| /* |
| * linux/drivers/video/tgafb.c -- DEC 21030 TGA frame buffer device |
| * |
| * Copyright (C) 1995 Jay Estabrook |
| * Copyright (C) 1997 Geert Uytterhoeven |
| * Copyright (C) 1999,2000 Martin Lucina, Tom Zerucha |
| * Copyright (C) 2002 Richard Henderson |
| * Copyright (C) 2006, 2007 Maciej W. Rozycki |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file COPYING in the main directory of this archive for |
| * more details. |
| */ |
| |
| #include <linux/aperture.h> |
| #include <linux/bitrev.h> |
| #include <linux/compiler.h> |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/errno.h> |
| #include <linux/fb.h> |
| #include <linux/init.h> |
| #include <linux/ioport.h> |
| #include <linux/kernel.h> |
| #include <linux/mm.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/selection.h> |
| #include <linux/string.h> |
| #include <linux/tc.h> |
| |
| #include <asm/io.h> |
| |
| #include <video/tgafb.h> |
| |
| #ifdef CONFIG_TC |
| #define TGA_BUS_TC(dev) (dev->bus == &tc_bus_type) |
| #else |
| #define TGA_BUS_TC(dev) 0 |
| #endif |
| |
| /* |
| * Local functions. |
| */ |
| |
| static int tgafb_check_var(struct fb_var_screeninfo *, struct fb_info *); |
| static int tgafb_set_par(struct fb_info *); |
| static void tgafb_set_pll(struct tga_par *, int); |
| static int tgafb_setcolreg(unsigned, unsigned, unsigned, unsigned, |
| unsigned, struct fb_info *); |
| static int tgafb_blank(int, struct fb_info *); |
| static void tgafb_init_fix(struct fb_info *); |
| |
| static void tgafb_imageblit(struct fb_info *, const struct fb_image *); |
| static void tgafb_fillrect(struct fb_info *, const struct fb_fillrect *); |
| static void tgafb_copyarea(struct fb_info *, const struct fb_copyarea *); |
| static int tgafb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info); |
| |
| static int tgafb_register(struct device *dev); |
| static void tgafb_unregister(struct device *dev); |
| |
| static const char *mode_option; |
| static const char *mode_option_pci = "640x480@60"; |
| static const char *mode_option_tc = "1280x1024@72"; |
| |
| |
| static struct pci_driver tgafb_pci_driver; |
| static struct tc_driver tgafb_tc_driver; |
| |
| /* |
| * Frame buffer operations |
| */ |
| |
| static const struct fb_ops tgafb_ops = { |
| .owner = THIS_MODULE, |
| .fb_check_var = tgafb_check_var, |
| .fb_set_par = tgafb_set_par, |
| .fb_setcolreg = tgafb_setcolreg, |
| .fb_blank = tgafb_blank, |
| .fb_pan_display = tgafb_pan_display, |
| .fb_fillrect = tgafb_fillrect, |
| .fb_copyarea = tgafb_copyarea, |
| .fb_imageblit = tgafb_imageblit, |
| }; |
| |
| |
| #ifdef CONFIG_PCI |
| /* |
| * PCI registration operations |
| */ |
| static int tgafb_pci_register(struct pci_dev *, const struct pci_device_id *); |
| static void tgafb_pci_unregister(struct pci_dev *); |
| |
| static struct pci_device_id const tgafb_pci_table[] = { |
| { PCI_DEVICE(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TGA) }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(pci, tgafb_pci_table); |
| |
| static struct pci_driver tgafb_pci_driver = { |
| .name = "tgafb", |
| .id_table = tgafb_pci_table, |
| .probe = tgafb_pci_register, |
| .remove = tgafb_pci_unregister, |
| }; |
| |
| static int tgafb_pci_register(struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| int ret; |
| |
| ret = aperture_remove_conflicting_pci_devices(pdev, "tgafb"); |
| if (ret) |
| return ret; |
| |
| return tgafb_register(&pdev->dev); |
| } |
| |
| static void tgafb_pci_unregister(struct pci_dev *pdev) |
| { |
| tgafb_unregister(&pdev->dev); |
| } |
| #endif /* CONFIG_PCI */ |
| |
| #ifdef CONFIG_TC |
| /* |
| * TC registration operations |
| */ |
| static int tgafb_tc_register(struct device *); |
| static int tgafb_tc_unregister(struct device *); |
| |
| static struct tc_device_id const tgafb_tc_table[] = { |
| { "DEC ", "PMAGD-AA" }, |
| { "DEC ", "PMAGD " }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(tc, tgafb_tc_table); |
| |
| static struct tc_driver tgafb_tc_driver = { |
| .id_table = tgafb_tc_table, |
| .driver = { |
| .name = "tgafb", |
| .bus = &tc_bus_type, |
| .probe = tgafb_tc_register, |
| .remove = tgafb_tc_unregister, |
| }, |
| }; |
| |
| static int tgafb_tc_register(struct device *dev) |
| { |
| int status = tgafb_register(dev); |
| if (!status) |
| get_device(dev); |
| return status; |
| } |
| |
| static int tgafb_tc_unregister(struct device *dev) |
| { |
| put_device(dev); |
| tgafb_unregister(dev); |
| return 0; |
| } |
| #endif /* CONFIG_TC */ |
| |
| |
| /** |
| * tgafb_check_var - Optional function. Validates a var passed in. |
| * @var: frame buffer variable screen structure |
| * @info: frame buffer structure that represents a single frame buffer |
| */ |
| static int |
| tgafb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) |
| { |
| struct tga_par *par = (struct tga_par *)info->par; |
| |
| if (!var->pixclock) |
| return -EINVAL; |
| |
| if (par->tga_type == TGA_TYPE_8PLANE) { |
| if (var->bits_per_pixel != 8) |
| return -EINVAL; |
| } else { |
| if (var->bits_per_pixel != 32) |
| return -EINVAL; |
| } |
| var->red.length = var->green.length = var->blue.length = 8; |
| if (var->bits_per_pixel == 32) { |
| var->red.offset = 16; |
| var->green.offset = 8; |
| var->blue.offset = 0; |
| } |
| |
| if (var->xres_virtual != var->xres || var->yres_virtual != var->yres) |
| return -EINVAL; |
| if (var->xres * var->yres * (var->bits_per_pixel >> 3) > info->fix.smem_len) |
| return -EINVAL; |
| if (var->nonstd) |
| return -EINVAL; |
| if (1000000000 / var->pixclock > TGA_PLL_MAX_FREQ) |
| return -EINVAL; |
| if ((var->vmode & FB_VMODE_MASK) != FB_VMODE_NONINTERLACED) |
| return -EINVAL; |
| |
| /* Some of the acceleration routines assume the line width is |
| a multiple of 8 bytes. */ |
| if (var->xres * (par->tga_type == TGA_TYPE_8PLANE ? 1 : 4) % 8) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| /** |
