| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Frame buffer driver for Trident TGUI, Blade and Image series |
| * |
| * Copyright 2001, 2002 - Jani Monoses <jani@iv.ro> |
| * Copyright 2009 Krzysztof Helt <krzysztof.h1@wp.pl> |
| * |
| * CREDITS:(in order of appearance) |
| * skeletonfb.c by Geert Uytterhoeven and other fb code in drivers/video |
| * Special thanks ;) to Mattia Crivellini <tia@mclink.it> |
| * much inspired by the XFree86 4.x Trident driver sources |
| * by Alan Hourihane the FreeVGA project |
| * Francesco Salvestrini <salvestrini@users.sf.net> XP support, |
| * code, suggestions |
| * TODO: |
| * timing value tweaking so it looks good on every monitor in every mode |
| */ |
| |
| #include <linux/aperture.h> |
| #include <linux/module.h> |
| #include <linux/fb.h> |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include <linux/slab.h> |
| |
| #include <linux/delay.h> |
| #include <video/vga.h> |
| #include <video/trident.h> |
| |
| #include <linux/i2c.h> |
| #include <linux/i2c-algo-bit.h> |
| |
| struct tridentfb_par { |
| void __iomem *io_virt; /* iospace virtual memory address */ |
| u32 pseudo_pal[16]; |
| int chip_id; |
| int flatpanel; |
| void (*init_accel) (struct tridentfb_par *, int, int); |
| void (*wait_engine) (struct tridentfb_par *); |
| void (*fill_rect) |
| (struct tridentfb_par *par, u32, u32, u32, u32, u32, u32); |
| void (*copy_rect) |
| (struct tridentfb_par *par, u32, u32, u32, u32, u32, u32); |
| void (*image_blit) |
| (struct tridentfb_par *par, const char*, |
| u32, u32, u32, u32, u32, u32); |
| unsigned char eng_oper; /* engine operation... */ |
| bool ddc_registered; |
| struct i2c_adapter ddc_adapter; |
| struct i2c_algo_bit_data ddc_algo; |
| }; |
| |
| static struct fb_fix_screeninfo tridentfb_fix = { |
| .id = "Trident", |
| .type = FB_TYPE_PACKED_PIXELS, |
| .ypanstep = 1, |
| .visual = FB_VISUAL_PSEUDOCOLOR, |
| .accel = FB_ACCEL_NONE, |
| }; |
| |
| /* defaults which are normally overriden by user values */ |
| |
| /* video mode */ |
| static char *mode_option; |
| static int bpp = 8; |
| |
| static int noaccel; |
| |
| static int center; |
| static int stretch; |
| |
| static int fp; |
| static int crt; |
| |
| static int memsize; |
| static int memdiff; |
| static int nativex; |
| |
| module_param(mode_option, charp, 0); |
| MODULE_PARM_DESC(mode_option, "Initial video mode e.g. '648x480-8@60'"); |
| module_param_named(mode, mode_option, charp, 0); |
| MODULE_PARM_DESC(mode, "Initial video mode e.g. '648x480-8@60' (deprecated)"); |
| module_param(bpp, int, 0); |
| module_param(center, int, 0); |
| module_param(stretch, int, 0); |
| module_param(noaccel, int, 0); |
| module_param(memsize, int, 0); |
| module_param(memdiff, int, 0); |
| module_param(nativex, int, 0); |
| module_param(fp, int, 0); |
| MODULE_PARM_DESC(fp, "Define if flatpanel is connected"); |
| module_param(crt, int, 0); |
| MODULE_PARM_DESC(crt, "Define if CRT is connected"); |
| |
| static inline int is_oldclock(int id) |
| { |
| return (id == TGUI9440) || |
| (id == TGUI9660) || |
| (id == CYBER9320); |
| } |
| |
| static inline int is_oldprotect(int id) |
| { |
| return is_oldclock(id) || |
| (id == PROVIDIA9685) || |
| (id == CYBER9382) || |
| (id == CYBER9385); |
| } |
| |
| static inline int is_blade(int id) |
| { |
| return (id == BLADE3D) || |
| (id == CYBERBLADEE4) || |
| (id == CYBERBLADEi7) || |
| (id == CYBERBLADEi7D) || |
| (id == CYBERBLADEi1) || |
| (id == CYBERBLADEi1D) || |
| (id == CYBERBLADEAi1) || |
| (id == CYBERBLADEAi1D); |
| } |
| |
| static inline int is_xp(int id) |
| { |
| return (id == CYBERBLADEXPAi1) || |
| (id == CYBERBLADEXPm8) || |
| (id == CYBERBLADEXPm16); |
| } |
| |
| static inline int is3Dchip(int id) |
| { |
| return is_blade(id) || is_xp(id) || |
| (id == CYBER9397) || (id == CYBER9397DVD) || |
| (id == CYBER9520) || (id == CYBER9525DVD) || |
| (id == IMAGE975) || (id == IMAGE985); |
| } |
| |
| static inline int iscyber(int id) |
| { |
| switch (id) { |
| case CYBER9388: |
| case CYBER9382: |
| case CYBER9385: |
| case CYBER9397: |
| case CYBER9397DVD: |
| case CYBER9520: |
| case CYBER9525DVD: |
| case CYBERBLADEE4: |
| case CYBERBLADEi7D: |
| case CYBERBLADEi1: |
| case CYBERBLADEi1D: |
| case CYBERBLADEAi1: |
| case CYBERBLADEAi1D: |
| case CYBERBLADEXPAi1: |
| return 1; |
| |
| case CYBER9320: |
| case CYBERBLADEi7: /* VIA MPV4 integrated version */ |
| default: |
| /* case CYBERBLDAEXPm8: Strange */ |
| /* case CYBERBLDAEXPm16: Strange */ |
| return 0; |
| } |
| } |
| |
| static inline void t_outb(struct tridentfb_par *p, u8 val, u16 reg) |
| { |
| fb_writeb(val, p->io_virt + reg); |
| } |
| |
| static inline u8 t_inb(struct tridentfb_par *p, u16 reg) |
| { |
| return fb_readb(p->io_virt + reg); |
| } |
| |
| static inline void writemmr(struct tridentfb_par *par, u16 r, u32 v) |
| { |
| fb_writel(v, par->io_virt + r); |
| } |
| |
| static inline u32 readmmr(struct tridentfb_par *par, u16 r) |
| { |
| return fb_readl(par->io_virt + r); |
| } |
| |
| #define DDC_SDA_TGUI BIT(0) |
| #define DDC_SCL_TGUI BIT(1) |
| #define DDC_SCL_DRIVE_TGUI BIT(2) |
| #define DDC_SDA_DRIVE_TGUI BIT(3) |
| #define DDC_MASK_TGUI (DDC_SCL_DRIVE_TGUI | DDC_SDA_DRIVE_TGUI) |
| |
| static void tridentfb_ddc_setscl_tgui(void *data, int val) |
| { |
| struct tridentfb_par *par = data; |
| u8 reg = vga_mm_rcrt(par->io_virt, I2C) & DDC_MASK_TGUI; |
| |
| if (val) |
| reg &= ~DDC_SCL_DRIVE_TGUI; /* disable drive - don't drive hi */ |
| else |
| reg |= DDC_SCL_DRIVE_TGUI; /* drive low */ |
| |
| vga_mm_wcrt(par->io_virt, I2C, reg); |
| } |
| |
| static void tridentfb_ddc_setsda_tgui(void *data, int val) |
| { |
| struct tridentfb_par *par = data; |
| u8 reg = vga_mm_rcrt(par->io_virt, I2C) & DDC_MASK_TGUI; |
| |
| if (val) |
| reg &= ~DDC_SDA_DRIVE_TGUI; /* disable drive - don't drive hi */ |
| else |
| reg |= DDC_SDA_DRIVE_TGUI; /* drive low */ |
| |
| vga_mm_wcrt(par->io_virt, I2C, reg); |
| } |
| |
| static int tridentfb_ddc_getsda_tgui(void *data) |
| { |
| struct tridentfb_par *par = data; |
| |
| return !!(vga_mm_rcrt(par->io_virt, I2C) & DDC_SDA_TGUI); |
| } |
| |
| #define DDC_SDA_IN BIT(0) |
| #define DDC_SCL_OUT BIT(1) |
| #define DDC_SDA_OUT BIT(3) |
| #define DDC_SCL_IN BIT(6) |
| #define DDC_MASK (DDC_SCL_OUT | DDC_SDA_OUT) |
| |
| static void tridentfb_ddc_setscl(void *data, int val) |
