mm: vmscan: stall page reclaim and writeback pages based on dirty/writepage pages encountered
Further testing of the "Reduce system disruption due to kswapd"
discovered a few problems. First and foremost, it's possible for pages
under writeback to be freed which will lead to badness. Second, as
pages were not being swapped the file LRU was being scanned faster and
clean file pages were being reclaimed. In some cases this results in
increased read IO to re-read data from disk. Third, more pages were
being written from kswapd context which can adversly affect IO
performance. Lastly, it was observed that PageDirty pages are not
necessarily dirty on all filesystems (buffers can be clean while
PageDirty is set and ->writepage generates no IO) and not all
filesystems set PageWriteback when the page is being written (e.g.
ext3). This disconnect confuses the reclaim stalling logic. This
follow-up series is aimed at these problems.
The tests were based on three kernels
vanilla: kernel 3.9 as that is what the current mmotm uses as a baseline
mmotm-20130522 is mmotm as of 22nd May with "Reduce system disruption due to
kswapd" applied on top as per what should be in Andrew's tree
right now
lessdisrupt-v7r10 is this follow-up series on top of the mmotm kernel
The first test used memcached+memcachetest while some background IO was
in progress as implemented by the parallel IO tests implement in MM
Tests. memcachetest benchmarks how many operations/second memcached can
service. It starts with no background IO on a freshly created ext4
filesystem and then re-runs the test with larger amounts of IO in the
background to roughly simulate a large copy in progress. The
expectation is that the IO should have little or no impact on
memcachetest which is running entirely in memory.
parallelio
3.9.0 3.9.0 3.9.0
vanilla mm1-mmotm-20130522 mm1-lessdisrupt-v7r10
Ops memcachetest-0M 23117.00 ( 0.00%) 22780.00 ( -1.46%) 22763.00 ( -1.53%)
Ops memcachetest-715M 23774.00 ( 0.00%) 23299.00 ( -2.00%) 22934.00 ( -3.53%)
Ops memcachetest-2385M 4208.00 ( 0.00%) 24154.00 (474.00%) 23765.00 (464.76%)
Ops memcachetest-4055M 4104.00 ( 0.00%) 25130.00 (512.33%) 24614.00 (499.76%)
Ops io-duration-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%)
Ops io-duration-715M 12.00 ( 0.00%) 7.00 ( 41.67%) 6.00 ( 50.00%)
Ops io-duration-2385M 116.00 ( 0.00%) 21.00 ( 81.90%) 21.00 ( 81.90%)
Ops io-duration-4055M 160.00 ( 0.00%) 36.00 ( 77.50%) 35.00 ( 78.12%)
Ops swaptotal-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%)
Ops swaptotal-715M 140138.00 ( 0.00%) 18.00 ( 99.99%) 18.00 ( 99.99%)
Ops swaptotal-2385M 385682.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%)
Ops swaptotal-4055M 418029.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%)
Ops swapin-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%)
Ops swapin-715M 144.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%)
Ops swapin-2385M 134227.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%)
Ops swapin-4055M 125618.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%)
Ops minorfaults-0M 1536429.00 ( 0.00%) 1531632.00 ( 0.31%) 1533541.00 ( 0.19%)
Ops minorfaults-715M 1786996.00 ( 0.00%) 1612148.00 ( 9.78%) 1608832.00 ( 9.97%)
Ops minorfaults-2385M 1757952.00 ( 0.00%) 1614874.00 ( 8.14%) 1613541.00 ( 8.21%)
Ops minorfaults-4055M 1774460.00 ( 0.00%) 1633400.00 ( 7.95%) 1630881.00 ( 8.09%)
Ops majorfaults-0M 1.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%)
Ops majorfaults-715M 184.00 ( 0.00%) 167.00 ( 9.24%) 166.00 ( 9.78%)
Ops majorfaults-2385M 24444.00 ( 0.00%) 155.00 ( 99.37%) 93.00 ( 99.62%)
Ops majorfaults-4055M 21357.00 ( 0.00%) 147.00 ( 99.31%) 134.00 ( 99.37%)
memcachetest is the transactions/second reported by memcachetest. In
the vanilla kernel note that performance drops from around
23K/sec to just over 4K/second when there is 2385M of IO going
on in the background. With current mmotm, there is no collapse
in performance and with this follow-up series there is little
change.
swaptotal is the total amount of swap traffic. With mmotm and the follow-up
series, the total amount of swapping is much reduced.
