/*
 * Copyright © 2006-2007 Intel Corporation
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice (including the next
 * paragraph) shall be included in all copies or substantial portions of the
 * Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
 * DEALINGS IN THE SOFTWARE.
 *
 * Authors:
 *	Eric Anholt <eric@anholt.net>
 */

#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/intel-iommu.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/dma-resv.h>
#include <linux/slab.h>

#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_atomic_uapi.h>
#include <drm/drm_damage_helper.h>
#include <drm/drm_dp_helper.h>
#include <drm/drm_edid.h>
#include <drm/drm_fourcc.h>
#include <drm/drm_plane_helper.h>
#include <drm/drm_probe_helper.h>
#include <drm/drm_rect.h>

#include "display/intel_crt.h"
#include "display/intel_ddi.h"
#include "display/intel_dp.h"
#include "display/intel_dp_mst.h"
#include "display/intel_dpll_mgr.h"
#include "display/intel_dsi.h"
#include "display/intel_dvo.h"
#include "display/intel_gmbus.h"
#include "display/intel_hdmi.h"
#include "display/intel_lvds.h"
#include "display/intel_sdvo.h"
#include "display/intel_tv.h"
#include "display/intel_vdsc.h"

#include "gt/intel_rps.h"

#include "i915_drv.h"
#include "i915_trace.h"
#include "intel_acpi.h"
#include "intel_atomic.h"
#include "intel_atomic_plane.h"
#include "intel_bw.h"
#include "intel_cdclk.h"
#include "intel_color.h"
#include "intel_csr.h"
#include "intel_display_types.h"
#include "intel_dp_link_training.h"
#include "intel_fbc.h"
#include "intel_fbdev.h"
#include "intel_fifo_underrun.h"
#include "intel_frontbuffer.h"
#include "intel_hdcp.h"
#include "intel_hotplug.h"
#include "intel_overlay.h"
#include "intel_pipe_crc.h"
#include "intel_pm.h"
#include "intel_psr.h"
#include "intel_quirks.h"
#include "intel_sideband.h"
#include "intel_sprite.h"
#include "intel_tc.h"
#include "intel_vga.h"

/* Primary plane formats for gen <= 3 */
static const u32 i8xx_primary_formats[] = {
	DRM_FORMAT_C8,
	DRM_FORMAT_XRGB1555,
	DRM_FORMAT_RGB565,
	DRM_FORMAT_XRGB8888,
};

/* Primary plane formats for ivb (no fp16 due to hw issue) */
static const u32 ivb_primary_formats[] = {
	DRM_FORMAT_C8,
	DRM_FORMAT_RGB565,
	DRM_FORMAT_XRGB8888,
	DRM_FORMAT_XBGR8888,
	DRM_FORMAT_XRGB2101010,
	DRM_FORMAT_XBGR2101010,
};

/* Primary plane formats for gen >= 4, except ivb */
static const u32 i965_primary_formats[] = {
	DRM_FORMAT_C8,
	DRM_FORMAT_RGB565,
	DRM_FORMAT_XRGB8888,
	DRM_FORMAT_XBGR8888,
	DRM_FORMAT_XRGB2101010,
	DRM_FORMAT_XBGR2101010,
	DRM_FORMAT_XBGR16161616F,
};

/* Primary plane formats for vlv/chv */
static const u32 vlv_primary_formats[] = {
	DRM_FORMAT_C8,
	DRM_FORMAT_RGB565,
	DRM_FORMAT_XRGB8888,
	DRM_FORMAT_XBGR8888,
	DRM_FORMAT_ARGB8888,
	DRM_FORMAT_ABGR8888,
	DRM_FORMAT_XRGB2101010,
	DRM_FORMAT_XBGR2101010,
	DRM_FORMAT_ARGB2101010,
	DRM_FORMAT_ABGR2101010,
	DRM_FORMAT_XBGR16161616F,
};

static const u64 i9xx_format_modifiers[] = {
	I915_FORMAT_MOD_X_TILED,
	DRM_FORMAT_MOD_LINEAR,
	DRM_FORMAT_MOD_INVALID
};

/* Cursor formats */
static const u32 intel_cursor_formats[] = {
	DRM_FORMAT_ARGB8888,
};

static const u64 cursor_format_modifiers[] = {
	DRM_FORMAT_MOD_LINEAR,
	DRM_FORMAT_MOD_INVALID
};

static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
				struct intel_crtc_state *pipe_config);
static void ilk_pch_clock_get(struct intel_crtc *crtc,
			      struct intel_crtc_state *pipe_config);

static int intel_framebuffer_init(struct intel_framebuffer *ifb,
				  struct drm_i915_gem_object *obj,
				  struct drm_mode_fb_cmd2 *mode_cmd);
static void intel_set_pipe_timings(const struct intel_crtc_state *crtc_state);
static void intel_set_pipe_src_size(const struct intel_crtc_state *crtc_state);
static void intel_cpu_transcoder_set_m_n(const struct intel_crtc_state *crtc_state,
					 const struct intel_link_m_n *m_n,
					 const struct intel_link_m_n *m2_n2);
static void i9xx_set_pipeconf(const struct intel_crtc_state *crtc_state);
static void ilk_set_pipeconf(const struct intel_crtc_state *crtc_state);
static void hsw_set_pipeconf(const struct intel_crtc_state *crtc_state);
static void bdw_set_pipemisc(const struct intel_crtc_state *crtc_state);
static void vlv_prepare_pll(struct intel_crtc *crtc,
			    const struct intel_crtc_state *pipe_config);
static void chv_prepare_pll(struct intel_crtc *crtc,
			    const struct intel_crtc_state *pipe_config);
static void skl_pfit_enable(const struct intel_crtc_state *crtc_state);
static void ilk_pfit_enable(const struct intel_crtc_state *crtc_state);
static void intel_modeset_setup_hw_state(struct drm_device *dev,
					 struct drm_modeset_acquire_ctx *ctx);
static struct intel_crtc_state *intel_crtc_state_alloc(struct intel_crtc *crtc);

struct intel_limit {
	struct {
		int min, max;
	} dot, vco, n, m, m1, m2, p, p1;

	struct {
		int dot_limit;
		int p2_slow, p2_fast;
	} p2;
};

/* returns HPLL frequency in kHz */
int vlv_get_hpll_vco(struct drm_i915_private *dev_priv)
{
	int hpll_freq, vco_freq[] = { 800, 1600, 2000, 2400 };

	/* Obtain SKU information */
	hpll_freq = vlv_cck_read(dev_priv, CCK_FUSE_REG) &
		CCK_FUSE_HPLL_FREQ_MASK;

	return vco_freq[hpll_freq] * 1000;
}

int vlv_get_cck_clock(struct drm_i915_private *dev_priv,
		      const char *name, u32 reg, int ref_freq)
{
	u32 val;
	int divider;

	val = vlv_cck_read(dev_priv, reg);
	divider = val & CCK_FREQUENCY_VALUES;

	drm_WARN(&dev_priv->drm, (val & CCK_FREQUENCY_STATUS) !=
		 (divider << CCK_FREQUENCY_STATUS_SHIFT),
		 "%s change in progress\n", name);

	return DIV_ROUND_CLOSEST(ref_freq << 1, divider + 1);
}

int vlv_get_cck_clock_hpll(struct drm_i915_private *dev_priv,
			   const char *name, u32 reg)
{
	int hpll;

	vlv_cck_get(dev_priv);

	if (dev_priv->hpll_freq == 0)
		dev_priv->hpll_freq = vlv_get_hpll_vco(dev_priv);

	hpll = vlv_get_cck_clock(dev_priv, name, reg, dev_priv->hpll_freq);

	vlv_cck_put(dev_priv);

	return hpll;
}

static void intel_update_czclk(struct drm_i915_private *dev_priv)
{
	if (!(IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)))
		return;

	dev_priv->czclk_freq = vlv_get_cck_clock_hpll(dev_priv, "czclk",
						      CCK_CZ_CLOCK_CONTROL);

	drm_dbg(&dev_priv->drm, "CZ clock rate: %d kHz\n",
		dev_priv->czclk_freq);
}

/* units of 100MHz */
static u32 intel_fdi_link_freq(struct drm_i915_private *dev_priv,
			       const struct intel_crtc_state *pipe_config)
{
	if (HAS_DDI(dev_priv))
		return pipe_config->port_clock; /* SPLL */
	else
		return dev_priv->fdi_pll_freq;
}

static const struct intel_limit intel_limits_i8xx_dac = {
	.dot = { .min = 25000, .max = 350000 },
	.vco = { .min = 908000, .max = 1512000 },
	.n = { .min = 2, .max = 16 },
	.m = { .min = 96, .max = 140 },
	.m1 = { .min = 18, .max = 26 },
	.m2 = { .min = 6, .max = 16 },
	.p = { .min = 4, .max = 128 },
	.p1 = { .min = 2, .max = 33 },
	.p2 = { .dot_limit = 165000,
		.p2_slow = 4, .p2_fast = 2 },
};

static const struct intel_limit intel_limits_i8xx_dvo = {
	.dot = { .min = 25000, .max = 350000 },
	.vco = { .min = 908000, .max = 1512000 },
	.n = { .min = 2, .max = 16 },
	.m = { .min = 96, .max = 140 },
	.m1 = { .min = 18, .max = 26 },
	.m2 = { .min = 6, .max = 16 },
	.p = { .min = 4, .max = 128 },
	.p1 = { .min = 2, .max = 33 },
	.p2 = { .dot_limit = 165000,
		.p2_slow = 4, .p2_fast = 4 },
};

static const struct intel_limit intel_limits_i8xx_lvds = {
	.dot = { .min = 25000, .max = 350000 },
	.vco = { .min = 908000, .max = 1512000 },
	.n = { .min = 2, .max = 16 },
	.m = { .min = 96, .max = 140 },
	.m1 = { .min = 18, .max = 26 },
	.m2 = { .min = 6, .max = 16 },
	.p = { .min = 4, .max = 128 },
	.p1 = { .min = 1, .max = 6 },
	.p2 = { .dot_limit = 165000,
		.p2_slow = 14, .p2_fast = 7 },
};

static const struct intel_limit intel_limits_i9xx_sdvo = {
	.dot = { .min = 20000, .max = 400000 },
	.vco = { .min = 1400000, .max = 2800000 },
	.n = { .min = 1, .max = 6 },
	.m = { .min = 70, .max = 120 },
	.m1 = { .min = 8, .max = 18 },
	.m2 = { .min = 3, .max = 7 },
	.p = { .min = 5, .max = 80 },
	.p1 = { .min = 1, .max = 8 },
	.p2 = { .dot_limit = 200000,
		.p2_slow = 10, .p2_fast = 5 },
};

static const struct intel_limit intel_limits_i9xx_lvds = {
	.dot = { .min = 20000, .max = 400000 },
	.vco = { .min = 1400000, .max = 2800000 },
	.n = { .min = 1, .max = 6 },
	.m = { .min = 70, .max = 120 },
	.m1 = { .min = 8, .max = 18 },
	.m2 = { .min = 3, .max = 7 },
	.p = { .min = 7, .max = 98 },
	.p1 = { .min = 1, .max = 8 },
	.p2 = { .dot_limit = 112000,
		.p2_slow = 14, .p2_fast = 7 },
};


static const struct intel_limit intel_limits_g4x_sdvo = {
	.dot = { .min = 25000, .max = 270000 },
	.vco = { .min = 1750000, .max = 3500000},
	.n = { .min = 1, .max = 4 },
	.m = { .min = 104, .max = 138 },
	.m1 = { .min = 17, .max = 23 },
	.m2 = { .min = 5, .max = 11 },
	.p = { .min = 10, .max = 30 },
	.p1 = { .min = 1, .max = 3},
	.p2 = { .dot_limit = 270000,
		.p2_slow = 10,
		.p2_fast = 10
	},
};

static const struct intel_limit intel_limits_g4x_hdmi = {
	.dot = { .min = 22000, .max = 400000 },
	.vco = { .min = 1750000, .max = 3500000},
	.n = { .min = 1, .max = 4 },
	.m = { .min = 104, .max = 138 },
	.m1 = { .min = 16, .max = 23 },
	.m2 = { .min = 5, .max = 11 },
	.p = { .min = 5, .max = 80 },
	.p1 = { .min = 1, .max = 8},
	.p2 = { .dot_limit = 165000,
		.p2_slow = 10, .p2_fast = 5 },
};

static const struct intel_limit intel_limits_g4x_single_channel_lvds = {
	.dot = { .min = 20000, .max = 115000 },
	.vco = { .min = 1750000, .max = 3500000 },
	.n = { .min = 1, .max = 3 },
	.m = { .min = 104, .max = 138 },
	.m1 = { .min = 17, .max = 23 },
	.m2 = { .min = 5, .max = 11 },
	.p = { .min = 28, .max = 112 },
	.p1 = { .min = 2, .max = 8 },
	.p2 = { .dot_limit = 0,
		.p2_slow = 14, .p2_fast = 14
	},
};

static const struct intel_limit intel_limits_g4x_dual_channel_lvds = {
	.dot = { .min = 80000, .max = 224000 },
	.vco = { .min = 1750000, .max = 3500000 },
	.n = { .min = 1, .max = 3 },
	.m = { .min = 104, .max = 138 },
	.m1 = { .min = 17, .max = 23 },
	.m2 = { .min = 5, .max = 11 },
	.p = { .min = 14, .max = 42 },
	.p1 = { .min = 2, .max = 6 },
	.p2 = { .dot_limit = 0,
		.p2_slow = 7, .p2_fast = 7
	},
};

static const struct intel_limit pnv_limits_sdvo = {
	.dot = { .min = 20000, .max = 400000},
	.vco = { .min = 1700000, .max = 3500000 },
	/* Pineview's Ncounter is a ring counter */
	.n = { .min = 3, .max = 6 },
	.m = { .min = 2, .max = 256 },
	/* Pineview only has one combined m divider, which we treat as m2. */
	.m1 = { .min = 0, .max = 0 },
	.m2 = { .min = 0, .max = 254 },
	.p = { .min = 5, .max = 80 },
	.p1 = { .min = 1, .max = 8 },
	.p2 = { .dot_limit = 200000,
		.p2_slow = 10, .p2_fast = 5 },
};

static const struct intel_limit pnv_limits_lvds = {
	.dot = { .min = 20000, .max = 400000 },
	.vco = { .min = 1700000, .max = 3500000 },
	.n = { .min = 3, .max = 6 },
	.m = { .min = 2, .max = 256 },
	.m1 = { .min = 0, .max = 0 },
	.m2 = { .min = 0, .max = 254 },
	.p = { .min = 7, .max = 112 },
	.p1 = { .min = 1, .max = 8 },
	.p2 = { .dot_limit = 112000,
		.p2_slow = 14, .p2_fast = 14 },
};

/* Ironlake / Sandybridge
 *
 * We calculate clock using (register_value + 2) for N/M1/M2, so here
 * the range value for them is (actual_value - 2).
 */
static const struct intel_limit ilk_limits_dac = {
	.dot = { .min = 25000, .max = 350000 },
	.vco = { .min = 1760000, .max = 3510000 },
	.n = { .min = 1, .max = 5 },
	.m = { .min = 79, .max = 127 },
	.m1 = { .min = 12, .max = 22 },
	.m2 = { .min = 5, .max = 9 },
	.p = { .min = 5, .max = 80 },
	.p1 = { .min = 1, .max = 8 },
	.p2 = { .dot_limit = 225000,
		.p2_slow = 10, .p2_fast = 5 },
};

static const struct intel_limit ilk_limits_single_lvds = {
	.dot = { .min = 25000, .max = 350000 },
	.vco = { .min = 1760000, .max = 3510000 },
	.n = { .min = 1, .max = 3 },
	.m = { .min = 79, .max = 118 },
	.m1 = { .min = 12, .max = 22 },
	.m2 = { .min = 5, .max = 9 },
	.p = { .min = 28, .max = 112 },
	.p1 = { .min = 2, .max = 8 },
	.p2 = { .dot_limit = 225000,
		.p2_slow = 14, .p2_fast = 14 },
};

static const struct intel_limit ilk_limits_dual_lvds = {
	.dot = { .min = 25000, .max = 350000 },
	.vco = { .min = 1760000, .max = 3510000 },
	.n = { .min = 1, .max = 3 },
	.m = { .min = 79, .max = 127 },
	.m1 = { .min = 12, .max = 22 },
	.m2 = { .min = 5, .max = 9 },
	.p = { .min = 14, .max = 56 },
	.p1 = { .min = 2, .max = 8 },
	.p2 = { .dot_limit = 225000,
		.p2_slow = 7, .p2_fast = 7 },
};

/* LVDS 100mhz refclk limits. */
static const struct intel_limit ilk_limits_single_lvds_100m = {
	.dot = { .min = 25000, .max = 350000 },
	.vco = { .min = 1760000, .max = 3510000 },
	.n = { .min = 1, .max = 2 },
	.m = { .min = 79, .max = 126 },
	.m1 = { .min = 12, .max = 22 },
	.m2 = { .min = 5, .max = 9 },
	.p = { .min = 28, .max = 112 },
	.p1 = { .min = 2, .max = 8 },
	.p2 = { .dot_limit = 225000,
		.p2_slow = 14, .p2_fast = 14 },
};

static const struct intel_limit ilk_limits_dual_lvds_100m = {
	.dot = { .min = 25000, .max = 350000 },
	.vco = { .min = 1760000, .max = 3510000 },
	.n = { .min = 1, .max = 3 },
	.m = { .min = 79, .max = 126 },
	.m1 = { .min = 12, .max = 22 },
	.m2 = { .min = 5, .max = 9 },
	.p = { .min = 14, .max = 42 },
	.p1 = { .min = 2, .max = 6 },
	.p2 = { .dot_limit = 225000,
		.p2_slow = 7, .p2_fast = 7 },
};

static const struct intel_limit intel_limits_vlv = {
	 /*
	  * These are the data rate limits (measured in fast clocks)
	  * since those are the strictest limits we have. The fast
	  * clock and actual rate limits are more relaxed, so checking
	  * them would make no difference.
	  */
	.dot = { .min = 25000 * 5, .max = 270000 * 5 },
	.vco = { .min = 4000000, .max = 6000000 },
	.n = { .min = 1, .max = 7 },
	.m1 = { .min = 2, .max = 3 },
	.m2 = { .min = 11, .max = 156 },
	.p1 = { .min = 2, .max = 3 },
	.p2 = { .p2_slow = 2, .p2_fast = 20 }, /* slow=min, fast=max */
};

static const struct intel_limit intel_limits_chv = {
	/*
	 * These are the data rate limits (measured in fast clocks)
	 * since those are the strictest limits we have.  The fast
	 * clock and actual rate limits are more relaxed, so checking
	 * them would make no difference.
	 */
	.dot = { .min = 25000 * 5, .max = 540000 * 5},
	.vco = { .min = 4800000, .max = 6480000 },
	.n = { .min = 1, .max = 1 },
	.m1 = { .min = 2, .max = 2 },
	.m2 = { .min = 24 << 22, .max = 175 << 22 },
	.p1 = { .min = 2, .max = 4 },
	.p2 = {	.p2_slow = 1, .p2_fast = 14 },
};

static const struct intel_limit intel_limits_bxt = {
	/* FIXME: find real dot limits */
	.dot = { .min = 0, .max = INT_MAX },
	.vco = { .min = 4800000, .max = 6700000 },
	.n = { .min = 1, .max = 1 },
	.m1 = { .min = 2, .max = 2 },
	/* FIXME: find real m2 limits */
	.m2 = { .min = 2 << 22, .max = 255 << 22 },
	.p1 = { .min = 2, .max = 4 },
	.p2 = { .p2_slow = 1, .p2_fast = 20 },
};

/* WA Display #0827: Gen9:all */
static void
skl_wa_827(struct drm_i915_private *dev_priv, enum pipe pipe, bool enable)
{
	if (enable)
		intel_de_write(dev_priv, CLKGATE_DIS_PSL(pipe),
		               intel_de_read(dev_priv, CLKGATE_DIS_PSL(pipe)) | DUPS1_GATING_DIS | DUPS2_GATING_DIS);
	else
		intel_de_write(dev_priv, CLKGATE_DIS_PSL(pipe),
		               intel_de_read(dev_priv, CLKGATE_DIS_PSL(pipe)) & ~(DUPS1_GATING_DIS | DUPS2_GATING_DIS));
}

/* Wa_2006604312:icl,ehl */
static void
icl_wa_scalerclkgating(struct drm_i915_private *dev_priv, enum pipe pipe,
		       bool enable)
{
	if (enable)
		intel_de_write(dev_priv, CLKGATE_DIS_PSL(pipe),
		               intel_de_read(dev_priv, CLKGATE_DIS_PSL(pipe)) | DPFR_GATING_DIS);
	else
		intel_de_write(dev_priv, CLKGATE_DIS_PSL(pipe),
		               intel_de_read(dev_priv, CLKGATE_DIS_PSL(pipe)) & ~DPFR_GATING_DIS);
}

static bool
needs_modeset(const struct intel_crtc_state *state)
{
	return drm_atomic_crtc_needs_modeset(&state->uapi);
}

static bool
is_trans_port_sync_slave(const struct intel_crtc_state *crtc_state)
{
	return crtc_state->master_transcoder != INVALID_TRANSCODER;
}

static bool
is_trans_port_sync_master(const struct intel_crtc_state *crtc_state)
{
	return crtc_state->sync_mode_slaves_mask != 0;
}

bool
is_trans_port_sync_mode(const struct intel_crtc_state *crtc_state)
{
	return is_trans_port_sync_master(crtc_state) ||
		is_trans_port_sync_slave(crtc_state);
}

/*
 * Platform specific helpers to calculate the port PLL loopback- (clock.m),
 * and post-divider (clock.p) values, pre- (clock.vco) and post-divided fast
 * (clock.dot) clock rates. This fast dot clock is fed to the port's IO logic.
 * The helpers' return value is the rate of the clock that is fed to the
 * display engine's pipe which can be the above fast dot clock rate or a
 * divided-down version of it.
 */
/* m1 is reserved as 0 in Pineview, n is a ring counter */
static int pnv_calc_dpll_params(int refclk, struct dpll *clock)
{
	clock->m = clock->m2 + 2;
	clock->p = clock->p1 * clock->p2;
	if (WARN_ON(clock->n == 0 || clock->p == 0))
		return 0;
	clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
	clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);

	return clock->dot;
}

static u32 i9xx_dpll_compute_m(struct dpll *dpll)
{
	return 5 * (dpll->m1 + 2) + (dpll->m2 + 2);
}

static int i9xx_calc_dpll_params(int refclk, struct dpll *clock)
{
	clock->m = i9xx_dpll_compute_m(clock);
	clock->p = clock->p1 * clock->p2;
	if (WARN_ON(clock->n + 2 == 0 || clock->p == 0))
		return 0;
	clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n + 2);
	clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);

	return clock->dot;
}

static int vlv_calc_dpll_params(int refclk, struct dpll *clock)
{
	clock->m = clock->m1 * clock->m2;
	clock->p = clock->p1 * clock->p2;
	if (WARN_ON(clock->n == 0 || clock->p == 0))
		return 0;
	clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
	clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);

	return clock->dot / 5;
}

int chv_calc_dpll_params(int refclk, struct dpll *clock)
{
	clock->m = clock->m1 * clock->m2;
	clock->p = clock->p1 * clock->p2;
	if (WARN_ON(clock->n == 0 || clock->p == 0))
		return 0;
	clock->vco = DIV_ROUND_CLOSEST_ULL(mul_u32_u32(refclk, clock->m),
					   clock->n << 22);
	clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);

	return clock->dot / 5;
}

/*
 * Returns whether the given set of divisors are valid for a given refclk with
 * the given connectors.
 */
static bool intel_pll_is_valid(struct drm_i915_private *dev_priv,
			       const struct intel_limit *limit,
			       const struct dpll *clock)
{
	if (clock->n < limit->n.min || limit->n.max < clock->n)
		return false;
	if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
		return false;
	if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2)
		return false;
	if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1)
		return false;

	if (!IS_PINEVIEW(dev_priv) && !IS_VALLEYVIEW(dev_priv) &&
	    !IS_CHERRYVIEW(dev_priv) && !IS_GEN9_LP(dev_priv))
		if (clock->m1 <= clock->m2)
			return false;

	if (!IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv) &&
	    !IS_GEN9_LP(dev_priv)) {
		if (clock->p < limit->p.min || limit->p.max < clock->p)
			return false;
		if (clock->m < limit->m.min || limit->m.max < clock->m)
			return false;
	}

	if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
		return false;
	/* XXX: We may need to be checking "Dot clock" depending on the multiplier,
	 * connector, etc., rather than just a single range.
	 */
	if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
		return false;

	return true;
}

static int
i9xx_select_p2_div(const struct intel_limit *limit,
		   const struct intel_crtc_state *crtc_state,
		   int target)
{
	struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);

	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
		/*
		 * For LVDS just rely on its current settings for dual-channel.
		 * We haven't figured out how to reliably set up different
		 * single/dual channel state, if we even can.
		 */
		if (intel_is_dual_link_lvds(dev_priv))
			return limit->p2.p2_fast;
		else
			return limit->p2.p2_slow;
	} else {
		if (target < limit->p2.dot_limit)
			return limit->p2.p2_slow;
		else
			return limit->p2.p2_fast;
	}
}

/*
 * Returns a set of divisors for the desired target clock with the given
 * refclk, or FALSE.  The returned values represent the clock equation:
 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
 *
 * Target and reference clocks are specified in kHz.
 *
 * If match_clock is provided, then best_clock P divider must match the P
 * divider from @match_clock used for LVDS downclocking.
 */
static bool
i9xx_find_best_dpll(const struct intel_limit *limit,
		    struct intel_crtc_state *crtc_state,
		    int target, int refclk, struct dpll *match_clock,
		    struct dpll *best_clock)
{
	struct drm_device *dev = crtc_state->uapi.crtc->dev;
	struct dpll clock;
	int err = target;

	memset(best_clock, 0, sizeof(*best_clock));

	clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);

	for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
	     clock.m1++) {
		for (clock.m2 = limit->m2.min;
		     clock.m2 <= limit->m2.max; clock.m2++) {
			if (clock.m2 >= clock.m1)
				break;
			for (clock.n = limit->n.min;
			     clock.n <= limit->n.max; clock.n++) {
				for (clock.p1 = limit->p1.min;
					clock.p1 <= limit->p1.max; clock.p1++) {
					int this_err;

					i9xx_calc_dpll_params(refclk, &clock);
					if (!intel_pll_is_valid(to_i915(dev),
								limit,
								&clock))
						continue;
					if (match_clock &&
					    clock.p != match_clock->p)
						continue;

					this_err = abs(clock.dot - target);
					if (this_err < err) {
						*best_clock = clock;
						err = this_err;
					}
				}
			}
		}
	}

	return (err != target);
}

/*
 * Returns a set of divisors for the desired target clock with the given
 * refclk, or FALSE.  The returned values represent the clock equation:
 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
 *
 * Target and reference clocks are specified in kHz.
 *
 * If match_clock is provided, then best_clock P divider must match the P
 * divider from @match_clock used for LVDS downclocking.
 */
static bool
pnv_find_best_dpll(const struct intel_limit *limit,
		   struct intel_crtc_state *crtc_state,
		   int target, int refclk, struct dpll *match_clock,
		   struct dpll *best_clock)
{
	struct drm_device *dev = crtc_state->uapi.crtc->dev;
	struct dpll clock;
	int err = target;

	memset(best_clock, 0, sizeof(*best_clock));

	clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);

	for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
	     clock.m1++) {
		for (clock.m2 = limit->m2.min;
		     clock.m2 <= limit->m2.max; clock.m2++) {
			for (clock.n = limit->n.min;
			     clock.n <= limit->n.max; clock.n++) {
				for (clock.p1 = limit->p1.min;
					clock.p1 <= limit->p1.max; clock.p1++) {
					int this_err;

					pnv_calc_dpll_params(refclk, &clock);
					if (!intel_pll_is_valid(to_i915(dev),
								limit,
								&clock))
						continue;
					if (match_clock &&
					    clock.p != match_clock->p)
						continue;

					this_err = abs(clock.dot - target);
					if (this_err < err) {
						*best_clock = clock;
						err = this_err;
					}
				}
			}
		}
	}

	return (err != target);
}

/*
 * Returns a set of divisors for the desired target clock with the given
 * refclk, or FALSE.  The returned values represent the clock equation:
 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
 *
 * Target and reference clocks are specified in kHz.
 *
 * If match_clock is provided, then best_clock P divider must match the P
 * divider from @match_clock used for LVDS downclocking.
 */
static bool
g4x_find_best_dpll(const struct intel_limit *limit,
		   struct intel_crtc_state *crtc_state,
		   int target, int refclk, struct dpll *match_clock,
		   struct dpll *best_clock)
{
	struct drm_device *dev = crtc_state->uapi.crtc->dev;
	struct dpll clock;
	int max_n;
	bool found = false;
	/* approximately equals target * 0.00585 */
	int err_most = (target >> 8) + (target >> 9);

	memset(best_clock, 0, sizeof(*best_clock));

	clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);

	max_n = limit->n.max;
	/* based on hardware requirement, prefer smaller n to precision */
	for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
		/* based on hardware requirement, prefere larger m1,m2 */
		for (clock.m1 = limit->m1.max;
		     clock.m1 >= limit->m1.min; clock.m1--) {
			for (clock.m2 = limit->m2.max;
			     clock.m2 >= limit->m2.min; clock.m2--) {
				for (clock.p1 = limit->p1.max;
				     clock.p1 >= limit->p1.min; clock.p1--) {
					int this_err;

					i9xx_calc_dpll_params(refclk, &clock);
					if (!intel_pll_is_valid(to_i915(dev),
								limit,
								&clock))
						continue;

					this_err = abs(clock.dot - target);
					if (this_err < err_most) {
						*best_clock = clock;
						err_most = this_err;
						max_n = clock.n;
						found = true;
					}
				}
			}
		}
	}
	return found;
}

/*
 * Check if the calculated PLL configuration is more optimal compared to the
 * best configuration and error found so far. Return the calculated error.
 */
static bool vlv_PLL_is_optimal(struct drm_device *dev, int target_freq,
			       const struct dpll *calculated_clock,
			       const struct dpll *best_clock,
			       unsigned int best_error_ppm,
			       unsigned int *error_ppm)
{
	/*
	 * For CHV ignore the error and consider only the P value.
	 * Prefer a bigger P value based on HW requirements.
	 */
	if (IS_CHERRYVIEW(to_i915(dev))) {
		*error_ppm = 0;

		return calculated_clock->p > best_clock->p;
	}

	if (drm_WARN_ON_ONCE(dev, !target_freq))
		return false;

	*error_ppm = div_u64(1000000ULL *
				abs(target_freq - calculated_clock->dot),
			     target_freq);
	/*
	 * Prefer a better P value over a better (smaller) error if the error
	 * is small. Ensure this preference for future configurations too by
	 * setting the error to 0.
	 */
	if (*error_ppm < 100 && calculated_clock->p > best_clock->p) {
		*error_ppm = 0;

		return true;
	}

	return *error_ppm + 10 < best_error_ppm;
}

/*
 * Returns a set of divisors for the desired target clock with the given
 * refclk, or FALSE.  The returned values represent the clock equation:
 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
 */
static bool
vlv_find_best_dpll(const struct intel_limit *limit,
		   struct intel_crtc_state *crtc_state,
		   int target, int refclk, struct dpll *match_clock,
		   struct dpll *best_clock)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_device *dev = crtc->base.dev;
	struct dpll clock;
	unsigned int bestppm = 1000000;
	/* min update 19.2 MHz */
	int max_n = min(limit->n.max, refclk / 19200);
	bool found = false;

	target *= 5; /* fast clock */

	memset(best_clock, 0, sizeof(*best_clock));

	/* based on hardware requirement, prefer smaller n to precision */
	for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
		for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
			for (clock.p2 = limit->p2.p2_fast; clock.p2 >= limit->p2.p2_slow;
			     clock.p2 -= clock.p2 > 10 ? 2 : 1) {
				clock.p = clock.p1 * clock.p2;
				/* based on hardware requirement, prefer bigger m1,m2 values */
				for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
					unsigned int ppm;

					clock.m2 = DIV_ROUND_CLOSEST(target * clock.p * clock.n,
								     refclk * clock.m1);

					vlv_calc_dpll_params(refclk, &clock);

					if (!intel_pll_is_valid(to_i915(dev),
								limit,
								&clock))
						continue;

					if (!vlv_PLL_is_optimal(dev, target,
								&clock,
								best_clock,
								bestppm, &ppm))
						continue;

					*best_clock = clock;
					bestppm = ppm;
					found = true;
				}
			}
		}
	}

	return found;
}

/*
 * Returns a set of divisors for the desired target clock with the given
 * refclk, or FALSE.  The returned values represent the clock equation:
 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
 */
static bool
chv_find_best_dpll(const struct intel_limit *limit,
		   struct intel_crtc_state *crtc_state,
		   int target, int refclk, struct dpll *match_clock,
		   struct dpll *best_clock)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_device *dev = crtc->base.dev;
	unsigned int best_error_ppm;
	struct dpll clock;
	u64 m2;
	int found = false;

	memset(best_clock, 0, sizeof(*best_clock));
	best_error_ppm = 1000000;

	/*
	 * Based on hardware doc, the n always set to 1, and m1 always
	 * set to 2.  If requires to support 200Mhz refclk, we need to
	 * revisit this because n may not 1 anymore.
	 */
	clock.n = 1, clock.m1 = 2;
	target *= 5;	/* fast clock */

	for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
		for (clock.p2 = limit->p2.p2_fast;
				clock.p2 >= limit->p2.p2_slow;
				clock.p2 -= clock.p2 > 10 ? 2 : 1) {
			unsigned int error_ppm;

			clock.p = clock.p1 * clock.p2;

			m2 = DIV_ROUND_CLOSEST_ULL(mul_u32_u32(target, clock.p * clock.n) << 22,
						   refclk * clock.m1);

			if (m2 > INT_MAX/clock.m1)
				continue;

			clock.m2 = m2;

			chv_calc_dpll_params(refclk, &clock);

			if (!intel_pll_is_valid(to_i915(dev), limit, &clock))
				continue;

			if (!vlv_PLL_is_optimal(dev, target, &clock, best_clock,
						best_error_ppm, &error_ppm))
				continue;

			*best_clock = clock;
			best_error_ppm = error_ppm;
			found = true;
		}
	}

	return found;
}

bool bxt_find_best_dpll(struct intel_crtc_state *crtc_state,
			struct dpll *best_clock)
{
	int refclk = 100000;
	const struct intel_limit *limit = &intel_limits_bxt;

	return chv_find_best_dpll(limit, crtc_state,
				  crtc_state->port_clock, refclk,
				  NULL, best_clock);
}

static bool pipe_scanline_is_moving(struct drm_i915_private *dev_priv,
				    enum pipe pipe)
{
	i915_reg_t reg = PIPEDSL(pipe);
	u32 line1, line2;
	u32 line_mask;

	if (IS_GEN(dev_priv, 2))
		line_mask = DSL_LINEMASK_GEN2;
	else
		line_mask = DSL_LINEMASK_GEN3;

	line1 = intel_de_read(dev_priv, reg) & line_mask;
	msleep(5);
	line2 = intel_de_read(dev_priv, reg) & line_mask;

	return line1 != line2;
}

static void wait_for_pipe_scanline_moving(struct intel_crtc *crtc, bool state)
{
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	enum pipe pipe = crtc->pipe;

	/* Wait for the display line to settle/start moving */
	if (wait_for(pipe_scanline_is_moving(dev_priv, pipe) == state, 100))
		drm_err(&dev_priv->drm,
			"pipe %c scanline %s wait timed out\n",
			pipe_name(pipe), onoff(state));
}

static void intel_wait_for_pipe_scanline_stopped(struct intel_crtc *crtc)
{
	wait_for_pipe_scanline_moving(crtc, false);
}

static void intel_wait_for_pipe_scanline_moving(struct intel_crtc *crtc)
{
	wait_for_pipe_scanline_moving(crtc, true);
}

static void
intel_wait_for_pipe_off(const struct intel_crtc_state *old_crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);

	if (INTEL_GEN(dev_priv) >= 4) {
		enum transcoder cpu_transcoder = old_crtc_state->cpu_transcoder;
		i915_reg_t reg = PIPECONF(cpu_transcoder);

		/* Wait for the Pipe State to go off */
		if (intel_de_wait_for_clear(dev_priv, reg,
					    I965_PIPECONF_ACTIVE, 100))
			drm_WARN(&dev_priv->drm, 1,
				 "pipe_off wait timed out\n");
	} else {
		intel_wait_for_pipe_scanline_stopped(crtc);
	}
}

/* Only for pre-ILK configs */
void assert_pll(struct drm_i915_private *dev_priv,
		enum pipe pipe, bool state)
{
	u32 val;
	bool cur_state;

	val = intel_de_read(dev_priv, DPLL(pipe));
	cur_state = !!(val & DPLL_VCO_ENABLE);
	I915_STATE_WARN(cur_state != state,
	     "PLL state assertion failure (expected %s, current %s)\n",
			onoff(state), onoff(cur_state));
}

/* XXX: the dsi pll is shared between MIPI DSI ports */
void assert_dsi_pll(struct drm_i915_private *dev_priv, bool state)
{
	u32 val;
	bool cur_state;

	vlv_cck_get(dev_priv);
	val = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL);
	vlv_cck_put(dev_priv);

	cur_state = val & DSI_PLL_VCO_EN;
	I915_STATE_WARN(cur_state != state,
	     "DSI PLL state assertion failure (expected %s, current %s)\n",
			onoff(state), onoff(cur_state));
}

static void assert_fdi_tx(struct drm_i915_private *dev_priv,
			  enum pipe pipe, bool state)
{
	bool cur_state;

	if (HAS_DDI(dev_priv)) {
		/*
		 * DDI does not have a specific FDI_TX register.
		 *
		 * FDI is never fed from EDP transcoder
		 * so pipe->transcoder cast is fine here.
		 */
		enum transcoder cpu_transcoder = (enum transcoder)pipe;
		u32 val = intel_de_read(dev_priv,
					TRANS_DDI_FUNC_CTL(cpu_transcoder));
		cur_state = !!(val & TRANS_DDI_FUNC_ENABLE);
	} else {
		u32 val = intel_de_read(dev_priv, FDI_TX_CTL(pipe));
		cur_state = !!(val & FDI_TX_ENABLE);
	}
	I915_STATE_WARN(cur_state != state,
	     "FDI TX state assertion failure (expected %s, current %s)\n",
			onoff(state), onoff(cur_state));
}
#define assert_fdi_tx_enabled(d, p) assert_fdi_tx(d, p, true)
#define assert_fdi_tx_disabled(d, p) assert_fdi_tx(d, p, false)

static void assert_fdi_rx(struct drm_i915_private *dev_priv,
			  enum pipe pipe, bool state)
{
	u32 val;
	bool cur_state;

	val = intel_de_read(dev_priv, FDI_RX_CTL(pipe));
	cur_state = !!(val & FDI_RX_ENABLE);
	I915_STATE_WARN(cur_state != state,
	     "FDI RX state assertion failure (expected %s, current %s)\n",
			onoff(state), onoff(cur_state));
}
#define assert_fdi_rx_enabled(d, p) assert_fdi_rx(d, p, true)
#define assert_fdi_rx_disabled(d, p) assert_fdi_rx(d, p, false)

static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
				      enum pipe pipe)
{
	u32 val;

	/* ILK FDI PLL is always enabled */
	if (IS_GEN(dev_priv, 5))
		return;

	/* On Haswell, DDI ports are responsible for the FDI PLL setup */
	if (HAS_DDI(dev_priv))
		return;

	val = intel_de_read(dev_priv, FDI_TX_CTL(pipe));
	I915_STATE_WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
}

void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
		       enum pipe pipe, bool state)
{
	u32 val;
	bool cur_state;

	val = intel_de_read(dev_priv, FDI_RX_CTL(pipe));
	cur_state = !!(val & FDI_RX_PLL_ENABLE);
	I915_STATE_WARN(cur_state != state,
	     "FDI RX PLL assertion failure (expected %s, current %s)\n",
			onoff(state), onoff(cur_state));
}

void assert_panel_unlocked(struct drm_i915_private *dev_priv, enum pipe pipe)
{
	i915_reg_t pp_reg;
	u32 val;
	enum pipe panel_pipe = INVALID_PIPE;
	bool locked = true;

	if (drm_WARN_ON(&dev_priv->drm, HAS_DDI(dev_priv)))
		return;

	if (HAS_PCH_SPLIT(dev_priv)) {
		u32 port_sel;

		pp_reg = PP_CONTROL(0);
		port_sel = intel_de_read(dev_priv, PP_ON_DELAYS(0)) & PANEL_PORT_SELECT_MASK;

		switch (port_sel) {
		case PANEL_PORT_SELECT_LVDS:
			intel_lvds_port_enabled(dev_priv, PCH_LVDS, &panel_pipe);
			break;
		case PANEL_PORT_SELECT_DPA:
			intel_dp_port_enabled(dev_priv, DP_A, PORT_A, &panel_pipe);
			break;
		case PANEL_PORT_SELECT_DPC:
			intel_dp_port_enabled(dev_priv, PCH_DP_C, PORT_C, &panel_pipe);
			break;
		case PANEL_PORT_SELECT_DPD:
			intel_dp_port_enabled(dev_priv, PCH_DP_D, PORT_D, &panel_pipe);
			break;
		default:
			MISSING_CASE(port_sel);
			break;
		}
	} else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
		/* presumably write lock depends on pipe, not port select */
		pp_reg = PP_CONTROL(pipe);
		panel_pipe = pipe;
	} else {
		u32 port_sel;

		pp_reg = PP_CONTROL(0);
		port_sel = intel_de_read(dev_priv, PP_ON_DELAYS(0)) & PANEL_PORT_SELECT_MASK;

		drm_WARN_ON(&dev_priv->drm,
			    port_sel != PANEL_PORT_SELECT_LVDS);
		intel_lvds_port_enabled(dev_priv, LVDS, &panel_pipe);
	}

	val = intel_de_read(dev_priv, pp_reg);
	if (!(val & PANEL_POWER_ON) ||
	    ((val & PANEL_UNLOCK_MASK) == PANEL_UNLOCK_REGS))
		locked = false;

	I915_STATE_WARN(panel_pipe == pipe && locked,
	     "panel assertion failure, pipe %c regs locked\n",
	     pipe_name(pipe));
}

void assert_pipe(struct drm_i915_private *dev_priv,
		 enum transcoder cpu_transcoder, bool state)
{
	bool cur_state;
	enum intel_display_power_domain power_domain;
	intel_wakeref_t wakeref;

	/* we keep both pipes enabled on 830 */
	if (IS_I830(dev_priv))
		state = true;

	power_domain = POWER_DOMAIN_TRANSCODER(cpu_transcoder);
	wakeref = intel_display_power_get_if_enabled(dev_priv, power_domain);
	if (wakeref) {
		u32 val = intel_de_read(dev_priv, PIPECONF(cpu_transcoder));
		cur_state = !!(val & PIPECONF_ENABLE);

		intel_display_power_put(dev_priv, power_domain, wakeref);
	} else {
		cur_state = false;
	}

	I915_STATE_WARN(cur_state != state,
			"transcoder %s assertion failure (expected %s, current %s)\n",
			transcoder_name(cpu_transcoder),
			onoff(state), onoff(cur_state));
}

static void assert_plane(struct intel_plane *plane, bool state)
{
	enum pipe pipe;
	bool cur_state;

	cur_state = plane->get_hw_state(plane, &pipe);

	I915_STATE_WARN(cur_state != state,
			"%s assertion failure (expected %s, current %s)\n",
			plane->base.name, onoff(state), onoff(cur_state));
}

#define assert_plane_enabled(p) assert_plane(p, true)
#define assert_plane_disabled(p) assert_plane(p, false)

static void assert_planes_disabled(struct intel_crtc *crtc)
{
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	struct intel_plane *plane;

	for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, plane)
		assert_plane_disabled(plane);
}

static void assert_vblank_disabled(struct drm_crtc *crtc)
{
	if (I915_STATE_WARN_ON(drm_crtc_vblank_get(crtc) == 0))
		drm_crtc_vblank_put(crtc);
}

void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
				    enum pipe pipe)
{
	u32 val;
	bool enabled;

	val = intel_de_read(dev_priv, PCH_TRANSCONF(pipe));
	enabled = !!(val & TRANS_ENABLE);
	I915_STATE_WARN(enabled,
	     "transcoder assertion failed, should be off on pipe %c but is still active\n",
	     pipe_name(pipe));
}

static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
				   enum pipe pipe, enum port port,
				   i915_reg_t dp_reg)
{
	enum pipe port_pipe;
	bool state;

	state = intel_dp_port_enabled(dev_priv, dp_reg, port, &port_pipe);

	I915_STATE_WARN(state && port_pipe == pipe,
			"PCH DP %c enabled on transcoder %c, should be disabled\n",
			port_name(port), pipe_name(pipe));

	I915_STATE_WARN(HAS_PCH_IBX(dev_priv) && !state && port_pipe == PIPE_B,
			"IBX PCH DP %c still using transcoder B\n",
			port_name(port));
}

static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
				     enum pipe pipe, enum port port,
				     i915_reg_t hdmi_reg)
{
	enum pipe port_pipe;
	bool state;

	state = intel_sdvo_port_enabled(dev_priv, hdmi_reg, &port_pipe);

	I915_STATE_WARN(state && port_pipe == pipe,
			"PCH HDMI %c enabled on transcoder %c, should be disabled\n",
			port_name(port), pipe_name(pipe));

	I915_STATE_WARN(HAS_PCH_IBX(dev_priv) && !state && port_pipe == PIPE_B,
			"IBX PCH HDMI %c still using transcoder B\n",
			port_name(port));
}

static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
				      enum pipe pipe)
{
	enum pipe port_pipe;

	assert_pch_dp_disabled(dev_priv, pipe, PORT_B, PCH_DP_B);
	assert_pch_dp_disabled(dev_priv, pipe, PORT_C, PCH_DP_C);
	assert_pch_dp_disabled(dev_priv, pipe, PORT_D, PCH_DP_D);

	I915_STATE_WARN(intel_crt_port_enabled(dev_priv, PCH_ADPA, &port_pipe) &&
			port_pipe == pipe,
			"PCH VGA enabled on transcoder %c, should be disabled\n",
			pipe_name(pipe));

	I915_STATE_WARN(intel_lvds_port_enabled(dev_priv, PCH_LVDS, &port_pipe) &&
			port_pipe == pipe,
			"PCH LVDS enabled on transcoder %c, should be disabled\n",
			pipe_name(pipe));

	/* PCH SDVOB multiplex with HDMIB */
	assert_pch_hdmi_disabled(dev_priv, pipe, PORT_B, PCH_HDMIB);
	assert_pch_hdmi_disabled(dev_priv, pipe, PORT_C, PCH_HDMIC);
	assert_pch_hdmi_disabled(dev_priv, pipe, PORT_D, PCH_HDMID);
}

static void _vlv_enable_pll(struct intel_crtc *crtc,
			    const struct intel_crtc_state *pipe_config)
{
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	enum pipe pipe = crtc->pipe;

	intel_de_write(dev_priv, DPLL(pipe), pipe_config->dpll_hw_state.dpll);
	intel_de_posting_read(dev_priv, DPLL(pipe));
	udelay(150);

	if (intel_de_wait_for_set(dev_priv, DPLL(pipe), DPLL_LOCK_VLV, 1))
		drm_err(&dev_priv->drm, "DPLL %d failed to lock\n", pipe);
}

static void vlv_enable_pll(struct intel_crtc *crtc,
			   const struct intel_crtc_state *pipe_config)
{
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	enum pipe pipe = crtc->pipe;

	assert_pipe_disabled(dev_priv, pipe_config->cpu_transcoder);

	/* PLL is protected by panel, make sure we can write it */
	assert_panel_unlocked(dev_priv, pipe);

	if (pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE)
		_vlv_enable_pll(crtc, pipe_config);

	intel_de_write(dev_priv, DPLL_MD(pipe),
		       pipe_config->dpll_hw_state.dpll_md);
	intel_de_posting_read(dev_priv, DPLL_MD(pipe));
}


static void _chv_enable_pll(struct intel_crtc *crtc,
			    const struct intel_crtc_state *pipe_config)
{
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	enum pipe pipe = crtc->pipe;
	enum dpio_channel port = vlv_pipe_to_channel(pipe);
	u32 tmp;

	vlv_dpio_get(dev_priv);

	/* Enable back the 10bit clock to display controller */
	tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port));
	tmp |= DPIO_DCLKP_EN;
	vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), tmp);

	vlv_dpio_put(dev_priv);

	/*
	 * Need to wait > 100ns between dclkp clock enable bit and PLL enable.
	 */
	udelay(1);

	/* Enable PLL */
	intel_de_write(dev_priv, DPLL(pipe), pipe_config->dpll_hw_state.dpll);

	/* Check PLL is locked */
	if (intel_de_wait_for_set(dev_priv, DPLL(pipe), DPLL_LOCK_VLV, 1))
		drm_err(&dev_priv->drm, "PLL %d failed to lock\n", pipe);
}

static void chv_enable_pll(struct intel_crtc *crtc,
			   const struct intel_crtc_state *pipe_config)
{
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	enum pipe pipe = crtc->pipe;

	assert_pipe_disabled(dev_priv, pipe_config->cpu_transcoder);

	/* PLL is protected by panel, make sure we can write it */
	assert_panel_unlocked(dev_priv, pipe);

	if (pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE)
		_chv_enable_pll(crtc, pipe_config);

	if (pipe != PIPE_A) {
		/*
		 * WaPixelRepeatModeFixForC0:chv
		 *
		 * DPLLCMD is AWOL. Use chicken bits to propagate
		 * the value from DPLLBMD to either pipe B or C.
		 */
		intel_de_write(dev_priv, CBR4_VLV, CBR_DPLLBMD_PIPE(pipe));
		intel_de_write(dev_priv, DPLL_MD(PIPE_B),
			       pipe_config->dpll_hw_state.dpll_md);
		intel_de_write(dev_priv, CBR4_VLV, 0);
		dev_priv->chv_dpll_md[pipe] = pipe_config->dpll_hw_state.dpll_md;

		/*
		 * DPLLB VGA mode also seems to cause problems.
		 * We should always have it disabled.
		 */
		drm_WARN_ON(&dev_priv->drm,
			    (intel_de_read(dev_priv, DPLL(PIPE_B)) &
			     DPLL_VGA_MODE_DIS) == 0);
	} else {
		intel_de_write(dev_priv, DPLL_MD(pipe),
			       pipe_config->dpll_hw_state.dpll_md);
		intel_de_posting_read(dev_priv, DPLL_MD(pipe));
	}
}

static bool i9xx_has_pps(struct drm_i915_private *dev_priv)
{
	if (IS_I830(dev_priv))
		return false;

	return IS_PINEVIEW(dev_priv) || IS_MOBILE(dev_priv);
}

static void i9xx_enable_pll(struct intel_crtc *crtc,
			    const struct intel_crtc_state *crtc_state)
{
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	i915_reg_t reg = DPLL(crtc->pipe);
	u32 dpll = crtc_state->dpll_hw_state.dpll;
	int i;

	assert_pipe_disabled(dev_priv, crtc_state->cpu_transcoder);

	/* PLL is protected by panel, make sure we can write it */
	if (i9xx_has_pps(dev_priv))
		assert_panel_unlocked(dev_priv, crtc->pipe);

	/*
	 * Apparently we need to have VGA mode enabled prior to changing
	 * the P1/P2 dividers. Otherwise the DPLL will keep using the old
	 * dividers, even though the register value does change.
	 */
	intel_de_write(dev_priv, reg, dpll & ~DPLL_VGA_MODE_DIS);
	intel_de_write(dev_priv, reg, dpll);

	/* Wait for the clocks to stabilize. */
	intel_de_posting_read(dev_priv, reg);
	udelay(150);

	if (INTEL_GEN(dev_priv) >= 4) {
		intel_de_write(dev_priv, DPLL_MD(crtc->pipe),
			       crtc_state->dpll_hw_state.dpll_md);
	} else {
		/* The pixel multiplier can only be updated once the
		 * DPLL is enabled and the clocks are stable.
		 *
		 * So write it again.
		 */
		intel_de_write(dev_priv, reg, dpll);
	}

	/* We do this three times for luck */
	for (i = 0; i < 3; i++) {
		intel_de_write(dev_priv, reg, dpll);
		intel_de_posting_read(dev_priv, reg);
		udelay(150); /* wait for warmup */
	}
}

static void i9xx_disable_pll(const struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	enum pipe pipe = crtc->pipe;

	/* Don't disable pipe or pipe PLLs if needed */
	if (IS_I830(dev_priv))
		return;

	/* Make sure the pipe isn't still relying on us */
	assert_pipe_disabled(dev_priv, crtc_state->cpu_transcoder);

	intel_de_write(dev_priv, DPLL(pipe), DPLL_VGA_MODE_DIS);
	intel_de_posting_read(dev_priv, DPLL(pipe));
}

static void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
{
	u32 val;

	/* Make sure the pipe isn't still relying on us */
	assert_pipe_disabled(dev_priv, (enum transcoder)pipe);

	val = DPLL_INTEGRATED_REF_CLK_VLV |
		DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
	if (pipe != PIPE_A)
		val |= DPLL_INTEGRATED_CRI_CLK_VLV;

	intel_de_write(dev_priv, DPLL(pipe), val);
	intel_de_posting_read(dev_priv, DPLL(pipe));
}

static void chv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
{
	enum dpio_channel port = vlv_pipe_to_channel(pipe);
	u32 val;

	/* Make sure the pipe isn't still relying on us */
	assert_pipe_disabled(dev_priv, (enum transcoder)pipe);

	val = DPLL_SSC_REF_CLK_CHV |
		DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
	if (pipe != PIPE_A)
		val |= DPLL_INTEGRATED_CRI_CLK_VLV;

	intel_de_write(dev_priv, DPLL(pipe), val);
	intel_de_posting_read(dev_priv, DPLL(pipe));

	vlv_dpio_get(dev_priv);

	/* Disable 10bit clock to display controller */
	val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port));
	val &= ~DPIO_DCLKP_EN;
	vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), val);

	vlv_dpio_put(dev_priv);
}

void vlv_wait_port_ready(struct drm_i915_private *dev_priv,
			 struct intel_digital_port *dig_port,
			 unsigned int expected_mask)
{
	u32 port_mask;
	i915_reg_t dpll_reg;

	switch (dig_port->base.port) {
	case PORT_B:
		port_mask = DPLL_PORTB_READY_MASK;
		dpll_reg = DPLL(0);
		break;
	case PORT_C:
		port_mask = DPLL_PORTC_READY_MASK;
		dpll_reg = DPLL(0);
		expected_mask <<= 4;
		break;
	case PORT_D:
		port_mask = DPLL_PORTD_READY_MASK;
		dpll_reg = DPIO_PHY_STATUS;
		break;
	default:
		BUG();
	}

	if (intel_de_wait_for_register(dev_priv, dpll_reg,
				       port_mask, expected_mask, 1000))
		drm_WARN(&dev_priv->drm, 1,
			 "timed out waiting for [ENCODER:%d:%s] port ready: got 0x%x, expected 0x%x\n",
			 dig_port->base.base.base.id, dig_port->base.base.name,
			 intel_de_read(dev_priv, dpll_reg) & port_mask,
			 expected_mask);
}

static void ilk_enable_pch_transcoder(const struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	enum pipe pipe = crtc->pipe;
	i915_reg_t reg;
	u32 val, pipeconf_val;

	/* Make sure PCH DPLL is enabled */
	assert_shared_dpll_enabled(dev_priv, crtc_state->shared_dpll);

	/* FDI must be feeding us bits for PCH ports */
	assert_fdi_tx_enabled(dev_priv, pipe);
	assert_fdi_rx_enabled(dev_priv, pipe);

	if (HAS_PCH_CPT(dev_priv)) {
		reg = TRANS_CHICKEN2(pipe);
		val = intel_de_read(dev_priv, reg);
		/*
		 * Workaround: Set the timing override bit
		 * before enabling the pch transcoder.
		 */
		val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
		/* Configure frame start delay to match the CPU */
		val &= ~TRANS_CHICKEN2_FRAME_START_DELAY_MASK;
		val |= TRANS_CHICKEN2_FRAME_START_DELAY(0);
		intel_de_write(dev_priv, reg, val);
	}

	reg = PCH_TRANSCONF(pipe);
	val = intel_de_read(dev_priv, reg);
	pipeconf_val = intel_de_read(dev_priv, PIPECONF(pipe));

	if (HAS_PCH_IBX(dev_priv)) {
		/* Configure frame start delay to match the CPU */
		val &= ~TRANS_FRAME_START_DELAY_MASK;
		val |= TRANS_FRAME_START_DELAY(0);

		/*
		 * Make the BPC in transcoder be consistent with
		 * that in pipeconf reg. For HDMI we must use 8bpc
		 * here for both 8bpc and 12bpc.
		 */
		val &= ~PIPECONF_BPC_MASK;
		if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI))
			val |= PIPECONF_8BPC;
		else
			val |= pipeconf_val & PIPECONF_BPC_MASK;
	}

	val &= ~TRANS_INTERLACE_MASK;
	if ((pipeconf_val & PIPECONF_INTERLACE_MASK) == PIPECONF_INTERLACED_ILK) {
		if (HAS_PCH_IBX(dev_priv) &&
		    intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO))
			val |= TRANS_LEGACY_INTERLACED_ILK;
		else
			val |= TRANS_INTERLACED;
	} else {
		val |= TRANS_PROGRESSIVE;
	}

	intel_de_write(dev_priv, reg, val | TRANS_ENABLE);
	if (intel_de_wait_for_set(dev_priv, reg, TRANS_STATE_ENABLE, 100))
		drm_err(&dev_priv->drm, "failed to enable transcoder %c\n",
			pipe_name(pipe));
}

static void lpt_enable_pch_transcoder(struct drm_i915_private *dev_priv,
				      enum transcoder cpu_transcoder)
{
	u32 val, pipeconf_val;

	/* FDI must be feeding us bits for PCH ports */
	assert_fdi_tx_enabled(dev_priv, (enum pipe) cpu_transcoder);
	assert_fdi_rx_enabled(dev_priv, PIPE_A);

	val = intel_de_read(dev_priv, TRANS_CHICKEN2(PIPE_A));
	/* Workaround: set timing override bit. */
	val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
	/* Configure frame start delay to match the CPU */
	val &= ~TRANS_CHICKEN2_FRAME_START_DELAY_MASK;
	val |= TRANS_CHICKEN2_FRAME_START_DELAY(0);
	intel_de_write(dev_priv, TRANS_CHICKEN2(PIPE_A), val);

	val = TRANS_ENABLE;
	pipeconf_val = intel_de_read(dev_priv, PIPECONF(cpu_transcoder));

	if ((pipeconf_val & PIPECONF_INTERLACE_MASK_HSW) ==
	    PIPECONF_INTERLACED_ILK)
		val |= TRANS_INTERLACED;
	else
		val |= TRANS_PROGRESSIVE;

	intel_de_write(dev_priv, LPT_TRANSCONF, val);
	if (intel_de_wait_for_set(dev_priv, LPT_TRANSCONF,
				  TRANS_STATE_ENABLE, 100))
		drm_err(&dev_priv->drm, "Failed to enable PCH transcoder\n");
}

static void ilk_disable_pch_transcoder(struct drm_i915_private *dev_priv,
				       enum pipe pipe)
{
	i915_reg_t reg;
	u32 val;

	/* FDI relies on the transcoder */
	assert_fdi_tx_disabled(dev_priv, pipe);
	assert_fdi_rx_disabled(dev_priv, pipe);

	/* Ports must be off as well */
	assert_pch_ports_disabled(dev_priv, pipe);

	reg = PCH_TRANSCONF(pipe);
	val = intel_de_read(dev_priv, reg);
	val &= ~TRANS_ENABLE;
	intel_de_write(dev_priv, reg, val);
	/* wait for PCH transcoder off, transcoder state */
	if (intel_de_wait_for_clear(dev_priv, reg, TRANS_STATE_ENABLE, 50))
		drm_err(&dev_priv->drm, "failed to disable transcoder %c\n",
			pipe_name(pipe));

	if (HAS_PCH_CPT(dev_priv)) {
		/* Workaround: Clear the timing override chicken bit again. */
		reg = TRANS_CHICKEN2(pipe);
		val = intel_de_read(dev_priv, reg);
		val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
		intel_de_write(dev_priv, reg, val);
	}
}

void lpt_disable_pch_transcoder(struct drm_i915_private *dev_priv)
{
	u32 val;

	val = intel_de_read(dev_priv, LPT_TRANSCONF);
	val &= ~TRANS_ENABLE;
	intel_de_write(dev_priv, LPT_TRANSCONF, val);
	/* wait for PCH transcoder off, transcoder state */
	if (intel_de_wait_for_clear(dev_priv, LPT_TRANSCONF,
				    TRANS_STATE_ENABLE, 50))
		drm_err(&dev_priv->drm, "Failed to disable PCH transcoder\n");

	/* Workaround: clear timing override bit. */
	val = intel_de_read(dev_priv, TRANS_CHICKEN2(PIPE_A));
	val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
	intel_de_write(dev_priv, TRANS_CHICKEN2(PIPE_A), val);
}

enum pipe intel_crtc_pch_transcoder(struct intel_crtc *crtc)
{
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);

	if (HAS_PCH_LPT(dev_priv))
		return PIPE_A;
	else
		return crtc->pipe;
}

static u32 intel_crtc_max_vblank_count(const struct intel_crtc_state *crtc_state)
{
	struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);

	/*
	 * On i965gm the hardware frame counter reads
	 * zero when the TV encoder is enabled :(
	 */
	if (IS_I965GM(dev_priv) &&
	    (crtc_state->output_types & BIT(INTEL_OUTPUT_TVOUT)))
		return 0;

	if (INTEL_GEN(dev_priv) >= 5 || IS_G4X(dev_priv))
		return 0xffffffff; /* full 32 bit counter */
	else if (INTEL_GEN(dev_priv) >= 3)
		return 0xffffff; /* only 24 bits of frame count */
	else
		return 0; /* Gen2 doesn't have a hardware frame counter */
}

void intel_crtc_vblank_on(const struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);

	assert_vblank_disabled(&crtc->base);
	drm_crtc_set_max_vblank_count(&crtc->base,
				      intel_crtc_max_vblank_count(crtc_state));
	drm_crtc_vblank_on(&crtc->base);
}

void intel_crtc_vblank_off(const struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);

	drm_crtc_vblank_off(&crtc->base);
	assert_vblank_disabled(&crtc->base);
}

void intel_enable_pipe(const struct intel_crtc_state *new_crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	enum transcoder cpu_transcoder = new_crtc_state->cpu_transcoder;
	enum pipe pipe = crtc->pipe;
	i915_reg_t reg;
	u32 val;

	drm_dbg_kms(&dev_priv->drm, "enabling pipe %c\n", pipe_name(pipe));

	assert_planes_disabled(crtc);

	/*
	 * A pipe without a PLL won't actually be able to drive bits from
	 * a plane.  On ILK+ the pipe PLLs are integrated, so we don't
	 * need the check.
	 */
	if (HAS_GMCH(dev_priv)) {
		if (intel_crtc_has_type(new_crtc_state, INTEL_OUTPUT_DSI))
			assert_dsi_pll_enabled(dev_priv);
		else
			assert_pll_enabled(dev_priv, pipe);
	} else {
		if (new_crtc_state->has_pch_encoder) {
			/* if driving the PCH, we need FDI enabled */
			assert_fdi_rx_pll_enabled(dev_priv,
						  intel_crtc_pch_transcoder(crtc));
			assert_fdi_tx_pll_enabled(dev_priv,
						  (enum pipe) cpu_transcoder);
		}
		/* FIXME: assert CPU port conditions for SNB+ */
	}

	trace_intel_pipe_enable(crtc);

	reg = PIPECONF(cpu_transcoder);
	val = intel_de_read(dev_priv, reg);
	if (val & PIPECONF_ENABLE) {
		/* we keep both pipes enabled on 830 */
		drm_WARN_ON(&dev_priv->drm, !IS_I830(dev_priv));
		return;
	}

	intel_de_write(dev_priv, reg, val | PIPECONF_ENABLE);
	intel_de_posting_read(dev_priv, reg);

	/*
	 * Until the pipe starts PIPEDSL reads will return a stale value,
	 * which causes an apparent vblank timestamp jump when PIPEDSL
	 * resets to its proper value. That also messes up the frame count
	 * when it's derived from the timestamps. So let's wait for the
	 * pipe to start properly before we call drm_crtc_vblank_on()
	 */
	if (intel_crtc_max_vblank_count(new_crtc_state) == 0)
		intel_wait_for_pipe_scanline_moving(crtc);
}

void intel_disable_pipe(const struct intel_crtc_state *old_crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	enum transcoder cpu_transcoder = old_crtc_state->cpu_transcoder;
	enum pipe pipe = crtc->pipe;
	i915_reg_t reg;
	u32 val;

	drm_dbg_kms(&dev_priv->drm, "disabling pipe %c\n", pipe_name(pipe));

	/*
	 * Make sure planes won't keep trying to pump pixels to us,
	 * or we might hang the display.
	 */
	assert_planes_disabled(crtc);

	trace_intel_pipe_disable(crtc);

	reg = PIPECONF(cpu_transcoder);
	val = intel_de_read(dev_priv, reg);
	if ((val & PIPECONF_ENABLE) == 0)
		return;

	/*
	 * Double wide has implications for planes
	 * so best keep it disabled when not needed.
	 */
	if (old_crtc_state->double_wide)
		val &= ~PIPECONF_DOUBLE_WIDE;

	/* Don't disable pipe or pipe PLLs if needed */
	if (!IS_I830(dev_priv))
		val &= ~PIPECONF_ENABLE;

	intel_de_write(dev_priv, reg, val);
	if ((val & PIPECONF_ENABLE) == 0)
		intel_wait_for_pipe_off(old_crtc_state);
}

static unsigned int intel_tile_size(const struct drm_i915_private *dev_priv)
{
	return IS_GEN(dev_priv, 2) ? 2048 : 4096;
}

static bool is_ccs_plane(const struct drm_framebuffer *fb, int plane)
{
	if (!is_ccs_modifier(fb->modifier))
		return false;

	return plane >= fb->format->num_planes / 2;
}

static bool is_gen12_ccs_modifier(u64 modifier)
{
	return modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS ||
	       modifier == I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS;

}

static bool is_gen12_ccs_plane(const struct drm_framebuffer *fb, int plane)
{
	return is_gen12_ccs_modifier(fb->modifier) && is_ccs_plane(fb, plane);
}

static bool is_aux_plane(const struct drm_framebuffer *fb, int plane)
{
	if (is_ccs_modifier(fb->modifier))
		return is_ccs_plane(fb, plane);

	return plane == 1;
}

static int main_to_ccs_plane(const struct drm_framebuffer *fb, int main_plane)
{
	drm_WARN_ON(fb->dev, !is_ccs_modifier(fb->modifier) ||
		    (main_plane && main_plane >= fb->format->num_planes / 2));

	return fb->format->num_planes / 2 + main_plane;
}

static int ccs_to_main_plane(const struct drm_framebuffer *fb, int ccs_plane)
{
	drm_WARN_ON(fb->dev, !is_ccs_modifier(fb->modifier) ||
		    ccs_plane < fb->format->num_planes / 2);

	return ccs_plane - fb->format->num_planes / 2;
}

/* Return either the main plane's CCS or - if not a CCS FB - UV plane */
int intel_main_to_aux_plane(const struct drm_framebuffer *fb, int main_plane)
{
	if (is_ccs_modifier(fb->modifier))
		return main_to_ccs_plane(fb, main_plane);

	return 1;
}

bool
intel_format_info_is_yuv_semiplanar(const struct drm_format_info *info,
				    uint64_t modifier)
{
	return info->is_yuv &&
	       info->num_planes == (is_ccs_modifier(modifier) ? 4 : 2);
}

static bool is_semiplanar_uv_plane(const struct drm_framebuffer *fb,
				   int color_plane)
{
	return intel_format_info_is_yuv_semiplanar(fb->format, fb->modifier) &&
	       color_plane == 1;
}

static unsigned int
intel_tile_width_bytes(const struct drm_framebuffer *fb, int color_plane)
{
	struct drm_i915_private *dev_priv = to_i915(fb->dev);
	unsigned int cpp = fb->format->cpp[color_plane];

	switch (fb->modifier) {
	case DRM_FORMAT_MOD_LINEAR:
		return intel_tile_size(dev_priv);
	case I915_FORMAT_MOD_X_TILED:
		if (IS_GEN(dev_priv, 2))
			return 128;
		else
			return 512;
	case I915_FORMAT_MOD_Y_TILED_CCS:
		if (is_ccs_plane(fb, color_plane))
			return 128;
		fallthrough;
	case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS:
	case I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS:
		if (is_ccs_plane(fb, color_plane))
			return 64;
		fallthrough;
	case I915_FORMAT_MOD_Y_TILED:
		if (IS_GEN(dev_priv, 2) || HAS_128_BYTE_Y_TILING(dev_priv))
			return 128;
		else
			return 512;
	case I915_FORMAT_MOD_Yf_TILED_CCS:
		if (is_ccs_plane(fb, color_plane))
			return 128;
		fallthrough;
	case I915_FORMAT_MOD_Yf_TILED:
		switch (cpp) {
		case 1:
			return 64;
		case 2:
		case 4:
			return 128;
		case 8:
		case 16:
			return 256;
		default:
			MISSING_CASE(cpp);
			return cpp;
		}
		break;
	default:
		MISSING_CASE(fb->modifier);
		return cpp;
	}
}

static unsigned int
intel_tile_height(const struct drm_framebuffer *fb, int color_plane)
{
	if (is_gen12_ccs_plane(fb, color_plane))
		return 1;

	return intel_tile_size(to_i915(fb->dev)) /
		intel_tile_width_bytes(fb, color_plane);
}

/* Return the tile dimensions in pixel units */
static void intel_tile_dims(const struct drm_framebuffer *fb, int color_plane,
			    unsigned int *tile_width,
			    unsigned int *tile_height)
{
	unsigned int tile_width_bytes = intel_tile_width_bytes(fb, color_plane);
	unsigned int cpp = fb->format->cpp[color_plane];

	*tile_width = tile_width_bytes / cpp;
	*tile_height = intel_tile_height(fb, color_plane);
}

static unsigned int intel_tile_row_size(const struct drm_framebuffer *fb,
					int color_plane)
{
	unsigned int tile_width, tile_height;

	intel_tile_dims(fb, color_plane, &tile_width, &tile_height);

	return fb->pitches[color_plane] * tile_height;
}

unsigned int
intel_fb_align_height(const struct drm_framebuffer *fb,
		      int color_plane, unsigned int height)
{
	unsigned int tile_height = intel_tile_height(fb, color_plane);

	return ALIGN(height, tile_height);
}

unsigned int intel_rotation_info_size(const struct intel_rotation_info *rot_info)
{
	unsigned int size = 0;
	int i;

	for (i = 0 ; i < ARRAY_SIZE(rot_info->plane); i++)
		size += rot_info->plane[i].width * rot_info->plane[i].height;

	return size;
}

unsigned int intel_remapped_info_size(const struct intel_remapped_info *rem_info)
{
	unsigned int size = 0;
	int i;

	for (i = 0 ; i < ARRAY_SIZE(rem_info->plane); i++)
		size += rem_info->plane[i].width * rem_info->plane[i].height;

	return size;
}

static void
intel_fill_fb_ggtt_view(struct i915_ggtt_view *view,
			const struct drm_framebuffer *fb,
			unsigned int rotation)
{
	view->type = I915_GGTT_VIEW_NORMAL;
	if (drm_rotation_90_or_270(rotation)) {
		view->type = I915_GGTT_VIEW_ROTATED;
		view->rotated = to_intel_framebuffer(fb)->rot_info;
	}
}

static unsigned int intel_cursor_alignment(const struct drm_i915_private *dev_priv)
{
	if (IS_I830(dev_priv))
		return 16 * 1024;
	else if (IS_I85X(dev_priv))
		return 256;
	else if (IS_I845G(dev_priv) || IS_I865G(dev_priv))
		return 32;
	else
		return 4 * 1024;
}

static unsigned int intel_linear_alignment(const struct drm_i915_private *dev_priv)
{
	if (INTEL_GEN(dev_priv) >= 9)
		return 256 * 1024;
	else if (IS_I965G(dev_priv) || IS_I965GM(dev_priv) ||
		 IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
		return 128 * 1024;
	else if (INTEL_GEN(dev_priv) >= 4)
		return 4 * 1024;
	else
		return 0;
}

static unsigned int intel_surf_alignment(const struct drm_framebuffer *fb,
					 int color_plane)
{
	struct drm_i915_private *dev_priv = to_i915(fb->dev);

	/* AUX_DIST needs only 4K alignment */
	if ((INTEL_GEN(dev_priv) < 12 && is_aux_plane(fb, color_plane)) ||
	    is_ccs_plane(fb, color_plane))
		return 4096;

	switch (fb->modifier) {
	case DRM_FORMAT_MOD_LINEAR:
		return intel_linear_alignment(dev_priv);
	case I915_FORMAT_MOD_X_TILED:
		if (INTEL_GEN(dev_priv) >= 9)
			return 256 * 1024;
		return 0;
	case I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS:
		if (is_semiplanar_uv_plane(fb, color_plane))
			return intel_tile_row_size(fb, color_plane);
		fallthrough;
	case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS:
		return 16 * 1024;
	case I915_FORMAT_MOD_Y_TILED_CCS:
	case I915_FORMAT_MOD_Yf_TILED_CCS:
	case I915_FORMAT_MOD_Y_TILED:
		if (INTEL_GEN(dev_priv) >= 12 &&
		    is_semiplanar_uv_plane(fb, color_plane))
			return intel_tile_row_size(fb, color_plane);
		fallthrough;
	case I915_FORMAT_MOD_Yf_TILED:
		return 1 * 1024 * 1024;
	default:
		MISSING_CASE(fb->modifier);
		return 0;
	}
}

static bool intel_plane_uses_fence(const struct intel_plane_state *plane_state)
{
	struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane);
	struct drm_i915_private *dev_priv = to_i915(plane->base.dev);

	return INTEL_GEN(dev_priv) < 4 ||
		(plane->has_fbc &&
		 plane_state->view.type == I915_GGTT_VIEW_NORMAL);
}

struct i915_vma *
intel_pin_and_fence_fb_obj(struct drm_framebuffer *fb,
			   const struct i915_ggtt_view *view,
			   bool uses_fence,
			   unsigned long *out_flags)
{
	struct drm_device *dev = fb->dev;
	struct drm_i915_private *dev_priv = to_i915(dev);
	struct drm_i915_gem_object *obj = intel_fb_obj(fb);
	intel_wakeref_t wakeref;
	struct i915_vma *vma;
	unsigned int pinctl;
	u32 alignment;

	if (drm_WARN_ON(dev, !i915_gem_object_is_framebuffer(obj)))
		return ERR_PTR(-EINVAL);

	alignment = intel_surf_alignment(fb, 0);
	if (drm_WARN_ON(dev, alignment && !is_power_of_2(alignment)))
		return ERR_PTR(-EINVAL);

	/* Note that the w/a also requires 64 PTE of padding following the
	 * bo. We currently fill all unused PTE with the shadow page and so
	 * we should always have valid PTE following the scanout preventing
	 * the VT-d warning.
	 */
	if (intel_scanout_needs_vtd_wa(dev_priv) && alignment < 256 * 1024)
		alignment = 256 * 1024;

	/*
	 * Global gtt pte registers are special registers which actually forward
	 * writes to a chunk of system memory. Which means that there is no risk
	 * that the register values disappear as soon as we call
	 * intel_runtime_pm_put(), so it is correct to wrap only the
	 * pin/unpin/fence and not more.
	 */
	wakeref = intel_runtime_pm_get(&dev_priv->runtime_pm);

	atomic_inc(&dev_priv->gpu_error.pending_fb_pin);

	/*
	 * Valleyview is definitely limited to scanning out the first
	 * 512MiB. Lets presume this behaviour was inherited from the
	 * g4x display engine and that all earlier gen are similarly
	 * limited. Testing suggests that it is a little more
	 * complicated than this. For example, Cherryview appears quite
	 * happy to scanout from anywhere within its global aperture.
	 */
	pinctl = 0;
	if (HAS_GMCH(dev_priv))
		pinctl |= PIN_MAPPABLE;

	vma = i915_gem_object_pin_to_display_plane(obj,
						   alignment, view, pinctl);
	if (IS_ERR(vma))
		goto err;

	if (uses_fence && i915_vma_is_map_and_fenceable(vma)) {
		int ret;

		/*
		 * Install a fence for tiled scan-out. Pre-i965 always needs a
		 * fence, whereas 965+ only requires a fence if using
		 * framebuffer compression.  For simplicity, we always, when
		 * possible, install a fence as the cost is not that onerous.
		 *
		 * If we fail to fence the tiled scanout, then either the
		 * modeset will reject the change (which is highly unlikely as
		 * the affected systems, all but one, do not have unmappable
		 * space) or we will not be able to enable full powersaving
		 * techniques (also likely not to apply due to various limits
		 * FBC and the like impose on the size of the buffer, which
		 * presumably we violated anyway with this unmappable buffer).
		 * Anyway, it is presumably better to stumble onwards with
		 * something and try to run the system in a "less than optimal"
		 * mode that matches the user configuration.
		 */
		ret = i915_vma_pin_fence(vma);
		if (ret != 0 && INTEL_GEN(dev_priv) < 4) {
			i915_gem_object_unpin_from_display_plane(vma);
			vma = ERR_PTR(ret);
			goto err;
		}

		if (ret == 0 && vma->fence)
			*out_flags |= PLANE_HAS_FENCE;
	}

	i915_vma_get(vma);
err:
	atomic_dec(&dev_priv->gpu_error.pending_fb_pin);
	intel_runtime_pm_put(&dev_priv->runtime_pm, wakeref);
	return vma;
}

void intel_unpin_fb_vma(struct i915_vma *vma, unsigned long flags)
{
	i915_gem_object_lock(vma->obj, NULL);
	if (flags & PLANE_HAS_FENCE)
		i915_vma_unpin_fence(vma);
	i915_gem_object_unpin_from_display_plane(vma);
	i915_gem_object_unlock(vma->obj);

	i915_vma_put(vma);
}

static int intel_fb_pitch(const struct drm_framebuffer *fb, int color_plane,
			  unsigned int rotation)
{
	if (drm_rotation_90_or_270(rotation))
		return to_intel_framebuffer(fb)->rotated[color_plane].pitch;
	else
		return fb->pitches[color_plane];
}

/*
 * Convert the x/y offsets into a linear offset.
 * Only valid with 0/180 degree rotation, which is fine since linear
 * offset is only used with linear buffers on pre-hsw and tiled buffers
 * with gen2/3, and 90/270 degree rotations isn't supported on any of them.
 */
u32 intel_fb_xy_to_linear(int x, int y,
			  const struct intel_plane_state *state,
			  int color_plane)
{
	const struct drm_framebuffer *fb = state->hw.fb;
	unsigned int cpp = fb->format->cpp[color_plane];
	unsigned int pitch = state->color_plane[color_plane].stride;

	return y * pitch + x * cpp;
}

/*
 * Add the x/y offsets derived from fb->offsets[] to the user
 * specified plane src x/y offsets. The resulting x/y offsets
 * specify the start of scanout from the beginning of the gtt mapping.
 */
void intel_add_fb_offsets(int *x, int *y,
			  const struct intel_plane_state *state,
			  int color_plane)

{
	*x += state->color_plane[color_plane].x;
	*y += state->color_plane[color_plane].y;
}

static u32 intel_adjust_tile_offset(int *x, int *y,
				    unsigned int tile_width,
				    unsigned int tile_height,
				    unsigned int tile_size,
				    unsigned int pitch_tiles,
				    u32 old_offset,
				    u32 new_offset)
{
	unsigned int pitch_pixels = pitch_tiles * tile_width;
	unsigned int tiles;

	WARN_ON(old_offset & (tile_size - 1));
	WARN_ON(new_offset & (tile_size - 1));
	WARN_ON(new_offset > old_offset);

	tiles = (old_offset - new_offset) / tile_size;

	*y += tiles / pitch_tiles * tile_height;
	*x += tiles % pitch_tiles * tile_width;

	/* minimize x in case it got needlessly big */
	*y += *x / pitch_pixels * tile_height;
	*x %= pitch_pixels;

	return new_offset;
}

static bool is_surface_linear(const struct drm_framebuffer *fb, int color_plane)
{
	return fb->modifier == DRM_FORMAT_MOD_LINEAR ||
	       is_gen12_ccs_plane(fb, color_plane);
}

static u32 intel_adjust_aligned_offset(int *x, int *y,
				       const struct drm_framebuffer *fb,
				       int color_plane,
				       unsigned int rotation,
				       unsigned int pitch,
				       u32 old_offset, u32 new_offset)
{
	struct drm_i915_private *dev_priv = to_i915(fb->dev);
	unsigned int cpp = fb->format->cpp[color_plane];

	drm_WARN_ON(&dev_priv->drm, new_offset > old_offset);

	if (!is_surface_linear(fb, color_plane)) {
		unsigned int tile_size, tile_width, tile_height;
		unsigned int pitch_tiles;

		tile_size = intel_tile_size(dev_priv);
		intel_tile_dims(fb, color_plane, &tile_width, &tile_height);

		if (drm_rotation_90_or_270(rotation)) {
			pitch_tiles = pitch / tile_height;
			swap(tile_width, tile_height);
		} else {
			pitch_tiles = pitch / (tile_width * cpp);
		}

		intel_adjust_tile_offset(x, y, tile_width, tile_height,
					 tile_size, pitch_tiles,
					 old_offset, new_offset);
	} else {
		old_offset += *y * pitch + *x * cpp;

		*y = (old_offset - new_offset) / pitch;
		*x = ((old_offset - new_offset) - *y * pitch) / cpp;
	}

	return new_offset;
}

/*
 * Adjust the tile offset by moving the difference into
 * the x/y offsets.
 */
static u32 intel_plane_adjust_aligned_offset(int *x, int *y,
					     const struct intel_plane_state *state,
					     int color_plane,
					     u32 old_offset, u32 new_offset)
{
	return intel_adjust_aligned_offset(x, y, state->hw.fb, color_plane,
					   state->hw.rotation,
					   state->color_plane[color_plane].stride,
					   old_offset, new_offset);
}

/*
 * Computes the aligned offset to the base tile and adjusts
 * x, y. bytes per pixel is assumed to be a power-of-two.
 *
 * In the 90/270 rotated case, x and y are assumed
 * to be already rotated to match the rotated GTT view, and
 * pitch is the tile_height aligned framebuffer height.
 *
 * This function is used when computing the derived information
 * under intel_framebuffer, so using any of that information
 * here is not allowed. Anything under drm_framebuffer can be
 * used. This is why the user has to pass in the pitch since it
 * is specified in the rotated orientation.
 */
static u32 intel_compute_aligned_offset(struct drm_i915_private *dev_priv,
					int *x, int *y,
					const struct drm_framebuffer *fb,
					int color_plane,
					unsigned int pitch,
					unsigned int rotation,
					u32 alignment)
{
	unsigned int cpp = fb->format->cpp[color_plane];
	u32 offset, offset_aligned;

	if (!is_surface_linear(fb, color_plane)) {
		unsigned int tile_size, tile_width, tile_height;
		unsigned int tile_rows, tiles, pitch_tiles;

		tile_size = intel_tile_size(dev_priv);
		intel_tile_dims(fb, color_plane, &tile_width, &tile_height);

		if (drm_rotation_90_or_270(rotation)) {
			pitch_tiles = pitch / tile_height;
			swap(tile_width, tile_height);
		} else {
			pitch_tiles = pitch / (tile_width * cpp);
		}

		tile_rows = *y / tile_height;
		*y %= tile_height;

		tiles = *x / tile_width;
		*x %= tile_width;

		offset = (tile_rows * pitch_tiles + tiles) * tile_size;

		offset_aligned = offset;
		if (alignment)
			offset_aligned = rounddown(offset_aligned, alignment);

		intel_adjust_tile_offset(x, y, tile_width, tile_height,
					 tile_size, pitch_tiles,
					 offset, offset_aligned);
	} else {
		offset = *y * pitch + *x * cpp;
		offset_aligned = offset;
		if (alignment) {
			offset_aligned = rounddown(offset_aligned, alignment);
			*y = (offset % alignment) / pitch;
			*x = ((offset % alignment) - *y * pitch) / cpp;
		} else {
			*y = *x = 0;
		}
	}

	return offset_aligned;
}

static u32 intel_plane_compute_aligned_offset(int *x, int *y,
					      const struct intel_plane_state *state,
					      int color_plane)
{
	struct intel_plane *intel_plane = to_intel_plane(state->uapi.plane);
	struct drm_i915_private *dev_priv = to_i915(intel_plane->base.dev);
	const struct drm_framebuffer *fb = state->hw.fb;
	unsigned int rotation = state->hw.rotation;
	int pitch = state->color_plane[color_plane].stride;
	u32 alignment;

	if (intel_plane->id == PLANE_CURSOR)
		alignment = intel_cursor_alignment(dev_priv);
	else
		alignment = intel_surf_alignment(fb, color_plane);

	return intel_compute_aligned_offset(dev_priv, x, y, fb, color_plane,
					    pitch, rotation, alignment);
}

