// SPDX-License-Identifier: GPL-2.0+
//
// Copyright 2012 Freescale Semiconductor, Inc.

#include <dt-bindings/gpio/gpio.h>
#include "imx28-pinfunc.h"

/ {
	#address-cells = <1>;
	#size-cells = <1>;

	interrupt-parent = <&icoll>;
	/*
	 * The decompressor and also some bootloaders rely on a
	 * pre-existing /chosen node to be available to insert the
	 * command line and merge other ATAGS info.
	 */
	chosen {};

	aliases {
		ethernet0 = &mac0;
		ethernet1 = &mac1;
		gpio0 = &gpio0;
		gpio1 = &gpio1;
		gpio2 = &gpio2;
		gpio3 = &gpio3;
		gpio4 = &gpio4;
		saif0 = &saif0;
		saif1 = &saif1;
		serial0 = &auart0;
		serial1 = &auart1;
		serial2 = &auart2;
		serial3 = &auart3;
		serial4 = &auart4;
		spi0 = &ssp1;
		spi1 = &ssp2;
		usbphy0 = &usbphy0;
		usbphy1 = &usbphy1;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu@0 {
			compatible = "arm,arm926ej-s";
			device_type = "cpu";
			reg = <0>;
		};
	};

	apb@80000000 {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0x80000000 0x80000>;
		ranges;

		apbh@80000000 {
			compatible = "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0x80000000 0x3c900>;
			ranges;

			icoll: interrupt-controller@80000000 {
				compatible = "fsl,imx28-icoll", "fsl,icoll";
				interrupt-controller;
				#interrupt-cells = <1>;
				reg = <0x80000000 0x2000>;
			};

			hsadc: hsadc@80002000 {
				reg = <0x80002000 0x2000>;
				interrupts = <13>;
				dmas = <&dma_apbh 12>;
				dma-names = "rx";
				status = "disabled";
			};

			dma_apbh: dma-controller@80004000 {
				compatible = "fsl,imx28-dma-apbh";
				reg = <0x80004000 0x2000>;
				interrupts = <82>, <83>, <84>, <85>,
					     <88>, <88>, <88>, <88>,
					     <88>, <88>, <88>, <88>,
					     <87>, <86>, <0>, <0>;
				#dma-cells = <1>;
				dma-channels = <16>;
				clocks = <&clks 25>;
			};

			perfmon: perfmon@80006000 {
				reg = <0x80006000 0x800>;
				interrupts = <27>;
				status = "disabled";
			};

			gpmi: nand-controller@8000c000 {
				compatible = "fsl,imx28-gpmi-nand";
				#address-cells = <1>;
				#size-cells = <1>;
				reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
				reg-names = "gpmi-nand", "bch";
				interrupts = <41>;
				interrupt-names = "bch";
				clocks = <&clks 50>;
				clock-names = "gpmi_io";
				assigned-clocks = <&clks 13>;
				assigned-clock-parents = <&clks 10>;
				dmas = <&dma_apbh 4>;
				dma-names = "rx-tx";
				status = "disabled";
			};

			ssp0: spi@80010000 {
				#address-cells = <1>;
				#size-cells = <0>;
				reg = <0x80010000 0x2000>;
				interrupts = <96>;
				clocks = <&clks 46>;
				dmas = <&dma_apbh 0>;
				dma-names = "rx-tx";
				status = "disabled";
			};

			ssp1: spi@80012000 {
				#address-cells = <1>;
				#size-cells = <0>;
				reg = <0x80012000 0x2000>;
				interrupts = <97>;
				clocks = <&clks 47>;
				dmas = <&dma_apbh 1>;
				dma-names = "rx-tx";
				status = "disabled";
			};

			ssp2: spi@80014000 {
				#address-cells = <1>;
				#size-cells = <0>;
				reg = <0x80014000 0x2000>;
				interrupts = <98>;
				clocks = <&clks 48>;
				dmas = <&dma_apbh 2>;
				dma-names = "rx-tx";
				status = "disabled";
			};

			ssp3: spi@80016000 {
				#address-cells = <1>;
				#size-cells = <0>;
				reg = <0x80016000 0x2000>;
				interrupts = <99>;
				clocks = <&clks 49>;
				dmas = <&dma_apbh 3>;
				dma-names = "rx-tx";
				status = "disabled";
			};

			pinctrl: pinctrl@80018000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx28-pinctrl", "simple-bus";
				reg = <0x80018000 0x2000>;

				gpio0: gpio@0 {
					compatible = "fsl,imx28-gpio";
					reg = <0>;
					interrupts = <127>;
					gpio-controller;
					#gpio-cells = <2>;
					interrupt-controller;
					#interrupt-cells = <2>;
				};

