diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index 74da994..30022c4 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -9,7 +9,8 @@
 		drm_drv.o drm_fops.o drm_gem.o drm_ioctl.o drm_irq.o \
 		drm_lock.o drm_memory.o drm_proc.o drm_stub.o drm_vm.o \
 		drm_agpsupport.o drm_scatter.o ati_pcigart.o drm_pci.o \
-		drm_sysfs.o drm_hashtab.o drm_sman.o drm_mm.o
+		drm_sysfs.o drm_hashtab.o drm_sman.o drm_mm.o \
+		drm_crtc.o drm_crtc_helper.o drm_modes.o drm_edid.o
 
 drm-$(CONFIG_COMPAT) += drm_ioc32.o
 
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
new file mode 100644
index 0000000..2e88024
--- /dev/null
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -0,0 +1,2497 @@
+/*
+ * Copyright (c) 2006-2008 Intel Corporation
+ * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
+ * Copyright (c) 2008 Red Hat Inc.
+ *
+ * DRM core CRTC related functions
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission.  The copyright holders make no representations
+ * about the suitability of this software for any purpose.  It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ *
+ * Authors:
+ *      Keith Packard
+ *	Eric Anholt <eric@anholt.net>
+ *      Dave Airlie <airlied@linux.ie>
+ *      Jesse Barnes <jesse.barnes@intel.com>
+ */
+#include <linux/list.h>
+#include "drm.h"
+#include "drmP.h"
+#include "drm_crtc.h"
+
+struct drm_prop_enum_list {
+	int type;
+	char *name;
+};
+
+/* Avoid boilerplate.  I'm tired of typing. */
+#define DRM_ENUM_NAME_FN(fnname, list)				\
+	char *fnname(int val)					\
+	{							\
+		int i;						\
+		for (i = 0; i < ARRAY_SIZE(list); i++) {	\
+			if (list[i].type == val)		\
+				return list[i].name;		\
+		}						\
+		return "(unknown)";				\
+	}
+
+/*
+ * Global properties
+ */
+static struct drm_prop_enum_list drm_dpms_enum_list[] =
+{	{ DRM_MODE_DPMS_ON, "On" },
+	{ DRM_MODE_DPMS_STANDBY, "Standby" },
+	{ DRM_MODE_DPMS_SUSPEND, "Suspend" },
+	{ DRM_MODE_DPMS_OFF, "Off" }
+};
+
+DRM_ENUM_NAME_FN(drm_get_dpms_name, drm_dpms_enum_list)
+
+/*
+ * Optional properties
+ */
+static struct drm_prop_enum_list drm_scaling_mode_enum_list[] =
+{
+	{ DRM_MODE_SCALE_NON_GPU, "Non-GPU" },
+	{ DRM_MODE_SCALE_FULLSCREEN, "Fullscreen" },
+	{ DRM_MODE_SCALE_NO_SCALE, "No scale" },
+	{ DRM_MODE_SCALE_ASPECT, "Aspect" },
+};
+
+static struct drm_prop_enum_list drm_dithering_mode_enum_list[] =
+{
+	{ DRM_MODE_DITHERING_OFF, "Off" },
+	{ DRM_MODE_DITHERING_ON, "On" },
+};
+
+/*
+ * Non-global properties, but "required" for certain connectors.
+ */
+static struct drm_prop_enum_list drm_dvi_i_select_enum_list[] =
+{
+	{ DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
+	{ DRM_MODE_SUBCONNECTOR_DVID,      "DVI-D"     }, /* DVI-I  */
+	{ DRM_MODE_SUBCONNECTOR_DVIA,      "DVI-A"     }, /* DVI-I  */
+};
+
+DRM_ENUM_NAME_FN(drm_get_dvi_i_select_name, drm_dvi_i_select_enum_list)
+
+static struct drm_prop_enum_list drm_dvi_i_subconnector_enum_list[] =
+{
+	{ DRM_MODE_SUBCONNECTOR_Unknown,   "Unknown"   }, /* DVI-I and TV-out */
+	{ DRM_MODE_SUBCONNECTOR_DVID,      "DVI-D"     }, /* DVI-I  */
+	{ DRM_MODE_SUBCONNECTOR_DVIA,      "DVI-A"     }, /* DVI-I  */
+};
+
+DRM_ENUM_NAME_FN(drm_get_dvi_i_subconnector_name,
+		 drm_dvi_i_subconnector_enum_list)
+
+static struct drm_prop_enum_list drm_tv_select_enum_list[] =
+{
+	{ DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
+	{ DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
+	{ DRM_MODE_SUBCONNECTOR_SVIDEO,    "SVIDEO"    }, /* TV-out */
+	{ DRM_MODE_SUBCONNECTOR_Component, "Component" }, /* TV-out */
+};
+
+DRM_ENUM_NAME_FN(drm_get_tv_select_name, drm_tv_select_enum_list)
+
+static struct drm_prop_enum_list drm_tv_subconnector_enum_list[] =
+{
+	{ DRM_MODE_SUBCONNECTOR_Unknown,   "Unknown"   }, /* DVI-I and TV-out */
+	{ DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
+	{ DRM_MODE_SUBCONNECTOR_SVIDEO,    "SVIDEO"    }, /* TV-out */
+	{ DRM_MODE_SUBCONNECTOR_Component, "Component" }, /* TV-out */
+};
+
+DRM_ENUM_NAME_FN(drm_get_tv_subconnector_name,
+		 drm_tv_subconnector_enum_list)
+
+struct drm_conn_prop_enum_list {
+	int type;
+	char *name;
+	int count;
+};
+
+/*
+ * Connector and encoder types.
+ */
+static struct drm_conn_prop_enum_list drm_connector_enum_list[] =
+{	{ DRM_MODE_CONNECTOR_Unknown, "Unknown", 0 },
+	{ DRM_MODE_CONNECTOR_VGA, "VGA", 0 },
+	{ DRM_MODE_CONNECTOR_DVII, "DVI-I", 0 },
+	{ DRM_MODE_CONNECTOR_DVID, "DVI-D", 0 },
+	{ DRM_MODE_CONNECTOR_DVIA, "DVI-A", 0 },
+	{ DRM_MODE_CONNECTOR_Composite, "Composite", 0 },
+	{ DRM_MODE_CONNECTOR_SVIDEO, "SVIDEO", 0 },
+	{ DRM_MODE_CONNECTOR_LVDS, "LVDS", 0 },
+	{ DRM_MODE_CONNECTOR_Component, "Component", 0 },
+	{ DRM_MODE_CONNECTOR_9PinDIN, "9-pin DIN", 0 },
+	{ DRM_MODE_CONNECTOR_DisplayPort, "DisplayPort", 0 },
+	{ DRM_MODE_CONNECTOR_HDMIA, "HDMI Type A", 0 },
+	{ DRM_MODE_CONNECTOR_HDMIB, "HDMI Type B", 0 },
+};
+
+static struct drm_prop_enum_list drm_encoder_enum_list[] =
+{	{ DRM_MODE_ENCODER_NONE, "None" },
+	{ DRM_MODE_ENCODER_DAC, "DAC" },
+	{ DRM_MODE_ENCODER_TMDS, "TMDS" },
+	{ DRM_MODE_ENCODER_LVDS, "LVDS" },
+	{ DRM_MODE_ENCODER_TVDAC, "TV" },
+};
+
+char *drm_get_encoder_name(struct drm_encoder *encoder)
+{
+	static char buf[32];
+
+	snprintf(buf, 32, "%s-%d",
+		 drm_encoder_enum_list[encoder->encoder_type].name,
+		 encoder->base.id);
+	return buf;
+}
+
+char *drm_get_connector_name(struct drm_connector *connector)
+{
+	static char buf[32];
+
+	snprintf(buf, 32, "%s-%d",
+		 drm_connector_enum_list[connector->connector_type].name,
+		 connector->connector_type_id);
+	return buf;
+}
+EXPORT_SYMBOL(drm_get_connector_name);
+
+char *drm_get_connector_status_name(enum drm_connector_status status)
+{
+	if (status == connector_status_connected)
+		return "connected";
+	else if (status == connector_status_disconnected)
+		return "disconnected";
+	else
+		return "unknown";
+}
+
+/**
+ * drm_mode_object_get - allocate a new identifier
+ * @dev: DRM device
+ * @ptr: object pointer, used to generate unique ID
+ * @type: object type
+ *
+ * LOCKING:
+ * Caller must hold DRM mode_config lock.
+ *
+ * Create a unique identifier based on @ptr in @dev's identifier space.  Used
+ * for tracking modes, CRTCs and connectors.
+ *
+ * RETURNS:
+ * New unique (relative to other objects in @dev) integer identifier for the
+ * object.
+ */
+static int drm_mode_object_get(struct drm_device *dev,
+			       struct drm_mode_object *obj, uint32_t obj_type)
+{
+	int new_id = 0;
+	int ret;
+
+	WARN(!mutex_is_locked(&dev->mode_config.mutex),
+	     "%s called w/o mode_config lock\n", __FUNCTION__);
+again:
+	if (idr_pre_get(&dev->mode_config.crtc_idr, GFP_KERNEL) == 0) {
+		DRM_ERROR("Ran out memory getting a mode number\n");
+		return -EINVAL;
+	}
+
+	ret = idr_get_new_above(&dev->mode_config.crtc_idr, obj, 1, &new_id);
+	if (ret == -EAGAIN)
+		goto again;
+
+	obj->id = new_id;
+	obj->type = obj_type;
+	return 0;
+}
+
+/**
+ * drm_mode_object_put - free an identifer
+ * @dev: DRM device
+ * @id: ID to free
+ *
+ * LOCKING:
+ * Caller must hold DRM mode_config lock.
+ *
+ * Free @id from @dev's unique identifier pool.
+ */
+static void drm_mode_object_put(struct drm_device *dev,
+				struct drm_mode_object *object)
+{
+	idr_remove(&dev->mode_config.crtc_idr, object->id);
+}
+
+void *drm_mode_object_find(struct drm_device *dev, uint32_t id, uint32_t type)
+{
+	struct drm_mode_object *obj;
+
+	obj = idr_find(&dev->mode_config.crtc_idr, id);
+	if (!obj || (obj->type != type) || (obj->id != id))
+		return NULL;
+
+	return obj;
+}
+EXPORT_SYMBOL(drm_mode_object_find);
+
+/**
+ * drm_crtc_from_fb - find the CRTC structure associated with an fb
+ * @dev: DRM device
+ * @fb: framebuffer in question
+ *
+ * LOCKING:
+ * Caller must hold mode_config lock.
+ *
+ * Find CRTC in the mode_config structure that matches @fb.
+ *
+ * RETURNS:
+ * Pointer to the CRTC or NULL if it wasn't found.
+ */
+struct drm_crtc *drm_crtc_from_fb(struct drm_device *dev,
+				  struct drm_framebuffer *fb)
+{
+	struct drm_crtc *crtc;
+
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		if (crtc->fb == fb)
+			return crtc;
+	}
+	return NULL;
+}
+
+/**
+ * drm_framebuffer_init - initialize a framebuffer
+ * @dev: DRM device
+ *
+ * LOCKING:
+ * Caller must hold mode config lock.
+ *
+ * Allocates an ID for the framebuffer's parent mode object, sets its mode
+ * functions & device file and adds it to the master fd list.
+ *
+ * RETURNS:
+ * Zero on success, error code on falure.
+ */
+int drm_framebuffer_init(struct drm_device *dev, struct drm_framebuffer *fb,
+			 const struct drm_framebuffer_funcs *funcs)
+{
+	int ret;
+
+	ret = drm_mode_object_get(dev, &fb->base, DRM_MODE_OBJECT_FB);
+	if (ret) {
+		return ret;
+	}
+
+	fb->dev = dev;
+	fb->funcs = funcs;
+	dev->mode_config.num_fb++;
+	list_add(&fb->head, &dev->mode_config.fb_list);
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_framebuffer_init);
+
+/**
+ * drm_framebuffer_cleanup - remove a framebuffer object
+ * @fb: framebuffer to remove
+ *
+ * LOCKING:
+ * Caller must hold mode config lock.
+ *
+ * Scans all the CRTCs in @dev's mode_config.  If they're using @fb, removes
+ * it, setting it to NULL.
+ */
+void drm_framebuffer_cleanup(struct drm_framebuffer *fb)
+{
+	struct drm_device *dev = fb->dev;
+	struct drm_crtc *crtc;
+
+	/* remove from any CRTC */
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		if (crtc->fb == fb)
+			crtc->fb = NULL;
+	}
+
+	drm_mode_object_put(dev, &fb->base);
+	list_del(&fb->head);
+	dev->mode_config.num_fb--;
+}
+EXPORT_SYMBOL(drm_framebuffer_cleanup);
+
+/**
+ * drm_crtc_init - Initialise a new CRTC object
+ * @dev: DRM device
+ * @crtc: CRTC object to init
+ * @funcs: callbacks for the new CRTC
+ *
+ * LOCKING:
+ * Caller must hold mode config lock.
+ *
+ * Inits a new object created as base part of an driver crtc object.
+ */
+void drm_crtc_init(struct drm_device *dev, struct drm_crtc *crtc,
+		   const struct drm_crtc_funcs *funcs)
+{
+	crtc->dev = dev;
+	crtc->funcs = funcs;
+
+	mutex_lock(&dev->mode_config.mutex);
+	drm_mode_object_get(dev, &crtc->base, DRM_MODE_OBJECT_CRTC);
+
+	list_add_tail(&crtc->head, &dev->mode_config.crtc_list);
+	dev->mode_config.num_crtc++;
+	mutex_unlock(&dev->mode_config.mutex);
+}
+EXPORT_SYMBOL(drm_crtc_init);
+
+/**
+ * drm_crtc_cleanup - Cleans up the core crtc usage.
+ * @crtc: CRTC to cleanup
+ *
+ * LOCKING:
+ * Caller must hold mode config lock.
+ *
+ * Cleanup @crtc. Removes from drm modesetting space
+ * does NOT free object, caller does that.
+ */
+void drm_crtc_cleanup(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+
+	if (crtc->gamma_store) {
+		kfree(crtc->gamma_store);
+		crtc->gamma_store = NULL;
+	}
+
+	drm_mode_object_put(dev, &crtc->base);
+	list_del(&crtc->head);
+	dev->mode_config.num_crtc--;
+}
+EXPORT_SYMBOL(drm_crtc_cleanup);
+
+/**
+ * drm_mode_probed_add - add a mode to a connector's probed mode list
+ * @connector: connector the new mode
+ * @mode: mode data
+ *
+ * LOCKING:
+ * Caller must hold mode config lock.
+ *
+ * Add @mode to @connector's mode list for later use.
+ */
+void drm_mode_probed_add(struct drm_connector *connector,
+			 struct drm_display_mode *mode)
+{
+	list_add(&mode->head, &connector->probed_modes);
+}
+EXPORT_SYMBOL(drm_mode_probed_add);
+
+/**
+ * drm_mode_remove - remove and free a mode
+ * @connector: connector list to modify
+ * @mode: mode to remove
+ *
+ * LOCKING:
+ * Caller must hold mode config lock.
+ *
+ * Remove @mode from @connector's mode list, then free it.
+ */
+void drm_mode_remove(struct drm_connector *connector,
+		     struct drm_display_mode *mode)
+{
+	list_del(&mode->head);
+	kfree(mode);
+}
+EXPORT_SYMBOL(drm_mode_remove);
+
+/**
+ * drm_connector_init - Init a preallocated connector
+ * @dev: DRM device
+ * @connector: the connector to init
+ * @funcs: callbacks for this connector
+ * @name: user visible name of the connector
+ *
+ * LOCKING:
+ * Caller must hold @dev's mode_config lock.
+ *
+ * Initialises a preallocated connector. Connectors should be
+ * subclassed as part of driver connector objects.
+ */
+void drm_connector_init(struct drm_device *dev,
+		     struct drm_connector *connector,
+		     const struct drm_connector_funcs *funcs,
+		     int connector_type)
+{
+	mutex_lock(&dev->mode_config.mutex);
+
+	connector->dev = dev;
+	connector->funcs = funcs;
+	drm_mode_object_get(dev, &connector->base, DRM_MODE_OBJECT_CONNECTOR);
+	connector->connector_type = connector_type;
+	connector->connector_type_id =
+		++drm_connector_enum_list[connector_type].count; /* TODO */
+	INIT_LIST_HEAD(&connector->user_modes);
+	INIT_LIST_HEAD(&connector->probed_modes);
+	INIT_LIST_HEAD(&connector->modes);
+	connector->edid_blob_ptr = NULL;
+
+	list_add_tail(&connector->head, &dev->mode_config.connector_list);
+	dev->mode_config.num_connector++;
+
+	drm_connector_attach_property(connector,
+				      dev->mode_config.edid_property, 0);
+
+	drm_connector_attach_property(connector,
+				      dev->mode_config.dpms_property, 0);
+
+	mutex_unlock(&dev->mode_config.mutex);
+}
+EXPORT_SYMBOL(drm_connector_init);
+
+/**
+ * drm_connector_cleanup - cleans up an initialised connector
+ * @connector: connector to cleanup
+ *
+ * LOCKING:
+ * Caller must hold @dev's mode_config lock.
+ *
+ * Cleans up the connector but doesn't free the object.
+ */
+void drm_connector_cleanup(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_display_mode *mode, *t;
+
+	list_for_each_entry_safe(mode, t, &connector->probed_modes, head)
+		drm_mode_remove(connector, mode);
+
+	list_for_each_entry_safe(mode, t, &connector->modes, head)
+		drm_mode_remove(connector, mode);
+
+	list_for_each_entry_safe(mode, t, &connector->user_modes, head)
+		drm_mode_remove(connector, mode);
+
+	mutex_lock(&dev->mode_config.mutex);
+	drm_mode_object_put(dev, &connector->base);
+	list_del(&connector->head);
+	mutex_unlock(&dev->mode_config.mutex);
+}
+EXPORT_SYMBOL(drm_connector_cleanup);
+
+void drm_encoder_init(struct drm_device *dev,
+		      struct drm_encoder *encoder,
+		      const struct drm_encoder_funcs *funcs,
+		      int encoder_type)
+{
+	mutex_lock(&dev->mode_config.mutex);
+
+	encoder->dev = dev;
+
+	drm_mode_object_get(dev, &encoder->base, DRM_MODE_OBJECT_ENCODER);
+	encoder->encoder_type = encoder_type;
+	encoder->funcs = funcs;
+
+	list_add_tail(&encoder->head, &dev->mode_config.encoder_list);
+	dev->mode_config.num_encoder++;
+
+	mutex_unlock(&dev->mode_config.mutex);
+}
+EXPORT_SYMBOL(drm_encoder_init);
+
+void drm_encoder_cleanup(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	mutex_lock(&dev->mode_config.mutex);
+	drm_mode_object_put(dev, &encoder->base);
+	list_del(&encoder->head);
+	mutex_unlock(&dev->mode_config.mutex);
+}
+EXPORT_SYMBOL(drm_encoder_cleanup);
+
+/**
+ * drm_mode_create - create a new display mode
+ * @dev: DRM device
+ *
+ * LOCKING:
+ * Caller must hold DRM mode_config lock.
+ *
+ * Create a new drm_display_mode, give it an ID, and return it.
+ *
+ * RETURNS:
+ * Pointer to new mode on success, NULL on error.
+ */
+struct drm_display_mode *drm_mode_create(struct drm_device *dev)
+{
+	struct drm_display_mode *nmode;
+
+	nmode = kzalloc(sizeof(struct drm_display_mode), GFP_KERNEL);
+	if (!nmode)
+		return NULL;
+
+	drm_mode_object_get(dev, &nmode->base, DRM_MODE_OBJECT_MODE);
+	return nmode;
+}
+EXPORT_SYMBOL(drm_mode_create);
+
+/**
+ * drm_mode_destroy - remove a mode
+ * @dev: DRM device
+ * @mode: mode to remove
+ *
+ * LOCKING:
+ * Caller must hold mode config lock.
+ *
+ * Free @mode's unique identifier, then free it.
+ */
+void drm_mode_destroy(struct drm_device *dev, struct drm_display_mode *mode)
+{
+	drm_mode_object_put(dev, &mode->base);
+
+	kfree(mode);
+}
+EXPORT_SYMBOL(drm_mode_destroy);
+
+static int drm_mode_create_standard_connector_properties(struct drm_device *dev)
+{
+	struct drm_property *edid;
+	struct drm_property *dpms;
+	int i;
+
+	/*
+	 * Standard properties (apply to all connectors)
+	 */
+	edid = drm_property_create(dev, DRM_MODE_PROP_BLOB |
+				   DRM_MODE_PROP_IMMUTABLE,
+				   "EDID", 0);
+	dev->mode_config.edid_property = edid;
+
+	dpms = drm_property_create(dev, DRM_MODE_PROP_ENUM,
+				   "DPMS", ARRAY_SIZE(drm_dpms_enum_list));
+	for (i = 0; i < ARRAY_SIZE(drm_dpms_enum_list); i++)
+		drm_property_add_enum(dpms, i, drm_dpms_enum_list[i].type,
+				      drm_dpms_enum_list[i].name);
+	dev->mode_config.dpms_property = dpms;
+
+	return 0;
+}
+
+/**
+ * drm_mode_create_dvi_i_properties - create DVI-I specific connector properties
+ * @dev: DRM device
+ *
+ * Called by a driver the first time a DVI-I connector is made.
+ */
+int drm_mode_create_dvi_i_properties(struct drm_device *dev)
+{
+	struct drm_property *dvi_i_selector;
+	struct drm_property *dvi_i_subconnector;
+	int i;
+
+	if (dev->mode_config.dvi_i_select_subconnector_property)
+		return 0;
+
+	dvi_i_selector =
+		drm_property_create(dev, DRM_MODE_PROP_ENUM,
+				    "select subconnector",
+				    ARRAY_SIZE(drm_dvi_i_select_enum_list));
+	for (i = 0; i < ARRAY_SIZE(drm_dvi_i_select_enum_list); i++)
+		drm_property_add_enum(dvi_i_selector, i,
+				      drm_dvi_i_select_enum_list[i].type,
+				      drm_dvi_i_select_enum_list[i].name);
+	dev->mode_config.dvi_i_select_subconnector_property = dvi_i_selector;
+
+	dvi_i_subconnector =
+		drm_property_create(dev, DRM_MODE_PROP_ENUM |
+				    DRM_MODE_PROP_IMMUTABLE,
+				    "subconnector",
+				    ARRAY_SIZE(drm_dvi_i_subconnector_enum_list));
+	for (i = 0; i < ARRAY_SIZE(drm_dvi_i_subconnector_enum_list); i++)
+		drm_property_add_enum(dvi_i_subconnector, i,
+				      drm_dvi_i_subconnector_enum_list[i].type,
+				      drm_dvi_i_subconnector_enum_list[i].name);
+	dev->mode_config.dvi_i_subconnector_property = dvi_i_subconnector;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_mode_create_dvi_i_properties);
+
+/**
+ * drm_create_tv_properties - create TV specific connector properties
+ * @dev: DRM device
+ * @num_modes: number of different TV formats (modes) supported
+ * @modes: array of pointers to strings containing name of each format
+ *
+ * Called by a driver's TV initialization routine, this function creates
