| // SPDX-License-Identifier: GPL-2.0-or-later |
| /************************************************************************** |
| * Initio 9100 device driver for Linux. |
| * |
| * Copyright (c) 1994-1998 Initio Corporation |
| * Copyright (c) 1998 Bas Vermeulen <bvermeul@blackstar.xs4all.nl> |
| * Copyright (c) 2004 Christoph Hellwig <hch@lst.de> |
| * Copyright (c) 2007 Red Hat |
| * |
| ************************************************************************* |
| * |
| * DESCRIPTION: |
| * |
| * This is the Linux low-level SCSI driver for Initio INI-9X00U/UW SCSI host |
| * adapters |
| * |
| * 08/06/97 hc - v1.01h |
| * - Support inic-940 and inic-935 |
| * 09/26/97 hc - v1.01i |
| * - Make correction from J.W. Schultz suggestion |
| * 10/13/97 hc - Support reset function |
| * 10/21/97 hc - v1.01j |
| * - Support 32 LUN (SCSI 3) |
| * 01/14/98 hc - v1.01k |
| * - Fix memory allocation problem |
| * 03/04/98 hc - v1.01l |
| * - Fix tape rewind which will hang the system problem |
| * - Set can_queue to initio_num_scb |
| * 06/25/98 hc - v1.01m |
| * - Get it work for kernel version >= 2.1.75 |
| * - Dynamic assign SCSI bus reset holding time in initio_init() |
| * 07/02/98 hc - v1.01n |
| * - Support 0002134A |
| * 08/07/98 hc - v1.01o |
| * - Change the initio_abort_srb routine to use scsi_done. <01> |
| * 09/07/98 hl - v1.02 |
| * - Change the INI9100U define and proc_dir_entry to |
| * reflect the newer Kernel 2.1.118, but the v1.o1o |
| * should work with Kernel 2.1.118. |
| * 09/20/98 wh - v1.02a |
| * - Support Abort command. |
| * - Handle reset routine. |
| * 09/21/98 hl - v1.03 |
| * - remove comments. |
| * 12/09/98 bv - v1.03a |
| * - Removed unused code |
| * 12/13/98 bv - v1.03b |
| * - Remove cli() locking for kernels >= 2.1.95. This uses |
| * spinlocks to serialize access to the pSRB_head and |
| * pSRB_tail members of the HCS structure. |
| * 09/01/99 bv - v1.03d |
| * - Fixed a deadlock problem in SMP. |
| * 21/01/99 bv - v1.03e |
| * - Add support for the Domex 3192U PCI SCSI |
| * This is a slightly modified patch by |
| * Brian Macy <bmacy@sunshinecomputing.com> |
| * 22/02/99 bv - v1.03f |
| * - Didn't detect the INIC-950 in 2.0.x correctly. |
| * Now fixed. |
| * 05/07/99 bv - v1.03g |
| * - Changed the assumption that HZ = 100 |
| * 10/17/03 mc - v1.04 |
| * - added new DMA API support |
| * 06/01/04 jmd - v1.04a |
| * - Re-add reset_bus support |
| **************************************************************************/ |
| |
| #include <linux/module.h> |
| #include <linux/errno.h> |
| #include <linux/delay.h> |
| #include <linux/pci.h> |
| #include <linux/init.h> |
| #include <linux/blkdev.h> |
| #include <linux/spinlock.h> |
| #include <linux/stat.h> |
| #include <linux/kernel.h> |
| #include <linux/proc_fs.h> |
| #include <linux/string.h> |
| #include <linux/interrupt.h> |
| #include <linux/ioport.h> |
| #include <linux/slab.h> |
| #include <linux/jiffies.h> |
| #include <linux/dma-mapping.h> |
| #include <asm/io.h> |
| |
| #include <scsi/scsi.h> |
| #include <scsi/scsi_cmnd.h> |
| #include <scsi/scsi_device.h> |
| #include <scsi/scsi_host.h> |
| #include <scsi/scsi_tcq.h> |
| |
| #include "initio.h" |
| |
| #define SENSE_SIZE 14 |
| |
| #define i91u_MAXQUEUE 2 |
| #define i91u_REVID "Initio INI-9X00U/UW SCSI device driver; Revision: 1.04a" |
| |
| #ifdef DEBUG_i91u |
| static unsigned int i91u_debug = DEBUG_DEFAULT; |
| #endif |
| |
| static int initio_tag_enable = 1; |
| |
| #ifdef DEBUG_i91u |
| static int setup_debug = 0; |
| #endif |
| |
| static void i91uSCBPost(u8 * pHcb, u8 * pScb); |
| |
| #define DEBUG_INTERRUPT 0 |
| #define DEBUG_QUEUE 0 |
| #define DEBUG_STATE 0 |
| #define INT_DISC 0 |
| |
| /*--- forward references ---*/ |
| static struct scsi_ctrl_blk *initio_find_busy_scb(struct initio_host * host, u16 tarlun); |
| static struct scsi_ctrl_blk *initio_find_done_scb(struct initio_host * host); |
| |
| static int tulip_main(struct initio_host * host); |
| |
| static int initio_next_state(struct initio_host * host); |
| static int initio_state_1(struct initio_host * host); |
| static int initio_state_2(struct initio_host * host); |
| static int initio_state_3(struct initio_host * host); |
| static int initio_state_4(struct initio_host * host); |
| static int initio_state_5(struct initio_host * host); |
| static int initio_state_6(struct initio_host * host); |
| static int initio_state_7(struct initio_host * host); |
| static int initio_xfer_data_in(struct initio_host * host); |
| static int initio_xfer_data_out(struct initio_host * host); |
| static int initio_xpad_in(struct initio_host * host); |
| static int initio_xpad_out(struct initio_host * host); |
| static int initio_status_msg(struct initio_host * host); |
| |
| static int initio_msgin(struct initio_host * host); |
| static int initio_msgin_sync(struct initio_host * host); |
| static int initio_msgin_accept(struct initio_host * host); |
| static int initio_msgout_reject(struct initio_host * host); |
| static int initio_msgin_extend(struct initio_host * host); |
| |
| static int initio_msgout_ide(struct initio_host * host); |
| static int initio_msgout_abort_targ(struct initio_host * host); |
| static int initio_msgout_abort_tag(struct initio_host * host); |
| |
| static int initio_bus_device_reset(struct initio_host * host); |
| static void initio_select_atn(struct initio_host * host, struct scsi_ctrl_blk * scb); |
| static void initio_select_atn3(struct initio_host * host, struct scsi_ctrl_blk * scb); |
| static void initio_select_atn_stop(struct initio_host * host, struct scsi_ctrl_blk * scb); |
| static int int_initio_busfree(struct initio_host * host); |
| static int int_initio_scsi_rst(struct initio_host * host); |
| static int int_initio_bad_seq(struct initio_host * host); |
| static int int_initio_resel(struct initio_host * host); |
| static int initio_sync_done(struct initio_host * host); |
| static int wdtr_done(struct initio_host * host); |
| static int wait_tulip(struct initio_host * host); |
| static int initio_wait_done_disc(struct initio_host * host); |
| static int initio_wait_disc(struct initio_host * host); |
| static void tulip_scsi(struct initio_host * host); |
| static int initio_post_scsi_rst(struct initio_host * host); |
| |
| static void initio_se2_ew_en(unsigned long base); |
| static void initio_se2_ew_ds(unsigned long base); |
| static int initio_se2_rd_all(unsigned long base); |
| static void initio_se2_update_all(unsigned long base); /* setup default pattern */ |
| static void initio_read_eeprom(unsigned long base); |
| |
| /* ---- INTERNAL VARIABLES ---- */ |
| |
| static NVRAM i91unvram; |
| static NVRAM *i91unvramp; |
| |
| static u8 i91udftNvRam[64] = |
| { |
| /*----------- header -----------*/ |
| 0x25, 0xc9, /* Signature */ |
| 0x40, /* Size */ |
| 0x01, /* Revision */ |
| /* -- Host Adapter Structure -- */ |
| 0x95, /* ModelByte0 */ |
| 0x00, /* ModelByte1 */ |
| 0x00, /* ModelInfo */ |
| 0x01, /* NumOfCh */ |
| NBC1_DEFAULT, /* BIOSConfig1 */ |
| 0, /* BIOSConfig2 */ |
| 0, /* HAConfig1 */ |
| 0, /* HAConfig2 */ |
| /* SCSI channel 0 and target Structure */ |
| 7, /* SCSIid */ |
| NCC1_DEFAULT, /* SCSIconfig1 */ |
| 0, /* SCSIconfig2 */ |
| 0x10, /* NumSCSItarget */ |
| |
| NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, |
| NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, |
| NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, |
| NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, |
| |
| /* SCSI channel 1 and target Structure */ |
| 7, /* SCSIid */ |
| NCC1_DEFAULT, /* SCSIconfig1 */ |
| 0, /* SCSIconfig2 */ |
| 0x10, /* NumSCSItarget */ |
| |
| NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, |
| NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, |
| NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, |
| NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0}; /* - CheckSum - */ |
| |
| |
| static u8 initio_rate_tbl[8] = /* fast 20 */ |
| { |
| /* nanosecond divide by 4 */ |
| 12, /* 50ns, 20M */ |
| 18, /* 75ns, 13.3M */ |
| 25, /* 100ns, 10M */ |
| 31, /* 125ns, 8M */ |
| 37, /* 150ns, 6.6M */ |
| 43, /* 175ns, 5.7M */ |
| 50, /* 200ns, 5M */ |
| 62 /* 250ns, 4M */ |
| }; |
| |
| static void initio_do_pause(unsigned amount) |
| { |
| /* Pause for amount jiffies */ |
| unsigned long the_time = jiffies + amount; |
| |
| while (time_before_eq(jiffies, the_time)) |
| cpu_relax(); |
| } |
| |
| /*-- forward reference --*/ |
| |
| /****************************************************************** |
| Input: instruction for Serial E2PROM |
| |
| EX: se2_rd(0 call se2_instr() to send address and read command |
| |
| StartBit OP_Code Address Data |
| --------- -------- ------------------ ------- |
| 1 1 , 0 A5,A4,A3,A2,A1,A0 D15-D0 |
| |
| +----------------------------------------------------- |
| | |
| CS -----+ |
| +--+ +--+ +--+ +--+ +--+ |
| ^ | ^ | ^ | ^ | ^ | |
| | | | | | | | | | | |
| CLK -------+ +--+ +--+ +--+ +--+ +-- |
| (leading edge trigger) |
| |
| +--1-----1--+ |
| | SB OP | OP A5 A4 |
| DI ----+ +--0------------------ |
| (address and cmd sent to nvram) |
| |
| -------------------------------------------+ |
| | |
| DO +--- |
| (data sent from nvram) |
| |
| |
| ******************************************************************/ |
| |
| /** |
| * initio_se2_instr - bitbang an instruction |
| * @base: Base of InitIO controller |
| * @instr: Instruction for serial E2PROM |
| * |
| * Bitbang an instruction out to the serial E2Prom |
| */ |
| |
| static void initio_se2_instr(unsigned long base, u8 instr) |
| { |
| int i; |
| u8 b; |
| |
| outb(SE2CS | SE2DO, base + TUL_NVRAM); /* cs+start bit */ |
| udelay(30); |
| outb(SE2CS | SE2CLK | SE2DO, base + TUL_NVRAM); /* +CLK */ |
| udelay(30); |
| |
| for (i = 0; i < 8; i++) { |
| if (instr & 0x80) |
| b = SE2CS | SE2DO; /* -CLK+dataBit */ |
| else |
| b = SE2CS; /* -CLK */ |
| outb(b, base + TUL_NVRAM); |
| udelay(30); |
| outb(b | SE2CLK, base + TUL_NVRAM); /* +CLK */ |
| udelay(30); |
| instr <<= 1; |
| } |
| outb(SE2CS, base + TUL_NVRAM); /* -CLK */ |
| udelay(30); |
| } |
| |
| |
| /** |
| * initio_se2_ew_en - Enable erase/write |
| * @base: Base address of InitIO controller |
| * |
| * Enable erase/write state of serial EEPROM |
| */ |
| void initio_se2_ew_en(unsigned long base) |
| { |
| initio_se2_instr(base, 0x30); /* EWEN */ |
| outb(0, base + TUL_NVRAM); /* -CS */ |
| udelay(30); |
| } |
| |
| |
| /** |
| * initio_se2_ew_ds - Disable erase/write |
| * @base: Base address of InitIO controller |
| * |
| * Disable erase/write state of serial EEPROM |
| */ |
| void initio_se2_ew_ds(unsigned long base) |
| { |
| initio_se2_instr(base, 0); /* EWDS */ |
| outb(0, base + TUL_NVRAM); /* -CS */ |
| udelay(30); |
| } |
| |
| |
| /** |
| * initio_se2_rd - read E2PROM word |
| * @base: Base of InitIO controller |
| * @addr: Address of word in E2PROM |
| * |
