# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra124-sor.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: NVIDIA Tegra SOR Output Encoder

maintainers:
  - Thierry Reding <thierry.reding@gmail.com>
  - Jon Hunter <jonathanh@nvidia.com>

description: |
  The Serial Output Resource (SOR) can be used to drive HDMI, LVDS, eDP
  and DP outputs.

properties:
  $nodename:
    pattern: "^sor@[0-9a-f]+$"

  compatible:
    oneOf:
      - enum:
          - nvidia,tegra124-sor
          - nvidia,tegra210-sor
          - nvidia,tegra210-sor1
          - nvidia,tegra186-sor
          - nvidia,tegra186-sor1
          - nvidia,tegra194-sor

      - items:
          - const: nvidia,tegra132-sor
          - const: nvidia,tegra124-sor

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  clocks:
    minItems: 5
    maxItems: 6

  clock-names:
    minItems: 5
    maxItems: 6

  resets:
    items:
      - description: module reset

  reset-names:
    items:
      - const: sor

  power-domains:
    maxItems: 1

  avdd-io-hdmi-dp-supply:
    description: I/O supply for HDMI/DP

  vdd-hdmi-dp-pll-supply:
    description: PLL supply for HDMI/DP

  hdmi-supply:
    description: +5.0V HDMI connector supply, required for HDMI

  # Tegra186 and later
  nvidia,interface:
    description: index of the SOR interface
    $ref: "/schemas/types.yaml#/definitions/uint32"

  nvidia,ddc-i2c-bus:
    description: phandle of an I2C controller used for DDC EDID
      probing
    $ref: "/schemas/types.yaml#/definitions/phandle"

  nvidia,hpd-gpio:
    description: specifies a GPIO used for hotplug detection
    maxItems: 1

  nvidia,edid:
    description: supplies a binary EDID blob
    $ref: "/schemas/types.yaml#/definitions/uint8-array"

  nvidia,panel:
    description: phandle of a display panel, required for eDP
    $ref: "/schemas/types.yaml#/definitions/phandle"

  nvidia,xbar-cfg:
    description: 5 cells containing the crossbar configuration.
      Each lane of the SOR, identified by the cell's index, is
      mapped via the crossbar to the pad specified by the cell's
      value.
    $ref: "/schemas/types.yaml#/definitions/uint32-array"

  # optional when driving an eDP output
  nvidia,dpaux:
    description: phandle to a DispayPort AUX interface
    $ref: "/schemas/types.yaml#/definitions/phandle"

allOf:
  - if:
      properties:
        compatible:
          contains:
            enum:
              - nvidia,tegra186-sor
              - nvidia,tegra194-sor
    then:
      properties:
        clocks:
          items:
            - description: clock input for the SOR hardware
            - description: SOR output clock
            - description: input for the pixel clock
            - description: reference clock for the SOR clock
            - description: safe reference clock for the SOR clock
                during power up
            - description: SOR pad output clock

        clock-names:
          items:
            - const: sor
            - enum:
                - source # deprecated
                - out
            - const: parent
            - const: dp
            - const: safe
            - const: pad
    else:
      properties:
        clocks:
          items:
            - description: clock input for the SOR hardware
            - description: SOR output clock
            - description: input for the pixel clock
            - description: reference clock for the SOR clock
            - description: safe reference clock for the SOR clock
                during power up

        clock-names:
          items:
            - const: sor
            - enum:
                - source # deprecated
                - out
            - const: parent
            - const: dp
            - const: safe

additionalProperties: false

required:
  - compatible
  - reg
  - interrupts
  - clocks
  - clock-names
  - resets
  - reset-names
  - avdd-io-hdmi-dp-supply
  - vdd-hdmi-dp-pll-supply

examples:
  - |
    #include <dt-bindings/clock/tegra210-car.h>
    #include <dt-bindings/gpio/tegra-gpio.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>

    sor0: sor@54540000 {
        compatible = "nvidia,tegra210-sor";
        reg = <0x54540000 0x00040000>;
        interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
        clocks = <&tegra_car TEGRA210_CLK_SOR0>,
                 <&tegra_car TEGRA210_CLK_SOR0_OUT>,
                 <&tegra_car TEGRA210_CLK_PLL_D_OUT0>,
                 <&tegra_car TEGRA210_CLK_PLL_DP>,
                 <&tegra_car TEGRA210_CLK_SOR_SAFE>;
        clock-names = "sor", "out", "parent", "dp", "safe";
        resets = <&tegra_car 182>;
        reset-names = "sor";
        pinctrl-0 = <&state_dpaux_aux>;
        pinctrl-1 = <&state_dpaux_i2c>;
        pinctrl-2 = <&state_dpaux_off>;
        pinctrl-names = "aux", "i2c", "off";
        power-domains = <&pd_sor>;

        avdd-io-hdmi-dp-supply = <&avdd_1v05>;
        vdd-hdmi-dp-pll-supply = <&vdd_1v8>;
        hdmi-supply = <&vdd_hdmi>;

        nvidia,ddc-i2c-bus = <&hdmi_ddc>;
        nvidia,hpd-gpio = <&gpio TEGRA_GPIO(CC, 1) GPIO_ACTIVE_LOW>;
    };