# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pci/intel,keembay-pcie.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Intel Keem Bay PCIe controller Root Complex mode

maintainers:
  - Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
  - Srikanth Thokala <srikanth.thokala@intel.com>

allOf:
  - $ref: /schemas/pci/pci-bus.yaml#

properties:
  compatible:
    const: intel,keembay-pcie

  ranges:
    maxItems: 1

  reset-gpios:
    maxItems: 1

  reg:
    maxItems: 4

  reg-names:
    items:
      - const: dbi
      - const: atu
      - const: config
      - const: apb

  clocks:
    maxItems: 2

  clock-names:
    items:
      - const: master
      - const: aux

  interrupts:
    maxItems: 3

  interrupt-names:
    items:
      - const: pcie
      - const: pcie_ev
      - const: pcie_err

  num-lanes:
    description: Number of lanes to use.
    enum: [ 1, 2 ]

required:
  - compatible
  - reg
  - reg-names
  - ranges
  - clocks
  - clock-names
  - interrupts
  - interrupt-names
  - reset-gpios

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/interrupt-controller/irq.h>
    #include <dt-bindings/gpio/gpio.h>
    #define KEEM_BAY_A53_PCIE
    #define KEEM_BAY_A53_AUX_PCIE
    pcie@37000000 {
          compatible = "intel,keembay-pcie";
          reg = <0x37000000 0x00001000>,
                <0x37300000 0x00001000>,
                <0x36e00000 0x00200000>,
                <0x37800000 0x00000200>;
          reg-names = "dbi", "atu", "config", "apb";
          #address-cells = <3>;
          #size-cells = <2>;
          device_type = "pci";
          ranges = <0x02000000 0 0x36000000 0x36000000 0 0x00e00000>;
          interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
                       <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
                       <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
          interrupt-names = "pcie", "pcie_ev", "pcie_err";
          clocks = <&scmi_clk KEEM_BAY_A53_PCIE>,
                   <&scmi_clk KEEM_BAY_A53_AUX_PCIE>;
          clock-names = "master", "aux";
          reset-gpios = <&pca2 9 GPIO_ACTIVE_LOW>;
          num-lanes = <2>;
    };