| * tgafb_set_par - Optional function. Alters the hardware state. |
| * @info: frame buffer structure that represents a single frame buffer |
| */ |
| static int |
| tgafb_set_par(struct fb_info *info) |
| { |
| static unsigned int const deep_presets[4] = { |
| 0x00004000, |
| 0x0000440d, |
| 0xffffffff, |
| 0x0000441d |
| }; |
| static unsigned int const rasterop_presets[4] = { |
| 0x00000003, |
| 0x00000303, |
| 0xffffffff, |
| 0x00000303 |
| }; |
| static unsigned int const mode_presets[4] = { |
| 0x00000000, |
| 0x00000300, |
| 0xffffffff, |
| 0x00000300 |
| }; |
| static unsigned int const base_addr_presets[4] = { |
| 0x00000000, |
| 0x00000001, |
| 0xffffffff, |
| 0x00000001 |
| }; |
| |
| struct tga_par *par = (struct tga_par *) info->par; |
| int tga_bus_pci = dev_is_pci(par->dev); |
| int tga_bus_tc = TGA_BUS_TC(par->dev); |
| u32 htimings, vtimings, pll_freq; |
| u8 tga_type; |
| int i; |
| |
| /* Encode video timings. */ |
| htimings = (((info->var.xres/4) & TGA_HORIZ_ACT_LSB) |
| | (((info->var.xres/4) & 0x600 << 19) & TGA_HORIZ_ACT_MSB)); |
| vtimings = (info->var.yres & TGA_VERT_ACTIVE); |
| htimings |= ((info->var.right_margin/4) << 9) & TGA_HORIZ_FP; |
| vtimings |= (info->var.lower_margin << 11) & TGA_VERT_FP; |
| htimings |= ((info->var.hsync_len/4) << 14) & TGA_HORIZ_SYNC; |
| vtimings |= (info->var.vsync_len << 16) & TGA_VERT_SYNC; |
| htimings |= ((info->var.left_margin/4) << 21) & TGA_HORIZ_BP; |
| vtimings |= (info->var.upper_margin << 22) & TGA_VERT_BP; |
| |
| if (info->var.sync & FB_SYNC_HOR_HIGH_ACT) |
| htimings |= TGA_HORIZ_POLARITY; |
| if (info->var.sync & FB_SYNC_VERT_HIGH_ACT) |
| vtimings |= TGA_VERT_POLARITY; |
| |
| par->htimings = htimings; |
| par->vtimings = vtimings; |
| |
| par->sync_on_green = !!(info->var.sync & FB_SYNC_ON_GREEN); |
| |
| /* Store other useful values in par. */ |
| par->xres = info->var.xres; |
| par->yres = info->var.yres; |
| par->pll_freq = pll_freq = 1000000000 / info->var.pixclock; |
| par->bits_per_pixel = info->var.bits_per_pixel; |
| info->fix.line_length = par->xres * (par->bits_per_pixel >> 3); |
| |
| tga_type = par->tga_type; |
| |
| /* First, disable video. */ |
| TGA_WRITE_REG(par, TGA_VALID_VIDEO | TGA_VALID_BLANK, TGA_VALID_REG); |
| |
| /* Write the DEEP register. */ |
| while (TGA_READ_REG(par, TGA_CMD_STAT_REG) & 1) /* wait for not busy */ |
| continue; |
| mb(); |
| TGA_WRITE_REG(par, deep_presets[tga_type] | |
| (par->sync_on_green ? 0x0 : 0x00010000), |
| TGA_DEEP_REG); |
| while (TGA_READ_REG(par, TGA_CMD_STAT_REG) & 1) /* wait for not busy */ |
| continue; |
| mb(); |
| |
| /* Write some more registers. */ |
| TGA_WRITE_REG(par, rasterop_presets[tga_type], TGA_RASTEROP_REG); |
| TGA_WRITE_REG(par, mode_presets[tga_type], TGA_MODE_REG); |
| TGA_WRITE_REG(par, base_addr_presets[tga_type], TGA_BASE_ADDR_REG); |
| |
| /* Calculate & write the PLL. */ |
| tgafb_set_pll(par, pll_freq); |
| |
| /* Write some more registers. */ |
| TGA_WRITE_REG(par, 0xffffffff, TGA_PLANEMASK_REG); |
| TGA_WRITE_REG(par, 0xffffffff, TGA_PIXELMASK_REG); |
| |
| /* Init video timing regs. */ |
| TGA_WRITE_REG(par, htimings, TGA_HORIZ_REG); |
| TGA_WRITE_REG(par, vtimings, TGA_VERT_REG); |
| |
| /* Initialise RAMDAC. */ |
| if (tga_type == TGA_TYPE_8PLANE && tga_bus_pci) { |
| |
| /* Init BT485 RAMDAC registers. */ |
| BT485_WRITE(par, 0xa2 | (par->sync_on_green ? 0x8 : 0x0), |
| BT485_CMD_0); |
| BT485_WRITE(par, 0x01, BT485_ADDR_PAL_WRITE); |
| BT485_WRITE(par, 0x14, BT485_CMD_3); /* cursor 64x64 */ |
| BT485_WRITE(par, 0x40, BT485_CMD_1); |
| BT485_WRITE(par, 0x20, BT485_CMD_2); /* cursor off, for now */ |
| BT485_WRITE(par, 0xff, BT485_PIXEL_MASK); |
| |
| /* Fill palette registers. */ |
| BT485_WRITE(par, 0x00, BT485_ADDR_PAL_WRITE); |
| TGA_WRITE_REG(par, BT485_DATA_PAL, TGA_RAMDAC_SETUP_REG); |
| |
| for (i = 0; i < 256 * 3; i += 4) { |
| TGA_WRITE_REG(par, 0x55 | (BT485_DATA_PAL << 8), |
| TGA_RAMDAC_REG); |
| TGA_WRITE_REG(par, 0x00 | (BT485_DATA_PAL << 8), |
| TGA_RAMDAC_REG); |
| TGA_WRITE_REG(par, 0x00 | (BT485_DATA_PAL << 8), |
| TGA_RAMDAC_REG); |
| TGA_WRITE_REG(par, 0x00 | (BT485_DATA_PAL << 8), |
| TGA_RAMDAC_REG); |
| } |
| |
| } else if (tga_type == TGA_TYPE_8PLANE && tga_bus_tc) { |
| |
| /* Init BT459 RAMDAC registers. */ |
| BT459_WRITE(par, BT459_REG_ACC, BT459_CMD_REG_0, 0x40); |
| BT459_WRITE(par, BT459_REG_ACC, BT459_CMD_REG_1, 0x00); |
| BT459_WRITE(par, BT459_REG_ACC, BT459_CMD_REG_2, |
| (par->sync_on_green ? 0xc0 : 0x40)); |
| |
| BT459_WRITE(par, BT459_REG_ACC, BT459_CUR_CMD_REG, 0x00); |
| |
| /* Fill the palette. */ |
| BT459_LOAD_ADDR(par, 0x0000); |
| TGA_WRITE_REG(par, BT459_PALETTE << 2, TGA_RAMDAC_SETUP_REG); |
| |
| for (i = 0; i < 256 * 3; i += 4) { |
| TGA_WRITE_REG(par, 0x55, TGA_RAMDAC_REG); |
| TGA_WRITE_REG(par, 0x00, TGA_RAMDAC_REG); |
| TGA_WRITE_REG(par, 0x00, TGA_RAMDAC_REG); |
| TGA_WRITE_REG(par, 0x00, TGA_RAMDAC_REG); |
| } |
| |
| } else { /* 24-plane or 24plusZ */ |
| |
| /* Init BT463 RAMDAC registers. */ |
| BT463_WRITE(par, BT463_REG_ACC, BT463_CMD_REG_0, 0x40); |
| BT463_WRITE(par, BT463_REG_ACC, BT463_CMD_REG_1, 0x08); |
| BT463_WRITE(par, BT463_REG_ACC, BT463_CMD_REG_2, |
| (par->sync_on_green ? 0xc0 : 0x40)); |
| |
| BT463_WRITE(par, BT463_REG_ACC, BT463_READ_MASK_0, 0xff); |
| BT463_WRITE(par, BT463_REG_ACC, BT463_READ_MASK_1, 0xff); |
| BT463_WRITE(par, BT463_REG_ACC, BT463_READ_MASK_2, 0xff); |
| BT463_WRITE(par, BT463_REG_ACC, BT463_READ_MASK_3, 0x0f); |
| |
| BT463_WRITE(par, BT463_REG_ACC, BT463_BLINK_MASK_0, 0x00); |
| BT463_WRITE(par, BT463_REG_ACC, BT463_BLINK_MASK_1, 0x00); |
| BT463_WRITE(par, BT463_REG_ACC, BT463_BLINK_MASK_2, 0x00); |
| BT463_WRITE(par, BT463_REG_ACC, BT463_BLINK_MASK_3, 0x00); |
| |
| /* Fill the palette. */ |
| BT463_LOAD_ADDR(par, 0x0000); |
