// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
 * Copyright (c) 2023, Linaro Ltd
 *
 * Based on sm6115.dtsi and previous efforts by Shawn Guo & Loic Poulain.
 */

#include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
#include <dt-bindings/clock/qcom,gcc-qcm2290.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/firmware/qcom,scm.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interconnect/qcom,qcm2290.h>
#include <dt-bindings/interconnect/qcom,rpm-icc.h>
#include <dt-bindings/power/qcom-rpmpd.h>

/ {
	interrupt-parent = <&intc>;

	#address-cells = <2>;
	#size-cells = <2>;

	chosen { };

	clocks {
		xo_board: xo-board {
			compatible = "fixed-clock";
			#clock-cells = <0>;
		};

		sleep_clk: sleep-clk {
			compatible = "fixed-clock";
			clock-frequency = <32764>;
			#clock-cells = <0>;
		};
	};

	cpus {
		#address-cells = <2>;
		#size-cells = <0>;

		CPU0: cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x0 0x0>;
			clocks = <&cpufreq_hw 0>;
			capacity-dmips-mhz = <1024>;
			dynamic-power-coefficient = <100>;
			enable-method = "psci";
			next-level-cache = <&L2_0>;
			qcom,freq-domain = <&cpufreq_hw 0>;
			power-domains = <&CPU_PD0>;
			power-domain-names = "psci";
			L2_0: l2-cache {
				compatible = "cache";
				cache-level = <2>;
				cache-unified;
			};
		};

		CPU1: cpu@1 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x0 0x1>;
			clocks = <&cpufreq_hw 0>;
			capacity-dmips-mhz = <1024>;
			dynamic-power-coefficient = <100>;
			enable-method = "psci";
			next-level-cache = <&L2_0>;
			qcom,freq-domain = <&cpufreq_hw 0>;
			power-domains = <&CPU_PD1>;
			power-domain-names = "psci";
		};

		CPU2: cpu@2 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x0 0x2>;
			clocks = <&cpufreq_hw 0>;
			capacity-dmips-mhz = <1024>;
			dynamic-power-coefficient = <100>;
			enable-method = "psci";
			next-level-cache = <&L2_0>;
			qcom,freq-domain = <&cpufreq_hw 0>;
			power-domains = <&CPU_PD2>;
			power-domain-names = "psci";
		};

		CPU3: cpu@3 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x0 0x3>;
			clocks = <&cpufreq_hw 0>;
			capacity-dmips-mhz = <1024>;
			dynamic-power-coefficient = <100>;
			enable-method = "psci";
			next-level-cache = <&L2_0>;
			qcom,freq-domain = <&cpufreq_hw 0>;
			power-domains = <&CPU_PD3>;
			power-domain-names = "psci";
		};

		cpu-map {
			cluster0 {
				core0 {
					cpu = <&CPU0>;
				};

				core1 {
					cpu = <&CPU1>;
				};

				core2 {
					cpu = <&CPU2>;
				};

				core3 {
					cpu = <&CPU3>;
				};
			};
		};

		domain-idle-states {
			CLUSTER_SLEEP: cluster-sleep-0 {
				compatible = "domain-idle-state";
				arm,psci-suspend-param = <0x41000043>;
				entry-latency-us = <800>;
				exit-latency-us = <2118>;
				min-residency-us = <7376>;
			};
		};

		idle-states {
			entry-method = "psci";

			CPU_SLEEP: cpu-sleep-0 {
				compatible = "arm,idle-state";
				idle-state-name = "power-collapse";
				arm,psci-suspend-param = <0x40000003>;
				entry-latency-us = <290>;
				exit-latency-us = <376>;
				min-residency-us = <1182>;
				local-timer-stop;
			};
		};
	};

	firmware {
		scm: scm {
			compatible = "qcom,scm-qcm2290", "qcom,scm";
			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
			clock-names = "core";
			#reset-cells = <1>;
			interconnects = <&system_noc MASTER_CRYPTO_CORE0 RPM_ALWAYS_TAG
					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
		};
	};

	memory@40000000 {
		device_type = "memory";
		/* We expect the bootloader to fill in the size */
		reg = <0 0x40000000 0 0>;
	};

	pmu {
		compatible = "arm,armv8-pmuv3";
		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
	};

	psci {
		compatible = "arm,psci-1.0";
		method = "smc";

		CPU_PD0: power-domain-cpu0 {
			#power-domain-cells = <0>;
			power-domains = <&CLUSTER_PD>;
			domain-idle-states = <&CPU_SLEEP>;
		};

		CPU_PD1: power-domain-cpu1 {
			#power-domain-cells = <0>;
			power-domains = <&CLUSTER_PD>;
			domain-idle-states = <&CPU_SLEEP>;
		};

		CPU_PD2: power-domain-cpu2 {
			#power-domain-cells = <0>;
			power-domains = <&CLUSTER_PD>;
			domain-idle-states = <&CPU_SLEEP>;
		};

		CPU_PD3: power-domain-cpu3 {
			#power-domain-cells = <0>;
			power-domains = <&CLUSTER_PD>;
			domain-idle-states = <&CPU_SLEEP>;
		};