+ * the TV specific connector properties for a given device.  Caller is
+ * responsible for allocating a list of format names and passing them to
+ * this routine.
+ */
+int drm_mode_create_tv_properties(struct drm_device *dev, int num_modes,
+				  char *modes[])
+{
+	struct drm_property *tv_selector;
+	struct drm_property *tv_subconnector;
+	int i;
+
+	if (dev->mode_config.tv_select_subconnector_property)
+		return 0;
+
+	/*
+	 * Basic connector properties
+	 */
+	tv_selector = drm_property_create(dev, DRM_MODE_PROP_ENUM,
+					  "select subconnector",
+					  ARRAY_SIZE(drm_tv_select_enum_list));
+	for (i = 0; i < ARRAY_SIZE(drm_tv_select_enum_list); i++)
+		drm_property_add_enum(tv_selector, i,
+				      drm_tv_select_enum_list[i].type,
+				      drm_tv_select_enum_list[i].name);
+	dev->mode_config.tv_select_subconnector_property = tv_selector;
+
+	tv_subconnector =
+		drm_property_create(dev, DRM_MODE_PROP_ENUM |
+				    DRM_MODE_PROP_IMMUTABLE, "subconnector",
+				    ARRAY_SIZE(drm_tv_subconnector_enum_list));
+	for (i = 0; i < ARRAY_SIZE(drm_tv_subconnector_enum_list); i++)
+		drm_property_add_enum(tv_subconnector, i,
+				      drm_tv_subconnector_enum_list[i].type,
+				      drm_tv_subconnector_enum_list[i].name);
+	dev->mode_config.tv_subconnector_property = tv_subconnector;
+
+	/*
+	 * Other, TV specific properties: margins & TV modes.
+	 */
+	dev->mode_config.tv_left_margin_property =
+		drm_property_create(dev, DRM_MODE_PROP_RANGE,
+				    "left margin", 2);
+	dev->mode_config.tv_left_margin_property->values[0] = 0;
+	dev->mode_config.tv_left_margin_property->values[1] = 100;
+
+	dev->mode_config.tv_right_margin_property =
+		drm_property_create(dev, DRM_MODE_PROP_RANGE,
+				    "right margin", 2);
+	dev->mode_config.tv_right_margin_property->values[0] = 0;
+	dev->mode_config.tv_right_margin_property->values[1] = 100;
+
+	dev->mode_config.tv_top_margin_property =
+		drm_property_create(dev, DRM_MODE_PROP_RANGE,
+				    "top margin", 2);
+	dev->mode_config.tv_top_margin_property->values[0] = 0;
+	dev->mode_config.tv_top_margin_property->values[1] = 100;
+
+	dev->mode_config.tv_bottom_margin_property =
+		drm_property_create(dev, DRM_MODE_PROP_RANGE,
+				    "bottom margin", 2);
+	dev->mode_config.tv_bottom_margin_property->values[0] = 0;
+	dev->mode_config.tv_bottom_margin_property->values[1] = 100;
+
+	dev->mode_config.tv_mode_property =
+		drm_property_create(dev, DRM_MODE_PROP_ENUM,
+				    "mode", num_modes);
+	for (i = 0; i < num_modes; i++)
+		drm_property_add_enum(dev->mode_config.tv_mode_property, i,
+				      i, modes[i]);
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_mode_create_tv_properties);
+
+/**
+ * drm_mode_create_scaling_mode_property - create scaling mode property
+ * @dev: DRM device
+ *
+ * Called by a driver the first time it's needed, must be attached to desired
+ * connectors.
+ */
+int drm_mode_create_scaling_mode_property(struct drm_device *dev)
+{
+	struct drm_property *scaling_mode;
+	int i;
+
+	if (dev->mode_config.scaling_mode_property)
+		return 0;
+
+	scaling_mode =
+		drm_property_create(dev, DRM_MODE_PROP_ENUM, "scaling mode",
+				    ARRAY_SIZE(drm_scaling_mode_enum_list));
+	for (i = 0; i < ARRAY_SIZE(drm_scaling_mode_enum_list); i++)
+		drm_property_add_enum(scaling_mode, i,
+				      drm_scaling_mode_enum_list[i].type,
+				      drm_scaling_mode_enum_list[i].name);
+
+	dev->mode_config.scaling_mode_property = scaling_mode;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_mode_create_scaling_mode_property);
+
+/**
+ * drm_mode_create_dithering_property - create dithering property
+ * @dev: DRM device
+ *
+ * Called by a driver the first time it's needed, must be attached to desired
+ * connectors.
+ */
+int drm_mode_create_dithering_property(struct drm_device *dev)
+{
+	struct drm_property *dithering_mode;
+	int i;
+
+	if (dev->mode_config.dithering_mode_property)
+		return 0;
+
+	dithering_mode =
+		drm_property_create(dev, DRM_MODE_PROP_ENUM, "dithering",
+				    ARRAY_SIZE(drm_dithering_mode_enum_list));
+	for (i = 0; i < ARRAY_SIZE(drm_dithering_mode_enum_list); i++)
+		drm_property_add_enum(dithering_mode, i,
+				      drm_dithering_mode_enum_list[i].type,
+				      drm_dithering_mode_enum_list[i].name);
+	dev->mode_config.dithering_mode_property = dithering_mode;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_mode_create_dithering_property);
+
+/**
+ * drm_mode_config_init - initialize DRM mode_configuration structure
+ * @dev: DRM device
+ *
+ * LOCKING:
+ * None, should happen single threaded at init time.
+ *
+ * Initialize @dev's mode_config structure, used for tracking the graphics
+ * configuration of @dev.
+ */
+void drm_mode_config_init(struct drm_device *dev)
+{
+	mutex_init(&dev->mode_config.mutex);
+	INIT_LIST_HEAD(&dev->mode_config.fb_list);
+	INIT_LIST_HEAD(&dev->mode_config.fb_kernel_list);
+	INIT_LIST_HEAD(&dev->mode_config.crtc_list);
+	INIT_LIST_HEAD(&dev->mode_config.connector_list);
+	INIT_LIST_HEAD(&dev->mode_config.encoder_list);
+	INIT_LIST_HEAD(&dev->mode_config.property_list);
+	INIT_LIST_HEAD(&dev->mode_config.property_blob_list);
+	idr_init(&dev->mode_config.crtc_idr);
+
+	mutex_lock(&dev->mode_config.mutex);
+	drm_mode_create_standard_connector_properties(dev);
+	mutex_unlock(&dev->mode_config.mutex);
+
+	/* Just to be sure */
+	dev->mode_config.num_fb = 0;
+	dev->mode_config.num_connector = 0;
+	dev->mode_config.num_crtc = 0;
+	dev->mode_config.num_encoder = 0;
+	dev->mode_config.hotplug_counter = 0;
+}
+EXPORT_SYMBOL(drm_mode_config_init);
+
+int drm_mode_group_init(struct drm_device *dev, struct drm_mode_group *group)
+{
+	uint32_t total_objects = 0;
+
+	total_objects += dev->mode_config.num_crtc;
+	total_objects += dev->mode_config.num_connector;
+	total_objects += dev->mode_config.num_encoder;
+
+	if (total_objects == 0)
+		return -EINVAL;
+
+	group->id_list = kzalloc(total_objects * sizeof(uint32_t), GFP_KERNEL);
+	if (!group->id_list)
+		return -ENOMEM;
+
+	group->num_crtcs = 0;
+	group->num_connectors = 0;
+	group->num_encoders = 0;
+	return 0;
+}
+
+int drm_mode_group_init_legacy_group(struct drm_device *dev,
+				     struct drm_mode_group *group)
+{
+	struct drm_crtc *crtc;
+	struct drm_encoder *encoder;
+	struct drm_connector *connector;
+	int ret;
+
+	if ((ret = drm_mode_group_init(dev, group)))
+		return ret;
+
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
+		group->id_list[group->num_crtcs++] = crtc->base.id;
+
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head)
+		group->id_list[group->num_crtcs + group->num_encoders++] =
+		encoder->base.id;
+
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head)
+		group->id_list[group->num_crtcs + group->num_encoders +
+			       group->num_connectors++] = connector->base.id;
+
+	return 0;
+}
+
+/**
+ * drm_mode_config_cleanup - free up DRM mode_config info
+ * @dev: DRM device
+ *
+ * LOCKING:
+ * Caller must hold mode config lock.
+ *
+ * Free up all the connectors and CRTCs associated with this DRM device, then
+ * free up the framebuffers and associated buffer objects.
+ *
+ * FIXME: cleanup any dangling user buffer objects too
+ */
+void drm_mode_config_cleanup(struct drm_device *dev)
+{
+	struct drm_connector *connector, *ot;
+	struct drm_crtc *crtc, *ct;
+	struct drm_encoder *encoder, *enct;
+	struct drm_framebuffer *fb, *fbt;
+	struct drm_property *property, *pt;
+
+	list_for_each_entry_safe(encoder, enct, &dev->mode_config.encoder_list,
+				 head) {
+		encoder->funcs->destroy(encoder);
+	}
+
+	list_for_each_entry_safe(connector, ot,
+				 &dev->mode_config.connector_list, head) {
+		connector->funcs->destroy(connector);
+	}
+
+	list_for_each_entry_safe(property, pt, &dev->mode_config.property_list,
+				 head) {
+		drm_property_destroy(dev, property);
+	}
+
+	list_for_each_entry_safe(fb, fbt, &dev->mode_config.fb_list, head) {
+		fb->funcs->destroy(fb);
+	}
+
+	list_for_each_entry_safe(crtc, ct, &dev->mode_config.crtc_list, head) {
+		crtc->funcs->destroy(crtc);
+	}
+
+}
+EXPORT_SYMBOL(drm_mode_config_cleanup);
+
+int drm_mode_hotplug_ioctl(struct drm_device *dev,
+			   void *data, struct drm_file *file_priv)
+{
+	struct drm_mode_hotplug *arg = data;
+
+	arg->counter = dev->mode_config.hotplug_counter;
+
+	return 0;
+}
+
+/**
+ * drm_crtc_convert_to_umode - convert a drm_display_mode into a modeinfo
+ * @out: drm_mode_modeinfo struct to return to the user
+ * @in: drm_display_mode to use
+ *
+ * LOCKING:
+ * None.
+ *
+ * Convert a drm_display_mode into a drm_mode_modeinfo structure to return to
+ * the user.
+ */
+void drm_crtc_convert_to_umode(struct drm_mode_modeinfo *out,
+			       struct drm_display_mode *in)
+{
+	out->clock = in->clock;
+	out->hdisplay = in->hdisplay;
+	out->hsync_start = in->hsync_start;
+	out->hsync_end = in->hsync_end;
+	out->htotal = in->htotal;
+	out->hskew = in->hskew;
+	out->vdisplay = in->vdisplay;
+	out->vsync_start = in->vsync_start;
+	out->vsync_end = in->vsync_end;
+	out->vtotal = in->vtotal;
+	out->vscan = in->vscan;
+	out->vrefresh = in->vrefresh;
+	out->flags = in->flags;
+	out->type = in->type;
+	strncpy(out->name, in->name, DRM_DISPLAY_MODE_LEN);
+	out->name[DRM_DISPLAY_MODE_LEN-1] = 0;
+}
+
+/**
+ * drm_crtc_convert_to_umode - convert a modeinfo into a drm_display_mode
+ * @out: drm_display_mode to return to the user
+ * @in: drm_mode_modeinfo to use
+ *
+ * LOCKING:
+ * None.
+ *
+ * Convert a drm_mode_modeinfo into a drm_display_mode structure to return to
+ * the caller.
+ */
+void drm_crtc_convert_umode(struct drm_display_mode *out,
+			    struct drm_mode_modeinfo *in)
+{
+	out->clock = in->clock;
+	out->hdisplay = in->hdisplay;
+	out->hsync_start = in->hsync_start;
+	out->hsync_end = in->hsync_end;
+	out->htotal = in->htotal;
+	out->hskew = in->hskew;
+	out->vdisplay = in->vdisplay;
+	out->vsync_start = in->vsync_start;
+	out->vsync_end = in->vsync_end;
+	out->vtotal = in->vtotal;
+	out->vscan = in->vscan;
+	out->vrefresh = in->vrefresh;
+	out->flags = in->flags;
+	out->type = in->type;
+	strncpy(out->name, in->name, DRM_DISPLAY_MODE_LEN);
+	out->name[DRM_DISPLAY_MODE_LEN-1] = 0;
+}
+
+/**
+ * drm_mode_getresources - get graphics configuration
+ * @inode: inode from the ioctl
+ * @filp: file * from the ioctl
+ * @cmd: cmd from ioctl
+ * @arg: arg from ioctl
+ *
+ * LOCKING:
+ * Takes mode config lock.
+ *
+ * Construct a set of configuration description structures and return
+ * them to the user, including CRTC, connector and framebuffer configuration.
+ *
+ * Called by the user via ioctl.
+ *
+ * RETURNS:
+ * Zero on success, errno on failure.
+ */
+int drm_mode_getresources(struct drm_device *dev, void *data,
+			  struct drm_file *file_priv)
+{
+	struct drm_mode_card_res *card_res = data;
+	struct list_head *lh;
+	struct drm_framebuffer *fb;
+	struct drm_connector *connector;
+	struct drm_crtc *crtc;
+	struct drm_encoder *encoder;
+	int ret = 0;
+	int connector_count = 0;
+	int crtc_count = 0;
+	int fb_count = 0;
+	int encoder_count = 0;
+	int copied = 0, i;
+	uint32_t __user *fb_id;
+	uint32_t __user *crtc_id;
+	uint32_t __user *connector_id;
+	uint32_t __user *encoder_id;
+	struct drm_mode_group *mode_group;
+
+	mutex_lock(&dev->mode_config.mutex);
+
+	/*
+	 * For the non-control nodes we need to limit the list of resources
+	 * by IDs in the group list for this node
+	 */
+	list_for_each(lh, &file_priv->fbs)
+		fb_count++;
+
+	mode_group = &file_priv->master->minor->mode_group;
+	if (file_priv->master->minor->type == DRM_MINOR_CONTROL) {
+
+		list_for_each(lh, &dev->mode_config.crtc_list)
+			crtc_count++;
+
+		list_for_each(lh, &dev->mode_config.connector_list)
+			connector_count++;
+
+		list_for_each(lh, &dev->mode_config.encoder_list)
+			encoder_count++;
+	} else {
+
+		crtc_count = mode_group->num_crtcs;
+		connector_count = mode_group->num_connectors;
+		encoder_count = mode_group->num_encoders;
+	}
+
+	card_res->max_height = dev->mode_config.max_height;
+	card_res->min_height = dev->mode_config.min_height;
+	card_res->max_width = dev->mode_config.max_width;
+	card_res->min_width = dev->mode_config.min_width;
+
+	/* handle this in 4 parts */
+	/* FBs */
+	if (card_res->count_fbs >= fb_count) {
+		copied = 0;
+		fb_id = (uint32_t __user *)(unsigned long)card_res->fb_id_ptr;
+		list_for_each_entry(fb, &file_priv->fbs, head) {
+			if (put_user(fb->base.id, fb_id + copied)) {
+				ret = -EFAULT;
+				goto out;
+			}
+			copied++;
+		}
+	}
+	card_res->count_fbs = fb_count;
+
+	/* CRTCs */
+	if (card_res->count_crtcs >= crtc_count) {
+		copied = 0;
+		crtc_id = (uint32_t __user *)(unsigned long)card_res->crtc_id_ptr;
+		if (file_priv->master->minor->type == DRM_MINOR_CONTROL) {
+			list_for_each_entry(crtc, &dev->mode_config.crtc_list,
+					    head) {
+				DRM_DEBUG("CRTC ID is %d\n", crtc->base.id);
+				if (put_user(crtc->base.id, crtc_id + copied)) {
+					ret = -EFAULT;
+					goto out;
+				}
+				copied++;
+			}
+		} else {
+			for (i = 0; i < mode_group->num_crtcs; i++) {
+				if (put_user(mode_group->id_list[i],
+					     crtc_id + copied)) {
+					ret = -EFAULT;
+					goto out;
+				}
+				copied++;
+			}
+		}
+	}
+	card_res->count_crtcs = crtc_count;
+
+	/* Encoders */
+	if (card_res->count_encoders >= encoder_count) {
+		copied = 0;
+		encoder_id = (uint32_t __user *)(unsigned long)card_res->encoder_id_ptr;
+		if (file_priv->master->minor->type == DRM_MINOR_CONTROL) {
+			list_for_each_entry(encoder,
+					    &dev->mode_config.encoder_list,
+					    head) {
+				DRM_DEBUG("ENCODER ID is %d\n",
+					  encoder->base.id);
+				if (put_user(encoder->base.id, encoder_id +
+					     copied)) {
+					ret = -EFAULT;
+					goto out;
+				}
+				copied++;
+			}
+		} else {
+			for (i = mode_group->num_crtcs; i < mode_group->num_crtcs + mode_group->num_encoders; i++) {
+				if (put_user(mode_group->id_list[i],
+					     encoder_id + copied)) {
+					ret = -EFAULT;
+					goto out;
+				}
+				copied++;
+			}
+
+		}
+	}
+	card_res->count_encoders = encoder_count;
+
+	/* Connectors */
+	if (card_res->count_connectors >= connector_count) {
+		copied = 0;
+		connector_id = (uint32_t __user *)(unsigned long)card_res->connector_id_ptr;
+		if (file_priv->master->minor->type == DRM_MINOR_CONTROL) {
+			list_for_each_entry(connector,
+					    &dev->mode_config.connector_list,
+					    head) {
+				DRM_DEBUG("CONNECTOR ID is %d\n",
+					  connector->base.id);
+				if (put_user(connector->base.id,
+					     connector_id + copied)) {
+					ret = -EFAULT;
+					goto out;
+				}
+				copied++;
+			}
+		} else {
+			int start = mode_group->num_crtcs +
+				mode_group->num_encoders;
+			for (i = start; i < start + mode_group->num_connectors; i++) {
+				if (put_user(mode_group->id_list[i],
+					     connector_id + copied)) {
+					ret = -EFAULT;
+					goto out;
+				}
+				copied++;
+			}
+		}
+	}
+	card_res->count_connectors = connector_count;
+
+	DRM_DEBUG("Counted %d %d %d\n", card_res->count_crtcs,
+		  card_res->count_connectors, card_res->count_encoders);
+
+out:
+	mutex_unlock(&dev->mode_config.mutex);
+	return ret;
+}
+
+/**
+ * drm_mode_getcrtc - get CRTC configuration
+ * @inode: inode from the ioctl
+ * @filp: file * from the ioctl
+ * @cmd: cmd from ioctl
+ * @arg: arg from ioctl
+ *
+ * LOCKING:
+ * Caller? (FIXME)
+ *
+ * Construct a CRTC configuration structure to return to the user.
+ *
+ * Called by the user via ioctl.
+ *
+ * RETURNS:
+ * Zero on success, errno on failure.
+ */
+int drm_mode_getcrtc(struct drm_device *dev,
+		     void *data, struct drm_file *file_priv)
+{
+	struct drm_mode_crtc *crtc_resp = data;
+	struct drm_crtc *crtc;
+	struct drm_mode_object *obj;
+	int ret = 0;
+
+	mutex_lock(&dev->mode_config.mutex);
+
+	obj = drm_mode_object_find(dev, crtc_resp->crtc_id,
+				   DRM_MODE_OBJECT_CRTC);
+	if (!obj) {
+		ret = -EINVAL;
+		goto out;
+	}
+	crtc = obj_to_crtc(obj);
+
+	crtc_resp->x = crtc->x;
+	crtc_resp->y = crtc->y;
+	crtc_resp->gamma_size = crtc->gamma_size;
+	if (crtc->fb)
+		crtc_resp->fb_id = crtc->fb->base.id;
+	else
+		crtc_resp->fb_id = 0;
+
+	if (crtc->enabled) {
+
+		drm_crtc_convert_to_umode(&crtc_resp->mode, &crtc->mode);
+		crtc_resp->mode_valid = 1;
+
+	} else {
+		crtc_resp->mode_valid = 0;
+	}
+
+out:
+	mutex_unlock(&dev->mode_config.mutex);
+	return ret;
+}
+
+/**
+ * drm_mode_getconnector - get connector configuration
+ * @inode: inode from the ioctl
+ * @filp: file * from the ioctl
+ * @cmd: cmd from ioctl
+ * @arg: arg from ioctl
+ *
+ * LOCKING:
+ * Caller? (FIXME)
+ *
+ * Construct a connector configuration structure to return to the user.
+ *
+ * Called by the user via ioctl.
+ *
+ * RETURNS:
+ * Zero on success, errno on failure.
+ */
+int drm_mode_getconnector(struct drm_device *dev, void *data,
+			  struct drm_file *file_priv)
+{
+	struct drm_mode_get_connector *out_resp = data;
+	struct drm_mode_object *obj;
+	struct drm_connector *connector;
+	struct drm_display_mode *mode;
+	int mode_count = 0;
+	int props_count = 0;
+	int encoders_count = 0;
+	int ret = 0;
+	int copied = 0;
+	int i;
+	struct drm_mode_modeinfo u_mode;
+	struct drm_mode_modeinfo __user *mode_ptr;
+	uint32_t __user *prop_ptr;
+	uint64_t __user *prop_values;
+	uint32_t __user *encoder_ptr;
+
+	memset(&u_mode, 0, sizeof(struct drm_mode_modeinfo));
+
+	DRM_DEBUG("connector id %d:\n", out_resp->connector_id);
+
+	mutex_lock(&dev->mode_config.mutex);
+
+	obj = drm_mode_object_find(dev, out_resp->connector_id,
+				   DRM_MODE_OBJECT_CONNECTOR);
+	if (!obj) {
+		ret = -EINVAL;
+		goto out;
+	}
+	connector = obj_to_connector(obj);
+
+	for (i = 0; i < DRM_CONNECTOR_MAX_PROPERTY; i++) {
+		if (connector->property_ids[i] != 0) {
+			props_count++;
+		}
+	}
+
+	for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
+		if (connector->encoder_ids[i] != 0) {
+			encoders_count++;
+		}
+	}
+
+	if (out_resp->count_modes == 0) {
+		connector->funcs->fill_modes(connector,
+					     dev->mode_config.max_width,
+					     dev->mode_config.max_height);
+	}
+
+	/* delayed so we get modes regardless of pre-fill_modes state */
+	list_for_each_entry(mode, &connector->modes, head)
+		mode_count++;
+
+	out_resp->connector_id = connector->base.id;