				gpio1: gpio@1 {
					compatible = "fsl,imx28-gpio";
					reg = <1>;
					interrupts = <126>;
					gpio-controller;
					#gpio-cells = <2>;
					interrupt-controller;
					#interrupt-cells = <2>;
				};

				gpio2: gpio@2 {
					compatible = "fsl,imx28-gpio";
					reg = <2>;
					interrupts = <125>;
					gpio-controller;
					#gpio-cells = <2>;
					interrupt-controller;
					#interrupt-cells = <2>;
				};

				gpio3: gpio@3 {
					compatible = "fsl,imx28-gpio";
					reg = <3>;
					interrupts = <124>;
					gpio-controller;
					#gpio-cells = <2>;
					interrupt-controller;
					#interrupt-cells = <2>;
				};

				gpio4: gpio@4 {
					compatible = "fsl,imx28-gpio";
					reg = <4>;
					interrupts = <123>;
					gpio-controller;
					#gpio-cells = <2>;
					interrupt-controller;
					#interrupt-cells = <2>;
				};

				duart_pins_a: duart@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_PWM0__DUART_RX
						MX28_PAD_PWM1__DUART_TX
					>;
					fsl,drive-strength = <MXS_DRIVE_4mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				duart_pins_b: duart@1 {
					reg = <1>;
					fsl,pinmux-ids = <
						MX28_PAD_AUART0_CTS__DUART_RX
						MX28_PAD_AUART0_RTS__DUART_TX
					>;
					fsl,drive-strength = <MXS_DRIVE_4mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				duart_4pins_a: duart-4pins@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_AUART0_CTS__DUART_RX
						MX28_PAD_AUART0_RTS__DUART_TX
						MX28_PAD_AUART0_RX__DUART_CTS
						MX28_PAD_AUART0_TX__DUART_RTS
					>;
					fsl,drive-strength = <MXS_DRIVE_4mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				gpmi_pins_a: gpmi-nand@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_GPMI_D00__GPMI_D0
						MX28_PAD_GPMI_D01__GPMI_D1
						MX28_PAD_GPMI_D02__GPMI_D2
						MX28_PAD_GPMI_D03__GPMI_D3
						MX28_PAD_GPMI_D04__GPMI_D4
						MX28_PAD_GPMI_D05__GPMI_D5
						MX28_PAD_GPMI_D06__GPMI_D6
						MX28_PAD_GPMI_D07__GPMI_D7
						MX28_PAD_GPMI_CE0N__GPMI_CE0N
						MX28_PAD_GPMI_RDY0__GPMI_READY0
						MX28_PAD_GPMI_RDN__GPMI_RDN
						MX28_PAD_GPMI_WRN__GPMI_WRN
						MX28_PAD_GPMI_ALE__GPMI_ALE
						MX28_PAD_GPMI_CLE__GPMI_CLE
						MX28_PAD_GPMI_RESETN__GPMI_RESETN
					>;
					fsl,drive-strength = <MXS_DRIVE_4mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				gpmi_status_cfg: gpmi-status-cfg@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_GPMI_RDN__GPMI_RDN
						MX28_PAD_GPMI_WRN__GPMI_WRN
						MX28_PAD_GPMI_RESETN__GPMI_RESETN
					>;
					fsl,drive-strength = <MXS_DRIVE_12mA>;
				};