/* Convert the fb->offset[] into x/y offsets */
static int intel_fb_offset_to_xy(int *x, int *y,
				 const struct drm_framebuffer *fb,
				 int color_plane)
{
	struct drm_i915_private *dev_priv = to_i915(fb->dev);
	unsigned int height;
	u32 alignment;

	if (INTEL_GEN(dev_priv) >= 12 &&
	    is_semiplanar_uv_plane(fb, color_plane))
		alignment = intel_tile_row_size(fb, color_plane);
	else if (fb->modifier != DRM_FORMAT_MOD_LINEAR)
		alignment = intel_tile_size(dev_priv);
	else
		alignment = 0;

	if (alignment != 0 && fb->offsets[color_plane] % alignment) {
		drm_dbg_kms(&dev_priv->drm,
			    "Misaligned offset 0x%08x for color plane %d\n",
			    fb->offsets[color_plane], color_plane);
		return -EINVAL;
	}

	height = drm_framebuffer_plane_height(fb->height, fb, color_plane);
	height = ALIGN(height, intel_tile_height(fb, color_plane));

	/* Catch potential overflows early */
	if (add_overflows_t(u32, mul_u32_u32(height, fb->pitches[color_plane]),
			    fb->offsets[color_plane])) {
		drm_dbg_kms(&dev_priv->drm,
			    "Bad offset 0x%08x or pitch %d for color plane %d\n",
			    fb->offsets[color_plane], fb->pitches[color_plane],
			    color_plane);
		return -ERANGE;
	}

	*x = 0;
	*y = 0;

	intel_adjust_aligned_offset(x, y,
				    fb, color_plane, DRM_MODE_ROTATE_0,
				    fb->pitches[color_plane],
				    fb->offsets[color_plane], 0);

	return 0;
}

static unsigned int intel_fb_modifier_to_tiling(u64 fb_modifier)
{
	switch (fb_modifier) {
	case I915_FORMAT_MOD_X_TILED:
		return I915_TILING_X;
	case I915_FORMAT_MOD_Y_TILED:
	case I915_FORMAT_MOD_Y_TILED_CCS:
	case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS:
	case I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS:
		return I915_TILING_Y;
	default:
		return I915_TILING_NONE;
	}
}

/*
 * From the Sky Lake PRM:
 * "The Color Control Surface (CCS) contains the compression status of
 *  the cache-line pairs. The compression state of the cache-line pair
 *  is specified by 2 bits in the CCS. Each CCS cache-line represents
 *  an area on the main surface of 16 x16 sets of 128 byte Y-tiled
 *  cache-line-pairs. CCS is always Y tiled."
 *
 * Since cache line pairs refers to horizontally adjacent cache lines,
 * each cache line in the CCS corresponds to an area of 32x16 cache
 * lines on the main surface. Since each pixel is 4 bytes, this gives
 * us a ratio of one byte in the CCS for each 8x16 pixels in the
 * main surface.
 */
static const struct drm_format_info skl_ccs_formats[] = {
	{ .format = DRM_FORMAT_XRGB8888, .depth = 24, .num_planes = 2,
	  .cpp = { 4, 1, }, .hsub = 8, .vsub = 16, },
	{ .format = DRM_FORMAT_XBGR8888, .depth = 24, .num_planes = 2,
	  .cpp = { 4, 1, }, .hsub = 8, .vsub = 16, },
	{ .format = DRM_FORMAT_ARGB8888, .depth = 32, .num_planes = 2,
	  .cpp = { 4, 1, }, .hsub = 8, .vsub = 16, .has_alpha = true, },
	{ .format = DRM_FORMAT_ABGR8888, .depth = 32, .num_planes = 2,
	  .cpp = { 4, 1, }, .hsub = 8, .vsub = 16, .has_alpha = true, },
};

/*
 * Gen-12 compression uses 4 bits of CCS data for each cache line pair in the
 * main surface. And each 64B CCS cache line represents an area of 4x1 Y-tiles
 * in the main surface. With 4 byte pixels and each Y-tile having dimensions of
 * 32x32 pixels, the ratio turns out to 1B in the CCS for every 2x32 pixels in
 * the main surface.
 */
static const struct drm_format_info gen12_ccs_formats[] = {
	{ .format = DRM_FORMAT_XRGB8888, .depth = 24, .num_planes = 2,
	  .char_per_block = { 4, 1 }, .block_w = { 1, 2 }, .block_h = { 1, 1 },
	  .hsub = 1, .vsub = 1, },
	{ .format = DRM_FORMAT_XBGR8888, .depth = 24, .num_planes = 2,
	  .char_per_block = { 4, 1 }, .block_w = { 1, 2 }, .block_h = { 1, 1 },
	  .hsub = 1, .vsub = 1, },
	{ .format = DRM_FORMAT_ARGB8888, .depth = 32, .num_planes = 2,
	  .char_per_block = { 4, 1 }, .block_w = { 1, 2 }, .block_h = { 1, 1 },
	  .hsub = 1, .vsub = 1, .has_alpha = true },
	{ .format = DRM_FORMAT_ABGR8888, .depth = 32, .num_planes = 2,
	  .char_per_block = { 4, 1 }, .block_w = { 1, 2 }, .block_h = { 1, 1 },
	  .hsub = 1, .vsub = 1, .has_alpha = true },
	{ .format = DRM_FORMAT_YUYV, .num_planes = 2,
	  .char_per_block = { 2, 1 }, .block_w = { 1, 2 }, .block_h = { 1, 1 },
	  .hsub = 2, .vsub = 1, .is_yuv = true },
	{ .format = DRM_FORMAT_YVYU, .num_planes = 2,
	  .char_per_block = { 2, 1 }, .block_w = { 1, 2 }, .block_h = { 1, 1 },
	  .hsub = 2, .vsub = 1, .is_yuv = true },
	{ .format = DRM_FORMAT_UYVY, .num_planes = 2,
	  .char_per_block = { 2, 1 }, .block_w = { 1, 2 }, .block_h = { 1, 1 },
	  .hsub = 2, .vsub = 1, .is_yuv = true },
	{ .format = DRM_FORMAT_VYUY, .num_planes = 2,
	  .char_per_block = { 2, 1 }, .block_w = { 1, 2 }, .block_h = { 1, 1 },
	  .hsub = 2, .vsub = 1, .is_yuv = true },
	{ .format = DRM_FORMAT_NV12, .num_planes = 4,
	  .char_per_block = { 1, 2, 1, 1 }, .block_w = { 1, 1, 4, 4 }, .block_h = { 1, 1, 1, 1 },
	  .hsub = 2, .vsub = 2, .is_yuv = true },
	{ .format = DRM_FORMAT_P010, .num_planes = 4,
	  .char_per_block = { 2, 4, 1, 1 }, .block_w = { 1, 1, 2, 2 }, .block_h = { 1, 1, 1, 1 },
	  .hsub = 2, .vsub = 2, .is_yuv = true },
	{ .format = DRM_FORMAT_P012, .num_planes = 4,
	  .char_per_block = { 2, 4, 1, 1 }, .block_w = { 1, 1, 2, 2 }, .block_h = { 1, 1, 1, 1 },
	  .hsub = 2, .vsub = 2, .is_yuv = true },
	{ .format = DRM_FORMAT_P016, .num_planes = 4,
	  .char_per_block = { 2, 4, 1, 1 }, .block_w = { 1, 1, 2, 2 }, .block_h = { 1, 1, 1, 1 },
	  .hsub = 2, .vsub = 2, .is_yuv = true },
};

static const struct drm_format_info *
lookup_format_info(const struct drm_format_info formats[],
		   int num_formats, u32 format)
{
	int i;

	for (i = 0; i < num_formats; i++) {
		if (formats[i].format == format)
			return &formats[i];
	}

	return NULL;
}

static const struct drm_format_info *
intel_get_format_info(const struct drm_mode_fb_cmd2 *cmd)
{
	switch (cmd->modifier[0]) {
	case I915_FORMAT_MOD_Y_TILED_CCS:
	case I915_FORMAT_MOD_Yf_TILED_CCS:
		return lookup_format_info(skl_ccs_formats,
					  ARRAY_SIZE(skl_ccs_formats),
					  cmd->pixel_format);
	case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS:
	case I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS:
		return lookup_format_info(gen12_ccs_formats,
					  ARRAY_SIZE(gen12_ccs_formats),
					  cmd->pixel_format);
	default:
		return NULL;
	}
}

bool is_ccs_modifier(u64 modifier)
{
	return modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS ||
	       modifier == I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS ||
	       modifier == I915_FORMAT_MOD_Y_TILED_CCS ||
	       modifier == I915_FORMAT_MOD_Yf_TILED_CCS;
}

static int gen12_ccs_aux_stride(struct drm_framebuffer *fb, int ccs_plane)
{
	return DIV_ROUND_UP(fb->pitches[ccs_to_main_plane(fb, ccs_plane)],
			    512) * 64;
}

u32 intel_plane_fb_max_stride(struct drm_i915_private *dev_priv,
			      u32 pixel_format, u64 modifier)
{
	struct intel_crtc *crtc;
	struct intel_plane *plane;

	/*
	 * We assume the primary plane for pipe A has
	 * the highest stride limits of them all,
	 * if in case pipe A is disabled, use the first pipe from pipe_mask.
	 */
	crtc = intel_get_first_crtc(dev_priv);
	if (!crtc)
		return 0;

	plane = to_intel_plane(crtc->base.primary);

	return plane->max_stride(plane, pixel_format, modifier,
				 DRM_MODE_ROTATE_0);
}

static
u32 intel_fb_max_stride(struct drm_i915_private *dev_priv,
			u32 pixel_format, u64 modifier)
{
	/*
	 * Arbitrary limit for gen4+ chosen to match the
	 * render engine max stride.
	 *
	 * The new CCS hash mode makes remapping impossible
	 */
	if (!is_ccs_modifier(modifier)) {
		if (INTEL_GEN(dev_priv) >= 7)
			return 256*1024;
		else if (INTEL_GEN(dev_priv) >= 4)
			return 128*1024;
	}

	return intel_plane_fb_max_stride(dev_priv, pixel_format, modifier);
}

static u32
intel_fb_stride_alignment(const struct drm_framebuffer *fb, int color_plane)
{
	struct drm_i915_private *dev_priv = to_i915(fb->dev);
	u32 tile_width;

	if (is_surface_linear(fb, color_plane)) {
		u32 max_stride = intel_plane_fb_max_stride(dev_priv,
							   fb->format->format,
							   fb->modifier);

		/*
		 * To make remapping with linear generally feasible
		 * we need the stride to be page aligned.
		 */
		if (fb->pitches[color_plane] > max_stride &&
		    !is_ccs_modifier(fb->modifier))
			return intel_tile_size(dev_priv);
		else
			return 64;
	}

	tile_width = intel_tile_width_bytes(fb, color_plane);
	if (is_ccs_modifier(fb->modifier)) {
		/*
		 * Display WA #0531: skl,bxt,kbl,glk
		 *
		 * Render decompression and plane width > 3840
		 * combined with horizontal panning requires the
		 * plane stride to be a multiple of 4. We'll just
		 * require the entire fb to accommodate that to avoid
		 * potential runtime errors at plane configuration time.
		 */
		if (IS_GEN(dev_priv, 9) && color_plane == 0 && fb->width > 3840)
			tile_width *= 4;
		/*
		 * The main surface pitch must be padded to a multiple of four
		 * tile widths.
		 */
		else if (INTEL_GEN(dev_priv) >= 12)
			tile_width *= 4;
	}
	return tile_width;
}

bool intel_plane_can_remap(const struct intel_plane_state *plane_state)
{
	struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane);
	struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
	const struct drm_framebuffer *fb = plane_state->hw.fb;
	int i;

	/* We don't want to deal with remapping with cursors */
	if (plane->id == PLANE_CURSOR)
		return false;

	/*
	 * The display engine limits already match/exceed the
	 * render engine limits, so not much point in remapping.
	 * Would also need to deal with the fence POT alignment
	 * and gen2 2KiB GTT tile size.
	 */
	if (INTEL_GEN(dev_priv) < 4)
		return false;

	/*
	 * The new CCS hash mode isn't compatible with remapping as
	 * the virtual address of the pages affects the compressed data.
	 */
	if (is_ccs_modifier(fb->modifier))
		return false;

	/* Linear needs a page aligned stride for remapping */
	if (fb->modifier == DRM_FORMAT_MOD_LINEAR) {
		unsigned int alignment = intel_tile_size(dev_priv) - 1;

		for (i = 0; i < fb->format->num_planes; i++) {
			if (fb->pitches[i] & alignment)
				return false;
		}
	}

	return true;
}

static bool intel_plane_needs_remap(const struct intel_plane_state *plane_state)
{
	struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane);
	const struct drm_framebuffer *fb = plane_state->hw.fb;
	unsigned int rotation = plane_state->hw.rotation;
	u32 stride, max_stride;

	/*
	 * No remapping for invisible planes since we don't have
	 * an actual source viewport to remap.
	 */
	if (!plane_state->uapi.visible)
		return false;

	if (!intel_plane_can_remap(plane_state))
		return false;

	/*
	 * FIXME: aux plane limits on gen9+ are
	 * unclear in Bspec, for now no checking.
	 */
	stride = intel_fb_pitch(fb, 0, rotation);
	max_stride = plane->max_stride(plane, fb->format->format,
				       fb->modifier, rotation);

	return stride > max_stride;
}

static void
intel_fb_plane_get_subsampling(int *hsub, int *vsub,
			       const struct drm_framebuffer *fb,
			       int color_plane)
{
	int main_plane;

	if (color_plane == 0) {
		*hsub = 1;
		*vsub = 1;

		return;
	}

	/*
	 * TODO: Deduct the subsampling from the char block for all CCS
	 * formats and planes.
	 */
	if (!is_gen12_ccs_plane(fb, color_plane)) {
		*hsub = fb->format->hsub;
		*vsub = fb->format->vsub;

		return;
	}

	main_plane = ccs_to_main_plane(fb, color_plane);
	*hsub = drm_format_info_block_width(fb->format, color_plane) /
		drm_format_info_block_width(fb->format, main_plane);

	/*
	 * The min stride check in the core framebuffer_check() function
	 * assumes that format->hsub applies to every plane except for the
	 * first plane. That's incorrect for the CCS AUX plane of the first
	 * plane, but for the above check to pass we must define the block
	 * width with that subsampling applied to it. Adjust the width here
	 * accordingly, so we can calculate the actual subsampling factor.
	 */
	if (main_plane == 0)
		*hsub *= fb->format->hsub;

	*vsub = 32;
}
static int
intel_fb_check_ccs_xy(struct drm_framebuffer *fb, int ccs_plane, int x, int y)
{
	struct drm_i915_private *i915 = to_i915(fb->dev);
	struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
	int main_plane;
	int hsub, vsub;
	int tile_width, tile_height;
	int ccs_x, ccs_y;
	int main_x, main_y;

	if (!is_ccs_plane(fb, ccs_plane))
		return 0;

	intel_tile_dims(fb, ccs_plane, &tile_width, &tile_height);
	intel_fb_plane_get_subsampling(&hsub, &vsub, fb, ccs_plane);

	tile_width *= hsub;
	tile_height *= vsub;

	ccs_x = (x * hsub) % tile_width;
	ccs_y = (y * vsub) % tile_height;

	main_plane = ccs_to_main_plane(fb, ccs_plane);
	main_x = intel_fb->normal[main_plane].x % tile_width;
	main_y = intel_fb->normal[main_plane].y % tile_height;

	/*
	 * CCS doesn't have its own x/y offset register, so the intra CCS tile
	 * x/y offsets must match between CCS and the main surface.
	 */
	if (main_x != ccs_x || main_y != ccs_y) {
		drm_dbg_kms(&i915->drm,
			      "Bad CCS x/y (main %d,%d ccs %d,%d) full (main %d,%d ccs %d,%d)\n",
			      main_x, main_y,
			      ccs_x, ccs_y,
			      intel_fb->normal[main_plane].x,
			      intel_fb->normal[main_plane].y,
			      x, y);
		return -EINVAL;
	}

	return 0;
}

static void
intel_fb_plane_dims(int *w, int *h, struct drm_framebuffer *fb, int color_plane)
{
	int main_plane = is_ccs_plane(fb, color_plane) ?
			 ccs_to_main_plane(fb, color_plane) : 0;
	int main_hsub, main_vsub;
	int hsub, vsub;

	intel_fb_plane_get_subsampling(&main_hsub, &main_vsub, fb, main_plane);
	intel_fb_plane_get_subsampling(&hsub, &vsub, fb, color_plane);
	*w = fb->width / main_hsub / hsub;
	*h = fb->height / main_vsub / vsub;
}

/*
 * Setup the rotated view for an FB plane and return the size the GTT mapping
 * requires for this view.
 */
static u32
setup_fb_rotation(int plane, const struct intel_remapped_plane_info *plane_info,
		  u32 gtt_offset_rotated, int x, int y,
		  unsigned int width, unsigned int height,
		  unsigned int tile_size,
		  unsigned int tile_width, unsigned int tile_height,
		  struct drm_framebuffer *fb)
{
	struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
	struct intel_rotation_info *rot_info = &intel_fb->rot_info;
	unsigned int pitch_tiles;
	struct drm_rect r;

	/* Y or Yf modifiers required for 90/270 rotation */
	if (fb->modifier != I915_FORMAT_MOD_Y_TILED &&
	    fb->modifier != I915_FORMAT_MOD_Yf_TILED)
		return 0;

	if (drm_WARN_ON(fb->dev, plane >= ARRAY_SIZE(rot_info->plane)))
		return 0;

	rot_info->plane[plane] = *plane_info;

	intel_fb->rotated[plane].pitch = plane_info->height * tile_height;

	/* rotate the x/y offsets to match the GTT view */
	drm_rect_init(&r, x, y, width, height);
	drm_rect_rotate(&r,
			plane_info->width * tile_width,
			plane_info->height * tile_height,
			DRM_MODE_ROTATE_270);
	x = r.x1;
	y = r.y1;

	/* rotate the tile dimensions to match the GTT view */
	pitch_tiles = intel_fb->rotated[plane].pitch / tile_height;
	swap(tile_width, tile_height);

	/*
	 * We only keep the x/y offsets, so push all of the
	 * gtt offset into the x/y offsets.
	 */
	intel_adjust_tile_offset(&x, &y,
				 tile_width, tile_height,
				 tile_size, pitch_tiles,
				 gtt_offset_rotated * tile_size, 0);

	/*
	 * First pixel of the framebuffer from
	 * the start of the rotated gtt mapping.
	 */
	intel_fb->rotated[plane].x = x;
	intel_fb->rotated[plane].y = y;

	return plane_info->width * plane_info->height;
}

static int
intel_fill_fb_info(struct drm_i915_private *dev_priv,
		   struct drm_framebuffer *fb)
{
	struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
	struct drm_i915_gem_object *obj = intel_fb_obj(fb);
	u32 gtt_offset_rotated = 0;
	unsigned int max_size = 0;
	int i, num_planes = fb->format->num_planes;
	unsigned int tile_size = intel_tile_size(dev_priv);

	for (i = 0; i < num_planes; i++) {
		unsigned int width, height;
		unsigned int cpp, size;
		u32 offset;
		int x, y;
		int ret;

		cpp = fb->format->cpp[i];
		intel_fb_plane_dims(&width, &height, fb, i);

		ret = intel_fb_offset_to_xy(&x, &y, fb, i);
		if (ret) {
			drm_dbg_kms(&dev_priv->drm,
				    "bad fb plane %d offset: 0x%x\n",
				    i, fb->offsets[i]);
			return ret;
		}

		ret = intel_fb_check_ccs_xy(fb, i, x, y);
		if (ret)
			return ret;

		/*
		 * The fence (if used) is aligned to the start of the object
		 * so having the framebuffer wrap around across the edge of the
		 * fenced region doesn't really work. We have no API to configure
		 * the fence start offset within the object (nor could we probably
		 * on gen2/3). So it's just easier if we just require that the
		 * fb layout agrees with the fence layout. We already check that the
		 * fb stride matches the fence stride elsewhere.
		 */
		if (i == 0 && i915_gem_object_is_tiled(obj) &&
		    (x + width) * cpp > fb->pitches[i]) {
			drm_dbg_kms(&dev_priv->drm,
				    "bad fb plane %d offset: 0x%x\n",
				     i, fb->offsets[i]);
			return -EINVAL;
		}

		/*
		 * First pixel of the framebuffer from
		 * the start of the normal gtt mapping.
		 */
		intel_fb->normal[i].x = x;
		intel_fb->normal[i].y = y;

		offset = intel_compute_aligned_offset(dev_priv, &x, &y, fb, i,
						      fb->pitches[i],
						      DRM_MODE_ROTATE_0,
						      tile_size);
		offset /= tile_size;

		if (!is_surface_linear(fb, i)) {
			struct intel_remapped_plane_info plane_info;
			unsigned int tile_width, tile_height;

			intel_tile_dims(fb, i, &tile_width, &tile_height);

			plane_info.offset = offset;
			plane_info.stride = DIV_ROUND_UP(fb->pitches[i],
							 tile_width * cpp);
			plane_info.width = DIV_ROUND_UP(x + width, tile_width);
			plane_info.height = DIV_ROUND_UP(y + height,
							 tile_height);

			/* how many tiles does this plane need */
			size = plane_info.stride * plane_info.height;
			/*
			 * If the plane isn't horizontally tile aligned,
			 * we need one more tile.
			 */
			if (x != 0)
				size++;

			gtt_offset_rotated +=
				setup_fb_rotation(i, &plane_info,
						  gtt_offset_rotated,
						  x, y, width, height,
						  tile_size,
						  tile_width, tile_height,
						  fb);
		} else {
			size = DIV_ROUND_UP((y + height) * fb->pitches[i] +
					    x * cpp, tile_size);
		}

		/* how many tiles in total needed in the bo */
		max_size = max(max_size, offset + size);
	}

	if (mul_u32_u32(max_size, tile_size) > obj->base.size) {
		drm_dbg_kms(&dev_priv->drm,
			    "fb too big for bo (need %llu bytes, have %zu bytes)\n",
			    mul_u32_u32(max_size, tile_size), obj->base.size);
		return -EINVAL;
	}

	return 0;
}

static void
intel_plane_remap_gtt(struct intel_plane_state *plane_state)
{
	struct drm_i915_private *dev_priv =
		to_i915(plane_state->uapi.plane->dev);
	struct drm_framebuffer *fb = plane_state->hw.fb;
	struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
	struct intel_rotation_info *info = &plane_state->view.rotated;
	unsigned int rotation = plane_state->hw.rotation;
	int i, num_planes = fb->format->num_planes;
	unsigned int tile_size = intel_tile_size(dev_priv);
	unsigned int src_x, src_y;
	unsigned int src_w, src_h;
	u32 gtt_offset = 0;

	memset(&plane_state->view, 0, sizeof(plane_state->view));
	plane_state->view.type = drm_rotation_90_or_270(rotation) ?
		I915_GGTT_VIEW_ROTATED : I915_GGTT_VIEW_REMAPPED;

	src_x = plane_state->uapi.src.x1 >> 16;
	src_y = plane_state->uapi.src.y1 >> 16;
	src_w = drm_rect_width(&plane_state->uapi.src) >> 16;
	src_h = drm_rect_height(&plane_state->uapi.src) >> 16;

	drm_WARN_ON(&dev_priv->drm, is_ccs_modifier(fb->modifier));

	/* Make src coordinates relative to the viewport */
	drm_rect_translate(&plane_state->uapi.src,
			   -(src_x << 16), -(src_y << 16));

	/* Rotate src coordinates to match rotated GTT view */
	if (drm_rotation_90_or_270(rotation))
		drm_rect_rotate(&plane_state->uapi.src,
				src_w << 16, src_h << 16,
				DRM_MODE_ROTATE_270);

	for (i = 0; i < num_planes; i++) {
		unsigned int hsub = i ? fb->format->hsub : 1;
		unsigned int vsub = i ? fb->format->vsub : 1;
		unsigned int cpp = fb->format->cpp[i];
		unsigned int tile_width, tile_height;
		unsigned int width, height;
		unsigned int pitch_tiles;
		unsigned int x, y;
		u32 offset;

		intel_tile_dims(fb, i, &tile_width, &tile_height);

		x = src_x / hsub;
		y = src_y / vsub;
		width = src_w / hsub;
		height = src_h / vsub;

		/*
		 * First pixel of the src viewport from the
		 * start of the normal gtt mapping.
		 */
		x += intel_fb->normal[i].x;
		y += intel_fb->normal[i].y;

		offset = intel_compute_aligned_offset(dev_priv, &x, &y,
						      fb, i, fb->pitches[i],
						      DRM_MODE_ROTATE_0, tile_size);
		offset /= tile_size;

		drm_WARN_ON(&dev_priv->drm, i >= ARRAY_SIZE(info->plane));
		info->plane[i].offset = offset;
		info->plane[i].stride = DIV_ROUND_UP(fb->pitches[i],
						     tile_width * cpp);
		info->plane[i].width = DIV_ROUND_UP(x + width, tile_width);
		info->plane[i].height = DIV_ROUND_UP(y + height, tile_height);

		if (drm_rotation_90_or_270(rotation)) {
			struct drm_rect r;

			/* rotate the x/y offsets to match the GTT view */
			drm_rect_init(&r, x, y, width, height);
			drm_rect_rotate(&r,
					info->plane[i].width * tile_width,
					info->plane[i].height * tile_height,
					DRM_MODE_ROTATE_270);
			x = r.x1;
			y = r.y1;

			pitch_tiles = info->plane[i].height;
			plane_state->color_plane[i].stride = pitch_tiles * tile_height;

			/* rotate the tile dimensions to match the GTT view */
			swap(tile_width, tile_height);
		} else {
			pitch_tiles = info->plane[i].width;
			plane_state->color_plane[i].stride = pitch_tiles * tile_width * cpp;
		}

		/*
		 * We only keep the x/y offsets, so push all of the
		 * gtt offset into the x/y offsets.
		 */
		intel_adjust_tile_offset(&x, &y,
					 tile_width, tile_height,
					 tile_size, pitch_tiles,
					 gtt_offset * tile_size, 0);

		gtt_offset += info->plane[i].width * info->plane[i].height;

		plane_state->color_plane[i].offset = 0;
		plane_state->color_plane[i].x = x;
		plane_state->color_plane[i].y = y;
	}
}

static int
intel_plane_compute_gtt(struct intel_plane_state *plane_state)
{
	const struct intel_framebuffer *fb =
		to_intel_framebuffer(plane_state->hw.fb);
	unsigned int rotation = plane_state->hw.rotation;
	int i, num_planes;

	if (!fb)
		return 0;

	num_planes = fb->base.format->num_planes;

	if (intel_plane_needs_remap(plane_state)) {
		intel_plane_remap_gtt(plane_state);

		/*
		 * Sometimes even remapping can't overcome
		 * the stride limitations :( Can happen with
		 * big plane sizes and suitably misaligned
		 * offsets.
		 */
		return intel_plane_check_stride(plane_state);
	}

	intel_fill_fb_ggtt_view(&plane_state->view, &fb->base, rotation);

	for (i = 0; i < num_planes; i++) {
		plane_state->color_plane[i].stride = intel_fb_pitch(&fb->base, i, rotation);
		plane_state->color_plane[i].offset = 0;

		if (drm_rotation_90_or_270(rotation)) {
			plane_state->color_plane[i].x = fb->rotated[i].x;
			plane_state->color_plane[i].y = fb->rotated[i].y;
		} else {
			plane_state->color_plane[i].x = fb->normal[i].x;
			plane_state->color_plane[i].y = fb->normal[i].y;
		}
	}

	/* Rotate src coordinates to match rotated GTT view */
	if (drm_rotation_90_or_270(rotation))
		drm_rect_rotate(&plane_state->uapi.src,
				fb->base.width << 16, fb->base.height << 16,
				DRM_MODE_ROTATE_270);

	return intel_plane_check_stride(plane_state);
}

static int i9xx_format_to_fourcc(int format)
{
	switch (format) {
	case DISPPLANE_8BPP:
		return DRM_FORMAT_C8;
	case DISPPLANE_BGRA555:
		return DRM_FORMAT_ARGB1555;
	case DISPPLANE_BGRX555:
		return DRM_FORMAT_XRGB1555;
	case DISPPLANE_BGRX565:
		return DRM_FORMAT_RGB565;
	default:
	case DISPPLANE_BGRX888:
		return DRM_FORMAT_XRGB8888;
	case DISPPLANE_RGBX888:
		return DRM_FORMAT_XBGR8888;
	case DISPPLANE_BGRA888:
		return DRM_FORMAT_ARGB8888;
	case DISPPLANE_RGBA888:
		return DRM_FORMAT_ABGR8888;
	case DISPPLANE_BGRX101010:
		return DRM_FORMAT_XRGB2101010;
	case DISPPLANE_RGBX101010:
		return DRM_FORMAT_XBGR2101010;
	case DISPPLANE_BGRA101010:
		return DRM_FORMAT_ARGB2101010;
	case DISPPLANE_RGBA101010:
		return DRM_FORMAT_ABGR2101010;
	case DISPPLANE_RGBX161616:
		return DRM_FORMAT_XBGR16161616F;
	}
}

int skl_format_to_fourcc(int format, bool rgb_order, bool alpha)
{
	switch (format) {
	case PLANE_CTL_FORMAT_RGB_565:
		return DRM_FORMAT_RGB565;
	case PLANE_CTL_FORMAT_NV12:
		return DRM_FORMAT_NV12;
	case PLANE_CTL_FORMAT_XYUV:
		return DRM_FORMAT_XYUV8888;
	case PLANE_CTL_FORMAT_P010:
		return DRM_FORMAT_P010;
	case PLANE_CTL_FORMAT_P012:
		return DRM_FORMAT_P012;
	case PLANE_CTL_FORMAT_P016:
		return DRM_FORMAT_P016;
	case PLANE_CTL_FORMAT_Y210:
		return DRM_FORMAT_Y210;
	case PLANE_CTL_FORMAT_Y212:
		return DRM_FORMAT_Y212;
	case PLANE_CTL_FORMAT_Y216:
		return DRM_FORMAT_Y216;
	case PLANE_CTL_FORMAT_Y410:
		return DRM_FORMAT_XVYU2101010;
	case PLANE_CTL_FORMAT_Y412:
		return DRM_FORMAT_XVYU12_16161616;
	case PLANE_CTL_FORMAT_Y416:
		return DRM_FORMAT_XVYU16161616;
	default:
	case PLANE_CTL_FORMAT_XRGB_8888:
		if (rgb_order) {
			if (alpha)
				return DRM_FORMAT_ABGR8888;
			else
				return DRM_FORMAT_XBGR8888;
		} else {
			if (alpha)
				return DRM_FORMAT_ARGB8888;
			else
				return DRM_FORMAT_XRGB8888;
		}
	case PLANE_CTL_FORMAT_XRGB_2101010:
		if (rgb_order) {
			if (alpha)
				return DRM_FORMAT_ABGR2101010;
			else
				return DRM_FORMAT_XBGR2101010;
		} else {
			if (alpha)
				return DRM_FORMAT_ARGB2101010;
			else
				return DRM_FORMAT_XRGB2101010;
		}
	case PLANE_CTL_FORMAT_XRGB_16161616F:
		if (rgb_order) {
			if (alpha)
				return DRM_FORMAT_ABGR16161616F;
			else
				return DRM_FORMAT_XBGR16161616F;
		} else {
			if (alpha)
				return DRM_FORMAT_ARGB16161616F;
			else
				return DRM_FORMAT_XRGB16161616F;
		}
	}
}

static struct i915_vma *
initial_plane_vma(struct drm_i915_private *i915,
		  struct intel_initial_plane_config *plane_config)
{
	struct drm_i915_gem_object *obj;
	struct i915_vma *vma;
	u32 base, size;

	if (plane_config->size == 0)
		return NULL;

	base = round_down(plane_config->base,
			  I915_GTT_MIN_ALIGNMENT);
	size = round_up(plane_config->base + plane_config->size,
			I915_GTT_MIN_ALIGNMENT);
	size -= base;

	/*
	 * If the FB is too big, just don't use it since fbdev is not very
	 * important and we should probably use that space with FBC or other
	 * features.
	 */
	if (size * 2 > i915->stolen_usable_size)
		return NULL;

	obj = i915_gem_object_create_stolen_for_preallocated(i915, base, size);
	if (IS_ERR(obj))
		return NULL;

	/*
	 * Mark it WT ahead of time to avoid changing the
	 * cache_level during fbdev initialization. The
	 * unbind there would get stuck waiting for rcu.
	 */
	i915_gem_object_set_cache_coherency(obj, HAS_WT(i915) ?
					    I915_CACHE_WT : I915_CACHE_NONE);

	switch (plane_config->tiling) {
	case I915_TILING_NONE:
		break;
	case I915_TILING_X:
	case I915_TILING_Y:
		obj->tiling_and_stride =
			plane_config->fb->base.pitches[0] |
			plane_config->tiling;
		break;
	default:
		MISSING_CASE(plane_config->tiling);
		goto err_obj;
	}

	vma = i915_vma_instance(obj, &i915->ggtt.vm, NULL);
	if (IS_ERR(vma))
		goto err_obj;

	if (i915_ggtt_pin(vma, NULL, 0, PIN_MAPPABLE | PIN_OFFSET_FIXED | base))
		goto err_obj;

	if (i915_gem_object_is_tiled(obj) &&
	    !i915_vma_is_map_and_fenceable(vma))
		goto err_obj;

	return vma;

err_obj:
	i915_gem_object_put(obj);
	return NULL;
}

static bool
intel_alloc_initial_plane_obj(struct intel_crtc *crtc,
			      struct intel_initial_plane_config *plane_config)
{
	struct drm_device *dev = crtc->base.dev;
	struct drm_i915_private *dev_priv = to_i915(dev);
	struct drm_mode_fb_cmd2 mode_cmd = { 0 };
	struct drm_framebuffer *fb = &plane_config->fb->base;
	struct i915_vma *vma;

	switch (fb->modifier) {
	case DRM_FORMAT_MOD_LINEAR:
	case I915_FORMAT_MOD_X_TILED:
	case I915_FORMAT_MOD_Y_TILED:
		break;
	default:
		drm_dbg(&dev_priv->drm,
			"Unsupported modifier for initial FB: 0x%llx\n",
			fb->modifier);
		return false;
	}

	vma = initial_plane_vma(dev_priv, plane_config);
	if (!vma)
		return false;

	mode_cmd.pixel_format = fb->format->format;
	mode_cmd.width = fb->width;
	mode_cmd.height = fb->height;
	mode_cmd.pitches[0] = fb->pitches[0];
	mode_cmd.modifier[0] = fb->modifier;
	mode_cmd.flags = DRM_MODE_FB_MODIFIERS;

	if (intel_framebuffer_init(to_intel_framebuffer(fb),
				   vma->obj, &mode_cmd)) {
		drm_dbg_kms(&dev_priv->drm, "intel fb init failed\n");
		goto err_vma;
	}

	plane_config->vma = vma;
	return true;

err_vma:
	i915_vma_put(vma);
	return false;
}

static void
intel_set_plane_visible(struct intel_crtc_state *crtc_state,
			struct intel_plane_state *plane_state,
			bool visible)
{
	struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane);

	plane_state->uapi.visible = visible;

	if (visible)
		crtc_state->uapi.plane_mask |= drm_plane_mask(&plane->base);
	else
		crtc_state->uapi.plane_mask &= ~drm_plane_mask(&plane->base);
}

static void fixup_active_planes(struct intel_crtc_state *crtc_state)
{
	struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);
	struct drm_plane *plane;

	/*
	 * Active_planes aliases if multiple "primary" or cursor planes
	 * have been used on the same (or wrong) pipe. plane_mask uses
	 * unique ids, hence we can use that to reconstruct active_planes.
	 */
	crtc_state->active_planes = 0;

	drm_for_each_plane_mask(plane, &dev_priv->drm,
				crtc_state->uapi.plane_mask)
		crtc_state->active_planes |= BIT(to_intel_plane(plane)->id);
}

static void intel_plane_disable_noatomic(struct intel_crtc *crtc,
					 struct intel_plane *plane)
{
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	struct intel_crtc_state *crtc_state =
		to_intel_crtc_state(crtc->base.state);
	struct intel_plane_state *plane_state =
		to_intel_plane_state(plane->base.state);

	drm_dbg_kms(&dev_priv->drm,
		    "Disabling [PLANE:%d:%s] on [CRTC:%d:%s]\n",
		    plane->base.base.id, plane->base.name,
		    crtc->base.base.id, crtc->base.name);

	intel_set_plane_visible(crtc_state, plane_state, false);
	fixup_active_planes(crtc_state);
	crtc_state->data_rate[plane->id] = 0;
	crtc_state->min_cdclk[plane->id] = 0;

	if (plane->id == PLANE_PRIMARY)
		hsw_disable_ips(crtc_state);

	/*
	 * Vblank time updates from the shadow to live plane control register
	 * are blocked if the memory self-refresh mode is active at that
	 * moment. So to make sure the plane gets truly disabled, disable
	 * first the self-refresh mode. The self-refresh enable bit in turn
	 * will be checked/applied by the HW only at the next frame start
	 * event which is after the vblank start event, so we need to have a
	 * wait-for-vblank between disabling the plane and the pipe.
	 */
	if (HAS_GMCH(dev_priv) &&
	    intel_set_memory_cxsr(dev_priv, false))
		intel_wait_for_vblank(dev_priv, crtc->pipe);

	/*
	 * Gen2 reports pipe underruns whenever all planes are disabled.
	 * So disable underrun reporting before all the planes get disabled.
	 */
	if (IS_GEN(dev_priv, 2) && !crtc_state->active_planes)
		intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe, false);

	intel_disable_plane(plane, crtc_state);
}

static struct intel_frontbuffer *
to_intel_frontbuffer(struct drm_framebuffer *fb)
{
	return fb ? to_intel_framebuffer(fb)->frontbuffer : NULL;
}

static void
intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
			     struct intel_initial_plane_config *plane_config)
{
	struct drm_device *dev = intel_crtc->base.dev;
	struct drm_i915_private *dev_priv = to_i915(dev);
	struct drm_crtc *c;
	struct drm_plane *primary = intel_crtc->base.primary;
	struct drm_plane_state *plane_state = primary->state;
	struct intel_plane *intel_plane = to_intel_plane(primary);
	struct intel_plane_state *intel_state =
		to_intel_plane_state(plane_state);
	struct drm_framebuffer *fb;
	struct i915_vma *vma;

	if (!plane_config->fb)
		return;

	if (intel_alloc_initial_plane_obj(intel_crtc, plane_config)) {
		fb = &plane_config->fb->base;
		vma = plane_config->vma;
		goto valid_fb;
	}

	/*
	 * Failed to alloc the obj, check to see if we should share
	 * an fb with another CRTC instead
	 */
	for_each_crtc(dev, c) {
		struct intel_plane_state *state;

		if (c == &intel_crtc->base)
			continue;

		if (!to_intel_crtc(c)->active)
			continue;

		state = to_intel_plane_state(c->primary->state);
		if (!state->vma)
			continue;

		if (intel_plane_ggtt_offset(state) == plane_config->base) {
			fb = state->hw.fb;
			vma = state->vma;
			goto valid_fb;
		}
	}

	/*
	 * We've failed to reconstruct the BIOS FB.  Current display state
	 * indicates that the primary plane is visible, but has a NULL FB,
	 * which will lead to problems later if we don't fix it up.  The
	 * simplest solution is to just disable the primary plane now and
	 * pretend the BIOS never had it enabled.
	 */
	intel_plane_disable_noatomic(intel_crtc, intel_plane);

	return;

valid_fb:
	intel_state->hw.rotation = plane_config->rotation;
	intel_fill_fb_ggtt_view(&intel_state->view, fb,
				intel_state->hw.rotation);
	intel_state->color_plane[0].stride =
		intel_fb_pitch(fb, 0, intel_state->hw.rotation);

	__i915_vma_pin(vma);
	intel_state->vma = i915_vma_get(vma);
	if (intel_plane_uses_fence(intel_state) && i915_vma_pin_fence(vma) == 0)
		if (vma->fence)
			intel_state->flags |= PLANE_HAS_FENCE;

	plane_state->src_x = 0;
	plane_state->src_y = 0;
	plane_state->src_w = fb->width << 16;
	plane_state->src_h = fb->height << 16;

	plane_state->crtc_x = 0;
	plane_state->crtc_y = 0;
	plane_state->crtc_w = fb->width;
	plane_state->crtc_h = fb->height;

	intel_state->uapi.src = drm_plane_state_src(plane_state);
	intel_state->uapi.dst = drm_plane_state_dest(plane_state);

	if (plane_config->tiling)
		dev_priv->preserve_bios_swizzle = true;

	plane_state->fb = fb;
	drm_framebuffer_get(fb);

	plane_state->crtc = &intel_crtc->base;
	intel_plane_copy_uapi_to_hw_state(intel_state, intel_state);

	intel_frontbuffer_flush(to_intel_frontbuffer(fb), ORIGIN_DIRTYFB);

	atomic_or(to_intel_plane(primary)->frontbuffer_bit,
		  &to_intel_frontbuffer(fb)->bits);
}

static int skl_max_plane_width(const struct drm_framebuffer *fb,
			       int color_plane,
			       unsigned int rotation)
{
	int cpp = fb->format->cpp[color_plane];

	switch (fb->modifier) {
	case DRM_FORMAT_MOD_LINEAR:
	case I915_FORMAT_MOD_X_TILED:
		/*
		 * Validated limit is 4k, but has 5k should
		 * work apart from the following features:
		 * - Ytile (already limited to 4k)
		 * - FP16 (already limited to 4k)
		 * - render compression (already limited to 4k)
		 * - KVMR sprite and cursor (don't care)
		 * - horizontal panning (TODO verify this)
		 * - pipe and plane scaling (TODO verify this)
		 */
		if (cpp == 8)
			return 4096;
		else
			return 5120;
	case I915_FORMAT_MOD_Y_TILED_CCS:
	case I915_FORMAT_MOD_Yf_TILED_CCS:
	case I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS:
		/* FIXME AUX plane? */
	case I915_FORMAT_MOD_Y_TILED:
	case I915_FORMAT_MOD_Yf_TILED:
		if (cpp == 8)
			return 2048;
		else
			return 4096;
	default:
		MISSING_CASE(fb->modifier);
		return 2048;
	}
}

static int glk_max_plane_width(const struct drm_framebuffer *fb,
			       int color_plane,
			       unsigned int rotation)
{
	int cpp = fb->format->cpp[color_plane];

	switch (fb->modifier) {
	case DRM_FORMAT_MOD_LINEAR:
	case I915_FORMAT_MOD_X_TILED:
		if (cpp == 8)
			return 4096;
		else
			return 5120;
	case I915_FORMAT_MOD_Y_TILED_CCS:
	case I915_FORMAT_MOD_Yf_TILED_CCS:
		/* FIXME AUX plane? */
	case I915_FORMAT_MOD_Y_TILED:
	case I915_FORMAT_MOD_Yf_TILED:
		if (cpp == 8)
			return 2048;
		else
			return 5120;
	default:
		MISSING_CASE(fb->modifier);
		return 2048;
	}
}

static int icl_min_plane_width(const struct drm_framebuffer *fb)
{
	/* Wa_14011264657, Wa_14011050563: gen11+ */
	switch (fb->format->format) {
	case DRM_FORMAT_C8:
		return 18;
	case DRM_FORMAT_RGB565:
		return 10;
	case DRM_FORMAT_XRGB8888:
	case DRM_FORMAT_XBGR8888:
	case DRM_FORMAT_ARGB8888:
	case DRM_FORMAT_ABGR8888:
	case DRM_FORMAT_XRGB2101010:
	case DRM_FORMAT_XBGR2101010:
	case DRM_FORMAT_ARGB2101010:
	case DRM_FORMAT_ABGR2101010:
	case DRM_FORMAT_XVYU2101010:
	case DRM_FORMAT_Y212:
	case DRM_FORMAT_Y216:
		return 6;
	case DRM_FORMAT_NV12:
		return 20;
	case DRM_FORMAT_P010:
	case DRM_FORMAT_P012:
	case DRM_FORMAT_P016:
		return 12;
	case DRM_FORMAT_XRGB16161616F:
	case DRM_FORMAT_XBGR16161616F:
	case DRM_FORMAT_ARGB16161616F:
	case DRM_FORMAT_ABGR16161616F:
	case DRM_FORMAT_XVYU12_16161616:
	case DRM_FORMAT_XVYU16161616:
		return 4;
	default:
		return 1;
	}
}

static int icl_max_plane_width(const struct drm_framebuffer *fb,
			       int color_plane,
			       unsigned int rotation)
{
	return 5120;
}

static int skl_max_plane_height(void)
{
	return 4096;
}

static int icl_max_plane_height(void)
{
	return 4320;
}

static bool
skl_check_main_ccs_coordinates(struct intel_plane_state *plane_state,
			       int main_x, int main_y, u32 main_offset,
			       int ccs_plane)
{
	const struct drm_framebuffer *fb = plane_state->hw.fb;
	int aux_x = plane_state->color_plane[ccs_plane].x;
	int aux_y = plane_state->color_plane[ccs_plane].y;
	u32 aux_offset = plane_state->color_plane[ccs_plane].offset;
	u32 alignment = intel_surf_alignment(fb, ccs_plane);
	int hsub;
	int vsub;

	intel_fb_plane_get_subsampling(&hsub, &vsub, fb, ccs_plane);
	while (aux_offset >= main_offset && aux_y <= main_y) {
		int x, y;

		if (aux_x == main_x && aux_y == main_y)
			break;

		if (aux_offset == 0)
			break;

		x = aux_x / hsub;
		y = aux_y / vsub;
		aux_offset = intel_plane_adjust_aligned_offset(&x, &y,
							       plane_state,
							       ccs_plane,
							       aux_offset,
							       aux_offset -
								alignment);
		aux_x = x * hsub + aux_x % hsub;
		aux_y = y * vsub + aux_y % vsub;
	}

	if (aux_x != main_x || aux_y != main_y)
		return false;

	plane_state->color_plane[ccs_plane].offset = aux_offset;
	plane_state->color_plane[ccs_plane].x = aux_x;
	plane_state->color_plane[ccs_plane].y = aux_y;

	return true;
}

unsigned int
intel_plane_fence_y_offset(const struct intel_plane_state *plane_state)
{
	int x = 0, y = 0;

	intel_plane_adjust_aligned_offset(&x, &y, plane_state, 0,
					  plane_state->color_plane[0].offset, 0);

	return y;
}

static int skl_check_main_surface(struct intel_plane_state *plane_state)
{
	struct drm_i915_private *dev_priv = to_i915(plane_state->uapi.plane->dev);
	const struct drm_framebuffer *fb = plane_state->hw.fb;
	unsigned int rotation = plane_state->hw.rotation;
	int x = plane_state->uapi.src.x1 >> 16;
	int y = plane_state->uapi.src.y1 >> 16;
	int w = drm_rect_width(&plane_state->uapi.src) >> 16;
	int h = drm_rect_height(&plane_state->uapi.src) >> 16;
	int max_width, min_width, max_height;
	u32 alignment, offset;
	int aux_plane = intel_main_to_aux_plane(fb, 0);
	u32 aux_offset = plane_state->color_plane[aux_plane].offset;

	if (INTEL_GEN(dev_priv) >= 11) {
		max_width = icl_max_plane_width(fb, 0, rotation);
		min_width = icl_min_plane_width(fb);
	} else if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) {
		max_width = glk_max_plane_width(fb, 0, rotation);
		min_width = 1;
	} else {
		max_width = skl_max_plane_width(fb, 0, rotation);
		min_width = 1;
	}

	if (INTEL_GEN(dev_priv) >= 11)
		max_height = icl_max_plane_height();
	else
		max_height = skl_max_plane_height();

	if (w > max_width || w < min_width || h > max_height) {
		drm_dbg_kms(&dev_priv->drm,
			    "requested Y/RGB source size %dx%d outside limits (min: %dx1 max: %dx%d)\n",
			    w, h, min_width, max_width, max_height);
		return -EINVAL;
	}

	intel_add_fb_offsets(&x, &y, plane_state, 0);
	offset = intel_plane_compute_aligned_offset(&x, &y, plane_state, 0);
	alignment = intel_surf_alignment(fb, 0);
	if (drm_WARN_ON(&dev_priv->drm, alignment && !is_power_of_2(alignment)))
		return -EINVAL;

	/*
	 * AUX surface offset is specified as the distance from the
	 * main surface offset, and it must be non-negative. Make
	 * sure that is what we will get.
	 */
	if (offset > aux_offset)
		offset = intel_plane_adjust_aligned_offset(&x, &y, plane_state, 0,
							   offset, aux_offset & ~(alignment - 1));

	/*
	 * When using an X-tiled surface, the plane blows up
	 * if the x offset + width exceed the stride.
	 *
	 * TODO: linear and Y-tiled seem fine, Yf untested,
	 */
	if (fb->modifier == I915_FORMAT_MOD_X_TILED) {
		int cpp = fb->format->cpp[0];

		while ((x + w) * cpp > plane_state->color_plane[0].stride) {
			if (offset == 0) {
				drm_dbg_kms(&dev_priv->drm,
					    "Unable to find suitable display surface offset due to X-tiling\n");
				return -EINVAL;
			}

			offset = intel_plane_adjust_aligned_offset(&x, &y, plane_state, 0,
								   offset, offset - alignment);
		}
	}

	/*
	 * CCS AUX surface doesn't have its own x/y offsets, we must make sure
	 * they match with the main surface x/y offsets.
	 */
	if (is_ccs_modifier(fb->modifier)) {
		while (!skl_check_main_ccs_coordinates(plane_state, x, y,
						       offset, aux_plane)) {
			if (offset == 0)
				break;

			offset = intel_plane_adjust_aligned_offset(&x, &y, plane_state, 0,
								   offset, offset - alignment);
		}

		if (x != plane_state->color_plane[aux_plane].x ||
		    y != plane_state->color_plane[aux_plane].y) {
			drm_dbg_kms(&dev_priv->drm,
				    "Unable to find suitable display surface offset due to CCS\n");
			return -EINVAL;
		}
	}

	plane_state->color_plane[0].offset = offset;
	plane_state->color_plane[0].x = x;
	plane_state->color_plane[0].y = y;

	/*
	 * Put the final coordinates back so that the src
	 * coordinate checks will see the right values.
	 */
	drm_rect_translate_to(&plane_state->uapi.src,
			      x << 16, y << 16);

	return 0;
}

static int skl_check_nv12_aux_surface(struct intel_plane_state *plane_state)
{
	struct drm_i915_private *i915 = to_i915(plane_state->uapi.plane->dev);
	const struct drm_framebuffer *fb = plane_state->hw.fb;
	unsigned int rotation = plane_state->hw.rotation;
	int uv_plane = 1;
	int max_width = skl_max_plane_width(fb, uv_plane, rotation);
	int max_height = 4096;
	int x = plane_state->uapi.src.x1 >> 17;
	int y = plane_state->uapi.src.y1 >> 17;
	int w = drm_rect_width(&plane_state->uapi.src) >> 17;
	int h = drm_rect_height(&plane_state->uapi.src) >> 17;
	u32 offset;

	intel_add_fb_offsets(&x, &y, plane_state, uv_plane);
	offset = intel_plane_compute_aligned_offset(&x, &y,
						    plane_state, uv_plane);

	/* FIXME not quite sure how/if these apply to the chroma plane */
	if (w > max_width || h > max_height) {
		drm_dbg_kms(&i915->drm,
			    "CbCr source size %dx%d too big (limit %dx%d)\n",
			    w, h, max_width, max_height);
		return -EINVAL;
	}

	if (is_ccs_modifier(fb->modifier)) {
		int ccs_plane = main_to_ccs_plane(fb, uv_plane);
		int aux_offset = plane_state->color_plane[ccs_plane].offset;
		int alignment = intel_surf_alignment(fb, uv_plane);

		if (offset > aux_offset)
			offset = intel_plane_adjust_aligned_offset(&x, &y,
								   plane_state,
								   uv_plane,
								   offset,
								   aux_offset & ~(alignment - 1));

		while (!skl_check_main_ccs_coordinates(plane_state, x, y,
						       offset, ccs_plane)) {
			if (offset == 0)
				break;

			offset = intel_plane_adjust_aligned_offset(&x, &y,
								   plane_state,
								   uv_plane,
								   offset, offset - alignment);
		}

		if (x != plane_state->color_plane[ccs_plane].x ||
		    y != plane_state->color_plane[ccs_plane].y) {
			drm_dbg_kms(&i915->drm,
				    "Unable to find suitable display surface offset due to CCS\n");
			return -EINVAL;
		}
	}

	plane_state->color_plane[uv_plane].offset = offset;
	plane_state->color_plane[uv_plane].x = x;
	plane_state->color_plane[uv_plane].y = y;

	return 0;
}

static int skl_check_ccs_aux_surface(struct intel_plane_state *plane_state)
{
	const struct drm_framebuffer *fb = plane_state->hw.fb;
	int src_x = plane_state->uapi.src.x1 >> 16;
	int src_y = plane_state->uapi.src.y1 >> 16;
	u32 offset;
	int ccs_plane;

	for (ccs_plane = 0; ccs_plane < fb->format->num_planes; ccs_plane++) {
		int main_hsub, main_vsub;
		int hsub, vsub;
		int x, y;

		if (!is_ccs_plane(fb, ccs_plane))
			continue;

		intel_fb_plane_get_subsampling(&main_hsub, &main_vsub, fb,
					       ccs_to_main_plane(fb, ccs_plane));
		intel_fb_plane_get_subsampling(&hsub, &vsub, fb, ccs_plane);

		hsub *= main_hsub;
		vsub *= main_vsub;
		x = src_x / hsub;
		y = src_y / vsub;

		intel_add_fb_offsets(&x, &y, plane_state, ccs_plane);

		offset = intel_plane_compute_aligned_offset(&x, &y,
							    plane_state,
							    ccs_plane);

		plane_state->color_plane[ccs_plane].offset = offset;
		plane_state->color_plane[ccs_plane].x = (x * hsub +
							 src_x % hsub) /
							main_hsub;
		plane_state->color_plane[ccs_plane].y = (y * vsub +
							 src_y % vsub) /
							main_vsub;
	}

	return 0;
}

int skl_check_plane_surface(struct intel_plane_state *plane_state)
{
	const struct drm_framebuffer *fb = plane_state->hw.fb;
	int ret, i;

	ret = intel_plane_compute_gtt(plane_state);
	if (ret)
		return ret;

	if (!plane_state->uapi.visible)
		return 0;

	/*
	 * Handle the AUX surface first since the main surface setup depends on
	 * it.
	 */
	if (is_ccs_modifier(fb->modifier)) {
		ret = skl_check_ccs_aux_surface(plane_state);
		if (ret)
			return ret;
	}

	if (intel_format_info_is_yuv_semiplanar(fb->format,
						fb->modifier)) {
		ret = skl_check_nv12_aux_surface(plane_state);
		if (ret)
			return ret;
	}

	for (i = fb->format->num_planes; i < ARRAY_SIZE(plane_state->color_plane); i++) {
		plane_state->color_plane[i].offset = ~0xfff;
		plane_state->color_plane[i].x = 0;
		plane_state->color_plane[i].y = 0;
	}

	ret = skl_check_main_surface(plane_state);
	if (ret)
		return ret;

	return 0;
}

static void i9xx_plane_ratio(const struct intel_crtc_state *crtc_state,
			     const struct intel_plane_state *plane_state,
			     unsigned int *num, unsigned int *den)
{
	const struct drm_framebuffer *fb = plane_state->hw.fb;
	unsigned int cpp = fb->format->cpp[0];

	/*
	 * g4x bspec says 64bpp pixel rate can't exceed 80%
	 * of cdclk when the sprite plane is enabled on the
	 * same pipe. ilk/snb bspec says 64bpp pixel rate is
	 * never allowed to exceed 80% of cdclk. Let's just go
	 * with the ilk/snb limit always.
	 */
	if (cpp == 8) {
		*num = 10;
		*den = 8;
	} else {
		*num = 1;
		*den = 1;
	}
}

static int i9xx_plane_min_cdclk(const struct intel_crtc_state *crtc_state,
				const struct intel_plane_state *plane_state)
{
	unsigned int pixel_rate;
	unsigned int num, den;

	/*
	 * Note that crtc_state->pixel_rate accounts for both
	 * horizontal and vertical panel fitter downscaling factors.
	 * Pre-HSW bspec tells us to only consider the horizontal
	 * downscaling factor here. We ignore that and just consider
	 * both for simplicity.
	 */
	pixel_rate = crtc_state->pixel_rate;

	i9xx_plane_ratio(crtc_state, plane_state, &num, &den);

	/* two pixels per clock with double wide pipe */
	if (crtc_state->double_wide)
		den *= 2;

	return DIV_ROUND_UP(pixel_rate * num, den);
}

unsigned int
i9xx_plane_max_stride(struct intel_plane *plane,
		      u32 pixel_format, u64 modifier,
		      unsigned int rotation)
{
	struct drm_i915_private *dev_priv = to_i915(plane->base.dev);

	if (!HAS_GMCH(dev_priv)) {
		return 32*1024;
	} else if (INTEL_GEN(dev_priv) >= 4) {
		if (modifier == I915_FORMAT_MOD_X_TILED)
			return 16*1024;
		else
			return 32*1024;
	} else if (INTEL_GEN(dev_priv) >= 3) {
		if (modifier == I915_FORMAT_MOD_X_TILED)
			return 8*1024;
		else
			return 16*1024;
	} else {
		if (plane->i9xx_plane == PLANE_C)
			return 4*1024;
		else
			return 8*1024;
	}
}

static u32 i9xx_plane_ctl_crtc(const struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	u32 dspcntr = 0;

	if (crtc_state->gamma_enable)
		dspcntr |= DISPPLANE_GAMMA_ENABLE;

	if (crtc_state->csc_enable)
		dspcntr |= DISPPLANE_PIPE_CSC_ENABLE;

	if (INTEL_GEN(dev_priv) < 5)
		dspcntr |= DISPPLANE_SEL_PIPE(crtc->pipe);

	return dspcntr;
}

static u32 i9xx_plane_ctl(const struct intel_crtc_state *crtc_state,
			  const struct intel_plane_state *plane_state)
{
	struct drm_i915_private *dev_priv =
		to_i915(plane_state->uapi.plane->dev);
	const struct drm_framebuffer *fb = plane_state->hw.fb;
	unsigned int rotation = plane_state->hw.rotation;
	u32 dspcntr;

	dspcntr = DISPLAY_PLANE_ENABLE;

	if (IS_G4X(dev_priv) || IS_GEN(dev_priv, 5) ||
	    IS_GEN(dev_priv, 6) || IS_IVYBRIDGE(dev_priv))
		dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;

	switch (fb->format->format) {
	case DRM_FORMAT_C8:
		dspcntr |= DISPPLANE_8BPP;
		break;
	case DRM_FORMAT_XRGB1555:
		dspcntr |= DISPPLANE_BGRX555;
		break;
	case DRM_FORMAT_ARGB1555:
		dspcntr |= DISPPLANE_BGRA555;
		break;
	case DRM_FORMAT_RGB565:
		dspcntr |= DISPPLANE_BGRX565;
		break;
	case DRM_FORMAT_XRGB8888:
		dspcntr |= DISPPLANE_BGRX888;
		break;
	case DRM_FORMAT_XBGR8888:
		dspcntr |= DISPPLANE_RGBX888;
		break;
	case DRM_FORMAT_ARGB8888:
		dspcntr |= DISPPLANE_BGRA888;
		break;
	case DRM_FORMAT_ABGR8888:
		dspcntr |= DISPPLANE_RGBA888;
		break;
	case DRM_FORMAT_XRGB2101010:
		dspcntr |= DISPPLANE_BGRX101010;
		break;
	case DRM_FORMAT_XBGR2101010:
		dspcntr |= DISPPLANE_RGBX101010;
		break;
	case DRM_FORMAT_ARGB2101010:
		dspcntr |= DISPPLANE_BGRA101010;
		break;
	case DRM_FORMAT_ABGR2101010:
		dspcntr |= DISPPLANE_RGBA101010;
		break;
	case DRM_FORMAT_XBGR16161616F:
		dspcntr |= DISPPLANE_RGBX161616;
		break;
	default:
		MISSING_CASE(fb->format->format);
		return 0;
	}

	if (INTEL_GEN(dev_priv) >= 4 &&
	    fb->modifier == I915_FORMAT_MOD_X_TILED)
		dspcntr |= DISPPLANE_TILED;

	if (rotation & DRM_MODE_ROTATE_180)
		dspcntr |= DISPPLANE_ROTATE_180;

	if (rotation & DRM_MODE_REFLECT_X)
		dspcntr |= DISPPLANE_MIRROR;

	return dspcntr;
}

int i9xx_check_plane_surface(struct intel_plane_state *plane_state)
{
	struct drm_i915_private *dev_priv =
		to_i915(plane_state->uapi.plane->dev);
	const struct drm_framebuffer *fb = plane_state->hw.fb;
	int src_x, src_y, src_w;
	u32 offset;
	int ret;

	ret = intel_plane_compute_gtt(plane_state);
	if (ret)
		return ret;

	if (!plane_state->uapi.visible)
		return 0;

	src_w = drm_rect_width(&plane_state->uapi.src) >> 16;
	src_x = plane_state->uapi.src.x1 >> 16;
	src_y = plane_state->uapi.src.y1 >> 16;

	/* Undocumented hardware limit on i965/g4x/vlv/chv */
	if (HAS_GMCH(dev_priv) && fb->format->cpp[0] == 8 && src_w > 2048)
		return -EINVAL;

	intel_add_fb_offsets(&src_x, &src_y, plane_state, 0);

	if (INTEL_GEN(dev_priv) >= 4)
		offset = intel_plane_compute_aligned_offset(&src_x, &src_y,
							    plane_state, 0);
	else
		offset = 0;

	/*
	 * Put the final coordinates back so that the src
	 * coordinate checks will see the right values.
	 */
	drm_rect_translate_to(&plane_state->uapi.src,
			      src_x << 16, src_y << 16);

	/* HSW/BDW do this automagically in hardware */
	if (!IS_HASWELL(dev_priv) && !IS_BROADWELL(dev_priv)) {
		unsigned int rotation = plane_state->hw.rotation;
		int src_w = drm_rect_width(&plane_state->uapi.src) >> 16;
		int src_h = drm_rect_height(&plane_state->uapi.src) >> 16;

		if (rotation & DRM_MODE_ROTATE_180) {
			src_x += src_w - 1;
			src_y += src_h - 1;
		} else if (rotation & DRM_MODE_REFLECT_X) {
			src_x += src_w - 1;
		}
	}

	plane_state->color_plane[0].offset = offset;
	plane_state->color_plane[0].x = src_x;
	plane_state->color_plane[0].y = src_y;

	return 0;
}

static bool i9xx_plane_has_windowing(struct intel_plane *plane)
{
	struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
	enum i9xx_plane_id i9xx_plane = plane->i9xx_plane;

	if (IS_CHERRYVIEW(dev_priv))
		return i9xx_plane == PLANE_B;
	else if (INTEL_GEN(dev_priv) >= 5 || IS_G4X(dev_priv))
		return false;
	else if (IS_GEN(dev_priv, 4))
		return i9xx_plane == PLANE_C;
	else
		return i9xx_plane == PLANE_B ||
			i9xx_plane == PLANE_C;
}

static int
i9xx_plane_check(struct intel_crtc_state *crtc_state,
		 struct intel_plane_state *plane_state)
{
	struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane);
	int ret;

	ret = chv_plane_check_rotation(plane_state);
	if (ret)
		return ret;

	ret = drm_atomic_helper_check_plane_state(&plane_state->uapi,
						  &crtc_state->uapi,
						  DRM_PLANE_HELPER_NO_SCALING,
						  DRM_PLANE_HELPER_NO_SCALING,
						  i9xx_plane_has_windowing(plane),
						  true);
	if (ret)
		return ret;

	ret = i9xx_check_plane_surface(plane_state);
	if (ret)
		return ret;

	if (!plane_state->uapi.visible)
		return 0;

	ret = intel_plane_check_src_coordinates(plane_state);
	if (ret)
		return ret;

	plane_state->ctl = i9xx_plane_ctl(crtc_state, plane_state);

	return 0;
}

static void i9xx_update_plane(struct intel_plane *plane,
			      const struct intel_crtc_state *crtc_state,
			      const struct intel_plane_state *plane_state)
{
	struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
	enum i9xx_plane_id i9xx_plane = plane->i9xx_plane;
	u32 linear_offset;
	int x = plane_state->color_plane[0].x;
	int y = plane_state->color_plane[0].y;
	int crtc_x = plane_state->uapi.dst.x1;
	int crtc_y = plane_state->uapi.dst.y1;
	int crtc_w = drm_rect_width(&plane_state->uapi.dst);
	int crtc_h = drm_rect_height(&plane_state->uapi.dst);
	unsigned long irqflags;
	u32 dspaddr_offset;
	u32 dspcntr;

	dspcntr = plane_state->ctl | i9xx_plane_ctl_crtc(crtc_state);

	linear_offset = intel_fb_xy_to_linear(x, y, plane_state, 0);

	if (INTEL_GEN(dev_priv) >= 4)
		dspaddr_offset = plane_state->color_plane[0].offset;
	else
		dspaddr_offset = linear_offset;

	spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);

	intel_de_write_fw(dev_priv, DSPSTRIDE(i9xx_plane),
			  plane_state->color_plane[0].stride);

	if (INTEL_GEN(dev_priv) < 4) {
		/*
		 * PLANE_A doesn't actually have a full window
		 * generator but let's assume we still need to
		 * program whatever is there.
		 */
		intel_de_write_fw(dev_priv, DSPPOS(i9xx_plane),
				  (crtc_y << 16) | crtc_x);
		intel_de_write_fw(dev_priv, DSPSIZE(i9xx_plane),
				  ((crtc_h - 1) << 16) | (crtc_w - 1));
	} else if (IS_CHERRYVIEW(dev_priv) && i9xx_plane == PLANE_B) {
		intel_de_write_fw(dev_priv, PRIMPOS(i9xx_plane),
				  (crtc_y << 16) | crtc_x);
		intel_de_write_fw(dev_priv, PRIMSIZE(i9xx_plane),
				  ((crtc_h - 1) << 16) | (crtc_w - 1));
		intel_de_write_fw(dev_priv, PRIMCNSTALPHA(i9xx_plane), 0);
	}

	if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
		intel_de_write_fw(dev_priv, DSPOFFSET(i9xx_plane),
				  (y << 16) | x);
	} else if (INTEL_GEN(dev_priv) >= 4) {
		intel_de_write_fw(dev_priv, DSPLINOFF(i9xx_plane),
				  linear_offset);
		intel_de_write_fw(dev_priv, DSPTILEOFF(i9xx_plane),
				  (y << 16) | x);
	}

	/*
	 * The control register self-arms if the plane was previously
	 * disabled. Try to make the plane enable atomic by writing
	 * the control register just before the surface register.
	 */
	intel_de_write_fw(dev_priv, DSPCNTR(i9xx_plane), dspcntr);
	if (INTEL_GEN(dev_priv) >= 4)
		intel_de_write_fw(dev_priv, DSPSURF(i9xx_plane),
				  intel_plane_ggtt_offset(plane_state) + dspaddr_offset);
	else
		intel_de_write_fw(dev_priv, DSPADDR(i9xx_plane),
				  intel_plane_ggtt_offset(plane_state) + dspaddr_offset);

	spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
}

static void i9xx_disable_plane(struct intel_plane *plane,
			       const struct intel_crtc_state *crtc_state)
{
	struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
	enum i9xx_plane_id i9xx_plane = plane->i9xx_plane;
	unsigned long irqflags;
	u32 dspcntr;

	/*
	 * DSPCNTR pipe gamma enable on g4x+ and pipe csc
	 * enable on ilk+ affect the pipe bottom color as
	 * well, so we must configure them even if the plane
	 * is disabled.
	 *
	 * On pre-g4x there is no way to gamma correct the
	 * pipe bottom color but we'll keep on doing this
	 * anyway so that the crtc state readout works correctly.
	 */
	dspcntr = i9xx_plane_ctl_crtc(crtc_state);

	spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);

	intel_de_write_fw(dev_priv, DSPCNTR(i9xx_plane), dspcntr);
	if (INTEL_GEN(dev_priv) >= 4)
		intel_de_write_fw(dev_priv, DSPSURF(i9xx_plane), 0);
	else
		intel_de_write_fw(dev_priv, DSPADDR(i9xx_plane), 0);

	spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
}

static bool i9xx_plane_get_hw_state(struct intel_plane *plane,
				    enum pipe *pipe)
{
	struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
	enum intel_display_power_domain power_domain;
	enum i9xx_plane_id i9xx_plane = plane->i9xx_plane;
	intel_wakeref_t wakeref;
	bool ret;
	u32 val;

	/*
	 * Not 100% correct for planes that can move between pipes,
	 * but that's only the case for gen2-4 which don't have any
	 * display power wells.
	 */
	power_domain = POWER_DOMAIN_PIPE(plane->pipe);
	wakeref = intel_display_power_get_if_enabled(dev_priv, power_domain);
	if (!wakeref)
		return false;

	val = intel_de_read(dev_priv, DSPCNTR(i9xx_plane));

	ret = val & DISPLAY_PLANE_ENABLE;

	if (INTEL_GEN(dev_priv) >= 5)
		*pipe = plane->pipe;
	else
		*pipe = (val & DISPPLANE_SEL_PIPE_MASK) >>
			DISPPLANE_SEL_PIPE_SHIFT;

	intel_display_power_put(dev_priv, power_domain, wakeref);

	return ret;
}

static void skl_detach_scaler(struct intel_crtc *intel_crtc, int id)
{
	struct drm_device *dev = intel_crtc->base.dev;
	struct drm_i915_private *dev_priv = to_i915(dev);
	unsigned long irqflags;

	spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);

	intel_de_write_fw(dev_priv, SKL_PS_CTRL(intel_crtc->pipe, id), 0);
	intel_de_write_fw(dev_priv, SKL_PS_WIN_POS(intel_crtc->pipe, id), 0);
	intel_de_write_fw(dev_priv, SKL_PS_WIN_SZ(intel_crtc->pipe, id), 0);

	spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
}

/*
 * This function detaches (aka. unbinds) unused scalers in hardware
 */
static void skl_detach_scalers(const struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->uapi.crtc);
	const struct intel_crtc_scaler_state *scaler_state =
		&crtc_state->scaler_state;
	int i;

	/* loop through and disable scalers that aren't in use */
	for (i = 0; i < intel_crtc->num_scalers; i++) {
		if (!scaler_state->scalers[i].in_use)
			skl_detach_scaler(intel_crtc, i);
	}
}

static unsigned int skl_plane_stride_mult(const struct drm_framebuffer *fb,
					  int color_plane, unsigned int rotation)
{
	/*
	 * The stride is either expressed as a multiple of 64 bytes chunks for
	 * linear buffers or in number of tiles for tiled buffers.
	 */
	if (is_surface_linear(fb, color_plane))
		return 64;
	else if (drm_rotation_90_or_270(rotation))
		return intel_tile_height(fb, color_plane);
	else
		return intel_tile_width_bytes(fb, color_plane);
}

u32 skl_plane_stride(const struct intel_plane_state *plane_state,
		     int color_plane)
{
	const struct drm_framebuffer *fb = plane_state->hw.fb;
	unsigned int rotation = plane_state->hw.rotation;
	u32 stride = plane_state->color_plane[color_plane].stride;

	if (color_plane >= fb->format->num_planes)
		return 0;

	return stride / skl_plane_stride_mult(fb, color_plane, rotation);
}

static u32 skl_plane_ctl_format(u32 pixel_format)
{
	switch (pixel_format) {
	case DRM_FORMAT_C8:
		return PLANE_CTL_FORMAT_INDEXED;
	case DRM_FORMAT_RGB565:
		return PLANE_CTL_FORMAT_RGB_565;
	case DRM_FORMAT_XBGR8888:
	case DRM_FORMAT_ABGR8888:
		return PLANE_CTL_FORMAT_XRGB_8888 | PLANE_CTL_ORDER_RGBX;
	case DRM_FORMAT_XRGB8888:
	case DRM_FORMAT_ARGB8888:
		return PLANE_CTL_FORMAT_XRGB_8888;
	case DRM_FORMAT_XBGR2101010:
	case DRM_FORMAT_ABGR2101010:
		return PLANE_CTL_FORMAT_XRGB_2101010 | PLANE_CTL_ORDER_RGBX;
	case DRM_FORMAT_XRGB2101010:
	case DRM_FORMAT_ARGB2101010:
		return PLANE_CTL_FORMAT_XRGB_2101010;
	case DRM_FORMAT_XBGR16161616F:
	case DRM_FORMAT_ABGR16161616F:
		return PLANE_CTL_FORMAT_XRGB_16161616F | PLANE_CTL_ORDER_RGBX;
	case DRM_FORMAT_XRGB16161616F:
	case DRM_FORMAT_ARGB16161616F:
		return PLANE_CTL_FORMAT_XRGB_16161616F;
	case DRM_FORMAT_XYUV8888:
		return PLANE_CTL_FORMAT_XYUV;
	case DRM_FORMAT_YUYV:
		return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_YUYV;
	case DRM_FORMAT_YVYU:
		return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_YVYU;
	case DRM_FORMAT_UYVY:
		return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_UYVY;
	case DRM_FORMAT_VYUY:
		return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_VYUY;
	case DRM_FORMAT_NV12:
		return PLANE_CTL_FORMAT_NV12;
	case DRM_FORMAT_P010:
		return PLANE_CTL_FORMAT_P010;
	case DRM_FORMAT_P012:
		return PLANE_CTL_FORMAT_P012;
	case DRM_FORMAT_P016:
		return PLANE_CTL_FORMAT_P016;
	case DRM_FORMAT_Y210:
		return PLANE_CTL_FORMAT_Y210;
	case DRM_FORMAT_Y212:
		return PLANE_CTL_FORMAT_Y212;
	case DRM_FORMAT_Y216:
		return PLANE_CTL_FORMAT_Y216;
	case DRM_FORMAT_XVYU2101010:
		return PLANE_CTL_FORMAT_Y410;
	case DRM_FORMAT_XVYU12_16161616:
		return PLANE_CTL_FORMAT_Y412;
	case DRM_FORMAT_XVYU16161616:
		return PLANE_CTL_FORMAT_Y416;
	default:
		MISSING_CASE(pixel_format);
	}

	return 0;
}

static u32 skl_plane_ctl_alpha(const struct intel_plane_state *plane_state)
{
	if (!plane_state->hw.fb->format->has_alpha)
		return PLANE_CTL_ALPHA_DISABLE;

	switch (plane_state->hw.pixel_blend_mode) {
	case DRM_MODE_BLEND_PIXEL_NONE:
		return PLANE_CTL_ALPHA_DISABLE;
	case DRM_MODE_BLEND_PREMULTI:
		return PLANE_CTL_ALPHA_SW_PREMULTIPLY;
	case DRM_MODE_BLEND_COVERAGE:
		return PLANE_CTL_ALPHA_HW_PREMULTIPLY;
	default:
		MISSING_CASE(plane_state->hw.pixel_blend_mode);
		return PLANE_CTL_ALPHA_DISABLE;
	}
}

static u32 glk_plane_color_ctl_alpha(const struct intel_plane_state *plane_state)
{
	if (!plane_state->hw.fb->format->has_alpha)
		return PLANE_COLOR_ALPHA_DISABLE;

	switch (plane_state->hw.pixel_blend_mode) {
	case DRM_MODE_BLEND_PIXEL_NONE:
		return PLANE_COLOR_ALPHA_DISABLE;
	case DRM_MODE_BLEND_PREMULTI:
		return PLANE_COLOR_ALPHA_SW_PREMULTIPLY;
	case DRM_MODE_BLEND_COVERAGE:
		return PLANE_COLOR_ALPHA_HW_PREMULTIPLY;
	default:
		MISSING_CASE(plane_state->hw.pixel_blend_mode);
		return PLANE_COLOR_ALPHA_DISABLE;
	}
}

static u32 skl_plane_ctl_tiling(u64 fb_modifier)
{
	switch (fb_modifier) {
	case DRM_FORMAT_MOD_LINEAR:
		break;
	case I915_FORMAT_MOD_X_TILED:
		return PLANE_CTL_TILED_X;
	case I915_FORMAT_MOD_Y_TILED:
		return PLANE_CTL_TILED_Y;
	case I915_FORMAT_MOD_Y_TILED_CCS:
		return PLANE_CTL_TILED_Y | PLANE_CTL_RENDER_DECOMPRESSION_ENABLE;
	case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS:
		return PLANE_CTL_TILED_Y |
		       PLANE_CTL_RENDER_DECOMPRESSION_ENABLE |
		       PLANE_CTL_CLEAR_COLOR_DISABLE;
	case I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS:
		return PLANE_CTL_TILED_Y | PLANE_CTL_MEDIA_DECOMPRESSION_ENABLE;
	case I915_FORMAT_MOD_Yf_TILED:
		return PLANE_CTL_TILED_YF;
	case I915_FORMAT_MOD_Yf_TILED_CCS:
		return PLANE_CTL_TILED_YF | PLANE_CTL_RENDER_DECOMPRESSION_ENABLE;
	default:
		MISSING_CASE(fb_modifier);
	}

	return 0;
}

static u32 skl_plane_ctl_rotate(unsigned int rotate)
{
	switch (rotate) {
	case DRM_MODE_ROTATE_0:
		break;
	/*
	 * DRM_MODE_ROTATE_ is counter clockwise to stay compatible with Xrandr
	 * while i915 HW rotation is clockwise, thats why this swapping.
	 */
	case DRM_MODE_ROTATE_90:
		return PLANE_CTL_ROTATE_270;
	case DRM_MODE_ROTATE_180:
		return PLANE_CTL_ROTATE_180;
	case DRM_MODE_ROTATE_270:
		return PLANE_CTL_ROTATE_90;
	default:
		MISSING_CASE(rotate);
	}

	return 0;
}

static u32 cnl_plane_ctl_flip(unsigned int reflect)
{
	switch (reflect) {
	case 0:
		break;
	case DRM_MODE_REFLECT_X:
		return PLANE_CTL_FLIP_HORIZONTAL;
	case DRM_MODE_REFLECT_Y:
	default:
		MISSING_CASE(reflect);
	}

	return 0;
}

u32 skl_plane_ctl_crtc(const struct intel_crtc_state *crtc_state)
{
	struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);
	u32 plane_ctl = 0;

	if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
		return plane_ctl;

	if (crtc_state->gamma_enable)
		plane_ctl |= PLANE_CTL_PIPE_GAMMA_ENABLE;

	if (crtc_state->csc_enable)
		plane_ctl |= PLANE_CTL_PIPE_CSC_ENABLE;

	return plane_ctl;
}

u32 skl_plane_ctl(const struct intel_crtc_state *crtc_state,
		  const struct intel_plane_state *plane_state)
{
	struct drm_i915_private *dev_priv =
		to_i915(plane_state->uapi.plane->dev);
	const struct drm_framebuffer *fb = plane_state->hw.fb;
	unsigned int rotation = plane_state->hw.rotation;
	const struct drm_intel_sprite_colorkey *key = &plane_state->ckey;
	u32 plane_ctl;

	plane_ctl = PLANE_CTL_ENABLE;

	if (INTEL_GEN(dev_priv) < 10 && !IS_GEMINILAKE(dev_priv)) {
		plane_ctl |= skl_plane_ctl_alpha(plane_state);
		plane_ctl |= PLANE_CTL_PLANE_GAMMA_DISABLE;

		if (plane_state->hw.color_encoding == DRM_COLOR_YCBCR_BT709)
			plane_ctl |= PLANE_CTL_YUV_TO_RGB_CSC_FORMAT_BT709;

		if (plane_state->hw.color_range == DRM_COLOR_YCBCR_FULL_RANGE)
			plane_ctl |= PLANE_CTL_YUV_RANGE_CORRECTION_DISABLE;
	}

	plane_ctl |= skl_plane_ctl_format(fb->format->format);
	plane_ctl |= skl_plane_ctl_tiling(fb->modifier);
	plane_ctl |= skl_plane_ctl_rotate(rotation & DRM_MODE_ROTATE_MASK);

	if (INTEL_GEN(dev_priv) >= 10)
		plane_ctl |= cnl_plane_ctl_flip(rotation &
						DRM_MODE_REFLECT_MASK);

	if (key->flags & I915_SET_COLORKEY_DESTINATION)
		plane_ctl |= PLANE_CTL_KEY_ENABLE_DESTINATION;
	else if (key->flags & I915_SET_COLORKEY_SOURCE)
		plane_ctl |= PLANE_CTL_KEY_ENABLE_SOURCE;

	return plane_ctl;
}

u32 glk_plane_color_ctl_crtc(const struct intel_crtc_state *crtc_state)
{
	struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);
	u32 plane_color_ctl = 0;

	if (INTEL_GEN(dev_priv) >= 11)
		return plane_color_ctl;

	if (crtc_state->gamma_enable)
		plane_color_ctl |= PLANE_COLOR_PIPE_GAMMA_ENABLE;

	if (crtc_state->csc_enable)
		plane_color_ctl |= PLANE_COLOR_PIPE_CSC_ENABLE;

	return plane_color_ctl;
}

u32 glk_plane_color_ctl(const struct intel_crtc_state *crtc_state,
			const struct intel_plane_state *plane_state)
{
	struct drm_i915_private *dev_priv =
		to_i915(plane_state->uapi.plane->dev);
	const struct drm_framebuffer *fb = plane_state->hw.fb;
	struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane);
	u32 plane_color_ctl = 0;

	plane_color_ctl |= PLANE_COLOR_PLANE_GAMMA_DISABLE;
	plane_color_ctl |= glk_plane_color_ctl_alpha(plane_state);

	if (fb->format->is_yuv && !icl_is_hdr_plane(dev_priv, plane->id)) {
		switch (plane_state->hw.color_encoding) {
		case DRM_COLOR_YCBCR_BT709:
			plane_color_ctl |= PLANE_COLOR_CSC_MODE_YUV709_TO_RGB709;
			break;
		case DRM_COLOR_YCBCR_BT2020:
			plane_color_ctl |=
				PLANE_COLOR_CSC_MODE_YUV2020_TO_RGB2020;
			break;
		default:
			plane_color_ctl |=
				PLANE_COLOR_CSC_MODE_YUV601_TO_RGB601;
		}
		if (plane_state->hw.color_range == DRM_COLOR_YCBCR_FULL_RANGE)
			plane_color_ctl |= PLANE_COLOR_YUV_RANGE_CORRECTION_DISABLE;
	} else if (fb->format->is_yuv) {
		plane_color_ctl |= PLANE_COLOR_INPUT_CSC_ENABLE;
	}

	return plane_color_ctl;
}

static int
__intel_display_resume(struct drm_device *dev,
		       struct drm_atomic_state *state,
		       struct drm_modeset_acquire_ctx *ctx)
{
	struct drm_crtc_state *crtc_state;
	struct drm_crtc *crtc;
	int i, ret;

	intel_modeset_setup_hw_state(dev, ctx);
	intel_vga_redisable(to_i915(dev));

	if (!state)
		return 0;