+	out_resp->connector_type = connector->connector_type;
+	out_resp->connector_type_id = connector->connector_type_id;
+	out_resp->mm_width = connector->display_info.width_mm;
+	out_resp->mm_height = connector->display_info.height_mm;
+	out_resp->subpixel = connector->display_info.subpixel_order;
+	out_resp->connection = connector->status;
+	if (connector->encoder)
+		out_resp->encoder_id = connector->encoder->base.id;
+	else
+		out_resp->encoder_id = 0;
+
+	/*
+	 * This ioctl is called twice, once to determine how much space is
+	 * needed, and the 2nd time to fill it.
+	 */
+	if ((out_resp->count_modes >= mode_count) && mode_count) {
+		copied = 0;
+		mode_ptr = (struct drm_mode_modeinfo *)(unsigned long)out_resp->modes_ptr;
+		list_for_each_entry(mode, &connector->modes, head) {
+			drm_crtc_convert_to_umode(&u_mode, mode);
+			if (copy_to_user(mode_ptr + copied,
+					 &u_mode, sizeof(u_mode))) {
+				ret = -EFAULT;
+				goto out;
+			}
+			copied++;
+		}
+	}
+	out_resp->count_modes = mode_count;
+
+	if ((out_resp->count_props >= props_count) && props_count) {
+		copied = 0;
+		prop_ptr = (uint32_t *)(unsigned long)(out_resp->props_ptr);
+		prop_values = (uint64_t *)(unsigned long)(out_resp->prop_values_ptr);
+		for (i = 0; i < DRM_CONNECTOR_MAX_PROPERTY; i++) {
+			if (connector->property_ids[i] != 0) {
+				if (put_user(connector->property_ids[i],
+					     prop_ptr + copied)) {
+					ret = -EFAULT;
+					goto out;
+				}
+
+				if (put_user(connector->property_values[i],
+					     prop_values + copied)) {
+					ret = -EFAULT;
+					goto out;
+				}
+				copied++;
+			}
+		}
+	}
+	out_resp->count_props = props_count;
+
+	if ((out_resp->count_encoders >= encoders_count) && encoders_count) {
+		copied = 0;
+		encoder_ptr = (uint32_t *)(unsigned long)(out_resp->encoders_ptr);
+		for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
+			if (connector->encoder_ids[i] != 0) {
+				if (put_user(connector->encoder_ids[i],
+					     encoder_ptr + copied)) {
+					ret = -EFAULT;
+					goto out;
+				}
+				copied++;
+			}
+		}
+	}
+	out_resp->count_encoders = encoders_count;
+
+out:
+	mutex_unlock(&dev->mode_config.mutex);
+	return ret;
+}
+
+int drm_mode_getencoder(struct drm_device *dev, void *data,
+			struct drm_file *file_priv)
+{
+	struct drm_mode_get_encoder *enc_resp = data;
+	struct drm_mode_object *obj;
+	struct drm_encoder *encoder;
+	int ret = 0;
+
+	mutex_lock(&dev->mode_config.mutex);
+	obj = drm_mode_object_find(dev, enc_resp->encoder_id,
+				   DRM_MODE_OBJECT_ENCODER);
+	if (!obj) {
+		ret = -EINVAL;
+		goto out;
+	}
+	encoder = obj_to_encoder(obj);
+
+	if (encoder->crtc)
+		enc_resp->crtc_id = encoder->crtc->base.id;
+	else
+		enc_resp->crtc_id = 0;
+	enc_resp->encoder_type = encoder->encoder_type;
+	enc_resp->encoder_id = encoder->base.id;
+	enc_resp->possible_crtcs = encoder->possible_crtcs;
+	enc_resp->possible_clones = encoder->possible_clones;
+
+out:
+	mutex_unlock(&dev->mode_config.mutex);
+	return ret;
+}
+
+/**
+ * drm_mode_setcrtc - set CRTC configuration
+ * @inode: inode from the ioctl
+ * @filp: file * from the ioctl
+ * @cmd: cmd from ioctl
+ * @arg: arg from ioctl
+ *
+ * LOCKING:
+ * Caller? (FIXME)
+ *
+ * Build a new CRTC configuration based on user request.
+ *
+ * Called by the user via ioctl.
+ *
+ * RETURNS:
+ * Zero on success, errno on failure.
+ */
+int drm_mode_setcrtc(struct drm_device *dev, void *data,
+		     struct drm_file *file_priv)
+{
+	struct drm_mode_config *config = &dev->mode_config;
+	struct drm_mode_crtc *crtc_req = data;
+	struct drm_mode_object *obj;
+	struct drm_crtc *crtc, *crtcfb;
+	struct drm_connector **connector_set = NULL, *connector;
+	struct drm_framebuffer *fb = NULL;
+	struct drm_display_mode *mode = NULL;
+	struct drm_mode_set set;
+	uint32_t __user *set_connectors_ptr;
+	int ret = 0;
+	int i;
+
+	mutex_lock(&dev->mode_config.mutex);
+	obj = drm_mode_object_find(dev, crtc_req->crtc_id,
+				   DRM_MODE_OBJECT_CRTC);
+	if (!obj) {
+		DRM_DEBUG("Unknown CRTC ID %d\n", crtc_req->crtc_id);
+		ret = -EINVAL;
+		goto out;
+	}
+	crtc = obj_to_crtc(obj);
+
+	if (crtc_req->mode_valid) {
+		/* If we have a mode we need a framebuffer. */
+		/* If we pass -1, set the mode with the currently bound fb */
+		if (crtc_req->fb_id == -1) {
+			list_for_each_entry(crtcfb,
+					    &dev->mode_config.crtc_list, head) {
+				if (crtcfb == crtc) {
+					DRM_DEBUG("Using current fb for setmode\n");
+					fb = crtc->fb;
+				}
+			}
+		} else {
+			obj = drm_mode_object_find(dev, crtc_req->fb_id,
+						   DRM_MODE_OBJECT_FB);
+			if (!obj) {
+				DRM_DEBUG("Unknown FB ID%d\n", crtc_req->fb_id);
+				ret = -EINVAL;
+				goto out;
+			}
+			fb = obj_to_fb(obj);
+		}
+
+		mode = drm_mode_create(dev);
+		drm_crtc_convert_umode(mode, &crtc_req->mode);
+		drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
+	}
+
+	if (crtc_req->count_connectors == 0 && mode) {
+		DRM_DEBUG("Count connectors is 0 but mode set\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (crtc_req->count_connectors > 0 && !mode && !fb) {
+		DRM_DEBUG("Count connectors is %d but no mode or fb set\n",
+			  crtc_req->count_connectors);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (crtc_req->count_connectors > 0) {
+		u32 out_id;
+
+		/* Avoid unbounded kernel memory allocation */
+		if (crtc_req->count_connectors > config->num_connector) {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		connector_set = kmalloc(crtc_req->count_connectors *
+					sizeof(struct drm_connector *),
+					GFP_KERNEL);
+		if (!connector_set) {
+			ret = -ENOMEM;
+			goto out;
+		}
+
+		for (i = 0; i < crtc_req->count_connectors; i++) {
+			set_connectors_ptr = (uint32_t *)(unsigned long)crtc_req->set_connectors_ptr;
+			if (get_user(out_id, &set_connectors_ptr[i])) {
+				ret = -EFAULT;
+				goto out;
+			}
+
+			obj = drm_mode_object_find(dev, out_id,
+						   DRM_MODE_OBJECT_CONNECTOR);
+			if (!obj) {
+				DRM_DEBUG("Connector id %d unknown\n", out_id);
+				ret = -EINVAL;
+				goto out;
+			}
+			connector = obj_to_connector(obj);
+
+			connector_set[i] = connector;
+		}
+	}
+
+	set.crtc = crtc;
+	set.x = crtc_req->x;
+	set.y = crtc_req->y;
+	set.mode = mode;
+	set.connectors = connector_set;
+	set.num_connectors = crtc_req->count_connectors;
+	set.fb =fb;
+	ret = crtc->funcs->set_config(&set);
+
+out:
+	kfree(connector_set);
+	mutex_unlock(&dev->mode_config.mutex);
+	return ret;
+}
+
+int drm_mode_cursor_ioctl(struct drm_device *dev,
+			void *data, struct drm_file *file_priv)
+{
+	struct drm_mode_cursor *req = data;
+	struct drm_mode_object *obj;
+	struct drm_crtc *crtc;
+	int ret = 0;
+
+	DRM_DEBUG("\n");
+
+	if (!req->flags) {
+		DRM_ERROR("no operation set\n");
+		return -EINVAL;
+	}
+
+	mutex_lock(&dev->mode_config.mutex);
+	obj = drm_mode_object_find(dev, req->crtc, DRM_MODE_OBJECT_CRTC);
+	if (!obj) {
+		DRM_DEBUG("Unknown CRTC ID %d\n", req->crtc);
+		ret = -EINVAL;
+		goto out;
+	}
+	crtc = obj_to_crtc(obj);
+
+	if (req->flags & DRM_MODE_CURSOR_BO) {
+		if (!crtc->funcs->cursor_set) {
+			DRM_ERROR("crtc does not support cursor\n");
+			ret = -ENXIO;
+			goto out;
+		}
+		/* Turns off the cursor if handle is 0 */
+		ret = crtc->funcs->cursor_set(crtc, file_priv, req->handle,
+					      req->width, req->height);
+	}
+
+	if (req->flags & DRM_MODE_CURSOR_MOVE) {
+		if (crtc->funcs->cursor_move) {
+			ret = crtc->funcs->cursor_move(crtc, req->x, req->y);
+		} else {
+			DRM_ERROR("crtc does not support cursor\n");
+			ret = -EFAULT;
+			goto out;
+		}
+	}
+out:
+	mutex_unlock(&dev->mode_config.mutex);
+	return ret;
+}
+
+/**
+ * drm_mode_addfb - add an FB to the graphics configuration
+ * @inode: inode from the ioctl
+ * @filp: file * from the ioctl
+ * @cmd: cmd from ioctl
+ * @arg: arg from ioctl
+ *
+ * LOCKING:
+ * Takes mode config lock.
+ *
+ * Add a new FB to the specified CRTC, given a user request.
+ *
+ * Called by the user via ioctl.
+ *
+ * RETURNS:
+ * Zero on success, errno on failure.
+ */
+int drm_mode_addfb(struct drm_device *dev,
+		   void *data, struct drm_file *file_priv)
+{
+	struct drm_mode_fb_cmd *r = data;
+	struct drm_mode_config *config = &dev->mode_config;
+	struct drm_framebuffer *fb;
+	int ret = 0;
+
+	if ((config->min_width > r->width) || (r->width > config->max_width)) {
+		DRM_ERROR("mode new framebuffer width not within limits\n");
+		return -EINVAL;
+	}
+	if ((config->min_height > r->height) || (r->height > config->max_height)) {
+		DRM_ERROR("mode new framebuffer height not within limits\n");
+		return -EINVAL;
+	}
+
+	mutex_lock(&dev->mode_config.mutex);
+
+	/* TODO check buffer is sufficently large */
+	/* TODO setup destructor callback */
+
+	fb = dev->mode_config.funcs->fb_create(dev, file_priv, r);
+	if (!fb) {
+		DRM_ERROR("could not create framebuffer\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	r->buffer_id = fb->base.id;
+	list_add(&fb->filp_head, &file_priv->fbs);
+
+out:
+	mutex_unlock(&dev->mode_config.mutex);
+	return ret;
+}
+
+/**
+ * drm_mode_rmfb - remove an FB from the configuration
+ * @inode: inode from the ioctl
+ * @filp: file * from the ioctl
+ * @cmd: cmd from ioctl
+ * @arg: arg from ioctl
+ *
+ * LOCKING:
+ * Takes mode config lock.
+ *
+ * Remove the FB specified by the user.
+ *
+ * Called by the user via ioctl.
+ *
+ * RETURNS:
+ * Zero on success, errno on failure.
+ */
+int drm_mode_rmfb(struct drm_device *dev,
+		   void *data, struct drm_file *file_priv)
+{
+	struct drm_mode_object *obj;
+	struct drm_framebuffer *fb = NULL;
+	struct drm_framebuffer *fbl = NULL;
+	uint32_t *id = data;
+	int ret = 0;
+	int found = 0;
+
+	mutex_lock(&dev->mode_config.mutex);
+	obj = drm_mode_object_find(dev, *id, DRM_MODE_OBJECT_FB);
+	/* TODO check that we realy get a framebuffer back. */
+	if (!obj) {
+		DRM_ERROR("mode invalid framebuffer id\n");
+		ret = -EINVAL;
+		goto out;
+	}
+	fb = obj_to_fb(obj);
+
+	list_for_each_entry(fbl, &file_priv->fbs, filp_head)
+		if (fb == fbl)
+			found = 1;
+
+	if (!found) {
+		DRM_ERROR("tried to remove a fb that we didn't own\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* TODO release all crtc connected to the framebuffer */
+	/* TODO unhock the destructor from the buffer object */
+
+	list_del(&fb->filp_head);
+	fb->funcs->destroy(fb);
+
+out:
+	mutex_unlock(&dev->mode_config.mutex);
+	return ret;
+}
+
+/**
+ * drm_mode_getfb - get FB info
+ * @inode: inode from the ioctl
+ * @filp: file * from the ioctl
+ * @cmd: cmd from ioctl
+ * @arg: arg from ioctl
+ *
+ * LOCKING:
+ * Caller? (FIXME)
+ *
+ * Lookup the FB given its ID and return info about it.
+ *
+ * Called by the user via ioctl.
+ *
+ * RETURNS:
+ * Zero on success, errno on failure.
+ */
+int drm_mode_getfb(struct drm_device *dev,
+		   void *data, struct drm_file *file_priv)
+{
+	struct drm_mode_fb_cmd *r = data;
+	struct drm_mode_object *obj;
+	struct drm_framebuffer *fb;
+	int ret = 0;
+
+	mutex_lock(&dev->mode_config.mutex);
+	obj = drm_mode_object_find(dev, r->buffer_id, DRM_MODE_OBJECT_FB);
+	if (!obj) {
+		DRM_ERROR("invalid framebuffer id\n");
+		ret = -EINVAL;
+		goto out;
+	}
+	fb = obj_to_fb(obj);
+
+	r->height = fb->height;
+	r->width = fb->width;
+	r->depth = fb->depth;
+	r->bpp = fb->bits_per_pixel;
+	r->pitch = fb->pitch;
+	fb->funcs->create_handle(fb, file_priv, &r->handle);
+
+out:
+	mutex_unlock(&dev->mode_config.mutex);
+	return ret;
+}
+
+/**
+ * drm_fb_release - remove and free the FBs on this file
+ * @filp: file * from the ioctl
+ *
+ * LOCKING:
+ * Takes mode config lock.
+ *
+ * Destroy all the FBs associated with @filp.
+ *
+ * Called by the user via ioctl.
+ *
+ * RETURNS:
+ * Zero on success, errno on failure.
+ */
+void drm_fb_release(struct file *filp)
+{
+	struct drm_file *priv = filp->private_data;
+	struct drm_device *dev = priv->minor->dev;
+	struct drm_framebuffer *fb, *tfb;
+
+	mutex_lock(&dev->mode_config.mutex);
+	list_for_each_entry_safe(fb, tfb, &priv->fbs, filp_head) {
+		list_del(&fb->filp_head);
+		fb->funcs->destroy(fb);
+	}
+	mutex_unlock(&dev->mode_config.mutex);
+}
+
+/**
+ * drm_mode_attachmode - add a mode to the user mode list
+ * @dev: DRM device
+ * @connector: connector to add the mode to
+ * @mode: mode to add
+ *
+ * Add @mode to @connector's user mode list.
+ */
+static int drm_mode_attachmode(struct drm_device *dev,
+			       struct drm_connector *connector,
+			       struct drm_display_mode *mode)
+{
+	int ret = 0;
+
+	list_add_tail(&mode->head, &connector->user_modes);
+	return ret;
+}
+
+int drm_mode_attachmode_crtc(struct drm_device *dev, struct drm_crtc *crtc,
+			     struct drm_display_mode *mode)
+{
+	struct drm_connector *connector;
+	int ret = 0;
+	struct drm_display_mode *dup_mode;
+	int need_dup = 0;
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		if (!connector->encoder)
+			break;
+		if (connector->encoder->crtc == crtc) {
+			if (need_dup)
+				dup_mode = drm_mode_duplicate(dev, mode);
+			else
+				dup_mode = mode;
+			ret = drm_mode_attachmode(dev, connector, dup_mode);
+			if (ret)
+				return ret;
+			need_dup = 1;
+		}
+	}
+	return 0;
+}
+EXPORT_SYMBOL(drm_mode_attachmode_crtc);
+
+static int drm_mode_detachmode(struct drm_device *dev,
+			       struct drm_connector *connector,
+			       struct drm_display_mode *mode)
+{
+	int found = 0;
+	int ret = 0;
+	struct drm_display_mode *match_mode, *t;
+
+	list_for_each_entry_safe(match_mode, t, &connector->user_modes, head) {
+		if (drm_mode_equal(match_mode, mode)) {
+			list_del(&match_mode->head);
+			drm_mode_destroy(dev, match_mode);
+			found = 1;
+			break;
+		}
+	}
+
+	if (!found)
+		ret = -EINVAL;
+
+	return ret;
+}
+
+int drm_mode_detachmode_crtc(struct drm_device *dev, struct drm_display_mode *mode)
+{
+	struct drm_connector *connector;
+
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		drm_mode_detachmode(dev, connector, mode);
+	}
+	return 0;
+}
+EXPORT_SYMBOL(drm_mode_detachmode_crtc);
+
+/**
+ * drm_fb_attachmode - Attach a user mode to an connector
+ * @inode: inode from the ioctl
+ * @filp: file * from the ioctl
+ * @cmd: cmd from ioctl
+ * @arg: arg from ioctl
+ *
+ * This attaches a user specified mode to an connector.
+ * Called by the user via ioctl.
+ *
+ * RETURNS:
+ * Zero on success, errno on failure.
+ */
+int drm_mode_attachmode_ioctl(struct drm_device *dev,
+			      void *data, struct drm_file *file_priv)
+{
+	struct drm_mode_mode_cmd *mode_cmd = data;
+	struct drm_connector *connector;
+	struct drm_display_mode *mode;
+	struct drm_mode_object *obj;
+	struct drm_mode_modeinfo *umode = &mode_cmd->mode;
+	int ret = 0;
+
+	mutex_lock(&dev->mode_config.mutex);
+
+	obj = drm_mode_object_find(dev, mode_cmd->connector_id, DRM_MODE_OBJECT_CONNECTOR);
+	if (!obj) {
+		ret = -EINVAL;
+		goto out;
+	}
+	connector = obj_to_connector(obj);
+
+	mode = drm_mode_create(dev);
+	if (!mode) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	drm_crtc_convert_umode(mode, umode);
+
+	ret = drm_mode_attachmode(dev, connector, mode);
+out:
+	mutex_unlock(&dev->mode_config.mutex);
+	return ret;
+}
+
+
+/**
+ * drm_fb_detachmode - Detach a user specified mode from an connector
+ * @inode: inode from the ioctl
+ * @filp: file * from the ioctl
+ * @cmd: cmd from ioctl
+ * @arg: arg from ioctl
+ *
+ * Called by the user via ioctl.
+ *
+ * RETURNS:
+ * Zero on success, errno on failure.
+ */
+int drm_mode_detachmode_ioctl(struct drm_device *dev,
+			      void *data, struct drm_file *file_priv)
+{
+	struct drm_mode_object *obj;
+	struct drm_mode_mode_cmd *mode_cmd = data;
+	struct drm_connector *connector;
+	struct drm_display_mode mode;
+	struct drm_mode_modeinfo *umode = &mode_cmd->mode;
+	int ret = 0;
+
+	mutex_lock(&dev->mode_config.mutex);
+
+	obj = drm_mode_object_find(dev, mode_cmd->connector_id, DRM_MODE_OBJECT_CONNECTOR);
+	if (!obj) {
+		ret = -EINVAL;
+		goto out;
+	}
+	connector = obj_to_connector(obj);
+
+	drm_crtc_convert_umode(&mode, umode);
+	ret = drm_mode_detachmode(dev, connector, &mode);
+out:
+	mutex_unlock(&dev->mode_config.mutex);
+	return ret;
+}
+
+struct drm_property *drm_property_create(struct drm_device *dev, int flags,
+					 const char *name, int num_values)
+{
+	struct drm_property *property = NULL;
+
+	property = kzalloc(sizeof(struct drm_property), GFP_KERNEL);
+	if (!property)
+		return NULL;
+
+	if (num_values) {
+		property->values = kzalloc(sizeof(uint64_t)*num_values, GFP_KERNEL);
+		if (!property->values)
+			goto fail;
+	}
+
+	drm_mode_object_get(dev, &property->base, DRM_MODE_OBJECT_PROPERTY);
+	property->flags = flags;
+	property->num_values = num_values;
+	INIT_LIST_HEAD(&property->enum_blob_list);
+
+	if (name)
+		strncpy(property->name, name, DRM_PROP_NAME_LEN);
+
+	list_add_tail(&property->head, &dev->mode_config.property_list);
+	return property;
+fail:
+	kfree(property);
+	return NULL;
+}
+EXPORT_SYMBOL(drm_property_create);
+
+int drm_property_add_enum(struct drm_property *property, int index,
+			  uint64_t value, const char *name)
+{
+	struct drm_property_enum *prop_enum;
+
+	if (!(property->flags & DRM_MODE_PROP_ENUM))
+		return -EINVAL;
+
+	if (!list_empty(&property->enum_blob_list)) {
+		list_for_each_entry(prop_enum, &property->enum_blob_list, head) {
+			if (prop_enum->value == value) {
+				strncpy(prop_enum->name, name, DRM_PROP_NAME_LEN);
+				prop_enum->name[DRM_PROP_NAME_LEN-1] = '\0';
+				return 0;
+			}
+		}
+	}
+
+	prop_enum = kzalloc(sizeof(struct drm_property_enum), GFP_KERNEL);
+	if (!prop_enum)
+		return -ENOMEM;
+
+	strncpy(prop_enum->name, name, DRM_PROP_NAME_LEN);
+	prop_enum->name[DRM_PROP_NAME_LEN-1] = '\0';
+	prop_enum->value = value;
+
+	property->values[index] = value;
+	list_add_tail(&prop_enum->head, &property->enum_blob_list);
+	return 0;
+}
+EXPORT_SYMBOL(drm_property_add_enum);
+
+void drm_property_destroy(struct drm_device *dev, struct drm_property *property)
+{
+	struct drm_property_enum *prop_enum, *pt;
+
+	list_for_each_entry_safe(prop_enum, pt, &property->enum_blob_list, head) {
+		list_del(&prop_enum->head);
+		kfree(prop_enum);
+	}
+
+	if (property->num_values)
+		kfree(property->values);
+	drm_mode_object_put(dev, &property->base);
+	list_del(&property->head);
+	kfree(property);
+}
+EXPORT_SYMBOL(drm_property_destroy);
