[SCSI] mpt fusion: Request I/O resources only when required
This patch modifies the I/O resource allocation behavior of FUSION
driver. The current version of driver allocates the I/O resources
even if they are not required and this creates trouble in low resource
environments. This driver now uses
pci_enable_device_mem/pci_enable_device functions to differentiate the
resource allocations.
Signed-off-by: Sathya Prakash <sathya.prakash@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index d381c38..bfda731 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -1470,9 +1470,6 @@
if (mpt_debug_level)
printk(KERN_INFO MYNAM ": mpt_debug_level=%xh\n", mpt_debug_level);
- if (pci_enable_device(pdev))
- return r;
-
ioc = kzalloc(sizeof(MPT_ADAPTER), GFP_ATOMIC);
if (ioc == NULL) {
printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n");
@@ -1482,6 +1479,20 @@
ioc->id = mpt_ids++;
sprintf(ioc->name, "ioc%d", ioc->id);
+ ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
+ if (pci_enable_device_mem(pdev)) {
+ kfree(ioc);
+ printk(MYIOC_s_ERR_FMT "pci_enable_device_mem() "
+ "failed\n", ioc->name);
+ return r;
+ }
+ if (pci_request_selected_regions(pdev, ioc->bars, "mpt")) {
+ kfree(ioc);
+ printk(MYIOC_s_ERR_FMT "pci_request_selected_regions() with "
+ "MEM failed\n", ioc->name);
+ return r;
+ }
+
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": mpt_adapter_install\n", ioc->name));
if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
@@ -1794,6 +1805,7 @@
CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
pci_disable_device(pdev);
+ pci_release_selected_regions(pdev, ioc->bars);
pci_set_power_state(pdev, device_state);
return 0;
@@ -1810,7 +1822,6 @@
MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
u32 device_state = pdev->current_state;
int recovery_state;
- int err;
printk(MYIOC_s_INFO_FMT
"pci-resume: pdev=0x%p, slot=%s, Previous operating state [D%d]\n",
@@ -1818,9 +1829,18 @@
pci_set_power_state(pdev, 0);
pci_restore_state(pdev);
- err = pci_enable_device(pdev);
- if (err)
- return err;
+ if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT) {
+ ioc->bars = pci_select_bars(ioc->pcidev, IORESOURCE_MEM |
+ IORESOURCE_IO);
+ if (pci_enable_device(pdev))
+ return 0;
+ } else {
+ ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
+ if (pci_enable_device_mem(pdev))
+ return 0;
+ }
+ if (pci_request_selected_regions(pdev, ioc->bars, "mpt"))
+ return 0;
/* enable interrupts */
CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
@@ -1881,6 +1901,7 @@
* -2 if READY but IOCFacts Failed
* -3 if READY but PrimeIOCFifos Failed
* -4 if READY but IOCInit Failed
+ * -5 if failed to enable_device and/or request_selected_regions
*/
static int
mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
@@ -1979,6 +2000,18 @@
}
}
+ if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP) &&
+ (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)) {
+ pci_release_selected_regions(ioc->pcidev, ioc->bars);
+ ioc->bars = pci_select_bars(ioc->pcidev, IORESOURCE_MEM |
+ IORESOURCE_IO);
+ if (pci_enable_device(ioc->pcidev))
+ return -5;
+ if (pci_request_selected_regions(ioc->pcidev, ioc->bars,
+ "mpt"))
+ return -5;
+ }
+
/*
* Device is reset now. It must have de-asserted the interrupt line
* (if it was asserted) and it should be safe to register for the
@@ -2383,6 +2416,9 @@
ioc->memmap = NULL;
}
+ pci_disable_device(ioc->pcidev);
+ pci_release_selected_regions(ioc->pcidev, ioc->bars);
+
#if defined(CONFIG_MTRR) && 0
if (ioc->mtrr_reg > 0) {
mtrr_del(ioc->mtrr_reg, 0, 0);
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index b49b706..d83ea96 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -629,6 +629,7 @@
dma_addr_t HostPageBuffer_dma;
int mtrr_reg;
struct pci_dev *pcidev; /* struct pci_dev pointer */
+ int bars; /* bitmask of BAR's that must be configured */
u8 __iomem *memmap; /* mmap address */
struct Scsi_Host *sh; /* Scsi Host pointer */
SpiCfgData spi_data; /* Scsi config. data */
