diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index b74efa4..a03de3f7 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -967,6 +967,17 @@
 	  You need to select the mfd cell drivers separately.
 	  The drivers do not support all features the board exposes.
 
+config MFD_NTXEC
+	tristate "Netronix embedded controller (EC)"
+	depends on OF || COMPILE_TEST
+	depends on I2C
+	select REGMAP_I2C
+	select MFD_CORE
+	help
+	  Say yes here if you want to support the embedded controller found in
+	  certain e-book readers designed by the original design manufacturer
+	  Netronix.
+
 config MFD_RETU
 	tristate "Nokia Retu and Tahvo multi-function device"
 	select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 834f546..bb5e8f2 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -218,6 +218,7 @@
 obj-$(CONFIG_MFD_INTEL_PMT)	+= intel_pmt.o
 obj-$(CONFIG_MFD_PALMAS)	+= palmas.o
 obj-$(CONFIG_MFD_VIPERBOARD)    += viperboard.o
+obj-$(CONFIG_MFD_NTXEC)		+= ntxec.o
 obj-$(CONFIG_MFD_RC5T583)	+= rc5t583.o rc5t583-irq.o
 obj-$(CONFIG_MFD_RK808)		+= rk808.o
 obj-$(CONFIG_MFD_RN5T618)	+= rn5t618.o
diff --git a/drivers/mfd/ntxec.c b/drivers/mfd/ntxec.c
new file mode 100644
index 0000000..957de2b
--- /dev/null
+++ b/drivers/mfd/ntxec.c
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * The Netronix embedded controller is a microcontroller found in some
+ * e-book readers designed by the original design manufacturer Netronix, Inc.
+ * It contains RTC, battery monitoring, system power management, and PWM
+ * functionality.
+ *
+ * This driver implements register access, version detection, and system
+ * power-off/reset.
+ *
+ * Copyright 2020 Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+ */
+
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/ntxec.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+#include <asm/unaligned.h>
+
+#define NTXEC_REG_VERSION	0x00
+#define NTXEC_REG_POWEROFF	0x50
+#define NTXEC_REG_POWERKEEP	0x70
+#define NTXEC_REG_RESET		0x90
+
+#define NTXEC_POWEROFF_VALUE	0x0100
+#define NTXEC_POWERKEEP_VALUE	0x0800
+#define NTXEC_RESET_VALUE	0xff00
+
+static struct i2c_client *poweroff_restart_client;
+
+static void ntxec_poweroff(void)
+{
+	int res;
+	u8 buf[3] = { NTXEC_REG_POWEROFF };
+	struct i2c_msg msgs[] = {
+		{
+			.addr = poweroff_restart_client->addr,
+			.flags = 0,
+			.len = sizeof(buf),
+			.buf = buf,
+		},
+	};
+
+	put_unaligned_be16(NTXEC_POWEROFF_VALUE, buf + 1);
+
+	res = i2c_transfer(poweroff_restart_client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (res < 0)
+		dev_warn(&poweroff_restart_client->dev,
+			 "Failed to power off (err = %d)\n", res);
+
+	/*
+	 * The time from the register write until the host CPU is powered off
+	 * has been observed to be about 2.5 to 3 seconds. Sleep long enough to
+	 * safely avoid returning from the poweroff handler.
+	 */
+	msleep(5000);
+}
+
+static int ntxec_restart(struct notifier_block *nb,
+			 unsigned long action, void *data)
+{
+	int res;
+	u8 buf[3] = { NTXEC_REG_RESET };
+	/*
+	 * NOTE: The lower half of the reset value is not sent, because sending
+	 * it causes an I2C error. (The reset handler in the downstream driver
+	 * does send the full two-byte value, but doesn't check the result).
