================
bpftool-map
================
-------------------------------------------------------------------------------
tool for inspection and simple manipulation of eBPF maps
-------------------------------------------------------------------------------

:Manual section: 8

SYNOPSIS
========

	**bpftool** [*OPTIONS*] **map** *COMMAND*

	*OPTIONS* := { { **-j** | **--json** } [{ **-p** | **--pretty** }] | { **-f** | **--bpffs** } }

	*COMMANDS* :=
	{ **show** | **list** | **create** | **dump** | **update** | **lookup** | **getnext**
	| **delete** | **pin** | **help** }

MAP COMMANDS
=============

|	**bpftool** **map { show | list }**   [*MAP*]
|	**bpftool** **map create**     *FILE* **type** *TYPE* **key** *KEY_SIZE* **value** *VALUE_SIZE* \
|		**entries** *MAX_ENTRIES* **name** *NAME* [**flags** *FLAGS*] [**dev** *NAME*]
|	**bpftool** **map dump**       *MAP*
|	**bpftool** **map update**     *MAP*  **key** *DATA*   **value** *VALUE* [*UPDATE_FLAGS*]
|	**bpftool** **map lookup**     *MAP*  **key** *DATA*
|	**bpftool** **map getnext**    *MAP* [**key** *DATA*]
|	**bpftool** **map delete**     *MAP*  **key** *DATA*
|	**bpftool** **map pin**        *MAP*  *FILE*
|	**bpftool** **map event_pipe** *MAP* [**cpu** *N* **index** *M*]
|	**bpftool** **map help**
|
|	*MAP* := { **id** *MAP_ID* | **pinned** *FILE* }
|	*DATA* := { [**hex**] *BYTES* }
|	*PROG* := { **id** *PROG_ID* | **pinned** *FILE* | **tag** *PROG_TAG* }
|	*VALUE* := { *DATA* | *MAP* | *PROG* }
|	*UPDATE_FLAGS* := { **any** | **exist** | **noexist** }
|	*TYPE* := { **hash** | **array** | **prog_array** | **perf_event_array** | **percpu_hash**
|		| **percpu_array** | **stack_trace** | **cgroup_array** | **lru_hash**
|		| **lru_percpu_hash** | **lpm_trie** | **array_of_maps** | **hash_of_maps**
|		| **devmap** | **sockmap** | **cpumap** | **xskmap** | **sockhash**
|		| **cgroup_storage** | **reuseport_sockarray** | **percpu_cgroup_storage**
|		| **queue** | **stack** }

DESCRIPTION
===========
	**bpftool map { show | list }**   [*MAP*]
		  Show information about loaded maps.  If *MAP* is specified
		  show information only about given map, otherwise list all
		  maps currently loaded on the system.

		  Output will start with map ID followed by map type and
		  zero or more named attributes (depending on kernel version).

	**bpftool map create** *FILE* **type** *TYPE* **key** *KEY_SIZE* **value** *VALUE_SIZE*  **entries** *MAX_ENTRIES* **name** *NAME* [**flags** *FLAGS*] [**dev** *NAME*]
		  Create a new map with given parameters and pin it to *bpffs*
		  as *FILE*.

	**bpftool map dump**    *MAP*
		  Dump all entries in a given *MAP*.

	**bpftool map update**  *MAP*  **key** *DATA*   **value** *VALUE* [*UPDATE_FLAGS*]
		  Update map entry for a given *KEY*.

		  *UPDATE_FLAGS* can be one of: **any** update existing entry
		  or add if doesn't exit; **exist** update only if entry already
		  exists; **noexist** update only if entry doesn't exist.

		  If the **hex** keyword is provided in front of the bytes
		  sequence, the bytes are parsed as hexadeximal values, even if
		  no "0x" prefix is added. If the keyword is not provided, then
		  the bytes are parsed as decimal values, unless a "0x" prefix
		  (for hexadecimal) or a "0" prefix (for octal) is provided.

	**bpftool map lookup**  *MAP*  **key** *DATA*
		  Lookup **key** in the map.

	**bpftool map getnext** *MAP* [**key** *DATA*]
		  Get next key.  If *key* is not specified, get first key.

	**bpftool map delete**  *MAP*  **key** *DATA*
		  Remove entry from the map.

	**bpftool map pin**     *MAP*  *FILE*
		  Pin map *MAP* as *FILE*.

		  Note: *FILE* must be located in *bpffs* mount. It must not
		  contain a dot character ('.'), which is reserved for future
		  extensions of *bpffs*.

	**bpftool** **map event_pipe** *MAP* [**cpu** *N* **index** *M*]
		  Read events from a BPF_MAP_TYPE_PERF_EVENT_ARRAY map.

