# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/regulator/qcom,smd-rpm-regulator.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: QCOM SMD RPM REGULATOR

description:
  The Qualcomm RPM over SMD regulator is modelled as a subdevice of the RPM.
  Because SMD is used as the communication transport mechanism, the RPM
  resides as a subnode of the SMD.  As such, the SMD-RPM regulator requires
  that the SMD and RPM nodes be present.

  Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt for
  information pertaining to the SMD node.

  Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
  for information regarding the RPM node.

  The regulator node houses sub-nodes for each regulator within the device.
  Each sub-node is identified using the node's name, with valid values listed
  for each of the pmics below.

  For mp5496, s2

  For pm8841, s1, s2, s3, s4, s5, s6, s7, s8

  For pm8916, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
  l12, l13, l14, l15, l16, l17, l18

  For pm8941, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
  l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2,
  lvs3, 5vs1, 5vs2

  For pm8950 and pm8953, s1, s2, s3, s4, s5, s6, s7, l1, l2, l3, l4, l5, l6,
  l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22,
  l23

  For pm8994, s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3,
  l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19,
  l20, l21, l22, l23, l24, l25, l26, l27, l28, l29, l30, l31, l32, lvs1, lvs2

  For pm8998, s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, s13, l1, l2,
  l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19,
  l20, l21, l22, l23, l24, l25, l26, l27, l28, lvs1, lvs2

  For pm660, s1, s2, s3, s4, s5, s6, l1, l2, l3, l5, l6, l7, l8, l9, l10, l22,
  l12, l13, l14, l15, l16, l17, l18, l19

  For pm660l s1, s2, s3, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, bob

  For pma8084, s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3,
  l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19,
  l20, l21, l22, l23, l24, l25, l26, l27, lvs1, lvs2, lvs3, lvs4, 5vs1

  For pmi8994, s1, s2, s3, boost-bypass

  For pmi8998, bob

  For pms405, s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
  l12, l13

maintainers:
  - Kathiravan T <kathirav@codeaurora.org>

properties:
  compatible:
    enum:
      - qcom,rpm-mp5496-regulators
      - qcom,rpm-pm8841-regulators
      - qcom,rpm-pm8916-regulators
      - qcom,rpm-pm8941-regulators
      - qcom,rpm-pm8950-regulators
      - qcom,rpm-pm8953-regulators
      - qcom,rpm-pm8994-regulators
      - qcom,rpm-pm8998-regulators
      - qcom,rpm-pm660-regulators
      - qcom,rpm-pm660l-regulators
      - qcom,rpm-pma8084-regulators
      - qcom,rpm-pmi8994-regulators
      - qcom,rpm-pmi8998-regulators
      - qcom,rpm-pms405-regulators

patternProperties:
  ".*-supply$":
    description: Input supply phandle(s) for this node

  "^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$":
    description: List of regulators and its properties
    $ref: regulator.yaml#

additionalProperties: false

required:
  - compatible

examples:
  - |
    pm8941-regulators {
        compatible = "qcom,rpm-pm8941-regulators";
        vdd_l13_l20_l23_l24-supply = <&pm8941_boost>;

        pm8941_s3: s3 {
            regulator-min-microvolt = <1800000>;
            regulator-max-microvolt = <1800000>;
        };

        pm8941_boost: s4 {
            regulator-min-microvolt = <5000000>;
            regulator-max-microvolt = <5000000>;
        };

        pm8941_l20: l20 {
            regulator-min-microvolt = <2950000>;
            regulator-max-microvolt = <2950000>;
        };
    };
...