| { |
| struct tridentfb_par *par = data; |
| unsigned char reg; |
| |
| reg = vga_mm_rcrt(par->io_virt, I2C) & DDC_MASK; |
| if (val) |
| reg |= DDC_SCL_OUT; |
| else |
| reg &= ~DDC_SCL_OUT; |
| vga_mm_wcrt(par->io_virt, I2C, reg); |
| } |
| |
| static void tridentfb_ddc_setsda(void *data, int val) |
| { |
| struct tridentfb_par *par = data; |
| unsigned char reg; |
| |
| reg = vga_mm_rcrt(par->io_virt, I2C) & DDC_MASK; |
| if (!val) |
| reg |= DDC_SDA_OUT; |
| else |
| reg &= ~DDC_SDA_OUT; |
| vga_mm_wcrt(par->io_virt, I2C, reg); |
| } |
| |
| static int tridentfb_ddc_getscl(void *data) |
| { |
| struct tridentfb_par *par = data; |
| |
| return !!(vga_mm_rcrt(par->io_virt, I2C) & DDC_SCL_IN); |
| } |
| |
| static int tridentfb_ddc_getsda(void *data) |
| { |
| struct tridentfb_par *par = data; |
| |
| return !!(vga_mm_rcrt(par->io_virt, I2C) & DDC_SDA_IN); |
| } |
| |
| static int tridentfb_setup_ddc_bus(struct fb_info *info) |
| { |
| struct tridentfb_par *par = info->par; |
| |
| strscpy(par->ddc_adapter.name, info->fix.id, |
| sizeof(par->ddc_adapter.name)); |
| par->ddc_adapter.owner = THIS_MODULE; |
| par->ddc_adapter.class = I2C_CLASS_DDC; |
| par->ddc_adapter.algo_data = &par->ddc_algo; |
| par->ddc_adapter.dev.parent = info->device; |
| if (is_oldclock(par->chip_id)) { /* not sure if this check is OK */ |
| par->ddc_algo.setsda = tridentfb_ddc_setsda_tgui; |
| par->ddc_algo.setscl = tridentfb_ddc_setscl_tgui; |
| par->ddc_algo.getsda = tridentfb_ddc_getsda_tgui; |
| /* no getscl */ |
| } else { |
| par->ddc_algo.setsda = tridentfb_ddc_setsda; |
| par->ddc_algo.setscl = tridentfb_ddc_setscl; |
| par->ddc_algo.getsda = tridentfb_ddc_getsda; |
| par->ddc_algo.getscl = tridentfb_ddc_getscl; |
| } |
| par->ddc_algo.udelay = 10; |
| par->ddc_algo.timeout = 20; |
| par->ddc_algo.data = par; |
| |
| i2c_set_adapdata(&par->ddc_adapter, par); |
| |
| return i2c_bit_add_bus(&par->ddc_adapter); |
| } |
| |
| /* |
| * Blade specific acceleration. |
| */ |
| |
| #define point(x, y) ((y) << 16 | (x)) |
| |
| static void blade_init_accel(struct tridentfb_par *par, int pitch, int bpp) |
| { |
| int v1 = (pitch >> 3) << 20; |
| int tmp = bpp == 24 ? 2 : (bpp >> 4); |
| int v2 = v1 | (tmp << 29); |
| |
| writemmr(par, 0x21C0, v2); |
| writemmr(par, 0x21C4, v2); |
| writemmr(par, 0x21B8, v2); |
| writemmr(par, 0x21BC, v2); |
| writemmr(par, 0x21D0, v1); |
| writemmr(par, 0x21D4, v1); |
| writemmr(par, 0x21C8, v1); |
| writemmr(par, 0x21CC, v1); |
| writemmr(par, 0x216C, 0); |
| } |
| |
| static void blade_wait_engine(struct tridentfb_par *par) |
| { |
| while (readmmr(par, STATUS) & 0xFA800000) |
| cpu_relax(); |
| } |
| |
| static void blade_fill_rect(struct tridentfb_par *par, |
| u32 x, u32 y, u32 w, u32 h, u32 c, u32 rop) |
| { |
| writemmr(par, COLOR, c); |
| writemmr(par, ROP, rop ? ROP_X : ROP_S); |
| writemmr(par, CMD, 0x20000000 | 1 << 19 | 1 << 4 | 2 << 2); |
| |
| writemmr(par, DST1, point(x, y)); |
| writemmr(par, DST2, point(x + w - 1, y + h - 1)); |
| } |
| |
| static void blade_image_blit(struct tridentfb_par *par, const char *data, |
| u32 x, u32 y, u32 w, u32 h, u32 c, u32 b) |
| { |
| unsigned size = ((w + 31) >> 5) * h; |
| |
| writemmr(par, COLOR, c); |
| writemmr(par, BGCOLOR, b); |
| writemmr(par, CMD, 0xa0000000 | 3 << 19); |
| |
| writemmr(par, DST1, point(x, y)); |
| writemmr(par, DST2, point(x + w - 1, y + h - 1)); |
| |
| iowrite32_rep(par->io_virt + 0x10000, data, size); |
| } |
| |
| static void blade_copy_rect(struct tridentfb_par *par, |
| u32 x1, u32 y1, u32 x2, u32 y2, u32 w, u32 h) |
| { |
| int direction = 2; |
| u32 s1 = point(x1, y1); |
| u32 s2 = point(x1 + w - 1, y1 + h - 1); |
| u32 d1 = point(x2, y2); |
| u32 d2 = point(x2 + w - 1, y2 + h - 1); |
| |
| if ((y1 > y2) || ((y1 == y2) && (x1 > x2))) |
| direction = 0; |
| |
| writemmr(par, ROP, ROP_S); |
| writemmr(par, CMD, 0xE0000000 | 1 << 19 | 1 << 4 | 1 << 2 | direction); |
| |
| writemmr(par, SRC1, direction ? s2 : s1); |
| writemmr(par, SRC2, direction ? s1 : s2); |
| writemmr(par, DST1, direction ? d2 : d1); |
| writemmr(par, DST2, direction ? d1 : d2); |
| } |
| |
| /* |
| * BladeXP specific acceleration functions |
| */ |
| |
| static void xp_init_accel(struct tridentfb_par *par, int pitch, int bpp) |
| { |
| unsigned char x = bpp == 24 ? 3 : (bpp >> 4); |
| int v1 = pitch << (bpp == 24 ? 20 : (18 + x)); |
| |
| switch (pitch << (bpp >> 3)) { |
| case 8192: |
| case 512: |
| x |= 0x00; |
| break; |
| case 1024: |
| x |= 0x04; |
| break; |
| case 2048: |
| x |= 0x08; |
| break; |
| case 4096: |
| x |= 0x0C; |
| break; |
| } |
| |
| t_outb(par, x, 0x2125); |
| |
| par->eng_oper = x | 0x40; |
| |
| writemmr(par, 0x2154, v1); |
| writemmr(par, 0x2150, v1); |
| t_outb(par, 3, 0x2126); |
| } |
| |
| static void xp_wait_engine(struct tridentfb_par *par) |
| { |
| int count = 0; |
| int timeout = 0; |
| |
| while (t_inb(par, STATUS) & 0x80) { |
| count++; |
| if (count == 10000000) { |
| /* Timeout */ |
| count = 9990000; |
| timeout++; |
| if (timeout == 8) { |
| /* Reset engine */ |
| t_outb(par, 0x00, STATUS); |
| return; |
| } |
| } |
| cpu_relax(); |
| } |
| } |
| |
| static void xp_fill_rect(struct tridentfb_par *par, |
| u32 x, u32 y, u32 w, u32 h, u32 c, u32 rop) |
| { |
| writemmr(par, 0x2127, ROP_P); |
| writemmr(par, 0x2158, c); |
| writemmr(par, DRAWFL, 0x4000); |
| writemmr(par, OLDDIM, point(h, w)); |
| writemmr(par, OLDDST, point(y, x)); |
| t_outb(par, 0x01, OLDCMD); |
| t_outb(par, par->eng_oper, 0x2125); |
| } |
| |
| static void xp_copy_rect(struct tridentfb_par *par, |
| u32 x1, u32 y1, u32 x2, u32 y2, u32 w, u32 h) |
| { |
| u32 x1_tmp, x2_tmp, y1_tmp, y2_tmp; |
| int direction = 0x0004; |
| |
| if ((x1 < x2) && (y1 == y2)) { |
| direction |= 0x0200; |
| x1_tmp = x1 + w - 1; |
| x2_tmp = x2 + w - 1; |
| } else { |
| x1_tmp = x1; |
| x2_tmp = x2; |
| } |
| |
| if (y1 < y2) { |
| direction |= 0x0100; |
| y1_tmp = y1 + h - 1; |
| y2_tmp = y2 + h - 1; |
| } else { |
| y1_tmp = y1; |
| y2_tmp = y2; |
| } |
| |
| writemmr(par, DRAWFL, direction); |
| t_outb(par, ROP_S, 0x2127); |
| writemmr(par, OLDSRC, point(y1_tmp, x1_tmp)); |
| writemmr(par, OLDDST, point(y2_tmp, x2_tmp)); |
| writemmr(par, OLDDIM, point(h, w)); |
| t_outb(par, 0x01, OLDCMD); |
| } |
| |
| /* |
| * Image specific acceleration functions |
