/*
 * Device Tree Include file for Freescale Layerscape-1043A family SoC.
 *
 * Copyright 2014-2015 Freescale Semiconductor, Inc.
 *
 * Mingkai Hu <Mingkai.hu@freescale.com>
 *
 * This file is dual-licensed: you can use it either under the terms
 * of the GPLv2 or the X11 license, at your option. Note that this dual
 * licensing only applies to this file, and not this project as a
 * whole.
 *
 *  a) This library is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License as
 *     published by the Free Software Foundation; either version 2 of the
 *     License, or (at your option) any later version.
 *
 *     This library is distributed in the hope that it will be useful,
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *     GNU General Public License for more details.
 *
 * Or, alternatively,
 *
 *  b) Permission is hereby granted, free of charge, to any person
 *     obtaining a copy of this software and associated documentation
 *     files (the "Software"), to deal in the Software without
 *     restriction, including without limitation the rights to use,
 *     copy, modify, merge, publish, distribute, sublicense, and/or
 *     sell copies of the Software, and to permit persons to whom the
 *     Software is furnished to do so, subject to the following
 *     conditions:
 *
 *     The above copyright notice and this permission notice shall be
 *     included in all copies or substantial portions of the Software.
 *
 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 *     OTHER DEALINGS IN THE SOFTWARE.
 */

#include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>

/ {
	compatible = "fsl,ls1043a";
	interrupt-parent = <&gic>;
	#address-cells = <2>;
	#size-cells = <2>;

	aliases {
		fman0 = &fman0;
		ethernet0 = &enet0;
		ethernet1 = &enet1;
		ethernet2 = &enet2;
		ethernet3 = &enet3;
		ethernet4 = &enet4;
		ethernet5 = &enet5;
		ethernet6 = &enet6;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		/*
		 * We expect the enable-method for cpu's to be "psci", but this
		 * is dependent on the SoC FW, which will fill this in.
		 *
		 * Currently supported enable-method is psci v0.2
		 */
		cpu0: cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x0>;
			clocks = <&clockgen 1 0>;
			next-level-cache = <&l2>;
			#cooling-cells = <2>;
		};

		cpu1: cpu@1 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x1>;
			clocks = <&clockgen 1 0>;
			next-level-cache = <&l2>;
		};

		cpu2: cpu@2 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x2>;
			clocks = <&clockgen 1 0>;
			next-level-cache = <&l2>;
		};

		cpu3: cpu@3 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x3>;
			clocks = <&clockgen 1 0>;
			next-level-cache = <&l2>;
		};

		l2: l2-cache {
			compatible = "cache";
		};
	};

	memory@80000000 {
		device_type = "memory";
		reg = <0x0 0x80000000 0 0x80000000>;
		      /* DRAM space 1, size: 2GiB DRAM */
	};

	reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		bman_fbpr: bman-fbpr {
			compatible = "shared-dma-pool";
			size = <0 0x1000000>;
			alignment = <0 0x1000000>;
			no-map;
		};

		qman_fqd: qman-fqd {
			compatible = "shared-dma-pool";
			size = <0 0x400000>;
			alignment = <0 0x400000>;
			no-map;
		};

		qman_pfdr: qman-pfdr {
			compatible = "shared-dma-pool";
			size = <0 0x2000000>;
			alignment = <0 0x2000000>;
			no-map;
		};
	};

	sysclk: sysclk {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <100000000>;
		clock-output-names = "sysclk";
	};

	reboot {
		compatible ="syscon-reboot";
		regmap = <&dcfg>;
		offset = <0xb0>;
		mask = <0x02>;
	};

	timer {
		compatible = "arm,armv8-timer";
		interrupts = <1 13 0xf08>, /* Physical Secure PPI */
			     <1 14 0xf08>, /* Physical Non-Secure PPI */
			     <1 11 0xf08>, /* Virtual PPI */
			     <1 10 0xf08>; /* Hypervisor PPI */
		fsl,erratum-a008585;
	};

	pmu {
		compatible = "arm,armv8-pmuv3";
		interrupts = <0 106 0x4>,
			     <0 107 0x4>,
			     <0 95 0x4>,
			     <0 97 0x4>;
		interrupt-affinity = <&cpu0>,
				     <&cpu1>,
				     <&cpu2>,
				     <&cpu3>;
	};

	gic: interrupt-controller@1400000 {
		compatible = "arm,gic-400";
		#interrupt-cells = <3>;
		interrupt-controller;
		reg = <0x0 0x1401000 0 0x1000>, /* GICD */
		      <0x0 0x1402000 0 0x2000>, /* GICC */
		      <0x0 0x1404000 0 0x2000>, /* GICH */
		      <0x0 0x1406000 0 0x2000>; /* GICV */
		interrupts = <1 9 0xf08>;
	};