| * Read a word from the NV E2PROM device |
| */ |
| static u16 initio_se2_rd(unsigned long base, u8 addr) |
| { |
| u8 instr, rb; |
| u16 val = 0; |
| int i; |
| |
| instr = (u8) (addr | 0x80); |
| initio_se2_instr(base, instr); /* READ INSTR */ |
| |
| for (i = 15; i >= 0; i--) { |
| outb(SE2CS | SE2CLK, base + TUL_NVRAM); /* +CLK */ |
| udelay(30); |
| outb(SE2CS, base + TUL_NVRAM); /* -CLK */ |
| |
| /* sample data after the following edge of clock */ |
| rb = inb(base + TUL_NVRAM); |
| rb &= SE2DI; |
| val += (rb << i); |
| udelay(30); /* 6/20/95 */ |
| } |
| |
| outb(0, base + TUL_NVRAM); /* no chip select */ |
| udelay(30); |
| return val; |
| } |
| |
| /** |
| * initio_se2_wr - read E2PROM word |
| * @base: Base of InitIO controller |
| * @addr: Address of word in E2PROM |
| * @val: Value to write |
| * |
| * Write a word to the NV E2PROM device. Used when recovering from |
| * a problem with the NV. |
| */ |
| static void initio_se2_wr(unsigned long base, u8 addr, u16 val) |
| { |
| u8 rb; |
| u8 instr; |
| int i; |
| |
| instr = (u8) (addr | 0x40); |
| initio_se2_instr(base, instr); /* WRITE INSTR */ |
| for (i = 15; i >= 0; i--) { |
| if (val & 0x8000) |
| outb(SE2CS | SE2DO, base + TUL_NVRAM); /* -CLK+dataBit 1 */ |
| else |
| outb(SE2CS, base + TUL_NVRAM); /* -CLK+dataBit 0 */ |
| udelay(30); |
| outb(SE2CS | SE2CLK, base + TUL_NVRAM); /* +CLK */ |
| udelay(30); |
| val <<= 1; |
| } |
| outb(SE2CS, base + TUL_NVRAM); /* -CLK */ |
| udelay(30); |
| outb(0, base + TUL_NVRAM); /* -CS */ |
| udelay(30); |
| |
| outb(SE2CS, base + TUL_NVRAM); /* +CS */ |
| udelay(30); |
| |
| for (;;) { |
| outb(SE2CS | SE2CLK, base + TUL_NVRAM); /* +CLK */ |
| udelay(30); |
| outb(SE2CS, base + TUL_NVRAM); /* -CLK */ |
| udelay(30); |
| if ((rb = inb(base + TUL_NVRAM)) & SE2DI) |
| break; /* write complete */ |
| } |
| outb(0, base + TUL_NVRAM); /* -CS */ |
| } |
| |
| /** |
| * initio_se2_rd_all - read hostadapter NV configuration |
| * @base: Base address of InitIO controller |
| * |
| * Reads the E2PROM data into main memory. Ensures that the checksum |
| * and header marker are valid. Returns 1 on success -1 on error. |
| */ |
| |
| static int initio_se2_rd_all(unsigned long base) |
| { |
| int i; |
| u16 chksum = 0; |
| u16 *np; |
| |
| i91unvramp = &i91unvram; |
| np = (u16 *) i91unvramp; |
| for (i = 0; i < 32; i++) |
| *np++ = initio_se2_rd(base, i); |
| |
| /* Is signature "ini" ok ? */ |
| if (i91unvramp->NVM_Signature != INI_SIGNATURE) |
| return -1; |
| /* Is ckecksum ok ? */ |
| np = (u16 *) i91unvramp; |
| for (i = 0; i < 31; i++) |
| chksum += *np++; |
| if (i91unvramp->NVM_CheckSum != chksum) |
| return -1; |
| return 1; |
| } |
| |
| /** |
| * initio_se2_update_all - Update E2PROM |
| * @base: Base of InitIO controller |
| * |
| * Update the E2PROM by wrting any changes into the E2PROM |
| * chip, rewriting the checksum. |
| */ |
| static void initio_se2_update_all(unsigned long base) |
| { /* setup default pattern */ |
| int i; |
| u16 chksum = 0; |
| u16 *np, *np1; |
| |
| i91unvramp = &i91unvram; |
| /* Calculate checksum first */ |
| np = (u16 *) i91udftNvRam; |
| for (i = 0; i < 31; i++) |
| chksum += *np++; |
| *np = chksum; |
| initio_se2_ew_en(base); /* Enable write */ |
| |
| np = (u16 *) i91udftNvRam; |
| np1 = (u16 *) i91unvramp; |
| for (i = 0; i < 32; i++, np++, np1++) { |
| if (*np != *np1) |
| initio_se2_wr(base, i, *np); |
| } |
| initio_se2_ew_ds(base); /* Disable write */ |
| } |
| |
| /** |
| * initio_read_eeprom - Retrieve configuration |
| * @base: Base of InitIO Host Adapter |
| * |
| * Retrieve the host adapter configuration data from E2Prom. If the |
| * data is invalid then the defaults are used and are also restored |
| * into the E2PROM. This forms the access point for the SCSI driver |
| * into the E2PROM layer, the other functions for the E2PROM are all |
| * internal use. |
| * |
| * Must be called single threaded, uses a shared global area. |
| */ |
| |
| static void initio_read_eeprom(unsigned long base) |
| { |
| u8 gctrl; |
| |
| i91unvramp = &i91unvram; |
| /* Enable EEProm programming */ |
| gctrl = inb(base + TUL_GCTRL); |
| outb(gctrl | TUL_GCTRL_EEPROM_BIT, base + TUL_GCTRL); |
| if (initio_se2_rd_all(base) != 1) { |
| initio_se2_update_all(base); /* setup default pattern */ |
| initio_se2_rd_all(base); /* load again */ |
| } |
| /* Disable EEProm programming */ |
| gctrl = inb(base + TUL_GCTRL); |
| outb(gctrl & ~TUL_GCTRL_EEPROM_BIT, base + TUL_GCTRL); |
| } |
| |
| /** |
| * initio_stop_bm - stop bus master |
| * @host: InitIO we are stopping |
| * |
| * Stop any pending DMA operation, aborting the DMA if necessary |
| */ |
| |
| static void initio_stop_bm(struct initio_host * host) |
| { |
| |
| if (inb(host->addr + TUL_XStatus) & XPEND) { /* if DMA xfer is pending, abort DMA xfer */ |
| outb(TAX_X_ABT | TAX_X_CLR_FIFO, host->addr + TUL_XCmd); |
| /* wait Abort DMA xfer done */ |
| while ((inb(host->addr + TUL_Int) & XABT) == 0) |
| cpu_relax(); |
| } |
| outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); |
| } |
| |
| /** |
| * initio_reset_scsi - Reset SCSI host controller |
| * @host: InitIO host to reset |
| * @seconds: Recovery time |
| * |
| * Perform a full reset of the SCSI subsystem. |
| */ |
| |
| static int initio_reset_scsi(struct initio_host * host, int seconds) |
| { |
| outb(TSC_RST_BUS, host->addr + TUL_SCtrl0); |
| |
| while (!((host->jsint = inb(host->addr + TUL_SInt)) & TSS_SCSIRST_INT)) |
| cpu_relax(); |
| |
| /* reset tulip chip */ |
| outb(0, host->addr + TUL_SSignal); |
| |
| /* Stall for a while, wait for target's firmware ready,make it 2 sec ! */ |
| /* SONY 5200 tape drive won't work if only stall for 1 sec */ |
| /* FIXME: this is a very long busy wait right now */ |
| initio_do_pause(seconds * HZ); |
| |
| inb(host->addr + TUL_SInt); |
| return SCSI_RESET_SUCCESS; |
| } |
| |
| /** |
| * initio_init - set up an InitIO host adapter |
| * @host: InitIO host adapter |
| * @bios_addr: BIOS address |
| * |
| * Set up the host adapter and devices according to the configuration |
| * retrieved from the E2PROM. |
| * |
| * Locking: Calls E2PROM layer code which is not re-enterable so must |
| * run single threaded for now. |
| */ |
| |
| static void initio_init(struct initio_host * host, u8 *bios_addr) |
| { |
| int i; |
| u8 *flags; |
| u8 *heads; |
| |
| /* Get E2Prom configuration */ |
| initio_read_eeprom(host->addr); |
| if (i91unvramp->NVM_SCSIInfo[0].NVM_NumOfTarg == 8) |
| host->max_tar = 8; |
| else |
| host->max_tar = 16; |
| |
| host->config = i91unvramp->NVM_SCSIInfo[0].NVM_ChConfig1; |
| |
| host->scsi_id = i91unvramp->NVM_SCSIInfo[0].NVM_ChSCSIID; |
| host->idmask = ~(1 << host->scsi_id); |
| |
| #ifdef CHK_PARITY |
| /* Enable parity error response */ |
| outb(inb(host->addr + TUL_PCMD) | 0x40, host->addr + TUL_PCMD); |
| #endif |
| |
| /* Mask all the interrupt */ |
| outb(0x1F, host->addr + TUL_Mask); |
| |
| initio_stop_bm(host); |
| /* --- Initialize the tulip --- */ |
| outb(TSC_RST_CHIP, host->addr + TUL_SCtrl0); |
| |
| /* program HBA's SCSI ID */ |
| outb(host->scsi_id << 4, host->addr + TUL_SScsiId); |
| |
| /* Enable Initiator Mode ,phase latch,alternate sync period mode, |
| disable SCSI reset */ |
| if (host->config & HCC_EN_PAR) |
| host->sconf1 = (TSC_INITDEFAULT | TSC_EN_SCSI_PAR); |
| else |
| host->sconf1 = (TSC_INITDEFAULT); |
| outb(host->sconf1, host->addr + TUL_SConfig); |
| |
| /* Enable HW reselect */ |
| outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); |
| |
| outb(0, host->addr + TUL_SPeriod); |
| |
| /* selection time out = 250 ms */ |
| outb(153, host->addr + TUL_STimeOut); |
| |
| /* Enable SCSI terminator */ |
| outb((host->config & (HCC_ACT_TERM1 | HCC_ACT_TERM2)), |
| host->addr + TUL_XCtrl); |
| outb(((host->config & HCC_AUTO_TERM) >> 4) | |
| (inb(host->addr + TUL_GCTRL1) & 0xFE), |
| host->addr + TUL_GCTRL1); |
| |
| for (i = 0, |
| flags = & (i91unvramp->NVM_SCSIInfo[0].NVM_Targ0Config), |
| heads = bios_addr + 0x180; |
| i < host->max_tar; |
| i++, flags++) { |
| host->targets[i].flags = *flags & ~(TCF_SYNC_DONE | TCF_WDTR_DONE); |
| if (host->targets[i].flags & TCF_EN_255) |
| host->targets[i].drv_flags = TCF_DRV_255_63; |
| else |
| host->targets[i].drv_flags = 0; |
| host->targets[i].js_period = 0; |
| host->targets[i].sconfig0 = host->sconf1; |
| host->targets[i].heads = *heads++; |
| if (host->targets[i].heads == 255) |
| host->targets[i].drv_flags = TCF_DRV_255_63; |
| else |
| host->targets[i].drv_flags = 0; |
| host->targets[i].sectors = *heads++; |
| host->targets[i].flags &= ~TCF_BUSY; |
| host->act_tags[i] = 0; |
| host->max_tags[i] = 0xFF; |
| } /* for */ |
| printk("i91u: PCI Base=0x%04X, IRQ=%d, BIOS=0x%04X0, SCSI ID=%d\n", |
| host->addr, host->pci_dev->irq, |
| host->bios_addr, host->scsi_id); |
| /* Reset SCSI Bus */ |
| if (host->config & HCC_SCSI_RESET) { |
| printk(KERN_INFO "i91u: Reset SCSI Bus ... \n"); |
| initio_reset_scsi(host, 10); |
| } |
| outb(0x17, host->addr + TUL_SCFG1); |
| outb(0xE9, host->addr + TUL_SIntEnable); |
| } |
| |
| /** |
| * initio_alloc_scb - Allocate an SCB |
| * @host: InitIO host we are allocating for |
| * |
| * Walk the SCB list for the controller and allocate a free SCB if |
| * one exists. |
| */ |
| static struct scsi_ctrl_blk *initio_alloc_scb(struct initio_host *host) |
| { |
| struct scsi_ctrl_blk *scb; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&host->avail_lock, flags); |
| if ((scb = host->first_avail) != NULL) { |
| #if DEBUG_QUEUE |
| printk("find scb at %p\n", scb); |
| #endif |
| if ((host->first_avail = scb->next) == NULL) |
| host->last_avail = NULL; |
| scb->next = NULL; |
| scb->status = SCB_RENT; |
| } |
| spin_unlock_irqrestore(&host->avail_lock, flags); |
| return scb; |
| } |
| |
| /** |
| * initio_release_scb - Release an SCB |
| * @host: InitIO host that owns the SCB |
| * @cmnd: SCB command block being returned |
| * |
| * Return an allocated SCB to the host free list |
| */ |
| |
| static void initio_release_scb(struct initio_host * host, struct scsi_ctrl_blk * cmnd) |
| { |
| unsigned long flags; |
| |
| #if DEBUG_QUEUE |
| printk("Release SCB %p; ", cmnd); |
| #endif |
| spin_lock_irqsave(&(host->avail_lock), flags); |
| cmnd->srb = NULL; |
| cmnd->status = 0; |
| cmnd->next = NULL; |
| if (host->last_avail != NULL) { |
| host->last_avail->next = cmnd; |
| host->last_avail = cmnd; |
| } else { |
| host->first_avail = cmnd; |
| host->last_avail = cmnd; |
| } |
| spin_unlock_irqrestore(&(host->avail_lock), flags); |
| } |
| |
| /***************************************************************************/ |
| static void initio_append_pend_scb(struct initio_host * host, struct scsi_ctrl_blk * scbp) |
| { |
| |
| #if DEBUG_QUEUE |
| printk("Append pend SCB %p; ", scbp); |
| #endif |
| scbp->status = SCB_PEND; |
| scbp->next = NULL; |
| if (host->last_pending != NULL) { |