				auart0_pins_a: auart0@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_AUART0_RX__AUART0_RX
						MX28_PAD_AUART0_TX__AUART0_TX
						MX28_PAD_AUART0_CTS__AUART0_CTS
						MX28_PAD_AUART0_RTS__AUART0_RTS
					>;
					fsl,drive-strength = <MXS_DRIVE_4mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				auart0_2pins_a: auart0-2pins@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_AUART0_RX__AUART0_RX
						MX28_PAD_AUART0_TX__AUART0_TX
					>;
					fsl,drive-strength = <MXS_DRIVE_4mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				auart1_pins_a: auart1@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_AUART1_RX__AUART1_RX
						MX28_PAD_AUART1_TX__AUART1_TX
						MX28_PAD_AUART1_CTS__AUART1_CTS
						MX28_PAD_AUART1_RTS__AUART1_RTS
					>;
					fsl,drive-strength = <MXS_DRIVE_4mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				auart1_2pins_a: auart1-2pins@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_AUART1_RX__AUART1_RX
						MX28_PAD_AUART1_TX__AUART1_TX
					>;
					fsl,drive-strength = <MXS_DRIVE_4mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				auart2_2pins_a: auart2-2pins@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_SSP2_SCK__AUART2_RX
						MX28_PAD_SSP2_MOSI__AUART2_TX
					>;
					fsl,drive-strength = <MXS_DRIVE_4mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				auart2_2pins_b: auart2-2pins@1 {
					reg = <1>;
					fsl,pinmux-ids = <
						MX28_PAD_AUART2_RX__AUART2_RX
						MX28_PAD_AUART2_TX__AUART2_TX
					>;
					fsl,drive-strength = <MXS_DRIVE_4mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				auart2_pins_a: auart2-pins@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_AUART2_RX__AUART2_RX
						MX28_PAD_AUART2_TX__AUART2_TX
						MX28_PAD_AUART2_CTS__AUART2_CTS
						MX28_PAD_AUART2_RTS__AUART2_RTS
					>;
					fsl,drive-strength = <MXS_DRIVE_4mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				auart3_pins_a: auart3@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_AUART3_RX__AUART3_RX
						MX28_PAD_AUART3_TX__AUART3_TX
						MX28_PAD_AUART3_CTS__AUART3_CTS
						MX28_PAD_AUART3_RTS__AUART3_RTS
					>;
					fsl,drive-strength = <MXS_DRIVE_4mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				auart3_2pins_a: auart3-2pins@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_SSP2_MISO__AUART3_RX
						MX28_PAD_SSP2_SS0__AUART3_TX
					>;
					fsl,drive-strength = <MXS_DRIVE_4mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				auart3_2pins_b: auart3-2pins@1 {
					reg = <1>;
					fsl,pinmux-ids = <
						MX28_PAD_AUART3_RX__AUART3_RX
						MX28_PAD_AUART3_TX__AUART3_TX
					>;
					fsl,drive-strength = <MXS_DRIVE_4mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				auart4_2pins_a: auart4@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_SSP3_SCK__AUART4_TX
						MX28_PAD_SSP3_MOSI__AUART4_RX
					>;
					fsl,drive-strength = <MXS_DRIVE_4mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				auart4_2pins_b: auart4@1 {
					reg = <1>;
					fsl,pinmux-ids = <
						MX28_PAD_AUART0_CTS__AUART4_RX
						MX28_PAD_AUART0_RTS__AUART4_TX
					>;
					fsl,drive-strength = <MXS_DRIVE_4mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				mac0_pins_a: mac0@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_ENET0_MDC__ENET0_MDC
						MX28_PAD_ENET0_MDIO__ENET0_MDIO
						MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
						MX28_PAD_ENET0_RXD0__ENET0_RXD0
						MX28_PAD_ENET0_RXD1__ENET0_RXD1
						MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
						MX28_PAD_ENET0_TXD0__ENET0_TXD0
						MX28_PAD_ENET0_TXD1__ENET0_TXD1
						MX28_PAD_ENET_CLK__CLKCTRL_ENET
					>;
					fsl,drive-strength = <MXS_DRIVE_8mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_ENABLE>;
				};

				mac0_pins_b: mac0@1 {
					reg = <1>;
					fsl,pinmux-ids = <
						MX28_PAD_ENET0_MDC__ENET0_MDC
						MX28_PAD_ENET0_MDIO__ENET0_MDIO
						MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
						MX28_PAD_ENET0_RXD0__ENET0_RXD0
						MX28_PAD_ENET0_RXD1__ENET0_RXD1
						MX28_PAD_ENET0_RXD2__ENET0_RXD2
						MX28_PAD_ENET0_RXD3__ENET0_RXD3
						MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
						MX28_PAD_ENET0_TXD0__ENET0_TXD0
						MX28_PAD_ENET0_TXD1__ENET0_TXD1
						MX28_PAD_ENET0_TXD2__ENET0_TXD2
						MX28_PAD_ENET0_TXD3__ENET0_TXD3
						MX28_PAD_ENET_CLK__CLKCTRL_ENET
						MX28_PAD_ENET0_COL__ENET0_COL
						MX28_PAD_ENET0_CRS__ENET0_CRS
						MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK
						MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK
						>;
					fsl,drive-strength = <MXS_DRIVE_8mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_ENABLE>;
				};

				mac1_pins_a: mac1@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_ENET0_CRS__ENET1_RX_EN
						MX28_PAD_ENET0_RXD2__ENET1_RXD0
						MX28_PAD_ENET0_RXD3__ENET1_RXD1
						MX28_PAD_ENET0_COL__ENET1_TX_EN
						MX28_PAD_ENET0_TXD2__ENET1_TXD0
						MX28_PAD_ENET0_TXD3__ENET1_TXD1
					>;
					fsl,drive-strength = <MXS_DRIVE_8mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_ENABLE>;
				};

