docs: usb: convert documents to ReST
Convert USB documents to ReST, in order to prepare for adding it
to the kernel API book, as most of the stuff there are driver or
subsystem-related.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/Documentation/usb/usbip_protocol.txt b/Documentation/usb/usbip_protocol.txt
index c7a0f4c..988c832 100644
--- a/Documentation/usb/usbip_protocol.txt
+++ b/Documentation/usb/usbip_protocol.txt
@@ -1,3 +1,7 @@
+===============
+USB/IP protocol
+===============
+
PRELIMINARY DRAFT, MAY CONTAIN MISTAKES!
28 Jun 2011
@@ -12,6 +16,8 @@
the OP_REP_DEVLIST packet which lists the exported USB devices. Finally the
TCP/IP connection is closed.
+::
+
virtual host controller usb host
"client" "server"
(imports USB devices) (exports USB devices)
@@ -32,6 +38,8 @@
USBIP_CMD_UNLINK to unlink a previously submitted URB. The answers of the
server may be USBIP_RET_SUBMIT and USBIP_RET_UNLINK respectively.
+::
+
virtual host controller usb host
"client" "server"
(imports USB devices) (exports USB devices)
@@ -88,270 +96,316 @@
byte (MSB) is stored at the lowest address.
-OP_REQ_DEVLIST: Retrieve the list of exported USB devices.
+OP_REQ_DEVLIST:
+ Retrieve the list of exported USB devices.
- Offset | Length | Value | Description
------------+--------+------------+---------------------------------------------------
- 0 | 2 | 0x0100 | Binary-coded decimal USBIP version number: v1.0.0
------------+--------+------------+---------------------------------------------------
- 2 | 2 | 0x8005 | Command code: Retrieve the list of exported USB
- | | | devices.
------------+--------+------------+---------------------------------------------------
- 4 | 4 | 0x00000000 | Status: unused, shall be set to 0
++-----------+--------+------------+---------------------------------------------------+
+| Offset | Length | Value | Description |
++===========+========+============+===================================================+
+| 0 | 2 | 0x0100 | Binary-coded decimal USBIP version number: v1.0.0 |
++-----------+--------+------------+---------------------------------------------------+
+| 2 | 2 | 0x8005 | Command code: Retrieve the list of exported USB |
+| | | | devices. |
++-----------+--------+------------+---------------------------------------------------+
+| 4 | 4 | 0x00000000 | Status: unused, shall be set to 0 |
++-----------+--------+------------+---------------------------------------------------+
-OP_REP_DEVLIST: Reply with the list of exported USB devices.
+OP_REP_DEVLIST:
+ Reply with the list of exported USB devices.
- Offset | Length | Value | Description
------------+--------+------------+---------------------------------------------------
- 0 | 2 | 0x0100 | Binary-coded decimal USBIP version number: v1.0.0.
------------+--------+------------+---------------------------------------------------
- 2 | 2 | 0x0005 | Reply code: The list of exported USB devices.
------------+--------+------------+---------------------------------------------------
- 4 | 4 | 0x00000000 | Status: 0 for OK
------------+--------+------------+---------------------------------------------------
- 8 | 4 | n | Number of exported devices: 0 means no exported
- | | | devices.
------------+--------+------------+---------------------------------------------------
- 0x0C | | | From now on the exported n devices are described,
- | | | if any. If no devices are exported the message
- | | | ends with the previous "number of exported
- | | | devices" field.
------------+--------+------------+---------------------------------------------------
- | 256 | | path: Path of the device on the host exporting the
- | | | USB device, string closed with zero byte, e.g.
- | | | "/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2"
- | | | The unused bytes shall be filled with zero
- | | | bytes.
------------+--------+------------+---------------------------------------------------
- 0x10C | 32 | | busid: Bus ID of the exported device, string
- | | | closed with zero byte, e.g. "3-2". The unused
- | | | bytes shall be filled with zero bytes.
