CLASS_DEVICE || BACKLIGHT_CLASS_DEVICE=y |
| help |
| Provide access to PicoLCD's backlight control via backlight |
| class. |
| |
| config HID_PICOLCD_LCD |
| bool "Contrast control" if EXPERT |
| default !EXPERT |
| depends on HID_PICOLCD |
| depends on HID_PICOLCD=LCD_CLASS_DEVICE || LCD_CLASS_DEVICE=y |
| help |
| Provide access to PicoLCD's LCD contrast via lcd class. |
| |
| config HID_PICOLCD_LEDS |
| bool "GPO via leds class" if EXPERT |
| default !EXPERT |
| depends on HID_PICOLCD |
| depends on HID_PICOLCD=LEDS_CLASS || LEDS_CLASS=y |
| help |
| Provide access to PicoLCD's GPO pins via leds class. |
| |
| config HID_PICOLCD_CIR |
| bool "CIR via RC class" if EXPERT |
| default !EXPERT |
| depends on HID_PICOLCD |
| depends on HID_PICOLCD=RC_CORE || RC_CORE=y |
| help |
| Provide access to PicoLCD's CIR interface via remote control (LIRC). |
| |
| config HID_PLANTRONICS |
| tristate "Plantronics USB HID Driver" |
| help |
| Provides HID support for Plantronics USB audio devices. |
| Correctly maps vendor unique volume up/down HID usages to |
| KEY_VOLUMEUP and KEY_VOLUMEDOWN events and prevents core mapping |
| of other vendor unique HID usages to random mouse events. |
| |
| Say M here if you may ever plug in a Plantronics USB audio device. |
| |
| config HID_PLAYSTATION |
| tristate "PlayStation HID Driver" |
| depends on LEDS_CLASS_MULTICOLOR |
| select CRC32 |
| select POWER_SUPPLY |
| help |
| Provides support for Sony PS5 controllers including support for |
| its special functionalities e.g. touchpad, lights and motion |
| sensors. |
| |
| config PLAYSTATION_FF |
| bool "PlayStation force feedback support" |
| depends on HID_PLAYSTATION |
| select INPUT_FF_MEMLESS |
| help |
| Say Y here if you would like to enable force feedback support for |
| PlayStation game controllers. |
| |
| config HID_PXRC |
| tristate "PhoenixRC HID Flight Controller" |
| depends on HID |
| help |
| Support for PhoenixRC HID Flight Controller, a 8-axis flight controller. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called hid-pxrc. |
| |
| config HID_RAZER |
| tristate "Razer non-fully HID-compliant devices" |
| help |
| Support for Razer devices that are not fully compliant with the |
| HID standard. |
| |
| config HID_PRIMAX |
| tristate "Primax non-fully HID-compliant devices" |
| help |
| Support for Primax devices that are not fully compliant with the |
| HID standard. |
| |
| config HID_RETRODE |
| tristate "Retrode 2 USB adapter for vintage video games" |
| depends on USB_HID |
| help |
| Support for |
| * Retrode 2 cartridge and controller adapter |
| |
| config HID_ROCCAT |
| tristate "Roccat device support" |
| depends on USB_HID |
| help |
| Support for Roccat devices. |
| Say Y here if you have a Roccat mouse or keyboard and want |
| support for its special functionalities. |
| |
| config HID_SAITEK |
| tristate "Saitek (Mad Catz) non-fully HID-compliant devices" |
| help |
| Support for Saitek devices that are not fully compliant with the |
| HID standard. |
| |
| Supported devices: |
| - PS1000 Dual Analog Pad |
| - Saitek R.A.T.7, R.A.T.9, M.M.O.7 Gaming Mice |
| - Mad Catz R.A.T.5, R.A.T.9 Gaming Mice |
| |
| config HID_SAMSUNG |
| tristate "Samsung InfraRed remote control or keyboards" |
| depends on USB_HID |
| help |
| Support for Samsung InfraRed remote control or keyboards. |
| |
| config HID_SEMITEK |
| tristate "Semitek USB keyboards" |
| help |
| Support for Semitek USB keyboards that are not fully compliant |
| with the HID standard. |
| |
| There are many variants, including: |