+
+int drm_connector_attach_property(struct drm_connector *connector,
+			       struct drm_property *property, uint64_t init_val)
+{
+	int i;
+
+	for (i = 0; i < DRM_CONNECTOR_MAX_PROPERTY; i++) {
+		if (connector->property_ids[i] == 0) {
+			connector->property_ids[i] = property->base.id;
+			connector->property_values[i] = init_val;
+			break;
+		}
+	}
+
+	if (i == DRM_CONNECTOR_MAX_PROPERTY)
+		return -EINVAL;
+	return 0;
+}
+EXPORT_SYMBOL(drm_connector_attach_property);
+
+int drm_connector_property_set_value(struct drm_connector *connector,
+				  struct drm_property *property, uint64_t value)
+{
+	int i;
+
+	for (i = 0; i < DRM_CONNECTOR_MAX_PROPERTY; i++) {
+		if (connector->property_ids[i] == property->base.id) {
+			connector->property_values[i] = value;
+			break;
+		}
+	}
+
+	if (i == DRM_CONNECTOR_MAX_PROPERTY)
+		return -EINVAL;
+	return 0;
+}
+EXPORT_SYMBOL(drm_connector_property_set_value);
+
+int drm_connector_property_get_value(struct drm_connector *connector,
+				  struct drm_property *property, uint64_t *val)
+{
+	int i;
+
+	for (i = 0; i < DRM_CONNECTOR_MAX_PROPERTY; i++) {
+		if (connector->property_ids[i] == property->base.id) {
+			*val = connector->property_values[i];
+			break;
+		}
+	}
+
+	if (i == DRM_CONNECTOR_MAX_PROPERTY)
+		return -EINVAL;
+	return 0;
+}
+EXPORT_SYMBOL(drm_connector_property_get_value);
+
+int drm_mode_getproperty_ioctl(struct drm_device *dev,
+			       void *data, struct drm_file *file_priv)
+{
+	struct drm_mode_object *obj;
+	struct drm_mode_get_property *out_resp = data;
+	struct drm_property *property;
+	int enum_count = 0;
+	int blob_count = 0;
+	int value_count = 0;
+	int ret = 0, i;
+	int copied;
+	struct drm_property_enum *prop_enum;
+	struct drm_mode_property_enum __user *enum_ptr;
+	struct drm_property_blob *prop_blob;
+	uint32_t *blob_id_ptr;
+	uint64_t __user *values_ptr;
+	uint32_t __user *blob_length_ptr;
+
+	mutex_lock(&dev->mode_config.mutex);
+	obj = drm_mode_object_find(dev, out_resp->prop_id, DRM_MODE_OBJECT_PROPERTY);
+	if (!obj) {
+		ret = -EINVAL;
+		goto done;
+	}
+	property = obj_to_property(obj);
+
+	if (property->flags & DRM_MODE_PROP_ENUM) {
+		list_for_each_entry(prop_enum, &property->enum_blob_list, head)
+			enum_count++;
+	} else if (property->flags & DRM_MODE_PROP_BLOB) {
+		list_for_each_entry(prop_blob, &property->enum_blob_list, head)
+			blob_count++;
+	}
+
+	value_count = property->num_values;
+
+	strncpy(out_resp->name, property->name, DRM_PROP_NAME_LEN);
+	out_resp->name[DRM_PROP_NAME_LEN-1] = 0;
+	out_resp->flags = property->flags;
+
+	if ((out_resp->count_values >= value_count) && value_count) {
+		values_ptr = (uint64_t *)(unsigned long)out_resp->values_ptr;
+		for (i = 0; i < value_count; i++) {
+			if (copy_to_user(values_ptr + i, &property->values[i], sizeof(uint64_t))) {
+				ret = -EFAULT;
+				goto done;
+			}
+		}
+	}
+	out_resp->count_values = value_count;
+
+	if (property->flags & DRM_MODE_PROP_ENUM) {
+		if ((out_resp->count_enum_blobs >= enum_count) && enum_count) {
+			copied = 0;
+			enum_ptr = (struct drm_mode_property_enum *)(unsigned long)out_resp->enum_blob_ptr;
+			list_for_each_entry(prop_enum, &property->enum_blob_list, head) {
+
+				if (copy_to_user(&enum_ptr[copied].value, &prop_enum->value, sizeof(uint64_t))) {
+					ret = -EFAULT;
+					goto done;
+				}
+
+				if (copy_to_user(&enum_ptr[copied].name,
+						 &prop_enum->name, DRM_PROP_NAME_LEN)) {
+					ret = -EFAULT;
+					goto done;
+				}
+				copied++;
+			}
+		}
+		out_resp->count_enum_blobs = enum_count;
+	}
+
+	if (property->flags & DRM_MODE_PROP_BLOB) {
+		if ((out_resp->count_enum_blobs >= blob_count) && blob_count) {
+			copied = 0;
+			blob_id_ptr = (uint32_t *)(unsigned long)out_resp->enum_blob_ptr;
+			blob_length_ptr = (uint32_t *)(unsigned long)out_resp->values_ptr;
+
+			list_for_each_entry(prop_blob, &property->enum_blob_list, head) {
+				if (put_user(prop_blob->base.id, blob_id_ptr + copied)) {
+					ret = -EFAULT;
+					goto done;
+				}
+
+				if (put_user(prop_blob->length, blob_length_ptr + copied)) {
+					ret = -EFAULT;
+					goto done;
+				}
+
+				copied++;
+			}
+		}
+		out_resp->count_enum_blobs = blob_count;
+	}
+done:
+	mutex_unlock(&dev->mode_config.mutex);
+	return ret;
+}
+
+static struct drm_property_blob *drm_property_create_blob(struct drm_device *dev, int length,
+							  void *data)
+{
+	struct drm_property_blob *blob;
+
+	if (!length || !data)
+		return NULL;
+
+	blob = kzalloc(sizeof(struct drm_property_blob)+length, GFP_KERNEL);
+	if (!blob)
+		return NULL;
+
+	blob->data = (void *)((char *)blob + sizeof(struct drm_property_blob));
+	blob->length = length;
+
+	memcpy(blob->data, data, length);
+
+	drm_mode_object_get(dev, &blob->base, DRM_MODE_OBJECT_BLOB);
+
+	list_add_tail(&blob->head, &dev->mode_config.property_blob_list);
+	return blob;
+}
+
+static void drm_property_destroy_blob(struct drm_device *dev,
+			       struct drm_property_blob *blob)
+{
+	drm_mode_object_put(dev, &blob->base);
+	list_del(&blob->head);
+	kfree(blob);
+}
+
+int drm_mode_getblob_ioctl(struct drm_device *dev,
+			   void *data, struct drm_file *file_priv)
+{
+	struct drm_mode_object *obj;
+	struct drm_mode_get_blob *out_resp = data;
+	struct drm_property_blob *blob;
+	int ret = 0;
+	void *blob_ptr;
+
+	mutex_lock(&dev->mode_config.mutex);
+	obj = drm_mode_object_find(dev, out_resp->blob_id, DRM_MODE_OBJECT_BLOB);
+	if (!obj) {
+		ret = -EINVAL;
+		goto done;
+	}
+	blob = obj_to_blob(obj);
+
+	if (out_resp->length == blob->length) {
+		blob_ptr = (void *)(unsigned long)out_resp->data;
+		if (copy_to_user(blob_ptr, blob->data, blob->length)){
+			ret = -EFAULT;
+			goto done;
+		}
+	}
+	out_resp->length = blob->length;
+
+done:
+	mutex_unlock(&dev->mode_config.mutex);
+	return ret;
+}
+
+int drm_mode_connector_update_edid_property(struct drm_connector *connector,
+					    struct edid *edid)
+{
+	struct drm_device *dev = connector->dev;
+	int ret = 0;
+
+	if (connector->edid_blob_ptr)
+		drm_property_destroy_blob(dev, connector->edid_blob_ptr);
+
+	/* Delete edid, when there is none. */
+	if (!edid) {
+		connector->edid_blob_ptr = NULL;
+		ret = drm_connector_property_set_value(connector, dev->mode_config.edid_property, 0);
+		return ret;
+	}
+
+	connector->edid_blob_ptr = drm_property_create_blob(connector->dev, 128, edid);
+
+	ret = drm_connector_property_set_value(connector,
+					       dev->mode_config.edid_property,
+					       connector->edid_blob_ptr->base.id);
+
+	return ret;
+}
+EXPORT_SYMBOL(drm_mode_connector_update_edid_property);
+
+int drm_mode_connector_property_set_ioctl(struct drm_device *dev,
+				       void *data, struct drm_file *file_priv)
+{
+	struct drm_mode_connector_set_property *out_resp = data;
+	struct drm_mode_object *obj;
+	struct drm_property *property;
+	struct drm_connector *connector;
+	int ret = -EINVAL;
+	int i;
+
+	mutex_lock(&dev->mode_config.mutex);
+
+	obj = drm_mode_object_find(dev, out_resp->connector_id, DRM_MODE_OBJECT_CONNECTOR);
+	if (!obj) {
+		goto out;
+	}
+	connector = obj_to_connector(obj);
+
+	for (i = 0; i < DRM_CONNECTOR_MAX_PROPERTY; i++) {
+		if (connector->property_ids[i] == out_resp->prop_id)
+			break;
+	}
+
+	if (i == DRM_CONNECTOR_MAX_PROPERTY) {
+		goto out;
+	}
+
+	obj = drm_mode_object_find(dev, out_resp->prop_id, DRM_MODE_OBJECT_PROPERTY);
+	if (!obj) {
+		goto out;
+	}
+	property = obj_to_property(obj);
+
+	if (property->flags & DRM_MODE_PROP_IMMUTABLE)
+		goto out;
+
+	if (property->flags & DRM_MODE_PROP_RANGE) {
+		if (out_resp->value < property->values[0])
+			goto out;
+
+		if (out_resp->value > property->values[1])
+			goto out;
+	} else {
+		int found = 0;
+		for (i = 0; i < property->num_values; i++) {
+			if (property->values[i] == out_resp->value) {
+				found = 1;
+				break;
+			}
+		}
+		if (!found) {
+			goto out;
+		}
+	}
+
+	if (connector->funcs->set_property)
+		ret = connector->funcs->set_property(connector, property, out_resp->value);
+
+	/* store the property value if succesful */
+	if (!ret)
+		drm_connector_property_set_value(connector, property, out_resp->value);
+out:
+	mutex_unlock(&dev->mode_config.mutex);
+	return ret;
+}
+
+
+int drm_mode_replacefb(struct drm_device *dev,
+		       void *data, struct drm_file *file_priv)
+{
+	struct drm_mode_fb_cmd *r = data;
+	struct drm_mode_object *obj;
+	struct drm_framebuffer *fb;
+	int found = 0;
+	struct drm_framebuffer *fbl = NULL;
+	int ret = 0;
+
+	/* right replace the current bo attached to this fb with a new bo */
+	mutex_lock(&dev->mode_config.mutex);
+	obj = drm_mode_object_find(dev, r->buffer_id, DRM_MODE_OBJECT_FB);
+	if (!obj) {
+		ret = -EINVAL;
+		goto out;
+	}
+	fb = obj_to_fb(obj);
+
+	list_for_each_entry(fbl, &file_priv->fbs, filp_head)
+		if (fb == fbl)
+			found = 1;
+
+	if (!found) {
+		DRM_ERROR("tried to replace an fb we didn't own\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (dev->mode_config.funcs->resize_fb)
+		ret = dev->mode_config.funcs->resize_fb(dev, file_priv, fb, r);
+	else
+		ret = -EINVAL;
+out:
+	mutex_unlock(&dev->mode_config.mutex);
+	return ret;
+
+}
+
+int drm_mode_connector_attach_encoder(struct drm_connector *connector,
+				      struct drm_encoder *encoder)
+{
+	int i;
+
+	for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
+		if (connector->encoder_ids[i] == 0) {
+			connector->encoder_ids[i] = encoder->base.id;
+			return 0;
+		}
+	}
+	return -ENOMEM;
+}
+EXPORT_SYMBOL(drm_mode_connector_attach_encoder);
+
+void drm_mode_connector_detach_encoder(struct drm_connector *connector,
+				    struct drm_encoder *encoder)
+{
+	int i;
+	for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
+		if (connector->encoder_ids[i] == encoder->base.id) {
+			connector->encoder_ids[i] = 0;
+			if (connector->encoder == encoder)
+				connector->encoder = NULL;
+			break;
+		}
+	}
+}
+EXPORT_SYMBOL(drm_mode_connector_detach_encoder);
+
+bool drm_mode_crtc_set_gamma_size(struct drm_crtc *crtc,
+				  int gamma_size)
+{
+	crtc->gamma_size = gamma_size;
+
+	crtc->gamma_store = kzalloc(gamma_size * sizeof(uint16_t) * 3, GFP_KERNEL);
+	if (!crtc->gamma_store) {
+		crtc->gamma_size = 0;
+		return false;
+	}
+
+	return true;
+}
+EXPORT_SYMBOL(drm_mode_crtc_set_gamma_size);
+
+int drm_mode_gamma_set_ioctl(struct drm_device *dev,
+			     void *data, struct drm_file *file_priv)
+{
+	struct drm_mode_crtc_lut *crtc_lut = data;
+	struct drm_mode_object *obj;
+	struct drm_crtc *crtc;
+	void *r_base, *g_base, *b_base;
+	int size;
+	int ret = 0;
+
+	mutex_lock(&dev->mode_config.mutex);
+	obj = drm_mode_object_find(dev, crtc_lut->crtc_id, DRM_MODE_OBJECT_CRTC);
+	if (!obj) {
+		ret = -EINVAL;
+		goto out;
+	}
+	crtc = obj_to_crtc(obj);
+
+	/* memcpy into gamma store */
+	if (crtc_lut->gamma_size != crtc->gamma_size) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	size = crtc_lut->gamma_size * (sizeof(uint16_t));
+	r_base = crtc->gamma_store;
+	if (copy_from_user(r_base, (void __user *)(unsigned long)crtc_lut->red, size)) {
+		ret = -EFAULT;
+		goto out;
+	}
+
+	g_base = r_base + size;
+	if (copy_from_user(g_base, (void __user *)(unsigned long)crtc_lut->green, size)) {
+		ret = -EFAULT;
+		goto out;
+	}
+
+	b_base = g_base + size;
+	if (copy_from_user(b_base, (void __user *)(unsigned long)crtc_lut->blue, size)) {
+		ret = -EFAULT;
+		goto out;
+	}
+
+	crtc->funcs->gamma_set(crtc, r_base, g_base, b_base, crtc->gamma_size);
+
+out:
+	mutex_unlock(&dev->mode_config.mutex);
+	return ret;
+
+}
+
+int drm_mode_gamma_get_ioctl(struct drm_device *dev,
+			     void *data, struct drm_file *file_priv)
+{
+	struct drm_mode_crtc_lut *crtc_lut = data;
+	struct drm_mode_object *obj;
+	struct drm_crtc *crtc;
+	void *r_base, *g_base, *b_base;
+	int size;
+	int ret = 0;
+
+	mutex_lock(&dev->mode_config.mutex);
+	obj = drm_mode_object_find(dev, crtc_lut->crtc_id, DRM_MODE_OBJECT_CRTC);
+	if (!obj) {
+		ret = -EINVAL;
+		goto out;
+	}
+	crtc = obj_to_crtc(obj);
+
+	/* memcpy into gamma store */
+	if (crtc_lut->gamma_size != crtc->gamma_size) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	size = crtc_lut->gamma_size * (sizeof(uint16_t));
+	r_base = crtc->gamma_store;
+	if (copy_to_user((void __user *)(unsigned long)crtc_lut->red, r_base, size)) {
+		ret = -EFAULT;
+		goto out;
+	}
+
+	g_base = r_base + size;
+	if (copy_to_user((void __user *)(unsigned long)crtc_lut->green, g_base, size)) {
+		ret = -EFAULT;
+		goto out;
+	}
+
+	b_base = g_base + size;
+	if (copy_to_user((void __user *)(unsigned long)crtc_lut->blue, b_base, size)) {
+		ret = -EFAULT;
+		goto out;
+	}
+out:
+	mutex_unlock(&dev->mode_config.mutex);
+	return ret;
+}
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
new file mode 100644
index 0000000..887ed33
--- /dev/null
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -0,0 +1,822 @@
+/*
+ * Copyright (c) 2006-2008 Intel Corporation
+ * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
+ *
+ * DRM core CRTC related functions
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission.  The copyright holders make no representations
+ * about the suitability of this software for any purpose.  It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ *
+ * Authors:
+ *      Keith Packard
+ *	Eric Anholt <eric@anholt.net>
+ *      Dave Airlie <airlied@linux.ie>
+ *      Jesse Barnes <jesse.barnes@intel.com>
+ */
+
+#include "drmP.h"
+#include "drm_crtc.h"
+#include "drm_crtc_helper.h"
+
+/*
+ * Detailed mode info for a standard 640x480@60Hz monitor
+ */
+static struct drm_display_mode std_mode[] = {
+	{ DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 25200, 640, 656,
+		   752, 800, 0, 480, 490, 492, 525, 0,
+		   DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) },
+};
+
+/**
+ * drm_helper_probe_connector_modes - get complete set of display modes
+ * @dev: DRM device
+ * @maxX: max width for modes
+ * @maxY: max height for modes
+ *
+ * LOCKING:
+ * Caller must hold mode config lock.
+ *
+ * Based on @dev's mode_config layout, scan all the connectors and try to detect
+ * modes on them.  Modes will first be added to the connector's probed_modes
+ * list, then culled (based on validity and the @maxX, @maxY parameters) and
+ * put into the normal modes list.
+ *
+ * Intended to be used either at bootup time or when major configuration
+ * changes have occurred.
+ *
+ * FIXME: take into account monitor limits
+ */
+void drm_helper_probe_single_connector_modes(struct drm_connector *connector,
+					     uint32_t maxX, uint32_t maxY)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_display_mode *mode, *t;
+	struct drm_connector_helper_funcs *connector_funcs =
+		connector->helper_private;
+	int ret;
+
+	DRM_DEBUG("%s\n", drm_get_connector_name(connector));
+	/* set all modes to the unverified state */
+	list_for_each_entry_safe(mode, t, &connector->modes, head)
+		mode->status = MODE_UNVERIFIED;
+
+	connector->status = connector->funcs->detect(connector);
+
+	if (connector->status == connector_status_disconnected) {
+		DRM_DEBUG("%s is disconnected\n",
+			  drm_get_connector_name(connector));
+		/* TODO set EDID to NULL */
+		return;
+	}
+
+	ret = (*connector_funcs->get_modes)(connector);
+
+	if (ret) {
+		drm_mode_connector_list_update(connector);
+	}
+
+	if (maxX && maxY)
+		drm_mode_validate_size(dev, &connector->modes, maxX,
+				       maxY, 0);
+	list_for_each_entry_safe(mode, t, &connector->modes, head) {
+		if (mode->status == MODE_OK)
+			mode->status = connector_funcs->mode_valid(connector,
+								   mode);
+	}
+
+
+	drm_mode_prune_invalid(dev, &connector->modes, true);
+
+	if (list_empty(&connector->modes)) {
+		struct drm_display_mode *stdmode;
+
+		DRM_DEBUG("No valid modes on %s\n",
+			  drm_get_connector_name(connector));
+
+		/* Should we do this here ???
+		 * When no valid EDID modes are available we end up
+		 * here and bailed in the past, now we add a standard
+		 * 640x480@60Hz mode and carry on.
+		 */
+		stdmode = drm_mode_duplicate(dev, &std_mode[0]);
+		drm_mode_probed_add(connector, stdmode);
+		drm_mode_list_concat(&connector->probed_modes,
+				     &connector->modes);
+
+		DRM_DEBUG("Adding standard 640x480 @ 60Hz to %s\n",
+			  drm_get_connector_name(connector));
+	}
+
+	drm_mode_sort(&connector->modes);
+
+	DRM_DEBUG("Probed modes for %s\n", drm_get_connector_name(connector));
+	list_for_each_entry_safe(mode, t, &connector->modes, head) {
+		mode->vrefresh = drm_mode_vrefresh(mode);
+
+		drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
+		drm_mode_debug_printmodeline(mode);
+	}
+}
+EXPORT_SYMBOL(drm_helper_probe_single_connector_modes);
+
+void drm_helper_probe_connector_modes(struct drm_device *dev, uint32_t maxX,
+				      uint32_t maxY)
+{
+	struct drm_connector *connector;
+
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		drm_helper_probe_single_connector_modes(connector, maxX, maxY);
+	}
+}
+EXPORT_SYMBOL(drm_helper_probe_connector_modes);
+
+
+/**
+ * drm_helper_crtc_in_use - check if a given CRTC is in a mode_config
+ * @crtc: CRTC to check
+ *
+ * LOCKING:
+ * Caller must hold mode config lock.
+ *
+ * Walk @crtc's DRM device's mode_config and see if it's in use.
+ *
+ * RETURNS:
+ * True if @crtc is part of the mode_config, false otherwise.
+ */
+bool drm_helper_crtc_in_use(struct drm_crtc *crtc)
+{
+	struct drm_encoder *encoder;
+	struct drm_device *dev = crtc->dev;
+	/* FIXME: Locking around list access? */
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head)
+		if (encoder->crtc == crtc)
+			return true;
+	return false;
+}
+EXPORT_SYMBOL(drm_helper_crtc_in_use);
+
+/**
+ * drm_disable_unused_functions - disable unused objects
+ * @dev: DRM device
+ *
+ * LOCKING:
+ * Caller must hold mode config lock.
+ *
+ * If an connector or CRTC isn't part of @dev's mode_config, it can be disabled
+ * by calling its dpms function, which should power it off.
+ */
+void drm_helper_disable_unused_functions(struct drm_device *dev)
+{
+	struct drm_encoder *encoder;
+	struct drm_encoder_helper_funcs *encoder_funcs;
+	struct drm_crtc *crtc;
+
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+		encoder_funcs = encoder->helper_private;
+		if (!encoder->crtc)