------------+--------+------------+---------------------------------------------------
- 0x12C | 4 | | busnum
------------+--------+------------+---------------------------------------------------
- 0x130 | 4 | | devnum
------------+--------+------------+---------------------------------------------------
- 0x134 | 4 | | speed
------------+--------+------------+---------------------------------------------------
- 0x138 | 2 | | idVendor
------------+--------+------------+---------------------------------------------------
- 0x13A | 2 | | idProduct
------------+--------+------------+---------------------------------------------------
- 0x13C | 2 | | bcdDevice
------------+--------+------------+---------------------------------------------------
- 0x13E | 1 | | bDeviceClass
------------+--------+------------+---------------------------------------------------
- 0x13F | 1 | | bDeviceSubClass
------------+--------+------------+---------------------------------------------------
- 0x140 | 1 | | bDeviceProtocol
------------+--------+------------+---------------------------------------------------
- 0x141 | 1 | | bConfigurationValue
------------+--------+------------+---------------------------------------------------
- 0x142 | 1 | | bNumConfigurations
------------+--------+------------+---------------------------------------------------
- 0x143 | 1 | | bNumInterfaces
------------+--------+------------+---------------------------------------------------
- 0x144 | | m_0 | From now on each interface is described, all
- | | | together bNumInterfaces times, with the
- | | | the following 4 fields:
------------+--------+------------+---------------------------------------------------
- | 1 | | bInterfaceClass
------------+--------+------------+---------------------------------------------------
- 0x145 | 1 | | bInterfaceSubClass
------------+--------+------------+---------------------------------------------------
- 0x146 | 1 | | bInterfaceProtocol
------------+--------+------------+---------------------------------------------------
- 0x147 | 1 | | padding byte for alignment, shall be set to zero
------------+--------+------------+---------------------------------------------------
- 0xC + | | | The second exported USB device starts at i=1
- i*0x138 + | | | with the busid field.
- m_(i-1)*4 | | |
++-----------+--------+------------+---------------------------------------------------+
+| Offset | Length | Value | Description |
++===========+========+============+===================================================+
+| 0 | 2 | 0x0100 | Binary-coded decimal USBIP version number: v1.0.0.|
++-----------+--------+------------+---------------------------------------------------+
+| 2 | 2 | 0x0005 | Reply code: The list of exported USB devices. |
++-----------+--------+------------+---------------------------------------------------+
+| 4 | 4 | 0x00000000 | Status: 0 for OK |
++-----------+--------+------------+---------------------------------------------------+
+| 8 | 4 | n | Number of exported devices: 0 means no exported |
+| | | | devices. |
++-----------+--------+------------+---------------------------------------------------+
+| 0x0C | | | From now on the exported n devices are described, |
+| | | | if any. If no devices are exported the message |
+| | | | ends with the previous "number of exported |
+| | | | devices" field. |
++-----------+--------+------------+---------------------------------------------------+
+| | 256 | | path: Path of the device on the host exporting the|
+| | | | USB device, string closed with zero byte, e.g. |
+| | | | "/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2" |
+| | | | The unused bytes shall be filled with zero |
+| | | | bytes. |
++-----------+--------+------------+---------------------------------------------------+
+| 0x10C | 32 | | busid: Bus ID of the exported device, string |
+| | | | closed with zero byte, e.g. "3-2". The unused |
+| | | | bytes shall be filled with zero bytes. |
++-----------+--------+------------+---------------------------------------------------+
+| 0x12C | 4 | | busnum |
++-----------+--------+------------+---------------------------------------------------+
+| 0x130 | 4 | | devnum |
++-----------+--------+------------+---------------------------------------------------+
+| 0x134 | 4 | | speed |
++-----------+--------+------------+---------------------------------------------------+
+| 0x138 | 2 | | idVendor |
++-----------+--------+------------+---------------------------------------------------+
+| 0x13A | 2 | | idProduct |
++-----------+--------+------------+---------------------------------------------------+
+| 0x13C | 2 | | bcdDevice |
++-----------+--------+------------+---------------------------------------------------+
+| 0x13E | 1 | | bDeviceClass |
++-----------+--------+------------+---------------------------------------------------+
+| 0x13F | 1 | | bDeviceSubClass |
++-----------+--------+------------+---------------------------------------------------+
+| 0x140 | 1 | | bDeviceProtocol |
++-----------+--------+------------+---------------------------------------------------+
+| 0x141 | 1 | | bConfigurationValue |
++-----------+--------+------------+---------------------------------------------------+
+| 0x142 | 1 | | bNumConfigurations |
++-----------+--------+------------+---------------------------------------------------+
+| 0x143 | 1 | | bNumInterfaces |
++-----------+--------+------------+---------------------------------------------------+
+| 0x144 | | m_0 | From now on each interface is described, all |
+| | | | together bNumInterfaces times, with the |
+| | | | the following 4 fields: |
++-----------+--------+------------+---------------------------------------------------+
+| | 1 | | bInterfaceClass |
++-----------+--------+------------+---------------------------------------------------+
+| 0x145 | 1 | | bInterfaceSubClass |
++-----------+--------+------------+---------------------------------------------------+
+| 0x146 | 1 | | bInterfaceProtocol |
++-----------+--------+------------+---------------------------------------------------+
+| 0x147 | 1 | | padding byte for alignment, shall be set to zero |
++-----------+--------+------------+---------------------------------------------------+
+| 0xC + | | | The second exported USB device starts at i=1 |
+| i*0x138 + | | | with the busid field. |
+| m_(i-1)*4 | | | |
++-----------+--------+------------+---------------------------------------------------+
-OP_REQ_IMPORT: Request to import (attach) a remote USB device.