| - GK61, GK64, GK68, GK84, GK96, etc. |
| - SK61, SK64, SK68, SK84, SK96, etc. |
| - Dierya DK61/DK66 |
| - Tronsmart TK09R |
| - Woo-dy |
| - X-Bows Nature/Knight |
| |
| config HID_SIGMAMICRO |
| tristate "SiGma Micro-based keyboards" |
| depends on USB_HID |
| help |
| Support for keyboards that use the SiGma Micro (a.k.a SigmaChip) IC. |
| |
| Supported devices: |
| - Landslides KR-700 |
| - Rapoo V500 |
| |
| config HID_SONY |
| tristate "Sony PS2/3/4 accessories" |
| depends on USB_HID |
| depends on NEW_LEDS |
| depends on LEDS_CLASS |
| select POWER_SUPPLY |
| select CRC32 |
| help |
| Support for |
| |
| * Sony PS3 6-axis controllers |
| * Sony PS4 DualShock 4 controllers |
| * Buzz controllers |
| * Sony PS3 Blue-ray Disk Remote Control (Bluetooth) |
| * Logitech Harmony adapter for Sony Playstation 3 (Bluetooth) |
| * Guitar Hero Live PS3, Wii U and PS4 guitar dongles |
| * Guitar Hero PS3 and PC guitar dongles |
| |
| config SONY_FF |
| bool "Sony PS2/3/4 accessories force feedback support" |
| depends on HID_SONY |
| select INPUT_FF_MEMLESS |
| help |
| Say Y here if you have a Sony PS2/3/4 accessory and want to enable |
| force feedback support for it. |
| |
| config HID_SPEEDLINK |
| tristate "Speedlink VAD Cezanne mouse support" |
| help |
| Support for Speedlink Vicious and Divine Cezanne mouse. |
| |
| config HID_STEAM |
| tristate "Steam Controller support" |
| select POWER_SUPPLY |
| help |
| Say Y here if you have a Steam Controller if you want to use it |
| without running the Steam Client. It supports both the wired and |
| the wireless adaptor. |
| |
| config HID_STEELSERIES |
| tristate "Steelseries SRW-S1 steering wheel support" |
| help |
| Support for Steelseries SRW-S1 steering wheel |
| |
| config HID_SUNPLUS |
| tristate "Sunplus wireless desktop" |
| help |
| Support for Sunplus wireless desktop. |
| |
| config HID_RMI |
| tristate "Synaptics RMI4 device support" |
| select RMI4_CORE |
| select RMI4_F03 |
| select RMI4_F11 |
| select RMI4_F12 |
| select RMI4_F30 |
| help |
| Support for Synaptics RMI4 touchpads. |
| Say Y here if you have a Synaptics RMI4 touchpads over i2c-hid or usbhid |
| and want support for its special functionalities. |
| |
| config HID_GREENASIA |
| tristate "GreenAsia (Product ID 0x12) game controller support" |
| help |
| Say Y here if you have a GreenAsia (Product ID 0x12) based game |
| controller or adapter. |
| |
| config GREENASIA_FF |
| bool "GreenAsia (Product ID 0x12) force feedback support" |
| depends on HID_GREENASIA |
| select INPUT_FF_MEMLESS |
| help |
| Say Y here if you have a GreenAsia (Product ID 0x12) based game controller |
| (like MANTA Warrior MM816 and SpeedLink Strike2 SL-6635) or adapter |
| and want to enable force feedback support for it. |
| |
| config HID_HYPERV_MOUSE |
| tristate "Microsoft Hyper-V mouse driver" |
| depends on HYPERV |
| help |
| Select this option to enable the Hyper-V mouse driver. |
| |
| config HID_SMARTJOYPLUS |
| tristate "SmartJoy PLUS PS2/USB adapter support" |
| help |
| Support for SmartJoy PLUS PS2/USB adapter, Super Dual Box, |
| Super Joy Box 3 Pro, Super Dual Box Pro, and Super Joy Box 5 Pro. |
| |
| Note that DDR (Dance Dance Revolution) mode is not supported, nor |
| is pressure sensitive buttons on the pro models. |
| |
| config SMARTJOYPLUS_FF |
| bool "SmartJoy PLUS PS2/USB adapter force feedback support" |
| depends on HID_SMARTJOYPLUS |
| select INPUT_FF_MEMLESS |
| help |
| Say Y here if you have a SmartJoy PLUS PS2/USB adapter and want to |
