| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * tps65023-regulator.c |
| * |
| * Supports TPS65023 Regulator |
| * |
| * Copyright (C) 2009 Texas Instrument Incorporated - https://www.ti.com/ |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/err.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/i2c.h> |
| #include <linux/slab.h> |
| #include <linux/regmap.h> |
| |
| /* Register definitions */ |
| #define TPS65023_REG_VERSION 0 |
| #define TPS65023_REG_PGOODZ 1 |
| #define TPS65023_REG_MASK 2 |
| #define TPS65023_REG_REG_CTRL 3 |
| #define TPS65023_REG_CON_CTRL 4 |
| #define TPS65023_REG_CON_CTRL2 5 |
| #define TPS65023_REG_DEF_CORE 6 |
| #define TPS65023_REG_DEFSLEW 7 |
| #define TPS65023_REG_LDO_CTRL 8 |
| |
| /* PGOODZ bitfields */ |
| #define TPS65023_PGOODZ_PWRFAILZ BIT(7) |
| #define TPS65023_PGOODZ_LOWBATTZ BIT(6) |
| #define TPS65023_PGOODZ_VDCDC1 BIT(5) |
| #define TPS65023_PGOODZ_VDCDC2 BIT(4) |
| #define TPS65023_PGOODZ_VDCDC3 BIT(3) |
| #define TPS65023_PGOODZ_LDO2 BIT(2) |
| #define TPS65023_PGOODZ_LDO1 BIT(1) |
| |
| /* MASK bitfields */ |
| #define TPS65023_MASK_PWRFAILZ BIT(7) |
| #define TPS65023_MASK_LOWBATTZ BIT(6) |
| #define TPS65023_MASK_VDCDC1 BIT(5) |
| #define TPS65023_MASK_VDCDC2 BIT(4) |
| #define TPS65023_MASK_VDCDC3 BIT(3) |
| #define TPS65023_MASK_LDO2 BIT(2) |
| #define TPS65023_MASK_LDO1 BIT(1) |
| |
| /* REG_CTRL bitfields */ |
| #define TPS65023_REG_CTRL_VDCDC1_EN BIT(5) |
| #define TPS65023_REG_CTRL_VDCDC2_EN BIT(4) |
| #define TPS65023_REG_CTRL_VDCDC3_EN BIT(3) |
| #define TPS65023_REG_CTRL_LDO2_EN BIT(2) |
| #define TPS65023_REG_CTRL_LDO1_EN BIT(1) |
| |
| /* REG_CTRL2 bitfields */ |
| #define TPS65023_REG_CTRL2_GO BIT(7) |
| #define TPS65023_REG_CTRL2_CORE_ADJ BIT(6) |
| #define TPS65023_REG_CTRL2_DCDC2 BIT(2) |
| #define TPS65023_REG_CTRL2_DCDC1 BIT(1) |
| #define TPS65023_REG_CTRL2_DCDC3 BIT(0) |
| |
| /* Number of step-down converters available */ |
| #define TPS65023_NUM_DCDC 3 |
| /* Number of LDO voltage regulators available */ |
| #define TPS65023_NUM_LDO 2 |
| /* Number of total regulators available */ |
| #define TPS65023_NUM_REGULATOR (TPS65023_NUM_DCDC + TPS65023_NUM_LDO) |
| |
| /* DCDCs */ |
| #define TPS65023_DCDC_1 0 |
| #define TPS65023_DCDC_2 1 |
| #define TPS65023_DCDC_3 2 |
| /* LDOs */ |
| #define TPS65023_LDO_1 3 |
| #define TPS65023_LDO_2 4 |
| |
| #define TPS65023_MAX_REG_ID TPS65023_LDO_2 |
| |
| #define TPS65023_REGULATOR_DCDC(_num, _t, _em) \ |
| { \ |
| .name = "VDCDC"#_num, \ |
| .of_match = of_match_ptr("VDCDC"#_num), \ |
| .regulators_node = of_match_ptr("regulators"), \ |
| .id = TPS65023_DCDC_##_num, \ |
| .n_voltages = ARRAY_SIZE(_t), \ |
| .ops = &tps65023_dcdc_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .owner = THIS_MODULE, \ |
| .volt_table = _t, \ |
| .vsel_reg = TPS65023_REG_DEF_CORE, \ |
| .vsel_mask = ARRAY_SIZE(_t) - 1, \ |
| .enable_mask = _em, \ |
| .enable_reg = TPS65023_REG_REG_CTRL, \ |
| .apply_reg = TPS65023_REG_CON_CTRL2, \ |
| .apply_bit = TPS65023_REG_CTRL2_GO, \ |
| } \ |
| |
| #define TPS65023_REGULATOR_LDO(_num, _t, _vm) \ |
| { \ |
| .name = "LDO"#_num, \ |
| .of_match = of_match_ptr("LDO"#_num), \ |
| .regulators_node = of_match_ptr("regulators"), \ |
| .id = TPS65023_LDO_##_num, \ |
| .n_voltages = ARRAY_SIZE(_t), \ |
| .ops = &tps65023_ldo_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .owner = THIS_MODULE, \ |
| .volt_table = _t, \ |
| .vsel_reg = TPS65023_REG_LDO_CTRL, \ |
| .vsel_mask = _vm, \ |
| .enable_mask = 1 << (_num), \ |
| .enable_reg = TPS65023_REG_REG_CTRL, \ |
| } \ |
| |
| /* Supported voltage values for regulators */ |
| static const unsigned int VCORE_VSEL_table[] = { |
