| /* |
| * linux/drivers/video/amifb.c -- Amiga builtin chipset frame buffer device |
| * |
| * Copyright (C) 1995-2003 Geert Uytterhoeven |
| * |
| * with work by Roman Zippel |
| * |
| * |
| * This file is based on the Atari frame buffer device (atafb.c): |
| * |
| * Copyright (C) 1994 Martin Schaller |
| * Roman Hodek |
| * |
| * with work by Andreas Schwab |
| * Guenther Kelleter |
| * |
| * and on the original Amiga console driver (amicon.c): |
| * |
| * Copyright (C) 1993 Hamish Macdonald |
| * Greg Harp |
| * Copyright (C) 1994 David Carter [carter@compsci.bristol.ac.uk] |
| * |
| * with work by William Rucklidge (wjr@cs.cornell.edu) |
| * Geert Uytterhoeven |
| * Jes Sorensen (jds@kom.auc.dk) |
| * |
| * |
| * History: |
| * |
| * - 24 Jul 96: Copper generates now vblank interrupt and |
| * VESA Power Saving Protocol is fully implemented |
| * - 14 Jul 96: Rework and hopefully last ECS bugs fixed |
| * - 7 Mar 96: Hardware sprite support by Roman Zippel |
| * - 18 Feb 96: OCS and ECS support by Roman Zippel |
| * Hardware functions completely rewritten |
| * - 2 Dec 95: AGA version by Geert Uytterhoeven |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file COPYING in the main directory of this archive |
| * for more details. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/string.h> |
| #include <linux/mm.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/fb.h> |
| #include <linux/init.h> |
| #include <linux/ioport.h> |
| #include <linux/platform_device.h> |
| #include <linux/uaccess.h> |
| |
| #include <asm/irq.h> |
| #include <asm/amigahw.h> |
| #include <asm/amigaints.h> |
| #include <asm/setup.h> |
| |
| #include "c2p.h" |
| |
| |
| #define DEBUG |
| |
| #if !defined(CONFIG_FB_AMIGA_OCS) && !defined(CONFIG_FB_AMIGA_ECS) && !defined(CONFIG_FB_AMIGA_AGA) |
| #define CONFIG_FB_AMIGA_OCS /* define at least one fb driver, this will change later */ |
| #endif |
| |
| #if !defined(CONFIG_FB_AMIGA_OCS) |
| # define IS_OCS (0) |
| #elif defined(CONFIG_FB_AMIGA_ECS) || defined(CONFIG_FB_AMIGA_AGA) |
| # define IS_OCS (chipset == TAG_OCS) |
| #else |
| # define CONFIG_FB_AMIGA_OCS_ONLY |
| # define IS_OCS (1) |
| #endif |
| |
| #if !defined(CONFIG_FB_AMIGA_ECS) |
| # define IS_ECS (0) |
| #elif defined(CONFIG_FB_AMIGA_OCS) || defined(CONFIG_FB_AMIGA_AGA) |
| # define IS_ECS (chipset == TAG_ECS) |
| #else |
| # define CONFIG_FB_AMIGA_ECS_ONLY |
| # define IS_ECS (1) |
| #endif |
| |
| #if !defined(CONFIG_FB_AMIGA_AGA) |
| # define IS_AGA (0) |
| #elif defined(CONFIG_FB_AMIGA_OCS) || defined(CONFIG_FB_AMIGA_ECS) |
| # define IS_AGA (chipset == TAG_AGA) |
| #else |
| # define CONFIG_FB_AMIGA_AGA_ONLY |
| # define IS_AGA (1) |
| #endif |
| |
| #ifdef DEBUG |
| # define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __func__ , ## args) |
| #else |
| # define DPRINTK(fmt, args...) |
| #endif |
| |
| /******************************************************************************* |
| |
| |
| Generic video timings |
| --------------------- |
| |
| Timings used by the frame buffer interface: |
| |
| +----------+---------------------------------------------+----------+-------+ |
| | | ^ | | | |
| | | |upper_margin | | | |
| | | v | | | |
| +----------###############################################----------+-------+ |
| | # ^ # | | |
| | # | # | | |
| | # | # | | |
| | # | # | | |
| | left # | # right | hsync | |
| | margin # | xres # margin | len | |
| |<-------->#<---------------+--------------------------->#<-------->|<----->| |
| | # | # | | |
| | # | # | | |
| | # | # | | |
| | # |yres # | | |
| | # | # | | |
| | # | # | | |
| | # | # | | |
| | # | # | | |
| | # | # | | |
| | # | # | | |
| | # | # | | |
| | # | # | | |
| | # v # | | |
| +----------###############################################----------+-------+ |
| | | ^ | | | |
| | | |lower_margin | | | |
| | | v | | | |
| +----------+---------------------------------------------+----------+-------+ |
| | | ^ | | | |
| | | |vsync_len | | | |
| | | v | | | |
| +----------+---------------------------------------------+----------+-------+ |
| |
| |
| Amiga video timings |
| ------------------- |
| |
| The Amiga native chipsets uses another timing scheme: |
| |
| - hsstrt: Start of horizontal synchronization pulse |
| - hsstop: End of horizontal synchronization pulse |
| - htotal: Last value on the line (i.e. line length = htotal + 1) |
| - vsstrt: Start of vertical synchronization pulse |
| - vsstop: End of vertical synchronization pulse |
| - vtotal: Last line value (i.e. number of lines = vtotal + 1) |
| - hcenter: Start of vertical retrace for interlace |
| |
| You can specify the blanking timings independently. Currently I just set |
| them equal to the respective synchronization values: |
| |
| - hbstrt: Start of horizontal blank |
| - hbstop: End of horizontal blank |
| - vbstrt: Start of vertical blank |
| - vbstop: End of vertical blank |
| |
| Horizontal values are in color clock cycles (280 ns), vertical values are in |
| scanlines. |
| |
| (0, 0) is somewhere in the upper-left corner :-) |
| |
| |
| Amiga visible window definitions |
| -------------------------------- |
| |
| Currently I only have values for AGA, SHRES (28 MHz dotclock). Feel free to |
| make corrections and/or additions. |
| |
| Within the above synchronization specifications, the visible window is |
| defined by the following parameters (actual register resolutions may be |
| different; all horizontal values are normalized with respect to the pixel |
| clock): |
| |
| - diwstrt_h: Horizontal start of the visible window |
| - diwstop_h: Horizontal stop + 1(*) of the visible window |
| - diwstrt_v: Vertical start of the visible window |
| - diwstop_v: Vertical stop of the visible window |
| - ddfstrt: Horizontal start of display DMA |
| - ddfstop: Horizontal stop of display DMA |
| - hscroll: Horizontal display output delay |
| |
| Sprite positioning: |
| |
| - sprstrt_h: Horizontal start - 4 of sprite |
| - sprstrt_v: Vertical start of sprite |
| |
| (*) Even Commodore did it wrong in the AGA monitor drivers by not adding 1. |
| |
| Horizontal values are in dotclock cycles (35 ns), vertical values are in |
| scanlines. |
| |
| (0, 0) is somewhere in the upper-left corner :-) |
| |
| |
| Dependencies (AGA, SHRES (35 ns dotclock)) |
| ------------------------------------------- |
| |
| Since there are much more parameters for the Amiga display than for the |
| frame buffer interface, there must be some dependencies among the Amiga |
| display parameters. Here's what I found out: |
| |
| - ddfstrt and ddfstop are best aligned to 64 pixels. |
| - the chipset needs 64 + 4 horizontal pixels after the DMA start before |
| the first pixel is output, so diwstrt_h = ddfstrt + 64 + 4 if you want |
| to display the first pixel on the line too. Increase diwstrt_h for |
| virtual screen panning. |
| - the display DMA always fetches 64 pixels at a time (fmode = 3). |
| - ddfstop is ddfstrt+#pixels - 64. |
| - diwstop_h = diwstrt_h + xres + 1. Because of the additional 1 this can |
| be 1 more than htotal. |
| - hscroll simply adds a delay to the display output. Smooth horizontal |
| panning needs an extra 64 pixels on the left to prefetch the pixels that |
| `fall off' on the left. |
| - if ddfstrt < 192, the sprite DMA cycles are all stolen by the bitplane |
| DMA, so it's best to make the DMA start as late as possible. |
| - you really don't want to make ddfstrt < 128, since this will steal DMA |
| cycles from the other DMA channels (audio, floppy and Chip RAM refresh). |
| - I make diwstop_h and diwstop_v as large as possible. |
| |
| General dependencies |
| -------------------- |
| |
| - all values are SHRES pixel (35ns) |
| |
| table 1:fetchstart table 2:prefetch table 3:fetchsize |
| ------------------ ---------------- ----------------- |
| Pixclock # SHRES|HIRES|LORES # SHRES|HIRES|LORES # SHRES|HIRES|LORES |
| -------------#------+-----+------#------+-----+------#------+-----+------ |
| Bus width 1x # 16 | 32 | 64 # 16 | 32 | 64 # 64 | 64 | 64 |
| Bus width 2x # 32 | 64 | 128 # 32 | 64 | 64 # 64 | 64 | 128 |
| Bus width 4x # 64 | 128 | 256 # 64 | 64 | 64 # 64 | 128 | 256 |
| |
| - chipset needs 4 pixels before the first pixel is output |
| - ddfstrt must be aligned to fetchstart (table 1) |
| - chipset needs also prefetch (table 2) to get first pixel data, so |
| ddfstrt = ((diwstrt_h - 4) & -fetchstart) - prefetch |
| - for horizontal panning decrease diwstrt_h |
| - the length of a fetchline must be aligned to fetchsize (table 3) |
| - if fetchstart is smaller than fetchsize, then ddfstrt can a little bit |
| moved to optimize use of dma (useful for OCS/ECS overscan displays) |
| - ddfstop is ddfstrt + ddfsize - fetchsize |
| - If C= didn't change anything for AGA, then at following positions the |
| dma bus is already used: |
| ddfstrt < 48 -> memory refresh |
| < 96 -> disk dma |
| < 160 -> audio dma |
| < 192 -> sprite 0 dma |
| < 416 -> sprite dma (32 per sprite) |
| - in accordance with the hardware reference manual a hardware stop is at |
| 192, but AGA (ECS?) can go below this. |
| |
| DMA priorities |
| -------------- |
| |
| Since there are limits on the earliest start value for display DMA and the |
| display of sprites, I use the following policy on horizontal panning and |
| the hardware cursor: |
| |
| - if you want to start display DMA too early, you lose the ability to |
| do smooth horizontal panning (xpanstep 1 -> 64). |
| - if you want to go even further, you lose the hardware cursor too. |
| |
| IMHO a hardware cursor is more important for X than horizontal scrolling, |
| so that's my motivation. |
| |
| |
| Implementation |
| -------------- |
| |
| ami_decode_var() converts the frame buffer values to the Amiga values. It's |
| just a `straightforward' implementation of the above rules. |
| |
| |
| Standard VGA timings |
| -------------------- |
| |
| xres yres left right upper lower hsync vsync |
| ---- ---- ---- ----- ----- ----- ----- ----- |
| 80x25 720 400 27 45 35 12 108 2 |
| 80x30 720 480 27 45 30 9 108 2 |
| |
| These were taken from a XFree86 configuration file, recalculated for a 28 MHz |
| dotclock (Amigas don't have a 25 MHz dotclock) and converted to frame buffer |
| generic timings. |
| |
| As a comparison, graphics/monitor.h suggests the following: |
| |
| xres yres left right upper lower hsync vsync |
| ---- ---- ---- ----- ----- ----- ----- ----- |
| |
| VGA 640 480 52 112 24 19 112 - 2 + |
| VGA70 640 400 52 112 27 21 112 - 2 - |
| |
| |
| Sync polarities |
| --------------- |
| |