	/*
	 * We've duplicated the state, pointers to the old state are invalid.
	 *
	 * Don't attempt to use the old state until we commit the duplicated state.
	 */
	for_each_new_crtc_in_state(state, crtc, crtc_state, i) {
		/*
		 * Force recalculation even if we restore
		 * current state. With fast modeset this may not result
		 * in a modeset when the state is compatible.
		 */
		crtc_state->mode_changed = true;
	}

	/* ignore any reset values/BIOS leftovers in the WM registers */
	if (!HAS_GMCH(to_i915(dev)))
		to_intel_atomic_state(state)->skip_intermediate_wm = true;

	ret = drm_atomic_helper_commit_duplicated_state(state, ctx);

	drm_WARN_ON(dev, ret == -EDEADLK);
	return ret;
}

static bool gpu_reset_clobbers_display(struct drm_i915_private *dev_priv)
{
	return (INTEL_INFO(dev_priv)->gpu_reset_clobbers_display &&
		intel_has_gpu_reset(&dev_priv->gt));
}

void intel_prepare_reset(struct drm_i915_private *dev_priv)
{
	struct drm_device *dev = &dev_priv->drm;
	struct drm_modeset_acquire_ctx *ctx = &dev_priv->reset_ctx;
	struct drm_atomic_state *state;
	int ret;

	/* reset doesn't touch the display */
	if (!dev_priv->params.force_reset_modeset_test &&
	    !gpu_reset_clobbers_display(dev_priv))
		return;

	/* We have a modeset vs reset deadlock, defensively unbreak it. */
	set_bit(I915_RESET_MODESET, &dev_priv->gt.reset.flags);
	smp_mb__after_atomic();
	wake_up_bit(&dev_priv->gt.reset.flags, I915_RESET_MODESET);

	if (atomic_read(&dev_priv->gpu_error.pending_fb_pin)) {
		drm_dbg_kms(&dev_priv->drm,
			    "Modeset potentially stuck, unbreaking through wedging\n");
		intel_gt_set_wedged(&dev_priv->gt);
	}

	/*
	 * Need mode_config.mutex so that we don't
	 * trample ongoing ->detect() and whatnot.
	 */
	mutex_lock(&dev->mode_config.mutex);
	drm_modeset_acquire_init(ctx, 0);
	while (1) {
		ret = drm_modeset_lock_all_ctx(dev, ctx);
		if (ret != -EDEADLK)
			break;

		drm_modeset_backoff(ctx);
	}
	/*
	 * Disabling the crtcs gracefully seems nicer. Also the
	 * g33 docs say we should at least disable all the planes.
	 */
	state = drm_atomic_helper_duplicate_state(dev, ctx);
	if (IS_ERR(state)) {
		ret = PTR_ERR(state);
		drm_err(&dev_priv->drm, "Duplicating state failed with %i\n",
			ret);
		return;
	}

	ret = drm_atomic_helper_disable_all(dev, ctx);
	if (ret) {
		drm_err(&dev_priv->drm, "Suspending crtc's failed with %i\n",
			ret);
		drm_atomic_state_put(state);
		return;
	}

	dev_priv->modeset_restore_state = state;
	state->acquire_ctx = ctx;
}

void intel_finish_reset(struct drm_i915_private *dev_priv)
{
	struct drm_device *dev = &dev_priv->drm;
	struct drm_modeset_acquire_ctx *ctx = &dev_priv->reset_ctx;
	struct drm_atomic_state *state;
	int ret;

	/* reset doesn't touch the display */
	if (!test_bit(I915_RESET_MODESET, &dev_priv->gt.reset.flags))
		return;

	state = fetch_and_zero(&dev_priv->modeset_restore_state);
	if (!state)
		goto unlock;

	/* reset doesn't touch the display */
	if (!gpu_reset_clobbers_display(dev_priv)) {
		/* for testing only restore the display */
		ret = __intel_display_resume(dev, state, ctx);
		if (ret)
			drm_err(&dev_priv->drm,
				"Restoring old state failed with %i\n", ret);
	} else {
		/*
		 * The display has been reset as well,
		 * so need a full re-initialization.
		 */
		intel_pps_unlock_regs_wa(dev_priv);
		intel_modeset_init_hw(dev_priv);
		intel_init_clock_gating(dev_priv);

		spin_lock_irq(&dev_priv->irq_lock);
		if (dev_priv->display.hpd_irq_setup)
			dev_priv->display.hpd_irq_setup(dev_priv);
		spin_unlock_irq(&dev_priv->irq_lock);

		ret = __intel_display_resume(dev, state, ctx);
		if (ret)
			drm_err(&dev_priv->drm,
				"Restoring old state failed with %i\n", ret);

		intel_hpd_init(dev_priv);
	}

	drm_atomic_state_put(state);
unlock:
	drm_modeset_drop_locks(ctx);
	drm_modeset_acquire_fini(ctx);
	mutex_unlock(&dev->mode_config.mutex);

	clear_bit_unlock(I915_RESET_MODESET, &dev_priv->gt.reset.flags);
}

static void icl_set_pipe_chicken(struct intel_crtc *crtc)
{
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	enum pipe pipe = crtc->pipe;
	u32 tmp;

	tmp = intel_de_read(dev_priv, PIPE_CHICKEN(pipe));

	/*
	 * Display WA #1153: icl
	 * enable hardware to bypass the alpha math
	 * and rounding for per-pixel values 00 and 0xff
	 */
	tmp |= PER_PIXEL_ALPHA_BYPASS_EN;
	/*
	 * Display WA # 1605353570: icl
	 * Set the pixel rounding bit to 1 for allowing
	 * passthrough of Frame buffer pixels unmodified
	 * across pipe
	 */
	tmp |= PIXEL_ROUNDING_TRUNC_FB_PASSTHRU;
	intel_de_write(dev_priv, PIPE_CHICKEN(pipe), tmp);
}

static void intel_fdi_normal_train(struct intel_crtc *crtc)
{
	struct drm_device *dev = crtc->base.dev;
	struct drm_i915_private *dev_priv = to_i915(dev);
	enum pipe pipe = crtc->pipe;
	i915_reg_t reg;
	u32 temp;

	/* enable normal train */
	reg = FDI_TX_CTL(pipe);
	temp = intel_de_read(dev_priv, reg);
	if (IS_IVYBRIDGE(dev_priv)) {
		temp &= ~FDI_LINK_TRAIN_NONE_IVB;
		temp |= FDI_LINK_TRAIN_NONE_IVB | FDI_TX_ENHANCE_FRAME_ENABLE;
	} else {
		temp &= ~FDI_LINK_TRAIN_NONE;
		temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
	}
	intel_de_write(dev_priv, reg, temp);

	reg = FDI_RX_CTL(pipe);
	temp = intel_de_read(dev_priv, reg);
	if (HAS_PCH_CPT(dev_priv)) {
		temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
		temp |= FDI_LINK_TRAIN_NORMAL_CPT;
	} else {
		temp &= ~FDI_LINK_TRAIN_NONE;
		temp |= FDI_LINK_TRAIN_NONE;
	}
	intel_de_write(dev_priv, reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);

	/* wait one idle pattern time */
	intel_de_posting_read(dev_priv, reg);
	udelay(1000);

	/* IVB wants error correction enabled */
	if (IS_IVYBRIDGE(dev_priv))
		intel_de_write(dev_priv, reg,
		               intel_de_read(dev_priv, reg) | FDI_FS_ERRC_ENABLE | FDI_FE_ERRC_ENABLE);
}

/* The FDI link training functions for ILK/Ibexpeak. */
static void ilk_fdi_link_train(struct intel_crtc *crtc,
			       const struct intel_crtc_state *crtc_state)
{
	struct drm_device *dev = crtc->base.dev;
	struct drm_i915_private *dev_priv = to_i915(dev);
	enum pipe pipe = crtc->pipe;
	i915_reg_t reg;
	u32 temp, tries;

	/* FDI needs bits from pipe first */
	assert_pipe_enabled(dev_priv, crtc_state->cpu_transcoder);

	/* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
	   for train result */
	reg = FDI_RX_IMR(pipe);
	temp = intel_de_read(dev_priv, reg);
	temp &= ~FDI_RX_SYMBOL_LOCK;
	temp &= ~FDI_RX_BIT_LOCK;
	intel_de_write(dev_priv, reg, temp);
	intel_de_read(dev_priv, reg);
	udelay(150);

	/* enable CPU FDI TX and PCH FDI RX */
	reg = FDI_TX_CTL(pipe);
	temp = intel_de_read(dev_priv, reg);
	temp &= ~FDI_DP_PORT_WIDTH_MASK;
	temp |= FDI_DP_PORT_WIDTH(crtc_state->fdi_lanes);
	temp &= ~FDI_LINK_TRAIN_NONE;
	temp |= FDI_LINK_TRAIN_PATTERN_1;
	intel_de_write(dev_priv, reg, temp | FDI_TX_ENABLE);

	reg = FDI_RX_CTL(pipe);
	temp = intel_de_read(dev_priv, reg);
	temp &= ~FDI_LINK_TRAIN_NONE;
	temp |= FDI_LINK_TRAIN_PATTERN_1;
	intel_de_write(dev_priv, reg, temp | FDI_RX_ENABLE);

	intel_de_posting_read(dev_priv, reg);
	udelay(150);

	/* Ironlake workaround, enable clock pointer after FDI enable*/
	intel_de_write(dev_priv, FDI_RX_CHICKEN(pipe),
		       FDI_RX_PHASE_SYNC_POINTER_OVR);
	intel_de_write(dev_priv, FDI_RX_CHICKEN(pipe),
		       FDI_RX_PHASE_SYNC_POINTER_OVR | FDI_RX_PHASE_SYNC_POINTER_EN);

	reg = FDI_RX_IIR(pipe);
	for (tries = 0; tries < 5; tries++) {
		temp = intel_de_read(dev_priv, reg);
		drm_dbg_kms(&dev_priv->drm, "FDI_RX_IIR 0x%x\n", temp);

		if ((temp & FDI_RX_BIT_LOCK)) {
			drm_dbg_kms(&dev_priv->drm, "FDI train 1 done.\n");
			intel_de_write(dev_priv, reg, temp | FDI_RX_BIT_LOCK);
			break;
		}
	}
	if (tries == 5)
		drm_err(&dev_priv->drm, "FDI train 1 fail!\n");

	/* Train 2 */
	reg = FDI_TX_CTL(pipe);
	temp = intel_de_read(dev_priv, reg);
	temp &= ~FDI_LINK_TRAIN_NONE;
	temp |= FDI_LINK_TRAIN_PATTERN_2;
	intel_de_write(dev_priv, reg, temp);

	reg = FDI_RX_CTL(pipe);
	temp = intel_de_read(dev_priv, reg);
	temp &= ~FDI_LINK_TRAIN_NONE;
	temp |= FDI_LINK_TRAIN_PATTERN_2;
	intel_de_write(dev_priv, reg, temp);

	intel_de_posting_read(dev_priv, reg);
	udelay(150);

	reg = FDI_RX_IIR(pipe);
	for (tries = 0; tries < 5; tries++) {
		temp = intel_de_read(dev_priv, reg);
		drm_dbg_kms(&dev_priv->drm, "FDI_RX_IIR 0x%x\n", temp);

		if (temp & FDI_RX_SYMBOL_LOCK) {
			intel_de_write(dev_priv, reg,
				       temp | FDI_RX_SYMBOL_LOCK);
			drm_dbg_kms(&dev_priv->drm, "FDI train 2 done.\n");
			break;
		}
	}
	if (tries == 5)
		drm_err(&dev_priv->drm, "FDI train 2 fail!\n");

	drm_dbg_kms(&dev_priv->drm, "FDI train done\n");

}

static const int snb_b_fdi_train_param[] = {
	FDI_LINK_TRAIN_400MV_0DB_SNB_B,
	FDI_LINK_TRAIN_400MV_6DB_SNB_B,
	FDI_LINK_TRAIN_600MV_3_5DB_SNB_B,
	FDI_LINK_TRAIN_800MV_0DB_SNB_B,
};

/* The FDI link training functions for SNB/Cougarpoint. */
static void gen6_fdi_link_train(struct intel_crtc *crtc,
				const struct intel_crtc_state *crtc_state)
{
	struct drm_device *dev = crtc->base.dev;
	struct drm_i915_private *dev_priv = to_i915(dev);
	enum pipe pipe = crtc->pipe;
	i915_reg_t reg;
	u32 temp, i, retry;

	/* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
	   for train result */
	reg = FDI_RX_IMR(pipe);
	temp = intel_de_read(dev_priv, reg);
	temp &= ~FDI_RX_SYMBOL_LOCK;
	temp &= ~FDI_RX_BIT_LOCK;
	intel_de_write(dev_priv, reg, temp);

	intel_de_posting_read(dev_priv, reg);
	udelay(150);

	/* enable CPU FDI TX and PCH FDI RX */
	reg = FDI_TX_CTL(pipe);
	temp = intel_de_read(dev_priv, reg);
	temp &= ~FDI_DP_PORT_WIDTH_MASK;
	temp |= FDI_DP_PORT_WIDTH(crtc_state->fdi_lanes);
	temp &= ~FDI_LINK_TRAIN_NONE;
	temp |= FDI_LINK_TRAIN_PATTERN_1;
	temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
	/* SNB-B */
	temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
	intel_de_write(dev_priv, reg, temp | FDI_TX_ENABLE);

	intel_de_write(dev_priv, FDI_RX_MISC(pipe),
		       FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);

	reg = FDI_RX_CTL(pipe);
	temp = intel_de_read(dev_priv, reg);
	if (HAS_PCH_CPT(dev_priv)) {
		temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
		temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
	} else {
		temp &= ~FDI_LINK_TRAIN_NONE;
		temp |= FDI_LINK_TRAIN_PATTERN_1;
	}
	intel_de_write(dev_priv, reg, temp | FDI_RX_ENABLE);

	intel_de_posting_read(dev_priv, reg);
	udelay(150);

	for (i = 0; i < 4; i++) {
		reg = FDI_TX_CTL(pipe);
		temp = intel_de_read(dev_priv, reg);
		temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
		temp |= snb_b_fdi_train_param[i];
		intel_de_write(dev_priv, reg, temp);

		intel_de_posting_read(dev_priv, reg);
		udelay(500);

		for (retry = 0; retry < 5; retry++) {
			reg = FDI_RX_IIR(pipe);
			temp = intel_de_read(dev_priv, reg);
			drm_dbg_kms(&dev_priv->drm, "FDI_RX_IIR 0x%x\n", temp);
			if (temp & FDI_RX_BIT_LOCK) {
				intel_de_write(dev_priv, reg,
					       temp | FDI_RX_BIT_LOCK);
				drm_dbg_kms(&dev_priv->drm,
					    "FDI train 1 done.\n");
				break;
			}
			udelay(50);
		}
		if (retry < 5)
			break;
	}
	if (i == 4)
		drm_err(&dev_priv->drm, "FDI train 1 fail!\n");

	/* Train 2 */
	reg = FDI_TX_CTL(pipe);
	temp = intel_de_read(dev_priv, reg);
	temp &= ~FDI_LINK_TRAIN_NONE;
	temp |= FDI_LINK_TRAIN_PATTERN_2;
	if (IS_GEN(dev_priv, 6)) {
		temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
		/* SNB-B */
		temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
	}
	intel_de_write(dev_priv, reg, temp);

	reg = FDI_RX_CTL(pipe);
	temp = intel_de_read(dev_priv, reg);
	if (HAS_PCH_CPT(dev_priv)) {
		temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
		temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
	} else {
		temp &= ~FDI_LINK_TRAIN_NONE;
		temp |= FDI_LINK_TRAIN_PATTERN_2;
	}
	intel_de_write(dev_priv, reg, temp);

	intel_de_posting_read(dev_priv, reg);
	udelay(150);

	for (i = 0; i < 4; i++) {
		reg = FDI_TX_CTL(pipe);
		temp = intel_de_read(dev_priv, reg);
		temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
		temp |= snb_b_fdi_train_param[i];
		intel_de_write(dev_priv, reg, temp);

		intel_de_posting_read(dev_priv, reg);
		udelay(500);

		for (retry = 0; retry < 5; retry++) {
			reg = FDI_RX_IIR(pipe);
			temp = intel_de_read(dev_priv, reg);
			drm_dbg_kms(&dev_priv->drm, "FDI_RX_IIR 0x%x\n", temp);
			if (temp & FDI_RX_SYMBOL_LOCK) {
				intel_de_write(dev_priv, reg,
					       temp | FDI_RX_SYMBOL_LOCK);
				drm_dbg_kms(&dev_priv->drm,
					    "FDI train 2 done.\n");
				break;
			}
			udelay(50);
		}
		if (retry < 5)
			break;
	}
	if (i == 4)
		drm_err(&dev_priv->drm, "FDI train 2 fail!\n");

	drm_dbg_kms(&dev_priv->drm, "FDI train done.\n");
}

/* Manual link training for Ivy Bridge A0 parts */
static void ivb_manual_fdi_link_train(struct intel_crtc *crtc,
				      const struct intel_crtc_state *crtc_state)
{
	struct drm_device *dev = crtc->base.dev;
	struct drm_i915_private *dev_priv = to_i915(dev);
	enum pipe pipe = crtc->pipe;
	i915_reg_t reg;
	u32 temp, i, j;

	/* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
	   for train result */
	reg = FDI_RX_IMR(pipe);
	temp = intel_de_read(dev_priv, reg);
	temp &= ~FDI_RX_SYMBOL_LOCK;
	temp &= ~FDI_RX_BIT_LOCK;
	intel_de_write(dev_priv, reg, temp);

	intel_de_posting_read(dev_priv, reg);
	udelay(150);

	drm_dbg_kms(&dev_priv->drm, "FDI_RX_IIR before link train 0x%x\n",
		    intel_de_read(dev_priv, FDI_RX_IIR(pipe)));

	/* Try each vswing and preemphasis setting twice before moving on */
	for (j = 0; j < ARRAY_SIZE(snb_b_fdi_train_param) * 2; j++) {
		/* disable first in case we need to retry */
		reg = FDI_TX_CTL(pipe);
		temp = intel_de_read(dev_priv, reg);
		temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB);
		temp &= ~FDI_TX_ENABLE;
		intel_de_write(dev_priv, reg, temp);

		reg = FDI_RX_CTL(pipe);
		temp = intel_de_read(dev_priv, reg);
		temp &= ~FDI_LINK_TRAIN_AUTO;
		temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
		temp &= ~FDI_RX_ENABLE;
		intel_de_write(dev_priv, reg, temp);

		/* enable CPU FDI TX and PCH FDI RX */
		reg = FDI_TX_CTL(pipe);
		temp = intel_de_read(dev_priv, reg);
		temp &= ~FDI_DP_PORT_WIDTH_MASK;
		temp |= FDI_DP_PORT_WIDTH(crtc_state->fdi_lanes);
		temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
		temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
		temp |= snb_b_fdi_train_param[j/2];
		temp |= FDI_COMPOSITE_SYNC;
		intel_de_write(dev_priv, reg, temp | FDI_TX_ENABLE);

		intel_de_write(dev_priv, FDI_RX_MISC(pipe),
			       FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);

		reg = FDI_RX_CTL(pipe);
		temp = intel_de_read(dev_priv, reg);
		temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
		temp |= FDI_COMPOSITE_SYNC;
		intel_de_write(dev_priv, reg, temp | FDI_RX_ENABLE);

		intel_de_posting_read(dev_priv, reg);
		udelay(1); /* should be 0.5us */

		for (i = 0; i < 4; i++) {
			reg = FDI_RX_IIR(pipe);
			temp = intel_de_read(dev_priv, reg);
			drm_dbg_kms(&dev_priv->drm, "FDI_RX_IIR 0x%x\n", temp);

			if (temp & FDI_RX_BIT_LOCK ||
			    (intel_de_read(dev_priv, reg) & FDI_RX_BIT_LOCK)) {
				intel_de_write(dev_priv, reg,
					       temp | FDI_RX_BIT_LOCK);
				drm_dbg_kms(&dev_priv->drm,
					    "FDI train 1 done, level %i.\n",
					    i);
				break;
			}
			udelay(1); /* should be 0.5us */
		}
		if (i == 4) {
			drm_dbg_kms(&dev_priv->drm,
				    "FDI train 1 fail on vswing %d\n", j / 2);
			continue;
		}

		/* Train 2 */
		reg = FDI_TX_CTL(pipe);
		temp = intel_de_read(dev_priv, reg);
		temp &= ~FDI_LINK_TRAIN_NONE_IVB;
		temp |= FDI_LINK_TRAIN_PATTERN_2_IVB;
		intel_de_write(dev_priv, reg, temp);

		reg = FDI_RX_CTL(pipe);
		temp = intel_de_read(dev_priv, reg);
		temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
		temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
		intel_de_write(dev_priv, reg, temp);

		intel_de_posting_read(dev_priv, reg);
		udelay(2); /* should be 1.5us */

		for (i = 0; i < 4; i++) {
			reg = FDI_RX_IIR(pipe);
			temp = intel_de_read(dev_priv, reg);
			drm_dbg_kms(&dev_priv->drm, "FDI_RX_IIR 0x%x\n", temp);

			if (temp & FDI_RX_SYMBOL_LOCK ||
			    (intel_de_read(dev_priv, reg) & FDI_RX_SYMBOL_LOCK)) {
				intel_de_write(dev_priv, reg,
					       temp | FDI_RX_SYMBOL_LOCK);
				drm_dbg_kms(&dev_priv->drm,
					    "FDI train 2 done, level %i.\n",
					    i);
				goto train_done;
			}
			udelay(2); /* should be 1.5us */
		}
		if (i == 4)
			drm_dbg_kms(&dev_priv->drm,
				    "FDI train 2 fail on vswing %d\n", j / 2);
	}

train_done:
	drm_dbg_kms(&dev_priv->drm, "FDI train done.\n");
}

static void ilk_fdi_pll_enable(const struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev);
	enum pipe pipe = intel_crtc->pipe;
	i915_reg_t reg;
	u32 temp;

	/* enable PCH FDI RX PLL, wait warmup plus DMI latency */
	reg = FDI_RX_CTL(pipe);
	temp = intel_de_read(dev_priv, reg);
	temp &= ~(FDI_DP_PORT_WIDTH_MASK | (0x7 << 16));
	temp |= FDI_DP_PORT_WIDTH(crtc_state->fdi_lanes);
	temp |= (intel_de_read(dev_priv, PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
	intel_de_write(dev_priv, reg, temp | FDI_RX_PLL_ENABLE);

	intel_de_posting_read(dev_priv, reg);
	udelay(200);

	/* Switch from Rawclk to PCDclk */
	temp = intel_de_read(dev_priv, reg);
	intel_de_write(dev_priv, reg, temp | FDI_PCDCLK);

	intel_de_posting_read(dev_priv, reg);
	udelay(200);

	/* Enable CPU FDI TX PLL, always on for Ironlake */
	reg = FDI_TX_CTL(pipe);
	temp = intel_de_read(dev_priv, reg);
	if ((temp & FDI_TX_PLL_ENABLE) == 0) {
		intel_de_write(dev_priv, reg, temp | FDI_TX_PLL_ENABLE);

		intel_de_posting_read(dev_priv, reg);
		udelay(100);
	}
}

static void ilk_fdi_pll_disable(struct intel_crtc *intel_crtc)
{
	struct drm_device *dev = intel_crtc->base.dev;
	struct drm_i915_private *dev_priv = to_i915(dev);
	enum pipe pipe = intel_crtc->pipe;
	i915_reg_t reg;
	u32 temp;

	/* Switch from PCDclk to Rawclk */
	reg = FDI_RX_CTL(pipe);
	temp = intel_de_read(dev_priv, reg);
	intel_de_write(dev_priv, reg, temp & ~FDI_PCDCLK);

	/* Disable CPU FDI TX PLL */
	reg = FDI_TX_CTL(pipe);
	temp = intel_de_read(dev_priv, reg);
	intel_de_write(dev_priv, reg, temp & ~FDI_TX_PLL_ENABLE);

	intel_de_posting_read(dev_priv, reg);
	udelay(100);

	reg = FDI_RX_CTL(pipe);
	temp = intel_de_read(dev_priv, reg);
	intel_de_write(dev_priv, reg, temp & ~FDI_RX_PLL_ENABLE);

	/* Wait for the clocks to turn off. */
	intel_de_posting_read(dev_priv, reg);
	udelay(100);
}

static void ilk_fdi_disable(struct intel_crtc *crtc)
{
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	enum pipe pipe = crtc->pipe;
	i915_reg_t reg;
	u32 temp;

	/* disable CPU FDI tx and PCH FDI rx */
	reg = FDI_TX_CTL(pipe);
	temp = intel_de_read(dev_priv, reg);
	intel_de_write(dev_priv, reg, temp & ~FDI_TX_ENABLE);
	intel_de_posting_read(dev_priv, reg);

	reg = FDI_RX_CTL(pipe);
	temp = intel_de_read(dev_priv, reg);
	temp &= ~(0x7 << 16);
	temp |= (intel_de_read(dev_priv, PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
	intel_de_write(dev_priv, reg, temp & ~FDI_RX_ENABLE);

	intel_de_posting_read(dev_priv, reg);
	udelay(100);

	/* Ironlake workaround, disable clock pointer after downing FDI */
	if (HAS_PCH_IBX(dev_priv))
		intel_de_write(dev_priv, FDI_RX_CHICKEN(pipe),
			       FDI_RX_PHASE_SYNC_POINTER_OVR);

	/* still set train pattern 1 */
	reg = FDI_TX_CTL(pipe);
	temp = intel_de_read(dev_priv, reg);
	temp &= ~FDI_LINK_TRAIN_NONE;
	temp |= FDI_LINK_TRAIN_PATTERN_1;
	intel_de_write(dev_priv, reg, temp);

	reg = FDI_RX_CTL(pipe);
	temp = intel_de_read(dev_priv, reg);
	if (HAS_PCH_CPT(dev_priv)) {
		temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
		temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
	} else {
		temp &= ~FDI_LINK_TRAIN_NONE;
		temp |= FDI_LINK_TRAIN_PATTERN_1;
	}
	/* BPC in FDI rx is consistent with that in PIPECONF */
	temp &= ~(0x07 << 16);
	temp |= (intel_de_read(dev_priv, PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
	intel_de_write(dev_priv, reg, temp);

	intel_de_posting_read(dev_priv, reg);
	udelay(100);
}

bool intel_has_pending_fb_unpin(struct drm_i915_private *dev_priv)
{
	struct drm_crtc *crtc;
	bool cleanup_done;

	drm_for_each_crtc(crtc, &dev_priv->drm) {
		struct drm_crtc_commit *commit;
		spin_lock(&crtc->commit_lock);
		commit = list_first_entry_or_null(&crtc->commit_list,
						  struct drm_crtc_commit, commit_entry);
		cleanup_done = commit ?
			try_wait_for_completion(&commit->cleanup_done) : true;
		spin_unlock(&crtc->commit_lock);

		if (cleanup_done)
			continue;

		drm_crtc_wait_one_vblank(crtc);

		return true;
	}

	return false;
}

void lpt_disable_iclkip(struct drm_i915_private *dev_priv)
{
	u32 temp;

	intel_de_write(dev_priv, PIXCLK_GATE, PIXCLK_GATE_GATE);

	mutex_lock(&dev_priv->sb_lock);

	temp = intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK);
	temp |= SBI_SSCCTL_DISABLE;
	intel_sbi_write(dev_priv, SBI_SSCCTL6, temp, SBI_ICLK);

	mutex_unlock(&dev_priv->sb_lock);
}

/* Program iCLKIP clock to the desired frequency */
static void lpt_program_iclkip(const struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	int clock = crtc_state->hw.adjusted_mode.crtc_clock;
	u32 divsel, phaseinc, auxdiv, phasedir = 0;
	u32 temp;

	lpt_disable_iclkip(dev_priv);

	/* The iCLK virtual clock root frequency is in MHz,
	 * but the adjusted_mode->crtc_clock in in KHz. To get the
	 * divisors, it is necessary to divide one by another, so we
	 * convert the virtual clock precision to KHz here for higher
	 * precision.
	 */
	for (auxdiv = 0; auxdiv < 2; auxdiv++) {
		u32 iclk_virtual_root_freq = 172800 * 1000;
		u32 iclk_pi_range = 64;
		u32 desired_divisor;

		desired_divisor = DIV_ROUND_CLOSEST(iclk_virtual_root_freq,
						    clock << auxdiv);
		divsel = (desired_divisor / iclk_pi_range) - 2;
		phaseinc = desired_divisor % iclk_pi_range;

		/*
		 * Near 20MHz is a corner case which is
		 * out of range for the 7-bit divisor
		 */
		if (divsel <= 0x7f)
			break;
	}

	/* This should not happen with any sane values */
	drm_WARN_ON(&dev_priv->drm, SBI_SSCDIVINTPHASE_DIVSEL(divsel) &
		    ~SBI_SSCDIVINTPHASE_DIVSEL_MASK);
	drm_WARN_ON(&dev_priv->drm, SBI_SSCDIVINTPHASE_DIR(phasedir) &
		    ~SBI_SSCDIVINTPHASE_INCVAL_MASK);

	drm_dbg_kms(&dev_priv->drm,
		    "iCLKIP clock: found settings for %dKHz refresh rate: auxdiv=%x, divsel=%x, phasedir=%x, phaseinc=%x\n",
		    clock, auxdiv, divsel, phasedir, phaseinc);

	mutex_lock(&dev_priv->sb_lock);

	/* Program SSCDIVINTPHASE6 */
	temp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE6, SBI_ICLK);
	temp &= ~SBI_SSCDIVINTPHASE_DIVSEL_MASK;
	temp |= SBI_SSCDIVINTPHASE_DIVSEL(divsel);
	temp &= ~SBI_SSCDIVINTPHASE_INCVAL_MASK;
	temp |= SBI_SSCDIVINTPHASE_INCVAL(phaseinc);
	temp |= SBI_SSCDIVINTPHASE_DIR(phasedir);
	temp |= SBI_SSCDIVINTPHASE_PROPAGATE;
	intel_sbi_write(dev_priv, SBI_SSCDIVINTPHASE6, temp, SBI_ICLK);

	/* Program SSCAUXDIV */
	temp = intel_sbi_read(dev_priv, SBI_SSCAUXDIV6, SBI_ICLK);
	temp &= ~SBI_SSCAUXDIV_FINALDIV2SEL(1);
	temp |= SBI_SSCAUXDIV_FINALDIV2SEL(auxdiv);
	intel_sbi_write(dev_priv, SBI_SSCAUXDIV6, temp, SBI_ICLK);

	/* Enable modulator and associated divider */
	temp = intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK);
	temp &= ~SBI_SSCCTL_DISABLE;
	intel_sbi_write(dev_priv, SBI_SSCCTL6, temp, SBI_ICLK);

	mutex_unlock(&dev_priv->sb_lock);

	/* Wait for initialization time */
	udelay(24);

	intel_de_write(dev_priv, PIXCLK_GATE, PIXCLK_GATE_UNGATE);
}

int lpt_get_iclkip(struct drm_i915_private *dev_priv)
{
	u32 divsel, phaseinc, auxdiv;
	u32 iclk_virtual_root_freq = 172800 * 1000;
	u32 iclk_pi_range = 64;
	u32 desired_divisor;
	u32 temp;

	if ((intel_de_read(dev_priv, PIXCLK_GATE) & PIXCLK_GATE_UNGATE) == 0)
		return 0;

	mutex_lock(&dev_priv->sb_lock);

	temp = intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK);
	if (temp & SBI_SSCCTL_DISABLE) {
		mutex_unlock(&dev_priv->sb_lock);
		return 0;
	}

	temp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE6, SBI_ICLK);
	divsel = (temp & SBI_SSCDIVINTPHASE_DIVSEL_MASK) >>
		SBI_SSCDIVINTPHASE_DIVSEL_SHIFT;
	phaseinc = (temp & SBI_SSCDIVINTPHASE_INCVAL_MASK) >>
		SBI_SSCDIVINTPHASE_INCVAL_SHIFT;

	temp = intel_sbi_read(dev_priv, SBI_SSCAUXDIV6, SBI_ICLK);
	auxdiv = (temp & SBI_SSCAUXDIV_FINALDIV2SEL_MASK) >>
		SBI_SSCAUXDIV_FINALDIV2SEL_SHIFT;

	mutex_unlock(&dev_priv->sb_lock);

	desired_divisor = (divsel + 2) * iclk_pi_range + phaseinc;

	return DIV_ROUND_CLOSEST(iclk_virtual_root_freq,
				 desired_divisor << auxdiv);
}

static void ilk_pch_transcoder_set_timings(const struct intel_crtc_state *crtc_state,
					   enum pipe pch_transcoder)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;

	intel_de_write(dev_priv, PCH_TRANS_HTOTAL(pch_transcoder),
		       intel_de_read(dev_priv, HTOTAL(cpu_transcoder)));
	intel_de_write(dev_priv, PCH_TRANS_HBLANK(pch_transcoder),
		       intel_de_read(dev_priv, HBLANK(cpu_transcoder)));
	intel_de_write(dev_priv, PCH_TRANS_HSYNC(pch_transcoder),
		       intel_de_read(dev_priv, HSYNC(cpu_transcoder)));

	intel_de_write(dev_priv, PCH_TRANS_VTOTAL(pch_transcoder),
		       intel_de_read(dev_priv, VTOTAL(cpu_transcoder)));
	intel_de_write(dev_priv, PCH_TRANS_VBLANK(pch_transcoder),
		       intel_de_read(dev_priv, VBLANK(cpu_transcoder)));
	intel_de_write(dev_priv, PCH_TRANS_VSYNC(pch_transcoder),
		       intel_de_read(dev_priv, VSYNC(cpu_transcoder)));
	intel_de_write(dev_priv, PCH_TRANS_VSYNCSHIFT(pch_transcoder),
		       intel_de_read(dev_priv, VSYNCSHIFT(cpu_transcoder)));
}

static void cpt_set_fdi_bc_bifurcation(struct drm_i915_private *dev_priv, bool enable)
{
	u32 temp;

	temp = intel_de_read(dev_priv, SOUTH_CHICKEN1);
	if (!!(temp & FDI_BC_BIFURCATION_SELECT) == enable)
		return;

	drm_WARN_ON(&dev_priv->drm,
		    intel_de_read(dev_priv, FDI_RX_CTL(PIPE_B)) &
		    FDI_RX_ENABLE);
	drm_WARN_ON(&dev_priv->drm,
		    intel_de_read(dev_priv, FDI_RX_CTL(PIPE_C)) &
		    FDI_RX_ENABLE);

	temp &= ~FDI_BC_BIFURCATION_SELECT;
	if (enable)
		temp |= FDI_BC_BIFURCATION_SELECT;

	drm_dbg_kms(&dev_priv->drm, "%sabling fdi C rx\n",
		    enable ? "en" : "dis");
	intel_de_write(dev_priv, SOUTH_CHICKEN1, temp);
	intel_de_posting_read(dev_priv, SOUTH_CHICKEN1);
}

static void ivb_update_fdi_bc_bifurcation(const struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);

	switch (crtc->pipe) {
	case PIPE_A:
		break;
	case PIPE_B:
		if (crtc_state->fdi_lanes > 2)
			cpt_set_fdi_bc_bifurcation(dev_priv, false);
		else
			cpt_set_fdi_bc_bifurcation(dev_priv, true);

		break;
	case PIPE_C:
		cpt_set_fdi_bc_bifurcation(dev_priv, true);

		break;
	default:
		BUG();
	}
}

/*
 * Finds the encoder associated with the given CRTC. This can only be
 * used when we know that the CRTC isn't feeding multiple encoders!
 */
static struct intel_encoder *
intel_get_crtc_new_encoder(const struct intel_atomic_state *state,
			   const struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	const struct drm_connector_state *connector_state;
	const struct drm_connector *connector;
	struct intel_encoder *encoder = NULL;
	int num_encoders = 0;
	int i;

	for_each_new_connector_in_state(&state->base, connector, connector_state, i) {
		if (connector_state->crtc != &crtc->base)
			continue;

		encoder = to_intel_encoder(connector_state->best_encoder);
		num_encoders++;
	}

	drm_WARN(encoder->base.dev, num_encoders != 1,
		 "%d encoders for pipe %c\n",
		 num_encoders, pipe_name(crtc->pipe));

	return encoder;
}

/*
 * Enable PCH resources required for PCH ports:
 *   - PCH PLLs
 *   - FDI training & RX/TX
 *   - update transcoder timings
 *   - DP transcoding bits
 *   - transcoder
 */
static void ilk_pch_enable(const struct intel_atomic_state *state,
			   const struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_device *dev = crtc->base.dev;
	struct drm_i915_private *dev_priv = to_i915(dev);
	enum pipe pipe = crtc->pipe;
	u32 temp;

	assert_pch_transcoder_disabled(dev_priv, pipe);

	if (IS_IVYBRIDGE(dev_priv))
		ivb_update_fdi_bc_bifurcation(crtc_state);

	/* Write the TU size bits before fdi link training, so that error
	 * detection works. */
	intel_de_write(dev_priv, FDI_RX_TUSIZE1(pipe),
		       intel_de_read(dev_priv, PIPE_DATA_M1(pipe)) & TU_SIZE_MASK);

	/* For PCH output, training FDI link */
	dev_priv->display.fdi_link_train(crtc, crtc_state);

	/* We need to program the right clock selection before writing the pixel
	 * mutliplier into the DPLL. */
	if (HAS_PCH_CPT(dev_priv)) {
		u32 sel;

		temp = intel_de_read(dev_priv, PCH_DPLL_SEL);
		temp |= TRANS_DPLL_ENABLE(pipe);
		sel = TRANS_DPLLB_SEL(pipe);
		if (crtc_state->shared_dpll ==
		    intel_get_shared_dpll_by_id(dev_priv, DPLL_ID_PCH_PLL_B))
			temp |= sel;
		else
			temp &= ~sel;
		intel_de_write(dev_priv, PCH_DPLL_SEL, temp);
	}

	/* XXX: pch pll's can be enabled any time before we enable the PCH
	 * transcoder, and we actually should do this to not upset any PCH
	 * transcoder that already use the clock when we share it.
	 *
	 * Note that enable_shared_dpll tries to do the right thing, but
	 * get_shared_dpll unconditionally resets the pll - we need that to have
	 * the right LVDS enable sequence. */
	intel_enable_shared_dpll(crtc_state);

	/* set transcoder timing, panel must allow it */
	assert_panel_unlocked(dev_priv, pipe);
	ilk_pch_transcoder_set_timings(crtc_state, pipe);

	intel_fdi_normal_train(crtc);

	/* For PCH DP, enable TRANS_DP_CTL */
	if (HAS_PCH_CPT(dev_priv) &&
	    intel_crtc_has_dp_encoder(crtc_state)) {
		const struct drm_display_mode *adjusted_mode =
			&crtc_state->hw.adjusted_mode;
		u32 bpc = (intel_de_read(dev_priv, PIPECONF(pipe)) & PIPECONF_BPC_MASK) >> 5;
		i915_reg_t reg = TRANS_DP_CTL(pipe);
		enum port port;

		temp = intel_de_read(dev_priv, reg);
		temp &= ~(TRANS_DP_PORT_SEL_MASK |
			  TRANS_DP_SYNC_MASK |
			  TRANS_DP_BPC_MASK);
		temp |= TRANS_DP_OUTPUT_ENABLE;
		temp |= bpc << 9; /* same format but at 11:9 */

		if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
			temp |= TRANS_DP_HSYNC_ACTIVE_HIGH;
		if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
			temp |= TRANS_DP_VSYNC_ACTIVE_HIGH;

		port = intel_get_crtc_new_encoder(state, crtc_state)->port;
		drm_WARN_ON(dev, port < PORT_B || port > PORT_D);
		temp |= TRANS_DP_PORT_SEL(port);

		intel_de_write(dev_priv, reg, temp);
	}

	ilk_enable_pch_transcoder(crtc_state);
}

void lpt_pch_enable(const struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;

	assert_pch_transcoder_disabled(dev_priv, PIPE_A);

	lpt_program_iclkip(crtc_state);

	/* Set transcoder timing. */
	ilk_pch_transcoder_set_timings(crtc_state, PIPE_A);

	lpt_enable_pch_transcoder(dev_priv, cpu_transcoder);
}

static void cpt_verify_modeset(struct drm_i915_private *dev_priv,
			       enum pipe pipe)
{
	i915_reg_t dslreg = PIPEDSL(pipe);
	u32 temp;

	temp = intel_de_read(dev_priv, dslreg);
	udelay(500);
	if (wait_for(intel_de_read(dev_priv, dslreg) != temp, 5)) {
		if (wait_for(intel_de_read(dev_priv, dslreg) != temp, 5))
			drm_err(&dev_priv->drm,
				"mode set failed: pipe %c stuck\n",
				pipe_name(pipe));
	}
}

/*
 * The hardware phase 0.0 refers to the center of the pixel.
 * We want to start from the top/left edge which is phase
 * -0.5. That matches how the hardware calculates the scaling
 * factors (from top-left of the first pixel to bottom-right
 * of the last pixel, as opposed to the pixel centers).
 *
 * For 4:2:0 subsampled chroma planes we obviously have to
 * adjust that so that the chroma sample position lands in
 * the right spot.
 *
 * Note that for packed YCbCr 4:2:2 formats there is no way to
 * control chroma siting. The hardware simply replicates the
 * chroma samples for both of the luma samples, and thus we don't
 * actually get the expected MPEG2 chroma siting convention :(
 * The same behaviour is observed on pre-SKL platforms as well.
 *
 * Theory behind the formula (note that we ignore sub-pixel
 * source coordinates):
 * s = source sample position
 * d = destination sample position
 *
 * Downscaling 4:1:
 * -0.5
 * | 0.0
 * | |     1.5 (initial phase)
 * | |     |
 * v v     v
 * | s | s | s | s |
 * |       d       |
 *
 * Upscaling 1:4:
 * -0.5
 * | -0.375 (initial phase)
 * | |     0.0
 * | |     |
 * v v     v
 * |       s       |
 * | d | d | d | d |
 */
u16 skl_scaler_calc_phase(int sub, int scale, bool chroma_cosited)
{
	int phase = -0x8000;
	u16 trip = 0;

	if (chroma_cosited)
		phase += (sub - 1) * 0x8000 / sub;

	phase += scale / (2 * sub);

	/*
	 * Hardware initial phase limited to [-0.5:1.5].
	 * Since the max hardware scale factor is 3.0, we
	 * should never actually excdeed 1.0 here.
	 */
	WARN_ON(phase < -0x8000 || phase > 0x18000);

	if (phase < 0)
		phase = 0x10000 + phase;
	else
		trip = PS_PHASE_TRIP;

	return ((phase >> 2) & PS_PHASE_MASK) | trip;
}

#define SKL_MIN_SRC_W 8
#define SKL_MAX_SRC_W 4096
#define SKL_MIN_SRC_H 8
#define SKL_MAX_SRC_H 4096
#define SKL_MIN_DST_W 8
#define SKL_MAX_DST_W 4096
#define SKL_MIN_DST_H 8
#define SKL_MAX_DST_H 4096
#define ICL_MAX_SRC_W 5120
#define ICL_MAX_SRC_H 4096
#define ICL_MAX_DST_W 5120
#define ICL_MAX_DST_H 4096
#define SKL_MIN_YUV_420_SRC_W 16
#define SKL_MIN_YUV_420_SRC_H 16

static int
skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach,
		  unsigned int scaler_user, int *scaler_id,
		  int src_w, int src_h, int dst_w, int dst_h,
		  const struct drm_format_info *format,
		  u64 modifier, bool need_scaler)
{
	struct intel_crtc_scaler_state *scaler_state =
		&crtc_state->scaler_state;
	struct intel_crtc *intel_crtc =
		to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev);
	const struct drm_display_mode *adjusted_mode =
		&crtc_state->hw.adjusted_mode;

	/*
	 * Src coordinates are already rotated by 270 degrees for
	 * the 90/270 degree plane rotation cases (to match the
	 * GTT mapping), hence no need to account for rotation here.
	 */
	if (src_w != dst_w || src_h != dst_h)
		need_scaler = true;

	/*
	 * Scaling/fitting not supported in IF-ID mode in GEN9+
	 * TODO: Interlace fetch mode doesn't support YUV420 planar formats.
	 * Once NV12 is enabled, handle it here while allocating scaler
	 * for NV12.
	 */
	if (INTEL_GEN(dev_priv) >= 9 && crtc_state->hw.enable &&
	    need_scaler && adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
		drm_dbg_kms(&dev_priv->drm,
			    "Pipe/Plane scaling not supported with IF-ID mode\n");
		return -EINVAL;
	}

	/*
	 * if plane is being disabled or scaler is no more required or force detach
	 *  - free scaler binded to this plane/crtc
	 *  - in order to do this, update crtc->scaler_usage
	 *
	 * Here scaler state in crtc_state is set free so that
	 * scaler can be assigned to other user. Actual register
	 * update to free the scaler is done in plane/panel-fit programming.
	 * For this purpose crtc/plane_state->scaler_id isn't reset here.
	 */
	if (force_detach || !need_scaler) {
		if (*scaler_id >= 0) {
			scaler_state->scaler_users &= ~(1 << scaler_user);
			scaler_state->scalers[*scaler_id].in_use = 0;

			drm_dbg_kms(&dev_priv->drm,
				    "scaler_user index %u.%u: "
				    "Staged freeing scaler id %d scaler_users = 0x%x\n",
				    intel_crtc->pipe, scaler_user, *scaler_id,
				    scaler_state->scaler_users);
			*scaler_id = -1;
		}
		return 0;
	}

	if (format && intel_format_info_is_yuv_semiplanar(format, modifier) &&
	    (src_h < SKL_MIN_YUV_420_SRC_H || src_w < SKL_MIN_YUV_420_SRC_W)) {
		drm_dbg_kms(&dev_priv->drm,
			    "Planar YUV: src dimensions not met\n");
		return -EINVAL;
	}

	/* range checks */
	if (src_w < SKL_MIN_SRC_W || src_h < SKL_MIN_SRC_H ||
	    dst_w < SKL_MIN_DST_W || dst_h < SKL_MIN_DST_H ||
	    (INTEL_GEN(dev_priv) >= 11 &&
	     (src_w > ICL_MAX_SRC_W || src_h > ICL_MAX_SRC_H ||
	      dst_w > ICL_MAX_DST_W || dst_h > ICL_MAX_DST_H)) ||
	    (INTEL_GEN(dev_priv) < 11 &&
	     (src_w > SKL_MAX_SRC_W || src_h > SKL_MAX_SRC_H ||
	      dst_w > SKL_MAX_DST_W || dst_h > SKL_MAX_DST_H)))	{
		drm_dbg_kms(&dev_priv->drm,
			    "scaler_user index %u.%u: src %ux%u dst %ux%u "
			    "size is out of scaler range\n",
			    intel_crtc->pipe, scaler_user, src_w, src_h,
			    dst_w, dst_h);
		return -EINVAL;
	}

	/* mark this plane as a scaler user in crtc_state */
	scaler_state->scaler_users |= (1 << scaler_user);
	drm_dbg_kms(&dev_priv->drm, "scaler_user index %u.%u: "
		    "staged scaling request for %ux%u->%ux%u scaler_users = 0x%x\n",
		    intel_crtc->pipe, scaler_user, src_w, src_h, dst_w, dst_h,
		    scaler_state->scaler_users);

	return 0;
}

static int skl_update_scaler_crtc(struct intel_crtc_state *crtc_state)
{
	const struct drm_display_mode *adjusted_mode =
		&crtc_state->hw.adjusted_mode;
	int width, height;

	if (crtc_state->pch_pfit.enabled) {
		width = drm_rect_width(&crtc_state->pch_pfit.dst);
		height = drm_rect_height(&crtc_state->pch_pfit.dst);
	} else {
		width = adjusted_mode->crtc_hdisplay;
		height = adjusted_mode->crtc_vdisplay;
	}

	return skl_update_scaler(crtc_state, !crtc_state->hw.active,
				 SKL_CRTC_INDEX,
				 &crtc_state->scaler_state.scaler_id,
				 crtc_state->pipe_src_w, crtc_state->pipe_src_h,
				 width, height, NULL, 0,
				 crtc_state->pch_pfit.enabled);
}

/**
 * skl_update_scaler_plane - Stages update to scaler state for a given plane.
 * @crtc_state: crtc's scaler state
 * @plane_state: atomic plane state to update
 *
 * Return
 *     0 - scaler_usage updated successfully
 *    error - requested scaling cannot be supported or other error condition
 */
static int skl_update_scaler_plane(struct intel_crtc_state *crtc_state,
				   struct intel_plane_state *plane_state)
{
	struct intel_plane *intel_plane =
		to_intel_plane(plane_state->uapi.plane);
	struct drm_i915_private *dev_priv = to_i915(intel_plane->base.dev);
	struct drm_framebuffer *fb = plane_state->hw.fb;
	int ret;
	bool force_detach = !fb || !plane_state->uapi.visible;
	bool need_scaler = false;

	/* Pre-gen11 and SDR planes always need a scaler for planar formats. */
	if (!icl_is_hdr_plane(dev_priv, intel_plane->id) &&
	    fb && intel_format_info_is_yuv_semiplanar(fb->format, fb->modifier))
		need_scaler = true;

	ret = skl_update_scaler(crtc_state, force_detach,
				drm_plane_index(&intel_plane->base),
				&plane_state->scaler_id,
				drm_rect_width(&plane_state->uapi.src) >> 16,
				drm_rect_height(&plane_state->uapi.src) >> 16,
				drm_rect_width(&plane_state->uapi.dst),
				drm_rect_height(&plane_state->uapi.dst),
				fb ? fb->format : NULL,
				fb ? fb->modifier : 0,
				need_scaler);

	if (ret || plane_state->scaler_id < 0)
		return ret;

	/* check colorkey */
	if (plane_state->ckey.flags) {
		drm_dbg_kms(&dev_priv->drm,
			    "[PLANE:%d:%s] scaling with color key not allowed",
			    intel_plane->base.base.id,
			    intel_plane->base.name);
		return -EINVAL;
	}

	/* Check src format */
	switch (fb->format->format) {
	case DRM_FORMAT_RGB565:
	case DRM_FORMAT_XBGR8888:
	case DRM_FORMAT_XRGB8888:
	case DRM_FORMAT_ABGR8888:
	case DRM_FORMAT_ARGB8888:
	case DRM_FORMAT_XRGB2101010:
	case DRM_FORMAT_XBGR2101010:
	case DRM_FORMAT_ARGB2101010:
	case DRM_FORMAT_ABGR2101010:
	case DRM_FORMAT_YUYV:
	case DRM_FORMAT_YVYU:
	case DRM_FORMAT_UYVY:
	case DRM_FORMAT_VYUY:
	case DRM_FORMAT_NV12:
	case DRM_FORMAT_XYUV8888:
	case DRM_FORMAT_P010:
	case DRM_FORMAT_P012:
	case DRM_FORMAT_P016:
	case DRM_FORMAT_Y210:
	case DRM_FORMAT_Y212:
	case DRM_FORMAT_Y216:
	case DRM_FORMAT_XVYU2101010:
	case DRM_FORMAT_XVYU12_16161616:
	case DRM_FORMAT_XVYU16161616:
		break;
	case DRM_FORMAT_XBGR16161616F:
	case DRM_FORMAT_ABGR16161616F:
	case DRM_FORMAT_XRGB16161616F:
	case DRM_FORMAT_ARGB16161616F:
		if (INTEL_GEN(dev_priv) >= 11)
			break;
		fallthrough;
	default:
		drm_dbg_kms(&dev_priv->drm,
			    "[PLANE:%d:%s] FB:%d unsupported scaling format 0x%x\n",
			    intel_plane->base.base.id, intel_plane->base.name,
			    fb->base.id, fb->format->format);
		return -EINVAL;
	}

	return 0;
}

void skl_scaler_disable(const struct intel_crtc_state *old_crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->uapi.crtc);
	int i;

	for (i = 0; i < crtc->num_scalers; i++)
		skl_detach_scaler(crtc, i);
}

static void skl_pfit_enable(const struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	const struct intel_crtc_scaler_state *scaler_state =
		&crtc_state->scaler_state;
	struct drm_rect src = {
		.x2 = crtc_state->pipe_src_w << 16,
		.y2 = crtc_state->pipe_src_h << 16,
	};
	const struct drm_rect *dst = &crtc_state->pch_pfit.dst;
	u16 uv_rgb_hphase, uv_rgb_vphase;
	enum pipe pipe = crtc->pipe;
	int width = drm_rect_width(dst);
	int height = drm_rect_height(dst);
	int x = dst->x1;
	int y = dst->y1;
	int hscale, vscale;
	unsigned long irqflags;
	int id;

	if (!crtc_state->pch_pfit.enabled)
		return;

	if (drm_WARN_ON(&dev_priv->drm,
			crtc_state->scaler_state.scaler_id < 0))
		return;

	hscale = drm_rect_calc_hscale(&src, dst, 0, INT_MAX);
	vscale = drm_rect_calc_vscale(&src, dst, 0, INT_MAX);

	uv_rgb_hphase = skl_scaler_calc_phase(1, hscale, false);
	uv_rgb_vphase = skl_scaler_calc_phase(1, vscale, false);

	id = scaler_state->scaler_id;

	spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);

	intel_de_write_fw(dev_priv, SKL_PS_CTRL(pipe, id), PS_SCALER_EN |
			  PS_FILTER_MEDIUM | scaler_state->scalers[id].mode);
	intel_de_write_fw(dev_priv, SKL_PS_VPHASE(pipe, id),
			  PS_Y_PHASE(0) | PS_UV_RGB_PHASE(uv_rgb_vphase));
	intel_de_write_fw(dev_priv, SKL_PS_HPHASE(pipe, id),
			  PS_Y_PHASE(0) | PS_UV_RGB_PHASE(uv_rgb_hphase));
	intel_de_write_fw(dev_priv, SKL_PS_WIN_POS(pipe, id),
			  x << 16 | y);
	intel_de_write_fw(dev_priv, SKL_PS_WIN_SZ(pipe, id),
			  width << 16 | height);

	spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
}

static void ilk_pfit_enable(const struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	const struct drm_rect *dst = &crtc_state->pch_pfit.dst;
	enum pipe pipe = crtc->pipe;
	int width = drm_rect_width(dst);
	int height = drm_rect_height(dst);
	int x = dst->x1;
	int y = dst->y1;

	if (!crtc_state->pch_pfit.enabled)
		return;

	/* Force use of hard-coded filter coefficients
	 * as some pre-programmed values are broken,
	 * e.g. x201.
	 */
	if (IS_IVYBRIDGE(dev_priv) || IS_HASWELL(dev_priv))
		intel_de_write(dev_priv, PF_CTL(pipe), PF_ENABLE |
			       PF_FILTER_MED_3x3 | PF_PIPE_SEL_IVB(pipe));
	else
		intel_de_write(dev_priv, PF_CTL(pipe), PF_ENABLE |
			       PF_FILTER_MED_3x3);
	intel_de_write(dev_priv, PF_WIN_POS(pipe), x << 16 | y);
	intel_de_write(dev_priv, PF_WIN_SZ(pipe), width << 16 | height);
}

void hsw_enable_ips(const struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_device *dev = crtc->base.dev;
	struct drm_i915_private *dev_priv = to_i915(dev);

	if (!crtc_state->ips_enabled)
		return;

	/*
	 * We can only enable IPS after we enable a plane and wait for a vblank
	 * This function is called from post_plane_update, which is run after
	 * a vblank wait.
	 */
	drm_WARN_ON(dev, !(crtc_state->active_planes & ~BIT(PLANE_CURSOR)));

	if (IS_BROADWELL(dev_priv)) {
		drm_WARN_ON(dev, sandybridge_pcode_write(dev_priv, DISPLAY_IPS_CONTROL,
							 IPS_ENABLE | IPS_PCODE_CONTROL));
		/* Quoting Art Runyan: "its not safe to expect any particular
		 * value in IPS_CTL bit 31 after enabling IPS through the
		 * mailbox." Moreover, the mailbox may return a bogus state,
		 * so we need to just enable it and continue on.
		 */
	} else {
		intel_de_write(dev_priv, IPS_CTL, IPS_ENABLE);
		/* The bit only becomes 1 in the next vblank, so this wait here
		 * is essentially intel_wait_for_vblank. If we don't have this
		 * and don't wait for vblanks until the end of crtc_enable, then
		 * the HW state readout code will complain that the expected
		 * IPS_CTL value is not the one we read. */
		if (intel_de_wait_for_set(dev_priv, IPS_CTL, IPS_ENABLE, 50))
			drm_err(&dev_priv->drm,
				"Timed out waiting for IPS enable\n");
	}
}

void hsw_disable_ips(const struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_device *dev = crtc->base.dev;
	struct drm_i915_private *dev_priv = to_i915(dev);

	if (!crtc_state->ips_enabled)
		return;

	if (IS_BROADWELL(dev_priv)) {
		drm_WARN_ON(dev,
			    sandybridge_pcode_write(dev_priv, DISPLAY_IPS_CONTROL, 0));
		/*
		 * Wait for PCODE to finish disabling IPS. The BSpec specified
		 * 42ms timeout value leads to occasional timeouts so use 100ms
		 * instead.
		 */
		if (intel_de_wait_for_clear(dev_priv, IPS_CTL, IPS_ENABLE, 100))
			drm_err(&dev_priv->drm,
				"Timed out waiting for IPS disable\n");
	} else {
		intel_de_write(dev_priv, IPS_CTL, 0);
		intel_de_posting_read(dev_priv, IPS_CTL);
	}

	/* We need to wait for a vblank before we can disable the plane. */
	intel_wait_for_vblank(dev_priv, crtc->pipe);
}

static void intel_crtc_dpms_overlay_disable(struct intel_crtc *intel_crtc)
{
	if (intel_crtc->overlay)
		(void) intel_overlay_switch_off(intel_crtc->overlay);

	/* Let userspace switch the overlay on again. In most cases userspace
	 * has to recompute where to put it anyway.
	 */
}

static bool hsw_pre_update_disable_ips(const struct intel_crtc_state *old_crtc_state,
				       const struct intel_crtc_state *new_crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);

	if (!old_crtc_state->ips_enabled)
		return false;

	if (needs_modeset(new_crtc_state))
		return true;

	/*
	 * Workaround : Do not read or write the pipe palette/gamma data while
	 * GAMMA_MODE is configured for split gamma and IPS_CTL has IPS enabled.
	 *
	 * Disable IPS before we program the LUT.
	 */
	if (IS_HASWELL(dev_priv) &&
	    (new_crtc_state->uapi.color_mgmt_changed ||
	     new_crtc_state->update_pipe) &&
	    new_crtc_state->gamma_mode == GAMMA_MODE_MODE_SPLIT)
		return true;

	return !new_crtc_state->ips_enabled;
}

static bool hsw_post_update_enable_ips(const struct intel_crtc_state *old_crtc_state,
				       const struct intel_crtc_state *new_crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);

	if (!new_crtc_state->ips_enabled)
		return false;

	if (needs_modeset(new_crtc_state))
		return true;

	/*
	 * Workaround : Do not read or write the pipe palette/gamma data while
	 * GAMMA_MODE is configured for split gamma and IPS_CTL has IPS enabled.
	 *
	 * Re-enable IPS after the LUT has been programmed.
	 */
	if (IS_HASWELL(dev_priv) &&
	    (new_crtc_state->uapi.color_mgmt_changed ||
	     new_crtc_state->update_pipe) &&
	    new_crtc_state->gamma_mode == GAMMA_MODE_MODE_SPLIT)
		return true;

	/*
	 * We can't read out IPS on broadwell, assume the worst and
	 * forcibly enable IPS on the first fastset.
	 */
	if (new_crtc_state->update_pipe && old_crtc_state->inherited)
		return true;

	return !old_crtc_state->ips_enabled;
}

static bool needs_nv12_wa(const struct intel_crtc_state *crtc_state)
{
	struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);

	if (!crtc_state->nv12_planes)
		return false;

	/* WA Display #0827: Gen9:all */
	if (IS_GEN(dev_priv, 9) && !IS_GEMINILAKE(dev_priv))
		return true;

	return false;
}

static bool needs_scalerclk_wa(const struct intel_crtc_state *crtc_state)
{
	struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);

	/* Wa_2006604312:icl,ehl */
	if (crtc_state->scaler_state.scaler_users > 0 && IS_GEN(dev_priv, 11))
		return true;

	return false;
}

static bool planes_enabling(const struct intel_crtc_state *old_crtc_state,
			    const struct intel_crtc_state *new_crtc_state)
{
	return (!old_crtc_state->active_planes || needs_modeset(new_crtc_state)) &&
		new_crtc_state->active_planes;
}

static bool planes_disabling(const struct intel_crtc_state *old_crtc_state,
			     const struct intel_crtc_state *new_crtc_state)
{
	return old_crtc_state->active_planes &&
		(!new_crtc_state->active_planes || needs_modeset(new_crtc_state));
}

static void intel_post_plane_update(struct intel_atomic_state *state,
				    struct intel_crtc *crtc)
{
	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
	const struct intel_crtc_state *old_crtc_state =
		intel_atomic_get_old_crtc_state(state, crtc);
	const struct intel_crtc_state *new_crtc_state =
		intel_atomic_get_new_crtc_state(state, crtc);
	enum pipe pipe = crtc->pipe;

	intel_frontbuffer_flip(dev_priv, new_crtc_state->fb_bits);

	if (new_crtc_state->update_wm_post && new_crtc_state->hw.active)
		intel_update_watermarks(crtc);

	if (hsw_post_update_enable_ips(old_crtc_state, new_crtc_state))
		hsw_enable_ips(new_crtc_state);

	intel_fbc_post_update(state, crtc);

	if (needs_nv12_wa(old_crtc_state) &&
	    !needs_nv12_wa(new_crtc_state))
		skl_wa_827(dev_priv, pipe, false);

	if (needs_scalerclk_wa(old_crtc_state) &&
	    !needs_scalerclk_wa(new_crtc_state))
		icl_wa_scalerclkgating(dev_priv, pipe, false);
}

static void intel_pre_plane_update(struct intel_atomic_state *state,
				   struct intel_crtc *crtc)
{
	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
	const struct intel_crtc_state *old_crtc_state =
		intel_atomic_get_old_crtc_state(state, crtc);
	const struct intel_crtc_state *new_crtc_state =
		intel_atomic_get_new_crtc_state(state, crtc);
	enum pipe pipe = crtc->pipe;

	if (hsw_pre_update_disable_ips(old_crtc_state, new_crtc_state))
		hsw_disable_ips(old_crtc_state);

	if (intel_fbc_pre_update(state, crtc))
		intel_wait_for_vblank(dev_priv, pipe);

	/* Display WA 827 */
	if (!needs_nv12_wa(old_crtc_state) &&
	    needs_nv12_wa(new_crtc_state))
		skl_wa_827(dev_priv, pipe, true);

	/* Wa_2006604312:icl,ehl */
	if (!needs_scalerclk_wa(old_crtc_state) &&
	    needs_scalerclk_wa(new_crtc_state))
		icl_wa_scalerclkgating(dev_priv, pipe, true);

	/*
	 * Vblank time updates from the shadow to live plane control register
	 * are blocked if the memory self-refresh mode is active at that
	 * moment. So to make sure the plane gets truly disabled, disable
	 * first the self-refresh mode. The self-refresh enable bit in turn
	 * will be checked/applied by the HW only at the next frame start
	 * event which is after the vblank start event, so we need to have a
	 * wait-for-vblank between disabling the plane and the pipe.
	 */
	if (HAS_GMCH(dev_priv) && old_crtc_state->hw.active &&
	    new_crtc_state->disable_cxsr && intel_set_memory_cxsr(dev_priv, false))
		intel_wait_for_vblank(dev_priv, pipe);

	/*
	 * IVB workaround: must disable low power watermarks for at least
	 * one frame before enabling scaling.  LP watermarks can be re-enabled
	 * when scaling is disabled.
	 *
	 * WaCxSRDisabledForSpriteScaling:ivb
	 */
	if (old_crtc_state->hw.active &&
	    new_crtc_state->disable_lp_wm && ilk_disable_lp_wm(dev_priv))
		intel_wait_for_vblank(dev_priv, pipe);

	/*
	 * If we're doing a modeset we don't need to do any
	 * pre-vblank watermark programming here.
	 */
	if (!needs_modeset(new_crtc_state)) {
		/*
		 * For platforms that support atomic watermarks, program the
		 * 'intermediate' watermarks immediately.  On pre-gen9 platforms, these
		 * will be the intermediate values that are safe for both pre- and
		 * post- vblank; when vblank happens, the 'active' values will be set
		 * to the final 'target' values and we'll do this again to get the
		 * optimal watermarks.  For gen9+ platforms, the values we program here
		 * will be the final target values which will get automatically latched
		 * at vblank time; no further programming will be necessary.
		 *
		 * If a platform hasn't been transitioned to atomic watermarks yet,
		 * we'll continue to update watermarks the old way, if flags tell
		 * us to.
		 */
		if (dev_priv->display.initial_watermarks)
			dev_priv->display.initial_watermarks(state, crtc);
		else if (new_crtc_state->update_wm_pre)
			intel_update_watermarks(crtc);
	}

	/*
	 * Gen2 reports pipe underruns whenever all planes are disabled.
	 * So disable underrun reporting before all the planes get disabled.
	 *
	 * We do this after .initial_watermarks() so that we have a
	 * chance of catching underruns with the intermediate watermarks
	 * vs. the old plane configuration.
	 */
	if (IS_GEN(dev_priv, 2) && planes_disabling(old_crtc_state, new_crtc_state))
		intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
}

static void intel_crtc_disable_planes(struct intel_atomic_state *state,
				      struct intel_crtc *crtc)
{
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	const struct intel_crtc_state *new_crtc_state =
		intel_atomic_get_new_crtc_state(state, crtc);
	unsigned int update_mask = new_crtc_state->update_planes;
	const struct intel_plane_state *old_plane_state;
	struct intel_plane *plane;
	unsigned fb_bits = 0;
	int i;

	intel_crtc_dpms_overlay_disable(crtc);

	for_each_old_intel_plane_in_state(state, plane, old_plane_state, i) {
		if (crtc->pipe != plane->pipe ||
		    !(update_mask & BIT(plane->id)))
			continue;

		intel_disable_plane(plane, new_crtc_state);

		if (old_plane_state->uapi.visible)
			fb_bits |= plane->frontbuffer_bit;
	}

	intel_frontbuffer_flip(dev_priv, fb_bits);
}

/*
 * intel_connector_primary_encoder - get the primary encoder for a connector
 * @connector: connector for which to return the encoder
 *
 * Returns the primary encoder for a connector. There is a 1:1 mapping from
 * all connectors to their encoder, except for DP-MST connectors which have
 * both a virtual and a primary encoder. These DP-MST primary encoders can be
 * pointed to by as many DP-MST connectors as there are pipes.
 */
static struct intel_encoder *
intel_connector_primary_encoder(struct intel_connector *connector)
{
	struct intel_encoder *encoder;

	if (connector->mst_port)
		return &dp_to_dig_port(connector->mst_port)->base;

	encoder = intel_attached_encoder(connector);
	drm_WARN_ON(connector->base.dev, !encoder);

	return encoder;
}

static void intel_encoders_update_prepare(struct intel_atomic_state *state)
{
	struct drm_connector_state *new_conn_state;
	struct drm_connector *connector;
	int i;

	for_each_new_connector_in_state(&state->base, connector, new_conn_state,
					i) {
		struct intel_connector *intel_connector;
		struct intel_encoder *encoder;
		struct intel_crtc *crtc;

		if (!intel_connector_needs_modeset(state, connector))
			continue;

		intel_connector = to_intel_connector(connector);
		encoder = intel_connector_primary_encoder(intel_connector);
		if (!encoder->update_prepare)
			continue;

		crtc = new_conn_state->crtc ?
			to_intel_crtc(new_conn_state->crtc) : NULL;
		encoder->update_prepare(state, encoder, crtc);
	}
}

static void intel_encoders_update_complete(struct intel_atomic_state *state)
{
	struct drm_connector_state *new_conn_state;
	struct drm_connector *connector;
	int i;

	for_each_new_connector_in_state(&state->base, connector, new_conn_state,
					i) {
		struct intel_connector *intel_connector;
		struct intel_encoder *encoder;
		struct intel_crtc *crtc;

		if (!intel_connector_needs_modeset(state, connector))
			continue;

		intel_connector = to_intel_connector(connector);
		encoder = intel_connector_primary_encoder(intel_connector);
		if (!encoder->update_complete)
			continue;

		crtc = new_conn_state->crtc ?
			to_intel_crtc(new_conn_state->crtc) : NULL;
		encoder->update_complete(state, encoder, crtc);
	}
}

static void intel_encoders_pre_pll_enable(struct intel_atomic_state *state,
					  struct intel_crtc *crtc)
{
	const struct intel_crtc_state *crtc_state =
		intel_atomic_get_new_crtc_state(state, crtc);
	const struct drm_connector_state *conn_state;
	struct drm_connector *conn;
	int i;

	for_each_new_connector_in_state(&state->base, conn, conn_state, i) {
		struct intel_encoder *encoder =
			to_intel_encoder(conn_state->best_encoder);

		if (conn_state->crtc != &crtc->base)
			continue;

		if (encoder->pre_pll_enable)
			encoder->pre_pll_enable(state, encoder,
						crtc_state, conn_state);
	}
}

static void intel_encoders_pre_enable(struct intel_atomic_state *state,
				      struct intel_crtc *crtc)
{
	const struct intel_crtc_state *crtc_state =
		intel_atomic_get_new_crtc_state(state, crtc);
	const struct drm_connector_state *conn_state;
	struct drm_connector *conn;
	int i;

	for_each_new_connector_in_state(&state->base, conn, conn_state, i) {
		struct intel_encoder *encoder =
			to_intel_encoder(conn_state->best_encoder);

		if (conn_state->crtc != &crtc->base)
			continue;

		if (encoder->pre_enable)
			encoder->pre_enable(state, encoder,
					    crtc_state, conn_state);
	}
}

static void intel_encoders_enable(struct intel_atomic_state *state,
				  struct intel_crtc *crtc)
{
	const struct intel_crtc_state *crtc_state =
		intel_atomic_get_new_crtc_state(state, crtc);
	const struct drm_connector_state *conn_state;
	struct drm_connector *conn;
	int i;

	for_each_new_connector_in_state(&state->base, conn, conn_state, i) {
		struct intel_encoder *encoder =
			to_intel_encoder(conn_state->best_encoder);

		if (conn_state->crtc != &crtc->base)
			continue;

		if (encoder->enable)
			encoder->enable(state, encoder,
					crtc_state, conn_state);
		intel_opregion_notify_encoder(encoder, true);
	}
}

static void intel_encoders_disable(struct intel_atomic_state *state,
				   struct intel_crtc *crtc)
{
	const struct intel_crtc_state *old_crtc_state =
		intel_atomic_get_old_crtc_state(state, crtc);
	const struct drm_connector_state *old_conn_state;
	struct drm_connector *conn;
	int i;

	for_each_old_connector_in_state(&state->base, conn, old_conn_state, i) {
		struct intel_encoder *encoder =
			to_intel_encoder(old_conn_state->best_encoder);

		if (old_conn_state->crtc != &crtc->base)
			continue;

		intel_opregion_notify_encoder(encoder, false);
		if (encoder->disable)
			encoder->disable(state, encoder,
					 old_crtc_state, old_conn_state);
	}
}

static void intel_encoders_post_disable(struct intel_atomic_state *state,
					struct intel_crtc *crtc)
{
	const struct intel_crtc_state *old_crtc_state =
		intel_atomic_get_old_crtc_state(state, crtc);
	const struct drm_connector_state *old_conn_state;
	struct drm_connector *conn;
	int i;

	for_each_old_connector_in_state(&state->base, conn, old_conn_state, i) {
		struct intel_encoder *encoder =
			to_intel_encoder(old_conn_state->best_encoder);

		if (old_conn_state->crtc != &crtc->base)
			continue;

		if (encoder->post_disable)
			encoder->post_disable(state, encoder,
					      old_crtc_state, old_conn_state);
	}
}

static void intel_encoders_post_pll_disable(struct intel_atomic_state *state,
					    struct intel_crtc *crtc)
{
	const struct intel_crtc_state *old_crtc_state =
		intel_atomic_get_old_crtc_state(state, crtc);
	const struct drm_connector_state *old_conn_state;
	struct drm_connector *conn;
	int i;

	for_each_old_connector_in_state(&state->base, conn, old_conn_state, i) {
		struct intel_encoder *encoder =
			to_intel_encoder(old_conn_state->best_encoder);

		if (old_conn_state->crtc != &crtc->base)
			continue;

		if (encoder->post_pll_disable)
			encoder->post_pll_disable(state, encoder,
						  old_crtc_state, old_conn_state);
	}
}

static void intel_encoders_update_pipe(struct intel_atomic_state *state,
				       struct intel_crtc *crtc)
{
	const struct intel_crtc_state *crtc_state =
		intel_atomic_get_new_crtc_state(state, crtc);
	const struct drm_connector_state *conn_state;
	struct drm_connector *conn;
	int i;

	for_each_new_connector_in_state(&state->base, conn, conn_state, i) {
		struct intel_encoder *encoder =
			to_intel_encoder(conn_state->best_encoder);

		if (conn_state->crtc != &crtc->base)
			continue;

		if (encoder->update_pipe)
			encoder->update_pipe(state, encoder,
					     crtc_state, conn_state);
	}
}

static void intel_disable_primary_plane(const struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct intel_plane *plane = to_intel_plane(crtc->base.primary);

	plane->disable_plane(plane, crtc_state);
}

static void ilk_crtc_enable(struct intel_atomic_state *state,
			    struct intel_crtc *crtc)
{
	const struct intel_crtc_state *new_crtc_state =
		intel_atomic_get_new_crtc_state(state, crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	enum pipe pipe = crtc->pipe;

	if (drm_WARN_ON(&dev_priv->drm, crtc->active))
		return;

	/*
	 * Sometimes spurious CPU pipe underruns happen during FDI
	 * training, at least with VGA+HDMI cloning. Suppress them.
	 *
	 * On ILK we get an occasional spurious CPU pipe underruns
	 * between eDP port A enable and vdd enable. Also PCH port
	 * enable seems to result in the occasional CPU pipe underrun.
	 *
	 * Spurious PCH underruns also occur during PCH enabling.
	 */
	intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
	intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, false);

	if (new_crtc_state->has_pch_encoder)
		intel_prepare_shared_dpll(new_crtc_state);

	if (intel_crtc_has_dp_encoder(new_crtc_state))
		intel_dp_set_m_n(new_crtc_state, M1_N1);

	intel_set_pipe_timings(new_crtc_state);
	intel_set_pipe_src_size(new_crtc_state);

	if (new_crtc_state->has_pch_encoder)
		intel_cpu_transcoder_set_m_n(new_crtc_state,
					     &new_crtc_state->fdi_m_n, NULL);

	ilk_set_pipeconf(new_crtc_state);

	crtc->active = true;

	intel_encoders_pre_enable(state, crtc);

	if (new_crtc_state->has_pch_encoder) {
		/* Note: FDI PLL enabling _must_ be done before we enable the
		 * cpu pipes, hence this is separate from all the other fdi/pch
		 * enabling. */
		ilk_fdi_pll_enable(new_crtc_state);
	} else {
		assert_fdi_tx_disabled(dev_priv, pipe);
		assert_fdi_rx_disabled(dev_priv, pipe);
	}

	ilk_pfit_enable(new_crtc_state);

	/*
	 * On ILK+ LUT must be loaded before the pipe is running but with
	 * clocks enabled
	 */
	intel_color_load_luts(new_crtc_state);
	intel_color_commit(new_crtc_state);
	/* update DSPCNTR to configure gamma for pipe bottom color */
	intel_disable_primary_plane(new_crtc_state);

	if (dev_priv->display.initial_watermarks)
		dev_priv->display.initial_watermarks(state, crtc);
	intel_enable_pipe(new_crtc_state);

	if (new_crtc_state->has_pch_encoder)
		ilk_pch_enable(state, new_crtc_state);

	intel_crtc_vblank_on(new_crtc_state);

	intel_encoders_enable(state, crtc);

	if (HAS_PCH_CPT(dev_priv))
		cpt_verify_modeset(dev_priv, pipe);

	/*
	 * Must wait for vblank to avoid spurious PCH FIFO underruns.
	 * And a second vblank wait is needed at least on ILK with
	 * some interlaced HDMI modes. Let's do the double wait always
	 * in case there are more corner cases we don't know about.
	 */
	if (new_crtc_state->has_pch_encoder) {
		intel_wait_for_vblank(dev_priv, pipe);
		intel_wait_for_vblank(dev_priv, pipe);
	}
	intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
	intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, true);
}

/* IPS only exists on ULT machines and is tied to pipe A. */
static bool hsw_crtc_supports_ips(struct intel_crtc *crtc)
{
	return HAS_IPS(to_i915(crtc->base.dev)) && crtc->pipe == PIPE_A;
}

static void glk_pipe_scaler_clock_gating_wa(struct drm_i915_private *dev_priv,
					    enum pipe pipe, bool apply)
{
	u32 val = intel_de_read(dev_priv, CLKGATE_DIS_PSL(pipe));
	u32 mask = DPF_GATING_DIS | DPF_RAM_GATING_DIS | DPFR_GATING_DIS;

	if (apply)
		val |= mask;
	else
		val &= ~mask;

	intel_de_write(dev_priv, CLKGATE_DIS_PSL(pipe), val);
}

static void icl_pipe_mbus_enable(struct intel_crtc *crtc)
{
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	enum pipe pipe = crtc->pipe;
	u32 val;

	val = MBUS_DBOX_A_CREDIT(2);

	if (INTEL_GEN(dev_priv) >= 12) {
		val |= MBUS_DBOX_BW_CREDIT(2);
		val |= MBUS_DBOX_B_CREDIT(12);
	} else {
		val |= MBUS_DBOX_BW_CREDIT(1);
		val |= MBUS_DBOX_B_CREDIT(8);
	}

	intel_de_write(dev_priv, PIPE_MBUS_DBOX_CTL(pipe), val);
}

static void hsw_set_linetime_wm(const struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);

	intel_de_write(dev_priv, WM_LINETIME(crtc->pipe),
		       HSW_LINETIME(crtc_state->linetime) |
		       HSW_IPS_LINETIME(crtc_state->ips_linetime));
}

static void hsw_set_frame_start_delay(const struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	i915_reg_t reg = CHICKEN_TRANS(crtc_state->cpu_transcoder);
	u32 val;

	val = intel_de_read(dev_priv, reg);
	val &= ~HSW_FRAME_START_DELAY_MASK;
	val |= HSW_FRAME_START_DELAY(0);
	intel_de_write(dev_priv, reg, val);
}

static void hsw_crtc_enable(struct intel_atomic_state *state,
			    struct intel_crtc *crtc)
{
	const struct intel_crtc_state *new_crtc_state =
		intel_atomic_get_new_crtc_state(state, crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	enum pipe pipe = crtc->pipe, hsw_workaround_pipe;
	enum transcoder cpu_transcoder = new_crtc_state->cpu_transcoder;
	bool psl_clkgate_wa;

	if (drm_WARN_ON(&dev_priv->drm, crtc->active))
		return;

	intel_encoders_pre_pll_enable(state, crtc);

	if (new_crtc_state->shared_dpll)
		intel_enable_shared_dpll(new_crtc_state);

	intel_encoders_pre_enable(state, crtc);

	if (!transcoder_is_dsi(cpu_transcoder))
		intel_set_pipe_timings(new_crtc_state);

	intel_set_pipe_src_size(new_crtc_state);

	if (cpu_transcoder != TRANSCODER_EDP &&
	    !transcoder_is_dsi(cpu_transcoder))
		intel_de_write(dev_priv, PIPE_MULT(cpu_transcoder),
			       new_crtc_state->pixel_multiplier - 1);

	if (new_crtc_state->has_pch_encoder)
		intel_cpu_transcoder_set_m_n(new_crtc_state,
					     &new_crtc_state->fdi_m_n, NULL);

	if (!transcoder_is_dsi(cpu_transcoder)) {
		hsw_set_frame_start_delay(new_crtc_state);
		hsw_set_pipeconf(new_crtc_state);
	}

	if (INTEL_GEN(dev_priv) >= 9 || IS_BROADWELL(dev_priv))
		bdw_set_pipemisc(new_crtc_state);

	crtc->active = true;

	/* Display WA #1180: WaDisableScalarClockGating: glk, cnl */
	psl_clkgate_wa = (IS_GEMINILAKE(dev_priv) || IS_CANNONLAKE(dev_priv)) &&
		new_crtc_state->pch_pfit.enabled;
	if (psl_clkgate_wa)
		glk_pipe_scaler_clock_gating_wa(dev_priv, pipe, true);

	if (INTEL_GEN(dev_priv) >= 9)
		skl_pfit_enable(new_crtc_state);
	else
		ilk_pfit_enable(new_crtc_state);

	/*
	 * On ILK+ LUT must be loaded before the pipe is running but with
	 * clocks enabled
	 */
	intel_color_load_luts(new_crtc_state);
	intel_color_commit(new_crtc_state);
	/* update DSPCNTR to configure gamma/csc for pipe bottom color */
	if (INTEL_GEN(dev_priv) < 9)
		intel_disable_primary_plane(new_crtc_state);

	hsw_set_linetime_wm(new_crtc_state);

	if (INTEL_GEN(dev_priv) >= 11)
		icl_set_pipe_chicken(crtc);

	if (dev_priv->display.initial_watermarks)
		dev_priv->display.initial_watermarks(state, crtc);

	if (INTEL_GEN(dev_priv) >= 11)
		icl_pipe_mbus_enable(crtc);

	intel_encoders_enable(state, crtc);

	if (psl_clkgate_wa) {
		intel_wait_for_vblank(dev_priv, pipe);
		glk_pipe_scaler_clock_gating_wa(dev_priv, pipe, false);
	}

	/* If we change the relative order between pipe/planes enabling, we need
	 * to change the workaround. */
	hsw_workaround_pipe = new_crtc_state->hsw_workaround_pipe;
	if (IS_HASWELL(dev_priv) && hsw_workaround_pipe != INVALID_PIPE) {
		intel_wait_for_vblank(dev_priv, hsw_workaround_pipe);
		intel_wait_for_vblank(dev_priv, hsw_workaround_pipe);
	}
}

void ilk_pfit_disable(const struct intel_crtc_state *old_crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	enum pipe pipe = crtc->pipe;

	/* To avoid upsetting the power well on haswell only disable the pfit if
	 * it's in use. The hw state code will make sure we get this right. */
	if (!old_crtc_state->pch_pfit.enabled)
		return;

	intel_de_write(dev_priv, PF_CTL(pipe), 0);
	intel_de_write(dev_priv, PF_WIN_POS(pipe), 0);
	intel_de_write(dev_priv, PF_WIN_SZ(pipe), 0);
}

static void ilk_crtc_disable(struct intel_atomic_state *state,
			     struct intel_crtc *crtc)
{
	const struct intel_crtc_state *old_crtc_state =
		intel_atomic_get_old_crtc_state(state, crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	enum pipe pipe = crtc->pipe;