		CLUSTER_PD: power-domain-cpu-cluster {
			#power-domain-cells = <0>;
			power-domains = <&mpm>;
			domain-idle-states = <&CLUSTER_SLEEP>;
		};
	};

	rpm: remoteproc {
		compatible = "qcom,qcm2290-rpm-proc", "qcom,rpm-proc";

		glink-edge {
			compatible = "qcom,glink-rpm";
			interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
			qcom,rpm-msg-ram = <&rpm_msg_ram>;
			mboxes = <&apcs_glb 0>;

			rpm_requests: rpm-requests {
				compatible = "qcom,rpm-qcm2290";
				qcom,glink-channels = "rpm_requests";

				rpmcc: clock-controller {
					compatible = "qcom,rpmcc-qcm2290", "qcom,rpmcc";
					clocks = <&xo_board>;
					clock-names = "xo";
					#clock-cells = <1>;
				};

				rpmpd: power-controller {
					compatible = "qcom,qcm2290-rpmpd";
					#power-domain-cells = <1>;
					operating-points-v2 = <&rpmpd_opp_table>;

					rpmpd_opp_table: opp-table {
						compatible = "operating-points-v2";

						rpmpd_opp_min_svs: opp1 {
							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
						};

						rpmpd_opp_low_svs: opp2 {
							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
						};

						rpmpd_opp_svs: opp3 {
							opp-level = <RPM_SMD_LEVEL_SVS>;
						};

						rpmpd_opp_svs_plus: opp4 {
							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
						};

						rpmpd_opp_nom: opp5 {
							opp-level = <RPM_SMD_LEVEL_NOM>;
						};

						rpmpd_opp_nom_plus: opp6 {
							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
						};

						rpmpd_opp_turbo: opp7 {
							opp-level = <RPM_SMD_LEVEL_TURBO>;
						};

						rpmpd_opp_turbo_plus: opp8 {
							opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
						};
					};
				};
			};
		};

		mpm: interrupt-controller {
			compatible = "qcom,mpm";
			qcom,rpm-msg-ram = <&apss_mpm>;
			interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
			mboxes = <&apcs_glb 1>;
			interrupt-controller;
			#interrupt-cells = <2>;
			#power-domain-cells = <0>;
			interrupt-parent = <&intc>;
			qcom,mpm-pin-count = <96>;
			qcom,mpm-pin-map = <2 275>,  /* TSENS0 uplow */
					   <5 296>,  /* Soundwire master_irq */
					   <12 422>, /* DWC3 ss_phy_irq */
					   <24 79>,  /* Soundwire wake_irq */
					   <86 183>, /* MPM wake, SPMI */
					   <90 260>; /* QUSB2_PHY DP+DM */
		};
	};

	reserved_memory: reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		hyp_mem: hyp@45700000 {
			reg = <0x0 0x45700000 0x0 0x600000>;
			no-map;
		};

		xbl_aop_mem: xbl-aop@45e00000 {
			reg = <0x0 0x45e00000 0x0 0x140000>;
			no-map;
		};

		sec_apps_mem: sec-apps@45fff000 {
			reg = <0x0 0x45fff000 0x0 0x1000>;
			no-map;
		};

		smem_mem: smem@46000000 {
			compatible = "qcom,smem";
			reg = <0x0 0x46000000 0x0 0x200000>;
			no-map;

			hwlocks = <&tcsr_mutex 3>;
			qcom,rpm-msg-ram = <&rpm_msg_ram>;
		};

		pil_modem_mem: modem@4ab00000 {
			reg = <0x0 0x4ab00000 0x0 0x6900000>;
			no-map;
		};

		pil_video_mem: video@51400000 {
			reg = <0x0 0x51400000 0x0 0x500000>;
			no-map;
		};

		wlan_msa_mem: wlan-msa@51900000 {
			reg = <0x0 0x51900000 0x0 0x100000>;
			no-map;
		};

		pil_adsp_mem: adsp@51a00000 {
			reg = <0x0 0x51a00000 0x0 0x1c00000>;
			no-map;
		};

		pil_ipa_fw_mem: ipa-fw@53600000 {
			reg = <0x0 0x53600000 0x0 0x10000>;
			no-map;
		};

		pil_ipa_gsi_mem: ipa-gsi@53610000 {
			reg = <0x0 0x53610000 0x0 0x5000>;
			no-map;
		};

		pil_gpu_mem: zap@53615000 {
			compatible = "shared-dma-pool";
			reg = <0x0 0x53615000 0x0 0x2000>;
			no-map;
		};

		cont_splash_memory: framebuffer@5c000000 {
			reg = <0x0 0x5c000000 0x0 0x00f00000>;
			no-map;
		};

		dfps_data_memory: dpfs-data@5cf00000 {
			reg = <0x0 0x5cf00000 0x0 0x0100000>;
			no-map;
		};

		removed_mem: reserved@60000000 {
			reg = <0x0 0x60000000 0x0 0x3900000>;
			no-map;
		};

		rmtfs_mem: memory@89b01000 {
			compatible = "qcom,rmtfs-mem";
			reg = <0x0 0x89b01000 0x0 0x200000>;
			no-map;

			qcom,client-id = <1>;
			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA QCOM_SCM_VMID_NAV>;
		};
	};

	smp2p-adsp {
		compatible = "qcom,smp2p";
		qcom,smem = <443>, <429>;

		interrupts = <GIC_SPI 279 IRQ_TYPE_EDGE_RISING>;

		mboxes = <&apcs_glb 10>;

		qcom,local-pid = <0>;
		qcom,remote-pid = <2>;

		adsp_smp2p_out: master-kernel {
			qcom,entry-name = "master-kernel";
			#qcom,smem-state-cells = <1>;
		};

		adsp_smp2p_in: slave-kernel {
			qcom,entry-name = "slave-kernel";
			interrupt-controller;
			#interrupt-cells = <2>;
		};
	};

	smp2p-mpss {
		compatible = "qcom,smp2p";
		qcom,smem = <435>, <428>;

		interrupts = <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>;

		mboxes = <&apcs_glb 14>;

		qcom,local-pid = <0>;
		qcom,remote-pid = <1>;

		modem_smp2p_out: master-kernel {
			qcom,entry-name = "master-kernel";
			#qcom,smem-state-cells = <1>;
		};

		modem_smp2p_in: slave-kernel {
			qcom,entry-name = "slave-kernel";
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		wlan_smp2p_in: wlan-wpss-to-ap {
			qcom,entry-name = "wlan";
			interrupt-controller;
			#interrupt-cells = <2>;
		};
	};