| host->last_pending->next = scbp; |
| host->last_pending = scbp; |
| } else { |
| host->first_pending = scbp; |
| host->last_pending = scbp; |
| } |
| } |
| |
| /***************************************************************************/ |
| static void initio_push_pend_scb(struct initio_host * host, struct scsi_ctrl_blk * scbp) |
| { |
| |
| #if DEBUG_QUEUE |
| printk("Push pend SCB %p; ", scbp); |
| #endif |
| scbp->status = SCB_PEND; |
| if ((scbp->next = host->first_pending) != NULL) { |
| host->first_pending = scbp; |
| } else { |
| host->first_pending = scbp; |
| host->last_pending = scbp; |
| } |
| } |
| |
| static struct scsi_ctrl_blk *initio_find_first_pend_scb(struct initio_host * host) |
| { |
| struct scsi_ctrl_blk *first; |
| |
| |
| first = host->first_pending; |
| while (first != NULL) { |
| if (first->opcode != ExecSCSI) |
| return first; |
| if (first->tagmsg == 0) { |
| if ((host->act_tags[first->target] == 0) && |
| !(host->targets[first->target].flags & TCF_BUSY)) |
| return first; |
| } else { |
| if ((host->act_tags[first->target] >= |
| host->max_tags[first->target]) | |
| (host->targets[first->target].flags & TCF_BUSY)) { |
| first = first->next; |
| continue; |
| } |
| return first; |
| } |
| first = first->next; |
| } |
| return first; |
| } |
| |
| static void initio_unlink_pend_scb(struct initio_host * host, struct scsi_ctrl_blk * scb) |
| { |
| struct scsi_ctrl_blk *tmp, *prev; |
| |
| #if DEBUG_QUEUE |
| printk("unlink pend SCB %p; ", scb); |
| #endif |
| |
| prev = tmp = host->first_pending; |
| while (tmp != NULL) { |
| if (scb == tmp) { /* Unlink this SCB */ |
| if (tmp == host->first_pending) { |
| if ((host->first_pending = tmp->next) == NULL) |
| host->last_pending = NULL; |
| } else { |
| prev->next = tmp->next; |
| if (tmp == host->last_pending) |
| host->last_pending = prev; |
| } |
| tmp->next = NULL; |
| break; |
| } |
| prev = tmp; |
| tmp = tmp->next; |
| } |
| } |
| |
| static void initio_append_busy_scb(struct initio_host * host, struct scsi_ctrl_blk * scbp) |
| { |
| |
| #if DEBUG_QUEUE |
| printk("append busy SCB %p; ", scbp); |
| #endif |
| if (scbp->tagmsg) |
| host->act_tags[scbp->target]++; |
| else |
| host->targets[scbp->target].flags |= TCF_BUSY; |
| scbp->status = SCB_BUSY; |
| scbp->next = NULL; |
| if (host->last_busy != NULL) { |
| host->last_busy->next = scbp; |
| host->last_busy = scbp; |
| } else { |
| host->first_busy = scbp; |
| host->last_busy = scbp; |
| } |
| } |
| |
| /***************************************************************************/ |
| static struct scsi_ctrl_blk *initio_pop_busy_scb(struct initio_host * host) |
| { |
| struct scsi_ctrl_blk *tmp; |
| |
| |
| if ((tmp = host->first_busy) != NULL) { |
| if ((host->first_busy = tmp->next) == NULL) |
| host->last_busy = NULL; |
| tmp->next = NULL; |
| if (tmp->tagmsg) |
| host->act_tags[tmp->target]--; |
| else |
| host->targets[tmp->target].flags &= ~TCF_BUSY; |
| } |
| #if DEBUG_QUEUE |
| printk("Pop busy SCB %p; ", tmp); |
| #endif |
| return tmp; |
| } |
| |
| /***************************************************************************/ |
| static void initio_unlink_busy_scb(struct initio_host * host, struct scsi_ctrl_blk * scb) |
| { |
| struct scsi_ctrl_blk *tmp, *prev; |
| |
| #if DEBUG_QUEUE |
| printk("unlink busy SCB %p; ", scb); |
| #endif |
| |
| prev = tmp = host->first_busy; |
| while (tmp != NULL) { |
| if (scb == tmp) { /* Unlink this SCB */ |
| if (tmp == host->first_busy) { |
| if ((host->first_busy = tmp->next) == NULL) |
| host->last_busy = NULL; |
| } else { |
| prev->next = tmp->next; |
| if (tmp == host->last_busy) |
| host->last_busy = prev; |
| } |
| tmp->next = NULL; |
| if (tmp->tagmsg) |
| host->act_tags[tmp->target]--; |
| else |
| host->targets[tmp->target].flags &= ~TCF_BUSY; |
| break; |
| } |
| prev = tmp; |
| tmp = tmp->next; |
| } |
| return; |
| } |
| |
| struct scsi_ctrl_blk *initio_find_busy_scb(struct initio_host * host, u16 tarlun) |
| { |
| struct scsi_ctrl_blk *tmp; |
| u16 scbp_tarlun; |
| |
| |
| tmp = host->first_busy; |
| while (tmp != NULL) { |
| scbp_tarlun = (tmp->lun << 8) | (tmp->target); |
| if (scbp_tarlun == tarlun) { /* Unlink this SCB */ |
| break; |
| } |
| tmp = tmp->next; |
| } |
| #if DEBUG_QUEUE |
| printk("find busy SCB %p; ", tmp); |
| #endif |
| return tmp; |
| } |
| |
| static void initio_append_done_scb(struct initio_host * host, struct scsi_ctrl_blk * scbp) |
| { |
| #if DEBUG_QUEUE |
| printk("append done SCB %p; ", scbp); |
| #endif |
| |
| scbp->status = SCB_DONE; |
| scbp->next = NULL; |
| if (host->last_done != NULL) { |
| host->last_done->next = scbp; |
| host->last_done = scbp; |
| } else { |
| host->first_done = scbp; |
| host->last_done = scbp; |
| } |
| } |
| |
| struct scsi_ctrl_blk *initio_find_done_scb(struct initio_host * host) |
| { |
| struct scsi_ctrl_blk *tmp; |
| |
| if ((tmp = host->first_done) != NULL) { |
| if ((host->first_done = tmp->next) == NULL) |
| host->last_done = NULL; |
| tmp->next = NULL; |
| } |
| #if DEBUG_QUEUE |
| printk("find done SCB %p; ",tmp); |
| #endif |
| return tmp; |
| } |
| |
| static int initio_abort_srb(struct initio_host * host, struct scsi_cmnd *srbp) |
| { |
| unsigned long flags; |
| struct scsi_ctrl_blk *tmp, *prev; |
| |
| spin_lock_irqsave(&host->semaph_lock, flags); |
| |
| if ((host->semaph == 0) && (host->active == NULL)) { |
| /* disable Jasmin SCSI Int */ |
| outb(0x1F, host->addr + TUL_Mask); |
| spin_unlock_irqrestore(&host->semaph_lock, flags); |
| /* FIXME: synchronize_irq needed ? */ |
| tulip_main(host); |
| spin_lock_irqsave(&host->semaph_lock, flags); |
| host->semaph = 1; |
| outb(0x0F, host->addr + TUL_Mask); |
| spin_unlock_irqrestore(&host->semaph_lock, flags); |
| return SCSI_ABORT_SNOOZE; |
| } |
| prev = tmp = host->first_pending; /* Check Pend queue */ |
| while (tmp != NULL) { |
| /* 07/27/98 */ |
| if (tmp->srb == srbp) { |
| if (tmp == host->active) { |
| spin_unlock_irqrestore(&host->semaph_lock, flags); |
| return SCSI_ABORT_BUSY; |
| } else if (tmp == host->first_pending) { |
| if ((host->first_pending = tmp->next) == NULL) |
| host->last_pending = NULL; |
| } else { |
| prev->next = tmp->next; |
| if (tmp == host->last_pending) |
| host->last_pending = prev; |
| } |
| tmp->hastat = HOST_ABORTED; |
| tmp->flags |= SCF_DONE; |
| if (tmp->flags & SCF_POST) |
| (*tmp->post) ((u8 *) host, (u8 *) tmp); |
| spin_unlock_irqrestore(&host->semaph_lock, flags); |
| return SCSI_ABORT_SUCCESS; |
| } |
| prev = tmp; |
| tmp = tmp->next; |
| } |
| |
| prev = tmp = host->first_busy; /* Check Busy queue */ |
| while (tmp != NULL) { |
| if (tmp->srb == srbp) { |
| if (tmp == host->active) { |
| spin_unlock_irqrestore(&host->semaph_lock, flags); |
| return SCSI_ABORT_BUSY; |
| } else if (tmp->tagmsg == 0) { |
| spin_unlock_irqrestore(&host->semaph_lock, flags); |
| return SCSI_ABORT_BUSY; |
| } else { |
| host->act_tags[tmp->target]--; |
| if (tmp == host->first_busy) { |
| if ((host->first_busy = tmp->next) == NULL) |
| host->last_busy = NULL; |
| } else { |
| prev->next = tmp->next; |
| if (tmp == host->last_busy) |
| host->last_busy = prev; |
| } |
| tmp->next = NULL; |
| |
| |
| tmp->hastat = HOST_ABORTED; |
| tmp->flags |= SCF_DONE; |
| if (tmp->flags & SCF_POST) |
| (*tmp->post) ((u8 *) host, (u8 *) tmp); |
| spin_unlock_irqrestore(&host->semaph_lock, flags); |
| return SCSI_ABORT_SUCCESS; |
| } |
| } |
| prev = tmp; |
| tmp = tmp->next; |
| } |
| spin_unlock_irqrestore(&host->semaph_lock, flags); |
| return SCSI_ABORT_NOT_RUNNING; |
| } |
| |
| /***************************************************************************/ |
| static int initio_bad_seq(struct initio_host * host) |
| { |
| struct scsi_ctrl_blk *scb; |
| |
| printk("initio_bad_seg c=%d\n", host->index); |
| |
| if ((scb = host->active) != NULL) { |
| initio_unlink_busy_scb(host, scb); |
| scb->hastat = HOST_BAD_PHAS; |
| scb->tastat = 0; |
| initio_append_done_scb(host, scb); |
| } |
| initio_stop_bm(host); |
| initio_reset_scsi(host, 8); /* 7/29/98 */ |
| return initio_post_scsi_rst(host); |
| } |
| |
| |
| /************************************************************************/ |
| static void initio_exec_scb(struct initio_host * host, struct scsi_ctrl_blk * scb) |
| { |
| unsigned long flags; |
| |
| scb->mode = 0; |
| |
| scb->sgidx = 0; |
| scb->sgmax = scb->sglen; |
| |
| spin_lock_irqsave(&host->semaph_lock, flags); |
| |
| initio_append_pend_scb(host, scb); /* Append this SCB to Pending queue */ |
| |
| /* VVVVV 07/21/98 */ |
| if (host->semaph == 1) { |
| /* Disable Jasmin SCSI Int */ |
| outb(0x1F, host->addr + TUL_Mask); |
| host->semaph = 0; |
| spin_unlock_irqrestore(&host->semaph_lock, flags); |
| |
| tulip_main(host); |
| |
| spin_lock_irqsave(&host->semaph_lock, flags); |
| host->semaph = 1; |
| outb(0x0F, host->addr + TUL_Mask); |
| } |
| spin_unlock_irqrestore(&host->semaph_lock, flags); |
| return; |
| } |
| |
| /***************************************************************************/ |
| static int initio_isr(struct initio_host * host) |
| { |
| if (inb(host->addr + TUL_Int) & TSS_INT_PENDING) { |
| if (host->semaph == 1) { |
| outb(0x1F, host->addr + TUL_Mask); |
| /* Disable Tulip SCSI Int */ |
| host->semaph = 0; |
| |
| tulip_main(host); |
| |
| host->semaph = 1; |
| outb(0x0F, host->addr + TUL_Mask); |
| return 1; |
| } |
| } |
| return 0; |
| } |
| |
| static int tulip_main(struct initio_host * host) |
| { |
| struct scsi_ctrl_blk *scb; |
| |
| for (;;) { |
| tulip_scsi(host); /* Call tulip_scsi */ |
| |
| /* Walk the list of completed SCBs */ |
| while ((scb = initio_find_done_scb(host)) != NULL) { /* find done entry */ |
| if (scb->tastat == INI_QUEUE_FULL) { |
| host->max_tags[scb->target] = |
| host->act_tags[scb->target] - 1; |
| scb->tastat = 0; |
| initio_append_pend_scb(host, scb); |
| continue; |
| } |
| if (!(scb->mode & SCM_RSENS)) { /* not in auto req. sense mode */ |
| if (scb->tastat == 2) { |
| |
| /* clr sync. nego flag */ |
| |
| if (scb->flags & SCF_SENSE) { |
| u8 len; |
| len = scb->senselen; |
| if (len == 0) |
| len = 1; |
| scb->buflen = scb->senselen; |
| scb->bufptr = scb->senseptr; |
| scb->flags &= ~(SCF_SG | SCF_DIR); /* for xfer_data_in */ |
| /* so, we won't report wrong direction in xfer_data_in, |
| and won't report HOST_DO_DU in state_6 */ |
| scb->mode = SCM_RSENS; |
| scb->ident &= 0xBF; /* Disable Disconnect */ |
| scb->tagmsg = 0; |
| scb->tastat = 0; |
| scb->cdblen = 6; |
| scb->cdb[0] = SCSICMD_RequestSense; |
| scb->cdb[1] = 0; |
| scb->cdb[2] = 0; |
| scb->cdb[3] = 0; |
| scb->cdb[4] = len; |
| scb->cdb[5] = 0; |
| initio_push_pend_scb(host, scb); |
| break; |
| } |
| } |
| } else { /* in request sense mode */ |
| |
| if (scb->tastat == 2) { /* check contition status again after sending |
| requset sense cmd 0x3 */ |
| scb->hastat = HOST_BAD_PHAS; |
| } |
| scb->tastat = 2; |
| } |
| scb->flags |= SCF_DONE; |