| VSYNC HSYNC Vertical size Vertical total |
| ----- ----- ------------- -------------- |
| + + Reserved Reserved |
| + - 400 414 |
| - + 350 362 |
| - - 480 496 |
| |
| Source: CL-GD542X Technical Reference Manual, Cirrus Logic, Oct 1992 |
| |
| |
| Broadcast video timings |
| ----------------------- |
| |
| According to the CCIR and RETMA specifications, we have the following values: |
| |
| CCIR -> PAL |
| ----------- |
| |
| - a scanline is 64 µs long, of which 52.48 µs are visible. This is about |
| 736 visible 70 ns pixels per line. |
| - we have 625 scanlines, of which 575 are visible (interlaced); after |
| rounding this becomes 576. |
| |
| RETMA -> NTSC |
| ------------- |
| |
| - a scanline is 63.5 µs long, of which 53.5 µs are visible. This is about |
| 736 visible 70 ns pixels per line. |
| - we have 525 scanlines, of which 485 are visible (interlaced); after |
| rounding this becomes 484. |
| |
| Thus if you want a PAL compatible display, you have to do the following: |
| |
| - set the FB_SYNC_BROADCAST flag to indicate that standard broadcast |
| timings are to be used. |
| - make sure upper_margin + yres + lower_margin + vsync_len = 625 for an |
| interlaced, 312 for a non-interlaced and 156 for a doublescanned |
| display. |
| - make sure left_margin + xres + right_margin + hsync_len = 1816 for a |
| SHRES, 908 for a HIRES and 454 for a LORES display. |
| - the left visible part begins at 360 (SHRES; HIRES:180, LORES:90), |
| left_margin + 2 * hsync_len must be greater or equal. |
| - the upper visible part begins at 48 (interlaced; non-interlaced:24, |
| doublescanned:12), upper_margin + 2 * vsync_len must be greater or |
| equal. |
| - ami_encode_var() calculates margins with a hsync of 5320 ns and a vsync |
| of 4 scanlines |
| |
| The settings for a NTSC compatible display are straightforward. |
| |
| Note that in a strict sense the PAL and NTSC standards only define the |
| encoding of the color part (chrominance) of the video signal and don't say |
| anything about horizontal/vertical synchronization nor refresh rates. |
| |
| |
| -- Geert -- |
| |
| *******************************************************************************/ |
| |
| |
| /* |
| * Custom Chipset Definitions |
| */ |
| |
| #define CUSTOM_OFS(fld) ((long)&((struct CUSTOM*)0)->fld) |
| |
| /* |
| * BPLCON0 -- Bitplane Control Register 0 |
| */ |
| |
| #define BPC0_HIRES (0x8000) |
| #define BPC0_BPU2 (0x4000) /* Bit plane used count */ |
| #define BPC0_BPU1 (0x2000) |
| #define BPC0_BPU0 (0x1000) |
| #define BPC0_HAM (0x0800) /* HAM mode */ |
| #define BPC0_DPF (0x0400) /* Double playfield */ |
| #define BPC0_COLOR (0x0200) /* Enable colorburst */ |
| #define BPC0_GAUD (0x0100) /* Genlock audio enable */ |
| #define BPC0_UHRES (0x0080) /* Ultrahi res enable */ |
| #define BPC0_SHRES (0x0040) /* Super hi res mode */ |
| #define BPC0_BYPASS (0x0020) /* Bypass LUT - AGA */ |
| #define BPC0_BPU3 (0x0010) /* AGA */ |
| #define BPC0_LPEN (0x0008) /* Light pen enable */ |
| #define BPC0_LACE (0x0004) /* Interlace */ |
| #define BPC0_ERSY (0x0002) /* External resync */ |
| #define BPC0_ECSENA (0x0001) /* ECS enable */ |
| |
| /* |
| * BPLCON2 -- Bitplane Control Register 2 |
| */ |
| |
| #define BPC2_ZDBPSEL2 (0x4000) /* Bitplane to be used for ZD - AGA */ |
| #define BPC2_ZDBPSEL1 (0x2000) |
| #define BPC2_ZDBPSEL0 (0x1000) |
| #define BPC2_ZDBPEN (0x0800) /* Enable ZD with ZDBPSELx - AGA */ |
| #define BPC2_ZDCTEN (0x0400) /* Enable ZD with palette bit #31 - AGA */ |
| #define BPC2_KILLEHB (0x0200) /* Kill EHB mode - AGA */ |
| #define BPC2_RDRAM (0x0100) /* Color table accesses read, not write - AGA */ |
| #define BPC2_SOGEN (0x0080) /* SOG output pin high - AGA */ |
| #define BPC2_PF2PRI (0x0040) /* PF2 priority over PF1 */ |
| #define BPC2_PF2P2 (0x0020) /* PF2 priority wrt sprites */ |
| #define BPC2_PF2P1 (0x0010) |
| #define BPC2_PF2P0 (0x0008) |
| #define BPC2_PF1P2 (0x0004) /* ditto PF1 */ |
| #define BPC2_PF1P1 (0x0002) |
| #define BPC2_PF1P0 (0x0001) |
| |
| /* |
| * BPLCON3 -- Bitplane Control Register 3 (AGA) |
| */ |
| |
| #define BPC3_BANK2 (0x8000) /* Bits to select color register bank */ |
| #define BPC3_BANK1 (0x4000) |
| #define BPC3_BANK0 (0x2000) |
| #define BPC3_PF2OF2 (0x1000) /* Bits for color table offset when PF2 */ |
| #define BPC3_PF2OF1 (0x0800) |
| #define BPC3_PF2OF0 (0x0400) |
| #define BPC3_LOCT (0x0200) /* Color register writes go to low bits */ |
| #define BPC3_SPRES1 (0x0080) /* Sprite resolution bits */ |
| #define BPC3_SPRES0 (0x0040) |
| #define BPC3_BRDRBLNK (0x0020) /* Border blanked? */ |
| #define BPC3_BRDRTRAN (0x0010) /* Border transparent? */ |
| #define BPC3_ZDCLKEN (0x0004) /* ZD pin is 14 MHz (HIRES) clock output */ |
| #define BPC3_BRDRSPRT (0x0002) /* Sprites in border? */ |
| #define BPC3_EXTBLKEN (0x0001) /* BLANK programmable */ |
| |
| /* |
| * BPLCON4 -- Bitplane Control Register 4 (AGA) |
| */ |
| |
| #define BPC4_BPLAM7 (0x8000) /* bitplane color XOR field */ |
| #define BPC4_BPLAM6 (0x4000) |
| #define BPC4_BPLAM5 (0x2000) |
| #define BPC4_BPLAM4 (0x1000) |
| #define BPC4_BPLAM3 (0x0800) |
| #define BPC4_BPLAM2 (0x0400) |
| #define BPC4_BPLAM1 (0x0200) |
| #define BPC4_BPLAM0 (0x0100) |
| #define BPC4_ESPRM7 (0x0080) /* 4 high bits for even sprite colors */ |
| #define BPC4_ESPRM6 (0x0040) |
| #define BPC4_ESPRM5 (0x0020) |
| #define BPC4_ESPRM4 (0x0010) |
| #define BPC4_OSPRM7 (0x0008) /* 4 high bits for odd sprite colors */ |
| #define BPC4_OSPRM6 (0x0004) |
| #define BPC4_OSPRM5 (0x0002) |
| #define BPC4_OSPRM4 (0x0001) |
| |
| /* |
| * BEAMCON0 -- Beam Control Register |
| */ |
| |
| #define BMC0_HARDDIS (0x4000) /* Disable hardware limits */ |
| #define BMC0_LPENDIS (0x2000) /* Disable light pen latch */ |
| #define BMC0_VARVBEN (0x1000) /* Enable variable vertical blank */ |
| #define BMC0_LOLDIS (0x0800) /* Disable long/short line toggle */ |
| #define BMC0_CSCBEN (0x0400) /* Composite sync/blank */ |
| #define BMC0_VARVSYEN (0x0200) /* Enable variable vertical sync */ |
| #define BMC0_VARHSYEN (0x0100) /* Enable variable horizontal sync */ |
| #define BMC0_VARBEAMEN (0x0080) /* Enable variable beam counters */ |
| #define BMC0_DUAL (0x0040) /* Enable alternate horizontal beam counter */ |
| #define BMC0_PAL (0x0020) /* Set decodes for PAL */ |
| #define BMC0_VARCSYEN (0x0010) /* Enable variable composite sync */ |
| #define BMC0_BLANKEN (0x0008) /* Blank enable (no longer used on AGA) */ |
| #define BMC0_CSYTRUE (0x0004) /* CSY polarity */ |
| #define BMC0_VSYTRUE (0x0002) /* VSY polarity */ |
| #define BMC0_HSYTRUE (0x0001) /* HSY polarity */ |
| |
| |
| /* |
| * FMODE -- Fetch Mode Control Register (AGA) |
| */ |
| |
| #define FMODE_SSCAN2 (0x8000) /* Sprite scan-doubling */ |
| #define FMODE_BSCAN2 (0x4000) /* Use PF2 modulus every other line */ |
| #define FMODE_SPAGEM (0x0008) /* Sprite page mode */ |
| #define FMODE_SPR32 (0x0004) /* Sprite 32 bit fetch */ |
| #define FMODE_BPAGEM (0x0002) /* Bitplane page mode */ |
| #define FMODE_BPL32 (0x0001) /* Bitplane 32 bit fetch */ |
| |
| /* |
| * Tags used to indicate a specific Pixel Clock |
| * |
| * clk_shift is the shift value to get the timings in 35 ns units |
| */ |
| |
| enum { TAG_SHRES, TAG_HIRES, TAG_LORES }; |
| |
| /* |
| * Tags used to indicate the specific chipset |
| */ |
| |
| enum { TAG_OCS, TAG_ECS, TAG_AGA }; |
| |
| /* |
| * Tags used to indicate the memory bandwidth |
| */ |
| |
| enum { TAG_FMODE_1, TAG_FMODE_2, TAG_FMODE_4 }; |
| |
| |
| /* |
| * Clock Definitions, Maximum Display Depth |
| * |
| * These depend on the E-Clock or the Chipset, so they are filled in |
| * dynamically |
| */ |
| |
| static u_long pixclock[3]; /* SHRES/HIRES/LORES: index = clk_shift */ |
| static u_short maxdepth[3]; /* SHRES/HIRES/LORES: index = clk_shift */ |
| static u_short maxfmode, chipset; |
| |
| |
| /* |
| * Broadcast Video Timings |
| * |
| * Horizontal values are in 35 ns (SHRES) units |
| * Vertical values are in interlaced scanlines |
| */ |
| |
| #define PAL_DIWSTRT_H (360) /* PAL Window Limits */ |
| #define PAL_DIWSTRT_V (48) |
| #define PAL_HTOTAL (1816) |
| #define PAL_VTOTAL (625) |
| |
| #define NTSC_DIWSTRT_H (360) /* NTSC Window Limits */ |
| #define NTSC_DIWSTRT_V (40) |
| #define NTSC_HTOTAL (1816) |
| #define NTSC_VTOTAL (525) |
| |
| |
| /* |
| * Various macros |
| */ |
| |
| #define up2(v) (((v) + 1) & -2) |
| #define down2(v) ((v) & -2) |
| #define div2(v) ((v)>>1) |
| #define mod2(v) ((v) & 1) |
| |
| #define up4(v) (((v) + 3) & -4) |
| #define down4(v) ((v) & -4) |
| #define mul4(v) ((v) << 2) |
| #define div4(v) ((v)>>2) |
| #define mod4(v) ((v) & 3) |
| |
| #define up8(v) (((v) + 7) & -8) |
| #define down8(v) ((v) & -8) |
| #define div8(v) ((v)>>3) |
| #define mod8(v) ((v) & 7) |
| |
| #define up16(v) (((v) + 15) & -16) |
| #define down16(v) ((v) & -16) |
| #define div16(v) ((v)>>4) |
| #define mod16(v) ((v) & 15) |
| |
| #define up32(v) (((v) + 31) & -32) |
| #define down32(v) ((v) & -32) |
| #define div32(v) ((v)>>5) |
| #define mod32(v) ((v) & 31) |
| |
| #define up64(v) (((v) + 63) & -64) |
| #define down64(v) ((v) & -64) |
| #define div64(v) ((v)>>6) |
| #define mod64(v) ((v) & 63) |
| |
| #define upx(x, v) (((v) + (x) - 1) & -(x)) |
| #define downx(x, v) ((v) & -(x)) |
| #define modx(x, v) ((v) & ((x) - 1)) |
| |
| /* |
| * FIXME: Use C variants of the code marked with #ifdef __mc68000__ |
| * in the driver. It shouldn't negatively affect the performance and |
| * is required for APUS support (once it is re-added to the kernel). |
| * Needs to be tested on the hardware though.. |
| */ |
| /* if x1 is not a constant, this macro won't make real sense :-) */ |
| #ifdef __mc68000__ |
| #define DIVUL(x1, x2) ({int res; asm("divul %1,%2,%3": "=d" (res): \ |
| "d" (x2), "d" ((long)((x1) / 0x100000000ULL)), "0" ((long)(x1))); res;}) |
| #else |
| /* We know a bit about the numbers, so we can do it this way */ |
| #define DIVUL(x1, x2) ((((long)((unsigned long long)x1 >> 8) / x2) << 8) + \ |
| ((((long)((unsigned long long)x1 >> 8) % x2) << 8) / x2)) |
| #endif |
| |
| #define highw(x) ((u_long)(x)>>16 & 0xffff) |
| #define loww(x) ((u_long)(x) & 0xffff) |
| |
| #define custom amiga_custom |
| |
| #define VBlankOn() custom.intena = IF_SETCLR|IF_COPER |
| #define VBlankOff() custom.intena = IF_COPER |
| |
| |
| /* |
| * Chip RAM we reserve for the Frame Buffer |
| * |
| * This defines the Maximum Virtual Screen Size |
| * (Setable per kernel options?) |
| */ |
| |
| #define VIDEOMEMSIZE_AGA_2M (1310720) /* AGA (2MB) : max 1280*1024*256 */ |