| enable force feedback support for it. |
| |
| config HID_TIVO |
| tristate "TiVo Slide Bluetooth remote control support" |
| help |
| Say Y if you have a TiVo Slide Bluetooth remote control. |
| |
| config HID_TOPSEED |
| tristate "TopSeed Cyberlink, BTC Emprex, Conceptronic remote control support" |
| help |
| Say Y if you have a TopSeed Cyberlink or BTC Emprex or Conceptronic |
| CLLRCMCE remote control. |
| |
| config HID_TOPRE |
| tristate "Topre REALFORCE keyboards" |
| depends on HID |
| help |
| Say Y for N-key rollover support on Topre REALFORCE R2 108 key keyboards. |
| |
| config HID_THINGM |
| tristate "ThingM blink(1) USB RGB LED" |
| depends on LEDS_CLASS |
| select HID_LED |
| help |
| Support for the ThingM blink(1) USB RGB LED. This driver has been |
| merged into the generic hid led driver. Config symbol HID_THINGM |
| just selects HID_LED and will be removed soon. |
| |
| config HID_THRUSTMASTER |
| tristate "ThrustMaster devices support" |
| depends on USB_HID |
| help |
| Say Y here if you have a THRUSTMASTER FireStore Dual Power 2, |
| a THRUSTMASTER Ferrari GT Rumble Wheel or Thrustmaster FFB |
| Wheel (T150RS, T300RS, T300 Ferrari Alcantara Edition, T500RS). |
| |
| config THRUSTMASTER_FF |
| bool "ThrustMaster devices force feedback support" |
| depends on HID_THRUSTMASTER |
| select INPUT_FF_MEMLESS |
| help |
| Say Y here if you have a THRUSTMASTER FireStore Dual Power 2 or 3, |
| a THRUSTMASTER Dual Trigger 3-in-1 or a THRUSTMASTER Ferrari GT |
| Rumble Force or Force Feedback Wheel. |
| |
| config HID_UDRAW_PS3 |
| tristate "THQ PS3 uDraw tablet" |
| help |
| Say Y here if you want to use the THQ uDraw gaming tablet for |
| the PS3. |
| |
| config HID_U2FZERO |
| tristate "U2F Zero LED and RNG support" |
| depends on USB_HID |
| depends on LEDS_CLASS |
| depends on HW_RANDOM |
| help |
| Support for the LED of the U2F Zero device. |
| |
| U2F Zero supports custom commands for blinking the LED |
| and getting data from the internal hardware RNG. |
| The internal hardware can be used to feed the enthropy pool. |
| |
| U2F Zero only supports blinking its LED, so this driver doesn't |
| allow setting the brightness to anything but 1, which will |
| trigger a single blink and immediately reset back to 0. |
| |
| config HID_WACOM |
| tristate "Wacom Intuos/Graphire tablet support (USB)" |
| depends on USB_HID |
| select POWER_SUPPLY |
| select NEW_LEDS |
| select LEDS_CLASS |
| select LEDS_TRIGGERS |
| help |
| Say Y here if you want to use the USB or BT version of the Wacom Intuos |
| or Graphire tablet. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called wacom. |
| |
| config HID_WIIMOTE |
| tristate "Nintendo Wii / Wii U peripherals" |
| depends on LEDS_CLASS |
| select POWER_SUPPLY |
| select INPUT_FF_MEMLESS |
| help |
| Support for Nintendo Wii and Wii U Bluetooth peripherals. Supported |
| devices are the Wii Remote and its extension devices, but also devices |
| based on the Wii Remote like the Wii U Pro Controller or the |
| Wii Balance Board. |
| |
| Support for all official Nintendo extensions is available, however, 3rd |
| party extensions might not be supported. Please report these devices to: |
| http://github.com/dvdhrm/xwiimote/issues |
| |
| Other Nintendo Wii U peripherals that are IEEE 802.11 based (including |
| the Wii U Gamepad) might be supported in the future. But currently |
| support is limited to Bluetooth based devices. |
| |
| If unsure, say N. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called hid-wiimote. |
| |
| config HID_XINMO |