				mmc0_8bit_pins_a: mmc0-8bit@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_SSP0_DATA0__SSP0_D0
						MX28_PAD_SSP0_DATA1__SSP0_D1
						MX28_PAD_SSP0_DATA2__SSP0_D2
						MX28_PAD_SSP0_DATA3__SSP0_D3
						MX28_PAD_SSP0_DATA4__SSP0_D4
						MX28_PAD_SSP0_DATA5__SSP0_D5
						MX28_PAD_SSP0_DATA6__SSP0_D6
						MX28_PAD_SSP0_DATA7__SSP0_D7
						MX28_PAD_SSP0_CMD__SSP0_CMD
						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
						MX28_PAD_SSP0_SCK__SSP0_SCK
					>;
					fsl,drive-strength = <MXS_DRIVE_8mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_ENABLE>;
				};

				mmc0_4bit_pins_a: mmc0-4bit@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_SSP0_DATA0__SSP0_D0
						MX28_PAD_SSP0_DATA1__SSP0_D1
						MX28_PAD_SSP0_DATA2__SSP0_D2
						MX28_PAD_SSP0_DATA3__SSP0_D3
						MX28_PAD_SSP0_CMD__SSP0_CMD
						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
						MX28_PAD_SSP0_SCK__SSP0_SCK
					>;
					fsl,drive-strength = <MXS_DRIVE_8mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_ENABLE>;
				};

				mmc0_cd_cfg: mmc0-cd-cfg@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
					>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				mmc0_sck_cfg: mmc0-sck-cfg@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_SSP0_SCK__SSP0_SCK
					>;
					fsl,drive-strength = <MXS_DRIVE_12mA>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				mmc1_4bit_pins_a: mmc1-4bit@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_GPMI_D00__SSP1_D0
						MX28_PAD_GPMI_D01__SSP1_D1
						MX28_PAD_GPMI_D02__SSP1_D2
						MX28_PAD_GPMI_D03__SSP1_D3
						MX28_PAD_GPMI_RDY1__SSP1_CMD
						MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
						MX28_PAD_GPMI_WRN__SSP1_SCK
					>;
					fsl,drive-strength = <MXS_DRIVE_8mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_ENABLE>;
				};

				mmc1_cd_cfg: mmc1-cd-cfg@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
					>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				mmc1_sck_cfg: mmc1-sck-cfg@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_GPMI_WRN__SSP1_SCK
					>;
					fsl,drive-strength = <MXS_DRIVE_12mA>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};


				mmc2_4bit_pins_a: mmc2-4bit@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_SSP0_DATA4__SSP2_D0
						MX28_PAD_SSP1_SCK__SSP2_D1
						MX28_PAD_SSP1_CMD__SSP2_D2
						MX28_PAD_SSP0_DATA5__SSP2_D3
						MX28_PAD_SSP0_DATA6__SSP2_CMD
						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
						MX28_PAD_SSP0_DATA7__SSP2_SCK
					>;
					fsl,drive-strength = <MXS_DRIVE_8mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_ENABLE>;
				};

				mmc2_4bit_pins_b: mmc2-4bit@1 {
					reg = <1>;
					fsl,pinmux-ids = <
						MX28_PAD_SSP2_SCK__SSP2_SCK
						MX28_PAD_SSP2_MOSI__SSP2_CMD
						MX28_PAD_SSP2_MISO__SSP2_D0
						MX28_PAD_SSP2_SS0__SSP2_D3
						MX28_PAD_SSP2_SS1__SSP2_D1
						MX28_PAD_SSP2_SS2__SSP2_D2
						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
					>;
					fsl,drive-strength = <MXS_DRIVE_8mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_ENABLE>;
				};

				mmc2_cd_cfg: mmc2-cd-cfg@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
					>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				mmc2_sck_cfg_a: mmc2-sck-cfg@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_SSP0_DATA7__SSP2_SCK
					>;
					fsl,drive-strength = <MXS_DRIVE_12mA>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				mmc2_sck_cfg_b: mmc2-sck-cfg@1 {
					reg = <1>;
					fsl,pinmux-ids = <
						MX28_PAD_SSP2_SCK__SSP2_SCK
					>;
					fsl,drive-strength = <MXS_DRIVE_12mA>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				i2c0_pins_a: i2c0@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_I2C0_SCL__I2C0_SCL
						MX28_PAD_I2C0_SDA__I2C0_SDA
					>;
					fsl,drive-strength = <MXS_DRIVE_8mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_ENABLE>;
				};

				i2c0_pins_b: i2c0@1 {
					reg = <1>;
					fsl,pinmux-ids = <
						MX28_PAD_AUART0_RX__I2C0_SCL
						MX28_PAD_AUART0_TX__I2C0_SDA
					>;
					fsl,drive-strength = <MXS_DRIVE_8mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_ENABLE>;
				};