| #define VIDEOMEMSIZE_AGA_1M (786432) /* AGA (1MB) : max 1024*768*256 */ |
| #define VIDEOMEMSIZE_ECS_2M (655360) /* ECS (2MB) : max 1280*1024*16 */ |
| #define VIDEOMEMSIZE_ECS_1M (393216) /* ECS (1MB) : max 1024*768*16 */ |
| #define VIDEOMEMSIZE_OCS (262144) /* OCS : max ca. 800*600*16 */ |
| |
| #define SPRITEMEMSIZE (64 * 64 / 4) /* max 64*64*4 */ |
| #define DUMMYSPRITEMEMSIZE (8) |
| static u_long spritememory; |
| |
| #define CHIPRAM_SAFETY_LIMIT (16384) |
| |
| static u_long videomemory; |
| |
| /* |
| * This is the earliest allowed start of fetching display data. |
| * Only if you really want no hardware cursor and audio, |
| * set this to 128, but let it better at 192 |
| */ |
| |
| static u_long min_fstrt = 192; |
| |
| #define assignchunk(name, type, ptr, size) \ |
| { \ |
| (name) = (type)(ptr); \ |
| ptr += size; \ |
| } |
| |
| |
| /* |
| * Copper Instructions |
| */ |
| |
| #define CMOVE(val, reg) (CUSTOM_OFS(reg) << 16 | (val)) |
| #define CMOVE2(val, reg) ((CUSTOM_OFS(reg) + 2) << 16 | (val)) |
| #define CWAIT(x, y) (((y) & 0x1fe) << 23 | ((x) & 0x7f0) << 13 | 0x0001fffe) |
| #define CEND (0xfffffffe) |
| |
| |
| typedef union { |
| u_long l; |
| u_short w[2]; |
| } copins; |
| |
| static struct copdisplay { |
| copins *init; |
| copins *wait; |
| copins *list[2][2]; |
| copins *rebuild[2]; |
| } copdisplay; |
| |
| static u_short currentcop = 0; |
| |
| /* |
| * Hardware Cursor API Definitions |
| * These used to be in linux/fb.h, but were preliminary and used by |
| * amifb only anyway |
| */ |
| |
| #define FBIOGET_FCURSORINFO 0x4607 |
| #define FBIOGET_VCURSORINFO 0x4608 |
| #define FBIOPUT_VCURSORINFO 0x4609 |
| #define FBIOGET_CURSORSTATE 0x460A |
| #define FBIOPUT_CURSORSTATE 0x460B |
| |
| |
| struct fb_fix_cursorinfo { |
| __u16 crsr_width; /* width and height of the cursor in */ |
| __u16 crsr_height; /* pixels (zero if no cursor) */ |
| __u16 crsr_xsize; /* cursor size in display pixels */ |
| __u16 crsr_ysize; |
| __u16 crsr_color1; /* colormap entry for cursor color1 */ |
| __u16 crsr_color2; /* colormap entry for cursor color2 */ |
| }; |
| |
| struct fb_var_cursorinfo { |
| __u16 width; |
| __u16 height; |
| __u16 xspot; |
| __u16 yspot; |
| DECLARE_FLEX_ARRAY(__u8, data); /* field with [height][width] */ |
| }; |
| |
| struct fb_cursorstate { |
| __s16 xoffset; |
| __s16 yoffset; |
| __u16 mode; |
| }; |
| |
| #define FB_CURSOR_OFF 0 |
| #define FB_CURSOR_ON 1 |
| #define FB_CURSOR_FLASH 2 |
| |
| |
| /* |
| * Hardware Cursor |
| */ |
| |
| static int cursorrate = 20; /* Number of frames/flash toggle */ |
| static u_short cursorstate = -1; |
| static u_short cursormode = FB_CURSOR_OFF; |
| |
| static u_short *lofsprite, *shfsprite, *dummysprite; |
| |
| /* |
| * Current Video Mode |
| */ |
| |
| struct amifb_par { |
| |
| /* General Values */ |
| |
| int xres; /* vmode */ |
| int yres; /* vmode */ |
| int vxres; /* vmode */ |
| int vyres; /* vmode */ |
| int xoffset; /* vmode */ |
| int yoffset; /* vmode */ |
| u_short bpp; /* vmode */ |
| u_short clk_shift; /* vmode */ |
| u_short line_shift; /* vmode */ |
| int vmode; /* vmode */ |
| u_short diwstrt_h; /* vmode */ |
| u_short diwstop_h; /* vmode */ |
| u_short diwstrt_v; /* vmode */ |
| u_short diwstop_v; /* vmode */ |
| u_long next_line; /* modulo for next line */ |
| u_long next_plane; /* modulo for next plane */ |
| |
| /* Cursor Values */ |
| |
| struct { |
| short crsr_x; /* movecursor */ |
| short crsr_y; /* movecursor */ |
| short spot_x; |
| short spot_y; |
| u_short height; |
| u_short width; |
| u_short fmode; |
| } crsr; |
| |
| /* OCS Hardware Registers */ |
| |
| u_long bplpt0; /* vmode, pan (Note: physical address) */ |
| u_long bplpt0wrap; /* vmode, pan (Note: physical address) */ |
| u_short ddfstrt; |
| u_short ddfstop; |
| u_short bpl1mod; |
| u_short bpl2mod; |
| u_short bplcon0; /* vmode */ |
| u_short bplcon1; /* vmode */ |
| u_short htotal; /* vmode */ |
| u_short vtotal; /* vmode */ |
| |
| /* Additional ECS Hardware Registers */ |
| |
| u_short bplcon3; /* vmode */ |
| u_short beamcon0; /* vmode */ |
| u_short hsstrt; /* vmode */ |
| u_short hsstop; /* vmode */ |
| u_short hbstrt; /* vmode */ |
| u_short hbstop; /* vmode */ |
| u_short vsstrt; /* vmode */ |
| u_short vsstop; /* vmode */ |
| u_short vbstrt; /* vmode */ |
| u_short vbstop; /* vmode */ |
| u_short hcenter; /* vmode */ |
| |
| /* Additional AGA Hardware Registers */ |
| |
| u_short fmode; /* vmode */ |
| }; |
| |
| |
| /* |
| * Saved color entry 0 so we can restore it when unblanking |
| */ |
| |
| static u_char red0, green0, blue0; |
| |
| |
| #if defined(CONFIG_FB_AMIGA_ECS) |
| static u_short ecs_palette[32]; |
| #endif |
| |
| |
| /* |
| * Latches for Display Changes during VBlank |
| */ |
| |
| static u_short do_vmode_full = 0; /* Change the Video Mode */ |
| static u_short do_vmode_pan = 0; /* Update the Video Mode */ |
| static short do_blank = 0; /* (Un)Blank the Screen (±1) */ |
| static u_short do_cursor = 0; /* Move the Cursor */ |
| |
| |
| /* |
| * Various Flags |
| */ |
| |
| static u_short is_blanked = 0; /* Screen is Blanked */ |
| static u_short is_lace = 0; /* Screen is laced */ |
| |
| /* |
| * Predefined Video Modes |
| * |
| */ |
| |
| static struct fb_videomode ami_modedb[] __initdata = { |
| |
| /* |
| * AmigaOS Video Modes |
| * |
| * If you change these, make sure to update DEFMODE_* as well! |
| */ |
| |
| { |
| /* 640x200, 15 kHz, 60 Hz (NTSC) */ |
| "ntsc", 60, 640, 200, TAG_HIRES, 106, 86, 44, 16, 76, 2, |
| FB_SYNC_BROADCAST, FB_VMODE_NONINTERLACED | FB_VMODE_YWRAP |
| }, { |
| /* 640x400, 15 kHz, 60 Hz interlaced (NTSC) */ |
| "ntsc-lace", 60, 640, 400, TAG_HIRES, 106, 86, 88, 33, 76, 4, |
| FB_SYNC_BROADCAST, FB_VMODE_INTERLACED | FB_VMODE_YWRAP |
| }, { |
| /* 640x256, 15 kHz, 50 Hz (PAL) */ |
| "pal", 50, 640, 256, TAG_HIRES, 106, 86, 40, 14, 76, 2, |
| FB_SYNC_BROADCAST, FB_VMODE_NONINTERLACED | FB_VMODE_YWRAP |
| }, { |
| /* 640x512, 15 kHz, 50 Hz interlaced (PAL) */ |
| "pal-lace", 50, 640, 512, TAG_HIRES, 106, 86, 80, 29, 76, 4, |
| FB_SYNC_BROADCAST, FB_VMODE_INTERLACED | FB_VMODE_YWRAP |
| }, { |
| /* 640x480, 29 kHz, 57 Hz */ |
| "multiscan", 57, 640, 480, TAG_SHRES, 96, 112, 29, 8, 72, 8, |
| 0, FB_VMODE_NONINTERLACED | FB_VMODE_YWRAP |
| }, { |
| /* 640x960, 29 kHz, 57 Hz interlaced */ |
| "multiscan-lace", 57, 640, 960, TAG_SHRES, 96, 112, 58, 16, 72, |
| 16, |
| 0, FB_VMODE_INTERLACED | FB_VMODE_YWRAP |
| }, { |
| /* 640x200, 15 kHz, 72 Hz */ |
| "euro36", 72, 640, 200, TAG_HIRES, 92, 124, 6, 6, 52, 5, |
| 0, FB_VMODE_NONINTERLACED | FB_VMODE_YWRAP |
| }, { |
| /* 640x400, 15 kHz, 72 Hz interlaced */ |
| "euro36-lace", 72, 640, 400, TAG_HIRES, 92, 124, 12, 12, 52, |
| 10, |
| 0, FB_VMODE_INTERLACED | FB_VMODE_YWRAP |
| }, { |
| /* 640x400, 29 kHz, 68 Hz */ |
| "euro72", 68, 640, 400, TAG_SHRES, 164, 92, 9, 9, 80, 8, |
| 0, FB_VMODE_NONINTERLACED | FB_VMODE_YWRAP |
| }, { |
| /* 640x800, 29 kHz, 68 Hz interlaced */ |
| "euro72-lace", 68, 640, 800, TAG_SHRES, 164, 92, 18, 18, 80, |
| 16, |
| 0, FB_VMODE_INTERLACED | FB_VMODE_YWRAP |
| }, { |
| /* 800x300, 23 kHz, 70 Hz */ |
| "super72", 70, 800, 300, TAG_SHRES, 212, 140, 10, 11, 80, 7, |
| 0, FB_VMODE_NONINTERLACED | FB_VMODE_YWRAP |
| }, { |
| /* 800x600, 23 kHz, 70 Hz interlaced */ |
| "super72-lace", 70, 800, 600, TAG_SHRES, 212, 140, 20, 22, 80, |
| 14, |
| 0, FB_VMODE_INTERLACED | FB_VMODE_YWRAP |
| }, { |
| /* 640x200, 27 kHz, 57 Hz doublescan */ |
| "dblntsc", 57, 640, 200, TAG_SHRES, 196, 124, 18, 17, 80, 4, |
| 0, FB_VMODE_DOUBLE | FB_VMODE_YWRAP |
| }, { |
| /* 640x400, 27 kHz, 57 Hz */ |
| "dblntsc-ff", 57, 640, 400, TAG_SHRES, 196, 124, 36, 35, 80, 7, |
| 0, FB_VMODE_NONINTERLACED | FB_VMODE_YWRAP |
| }, { |
| /* 640x800, 27 kHz, 57 Hz interlaced */ |
| "dblntsc-lace", 57, 640, 800, TAG_SHRES, 196, 124, 72, 70, 80, |
| 14, |
| 0, FB_VMODE_INTERLACED | FB_VMODE_YWRAP |
| }, { |
| /* 640x256, 27 kHz, 47 Hz doublescan */ |
| "dblpal", 47, 640, 256, TAG_SHRES, 196, 124, 14, 13, 80, 4, |
| 0, FB_VMODE_DOUBLE | FB_VMODE_YWRAP |
| }, { |
| /* 640x512, 27 kHz, 47 Hz */ |
| "dblpal-ff", 47, 640, 512, TAG_SHRES, 196, 124, 28, 27, 80, 7, |
| 0, FB_VMODE_NONINTERLACED | FB_VMODE_YWRAP |
| }, { |
| /* 640x1024, 27 kHz, 47 Hz interlaced */ |
| "dblpal-lace", 47, 640, 1024, TAG_SHRES, 196, 124, 56, 54, 80, |
| 14, |
| 0, FB_VMODE_INTERLACED | FB_VMODE_YWRAP |
| }, |
| |
| /* |
| * VGA Video Modes |
| */ |
| |
| { |
| /* 640x480, 31 kHz, 60 Hz (VGA) */ |
| "vga", 60, 640, 480, TAG_SHRES, 64, 96, 30, 9, 112, 2, |
| 0, FB_VMODE_NONINTERLACED | FB_VMODE_YWRAP |
| }, { |
| /* 640x400, 31 kHz, 70 Hz (VGA) */ |
| "vga70", 70, 640, 400, TAG_SHRES, 64, 96, 35, 12, 112, 2, |
| FB_SYNC_VERT_HIGH_ACT | FB_SYNC_COMP_HIGH_ACT, |
| FB_VMODE_NONINTERLACED | FB_VMODE_YWRAP |
| }, |
| |
| #if 0 |
| |
| /* |
| * A2024 video modes |
| * These modes don't work yet because there's no A2024 driver. |
| */ |
| |
| { |
| /* 1024x800, 10 Hz */ |
| "a2024-10", 10, 1024, 800, TAG_HIRES, 0, 0, 0, 0, 0, 0, |
| 0, FB_VMODE_NONINTERLACED | FB_VMODE_YWRAP |
| }, { |
| /* 1024x800, 15 Hz */ |
| "a2024-15", 15, 1024, 800, TAG_HIRES, 0, 0, 0, 0, 0, 0, |
| 0, FB_VMODE_NONINTERLACED | FB_VMODE_YWRAP |
| } |
| #endif |
| }; |
| |
| #define NUM_TOTAL_MODES ARRAY_SIZE(ami_modedb) |
| |
| static char *mode_option __initdata = NULL; |
| static int round_down_bpp = 1; /* for mode probing */ |
| |
| /* |
| * Some default modes |
| */ |
| |
| |
| #define DEFMODE_PAL 2 /* "pal" for PAL OCS/ECS */ |
| #define DEFMODE_NTSC 0 /* "ntsc" for NTSC OCS/ECS */ |
| #define DEFMODE_AMBER_PAL 3 /* "pal-lace" for flicker fixed PAL (A3000) */ |
| #define DEFMODE_AMBER_NTSC 1 /* "ntsc-lace" for flicker fixed NTSC (A3000) */ |
| #define DEFMODE_AGA 19 /* "vga70" for AGA */ |
| |
| |
| static int amifb_ilbm = 0; /* interleaved or normal bitplanes */ |
| |
| static u32 amifb_hfmin __initdata; /* monitor hfreq lower limit (Hz) */ |
| static u32 amifb_hfmax __initdata; /* monitor hfreq upper limit (Hz) */ |
| static u16 amifb_vfmin __initdata; /* monitor vfreq lower limit (Hz) */ |
| static u16 amifb_vfmax __initdata; /* monitor vfreq upper limit (Hz) */ |
| |
| |
| /* |
| * Macros for the conversion from real world values to hardware register |
| * values |
| * |
| * This helps us to keep our attention on the real stuff... |
| * |
| * Hardware limits for AGA: |
| * |
| * parameter min max step |
| * --------- --- ---- ---- |
| * diwstrt_h 0 2047 1 |
| * diwstrt_v 0 2047 1 |
| * diwstop_h 0 4095 1 |
| * diwstop_v 0 4095 1 |
| * |
| * ddfstrt 0 2032 16 |
| * ddfstop 0 2032 16 |