	/*
	 * Sometimes spurious CPU pipe underruns happen when the
	 * pipe is already disabled, but FDI RX/TX is still enabled.
	 * Happens at least with VGA+HDMI cloning. Suppress them.
	 */
	intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
	intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, false);

	intel_encoders_disable(state, crtc);

	intel_crtc_vblank_off(old_crtc_state);

	intel_disable_pipe(old_crtc_state);

	ilk_pfit_disable(old_crtc_state);

	if (old_crtc_state->has_pch_encoder)
		ilk_fdi_disable(crtc);

	intel_encoders_post_disable(state, crtc);

	if (old_crtc_state->has_pch_encoder) {
		ilk_disable_pch_transcoder(dev_priv, pipe);

		if (HAS_PCH_CPT(dev_priv)) {
			i915_reg_t reg;
			u32 temp;

			/* disable TRANS_DP_CTL */
			reg = TRANS_DP_CTL(pipe);
			temp = intel_de_read(dev_priv, reg);
			temp &= ~(TRANS_DP_OUTPUT_ENABLE |
				  TRANS_DP_PORT_SEL_MASK);
			temp |= TRANS_DP_PORT_SEL_NONE;
			intel_de_write(dev_priv, reg, temp);

			/* disable DPLL_SEL */
			temp = intel_de_read(dev_priv, PCH_DPLL_SEL);
			temp &= ~(TRANS_DPLL_ENABLE(pipe) | TRANS_DPLLB_SEL(pipe));
			intel_de_write(dev_priv, PCH_DPLL_SEL, temp);
		}

		ilk_fdi_pll_disable(crtc);
	}

	intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
	intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, true);
}

static void hsw_crtc_disable(struct intel_atomic_state *state,
			     struct intel_crtc *crtc)
{
	/*
	 * FIXME collapse everything to one hook.
	 * Need care with mst->ddi interactions.
	 */
	intel_encoders_disable(state, crtc);
	intel_encoders_post_disable(state, crtc);
}

static void i9xx_pfit_enable(const struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);

	if (!crtc_state->gmch_pfit.control)
		return;

	/*
	 * The panel fitter should only be adjusted whilst the pipe is disabled,
	 * according to register description and PRM.
	 */
	drm_WARN_ON(&dev_priv->drm,
		    intel_de_read(dev_priv, PFIT_CONTROL) & PFIT_ENABLE);
	assert_pipe_disabled(dev_priv, crtc_state->cpu_transcoder);

	intel_de_write(dev_priv, PFIT_PGM_RATIOS,
		       crtc_state->gmch_pfit.pgm_ratios);
	intel_de_write(dev_priv, PFIT_CONTROL, crtc_state->gmch_pfit.control);

	/* Border color in case we don't scale up to the full screen. Black by
	 * default, change to something else for debugging. */
	intel_de_write(dev_priv, BCLRPAT(crtc->pipe), 0);
}

bool intel_phy_is_combo(struct drm_i915_private *dev_priv, enum phy phy)
{
	if (phy == PHY_NONE)
		return false;
	else if (IS_ROCKETLAKE(dev_priv))
		return phy <= PHY_D;
	else if (IS_ELKHARTLAKE(dev_priv))
		return phy <= PHY_C;
	else if (INTEL_GEN(dev_priv) >= 11)
		return phy <= PHY_B;
	else
		return false;
}

bool intel_phy_is_tc(struct drm_i915_private *dev_priv, enum phy phy)
{
	if (IS_ROCKETLAKE(dev_priv))
		return false;
	else if (INTEL_GEN(dev_priv) >= 12)
		return phy >= PHY_D && phy <= PHY_I;
	else if (INTEL_GEN(dev_priv) >= 11 && !IS_ELKHARTLAKE(dev_priv))
		return phy >= PHY_C && phy <= PHY_F;
	else
		return false;
}

enum phy intel_port_to_phy(struct drm_i915_private *i915, enum port port)
{
	if (IS_ROCKETLAKE(i915) && port >= PORT_D)
		return (enum phy)port - 1;
	else if (IS_ELKHARTLAKE(i915) && port == PORT_D)
		return PHY_A;

	return (enum phy)port;
}

enum tc_port intel_port_to_tc(struct drm_i915_private *dev_priv, enum port port)
{
	if (!intel_phy_is_tc(dev_priv, intel_port_to_phy(dev_priv, port)))
		return PORT_TC_NONE;

	if (INTEL_GEN(dev_priv) >= 12)
		return port - PORT_D;

	return port - PORT_C;
}

enum intel_display_power_domain intel_port_to_power_domain(enum port port)
{
	switch (port) {
	case PORT_A:
		return POWER_DOMAIN_PORT_DDI_A_LANES;
	case PORT_B:
		return POWER_DOMAIN_PORT_DDI_B_LANES;
	case PORT_C:
		return POWER_DOMAIN_PORT_DDI_C_LANES;
	case PORT_D:
		return POWER_DOMAIN_PORT_DDI_D_LANES;
	case PORT_E:
		return POWER_DOMAIN_PORT_DDI_E_LANES;
	case PORT_F:
		return POWER_DOMAIN_PORT_DDI_F_LANES;
	case PORT_G:
		return POWER_DOMAIN_PORT_DDI_G_LANES;
	case PORT_H:
		return POWER_DOMAIN_PORT_DDI_H_LANES;
	case PORT_I:
		return POWER_DOMAIN_PORT_DDI_I_LANES;
	default:
		MISSING_CASE(port);
		return POWER_DOMAIN_PORT_OTHER;
	}
}

enum intel_display_power_domain
intel_aux_power_domain(struct intel_digital_port *dig_port)
{
	struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
	enum phy phy = intel_port_to_phy(dev_priv, dig_port->base.port);

	if (intel_phy_is_tc(dev_priv, phy) &&
	    dig_port->tc_mode == TC_PORT_TBT_ALT) {
		switch (dig_port->aux_ch) {
		case AUX_CH_C:
			return POWER_DOMAIN_AUX_C_TBT;
		case AUX_CH_D:
			return POWER_DOMAIN_AUX_D_TBT;
		case AUX_CH_E:
			return POWER_DOMAIN_AUX_E_TBT;
		case AUX_CH_F:
			return POWER_DOMAIN_AUX_F_TBT;
		case AUX_CH_G:
			return POWER_DOMAIN_AUX_G_TBT;
		case AUX_CH_H:
			return POWER_DOMAIN_AUX_H_TBT;
		case AUX_CH_I:
			return POWER_DOMAIN_AUX_I_TBT;
		default:
			MISSING_CASE(dig_port->aux_ch);
			return POWER_DOMAIN_AUX_C_TBT;
		}
	}

	return intel_legacy_aux_to_power_domain(dig_port->aux_ch);
}

/*
 * Converts aux_ch to power_domain without caring about TBT ports for that use
 * intel_aux_power_domain()
 */
enum intel_display_power_domain
intel_legacy_aux_to_power_domain(enum aux_ch aux_ch)
{
	switch (aux_ch) {
	case AUX_CH_A:
		return POWER_DOMAIN_AUX_A;
	case AUX_CH_B:
		return POWER_DOMAIN_AUX_B;
	case AUX_CH_C:
		return POWER_DOMAIN_AUX_C;
	case AUX_CH_D:
		return POWER_DOMAIN_AUX_D;
	case AUX_CH_E:
		return POWER_DOMAIN_AUX_E;
	case AUX_CH_F:
		return POWER_DOMAIN_AUX_F;
	case AUX_CH_G:
		return POWER_DOMAIN_AUX_G;
	case AUX_CH_H:
		return POWER_DOMAIN_AUX_H;
	case AUX_CH_I:
		return POWER_DOMAIN_AUX_I;
	default:
		MISSING_CASE(aux_ch);
		return POWER_DOMAIN_AUX_A;
	}
}

static u64 get_crtc_power_domains(struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	struct drm_encoder *encoder;
	enum pipe pipe = crtc->pipe;
	u64 mask;
	enum transcoder transcoder = crtc_state->cpu_transcoder;

	if (!crtc_state->hw.active)
		return 0;

	mask = BIT_ULL(POWER_DOMAIN_PIPE(pipe));
	mask |= BIT_ULL(POWER_DOMAIN_TRANSCODER(transcoder));
	if (crtc_state->pch_pfit.enabled ||
	    crtc_state->pch_pfit.force_thru)
		mask |= BIT_ULL(POWER_DOMAIN_PIPE_PANEL_FITTER(pipe));

	drm_for_each_encoder_mask(encoder, &dev_priv->drm,
				  crtc_state->uapi.encoder_mask) {
		struct intel_encoder *intel_encoder = to_intel_encoder(encoder);

		mask |= BIT_ULL(intel_encoder->power_domain);
	}

	if (HAS_DDI(dev_priv) && crtc_state->has_audio)
		mask |= BIT_ULL(POWER_DOMAIN_AUDIO);

	if (crtc_state->shared_dpll)
		mask |= BIT_ULL(POWER_DOMAIN_DISPLAY_CORE);

	return mask;
}

static u64
modeset_get_crtc_power_domains(struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	enum intel_display_power_domain domain;
	u64 domains, new_domains, old_domains;

	old_domains = crtc->enabled_power_domains;
	crtc->enabled_power_domains = new_domains =
		get_crtc_power_domains(crtc_state);

	domains = new_domains & ~old_domains;

	for_each_power_domain(domain, domains)
		intel_display_power_get(dev_priv, domain);

	return old_domains & ~new_domains;
}

static void modeset_put_power_domains(struct drm_i915_private *dev_priv,
				      u64 domains)
{
	enum intel_display_power_domain domain;

	for_each_power_domain(domain, domains)
		intel_display_power_put_unchecked(dev_priv, domain);
}

static void valleyview_crtc_enable(struct intel_atomic_state *state,
				   struct intel_crtc *crtc)
{
	const struct intel_crtc_state *new_crtc_state =
		intel_atomic_get_new_crtc_state(state, crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	enum pipe pipe = crtc->pipe;

	if (drm_WARN_ON(&dev_priv->drm, crtc->active))
		return;

	if (intel_crtc_has_dp_encoder(new_crtc_state))
		intel_dp_set_m_n(new_crtc_state, M1_N1);

	intel_set_pipe_timings(new_crtc_state);
	intel_set_pipe_src_size(new_crtc_state);

	if (IS_CHERRYVIEW(dev_priv) && pipe == PIPE_B) {
		intel_de_write(dev_priv, CHV_BLEND(pipe), CHV_BLEND_LEGACY);
		intel_de_write(dev_priv, CHV_CANVAS(pipe), 0);
	}

	i9xx_set_pipeconf(new_crtc_state);

	crtc->active = true;

	intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);

	intel_encoders_pre_pll_enable(state, crtc);

	if (IS_CHERRYVIEW(dev_priv)) {
		chv_prepare_pll(crtc, new_crtc_state);
		chv_enable_pll(crtc, new_crtc_state);
	} else {
		vlv_prepare_pll(crtc, new_crtc_state);
		vlv_enable_pll(crtc, new_crtc_state);
	}

	intel_encoders_pre_enable(state, crtc);

	i9xx_pfit_enable(new_crtc_state);

	intel_color_load_luts(new_crtc_state);
	intel_color_commit(new_crtc_state);
	/* update DSPCNTR to configure gamma for pipe bottom color */
	intel_disable_primary_plane(new_crtc_state);

	dev_priv->display.initial_watermarks(state, crtc);
	intel_enable_pipe(new_crtc_state);

	intel_crtc_vblank_on(new_crtc_state);

	intel_encoders_enable(state, crtc);
}

static void i9xx_set_pll_dividers(const struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);

	intel_de_write(dev_priv, FP0(crtc->pipe),
		       crtc_state->dpll_hw_state.fp0);
	intel_de_write(dev_priv, FP1(crtc->pipe),
		       crtc_state->dpll_hw_state.fp1);
}

static void i9xx_crtc_enable(struct intel_atomic_state *state,
			     struct intel_crtc *crtc)
{
	const struct intel_crtc_state *new_crtc_state =
		intel_atomic_get_new_crtc_state(state, crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	enum pipe pipe = crtc->pipe;

	if (drm_WARN_ON(&dev_priv->drm, crtc->active))
		return;

	i9xx_set_pll_dividers(new_crtc_state);

	if (intel_crtc_has_dp_encoder(new_crtc_state))
		intel_dp_set_m_n(new_crtc_state, M1_N1);

	intel_set_pipe_timings(new_crtc_state);
	intel_set_pipe_src_size(new_crtc_state);

	i9xx_set_pipeconf(new_crtc_state);

	crtc->active = true;

	if (!IS_GEN(dev_priv, 2))
		intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);

	intel_encoders_pre_enable(state, crtc);

	i9xx_enable_pll(crtc, new_crtc_state);

	i9xx_pfit_enable(new_crtc_state);

	intel_color_load_luts(new_crtc_state);
	intel_color_commit(new_crtc_state);
	/* update DSPCNTR to configure gamma for pipe bottom color */
	intel_disable_primary_plane(new_crtc_state);

	if (dev_priv->display.initial_watermarks)
		dev_priv->display.initial_watermarks(state, crtc);
	else
		intel_update_watermarks(crtc);
	intel_enable_pipe(new_crtc_state);

	intel_crtc_vblank_on(new_crtc_state);

	intel_encoders_enable(state, crtc);

	/* prevents spurious underruns */
	if (IS_GEN(dev_priv, 2))
		intel_wait_for_vblank(dev_priv, pipe);
}

static void i9xx_pfit_disable(const struct intel_crtc_state *old_crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);

	if (!old_crtc_state->gmch_pfit.control)
		return;

	assert_pipe_disabled(dev_priv, old_crtc_state->cpu_transcoder);

	drm_dbg_kms(&dev_priv->drm, "disabling pfit, current: 0x%08x\n",
		    intel_de_read(dev_priv, PFIT_CONTROL));
	intel_de_write(dev_priv, PFIT_CONTROL, 0);
}

static void i9xx_crtc_disable(struct intel_atomic_state *state,
			      struct intel_crtc *crtc)
{
	struct intel_crtc_state *old_crtc_state =
		intel_atomic_get_old_crtc_state(state, crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	enum pipe pipe = crtc->pipe;

	/*
	 * On gen2 planes are double buffered but the pipe isn't, so we must
	 * wait for planes to fully turn off before disabling the pipe.
	 */
	if (IS_GEN(dev_priv, 2))
		intel_wait_for_vblank(dev_priv, pipe);

	intel_encoders_disable(state, crtc);

	intel_crtc_vblank_off(old_crtc_state);

	intel_disable_pipe(old_crtc_state);

	i9xx_pfit_disable(old_crtc_state);

	intel_encoders_post_disable(state, crtc);

	if (!intel_crtc_has_type(old_crtc_state, INTEL_OUTPUT_DSI)) {
		if (IS_CHERRYVIEW(dev_priv))
			chv_disable_pll(dev_priv, pipe);
		else if (IS_VALLEYVIEW(dev_priv))
			vlv_disable_pll(dev_priv, pipe);
		else
			i9xx_disable_pll(old_crtc_state);
	}

	intel_encoders_post_pll_disable(state, crtc);

	if (!IS_GEN(dev_priv, 2))
		intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);

	if (!dev_priv->display.initial_watermarks)
		intel_update_watermarks(crtc);

	/* clock the pipe down to 640x480@60 to potentially save power */
	if (IS_I830(dev_priv))
		i830_enable_pipe(dev_priv, pipe);
}

static void intel_crtc_disable_noatomic(struct intel_crtc *crtc,
					struct drm_modeset_acquire_ctx *ctx)
{
	struct intel_encoder *encoder;
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	struct intel_bw_state *bw_state =
		to_intel_bw_state(dev_priv->bw_obj.state);
	struct intel_cdclk_state *cdclk_state =
		to_intel_cdclk_state(dev_priv->cdclk.obj.state);
	struct intel_dbuf_state *dbuf_state =
		to_intel_dbuf_state(dev_priv->dbuf.obj.state);
	struct intel_crtc_state *crtc_state =
		to_intel_crtc_state(crtc->base.state);
	enum intel_display_power_domain domain;
	struct intel_plane *plane;
	struct drm_atomic_state *state;
	struct intel_crtc_state *temp_crtc_state;
	enum pipe pipe = crtc->pipe;
	u64 domains;
	int ret;

	if (!crtc_state->hw.active)
		return;

	for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, plane) {
		const struct intel_plane_state *plane_state =
			to_intel_plane_state(plane->base.state);

		if (plane_state->uapi.visible)
			intel_plane_disable_noatomic(crtc, plane);
	}

	state = drm_atomic_state_alloc(&dev_priv->drm);
	if (!state) {
		drm_dbg_kms(&dev_priv->drm,
			    "failed to disable [CRTC:%d:%s], out of memory",
			    crtc->base.base.id, crtc->base.name);
		return;
	}

	state->acquire_ctx = ctx;

	/* Everything's already locked, -EDEADLK can't happen. */
	temp_crtc_state = intel_atomic_get_crtc_state(state, crtc);
	ret = drm_atomic_add_affected_connectors(state, &crtc->base);

	drm_WARN_ON(&dev_priv->drm, IS_ERR(temp_crtc_state) || ret);

	dev_priv->display.crtc_disable(to_intel_atomic_state(state), crtc);

	drm_atomic_state_put(state);

	drm_dbg_kms(&dev_priv->drm,
		    "[CRTC:%d:%s] hw state adjusted, was enabled, now disabled\n",
		    crtc->base.base.id, crtc->base.name);

	crtc->active = false;
	crtc->base.enabled = false;

	drm_WARN_ON(&dev_priv->drm,
		    drm_atomic_set_mode_for_crtc(&crtc_state->uapi, NULL) < 0);
	crtc_state->uapi.active = false;
	crtc_state->uapi.connector_mask = 0;
	crtc_state->uapi.encoder_mask = 0;
	intel_crtc_free_hw_state(crtc_state);
	memset(&crtc_state->hw, 0, sizeof(crtc_state->hw));

	for_each_encoder_on_crtc(&dev_priv->drm, &crtc->base, encoder)
		encoder->base.crtc = NULL;

	intel_fbc_disable(crtc);
	intel_update_watermarks(crtc);
	intel_disable_shared_dpll(crtc_state);

	domains = crtc->enabled_power_domains;
	for_each_power_domain(domain, domains)
		intel_display_power_put_unchecked(dev_priv, domain);
	crtc->enabled_power_domains = 0;

	dev_priv->active_pipes &= ~BIT(pipe);
	cdclk_state->min_cdclk[pipe] = 0;
	cdclk_state->min_voltage_level[pipe] = 0;
	cdclk_state->active_pipes &= ~BIT(pipe);

	dbuf_state->active_pipes &= ~BIT(pipe);

	bw_state->data_rate[pipe] = 0;
	bw_state->num_active_planes[pipe] = 0;
}

/*
 * turn all crtc's off, but do not adjust state
 * This has to be paired with a call to intel_modeset_setup_hw_state.
 */
int intel_display_suspend(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = to_i915(dev);
	struct drm_atomic_state *state;
	int ret;

	state = drm_atomic_helper_suspend(dev);
	ret = PTR_ERR_OR_ZERO(state);
	if (ret)
		drm_err(&dev_priv->drm, "Suspending crtc's failed with %i\n",
			ret);
	else
		dev_priv->modeset_restore_state = state;
	return ret;
}

void intel_encoder_destroy(struct drm_encoder *encoder)
{
	struct intel_encoder *intel_encoder = to_intel_encoder(encoder);

	drm_encoder_cleanup(encoder);
	kfree(intel_encoder);
}

/* Cross check the actual hw state with our own modeset state tracking (and it's
 * internal consistency). */
static void intel_connector_verify_state(struct intel_crtc_state *crtc_state,
					 struct drm_connector_state *conn_state)
{
	struct intel_connector *connector = to_intel_connector(conn_state->connector);
	struct drm_i915_private *i915 = to_i915(connector->base.dev);

	drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s]\n",
		    connector->base.base.id, connector->base.name);

	if (connector->get_hw_state(connector)) {
		struct intel_encoder *encoder = intel_attached_encoder(connector);

		I915_STATE_WARN(!crtc_state,
			 "connector enabled without attached crtc\n");

		if (!crtc_state)
			return;

		I915_STATE_WARN(!crtc_state->hw.active,
				"connector is active, but attached crtc isn't\n");

		if (!encoder || encoder->type == INTEL_OUTPUT_DP_MST)
			return;

		I915_STATE_WARN(conn_state->best_encoder != &encoder->base,
			"atomic encoder doesn't match attached encoder\n");

		I915_STATE_WARN(conn_state->crtc != encoder->base.crtc,
			"attached encoder crtc differs from connector crtc\n");
	} else {
		I915_STATE_WARN(crtc_state && crtc_state->hw.active,
				"attached crtc is active, but connector isn't\n");
		I915_STATE_WARN(!crtc_state && conn_state->best_encoder,
			"best encoder set without crtc!\n");
	}
}

static int pipe_required_fdi_lanes(struct intel_crtc_state *crtc_state)
{
	if (crtc_state->hw.enable && crtc_state->has_pch_encoder)
		return crtc_state->fdi_lanes;

	return 0;
}

static int ilk_check_fdi_lanes(struct drm_device *dev, enum pipe pipe,
			       struct intel_crtc_state *pipe_config)
{
	struct drm_i915_private *dev_priv = to_i915(dev);
	struct drm_atomic_state *state = pipe_config->uapi.state;
	struct intel_crtc *other_crtc;
	struct intel_crtc_state *other_crtc_state;

	drm_dbg_kms(&dev_priv->drm,
		    "checking fdi config on pipe %c, lanes %i\n",
		    pipe_name(pipe), pipe_config->fdi_lanes);
	if (pipe_config->fdi_lanes > 4) {
		drm_dbg_kms(&dev_priv->drm,
			    "invalid fdi lane config on pipe %c: %i lanes\n",
			    pipe_name(pipe), pipe_config->fdi_lanes);
		return -EINVAL;
	}

	if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
		if (pipe_config->fdi_lanes > 2) {
			drm_dbg_kms(&dev_priv->drm,
				    "only 2 lanes on haswell, required: %i lanes\n",
				    pipe_config->fdi_lanes);
			return -EINVAL;
		} else {
			return 0;
		}
	}

	if (INTEL_NUM_PIPES(dev_priv) == 2)
		return 0;

	/* Ivybridge 3 pipe is really complicated */
	switch (pipe) {
	case PIPE_A:
		return 0;
	case PIPE_B:
		if (pipe_config->fdi_lanes <= 2)
			return 0;

		other_crtc = intel_get_crtc_for_pipe(dev_priv, PIPE_C);
		other_crtc_state =
			intel_atomic_get_crtc_state(state, other_crtc);
		if (IS_ERR(other_crtc_state))
			return PTR_ERR(other_crtc_state);

		if (pipe_required_fdi_lanes(other_crtc_state) > 0) {
			drm_dbg_kms(&dev_priv->drm,
				    "invalid shared fdi lane config on pipe %c: %i lanes\n",
				    pipe_name(pipe), pipe_config->fdi_lanes);
			return -EINVAL;
		}
		return 0;
	case PIPE_C:
		if (pipe_config->fdi_lanes > 2) {
			drm_dbg_kms(&dev_priv->drm,
				    "only 2 lanes on pipe %c: required %i lanes\n",
				    pipe_name(pipe), pipe_config->fdi_lanes);
			return -EINVAL;
		}

		other_crtc = intel_get_crtc_for_pipe(dev_priv, PIPE_B);
		other_crtc_state =
			intel_atomic_get_crtc_state(state, other_crtc);
		if (IS_ERR(other_crtc_state))
			return PTR_ERR(other_crtc_state);

		if (pipe_required_fdi_lanes(other_crtc_state) > 2) {
			drm_dbg_kms(&dev_priv->drm,
				    "fdi link B uses too many lanes to enable link C\n");
			return -EINVAL;
		}
		return 0;
	default:
		BUG();
	}
}

#define RETRY 1
static int ilk_fdi_compute_config(struct intel_crtc *intel_crtc,
				  struct intel_crtc_state *pipe_config)
{
	struct drm_device *dev = intel_crtc->base.dev;
	struct drm_i915_private *i915 = to_i915(dev);
	const struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
	int lane, link_bw, fdi_dotclock, ret;
	bool needs_recompute = false;

retry:
	/* FDI is a binary signal running at ~2.7GHz, encoding
	 * each output octet as 10 bits. The actual frequency
	 * is stored as a divider into a 100MHz clock, and the
	 * mode pixel clock is stored in units of 1KHz.
	 * Hence the bw of each lane in terms of the mode signal
	 * is:
	 */
	link_bw = intel_fdi_link_freq(i915, pipe_config);

	fdi_dotclock = adjusted_mode->crtc_clock;

	lane = ilk_get_lanes_required(fdi_dotclock, link_bw,
				      pipe_config->pipe_bpp);

	pipe_config->fdi_lanes = lane;

	intel_link_compute_m_n(pipe_config->pipe_bpp, lane, fdi_dotclock,
			       link_bw, &pipe_config->fdi_m_n, false, false);

	ret = ilk_check_fdi_lanes(dev, intel_crtc->pipe, pipe_config);
	if (ret == -EDEADLK)
		return ret;

	if (ret == -EINVAL && pipe_config->pipe_bpp > 6*3) {
		pipe_config->pipe_bpp -= 2*3;
		drm_dbg_kms(&i915->drm,
			    "fdi link bw constraint, reducing pipe bpp to %i\n",
			    pipe_config->pipe_bpp);
		needs_recompute = true;
		pipe_config->bw_constrained = true;

		goto retry;
	}

	if (needs_recompute)
		return RETRY;

	return ret;
}

bool hsw_crtc_state_ips_capable(const struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);

	/* IPS only exists on ULT machines and is tied to pipe A. */
	if (!hsw_crtc_supports_ips(crtc))
		return false;

	if (!dev_priv->params.enable_ips)
		return false;

	if (crtc_state->pipe_bpp > 24)
		return false;

	/*
	 * We compare against max which means we must take
	 * the increased cdclk requirement into account when
	 * calculating the new cdclk.
	 *
	 * Should measure whether using a lower cdclk w/o IPS
	 */
	if (IS_BROADWELL(dev_priv) &&
	    crtc_state->pixel_rate > dev_priv->max_cdclk_freq * 95 / 100)
		return false;

	return true;
}

static int hsw_compute_ips_config(struct intel_crtc_state *crtc_state)
{
	struct drm_i915_private *dev_priv =
		to_i915(crtc_state->uapi.crtc->dev);
	struct intel_atomic_state *state =
		to_intel_atomic_state(crtc_state->uapi.state);

	crtc_state->ips_enabled = false;

	if (!hsw_crtc_state_ips_capable(crtc_state))
		return 0;

	/*
	 * When IPS gets enabled, the pipe CRC changes. Since IPS gets
	 * enabled and disabled dynamically based on package C states,
	 * user space can't make reliable use of the CRCs, so let's just
	 * completely disable it.
	 */
	if (crtc_state->crc_enabled)
		return 0;

	/* IPS should be fine as long as at least one plane is enabled. */
	if (!(crtc_state->active_planes & ~BIT(PLANE_CURSOR)))
		return 0;

	if (IS_BROADWELL(dev_priv)) {
		const struct intel_cdclk_state *cdclk_state;

		cdclk_state = intel_atomic_get_cdclk_state(state);
		if (IS_ERR(cdclk_state))
			return PTR_ERR(cdclk_state);

		/* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
		if (crtc_state->pixel_rate > cdclk_state->logical.cdclk * 95 / 100)
			return 0;
	}

	crtc_state->ips_enabled = true;

	return 0;
}

static bool intel_crtc_supports_double_wide(const struct intel_crtc *crtc)
{
	const struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);

	/* GDG double wide on either pipe, otherwise pipe A only */
	return INTEL_GEN(dev_priv) < 4 &&
		(crtc->pipe == PIPE_A || IS_I915G(dev_priv));
}

static u32 ilk_pipe_pixel_rate(const struct intel_crtc_state *crtc_state)
{
	u32 pixel_rate = crtc_state->hw.adjusted_mode.crtc_clock;
	unsigned int pipe_w, pipe_h, pfit_w, pfit_h;

	/*
	 * We only use IF-ID interlacing. If we ever use
	 * PF-ID we'll need to adjust the pixel_rate here.
	 */

	if (!crtc_state->pch_pfit.enabled)
		return pixel_rate;

	pipe_w = crtc_state->pipe_src_w;
	pipe_h = crtc_state->pipe_src_h;

	pfit_w = drm_rect_width(&crtc_state->pch_pfit.dst);
	pfit_h = drm_rect_height(&crtc_state->pch_pfit.dst);

	if (pipe_w < pfit_w)
		pipe_w = pfit_w;
	if (pipe_h < pfit_h)
		pipe_h = pfit_h;

	if (drm_WARN_ON(crtc_state->uapi.crtc->dev,
			!pfit_w || !pfit_h))
		return pixel_rate;

	return div_u64(mul_u32_u32(pixel_rate, pipe_w * pipe_h),
		       pfit_w * pfit_h);
}

static void intel_crtc_compute_pixel_rate(struct intel_crtc_state *crtc_state)
{
	struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);

	if (HAS_GMCH(dev_priv))
		/* FIXME calculate proper pipe pixel rate for GMCH pfit */
		crtc_state->pixel_rate =
			crtc_state->hw.adjusted_mode.crtc_clock;
	else
		crtc_state->pixel_rate =
			ilk_pipe_pixel_rate(crtc_state);
}

static int intel_crtc_compute_config(struct intel_crtc *crtc,
				     struct intel_crtc_state *pipe_config)
{
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	const struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
	int clock_limit = dev_priv->max_dotclk_freq;

	if (INTEL_GEN(dev_priv) < 4) {
		clock_limit = dev_priv->max_cdclk_freq * 9 / 10;

		/*
		 * Enable double wide mode when the dot clock
		 * is > 90% of the (display) core speed.
		 */
		if (intel_crtc_supports_double_wide(crtc) &&
		    adjusted_mode->crtc_clock > clock_limit) {
			clock_limit = dev_priv->max_dotclk_freq;
			pipe_config->double_wide = true;
		}
	}

	if (adjusted_mode->crtc_clock > clock_limit) {
		drm_dbg_kms(&dev_priv->drm,
			    "requested pixel clock (%d kHz) too high (max: %d kHz, double wide: %s)\n",
			    adjusted_mode->crtc_clock, clock_limit,
			    yesno(pipe_config->double_wide));
		return -EINVAL;
	}

	if ((pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 ||
	     pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR444) &&
	     pipe_config->hw.ctm) {
		/*
		 * There is only one pipe CSC unit per pipe, and we need that
		 * for output conversion from RGB->YCBCR. So if CTM is already
		 * applied we can't support YCBCR420 output.
		 */
		drm_dbg_kms(&dev_priv->drm,
			    "YCBCR420 and CTM together are not possible\n");
		return -EINVAL;
	}

	/*
	 * Pipe horizontal size must be even in:
	 * - DVO ganged mode
	 * - LVDS dual channel mode
	 * - Double wide pipe
	 */
	if (pipe_config->pipe_src_w & 1) {
		if (pipe_config->double_wide) {
			drm_dbg_kms(&dev_priv->drm,
				    "Odd pipe source width not supported with double wide pipe\n");
			return -EINVAL;
		}

		if (intel_crtc_has_type(pipe_config, INTEL_OUTPUT_LVDS) &&
		    intel_is_dual_link_lvds(dev_priv)) {
			drm_dbg_kms(&dev_priv->drm,
				    "Odd pipe source width not supported with dual link LVDS\n");
			return -EINVAL;
		}
	}

	/* Cantiga+ cannot handle modes with a hsync front porch of 0.
	 * WaPruneModeWithIncorrectHsyncOffset:ctg,elk,ilk,snb,ivb,vlv,hsw.
	 */
	if ((INTEL_GEN(dev_priv) > 4 || IS_G4X(dev_priv)) &&
		adjusted_mode->crtc_hsync_start == adjusted_mode->crtc_hdisplay)
		return -EINVAL;

	intel_crtc_compute_pixel_rate(pipe_config);

	if (pipe_config->has_pch_encoder)
		return ilk_fdi_compute_config(crtc, pipe_config);

	return 0;
}

static void
intel_reduce_m_n_ratio(u32 *num, u32 *den)
{
	while (*num > DATA_LINK_M_N_MASK ||
	       *den > DATA_LINK_M_N_MASK) {
		*num >>= 1;
		*den >>= 1;
	}
}

static void compute_m_n(unsigned int m, unsigned int n,
			u32 *ret_m, u32 *ret_n,
			bool constant_n)
{
	/*
	 * Several DP dongles in particular seem to be fussy about
	 * too large link M/N values. Give N value as 0x8000 that
	 * should be acceptable by specific devices. 0x8000 is the
	 * specified fixed N value for asynchronous clock mode,
	 * which the devices expect also in synchronous clock mode.
	 */
	if (constant_n)
		*ret_n = DP_LINK_CONSTANT_N_VALUE;
	else
		*ret_n = min_t(unsigned int, roundup_pow_of_two(n), DATA_LINK_N_MAX);

	*ret_m = div_u64(mul_u32_u32(m, *ret_n), n);
	intel_reduce_m_n_ratio(ret_m, ret_n);
}

void
intel_link_compute_m_n(u16 bits_per_pixel, int nlanes,
		       int pixel_clock, int link_clock,
		       struct intel_link_m_n *m_n,
		       bool constant_n, bool fec_enable)
{
	u32 data_clock = bits_per_pixel * pixel_clock;

	if (fec_enable)
		data_clock = intel_dp_mode_to_fec_clock(data_clock);

	m_n->tu = 64;
	compute_m_n(data_clock,
		    link_clock * nlanes * 8,
		    &m_n->gmch_m, &m_n->gmch_n,
		    constant_n);

	compute_m_n(pixel_clock, link_clock,
		    &m_n->link_m, &m_n->link_n,
		    constant_n);
}

static void intel_panel_sanitize_ssc(struct drm_i915_private *dev_priv)
{
	/*
	 * There may be no VBT; and if the BIOS enabled SSC we can
	 * just keep using it to avoid unnecessary flicker.  Whereas if the
	 * BIOS isn't using it, don't assume it will work even if the VBT
	 * indicates as much.
	 */
	if (HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv)) {
		bool bios_lvds_use_ssc = intel_de_read(dev_priv,
						       PCH_DREF_CONTROL) &
			DREF_SSC1_ENABLE;

		if (dev_priv->vbt.lvds_use_ssc != bios_lvds_use_ssc) {
			drm_dbg_kms(&dev_priv->drm,
				    "SSC %s by BIOS, overriding VBT which says %s\n",
				    enableddisabled(bios_lvds_use_ssc),
				    enableddisabled(dev_priv->vbt.lvds_use_ssc));
			dev_priv->vbt.lvds_use_ssc = bios_lvds_use_ssc;
		}
	}
}

static bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
{
	if (dev_priv->params.panel_use_ssc >= 0)
		return dev_priv->params.panel_use_ssc != 0;
	return dev_priv->vbt.lvds_use_ssc
		&& !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
}

static u32 pnv_dpll_compute_fp(struct dpll *dpll)
{
	return (1 << dpll->n) << 16 | dpll->m2;
}

static u32 i9xx_dpll_compute_fp(struct dpll *dpll)
{
	return dpll->n << 16 | dpll->m1 << 8 | dpll->m2;
}

static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
				     struct intel_crtc_state *crtc_state,
				     struct dpll *reduced_clock)
{
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	u32 fp, fp2 = 0;

	if (IS_PINEVIEW(dev_priv)) {
		fp = pnv_dpll_compute_fp(&crtc_state->dpll);
		if (reduced_clock)
			fp2 = pnv_dpll_compute_fp(reduced_clock);
	} else {
		fp = i9xx_dpll_compute_fp(&crtc_state->dpll);
		if (reduced_clock)
			fp2 = i9xx_dpll_compute_fp(reduced_clock);
	}

	crtc_state->dpll_hw_state.fp0 = fp;

	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) &&
	    reduced_clock) {
		crtc_state->dpll_hw_state.fp1 = fp2;
	} else {
		crtc_state->dpll_hw_state.fp1 = fp;
	}
}

static void vlv_pllb_recal_opamp(struct drm_i915_private *dev_priv, enum pipe
		pipe)
{
	u32 reg_val;

	/*
	 * PLLB opamp always calibrates to max value of 0x3f, force enable it
	 * and set it to a reasonable value instead.
	 */
	reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1));
	reg_val &= 0xffffff00;
	reg_val |= 0x00000030;
	vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val);

	reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13);
	reg_val &= 0x00ffffff;
	reg_val |= 0x8c000000;
	vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val);

	reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1));
	reg_val &= 0xffffff00;
	vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val);

	reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13);
	reg_val &= 0x00ffffff;
	reg_val |= 0xb0000000;
	vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val);
}

static void intel_pch_transcoder_set_m_n(const struct intel_crtc_state *crtc_state,
					 const struct intel_link_m_n *m_n)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	enum pipe pipe = crtc->pipe;

	intel_de_write(dev_priv, PCH_TRANS_DATA_M1(pipe),
		       TU_SIZE(m_n->tu) | m_n->gmch_m);
	intel_de_write(dev_priv, PCH_TRANS_DATA_N1(pipe), m_n->gmch_n);
	intel_de_write(dev_priv, PCH_TRANS_LINK_M1(pipe), m_n->link_m);
	intel_de_write(dev_priv, PCH_TRANS_LINK_N1(pipe), m_n->link_n);
}

static bool transcoder_has_m2_n2(struct drm_i915_private *dev_priv,
				 enum transcoder transcoder)
{
	if (IS_HASWELL(dev_priv))
		return transcoder == TRANSCODER_EDP;

	/*
	 * Strictly speaking some registers are available before
	 * gen7, but we only support DRRS on gen7+
	 */
	return IS_GEN(dev_priv, 7) || IS_CHERRYVIEW(dev_priv);
}

static void intel_cpu_transcoder_set_m_n(const struct intel_crtc_state *crtc_state,
					 const struct intel_link_m_n *m_n,
					 const struct intel_link_m_n *m2_n2)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	enum pipe pipe = crtc->pipe;
	enum transcoder transcoder = crtc_state->cpu_transcoder;

	if (INTEL_GEN(dev_priv) >= 5) {
		intel_de_write(dev_priv, PIPE_DATA_M1(transcoder),
			       TU_SIZE(m_n->tu) | m_n->gmch_m);
		intel_de_write(dev_priv, PIPE_DATA_N1(transcoder),
			       m_n->gmch_n);
		intel_de_write(dev_priv, PIPE_LINK_M1(transcoder),
			       m_n->link_m);
		intel_de_write(dev_priv, PIPE_LINK_N1(transcoder),
			       m_n->link_n);
		/*
		 *  M2_N2 registers are set only if DRRS is supported
		 * (to make sure the registers are not unnecessarily accessed).
		 */
		if (m2_n2 && crtc_state->has_drrs &&
		    transcoder_has_m2_n2(dev_priv, transcoder)) {
			intel_de_write(dev_priv, PIPE_DATA_M2(transcoder),
				       TU_SIZE(m2_n2->tu) | m2_n2->gmch_m);
			intel_de_write(dev_priv, PIPE_DATA_N2(transcoder),
				       m2_n2->gmch_n);
			intel_de_write(dev_priv, PIPE_LINK_M2(transcoder),
				       m2_n2->link_m);
			intel_de_write(dev_priv, PIPE_LINK_N2(transcoder),
				       m2_n2->link_n);
		}
	} else {
		intel_de_write(dev_priv, PIPE_DATA_M_G4X(pipe),
			       TU_SIZE(m_n->tu) | m_n->gmch_m);
		intel_de_write(dev_priv, PIPE_DATA_N_G4X(pipe), m_n->gmch_n);
		intel_de_write(dev_priv, PIPE_LINK_M_G4X(pipe), m_n->link_m);
		intel_de_write(dev_priv, PIPE_LINK_N_G4X(pipe), m_n->link_n);
	}
}

void intel_dp_set_m_n(const struct intel_crtc_state *crtc_state, enum link_m_n_set m_n)
{
	const struct intel_link_m_n *dp_m_n, *dp_m2_n2 = NULL;
	struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev);

	if (m_n == M1_N1) {
		dp_m_n = &crtc_state->dp_m_n;
		dp_m2_n2 = &crtc_state->dp_m2_n2;
	} else if (m_n == M2_N2) {

		/*
		 * M2_N2 registers are not supported. Hence m2_n2 divider value
		 * needs to be programmed into M1_N1.
		 */
		dp_m_n = &crtc_state->dp_m2_n2;
	} else {
		drm_err(&i915->drm, "Unsupported divider value\n");
		return;
	}

	if (crtc_state->has_pch_encoder)
		intel_pch_transcoder_set_m_n(crtc_state, &crtc_state->dp_m_n);
	else
		intel_cpu_transcoder_set_m_n(crtc_state, dp_m_n, dp_m2_n2);
}

static void vlv_compute_dpll(struct intel_crtc *crtc,
			     struct intel_crtc_state *pipe_config)
{
	pipe_config->dpll_hw_state.dpll = DPLL_INTEGRATED_REF_CLK_VLV |
		DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
	if (crtc->pipe != PIPE_A)
		pipe_config->dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;

	/* DPLL not used with DSI, but still need the rest set up */
	if (!intel_crtc_has_type(pipe_config, INTEL_OUTPUT_DSI))
		pipe_config->dpll_hw_state.dpll |= DPLL_VCO_ENABLE |
			DPLL_EXT_BUFFER_ENABLE_VLV;

	pipe_config->dpll_hw_state.dpll_md =
		(pipe_config->pixel_multiplier - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
}

static void chv_compute_dpll(struct intel_crtc *crtc,
			     struct intel_crtc_state *pipe_config)
{
	pipe_config->dpll_hw_state.dpll = DPLL_SSC_REF_CLK_CHV |
		DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
	if (crtc->pipe != PIPE_A)
		pipe_config->dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;

	/* DPLL not used with DSI, but still need the rest set up */
	if (!intel_crtc_has_type(pipe_config, INTEL_OUTPUT_DSI))
		pipe_config->dpll_hw_state.dpll |= DPLL_VCO_ENABLE;

	pipe_config->dpll_hw_state.dpll_md =
		(pipe_config->pixel_multiplier - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
}

static void vlv_prepare_pll(struct intel_crtc *crtc,
			    const struct intel_crtc_state *pipe_config)
{
	struct drm_device *dev = crtc->base.dev;
	struct drm_i915_private *dev_priv = to_i915(dev);
	enum pipe pipe = crtc->pipe;
	u32 mdiv;
	u32 bestn, bestm1, bestm2, bestp1, bestp2;
	u32 coreclk, reg_val;

	/* Enable Refclk */
	intel_de_write(dev_priv, DPLL(pipe),
		       pipe_config->dpll_hw_state.dpll & ~(DPLL_VCO_ENABLE | DPLL_EXT_BUFFER_ENABLE_VLV));

	/* No need to actually set up the DPLL with DSI */
	if ((pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) == 0)
		return;

	vlv_dpio_get(dev_priv);

	bestn = pipe_config->dpll.n;
	bestm1 = pipe_config->dpll.m1;
	bestm2 = pipe_config->dpll.m2;
	bestp1 = pipe_config->dpll.p1;
	bestp2 = pipe_config->dpll.p2;

	/* See eDP HDMI DPIO driver vbios notes doc */

	/* PLL B needs special handling */
	if (pipe == PIPE_B)
		vlv_pllb_recal_opamp(dev_priv, pipe);

	/* Set up Tx target for periodic Rcomp update */
	vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9_BCAST, 0x0100000f);

	/* Disable target IRef on PLL */
	reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW8(pipe));
	reg_val &= 0x00ffffff;
	vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW8(pipe), reg_val);

	/* Disable fast lock */
	vlv_dpio_write(dev_priv, pipe, VLV_CMN_DW0, 0x610);

	/* Set idtafcrecal before PLL is enabled */
	mdiv = ((bestm1 << DPIO_M1DIV_SHIFT) | (bestm2 & DPIO_M2DIV_MASK));
	mdiv |= ((bestp1 << DPIO_P1_SHIFT) | (bestp2 << DPIO_P2_SHIFT));
	mdiv |= ((bestn << DPIO_N_SHIFT));
	mdiv |= (1 << DPIO_K_SHIFT);

	/*
	 * Post divider depends on pixel clock rate, DAC vs digital (and LVDS,
	 * but we don't support that).
	 * Note: don't use the DAC post divider as it seems unstable.
	 */
	mdiv |= (DPIO_POST_DIV_HDMIDP << DPIO_POST_DIV_SHIFT);
	vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv);

	mdiv |= DPIO_ENABLE_CALIBRATION;
	vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv);

	/* Set HBR and RBR LPF coefficients */
	if (pipe_config->port_clock == 162000 ||
	    intel_crtc_has_type(pipe_config, INTEL_OUTPUT_ANALOG) ||
	    intel_crtc_has_type(pipe_config, INTEL_OUTPUT_HDMI))
		vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe),
				 0x009f0003);
	else
		vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe),
				 0x00d0000f);

	if (intel_crtc_has_dp_encoder(pipe_config)) {
		/* Use SSC source */
		if (pipe == PIPE_A)
			vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
					 0x0df40000);
		else
			vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
					 0x0df70000);
	} else { /* HDMI or VGA */
		/* Use bend source */
		if (pipe == PIPE_A)
			vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
					 0x0df70000);
		else
			vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
					 0x0df40000);
	}

	coreclk = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW7(pipe));
	coreclk = (coreclk & 0x0000ff00) | 0x01c00000;
	if (intel_crtc_has_dp_encoder(pipe_config))
		coreclk |= 0x01000000;
	vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW7(pipe), coreclk);

	vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW11(pipe), 0x87871000);

	vlv_dpio_put(dev_priv);
}

static void chv_prepare_pll(struct intel_crtc *crtc,
			    const struct intel_crtc_state *pipe_config)
{
	struct drm_device *dev = crtc->base.dev;
	struct drm_i915_private *dev_priv = to_i915(dev);
	enum pipe pipe = crtc->pipe;
	enum dpio_channel port = vlv_pipe_to_channel(pipe);
	u32 loopfilter, tribuf_calcntr;
	u32 bestn, bestm1, bestm2, bestp1, bestp2, bestm2_frac;
	u32 dpio_val;
	int vco;

	/* Enable Refclk and SSC */
	intel_de_write(dev_priv, DPLL(pipe),
		       pipe_config->dpll_hw_state.dpll & ~DPLL_VCO_ENABLE);

	/* No need to actually set up the DPLL with DSI */
	if ((pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) == 0)
		return;

	bestn = pipe_config->dpll.n;
	bestm2_frac = pipe_config->dpll.m2 & 0x3fffff;
	bestm1 = pipe_config->dpll.m1;
	bestm2 = pipe_config->dpll.m2 >> 22;
	bestp1 = pipe_config->dpll.p1;
	bestp2 = pipe_config->dpll.p2;
	vco = pipe_config->dpll.vco;
	dpio_val = 0;
	loopfilter = 0;

	vlv_dpio_get(dev_priv);

	/* p1 and p2 divider */
	vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW13(port),
			5 << DPIO_CHV_S1_DIV_SHIFT |
			bestp1 << DPIO_CHV_P1_DIV_SHIFT |
			bestp2 << DPIO_CHV_P2_DIV_SHIFT |
			1 << DPIO_CHV_K_DIV_SHIFT);

	/* Feedback post-divider - m2 */
	vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW0(port), bestm2);

	/* Feedback refclk divider - n and m1 */
	vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW1(port),
			DPIO_CHV_M1_DIV_BY_2 |
			1 << DPIO_CHV_N_DIV_SHIFT);

	/* M2 fraction division */
	vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW2(port), bestm2_frac);

	/* M2 fraction division enable */
	dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW3(port));
	dpio_val &= ~(DPIO_CHV_FEEDFWD_GAIN_MASK | DPIO_CHV_FRAC_DIV_EN);
	dpio_val |= (2 << DPIO_CHV_FEEDFWD_GAIN_SHIFT);
	if (bestm2_frac)
		dpio_val |= DPIO_CHV_FRAC_DIV_EN;
	vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW3(port), dpio_val);

	/* Program digital lock detect threshold */
	dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW9(port));
	dpio_val &= ~(DPIO_CHV_INT_LOCK_THRESHOLD_MASK |
					DPIO_CHV_INT_LOCK_THRESHOLD_SEL_COARSE);
	dpio_val |= (0x5 << DPIO_CHV_INT_LOCK_THRESHOLD_SHIFT);
	if (!bestm2_frac)
		dpio_val |= DPIO_CHV_INT_LOCK_THRESHOLD_SEL_COARSE;
	vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW9(port), dpio_val);

	/* Loop filter */
	if (vco == 5400000) {
		loopfilter |= (0x3 << DPIO_CHV_PROP_COEFF_SHIFT);
		loopfilter |= (0x8 << DPIO_CHV_INT_COEFF_SHIFT);
		loopfilter |= (0x1 << DPIO_CHV_GAIN_CTRL_SHIFT);
		tribuf_calcntr = 0x9;
	} else if (vco <= 6200000) {
		loopfilter |= (0x5 << DPIO_CHV_PROP_COEFF_SHIFT);
		loopfilter |= (0xB << DPIO_CHV_INT_COEFF_SHIFT);
		loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT);
		tribuf_calcntr = 0x9;
	} else if (vco <= 6480000) {
		loopfilter |= (0x4 << DPIO_CHV_PROP_COEFF_SHIFT);
		loopfilter |= (0x9 << DPIO_CHV_INT_COEFF_SHIFT);
		loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT);
		tribuf_calcntr = 0x8;
	} else {
		/* Not supported. Apply the same limits as in the max case */
		loopfilter |= (0x4 << DPIO_CHV_PROP_COEFF_SHIFT);
		loopfilter |= (0x9 << DPIO_CHV_INT_COEFF_SHIFT);
		loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT);
		tribuf_calcntr = 0;
	}
	vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW6(port), loopfilter);

	dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW8(port));
	dpio_val &= ~DPIO_CHV_TDC_TARGET_CNT_MASK;
	dpio_val |= (tribuf_calcntr << DPIO_CHV_TDC_TARGET_CNT_SHIFT);
	vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW8(port), dpio_val);

	/* AFC Recal */
	vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port),
			vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port)) |
			DPIO_AFC_RECAL);

	vlv_dpio_put(dev_priv);
}

/**
 * vlv_force_pll_on - forcibly enable just the PLL
 * @dev_priv: i915 private structure
 * @pipe: pipe PLL to enable
 * @dpll: PLL configuration
 *
 * Enable the PLL for @pipe using the supplied @dpll config. To be used
 * in cases where we need the PLL enabled even when @pipe is not going to
 * be enabled.
 */
int vlv_force_pll_on(struct drm_i915_private *dev_priv, enum pipe pipe,
		     const struct dpll *dpll)
{
	struct intel_crtc *crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
	struct intel_crtc_state *pipe_config;

	pipe_config = intel_crtc_state_alloc(crtc);
	if (!pipe_config)
		return -ENOMEM;

	pipe_config->cpu_transcoder = (enum transcoder)pipe;
	pipe_config->pixel_multiplier = 1;
	pipe_config->dpll = *dpll;

	if (IS_CHERRYVIEW(dev_priv)) {
		chv_compute_dpll(crtc, pipe_config);
		chv_prepare_pll(crtc, pipe_config);
		chv_enable_pll(crtc, pipe_config);
	} else {
		vlv_compute_dpll(crtc, pipe_config);
		vlv_prepare_pll(crtc, pipe_config);
		vlv_enable_pll(crtc, pipe_config);
	}

	kfree(pipe_config);

	return 0;
}

/**
 * vlv_force_pll_off - forcibly disable just the PLL
 * @dev_priv: i915 private structure
 * @pipe: pipe PLL to disable
 *
 * Disable the PLL for @pipe. To be used in cases where we need
 * the PLL enabled even when @pipe is not going to be enabled.
 */
void vlv_force_pll_off(struct drm_i915_private *dev_priv, enum pipe pipe)
{
	if (IS_CHERRYVIEW(dev_priv))
		chv_disable_pll(dev_priv, pipe);
	else
		vlv_disable_pll(dev_priv, pipe);
}

static void i9xx_compute_dpll(struct intel_crtc *crtc,
			      struct intel_crtc_state *crtc_state,
			      struct dpll *reduced_clock)
{
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	u32 dpll;
	struct dpll *clock = &crtc_state->dpll;

	i9xx_update_pll_dividers(crtc, crtc_state, reduced_clock);

	dpll = DPLL_VGA_MODE_DIS;

	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS))
		dpll |= DPLLB_MODE_LVDS;
	else
		dpll |= DPLLB_MODE_DAC_SERIAL;

	if (IS_I945G(dev_priv) || IS_I945GM(dev_priv) ||
	    IS_G33(dev_priv) || IS_PINEVIEW(dev_priv)) {
		dpll |= (crtc_state->pixel_multiplier - 1)
			<< SDVO_MULTIPLIER_SHIFT_HIRES;
	}

	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO) ||
	    intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI))
		dpll |= DPLL_SDVO_HIGH_SPEED;

	if (intel_crtc_has_dp_encoder(crtc_state))
		dpll |= DPLL_SDVO_HIGH_SPEED;

	/* compute bitmask from p1 value */
	if (IS_PINEVIEW(dev_priv))
		dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
	else {
		dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
		if (IS_G4X(dev_priv) && reduced_clock)
			dpll |= (1 << (reduced_clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
	}
	switch (clock->p2) {
	case 5:
		dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
		break;
	case 7:
		dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
		break;
	case 10:
		dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
		break;
	case 14:
		dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
		break;
	}
	if (INTEL_GEN(dev_priv) >= 4)
		dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);

	if (crtc_state->sdvo_tv_clock)
		dpll |= PLL_REF_INPUT_TVCLKINBC;
	else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) &&
		 intel_panel_use_ssc(dev_priv))
		dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
	else
		dpll |= PLL_REF_INPUT_DREFCLK;

	dpll |= DPLL_VCO_ENABLE;
	crtc_state->dpll_hw_state.dpll = dpll;

	if (INTEL_GEN(dev_priv) >= 4) {
		u32 dpll_md = (crtc_state->pixel_multiplier - 1)
			<< DPLL_MD_UDI_MULTIPLIER_SHIFT;
		crtc_state->dpll_hw_state.dpll_md = dpll_md;
	}
}

static void i8xx_compute_dpll(struct intel_crtc *crtc,
			      struct intel_crtc_state *crtc_state,
			      struct dpll *reduced_clock)
{
	struct drm_device *dev = crtc->base.dev;
	struct drm_i915_private *dev_priv = to_i915(dev);
	u32 dpll;
	struct dpll *clock = &crtc_state->dpll;

	i9xx_update_pll_dividers(crtc, crtc_state, reduced_clock);

	dpll = DPLL_VGA_MODE_DIS;

	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
		dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
	} else {
		if (clock->p1 == 2)
			dpll |= PLL_P1_DIVIDE_BY_TWO;
		else
			dpll |= (clock->p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
		if (clock->p2 == 4)
			dpll |= PLL_P2_DIVIDE_BY_4;
	}

	/*
	 * Bspec:
	 * "[Almador Errata}: For the correct operation of the muxed DVO pins
	 *  (GDEVSELB/I2Cdata, GIRDBY/I2CClk) and (GFRAMEB/DVI_Data,
	 *  GTRDYB/DVI_Clk): Bit 31 (DPLL VCO Enable) and Bit 30 (2X Clock
	 *  Enable) must be set to “1” in both the DPLL A Control Register
	 *  (06014h-06017h) and DPLL B Control Register (06018h-0601Bh)."
	 *
	 * For simplicity We simply keep both bits always enabled in
	 * both DPLLS. The spec says we should disable the DVO 2X clock
	 * when not needed, but this seems to work fine in practice.
	 */
	if (IS_I830(dev_priv) ||
	    intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DVO))
		dpll |= DPLL_DVO_2X_MODE;

	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) &&
	    intel_panel_use_ssc(dev_priv))
		dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
	else
		dpll |= PLL_REF_INPUT_DREFCLK;

	dpll |= DPLL_VCO_ENABLE;
	crtc_state->dpll_hw_state.dpll = dpll;
}

static void intel_set_pipe_timings(const struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	enum pipe pipe = crtc->pipe;
	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
	const struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode;
	u32 crtc_vtotal, crtc_vblank_end;
	int vsyncshift = 0;

	/* We need to be careful not to changed the adjusted mode, for otherwise
	 * the hw state checker will get angry at the mismatch. */
	crtc_vtotal = adjusted_mode->crtc_vtotal;
	crtc_vblank_end = adjusted_mode->crtc_vblank_end;

	if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
		/* the chip adds 2 halflines automatically */
		crtc_vtotal -= 1;
		crtc_vblank_end -= 1;

		if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO))
			vsyncshift = (adjusted_mode->crtc_htotal - 1) / 2;
		else
			vsyncshift = adjusted_mode->crtc_hsync_start -
				adjusted_mode->crtc_htotal / 2;
		if (vsyncshift < 0)
			vsyncshift += adjusted_mode->crtc_htotal;
	}

	if (INTEL_GEN(dev_priv) > 3)
		intel_de_write(dev_priv, VSYNCSHIFT(cpu_transcoder),
		               vsyncshift);

	intel_de_write(dev_priv, HTOTAL(cpu_transcoder),
		       (adjusted_mode->crtc_hdisplay - 1) | ((adjusted_mode->crtc_htotal - 1) << 16));
	intel_de_write(dev_priv, HBLANK(cpu_transcoder),
		       (adjusted_mode->crtc_hblank_start - 1) | ((adjusted_mode->crtc_hblank_end - 1) << 16));
	intel_de_write(dev_priv, HSYNC(cpu_transcoder),
		       (adjusted_mode->crtc_hsync_start - 1) | ((adjusted_mode->crtc_hsync_end - 1) << 16));

	intel_de_write(dev_priv, VTOTAL(cpu_transcoder),
		       (adjusted_mode->crtc_vdisplay - 1) | ((crtc_vtotal - 1) << 16));
	intel_de_write(dev_priv, VBLANK(cpu_transcoder),
		       (adjusted_mode->crtc_vblank_start - 1) | ((crtc_vblank_end - 1) << 16));
	intel_de_write(dev_priv, VSYNC(cpu_transcoder),
		       (adjusted_mode->crtc_vsync_start - 1) | ((adjusted_mode->crtc_vsync_end - 1) << 16));

	/* Workaround: when the EDP input selection is B, the VTOTAL_B must be
	 * programmed with the VTOTAL_EDP value. Same for VTOTAL_C. This is
	 * documented on the DDI_FUNC_CTL register description, EDP Input Select
	 * bits. */
	if (IS_HASWELL(dev_priv) && cpu_transcoder == TRANSCODER_EDP &&
	    (pipe == PIPE_B || pipe == PIPE_C))
		intel_de_write(dev_priv, VTOTAL(pipe),
		               intel_de_read(dev_priv, VTOTAL(cpu_transcoder)));

}

static void intel_set_pipe_src_size(const struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	enum pipe pipe = crtc->pipe;

	/* pipesrc controls the size that is scaled from, which should
	 * always be the user's requested size.
	 */
	intel_de_write(dev_priv, PIPESRC(pipe),
		       ((crtc_state->pipe_src_w - 1) << 16) | (crtc_state->pipe_src_h - 1));
}

static bool intel_pipe_is_interlaced(const struct intel_crtc_state *crtc_state)
{
	struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);
	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;

	if (IS_GEN(dev_priv, 2))
		return false;

	if (INTEL_GEN(dev_priv) >= 9 ||
	    IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv))
		return intel_de_read(dev_priv, PIPECONF(cpu_transcoder)) & PIPECONF_INTERLACE_MASK_HSW;
	else
		return intel_de_read(dev_priv, PIPECONF(cpu_transcoder)) & PIPECONF_INTERLACE_MASK;
}

static void intel_get_pipe_timings(struct intel_crtc *crtc,
				   struct intel_crtc_state *pipe_config)
{
	struct drm_device *dev = crtc->base.dev;
	struct drm_i915_private *dev_priv = to_i915(dev);
	enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
	u32 tmp;

	tmp = intel_de_read(dev_priv, HTOTAL(cpu_transcoder));
	pipe_config->hw.adjusted_mode.crtc_hdisplay = (tmp & 0xffff) + 1;
	pipe_config->hw.adjusted_mode.crtc_htotal = ((tmp >> 16) & 0xffff) + 1;

	if (!transcoder_is_dsi(cpu_transcoder)) {
		tmp = intel_de_read(dev_priv, HBLANK(cpu_transcoder));
		pipe_config->hw.adjusted_mode.crtc_hblank_start =
							(tmp & 0xffff) + 1;
		pipe_config->hw.adjusted_mode.crtc_hblank_end =
						((tmp >> 16) & 0xffff) + 1;
	}
	tmp = intel_de_read(dev_priv, HSYNC(cpu_transcoder));
	pipe_config->hw.adjusted_mode.crtc_hsync_start = (tmp & 0xffff) + 1;
	pipe_config->hw.adjusted_mode.crtc_hsync_end = ((tmp >> 16) & 0xffff) + 1;

	tmp = intel_de_read(dev_priv, VTOTAL(cpu_transcoder));
	pipe_config->hw.adjusted_mode.crtc_vdisplay = (tmp & 0xffff) + 1;
	pipe_config->hw.adjusted_mode.crtc_vtotal = ((tmp >> 16) & 0xffff) + 1;

	if (!transcoder_is_dsi(cpu_transcoder)) {
		tmp = intel_de_read(dev_priv, VBLANK(cpu_transcoder));
		pipe_config->hw.adjusted_mode.crtc_vblank_start =
							(tmp & 0xffff) + 1;
		pipe_config->hw.adjusted_mode.crtc_vblank_end =
						((tmp >> 16) & 0xffff) + 1;
	}
	tmp = intel_de_read(dev_priv, VSYNC(cpu_transcoder));
	pipe_config->hw.adjusted_mode.crtc_vsync_start = (tmp & 0xffff) + 1;
	pipe_config->hw.adjusted_mode.crtc_vsync_end = ((tmp >> 16) & 0xffff) + 1;

	if (intel_pipe_is_interlaced(pipe_config)) {
		pipe_config->hw.adjusted_mode.flags |= DRM_MODE_FLAG_INTERLACE;
		pipe_config->hw.adjusted_mode.crtc_vtotal += 1;
		pipe_config->hw.adjusted_mode.crtc_vblank_end += 1;
	}
}

static void intel_get_pipe_src_size(struct intel_crtc *crtc,
				    struct intel_crtc_state *pipe_config)
{
	struct drm_device *dev = crtc->base.dev;
	struct drm_i915_private *dev_priv = to_i915(dev);
	u32 tmp;

	tmp = intel_de_read(dev_priv, PIPESRC(crtc->pipe));
	pipe_config->pipe_src_h = (tmp & 0xffff) + 1;
	pipe_config->pipe_src_w = ((tmp >> 16) & 0xffff) + 1;

	pipe_config->hw.mode.vdisplay = pipe_config->pipe_src_h;
	pipe_config->hw.mode.hdisplay = pipe_config->pipe_src_w;
}

void intel_mode_from_pipe_config(struct drm_display_mode *mode,
				 struct intel_crtc_state *pipe_config)
{
	mode->hdisplay = pipe_config->hw.adjusted_mode.crtc_hdisplay;
	mode->htotal = pipe_config->hw.adjusted_mode.crtc_htotal;
	mode->hsync_start = pipe_config->hw.adjusted_mode.crtc_hsync_start;
	mode->hsync_end = pipe_config->hw.adjusted_mode.crtc_hsync_end;

	mode->vdisplay = pipe_config->hw.adjusted_mode.crtc_vdisplay;
	mode->vtotal = pipe_config->hw.adjusted_mode.crtc_vtotal;
	mode->vsync_start = pipe_config->hw.adjusted_mode.crtc_vsync_start;
	mode->vsync_end = pipe_config->hw.adjusted_mode.crtc_vsync_end;

	mode->flags = pipe_config->hw.adjusted_mode.flags;
	mode->type = DRM_MODE_TYPE_DRIVER;

	mode->clock = pipe_config->hw.adjusted_mode.crtc_clock;

	drm_mode_set_name(mode);
}

static void i9xx_set_pipeconf(const struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	u32 pipeconf;

	pipeconf = 0;

	/* we keep both pipes enabled on 830 */
	if (IS_I830(dev_priv))
		pipeconf |= intel_de_read(dev_priv, PIPECONF(crtc->pipe)) & PIPECONF_ENABLE;

	if (crtc_state->double_wide)
		pipeconf |= PIPECONF_DOUBLE_WIDE;

	/* only g4x and later have fancy bpc/dither controls */
	if (IS_G4X(dev_priv) || IS_VALLEYVIEW(dev_priv) ||
	    IS_CHERRYVIEW(dev_priv)) {
		/* Bspec claims that we can't use dithering for 30bpp pipes. */
		if (crtc_state->dither && crtc_state->pipe_bpp != 30)
			pipeconf |= PIPECONF_DITHER_EN |
				    PIPECONF_DITHER_TYPE_SP;

		switch (crtc_state->pipe_bpp) {
		case 18:
			pipeconf |= PIPECONF_6BPC;
			break;
		case 24:
			pipeconf |= PIPECONF_8BPC;
			break;
		case 30:
			pipeconf |= PIPECONF_10BPC;
			break;
		default:
			/* Case prevented by intel_choose_pipe_bpp_dither. */
			BUG();
		}
	}

	if (crtc_state->hw.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) {
		if (INTEL_GEN(dev_priv) < 4 ||
		    intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO))
			pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
		else
			pipeconf |= PIPECONF_INTERLACE_W_SYNC_SHIFT;
	} else {
		pipeconf |= PIPECONF_PROGRESSIVE;
	}

	if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
	     crtc_state->limited_color_range)
		pipeconf |= PIPECONF_COLOR_RANGE_SELECT;

	pipeconf |= PIPECONF_GAMMA_MODE(crtc_state->gamma_mode);

	pipeconf |= PIPECONF_FRAME_START_DELAY(0);

	intel_de_write(dev_priv, PIPECONF(crtc->pipe), pipeconf);
	intel_de_posting_read(dev_priv, PIPECONF(crtc->pipe));
}

static int i8xx_crtc_compute_clock(struct intel_crtc *crtc,
				   struct intel_crtc_state *crtc_state)
{
	struct drm_device *dev = crtc->base.dev;
	struct drm_i915_private *dev_priv = to_i915(dev);
	const struct intel_limit *limit;
	int refclk = 48000;

	memset(&crtc_state->dpll_hw_state, 0,
	       sizeof(crtc_state->dpll_hw_state));

	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
		if (intel_panel_use_ssc(dev_priv)) {
			refclk = dev_priv->vbt.lvds_ssc_freq;
			drm_dbg_kms(&dev_priv->drm,
				    "using SSC reference clock of %d kHz\n",
				    refclk);
		}

		limit = &intel_limits_i8xx_lvds;
	} else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DVO)) {
		limit = &intel_limits_i8xx_dvo;
	} else {
		limit = &intel_limits_i8xx_dac;
	}

	if (!crtc_state->clock_set &&
	    !i9xx_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
				 refclk, NULL, &crtc_state->dpll)) {
		drm_err(&dev_priv->drm,
			"Couldn't find PLL settings for mode!\n");
		return -EINVAL;
	}

	i8xx_compute_dpll(crtc, crtc_state, NULL);

	return 0;
}

static int g4x_crtc_compute_clock(struct intel_crtc *crtc,
				  struct intel_crtc_state *crtc_state)
{
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	const struct intel_limit *limit;
	int refclk = 96000;

	memset(&crtc_state->dpll_hw_state, 0,
	       sizeof(crtc_state->dpll_hw_state));

	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
		if (intel_panel_use_ssc(dev_priv)) {
			refclk = dev_priv->vbt.lvds_ssc_freq;
			drm_dbg_kms(&dev_priv->drm,
				    "using SSC reference clock of %d kHz\n",
				    refclk);
		}

		if (intel_is_dual_link_lvds(dev_priv))
			limit = &intel_limits_g4x_dual_channel_lvds;
		else
			limit = &intel_limits_g4x_single_channel_lvds;
	} else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI) ||
		   intel_crtc_has_type(crtc_state, INTEL_OUTPUT_ANALOG)) {
		limit = &intel_limits_g4x_hdmi;
	} else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO)) {
		limit = &intel_limits_g4x_sdvo;
	} else {
		/* The option is for other outputs */
		limit = &intel_limits_i9xx_sdvo;
	}

	if (!crtc_state->clock_set &&
	    !g4x_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
				refclk, NULL, &crtc_state->dpll)) {
		drm_err(&dev_priv->drm,
			"Couldn't find PLL settings for mode!\n");
		return -EINVAL;
	}

	i9xx_compute_dpll(crtc, crtc_state, NULL);

	return 0;
}

static int pnv_crtc_compute_clock(struct intel_crtc *crtc,
				  struct intel_crtc_state *crtc_state)
{
	struct drm_device *dev = crtc->base.dev;
	struct drm_i915_private *dev_priv = to_i915(dev);
	const struct intel_limit *limit;
	int refclk = 96000;

	memset(&crtc_state->dpll_hw_state, 0,
	       sizeof(crtc_state->dpll_hw_state));

	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
		if (intel_panel_use_ssc(dev_priv)) {
			refclk = dev_priv->vbt.lvds_ssc_freq;
			drm_dbg_kms(&dev_priv->drm,
				    "using SSC reference clock of %d kHz\n",
				    refclk);
		}

		limit = &pnv_limits_lvds;
	} else {
		limit = &pnv_limits_sdvo;
	}

	if (!crtc_state->clock_set &&
	    !pnv_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
				refclk, NULL, &crtc_state->dpll)) {
		drm_err(&dev_priv->drm,
			"Couldn't find PLL settings for mode!\n");
		return -EINVAL;
	}

	i9xx_compute_dpll(crtc, crtc_state, NULL);

	return 0;
}

static int i9xx_crtc_compute_clock(struct intel_crtc *crtc,
				   struct intel_crtc_state *crtc_state)
{
	struct drm_device *dev = crtc->base.dev;
	struct drm_i915_private *dev_priv = to_i915(dev);
	const struct intel_limit *limit;
	int refclk = 96000;

	memset(&crtc_state->dpll_hw_state, 0,
	       sizeof(crtc_state->dpll_hw_state));

	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
		if (intel_panel_use_ssc(dev_priv)) {
			refclk = dev_priv->vbt.lvds_ssc_freq;
			drm_dbg_kms(&dev_priv->drm,
				    "using SSC reference clock of %d kHz\n",
				    refclk);
		}

		limit = &intel_limits_i9xx_lvds;
	} else {
		limit = &intel_limits_i9xx_sdvo;
	}

	if (!crtc_state->clock_set &&
	    !i9xx_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
				 refclk, NULL, &crtc_state->dpll)) {
		drm_err(&dev_priv->drm,
			"Couldn't find PLL settings for mode!\n");
		return -EINVAL;
	}

	i9xx_compute_dpll(crtc, crtc_state, NULL);

	return 0;
}

static int chv_crtc_compute_clock(struct intel_crtc *crtc,
				  struct intel_crtc_state *crtc_state)
{
	int refclk = 100000;
	const struct intel_limit *limit = &intel_limits_chv;
	struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev);

	memset(&crtc_state->dpll_hw_state, 0,
	       sizeof(crtc_state->dpll_hw_state));

	if (!crtc_state->clock_set &&
	    !chv_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
				refclk, NULL, &crtc_state->dpll)) {
		drm_err(&i915->drm, "Couldn't find PLL settings for mode!\n");
		return -EINVAL;
	}

	chv_compute_dpll(crtc, crtc_state);

	return 0;
}

static int vlv_crtc_compute_clock(struct intel_crtc *crtc,
				  struct intel_crtc_state *crtc_state)
{
	int refclk = 100000;
	const struct intel_limit *limit = &intel_limits_vlv;
	struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev);

	memset(&crtc_state->dpll_hw_state, 0,
	       sizeof(crtc_state->dpll_hw_state));

	if (!crtc_state->clock_set &&
	    !vlv_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
				refclk, NULL, &crtc_state->dpll)) {
		drm_err(&i915->drm,  "Couldn't find PLL settings for mode!\n");
		return -EINVAL;
	}

	vlv_compute_dpll(crtc, crtc_state);

	return 0;
}

static bool i9xx_has_pfit(struct drm_i915_private *dev_priv)
{
	if (IS_I830(dev_priv))
		return false;

	return INTEL_GEN(dev_priv) >= 4 ||
		IS_PINEVIEW(dev_priv) || IS_MOBILE(dev_priv);
}

static void i9xx_get_pfit_config(struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	u32 tmp;

	if (!i9xx_has_pfit(dev_priv))
		return;

	tmp = intel_de_read(dev_priv, PFIT_CONTROL);
	if (!(tmp & PFIT_ENABLE))
		return;

	/* Check whether the pfit is attached to our pipe. */
	if (INTEL_GEN(dev_priv) < 4) {
		if (crtc->pipe != PIPE_B)
			return;
	} else {
		if ((tmp & PFIT_PIPE_MASK) != (crtc->pipe << PFIT_PIPE_SHIFT))
			return;
	}

	crtc_state->gmch_pfit.control = tmp;
	crtc_state->gmch_pfit.pgm_ratios =
		intel_de_read(dev_priv, PFIT_PGM_RATIOS);
}

static void vlv_crtc_clock_get(struct intel_crtc *crtc,
			       struct intel_crtc_state *pipe_config)
{
	struct drm_device *dev = crtc->base.dev;
	struct drm_i915_private *dev_priv = to_i915(dev);
	enum pipe pipe = crtc->pipe;
	struct dpll clock;
	u32 mdiv;
	int refclk = 100000;

	/* In case of DSI, DPLL will not be used */
	if ((pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) == 0)
		return;

	vlv_dpio_get(dev_priv);
	mdiv = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW3(pipe));
	vlv_dpio_put(dev_priv);

	clock.m1 = (mdiv >> DPIO_M1DIV_SHIFT) & 7;
	clock.m2 = mdiv & DPIO_M2DIV_MASK;
	clock.n = (mdiv >> DPIO_N_SHIFT) & 0xf;
	clock.p1 = (mdiv >> DPIO_P1_SHIFT) & 7;
	clock.p2 = (mdiv >> DPIO_P2_SHIFT) & 0x1f;

	pipe_config->port_clock = vlv_calc_dpll_params(refclk, &clock);
}

static void
i9xx_get_initial_plane_config(struct intel_crtc *crtc,
			      struct intel_initial_plane_config *plane_config)
{
	struct drm_device *dev = crtc->base.dev;
	struct drm_i915_private *dev_priv = to_i915(dev);
	struct intel_plane *plane = to_intel_plane(crtc->base.primary);
	enum i9xx_plane_id i9xx_plane = plane->i9xx_plane;
	enum pipe pipe;
	u32 val, base, offset;
	int fourcc, pixel_format;
	unsigned int aligned_height;
	struct drm_framebuffer *fb;
	struct intel_framebuffer *intel_fb;

	if (!plane->get_hw_state(plane, &pipe))
		return;

	drm_WARN_ON(dev, pipe != crtc->pipe);

	intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
	if (!intel_fb) {
		drm_dbg_kms(&dev_priv->drm, "failed to alloc fb\n");
		return;
	}

	fb = &intel_fb->base;

	fb->dev = dev;

	val = intel_de_read(dev_priv, DSPCNTR(i9xx_plane));

	if (INTEL_GEN(dev_priv) >= 4) {
		if (val & DISPPLANE_TILED) {
			plane_config->tiling = I915_TILING_X;
			fb->modifier = I915_FORMAT_MOD_X_TILED;
		}

		if (val & DISPPLANE_ROTATE_180)
			plane_config->rotation = DRM_MODE_ROTATE_180;
	}

	if (IS_CHERRYVIEW(dev_priv) && pipe == PIPE_B &&
	    val & DISPPLANE_MIRROR)
		plane_config->rotation |= DRM_MODE_REFLECT_X;

	pixel_format = val & DISPPLANE_PIXFORMAT_MASK;
	fourcc = i9xx_format_to_fourcc(pixel_format);
	fb->format = drm_format_info(fourcc);

	if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
		offset = intel_de_read(dev_priv, DSPOFFSET(i9xx_plane));
		base = intel_de_read(dev_priv, DSPSURF(i9xx_plane)) & 0xfffff000;
	} else if (INTEL_GEN(dev_priv) >= 4) {
		if (plane_config->tiling)
			offset = intel_de_read(dev_priv,
					       DSPTILEOFF(i9xx_plane));
		else
			offset = intel_de_read(dev_priv,
					       DSPLINOFF(i9xx_plane));
		base = intel_de_read(dev_priv, DSPSURF(i9xx_plane)) & 0xfffff000;
	} else {
		base = intel_de_read(dev_priv, DSPADDR(i9xx_plane));
	}
	plane_config->base = base;

	val = intel_de_read(dev_priv, PIPESRC(pipe));
	fb->width = ((val >> 16) & 0xfff) + 1;
	fb->height = ((val >> 0) & 0xfff) + 1;

	val = intel_de_read(dev_priv, DSPSTRIDE(i9xx_plane));
	fb->pitches[0] = val & 0xffffffc0;

	aligned_height = intel_fb_align_height(fb, 0, fb->height);

	plane_config->size = fb->pitches[0] * aligned_height;

	drm_dbg_kms(&dev_priv->drm,
		    "%s/%s with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
		    crtc->base.name, plane->base.name, fb->width, fb->height,
		    fb->format->cpp[0] * 8, base, fb->pitches[0],
		    plane_config->size);

	plane_config->fb = intel_fb;
}

static void chv_crtc_clock_get(struct intel_crtc *crtc,
			       struct intel_crtc_state *pipe_config)
{
	struct drm_device *dev = crtc->base.dev;
	struct drm_i915_private *dev_priv = to_i915(dev);
	enum pipe pipe = crtc->pipe;
	enum dpio_channel port = vlv_pipe_to_channel(pipe);
	struct dpll clock;
	u32 cmn_dw13, pll_dw0, pll_dw1, pll_dw2, pll_dw3;
	int refclk = 100000;

	/* In case of DSI, DPLL will not be used */
	if ((pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) == 0)
		return;

	vlv_dpio_get(dev_priv);
	cmn_dw13 = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW13(port));
	pll_dw0 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW0(port));
	pll_dw1 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW1(port));
	pll_dw2 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW2(port));
	pll_dw3 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW3(port));
	vlv_dpio_put(dev_priv);

	clock.m1 = (pll_dw1 & 0x7) == DPIO_CHV_M1_DIV_BY_2 ? 2 : 0;
	clock.m2 = (pll_dw0 & 0xff) << 22;
	if (pll_dw3 & DPIO_CHV_FRAC_DIV_EN)
		clock.m2 |= pll_dw2 & 0x3fffff;
	clock.n = (pll_dw1 >> DPIO_CHV_N_DIV_SHIFT) & 0xf;
	clock.p1 = (cmn_dw13 >> DPIO_CHV_P1_DIV_SHIFT) & 0x7;
	clock.p2 = (cmn_dw13 >> DPIO_CHV_P2_DIV_SHIFT) & 0x1f;

	pipe_config->port_clock = chv_calc_dpll_params(refclk, &clock);
}

static enum intel_output_format
bdw_get_pipemisc_output_format(struct intel_crtc *crtc)
{
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	u32 tmp;

	tmp = intel_de_read(dev_priv, PIPEMISC(crtc->pipe));

	if (tmp & PIPEMISC_YUV420_ENABLE) {
		/* We support 4:2:0 in full blend mode only */
		drm_WARN_ON(&dev_priv->drm,
			    (tmp & PIPEMISC_YUV420_MODE_FULL_BLEND) == 0);

		return INTEL_OUTPUT_FORMAT_YCBCR420;
	} else if (tmp & PIPEMISC_OUTPUT_COLORSPACE_YUV) {
		return INTEL_OUTPUT_FORMAT_YCBCR444;
	} else {
		return INTEL_OUTPUT_FORMAT_RGB;
	}
}

static void i9xx_get_pipe_color_config(struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct intel_plane *plane = to_intel_plane(crtc->base.primary);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	enum i9xx_plane_id i9xx_plane = plane->i9xx_plane;
	u32 tmp;

	tmp = intel_de_read(dev_priv, DSPCNTR(i9xx_plane));

	if (tmp & DISPPLANE_GAMMA_ENABLE)
		crtc_state->gamma_enable = true;

	if (!HAS_GMCH(dev_priv) &&
	    tmp & DISPPLANE_PIPE_CSC_ENABLE)
		crtc_state->csc_enable = true;
}

static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
				 struct intel_crtc_state *pipe_config)
{
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	enum intel_display_power_domain power_domain;
	intel_wakeref_t wakeref;
	u32 tmp;
	bool ret;

	power_domain = POWER_DOMAIN_PIPE(crtc->pipe);
	wakeref = intel_display_power_get_if_enabled(dev_priv, power_domain);
	if (!wakeref)
		return false;

	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
	pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
	pipe_config->shared_dpll = NULL;

	ret = false;

	tmp = intel_de_read(dev_priv, PIPECONF(crtc->pipe));
	if (!(tmp & PIPECONF_ENABLE))
		goto out;

	if (IS_G4X(dev_priv) || IS_VALLEYVIEW(dev_priv) ||
	    IS_CHERRYVIEW(dev_priv)) {
		switch (tmp & PIPECONF_BPC_MASK) {
		case PIPECONF_6BPC:
			pipe_config->pipe_bpp = 18;
			break;
		case PIPECONF_8BPC:
			pipe_config->pipe_bpp = 24;
			break;
		case PIPECONF_10BPC:
			pipe_config->pipe_bpp = 30;
			break;
		default:
			break;
		}
	}

	if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
	    (tmp & PIPECONF_COLOR_RANGE_SELECT))
		pipe_config->limited_color_range = true;

	pipe_config->gamma_mode = (tmp & PIPECONF_GAMMA_MODE_MASK_I9XX) >>
		PIPECONF_GAMMA_MODE_SHIFT;

	if (IS_CHERRYVIEW(dev_priv))
		pipe_config->cgm_mode = intel_de_read(dev_priv,
						      CGM_PIPE_MODE(crtc->pipe));

	i9xx_get_pipe_color_config(pipe_config);
	intel_color_get_config(pipe_config);

	if (INTEL_GEN(dev_priv) < 4)
		pipe_config->double_wide = tmp & PIPECONF_DOUBLE_WIDE;

	intel_get_pipe_timings(crtc, pipe_config);
	intel_get_pipe_src_size(crtc, pipe_config);

	i9xx_get_pfit_config(pipe_config);

	if (INTEL_GEN(dev_priv) >= 4) {
		/* No way to read it out on pipes B and C */
		if (IS_CHERRYVIEW(dev_priv) && crtc->pipe != PIPE_A)
			tmp = dev_priv->chv_dpll_md[crtc->pipe];
		else
			tmp = intel_de_read(dev_priv, DPLL_MD(crtc->pipe));
		pipe_config->pixel_multiplier =
			((tmp & DPLL_MD_UDI_MULTIPLIER_MASK)
			 >> DPLL_MD_UDI_MULTIPLIER_SHIFT) + 1;
		pipe_config->dpll_hw_state.dpll_md = tmp;
	} else if (IS_I945G(dev_priv) || IS_I945GM(dev_priv) ||
		   IS_G33(dev_priv) || IS_PINEVIEW(dev_priv)) {
		tmp = intel_de_read(dev_priv, DPLL(crtc->pipe));
		pipe_config->pixel_multiplier =
			((tmp & SDVO_MULTIPLIER_MASK)
			 >> SDVO_MULTIPLIER_SHIFT_HIRES) + 1;
	} else {
		/* Note that on i915G/GM the pixel multiplier is in the sdvo
		 * port and will be fixed up in the encoder->get_config
		 * function. */
		pipe_config->pixel_multiplier = 1;
	}
	pipe_config->dpll_hw_state.dpll = intel_de_read(dev_priv,
							DPLL(crtc->pipe));
	if (!IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv)) {
		pipe_config->dpll_hw_state.fp0 = intel_de_read(dev_priv,
							       FP0(crtc->pipe));
		pipe_config->dpll_hw_state.fp1 = intel_de_read(dev_priv,
							       FP1(crtc->pipe));
	} else {
		/* Mask out read-only status bits. */
		pipe_config->dpll_hw_state.dpll &= ~(DPLL_LOCK_VLV |
						     DPLL_PORTC_READY_MASK |
						     DPLL_PORTB_READY_MASK);
	}

	if (IS_CHERRYVIEW(dev_priv))
		chv_crtc_clock_get(crtc, pipe_config);
	else if (IS_VALLEYVIEW(dev_priv))
		vlv_crtc_clock_get(crtc, pipe_config);
	else
		i9xx_crtc_clock_get(crtc, pipe_config);

