diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 6ab0716..18b135f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -1332,6 +1332,9 @@
 
 	hw->wiphy->custom_regulatory = true;
 
+	/* Firmware does not support this */
+	hw->wiphy->disable_beacon_hints = true;
+
 	hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
 	/* we create the 802.11 header and a zero-length SSID element */
 	hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index 11e08c0..ca00cc8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -308,18 +308,18 @@
 		return -ENODATA;
 	}
 
+	ptr = priv->eeprom;
+	if (!ptr) {
+		IWL_ERR(priv, "Invalid EEPROM/OTP memory\n");
+		return -ENOMEM;
+	}
+
 	/* 4 characters for byte 0xYY */
 	buf = kzalloc(buf_size, GFP_KERNEL);
 	if (!buf) {
 		IWL_ERR(priv, "Can not allocate Buffer\n");
 		return -ENOMEM;
 	}
-
-	ptr = priv->eeprom;
-	if (!ptr) {
-		IWL_ERR(priv, "Invalid EEPROM/OTP memory\n");
-		return -ENOMEM;
-	}
 	pos += scnprintf(buf + pos, buf_size - pos, "NVM Type: %s\n",
 			(priv->nvm_device_type == NVM_DEVICE_TYPE_OTP)
 			? "OTP" : "EEPROM");
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 2addf73..ffd5c61 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -566,6 +566,8 @@
 	unsigned long flags;
 
 	spin_lock_irqsave(&priv->sta_lock, flags);
+	IWL_DEBUG_WEP(priv, "Removing default WEP key: idx=%d\n",
+		      keyconf->keyidx);
 
 	if (!test_and_clear_bit(keyconf->keyidx, &priv->ucode_key_table))
 		IWL_ERR(priv, "index %d not used in uCode key table.\n",
@@ -573,6 +575,11 @@
 
 	priv->default_wep_key--;
 	memset(&priv->wep_keys[keyconf->keyidx], 0, sizeof(priv->wep_keys[0]));
+	if (iwl_is_rfkill(priv)) {
+		IWL_DEBUG_WEP(priv, "Not sending REPLY_WEPKEY command due to RFKILL.\n");
+		spin_unlock_irqrestore(&priv->sta_lock, flags);
+		return 0;
+	}
 	ret = iwl_send_static_wepkey_cmd(priv, 1);
 	IWL_DEBUG_WEP(priv, "Remove default WEP key: idx=%d ret=%d\n",
 		      keyconf->keyidx, ret);
@@ -853,6 +860,11 @@
 	priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
 	priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
 
+	if (iwl_is_rfkill(priv)) {
+		IWL_DEBUG_WEP(priv, "Not sending REPLY_ADD_STA command because RFKILL enabled. \n");
+		spin_unlock_irqrestore(&priv->sta_lock, flags);
+		return 0;
+	}
 	ret =  iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC);
 	spin_unlock_irqrestore(&priv->sta_lock, flags);
 	return ret;
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 2f50ab6..5238433 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -3968,6 +3968,9 @@
 
 	hw->wiphy->custom_regulatory = true;
 
+	/* Firmware does not support this */
+	hw->wiphy->disable_beacon_hints = true;
+
 	hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX_3945;
 	/* we create the 802.11 header and a zero-length SSID element */
 	hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;
diff --git a/drivers/net/wireless/iwmc3200wifi/commands.c b/drivers/net/wireless/iwmc3200wifi/commands.c
index 834a7f5..e2334d1 100644
--- a/drivers/net/wireless/iwmc3200wifi/commands.c
+++ b/drivers/net/wireless/iwmc3200wifi/commands.c
@@ -220,6 +220,7 @@
 	eeprom_rxiq = iwm_eeprom_access(iwm, IWM_EEPROM_CALIB_RXIQ);
 	if (IS_ERR(eeprom_rxiq)) {
 		IWM_ERR(iwm, "Couldn't access EEPROM RX IQ entry\n");
+		kfree(rxiq);
 		return PTR_ERR(eeprom_rxiq);
 	}
 
diff --git a/drivers/net/wireless/libertas/11d.c b/drivers/net/wireless/libertas/11d.c
index 9a5408e..5c69681 100644
--- a/drivers/net/wireless/libertas/11d.c
+++ b/drivers/net/wireless/libertas/11d.c
@@ -47,7 +47,7 @@
 {
 	u8 i;
 