	soc: soc@0 {
		compatible = "simple-bus";
		#address-cells = <2>;
		#size-cells = <2>;
		ranges = <0 0 0 0 0x10 0>;
		dma-ranges = <0 0 0 0 0x10 0>;

		tcsr_mutex: hwlock@340000 {
			compatible = "qcom,tcsr-mutex";
			reg = <0x0 0x00340000 0x0 0x20000>;
			#hwlock-cells = <1>;
		};

		tcsr_regs: syscon@3c0000 {
			compatible = "qcom,qcm2290-tcsr", "syscon";
			reg = <0x0 0x003c0000 0x0 0x40000>;
		};

		tlmm: pinctrl@500000 {
			compatible = "qcom,qcm2290-tlmm";
			reg = <0x0 0x00500000 0x0 0x300000>;
			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			gpio-ranges = <&tlmm 0 0 127>;
			wakeup-parent = <&mpm>;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;

			qup_i2c0_default: qup-i2c0-default-state {
				pins = "gpio0", "gpio1";
				function = "qup0";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_i2c1_default: qup-i2c1-default-state {
				pins = "gpio4", "gpio5";
				function = "qup1";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_i2c2_default: qup-i2c2-default-state {
				pins = "gpio6", "gpio7";
				function = "qup2";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_i2c3_default: qup-i2c3-default-state {
				pins = "gpio8", "gpio9";
				function = "qup3";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_i2c4_default: qup-i2c4-default-state {
				pins = "gpio12", "gpio13";
				function = "qup4";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_i2c5_default: qup-i2c5-default-state {
				pins = "gpio14", "gpio15";
				function = "qup5";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_spi0_default: qup-spi0-default-state {
				pins = "gpio0", "gpio1","gpio2", "gpio3";
				function = "qup0";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_spi1_default: qup-spi1-default-state {
				pins = "gpio4", "gpio5", "gpio69", "gpio70";
				function = "qup1";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_spi2_default: qup-spi2-default-state {
				pins = "gpio6", "gpio7", "gpio71", "gpio80";
				function = "qup2";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_spi3_default: qup-spi3-default-state {
				pins = "gpio8", "gpio9", "gpio10", "gpio11";
				function = "qup3";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_spi4_default: qup-spi4-default-state {
				pins = "gpio12", "gpio13", "gpio96", "gpio97";
				function = "qup4";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_spi5_default: qup-spi5-default-state {
				pins = "gpio14", "gpio15", "gpio16", "gpio17";
				function = "qup5";
				drive-strength = <2>;
				bias-pull-up;
			};

			qup_uart0_default: qup-uart0-default-state {
				pins = "gpio0", "gpio1", "gpio2", "gpio3";
				function = "qup0";
				drive-strength = <2>;
				bias-disable;
			};

			qup_uart4_default: qup-uart4-default-state {
				pins = "gpio12", "gpio13";
				function = "qup4";
				drive-strength = <2>;
				bias-disable;
			};

			sdc1_state_on: sdc1-on-state {
				clk-pins {
					pins = "sdc1_clk";
					drive-strength = <16>;
					bias-disable;
				};

				cmd-pins {
					pins = "sdc1_cmd";
					drive-strength = <10>;
					bias-pull-up;
				};

				data-pins {
					pins = "sdc1_data";
					drive-strength = <10>;
					bias-pull-up;
				};

				rclk-pins {
					pins = "sdc1_rclk";
					bias-pull-down;
				};
			};

			sdc1_state_off: sdc1-off-state {
				clk-pins {
					pins = "sdc1_clk";
					drive-strength = <2>;
					bias-disable;
				};

				cmd-pins {
					pins = "sdc1_cmd";
					drive-strength = <2>;
					bias-pull-up;
				};

				data-pins {
					pins = "sdc1_data";
					drive-strength = <2>;
					bias-pull-up;
				};

				rclk-pins {
					pins = "sdc1_rclk";
					bias-pull-down;
				};
			};

			sdc2_state_on: sdc2-on-state {
				clk-pins {
					pins = "sdc2_clk";
					drive-strength = <16>;
					bias-disable;
				};

				cmd-pins {
					pins = "sdc2_cmd";
					drive-strength = <10>;
					bias-pull-up;
				};

				data-pins {
					pins = "sdc2_data";
					drive-strength = <10>;
					bias-pull-up;
				};
			};

			sdc2_state_off: sdc2-off-state {
				clk-pins {
					pins = "sdc2_clk";
					drive-strength = <2>;
					bias-disable;
				};

				cmd-pins {
					pins = "sdc2_cmd";
					drive-strength = <2>;
					bias-pull-up;
				};

				data-pins {
					pins = "sdc2_data";
					drive-strength = <2>;
					bias-pull-up;
				};
			};
		};

		gcc: clock-controller@1400000 {
			compatible = "qcom,gcc-qcm2290";
			reg = <0x0 0x01400000 0x0 0x1f0000>;
			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
			clock-names = "bi_tcxo", "sleep_clk";
			#clock-cells = <1>;
			#reset-cells = <1>;
			#power-domain-cells = <1>;
		};

		usb_hsphy: phy@1613000 {
			compatible = "qcom,qcm2290-qusb2-phy";
			reg = <0x0 0x01613000 0x0 0x180>;

			clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
			clock-names = "cfg_ahb", "ref";

			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
			nvmem-cells = <&qusb2_hstx_trim>;
			#phy-cells = <0>;

			status = "disabled";
		};

		usb_qmpphy: phy@1615000 {
			compatible = "qcom,qcm2290-qmp-usb3-phy";
			reg = <0x0 0x01615000 0x0 0x1000>;

			clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
			clock-names = "cfg_ahb",
				      "ref",
				      "com_aux",
				      "pipe";

			resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>,
				 <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>;
			reset-names = "phy",
				      "phy_phy";