| if (scb->flags & SCF_POST) { |
| /* FIXME: only one post method and lose casts */ |
| (*scb->post) ((u8 *) host, (u8 *) scb); |
| } |
| } /* while */ |
| /* find_active: */ |
| if (inb(host->addr + TUL_SStatus0) & TSS_INT_PENDING) |
| continue; |
| if (host->active) /* return to OS and wait for xfer_done_ISR/Selected_ISR */ |
| return 1; /* return to OS, enable interrupt */ |
| /* Check pending SCB */ |
| if (initio_find_first_pend_scb(host) == NULL) |
| return 1; /* return to OS, enable interrupt */ |
| } /* End of for loop */ |
| /* statement won't reach here */ |
| } |
| |
| static void tulip_scsi(struct initio_host * host) |
| { |
| struct scsi_ctrl_blk *scb; |
| struct target_control *active_tc; |
| |
| /* make sure to service interrupt asap */ |
| if ((host->jsstatus0 = inb(host->addr + TUL_SStatus0)) & TSS_INT_PENDING) { |
| host->phase = host->jsstatus0 & TSS_PH_MASK; |
| host->jsstatus1 = inb(host->addr + TUL_SStatus1); |
| host->jsint = inb(host->addr + TUL_SInt); |
| if (host->jsint & TSS_SCSIRST_INT) { /* SCSI bus reset detected */ |
| int_initio_scsi_rst(host); |
| return; |
| } |
| if (host->jsint & TSS_RESEL_INT) { /* if selected/reselected interrupt */ |
| if (int_initio_resel(host) == 0) |
| initio_next_state(host); |
| return; |
| } |
| if (host->jsint & TSS_SEL_TIMEOUT) { |
| int_initio_busfree(host); |
| return; |
| } |
| if (host->jsint & TSS_DISC_INT) { /* BUS disconnection */ |
| int_initio_busfree(host); /* unexpected bus free or sel timeout */ |
| return; |
| } |
| if (host->jsint & (TSS_FUNC_COMP | TSS_BUS_SERV)) { /* func complete or Bus service */ |
| if ((scb = host->active) != NULL) |
| initio_next_state(host); |
| return; |
| } |
| } |
| if (host->active != NULL) |
| return; |
| |
| if ((scb = initio_find_first_pend_scb(host)) == NULL) |
| return; |
| |
| /* program HBA's SCSI ID & target SCSI ID */ |
| outb((host->scsi_id << 4) | (scb->target & 0x0F), |
| host->addr + TUL_SScsiId); |
| if (scb->opcode == ExecSCSI) { |
| active_tc = &host->targets[scb->target]; |
| |
| if (scb->tagmsg) |
| active_tc->drv_flags |= TCF_DRV_EN_TAG; |
| else |
| active_tc->drv_flags &= ~TCF_DRV_EN_TAG; |
| |
| outb(active_tc->js_period, host->addr + TUL_SPeriod); |
| if ((active_tc->flags & (TCF_WDTR_DONE | TCF_NO_WDTR)) == 0) { /* do wdtr negotiation */ |
| initio_select_atn_stop(host, scb); |
| } else { |
| if ((active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) == 0) { /* do sync negotiation */ |
| initio_select_atn_stop(host, scb); |
| } else { |
| if (scb->tagmsg) |
| initio_select_atn3(host, scb); |
| else |
| initio_select_atn(host, scb); |
| } |
| } |
| if (scb->flags & SCF_POLL) { |
| while (wait_tulip(host) != -1) { |
| if (initio_next_state(host) == -1) |
| break; |
| } |
| } |
| } else if (scb->opcode == BusDevRst) { |
| initio_select_atn_stop(host, scb); |
| scb->next_state = 8; |
| if (scb->flags & SCF_POLL) { |
| while (wait_tulip(host) != -1) { |
| if (initio_next_state(host) == -1) |
| break; |
| } |
| } |
| } else if (scb->opcode == AbortCmd) { |
| if (initio_abort_srb(host, scb->srb) != 0) { |
| initio_unlink_pend_scb(host, scb); |
| initio_release_scb(host, scb); |
| } else { |
| scb->opcode = BusDevRst; |
| initio_select_atn_stop(host, scb); |
| scb->next_state = 8; |
| } |
| } else { |
| initio_unlink_pend_scb(host, scb); |
| scb->hastat = 0x16; /* bad command */ |
| initio_append_done_scb(host, scb); |
| } |
| return; |
| } |
| |
| /** |
| * initio_next_state - Next SCSI state |
| * @host: InitIO host we are processing |
| * |
| * Progress the active command block along the state machine |
| * until we hit a state which we must wait for activity to occur. |
| * |
| * Returns zero or a negative code. |
| */ |
| |
| static int initio_next_state(struct initio_host * host) |
| { |
| int next; |
| |
| next = host->active->next_state; |
| for (;;) { |
| switch (next) { |
| case 1: |
| next = initio_state_1(host); |
| break; |
| case 2: |
| next = initio_state_2(host); |
| break; |
| case 3: |
| next = initio_state_3(host); |
| break; |
| case 4: |
| next = initio_state_4(host); |
| break; |
| case 5: |
| next = initio_state_5(host); |
| break; |
| case 6: |
| next = initio_state_6(host); |
| break; |
| case 7: |
| next = initio_state_7(host); |
| break; |
| case 8: |
| return initio_bus_device_reset(host); |
| default: |
| return initio_bad_seq(host); |
| } |
| if (next <= 0) |
| return next; |
| } |
| } |
| |
| |
| /** |
| * initio_state_1 - SCSI state machine |
| * @host: InitIO host we are controlling |
| * |
| * Perform SCSI state processing for Select/Attention/Stop |
| */ |
| |
| static int initio_state_1(struct initio_host * host) |
| { |
| struct scsi_ctrl_blk *scb = host->active; |
| struct target_control *active_tc = host->active_tc; |
| #if DEBUG_STATE |
| printk("-s1-"); |
| #endif |
| |
| /* Move the SCB from pending to busy */ |
| initio_unlink_pend_scb(host, scb); |
| initio_append_busy_scb(host, scb); |
| |
| outb(active_tc->sconfig0, host->addr + TUL_SConfig ); |
| /* ATN on */ |
| if (host->phase == MSG_OUT) { |
| outb(TSC_EN_BUS_IN | TSC_HW_RESELECT, host->addr + TUL_SCtrl1); |
| outb(scb->ident, host->addr + TUL_SFifo); |
| |
| if (scb->tagmsg) { |
| outb(scb->tagmsg, host->addr + TUL_SFifo); |
| outb(scb->tagid, host->addr + TUL_SFifo); |
| } |
| if ((active_tc->flags & (TCF_WDTR_DONE | TCF_NO_WDTR)) == 0) { |
| active_tc->flags |= TCF_WDTR_DONE; |
| outb(EXTENDED_MESSAGE, host->addr + TUL_SFifo); |
| outb(2, host->addr + TUL_SFifo); /* Extended msg length */ |
| outb(EXTENDED_SDTR, host->addr + TUL_SFifo); /* Sync request */ |
| outb(1, host->addr + TUL_SFifo); /* Start from 16 bits */ |
| } else if ((active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) == 0) { |
| active_tc->flags |= TCF_SYNC_DONE; |
| outb(EXTENDED_MESSAGE, host->addr + TUL_SFifo); |
| outb(3, host->addr + TUL_SFifo); /* extended msg length */ |
| outb(EXTENDED_SDTR, host->addr + TUL_SFifo); /* sync request */ |
| outb(initio_rate_tbl[active_tc->flags & TCF_SCSI_RATE], host->addr + TUL_SFifo); |
| outb(MAX_OFFSET, host->addr + TUL_SFifo); /* REQ/ACK offset */ |
| } |
| outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); |
| if (wait_tulip(host) == -1) |
| return -1; |
| } |
| outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); |
| outb((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)), host->addr + TUL_SSignal); |
| /* Into before CDB xfer */ |
| return 3; |
| } |
| |
| |
| /** |
| * initio_state_2 - SCSI state machine |
| * @host: InitIO host we are controlling |
| * |
| * state after selection with attention |
| * state after selection with attention3 |
| */ |
| |
| static int initio_state_2(struct initio_host * host) |
| { |
| struct scsi_ctrl_blk *scb = host->active; |
| struct target_control *active_tc = host->active_tc; |
| #if DEBUG_STATE |
| printk("-s2-"); |
| #endif |
| |
| initio_unlink_pend_scb(host, scb); |
| initio_append_busy_scb(host, scb); |
| |
| outb(active_tc->sconfig0, host->addr + TUL_SConfig); |
| |
| if (host->jsstatus1 & TSS_CMD_PH_CMP) |
| return 4; |
| |
| outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); |
| outb((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)), host->addr + TUL_SSignal); |
| /* Into before CDB xfer */ |
| return 3; |
| } |
| |
| /** |
| * initio_state_3 - SCSI state machine |
| * @host: InitIO host we are controlling |
| * |
| * state before CDB xfer is done |
| */ |
| |
| static int initio_state_3(struct initio_host * host) |
| { |
| struct scsi_ctrl_blk *scb = host->active; |
| struct target_control *active_tc = host->active_tc; |
| int i; |
| |
| #if DEBUG_STATE |
| printk("-s3-"); |
| #endif |
| for (;;) { |
| switch (host->phase) { |
| case CMD_OUT: /* Command out phase */ |
| for (i = 0; i < (int) scb->cdblen; i++) |
| outb(scb->cdb[i], host->addr + TUL_SFifo); |
| outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); |
| if (wait_tulip(host) == -1) |
| return -1; |
| if (host->phase == CMD_OUT) |
| return initio_bad_seq(host); |
| return 4; |
| |
| case MSG_IN: /* Message in phase */ |
| scb->next_state = 3; |
| if (initio_msgin(host) == -1) |
| return -1; |
| break; |
| |
| case STATUS_IN: /* Status phase */ |
| if (initio_status_msg(host) == -1) |
| return -1; |
| break; |
| |
| case MSG_OUT: /* Message out phase */ |
| if (active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) { |
| outb(NOP, host->addr + TUL_SFifo); /* msg nop */ |
| outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); |
| if (wait_tulip(host) == -1) |
| return -1; |
| } else { |
| active_tc->flags |= TCF_SYNC_DONE; |
| |
| outb(EXTENDED_MESSAGE, host->addr + TUL_SFifo); |
| outb(3, host->addr + TUL_SFifo); /* ext. msg len */ |
| outb(EXTENDED_SDTR, host->addr + TUL_SFifo); /* sync request */ |
| outb(initio_rate_tbl[active_tc->flags & TCF_SCSI_RATE], host->addr + TUL_SFifo); |
| outb(MAX_OFFSET, host->addr + TUL_SFifo); /* REQ/ACK offset */ |
| outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); |
| if (wait_tulip(host) == -1) |
| return -1; |
| outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); |
| outb(inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7), host->addr + TUL_SSignal); |
| |
| } |
| break; |
| default: |
| return initio_bad_seq(host); |
| } |
| } |
| } |
| |
| /** |
| * initio_state_4 - SCSI state machine |
| * @host: InitIO host we are controlling |
| * |
| * SCSI state machine. State 4 |
| */ |
| |
| static int initio_state_4(struct initio_host * host) |
| { |
| struct scsi_ctrl_blk *scb = host->active; |
| |
| #if DEBUG_STATE |
| printk("-s4-"); |
| #endif |
| if ((scb->flags & SCF_DIR) == SCF_NO_XF) { |
| return 6; /* Go to state 6 (After data) */ |
| } |
| for (;;) { |
| if (scb->buflen == 0) |
| return 6; |
| |
| switch (host->phase) { |
| |
| case STATUS_IN: /* Status phase */ |
| if ((scb->flags & SCF_DIR) != 0) /* if direction bit set then report data underrun */ |
| scb->hastat = HOST_DO_DU; |
| if ((initio_status_msg(host)) == -1) |
| return -1; |
| break; |
| |
| case MSG_IN: /* Message in phase */ |
| scb->next_state = 0x4; |
| if (initio_msgin(host) == -1) |
| return -1; |
| break; |
| |
| case MSG_OUT: /* Message out phase */ |
| if (host->jsstatus0 & TSS_PAR_ERROR) { |
| scb->buflen = 0; |
| scb->hastat = HOST_DO_DU; |
| if (initio_msgout_ide(host) == -1) |
| return -1; |
| return 6; |
| } else { |
| outb(NOP, host->addr + TUL_SFifo); /* msg nop */ |
| outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); |
| if (wait_tulip(host) == -1) |
| return -1; |
| } |
| break; |
| |
| case DATA_IN: /* Data in phase */ |
| return initio_xfer_data_in(host); |
| |
| case DATA_OUT: /* Data out phase */ |
| return initio_xfer_data_out(host); |
| |
| default: |
| return initio_bad_seq(host); |
| } |
| } |
| } |
| |
| |
| /** |
| * initio_state_5 - SCSI state machine |
| * @host: InitIO host we are controlling |
| * |
| * State after dma xfer done or phase change before xfer done |