| */ |
| static void image_init_accel(struct tridentfb_par *par, int pitch, int bpp) |
| { |
| int tmp = bpp == 24 ? 2: (bpp >> 4); |
| |
| writemmr(par, 0x2120, 0xF0000000); |
| writemmr(par, 0x2120, 0x40000000 | tmp); |
| writemmr(par, 0x2120, 0x80000000); |
| writemmr(par, 0x2144, 0x00000000); |
| writemmr(par, 0x2148, 0x00000000); |
| writemmr(par, 0x2150, 0x00000000); |
| writemmr(par, 0x2154, 0x00000000); |
| writemmr(par, 0x2120, 0x60000000 | (pitch << 16) | pitch); |
| writemmr(par, 0x216C, 0x00000000); |
| writemmr(par, 0x2170, 0x00000000); |
| writemmr(par, 0x217C, 0x00000000); |
| writemmr(par, 0x2120, 0x10000000); |
| writemmr(par, 0x2130, (2047 << 16) | 2047); |
| } |
| |
| static void image_wait_engine(struct tridentfb_par *par) |
| { |
| while (readmmr(par, 0x2164) & 0xF0000000) |
| cpu_relax(); |
| } |
| |
| static void image_fill_rect(struct tridentfb_par *par, |
| u32 x, u32 y, u32 w, u32 h, u32 c, u32 rop) |
| { |
| writemmr(par, 0x2120, 0x80000000); |
| writemmr(par, 0x2120, 0x90000000 | ROP_S); |
| |
| writemmr(par, 0x2144, c); |
| |
| writemmr(par, DST1, point(x, y)); |
| writemmr(par, DST2, point(x + w - 1, y + h - 1)); |
| |
| writemmr(par, 0x2124, 0x80000000 | 3 << 22 | 1 << 10 | 1 << 9); |
| } |
| |
| static void image_copy_rect(struct tridentfb_par *par, |
| u32 x1, u32 y1, u32 x2, u32 y2, u32 w, u32 h) |
| { |
| int direction = 0x4; |
| u32 s1 = point(x1, y1); |
| u32 s2 = point(x1 + w - 1, y1 + h - 1); |
| u32 d1 = point(x2, y2); |
| u32 d2 = point(x2 + w - 1, y2 + h - 1); |
| |
| if ((y1 > y2) || ((y1 == y2) && (x1 > x2))) |
| direction = 0; |
| |
| writemmr(par, 0x2120, 0x80000000); |
| writemmr(par, 0x2120, 0x90000000 | ROP_S); |
| |
| writemmr(par, SRC1, direction ? s2 : s1); |
| writemmr(par, SRC2, direction ? s1 : s2); |
| writemmr(par, DST1, direction ? d2 : d1); |
| writemmr(par, DST2, direction ? d1 : d2); |
| writemmr(par, 0x2124, |
| 0x80000000 | 1 << 22 | 1 << 10 | 1 << 7 | direction); |
| } |
| |
| /* |
| * TGUI 9440/96XX acceleration |
| */ |
| |
| static void tgui_init_accel(struct tridentfb_par *par, int pitch, int bpp) |
| { |
| unsigned char x = bpp == 24 ? 3 : (bpp >> 4); |
| |
| /* disable clipping */ |
| writemmr(par, 0x2148, 0); |
| writemmr(par, 0x214C, point(4095, 2047)); |
| |
| switch ((pitch * bpp) / 8) { |
| case 8192: |
| case 512: |
| x |= 0x00; |
| break; |
| case 1024: |
| x |= 0x04; |
| break; |
| case 2048: |
| x |= 0x08; |
| break; |
| case 4096: |
| x |= 0x0C; |
| break; |
| } |
| |
| fb_writew(x, par->io_virt + 0x2122); |
| } |
| |
| static void tgui_fill_rect(struct tridentfb_par *par, |
| u32 x, u32 y, u32 w, u32 h, u32 c, u32 rop) |
| { |
| t_outb(par, ROP_P, 0x2127); |
| writemmr(par, OLDCLR, c); |
| writemmr(par, DRAWFL, 0x4020); |
| writemmr(par, OLDDIM, point(w - 1, h - 1)); |
| writemmr(par, OLDDST, point(x, y)); |
| t_outb(par, 1, OLDCMD); |
| } |
| |
| static void tgui_copy_rect(struct tridentfb_par *par, |
| u32 x1, u32 y1, u32 x2, u32 y2, u32 w, u32 h) |
| { |
| int flags = 0; |
| u16 x1_tmp, x2_tmp, y1_tmp, y2_tmp; |
| |
| if ((x1 < x2) && (y1 == y2)) { |
| flags |= 0x0200; |
| x1_tmp = x1 + w - 1; |
| x2_tmp = x2 + w - 1; |
| } else { |
| x1_tmp = x1; |
| x2_tmp = x2; |
| } |
| |
| if (y1 < y2) { |
| flags |= 0x0100; |
| y1_tmp = y1 + h - 1; |
| y2_tmp = y2 + h - 1; |
| } else { |
| y1_tmp = y1; |
| y2_tmp = y2; |
| } |
| |
| writemmr(par, DRAWFL, 0x4 | flags); |
| t_outb(par, ROP_S, 0x2127); |
| writemmr(par, OLDSRC, point(x1_tmp, y1_tmp)); |
| writemmr(par, OLDDST, point(x2_tmp, y2_tmp)); |
| writemmr(par, OLDDIM, point(w - 1, h - 1)); |
| t_outb(par, 1, OLDCMD); |
| } |
| |
| /* |
| * Accel functions called by the upper layers |
| */ |
| static void tridentfb_fillrect(struct fb_info *info, |
| const struct fb_fillrect *fr) |
| { |
| struct tridentfb_par *par = info->par; |
| int col; |
| |
| if (info->flags & FBINFO_HWACCEL_DISABLED) { |
| cfb_fillrect(info, fr); |
| return; |
| } |
| if (info->var.bits_per_pixel == 8) { |
| col = fr->color; |
| col |= col << 8; |
| col |= col << 16; |
| } else |
| col = ((u32 *)(info->pseudo_palette))[fr->color]; |
| |
| par->wait_engine(par); |
| par->fill_rect(par, fr->dx, fr->dy, fr->width, |
| fr->height, col, fr->rop); |
| } |
| |
| static void tridentfb_imageblit(struct fb_info *info, |
| const struct fb_image *img) |
| { |
| struct tridentfb_par *par = info->par; |
| int col, bgcol; |
| |
| if ((info->flags & FBINFO_HWACCEL_DISABLED) || img->depth != 1) { |
| cfb_imageblit(info, img); |
| return; |
| } |
| if (info->var.bits_per_pixel == 8) { |
| col = img->fg_color; |
| col |= col << 8; |
| col |= col << 16; |
| bgcol = img->bg_color; |
| bgcol |= bgcol << 8; |
| bgcol |= bgcol << 16; |
| } else { |
| col = ((u32 *)(info->pseudo_palette))[img->fg_color]; |
| bgcol = ((u32 *)(info->pseudo_palette))[img->bg_color]; |
| } |
| |
| par->wait_engine(par); |
| if (par->image_blit) |
| par->image_blit(par, img->data, img->dx, img->dy, |
| img->width, img->height, col, bgcol); |
| else |
| cfb_imageblit(info, img); |
| } |
| |
| static void tridentfb_copyarea(struct fb_info *info, |
| const struct fb_copyarea *ca) |
| { |
| struct tridentfb_par *par = info->par; |
| |
| if (info->flags & FBINFO_HWACCEL_DISABLED) { |
| cfb_copyarea(info, ca); |
| return; |
| } |
| par->wait_engine(par); |
| par->copy_rect(par, ca->sx, ca->sy, ca->dx, ca->dy, |
| ca->width, ca->height); |
| } |
| |
| static int tridentfb_sync(struct fb_info *info) |
| { |
| struct tridentfb_par *par = info->par; |
| |
| if (!(info->flags & FBINFO_HWACCEL_DISABLED)) |
| par->wait_engine(par); |
| return 0; |
| } |
| |
| /* |
| * Hardware access functions |
| */ |
| |
| static inline unsigned char read3X4(struct tridentfb_par *par, int reg) |
| { |
| return vga_mm_rcrt(par->io_virt, reg); |
| } |
| |
| static inline void write3X4(struct tridentfb_par *par, int reg, |
| unsigned char val) |
| { |
| vga_mm_wcrt(par->io_virt, reg, val); |
| } |
| |
| static inline unsigned char read3CE(struct tridentfb_par *par, |
| unsigned char reg) |
| { |
| return vga_mm_rgfx(par->io_virt, reg); |
| } |
| |
| static inline void writeAttr(struct tridentfb_par *par, int reg, |
| unsigned char val) |
| { |
| fb_readb(par->io_virt + VGA_IS1_RC); /* flip-flop to index */ |
| vga_mm_wattr(par->io_virt, reg, val); |
| } |
| |