| TGA_WRITE_REG(par, BT463_PALETTE << 2, TGA_RAMDAC_SETUP_REG); |
| |
| #ifdef CONFIG_HW_CONSOLE |
| for (i = 0; i < 16; i++) { |
| int j = color_table[i]; |
| |
| TGA_WRITE_REG(par, default_red[j], TGA_RAMDAC_REG); |
| TGA_WRITE_REG(par, default_grn[j], TGA_RAMDAC_REG); |
| TGA_WRITE_REG(par, default_blu[j], TGA_RAMDAC_REG); |
| } |
| for (i = 0; i < 512 * 3; i += 4) { |
| #else |
| for (i = 0; i < 528 * 3; i += 4) { |
| #endif |
| TGA_WRITE_REG(par, 0x55, TGA_RAMDAC_REG); |
| TGA_WRITE_REG(par, 0x00, TGA_RAMDAC_REG); |
| TGA_WRITE_REG(par, 0x00, TGA_RAMDAC_REG); |
| TGA_WRITE_REG(par, 0x00, TGA_RAMDAC_REG); |
| } |
| |
| /* Fill window type table after start of vertical retrace. */ |
| while (!(TGA_READ_REG(par, TGA_INTR_STAT_REG) & 0x01)) |
| continue; |
| TGA_WRITE_REG(par, 0x01, TGA_INTR_STAT_REG); |
| mb(); |
| while (!(TGA_READ_REG(par, TGA_INTR_STAT_REG) & 0x01)) |
| continue; |
| TGA_WRITE_REG(par, 0x01, TGA_INTR_STAT_REG); |
| |
| BT463_LOAD_ADDR(par, BT463_WINDOW_TYPE_BASE); |
| TGA_WRITE_REG(par, BT463_REG_ACC << 2, TGA_RAMDAC_SETUP_REG); |
| |
| for (i = 0; i < 16; i++) { |
| TGA_WRITE_REG(par, 0x00, TGA_RAMDAC_REG); |
| TGA_WRITE_REG(par, 0x01, TGA_RAMDAC_REG); |
| TGA_WRITE_REG(par, 0x00, TGA_RAMDAC_REG); |
| } |
| |
| } |
| |
| /* Finally, enable video scan (and pray for the monitor... :-) */ |
| TGA_WRITE_REG(par, TGA_VALID_VIDEO, TGA_VALID_REG); |
| |
| return 0; |
| } |
| |
| #define DIFFCHECK(X) \ |
| do { \ |
| if (m <= 0x3f) { \ |
| int delta = f - (TGA_PLL_BASE_FREQ * (X)) / (r << shift); \ |
| if (delta < 0) \ |
| delta = -delta; \ |
| if (delta < min_diff) \ |
| min_diff = delta, vm = m, va = a, vr = r; \ |
| } \ |
| } while (0) |
| |
| static void |
| tgafb_set_pll(struct tga_par *par, int f) |
| { |
| int n, shift, base, min_diff, target; |
| int r,a,m,vm = 34, va = 1, vr = 30; |
| |
| for (r = 0 ; r < 12 ; r++) |
| TGA_WRITE_REG(par, !r, TGA_CLOCK_REG); |
| |
| if (f > TGA_PLL_MAX_FREQ) |
| f = TGA_PLL_MAX_FREQ; |
| |
| if (f >= TGA_PLL_MAX_FREQ / 2) |
| shift = 0; |
| else if (f >= TGA_PLL_MAX_FREQ / 4) |
| shift = 1; |
| else |
| shift = 2; |
| |
| TGA_WRITE_REG(par, shift & 1, TGA_CLOCK_REG); |
| TGA_WRITE_REG(par, shift >> 1, TGA_CLOCK_REG); |
| |
| for (r = 0 ; r < 10 ; r++) |
| TGA_WRITE_REG(par, 0, TGA_CLOCK_REG); |
| |
| if (f <= 120000) { |
| TGA_WRITE_REG(par, 0, TGA_CLOCK_REG); |
| TGA_WRITE_REG(par, 0, TGA_CLOCK_REG); |
| } |
| else if (f <= 200000) { |
| TGA_WRITE_REG(par, 1, TGA_CLOCK_REG); |
| TGA_WRITE_REG(par, 0, TGA_CLOCK_REG); |
| } |
| else { |
| TGA_WRITE_REG(par, 0, TGA_CLOCK_REG); |
| TGA_WRITE_REG(par, 1, TGA_CLOCK_REG); |
| } |
| |
| TGA_WRITE_REG(par, 1, TGA_CLOCK_REG); |
| TGA_WRITE_REG(par, 0, TGA_CLOCK_REG); |
| TGA_WRITE_REG(par, 0, TGA_CLOCK_REG); |
| TGA_WRITE_REG(par, 1, TGA_CLOCK_REG); |
| TGA_WRITE_REG(par, 0, TGA_CLOCK_REG); |
| TGA_WRITE_REG(par, 1, TGA_CLOCK_REG); |
| |
| target = (f << shift) / TGA_PLL_BASE_FREQ; |
| min_diff = TGA_PLL_MAX_FREQ; |
| |
| r = 7 / target; |
| if (!r) r = 1; |
| |
| base = target * r; |
| while (base < 449) { |
| for (n = base < 7 ? 7 : base; n < base + target && n < 449; n++) { |
| m = ((n + 3) / 7) - 1; |
| a = 0; |
| DIFFCHECK((m + 1) * 7); |
| m++; |
| DIFFCHECK((m + 1) * 7); |
| m = (n / 6) - 1; |
| if ((a = n % 6)) |
| DIFFCHECK(n); |
| } |
| r++; |
| base += target; |
| } |
| |
| vr--; |
| |
| for (r = 0; r < 8; r++) |
| TGA_WRITE_REG(par, (vm >> r) & 1, TGA_CLOCK_REG); |
| for (r = 0; r < 8 ; r++) |
| TGA_WRITE_REG(par, (va >> r) & 1, TGA_CLOCK_REG); |
| for (r = 0; r < 7 ; r++) |
| TGA_WRITE_REG(par, (vr >> r) & 1, TGA_CLOCK_REG); |
| TGA_WRITE_REG(par, ((vr >> 7) & 1)|2, TGA_CLOCK_REG); |
| } |
| |
| |
| /** |
| * tgafb_setcolreg - Optional function. Sets a color register. |
| * @regno: boolean, 0 copy local, 1 get_user() function |
| * @red: frame buffer colormap structure |
| * @green: The green value which can be up to 16 bits wide |
| * @blue: The blue value which can be up to 16 bits wide. |
| * @transp: If supported the alpha value which can be up to 16 bits wide. |
| * @info: frame buffer info structure |
| */ |
| static int |
| tgafb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, |
| unsigned transp, struct fb_info *info) |
| { |
| struct tga_par *par = (struct tga_par *) info->par; |
| int tga_bus_pci = dev_is_pci(par->dev); |
| int tga_bus_tc = TGA_BUS_TC(par->dev); |
| |
| if (regno > 255) |
| return 1; |
| red >>= 8; |
| green >>= 8; |
| blue >>= 8; |
| |
| if (par->tga_type == TGA_TYPE_8PLANE && tga_bus_pci) { |
| BT485_WRITE(par, regno, BT485_ADDR_PAL_WRITE); |
| TGA_WRITE_REG(par, BT485_DATA_PAL, TGA_RAMDAC_SETUP_REG); |
| TGA_WRITE_REG(par, red|(BT485_DATA_PAL<<8),TGA_RAMDAC_REG); |
| TGA_WRITE_REG(par, green|(BT485_DATA_PAL<<8),TGA_RAMDAC_REG); |
| TGA_WRITE_REG(par, blue|(BT485_DATA_PAL<<8),TGA_RAMDAC_REG); |
| } else if (par->tga_type == TGA_TYPE_8PLANE && tga_bus_tc) { |
| BT459_LOAD_ADDR(par, regno); |
| TGA_WRITE_REG(par, BT459_PALETTE << 2, TGA_RAMDAC_SETUP_REG); |
| TGA_WRITE_REG(par, red, TGA_RAMDAC_REG); |
| TGA_WRITE_REG(par, green, TGA_RAMDAC_REG); |
| TGA_WRITE_REG(par, blue, TGA_RAMDAC_REG); |
| } else { |
| if (regno < 16) { |
| u32 value = (regno << 16) | (regno << 8) | regno; |
| ((u32 *)info->pseudo_palette)[regno] = value; |
| } |
| BT463_LOAD_ADDR(par, regno); |
| TGA_WRITE_REG(par, BT463_PALETTE << 2, TGA_RAMDAC_SETUP_REG); |
| TGA_WRITE_REG(par, red, TGA_RAMDAC_REG); |
| TGA_WRITE_REG(par, green, TGA_RAMDAC_REG); |
| TGA_WRITE_REG(par, blue, TGA_RAMDAC_REG); |
| } |
| |
| return 0; |
| } |
| |
| |
| /** |
| * tgafb_blank - Optional function. Blanks the display. |
| * @blank: the blank mode we want. |
| * @info: frame buffer structure that represents a single frame buffer |
| */ |
| static int |
| tgafb_blank(int blank, struct fb_info *info) |
| { |
| struct tga_par *par = (struct tga_par *) info->par; |