| */ |
| |
| static int initio_state_5(struct initio_host * host) |
| { |
| struct scsi_ctrl_blk *scb = host->active; |
| long cnt, xcnt; /* cannot use unsigned !! code: if (xcnt < 0) */ |
| |
| #if DEBUG_STATE |
| printk("-s5-"); |
| #endif |
| /*------ get remaining count -------*/ |
| cnt = inl(host->addr + TUL_SCnt0) & 0x0FFFFFF; |
| |
| if (inb(host->addr + TUL_XCmd) & 0x20) { |
| /* ----------------------- DATA_IN ----------------------------- */ |
| /* check scsi parity error */ |
| if (host->jsstatus0 & TSS_PAR_ERROR) |
| scb->hastat = HOST_DO_DU; |
| if (inb(host->addr + TUL_XStatus) & XPEND) { /* DMA xfer pending, Send STOP */ |
| /* tell Hardware scsi xfer has been terminated */ |
| outb(inb(host->addr + TUL_XCtrl) | 0x80, host->addr + TUL_XCtrl); |
| /* wait until DMA xfer not pending */ |
| while (inb(host->addr + TUL_XStatus) & XPEND) |
| cpu_relax(); |
| } |
| } else { |
| /*-------- DATA OUT -----------*/ |
| if ((inb(host->addr + TUL_SStatus1) & TSS_XFER_CMP) == 0) { |
| if (host->active_tc->js_period & TSC_WIDE_SCSI) |
| cnt += (inb(host->addr + TUL_SFifoCnt) & 0x1F) << 1; |
| else |
| cnt += (inb(host->addr + TUL_SFifoCnt) & 0x1F); |
| } |
| if (inb(host->addr + TUL_XStatus) & XPEND) { /* if DMA xfer is pending, abort DMA xfer */ |
| outb(TAX_X_ABT, host->addr + TUL_XCmd); |
| /* wait Abort DMA xfer done */ |
| while ((inb(host->addr + TUL_Int) & XABT) == 0) |
| cpu_relax(); |
| } |
| if ((cnt == 1) && (host->phase == DATA_OUT)) { |
| outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); |
| if (wait_tulip(host) == -1) |
| return -1; |
| cnt = 0; |
| } else { |
| if ((inb(host->addr + TUL_SStatus1) & TSS_XFER_CMP) == 0) |
| outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); |
| } |
| } |
| if (cnt == 0) { |
| scb->buflen = 0; |
| return 6; /* After Data */ |
| } |
| /* Update active data pointer */ |
| xcnt = (long) scb->buflen - cnt; /* xcnt== bytes already xferred */ |
| scb->buflen = (u32) cnt; /* cnt == bytes left to be xferred */ |
| if (scb->flags & SCF_SG) { |
| struct sg_entry *sgp; |
| unsigned long i; |
| |
| sgp = &scb->sglist[scb->sgidx]; |
| for (i = scb->sgidx; i < scb->sgmax; sgp++, i++) { |
| xcnt -= (long) sgp->len; |
| if (xcnt < 0) { /* this sgp xfer half done */ |
| xcnt += (long) sgp->len; /* xcnt == bytes xferred in this sgp */ |
| sgp->data += (u32) xcnt; /* new ptr to be xfer */ |
| sgp->len -= (u32) xcnt; /* new len to be xfer */ |
| scb->bufptr += ((u32) (i - scb->sgidx) << 3); |
| /* new SG table ptr */ |
| scb->sglen = (u8) (scb->sgmax - i); |
| /* new SG table len */ |
| scb->sgidx = (u16) i; |
| /* for next disc and come in this loop */ |
| return 4; /* Go to state 4 */ |
| } |
| /* else (xcnt >= 0 , i.e. this sgp already xferred */ |
| } /* for */ |
| return 6; /* Go to state 6 */ |
| } else { |
| scb->bufptr += (u32) xcnt; |
| } |
| return 4; /* Go to state 4 */ |
| } |
| |
| /** |
| * initio_state_6 - SCSI state machine |
| * @host: InitIO host we are controlling |
| * |
| * State after Data phase |
| */ |
| |
| static int initio_state_6(struct initio_host * host) |
| { |
| struct scsi_ctrl_blk *scb = host->active; |
| |
| #if DEBUG_STATE |
| printk("-s6-"); |
| #endif |
| for (;;) { |
| switch (host->phase) { |
| case STATUS_IN: /* Status phase */ |
| if ((initio_status_msg(host)) == -1) |
| return -1; |
| break; |
| |
| case MSG_IN: /* Message in phase */ |
| scb->next_state = 6; |
| if ((initio_msgin(host)) == -1) |
| return -1; |
| break; |
| |
| case MSG_OUT: /* Message out phase */ |
| outb(NOP, host->addr + TUL_SFifo); /* msg nop */ |
| outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); |
| if (wait_tulip(host) == -1) |
| return -1; |
| break; |
| |
| case DATA_IN: /* Data in phase */ |
| return initio_xpad_in(host); |
| |
| case DATA_OUT: /* Data out phase */ |
| return initio_xpad_out(host); |
| |
| default: |
| return initio_bad_seq(host); |
| } |
| } |
| } |
| |
| /** |
| * initio_state_7 - SCSI state machine |
| * @host: InitIO host we are controlling |
| * |
| */ |
| |
| static int initio_state_7(struct initio_host * host) |
| { |
| int cnt, i; |
| |
| #if DEBUG_STATE |
| printk("-s7-"); |
| #endif |
| /* flush SCSI FIFO */ |
| cnt = inb(host->addr + TUL_SFifoCnt) & 0x1F; |
| if (cnt) { |
| for (i = 0; i < cnt; i++) |
| inb(host->addr + TUL_SFifo); |
| } |
| switch (host->phase) { |
| case DATA_IN: /* Data in phase */ |
| case DATA_OUT: /* Data out phase */ |
| return initio_bad_seq(host); |
| default: |
| return 6; /* Go to state 6 */ |
| } |
| } |
| |
| /** |
| * initio_xfer_data_in - Commence data input |
| * @host: InitIO host in use |
| * |
| * Commence a block of data transfer. The transfer itself will |
| * be managed by the controller and we will get a completion (or |
| * failure) interrupt. |
| */ |
| static int initio_xfer_data_in(struct initio_host * host) |
| { |
| struct scsi_ctrl_blk *scb = host->active; |
| |
| if ((scb->flags & SCF_DIR) == SCF_DOUT) |
| return 6; /* wrong direction */ |
| |
| outl(scb->buflen, host->addr + TUL_SCnt0); |
| outb(TSC_XF_DMA_IN, host->addr + TUL_SCmd); /* 7/25/95 */ |
| |
| if (scb->flags & SCF_SG) { /* S/G xfer */ |
| outl(((u32) scb->sglen) << 3, host->addr + TUL_XCntH); |
| outl(scb->bufptr, host->addr + TUL_XAddH); |
| outb(TAX_SG_IN, host->addr + TUL_XCmd); |
| } else { |
| outl(scb->buflen, host->addr + TUL_XCntH); |
| outl(scb->bufptr, host->addr + TUL_XAddH); |
| outb(TAX_X_IN, host->addr + TUL_XCmd); |
| } |
| scb->next_state = 0x5; |
| return 0; /* return to OS, wait xfer done , let jas_isr come in */ |
| } |
| |
| /** |
| * initio_xfer_data_out - Commence data output |
| * @host: InitIO host in use |
| * |
| * Commence a block of data transfer. The transfer itself will |
| * be managed by the controller and we will get a completion (or |
| * failure) interrupt. |
| */ |
| |
| static int initio_xfer_data_out(struct initio_host * host) |
| { |
| struct scsi_ctrl_blk *scb = host->active; |
| |
| if ((scb->flags & SCF_DIR) == SCF_DIN) |
| return 6; /* wrong direction */ |
| |
| outl(scb->buflen, host->addr + TUL_SCnt0); |
| outb(TSC_XF_DMA_OUT, host->addr + TUL_SCmd); |
| |
| if (scb->flags & SCF_SG) { /* S/G xfer */ |
| outl(((u32) scb->sglen) << 3, host->addr + TUL_XCntH); |
| outl(scb->bufptr, host->addr + TUL_XAddH); |
| outb(TAX_SG_OUT, host->addr + TUL_XCmd); |
| } else { |
| outl(scb->buflen, host->addr + TUL_XCntH); |
| outl(scb->bufptr, host->addr + TUL_XAddH); |
| outb(TAX_X_OUT, host->addr + TUL_XCmd); |
| } |
| |
| scb->next_state = 0x5; |
| return 0; /* return to OS, wait xfer done , let jas_isr come in */ |
| } |
| |
| int initio_xpad_in(struct initio_host * host) |
| { |
| struct scsi_ctrl_blk *scb = host->active; |
| struct target_control *active_tc = host->active_tc; |
| |
| if ((scb->flags & SCF_DIR) != SCF_NO_DCHK) |
| scb->hastat = HOST_DO_DU; /* over run */ |
| for (;;) { |
| if (active_tc->js_period & TSC_WIDE_SCSI) |
| outl(2, host->addr + TUL_SCnt0); |
| else |
| outl(1, host->addr + TUL_SCnt0); |
| |
| outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd); |
| if (wait_tulip(host) == -1) |
| return -1; |
| if (host->phase != DATA_IN) { |
| outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); |
| return 6; |
| } |
| inb(host->addr + TUL_SFifo); |
| } |
| } |
| |
| int initio_xpad_out(struct initio_host * host) |
| { |
| struct scsi_ctrl_blk *scb = host->active; |
| struct target_control *active_tc = host->active_tc; |
| |
| if ((scb->flags & SCF_DIR) != SCF_NO_DCHK) |
| scb->hastat = HOST_DO_DU; /* over run */ |
| for (;;) { |
| if (active_tc->js_period & TSC_WIDE_SCSI) |
| outl(2, host->addr + TUL_SCnt0); |
| else |
| outl(1, host->addr + TUL_SCnt0); |
| |
| outb(0, host->addr + TUL_SFifo); |
| outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); |
| if ((wait_tulip(host)) == -1) |
| return -1; |
| if (host->phase != DATA_OUT) { /* Disable wide CPU to allow read 16 bits */ |
| outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); |
| outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); |
| return 6; |
| } |
| } |
| } |
| |
| int initio_status_msg(struct initio_host * host) |
| { /* status & MSG_IN */ |
| struct scsi_ctrl_blk *scb = host->active; |
| u8 msg; |
| |
| outb(TSC_CMD_COMP, host->addr + TUL_SCmd); |
| if (wait_tulip(host) == -1) |
| return -1; |
| |
| /* get status */ |
| scb->tastat = inb(host->addr + TUL_SFifo); |
| |
| if (host->phase == MSG_OUT) { |
| if (host->jsstatus0 & TSS_PAR_ERROR) |
| outb(MSG_PARITY_ERROR, host->addr + TUL_SFifo); |
| else |
| outb(NOP, host->addr + TUL_SFifo); |
| outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); |
| return wait_tulip(host); |
| } |
| if (host->phase == MSG_IN) { |
| msg = inb(host->addr + TUL_SFifo); |
| if (host->jsstatus0 & TSS_PAR_ERROR) { /* Parity error */ |
| if ((initio_msgin_accept(host)) == -1) |
| return -1; |
| if (host->phase != MSG_OUT) |
| return initio_bad_seq(host); |
| outb(MSG_PARITY_ERROR, host->addr + TUL_SFifo); |
| outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); |
| return wait_tulip(host); |
| } |
| if (msg == 0) { /* Command complete */ |
| |
| if ((scb->tastat & 0x18) == 0x10) /* No link support */ |
| return initio_bad_seq(host); |
| outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); |
| outb(TSC_MSG_ACCEPT, host->addr + TUL_SCmd); |
| return initio_wait_done_disc(host); |
| |
| } |
| if (msg == LINKED_CMD_COMPLETE || |
| msg == LINKED_FLG_CMD_COMPLETE) { |
| if ((scb->tastat & 0x18) == 0x10) |
| return initio_msgin_accept(host); |
| } |
| } |
| return initio_bad_seq(host); |
| } |
| |
| |
| /* scsi bus free */ |
| int int_initio_busfree(struct initio_host * host) |
| { |
| struct scsi_ctrl_blk *scb = host->active; |
| |
| if (scb != NULL) { |
| if (scb->status & SCB_SELECT) { /* selection timeout */ |
| initio_unlink_pend_scb(host, scb); |
| scb->hastat = HOST_SEL_TOUT; |
| initio_append_done_scb(host, scb); |
| } else { /* Unexpected bus free */ |
| initio_unlink_busy_scb(host, scb); |
| scb->hastat = HOST_BUS_FREE; |
| initio_append_done_scb(host, scb); |
| } |
| host->active = NULL; |
| host->active_tc = NULL; |
| } |
| outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */ |
| outb(TSC_INITDEFAULT, host->addr + TUL_SConfig); |
| outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */ |
| return -1; |
| } |
| |
| |
| /** |
| * int_initio_scsi_rst - SCSI reset occurred |
| * @host: Host seeing the reset |
| * |
| * A SCSI bus reset has occurred. Clean up any pending transfer |
| * the hardware is doing by DMA and then abort all active and |
| * disconnected commands. The mid layer should sort the rest out |
| * for us |
| */ |
| |
| static int int_initio_scsi_rst(struct initio_host * host) |
| { |
| struct scsi_ctrl_blk *scb; |
| int i; |
| |
| /* if DMA xfer is pending, abort DMA xfer */ |
| if (inb(host->addr + TUL_XStatus) & 0x01) { |
