# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/msm/dsi-controller-main.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Qualcomm Display DSI controller

maintainers:
  - Krishna Manikandan <mkrishn@codeaurora.org>

allOf:
  - $ref: "../dsi-controller.yaml#"

properties:
  compatible:
    items:
      - const: qcom,mdss-dsi-ctrl

  reg:
    maxItems: 1

  reg-names:
    const: dsi_ctrl

  interrupts:
    maxItems: 1

  clocks:
    items:
      - description: Display byte clock
      - description: Display byte interface clock
      - description: Display pixel clock
      - description: Display escape clock
      - description: Display AHB clock
      - description: Display AXI clock

  clock-names:
    items:
      - const: byte
      - const: byte_intf
      - const: pixel
      - const: core
      - const: iface
      - const: bus

  phys:
    maxItems: 1

  phy-names:
    const: dsi

  "#address-cells": true

  "#size-cells": true

  syscon-sfpb:
    description: A phandle to mmss_sfpb syscon node (only for DSIv2).
    $ref: "/schemas/types.yaml#/definitions/phandle"

  qcom,dual-dsi-mode:
    type: boolean
    description: |
      Indicates if the DSI controller is driving a panel which needs
      2 DSI links.

  power-domains:
    maxItems: 1

  operating-points-v2: true

  ports:
    $ref: "/schemas/graph.yaml#/properties/ports"
    description: |
      Contains DSI controller input and output ports as children, each
      containing one endpoint subnode.

    properties:
      port@0:
        $ref: "/schemas/graph.yaml#/properties/port"
        description: |
          Input endpoints of the controller.
        properties:
          endpoint:
            $ref: /schemas/media/video-interfaces.yaml#
            unevaluatedProperties: false
            properties:
              data-lanes:
                maxItems: 4
                minItems: 4
                items:
                  enum: [ 0, 1, 2, 3 ]

      port@1:
        $ref: "/schemas/graph.yaml#/properties/port"
        description: |
          Output endpoints of the controller.
        properties:
          endpoint:
            $ref: /schemas/media/video-interfaces.yaml#
            unevaluatedProperties: false
            properties:
              data-lanes:
                maxItems: 4
                minItems: 4
                items:
                  enum: [ 0, 1, 2, 3 ]

    required:
      - port@0
      - port@1

required:
  - compatible
  - reg
  - reg-names
  - interrupts
  - clocks
  - clock-names
  - phys
  - phy-names
  - power-domains
  - operating-points-v2
  - ports

additionalProperties: false

examples:
  - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
     #include <dt-bindings/clock/qcom,gcc-sdm845.h>
     #include <dt-bindings/power/qcom-rpmpd.h>

     dsi@ae94000 {
           compatible = "qcom,mdss-dsi-ctrl";
           reg = <0x0ae94000 0x400>;
           reg-names = "dsi_ctrl";

           #address-cells = <1>;
           #size-cells = <0>;

           interrupt-parent = <&mdss>;
           interrupts = <4>;

           clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
                    <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
                    <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
                    <&dispcc DISP_CC_MDSS_ESC0_CLK>,
                    <&dispcc DISP_CC_MDSS_AHB_CLK>,
                    <&dispcc DISP_CC_MDSS_AXI_CLK>;
           clock-names = "byte",
                         "byte_intf",
                         "pixel",
                         "core",
                         "iface",
                         "bus";

           phys = <&dsi0_phy>;
           phy-names = "dsi";

           power-domains = <&rpmhpd SC7180_CX>;
           operating-points-v2 = <&dsi_opp_table>;

           ports {
                  #address-cells = <1>;
                  #size-cells = <0>;

                  port@0 {
                          reg = <0>;
                          dsi0_in: endpoint {
                                   remote-endpoint = <&dpu_intf1_out>;
                          };
                  };

                  port@1 {
                          reg = <1>;
                          dsi0_out: endpoint {
                                   remote-endpoint = <&sn65dsi86_in>;
                                   data-lanes = <0 1 2 3>;
                          };
                  };
           };
     };
...