				i2c1_pins_a: i2c1@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_PWM0__I2C1_SCL
						MX28_PAD_PWM1__I2C1_SDA
					>;
					fsl,drive-strength = <MXS_DRIVE_8mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_ENABLE>;
				};

				i2c1_pins_b: i2c1@1 {
					reg = <1>;
					fsl,pinmux-ids = <
						MX28_PAD_AUART2_CTS__I2C1_SCL
						MX28_PAD_AUART2_RTS__I2C1_SDA
					>;
					fsl,drive-strength = <MXS_DRIVE_8mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_ENABLE>;
				};

				saif0_pins_a: saif0@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_SAIF0_MCLK__SAIF0_MCLK
						MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
						MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
						MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
					>;
					fsl,drive-strength = <MXS_DRIVE_12mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_ENABLE>;
				};

				saif0_pins_b: saif0@1 {
					reg = <1>;
					fsl,pinmux-ids = <
						MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
						MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
						MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
					>;
					fsl,drive-strength = <MXS_DRIVE_12mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_ENABLE>;
				};

				saif1_pins_a: saif1@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0
					>;
					fsl,drive-strength = <MXS_DRIVE_12mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_ENABLE>;
				};

				pwm0_pins_a: pwm0@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_PWM0__PWM_0
					>;
					fsl,drive-strength = <MXS_DRIVE_4mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				pwm2_pins_a: pwm2@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_PWM2__PWM_2
					>;
					fsl,drive-strength = <MXS_DRIVE_4mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				pwm3_pins_a: pwm3@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_PWM3__PWM_3
					>;
					fsl,drive-strength = <MXS_DRIVE_4mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				pwm3_pins_b: pwm3@1 {
					reg = <1>;
					fsl,pinmux-ids = <
						MX28_PAD_SAIF0_MCLK__PWM_3
					>;
					fsl,drive-strength = <MXS_DRIVE_4mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				pwm4_pins_a: pwm4@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_PWM4__PWM_4
					>;
					fsl,drive-strength = <MXS_DRIVE_4mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				lcdif_24bit_pins_a: lcdif-24bit@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_LCD_D00__LCD_D0
						MX28_PAD_LCD_D01__LCD_D1
						MX28_PAD_LCD_D02__LCD_D2
						MX28_PAD_LCD_D03__LCD_D3
						MX28_PAD_LCD_D04__LCD_D4
						MX28_PAD_LCD_D05__LCD_D5
						MX28_PAD_LCD_D06__LCD_D6
						MX28_PAD_LCD_D07__LCD_D7
						MX28_PAD_LCD_D08__LCD_D8
						MX28_PAD_LCD_D09__LCD_D9
						MX28_PAD_LCD_D10__LCD_D10
						MX28_PAD_LCD_D11__LCD_D11
						MX28_PAD_LCD_D12__LCD_D12
						MX28_PAD_LCD_D13__LCD_D13
						MX28_PAD_LCD_D14__LCD_D14
						MX28_PAD_LCD_D15__LCD_D15
						MX28_PAD_LCD_D16__LCD_D16
						MX28_PAD_LCD_D17__LCD_D17
						MX28_PAD_LCD_D18__LCD_D18
						MX28_PAD_LCD_D19__LCD_D19
						MX28_PAD_LCD_D20__LCD_D20
						MX28_PAD_LCD_D21__LCD_D21
						MX28_PAD_LCD_D22__LCD_D22
						MX28_PAD_LCD_D23__LCD_D23
					>;
					fsl,drive-strength = <MXS_DRIVE_4mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				lcdif_18bit_pins_a: lcdif-18bit@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_LCD_D00__LCD_D0
						MX28_PAD_LCD_D01__LCD_D1
						MX28_PAD_LCD_D02__LCD_D2
						MX28_PAD_LCD_D03__LCD_D3
						MX28_PAD_LCD_D04__LCD_D4
						MX28_PAD_LCD_D05__LCD_D5
						MX28_PAD_LCD_D06__LCD_D6
						MX28_PAD_LCD_D07__LCD_D7
						MX28_PAD_LCD_D08__LCD_D8
						MX28_PAD_LCD_D09__LCD_D9
						MX28_PAD_LCD_D10__LCD_D10
						MX28_PAD_LCD_D11__LCD_D11
						MX28_PAD_LCD_D12__LCD_D12
						MX28_PAD_LCD_D13__LCD_D13
						MX28_PAD_LCD_D14__LCD_D14
						MX28_PAD_LCD_D15__LCD_D15
						MX28_PAD_LCD_D16__LCD_D16
						MX28_PAD_LCD_D17__LCD_D17
					>;
					fsl,drive-strength = <MXS_DRIVE_4mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				lcdif_16bit_pins_a: lcdif-16bit@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_LCD_D00__LCD_D0
						MX28_PAD_LCD_D01__LCD_D1
						MX28_PAD_LCD_D02__LCD_D2
						MX28_PAD_LCD_D03__LCD_D3
						MX28_PAD_LCD_D04__LCD_D4
						MX28_PAD_LCD_D05__LCD_D5
						MX28_PAD_LCD_D06__LCD_D6
						MX28_PAD_LCD_D07__LCD_D7
						MX28_PAD_LCD_D08__LCD_D8
						MX28_PAD_LCD_D09__LCD_D9
						MX28_PAD_LCD_D10__LCD_D10
						MX28_PAD_LCD_D11__LCD_D11
						MX28_PAD_LCD_D12__LCD_D12
						MX28_PAD_LCD_D13__LCD_D13
						MX28_PAD_LCD_D14__LCD_D14
						MX28_PAD_LCD_D15__LCD_D15
					>;
					fsl,drive-strength = <MXS_DRIVE_4mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				lcdif_sync_pins_a: lcdif-sync@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_LCD_RS__LCD_DOTCLK
						MX28_PAD_LCD_CS__LCD_ENABLE
						MX28_PAD_LCD_RD_E__LCD_VSYNC
						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
					>;
					fsl,drive-strength = <MXS_DRIVE_4mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				can0_pins_a: can0@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_GPMI_RDY2__CAN0_TX
						MX28_PAD_GPMI_RDY3__CAN0_RX
					>;
					fsl,drive-strength = <MXS_DRIVE_4mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				can1_pins_a: can1@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_GPMI_CE2N__CAN1_TX
						MX28_PAD_GPMI_CE3N__CAN1_RX
					>;
					fsl,drive-strength = <MXS_DRIVE_4mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				spi2_pins_a: spi2@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_SSP2_SCK__SSP2_SCK
						MX28_PAD_SSP2_MOSI__SSP2_CMD
						MX28_PAD_SSP2_MISO__SSP2_D0
						MX28_PAD_SSP2_SS0__SSP2_D3
					>;
					fsl,drive-strength = <MXS_DRIVE_8mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_ENABLE>;
				};