+			(*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF);
+	}
+
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+		crtc->enabled = drm_helper_crtc_in_use(crtc);
+		if (!crtc->enabled) {
+			crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
+			crtc->fb = NULL;
+		}
+	}
+}
+EXPORT_SYMBOL(drm_helper_disable_unused_functions);
+
+static struct drm_display_mode *drm_has_preferred_mode(struct drm_connector *connector, int width, int height)
+{
+	struct drm_display_mode *mode;
+
+	list_for_each_entry(mode, &connector->modes, head) {
+		if (drm_mode_width(mode) > width ||
+		    drm_mode_height(mode) > height)
+			continue;
+		if (mode->type & DRM_MODE_TYPE_PREFERRED)
+			return mode;
+	}
+	return NULL;
+}
+
+static bool drm_connector_enabled(struct drm_connector *connector, bool strict)
+{
+	bool enable;
+
+	if (strict) {
+		enable = connector->status == connector_status_connected;
+	} else {
+		enable = connector->status != connector_status_disconnected;
+	}
+	return enable;
+}
+
+static void drm_enable_connectors(struct drm_device *dev, bool *enabled)
+{
+	bool any_enabled = false;
+	struct drm_connector *connector;
+	int i = 0;
+
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		enabled[i] = drm_connector_enabled(connector, true);
+		any_enabled |= enabled[i];
+		i++;
+	}
+
+	if (any_enabled)
+		return;
+
+	i = 0;
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		enabled[i] = drm_connector_enabled(connector, false);
+		i++;
+	}
+}
+
+static bool drm_target_preferred(struct drm_device *dev,
+				 struct drm_display_mode **modes,
+				 bool *enabled, int width, int height)
+{
+	struct drm_connector *connector;
+	int i = 0;
+
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+
+		if (enabled[i] == false) {
+			i++;
+			continue;
+		}
+
+		modes[i] = drm_has_preferred_mode(connector, width, height);
+		if (!modes[i]) {
+			list_for_each_entry(modes[i], &connector->modes, head)
+				break;
+		}
+		i++;
+	}
+	return true;
+}
+
+static int drm_pick_crtcs(struct drm_device *dev,
+			  struct drm_crtc **best_crtcs,
+			  struct drm_display_mode **modes,
+			  int n, int width, int height)
+{
+	int c, o;
+	struct drm_connector *connector;
+	struct drm_connector_helper_funcs *connector_funcs;
+	struct drm_encoder *encoder;
+	struct drm_crtc *best_crtc;
+	int my_score, best_score, score;
+	struct drm_crtc **crtcs, *crtc;
+
+	if (n == dev->mode_config.num_connector)
+		return 0;
+	c = 0;
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		if (c == n)
+			break;
+		c++;
+	}
+
+	best_crtcs[n] = NULL;
+	best_crtc = NULL;
+	best_score = drm_pick_crtcs(dev, best_crtcs, modes, n+1, width, height);
+	if (modes[n] == NULL)
+		return best_score;
+
+	crtcs = kmalloc(dev->mode_config.num_connector *
+			sizeof(struct drm_crtc *), GFP_KERNEL);
+	if (!crtcs)
+		return best_score;
+
+	my_score = 1;
+	if (connector->status == connector_status_connected)
+		my_score++;
+	if (drm_has_preferred_mode(connector, width, height))
+		my_score++;
+
+	connector_funcs = connector->helper_private;
+	encoder = connector_funcs->best_encoder(connector);
+	if (!encoder)
+		goto out;
+
+	connector->encoder = encoder;
+
+	/* select a crtc for this connector and then attempt to configure
+	   remaining connectors */
+	c = 0;
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+
+		if ((connector->encoder->possible_crtcs & (1 << c)) == 0) {
+			c++;
+			continue;
+		}
+
+		for (o = 0; o < n; o++)
+			if (best_crtcs[o] == crtc)
+				break;
+
+		if (o < n) {
+			/* ignore cloning for now */
+			c++;
+			continue;
+		}
+
+		crtcs[n] = crtc;
+		memcpy(crtcs, best_crtcs, n * sizeof(struct drm_crtc *));
+		score = my_score + drm_pick_crtcs(dev, crtcs, modes, n + 1,
+						  width, height);
+		if (score > best_score) {
+			best_crtc = crtc;
+			best_score = score;
+			memcpy(best_crtcs, crtcs,
+			       dev->mode_config.num_connector *
+			       sizeof(struct drm_crtc *));
+		}
+		c++;
+	}
+out:
+	kfree(crtcs);
+	return best_score;
+}
+
+static void drm_setup_crtcs(struct drm_device *dev)
+{
+	struct drm_crtc **crtcs;
+	struct drm_display_mode **modes;
+	struct drm_encoder *encoder;
+	struct drm_connector *connector;
+	bool *enabled;
+	int width, height;
+	int i, ret;
+
+	width = dev->mode_config.max_width;
+	height = dev->mode_config.max_height;
+
+	/* clean out all the encoder/crtc combos */
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+		encoder->crtc = NULL;
+	}
+
+	crtcs = kcalloc(dev->mode_config.num_connector,
+			sizeof(struct drm_crtc *), GFP_KERNEL);
+	modes = kcalloc(dev->mode_config.num_connector,
+			sizeof(struct drm_display_mode *), GFP_KERNEL);
+	enabled = kcalloc(dev->mode_config.num_connector,
+			  sizeof(bool), GFP_KERNEL);
+
+	drm_enable_connectors(dev, enabled);
+
+	ret = drm_target_preferred(dev, modes, enabled, width, height);
+	if (!ret)
+		DRM_ERROR("Unable to find initial modes\n");
+
+	drm_pick_crtcs(dev, crtcs, modes, 0, width, height);
+
+	i = 0;
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		struct drm_display_mode *mode = modes[i];
+		struct drm_crtc *crtc = crtcs[i];
+
+		if (connector->encoder == NULL) {
+			i++;
+			continue;
+		}
+
+		if (mode && crtc) {
+			crtc->desired_mode = mode;
+			connector->encoder->crtc = crtc;
+		} else
+			connector->encoder->crtc = NULL;
+		i++;
+	}
+
+	kfree(crtcs);
+	kfree(modes);
+	kfree(enabled);
+}
+/**
+ * drm_crtc_set_mode - set a mode
+ * @crtc: CRTC to program
+ * @mode: mode to use
+ * @x: width of mode
+ * @y: height of mode
+ *
+ * LOCKING:
+ * Caller must hold mode config lock.
+ *
+ * Try to set @mode on @crtc.  Give @crtc and its associated connectors a chance
+ * to fixup or reject the mode prior to trying to set it.
+ *
+ * RETURNS:
+ * True if the mode was set successfully, or false otherwise.
+ */
+bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
+			      struct drm_display_mode *mode,
+			      int x, int y)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_display_mode *adjusted_mode, saved_mode;
+	struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+	struct drm_encoder_helper_funcs *encoder_funcs;
+	int saved_x, saved_y;
+	struct drm_encoder *encoder;
+	bool ret = true;
+
+	adjusted_mode = drm_mode_duplicate(dev, mode);
+
+	crtc->enabled = drm_helper_crtc_in_use(crtc);
+
+	if (!crtc->enabled)
+		return true;
+
+	saved_mode = crtc->mode;
+	saved_x = crtc->x;
+	saved_y = crtc->y;
+
+	/* Update crtc values up front so the driver can rely on them for mode
+	 * setting.
+	 */
+	crtc->mode = *mode;
+	crtc->x = x;
+	crtc->y = y;
+
+	if (drm_mode_equal(&saved_mode, &crtc->mode)) {
+		if (saved_x != crtc->x || saved_y != crtc->y) {
+			crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y);
+			goto done;
+		}
+	}
+
+	/* Pass our mode to the connectors and the CRTC to give them a chance to
+	 * adjust it according to limitations or connector properties, and also
+	 * a chance to reject the mode entirely.
+	 */
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+
+		if (encoder->crtc != crtc)
+			continue;
+		encoder_funcs = encoder->helper_private;
+		if (!(ret = encoder_funcs->mode_fixup(encoder, mode,
+						      adjusted_mode))) {
+			goto done;
+		}
+	}
+
+	if (!(ret = crtc_funcs->mode_fixup(crtc, mode, adjusted_mode))) {
+		goto done;
+	}
+
+	/* Prepare the encoders and CRTCs before setting the mode. */
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+
+		if (encoder->crtc != crtc)
+			continue;
+		encoder_funcs = encoder->helper_private;
+		/* Disable the encoders as the first thing we do. */
+		encoder_funcs->prepare(encoder);
+	}
+
+	crtc_funcs->prepare(crtc);
+
+	/* Set up the DPLL and any encoders state that needs to adjust or depend
+	 * on the DPLL.
+	 */
+	crtc_funcs->mode_set(crtc, mode, adjusted_mode, x, y);
+
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+
+		if (encoder->crtc != crtc)
+			continue;
+
+		DRM_INFO("%s: set mode %s %x\n", drm_get_encoder_name(encoder),
+			 mode->name, mode->base.id);
+		encoder_funcs = encoder->helper_private;
+		encoder_funcs->mode_set(encoder, mode, adjusted_mode);
+	}
+
+	/* Now enable the clocks, plane, pipe, and connectors that we set up. */
+	crtc_funcs->commit(crtc);
+
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+
+		if (encoder->crtc != crtc)
+			continue;
+
+		encoder_funcs = encoder->helper_private;
+		encoder_funcs->commit(encoder);
+
+	}
+
+	/* XXX free adjustedmode */
+	drm_mode_destroy(dev, adjusted_mode);
+	/* FIXME: add subpixel order */
+done:
+	if (!ret) {
+		crtc->mode = saved_mode;
+		crtc->x = saved_x;
+		crtc->y = saved_y;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(drm_crtc_helper_set_mode);
+
+
+/**
+ * drm_crtc_helper_set_config - set a new config from userspace
+ * @crtc: CRTC to setup
+ * @crtc_info: user provided configuration
+ * @new_mode: new mode to set
+ * @connector_set: set of connectors for the new config
+ * @fb: new framebuffer
+ *
+ * LOCKING:
+ * Caller must hold mode config lock.
+ *
+ * Setup a new configuration, provided by the user in @crtc_info, and enable
+ * it.
+ *
+ * RETURNS:
+ * Zero. (FIXME)
+ */
+int drm_crtc_helper_set_config(struct drm_mode_set *set)
+{
+	struct drm_device *dev;
+	struct drm_crtc **save_crtcs, *new_crtc;
+	struct drm_encoder **save_encoders, *new_encoder;
+	bool save_enabled;
+	bool changed = false;
+	bool flip_or_move = false;
+	struct drm_connector *connector;
+	int count = 0, ro, fail = 0;
+	struct drm_crtc_helper_funcs *crtc_funcs;
+	int ret = 0;
+
+	DRM_DEBUG("\n");
+
+	if (!set)
+		return -EINVAL;
+
+	if (!set->crtc)
+		return -EINVAL;
+
+	if (!set->crtc->helper_private)
+		return -EINVAL;
+
+	crtc_funcs = set->crtc->helper_private;
+
+	DRM_DEBUG("crtc: %p %d fb: %p connectors: %p num_connectors: %d (x, y) (%i, %i)\n",
+		  set->crtc, set->crtc->base.id, set->fb, set->connectors,
+		  (int)set->num_connectors, set->x, set->y);
+
+	dev = set->crtc->dev;
+
+	/* save previous config */
+	save_enabled = set->crtc->enabled;
+
+	/* this is meant to be num_connector not num_crtc */
+	save_crtcs = kzalloc(dev->mode_config.num_connector *
+			     sizeof(struct drm_crtc *), GFP_KERNEL);
+	if (!save_crtcs)
+		return -ENOMEM;
+
+	save_encoders = kzalloc(dev->mode_config.num_connector *
+				sizeof(struct drm_encoders *), GFP_KERNEL);
+	if (!save_encoders) {
+		kfree(save_crtcs);
+		return -ENOMEM;
+	}
+
+	/* We should be able to check here if the fb has the same properties
+	 * and then just flip_or_move it */
+	if (set->crtc->fb != set->fb) {
+		/* if we have no fb then its a change not a flip */
+		if (set->crtc->fb == NULL)
+			changed = true;
+		else
+			flip_or_move = true;
+	}
+
+	if (set->x != set->crtc->x || set->y != set->crtc->y)
+		flip_or_move = true;
+
+	if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) {
+		DRM_DEBUG("modes are different\n");
+		drm_mode_debug_printmodeline(&set->crtc->mode);
+		drm_mode_debug_printmodeline(set->mode);
+		changed = true;
+	}
+
+	/* a) traverse passed in connector list and get encoders for them */
+	count = 0;
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		struct drm_connector_helper_funcs *connector_funcs =
+			connector->helper_private;
+		save_encoders[count++] = connector->encoder;
+		new_encoder = connector->encoder;
+		for (ro = 0; ro < set->num_connectors; ro++) {
+			if (set->connectors[ro] == connector) {
+				new_encoder = connector_funcs->best_encoder(connector);
+				/* if we can't get an encoder for a connector
+				   we are setting now - then fail */
+				if (new_encoder == NULL)
+					/* don't break so fail path works correct */
+					fail = 1;
+				break;
+			}
+		}
+
+		if (new_encoder != connector->encoder) {
+			changed = true;
+			connector->encoder = new_encoder;
+		}
+	}
+
+	if (fail) {
+		ret = -EINVAL;
+		goto fail_no_encoder;
+	}
+
+	count = 0;
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		if (!connector->encoder)
+			continue;
+
+		save_crtcs[count++] = connector->encoder->crtc;
+
+		if (connector->encoder->crtc == set->crtc)
+			new_crtc = NULL;
+		else
+			new_crtc = connector->encoder->crtc;
+
+		for (ro = 0; ro < set->num_connectors; ro++) {
+			if (set->connectors[ro] == connector)
+				new_crtc = set->crtc;
+		}
+		if (new_crtc != connector->encoder->crtc) {
+			changed = true;
+			connector->encoder->crtc = new_crtc;
+		}
+	}
+
+	/* mode_set_base is not a required function */
+	if (flip_or_move && !crtc_funcs->mode_set_base)
+		changed = true;
+
+	if (changed) {
+		set->crtc->fb = set->fb;
+		set->crtc->enabled = (set->mode != NULL);
+		if (set->mode != NULL) {
+			DRM_DEBUG("attempting to set mode from userspace\n");
+			drm_mode_debug_printmodeline(set->mode);
+			if (!drm_crtc_helper_set_mode(set->crtc, set->mode,
+						      set->x, set->y)) {
+				ret = -EINVAL;
+				goto fail_set_mode;
+			}
+			/* TODO are these needed? */
+			set->crtc->desired_x = set->x;
+			set->crtc->desired_y = set->y;
+			set->crtc->desired_mode = set->mode;
+		}
+		drm_helper_disable_unused_functions(dev);
+	} else if (flip_or_move) {
+		if (set->crtc->fb != set->fb)
+			set->crtc->fb = set->fb;
+		crtc_funcs->mode_set_base(set->crtc, set->x, set->y);
+	}
+
+	kfree(save_encoders);
+	kfree(save_crtcs);
+	return 0;
+
+fail_set_mode:
+	set->crtc->enabled = save_enabled;
+	count = 0;
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head)
+		connector->encoder->crtc = save_crtcs[count++];
+fail_no_encoder:
+	kfree(save_crtcs);
+	count = 0;
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		connector->encoder = save_encoders[count++];
+	}
+	kfree(save_encoders);
+	return ret;
+}
+EXPORT_SYMBOL(drm_crtc_helper_set_config);
+
+bool drm_helper_plugged_event(struct drm_device *dev)
+{
+	DRM_DEBUG("\n");
+
+	drm_helper_probe_connector_modes(dev, dev->mode_config.max_width,
+					 dev->mode_config.max_height);
+
+	drm_setup_crtcs(dev);
+
+	/* alert the driver fb layer */
+	dev->mode_config.funcs->fb_changed(dev);
+
+	/* FIXME: send hotplug event */
+	return true;
+}
+/**
+ * drm_initial_config - setup a sane initial connector configuration
+ * @dev: DRM device
+ * @can_grow: this configuration is growable
+ *
+ * LOCKING:
+ * Called at init time, must take mode config lock.
+ *
+ * Scan the CRTCs and connectors and try to put together an initial setup.
+ * At the moment, this is a cloned configuration across all heads with
+ * a new framebuffer object as the backing store.
+ *
+ * RETURNS:
+ * Zero if everything went ok, nonzero otherwise.
+ */
+bool drm_helper_initial_config(struct drm_device *dev, bool can_grow)
+{
+	int ret = false;
+
+	drm_helper_plugged_event(dev);
+	return ret;
+}
+EXPORT_SYMBOL(drm_helper_initial_config);
+
+/**
+ * drm_hotplug_stage_two
+ * @dev DRM device
+ * @connector hotpluged connector
+ *
+ * LOCKING.
+ * Caller must hold mode config lock, function might grab struct lock.
+ *
+ * Stage two of a hotplug.
+ *
+ * RETURNS:
+ * Zero on success, errno on failure.
+ */
+int drm_helper_hotplug_stage_two(struct drm_device *dev)
+{
+	dev->mode_config.hotplug_counter++;
+
+	drm_helper_plugged_event(dev);
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_helper_hotplug_stage_two);
+
+int drm_helper_mode_fill_fb_struct(struct drm_framebuffer *fb,
+				   struct drm_mode_fb_cmd *mode_cmd)
+{
+	fb->width = mode_cmd->width;
+	fb->height = mode_cmd->height;
+	fb->pitch = mode_cmd->pitch;
+	fb->bits_per_pixel = mode_cmd->bpp;
+	fb->depth = mode_cmd->depth;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_helper_mode_fill_fb_struct);
+
+int drm_helper_resume_force_mode(struct drm_device *dev)
+{
+	struct drm_crtc *crtc;
+	int ret;
+
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+
+		if (!crtc->enabled)
+			continue;
+
+		ret = drm_crtc_helper_set_mode(crtc, &crtc->mode, crtc->x,
+					       crtc->y);
+
+		if (ret == false)
+			DRM_ERROR("failed to set mode on crtc %p\n", crtc);
+	}
+	return 0;
+}
+EXPORT_SYMBOL(drm_helper_resume_force_mode);
diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
index 98a7813..0b9f316 100644
--- a/drivers/gpu/drm/drm_drv.c
+++ b/drivers/gpu/drm/drm_drv.c
@@ -126,6 +126,26 @@
 	DRM_IOCTL_DEF(DRM_IOCTL_GEM_CLOSE, drm_gem_close_ioctl, 0),
 	DRM_IOCTL_DEF(DRM_IOCTL_GEM_FLINK, drm_gem_flink_ioctl, DRM_AUTH),
 	DRM_IOCTL_DEF(DRM_IOCTL_GEM_OPEN, drm_gem_open_ioctl, DRM_AUTH),
+
+	DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETRESOURCES, drm_mode_getresources, DRM_MASTER|DRM_CONTROL_ALLOW),
+	DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETCRTC, drm_mode_getcrtc, DRM_MASTER|DRM_CONTROL_ALLOW),
+	DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETCONNECTOR, drm_mode_getconnector, DRM_MASTER|DRM_CONTROL_ALLOW),
+	DRM_IOCTL_DEF(DRM_IOCTL_MODE_SETCRTC, drm_mode_setcrtc, DRM_MASTER|DRM_CONTROL_ALLOW),
+	DRM_IOCTL_DEF(DRM_IOCTL_MODE_CURSOR, drm_mode_cursor_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW),
+	DRM_IOCTL_DEF(DRM_IOCTL_MODE_ADDFB, drm_mode_addfb, DRM_MASTER|DRM_CONTROL_ALLOW),
+	DRM_IOCTL_DEF(DRM_IOCTL_MODE_RMFB, drm_mode_rmfb, DRM_MASTER|DRM_CONTROL_ALLOW),
+	DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETFB, drm_mode_getfb, DRM_MASTER|DRM_CONTROL_ALLOW),
+
+	DRM_IOCTL_DEF(DRM_IOCTL_MODE_SETPROPERTY, drm_mode_connector_property_set_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW),
+	DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETPROPBLOB, drm_mode_getblob_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW),
+	DRM_IOCTL_DEF(DRM_IOCTL_MODE_ATTACHMODE, drm_mode_attachmode_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW),
+	DRM_IOCTL_DEF(DRM_IOCTL_MODE_DETACHMODE, drm_mode_detachmode_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW),
+	DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETPROPERTY, drm_mode_getproperty_ioctl, DRM_MASTER | DRM_CONTROL_ALLOW),
+
+	DRM_IOCTL_DEF(DRM_IOCTL_MODE_REPLACEFB, drm_mode_replacefb, DRM_MASTER|DRM_ROOT_ONLY|DRM_CONTROL_ALLOW),
+	DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETENCODER, drm_mode_getencoder, DRM_MASTER|DRM_CONTROL_ALLOW),
+	DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETGAMMA, drm_mode_gamma_get_ioctl, DRM_MASTER),
+	DRM_IOCTL_DEF(DRM_IOCTL_MODE_SETGAMMA, drm_mode_gamma_set_ioctl, DRM_MASTER),
 };
 