+OP_REQ_IMPORT:
+ Request to import (attach) a remote USB device.
- Offset | Length | Value | Description
------------+--------+------------+---------------------------------------------------
- 0 | 2 | 0x0100 | Binary-coded decimal USBIP version number: v1.0.0
------------+--------+------------+---------------------------------------------------
- 2 | 2 | 0x8003 | Command code: import a remote USB device.
------------+--------+------------+---------------------------------------------------
- 4 | 4 | 0x00000000 | Status: unused, shall be set to 0
------------+--------+------------+---------------------------------------------------
- 8 | 32 | | busid: the busid of the exported device on the
- | | | remote host. The possible values are taken
- | | | from the message field OP_REP_DEVLIST.busid.
- | | | A string closed with zero, the unused bytes
- | | | shall be filled with zeros.
------------+--------+------------+---------------------------------------------------
++-----------+--------+------------+---------------------------------------------------+
+| Offset | Length | Value | Description |
++===========+========+============+===================================================+
+| 0 | 2 | 0x0100 | Binary-coded decimal USBIP version number: v1.0.0 |
++-----------+--------+------------+---------------------------------------------------+
+| 2 | 2 | 0x8003 | Command code: import a remote USB device. |
++-----------+--------+------------+---------------------------------------------------+
+| 4 | 4 | 0x00000000 | Status: unused, shall be set to 0 |
++-----------+--------+------------+---------------------------------------------------+
+| 8 | 32 | | busid: the busid of the exported device on the |
+| | | | remote host. The possible values are taken |
+| | | | from the message field OP_REP_DEVLIST.busid. |
+| | | | A string closed with zero, the unused bytes |
+| | | | shall be filled with zeros. |
++-----------+--------+------------+---------------------------------------------------+
-OP_REP_IMPORT: Reply to import (attach) a remote USB device.
+OP_REP_IMPORT:
+ Reply to import (attach) a remote USB device.
- Offset | Length | Value | Description
------------+--------+------------+---------------------------------------------------
- 0 | 2 | 0x0100 | Binary-coded decimal USBIP version number: v1.0.0
------------+--------+------------+---------------------------------------------------
- 2 | 2 | 0x0003 | Reply code: Reply to import.
------------+--------+------------+---------------------------------------------------
- 4 | 4 | 0x00000000 | Status: 0 for OK
- | | | 1 for error
------------+--------+------------+---------------------------------------------------
- 8 | | | From now on comes the details of the imported
- | | | device, if the previous status field was OK (0),
- | | | otherwise the reply ends with the status field.
------------+--------+------------+---------------------------------------------------
- | 256 | | path: Path of the device on the host exporting the
- | | | USB device, string closed with zero byte, e.g.
- | | | "/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2"
- | | | The unused bytes shall be filled with zero
- | | | bytes.
------------+--------+------------+---------------------------------------------------
- 0x108 | 32 | | busid: Bus ID of the exported device, string
- | | | closed with zero byte, e.g. "3-2". The unused
- | | | bytes shall be filled with zero bytes.