| outb(TAX_X_ABT | TAX_X_CLR_FIFO, host->addr + TUL_XCmd); |
| /* wait Abort DMA xfer done */ |
| while ((inb(host->addr + TUL_Int) & 0x04) == 0) |
| cpu_relax(); |
| outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); |
| } |
| /* Abort all active & disconnected scb */ |
| while ((scb = initio_pop_busy_scb(host)) != NULL) { |
| scb->hastat = HOST_BAD_PHAS; |
| initio_append_done_scb(host, scb); |
| } |
| host->active = NULL; |
| host->active_tc = NULL; |
| |
| /* clr sync nego. done flag */ |
| for (i = 0; i < host->max_tar; i++) |
| host->targets[i].flags &= ~(TCF_SYNC_DONE | TCF_WDTR_DONE); |
| return -1; |
| } |
| |
| /** |
| * int_initio_resel - Reselection occurred |
| * @host: InitIO host adapter |
| * |
| * A SCSI reselection event has been signalled and the interrupt |
| * is now being processed. Work out which command block needs attention |
| * and continue processing that command. |
| */ |
| |
| int int_initio_resel(struct initio_host * host) |
| { |
| struct scsi_ctrl_blk *scb; |
| struct target_control *active_tc; |
| u8 tag, msg = 0; |
| u8 tar, lun; |
| |
| if ((scb = host->active) != NULL) { |
| /* FIXME: Why check and not just clear ? */ |
| if (scb->status & SCB_SELECT) /* if waiting for selection complete */ |
| scb->status &= ~SCB_SELECT; |
| host->active = NULL; |
| } |
| /* --------- get target id---------------------- */ |
| tar = inb(host->addr + TUL_SBusId); |
| /* ------ get LUN from Identify message----------- */ |
| lun = inb(host->addr + TUL_SIdent) & 0x0F; |
| /* 07/22/98 from 0x1F -> 0x0F */ |
| active_tc = &host->targets[tar]; |
| host->active_tc = active_tc; |
| outb(active_tc->sconfig0, host->addr + TUL_SConfig); |
| outb(active_tc->js_period, host->addr + TUL_SPeriod); |
| |
| /* ------------- tag queueing ? ------------------- */ |
| if (active_tc->drv_flags & TCF_DRV_EN_TAG) { |
| if ((initio_msgin_accept(host)) == -1) |
| return -1; |
| if (host->phase != MSG_IN) |
| goto no_tag; |
| outl(1, host->addr + TUL_SCnt0); |
| outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd); |
| if (wait_tulip(host) == -1) |
| return -1; |
| msg = inb(host->addr + TUL_SFifo); /* Read Tag Message */ |
| |
| if (msg < SIMPLE_QUEUE_TAG || msg > ORDERED_QUEUE_TAG) |
| /* Is simple Tag */ |
| goto no_tag; |
| |
| if (initio_msgin_accept(host) == -1) |
| return -1; |
| |
| if (host->phase != MSG_IN) |
| goto no_tag; |
| |
| outl(1, host->addr + TUL_SCnt0); |
| outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd); |
| if (wait_tulip(host) == -1) |
| return -1; |
| tag = inb(host->addr + TUL_SFifo); /* Read Tag ID */ |
| scb = host->scb + tag; |
| if (scb->target != tar || scb->lun != lun) { |
| return initio_msgout_abort_tag(host); |
| } |
| if (scb->status != SCB_BUSY) { /* 03/24/95 */ |
| return initio_msgout_abort_tag(host); |
| } |
| host->active = scb; |
| if ((initio_msgin_accept(host)) == -1) |
| return -1; |
| } else { /* No tag */ |
| no_tag: |
| if ((scb = initio_find_busy_scb(host, tar | (lun << 8))) == NULL) { |
| return initio_msgout_abort_targ(host); |
| } |
| host->active = scb; |
| if (!(active_tc->drv_flags & TCF_DRV_EN_TAG)) { |
| if ((initio_msgin_accept(host)) == -1) |
| return -1; |
| } |
| } |
| return 0; |
| } |
| |
| /** |
| * int_initio_bad_seq - out of phase |
| * @host: InitIO host flagging event |
| * |
| * We have ended up out of phase somehow. Reset the host controller |
| * and throw all our toys out of the pram. Let the midlayer clean up |
| */ |
| |
| static int int_initio_bad_seq(struct initio_host * host) |
| { /* target wrong phase */ |
| struct scsi_ctrl_blk *scb; |
| int i; |
| |
| initio_reset_scsi(host, 10); |
| |
| while ((scb = initio_pop_busy_scb(host)) != NULL) { |
| scb->hastat = HOST_BAD_PHAS; |
| initio_append_done_scb(host, scb); |
| } |
| for (i = 0; i < host->max_tar; i++) |
| host->targets[i].flags &= ~(TCF_SYNC_DONE | TCF_WDTR_DONE); |
| return -1; |
| } |
| |
| |
| /** |
| * initio_msgout_abort_targ - abort a tag |
| * @host: InitIO host |
| * |
| * Abort when the target/lun does not match or when our SCB is not |
| * busy. Used by untagged commands. |
| */ |
| |
| static int initio_msgout_abort_targ(struct initio_host * host) |
| { |
| |
| outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal); |
| if (initio_msgin_accept(host) == -1) |
| return -1; |
| if (host->phase != MSG_OUT) |
| return initio_bad_seq(host); |
| |
| outb(ABORT_TASK_SET, host->addr + TUL_SFifo); |
| outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); |
| |
| return initio_wait_disc(host); |
| } |
| |
| /** |
| * initio_msgout_abort_tag - abort a tag |
| * @host: InitIO host |
| * |
| * Abort when the target/lun does not match or when our SCB is not |
| * busy. Used for tagged commands. |
| */ |
| |
| static int initio_msgout_abort_tag(struct initio_host * host) |
| { |
| |
| outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal); |
| if (initio_msgin_accept(host) == -1) |
| return -1; |
| if (host->phase != MSG_OUT) |
| return initio_bad_seq(host); |
| |
| outb(ABORT_TASK, host->addr + TUL_SFifo); |
| outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); |
| |
| return initio_wait_disc(host); |
| |
| } |
| |
| /** |
| * initio_msgin - Message in |
| * @host: InitIO Host |
| * |
| * Process incoming message |
| */ |
| static int initio_msgin(struct initio_host * host) |
| { |
| struct target_control *active_tc; |
| |
| for (;;) { |
| outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); |
| |
| outl(1, host->addr + TUL_SCnt0); |
| outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd); |
| if (wait_tulip(host) == -1) |
| return -1; |
| |
| switch (inb(host->addr + TUL_SFifo)) { |
| case DISCONNECT: /* Disconnect msg */ |
| outb(TSC_MSG_ACCEPT, host->addr + TUL_SCmd); |
| return initio_wait_disc(host); |
| case SAVE_POINTERS: |
| case RESTORE_POINTERS: |
| case NOP: |
| initio_msgin_accept(host); |
| break; |
| case MESSAGE_REJECT: /* Clear ATN first */ |
| outb((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)), |
| host->addr + TUL_SSignal); |
| active_tc = host->active_tc; |
| if ((active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) == 0) /* do sync nego */ |
| outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), |
| host->addr + TUL_SSignal); |
| initio_msgin_accept(host); |
| break; |
| case EXTENDED_MESSAGE: /* extended msg */ |
| initio_msgin_extend(host); |
| break; |
| case IGNORE_WIDE_RESIDUE: |
| initio_msgin_accept(host); |
| break; |
| case COMMAND_COMPLETE: |
| outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); |
| outb(TSC_MSG_ACCEPT, host->addr + TUL_SCmd); |
| return initio_wait_done_disc(host); |
| default: |
| initio_msgout_reject(host); |
| break; |
| } |
| if (host->phase != MSG_IN) |
| return host->phase; |
| } |
| /* statement won't reach here */ |
| } |
| |
| static int initio_msgout_reject(struct initio_host * host) |
| { |
| outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal); |
| |
| if (initio_msgin_accept(host) == -1) |
| return -1; |
| |
| if (host->phase == MSG_OUT) { |
| outb(MESSAGE_REJECT, host->addr + TUL_SFifo); /* Msg reject */ |
| outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); |
| return wait_tulip(host); |
| } |
| return host->phase; |
| } |
| |
| static int initio_msgout_ide(struct initio_host * host) |
| { |
| outb(INITIATOR_ERROR, host->addr + TUL_SFifo); /* Initiator Detected Error */ |
| outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); |
| return wait_tulip(host); |
| } |
| |
| static int initio_msgin_extend(struct initio_host * host) |
| { |
| u8 len, idx; |
| |
| if (initio_msgin_accept(host) != MSG_IN) |
| return host->phase; |
| |
| /* Get extended msg length */ |
| outl(1, host->addr + TUL_SCnt0); |
| outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd); |
| if (wait_tulip(host) == -1) |
| return -1; |
| |
| len = inb(host->addr + TUL_SFifo); |
| host->msg[0] = len; |
| for (idx = 1; len != 0; len--) { |
| |
| if ((initio_msgin_accept(host)) != MSG_IN) |
| return host->phase; |
| outl(1, host->addr + TUL_SCnt0); |
| outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd); |
| if (wait_tulip(host) == -1) |
| return -1; |
| host->msg[idx++] = inb(host->addr + TUL_SFifo); |
| } |
| if (host->msg[1] == 1) { /* if it's synchronous data transfer request */ |
| u8 r; |
| if (host->msg[0] != 3) /* if length is not right */ |
| return initio_msgout_reject(host); |
| if (host->active_tc->flags & TCF_NO_SYNC_NEGO) { /* Set OFFSET=0 to do async, nego back */ |
| host->msg[3] = 0; |
| } else { |
| if (initio_msgin_sync(host) == 0 && |
| (host->active_tc->flags & TCF_SYNC_DONE)) { |
| initio_sync_done(host); |
| return initio_msgin_accept(host); |
| } |
| } |
| |
| r = inb(host->addr + TUL_SSignal); |
| outb((r & (TSC_SET_ACK | 7)) | TSC_SET_ATN, |
| host->addr + TUL_SSignal); |
| if (initio_msgin_accept(host) != MSG_OUT) |
| return host->phase; |
| /* sync msg out */ |
| outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); |
| |
| initio_sync_done(host); |
| |
| outb(EXTENDED_MESSAGE, host->addr + TUL_SFifo); |
| outb(3, host->addr + TUL_SFifo); |
| outb(EXTENDED_SDTR, host->addr + TUL_SFifo); |
| outb(host->msg[2], host->addr + TUL_SFifo); |
| outb(host->msg[3], host->addr + TUL_SFifo); |
| outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); |
| return wait_tulip(host); |
| } |
| if (host->msg[0] != 2 || host->msg[1] != 3) |
| return initio_msgout_reject(host); |
| /* if it's WIDE DATA XFER REQ */ |
| if (host->active_tc->flags & TCF_NO_WDTR) { |
| host->msg[2] = 0; |
| } else { |
| if (host->msg[2] > 2) /* > 32 bits */ |
| return initio_msgout_reject(host); |
| if (host->msg[2] == 2) { /* == 32 */ |
| host->msg[2] = 1; |
| } else { |
| if ((host->active_tc->flags & TCF_NO_WDTR) == 0) { |
| wdtr_done(host); |
| if ((host->active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) == 0) |
| outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal); |
| return initio_msgin_accept(host); |
| } |
| } |
| } |
| outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal); |
| |
| if (initio_msgin_accept(host) != MSG_OUT) |
| return host->phase; |
| /* WDTR msg out */ |
| outb(EXTENDED_MESSAGE, host->addr + TUL_SFifo); |
| outb(2, host->addr + TUL_SFifo); |
| outb(EXTENDED_WDTR, host->addr + TUL_SFifo); |
| outb(host->msg[2], host->addr + TUL_SFifo); |
| outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); |
| return wait_tulip(host); |
| } |
| |
| static int initio_msgin_sync(struct initio_host * host) |
| { |
| char default_period; |
| |
| default_period = initio_rate_tbl[host->active_tc->flags & TCF_SCSI_RATE]; |
| if (host->msg[3] > MAX_OFFSET) { |
| host->msg[3] = MAX_OFFSET; |
| if (host->msg[2] < default_period) { |
| host->msg[2] = default_period; |
| return 1; |
| } |
| if (host->msg[2] >= 59) /* Change to async */ |
| host->msg[3] = 0; |
| return 1; |
| } |
| /* offset requests asynchronous transfers ? */ |