| u32 vhcr, vvcr, vvvr; |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| |
| vhcr = TGA_READ_REG(par, TGA_HORIZ_REG); |
| vvcr = TGA_READ_REG(par, TGA_VERT_REG); |
| vvvr = TGA_READ_REG(par, TGA_VALID_REG); |
| vvvr &= ~(TGA_VALID_VIDEO | TGA_VALID_BLANK); |
| |
| switch (blank) { |
| case FB_BLANK_UNBLANK: /* Unblanking */ |
| if (par->vesa_blanked) { |
| TGA_WRITE_REG(par, vhcr & 0xbfffffff, TGA_HORIZ_REG); |
| TGA_WRITE_REG(par, vvcr & 0xbfffffff, TGA_VERT_REG); |
| par->vesa_blanked = 0; |
| } |
| TGA_WRITE_REG(par, vvvr | TGA_VALID_VIDEO, TGA_VALID_REG); |
| break; |
| |
| case FB_BLANK_NORMAL: /* Normal blanking */ |
| TGA_WRITE_REG(par, vvvr | TGA_VALID_VIDEO | TGA_VALID_BLANK, |
| TGA_VALID_REG); |
| break; |
| |
| case FB_BLANK_VSYNC_SUSPEND: /* VESA blank (vsync off) */ |
| TGA_WRITE_REG(par, vvcr | 0x40000000, TGA_VERT_REG); |
| TGA_WRITE_REG(par, vvvr | TGA_VALID_BLANK, TGA_VALID_REG); |
| par->vesa_blanked = 1; |
| break; |
| |
| case FB_BLANK_HSYNC_SUSPEND: /* VESA blank (hsync off) */ |
| TGA_WRITE_REG(par, vhcr | 0x40000000, TGA_HORIZ_REG); |
| TGA_WRITE_REG(par, vvvr | TGA_VALID_BLANK, TGA_VALID_REG); |
| par->vesa_blanked = 1; |
| break; |
| |
| case FB_BLANK_POWERDOWN: /* Poweroff */ |
| TGA_WRITE_REG(par, vhcr | 0x40000000, TGA_HORIZ_REG); |
| TGA_WRITE_REG(par, vvcr | 0x40000000, TGA_VERT_REG); |
| TGA_WRITE_REG(par, vvvr | TGA_VALID_BLANK, TGA_VALID_REG); |
| par->vesa_blanked = 1; |
| break; |
| } |
| |
| local_irq_restore(flags); |
| return 0; |
| } |
| |
| |
| /* |
| * Acceleration. |
| */ |
| |
| static void |
| tgafb_mono_imageblit(struct fb_info *info, const struct fb_image *image) |
| { |
| struct tga_par *par = (struct tga_par *) info->par; |
| u32 fgcolor, bgcolor, dx, dy, width, height, vxres, vyres, pixelmask; |
| unsigned long rincr, line_length, shift, pos, is8bpp; |
| unsigned long i, j; |
| const unsigned char *data; |
| void __iomem *regs_base; |
| void __iomem *fb_base; |
| |
| is8bpp = info->var.bits_per_pixel == 8; |
| |
| dx = image->dx; |
| dy = image->dy; |
| width = image->width; |
| height = image->height; |
| vxres = info->var.xres_virtual; |
| vyres = info->var.yres_virtual; |
| line_length = info->fix.line_length; |
| rincr = (width + 7) / 8; |
| |
| /* A shift below cannot cope with. */ |
| if (unlikely(width == 0)) |
| return; |
| /* Crop the image to the screen. */ |
| if (dx > vxres || dy > vyres) |
| return; |
| if (dx + width > vxres) |
| width = vxres - dx; |
| if (dy + height > vyres) |
| height = vyres - dy; |
| |
| regs_base = par->tga_regs_base; |
| fb_base = par->tga_fb_base; |
| |
| /* Expand the color values to fill 32-bits. */ |
| /* ??? Would be nice to notice colour changes elsewhere, so |
| that we can do this only when necessary. */ |
| fgcolor = image->fg_color; |
| bgcolor = image->bg_color; |
| if (is8bpp) { |
| fgcolor |= fgcolor << 8; |
| fgcolor |= fgcolor << 16; |
| bgcolor |= bgcolor << 8; |
| bgcolor |= bgcolor << 16; |
| } else { |
| if (fgcolor < 16) |
| fgcolor = ((u32 *)info->pseudo_palette)[fgcolor]; |
| if (bgcolor < 16) |
| bgcolor = ((u32 *)info->pseudo_palette)[bgcolor]; |
| } |
| __raw_writel(fgcolor, regs_base + TGA_FOREGROUND_REG); |
| __raw_writel(bgcolor, regs_base + TGA_BACKGROUND_REG); |
| |
| /* Acquire proper alignment; set up the PIXELMASK register |
| so that we only write the proper character cell. */ |
| pos = dy * line_length; |
| if (is8bpp) { |
| pos += dx; |
| shift = pos & 3; |
| pos &= -4; |
| } else { |
| pos += dx * 4; |
| shift = (pos & 7) >> 2; |
| pos &= -8; |
| } |
| |
| data = (const unsigned char *) image->data; |
| |
| /* Enable opaque stipple mode. */ |
| __raw_writel((is8bpp |
| ? TGA_MODE_SBM_8BPP | TGA_MODE_OPAQUE_STIPPLE |
| : TGA_MODE_SBM_24BPP | TGA_MODE_OPAQUE_STIPPLE), |
| regs_base + TGA_MODE_REG); |
| |
| if (width + shift <= 32) { |
| unsigned long bwidth; |
| |
| /* Handle common case of imaging a single character, in |
| a font less than or 32 pixels wide. */ |
| |
| /* Avoid a shift by 32; width > 0 implied. */ |
| pixelmask = (2ul << (width - 1)) - 1; |
| pixelmask <<= shift; |
| __raw_writel(pixelmask, regs_base + TGA_PIXELMASK_REG); |
| wmb(); |
| |
| bwidth = (width + 7) / 8; |
| |
| for (i = 0; i < height; ++i) { |
| u32 mask = 0; |
| |
| /* The image data is bit big endian; we need |
| little endian. */ |
| for (j = 0; j < bwidth; ++j) |
| mask |= bitrev8(data[j]) << (j * 8); |
| |
| __raw_writel(mask << shift, fb_base + pos); |
| |
| pos += line_length; |
| data += rincr; |
| } |
| wmb(); |
| __raw_writel(0xffffffff, regs_base + TGA_PIXELMASK_REG); |
| } else if (shift == 0) { |
| unsigned long pos0 = pos; |
| const unsigned char *data0 = data; |
| unsigned long bincr = (is8bpp ? 8 : 8*4); |
| unsigned long bwidth; |
| |
| /* Handle another common case in which accel_putcs |
| generates a large bitmap, which happens to be aligned. |
| Allow the tail to be misaligned. This case is |
| interesting because we've not got to hold partial |
| bytes across the words being written. */ |
| |
| wmb(); |
| |
| bwidth = (width / 8) & -4; |
| for (i = 0; i < height; ++i) { |
| for (j = 0; j < bwidth; j += 4) { |
| u32 mask = 0; |
| mask |= bitrev8(data[j+0]) << (0 * 8); |
| mask |= bitrev8(data[j+1]) << (1 * 8); |
| mask |= bitrev8(data[j+2]) << (2 * 8); |
| mask |= bitrev8(data[j+3]) << (3 * 8); |
| __raw_writel(mask, fb_base + pos + j*bincr); |
| } |
| pos += line_length; |
| data += rincr; |
| } |
| wmb(); |
| |
| pixelmask = (1ul << (width & 31)) - 1; |
| if (pixelmask) { |
| __raw_writel(pixelmask, regs_base + TGA_PIXELMASK_REG); |
| wmb(); |
| |
| pos = pos0 + bwidth*bincr; |
| data = data0 + bwidth; |
| bwidth = ((width & 31) + 7) / 8; |
| |
| for (i = 0; i < height; ++i) { |
| u32 mask = 0; |
| for (j = 0; j < bwidth; ++j) |
| mask |= bitrev8(data[j]) << (j * 8); |
| __raw_writel(mask, fb_base + pos); |
| pos += line_length; |
| data += rincr; |
| } |