				spi3_pins_a: spi3@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_AUART2_RX__SSP3_D4
						MX28_PAD_AUART2_TX__SSP3_D5
						MX28_PAD_SSP3_SCK__SSP3_SCK
						MX28_PAD_SSP3_MOSI__SSP3_CMD
						MX28_PAD_SSP3_MISO__SSP3_D0
						MX28_PAD_SSP3_SS0__SSP3_D3
					>;
					fsl,drive-strength = <MXS_DRIVE_8mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				spi3_pins_b: spi3@1 {
					reg = <1>;
					fsl,pinmux-ids = <
						MX28_PAD_SSP3_SCK__SSP3_SCK
						MX28_PAD_SSP3_MOSI__SSP3_CMD
						MX28_PAD_SSP3_MISO__SSP3_D0
						MX28_PAD_SSP3_SS0__SSP3_D3
					>;
					fsl,drive-strength = <MXS_DRIVE_8mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_ENABLE>;
				};

				usb0_pins_a: usb0@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
					>;
					fsl,drive-strength = <MXS_DRIVE_12mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				usb0_pins_b: usb0@1 {
					reg = <1>;
					fsl,pinmux-ids = <
						MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
					>;
					fsl,drive-strength = <MXS_DRIVE_12mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				usb1_pins_a: usb1@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
					>;
					fsl,drive-strength = <MXS_DRIVE_12mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				usb1_pins_b: usb1@1 {
					reg = <1>;
					fsl,pinmux-ids = <
						MX28_PAD_PWM2__USB1_OVERCURRENT
					>;
					fsl,drive-strength = <MXS_DRIVE_12mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				usb0_id_pins_a: usb0id@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_AUART1_RTS__USB0_ID
					>;
					fsl,drive-strength = <MXS_DRIVE_12mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_ENABLE>;
				};

				usb0_id_pins_b: usb0id1@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_PWM2__USB0_ID
					>;
					fsl,drive-strength = <MXS_DRIVE_12mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_ENABLE>;
				};