3.9.0 3.9.0 3.9.0
vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10
Minor Faults 11160152 10706748 10622316
Major Faults 46305 755 678
Swap Ins 260249 0 0
Swap Outs 683860 18 18
Direct pages scanned 0 678 2520
Kswapd pages scanned 6046108 8814900 1639279
Kswapd pages reclaimed 1081954 1172267 1094635
Direct pages reclaimed 0 566 2304
Kswapd efficiency 17% 13% 66%
Kswapd velocity 5217.560 7618.953 1414.879
Direct efficiency 100% 83% 91%
Direct velocity 0.000 0.586 2.175
Percentage direct scans 0% 0% 0%
Zone normal velocity 5105.086 6824.681 671.158
Zone dma32 velocity 112.473 794.858 745.896
Zone dma velocity 0.000 0.000 0.000
Page writes by reclaim 1929612.000 6861768.000 32821.000
Page writes file 1245752 6861750 32803
Page writes anon 683860 18 18
Page reclaim immediate 7484 40 239
Sector Reads 1130320 93996 86900
Sector Writes 13508052 10823500 11804436
Page rescued immediate 0 0 0
Slabs scanned 33536 27136 18560
Direct inode steals 0 0 0
Kswapd inode steals 8641 1035 0
Kswapd skipped wait 0 0 0
THP fault alloc 8 37 33
THP collapse alloc 508 552 515
THP splits 24 1 1
THP fault fallback 0 0 0
THP collapse fail 0 0 0
There are a number of observations to make here
1. Swap outs are almost eliminated. Swap ins are 0 indicating that the
pages swapped were really unused anonymous pages. Related to that,
major faults are much reduced.
2. kswapd efficiency was impacted by the initial series but with these
follow-up patches, the efficiency is now at 66% indicating that far
fewer pages were skipped during scanning due to dirty or writeback
pages.
3. kswapd velocity is reduced indicating that fewer pages are being scanned
with the follow-up series as kswapd now stalls when the tail of the
LRU queue is full of unqueued dirty pages. The stall gives flushers a
chance to catch-up so kswapd can reclaim clean pages when it wakes
4. In light of Zlatko's recent reports about zone scanning imbalances,
mmtests now reports scanning velocity on a per-zone basis. With mainline,
you can see that the scanning activity is dominated by the Normal
zone with over 45 times more scanning in Normal than the DMA32 zone.
With the series currently in mmotm, the ratio is slightly better but it
is still the case that the bulk of scanning is in the highest zone. With
this follow-up series, the ratio of scanning between the Normal and
DMA32 zone is roughly equal.
5. As Dave Chinner observed, the current patches in mmotm increased the
number of pages written from kswapd context which is expected to adversly
impact IO performance. With the follow-up patches, far fewer pages are
written from kswapd context than the mainline kernel
6. With the series in mmotm, fewer inodes were reclaimed by kswapd. With
the follow-up series, there is less slab shrinking activity and no inodes
were reclaimed.
7. Note that "Sectors Read" is drastically reduced implying that the source
data being used for the IO is not being aggressively discarded due to
page reclaim skipping over dirty pages and reclaiming clean pages. Note
that the reducion in reads could also be due to inode data not being
re-read from disk after a slab shrink.
3.9.0 3.9.0 3.9.0
vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10
Mean sda-avgqz 166.99 32.09 33.44
Mean sda-await 853.64 192.76 185.43
Mean sda-r_await 6.31 9.24 5.97
Mean sda-w_await 2992.81 202.65 192.43
Max sda-avgqz 1409.91 718.75 698.98
Max sda-await 6665.74 3538.00 3124.23
Max sda-r_await 58.96 111.95 58.00
Max sda-w_await 28458.94 3977.29 3148.61
In light of the changes in writes from reclaim context, the number of
reads and Dave Chinner's concerns about IO performance I took a closer
look at the IO stats for the test disk. Few observations
1. The average queue size is reduced by the initial series and roughly
the same with this follow up.