| wmb(); |
| __raw_writel(0xffffffff, regs_base + TGA_PIXELMASK_REG); |
| } |
| } else { |
| unsigned long pos0 = pos; |
| const unsigned char *data0 = data; |
| unsigned long bincr = (is8bpp ? 8 : 8*4); |
| unsigned long bwidth; |
| |
| /* Finally, handle the generic case of misaligned start. |
| Here we split the write into 16-bit spans. This allows |
| us to use only one pixel mask, instead of four as would |
| be required by writing 24-bit spans. */ |
| |
| pixelmask = 0xffff << shift; |
| __raw_writel(pixelmask, regs_base + TGA_PIXELMASK_REG); |
| wmb(); |
| |
| bwidth = (width / 8) & -2; |
| for (i = 0; i < height; ++i) { |
| for (j = 0; j < bwidth; j += 2) { |
| u32 mask = 0; |
| mask |= bitrev8(data[j+0]) << (0 * 8); |
| mask |= bitrev8(data[j+1]) << (1 * 8); |
| mask <<= shift; |
| __raw_writel(mask, fb_base + pos + j*bincr); |
| } |
| pos += line_length; |
| data += rincr; |
| } |
| wmb(); |
| |
| pixelmask = ((1ul << (width & 15)) - 1) << shift; |
| if (pixelmask) { |
| __raw_writel(pixelmask, regs_base + TGA_PIXELMASK_REG); |
| wmb(); |
| |
| pos = pos0 + bwidth*bincr; |
| data = data0 + bwidth; |
| bwidth = (width & 15) > 8; |
| |
| for (i = 0; i < height; ++i) { |
| u32 mask = bitrev8(data[0]); |
| if (bwidth) |
| mask |= bitrev8(data[1]) << 8; |
| mask <<= shift; |
| __raw_writel(mask, fb_base + pos); |
| pos += line_length; |
| data += rincr; |
| } |
| wmb(); |
| } |
| __raw_writel(0xffffffff, regs_base + TGA_PIXELMASK_REG); |
| } |
| |
| /* Disable opaque stipple mode. */ |
| __raw_writel((is8bpp |
| ? TGA_MODE_SBM_8BPP | TGA_MODE_SIMPLE |
| : TGA_MODE_SBM_24BPP | TGA_MODE_SIMPLE), |
| regs_base + TGA_MODE_REG); |
| } |
| |
| static void |
| tgafb_clut_imageblit(struct fb_info *info, const struct fb_image *image) |
| { |
| struct tga_par *par = (struct tga_par *) info->par; |
| u32 color, dx, dy, width, height, vxres, vyres; |
| u32 *palette = ((u32 *)info->pseudo_palette); |
| unsigned long pos, line_length, i, j; |
| const unsigned char *data; |
| void __iomem *fb_base; |
| |
| dx = image->dx; |
| dy = image->dy; |
| width = image->width; |
| height = image->height; |
| vxres = info->var.xres_virtual; |
| vyres = info->var.yres_virtual; |
| line_length = info->fix.line_length; |
| |
| /* Crop the image to the screen. */ |
| if (dx > vxres || dy > vyres) |
| return; |
| if (dx + width > vxres) |
| width = vxres - dx; |
| if (dy + height > vyres) |
| height = vyres - dy; |
| |
| fb_base = par->tga_fb_base; |
| |
| pos = dy * line_length + (dx * 4); |
| data = image->data; |
| |
| /* Now copy the image, color_expanding via the palette. */ |
| for (i = 0; i < height; i++) { |
| for (j = 0; j < width; j++) { |
| color = palette[*data++]; |
| __raw_writel(color, fb_base + pos + j*4); |
| } |
| pos += line_length; |
| } |
| } |
| |
| /** |
| * tgafb_imageblit - REQUIRED function. Can use generic routines if |
| * non acclerated hardware and packed pixel based. |
| * Copies a image from system memory to the screen. |
| * |
| * @info: frame buffer structure that represents a single frame buffer |
| * @image: structure defining the image. |
| */ |
| static void |
| tgafb_imageblit(struct fb_info *info, const struct fb_image *image) |
| { |
| unsigned int is8bpp = info->var.bits_per_pixel == 8; |
| |
| /* If a mono image, regardless of FB depth, go do it. */ |
| if (image->depth == 1) { |
| tgafb_mono_imageblit(info, image); |
| return; |
| } |
| |
| /* For copies that aren't pixel expansion, there's little we |
| can do better than the generic code. */ |
| /* ??? There is a DMA write mode; I wonder if that could be |
| made to pull the data from the image buffer... */ |
| if (image->depth == info->var.bits_per_pixel) { |
| cfb_imageblit(info, image); |
| return; |
| } |
| |
| /* If 24-plane FB and the image is 8-plane with CLUT, we can do it. */ |
| if (!is8bpp && image->depth == 8) { |
| tgafb_clut_imageblit(info, image); |
| return; |
| } |
| |
| /* Silently return... */ |
| } |
| |
| /** |
| * tgafb_fillrect - REQUIRED function. Can use generic routines if |
| * non acclerated hardware and packed pixel based. |
| * Draws a rectangle on the screen. |
| * |
| * @info: frame buffer structure that represents a single frame buffer |
| * @rect: structure defining the rectagle and operation. |
| */ |
| static void |
| tgafb_fillrect(struct fb_info *info, const struct fb_fillrect *rect) |
| { |
| struct tga_par *par = (struct tga_par *) info->par; |
| int is8bpp = info->var.bits_per_pixel == 8; |
| u32 dx, dy, width, height, vxres, vyres, color; |
| unsigned long pos, align, line_length, i, j; |
| void __iomem *regs_base; |
| void __iomem *fb_base; |
| |
| dx = rect->dx; |
| dy = rect->dy; |
| width = rect->width; |
| height = rect->height; |
| vxres = info->var.xres_virtual; |
| vyres = info->var.yres_virtual; |
| line_length = info->fix.line_length; |
| regs_base = par->tga_regs_base; |
| fb_base = par->tga_fb_base; |
| |
| /* Crop the rectangle to the screen. */ |
| if (dx > vxres || dy > vyres || !width || !height) |
| return; |
| if (dx + width > vxres) |
| width = vxres - dx; |
| if (dy + height > vyres) |
| height = vyres - dy; |
| |
| pos = dy * line_length + dx * (is8bpp ? 1 : 4); |
| |
| /* ??? We could implement ROP_XOR with opaque fill mode |
| and a RasterOp setting of GXxor, but as far as I can |
| tell, this mode is not actually used in the kernel. |
| Thus I am ignoring it for now. */ |
| if (rect->rop != ROP_COPY) { |
| cfb_fillrect(info, rect); |
| return; |
| } |
| |
| /* Expand the color value to fill 8 pixels. */ |
| color = rect->color; |
| if (is8bpp) { |
| color |= color << 8; |
| color |= color << 16; |
| __raw_writel(color, regs_base + TGA_BLOCK_COLOR0_REG); |
| __raw_writel(color, regs_base + TGA_BLOCK_COLOR1_REG); |
| } else { |
| if (color < 16) |
| color = ((u32 *)info->pseudo_palette)[color]; |
| __raw_writel(color, regs_base + TGA_BLOCK_COLOR0_REG); |