			#clock-cells = <0>;
			clock-output-names = "usb3_phy_pipe_clk_src";

			#phy-cells = <0>;

			qcom,tcsr-reg = <&tcsr_regs 0xb244>;

			status = "disabled";
		};

		system_noc: interconnect@1880000 {
			compatible = "qcom,qcm2290-snoc";
			reg = <0x0 0x01880000 0x0 0x60200>;
			#interconnect-cells = <2>;

			qup_virt: interconnect-qup {
				compatible = "qcom,qcm2290-qup-virt";
				#interconnect-cells = <2>;
			};

			mmnrt_virt: interconnect-mmnrt {
				compatible = "qcom,qcm2290-mmnrt-virt";
				#interconnect-cells = <2>;
			};

			mmrt_virt: interconnect-mmrt {
				compatible = "qcom,qcm2290-mmrt-virt";
				#interconnect-cells = <2>;
			};
		};

		config_noc: interconnect@1900000 {
			compatible = "qcom,qcm2290-cnoc";
			reg = <0x0 0x01900000 0x0 0x8200>;
			#interconnect-cells = <2>;
		};

		qfprom@1b44000 {
			compatible = "qcom,qcm2290-qfprom", "qcom,qfprom";
			reg = <0x0 0x01b44000 0x0 0x3000>;
			#address-cells = <1>;
			#size-cells = <1>;

			qusb2_hstx_trim: hstx-trim@25b {
				reg = <0x25b 0x1>;
				bits = <1 4>;
			};
		};

		pmu@1b8e300 {
			compatible = "qcom,qcm2290-cpu-bwmon", "qcom,sdm845-bwmon";
			reg = <0x0 0x01b8e300 0x0 0x600>;
			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;

			operating-points-v2 = <&cpu_bwmon_opp_table>;
			interconnects = <&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG
					 &bimc SLAVE_EBI1 RPM_ACTIVE_TAG>;

			cpu_bwmon_opp_table: opp-table {
				compatible = "operating-points-v2";

				opp-0 {
					opp-peak-kBps = <(200 * 4 * 1000)>;
				};

				opp-1 {
					opp-peak-kBps = <(300 * 4 * 1000)>;
				};

				opp-2 {
					opp-peak-kBps = <(451 * 4 * 1000)>;
				};

				opp-3 {
					opp-peak-kBps = <(547 * 4 * 1000)>;
				};

				opp-4 {
					opp-peak-kBps = <(681 * 4 * 1000)>;
				};

				opp-5 {
					opp-peak-kBps = <(768 * 4 * 1000)>;
				};

				opp-6 {
					opp-peak-kBps = <(1017 * 4 * 1000)>;
				};

				opp-7 {
					opp-peak-kBps = <(1353 * 4 * 1000)>;
				};

				opp-8 {
					opp-peak-kBps = <(1555 * 4 * 1000)>;
				};

				opp-9 {
					opp-peak-kBps = <(1804 * 4 * 1000)>;
				};
			};
		};

		spmi_bus: spmi@1c40000 {
			compatible = "qcom,spmi-pmic-arb";
			reg = <0x0 0x01c40000 0x0 0x1100>,
			      <0x0 0x01e00000 0x0 0x2000000>,
			      <0x0 0x03e00000 0x0 0x100000>,
			      <0x0 0x03f00000 0x0 0xa0000>,
			      <0x0 0x01c0a000 0x0 0x26000>;
			reg-names = "core",
				    "chnls",
				    "obsrvr",
				    "intr",
				    "cnfg";
			interrupts-extended = <&mpm 86 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "periph_irq";
			qcom,ee = <0>;
			qcom,channel = <0>;
			#address-cells = <2>;
			#size-cells = <0>;
			interrupt-controller;
			#interrupt-cells = <4>;
		};

		tsens0: thermal-sensor@4411000 {
			compatible = "qcom,qcm2290-tsens", "qcom,tsens-v2";
			reg = <0x0 0x04411000 0x0 0x1ff>,
			      <0x0 0x04410000 0x0 0x8>;
			#qcom,sensors = <10>;
			interrupts-extended = <&mpm 2 IRQ_TYPE_LEVEL_HIGH>,
					      <&intc GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "uplow", "critical";
			#thermal-sensor-cells = <1>;
		};

		rng: rng@4453000 {
			compatible = "qcom,prng-ee";
			reg = <0x0 0x04453000 0x0 0x1000>;
			clocks = <&rpmcc RPM_SMD_HWKM_CLK>;
			clock-names = "core";
		};

		bimc: interconnect@4480000 {
			compatible = "qcom,qcm2290-bimc";
			reg = <0x0 0x04480000 0x0 0x80000>;
			#interconnect-cells = <2>;
		};

		rpm_msg_ram: sram@45f0000 {
			compatible = "qcom,rpm-msg-ram", "mmio-sram";
			reg = <0x0 0x045f0000 0x0 0x7000>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0 0x0 0x045f0000 0x7000>;

			apss_mpm: sram@1b8 {
				reg = <0x1b8 0x48>;
			};
		};

		sram@4690000 {
			compatible = "qcom,rpm-stats";
			reg = <0x0 0x04690000 0x0 0x10000>;
		};

		sdhc_1: mmc@4744000 {
			compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5";
			reg = <0x0 0x04744000 0x0 0x1000>,
			      <0x0 0x04745000 0x0 0x1000>,
			      <0x0 0x04748000 0x0 0x8000>;
			reg-names = "hc",
				    "cqhci",
				    "ice";

			interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "hc_irq", "pwr_irq";

