powerpc/mpic: add the mpic global timer support
Add support for MPIC timers as requestable interrupt sources.
Based on http://patchwork.ozlabs.org/patch/20941/ by Dave Liu.
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 0a3c1c2..0e47bce5 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -219,6 +219,28 @@
_mpic_write(mpic->reg_type, &mpic->gregs, offset, value);
}
+static inline u32 _mpic_tm_read(struct mpic *mpic, unsigned int tm)
+{
+ unsigned int offset = MPIC_INFO(TIMER_VECTOR_PRI) +
+ ((tm & 3) * MPIC_INFO(TIMER_STRIDE));
+
+ if (tm >= 4)
+ offset += 0x1000 / 4;
+
+ return _mpic_read(mpic->reg_type, &mpic->tmregs, offset);
+}
+
+static inline void _mpic_tm_write(struct mpic *mpic, unsigned int tm, u32 value)
+{
+ unsigned int offset = MPIC_INFO(TIMER_VECTOR_PRI) +
+ ((tm & 3) * MPIC_INFO(TIMER_STRIDE));
+
+ if (tm >= 4)
+ offset += 0x1000 / 4;
+
+ _mpic_write(mpic->reg_type, &mpic->tmregs, offset, value);
+}
+
static inline u32 _mpic_cpu_read(struct mpic *mpic, unsigned int reg)
{
unsigned int cpu = mpic_processor_id(mpic);
@@ -269,6 +291,8 @@
#define mpic_write(b,r,v) _mpic_write(mpic->reg_type,&(b),(r),(v))
#define mpic_ipi_read(i) _mpic_ipi_read(mpic,(i))
#define mpic_ipi_write(i,v) _mpic_ipi_write(mpic,(i),(v))
+#define mpic_tm_read(i) _mpic_tm_read(mpic,(i))
+#define mpic_tm_write(i,v) _mpic_tm_write(mpic,(i),(v))
#define mpic_cpu_read(i) _mpic_cpu_read(mpic,(i))
#define mpic_cpu_write(i,v) _mpic_cpu_write(mpic,(i),(v))
#define mpic_irq_read(s,r) _mpic_irq_read(mpic,(s),(r))
@@ -625,6 +649,13 @@
return (src >= mpic->ipi_vecs[0] && src <= mpic->ipi_vecs[3]);
}
+/* Determine if the linux irq is a timer */
+static unsigned int mpic_is_tm(struct mpic *mpic, unsigned int irq)
+{
+ unsigned int src = virq_to_hw(irq);
+
+ return (src >= mpic->timer_vecs[0] && src <= mpic->timer_vecs[7]);
+}
/* Convert a cpu mask from logical to physical cpu numbers. */
static inline u32 mpic_physmask(u32 cpumask)
@@ -811,6 +842,25 @@
#endif /* CONFIG_SMP */
+static void mpic_unmask_tm(struct irq_data *d)
+{
+ struct mpic *mpic = mpic_from_irq_data(d);
+ unsigned int src = virq_to_hw(d->irq) - mpic->timer_vecs[0];
+
+ DBG("%s: enable_tm: %d (tm %d)\n", mpic->name, irq, src);
+ mpic_tm_write(src, mpic_tm_read(src) & ~MPIC_VECPRI_MASK);
+ mpic_tm_read(src);
+}
+
+static void mpic_mask_tm(struct irq_data *d)
+{
+ struct mpic *mpic = mpic_from_irq_data(d);
+ unsigned int src = virq_to_hw(d->irq) - mpic->timer_vecs[0];
+
+ mpic_tm_write(src, mpic_tm_read(src) | MPIC_VECPRI_MASK);
+ mpic_tm_read(src);
+}
+
int mpic_set_affinity(struct irq_data *d, const struct cpumask *cpumask,
bool force)
{
@@ -941,6 +991,12 @@
};
#endif /* CONFIG_SMP */
+static struct irq_chip mpic_tm_chip = {
+ .irq_mask = mpic_mask_tm,
+ .irq_unmask = mpic_unmask_tm,
+ .irq_eoi = mpic_end_irq,
+};
+
#ifdef CONFIG_MPIC_U3_HT_IRQS
static struct irq_chip mpic_irq_ht_chip = {
.irq_startup = mpic_startup_ht_irq,
@@ -984,6 +1040,16 @@
}
#endif /* CONFIG_SMP */
+ if (hw >= mpic->timer_vecs[0] && hw <= mpic->timer_vecs[7]) {
+ WARN_ON(!(mpic->flags & MPIC_PRIMARY));
+
+ DBG("mpic: mapping as timer\n");
+ irq_set_chip_data(virq, mpic);
+ irq_set_chip_and_handler(virq, &mpic->hc_tm,
+ handle_fasteoi_irq);
+ return 0;
+ }
+
if (hw >= mpic->irq_count)
return -EINVAL;
@@ -1140,6 +1206,9 @@
mpic->hc_ipi.name = name;
#endif /* CONFIG_SMP */
+ mpic->hc_tm = mpic_tm_chip;
+ mpic->hc_tm.name = name;
+
mpic->flags = flags;
mpic->isu_size = isu_size;
mpic->irq_count = irq_count;
@@ -1150,10 +1219,14 @@
else
intvec_top = 255;
- mpic->timer_vecs[0] = intvec_top - 8;
- mpic->timer_vecs[1] = intvec_top - 7;
- mpic->timer_vecs[2] = intvec_top - 6;
- mpic->timer_vecs[3] = intvec_top - 5;
+ mpic->timer_vecs[0] = intvec_top - 12;
+ mpic->timer_vecs[1] = intvec_top - 11;
+ mpic->timer_vecs[2] = intvec_top - 10;
+ mpic->timer_vecs[3] = intvec_top - 9;
+ mpic->timer_vecs[4] = intvec_top - 8;
+ mpic->timer_vecs[5] = intvec_top - 7;
+ mpic->timer_vecs[6] = intvec_top - 6;
+ mpic->timer_vecs[7] = intvec_top - 5;
mpic->ipi_vecs[0] = intvec_top - 4;
mpic->ipi_vecs[1] = intvec_top - 3;
mpic->ipi_vecs[2] = intvec_top - 2;
@@ -1356,15 +1429,17 @@
/* Set current processor priority to max */
mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0xf);
- /* Initialize timers: just disable them all */
+ /* Initialize timers to our reserved vectors and mask them for now */
for (i = 0; i < 4; i++) {
mpic_write(mpic->tmregs,
i * MPIC_INFO(TIMER_STRIDE) +
- MPIC_INFO(TIMER_DESTINATION), 0);
+ MPIC_INFO(TIMER_DESTINATION),
+ 1 << hard_smp_processor_id());
mpic_write(mpic->tmregs,
i * MPIC_INFO(TIMER_STRIDE) +
MPIC_INFO(TIMER_VECTOR_PRI),
MPIC_VECPRI_MASK |
+ (9 << MPIC_VECPRI_PRIORITY_SHIFT) |
(mpic->timer_vecs[0] + i));
}
@@ -1473,6 +1548,11 @@
~MPIC_VECPRI_PRIORITY_MASK;
mpic_ipi_write(src - mpic->ipi_vecs[0],
reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT));
+ } else if (mpic_is_tm(mpic, irq)) {
+ reg = mpic_tm_read(src - mpic->timer_vecs[0]) &
+ ~MPIC_VECPRI_PRIORITY_MASK;
+ mpic_tm_write(src - mpic->timer_vecs[0],
+ reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT));
} else {
reg = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI))
& ~MPIC_VECPRI_PRIORITY_MASK;
