watchdog: Enable COMPILE_TEST for more drivers

There's quite a few watchdog drivers which are easily enabled for
COMPILE_TEST, so let's enable them.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230728195022.1198555-1-robh@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 5a1d038..f5057b3 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -307,7 +307,7 @@
 config XILINX_WINDOW_WATCHDOG
 	tristate "Xilinx window watchdog timer"
 	depends on HAS_IOMEM
-	depends on ARM64
+	depends on ARM64 || COMPILE_TEST
 	select WATCHDOG_CORE
 	help
 	  Window watchdog driver for the versal_wwdt IP core.
@@ -343,7 +343,7 @@
 
 config MLX_WDT
 	tristate "Mellanox Watchdog"
-	depends on MELLANOX_PLATFORM
+	depends on MELLANOX_PLATFORM || COMPILE_TEST
 	select WATCHDOG_CORE
 	select REGMAP
 	help
@@ -493,7 +493,7 @@
 
 config IXP4XX_WATCHDOG
 	tristate "IXP4xx Watchdog"
-	depends on ARCH_IXP4XX
+	depends on ARCH_IXP4XX || (ARM && COMPILE_TEST)
 	select WATCHDOG_CORE
 	help
 	  Say Y here if to include support for the watchdog timer
@@ -529,7 +529,7 @@
 
 config SA1100_WATCHDOG
 	tristate "SA1100/PXA2xx watchdog"
-	depends on ARCH_SA1100 || ARCH_PXA
+	depends on ARCH_SA1100 || ARCH_PXA || COMPILE_TEST
 	help
 	  Watchdog timer embedded into SA11x0 and PXA2xx chips. This will
 	  reboot your system when timeout is reached.
@@ -720,7 +720,7 @@
 config IMX_SC_WDT
 	tristate "IMX SC Watchdog"
 	depends on HAVE_ARM_SMCCC
-	depends on IMX_SCU
+	depends on IMX_SCU || COMPILE_TEST
 	select WATCHDOG_CORE
 	help
 	  This is the driver for the system controller watchdog
@@ -931,7 +931,7 @@
 
 config STM32_WATCHDOG
 	tristate "STM32 Independent WatchDoG (IWDG) support"
-	depends on ARCH_STM32
+	depends on ARCH_STM32 || COMPILE_TEST
 	select WATCHDOG_CORE
 	default y
 	help
@@ -1065,7 +1065,7 @@
 
 config ADVANTECH_WDT
 	tristate "Advantech SBC Watchdog Timer"
-	depends on X86
+	depends on X86 || COMPILE_TEST
 	help
 	  If you are configuring a Linux kernel for the Advantech single-board
 	  computer, say `Y' here to support its built-in watchdog timer
@@ -1074,7 +1074,7 @@
 
 config ADVANTECH_EC_WDT
 	tristate "Advantech Embedded Controller Watchdog Timer"
-	depends on X86
+	depends on X86 || COMPILE_TEST
 	select ISA_BUS_API
 	select WATCHDOG_CORE
 	help
@@ -1083,7 +1083,7 @@
 
 config ALIM1535_WDT
 	tristate "ALi M1535 PMU Watchdog Timer"
-	depends on X86 && PCI
+	depends on (X86 || COMPILE_TEST) && PCI
 	help
 	  This is the driver for the hardware watchdog on the ALi M1535 PMU.
 
@@ -1107,7 +1107,7 @@
 
 config EBC_C384_WDT
 	tristate "WinSystems EBC-C384 Watchdog Timer"
-	depends on X86
+	depends on X86 || COMPILE_TEST
 	select ISA_BUS_API
 	select WATCHDOG_CORE
 	help
@@ -1117,7 +1117,7 @@
 
 config EXAR_WDT
 	tristate "Exar Watchdog Timer"
-	depends on X86
+	depends on X86 || COMPILE_TEST
 	select WATCHDOG_CORE
 	help
 	  Enables watchdog timer support for the watchdog timer present
@@ -1128,7 +1128,7 @@
 
 config F71808E_WDT
 	tristate "Fintek F718xx, F818xx Super I/O Watchdog"
-	depends on X86
+	depends on X86 || COMPILE_TEST
 	select WATCHDOG_CORE
 	help
 	  This is the driver for the hardware watchdog on the Fintek F71808E,
@@ -1140,7 +1140,7 @@
 
 config SP5100_TCO
 	tristate "AMD/ATI SP5100 TCO Timer/Watchdog"
-	depends on X86 && PCI
+	depends on (X86 || COMPILE_TEST) && PCI
 	select WATCHDOG_CORE
 	help
 	  Hardware watchdog driver for the AMD/ATI SP5100 chipset. The TCO
@@ -1179,7 +1179,7 @@
 