			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
				 <&gcc GCC_SDCC1_APPS_CLK>,
				 <&rpmcc RPM_SMD_XO_CLK_SRC>,
				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
			clock-names = "iface",
				      "core",
				      "xo",
				      "ice";

			resets = <&gcc GCC_SDCC1_BCR>;

			power-domains = <&rpmpd QCM2290_VDDCX>;
			operating-points-v2 = <&sdhc1_opp_table>;
			iommus = <&apps_smmu 0xc0 0x0>;
			interconnects = <&system_noc MASTER_SDCC_1 RPM_ALWAYS_TAG
					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
					<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
					 &config_noc SLAVE_SDCC_1 RPM_ALWAYS_TAG>;
			interconnect-names = "sdhc-ddr",
					     "cpu-sdhc";

			qcom,dll-config = <0x000f642c>;
			qcom,ddr-config = <0x80040868>;
			bus-width = <8>;

			status = "disabled";

			sdhc1_opp_table: opp-table {
				compatible = "operating-points-v2";

				opp-100000000 {
					opp-hz = /bits/ 64 <100000000>;
					required-opps = <&rpmpd_opp_low_svs>;
					opp-peak-kBps = <250000 133320>;
					opp-avg-kBps = <102400 65000>;
				};

				opp-192000000 {
					opp-hz = /bits/ 64 <192000000>;
					required-opps = <&rpmpd_opp_low_svs>;
					opp-peak-kBps = <800000 300000>;
					opp-avg-kBps = <204800 200000>;
				};

				opp-384000000 {
					opp-hz = /bits/ 64 <384000000>;
					required-opps = <&rpmpd_opp_svs_plus>;
					opp-peak-kBps = <800000 300000>;
					opp-avg-kBps = <204800 200000>;
				};
			};
		};

		sdhc_2: mmc@4784000 {
			compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5";
			reg = <0x0 0x04784000 0x0 0x1000>;
			reg-names = "hc";

			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "hc_irq", "pwr_irq";

			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
				 <&gcc GCC_SDCC2_APPS_CLK>,
				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
			clock-names = "iface",
				      "core",
				      "xo";

			resets = <&gcc GCC_SDCC2_BCR>;

			power-domains = <&rpmpd QCM2290_VDDCX>;
			operating-points-v2 = <&sdhc2_opp_table>;
			iommus = <&apps_smmu 0xa0 0x0>;
			interconnects = <&system_noc MASTER_SDCC_2 RPM_ALWAYS_TAG
					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
					<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
					 &config_noc SLAVE_SDCC_2 RPM_ALWAYS_TAG>;
			interconnect-names = "sdhc-ddr",
					     "cpu-sdhc";

			qcom,dll-config = <0x0007642c>;
			qcom,ddr-config = <0x80040868>;
			bus-width = <4>;

			status = "disabled";

			sdhc2_opp_table: opp-table {
				compatible = "operating-points-v2";

				opp-100000000 {
					opp-hz = /bits/ 64 <100000000>;
					required-opps = <&rpmpd_opp_low_svs>;
					opp-peak-kBps = <250000 133320>;
					opp-avg-kBps = <261438 150000>;
				};

				opp-202000000 {
					opp-hz = /bits/ 64 <202000000>;
					required-opps = <&rpmpd_opp_svs_plus>;
					opp-peak-kBps = <800000 300000>;
					opp-avg-kBps = <261438 300000>;
				};
			};
		};

		gpi_dma0: dma-controller@4a00000 {
			compatible = "qcom,qcm2290-gpi-dma", "qcom,sm6350-gpi-dma";
			reg = <0x0 0x04a00000 0x0 0x60000>;
			interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
			dma-channels = <10>;
			dma-channel-mask = <0x1f>;
			iommus = <&apps_smmu 0xf6 0x0>;
			#dma-cells = <3>;
			status = "disabled";
		};

		qupv3_id_0: geniqup@4ac0000 {
			compatible = "qcom,geni-se-qup";
			reg = <0x0 0x04ac0000 0x0 0x2000>;
			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
			clock-names = "m-ahb", "s-ahb";
			iommus = <&apps_smmu 0xe3 0x0>;
			#address-cells = <2>;
			#size-cells = <2>;
			ranges;
			status = "disabled";

			i2c0: i2c@4a80000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x04a80000 0x0 0x4000>;
				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
				clock-names = "se";
				pinctrl-0 = <&qup_i2c0_default>;
				pinctrl-names = "default";
				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";
				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			spi0: spi@4a80000 {
				compatible = "qcom,geni-spi";
				reg = <0x0 0x04a80000 0x0 0x4000>;
				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
				clock-names = "se";
				pinctrl-0 = <&qup_spi0_default>;
				pinctrl-names = "default";
				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
				dma-names = "tx", "rx";
				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			uart0: serial@4a80000 {
				compatible = "qcom,geni-uart";
				reg = <0x0 0x04a80000 0x0 0x4000>;
				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
				clock-names = "se";
				pinctrl-0 = <&qup_uart0_default>;
				pinctrl-names = "default";
				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config";
				status = "disabled";
			};