			};

			digctl: digctl@8001c000 {
				compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
				reg = <0x8001c000 0x2000>;
				interrupts = <89>;
				status = "disabled";
			};

			etm: etm@80022000 {
				reg = <0x80022000 0x2000>;
				status = "disabled";
			};

			dma_apbx: dma-controller@80024000 {
				compatible = "fsl,imx28-dma-apbx";
				reg = <0x80024000 0x2000>;
				interrupts = <78>, <79>, <66>, <0>,
					     <80>, <81>, <68>, <69>,
					     <70>, <71>, <72>, <73>,
					     <74>, <75>, <76>, <77>;
				#dma-cells = <1>;
				dma-channels = <16>;
				clocks = <&clks 26>;
			};

			dcp: crypto@80028000 {
				compatible = "fsl,imx28-dcp";
				reg = <0x80028000 0x2000>;
				interrupts = <52>, <53>, <54>;
				status = "okay";
			};

			pxp: pxp@8002a000 {
				reg = <0x8002a000 0x2000>;
				interrupts = <39>;
				status = "disabled";
			};

			ocotp: efuse@8002c000 {
				compatible = "fsl,imx28-ocotp", "fsl,ocotp";
				#address-cells = <1>;
				#size-cells = <1>;
				reg = <0x8002c000 0x2000>;
				clocks = <&clks 25>;
			};

			axi-ahb@8002e000 {
				reg = <0x8002e000 0x2000>;
				status = "disabled";
			};

			lcdif: lcdif@80030000 {
				compatible = "fsl,imx28-lcdif";
				reg = <0x80030000 0x2000>;
				interrupts = <38>;
				clocks = <&clks 55>;
				dmas = <&dma_apbh 13>;
				dma-names = "rx";
				status = "disabled";
			};

			can0: can@80032000 {
				compatible = "fsl,imx28-flexcan";
				reg = <0x80032000 0x2000>;
				interrupts = <8>;
				clocks = <&clks 58>, <&clks 58>;
				clock-names = "ipg", "per";
				status = "disabled";
			};

			can1: can@80034000 {
				compatible = "fsl,imx28-flexcan";
				reg = <0x80034000 0x2000>;
				interrupts = <9>;
				clocks = <&clks 59>, <&clks 59>;
				clock-names = "ipg", "per";
				status = "disabled";
			};

			simdbg: simdbg@8003c000 {
				reg = <0x8003c000 0x200>;
				status = "disabled";
			};

			simgpmisel: simgpmisel@8003c200 {
				reg = <0x8003c200 0x100>;
				status = "disabled";
			};

			simsspsel: simsspsel@8003c300 {
				reg = <0x8003c300 0x100>;
				status = "disabled";
			};

			simmemsel: simmemsel@8003c400 {
				reg = <0x8003c400 0x100>;
				status = "disabled";
			};

			gpiomon: gpiomon@8003c500 {
				reg = <0x8003c500 0x100>;
				status = "disabled";
			};

			simenet: simenet@8003c700 {
				reg = <0x8003c700 0x100>;
				status = "disabled";
			};

			armjtag: armjtag@8003c800 {
				reg = <0x8003c800 0x100>;
				status = "disabled";
			};
		};

		apbx@80040000 {
			compatible = "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0x80040000 0x40000>;
			ranges;

			clks: clkctrl@80040000 {
				compatible = "fsl,imx28-clkctrl";
				reg = <0x80040000 0x2000>;
				#clock-cells = <1>;
			};

			saif0: saif@80042000 {
				#sound-dai-cells = <0>;
				compatible = "fsl,imx28-saif";
				reg = <0x80042000 0x2000>;
				interrupts = <59>;
				#clock-cells = <0>;
				clocks = <&clks 53>;
				dmas = <&dma_apbx 4>;
				dma-names = "rx-tx";
				status = "disabled";
			};

			power: power@80044000 {
				reg = <0x80044000 0x2000>;
				status = "disabled";
			};

			saif1: saif@80046000 {
				#sound-dai-cells = <0>;
				compatible = "fsl,imx28-saif";
				reg = <0x80046000 0x2000>;
				interrupts = <58>;
				clocks = <&clks 54>;
				dmas = <&dma_apbx 5>;
				dma-names = "rx-tx";
				status = "disabled";
			};

			lradc: lradc@80050000 {
				compatible = "fsl,imx28-lradc";
				reg = <0x80050000 0x2000>;
				interrupts = <10>, <14>, <15>, <16>, <17>, <18>, <19>,
					     <20>, <21>, <22>, <23>, <24>, <25>;
				status = "disabled";
				clocks = <&clks 41>;
				#io-channel-cells = <1>;
			};

			spdif: spdif@80054000 {
				reg = <0x80054000 0x2000>;
				interrupts = <45>;
				dmas = <&dma_apbx 2>;
				dma-names = "tx";
				status = "disabled";
			};

			mxs_rtc: rtc@80056000 {
				compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
				reg = <0x80056000 0x2000>;
				interrupts = <29>;
			};

			i2c0: i2c@80058000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx28-i2c";
				reg = <0x80058000 0x2000>;
				interrupts = <111>;
				clock-frequency = <100000>;
				dmas = <&dma_apbx 6>;
				dma-names = "rx-tx";
				status = "disabled";
			};