	soc: soc {
		compatible = "simple-bus";
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		clockgen: clocking@1ee1000 {
			compatible = "fsl,ls1043a-clockgen";
			reg = <0x0 0x1ee1000 0x0 0x1000>;
			#clock-cells = <2>;
			clocks = <&sysclk>;
		};

		scfg: scfg@1570000 {
			compatible = "fsl,ls1043a-scfg", "syscon";
			reg = <0x0 0x1570000 0x0 0x10000>;
			big-endian;
		};

		crypto: crypto@1700000 {
			compatible = "fsl,sec-v5.4", "fsl,sec-v5.0",
				     "fsl,sec-v4.0";
			fsl,sec-era = <3>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0x0 0x00 0x1700000 0x100000>;
			reg = <0x00 0x1700000 0x0 0x100000>;
			interrupts = <0 75 0x4>;

			sec_jr0: jr@10000 {
				compatible = "fsl,sec-v5.4-job-ring",
					     "fsl,sec-v5.0-job-ring",
					     "fsl,sec-v4.0-job-ring";
				reg	   = <0x10000 0x10000>;
				interrupts = <0 71 0x4>;
			};

			sec_jr1: jr@20000 {
				compatible = "fsl,sec-v5.4-job-ring",
					     "fsl,sec-v5.0-job-ring",
					     "fsl,sec-v4.0-job-ring";
				reg	   = <0x20000 0x10000>;
				interrupts = <0 72 0x4>;
			};

			sec_jr2: jr@30000 {
				compatible = "fsl,sec-v5.4-job-ring",
					     "fsl,sec-v5.0-job-ring",
					     "fsl,sec-v4.0-job-ring";
				reg	   = <0x30000 0x10000>;
				interrupts = <0 73 0x4>;
			};

			sec_jr3: jr@40000 {
				compatible = "fsl,sec-v5.4-job-ring",
					     "fsl,sec-v5.0-job-ring",
					     "fsl,sec-v4.0-job-ring";
				reg	   = <0x40000 0x10000>;
				interrupts = <0 74 0x4>;
			};
		};

		dcfg: dcfg@1ee0000 {
			compatible = "fsl,ls1043a-dcfg", "syscon";
			reg = <0x0 0x1ee0000 0x0 0x10000>;
			big-endian;
		};

		ifc: ifc@1530000 {
			compatible = "fsl,ifc", "simple-bus";
			reg = <0x0 0x1530000 0x0 0x10000>;
			big-endian;
			interrupts = <0 43 0x4>;
		};

		qspi: quadspi@1550000 {
			compatible = "fsl,ls1043a-qspi", "fsl,ls1021a-qspi";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x0 0x1550000 0x0 0x10000>,
				<0x0 0x40000000 0x0 0x4000000>;
			reg-names = "QuadSPI", "QuadSPI-memory";
			interrupts = <0 99 0x4>;
			clock-names = "qspi_en", "qspi";
			clocks = <&clockgen 4 0>, <&clockgen 4 0>;
			big-endian;
			status = "disabled";
		};

		esdhc: esdhc@1560000 {
			compatible = "fsl,ls1043a-esdhc", "fsl,esdhc";
			reg = <0x0 0x1560000 0x0 0x10000>;
			interrupts = <0 62 0x4>;
			clock-frequency = <0>;
			voltage-ranges = <1800 1800 3300 3300>;
			sdhci,auto-cmd12;
			big-endian;
			bus-width = <4>;
		};

		ddr: memory-controller@1080000 {
			compatible = "fsl,qoriq-memory-controller";
			reg = <0x0 0x1080000 0x0 0x1000>;
			interrupts = <0 144 0x4>;
			big-endian;
		};

		tmu: tmu@1f00000 {
			compatible = "fsl,qoriq-tmu";
			reg = <0x0 0x1f00000 0x0 0x10000>;
			interrupts = <0 33 0x4>;
			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
			fsl,tmu-calibration = <0x00000000 0x00000026
					       0x00000001 0x0000002d
					       0x00000002 0x00000032
					       0x00000003 0x00000039
					       0x00000004 0x0000003f
					       0x00000005 0x00000046
					       0x00000006 0x0000004d
					       0x00000007 0x00000054
					       0x00000008 0x0000005a
					       0x00000009 0x00000061
					       0x0000000a 0x0000006a
					       0x0000000b 0x00000071