			i2c1: i2c@4a84000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x04a84000 0x0 0x4000>;
				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
				clock-names = "se";
				pinctrl-0 = <&qup_i2c1_default>;
				pinctrl-names = "default";
				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";
				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			spi1: spi@4a84000 {
				compatible = "qcom,geni-spi";
				reg = <0x0 0x04a84000 0x0 0x4000>;
				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
				clock-names = "se";
				pinctrl-0 = <&qup_spi1_default>;
				pinctrl-names = "default";
				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
				dma-names = "tx", "rx";
				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			i2c2: i2c@4a88000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x04a88000 0x0 0x4000>;
				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
				clock-names = "se";
				pinctrl-0 = <&qup_i2c2_default>;
				pinctrl-names = "default";
				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";
				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			spi2: spi@4a88000 {
				compatible = "qcom,geni-spi";
				reg = <0x0 0x04a88000 0x0 0x4000>;
				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
				clock-names = "se";
				pinctrl-0 = <&qup_spi2_default>;
				pinctrl-names = "default";
				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
				dma-names = "tx", "rx";
				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			i2c3: i2c@4a8c000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x04a8c000 0x0 0x4000>;
				interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
				clock-names = "se";
				pinctrl-0 = <&qup_i2c3_default>;
				pinctrl-names = "default";
				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";
				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			spi3: spi@4a8c000 {
				compatible = "qcom,geni-spi";
				reg = <0x0 0x04a8c000 0x0 0x4000>;
				interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
				clock-names = "se";
				pinctrl-0 = <&qup_spi3_default>;
				pinctrl-names = "default";
				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
				dma-names = "tx", "rx";
				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			i2c4: i2c@4a90000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x04a90000 0x0 0x4000>;
				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
				clock-names = "se";
				pinctrl-0 = <&qup_i2c4_default>;
				pinctrl-names = "default";
				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";
				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			spi4: spi@4a90000 {
				compatible = "qcom,geni-spi";
				reg = <0x0 0x04a90000 0x0 0x4000>;
				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
				clock-names = "se";
				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
				pinctrl-names = "default";
				pinctrl-0 = <&qup_spi4_default>;
				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
				dma-names = "tx", "rx";
				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			uart4: serial@4a90000 {
				compatible = "qcom,geni-uart";
				reg = <0x0 0x04a90000 0x0 0x4000>;
				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
				clock-names = "se";
				pinctrl-0 = <&qup_uart4_default>;
				pinctrl-names = "default";
				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config";
				status = "disabled";
			};

			i2c5: i2c@4a94000 {
				compatible = "qcom,geni-i2c";
				reg = <0x0 0x04a94000 0x0 0x4000>;
				interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
				clock-names = "se";
				pinctrl-0 = <&qup_i2c5_default>;
				pinctrl-names = "default";
				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
				dma-names = "tx", "rx";
				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config",
						     "qup-memory";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			spi5: spi@4a94000 {
				compatible = "qcom,geni-spi";
				reg = <0x0 0x04a94000 0x0 0x4000>;
				interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
				clock-names = "se";
				pinctrl-0 = <&qup_spi5_default>;
				pinctrl-names = "default";
				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
				dma-names = "tx", "rx";
				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
				interconnect-names = "qup-core",
						     "qup-config";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};
		};

		usb: usb@4ef8800 {
			compatible = "qcom,qcm2290-dwc3", "qcom,dwc3";
			reg = <0x0 0x04ef8800 0x0 0x400>;
			interrupts-extended = <&intc GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
					      <&mpm 12 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "hs_phy_irq",
					  "ss_phy_irq";

			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
				 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
			clock-names = "cfg_noc",
				      "core",
				      "iface",
				      "sleep",
				      "mock_utmi",
				      "xo";

			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
			assigned-clock-rates = <19200000>, <133333333>;

			resets = <&gcc GCC_USB30_PRIM_BCR>;
			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
			/* TODO: USB<->IPA path */
			interconnects = <&system_noc MASTER_USB3_0 RPM_ALWAYS_TAG
					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
					<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
					 &config_noc SLAVE_USB3 RPM_ALWAYS_TAG>;
			interconnect-names = "usb-ddr",
					     "apps-usb";
			wakeup-source;

			#address-cells = <2>;
			#size-cells = <2>;
			ranges;

			status = "disabled";

			usb_dwc3: usb@4e00000 {
				compatible = "snps,dwc3";
				reg = <0x0 0x04e00000 0x0 0xcd00>;
				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
				phys = <&usb_hsphy>, <&usb_qmpphy>;
				phy-names = "usb2-phy", "usb3-phy";
				iommus = <&apps_smmu 0x120 0x0>;
				snps,dis_u2_susphy_quirk;
				snps,dis_enblslpm_quirk;
				snps,has-lpm-erratum;
				snps,hird-threshold = /bits/ 8 <0x10>;
				snps,usb3_lpm_capable;
				maximum-speed = "super-speed";
				dr_mode = "otg";
			};
		};

		mdss: display-subsystem@5e00000 {
			compatible = "qcom,qcm2290-mdss";
			reg = <0x0 0x05e00000 0x0 0x1000>;
			reg-names = "mdss";
			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-controller;
			#interrupt-cells = <1>;

			clocks = <&gcc GCC_DISP_AHB_CLK>,
				 <&gcc GCC_DISP_HF_AXI_CLK>,
				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
			clock-names = "iface",
				      "bus",
				      "core";

			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;

			power-domains = <&dispcc MDSS_GDSC>;

			iommus = <&apps_smmu 0x420 0x2>,
				 <&apps_smmu 0x421 0x0>;
			interconnects = <&mmrt_virt MASTER_MDP0 RPM_ALWAYS_TAG
					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
					<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
					 &config_noc SLAVE_DISPLAY_CFG RPM_ALWAYS_TAG>;
			interconnect-names = "mdp0-mem",
					     "cpu-cfg";

			#address-cells = <2>;
			#size-cells = <2>;
			ranges;

			status = "disabled";

			mdp: display-controller@5e01000 {
				compatible = "qcom,qcm2290-dpu";
				reg = <0x0 0x05e01000 0x0 0x8f000>,
				      <0x0 0x05eb0000 0x0 0x2008>;
				reg-names = "mdp",
					    "vbif";

				interrupt-parent = <&mdss>;
				interrupts = <0>;

