// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/input/input.h>
#include "tegra30.dtsi"

/**
 * This file contains common DT entry for all fab version of Cardhu.
 * There is multiple fab version of Cardhu starting from A01 to A07.
 * Cardhu fab version A01 and A03 are not supported. Cardhu fab version
 * A02 will have different sets of GPIOs for fixed regulator compare to
 * Cardhu fab version A04. The Cardhu fab version A05, A06, A07 are
 * compatible with fab version A04. Based on Cardhu fab version, the
 * related dts file need to be chosen like for Cardhu fab version A02,
 * use tegra30-cardhu-a02.dts, Cardhu fab version A04 and later, use
 * tegra30-cardhu-a04.dts.
 * The identification of board is done in two ways, by looking the sticker
 * on PCB and by reading board id eeprom.
 * The sticker will have number like 600-81291-1000-002 C.3. In this 4th
 * number is the fab version like here it is 002 and hence fab version A02.
 * The (downstream internal) U-Boot of Cardhu display the board-id as
 * follows:
 * BoardID: 0C5B, SKU: 0A01, Fab: 02, Rev: 45.00
 * In this Fab version is 02 i.e. A02.
 * The BoardID I2C eeprom is interfaced through i2c5 (pwr_i2c address 0x56).
 * The location 0x8 of this eeprom contains the Fab version. It is 1 byte
 * wide.
 */

/ {
	model = "NVIDIA Tegra30 Cardhu evaluation board";
	compatible = "nvidia,cardhu", "nvidia,tegra30";

	aliases {
		rtc0 = "/i2c@7000d000/tps65911@2d";
		rtc1 = "/rtc@7000e000";
		serial0 = &uarta;
		serial1 = &uartc;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	memory@80000000 {
		reg = <0x80000000 0x40000000>;
	};

	pcie@3000 {
		status = "okay";

		/* AVDD_PEXA and VDD_PEXA inputs are grounded on Cardhu. */
		avdd-pexb-supply = <&ldo1_reg>;
		vdd-pexb-supply = <&ldo1_reg>;
		avdd-pex-pll-supply = <&ldo1_reg>;
		hvdd-pex-supply = <&pex_hvdd_3v3_reg>;
		vddio-pex-ctl-supply = <&sys_3v3_reg>;
		avdd-plle-supply = <&ldo2_reg>;

		pci@1,0 {
			nvidia,num-lanes = <4>;
		};

		pci@2,0 {
			nvidia,num-lanes = <1>;
		};

		pci@3,0 {
			status = "okay";
			nvidia,num-lanes = <1>;
		};
	};

	host1x@50000000 {
		dc@54200000 {
			rgb {
				status = "okay";

				nvidia,panel = <&panel>;
			};
		};
	};

	pinmux@70000868 {
		pinctrl-names = "default";
		pinctrl-0 = <&state_default>;

		state_default: pinmux {
			sdmmc1_clk_pz0 {
				nvidia,pins = "sdmmc1_clk_pz0";
				nvidia,function = "sdmmc1";
				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
				nvidia,tristate = <TEGRA_PIN_DISABLE>;
			};
			sdmmc1_cmd_pz1 {
				nvidia,pins =	"sdmmc1_cmd_pz1",
						"sdmmc1_dat0_py7",
						"sdmmc1_dat1_py6",
						"sdmmc1_dat2_py5",
						"sdmmc1_dat3_py4";
				nvidia,function = "sdmmc1";
				nvidia,pull = <TEGRA_PIN_PULL_UP>;
				nvidia,tristate = <TEGRA_PIN_DISABLE>;
			};
			sdmmc3_clk_pa6 {
				nvidia,pins = "sdmmc3_clk_pa6";
				nvidia,function = "sdmmc3";
				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
				nvidia,tristate = <TEGRA_PIN_DISABLE>;
			};
			sdmmc3_cmd_pa7 {
				nvidia,pins =	"sdmmc3_cmd_pa7",
						"sdmmc3_dat0_pb7",
						"sdmmc3_dat1_pb6",
						"sdmmc3_dat2_pb5",
						"sdmmc3_dat3_pb4";
				nvidia,function = "sdmmc3";
				nvidia,pull = <TEGRA_PIN_PULL_UP>;
				nvidia,tristate = <TEGRA_PIN_DISABLE>;
			};
			sdmmc4_clk_pcc4 {
				nvidia,pins =	"sdmmc4_clk_pcc4",
						"sdmmc4_rst_n_pcc3";
				nvidia,function = "sdmmc4";
				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
				nvidia,tristate = <TEGRA_PIN_DISABLE>;
			};
			sdmmc4_dat0_paa0 {
				nvidia,pins =	"sdmmc4_dat0_paa0",
						"sdmmc4_dat1_paa1",
						"sdmmc4_dat2_paa2",
						"sdmmc4_dat3_paa3",
						"sdmmc4_dat4_paa4",
						"sdmmc4_dat5_paa5",
						"sdmmc4_dat6_paa6",
						"sdmmc4_dat7_paa7";
				nvidia,function = "sdmmc4";
				nvidia,pull = <TEGRA_PIN_PULL_UP>;
				nvidia,tristate = <TEGRA_PIN_DISABLE>;
			};
			dap2_fs_pa2 {
				nvidia,pins =	"dap2_fs_pa2",
						"dap2_sclk_pa3",
						"dap2_din_pa4",
						"dap2_dout_pa5";
				nvidia,function = "i2s1";
				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
				nvidia,tristate = <TEGRA_PIN_DISABLE>;
			};
			sdio3 {
				nvidia,pins = "drive_sdio3";
				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
				nvidia,pull-down-strength = <46>;
				nvidia,pull-up-strength = <42>;
				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>;
				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>;
			};
			uart3_txd_pw6 {
				nvidia,pins =	"uart3_txd_pw6",
						"uart3_cts_n_pa1",
						"uart3_rts_n_pc0",
						"uart3_rxd_pw7";
				nvidia,function = "uartc";
				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
				nvidia,tristate = <TEGRA_PIN_DISABLE>;
			};
		};
	};