| __raw_writel(color, regs_base + TGA_BLOCK_COLOR1_REG); |
| __raw_writel(color, regs_base + TGA_BLOCK_COLOR2_REG); |
| __raw_writel(color, regs_base + TGA_BLOCK_COLOR3_REG); |
| __raw_writel(color, regs_base + TGA_BLOCK_COLOR4_REG); |
| __raw_writel(color, regs_base + TGA_BLOCK_COLOR5_REG); |
| __raw_writel(color, regs_base + TGA_BLOCK_COLOR6_REG); |
| __raw_writel(color, regs_base + TGA_BLOCK_COLOR7_REG); |
| } |
| |
| /* The DATA register holds the fill mask for block fill mode. |
| Since we're not stippling, this is all ones. */ |
| __raw_writel(0xffffffff, regs_base + TGA_DATA_REG); |
| |
| /* Enable block fill mode. */ |
| __raw_writel((is8bpp |
| ? TGA_MODE_SBM_8BPP | TGA_MODE_BLOCK_FILL |
| : TGA_MODE_SBM_24BPP | TGA_MODE_BLOCK_FILL), |
| regs_base + TGA_MODE_REG); |
| wmb(); |
| |
| /* We can fill 2k pixels per operation. Notice blocks that fit |
| the width of the screen so that we can take advantage of this |
| and fill more than one line per write. */ |
| if (width == line_length) { |
| width *= height; |
| height = 1; |
| } |
| |
| /* The write into the frame buffer must be aligned to 4 bytes, |
| but we are allowed to encode the offset within the word in |
| the data word written. */ |
| align = (pos & 3) << 16; |
| pos &= -4; |
| |
| if (width <= 2048) { |
| u32 data; |
| |
| data = (width - 1) | align; |
| |
| for (i = 0; i < height; ++i) { |
| __raw_writel(data, fb_base + pos); |
| pos += line_length; |
| } |
| } else { |
| unsigned long Bpp = (is8bpp ? 1 : 4); |
| unsigned long nwidth = width & -2048; |
| u32 fdata, ldata; |
| |
| fdata = (2048 - 1) | align; |
| ldata = ((width & 2047) - 1) | align; |
| |
| for (i = 0; i < height; ++i) { |
| for (j = 0; j < nwidth; j += 2048) |
| __raw_writel(fdata, fb_base + pos + j*Bpp); |
| if (j < width) |
| __raw_writel(ldata, fb_base + pos + j*Bpp); |
| pos += line_length; |
| } |
| } |
| wmb(); |
| |
| /* Disable block fill mode. */ |
| __raw_writel((is8bpp |
| ? TGA_MODE_SBM_8BPP | TGA_MODE_SIMPLE |
| : TGA_MODE_SBM_24BPP | TGA_MODE_SIMPLE), |
| regs_base + TGA_MODE_REG); |
| } |
| |
| /* |
| * tgafb_copyarea - REQUIRED function. Can use generic routines if |
| * non acclerated hardware and packed pixel based. |
| * Copies on area of the screen to another area. |
| * |
| * @info: frame buffer structure that represents a single frame buffer |
| * @area: structure defining the source and destination. |
| */ |
| |
| /* Handle the special case of copying entire lines, e.g. during scrolling. |
| We can avoid a lot of needless computation in this case. In the 8bpp |
| case we need to use the COPY64 registers instead of mask writes into |
| the frame buffer to achieve maximum performance. */ |
| |
| static inline void |
| copyarea_line_8bpp(struct fb_info *info, u32 dy, u32 sy, |
| u32 height, u32 width) |
| { |
| struct tga_par *par = (struct tga_par *) info->par; |
| void __iomem *tga_regs = par->tga_regs_base; |
| unsigned long dpos, spos, i, n64; |
| |
| /* Set up the MODE and PIXELSHIFT registers. */ |
| __raw_writel(TGA_MODE_SBM_8BPP | TGA_MODE_COPY, tga_regs+TGA_MODE_REG); |
| __raw_writel(0, tga_regs+TGA_PIXELSHIFT_REG); |
| wmb(); |
| |
| n64 = (height * width) / 64; |
| |
| if (sy < dy) { |
| spos = (sy + height) * width; |
| dpos = (dy + height) * width; |
| |
| for (i = 0; i < n64; ++i) { |
| spos -= 64; |
| dpos -= 64; |
| __raw_writel(spos, tga_regs+TGA_COPY64_SRC); |
| wmb(); |
| __raw_writel(dpos, tga_regs+TGA_COPY64_DST); |
| wmb(); |
| } |
| } else { |
| spos = sy * width; |
| dpos = dy * width; |
| |
| for (i = 0; i < n64; ++i) { |
| __raw_writel(spos, tga_regs+TGA_COPY64_SRC); |
| wmb(); |
| __raw_writel(dpos, tga_regs+TGA_COPY64_DST); |
| wmb(); |
| spos += 64; |
| dpos += 64; |
| } |
| } |
| |
| /* Reset the MODE register to normal. */ |
| __raw_writel(TGA_MODE_SBM_8BPP|TGA_MODE_SIMPLE, tga_regs+TGA_MODE_REG); |
| } |
| |
| static inline void |
| copyarea_line_32bpp(struct fb_info *info, u32 dy, u32 sy, |
| u32 height, u32 width) |
| { |
| struct tga_par *par = (struct tga_par *) info->par; |
| void __iomem *tga_regs = par->tga_regs_base; |
| void __iomem *tga_fb = par->tga_fb_base; |
| void __iomem *src; |
| void __iomem *dst; |
| unsigned long i, n16; |
| |
| /* Set up the MODE and PIXELSHIFT registers. */ |
| __raw_writel(TGA_MODE_SBM_24BPP | TGA_MODE_COPY, tga_regs+TGA_MODE_REG); |
| __raw_writel(0, tga_regs+TGA_PIXELSHIFT_REG); |
| wmb(); |
| |
| n16 = (height * width) / 16; |
| |
| if (sy < dy) { |
| src = tga_fb + (sy + height) * width * 4; |
| dst = tga_fb + (dy + height) * width * 4; |
| |
| for (i = 0; i < n16; ++i) { |
| src -= 64; |
| dst -= 64; |
| __raw_writel(0xffff, src); |
| wmb(); |
| __raw_writel(0xffff, dst); |
| wmb(); |
| } |
| } else { |
| src = tga_fb + sy * width * 4; |
| dst = tga_fb + dy * width * 4; |
| |
| for (i = 0; i < n16; ++i) { |
| __raw_writel(0xffff, src); |
| wmb(); |
| __raw_writel(0xffff, dst); |
| wmb(); |
| src += 64; |
| dst += 64; |
| } |
| } |
| |
| /* Reset the MODE register to normal. */ |
| __raw_writel(TGA_MODE_SBM_24BPP|TGA_MODE_SIMPLE, tga_regs+TGA_MODE_REG); |
| } |
| |
| /* The (almost) general case of backward copy in 8bpp mode. */ |
| static inline void |
| copyarea_8bpp(struct fb_info *info, u32 dx, u32 dy, u32 sx, u32 sy, |
| u32 height, u32 width, u32 line_length, |
| const struct fb_copyarea *area) |
| { |
| struct tga_par *par = (struct tga_par *) info->par; |
| unsigned i, yincr; |
| int depos, sepos, backward, last_step, step; |
| u32 mask_last; |
| unsigned n32; |
| void __iomem *tga_regs; |
| void __iomem *tga_fb; |
| |
| /* Do acceleration only if we are aligned on 8 pixels */ |
| if ((dx | sx | width) & 7) { |
| cfb_copyarea(info, area); |
| return; |
| } |
| |
| yincr = line_length; |
| if (dy > sy) { |
| dy += height - 1; |
| sy += height - 1; |
| yincr = -yincr; |
| } |