				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
				clock-names = "bus",
					      "iface",
					      "core",
					      "lut",
					      "vsync";

				operating-points-v2 = <&mdp_opp_table>;
				power-domains = <&rpmpd QCM2290_VDDCX>;

				ports {
					#address-cells = <1>;
					#size-cells = <0>;

					port@0 {
						reg = <0>;
						dpu_intf1_out: endpoint {
							remote-endpoint = <&mdss_dsi0_in>;
						};
					};
				};

				mdp_opp_table: opp-table {
					compatible = "operating-points-v2";

					opp-19200000 {
						opp-hz = /bits/ 64 <19200000>;
						required-opps = <&rpmpd_opp_min_svs>;
					};

					opp-192000000 {
						opp-hz = /bits/ 64 <192000000>;
						required-opps = <&rpmpd_opp_low_svs>;
					};

					opp-256000000 {
						opp-hz = /bits/ 64 <256000000>;
						required-opps = <&rpmpd_opp_svs>;
					};

					opp-307200000 {
						opp-hz = /bits/ 64 <307200000>;
						required-opps = <&rpmpd_opp_svs_plus>;
					};

					opp-384000000 {
						opp-hz = /bits/ 64 <384000000>;
						required-opps = <&rpmpd_opp_nom>;
					};
				};
			};

			mdss_dsi0: dsi@5e94000 {
				compatible = "qcom,qcm2290-dsi-ctrl", "qcom,mdss-dsi-ctrl";
				reg = <0x0 0x05e94000 0x0 0x400>;
				reg-names = "dsi_ctrl";

				interrupt-parent = <&mdss>;
				interrupts = <4>;

				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
					 <&gcc GCC_DISP_HF_AXI_CLK>;
				clock-names = "byte",
					      "byte_intf",
					      "pixel",
					      "core",
					      "iface",
					      "bus";

				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
				assigned-clock-parents = <&mdss_dsi0_phy 0>,
							 <&mdss_dsi0_phy 1>;

				operating-points-v2 = <&dsi_opp_table>;
				power-domains = <&rpmpd QCM2290_VDDCX>;
				phys = <&mdss_dsi0_phy>;

				#address-cells = <1>;
				#size-cells = <0>;

				status = "disabled";

				dsi_opp_table: opp-table {
					compatible = "operating-points-v2";

					opp-19200000 {
						opp-hz = /bits/ 64 <19200000>;
						required-opps = <&rpmpd_opp_min_svs>;
					};

					opp-164000000 {
						opp-hz = /bits/ 64 <164000000>;
						required-opps = <&rpmpd_opp_low_svs>;
					};

					opp-187500000 {
						opp-hz = /bits/ 64 <187500000>;
						required-opps = <&rpmpd_opp_svs>;
					};
				};

				ports {
					#address-cells = <1>;
					#size-cells = <0>;

					port@0 {
						reg = <0>;

						mdss_dsi0_in: endpoint {
							remote-endpoint = <&dpu_intf1_out>;
						};
					};

					port@1 {
						reg = <1>;

						mdss_dsi0_out: endpoint {
						};
					};
				};
			};

			mdss_dsi0_phy: phy@5e94400 {
				compatible = "qcom,dsi-phy-14nm-2290";
				reg = <0x0 0x05e94400 0x0 0x100>,
				      <0x0 0x05e94500 0x0 0x300>,
				      <0x0 0x05e94800 0x0 0x188>;
				reg-names = "dsi_phy",
					    "dsi_phy_lane",
					    "dsi_pll";

				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
				clock-names = "iface",
					      "ref";

				power-domains = <&rpmpd QCM2290_VDDMX>;
				required-opps = <&rpmpd_opp_nom>;

				#clock-cells = <1>;
				#phy-cells = <0>;

				status = "disabled";
			};
		};

		dispcc: clock-controller@5f00000 {
			compatible = "qcom,qcm2290-dispcc";
			reg = <0x0 0x05f00000 0x0 0x20000>;
			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
				 <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
				 <&mdss_dsi0_phy 0>,
				 <&mdss_dsi0_phy 1>;
			clock-names = "bi_tcxo",
				      "bi_tcxo_ao",
				      "gcc_disp_gpll0_clk_src",
				      "gcc_disp_gpll0_div_clk_src",
				      "dsi0_phy_pll_out_byteclk",
				      "dsi0_phy_pll_out_dsiclk";
			#power-domain-cells = <1>;
			#clock-cells = <1>;
			#reset-cells = <1>;
		};

		remoteproc_mpss: remoteproc@6080000 {
			compatible = "qcom,qcm2290-mpss-pas", "qcom,sm6115-mpss-pas";
			reg = <0x0 0x06080000 0x0 0x100>;

			interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>,
					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
			interrupt-names = "wdog",
					  "fatal",
					  "ready",
					  "handover",
					  "stop-ack",
					  "shutdown-ack";

			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
			clock-names = "xo";

			power-domains = <&rpmpd QCM2290_VDDCX>;

			memory-region = <&pil_modem_mem>;

			qcom,smem-states = <&modem_smp2p_out 0>;
			qcom,smem-state-names = "stop";

			status = "disabled";

			glink-edge {
				interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
				label = "mpss";
				qcom,remote-pid = <1>;
				mboxes = <&apcs_glb 12>;
			};
		};

		remoteproc_adsp: remoteproc@ab00000 {
			compatible = "qcom,qcm2290-adsp-pas", "qcom,sm6115-adsp-pas";
			reg = <0x0 0x0ab00000 0x0 0x100>;

			interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>,
					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
			interrupt-names = "wdog",
					  "fatal",
					  "ready",
					  "handover",
					  "stop-ack";