		  Install perf rings into a perf event array map and dump
		  output of any bpf_perf_event_output() call in the kernel.
		  By default read the number of CPUs on the system and
		  install perf ring for each CPU in the corresponding index
		  in the array.

		  If **cpu** and **index** are specified, install perf ring
		  for given **cpu** at **index** in the array (single ring).

		  Note that installing a perf ring into an array will silently
		  replace any existing ring.  Any other application will stop
		  receiving events if it installed its rings earlier.

	**bpftool map help**
		  Print short help message.

OPTIONS
=======
	-h, --help
		  Print short generic help message (similar to **bpftool help**).

	-v, --version
		  Print version number (similar to **bpftool version**).

	-j, --json
		  Generate JSON output. For commands that cannot produce JSON, this
		  option has no effect.

	-p, --pretty
		  Generate human-readable JSON output. Implies **-j**.

	-f, --bpffs
		  Show file names of pinned maps.

	-n, --nomount
		  Do not automatically attempt to mount any virtual file system
		  (such as tracefs or BPF virtual file system) when necessary.

EXAMPLES
========
**# bpftool map show**
::

  10: hash  name some_map  flags 0x0
	key 4B  value 8B  max_entries 2048  memlock 167936B

The following three commands are equivalent:

|
| **# bpftool map update id 10 key hex   20   c4   b7   00 value hex   0f   ff   ff   ab   01   02   03   4c**
| **# bpftool map update id 10 key     0x20 0xc4 0xb7 0x00 value     0x0f 0xff 0xff 0xab 0x01 0x02 0x03 0x4c**
| **# bpftool map update id 10 key       32  196  183    0 value       15  255  255  171    1    2    3   76**

**# bpftool map lookup id 10 key 0 1 2 3**

::

  key: 00 01 02 03 value: 00 01 02 03 04 05 06 07


**# bpftool map dump id 10**
::

  key: 00 01 02 03  value: 00 01 02 03 04 05 06 07
  key: 0d 00 07 00  value: 02 00 00 00 01 02 03 04
  Found 2 elements

**# bpftool map getnext id 10 key 0 1 2 3**
::

  key:
  00 01 02 03
  next key:
  0d 00 07 00

|
| **# mount -t bpf none /sys/fs/bpf/**
| **# bpftool map pin id 10 /sys/fs/bpf/map**
| **# bpftool map del pinned /sys/fs/bpf/map key 13 00 07 00**

Note that map update can also be used in order to change the program references
hold by a program array map. This can be used, for example, to change the
programs used for tail-call jumps at runtime, without having to reload the
entry-point program. Below is an example for this use case: we load a program
defining a prog array map, and with a main function that contains a tail call
to other programs that can be used either to "process" packets or to "debug"
processing. Note that the prog array map MUST be pinned into the BPF virtual
file system for the map update to work successfully, as kernel flushes prog
array maps when they have no more references from user space (and the update
would be lost as soon as bpftool exits).

|
| **# bpftool prog loadall tail_calls.o /sys/fs/bpf/foo type xdp**
| **# bpftool prog --bpffs**

::

  545: xdp  name main_func  tag 674b4b5597193dc3  gpl
          loaded_at 2018-12-12T15:02:58+0000  uid 0
          xlated 240B  jited 257B  memlock 4096B  map_ids 294
          pinned /sys/fs/bpf/foo/xdp
  546: xdp  name bpf_func_process  tag e369a529024751fc  gpl
          loaded_at 2018-12-12T15:02:58+0000  uid 0
          xlated 200B  jited 164B  memlock 4096B
          pinned /sys/fs/bpf/foo/process
  547: xdp  name bpf_func_debug  tag 0b597868bc7f0976  gpl
          loaded_at 2018-12-12T15:02:58+0000  uid 0
          xlated 200B  jited 164B  memlock 4096B
          pinned /sys/fs/bpf/foo/debug

**# bpftool map**

::

  294: prog_array  name jmp_table  flags 0x0
          key 4B  value 4B  max_entries 1  memlock 4096B
          owner_prog_type xdp  owner jited

|
| **# bpftool map pin id 294 /sys/fs/bpf/bar**
| **# bpftool map dump pinned /sys/fs/bpf/bar**

::

  Found 0 elements

|
| **# bpftool map update pinned /sys/fs/bpf/bar key 0 0 0 0 value pinned /sys/fs/bpf/foo/debug**
| **# bpftool map dump pinned /sys/fs/bpf/bar**

::

  key: 00 00 00 00  value: 22 02 00 00
  Found 1 element

SEE ALSO
========
	**bpf**\ (2),
	**bpf-helpers**\ (7),
	**bpftool**\ (8),
	**bpftool-prog**\ (8),
	**bpftool-cgroup**\ (8),
	**bpftool-net**\ (8),
	**bpftool-perf**\ (8)