| * |
| * htotal 8 2048 8 |
| * hsstrt 0 2040 8 |
| * hsstop 0 2040 8 |
| * vtotal 1 4096 1 |
| * vsstrt 0 4095 1 |
| * vsstop 0 4095 1 |
| * hcenter 0 2040 8 |
| * |
| * hbstrt 0 2047 1 |
| * hbstop 0 2047 1 |
| * vbstrt 0 4095 1 |
| * vbstop 0 4095 1 |
| * |
| * Horizontal values are in 35 ns (SHRES) pixels |
| * Vertical values are in half scanlines |
| */ |
| |
| /* bplcon1 (smooth scrolling) */ |
| |
| #define hscroll2hw(hscroll) \ |
| (((hscroll) << 12 & 0x3000) | ((hscroll) << 8 & 0xc300) | \ |
| ((hscroll) << 4 & 0x0c00) | ((hscroll) << 2 & 0x00f0) | \ |
| ((hscroll)>>2 & 0x000f)) |
| |
| /* diwstrt/diwstop/diwhigh (visible display window) */ |
| |
| #define diwstrt2hw(diwstrt_h, diwstrt_v) \ |
| (((diwstrt_v) << 7 & 0xff00) | ((diwstrt_h)>>2 & 0x00ff)) |
| #define diwstop2hw(diwstop_h, diwstop_v) \ |
| (((diwstop_v) << 7 & 0xff00) | ((diwstop_h)>>2 & 0x00ff)) |
| #define diwhigh2hw(diwstrt_h, diwstrt_v, diwstop_h, diwstop_v) \ |
| (((diwstop_h) << 3 & 0x2000) | ((diwstop_h) << 11 & 0x1800) | \ |
| ((diwstop_v)>>1 & 0x0700) | ((diwstrt_h)>>5 & 0x0020) | \ |
| ((diwstrt_h) << 3 & 0x0018) | ((diwstrt_v)>>9 & 0x0007)) |
| |
| /* ddfstrt/ddfstop (display DMA) */ |
| |
| #define ddfstrt2hw(ddfstrt) div8(ddfstrt) |
| #define ddfstop2hw(ddfstop) div8(ddfstop) |
| |
| /* hsstrt/hsstop/htotal/vsstrt/vsstop/vtotal/hcenter (sync timings) */ |
| |
| #define hsstrt2hw(hsstrt) (div8(hsstrt)) |
| #define hsstop2hw(hsstop) (div8(hsstop)) |
| #define htotal2hw(htotal) (div8(htotal) - 1) |
| #define vsstrt2hw(vsstrt) (div2(vsstrt)) |
| #define vsstop2hw(vsstop) (div2(vsstop)) |
| #define vtotal2hw(vtotal) (div2(vtotal) - 1) |
| #define hcenter2hw(htotal) (div8(htotal)) |
| |
| /* hbstrt/hbstop/vbstrt/vbstop (blanking timings) */ |
| |
| #define hbstrt2hw(hbstrt) (((hbstrt) << 8 & 0x0700) | ((hbstrt)>>3 & 0x00ff)) |
| #define hbstop2hw(hbstop) (((hbstop) << 8 & 0x0700) | ((hbstop)>>3 & 0x00ff)) |
| #define vbstrt2hw(vbstrt) (div2(vbstrt)) |
| #define vbstop2hw(vbstop) (div2(vbstop)) |
| |
| /* colour */ |
| |
| #define rgb2hw8_high(red, green, blue) \ |
| (((red & 0xf0) << 4) | (green & 0xf0) | ((blue & 0xf0)>>4)) |
| #define rgb2hw8_low(red, green, blue) \ |
| (((red & 0x0f) << 8) | ((green & 0x0f) << 4) | (blue & 0x0f)) |
| #define rgb2hw4(red, green, blue) \ |
| (((red & 0xf0) << 4) | (green & 0xf0) | ((blue & 0xf0)>>4)) |
| #define rgb2hw2(red, green, blue) \ |
| (((red & 0xc0) << 4) | (green & 0xc0) | ((blue & 0xc0)>>4)) |
| |
| /* sprpos/sprctl (sprite positioning) */ |
| |
| #define spr2hw_pos(start_v, start_h) \ |
| (((start_v) << 7 & 0xff00) | ((start_h)>>3 & 0x00ff)) |
| #define spr2hw_ctl(start_v, start_h, stop_v) \ |
| (((stop_v) << 7 & 0xff00) | ((start_v)>>4 & 0x0040) | \ |
| ((stop_v)>>5 & 0x0020) | ((start_h) << 3 & 0x0018) | \ |
| ((start_v)>>7 & 0x0004) | ((stop_v)>>8 & 0x0002) | \ |
| ((start_h)>>2 & 0x0001)) |
| |
| /* get current vertical position of beam */ |
| #define get_vbpos() ((u_short)((*(u_long volatile *)&custom.vposr >> 7) & 0xffe)) |
| |
| /* |
| * Copper Initialisation List |
| */ |
| |
| #define COPINITSIZE (sizeof(copins) * 40) |
| |
| enum { |
| cip_bplcon0 |
| }; |
| |
| /* |
| * Long Frame/Short Frame Copper List |
| * Don't change the order, build_copper()/rebuild_copper() rely on this |
| */ |
| |
| #define COPLISTSIZE (sizeof(copins) * 64) |
| |
| enum { |
| cop_wait, cop_bplcon0, |
| cop_spr0ptrh, cop_spr0ptrl, |
| cop_diwstrt, cop_diwstop, |
| cop_diwhigh, |
| }; |
| |
| /* |
| * Pixel modes for Bitplanes and Sprites |
| */ |
| |
| static u_short bplpixmode[3] = { |
| BPC0_SHRES, /* 35 ns */ |
| BPC0_HIRES, /* 70 ns */ |
| 0 /* 140 ns */ |
| }; |
| |
| static u_short sprpixmode[3] = { |
| BPC3_SPRES1 | BPC3_SPRES0, /* 35 ns */ |
| BPC3_SPRES1, /* 70 ns */ |
| BPC3_SPRES0 /* 140 ns */ |
| }; |
| |
| /* |
| * Fetch modes for Bitplanes and Sprites |
| */ |
| |
| static u_short bplfetchmode[3] = { |
| 0, /* 1x */ |
| FMODE_BPL32, /* 2x */ |
| FMODE_BPAGEM | FMODE_BPL32 /* 4x */ |
| }; |
| |
| static u_short sprfetchmode[3] = { |
| 0, /* 1x */ |
| FMODE_SPR32, /* 2x */ |
| FMODE_SPAGEM | FMODE_SPR32 /* 4x */ |
| }; |
| |
| |
| /* --------------------------- Hardware routines --------------------------- */ |
| |
| /* |
| * Get the video params out of `var'. If a value doesn't fit, round |
| * it up, if it's too big, return -EINVAL. |
| */ |
| |
| static int ami_decode_var(struct fb_var_screeninfo *var, struct amifb_par *par, |
| const struct fb_info *info) |
| { |
| u_short clk_shift, line_shift; |
| u_long maxfetchstop, fstrt, fsize, fconst, xres_n, yres_n; |
| u_int htotal, vtotal; |
| |
| /* |
| * Find a matching Pixel Clock |
| */ |
| |
| for (clk_shift = TAG_SHRES; clk_shift <= TAG_LORES; clk_shift++) |
| if (var->pixclock <= pixclock[clk_shift]) |
| break; |
| if (clk_shift > TAG_LORES) { |
| DPRINTK("pixclock too high\n"); |
| return -EINVAL; |
| } |
| par->clk_shift = clk_shift; |
| |
| /* |
| * Check the Geometry Values |
| */ |
| |
| if ((par->xres = var->xres) < 64) |
| par->xres = 64; |
| if ((par->yres = var->yres) < 64) |
| par->yres = 64; |
| if ((par->vxres = var->xres_virtual) < par->xres) |
| par->vxres = par->xres; |
| if ((par->vyres = var->yres_virtual) < par->yres) |
| par->vyres = par->yres; |
| |
| par->bpp = var->bits_per_pixel; |
| if (!var->nonstd) { |
| if (par->bpp < 1) |
| par->bpp = 1; |
| if (par->bpp > maxdepth[clk_shift]) { |
| if (round_down_bpp && maxdepth[clk_shift]) |
| par->bpp = maxdepth[clk_shift]; |
| else { |
| DPRINTK("invalid bpp\n"); |
| return -EINVAL; |
| } |
| } |
| } else if (var->nonstd == FB_NONSTD_HAM) { |
| if (par->bpp < 6) |
| par->bpp = 6; |
| if (par->bpp != 6) { |
| if (par->bpp < 8) |
| par->bpp = 8; |
| if (par->bpp != 8 || !IS_AGA) { |
| DPRINTK("invalid bpp for ham mode\n"); |
| return -EINVAL; |
| } |
| } |
| } else { |
| DPRINTK("unknown nonstd mode\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * FB_VMODE_SMOOTH_XPAN will be cleared, if one of the following |
| * checks failed and smooth scrolling is not possible |
| */ |
| |
| par->vmode = var->vmode | FB_VMODE_SMOOTH_XPAN; |
| switch (par->vmode & FB_VMODE_MASK) { |
| case FB_VMODE_INTERLACED: |
| line_shift = 0; |
| break; |
| case FB_VMODE_NONINTERLACED: |
| line_shift = 1; |
| break; |
| case FB_VMODE_DOUBLE: |
| if (!IS_AGA) { |
| DPRINTK("double mode only possible with aga\n"); |
| return -EINVAL; |
| } |
| line_shift = 2; |
| break; |
| default: |
| DPRINTK("unknown video mode\n"); |
| return -EINVAL; |
| break; |
| } |
| par->line_shift = line_shift; |
| |
| /* |
| * Vertical and Horizontal Timings |
| */ |
| |
| xres_n = par->xres << clk_shift; |
| yres_n = par->yres << line_shift; |
| par->htotal = down8((var->left_margin + par->xres + var->right_margin + |
| var->hsync_len) << clk_shift); |
| par->vtotal = |
| down2(((var->upper_margin + par->yres + var->lower_margin + |
| var->vsync_len) << line_shift) + 1); |
| |
| if (IS_AGA) |
| par->bplcon3 = sprpixmode[clk_shift]; |
| else |
| par->bplcon3 = 0; |
| if (var->sync & FB_SYNC_BROADCAST) { |
| par->diwstop_h = par->htotal - |
| ((var->right_margin - var->hsync_len) << clk_shift); |
| if (IS_AGA) |
| par->diwstop_h += mod4(var->hsync_len); |
| else |
| par->diwstop_h = down4(par->diwstop_h); |
| |
| par->diwstrt_h = par->diwstop_h - xres_n; |
| par->diwstop_v = par->vtotal - |
| ((var->lower_margin - var->vsync_len) << line_shift); |
| par->diwstrt_v = par->diwstop_v - yres_n; |
| if (par->diwstop_h >= par->htotal + 8) { |
| DPRINTK("invalid diwstop_h\n"); |
| return -EINVAL; |
| } |
| if (par->diwstop_v > par->vtotal) { |
| DPRINTK("invalid diwstop_v\n"); |
| return -EINVAL; |
| } |
| |
| if (!IS_OCS) { |
| /* Initialize sync with some reasonable values for pwrsave */ |
| par->hsstrt = 160; |
| par->hsstop = 320; |
| par->vsstrt = 30; |
| par->vsstop = 34; |
| } else { |
| par->hsstrt = 0; |
| par->hsstop = 0; |
| par->vsstrt = 0; |
| par->vsstop = 0; |
| } |
| if (par->vtotal > (PAL_VTOTAL + NTSC_VTOTAL) / 2) { |
| /* PAL video mode */ |
| if (par->htotal != PAL_HTOTAL) { |
| DPRINTK("htotal invalid for pal\n"); |
| return -EINVAL; |
| } |
| if (par->diwstrt_h < PAL_DIWSTRT_H) { |
| DPRINTK("diwstrt_h too low for pal\n"); |
| return -EINVAL; |
| } |
| if (par->diwstrt_v < PAL_DIWSTRT_V) { |
| DPRINTK("diwstrt_v too low for pal\n"); |
| return -EINVAL; |
| } |
| htotal = PAL_HTOTAL>>clk_shift; |
| vtotal = PAL_VTOTAL>>1; |
| if (!IS_OCS) { |
| par->beamcon0 = BMC0_PAL; |
| par->bplcon3 |= BPC3_BRDRBLNK; |
| } else if (AMIGAHW_PRESENT(AGNUS_HR_PAL) || |
| AMIGAHW_PRESENT(AGNUS_HR_NTSC)) { |
| par->beamcon0 = BMC0_PAL; |
| par->hsstop = 1; |
| } else if (amiga_vblank != 50) { |
| DPRINTK("pal not supported by this chipset\n"); |
| return -EINVAL; |
| } |
| } else { |
| /* NTSC video mode |
| * In the AGA chipset seems to be hardware bug with BPC3_BRDRBLNK |
| * and NTSC activated, so than better let diwstop_h <= 1812 |
| */ |
| if (par->htotal != NTSC_HTOTAL) { |
| DPRINTK("htotal invalid for ntsc\n"); |
| return -EINVAL; |
| } |
| if (par->diwstrt_h < NTSC_DIWSTRT_H) { |
| DPRINTK("diwstrt_h too low for ntsc\n"); |
| return -EINVAL; |
| } |
| if (par->diwstrt_v < NTSC_DIWSTRT_V) { |
| DPRINTK("diwstrt_v too low for ntsc\n"); |
| return -EINVAL; |
| } |
| htotal = NTSC_HTOTAL>>clk_shift; |
| vtotal = NTSC_VTOTAL>>1; |
| if (!IS_OCS) { |
| par->beamcon0 = 0; |
| par->bplcon3 |= BPC3_BRDRBLNK; |
| } else if (AMIGAHW_PRESENT(AGNUS_HR_PAL) || |
| AMIGAHW_PRESENT(AGNUS_HR_NTSC)) { |
| par->beamcon0 = 0; |
| par->hsstop = 1; |
| } else if (amiga_vblank != 60) { |
| DPRINTK("ntsc not supported by this chipset\n"); |
| return -EINVAL; |
| } |
| } |
| if (IS_OCS) { |
| if (par->diwstrt_h >= 1024 || par->diwstop_h < 1024 || |
| par->diwstrt_v >= 512 || par->diwstop_v < 256) { |
| DPRINTK("invalid position for display on ocs\n"); |
| return -EINVAL; |
| } |
| } |
| } else if (!IS_OCS) { |
| /* Programmable video mode */ |
| par->hsstrt = var->right_margin << clk_shift; |
| par->hsstop = (var->right_margin + var->hsync_len) << clk_shift; |
| par->diwstop_h = par->htotal - mod8(par->hsstrt) + 8 - (1 << clk_shift); |
| if (!IS_AGA) |
| par->diwstop_h = down4(par->diwstop_h) - 16; |
| par->diwstrt_h = par->diwstop_h - xres_n; |
| par->hbstop = par->diwstrt_h + 4; |
| par->hbstrt = par->diwstop_h + 4; |
| if (par->hbstrt >= par->htotal + 8) |
| par->hbstrt -= par->htotal; |
| par->hcenter = par->hsstrt + (par->htotal >> 1); |
| par->vsstrt = var->lower_margin << line_shift; |
| par->vsstop = (var->lower_margin + var->vsync_len) << line_shift; |
| par->diwstop_v = par->vtotal; |