------------+--------+------------+---------------------------------------------------
- 0x128 | 4 | | busnum
------------+--------+------------+---------------------------------------------------
- 0x12C | 4 | | devnum
------------+--------+------------+---------------------------------------------------
- 0x130 | 4 | | speed
------------+--------+------------+---------------------------------------------------
- 0x134 | 2 | | idVendor
------------+--------+------------+---------------------------------------------------
- 0x136 | 2 | | idProduct
------------+--------+------------+---------------------------------------------------
- 0x138 | 2 | | bcdDevice
------------+--------+------------+---------------------------------------------------
- 0x139 | 1 | | bDeviceClass
------------+--------+------------+---------------------------------------------------
- 0x13A | 1 | | bDeviceSubClass
------------+--------+------------+---------------------------------------------------
- 0x13B | 1 | | bDeviceProtocol
------------+--------+------------+---------------------------------------------------
- 0x13C | 1 | | bConfigurationValue
------------+--------+------------+---------------------------------------------------
- 0x13D | 1 | | bNumConfigurations
------------+--------+------------+---------------------------------------------------
- 0x13E | 1 | | bNumInterfaces
++-----------+--------+------------+---------------------------------------------------+
+| Offset | Length | Value | Description |
++===========+========+============+===================================================+
+| 0 | 2 | 0x0100 | Binary-coded decimal USBIP version number: v1.0.0 |
++-----------+--------+------------+---------------------------------------------------+
+| 2 | 2 | 0x0003 | Reply code: Reply to import. |
++-----------+--------+------------+---------------------------------------------------+
+| 4 | 4 | 0x00000000 | Status: |
+| | | | |
+| | | | - 0 for OK |
+| | | | - 1 for error |
++-----------+--------+------------+---------------------------------------------------+
+| 8 | | | From now on comes the details of the imported |
+| | | | device, if the previous status field was OK (0), |
+| | | | otherwise the reply ends with the status field. |
++-----------+--------+------------+---------------------------------------------------+
+| | 256 | | path: Path of the device on the host exporting the|
+| | | | USB device, string closed with zero byte, e.g. |
+| | | | "/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2" |
+| | | | The unused bytes shall be filled with zero |
+| | | | bytes. |
++-----------+--------+------------+---------------------------------------------------+
+| 0x108 | 32 | | busid: Bus ID of the exported device, string |
+| | | | closed with zero byte, e.g. "3-2". The unused |
+| | | | bytes shall be filled with zero bytes. |
++-----------+--------+------------+---------------------------------------------------+
+| 0x128 | 4 | | busnum |
++-----------+--------+------------+---------------------------------------------------+
+| 0x12C | 4 | | devnum |
++-----------+--------+------------+---------------------------------------------------+
+| 0x130 | 4 | | speed |
++-----------+--------+------------+---------------------------------------------------+
+| 0x134 | 2 | | idVendor |
++-----------+--------+------------+---------------------------------------------------+
+| 0x136 | 2 | | idProduct |
++-----------+--------+------------+---------------------------------------------------+
+| 0x138 | 2 | | bcdDevice |
++-----------+--------+------------+---------------------------------------------------+
+| 0x139 | 1 | | bDeviceClass |
++-----------+--------+------------+---------------------------------------------------+
+| 0x13A | 1 | | bDeviceSubClass |
++-----------+--------+------------+---------------------------------------------------+
+| 0x13B | 1 | | bDeviceProtocol |
++-----------+--------+------------+---------------------------------------------------+
+| 0x13C | 1 | | bConfigurationValue |
++-----------+--------+------------+---------------------------------------------------+
+| 0x13D | 1 | | bNumConfigurations |
++-----------+--------+------------+---------------------------------------------------+
+| 0x13E | 1 | | bNumInterfaces |
++-----------+--------+------------+---------------------------------------------------+
-USBIP_CMD_SUBMIT: Submit an URB
+USBIP_CMD_SUBMIT:
+ Submit an URB
- Offset | Length | Value | Description
------------+--------+------------+---------------------------------------------------
- 0 | 4 | 0x00000001 | command: Submit an URB
------------+--------+------------+---------------------------------------------------
- 4 | 4 | | seqnum: the sequence number of the URB to submit
------------+--------+------------+---------------------------------------------------
- 8 | 4 | | devid
------------+--------+------------+---------------------------------------------------
- 0xC | 4 | | direction: 0: USBIP_DIR_OUT
- | | | 1: USBIP_DIR_IN
------------+--------+------------+---------------------------------------------------
- 0x10 | 4 | | ep: endpoint number, possible values are: 0...15
------------+--------+------------+---------------------------------------------------
- 0x14 | 4 | | transfer_flags: possible values depend on the
- | | | URB transfer type, see below
------------+--------+------------+---------------------------------------------------
- 0x18 | 4 | | transfer_buffer_length
------------+--------+------------+---------------------------------------------------
- 0x1C | 4 | | start_frame: specify the selected frame to
- | | | transmit an ISO frame, ignored if URB_ISO_ASAP
- | | | is specified at transfer_flags
------------+--------+------------+---------------------------------------------------
- 0x20 | 4 | | number_of_packets: number of ISO packets
------------+--------+------------+---------------------------------------------------
- 0x24 | 4 | | interval: maximum time for the request on the
- | | | server-side host controller
------------+--------+------------+---------------------------------------------------
- 0x28 | 8 | | setup: data bytes for USB setup, filled with
- | | | zeros if not used
------------+--------+------------+---------------------------------------------------
- 0x30 | | | URB data. For ISO transfers the padding between
- | | | each ISO packets is not transmitted.