| static inline void write3CE(struct tridentfb_par *par, int reg, |
| unsigned char val) |
| { |
| vga_mm_wgfx(par->io_virt, reg, val); |
| } |
| |
| static void enable_mmio(struct tridentfb_par *par) |
| { |
| /* Goto New Mode */ |
| vga_io_rseq(0x0B); |
| |
| /* Unprotect registers */ |
| vga_io_wseq(NewMode1, 0x80); |
| if (!is_oldprotect(par->chip_id)) |
| vga_io_wseq(Protection, 0x92); |
| |
| /* Enable MMIO */ |
| outb(PCIReg, 0x3D4); |
| outb(inb(0x3D5) | 0x01, 0x3D5); |
| } |
| |
| static void disable_mmio(struct tridentfb_par *par) |
| { |
| /* Goto New Mode */ |
| vga_mm_rseq(par->io_virt, 0x0B); |
| |
| /* Unprotect registers */ |
| vga_mm_wseq(par->io_virt, NewMode1, 0x80); |
| if (!is_oldprotect(par->chip_id)) |
| vga_mm_wseq(par->io_virt, Protection, 0x92); |
| |
| /* Disable MMIO */ |
| t_outb(par, PCIReg, 0x3D4); |
| t_outb(par, t_inb(par, 0x3D5) & ~0x01, 0x3D5); |
| } |
| |
| static inline void crtc_unlock(struct tridentfb_par *par) |
| { |
| write3X4(par, VGA_CRTC_V_SYNC_END, |
| read3X4(par, VGA_CRTC_V_SYNC_END) & 0x7F); |
| } |
| |
| /* Return flat panel's maximum x resolution */ |
| static int get_nativex(struct tridentfb_par *par) |
| { |
| int x, y, tmp; |
| |
| if (nativex) |
| return nativex; |
| |
| tmp = (read3CE(par, VertStretch) >> 4) & 3; |
| |
| switch (tmp) { |
| case 0: |
| x = 1280; y = 1024; |
| break; |
| case 2: |
| x = 1024; y = 768; |
| break; |
| case 3: |
| x = 800; y = 600; |
| break; |
| case 1: |
| default: |
| x = 640; y = 480; |
| break; |
| } |
| |
| output("%dx%d flat panel found\n", x, y); |
| return x; |
| } |
| |
| /* Set pitch */ |
| static inline void set_lwidth(struct tridentfb_par *par, int width) |
| { |
| write3X4(par, VGA_CRTC_OFFSET, width & 0xFF); |
| /* chips older than TGUI9660 have only 1 width bit in AddColReg */ |
| /* touching the other one breaks I2C/DDC */ |
| if (par->chip_id == TGUI9440 || par->chip_id == CYBER9320) |
| write3X4(par, AddColReg, |
| (read3X4(par, AddColReg) & 0xEF) | ((width & 0x100) >> 4)); |
| else |
| write3X4(par, AddColReg, |
| (read3X4(par, AddColReg) & 0xCF) | ((width & 0x300) >> 4)); |
| } |
| |
| /* For resolutions smaller than FP resolution stretch */ |
| static void screen_stretch(struct tridentfb_par *par) |
| { |
| if (par->chip_id != CYBERBLADEXPAi1) |
| write3CE(par, BiosReg, 0); |
| else |
| write3CE(par, BiosReg, 8); |
| write3CE(par, VertStretch, (read3CE(par, VertStretch) & 0x7C) | 1); |
| write3CE(par, HorStretch, (read3CE(par, HorStretch) & 0x7C) | 1); |
| } |
| |
| /* For resolutions smaller than FP resolution center */ |
| static inline void screen_center(struct tridentfb_par *par) |
| { |
| write3CE(par, VertStretch, (read3CE(par, VertStretch) & 0x7C) | 0x80); |
| write3CE(par, HorStretch, (read3CE(par, HorStretch) & 0x7C) | 0x80); |
| } |
| |
| /* Address of first shown pixel in display memory */ |
| static void set_screen_start(struct tridentfb_par *par, int base) |
| { |
| u8 tmp; |
| write3X4(par, VGA_CRTC_START_LO, base & 0xFF); |
| write3X4(par, VGA_CRTC_START_HI, (base & 0xFF00) >> 8); |
| tmp = read3X4(par, CRTCModuleTest) & 0xDF; |
| write3X4(par, CRTCModuleTest, tmp | ((base & 0x10000) >> 11)); |
| tmp = read3X4(par, CRTHiOrd) & 0xF8; |
| write3X4(par, CRTHiOrd, tmp | ((base & 0xE0000) >> 17)); |
| } |
| |
| /* Set dotclock frequency */ |
| static void set_vclk(struct tridentfb_par *par, unsigned long freq) |
| { |
| int m, n, k; |
| unsigned long fi, d, di; |
| unsigned char best_m = 0, best_n = 0, best_k = 0; |
| unsigned char hi, lo; |
| unsigned char shift = !is_oldclock(par->chip_id) ? 2 : 1; |
| |
| d = 20000; |
| for (k = shift; k >= 0; k--) |
| for (m = 1; m < 32; m++) { |
| n = ((m + 2) << shift) - 8; |
| for (n = (n < 0 ? 0 : n); n < 122; n++) { |
| fi = ((14318l * (n + 8)) / (m + 2)) >> k; |
| di = abs(fi - freq); |
| if (di < d || (di == d && k == best_k)) { |
| d = di; |
| best_n = n; |
| best_m = m; |
| best_k = k; |
| } |
| if (fi > freq) |
| break; |
| } |
| } |
| |
| if (is_oldclock(par->chip_id)) { |
| lo = best_n | (best_m << 7); |
| hi = (best_m >> 1) | (best_k << 4); |
| } else { |
| lo = best_n; |
| hi = best_m | (best_k << 6); |
| } |
| |
| if (is3Dchip(par->chip_id)) { |
| vga_mm_wseq(par->io_virt, ClockHigh, hi); |
| vga_mm_wseq(par->io_virt, ClockLow, lo); |
| } else { |
| t_outb(par, lo, 0x43C8); |
| t_outb(par, hi, 0x43C9); |
| } |
| debug("VCLK = %X %X\n", hi, lo); |
| } |
| |
| /* Set number of lines for flat panels*/ |
| static void set_number_of_lines(struct tridentfb_par *par, int lines) |
| { |
| int tmp = read3CE(par, CyberEnhance) & 0x8F; |
| if (lines > 1024) |
| tmp |= 0x50; |
| else if (lines > 768) |
| tmp |= 0x30; |
| else if (lines > 600) |
| tmp |= 0x20; |
| else if (lines > 480) |
| tmp |= 0x10; |
| write3CE(par, CyberEnhance, tmp); |
| } |
| |
| /* |
| * If we see that FP is active we assume we have one. |
| * Otherwise we have a CRT display. User can override. |
| */ |
| static int is_flatpanel(struct tridentfb_par *par) |
| { |
| if (fp) |
| return 1; |
| if (crt || !iscyber(par->chip_id)) |
| return 0; |
| return (read3CE(par, FPConfig) & 0x10) ? 1 : 0; |
| } |
| |
| /* Try detecting the video memory size */ |
| static unsigned int get_memsize(struct tridentfb_par *par) |
| { |
| unsigned char tmp, tmp2; |
| unsigned int k; |
| |
| /* If memory size provided by user */ |
| if (memsize) |
| k = memsize * Kb; |
| else |
| switch (par->chip_id) { |
| case CYBER9525DVD: |
| k = 2560 * Kb; |
| break; |
| default: |
| tmp = read3X4(par, SPR) & 0x0F; |
| switch (tmp) { |
| |
| case 0x01: |
| k = 512 * Kb; |
| break; |
| case 0x02: |
| k = 6 * Mb; /* XP */ |
| break; |
| case 0x03: |
| k = 1 * Mb; |
| break; |
| case 0x04: |
| k = 8 * Mb; |
| break; |
| case 0x06: |
| k = 10 * Mb; /* XP */ |
| break; |
| case 0x07: |
| k = 2 * Mb; |
| break; |
| case 0x08: |
| k = 12 * Mb; /* XP */ |
| break; |
| case 0x0A: |
| k = 14 * Mb; /* XP */ |
| break; |
| case 0x0C: |
| k = 16 * Mb; /* XP */ |
| break; |
| case 0x0E: /* XP */ |
| |
| tmp2 = vga_mm_rseq(par->io_virt, 0xC1); |
| switch (tmp2) { |
| case 0x00: |
| k = 20 * Mb; |
| break; |
| case 0x01: |
| k = 24 * Mb; |
| break; |
| case 0x10: |
| k = 28 * Mb; |
| break; |
| case 0x11: |
| k = 32 * Mb; |
| break; |
| default: |
| k = 1 * Mb; |
| break; |
| } |
| break; |
| |
| case 0x0F: |
| k = 4 * Mb; |
| break; |
| default: |
| k = 1 * Mb; |