2. Average wait times for writes are reduced and as the IO
is completing faster it at least implies that the gain is because
flushers are writing the files efficiently instead of page reclaim
getting in the way.
3. The reduction in maximum write latency is staggering. 28 seconds down
to 3 seconds.
Jan Kara asked how NFS is affected by all of this. Unstable pages can
be taken into account as one of the patches in the series shows but it
is still the case that filesystems with unusual handling of dirty or
writeback could still be treated better.
Tests like postmark, fsmark and largedd showed up nothing useful. On my test
setup, pages are simply not being written back from reclaim context with or
without the patches and there are no changes in performance. My test setup
probably is just not strong enough network-wise to be really interesting.
I ran a longer-lived memcached test with IO going to NFS instead of a local disk
parallelio
3.9.0 3.9.0 3.9.0
vanilla mm1-mmotm-20130522 mm1-lessdisrupt-v7r10
Ops memcachetest-0M 23323.00 ( 0.00%) 23241.00 ( -0.35%) 23321.00 ( -0.01%)
Ops memcachetest-715M 25526.00 ( 0.00%) 24763.00 ( -2.99%) 23242.00 ( -8.95%)
Ops memcachetest-2385M 8814.00 ( 0.00%) 26924.00 (205.47%) 23521.00 (166.86%)
Ops memcachetest-4055M 5835.00 ( 0.00%) 26827.00 (359.76%) 25560.00 (338.05%)
Ops io-duration-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%)
Ops io-duration-715M 65.00 ( 0.00%) 71.00 ( -9.23%) 11.00 ( 83.08%)
Ops io-duration-2385M 129.00 ( 0.00%) 94.00 ( 27.13%) 53.00 ( 58.91%)
Ops io-duration-4055M 301.00 ( 0.00%) 100.00 ( 66.78%) 108.00 ( 64.12%)
Ops swaptotal-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%)
Ops swaptotal-715M 14394.00 ( 0.00%) 949.00 ( 93.41%) 63.00 ( 99.56%)
Ops swaptotal-2385M 401483.00 ( 0.00%) 24437.00 ( 93.91%) 30118.00 ( 92.50%)
Ops swaptotal-4055M 554123.00 ( 0.00%) 35688.00 ( 93.56%) 63082.00 ( 88.62%)
Ops swapin-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%)
Ops swapin-715M 4522.00 ( 0.00%) 560.00 ( 87.62%) 63.00 ( 98.61%)
Ops swapin-2385M 169861.00 ( 0.00%) 5026.00 ( 97.04%) 13917.00 ( 91.81%)
Ops swapin-4055M 192374.00 ( 0.00%) 10056.00 ( 94.77%) 25729.00 ( 86.63%)
Ops minorfaults-0M 1445969.00 ( 0.00%) 1520878.00 ( -5.18%) 1454024.00 ( -0.56%)
Ops minorfaults-715M 1557288.00 ( 0.00%) 1528482.00 ( 1.85%) 1535776.00 ( 1.38%)
Ops minorfaults-2385M 1692896.00 ( 0.00%) 1570523.00 ( 7.23%) 1559622.00 ( 7.87%)
Ops minorfaults-4055M 1654985.00 ( 0.00%) 1581456.00 ( 4.44%) 1596713.00 ( 3.52%)
Ops majorfaults-0M 0.00 ( 0.00%) 1.00 (-99.00%) 0.00 ( 0.00%)
Ops majorfaults-715M 763.00 ( 0.00%) 265.00 ( 65.27%) 75.00 ( 90.17%)
Ops majorfaults-2385M 23861.00 ( 0.00%) 894.00 ( 96.25%) 2189.00 ( 90.83%)
Ops majorfaults-4055M 27210.00 ( 0.00%) 1569.00 ( 94.23%) 4088.00 ( 84.98%)
1. Performance does not collapse due to IO which is good. IO is also completing
faster. Note with mmotm, IO completes in a third of the time and faster again
with this series applied
2. Swapping is reduced, although not eliminated. The figures for the follow-up
look bad but it does vary a bit as the stalling is not perfect for nfs
or filesystems like ext3 with unusual handling of dirty and writeback
pages
3. There are swapins, particularly with larger amounts of IO indicating
that active pages are being reclaimed. However, the number of much
reduced.