| if ((par->vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED) |
| par->diwstop_v -= 2; |
| par->diwstrt_v = par->diwstop_v - yres_n; |
| par->vbstop = par->diwstrt_v - 2; |
| par->vbstrt = par->diwstop_v - 2; |
| if (par->vtotal > 2048) { |
| DPRINTK("vtotal too high\n"); |
| return -EINVAL; |
| } |
| if (par->htotal > 2048) { |
| DPRINTK("htotal too high\n"); |
| return -EINVAL; |
| } |
| par->bplcon3 |= BPC3_EXTBLKEN; |
| par->beamcon0 = BMC0_HARDDIS | BMC0_VARVBEN | BMC0_LOLDIS | |
| BMC0_VARVSYEN | BMC0_VARHSYEN | BMC0_VARBEAMEN | |
| BMC0_PAL | BMC0_VARCSYEN; |
| if (var->sync & FB_SYNC_HOR_HIGH_ACT) |
| par->beamcon0 |= BMC0_HSYTRUE; |
| if (var->sync & FB_SYNC_VERT_HIGH_ACT) |
| par->beamcon0 |= BMC0_VSYTRUE; |
| if (var->sync & FB_SYNC_COMP_HIGH_ACT) |
| par->beamcon0 |= BMC0_CSYTRUE; |
| htotal = par->htotal>>clk_shift; |
| vtotal = par->vtotal>>1; |
| } else { |
| DPRINTK("only broadcast modes possible for ocs\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * Checking the DMA timing |
| */ |
| |
| fconst = 16 << maxfmode << clk_shift; |
| |
| /* |
| * smallest window start value without turn off other dma cycles |
| * than sprite1-7, unless you change min_fstrt |
| */ |
| |
| |
| fsize = ((maxfmode + clk_shift <= 1) ? fconst : 64); |
| fstrt = downx(fconst, par->diwstrt_h - 4) - fsize; |
| if (fstrt < min_fstrt) { |
| DPRINTK("fetch start too low\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * smallest window start value where smooth scrolling is possible |
| */ |
| |
| fstrt = downx(fconst, par->diwstrt_h - fconst + (1 << clk_shift) - 4) - |
| fsize; |
| if (fstrt < min_fstrt) |
| par->vmode &= ~FB_VMODE_SMOOTH_XPAN; |
| |
| maxfetchstop = down16(par->htotal - 80); |
| |
| fstrt = downx(fconst, par->diwstrt_h - 4) - 64 - fconst; |
| fsize = upx(fconst, xres_n + |
| modx(fconst, downx(1 << clk_shift, par->diwstrt_h - 4))); |
| if (fstrt + fsize > maxfetchstop) |
| par->vmode &= ~FB_VMODE_SMOOTH_XPAN; |
| |
| fsize = upx(fconst, xres_n); |
| if (fstrt + fsize > maxfetchstop) { |
| DPRINTK("fetch stop too high\n"); |
| return -EINVAL; |
| } |
| |
| if (maxfmode + clk_shift <= 1) { |
| fsize = up64(xres_n + fconst - 1); |
| if (min_fstrt + fsize - 64 > maxfetchstop) |
| par->vmode &= ~FB_VMODE_SMOOTH_XPAN; |
| |
| fsize = up64(xres_n); |
| if (min_fstrt + fsize - 64 > maxfetchstop) { |
| DPRINTK("fetch size too high\n"); |
| return -EINVAL; |
| } |
| |
| fsize -= 64; |
| } else |
| fsize -= fconst; |
| |
| /* |
| * Check if there is enough time to update the bitplane pointers for ywrap |
| */ |
| |
| if (par->htotal - fsize - 64 < par->bpp * 64) |
| par->vmode &= ~FB_VMODE_YWRAP; |
| |
| /* |
| * Bitplane calculations and check the Memory Requirements |
| */ |
| |
| if (amifb_ilbm) { |
| par->next_plane = div8(upx(16 << maxfmode, par->vxres)); |
| par->next_line = par->bpp * par->next_plane; |
| if (par->next_line * par->vyres > info->fix.smem_len) { |
| DPRINTK("too few video mem\n"); |
| return -EINVAL; |
| } |
| } else { |
| par->next_line = div8(upx(16 << maxfmode, par->vxres)); |
| par->next_plane = par->vyres * par->next_line; |
| if (par->next_plane * par->bpp > info->fix.smem_len) { |
| DPRINTK("too few video mem\n"); |
| return -EINVAL; |
| } |
| } |
| |
| /* |
| * Hardware Register Values |
| */ |
| |
| par->bplcon0 = BPC0_COLOR | bplpixmode[clk_shift]; |
| if (!IS_OCS) |
| par->bplcon0 |= BPC0_ECSENA; |
| if (par->bpp == 8) |
| par->bplcon0 |= BPC0_BPU3; |
| else |
| par->bplcon0 |= par->bpp << 12; |
| if (var->nonstd == FB_NONSTD_HAM) |
| par->bplcon0 |= BPC0_HAM; |
| if (var->sync & FB_SYNC_EXT) |
| par->bplcon0 |= BPC0_ERSY; |
| |
| if (IS_AGA) |
| par->fmode = bplfetchmode[maxfmode]; |
| |
| switch (par->vmode & FB_VMODE_MASK) { |
| case FB_VMODE_INTERLACED: |
| par->bplcon0 |= BPC0_LACE; |
| break; |
| case FB_VMODE_DOUBLE: |
| if (IS_AGA) |
| par->fmode |= FMODE_SSCAN2 | FMODE_BSCAN2; |
| break; |
| } |
| |
| if (!((par->vmode ^ var->vmode) & FB_VMODE_YWRAP)) { |
| par->xoffset = var->xoffset; |
| par->yoffset = var->yoffset; |
| if (par->vmode & FB_VMODE_YWRAP) { |
| if (par->yoffset >= par->vyres) |
| par->xoffset = par->yoffset = 0; |
| } else { |
| if (par->xoffset > upx(16 << maxfmode, par->vxres - par->xres) || |
| par->yoffset > par->vyres - par->yres) |
| par->xoffset = par->yoffset = 0; |
| } |
| } else |
| par->xoffset = par->yoffset = 0; |
| |
| par->crsr.crsr_x = par->crsr.crsr_y = 0; |
| par->crsr.spot_x = par->crsr.spot_y = 0; |
| par->crsr.height = par->crsr.width = 0; |
| |
| return 0; |
| } |
| |
| /* |
| * Fill the `var' structure based on the values in `par' and maybe |
| * other values read out of the hardware. |
| */ |
| |
| static void ami_encode_var(struct fb_var_screeninfo *var, |
| struct amifb_par *par) |
| { |
| u_short clk_shift, line_shift; |
| |
| memset(var, 0, sizeof(struct fb_var_screeninfo)); |
| |
| clk_shift = par->clk_shift; |
| line_shift = par->line_shift; |
| |
| var->xres = par->xres; |
| var->yres = par->yres; |
| var->xres_virtual = par->vxres; |
| var->yres_virtual = par->vyres; |
| var->xoffset = par->xoffset; |
| var->yoffset = par->yoffset; |
| |
| var->bits_per_pixel = par->bpp; |
| var->grayscale = 0; |
| |
| var->red.offset = 0; |
| var->red.msb_right = 0; |
| var->red.length = par->bpp; |
| if (par->bplcon0 & BPC0_HAM) |
| var->red.length -= 2; |
| var->blue = var->green = var->red; |
| var->transp.offset = 0; |
| var->transp.length = 0; |
| var->transp.msb_right = 0; |
| |
| if (par->bplcon0 & BPC0_HAM) |
| var->nonstd = FB_NONSTD_HAM; |
| else |
| var->nonstd = 0; |
| var->activate = 0; |
| |
| var->height = -1; |
| var->width = -1; |
| |
| var->pixclock = pixclock[clk_shift]; |
| |
| if (IS_AGA && par->fmode & FMODE_BSCAN2) |
| var->vmode = FB_VMODE_DOUBLE; |
| else if (par->bplcon0 & BPC0_LACE) |
| var->vmode = FB_VMODE_INTERLACED; |
| else |
| var->vmode = FB_VMODE_NONINTERLACED; |
| |
| if (!IS_OCS && par->beamcon0 & BMC0_VARBEAMEN) { |
| var->hsync_len = (par->hsstop - par->hsstrt)>>clk_shift; |
| var->right_margin = par->hsstrt>>clk_shift; |
| var->left_margin = (par->htotal>>clk_shift) - var->xres - var->right_margin - var->hsync_len; |
| var->vsync_len = (par->vsstop - par->vsstrt)>>line_shift; |
| var->lower_margin = par->vsstrt>>line_shift; |
| var->upper_margin = (par->vtotal>>line_shift) - var->yres - var->lower_margin - var->vsync_len; |
| var->sync = 0; |
| if (par->beamcon0 & BMC0_HSYTRUE) |
| var->sync |= FB_SYNC_HOR_HIGH_ACT; |
| if (par->beamcon0 & BMC0_VSYTRUE) |
| var->sync |= FB_SYNC_VERT_HIGH_ACT; |
| if (par->beamcon0 & BMC0_CSYTRUE) |
| var->sync |= FB_SYNC_COMP_HIGH_ACT; |
| } else { |
| var->sync = FB_SYNC_BROADCAST; |
| var->hsync_len = (152>>clk_shift) + mod4(par->diwstop_h); |
| var->right_margin = ((par->htotal - down4(par->diwstop_h))>>clk_shift) + var->hsync_len; |
| var->left_margin = (par->htotal>>clk_shift) - var->xres - var->right_margin - var->hsync_len; |
| var->vsync_len = 4>>line_shift; |
| var->lower_margin = ((par->vtotal - par->diwstop_v)>>line_shift) + var->vsync_len; |
| var->upper_margin = (((par->vtotal - 2)>>line_shift) + 1) - var->yres - |
| var->lower_margin - var->vsync_len; |
| } |
| |
| if (par->bplcon0 & BPC0_ERSY) |
| var->sync |= FB_SYNC_EXT; |
| if (par->vmode & FB_VMODE_YWRAP) |
| var->vmode |= FB_VMODE_YWRAP; |
| } |
| |
| |
| /* |
| * Update hardware |
| */ |
| |
| static void ami_update_par(struct fb_info *info) |
| { |
| struct amifb_par *par = info->par; |
| short clk_shift, vshift, fstrt, fsize, fstop, fconst, shift, move, mod; |
| |
| clk_shift = par->clk_shift; |
| |
| if (!(par->vmode & FB_VMODE_SMOOTH_XPAN)) |
| par->xoffset = upx(16 << maxfmode, par->xoffset); |
| |
| fconst = 16 << maxfmode << clk_shift; |
| vshift = modx(16 << maxfmode, par->xoffset); |
| fstrt = par->diwstrt_h - (vshift << clk_shift) - 4; |
| fsize = (par->xres + vshift) << clk_shift; |
| shift = modx(fconst, fstrt); |
| move = downx(2 << maxfmode, div8(par->xoffset)); |
| if (maxfmode + clk_shift > 1) { |
| fstrt = downx(fconst, fstrt) - 64; |
| fsize = upx(fconst, fsize); |
| fstop = fstrt + fsize - fconst; |
| } else { |
| mod = fstrt = downx(fconst, fstrt) - fconst; |
| fstop = fstrt + upx(fconst, fsize) - 64; |
| fsize = up64(fsize); |
| fstrt = fstop - fsize + 64; |
| if (fstrt < min_fstrt) { |
| fstop += min_fstrt - fstrt; |
| fstrt = min_fstrt; |
| } |
| move = move - div8((mod - fstrt)>>clk_shift); |
| } |
| mod = par->next_line - div8(fsize>>clk_shift); |
| par->ddfstrt = fstrt; |
| par->ddfstop = fstop; |
| par->bplcon1 = hscroll2hw(shift); |
| par->bpl2mod = mod; |
| if (par->bplcon0 & BPC0_LACE) |
| par->bpl2mod += par->next_line; |
| if (IS_AGA && (par->fmode & FMODE_BSCAN2)) |
| par->bpl1mod = -div8(fsize>>clk_shift); |
| else |
| par->bpl1mod = par->bpl2mod; |
| |
| if (par->yoffset) { |
| par->bplpt0 = info->fix.smem_start + |
| par->next_line * par->yoffset + move; |
| if (par->vmode & FB_VMODE_YWRAP) { |
| if (par->yoffset > par->vyres - par->yres) { |
| par->bplpt0wrap = info->fix.smem_start + move; |
| if (par->bplcon0 & BPC0_LACE && |
| mod2(par->diwstrt_v + par->vyres - |
| par->yoffset)) |
| par->bplpt0wrap += par->next_line; |
| } |
| } |
| } else |
| par->bplpt0 = info->fix.smem_start + move; |
| |
| if (par->bplcon0 & BPC0_LACE && mod2(par->diwstrt_v)) |
| par->bplpt0 += par->next_line; |
| } |
| |
| |
| /* |
| * Pan or Wrap the Display |
| * |
| * This call looks only at xoffset, yoffset and the FB_VMODE_YWRAP flag |
| * in `var'. |
| */ |
| |
| static void ami_pan_var(struct fb_var_screeninfo *var, struct fb_info *info) |
| { |
| struct amifb_par *par = info->par; |
| |
| par->xoffset = var->xoffset; |
| par->yoffset = var->yoffset; |
| if (var->vmode & FB_VMODE_YWRAP) |
| par->vmode |= FB_VMODE_YWRAP; |
| else |
| par->vmode &= ~FB_VMODE_YWRAP; |
| |
| do_vmode_pan = 0; |
| ami_update_par(info); |
| do_vmode_pan = 1; |
| } |
| |
| |
| static void ami_update_display(const struct amifb_par *par) |
| { |
| custom.bplcon1 = par->bplcon1; |
| custom.bpl1mod = par->bpl1mod; |
| custom.bpl2mod = par->bpl2mod; |
| custom.ddfstrt = ddfstrt2hw(par->ddfstrt); |
| custom.ddfstop = ddfstop2hw(par->ddfstop); |
| } |
| |
| /* |
| * Change the video mode (called by VBlank interrupt) |
| */ |
| |
| static void ami_init_display(const struct amifb_par *par) |
| { |
| int i; |
| |
| custom.bplcon0 = par->bplcon0 & ~BPC0_LACE; |
| custom.bplcon2 = (IS_OCS ? 0 : BPC2_KILLEHB) | BPC2_PF2P2 | BPC2_PF1P2; |
| if (!IS_OCS) { |
| custom.bplcon3 = par->bplcon3; |
| if (IS_AGA) |
| custom.bplcon4 = BPC4_ESPRM4 | BPC4_OSPRM4; |
