mfd: rtsx: Add output voltage switch hook
Different card reader has different method to switch output voltage,
add this callback to let the card reader implement its individual switch
function.
This is needed as rtl8411 has a specific switch output voltage procedure.
Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
diff --git a/drivers/mfd/rtl8411.c b/drivers/mfd/rtl8411.c
index 89f046ca..5058ba8 100644
--- a/drivers/mfd/rtl8411.c
+++ b/drivers/mfd/rtl8411.c
@@ -112,6 +112,21 @@
BPP_LDO_POWB, BPP_LDO_SUSPEND);
}
+static int rtl8411_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
+{
+ u8 mask, val;
+
+ mask = (BPP_REG_TUNED18 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_MASK;
+ if (voltage == OUTPUT_3V3)
+ val = (BPP_ASIC_3V3 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_3V3;
+ else if (voltage == OUTPUT_1V8)
+ val = (BPP_ASIC_1V8 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_1V8;
+ else
+ return -EINVAL;
+
+ return rtsx_pci_write_register(pcr, LDO_CTL, mask, val);
+}
+
static unsigned int rtl8411_cd_deglitch(struct rtsx_pcr *pcr)
{
unsigned int card_exist;
@@ -172,6 +187,7 @@
.disable_auto_blink = rtl8411_disable_auto_blink,
.card_power_on = rtl8411_card_power_on,
.card_power_off = rtl8411_card_power_off,
+ .switch_output_voltage = rtl8411_switch_output_voltage,
.cd_deglitch = rtl8411_cd_deglitch,
};
diff --git a/drivers/mfd/rts5209.c b/drivers/mfd/rts5209.c
index 283a4f1..ba74de8 100644
--- a/drivers/mfd/rts5209.c
+++ b/drivers/mfd/rts5209.c
@@ -144,6 +144,25 @@
return rtsx_pci_send_cmd(pcr, 100);
}
+static int rts5209_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
+{
+ int err;
+
+ if (voltage == OUTPUT_3V3) {
+ err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4FC0 | 0x24);
+ if (err < 0)
+ return err;
+ } else if (voltage == OUTPUT_1V8) {
+ err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4C40 | 0x24);
+ if (err < 0)
+ return err;
+ } else {
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static const struct pcr_ops rts5209_pcr_ops = {
.extra_init_hw = rts5209_extra_init_hw,
.optimize_phy = rts5209_optimize_phy,
@@ -153,6 +172,7 @@
.disable_auto_blink = rts5209_disable_auto_blink,
.card_power_on = rts5209_card_power_on,
.card_power_off = rts5209_card_power_off,
+ .switch_output_voltage = rts5209_switch_output_voltage,
.cd_deglitch = NULL,
};
diff --git a/drivers/mfd/rts5229.c b/drivers/mfd/rts5229.c
index b9dbab2..ec1747a 100644
--- a/drivers/mfd/rts5229.c
+++ b/drivers/mfd/rts5229.c
@@ -114,6 +114,25 @@
return rtsx_pci_send_cmd(pcr, 100);
}
+static int rts5229_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
+{
+ int err;
+
+ if (voltage == OUTPUT_3V3) {
+ err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4FC0 | 0x24);
+ if (err < 0)
+ return err;
+ } else if (voltage == OUTPUT_1V8) {
+ err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4C40 | 0x24);
+ if (err < 0)
+ return err;
+ } else {
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static const struct pcr_ops rts5229_pcr_ops = {
.extra_init_hw = rts5229_extra_init_hw,
.optimize_phy = rts5229_optimize_phy,
@@ -123,6 +142,7 @@
.disable_auto_blink = rts5229_disable_auto_blink,
.card_power_on = rts5229_card_power_on,
.card_power_off = rts5229_card_power_off,
+ .switch_output_voltage = rts5229_switch_output_voltage,
.cd_deglitch = NULL,
};
diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
index 7a7b0bd..f4e02d0 100644
--- a/drivers/mfd/rtsx_pcr.c
+++ b/drivers/mfd/rtsx_pcr.c
@@ -703,6 +703,15 @@
}
EXPORT_SYMBOL_GPL(rtsx_pci_card_power_off);
+int rtsx_pci_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
+{
+ if (pcr->ops->switch_output_voltage)
+ return pcr->ops->switch_output_voltage(pcr, voltage);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_switch_output_voltage);
+
unsigned int rtsx_pci_card_exist(struct rtsx_pcr *pcr)
{
unsigned int val;