 config SBC_FITPC2_WATCHDOG
 	tristate "Compulab SBC-FITPC2 watchdog"
-	depends on X86
+	depends on X86 || COMPILE_TEST
 	help
 	  This is the driver for the built-in watchdog timer on the fit-PC2,
 	  fit-PC2i, CM-iAM single-board computers made by Compulab.
@@ -1204,7 +1204,7 @@
 
 config EUROTECH_WDT
 	tristate "Eurotech CPU-1220/1410 Watchdog Timer"
-	depends on X86
+	depends on X86 || COMPILE_TEST
 	help
 	  Enable support for the watchdog timer on the Eurotech CPU-1220 and
 	  CPU-1410 cards.  These are PC/104 SBCs. Spec sheets and product
@@ -1212,7 +1212,7 @@
 
 config IB700_WDT
 	tristate "IB700 SBC Watchdog Timer"
-	depends on X86
+	depends on X86 || COMPILE_TEST
 	help
 	  This is the driver for the hardware watchdog on the IB700 Single
 	  Board Computer produced by TMC Technology (www.tmc-uk.com). This
@@ -1229,7 +1229,7 @@
 
 config IBMASR
 	tristate "IBM Automatic Server Restart"
-	depends on X86
+	depends on X86 || COMPILE_TEST
 	help
 	  This is the driver for the IBM Automatic Server Restart watchdog
 	  timer built-in into some eServer xSeries machines.
@@ -1239,7 +1239,7 @@
 
 config WAFER_WDT
 	tristate "ICP Single Board Computer Watchdog Timer"
-	depends on X86
+	depends on X86 || COMPILE_TEST
 	help
 	  This is a driver for the hardware watchdog on the ICP Single
 	  Board Computer. This driver is working on (at least) the following
@@ -1261,7 +1261,7 @@
 
 config IE6XX_WDT
 	tristate "Intel Atom E6xx Watchdog"
-	depends on X86 && PCI
+	depends on (X86 || COMPILE_TEST) && PCI
 	select WATCHDOG_CORE
 	select MFD_CORE
 	select LPC_SCH
@@ -1321,7 +1321,7 @@
 
 config IT8712F_WDT
 	tristate "IT8712F (Smart Guardian) Watchdog Timer"
-	depends on X86
+	depends on X86 || COMPILE_TEST
 	help
 	  This is the driver for the built-in watchdog timer on the IT8712F
 	  Super I/0 chipset used on many motherboards.
@@ -1334,7 +1334,7 @@
 
 config IT87_WDT
 	tristate "IT87 Watchdog Timer"
-	depends on X86
+	depends on X86 || COMPILE_TEST
 	select WATCHDOG_CORE
 	help
 	  This is the driver for the hardware watchdog on the ITE IT8607,
@@ -1352,7 +1352,7 @@
 config HP_WATCHDOG
 	tristate "HP ProLiant iLO2+ Hardware Watchdog Timer"
 	select WATCHDOG_CORE
-	depends on (ARM64 || X86) && PCI
+	depends on (ARM64 || X86 || COMPILE_TEST) && PCI
 	help
 	  A software monitoring watchdog and NMI handling driver. This driver
 	  will detect lockups and provide a stack trace. This is a driver that
@@ -1382,7 +1382,7 @@
 
 config SC1200_WDT
 	tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog"
-	depends on X86
+	depends on X86 || COMPILE_TEST
 	help
 	  This is a driver for National Semiconductor PC87307/PC97307 hardware
 	  watchdog cards as found on the SC1200. This watchdog is mainly used
@@ -1405,7 +1405,7 @@
 
 config PC87413_WDT
 	tristate "NS PC87413 watchdog"
-	depends on X86
+	depends on X86 || COMPILE_TEST
 	help
 	  This is the driver for the hardware watchdog on the PC87413 chipset
 	  This watchdog simply watches your kernel to make sure it doesn't
@@ -1419,7 +1419,7 @@
 
 config NV_TCO
 	tristate "nVidia TCO Timer/Watchdog"
-	depends on X86 && PCI
+	depends on (X86 || COMPILE_TEST) && PCI
 	help
 	  Hardware driver for the TCO timer built into the nVidia Hub family
 	  (such as the MCP51).  The TCO (Total Cost of Ownership) timer is a
@@ -1448,7 +1448,7 @@
 
 config 60XX_WDT
 	tristate "SBC-60XX Watchdog Timer"
-	depends on X86
+	depends on X86 || COMPILE_TEST
 	help
 	  This driver can be used with the watchdog timer found on some
 	  single board computers, namely the 6010 PII based computer.
@@ -1488,7 +1488,7 @@
 