 #define DRM_CORE_IOCTL_COUNT	ARRAY_SIZE( drm_ioctls )
@@ -150,7 +170,7 @@
 		dev->driver->lastclose(dev);
 	DRM_DEBUG("driver lastclose completed\n");
 
-	if (dev->irq_enabled)
+	if (dev->irq_enabled && !drm_core_check_feature(dev, DRIVER_MODESET))
 		drm_irq_uninstall(dev);
 
 	mutex_lock(&dev->struct_mutex);
@@ -160,7 +180,8 @@
 	del_timer(&dev->timer);
 
 	/* Clear AGP information */
-	if (drm_core_has_AGP(dev) && dev->agp) {
+	if (drm_core_has_AGP(dev) && dev->agp &&
+	    !drm_core_check_feature(dev, DRIVER_MODESET)) {
 		struct drm_agp_mem *entry, *tempe;
 
 		/* Remove AGP resources, but leave dev->agp
@@ -179,7 +200,8 @@
 		dev->agp->acquired = 0;
 		dev->agp->enabled = 0;
 	}
-	if (drm_core_check_feature(dev, DRIVER_SG) && dev->sg) {
+	if (drm_core_check_feature(dev, DRIVER_SG) && dev->sg &&
+	    !drm_core_check_feature(dev, DRIVER_MODESET)) {
 		drm_sg_cleanup(dev->sg);
 		dev->sg = NULL;
 	}
@@ -206,7 +228,8 @@
 	}
 	dev->queue_count = 0;
 
-	if (drm_core_check_feature(dev, DRIVER_HAVE_DMA))
+	if (drm_core_check_feature(dev, DRIVER_HAVE_DMA) &&
+	    !drm_core_check_feature(dev, DRIVER_MODESET))
 		drm_dma_takedown(dev);
 
 	dev->dev_mapping = NULL;
@@ -307,6 +330,9 @@
 	drm_ht_remove(&dev->map_hash);
 	drm_ctxbitmap_cleanup(dev);
 
+	if (drm_core_check_feature(dev, DRIVER_MODESET))
+		drm_put_minor(&dev->control);
+
 	if (driver->driver_features & DRIVER_GEM)
 		drm_gem_destroy(dev);
 
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
new file mode 100644
index 0000000..681753e
--- /dev/null
+++ b/drivers/gpu/drm/drm_edid.c
@@ -0,0 +1,732 @@
+/*
+ * Copyright (c) 2006 Luc Verhaegen (quirks list)
+ * Copyright (c) 2007-2008 Intel Corporation
+ *   Jesse Barnes <jesse.barnes@intel.com>
+ *
+ * DDC probing routines (drm_ddc_read & drm_do_probe_ddc_edid) originally from
+ * FB layer.
+ *   Copyright (C) 2006 Dennis Munsie <dmunsie@cecropia.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sub license,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include "drmP.h"
+#include "drm_edid.h"
+
+/*
+ * TODO:
+ *   - support EDID 1.4 (incl. CE blocks)
+ */
+
+/*
+ * EDID blocks out in the wild have a variety of bugs, try to collect
+ * them here (note that userspace may work around broken monitors first,
+ * but fixes should make their way here so that the kernel "just works"
+ * on as many displays as possible).
+ */
+
+/* First detailed mode wrong, use largest 60Hz mode */
+#define EDID_QUIRK_PREFER_LARGE_60		(1 << 0)
+/* Reported 135MHz pixel clock is too high, needs adjustment */
+#define EDID_QUIRK_135_CLOCK_TOO_HIGH		(1 << 1)
+/* Prefer the largest mode at 75 Hz */
+#define EDID_QUIRK_PREFER_LARGE_75		(1 << 2)
+/* Detail timing is in cm not mm */
+#define EDID_QUIRK_DETAILED_IN_CM		(1 << 3)
+/* Detailed timing descriptors have bogus size values, so just take the
+ * maximum size and use that.
+ */
+#define EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE	(1 << 4)
+/* Monitor forgot to set the first detailed is preferred bit. */
+#define EDID_QUIRK_FIRST_DETAILED_PREFERRED	(1 << 5)
+/* use +hsync +vsync for detailed mode */
+#define EDID_QUIRK_DETAILED_SYNC_PP		(1 << 6)
+
+static struct edid_quirk {
+	char *vendor;
+	int product_id;
+	u32 quirks;
+} edid_quirk_list[] = {
+	/* Acer AL1706 */
+	{ "ACR", 44358, EDID_QUIRK_PREFER_LARGE_60 },
+	/* Acer F51 */
+	{ "API", 0x7602, EDID_QUIRK_PREFER_LARGE_60 },
+	/* Unknown Acer */
+	{ "ACR", 2423, EDID_QUIRK_FIRST_DETAILED_PREFERRED },
+
+	/* Belinea 10 15 55 */
+	{ "MAX", 1516, EDID_QUIRK_PREFER_LARGE_60 },
+	{ "MAX", 0x77e, EDID_QUIRK_PREFER_LARGE_60 },
+
+	/* Envision Peripherals, Inc. EN-7100e */
+	{ "EPI", 59264, EDID_QUIRK_135_CLOCK_TOO_HIGH },
+
+	/* Funai Electronics PM36B */
+	{ "FCM", 13600, EDID_QUIRK_PREFER_LARGE_75 |
+	  EDID_QUIRK_DETAILED_IN_CM },
+
+	/* LG Philips LCD LP154W01-A5 */
+	{ "LPL", 0, EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE },
+	{ "LPL", 0x2a00, EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE },
+
+	/* Philips 107p5 CRT */
+	{ "PHL", 57364, EDID_QUIRK_FIRST_DETAILED_PREFERRED },
+
+	/* Proview AY765C */
+	{ "PTS", 765, EDID_QUIRK_FIRST_DETAILED_PREFERRED },
+
+	/* Samsung SyncMaster 205BW.  Note: irony */
+	{ "SAM", 541, EDID_QUIRK_DETAILED_SYNC_PP },
+	/* Samsung SyncMaster 22[5-6]BW */
+	{ "SAM", 596, EDID_QUIRK_PREFER_LARGE_60 },
+	{ "SAM", 638, EDID_QUIRK_PREFER_LARGE_60 },
+};
+
+
+/* Valid EDID header has these bytes */
+static u8 edid_header[] = { 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00 };
+
+/**
+ * edid_is_valid - sanity check EDID data
+ * @edid: EDID data
+ *
+ * Sanity check the EDID block by looking at the header, the version number
+ * and the checksum.  Return 0 if the EDID doesn't check out, or 1 if it's
+ * valid.
+ */
+static bool edid_is_valid(struct edid *edid)
+{
+	int i;
+	u8 csum = 0;
+	u8 *raw_edid = (u8 *)edid;
+
+	if (memcmp(edid->header, edid_header, sizeof(edid_header)))
+		goto bad;
+	if (edid->version != 1) {
+		DRM_ERROR("EDID has major version %d, instead of 1\n", edid->version);
+		goto bad;
+	}
+	if (edid->revision <= 0 || edid->revision > 3) {
+		DRM_ERROR("EDID has minor version %d, which is not between 0-3\n", edid->revision);
+		goto bad;
+	}
+
+	for (i = 0; i < EDID_LENGTH; i++)
+		csum += raw_edid[i];
+	if (csum) {
+		DRM_ERROR("EDID checksum is invalid, remainder is %d\n", csum);
+		goto bad;
+	}
+
+	return 1;
+
+bad:
+	if (raw_edid) {
+		DRM_ERROR("Raw EDID:\n");
+		print_hex_dump_bytes(KERN_ERR, DUMP_PREFIX_NONE, raw_edid, EDID_LENGTH);
+		printk("\n");
+	}
+	return 0;
+}
+
+/**
+ * edid_vendor - match a string against EDID's obfuscated vendor field
+ * @edid: EDID to match
+ * @vendor: vendor string
+ *
+ * Returns true if @vendor is in @edid, false otherwise
+ */
+static bool edid_vendor(struct edid *edid, char *vendor)
+{
+	char edid_vendor[3];
+
+	edid_vendor[0] = ((edid->mfg_id[0] & 0x7c) >> 2) + '@';
+	edid_vendor[1] = (((edid->mfg_id[0] & 0x3) << 3) |
+			  ((edid->mfg_id[1] & 0xe0) >> 5)) + '@';
+	edid_vendor[2] = (edid->mfg_id[2] & 0x1f) + '@';
+
+	return !strncmp(edid_vendor, vendor, 3);
+}
+
+/**
+ * edid_get_quirks - return quirk flags for a given EDID
+ * @edid: EDID to process
+ *
+ * This tells subsequent routines what fixes they need to apply.
+ */
+static u32 edid_get_quirks(struct edid *edid)
+{
+	struct edid_quirk *quirk;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(edid_quirk_list); i++) {
+		quirk = &edid_quirk_list[i];
+
+		if (edid_vendor(edid, quirk->vendor) &&
+		    (EDID_PRODUCT_ID(edid) == quirk->product_id))
+			return quirk->quirks;
+	}
+
+	return 0;
+}
+
+#define MODE_SIZE(m) ((m)->hdisplay * (m)->vdisplay)
+#define MODE_REFRESH_DIFF(m,r) (abs((m)->vrefresh - target_refresh))
+
+
+/**
+ * edid_fixup_preferred - set preferred modes based on quirk list
+ * @connector: has mode list to fix up
+ * @quirks: quirks list
+ *
+ * Walk the mode list for @connector, clearing the preferred status
+ * on existing modes and setting it anew for the right mode ala @quirks.
+ */
+static void edid_fixup_preferred(struct drm_connector *connector,
+				 u32 quirks)
+{
+	struct drm_display_mode *t, *cur_mode, *preferred_mode;
+	int target_refresh;
+
+	if (list_empty(&connector->probed_modes))
+		return;
+
+	if (quirks & EDID_QUIRK_PREFER_LARGE_60)
+		target_refresh = 60;
+	if (quirks & EDID_QUIRK_PREFER_LARGE_75)
+		target_refresh = 75;
+
+	preferred_mode = list_first_entry(&connector->probed_modes,
+					  struct drm_display_mode, head);
+
+	list_for_each_entry_safe(cur_mode, t, &connector->probed_modes, head) {
+		cur_mode->type &= ~DRM_MODE_TYPE_PREFERRED;
+
+		if (cur_mode == preferred_mode)
+			continue;
+
+		/* Largest mode is preferred */
+		if (MODE_SIZE(cur_mode) > MODE_SIZE(preferred_mode))
+			preferred_mode = cur_mode;
+
+		/* At a given size, try to get closest to target refresh */
+		if ((MODE_SIZE(cur_mode) == MODE_SIZE(preferred_mode)) &&
+		    MODE_REFRESH_DIFF(cur_mode, target_refresh) <
+		    MODE_REFRESH_DIFF(preferred_mode, target_refresh)) {
+			preferred_mode = cur_mode;
+		}
+	}
+
+	preferred_mode->type |= DRM_MODE_TYPE_PREFERRED;
+}
+
+/**
+ * drm_mode_std - convert standard mode info (width, height, refresh) into mode
+ * @t: standard timing params
+ *
+ * Take the standard timing params (in this case width, aspect, and refresh)
+ * and convert them into a real mode using CVT.
+ *
+ * Punts for now, but should eventually use the FB layer's CVT based mode
+ * generation code.
+ */
+struct drm_display_mode *drm_mode_std(struct drm_device *dev,
+				      struct std_timing *t)
+{
+	struct drm_display_mode *mode;
+	int hsize = t->hsize * 8 + 248, vsize;
+
+	mode = drm_mode_create(dev);
+	if (!mode)
+		return NULL;
+
+	if (t->aspect_ratio == 0)
+		vsize = (hsize * 10) / 16;
+	else if (t->aspect_ratio == 1)
+		vsize = (hsize * 3) / 4;
+	else if (t->aspect_ratio == 2)
+		vsize = (hsize * 4) / 5;
+	else
+		vsize = (hsize * 9) / 16;
+
+	drm_mode_set_name(mode);
+
+	return mode;
+}
+
+/**
+ * drm_mode_detailed - create a new mode from an EDID detailed timing section
+ * @dev: DRM device (needed to create new mode)
+ * @edid: EDID block
+ * @timing: EDID detailed timing info
+ * @quirks: quirks to apply
+ *
+ * An EDID detailed timing block contains enough info for us to create and
+ * return a new struct drm_display_mode.
+ */
+static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev,
+						  struct edid *edid,
+						  struct detailed_timing *timing,
+						  u32 quirks)
+{
+	struct drm_display_mode *mode;
+	struct detailed_pixel_timing *pt = &timing->data.pixel_data;
+
+	if (pt->stereo) {
+		printk(KERN_WARNING "stereo mode not supported\n");
+		return NULL;
+	}
+	if (!pt->separate_sync) {
+		printk(KERN_WARNING "integrated sync not supported\n");
+		return NULL;
+	}
+
+	mode = drm_mode_create(dev);
+	if (!mode)
+		return NULL;
+
+	mode->type = DRM_MODE_TYPE_DRIVER;
+
+	if (quirks & EDID_QUIRK_135_CLOCK_TOO_HIGH)
+		timing->pixel_clock = 1088;
+
+	mode->clock = timing->pixel_clock * 10;
+
+	mode->hdisplay = (pt->hactive_hi << 8) | pt->hactive_lo;
+	mode->hsync_start = mode->hdisplay + ((pt->hsync_offset_hi << 8) |
+					      pt->hsync_offset_lo);
+	mode->hsync_end = mode->hsync_start +
+		((pt->hsync_pulse_width_hi << 8) |
+		 pt->hsync_pulse_width_lo);
+	mode->htotal = mode->hdisplay + ((pt->hblank_hi << 8) | pt->hblank_lo);
+
+	mode->vdisplay = (pt->vactive_hi << 8) | pt->vactive_lo;
+	mode->vsync_start = mode->vdisplay + ((pt->vsync_offset_hi << 8) |
+					      pt->vsync_offset_lo);
+	mode->vsync_end = mode->vsync_start +
+		((pt->vsync_pulse_width_hi << 8) |
+		 pt->vsync_pulse_width_lo);
+	mode->vtotal = mode->vdisplay + ((pt->vblank_hi << 8) | pt->vblank_lo);
+
+	drm_mode_set_name(mode);
+
+	if (pt->interlaced)
+		mode->flags |= DRM_MODE_FLAG_INTERLACE;
+
+	if (quirks & EDID_QUIRK_DETAILED_SYNC_PP) {
+		pt->hsync_positive = 1;
+		pt->vsync_positive = 1;
+	}
+
+	mode->flags |= pt->hsync_positive ? DRM_MODE_FLAG_PHSYNC : DRM_MODE_FLAG_NHSYNC;
+	mode->flags |= pt->vsync_positive ? DRM_MODE_FLAG_PVSYNC : DRM_MODE_FLAG_NVSYNC;
+
+	mode->width_mm = pt->width_mm_lo | (pt->width_mm_hi << 8);
+	mode->height_mm = pt->height_mm_lo | (pt->height_mm_hi << 8);
+
+	if (quirks & EDID_QUIRK_DETAILED_IN_CM) {
+		mode->width_mm *= 10;
+		mode->height_mm *= 10;
+	}
+
+	if (quirks & EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE) {
+		mode->width_mm = edid->width_cm * 10;
+		mode->height_mm = edid->height_cm * 10;
+	}
+
+	return mode;
+}
+
+/*
+ * Detailed mode info for the EDID "established modes" data to use.
+ */
+static struct drm_display_mode edid_est_modes[] = {
+	{ DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 40000, 800, 840,
+		   968, 1056, 0, 600, 601, 605, 628, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 800x600@60Hz */
+	{ DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 36000, 800, 824,
+		   896, 1024, 0, 600, 601, 603,  625, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 800x600@56Hz */
+	{ DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 31500, 640, 656,
+		   720, 840, 0, 480, 481, 484, 500, 0,
+		   DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 640x480@75Hz */
+	{ DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 31500, 640, 664,
+		   704,  832, 0, 480, 489, 491, 520, 0,
+		   DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 640x480@72Hz */
+	{ DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 30240, 640, 704,
+		   768,  864, 0, 480, 483, 486, 525, 0,
+		   DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 640x480@67Hz */
+	{ DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 25200, 640, 656,
+		   752, 800, 0, 480, 490, 492, 525, 0,
+		   DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 640x480@60Hz */
+	{ DRM_MODE("720x400", DRM_MODE_TYPE_DRIVER, 35500, 720, 738,
+		   846, 900, 0, 400, 421, 423,  449, 0,
+		   DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 720x400@88Hz */
+	{ DRM_MODE("720x400", DRM_MODE_TYPE_DRIVER, 28320, 720, 738,
+		   846,  900, 0, 400, 412, 414, 449, 0,
+		   DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 720x400@70Hz */
+	{ DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 135000, 1280, 1296,
+		   1440, 1688, 0, 1024, 1025, 1028, 1066, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 1280x1024@75Hz */
+	{ DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 78800, 1024, 1040,
+		   1136, 1312, 0,  768, 769, 772, 800, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 1024x768@75Hz */
+	{ DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 75000, 1024, 1048,
+		   1184, 1328, 0,  768, 771, 777, 806, 0,
+		   DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 1024x768@70Hz */
+	{ DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 65000, 1024, 1048,
+		   1184, 1344, 0,  768, 771, 777, 806, 0,
+		   DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 1024x768@60Hz */
+	{ DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER,44900, 1024, 1032,
+		   1208, 1264, 0, 768, 768, 776, 817, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_INTERLACE) }, /* 1024x768@43Hz */
+	{ DRM_MODE("832x624", DRM_MODE_TYPE_DRIVER, 57284, 832, 864,
+		   928, 1152, 0, 624, 625, 628, 667, 0,
+		   DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 832x624@75Hz */
+	{ DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 49500, 800, 816,
+		   896, 1056, 0, 600, 601, 604,  625, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 800x600@75Hz */
+	{ DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 50000, 800, 856,
+		   976, 1040, 0, 600, 637, 643, 666, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 800x600@72Hz */
+	{ DRM_MODE("1152x864", DRM_MODE_TYPE_DRIVER, 108000, 1152, 1216,
+		   1344, 1600, 0,  864, 865, 868, 900, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 1152x864@75Hz */
+};
+
+#define EDID_EST_TIMINGS 16
+#define EDID_STD_TIMINGS 8
+#define EDID_DETAILED_TIMINGS 4
+
+/**
+ * add_established_modes - get est. modes from EDID and add them
+ * @edid: EDID block to scan
+ *
+ * Each EDID block contains a bitmap of the supported "established modes" list
+ * (defined above).  Tease them out and add them to the global modes list.
+ */
+static int add_established_modes(struct drm_connector *connector, struct edid *edid)
+{
+	struct drm_device *dev = connector->dev;
+	unsigned long est_bits = edid->established_timings.t1 |
+		(edid->established_timings.t2 << 8) |
+		((edid->established_timings.mfg_rsvd & 0x80) << 9);
+	int i, modes = 0;
+
+	for (i = 0; i <= EDID_EST_TIMINGS; i++)
+		if (est_bits & (1<<i)) {
+			struct drm_display_mode *newmode;
+			newmode = drm_mode_duplicate(dev, &edid_est_modes[i]);
+			if (newmode) {
+				drm_mode_probed_add(connector, newmode);
+				modes++;
+			}
+		}
+
+	return modes;
+}
+
+/**
+ * add_standard_modes - get std. modes from EDID and add them
+ * @edid: EDID block to scan
+ *
+ * Standard modes can be calculated using the CVT standard.  Grab them from
+ * @edid, calculate them, and add them to the list.
+ */
+static int add_standard_modes(struct drm_connector *connector, struct edid *edid)
+{
+	struct drm_device *dev = connector->dev;
+	int i, modes = 0;
+
+	for (i = 0; i < EDID_STD_TIMINGS; i++) {
+		struct std_timing *t = &edid->standard_timings[i];
+		struct drm_display_mode *newmode;
+
+		/* If std timings bytes are 1, 1 it's empty */
+		if (t->hsize == 1 && (t->aspect_ratio | t->vfreq) == 1)
+			continue;
+
+		newmode = drm_mode_std(dev, &edid->standard_timings[i]);
+		if (newmode) {
+			drm_mode_probed_add(connector, newmode);
+			modes++;
+		}
+	}
+
+	return modes;
+}
+
+/**
+ * add_detailed_modes - get detailed mode info from EDID data
+ * @connector: attached connector
+ * @edid: EDID block to scan
+ * @quirks: quirks to apply
+ *
+ * Some of the detailed timing sections may contain mode information.  Grab
+ * it and add it to the list.
+ */
+static int add_detailed_info(struct drm_connector *connector,
+			     struct edid *edid, u32 quirks)
+{
+	struct drm_device *dev = connector->dev;
+	int i, j, modes = 0;
+
+	for (i = 0; i < EDID_DETAILED_TIMINGS; i++) {
+		struct detailed_timing *timing = &edid->detailed_timings[i];
+		struct detailed_non_pixel *data = &timing->data.other_data;
+		struct drm_display_mode *newmode;
+
+		/* EDID up to and including 1.2 may put monitor info here */
+		if (edid->version == 1 && edid->revision < 3)
+			continue;
+
+		/* Detailed mode timing */
+		if (timing->pixel_clock) {
+			newmode = drm_mode_detailed(dev, edid, timing, quirks);
+			if (!newmode)
+				continue;
+
+			/* First detailed mode is preferred */
+			if (i == 0 && edid->preferred_timing)
+				newmode->type |= DRM_MODE_TYPE_PREFERRED;
+			drm_mode_probed_add(connector, newmode);
+
+			modes++;
+			continue;
+		}
+
+		/* Other timing or info */
+		switch (data->type) {
+		case EDID_DETAIL_MONITOR_SERIAL:
+			break;
+		case EDID_DETAIL_MONITOR_STRING:
+			break;
+		case EDID_DETAIL_MONITOR_RANGE:
+			/* Get monitor range data */
+			break;
+		case EDID_DETAIL_MONITOR_NAME:
+			break;
+		case EDID_DETAIL_MONITOR_CPDATA:
+			break;
+		case EDID_DETAIL_STD_MODES:
+			/* Five modes per detailed section */
+			for (j = 0; j < 5; i++) {
+				struct std_timing *std;
+				struct drm_display_mode *newmode;
+
+				std = &data->data.timings[j];
+				newmode = drm_mode_std(dev, std);
+				if (newmode) {
+					drm_mode_probed_add(connector, newmode);
+					modes++;
+				}
+			}
+			break;
+		default:
+			break;
+		}
+	}
+
+	return modes;
+}
+
+#define DDC_ADDR 0x50
+
+unsigned char *drm_do_probe_ddc_edid(struct i2c_adapter *adapter)
+{
+	unsigned char start = 0x0;
+	unsigned char *buf = kmalloc(EDID_LENGTH, GFP_KERNEL);
+	struct i2c_msg msgs[] = {
+		{
+			.addr	= DDC_ADDR,
+			.flags	= 0,
+			.len	= 1,
+			.buf	= &start,
+		}, {
+			.addr	= DDC_ADDR,
+			.flags	= I2C_M_RD,
+			.len	= EDID_LENGTH,
+			.buf	= buf,
+		}
+	};
+
+	if (!buf) {
+		dev_warn(&adapter->dev, "unable to allocate memory for EDID "
+			 "block.\n");
+		return NULL;
+	}
+
+	if (i2c_transfer(adapter, msgs, 2) == 2)
+		return buf;
+
+	dev_info(&adapter->dev, "unable to read EDID block.\n");
+	kfree(buf);
+	return NULL;
+}
+EXPORT_SYMBOL(drm_do_probe_ddc_edid);
+
+static unsigned char *drm_ddc_read(struct i2c_adapter *adapter)
+{
+	struct i2c_algo_bit_data *algo_data = adapter->algo_data;
+	unsigned char *edid = NULL;
+	int i, j;
+
+	algo_data->setscl(algo_data->data, 1);
+
+	for (i = 0; i < 1; i++) {
+		/* For some old monitors we need the
+		 * following process to initialize/stop DDC
+		 */
+		algo_data->setsda(algo_data->data, 1);
+		msleep(13);
+
+		algo_data->setscl(algo_data->data, 1);
+		for (j = 0; j < 5; j++) {
+			msleep(10);
+			if (algo_data->getscl(algo_data->data))
+				break;
+		}
+		if (j == 5)
+			continue;
+
+		algo_data->setsda(algo_data->data, 0);
+		msleep(15);
+		algo_data->setscl(algo_data->data, 0);
+		msleep(15);
+		algo_data->setsda(algo_data->data, 1);
+		msleep(15);
+
+		/* Do the real work */
+		edid = drm_do_probe_ddc_edid(adapter);
+		algo_data->setsda(algo_data->data, 0);
+		algo_data->setscl(algo_data->data, 0);
+		msleep(15);
+
+		algo_data->setscl(algo_data->data, 1);
+		for (j = 0; j < 10; j++) {
+			msleep(10);
+			if (algo_data->getscl(algo_data->data))
+				break;
+		}
+
+		algo_data->setsda(algo_data->data, 1);
+		msleep(15);
+		algo_data->setscl(algo_data->data, 0);
+		algo_data->setsda(algo_data->data, 0);
+		if (edid)
+			break;
+	}
+	/* Release the DDC lines when done or the Apple Cinema HD display
+	 * will switch off
+	 */
+	algo_data->setsda(algo_data->data, 1);
+	algo_data->setscl(algo_data->data, 1);
+
+	return edid;
+}
+
+/**
+ * drm_get_edid - get EDID data, if available
+ * @connector: connector we're probing
+ * @adapter: i2c adapter to use for DDC
+ *
+ * Poke the given connector's i2c channel to grab EDID data if possible.
+ *
+ * Return edid data or NULL if we couldn't find any.
+ */
+struct edid *drm_get_edid(struct drm_connector *connector,
+			  struct i2c_adapter *adapter)
+{
+	struct edid *edid;
+
+	edid = (struct edid *)drm_ddc_read(adapter);
+	if (!edid) {
+		dev_warn(&connector->dev->pdev->dev, "%s: no EDID data\n",
+			 drm_get_connector_name(connector));
+		return NULL;
+	}
+	if (!edid_is_valid(edid)) {
+		dev_warn(&connector->dev->pdev->dev, "%s: EDID invalid.\n",
+			 drm_get_connector_name(connector));
+		kfree(edid);
+		return NULL;
+	}
+
+	connector->display_info.raw_edid = (char *)edid;
+
+	return edid;
+}
+EXPORT_SYMBOL(drm_get_edid);
+
+/**
+ * drm_add_edid_modes - add modes from EDID data, if available
+ * @connector: connector we're probing
+ * @edid: edid data
+ *
+ * Add the specified modes to the connector's mode list.
+ *
+ * Return number of modes added or 0 if we couldn't find any.
+ */
+int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid)
+{
+	int num_modes = 0;
+	u32 quirks;
+
+	if (edid == NULL) {
+		return 0;
+	}
+	if (!edid_is_valid(edid)) {
+		dev_warn(&connector->dev->pdev->dev, "%s: EDID invalid.\n",
+			 drm_get_connector_name(connector));
+		return 0;
+	}
+
+	quirks = edid_get_quirks(edid);
+
+	num_modes += add_established_modes(connector, edid);
+	num_modes += add_standard_modes(connector, edid);
+	num_modes += add_detailed_info(connector, edid, quirks);
+
+	if (quirks & (EDID_QUIRK_PREFER_LARGE_60 | EDID_QUIRK_PREFER_LARGE_75))
+		edid_fixup_preferred(connector, quirks);
+
+	connector->display_info.serration_vsync = edid->serration_vsync;
+	connector->display_info.sync_on_green = edid->sync_on_green;
+	connector->display_info.composite_sync = edid->composite_sync;
+	connector->display_info.separate_syncs = edid->separate_syncs;
+	connector->display_info.blank_to_black = edid->blank_to_black;
+	connector->display_info.video_level = edid->video_level;
+	connector->display_info.digital = edid->digital;
+	connector->display_info.width_mm = edid->width_cm * 10;
+	connector->display_info.height_mm = edid->height_cm * 10;
+	connector->display_info.gamma = edid->gamma;
+	connector->display_info.gtf_supported = edid->default_gtf;
+	connector->display_info.standard_color = edid->standard_color;
+	connector->display_info.display_type = edid->display_type;
+	connector->display_info.active_off_supported = edid->pm_active_off;
+	connector->display_info.suspend_supported = edid->pm_suspend;
+	connector->display_info.standby_supported = edid->pm_standby;
+	connector->display_info.gamma = edid->gamma;
+
+	return num_modes;
+}
+EXPORT_SYMBOL(drm_add_edid_modes);
diff --git a/drivers/gpu/drm/drm_fops.c b/drivers/gpu/drm/drm_fops.c
index 3a6c439..3733e36 100644
--- a/drivers/gpu/drm/drm_fops.c
+++ b/drivers/gpu/drm/drm_fops.c
@@ -35,7 +35,6 @@
  */
 