3.9.0 3.9.0 3.9.0
vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10
Minor Faults 36339175 35025445 35219699
Major Faults 310964 27108 51887
Swap Ins 2176399 173069 333316
Swap Outs 3344050 357228 504824
Direct pages scanned 8972 77283 43242
Kswapd pages scanned 20899983 8939566 14772851
Kswapd pages reclaimed 6193156 5172605 5231026
Direct pages reclaimed 8450 73802 39514
Kswapd efficiency 29% 57% 35%
Kswapd velocity 3929.743 1847.499 3058.840
Direct efficiency 94% 95% 91%
Direct velocity 1.687 15.972 8.954
Percentage direct scans 0% 0% 0%
Zone normal velocity 3721.907 939.103 2185.142
Zone dma32 velocity 209.522 924.368 882.651
Zone dma velocity 0.000 0.000 0.000
Page writes by reclaim 4082185.000 526319.000 537114.000
Page writes file 738135 169091 32290
Page writes anon 3344050 357228 504824
Page reclaim immediate 9524 170 5595843
Sector Reads 8909900 861192 1483680
Sector Writes 13428980 1488744 2076800
Page rescued immediate 0 0 0
Slabs scanned 38016 31744 28672
Direct inode steals 0 0 0
Kswapd inode steals 424 0 0
Kswapd skipped wait 0 0 0
THP fault alloc 14 15 119
THP collapse alloc 1767 1569 1618
THP splits 30 29 25
THP fault fallback 0 0 0
THP collapse fail 8 5 0
Compaction stalls 17 41 100
Compaction success 7 31 95
Compaction failures 10 10 5
Page migrate success 7083 22157 62217
Page migrate failure 0 0 0
Compaction pages isolated 14847 48758 135830
Compaction migrate scanned 18328 48398 138929
Compaction free scanned 2000255 355827 1720269
Compaction cost 7 24 68
I guess the main takeaway again is the much reduced page writes
from reclaim context and reduced reads.
3.9.0 3.9.0 3.9.0
vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10
Mean sda-avgqz 23.58 0.35 0.44
Mean sda-await 133.47 15.72 15.46
Mean sda-r_await 4.72 4.69 3.95
Mean sda-w_await 507.69 28.40 33.68
Max sda-avgqz 680.60 12.25 23.14
Max sda-await 3958.89 221.83 286.22
Max sda-r_await 63.86 61.23 67.29
Max sda-w_await 11710.38 883.57 1767.28
And as before, write wait times are much reduced.
This patch:
The patch "mm: vmscan: Have kswapd writeback pages based on dirty pages
encountered, not priority" decides whether to writeback pages from reclaim
context based on the number of dirty pages encountered. This situation is
flagged too easily and flushers are not given the chance to catch up
resulting in more pages being written from reclaim context and potentially
impacting IO performance. The check for PageWriteback is also misplaced
as it happens within a PageDirty check which is nonsense as the dirty may
have been cleared for IO. The accounting is updated very late and pages
that are already under writeback, were reactivated, could not unmapped or
could not be released are all missed. Similarly, a page is considered
congested for reasons other than being congested and pages that cannot be
written out in the correct context are skipped. Finally, it considers
stalling and writing back filesystem pages due to encountering dirty
anonymous pages at the tail of the LRU which is dumb.