| 800000, 825000, 850000, 875000, |
| 900000, 925000, 950000, 975000, |
| 1000000, 1025000, 1050000, 1075000, |
| 1100000, 1125000, 1150000, 1175000, |
| 1200000, 1225000, 1250000, 1275000, |
| 1300000, 1325000, 1350000, 1375000, |
| 1400000, 1425000, 1450000, 1475000, |
| 1500000, 1525000, 1550000, 1600000, |
| }; |
| |
| static const unsigned int DCDC_FIXED_3300000_VSEL_table[] = { |
| 3300000, |
| }; |
| |
| static const unsigned int DCDC_FIXED_1800000_VSEL_table[] = { |
| 1800000, |
| }; |
| |
| /* Supported voltage values for LDO regulators for tps65020 */ |
| static const unsigned int TPS65020_LDO_VSEL_table[] = { |
| 1000000, 1050000, 1100000, 1300000, |
| 1800000, 2500000, 3000000, 3300000, |
| }; |
| |
| /* Supported voltage values for LDO regulators |
| * for tps65021 and tps65023 */ |
| static const unsigned int TPS65023_LDO1_VSEL_table[] = { |
| 1000000, 1100000, 1300000, 1800000, |
| 2200000, 2600000, 2800000, 3150000, |
| }; |
| |
| static const unsigned int TPS65023_LDO2_VSEL_table[] = { |
| 1050000, 1200000, 1300000, 1800000, |
| 2500000, 2800000, 3000000, 3300000, |
| }; |
| |
| /* PMIC details */ |
| struct tps_pmic { |
| struct regulator_dev *rdev[TPS65023_NUM_REGULATOR]; |
| const struct tps_driver_data *driver_data; |
| struct regmap *regmap; |
| }; |
| |
| /* Struct passed as driver data */ |
| struct tps_driver_data { |
| const struct regulator_desc *desc; |
| u8 core_regulator; |
| }; |
| |
| static int tps65023_dcdc_get_voltage_sel(struct regulator_dev *dev) |
| { |
| struct tps_pmic *tps = rdev_get_drvdata(dev); |
| int dcdc = rdev_get_id(dev); |
| |
| if (dcdc < TPS65023_DCDC_1 || dcdc > TPS65023_DCDC_3) |
| return -EINVAL; |
| |
| if (dcdc != tps->driver_data->core_regulator) |
| return 0; |
| |
| return regulator_get_voltage_sel_regmap(dev); |
| } |
| |
| static int tps65023_dcdc_set_voltage_sel(struct regulator_dev *dev, |
| unsigned selector) |
| { |
| struct tps_pmic *tps = rdev_get_drvdata(dev); |
| int dcdc = rdev_get_id(dev); |
| |
| if (dcdc != tps->driver_data->core_regulator) |
| return -EINVAL; |
| |
| return regulator_set_voltage_sel_regmap(dev, selector); |
| } |
| |
| /* Operations permitted on VDCDCx */ |
| static const struct regulator_ops tps65023_dcdc_ops = { |
| .is_enabled = regulator_is_enabled_regmap, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .get_voltage_sel = tps65023_dcdc_get_voltage_sel, |
| .set_voltage_sel = tps65023_dcdc_set_voltage_sel, |
| .list_voltage = regulator_list_voltage_table, |
| .map_voltage = regulator_map_voltage_ascend, |
| }; |
| |
| /* Operations permitted on LDOx */ |
| static const struct regulator_ops tps65023_ldo_ops = { |
| .is_enabled = regulator_is_enabled_regmap, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .list_voltage = regulator_list_voltage_table, |
| .map_voltage = regulator_map_voltage_ascend, |
| }; |
| |
| static const struct regmap_config tps65023_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| }; |
| |
| static const struct regulator_desc tps65020_regulators[] = { |
| TPS65023_REGULATOR_DCDC(1, DCDC_FIXED_3300000_VSEL_table, 0x20), |
| TPS65023_REGULATOR_DCDC(2, DCDC_FIXED_1800000_VSEL_table, 0x10), |
| TPS65023_REGULATOR_DCDC(3, VCORE_VSEL_table, 0x08), |
| TPS65023_REGULATOR_LDO(1, TPS65020_LDO_VSEL_table, 0x07), |
| TPS65023_REGULATOR_LDO(2, TPS65020_LDO_VSEL_table, 0x70), |
| }; |
| |
| static const struct regulator_desc tps65021_regulators[] = { |
| TPS65023_REGULATOR_DCDC(1, DCDC_FIXED_3300000_VSEL_table, 0x20), |
| TPS65023_REGULATOR_DCDC(2, DCDC_FIXED_1800000_VSEL_table, 0x10), |
| TPS65023_REGULATOR_DCDC(3, VCORE_VSEL_table, 0x08), |
| TPS65023_REGULATOR_LDO(1, TPS65023_LDO1_VSEL_table, 0x07), |