| if (host->msg[3] == 0) { |
| return 0; |
| } |
| if (host->msg[2] < default_period) { |
| host->msg[2] = default_period; |
| return 1; |
| } |
| if (host->msg[2] >= 59) { |
| host->msg[3] = 0; |
| return 1; |
| } |
| return 0; |
| } |
| |
| static int wdtr_done(struct initio_host * host) |
| { |
| host->active_tc->flags &= ~TCF_SYNC_DONE; |
| host->active_tc->flags |= TCF_WDTR_DONE; |
| |
| host->active_tc->js_period = 0; |
| if (host->msg[2]) /* if 16 bit */ |
| host->active_tc->js_period |= TSC_WIDE_SCSI; |
| host->active_tc->sconfig0 &= ~TSC_ALT_PERIOD; |
| outb(host->active_tc->sconfig0, host->addr + TUL_SConfig); |
| outb(host->active_tc->js_period, host->addr + TUL_SPeriod); |
| |
| return 1; |
| } |
| |
| static int initio_sync_done(struct initio_host * host) |
| { |
| int i; |
| |
| host->active_tc->flags |= TCF_SYNC_DONE; |
| |
| if (host->msg[3]) { |
| host->active_tc->js_period |= host->msg[3]; |
| for (i = 0; i < 8; i++) { |
| if (initio_rate_tbl[i] >= host->msg[2]) /* pick the big one */ |
| break; |
| } |
| host->active_tc->js_period |= (i << 4); |
| host->active_tc->sconfig0 |= TSC_ALT_PERIOD; |
| } |
| outb(host->active_tc->sconfig0, host->addr + TUL_SConfig); |
| outb(host->active_tc->js_period, host->addr + TUL_SPeriod); |
| |
| return -1; |
| } |
| |
| |
| static int initio_post_scsi_rst(struct initio_host * host) |
| { |
| struct scsi_ctrl_blk *scb; |
| struct target_control *active_tc; |
| int i; |
| |
| host->active = NULL; |
| host->active_tc = NULL; |
| host->flags = 0; |
| |
| while ((scb = initio_pop_busy_scb(host)) != NULL) { |
| scb->hastat = HOST_BAD_PHAS; |
| initio_append_done_scb(host, scb); |
| } |
| /* clear sync done flag */ |
| active_tc = &host->targets[0]; |
| for (i = 0; i < host->max_tar; active_tc++, i++) { |
| active_tc->flags &= ~(TCF_SYNC_DONE | TCF_WDTR_DONE); |
| /* Initialize the sync. xfer register values to an asyn xfer */ |
| active_tc->js_period = 0; |
| active_tc->sconfig0 = host->sconf1; |
| host->act_tags[0] = 0; /* 07/22/98 */ |
| host->targets[i].flags &= ~TCF_BUSY; /* 07/22/98 */ |
| } /* for */ |
| |
| return -1; |
| } |
| |
| static void initio_select_atn_stop(struct initio_host * host, struct scsi_ctrl_blk * scb) |
| { |
| scb->status |= SCB_SELECT; |
| scb->next_state = 0x1; |
| host->active = scb; |
| host->active_tc = &host->targets[scb->target]; |
| outb(TSC_SELATNSTOP, host->addr + TUL_SCmd); |
| } |
| |
| |
| static void initio_select_atn(struct initio_host * host, struct scsi_ctrl_blk * scb) |
| { |
| int i; |
| |
| scb->status |= SCB_SELECT; |
| scb->next_state = 0x2; |
| |
| outb(scb->ident, host->addr + TUL_SFifo); |
| for (i = 0; i < (int) scb->cdblen; i++) |
| outb(scb->cdb[i], host->addr + TUL_SFifo); |
| host->active_tc = &host->targets[scb->target]; |
| host->active = scb; |
| outb(TSC_SEL_ATN, host->addr + TUL_SCmd); |
| } |
| |
| static void initio_select_atn3(struct initio_host * host, struct scsi_ctrl_blk * scb) |
| { |
| int i; |
| |
| scb->status |= SCB_SELECT; |
| scb->next_state = 0x2; |
| |
| outb(scb->ident, host->addr + TUL_SFifo); |
| outb(scb->tagmsg, host->addr + TUL_SFifo); |
| outb(scb->tagid, host->addr + TUL_SFifo); |
| for (i = 0; i < scb->cdblen; i++) |
| outb(scb->cdb[i], host->addr + TUL_SFifo); |
| host->active_tc = &host->targets[scb->target]; |
| host->active = scb; |
| outb(TSC_SEL_ATN3, host->addr + TUL_SCmd); |
| } |
| |
| /** |
| * initio_bus_device_reset - SCSI Bus Device Reset |
| * @host: InitIO host to reset |
| * |
| * Perform a device reset and abort all pending SCBs for the |
| * victim device |
| */ |
| int initio_bus_device_reset(struct initio_host * host) |
| { |
| struct scsi_ctrl_blk *scb = host->active; |
| struct target_control *active_tc = host->active_tc; |
| struct scsi_ctrl_blk *tmp, *prev; |
| u8 tar; |
| |
| if (host->phase != MSG_OUT) |
| return int_initio_bad_seq(host); /* Unexpected phase */ |
| |
| initio_unlink_pend_scb(host, scb); |
| initio_release_scb(host, scb); |
| |
| |
| tar = scb->target; /* target */ |
| active_tc->flags &= ~(TCF_SYNC_DONE | TCF_WDTR_DONE | TCF_BUSY); |
| /* clr sync. nego & WDTR flags 07/22/98 */ |
| |
| /* abort all SCB with same target */ |
| prev = tmp = host->first_busy; /* Check Busy queue */ |
| while (tmp != NULL) { |
| if (tmp->target == tar) { |
| /* unlink it */ |
| if (tmp == host->first_busy) { |
| if ((host->first_busy = tmp->next) == NULL) |
| host->last_busy = NULL; |
| } else { |
| prev->next = tmp->next; |
| if (tmp == host->last_busy) |
| host->last_busy = prev; |
| } |
| tmp->hastat = HOST_ABORTED; |
| initio_append_done_scb(host, tmp); |
| } |
| /* Previous haven't change */ |
| else { |
| prev = tmp; |
| } |
| tmp = tmp->next; |
| } |
| outb(TARGET_RESET, host->addr + TUL_SFifo); |
| outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd); |
| return initio_wait_disc(host); |
| |
| } |
| |
| static int initio_msgin_accept(struct initio_host * host) |
| { |
| outb(TSC_MSG_ACCEPT, host->addr + TUL_SCmd); |
| return wait_tulip(host); |
| } |
| |
| static int wait_tulip(struct initio_host * host) |
| { |
| |
| while (!((host->jsstatus0 = inb(host->addr + TUL_SStatus0)) |
| & TSS_INT_PENDING)) |
| cpu_relax(); |
| |
| host->jsint = inb(host->addr + TUL_SInt); |
| host->phase = host->jsstatus0 & TSS_PH_MASK; |
| host->jsstatus1 = inb(host->addr + TUL_SStatus1); |
| |
| if (host->jsint & TSS_RESEL_INT) /* if SCSI bus reset detected */ |
| return int_initio_resel(host); |
| if (host->jsint & TSS_SEL_TIMEOUT) /* if selected/reselected timeout interrupt */ |
| return int_initio_busfree(host); |
| if (host->jsint & TSS_SCSIRST_INT) /* if SCSI bus reset detected */ |
| return int_initio_scsi_rst(host); |
| |
| if (host->jsint & TSS_DISC_INT) { /* BUS disconnection */ |
| if (host->flags & HCF_EXPECT_DONE_DISC) { |
| outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */ |
| initio_unlink_busy_scb(host, host->active); |
| host->active->hastat = 0; |
| initio_append_done_scb(host, host->active); |
| host->active = NULL; |
| host->active_tc = NULL; |
| host->flags &= ~HCF_EXPECT_DONE_DISC; |
| outb(TSC_INITDEFAULT, host->addr + TUL_SConfig); |
| outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */ |
| return -1; |
| } |
| if (host->flags & HCF_EXPECT_DISC) { |
| outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */ |
| host->active = NULL; |
| host->active_tc = NULL; |
| host->flags &= ~HCF_EXPECT_DISC; |
| outb(TSC_INITDEFAULT, host->addr + TUL_SConfig); |
| outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */ |
| return -1; |
| } |
| return int_initio_busfree(host); |
| } |
| /* The old code really does the below. Can probably be removed */ |
| if (host->jsint & (TSS_FUNC_COMP | TSS_BUS_SERV)) |
| return host->phase; |
| return host->phase; |
| } |
| |
| static int initio_wait_disc(struct initio_host * host) |
| { |
| while (!((host->jsstatus0 = inb(host->addr + TUL_SStatus0)) & TSS_INT_PENDING)) |
| cpu_relax(); |
| |
| host->jsint = inb(host->addr + TUL_SInt); |
| |
| if (host->jsint & TSS_SCSIRST_INT) /* if SCSI bus reset detected */ |
| return int_initio_scsi_rst(host); |
| if (host->jsint & TSS_DISC_INT) { /* BUS disconnection */ |
| outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */ |
| outb(TSC_INITDEFAULT, host->addr + TUL_SConfig); |
| outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */ |
| host->active = NULL; |
| return -1; |
| } |
| return initio_bad_seq(host); |
| } |
| |
| static int initio_wait_done_disc(struct initio_host * host) |
| { |
| while (!((host->jsstatus0 = inb(host->addr + TUL_SStatus0)) |
| & TSS_INT_PENDING)) |
| cpu_relax(); |
| |
| host->jsint = inb(host->addr + TUL_SInt); |
| |
| if (host->jsint & TSS_SCSIRST_INT) /* if SCSI bus reset detected */ |
| return int_initio_scsi_rst(host); |
| if (host->jsint & TSS_DISC_INT) { /* BUS disconnection */ |
| outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */ |
| outb(TSC_INITDEFAULT, host->addr + TUL_SConfig); |
| outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */ |
| initio_unlink_busy_scb(host, host->active); |
| |
| initio_append_done_scb(host, host->active); |
| host->active = NULL; |
| return -1; |
| } |
| return initio_bad_seq(host); |
| } |
| |
| /** |
| * i91u_intr - IRQ handler |
| * @irqno: IRQ number |
| * @dev_id: IRQ identifier |
| * |
| * Take the relevant locks and then invoke the actual isr processing |
| * code under the lock. |
| */ |
| |
| static irqreturn_t i91u_intr(int irqno, void *dev_id) |
| { |
| struct Scsi_Host *dev = dev_id; |
| unsigned long flags; |
| int r; |
| |
| spin_lock_irqsave(dev->host_lock, flags); |
| r = initio_isr((struct initio_host *)dev->hostdata); |
| spin_unlock_irqrestore(dev->host_lock, flags); |
| if (r) |
| return IRQ_HANDLED; |
| else |
| return IRQ_NONE; |
| } |
| |
| |
| /** |
| * initio_build_scb - Build the mappings and SCB |
| * @host: InitIO host taking the command |
| * @cblk: Firmware command block |
| * @cmnd: SCSI midlayer command block |
| * |
| * Translate the abstract SCSI command into a firmware command block |
| * suitable for feeding to the InitIO host controller. This also requires |
| * we build the scatter gather lists and ensure they are mapped properly. |
| */ |
| |
| static void initio_build_scb(struct initio_host * host, struct scsi_ctrl_blk * cblk, struct scsi_cmnd * cmnd) |
| { /* Create corresponding SCB */ |
| struct scatterlist *sglist; |
| struct sg_entry *sg; /* Pointer to SG list */ |
| int i, nseg; |
| long total_len; |
| dma_addr_t dma_addr; |
| |
| /* Fill in the command headers */ |
| cblk->post = i91uSCBPost; /* i91u's callback routine */ |
| cblk->srb = cmnd; |
| cblk->opcode = ExecSCSI; |
| cblk->flags = SCF_POST; /* After SCSI done, call post routine */ |
| cblk->target = cmnd->device->id; |
| cblk->lun = cmnd->device->lun; |
| cblk->ident = cmnd->device->lun | DISC_ALLOW; |
| |
| cblk->flags |= SCF_SENSE; /* Turn on auto request sense */ |
| |
| /* Map the sense buffer into bus memory */ |
| dma_addr = dma_map_single(&host->pci_dev->dev, cmnd->sense_buffer, |
| SENSE_SIZE, DMA_FROM_DEVICE); |
| cblk->senseptr = (u32)dma_addr; |
| cblk->senselen = SENSE_SIZE; |
| cmnd->SCp.ptr = (char *)(unsigned long)dma_addr; |
| cblk->cdblen = cmnd->cmd_len; |
| |
| /* Clear the returned status */ |
| cblk->hastat = 0; |
| cblk->tastat = 0; |
| /* Command the command */ |
| memcpy(cblk->cdb, cmnd->cmnd, cmnd->cmd_len); |
| |
| /* Set up tags */ |
| if (cmnd->device->tagged_supported) { /* Tag Support */ |
| cblk->tagmsg = SIMPLE_QUEUE_TAG; /* Do simple tag only */ |
| } else { |
| cblk->tagmsg = 0; /* No tag support */ |
| } |
| |
| /* todo handle map_sg error */ |
| nseg = scsi_dma_map(cmnd); |
| BUG_ON(nseg < 0); |
| if (nseg) { |
| dma_addr = dma_map_single(&host->pci_dev->dev, &cblk->sglist[0], |
| sizeof(struct sg_entry) * TOTAL_SG_ENTRY, |
| DMA_BIDIRECTIONAL); |
| cblk->bufptr = (u32)dma_addr; |
| cmnd->SCp.dma_handle = dma_addr; |