| break; |
| } |
| } |
| |
| k -= memdiff * Kb; |
| output("framebuffer size = %d Kb\n", k / Kb); |
| return k; |
| } |
| |
| /* See if we can handle the video mode described in var */ |
| static int tridentfb_check_var(struct fb_var_screeninfo *var, |
| struct fb_info *info) |
| { |
| struct tridentfb_par *par = info->par; |
| int bpp = var->bits_per_pixel; |
| int line_length; |
| int ramdac = 230000; /* 230MHz for most 3D chips */ |
| debug("enter\n"); |
| |
| if (!var->pixclock) |
| return -EINVAL; |
| |
| /* check color depth */ |
| if (bpp == 24) |
| bpp = var->bits_per_pixel = 32; |
| if (bpp != 8 && bpp != 16 && bpp != 32) |
| return -EINVAL; |
| if (par->chip_id == TGUI9440 && bpp == 32) |
| return -EINVAL; |
| /* check whether resolution fits on panel and in memory */ |
| if (par->flatpanel && nativex && var->xres > nativex) |
| return -EINVAL; |
| /* various resolution checks */ |
| var->xres = (var->xres + 7) & ~0x7; |
| if (var->xres > var->xres_virtual) |
| var->xres_virtual = var->xres; |
| if (var->yres > var->yres_virtual) |
| var->yres_virtual = var->yres; |
| if (var->xres_virtual > 4095 || var->yres > 2048) |
| return -EINVAL; |
| /* prevent from position overflow for acceleration */ |
| if (var->yres_virtual > 0xffff) |
| return -EINVAL; |
| line_length = var->xres_virtual * bpp / 8; |
| |
| if (!is3Dchip(par->chip_id) && |
| !(info->flags & FBINFO_HWACCEL_DISABLED)) { |
| /* acceleration requires line length to be power of 2 */ |
| if (line_length <= 512) |
| var->xres_virtual = 512 * 8 / bpp; |
| else if (line_length <= 1024) |
| var->xres_virtual = 1024 * 8 / bpp; |
| else if (line_length <= 2048) |
| var->xres_virtual = 2048 * 8 / bpp; |
| else if (line_length <= 4096) |
| var->xres_virtual = 4096 * 8 / bpp; |
| else if (line_length <= 8192) |
| var->xres_virtual = 8192 * 8 / bpp; |
| else |
| return -EINVAL; |
| |
| line_length = var->xres_virtual * bpp / 8; |
| } |
| |
| /* datasheet specifies how to set panning only up to 4 MB */ |
| if (line_length * (var->yres_virtual - var->yres) > (4 << 20)) |
| var->yres_virtual = ((4 << 20) / line_length) + var->yres; |
| |
| if (line_length * var->yres_virtual > info->fix.smem_len) |
| return -EINVAL; |
| |
| switch (bpp) { |
| case 8: |
| var->red.offset = 0; |
| var->red.length = 8; |
| var->green = var->red; |
| var->blue = var->red; |
| break; |
| case 16: |
| var->red.offset = 11; |
| var->green.offset = 5; |
| var->blue.offset = 0; |
| var->red.length = 5; |
| var->green.length = 6; |
| var->blue.length = 5; |
| break; |
| case 32: |
| var->red.offset = 16; |
| var->green.offset = 8; |
| var->blue.offset = 0; |
| var->red.length = 8; |
| var->green.length = 8; |
| var->blue.length = 8; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (is_xp(par->chip_id)) |
| ramdac = 350000; |
| |
| switch (par->chip_id) { |
| case TGUI9440: |
| ramdac = (bpp >= 16) ? 45000 : 90000; |
| break; |
| case CYBER9320: |
| case TGUI9660: |
| ramdac = 135000; |
| break; |
| case PROVIDIA9685: |
| case CYBER9388: |
| case CYBER9382: |
| case CYBER9385: |
| ramdac = 170000; |
| break; |
| } |
| |
| /* The clock is doubled for 32 bpp */ |
| if (bpp == 32) |
| ramdac /= 2; |
| |
| if (PICOS2KHZ(var->pixclock) > ramdac) |
| return -EINVAL; |
| |
| debug("exit\n"); |
| |
| return 0; |
| |
| } |
| |
| /* Pan the display */ |
| static int tridentfb_pan_display(struct fb_var_screeninfo *var, |
| struct fb_info *info) |
| { |
| struct tridentfb_par *par = info->par; |
| unsigned int offset; |
| |
| debug("enter\n"); |
| offset = (var->xoffset + (var->yoffset * info->var.xres_virtual)) |
| * info->var.bits_per_pixel / 32; |
| set_screen_start(par, offset); |
| debug("exit\n"); |
| return 0; |
| } |
| |
| static inline void shadowmode_on(struct tridentfb_par *par) |
| { |
| write3CE(par, CyberControl, read3CE(par, CyberControl) | 0x81); |
| } |
| |
| /* Set the hardware to the requested video mode */ |
| static int tridentfb_set_par(struct fb_info *info) |
| { |
| struct tridentfb_par *par = info->par; |
| u32 htotal, hdispend, hsyncstart, hsyncend, hblankstart, hblankend; |
| u32 vtotal, vdispend, vsyncstart, vsyncend, vblankstart, vblankend; |
| struct fb_var_screeninfo *var = &info->var; |
| int bpp = var->bits_per_pixel; |
| unsigned char tmp; |
| unsigned long vclk; |
| |
| debug("enter\n"); |
| hdispend = var->xres / 8 - 1; |
| hsyncstart = (var->xres + var->right_margin) / 8; |
| hsyncend = (var->xres + var->right_margin + var->hsync_len) / 8; |
| htotal = (var->xres + var->left_margin + var->right_margin + |
| var->hsync_len) / 8 - 5; |
| hblankstart = hdispend + 1; |
| hblankend = htotal + 3; |
| |
| vdispend = var->yres - 1; |
| vsyncstart = var->yres + var->lower_margin; |
| vsyncend = vsyncstart + var->vsync_len; |
| vtotal = var->upper_margin + vsyncend - 2; |
| vblankstart = vdispend + 1; |
| vblankend = vtotal; |
| |
| if (info->var.vmode & FB_VMODE_INTERLACED) { |
| vtotal /= 2; |
| vdispend /= 2; |
| vsyncstart /= 2; |
| vsyncend /= 2; |
| vblankstart /= 2; |
| vblankend /= 2; |
| } |
| |
| enable_mmio(par); |
| crtc_unlock(par); |
| write3CE(par, CyberControl, 8); |
| tmp = 0xEB; |
| if (var->sync & FB_SYNC_HOR_HIGH_ACT) |
| tmp &= ~0x40; |
| if (var->sync & FB_SYNC_VERT_HIGH_ACT) |
| tmp &= ~0x80; |
| |
| if (par->flatpanel && var->xres < nativex) { |
| /* |
| * on flat panels with native size larger |
| * than requested resolution decide whether |
| * we stretch or center |
| */ |
| t_outb(par, tmp | 0xC0, VGA_MIS_W); |
| |
| shadowmode_on(par); |
| |
| if (center) |
| screen_center(par); |
| else if (stretch) |
| screen_stretch(par); |
| |
| } else { |
| t_outb(par, tmp, VGA_MIS_W); |
| write3CE(par, CyberControl, 8); |
| } |
| |
| /* vertical timing values */ |
| write3X4(par, VGA_CRTC_V_TOTAL, vtotal & 0xFF); |
| write3X4(par, VGA_CRTC_V_DISP_END, vdispend & 0xFF); |
| write3X4(par, VGA_CRTC_V_SYNC_START, vsyncstart & 0xFF); |
| write3X4(par, VGA_CRTC_V_SYNC_END, (vsyncend & 0x0F)); |
| write3X4(par, VGA_CRTC_V_BLANK_START, vblankstart & 0xFF); |
| write3X4(par, VGA_CRTC_V_BLANK_END, vblankend & 0xFF); |
| |
| /* horizontal timing values */ |
| write3X4(par, VGA_CRTC_H_TOTAL, htotal & 0xFF); |
| write3X4(par, VGA_CRTC_H_DISP, hdispend & 0xFF); |
| write3X4(par, VGA_CRTC_H_SYNC_START, hsyncstart & 0xFF); |
| write3X4(par, VGA_CRTC_H_SYNC_END, |