			i2c1: i2c@8005a000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx28-i2c";
				reg = <0x8005a000 0x2000>;
				interrupts = <110>;
				clock-frequency = <100000>;
				dmas = <&dma_apbx 7>;
				dma-names = "rx-tx";
				status = "disabled";
			};

			pwm: pwm@80064000 {
				compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
				reg = <0x80064000 0x2000>;
				clocks = <&clks 44>;
				#pwm-cells = <3>;
				fsl,pwm-number = <8>;
				status = "disabled";
			};

			timer: timrot@80068000 {
				compatible = "fsl,imx28-timrot", "fsl,timrot";
				reg = <0x80068000 0x2000>;
				interrupts = <48>, <49>, <50>, <51>;
				clocks = <&clks 26>;
			};

			auart0: serial@8006a000 {
				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
				reg = <0x8006a000 0x2000>;
				interrupts = <112>;
				dmas = <&dma_apbx 8>, <&dma_apbx 9>;
				dma-names = "rx", "tx";
				clocks = <&clks 45>;
				status = "disabled";
			};

			auart1: serial@8006c000 {
				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
				reg = <0x8006c000 0x2000>;
				interrupts = <113>;
				dmas = <&dma_apbx 10>, <&dma_apbx 11>;
				dma-names = "rx", "tx";
				clocks = <&clks 45>;
				status = "disabled";
			};

			auart2: serial@8006e000 {
				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
				reg = <0x8006e000 0x2000>;
				interrupts = <114>;
				dmas = <&dma_apbx 12>, <&dma_apbx 13>;
				dma-names = "rx", "tx";
				clocks = <&clks 45>;
				status = "disabled";
			};

			auart3: serial@80070000 {
				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
				reg = <0x80070000 0x2000>;
				interrupts = <115>;
				dmas = <&dma_apbx 14>, <&dma_apbx 15>;
				dma-names = "rx", "tx";
				clocks = <&clks 45>;
				status = "disabled";
			};

			auart4: serial@80072000 {
				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
				reg = <0x80072000 0x2000>;
				interrupts = <116>;
				dmas = <&dma_apbx 0>, <&dma_apbx 1>;
				dma-names = "rx", "tx";
				clocks = <&clks 45>;
				status = "disabled";
			};

			duart: serial@80074000 {
				compatible = "arm,pl011", "arm,primecell";
				reg = <0x80074000 0x1000>;
				interrupts = <47>;
				clocks = <&clks 45>, <&clks 26>;
				clock-names = "uartclk", "apb_pclk";
				status = "disabled";
			};

			usbphy0: usbphy@8007c000 {
				compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
				reg = <0x8007c000 0x2000>;
				clocks = <&clks 62>;
				status = "disabled";
			};

			usbphy1: usbphy@8007e000 {
				compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
				reg = <0x8007e000 0x2000>;
				clocks = <&clks 63>;
				status = "disabled";
			};
		};
	};

	ahb@80080000 {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0x80080000 0x80000>;
		ranges;

		usb0: usb@80080000 {
			compatible = "fsl,imx28-usb", "fsl,imx27-usb";
			reg = <0x80080000 0x10000>;
			interrupts = <93>;
			clocks = <&clks 60>;
			fsl,usbphy = <&usbphy0>;
			status = "disabled";
		};

		usb1: usb@80090000 {
			compatible = "fsl,imx28-usb", "fsl,imx27-usb";
			reg = <0x80090000 0x10000>;
			interrupts = <92>;
			clocks = <&clks 61>;
			fsl,usbphy = <&usbphy1>;
			dr_mode = "host";
			status = "disabled";
		};

		dflpt: dflpt@800c0000 {
			reg = <0x800c0000 0x10000>;
			status = "disabled";
		};

		mac0: ethernet@800f0000 {
			compatible = "fsl,imx28-fec";
			reg = <0x800f0000 0x4000>;
			interrupts = <101>;
			clocks = <&clks 57>, <&clks 57>, <&clks 64>;
			clock-names = "ipg", "ahb", "enet_out";
			status = "disabled";
		};

		mac1: ethernet@800f4000 {
			compatible = "fsl,imx28-fec";
			reg = <0x800f4000 0x4000>;
			interrupts = <102>;
			clocks = <&clks 57>, <&clks 57>;
			clock-names = "ipg", "ahb";
			status = "disabled";
		};

		eth_switch: switch@800f8000 {
			reg = <0x800f8000 0x8000>;
			status = "disabled";
		};
	};

	iio-hwmon {
		compatible = "iio-hwmon";
		io-channels = <&lradc 8>;
	};
};