 config CPU5_WDT
 	tristate "SMA CPU5 Watchdog"
-	depends on X86
+	depends on X86 || COMPILE_TEST
 	help
 	  TBD.
 	  To compile this driver as a module, choose M here: the
@@ -1496,7 +1496,7 @@
 
 config SMSC_SCH311X_WDT
 	tristate "SMSC SCH311X Watchdog Timer"
-	depends on X86
+	depends on X86 || COMPILE_TEST
 	help
 	  This is the driver for the hardware watchdog timer on the
 	  SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset
@@ -1508,7 +1508,7 @@
 
 config SMSC37B787_WDT
 	tristate "Winbond SMsC37B787 Watchdog Timer"
-	depends on X86
+	depends on X86 || COMPILE_TEST
 	help
 	  This is the driver for the hardware watchdog component on the
 	  Winbond SMsC37B787 chipset as used on the NetRunner Mainboard
@@ -1528,7 +1528,7 @@
 
 config TQMX86_WDT
 	tristate "TQ-Systems TQMX86 Watchdog Timer"
-	depends on X86
+	depends on X86 || COMPILE_TEST
 	select WATCHDOG_CORE
 	help
 	  This is the driver for the hardware watchdog timer in the TQMX86 IO
@@ -1541,7 +1541,7 @@
 
 config VIA_WDT
 	tristate "VIA Watchdog Timer"
-	depends on X86 && PCI
+	depends on (X86 || COMPILE_TEST) && PCI
 	select WATCHDOG_CORE
 	help
 	  This is the driver for the hardware watchdog timer on VIA
@@ -1554,7 +1554,7 @@
 
 config W83627HF_WDT
 	tristate "Watchdog timer for W83627HF/W83627DHG and compatibles"
-	depends on X86
+	depends on X86 || COMPILE_TEST
 	select WATCHDOG_CORE
 	help
 	  This is the driver for the hardware watchdog on the following
@@ -1584,7 +1584,7 @@
 
 config W83877F_WDT
 	tristate "W83877F (EMACS) Watchdog Timer"
-	depends on X86
+	depends on X86 || COMPILE_TEST
 	help
 	  This is the driver for the hardware watchdog on the W83877F chipset
 	  as used in EMACS PC-104 motherboards (and likely others).  This
@@ -1599,7 +1599,7 @@
 
 config W83977F_WDT
 	tristate "W83977F (PCM-5335) Watchdog Timer"
-	depends on X86
+	depends on X86 || COMPILE_TEST
 	help
 	  This is the driver for the hardware watchdog on the W83977F I/O chip
 	  as used in AAEON's PCM-5335 SBC (and likely others).  This
@@ -1612,7 +1612,7 @@
 
 config MACHZ_WDT
 	tristate "ZF MachZ Watchdog"
-	depends on X86
+	depends on X86 || COMPILE_TEST
 	help
 	  If you are using a ZF Micro MachZ processor, say Y here, otherwise
 	  N.  This is the driver for the watchdog timer built-in on that
@@ -1625,7 +1625,7 @@
 
 config SBC_EPX_C3_WATCHDOG
 	tristate "Winsystems SBC EPX-C3 watchdog"
-	depends on X86
+	depends on X86 || COMPILE_TEST
 	help
 	  This is the driver for the built-in watchdog timer on the EPX-C3
 	  Single-board computer made by Winsystems, Inc.
@@ -1740,7 +1740,7 @@
 
 config JZ4740_WDT
 	tristate "Ingenic jz4740 SoC hardware watchdog"
-	depends on MIPS
+	depends on MIPS || COMPILE_TEST
 	depends on COMMON_CLK
 	select WATCHDOG_CORE
 	select MFD_SYSCON
@@ -1837,7 +1837,7 @@
 
 config BCM_KONA_WDT_DEBUG
 	bool "DEBUGFS support for BCM Kona Watchdog"
-	depends on BCM_KONA_WDT
+	depends on BCM_KONA_WDT || COMPILE_TEST
 	help
 	  If enabled, adds /sys/kernel/debug/bcm_kona_wdt/info which provides
 	  access to the driver's internal data structures as well as watchdog
@@ -1878,7 +1878,7 @@
 
 config LOONGSON1_WDT
 	tristate "Loongson1 SoC hardware watchdog"
-	depends on MACH_LOONGSON32
+	depends on MACH_LOONGSON32 || COMPILE_TEST
 	select WATCHDOG_CORE
 	help
 	  Hardware driver for the Loongson1 SoC Watchdog Timer.
@@ -1892,7 +1892,7 @@
 
 config GXP_WATCHDOG
 	tristate "HPE GXP watchdog support"
-	depends on ARCH_HPE_GXP
+	depends on ARCH_HPE_GXP || COMPILE_TEST
 	select WATCHDOG_CORE
 	help
 	  Say Y here to include support for the watchdog timer