| if (par->beamcon0 & BMC0_VARBEAMEN) { |
| custom.htotal = htotal2hw(par->htotal); |
| custom.hbstrt = hbstrt2hw(par->hbstrt); |
| custom.hbstop = hbstop2hw(par->hbstop); |
| custom.hsstrt = hsstrt2hw(par->hsstrt); |
| custom.hsstop = hsstop2hw(par->hsstop); |
| custom.hcenter = hcenter2hw(par->hcenter); |
| custom.vtotal = vtotal2hw(par->vtotal); |
| custom.vbstrt = vbstrt2hw(par->vbstrt); |
| custom.vbstop = vbstop2hw(par->vbstop); |
| custom.vsstrt = vsstrt2hw(par->vsstrt); |
| custom.vsstop = vsstop2hw(par->vsstop); |
| } |
| } |
| if (!IS_OCS || par->hsstop) |
| custom.beamcon0 = par->beamcon0; |
| if (IS_AGA) |
| custom.fmode = par->fmode; |
| |
| /* |
| * The minimum period for audio depends on htotal |
| */ |
| |
| amiga_audio_min_period = div16(par->htotal); |
| |
| is_lace = par->bplcon0 & BPC0_LACE ? 1 : 0; |
| #if 1 |
| if (is_lace) { |
| i = custom.vposr >> 15; |
| } else { |
| custom.vposw = custom.vposr | 0x8000; |
| i = 1; |
| } |
| #else |
| i = 1; |
| custom.vposw = custom.vposr | 0x8000; |
| #endif |
| custom.cop2lc = (u_short *)ZTWO_PADDR(copdisplay.list[currentcop][i]); |
| } |
| |
| /* |
| * (Un)Blank the screen (called by VBlank interrupt) |
| */ |
| |
| static void ami_do_blank(const struct amifb_par *par) |
| { |
| #if defined(CONFIG_FB_AMIGA_AGA) |
| u_short bplcon3 = par->bplcon3; |
| #endif |
| u_char red, green, blue; |
| |
| if (do_blank > 0) { |
| custom.dmacon = DMAF_RASTER | DMAF_SPRITE; |
| red = green = blue = 0; |
| if (!IS_OCS && do_blank > 1) { |
| switch (do_blank) { |
| case FB_BLANK_VSYNC_SUSPEND: |
| custom.hsstrt = hsstrt2hw(par->hsstrt); |
| custom.hsstop = hsstop2hw(par->hsstop); |
| custom.vsstrt = vsstrt2hw(par->vtotal + 4); |
| custom.vsstop = vsstop2hw(par->vtotal + 4); |
| break; |
| case FB_BLANK_HSYNC_SUSPEND: |
| custom.hsstrt = hsstrt2hw(par->htotal + 16); |
| custom.hsstop = hsstop2hw(par->htotal + 16); |
| custom.vsstrt = vsstrt2hw(par->vsstrt); |
| custom.vsstop = vsstrt2hw(par->vsstop); |
| break; |
| case FB_BLANK_POWERDOWN: |
| custom.hsstrt = hsstrt2hw(par->htotal + 16); |
| custom.hsstop = hsstop2hw(par->htotal + 16); |
| custom.vsstrt = vsstrt2hw(par->vtotal + 4); |
| custom.vsstop = vsstop2hw(par->vtotal + 4); |
| break; |
| } |
| if (!(par->beamcon0 & BMC0_VARBEAMEN)) { |
| custom.htotal = htotal2hw(par->htotal); |
| custom.vtotal = vtotal2hw(par->vtotal); |
| custom.beamcon0 = BMC0_HARDDIS | BMC0_VARBEAMEN | |
| BMC0_VARVSYEN | BMC0_VARHSYEN | BMC0_VARCSYEN; |
| } |
| } |
| } else { |
| custom.dmacon = DMAF_SETCLR | DMAF_RASTER | DMAF_SPRITE; |
| red = red0; |
| green = green0; |
| blue = blue0; |
| if (!IS_OCS) { |
| custom.hsstrt = hsstrt2hw(par->hsstrt); |
| custom.hsstop = hsstop2hw(par->hsstop); |
| custom.vsstrt = vsstrt2hw(par->vsstrt); |
| custom.vsstop = vsstop2hw(par->vsstop); |
| custom.beamcon0 = par->beamcon0; |
| } |
| } |
| #if defined(CONFIG_FB_AMIGA_AGA) |
| if (IS_AGA) { |
| custom.bplcon3 = bplcon3; |
| custom.color[0] = rgb2hw8_high(red, green, blue); |
| custom.bplcon3 = bplcon3 | BPC3_LOCT; |
| custom.color[0] = rgb2hw8_low(red, green, blue); |
| custom.bplcon3 = bplcon3; |
| } else |
| #endif |
| #if defined(CONFIG_FB_AMIGA_ECS) |
| if (par->bplcon0 & BPC0_SHRES) { |
| u_short color, mask; |
| int i; |
| |
| mask = 0x3333; |
| color = rgb2hw2(red, green, blue); |
| for (i = 12; i >= 0; i -= 4) |
| custom.color[i] = ecs_palette[i] = (ecs_palette[i] & mask) | color; |
| mask <<= 2; color >>= 2; |
| for (i = 3; i >= 0; i--) |
| custom.color[i] = ecs_palette[i] = (ecs_palette[i] & mask) | color; |
| } else |
| #endif |
| custom.color[0] = rgb2hw4(red, green, blue); |
| is_blanked = do_blank > 0 ? do_blank : 0; |
| } |
| |
| static int ami_get_fix_cursorinfo(struct fb_fix_cursorinfo *fix, |
| const struct amifb_par *par) |
| { |
| fix->crsr_width = fix->crsr_xsize = par->crsr.width; |
| fix->crsr_height = fix->crsr_ysize = par->crsr.height; |
| fix->crsr_color1 = 17; |
| fix->crsr_color2 = 18; |
| return 0; |
| } |
| |
| static int ami_get_var_cursorinfo(struct fb_var_cursorinfo *var, |
| u_char __user *data, |
| const struct amifb_par *par) |
| { |
| register u_short *lspr, *sspr; |
| #ifdef __mc68000__ |
| register u_long datawords asm ("d2"); |
| #else |
| register u_long datawords; |
| #endif |
| register short delta; |
| register u_char color; |
| short height, width, bits, words; |
| int size, alloc; |
| |
| size = par->crsr.height * par->crsr.width; |
| alloc = var->height * var->width; |
| var->height = par->crsr.height; |
| var->width = par->crsr.width; |
| var->xspot = par->crsr.spot_x; |
| var->yspot = par->crsr.spot_y; |
| if (size > var->height * var->width) |
| return -ENAMETOOLONG; |
| delta = 1 << par->crsr.fmode; |
| lspr = lofsprite + (delta << 1); |
| if (par->bplcon0 & BPC0_LACE) |
| sspr = shfsprite + (delta << 1); |
| else |
| sspr = NULL; |
| for (height = (short)var->height - 1; height >= 0; height--) { |
| bits = 0; words = delta; datawords = 0; |
| for (width = (short)var->width - 1; width >= 0; width--) { |
| if (bits == 0) { |
| bits = 16; --words; |
| #ifdef __mc68000__ |
| asm volatile ("movew %1@(%3:w:2),%0 ; swap %0 ; movew %1@+,%0" |
| : "=d" (datawords), "=a" (lspr) : "1" (lspr), "d" (delta)); |
| #else |
| datawords = (*(lspr + delta) << 16) | (*lspr++); |
| #endif |
| } |
| --bits; |
| #ifdef __mc68000__ |
| asm volatile ( |
| "clrb %0 ; swap %1 ; lslw #1,%1 ; roxlb #1,%0 ; " |
| "swap %1 ; lslw #1,%1 ; roxlb #1,%0" |
| : "=d" (color), "=d" (datawords) : "1" (datawords)); |
| #else |
| color = (((datawords >> 30) & 2) |
| | ((datawords >> 15) & 1)); |
| datawords <<= 1; |
| #endif |
| /* FIXME: check the return value + test the change */ |
| put_user(color, data++); |
| } |
| if (bits > 0) { |
| --words; ++lspr; |
| } |
| while (--words >= 0) |
| ++lspr; |
| #ifdef __mc68000__ |
| asm volatile ("lea %0@(%4:w:2),%0 ; tstl %1 ; jeq 1f ; exg %0,%1\n1:" |
| : "=a" (lspr), "=a" (sspr) : "0" (lspr), "1" (sspr), "d" (delta)); |
| #else |
| lspr += delta; |
| if (sspr) { |
| u_short *tmp = lspr; |
| lspr = sspr; |
| sspr = tmp; |
| } |
| #endif |
| } |
| return 0; |
| } |
| |
| static int ami_set_var_cursorinfo(struct fb_var_cursorinfo *var, |
| u_char __user *data, struct amifb_par *par) |
| { |
| register u_short *lspr, *sspr; |
| #ifdef __mc68000__ |
| register u_long datawords asm ("d2"); |
| #else |
| register u_long datawords; |
| #endif |
| register short delta; |
| u_short fmode; |
| short height, width, bits, words; |
| |
| if (!var->width) |
| return -EINVAL; |
| else if (var->width <= 16) |
| fmode = TAG_FMODE_1; |
| else if (var->width <= 32) |
| fmode = TAG_FMODE_2; |
| else if (var->width <= 64) |
| fmode = TAG_FMODE_4; |
| else |
| return -EINVAL; |
| if (fmode > maxfmode) |
| return -EINVAL; |
| if (!var->height) |
| return -EINVAL; |
| delta = 1 << fmode; |
| lofsprite = shfsprite = (u_short *)spritememory; |
| lspr = lofsprite + (delta << 1); |
| if (par->bplcon0 & BPC0_LACE) { |
| if (((var->height + 4) << fmode << 2) > SPRITEMEMSIZE) |
| return -EINVAL; |
| memset(lspr, 0, (var->height + 4) << fmode << 2); |
| shfsprite += ((var->height + 5)&-2) << fmode; |
| sspr = shfsprite + (delta << 1); |
| } else { |
| if (((var->height + 2) << fmode << 2) > SPRITEMEMSIZE) |
| return -EINVAL; |
| memset(lspr, 0, (var->height + 2) << fmode << 2); |
| sspr = NULL; |
| } |
| for (height = (short)var->height - 1; height >= 0; height--) { |
| bits = 16; words = delta; datawords = 0; |
| for (width = (short)var->width - 1; width >= 0; width--) { |
| unsigned long tdata = 0; |
| /* FIXME: check the return value + test the change */ |
| get_user(tdata, data); |
| data++; |
| #ifdef __mc68000__ |
| asm volatile ( |
| "lsrb #1,%2 ; roxlw #1,%0 ; swap %0 ; " |
| "lsrb #1,%2 ; roxlw #1,%0 ; swap %0" |
| : "=d" (datawords) |
| : "0" (datawords), "d" (tdata)); |
| #else |
| datawords = ((datawords << 1) & 0xfffefffe); |
| datawords |= tdata & 1; |
| datawords |= (tdata & 2) << (16 - 1); |
| #endif |
| if (--bits == 0) { |
| bits = 16; --words; |
| #ifdef __mc68000__ |
| asm volatile ("swap %2 ; movew %2,%0@(%3:w:2) ; swap %2 ; movew %2,%0@+" |
| : "=a" (lspr) : "0" (lspr), "d" (datawords), "d" (delta)); |
| #else |
| *(lspr + delta) = (u_short) (datawords >> 16); |
| *lspr++ = (u_short) (datawords & 0xffff); |
| #endif |
| } |
| } |
| if (bits < 16) { |
| --words; |
| #ifdef __mc68000__ |
| asm volatile ( |
| "swap %2 ; lslw %4,%2 ; movew %2,%0@(%3:w:2) ; " |
| "swap %2 ; lslw %4,%2 ; movew %2,%0@+" |
| : "=a" (lspr) : "0" (lspr), "d" (datawords), "d" (delta), "d" (bits)); |
| #else |
| *(lspr + delta) = (u_short) (datawords >> (16 + bits)); |
| *lspr++ = (u_short) ((datawords & 0x0000ffff) >> bits); |
| #endif |
| } |
| while (--words >= 0) { |
| #ifdef __mc68000__ |
| asm volatile ("moveql #0,%%d0 ; movew %%d0,%0@(%2:w:2) ; movew %%d0,%0@+" |
| : "=a" (lspr) : "0" (lspr), "d" (delta) : "d0"); |
| #else |
| *(lspr + delta) = 0; |
| *lspr++ = 0; |
| #endif |
| } |
| #ifdef __mc68000__ |
| asm volatile ("lea %0@(%4:w:2),%0 ; tstl %1 ; jeq 1f ; exg %0,%1\n1:" |
| : "=a" (lspr), "=a" (sspr) : "0" (lspr), "1" (sspr), "d" (delta)); |
| #else |
| lspr += delta; |
| if (sspr) { |
| u_short *tmp = lspr; |
| lspr = sspr; |
| sspr = tmp; |
| } |
| #endif |
| } |
| par->crsr.height = var->height; |
| par->crsr.width = var->width; |
| par->crsr.spot_x = var->xspot; |
| par->crsr.spot_y = var->yspot; |
| par->crsr.fmode = fmode; |
| if (IS_AGA) { |
| par->fmode &= ~(FMODE_SPAGEM | FMODE_SPR32); |
| par->fmode |= sprfetchmode[fmode]; |
| custom.fmode = par->fmode; |
| } |
| return 0; |
| } |
| |
| static int ami_get_cursorstate(struct fb_cursorstate *state, |
| const struct amifb_par *par) |
| { |
| state->xoffset = par->crsr.crsr_x; |
| state->yoffset = par->crsr.crsr_y; |
| state->mode = cursormode; |
| return 0; |
| } |
| |
| static int ami_set_cursorstate(struct fb_cursorstate *state, |
| struct amifb_par *par) |
| { |
| par->crsr.crsr_x = state->xoffset; |
| par->crsr.crsr_y = state->yoffset; |
| if ((cursormode = state->mode) == FB_CURSOR_OFF) |
| cursorstate = -1; |
| do_cursor = 1; |
| return 0; |
| } |
| |
| static void ami_set_sprite(const struct amifb_par *par) |
| { |
| copins *copl, *cops; |
| u_short hs, vs, ve; |
| u_long pl, ps; |
| short mx, my; |
| |
| cops = copdisplay.list[currentcop][0]; |
| copl = copdisplay.list[currentcop][1]; |
| ps = pl = ZTWO_PADDR(dummysprite); |
| mx = par->crsr.crsr_x - par->crsr.spot_x; |
| my = par->crsr.crsr_y - par->crsr.spot_y; |
| if (!(par->vmode & FB_VMODE_YWRAP)) { |
| mx -= par->xoffset; |
| my -= par->yoffset; |