	serial@70006000 {
		status = "okay";
	};

	serial@70006200 {
		compatible = "nvidia,tegra30-hsuart";
		status = "okay";
	};

	pwm@7000a000 {
		status = "okay";
	};

	panelddc: i2c@7000c000 {
		status = "okay";
		clock-frequency = <100000>;
	};

	i2c@7000c400 {
		status = "okay";
		clock-frequency = <100000>;
	};

	i2c@7000c500 {
		status = "okay";
		clock-frequency = <100000>;

		/* ALS and Proximity sensor */
		isl29028@44 {
			compatible = "isil,isl29028";
			reg = <0x44>;
			interrupt-parent = <&gpio>;
			interrupts = <TEGRA_GPIO(L, 0) IRQ_TYPE_LEVEL_HIGH>;
		};

		i2cmux@70 {
			compatible = "nxp,pca9546";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x70>;
			reset-gpio = <&gpio TEGRA_GPIO(BB, 0) GPIO_ACTIVE_LOW>;
		};
	};

	i2c@7000c700 {
		status = "okay";
		clock-frequency = <100000>;
	};

	i2c@7000d000 {
		status = "okay";
		clock-frequency = <100000>;

		wm8903: wm8903@1a {
			compatible = "wlf,wm8903";
			reg = <0x1a>;
			interrupt-parent = <&gpio>;
			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;

			gpio-controller;
			#gpio-cells = <2>;

			micdet-cfg = <0>;
			micdet-delay = <100>;
			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
		};

		pmic: tps65911@2d {
			compatible = "ti,tps65911";
			reg = <0x2d>;

			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
			#interrupt-cells = <2>;
			interrupt-controller;

			ti,system-power-controller;

			#gpio-cells = <2>;
			gpio-controller;

			vcc1-supply = <&vdd_ac_bat_reg>;
			vcc2-supply = <&vdd_ac_bat_reg>;
			vcc3-supply = <&vio_reg>;
			vcc4-supply = <&vdd_5v0_reg>;
			vcc5-supply = <&vdd_ac_bat_reg>;
			vcc6-supply = <&vdd2_reg>;
			vcc7-supply = <&vdd_ac_bat_reg>;
			vccio-supply = <&vdd_ac_bat_reg>;

			regulators {
				vdd1_reg: vdd1 {
					regulator-name = "vddio_ddr_1v2";
					regulator-min-microvolt = <1200000>;
					regulator-max-microvolt = <1200000>;
					regulator-always-on;
				};

				vdd2_reg: vdd2 {
					regulator-name = "vdd_1v5_gen";
					regulator-min-microvolt = <1500000>;
					regulator-max-microvolt = <1500000>;
					regulator-always-on;
				};

				vddctrl_reg: vddctrl {
					regulator-name = "vdd_cpu,vdd_sys";
					regulator-min-microvolt = <1000000>;
					regulator-max-microvolt = <1000000>;
					regulator-always-on;
				};

				vio_reg: vio {
					regulator-name = "vdd_1v8_gen";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
					regulator-always-on;
				};

				ldo1_reg: ldo1 {
					regulator-name = "vdd_pexa,vdd_pexb";
					regulator-min-microvolt = <1050000>;
					regulator-max-microvolt = <1050000>;
				};

				ldo2_reg: ldo2 {
					regulator-name = "vdd_sata,avdd_plle";
					regulator-min-microvolt = <1050000>;
					regulator-max-microvolt = <1050000>;
				};