| (hsyncend & 0x1F) | ((hblankend & 0x20) << 2)); |
| write3X4(par, VGA_CRTC_H_BLANK_START, hblankstart & 0xFF); |
| write3X4(par, VGA_CRTC_H_BLANK_END, hblankend & 0x1F); |
| |
| /* higher bits of vertical timing values */ |
| tmp = 0x10; |
| if (vtotal & 0x100) tmp |= 0x01; |
| if (vdispend & 0x100) tmp |= 0x02; |
| if (vsyncstart & 0x100) tmp |= 0x04; |
| if (vblankstart & 0x100) tmp |= 0x08; |
| |
| if (vtotal & 0x200) tmp |= 0x20; |
| if (vdispend & 0x200) tmp |= 0x40; |
| if (vsyncstart & 0x200) tmp |= 0x80; |
| write3X4(par, VGA_CRTC_OVERFLOW, tmp); |
| |
| tmp = read3X4(par, CRTHiOrd) & 0x07; |
| tmp |= 0x08; /* line compare bit 10 */ |
| if (vtotal & 0x400) tmp |= 0x80; |
| if (vblankstart & 0x400) tmp |= 0x40; |
| if (vsyncstart & 0x400) tmp |= 0x20; |
| if (vdispend & 0x400) tmp |= 0x10; |
| write3X4(par, CRTHiOrd, tmp); |
| |
| tmp = (htotal >> 8) & 0x01; |
| tmp |= (hdispend >> 7) & 0x02; |
| tmp |= (hsyncstart >> 5) & 0x08; |
| tmp |= (hblankstart >> 4) & 0x10; |
| write3X4(par, HorizOverflow, tmp); |
| |
| tmp = 0x40; |
| if (vblankstart & 0x200) tmp |= 0x20; |
| //FIXME if (info->var.vmode & FB_VMODE_DOUBLE) tmp |= 0x80; /* double scan for 200 line modes */ |
| write3X4(par, VGA_CRTC_MAX_SCAN, tmp); |
| |
| write3X4(par, VGA_CRTC_LINE_COMPARE, 0xFF); |
| write3X4(par, VGA_CRTC_PRESET_ROW, 0); |
| write3X4(par, VGA_CRTC_MODE, 0xC3); |
| |
| write3X4(par, LinearAddReg, 0x20); /* enable linear addressing */ |
| |
| tmp = (info->var.vmode & FB_VMODE_INTERLACED) ? 0x84 : 0x80; |
| /* enable access extended memory */ |
| write3X4(par, CRTCModuleTest, tmp); |
| tmp = read3CE(par, MiscIntContReg) & ~0x4; |
| if (info->var.vmode & FB_VMODE_INTERLACED) |
| tmp |= 0x4; |
| write3CE(par, MiscIntContReg, tmp); |
| |
| /* enable GE for text acceleration */ |
| write3X4(par, GraphEngReg, 0x80); |
| |
| switch (bpp) { |
| case 8: |
| tmp = 0x00; |
| break; |
| case 16: |
| tmp = 0x05; |
| break; |
| case 24: |
| tmp = 0x29; |
| break; |
| case 32: |
| tmp = 0x09; |
| break; |
| } |
| |
| write3X4(par, PixelBusReg, tmp); |
| |
| tmp = read3X4(par, DRAMControl); |
| if (!is_oldprotect(par->chip_id)) |
| tmp |= 0x10; |
| if (iscyber(par->chip_id)) |
| tmp |= 0x20; |
| write3X4(par, DRAMControl, tmp); /* both IO, linear enable */ |
| |
| write3X4(par, InterfaceSel, read3X4(par, InterfaceSel) | 0x40); |
| if (!is_xp(par->chip_id)) |
| write3X4(par, Performance, read3X4(par, Performance) | 0x10); |
| /* MMIO & PCI read and write burst enable */ |
| if (par->chip_id != TGUI9440 && par->chip_id != IMAGE975) |
| write3X4(par, PCIReg, read3X4(par, PCIReg) | 0x06); |
| |
| vga_mm_wseq(par->io_virt, 0, 3); |
| vga_mm_wseq(par->io_virt, 1, 1); /* set char clock 8 dots wide */ |
| /* enable 4 maps because needed in chain4 mode */ |
| vga_mm_wseq(par->io_virt, 2, 0x0F); |
| vga_mm_wseq(par->io_virt, 3, 0); |
| vga_mm_wseq(par->io_virt, 4, 0x0E); /* memory mode enable bitmaps ?? */ |
| |
| /* convert from picoseconds to kHz */ |
| vclk = PICOS2KHZ(info->var.pixclock); |
| |
| /* divide clock by 2 if 32bpp chain4 mode display and CPU path */ |
| tmp = read3CE(par, MiscExtFunc) & 0xF0; |
| if (bpp == 32 || (par->chip_id == TGUI9440 && bpp == 16)) { |
| tmp |= 8; |
| vclk *= 2; |
| } |
| set_vclk(par, vclk); |
| write3CE(par, MiscExtFunc, tmp | 0x12); |
| write3CE(par, 0x5, 0x40); /* no CGA compat, allow 256 col */ |
| write3CE(par, 0x6, 0x05); /* graphics mode */ |
| write3CE(par, 0x7, 0x0F); /* planes? */ |
| |
| /* graphics mode and support 256 color modes */ |
| writeAttr(par, 0x10, 0x41); |
| writeAttr(par, 0x12, 0x0F); /* planes */ |
| writeAttr(par, 0x13, 0); /* horizontal pel panning */ |
| |
| /* colors */ |
| for (tmp = 0; tmp < 0x10; tmp++) |
| writeAttr(par, tmp, tmp); |
| fb_readb(par->io_virt + VGA_IS1_RC); /* flip-flop to index */ |
| t_outb(par, 0x20, VGA_ATT_W); /* enable attr */ |
| |
| switch (bpp) { |
| case 8: |
| tmp = 0; |
| break; |
| case 16: |
| tmp = 0x30; |
| break; |
| case 24: |
| case 32: |
| tmp = 0xD0; |
| break; |
| } |
| |
| t_inb(par, VGA_PEL_IW); |
| t_inb(par, VGA_PEL_MSK); |
| t_inb(par, VGA_PEL_MSK); |
| t_inb(par, VGA_PEL_MSK); |
| t_inb(par, VGA_PEL_MSK); |
| t_outb(par, tmp, VGA_PEL_MSK); |
| t_inb(par, VGA_PEL_IW); |
| |
| if (par->flatpanel) |
| set_number_of_lines(par, info->var.yres); |
| info->fix.line_length = info->var.xres_virtual * bpp / 8; |
| set_lwidth(par, info->fix.line_length / 8); |
| |
| if (!(info->flags & FBINFO_HWACCEL_DISABLED)) |
| par->init_accel(par, info->var.xres_virtual, bpp); |
| |
| info->fix.visual = (bpp == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR; |
| info->cmap.len = (bpp == 8) ? 256 : 16; |
| debug("exit\n"); |
| return 0; |
| } |
| |
| /* Set one color register */ |
| static int tridentfb_setcolreg(unsigned regno, unsigned red, unsigned green, |
| unsigned blue, unsigned transp, |
| struct fb_info *info) |
| { |
| int bpp = info->var.bits_per_pixel; |
| struct tridentfb_par *par = info->par; |
| |
| if (regno >= info->cmap.len) |
| return 1; |
| |
| if (bpp == 8) { |
| t_outb(par, 0xFF, VGA_PEL_MSK); |
| t_outb(par, regno, VGA_PEL_IW); |
| |
| t_outb(par, red >> 10, VGA_PEL_D); |
| t_outb(par, green >> 10, VGA_PEL_D); |
| t_outb(par, blue >> 10, VGA_PEL_D); |
| |
| } else if (regno < 16) { |
| if (bpp == 16) { /* RGB 565 */ |
| u32 col; |
| |
| col = (red & 0xF800) | ((green & 0xFC00) >> 5) | |
| ((blue & 0xF800) >> 11); |
| col |= col << 16; |
| ((u32 *)(info->pseudo_palette))[regno] = col; |
| } else if (bpp == 32) /* ARGB 8888 */ |
| ((u32 *)info->pseudo_palette)[regno] = |
| ((transp & 0xFF00) << 16) | |
| ((red & 0xFF00) << 8) | |
| ((green & 0xFF00)) | |
| ((blue & 0xFF00) >> 8); |
| } |
| |
| return 0; |
| } |
| |
| /* Try blanking the screen. For flat panels it does nothing */ |
| static int tridentfb_blank(int blank_mode, struct fb_info *info) |
| { |
| unsigned char PMCont, DPMSCont; |
| struct tridentfb_par *par = info->par; |
| |
| debug("enter\n"); |
| if (par->flatpanel) |
| return 0; |
| t_outb(par, 0x04, 0x83C8); /* Read DPMS Control */ |
| PMCont = t_inb(par, 0x83C6) & 0xFC; |
| DPMSCont = read3CE(par, PowerStatus) & 0xFC; |
| switch (blank_mode) { |
| case FB_BLANK_UNBLANK: |
| /* Screen: On, HSync: On, VSync: On */ |
| case FB_BLANK_NORMAL: |
| /* Screen: Off, HSync: On, VSync: On */ |
| PMCont |= 0x03; |
| DPMSCont |= 0x00; |