 #include "drmP.h"
-#include "drm_sarea.h"
 #include <linux/poll.h>
 #include <linux/smp_lock.h>
 
@@ -55,10 +54,12 @@
 
 	atomic_set(&dev->ioctl_count, 0);
 	atomic_set(&dev->vma_count, 0);
-	dev->buf_use = 0;
-	atomic_set(&dev->buf_alloc, 0);
 
-	if (drm_core_check_feature(dev, DRIVER_HAVE_DMA)) {
+	if (drm_core_check_feature(dev, DRIVER_HAVE_DMA) &&
+	    !drm_core_check_feature(dev, DRIVER_MODESET)) {
+		dev->buf_use = 0;
+		atomic_set(&dev->buf_alloc, 0);
+
 		i = drm_dma_setup(dev);
 		if (i < 0)
 			return i;
@@ -138,14 +139,14 @@
 		}
 		spin_unlock(&dev->count_lock);
 	}
-
 out:
 	mutex_lock(&dev->struct_mutex);
-	if (dev->dev_mapping == NULL)
-		dev->dev_mapping = inode->i_mapping;
-	else if (dev->dev_mapping != inode->i_mapping)
-		WARN(1, "dev->dev_mapping not inode mapping (%p expected %p)\n",
-		     dev->dev_mapping, inode->i_mapping);
+	if (minor->type == DRM_MINOR_LEGACY) {
+		BUG_ON((dev->dev_mapping != NULL) &&
+			(dev->dev_mapping != inode->i_mapping));
+		if (dev->dev_mapping == NULL)
+			dev->dev_mapping = inode->i_mapping;
+	}
 	mutex_unlock(&dev->struct_mutex);
 
 	return retcode;
@@ -251,6 +252,7 @@
 	priv->lock_count = 0;
 
 	INIT_LIST_HEAD(&priv->lhead);
+	INIT_LIST_HEAD(&priv->fbs);
 
 	if (dev->driver->driver_features & DRIVER_GEM)
 		drm_gem_open(dev, priv);
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index 1e787f8..1608f8d 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -305,6 +305,8 @@
 	case DRM_INST_HANDLER:
 		if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ))
 			return 0;
+		if (drm_core_check_feature(dev, DRIVER_MODESET))
+			return 0;
 		if (dev->if_version < DRM_IF_VERSION(1, 2) &&
 		    ctl->irq != dev->pdev->irq)
 			return -EINVAL;
@@ -312,6 +314,8 @@
 	case DRM_UNINST_HANDLER:
 		if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ))
 			return 0;
+		if (drm_core_check_feature(dev, DRIVER_MODESET))
+			return 0;
 		return drm_irq_uninstall(dev);
 	default:
 		return -EINVAL;
@@ -427,6 +431,45 @@
 EXPORT_SYMBOL(drm_vblank_put);
 
 /**
+ * drm_vblank_pre_modeset - account for vblanks across mode sets
+ * @dev: DRM device
+ * @crtc: CRTC in question
+ * @post: post or pre mode set?
+ *
+ * Account for vblank events across mode setting events, which will likely
+ * reset the hardware frame counter.
+ */
+void drm_vblank_pre_modeset(struct drm_device *dev, int crtc)
+{
+	/*
+	 * To avoid all the problems that might happen if interrupts
+	 * were enabled/disabled around or between these calls, we just
+	 * have the kernel take a reference on the CRTC (just once though
+	 * to avoid corrupting the count if multiple, mismatch calls occur),
+	 * so that interrupts remain enabled in the interim.
+	 */
+	if (!dev->vblank_inmodeset[crtc]) {
+		dev->vblank_inmodeset[crtc] = 1;
+		drm_vblank_get(dev, crtc);
+	}
+}
+EXPORT_SYMBOL(drm_vblank_pre_modeset);
+
+void drm_vblank_post_modeset(struct drm_device *dev, int crtc)
+{
+	unsigned long irqflags;
+
+	if (dev->vblank_inmodeset[crtc]) {
+		spin_lock_irqsave(&dev->vbl_lock, irqflags);
+		dev->vblank_disable_allowed = 1;
+		dev->vblank_inmodeset[crtc] = 0;
+		spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
+		drm_vblank_put(dev, crtc);
+	}
+}
+EXPORT_SYMBOL(drm_vblank_post_modeset);
+
+/**
  * drm_modeset_ctl - handle vblank event counter changes across mode switch
  * @DRM_IOCTL_ARGS: standard ioctl arguments
  *
@@ -441,7 +484,6 @@
 		    struct drm_file *file_priv)
 {
 	struct drm_modeset_ctl *modeset = data;
-	unsigned long irqflags;
 	int crtc, ret = 0;
 
 	/* If drm_vblank_init() hasn't been called yet, just no-op */
@@ -454,28 +496,12 @@
 		goto out;
 	}
 
-	/*
-	 * To avoid all the problems that might happen if interrupts
-	 * were enabled/disabled around or between these calls, we just
-	 * have the kernel take a reference on the CRTC (just once though
-	 * to avoid corrupting the count if multiple, mismatch calls occur),
-	 * so that interrupts remain enabled in the interim.
-	 */
 	switch (modeset->cmd) {
 	case _DRM_PRE_MODESET:
-		if (!dev->vblank_inmodeset[crtc]) {
-			dev->vblank_inmodeset[crtc] = 1;
-			drm_vblank_get(dev, crtc);
-		}
+		drm_vblank_pre_modeset(dev, crtc);
 		break;
 	case _DRM_POST_MODESET:
-		if (dev->vblank_inmodeset[crtc]) {
-			spin_lock_irqsave(&dev->vbl_lock, irqflags);
-			dev->vblank_disable_allowed = 1;
-			dev->vblank_inmodeset[crtc] = 0;
-			spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
-			drm_vblank_put(dev, crtc);
-		}
+		drm_vblank_post_modeset(dev, crtc);
 		break;
 	default:
 		ret = -EINVAL;
diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c
index 217ad7d..367c590 100644
--- a/drivers/gpu/drm/drm_mm.c
+++ b/drivers/gpu/drm/drm_mm.c
@@ -296,3 +296,4 @@
 
 	drm_free(entry, sizeof(*entry), DRM_MEM_MM);
 }
+EXPORT_SYMBOL(drm_mm_takedown);
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
new file mode 100644
index 0000000..c9b80fd
--- /dev/null
+++ b/drivers/gpu/drm/drm_modes.c
@@ -0,0 +1,576 @@
+/*
+ * The list_sort function is (presumably) licensed under the GPL (see the
+ * top level "COPYING" file for details).
+ *
+ * The remainder of this file is:
+ *
+ * Copyright © 1997-2003 by The XFree86 Project, Inc.
+ * Copyright © 2007 Dave Airlie
+ * Copyright © 2007-2008 Intel Corporation
+ *   Jesse Barnes <jesse.barnes@intel.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of the copyright holder(s)
+ * and author(s) shall not be used in advertising or otherwise to promote
+ * the sale, use or other dealings in this Software without prior written
+ * authorization from the copyright holder(s) and author(s).
+ */
+
+#include <linux/list.h>
+#include "drmP.h"
+#include "drm.h"
+#include "drm_crtc.h"
+
+/**
+ * drm_mode_debug_printmodeline - debug print a mode
+ * @dev: DRM device
+ * @mode: mode to print
+ *
+ * LOCKING:
+ * None.
+ *
+ * Describe @mode using DRM_DEBUG.
+ */
+void drm_mode_debug_printmodeline(struct drm_display_mode *mode)
+{
+	DRM_DEBUG("Modeline %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x\n",
+		  mode->base.id, mode->name, mode->vrefresh, mode->clock,
+		  mode->hdisplay, mode->hsync_start,
+		  mode->hsync_end, mode->htotal,
+		  mode->vdisplay, mode->vsync_start,
+		  mode->vsync_end, mode->vtotal, mode->type, mode->flags);
+}
+EXPORT_SYMBOL(drm_mode_debug_printmodeline);
+
+/**
+ * drm_mode_set_name - set the name on a mode
+ * @mode: name will be set in this mode
+ *
+ * LOCKING:
+ * None.
+ *
+ * Set the name of @mode to a standard format.
+ */
+void drm_mode_set_name(struct drm_display_mode *mode)
+{
+	snprintf(mode->name, DRM_DISPLAY_MODE_LEN, "%dx%d", mode->hdisplay,
+		 mode->vdisplay);
+}
+EXPORT_SYMBOL(drm_mode_set_name);
+
+/**
+ * drm_mode_list_concat - move modes from one list to another
+ * @head: source list
+ * @new: dst list
+ *
+ * LOCKING:
+ * Caller must ensure both lists are locked.
+ *
+ * Move all the modes from @head to @new.
+ */
+void drm_mode_list_concat(struct list_head *head, struct list_head *new)
+{
+
+	struct list_head *entry, *tmp;
+
+	list_for_each_safe(entry, tmp, head) {
+		list_move_tail(entry, new);
+	}
+}
+EXPORT_SYMBOL(drm_mode_list_concat);
+
+/**
+ * drm_mode_width - get the width of a mode
+ * @mode: mode
+ *
+ * LOCKING:
+ * None.
+ *
+ * Return @mode's width (hdisplay) value.
+ *
+ * FIXME: is this needed?
+ *
+ * RETURNS:
+ * @mode->hdisplay
+ */
+int drm_mode_width(struct drm_display_mode *mode)
+{
+	return mode->hdisplay;
+
+}
+EXPORT_SYMBOL(drm_mode_width);
+
+/**
+ * drm_mode_height - get the height of a mode
+ * @mode: mode
+ *
+ * LOCKING:
+ * None.
+ *
+ * Return @mode's height (vdisplay) value.
+ *
+ * FIXME: is this needed?
+ *
+ * RETURNS:
+ * @mode->vdisplay
+ */
+int drm_mode_height(struct drm_display_mode *mode)
+{
+	return mode->vdisplay;
+}
+EXPORT_SYMBOL(drm_mode_height);
+
+/**
+ * drm_mode_vrefresh - get the vrefresh of a mode
+ * @mode: mode
+ *
+ * LOCKING:
+ * None.
+ *
+ * Return @mode's vrefresh rate or calculate it if necessary.
+ *
+ * FIXME: why is this needed?  shouldn't vrefresh be set already?
+ *
+ * RETURNS:
+ * Vertical refresh rate of @mode x 1000. For precision reasons.
+ */
+int drm_mode_vrefresh(struct drm_display_mode *mode)
+{
+	int refresh = 0;
+	unsigned int calc_val;
+
+	if (mode->vrefresh > 0)
+		refresh = mode->vrefresh;
+	else if (mode->htotal > 0 && mode->vtotal > 0) {
+		/* work out vrefresh the value will be x1000 */
+		calc_val = (mode->clock * 1000);
+
+		calc_val /= mode->htotal;
+		calc_val *= 1000;
+		calc_val /= mode->vtotal;
+
+		refresh = calc_val;
+		if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+			refresh *= 2;
+		if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
+			refresh /= 2;
+		if (mode->vscan > 1)
+			refresh /= mode->vscan;
+	}
+	return refresh;
+}
+EXPORT_SYMBOL(drm_mode_vrefresh);
+
+/**
+ * drm_mode_set_crtcinfo - set CRTC modesetting parameters
+ * @p: mode
+ * @adjust_flags: unused? (FIXME)
+ *
+ * LOCKING:
+ * None.
+ *
+ * Setup the CRTC modesetting parameters for @p, adjusting if necessary.
+ */
+void drm_mode_set_crtcinfo(struct drm_display_mode *p, int adjust_flags)
+{
+	if ((p == NULL) || ((p->type & DRM_MODE_TYPE_CRTC_C) == DRM_MODE_TYPE_BUILTIN))
+		return;
+
+	p->crtc_hdisplay = p->hdisplay;
+	p->crtc_hsync_start = p->hsync_start;
+	p->crtc_hsync_end = p->hsync_end;
+	p->crtc_htotal = p->htotal;
+	p->crtc_hskew = p->hskew;
+	p->crtc_vdisplay = p->vdisplay;
+	p->crtc_vsync_start = p->vsync_start;
+	p->crtc_vsync_end = p->vsync_end;
+	p->crtc_vtotal = p->vtotal;
+
+	if (p->flags & DRM_MODE_FLAG_INTERLACE) {
+		if (adjust_flags & CRTC_INTERLACE_HALVE_V) {
+			p->crtc_vdisplay /= 2;
+			p->crtc_vsync_start /= 2;
+			p->crtc_vsync_end /= 2;
+			p->crtc_vtotal /= 2;
+		}
+
+		p->crtc_vtotal |= 1;
+	}
+
+	if (p->flags & DRM_MODE_FLAG_DBLSCAN) {
+		p->crtc_vdisplay *= 2;
+		p->crtc_vsync_start *= 2;
+		p->crtc_vsync_end *= 2;
+		p->crtc_vtotal *= 2;
+	}
+
+	if (p->vscan > 1) {
+		p->crtc_vdisplay *= p->vscan;
+		p->crtc_vsync_start *= p->vscan;
+		p->crtc_vsync_end *= p->vscan;
+		p->crtc_vtotal *= p->vscan;
+	}
+
+	p->crtc_vblank_start = min(p->crtc_vsync_start, p->crtc_vdisplay);
+	p->crtc_vblank_end = max(p->crtc_vsync_end, p->crtc_vtotal);
+	p->crtc_hblank_start = min(p->crtc_hsync_start, p->crtc_hdisplay);
+	p->crtc_hblank_end = max(p->crtc_hsync_end, p->crtc_htotal);
+
+	p->crtc_hadjusted = false;
+	p->crtc_vadjusted = false;
+}
+EXPORT_SYMBOL(drm_mode_set_crtcinfo);
+
+
+/**
+ * drm_mode_duplicate - allocate and duplicate an existing mode
+ * @m: mode to duplicate
+ *
+ * LOCKING:
+ * None.
+ *
+ * Just allocate a new mode, copy the existing mode into it, and return
+ * a pointer to it.  Used to create new instances of established modes.
+ */
+struct drm_display_mode *drm_mode_duplicate(struct drm_device *dev,
+					    struct drm_display_mode *mode)
+{
+	struct drm_display_mode *nmode;
+	int new_id;
+
+	nmode = drm_mode_create(dev);
+	if (!nmode)
+		return NULL;
+
+	new_id = nmode->base.id;
+	*nmode = *mode;
+	nmode->base.id = new_id;
+	INIT_LIST_HEAD(&nmode->head);
+	return nmode;
+}
+EXPORT_SYMBOL(drm_mode_duplicate);
+
+/**
+ * drm_mode_equal - test modes for equality
+ * @mode1: first mode
+ * @mode2: second mode
+ *
+ * LOCKING:
+ * None.
+ *
+ * Check to see if @mode1 and @mode2 are equivalent.
+ *
+ * RETURNS:
+ * True if the modes are equal, false otherwise.
+ */
+bool drm_mode_equal(struct drm_display_mode *mode1, struct drm_display_mode *mode2)
+{
+	/* do clock check convert to PICOS so fb modes get matched
+	 * the same */
+	if (mode1->clock && mode2->clock) {
+		if (KHZ2PICOS(mode1->clock) != KHZ2PICOS(mode2->clock))
+			return false;
+	} else if (mode1->clock != mode2->clock)
+		return false;
+
+	if (mode1->hdisplay == mode2->hdisplay &&
+	    mode1->hsync_start == mode2->hsync_start &&
+	    mode1->hsync_end == mode2->hsync_end &&
+	    mode1->htotal == mode2->htotal &&
+	    mode1->hskew == mode2->hskew &&
+	    mode1->vdisplay == mode2->vdisplay &&
+	    mode1->vsync_start == mode2->vsync_start &&
+	    mode1->vsync_end == mode2->vsync_end &&
+	    mode1->vtotal == mode2->vtotal &&
+	    mode1->vscan == mode2->vscan &&
+	    mode1->flags == mode2->flags)
+		return true;
+
+	return false;
+}
+EXPORT_SYMBOL(drm_mode_equal);
+
+/**
+ * drm_mode_validate_size - make sure modes adhere to size constraints
+ * @dev: DRM device
+ * @mode_list: list of modes to check
+ * @maxX: maximum width
+ * @maxY: maximum height
+ * @maxPitch: max pitch
+ *
+ * LOCKING:
+ * Caller must hold a lock protecting @mode_list.
+ *
+ * The DRM device (@dev) has size and pitch limits.  Here we validate the
+ * modes we probed for @dev against those limits and set their status as
+ * necessary.
+ */
+void drm_mode_validate_size(struct drm_device *dev,
+			    struct list_head *mode_list,
+			    int maxX, int maxY, int maxPitch)
+{
+	struct drm_display_mode *mode;
+
+	list_for_each_entry(mode, mode_list, head) {
+		if (maxPitch > 0 && mode->hdisplay > maxPitch)
+			mode->status = MODE_BAD_WIDTH;
+
+		if (maxX > 0 && mode->hdisplay > maxX)
+			mode->status = MODE_VIRTUAL_X;
+
+		if (maxY > 0 && mode->vdisplay > maxY)
+			mode->status = MODE_VIRTUAL_Y;
+	}
+}
+EXPORT_SYMBOL(drm_mode_validate_size);
+
+/**
+ * drm_mode_validate_clocks - validate modes against clock limits
+ * @dev: DRM device
+ * @mode_list: list of modes to check
+ * @min: minimum clock rate array
+ * @max: maximum clock rate array
+ * @n_ranges: number of clock ranges (size of arrays)
+ *
+ * LOCKING:
+ * Caller must hold a lock protecting @mode_list.
+ *
+ * Some code may need to check a mode list against the clock limits of the
+ * device in question.  This function walks the mode list, testing to make
+ * sure each mode falls within a given range (defined by @min and @max
+ * arrays) and sets @mode->status as needed.
+ */
+void drm_mode_validate_clocks(struct drm_device *dev,
+			      struct list_head *mode_list,
+			      int *min, int *max, int n_ranges)
+{
+	struct drm_display_mode *mode;
+	int i;
+
+	list_for_each_entry(mode, mode_list, head) {
+		bool good = false;
+		for (i = 0; i < n_ranges; i++) {
+			if (mode->clock >= min[i] && mode->clock <= max[i]) {
+				good = true;
+				break;
+			}
+		}
+		if (!good)
+			mode->status = MODE_CLOCK_RANGE;
+	}
+}
+EXPORT_SYMBOL(drm_mode_validate_clocks);
+
+/**
+ * drm_mode_prune_invalid - remove invalid modes from mode list
+ * @dev: DRM device
+ * @mode_list: list of modes to check
+ * @verbose: be verbose about it
+ *
+ * LOCKING:
+ * Caller must hold a lock protecting @mode_list.
+ *
+ * Once mode list generation is complete, a caller can use this routine to
+ * remove invalid modes from a mode list.  If any of the modes have a
+ * status other than %MODE_OK, they are removed from @mode_list and freed.
+ */
+void drm_mode_prune_invalid(struct drm_device *dev,
+			    struct list_head *mode_list, bool verbose)
+{
+	struct drm_display_mode *mode, *t;
+
+	list_for_each_entry_safe(mode, t, mode_list, head) {
+		if (mode->status != MODE_OK) {
+			list_del(&mode->head);
+			if (verbose) {
+				drm_mode_debug_printmodeline(mode);
+				DRM_DEBUG("Not using %s mode %d\n", mode->name, mode->status);
+			}
+			drm_mode_destroy(dev, mode);
+		}
+	}
+}
+EXPORT_SYMBOL(drm_mode_prune_invalid);
+
+/**
+ * drm_mode_compare - compare modes for favorability
+ * @lh_a: list_head for first mode
+ * @lh_b: list_head for second mode
+ *
+ * LOCKING:
+ * None.
+ *
+ * Compare two modes, given by @lh_a and @lh_b, returning a value indicating
+ * which is better.
+ *
+ * RETURNS:
+ * Negative if @lh_a is better than @lh_b, zero if they're equivalent, or
+ * positive if @lh_b is better than @lh_a.
+ */
+static int drm_mode_compare(struct list_head *lh_a, struct list_head *lh_b)
+{
+	struct drm_display_mode *a = list_entry(lh_a, struct drm_display_mode, head);
+	struct drm_display_mode *b = list_entry(lh_b, struct drm_display_mode, head);
+	int diff;
+
+	diff = ((b->type & DRM_MODE_TYPE_PREFERRED) != 0) -
+		((a->type & DRM_MODE_TYPE_PREFERRED) != 0);
+	if (diff)
+		return diff;
+	diff = b->hdisplay * b->vdisplay - a->hdisplay * a->vdisplay;
+	if (diff)
+		return diff;
+	diff = b->clock - a->clock;
+	return diff;
+}
+
+/* FIXME: what we don't have a list sort function? */
+/* list sort from Mark J Roberts (mjr@znex.org) */
+void list_sort(struct list_head *head,
+	       int (*cmp)(struct list_head *a, struct list_head *b))
+{
+	struct list_head *p, *q, *e, *list, *tail, *oldhead;
+	int insize, nmerges, psize, qsize, i;
+
+	list = head->next;
+	list_del(head);
+	insize = 1;
+	for (;;) {
+		p = oldhead = list;
+		list = tail = NULL;
+		nmerges = 0;
+
+		while (p) {
+			nmerges++;
+			q = p;
+			psize = 0;
+			for (i = 0; i < insize; i++) {
+				psize++;
+				q = q->next == oldhead ? NULL : q->next;
+				if (!q)
+					break;
+			}
+
+			qsize = insize;
+			while (psize > 0 || (qsize > 0 && q)) {
+				if (!psize) {
+					e = q;
+					q = q->next;
+					qsize--;
+					if (q == oldhead)
+						q = NULL;
+				} else if (!qsize || !q) {
+					e = p;
+					p = p->next;
+					psize--;
+					if (p == oldhead)
+						p = NULL;
+				} else if (cmp(p, q) <= 0) {
+					e = p;
+					p = p->next;
+					psize--;
+					if (p == oldhead)
+						p = NULL;
+				} else {
+					e = q;
+					q = q->next;
+					qsize--;
+					if (q == oldhead)
+						q = NULL;
+				}
+				if (tail)
+					tail->next = e;
+				else
+					list = e;
+				e->prev = tail;
+				tail = e;
+			}
+			p = q;
+		}
+
+		tail->next = list;
+		list->prev = tail;
+
+		if (nmerges <= 1)
+			break;
+
+		insize *= 2;
+	}
+
+	head->next = list;
+	head->prev = list->prev;
+	list->prev->next = head;
+	list->prev = head;
+}
+
+/**
+ * drm_mode_sort - sort mode list
+ * @mode_list: list to sort
+ *
+ * LOCKING:
+ * Caller must hold a lock protecting @mode_list.
+ *
+ * Sort @mode_list by favorability, putting good modes first.
+ */
+void drm_mode_sort(struct list_head *mode_list)
+{
+	list_sort(mode_list, drm_mode_compare);
+}
+EXPORT_SYMBOL(drm_mode_sort);
+
+/**
+ * drm_mode_connector_list_update - update the mode list for the connector
+ * @connector: the connector to update
+ *
+ * LOCKING:
+ * Caller must hold a lock protecting @mode_list.
+ *
+ * This moves the modes from the @connector probed_modes list
+ * to the actual mode list. It compares the probed mode against the current
+ * list and only adds different modes. All modes unverified after this point
+ * will be removed by the prune invalid modes.
+ */
+void drm_mode_connector_list_update(struct drm_connector *connector)
+{
+	struct drm_display_mode *mode;
+	struct drm_display_mode *pmode, *pt;
+	int found_it;
+
+	list_for_each_entry_safe(pmode, pt, &connector->probed_modes,
+				 head) {
+		found_it = 0;
+		/* go through current modes checking for the new probed mode */
+		list_for_each_entry(mode, &connector->modes, head) {
+			if (drm_mode_equal(pmode, mode)) {
+				found_it = 1;
+				/* if equal delete the probed mode */
+				mode->status = pmode->status;
+				list_del(&pmode->head);
+				drm_mode_destroy(connector->dev, pmode);
+				break;
+			}
+		}
+
+		if (!found_it) {
+			list_move_tail(&pmode->head, &connector->modes);
+		}
+	}
+}
+EXPORT_SYMBOL(drm_mode_connector_list_update);
diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c
index ea7f9e5..5ca132a 100644
--- a/drivers/gpu/drm/drm_stub.c
+++ b/drivers/gpu/drm/drm_stub.c
@@ -57,6 +57,14 @@
 	int ret;
 	int base = 0, limit = 63;
 