| tristate "Xin-Mo non-fully compliant devices" |
| help |
| Support for Xin-Mo devices that are not fully compliant with the HID |
| standard. Currently only supports the Xin-Mo Dual Arcade. Say Y here |
| if you have a Xin-Mo Dual Arcade controller. |
| |
| config HID_ZEROPLUS |
| tristate "Zeroplus based game controller support" |
| help |
| Say Y here if you have a Zeroplus based game controller. |
| |
| config ZEROPLUS_FF |
| bool "Zeroplus based game controller force feedback support" |
| depends on HID_ZEROPLUS |
| select INPUT_FF_MEMLESS |
| help |
| Say Y here if you have a Zeroplus based game controller and want |
| to have force feedback support for it. |
| |
| config HID_ZYDACRON |
| tristate "Zydacron remote control support" |
| help |
| Support for Zydacron remote control. |
| |
| config HID_SENSOR_HUB |
| tristate "HID Sensors framework support" |
| depends on HAS_IOMEM |
| select MFD_CORE |
| default n |
| help |
| Support for HID Sensor framework. This creates a MFD instance |
| for a sensor hub and identifies all the sensors connected to it. |
| Each sensor is registered as a MFD cell, so that sensor specific |
| processing can be done in a separate driver. Each sensor |
| drivers can use the service provided by this driver to register |
| for events and handle data streams. Each sensor driver can format |
| data and present to user mode using input or IIO interface. |
| |
| config HID_SENSOR_CUSTOM_SENSOR |
| tristate "HID Sensors hub custom sensor support" |
| depends on HID_SENSOR_HUB |
| default n |
| help |
| HID Sensor hub specification allows definition of some custom and |
| generic sensors. Unlike other HID sensors, they can't be exported |
| via Linux IIO because of custom fields. This is up to the manufacturer |
| to decide how to interpret these special sensor ids and process in |
| the user space. Currently some manufacturers are using these ids for |
| sensor calibration and debugging other sensors. Manufacturers |
| shouldn't use these special custom sensor ids to export any of the |
| standard sensors. |
| Select this config option for custom/generic sensor support. |
| |
| config HID_ALPS |
| tristate "Alps HID device support" |
| help |
| Support for Alps I2C HID touchpads and StickPointer. |
| Say Y here if you have a Alps touchpads over i2c-hid or usbhid |
| and want support for its special functionalities. |
| |
| config HID_MCP2221 |
| tristate "Microchip MCP2221 HID USB-to-I2C/SMbus host support" |
| depends on USB_HID && I2C |
| depends on GPIOLIB |
| help |
| Provides I2C and SMBUS host adapter functionality over USB-HID |
| through MCP2221 device. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called hid-mcp2221.ko. |
| |
| config HID_KUNIT_TEST |
| tristate "KUnit tests for HID" if !KUNIT_ALL_TESTS |
| depends on KUNIT |
| depends on HID_BATTERY_STRENGTH |
| depends on HID_UCLOGIC |
| default KUNIT_ALL_TESTS |
| help |
| This builds unit tests for HID. This option is not useful for |
| distributions or general kernels, but only for kernel |
| developers working on HID and associated drivers. |
| |
| For more information on KUnit and unit tests in general, |
| please refer to the KUnit documentation in |
| Documentation/dev-tools/kunit/. |
| |
| If in doubt, say "N". |
| |
| endmenu |
| |
| endif # HID |
| |
| source "drivers/hid/usbhid/Kconfig" |
| |
| source "drivers/hid/i2c-hid/Kconfig" |
| |
| source "drivers/hid/intel-ish-hid/Kconfig" |
| |
| source "drivers/hid/amd-sfh-hid/Kconfig" |
| |
| source "drivers/hid/surface-hid/Kconfig" |
| |
| endmenu |