| } |
| if (!is_blanked && cursorstate > 0 && par->crsr.height > 0 && |
| mx > -(short)par->crsr.width && mx < par->xres && |
| my > -(short)par->crsr.height && my < par->yres) { |
| pl = ZTWO_PADDR(lofsprite); |
| hs = par->diwstrt_h + (mx << par->clk_shift) - 4; |
| vs = par->diwstrt_v + (my << par->line_shift); |
| ve = vs + (par->crsr.height << par->line_shift); |
| if (par->bplcon0 & BPC0_LACE) { |
| ps = ZTWO_PADDR(shfsprite); |
| lofsprite[0] = spr2hw_pos(vs, hs); |
| shfsprite[0] = spr2hw_pos(vs + 1, hs); |
| if (mod2(vs)) { |
| lofsprite[1 << par->crsr.fmode] = spr2hw_ctl(vs, hs, ve); |
| shfsprite[1 << par->crsr.fmode] = spr2hw_ctl(vs + 1, hs, ve + 1); |
| swap(pl, ps); |
| } else { |
| lofsprite[1 << par->crsr.fmode] = spr2hw_ctl(vs, hs, ve + 1); |
| shfsprite[1 << par->crsr.fmode] = spr2hw_ctl(vs + 1, hs, ve); |
| } |
| } else { |
| lofsprite[0] = spr2hw_pos(vs, hs) | (IS_AGA && (par->fmode & FMODE_BSCAN2) ? 0x80 : 0); |
| lofsprite[1 << par->crsr.fmode] = spr2hw_ctl(vs, hs, ve); |
| } |
| } |
| copl[cop_spr0ptrh].w[1] = highw(pl); |
| copl[cop_spr0ptrl].w[1] = loww(pl); |
| if (par->bplcon0 & BPC0_LACE) { |
| cops[cop_spr0ptrh].w[1] = highw(ps); |
| cops[cop_spr0ptrl].w[1] = loww(ps); |
| } |
| } |
| |
| |
| /* |
| * Initialise the Copper Initialisation List |
| */ |
| |
| static void __init ami_init_copper(void) |
| { |
| copins *cop = copdisplay.init; |
| u_long p; |
| int i; |
| |
| if (!IS_OCS) { |
| (cop++)->l = CMOVE(BPC0_COLOR | BPC0_SHRES | BPC0_ECSENA, bplcon0); |
| (cop++)->l = CMOVE(0x0181, diwstrt); |
| (cop++)->l = CMOVE(0x0281, diwstop); |
| (cop++)->l = CMOVE(0x0000, diwhigh); |
| } else |
| (cop++)->l = CMOVE(BPC0_COLOR, bplcon0); |
| p = ZTWO_PADDR(dummysprite); |
| for (i = 0; i < 8; i++) { |
| (cop++)->l = CMOVE(0, spr[i].pos); |
| (cop++)->l = CMOVE(highw(p), sprpt[i]); |
| (cop++)->l = CMOVE2(loww(p), sprpt[i]); |
| } |
| |
| (cop++)->l = CMOVE(IF_SETCLR | IF_COPER, intreq); |
| copdisplay.wait = cop; |
| (cop++)->l = CEND; |
| (cop++)->l = CMOVE(0, copjmp2); |
| cop->l = CEND; |
| |
| custom.cop1lc = (u_short *)ZTWO_PADDR(copdisplay.init); |
| custom.copjmp1 = 0; |
| } |
| |
| static void ami_reinit_copper(const struct amifb_par *par) |
| { |
| copdisplay.init[cip_bplcon0].w[1] = ~(BPC0_BPU3 | BPC0_BPU2 | BPC0_BPU1 | BPC0_BPU0) & par->bplcon0; |
| copdisplay.wait->l = CWAIT(32, par->diwstrt_v - 4); |
| } |
| |
| |
| /* |
| * Rebuild the Copper List |
| * |
| * We only change the things that are not static |
| */ |
| |
| static void ami_rebuild_copper(const struct amifb_par *par) |
| { |
| copins *copl, *cops; |
| u_short line, h_end1, h_end2; |
| short i; |
| u_long p; |
| |
| if (IS_AGA && maxfmode + par->clk_shift == 0) |
| h_end1 = par->diwstrt_h - 64; |
| else |
| h_end1 = par->htotal - 32; |
| h_end2 = par->ddfstop + 64; |
| |
| ami_set_sprite(par); |
| |
| copl = copdisplay.rebuild[1]; |
| p = par->bplpt0; |
| if (par->vmode & FB_VMODE_YWRAP) { |
| if ((par->vyres - par->yoffset) != 1 || !mod2(par->diwstrt_v)) { |
| if (par->yoffset > par->vyres - par->yres) { |
| for (i = 0; i < (short)par->bpp; i++, p += par->next_plane) { |
| (copl++)->l = CMOVE(highw(p), bplpt[i]); |
| (copl++)->l = CMOVE2(loww(p), bplpt[i]); |
| } |
| line = par->diwstrt_v + ((par->vyres - par->yoffset) << par->line_shift) - 1; |
| while (line >= 512) { |
| (copl++)->l = CWAIT(h_end1, 510); |
| line -= 512; |
| } |
| if (line >= 510 && IS_AGA && maxfmode + par->clk_shift == 0) |
| (copl++)->l = CWAIT(h_end1, line); |
| else |
| (copl++)->l = CWAIT(h_end2, line); |
| p = par->bplpt0wrap; |
| } |
| } else |
| p = par->bplpt0wrap; |
| } |
| for (i = 0; i < (short)par->bpp; i++, p += par->next_plane) { |
| (copl++)->l = CMOVE(highw(p), bplpt[i]); |
| (copl++)->l = CMOVE2(loww(p), bplpt[i]); |
| } |
| copl->l = CEND; |
| |
| if (par->bplcon0 & BPC0_LACE) { |
| cops = copdisplay.rebuild[0]; |
| p = par->bplpt0; |
| if (mod2(par->diwstrt_v)) |
| p -= par->next_line; |
| else |
| p += par->next_line; |
| if (par->vmode & FB_VMODE_YWRAP) { |
| if ((par->vyres - par->yoffset) != 1 || mod2(par->diwstrt_v)) { |
| if (par->yoffset > par->vyres - par->yres + 1) { |
| for (i = 0; i < (short)par->bpp; i++, p += par->next_plane) { |
| (cops++)->l = CMOVE(highw(p), bplpt[i]); |
| (cops++)->l = CMOVE2(loww(p), bplpt[i]); |
| } |
| line = par->diwstrt_v + ((par->vyres - par->yoffset) << par->line_shift) - 2; |
| while (line >= 512) { |
| (cops++)->l = CWAIT(h_end1, 510); |
| line -= 512; |
| } |
| if (line > 510 && IS_AGA && maxfmode + par->clk_shift == 0) |
| (cops++)->l = CWAIT(h_end1, line); |
| else |
| (cops++)->l = CWAIT(h_end2, line); |
| p = par->bplpt0wrap; |
| if (mod2(par->diwstrt_v + par->vyres - |
| par->yoffset)) |
| p -= par->next_line; |
| else |
| p += par->next_line; |
| } |
| } else |
| p = par->bplpt0wrap - par->next_line; |
| } |
| for (i = 0; i < (short)par->bpp; i++, p += par->next_plane) { |
| (cops++)->l = CMOVE(highw(p), bplpt[i]); |
| (cops++)->l = CMOVE2(loww(p), bplpt[i]); |
| } |
| cops->l = CEND; |
| } |
| } |
| |
| |
| /* |
| * Build the Copper List |
| */ |
| |
| static void ami_build_copper(struct fb_info *info) |
| { |
| struct amifb_par *par = info->par; |
| copins *copl, *cops; |
| u_long p; |
| |
| currentcop = 1 - currentcop; |
| |
| copl = copdisplay.list[currentcop][1]; |
| |
| (copl++)->l = CWAIT(0, 10); |
| (copl++)->l = CMOVE(par->bplcon0, bplcon0); |
| (copl++)->l = CMOVE(0, sprpt[0]); |
| (copl++)->l = CMOVE2(0, sprpt[0]); |
| |
| if (par->bplcon0 & BPC0_LACE) { |
| cops = copdisplay.list[currentcop][0]; |
| |
| (cops++)->l = CWAIT(0, 10); |
| (cops++)->l = CMOVE(par->bplcon0, bplcon0); |
| (cops++)->l = CMOVE(0, sprpt[0]); |
| (cops++)->l = CMOVE2(0, sprpt[0]); |
| |
| (copl++)->l = CMOVE(diwstrt2hw(par->diwstrt_h, par->diwstrt_v + 1), diwstrt); |
| (copl++)->l = CMOVE(diwstop2hw(par->diwstop_h, par->diwstop_v + 1), diwstop); |
| (cops++)->l = CMOVE(diwstrt2hw(par->diwstrt_h, par->diwstrt_v), diwstrt); |
| (cops++)->l = CMOVE(diwstop2hw(par->diwstop_h, par->diwstop_v), diwstop); |
| if (!IS_OCS) { |
| (copl++)->l = CMOVE(diwhigh2hw(par->diwstrt_h, par->diwstrt_v + 1, |
| par->diwstop_h, par->diwstop_v + 1), diwhigh); |
| (cops++)->l = CMOVE(diwhigh2hw(par->diwstrt_h, par->diwstrt_v, |
| par->diwstop_h, par->diwstop_v), diwhigh); |
| #if 0 |
| if (par->beamcon0 & BMC0_VARBEAMEN) { |
| (copl++)->l = CMOVE(vtotal2hw(par->vtotal), vtotal); |
| (copl++)->l = CMOVE(vbstrt2hw(par->vbstrt + 1), vbstrt); |
| (copl++)->l = CMOVE(vbstop2hw(par->vbstop + 1), vbstop); |
| (cops++)->l = CMOVE(vtotal2hw(par->vtotal), vtotal); |
| (cops++)->l = CMOVE(vbstrt2hw(par->vbstrt), vbstrt); |
| (cops++)->l = CMOVE(vbstop2hw(par->vbstop), vbstop); |
| } |
| #endif |
| } |
| p = ZTWO_PADDR(copdisplay.list[currentcop][0]); |
| (copl++)->l = CMOVE(highw(p), cop2lc); |
| (copl++)->l = CMOVE2(loww(p), cop2lc); |
| p = ZTWO_PADDR(copdisplay.list[currentcop][1]); |
| (cops++)->l = CMOVE(highw(p), cop2lc); |
| (cops++)->l = CMOVE2(loww(p), cop2lc); |
| copdisplay.rebuild[0] = cops; |
| } else { |
| (copl++)->l = CMOVE(diwstrt2hw(par->diwstrt_h, par->diwstrt_v), diwstrt); |
| (copl++)->l = CMOVE(diwstop2hw(par->diwstop_h, par->diwstop_v), diwstop); |
| if (!IS_OCS) { |
| (copl++)->l = CMOVE(diwhigh2hw(par->diwstrt_h, par->diwstrt_v, |
| par->diwstop_h, par->diwstop_v), diwhigh); |
| #if 0 |
| if (par->beamcon0 & BMC0_VARBEAMEN) { |
| (copl++)->l = CMOVE(vtotal2hw(par->vtotal), vtotal); |
| (copl++)->l = CMOVE(vbstrt2hw(par->vbstrt), vbstrt); |
| (copl++)->l = CMOVE(vbstop2hw(par->vbstop), vbstop); |
| } |
| #endif |
| } |
| } |
| copdisplay.rebuild[1] = copl; |
| |
| ami_update_par(info); |
| ami_rebuild_copper(info->par); |
| } |
| |
| #ifndef MODULE |
| static void __init amifb_setup_mcap(char *spec) |
| { |
| char *p; |
| int vmin, vmax, hmin, hmax; |
| |
| /* Format for monitor capabilities is: <Vmin>;<Vmax>;<Hmin>;<Hmax> |
| * <V*> vertical freq. in Hz |
| * <H*> horizontal freq. in kHz |
| */ |
| |
| if (!(p = strsep(&spec, ";")) || !*p) |
| return; |
| vmin = simple_strtoul(p, NULL, 10); |
| if (vmin <= 0) |
| return; |
| if (!(p = strsep(&spec, ";")) || !*p) |
| return; |
| vmax = simple_strtoul(p, NULL, 10); |
| if (vmax <= 0 || vmax <= vmin) |
| return; |
| if (!(p = strsep(&spec, ";")) || !*p) |
| return; |
| hmin = 1000 * simple_strtoul(p, NULL, 10); |
| if (hmin <= 0) |
| return; |
| if (!(p = strsep(&spec, "")) || !*p) |
| return; |
| hmax = 1000 * simple_strtoul(p, NULL, 10); |
| if (hmax <= 0 || hmax <= hmin) |
| return; |
| |
| amifb_hfmin = hmin; |
| amifb_hfmax = hmax; |
| amifb_vfmin = vmin; |
| amifb_vfmax = vmax; |
| } |
| |
| static int __init amifb_setup(char *options) |
| { |
| char *this_opt; |
| |
| if (!options || !*options) |
| return 0; |
| |
| while ((this_opt = strsep(&options, ",")) != NULL) { |
| if (!*this_opt) |
| continue; |
| if (!strcmp(this_opt, "inverse")) { |
| fb_invert_cmaps(); |
| } else if (!strcmp(this_opt, "ilbm")) |
| amifb_ilbm = 1; |
| else if (!strncmp(this_opt, "monitorcap:", 11)) |
| amifb_setup_mcap(this_opt + 11); |
| else if (!strncmp(this_opt, "fstart:", 7)) |
| min_fstrt = simple_strtoul(this_opt + 7, NULL, 0); |
| else |
| mode_option = this_opt; |
| } |
| |
| if (min_fstrt < 48) |
| min_fstrt = 48; |
| |
| return 0; |
| } |
| #endif |
| |
| static int amifb_check_var(struct fb_var_screeninfo *var, |
| struct fb_info *info) |
| { |
| int err; |
| struct amifb_par par; |
| |
| /* Validate wanted screen parameters */ |
| err = ami_decode_var(var, &par, info); |
| if (err) |
| return err; |
| |
| /* Encode (possibly rounded) screen parameters */ |
| ami_encode_var(var, &par); |
| return 0; |
| } |
| |
| |
| static int amifb_set_par(struct fb_info *info) |
| { |
| struct amifb_par *par = info->par; |
| int error; |
| |
| do_vmode_pan = 0; |
| do_vmode_full = 0; |
| |
| /* Decode wanted screen parameters */ |
| error = ami_decode_var(&info->var, par, info); |
| if (error) |
| return error; |
| |
| /* Set new videomode */ |
| ami_build_copper(info); |
| |
| /* Set VBlank trigger */ |
| do_vmode_full = 1; |
| |
| /* Update fix for new screen parameters */ |
| if (par->bpp == 1) { |
| info->fix.type = FB_TYPE_PACKED_PIXELS; |
| info->fix.type_aux = 0; |
| } else if (amifb_ilbm) { |
| info->fix.type = FB_TYPE_INTERLEAVED_PLANES; |
| info->fix.type_aux = par->next_line; |
| } else { |
| info->fix.type = FB_TYPE_PLANES; |
| info->fix.type_aux = 0; |
| } |
| info->fix.line_length = div8(upx(16 << maxfmode, par->vxres)); |
| |
| if (par->vmode & FB_VMODE_YWRAP) { |
| info->fix.ywrapstep = 1; |