	/*
	 * Normally the dotclock is filled in by the encoder .get_config()
	 * but in case the pipe is enabled w/o any ports we need a sane
	 * default.
	 */
	pipe_config->hw.adjusted_mode.crtc_clock =
		pipe_config->port_clock / pipe_config->pixel_multiplier;

	ret = true;

out:
	intel_display_power_put(dev_priv, power_domain, wakeref);

	return ret;
}

static void ilk_init_pch_refclk(struct drm_i915_private *dev_priv)
{
	struct intel_encoder *encoder;
	int i;
	u32 val, final;
	bool has_lvds = false;
	bool has_cpu_edp = false;
	bool has_panel = false;
	bool has_ck505 = false;
	bool can_ssc = false;
	bool using_ssc_source = false;

	/* We need to take the global config into account */
	for_each_intel_encoder(&dev_priv->drm, encoder) {
		switch (encoder->type) {
		case INTEL_OUTPUT_LVDS:
			has_panel = true;
			has_lvds = true;
			break;
		case INTEL_OUTPUT_EDP:
			has_panel = true;
			if (encoder->port == PORT_A)
				has_cpu_edp = true;
			break;
		default:
			break;
		}
	}

	if (HAS_PCH_IBX(dev_priv)) {
		has_ck505 = dev_priv->vbt.display_clock_mode;
		can_ssc = has_ck505;
	} else {
		has_ck505 = false;
		can_ssc = true;
	}

	/* Check if any DPLLs are using the SSC source */
	for (i = 0; i < dev_priv->dpll.num_shared_dpll; i++) {
		u32 temp = intel_de_read(dev_priv, PCH_DPLL(i));

		if (!(temp & DPLL_VCO_ENABLE))
			continue;

		if ((temp & PLL_REF_INPUT_MASK) ==
		    PLLB_REF_INPUT_SPREADSPECTRUMIN) {
			using_ssc_source = true;
			break;
		}
	}

	drm_dbg_kms(&dev_priv->drm,
		    "has_panel %d has_lvds %d has_ck505 %d using_ssc_source %d\n",
		    has_panel, has_lvds, has_ck505, using_ssc_source);

	/* Ironlake: try to setup display ref clock before DPLL
	 * enabling. This is only under driver's control after
	 * PCH B stepping, previous chipset stepping should be
	 * ignoring this setting.
	 */
	val = intel_de_read(dev_priv, PCH_DREF_CONTROL);

	/* As we must carefully and slowly disable/enable each source in turn,
	 * compute the final state we want first and check if we need to
	 * make any changes at all.
	 */
	final = val;
	final &= ~DREF_NONSPREAD_SOURCE_MASK;
	if (has_ck505)
		final |= DREF_NONSPREAD_CK505_ENABLE;
	else
		final |= DREF_NONSPREAD_SOURCE_ENABLE;

	final &= ~DREF_SSC_SOURCE_MASK;
	final &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
	final &= ~DREF_SSC1_ENABLE;

	if (has_panel) {
		final |= DREF_SSC_SOURCE_ENABLE;

		if (intel_panel_use_ssc(dev_priv) && can_ssc)
			final |= DREF_SSC1_ENABLE;

		if (has_cpu_edp) {
			if (intel_panel_use_ssc(dev_priv) && can_ssc)
				final |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
			else
				final |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
		} else
			final |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
	} else if (using_ssc_source) {
		final |= DREF_SSC_SOURCE_ENABLE;
		final |= DREF_SSC1_ENABLE;
	}

	if (final == val)
		return;

	/* Always enable nonspread source */
	val &= ~DREF_NONSPREAD_SOURCE_MASK;

	if (has_ck505)
		val |= DREF_NONSPREAD_CK505_ENABLE;
	else
		val |= DREF_NONSPREAD_SOURCE_ENABLE;

	if (has_panel) {
		val &= ~DREF_SSC_SOURCE_MASK;
		val |= DREF_SSC_SOURCE_ENABLE;

		/* SSC must be turned on before enabling the CPU output  */
		if (intel_panel_use_ssc(dev_priv) && can_ssc) {
			drm_dbg_kms(&dev_priv->drm, "Using SSC on panel\n");
			val |= DREF_SSC1_ENABLE;
		} else
			val &= ~DREF_SSC1_ENABLE;

		/* Get SSC going before enabling the outputs */
		intel_de_write(dev_priv, PCH_DREF_CONTROL, val);
		intel_de_posting_read(dev_priv, PCH_DREF_CONTROL);
		udelay(200);

		val &= ~DREF_CPU_SOURCE_OUTPUT_MASK;

		/* Enable CPU source on CPU attached eDP */
		if (has_cpu_edp) {
			if (intel_panel_use_ssc(dev_priv) && can_ssc) {
				drm_dbg_kms(&dev_priv->drm,
					    "Using SSC on eDP\n");
				val |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
			} else
				val |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
		} else
			val |= DREF_CPU_SOURCE_OUTPUT_DISABLE;

		intel_de_write(dev_priv, PCH_DREF_CONTROL, val);
		intel_de_posting_read(dev_priv, PCH_DREF_CONTROL);
		udelay(200);
	} else {
		drm_dbg_kms(&dev_priv->drm, "Disabling CPU source output\n");

		val &= ~DREF_CPU_SOURCE_OUTPUT_MASK;

		/* Turn off CPU output */
		val |= DREF_CPU_SOURCE_OUTPUT_DISABLE;

		intel_de_write(dev_priv, PCH_DREF_CONTROL, val);
		intel_de_posting_read(dev_priv, PCH_DREF_CONTROL);
		udelay(200);

		if (!using_ssc_source) {
			drm_dbg_kms(&dev_priv->drm, "Disabling SSC source\n");

			/* Turn off the SSC source */
			val &= ~DREF_SSC_SOURCE_MASK;
			val |= DREF_SSC_SOURCE_DISABLE;

			/* Turn off SSC1 */
			val &= ~DREF_SSC1_ENABLE;

			intel_de_write(dev_priv, PCH_DREF_CONTROL, val);
			intel_de_posting_read(dev_priv, PCH_DREF_CONTROL);
			udelay(200);
		}
	}

	BUG_ON(val != final);
}

static void lpt_reset_fdi_mphy(struct drm_i915_private *dev_priv)
{
	u32 tmp;

	tmp = intel_de_read(dev_priv, SOUTH_CHICKEN2);
	tmp |= FDI_MPHY_IOSFSB_RESET_CTL;
	intel_de_write(dev_priv, SOUTH_CHICKEN2, tmp);

	if (wait_for_us(intel_de_read(dev_priv, SOUTH_CHICKEN2) &
			FDI_MPHY_IOSFSB_RESET_STATUS, 100))
		drm_err(&dev_priv->drm, "FDI mPHY reset assert timeout\n");

	tmp = intel_de_read(dev_priv, SOUTH_CHICKEN2);
	tmp &= ~FDI_MPHY_IOSFSB_RESET_CTL;
	intel_de_write(dev_priv, SOUTH_CHICKEN2, tmp);

	if (wait_for_us((intel_de_read(dev_priv, SOUTH_CHICKEN2) &
			 FDI_MPHY_IOSFSB_RESET_STATUS) == 0, 100))
		drm_err(&dev_priv->drm, "FDI mPHY reset de-assert timeout\n");
}

/* WaMPhyProgramming:hsw */
static void lpt_program_fdi_mphy(struct drm_i915_private *dev_priv)
{
	u32 tmp;

	tmp = intel_sbi_read(dev_priv, 0x8008, SBI_MPHY);
	tmp &= ~(0xFF << 24);
	tmp |= (0x12 << 24);
	intel_sbi_write(dev_priv, 0x8008, tmp, SBI_MPHY);

	tmp = intel_sbi_read(dev_priv, 0x2008, SBI_MPHY);
	tmp |= (1 << 11);
	intel_sbi_write(dev_priv, 0x2008, tmp, SBI_MPHY);

	tmp = intel_sbi_read(dev_priv, 0x2108, SBI_MPHY);
	tmp |= (1 << 11);
	intel_sbi_write(dev_priv, 0x2108, tmp, SBI_MPHY);

	tmp = intel_sbi_read(dev_priv, 0x206C, SBI_MPHY);
	tmp |= (1 << 24) | (1 << 21) | (1 << 18);
	intel_sbi_write(dev_priv, 0x206C, tmp, SBI_MPHY);

	tmp = intel_sbi_read(dev_priv, 0x216C, SBI_MPHY);
	tmp |= (1 << 24) | (1 << 21) | (1 << 18);
	intel_sbi_write(dev_priv, 0x216C, tmp, SBI_MPHY);

	tmp = intel_sbi_read(dev_priv, 0x2080, SBI_MPHY);
	tmp &= ~(7 << 13);
	tmp |= (5 << 13);
	intel_sbi_write(dev_priv, 0x2080, tmp, SBI_MPHY);

	tmp = intel_sbi_read(dev_priv, 0x2180, SBI_MPHY);
	tmp &= ~(7 << 13);
	tmp |= (5 << 13);
	intel_sbi_write(dev_priv, 0x2180, tmp, SBI_MPHY);

	tmp = intel_sbi_read(dev_priv, 0x208C, SBI_MPHY);
	tmp &= ~0xFF;
	tmp |= 0x1C;
	intel_sbi_write(dev_priv, 0x208C, tmp, SBI_MPHY);

	tmp = intel_sbi_read(dev_priv, 0x218C, SBI_MPHY);
	tmp &= ~0xFF;
	tmp |= 0x1C;
	intel_sbi_write(dev_priv, 0x218C, tmp, SBI_MPHY);

	tmp = intel_sbi_read(dev_priv, 0x2098, SBI_MPHY);
	tmp &= ~(0xFF << 16);
	tmp |= (0x1C << 16);
	intel_sbi_write(dev_priv, 0x2098, tmp, SBI_MPHY);

	tmp = intel_sbi_read(dev_priv, 0x2198, SBI_MPHY);
	tmp &= ~(0xFF << 16);
	tmp |= (0x1C << 16);
	intel_sbi_write(dev_priv, 0x2198, tmp, SBI_MPHY);

	tmp = intel_sbi_read(dev_priv, 0x20C4, SBI_MPHY);
	tmp |= (1 << 27);
	intel_sbi_write(dev_priv, 0x20C4, tmp, SBI_MPHY);

	tmp = intel_sbi_read(dev_priv, 0x21C4, SBI_MPHY);
	tmp |= (1 << 27);
	intel_sbi_write(dev_priv, 0x21C4, tmp, SBI_MPHY);

	tmp = intel_sbi_read(dev_priv, 0x20EC, SBI_MPHY);
	tmp &= ~(0xF << 28);
	tmp |= (4 << 28);
	intel_sbi_write(dev_priv, 0x20EC, tmp, SBI_MPHY);

	tmp = intel_sbi_read(dev_priv, 0x21EC, SBI_MPHY);
	tmp &= ~(0xF << 28);
	tmp |= (4 << 28);
	intel_sbi_write(dev_priv, 0x21EC, tmp, SBI_MPHY);
}

/* Implements 3 different sequences from BSpec chapter "Display iCLK
 * Programming" based on the parameters passed:
 * - Sequence to enable CLKOUT_DP
 * - Sequence to enable CLKOUT_DP without spread
 * - Sequence to enable CLKOUT_DP for FDI usage and configure PCH FDI I/O
 */
static void lpt_enable_clkout_dp(struct drm_i915_private *dev_priv,
				 bool with_spread, bool with_fdi)
{
	u32 reg, tmp;

	if (drm_WARN(&dev_priv->drm, with_fdi && !with_spread,
		     "FDI requires downspread\n"))
		with_spread = true;
	if (drm_WARN(&dev_priv->drm, HAS_PCH_LPT_LP(dev_priv) &&
		     with_fdi, "LP PCH doesn't have FDI\n"))
		with_fdi = false;

	mutex_lock(&dev_priv->sb_lock);

	tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
	tmp &= ~SBI_SSCCTL_DISABLE;
	tmp |= SBI_SSCCTL_PATHALT;
	intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);

	udelay(24);

	if (with_spread) {
		tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
		tmp &= ~SBI_SSCCTL_PATHALT;
		intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);

		if (with_fdi) {
			lpt_reset_fdi_mphy(dev_priv);
			lpt_program_fdi_mphy(dev_priv);
		}
	}

	reg = HAS_PCH_LPT_LP(dev_priv) ? SBI_GEN0 : SBI_DBUFF0;
	tmp = intel_sbi_read(dev_priv, reg, SBI_ICLK);
	tmp |= SBI_GEN0_CFG_BUFFENABLE_DISABLE;
	intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK);

	mutex_unlock(&dev_priv->sb_lock);
}

/* Sequence to disable CLKOUT_DP */
void lpt_disable_clkout_dp(struct drm_i915_private *dev_priv)
{
	u32 reg, tmp;

	mutex_lock(&dev_priv->sb_lock);

	reg = HAS_PCH_LPT_LP(dev_priv) ? SBI_GEN0 : SBI_DBUFF0;
	tmp = intel_sbi_read(dev_priv, reg, SBI_ICLK);
	tmp &= ~SBI_GEN0_CFG_BUFFENABLE_DISABLE;
	intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK);

	tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
	if (!(tmp & SBI_SSCCTL_DISABLE)) {
		if (!(tmp & SBI_SSCCTL_PATHALT)) {
			tmp |= SBI_SSCCTL_PATHALT;
			intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
			udelay(32);
		}
		tmp |= SBI_SSCCTL_DISABLE;
		intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
	}

	mutex_unlock(&dev_priv->sb_lock);
}

#define BEND_IDX(steps) ((50 + (steps)) / 5)

static const u16 sscdivintphase[] = {
	[BEND_IDX( 50)] = 0x3B23,
	[BEND_IDX( 45)] = 0x3B23,
	[BEND_IDX( 40)] = 0x3C23,
	[BEND_IDX( 35)] = 0x3C23,
	[BEND_IDX( 30)] = 0x3D23,
	[BEND_IDX( 25)] = 0x3D23,
	[BEND_IDX( 20)] = 0x3E23,
	[BEND_IDX( 15)] = 0x3E23,
	[BEND_IDX( 10)] = 0x3F23,
	[BEND_IDX(  5)] = 0x3F23,
	[BEND_IDX(  0)] = 0x0025,
	[BEND_IDX( -5)] = 0x0025,
	[BEND_IDX(-10)] = 0x0125,
	[BEND_IDX(-15)] = 0x0125,
	[BEND_IDX(-20)] = 0x0225,
	[BEND_IDX(-25)] = 0x0225,
	[BEND_IDX(-30)] = 0x0325,
	[BEND_IDX(-35)] = 0x0325,
	[BEND_IDX(-40)] = 0x0425,
	[BEND_IDX(-45)] = 0x0425,
	[BEND_IDX(-50)] = 0x0525,
};

/*
 * Bend CLKOUT_DP
 * steps -50 to 50 inclusive, in steps of 5
 * < 0 slow down the clock, > 0 speed up the clock, 0 == no bend (135MHz)
 * change in clock period = -(steps / 10) * 5.787 ps
 */
static void lpt_bend_clkout_dp(struct drm_i915_private *dev_priv, int steps)
{
	u32 tmp;
	int idx = BEND_IDX(steps);

	if (drm_WARN_ON(&dev_priv->drm, steps % 5 != 0))
		return;

	if (drm_WARN_ON(&dev_priv->drm, idx >= ARRAY_SIZE(sscdivintphase)))
		return;

	mutex_lock(&dev_priv->sb_lock);

	if (steps % 10 != 0)
		tmp = 0xAAAAAAAB;
	else
		tmp = 0x00000000;
	intel_sbi_write(dev_priv, SBI_SSCDITHPHASE, tmp, SBI_ICLK);

	tmp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE, SBI_ICLK);
	tmp &= 0xffff0000;
	tmp |= sscdivintphase[idx];
	intel_sbi_write(dev_priv, SBI_SSCDIVINTPHASE, tmp, SBI_ICLK);

	mutex_unlock(&dev_priv->sb_lock);
}

#undef BEND_IDX

static bool spll_uses_pch_ssc(struct drm_i915_private *dev_priv)
{
	u32 fuse_strap = intel_de_read(dev_priv, FUSE_STRAP);
	u32 ctl = intel_de_read(dev_priv, SPLL_CTL);

	if ((ctl & SPLL_PLL_ENABLE) == 0)
		return false;

	if ((ctl & SPLL_REF_MASK) == SPLL_REF_MUXED_SSC &&
	    (fuse_strap & HSW_CPU_SSC_ENABLE) == 0)
		return true;

	if (IS_BROADWELL(dev_priv) &&
	    (ctl & SPLL_REF_MASK) == SPLL_REF_PCH_SSC_BDW)
		return true;

	return false;
}

static bool wrpll_uses_pch_ssc(struct drm_i915_private *dev_priv,
			       enum intel_dpll_id id)
{
	u32 fuse_strap = intel_de_read(dev_priv, FUSE_STRAP);
	u32 ctl = intel_de_read(dev_priv, WRPLL_CTL(id));

	if ((ctl & WRPLL_PLL_ENABLE) == 0)
		return false;

	if ((ctl & WRPLL_REF_MASK) == WRPLL_REF_PCH_SSC)
		return true;

	if ((IS_BROADWELL(dev_priv) || IS_HSW_ULT(dev_priv)) &&
	    (ctl & WRPLL_REF_MASK) == WRPLL_REF_MUXED_SSC_BDW &&
	    (fuse_strap & HSW_CPU_SSC_ENABLE) == 0)
		return true;

	return false;
}

static void lpt_init_pch_refclk(struct drm_i915_private *dev_priv)
{
	struct intel_encoder *encoder;
	bool has_fdi = false;

	for_each_intel_encoder(&dev_priv->drm, encoder) {
		switch (encoder->type) {
		case INTEL_OUTPUT_ANALOG:
			has_fdi = true;
			break;
		default:
			break;
		}
	}

	/*
	 * The BIOS may have decided to use the PCH SSC
	 * reference so we must not disable it until the
	 * relevant PLLs have stopped relying on it. We'll
	 * just leave the PCH SSC reference enabled in case
	 * any active PLL is using it. It will get disabled
	 * after runtime suspend if we don't have FDI.
	 *
	 * TODO: Move the whole reference clock handling
	 * to the modeset sequence proper so that we can
	 * actually enable/disable/reconfigure these things
	 * safely. To do that we need to introduce a real
	 * clock hierarchy. That would also allow us to do
	 * clock bending finally.
	 */
	dev_priv->pch_ssc_use = 0;

	if (spll_uses_pch_ssc(dev_priv)) {
		drm_dbg_kms(&dev_priv->drm, "SPLL using PCH SSC\n");
		dev_priv->pch_ssc_use |= BIT(DPLL_ID_SPLL);
	}

	if (wrpll_uses_pch_ssc(dev_priv, DPLL_ID_WRPLL1)) {
		drm_dbg_kms(&dev_priv->drm, "WRPLL1 using PCH SSC\n");
		dev_priv->pch_ssc_use |= BIT(DPLL_ID_WRPLL1);
	}

	if (wrpll_uses_pch_ssc(dev_priv, DPLL_ID_WRPLL2)) {
		drm_dbg_kms(&dev_priv->drm, "WRPLL2 using PCH SSC\n");
		dev_priv->pch_ssc_use |= BIT(DPLL_ID_WRPLL2);
	}

	if (dev_priv->pch_ssc_use)
		return;

	if (has_fdi) {
		lpt_bend_clkout_dp(dev_priv, 0);
		lpt_enable_clkout_dp(dev_priv, true, true);
	} else {
		lpt_disable_clkout_dp(dev_priv);
	}
}

/*
 * Initialize reference clocks when the driver loads
 */
void intel_init_pch_refclk(struct drm_i915_private *dev_priv)
{
	if (HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv))
		ilk_init_pch_refclk(dev_priv);
	else if (HAS_PCH_LPT(dev_priv))
		lpt_init_pch_refclk(dev_priv);
}

static void ilk_set_pipeconf(const struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	enum pipe pipe = crtc->pipe;
	u32 val;

	val = 0;

	switch (crtc_state->pipe_bpp) {
	case 18:
		val |= PIPECONF_6BPC;
		break;
	case 24:
		val |= PIPECONF_8BPC;
		break;
	case 30:
		val |= PIPECONF_10BPC;
		break;
	case 36:
		val |= PIPECONF_12BPC;
		break;
	default:
		/* Case prevented by intel_choose_pipe_bpp_dither. */
		BUG();
	}

	if (crtc_state->dither)
		val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP);

	if (crtc_state->hw.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
		val |= PIPECONF_INTERLACED_ILK;
	else
		val |= PIPECONF_PROGRESSIVE;

	/*
	 * This would end up with an odd purple hue over
	 * the entire display. Make sure we don't do it.
	 */
	drm_WARN_ON(&dev_priv->drm, crtc_state->limited_color_range &&
		    crtc_state->output_format != INTEL_OUTPUT_FORMAT_RGB);

	if (crtc_state->limited_color_range &&
	    !intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO))
		val |= PIPECONF_COLOR_RANGE_SELECT;

	if (crtc_state->output_format != INTEL_OUTPUT_FORMAT_RGB)
		val |= PIPECONF_OUTPUT_COLORSPACE_YUV709;

	val |= PIPECONF_GAMMA_MODE(crtc_state->gamma_mode);

	val |= PIPECONF_FRAME_START_DELAY(0);

	intel_de_write(dev_priv, PIPECONF(pipe), val);
	intel_de_posting_read(dev_priv, PIPECONF(pipe));
}

static void hsw_set_pipeconf(const struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
	u32 val = 0;

	if (IS_HASWELL(dev_priv) && crtc_state->dither)
		val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP);

	if (crtc_state->hw.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
		val |= PIPECONF_INTERLACED_ILK;
	else
		val |= PIPECONF_PROGRESSIVE;

	if (IS_HASWELL(dev_priv) &&
	    crtc_state->output_format != INTEL_OUTPUT_FORMAT_RGB)
		val |= PIPECONF_OUTPUT_COLORSPACE_YUV_HSW;

	intel_de_write(dev_priv, PIPECONF(cpu_transcoder), val);
	intel_de_posting_read(dev_priv, PIPECONF(cpu_transcoder));
}

static void bdw_set_pipemisc(const struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	u32 val = 0;

	switch (crtc_state->pipe_bpp) {
	case 18:
		val |= PIPEMISC_DITHER_6_BPC;
		break;
	case 24:
		val |= PIPEMISC_DITHER_8_BPC;
		break;
	case 30:
		val |= PIPEMISC_DITHER_10_BPC;
		break;
	case 36:
		val |= PIPEMISC_DITHER_12_BPC;
		break;
	default:
		MISSING_CASE(crtc_state->pipe_bpp);
		break;
	}

	if (crtc_state->dither)
		val |= PIPEMISC_DITHER_ENABLE | PIPEMISC_DITHER_TYPE_SP;

	if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 ||
	    crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR444)
		val |= PIPEMISC_OUTPUT_COLORSPACE_YUV;

	if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420)
		val |= PIPEMISC_YUV420_ENABLE |
			PIPEMISC_YUV420_MODE_FULL_BLEND;

	if (INTEL_GEN(dev_priv) >= 11 &&
	    (crtc_state->active_planes & ~(icl_hdr_plane_mask() |
					   BIT(PLANE_CURSOR))) == 0)
		val |= PIPEMISC_HDR_MODE_PRECISION;

	if (INTEL_GEN(dev_priv) >= 12)
		val |= PIPEMISC_PIXEL_ROUNDING_TRUNC;

	intel_de_write(dev_priv, PIPEMISC(crtc->pipe), val);
}

int bdw_get_pipemisc_bpp(struct intel_crtc *crtc)
{
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	u32 tmp;

	tmp = intel_de_read(dev_priv, PIPEMISC(crtc->pipe));

	switch (tmp & PIPEMISC_DITHER_BPC_MASK) {
	case PIPEMISC_DITHER_6_BPC:
		return 18;
	case PIPEMISC_DITHER_8_BPC:
		return 24;
	case PIPEMISC_DITHER_10_BPC:
		return 30;
	case PIPEMISC_DITHER_12_BPC:
		return 36;
	default:
		MISSING_CASE(tmp);
		return 0;
	}
}

int ilk_get_lanes_required(int target_clock, int link_bw, int bpp)
{
	/*
	 * Account for spread spectrum to avoid
	 * oversubscribing the link. Max center spread
	 * is 2.5%; use 5% for safety's sake.
	 */
	u32 bps = target_clock * bpp * 21 / 20;
	return DIV_ROUND_UP(bps, link_bw * 8);
}

static bool ilk_needs_fb_cb_tune(struct dpll *dpll, int factor)
{
	return i9xx_dpll_compute_m(dpll) < factor * dpll->n;
}

static void ilk_compute_dpll(struct intel_crtc *crtc,
			     struct intel_crtc_state *crtc_state,
			     struct dpll *reduced_clock)
{
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	u32 dpll, fp, fp2;
	int factor;

	/* Enable autotuning of the PLL clock (if permissible) */
	factor = 21;
	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
		if ((intel_panel_use_ssc(dev_priv) &&
		     dev_priv->vbt.lvds_ssc_freq == 100000) ||
		    (HAS_PCH_IBX(dev_priv) &&
		     intel_is_dual_link_lvds(dev_priv)))
			factor = 25;
	} else if (crtc_state->sdvo_tv_clock) {
		factor = 20;
	}

	fp = i9xx_dpll_compute_fp(&crtc_state->dpll);

	if (ilk_needs_fb_cb_tune(&crtc_state->dpll, factor))
		fp |= FP_CB_TUNE;

	if (reduced_clock) {
		fp2 = i9xx_dpll_compute_fp(reduced_clock);

		if (reduced_clock->m < factor * reduced_clock->n)
			fp2 |= FP_CB_TUNE;
	} else {
		fp2 = fp;
	}

	dpll = 0;

	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS))
		dpll |= DPLLB_MODE_LVDS;
	else
		dpll |= DPLLB_MODE_DAC_SERIAL;

	dpll |= (crtc_state->pixel_multiplier - 1)
		<< PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;

	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO) ||
	    intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI))
		dpll |= DPLL_SDVO_HIGH_SPEED;

	if (intel_crtc_has_dp_encoder(crtc_state))
		dpll |= DPLL_SDVO_HIGH_SPEED;

	/*
	 * The high speed IO clock is only really required for
	 * SDVO/HDMI/DP, but we also enable it for CRT to make it
	 * possible to share the DPLL between CRT and HDMI. Enabling
	 * the clock needlessly does no real harm, except use up a
	 * bit of power potentially.
	 *
	 * We'll limit this to IVB with 3 pipes, since it has only two
	 * DPLLs and so DPLL sharing is the only way to get three pipes
	 * driving PCH ports at the same time. On SNB we could do this,
	 * and potentially avoid enabling the second DPLL, but it's not
	 * clear if it''s a win or loss power wise. No point in doing
	 * this on ILK at all since it has a fixed DPLL<->pipe mapping.
	 */
	if (INTEL_NUM_PIPES(dev_priv) == 3 &&
	    intel_crtc_has_type(crtc_state, INTEL_OUTPUT_ANALOG))
		dpll |= DPLL_SDVO_HIGH_SPEED;

	/* compute bitmask from p1 value */
	dpll |= (1 << (crtc_state->dpll.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
	/* also FPA1 */
	dpll |= (1 << (crtc_state->dpll.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;

	switch (crtc_state->dpll.p2) {
	case 5:
		dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
		break;
	case 7:
		dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
		break;
	case 10:
		dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
		break;
	case 14:
		dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
		break;
	}

	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) &&
	    intel_panel_use_ssc(dev_priv))
		dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
	else
		dpll |= PLL_REF_INPUT_DREFCLK;

	dpll |= DPLL_VCO_ENABLE;

	crtc_state->dpll_hw_state.dpll = dpll;
	crtc_state->dpll_hw_state.fp0 = fp;
	crtc_state->dpll_hw_state.fp1 = fp2;
}

static int ilk_crtc_compute_clock(struct intel_crtc *crtc,
				  struct intel_crtc_state *crtc_state)
{
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	struct intel_atomic_state *state =
		to_intel_atomic_state(crtc_state->uapi.state);
	const struct intel_limit *limit;
	int refclk = 120000;

	memset(&crtc_state->dpll_hw_state, 0,
	       sizeof(crtc_state->dpll_hw_state));

	/* CPU eDP is the only output that doesn't need a PCH PLL of its own. */
	if (!crtc_state->has_pch_encoder)
		return 0;

	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
		if (intel_panel_use_ssc(dev_priv)) {
			drm_dbg_kms(&dev_priv->drm,
				    "using SSC reference clock of %d kHz\n",
				    dev_priv->vbt.lvds_ssc_freq);
			refclk = dev_priv->vbt.lvds_ssc_freq;
		}

		if (intel_is_dual_link_lvds(dev_priv)) {
			if (refclk == 100000)
				limit = &ilk_limits_dual_lvds_100m;
			else
				limit = &ilk_limits_dual_lvds;
		} else {
			if (refclk == 100000)
				limit = &ilk_limits_single_lvds_100m;
			else
				limit = &ilk_limits_single_lvds;
		}
	} else {
		limit = &ilk_limits_dac;
	}

	if (!crtc_state->clock_set &&
	    !g4x_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
				refclk, NULL, &crtc_state->dpll)) {
		drm_err(&dev_priv->drm,
			"Couldn't find PLL settings for mode!\n");
		return -EINVAL;
	}

	ilk_compute_dpll(crtc, crtc_state, NULL);

	if (!intel_reserve_shared_dplls(state, crtc, NULL)) {
		drm_dbg_kms(&dev_priv->drm,
			    "failed to find PLL for pipe %c\n",
			    pipe_name(crtc->pipe));
		return -EINVAL;
	}

	return 0;
}

static void intel_pch_transcoder_get_m_n(struct intel_crtc *crtc,
					 struct intel_link_m_n *m_n)
{
	struct drm_device *dev = crtc->base.dev;
	struct drm_i915_private *dev_priv = to_i915(dev);
	enum pipe pipe = crtc->pipe;

	m_n->link_m = intel_de_read(dev_priv, PCH_TRANS_LINK_M1(pipe));
	m_n->link_n = intel_de_read(dev_priv, PCH_TRANS_LINK_N1(pipe));
	m_n->gmch_m = intel_de_read(dev_priv, PCH_TRANS_DATA_M1(pipe))
		& ~TU_SIZE_MASK;
	m_n->gmch_n = intel_de_read(dev_priv, PCH_TRANS_DATA_N1(pipe));
	m_n->tu = ((intel_de_read(dev_priv, PCH_TRANS_DATA_M1(pipe))
		    & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
}

static void intel_cpu_transcoder_get_m_n(struct intel_crtc *crtc,
					 enum transcoder transcoder,
					 struct intel_link_m_n *m_n,
					 struct intel_link_m_n *m2_n2)
{
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	enum pipe pipe = crtc->pipe;

	if (INTEL_GEN(dev_priv) >= 5) {
		m_n->link_m = intel_de_read(dev_priv,
					    PIPE_LINK_M1(transcoder));
		m_n->link_n = intel_de_read(dev_priv,
					    PIPE_LINK_N1(transcoder));
		m_n->gmch_m = intel_de_read(dev_priv,
					    PIPE_DATA_M1(transcoder))
			& ~TU_SIZE_MASK;
		m_n->gmch_n = intel_de_read(dev_priv,
					    PIPE_DATA_N1(transcoder));
		m_n->tu = ((intel_de_read(dev_priv, PIPE_DATA_M1(transcoder))
			    & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;

		if (m2_n2 && transcoder_has_m2_n2(dev_priv, transcoder)) {
			m2_n2->link_m = intel_de_read(dev_priv,
						      PIPE_LINK_M2(transcoder));
			m2_n2->link_n =	intel_de_read(dev_priv,
							     PIPE_LINK_N2(transcoder));
			m2_n2->gmch_m =	intel_de_read(dev_priv,
							     PIPE_DATA_M2(transcoder))
					& ~TU_SIZE_MASK;
			m2_n2->gmch_n =	intel_de_read(dev_priv,
							     PIPE_DATA_N2(transcoder));
			m2_n2->tu = ((intel_de_read(dev_priv, PIPE_DATA_M2(transcoder))
					& TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
		}
	} else {
		m_n->link_m = intel_de_read(dev_priv, PIPE_LINK_M_G4X(pipe));
		m_n->link_n = intel_de_read(dev_priv, PIPE_LINK_N_G4X(pipe));
		m_n->gmch_m = intel_de_read(dev_priv, PIPE_DATA_M_G4X(pipe))
			& ~TU_SIZE_MASK;
		m_n->gmch_n = intel_de_read(dev_priv, PIPE_DATA_N_G4X(pipe));
		m_n->tu = ((intel_de_read(dev_priv, PIPE_DATA_M_G4X(pipe))
			    & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
	}
}

void intel_dp_get_m_n(struct intel_crtc *crtc,
		      struct intel_crtc_state *pipe_config)
{
	if (pipe_config->has_pch_encoder)
		intel_pch_transcoder_get_m_n(crtc, &pipe_config->dp_m_n);
	else
		intel_cpu_transcoder_get_m_n(crtc, pipe_config->cpu_transcoder,
					     &pipe_config->dp_m_n,
					     &pipe_config->dp_m2_n2);
}

static void ilk_get_fdi_m_n_config(struct intel_crtc *crtc,
				   struct intel_crtc_state *pipe_config)
{
	intel_cpu_transcoder_get_m_n(crtc, pipe_config->cpu_transcoder,
				     &pipe_config->fdi_m_n, NULL);
}

static void ilk_get_pfit_pos_size(struct intel_crtc_state *crtc_state,
				  u32 pos, u32 size)
{
	drm_rect_init(&crtc_state->pch_pfit.dst,
		      pos >> 16, pos & 0xffff,
		      size >> 16, size & 0xffff);
}

static void skl_get_pfit_config(struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	struct intel_crtc_scaler_state *scaler_state = &crtc_state->scaler_state;
	int id = -1;
	int i;

	/* find scaler attached to this pipe */
	for (i = 0; i < crtc->num_scalers; i++) {
		u32 ctl, pos, size;

		ctl = intel_de_read(dev_priv, SKL_PS_CTRL(crtc->pipe, i));
		if ((ctl & (PS_SCALER_EN | PS_PLANE_SEL_MASK)) != PS_SCALER_EN)
			continue;

		id = i;
		crtc_state->pch_pfit.enabled = true;

		pos = intel_de_read(dev_priv, SKL_PS_WIN_POS(crtc->pipe, i));
		size = intel_de_read(dev_priv, SKL_PS_WIN_SZ(crtc->pipe, i));

		ilk_get_pfit_pos_size(crtc_state, pos, size);

		scaler_state->scalers[i].in_use = true;
		break;
	}

	scaler_state->scaler_id = id;
	if (id >= 0)
		scaler_state->scaler_users |= (1 << SKL_CRTC_INDEX);
	else
		scaler_state->scaler_users &= ~(1 << SKL_CRTC_INDEX);
}

static void
skl_get_initial_plane_config(struct intel_crtc *crtc,
			     struct intel_initial_plane_config *plane_config)
{
	struct drm_device *dev = crtc->base.dev;
	struct drm_i915_private *dev_priv = to_i915(dev);
	struct intel_plane *plane = to_intel_plane(crtc->base.primary);
	enum plane_id plane_id = plane->id;
	enum pipe pipe;
	u32 val, base, offset, stride_mult, tiling, alpha;
	int fourcc, pixel_format;
	unsigned int aligned_height;
	struct drm_framebuffer *fb;
	struct intel_framebuffer *intel_fb;

	if (!plane->get_hw_state(plane, &pipe))
		return;

	drm_WARN_ON(dev, pipe != crtc->pipe);

	intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
	if (!intel_fb) {
		drm_dbg_kms(&dev_priv->drm, "failed to alloc fb\n");
		return;
	}

	fb = &intel_fb->base;

	fb->dev = dev;

	val = intel_de_read(dev_priv, PLANE_CTL(pipe, plane_id));

	if (INTEL_GEN(dev_priv) >= 11)
		pixel_format = val & ICL_PLANE_CTL_FORMAT_MASK;
	else
		pixel_format = val & PLANE_CTL_FORMAT_MASK;

	if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) {
		alpha = intel_de_read(dev_priv,
				      PLANE_COLOR_CTL(pipe, plane_id));
		alpha &= PLANE_COLOR_ALPHA_MASK;
	} else {
		alpha = val & PLANE_CTL_ALPHA_MASK;
	}

	fourcc = skl_format_to_fourcc(pixel_format,
				      val & PLANE_CTL_ORDER_RGBX, alpha);
	fb->format = drm_format_info(fourcc);

	tiling = val & PLANE_CTL_TILED_MASK;
	switch (tiling) {
	case PLANE_CTL_TILED_LINEAR:
		fb->modifier = DRM_FORMAT_MOD_LINEAR;
		break;
	case PLANE_CTL_TILED_X:
		plane_config->tiling = I915_TILING_X;
		fb->modifier = I915_FORMAT_MOD_X_TILED;
		break;
	case PLANE_CTL_TILED_Y:
		plane_config->tiling = I915_TILING_Y;
		if (val & PLANE_CTL_RENDER_DECOMPRESSION_ENABLE)
			fb->modifier = INTEL_GEN(dev_priv) >= 12 ?
				I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS :
				I915_FORMAT_MOD_Y_TILED_CCS;
		else if (val & PLANE_CTL_MEDIA_DECOMPRESSION_ENABLE)
			fb->modifier = I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS;
		else
			fb->modifier = I915_FORMAT_MOD_Y_TILED;
		break;
	case PLANE_CTL_TILED_YF:
		if (val & PLANE_CTL_RENDER_DECOMPRESSION_ENABLE)
			fb->modifier = I915_FORMAT_MOD_Yf_TILED_CCS;
		else
			fb->modifier = I915_FORMAT_MOD_Yf_TILED;
		break;
	default:
		MISSING_CASE(tiling);
		goto error;
	}

	/*
	 * DRM_MODE_ROTATE_ is counter clockwise to stay compatible with Xrandr
	 * while i915 HW rotation is clockwise, thats why this swapping.
	 */
	switch (val & PLANE_CTL_ROTATE_MASK) {
	case PLANE_CTL_ROTATE_0:
		plane_config->rotation = DRM_MODE_ROTATE_0;
		break;
	case PLANE_CTL_ROTATE_90:
		plane_config->rotation = DRM_MODE_ROTATE_270;
		break;
	case PLANE_CTL_ROTATE_180:
		plane_config->rotation = DRM_MODE_ROTATE_180;
		break;
	case PLANE_CTL_ROTATE_270:
		plane_config->rotation = DRM_MODE_ROTATE_90;
		break;
	}

	if (INTEL_GEN(dev_priv) >= 10 &&
	    val & PLANE_CTL_FLIP_HORIZONTAL)
		plane_config->rotation |= DRM_MODE_REFLECT_X;

	/* 90/270 degree rotation would require extra work */
	if (drm_rotation_90_or_270(plane_config->rotation))
		goto error;

	base = intel_de_read(dev_priv, PLANE_SURF(pipe, plane_id)) & 0xfffff000;
	plane_config->base = base;

	offset = intel_de_read(dev_priv, PLANE_OFFSET(pipe, plane_id));

	val = intel_de_read(dev_priv, PLANE_SIZE(pipe, plane_id));
	fb->height = ((val >> 16) & 0xffff) + 1;
	fb->width = ((val >> 0) & 0xffff) + 1;

	val = intel_de_read(dev_priv, PLANE_STRIDE(pipe, plane_id));
	stride_mult = skl_plane_stride_mult(fb, 0, DRM_MODE_ROTATE_0);
	fb->pitches[0] = (val & 0x3ff) * stride_mult;

	aligned_height = intel_fb_align_height(fb, 0, fb->height);

	plane_config->size = fb->pitches[0] * aligned_height;

	drm_dbg_kms(&dev_priv->drm,
		    "%s/%s with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
		    crtc->base.name, plane->base.name, fb->width, fb->height,
		    fb->format->cpp[0] * 8, base, fb->pitches[0],
		    plane_config->size);

	plane_config->fb = intel_fb;
	return;

error:
	kfree(intel_fb);
}

static void ilk_get_pfit_config(struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	u32 ctl, pos, size;

	ctl = intel_de_read(dev_priv, PF_CTL(crtc->pipe));
	if ((ctl & PF_ENABLE) == 0)
		return;

	crtc_state->pch_pfit.enabled = true;

	pos = intel_de_read(dev_priv, PF_WIN_POS(crtc->pipe));
	size = intel_de_read(dev_priv, PF_WIN_SZ(crtc->pipe));

	ilk_get_pfit_pos_size(crtc_state, pos, size);

	/*
	 * We currently do not free assignements of panel fitters on
	 * ivb/hsw (since we don't use the higher upscaling modes which
	 * differentiates them) so just WARN about this case for now.
	 */
	drm_WARN_ON(&dev_priv->drm, IS_GEN(dev_priv, 7) &&
		    (ctl & PF_PIPE_SEL_MASK_IVB) != PF_PIPE_SEL_IVB(crtc->pipe));
}

static bool ilk_get_pipe_config(struct intel_crtc *crtc,
				struct intel_crtc_state *pipe_config)
{
	struct drm_device *dev = crtc->base.dev;
	struct drm_i915_private *dev_priv = to_i915(dev);
	enum intel_display_power_domain power_domain;
	intel_wakeref_t wakeref;
	u32 tmp;
	bool ret;

	power_domain = POWER_DOMAIN_PIPE(crtc->pipe);
	wakeref = intel_display_power_get_if_enabled(dev_priv, power_domain);
	if (!wakeref)
		return false;

	pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
	pipe_config->shared_dpll = NULL;

	ret = false;
	tmp = intel_de_read(dev_priv, PIPECONF(crtc->pipe));
	if (!(tmp & PIPECONF_ENABLE))
		goto out;

	switch (tmp & PIPECONF_BPC_MASK) {
	case PIPECONF_6BPC:
		pipe_config->pipe_bpp = 18;
		break;
	case PIPECONF_8BPC:
		pipe_config->pipe_bpp = 24;
		break;
	case PIPECONF_10BPC:
		pipe_config->pipe_bpp = 30;
		break;
	case PIPECONF_12BPC:
		pipe_config->pipe_bpp = 36;
		break;
	default:
		break;
	}

	if (tmp & PIPECONF_COLOR_RANGE_SELECT)
		pipe_config->limited_color_range = true;

	switch (tmp & PIPECONF_OUTPUT_COLORSPACE_MASK) {
	case PIPECONF_OUTPUT_COLORSPACE_YUV601:
	case PIPECONF_OUTPUT_COLORSPACE_YUV709:
		pipe_config->output_format = INTEL_OUTPUT_FORMAT_YCBCR444;
		break;
	default:
		pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
		break;
	}

	pipe_config->gamma_mode = (tmp & PIPECONF_GAMMA_MODE_MASK_ILK) >>
		PIPECONF_GAMMA_MODE_SHIFT;

	pipe_config->csc_mode = intel_de_read(dev_priv,
					      PIPE_CSC_MODE(crtc->pipe));

	i9xx_get_pipe_color_config(pipe_config);
	intel_color_get_config(pipe_config);

	if (intel_de_read(dev_priv, PCH_TRANSCONF(crtc->pipe)) & TRANS_ENABLE) {
		struct intel_shared_dpll *pll;
		enum intel_dpll_id pll_id;

		pipe_config->has_pch_encoder = true;

		tmp = intel_de_read(dev_priv, FDI_RX_CTL(crtc->pipe));
		pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >>
					  FDI_DP_PORT_WIDTH_SHIFT) + 1;

		ilk_get_fdi_m_n_config(crtc, pipe_config);

		if (HAS_PCH_IBX(dev_priv)) {
			/*
			 * The pipe->pch transcoder and pch transcoder->pll
			 * mapping is fixed.
			 */
			pll_id = (enum intel_dpll_id) crtc->pipe;
		} else {
			tmp = intel_de_read(dev_priv, PCH_DPLL_SEL);
			if (tmp & TRANS_DPLLB_SEL(crtc->pipe))
				pll_id = DPLL_ID_PCH_PLL_B;
			else
				pll_id= DPLL_ID_PCH_PLL_A;
		}

		pipe_config->shared_dpll =
			intel_get_shared_dpll_by_id(dev_priv, pll_id);
		pll = pipe_config->shared_dpll;

		drm_WARN_ON(dev, !pll->info->funcs->get_hw_state(dev_priv, pll,
						 &pipe_config->dpll_hw_state));

		tmp = pipe_config->dpll_hw_state.dpll;
		pipe_config->pixel_multiplier =
			((tmp & PLL_REF_SDVO_HDMI_MULTIPLIER_MASK)
			 >> PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT) + 1;

		ilk_pch_clock_get(crtc, pipe_config);
	} else {
		pipe_config->pixel_multiplier = 1;
	}

	intel_get_pipe_timings(crtc, pipe_config);
	intel_get_pipe_src_size(crtc, pipe_config);

	ilk_get_pfit_config(pipe_config);

	ret = true;

out:
	intel_display_power_put(dev_priv, power_domain, wakeref);

	return ret;
}

static int hsw_crtc_compute_clock(struct intel_crtc *crtc,
				  struct intel_crtc_state *crtc_state)
{
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	struct intel_atomic_state *state =
		to_intel_atomic_state(crtc_state->uapi.state);

	if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI) ||
	    INTEL_GEN(dev_priv) >= 11) {
		struct intel_encoder *encoder =
			intel_get_crtc_new_encoder(state, crtc_state);

		if (!intel_reserve_shared_dplls(state, crtc, encoder)) {
			drm_dbg_kms(&dev_priv->drm,
				    "failed to find PLL for pipe %c\n",
				    pipe_name(crtc->pipe));
			return -EINVAL;
		}
	}

	return 0;
}

static void cnl_get_ddi_pll(struct drm_i915_private *dev_priv, enum port port,
			    struct intel_crtc_state *pipe_config)
{
	enum intel_dpll_id id;
	u32 temp;

	temp = intel_de_read(dev_priv, DPCLKA_CFGCR0) & DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(port);
	id = temp >> DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT(port);

	if (drm_WARN_ON(&dev_priv->drm, id < SKL_DPLL0 || id > SKL_DPLL2))
		return;

	pipe_config->shared_dpll = intel_get_shared_dpll_by_id(dev_priv, id);
}

static void icl_get_ddi_pll(struct drm_i915_private *dev_priv, enum port port,
			    struct intel_crtc_state *pipe_config)
{
	enum phy phy = intel_port_to_phy(dev_priv, port);
	enum icl_port_dpll_id port_dpll_id;
	enum intel_dpll_id id;
	u32 temp;

	if (intel_phy_is_combo(dev_priv, phy)) {
		u32 mask, shift;

		if (IS_ROCKETLAKE(dev_priv)) {
			mask = RKL_DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(phy);
			shift = RKL_DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT(phy);
		} else {
			mask = ICL_DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(phy);
			shift = ICL_DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT(phy);
		}

		temp = intel_de_read(dev_priv, ICL_DPCLKA_CFGCR0) & mask;
		id = temp >> shift;
		port_dpll_id = ICL_PORT_DPLL_DEFAULT;
	} else if (intel_phy_is_tc(dev_priv, phy)) {
		u32 clk_sel = intel_de_read(dev_priv, DDI_CLK_SEL(port)) & DDI_CLK_SEL_MASK;

		if (clk_sel == DDI_CLK_SEL_MG) {
			id = icl_tc_port_to_pll_id(intel_port_to_tc(dev_priv,
								    port));
			port_dpll_id = ICL_PORT_DPLL_MG_PHY;
		} else {
			drm_WARN_ON(&dev_priv->drm,
				    clk_sel < DDI_CLK_SEL_TBT_162);
			id = DPLL_ID_ICL_TBTPLL;
			port_dpll_id = ICL_PORT_DPLL_DEFAULT;
		}
	} else {
		drm_WARN(&dev_priv->drm, 1, "Invalid port %x\n", port);
		return;
	}

	pipe_config->icl_port_dplls[port_dpll_id].pll =
		intel_get_shared_dpll_by_id(dev_priv, id);

	icl_set_active_port_dpll(pipe_config, port_dpll_id);
}

static void bxt_get_ddi_pll(struct drm_i915_private *dev_priv,
				enum port port,
				struct intel_crtc_state *pipe_config)
{
	enum intel_dpll_id id;

	switch (port) {
	case PORT_A:
		id = DPLL_ID_SKL_DPLL0;
		break;
	case PORT_B:
		id = DPLL_ID_SKL_DPLL1;
		break;
	case PORT_C:
		id = DPLL_ID_SKL_DPLL2;
		break;
	default:
		drm_err(&dev_priv->drm, "Incorrect port type\n");
		return;
	}

	pipe_config->shared_dpll = intel_get_shared_dpll_by_id(dev_priv, id);
}

static void skl_get_ddi_pll(struct drm_i915_private *dev_priv, enum port port,
			    struct intel_crtc_state *pipe_config)
{
	enum intel_dpll_id id;
	u32 temp;

	temp = intel_de_read(dev_priv, DPLL_CTRL2) & DPLL_CTRL2_DDI_CLK_SEL_MASK(port);
	id = temp >> (port * 3 + 1);

	if (drm_WARN_ON(&dev_priv->drm, id < SKL_DPLL0 || id > SKL_DPLL3))
		return;

	pipe_config->shared_dpll = intel_get_shared_dpll_by_id(dev_priv, id);
}

static void hsw_get_ddi_pll(struct drm_i915_private *dev_priv, enum port port,
			    struct intel_crtc_state *pipe_config)
{
	enum intel_dpll_id id;
	u32 ddi_pll_sel = intel_de_read(dev_priv, PORT_CLK_SEL(port));

	switch (ddi_pll_sel) {
	case PORT_CLK_SEL_WRPLL1:
		id = DPLL_ID_WRPLL1;
		break;
	case PORT_CLK_SEL_WRPLL2:
		id = DPLL_ID_WRPLL2;
		break;
	case PORT_CLK_SEL_SPLL:
		id = DPLL_ID_SPLL;
		break;
	case PORT_CLK_SEL_LCPLL_810:
		id = DPLL_ID_LCPLL_810;
		break;
	case PORT_CLK_SEL_LCPLL_1350:
		id = DPLL_ID_LCPLL_1350;
		break;
	case PORT_CLK_SEL_LCPLL_2700:
		id = DPLL_ID_LCPLL_2700;
		break;
	default:
		MISSING_CASE(ddi_pll_sel);
		fallthrough;
	case PORT_CLK_SEL_NONE:
		return;
	}

	pipe_config->shared_dpll = intel_get_shared_dpll_by_id(dev_priv, id);
}

static bool hsw_get_transcoder_state(struct intel_crtc *crtc,
				     struct intel_crtc_state *pipe_config,
				     u64 *power_domain_mask,
				     intel_wakeref_t *wakerefs)
{
	struct drm_device *dev = crtc->base.dev;
	struct drm_i915_private *dev_priv = to_i915(dev);
	enum intel_display_power_domain power_domain;
	unsigned long panel_transcoder_mask = BIT(TRANSCODER_EDP);
	unsigned long enabled_panel_transcoders = 0;
	enum transcoder panel_transcoder;
	intel_wakeref_t wf;
	u32 tmp;

	if (INTEL_GEN(dev_priv) >= 11)
		panel_transcoder_mask |=
			BIT(TRANSCODER_DSI_0) | BIT(TRANSCODER_DSI_1);

	/*
	 * The pipe->transcoder mapping is fixed with the exception of the eDP
	 * and DSI transcoders handled below.
	 */
	pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;

	/*
	 * XXX: Do intel_display_power_get_if_enabled before reading this (for
	 * consistency and less surprising code; it's in always on power).
	 */
	for_each_cpu_transcoder_masked(dev_priv, panel_transcoder,
				       panel_transcoder_mask) {
		bool force_thru = false;
		enum pipe trans_pipe;

		tmp = intel_de_read(dev_priv,
				    TRANS_DDI_FUNC_CTL(panel_transcoder));
		if (!(tmp & TRANS_DDI_FUNC_ENABLE))
			continue;

		/*
		 * Log all enabled ones, only use the first one.
		 *
		 * FIXME: This won't work for two separate DSI displays.
		 */
		enabled_panel_transcoders |= BIT(panel_transcoder);
		if (enabled_panel_transcoders != BIT(panel_transcoder))
			continue;

		switch (tmp & TRANS_DDI_EDP_INPUT_MASK) {
		default:
			drm_WARN(dev, 1,
				 "unknown pipe linked to transcoder %s\n",
				 transcoder_name(panel_transcoder));
			fallthrough;
		case TRANS_DDI_EDP_INPUT_A_ONOFF:
			force_thru = true;
			fallthrough;
		case TRANS_DDI_EDP_INPUT_A_ON:
			trans_pipe = PIPE_A;
			break;
		case TRANS_DDI_EDP_INPUT_B_ONOFF:
			trans_pipe = PIPE_B;
			break;
		case TRANS_DDI_EDP_INPUT_C_ONOFF:
			trans_pipe = PIPE_C;
			break;
		case TRANS_DDI_EDP_INPUT_D_ONOFF:
			trans_pipe = PIPE_D;
			break;
		}

		if (trans_pipe == crtc->pipe) {
			pipe_config->cpu_transcoder = panel_transcoder;
			pipe_config->pch_pfit.force_thru = force_thru;
		}
	}

	/*
	 * Valid combos: none, eDP, DSI0, DSI1, DSI0+DSI1
	 */
	drm_WARN_ON(dev, (enabled_panel_transcoders & BIT(TRANSCODER_EDP)) &&
		    enabled_panel_transcoders != BIT(TRANSCODER_EDP));

	power_domain = POWER_DOMAIN_TRANSCODER(pipe_config->cpu_transcoder);
	drm_WARN_ON(dev, *power_domain_mask & BIT_ULL(power_domain));

	wf = intel_display_power_get_if_enabled(dev_priv, power_domain);
	if (!wf)
		return false;

	wakerefs[power_domain] = wf;
	*power_domain_mask |= BIT_ULL(power_domain);

	tmp = intel_de_read(dev_priv, PIPECONF(pipe_config->cpu_transcoder));

	return tmp & PIPECONF_ENABLE;
}

static bool bxt_get_dsi_transcoder_state(struct intel_crtc *crtc,
					 struct intel_crtc_state *pipe_config,
					 u64 *power_domain_mask,
					 intel_wakeref_t *wakerefs)
{
	struct drm_device *dev = crtc->base.dev;
	struct drm_i915_private *dev_priv = to_i915(dev);
	enum intel_display_power_domain power_domain;
	enum transcoder cpu_transcoder;
	intel_wakeref_t wf;
	enum port port;
	u32 tmp;

	for_each_port_masked(port, BIT(PORT_A) | BIT(PORT_C)) {
		if (port == PORT_A)
			cpu_transcoder = TRANSCODER_DSI_A;
		else
			cpu_transcoder = TRANSCODER_DSI_C;

		power_domain = POWER_DOMAIN_TRANSCODER(cpu_transcoder);
		drm_WARN_ON(dev, *power_domain_mask & BIT_ULL(power_domain));

		wf = intel_display_power_get_if_enabled(dev_priv, power_domain);
		if (!wf)
			continue;

		wakerefs[power_domain] = wf;
		*power_domain_mask |= BIT_ULL(power_domain);

		/*
		 * The PLL needs to be enabled with a valid divider
		 * configuration, otherwise accessing DSI registers will hang
		 * the machine. See BSpec North Display Engine
		 * registers/MIPI[BXT]. We can break out here early, since we
		 * need the same DSI PLL to be enabled for both DSI ports.
		 */
		if (!bxt_dsi_pll_is_enabled(dev_priv))
			break;

		/* XXX: this works for video mode only */
		tmp = intel_de_read(dev_priv, BXT_MIPI_PORT_CTRL(port));
		if (!(tmp & DPI_ENABLE))
			continue;

		tmp = intel_de_read(dev_priv, MIPI_CTRL(port));
		if ((tmp & BXT_PIPE_SELECT_MASK) != BXT_PIPE_SELECT(crtc->pipe))
			continue;

		pipe_config->cpu_transcoder = cpu_transcoder;
		break;
	}

	return transcoder_is_dsi(pipe_config->cpu_transcoder);
}

static void hsw_get_ddi_port_state(struct intel_crtc *crtc,
				   struct intel_crtc_state *pipe_config)
{
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
	struct intel_shared_dpll *pll;
	enum port port;
	u32 tmp;

	if (transcoder_is_dsi(cpu_transcoder)) {
		port = (cpu_transcoder == TRANSCODER_DSI_A) ?
						PORT_A : PORT_B;
	} else {
		tmp = intel_de_read(dev_priv,
				    TRANS_DDI_FUNC_CTL(cpu_transcoder));
		if (INTEL_GEN(dev_priv) >= 12)
			port = TGL_TRANS_DDI_FUNC_CTL_VAL_TO_PORT(tmp);
		else
			port = TRANS_DDI_FUNC_CTL_VAL_TO_PORT(tmp);
	}

	if (INTEL_GEN(dev_priv) >= 11)
		icl_get_ddi_pll(dev_priv, port, pipe_config);
	else if (IS_CANNONLAKE(dev_priv))
		cnl_get_ddi_pll(dev_priv, port, pipe_config);
	else if (IS_GEN9_BC(dev_priv))
		skl_get_ddi_pll(dev_priv, port, pipe_config);
	else if (IS_GEN9_LP(dev_priv))
		bxt_get_ddi_pll(dev_priv, port, pipe_config);
	else
		hsw_get_ddi_pll(dev_priv, port, pipe_config);

	pll = pipe_config->shared_dpll;
	if (pll) {
		drm_WARN_ON(&dev_priv->drm,
			    !pll->info->funcs->get_hw_state(dev_priv, pll,
						&pipe_config->dpll_hw_state));
	}

	/*
	 * Haswell has only FDI/PCH transcoder A. It is which is connected to
	 * DDI E. So just check whether this pipe is wired to DDI E and whether
	 * the PCH transcoder is on.
	 */
	if (INTEL_GEN(dev_priv) < 9 &&
	    (port == PORT_E) && intel_de_read(dev_priv, LPT_TRANSCONF) & TRANS_ENABLE) {
		pipe_config->has_pch_encoder = true;

		tmp = intel_de_read(dev_priv, FDI_RX_CTL(PIPE_A));
		pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >>
					  FDI_DP_PORT_WIDTH_SHIFT) + 1;

		ilk_get_fdi_m_n_config(crtc, pipe_config);
	}
}

static bool hsw_get_pipe_config(struct intel_crtc *crtc,
				struct intel_crtc_state *pipe_config)
{
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	intel_wakeref_t wakerefs[POWER_DOMAIN_NUM], wf;
	enum intel_display_power_domain power_domain;
	u64 power_domain_mask;
	bool active;
	u32 tmp;

	pipe_config->master_transcoder = INVALID_TRANSCODER;

	power_domain = POWER_DOMAIN_PIPE(crtc->pipe);
	wf = intel_display_power_get_if_enabled(dev_priv, power_domain);
	if (!wf)
		return false;

	wakerefs[power_domain] = wf;
	power_domain_mask = BIT_ULL(power_domain);

	pipe_config->shared_dpll = NULL;

	active = hsw_get_transcoder_state(crtc, pipe_config,
					  &power_domain_mask, wakerefs);

	if (IS_GEN9_LP(dev_priv) &&
	    bxt_get_dsi_transcoder_state(crtc, pipe_config,
					 &power_domain_mask, wakerefs)) {
		drm_WARN_ON(&dev_priv->drm, active);
		active = true;
	}

	if (!active)
		goto out;

	if (!transcoder_is_dsi(pipe_config->cpu_transcoder) ||
	    INTEL_GEN(dev_priv) >= 11) {
		hsw_get_ddi_port_state(crtc, pipe_config);
		intel_get_pipe_timings(crtc, pipe_config);
	}

	intel_get_pipe_src_size(crtc, pipe_config);

	if (IS_HASWELL(dev_priv)) {
		u32 tmp = intel_de_read(dev_priv,
					PIPECONF(pipe_config->cpu_transcoder));

		if (tmp & PIPECONF_OUTPUT_COLORSPACE_YUV_HSW)
			pipe_config->output_format = INTEL_OUTPUT_FORMAT_YCBCR444;
		else
			pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
	} else {
		pipe_config->output_format =
			bdw_get_pipemisc_output_format(crtc);

		/*
		 * Currently there is no interface defined to
		 * check user preference between RGB/YCBCR444
		 * or YCBCR420. So the only possible case for
		 * YCBCR444 usage is driving YCBCR420 output
		 * with LSPCON, when pipe is configured for
		 * YCBCR444 output and LSPCON takes care of
		 * downsampling it.
		 */
		pipe_config->lspcon_downsampling =
			pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR444;
	}

	pipe_config->gamma_mode = intel_de_read(dev_priv,
						GAMMA_MODE(crtc->pipe));

	pipe_config->csc_mode = intel_de_read(dev_priv,
					      PIPE_CSC_MODE(crtc->pipe));

	if (INTEL_GEN(dev_priv) >= 9) {
		tmp = intel_de_read(dev_priv, SKL_BOTTOM_COLOR(crtc->pipe));

		if (tmp & SKL_BOTTOM_COLOR_GAMMA_ENABLE)
			pipe_config->gamma_enable = true;

		if (tmp & SKL_BOTTOM_COLOR_CSC_ENABLE)
			pipe_config->csc_enable = true;
	} else {
		i9xx_get_pipe_color_config(pipe_config);
	}

	intel_color_get_config(pipe_config);

	tmp = intel_de_read(dev_priv, WM_LINETIME(crtc->pipe));
	pipe_config->linetime = REG_FIELD_GET(HSW_LINETIME_MASK, tmp);
	if (IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv))
		pipe_config->ips_linetime =
			REG_FIELD_GET(HSW_IPS_LINETIME_MASK, tmp);

	power_domain = POWER_DOMAIN_PIPE_PANEL_FITTER(crtc->pipe);
	drm_WARN_ON(&dev_priv->drm, power_domain_mask & BIT_ULL(power_domain));

	wf = intel_display_power_get_if_enabled(dev_priv, power_domain);
	if (wf) {
		wakerefs[power_domain] = wf;
		power_domain_mask |= BIT_ULL(power_domain);

		if (INTEL_GEN(dev_priv) >= 9)
			skl_get_pfit_config(pipe_config);
		else
			ilk_get_pfit_config(pipe_config);
	}

	if (hsw_crtc_supports_ips(crtc)) {
		if (IS_HASWELL(dev_priv))
			pipe_config->ips_enabled = intel_de_read(dev_priv,
								 IPS_CTL) & IPS_ENABLE;
		else {
			/*
			 * We cannot readout IPS state on broadwell, set to
			 * true so we can set it to a defined state on first
			 * commit.
			 */
			pipe_config->ips_enabled = true;
		}
	}

	if (pipe_config->cpu_transcoder != TRANSCODER_EDP &&
	    !transcoder_is_dsi(pipe_config->cpu_transcoder)) {
		pipe_config->pixel_multiplier =
			intel_de_read(dev_priv,
				      PIPE_MULT(pipe_config->cpu_transcoder)) + 1;
	} else {
		pipe_config->pixel_multiplier = 1;
	}

out:
	for_each_power_domain(power_domain, power_domain_mask)
		intel_display_power_put(dev_priv,
					power_domain, wakerefs[power_domain]);

	return active;
}

static u32 intel_cursor_base(const struct intel_plane_state *plane_state)
{
	struct drm_i915_private *dev_priv =
		to_i915(plane_state->uapi.plane->dev);
	const struct drm_framebuffer *fb = plane_state->hw.fb;
	const struct drm_i915_gem_object *obj = intel_fb_obj(fb);
	u32 base;

	if (INTEL_INFO(dev_priv)->display.cursor_needs_physical)
		base = sg_dma_address(obj->mm.pages->sgl);
	else
		base = intel_plane_ggtt_offset(plane_state);

	return base + plane_state->color_plane[0].offset;
}

static u32 intel_cursor_position(const struct intel_plane_state *plane_state)
{
	int x = plane_state->uapi.dst.x1;
	int y = plane_state->uapi.dst.y1;
	u32 pos = 0;

	if (x < 0) {
		pos |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
		x = -x;
	}
	pos |= x << CURSOR_X_SHIFT;

	if (y < 0) {
		pos |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT;
		y = -y;
	}
	pos |= y << CURSOR_Y_SHIFT;

	return pos;
}

static bool intel_cursor_size_ok(const struct intel_plane_state *plane_state)
{
	const struct drm_mode_config *config =
		&plane_state->uapi.plane->dev->mode_config;
	int width = drm_rect_width(&plane_state->uapi.dst);
	int height = drm_rect_height(&plane_state->uapi.dst);

	return width > 0 && width <= config->cursor_width &&
		height > 0 && height <= config->cursor_height;
}

static int intel_cursor_check_surface(struct intel_plane_state *plane_state)
{
	struct drm_i915_private *dev_priv =
		to_i915(plane_state->uapi.plane->dev);
	unsigned int rotation = plane_state->hw.rotation;
	int src_x, src_y;
	u32 offset;
	int ret;

	ret = intel_plane_compute_gtt(plane_state);
	if (ret)
		return ret;

	if (!plane_state->uapi.visible)
		return 0;

	src_x = plane_state->uapi.src.x1 >> 16;
	src_y = plane_state->uapi.src.y1 >> 16;

	intel_add_fb_offsets(&src_x, &src_y, plane_state, 0);
	offset = intel_plane_compute_aligned_offset(&src_x, &src_y,
						    plane_state, 0);

	if (src_x != 0 || src_y != 0) {
		drm_dbg_kms(&dev_priv->drm,
			    "Arbitrary cursor panning not supported\n");
		return -EINVAL;
	}

	/*
	 * Put the final coordinates back so that the src
	 * coordinate checks will see the right values.
	 */
	drm_rect_translate_to(&plane_state->uapi.src,
			      src_x << 16, src_y << 16);

	/* ILK+ do this automagically in hardware */
	if (HAS_GMCH(dev_priv) && rotation & DRM_MODE_ROTATE_180) {
		const struct drm_framebuffer *fb = plane_state->hw.fb;
		int src_w = drm_rect_width(&plane_state->uapi.src) >> 16;
		int src_h = drm_rect_height(&plane_state->uapi.src) >> 16;

		offset += (src_h * src_w - 1) * fb->format->cpp[0];
	}

	plane_state->color_plane[0].offset = offset;
	plane_state->color_plane[0].x = src_x;
	plane_state->color_plane[0].y = src_y;

	return 0;
}

static int intel_check_cursor(struct intel_crtc_state *crtc_state,
			      struct intel_plane_state *plane_state)
{
	const struct drm_framebuffer *fb = plane_state->hw.fb;
	struct drm_i915_private *i915 = to_i915(plane_state->uapi.plane->dev);
	int ret;

	if (fb && fb->modifier != DRM_FORMAT_MOD_LINEAR) {
		drm_dbg_kms(&i915->drm, "cursor cannot be tiled\n");
		return -EINVAL;
	}

	ret = drm_atomic_helper_check_plane_state(&plane_state->uapi,
						  &crtc_state->uapi,
						  DRM_PLANE_HELPER_NO_SCALING,
						  DRM_PLANE_HELPER_NO_SCALING,
						  true, true);
	if (ret)
		return ret;

	/* Use the unclipped src/dst rectangles, which we program to hw */
	plane_state->uapi.src = drm_plane_state_src(&plane_state->uapi);
	plane_state->uapi.dst = drm_plane_state_dest(&plane_state->uapi);

	ret = intel_cursor_check_surface(plane_state);
	if (ret)
		return ret;

	if (!plane_state->uapi.visible)
		return 0;

	ret = intel_plane_check_src_coordinates(plane_state);
	if (ret)
		return ret;

	return 0;
}

static unsigned int
i845_cursor_max_stride(struct intel_plane *plane,
		       u32 pixel_format, u64 modifier,
		       unsigned int rotation)
{
	return 2048;
}

static u32 i845_cursor_ctl_crtc(const struct intel_crtc_state *crtc_state)
{
	u32 cntl = 0;

	if (crtc_state->gamma_enable)
		cntl |= CURSOR_GAMMA_ENABLE;

	return cntl;
}

static u32 i845_cursor_ctl(const struct intel_crtc_state *crtc_state,
			   const struct intel_plane_state *plane_state)
{
	return CURSOR_ENABLE |
		CURSOR_FORMAT_ARGB |
		CURSOR_STRIDE(plane_state->color_plane[0].stride);
}

static bool i845_cursor_size_ok(const struct intel_plane_state *plane_state)
{
	int width = drm_rect_width(&plane_state->uapi.dst);

	/*
	 * 845g/865g are only limited by the width of their cursors,
	 * the height is arbitrary up to the precision of the register.
	 */
	return intel_cursor_size_ok(plane_state) && IS_ALIGNED(width, 64);
}

static int i845_check_cursor(struct intel_crtc_state *crtc_state,
			     struct intel_plane_state *plane_state)
{
	const struct drm_framebuffer *fb = plane_state->hw.fb;
	struct drm_i915_private *i915 = to_i915(plane_state->uapi.plane->dev);
	int ret;

	ret = intel_check_cursor(crtc_state, plane_state);
	if (ret)
		return ret;

	/* if we want to turn off the cursor ignore width and height */
	if (!fb)
		return 0;

	/* Check for which cursor types we support */
	if (!i845_cursor_size_ok(plane_state)) {
		drm_dbg_kms(&i915->drm,
			    "Cursor dimension %dx%d not supported\n",
			    drm_rect_width(&plane_state->uapi.dst),
			    drm_rect_height(&plane_state->uapi.dst));
		return -EINVAL;
	}

	drm_WARN_ON(&i915->drm, plane_state->uapi.visible &&
		    plane_state->color_plane[0].stride != fb->pitches[0]);

	switch (fb->pitches[0]) {
	case 256:
	case 512:
	case 1024:
	case 2048:
		break;
	default:
		 drm_dbg_kms(&i915->drm, "Invalid cursor stride (%u)\n",
			     fb->pitches[0]);
		return -EINVAL;
	}

	plane_state->ctl = i845_cursor_ctl(crtc_state, plane_state);

	return 0;
}

static void i845_update_cursor(struct intel_plane *plane,
			       const struct intel_crtc_state *crtc_state,
			       const struct intel_plane_state *plane_state)
{
	struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
	u32 cntl = 0, base = 0, pos = 0, size = 0;
	unsigned long irqflags;

	if (plane_state && plane_state->uapi.visible) {
		unsigned int width = drm_rect_width(&plane_state->uapi.dst);
		unsigned int height = drm_rect_height(&plane_state->uapi.dst);

		cntl = plane_state->ctl |
			i845_cursor_ctl_crtc(crtc_state);

		size = (height << 12) | width;

		base = intel_cursor_base(plane_state);
		pos = intel_cursor_position(plane_state);
	}

	spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);

	/* On these chipsets we can only modify the base/size/stride
	 * whilst the cursor is disabled.
	 */
	if (plane->cursor.base != base ||
	    plane->cursor.size != size ||
	    plane->cursor.cntl != cntl) {
		intel_de_write_fw(dev_priv, CURCNTR(PIPE_A), 0);
		intel_de_write_fw(dev_priv, CURBASE(PIPE_A), base);
		intel_de_write_fw(dev_priv, CURSIZE, size);
		intel_de_write_fw(dev_priv, CURPOS(PIPE_A), pos);
		intel_de_write_fw(dev_priv, CURCNTR(PIPE_A), cntl);

		plane->cursor.base = base;
		plane->cursor.size = size;
		plane->cursor.cntl = cntl;
	} else {
		intel_de_write_fw(dev_priv, CURPOS(PIPE_A), pos);
	}

	spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
}

static void i845_disable_cursor(struct intel_plane *plane,
				const struct intel_crtc_state *crtc_state)
{
	i845_update_cursor(plane, crtc_state, NULL);
}

static bool i845_cursor_get_hw_state(struct intel_plane *plane,
				     enum pipe *pipe)
{
	struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
	enum intel_display_power_domain power_domain;
	intel_wakeref_t wakeref;
	bool ret;

	power_domain = POWER_DOMAIN_PIPE(PIPE_A);
	wakeref = intel_display_power_get_if_enabled(dev_priv, power_domain);
	if (!wakeref)
		return false;

	ret = intel_de_read(dev_priv, CURCNTR(PIPE_A)) & CURSOR_ENABLE;

	*pipe = PIPE_A;

	intel_display_power_put(dev_priv, power_domain, wakeref);

	return ret;
}

static unsigned int
i9xx_cursor_max_stride(struct intel_plane *plane,
		       u32 pixel_format, u64 modifier,
		       unsigned int rotation)
{
	return plane->base.dev->mode_config.cursor_width * 4;
}

static u32 i9xx_cursor_ctl_crtc(const struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	u32 cntl = 0;

	if (INTEL_GEN(dev_priv) >= 11)
		return cntl;

	if (crtc_state->gamma_enable)
		cntl = MCURSOR_GAMMA_ENABLE;

	if (crtc_state->csc_enable)
		cntl |= MCURSOR_PIPE_CSC_ENABLE;

	if (INTEL_GEN(dev_priv) < 5 && !IS_G4X(dev_priv))
		cntl |= MCURSOR_PIPE_SELECT(crtc->pipe);

	return cntl;
}

static u32 i9xx_cursor_ctl(const struct intel_crtc_state *crtc_state,
			   const struct intel_plane_state *plane_state)
{
	struct drm_i915_private *dev_priv =
		to_i915(plane_state->uapi.plane->dev);
	u32 cntl = 0;

	if (IS_GEN(dev_priv, 6) || IS_IVYBRIDGE(dev_priv))
		cntl |= MCURSOR_TRICKLE_FEED_DISABLE;

	switch (drm_rect_width(&plane_state->uapi.dst)) {
	case 64:
		cntl |= MCURSOR_MODE_64_ARGB_AX;
		break;
	case 128:
		cntl |= MCURSOR_MODE_128_ARGB_AX;
		break;
	case 256:
		cntl |= MCURSOR_MODE_256_ARGB_AX;
		break;
	default:
		MISSING_CASE(drm_rect_width(&plane_state->uapi.dst));
		return 0;
	}

	if (plane_state->hw.rotation & DRM_MODE_ROTATE_180)
		cntl |= MCURSOR_ROTATE_180;

	return cntl;
}

static bool i9xx_cursor_size_ok(const struct intel_plane_state *plane_state)
{
	struct drm_i915_private *dev_priv =
		to_i915(plane_state->uapi.plane->dev);
	int width = drm_rect_width(&plane_state->uapi.dst);
	int height = drm_rect_height(&plane_state->uapi.dst);

	if (!intel_cursor_size_ok(plane_state))
		return false;

	/* Cursor width is limited to a few power-of-two sizes */
	switch (width) {
	case 256:
	case 128:
	case 64:
		break;
	default:
		return false;
	}

	/*
	 * IVB+ have CUR_FBC_CTL which allows an arbitrary cursor
	 * height from 8 lines up to the cursor width, when the
	 * cursor is not rotated. Everything else requires square
	 * cursors.
	 */
	if (HAS_CUR_FBC(dev_priv) &&
	    plane_state->hw.rotation & DRM_MODE_ROTATE_0) {
		if (height < 8 || height > width)
			return false;
	} else {
		if (height != width)
			return false;
	}

	return true;
}

static int i9xx_check_cursor(struct intel_crtc_state *crtc_state,
			     struct intel_plane_state *plane_state)
{
	struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane);
	struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
	const struct drm_framebuffer *fb = plane_state->hw.fb;
	enum pipe pipe = plane->pipe;
	int ret;

	ret = intel_check_cursor(crtc_state, plane_state);
	if (ret)
		return ret;

	/* if we want to turn off the cursor ignore width and height */
	if (!fb)
		return 0;

	/* Check for which cursor types we support */
	if (!i9xx_cursor_size_ok(plane_state)) {
		drm_dbg(&dev_priv->drm,
			"Cursor dimension %dx%d not supported\n",
			drm_rect_width(&plane_state->uapi.dst),
			drm_rect_height(&plane_state->uapi.dst));
		return -EINVAL;
	}

	drm_WARN_ON(&dev_priv->drm, plane_state->uapi.visible &&
		    plane_state->color_plane[0].stride != fb->pitches[0]);

	if (fb->pitches[0] !=
	    drm_rect_width(&plane_state->uapi.dst) * fb->format->cpp[0]) {
		drm_dbg_kms(&dev_priv->drm,
			    "Invalid cursor stride (%u) (cursor width %d)\n",
			    fb->pitches[0],
			    drm_rect_width(&plane_state->uapi.dst));
		return -EINVAL;
	}

	/*
	 * There's something wrong with the cursor on CHV pipe C.
	 * If it straddles the left edge of the screen then
	 * moving it away from the edge or disabling it often
	 * results in a pipe underrun, and often that can lead to
	 * dead pipe (constant underrun reported, and it scans
	 * out just a solid color). To recover from that, the
	 * display power well must be turned off and on again.
	 * Refuse the put the cursor into that compromised position.
	 */
	if (IS_CHERRYVIEW(dev_priv) && pipe == PIPE_C &&
	    plane_state->uapi.visible && plane_state->uapi.dst.x1 < 0) {
		drm_dbg_kms(&dev_priv->drm,
			    "CHV cursor C not allowed to straddle the left screen edge\n");
		return -EINVAL;
	}

	plane_state->ctl = i9xx_cursor_ctl(crtc_state, plane_state);

	return 0;
}

static void i9xx_update_cursor(struct intel_plane *plane,
			       const struct intel_crtc_state *crtc_state,
			       const struct intel_plane_state *plane_state)
{
	struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
	enum pipe pipe = plane->pipe;
	u32 cntl = 0, base = 0, pos = 0, fbc_ctl = 0;
	unsigned long irqflags;

	if (plane_state && plane_state->uapi.visible) {
		unsigned width = drm_rect_width(&plane_state->uapi.dst);
		unsigned height = drm_rect_height(&plane_state->uapi.dst);

		cntl = plane_state->ctl |
			i9xx_cursor_ctl_crtc(crtc_state);

		if (width != height)
			fbc_ctl = CUR_FBC_CTL_EN | (height - 1);

		base = intel_cursor_base(plane_state);
		pos = intel_cursor_position(plane_state);
	}

	spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);

	/*
	 * On some platforms writing CURCNTR first will also
	 * cause CURPOS to be armed by the CURBASE write.
	 * Without the CURCNTR write the CURPOS write would
	 * arm itself. Thus we always update CURCNTR before
	 * CURPOS.
	 *
	 * On other platforms CURPOS always requires the
	 * CURBASE write to arm the update. Additonally
	 * a write to any of the cursor register will cancel
	 * an already armed cursor update. Thus leaving out
	 * the CURBASE write after CURPOS could lead to a
	 * cursor that doesn't appear to move, or even change
	 * shape. Thus we always write CURBASE.
	 *
	 * The other registers are armed by by the CURBASE write
	 * except when the plane is getting enabled at which time
	 * the CURCNTR write arms the update.
	 */

	if (INTEL_GEN(dev_priv) >= 9)
		skl_write_cursor_wm(plane, crtc_state);

	if (plane->cursor.base != base ||
	    plane->cursor.size != fbc_ctl ||
	    plane->cursor.cntl != cntl) {
		if (HAS_CUR_FBC(dev_priv))
			intel_de_write_fw(dev_priv, CUR_FBC_CTL(pipe),
					  fbc_ctl);
		intel_de_write_fw(dev_priv, CURCNTR(pipe), cntl);
		intel_de_write_fw(dev_priv, CURPOS(pipe), pos);
		intel_de_write_fw(dev_priv, CURBASE(pipe), base);

		plane->cursor.base = base;
		plane->cursor.size = fbc_ctl;
		plane->cursor.cntl = cntl;
	} else {
		intel_de_write_fw(dev_priv, CURPOS(pipe), pos);
		intel_de_write_fw(dev_priv, CURBASE(pipe), base);
	}

	spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
}

static void i9xx_disable_cursor(struct intel_plane *plane,
				const struct intel_crtc_state *crtc_state)
{
	i9xx_update_cursor(plane, crtc_state, NULL);
}

static bool i9xx_cursor_get_hw_state(struct intel_plane *plane,
				     enum pipe *pipe)
{
	struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
	enum intel_display_power_domain power_domain;
	intel_wakeref_t wakeref;
	bool ret;
	u32 val;

	/*
	 * Not 100% correct for planes that can move between pipes,
	 * but that's only the case for gen2-3 which don't have any
	 * display power wells.
	 */
	power_domain = POWER_DOMAIN_PIPE(plane->pipe);
	wakeref = intel_display_power_get_if_enabled(dev_priv, power_domain);
	if (!wakeref)
		return false;

	val = intel_de_read(dev_priv, CURCNTR(plane->pipe));

	ret = val & MCURSOR_MODE;

	if (INTEL_GEN(dev_priv) >= 5 || IS_G4X(dev_priv))
		*pipe = plane->pipe;
	else
		*pipe = (val & MCURSOR_PIPE_SELECT_MASK) >>
			MCURSOR_PIPE_SELECT_SHIFT;

	intel_display_power_put(dev_priv, power_domain, wakeref);

	return ret;
}

/* VESA 640x480x72Hz mode to set on the pipe */
static const struct drm_display_mode load_detect_mode = {
	DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664,
		 704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
};

struct drm_framebuffer *
intel_framebuffer_create(struct drm_i915_gem_object *obj,
			 struct drm_mode_fb_cmd2 *mode_cmd)
{
	struct intel_framebuffer *intel_fb;
	int ret;

	intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
	if (!intel_fb)
		return ERR_PTR(-ENOMEM);

	ret = intel_framebuffer_init(intel_fb, obj, mode_cmd);
	if (ret)
		goto err;

	return &intel_fb->base;

err:
	kfree(intel_fb);
	return ERR_PTR(ret);
}

static int intel_modeset_disable_planes(struct drm_atomic_state *state,
					struct drm_crtc *crtc)
{
	struct drm_plane *plane;
	struct drm_plane_state *plane_state;
	int ret, i;

	ret = drm_atomic_add_affected_planes(state, crtc);
	if (ret)
		return ret;

	for_each_new_plane_in_state(state, plane, plane_state, i) {
		if (plane_state->crtc != crtc)
			continue;

		ret = drm_atomic_set_crtc_for_plane(plane_state, NULL);
		if (ret)
			return ret;

		drm_atomic_set_fb_for_plane(plane_state, NULL);
	}

	return 0;
}

int intel_get_load_detect_pipe(struct drm_connector *connector,
			       struct intel_load_detect_pipe *old,
			       struct drm_modeset_acquire_ctx *ctx)
{
	struct intel_crtc *intel_crtc;
	struct intel_encoder *intel_encoder =
		intel_attached_encoder(to_intel_connector(connector));
	struct drm_crtc *possible_crtc;
	struct drm_encoder *encoder = &intel_encoder->base;
	struct drm_crtc *crtc = NULL;
	struct drm_device *dev = encoder->dev;
	struct drm_i915_private *dev_priv = to_i915(dev);
	struct drm_mode_config *config = &dev->mode_config;
	struct drm_atomic_state *state = NULL, *restore_state = NULL;
	struct drm_connector_state *connector_state;
	struct intel_crtc_state *crtc_state;
	int ret, i = -1;

	drm_dbg_kms(&dev_priv->drm, "[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
		    connector->base.id, connector->name,
		    encoder->base.id, encoder->name);

	old->restore_state = NULL;

	drm_WARN_ON(dev, !drm_modeset_is_locked(&config->connection_mutex));

	/*
	 * Algorithm gets a little messy:
	 *
	 *   - if the connector already has an assigned crtc, use it (but make
	 *     sure it's on first)
	 *
	 *   - try to find the first unused crtc that can drive this connector,
	 *     and use that if we find one
	 */

	/* See if we already have a CRTC for this connector */
	if (connector->state->crtc) {
		crtc = connector->state->crtc;

		ret = drm_modeset_lock(&crtc->mutex, ctx);
		if (ret)
			goto fail;