++-----------+--------+------------+---------------------------------------------------+
+| Offset | Length | Value | Description |
++===========+========+============+===================================================+
+| 0 | 4 | 0x00000001 | command: Submit an URB |
++-----------+--------+------------+---------------------------------------------------+
+| 4 | 4 | | seqnum: the sequence number of the URB to submit |
++-----------+--------+------------+---------------------------------------------------+
+| 8 | 4 | | devid |
++-----------+--------+------------+---------------------------------------------------+
+| 0xC | 4 | | direction: |
+| | | | |
+| | | | - 0: USBIP_DIR_OUT |
+| | | | - 1: USBIP_DIR_IN |
++-----------+--------+------------+---------------------------------------------------+
+| 0x10 | 4 | | ep: endpoint number, possible values are: 0...15 |
++-----------+--------+------------+---------------------------------------------------+
+| 0x14 | 4 | | transfer_flags: possible values depend on the |
+| | | | URB transfer type, see below |
++-----------+--------+------------+---------------------------------------------------+
+| 0x18 | 4 | | transfer_buffer_length |
++-----------+--------+------------+---------------------------------------------------+
+| 0x1C | 4 | | start_frame: specify the selected frame to |
+| | | | transmit an ISO frame, ignored if URB_ISO_ASAP |
+| | | | is specified at transfer_flags |
++-----------+--------+------------+---------------------------------------------------+
+| 0x20 | 4 | | number_of_packets: number of ISO packets |
++-----------+--------+------------+---------------------------------------------------+
+| 0x24 | 4 | | interval: maximum time for the request on the |
+| | | | server-side host controller |
++-----------+--------+------------+---------------------------------------------------+
+| 0x28 | 8 | | setup: data bytes for USB setup, filled with |
+| | | | zeros if not used |
++-----------+--------+------------+---------------------------------------------------+
+| 0x30 | | | URB data. For ISO transfers the padding between |
+| | | | each ISO packets is not transmitted. |
++-----------+--------+------------+---------------------------------------------------+
- Allowed transfer_flags | value | control | interrupt | bulk | isochronous
- -------------------------+------------+---------+-----------+----------+-------------
- URB_SHORT_NOT_OK | 0x00000001 | only in | only in | only in | no
- URB_ISO_ASAP | 0x00000002 | no | no | no | yes
- URB_NO_TRANSFER_DMA_MAP | 0x00000004 | yes | yes | yes | yes
- URB_ZERO_PACKET | 0x00000040 | no | no | only out | no
- URB_NO_INTERRUPT | 0x00000080 | yes | yes | yes | yes
- URB_FREE_BUFFER | 0x00000100 | yes | yes | yes | yes
- URB_DIR_MASK | 0x00000200 | yes | yes | yes | yes
+ +-------------------------+------------+---------+-----------+----------+-------------+
+ | Allowed transfer_flags | value | control | interrupt | bulk | isochronous |
+ +=========================+============+=========+===========+==========+=============+
+ | URB_SHORT_NOT_OK | 0x00000001 | only in | only in | only in | no |
+ +-------------------------+------------+---------+-----------+----------+-------------+
+ | URB_ISO_ASAP | 0x00000002 | no | no | no | yes |
+ +-------------------------+------------+---------+-----------+----------+-------------+
+ | URB_NO_TRANSFER_DMA_MAP | 0x00000004 | yes | yes | yes | yes |
+ +-------------------------+------------+---------+-----------+----------+-------------+
+ | URB_ZERO_PACKET | 0x00000040 | no | no | only out | no |
+ +-------------------------+------------+---------+-----------+----------+-------------+
+ | URB_NO_INTERRUPT | 0x00000080 | yes | yes | yes | yes |
+ +-------------------------+------------+---------+-----------+----------+-------------+
+ | URB_FREE_BUFFER | 0x00000100 | yes | yes | yes | yes |
+ +-------------------------+------------+---------+-----------+----------+-------------+
+ | URB_DIR_MASK | 0x00000200 | yes | yes | yes | yes |
+ +-------------------------+------------+---------+-----------+----------+-------------+
-USBIP_RET_SUBMIT: Reply for submitting an URB
+USBIP_RET_SUBMIT:
+ Reply for submitting an URB