			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
			clock-names = "xo";

			power-domains = <&rpmpd QCM2290_VDD_LPI_CX>,
					<&rpmpd QCM2290_VDD_LPI_MX>;

			memory-region = <&pil_adsp_mem>;

			qcom,smem-states = <&adsp_smp2p_out 0>;
			qcom,smem-state-names = "stop";

			status = "disabled";

			glink-edge {
				interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
				label = "lpass";
				qcom,remote-pid = <2>;
				mboxes = <&apcs_glb 8>;
			};
		};

		apps_smmu: iommu@c600000 {
			compatible = "qcom,qcm2290-smmu-500", "qcom,smmu-500", "arm,mmu-500";
			reg = <0x0 0x0c600000 0x0 0x80000>;
			#iommu-cells = <2>;
			#global-interrupts = <1>;

			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
		};

		wifi: wifi@c800000 {
			compatible = "qcom,wcn3990-wifi";
			reg = <0x0 0x0c800000 0x0 0x800000>;
			reg-names = "membase";
			memory-region = <&wlan_msa_mem>;
			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
			iommus = <&apps_smmu 0x1a0 0x1>;
			qcom,msa-fixed-perm;
			status = "disabled";
		};

		watchdog@f017000 {
			compatible = "qcom,apss-wdt-qcm2290", "qcom,kpss-wdt";
			reg = <0x0 0x0f017000 0x0 0x1000>;
			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>,
				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&sleep_clk>;
		};

		apcs_glb: mailbox@f111000 {
			compatible = "qcom,qcm2290-apcs-hmss-global";
			reg = <0x0 0x0f111000 0x0 0x1000>;
			#mbox-cells = <1>;
		};

		timer@f120000 {
			compatible = "arm,armv7-timer-mem";
			reg = <0x0 0x0f120000 0x0 0x1000>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0 0x0 0x0f121000 0x8000>;

			frame@0 {
				reg = <0x0 0x1000>,
				      <0x1000 0x1000>;
				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
				frame-number = <0>;
			};

			frame@2000 {
				reg = <0x2000 0x1000>;
				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
				frame-number = <1>;
				status = "disabled";
			};

			frame@3000 {
				reg = <0x3000 0x1000>;
				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
				frame-number = <2>;
				status = "disabled";
			};

			frame@4000 {
				reg = <0x4000 0x1000>;
				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
				frame-number = <3>;
				status = "disabled";
			};

			frame@5000 {
				reg = <0x5000 0x1000>;
				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
				frame-number = <4>;
				status = "disabled";
			};

			frame@6000 {
				reg = <0x6000 0x1000>;
				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
				frame-number = <5>;
				status = "disabled";
			};

			frame@7000 {
				reg = <0x7000 0x1000>;
				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
				frame-number = <6>;
				status = "disabled";
			};
		};

		intc: interrupt-controller@f200000 {
			compatible = "arm,gic-v3";
			reg = <0x0 0x0f200000 0x0 0x10000>,
			      <0x0 0x0f300000 0x0 0x100000>;
			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
			#interrupt-cells = <3>;
			interrupt-controller;
			interrupt-parent = <&intc>;
			#redistributor-regions = <1>;
			redistributor-stride = <0x0 0x20000>;
		};

		cpufreq_hw: cpufreq@f521000 {
			compatible = "qcom,qcm2290-cpufreq-hw", "qcom,cpufreq-hw";
			reg = <0x0 0x0f521000 0x0 0x1000>;
			reg-names = "freq-domain0";
			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "dcvsh-irq-0";
			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
			clock-names = "xo", "alternate";

			#freq-domain-cells = <1>;
			#clock-cells = <1>;
		};
	};

	thermal-zones {
		mapss-thermal {
			polling-delay-passive = <0>;
			polling-delay = <0>;

			thermal-sensors = <&tsens0 0>;

			trips {
				mapss_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				mapss_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				mapss_crit: mapss-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		video-thermal {
			polling-delay-passive = <0>;
			polling-delay = <0>;

			thermal-sensors = <&tsens0 1>;

			trips {
				video_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				video_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				video_crit: video-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		wlan-thermal {
			polling-delay-passive = <0>;
			polling-delay = <0>;

			thermal-sensors = <&tsens0 2>;

			trips {
				wlan_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				wlan_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				wlan_crit: wlan-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		cpuss0-thermal {
			polling-delay-passive = <0>;
			polling-delay = <0>;

			thermal-sensors = <&tsens0 3>;

			trips {
				cpuss0_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpuss0_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpuss0_crit: cpuss0-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		cpuss1-thermal {
			polling-delay-passive = <0>;
			polling-delay = <0>;

			thermal-sensors = <&tsens0 4>;

			trips {
				cpuss1_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpuss1_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpuss1_crit: cpuss1-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		mdm0-thermal {
			polling-delay-passive = <0>;
			polling-delay = <0>;

			thermal-sensors = <&tsens0 5>;

			trips {
				mdm0_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				mdm0_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				mdm0_crit: mdm0-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		mdm1-thermal {
			polling-delay-passive = <0>;
			polling-delay = <0>;

			thermal-sensors = <&tsens0 6>;

			trips {
				mdm1_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				mdm1_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				mdm1_crit: mdm1-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		gpu-thermal {
			polling-delay-passive = <0>;
			polling-delay = <0>;

			thermal-sensors = <&tsens0 7>;

			trips {
				gpu_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				gpu_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				gpu_crit: gpu-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		hm-center-thermal {
			polling-delay-passive = <0>;
			polling-delay = <0>;

			thermal-sensors = <&tsens0 8>;

			trips {
				hm_center_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				hm_center_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				hm_center_crit: hm-center-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		camera-thermal {
			polling-delay-passive = <0>;
			polling-delay = <0>;

			thermal-sensors = <&tsens0 9>;

			trips {
				camera_alert0: trip-point0 {
					temperature = <90000>;
					hysteresis = <2000>;
					type = "passive";
				};

				camera_alert1: trip-point1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "passive";
				};

				camera_crit: camera-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};
	};

	timer {
		compatible = "arm,armv8-timer";
		interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
	};
};