| break; |
| case FB_BLANK_HSYNC_SUSPEND: |
| /* Screen: Off, HSync: Off, VSync: On */ |
| PMCont |= 0x02; |
| DPMSCont |= 0x01; |
| break; |
| case FB_BLANK_VSYNC_SUSPEND: |
| /* Screen: Off, HSync: On, VSync: Off */ |
| PMCont |= 0x02; |
| DPMSCont |= 0x02; |
| break; |
| case FB_BLANK_POWERDOWN: |
| /* Screen: Off, HSync: Off, VSync: Off */ |
| PMCont |= 0x00; |
| DPMSCont |= 0x03; |
| break; |
| } |
| |
| write3CE(par, PowerStatus, DPMSCont); |
| t_outb(par, 4, 0x83C8); |
| t_outb(par, PMCont, 0x83C6); |
| |
| debug("exit\n"); |
| |
| /* let fbcon do a softblank for us */ |
| return (blank_mode == FB_BLANK_NORMAL) ? 1 : 0; |
| } |
| |
| static const struct fb_ops tridentfb_ops = { |
| .owner = THIS_MODULE, |
| .fb_setcolreg = tridentfb_setcolreg, |
| .fb_pan_display = tridentfb_pan_display, |
| .fb_blank = tridentfb_blank, |
| .fb_check_var = tridentfb_check_var, |
| .fb_set_par = tridentfb_set_par, |
| .fb_fillrect = tridentfb_fillrect, |
| .fb_copyarea = tridentfb_copyarea, |
| .fb_imageblit = tridentfb_imageblit, |
| .fb_sync = tridentfb_sync, |
| }; |
| |
| static int trident_pci_probe(struct pci_dev *dev, |
| const struct pci_device_id *id) |
| { |
| int err; |
| unsigned char revision; |
| struct fb_info *info; |
| struct tridentfb_par *default_par; |
| int chip3D; |
| int chip_id; |
| bool found = false; |
| |
| err = aperture_remove_conflicting_pci_devices(dev, "tridentfb"); |
| if (err) |
| return err; |
| |
| err = pcim_enable_device(dev); |
| if (err) |
| return err; |
| |
| info = framebuffer_alloc(sizeof(struct tridentfb_par), &dev->dev); |
| if (!info) |
| return -ENOMEM; |
| default_par = info->par; |
| |
| chip_id = id->device; |
| |
| /* If PCI id is 0x9660 then further detect chip type */ |
| |
| if (chip_id == TGUI9660) { |
| revision = vga_io_rseq(RevisionID); |
| |
| switch (revision) { |
| case 0x21: |
| chip_id = PROVIDIA9685; |
| break; |
| case 0x22: |
| case 0x23: |
| chip_id = CYBER9397; |
| break; |
| case 0x2A: |
| chip_id = CYBER9397DVD; |
| break; |
| case 0x30: |
| case 0x33: |
| case 0x34: |
| case 0x35: |
| case 0x38: |
| case 0x3A: |
| case 0xB3: |
| chip_id = CYBER9385; |
| break; |
| case 0x40 ... 0x43: |
| chip_id = CYBER9382; |
| break; |
| case 0x4A: |
| chip_id = CYBER9388; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| chip3D = is3Dchip(chip_id); |
| |
| if (is_xp(chip_id)) { |
| default_par->init_accel = xp_init_accel; |
| default_par->wait_engine = xp_wait_engine; |
| default_par->fill_rect = xp_fill_rect; |
| default_par->copy_rect = xp_copy_rect; |
| tridentfb_fix.accel = FB_ACCEL_TRIDENT_BLADEXP; |
| } else if (is_blade(chip_id)) { |
| default_par->init_accel = blade_init_accel; |
| default_par->wait_engine = blade_wait_engine; |
| default_par->fill_rect = blade_fill_rect; |
| default_par->copy_rect = blade_copy_rect; |
| default_par->image_blit = blade_image_blit; |
| tridentfb_fix.accel = FB_ACCEL_TRIDENT_BLADE3D; |
| } else if (chip3D) { /* 3DImage family left */ |
| default_par->init_accel = image_init_accel; |
| default_par->wait_engine = image_wait_engine; |
| default_par->fill_rect = image_fill_rect; |
| default_par->copy_rect = image_copy_rect; |
| tridentfb_fix.accel = FB_ACCEL_TRIDENT_3DIMAGE; |
| } else { /* TGUI 9440/96XX family */ |
| default_par->init_accel = tgui_init_accel; |
| default_par->wait_engine = xp_wait_engine; |
| default_par->fill_rect = tgui_fill_rect; |
| default_par->copy_rect = tgui_copy_rect; |
| tridentfb_fix.accel = FB_ACCEL_TRIDENT_TGUI; |
| } |
| |
| default_par->chip_id = chip_id; |
| |
| /* setup MMIO region */ |
| tridentfb_fix.mmio_start = pci_resource_start(dev, 1); |
| tridentfb_fix.mmio_len = pci_resource_len(dev, 1); |
| |
| if (!request_mem_region(tridentfb_fix.mmio_start, |
| tridentfb_fix.mmio_len, "tridentfb")) { |
| debug("request_region failed!\n"); |
| framebuffer_release(info); |
| return -1; |
| } |
| |
| default_par->io_virt = ioremap(tridentfb_fix.mmio_start, |
| tridentfb_fix.mmio_len); |
| |
| if (!default_par->io_virt) { |
| debug("ioremap failed\n"); |
| err = -1; |
| goto out_unmap1; |
| } |
| |
| enable_mmio(default_par); |
| |
| /* setup framebuffer memory */ |
| tridentfb_fix.smem_start = pci_resource_start(dev, 0); |
| tridentfb_fix.smem_len = get_memsize(default_par); |
| |
| if (!request_mem_region(tridentfb_fix.smem_start, |
| tridentfb_fix.smem_len, "tridentfb")) { |
| debug("request_mem_region failed!\n"); |
| disable_mmio(info->par); |
| err = -1; |
| goto out_unmap1; |
| } |
| |
| info->screen_base = ioremap(tridentfb_fix.smem_start, |
| tridentfb_fix.smem_len); |
| |
| if (!info->screen_base) { |
| debug("ioremap failed\n"); |
| err = -1; |
| goto out_unmap2; |
| } |
| |
| default_par->flatpanel = is_flatpanel(default_par); |
| |
| if (default_par->flatpanel) |
| nativex = get_nativex(default_par); |
| |
| info->fix = tridentfb_fix; |
| info->fbops = &tridentfb_ops; |
| info->pseudo_palette = default_par->pseudo_pal; |
| |
| info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN; |
| if (!noaccel && default_par->init_accel) { |
| info->flags &= ~FBINFO_HWACCEL_DISABLED; |
| info->flags |= FBINFO_HWACCEL_COPYAREA; |
| info->flags |= FBINFO_HWACCEL_FILLRECT; |
| } else |
| info->flags |= FBINFO_HWACCEL_DISABLED; |
| |
| if (is_blade(chip_id) && chip_id != BLADE3D) |
| info->flags |= FBINFO_READS_FAST; |
| |
| info->pixmap.addr = kmalloc(4096, GFP_KERNEL); |
| if (!info->pixmap.addr) { |
| err = -ENOMEM; |
| goto out_unmap2; |
| } |
| |
| info->pixmap.size = 4096; |
| info->pixmap.buf_align = 4; |
| info->pixmap.scan_align = 1; |
| info->pixmap.access_align = 32; |
| info->pixmap.flags = FB_PIXMAP_SYSTEM; |
| info->var.bits_per_pixel = 8; |
| |
| if (default_par->image_blit) { |
| info->flags |= FBINFO_HWACCEL_IMAGEBLIT; |
| info->pixmap.scan_align = 4; |
| } |
| |
| if (noaccel) { |
| printk(KERN_DEBUG "disabling acceleration\n"); |
| info->flags |= FBINFO_HWACCEL_DISABLED; |
| info->pixmap.scan_align = 1; |
| } |
| |
| if (tridentfb_setup_ddc_bus(info) == 0) { |
| u8 *edid = fb_ddc_read(&default_par->ddc_adapter); |
| |
| default_par->ddc_registered = true; |
| if (edid) { |
| fb_edid_to_monspecs(edid, &info->monspecs); |
| kfree(edid); |
| if (!info->monspecs.modedb) |
| dev_err(info->device, "error getting mode database\n"); |
| else { |
| const struct fb_videomode *m; |
| |