					       0x00010000 0x00000025
					       0x00010001 0x0000002c
					       0x00010002 0x00000035
					       0x00010003 0x0000003d
					       0x00010004 0x00000045
					       0x00010005 0x0000004e
					       0x00010006 0x00000057
					       0x00010007 0x00000061
					       0x00010008 0x0000006b
					       0x00010009 0x00000076

					       0x00020000 0x00000029
					       0x00020001 0x00000033
					       0x00020002 0x0000003d
					       0x00020003 0x00000049
					       0x00020004 0x00000056
					       0x00020005 0x00000061
					       0x00020006 0x0000006d

					       0x00030000 0x00000021
					       0x00030001 0x0000002a
					       0x00030002 0x0000003c
					       0x00030003 0x0000004e>;
			#thermal-sensor-cells = <1>;
		};

		thermal-zones {
			cpu_thermal: cpu-thermal {
				polling-delay-passive = <1000>;
				polling-delay = <5000>;

				thermal-sensors = <&tmu 3>;

				trips {
					cpu_alert: cpu-alert {
						temperature = <85000>;
						hysteresis = <2000>;
						type = "passive";
					};
					cpu_crit: cpu-crit {
						temperature = <95000>;
						hysteresis = <2000>;
						type = "critical";
					};
				};

				cooling-maps {
					map0 {
						trip = <&cpu_alert>;
						cooling-device =
							<&cpu0 THERMAL_NO_LIMIT
							THERMAL_NO_LIMIT>;
					};
				};
			};
		};

		qman: qman@1880000 {
			compatible = "fsl,qman";
			reg = <0x0 0x1880000 0x0 0x10000>;
			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
			memory-region = <&qman_fqd &qman_pfdr>;
		};

		bman: bman@1890000 {
			compatible = "fsl,bman";
			reg = <0x0 0x1890000 0x0 0x10000>;
			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
			memory-region = <&bman_fbpr>;
		};

		bportals: bman-portals@508000000 {
			ranges = <0x0 0x5 0x08000000 0x8000000>;
		};

		qportals: qman-portals@500000000 {
			ranges = <0x0 0x5 0x00000000 0x8000000>;
		};

		dspi0: dspi@2100000 {
			compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x0 0x2100000 0x0 0x10000>;
			interrupts = <0 64 0x4>;
			clock-names = "dspi";
			clocks = <&clockgen 4 0>;
			spi-num-chipselects = <5>;
			big-endian;
			status = "disabled";
		};

		dspi1: dspi@2110000 {
			compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x0 0x2110000 0x0 0x10000>;
			interrupts = <0 65 0x4>;
			clock-names = "dspi";
			clocks = <&clockgen 4 0>;
			spi-num-chipselects = <5>;
			big-endian;
			status = "disabled";
		};

		i2c0: i2c@2180000 {
			compatible = "fsl,vf610-i2c";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x0 0x2180000 0x0 0x10000>;
			interrupts = <0 56 0x4>;
			clock-names = "i2c";
			clocks = <&clockgen 4 0>;
			dmas = <&edma0 1 39>,
			       <&edma0 1 38>;
			dma-names = "tx", "rx";
			status = "disabled";
		};

		i2c1: i2c@2190000 {
			compatible = "fsl,vf610-i2c";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x0 0x2190000 0x0 0x10000>;
			interrupts = <0 57 0x4>;
			clock-names = "i2c";
			clocks = <&clockgen 4 0>;
			status = "disabled";
		};

		i2c2: i2c@21a0000 {
			compatible = "fsl,vf610-i2c";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x0 0x21a0000 0x0 0x10000>;
			interrupts = <0 58 0x4>;
			clock-names = "i2c";
			clocks = <&clockgen 4 0>;
			status = "disabled";
		};

		i2c3: i2c@21b0000 {
			compatible = "fsl,vf610-i2c";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x0 0x21b0000 0x0 0x10000>;
			interrupts = <0 59 0x4>;
			clock-names = "i2c";
			clocks = <&clockgen 4 0>;
			status = "disabled";
		};

		duart0: serial@21c0500 {
			compatible = "fsl,ns16550", "ns16550a";
			reg = <0x00 0x21c0500 0x0 0x100>;
			interrupts = <0 54 0x4>;
			clocks = <&clockgen 4 0>;
		};

		duart1: serial@21c0600 {
			compatible = "fsl,ns16550", "ns16550a";
			reg = <0x00 0x21c0600 0x0 0x100>;
			interrupts = <0 54 0x4>;
			clocks = <&clockgen 4 0>;
		};