				/* LDO3 is not connected to anything */

				ldo4_reg: ldo4 {
					regulator-name = "vdd_rtc";
					regulator-min-microvolt = <1200000>;
					regulator-max-microvolt = <1200000>;
					regulator-always-on;
				};

				ldo5_reg: ldo5 {
					regulator-name = "vddio_sdmmc,avdd_vdac";
					regulator-min-microvolt = <3300000>;
					regulator-max-microvolt = <3300000>;
					regulator-always-on;
				};

				ldo6_reg: ldo6 {
					regulator-name = "avdd_dsi_csi,pwrdet_mipi";
					regulator-min-microvolt = <1200000>;
					regulator-max-microvolt = <1200000>;
				};

				ldo7_reg: ldo7 {
					regulator-name = "vdd_pllm,x,u,a_p_c_s";
					regulator-min-microvolt = <1200000>;
					regulator-max-microvolt = <1200000>;
					regulator-always-on;
				};

				ldo8_reg: ldo8 {
					regulator-name = "vdd_ddr_hs";
					regulator-min-microvolt = <1000000>;
					regulator-max-microvolt = <1000000>;
					regulator-always-on;
				};
			};
		};

		temperature-sensor@4c {
			compatible = "onnn,nct1008";
			reg = <0x4c>;
			vcc-supply = <&sys_3v3_reg>;
			interrupt-parent = <&gpio>;
			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>;
		};

		tps62361@60 {
			compatible = "ti,tps62361";
			reg = <0x60>;

			regulator-name = "tps62361-vout";
			regulator-min-microvolt = <500000>;
			regulator-max-microvolt = <1500000>;
			regulator-boot-on;
			regulator-always-on;
			ti,vsel0-state-high;
			ti,vsel1-state-high;
		};
	};

	spi@7000da00 {
		status = "okay";
		spi-max-frequency = <25000000>;
		spi-flash@1 {
			compatible = "winbond,w25q32", "jedec,spi-nor";
			reg = <1>;
			spi-max-frequency = <20000000>;
		};
	};

	pmc@7000e400 {
		status = "okay";
		nvidia,invert-interrupt;
		nvidia,suspend-mode = <1>;
		nvidia,cpu-pwr-good-time = <2000>;
		nvidia,cpu-pwr-off-time = <200>;
		nvidia,core-pwr-good-time = <3845 3845>;
		nvidia,core-pwr-off-time = <0>;
		nvidia,core-power-req-active-high;
		nvidia,sys-clock-req-active-high;
	};

	ahub@70080000 {
		i2s@70080400 {
			status = "okay";
		};
	};

	mmc@78000000 {
		status = "okay";
		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
		wp-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
		power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>;
		bus-width = <4>;
	};

	mmc@78000600 {
		status = "okay";
		bus-width = <8>;
		non-removable;
	};

	usb@7d008000 {
		status = "okay";
	};

	usb-phy@7d008000 {
		vbus-supply = <&usb3_vbus_reg>;
		status = "okay";
	};

	backlight: backlight {
		compatible = "pwm-backlight";

		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
		power-supply = <&vdd_bl_reg>;
		pwms = <&pwm 0 5000000>;

		brightness-levels = <0 4 8 16 32 64 128 255>;
		default-brightness-level = <6>;
	};

	clk32k_in: clock@0 {
		compatible = "fixed-clock";
		clock-frequency = <32768>;
		#clock-cells = <0>;
	};

	panel: panel {
		compatible = "chunghwa,claa101wb01";
		ddc-i2c-bus = <&panelddc>;

		power-supply = <&vdd_pnl1_reg>;
		enable-gpios = <&gpio TEGRA_GPIO(L, 2) GPIO_ACTIVE_HIGH>;

		backlight = <&backlight>;
	};

	vdd_ac_bat_reg: regulator@0 {
		compatible = "regulator-fixed";
		regulator-name = "vdd_ac_bat";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		regulator-always-on;
	};

	cam_1v8_reg: regulator@1 {
		compatible = "regulator-fixed";
		regulator-name = "cam_1v8";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		enable-active-high;
		gpio = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>;
		vin-supply = <&vio_reg>;
	};