- Offset | Length | Value | Description
------------+--------+------------+---------------------------------------------------
- 0 | 4 | 0x00000003 | command
------------+--------+------------+---------------------------------------------------
- 4 | 4 | | seqnum: URB sequence number
------------+--------+------------+---------------------------------------------------
- 8 | 4 | | devid
------------+--------+------------+---------------------------------------------------
- 0xC | 4 | | direction: 0: USBIP_DIR_OUT
- | | | 1: USBIP_DIR_IN
------------+--------+------------+---------------------------------------------------
- 0x10 | 4 | | ep: endpoint number
------------+--------+------------+---------------------------------------------------
- 0x14 | 4 | | status: zero for successful URB transaction,
- | | | otherwise some kind of error happened.
------------+--------+------------+---------------------------------------------------
- 0x18 | 4 | n | actual_length: number of URB data bytes
------------+--------+------------+---------------------------------------------------
- 0x1C | 4 | | start_frame: for an ISO frame the actually
- | | | selected frame for transmit.
------------+--------+------------+---------------------------------------------------
- 0x20 | 4 | | number_of_packets
------------+--------+------------+---------------------------------------------------
- 0x24 | 4 | | error_count
------------+--------+------------+---------------------------------------------------
- 0x28 | 8 | | setup: data bytes for USB setup, filled with
- | | | zeros if not used
------------+--------+------------+---------------------------------------------------
- 0x30 | n | | URB data bytes. For ISO transfers the padding
- | | | between each ISO packets is not transmitted.
++-----------+--------+------------+---------------------------------------------------+
+| Offset | Length | Value | Description |
++===========+========+============+===================================================+
+| 0 | 4 | 0x00000003 | command |
++-----------+--------+------------+---------------------------------------------------+
+| 4 | 4 | | seqnum: URB sequence number |
++-----------+--------+------------+---------------------------------------------------+
+| 8 | 4 | | devid |
++-----------+--------+------------+---------------------------------------------------+
+| 0xC | 4 | | direction: |
+| | | | |
+| | | | - 0: USBIP_DIR_OUT |
+| | | | - 1: USBIP_DIR_IN |
++-----------+--------+------------+---------------------------------------------------+
+| 0x10 | 4 | | ep: endpoint number |
++-----------+--------+------------+---------------------------------------------------+
+| 0x14 | 4 | | status: zero for successful URB transaction, |
+| | | | otherwise some kind of error happened. |
++-----------+--------+------------+---------------------------------------------------+
+| 0x18 | 4 | n | actual_length: number of URB data bytes |
++-----------+--------+------------+---------------------------------------------------+
+| 0x1C | 4 | | start_frame: for an ISO frame the actually |
+| | | | selected frame for transmit. |
++-----------+--------+------------+---------------------------------------------------+
+| 0x20 | 4 | | number_of_packets |
++-----------+--------+------------+---------------------------------------------------+
+| 0x24 | 4 | | error_count |
++-----------+--------+------------+---------------------------------------------------+
+| 0x28 | 8 | | setup: data bytes for USB setup, filled with |
+| | | | zeros if not used |
++-----------+--------+------------+---------------------------------------------------+
+| 0x30 | n | | URB data bytes. For ISO transfers the padding |
+| | | | between each ISO packets is not transmitted. |
++-----------+--------+------------+---------------------------------------------------+
-USBIP_CMD_UNLINK: Unlink an URB
+USBIP_CMD_UNLINK:
+ Unlink an URB
- Offset | Length | Value | Description
------------+--------+------------+---------------------------------------------------
- 0 | 4 | 0x00000002 | command: URB unlink command
------------+--------+------------+---------------------------------------------------
- 4 | 4 | | seqnum: URB sequence number to unlink: FIXME: is this so?