		/* Make sure the crtc and connector are running */
		goto found;
	}

	/* Find an unused one (if possible) */
	for_each_crtc(dev, possible_crtc) {
		i++;
		if (!(encoder->possible_crtcs & (1 << i)))
			continue;

		ret = drm_modeset_lock(&possible_crtc->mutex, ctx);
		if (ret)
			goto fail;

		if (possible_crtc->state->enable) {
			drm_modeset_unlock(&possible_crtc->mutex);
			continue;
		}

		crtc = possible_crtc;
		break;
	}

	/*
	 * If we didn't find an unused CRTC, don't use any.
	 */
	if (!crtc) {
		drm_dbg_kms(&dev_priv->drm,
			    "no pipe available for load-detect\n");
		ret = -ENODEV;
		goto fail;
	}

found:
	intel_crtc = to_intel_crtc(crtc);

	state = drm_atomic_state_alloc(dev);
	restore_state = drm_atomic_state_alloc(dev);
	if (!state || !restore_state) {
		ret = -ENOMEM;
		goto fail;
	}

	state->acquire_ctx = ctx;
	restore_state->acquire_ctx = ctx;

	connector_state = drm_atomic_get_connector_state(state, connector);
	if (IS_ERR(connector_state)) {
		ret = PTR_ERR(connector_state);
		goto fail;
	}

	ret = drm_atomic_set_crtc_for_connector(connector_state, crtc);
	if (ret)
		goto fail;

	crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
	if (IS_ERR(crtc_state)) {
		ret = PTR_ERR(crtc_state);
		goto fail;
	}

	crtc_state->uapi.active = true;

	ret = drm_atomic_set_mode_for_crtc(&crtc_state->uapi,
					   &load_detect_mode);
	if (ret)
		goto fail;

	ret = intel_modeset_disable_planes(state, crtc);
	if (ret)
		goto fail;

	ret = PTR_ERR_OR_ZERO(drm_atomic_get_connector_state(restore_state, connector));
	if (!ret)
		ret = PTR_ERR_OR_ZERO(drm_atomic_get_crtc_state(restore_state, crtc));
	if (!ret)
		ret = drm_atomic_add_affected_planes(restore_state, crtc);
	if (ret) {
		drm_dbg_kms(&dev_priv->drm,
			    "Failed to create a copy of old state to restore: %i\n",
			    ret);
		goto fail;
	}

	ret = drm_atomic_commit(state);
	if (ret) {
		drm_dbg_kms(&dev_priv->drm,
			    "failed to set mode on load-detect pipe\n");
		goto fail;
	}

	old->restore_state = restore_state;
	drm_atomic_state_put(state);

	/* let the connector get through one full cycle before testing */
	intel_wait_for_vblank(dev_priv, intel_crtc->pipe);
	return true;

fail:
	if (state) {
		drm_atomic_state_put(state);
		state = NULL;
	}
	if (restore_state) {
		drm_atomic_state_put(restore_state);
		restore_state = NULL;
	}

	if (ret == -EDEADLK)
		return ret;

	return false;
}

void intel_release_load_detect_pipe(struct drm_connector *connector,
				    struct intel_load_detect_pipe *old,
				    struct drm_modeset_acquire_ctx *ctx)
{
	struct intel_encoder *intel_encoder =
		intel_attached_encoder(to_intel_connector(connector));
	struct drm_i915_private *i915 = to_i915(intel_encoder->base.dev);
	struct drm_encoder *encoder = &intel_encoder->base;
	struct drm_atomic_state *state = old->restore_state;
	int ret;

	drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
		    connector->base.id, connector->name,
		    encoder->base.id, encoder->name);

	if (!state)
		return;

	ret = drm_atomic_helper_commit_duplicated_state(state, ctx);
	if (ret)
		drm_dbg_kms(&i915->drm,
			    "Couldn't release load detect pipe: %i\n", ret);
	drm_atomic_state_put(state);
}

static int i9xx_pll_refclk(struct drm_device *dev,
			   const struct intel_crtc_state *pipe_config)
{
	struct drm_i915_private *dev_priv = to_i915(dev);
	u32 dpll = pipe_config->dpll_hw_state.dpll;

	if ((dpll & PLL_REF_INPUT_MASK) == PLLB_REF_INPUT_SPREADSPECTRUMIN)
		return dev_priv->vbt.lvds_ssc_freq;
	else if (HAS_PCH_SPLIT(dev_priv))
		return 120000;
	else if (!IS_GEN(dev_priv, 2))
		return 96000;
	else
		return 48000;
}

/* Returns the clock of the currently programmed mode of the given pipe. */
static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
				struct intel_crtc_state *pipe_config)
{
	struct drm_device *dev = crtc->base.dev;
	struct drm_i915_private *dev_priv = to_i915(dev);
	enum pipe pipe = crtc->pipe;
	u32 dpll = pipe_config->dpll_hw_state.dpll;
	u32 fp;
	struct dpll clock;
	int port_clock;
	int refclk = i9xx_pll_refclk(dev, pipe_config);

	if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
		fp = pipe_config->dpll_hw_state.fp0;
	else
		fp = pipe_config->dpll_hw_state.fp1;

	clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
	if (IS_PINEVIEW(dev_priv)) {
		clock.n = ffs((fp & FP_N_PINEVIEW_DIV_MASK) >> FP_N_DIV_SHIFT) - 1;
		clock.m2 = (fp & FP_M2_PINEVIEW_DIV_MASK) >> FP_M2_DIV_SHIFT;
	} else {
		clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
		clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
	}

	if (!IS_GEN(dev_priv, 2)) {
		if (IS_PINEVIEW(dev_priv))
			clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW) >>
				DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW);
		else
			clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >>
			       DPLL_FPA01_P1_POST_DIV_SHIFT);

		switch (dpll & DPLL_MODE_MASK) {
		case DPLLB_MODE_DAC_SERIAL:
			clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ?
				5 : 10;
			break;
		case DPLLB_MODE_LVDS:
			clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ?
				7 : 14;
			break;
		default:
			drm_dbg_kms(&dev_priv->drm,
				    "Unknown DPLL mode %08x in programmed "
				    "mode\n", (int)(dpll & DPLL_MODE_MASK));
			return;
		}

		if (IS_PINEVIEW(dev_priv))
			port_clock = pnv_calc_dpll_params(refclk, &clock);
		else
			port_clock = i9xx_calc_dpll_params(refclk, &clock);
	} else {
		u32 lvds = IS_I830(dev_priv) ? 0 : intel_de_read(dev_priv,
								 LVDS);
		bool is_lvds = (pipe == 1) && (lvds & LVDS_PORT_EN);

		if (is_lvds) {
			clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
				       DPLL_FPA01_P1_POST_DIV_SHIFT);

			if (lvds & LVDS_CLKB_POWER_UP)
				clock.p2 = 7;
			else
				clock.p2 = 14;
		} else {
			if (dpll & PLL_P1_DIVIDE_BY_TWO)
				clock.p1 = 2;
			else {
				clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
					    DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
			}
			if (dpll & PLL_P2_DIVIDE_BY_4)
				clock.p2 = 4;
			else
				clock.p2 = 2;
		}

		port_clock = i9xx_calc_dpll_params(refclk, &clock);
	}

	/*
	 * This value includes pixel_multiplier. We will use
	 * port_clock to compute adjusted_mode.crtc_clock in the
	 * encoder's get_config() function.
	 */
	pipe_config->port_clock = port_clock;
}

int intel_dotclock_calculate(int link_freq,
			     const struct intel_link_m_n *m_n)
{
	/*
	 * The calculation for the data clock is:
	 * pixel_clock = ((m/n)*(link_clock * nr_lanes))/bpp
	 * But we want to avoid losing precison if possible, so:
	 * pixel_clock = ((m * link_clock * nr_lanes)/(n*bpp))
	 *
	 * and the link clock is simpler:
	 * link_clock = (m * link_clock) / n
	 */

	if (!m_n->link_n)
		return 0;

	return div_u64(mul_u32_u32(m_n->link_m, link_freq), m_n->link_n);
}

static void ilk_pch_clock_get(struct intel_crtc *crtc,
			      struct intel_crtc_state *pipe_config)
{
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);

	/* read out port_clock from the DPLL */
	i9xx_crtc_clock_get(crtc, pipe_config);

	/*
	 * In case there is an active pipe without active ports,
	 * we may need some idea for the dotclock anyway.
	 * Calculate one based on the FDI configuration.
	 */
	pipe_config->hw.adjusted_mode.crtc_clock =
		intel_dotclock_calculate(intel_fdi_link_freq(dev_priv, pipe_config),
					 &pipe_config->fdi_m_n);
}

static void intel_crtc_state_reset(struct intel_crtc_state *crtc_state,
				   struct intel_crtc *crtc)
{
	memset(crtc_state, 0, sizeof(*crtc_state));

	__drm_atomic_helper_crtc_state_reset(&crtc_state->uapi, &crtc->base);

	crtc_state->cpu_transcoder = INVALID_TRANSCODER;
	crtc_state->master_transcoder = INVALID_TRANSCODER;
	crtc_state->hsw_workaround_pipe = INVALID_PIPE;
	crtc_state->output_format = INTEL_OUTPUT_FORMAT_INVALID;
	crtc_state->scaler_state.scaler_id = -1;
	crtc_state->mst_master_transcoder = INVALID_TRANSCODER;
}

static struct intel_crtc_state *intel_crtc_state_alloc(struct intel_crtc *crtc)
{
	struct intel_crtc_state *crtc_state;

	crtc_state = kmalloc(sizeof(*crtc_state), GFP_KERNEL);

	if (crtc_state)
		intel_crtc_state_reset(crtc_state, crtc);

	return crtc_state;
}

/* Returns the currently programmed mode of the given encoder. */
struct drm_display_mode *
intel_encoder_current_mode(struct intel_encoder *encoder)
{
	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
	struct intel_crtc_state *crtc_state;
	struct drm_display_mode *mode;
	struct intel_crtc *crtc;
	enum pipe pipe;

	if (!encoder->get_hw_state(encoder, &pipe))
		return NULL;

	crtc = intel_get_crtc_for_pipe(dev_priv, pipe);

	mode = kzalloc(sizeof(*mode), GFP_KERNEL);
	if (!mode)
		return NULL;

	crtc_state = intel_crtc_state_alloc(crtc);
	if (!crtc_state) {
		kfree(mode);
		return NULL;
	}

	if (!dev_priv->display.get_pipe_config(crtc, crtc_state)) {
		kfree(crtc_state);
		kfree(mode);
		return NULL;
	}

	encoder->get_config(encoder, crtc_state);

	intel_mode_from_pipe_config(mode, crtc_state);

	kfree(crtc_state);

	return mode;
}

static void intel_crtc_destroy(struct drm_crtc *crtc)
{
	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);

	drm_crtc_cleanup(crtc);
	kfree(intel_crtc);
}

/**
 * intel_wm_need_update - Check whether watermarks need updating
 * @cur: current plane state
 * @new: new plane state
 *
 * Check current plane state versus the new one to determine whether
 * watermarks need to be recalculated.
 *
 * Returns true or false.
 */
static bool intel_wm_need_update(const struct intel_plane_state *cur,
				 struct intel_plane_state *new)
{
	/* Update watermarks on tiling or size changes. */
	if (new->uapi.visible != cur->uapi.visible)
		return true;

	if (!cur->hw.fb || !new->hw.fb)
		return false;

	if (cur->hw.fb->modifier != new->hw.fb->modifier ||
	    cur->hw.rotation != new->hw.rotation ||
	    drm_rect_width(&new->uapi.src) != drm_rect_width(&cur->uapi.src) ||
	    drm_rect_height(&new->uapi.src) != drm_rect_height(&cur->uapi.src) ||
	    drm_rect_width(&new->uapi.dst) != drm_rect_width(&cur->uapi.dst) ||
	    drm_rect_height(&new->uapi.dst) != drm_rect_height(&cur->uapi.dst))
		return true;

	return false;
}

static bool needs_scaling(const struct intel_plane_state *state)
{
	int src_w = drm_rect_width(&state->uapi.src) >> 16;
	int src_h = drm_rect_height(&state->uapi.src) >> 16;
	int dst_w = drm_rect_width(&state->uapi.dst);
	int dst_h = drm_rect_height(&state->uapi.dst);

	return (src_w != dst_w || src_h != dst_h);
}

int intel_plane_atomic_calc_changes(const struct intel_crtc_state *old_crtc_state,
				    struct intel_crtc_state *crtc_state,
				    const struct intel_plane_state *old_plane_state,
				    struct intel_plane_state *plane_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	bool mode_changed = needs_modeset(crtc_state);
	bool was_crtc_enabled = old_crtc_state->hw.active;
	bool is_crtc_enabled = crtc_state->hw.active;
	bool turn_off, turn_on, visible, was_visible;
	int ret;

	if (INTEL_GEN(dev_priv) >= 9 && plane->id != PLANE_CURSOR) {
		ret = skl_update_scaler_plane(crtc_state, plane_state);
		if (ret)
			return ret;
	}

	was_visible = old_plane_state->uapi.visible;
	visible = plane_state->uapi.visible;

	if (!was_crtc_enabled && drm_WARN_ON(&dev_priv->drm, was_visible))
		was_visible = false;

	/*
	 * Visibility is calculated as if the crtc was on, but
	 * after scaler setup everything depends on it being off
	 * when the crtc isn't active.
	 *
	 * FIXME this is wrong for watermarks. Watermarks should also
	 * be computed as if the pipe would be active. Perhaps move
	 * per-plane wm computation to the .check_plane() hook, and
	 * only combine the results from all planes in the current place?
	 */
	if (!is_crtc_enabled) {
		intel_plane_set_invisible(crtc_state, plane_state);
		visible = false;
	}

	if (!was_visible && !visible)
		return 0;

	turn_off = was_visible && (!visible || mode_changed);
	turn_on = visible && (!was_visible || mode_changed);

	drm_dbg_atomic(&dev_priv->drm,
		       "[CRTC:%d:%s] with [PLANE:%d:%s] visible %i -> %i, off %i, on %i, ms %i\n",
		       crtc->base.base.id, crtc->base.name,
		       plane->base.base.id, plane->base.name,
		       was_visible, visible,
		       turn_off, turn_on, mode_changed);

	if (turn_on) {
		if (INTEL_GEN(dev_priv) < 5 && !IS_G4X(dev_priv))
			crtc_state->update_wm_pre = true;

		/* must disable cxsr around plane enable/disable */
		if (plane->id != PLANE_CURSOR)
			crtc_state->disable_cxsr = true;
	} else if (turn_off) {
		if (INTEL_GEN(dev_priv) < 5 && !IS_G4X(dev_priv))
			crtc_state->update_wm_post = true;

		/* must disable cxsr around plane enable/disable */
		if (plane->id != PLANE_CURSOR)
			crtc_state->disable_cxsr = true;
	} else if (intel_wm_need_update(old_plane_state, plane_state)) {
		if (INTEL_GEN(dev_priv) < 5 && !IS_G4X(dev_priv)) {
			/* FIXME bollocks */
			crtc_state->update_wm_pre = true;
			crtc_state->update_wm_post = true;
		}
	}

	if (visible || was_visible)
		crtc_state->fb_bits |= plane->frontbuffer_bit;

	/*
	 * ILK/SNB DVSACNTR/Sprite Enable
	 * IVB SPR_CTL/Sprite Enable
	 * "When in Self Refresh Big FIFO mode, a write to enable the
	 *  plane will be internally buffered and delayed while Big FIFO
	 *  mode is exiting."
	 *
	 * Which means that enabling the sprite can take an extra frame
	 * when we start in big FIFO mode (LP1+). Thus we need to drop
	 * down to LP0 and wait for vblank in order to make sure the
	 * sprite gets enabled on the next vblank after the register write.
	 * Doing otherwise would risk enabling the sprite one frame after
	 * we've already signalled flip completion. We can resume LP1+
	 * once the sprite has been enabled.
	 *
	 *
	 * WaCxSRDisabledForSpriteScaling:ivb
	 * IVB SPR_SCALE/Scaling Enable
	 * "Low Power watermarks must be disabled for at least one
	 *  frame before enabling sprite scaling, and kept disabled
	 *  until sprite scaling is disabled."
	 *
	 * ILK/SNB DVSASCALE/Scaling Enable
	 * "When in Self Refresh Big FIFO mode, scaling enable will be
	 *  masked off while Big FIFO mode is exiting."
	 *
	 * Despite the w/a only being listed for IVB we assume that
	 * the ILK/SNB note has similar ramifications, hence we apply
	 * the w/a on all three platforms.
	 *
	 * With experimental results seems this is needed also for primary
	 * plane, not only sprite plane.
	 */
	if (plane->id != PLANE_CURSOR &&
	    (IS_GEN_RANGE(dev_priv, 5, 6) ||
	     IS_IVYBRIDGE(dev_priv)) &&
	    (turn_on || (!needs_scaling(old_plane_state) &&
			 needs_scaling(plane_state))))
		crtc_state->disable_lp_wm = true;

	return 0;
}

static bool encoders_cloneable(const struct intel_encoder *a,
			       const struct intel_encoder *b)
{
	/* masks could be asymmetric, so check both ways */
	return a == b || (a->cloneable & (1 << b->type) &&
			  b->cloneable & (1 << a->type));
}

static bool check_single_encoder_cloning(struct drm_atomic_state *state,
					 struct intel_crtc *crtc,
					 struct intel_encoder *encoder)
{
	struct intel_encoder *source_encoder;
	struct drm_connector *connector;
	struct drm_connector_state *connector_state;
	int i;

	for_each_new_connector_in_state(state, connector, connector_state, i) {
		if (connector_state->crtc != &crtc->base)
			continue;

		source_encoder =
			to_intel_encoder(connector_state->best_encoder);
		if (!encoders_cloneable(encoder, source_encoder))
			return false;
	}

	return true;
}

static int icl_add_linked_planes(struct intel_atomic_state *state)
{
	struct intel_plane *plane, *linked;
	struct intel_plane_state *plane_state, *linked_plane_state;
	int i;

	for_each_new_intel_plane_in_state(state, plane, plane_state, i) {
		linked = plane_state->planar_linked_plane;

		if (!linked)
			continue;

		linked_plane_state = intel_atomic_get_plane_state(state, linked);
		if (IS_ERR(linked_plane_state))
			return PTR_ERR(linked_plane_state);

		drm_WARN_ON(state->base.dev,
			    linked_plane_state->planar_linked_plane != plane);
		drm_WARN_ON(state->base.dev,
			    linked_plane_state->planar_slave == plane_state->planar_slave);
	}

	return 0;
}

static int icl_check_nv12_planes(struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	struct intel_atomic_state *state = to_intel_atomic_state(crtc_state->uapi.state);
	struct intel_plane *plane, *linked;
	struct intel_plane_state *plane_state;
	int i;

	if (INTEL_GEN(dev_priv) < 11)
		return 0;

	/*
	 * Destroy all old plane links and make the slave plane invisible
	 * in the crtc_state->active_planes mask.
	 */
	for_each_new_intel_plane_in_state(state, plane, plane_state, i) {
		if (plane->pipe != crtc->pipe || !plane_state->planar_linked_plane)
			continue;

		plane_state->planar_linked_plane = NULL;
		if (plane_state->planar_slave && !plane_state->uapi.visible) {
			crtc_state->active_planes &= ~BIT(plane->id);
			crtc_state->update_planes |= BIT(plane->id);
		}

		plane_state->planar_slave = false;
	}

	if (!crtc_state->nv12_planes)
		return 0;

	for_each_new_intel_plane_in_state(state, plane, plane_state, i) {
		struct intel_plane_state *linked_state = NULL;

		if (plane->pipe != crtc->pipe ||
		    !(crtc_state->nv12_planes & BIT(plane->id)))
			continue;

		for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, linked) {
			if (!icl_is_nv12_y_plane(dev_priv, linked->id))
				continue;

			if (crtc_state->active_planes & BIT(linked->id))
				continue;

			linked_state = intel_atomic_get_plane_state(state, linked);
			if (IS_ERR(linked_state))
				return PTR_ERR(linked_state);

			break;
		}

		if (!linked_state) {
			drm_dbg_kms(&dev_priv->drm,
				    "Need %d free Y planes for planar YUV\n",
				    hweight8(crtc_state->nv12_planes));

			return -EINVAL;
		}

		plane_state->planar_linked_plane = linked;

		linked_state->planar_slave = true;
		linked_state->planar_linked_plane = plane;
		crtc_state->active_planes |= BIT(linked->id);
		crtc_state->update_planes |= BIT(linked->id);
		drm_dbg_kms(&dev_priv->drm, "Using %s as Y plane for %s\n",
			    linked->base.name, plane->base.name);

		/* Copy parameters to slave plane */
		linked_state->ctl = plane_state->ctl | PLANE_CTL_YUV420_Y_PLANE;
		linked_state->color_ctl = plane_state->color_ctl;
		linked_state->view = plane_state->view;
		memcpy(linked_state->color_plane, plane_state->color_plane,
		       sizeof(linked_state->color_plane));

		intel_plane_copy_uapi_to_hw_state(linked_state, plane_state);
		linked_state->uapi.src = plane_state->uapi.src;
		linked_state->uapi.dst = plane_state->uapi.dst;

		if (icl_is_hdr_plane(dev_priv, plane->id)) {
			if (linked->id == PLANE_SPRITE5)
				plane_state->cus_ctl |= PLANE_CUS_PLANE_7;
			else if (linked->id == PLANE_SPRITE4)
				plane_state->cus_ctl |= PLANE_CUS_PLANE_6;
			else if (linked->id == PLANE_SPRITE3)
				plane_state->cus_ctl |= PLANE_CUS_PLANE_5_RKL;
			else if (linked->id == PLANE_SPRITE2)
				plane_state->cus_ctl |= PLANE_CUS_PLANE_4_RKL;
			else
				MISSING_CASE(linked->id);
		}
	}

	return 0;
}

static bool c8_planes_changed(const struct intel_crtc_state *new_crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc);
	struct intel_atomic_state *state =
		to_intel_atomic_state(new_crtc_state->uapi.state);
	const struct intel_crtc_state *old_crtc_state =
		intel_atomic_get_old_crtc_state(state, crtc);

	return !old_crtc_state->c8_planes != !new_crtc_state->c8_planes;
}

static u16 hsw_linetime_wm(const struct intel_crtc_state *crtc_state)
{
	const struct drm_display_mode *adjusted_mode =
		&crtc_state->hw.adjusted_mode;
	int linetime_wm;

	if (!crtc_state->hw.enable)
		return 0;

	linetime_wm = DIV_ROUND_CLOSEST(adjusted_mode->crtc_htotal * 1000 * 8,
					adjusted_mode->crtc_clock);

	return min(linetime_wm, 0x1ff);
}

static u16 hsw_ips_linetime_wm(const struct intel_crtc_state *crtc_state,
			       const struct intel_cdclk_state *cdclk_state)
{
	const struct drm_display_mode *adjusted_mode =
		&crtc_state->hw.adjusted_mode;
	int linetime_wm;

	if (!crtc_state->hw.enable)
		return 0;

	linetime_wm = DIV_ROUND_CLOSEST(adjusted_mode->crtc_htotal * 1000 * 8,
					cdclk_state->logical.cdclk);

	return min(linetime_wm, 0x1ff);
}

static u16 skl_linetime_wm(const struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	const struct drm_display_mode *adjusted_mode =
		&crtc_state->hw.adjusted_mode;
	int linetime_wm;

	if (!crtc_state->hw.enable)
		return 0;

	linetime_wm = DIV_ROUND_UP(adjusted_mode->crtc_htotal * 1000 * 8,
				   crtc_state->pixel_rate);

	/* Display WA #1135: BXT:ALL GLK:ALL */
	if (IS_GEN9_LP(dev_priv) && dev_priv->ipc_enabled)
		linetime_wm /= 2;

	return min(linetime_wm, 0x1ff);
}

static int hsw_compute_linetime_wm(struct intel_atomic_state *state,
				   struct intel_crtc *crtc)
{
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	struct intel_crtc_state *crtc_state =
		intel_atomic_get_new_crtc_state(state, crtc);
	const struct intel_cdclk_state *cdclk_state;

	if (INTEL_GEN(dev_priv) >= 9)
		crtc_state->linetime = skl_linetime_wm(crtc_state);
	else
		crtc_state->linetime = hsw_linetime_wm(crtc_state);

	if (!hsw_crtc_supports_ips(crtc))
		return 0;

	cdclk_state = intel_atomic_get_cdclk_state(state);
	if (IS_ERR(cdclk_state))
		return PTR_ERR(cdclk_state);

	crtc_state->ips_linetime = hsw_ips_linetime_wm(crtc_state,
						       cdclk_state);

	return 0;
}

static int intel_crtc_atomic_check(struct intel_atomic_state *state,
				   struct intel_crtc *crtc)
{
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	struct intel_crtc_state *crtc_state =
		intel_atomic_get_new_crtc_state(state, crtc);
	bool mode_changed = needs_modeset(crtc_state);
	int ret;

	if (INTEL_GEN(dev_priv) < 5 && !IS_G4X(dev_priv) &&
	    mode_changed && !crtc_state->hw.active)
		crtc_state->update_wm_post = true;

	if (mode_changed && crtc_state->hw.enable &&
	    dev_priv->display.crtc_compute_clock &&
	    !drm_WARN_ON(&dev_priv->drm, crtc_state->shared_dpll)) {
		ret = dev_priv->display.crtc_compute_clock(crtc, crtc_state);
		if (ret)
			return ret;
	}

	/*
	 * May need to update pipe gamma enable bits
	 * when C8 planes are getting enabled/disabled.
	 */
	if (c8_planes_changed(crtc_state))
		crtc_state->uapi.color_mgmt_changed = true;

	if (mode_changed || crtc_state->update_pipe ||
	    crtc_state->uapi.color_mgmt_changed) {
		ret = intel_color_check(crtc_state);
		if (ret)
			return ret;
	}

	if (dev_priv->display.compute_pipe_wm) {
		ret = dev_priv->display.compute_pipe_wm(crtc_state);
		if (ret) {
			drm_dbg_kms(&dev_priv->drm,
				    "Target pipe watermarks are invalid\n");
			return ret;
		}
	}

	if (dev_priv->display.compute_intermediate_wm) {
		if (drm_WARN_ON(&dev_priv->drm,
				!dev_priv->display.compute_pipe_wm))
			return 0;

		/*
		 * Calculate 'intermediate' watermarks that satisfy both the
		 * old state and the new state.  We can program these
		 * immediately.
		 */
		ret = dev_priv->display.compute_intermediate_wm(crtc_state);
		if (ret) {
			drm_dbg_kms(&dev_priv->drm,
				    "No valid intermediate pipe watermarks are possible\n");
			return ret;
		}
	}

	if (INTEL_GEN(dev_priv) >= 9) {
		if (mode_changed || crtc_state->update_pipe) {
			ret = skl_update_scaler_crtc(crtc_state);
			if (ret)
				return ret;
		}

		ret = intel_atomic_setup_scalers(dev_priv, crtc, crtc_state);
		if (ret)
			return ret;
	}

	if (HAS_IPS(dev_priv)) {
		ret = hsw_compute_ips_config(crtc_state);
		if (ret)
			return ret;
	}

	if (INTEL_GEN(dev_priv) >= 9 ||
	    IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) {
		ret = hsw_compute_linetime_wm(state, crtc);
		if (ret)
			return ret;

	}

	if (!mode_changed)
		intel_psr2_sel_fetch_update(state, crtc);

	return 0;
}

static void intel_modeset_update_connector_atomic_state(struct drm_device *dev)
{
	struct intel_connector *connector;
	struct drm_connector_list_iter conn_iter;

	drm_connector_list_iter_begin(dev, &conn_iter);
	for_each_intel_connector_iter(connector, &conn_iter) {
		if (connector->base.state->crtc)
			drm_connector_put(&connector->base);

		if (connector->base.encoder) {
			connector->base.state->best_encoder =
				connector->base.encoder;
			connector->base.state->crtc =
				connector->base.encoder->crtc;

			drm_connector_get(&connector->base);
		} else {
			connector->base.state->best_encoder = NULL;
			connector->base.state->crtc = NULL;
		}
	}
	drm_connector_list_iter_end(&conn_iter);
}

static int
compute_sink_pipe_bpp(const struct drm_connector_state *conn_state,
		      struct intel_crtc_state *pipe_config)
{
	struct drm_connector *connector = conn_state->connector;
	struct drm_i915_private *i915 = to_i915(pipe_config->uapi.crtc->dev);
	const struct drm_display_info *info = &connector->display_info;
	int bpp;

	switch (conn_state->max_bpc) {
	case 6 ... 7:
		bpp = 6 * 3;
		break;
	case 8 ... 9:
		bpp = 8 * 3;
		break;
	case 10 ... 11:
		bpp = 10 * 3;
		break;
	case 12 ... 16:
		bpp = 12 * 3;
		break;
	default:
		MISSING_CASE(conn_state->max_bpc);
		return -EINVAL;
	}

	if (bpp < pipe_config->pipe_bpp) {
		drm_dbg_kms(&i915->drm,
			    "[CONNECTOR:%d:%s] Limiting display bpp to %d instead of "
			    "EDID bpp %d, requested bpp %d, max platform bpp %d\n",
			    connector->base.id, connector->name,
			    bpp, 3 * info->bpc,
			    3 * conn_state->max_requested_bpc,
			    pipe_config->pipe_bpp);

		pipe_config->pipe_bpp = bpp;
	}

	return 0;
}

static int
compute_baseline_pipe_bpp(struct intel_crtc *crtc,
			  struct intel_crtc_state *pipe_config)
{
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	struct drm_atomic_state *state = pipe_config->uapi.state;
	struct drm_connector *connector;
	struct drm_connector_state *connector_state;
	int bpp, i;

	if ((IS_G4X(dev_priv) || IS_VALLEYVIEW(dev_priv) ||
	    IS_CHERRYVIEW(dev_priv)))
		bpp = 10*3;
	else if (INTEL_GEN(dev_priv) >= 5)
		bpp = 12*3;
	else
		bpp = 8*3;

	pipe_config->pipe_bpp = bpp;

	/* Clamp display bpp to connector max bpp */
	for_each_new_connector_in_state(state, connector, connector_state, i) {
		int ret;

		if (connector_state->crtc != &crtc->base)
			continue;

		ret = compute_sink_pipe_bpp(connector_state, pipe_config);
		if (ret)
			return ret;
	}

	return 0;
}

static void intel_dump_crtc_timings(struct drm_i915_private *i915,
				    const struct drm_display_mode *mode)
{
	drm_dbg_kms(&i915->drm, "crtc timings: %d %d %d %d %d %d %d %d %d, "
		    "type: 0x%x flags: 0x%x\n",
		    mode->crtc_clock,
		    mode->crtc_hdisplay, mode->crtc_hsync_start,
		    mode->crtc_hsync_end, mode->crtc_htotal,
		    mode->crtc_vdisplay, mode->crtc_vsync_start,
		    mode->crtc_vsync_end, mode->crtc_vtotal,
		    mode->type, mode->flags);
}

static void
intel_dump_m_n_config(const struct intel_crtc_state *pipe_config,
		      const char *id, unsigned int lane_count,
		      const struct intel_link_m_n *m_n)
{
	struct drm_i915_private *i915 = to_i915(pipe_config->uapi.crtc->dev);

	drm_dbg_kms(&i915->drm,
		    "%s: lanes: %i; gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n",
		    id, lane_count,
		    m_n->gmch_m, m_n->gmch_n,
		    m_n->link_m, m_n->link_n, m_n->tu);
}

static void
intel_dump_infoframe(struct drm_i915_private *dev_priv,
		     const union hdmi_infoframe *frame)
{
	if (!drm_debug_enabled(DRM_UT_KMS))
		return;

	hdmi_infoframe_log(KERN_DEBUG, dev_priv->drm.dev, frame);
}

static void
intel_dump_dp_vsc_sdp(struct drm_i915_private *dev_priv,
		      const struct drm_dp_vsc_sdp *vsc)
{
	if (!drm_debug_enabled(DRM_UT_KMS))
		return;

	drm_dp_vsc_sdp_log(KERN_DEBUG, dev_priv->drm.dev, vsc);
}

#define OUTPUT_TYPE(x) [INTEL_OUTPUT_ ## x] = #x

static const char * const output_type_str[] = {
	OUTPUT_TYPE(UNUSED),
	OUTPUT_TYPE(ANALOG),
	OUTPUT_TYPE(DVO),
	OUTPUT_TYPE(SDVO),
	OUTPUT_TYPE(LVDS),
	OUTPUT_TYPE(TVOUT),
	OUTPUT_TYPE(HDMI),
	OUTPUT_TYPE(DP),
	OUTPUT_TYPE(EDP),
	OUTPUT_TYPE(DSI),
	OUTPUT_TYPE(DDI),
	OUTPUT_TYPE(DP_MST),
};

#undef OUTPUT_TYPE

static void snprintf_output_types(char *buf, size_t len,
				  unsigned int output_types)
{
	char *str = buf;
	int i;

	str[0] = '\0';

	for (i = 0; i < ARRAY_SIZE(output_type_str); i++) {
		int r;

		if ((output_types & BIT(i)) == 0)
			continue;

		r = snprintf(str, len, "%s%s",
			     str != buf ? "," : "", output_type_str[i]);
		if (r >= len)
			break;
		str += r;
		len -= r;

		output_types &= ~BIT(i);
	}

	WARN_ON_ONCE(output_types != 0);
}

static const char * const output_format_str[] = {
	[INTEL_OUTPUT_FORMAT_INVALID] = "Invalid",
	[INTEL_OUTPUT_FORMAT_RGB] = "RGB",
	[INTEL_OUTPUT_FORMAT_YCBCR420] = "YCBCR4:2:0",
	[INTEL_OUTPUT_FORMAT_YCBCR444] = "YCBCR4:4:4",
};

static const char *output_formats(enum intel_output_format format)
{
	if (format >= ARRAY_SIZE(output_format_str))
		format = INTEL_OUTPUT_FORMAT_INVALID;
	return output_format_str[format];
}

static void intel_dump_plane_state(const struct intel_plane_state *plane_state)
{
	struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane);
	struct drm_i915_private *i915 = to_i915(plane->base.dev);
	const struct drm_framebuffer *fb = plane_state->hw.fb;
	struct drm_format_name_buf format_name;

	if (!fb) {
		drm_dbg_kms(&i915->drm,
			    "[PLANE:%d:%s] fb: [NOFB], visible: %s\n",
			    plane->base.base.id, plane->base.name,
			    yesno(plane_state->uapi.visible));
		return;
	}

	drm_dbg_kms(&i915->drm,
		    "[PLANE:%d:%s] fb: [FB:%d] %ux%u format = %s, visible: %s\n",
		    plane->base.base.id, plane->base.name,
		    fb->base.id, fb->width, fb->height,
		    drm_get_format_name(fb->format->format, &format_name),
		    yesno(plane_state->uapi.visible));
	drm_dbg_kms(&i915->drm, "\trotation: 0x%x, scaler: %d\n",
		    plane_state->hw.rotation, plane_state->scaler_id);
	if (plane_state->uapi.visible)
		drm_dbg_kms(&i915->drm,
			    "\tsrc: " DRM_RECT_FP_FMT " dst: " DRM_RECT_FMT "\n",
			    DRM_RECT_FP_ARG(&plane_state->uapi.src),
			    DRM_RECT_ARG(&plane_state->uapi.dst));
}

static void intel_dump_pipe_config(const struct intel_crtc_state *pipe_config,
				   struct intel_atomic_state *state,
				   const char *context)
{
	struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	const struct intel_plane_state *plane_state;
	struct intel_plane *plane;
	char buf[64];
	int i;

	drm_dbg_kms(&dev_priv->drm, "[CRTC:%d:%s] enable: %s %s\n",
		    crtc->base.base.id, crtc->base.name,
		    yesno(pipe_config->hw.enable), context);

	if (!pipe_config->hw.enable)
		goto dump_planes;

	snprintf_output_types(buf, sizeof(buf), pipe_config->output_types);
	drm_dbg_kms(&dev_priv->drm,
		    "active: %s, output_types: %s (0x%x), output format: %s\n",
		    yesno(pipe_config->hw.active),
		    buf, pipe_config->output_types,
		    output_formats(pipe_config->output_format));

	drm_dbg_kms(&dev_priv->drm,
		    "cpu_transcoder: %s, pipe bpp: %i, dithering: %i\n",
		    transcoder_name(pipe_config->cpu_transcoder),
		    pipe_config->pipe_bpp, pipe_config->dither);

	drm_dbg_kms(&dev_priv->drm,
		    "port sync: master transcoder: %s, slave transcoder bitmask = 0x%x\n",
		    transcoder_name(pipe_config->master_transcoder),
		    pipe_config->sync_mode_slaves_mask);

	if (pipe_config->has_pch_encoder)
		intel_dump_m_n_config(pipe_config, "fdi",
				      pipe_config->fdi_lanes,
				      &pipe_config->fdi_m_n);

	if (intel_crtc_has_dp_encoder(pipe_config)) {
		intel_dump_m_n_config(pipe_config, "dp m_n",
				pipe_config->lane_count, &pipe_config->dp_m_n);
		if (pipe_config->has_drrs)
			intel_dump_m_n_config(pipe_config, "dp m2_n2",
					      pipe_config->lane_count,
					      &pipe_config->dp_m2_n2);
	}

	drm_dbg_kms(&dev_priv->drm,
		    "audio: %i, infoframes: %i, infoframes enabled: 0x%x\n",
		    pipe_config->has_audio, pipe_config->has_infoframe,
		    pipe_config->infoframes.enable);

	if (pipe_config->infoframes.enable &
	    intel_hdmi_infoframe_enable(HDMI_PACKET_TYPE_GENERAL_CONTROL))
		drm_dbg_kms(&dev_priv->drm, "GCP: 0x%x\n",
			    pipe_config->infoframes.gcp);
	if (pipe_config->infoframes.enable &
	    intel_hdmi_infoframe_enable(HDMI_INFOFRAME_TYPE_AVI))
		intel_dump_infoframe(dev_priv, &pipe_config->infoframes.avi);
	if (pipe_config->infoframes.enable &
	    intel_hdmi_infoframe_enable(HDMI_INFOFRAME_TYPE_SPD))
		intel_dump_infoframe(dev_priv, &pipe_config->infoframes.spd);
	if (pipe_config->infoframes.enable &
	    intel_hdmi_infoframe_enable(HDMI_INFOFRAME_TYPE_VENDOR))
		intel_dump_infoframe(dev_priv, &pipe_config->infoframes.hdmi);
	if (pipe_config->infoframes.enable &
	    intel_hdmi_infoframe_enable(HDMI_INFOFRAME_TYPE_DRM))
		intel_dump_infoframe(dev_priv, &pipe_config->infoframes.drm);
	if (pipe_config->infoframes.enable &
	    intel_hdmi_infoframe_enable(HDMI_PACKET_TYPE_GAMUT_METADATA))
		intel_dump_infoframe(dev_priv, &pipe_config->infoframes.drm);
	if (pipe_config->infoframes.enable &
	    intel_hdmi_infoframe_enable(DP_SDP_VSC))
		intel_dump_dp_vsc_sdp(dev_priv, &pipe_config->infoframes.vsc);

	drm_dbg_kms(&dev_priv->drm, "requested mode:\n");
	drm_mode_debug_printmodeline(&pipe_config->hw.mode);
	drm_dbg_kms(&dev_priv->drm, "adjusted mode:\n");
	drm_mode_debug_printmodeline(&pipe_config->hw.adjusted_mode);
	intel_dump_crtc_timings(dev_priv, &pipe_config->hw.adjusted_mode);
	drm_dbg_kms(&dev_priv->drm,
		    "port clock: %d, pipe src size: %dx%d, pixel rate %d\n",
		    pipe_config->port_clock,
		    pipe_config->pipe_src_w, pipe_config->pipe_src_h,
		    pipe_config->pixel_rate);

	drm_dbg_kms(&dev_priv->drm, "linetime: %d, ips linetime: %d\n",
		    pipe_config->linetime, pipe_config->ips_linetime);

	if (INTEL_GEN(dev_priv) >= 9)
		drm_dbg_kms(&dev_priv->drm,
			    "num_scalers: %d, scaler_users: 0x%x, scaler_id: %d\n",
			    crtc->num_scalers,
			    pipe_config->scaler_state.scaler_users,
			    pipe_config->scaler_state.scaler_id);

	if (HAS_GMCH(dev_priv))
		drm_dbg_kms(&dev_priv->drm,
			    "gmch pfit: control: 0x%08x, ratios: 0x%08x, lvds border: 0x%08x\n",
			    pipe_config->gmch_pfit.control,
			    pipe_config->gmch_pfit.pgm_ratios,
			    pipe_config->gmch_pfit.lvds_border_bits);
	else
		drm_dbg_kms(&dev_priv->drm,
			    "pch pfit: " DRM_RECT_FMT ", %s, force thru: %s\n",
			    DRM_RECT_ARG(&pipe_config->pch_pfit.dst),
			    enableddisabled(pipe_config->pch_pfit.enabled),
			    yesno(pipe_config->pch_pfit.force_thru));

	drm_dbg_kms(&dev_priv->drm, "ips: %i, double wide: %i\n",
		    pipe_config->ips_enabled, pipe_config->double_wide);

	intel_dpll_dump_hw_state(dev_priv, &pipe_config->dpll_hw_state);

	if (IS_CHERRYVIEW(dev_priv))
		drm_dbg_kms(&dev_priv->drm,
			    "cgm_mode: 0x%x gamma_mode: 0x%x gamma_enable: %d csc_enable: %d\n",
			    pipe_config->cgm_mode, pipe_config->gamma_mode,
			    pipe_config->gamma_enable, pipe_config->csc_enable);
	else
		drm_dbg_kms(&dev_priv->drm,
			    "csc_mode: 0x%x gamma_mode: 0x%x gamma_enable: %d csc_enable: %d\n",
			    pipe_config->csc_mode, pipe_config->gamma_mode,
			    pipe_config->gamma_enable, pipe_config->csc_enable);

	drm_dbg_kms(&dev_priv->drm, "MST master transcoder: %s\n",
		    transcoder_name(pipe_config->mst_master_transcoder));

dump_planes:
	if (!state)
		return;

	for_each_new_intel_plane_in_state(state, plane, plane_state, i) {
		if (plane->pipe == crtc->pipe)
			intel_dump_plane_state(plane_state);
	}
}

static bool check_digital_port_conflicts(struct intel_atomic_state *state)
{
	struct drm_device *dev = state->base.dev;
	struct drm_connector *connector;
	struct drm_connector_list_iter conn_iter;
	unsigned int used_ports = 0;
	unsigned int used_mst_ports = 0;
	bool ret = true;

	/*
	 * We're going to peek into connector->state,
	 * hence connection_mutex must be held.
	 */
	drm_modeset_lock_assert_held(&dev->mode_config.connection_mutex);

	/*
	 * Walk the connector list instead of the encoder
	 * list to detect the problem on ddi platforms
	 * where there's just one encoder per digital port.
	 */
	drm_connector_list_iter_begin(dev, &conn_iter);
	drm_for_each_connector_iter(connector, &conn_iter) {
		struct drm_connector_state *connector_state;
		struct intel_encoder *encoder;

		connector_state =
			drm_atomic_get_new_connector_state(&state->base,
							   connector);
		if (!connector_state)
			connector_state = connector->state;

		if (!connector_state->best_encoder)
			continue;

		encoder = to_intel_encoder(connector_state->best_encoder);

		drm_WARN_ON(dev, !connector_state->crtc);

		switch (encoder->type) {
		case INTEL_OUTPUT_DDI:
			if (drm_WARN_ON(dev, !HAS_DDI(to_i915(dev))))
				break;
			fallthrough;
		case INTEL_OUTPUT_DP:
		case INTEL_OUTPUT_HDMI:
		case INTEL_OUTPUT_EDP:
			/* the same port mustn't appear more than once */
			if (used_ports & BIT(encoder->port))
				ret = false;

			used_ports |= BIT(encoder->port);
			break;
		case INTEL_OUTPUT_DP_MST:
			used_mst_ports |=
				1 << encoder->port;
			break;
		default:
			break;
		}
	}
	drm_connector_list_iter_end(&conn_iter);

	/* can't mix MST and SST/HDMI on the same port */
	if (used_ports & used_mst_ports)
		return false;

	return ret;
}

static void
intel_crtc_copy_uapi_to_hw_state_nomodeset(struct intel_crtc_state *crtc_state)
{
	intel_crtc_copy_color_blobs(crtc_state);
}

static void
intel_crtc_copy_uapi_to_hw_state(struct intel_crtc_state *crtc_state)
{
	crtc_state->hw.enable = crtc_state->uapi.enable;
	crtc_state->hw.active = crtc_state->uapi.active;
	crtc_state->hw.mode = crtc_state->uapi.mode;
	crtc_state->hw.adjusted_mode = crtc_state->uapi.adjusted_mode;
	intel_crtc_copy_uapi_to_hw_state_nomodeset(crtc_state);
}

static void intel_crtc_copy_hw_to_uapi_state(struct intel_crtc_state *crtc_state)
{
	crtc_state->uapi.enable = crtc_state->hw.enable;
	crtc_state->uapi.active = crtc_state->hw.active;
	drm_WARN_ON(crtc_state->uapi.crtc->dev,
		    drm_atomic_set_mode_for_crtc(&crtc_state->uapi, &crtc_state->hw.mode) < 0);

	crtc_state->uapi.adjusted_mode = crtc_state->hw.adjusted_mode;

	/* copy color blobs to uapi */
	drm_property_replace_blob(&crtc_state->uapi.degamma_lut,
				  crtc_state->hw.degamma_lut);
	drm_property_replace_blob(&crtc_state->uapi.gamma_lut,
				  crtc_state->hw.gamma_lut);
	drm_property_replace_blob(&crtc_state->uapi.ctm,
				  crtc_state->hw.ctm);
}

static int
intel_crtc_prepare_cleared_state(struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	struct intel_crtc_state *saved_state;

	saved_state = intel_crtc_state_alloc(crtc);
	if (!saved_state)
		return -ENOMEM;

	/* free the old crtc_state->hw members */
	intel_crtc_free_hw_state(crtc_state);

	/* FIXME: before the switch to atomic started, a new pipe_config was
	 * kzalloc'd. Code that depends on any field being zero should be
	 * fixed, so that the crtc_state can be safely duplicated. For now,
	 * only fields that are know to not cause problems are preserved. */

	saved_state->uapi = crtc_state->uapi;
	saved_state->scaler_state = crtc_state->scaler_state;
	saved_state->shared_dpll = crtc_state->shared_dpll;
	saved_state->dpll_hw_state = crtc_state->dpll_hw_state;
	memcpy(saved_state->icl_port_dplls, crtc_state->icl_port_dplls,
	       sizeof(saved_state->icl_port_dplls));
	saved_state->crc_enabled = crtc_state->crc_enabled;
	if (IS_G4X(dev_priv) ||
	    IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
		saved_state->wm = crtc_state->wm;

	memcpy(crtc_state, saved_state, sizeof(*crtc_state));
	kfree(saved_state);

	intel_crtc_copy_uapi_to_hw_state(crtc_state);

	return 0;
}

static int
intel_modeset_pipe_config(struct intel_crtc_state *pipe_config)
{
	struct drm_crtc *crtc = pipe_config->uapi.crtc;
	struct drm_atomic_state *state = pipe_config->uapi.state;
	struct drm_i915_private *i915 = to_i915(pipe_config->uapi.crtc->dev);
	struct drm_connector *connector;
	struct drm_connector_state *connector_state;
	int base_bpp, ret, i;
	bool retry = true;

	pipe_config->cpu_transcoder =
		(enum transcoder) to_intel_crtc(crtc)->pipe;

	/*
	 * Sanitize sync polarity flags based on requested ones. If neither
	 * positive or negative polarity is requested, treat this as meaning
	 * negative polarity.
	 */
	if (!(pipe_config->hw.adjusted_mode.flags &
	      (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NHSYNC)))
		pipe_config->hw.adjusted_mode.flags |= DRM_MODE_FLAG_NHSYNC;

	if (!(pipe_config->hw.adjusted_mode.flags &
	      (DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_NVSYNC)))
		pipe_config->hw.adjusted_mode.flags |= DRM_MODE_FLAG_NVSYNC;

	ret = compute_baseline_pipe_bpp(to_intel_crtc(crtc),
					pipe_config);
	if (ret)
		return ret;

	base_bpp = pipe_config->pipe_bpp;

	/*
	 * Determine the real pipe dimensions. Note that stereo modes can
	 * increase the actual pipe size due to the frame doubling and
	 * insertion of additional space for blanks between the frame. This
	 * is stored in the crtc timings. We use the requested mode to do this
	 * computation to clearly distinguish it from the adjusted mode, which
	 * can be changed by the connectors in the below retry loop.
	 */
	drm_mode_get_hv_timing(&pipe_config->hw.mode,
			       &pipe_config->pipe_src_w,
			       &pipe_config->pipe_src_h);

	for_each_new_connector_in_state(state, connector, connector_state, i) {
		struct intel_encoder *encoder =
			to_intel_encoder(connector_state->best_encoder);

		if (connector_state->crtc != crtc)
			continue;

		if (!check_single_encoder_cloning(state, to_intel_crtc(crtc), encoder)) {
			drm_dbg_kms(&i915->drm,
				    "rejecting invalid cloning configuration\n");
			return -EINVAL;
		}

		/*
		 * Determine output_types before calling the .compute_config()
		 * hooks so that the hooks can use this information safely.
		 */
		if (encoder->compute_output_type)
			pipe_config->output_types |=
				BIT(encoder->compute_output_type(encoder, pipe_config,
								 connector_state));
		else
			pipe_config->output_types |= BIT(encoder->type);
	}

encoder_retry:
	/* Ensure the port clock defaults are reset when retrying. */
	pipe_config->port_clock = 0;
	pipe_config->pixel_multiplier = 1;

	/* Fill in default crtc timings, allow encoders to overwrite them. */
	drm_mode_set_crtcinfo(&pipe_config->hw.adjusted_mode,
			      CRTC_STEREO_DOUBLE);

	/* Pass our mode to the connectors and the CRTC to give them a chance to
	 * adjust it according to limitations or connector properties, and also
	 * a chance to reject the mode entirely.
	 */
	for_each_new_connector_in_state(state, connector, connector_state, i) {
		struct intel_encoder *encoder =
			to_intel_encoder(connector_state->best_encoder);

		if (connector_state->crtc != crtc)
			continue;

		ret = encoder->compute_config(encoder, pipe_config,
					      connector_state);
		if (ret < 0) {
			if (ret != -EDEADLK)
				drm_dbg_kms(&i915->drm,
					    "Encoder config failure: %d\n",
					    ret);
			return ret;
		}
	}

	/* Set default port clock if not overwritten by the encoder. Needs to be
	 * done afterwards in case the encoder adjusts the mode. */
	if (!pipe_config->port_clock)
		pipe_config->port_clock = pipe_config->hw.adjusted_mode.crtc_clock
			* pipe_config->pixel_multiplier;

	ret = intel_crtc_compute_config(to_intel_crtc(crtc), pipe_config);
	if (ret == -EDEADLK)
		return ret;
	if (ret < 0) {
		drm_dbg_kms(&i915->drm, "CRTC fixup failed\n");
		return ret;
	}

	if (ret == RETRY) {
		if (drm_WARN(&i915->drm, !retry,
			     "loop in pipe configuration computation\n"))
			return -EINVAL;

		drm_dbg_kms(&i915->drm, "CRTC bw constrained, retrying\n");
		retry = false;
		goto encoder_retry;
	}

	/* Dithering seems to not pass-through bits correctly when it should, so
	 * only enable it on 6bpc panels and when its not a compliance
	 * test requesting 6bpc video pattern.
	 */
	pipe_config->dither = (pipe_config->pipe_bpp == 6*3) &&
		!pipe_config->dither_force_disable;
	drm_dbg_kms(&i915->drm,
		    "hw max bpp: %i, pipe bpp: %i, dithering: %i\n",
		    base_bpp, pipe_config->pipe_bpp, pipe_config->dither);

	return 0;
}

static int
intel_modeset_pipe_config_late(struct intel_crtc_state *crtc_state)
{
	struct intel_atomic_state *state =
		to_intel_atomic_state(crtc_state->uapi.state);
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_connector_state *conn_state;
	struct drm_connector *connector;
	int i;

	for_each_new_connector_in_state(&state->base, connector,
					conn_state, i) {
		struct intel_encoder *encoder =
			to_intel_encoder(conn_state->best_encoder);
		int ret;

		if (conn_state->crtc != &crtc->base ||
		    !encoder->compute_config_late)
			continue;

		ret = encoder->compute_config_late(encoder, crtc_state,
						   conn_state);
		if (ret)
			return ret;
	}

	return 0;
}

bool intel_fuzzy_clock_check(int clock1, int clock2)
{
	int diff;

	if (clock1 == clock2)
		return true;

	if (!clock1 || !clock2)
		return false;

	diff = abs(clock1 - clock2);

	if (((((diff + clock1 + clock2) * 100)) / (clock1 + clock2)) < 105)
		return true;

	return false;
}

static bool
intel_compare_m_n(unsigned int m, unsigned int n,
		  unsigned int m2, unsigned int n2,
		  bool exact)
{
	if (m == m2 && n == n2)
		return true;

	if (exact || !m || !n || !m2 || !n2)
		return false;

	BUILD_BUG_ON(DATA_LINK_M_N_MASK > INT_MAX);

	if (n > n2) {
		while (n > n2) {
			m2 <<= 1;
			n2 <<= 1;
		}
	} else if (n < n2) {
		while (n < n2) {
			m <<= 1;
			n <<= 1;
		}
	}

	if (n != n2)
		return false;

	return intel_fuzzy_clock_check(m, m2);
}

static bool
intel_compare_link_m_n(const struct intel_link_m_n *m_n,
		       const struct intel_link_m_n *m2_n2,
		       bool exact)
{
	return m_n->tu == m2_n2->tu &&
		intel_compare_m_n(m_n->gmch_m, m_n->gmch_n,
				  m2_n2->gmch_m, m2_n2->gmch_n, exact) &&
		intel_compare_m_n(m_n->link_m, m_n->link_n,
				  m2_n2->link_m, m2_n2->link_n, exact);
}

static bool
intel_compare_infoframe(const union hdmi_infoframe *a,
			const union hdmi_infoframe *b)
{
	return memcmp(a, b, sizeof(*a)) == 0;
}

static bool
intel_compare_dp_vsc_sdp(const struct drm_dp_vsc_sdp *a,
			 const struct drm_dp_vsc_sdp *b)
{
	return memcmp(a, b, sizeof(*a)) == 0;
}

static void
pipe_config_infoframe_mismatch(struct drm_i915_private *dev_priv,
			       bool fastset, const char *name,
			       const union hdmi_infoframe *a,
			       const union hdmi_infoframe *b)
{
	if (fastset) {
		if (!drm_debug_enabled(DRM_UT_KMS))
			return;

		drm_dbg_kms(&dev_priv->drm,
			    "fastset mismatch in %s infoframe\n", name);
		drm_dbg_kms(&dev_priv->drm, "expected:\n");
		hdmi_infoframe_log(KERN_DEBUG, dev_priv->drm.dev, a);
		drm_dbg_kms(&dev_priv->drm, "found:\n");
		hdmi_infoframe_log(KERN_DEBUG, dev_priv->drm.dev, b);
	} else {
		drm_err(&dev_priv->drm, "mismatch in %s infoframe\n", name);
		drm_err(&dev_priv->drm, "expected:\n");
		hdmi_infoframe_log(KERN_ERR, dev_priv->drm.dev, a);
		drm_err(&dev_priv->drm, "found:\n");
		hdmi_infoframe_log(KERN_ERR, dev_priv->drm.dev, b);
	}
}

static void
pipe_config_dp_vsc_sdp_mismatch(struct drm_i915_private *dev_priv,
				bool fastset, const char *name,
				const struct drm_dp_vsc_sdp *a,
				const struct drm_dp_vsc_sdp *b)
{
	if (fastset) {
		if (!drm_debug_enabled(DRM_UT_KMS))
			return;

		drm_dbg_kms(&dev_priv->drm,
			    "fastset mismatch in %s dp sdp\n", name);
		drm_dbg_kms(&dev_priv->drm, "expected:\n");
		drm_dp_vsc_sdp_log(KERN_DEBUG, dev_priv->drm.dev, a);
		drm_dbg_kms(&dev_priv->drm, "found:\n");
		drm_dp_vsc_sdp_log(KERN_DEBUG, dev_priv->drm.dev, b);
	} else {
		drm_err(&dev_priv->drm, "mismatch in %s dp sdp\n", name);
		drm_err(&dev_priv->drm, "expected:\n");
		drm_dp_vsc_sdp_log(KERN_ERR, dev_priv->drm.dev, a);
		drm_err(&dev_priv->drm, "found:\n");
		drm_dp_vsc_sdp_log(KERN_ERR, dev_priv->drm.dev, b);
	}
}

static void __printf(4, 5)
pipe_config_mismatch(bool fastset, const struct intel_crtc *crtc,
		     const char *name, const char *format, ...)
{
	struct drm_i915_private *i915 = to_i915(crtc->base.dev);
	struct va_format vaf;
	va_list args;

	va_start(args, format);
	vaf.fmt = format;
	vaf.va = &args;

	if (fastset)
		drm_dbg_kms(&i915->drm,
			    "[CRTC:%d:%s] fastset mismatch in %s %pV\n",
			    crtc->base.base.id, crtc->base.name, name, &vaf);
	else
		drm_err(&i915->drm, "[CRTC:%d:%s] mismatch in %s %pV\n",
			crtc->base.base.id, crtc->base.name, name, &vaf);

	va_end(args);
}

static bool fastboot_enabled(struct drm_i915_private *dev_priv)
{
	if (dev_priv->params.fastboot != -1)
		return dev_priv->params.fastboot;

	/* Enable fastboot by default on Skylake and newer */
	if (INTEL_GEN(dev_priv) >= 9)
		return true;

	/* Enable fastboot by default on VLV and CHV */
	if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
		return true;

	/* Disabled by default on all others */
	return false;
}

static bool
intel_pipe_config_compare(const struct intel_crtc_state *current_config,
			  const struct intel_crtc_state *pipe_config,
			  bool fastset)
{
	struct drm_i915_private *dev_priv = to_i915(current_config->uapi.crtc->dev);
	struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc);
	bool ret = true;
	u32 bp_gamma = 0;
	bool fixup_inherited = fastset &&
		current_config->inherited && !pipe_config->inherited;

	if (fixup_inherited && !fastboot_enabled(dev_priv)) {
		drm_dbg_kms(&dev_priv->drm,
			    "initial modeset and fastboot not set\n");
		ret = false;
	}

#define PIPE_CONF_CHECK_X(name) do { \
	if (current_config->name != pipe_config->name) { \
		pipe_config_mismatch(fastset, crtc, __stringify(name), \
				     "(expected 0x%08x, found 0x%08x)", \
				     current_config->name, \
				     pipe_config->name); \
		ret = false; \
	} \
} while (0)

#define PIPE_CONF_CHECK_I(name) do { \
	if (current_config->name != pipe_config->name) { \
		pipe_config_mismatch(fastset, crtc, __stringify(name), \
				     "(expected %i, found %i)", \
				     current_config->name, \
				     pipe_config->name); \
		ret = false; \
	} \
} while (0)

#define PIPE_CONF_CHECK_BOOL(name) do { \
	if (current_config->name != pipe_config->name) { \
		pipe_config_mismatch(fastset, crtc,  __stringify(name), \
				     "(expected %s, found %s)", \
				     yesno(current_config->name), \
				     yesno(pipe_config->name)); \
		ret = false; \
	} \
} while (0)

/*
 * Checks state where we only read out the enabling, but not the entire
 * state itself (like full infoframes or ELD for audio). These states
 * require a full modeset on bootup to fix up.
 */
#define PIPE_CONF_CHECK_BOOL_INCOMPLETE(name) do { \
	if (!fixup_inherited || (!current_config->name && !pipe_config->name)) { \
		PIPE_CONF_CHECK_BOOL(name); \
	} else { \
		pipe_config_mismatch(fastset, crtc, __stringify(name), \
				     "unable to verify whether state matches exactly, forcing modeset (expected %s, found %s)", \
				     yesno(current_config->name), \
				     yesno(pipe_config->name)); \
		ret = false; \
	} \
} while (0)

#define PIPE_CONF_CHECK_P(name) do { \
	if (current_config->name != pipe_config->name) { \
		pipe_config_mismatch(fastset, crtc, __stringify(name), \
				     "(expected %p, found %p)", \
				     current_config->name, \
				     pipe_config->name); \
		ret = false; \
	} \
} while (0)

#define PIPE_CONF_CHECK_M_N(name) do { \
	if (!intel_compare_link_m_n(&current_config->name, \
				    &pipe_config->name,\
				    !fastset)) { \
		pipe_config_mismatch(fastset, crtc, __stringify(name), \
				     "(expected tu %i gmch %i/%i link %i/%i, " \
				     "found tu %i, gmch %i/%i link %i/%i)", \
				     current_config->name.tu, \
				     current_config->name.gmch_m, \
				     current_config->name.gmch_n, \
				     current_config->name.link_m, \
				     current_config->name.link_n, \
				     pipe_config->name.tu, \
				     pipe_config->name.gmch_m, \
				     pipe_config->name.gmch_n, \
				     pipe_config->name.link_m, \
				     pipe_config->name.link_n); \
		ret = false; \
	} \
} while (0)

/* This is required for BDW+ where there is only one set of registers for
 * switching between high and low RR.
 * This macro can be used whenever a comparison has to be made between one
 * hw state and multiple sw state variables.
 */
#define PIPE_CONF_CHECK_M_N_ALT(name, alt_name) do { \
	if (!intel_compare_link_m_n(&current_config->name, \
				    &pipe_config->name, !fastset) && \
	    !intel_compare_link_m_n(&current_config->alt_name, \
				    &pipe_config->name, !fastset)) { \
		pipe_config_mismatch(fastset, crtc, __stringify(name), \
				     "(expected tu %i gmch %i/%i link %i/%i, " \
				     "or tu %i gmch %i/%i link %i/%i, " \
				     "found tu %i, gmch %i/%i link %i/%i)", \
				     current_config->name.tu, \
				     current_config->name.gmch_m, \
				     current_config->name.gmch_n, \
				     current_config->name.link_m, \
				     current_config->name.link_n, \
				     current_config->alt_name.tu, \
				     current_config->alt_name.gmch_m, \
				     current_config->alt_name.gmch_n, \
				     current_config->alt_name.link_m, \
				     current_config->alt_name.link_n, \
				     pipe_config->name.tu, \
				     pipe_config->name.gmch_m, \
				     pipe_config->name.gmch_n, \
				     pipe_config->name.link_m, \
				     pipe_config->name.link_n); \
		ret = false; \
	} \
} while (0)

#define PIPE_CONF_CHECK_FLAGS(name, mask) do { \
	if ((current_config->name ^ pipe_config->name) & (mask)) { \
		pipe_config_mismatch(fastset, crtc, __stringify(name), \
				     "(%x) (expected %i, found %i)", \
				     (mask), \
				     current_config->name & (mask), \
				     pipe_config->name & (mask)); \
		ret = false; \
	} \
} while (0)

#define PIPE_CONF_CHECK_CLOCK_FUZZY(name) do { \
	if (!intel_fuzzy_clock_check(current_config->name, pipe_config->name)) { \
		pipe_config_mismatch(fastset, crtc, __stringify(name), \
				     "(expected %i, found %i)", \
				     current_config->name, \
				     pipe_config->name); \
		ret = false; \
	} \
} while (0)

#define PIPE_CONF_CHECK_INFOFRAME(name) do { \
	if (!intel_compare_infoframe(&current_config->infoframes.name, \
				     &pipe_config->infoframes.name)) { \
		pipe_config_infoframe_mismatch(dev_priv, fastset, __stringify(name), \
					       &current_config->infoframes.name, \
					       &pipe_config->infoframes.name); \
		ret = false; \
	} \
} while (0)

#define PIPE_CONF_CHECK_DP_VSC_SDP(name) do { \
	if (!current_config->has_psr && !pipe_config->has_psr && \
	    !intel_compare_dp_vsc_sdp(&current_config->infoframes.name, \
				      &pipe_config->infoframes.name)) { \
		pipe_config_dp_vsc_sdp_mismatch(dev_priv, fastset, __stringify(name), \
						&current_config->infoframes.name, \
						&pipe_config->infoframes.name); \
		ret = false; \
	} \
} while (0)

#define PIPE_CONF_CHECK_COLOR_LUT(name1, name2, bit_precision) do { \
	if (current_config->name1 != pipe_config->name1) { \
		pipe_config_mismatch(fastset, crtc, __stringify(name1), \
				"(expected %i, found %i, won't compare lut values)", \
				current_config->name1, \
				pipe_config->name1); \
		ret = false;\
	} else { \
		if (!intel_color_lut_equal(current_config->name2, \
					pipe_config->name2, pipe_config->name1, \
					bit_precision)) { \
			pipe_config_mismatch(fastset, crtc, __stringify(name2), \
					"hw_state doesn't match sw_state"); \
			ret = false; \
		} \
	} \
} while (0)

#define PIPE_CONF_QUIRK(quirk) \
	((current_config->quirks | pipe_config->quirks) & (quirk))

	PIPE_CONF_CHECK_I(cpu_transcoder);

	PIPE_CONF_CHECK_BOOL(has_pch_encoder);
	PIPE_CONF_CHECK_I(fdi_lanes);
	PIPE_CONF_CHECK_M_N(fdi_m_n);

	PIPE_CONF_CHECK_I(lane_count);
	PIPE_CONF_CHECK_X(lane_lat_optim_mask);

	if (INTEL_GEN(dev_priv) < 8) {
		PIPE_CONF_CHECK_M_N(dp_m_n);

		if (current_config->has_drrs)
			PIPE_CONF_CHECK_M_N(dp_m2_n2);
	} else
		PIPE_CONF_CHECK_M_N_ALT(dp_m_n, dp_m2_n2);

	PIPE_CONF_CHECK_X(output_types);

	PIPE_CONF_CHECK_I(hw.adjusted_mode.crtc_hdisplay);
	PIPE_CONF_CHECK_I(hw.adjusted_mode.crtc_htotal);
	PIPE_CONF_CHECK_I(hw.adjusted_mode.crtc_hblank_start);
	PIPE_CONF_CHECK_I(hw.adjusted_mode.crtc_hblank_end);
	PIPE_CONF_CHECK_I(hw.adjusted_mode.crtc_hsync_start);
	PIPE_CONF_CHECK_I(hw.adjusted_mode.crtc_hsync_end);

	PIPE_CONF_CHECK_I(hw.adjusted_mode.crtc_vdisplay);
	PIPE_CONF_CHECK_I(hw.adjusted_mode.crtc_vtotal);
	PIPE_CONF_CHECK_I(hw.adjusted_mode.crtc_vblank_start);
	PIPE_CONF_CHECK_I(hw.adjusted_mode.crtc_vblank_end);
	PIPE_CONF_CHECK_I(hw.adjusted_mode.crtc_vsync_start);
	PIPE_CONF_CHECK_I(hw.adjusted_mode.crtc_vsync_end);

	PIPE_CONF_CHECK_I(pixel_multiplier);
	PIPE_CONF_CHECK_I(output_format);
	PIPE_CONF_CHECK_BOOL(has_hdmi_sink);
	if ((INTEL_GEN(dev_priv) < 8 && !IS_HASWELL(dev_priv)) ||
	    IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
		PIPE_CONF_CHECK_BOOL(limited_color_range);

	PIPE_CONF_CHECK_BOOL(hdmi_scrambling);
	PIPE_CONF_CHECK_BOOL(hdmi_high_tmds_clock_ratio);
	PIPE_CONF_CHECK_BOOL(has_infoframe);
	PIPE_CONF_CHECK_BOOL(fec_enable);

	PIPE_CONF_CHECK_BOOL_INCOMPLETE(has_audio);

	PIPE_CONF_CHECK_FLAGS(hw.adjusted_mode.flags,
			      DRM_MODE_FLAG_INTERLACE);

	if (!PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS)) {
		PIPE_CONF_CHECK_FLAGS(hw.adjusted_mode.flags,
				      DRM_MODE_FLAG_PHSYNC);
		PIPE_CONF_CHECK_FLAGS(hw.adjusted_mode.flags,
				      DRM_MODE_FLAG_NHSYNC);
		PIPE_CONF_CHECK_FLAGS(hw.adjusted_mode.flags,
				      DRM_MODE_FLAG_PVSYNC);
		PIPE_CONF_CHECK_FLAGS(hw.adjusted_mode.flags,
				      DRM_MODE_FLAG_NVSYNC);
	}

	PIPE_CONF_CHECK_X(gmch_pfit.control);
	/* pfit ratios are autocomputed by the hw on gen4+ */
	if (INTEL_GEN(dev_priv) < 4)
		PIPE_CONF_CHECK_X(gmch_pfit.pgm_ratios);
	PIPE_CONF_CHECK_X(gmch_pfit.lvds_border_bits);

	/*
	 * Changing the EDP transcoder input mux
	 * (A_ONOFF vs. A_ON) requires a full modeset.
	 */
	PIPE_CONF_CHECK_BOOL(pch_pfit.force_thru);

	if (!fastset) {
		PIPE_CONF_CHECK_I(pipe_src_w);
		PIPE_CONF_CHECK_I(pipe_src_h);

		PIPE_CONF_CHECK_BOOL(pch_pfit.enabled);
		if (current_config->pch_pfit.enabled) {
			PIPE_CONF_CHECK_I(pch_pfit.dst.x1);
			PIPE_CONF_CHECK_I(pch_pfit.dst.y1);
			PIPE_CONF_CHECK_I(pch_pfit.dst.x2);
			PIPE_CONF_CHECK_I(pch_pfit.dst.y2);
		}

		PIPE_CONF_CHECK_I(scaler_state.scaler_id);
		PIPE_CONF_CHECK_CLOCK_FUZZY(pixel_rate);

		PIPE_CONF_CHECK_X(gamma_mode);
		if (IS_CHERRYVIEW(dev_priv))
			PIPE_CONF_CHECK_X(cgm_mode);
		else
			PIPE_CONF_CHECK_X(csc_mode);
		PIPE_CONF_CHECK_BOOL(gamma_enable);
		PIPE_CONF_CHECK_BOOL(csc_enable);

		PIPE_CONF_CHECK_I(linetime);
		PIPE_CONF_CHECK_I(ips_linetime);

		bp_gamma = intel_color_get_gamma_bit_precision(pipe_config);
		if (bp_gamma)
			PIPE_CONF_CHECK_COLOR_LUT(gamma_mode, hw.gamma_lut, bp_gamma);
	}

	PIPE_CONF_CHECK_BOOL(double_wide);

	PIPE_CONF_CHECK_P(shared_dpll);
	PIPE_CONF_CHECK_X(dpll_hw_state.dpll);
	PIPE_CONF_CHECK_X(dpll_hw_state.dpll_md);
	PIPE_CONF_CHECK_X(dpll_hw_state.fp0);
	PIPE_CONF_CHECK_X(dpll_hw_state.fp1);
	PIPE_CONF_CHECK_X(dpll_hw_state.wrpll);
	PIPE_CONF_CHECK_X(dpll_hw_state.spll);
	PIPE_CONF_CHECK_X(dpll_hw_state.ctrl1);
	PIPE_CONF_CHECK_X(dpll_hw_state.cfgcr1);
	PIPE_CONF_CHECK_X(dpll_hw_state.cfgcr2);
	PIPE_CONF_CHECK_X(dpll_hw_state.cfgcr0);
	PIPE_CONF_CHECK_X(dpll_hw_state.ebb0);
	PIPE_CONF_CHECK_X(dpll_hw_state.ebb4);
	PIPE_CONF_CHECK_X(dpll_hw_state.pll0);
	PIPE_CONF_CHECK_X(dpll_hw_state.pll1);
	PIPE_CONF_CHECK_X(dpll_hw_state.pll2);
	PIPE_CONF_CHECK_X(dpll_hw_state.pll3);
	PIPE_CONF_CHECK_X(dpll_hw_state.pll6);
	PIPE_CONF_CHECK_X(dpll_hw_state.pll8);
	PIPE_CONF_CHECK_X(dpll_hw_state.pll9);
	PIPE_CONF_CHECK_X(dpll_hw_state.pll10);
	PIPE_CONF_CHECK_X(dpll_hw_state.pcsdw12);
	PIPE_CONF_CHECK_X(dpll_hw_state.mg_refclkin_ctl);
	PIPE_CONF_CHECK_X(dpll_hw_state.mg_clktop2_coreclkctl1);
	PIPE_CONF_CHECK_X(dpll_hw_state.mg_clktop2_hsclkctl);
	PIPE_CONF_CHECK_X(dpll_hw_state.mg_pll_div0);
	PIPE_CONF_CHECK_X(dpll_hw_state.mg_pll_div1);
	PIPE_CONF_CHECK_X(dpll_hw_state.mg_pll_lf);
	PIPE_CONF_CHECK_X(dpll_hw_state.mg_pll_frac_lock);
	PIPE_CONF_CHECK_X(dpll_hw_state.mg_pll_ssc);
	PIPE_CONF_CHECK_X(dpll_hw_state.mg_pll_bias);
	PIPE_CONF_CHECK_X(dpll_hw_state.mg_pll_tdc_coldst_bias);

	PIPE_CONF_CHECK_X(dsi_pll.ctrl);
	PIPE_CONF_CHECK_X(dsi_pll.div);

	if (IS_G4X(dev_priv) || INTEL_GEN(dev_priv) >= 5)
		PIPE_CONF_CHECK_I(pipe_bpp);

	PIPE_CONF_CHECK_CLOCK_FUZZY(hw.adjusted_mode.crtc_clock);
	PIPE_CONF_CHECK_CLOCK_FUZZY(port_clock);

	PIPE_CONF_CHECK_I(min_voltage_level);

	PIPE_CONF_CHECK_X(infoframes.enable);
	PIPE_CONF_CHECK_X(infoframes.gcp);
	PIPE_CONF_CHECK_INFOFRAME(avi);
	PIPE_CONF_CHECK_INFOFRAME(spd);
	PIPE_CONF_CHECK_INFOFRAME(hdmi);
	PIPE_CONF_CHECK_INFOFRAME(drm);
	PIPE_CONF_CHECK_DP_VSC_SDP(vsc);

	PIPE_CONF_CHECK_X(sync_mode_slaves_mask);
	PIPE_CONF_CHECK_I(master_transcoder);

	PIPE_CONF_CHECK_I(dsc.compression_enable);
	PIPE_CONF_CHECK_I(dsc.dsc_split);
	PIPE_CONF_CHECK_I(dsc.compressed_bpp);

	PIPE_CONF_CHECK_I(mst_master_transcoder);

#undef PIPE_CONF_CHECK_X
#undef PIPE_CONF_CHECK_I
#undef PIPE_CONF_CHECK_BOOL
#undef PIPE_CONF_CHECK_BOOL_INCOMPLETE
#undef PIPE_CONF_CHECK_P
#undef PIPE_CONF_CHECK_FLAGS
#undef PIPE_CONF_CHECK_CLOCK_FUZZY
#undef PIPE_CONF_CHECK_COLOR_LUT
#undef PIPE_CONF_QUIRK

	return ret;
}

static void intel_pipe_config_sanity_check(struct drm_i915_private *dev_priv,
					   const struct intel_crtc_state *pipe_config)
{
	if (pipe_config->has_pch_encoder) {
		int fdi_dotclock = intel_dotclock_calculate(intel_fdi_link_freq(dev_priv, pipe_config),
							    &pipe_config->fdi_m_n);
		int dotclock = pipe_config->hw.adjusted_mode.crtc_clock;

		/*
		 * FDI already provided one idea for the dotclock.
		 * Yell if the encoder disagrees.
		 */
		drm_WARN(&dev_priv->drm,
			 !intel_fuzzy_clock_check(fdi_dotclock, dotclock),
			 "FDI dotclock and encoder dotclock mismatch, fdi: %i, encoder: %i\n",
			 fdi_dotclock, dotclock);
	}
}

static void verify_wm_state(struct intel_crtc *crtc,
			    struct intel_crtc_state *new_crtc_state)
{
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	struct skl_hw_state {
		struct skl_ddb_entry ddb_y[I915_MAX_PLANES];
		struct skl_ddb_entry ddb_uv[I915_MAX_PLANES];
		struct skl_pipe_wm wm;
	} *hw;
	struct skl_pipe_wm *sw_wm;
	struct skl_ddb_entry *hw_ddb_entry, *sw_ddb_entry;
	u8 hw_enabled_slices;
	const enum pipe pipe = crtc->pipe;
	int plane, level, max_level = ilk_wm_max_level(dev_priv);

	if (INTEL_GEN(dev_priv) < 9 || !new_crtc_state->hw.active)
		return;

	hw = kzalloc(sizeof(*hw), GFP_KERNEL);
	if (!hw)
		return;

	skl_pipe_wm_get_hw_state(crtc, &hw->wm);
	sw_wm = &new_crtc_state->wm.skl.optimal;

	skl_pipe_ddb_get_hw_state(crtc, hw->ddb_y, hw->ddb_uv);

	hw_enabled_slices = intel_enabled_dbuf_slices_mask(dev_priv);

	if (INTEL_GEN(dev_priv) >= 11 &&
	    hw_enabled_slices != dev_priv->dbuf.enabled_slices)
		drm_err(&dev_priv->drm,
			"mismatch in DBUF Slices (expected 0x%x, got 0x%x)\n",
			dev_priv->dbuf.enabled_slices,
			hw_enabled_slices);

	/* planes */
	for_each_universal_plane(dev_priv, pipe, plane) {
		struct skl_plane_wm *hw_plane_wm, *sw_plane_wm;

		hw_plane_wm = &hw->wm.planes[plane];
		sw_plane_wm = &sw_wm->planes[plane];

		/* Watermarks */
		for (level = 0; level <= max_level; level++) {
			if (skl_wm_level_equals(&hw_plane_wm->wm[level],
						&sw_plane_wm->wm[level]) ||
			    (level == 0 && skl_wm_level_equals(&hw_plane_wm->wm[level],
							       &sw_plane_wm->sagv_wm0)))
				continue;

			drm_err(&dev_priv->drm,
				"mismatch in WM pipe %c plane %d level %d (expected e=%d b=%u l=%u, got e=%d b=%u l=%u)\n",
				pipe_name(pipe), plane + 1, level,
				sw_plane_wm->wm[level].plane_en,
				sw_plane_wm->wm[level].plane_res_b,
				sw_plane_wm->wm[level].plane_res_l,
				hw_plane_wm->wm[level].plane_en,
				hw_plane_wm->wm[level].plane_res_b,
				hw_plane_wm->wm[level].plane_res_l);
		}

		if (!skl_wm_level_equals(&hw_plane_wm->trans_wm,
					 &sw_plane_wm->trans_wm)) {
			drm_err(&dev_priv->drm,
				"mismatch in trans WM pipe %c plane %d (expected e=%d b=%u l=%u, got e=%d b=%u l=%u)\n",
				pipe_name(pipe), plane + 1,
				sw_plane_wm->trans_wm.plane_en,
				sw_plane_wm->trans_wm.plane_res_b,
				sw_plane_wm->trans_wm.plane_res_l,
				hw_plane_wm->trans_wm.plane_en,
				hw_plane_wm->trans_wm.plane_res_b,
				hw_plane_wm->trans_wm.plane_res_l);
		}

		/* DDB */
		hw_ddb_entry = &hw->ddb_y[plane];
		sw_ddb_entry = &new_crtc_state->wm.skl.plane_ddb_y[plane];

		if (!skl_ddb_entry_equal(hw_ddb_entry, sw_ddb_entry)) {
			drm_err(&dev_priv->drm,
				"mismatch in DDB state pipe %c plane %d (expected (%u,%u), found (%u,%u))\n",
				pipe_name(pipe), plane + 1,
				sw_ddb_entry->start, sw_ddb_entry->end,
				hw_ddb_entry->start, hw_ddb_entry->end);
		}
	}

	/*
	 * cursor
	 * If the cursor plane isn't active, we may not have updated it's ddb
	 * allocation. In that case since the ddb allocation will be updated
	 * once the plane becomes visible, we can skip this check
	 */
	if (1) {
		struct skl_plane_wm *hw_plane_wm, *sw_plane_wm;

		hw_plane_wm = &hw->wm.planes[PLANE_CURSOR];
		sw_plane_wm = &sw_wm->planes[PLANE_CURSOR];

		/* Watermarks */
		for (level = 0; level <= max_level; level++) {
			if (skl_wm_level_equals(&hw_plane_wm->wm[level],
						&sw_plane_wm->wm[level]) ||
			    (level == 0 && skl_wm_level_equals(&hw_plane_wm->wm[level],
							       &sw_plane_wm->sagv_wm0)))
				continue;

			drm_err(&dev_priv->drm,
				"mismatch in WM pipe %c cursor level %d (expected e=%d b=%u l=%u, got e=%d b=%u l=%u)\n",
				pipe_name(pipe), level,
				sw_plane_wm->wm[level].plane_en,
				sw_plane_wm->wm[level].plane_res_b,
				sw_plane_wm->wm[level].plane_res_l,
				hw_plane_wm->wm[level].plane_en,
				hw_plane_wm->wm[level].plane_res_b,
				hw_plane_wm->wm[level].plane_res_l);
		}

		if (!skl_wm_level_equals(&hw_plane_wm->trans_wm,
					 &sw_plane_wm->trans_wm)) {
			drm_err(&dev_priv->drm,
				"mismatch in trans WM pipe %c cursor (expected e=%d b=%u l=%u, got e=%d b=%u l=%u)\n",
				pipe_name(pipe),
				sw_plane_wm->trans_wm.plane_en,
				sw_plane_wm->trans_wm.plane_res_b,
				sw_plane_wm->trans_wm.plane_res_l,
				hw_plane_wm->trans_wm.plane_en,
				hw_plane_wm->trans_wm.plane_res_b,
				hw_plane_wm->trans_wm.plane_res_l);
		}

		/* DDB */
		hw_ddb_entry = &hw->ddb_y[PLANE_CURSOR];
		sw_ddb_entry = &new_crtc_state->wm.skl.plane_ddb_y[PLANE_CURSOR];

		if (!skl_ddb_entry_equal(hw_ddb_entry, sw_ddb_entry)) {
			drm_err(&dev_priv->drm,
				"mismatch in DDB state pipe %c cursor (expected (%u,%u), found (%u,%u))\n",
				pipe_name(pipe),
				sw_ddb_entry->start, sw_ddb_entry->end,
				hw_ddb_entry->start, hw_ddb_entry->end);
		}
	}

	kfree(hw);
}

static void
verify_connector_state(struct intel_atomic_state *state,
		       struct intel_crtc *crtc)
{
	struct drm_connector *connector;
	struct drm_connector_state *new_conn_state;
	int i;

	for_each_new_connector_in_state(&state->base, connector, new_conn_state, i) {
		struct drm_encoder *encoder = connector->encoder;
		struct intel_crtc_state *crtc_state = NULL;

		if (new_conn_state->crtc != &crtc->base)
			continue;

		if (crtc)
			crtc_state = intel_atomic_get_new_crtc_state(state, crtc);

		intel_connector_verify_state(crtc_state, new_conn_state);

		I915_STATE_WARN(new_conn_state->best_encoder != encoder,
		     "connector's atomic encoder doesn't match legacy encoder\n");
	}
}

static void
verify_encoder_state(struct drm_i915_private *dev_priv, struct intel_atomic_state *state)
{
	struct intel_encoder *encoder;
	struct drm_connector *connector;
	struct drm_connector_state *old_conn_state, *new_conn_state;
	int i;

	for_each_intel_encoder(&dev_priv->drm, encoder) {
		bool enabled = false, found = false;
		enum pipe pipe;

		drm_dbg_kms(&dev_priv->drm, "[ENCODER:%d:%s]\n",
			    encoder->base.base.id,
			    encoder->base.name);

		for_each_oldnew_connector_in_state(&state->base, connector, old_conn_state,
						   new_conn_state, i) {
			if (old_conn_state->best_encoder == &encoder->base)
				found = true;

			if (new_conn_state->best_encoder != &encoder->base)
				continue;
			found = enabled = true;