	cp_5v_reg: regulator@2 {
		compatible = "regulator-fixed";
		regulator-name = "cp_5v";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		regulator-boot-on;
		regulator-always-on;
		enable-active-high;
		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
	};

	emmc_3v3_reg: regulator@3 {
		compatible = "regulator-fixed";
		regulator-name = "emmc_3v3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-always-on;
		regulator-boot-on;
		enable-active-high;
		gpio = <&gpio TEGRA_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
		vin-supply = <&sys_3v3_reg>;
	};

	modem_3v3_reg: regulator@4 {
		compatible = "regulator-fixed";
		regulator-name = "modem_3v3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		enable-active-high;
		gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
	};

	pex_hvdd_3v3_reg: regulator@5 {
		compatible = "regulator-fixed";
		regulator-name = "pex_hvdd_3v3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		enable-active-high;
		gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
		vin-supply = <&sys_3v3_reg>;
	};

	vdd_cam1_ldo_reg: regulator@6 {
		compatible = "regulator-fixed";
		regulator-name = "vdd_cam1_ldo";
		regulator-min-microvolt = <2800000>;
		regulator-max-microvolt = <2800000>;
		enable-active-high;
		gpio = <&gpio TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
		vin-supply = <&sys_3v3_reg>;
	};

	vdd_cam2_ldo_reg: regulator@7 {
		compatible = "regulator-fixed";
		regulator-name = "vdd_cam2_ldo";
		regulator-min-microvolt = <2800000>;
		regulator-max-microvolt = <2800000>;
		enable-active-high;
		gpio = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
		vin-supply = <&sys_3v3_reg>;
	};

	vdd_cam3_ldo_reg: regulator@8 {
		compatible = "regulator-fixed";
		regulator-name = "vdd_cam3_ldo";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		enable-active-high;
		gpio = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>;
		vin-supply = <&sys_3v3_reg>;
	};

	vdd_com_reg: regulator@9 {
		compatible = "regulator-fixed";
		regulator-name = "vdd_com";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-always-on;
		regulator-boot-on;
		enable-active-high;
		gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
		vin-supply = <&sys_3v3_reg>;
	};

	vdd_fuse_3v3_reg: regulator@10 {
		compatible = "regulator-fixed";
		regulator-name = "vdd_fuse_3v3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		enable-active-high;
		gpio = <&gpio TEGRA_GPIO(L, 6) GPIO_ACTIVE_HIGH>;
		vin-supply = <&sys_3v3_reg>;
	};

	vdd_pnl1_reg: regulator@11 {
		compatible = "regulator-fixed";
		regulator-name = "vdd_pnl1";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-always-on;
		regulator-boot-on;
		enable-active-high;
		gpio = <&gpio TEGRA_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
		vin-supply = <&sys_3v3_reg>;
	};

	vdd_vid_reg: regulator@12 {
		compatible = "regulator-fixed";
		regulator-name = "vddio_vid";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		enable-active-high;
		gpio = <&gpio TEGRA_GPIO(T, 0) GPIO_ACTIVE_HIGH>;
		gpio-open-drain;
		vin-supply = <&vdd_5v0_reg>;
	};

	sound {
		compatible = "nvidia,tegra-audio-wm8903-cardhu",
			     "nvidia,tegra-audio-wm8903";
		nvidia,model = "NVIDIA Tegra Cardhu";

		nvidia,audio-routing =
			"Headphone Jack", "HPOUTR",
			"Headphone Jack", "HPOUTL",
			"Int Spk", "ROP",
			"Int Spk", "RON",
			"Int Spk", "LOP",
			"Int Spk", "LON",
			"Mic Jack", "MICBIAS",
			"IN1L", "Mic Jack";

		nvidia,i2s-controller = <&tegra_i2s1>;
		nvidia,audio-codec = <&wm8903>;

		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
			GPIO_ACTIVE_HIGH>;

		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
		clock-names = "pll_a", "pll_a_out0", "mclk";

		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;

		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
					 <&tegra_car TEGRA30_CLK_EXTERN1>;
	};

	gpio-keys {
		compatible = "gpio-keys";

		power {
			label = "Power";
			interrupt-parent = <&pmic>;
			interrupts = <2 0>;
			linux,code = <KEY_POWER>;
			debounce-interval = <100>;
			wakeup-source;
		};

		volume-down {
			label = "Volume Down";
			gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_LOW>;
			linux,code = <KEY_VOLUMEDOWN>;
			debounce-interval = <10>;
		};

		volume-up {
			label = "Volume Up";
			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
			linux,code = <KEY_VOLUMEUP>;
			debounce-interval = <10>;
		};
	};
};