This patch causes kswapd to begin writing filesystem pages from reclaim
context only if page reclaim found that all filesystem pages at the tail
of the LRU were unqueued dirty pages. Before it starts writing filesystem
pages, it will stall to give flushers a chance to catch up. The decision
on whether wait_iff_congested is also now determined by dirty filesystem
pages only. Congested pages are based on whether the underlying BDI is
congested regardless of the context of the reclaiming process.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 4a43c28..999ef0b 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -669,6 +669,25 @@
return PAGEREF_RECLAIM;
}
+/* Check if a page is dirty or under writeback */
+static void page_check_dirty_writeback(struct page *page,
+ bool *dirty, bool *writeback)
+{
+ /*
+ * Anonymous pages are not handled by flushers and must be written
+ * from reclaim context. Do not stall reclaim based on them
+ */
+ if (!page_is_file_cache(page)) {
+ *dirty = false;
+ *writeback = false;
+ return;
+ }
+
+ /* By default assume that the page flags are accurate */
+ *dirty = PageDirty(page);
+ *writeback = PageWriteback(page);
+}
+
/*
* shrink_page_list() returns the number of reclaimed pages
*/
@@ -697,6 +716,7 @@
struct page *page;
int may_enter_fs;
enum page_references references = PAGEREF_RECLAIM_CLEAN;
+ bool dirty, writeback;
cond_resched();
@@ -725,6 +745,24 @@
(PageSwapCache(page) && (sc->gfp_mask & __GFP_IO));
/*
+ * The number of dirty pages determines if a zone is marked
+ * reclaim_congested which affects wait_iff_congested. kswapd
+ * will stall and start writing pages if the tail of the LRU
+ * is all dirty unqueued pages.
+ */
+ page_check_dirty_writeback(page, &dirty, &writeback);
+ if (dirty || writeback)
+ nr_dirty++;
+
+ if (dirty && !writeback)
+ nr_unqueued_dirty++;
+
+ /* Treat this page as congested if underlying BDI is */
+ mapping = page_mapping(page);
+ if (mapping && bdi_write_congested(mapping->backing_dev_info))
+ nr_congested++;
+
+ /*
* If a page at the tail of the LRU is under writeback, there
* are three cases to consider.
*
@@ -819,9 +857,10 @@
if (!add_to_swap(page, page_list))
goto activate_locked;
may_enter_fs = 1;
- }
- mapping = page_mapping(page);
+ /* Adding to swap updated mapping */
+ mapping = page_mapping(page);
+ }
/*
* The page is mapped into the page tables of one or more
@@ -841,11 +880,6 @@
}
if (PageDirty(page)) {
- nr_dirty++;
-
- if (!PageWriteback(page))
- nr_unqueued_dirty++;
-
/*
* Only kswapd can writeback filesystem pages to
* avoid risk of stack overflow but only writeback
@@ -876,7 +910,6 @@
/* Page is dirty, try to write it out here */
switch (pageout(page, mapping, sc)) {
case PAGE_KEEP:
- nr_congested++;
goto keep_locked;
case PAGE_ACTIVATE:
goto activate_locked;
@@ -1318,7 +1351,7 @@
unsigned long nr_scanned;
unsigned long nr_reclaimed = 0;
unsigned long nr_taken;
- unsigned long nr_dirty = 0;
+ unsigned long nr_unqueued_dirty = 0;
unsigned long nr_writeback = 0;
isolate_mode_t isolate_mode = 0;
int file = is_file_lru(lru);
@@ -1361,7 +1394,7 @@
return 0;
nr_reclaimed = shrink_page_list(&page_list, zone, sc, TTU_UNMAP,
- &nr_dirty, &nr_writeback, false);
+ &nr_unqueued_dirty, &nr_writeback, false);
spin_lock_irq(&zone->lru_lock);
@@ -1416,11 +1449,13 @@
/*
* Similarly, if many dirty pages are encountered that are not
* currently being written then flag that kswapd should start
- * writing back pages.
+ * writing back pages and stall to give a chance for flushers
+ * to catch up.
*/
- if (global_reclaim(sc) && nr_dirty &&
- nr_dirty >= (nr_taken >> (DEF_PRIORITY - sc->priority)))
+ if (global_reclaim(sc) && nr_unqueued_dirty == nr_taken) {
+ congestion_wait(BLK_RW_ASYNC, HZ/10);
zone_set_flag(zone, ZONE_TAIL_LRU_DIRTY);
+ }
trace_mm_vmscan_lru_shrink_inactive(zone->zone_pgdat->node_id,
zone_idx(zone),