		duart2: serial@21d0500 {
			compatible = "fsl,ns16550", "ns16550a";
			reg = <0x0 0x21d0500 0x0 0x100>;
			interrupts = <0 55 0x4>;
			clocks = <&clockgen 4 0>;
		};

		duart3: serial@21d0600 {
			compatible = "fsl,ns16550", "ns16550a";
			reg = <0x0 0x21d0600 0x0 0x100>;
			interrupts = <0 55 0x4>;
			clocks = <&clockgen 4 0>;
		};

		gpio1: gpio@2300000 {
			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
			reg = <0x0 0x2300000 0x0 0x10000>;
			interrupts = <0 66 0x4>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpio2: gpio@2310000 {
			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
			reg = <0x0 0x2310000 0x0 0x10000>;
			interrupts = <0 67 0x4>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpio3: gpio@2320000 {
			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
			reg = <0x0 0x2320000 0x0 0x10000>;
			interrupts = <0 68 0x4>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpio4: gpio@2330000 {
			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
			reg = <0x0 0x2330000 0x0 0x10000>;
			interrupts = <0 134 0x4>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		lpuart0: serial@2950000 {
			compatible = "fsl,ls1021a-lpuart";
			reg = <0x0 0x2950000 0x0 0x1000>;
			interrupts = <0 48 0x4>;
			clocks = <&clockgen 0 0>;
			clock-names = "ipg";
			status = "disabled";
		};

		lpuart1: serial@2960000 {
			compatible = "fsl,ls1021a-lpuart";
			reg = <0x0 0x2960000 0x0 0x1000>;
			interrupts = <0 49 0x4>;
			clocks = <&clockgen 4 0>;
			clock-names = "ipg";
			status = "disabled";
		};

		lpuart2: serial@2970000 {
			compatible = "fsl,ls1021a-lpuart";
			reg = <0x0 0x2970000 0x0 0x1000>;
			interrupts = <0 50 0x4>;
			clocks = <&clockgen 4 0>;
			clock-names = "ipg";
			status = "disabled";
		};

		lpuart3: serial@2980000 {
			compatible = "fsl,ls1021a-lpuart";
			reg = <0x0 0x2980000 0x0 0x1000>;
			interrupts = <0 51 0x4>;
			clocks = <&clockgen 4 0>;
			clock-names = "ipg";
			status = "disabled";
		};

		lpuart4: serial@2990000 {
			compatible = "fsl,ls1021a-lpuart";
			reg = <0x0 0x2990000 0x0 0x1000>;
			interrupts = <0 52 0x4>;
			clocks = <&clockgen 4 0>;
			clock-names = "ipg";
			status = "disabled";
		};

		lpuart5: serial@29a0000 {
			compatible = "fsl,ls1021a-lpuart";
			reg = <0x0 0x29a0000 0x0 0x1000>;
			interrupts = <0 53 0x4>;
			clocks = <&clockgen 4 0>;
			clock-names = "ipg";
			status = "disabled";
		};

		wdog0: wdog@2ad0000 {
			compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt";
			reg = <0x0 0x2ad0000 0x0 0x10000>;
			interrupts = <0 83 0x4>;
			clocks = <&clockgen 4 0>;
			clock-names = "wdog";
			big-endian;
		};

		edma0: edma@2c00000 {
			#dma-cells = <2>;
			compatible = "fsl,vf610-edma";
			reg = <0x0 0x2c00000 0x0 0x10000>,
			      <0x0 0x2c10000 0x0 0x10000>,
			      <0x0 0x2c20000 0x0 0x10000>;
			interrupts = <0 103 0x4>,
				     <0 103 0x4>;
			interrupt-names = "edma-tx", "edma-err";
			dma-channels = <32>;
			big-endian;
			clock-names = "dmamux0", "dmamux1";
			clocks = <&clockgen 4 0>,
				 <&clockgen 4 0>;
		};

		usb0: usb3@2f00000 {
			compatible = "snps,dwc3";
			reg = <0x0 0x2f00000 0x0 0x10000>;
			interrupts = <0 60 0x4>;
			dr_mode = "host";
			snps,quirk-frame-length-adjustment = <0x20>;
			snps,dis_rxdet_inp3_quirk;
		};

		usb1: usb3@3000000 {
			compatible = "snps,dwc3";
			reg = <0x0 0x3000000 0x0 0x10000>;
			interrupts = <0 61 0x4>;
			dr_mode = "host";
			snps,quirk-frame-length-adjustment = <0x20>;
			snps,dis_rxdet_inp3_quirk;
		};