			I915_STATE_WARN(new_conn_state->crtc !=
					encoder->base.crtc,
			     "connector's crtc doesn't match encoder crtc\n");
		}

		if (!found)
			continue;

		I915_STATE_WARN(!!encoder->base.crtc != enabled,
		     "encoder's enabled state mismatch "
		     "(expected %i, found %i)\n",
		     !!encoder->base.crtc, enabled);

		if (!encoder->base.crtc) {
			bool active;

			active = encoder->get_hw_state(encoder, &pipe);
			I915_STATE_WARN(active,
			     "encoder detached but still enabled on pipe %c.\n",
			     pipe_name(pipe));
		}
	}
}

static void
verify_crtc_state(struct intel_crtc *crtc,
		  struct intel_crtc_state *old_crtc_state,
		  struct intel_crtc_state *new_crtc_state)
{
	struct drm_device *dev = crtc->base.dev;
	struct drm_i915_private *dev_priv = to_i915(dev);
	struct intel_encoder *encoder;
	struct intel_crtc_state *pipe_config = old_crtc_state;
	struct drm_atomic_state *state = old_crtc_state->uapi.state;

	__drm_atomic_helper_crtc_destroy_state(&old_crtc_state->uapi);
	intel_crtc_free_hw_state(old_crtc_state);
	intel_crtc_state_reset(old_crtc_state, crtc);
	old_crtc_state->uapi.state = state;

	drm_dbg_kms(&dev_priv->drm, "[CRTC:%d:%s]\n", crtc->base.base.id,
		    crtc->base.name);

	pipe_config->hw.enable = new_crtc_state->hw.enable;

	pipe_config->hw.active =
		dev_priv->display.get_pipe_config(crtc, pipe_config);

	/* we keep both pipes enabled on 830 */
	if (IS_I830(dev_priv) && pipe_config->hw.active)
		pipe_config->hw.active = new_crtc_state->hw.active;

	I915_STATE_WARN(new_crtc_state->hw.active != pipe_config->hw.active,
			"crtc active state doesn't match with hw state "
			"(expected %i, found %i)\n",
			new_crtc_state->hw.active, pipe_config->hw.active);

	I915_STATE_WARN(crtc->active != new_crtc_state->hw.active,
			"transitional active state does not match atomic hw state "
			"(expected %i, found %i)\n",
			new_crtc_state->hw.active, crtc->active);

	for_each_encoder_on_crtc(dev, &crtc->base, encoder) {
		enum pipe pipe;
		bool active;

		active = encoder->get_hw_state(encoder, &pipe);
		I915_STATE_WARN(active != new_crtc_state->hw.active,
				"[ENCODER:%i] active %i with crtc active %i\n",
				encoder->base.base.id, active,
				new_crtc_state->hw.active);

		I915_STATE_WARN(active && crtc->pipe != pipe,
				"Encoder connected to wrong pipe %c\n",
				pipe_name(pipe));

		if (active)
			encoder->get_config(encoder, pipe_config);
	}

	intel_crtc_compute_pixel_rate(pipe_config);

	if (!new_crtc_state->hw.active)
		return;

	intel_pipe_config_sanity_check(dev_priv, pipe_config);

	if (!intel_pipe_config_compare(new_crtc_state,
				       pipe_config, false)) {
		I915_STATE_WARN(1, "pipe state doesn't match!\n");
		intel_dump_pipe_config(pipe_config, NULL, "[hw state]");
		intel_dump_pipe_config(new_crtc_state, NULL, "[sw state]");
	}
}

static void
intel_verify_planes(struct intel_atomic_state *state)
{
	struct intel_plane *plane;
	const struct intel_plane_state *plane_state;
	int i;

	for_each_new_intel_plane_in_state(state, plane,
					  plane_state, i)
		assert_plane(plane, plane_state->planar_slave ||
			     plane_state->uapi.visible);
}

static void
verify_single_dpll_state(struct drm_i915_private *dev_priv,
			 struct intel_shared_dpll *pll,
			 struct intel_crtc *crtc,
			 struct intel_crtc_state *new_crtc_state)
{
	struct intel_dpll_hw_state dpll_hw_state;
	unsigned int crtc_mask;
	bool active;

	memset(&dpll_hw_state, 0, sizeof(dpll_hw_state));

	drm_dbg_kms(&dev_priv->drm, "%s\n", pll->info->name);

	active = pll->info->funcs->get_hw_state(dev_priv, pll, &dpll_hw_state);

	if (!(pll->info->flags & INTEL_DPLL_ALWAYS_ON)) {
		I915_STATE_WARN(!pll->on && pll->active_mask,
		     "pll in active use but not on in sw tracking\n");
		I915_STATE_WARN(pll->on && !pll->active_mask,
		     "pll is on but not used by any active crtc\n");
		I915_STATE_WARN(pll->on != active,
		     "pll on state mismatch (expected %i, found %i)\n",
		     pll->on, active);
	}

	if (!crtc) {
		I915_STATE_WARN(pll->active_mask & ~pll->state.crtc_mask,
				"more active pll users than references: %x vs %x\n",
				pll->active_mask, pll->state.crtc_mask);

		return;
	}

	crtc_mask = drm_crtc_mask(&crtc->base);

	if (new_crtc_state->hw.active)
		I915_STATE_WARN(!(pll->active_mask & crtc_mask),
				"pll active mismatch (expected pipe %c in active mask 0x%02x)\n",
				pipe_name(crtc->pipe), pll->active_mask);
	else
		I915_STATE_WARN(pll->active_mask & crtc_mask,
				"pll active mismatch (didn't expect pipe %c in active mask 0x%02x)\n",
				pipe_name(crtc->pipe), pll->active_mask);

	I915_STATE_WARN(!(pll->state.crtc_mask & crtc_mask),
			"pll enabled crtcs mismatch (expected 0x%x in 0x%02x)\n",
			crtc_mask, pll->state.crtc_mask);

	I915_STATE_WARN(pll->on && memcmp(&pll->state.hw_state,
					  &dpll_hw_state,
					  sizeof(dpll_hw_state)),
			"pll hw state mismatch\n");
}

static void
verify_shared_dpll_state(struct intel_crtc *crtc,
			 struct intel_crtc_state *old_crtc_state,
			 struct intel_crtc_state *new_crtc_state)
{
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);

	if (new_crtc_state->shared_dpll)
		verify_single_dpll_state(dev_priv, new_crtc_state->shared_dpll, crtc, new_crtc_state);

	if (old_crtc_state->shared_dpll &&
	    old_crtc_state->shared_dpll != new_crtc_state->shared_dpll) {
		unsigned int crtc_mask = drm_crtc_mask(&crtc->base);
		struct intel_shared_dpll *pll = old_crtc_state->shared_dpll;

		I915_STATE_WARN(pll->active_mask & crtc_mask,
				"pll active mismatch (didn't expect pipe %c in active mask)\n",
				pipe_name(crtc->pipe));
		I915_STATE_WARN(pll->state.crtc_mask & crtc_mask,
				"pll enabled crtcs mismatch (found %x in enabled mask)\n",
				pipe_name(crtc->pipe));
	}
}

static void
intel_modeset_verify_crtc(struct intel_crtc *crtc,
			  struct intel_atomic_state *state,
			  struct intel_crtc_state *old_crtc_state,
			  struct intel_crtc_state *new_crtc_state)
{
	if (!needs_modeset(new_crtc_state) && !new_crtc_state->update_pipe)
		return;

	verify_wm_state(crtc, new_crtc_state);
	verify_connector_state(state, crtc);
	verify_crtc_state(crtc, old_crtc_state, new_crtc_state);
	verify_shared_dpll_state(crtc, old_crtc_state, new_crtc_state);
}

static void
verify_disabled_dpll_state(struct drm_i915_private *dev_priv)
{
	int i;

	for (i = 0; i < dev_priv->dpll.num_shared_dpll; i++)
		verify_single_dpll_state(dev_priv,
					 &dev_priv->dpll.shared_dplls[i],
					 NULL, NULL);
}

static void
intel_modeset_verify_disabled(struct drm_i915_private *dev_priv,
			      struct intel_atomic_state *state)
{
	verify_encoder_state(dev_priv, state);
	verify_connector_state(state, NULL);
	verify_disabled_dpll_state(dev_priv);
}

static void
intel_crtc_update_active_timings(const struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	const struct drm_display_mode *adjusted_mode =
		&crtc_state->hw.adjusted_mode;

	drm_calc_timestamping_constants(&crtc->base, adjusted_mode);

	crtc->mode_flags = crtc_state->mode_flags;

	/*
	 * The scanline counter increments at the leading edge of hsync.
	 *
	 * On most platforms it starts counting from vtotal-1 on the
	 * first active line. That means the scanline counter value is
	 * always one less than what we would expect. Ie. just after
	 * start of vblank, which also occurs at start of hsync (on the
	 * last active line), the scanline counter will read vblank_start-1.
	 *
	 * On gen2 the scanline counter starts counting from 1 instead
	 * of vtotal-1, so we have to subtract one (or rather add vtotal-1
	 * to keep the value positive), instead of adding one.
	 *
	 * On HSW+ the behaviour of the scanline counter depends on the output
	 * type. For DP ports it behaves like most other platforms, but on HDMI
	 * there's an extra 1 line difference. So we need to add two instead of
	 * one to the value.
	 *
	 * On VLV/CHV DSI the scanline counter would appear to increment
	 * approx. 1/3 of a scanline before start of vblank. Unfortunately
	 * that means we can't tell whether we're in vblank or not while
	 * we're on that particular line. We must still set scanline_offset
	 * to 1 so that the vblank timestamps come out correct when we query
	 * the scanline counter from within the vblank interrupt handler.
	 * However if queried just before the start of vblank we'll get an
	 * answer that's slightly in the future.
	 */
	if (IS_GEN(dev_priv, 2)) {
		int vtotal;

		vtotal = adjusted_mode->crtc_vtotal;
		if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
			vtotal /= 2;

		crtc->scanline_offset = vtotal - 1;
	} else if (HAS_DDI(dev_priv) &&
		   intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) {
		crtc->scanline_offset = 2;
	} else {
		crtc->scanline_offset = 1;
	}
}

static void intel_modeset_clear_plls(struct intel_atomic_state *state)
{
	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
	struct intel_crtc_state *new_crtc_state;
	struct intel_crtc *crtc;
	int i;

	if (!dev_priv->display.crtc_compute_clock)
		return;

	for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
		if (!needs_modeset(new_crtc_state))
			continue;

		intel_release_shared_dplls(state, crtc);
	}
}

/*
 * This implements the workaround described in the "notes" section of the mode
 * set sequence documentation. When going from no pipes or single pipe to
 * multiple pipes, and planes are enabled after the pipe, we need to wait at
 * least 2 vblanks on the first pipe before enabling planes on the second pipe.
 */
static int hsw_mode_set_planes_workaround(struct intel_atomic_state *state)
{
	struct intel_crtc_state *crtc_state;
	struct intel_crtc *crtc;
	struct intel_crtc_state *first_crtc_state = NULL;
	struct intel_crtc_state *other_crtc_state = NULL;
	enum pipe first_pipe = INVALID_PIPE, enabled_pipe = INVALID_PIPE;
	int i;

	/* look at all crtc's that are going to be enabled in during modeset */
	for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) {
		if (!crtc_state->hw.active ||
		    !needs_modeset(crtc_state))
			continue;

		if (first_crtc_state) {
			other_crtc_state = crtc_state;
			break;
		} else {
			first_crtc_state = crtc_state;
			first_pipe = crtc->pipe;
		}
	}

	/* No workaround needed? */
	if (!first_crtc_state)
		return 0;

	/* w/a possibly needed, check how many crtc's are already enabled. */
	for_each_intel_crtc(state->base.dev, crtc) {
		crtc_state = intel_atomic_get_crtc_state(&state->base, crtc);
		if (IS_ERR(crtc_state))
			return PTR_ERR(crtc_state);

		crtc_state->hsw_workaround_pipe = INVALID_PIPE;

		if (!crtc_state->hw.active ||
		    needs_modeset(crtc_state))
			continue;

		/* 2 or more enabled crtcs means no need for w/a */
		if (enabled_pipe != INVALID_PIPE)
			return 0;

		enabled_pipe = crtc->pipe;
	}

	if (enabled_pipe != INVALID_PIPE)
		first_crtc_state->hsw_workaround_pipe = enabled_pipe;
	else if (other_crtc_state)
		other_crtc_state->hsw_workaround_pipe = first_pipe;

	return 0;
}

u8 intel_calc_active_pipes(struct intel_atomic_state *state,
			   u8 active_pipes)
{
	const struct intel_crtc_state *crtc_state;
	struct intel_crtc *crtc;
	int i;

	for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) {
		if (crtc_state->hw.active)
			active_pipes |= BIT(crtc->pipe);
		else
			active_pipes &= ~BIT(crtc->pipe);
	}

	return active_pipes;
}

static int intel_modeset_checks(struct intel_atomic_state *state)
{
	struct drm_i915_private *dev_priv = to_i915(state->base.dev);

	state->modeset = true;

	if (IS_HASWELL(dev_priv))
		return hsw_mode_set_planes_workaround(state);

	return 0;
}

/*
 * Handle calculation of various watermark data at the end of the atomic check
 * phase.  The code here should be run after the per-crtc and per-plane 'check'
 * handlers to ensure that all derived state has been updated.
 */
static int calc_watermark_data(struct intel_atomic_state *state)
{
	struct drm_device *dev = state->base.dev;
	struct drm_i915_private *dev_priv = to_i915(dev);

	/* Is there platform-specific watermark information to calculate? */
	if (dev_priv->display.compute_global_watermarks)
		return dev_priv->display.compute_global_watermarks(state);

	return 0;
}

static void intel_crtc_check_fastset(const struct intel_crtc_state *old_crtc_state,
				     struct intel_crtc_state *new_crtc_state)
{
	if (!intel_pipe_config_compare(old_crtc_state, new_crtc_state, true))
		return;

	new_crtc_state->uapi.mode_changed = false;
	new_crtc_state->update_pipe = true;
}

static void intel_crtc_copy_fastset(const struct intel_crtc_state *old_crtc_state,
				    struct intel_crtc_state *new_crtc_state)
{
	/*
	 * If we're not doing the full modeset we want to
	 * keep the current M/N values as they may be
	 * sufficiently different to the computed values
	 * to cause problems.
	 *
	 * FIXME: should really copy more fuzzy state here
	 */
	new_crtc_state->fdi_m_n = old_crtc_state->fdi_m_n;
	new_crtc_state->dp_m_n = old_crtc_state->dp_m_n;
	new_crtc_state->dp_m2_n2 = old_crtc_state->dp_m2_n2;
	new_crtc_state->has_drrs = old_crtc_state->has_drrs;
}

static int intel_crtc_add_planes_to_state(struct intel_atomic_state *state,
					  struct intel_crtc *crtc,
					  u8 plane_ids_mask)
{
	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
	struct intel_plane *plane;

	for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, plane) {
		struct intel_plane_state *plane_state;

		if ((plane_ids_mask & BIT(plane->id)) == 0)
			continue;

		plane_state = intel_atomic_get_plane_state(state, plane);
		if (IS_ERR(plane_state))
			return PTR_ERR(plane_state);
	}

	return 0;
}

static bool active_planes_affects_min_cdclk(struct drm_i915_private *dev_priv)
{
	/* See {hsw,vlv,ivb}_plane_ratio() */
	return IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv) ||
		IS_CHERRYVIEW(dev_priv) || IS_VALLEYVIEW(dev_priv) ||
		IS_IVYBRIDGE(dev_priv) || (INTEL_GEN(dev_priv) >= 11);
}

static int intel_atomic_check_planes(struct intel_atomic_state *state)
{
	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
	struct intel_crtc_state *old_crtc_state, *new_crtc_state;
	struct intel_plane_state *plane_state;
	struct intel_plane *plane;
	struct intel_crtc *crtc;
	int i, ret;

	ret = icl_add_linked_planes(state);
	if (ret)
		return ret;

	for_each_new_intel_plane_in_state(state, plane, plane_state, i) {
		ret = intel_plane_atomic_check(state, plane);
		if (ret) {
			drm_dbg_atomic(&dev_priv->drm,
				       "[PLANE:%d:%s] atomic driver check failed\n",
				       plane->base.base.id, plane->base.name);
			return ret;
		}
	}

	for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
					    new_crtc_state, i) {
		u8 old_active_planes, new_active_planes;

		ret = icl_check_nv12_planes(new_crtc_state);
		if (ret)
			return ret;

		/*
		 * On some platforms the number of active planes affects
		 * the planes' minimum cdclk calculation. Add such planes
		 * to the state before we compute the minimum cdclk.
		 */
		if (!active_planes_affects_min_cdclk(dev_priv))
			continue;

		old_active_planes = old_crtc_state->active_planes & ~BIT(PLANE_CURSOR);
		new_active_planes = new_crtc_state->active_planes & ~BIT(PLANE_CURSOR);

		/*
		 * Not only the number of planes, but if the plane configuration had
		 * changed might already mean we need to recompute min CDCLK,
		 * because different planes might consume different amount of Dbuf bandwidth
		 * according to formula: Bw per plane = Pixel rate * bpp * pipe/plane scale factor
		 */
		if (old_active_planes == new_active_planes)
			continue;

		ret = intel_crtc_add_planes_to_state(state, crtc, new_active_planes);
		if (ret)
			return ret;
	}

	return 0;
}

static int intel_atomic_check_cdclk(struct intel_atomic_state *state,
				    bool *need_cdclk_calc)
{
	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
	const struct intel_cdclk_state *old_cdclk_state;
	const struct intel_cdclk_state *new_cdclk_state;
	struct intel_plane_state *plane_state;
	struct intel_bw_state *new_bw_state;
	struct intel_plane *plane;
	int min_cdclk = 0;
	enum pipe pipe;
	int ret;
	int i;
	/*
	 * active_planes bitmask has been updated, and potentially
	 * affected planes are part of the state. We can now
	 * compute the minimum cdclk for each plane.
	 */
	for_each_new_intel_plane_in_state(state, plane, plane_state, i) {
		ret = intel_plane_calc_min_cdclk(state, plane, need_cdclk_calc);
		if (ret)
			return ret;
	}

	old_cdclk_state = intel_atomic_get_old_cdclk_state(state);
	new_cdclk_state = intel_atomic_get_new_cdclk_state(state);

	if (new_cdclk_state &&
	    old_cdclk_state->force_min_cdclk != new_cdclk_state->force_min_cdclk)
		*need_cdclk_calc = true;

	ret = dev_priv->display.bw_calc_min_cdclk(state);
	if (ret)
		return ret;

	new_bw_state = intel_atomic_get_new_bw_state(state);

	if (!new_cdclk_state || !new_bw_state)
		return 0;

	for_each_pipe(dev_priv, pipe) {
		min_cdclk = max(new_cdclk_state->min_cdclk[pipe], min_cdclk);

		/*
		 * Currently do this change only if we need to increase
		 */
		if (new_bw_state->min_cdclk > min_cdclk)
			*need_cdclk_calc = true;
	}

	return 0;
}

static int intel_atomic_check_crtcs(struct intel_atomic_state *state)
{
	struct intel_crtc_state *crtc_state;
	struct intel_crtc *crtc;
	int i;

	for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) {
		int ret = intel_crtc_atomic_check(state, crtc);
		struct drm_i915_private *i915 = to_i915(crtc->base.dev);
		if (ret) {
			drm_dbg_atomic(&i915->drm,
				       "[CRTC:%d:%s] atomic driver check failed\n",
				       crtc->base.base.id, crtc->base.name);
			return ret;
		}
	}

	return 0;
}

static bool intel_cpu_transcoders_need_modeset(struct intel_atomic_state *state,
					       u8 transcoders)
{
	const struct intel_crtc_state *new_crtc_state;
	struct intel_crtc *crtc;
	int i;

	for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
		if (new_crtc_state->hw.enable &&
		    transcoders & BIT(new_crtc_state->cpu_transcoder) &&
		    needs_modeset(new_crtc_state))
			return true;
	}

	return false;
}

/**
 * intel_atomic_check - validate state object
 * @dev: drm device
 * @_state: state to validate
 */
static int intel_atomic_check(struct drm_device *dev,
			      struct drm_atomic_state *_state)
{
	struct drm_i915_private *dev_priv = to_i915(dev);
	struct intel_atomic_state *state = to_intel_atomic_state(_state);
	struct intel_crtc_state *old_crtc_state, *new_crtc_state;
	struct intel_crtc *crtc;
	int ret, i;
	bool any_ms = false;

	for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
					    new_crtc_state, i) {
		if (new_crtc_state->inherited != old_crtc_state->inherited)
			new_crtc_state->uapi.mode_changed = true;
	}

	ret = drm_atomic_helper_check_modeset(dev, &state->base);
	if (ret)
		goto fail;

	for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
					    new_crtc_state, i) {
		if (!needs_modeset(new_crtc_state)) {
			/* Light copy */
			intel_crtc_copy_uapi_to_hw_state_nomodeset(new_crtc_state);

			continue;
		}

		ret = intel_crtc_prepare_cleared_state(new_crtc_state);
		if (ret)
			goto fail;

		if (!new_crtc_state->hw.enable)
			continue;

		ret = intel_modeset_pipe_config(new_crtc_state);
		if (ret)
			goto fail;
	}

	for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
					    new_crtc_state, i) {
		if (!needs_modeset(new_crtc_state))
			continue;

		ret = intel_modeset_pipe_config_late(new_crtc_state);
		if (ret)
			goto fail;

		intel_crtc_check_fastset(old_crtc_state, new_crtc_state);
	}

	/**
	 * Check if fastset is allowed by external dependencies like other
	 * pipes and transcoders.
	 *
	 * Right now it only forces a fullmodeset when the MST master
	 * transcoder did not changed but the pipe of the master transcoder
	 * needs a fullmodeset so all slaves also needs to do a fullmodeset or
	 * in case of port synced crtcs, if one of the synced crtcs
	 * needs a full modeset, all other synced crtcs should be
	 * forced a full modeset.
	 */
	for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
		if (!new_crtc_state->hw.enable || needs_modeset(new_crtc_state))
			continue;

		if (intel_dp_mst_is_slave_trans(new_crtc_state)) {
			enum transcoder master = new_crtc_state->mst_master_transcoder;

			if (intel_cpu_transcoders_need_modeset(state, BIT(master))) {
				new_crtc_state->uapi.mode_changed = true;
				new_crtc_state->update_pipe = false;
			}
		}

		if (is_trans_port_sync_mode(new_crtc_state)) {
			u8 trans = new_crtc_state->sync_mode_slaves_mask;

			if (new_crtc_state->master_transcoder != INVALID_TRANSCODER)
				trans |= BIT(new_crtc_state->master_transcoder);

			if (intel_cpu_transcoders_need_modeset(state, trans)) {
				new_crtc_state->uapi.mode_changed = true;
				new_crtc_state->update_pipe = false;
			}
		}
	}

	for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
					    new_crtc_state, i) {
		if (needs_modeset(new_crtc_state)) {
			any_ms = true;
			continue;
		}

		if (!new_crtc_state->update_pipe)
			continue;

		intel_crtc_copy_fastset(old_crtc_state, new_crtc_state);
	}

	if (any_ms && !check_digital_port_conflicts(state)) {
		drm_dbg_kms(&dev_priv->drm,
			    "rejecting conflicting digital port configuration\n");
		ret = -EINVAL;
		goto fail;
	}

	ret = drm_dp_mst_atomic_check(&state->base);
	if (ret)
		goto fail;

	ret = intel_atomic_check_planes(state);
	if (ret)
		goto fail;

	/*
	 * distrust_bios_wm will force a full dbuf recomputation
	 * but the hardware state will only get updated accordingly
	 * if state->modeset==true. Hence distrust_bios_wm==true &&
	 * state->modeset==false is an invalid combination which
	 * would cause the hardware and software dbuf state to get
	 * out of sync. We must prevent that.
	 *
	 * FIXME clean up this mess and introduce better
	 * state tracking for dbuf.
	 */
	if (dev_priv->wm.distrust_bios_wm)
		any_ms = true;

	intel_fbc_choose_crtc(dev_priv, state);
	ret = calc_watermark_data(state);
	if (ret)
		goto fail;

	ret = intel_bw_atomic_check(state);
	if (ret)
		goto fail;

	ret = intel_atomic_check_cdclk(state, &any_ms);
	if (ret)
		goto fail;

	if (any_ms) {
		ret = intel_modeset_checks(state);
		if (ret)
			goto fail;

		ret = intel_modeset_calc_cdclk(state);
		if (ret)
			return ret;

		intel_modeset_clear_plls(state);
	}

	ret = intel_atomic_check_crtcs(state);
	if (ret)
		goto fail;

	for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
					    new_crtc_state, i) {
		if (!needs_modeset(new_crtc_state) &&
		    !new_crtc_state->update_pipe)
			continue;

		intel_dump_pipe_config(new_crtc_state, state,
				       needs_modeset(new_crtc_state) ?
				       "[modeset]" : "[fastset]");
	}

	return 0;

 fail:
	if (ret == -EDEADLK)
		return ret;

	/*
	 * FIXME would probably be nice to know which crtc specifically
	 * caused the failure, in cases where we can pinpoint it.
	 */
	for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
					    new_crtc_state, i)
		intel_dump_pipe_config(new_crtc_state, state, "[failed]");

	return ret;
}

static int intel_atomic_prepare_commit(struct intel_atomic_state *state)
{
	struct intel_crtc_state *crtc_state;
	struct intel_crtc *crtc;
	int i, ret;

	ret = drm_atomic_helper_prepare_planes(state->base.dev, &state->base);
	if (ret < 0)
		return ret;

	for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) {
		bool mode_changed = needs_modeset(crtc_state);

		if (mode_changed || crtc_state->update_pipe ||
		    crtc_state->uapi.color_mgmt_changed) {
			intel_dsb_prepare(crtc_state);
		}
	}

	return 0;
}

u32 intel_crtc_get_vblank_counter(struct intel_crtc *crtc)
{
	struct drm_device *dev = crtc->base.dev;
	struct drm_vblank_crtc *vblank = &dev->vblank[drm_crtc_index(&crtc->base)];

	if (!vblank->max_vblank_count)
		return (u32)drm_crtc_accurate_vblank_count(&crtc->base);

	return crtc->base.funcs->get_vblank_counter(&crtc->base);
}

void intel_crtc_arm_fifo_underrun(struct intel_crtc *crtc,
				  struct intel_crtc_state *crtc_state)
{
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);

	if (!IS_GEN(dev_priv, 2) || crtc_state->active_planes)
		intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe, true);

	if (crtc_state->has_pch_encoder) {
		enum pipe pch_transcoder =
			intel_crtc_pch_transcoder(crtc);

		intel_set_pch_fifo_underrun_reporting(dev_priv, pch_transcoder, true);
	}
}

static void intel_pipe_fastset(const struct intel_crtc_state *old_crtc_state,
			       const struct intel_crtc_state *new_crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);

	/*
	 * Update pipe size and adjust fitter if needed: the reason for this is
	 * that in compute_mode_changes we check the native mode (not the pfit
	 * mode) to see if we can flip rather than do a full mode set. In the
	 * fastboot case, we'll flip, but if we don't update the pipesrc and
	 * pfit state, we'll end up with a big fb scanned out into the wrong
	 * sized surface.
	 */
	intel_set_pipe_src_size(new_crtc_state);

	/* on skylake this is done by detaching scalers */
	if (INTEL_GEN(dev_priv) >= 9) {
		skl_detach_scalers(new_crtc_state);

		if (new_crtc_state->pch_pfit.enabled)
			skl_pfit_enable(new_crtc_state);
	} else if (HAS_PCH_SPLIT(dev_priv)) {
		if (new_crtc_state->pch_pfit.enabled)
			ilk_pfit_enable(new_crtc_state);
		else if (old_crtc_state->pch_pfit.enabled)
			ilk_pfit_disable(old_crtc_state);
	}

	/*
	 * The register is supposedly single buffered so perhaps
	 * not 100% correct to do this here. But SKL+ calculate
	 * this based on the adjust pixel rate so pfit changes do
	 * affect it and so it must be updated for fastsets.
	 * HSW/BDW only really need this here for fastboot, after
	 * that the value should not change without a full modeset.
	 */
	if (INTEL_GEN(dev_priv) >= 9 ||
	    IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv))
		hsw_set_linetime_wm(new_crtc_state);

	if (INTEL_GEN(dev_priv) >= 11)
		icl_set_pipe_chicken(crtc);
}

static void commit_pipe_config(struct intel_atomic_state *state,
			       struct intel_crtc *crtc)
{
	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
	const struct intel_crtc_state *old_crtc_state =
		intel_atomic_get_old_crtc_state(state, crtc);
	const struct intel_crtc_state *new_crtc_state =
		intel_atomic_get_new_crtc_state(state, crtc);
	bool modeset = needs_modeset(new_crtc_state);

	/*
	 * During modesets pipe configuration was programmed as the
	 * CRTC was enabled.
	 */
	if (!modeset) {
		if (new_crtc_state->uapi.color_mgmt_changed ||
		    new_crtc_state->update_pipe)
			intel_color_commit(new_crtc_state);

		if (INTEL_GEN(dev_priv) >= 9)
			skl_detach_scalers(new_crtc_state);

		if (INTEL_GEN(dev_priv) >= 9 || IS_BROADWELL(dev_priv))
			bdw_set_pipemisc(new_crtc_state);

		if (new_crtc_state->update_pipe)
			intel_pipe_fastset(old_crtc_state, new_crtc_state);

		intel_psr2_program_trans_man_trk_ctl(new_crtc_state);
	}

	if (dev_priv->display.atomic_update_watermarks)
		dev_priv->display.atomic_update_watermarks(state, crtc);
}

static void intel_enable_crtc(struct intel_atomic_state *state,
			      struct intel_crtc *crtc)
{
	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
	const struct intel_crtc_state *new_crtc_state =
		intel_atomic_get_new_crtc_state(state, crtc);

	if (!needs_modeset(new_crtc_state))
		return;

	intel_crtc_update_active_timings(new_crtc_state);

	dev_priv->display.crtc_enable(state, crtc);

	/* vblanks work again, re-enable pipe CRC. */
	intel_crtc_enable_pipe_crc(crtc);
}

static void intel_update_crtc(struct intel_atomic_state *state,
			      struct intel_crtc *crtc)
{
	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
	const struct intel_crtc_state *old_crtc_state =
		intel_atomic_get_old_crtc_state(state, crtc);
	struct intel_crtc_state *new_crtc_state =
		intel_atomic_get_new_crtc_state(state, crtc);
	bool modeset = needs_modeset(new_crtc_state);

	if (!modeset) {
		if (new_crtc_state->preload_luts &&
		    (new_crtc_state->uapi.color_mgmt_changed ||
		     new_crtc_state->update_pipe))
			intel_color_load_luts(new_crtc_state);

		intel_pre_plane_update(state, crtc);

		if (new_crtc_state->update_pipe)
			intel_encoders_update_pipe(state, crtc);
	}

	if (new_crtc_state->update_pipe && !new_crtc_state->enable_fbc)
		intel_fbc_disable(crtc);
	else
		intel_fbc_enable(state, crtc);

	/* Perform vblank evasion around commit operation */
	intel_pipe_update_start(new_crtc_state);

	commit_pipe_config(state, crtc);

	if (INTEL_GEN(dev_priv) >= 9)
		skl_update_planes_on_crtc(state, crtc);
	else
		i9xx_update_planes_on_crtc(state, crtc);

	intel_pipe_update_end(new_crtc_state);

	/*
	 * We usually enable FIFO underrun interrupts as part of the
	 * CRTC enable sequence during modesets.  But when we inherit a
	 * valid pipe configuration from the BIOS we need to take care
	 * of enabling them on the CRTC's first fastset.
	 */
	if (new_crtc_state->update_pipe && !modeset &&
	    old_crtc_state->inherited)
		intel_crtc_arm_fifo_underrun(crtc, new_crtc_state);
}


static void intel_old_crtc_state_disables(struct intel_atomic_state *state,
					  struct intel_crtc_state *old_crtc_state,
					  struct intel_crtc_state *new_crtc_state,
					  struct intel_crtc *crtc)
{
	struct drm_i915_private *dev_priv = to_i915(state->base.dev);

	intel_crtc_disable_planes(state, crtc);

	/*
	 * We need to disable pipe CRC before disabling the pipe,
	 * or we race against vblank off.
	 */
	intel_crtc_disable_pipe_crc(crtc);

	dev_priv->display.crtc_disable(state, crtc);
	crtc->active = false;
	intel_fbc_disable(crtc);
	intel_disable_shared_dpll(old_crtc_state);

	/* FIXME unify this for all platforms */
	if (!new_crtc_state->hw.active &&
	    !HAS_GMCH(dev_priv) &&
	    dev_priv->display.initial_watermarks)
		dev_priv->display.initial_watermarks(state, crtc);
}

static void intel_commit_modeset_disables(struct intel_atomic_state *state)
{
	struct intel_crtc_state *new_crtc_state, *old_crtc_state;
	struct intel_crtc *crtc;
	u32 handled = 0;
	int i;

	/* Only disable port sync and MST slaves */
	for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
					    new_crtc_state, i) {
		if (!needs_modeset(new_crtc_state))
			continue;

		if (!old_crtc_state->hw.active)
			continue;

		/* In case of Transcoder port Sync master slave CRTCs can be
		 * assigned in any order and we need to make sure that
		 * slave CRTCs are disabled first and then master CRTC since
		 * Slave vblanks are masked till Master Vblanks.
		 */
		if (!is_trans_port_sync_slave(old_crtc_state) &&
		    !intel_dp_mst_is_slave_trans(old_crtc_state))
			continue;

		intel_pre_plane_update(state, crtc);
		intel_old_crtc_state_disables(state, old_crtc_state,
					      new_crtc_state, crtc);
		handled |= BIT(crtc->pipe);
	}

	/* Disable everything else left on */
	for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
					    new_crtc_state, i) {
		if (!needs_modeset(new_crtc_state) ||
		    (handled & BIT(crtc->pipe)))
			continue;

		intel_pre_plane_update(state, crtc);
		if (old_crtc_state->hw.active)
			intel_old_crtc_state_disables(state, old_crtc_state,
						      new_crtc_state, crtc);
	}
}

static void intel_commit_modeset_enables(struct intel_atomic_state *state)
{
	struct intel_crtc_state *new_crtc_state;
	struct intel_crtc *crtc;
	int i;

	for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
		if (!new_crtc_state->hw.active)
			continue;

		intel_enable_crtc(state, crtc);
		intel_update_crtc(state, crtc);
	}
}

static void skl_commit_modeset_enables(struct intel_atomic_state *state)
{
	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
	struct intel_crtc *crtc;
	struct intel_crtc_state *old_crtc_state, *new_crtc_state;
	struct skl_ddb_entry entries[I915_MAX_PIPES] = {};
	u8 update_pipes = 0, modeset_pipes = 0;
	int i;

	for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
		enum pipe pipe = crtc->pipe;

		if (!new_crtc_state->hw.active)
			continue;

		/* ignore allocations for crtc's that have been turned off. */
		if (!needs_modeset(new_crtc_state)) {
			entries[pipe] = old_crtc_state->wm.skl.ddb;
			update_pipes |= BIT(pipe);
		} else {
			modeset_pipes |= BIT(pipe);
		}
	}

	/*
	 * Whenever the number of active pipes changes, we need to make sure we
	 * update the pipes in the right order so that their ddb allocations
	 * never overlap with each other between CRTC updates. Otherwise we'll
	 * cause pipe underruns and other bad stuff.
	 *
	 * So first lets enable all pipes that do not need a fullmodeset as
	 * those don't have any external dependency.
	 */
	while (update_pipes) {
		for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
						    new_crtc_state, i) {
			enum pipe pipe = crtc->pipe;

			if ((update_pipes & BIT(pipe)) == 0)
				continue;

			if (skl_ddb_allocation_overlaps(&new_crtc_state->wm.skl.ddb,
							entries, I915_MAX_PIPES, pipe))
				continue;

			entries[pipe] = new_crtc_state->wm.skl.ddb;
			update_pipes &= ~BIT(pipe);

			intel_update_crtc(state, crtc);

			/*
			 * If this is an already active pipe, it's DDB changed,
			 * and this isn't the last pipe that needs updating
			 * then we need to wait for a vblank to pass for the
			 * new ddb allocation to take effect.
			 */
			if (!skl_ddb_entry_equal(&new_crtc_state->wm.skl.ddb,
						 &old_crtc_state->wm.skl.ddb) &&
			    (update_pipes | modeset_pipes))
				intel_wait_for_vblank(dev_priv, pipe);
		}
	}

	update_pipes = modeset_pipes;

	/*
	 * Enable all pipes that needs a modeset and do not depends on other
	 * pipes
	 */
	for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
		enum pipe pipe = crtc->pipe;

		if ((modeset_pipes & BIT(pipe)) == 0)
			continue;

		if (intel_dp_mst_is_slave_trans(new_crtc_state) ||
		    is_trans_port_sync_master(new_crtc_state))
			continue;

		modeset_pipes &= ~BIT(pipe);

		intel_enable_crtc(state, crtc);
	}

	/*
	 * Then we enable all remaining pipes that depend on other
	 * pipes: MST slaves and port sync masters.
	 */
	for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
		enum pipe pipe = crtc->pipe;

		if ((modeset_pipes & BIT(pipe)) == 0)
			continue;

		modeset_pipes &= ~BIT(pipe);

		intel_enable_crtc(state, crtc);
	}

	/*
	 * Finally we do the plane updates/etc. for all pipes that got enabled.
	 */
	for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
		enum pipe pipe = crtc->pipe;

		if ((update_pipes & BIT(pipe)) == 0)
			continue;

		drm_WARN_ON(&dev_priv->drm, skl_ddb_allocation_overlaps(&new_crtc_state->wm.skl.ddb,
									entries, I915_MAX_PIPES, pipe));

		entries[pipe] = new_crtc_state->wm.skl.ddb;
		update_pipes &= ~BIT(pipe);

		intel_update_crtc(state, crtc);
	}

	drm_WARN_ON(&dev_priv->drm, modeset_pipes);
	drm_WARN_ON(&dev_priv->drm, update_pipes);
}

static void intel_atomic_helper_free_state(struct drm_i915_private *dev_priv)
{
	struct intel_atomic_state *state, *next;
	struct llist_node *freed;

	freed = llist_del_all(&dev_priv->atomic_helper.free_list);
	llist_for_each_entry_safe(state, next, freed, freed)
		drm_atomic_state_put(&state->base);
}

static void intel_atomic_helper_free_state_worker(struct work_struct *work)
{
	struct drm_i915_private *dev_priv =
		container_of(work, typeof(*dev_priv), atomic_helper.free_work);

	intel_atomic_helper_free_state(dev_priv);
}

static void intel_atomic_commit_fence_wait(struct intel_atomic_state *intel_state)
{
	struct wait_queue_entry wait_fence, wait_reset;
	struct drm_i915_private *dev_priv = to_i915(intel_state->base.dev);

	init_wait_entry(&wait_fence, 0);
	init_wait_entry(&wait_reset, 0);
	for (;;) {
		prepare_to_wait(&intel_state->commit_ready.wait,
				&wait_fence, TASK_UNINTERRUPTIBLE);
		prepare_to_wait(bit_waitqueue(&dev_priv->gt.reset.flags,
					      I915_RESET_MODESET),
				&wait_reset, TASK_UNINTERRUPTIBLE);


		if (i915_sw_fence_done(&intel_state->commit_ready) ||
		    test_bit(I915_RESET_MODESET, &dev_priv->gt.reset.flags))
			break;

		schedule();
	}
	finish_wait(&intel_state->commit_ready.wait, &wait_fence);
	finish_wait(bit_waitqueue(&dev_priv->gt.reset.flags,
				  I915_RESET_MODESET),
		    &wait_reset);
}

static void intel_cleanup_dsbs(struct intel_atomic_state *state)
{
	struct intel_crtc_state *old_crtc_state, *new_crtc_state;
	struct intel_crtc *crtc;
	int i;

	for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
					    new_crtc_state, i)
		intel_dsb_cleanup(old_crtc_state);
}

static void intel_atomic_cleanup_work(struct work_struct *work)
{
	struct intel_atomic_state *state =
		container_of(work, struct intel_atomic_state, base.commit_work);
	struct drm_i915_private *i915 = to_i915(state->base.dev);

	intel_cleanup_dsbs(state);
	drm_atomic_helper_cleanup_planes(&i915->drm, &state->base);
	drm_atomic_helper_commit_cleanup_done(&state->base);
	drm_atomic_state_put(&state->base);

	intel_atomic_helper_free_state(i915);
}

static void intel_atomic_commit_tail(struct intel_atomic_state *state)
{
	struct drm_device *dev = state->base.dev;
	struct drm_i915_private *dev_priv = to_i915(dev);
	struct intel_crtc_state *new_crtc_state, *old_crtc_state;
	struct intel_crtc *crtc;
	u64 put_domains[I915_MAX_PIPES] = {};
	intel_wakeref_t wakeref = 0;
	int i;

	intel_atomic_commit_fence_wait(state);

	drm_atomic_helper_wait_for_dependencies(&state->base);

	if (state->modeset)
		wakeref = intel_display_power_get(dev_priv, POWER_DOMAIN_MODESET);

	for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
					    new_crtc_state, i) {
		if (needs_modeset(new_crtc_state) ||
		    new_crtc_state->update_pipe) {

			put_domains[crtc->pipe] =
				modeset_get_crtc_power_domains(new_crtc_state);
		}
	}

	intel_commit_modeset_disables(state);

	/* FIXME: Eventually get rid of our crtc->config pointer */
	for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i)
		crtc->config = new_crtc_state;

	if (state->modeset) {
		drm_atomic_helper_update_legacy_modeset_state(dev, &state->base);

		intel_set_cdclk_pre_plane_update(state);

		intel_modeset_verify_disabled(dev_priv, state);
	}

	intel_sagv_pre_plane_update(state);

	/* Complete the events for pipes that have now been disabled */
	for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
		bool modeset = needs_modeset(new_crtc_state);

		/* Complete events for now disable pipes here. */
		if (modeset && !new_crtc_state->hw.active && new_crtc_state->uapi.event) {
			spin_lock_irq(&dev->event_lock);
			drm_crtc_send_vblank_event(&crtc->base,
						   new_crtc_state->uapi.event);
			spin_unlock_irq(&dev->event_lock);

			new_crtc_state->uapi.event = NULL;
		}
	}

	if (state->modeset)
		intel_encoders_update_prepare(state);

	intel_dbuf_pre_plane_update(state);

	/* Now enable the clocks, plane, pipe, and connectors that we set up. */
	dev_priv->display.commit_modeset_enables(state);

	if (state->modeset) {
		intel_encoders_update_complete(state);

		intel_set_cdclk_post_plane_update(state);
	}

	/* FIXME: We should call drm_atomic_helper_commit_hw_done() here
	 * already, but still need the state for the delayed optimization. To
	 * fix this:
	 * - wrap the optimization/post_plane_update stuff into a per-crtc work.
	 * - schedule that vblank worker _before_ calling hw_done
	 * - at the start of commit_tail, cancel it _synchrously
	 * - switch over to the vblank wait helper in the core after that since
	 *   we don't need out special handling any more.
	 */
	drm_atomic_helper_wait_for_flip_done(dev, &state->base);

	for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
		if (new_crtc_state->hw.active &&
		    !needs_modeset(new_crtc_state) &&
		    !new_crtc_state->preload_luts &&
		    (new_crtc_state->uapi.color_mgmt_changed ||
		     new_crtc_state->update_pipe))
			intel_color_load_luts(new_crtc_state);
	}

	/*
	 * Now that the vblank has passed, we can go ahead and program the
	 * optimal watermarks on platforms that need two-step watermark
	 * programming.
	 *
	 * TODO: Move this (and other cleanup) to an async worker eventually.
	 */
	for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
					    new_crtc_state, i) {
		/*
		 * Gen2 reports pipe underruns whenever all planes are disabled.
		 * So re-enable underrun reporting after some planes get enabled.
		 *
		 * We do this before .optimize_watermarks() so that we have a
		 * chance of catching underruns with the intermediate watermarks
		 * vs. the new plane configuration.
		 */
		if (IS_GEN(dev_priv, 2) && planes_enabling(old_crtc_state, new_crtc_state))
			intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe, true);

		if (dev_priv->display.optimize_watermarks)
			dev_priv->display.optimize_watermarks(state, crtc);
	}

	intel_dbuf_post_plane_update(state);

	for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
		intel_post_plane_update(state, crtc);

		if (put_domains[i])
			modeset_put_power_domains(dev_priv, put_domains[i]);

		intel_modeset_verify_crtc(crtc, state, old_crtc_state, new_crtc_state);

		/*
		 * DSB cleanup is done in cleanup_work aligning with framebuffer
		 * cleanup. So copy and reset the dsb structure to sync with
		 * commit_done and later do dsb cleanup in cleanup_work.
		 */
		old_crtc_state->dsb = fetch_and_zero(&new_crtc_state->dsb);
	}

	/* Underruns don't always raise interrupts, so check manually */
	intel_check_cpu_fifo_underruns(dev_priv);
	intel_check_pch_fifo_underruns(dev_priv);

	if (state->modeset)
		intel_verify_planes(state);

	intel_sagv_post_plane_update(state);

	drm_atomic_helper_commit_hw_done(&state->base);

	if (state->modeset) {
		/* As one of the primary mmio accessors, KMS has a high
		 * likelihood of triggering bugs in unclaimed access. After we
		 * finish modesetting, see if an error has been flagged, and if
		 * so enable debugging for the next modeset - and hope we catch
		 * the culprit.
		 */
		intel_uncore_arm_unclaimed_mmio_detection(&dev_priv->uncore);
		intel_display_power_put(dev_priv, POWER_DOMAIN_MODESET, wakeref);
	}
	intel_runtime_pm_put(&dev_priv->runtime_pm, state->wakeref);

	/*
	 * Defer the cleanup of the old state to a separate worker to not
	 * impede the current task (userspace for blocking modesets) that
	 * are executed inline. For out-of-line asynchronous modesets/flips,
	 * deferring to a new worker seems overkill, but we would place a
	 * schedule point (cond_resched()) here anyway to keep latencies
	 * down.
	 */
	INIT_WORK(&state->base.commit_work, intel_atomic_cleanup_work);
	queue_work(system_highpri_wq, &state->base.commit_work);
}

static void intel_atomic_commit_work(struct work_struct *work)
{
	struct intel_atomic_state *state =
		container_of(work, struct intel_atomic_state, base.commit_work);

	intel_atomic_commit_tail(state);
}

static int __i915_sw_fence_call
intel_atomic_commit_ready(struct i915_sw_fence *fence,
			  enum i915_sw_fence_notify notify)
{
	struct intel_atomic_state *state =
		container_of(fence, struct intel_atomic_state, commit_ready);

	switch (notify) {
	case FENCE_COMPLETE:
		/* we do blocking waits in the worker, nothing to do here */
		break;
	case FENCE_FREE:
		{
			struct intel_atomic_helper *helper =
				&to_i915(state->base.dev)->atomic_helper;

			if (llist_add(&state->freed, &helper->free_list))
				schedule_work(&helper->free_work);
			break;
		}
	}

	return NOTIFY_DONE;
}

static void intel_atomic_track_fbs(struct intel_atomic_state *state)
{
	struct intel_plane_state *old_plane_state, *new_plane_state;
	struct intel_plane *plane;
	int i;

	for_each_oldnew_intel_plane_in_state(state, plane, old_plane_state,
					     new_plane_state, i)
		intel_frontbuffer_track(to_intel_frontbuffer(old_plane_state->hw.fb),
					to_intel_frontbuffer(new_plane_state->hw.fb),
					plane->frontbuffer_bit);
}

static int intel_atomic_commit(struct drm_device *dev,
			       struct drm_atomic_state *_state,
			       bool nonblock)
{
	struct intel_atomic_state *state = to_intel_atomic_state(_state);
	struct drm_i915_private *dev_priv = to_i915(dev);
	int ret = 0;

	state->wakeref = intel_runtime_pm_get(&dev_priv->runtime_pm);

	drm_atomic_state_get(&state->base);
	i915_sw_fence_init(&state->commit_ready,
			   intel_atomic_commit_ready);

	/*
	 * The intel_legacy_cursor_update() fast path takes care
	 * of avoiding the vblank waits for simple cursor
	 * movement and flips. For cursor on/off and size changes,
	 * we want to perform the vblank waits so that watermark
	 * updates happen during the correct frames. Gen9+ have
	 * double buffered watermarks and so shouldn't need this.
	 *
	 * Unset state->legacy_cursor_update before the call to
	 * drm_atomic_helper_setup_commit() because otherwise
	 * drm_atomic_helper_wait_for_flip_done() is a noop and
	 * we get FIFO underruns because we didn't wait
	 * for vblank.
	 *
	 * FIXME doing watermarks and fb cleanup from a vblank worker
	 * (assuming we had any) would solve these problems.
	 */
	if (INTEL_GEN(dev_priv) < 9 && state->base.legacy_cursor_update) {
		struct intel_crtc_state *new_crtc_state;
		struct intel_crtc *crtc;
		int i;

		for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i)
			if (new_crtc_state->wm.need_postvbl_update ||
			    new_crtc_state->update_wm_post)
				state->base.legacy_cursor_update = false;
	}

	ret = intel_atomic_prepare_commit(state);
	if (ret) {
		drm_dbg_atomic(&dev_priv->drm,
			       "Preparing state failed with %i\n", ret);
		i915_sw_fence_commit(&state->commit_ready);
		intel_runtime_pm_put(&dev_priv->runtime_pm, state->wakeref);
		return ret;
	}

	ret = drm_atomic_helper_setup_commit(&state->base, nonblock);
	if (!ret)
		ret = drm_atomic_helper_swap_state(&state->base, true);
	if (!ret)
		intel_atomic_swap_global_state(state);

	if (ret) {
		struct intel_crtc_state *new_crtc_state;
		struct intel_crtc *crtc;
		int i;

		i915_sw_fence_commit(&state->commit_ready);

		for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i)
			intel_dsb_cleanup(new_crtc_state);

		drm_atomic_helper_cleanup_planes(dev, &state->base);
		intel_runtime_pm_put(&dev_priv->runtime_pm, state->wakeref);
		return ret;
	}
	dev_priv->wm.distrust_bios_wm = false;
	intel_shared_dpll_swap_state(state);
	intel_atomic_track_fbs(state);

	drm_atomic_state_get(&state->base);
	INIT_WORK(&state->base.commit_work, intel_atomic_commit_work);

	i915_sw_fence_commit(&state->commit_ready);
	if (nonblock && state->modeset) {
		queue_work(dev_priv->modeset_wq, &state->base.commit_work);
	} else if (nonblock) {
		queue_work(dev_priv->flip_wq, &state->base.commit_work);
	} else {
		if (state->modeset)
			flush_workqueue(dev_priv->modeset_wq);
		intel_atomic_commit_tail(state);
	}

	return 0;
}

struct wait_rps_boost {
	struct wait_queue_entry wait;

	struct drm_crtc *crtc;
	struct i915_request *request;
};

static int do_rps_boost(struct wait_queue_entry *_wait,
			unsigned mode, int sync, void *key)
{
	struct wait_rps_boost *wait = container_of(_wait, typeof(*wait), wait);
	struct i915_request *rq = wait->request;

	/*
	 * If we missed the vblank, but the request is already running it
	 * is reasonable to assume that it will complete before the next
	 * vblank without our intervention, so leave RPS alone.
	 */
	if (!i915_request_started(rq))
		intel_rps_boost(rq);
	i915_request_put(rq);

	drm_crtc_vblank_put(wait->crtc);

	list_del(&wait->wait.entry);
	kfree(wait);
	return 1;
}

static void add_rps_boost_after_vblank(struct drm_crtc *crtc,
				       struct dma_fence *fence)
{
	struct wait_rps_boost *wait;

	if (!dma_fence_is_i915(fence))
		return;

	if (INTEL_GEN(to_i915(crtc->dev)) < 6)
		return;

	if (drm_crtc_vblank_get(crtc))
		return;

	wait = kmalloc(sizeof(*wait), GFP_KERNEL);
	if (!wait) {
		drm_crtc_vblank_put(crtc);
		return;
	}

	wait->request = to_request(dma_fence_get(fence));
	wait->crtc = crtc;

	wait->wait.func = do_rps_boost;
	wait->wait.flags = 0;

	add_wait_queue(drm_crtc_vblank_waitqueue(crtc), &wait->wait);
}

static int intel_plane_pin_fb(struct intel_plane_state *plane_state)
{
	struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane);
	struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
	struct drm_framebuffer *fb = plane_state->hw.fb;
	struct i915_vma *vma;

	if (plane->id == PLANE_CURSOR &&
	    INTEL_INFO(dev_priv)->display.cursor_needs_physical) {
		struct drm_i915_gem_object *obj = intel_fb_obj(fb);
		const int align = intel_cursor_alignment(dev_priv);
		int err;

		err = i915_gem_object_attach_phys(obj, align);
		if (err)
			return err;
	}

	vma = intel_pin_and_fence_fb_obj(fb,
					 &plane_state->view,
					 intel_plane_uses_fence(plane_state),
					 &plane_state->flags);
	if (IS_ERR(vma))
		return PTR_ERR(vma);

	plane_state->vma = vma;

	return 0;
}

static void intel_plane_unpin_fb(struct intel_plane_state *old_plane_state)
{
	struct i915_vma *vma;

	vma = fetch_and_zero(&old_plane_state->vma);
	if (vma)
		intel_unpin_fb_vma(vma, old_plane_state->flags);
}

static void fb_obj_bump_render_priority(struct drm_i915_gem_object *obj)
{
	struct i915_sched_attr attr = {
		.priority = I915_USER_PRIORITY(I915_PRIORITY_DISPLAY),
	};

	i915_gem_object_wait_priority(obj, 0, &attr);
}

/**
 * intel_prepare_plane_fb - Prepare fb for usage on plane
 * @_plane: drm plane to prepare for
 * @_new_plane_state: the plane state being prepared
 *
 * Prepares a framebuffer for usage on a display plane.  Generally this
 * involves pinning the underlying object and updating the frontbuffer tracking
 * bits.  Some older platforms need special physical address handling for
 * cursor planes.
 *
 * Returns 0 on success, negative error code on failure.
 */
int
intel_prepare_plane_fb(struct drm_plane *_plane,
		       struct drm_plane_state *_new_plane_state)
{
	struct intel_plane *plane = to_intel_plane(_plane);
	struct intel_plane_state *new_plane_state =
		to_intel_plane_state(_new_plane_state);
	struct intel_atomic_state *state =
		to_intel_atomic_state(new_plane_state->uapi.state);
	struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
	const struct intel_plane_state *old_plane_state =
		intel_atomic_get_old_plane_state(state, plane);
	struct drm_i915_gem_object *obj = intel_fb_obj(new_plane_state->hw.fb);
	struct drm_i915_gem_object *old_obj = intel_fb_obj(old_plane_state->hw.fb);
	int ret;

	if (old_obj) {
		const struct intel_crtc_state *crtc_state =
			intel_atomic_get_new_crtc_state(state,
							to_intel_crtc(old_plane_state->hw.crtc));

		/* Big Hammer, we also need to ensure that any pending
		 * MI_WAIT_FOR_EVENT inside a user batch buffer on the
		 * current scanout is retired before unpinning the old
		 * framebuffer. Note that we rely on userspace rendering
		 * into the buffer attached to the pipe they are waiting
		 * on. If not, userspace generates a GPU hang with IPEHR
		 * point to the MI_WAIT_FOR_EVENT.
		 *
		 * This should only fail upon a hung GPU, in which case we
		 * can safely continue.
		 */
		if (needs_modeset(crtc_state)) {
			ret = i915_sw_fence_await_reservation(&state->commit_ready,
							      old_obj->base.resv, NULL,
							      false, 0,
							      GFP_KERNEL);
			if (ret < 0)
				return ret;
		}
	}

	if (new_plane_state->uapi.fence) { /* explicit fencing */
		ret = i915_sw_fence_await_dma_fence(&state->commit_ready,
						    new_plane_state->uapi.fence,
						    i915_fence_timeout(dev_priv),
						    GFP_KERNEL);
		if (ret < 0)
			return ret;
	}

	if (!obj)
		return 0;

	ret = i915_gem_object_pin_pages(obj);
	if (ret)
		return ret;

	ret = intel_plane_pin_fb(new_plane_state);

	i915_gem_object_unpin_pages(obj);
	if (ret)
		return ret;

	fb_obj_bump_render_priority(obj);
	i915_gem_object_flush_frontbuffer(obj, ORIGIN_DIRTYFB);

	if (!new_plane_state->uapi.fence) { /* implicit fencing */
		struct dma_fence *fence;

		ret = i915_sw_fence_await_reservation(&state->commit_ready,
						      obj->base.resv, NULL,
						      false,
						      i915_fence_timeout(dev_priv),
						      GFP_KERNEL);
		if (ret < 0)
			goto unpin_fb;

		fence = dma_resv_get_excl_rcu(obj->base.resv);
		if (fence) {
			add_rps_boost_after_vblank(new_plane_state->hw.crtc,
						   fence);
			dma_fence_put(fence);
		}
	} else {
		add_rps_boost_after_vblank(new_plane_state->hw.crtc,
					   new_plane_state->uapi.fence);
	}

	/*
	 * We declare pageflips to be interactive and so merit a small bias
	 * towards upclocking to deliver the frame on time. By only changing
	 * the RPS thresholds to sample more regularly and aim for higher
	 * clocks we can hopefully deliver low power workloads (like kodi)
	 * that are not quite steady state without resorting to forcing
	 * maximum clocks following a vblank miss (see do_rps_boost()).
	 */
	if (!state->rps_interactive) {
		intel_rps_mark_interactive(&dev_priv->gt.rps, true);
		state->rps_interactive = true;
	}

	return 0;

unpin_fb:
	intel_plane_unpin_fb(new_plane_state);

	return ret;
}

/**
 * intel_cleanup_plane_fb - Cleans up an fb after plane use
 * @plane: drm plane to clean up for
 * @_old_plane_state: the state from the previous modeset
 *
 * Cleans up a framebuffer that has just been removed from a plane.
 */
void
intel_cleanup_plane_fb(struct drm_plane *plane,
		       struct drm_plane_state *_old_plane_state)
{
	struct intel_plane_state *old_plane_state =
		to_intel_plane_state(_old_plane_state);
	struct intel_atomic_state *state =
		to_intel_atomic_state(old_plane_state->uapi.state);
	struct drm_i915_private *dev_priv = to_i915(plane->dev);
	struct drm_i915_gem_object *obj = intel_fb_obj(old_plane_state->hw.fb);

	if (!obj)
		return;

	if (state->rps_interactive) {
		intel_rps_mark_interactive(&dev_priv->gt.rps, false);
		state->rps_interactive = false;
	}

	/* Should only be called after a successful intel_prepare_plane_fb()! */
	intel_plane_unpin_fb(old_plane_state);
}

/**
 * intel_plane_destroy - destroy a plane
 * @plane: plane to destroy
 *
 * Common destruction function for all types of planes (primary, cursor,
 * sprite).
 */
void intel_plane_destroy(struct drm_plane *plane)
{
	drm_plane_cleanup(plane);
	kfree(to_intel_plane(plane));
}

static bool i8xx_plane_format_mod_supported(struct drm_plane *_plane,
					    u32 format, u64 modifier)
{
	switch (modifier) {
	case DRM_FORMAT_MOD_LINEAR:
	case I915_FORMAT_MOD_X_TILED:
		break;
	default:
		return false;
	}

	switch (format) {
	case DRM_FORMAT_C8:
	case DRM_FORMAT_RGB565:
	case DRM_FORMAT_XRGB1555:
	case DRM_FORMAT_XRGB8888:
		return modifier == DRM_FORMAT_MOD_LINEAR ||
			modifier == I915_FORMAT_MOD_X_TILED;
	default:
		return false;
	}
}

static bool i965_plane_format_mod_supported(struct drm_plane *_plane,
					    u32 format, u64 modifier)
{
	switch (modifier) {
	case DRM_FORMAT_MOD_LINEAR:
	case I915_FORMAT_MOD_X_TILED:
		break;
	default:
		return false;
	}

	switch (format) {
	case DRM_FORMAT_C8:
	case DRM_FORMAT_RGB565:
	case DRM_FORMAT_XRGB8888:
	case DRM_FORMAT_XBGR8888:
	case DRM_FORMAT_ARGB8888:
	case DRM_FORMAT_ABGR8888:
	case DRM_FORMAT_XRGB2101010:
	case DRM_FORMAT_XBGR2101010:
	case DRM_FORMAT_ARGB2101010:
	case DRM_FORMAT_ABGR2101010:
	case DRM_FORMAT_XBGR16161616F:
		return modifier == DRM_FORMAT_MOD_LINEAR ||
			modifier == I915_FORMAT_MOD_X_TILED;
	default:
		return false;
	}
}

static bool intel_cursor_format_mod_supported(struct drm_plane *_plane,
					      u32 format, u64 modifier)
{
	return modifier == DRM_FORMAT_MOD_LINEAR &&
		format == DRM_FORMAT_ARGB8888;
}

static const struct drm_plane_funcs i965_plane_funcs = {
	.update_plane = drm_atomic_helper_update_plane,
	.disable_plane = drm_atomic_helper_disable_plane,
	.destroy = intel_plane_destroy,
	.atomic_duplicate_state = intel_plane_duplicate_state,
	.atomic_destroy_state = intel_plane_destroy_state,
	.format_mod_supported = i965_plane_format_mod_supported,
};

static const struct drm_plane_funcs i8xx_plane_funcs = {
	.update_plane = drm_atomic_helper_update_plane,
	.disable_plane = drm_atomic_helper_disable_plane,
	.destroy = intel_plane_destroy,
	.atomic_duplicate_state = intel_plane_duplicate_state,
	.atomic_destroy_state = intel_plane_destroy_state,
	.format_mod_supported = i8xx_plane_format_mod_supported,
};

static int
intel_legacy_cursor_update(struct drm_plane *_plane,
			   struct drm_crtc *_crtc,
			   struct drm_framebuffer *fb,
			   int crtc_x, int crtc_y,
			   unsigned int crtc_w, unsigned int crtc_h,
			   u32 src_x, u32 src_y,
			   u32 src_w, u32 src_h,
			   struct drm_modeset_acquire_ctx *ctx)
{
	struct intel_plane *plane = to_intel_plane(_plane);
	struct intel_crtc *crtc = to_intel_crtc(_crtc);
	struct intel_plane_state *old_plane_state =
		to_intel_plane_state(plane->base.state);
	struct intel_plane_state *new_plane_state;
	struct intel_crtc_state *crtc_state =
		to_intel_crtc_state(crtc->base.state);
	struct intel_crtc_state *new_crtc_state;
	int ret;

	/*
	 * When crtc is inactive or there is a modeset pending,
	 * wait for it to complete in the slowpath
	 */
	if (!crtc_state->hw.active || needs_modeset(crtc_state) ||
	    crtc_state->update_pipe)
		goto slow;

	/*
	 * Don't do an async update if there is an outstanding commit modifying
	 * the plane.  This prevents our async update's changes from getting
	 * overridden by a previous synchronous update's state.
	 */
	if (old_plane_state->uapi.commit &&
	    !try_wait_for_completion(&old_plane_state->uapi.commit->hw_done))
		goto slow;

	/*
	 * If any parameters change that may affect watermarks,
	 * take the slowpath. Only changing fb or position should be
	 * in the fastpath.
	 */
	if (old_plane_state->uapi.crtc != &crtc->base ||
	    old_plane_state->uapi.src_w != src_w ||
	    old_plane_state->uapi.src_h != src_h ||
	    old_plane_state->uapi.crtc_w != crtc_w ||
	    old_plane_state->uapi.crtc_h != crtc_h ||
	    !old_plane_state->uapi.fb != !fb)
		goto slow;

	new_plane_state = to_intel_plane_state(intel_plane_duplicate_state(&plane->base));
	if (!new_plane_state)
		return -ENOMEM;

	new_crtc_state = to_intel_crtc_state(intel_crtc_duplicate_state(&crtc->base));
	if (!new_crtc_state) {
		ret = -ENOMEM;
		goto out_free;
	}

	drm_atomic_set_fb_for_plane(&new_plane_state->uapi, fb);

	new_plane_state->uapi.src_x = src_x;
	new_plane_state->uapi.src_y = src_y;
	new_plane_state->uapi.src_w = src_w;
	new_plane_state->uapi.src_h = src_h;
	new_plane_state->uapi.crtc_x = crtc_x;
	new_plane_state->uapi.crtc_y = crtc_y;
	new_plane_state->uapi.crtc_w = crtc_w;
	new_plane_state->uapi.crtc_h = crtc_h;

	intel_plane_copy_uapi_to_hw_state(new_plane_state, new_plane_state);

	ret = intel_plane_atomic_check_with_state(crtc_state, new_crtc_state,
						  old_plane_state, new_plane_state);
	if (ret)
		goto out_free;

	ret = intel_plane_pin_fb(new_plane_state);
	if (ret)
		goto out_free;

	intel_frontbuffer_flush(to_intel_frontbuffer(new_plane_state->hw.fb),
				ORIGIN_FLIP);
	intel_frontbuffer_track(to_intel_frontbuffer(old_plane_state->hw.fb),
				to_intel_frontbuffer(new_plane_state->hw.fb),
				plane->frontbuffer_bit);

	/* Swap plane state */
	plane->base.state = &new_plane_state->uapi;

	/*
	 * We cannot swap crtc_state as it may be in use by an atomic commit or
	 * page flip that's running simultaneously. If we swap crtc_state and
	 * destroy the old state, we will cause a use-after-free there.
	 *
	 * Only update active_planes, which is needed for our internal
	 * bookkeeping. Either value will do the right thing when updating
	 * planes atomically. If the cursor was part of the atomic update then
	 * we would have taken the slowpath.
	 */
	crtc_state->active_planes = new_crtc_state->active_planes;

	if (new_plane_state->uapi.visible)
		intel_update_plane(plane, crtc_state, new_plane_state);
	else
		intel_disable_plane(plane, crtc_state);

	intel_plane_unpin_fb(old_plane_state);

out_free:
	if (new_crtc_state)
		intel_crtc_destroy_state(&crtc->base, &new_crtc_state->uapi);
	if (ret)
		intel_plane_destroy_state(&plane->base, &new_plane_state->uapi);
	else
		intel_plane_destroy_state(&plane->base, &old_plane_state->uapi);
	return ret;

slow:
	return drm_atomic_helper_update_plane(&plane->base, &crtc->base, fb,
					      crtc_x, crtc_y, crtc_w, crtc_h,
					      src_x, src_y, src_w, src_h, ctx);
}

static const struct drm_plane_funcs intel_cursor_plane_funcs = {
	.update_plane = intel_legacy_cursor_update,
	.disable_plane = drm_atomic_helper_disable_plane,
	.destroy = intel_plane_destroy,
	.atomic_duplicate_state = intel_plane_duplicate_state,
	.atomic_destroy_state = intel_plane_destroy_state,
	.format_mod_supported = intel_cursor_format_mod_supported,
};

static bool i9xx_plane_has_fbc(struct drm_i915_private *dev_priv,
			       enum i9xx_plane_id i9xx_plane)
{
	if (!HAS_FBC(dev_priv))
		return false;

	if (IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv))
		return i9xx_plane == PLANE_A; /* tied to pipe A */
	else if (IS_IVYBRIDGE(dev_priv))
		return i9xx_plane == PLANE_A || i9xx_plane == PLANE_B ||
			i9xx_plane == PLANE_C;
	else if (INTEL_GEN(dev_priv) >= 4)
		return i9xx_plane == PLANE_A || i9xx_plane == PLANE_B;
	else
		return i9xx_plane == PLANE_A;
}

static struct intel_plane *
intel_primary_plane_create(struct drm_i915_private *dev_priv, enum pipe pipe)
{
	struct intel_plane *plane;
	const struct drm_plane_funcs *plane_funcs;
	unsigned int supported_rotations;
	const u32 *formats;
	int num_formats;
	int ret, zpos;

	if (INTEL_GEN(dev_priv) >= 9)
		return skl_universal_plane_create(dev_priv, pipe,
						  PLANE_PRIMARY);

	plane = intel_plane_alloc();
	if (IS_ERR(plane))
		return plane;

	plane->pipe = pipe;
	/*
	 * On gen2/3 only plane A can do FBC, but the panel fitter and LVDS
	 * port is hooked to pipe B. Hence we want plane A feeding pipe B.
	 */
	if (HAS_FBC(dev_priv) && INTEL_GEN(dev_priv) < 4 &&
	    INTEL_NUM_PIPES(dev_priv) == 2)
		plane->i9xx_plane = (enum i9xx_plane_id) !pipe;
	else
		plane->i9xx_plane = (enum i9xx_plane_id) pipe;
	plane->id = PLANE_PRIMARY;
	plane->frontbuffer_bit = INTEL_FRONTBUFFER(pipe, plane->id);

	plane->has_fbc = i9xx_plane_has_fbc(dev_priv, plane->i9xx_plane);
	if (plane->has_fbc) {
		struct intel_fbc *fbc = &dev_priv->fbc;

		fbc->possible_framebuffer_bits |= plane->frontbuffer_bit;
	}

	if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
		formats = vlv_primary_formats;
		num_formats = ARRAY_SIZE(vlv_primary_formats);
	} else if (INTEL_GEN(dev_priv) >= 4) {
		/*
		 * WaFP16GammaEnabling:ivb
		 * "Workaround : When using the 64-bit format, the plane
		 *  output on each color channel has one quarter amplitude.
		 *  It can be brought up to full amplitude by using pipe
		 *  gamma correction or pipe color space conversion to
		 *  multiply the plane output by four."
		 *
		 * There is no dedicated plane gamma for the primary plane,
		 * and using the pipe gamma/csc could conflict with other
		 * planes, so we choose not to expose fp16 on IVB primary
		 * planes. HSW primary planes no longer have this problem.
		 */
		if (IS_IVYBRIDGE(dev_priv)) {
			formats = ivb_primary_formats;
			num_formats = ARRAY_SIZE(ivb_primary_formats);
		} else {
			formats = i965_primary_formats;
			num_formats = ARRAY_SIZE(i965_primary_formats);
		}
	} else {
		formats = i8xx_primary_formats;
		num_formats = ARRAY_SIZE(i8xx_primary_formats);
	}

	if (INTEL_GEN(dev_priv) >= 4)
		plane_funcs = &i965_plane_funcs;
	else
		plane_funcs = &i8xx_plane_funcs;

	if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
		plane->min_cdclk = vlv_plane_min_cdclk;
	else if (IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv))
		plane->min_cdclk = hsw_plane_min_cdclk;
	else if (IS_IVYBRIDGE(dev_priv))
		plane->min_cdclk = ivb_plane_min_cdclk;
	else
		plane->min_cdclk = i9xx_plane_min_cdclk;

	plane->max_stride = i9xx_plane_max_stride;
	plane->update_plane = i9xx_update_plane;
	plane->disable_plane = i9xx_disable_plane;
	plane->get_hw_state = i9xx_plane_get_hw_state;
	plane->check_plane = i9xx_plane_check;

	if (INTEL_GEN(dev_priv) >= 5 || IS_G4X(dev_priv))
		ret = drm_universal_plane_init(&dev_priv->drm, &plane->base,
					       0, plane_funcs,
					       formats, num_formats,
					       i9xx_format_modifiers,
					       DRM_PLANE_TYPE_PRIMARY,
					       "primary %c", pipe_name(pipe));
	else
		ret = drm_universal_plane_init(&dev_priv->drm, &plane->base,
					       0, plane_funcs,
					       formats, num_formats,
					       i9xx_format_modifiers,
					       DRM_PLANE_TYPE_PRIMARY,
					       "plane %c",
					       plane_name(plane->i9xx_plane));
	if (ret)
		goto fail;

	if (IS_CHERRYVIEW(dev_priv) && pipe == PIPE_B) {
		supported_rotations =
			DRM_MODE_ROTATE_0 | DRM_MODE_ROTATE_180 |
			DRM_MODE_REFLECT_X;
	} else if (INTEL_GEN(dev_priv) >= 4) {
		supported_rotations =
			DRM_MODE_ROTATE_0 | DRM_MODE_ROTATE_180;
	} else {
		supported_rotations = DRM_MODE_ROTATE_0;
	}

	if (INTEL_GEN(dev_priv) >= 4)
		drm_plane_create_rotation_property(&plane->base,
						   DRM_MODE_ROTATE_0,
						   supported_rotations);

	zpos = 0;
	drm_plane_create_zpos_immutable_property(&plane->base, zpos);

	drm_plane_helper_add(&plane->base, &intel_plane_helper_funcs);

	return plane;

fail:
	intel_plane_free(plane);

	return ERR_PTR(ret);
}

static struct intel_plane *
intel_cursor_plane_create(struct drm_i915_private *dev_priv,
			  enum pipe pipe)
{
	struct intel_plane *cursor;
	int ret, zpos;

	cursor = intel_plane_alloc();
	if (IS_ERR(cursor))
		return cursor;

	cursor->pipe = pipe;
	cursor->i9xx_plane = (enum i9xx_plane_id) pipe;
	cursor->id = PLANE_CURSOR;
	cursor->frontbuffer_bit = INTEL_FRONTBUFFER(pipe, cursor->id);

	if (IS_I845G(dev_priv) || IS_I865G(dev_priv)) {
		cursor->max_stride = i845_cursor_max_stride;
		cursor->update_plane = i845_update_cursor;
		cursor->disable_plane = i845_disable_cursor;
		cursor->get_hw_state = i845_cursor_get_hw_state;
		cursor->check_plane = i845_check_cursor;
	} else {
		cursor->max_stride = i9xx_cursor_max_stride;
		cursor->update_plane = i9xx_update_cursor;
		cursor->disable_plane = i9xx_disable_cursor;
		cursor->get_hw_state = i9xx_cursor_get_hw_state;
		cursor->check_plane = i9xx_check_cursor;
	}

	cursor->cursor.base = ~0;
	cursor->cursor.cntl = ~0;

	if (IS_I845G(dev_priv) || IS_I865G(dev_priv) || HAS_CUR_FBC(dev_priv))
		cursor->cursor.size = ~0;

	ret = drm_universal_plane_init(&dev_priv->drm, &cursor->base,
				       0, &intel_cursor_plane_funcs,
				       intel_cursor_formats,
				       ARRAY_SIZE(intel_cursor_formats),
				       cursor_format_modifiers,
				       DRM_PLANE_TYPE_CURSOR,
				       "cursor %c", pipe_name(pipe));
	if (ret)
		goto fail;

	if (INTEL_GEN(dev_priv) >= 4)
		drm_plane_create_rotation_property(&cursor->base,
						   DRM_MODE_ROTATE_0,
						   DRM_MODE_ROTATE_0 |
						   DRM_MODE_ROTATE_180);

	zpos = RUNTIME_INFO(dev_priv)->num_sprites[pipe] + 1;
	drm_plane_create_zpos_immutable_property(&cursor->base, zpos);

	if (INTEL_GEN(dev_priv) >= 12)
		drm_plane_enable_fb_damage_clips(&cursor->base);

	drm_plane_helper_add(&cursor->base, &intel_plane_helper_funcs);

	return cursor;

fail:
	intel_plane_free(cursor);

	return ERR_PTR(ret);
}

#define INTEL_CRTC_FUNCS \
	.gamma_set = drm_atomic_helper_legacy_gamma_set, \
	.set_config = drm_atomic_helper_set_config, \
	.destroy = intel_crtc_destroy, \
	.page_flip = drm_atomic_helper_page_flip, \
	.atomic_duplicate_state = intel_crtc_duplicate_state, \
	.atomic_destroy_state = intel_crtc_destroy_state, \
	.set_crc_source = intel_crtc_set_crc_source, \
	.verify_crc_source = intel_crtc_verify_crc_source, \
	.get_crc_sources = intel_crtc_get_crc_sources

static const struct drm_crtc_funcs bdw_crtc_funcs = {
	INTEL_CRTC_FUNCS,

	.get_vblank_counter = g4x_get_vblank_counter,
	.enable_vblank = bdw_enable_vblank,
	.disable_vblank = bdw_disable_vblank,
	.get_vblank_timestamp = intel_crtc_get_vblank_timestamp,
};

static const struct drm_crtc_funcs ilk_crtc_funcs = {
	INTEL_CRTC_FUNCS,

	.get_vblank_counter = g4x_get_vblank_counter,
	.enable_vblank = ilk_enable_vblank,
	.disable_vblank = ilk_disable_vblank,
	.get_vblank_timestamp = intel_crtc_get_vblank_timestamp,
};

static const struct drm_crtc_funcs g4x_crtc_funcs = {
	INTEL_CRTC_FUNCS,

	.get_vblank_counter = g4x_get_vblank_counter,
	.enable_vblank = i965_enable_vblank,
	.disable_vblank = i965_disable_vblank,
	.get_vblank_timestamp = intel_crtc_get_vblank_timestamp,
};

static const struct drm_crtc_funcs i965_crtc_funcs = {
	INTEL_CRTC_FUNCS,

	.get_vblank_counter = i915_get_vblank_counter,
	.enable_vblank = i965_enable_vblank,
	.disable_vblank = i965_disable_vblank,
	.get_vblank_timestamp = intel_crtc_get_vblank_timestamp,
};

static const struct drm_crtc_funcs i915gm_crtc_funcs = {
	INTEL_CRTC_FUNCS,

	.get_vblank_counter = i915_get_vblank_counter,
	.enable_vblank = i915gm_enable_vblank,
	.disable_vblank = i915gm_disable_vblank,
	.get_vblank_timestamp = intel_crtc_get_vblank_timestamp,
};

static const struct drm_crtc_funcs i915_crtc_funcs = {
	INTEL_CRTC_FUNCS,

	.get_vblank_counter = i915_get_vblank_counter,
	.enable_vblank = i8xx_enable_vblank,
	.disable_vblank = i8xx_disable_vblank,
	.get_vblank_timestamp = intel_crtc_get_vblank_timestamp,
};

static const struct drm_crtc_funcs i8xx_crtc_funcs = {
	INTEL_CRTC_FUNCS,

	/* no hw vblank counter */
	.enable_vblank = i8xx_enable_vblank,
	.disable_vblank = i8xx_disable_vblank,
	.get_vblank_timestamp = intel_crtc_get_vblank_timestamp,
};

static struct intel_crtc *intel_crtc_alloc(void)
{
	struct intel_crtc_state *crtc_state;
	struct intel_crtc *crtc;

	crtc = kzalloc(sizeof(*crtc), GFP_KERNEL);
	if (!crtc)
		return ERR_PTR(-ENOMEM);

	crtc_state = intel_crtc_state_alloc(crtc);
	if (!crtc_state) {
		kfree(crtc);
		return ERR_PTR(-ENOMEM);
	}

	crtc->base.state = &crtc_state->uapi;
	crtc->config = crtc_state;

	return crtc;
}

static void intel_crtc_free(struct intel_crtc *crtc)
{
	intel_crtc_destroy_state(&crtc->base, crtc->base.state);
	kfree(crtc);
}

static void intel_plane_possible_crtcs_init(struct drm_i915_private *dev_priv)
{
	struct intel_plane *plane;

	for_each_intel_plane(&dev_priv->drm, plane) {
		struct intel_crtc *crtc = intel_get_crtc_for_pipe(dev_priv,
								  plane->pipe);

		plane->base.possible_crtcs = drm_crtc_mask(&crtc->base);
	}
}

static int intel_crtc_init(struct drm_i915_private *dev_priv, enum pipe pipe)
{
	struct intel_plane *primary, *cursor;
	const struct drm_crtc_funcs *funcs;
	struct intel_crtc *crtc;
	int sprite, ret;

	crtc = intel_crtc_alloc();
	if (IS_ERR(crtc))
		return PTR_ERR(crtc);

	crtc->pipe = pipe;
	crtc->num_scalers = RUNTIME_INFO(dev_priv)->num_scalers[pipe];

	primary = intel_primary_plane_create(dev_priv, pipe);
	if (IS_ERR(primary)) {
		ret = PTR_ERR(primary);
		goto fail;
	}
	crtc->plane_ids_mask |= BIT(primary->id);

	for_each_sprite(dev_priv, pipe, sprite) {
		struct intel_plane *plane;

		plane = intel_sprite_plane_create(dev_priv, pipe, sprite);
		if (IS_ERR(plane)) {
			ret = PTR_ERR(plane);
			goto fail;
		}
		crtc->plane_ids_mask |= BIT(plane->id);
	}

	cursor = intel_cursor_plane_create(dev_priv, pipe);
	if (IS_ERR(cursor)) {
		ret = PTR_ERR(cursor);
		goto fail;
	}
	crtc->plane_ids_mask |= BIT(cursor->id);

	if (HAS_GMCH(dev_priv)) {
		if (IS_CHERRYVIEW(dev_priv) ||
		    IS_VALLEYVIEW(dev_priv) || IS_G4X(dev_priv))
			funcs = &g4x_crtc_funcs;
		else if (IS_GEN(dev_priv, 4))
			funcs = &i965_crtc_funcs;
		else if (IS_I945GM(dev_priv) || IS_I915GM(dev_priv))
			funcs = &i915gm_crtc_funcs;
		else if (IS_GEN(dev_priv, 3))
			funcs = &i915_crtc_funcs;
		else
			funcs = &i8xx_crtc_funcs;
	} else {
		if (INTEL_GEN(dev_priv) >= 8)
			funcs = &bdw_crtc_funcs;
		else
			funcs = &ilk_crtc_funcs;
	}

	ret = drm_crtc_init_with_planes(&dev_priv->drm, &crtc->base,
					&primary->base, &cursor->base,
					funcs, "pipe %c", pipe_name(pipe));
	if (ret)
		goto fail;

	BUG_ON(pipe >= ARRAY_SIZE(dev_priv->pipe_to_crtc_mapping) ||
	       dev_priv->pipe_to_crtc_mapping[pipe] != NULL);
	dev_priv->pipe_to_crtc_mapping[pipe] = crtc;

	if (INTEL_GEN(dev_priv) < 9) {
		enum i9xx_plane_id i9xx_plane = primary->i9xx_plane;

		BUG_ON(i9xx_plane >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) ||
		       dev_priv->plane_to_crtc_mapping[i9xx_plane] != NULL);
		dev_priv->plane_to_crtc_mapping[i9xx_plane] = crtc;
	}

	intel_color_init(crtc);

	intel_crtc_crc_init(crtc);

	drm_WARN_ON(&dev_priv->drm, drm_crtc_index(&crtc->base) != crtc->pipe);

	return 0;

fail:
	intel_crtc_free(crtc);

	return ret;
}

int intel_get_pipe_from_crtc_id_ioctl(struct drm_device *dev, void *data,
				      struct drm_file *file)
{
	struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data;
	struct drm_crtc *drmmode_crtc;
	struct intel_crtc *crtc;

	drmmode_crtc = drm_crtc_find(dev, file, pipe_from_crtc_id->crtc_id);
	if (!drmmode_crtc)
		return -ENOENT;

	crtc = to_intel_crtc(drmmode_crtc);
	pipe_from_crtc_id->pipe = crtc->pipe;

	return 0;
}

static u32 intel_encoder_possible_clones(struct intel_encoder *encoder)
{
	struct drm_device *dev = encoder->base.dev;
	struct intel_encoder *source_encoder;
	u32 possible_clones = 0;

	for_each_intel_encoder(dev, source_encoder) {
		if (encoders_cloneable(encoder, source_encoder))
			possible_clones |= drm_encoder_mask(&source_encoder->base);
	}

	return possible_clones;
}

static u32 intel_encoder_possible_crtcs(struct intel_encoder *encoder)
{
	struct drm_device *dev = encoder->base.dev;
	struct intel_crtc *crtc;
	u32 possible_crtcs = 0;

	for_each_intel_crtc(dev, crtc) {
		if (encoder->pipe_mask & BIT(crtc->pipe))
			possible_crtcs |= drm_crtc_mask(&crtc->base);
	}

	return possible_crtcs;
}

static bool ilk_has_edp_a(struct drm_i915_private *dev_priv)
{
	if (!IS_MOBILE(dev_priv))
		return false;

	if ((intel_de_read(dev_priv, DP_A) & DP_DETECTED) == 0)
		return false;

	if (IS_GEN(dev_priv, 5) && (intel_de_read(dev_priv, FUSE_STRAP) & ILK_eDP_A_DISABLE))
		return false;

	return true;
}

static bool intel_ddi_crt_present(struct drm_i915_private *dev_priv)
{
	if (INTEL_GEN(dev_priv) >= 9)
		return false;

	if (IS_HSW_ULT(dev_priv) || IS_BDW_ULT(dev_priv))
		return false;

	if (HAS_PCH_LPT_H(dev_priv) &&
	    intel_de_read(dev_priv, SFUSE_STRAP) & SFUSE_STRAP_CRT_DISABLED)
		return false;