+	 */
+	struct i2c_msg msgs[] = {
+		{
+			.addr = poweroff_restart_client->addr,
+			.flags = 0,
+			.len = sizeof(buf) - 1,
+			.buf = buf,
+		},
+	};
+
+	put_unaligned_be16(NTXEC_RESET_VALUE, buf + 1);
+
+	res = i2c_transfer(poweroff_restart_client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (res < 0)
+		dev_warn(&poweroff_restart_client->dev,
+			 "Failed to restart (err = %d)\n", res);
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block ntxec_restart_handler = {
+	.notifier_call = ntxec_restart,
+	.priority = 128,
+};
+
+static const struct regmap_config regmap_config = {
+	.name = "ntxec",
+	.reg_bits = 8,
+	.val_bits = 16,
+	.cache_type = REGCACHE_NONE,
+	.val_format_endian = REGMAP_ENDIAN_BIG,
+};
+
+static const struct mfd_cell ntxec_subdevices[] = {
+	{ .name = "ntxec-rtc" },
+	{ .name = "ntxec-pwm" },
+};
+
+static int ntxec_probe(struct i2c_client *client)
+{
+	struct ntxec *ec;
+	unsigned int version;
+	int res;
+
+	ec = devm_kmalloc(&client->dev, sizeof(*ec), GFP_KERNEL);
+	if (!ec)
+		return -ENOMEM;
+
+	ec->dev = &client->dev;
+
+	ec->regmap = devm_regmap_init_i2c(client, &regmap_config);
+	if (IS_ERR(ec->regmap)) {
+		dev_err(ec->dev, "Failed to set up regmap for device\n");
+		return PTR_ERR(ec->regmap);
+	}
+
+	/* Determine the firmware version */
+	res = regmap_read(ec->regmap, NTXEC_REG_VERSION, &version);
+	if (res < 0) {
+		dev_err(ec->dev, "Failed to read firmware version number\n");
+		return res;
+	}
+
+	/* Bail out if we encounter an unknown firmware version */
+	switch (version) {
+	case NTXEC_VERSION_KOBO_AURA:
+		break;
+	default:
+		dev_err(ec->dev,
+			"Netronix embedded controller version %04x is not supported.\n",
+			version);
+		return -ENODEV;
+	}
+
+	dev_info(ec->dev,
+		 "Netronix embedded controller version %04x detected.\n", version);
+
+	if (of_device_is_system_power_controller(ec->dev->of_node)) {
+		/*
+		 * Set the 'powerkeep' bit. This is necessary on some boards
+		 * in order to keep the system running.
+		 */
+		res = regmap_write(ec->regmap, NTXEC_REG_POWERKEEP,
+				   NTXEC_POWERKEEP_VALUE);
+		if (res < 0)
+			return res;
+
+		if (poweroff_restart_client)
+			/*
+			 * Another instance of the driver already took
+			 * poweroff/restart duties.
+			 */
+			dev_err(ec->dev, "poweroff_restart_client already assigned\n");
+		else
+			poweroff_restart_client = client;
+
+		if (pm_power_off)
+			/* Another driver already registered a poweroff handler. */
+			dev_err(ec->dev, "pm_power_off already assigned\n");
+		else
+			pm_power_off = ntxec_poweroff;
+
+		res = register_restart_handler(&ntxec_restart_handler);
+		if (res)
+			dev_err(ec->dev,
+				"Failed to register restart handler: %d\n", res);
+	}
+
+	i2c_set_clientdata(client, ec);
+
+	res = devm_mfd_add_devices(ec->dev, PLATFORM_DEVID_NONE, ntxec_subdevices,
+				   ARRAY_SIZE(ntxec_subdevices), NULL, 0, NULL);
+	if (res)
+		dev_err(ec->dev, "Failed to add subdevices: %d\n", res);
+
+	return res;
+}
+
+static int ntxec_remove(struct i2c_client *client)
+{
+	if (client == poweroff_restart_client) {
+		poweroff_restart_client = NULL;
+		pm_power_off = NULL;
+		unregister_restart_handler(&ntxec_restart_handler);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id of_ntxec_match_table[] = {
+	{ .compatible = "netronix,ntxec", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, of_ntxec_match_table);
+
+static struct i2c_driver ntxec_driver = {
+	.driver = {
+		.name = "ntxec",
+		.of_match_table = of_ntxec_match_table,
+	},
+	.probe_new = ntxec_probe,
+	.remove = ntxec_remove,
+};
+module_i2c_driver(ntxec_driver);
+
+MODULE_AUTHOR("Jonathan Neuschäfer <j.neuschaefer@gmx.net>");
+MODULE_DESCRIPTION("Core driver for Netronix EC");
+MODULE_LICENSE("GPL");