		usb2: usb3@3100000 {
			compatible = "snps,dwc3";
			reg = <0x0 0x3100000 0x0 0x10000>;
			interrupts = <0 63 0x4>;
			dr_mode = "host";
			snps,quirk-frame-length-adjustment = <0x20>;
			snps,dis_rxdet_inp3_quirk;
		};

		sata: sata@3200000 {
			compatible = "fsl,ls1043a-ahci";
			reg = <0x0 0x3200000 0x0 0x10000>,
				<0x0 0x20140520 0x0 0x4>;
			reg-names = "ahci", "sata-ecc";
			interrupts = <0 69 0x4>;
			clocks = <&clockgen 4 0>;
			dma-coherent;
		};

		msi1: msi-controller1@1571000 {
			compatible = "fsl,ls1043a-msi";
			reg = <0x0 0x1571000 0x0 0x8>;
			msi-controller;
			interrupts = <0 116 0x4>;
		};

		msi2: msi-controller2@1572000 {
			compatible = "fsl,ls1043a-msi";
			reg = <0x0 0x1572000 0x0 0x8>;
			msi-controller;
			interrupts = <0 126 0x4>;
		};

		msi3: msi-controller3@1573000 {
			compatible = "fsl,ls1043a-msi";
			reg = <0x0 0x1573000 0x0 0x8>;
			msi-controller;
			interrupts = <0 160 0x4>;
		};

		pcie@3400000 {
			compatible = "fsl,ls1043a-pcie", "snps,dw-pcie";
			reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
			       0x40 0x00000000 0x0 0x00002000>; /* configuration space */
			reg-names = "regs", "config";
			interrupts = <0 118 0x4>, /* controller interrupt */
				     <0 117 0x4>; /* PME interrupt */
			interrupt-names = "intr", "pme";
			#address-cells = <3>;
			#size-cells = <2>;
			device_type = "pci";
			dma-coherent;
			num-lanes = <4>;
			bus-range = <0x0 0xff>;
			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
				  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
			msi-parent = <&msi1>, <&msi2>, <&msi3>;
			#interrupt-cells = <1>;
			interrupt-map-mask = <0 0 0 7>;
			interrupt-map = <0000 0 0 1 &gic 0 110 0x4>,
					<0000 0 0 2 &gic 0 111 0x4>,
					<0000 0 0 3 &gic 0 112 0x4>,
					<0000 0 0 4 &gic 0 113 0x4>;
		};

		pcie@3500000 {
			compatible = "fsl,ls1043a-pcie", "snps,dw-pcie";
			reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
			       0x48 0x00000000 0x0 0x00002000>; /* configuration space */
			reg-names = "regs", "config";
			interrupts = <0 128 0x4>,
				     <0 127 0x4>;
			interrupt-names = "intr", "pme";
			#address-cells = <3>;
			#size-cells = <2>;
			device_type = "pci";
			dma-coherent;
			num-lanes = <2>;
			bus-range = <0x0 0xff>;
			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
				  0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
			msi-parent = <&msi1>, <&msi2>, <&msi3>;
			#interrupt-cells = <1>;
			interrupt-map-mask = <0 0 0 7>;
			interrupt-map = <0000 0 0 1 &gic 0 120  0x4>,
					<0000 0 0 2 &gic 0 121 0x4>,
					<0000 0 0 3 &gic 0 122 0x4>,
					<0000 0 0 4 &gic 0 123 0x4>;
		};

		pcie@3600000 {
			compatible = "fsl,ls1043a-pcie", "snps,dw-pcie";
			reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
			       0x50 0x00000000 0x0 0x00002000>; /* configuration space */
			reg-names = "regs", "config";
			interrupts = <0 162 0x4>,
				     <0 161 0x4>;
			interrupt-names = "intr", "pme";
			#address-cells = <3>;
			#size-cells = <2>;
			device_type = "pci";
			dma-coherent;
			num-lanes = <2>;
			bus-range = <0x0 0xff>;
			ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000   /* downstream I/O */
				  0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
			msi-parent = <&msi1>, <&msi2>, <&msi3>;
			#interrupt-cells = <1>;
			interrupt-map-mask = <0 0 0 7>;
			interrupt-map = <0000 0 0 1 &gic 0 154 0x4>,
					<0000 0 0 2 &gic 0 155 0x4>,
					<0000 0 0 3 &gic 0 156 0x4>,
					<0000 0 0 4 &gic 0 157 0x4>;
		};
	};

	firmware {
		optee {
			compatible = "linaro,optee-tz";
			method = "smc";
		};
	};

};

#include "qoriq-qman-portals.dtsi"
#include "qoriq-bman-portals.dtsi"