-	for (i = 0; region[i] && i < COUNTRY_CODE_LEN; i++)
+	for (i = 0; i < COUNTRY_CODE_LEN && region[i]; i++)
 		region[i] = toupper(region[i]);
 
 	for (i = 0; i < ARRAY_SIZE(region_code_mapping); i++) {
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 40b07b9..3bd3c77 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -698,7 +698,7 @@
 			&& !mac->pass_ctrl)
 		return 0;
 
-	fc = *(__le16 *)buffer;
+	fc = get_unaligned((__le16*)buffer);
 	need_padding = ieee80211_is_data_qos(fc) ^ ieee80211_has_a4(fc);
 
 	skb = dev_alloc_skb(length + (need_padding ? 2 : 0));
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 1a21895..d1892d6 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -979,6 +979,10 @@
  * 	channels at a later time. This can be used for devices which do not
  * 	have calibration information gauranteed for frequencies or settings
  * 	outside of its regulatory domain.
+ * @disable_beacon_hints: enable this if your driver needs to ensure that
+ *	passive scan flags and beaconing flags may not be lifted by cfg80211
+ *	due to regulatory beacon hints. For more information on beacon
+ *	hints read the documenation for regulatory_hint_found_beacon()
  * @reg_notifier: the driver's regulatory notification callback
  * @regd: the driver's regulatory domain, if one was requested via
  * 	the regulatory_hint() API. This can be used by the driver
@@ -1004,6 +1008,7 @@
 
 	bool custom_regulatory;
 	bool strict_regulatory;
+	bool disable_beacon_hints;
 
 	enum cfg80211_signal_type signal_type;
 
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 5e14371..75a406d 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -1089,17 +1089,18 @@
 
 	chan->beacon_found = true;
 
+	if (wiphy->disable_beacon_hints)
+		return;
+
 	chan_before.center_freq = chan->center_freq;
 	chan_before.flags = chan->flags;
 
-	if ((chan->flags & IEEE80211_CHAN_PASSIVE_SCAN) &&
-	    !(chan->orig_flags & IEEE80211_CHAN_PASSIVE_SCAN)) {
+	if (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN) {
 		chan->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN;
 		channel_changed = true;
 	}
 
-	if ((chan->flags & IEEE80211_CHAN_NO_IBSS) &&
-	    !(chan->orig_flags & IEEE80211_CHAN_NO_IBSS)) {
+	if (chan->flags & IEEE80211_CHAN_NO_IBSS) {
 		chan->flags &= ~IEEE80211_CHAN_NO_IBSS;
 		channel_changed = true;
 	}
diff --git a/net/wireless/reg.h b/net/wireless/reg.h
index e37829a..4e167a8 100644
--- a/net/wireless/reg.h
+++ b/net/wireless/reg.h
@@ -30,7 +30,8 @@
  * non-radar 5 GHz channels.
  *
  * Drivers do not need to call this, cfg80211 will do it for after a scan
- * on a newly found BSS.
+ * on a newly found BSS. If you cannot make use of this feature you can
+ * set the wiphy->disable_beacon_hints to true.
  */
 int regulatory_hint_found_beacon(struct wiphy *wiphy,
 					struct ieee80211_channel *beacon_chan,
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 9271118..7e595ce 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -118,7 +118,7 @@
 
 	if (!ie1 && !ie2)
 		return 0;
-	if (!ie1)
+	if (!ie1 || !ie2)
 		return -1;
 
 	r = memcmp(ie1 + 2, ie2 + 2, min(ie1[1], ie2[1]));
@@ -171,6 +171,8 @@
 	ie = find_ie(WLAN_EID_MESH_CONFIG,
 		     a->information_elements,
 		     a->len_information_elements);
+	if (!ie)
+		return false;
 	if (ie[1] != IEEE80211_MESH_CONFIG_LEN)
 		return false;