| TPS65023_REGULATOR_LDO(2, TPS65023_LDO2_VSEL_table, 0x70), |
| }; |
| |
| static const struct regulator_desc tps65023_regulators[] = { |
| TPS65023_REGULATOR_DCDC(1, VCORE_VSEL_table, 0x20), |
| TPS65023_REGULATOR_DCDC(2, DCDC_FIXED_3300000_VSEL_table, 0x10), |
| TPS65023_REGULATOR_DCDC(3, DCDC_FIXED_1800000_VSEL_table, 0x08), |
| TPS65023_REGULATOR_LDO(1, TPS65023_LDO1_VSEL_table, 0x07), |
| TPS65023_REGULATOR_LDO(2, TPS65023_LDO2_VSEL_table, 0x70), |
| }; |
| |
| static struct tps_driver_data tps65020_drv_data = { |
| .desc = tps65020_regulators, |
| .core_regulator = TPS65023_DCDC_3, |
| }; |
| |
| static struct tps_driver_data tps65021_drv_data = { |
| .desc = tps65021_regulators, |
| .core_regulator = TPS65023_DCDC_3, |
| }; |
| |
| static struct tps_driver_data tps65023_drv_data = { |
| .desc = tps65023_regulators, |
| .core_regulator = TPS65023_DCDC_1, |
| }; |
| |
| static int tps_65023_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct regulator_init_data *init_data = dev_get_platdata(&client->dev); |
| struct regulator_config config = { }; |
| struct tps_pmic *tps; |
| int i; |
| int error; |
| |
| tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL); |
| if (!tps) |
| return -ENOMEM; |
| |
| tps->driver_data = (struct tps_driver_data *)id->driver_data; |
| |
| tps->regmap = devm_regmap_init_i2c(client, &tps65023_regmap_config); |
| if (IS_ERR(tps->regmap)) { |
| error = PTR_ERR(tps->regmap); |
| dev_err(&client->dev, "Failed to allocate register map: %d\n", |
| error); |
| return error; |
| } |
| |
| /* common for all regulators */ |
| config.dev = &client->dev; |
| config.driver_data = tps; |
| config.regmap = tps->regmap; |
| |
| for (i = 0; i < TPS65023_NUM_REGULATOR; i++) { |
| if (init_data) |
| config.init_data = &init_data[i]; |
| |
| /* Register the regulators */ |
| tps->rdev[i] = devm_regulator_register(&client->dev, |
| &tps->driver_data->desc[i], &config); |
| if (IS_ERR(tps->rdev[i])) { |
| dev_err(&client->dev, "failed to register %s\n", |
| id->name); |
| return PTR_ERR(tps->rdev[i]); |
| } |
| } |
| |
| i2c_set_clientdata(client, tps); |
| |
| /* Enable setting output voltage by I2C */ |
| regmap_update_bits(tps->regmap, TPS65023_REG_CON_CTRL2, |
| TPS65023_REG_CTRL2_CORE_ADJ, 0); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id __maybe_unused tps65023_of_match[] = { |
| { .compatible = "ti,tps65020", .data = &tps65020_drv_data}, |
| { .compatible = "ti,tps65021", .data = &tps65021_drv_data}, |
| { .compatible = "ti,tps65023", .data = &tps65023_drv_data}, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, tps65023_of_match); |
| |
| static const struct i2c_device_id tps_65023_id[] = { |
| { |
| .name = "tps65023", |
| .driver_data = (kernel_ulong_t)&tps65023_drv_data |
| }, { |
| .name = "tps65021", |
| .driver_data = (kernel_ulong_t)&tps65021_drv_data |
| }, { |
| .name = "tps65020", |
| .driver_data = (kernel_ulong_t)&tps65020_drv_data |
| }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(i2c, tps_65023_id); |
| |
| static struct i2c_driver tps_65023_i2c_driver = { |
| .driver = { |
| .name = "tps65023", |
| .of_match_table = of_match_ptr(tps65023_of_match), |
| }, |
| .probe = tps_65023_probe, |
| .id_table = tps_65023_id, |
| }; |
| |
| static int __init tps_65023_init(void) |
| { |
| return i2c_add_driver(&tps_65023_i2c_driver); |
| } |
| subsys_initcall(tps_65023_init); |
| |
| static void __exit tps_65023_cleanup(void) |
| { |
| i2c_del_driver(&tps_65023_i2c_driver); |
| } |
| module_exit(tps_65023_cleanup); |
| |
| MODULE_AUTHOR("Texas Instruments"); |
| MODULE_DESCRIPTION("TPS65023 voltage regulator driver"); |
| MODULE_LICENSE("GPL v2"); |