iommu/mediatek: Add mt2712 IOMMU support
The M4U IP blocks in mt2712 is MTK's generation2 M4U which use the
ARM Short-descriptor like mt8173, and most of the HW registers are
the same.
The difference is that there are 2 M4U HWs in mt2712 while there's
only one in mt8173. The purpose of 2 M4U HWs is for balance the
bandwidth.
Normally if there are 2 M4U HWs, there should be 2 iommu domains,
each M4U has a iommu domain.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index 13f8c45..8ffe321 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -23,7 +23,10 @@
#include <soc/mediatek/smi.h>
#include <dt-bindings/memory/mt2701-larb-port.h>
+/* mt8173 */
#define SMI_LARB_MMU_EN 0xf00
+
+/* mt2701 */
#define REG_SMI_SECUR_CON_BASE 0x5c0
/* every register control 8 port, register offset 0x4 */
@@ -41,6 +44,10 @@
/* mt2701 domain should be set to 3 */
#define SMI_SECUR_CON_VAL_DOMAIN(id) (0x3 << ((((id) & 0x7) << 2) + 1))
+/* mt2712 */
+#define SMI_LARB_NONSEC_CON(id) (0x380 + ((id) * 4))
+#define F_MMU_EN BIT(0)
+
struct mtk_smi_larb_gen {
bool need_larbid;
int port_in_larb[MTK_LARB_NR_MAX + 1];
@@ -149,6 +156,15 @@ mtk_smi_larb_bind(struct device *dev, struct device *master, void *data)
struct mtk_smi_iommu *smi_iommu = data;
unsigned int i;
+ if (larb->larb_gen->need_larbid) {
+ larb->mmu = &smi_iommu->larb_imu[larb->larbid].mmu;
+ return 0;
+ }
+
+ /*
+ * If there is no larbid property, Loop to find the corresponding
+ * iommu information.
+ */
for (i = 0; i < smi_iommu->larb_nr; i++) {
if (dev == smi_iommu->larb_imu[i].dev) {
/* The 'mmu' may be updated in iommu-attach/detach. */
@@ -159,14 +175,33 @@ mtk_smi_larb_bind(struct device *dev, struct device *master, void *data)
return -ENODEV;
}
-static void mtk_smi_larb_config_port(struct device *dev)
+static void mtk_smi_larb_config_port_mt2712(struct device *dev)
+{
+ struct mtk_smi_larb *larb = dev_get_drvdata(dev);
+ u32 reg;
+ int i;
+
+ /*
+ * larb 8/9 is the bdpsys larb, the iommu_en is enabled defaultly.
+ * Don't need to set it again.
+ */
+ if (larb->larbid == 8 || larb->larbid == 9)
+ return;
+
+ for_each_set_bit(i, (unsigned long *)larb->mmu, 32) {
+ reg = readl_relaxed(larb->base + SMI_LARB_NONSEC_CON(i));
+ reg |= F_MMU_EN;
+ writel(reg, larb->base + SMI_LARB_NONSEC_CON(i));
+ }
+}
+
+static void mtk_smi_larb_config_port_mt8173(struct device *dev)
{
struct mtk_smi_larb *larb = dev_get_drvdata(dev);
writel(*larb->mmu, larb->base + SMI_LARB_MMU_EN);
}
-
static void mtk_smi_larb_config_port_gen1(struct device *dev)
{
struct mtk_smi_larb *larb = dev_get_drvdata(dev);
@@ -211,7 +246,7 @@ static const struct component_ops mtk_smi_larb_component_ops = {
static const struct mtk_smi_larb_gen mtk_smi_larb_mt8173 = {
/* mt8173 do not need the port in larb */
- .config_port = mtk_smi_larb_config_port,
+ .config_port = mtk_smi_larb_config_port_mt8173,
};
static const struct mtk_smi_larb_gen mtk_smi_larb_mt2701 = {
@@ -223,6 +258,11 @@ static const struct mtk_smi_larb_gen mtk_smi_larb_mt2701 = {
.config_port = mtk_smi_larb_config_port_gen1,
};
+static const struct mtk_smi_larb_gen mtk_smi_larb_mt2712 = {
+ .need_larbid = true,
+ .config_port = mtk_smi_larb_config_port_mt2712,
+};
+
static const struct of_device_id mtk_smi_larb_of_ids[] = {
{
.compatible = "mediatek,mt8173-smi-larb",
@@ -232,6 +272,10 @@ static const struct of_device_id mtk_smi_larb_of_ids[] = {
.compatible = "mediatek,mt2701-smi-larb",
.data = &mtk_smi_larb_mt2701
},
+ {
+ .compatible = "mediatek,mt2712-smi-larb",
+ .data = &mtk_smi_larb_mt2712
+ },
{}
};
@@ -318,6 +362,10 @@ static const struct of_device_id mtk_smi_common_of_ids[] = {
.compatible = "mediatek,mt2701-smi-common",
.data = (void *)MTK_SMI_GEN1
},
+ {
+ .compatible = "mediatek,mt2712-smi-common",
+ .data = (void *)MTK_SMI_GEN2
+ },
{}
};