+	if (type == DRM_MINOR_CONTROL) {
+                base += 64;
+                limit = base + 127;
+        } else if (type == DRM_MINOR_RENDER) {
+                base += 128;
+                limit = base + 255;
+        }
+
 again:
 	if (idr_pre_get(&drm_minors_idr, GFP_KERNEL) == 0) {
 		DRM_ERROR("Out of memory expanding drawable idr\n");
@@ -362,12 +370,28 @@
 		printk(KERN_ERR "DRM: Fill_in_dev failed.\n");
 		goto err_g2;
 	}
-	if ((ret = drm_get_minor(dev, &dev->primary, DRM_MINOR_LEGACY)))
-		goto err_g2;
 
-	if (dev->driver->load)
-		if ((ret = dev->driver->load(dev, ent->driver_data)))
+	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+		ret = drm_get_minor(dev, &dev->control, DRM_MINOR_CONTROL);
+		if (ret)
+			goto err_g2;
+	}
+
+	if ((ret = drm_get_minor(dev, &dev->primary, DRM_MINOR_LEGACY)))
+		goto err_g3;
+
+	if (dev->driver->load) {
+		ret = dev->driver->load(dev, ent->driver_data);
+		if (ret)
 			goto err_g3;
+	}
+
+        /* setup the grouping for the legacy output */
+	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+		ret = drm_mode_group_init_legacy_group(dev, &dev->primary->mode_group);
+		if (ret)
+			goto err_g3;
+	}
 
 	list_add_tail(&dev->driver_item, &driver->device_list);
 
diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c
index 1611b9b..65d72d0 100644
--- a/drivers/gpu/drm/drm_sysfs.c
+++ b/drivers/gpu/drm/drm_sysfs.c
@@ -20,6 +20,7 @@
 #include "drmP.h"
 
 #define to_drm_minor(d) container_of(d, struct drm_minor, kdev)
+#define to_drm_connector(d) container_of(d, struct drm_connector, kdev)
 
 /**
  * drm_sysfs_suspend - DRM class suspend hook
@@ -34,7 +35,7 @@
 	struct drm_minor *drm_minor = to_drm_minor(dev);
 	struct drm_device *drm_dev = drm_minor->dev;
 
-	if (drm_dev->driver->suspend)
+	if (drm_minor->type == DRM_MINOR_LEGACY && drm_dev->driver->suspend)
 		return drm_dev->driver->suspend(drm_dev, state);
 
 	return 0;
@@ -52,7 +53,7 @@
 	struct drm_minor *drm_minor = to_drm_minor(dev);
 	struct drm_device *drm_dev = drm_minor->dev;
 
-	if (drm_dev->driver->resume)
+	if (drm_minor->type == DRM_MINOR_LEGACY && drm_dev->driver->resume)
 		return drm_dev->driver->resume(drm_dev);
 
 	return 0;
@@ -144,6 +145,323 @@
 	return;
 }
 
+/*
+ * Connector properties
+ */
+static ssize_t status_show(struct device *device,
+			   struct device_attribute *attr,
+			   char *buf)
+{
+	struct drm_connector *connector = to_drm_connector(device);
+	enum drm_connector_status status;
+
+	status = connector->funcs->detect(connector);
+	return snprintf(buf, PAGE_SIZE, "%s",
+			drm_get_connector_status_name(status));
+}
+
+static ssize_t dpms_show(struct device *device,
+			   struct device_attribute *attr,
+			   char *buf)
+{
+	struct drm_connector *connector = to_drm_connector(device);
+	struct drm_device *dev = connector->dev;
+	uint64_t dpms_status;
+	int ret;
+
+	ret = drm_connector_property_get_value(connector,
+					    dev->mode_config.dpms_property,
+					    &dpms_status);
+	if (ret)
+		return 0;
+
+	return snprintf(buf, PAGE_SIZE, "%s",
+			drm_get_dpms_name((int)dpms_status));
+}
+
+static ssize_t enabled_show(struct device *device,
+			    struct device_attribute *attr,
+			   char *buf)
+{
+	struct drm_connector *connector = to_drm_connector(device);
+
+	return snprintf(buf, PAGE_SIZE, connector->encoder ? "enabled" :
+			"disabled");
+}
+
+static ssize_t edid_show(struct kobject *kobj, struct bin_attribute *attr,
+			 char *buf, loff_t off, size_t count)
+{
+	struct device *connector_dev = container_of(kobj, struct device, kobj);
+	struct drm_connector *connector = to_drm_connector(connector_dev);
+	unsigned char *edid;
+	size_t size;
+
+	if (!connector->edid_blob_ptr)
+		return 0;
+
+	edid = connector->edid_blob_ptr->data;
+	size = connector->edid_blob_ptr->length;
+	if (!edid)
+		return 0;
+
+	if (off >= size)
+		return 0;
+
+	if (off + count > size)
+		count = size - off;
+	memcpy(buf, edid + off, count);
+
+	return count;
+}
+
+static ssize_t modes_show(struct device *device,
+			   struct device_attribute *attr,
+			   char *buf)
+{
+	struct drm_connector *connector = to_drm_connector(device);
+	struct drm_display_mode *mode;
+	int written = 0;
+
+	list_for_each_entry(mode, &connector->modes, head) {
+		written += snprintf(buf + written, PAGE_SIZE - written, "%s\n",
+				    mode->name);
+	}
+
+	return written;
+}
+
+static ssize_t subconnector_show(struct device *device,
+			   struct device_attribute *attr,
+			   char *buf)
+{
+	struct drm_connector *connector = to_drm_connector(device);
+	struct drm_device *dev = connector->dev;
+	struct drm_property *prop = NULL;
+	uint64_t subconnector;
+	int is_tv = 0;
+	int ret;
+
+	switch (connector->connector_type) {
+		case DRM_MODE_CONNECTOR_DVII:
+			prop = dev->mode_config.dvi_i_subconnector_property;
+			break;
+		case DRM_MODE_CONNECTOR_Composite:
+		case DRM_MODE_CONNECTOR_SVIDEO:
+		case DRM_MODE_CONNECTOR_Component:
+			prop = dev->mode_config.tv_subconnector_property;
+			is_tv = 1;
+			break;
+		default:
+			DRM_ERROR("Wrong connector type for this property\n");
+			return 0;
+	}
+
+	if (!prop) {
+		DRM_ERROR("Unable to find subconnector property\n");
+		return 0;
+	}
+
+	ret = drm_connector_property_get_value(connector, prop, &subconnector);
+	if (ret)
+		return 0;
+
+	return snprintf(buf, PAGE_SIZE, "%s", is_tv ?
+			drm_get_tv_subconnector_name((int)subconnector) :
+			drm_get_dvi_i_subconnector_name((int)subconnector));
+}
+
+static ssize_t select_subconnector_show(struct device *device,
+			   struct device_attribute *attr,
+			   char *buf)
+{
+	struct drm_connector *connector = to_drm_connector(device);
+	struct drm_device *dev = connector->dev;
+	struct drm_property *prop = NULL;
+	uint64_t subconnector;
+	int is_tv = 0;
+	int ret;
+
+	switch (connector->connector_type) {
+		case DRM_MODE_CONNECTOR_DVII:
+			prop = dev->mode_config.dvi_i_select_subconnector_property;
+			break;
+		case DRM_MODE_CONNECTOR_Composite:
+		case DRM_MODE_CONNECTOR_SVIDEO:
+		case DRM_MODE_CONNECTOR_Component:
+			prop = dev->mode_config.tv_select_subconnector_property;
+			is_tv = 1;
+			break;
+		default:
+			DRM_ERROR("Wrong connector type for this property\n");
+			return 0;
+	}
+
+	if (!prop) {
+		DRM_ERROR("Unable to find select subconnector property\n");
+		return 0;
+	}
+
+	ret = drm_connector_property_get_value(connector, prop, &subconnector);
+	if (ret)
+		return 0;
+
+	return snprintf(buf, PAGE_SIZE, "%s", is_tv ?
+			drm_get_tv_select_name((int)subconnector) :
+			drm_get_dvi_i_select_name((int)subconnector));
+}
+
+static struct device_attribute connector_attrs[] = {
+	__ATTR_RO(status),
+	__ATTR_RO(enabled),
+	__ATTR_RO(dpms),
+	__ATTR_RO(modes),
+};
+
+/* These attributes are for both DVI-I connectors and all types of tv-out. */
+static struct device_attribute connector_attrs_opt1[] = {
+	__ATTR_RO(subconnector),
+	__ATTR_RO(select_subconnector),
+};
+
+static struct bin_attribute edid_attr = {
+	.attr.name = "edid",
+	.size = 128,
+	.read = edid_show,
+};
+
+/**
+ * drm_sysfs_connector_add - add an connector to sysfs
+ * @connector: connector to add
+ *
+ * Create an connector device in sysfs, along with its associated connector
+ * properties (so far, connection status, dpms, mode list & edid) and
+ * generate a hotplug event so userspace knows there's a new connector
+ * available.
+ *
+ * Note:
+ * This routine should only be called *once* for each DRM minor registered.
+ * A second call for an already registered device will trigger the BUG_ON
+ * below.
+ */
+int drm_sysfs_connector_add(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	int ret = 0, i, j;
+
+	/* We shouldn't get called more than once for the same connector */
+	BUG_ON(device_is_registered(&connector->kdev));
+
+	connector->kdev.parent = &dev->primary->kdev;
+	connector->kdev.class = drm_class;
+	connector->kdev.release = drm_sysfs_device_release;
+
+	DRM_DEBUG("adding \"%s\" to sysfs\n",
+		  drm_get_connector_name(connector));
+
+	snprintf(connector->kdev.bus_id, BUS_ID_SIZE, "card%d-%s",
+		 dev->primary->index, drm_get_connector_name(connector));
+	ret = device_register(&connector->kdev);
+
+	if (ret) {
+		DRM_ERROR("failed to register connector device: %d\n", ret);
+		goto out;
+	}
+
+	/* Standard attributes */
+
+	for (i = 0; i < ARRAY_SIZE(connector_attrs); i++) {
+		ret = device_create_file(&connector->kdev, &connector_attrs[i]);
+		if (ret)
+			goto err_out_files;
+	}
+
+	/* Optional attributes */
+	/*
+	 * In the long run it maybe a good idea to make one set of
+	 * optionals per connector type.
+	 */
+	switch (connector->connector_type) {
+		case DRM_MODE_CONNECTOR_DVII:
+		case DRM_MODE_CONNECTOR_Composite:
+		case DRM_MODE_CONNECTOR_SVIDEO:
+		case DRM_MODE_CONNECTOR_Component:
+			for (i = 0; i < ARRAY_SIZE(connector_attrs_opt1); i++) {
+				ret = device_create_file(&connector->kdev, &connector_attrs_opt1[i]);
+				if (ret)
+					goto err_out_files;
+			}
+			break;
+		default:
+			break;
+	}
+
+	ret = sysfs_create_bin_file(&connector->kdev.kobj, &edid_attr);
+	if (ret)
+		goto err_out_files;
+
+	/* Let userspace know we have a new connector */
+	drm_sysfs_hotplug_event(dev);
+
+	return 0;
+
+err_out_files:
+	if (i > 0)
+		for (j = 0; j < i; j++)
+			device_remove_file(&connector->kdev,
+					   &connector_attrs[i]);
+	device_unregister(&connector->kdev);
+
+out:
+	return ret;
+}
+EXPORT_SYMBOL(drm_sysfs_connector_add);
+
+/**
+ * drm_sysfs_connector_remove - remove an connector device from sysfs
+ * @connector: connector to remove
+ *
+ * Remove @connector and its associated attributes from sysfs.  Note that
+ * the device model core will take care of sending the "remove" uevent
+ * at this time, so we don't need to do it.
+ *
+ * Note:
+ * This routine should only be called if the connector was previously
+ * successfully registered.  If @connector hasn't been registered yet,
+ * you'll likely see a panic somewhere deep in sysfs code when called.
+ */
+void drm_sysfs_connector_remove(struct drm_connector *connector)
+{
+	int i;
+
+	DRM_DEBUG("removing \"%s\" from sysfs\n",
+		  drm_get_connector_name(connector));
+
+	for (i = 0; i < ARRAY_SIZE(connector_attrs); i++)
+		device_remove_file(&connector->kdev, &connector_attrs[i]);
+	sysfs_remove_bin_file(&connector->kdev.kobj, &edid_attr);
+	device_unregister(&connector->kdev);
+}
+EXPORT_SYMBOL(drm_sysfs_connector_remove);
+
+/**
+ * drm_sysfs_hotplug_event - generate a DRM uevent
+ * @dev: DRM device
+ *
+ * Send a uevent for the DRM device specified by @dev.  Currently we only
+ * set HOTPLUG=1 in the uevent environment, but this could be expanded to
+ * deal with other types of events.
+ */
+void drm_sysfs_hotplug_event(struct drm_device *dev)
+{
+	char *event_string = "HOTPLUG=1";
+	char *envp[] = { event_string, NULL };
+
+	DRM_DEBUG("generating hotplug event\n");
+
+	kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, envp);
+}
+
 /**
  * drm_sysfs_device_add - adds a class device to sysfs for a character driver
  * @dev: DRM device to be added
@@ -163,7 +481,12 @@
 	minor->kdev.class = drm_class;
 	minor->kdev.release = drm_sysfs_device_release;
 	minor->kdev.devt = minor->device;
-	minor_str = "card%d";
+	if (minor->type == DRM_MINOR_CONTROL)
+		minor_str = "controlD%d";
+        else if (minor->type == DRM_MINOR_RENDER)
+                minor_str = "renderD%d";
+        else
+                minor_str = "card%d";
 
 	snprintf(minor->kdev.bus_id, BUS_ID_SIZE, minor_str, minor->index);
 
diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c
index 448d209..e621072 100644
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -112,6 +112,23 @@
 static int 		vga_scan_lines		__read_mostly;
 static unsigned int 	vga_rolled_over;
 
+int vgacon_text_mode_force = 0;
+
+bool vgacon_text_force(void)
+{
+	return vgacon_text_mode_force ? true : false;
+}
+EXPORT_SYMBOL(vgacon_text_force);
+
+static int __init text_mode(char *str)
+{
+	vgacon_text_mode_force = 1;
+	return 1;
+}
+
+/* force text mode - used by kernel modesetting */
+__setup("nomodeset", text_mode);
+
 static int __init no_scroll(char *str)
 {
 	/*