| backward = dy == sy && dx > sx && dx < sx + width; |
| |
| /* Compute the offsets and alignments in the frame buffer. |
| More than anything else, these control how we do copies. */ |
| depos = dy * line_length + dx; |
| sepos = sy * line_length + sx; |
| if (backward) { |
| depos += width; |
| sepos += width; |
| } |
| |
| /* Next copy full words at a time. */ |
| n32 = width / 32; |
| last_step = width % 32; |
| |
| /* Finally copy the unaligned head of the span. */ |
| mask_last = (1ul << last_step) - 1; |
| |
| if (!backward) { |
| step = 32; |
| last_step = 32; |
| } else { |
| step = -32; |
| last_step = -last_step; |
| sepos -= 32; |
| depos -= 32; |
| } |
| |
| tga_regs = par->tga_regs_base; |
| tga_fb = par->tga_fb_base; |
| |
| /* Set up the MODE and PIXELSHIFT registers. */ |
| __raw_writel(TGA_MODE_SBM_8BPP|TGA_MODE_COPY, tga_regs+TGA_MODE_REG); |
| __raw_writel(0, tga_regs+TGA_PIXELSHIFT_REG); |
| wmb(); |
| |
| for (i = 0; i < height; ++i) { |
| unsigned long j; |
| void __iomem *sfb; |
| void __iomem *dfb; |
| |
| sfb = tga_fb + sepos; |
| dfb = tga_fb + depos; |
| |
| for (j = 0; j < n32; j++) { |
| if (j < 2 && j + 1 < n32 && !backward && |
| !(((unsigned long)sfb | (unsigned long)dfb) & 63)) { |
| do { |
| __raw_writel(sfb - tga_fb, tga_regs+TGA_COPY64_SRC); |
| wmb(); |
| __raw_writel(dfb - tga_fb, tga_regs+TGA_COPY64_DST); |
| wmb(); |
| sfb += 64; |
| dfb += 64; |
| j += 2; |
| } while (j + 1 < n32); |
| j--; |
| continue; |
| } |
| __raw_writel(0xffffffff, sfb); |
| wmb(); |
| __raw_writel(0xffffffff, dfb); |
| wmb(); |
| sfb += step; |
| dfb += step; |
| } |
| |
| if (mask_last) { |
| sfb += last_step - step; |
| dfb += last_step - step; |
| __raw_writel(mask_last, sfb); |
| wmb(); |
| __raw_writel(mask_last, dfb); |
| wmb(); |
| } |
| |
| sepos += yincr; |
| depos += yincr; |
| } |
| |
| /* Reset the MODE register to normal. */ |
| __raw_writel(TGA_MODE_SBM_8BPP|TGA_MODE_SIMPLE, tga_regs+TGA_MODE_REG); |
| } |
| |
| static void |
| tgafb_copyarea(struct fb_info *info, const struct fb_copyarea *area) |
| { |
| unsigned long dx, dy, width, height, sx, sy, vxres, vyres; |
| unsigned long line_length, bpp; |
| |
| dx = area->dx; |
| dy = area->dy; |
| width = area->width; |
| height = area->height; |
| sx = area->sx; |
| sy = area->sy; |
| vxres = info->var.xres_virtual; |
| vyres = info->var.yres_virtual; |
| line_length = info->fix.line_length; |
| |
| /* The top left corners must be in the virtual screen. */ |
| if (dx > vxres || sx > vxres || dy > vyres || sy > vyres) |
| return; |
| |
| /* Clip the destination. */ |
| if (dx + width > vxres) |
| width = vxres - dx; |
| if (dy + height > vyres) |
| height = vyres - dy; |
| |
| /* The source must be completely inside the virtual screen. */ |
| if (sx + width > vxres || sy + height > vyres) |
| return; |
| |
| bpp = info->var.bits_per_pixel; |
| |
| /* Detect copies of the entire line. */ |
| if (!(line_length & 63) && width * (bpp >> 3) == line_length) { |
| if (bpp == 8) |
| copyarea_line_8bpp(info, dy, sy, height, width); |
| else |
| copyarea_line_32bpp(info, dy, sy, height, width); |
| } |
| |
| /* ??? The documentation is unclear to me exactly how the pixelshift |
| register works in 32bpp mode. Since I don't have hardware to test, |
| give up for now and fall back on the generic routines. */ |
| else if (bpp == 32) |
| cfb_copyarea(info, area); |
| |
| else |
| copyarea_8bpp(info, dx, dy, sx, sy, height, |
| width, line_length, area); |
| } |
| |
| |
| /* |
| * Initialisation |
| */ |
| |
| static void |
| tgafb_init_fix(struct fb_info *info) |
| { |
| struct tga_par *par = (struct tga_par *)info->par; |
| int tga_bus_pci = dev_is_pci(par->dev); |
| int tga_bus_tc = TGA_BUS_TC(par->dev); |
| u8 tga_type = par->tga_type; |
| const char *tga_type_name = NULL; |
| unsigned memory_size; |
| |
| switch (tga_type) { |
| case TGA_TYPE_8PLANE: |
| if (tga_bus_pci) |
| tga_type_name = "Digital ZLXp-E1"; |
| if (tga_bus_tc) |
| tga_type_name = "Digital ZLX-E1"; |
| memory_size = 2097152; |
| break; |
| case TGA_TYPE_24PLANE: |
| if (tga_bus_pci) |
| tga_type_name = "Digital ZLXp-E2"; |
| if (tga_bus_tc) |
| tga_type_name = "Digital ZLX-E2"; |
| memory_size = 8388608; |
| break; |
| case TGA_TYPE_24PLUSZ: |
| if (tga_bus_pci) |
| tga_type_name = "Digital ZLXp-E3"; |
| if (tga_bus_tc) |
| tga_type_name = "Digital ZLX-E3"; |
| memory_size = 16777216; |
| break; |
| } |
| if (!tga_type_name) { |
| tga_type_name = "Unknown"; |
| memory_size = 16777216; |
| } |
| |
| strscpy(info->fix.id, tga_type_name, sizeof(info->fix.id)); |
| |
| info->fix.type = FB_TYPE_PACKED_PIXELS; |
| info->fix.type_aux = 0; |
| info->fix.visual = (tga_type == TGA_TYPE_8PLANE |
| ? FB_VISUAL_PSEUDOCOLOR |
| : FB_VISUAL_DIRECTCOLOR); |
| |
| info->fix.smem_start = (size_t) par->tga_fb_base; |
| info->fix.smem_len = memory_size; |
| info->fix.mmio_start = (size_t) par->tga_regs_base; |
| info->fix.mmio_len = 512; |
| |
| info->fix.xpanstep = 0; |
| info->fix.ypanstep = 0; |
| info->fix.ywrapstep = 0; |
| |
| info->fix.accel = FB_ACCEL_DEC_TGA; |
| |
| /* |
| * These are needed by fb_set_logo_truepalette(), so we |
| * set them here for 24-plane cards. |
| */ |
| if (tga_type != TGA_TYPE_8PLANE) { |
| info->var.red.length = 8; |
| info->var.green.length = 8; |
| info->var.blue.length = 8; |
| info->var.red.offset = 16; |
| info->var.green.offset = 8; |
| info->var.blue.offset = 0; |
| } |
| } |
| |
| static int tgafb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) |
| { |
| /* We just use this to catch switches out of graphics mode. */ |
| tgafb_set_par(info); /* A bit of overkill for BASE_ADDR reset. */ |
| return 0; |
| } |
| |
| static int tgafb_register(struct device *dev) |
| { |
| static const struct fb_videomode modedb_tc = { |
| /* 1280x1024 @ 72 Hz, 76.8 kHz hsync */ |
| "1280x1024@72", 0, 1280, 1024, 7645, 224, 28, 33, 3, 160, 3, |