| |
| cblk->sglen = nseg; |
| |
| cblk->flags |= SCF_SG; /* Turn on SG list flag */ |
| total_len = 0; |
| sg = &cblk->sglist[0]; |
| scsi_for_each_sg(cmnd, sglist, cblk->sglen, i) { |
| sg->data = cpu_to_le32((u32)sg_dma_address(sglist)); |
| sg->len = cpu_to_le32((u32)sg_dma_len(sglist)); |
| total_len += sg_dma_len(sglist); |
| ++sg; |
| } |
| |
| cblk->buflen = (scsi_bufflen(cmnd) > total_len) ? |
| total_len : scsi_bufflen(cmnd); |
| } else { /* No data transfer required */ |
| cblk->buflen = 0; |
| cblk->sglen = 0; |
| } |
| } |
| |
| /** |
| * i91u_queuecommand_lck - Queue a new command if possible |
| * @cmd: SCSI command block from the mid layer |
| * @done: Completion handler |
| * |
| * Attempts to queue a new command with the host adapter. Will return |
| * zero if successful or indicate a host busy condition if not (which |
| * will cause the mid layer to call us again later with the command) |
| */ |
| |
| static int i91u_queuecommand_lck(struct scsi_cmnd *cmd) |
| { |
| struct initio_host *host = (struct initio_host *) cmd->device->host->hostdata; |
| struct scsi_ctrl_blk *cmnd; |
| |
| cmnd = initio_alloc_scb(host); |
| if (!cmnd) |
| return SCSI_MLQUEUE_HOST_BUSY; |
| |
| initio_build_scb(host, cmnd, cmd); |
| initio_exec_scb(host, cmnd); |
| return 0; |
| } |
| |
| static DEF_SCSI_QCMD(i91u_queuecommand) |
| |
| /** |
| * i91u_bus_reset - reset the SCSI bus |
| * @cmnd: Command block we want to trigger the reset for |
| * |
| * Initiate a SCSI bus reset sequence |
| */ |
| |
| static int i91u_bus_reset(struct scsi_cmnd * cmnd) |
| { |
| struct initio_host *host; |
| |
| host = (struct initio_host *) cmnd->device->host->hostdata; |
| |
| spin_lock_irq(cmnd->device->host->host_lock); |
| initio_reset_scsi(host, 0); |
| spin_unlock_irq(cmnd->device->host->host_lock); |
| |
| return SUCCESS; |
| } |
| |
| /** |
| * i91u_biosparam - return the "logical geometry |
| * @sdev: SCSI device |
| * @dev: Matching block device |
| * @capacity: Sector size of drive |
| * @info_array: Return space for BIOS geometry |
| * |
| * Map the device geometry in a manner compatible with the host |
| * controller BIOS behaviour. |
| * |
| * FIXME: limited to 2^32 sector devices. |
| */ |
| |
| static int i91u_biosparam(struct scsi_device *sdev, struct block_device *dev, |
| sector_t capacity, int *info_array) |
| { |
| struct initio_host *host; /* Point to Host adapter control block */ |
| struct target_control *tc; |
| |
| host = (struct initio_host *) sdev->host->hostdata; |
| tc = &host->targets[sdev->id]; |
| |
| if (tc->heads) { |
| info_array[0] = tc->heads; |
| info_array[1] = tc->sectors; |
| info_array[2] = (unsigned long)capacity / tc->heads / tc->sectors; |
| } else { |
| if (tc->drv_flags & TCF_DRV_255_63) { |
| info_array[0] = 255; |
| info_array[1] = 63; |
| info_array[2] = (unsigned long)capacity / 255 / 63; |
| } else { |
| info_array[0] = 64; |
| info_array[1] = 32; |
| info_array[2] = (unsigned long)capacity >> 11; |
| } |
| } |
| |
| #if defined(DEBUG_BIOSPARAM) |
| if (i91u_debug & debug_biosparam) { |
| printk("bios geometry: head=%d, sec=%d, cyl=%d\n", |
| info_array[0], info_array[1], info_array[2]); |
| printk("WARNING: check, if the bios geometry is correct.\n"); |
| } |
| #endif |
| |
| return 0; |
| } |
| |
| /** |
| * i91u_unmap_scb - Unmap a command |
| * @pci_dev: PCI device the command is for |
| * @cmnd: The command itself |
| * |
| * Unmap any PCI mapping/IOMMU resources allocated when the command |
| * was mapped originally as part of initio_build_scb |
| */ |
| |
| static void i91u_unmap_scb(struct pci_dev *pci_dev, struct scsi_cmnd *cmnd) |
| { |
| /* auto sense buffer */ |
| if (cmnd->SCp.ptr) { |
| dma_unmap_single(&pci_dev->dev, |
| (dma_addr_t)((unsigned long)cmnd->SCp.ptr), |
| SENSE_SIZE, DMA_FROM_DEVICE); |
| cmnd->SCp.ptr = NULL; |
| } |
| |
| /* request buffer */ |
| if (scsi_sg_count(cmnd)) { |
| dma_unmap_single(&pci_dev->dev, cmnd->SCp.dma_handle, |
| sizeof(struct sg_entry) * TOTAL_SG_ENTRY, |
| DMA_BIDIRECTIONAL); |
| |
| scsi_dma_unmap(cmnd); |
| } |
| } |
| |
| /* |
| * i91uSCBPost - SCSI callback |
| * |
| * This is callback routine be called when tulip finish one |
| * SCSI command. |
| */ |
| |
| static void i91uSCBPost(u8 * host_mem, u8 * cblk_mem) |
| { |
| struct scsi_cmnd *cmnd; /* Pointer to SCSI request block */ |
| struct initio_host *host; |
| struct scsi_ctrl_blk *cblk; |
| |
| host = (struct initio_host *) host_mem; |
| cblk = (struct scsi_ctrl_blk *) cblk_mem; |
| if ((cmnd = cblk->srb) == NULL) { |
| printk(KERN_ERR "i91uSCBPost: SRB pointer is empty\n"); |
| WARN_ON(1); |
| initio_release_scb(host, cblk); /* Release SCB for current channel */ |
| return; |
| } |
| |
| /* |
| * Remap the firmware error status into a mid layer one |
| */ |
| switch (cblk->hastat) { |
| case 0x0: |
| case 0xa: /* Linked command complete without error and linked normally */ |
| case 0xb: /* Linked command complete without error interrupt generated */ |
| cblk->hastat = 0; |
| break; |
| |
| case 0x11: /* Selection time out-The initiator selection or target |
| reselection was not complete within the SCSI Time out period */ |
| cblk->hastat = DID_TIME_OUT; |
| break; |
| |
| case 0x14: /* Target bus phase sequence failure-An invalid bus phase or bus |
| phase sequence was requested by the target. The host adapter |
| will generate a SCSI Reset Condition, notifying the host with |
| a SCRD interrupt */ |
| cblk->hastat = DID_RESET; |
| break; |
| |
| case 0x1a: /* SCB Aborted. 07/21/98 */ |
| cblk->hastat = DID_ABORT; |
| break; |
| |
| case 0x12: /* Data overrun/underrun-The target attempted to transfer more data |
| than was allocated by the Data Length field or the sum of the |
| Scatter / Gather Data Length fields. */ |
| case 0x13: /* Unexpected bus free-The target dropped the SCSI BSY at an unexpected time. */ |
| case 0x16: /* Invalid SCB Operation Code. */ |
| |
| default: |
| printk("ini9100u: %x %x\n", cblk->hastat, cblk->tastat); |
| cblk->hastat = DID_ERROR; /* Couldn't find any better */ |
| break; |
| } |
| |
| cmnd->result = cblk->tastat | (cblk->hastat << 16); |
| i91u_unmap_scb(host->pci_dev, cmnd); |
| scsi_done(cmnd); /* Notify system DONE */ |
| initio_release_scb(host, cblk); /* Release SCB for current channel */ |
| } |
| |
| static struct scsi_host_template initio_template = { |
| .proc_name = "INI9100U", |
| .name = "Initio INI-9X00U/UW SCSI device driver", |
| .queuecommand = i91u_queuecommand, |
| .eh_bus_reset_handler = i91u_bus_reset, |
| .bios_param = i91u_biosparam, |
| .can_queue = MAX_TARGETS * i91u_MAXQUEUE, |
| .this_id = 1, |
| .sg_tablesize = SG_ALL, |
| }; |
| |
| static int initio_probe_one(struct pci_dev *pdev, |
| const struct pci_device_id *id) |
| { |
| struct Scsi_Host *shost; |
| struct initio_host *host; |
| u32 reg; |
| u16 bios_seg; |
| struct scsi_ctrl_blk *scb, *tmp, *prev = NULL /* silence gcc */; |
| int num_scb, i, error; |
| |
| error = pci_enable_device(pdev); |
| if (error) |
| return error; |
| |
| pci_read_config_dword(pdev, 0x44, (u32 *) & reg); |
| bios_seg = (u16) (reg & 0xFF); |
| if (((reg & 0xFF00) >> 8) == 0xFF) |
| reg = 0; |
| bios_seg = (bios_seg << 8) + ((u16) ((reg & 0xFF00) >> 8)); |
| |
| if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) { |
| printk(KERN_WARNING "i91u: Could not set 32 bit DMA mask\n"); |
| error = -ENODEV; |
| goto out_disable_device; |
| } |
| shost = scsi_host_alloc(&initio_template, sizeof(struct initio_host)); |
| if (!shost) { |
| printk(KERN_WARNING "initio: Could not allocate host structure.\n"); |
| error = -ENOMEM; |
| goto out_disable_device; |
| } |
| host = (struct initio_host *)shost->hostdata; |
| memset(host, 0, sizeof(struct initio_host)); |
| host->addr = pci_resource_start(pdev, 0); |
| host->bios_addr = bios_seg; |
| |
| if (!request_region(host->addr, 256, "i91u")) { |
| printk(KERN_WARNING "initio: I/O port range 0x%x is busy.\n", host->addr); |
| error = -ENODEV; |
| goto out_host_put; |
| } |
| |
| if (initio_tag_enable) /* 1.01i */ |
| num_scb = MAX_TARGETS * i91u_MAXQUEUE; |
| else |
| num_scb = MAX_TARGETS + 3; /* 1-tape, 1-CD_ROM, 1- extra */ |
| |
| for (; num_scb >= MAX_TARGETS + 3; num_scb--) { |
| i = num_scb * sizeof(struct scsi_ctrl_blk); |
| if ((scb = kzalloc(i, GFP_DMA)) != NULL) |
| break; |
| } |
| |
| if (!scb) { |
| printk(KERN_WARNING "initio: Cannot allocate SCB array.\n"); |
| error = -ENOMEM; |
| goto out_release_region; |
| } |
| |
| host->pci_dev = pdev; |
| |
| host->semaph = 1; |
| spin_lock_init(&host->semaph_lock); |
| host->num_scbs = num_scb; |
| host->scb = scb; |
| host->next_pending = scb; |
| host->next_avail = scb; |
| for (i = 0, tmp = scb; i < num_scb; i++, tmp++) { |
| tmp->tagid = i; |
| if (i != 0) |
| prev->next = tmp; |
| prev = tmp; |
| } |
| prev->next = NULL; |
| host->scb_end = tmp; |
| host->first_avail = scb; |
| host->last_avail = prev; |
| spin_lock_init(&host->avail_lock); |
| |
| initio_init(host, phys_to_virt(((u32)bios_seg << 4))); |
| |
| host->jsstatus0 = 0; |
| |
| shost->io_port = host->addr; |
| shost->n_io_port = 0xff; |
| shost->can_queue = num_scb; /* 03/05/98 */ |
| shost->unique_id = host->addr; |
| shost->max_id = host->max_tar; |
| shost->max_lun = 32; /* 10/21/97 */ |
| shost->irq = pdev->irq; |
| shost->this_id = host->scsi_id; /* Assign HCS index */ |
| shost->base = host->addr; |
| shost->sg_tablesize = TOTAL_SG_ENTRY; |
| |
| error = request_irq(pdev->irq, i91u_intr, IRQF_SHARED, "i91u", shost); |
| if (error < 0) { |
| printk(KERN_WARNING "initio: Unable to request IRQ %d\n", pdev->irq); |
| goto out_free_scbs; |
| } |
| |
| pci_set_drvdata(pdev, shost); |
| |
| error = scsi_add_host(shost, &pdev->dev); |
| if (error) |
| goto out_free_irq; |
| scsi_scan_host(shost); |
| return 0; |
| out_free_irq: |
| free_irq(pdev->irq, shost); |
| out_free_scbs: |
| kfree(host->scb); |
| out_release_region: |
| release_region(host->addr, 256); |
| out_host_put: |
| scsi_host_put(shost); |
| out_disable_device: |
| pci_disable_device(pdev); |
| return error; |
| } |
| |
| /** |
| * initio_remove_one - control shutdown |
| * @pdev: PCI device being released |
| * |
| * Release the resources assigned to this adapter after it has |
| * finished being used. |
| */ |
| |
| static void initio_remove_one(struct pci_dev *pdev) |
| { |
| struct Scsi_Host *host = pci_get_drvdata(pdev); |
| struct initio_host *s = (struct initio_host *)host->hostdata; |
| scsi_remove_host(host); |
| free_irq(pdev->irq, host); |
| release_region(s->addr, 256); |
| scsi_host_put(host); |
| pci_disable_device(pdev); |
| } |
| |
| MODULE_LICENSE("GPL"); |
| |
| static struct pci_device_id initio_pci_tbl[] = { |
| {PCI_VENDOR_ID_INIT, 0x9500, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, |
| {PCI_VENDOR_ID_INIT, 0x9400, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, |
| {PCI_VENDOR_ID_INIT, 0x9401, PCI_ANY
|