| info->fix.xpanstep = 0; |
| info->fix.ypanstep = 0; |
| info->flags = FBINFO_HWACCEL_YWRAP | |
| FBINFO_READS_FAST; /* override SCROLL_REDRAW */ |
| } else { |
| info->fix.ywrapstep = 0; |
| if (par->vmode & FB_VMODE_SMOOTH_XPAN) |
| info->fix.xpanstep = 1; |
| else |
| info->fix.xpanstep = 16 << maxfmode; |
| info->fix.ypanstep = 1; |
| info->flags = FBINFO_HWACCEL_YPAN; |
| } |
| return 0; |
| } |
| |
| |
| /* |
| * Set a single color register. The values supplied are already |
| * rounded down to the hardware's capabilities (according to the |
| * entries in the var structure). Return != 0 for invalid regno. |
| */ |
| |
| static int amifb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, |
| u_int transp, struct fb_info *info) |
| { |
| const struct amifb_par *par = info->par; |
| |
| if (IS_AGA) { |
| if (regno > 255) |
| return 1; |
| } else if (par->bplcon0 & BPC0_SHRES) { |
| if (regno > 3) |
| return 1; |
| } else { |
| if (regno > 31) |
| return 1; |
| } |
| red >>= 8; |
| green >>= 8; |
| blue >>= 8; |
| if (!regno) { |
| red0 = red; |
| green0 = green; |
| blue0 = blue; |
| } |
| |
| /* |
| * Update the corresponding Hardware Color Register, unless it's Color |
| * Register 0 and the screen is blanked. |
| * |
| * VBlank is switched off to protect bplcon3 or ecs_palette[] from |
| * being changed by ami_do_blank() during the VBlank. |
| */ |
| |
| if (regno || !is_blanked) { |
| #if defined(CONFIG_FB_AMIGA_AGA) |
| if (IS_AGA) { |
| u_short bplcon3 = par->bplcon3; |
| VBlankOff(); |
| custom.bplcon3 = bplcon3 | (regno << 8 & 0xe000); |
| custom.color[regno & 31] = rgb2hw8_high(red, green, |
| blue); |
| custom.bplcon3 = bplcon3 | (regno << 8 & 0xe000) | |
| BPC3_LOCT; |
| custom.color[regno & 31] = rgb2hw8_low(red, green, |
| blue); |
| custom.bplcon3 = bplcon3; |
| VBlankOn(); |
| } else |
| #endif |
| #if defined(CONFIG_FB_AMIGA_ECS) |
| if (par->bplcon0 & BPC0_SHRES) { |
| u_short color, mask; |
| int i; |
| |
| mask = 0x3333; |
| color = rgb2hw2(red, green, blue); |
| VBlankOff(); |
| for (i = regno + 12; i >= (int)regno; i -= 4) |
| custom.color[i] = ecs_palette[i] = (ecs_palette[i] & mask) | color; |
| mask <<= 2; color >>= 2; |
| regno = down16(regno) + mul4(mod4(regno)); |
| for (i = regno + 3; i >= (int)regno; i--) |
| custom.color[i] = ecs_palette[i] = (ecs_palette[i] & mask) | color; |
| VBlankOn(); |
| } else |
| #endif |
| custom.color[regno] = rgb2hw4(red, green, blue); |
| } |
| return 0; |
| } |
| |
| |
| /* |
| * Blank the display. |
| */ |
| |
| static int amifb_blank(int blank, struct fb_info *info) |
| { |
| do_blank = blank ? blank : -1; |
| |
| return 0; |
| } |
| |
| |
| /* |
| * Pan or Wrap the Display |
| * |
| * This call looks only at xoffset, yoffset and the FB_VMODE_YWRAP flag |
| */ |
| |
| static int amifb_pan_display(struct fb_var_screeninfo *var, |
| struct fb_info *info) |
| { |
| if (!(var->vmode & FB_VMODE_YWRAP)) { |
| /* |
| * TODO: There will be problems when xpan!=1, so some columns |
| * on the right side will never be seen |
| */ |
| if (var->xoffset + info->var.xres > |
| upx(16 << maxfmode, info->var.xres_virtual)) |
| return -EINVAL; |
| } |
| ami_pan_var(var, info); |
| return 0; |
| } |
| |
| |
| #if BITS_PER_LONG == 32 |
| #define BYTES_PER_LONG 4 |
| #define SHIFT_PER_LONG 5 |
| #elif BITS_PER_LONG == 64 |
| #define BYTES_PER_LONG 8 |
| #define SHIFT_PER_LONG 6 |
| #else |
| #define Please update me |
| #endif |
| |
| |
| /* |
| * Compose two values, using a bitmask as decision value |
| * This is equivalent to (a & mask) | (b & ~mask) |
| */ |
| |
| static inline unsigned long comp(unsigned long a, unsigned long b, |
| unsigned long mask) |
| { |
| return ((a ^ b) & mask) ^ b; |
| } |
| |
| |
| static inline unsigned long xor(unsigned long a, unsigned long b, |
| unsigned long mask) |
| { |
| return (a & mask) ^ b; |
| } |
| |
| |
| /* |
| * Unaligned forward bit copy using 32-bit or 64-bit memory accesses |
| */ |
| |
| static void bitcpy(unsigned long *dst, int dst_idx, const unsigned long *src, |
| int src_idx, u32 n) |
| { |
| unsigned long first, last; |
| int shift = dst_idx - src_idx, left, right; |
| unsigned long d0, d1; |
| int m; |
| |
| if (!n) |
| return; |
| |
| shift = dst_idx - src_idx; |
| first = ~0UL >> dst_idx; |
| last = ~(~0UL >> ((dst_idx + n) % BITS_PER_LONG)); |
| |
| if (!shift) { |
| // Same alignment for source and dest |
| |
| if (dst_idx + n <= BITS_PER_LONG) { |
| // Single word |
| if (last) |
| first &= last; |
| *dst = comp(*src, *dst, first); |
| } else { |
| // Multiple destination words |
| // Leading bits |
| if (first) { |
| *dst = comp(*src, *dst, first); |
| dst++; |
| src++; |
| n -= BITS_PER_LONG - dst_idx; |
| } |
| |
| // Main chunk |
| n /= BITS_PER_LONG; |
| while (n >= 8) { |
| *dst++ = *src++; |
| *dst++ = *src++; |
| *dst++ = *src++; |
| *dst++ = *src++; |
| *dst++ = *src++; |
| *dst++ = *src++; |
| *dst++ = *src++; |
| *dst++ = *src++; |
| n -= 8; |
| } |
| while (n--) |
| *dst++ = *src++; |
| |
| // Trailing bits |
| if (last) |
| *dst = comp(*src, *dst, last); |
| } |
| } else { |
| // Different alignment for source and dest |
| |
| right = shift & (BITS_PER_LONG - 1); |
| left = -shift & (BITS_PER_LONG - 1); |
| |
| if (dst_idx + n <= BITS_PER_LONG) { |
| // Single destination word |
| if (last) |
| first &= last; |
| if (shift > 0) { |
| // Single source word |
| *dst = comp(*src >> right, *dst, first); |
| } else if (src_idx + n <= BITS_PER_LONG) { |
| // Single source word |
| *dst = comp(*src << left, *dst, first); |
| } else { |
| // 2 source words |
| d0 = *src++; |
| d1 = *src; |
| *dst = comp(d0 << left | d1 >> right, *dst, |
| first); |
| } |
| } else { |
| // Multiple destination words |
| d0 = *src++; |
| // Leading bits |
| if (shift > 0) { |
| // Single source word |
| *dst = comp(d0 >> right, *dst, first); |
| dst++; |
| n -= BITS_PER_LONG - dst_idx; |
| } else { |
| // 2 source words |
| d1 = *src++; |
| *dst = comp(d0 << left | d1 >> right, *dst, |
| first); |
| d0 = d1; |
| dst++; |
| n -= BITS_PER_LONG - dst_idx; |
| } |
| |
| // Main chunk |
| m = n % BITS_PER_LONG; |
| n /= BITS_PER_LONG; |
| while (n >= 4) { |
| d1 = *src++; |
| *dst++ = d0 << left | d1 >> right; |
| d0 = d1; |
| d1 = *src++; |
| *dst++ = d0 << left | d1 >> right; |
| d0 = d1; |
| d1 = *src++; |
| *dst++ = d0 << left | d1 >> right; |
| d0 = d1; |
| d1 = *src++; |
| *dst++ = d0 << left | d1 >> right; |
| d0 = d1; |
| n -= 4; |
| } |
| while (n--) { |
| d1 = *src++; |
| *dst++ = d0 << left | d1 >> right; |
| d0 = d1; |
| } |
| |
| // Trailing bits |
| if (last) { |
| if (m <= right) { |
| // Single source word |
| *dst = comp(d0 << left, *dst, last); |
| } else { |
| // 2 source words |
| d1 = *src; |
| *dst = comp(d0 << left | d1 >> right, |
| *dst, last); |
| } |
| } |
| } |
| } |
| } |
| |
| |
| /* |
| * Unaligned reverse bit copy using 32-bit or 64-bit memory accesses |
| */ |
| |
| static void bitcpy_rev(unsigned long *dst, int dst_idx, |
| const unsigned long *src, int src_idx, u32 n) |
| { |
| unsigned long first, last; |
| int shift = dst_idx - src_idx, left, right; |
| unsigned long d0, d1; |
| int m; |
| |
| if (!n) |
| return; |
| |
| dst += (n - 1) / BITS_PER_LONG; |
| src += (n - 1) / BITS_PER_LONG; |
| if ((n - 1) % BITS_PER_LONG) { |
| dst_idx += (n - 1) % BITS_PER_LONG; |
| dst += dst_idx >> SHIFT_PER_LONG; |
| dst_idx &= BITS_PER_LONG - 1; |
| src_idx += (n - 1) % BITS_PER_LONG; |
| src += src_idx >> SHIFT_PER_LONG; |
| src_idx &= BITS_PER_LONG - 1; |
| } |
| |
| shift = dst_idx - src_idx; |
| first = ~0UL << (BITS_PER_LONG - 1 - dst_idx); |
| last = ~(~0UL << (BITS_PER_LONG - 1 - ((dst_idx - n) % BITS_PER_LONG))); |
| |
| if (!shift) { |
| // Same alignment for source and dest |
| |
| if ((unsigned long)dst_idx + 1 >= n) { |
| // Single word |
| if (last) |
| first &= last; |
| *dst = comp(*src, *dst, first); |
| } else { |
| // Multiple destination words |
| // Leading bits |
| if (first) { |
| *dst = comp(*src, *dst, first); |
| dst--; |
| src--; |
| n -= dst_idx + 1; |
| } |
| |
| // Main chunk |
| n /= BITS_PER_LONG; |
| while (n >= 8) { |
| *dst-- = *src--; |
| *dst-- = *src--; |
| *dst-- = *src--; |
| *dst-- = *src--; |
| *dst-- = *src--; |
| *dst-- = *src--; |
| *dst-- = *src--; |
| *dst-- = *src--; |
| n -= 8; |
| } |
| while (n--) |
| *dst-- = *src--; |
| |
| // Trailing bits |
| if (last) |
| *dst = comp(*src, *dst, last); |
| } |
| } else { |
| // Different alignment for source and dest |
| |
| right = shift & (BITS_PER_LONG - 1); |
| left = -shift & (BITS_PER_LONG - 1); |
| |
| if ((unsigned long)dst_idx + 1 >= n) { |
| // Single destination word |
| if (last) |
| first &= last; |
| if (shift < 0) { |
| // Single source word |
| *dst = comp(*src << left, *dst, first); |
| } else if (1 + (unsigned long)src_idx >= n) { |
| // Single source word |
| *dst = comp(*src >> right, *dst, first); |
| } else { |
| // 2 source words |
| d0 = *src--; |
| d1 = *src; |
| *dst = comp(d0 >> right | d1 << left, *dst, |
| first); |
| } |
| } else { |
| // Multiple destination words |
| d0 = *src--; |
| // Leading bits |
| if (shift < 0) { |
| // Single source word |
| *dst = comp(d0 << left, *dst, first); |
| dst--; |
| n -= dst_idx + 1; |
| } else { |
| // 2 source words |
| d1 = *src--; |
| *dst = comp(d0 >> right | d1 << left, *dst, |
| first); |
| d0 = d1; |
| dst--; |
| n -= dst_idx + 1; |
| } |
| |
| // Main chunk |
| m = n % BITS_PER_LONG; |
| n /= BITS_PER_LONG; |
| while (n >= 4) { |
| d1 = *src--; |
| *dst-- = d0 >> right | d1 << left; |
| d0 = d1; |
| d1 = *src--; |
| *dst-- = d0 >> right | d1 << left; |
| d0 = d1; |
| d1 = *src--; |
| *dst-- = d0 >> right | d1 << left; |
| d0 = d1; |
| d1 = *src--; |
| *dst-- = d0 >> right | d1 << left; |
| d0 = d1; |
| n -= 4; |
| } |
| while (n--) { |
| d1 = *src--; |
| *dst-- = d0 >> right | d1 << left; |
| d0 = d1; |
| } |
| |
| // Trailing bits |
| if (last) { |
| if (m <= left) { |
| // Single source word |
| *dst = comp(d0 >> right, *dst, last); |
| } else { |
| // 2 source words |
| d1 = *src; |
| *dst = comp(d0 >> right | d1 << left, |
| *dst, last); |
| } |
| } |
| } |
| } |
| } |
| |
| |
| /* |
| * Unaligned forward inverting bit copy using 32-bit or 64-bit memory |
| * accesses |
| */ |
| |
| static void bitcpy_not(unsigned long *dst, int dst_idx, |
| const unsigned long *src, int src_idx, u32 n) |
| { |
| unsigned long first, last; |
| int shift = dst_idx - src_idx, left, right; |
| unsigned long d0, d1; |
| int m; |
| |
| if (!n) |
| return; |
| |
| shift = dst_idx - src_idx; |
| first = ~0UL <
|