| FB_SYNC_ON_GREEN, FB_VMODE_NONINTERLACED |
| }; |
| |
| static unsigned int const fb_offset_presets[4] = { |
| TGA_8PLANE_FB_OFFSET, |
| TGA_24PLANE_FB_OFFSET, |
| 0xffffffff, |
| TGA_24PLUSZ_FB_OFFSET |
| }; |
| |
| const struct fb_videomode *modedb_tga = NULL; |
| resource_size_t bar0_start = 0, bar0_len = 0; |
| const char *mode_option_tga = NULL; |
| int tga_bus_pci = dev_is_pci(dev); |
| int tga_bus_tc = TGA_BUS_TC(dev); |
| unsigned int modedbsize_tga = 0; |
| void __iomem *mem_base; |
| struct fb_info *info; |
| struct tga_par *par; |
| u8 tga_type; |
| int ret = 0; |
| |
| /* Enable device in PCI config. */ |
| if (tga_bus_pci && pci_enable_device(to_pci_dev(dev))) { |
| printk(KERN_ERR "tgafb: Cannot enable PCI device\n"); |
| return -ENODEV; |
| } |
| |
| /* Allocate the fb and par structures. */ |
| info = framebuffer_alloc(sizeof(struct tga_par), dev); |
| if (!info) |
| return -ENOMEM; |
| |
| par = info->par; |
| dev_set_drvdata(dev, info); |
| |
| /* Request the mem regions. */ |
| ret = -ENODEV; |
| if (tga_bus_pci) { |
| bar0_start = pci_resource_start(to_pci_dev(dev), 0); |
| bar0_len = pci_resource_len(to_pci_dev(dev), 0); |
| } |
| if (tga_bus_tc) { |
| bar0_start = to_tc_dev(dev)->resource.start; |
| bar0_len = to_tc_dev(dev)->resource.end - bar0_start + 1; |
| } |
| if (!request_mem_region (bar0_start, bar0_len, "tgafb")) { |
| printk(KERN_ERR "tgafb: cannot reserve FB region\n"); |
| goto err0; |
| } |
| |
| /* Map the framebuffer. */ |
| mem_base = ioremap(bar0_start, bar0_len); |
| if (!mem_base) { |
| printk(KERN_ERR "tgafb: Cannot map MMIO\n"); |
| goto err1; |
| } |
| |
| /* Grab info about the card. */ |
| tga_type = (readl(mem_base) >> 12) & 0x0f; |
| par->dev = dev; |
| par->tga_mem_base = mem_base; |
| par->tga_fb_base = mem_base + fb_offset_presets[tga_type]; |
| par->tga_regs_base = mem_base + TGA_REGS_OFFSET; |
| par->tga_type = tga_type; |
| if (tga_bus_pci) |
| par->tga_chip_rev = (to_pci_dev(dev))->revision; |
| if (tga_bus_tc) |
| par->tga_chip_rev = TGA_READ_REG(par, TGA_START_REG) & 0xff; |
| |
| /* Setup framebuffer. */ |
| info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_COPYAREA | |
| FBINFO_HWACCEL_IMAGEBLIT | FBINFO_HWACCEL_FILLRECT; |
| info->fbops = &tgafb_ops; |
| info->screen_base = par->tga_fb_base; |
| info->pseudo_palette = par->palette; |
| |
| /* This should give a reasonable default video mode. */ |
| if (tga_bus_pci) { |
| mode_option_tga = mode_option_pci; |
| } |
| if (tga_bus_tc) { |
| mode_option_tga = mode_option_tc; |
| modedb_tga = &modedb_tc; |
| modedbsize_tga = 1; |
| } |
| |
| tgafb_init_fix(info); |
| |
| ret = fb_find_mode(&info->var, info, |
| mode_option ? mode_option : mode_option_tga, |
| modedb_tga, modedbsize_tga, NULL, |
| tga_type == TGA_TYPE_8PLANE ? 8 : 32); |
| if (ret == 0 || ret == 4) { |
| printk(KERN_ERR "tgafb: Could not find valid video mode\n"); |
| ret = -EINVAL; |
| goto err1; |
| } |
| |
| if (fb_alloc_cmap(&info->cmap, 256, 0)) { |
| printk(KERN_ERR "tgafb: Could not allocate color map\n"); |
| ret = -ENOMEM; |
| goto err1; |
| } |
| |
| tgafb_set_par(info); |
| |
| if (register_framebuffer(info) < 0) { |
| printk(KERN_ERR "tgafb: Could not register framebuffer\n"); |
| ret = -EINVAL; |
| goto err2; |
| } |
| |
| if (tga_bus_pci) { |
| pr_info("tgafb: DC21030 [TGA] detected, rev=0x%02x\n", |
| par->tga_chip_rev); |
| pr_info("tgafb: at PCI bus %d, device %d, function %d\n", |
| to_pci_dev(dev)->bus->number, |
| PCI_SLOT(to_pci_dev(dev)->devfn), |
| PCI_FUNC(to_pci_dev(dev)->devfn)); |
| } |
| if (tga_bus_tc) |
| pr_info("tgafb: SFB+ detected, rev=0x%02x\n", |
| par->tga_chip_rev); |
| fb_info(info, "%s frame buffer device at 0x%lx\n", |
| info->fix.id, (long)bar0_start); |
| |
| return 0; |
| |
| err2: |
| fb_dealloc_cmap(&info->cmap); |
| err1: |
| if (mem_base) |
| iounmap(mem_base); |
| release_mem_region(bar0_start, bar0_len); |
| err0: |
| framebuffer_release(info); |
| return ret; |
| } |
| |
| static void tgafb_unregister(struct device *dev) |
| { |
| resource_size_t bar0_start = 0, bar0_len = 0; |
| int tga_bus_pci = dev_is_pci(dev); |
| int tga_bus_tc = TGA_BUS_TC(dev); |
| struct fb_info *info = NULL; |
| struct tga_par *par; |
| |
| info = dev_get_drvdata(dev); |
| if (!info) |
| return; |
| |
| par = info->par; |
| unregister_framebuffer(info); |
| fb_dealloc_cmap(&info->cmap); |
| iounmap(par->tga_mem_base); |
| if (tga_bus_pci) { |
| bar0_start = pci_resource_start(to_pci_dev(dev), 0); |
| bar0_len = pci_resource_len(to_pci_dev(dev), 0); |
| } |
| if (tga_bus_tc) { |
| bar0_start = to_tc_dev(dev)->resource.start; |
| bar0_len = to_tc_dev(dev)->resource.end - bar0_start + 1; |
| } |
| release_mem_region(bar0_start, bar0_len); |
| framebuffer_release(info); |
| } |
| |
| static void tgafb_exit(void) |
| { |
| tc_unregister_driver(&tgafb_tc_driver); |
| pci_unregister_driver(&tgafb_pci_driver); |
| } |
| |
| #ifndef MODULE |
| static int tgafb_setup(char *arg) |
| { |
| char *this_opt; |
| |
| if (arg && *arg) { |
| while ((this_opt = strsep(&arg, ","))) { |
| if (!*this_opt) |
| continue; |
| if (!strncmp(this_opt, "mode:", 5)) |
| mode_option = this_opt+5; |
| else |
| printk(KERN_ERR |
| "tgafb: unknown parameter %s\n", |
| this_opt); |
| } |
| } |
| |
| return 0; |
| } |
| #endif /* !MODULE */ |
| |
| static int tgafb_init(void) |
| { |
| int status; |
| #ifndef MODULE |
| char *option = NULL; |
| |
| if (fb_get_options("tgafb", &option)) |
| return -ENODEV; |
| tgafb_setup(option); |
| #endif |
| status = pci_register_driver(&tgafb_pci_driver); |
| if (!status) |
| status = tc_register_driver(&tgafb_tc_driver); |
| return status; |
| } |
| |
| /* |
| * Modularisation |
| */ |
| |
| module_init(tgafb_init); |
| module_exit(tgafb_exit); |
| |
| MODULE_DESCRIPTION("Framebuffer driver for TGA/SFB+ chipset"); |
| MODULE_LICENSE("GPL"); |