ARM: pm: only use preallocated page table during resume
Only use the preallocated page table during the resume, not while
suspending. This avoids the overhead of having to switch unnecessarily
to the resume page table in the suspend path.
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 035d57b..88fb3d9 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -379,27 +379,26 @@
/* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
.globl cpu_arm920_suspend_size
-.equ cpu_arm920_suspend_size, 4 * 4
+.equ cpu_arm920_suspend_size, 4 * 3
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_arm920_do_suspend)
- stmfd sp!, {r4 - r7, lr}
+ stmfd sp!, {r4 - r6, lr}
mrc p15, 0, r4, c13, c0, 0 @ PID
mrc p15, 0, r5, c3, c0, 0 @ Domain ID
- mrc p15, 0, r6, c2, c0, 0 @ TTB address
- mrc p15, 0, r7, c1, c0, 0 @ Control register
- stmia r0, {r4 - r7}
- ldmfd sp!, {r4 - r7, pc}
+ mrc p15, 0, r6, c1, c0, 0 @ Control register
+ stmia r0, {r4 - r6}
+ ldmfd sp!, {r4 - r6, pc}
ENDPROC(cpu_arm920_do_suspend)
ENTRY(cpu_arm920_do_resume)
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ invalidate I+D TLBs
mcr p15, 0, ip, c7, c7, 0 @ invalidate I+D caches
- ldmia r0, {r4 - r7}
+ ldmia r0, {r4 - r6}
mcr p15, 0, r4, c13, c0, 0 @ PID
mcr p15, 0, r5, c3, c0, 0 @ Domain ID
- mcr p15, 0, r6, c2, c0, 0 @ TTB address
- mov r0, r7 @ control register
+ mcr p15, 0, r1, c2, c0, 0 @ TTB address
+ mov r0, r6 @ control register
b cpu_resume_mmu
ENDPROC(cpu_arm920_do_resume)
#endif