| fb_videomode_to_modelist(info->monspecs.modedb, |
| info->monspecs.modedb_len, |
| &info->modelist); |
| m = fb_find_best_display(&info->monspecs, |
| &info->modelist); |
| if (m) { |
| fb_videomode_to_var(&info->var, m); |
| /* fill all other info->var's fields */ |
| if (tridentfb_check_var(&info->var, |
| info) == 0) |
| found = true; |
| } |
| } |
| } |
| } |
| |
| if (!mode_option && !found) |
| mode_option = "640x480-8@60"; |
| |
| /* Prepare startup mode */ |
| if (mode_option) { |
| err = fb_find_mode(&info->var, info, mode_option, |
| info->monspecs.modedb, |
| info->monspecs.modedb_len, |
| NULL, info->var.bits_per_pixel); |
| if (!err || err == 4) { |
| err = -EINVAL; |
| dev_err(info->device, "mode %s not found\n", |
| mode_option); |
| fb_destroy_modedb(info->monspecs.modedb); |
| info->monspecs.modedb = NULL; |
| goto out_unmap2; |
| } |
| } |
| |
| fb_destroy_modedb(info->monspecs.modedb); |
| info->monspecs.modedb = NULL; |
| |
| err = fb_alloc_cmap(&info->cmap, 256, 0); |
| if (err < 0) |
| goto out_unmap2; |
| |
| info->var.activate |= FB_ACTIVATE_NOW; |
| info->device = &dev->dev; |
| if (register_framebuffer(info) < 0) { |
| printk(KERN_ERR "tridentfb: could not register framebuffer\n"); |
| fb_dealloc_cmap(&info->cmap); |
| err = -EINVAL; |
| goto out_unmap2; |
| } |
| output("fb%d: %s frame buffer device %dx%d-%dbpp\n", |
| info->node, info->fix.id, info->var.xres, |
| info->var.yres, info->var.bits_per_pixel); |
| |
| pci_set_drvdata(dev, info); |
| return 0; |
| |
| out_unmap2: |
| if (default_par->ddc_registered) |
| i2c_del_adapter(&default_par->ddc_adapter); |
| kfree(info->pixmap.addr); |
| if (info->screen_base) |
| iounmap(info->screen_base); |
| disable_mmio(info->par); |
| out_unmap1: |
| if (default_par->io_virt) |
| iounmap(default_par->io_virt); |
| framebuffer_release(info); |
| return err; |
| } |
| |
| static void trident_pci_remove(struct pci_dev *dev) |
| { |
| struct fb_info *info = pci_get_drvdata(dev); |
| struct tridentfb_par *par = info->par; |
| |
| unregister_framebuffer(info); |
| if (par->ddc_registered) |
| i2c_del_adapter(&par->ddc_adapter); |
| iounmap(par->io_virt); |
| iounmap(info->screen_base); |
| kfree(info->pixmap.addr); |
| fb_dealloc_cmap(&info->cmap); |
| framebuffer_release(info); |
| } |
| |
| /* List of boards that we are trying to support */ |
| static const struct pci_device_id trident_devices[] = { |
| {PCI_VENDOR_ID_TRIDENT, BLADE3D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, |
| {PCI_VENDOR_ID_TRIDENT, CYBERBLADEi7, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, |
| {PCI_VENDOR_ID_TRIDENT, CYBERBLADEi7D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, |
| {PCI_VENDOR_ID_TRIDENT, CYBERBLADEi1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, |
| {PCI_VENDOR_ID_TRIDENT, CYBERBLADEi1D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, |
| {PCI_VENDOR_ID_TRIDENT, CYBERBLADEAi1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, |
| {PCI_VENDOR_ID_TRIDENT, CYBERBLADEAi1D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, |
| {PCI_VENDOR_ID_TRIDENT, CYBERBLADEE4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, |
| {PCI_VENDOR_ID_TRIDENT, TGUI9440, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, |
| {PCI_VENDOR_ID_TRIDENT, TGUI9660, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, |
| {PCI_VENDOR_ID_TRIDENT, IMAGE975, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, |
| {PCI_VENDOR_ID_TRIDENT, IMAGE985, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, |
| {PCI_VENDOR_ID_TRIDENT, CYBER9320, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, |
| {PCI_VENDOR_ID_TRIDENT, CYBER9388, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, |
| {PCI_VENDOR_ID_TRIDENT, CYBER9520, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, |
| {PCI_VENDOR_ID_TRIDENT, CYBER9525DVD, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, |
| {PCI_VENDOR_ID_TRIDENT, CYBER9397, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, |
| {PCI_VENDOR_ID_TRIDENT, CYBER9397DVD, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, |
| {PCI_VENDOR_ID_TRIDENT, CYBERBLADEXPAi1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, |
| {PCI_VENDOR_ID_TRIDENT, CYBERBLADEXPm8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, |
| {PCI_VENDOR_ID_TRIDENT, CYBERBLADEXPm16, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, |
| {0,} |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, trident_devices); |
| |
| static struct pci_driver tridentfb_pci_driver = { |
| .name = "tridentfb", |
| .id_table = trident_devices, |
| .probe = trident_pci_probe, |
| .remove = trident_pci_remove, |
| }; |
| |
| /* |
| * Parse user specified options (`video=trident:') |
| * example: |
| * video=trident:800x600,bpp=16,noaccel |
| */ |
| #ifndef MODULE |
| static int __init tridentfb_setup(char *options) |
| { |
| char *opt; |
| if (!options || !*options) |
| return 0; |
| while ((opt = strsep(&options, ",")) != NULL) { |
| if (!*opt) |
| continue; |
| if (!strncmp(opt, "noaccel", 7)) |
| noaccel = 1; |
| else if (!strncmp(opt, "fp", 2)) |
| fp = 1; |
| else if (!strncmp(opt, "crt", 3)) |
| fp = 0; |
| else if (!strncmp(opt, "bpp=", 4)) |
| bpp = simple_strtoul(opt + 4, NULL, 0); |
| else if (!strncmp(opt, "center", 6)) |
| center = 1; |
| else if (!strncmp(opt, "stretch", 7)) |
| stretch = 1; |
| else if (!strncmp(opt, "memsize=", 8)) |
| memsize = simple_strtoul(opt + 8, NULL, 0); |
| else if (!strncmp(opt, "memdiff=", 8)) |
| memdiff = simple_strtoul(opt + 8, NULL, 0); |
| else if (!strncmp(opt, "nativex=", 8)) |
| nativex = simple_strtoul(opt + 8, NULL, 0); |
| else |
| mode_option = opt; |
| } |
| return 0; |
| } |
| #endif |
| |
| static int __init tridentfb_init(void) |
| { |
| #ifndef MODULE |
| char *option = NULL; |
| |
| if (fb_get_options("tridentfb", &option)) |
| return -ENODEV; |
| tridentfb_setup(option); |
| #endif |
| return pci_register_driver(&tridentfb_pci_driver); |
| } |
| |
| static void __exit tridentfb_exit(void) |
| { |
| pci_unregister_driver(&tridentfb_pci_driver); |
| } |
| |
| module_init(tridentfb_init); |
| module_exit(tridentfb_exit); |
| |
| MODULE_AUTHOR("Jani Monoses <jani@iv.ro>"); |
| MODULE_DESCRIPTION("Framebuffer driver for Trident cards"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("cyblafb"); |
| |