	/* DDI E can't be used if DDI A requires 4 lanes */
	if (intel_de_read(dev_priv, DDI_BUF_CTL(PORT_A)) & DDI_A_4_LANES)
		return false;

	if (!dev_priv->vbt.int_crt_support)
		return false;

	return true;
}

void intel_pps_unlock_regs_wa(struct drm_i915_private *dev_priv)
{
	int pps_num;
	int pps_idx;

	if (HAS_DDI(dev_priv))
		return;
	/*
	 * This w/a is needed at least on CPT/PPT, but to be sure apply it
	 * everywhere where registers can be write protected.
	 */
	if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
		pps_num = 2;
	else
		pps_num = 1;

	for (pps_idx = 0; pps_idx < pps_num; pps_idx++) {
		u32 val = intel_de_read(dev_priv, PP_CONTROL(pps_idx));

		val = (val & ~PANEL_UNLOCK_MASK) | PANEL_UNLOCK_REGS;
		intel_de_write(dev_priv, PP_CONTROL(pps_idx), val);
	}
}

static void intel_pps_init(struct drm_i915_private *dev_priv)
{
	if (HAS_PCH_SPLIT(dev_priv) || IS_GEN9_LP(dev_priv))
		dev_priv->pps_mmio_base = PCH_PPS_BASE;
	else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
		dev_priv->pps_mmio_base = VLV_PPS_BASE;
	else
		dev_priv->pps_mmio_base = PPS_BASE;

	intel_pps_unlock_regs_wa(dev_priv);
}

static void intel_setup_outputs(struct drm_i915_private *dev_priv)
{
	struct intel_encoder *encoder;
	bool dpd_is_edp = false;

	intel_pps_init(dev_priv);

	if (!HAS_DISPLAY(dev_priv))
		return;

	if (IS_ROCKETLAKE(dev_priv)) {
		intel_ddi_init(dev_priv, PORT_A);
		intel_ddi_init(dev_priv, PORT_B);
		intel_ddi_init(dev_priv, PORT_D);	/* DDI TC1 */
		intel_ddi_init(dev_priv, PORT_E);	/* DDI TC2 */
	} else if (INTEL_GEN(dev_priv) >= 12) {
		intel_ddi_init(dev_priv, PORT_A);
		intel_ddi_init(dev_priv, PORT_B);
		intel_ddi_init(dev_priv, PORT_D);
		intel_ddi_init(dev_priv, PORT_E);
		intel_ddi_init(dev_priv, PORT_F);
		intel_ddi_init(dev_priv, PORT_G);
		intel_ddi_init(dev_priv, PORT_H);
		intel_ddi_init(dev_priv, PORT_I);
		icl_dsi_init(dev_priv);
	} else if (IS_ELKHARTLAKE(dev_priv)) {
		intel_ddi_init(dev_priv, PORT_A);
		intel_ddi_init(dev_priv, PORT_B);
		intel_ddi_init(dev_priv, PORT_C);
		intel_ddi_init(dev_priv, PORT_D);
		icl_dsi_init(dev_priv);
	} else if (IS_GEN(dev_priv, 11)) {
		intel_ddi_init(dev_priv, PORT_A);
		intel_ddi_init(dev_priv, PORT_B);
		intel_ddi_init(dev_priv, PORT_C);
		intel_ddi_init(dev_priv, PORT_D);
		intel_ddi_init(dev_priv, PORT_E);
		/*
		 * On some ICL SKUs port F is not present. No strap bits for
		 * this, so rely on VBT.
		 * Work around broken VBTs on SKUs known to have no port F.
		 */
		if (IS_ICL_WITH_PORT_F(dev_priv) &&
		    intel_bios_is_port_present(dev_priv, PORT_F))
			intel_ddi_init(dev_priv, PORT_F);

		icl_dsi_init(dev_priv);
	} else if (IS_GEN9_LP(dev_priv)) {
		/*
		 * FIXME: Broxton doesn't support port detection via the
		 * DDI_BUF_CTL_A or SFUSE_STRAP registers, find another way to
		 * detect the ports.
		 */
		intel_ddi_init(dev_priv, PORT_A);
		intel_ddi_init(dev_priv, PORT_B);
		intel_ddi_init(dev_priv, PORT_C);

		vlv_dsi_init(dev_priv);
	} else if (HAS_DDI(dev_priv)) {
		int found;

		if (intel_ddi_crt_present(dev_priv))
			intel_crt_init(dev_priv);

		/*
		 * Haswell uses DDI functions to detect digital outputs.
		 * On SKL pre-D0 the strap isn't connected, so we assume
		 * it's there.
		 */
		found = intel_de_read(dev_priv, DDI_BUF_CTL(PORT_A)) & DDI_INIT_DISPLAY_DETECTED;
		/* WaIgnoreDDIAStrap: skl */
		if (found || IS_GEN9_BC(dev_priv))
			intel_ddi_init(dev_priv, PORT_A);

		/* DDI B, C, D, and F detection is indicated by the SFUSE_STRAP
		 * register */
		found = intel_de_read(dev_priv, SFUSE_STRAP);

		if (found & SFUSE_STRAP_DDIB_DETECTED)
			intel_ddi_init(dev_priv, PORT_B);
		if (found & SFUSE_STRAP_DDIC_DETECTED)
			intel_ddi_init(dev_priv, PORT_C);
		if (found & SFUSE_STRAP_DDID_DETECTED)
			intel_ddi_init(dev_priv, PORT_D);
		if (found & SFUSE_STRAP_DDIF_DETECTED)
			intel_ddi_init(dev_priv, PORT_F);
		/*
		 * On SKL we don't have a way to detect DDI-E so we rely on VBT.
		 */
		if (IS_GEN9_BC(dev_priv) &&
		    intel_bios_is_port_present(dev_priv, PORT_E))
			intel_ddi_init(dev_priv, PORT_E);

	} else if (HAS_PCH_SPLIT(dev_priv)) {
		int found;

		/*
		 * intel_edp_init_connector() depends on this completing first,
		 * to prevent the registration of both eDP and LVDS and the
		 * incorrect sharing of the PPS.
		 */
		intel_lvds_init(dev_priv);
		intel_crt_init(dev_priv);

		dpd_is_edp = intel_dp_is_port_edp(dev_priv, PORT_D);

		if (ilk_has_edp_a(dev_priv))
			intel_dp_init(dev_priv, DP_A, PORT_A);

		if (intel_de_read(dev_priv, PCH_HDMIB) & SDVO_DETECTED) {
			/* PCH SDVOB multiplex with HDMIB */
			found = intel_sdvo_init(dev_priv, PCH_SDVOB, PORT_B);
			if (!found)
				intel_hdmi_init(dev_priv, PCH_HDMIB, PORT_B);
			if (!found && (intel_de_read(dev_priv, PCH_DP_B) & DP_DETECTED))
				intel_dp_init(dev_priv, PCH_DP_B, PORT_B);
		}

		if (intel_de_read(dev_priv, PCH_HDMIC) & SDVO_DETECTED)
			intel_hdmi_init(dev_priv, PCH_HDMIC, PORT_C);

		if (!dpd_is_edp && intel_de_read(dev_priv, PCH_HDMID) & SDVO_DETECTED)
			intel_hdmi_init(dev_priv, PCH_HDMID, PORT_D);

		if (intel_de_read(dev_priv, PCH_DP_C) & DP_DETECTED)
			intel_dp_init(dev_priv, PCH_DP_C, PORT_C);

		if (intel_de_read(dev_priv, PCH_DP_D) & DP_DETECTED)
			intel_dp_init(dev_priv, PCH_DP_D, PORT_D);
	} else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
		bool has_edp, has_port;

		if (IS_VALLEYVIEW(dev_priv) && dev_priv->vbt.int_crt_support)
			intel_crt_init(dev_priv);

		/*
		 * The DP_DETECTED bit is the latched state of the DDC
		 * SDA pin at boot. However since eDP doesn't require DDC
		 * (no way to plug in a DP->HDMI dongle) the DDC pins for
		 * eDP ports may have been muxed to an alternate function.
		 * Thus we can't rely on the DP_DETECTED bit alone to detect
		 * eDP ports. Consult the VBT as well as DP_DETECTED to
		 * detect eDP ports.
		 *
		 * Sadly the straps seem to be missing sometimes even for HDMI
		 * ports (eg. on Voyo V3 - CHT x7-Z8700), so check both strap
		 * and VBT for the presence of the port. Additionally we can't
		 * trust the port type the VBT declares as we've seen at least
		 * HDMI ports that the VBT claim are DP or eDP.
		 */
		has_edp = intel_dp_is_port_edp(dev_priv, PORT_B);
		has_port = intel_bios_is_port_present(dev_priv, PORT_B);
		if (intel_de_read(dev_priv, VLV_DP_B) & DP_DETECTED || has_port)
			has_edp &= intel_dp_init(dev_priv, VLV_DP_B, PORT_B);
		if ((intel_de_read(dev_priv, VLV_HDMIB) & SDVO_DETECTED || has_port) && !has_edp)
			intel_hdmi_init(dev_priv, VLV_HDMIB, PORT_B);

		has_edp = intel_dp_is_port_edp(dev_priv, PORT_C);
		has_port = intel_bios_is_port_present(dev_priv, PORT_C);
		if (intel_de_read(dev_priv, VLV_DP_C) & DP_DETECTED || has_port)
			has_edp &= intel_dp_init(dev_priv, VLV_DP_C, PORT_C);
		if ((intel_de_read(dev_priv, VLV_HDMIC) & SDVO_DETECTED || has_port) && !has_edp)
			intel_hdmi_init(dev_priv, VLV_HDMIC, PORT_C);

		if (IS_CHERRYVIEW(dev_priv)) {
			/*
			 * eDP not supported on port D,
			 * so no need to worry about it
			 */
			has_port = intel_bios_is_port_present(dev_priv, PORT_D);
			if (intel_de_read(dev_priv, CHV_DP_D) & DP_DETECTED || has_port)
				intel_dp_init(dev_priv, CHV_DP_D, PORT_D);
			if (intel_de_read(dev_priv, CHV_HDMID) & SDVO_DETECTED || has_port)
				intel_hdmi_init(dev_priv, CHV_HDMID, PORT_D);
		}

		vlv_dsi_init(dev_priv);
	} else if (IS_PINEVIEW(dev_priv)) {
		intel_lvds_init(dev_priv);
		intel_crt_init(dev_priv);
	} else if (IS_GEN_RANGE(dev_priv, 3, 4)) {
		bool found = false;

		if (IS_MOBILE(dev_priv))
			intel_lvds_init(dev_priv);

		intel_crt_init(dev_priv);

		if (intel_de_read(dev_priv, GEN3_SDVOB) & SDVO_DETECTED) {
			drm_dbg_kms(&dev_priv->drm, "probing SDVOB\n");
			found = intel_sdvo_init(dev_priv, GEN3_SDVOB, PORT_B);
			if (!found && IS_G4X(dev_priv)) {
				drm_dbg_kms(&dev_priv->drm,
					    "probing HDMI on SDVOB\n");
				intel_hdmi_init(dev_priv, GEN4_HDMIB, PORT_B);
			}

			if (!found && IS_G4X(dev_priv))
				intel_dp_init(dev_priv, DP_B, PORT_B);
		}

		/* Before G4X SDVOC doesn't have its own detect register */

		if (intel_de_read(dev_priv, GEN3_SDVOB) & SDVO_DETECTED) {
			drm_dbg_kms(&dev_priv->drm, "probing SDVOC\n");
			found = intel_sdvo_init(dev_priv, GEN3_SDVOC, PORT_C);
		}

		if (!found && (intel_de_read(dev_priv, GEN3_SDVOC) & SDVO_DETECTED)) {

			if (IS_G4X(dev_priv)) {
				drm_dbg_kms(&dev_priv->drm,
					    "probing HDMI on SDVOC\n");
				intel_hdmi_init(dev_priv, GEN4_HDMIC, PORT_C);
			}
			if (IS_G4X(dev_priv))
				intel_dp_init(dev_priv, DP_C, PORT_C);
		}

		if (IS_G4X(dev_priv) && (intel_de_read(dev_priv, DP_D) & DP_DETECTED))
			intel_dp_init(dev_priv, DP_D, PORT_D);

		if (SUPPORTS_TV(dev_priv))
			intel_tv_init(dev_priv);
	} else if (IS_GEN(dev_priv, 2)) {
		if (IS_I85X(dev_priv))
			intel_lvds_init(dev_priv);

		intel_crt_init(dev_priv);
		intel_dvo_init(dev_priv);
	}

	intel_psr_init(dev_priv);

	for_each_intel_encoder(&dev_priv->drm, encoder) {
		encoder->base.possible_crtcs =
			intel_encoder_possible_crtcs(encoder);
		encoder->base.possible_clones =
			intel_encoder_possible_clones(encoder);
	}

	intel_init_pch_refclk(dev_priv);

	drm_helper_move_panel_connectors_to_head(&dev_priv->drm);
}

static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb)
{
	struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);

	drm_framebuffer_cleanup(fb);
	intel_frontbuffer_put(intel_fb->frontbuffer);

	kfree(intel_fb);
}

static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb,
						struct drm_file *file,
						unsigned int *handle)
{
	struct drm_i915_gem_object *obj = intel_fb_obj(fb);
	struct drm_i915_private *i915 = to_i915(obj->base.dev);

	if (obj->userptr.mm) {
		drm_dbg(&i915->drm,
			"attempting to use a userptr for a framebuffer, denied\n");
		return -EINVAL;
	}

	return drm_gem_handle_create(file, &obj->base, handle);
}

static int intel_user_framebuffer_dirty(struct drm_framebuffer *fb,
					struct drm_file *file,
					unsigned flags, unsigned color,
					struct drm_clip_rect *clips,
					unsigned num_clips)
{
	struct drm_i915_gem_object *obj = intel_fb_obj(fb);

	i915_gem_object_flush_if_display(obj);
	intel_frontbuffer_flush(to_intel_frontbuffer(fb), ORIGIN_DIRTYFB);

	return 0;
}

static const struct drm_framebuffer_funcs intel_fb_funcs = {
	.destroy = intel_user_framebuffer_destroy,
	.create_handle = intel_user_framebuffer_create_handle,
	.dirty = intel_user_framebuffer_dirty,
};

static int intel_framebuffer_init(struct intel_framebuffer *intel_fb,
				  struct drm_i915_gem_object *obj,
				  struct drm_mode_fb_cmd2 *mode_cmd)
{
	struct drm_i915_private *dev_priv = to_i915(obj->base.dev);
	struct drm_framebuffer *fb = &intel_fb->base;
	u32 max_stride;
	unsigned int tiling, stride;
	int ret = -EINVAL;
	int i;

	intel_fb->frontbuffer = intel_frontbuffer_get(obj);
	if (!intel_fb->frontbuffer)
		return -ENOMEM;

	i915_gem_object_lock(obj, NULL);
	tiling = i915_gem_object_get_tiling(obj);
	stride = i915_gem_object_get_stride(obj);
	i915_gem_object_unlock(obj);

	if (mode_cmd->flags & DRM_MODE_FB_MODIFIERS) {
		/*
		 * If there's a fence, enforce that
		 * the fb modifier and tiling mode match.
		 */
		if (tiling != I915_TILING_NONE &&
		    tiling != intel_fb_modifier_to_tiling(mode_cmd->modifier[0])) {
			drm_dbg_kms(&dev_priv->drm,
				    "tiling_mode doesn't match fb modifier\n");
			goto err;
		}
	} else {
		if (tiling == I915_TILING_X) {
			mode_cmd->modifier[0] = I915_FORMAT_MOD_X_TILED;
		} else if (tiling == I915_TILING_Y) {
			drm_dbg_kms(&dev_priv->drm,
				    "No Y tiling for legacy addfb\n");
			goto err;
		}
	}

	if (!drm_any_plane_has_format(&dev_priv->drm,
				      mode_cmd->pixel_format,
				      mode_cmd->modifier[0])) {
		struct drm_format_name_buf format_name;

		drm_dbg_kms(&dev_priv->drm,
			    "unsupported pixel format %s / modifier 0x%llx\n",
			    drm_get_format_name(mode_cmd->pixel_format,
						&format_name),
			    mode_cmd->modifier[0]);
		goto err;
	}

	/*
	 * gen2/3 display engine uses the fence if present,
	 * so the tiling mode must match the fb modifier exactly.
	 */
	if (INTEL_GEN(dev_priv) < 4 &&
	    tiling != intel_fb_modifier_to_tiling(mode_cmd->modifier[0])) {
		drm_dbg_kms(&dev_priv->drm,
			    "tiling_mode must match fb modifier exactly on gen2/3\n");
		goto err;
	}

	max_stride = intel_fb_max_stride(dev_priv, mode_cmd->pixel_format,
					 mode_cmd->modifier[0]);
	if (mode_cmd->pitches[0] > max_stride) {
		drm_dbg_kms(&dev_priv->drm,
			    "%s pitch (%u) must be at most %d\n",
			    mode_cmd->modifier[0] != DRM_FORMAT_MOD_LINEAR ?
			    "tiled" : "linear",
			    mode_cmd->pitches[0], max_stride);
		goto err;
	}

	/*
	 * If there's a fence, enforce that
	 * the fb pitch and fence stride match.
	 */
	if (tiling != I915_TILING_NONE && mode_cmd->pitches[0] != stride) {
		drm_dbg_kms(&dev_priv->drm,
			    "pitch (%d) must match tiling stride (%d)\n",
			    mode_cmd->pitches[0], stride);
		goto err;
	}

	/* FIXME need to adjust LINOFF/TILEOFF accordingly. */
	if (mode_cmd->offsets[0] != 0) {
		drm_dbg_kms(&dev_priv->drm,
			    "plane 0 offset (0x%08x) must be 0\n",
			    mode_cmd->offsets[0]);
		goto err;
	}

	drm_helper_mode_fill_fb_struct(&dev_priv->drm, fb, mode_cmd);

	for (i = 0; i < fb->format->num_planes; i++) {
		u32 stride_alignment;

		if (mode_cmd->handles[i] != mode_cmd->handles[0]) {
			drm_dbg_kms(&dev_priv->drm, "bad plane %d handle\n",
				    i);
			goto err;
		}

		stride_alignment = intel_fb_stride_alignment(fb, i);
		if (fb->pitches[i] & (stride_alignment - 1)) {
			drm_dbg_kms(&dev_priv->drm,
				    "plane %d pitch (%d) must be at least %u byte aligned\n",
				    i, fb->pitches[i], stride_alignment);
			goto err;
		}

		if (is_gen12_ccs_plane(fb, i)) {
			int ccs_aux_stride = gen12_ccs_aux_stride(fb, i);

			if (fb->pitches[i] != ccs_aux_stride) {
				drm_dbg_kms(&dev_priv->drm,
					    "ccs aux plane %d pitch (%d) must be %d\n",
					    i,
					    fb->pitches[i], ccs_aux_stride);
				goto err;
			}
		}

		fb->obj[i] = &obj->base;
	}

	ret = intel_fill_fb_info(dev_priv, fb);
	if (ret)
		goto err;

	ret = drm_framebuffer_init(&dev_priv->drm, fb, &intel_fb_funcs);
	if (ret) {
		drm_err(&dev_priv->drm, "framebuffer init failed %d\n", ret);
		goto err;
	}

	return 0;

err:
	intel_frontbuffer_put(intel_fb->frontbuffer);
	return ret;
}

static struct drm_framebuffer *
intel_user_framebuffer_create(struct drm_device *dev,
			      struct drm_file *filp,
			      const struct drm_mode_fb_cmd2 *user_mode_cmd)
{
	struct drm_framebuffer *fb;
	struct drm_i915_gem_object *obj;
	struct drm_mode_fb_cmd2 mode_cmd = *user_mode_cmd;

	obj = i915_gem_object_lookup(filp, mode_cmd.handles[0]);
	if (!obj)
		return ERR_PTR(-ENOENT);

	fb = intel_framebuffer_create(obj, &mode_cmd);
	i915_gem_object_put(obj);

	return fb;
}

static enum drm_mode_status
intel_mode_valid(struct drm_device *dev,
		 const struct drm_display_mode *mode)
{
	struct drm_i915_private *dev_priv = to_i915(dev);
	int hdisplay_max, htotal_max;
	int vdisplay_max, vtotal_max;

	/*
	 * Can't reject DBLSCAN here because Xorg ddxen can add piles
	 * of DBLSCAN modes to the output's mode list when they detect
	 * the scaling mode property on the connector. And they don't
	 * ask the kernel to validate those modes in any way until
	 * modeset time at which point the client gets a protocol error.
	 * So in order to not upset those clients we silently ignore the
	 * DBLSCAN flag on such connectors. For other connectors we will
	 * reject modes with the DBLSCAN flag in encoder->compute_config().
	 * And we always reject DBLSCAN modes in connector->mode_valid()
	 * as we never want such modes on the connector's mode list.
	 */

	if (mode->vscan > 1)
		return MODE_NO_VSCAN;

	if (mode->flags & DRM_MODE_FLAG_HSKEW)
		return MODE_H_ILLEGAL;

	if (mode->flags & (DRM_MODE_FLAG_CSYNC |
			   DRM_MODE_FLAG_NCSYNC |
			   DRM_MODE_FLAG_PCSYNC))
		return MODE_HSYNC;

	if (mode->flags & (DRM_MODE_FLAG_BCAST |
			   DRM_MODE_FLAG_PIXMUX |
			   DRM_MODE_FLAG_CLKDIV2))
		return MODE_BAD;

	/* Transcoder timing limits */
	if (INTEL_GEN(dev_priv) >= 11) {
		hdisplay_max = 16384;
		vdisplay_max = 8192;
		htotal_max = 16384;
		vtotal_max = 8192;
	} else if (INTEL_GEN(dev_priv) >= 9 ||
		   IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) {
		hdisplay_max = 8192; /* FDI max 4096 handled elsewhere */
		vdisplay_max = 4096;
		htotal_max = 8192;
		vtotal_max = 8192;
	} else if (INTEL_GEN(dev_priv) >= 3) {
		hdisplay_max = 4096;
		vdisplay_max = 4096;
		htotal_max = 8192;
		vtotal_max = 8192;
	} else {
		hdisplay_max = 2048;
		vdisplay_max = 2048;
		htotal_max = 4096;
		vtotal_max = 4096;
	}

	if (mode->hdisplay > hdisplay_max ||
	    mode->hsync_start > htotal_max ||
	    mode->hsync_end > htotal_max ||
	    mode->htotal > htotal_max)
		return MODE_H_ILLEGAL;

	if (mode->vdisplay > vdisplay_max ||
	    mode->vsync_start > vtotal_max ||
	    mode->vsync_end > vtotal_max ||
	    mode->vtotal > vtotal_max)
		return MODE_V_ILLEGAL;

	if (INTEL_GEN(dev_priv) >= 5) {
		if (mode->hdisplay < 64 ||
		    mode->htotal - mode->hdisplay < 32)
			return MODE_H_ILLEGAL;

		if (mode->vtotal - mode->vdisplay < 5)
			return MODE_V_ILLEGAL;
	} else {
		if (mode->htotal - mode->hdisplay < 32)
			return MODE_H_ILLEGAL;

		if (mode->vtotal - mode->vdisplay < 3)
			return MODE_V_ILLEGAL;
	}

	return MODE_OK;
}

enum drm_mode_status
intel_mode_valid_max_plane_size(struct drm_i915_private *dev_priv,
				const struct drm_display_mode *mode)
{
	int plane_width_max, plane_height_max;

	/*
	 * intel_mode_valid() should be
	 * sufficient on older platforms.
	 */
	if (INTEL_GEN(dev_priv) < 9)
		return MODE_OK;

	/*
	 * Most people will probably want a fullscreen
	 * plane so let's not advertize modes that are
	 * too big for that.
	 */
	if (INTEL_GEN(dev_priv) >= 11) {
		plane_width_max = 5120;
		plane_height_max = 4320;
	} else {
		plane_width_max = 5120;
		plane_height_max = 4096;
	}

	if (mode->hdisplay > plane_width_max)
		return MODE_H_ILLEGAL;

	if (mode->vdisplay > plane_height_max)
		return MODE_V_ILLEGAL;

	return MODE_OK;
}

static const struct drm_mode_config_funcs intel_mode_funcs = {
	.fb_create = intel_user_framebuffer_create,
	.get_format_info = intel_get_format_info,
	.output_poll_changed = intel_fbdev_output_poll_changed,
	.mode_valid = intel_mode_valid,
	.atomic_check = intel_atomic_check,
	.atomic_commit = intel_atomic_commit,
	.atomic_state_alloc = intel_atomic_state_alloc,
	.atomic_state_clear = intel_atomic_state_clear,
	.atomic_state_free = intel_atomic_state_free,
};

/**
 * intel_init_display_hooks - initialize the display modesetting hooks
 * @dev_priv: device private
 */
void intel_init_display_hooks(struct drm_i915_private *dev_priv)
{
	intel_init_cdclk_hooks(dev_priv);

	if (INTEL_GEN(dev_priv) >= 9) {
		dev_priv->display.get_pipe_config = hsw_get_pipe_config;
		dev_priv->display.get_initial_plane_config =
			skl_get_initial_plane_config;
		dev_priv->display.crtc_compute_clock = hsw_crtc_compute_clock;
		dev_priv->display.crtc_enable = hsw_crtc_enable;
		dev_priv->display.crtc_disable = hsw_crtc_disable;
	} else if (HAS_DDI(dev_priv)) {
		dev_priv->display.get_pipe_config = hsw_get_pipe_config;
		dev_priv->display.get_initial_plane_config =
			i9xx_get_initial_plane_config;
		dev_priv->display.crtc_compute_clock =
			hsw_crtc_compute_clock;
		dev_priv->display.crtc_enable = hsw_crtc_enable;
		dev_priv->display.crtc_disable = hsw_crtc_disable;
	} else if (HAS_PCH_SPLIT(dev_priv)) {
		dev_priv->display.get_pipe_config = ilk_get_pipe_config;
		dev_priv->display.get_initial_plane_config =
			i9xx_get_initial_plane_config;
		dev_priv->display.crtc_compute_clock =
			ilk_crtc_compute_clock;
		dev_priv->display.crtc_enable = ilk_crtc_enable;
		dev_priv->display.crtc_disable = ilk_crtc_disable;
	} else if (IS_CHERRYVIEW(dev_priv)) {
		dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
		dev_priv->display.get_initial_plane_config =
			i9xx_get_initial_plane_config;
		dev_priv->display.crtc_compute_clock = chv_crtc_compute_clock;
		dev_priv->display.crtc_enable = valleyview_crtc_enable;
		dev_priv->display.crtc_disable = i9xx_crtc_disable;
	} else if (IS_VALLEYVIEW(dev_priv)) {
		dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
		dev_priv->display.get_initial_plane_config =
			i9xx_get_initial_plane_config;
		dev_priv->display.crtc_compute_clock = vlv_crtc_compute_clock;
		dev_priv->display.crtc_enable = valleyview_crtc_enable;
		dev_priv->display.crtc_disable = i9xx_crtc_disable;
	} else if (IS_G4X(dev_priv)) {
		dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
		dev_priv->display.get_initial_plane_config =
			i9xx_get_initial_plane_config;
		dev_priv->display.crtc_compute_clock = g4x_crtc_compute_clock;
		dev_priv->display.crtc_enable = i9xx_crtc_enable;
		dev_priv->display.crtc_disable = i9xx_crtc_disable;
	} else if (IS_PINEVIEW(dev_priv)) {
		dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
		dev_priv->display.get_initial_plane_config =
			i9xx_get_initial_plane_config;
		dev_priv->display.crtc_compute_clock = pnv_crtc_compute_clock;
		dev_priv->display.crtc_enable = i9xx_crtc_enable;
		dev_priv->display.crtc_disable = i9xx_crtc_disable;
	} else if (!IS_GEN(dev_priv, 2)) {
		dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
		dev_priv->display.get_initial_plane_config =
			i9xx_get_initial_plane_config;
		dev_priv->display.crtc_compute_clock = i9xx_crtc_compute_clock;
		dev_priv->display.crtc_enable = i9xx_crtc_enable;
		dev_priv->display.crtc_disable = i9xx_crtc_disable;
	} else {
		dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
		dev_priv->display.get_initial_plane_config =
			i9xx_get_initial_plane_config;
		dev_priv->display.crtc_compute_clock = i8xx_crtc_compute_clock;
		dev_priv->display.crtc_enable = i9xx_crtc_enable;
		dev_priv->display.crtc_disable = i9xx_crtc_disable;
	}

	if (IS_GEN(dev_priv, 5)) {
		dev_priv->display.fdi_link_train = ilk_fdi_link_train;
	} else if (IS_GEN(dev_priv, 6)) {
		dev_priv->display.fdi_link_train = gen6_fdi_link_train;
	} else if (IS_IVYBRIDGE(dev_priv)) {
		/* FIXME: detect B0+ stepping and use auto training */
		dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
	}

	if (INTEL_GEN(dev_priv) >= 9)
		dev_priv->display.commit_modeset_enables = skl_commit_modeset_enables;
	else
		dev_priv->display.commit_modeset_enables = intel_commit_modeset_enables;

}

void intel_modeset_init_hw(struct drm_i915_private *i915)
{
	struct intel_cdclk_state *cdclk_state =
		to_intel_cdclk_state(i915->cdclk.obj.state);
	struct intel_dbuf_state *dbuf_state =
		to_intel_dbuf_state(i915->dbuf.obj.state);

	intel_update_cdclk(i915);
	intel_dump_cdclk_config(&i915->cdclk.hw, "Current CDCLK");
	cdclk_state->logical = cdclk_state->actual = i915->cdclk.hw;

	dbuf_state->enabled_slices = i915->dbuf.enabled_slices;
}

static int sanitize_watermarks_add_affected(struct drm_atomic_state *state)
{
	struct drm_plane *plane;
	struct intel_crtc *crtc;

	for_each_intel_crtc(state->dev, crtc) {
		struct intel_crtc_state *crtc_state;

		crtc_state = intel_atomic_get_crtc_state(state, crtc);
		if (IS_ERR(crtc_state))
			return PTR_ERR(crtc_state);

		if (crtc_state->hw.active) {
			/*
			 * Preserve the inherited flag to avoid
			 * taking the full modeset path.
			 */
			crtc_state->inherited = true;
		}
	}

	drm_for_each_plane(plane, state->dev) {
		struct drm_plane_state *plane_state;

		plane_state = drm_atomic_get_plane_state(state, plane);
		if (IS_ERR(plane_state))
			return PTR_ERR(plane_state);
	}

	return 0;
}

/*
 * Calculate what we think the watermarks should be for the state we've read
 * out of the hardware and then immediately program those watermarks so that
 * we ensure the hardware settings match our internal state.
 *
 * We can calculate what we think WM's should be by creating a duplicate of the
 * current state (which was constructed during hardware readout) and running it
 * through the atomic check code to calculate new watermark values in the
 * state object.
 */
static void sanitize_watermarks(struct drm_i915_private *dev_priv)
{
	struct drm_atomic_state *state;
	struct intel_atomic_state *intel_state;
	struct intel_crtc *crtc;
	struct intel_crtc_state *crtc_state;
	struct drm_modeset_acquire_ctx ctx;
	int ret;
	int i;

	/* Only supported on platforms that use atomic watermark design */
	if (!dev_priv->display.optimize_watermarks)
		return;

	state = drm_atomic_state_alloc(&dev_priv->drm);
	if (drm_WARN_ON(&dev_priv->drm, !state))
		return;

	intel_state = to_intel_atomic_state(state);

	drm_modeset_acquire_init(&ctx, 0);

retry:
	state->acquire_ctx = &ctx;

	/*
	 * Hardware readout is the only time we don't want to calculate
	 * intermediate watermarks (since we don't trust the current
	 * watermarks).
	 */
	if (!HAS_GMCH(dev_priv))
		intel_state->skip_intermediate_wm = true;

	ret = sanitize_watermarks_add_affected(state);
	if (ret)
		goto fail;

	ret = intel_atomic_check(&dev_priv->drm, state);
	if (ret)
		goto fail;

	/* Write calculated watermark values back */
	for_each_new_intel_crtc_in_state(intel_state, crtc, crtc_state, i) {
		crtc_state->wm.need_postvbl_update = true;
		dev_priv->display.optimize_watermarks(intel_state, crtc);

		to_intel_crtc_state(crtc->base.state)->wm = crtc_state->wm;
	}

fail:
	if (ret == -EDEADLK) {
		drm_atomic_state_clear(state);
		drm_modeset_backoff(&ctx);
		goto retry;
	}

	/*
	 * If we fail here, it means that the hardware appears to be
	 * programmed in a way that shouldn't be possible, given our
	 * understanding of watermark requirements.  This might mean a
	 * mistake in the hardware readout code or a mistake in the
	 * watermark calculations for a given platform.  Raise a WARN
	 * so that this is noticeable.
	 *
	 * If this actually happens, we'll have to just leave the
	 * BIOS-programmed watermarks untouched and hope for the best.
	 */
	drm_WARN(&dev_priv->drm, ret,
		 "Could not determine valid watermarks for inherited state\n");

	drm_atomic_state_put(state);

	drm_modeset_drop_locks(&ctx);
	drm_modeset_acquire_fini(&ctx);
}

static void intel_update_fdi_pll_freq(struct drm_i915_private *dev_priv)
{
	if (IS_GEN(dev_priv, 5)) {
		u32 fdi_pll_clk =
			intel_de_read(dev_priv, FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK;

		dev_priv->fdi_pll_freq = (fdi_pll_clk + 2) * 10000;
	} else if (IS_GEN(dev_priv, 6) || IS_IVYBRIDGE(dev_priv)) {
		dev_priv->fdi_pll_freq = 270000;
	} else {
		return;
	}

	drm_dbg(&dev_priv->drm, "FDI PLL freq=%d\n", dev_priv->fdi_pll_freq);
}

static int intel_initial_commit(struct drm_device *dev)
{
	struct drm_atomic_state *state = NULL;
	struct drm_modeset_acquire_ctx ctx;
	struct intel_crtc *crtc;
	int ret = 0;

	state = drm_atomic_state_alloc(dev);
	if (!state)
		return -ENOMEM;

	drm_modeset_acquire_init(&ctx, 0);

retry:
	state->acquire_ctx = &ctx;

	for_each_intel_crtc(dev, crtc) {
		struct intel_crtc_state *crtc_state =
			intel_atomic_get_crtc_state(state, crtc);

		if (IS_ERR(crtc_state)) {
			ret = PTR_ERR(crtc_state);
			goto out;
		}

		if (crtc_state->hw.active) {
			/*
			 * We've not yet detected sink capabilities
			 * (audio,infoframes,etc.) and thus we don't want to
			 * force a full state recomputation yet. We want that to
			 * happen only for the first real commit from userspace.
			 * So preserve the inherited flag for the time being.
			 */
			crtc_state->inherited = true;

			ret = drm_atomic_add_affected_planes(state, &crtc->base);
			if (ret)
				goto out;

			/*
			 * FIXME hack to force a LUT update to avoid the
			 * plane update forcing the pipe gamma on without
			 * having a proper LUT loaded. Remove once we
			 * have readout for pipe gamma enable.
			 */
			crtc_state->uapi.color_mgmt_changed = true;

			/*
			 * FIXME hack to force full modeset when DSC is being
			 * used.
			 *
			 * As long as we do not have full state readout and
			 * config comparison of crtc_state->dsc, we have no way
			 * to ensure reliable fastset. Remove once we have
			 * readout for DSC.
			 */
			if (crtc_state->dsc.compression_enable) {
				ret = drm_atomic_add_affected_connectors(state,
									 &crtc->base);
				if (ret)
					goto out;
				crtc_state->uapi.mode_changed = true;
				drm_dbg_kms(dev, "Force full modeset for DSC\n");
			}
		}
	}

	ret = drm_atomic_commit(state);

out:
	if (ret == -EDEADLK) {
		drm_atomic_state_clear(state);
		drm_modeset_backoff(&ctx);
		goto retry;
	}

	drm_atomic_state_put(state);

	drm_modeset_drop_locks(&ctx);
	drm_modeset_acquire_fini(&ctx);

	return ret;
}

static void intel_mode_config_init(struct drm_i915_private *i915)
{
	struct drm_mode_config *mode_config = &i915->drm.mode_config;

	drm_mode_config_init(&i915->drm);
	INIT_LIST_HEAD(&i915->global_obj_list);

	mode_config->min_width = 0;
	mode_config->min_height = 0;

	mode_config->preferred_depth = 24;
	mode_config->prefer_shadow = 1;

	mode_config->allow_fb_modifiers = true;

	mode_config->funcs = &intel_mode_funcs;

	/*
	 * Maximum framebuffer dimensions, chosen to match
	 * the maximum render engine surface size on gen4+.
	 */
	if (INTEL_GEN(i915) >= 7) {
		mode_config->max_width = 16384;
		mode_config->max_height = 16384;
	} else if (INTEL_GEN(i915) >= 4) {
		mode_config->max_width = 8192;
		mode_config->max_height = 8192;
	} else if (IS_GEN(i915, 3)) {
		mode_config->max_width = 4096;
		mode_config->max_height = 4096;
	} else {
		mode_config->max_width = 2048;
		mode_config->max_height = 2048;
	}

	if (IS_I845G(i915) || IS_I865G(i915)) {
		mode_config->cursor_width = IS_I845G(i915) ? 64 : 512;
		mode_config->cursor_height = 1023;
	} else if (IS_I830(i915) || IS_I85X(i915) ||
		   IS_I915G(i915) || IS_I915GM(i915)) {
		mode_config->cursor_width = 64;
		mode_config->cursor_height = 64;
	} else {
		mode_config->cursor_width = 256;
		mode_config->cursor_height = 256;
	}
}

static void intel_mode_config_cleanup(struct drm_i915_private *i915)
{
	intel_atomic_global_obj_cleanup(i915);
	drm_mode_config_cleanup(&i915->drm);
}

static void plane_config_fini(struct intel_initial_plane_config *plane_config)
{
	if (plane_config->fb) {
		struct drm_framebuffer *fb = &plane_config->fb->base;

		/* We may only have the stub and not a full framebuffer */
		if (drm_framebuffer_read_refcount(fb))
			drm_framebuffer_put(fb);
		else
			kfree(fb);
	}

	if (plane_config->vma)
		i915_vma_put(plane_config->vma);
}

/* part #1: call before irq install */
int intel_modeset_init_noirq(struct drm_i915_private *i915)
{
	int ret;

	if (i915_inject_probe_failure(i915))
		return -ENODEV;

	if (HAS_DISPLAY(i915)) {
		ret = drm_vblank_init(&i915->drm,
				      INTEL_NUM_PIPES(i915));
		if (ret)
			return ret;
	}

	intel_bios_init(i915);

	ret = intel_vga_register(i915);
	if (ret)
		goto cleanup_bios;

	/* FIXME: completely on the wrong abstraction layer */
	intel_power_domains_init_hw(i915, false);

	intel_csr_ucode_init(i915);

	i915->modeset_wq = alloc_ordered_workqueue("i915_modeset", 0);
	i915->flip_wq = alloc_workqueue("i915_flip", WQ_HIGHPRI |
					WQ_UNBOUND, WQ_UNBOUND_MAX_ACTIVE);

	intel_mode_config_init(i915);

	ret = intel_cdclk_init(i915);
	if (ret)
		goto cleanup_vga_client_pw_domain_csr;

	ret = intel_dbuf_init(i915);
	if (ret)
		goto cleanup_vga_client_pw_domain_csr;

	ret = intel_bw_init(i915);
	if (ret)
		goto cleanup_vga_client_pw_domain_csr;

	init_llist_head(&i915->atomic_helper.free_list);
	INIT_WORK(&i915->atomic_helper.free_work,
		  intel_atomic_helper_free_state_worker);

	intel_init_quirks(i915);

	intel_fbc_init(i915);

	return 0;

cleanup_vga_client_pw_domain_csr:
	intel_csr_ucode_fini(i915);
	intel_power_domains_driver_remove(i915);
	intel_vga_unregister(i915);
cleanup_bios:
	intel_bios_driver_remove(i915);

	return ret;
}

/* part #2: call after irq install, but before gem init */
int intel_modeset_init_nogem(struct drm_i915_private *i915)
{
	struct drm_device *dev = &i915->drm;
	enum pipe pipe;
	struct intel_crtc *crtc;
	int ret;

	intel_init_pm(i915);

	intel_panel_sanitize_ssc(i915);

	intel_gmbus_setup(i915);

	drm_dbg_kms(&i915->drm, "%d display pipe%s available.\n",
		    INTEL_NUM_PIPES(i915),
		    INTEL_NUM_PIPES(i915) > 1 ? "s" : "");

	if (HAS_DISPLAY(i915)) {
		for_each_pipe(i915, pipe) {
			ret = intel_crtc_init(i915, pipe);
			if (ret) {
				intel_mode_config_cleanup(i915);
				return ret;
			}
		}
	}

	intel_plane_possible_crtcs_init(i915);
	intel_shared_dpll_init(dev);
	intel_update_fdi_pll_freq(i915);

	intel_update_czclk(i915);
	intel_modeset_init_hw(i915);

	intel_hdcp_component_init(i915);

	if (i915->max_cdclk_freq == 0)
		intel_update_max_cdclk(i915);

	/*
	 * If the platform has HTI, we need to find out whether it has reserved
	 * any display resources before we create our display outputs.
	 */
	if (INTEL_INFO(i915)->display.has_hti)
		i915->hti_state = intel_de_read(i915, HDPORT_STATE);

	/* Just disable it once at startup */
	intel_vga_disable(i915);
	intel_setup_outputs(i915);

	drm_modeset_lock_all(dev);
	intel_modeset_setup_hw_state(dev, dev->mode_config.acquire_ctx);
	drm_modeset_unlock_all(dev);

	for_each_intel_crtc(dev, crtc) {
		struct intel_initial_plane_config plane_config = {};

		if (!crtc->active)
			continue;

		/*
		 * Note that reserving the BIOS fb up front prevents us
		 * from stuffing other stolen allocations like the ring
		 * on top.  This prevents some ugliness at boot time, and
		 * can even allow for smooth boot transitions if the BIOS
		 * fb is large enough for the active pipe configuration.
		 */
		i915->display.get_initial_plane_config(crtc, &plane_config);

		/*
		 * If the fb is shared between multiple heads, we'll
		 * just get the first one.
		 */
		intel_find_initial_plane_obj(crtc, &plane_config);

		plane_config_fini(&plane_config);
	}

	/*
	 * Make sure hardware watermarks really match the state we read out.
	 * Note that we need to do this after reconstructing the BIOS fb's
	 * since the watermark calculation done here will use pstate->fb.
	 */
	if (!HAS_GMCH(i915))
		sanitize_watermarks(i915);

	/*
	 * Force all active planes to recompute their states. So that on
	 * mode_setcrtc after probe, all the intel_plane_state variables
	 * are already calculated and there is no assert_plane warnings
	 * during bootup.
	 */
	ret = intel_initial_commit(dev);
	if (ret)
		drm_dbg_kms(&i915->drm, "Initial commit in probe failed.\n");

	return 0;
}

/* part #3: call after gem init */
int intel_modeset_init(struct drm_i915_private *i915)
{
	int ret;

	intel_overlay_setup(i915);

	if (!HAS_DISPLAY(i915))
		return 0;

	ret = intel_fbdev_init(&i915->drm);
	if (ret)
		return ret;

	/* Only enable hotplug handling once the fbdev is fully set up. */
	intel_hpd_init(i915);

	intel_init_ipc(i915);

	intel_psr_set_force_mode_changed(i915->psr.dp);

	return 0;
}

void i830_enable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe)
{
	struct intel_crtc *crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
	/* 640x480@60Hz, ~25175 kHz */
	struct dpll clock = {
		.m1 = 18,
		.m2 = 7,
		.p1 = 13,
		.p2 = 4,
		.n = 2,
	};
	u32 dpll, fp;
	int i;

	drm_WARN_ON(&dev_priv->drm,
		    i9xx_calc_dpll_params(48000, &clock) != 25154);

	drm_dbg_kms(&dev_priv->drm,
		    "enabling pipe %c due to force quirk (vco=%d dot=%d)\n",
		    pipe_name(pipe), clock.vco, clock.dot);

	fp = i9xx_dpll_compute_fp(&clock);
	dpll = DPLL_DVO_2X_MODE |
		DPLL_VGA_MODE_DIS |
		((clock.p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT) |
		PLL_P2_DIVIDE_BY_4 |
		PLL_REF_INPUT_DREFCLK |
		DPLL_VCO_ENABLE;

	intel_de_write(dev_priv, FP0(pipe), fp);
	intel_de_write(dev_priv, FP1(pipe), fp);

	intel_de_write(dev_priv, HTOTAL(pipe), (640 - 1) | ((800 - 1) << 16));
	intel_de_write(dev_priv, HBLANK(pipe), (640 - 1) | ((800 - 1) << 16));
	intel_de_write(dev_priv, HSYNC(pipe), (656 - 1) | ((752 - 1) << 16));
	intel_de_write(dev_priv, VTOTAL(pipe), (480 - 1) | ((525 - 1) << 16));
	intel_de_write(dev_priv, VBLANK(pipe), (480 - 1) | ((525 - 1) << 16));
	intel_de_write(dev_priv, VSYNC(pipe), (490 - 1) | ((492 - 1) << 16));
	intel_de_write(dev_priv, PIPESRC(pipe), ((640 - 1) << 16) | (480 - 1));

	/*
	 * Apparently we need to have VGA mode enabled prior to changing
	 * the P1/P2 dividers. Otherwise the DPLL will keep using the old
	 * dividers, even though the register value does change.
	 */
	intel_de_write(dev_priv, DPLL(pipe), dpll & ~DPLL_VGA_MODE_DIS);
	intel_de_write(dev_priv, DPLL(pipe), dpll);

	/* Wait for the clocks to stabilize. */
	intel_de_posting_read(dev_priv, DPLL(pipe));
	udelay(150);

	/* The pixel multiplier can only be updated once the
	 * DPLL is enabled and the clocks are stable.
	 *
	 * So write it again.
	 */
	intel_de_write(dev_priv, DPLL(pipe), dpll);

	/* We do this three times for luck */
	for (i = 0; i < 3 ; i++) {
		intel_de_write(dev_priv, DPLL(pipe), dpll);
		intel_de_posting_read(dev_priv, DPLL(pipe));
		udelay(150); /* wait for warmup */
	}

	intel_de_write(dev_priv, PIPECONF(pipe),
		       PIPECONF_ENABLE | PIPECONF_PROGRESSIVE);
	intel_de_posting_read(dev_priv, PIPECONF(pipe));

	intel_wait_for_pipe_scanline_moving(crtc);
}

void i830_disable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe)
{
	struct intel_crtc *crtc = intel_get_crtc_for_pipe(dev_priv, pipe);

	drm_dbg_kms(&dev_priv->drm, "disabling pipe %c due to force quirk\n",
		    pipe_name(pipe));

	drm_WARN_ON(&dev_priv->drm,
		    intel_de_read(dev_priv, DSPCNTR(PLANE_A)) &
		    DISPLAY_PLANE_ENABLE);
	drm_WARN_ON(&dev_priv->drm,
		    intel_de_read(dev_priv, DSPCNTR(PLANE_B)) &
		    DISPLAY_PLANE_ENABLE);
	drm_WARN_ON(&dev_priv->drm,
		    intel_de_read(dev_priv, DSPCNTR(PLANE_C)) &
		    DISPLAY_PLANE_ENABLE);
	drm_WARN_ON(&dev_priv->drm,
		    intel_de_read(dev_priv, CURCNTR(PIPE_A)) & MCURSOR_MODE);
	drm_WARN_ON(&dev_priv->drm,
		    intel_de_read(dev_priv, CURCNTR(PIPE_B)) & MCURSOR_MODE);

	intel_de_write(dev_priv, PIPECONF(pipe), 0);
	intel_de_posting_read(dev_priv, PIPECONF(pipe));

	intel_wait_for_pipe_scanline_stopped(crtc);

	intel_de_write(dev_priv, DPLL(pipe), DPLL_VGA_MODE_DIS);
	intel_de_posting_read(dev_priv, DPLL(pipe));
}

static void
intel_sanitize_plane_mapping(struct drm_i915_private *dev_priv)
{
	struct intel_crtc *crtc;

	if (INTEL_GEN(dev_priv) >= 4)
		return;

	for_each_intel_crtc(&dev_priv->drm, crtc) {
		struct intel_plane *plane =
			to_intel_plane(crtc->base.primary);
		struct intel_crtc *plane_crtc;
		enum pipe pipe;

		if (!plane->get_hw_state(plane, &pipe))
			continue;

		if (pipe == crtc->pipe)
			continue;

		drm_dbg_kms(&dev_priv->drm,
			    "[PLANE:%d:%s] attached to the wrong pipe, disabling plane\n",
			    plane->base.base.id, plane->base.name);

		plane_crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
		intel_plane_disable_noatomic(plane_crtc, plane);
	}
}

static bool intel_crtc_has_encoders(struct intel_crtc *crtc)
{
	struct drm_device *dev = crtc->base.dev;
	struct intel_encoder *encoder;

	for_each_encoder_on_crtc(dev, &crtc->base, encoder)
		return true;

	return false;
}

static struct intel_connector *intel_encoder_find_connector(struct intel_encoder *encoder)
{
	struct drm_device *dev = encoder->base.dev;
	struct intel_connector *connector;

	for_each_connector_on_encoder(dev, &encoder->base, connector)
		return connector;

	return NULL;
}

static bool has_pch_trancoder(struct drm_i915_private *dev_priv,
			      enum pipe pch_transcoder)
{
	return HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv) ||
		(HAS_PCH_LPT_H(dev_priv) && pch_transcoder == PIPE_A);
}

static void intel_sanitize_frame_start_delay(const struct intel_crtc_state *crtc_state)
{
	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;

	if (INTEL_GEN(dev_priv) >= 9 ||
	    IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) {
		i915_reg_t reg = CHICKEN_TRANS(cpu_transcoder);
		u32 val;

		if (transcoder_is_dsi(cpu_transcoder))
			return;

		val = intel_de_read(dev_priv, reg);
		val &= ~HSW_FRAME_START_DELAY_MASK;
		val |= HSW_FRAME_START_DELAY(0);
		intel_de_write(dev_priv, reg, val);
	} else {
		i915_reg_t reg = PIPECONF(cpu_transcoder);
		u32 val;

		val = intel_de_read(dev_priv, reg);
		val &= ~PIPECONF_FRAME_START_DELAY_MASK;
		val |= PIPECONF_FRAME_START_DELAY(0);
		intel_de_write(dev_priv, reg, val);
	}

	if (!crtc_state->has_pch_encoder)
		return;

	if (HAS_PCH_IBX(dev_priv)) {
		i915_reg_t reg = PCH_TRANSCONF(crtc->pipe);
		u32 val;

		val = intel_de_read(dev_priv, reg);
		val &= ~TRANS_FRAME_START_DELAY_MASK;
		val |= TRANS_FRAME_START_DELAY(0);
		intel_de_write(dev_priv, reg, val);
	} else {
		enum pipe pch_transcoder = intel_crtc_pch_transcoder(crtc);
		i915_reg_t reg = TRANS_CHICKEN2(pch_transcoder);
		u32 val;

		val = intel_de_read(dev_priv, reg);
		val &= ~TRANS_CHICKEN2_FRAME_START_DELAY_MASK;
		val |= TRANS_CHICKEN2_FRAME_START_DELAY(0);
		intel_de_write(dev_priv, reg, val);
	}
}

static void intel_sanitize_crtc(struct intel_crtc *crtc,
				struct drm_modeset_acquire_ctx *ctx)
{
	struct drm_device *dev = crtc->base.dev;
	struct drm_i915_private *dev_priv = to_i915(dev);
	struct intel_crtc_state *crtc_state = to_intel_crtc_state(crtc->base.state);

	if (crtc_state->hw.active) {
		struct intel_plane *plane;

		/* Clear any frame start delays used for debugging left by the BIOS */
		intel_sanitize_frame_start_delay(crtc_state);

		/* Disable everything but the primary plane */
		for_each_intel_plane_on_crtc(dev, crtc, plane) {
			const struct intel_plane_state *plane_state =
				to_intel_plane_state(plane->base.state);

			if (plane_state->uapi.visible &&
			    plane->base.type != DRM_PLANE_TYPE_PRIMARY)
				intel_plane_disable_noatomic(crtc, plane);
		}

		/*
		 * Disable any background color set by the BIOS, but enable the
		 * gamma and CSC to match how we program our planes.
		 */
		if (INTEL_GEN(dev_priv) >= 9)
			intel_de_write(dev_priv, SKL_BOTTOM_COLOR(crtc->pipe),
				       SKL_BOTTOM_COLOR_GAMMA_ENABLE | SKL_BOTTOM_COLOR_CSC_ENABLE);
	}

	/* Adjust the state of the output pipe according to whether we
	 * have active connectors/encoders. */
	if (crtc_state->hw.active && !intel_crtc_has_encoders(crtc))
		intel_crtc_disable_noatomic(crtc, ctx);

	if (crtc_state->hw.active || HAS_GMCH(dev_priv)) {
		/*
		 * We start out with underrun reporting disabled to avoid races.
		 * For correct bookkeeping mark this on active crtcs.
		 *
		 * Also on gmch platforms we dont have any hardware bits to
		 * disable the underrun reporting. Which means we need to start
		 * out with underrun reporting disabled also on inactive pipes,
		 * since otherwise we'll complain about the garbage we read when
		 * e.g. coming up after runtime pm.
		 *
		 * No protection against concurrent access is required - at
		 * worst a fifo underrun happens which also sets this to false.
		 */
		crtc->cpu_fifo_underrun_disabled = true;
		/*
		 * We track the PCH trancoder underrun reporting state
		 * within the crtc. With crtc for pipe A housing the underrun
		 * reporting state for PCH transcoder A, crtc for pipe B housing
		 * it for PCH transcoder B, etc. LPT-H has only PCH transcoder A,
		 * and marking underrun reporting as disabled for the non-existing
		 * PCH transcoders B and C would prevent enabling the south
		 * error interrupt (see cpt_can_enable_serr_int()).
		 */
		if (has_pch_trancoder(dev_priv, crtc->pipe))
			crtc->pch_fifo_underrun_disabled = true;
	}
}

static bool has_bogus_dpll_config(const struct intel_crtc_state *crtc_state)
{
	struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);

	/*
	 * Some SNB BIOSen (eg. ASUS K53SV) are known to misprogram
	 * the hardware when a high res displays plugged in. DPLL P
	 * divider is zero, and the pipe timings are bonkers. We'll
	 * try to disable everything in that case.
	 *
	 * FIXME would be nice to be able to sanitize this state
	 * without several WARNs, but for now let's take the easy
	 * road.
	 */
	return IS_GEN(dev_priv, 6) &&
		crtc_state->hw.active &&
		crtc_state->shared_dpll &&
		crtc_state->port_clock == 0;
}

static void intel_sanitize_encoder(struct intel_encoder *encoder)
{
	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
	struct intel_connector *connector;
	struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
	struct intel_crtc_state *crtc_state = crtc ?
		to_intel_crtc_state(crtc->base.state) : NULL;

	/* We need to check both for a crtc link (meaning that the
	 * encoder is active and trying to read from a pipe) and the
	 * pipe itself being active. */
	bool has_active_crtc = crtc_state &&
		crtc_state->hw.active;

	if (crtc_state && has_bogus_dpll_config(crtc_state)) {
		drm_dbg_kms(&dev_priv->drm,
			    "BIOS has misprogrammed the hardware. Disabling pipe %c\n",
			    pipe_name(crtc->pipe));
		has_active_crtc = false;
	}

	connector = intel_encoder_find_connector(encoder);
	if (connector && !has_active_crtc) {
		drm_dbg_kms(&dev_priv->drm,
			    "[ENCODER:%d:%s] has active connectors but no active pipe!\n",
			    encoder->base.base.id,
			    encoder->base.name);

		/* Connector is active, but has no active pipe. This is
		 * fallout from our resume register restoring. Disable
		 * the encoder manually again. */
		if (crtc_state) {
			struct drm_encoder *best_encoder;

			drm_dbg_kms(&dev_priv->drm,
				    "[ENCODER:%d:%s] manually disabled\n",
				    encoder->base.base.id,
				    encoder->base.name);

			/* avoid oopsing in case the hooks consult best_encoder */
			best_encoder = connector->base.state->best_encoder;
			connector->base.state->best_encoder = &encoder->base;

			/* FIXME NULL atomic state passed! */
			if (encoder->disable)
				encoder->disable(NULL, encoder, crtc_state,
						 connector->base.state);
			if (encoder->post_disable)
				encoder->post_disable(NULL, encoder, crtc_state,
						      connector->base.state);

			connector->base.state->best_encoder = best_encoder;
		}
		encoder->base.crtc = NULL;

		/* Inconsistent output/port/pipe state happens presumably due to
		 * a bug in one of the get_hw_state functions. Or someplace else
		 * in our code, like the register restore mess on resume. Clamp
		 * things to off as a safer default. */

		connector->base.dpms = DRM_MODE_DPMS_OFF;
		connector->base.encoder = NULL;
	}

	/* notify opregion of the sanitized encoder state */
	intel_opregion_notify_encoder(encoder, connector && has_active_crtc);

	if (INTEL_GEN(dev_priv) >= 11)
		icl_sanitize_encoder_pll_mapping(encoder);
}

/* FIXME read out full plane state for all planes */
static void readout_plane_state(struct drm_i915_private *dev_priv)
{
	struct intel_plane *plane;
	struct intel_crtc *crtc;

	for_each_intel_plane(&dev_priv->drm, plane) {
		struct intel_plane_state *plane_state =
			to_intel_plane_state(plane->base.state);
		struct intel_crtc_state *crtc_state;
		enum pipe pipe = PIPE_A;
		bool visible;

		visible = plane->get_hw_state(plane, &pipe);

		crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
		crtc_state = to_intel_crtc_state(crtc->base.state);

		intel_set_plane_visible(crtc_state, plane_state, visible);

		drm_dbg_kms(&dev_priv->drm,
			    "[PLANE:%d:%s] hw state readout: %s, pipe %c\n",
			    plane->base.base.id, plane->base.name,
			    enableddisabled(visible), pipe_name(pipe));
	}

	for_each_intel_crtc(&dev_priv->drm, crtc) {
		struct intel_crtc_state *crtc_state =
			to_intel_crtc_state(crtc->base.state);

		fixup_active_planes(crtc_state);
	}
}

static void intel_modeset_readout_hw_state(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = to_i915(dev);
	struct intel_cdclk_state *cdclk_state =
		to_intel_cdclk_state(dev_priv->cdclk.obj.state);
	struct intel_dbuf_state *dbuf_state =
		to_intel_dbuf_state(dev_priv->dbuf.obj.state);
	enum pipe pipe;
	struct intel_crtc *crtc;
	struct intel_encoder *encoder;
	struct intel_connector *connector;
	struct drm_connector_list_iter conn_iter;
	u8 active_pipes = 0;

	for_each_intel_crtc(dev, crtc) {
		struct intel_crtc_state *crtc_state =
			to_intel_crtc_state(crtc->base.state);

		__drm_atomic_helper_crtc_destroy_state(&crtc_state->uapi);
		intel_crtc_free_hw_state(crtc_state);
		intel_crtc_state_reset(crtc_state, crtc);

		crtc_state->hw.active = crtc_state->hw.enable =
			dev_priv->display.get_pipe_config(crtc, crtc_state);

		crtc->base.enabled = crtc_state->hw.enable;
		crtc->active = crtc_state->hw.active;

		if (crtc_state->hw.active)
			active_pipes |= BIT(crtc->pipe);

		drm_dbg_kms(&dev_priv->drm,
			    "[CRTC:%d:%s] hw state readout: %s\n",
			    crtc->base.base.id, crtc->base.name,
			    enableddisabled(crtc_state->hw.active));
	}

	dev_priv->active_pipes = cdclk_state->active_pipes =
		dbuf_state->active_pipes = active_pipes;

	readout_plane_state(dev_priv);

	intel_dpll_readout_hw_state(dev_priv);

	for_each_intel_encoder(dev, encoder) {
		pipe = 0;

		if (encoder->get_hw_state(encoder, &pipe)) {
			struct intel_crtc_state *crtc_state;

			crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
			crtc_state = to_intel_crtc_state(crtc->base.state);

			encoder->base.crtc = &crtc->base;
			encoder->get_config(encoder, crtc_state);
		} else {
			encoder->base.crtc = NULL;
		}

		drm_dbg_kms(&dev_priv->drm,
			    "[ENCODER:%d:%s] hw state readout: %s, pipe %c\n",
			    encoder->base.base.id, encoder->base.name,
			    enableddisabled(encoder->base.crtc),
			    pipe_name(pipe));
	}

	drm_connector_list_iter_begin(dev, &conn_iter);
	for_each_intel_connector_iter(connector, &conn_iter) {
		if (connector->get_hw_state(connector)) {
			struct intel_crtc_state *crtc_state;
			struct intel_crtc *crtc;

			connector->base.dpms = DRM_MODE_DPMS_ON;

			encoder = intel_attached_encoder(connector);
			connector->base.encoder = &encoder->base;

			crtc = to_intel_crtc(encoder->base.crtc);
			crtc_state = crtc ? to_intel_crtc_state(crtc->base.state) : NULL;

			if (crtc_state && crtc_state->hw.active) {
				/*
				 * This has to be done during hardware readout
				 * because anything calling .crtc_disable may
				 * rely on the connector_mask being accurate.
				 */
				crtc_state->uapi.connector_mask |=
					drm_connector_mask(&connector->base);
				crtc_state->uapi.encoder_mask |=
					drm_encoder_mask(&encoder->base);
			}
		} else {
			connector->base.dpms = DRM_MODE_DPMS_OFF;
			connector->base.encoder = NULL;
		}
		drm_dbg_kms(&dev_priv->drm,
			    "[CONNECTOR:%d:%s] hw state readout: %s\n",
			    connector->base.base.id, connector->base.name,
			    enableddisabled(connector->base.encoder));
	}
	drm_connector_list_iter_end(&conn_iter);

	for_each_intel_crtc(dev, crtc) {
		struct intel_bw_state *bw_state =
			to_intel_bw_state(dev_priv->bw_obj.state);
		struct intel_crtc_state *crtc_state =
			to_intel_crtc_state(crtc->base.state);
		struct intel_plane *plane;
		int min_cdclk = 0;

		if (crtc_state->hw.active) {
			struct drm_display_mode *mode = &crtc_state->hw.mode;

			intel_mode_from_pipe_config(&crtc_state->hw.adjusted_mode,
						    crtc_state);

			*mode = crtc_state->hw.adjusted_mode;
			mode->hdisplay = crtc_state->pipe_src_w;
			mode->vdisplay = crtc_state->pipe_src_h;

			/*
			 * The initial mode needs to be set in order to keep
			 * the atomic core happy. It wants a valid mode if the
			 * crtc's enabled, so we do the above call.
			 *
			 * But we don't set all the derived state fully, hence
			 * set a flag to indicate that a full recalculation is
			 * needed on the next commit.
			 */
			crtc_state->inherited = true;

			intel_crtc_compute_pixel_rate(crtc_state);

			intel_crtc_update_active_timings(crtc_state);

			intel_crtc_copy_hw_to_uapi_state(crtc_state);
		}

		for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, plane) {
			const struct intel_plane_state *plane_state =
				to_intel_plane_state(plane->base.state);

			/*
			 * FIXME don't have the fb yet, so can't
			 * use intel_plane_data_rate() :(
			 */
			if (plane_state->uapi.visible)
				crtc_state->data_rate[plane->id] =
					4 * crtc_state->pixel_rate;
			/*
			 * FIXME don't have the fb yet, so can't
			 * use plane->min_cdclk() :(
			 */
			if (plane_state->uapi.visible && plane->min_cdclk) {
				if (crtc_state->double_wide ||
				    INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
					crtc_state->min_cdclk[plane->id] =
						DIV_ROUND_UP(crtc_state->pixel_rate, 2);
				else
					crtc_state->min_cdclk[plane->id] =
						crtc_state->pixel_rate;
			}
			drm_dbg_kms(&dev_priv->drm,
				    "[PLANE:%d:%s] min_cdclk %d kHz\n",
				    plane->base.base.id, plane->base.name,
				    crtc_state->min_cdclk[plane->id]);
		}

		if (crtc_state->hw.active) {
			min_cdclk = intel_crtc_compute_min_cdclk(crtc_state);
			if (drm_WARN_ON(dev, min_cdclk < 0))
				min_cdclk = 0;
		}

		cdclk_state->min_cdclk[crtc->pipe] = min_cdclk;
		cdclk_state->min_voltage_level[crtc->pipe] =
			crtc_state->min_voltage_level;

		intel_bw_crtc_update(bw_state, crtc_state);

		intel_pipe_config_sanity_check(dev_priv, crtc_state);
	}
}

static void
get_encoder_power_domains(struct drm_i915_private *dev_priv)
{
	struct intel_encoder *encoder;

	for_each_intel_encoder(&dev_priv->drm, encoder) {
		struct intel_crtc_state *crtc_state;

		if (!encoder->get_power_domains)
			continue;

		/*
		 * MST-primary and inactive encoders don't have a crtc state
		 * and neither of these require any power domain references.
		 */
		if (!encoder->base.crtc)
			continue;

		crtc_state = to_intel_crtc_state(encoder->base.crtc->state);
		encoder->get_power_domains(encoder, crtc_state);
	}
}

static void intel_early_display_was(struct drm_i915_private *dev_priv)
{
	/*
	 * Display WA #1185 WaDisableDARBFClkGating:cnl,glk,icl,ehl,tgl
	 * Also known as Wa_14010480278.
	 */
	if (IS_GEN_RANGE(dev_priv, 10, 12) || IS_GEMINILAKE(dev_priv))
		intel_de_write(dev_priv, GEN9_CLKGATE_DIS_0,
			       intel_de_read(dev_priv, GEN9_CLKGATE_DIS_0) | DARBF_GATING_DIS);

	if (IS_HASWELL(dev_priv)) {
		/*
		 * WaRsPkgCStateDisplayPMReq:hsw
		 * System hang if this isn't done before disabling all planes!
		 */
		intel_de_write(dev_priv, CHICKEN_PAR1_1,
			       intel_de_read(dev_priv, CHICKEN_PAR1_1) | FORCE_ARB_IDLE_PLANES);
	}
}

static void ibx_sanitize_pch_hdmi_port(struct drm_i915_private *dev_priv,
				       enum port port, i915_reg_t hdmi_reg)
{
	u32 val = intel_de_read(dev_priv, hdmi_reg);

	if (val & SDVO_ENABLE ||
	    (val & SDVO_PIPE_SEL_MASK) == SDVO_PIPE_SEL(PIPE_A))
		return;

	drm_dbg_kms(&dev_priv->drm,
		    "Sanitizing transcoder select for HDMI %c\n",
		    port_name(port));

	val &= ~SDVO_PIPE_SEL_MASK;
	val |= SDVO_PIPE_SEL(PIPE_A);

	intel_de_write(dev_priv, hdmi_reg, val);
}

static void ibx_sanitize_pch_dp_port(struct drm_i915_private *dev_priv,
				     enum port port, i915_reg_t dp_reg)
{
	u32 val = intel_de_read(dev_priv, dp_reg);

	if (val & DP_PORT_EN ||
	    (val & DP_PIPE_SEL_MASK) == DP_PIPE_SEL(PIPE_A))
		return;

	drm_dbg_kms(&dev_priv->drm,
		    "Sanitizing transcoder select for DP %c\n",
		    port_name(port));

	val &= ~DP_PIPE_SEL_MASK;
	val |= DP_PIPE_SEL(PIPE_A);

	intel_de_write(dev_priv, dp_reg, val);
}

static void ibx_sanitize_pch_ports(struct drm_i915_private *dev_priv)
{
	/*
	 * The BIOS may select transcoder B on some of the PCH
	 * ports even it doesn't enable the port. This would trip
	 * assert_pch_dp_disabled() and assert_pch_hdmi_disabled().
	 * Sanitize the transcoder select bits to prevent that. We
	 * assume that the BIOS never actually enabled the port,
	 * because if it did we'd actually have to toggle the port
	 * on and back off to make the transcoder A select stick
	 * (see. intel_dp_link_down(), intel_disable_hdmi(),
	 * intel_disable_sdvo()).
	 */
	ibx_sanitize_pch_dp_port(dev_priv, PORT_B, PCH_DP_B);
	ibx_sanitize_pch_dp_port(dev_priv, PORT_C, PCH_DP_C);
	ibx_sanitize_pch_dp_port(dev_priv, PORT_D, PCH_DP_D);

	/* PCH SDVOB multiplex with HDMIB */
	ibx_sanitize_pch_hdmi_port(dev_priv, PORT_B, PCH_HDMIB);
	ibx_sanitize_pch_hdmi_port(dev_priv, PORT_C, PCH_HDMIC);
	ibx_sanitize_pch_hdmi_port(dev_priv, PORT_D, PCH_HDMID);
}

/* Scan out the current hw modeset state,
 * and sanitizes it to the current state
 */
static void
intel_modeset_setup_hw_state(struct drm_device *dev,
			     struct drm_modeset_acquire_ctx *ctx)
{
	struct drm_i915_private *dev_priv = to_i915(dev);
	struct intel_encoder *encoder;
	struct intel_crtc *crtc;
	intel_wakeref_t wakeref;

	wakeref = intel_display_power_get(dev_priv, POWER_DOMAIN_INIT);

	intel_early_display_was(dev_priv);
	intel_modeset_readout_hw_state(dev);

	/* HW state is read out, now we need to sanitize this mess. */

	/* Sanitize the TypeC port mode upfront, encoders depend on this */
	for_each_intel_encoder(dev, encoder) {
		enum phy phy = intel_port_to_phy(dev_priv, encoder->port);

		/* We need to sanitize only the MST primary port. */
		if (encoder->type != INTEL_OUTPUT_DP_MST &&
		    intel_phy_is_tc(dev_priv, phy))
			intel_tc_port_sanitize(enc_to_dig_port(encoder));
	}

	get_encoder_power_domains(dev_priv);

	if (HAS_PCH_IBX(dev_priv))
		ibx_sanitize_pch_ports(dev_priv);

	/*
	 * intel_sanitize_plane_mapping() may need to do vblank
	 * waits, so we need vblank interrupts restored beforehand.
	 */
	for_each_intel_crtc(&dev_priv->drm, crtc) {
		struct intel_crtc_state *crtc_state =
			to_intel_crtc_state(crtc->base.state);

		drm_crtc_vblank_reset(&crtc->base);

		if (crtc_state->hw.active)
			intel_crtc_vblank_on(crtc_state);
	}

	intel_sanitize_plane_mapping(dev_priv);

	for_each_intel_encoder(dev, encoder)
		intel_sanitize_encoder(encoder);

	for_each_intel_crtc(&dev_priv->drm, crtc) {
		struct intel_crtc_state *crtc_state =
			to_intel_crtc_state(crtc->base.state);

		intel_sanitize_crtc(crtc, ctx);
		intel_dump_pipe_config(crtc_state, NULL, "[setup_hw_state]");
	}

	intel_modeset_update_connector_atomic_state(dev);

	intel_dpll_sanitize_state(dev_priv);

	if (IS_G4X(dev_priv)) {
		g4x_wm_get_hw_state(dev_priv);
		g4x_wm_sanitize(dev_priv);
	} else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
		vlv_wm_get_hw_state(dev_priv);
		vlv_wm_sanitize(dev_priv);
	} else if (INTEL_GEN(dev_priv) >= 9) {
		skl_wm_get_hw_state(dev_priv);
	} else if (HAS_PCH_SPLIT(dev_priv)) {
		ilk_wm_get_hw_state(dev_priv);
	}

	for_each_intel_crtc(dev, crtc) {
		struct intel_crtc_state *crtc_state =
			to_intel_crtc_state(crtc->base.state);
		u64 put_domains;

		put_domains = modeset_get_crtc_power_domains(crtc_state);
		if (drm_WARN_ON(dev, put_domains))
			modeset_put_power_domains(dev_priv, put_domains);
	}

	intel_display_power_put(dev_priv, POWER_DOMAIN_INIT, wakeref);
}

void intel_display_resume(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = to_i915(dev);
	struct drm_atomic_state *state = dev_priv->modeset_restore_state;
	struct drm_modeset_acquire_ctx ctx;
	int ret;

	dev_priv->modeset_restore_state = NULL;
	if (state)
		state->acquire_ctx = &ctx;

	drm_modeset_acquire_init(&ctx, 0);

	while (1) {
		ret = drm_modeset_lock_all_ctx(dev, &ctx);
		if (ret != -EDEADLK)
			break;

		drm_modeset_backoff(&ctx);
	}

	if (!ret)
		ret = __intel_display_resume(dev, state, &ctx);

	intel_enable_ipc(dev_priv);
	drm_modeset_drop_locks(&ctx);
	drm_modeset_acquire_fini(&ctx);

	if (ret)
		drm_err(&dev_priv->drm,
			"Restoring old state failed with %i\n", ret);
	if (state)
		drm_atomic_state_put(state);
}

static void intel_hpd_poll_fini(struct drm_i915_private *i915)
{
	struct intel_connector *connector;
	struct drm_connector_list_iter conn_iter;

	/* Kill all the work that may have been queued by hpd. */
	drm_connector_list_iter_begin(&i915->drm, &conn_iter);
	for_each_intel_connector_iter(connector, &conn_iter) {
		if (connector->modeset_retry_work.func)
			cancel_work_sync(&connector->modeset_retry_work);
		if (connector->hdcp.shim) {
			cancel_delayed_work_sync(&connector->hdcp.check_work);
			cancel_work_sync(&connector->hdcp.prop_work);
		}
	}
	drm_connector_list_iter_end(&conn_iter);
}

/* part #1: call before irq uninstall */
void intel_modeset_driver_remove(struct drm_i915_private *i915)
{
	flush_workqueue(i915->flip_wq);
	flush_workqueue(i915->modeset_wq);

	flush_work(&i915->atomic_helper.free_work);
	drm_WARN_ON(&i915->drm, !llist_empty(&i915->atomic_helper.free_list));
}

/* part #2: call after irq uninstall */
void intel_modeset_driver_remove_noirq(struct drm_i915_private *i915)
{
	/*
	 * Due to the hpd irq storm handling the hotplug work can re-arm the
	 * poll handlers. Hence disable polling after hpd handling is shut down.
	 */
	intel_hpd_poll_fini(i915);

	/*
	 * MST topology needs to be suspended so we don't have any calls to
	 * fbdev after it's finalized. MST will be destroyed later as part of
	 * drm_mode_config_cleanup()
	 */
	intel_dp_mst_suspend(i915);

	/* poll work can call into fbdev, hence clean that up afterwards */
	intel_fbdev_fini(i915);

	intel_unregister_dsm_handler();

	intel_fbc_global_disable(i915);

	/* flush any delayed tasks or pending work */
	flush_scheduled_work();

	intel_hdcp_component_fini(i915);

	intel_mode_config_cleanup(i915);

	intel_overlay_cleanup(i915);

	intel_gmbus_teardown(i915);

	destroy_workqueue(i915->flip_wq);
	destroy_workqueue(i915->modeset_wq);

	intel_fbc_cleanup_cfb(i915);
}

/* part #3: call after gem init */
void intel_modeset_driver_remove_nogem(struct drm_i915_private *i915)
{
	intel_csr_ucode_fini(i915);

	intel_power_domains_driver_remove(i915);

	intel_vga_unregister(i915);

	intel_bios_driver_remove(i915);
}

#if IS_ENABLED(CONFIG_DRM_I915_CAPTURE_ERROR)

struct intel_display_error_state {

	u32 power_well_driver;

	struct intel_cursor_error_state {
		u32 control;
		u32 position;
		u32 base;
		u32 size;
	} cursor[I915_MAX_PIPES];

	struct intel_pipe_error_state {
		bool power_domain_on;
		u32 source;
		u32 stat;
	} pipe[I915_MAX_PIPES];

	struct intel_plane_error_state {
		u32 control;
		u32 stride;
		u32 size;
		u32 pos;
		u32 addr;
		u32 surface;
		u32 tile_offset;
	} plane[I915_MAX_PIPES];

	struct intel_transcoder_error_state {
		bool available;
		bool power_domain_on;
		enum transcoder cpu_transcoder;

		u32 conf;

		u32 htotal;
		u32 hblank;
		u32 hsync;
		u32 vtotal;
		u32 vblank;
		u32 vsync;
	} transcoder[5];
};

struct intel_display_error_state *
intel_display_capture_error_state(struct drm_i915_private *dev_priv)
{
	struct intel_display_error_state *error;
	int transcoders[] = {
		TRANSCODER_A,
		TRANSCODER_B,
		TRANSCODER_C,
		TRANSCODER_D,
		TRANSCODER_EDP,
	};
	int i;

	BUILD_BUG_ON(ARRAY_SIZE(transcoders) != ARRAY_SIZE(error->transcoder));

	if (!HAS_DISPLAY(dev_priv))
		return NULL;

	error = kzalloc(sizeof(*error), GFP_ATOMIC);
	if (error == NULL)
		return NULL;

	if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
		error->power_well_driver = intel_de_read(dev_priv,
							 HSW_PWR_WELL_CTL2);

	for_each_pipe(dev_priv, i) {
		error->pipe[i].power_domain_on =
			__intel_display_power_is_enabled(dev_priv,
							 POWER_DOMAIN_PIPE(i));
		if (!error->pipe[i].power_domain_on)
			continue;

		error->cursor[i].control = intel_de_read(dev_priv, CURCNTR(i));
		error->cursor[i].position = intel_de_read(dev_priv, CURPOS(i));
		error->cursor[i].base = intel_de_read(dev_priv, CURBASE(i));

		error->plane[i].control = intel_de_read(dev_priv, DSPCNTR(i));
		error->plane[i].stride = intel_de_read(dev_priv, DSPSTRIDE(i));
		if (INTEL_GEN(dev_priv) <= 3) {
			error->plane[i].size = intel_de_read(dev_priv,
							     DSPSIZE(i));
			error->plane[i].pos = intel_de_read(dev_priv,
							    DSPPOS(i));
		}
		if (INTEL_GEN(dev_priv) <= 7 && !IS_HASWELL(dev_priv))
			error->plane[i].addr = intel_de_read(dev_priv,
							     DSPADDR(i));
		if (INTEL_GEN(dev_priv) >= 4) {
			error->plane[i].surface = intel_de_read(dev_priv,
								DSPSURF(i));
			error->plane[i].tile_offset = intel_de_read(dev_priv,
								    DSPTILEOFF(i));
		}

		error->pipe[i].source = intel_de_read(dev_priv, PIPESRC(i));

		if (HAS_GMCH(dev_priv))
			error->pipe[i].stat = intel_de_read(dev_priv,
							    PIPESTAT(i));
	}

	for (i = 0; i < ARRAY_SIZE(error->transcoder); i++) {
		enum transcoder cpu_transcoder = transcoders[i];

		if (!HAS_TRANSCODER(dev_priv, cpu_transcoder))
			continue;

		error->transcoder[i].available = true;
		error->transcoder[i].power_domain_on =
			__intel_display_power_is_enabled(dev_priv,
				POWER_DOMAIN_TRANSCODER(cpu_transcoder));
		if (!error->transcoder[i].power_domain_on)
			continue;

		error->transcoder[i].cpu_transcoder = cpu_transcoder;

		error->transcoder[i].conf = intel_de_read(dev_priv,
							  PIPECONF(cpu_transcoder));
		error->transcoder[i].htotal = intel_de_read(dev_priv,
							    HTOTAL(cpu_transcoder));
		error->transcoder[i].hblank = intel_de_read(dev_priv,
							    HBLANK(cpu_transcoder));
		error->transcoder[i].hsync = intel_de_read(dev_priv,
							   HSYNC(cpu_transcoder));
		error->transcoder[i].vtotal = intel_de_read(dev_priv,
							    VTOTAL(cpu_transcoder));
		error->transcoder[i].vblank = intel_de_read(dev_priv,
							    VBLANK(cpu_transcoder));
		error->transcoder[i].vsync = intel_de_read(dev_priv,
							   VSYNC(cpu_transcoder));
	}

	return error;
}

#define err_printf(e, ...) i915_error_printf(e, __VA_ARGS__)

void
intel_display_print_error_state(struct drm_i915_error_state_buf *m,
				struct intel_display_error_state *error)
{
	struct drm_i915_private *dev_priv = m->i915;
	int i;

	if (!error)
		return;

	err_printf(m, "Num Pipes: %d\n", INTEL_NUM_PIPES(dev_priv));
	if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
		err_printf(m, "PWR_WELL_CTL2: %08x\n",
			   error->power_well_driver);
	for_each_pipe(dev_priv, i) {
		err_printf(m, "Pipe [%d]:\n", i);
		err_printf(m, "  Power: %s\n",
			   onoff(error->pipe[i].power_domain_on));
		err_printf(m, "  SRC: %08x\n", error->pipe[i].source);
		err_printf(m, "  STAT: %08x\n", error->pipe[i].stat);

		err_printf(m, "Plane [%d]:\n", i);
		err_printf(m, "  CNTR: %08x\n", error->plane[i].control);
		err_printf(m, "  STRIDE: %08x\n", error->plane[i].stride);
		if (INTEL_GEN(dev_priv) <= 3) {
			err_printf(m, "  SIZE: %08x\n", error->plane[i].size);
			err_printf(m, "  POS: %08x\n", error->plane[i].pos);
		}
		if (INTEL_GEN(dev_priv) <= 7 && !IS_HASWELL(dev_priv))
			err_printf(m, "  ADDR: %08x\n", error->plane[i].addr);
		if (INTEL_GEN(dev_priv) >= 4) {
			err_printf(m, "  SURF: %08x\n", error->plane[i].surface);
			err_printf(m, "  TILEOFF: %08x\n", error->plane[i].tile_offset);
		}

		err_printf(m, "Cursor [%d]:\n", i);
		err_printf(m, "  CNTR: %08x\n", error->cursor[i].control);
		err_printf(m, "  POS: %08x\n", error->cursor[i].position);
		err_printf(m, "  BASE: %08x\n", error->cursor[i].base);
	}

	for (i = 0; i < ARRAY_SIZE(error->transcoder); i++) {
		if (!error->transcoder[i].available)
			continue;

		err_printf(m, "CPU transcoder: %s\n",
			   transcoder_name(error->transcoder[i].cpu_transcoder));
		err_printf(m, "  Power: %s\n",
			   onoff(error->transcoder[i].power_domain_on));
		err_printf(m, "  CONF: %08x\n", error->transcoder[i].conf);
		err_printf(m, "  HTOTAL: %08x\n", error->transcoder[i].htotal);
		err_printf(m, "  HBLANK: %08x\n", error->transcoder[i].hblank);
		err_printf(m, "  HSYNC: %08x\n", error->transcoder[i].hsync);
		err_printf(m, "  VTOTAL: %08x\n", error->transcoder[i].vtotal);
		err_printf(m, "  VBLANK: %08x\n", error->transcoder[i].vblank);
		err_printf(m, "  VSYNC: %08x\n", error->transcoder[i].vsync);
	}
}

#endif