------------+--------+------------+---------------------------------------------------
- 8 | 4 | | devid
------------+--------+------------+---------------------------------------------------
- 0xC | 4 | | direction: 0: USBIP_DIR_OUT
- | | | 1: USBIP_DIR_IN
------------+--------+------------+---------------------------------------------------
- 0x10 | 4 | | ep: endpoint number: zero
------------+--------+------------+---------------------------------------------------
- 0x14 | 4 | | seqnum: the URB sequence number given previously
- | | | at USBIP_CMD_SUBMIT.seqnum field
------------+--------+------------+---------------------------------------------------
- 0x30 | n | | URB data bytes. For ISO transfers the padding
- | | | between each ISO packets is not transmitted.
++-----------+--------+------------+---------------------------------------------------+
+| Offset | Length | Value | Description |
++===========+========+============+===================================================+
+| 0 | 4 | 0x00000002 | command: URB unlink command |
++-----------+--------+------------+---------------------------------------------------+
+| 4 | 4 | | seqnum: URB sequence number to unlink: |
+| | | | |
+| | | | FIXME: |
+| | | | is this so? |
++-----------+--------+------------+---------------------------------------------------+
+| 8 | 4 | | devid |
++-----------+--------+------------+---------------------------------------------------+
+| 0xC | 4 | | direction: |
+| | | | |
+| | | | - 0: USBIP_DIR_OUT |
+| | | | - 1: USBIP_DIR_IN |
++-----------+--------+------------+---------------------------------------------------+
+| 0x10 | 4 | | ep: endpoint number: zero |
++-----------+--------+------------+---------------------------------------------------+
+| 0x14 | 4 | | seqnum: the URB sequence number given previously |
+| | | | at USBIP_CMD_SUBMIT.seqnum field |
++-----------+--------+------------+---------------------------------------------------+
+| 0x30 | n | | URB data bytes. For ISO transfers the padding |
+| | | | between each ISO packets is not transmitted. |
++-----------+--------+------------+---------------------------------------------------+
-USBIP_RET_UNLINK: Reply for URB unlink
+USBIP_RET_UNLINK:
+ Reply for URB unlink
- Offset | Length | Value | Description
------------+--------+------------+---------------------------------------------------
- 0 | 4 | 0x00000004 | command: reply for the URB unlink command
------------+--------+------------+---------------------------------------------------
- 4 | 4 | | seqnum: the unlinked URB sequence number
------------+--------+------------+---------------------------------------------------
- 8 | 4 | | devid
------------+--------+------------+---------------------------------------------------
- 0xC | 4 | | direction: 0: USBIP_DIR_OUT
- | | | 1: USBIP_DIR_IN
------------+--------+------------+---------------------------------------------------
- 0x10 | 4 | | ep: endpoint number
------------+--------+------------+---------------------------------------------------
- 0x14 | 4 | | status: This is the value contained in the
- | | | urb->status in the URB completition handler.
- | | | FIXME: a better explanation needed.
------------+--------+------------+---------------------------------------------------
- 0x30 | n | | URB data bytes. For ISO transfers the padding
- | | | between each ISO packets is not transmitted.
++-----------+--------+------------+---------------------------------------------------+
+| Offset | Length | Value | Description |
++===========+========+============+===================================================+
+| 0 | 4 | 0x00000004 | command: reply for the URB unlink command |
++-----------+--------+------------+---------------------------------------------------+
+| 4 | 4 | | seqnum: the unlinked URB sequence number |
++-----------+--------+------------+---------------------------------------------------+
+| 8 | 4 | | devid |
++-----------+--------+------------+---------------------------------------------------+
+| 0xC | 4 | | direction: |
+| | | | |
+| | | | - 0: USBIP_DIR_OUT |
+| | | | - 1: USBIP_DIR_IN |
++-----------+--------+------------+---------------------------------------------------+
+| 0x10 | 4 | | ep: endpoint number |
++-----------+--------+------------+---------------------------------------------------+
+| 0x14 | 4 | | status: This is the value contained in the |
+| | | | urb->status in the URB completition handler. |
+| | | | |
+| | | | FIXME: |
+| | | | a better explanation needed. |
++-----------+--------+------------+---------------------------------------------------+
+| 0x30 | n | | URB data bytes. For ISO transfers the padding |
+| | | | between each ISO packets is not transmitted. |
++-----------+--------+------------+---------------------------------------------------+
